Trailing-Edge
-
PDP-10 Archives
-
tops10_tools_bb-fp64b-sb
-
10,7/rmtcon/rmtcop.mac
There are 3 other files named rmtcop.mac in the archive. Click here to see a list.
SUBTTL RMTCOP Parsing and Dispatch Module
SEARCH RMTCOT ;Get RMTCON symbols
TTITLE (RMTCOP,\DECVER,\VEDIT,Parsing and Dispatch)
;COPYRIGHT 1985
;LARGE SYSTEMS DIAGNOSTICS GROUP
;DIGITAL EQUIPMENT CORPORATION
;MARLBORO, MASS. 01752
;
; Author: Gary Papazian
;Update Author: Gregory A. Scott
SEARCH MONSYM,MACSYM,UUOSYM,GLXMAC ;Load universals
PROLOG (RMTCOP) ;Set GLXLIB symbols and macros
NOSYM ;No symbol table dump
SALL ;Suppress macro exps
.DIREC FLBLST ;First line binary listing only plesae
.FDSTG==1 ;For TOPS-20
SUBTTL Externs/Interns
;Routines local to this module
INTERN SOUT%%,BOUT%%,PCRLF,TAKCHR,TOPLVL
;Data local to this module
INTERN MONTYP,TAKIFN
;Routines found in RMTCOM
EXTERN RRID,$REMOT,RRCT,CTSAVE,SALLAD
EXTERN CTRSTR,RCADR
;Data found in RMTCOM
EXTERN TRCFLG,SPRFLG,DBGFLG,RRIFLG,TTEXIT,PRTNBR,LEVTAB,CHNTAB
EXTERN TARADH,TARADL,NODADH,NODADL,PWORDH,PWORDL
SUBTTL Storage
;General storage
PDL: BLOCK <PLEN==200> ;Stack
DPDL: BLOCK <DPLEN==200> ;Data stack
MONTYP: BLOCK 1 ;-1 if TOPS-20, 0 if TOPS-10
OPSNUM: BLOCK 1 ;10 if TOPS-10, 20 if TOPS-20
CPUSER: BLOCK 1 ;CPU serial number
CPUTYP: BLOCK 1 ;CPU type in sixbit
;Log/take file strorage
LOGIFN: BLOCK 1 ;IFN/JFN for log file
TAKIFN: BLOCK 1 ;IFN/JFN for take file
;Parser storage
CSB: BLOCK .CMGJB+1 ;The real CSB is here
BUFFER: BLOCK <BUFSIZ==500> ;Command buffer
ATMBUF: BLOCK <ATMSZ==100> ;Atom buffer
GJFBLK: BLOCK <GJFSIZ==.GJRTY+2> ;GTJFN block
;Help file reader storage
HLPBUF: BLOCK ATMSZ ;Atom buffer for help request
HLPLIN: BLOCK ^D135/5 ;Line of help text copied here
HLPEOF: BLOCK 1 ;-1=EOF on help file
HLPIFN: BLOCK 1 ;IFN of help file
SUBTTL GLXLIB Interface Blocks
;* IB - the GLXLIB Interface Block
IB: $BUILD IB.SZ ;Here to build the init block
$SET (IB.PRG,,%%.MOD) ;Program name
$SET (IB.OUT,,BOUT%%) ;Default output routine
$SET (IB.FLG,IT.OCT,1) ;Set open command terminal flag
$EOB ;End of block
;CSB template, BLTed into place at top level parsing
CSBTMP: $BUILD .CMGJB+1
$SET .CMFLG,RHMASK,REPARS ;Reparse address
$SET .CMBFP,,<POINT 7,BUFFER> ;Pointer to input buffer
$SET .CMPTR,,<POINT 7,BUFFER> ;Start the parse at the beginning
$SET .CMCNT,,BUFSIZ*5-1 ;Size of buffer
$SET .CMABP,,<POINT 7,ATMBUF> ;Pointer to start of atom buffer
$SET .CMABC,,ATMSZ*5-1 ;Size of atom buffer
$SET .CMRTY,,<Point 7,PROMPT> ;Prompt (retry) pointer
$SET .CMGJB,,GJFBLK ;GTJFN block
$EOB
;Program prompt
PROMPT: BYTE(7)"R","M","T","C","O","N",76,0 ;RMTCONalglebracket
;Fobs and FBs for opening the take file
TAKFOB: $BUILD (FOB.SZ) ;File open block
$SET (FOB.FD,,TAKFD) ;File descriptor area
$SET (FOB.CW,FB.BSZ,7) ;Seven bit bytes
$EOB
TAKFD: $BUILD (FDXSIZ) ;FD
$SET (.FDLEN,FD.LEN,FDXSIZ) ;Set size of block
$EOB
;FOBs and FDs for opening the LOG file.
LOGFOB: $BUILD (FOB.SZ) ;File open block
$SET (FOB.FD,,LOGFD) ;File descriptor area
$SET (FOB.CW,FB.BSZ,7) ;Seven bit bytes
$EOB
LOGFD: $BUILD (FDXSIZ) ;FD size
$SET (.FDLEN,FD.LEN,FDXSIZ) ;Set size of block
$EOB
;FOBs and FBs for opening the help file
HFOB20: $BUILD (FOB.SZ) ;File open block
$SET (FOB.FD,,HLPFD2) ;File descriptor area
$SET (FOB.CW,FB.BSZ,7) ;Seven bit bytes
$EOB
HLPFD2: $BUILD (.FDSTG+3) ;FD for TOPS-20
$SET (.FDLEN,FD.LEN,.FDSTG+3) ;Set size of block
$SET (.FDSTG,,<ascii/dsk:d/>) ;First 5 characters of filename
$SET (.FDSTG+1,,<ascii/fnis./>) ;Second 5
$SET (.FDSTG+2,,<asciz/hlp/>) ;Last 3
$EOB
HFOB10: $BUILD (FOB.SZ) ;File open block
$SET (FOB.FD,,HLPFD1) ;File descriptor area
$SET (FOB.CW,FB.BSZ,7) ;Seven bit bytes
$EOB
HLPFD1: $BUILD (.FDPPN+1) ;FD for TOPS-10
$SET (.FDLEN,FD.LEN,.FDPPN+1) ;Set size of block
$SET (.FDSTR,,<sixbit/DSK/>) ;Structure
$SET (.FDNAM,,<sixbit/RMTCON/>) ;Filename
$SET (.FDEXT,,<sixbit/HLP/>) ;Extension
$EOB
SUBTTL Command Parsing Tables
;#***********************************************************************
;addr: $STAB ;Start of table
; KEYTAB value,keyword,flags ;value=dispatch addr or table value
; ;keyword=word to parse
; ;flags=keyword flags (CM%INV, etc.)
; $ETAB ;end of table
;#***********************************************************************
;This is the top level command table.
