Trailing-Edge
-
PDP-10 Archives
-
tops10_703a_sys_atpch16_bb-fr67f-bb
-
mongen.exe
There are 26 other files named mongen.exe in the archive. Click here to see a list.
?p @ ?x [>ty7 >2 ] ! INX Q F: zV :g# H {,
COPYRIGHT (C) 1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1982,1984,1986 BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
ALL RIGHTS RESERVED.
G .9GI
.=GA
[email protected] .DGC.N8 .II .MIv .QI7 .TI92 .YI
.^II' .sI9Bp .wIR .{Ia
.~Kc$: /W \@ /[$\@ / [& y7 /a3 /aS /aS /eBf@ / eC& / eC& /%eS
/*e
//ea /3i5
/8+ \$ . d @ D *
\$ / d @ D *
6D *!&}\$ 2 d + h4D h D**f e@@* $ *
` O@ + /=@@ *6 U+ } * @ -$ {Write MONGEN.MIC(Y,N)[Y causes MONGEN to output a .MIC/.CTL
file,which$may,be)used*to automate future runs of MONGEN]: , %GO@ *7@ @@ *& INX " @@ * $ @ /=6@ *f ZJ *6 *+ ,> ( $ * D (
!$Lu, )v 2 , )~\$ d @ 7@ /=, )v7D *+ , [ 2 -, )~, 'V 2 , )~Z *, 'V!"}7D*+ 2 , )~, )v*b 2 ., )~ $ /?, )t /=@` + * /C*$ .8 iSH 9@+J7 + -$ Cannot INIT TTY , )6 *, /I@@ +:` *+ 5!"p@ G @8 *b "5$ 5-$ 4@@ CAUTION@
This MONGEN includes dialog for UNSUPPORTED monitor options.
Digital may not support a monitor generated with such code enabled.@@ , ),, (Td 7D *
!$Lu@b D (/
+ < *
R *
*
H * + <+ F!$>9 D (/@b
+ B *
R *
@h * + B+ F@@ (/-$ E%Can't find FGEN.HLP@ , ),-$ ZWhich GEN(HDW,NET,F,MUNGEN)[
HDW to define hardware configuration
NET to define network configuration
F to define software features
MUNGEN to4include+UNSUPPORTED,questions4inthe otherdialogs]: , %S`` 7 + b7@ * ` -$ a@DSK:MONGEN.MICEwritten@ , ), ` 9B +81B + 5!$Lu5D p5 +8 *RB +9B +H!$X1+D +H@@ +I@@ +I? +H-$ kOutput(DSK:*.MAC): , 'l( 4R o, 'p0R + o-H p, 'p" INX 9X 7 + w, p-$ v? Device *dnot available@ , ),+ c,> ( $ +P D (
b@ 7 + +H-$ ? File * error , ),
B d"-$ *@ , )++ " -$ "File , ),7B p+ %-$ %*: , ), +H-$ '* , ),R +H-$ ).* , ),7B +J+ 0,> . [` -$ -[*, , )+Z +J-$ /*] , )+,^ +8R*-$ 4 Closed [*GEN finished]@@ , ),+ -$ K@@ CAUTION
The MONGEN dialog alters MONGEN so that it includes dialog for devices
not currently supported by Digital.
Digital may not support a monitor generated with such code enabled.@@ , ),-$ lMode(EXIT,ALL,INCLUDE,EXCLUDE,LIST)[
EXIT Exits the MUNGEN configuration dialog
ALL Asks about all known unsupported options
INCLUDE Allows you to include a list of unsupported options by name
EXCLUDE Allows you to exclude a list of unsupported options by name
LIST Allows you to list unsupported option status]: , %S, /U+ K,^x * O@ *@@ * d -$ zSave(Y,N)[
Do you want to save this configured MONGEN on DSK:MUNGEN.EXE for later use]: , %G5B |7@ *+ j+ * O@ *7@ *+ -$ @DSK:MONGEN.MIC written@ , ), $ d D+
& /X+ jINX [Vty7Kb( !0pZ@ @, %G7@ 7 /[ /[!$ +@ 8 *p * ,~ !" -$ Options(Name,Name...or "*")[
Enter one or more option names to be included, delimited by commas.@]: , '@ 4R ", 'p5H 0R + " 4R C+ ", @+ "!$ GD@ @1R + 5R "+ G -$ &@? Unknown option name "*"@ , ),+ !" -$ 2Options(Name,Name...or "*")[
Enter a list of option names to be excluded, delimited by commas@]: , '@ 4R G, 'p5H 70R + ; 4R D+ ;, @+ ;!$ BD@ @1R + 45R ;+ G -$ ?@? Unknown option name "*"@ , ),+ '!0p3H@ ?+ )@8 *p A,~ 7 /[ /[!0p!$ +@ 8 *p E * -$ H@ , ),,~ !0p-$ O
Option State Option State Option State@ , ), @ ?-$ Q* , ),7 @ @+ U-$ T Excluded , ),+ X!" -$ W*Included , ),Z (B&" 0D + /\-$ [@ , ),.0 *p P-$ ^@ , ),-$ _@ , ), * ,~ -$ hUNIVERSAL F - SOFTWARE FEATURE TEST FILE OUTPUT BY MONGEN DIALOG@@@ , ) " -$ lINTERN [email protected]==*@XLIST@ , )6 D+ -$ Feature set(KIFULL,KLFULL,KSFULL)[
KIFULL Includes all Tops-10 features supported for KI10 based systems
KLFULL Same as KIFULL but for KL10 based systems
KSFULL Same as KIFULL but for KS10 based systems]: , %S+ -$ Feature set(KLFULL,KSFULL)[
KLFULL Includes all Tops-10 features supported for KL10 based systems
KSFULL Same as KLFULL but for KS10 based systems]: , %S,> (,>+( (Q$ D -VZ (.$
3d + d 7 + -$ Insufficient user core@ , ) /^, ( + 2 /^@ , (,4R +1R + +02 0r -7 + )02 0r 7 + )0R 1R + )0R + 0/2 `dp R + ! I (, 'o3Hx + /0R + ,+ 1!( GI (+ 1 I (: (+ (Q$ D -W@@ Z( Q *(
$
D (Z -V/ H -W,^x -$ DStandard setting(YES,NO,LIST,EXPLAIN)[
Standard values for all feature test switches for your configuration]: , %S4B 9-$ P@Only standard settings have been tested by DEC
all other settings may produce incorrect operation. @@ , ),<B R, $L+ 8-$ lType "switch,value"(or LIST or EXPLAIN)[
For any feature test switch to define,
type "switch,value", value=0 for off or -1 for on, or
type LIST or EXPLAIN to list or explain switches.
