Trailing-Edge
-
PDP-10 Archives
-
iqlv30
-
iql3a.bwr
There is 1 other file named iql3a.bwr in the archive. Click here to see a list.
IQL3A Beware File Page 1
1. IQL3A changes the convention of naming saved (compiled) queries
with file extension .QRY to .INQ. This is because TOPS-20 uses
the convention *.Q* for EDIT backup files. Therefore under
both TOPS-10 and TOPS-20 it will be necessary to RENAME saved
query files from *.QRY to *.INQ.
2. The maximum record size in IQL is 4096 SIXBIT characters (3410
ASCII characters). For DBMS files, this means that the total
combined number of characters in all the record participating
in the particular subschema defining the dictionary must be no
more than 4096 characters, counting each FIXED BINARY REAL 35
and each DBKEY item as 6 characters, and each FIXED BINARY REAL
70 item as 12 characters.
3. The maximum number of dictionary entries which may be generated
by IQSCH is 2160, which means that the total number of all FD,
SD, DD, etc entries in any given sub-schema's diction cannot
exceed 2160. If your schema contains more than this number of
entries, create a sub-schema which includes a smaller number of
entries.
4. The maximum number of BIND arguments which can be generated is
512. This means that no one record may cause more than 512
"parameters", which includes item names, area-id's, aliases,
and direct keys, to be bound at one time.
5. The maximum decimal scaling factor is 9; therefore, DBMS data
items are limited to TYPE FIXED BINARY REAL 70,9.
6. The maximum number of item picture characters in dictionaries
is 19 characters. This is only a problem when dealing with
double-precision binary numbers and with non-default
alphanumeric fields (for instance, when including extra "/",
"-", etc.) The default alphanumeric picture is all "X"'s, which
does not have to appear in the dictionary.
7. DBMS dictionaies must contain the byte size in the RD entries,
in the form "006" for SIXBIT records and "007" for ASCII
records. Records which contain all COMPUTATIONAL-type items
are considered to be size "006".
Dictionaries generated by version 3 of IQSCH do not contain
this information, and it must be provided before using them
with IQL3A. The easiest way to do this is to regenerate the
dictionaries with Version 3A IQSCH (the Replace command now
works correctly). However, if significant effort would be
required to reinstall customized item column titles and/or
pictures, the IQL DEFINE command can be used to modify the RD
entries. The C (change) action code should be used to modify
the RD entries by responding to the "Record type:" prompt with
S for SIXBIT or A for ASCII.
NOTE
RD entries have been used by some sites for non-DBMS
applications. The information in these entries is now
used in different ways, so it is strongly recommended
that these sites use the DEFINE command in IQL3A to
re-create these RD's.
8. IQSCH V3A will accept schema names and sub-schema names in
lower case and correctly convert to uper case. HOWEVER,
privacy keys are NOT converted to upper-case, since they are
maintained in the .SCH file as ASCII characters, and may
legitimately contain lower-case, so use caution if you are
using a lower-case terminal.
9. IQSCH V3A now computes DBMS record lengths and origins
correctly. This was a problem mainly with data bases
containing ASCII records. Users should carefully check RD
entries in existing DBMS dictionaries, or should recreate the
dictionaries with IQSCH V3A.
10. All DBMS FIND rse's are supported with the following
exceptions:
1. FIND USING identifier. (rse 1)
2. FIND integer record-name RECORD OF ... (rse 3)
3. FIND identifier record-name RECORD OF ... (rse 3)
4. The SUPPRESS CURRENCY UPDATES options are limited to the
keywords ALL, RECORD, AREA, and SET. This only means that
currency suppression is not supported for explicitly named
sets.
5. In addition, the IQL3A syntax of rse 2 is
FIND OWNER IN set-name SET OF ...
where the keyword SET is required (this is different than
the COBOL syntax).
11. It has been observed that it is somewhat faster to do FIND rse
2 to reposition after some intervening FIND's than to save a
record key and do a FIND rse 1 to reposition. In other words,
do "FIND CURRENT ... RECORD" whenever possible in preference
to "FIND ... USING ...".
