Enter your search terms Submit search form
	Web pdp-10.trailing-edge.com

.;11-MAY-77-GR
\\
.LM 0;.RM 70;.F;.J;.FLAG CAP;.TS5;.SP 1
^^DTELDR.DOC\\ -- ^V1(21)
.BR
^DECEMBER 1976
.FG30
^COPYRIGHT (^C) 1976,1977
.BR
^DIGITAL ^EQUIPMENT ^CORPORATION, ^MAYNARD, ^MASS.
.B 2
^THIS SOFTWARE IS FURNISHED UNDER A LICENSE FOR USE ONLY ON A
SINGLE COMPUTER SYSTEM AND MAY BE COPIED ONLY WITH THE INCLUSION
OF THE ABOVE COPYRIGHT NOTICE. ^THIS SOFTWARE, OR ANY OTHER
COPIES THEREOF, MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE
TO ANY OTHER PERSON EXCEPT FOR USE ON SUCH SYSTEM AND TO ONE WHO
AGREES TO THESE LICENSE TERMS. ^TITLE TO AND OWNERSHIP OF THE
SOFTWARE SHALL AT ALL TIMES REMAIN IN ^^DEC\\.
.B 1
^THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ^DIGITAL
^EQUIPMENT ^CORPORATION.
.B 1
^^DEC\\ ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY ^^DEC\\.
.TITLE <DTE1.DOC
.PG
<DTELDR.DOC -- ^V1(21)
.BR
^DECEMBER 1976
.B 3;.LM 0
1.0##<SUMMARY
.B 1
<DTELDR IS A PROGRAM TO DUMP AND BOOTSTRAP FRONT ENDS CONNECTED TO THE
<KL10 (1080 OR 1090 SYSTEMS) VIA THE <DTE20.  ^PRESENTLY, THIS INCLUDES
THE <KL ^FRONT ^END (<RSX20F) AND THE <DN87S IN <TOPS-10 6.03.
.B 1
<DTELDR WILL RUN ONLY ON 6.03 AND IS REQUIRED TO RUN ON ALL 1080 OR 1090 SYSTEMS.
.B 3
2.0##<EXTERNAL <CHANGES
.B 1
^AS <DTELDR IS AN ENTIRELY NEW PROGRAM, THE <HELP FILE IS REPRODUCED HERE IN ITS ENTIRITY.
.B 1
<DTELDR IS A PROGRAM TO DUMP AND BOOTSTRAP FRONT ENDS CONNECTED
TO THE <KL10 VIA A <DTE20.  ^COMMAND FORMAT IS:
.B 1;.LM 0
<*DEV:FILE.EXT[P,PN,SFD,SFD,. .]/<SWITCH/SWITCH
.B 1;.I 5
OR
.B 1
<*/SWITCH/SWITCH
.B 1
<DEV:FILE.EXT[P,PN,SFD,SFD, . .] IS THE FILE SPECIFICATION FOR
THE FILE TO LOAD INTO THE -11.  ^DEFAULT IS <DSK:DTEL_<X>_<Y>.BIN, WHERE
_<<X> IS THE <CPU NUMBER (ONLY 0 ALLOWED IN CURRENT IMPLEMENTATION)
AND _<<Y> IS THE <DTE NUMBER (0,1,2 OR 3).  ^THIS SPECIFICATION IS ONLY
MEANINGFUL IF THE -11 IS LOADED OVER THE <DTE20.  (^SEE </SWITCH)
.B 1
^DUMPS ARE WRITTEN OUT TO <DSK:DTED_<X>_<Y>.BIN,
<.B00, <.B01, ETC.  ^USING PATH OF JOB THAT RUNS <DTELDR.
.B 1
^ACTION SWITCHES:##(_<<FE_#> INDICATES FRONT END NUMBER, _<<CPU_#>_<DTE_# FROM 0-3>
.B 1
</AUTOMATIC - AUTOMATICALLY RELOAD FRONT ENDS THAT CRASH
.BR
</HELP - TYPE THIS TEXT
.BR
</TERMINATE:_<FE_#> - SHUT DOWN SPECIFIED FRONT END
.BR
</RELOAD:_<FE_#> - RELOAD SPECIFIED FRONT END AND START PRIMARY PROTOCOL
.BR
</INITIALIZE:_<FE_#> - START PRIMARY PROTOCOL ON SPECIFIED FRONT END
.B 1
^MODIFICATION ^SWITCHES:
.B 1
</IMAGE - <.BIN FILE IS IN IMAGE FORMAT
.BR
</NODUMP - DO NOT DO DUMP OF -11 CORE
.BR
</SELECT:_<10,11> - SELECT PLACE TO RELOAD -11 FROM
.BR
</SWITCH:_<VALUE> - USE OCTAL _<<VALUE> INSTEAD OF OLD -11 SWITCH VALUE
.BR
</NOLOG - SUPPRESS ERROR LOGGING
.B 1
^A <DUMP FILE SPECIFICATION MAY BE GIVEN FOR </AUTOMATIC.
