Trailing-Edge
-
PDP-10 Archives
-
k20v7b
-
mfg/update.mfg
There is 1 other file named update.mfg in the archive. Click here to see a list.
This file lists changes in the KLAD20-MFG tape from KLAD release
KLAD20-Z-6.1-A (KLAD20-MFG-A Tape) to KLAD20-AB-6.1-A (KLAD20-MFG-B Tape).
C - Files that have been modified.
A - Files that have been added.
D - Files that have been deleted.
-----
<MFG> Directory:
D - CI20.CTL ;Obsolete - Replaced by CI20.VER
D - CONFIG.B19 ;Not needed, another copy in <MFG.SRC>
D - CONFIG.B20 ;Not needed, another copy in <MFG.SRC>
C - CONFIG.EXE ;Updated to read <UTILITIES>KLAD20.REV for
;KLAD20 designation to plug into MONNAM.TXT.
A - KLAD20_MFG_GUIDE.DOC ;Renamed from KLAD20-USER-GUIDE.DOC because of
;conflict with another document by the same name.
;Updated to specify which KLAD release the document
;was last edited rather than state which release it
;is intended for.
D - KLAD20.UPD ;Deleted because comments about old KLAD releases
;are misleading and issues no longer a concern.
C - LOGIN.CMD ;Added logical name UT:
C - MFG-CLEAN.MIC ;Added "DEL COMMANDS.TV"
D - NI20.CTL ;Obsolete - Replaced by NI20.VER.
A - TTPRINT.CMD ;Added to set up terminal for typing documents.
D - UPDATE.INF ;Info on previous releases no longer needed.
;Replaced by UPDATE.MFG.
A - UPDATE.MFG ;MFG Updates for KLAD20-AB-6.1-A KLAD (This file).
D - US.MIC ;Temporary file created by CONFIG.
-----
<MFG.SRC> Directory:
A - 206X-MONITR.EXE ;2060-MONITR.EXE From TOPS20 Installation Tape
;with 1 patch installed to fix problem with
;DECNET when both NI20 and DN20's are being
;tested in Mfg. To be copied to <SYSTEM>MONITR.EXE
;by Mfg only when needed.
C - CONFIG.B19 ;CONFIG source from previous KLAD20-MFG-A tape.
C - CONFIG.B20 ;CONFIG source for current release (See CONFIG.EXE).
D - COPTST.MIC ;Obsolete test file.
D - DN1-BLD1.MIC ;Obsolete - Replaced by CONFIG routine.
D - DN1-BLD2.MIC ;Obsolete - Replaced by CONFIG routine.
C - DX20.NOTES ;Updated to explain installation of DX20 microcode
;including VMS-DX20 microcode used in MFG test.
A - DXMCA.V1071 ;DXMCA.ADX Version 71.10 VMS-DX20 microcode used by
;Mfg for testing DX20's (in Standalone Diagnostic
;mode) on KLAD20-Z-6.1-A.
A - DXMCA.V1074 ;DXMCA.ADX Version 74.10 VMS-DX20 microcode current
;release (not tested for this KLAD20-AB-6.1-A release)
;To be copied to <2-DIAGNOSTICS>DXMCA.ADX by Mfg
;only as needed (see DX20.NOTES).
D - DX20.VER ;Obsolete - Replaced by DX20.NOTES
D - KLAD20.UPD ;Deleted because comments about old KLAD releases
;are misleading and issues no longer a concern.
A - KLAD20_MFG_GUIDE.MIC ;Creates <MFG>KLAD20_MFG_GUIDE.DOC from
;KLAD20_MFG_GUIDE.RNO. Replaces KLAD20-USER-GUIDE.MIC
;Updated to delete all temporary files used in
;generating .DOC file and to put .DOC file
;in <MFG> area.
A - KLAD20_MFG_GUIDE.RNO ;Replaces KLAD20-USER-GUIDE.RNO. Source file for
;KLAD20_MFG_GUIDE.DOC
A - KLAD20_REV.B20 ;Source for program to write <UTILITES>KLAD20.REV
;from terminal input (not implimented).
D - KLAD20-USER-GUIDE.BTC ;Temporary file not needed.
D - KLAD20-USER-GUIDE.DOC ;Renamed. See KLAD20_MFG_GUIDE.DOC.
D - KLAD20-USER-GUIDE.MEM ;Temporary file not needed.
D - KLAD20-USER-GUIDE.MIC ;Renamed. See KLAD20_MFG_GUIDE.MIC.
D - KLAD20-USER-GUIDE.OLD ;Old version of KLAD20_MFG_GUIDE.DOC not needed.
D - KLAD20-USER-GUIDE.RNO ;Renamed. See KLAD20_MFG_GUIDE.RNO.
C - MFG-INSTALL.MIC ;Fixed misleading comment "INS-MFG.MIC".
;Fixed missing mic breakpoint.
;Removed copy of NCP.CMD to <SYSTEM>. (NCP.CMD
;was temporaty DN20N1.CMD file created by CONFIG.)
;Removed copy of DN20N1.CMD (temp file) to <SYSTEM>.
;Removed copy of KLAD20-USER-GUIDE.DOC to <MANUALS>.
;Added comment for TTKLIN.CMD.
C - MFG-SAVE.MIC ;Removed saving of NCP.CMD.
;Removed saving of DN20N1.CMD.
C - MFG-TAPE-SAVE.MIC ;Added terminal setting commands prior to getting
;DUMPER directory of tape.
D - NOTES. ;MFG update notes for previous release KLAD20-Z-6.1-A
;no longer needed. Replaced by UPDATE.MFG (this file).
-----
<MFG.UPD> Directory:
D - DN20N1.CMD ;Temporary file not needed.
D - NCP.CMD ;DN20N1.CMD tempory file. <SYSTEM>NCP.CMD should be
;created by NIPGEN per configuration.
C - RELIAB.CMD ;Temporary file created by CONFIG not needed.
C - UETP.CMD ;Temporary file created by CONFIG not needed.
-----