Trailing-Edge
-
PDP-10 Archives
-
klad_sources
-
klad.sources/klad10.txt
There are 2 other files named klad10.txt in the archive. Click here to see a list.
;DFQDJ
IDENTIFICATION
--------------
PRODUCT CODE: AH-F601C-DD
DIAGNOSTIC CODE: DFQDJ - (KLAD10)
PRODUCT NAME: DFQDJC0 KLAD PACK CREATOR
VERSION: 0.3
DATE RELEASED: JUNE 1979
MAINTAINED BY: DIAGNOSTIC ENGINEERING
AUTHOR: JOHN R. KIRCHOFF
COPYRIGHT (C) 1976, 1979
DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE FOR USE ONLY ON A
SINGLE COMPUTER SYSTEM AND MAY BE COPIED ONLY WITH THE INCLUSION
OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE, OR ANY OTHER
COPIES THEREOF, MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE
TO ANY OTHER PERSON EXCEPT FOR USE ON SUCH SYSTEM AND TO ONE WHO
AGREES TO THESE LICENSE TERMS. TITLE TO AND OWNERSHIP OF THE
SOFTWARE SHALL AT ALL TIMES REMAIN IN DIGITAL EQUIPMENT
CORPORATION.
THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT
NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
EQUIPMENT CORPORATION.
DIGITAL EQUIPMENT CORPORATION ASSUMES NO RESPONSIBILITY FOR THE
USE OR RELIABILITY OF ITS SOFTWARE IN EQUIPMENT WHICH IS NOT
SUPPLIED BY DIGITAL EQUIPMENT CORPORATION.
MAINDEC-10-KLAD10.TXT
PAGE 1
TABLE OF CONTENTS
-----------------
1.0 ABSTRACT
2.0 REQUIREMENTS
3.0 PROGRAM PROCEDURES
4.0 PROGRAM LISTINGS
MAINDEC-10-KLAD10.TXT
PAGE 2
1.0 ABSTRACT
--------
DEFINITION
==========
THE "KLAD" DISK PACK IS THE MAIN DIAGNOSTIC AND SYSTEM
CHECKOUT AND ACCEPTANCE MEDIUM FOR THE DECSYSTEM10 KL10.
THE "KLAD" PACK CONTAINS THE FOLLOWING SOFTWARE:
A. COMPLETE SET OF DIAGNOSTICS FOR DIAGNOSING ANY DECSYSTEM10
KL10 CONFIGURATION.
B. COMPLETE SYSTEM SOFTWARE REQUIRED FOR LOADING, RUNNING AND
CHECKOUT OF THE TOPS-10 SYSTEM.
USE OF KLAD
===========
A. FAST INSTALLATION GOALS
B. REDUCED DIAGNOSIS TIME (LESS MTTR)
C. REMOTE DIAGNOSIS (KLINIK = SHARED MANPOWER,RESOURCE POOLING)
D. ENSURING REPAIRED SYSTEM IS INTACT
E. MAINTAIN MACHINE REV COMPATIBILITY
MAINDEC-10-KLAD10.TXT
PAGE 3
2.0 REQUIREMENTS
THE CREATION OF A KLAD PACK REQUIRES:
A. A FORMATTED DISK PACK
B. DIAGNOSTIC DISTRIBUTION MAGTAPE
C. APPROPRIATE SYSTEM SOFTWARE
D. TIMESHARING DECSYSTEM10 WITH PRIVATE RP04/RP06 DISK DRIVE
E. STANDALONE KL10 TO VERIFY THE KLAD PACK
3.0 PROGRAM PROCEDURES
DESCRIBED IN THE "KLAD10.HLP" FILE FOR NOW. WILL BE IMPROVED
AS TIME PERMITS.
4.0 PROGRAM LISTINGS