^THE SWITCHES </NOLOG, </NODUMP, AND </SWITCH MAY ALSO
BE SPECIFIED WITH </AUTOMATIC.
.B 1
</SELECT:10 RELOADS THE FRONT END OVER THE <DTE20 FROM THE
RELOAD FILE SPECIFICATION.  </SELECT:11 RELOADS THE FRONT END
FROM THE -11 DEVICE SPECIFIED IN </SWITCH, OR FROM THE ORIGINAL
-11 LOAD DEVICE IF </SWITCH IS NOT SPECIFIED.
.B 1
^IF </SELECT IS NOT GIVEN, DEFAULT IS "11" IF THE -11 IS THE MASTER,
"10" OTHERWISE.
.B 1
</TERMINATE AND </INITIALIZE MUST NOT APPEAR WITH ANY OTHER SWITCHES.
.B 1
</SWITCH IS USED WHEN THE RELOAD SOURCE IS THE -10 TO TELL THE <ROM
WHICH -11 DEVICE TO OBTAIN THE RELOAD FILE FROM.  <RSX20 ALSO
USES THE SWITCH SETTING TO DETERMINE WHETHER TO ENTER <KLINIT OR NOT.
.B 1
^MASKS FOR ^VALUES:
.B 1;.LM 5
3400 - UNIT NUMBER FIELD
.BR
#200 - ^IF ONE, USE <RP04.  ^OTHERWISE, USE ^FLOPPY OR <DEC<TAPE,
.BR
#######IN THAT ORDER (WITH <BM873-YH <ROM)
.BR
###7 - <KLINIT ^FIELD
.BR
######0 - ^IGNORE ^SWITCHES
.BR
######1 - ^ENTER <KLINIT, GIVE DEFAULT ANSWERS TO QUESTIONS
.BR
######3 - ^DO NOT ENTER <KLINIT
.BR
######5 - ^SAME AS 3
.BR
######7 - ^ENTER <KLINIT DIALOG
.B 3;.LM 0;.F;.J
3.0##<KNOWN <BUGS <AND <DEFICIENCIES
.B 1
^THERE ARE NO KNOWN BUGS OR DEFICIENCIES IN THIS VERSION.
.B 3
4.0##<INSTALLATION <INSTRUCTIONS
.B 1
^THE <DTELDR PACKAGE CONTAINS THE FOLLOWING FILES:
.B 1;.LM 5;.NF;.NJ
^^DTE1.RND
DTELDR.HLP
DTELDR.MAC
DTELDR.CTL
DTELDR.EXE\\
.B 1;.LM 0;.F;.J
^SINCE <DTELDR ONLY WORKS ON A 1080 OR 1090 SYSTEM THERE IS NO NEED
TO INSTALL IT ON OTHER SYSTEMS. ^FOR SYSTEMS THAT NEED <DTELDR, ITS .<EXE
FILE SHOULD BE PUT ON <SYS: AND THE .<HLP ON HLP:. ^SYSTEMS THAT
DO NOT HAVE A <DN87S SHOULD ADD THE FOLLOWING TO
<OPR.ATO TO PROVIDE FOR THE AUTOMATIC RELOADING OF THE CONSOLE
FRONT END PROCESSOR.
.PG.I5
:<SLOG
.I5
:<DEF <DTE=
.I5
<DTE-R <DTELDR
.I5
<DTE-/AUTO
.B1
^SYSTEMS WITH <DN87S<'S MUST ALSO ADD <INITIALIZE SWITCHES FOR THE
<DTE<'S THEY ARE CONNECTED TO.
^FOR EXAMPLE, A SITE WITH 2 <DN87S<'S,
ONE ON <DTE _#1 AND THE OTHER ON <DTE _#2 SHOULD HAVE IN THEIR <OPR.ATO
:
.B1.I5
:<SLOG
.I5
:<DEF <DTE=
.I5
<DTE-R <DTELDR
.I5
<DTE-/INIT:1
.I5
<DTE-/INIT:2
.I5
<DTE-/AUTO
.B 3
5.0##<INTERNAL <CHANGES
.B 1
^AS <DTELDR IS NEWLY RELEASED, THIS SECTION IS NOT APPLICABLE.
.B 3
6.0##<SUGGESTIONS
.B 1
^NONE.
.B 3
[^END OF <DTE1.DOC]