MAINCM: $STAB ;Start command table, top level
KEYTAB CONECT,CONNECT ;Connect (to node/port) command
KEYTAB DISABL,DISABLE ;Disable spear, logging, trace, debug
KEYTAB ENABLE,ENABLE ;Enable spear, logging, trace, debug
KEYTAB .QUIT,EXIT ;Command to exit i.E. Quit
KEYTAB HELP,HELP ;Help command
KEYTAB REQU,IDENTIFY ;Request id command
KEYTAB .QUIT,QUIT ;Quit, exit to kcmon
KEYTAB RDCTRS,READ-COUNTERS ;Read counters
KEYTAB REDEFI,REDEFINE ;Redefine remote tty switch char
KEYTAB SETPW,SET-PASSWORD ;Set password
KEYTAB SHOW,SHOW ;Show local/remote/all node addresses
KEYTAB TAKE,TAKE ;Take commands from file
$ETAB ;End command table, top level
;This table is used with the ENABLE command.
ENATAB: $STAB ;Start of enable command table
KEYTAB EN.DEB,DEBUG ;Enable debug
KEYTAB EN.LOG,LOGGING ;Enable logging command
KEYTAB EN.SPE,SPEAR-REPORTING ;Enable spear command
KEYTAB EN.TRA,TRACE ;Enable program trace
$ETAB ;End of enable command table
;This table is used with the DISABLE command.
DIATAB: $STAB ;Start of enable command table
KEYTAB DA.DEB,DEBUG ;Enable debug
KEYTAB DA.LOG,LOGGING ;Enable logging command
KEYTAB DA.SPE,SPEAR-REPORTING ;Enable spear command
KEYTAB DA.TRA,TRACE ;Enable program trace
$ETAB ;End of enable command table
;These tables are used with the 'CONNECT' command.
CONTAB: $STAB ;Node or port table
KEYTAB .CONN,NODE ;12 digit hex
KEYTAB .CONP,PORT ;0,1,2,3
$ETAB ;End of CONTAB
PRTTAB: $STAB ;Port 0,1,2,3
KEYTAB 0,0 ;Port 0
KEYTAB 1,1 ;Port 1
KEYTAB 2,2 ;Port 2
KEYTAB 3,3 ;Port 3
$ETAB ;End of PRTTAB
;This table is used with the SHOW command.
SHOTAB: $STAB ;Start of display-address table
KEYTAB SHOALL,ALL ;Display state of all
KEYTAB SHODEB,DEBUG ;Display state of debug
KEYTAB SHOLOG,LOGGING ;Display state of logging
KEYTAB SHONOD,NODES ;Display nodes on network
KEYTAB SHOSPE,SPEAR-REPORTING ;Display state of spear
KEYTAB SHOTRA,TRACE ;Display state of trace
$ETAB ;End of display address command table
;This table is used with the REDIRECT command.
.TSWC: $STAB ;Table of exit characters possible
KEYTAB "A"-100,CONTROL-A
KEYTAB "D"-100,CONTROL-D
KEYTAB "E"-100,CONTROL-E
KEYTAB "F"-100,CONTROL-F
KEYTAB "N"-100,CONTROL-N
KEYTAB "P"-100,CONTROL-P
KEYTAB "V"-100,CONTROL-V
KEYTAB "W"-100,CONTROL-W
KEYTAB "X"-100,CONTROL-X
KEYTAB "Z"-100,CONTROL-Z
$ETAB ;End of .TSWC table
;PDB used for Help command.
HLPPRS: FLDDB. (.CMKEY,,MAINCM,<Help about a command,>,,HLPALL)
HLPALL: FLDDB. (.CMTOK,,<Point 7,[ASCIZ/*/]>,<for all of the help file,>,,CFM)
CFM: FLDDB. (.CMCFM)
; **************************************************************************
; * Top level command parser (see COMND JSYS for field/format defs) *
; **************************************************************************
;The macro used to build the command descriptor block is (cmddb.) And has the
;Following format (type,flags,data,help,default,additional command data block),
;The type field will contain the command function code, the function codes are:
;
; .Cmkey= 0 ;keyword .Cmusr= 12 ;user name
; .Cmnum= 1 ;number .Cmcma= 13 ;comma
; .Cmnoi= 2 ;guide (noise) word .Cmini= 14 ;init line
; .Cmswi= 3 ;switch .Cmdev= 16 ;device name
; .Cmifi= 4 ;input file .Cmtxt= 17 ;text to action char
; .Cmofi= 5 ;output file .Cmqst= 21 ;quoted string
; .Cmfil= 6 ;general filespec .Cmuqs= 22 ;unquoted string
; .Cmfld= 7 ;arbitrary field .Cmtok= 23 ;token
; .Cmcfm= 10 ;confirm .Cmnux= 24 ;number delimited
; .Cmdir= 11 ;directory name ; by non-digit
;
;The flag field will contain one of the following flags or will be represented
;By two commas (,,), this indicates to the macro that this field is blank.
;The flags are:
; Cm%hpp ;help pointer is present
; Cm%dpp ;default pointer is present
; Cm%sdh ;suppress default help message
;
;The data field is dependent on the command function, see tops20 monitor call
;Manual commd jsys v544. This field may be omitted by using two commas (,,).
;
;The help field points to a message to be printed if the question mark (?)
;Is typed. This field may be omitted by using two commas (,,).
;
;The default field is pointer to a string to be used if the escape is the first
;Character to be typed. This field may be omitted by using two commas (,,).
;
;The alternate command block is a pointer to a command block to be parsed if
;The parse failed in the first command block. This field may be omited.
;
;The function field is always used but not all other fields are necessarily
;Used. If a field to the right is to be used, the unused fields separating
;The fields must be represented by two commas (,,).
SUBTTL Program Initialization
;;*****************************************************************************
;* Determine if TOPS-10 or TOPS-20, and get GLXLIB going
;;*****************************************************************************
SETUP: MOVE P,[IOWD PLEN,PDL] ;Load stack pointer
MOVE S1,[112,,11] ;Load %CNMNT monitor type word
GETTAB S1, ;This will not call PA1050 on the -20
SETZ S1, ;Oops
TXNE S1,4B23 ;Skip if TOPS-10
SKIPA S1,[XWD .PRIIN,.PRIOU] ;TOPS-20, set up input/output JFNs
SKIPA S1,[XWD 377776,377777] ;TOPS-10, set up fake i/o JFNs
SKIPA S2,[DEC 20] ;TOPS-20, load a twenty
SKIPA S2,[DEC 10] ;TOPS-10, load a ten
SETOM MONTYP ;TOPS-20, set the flag indicating that
MOVEM S1,CSBTMP+.CMIOJ ;Set I/O JFNs properly for -10 or -20
MOVEM S2,OPSNUM ;Set ten or twenty
SKIPE MONTYP ;Skip if TOPS-10
RESET% ;Reset the orange world
SKIPN MONTYP ;Skip if TOPS-20
CALLI 0 ;Reset the blue world
;Get GLXLIB up.
MOVEI S1,IB.SZ ;Load size of the init block
MOVEI S2,IB ; and point to it
$CALL I%INIT ;Init the GLXLIB stuff
SETZM TAKIFN ;Clear any take file's IFN
SETZM LOGIFN ;Clear any log file IFN
$CALL CTSAVE ;Save terminal stuff
;Announce ourselves, set up data areas
$CALL CPUNUM ;Get CPU number, etc.
$TEXT (,<
^I/ANNOUN/^H/[-1]/
For help, type HELP at the program prompt>) ;Announce ourselves
;Enable capabilities if TOPS-20
SKIPN MONTYP ;TOPS-20?