Type one per line, extra carriage return when through.]@@ , )(, (>+ R4R ,> , 'p,^ [ d 1Bm + u
$ / , %i, &+ R, $L+ R0R + d(`4H , % ,> ,> , 'h4R {0R + , 'h5R ,^ ,^ 5$ !& BG -V6@ GG -V+ l!$ " +6(D n 6@ m$ d$`n l"m ,> -$ %New switchW*(Y,N)[if5Y, keep switch, else ignore it]: , %G,^ 4B R!"s6A -W*b END): , %S+ 0-$ 0FT*,0(ON,OFF,LIST,EXPLAIN,END): , %S x 1B + 6=b 8!& BG -V0B GG -V,^ ,^ *d "+ 7,^ ,^ + 9, $L+ %-$ :@LIST@ , )d @ /a, ( + >, (+ C-$ B% Can't find file header in help file@ , ),S -W7C -V+ R,> d"`l"m ,> x -$ HXP *, , ) 6! -V+ L-$ K-1 , )+ N-$ M0 , ),^ , ( + P, (-$ Q@ , ),^ *d C-$ V IF2 <PURGE XP,XPL,XPP>@@ END , ),^ (,~ -$ SUBTTL HDWCNF - HARDWARE CONFIGURATION DEFINITION FILE OUTPUT BY MONGEN@@@ , )-$ cDEFINE XP(A,B),<A==:B>@@@ , ) " f-$ fXP M.GEN,*@ , ), % -a-$ jXP M.KI10,*@ , ) -b-$ mXP M.KL10,*@ , ) -b-$ pXP M.KS10,*@ , ) -X-$ sXP M.1070,*@ , ) -X-$ vXP M.1080,*@ , ) -Y-$ yXP M.1090,*@ , ) -Y-$ |XP M.1091,*@ , ) -Z-$ XP M.2020,*@ , )7B -Z6B -Y+ " 7 C " -$ Cpu's(1,1-*)[Total number of cpu's in the system]: , &7 B -` -`-$
XP M.CPU,*@ , )-$ System name[24 characters or less]: , '0b
7 + -$ % More than 24 characters@ , ),+ " b /a!" -$ DEFINE SYSNAM
< ASCIZ &*&>@ , )E d &$ :.$ ,> &$ ,> " -$ #DEFINE SYSDAT , ), )K-$ %ASCIZ &* , ) B -f,^ " -$ (-* , ) B -f,^ -$ +-*& , ) B -g, )L -f-$ /XP M.MON,*@ , ) -f-$ 2XP M.DAY,*@ , ) -g-$ 5XP M.YEAR,*@ , )@p +9 -$ 9CPU* serial #(1-10000): , &7 B@-c<0 B3B@-c7 + A -$ @? Cannot be same as CPU*@ , ),+ 5=0 ;@@ .1 +9@ 7@ -b6@ -b+ K +9-$ J# DK10's on CPU*(1,0-2)[Real time clock]: , &7 B@-Z7@ O@ +:.B -]: +930 -`+ 6 -c-$ QXP M.C0SN,*@ , ) -c-$ TXP M.C1SN,*@ , ) -d-$ WXP M.C2SN,*@ , ) -d-$ ZXP M.C3SN,*@ , ) -e-$ ]XP M.C4SN,*@ , ) -e-$ `XP M.C5SN,*@ , ) -Z-$ cXP M.RT0,*@ , ) -[-$ fXP M.RT1,*@ , ) -[-$ iXP M.RT2,*@ , ) -\-$ lXP M.RT3,*@ , ) -\-$ oXP M.RT4,*@ , ) -]-$ rXP M.RT5,*@ , ) -]-$ uXP M.RTX,*@ , )6 D+ -$ Exclude monitor overhead from user run time(Y,N)[
Overhead is CPU time spent clock queue processing, command
decoding, swapping, and scheduling.
User run time always includes UUO execution and
unless EBOX/MBOX runtime accounting is selected
(KL10 systems only) includes IO interrupt service time.
On KI systems, each CPU must have a DK10]: , %G+ :-$ :Exclude monitor overhead from user run time(Y,N)[
Overhead is CPU time spent clock queue processing, command
decoding, swapping, and scheduling.
User run time always includes UUO execution and
unless EBOX/MBOX runtime accounting is selected
(KL10 systems only) includes IO interrupt service time.]: , %G-$ <XP M.RTCO,*@ , )7@ -b+ q-$ PEBOX/MBOX runtime accounting(Y,N)[
If EBOX/MBOX runtime accounting is selected in a KL10
based system, user runtime is computed using the KL10
internal accounting clocks]: , %G B -_ -_-$ TXP M.EMRT,*@ , )7@ -_+ t-$ mExclude PI time from user runtime(Y,N)[
An answer of "yes" to this question will cause the monitor
to set up the KL10 accounting meters in such a manner that
users will not be charged for cpu time used during interrupts]: , %G B -` -`-$ pXP M.XPI,*@ , )+ v-$ sXP M.EMRT,0@ , )-$ vXP M.XPI,0@ , )6@ -]6@ -b+
6@ +:+ -$ High precision time accounting(Y,N)[Use DK10 clock for
10 micro-second time accounting]: , %G B -^5B
-$ DK10 software(Y,N)[Include real time clock service routine]: , %G B -_ -^-$ XP M.RTCA,*@ , ) -_-$ XP M.RTC,*@ , )-$ Account verification(Y,N)[LOGIN and the batch system will
verify that the user has specified a valid account]: , %G-$ !XP M.ACV,*@ , ) " 6@ -b6@ -X+ :-$ 9MOS memory(Y,N)[Include support for the user mode MOS memory diagnostic THGA
which collects statistics on single bit memory errors and substitutes the spare
bit when a single bit error is determined to be hard]: , %G-$ <XP M.MOS,*@ , )7B -b+ I-$ HSCA support(Y,N)[Load monitor modules needed to provide Systems
Communications Architecture support]: , %G B .8-$ KXP M.SCA,*@ , )O@ +<6@ -b+ 6 R+ ^-$ ]Auto-Configure(Y,N)[Automatically determine disk/tape configuration when
system starts. Can only be used for RH10, RH20, DX10 devices]: , %G4B A6@ -X+ e-$ dInclude RNXKON(Y,N)[Support for RP20 disks]: , %G7@ l @6@ .86@ -X+ n-$ mInclude RAXKON(Y,N)[Support for disks on the CI bus]: , %G7@ l -$ vInclude TM2KON(Y,N)[Support for TU16/TU45/TU77 tape drives]: , %G7@ l 6 Q+ -$ Include TX1KON(Y,N)[Support for DX10/TU7x tape drives]: , %G7@ l 6@ -X+ /b-$ Include TD2KON(Y,N)[Support for DX20/TU7x tape drives]: , %G7@ l -$ Include T78KON(Y,N)[Support for TU78 tape drives]: , %G7@ l : +<2" -`+ --$ XP M.DPC,0@ , ) -$ XP M.FHD,0@ , ) -$ XP M.FSD,0@ , ) -$ XP M.MDF,0@ , ) 6P g 0 -$ XP M.RPX,*@ , ) -$ #XP M.TAPN,*@ , ) a@ @6@ -X@ -$ (XP M.RNX,*@ , ) a@ 6@ -X@ -$ ,XP M.RAX,*@ , ) + -$ /XP M.P0T,1@ , )-$ 2XP M.N0T,1@ , )-$ 4RP0==650@ , )-$ 6RN0==650@ , )-$ 8RA0==650@ , )O@ +> 0 P +; P -ja@ P -ma@ P -l6@ -X+ $a@ @ P -ja@ P -na@ P -m+ $;B +<O@ +>7 +>O@ +>2" -`+ $6 R+ O-$ N# Data Channels on CPU*(2,0-?)[DF10s, DF10Cs, DX10s or RH20s for disk and tape]: , &7+ W-$ V# Data Channels on CPU*(2,0-?)[DX10s or RH20s for disk and tape]: , &7-$ YXP M.CHN,*@ , ) 4B s B -g@@ +;l " 6@ -Y+ h +;6 R+ d-$ cChannel * Type (DF10,DF10C,DX10,RH20): , %S+ h-$ gChannel * Type (DX10,RH20): , %S." 0b ." B +: +;-$ lXP M.CH*T, , ) +:-$ n*@ , ) +;-$ qXP M.*RH,0@ , ) +;-$ tXP M.*RH,0@ , ) +; +;-$ xOn channel # *:@ , )( +:1B +
8 1B 8 .X -k.X +E +;-$ XP M.*TX,0@ , ) +;-$
XP M.*TX,0@ , ) 6B =
" 6 ]+
+;-$