12. IQL3A no longer requires a FIND rse 3 to preceed a FIND rse 1
or FIND rse 5.
IQL3A Beware File Page 3
13. DBMS data types which are not supported by IQL3A are:
1. TYPE FLOAT BINARY REAL.
2. TYPE FIXED DECIMAL REAL.
3. TYPE FLOAT BINARY COMPLEX.
4. TYPE DISPLAY-9.
Additionally, the use of the OCCURS clause at the 02 data item
definition level in schemas is not supported. In order to
define a data structure, you must define it as
SIZE nnn WORDS USAGE DISPLAY
DISPLAY-6
DISPLAY-7
You may then use an OCCURS clause in the record descriptions in
the SUB-SCHEMA section, but be aware that IQSCH does not create
data items below the 02 level.
14. IQL3A considers any item name starting with "X" or "ZZ" to be a
created numeric variable. Therefore, care should be used when
generating dictionaries from DBMS schemas that no item names,
record names, etc, begin with either "X" or "ZZ".
15. Caution must be used when using the special logical variable
FIRSTIME in DBMS queries. The interpretation of this variable
is that it is TRUE on the first ACCESS to the data base, and
FALSE on subsequent ones, even though the multiple FIND's may
be within the same statement. Thus, the construct
IF FIRSTIME
FIND FIRST NAME-RECORD RECORD OF DATA-AREA AREA
FIND FIRST DATA-RECORD RECORD OF DATA-AREA AREA.
IF NOT FIRSTIME
FIND NEXT NAME-RECORD RECORD OF DATA-AREA AREA.
will result in having both the FIND FIRST ... and the FIND
NEXT ... statements executed on the first pass through the
query.
16. IQL is quite sensitive to COBOL/LIBOL versions with which it is
compiled, linked, and executed. The distributed .EXE files
were built with COBOL V12, and should only be used with
LIBO12.EXE V12. If any IQL modules are to be rebuilt, use
caution that the same versions of COBOL/LIBOL/LIBO12 are
consistently used. Also see the next note.
17. The Field Test version of COBOL V12A is not completely
compatible with IQL3A. The last patch line of Edit 535 was
inadvertently left out of the Field Test LIBOL. If COBOL V12A
Field Test will be used with IQL V3A, then the fix file on the
IQL3A Beware File Page 4
IQL3A tape called LIB12A.FIX must be installed in LIBOL.REL
V12A (and in LIBO12.EXE if sharable LIBOL is desired). This
will be corrected in the Field Image release of COBOL/LIBOL
V12A.
18. All IQL modules are now built and loaded using reentrant
LIBO12.EXE, except for IQE and IQSCH. This is due to a problem
in one of the DBMS subroutines used by these modules. It is
possible to build a version of IQE to use reentrant LIBO12.EXE
but it will not support any DBMS queries. (IQSCH is only used
for DBMS anyway). The procedure is
1. Be sure Edit 535 is installed in LIBO12.EXE
2. Recompile IQE, IQES, and IQCALL without the "/R" switch
3. Remove the "LIBOL.REL/LIB" from IQEBAS.CMD
4. Reload by saying "LOAD @IQEBAS"
5. Save the result as IQE.EXE
NOTE
Be sure to SAVE and not CSAVE on the DEC-20
IQU is also loaded with private LIBOL, because of the Edit 535
problem. If LIBO12.EXE is rebuilt to include Edit 535, IQU may
be relinked for reentrant LIBOL by recompiling without the "/R"
switch, and by removing %"SEG:LOW" and LIBOL.REL/LIB from
IQU.CMD.
19. FIND rse 6 is not officially supported by DBMS V5 and so is not
supported by IQL3A. It is possible to get access to the DBMS
subroutine FINS6 which does a sorted set search, but the CALL
verb must be used. A sample version of IQCALL which does this
is provided on the tape called IQFND6.CBL for illustration
purposes only, and will be considered a Category C product. In
any event, the FINS6 subroutine will not be available in DBMS
V6. FIND rse 6 will be officially supported in DBMS V6 and
IQL4.
