Trailing-Edge
-
PDP-10 Archives
-
k20v7b
-
mfg/cmds/mh10p2.cmd
There are no other files named mh10p2.cmd in the archive.
; MH10P2.CMD VER:0.1 12-1-78 M.L.R. 27911
;
; MH10 CHECKOUT PROCEDURE PART 2
; MH10 PROCEDURE SHEET SECTION 11.3
;
;P UB.RAM
;P MEMCON.A11
SED
CM1
^Z
; SET INTERLEAVE SWITCHES ON MH10 TO OFF
SED
CM1
^Z
; SET LOWER BOUNDARY ADDRESS SWITCH 14 TO A "1".
; TYPE JC WHEN READY TO PROCEDE.
SP
; VERIFY THAT THE MEMORY MAPS 2048K OF NXM
; BEFORE THE 256K OF EXISTING CORE.
SED
CM1
^Z
; SET LOWER BOUNDARY ADDRESS SWITCH 14 TO "0".
; SET LOWER BOUNDARY ADDRESS SWITCH 15 TO "1".
; TYPE JC WHEN YOU ARE READY.
SP
; VERIFY THAT THE MEMORY MAPS 1024K OF NXM
; BEFORE THE 256K OF EXISTING CORE.
SED
CM1
^Z
; SET LOWER BOUNDARY ADDRESS SWITCH 15 TO "0".
; SET LOWER BOUNDARY ADDRESS SWITCH 16 TO "1".
; TYPE JC WHEN YOU ARE READY.
SP
; VERIFY THAT THE MEMORY MAPS 512K OF NXM
; BEFORE THE EXISTING 256K OF CORE.
SED
CM1
^Z
; SET LOWER BOUNDRY ADDRESS SWITCH 16 TO 0.
; SET LOWER BOUNDARY ADDRESS SWITCH 17 TO 1.
; TYPE JC WHEN YOU ARE READY.
SP
; VERIFY THAT THE MEMORY MAPS 256K OF NXM
; BEFORE THE EXISTING 256K OF CORE.
SED
CM1