JRST TOPLVL ;Nope, start parsing
MOVEI S1,.FHSLF ;Set up for current process
RPCAP% ;Get my capabilites
TRNN S2,SC%WHL!SC%OPR!SC%MNT ;Any good capabilites present?
$PMSGC (<% Not enough capabilities to run diagnostic - proceeding
>)
MOVEI S1,.FHSLF ;Incase PMSGC called above
MOVE T1,S2 ;Enable all capabilites
EPCAP% ;Enable TOPS-20 capabilities
JRST TOPLVL ;Enter top level parser
;Here to get the CPU number and so on from the monitor.
CPUNUM: SKIPE CPUSER ;Been here before?
$RET ;Yep, avoid GLXLIB bug
$CALL .CPUTY ;Ask GLXLIB for CPU type
CAIL S1,2 ;Is it
CAILE S1,5 ; in known range?
TDZA S2,S2 ;Nope, say nothing
MOVE S2,[EXP 'KI10 ','KL10 ','KS10 ']-2(S1)
MOVEM S2,CPUTYP ;Save sixbit CPU type
SKIPE MONTYP ;Skip if TOPS-10
JRST CPUN20 ;Tops-20
MOVE S1,[20,,11] ;Load %CNSER CPU0 serial number
GETTAB S1, ;Get it
SETZ S1, ;Error- punt it off
MOVEM S1,CPUSER ;Save it there
$RET ;Return to caller
CPUN20: MOVEI S1,.APRID ;Load table for APRID number
GETAB% ;Get it
SETZ S1, ;Error? punt
MOVEM S1,CPUSER ;Save it
$RET ;Return
;Here is the text string output to terminal and log file when we are started.
ANNOUN: ITEXT (<RMTCON Network Interconnect Services
Version ^V/.JBVER##/, ^W/CPUTYP/, TOPS-^D/OPSNUM/, CPU#=^D/CPUSER/
>)
SUBTTL Top Level Parser
;Here on a reparse.
REPARS: MOVE P,[IOWD PLEN,PDL] ;Here on reparse - reset stack
JRST PRSCM3 ; and restart parsing
;Here for top level commands, reloads the stack and parses a new command.
TOPLVL: MOVE P,[IOWD PLEN,PDL] ;Point to the stack (again)
MOVE S1,[XWD CSBTMP,CSB] ;Initialize the CSB by BLTing
BLT S1,CSB+.CMGJB ; the CSB template over it
;Normal commands loop.
PRSCM1: MOVE DP,[IOWD DPLEN,DPDL] ;Reset data stack
SKIPN S1,TAKIFN ;TAKE command in progress?
JRST PRSCM2 ;Not in a take command
HRLM S1,CSB+.CMIOJ ;Take command, set the input JFN
MOVE S1,[Point 7,[0]] ;Point to a zero
MOVEM S1,CSB+.CMRTY ;Reset the prompt to be nothing
PRSCM2: MOVEI S2,[FLDDB. (.CMINI)] ;Load address of init block
$CALL CMDPRS ;Init parser
;Enter here on reparse (after the CMINI call). Parse a keyword and dispatch.
PRSCM3: MOVEI S2,[FLDDB. (.CMKEY,,MAINCM)] ;Point to top level parsing block
$CALL CMDPRS ;parse top level command
HRRZ S1,@CR.RES(S2) ;Get the keyword address
$CALL (S1) ;Dispatch
JRST PRSCM1 ;Get another command
SUBTTL CONNECT Command
; ***********************************************************************
; 1. CONNECT PORT inputs a port number (0-3) & stores it in PRTNBR which
; is used as the CHANNEL-ID in LLMOP argument blocks.
;
; 2. CONNECT NODE inputs a 12 digit hex number (no spaces allowed) & stores
; it in TARADH & TARADL which is used as the destination address in the
; RESERVE CONSOLE argument block & other LLMOP's.
; ***********************************************************************
CONECT: MOVEI S2,[FLDDB. (.CMKEY,,CONTAB)] ;Point to connect table
$CALL CMDPRS ;Parse command
HRRZ S1,@CR.RES(S2) ;Get the keyword address
PJRST (S1) ;Dispatch
;Here for CONNECT PORT n
.CONP: MOVEI S2,[FLDDB. (.CMNOI,,<Point 7,[ASCIZ/number/]>)] ;Noise word
$CALL CMDPRS ;Output the noise
MOVEI S2,[FLDDB. (.CMKEY,,PRTTAB)] ;Point to port block
$CALL CMDPRS ;Parse the port number
HRRZ S1,@CR.RES(S2) ;Get port number
$CALL CMDCFM ;Confirm command first
MOVEM S1,PRTNBR ;Save
$RET
;Here for CONNECT ADDRESS nnnnnnnnnnnnnnnn
.CONN: MOVEI S2,[FLDDB. (.CMNOI,,<Point 7,[ASCIZ/address/]>)] ;Noise word
$CALL CMDPRS ;Output the noise
MOVEI S2,[FLDDB. (.CMFLD,,,<12 digit HEX address>)]
$CALL CMDPRS ;Parse that
$CALL HEX ;Input hex digits
CAIE T2,^D12 ;12 Digits ?
JRST [$CALL CMDLOG ;Log the command
$PMSGR <? Illegal format of HEX address>] ;Report error/return
$CALL CMDCFM ;Confirm that command
MOVEM P2,TARADH ;Put node number and entry bit in table
MOVEM P3,TARADL
PJRST $REMOT ;Do RCSEND & RCPOLL's (in RMTCOM)
SUBTTL ENABLE Command
;#***********************************************************************
; Enable debug, logging, spear or trace
;#***********************************************************************
ENABLE: MOVEI S2,[FLDDB. (.CMKEY,,ENATAB)] ;Enable commands
$CALL CMDPRS ;Parse keyword
HRRZ S1,@CR.RES(S2) ;Get the keyword address
PJRST (S1) ;Dispatch
;Here for ENABLE DEBUG
EN.DEB: SKIPE DBGFLG ;Skip if debugging now
JRST [$CALL CMDLOG ;Log the command
$PMSGR (<? Debug mode is already enabled>)] ;Give message
$CALL CMDCFM ;Confirm that command
SETOM DBGFLG ;Enable debug
$RET ;Return
;Here to ENABLE SPEAR-REPORTING
EN.SPE: SKIPE SPRFLG ;Skip if spearing now
JRST [$CALL CMDLOG ;Log the command
$PMSGR (<? SPEAR Reporting is already enabled>)]
SKIPN MONTYP ;Must be a TOPS-20 system
JRST [$CALL CMDLOG ;Log the command
$PMSGR (<? Cannot enable SPEAR reporting on TOPS-10>)]
$CALL CMDCFM ;Confirm that command
SETOM SPRFLG ;Enable spear
$RET
;Here to ENABLE TRACE
EN.TRA: SKIPE TRCFLG ;Skip if spearing now
JRST [$CALL CMDLOG ;Log the command
$PMSGR (<? Trace mode is already enabled>)]
$CALL CMDCFM ;Confirm that command
SETOM TRCFLG ;Enable trace
$RET
;Here for ENABLE LOGGING
EN.LOG: SKIPE LOGIFN ;Logging enabled now?
