PDP-10 Archive: uetp/lib/verify.cmd from k20v7d

Trailing-Edge - PDP-10 Archives - k20v7d - uetp/lib/verify.cmd

There are 35 other files named verify.cmd in the archive. Click here to see a list.

!This file contains simple acceptance tests for system software.
!
!A more comprehensive description of how to run UETP is given in 
!the UETP manual.
!
!Only the first two tape drive tests are run. If additional tape test are 
!desired then they should be ENABLED and a BEGIN command issued.
!
!No communications tests are ENABLED because the general audience for
!this procedure will not have the communications gear.  If you wish to
!run the DN64 or DN20 tests consult the installation guide.
!
!Blank tapes need to mounted on MTA0: and MTA1: for this procedure to
!work.
!
!
!ENABLE THE TESTS TO BE RUN FOR 1/4 HOUR 
!
ENABLE VERIFY/CYCLE:1			! Verify that the correct software
BEGIN					! is installed

DEFAULT/CYCLE:00:15
ENABLE RANCBL
ENABLE RANFOR
ENABLE MTA0
STATUS