Trailing-Edge
-
PDP-10 Archives
-
decuslib20-04
-
decus/20-0000/conversion-status.mem
There are 10 other files named conversion-status.mem in the archive. Click here to see a list.
Conversion Status [2 Feb 81]/HDT
DECsystem-10/DECSYSTEM-20
DECUS Library Program Conversion
Report of Disposition of Programs
by DEC-10 Catalog Number
The following list describes the status of the programs in
the DECUS DECsystem-10 Program Library as they were converted to
the DECUS DECSYSTEM-20 Program Library. An attempt was made to
compile, load, and verify that execution begins for each of the
packages as noted, except that packages using DECtapes or
papertapes were deleted immediately since they are not supported
on the DEC-20. The term "runs successfully", as used below,
indicates that the program did at least begin execution and may
have run to completion but that no test data were available for
verification of the accuracy of the results. The term "runs
correctly" indicates that the program ran a supplied test set
correctly (as verified by the documentation supplied with the
program) or correctly executed with an obvious test case.
"10" "20"
Number Number Disposition/Status
3 - DTLOTS
Deleted: DECtape utility not useful on "20"
6 - Scholar/Teach
Deleted: some I/O routines are supplied as
F40 .REL files (no source) and cannot be used
on the "20".
8 - DECtape DDT
Deleted: DECtape utility not useful on "20".
9 - MUSIC
Deleted: Designed to be an executive-mode
program, which cannot be run on the "20".
10 - EIGHT and EDIT8
Deleted: DECtape utility not useful on "20".
12 0005 PAL-10
Minor modification required in logical name
list; compiles, loads, and runs
successfully.
15 - FAIL
See 10-86 (FAIL/SAIL).
22 0006 JACOBI
Converted subroutine calls to PUSHJ/POPJ;
now compiles correctly. Execution testing
not done.
Page 2
23 0007 SPEEDY (PDP-10/8 Loader)
Loader appears to run from a load of the .REL
file (no testing done). Source file is
garbled and cannot be used to generate the
.REL file.
25 - ONCE
Deleted: Specific to TOPS-10.
27 0008 GASP II
Compiles and loads cleanly. No further
testing done.
28 - SIM-11
Deleted: Converted the .SAV file to .EXE and
program appears to run. But attempt to
reload from source files did not work -
appears to enter loop during program
execution. Needs work to correct source
files.
29 - PDP-8/10 Real-Time System
Deleted: TOPS-10 specific.
30 0009 NVERTX
Compiles with some warning messages, loads,
and runs to completion with the test data
supplied.
31 0010 PALX-11
Compiles, loads, and begins execution. No
testing done.
33 0011 W
Converted octal constants to form required by
FORTRAN-20; program compiles and runs.
34 - ECAP
See the WMU library for a functioning version
of ECAP.
36 - ARP
Deleted: JSA/JRA subroutine calls,
incomplete source files, numerous compilation
errors. Appears to be beyond recovery.
37 - TRACE
Deleted: requires ARP. (The two subroutines
in TRACE compiled cleanly, however.)
38 0012 FLOW CHARTER
Compiles, loads, and runs successfully.
43 0013 RANDOM NUMBERS
Converted subroutine calls to PUSHJ/POPJ;
programs now compile, load, and run
successfully. Results not checked for
Page 3
accuracy.
57 0014 SIMPLE
Converted subroutine calls to PUSHJ/POPJ;
programs now compile, load, and correctly run
the test data supplied with the programs.
59 0015 LISP 1.6
Redefined JOBDAT symbols and replaced one
outdated JSYS. Some possible problems with
source file ALVINE.MAC (HRRZ@ opcodes). No
testing done on this package.
61 0016 MLISP
No modifications required. Package is
expected to be a transportable LISP package,
but no testing was done.
65 0017 LEARNS
Program compiles, loads, and runs
successfully.
68 0018 PAL-12
Modified logical name search; program
compiles, loads, and successfully executes
two test programs supplied.