JRST [$CALL CMDLOG ;Log the command
$PMSGR (<? Logging is already enabled, type DISABLE LOGGING first>)]
MOVEI S2,[FLDDB. (.CMNOI,,<Point 7,[ASCIZ/to file/]>)]
$CALL CMDPRS ;Do it
SETZM GJFBLK ;Clear first word
MOVE S1,[GJFBLK,,GJFBLK+1] ;Set up to clear block
BLT S1,GJFBLK+GJFSIZ-1 ;Clear the block
SKIPN MONTYP ;Skip if TOPS-20
JRST EN.LO5 ;TOPS-10
;TOPS-20 ENABLE LOGGING command
MOVX S1,GJ%FOU ;File is for output
MOVEM S1,GJFBLK+.GJGEN ; into flags word
MOVE S1,CSB+.CMIOJ ;Load I/O JFNs
MOVEM S1,GJFBLK+.GJSRC ; into block
HRROI S1,[ASCIZ/RMTCON/] ;Point at default file name
MOVEM S1,GJFBLK+.GJNAM ;Save for GTJFN
HRROI S1,[ASCIZ/LOG/] ;Default extension
MOVEM S1,GJFBLK+.GJEXT ;Save in GTJFN block
HRROI S1,[ASCIZ/DSK/] ;Get the default structure
MOVEM S1,GJFBLK+.GJDEV ;Save the device
MOVEI S2,[FLDDB. (.CMFIL,,,,<RMTCON.LOG>)] ;Output file type
$CALL CMDPRS ;Hello GLXLIB
MOVE S2,CR.RES(S2) ;Load the resulting JFN
$CALL CMDCFM ;Confirm that
HRROI S1,LOGFD+.FDSTG ;Point to the FD
MOVX T1,FLD(.JSAOF,JS%DEV)!FLD(.JSAOF,JS%DIR)!FLD(.JSAOF,JS%NAM)!FLD(.JSAOF,JS%TYP)!FLD(.JSAOF,JS%GEN)!JS%PAF
JFNS% ;JFN to string
ERJMP .+1 ;Error, ignore it
MOVE S1,S2 ;Reload the JFN
RLJFN% ;Release it please
ERJMP .+1 ;Error? Punt it
JRST LOGOPN ;Open the logging file and return
;Here for TOPS-10 ENABLE LOGGING command
EN.LO5: MOVE S1,[SIXBIT/RMTCON/] ;Get file name
STORE S1,GJFBLK+.FDNAM ;Save in default block
MOVSI S1,'CMD' ;Get default extension
STORE S1,GJFBLK+.FDEXT ;Save in block
MOVSI S1,'DSK' ;Get structure name
STORE S1,GJFBLK+.FDSTR ;Save the structure
MOVEI S2,[FLDDB. (.CMOFI,,,,<RMTCON.LOG>)] ;Input file
$CALL CMDPRS ;Hello GLXLIB
MOVE S1,[GJFBLK,,LOGFD] ;Set up to copy into FD
BLT S1,LOGFD+GJFSIZ-1 ;Clear the block
$CALL CMDCFM ;Confirm the command
JRST LOGOPN ;Open the log file and return
SUBTTL DISABLE Command
;#***********************************************************************
; Disable debug, logging, spear or trace
;#***********************************************************************
DISABL: MOVEI S2,[FLDDB. (.CMKEY,,DIATAB)] ;Point to disable table
$CALL CMDPRS ;Parse keyword
HRRZ S1,@CR.RES(S2) ;Get the keyword address
PJRST (S1) ;Dispatch
;Here for DISABLE DEBUG
DA.DEB: SKIPN DBGFLG ;Skip if debugging now
JRST [$CALL CMDLOG ;Log the command
$PMSGR (<? Debug mode is already disabled>)] ;Give msg and ret
$CALL CMDCFM ;Confirm the command
SETZM DBGFLG ;Disable debug
$RET
;Here for DISABLE SPEAR
DA.SPE: SKIPN SPRFLG ;Skip if spearing now
JRST [$CALL CMDLOG ;Log the command
$PMSGR (<? SPEAR is already disabled>)] ;Give message and ret
$CALL CMDCFM ;Confirm the command
SETZM SPRFLG ;Disable spear
$RET
;Here for DISABLE TRACE
DA.TRA: SKIPN TRCFLG ;Skip if trace now
JRST [$CALL CMDLOG ;Log the command
$PMSGR (<? Tracing is already disabled>)] ;Give msg and ret
$CALL CMDCFM ;Confirm the command
SETZM TRCFLG ;Disable trace
$RET
;Here for DISABLE LOGGING
DA.LOG: SKIPN LOGIFN ;Skip if a log file there
JRST [$CALL CMDLOG ;Log the command
$PMSGR (<? Logging was not enabled>)] ;Owie
$CALL CMDCFM ;Confirm the command
PJRST LOGCLS ;Close the log file
SUBTTL REDEFINE Command
;#***************************************************************************
;Redefine the "EXIT CHAR" to be any of those listed below.
;note, the entire word "CONTROL" must be entered.
;#***************************************************************************
REDEFI: MOVEI S2,[FLDDB. (.CMNOI,,<Point 7,[ASCIZ/exit character/]>)]
$CALL CMDPRS ;Do it
MOVEI S2,[FLDDB. (.CMKEY,,.TSWC,,,CFM)]
$CALL CMDPRS ;Parse that command please
HRRZ T1,CR.PDB(S2) ;Load PDB used
CAIN T1,CFM ;Was it a conform?
JRST REDEF1 ;Yes
HRRZ S1,@CR.RES(S2) ;Load the resulting character
$CALL CMDCFM ;Confirm command
MOVEM S1,TTEXIT ;Set it up
REDEF1: MOVE S1,TTEXIT ;Load TTY exit character
ADDI S1,"A"-1 ;Convert to ASCII
$TEXT (,<TTY Exit character = control-^7/S1/>)
$RET ;Return
SUBTTL HELP Command
;Here on a HELP command
HELP: MOVE T4,[POINT 7,HLPBUF] ;Get pointer to help buffer
SETZB T3,HLPBUF ;Make easy check for nothing typed
MOVEI S2,HLPPRS ;Parse to help
$CALL CMDPRS ;Parse it
$CALL HLPATM ;Copy that atom please
;Command has been parsed and thing to get help on is in HLPBUF, set up flags
HELP1: SETZM HLPEOF ;Not EOF on help file
SETZM T4 ;Initially not outputting anything
MOVE S1,HLPBUF ;Load help buffer contents
CAME S1,[ASCIZ/*/] ;Was it star?
SKIPN HLPBUF ;Skip if something typed
SETOB T3,T4 ;Yes, output first text you see
;Open up the help file for reading.
DMOVE S1,[EXP <SIXBIT/DSK/>,<ASCII/dsk:d/>] ;Load first place to look
$CALL HFIND ;Try and find it there
JUMPT HELP2 ;Jump if we got it
DMOVE S1,[EXP <SIXBIT/HLP/>,<ASCII/hlp:d/>] ;Load second place
$CALL HFIND ;Try and find it there
JUMPT HELP2 ;Jump if we got it
DMOVE S1,[EXP <SIXBIT/SYS/>,<ASCII/sys:d/>] ;Load third place to look
$CALL HFIND ;Try and find it there
JUMPF HLPERR ;Jump if we didn't get it
;Ready to read help file, line at a time. First check EOF flag.