# RC10s(0-2)[Controllers for RD10 Burroughs disks and
RM10B Bryant drums on channel *]: , &7 +;-$
XP M.*FH, , ) -$
*@ , ) -hd@ B +D4P
- -h-$
XP M.FH*P, , ) +D-$
*@ , ) -h-$
XP FH*CPU, , ) +<-$
!*@ , ): -h." ("}-$
& # Units on FH*(1-4): , &7,> -h." ("}-$
*XP M.FH*, , ),^ -$
,*@ , )=p
6B =
7 +;-$
7 # RH10S for RS04'S(0-3)[Controllers for RS04 swapping
disks on channel *]: , &7 +;-$
:XP M.*FS, , ) -$
<*@ , )`@ @@ +B4P
U -h-$
@XP M.FS*F, , ) " d@ @ -$
C*@ , ) -h-$
FXP FS*CPU, , ) +<-$
H*@ , ): -h: +B." ("}-$
N # Units on FS*(1-8): , &7,> -h." ("}-$
RXP M.FS*, , ),^ -$
T*@ , ) =p
>5X
a +;-$
` # RH10S for RP04'S,RP06'S(0-3)[Controllers for RP04,RP06
disk pack units on channel *]: , &7+
m +;-$
l # RH20S for RP04'S,RP06'S,RP07'S(0-1)[Controllers for RP04,RP06,RP07
disk pack units on channel *]: , &7 +;-$
oXP M.*RP, , ) -$
q*@ , ) -j`@ B +C4P -j-$
vXP M.P*F, , ) " d@ @ -$
y*@ , ) -j-$
|XP RP*CPU, , ) +<-$
~*@ , ): `-i: -j." ("},> -$ # Units on RP*(1-8): , &7*x -$ XP M.RP*, , ),^ -$ *@ , ) -j/4 -$
XP M.P*T, , )6B +E-$ *@ , ) -j/" -$ XP M.RS*P, , ) +B-$ *@ , )=p
t7B + +;-$ # RH20S for RP20'S(0-1)[Controllers for RP20
disk units on channel *.]: , &7 -jd@ B +C +;-$ #XP M.*RN, , ) -$ %*@ , )4T <" S` -j-$ *XP RN*CPU, , ) +<-$ ,*@ , ): -j." ("},> -$ 1 # Units on RN*(1-16): , &7*x -$ 4XP M.RN*, , ),^ -$ 6*@ , ) -j/4 -$ 9XP M.N*T, , ) +E-$ ;*@ , )*p '@ +;-$ ?XP M.*RA, , )-$ @*@ , )6B = M +;-$ L # RP10s(0-3)[Controllers for Memorex and ISS RP02 and RP03
disk pack units on channel *]: , &7 +;-$ OXP M.*DP, , ) -$ Q*@ , ) -kd@ B +D4P i -k-$ VXP M.DP*P, , ) +D-$ X*@ , ) -k-$ [XP DP*CPU, , ) +<-$ ]*@ , ): -k." ("}-$ b # Units on DP*(1-8): , &7,> -k." ("}-$ fXP M.DP*, , ),^ -$ h*@ , )=p T6B = s +;-$ s # TM10Bs(0-2)[Tape Controller for NRZI only drives
on channel *]: , &7 +;-$ vXP M.*TB, , ) -$ x*@ , ) -ld@ B +B4P
: -l: +>-$ }XP M.MT*T,1@ , )-$
XP M.T1*P, , ) +B-$
*@ , ), +
+;-$
# RH20's for DX20's (0-1)[Mass-bus tape controller for
DX20's on channel *]: , &7 +;-$
XP M.*D2, , ) -$
*@ , )d@ @@@ +A4P
J " +
% +E/" -$
$ # DX20's on RH20 * (1-8)[Programmed Device Adapters
driving up to 8 TU7x tape drives through a TX02 Tape Control Unit]: , &7 : +> -$
(XP M.D2*T, , )?T +E 4 : +E -$
,*@ , ) +>-$
/XP M.MT*T,6@ , ) +>-$
2XP M.MT*C, , ) +;-$
4*@ , ) +>-$
7XP M.MT*P, , ) +<-$
9*@ , ) +>-$
<XP M.MT*U, , ) +<-$
>*@ , ): +<: -m +A-$
C # Units on DX20 * (1-8): , &7 : +A +>-$
GXP M.MT*, , ) -$
I*@ , )=p
%5X
V +;-$
U # RH10's for TM02'S (0-2)[Mass-Bus tape controller for
TU16's and TU45's on channel *]: , &7+
a +;-$
` # RH20's for TM02'S (0-1)[Mass-Bus tape controller for
TU16's and TU45's on channel *]: , &7 +;-$
cXP M.*T2, , ) -$
e*@ , )d@ @@ +@4P
s-$
r How many TM02's on RH10 # * (1-8)[EACH UNIT CAN CONTROL
UP TO 8 SUB-UNITS = TAPE DRIVES]: , &7+
~-$
} How many TM02's on RH20 # * (1-8)[EACH UNIT CAN CONTROL
UPPTO.82SUB-UNITS =)TAPE DRIVES]: , &7 @ +>.4 -$
: +@7B + r TM78'S (0-1)[Mass-Bus tape controller for
TU78's*on,channel*]:- , &71 E +;-$ t can control
upPto.87sub-units =)tape+drives]: , &7@ . n +>.4 * -$ , &7,> I +>-$ XPXM.MT*, , )ox -$ *@ , ),^ ,~ , +;-$ : #-Controllers(0-1)[TX01's or,TX02's forPTU701Tape Drives)onchannelS*]: , &7, , +;-$ XP M.*FH,0@ , )* +;-$ XP M.*DP,0@ , ) +;-$ XP M.*RP,0@ , )@ +;-$ XP M.*RN,0@ , ), +;-$ "XP M.*FS,0@ , )- +;-$ %XPXM.*TB,0@ , )X +;-$ (XP M.*TC,0@ , )D +;-$ +XP M.*T2,0@ , )@ +;-$ .XP M.*D2,0@ , ), +;-$ 0XP M.*TX, , )- -$ 2*@ , )- -ld@ nB +A4P >: -l: +>-$ 8XP3M.MT*T,3@ , )-$ :XP M.TX*P, , ) +A-$ <*@ , ),
on your system]: , &7,> +;-$ XP M.CH*T,4@ , ) +;-$ XP M.*RH,1@ , ) +<-$ XP RH0CPU,*@ , ) +;-$ XP M.RHX,1@ , ) +;-$ XP M.*TR,0@ , ),^ -$ #XP M.RHA,*@ , ), p: +;-$ +Tape drives(1,1-4)[Total number of TU45's on your system]: , &7,> : -m +;-$ /XP M.CH*T,4@ , ) +;-$ 2XP M.*RH,0@ , ) +;-$ 5XP M.*TR,1@ , ) +;-$ 8XP M.TAPN,1@ , ) -$ ;XP M.MT0T,5@ , ) +;-$ >XP M.MT0C,*@ , ) +<-$ AXP M.MT0P,*@ , )-$ DXP M.MT0U,400000@ , ),^ -$ GXP M.MT0,*@ , ), p: +;-$ KDEFINE MACKN0 (X) , ), )K, )L-$ ODEFINE MACK60 (X) , ), )K, )L6 ^+ l " -$ X# RX211s(0,0-*)[Double density "floppy disk" controls]: , &7-$ [XP M.RX20,*@ , ) 4P l: +=." ("}-$ a # Units on RX*(1-2): , &7,> +=." ("}-$ eXP M.RX*, , )*x -$ g*@ , )*x -$ iXP M.RX*, , ) ,^ -$ k*@ , ) =p \7 ^+ $-$ oXP M.RX20,0@ , ) + $ +;-$ sXP M.*FH,0@ , ) +;-$ vXP M.*DP,0@ , ) +;-$ yXP M.*RP,0@ , ) +;-$ |XP M.*RN,0@ , ) +;-$ XP M.*RA,0@ , ) +;-$ XP M.*FS,0@ , ) +;-$ XP M.*TB,0@ , ) +;-$ XP M.*TC,0@ , ) +;-$ XP M.*T2,0@ , ) +;-$ XP M.*TX,0@ , ) +;-$ XP M.FHD,0@ , ) +;-$ XP M.FSD,0@ , ) +;-$ XP M.RPX,0@ , ) +;-$ XP M.RNX,0@ , ) +;-$ XP M.RAX,0@ , ) +;-$ XP M.DPC,0@ , ) +;-$ #XP M.MDF,0@ , ) ,~ +;-$ &XP M.CHN,*@ , ) -h-$ )XP M.RC10,*@ , ) -h-$ ,XP M.RH1S,*@ , ) -i-$ /XP M.RH1P,*@ , ) -i-$ 2XP M.RH2P,*@ , ) -k-$ 5XP M.RH20,*@ , ) -j-$ 8XP M.RHP4,*@ , ) -j-$ ;XP M.RP20,*@ , ) -k-$ >XP M.RP10,*@ , ) -l-$ AXP M.TX01,*@ , ) -m-$ DXP M.TM02,*@ , ) -m-$ GXP M.DX20,*@ , ) -n-$ JXP M.TM78,*@ , ) -l-$ MXP M.TM10,*@ , )7@ -b+ T-$ QXP M.R11D,1@ , )-$ SXP M.TRH1,1@ , )+ Y-$ VXP M.R11D,0@ , )-$ YXP M.TRH1,0@ , ) +>40 -$ kSpecify which drives (M-N) are 7 track drives.
[Type one number (M) or one range(M-N) or ALL on separate lines.
Type extra carriage return when through.]@ , )( +>/ ,> -$ oDEFINE MACKN* (X) , ),^ ." ("}-$ tFor controller MT*@ , '&=0 k-$ Specify which tape drives (M-N) are capable of 6250 BPI densities.
[Type one number (M) or one range (M-N) or ALL on separate lines.