20. IQL3A will accept queries up to about 200 statement long,
depending on the actual statements used and the number of items
used in the query. It is possible to increase the query size
acceptable to IQL by making source code changes in IQA and IQE,
with a corresponding increase in memory requirements. See
BIGRQS.MEM for more details.
IQL3A Beware File Page 5
21. IQL3A does not like to have two consecutive FD entries in
QPDICT.SEQ, with no intervening other entries. If nothing
else, put a CD (comment definition) entry after each FD in your
dictionaries (this is a good practice to follow in any case).
22. All files CREATE'd from DBMS source files will be SIXBIT
sequential files with record size equal to the total number of
characters in the items being used in the CREATE statement. In
addition, files are SORT'ed using a SIXBIT key, so sort keys
which contain lower-case characters will not be sorted strictly
in ASCII collating sequence.
Sequential files generated with the COPY statement will be in
the same character set as the originating data file in the case
of sequential and ISAM files. However, because DBMS allows a
mixture of character types in the same data base, IQL3A
attempts to copy the composite record consisting of the
concatenation of all of the extracted DBMS records into a
sequential SIXBIT file, but without doing any character
conversion. The resulting output file might then consist of
intermixed SIXBIT, ASCII, and even computational bit strings.
Because of these complications, it is recommended that the COPY
statement be used with great caution with DBMS input files, and
then only when the data base consist entirely of SIXBIT data
records.
23. Since IQL3A works internally in SIXBIT, all lower case
characters used in replying to ACCEPT's will be converted to
upper-case. This means that it is not possible to ACCEPT a
CALC key which contains lower-case characters (upper case ASCII
is OK, though).
24. All output from IQL3A will be in upper-case, even though the
data files may contain lower-case. ASCII nulls (000) are
ignored, i.e. they are not converted to spaces or anything
else, they are just skipped over.
Similarly, although it is possible to create data item titles
in lower case, the output will always be upper case anyway.
25. Comment lines are now defined as they are in COBOL, i.e. any
line in which the first non-blank character is an * is
considered to be all comment. No attempt is made to scan to
the next period to terminate the comment.
IQL now looks for comment lines in a query which start with
"**" and changes them to "* ". This is because the "**" is a
flag signalling the beginning of a new query, and comment lines
with two consecutive "**" are indistinguishable from this
start-of-query flag. The user should not be surprised,
therefore, if comment lines are changed from "**" to "* ".
26. Numeric items used in CREATE verbs will be written as 18-digit
numeric fields with implied decimal scale of 5. Note that the
PICTURE defined for such items is only followed for printing
IQL3A Beware File Page 6
the value of the item in PRINT or DISPLAY statements.
27. A problem exists when using the "R" picture character to round
a data item up. If the item has a value which will overflow
the picture field upon rounding, the printed value will be
zeroes. This occurs, for example, when rounding the value
99.998 into a picture "ZZ.99R" which will yield a printed value
".00". (Incidentally, the correct way to express a rounded
picture under parenthesis control for negative values is
"(((9.99)R". In this case, the value -123.456 would be printed
"(123.46)" ).
28. The correct way to express literals which are to be used in
centered headings is to put the "//" (new line) marks at the
beginning of the literal, not the end, otherwise the centering
algorithm does not work completely correctly (it misses by one
space too many on the left). For instance, the correct way to
do this would be:
HEADING "LINE 1//LINE 2"
"//LINE 3//LINE 4".
29. In order to resolve a syntatic parsing conflict, numeric
literals used in queries or when used in BROWSE/UPDATE may only
contain the characters 0-9, ".", '+", or "-", which follows
COBOL standards. This means that the numeric literal 12,345.00
is not allowed, but 12345.00 is allowed
30. When using Immediate mode to access an ISAM file, it is
recommended that BROWSE be used whenever possible instead of
UPDATE. This is because the run-time system invokes much more
overhead when the file is opened for I/O instead of just for
INPUT. Also, ISAM files opened for OUTPUT are effectively
locked for the exclusive use of one user at a time.
31. The number of .LPT files which can exist at one time is limited
to 36 per job per directory. This is because of the manner in
which file names are constructed from the job number and a
sequentially increasing "uniqueness" character, from "0" to
"Z". If is expected that a large number of .LPT files will be
created during an IQL session, it recommended that a RENAME be
done occassionally to make available more "creatable" .LPT file
names.
32. The IQL3A DEFINE command can change almost any field of any
entry in a dictionary EXCEPT the names of the dictionaries,
data items, etc. The dictionary (item, etc.) name CAN be
changed by using a text editor on the QPDICT.SEQ dictionary
file, but care must be taken. To do this, find the FD entry
(the record will start with the characters "FD") which contain
the name of the dictionary to be changed. Replace the name
with exactly the same number of characters as there are in the
record, i.e. if the new name is shorter than the old one, pad
the replacement string with spaces, or if the new string is
IQL3A Beware File Page 7
longer, replace the old name plus as many spaces as it takes
for the new name. The dictionary file entries are read by a
COBOL program which expects fields to occur in precisely
defined positions, and errors will be introduced if any fields
become offset from their expected positions. Remember to
remove line numbers from the QPDICT.SEQ file if you use a
line-numbering editor like EDIT-20 or SOS. (Also be sure to
change any queries which refer to the old dictionary name to
refer to the new one.)
33. In order to completely delete a dictionary field with the
DEFINE command, give the key word BLANK (or BLANKS) in response
to the prompt. Any field may be blanked this way, except for
the name of the entry itself.
34. The maximum length of any given query line is 80 characters.
Query statements, however, can extend over several lines, as
long as literals or item names are completely contained within
a single line (no word can be broken across two lines).
For example, a query might contain:
..
..
PRINT A,B,
C,D,
E,F.
35. The intention of the HOLD verb is to preserve the contents of a
record item. It is possible to use it to hold a created
variable item, but remember that this is not sufficient to
cause the variable to be created in the first place. The HOLD
essentially "reads" the contents of the item mentioned, and if
a variable is used in a HOLD without first creating it with a
COMPUTE, SET, etc., IQL will assume that an undefined item is
being referenced.
36. IQL3A has a special logical test variable called NEWGROUP
(synonym is NEWGRPV) which can be tested in an IF statement (IF
NEWGROUP OF item ...). It is FALSE as long as the named item
does not change value from one data record to the next; it is
TRUE whenever the data item changes value in the same fashion
as occurs with the TALLY BY statement. This allows for
conditional actions to be taken other than just the effects of
the various summary verbs (this exists in IQL3, it was
inadvertently left out of the manual).
37. Created variables do not preserve their contents across phases
of a query (which are separated by SORT statements).
38. IF statements MUST have a TRUE clause.
In other words, "IF A = B ELSE ..." is an illegal construct.
IQL3A Beware File Page 8
39. When defining a dictionary for an ISAM file, the file name to
use when responding to the DEFINE prompts is the name of the
index file (usually the file with the .IDX extension). The
file name to use when defining DBMS files is the .SCH file, but
since this is done automatically by IQSCH, there should seldom
be occassion to change this.
40. Although the system text editor is available to write queries
in IQL for TOPS-20, it is not possible to do the same thing for
TOPS-10. This is due to the generalized process forking
mechanism available in TOPS-20 but absent from TOPS-10.
41. The reserved word list has necessarily grown as a result of
on-going development of IQL. Since it is possible that old
dictionaries may contain some of these reserved words as data
item names, it is recommented that the list be consulted and
compared to item definitions in older dictionaries. The list
is distributed on the tape as RESERV.LIS.
42. Because IQL3A must provide dummy .IDX files to satisfy LIBOL at
RESET time, certain assumptions have to be made concerning
"universally" common parameters of users' ISAM files. In
particular, the dummy files ISAMF6.IDX and ISAMF7.IDX are
constructed describing a data file blocked 10 and index file
blocked 50. As long as user files are less than these blocking
factors, LIBOL will issue a warning message but will correctly
process the files. However, if these blocking factors are
EXCEEDED, different actions must be taken for each case.
1. If the INDEX blocking factor is greater than 50, the
easiest way to fix the problem is to COPY (not RENAME) from
the real data index file to the dummy file (ISAMF6 if the
data file is SIXBIT, ISAMF7 if the data file is ASCII).
2. If the DATA blocking factor is greater than 10, it will be
necessary to modify the source code in modules IQE.CBL and
IQU.CBL. See the file named RECLEN.MEM on the distribution
tape for more details on this procedure.
43. If column titles are turned off in the middle of a query
("TITLES OFF"), columnar data such as decimal points will not
be lined up properly. Titles should either be left on or
turned off for the entire generation of a particular page to
avoid this problem.
44. Caution should be used when using the same name for more than
one entity in IQL3A. For instance, it is all right to have a
dictionary, a query, and a file name all with the same name,
but it is incorrect to have a dictionary and an item or
password with the same name. The best policy to follow is to
never use the same name twice for anything.
IQL3A Beware File Page 9
45. IQL3 does not supported nested IF statements. In order to
properly detect and diagnose an attempt to use a nested IF
statement, IQL3A will not accept any use of the keyword "IF"
more than once in a statement. This has the consequence that
constructs of the form
IF a = b OR (or AND) IF c = d ...
which previously were accepted as a compound IF expression
(i.e. the second "IF" was discarded as a guide word) will no
longer be acceptable. If you have any queries which use this
construct, you will have to edit them to remove the extraneous
"IF"s. Notice that this makes IQL use of compound logical
expressions compatible with COBOL usage.
46. The REWRITE verb now works correctly when used in a query to
replace an existing ISAM record. Caution, however, is
recommended when using this verb that your data files are in
fact being correctly updated.
47. An undocumented, but very useful, feature of the DEFINE command
when used to define a NEW dictionary is:
DEFINE AUTO
which will automatically compute and fill in the starting
positions of DD entries being defined for this dictionary. The
"Loc of first char of item" prompt will be suppressed, and will
be filled in automatically by the next sequential position in
the record being defined. If is is desired to define
overlapping data items, these can be added later.
48. Statement numbers may be places on any statement, but
statements MUST be two, and exactly two digits, and they must
be places in columns 1 and 2 of the line. Thus, use 01, not 1
as a statement number. Also, use some caution when doing "GO
TO"'s. Do not GO TO an OPEN statement after it has been
executed once. Do not GO TO statements outside of the current
phase, i.e. do not GO TO statements above a preceeding open or
SORT, nor to statements below a succeeding SORT.
49. The example definition of the logical name DSK: given on page
1-4 of the IQL User's Guide is incorrect. All redefinitions of
DSK: should include DSK: itself as the first element of the
search string, so that the user's connected directory is the
first directory to be used when accessing DSK: Thus, the
example should read:
@DEFINE DSK: DSK:,<DIRECT1>,<DIRECT2>
Any other use of redefinitions of DSK: must be done with great
care, as problems may occur in the functioning of PA1050.
IQL3A Beware File Page 10
50. A panic interrupt feature is available to TOPS-20 IQL users.
See file SETINT.MEM for more details.
51. Alpha-numeric variables are those which start with the letter
"A". Dictionary data items may also begin with the letter "A".
Alpha-numeric variables default to 12 characters in length
UNLESS they are initially set to a value with more or less
characters. For example, if AVAR is to be used in a query, and
it needs to be 20 characters long, the first statement in the
query should set AVAR to 20 blanks to define the size of the
variable, as follows:
SET AVAR TO " ".
52. Numeric variabled are scaled 13.5 always. Thus, even in a
PICTURE verb is used to redefine the display picture, any
ACCEPT verbs will prompt for a 13.5 numeric quantity, and the
internal representation of the variable will be similarly
scaled 13.5.
53. File DBMSPG.MEM replaces the DBMS FIND verb documentation in
the IQL USER'S GUIDE.
54. The SCAN feature when used with numeric data items now works
correctly.
55. Internal calculations when using the COMPUTE verb are carried
out in 13.5 precision (13 whole number digits, and 5 fractional
decimal places, for a total of 18 digits). This is
satisfactory for most applications, but if calculations are
done with small fractions, appropriate scaling should be done
to preserve accuracy.