HELP2: SKIPE HLPEOF ;Eof?
JRST HELP7 ;Release it and return to top level
$CALL HREAD ;Read in a line from the file
;Check the first character on the line, if its a "*" then we must check more
HELP3: CAIE T1,"*" ;Is it a keyword start?
JRST HELP6 ;Nope
SETZM T4 ;Not outputting text any more
SKIPN HLPBUF ;Skip if some specific help request
SETOM HLPEOF ;Yes, simulate EOF at first "*"
HRROI S2,HLPLIN ;Point to help line
HRROI S1,HLPBUF ;Point to buffer
$CALL S%SCMP ;Call string comparison routine
MOVE S2,HLPBUF ;Load help buffer contents
CAME S2,[ASCIZ/*/] ;Was it star?
SKIPN S1 ;Exact match?
SETOB T3,T4 ;Yes, we should output text now
JRST HELP2 ;Get another line
;Here if line didn't begin with "*", output the line if output flag is set.
HELP6: HRROI S1,HLPLIN ;Point to line of text
SKIPE T4 ;Outputting now?
$CALL SOUT%% ;Output to terminal
JRST HELP2 ;Loop for more
;Here at end of file, determine if something has been printed.
HELP7: SKIPN T3 ;Skip if something was found
$TEXT (,<% Sorry, no information on "^T/HLPBUF/">)
MOVE S1,HLPIFN ;Load the help IFN
PJRST F%REL ;Release it and return
;Here to read a line from the help file into HLPLIN, returns S1/first character
HREAD: MOVE S1,HLPIFN ;Load the IFN
MOVE T2,[Point 7,HLPLIN] ;Load pointer to line of text
$CALL F%IBYT ;Get the first character of the line
JUMPF HREAD2 ;Punt - EOF
CAIE S2,"!" ;Eat this line?
SKIPA T1,S2 ;No, copy the character to T1
SETO T1, ;Indicate it was a comment line
CAIE S2,"*" ;Asterisk?
IDPB S2,T2 ;No, store the 1st character of line
HREAD1: $CALL F%IBYT ;Get a byte
JUMPT HREAD3 ;Jump if not EOF
HREAD2: SETOM HLPEOF ;Now it was an EOF
JRST HREAD5 ;Deposit a null and return
HREAD3: CAIN S2,.CHCRT ;Was it a return?
JRST HREAD1 ;Yes, eat it
CAIN S2,.CHLFD ;Was it a linefeed?
JRST HREAD4 ;Yes, end of line
IDPB S2,T2 ;Store the character
JRST HREAD1 ;Loop
HREAD4: JUMPL T1,HREAD ;If it was a comment start another line
CAIN T1,"*" ;Line start with a star?
JRST HREAD5 ;Yes
MOVEI S2,.CHCRT ;Load a return
IDPB S2,T2 ; and store it
MOVEI S2,.CHLFD ;Load a line feed
IDPB S2,T2 ; and store that
HREAD5: SETZ S2, ;Clear S2
IDPB S2,T2 ;Store it here
$RET ;Return
;Copy atom buffer to help text buffer, returns T1/PDB used
HLPATM: HRRZ T1,CR.PDB(S2) ;Load PDB used
CAIN T1,CFM ;Was it a confirm?
$RET ;Return, all set
CAIN T1,HLPALL ;Was it help all?
JRST HLPAT4 ;yes
HLRZ S1,@CR.RES(S2) ;Get address of ASCIZ text
HRLI S1,(Point 7,) ;Make byte pointer
HLPAT1: ILDB T1,S1 ;Get first character
IDPB T1,T4 ;Not zero, put it in help buffer
JUMPN T1,HLPAT1 ;Not null, loop for more
$RET ;Return
HLPAT4: MOVSI S1,(<ASCIZ/*/>) ;Load a star
MOVEM S1,HLPBUF ;Save it as the request type
JRST CMDCFM ;Confirm it and return
;Here to try and find the help file, called with S1/TOPS-10 dev, S2/TOPS-20 dev
;Returns false if not found, returns true with file open and HLPIFN set.
HFIND: MOVEM S1,HLPFD1+.FDSTR ;Save TOPS-10 structure name
MOVEM S2,HLPFD2+.FDSTG ;Save TOPS-20 first 5 characters
SKIPE MONTYP ;Skip if TOPS-10
SKIPA S2,[HFOB20] ;TOPS-20
MOVEI S2,HFOB10 ;TOPS-10
MOVEI S1,FOB.SZ ;Load size of the FOB
$CALL F%IOPN ;Open up input file
$RETIF ;Return if false
MOVEM S1,HLPIFN ;Save IFN of help file
$RETT ;Return OK
;Here if help file open problem
HLPERR: $TEXT (,<? Help not available - ^E/S1/>)
$RET ;Return
SUBTTL IDENTIFY Command
;#***********************************************************************
;Enter via "IDENTIFY" (addr) Command.
;Node does not have to be selected (reserved).
;The req id will return info (status) on desired node.
;#***********************************************************************
REQU: MOVEI S2,[FLDDB. (.CMNOI,,<Point 7,[ASCIZ/node/]>)]
$CALL CMDPRS ;Do it
MOVEI S2,[FLDDB. (.CMFLD,,,<12 digit HEX address>)]
$CALL CMDPRS ;Parse that
$CALL HEX ;Input hex digits
CAIE T2,^D12 ;12 Digits ?
JRST [$CALL CMDLOG ;Log the command
$PMSGR <? Illegal format of HEX address>] ;Report error/return
$CALL CMDCFM ;Confirm that command
;Save trace flag, do the request id
$SAVE <TRCFLG> ;Save trace flag
SETZM TRCFLG ;No trace right now
SETOM RRIFLG ;Do request ID printout flag
$CALL RRID ;Do Req-ID for this node
SETZM RRIFLG ;Clear req-id flag
$RET ;Return to parser
SUBTTL SET-PASSWORD Command
;#************************************************************************
;Enter via "SET-PASSWORD" command.
;Take up to 16 hex digits & store in PWORDH/L.
;The Password is used in RCRBT & RCRSV
;#************************************************************************
SETPW: MOVEI S2,[FLDDB. (.CMFLD,,,<12 digit HEX password>)]
$CALL CMDPRS ;Parse that
$CALL HEXPW ;Input hex password digits
$CALL CMDCFM ;Confirm that command please
MOVEM P2,PWORDH ;Hi = bytes 7,6,5,4,z
MOVEM P3,PWORDL ;Lo = bytes 3,2,1,0,z
$RET ;Return
SUBTTL READ-COUNTERS Command
;#*************************************************************************
;Enter via "READ-COUNTERS" (addr) Command.
;Node does not have to be selected (reserved).
;The counter information will be returned on the desired node.
;#*************************************************************************
RDCTRS: MOVEI S2,[FLDDB. (.CMNOI,,<Point 7,[ASCIZ/node/]>)]
$CALL CMDPRS ;Do it
MOVEI S2,[FLDDB. (.CMFLD,,,<12 digit HEX address>)]
$CALL CMDPRS ;Parse that
$CALL HEX ;Input hex digits
CAIE T2,^D12 ;12 Digits ?