70 0019 FAKE
Converted subroutine calls to PUSHJ/POPJ and
redefined JOBDAT symbols. Program assembles;
no testing done.
72 0020 DARTMOUTH BASIC LIBRARY
Random sample of programs tested appear to
function correctly.
86 0002 SAIL/FAIL
Original DEC-10 version has been supplemented
by some routines supplied by Charles Hedrick
of Rutgers which fix bugs on the DEC-20.
Program appears to compile correctly.
87 - MATRIX
Deleted: Source files are missing and
supplied .REL file for FREEST is from F40
(not usable).
88 0021 SALESMAN
Program compiles and runs successfully.
89 0022 JOTTO
Typographical errors were corrected. Program
compiles but needs a dictionary.
Page 4
90 0023 BARTEE
Redefined JOBDAT symbols; program
compiles,loads, and correctly executes test
data given in .DOC file.
93 - BCDPIP
Deleted: Program will not take 1600 bpi
tapes, there are few IBM 7040 tapes to
convert any longer, and other alternatives
(e.g., CHANGE) exist.
97 0024 BASIC TUTORIAL
A random sample of programs tested functioned
correctly.
98 - PUNCH
Deleted: No papertape punch on the "20".
100 0025 ONLINE BASIC AND FORTRAN DEMOS
A random sample of the BASIC programs ran.
FORTRAN files which did not run were modified
for FORTRAN-20 compatibility. Files were
given filetypes .BAS, .FOR, and .TXT,
depending upon their functions. Calling
sequence of RAND.MAC was converted to
PUSHJ/POPJ.
101 0026 SSP
Programs ran without modification and gave
results in agreement with expected test
results to within 5 to 7 significant figures.
102 0027 PDP-8 SIMULATOR
Converted JOBDAT symbols; compiles, loads,
and runs successfully.
103 - RESDEC
Deleted: requires DECtape drives.
104 0028 SNOBOL4
Converted .SHR to .EXE file; the .EXE file
runs. No attempt to recompile and reload
(which should be done).
105 0029 DOCTOR AND ELIZA
Converted .SAV to .EXE file, which functions
correctly. No source file is included.
107 - CFILE
Deleted: program doesn't function correctly
and duplicates functions of the executive
TAKE command on the "20".
110 0030 CHESS
Converted .SAV file to .EXE file, which
functions correctly. No source file is
included.
Page 5
112 - GOOF
Deleted: requires DECtape drives.
113 - MULPAC
Deleted: These programs require extensive
modification for the "20" because of the
standard use of JSA/JRA calling sequence and
the strong interrelation between different
MACRO modules of the code.
114 0031 MATTAC
Converted .SAV file to .EXE file, which runs.
115 0032 TAPBLK
Converted .SAV file to .EXE file, which
begins execution. Did not test.
116 0033 QED
Redefined JOBDAT symbols. Program compiles,
loads, and executes.
117 - IFTYP
Deleted: uses F40 LUUO's.
120 - DYNAM
Deleted: virtual memory capability of
TOPS-20 makes this of little use.
121 - CUSPER
Deleted: uses F40 conventions for argument
counting which are difficult to convert.
122 - CSMP-10
Deleted: Use the version of CSMP from the
WMU library instead.
126 - TAPTST
Deleted: Designed to work with DEC-10
magnetic tapes (556 bpi).
127 - PCPY
Deleted: Specific to TOPS-10.
130 0034 RENMBR
Compiles, loads, and runs successfully. The
.CMD file was modified for TOPS-20.
133 0035 ALGOLW
Redefined JOBDAT symbols. Program compiles,
loads, and runs successfully.
134 0036 FISHER
Edited the source file to delete extra
CRLF's. Program compiles, loads, and runs
successfully.
Page 6
135 - ALOCSP
Deleted: Specific to TOPS-10.
136 - DEC-10 DEMO PACKAGE
Deleted: depends upon EDIT-10.