TypeNanMextra carriage return whenthrough.]@ , )(l +>M +>/ ,> -$ b+ @@ .3@@ .4@@ .5,> ,> O@ +<: +<2" -`+ 9-$ # of DTEs on CPU*(1,1-4)[Interfaces for front-end PDP-11s]: , &7 @ -$ #XP M.DTEN,*@ , ) 2< + 4 +<$" . -$ , Type of front end on DTE* (RSX20F,ANF10,IBM,DECNET): , %S,> -$ 0XP M.*DTE, , ) x : -$ 2*@ , ),^ , /c9 #0< + -$ 8XP M.*DTE,0@ , ) 9 4 -o-$ ;XP M.TTDN,*@ , ) -o-$ >XP M.DLP,*@ , ) -p-$ AXP M.DCR,*@ , ) .3-$ DXP M.DN6S,*@ , ) .4-$ GXP M.DN8S,*@ , ) .5-$ JXP M.DDCN,*@ , ),^ ,^ + +<$" . ,> -$ Y # terminals on front end #*(0,0-128)[include
only timesharing (DH11) lines, not CTY or KLINIK]: , &77@ 7 ." .B -o-$ ]XP M.TTDN,*@ , ) x -$ c # line printers on front end #*(0,0-2): , &7.B -o-$ fXP M.LP0N,*@ , ) -$ iXP M.LP1N,0@ , ) -$ kXP M.LP2N,0@ , ) -$ nXP M.LP3N,0@ , ) 4B " S Z -$ z Front end printer * lower case(Y,N)[Does printer * have lower case capability]: , %G,> Z -$ }XP M.FL*L, , ) ,^ -$ *@ , ) *p p " 6 @+ x -$ # card readers on front end #*(0,0-1): , &7.B -p-$
XP M.CR0N,*@ , ) -$ XP M.CR2N,0@ , ) -$ XP M.CR3N,0@ , ) ,^ ,~ : .4,~ : .5,~ : .3: .1,~ 6@ -b+ [O@ +<: +<2$ -`+ 26 I7 J+ 6 M5D 2 " 6 I+ & +<-$ &How many DC10s on CPU*(1,0-2)[
The DC10 is a data line scanner]: , &77@ +< B -~ " 6 J+ 3 +<-$ 3How many DC68s on CPU*(1,0-2)[
The DC68 is a PDP-8 680 or 680I communications system]: , &77@ +< B -~ " 6 M+ ? +<-$ ?How many DC76s on CPU*(1,0-8)[
The DC76 is a PDP-11 communications system]: , &76@ +<+ B - -~-$ CXP M.DC10,*@ , ) -~-$ FXP M.DC68,*@ , ) --$ IXP M.DC76,*@ , ) " -$ LXP MD.DCS,*@ , )7@ -~+ R7@ -~+ R,> .b, [: x -~2Bx , [,^x 7@ -~+ V,> .b,
: x >@ -~,
,^x 7@ -+ k,> .b, : x >@ -+ X,^x + k-$ ]XP M.DC10,0@ , )-$ _XP M.DC68,0@ , )-$ bXP M.DC76,0@ , )-$ dXP MD.DCS,0@ , )-$ jTTY lines(0-32)[Total number of TTY lines]: , &7 B . .-$ mXP M.D70N,*@ , ) .-$ pXP M.D71N,*@ , ) .-$ sXP M.D72N,*@ , ) .-$ vXP M.D73N,*@ , ) .-$ yXP M.D74N,*@ , ) .-$ |XP M.D75N,*@ , ) .-$ XP M.D76N,*@ , ) .-$ XP M.D77N,*@ , )-$ XP M.D78N,0@ , )-$ XP M.D79N,0@ , )-$
XP M.D7AN,0@ , )-$
XP M.D7BN,0@ , ) --$ XP M.TTG0,*@ , ) . -$ XP M.TTG1,*@ , ) . -$ XP M.DSG0,*@ , ) .-$ XP M.DSG1,*@ , ) .-$ XP M.68L0,*@ , ) .-$ XP M.68L1,*@ , ) .-$ !XP M.DZNL,*@ , ) .-$ $XP M.DZNL,*@ , ) -. . (B . .. .. .. .. .. .. .. .. .. .. .-$ 0XP M.TLTL,* ;TOTAL LOCAL TTY LINES@@ , )7@ -b+ 6@ -b. -o< -$ :OPR octal line #(CTY,0-*)[OPR is privileged operator terminal]: , &8-$ =DEFINE OPRLIN , ), )K-$ ?@ OPRL *@ , ), )L-$ A@ , )-$ DDEFINE MACDSD , )-$ ZData set lines
[Class of terminal for LOGIN, LOGIN resets line
to computer echoing and no hardware tabs.
Type one octal line #(M) or one range(M-N) on separate
lines. Type extra carriage return when through.]@ , ' + C -$ ^@For DC10 *:@@ , )+ " -$ i# DC10B[ or 632] 8 line data groups(1-*)[
1 is TTY0-7, 2 is TTY0 - 17, ... 8 is TTY0 - 77]: , &7 B--$ o# DC10E Data set control groups(0-*): , &7 B. -$ sDEFINE MACCR* , ) 7@. + -$
Correspondence of DC10E lines to the DC10B lines(M-N,P)[
Type M,P for one pair and M-N,P for a range of pairs
where M is octal DC10E line, M-N is octal range of DC10E
lines, and P is octal DC10B line]@ , ',~ , )K+ )L -$ @FOR DC68 *:@@ , )+ " 2-$ # Octal lines on DC68, including its console TTY(1-*): , &: B.,~ -$ @For DC76 *:@@ , )+-$ 2Which DL10 port is the DC76 connected to(0,1-7)[Each PDP-11
is connected to a DL10 port. If there is only one -11 it
is always connected to port 0. If there are 2 -11's one is
connected to port 0 and the other to port 1]: , &7,> -$ ADecimal lines on DC76(1-129)[
Each DC76F is 16 lines and the console teletype is
one line. A DC76 with 2 DC76Fs has 33 lines]: , &7 x B.,^x ,~ " -$ L# Jobs(1-*)[Maximum number attached and detached, not
counting null job]: , &7-$ OXP M.JOB,*@ , ) " -$ RXP MD.2RR,*@ , ) " -$ UXP MD.SEG,*@ , ) " -$ XXP MD.DDT,*@ , ) " @ -$ `Maximum P of core for each job(0,0-*)[0 means all of core]: , &7-$ bXP M.CORE,*@ , ) " -$ k# K total system core(512-*)[ONCE-only reports if
less core at startup]: , &7-$ nXP M.NKC,*@ , )-$ tClock ticks per second(60,50)[Power line frequency]: , %S7@ m " -$ xXP M.TPS,*@ , )7@ -b+ }-$ |XP M.RTD,0@ , )+
" &-$ # Real-time devices(0,0-*)[Max. # which can be put
on PI channels simultaneously]: , &7-$ XP M.RTD,*@ , )5B -$ Allow jobs to be locked in core(Y,N): , %G-$ XP M.LOK,*@ , )4B " @ -$ # Pages min guaranteed among jobs not locked in core(0,0-*)[
minimum free core pool for unlocked jobs, 0 assumes all of core]: , &7-$ "XP M.MGC,*@ , ) " -$ '# High priority queues(0,0-*): , &7-$ *XP M.HPQ,*@ , )@ 6 T+ 2-$ 2Meter(Y,N)[Performance analysis metering(METER UUO)]: , %G-$ 4XP M.METR,*@ , )7B -b6B -b1 + B@ 6 S+ B-$ BKASER(Y,N)[Include support for simulation of KA10
long floating point instructions]: , %G-$ DXP M.FPS,*@ , )-$ QMSGSER(Y,N)[Support for device MPX. (more than one device
on an I/O channel). This feature is required for MCS-10]: , %G-$ TXP M.MSG,*@ , )-$ jPSISER(Y,N)[Advanced programmed software interrupt service -
Support for the PISYS. UUO. This provides an easy
and powerful interrupt method for program to trap asynchronous
events. Required by GALAXY-10]: , %G-$ lXP M.PSI,*@ , )-$ rIPCF(Y,N)[Inter process communication facility]: , %G-$ uXP M.IPCF,*@ , )-$ ENQ/DEQ(Y,N)[Sychronization primitives to allow
simultaneous file updateAby multiple$co-operating0processes]:a , %G-$ XPuM.EQDQ,*@ , )-$ XPMM.SYSC,0@ , )6@ -b+ :O@ +<: +<2" -`+ -`1p + .C10,*@ , ) " 6 B+ #-$ "CDP(Y,N)[Card punch]: , %G.B .6-$ %XP M.CDP,*@ , ) 4B /-$ ,CP10D(Y,N)[Special Systems unbuffered card punch]: , %G-$ /XP M.CP1D,*@ , ) " 6 N+ ;-$ :DIS(Y,N)[Display device(VP10,340,30,VB10C) as distinguished from