JRST [$CALL CMDLOG ;Log the command
$PMSGR <? Illegal format of HEX address>] ;Report error/return
$CALL CMDCFM ;Confirm that command
PJRST RRCT ;Do read counters for this node
SUBTTL SHOW Command
;Here for the SHOW command to show things on the terminal.
SHOW: MOVEI S2,[FLDDB. (.CMNOI,,<Point 7,[ASCIZ/current state of/]>)]
$CALL CMDPRS ;Output the noise
MOVEI S2,[FLDDB. (.CMKEY,,SHOTAB)] ;Point to parse table
$CALL CMDPRS ;Parse command
HRRZ S1,@CR.RES(S2) ;Get the keyword address
$CALL CMDCFM ;Confirm that please
PJRST (S1) ;Dispatch
;SHOW LOGGING
SHOLOG: SKIPN LOGIFN ;Is logging enabled?
$PMSGC (<Logging is disabled>) ;Nope
SKIPE LOGIFN ;is logging enabled?
$TEXT (,<Logging is enabled to file ^F/LOGFD/>)
$RET
;SHOW DEBUG
SHODEB: SKIPN DBGFLG ;Is debug enabled?
SKIPA S1,[ASCIZ/dis/] ;Disabled
MOVEI S1,(ASCIZ/en/) ;Enabled
$TEXT (,<Program DEBUG is ^T/S1/abled>)
$RET
;SHOW SPEAR
SHOSPE: SKIPN SPRFLG ;Is spear enabled ?
SKIPA S1,[ASCIZ/dis/] ;Disabled
MOVEI S1,(ASCIZ/en/) ;Enabled
$TEXT (,<Reports to SPEAR are ^T/S1/abled>)
$RET
;SHOW ALL
SHOALL: $CALL SHODEB ;Show debug
$CALL SHOLOG ;Show logging
$CALL SHOSPE ;Show spear
;Fall through to show trace
;SHOW TRACE
SHOTRA: SKIPN TRCFLG ;Is trace enabled ?
SKIPA S1,[ASCIZ/dis/] ;Disabled
MOVEI S1,(ASCIZ/en/) ;Enabled
$TEXT (,<Program TRACE is ^T/S1/abled>)
$RET
;SHOW NODES
SHONOD: PUSHD <TRCFLG> ;Save TRACE flag
SETOM TRCFLG ;Force TRACE
$CALL RCADR ;Do the LLMOP to read local node addr
NOP ; error return
POPD <TRCFLG> ;Restore TRACE
PJRST SALLAD ;All REMOTE NODE addresses on network
SUBTTL TAKE Command
;Here to process TAKE command
TAKE: SKIPE TAKIFN ;In a TAKE already?
JRST TAKE7 ;Yep
SETZM GJFBLK ;Clear first word
MOVE S1,[GJFBLK,,GJFBLK+1] ;Set up to clear block
BLT S1,GJFBLK+GJFSIZ-1 ;Clear the block
MOVEI S2,[FLDDB. (.CMNOI,,<Point 7,[ASCIZ/commands from/]>)]
$CALL CMDPRS ;Do the noise
SKIPN MONTYP ;Skip if TOPS-20
JRST TAKE1 ;TOPS-10
;TOPS-20 take command
MOVX S1,GJ%OLD ;File must exist
MOVEM S1,GJFBLK+.GJGEN ; into flags word
MOVE S1,CSB+.CMIOJ ;Load I/O JFNs
MOVEM S1,GJFBLK+.GJSRC ; into block
HRROI S1,[ASCIZ/RMTCON/] ;Point at default file name
MOVEM S1,GJFBLK+.GJNAM ;Save for GTJFN
HRROI S1,[ASCIZ/CMD/] ;Default extension
MOVEM S1,GJFBLK+.GJEXT ;Save in GTJFN block
HRROI S1,[ASCIZ/DSK/] ;Get the default structure
MOVEM S1,GJFBLK+.GJDEV ;Save the device
MOVEI S2,[FLDDB. (.CMFIL,,,,<RMTCON.CMD>)] ;Input file type
$CALL CMDPRS ;Hello GLXLIB
MOVE S2,CR.RES(S2) ;Load the resulting JFN
$CALL CMDCFM ;Confirm that
HRROI S1,TAKFD+.FDSTG ;Point to the FD
MOVEM S2,TAKIFN ;Save the take JFN
SETZ T1, ;Default format
JFNS% ;JFN to string
ERJMP .+1 ;Error, ignore it
MOVE S1,TAKIFN ;Get the JFN again
MOVX S2,OF%RD!FLD(7,OF%BSZ) ;Read 7 bit bytes
OPENF% ;Pry it open
ERJMP TAKE6 ;Error, punt
JRST TAKE3 ;Give startip message
;Here for TOPS-10 TAKE command
TAKE1: MOVE S1,[SIXBIT/RMTCON/] ;Get file name
STORE S1,GJFBLK+.FDNAM ;Save in default block
MOVSI S1,'CMD' ;Get default extension
STORE S1,GJFBLK+.FDEXT ;Save in block
MOVSI S1,'DSK' ;Get structure name
STORE S1,GJFBLK+.FDSTR ;Save the structure
MOVEI S2,[FLDDB. (.CMIFI,,,,<RMTCON.CMD>)] ;Input file
$CALL CMDPRS ;Hello GLXLIB
MOVE S1,[GJFBLK,,TAKFD] ;Set up to copy into FD
BLT S1,TAKFD+GJFSIZ-1 ;Clear the block
$CALL CMDCFM ;Confirm the command
MOVEI S1,FOB.SZ ;Load size of FOB
MOVEI S2,TAKFOB ;Point to the FOB
$CALL F%IOPN ;Open up the thing
JUMPF TAKE6 ;Punt if an error
MOVEM S1,TAKIFN ;Save the IFN
;Here to give startup message and then return for commands.
TAKE3: $TEXT (,<[Processing ^F/TAKFD/]>)
$RET ;Return to get commands from file
;Here if an error opening the file, etc.
TAKE6: $TEXT (,<? ^E/S1/>) ;Give error message
JRST TAKABT ;Abort the take
;Here if in a take already.
TAKE7: $CALL CMDLOG ;Log the command
$PMSGC (<? Nested TAKE files are illegal>)
;Here to get a character from the take file. Returns FALSE if no char return.
TAKCHR: SKIPN S1,TAKIFN ;Skip if a JFN there
$RETF ;Nope
SKIPN MONTYP ;Skip if orange
JRST TAKCH1 ;Blue, just call GLXFIL
BIN% ;Get a byte please
ERJMP TAKCH2 ;Owie if error
CAIN S2,.CHLFD ;Linefeed?
JRST TAKCHR ;Yep, loop for more charaters
MOVE S1,S2 ;Copy character to S1
$RETT ;Return with byte in S1
TAKCH1: $CALL F%IBYT ;Input a character
JUMPF TAKCH2 ;Jump if an error
CAIN S2,.CHLFD ;Linefeed?