137 0037 COB300
Modified one variable to be a non-reserved
word; program compiles and loads. Should be
tested on a Burroughs COBOL program.
138 - FFM
Deleted: source files are missing, and the
.REL library is F40-compatible.
139 0038 TALK8F
Redefined format of octal constants and
redefined JOBDAT symbols. Program compiles,
loads, and runs. Needs a PDP-8 for testing.
140 - DSKDTA
Deleted: DECtapes not supported on a "20".
141 - EXCON
Deleted: DECtapes not supported on a "20".
142 0039 MATHLAB
Converted .SAV to .EXE file, patched ESC
character as described in manual. Program
ran test case in manual correctly. Program
should be recompiled and reloaded.
143 0040 COBSTD
Minor syntactical correction required, but
otherwise program compiled, loaded, and ran
successfully.
145 - RUNH
Deleted: Specific to TOPS-10.
148 - LOD11X
Deleted: requires TOPS-10 monitor patch (not
applicable for TOPS-20).
149 - EDITOR
Deleted: DECtapes not supported on a "20".
151 0041 KWIC
Compiles, loads, and runs successfully.
152 - RIPOFF
Deleted: Specific to TOPS-10.
153 0042 CHANGE
Redefined JOBDAT symbols. Program compiles,
loads, and runs. Needs testing. Note that a
revised version is available directly from
Page 7
DEC.
154 - COBOL QUEUEING ROUTINES
Deleted: Specific to TOPS-10.
155 - USET
Deleted: Specific to TOPS-10.
156 0043 ASYNC COMMUNICATION WITH PDP-8
Redefined JOBDAT symbols and altered logical
name search. Programs now compile, load, and
run. Needs testing with a PDP-8.
157 0044 STREAM
Changed subroutine calls to PUSHJ/POPJ's.
Fixed up argument list references. Program
now compiles and loads. Needs testing.
159 0045 PAGER
Program compiles, loads, and runs
successfully.
160 - TERBIN
Deleted: Papertape not supported on "20".
161 0046 ABACUS
Minor modifications required because of MACRO
version changes. Program compiles, loads,
and runs successfully.
162 - POOMAS
Deleted: Use SIMULA instead. Compilation
problems with manner in which JOBXXX symbols
were defined.
164 0047 CROSS
Created IOFIL.FOR to handle IFILE/OFILE
subroutine calls from F40 and modified
RENAME.MAC to use PUSHJ/POPJ calls. Modified
FORMAT statements. Program now compiles,
loads, and runs test case correctly.
165 0048 RDMT11
Compiles, loads, and runs successfully.
Needs testing with PDP-11 magnetic tapes,
though.
166 - BLOCK
Deleted: redefining JOBDAT symbols and
successfully reloading source code generated
a file which would not run successfully.
Functionality duplicated by CHANGE available
from DEC and DECUS.
Page 8
167 0049 GENPLT
Added DOUBLE PRECISION statement to allow 6
characters per word. Programs compile, load,
and run test case correctly.
168 0050 TBLTRN
Modified one macro subroutine to use
PUSHJ/POPJ calling convention. Program
compiles, loads, and runs successfully.
169 0051 CTFFT
Program compiled, loaded, and ran one test
file correctly (within roundoff error).
Other test file (for subroutine FOURG) was
garbled at time of original submittal.
Subroutine compiles, though no testing was
done on it.
170 0052 UFLIP
Program compiled, loaded, and ran test case
correctly.
171 0053 CARDIAC MACHINE LANGUAGE SIMULATOR
Corrected one mistyped line in the BASIC
program. Program runs successfully.
173 0054 FLMON
Program compiles, loads, and runs
successfully. Needs testing with a plotter.
174 - LCAP
Deleted: use version from WMU package.
175 - CHAINR
Deleted: Specific to TOPS-10.
176 - ACCTG
Deleted: Specific to TOPS-10.
177 0055 SIGN MAKER
Changed format of octal constants to
FORTRAN-20 form; changed DEFINE FILE to
OPEN; and changed search for SIGN.LIB from
[1,4] to SYS:. Program compiles, loads, and
runs correctly.
178 0056 MTIO
Changed calling sequence to PUSHJ/POPJ.
Program compiles and loads. Needs to be
tested with a magtape and main program.
179 0057 FASBOL
Converted .SAV to .EXE file, which appears to
run (saved as FASBOL.EXE). Recompiled,
reloaded, and saved as SNOBOL.EXE (which
appears to run correctly).
Page 9
181 0058 EDITS
A spurious character in source file was
deleted. Program compiles, loads, and runs
successfully.
182 0059 TXTPAD AND TXTTAB
Programs compile. TXTPAD has undefined
globals on loading because of need for
hardware routines. TXTTAB ran successfully.
183 0060 GRAPH
Subroutines compile with warnings.
184 0148 SPELL
Original program failed to compile because
symbols in conditional statements weren't
assembled and defined. Simple fixes to
source file were required. Also fixed error
which demanded a dictionary file even if one
had been loaded. Program now compiles and
runs correctly.
185 0061 SYNTAX
Fails to compile, but code is sufficiently
similar to PASCAL that only minor
modifications should be needed to convert to
PASCAL. Files left on distribution in hopes
that an interested user will revise and
resubmit.
186 0062 META2
Redefined .JBFF; program compiles, loads,
and runs successfully.
187 0063 ASYNCH COMMUNICATION
Converted calling sequence to PUSHJ/POPJ for
FORTRAN subroutines. Programs compile and
load. Needs testing.
188 - Z
Deleted: Specific to TOPS-10.
189 0064 MAFIA
Redefined JOBDAT symbols. Program compiles,
loads, and runs successfully. Needs testing.
190 0065 BATTLESHIP
Program runs.
190 - DECTAPE ACCOUNTING
Deleted: DECtapes not supported on a "20".
193 0066 *1
Needs to be recompiled. No testing done.
Page 10
195 - GRAFITI
Deleted: FORTRAN calling conventions are
wrong; one source file (XFILE) is missing
and the corresponding .REL file was compiled
with F40.
196 - MTFILE
Deleted: Specific to TOPS-10 (in internal
symbols used by program). Considerable
conversion effort required.
197 0067 FILTER
Sources compiled with numerous errors caused
by use of (new) reserved words. Changes yet
to be made but should be easy to fix.
198 0068 IMP72
Converted .SAV file to .EXE, which ran
successfully. Recompilation fails for some
program modules.
199 - COFUP
Deleted: Specific to TOPS-10.
200 0069 VTED AND RTRANS
RTRANS runs correctly. VTED needs testing on
DEC VT terminals.
201 - LOST
Deleted: Specific to TOPS-10.
202 - MANTIS
Deleted: Specific to TOPS-10 (F40 compiler).
203 0070 GUNNER
Program runs correctly.
204 - OPR
Deleted: Specific to TOPS-10.
205 - OPEN
Deleted: Specific to TOPS-10 (F40 compiler)
and functionality is readily available in
FORTRAN-20.
206 - BAKWDS
Deleted: Specific to TOPS-10.
207 0071 EYES
Compiles, loads, and runs successfully.
208 0072 SCAT2
Program compiles, loads, and runs
successfully.
Page 11
209 0073 RANDU
Subroutine compiles, loads, and runs
successfully. Results not verified for
accuracy.
210 - UCI-LISP
Deleted:
LISP program fails in execution while
looking for LISP.HGH - appears to be a
readily correctable error, but with other
versions of LISP available, this version
would likely not be of great value.
211 0074 GNOSIS
Program compiles, loads, and runs
successfully.
212 0075 SPPLT AND SPTEX
Programs compile and run successfully.
213 - BLISS-11
Converted .EXE files did not run.
Recompilation of sources gave numerous
errors.
214 0076 ABACUS
Converted JOBDAT symbols. Program compiles,
loads, and runs successfully.
217 - DFCODE
Deleted: DECtapes not supported on a "20".
218 - PALDIS
Deleted: Papertape not supported on a "20".
219 - CHECKING ACCOUNT BALANCER
Program not tested due to lack of working
FOCAL at time of evaluation.
220 - TOPSTEACH
Deleted: Specific to TOPS-10.
221 0077 NMRSIM AND TTYOPS
Changed subroutine calling sequence to
PUSHJ/POPJ; programs compile, load, and run
successfully. No testing without plotter
hardware.
222 - FFT
Source file was garbled and unusable.
223 0078 SIMULA
Compiler assembled, loaded, and ran
successfully. Note an error message
associated with module M2.MAC which is
apparently caused by a misplaced conditional
Page 12
terminator, but the resulting symbol is
properly defined as external nevertheless.
Note that the package has been reorganized to
contain just DEC-20 code.
224 0079 SPICE/SLIC/SINC
Programs compile, load, and run correctly.
225 - POET
Deleted: Specific to TOPS-10.
226 0080 AVAIL
Programs compile, load, and run correctly.
Note that there is a requirement for
directory numbers, though. This program
should be modified when a native-20 FOROTS
system is available.
227 0081 UTILITIES
Some programs in this package needed COBOL
variable-names to be changed because of
changes in COBOL reserved words; they then
compiled, loaded, and ran successfully.
Others in the package appear to be incomplete
and unusable. Complete package is left in
the library for those who want to work on
them.
228 0082 CALCOMP PLOTTER PACKAGE
Some modifications required to get package to
load properly. Programs compile, load, and
run successfully. Requires plotter hardware
to verify.
229 0083 ASTRO
Program compiles, load, and runs
successfully.
230 0084 ASYNCH COMMUNICATION
Programs compile, load, and run successfully.
No testing done.
231 - TULIP
Deleted: Numerous compilation errors.
Functionality available in TOPS-20 JSYS's.
233 0085 ZAP
Program compiles, loads, and runs
successfully.
235 0087 LAN
Programs run. No testing done.
236 - FOLD
Deleted: Papertapes not supported on a "20".
Page 13
237 0088 PILOT
Modified compiler to look for PILOT.EXE
rather than PILOT.SHR. Compiler compiles
with a few MACRO "E" errors, but loads
successfully. Resulting program successfully
compiled the demo program supplied.
238 0089 EXETER
Programs compile (with truncation warnings),
load, and run successfully.
239 - RWATCH
Deleted: Specific to TOPS-10.
240 0090 KISMET
Modified search path for help file. Program
compiles, loads, and runs successfully.
241 0091 FORTH
Compiles, loads, and runs successfully.
242 - IOLIB
Deleted: Specific to TOPS-10, and
functionality reproduced in TOPS-20 JSYS's.
243 - PIRETS
Deleted: Uses features of the TOPS-10
monitor not available on TOPS-20.
244 0092 WGMM11
Corrected garbled characters in middle of
source file. Program now compiles, loads,
and runs successfully.
245 0093 MESS
Programs compile, load, and run successfully.
246 - RECSM
Deleted: source files garbled; when
corrected, program still gives illegal memory
access.
247 - HEXPAWN
Deleted: Written for XBASIC, not known to be
available for the DEC-20.
248 0094 TR
Program compiles, loads, and runs
successfully.
249 0095 GAUSS
Subroutines compile. No testing done.
251 0096 TBF
Program compiles, loads, and runs
successfully.
Page 14
252 - SOS
Deleted: Functionality duplicated by TOPS-20
EDIT, and SOS doesn't use full TOPS-20 file
specifications.
253 0097 READ
Program compiles, loads, and runs
successfully.
254 0098 MAGGIE
Program compiles, loads, and runs
successfully. Needs testing with magnetic
tape.
255 0099 INVSIM
Program compiles, loads, and runs
successfully.
256 - D2D
Deleted: Specific to TOPS-10.
257 0100 LINCUR
Revised submittal lacked functions DARCOS and
DARSIN which were in the sources for original
submittal. These were copied from original
into file DAFUNS.FOR and the load command
string modified. File LINCUR.CTL contains
revisions necessary to compile, load, and
test revised version on a DEC-20. Programs
compile, load, and run successfully.
258 0101 NONLIN
Revised submittal lacked functions DARCOS and
DARSIN which were in the sources for original
submittal. These were copied from original
into file DAFUNS.FOR and the load command
string modified. File NONLIN.CTL contains
revisions necessary to compile, load, and
test revised version on a DEC-20. Programs
compile, load, and run test data correctly.
259 - PDO
Deleted: DECtapes not supported on a "20".
260 0102 INFORMATION STORAGE AND RETRIEVAL
Program compiles and runs successfully.
261 0103 SORTER
Program compiles and runs successfully.
262 0104 COMPUT AND TWOPER
Programs compile and run successfully.
263 - DSKCPY
Deleted: Specific to TOPS-10.
Page 15
264 0105 XTEC
Program compiles, loads, and runs
successfully.
265 0106 BASIC 17E
Note that there are no sources. The .SHR
files were converted to .EXE files and ran
correctly. Note the bugs listed in the
review.
266 0107 TOPS-10 SIMULATOR
Compiles with warnings, loads, and runs
successfully. No documentation of format of
parameter file.
267 0108 COBEDT
Program compiles, loads, and runs
successfully.
268 - IPCF10
Deleted: Specific to TOPS-10.
269 0109 ADRES
Program compiles (under SIMULA, 20-0078),
loads, and runs successfully.
270 0110 PROC10
Converted .SHR to .EXE file, which runs.
Source modules missing and so cannot
recompile and reload package.
271 - PASCAL
Deleted. See 20-0003 (10-283).
272 0111 BESLIB
Program compiles, loads, and correctly runs
test case.
273 0112 INDEX
Program compiles, loads, and runs BESLIB test
case successfully.
274 0113 CADA
Program compiles and runs successfully.
275 - DTSORT
Deleted: DECtapes not supported on a "20".
276 0114 FPRINT
Subroutine compiles correctly. Not tested.
277 0115 TWOSID
Program compiles, loads, and runs correctly.
Page 16
280 - CLUSTR
Deleted: Source files missing and use
non-standard plotting routines, also not
supplied.
281 - SAFIO
Included as a subdirectory under SIMULA,
20-0078.
282 - SIMDBM
Included as a subdirectory under SIMULA,
20-0078.
284 0118 PICTURE BOOK
Programs compile, load, and run successfully.
285 0119 SQUASH
Modified subroutines to use PUSHJ/POPJ
convention; program compiles, loads, and
runs successfully.
286 0120 CUSH2
Program compiles, loads, and correctly
executes test data from documentation.
287 - BOSS
Deleted: Uses IPCF10 DECUS Library program,
and accounting structure for TOPS-20 is
different anyway.
289 - REV
Deleted: Program compiles, loads, and begins
execution. It is unreliable, though, and
would need extensive rewriting to be
functional.
290 0121 VENN
Program compiles, loads, and runs
successfully.
291 0122 XPL
Program compiles, loads, and runs
successfully.
292 0123 REVISED PLOTTER SUBROUTINES
Programs compile, load, and run successfully.
293 0124 FLECS
Program compiles, loads, and runs
successfully. Implementation manual, which
was supposed to be with package, was not.
294 0125 GIDUS/DISLIB
Programs compile successfully. No testing
done. New command file was created.
Page 17
295 - SIMULA FOR KA-10
Deleted: Specific for TOPS-10.
296 - BLISS-11/RSX-11M INTERFACE MACROS
Deleted: BLISS-11 not functioning.