display terminals]: , %G4B B-$ AType(VP10,340,VB10C)[Answer VP10 for Type 30]: , %S: -p -p-$ DXP M.VP10,*@ , ) -p-$ GXP M.VP10,*@ , ) -q-$ JXP M.340,*@ , ) -q-$ MXP M.340,*@ , ) -q-$ PXP M.VBXC,*@ , ) -q-$ SXP M.VBXC,*@ , ) @ 7@ -p6@ -q " -$ XXP M.DIS,*@ , )-$ ZXP M.DIS,*@ , ) " 6 P+ a " -$ a# TD10s(1,0-*)[DECtape controls]: , &7-$ cXP M.TD10,*@ , ) 4P u: +=." ("}-$ i # Units on DT*(1-8): , &7,> +=." ("}-$ mXP M.DT*, , )*x -$ o*@ , )*x -$ rXP M.DT*, , ) ,^ -$ t*@ , ) =p e " -$ zLPTs(1,0-*)[Line printers on the I/O Buss]: , &7-$ }XP M.LPT,*@ , ) ,> 6@ " -$ XP MD.MOV,*@ , ),^ 4B +?-$
LPT* Lower case(Y,N)[Does LPT* have lower case capability]: , %G,> +?." ("}-$ XP M.LP*L, , )*x -$ *@ , )*x -$ XP M.LP*L, , ) ,^ -$ *@ , ) : +?=p " 6 V+ " -$ PLTS(0,0-*)[Plotters]: , &7.B .7-$ XP M.PLT,*@ , ) " 6 W+ &-$ %PTP(Y,N)[Paper tape punch]: , %G.B .7-$ (XP M.PTP,*@ , ) " 6 X+ .-$ -PTR(Y,N)[Paper tape reader]: , %G.B .8-$ 0XP M.PTR,*@ , ) -$ 3XP M.RX20,0@ , ) -$ 5XP M.RX20,0@ , ) " 6 E+ ? " -$ ># of DA28s(0,0-*)[Interprocessor channels for PDP8/11/15]: , &7-$ AXP M.XTC,*@ , )-$ CXP M.XTC,*@ , ) 4B P-$ M# of lines for TTY pool(8,0-512)[Lines reserved for use on DA28 channels]: , &7-$ OXP M.XTL,*@ , )-$ RXP M.XTL,*@ , ) " 6 F+ [ " -$ Z# DAS78s(0,0-*)[IBM 360, 370, and/or 2780 support]: , &7.B -r B .14B _,> .b, : x >@ .1+ ],^x -s-$ bXP M.0D78,*@ , ) -s-$ eXP M.1D78,*@ , ) -t-$ hXP M.2D78,*@ , ) -t-$ kXP M.3D78,*@ , ) -u-$ nXP M.4D78,*@ , ) -u-$ qXP M.5D78,*@ , ) -v-$ tXP M.6D78,*@ , ) -v-$ wXP M.7D78,*@ , ) -r-$ zXP M.D78L,*@ , ) -r-$ }XP M.XXI,*@ , ) -r-$ XP M.XXO,*@ , ) + -$ @For DAS78 *:@@ , )+-$ Which DL10 port is the DAS78 connected to (0,0-7)]
Each DAS78 PDP11 is connected to a DL10 port]: , &7,> -$ Decimal lines on the DAS78 (1-16)[
Each DAS78 can support up to 16 IBM 360s, 370s, and/or 2780s]: , &7.B -r x B-s,^x ,~ /e@@ -w*$ -}@ 7 H6@ +<+ & " -$ &# DN60s(0,0-*)[IBM BSC interfaces]: , &7 B -w.B .16@ +<+ / -w-$ +XP M.DN6D,*@ , )7@ -w+ /,> .b, g: x >@ -w+ -,^x -x-$ 2XP M.0D60,*@ , ) -x-$ 5XP M.1D60,*@ , ) -y-$ 8XP M.2D60,*@ , ) -y-$ ;XP M.3D60,*@ , ) -z-$ >XP M.4D60,*@ , ) -z-$ AXP M.5D60,*@ , ) -{-$ DXP M.6D60,*@ , ) -{-$ GXP M.7D60,*@ , ) -w-$ JXP M.D60L,*@ , ) 6@ +<+ -x-$ NXP M.0D60,*@ , ) -x-$ QXP M.1D60,*@ , ) -y-$ TXP M.2D60,*@ , ) -y-$ WXP M.3D60,*@ , ) -z-$ ZXP M.4D60,*@ , ) -z-$ ]XP M.5D60,*@ , ) -{-$ `XP M.6D60,*@ , ) -{-$ cXP M.7D60,*@ , ) -w-$ fXP M.D60L,*@ , )+ -$ i@For DN60 *:@@ , )+-$ uWhich port is the DN60 connected to (0,0-7)[
DL10 number 1 has ports 0-3, DL10 number 2 has ports 4-7]: , &:,> -$ Decimal lines on the DN60 (1-12)[
Each DN60 can support up to 12 IBM BSC interfaces]: , &7.B -w x B-x,^x ,~ -$ XP M.DN6K,0@ , )-$ XP M.DN6R,0@ , ) .1-$
XP M.DN60,*@ , )+ .6-$ XP M.CDR,*@ , ) .6-$ XP M.CDP,*@ , ) +=-$ XP M.TD10,*@ , ) +?-$ XP M.LPT,*@ , ) .7-$ XP M.PLT,*@ , ) .7-$ XP M.PTP,*@ , ) .8-$ XP M.PTR,*@ , ) -r-$ #XP M.DAS78,*@ , ) -r-$ &XP M.XXI,*@ , ) -r-$ )XP M.XXO,*@ , )-$ +XP M.RX20,0@ , ) " -$ 6# PTYs(20,1-*)[Pseudo-terminals - each operator
service program and Batch stream needs one]: , &7-$ 9XP M.PTY,*@ , )+ @@ +< " -$ E# PTYs(20,1-*)[Pseudo-terminals - each operator
service program and Batch stream needs one]: , &7-$ GXP M.PTY,*@ , )-$ KLPT(0,0-1)[Line printer]: , &7-$ NXP M.LPT,*@ , )-$ PXP M.LPT,*@ , ) 4B f +;-$ TXP M.CH*T,5@ , ) +;-$ WXP M.LP0C,*@ , ) +;-$ ZXP M.*RH,0@ , ) +;-$ ]XP M.*TR,0@ , ), p: +;-$ cLower case(Y,N)[Does LPT have lower case]: , %G-$ fXP M.LP0L,*@ , ) " 6 @+ l -$ lCDR(0,0-1)[Card reader]: , &7-$ nXP M.CDR,*@ , )-$ qXP M.CDR,*@ , ) 4B +;-$ tXP M.CH*T,6@ , ) +;-$ wXP M.CD0C,*@ , ) +;-$ zXP M.*RH,0@ , ) +;-$ }XP M.*TR,0@ , ), p: +; +;-$ XP M.CHN,*@ , )@ 6 W+ -$ PTP(Y,N)[Paper tape punch]: , %G.B .7-$
XP M.PTP,*@ , ) @ 6 X+ -$ PTR(Y,N)[Paper tape reader]: , %G.B .8-$ XP M.PTR,*@ , ) " -$ # KMC/DUP Lines(0,0-*)[Number of DUP-11 synchronous
line units attached to a KMC-11 controller.]: , &7-$ XP M.KDUP,*@ , )@p .24B 8 20 + 8 7 H+ +-$ *Type of line for KDP* (ANF10,DECNET,USER): , %S+ 1-$ 0Type of line for KDP* (ANF10,DECNET,USER,IBM): , %S1B : .2: -$ 5XP M.*KDP, , ) -$ 7*@ , )9 " Z .3@@ .2@ 6 G+ C " -$ C# DMR11 Lines(0,0-*)[Number of DMR11 synchronous line
controllers.]: , &7-$ EXP M.DMRN,*@ , ). 4Z - Z .4@ 20 + 6 H+ Q-$ P DMR* line type(ANF10,DECNET,USER,IBM): , %S+ V-$ U DMR* line type(ANF10,DECNET,USER): , %S1B : .2: -$ ZXP M.*DMR, , ) -$ \*@ , ) -$ e DMR* switched line(Y,N)[
Does-DMR* controlla switched,(dial-up) line]: , %G* -$ hXP DMR*SW, , )* -$ j*@ , )4B
Does-DMR* control aehalfaduplex)line]: , %G* -$ vXP DMR*HD, , )* -$ x*@ , )4B
Exactly one end of this link should be a secondary station. Secondary
*status controls link startupHonly.]: , %G* -$ XP DMR*LS, , )* -$ ications software (Y,N)[
Allows using a KDP or DMR to talk to a DN22 IBM communications front-end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bXP M.XTC,0@ , )-$ dXP M.XTL,0@ , )-$ gXP M.DAS78,0@ , )-$ iXP M.0D78,0@ , ) -$ lXP M.1D78,0@ , ) -$ nXP M.2D78,0@ , ) -$ qXP M.3D78,0@ , ) -$ sXP M.4D78,0@ , ) -$ vXP M.5D78,0@ , ) -$ xXP M.6D78,0@ , ) -$ {XP M.7D78,0@ , ) -$ }XP M.DN6D,0@ , )-$ XP M.0D60,0@ , )-$ XP M.1D60,0@ , )-$ XP M.2D60,0@ , )-$ XP M.3D60,0@ , )-$
XP M.4D60,0@ , )-$
XP M.5D60,0@ , )-$ XP M.6D60,0@ , )-$ XP M.7D60,0@ , )-$ XP M.8D60,0@ , )-$ XP M.9D60,0@ , )-$ XP M.AD60,0@ , )-$ XP M.BD60,0@ , ) +=-$ XP M.RX20,*@ , )+ -$ !@RADIX 10@ , )-$ .Decimal "symbol,value"[
For any symbols to be defined.