JRST TAKCHR ;Yep, loop for more charaters
MOVE S1,S2 ;Copy to S1
$RETT ;Return if OK, fall thru if not
TAKCH2: $CALL TAKEOF ;Check for EOF
$RETF ;Return with no character
;Here to check if we had an EOF on the take file, gives message if end,
; returns TRUE if it was EOF, false if not take file or not EOF
TAKEOF: SKIPN MONTYP ;Skip if TOPS-20
JRST TAKEO1 ;TOPS-10
SKIPN S1,TAKIFN ;Get input file JFN for take file
$RETF ;No take file so not EOF
GTSTS% ;Get the file's status
TXNN S2,GS%EOF ;At end of file?
$RETF ;Nope, not EOF
JRST TAKEO2 ;Yep
TAKEO1: SKIPE TAKIFN ;Skip if no take file
CAIE S1,EREOF$ ;End of file?
$RETF ;Nope, no take file or not EOF
TAKEO2: $TEXT (,<
[End of ^F/TAKFD/]>) ;End of take file
$CALL TAKABT ;Abort take file and return
$RETT ;Return true, it was EOF
;Here to abort/close a TAKE file
TAKABT: SKIPN S1,TAKIFN ;Skip if an IFN there
$RET ;None there, return now
SKIPE MONTYP ;Skip if TOPS-10
CLOSF% ;TOPS-20, close the file
ERJMP .+1 ;Ignore errors
SKIPN MONTYP ;Skip if TOPS-20
$CALL F%REL ;TOPS-10, release the file
SETZM TAKIFN ;No longer an IFN/JFN
$RET ;Return
SUBTTL QUIT/EXIT Command
;#**************************************************************************
;* QUIT command - Exit this program (NI SERVER) & return to system monitor.
;#**************************************************************************
.QUIT: MOVEI S2,[FLDDB. (.CMNOI,,<Point 7,[ASCIZ/to monitor level/]>)]
$CALL CMDPRS ;Output the noise
$CALL CMDCFM ;Confirm that
$CALL CTRSTR ;Restore controlling terminal
$CALL LOGCLS ;Disable logging
$CALL I%EXIT ;Exit program
SUBTTL Logging Subroutines
;* LOGOPN - Subroutine to open the log file, LOGFB already set up.
LOGOPN: MOVEI S1,FOB.SZ ;Load size of FOB
MOVEI S2,LOGFOB ;Point to the FOB
$CALL F%AOPN ;Open up the thing append mode
JUMPF LOGOP2 ;Error.. punt it
MOVEM S1,LOGIFN ;Save the IFN
$TEXT (LOUT%%,<^I/ANNOUN/^F/LOGFD/ opened at ^H/[-1]/
>) ;Start the log file
$TEXT (T%TTY,<[^F/LOGFD/ opened]>) ;Output logging filename
$RET ;Return
LOGOP2: $TEXT (,<? ^E/S1/, logging not enabled>)
$RET ;Give message and return
;* PCRLF - output CRLF to terminal
PCRLF: $SAVE <S1> ;Save an AC
HRROI S1,[ASCIZ/
/] ;Fall through to SOUT%%
;* SOUT%% - Routine that is called for string output to terminal.
; S1/ address of ASCIZ string
SOUT%%: $SAVE <P1,P2> ;Save an AC
TLO S1,-1 ;Make default byte pointer for PSOUT
MOVEI P1,(S1) ;Load the address of the string
HRLI P1,(Point 7) ;Make a byte pointer out of it
SKIPE MONTYP ;Skip if not TOPS-20
PSOUT% ;Output string to terminal
SKIPN MONTYP ;Skip if not TOPS-10
OUTSTR (S1) ;Output string to terminal
SKIPN LOGIFN ;Skip if a log file opened
$RET ;Nope, return now
SOUT%1: ILDB S1,P1 ;Load a byte
JUMPE S1,.POPJ ;Jump if done
$CALL LOUT%% ;Output the byte to the file
JRST SOUT%1 ;Loop for all bytes in the string
;* BOUT%% - Routine that is called for printing a character in S1.
; Sends character to terminal and log file if opened.
BOUT%%: SKIPE LOGIFN ;Skip if no logging IFN
$CALL LOUT%% ;Output to log file
SKIPE MONTYP ;Skip if not orange
PBOUT% ;Output byte to terminal
SKIPN MONTYP ;Skip if not blue
IONEOU S1 ;Output character to terminal
$RETT ;Return true for GLXTXT
;* LOUT%% - Routine to output character to LOG file, S1/ character
LOUT%%: $SAVE <S1,S2> ;Save the ACs in question
MOVE S2,S1 ;Copy byte to S2
SKIPN S1,LOGIFN ;Load the IFN
$STOP (LOC,Output to Log file when not opened)
$CALL F%OBYT ;Output the byte
$RETIT ;Return if OK
$TEXT (T%TTY,<? Output error to LOG file: ^E/S1/>)
;Fall thru to close LOG file
;* LOGCLS - Suboroutine to close the log file, checks if it was open first
LOGCLS: SKIPN S1,LOGIFN ;Skip and load existing IFN
$RET ;Return now
$TEXT (LOUT%%,<
^F/LOGFD/ closed at ^H/[-1]/>)
$CALL F%REL ;Release the IFN
SETZM LOGIFN ;Clear that IFN
SKIPT ;Skip if it went well
$TEXT (,<? ^F/LOGFD/ close error: ^E/S1/>)
SKIPF ;Skip if it didn't go so well
$TEXT (,<[^F/LOGFD/ closed]>) ;Close message
$RET ;Return OK
SUBTTL Parsing Subroutines
;#**********************************************************************
;* HEX subroutine
;
; This subroutine is called to read in a 12 digit hex node address.
; When inputting the 12 digit address the digits will be in the form:
;
; P2 = Hi addr = z,z,z,z,z,z,1,2,3 rejust to: 1,2,3,4,5,6,7,8,z
; P3 = Lo addr = 4,5,6,7,8,9,10,11,12 rejust to: 9,10,11,12,z,z,z,z,z
;
; The bytes will then be in the form: Hi = 0,1,2,3,z
; Lo = 4,5,z,z,z
;
; This subroutine is also called to read in a 16 digit PASSWORD from RMTCOP
; When inputting the 16 digit password, the digits will be in the form:
;
; P2 = Hi = z,z,1,2,3,4,5,6,7 rejust to: 1,2,3,4,5,6,7,8,z
; P3 = Lo = 8,9,10,11,12,13,14,15,16 rejust to: 9,10,11,12,13,14,15,16,z
;
; PWSWAP will then re-arrange the digits to be:
;
; P2 = Hi = 15,16,13,14,11,12,9,10,z = bytes 7,6,5,4,z
; P3 = Lo = 7,8,5,6,3,4,1,2,z = bytes 3,2,1,0,z
;
; Hyphens will be ignored.
; Any other non hex digit will cause this subroutine to exit.
;#**********************************************************************
HEXPW: TDZA P4,P4 ;Clear P4 (password mode) and skip
HEX: SETO P4, ;Set P4/-1 (address)
SETZB P2,P3 ;Clear p2 and p3
SETZM T2 ;Set digit count to 0
MOVE T3,[POINT 7,ATMBUF] ;Set up byte pointer atom buffer
HEXA: ILDB S1,T3 ;Read in a char
JUMPE S1,HEXC ; 0 = end of field, rejustify it
CAIL S1,60 ;Less than a 0 ?