297 0126 ATOPLT
Program compiles, loads, and runs
successfully. Needs testing.
298 0127 NORMAL
Program compiles, loads, and runs
successfully.
299 0128 COPYMT
Program compiles, loads, and runs
successfully.
300 0129 BAKGMN
Program compiles, loads, and runs
successfully.
301 0130 STRMAC
Program compiles, loads, and runs
successfully.
302 0131 LIBMAN
Program compiles, loads, and runs correctly
(except that the DIRECT program doesn't exist
on TOPS-20).
303 0132 DUMPR
Program compiles, loads, and runs
successfully.
304 - XGLOB
Deleted: Program compiled and loaded but
failed during execution apparently because of
the way it dynamically used memory and tried
to reread the program over data. Would need
work to run on TOPS-20.
305 0133 BIORTH
Replaced a GETTAB UUO with GTAD JSYS.
Program compiles, loads, and runs
successfully.
306 0134 FOCAL-10
Program compiles, loads, and runs
successfully. Extensive testing not done.
307 0135 VIDED
The source file for VIDED generates
undefined- and multiply-defined globals
during loading. Source files for latest
version are in COMP subdirectory, .EXE files
from earlier version are in SYS subdirectory.
Page 18
308 - PLOTY
Deleted: Files are garbled and useless.
Programs will be added at later date if
correct files can be located.
309 0136 MACY-11/LNKX-11
Programs compile, load, and run correctly.
310 0137 WMU Application Library
Most programs work as submitted. Some work
done to load without overlays. Complete
package has been split into separate
subdirectories for ease of access.
311 - BRDEAL
Deleted: Files are garbled and useless.
312 0138 MAGTAPE UTILITY PACKAGE
Programs compile, load, and run successfully.
313 - DIRSRT
Deleted: TOPS-20 directories are already
sorted.
314 - SCAN.DOC
Deleted: Functionality already exists in
TOPS-20 COMND JSYS.
315 - DTCERT
Deleted: DECtape not supported on a "20".
SCAN is specific to TOPS-10.
316 0139 TECO10
Renamed files to TECO20, recompiled with
TOPS-20 option on. Compiles, loads, and
runs. Does not recognize filename supplied
on command line, but does seem to function.
317 0140 CROSS
Program compiles, loads, and runs
successfully.
318 0141 FASP
Modified dimensions of COMMON FASPG to have
modules agree on size. Program compiles,
loads, and runs successfully.
319 0142 WKDAY
Program compiles, loads, and runs correctly.
320 0143 STRUCT
Macros compile and seems to work.
321 - FORUM
Deleted: Specific to TOPS-10, and
functionality is already existent (almost) in
TOPS-20 TALK command.
Page 19
322 0144 CALENDAR MAKER
Data files generate output as desired.
323 - TRAD8
Deleted: Paper tape reader not supported on
"20".
324 0149 MULREG
Program compiles with warning messages and
loads and runs correctly (when compiled with
the DEC-20 SIMULA from DECUS).
325 0145 ANTE
Compiles, loads, and runs successfully.
326 0146 KEYWRD
Compiles, loads, and successfully runs test
case supplied by author.
327 - PENNZYME
Deleted: Undefined globals for routines not
submitted with program. Author will resubmit
package.
328 0147 FORMAT
Compiles, loads, and successfully runs test
case supplied by author.
- 0001 CALC (TOPS-20)
Compiles, loads, and runs successfully.
Indirect commands do not appear to function.
283 0003 SYSTEMS PROGRAMMERS PASCAL
Native-20-mode System Programmer's PASCAL
from Charles Hedrick at Rutgers.
- 0004 INTERLISP (TOPS-20)
Patched BOOT.SAV to replace a JSYS which had
been deleted after Release 2 of TOPS-20;
program now begins execution. Note that no
source files are supplied (.EXE only) and
that the first chapter of the manual is
missing. Other chapters renamed *.DOC.