Type one per line, extra carriage return when through]@ , )(l , (>+ 4R <, 'p0R + 9 0R + 5, Y+ 9+ ., 'h5R 9-$ 8XP *@ , )E+ .-$ ;? Not symbol,value@ , ),9 -$ >RADIX 8@ , ) * -$ K@Octal "symbol,value"[
For any symbol to be defined.
Type one per line, extra carriage return when through]@ , )(l , (>+ ?4R a, 'p0R + V 0R + R, Y+ V+ K, 'i5R V-$ UXP *@ , )E+ K-$ X? Not symbol,value@ , ),9 ?@ 4R )A1R 9 Z0R + Z=p Z, (5R )A!" -$ `XP *@ , )E+ )@ * -$ n@SIXBIT "symbol,value"[
For any sixbit symbol to be defined.
Type one per line, extra carriage return when through]@ , )(, (>+ b4R ~,> , 'p0R + z, 'p5R z,^ , 'p -$ vXP * , ), 'p -$ y,<SIXBIT/*/>@ , )+ o,^ -$ }? Not symbol,value@ , ),9 b * -$ @DEFINE SPCINT , ), )K-$ Type "device-mnemonic,PI-channel" for special devices[
With neither channel AC save routine nor device data block,
the "device-mnemonic" must be 3 characters or less.
Type extra carriage return when through.]@ , )(, (9 4H #7@ + -$ ? Not device-mnemonic,PI-channel@ , ),9 -$ "SPASGINT *@ , )E+ , )L * -$ &@DEFINE SPCDDB , ), )K-$ ;Type "device-mnemonic,PI-channel,no.-of-devices"[
For special devices with device data blocks.
the "device-mnemonic" must be 3 characters or less.
Type extra carriage return when through.]@ , )(, (9 '4H H0R + B, 'h5R B-$ ASPASGDDB *@ , )E+ ;-$ G? Not device-mnemonic,PI-channel, no.-of-devices@ , ),9 ', )L * -$ K@DEFINE SPCSAV , ), )K-$ cType "device-mnemonic,PI-channel,highest-ac-to-save"[
For special devices with channel save routines to save acs up to
the "highest-ac-to-save". "Device" must be 3 char or less.
Type extra carriage return when through.]@ , )(, (9 L4H y0R + r, 'i5R r0b 7 + o " -$ n? Highest-ac-to-save must be * or less@ , )+9 L-$ qSPASGSAV *@ , )E+ d-$ x? Not device-mnemonic,PI-channel,highest-ac-to-save@ , ),9 L, )L-$ {@DEFINE SPCEDN , ), )K-$ Type "ersatz-device,P,Pn,search-list-type"[
For customer defined ersatz devices.
The "esratz-device" must be exactly 3 characters long.
"P,Pn" is the Project/Programmer number associated.
"search-list-type" is one of ALL,SYS,JOB.
Type extra carriage return when through.]@ , )(, (>9 |4R ., 'p0R + (aHp ah + (, 'i4R (0R + (, 'i4R (0R + (, 'p5R (2H /e3H /f+ %2H /f+ (-$ 'UERSTZ *@ , )E+ -$ -?Not ersatz-device,P,Pn,search-list-type@ , ),9 |, )L-$ 0@DEFINE SPCCMD , ), )K-$ uType "command-name,dispatch,flags,unique-bits,PRVTAB-name"[
For customer defined commands.
The "command-name" is the name of the monitor command to be added.
"dispatch" is one of:
omitted to run the program with the same name as the command
the SIXBIT name of the program to run if different
#address to use the already existing monitor location "address"
as the dispatch routine for this command, e.g., #RUNQUE
"flags" are the flags used in the command table macros, e.g., RUNFLG
"unique-bits" are the command table unique bits, e.g., UNIQ.1
"PRVTAB-name is the name of the program to be added to PRVTAB, if any
Type extra carriage return when through.]@ , )(@@ +E /g*2 +Gl , (>9 14R #, 'p4H 0R + H +E, 'p0R + 5H , 'p4H 0R + H +F+ 0R + H +F J +G 4R 0R + 4R 0R + J +G, 'p5R ,> +E-$ UCMDNM * , )-$
, , )7B +F+ -$ * , )-$ , , )7B +F+ -$ * , )-$ , , ) +G 0R 1R + , )O2D +G+ ,^ 4B -$ * , )-$ @ , )+ v-$ "?Incorrect syntax for user defined command@ , ),9 1, )L-$ &@DEFINE SPCTRM , ), )K-$ Type "terminal-type/Alias,WIDTH,LENGTH,FF,TAB,LC,ALT,DISPLAY,CRLF,XON,8BIT,FILL,erase-to-EOL,backspace-space-backspace"[
For customer defined terminal types.
Terminal-type is the SIXBIT name of the terminal.
/Alias is optional. Alias is the SIXBIT name sent to other systems on
set host.
WIDTH is the width of the terminal
LENGTH is the length/pagesize of the terminal
FF/NOFF is whether or not the terminal has hardware form feeds
TAB/NOTAB is wheither or not the terminal has hardware tabs
LC/NOLC is wheither or not the terminal is capabile of lower case
ALT/NOALT is wheither or not the terminal generates old altmodes
DIS/NODIS is wheither or not the terminal is a display terminal
CRLF/NOCRLF is wheither or not the terminal needs a CRLF at right margin
XON/NOXON is wheither or not ^S/^Q should pause the terminal
8BIT/NO8BIT is whether the terminal handles the 8-bit ASCII character set
FILL is the number of fill characters required for the terminal
Erase-to-EOL is address of sequences to cursor right and erase to EOL
Backspace-space-backspace is address of sequences to backspace, space, backspace
Type extra carriage return when through.]@ , )(, (>9 $4R ?, 'p4H 50R + # 2 r , 'p4H 50R + 5, 'h0R + 5, 'h0R + 5!0|, 'p0R + 54H 53H@ ;+ .h(k`hhk`+ 5(H 2H@ ;+ 5*p (, 'h0R + 5, 'p0R + 5, 'p5R 5-$ 4TERMCR *@ , )E+ -$ :?Not a valid terminal attribute list format@ , ),9 'M i Y
C3 I' GJd` q>p 1
N@ , )L * ,~ -$ ISUBTTL NETCNF - NETWORK CONFIGURATION DEFINITION FILE OUTPUT BY MONGEN DIALOG@@@ , )-$ MDEFINE XP(A,B),<A==:B>@@@ , ) " -$ PXP M.NET,*@ , )-$ SXP M.RSS,0@ , )-$ UXP M.DS10,0@ , )-$ XXP M.DP01,0@ , )6 K+ h-$ gNetwork software(Y,N)[
Software to support remote computers: DECsystem-10's,
PDP-11's, PDP-8's (requires FTNET to be -1)]: , %G+ u-$ tNetwork software(Y,N)[
Software to support remote computers: DECsystem-10's and
PDP-11's (requires FTNET to be -1)]: , %G-$ wXP M.NET,*@ , )4B #v@@ ., : " 7 C " 6 O7 L1 + !-$ !Cpu's(1,1-*)[Total number of cpu's in the system]: , &7 B -`O@ +<: +<2" -`+ !26@ +<+ !6 L7 O1 + !-$ !How many DC75NP's or DN87's on CPU*(1,0-8)[Network
front-ends connected to DL10's.]: , &7 B ., .,-$ !XP M.DC75,*@ , )7@ .,+ !@ , $8.: >@ .,+ ! .--$ ! XP M.0D85,*@ , ) .--$ ! XP M.1D85,*@ , ) ..-$ !"XP M.2D85,*@ , ) ..-$ !%XP M.3D85,*@ , ) ./-$ !(XP M.4D85,*@ , ) ./-$ !+XP M.5D85,*@ , ) .0-$ !.XP M.6D85,*@ , ) .0-$ !1XP M.7D85,*@ , ) + !-$ !<ANF node number of central site(1,1-77)[
Unique octal number identifying system to ANF network.]: , &:-$ !?XP OURNNM,*@ , )-$ !EName of central site[Six characters or less.]: , '0b 7 + !K-$ !J%More than 6 characters.@ , ),+ !?-$ !O@DEFINE SYSNDE
<SIXBIT &*&>@ , )E " -$ !\# of remote TTY's(1,1-*)[
Maximum number of teletypes on ANF network nodes to be
handled at any given time.]: , &7-$ !_XP M.RMCR,*@ , )-$ !jANF Network virtual terminals(Y,N)[
Code to allow local terminals to "SET HOST" to other systems.]: , %G-$ !mXP M.RVTM,*@ , )-$ !wRemote card readers(Y,N)[
Code to allow access to card readers on ANF remote stations.]: , %G-$ !zXP M.RCDR,*@ , )-$ "Remote line printers(Y,N)[
Code to allow access to line printers on ANF remote stations.]: , %G-$ "XP M.RLPT,*@ , )6 Z+ "-$ "Remote paper tape punches(Y,N)[
Code to allow access to paper tape punches on ANF remote stations.]: , %G-$ "XP M.RPTP,*@ , )6 [+ "%-$ ""Remote paper tape readers(Y,N)[
Code to allow access to paper tape readers on ANF remote stations.]: , %G-$ "%XP M.RPTR,*@ , )6 Y+ "2-$ "/Remote plotters(Y,N)[
Code to allow access to plotters on ANF remote stations.]: , %G-$ "2XP M.RPLT,*@ , )-$ ">Remote DN8x DDCMP devices(Y,N)[
Code to allow access to DN8x LBLK-to-DDCMP devices on ANF remote stations.]: , %G-$ "AXP M.RDDP,*@ , )-$ "LRemote data entry terminals(Y,N)[
Code to allow access to remote data entry terminals (RDX devices).]: , %G-$ "OXP M.RDX,*@ , )-$ "YRemote task-to-task through ANF(Y,N)[
Code to allow access to remote jobs (TSKSER).]: , %G-$ "[XP M.RJOB,*@ , ) " -$ "e# of ANF connects(*,1-512)[
Maximum number of simultaneous connections.]: , &7-$ "gXP M.CONN,*@ , )-$ "rDECnet software(Y,N)[
Load monitor modules needed to communicate with other DECnet nodes]: , %G-$ "tXP M.DECN,*@ , )4B #D-$ #DECnet area number of central site(1,1-63)[
Decimal area number for multi-area DECnet network configurations.]: , &7-$ #XP %RTHOM,*@ , )-$ #DECnet node number of central site(1,1-1023)[
Unique decimal number identifying system to DECnet network.]: , &7-$ #XP %RTADR,*@ , )-$ #'DECnet router type(ROUTING,NONROUTING)[
ROUTING nodes can have multiple circuits and perform DECnet routing.
NONROUTING nodes have only an ethernet circuit and perform no DECnet routing.]: , %S." -$ #*XP %RTRTY,*@ , )6 \+ #D-$ #9Transmit password(DECNET20)[
Password used when initializing a point-point --KDP, DTE, or DMR-- link.
64 characters or less]: , '0b 7 + #?-$ #>? More than 64 characters@ , ),+ #+!" -$ #CDEFINE %RTXPW<RTRPW <*>>@ , )E-$ #MEthernet software(Y,N)[
Load monitor modules needed to communicate via Ethernet]: , %G-$ #OXP M.ENET,*@ , )5B #V-$ #RXP M.LATN,0@ , )-$ #UXP M.LAMC,0@ , )+ $7-$ #aInclude LATSER(Y,N)[
Load monitor module to communicate with
terminal concentrators via Ethernet]: , %G-$ #cXP M.LATN,*@ , ) " 2-$ #r# of simultaneous LAT circuits(20,1-*)[
Maximum number of simultaneous LAT circuits.
One is required for each active LAT server.]: , &7-$ #uXP M.LAMC,*@ , )+ $7-$ #xXP M.NODE,0@ , )-$ #zXP M.DC75,0@ , )-$ #}XP M.0D85,0@ , ) -$ #XP M.1D85,0@ , ) -$ $XP M.2D85,0@ , ) -$ $XP M.3D85,0@ , ) -$ $XP M.4D85,0@ , ) -$ $ XP M.5D85,0@ , ) -$ $
XP M.6D85,0@ , ) -$ $XP M.7D85,0@ , ) -$ $XP OURNNM,0@ , )-$ $@DEFINE SYSNDE<>@ , )E-$ $XP M.CONN,0@ , )-$ $XP M.RMCR,0@ , )-$ $XP M.RVTM,0@ , )-$ $ XP M.RCDR,0@ , )-$ $ XP M.RLPT,0@ , )-$ $#XP M.RPTR,0@ , )-$ $%XP M.RPTP,0@ , )-$ $(XP M.RPLT,0@ , )-$ $*XP M.RDDP,0@ , )-$ $-XP M.RJOB,0@ , )-$ $/XP M.RDX,0@ , )-$ $2XP M.DECN,0@ , )-$ $4XP M.ENET,0@ , )-$ $7XP M.LATN,0@ , ),~ -$ $;For front end number *:@ , )+5\ $D-$ $CTo which DL10 port is the DC75 or DN87 connected (0,0-7)[]: , &7+ $J-$ $JTo which DTE20 is the DN87S connected (1,1-3)[]: , &7 " B.-,~ 0B m d -$ $]Switch(switch to list or explain)[
Type name of switch to be listed or explained or ALL or /HELP.
Type extra carriage return when through.]@@ , ),, (>+ $N4R $g, 'p7@ + $d -$ $c? Unknown switch *@ , ),+ $N3H /e+ $h, $m+ $N+ $] * ,~ S -W,> 7I -V+ $ld(`l(m , $m+ ,^ *d $h,~ [ d 0Bm 7 + $t -$ $s? Unknown switch *@ , ),,~ d(`6@ + $y-$ $x? Unknown switch@ , ),,~ , % l"m 7 + $-$ $~? Unknown switch *@ , ),,~ ,> 6! -V+ %-$ %*,-1 , ),+ %-$ %*,0 , ),,^ : x `` + %-$ %@ , ),,~ , ( + % , (-$ %
@ , ),,~ S -WU" A -V2B *d %
,~ 6 D+ %--$ %,DECsystem10(1070,1080,1090,1091,2020)[
1070 is a system with KI10 cpu's
1080 is a system with KL10 cpu's
1090 is a system with KL10 cpu's and internal channels
1091 is a system with a KL10 cpu, internal memory, and devices
on the front end
2020 is a system with a KS10 cpu]: , %S+ %;-$ %9DECsystem10(KL,KS)[
KL is a system with KL10 cpu's and internal channels
KS is a system with a KS10 cpu]: , %S1B " 1B " 0b 7 + %B " _-$ %A? Not available in * monitor@ , ),+ % B +6: -X0B + %E: -b,~ 7@ ; -a: -b,~ , %c! +(0D + %J! +(7@ +)0D` 7 + %Q-$ %PASKYN called without (Y,N) in above message , )4B %Rg " ,~ , %c! +(0D 1D` + %W! +(0D 1D` 7 + %b-$ %bASKLST called with (Y,N) in above question
- Edit MONGEN to call ASKYN instead of ASKLST@ , ),~ , , '9 x Z, ),Z, %i, (>+ %d, &9 %d+ '=Q$A`,> ,> 6@ + %r-$ %r? No (ANS0,ASN1,...) in above question - Edit MONGEN , )0R + %j "
, 'p0R + %w5H &
x H+(0b 7 + %-$ %~Too many prompts in above question - Edit MONGEN@ , )1R 9 %t@@+(,^ ,^ 1R ,~ -$ & Special character inside () above
Edit MONGEN and remove it. , )-$ &Error in above question - Edit MONGEN@ , ), 'p+ &, 'p7@ + &-$ &? Type one answer followed by carriage return@ , ),,~ d @b +64H &1 $ ($ G$ cH + &(D} +(3F + &1f 2F + &( B +6l` 7 + &(-$ &'? Type enough to uniquely distinguish answer@ , ),,~ 6F+(9 & a` 7 + &1-$ &0? Answer with one of the choices inside parens@ , ),,~ +67@+(7 + &7-$ &6? No default allowed@ , ),,~ + )@ , + &: , l @ + &; , d @ , '9 x Z, ),O@ +8@@ +7!$p D +7Z
Q*A` 4R &P0R + &@, 'j0R + &E5B &Prx , (+ &B1R + &V1R 1h 0R !+ &M5B &P, 'py"<@2H /ga` @ + &M2H /h+ &P)"= 7 +8'B +81R + &\1R + &B-$ &VAbove question must have(...,min-max)7- Edit MONGEN , )cB +7, 'j1R + &Z0R + &[7x !"p , (0R + &P'B +7, (>+ &;4R &u, 'j4R &~a` @ 7 + &g-$ &f?iType singlenumber followedby,carriageMreturn@ , ),9 &;1R 1h 0R !+ &k5B &k, 'p3H /h+ &t7 + &t-$ &s?`Typeoctal1line+number or+CTYMfollowed by carriage7return@ , )+9 &;!"= + '! +82B /h3B /i+ '!` 6S + &~-$ &}?No default,allowed, typeOa^number@ , ),9 &;3B +8+ '2" +72b +77 + '' +7-$ '?Must~be in,range~* , ),) +7-$ '-*@ , ),9 &;+ '=, '9 x Z, ),, (>+ '+ '= , , )K, '9'x Z, ),, (>+ ' a` 2 r ,~ , + 'j , " , (4R )A02 020 + ($ ."Oh + 'k,> /j+ 'p,> /k, '~ ( /k4R '}a` + 'v1R + 'z0R 1R + 'z02 0r + 'x+ 'z02 0h 02 0r -+ '}/2 `dp R +@x + 'r, (,^x ,~ +@0R 1R + '~,~ , (>,~ ( 4R )@, 'p4H (0R ,~ `H7 + (
-$ ( ?DDevice-mnemonic must be 3 char or less@ , ),,~ , 'i -`$$ -`.$ 0b 7 + ( -$ (? PI-channel must be * or less@ , )+,~ + )@ 0R 1R + (,~ ,> /j!" + )-l ,> /j!" + ) e l d , (.42 (&5R ( /kadp + (( 4B ((, (.42 (&4R ( 02 0/2 0BOp+ ( + ( `` l` ,~ d @+ ( a` + )@, (.4r ( 0R + ()+ )@, (.52 )A@ ,~ `` @+ (6$ gg +O+ (= *
+ (=l `,> (`2 ,S R (2 )A +O4R (61R ?+ (602 > 2
/mR 4R (G, (|1" (9 (@d -$ (F? Line too long@ , ),9 )&d
/m, (1R + (K
/md + )@,> $ /n, %i, &9 (T4R (S0R 9 (T $ /o, %i, &9 (T4B (S/" d + (zd 9 ({e ,> " _-$ (wMONGEN for * monitors
/HELP(PROMPT,SHORT,LONG)[
All # are decimal unless stated otherwise
Unique abbreviation allowed everywhere to all questions
/HELP reasks a question in next longer mode
/HELP:xxx sets mode permanently. Modes are:
SHORT is short
PROMPT has choices in ()
LONG has choices in () and explanation in []]: , %S1B O@ 1B " B * ,^ ,~ , )+ )ja` 0R 1R + ) , )z,~ , )+ )j+ ) 6@ ++ /q?` +K7 + ) @ + )
0 + )+ ) +K4R )0R ?1R + )02 0r 7 + )0R
& /r
& -$ )@? Internal MONGEN error - , ),^ , ) ` l , + )m , Q$A`,> /u+@x 4R )&1R , )6, )O+ ) , Q$A`,> x 4R )&,> 1R + )$ +<1R , )6, )O,^ + ) ,^x d ,~ 7
/v , ,> , '?, ),^ + ), , + ), , Q$A`,> /u+@x 4R )h1R -l `` 4n )51R l `` 4. )41R , )6, )1R d 1R .d + )-,> abp + )< /j 4R )@.2 +A`hp + )8+ )@ 1b a` + )? 2 , , )A,^ : x ,~ &$0 QFx 4D )C, )A[x .2 + Q$A` 4R )A1R + )H, )O+ )E,> $ +-, ),^ + )E 2 , )O+ )M 2 , )O 2 , )O 2 a` ,~ 1R + )M6@ * l` + )T,> 2 , )d,^ d` a` + )Z,> 2 , )[ 2 , )[ 2 , )[,^ 1R l 6@ * , )d?` +N, /vR +N,~ 2 , ) 2 1R + )^6@ * e` + )d,> 2 , )d,^ 6@ ++ )g?` +M
" ,~ 7@ +7@ *,~ ,> `` , /xL2 , )z 2 , )z,^ ,~ 7 *,~ ,> ,> $ /z, )t,^ ,^ ,~ Q$A` 4R )A, )~+ )t 4F )A@ )D 2 , )~+ )w6 *+ )~Q2 `` h2 !` , )~[` 7@ *,~ ?` * CD20(Y,N)[CD20 Unibus card-readers]: CR10(Y,N)[I/O bus card reader]: CP10(Y,N)[I/O bus card punch]: CPUS(Y,N)[More than supported number of CPUs]: CPUTYP(Y,N)[Unsupported CPU types]: DA28(Y,N)[DA28 Interprocessor link]: DAS78(Y,N)[DAS78 IBM interface]: DMR(Y,N)[DMR-11 synchronous line controller]: DN60(Y,N)[IBM 2780/3780/HASP communications]: DC10(Y,N)[DC10 data line scanner]: DC68(Y,N)[680I PDP-8 based terminal concentrator]: DC72(Y,N)[DC72 PDP-8 remote stations]: DC75(Y,N)[DC75-NP network]: DC76(Y,N)[DC76 Asynchronous Front End]: DIS(Y,N)[VP series displays]: DN87(Y,N)[DN87 DL10-based ANF front end]: DTA(Y,N)[DECtapes]: DX10(Y,N)[DX10 Tape controller]: EXTCHN(Y,N)[External channels]: KASER(Y,N)[KA Floating-point simulator]: METER(Y,N)[Software performance meter]: MICGEN(Y,N)[Make a .MIC/.CTL file of the session]: PLT(Y,N)[Plotters]: PTP(Y,N)[Paper-tape punch]: PTR(Y,N)[Paper-tape reader]: RPLT(Y,N)[ANF-10 remote plotters]: RPTP(Y,N)[ANF-10 remote paper tape punches]: RPTR(Y,N)[ANF-10 remote paper tape readers]: RTRXPW(Y,N)[Control ROUTER's transmit password]: RC10(Y,N)[RC10 controller for RD10 disk]: RX20(Y,N)[RX20 Floppy disk controller for 2020]: TM10(Y,N)[TM10 I/0 bus magtape controller]: ~ +[>ty7[& .RUN
;Write MONGEN.MIC(Y,N)
*Y
2x+-$ /H% File DSK:MONGEN.MIC already exists@ , ),,~ 7@ +,~ @@ +-$ /O@% DSK:MONGEN.MIC will not be written@ , ),7b *,~ @@ *1B + /C-$ /T% ENTER error * , )+,~ m ' I
[DSK:MUNGEN.EXE written]
BD@ @GD@ @-$ /] , ),+ \MP 0 (,LIST,EXPLAIN) Q
I9 +/l + L ^p-wC2` gg U> 8X+Fd id GH GSH Y0 H , (, H D ,~ + (<H +-(HELP) (,SHORT,PROMPT,LONG)
( + )
? Internal MONGEN error - b ,~ + 2 /, )z 2 -+ )z