CAILE S1,71 ;Greater than a 9 ?
JRST HEXD ; Yes check for a-f
SUBI S1,60 ;No, so convert char to hex
HEXB: ROTC P2,4 ;Left 4 places (combined p2/11)
ADD P3,S1 ;Add new number to p3
AOJA T2,HEXA ;Bump digit counter and go get next
HEXD: CAIL S1,"A" ;Less than an "A"
CAILE S1,"F" ;Greater than an "F"
JRST HEXE ; Yes, see if lower case characters
SUBI S1,67 ;Convert char into hex number
JRST HEXB ;Pack it into the hex node number
HEXE: CAIL S1,"A"+40 ;Less than an a
CAILE S1,"F"+40 ;Greater than an f
JRST HEXG ; Yes, see if hyphen
SUBI S1,40+67 ;Make lower case into hex
JRST HEXB ;Pack it into the hex node number
HEXG: CAIE S1,"-" ;hyphen?
JRST HEXX ; no, error...exit
JRST HEXA ;yes, ignore & input next char
HEXC: JUMPN P4,REJUS ;Jump if address mode selected
PJRST PWSWAP ;Swap password bytes around
HEXX: $RET
;#**********************************************************************
;* REJUS subroutine
;
; Rejustifies a node address to the standard format used by
; LLMOP jsys/uuo's argument block.
;
; Upon return, P2 & P3 will be in the following format:
;
; P2 = Hi addr = x,x,x,x,x,x,1,2,3 rejust to: 1,2,3,4,5,6,7,8,z
; P3 = Lo addr = 4,5,6,7,8,9,10,11,12 rejust to: 9,10,11,12,z,z,z,z,z
;#**********************************************************************
REJUS: $SAVE <T1,S2,S1> ;Save some ac's
SETZM S1 ;Clear s1
LDB S2,[POINT 8,P3,^D27] ;Get hex digits 9 and 10
DPB S2,[POINT 8,S1,7] ;Put it in s1
LDB S2,[POINT 8,P3,^D35] ;Get hex digits 11 and 12
DPB S2,[POINT 8,S1,^D15] ;Put it in s1
MOVEM S1,T1 ;Store rejustified lo address
SETZM S1 ;Clear s1
LDB S2,[POINT 8,P2,^D31] ;Get hex digits 1 and 2
DPB S2,[POINT 8,S1,7] ;Put them in s1
LDB S2,[POINT 4,P2,^D35] ;Get hex digit 3
DPB S2,[POINT 4,S1,^D11] ;Put it in s1
LDB S2,[POINT 4,P3,^D3] ;Get hex digit 4
DPB S2,[POINT 4,S1,^D15] ;Put it in s1
LDB S2,[POINT 8,P3,^D11] ;Get hex digits 5 and 6
DPB S2,[POINT 8,S1,^D23] ;Put it in s1
LDB S2,[POINT 8,P3,^D19] ;Get hex digits 7 and 8
DPB S2,[POINT 8,S1,^D31] ;Put it in s1
MOVEM S1,P2 ;Put rejustified Hi addr back in P2
MOVEM T1,P3 ;Put rejustified Lo addr back in P3
$RET
;#**********************************************************************
;* PWSWAP subroutine
;
; Upon return, P2 & P3 will be in the following format:
;
; P2 = Hi bytes = 0,1,2,3,z rejust to: 7,6,5,4,z
; P3 = Lo bytes = 4,5,6,7,z rejust to: 3,2,1,0,z
;#**********************************************************************
PWSWAP: $SAVE <T1,T2,T3,T4> ;Save some ACs
ROTC P2,4 ;Yes, left 4 places combined
ROT P2,4
SETZB T1,T2
MOVE T4,[POINT 8,P2] ;Set byte pointer
ILDB T3,T4 ;Get byte 0
DPB T3,[POINT 8,T2,31] ; & put in T2
ILDB T3,T4 ;Get byte 1
DPB T3,[POINT 8,T2,23] ; & put in T2
ILDB T3,T4 ;Get byte 2
DPB T3,[POINT 8,T2,15] ; & put in T2
ILDB T3,T4 ;Get byte 3
DPB T3,[POINT 8,T2,7] ; & put in T2
ILDB T3,T4 ;Get byte 4
DPB T3,[POINT 8,T1,31] ; & put in T1
ILDB T3,T4 ;Get byte 5
DPB T3,[POINT 8,T1,23] ; & put in T1
ILDB T3,T4 ;Get byte 6
DPB T3,[POINT 8,T1,15] ; & put in T1
ILDB T3,T4 ;Get byte 7
DPB T3,[POINT 8,T1,7] ; & put in T1
DMOVE P2,T1 ;T1,T2 to P2,P3
$RET
;* CMDCFM - subroutine to parse a confirm.
CMDCFM: $SAVE <S1,S2> ;Save 2 ACs
MOVEI S2,CFM ;Just a confirm please
;Fall thru to parse it
;* CMDPRS - Come here to parse a command with function block in S2.
CMDPRS: MOVEI S1,CSB ;Point to the CSB
$CALL S%CMND ;Hello GLXLIB
JUMPF PARERR ;Pass along a false return
MOVE S1,CR.FLG(S2) ;Get flag word of reply block
TXNE S1,CM%NOP ;Was no-parse set?
JRST PARERR ;Yep
HRRZ S1,CR.PDB(S2) ;Load the PDB used
CAIE S1,CFM ;Was it the confirm one
$RET ;No, return to caller
;* CMDLOG - log a the contents of the command parse buffer
CMDLOG: $SAVE <P1,P2> ;Save a couple
MOVE P1,CSB+.CMPTR ;Copy buffer pointer so won't
SETZ P2, ; distrub it when we
IDPB P2,P1 ; insure a null at end of it
SKIPE LOGIFN ;Skip if not logging
$TEXT (LOUT%%,<^T/PROMPT/^T/BUFFER/^A>)
SKIPE TAKIFN ;Skip if not taking
$TEXT (T%TTY,<^T/PROMPT/^T/BUFFER/^A>)
$RET ;Return
;* PARERR - Come here on parse error to print standard message and return.
PARERR: $CALL TAKEOF ;Check for take command file EOF
JUMPT TOPLVL ;Return now if OK, end of take file
PARER1: $CALL S%ERR ;Load error text pointer to S1
SKIPT ;Skip if it was OK
MOVEI S1,[ASCIZ/Command error/] ;No? Load a default message
$CALL CMDLOG ;Log the command
$TEXT (,<? ^T/(S1)/, type HELP for help>) ;Publish message
SKIPN TAKIFN ;Skip if in a take
JRST TOPLVL ;No, restart everything
$TEXT (,<? Aborting TAKE file ^F/TAKFD/>) ;Give me a sign, o Leader
$CALL TAKABT ;Abort it
JRST TOPLVL ; and return to top level parser
SUBTTL Literals
;Here is the literal pool
LIT..P: XLIST ;LIT
LIT
LIST
END SETUP
;;;Local Modes:
;;;Mode: Macro
;;;Comment Column: 40
;;;End: