Trailing-Edge
-
PDP-10 Archives
-
de-10-omona-v-mc9
-
mongen.mac
There are 17 other files named mongen.mac in the archive. Click here to see a list.
TITLE MONGEN - PROGRAM TO DEFINE MONITOR, TTY AND REMOTE CONFIGURATIONS - V1050
SUBTTL T. HASTINGS/TH/EP/DAL 22 AUG 78
EDITNO==136 ;EDIT NO.
VERSION==050 ;MAJOR VERSION NO.
VMINOR==1 ;MINOR VERSION NUMBER
VWHO==0 ;WHO LAST EDITED
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1970,1974,1978 BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
JOBVER==137 ;LOC OF VERSION NO IN JOB DATA AREA
LOC JOBVER
BYTE (3)VWHO(9)VERSION(6)VMINOR(18)EDITNO ;VERSION NUMBER
RELOC
;SYMBOLS WHICH ARE PARAMETERS OF MONGEN ITSELF(PREFIX MP)
IFNDEF MP.MVN,<MP.MVN==^D603> ;MONITOR VERSION NUMBER
;WHICH THIS MONGEN IS DESIGNED TO GENERATE
;OTHER MONGEN VERSIONS GENERATE OTHER MONITOR VERSIONS
IFNDEF MP.PDL,<MP.PDL==40> ;PD LIST LENGTH
IFNDEF MP.AMX,<MP.AMX==^D10> ;MAX NO. OF ANSWERS INSIDE PARENS
IFNDEF MP.SMX,<MP.SMX==^D7> ;MAX SYSTEM SUPPORTED IN 6.03
; 1040=0, 1050=1,1055=2,1070=3,1077=4
IFNDEF MP.LMX,<MP.LMX==^D80> ;MAX. NO. OF CHAR ALLOWED IN INPUT LINE
; NOT COUNTING EOL OR NULL
IFNDEF MP.FTA,<MP.FTA==^D25> ;MAX NUMBER OF FEATURE TEST SWITCHES THAT MAY BE ADDED
COMMENT "
ASSEMBLY INSTRUCTIONS:
.COMPIL MONGEN
LOADING INSTRUCTIONS:
.LOAD MONGEN
DEBUGGING INSTRUCTION:
.DEBUG MONGEN
BY DEPOSITING NON-ZERO IN LOCATION DEBUG WITH DDT, MONGEN WILL
OUTPUT ALL FILE STUFF TO TTY TOO INSIDE <>.
"
;MONGEN IS A DIALOG PROGRAM(ACTUALLY 4 PROGRAMS IN ONE) WHICH
;ASKS THE CUSTOMER QUESTIONS ABOUT HIS CONFIGURATION.
;THE RESULTS OF THIS DIALOG ARE OUTPUT AS A FILE OF PARAMETER ASSIGNMENTS
;WHICH CAUSE CONDITIONAL ASSEMBLY IN THE DATA BASE MODULES OF THE MONITOR.
;THUS EACH CUSTOMER IS ABLE TO CUSTOM-MAKE HIS MONITOR FOR THE FEATURES
;HE WISHES DEPENDING ON HARDWARE AND SOFTWARE REQUIREMENTS.
;THESE PARAMETER ASSIGNMENTS TAKE THE FORM OF MACRO CALLS USING
; THE XP MACRO OF TWO ARGUMENTS AS DEFINED IN FILE S.MAC. THE XP
; MACRO DEFINES THE FIRST SYMBOL TO BE EQUAL TO THE SECOND EXPRESSION
; AND DECLARES THE SYMBOL TO BE INTERNAL AND DDT OUTPUT SUPPRESSED.
;USER INSTRUCTIONS FOR RUNNING MONGEN:
;MONGEN WILL ASK YOU QUESTIONS ABOUT YOUR CONFIGURATION AND
; OUTPUT THEM IN A FILE. TO HELP YOU ANSWER THESE QUESTIONS,
; MONGEN GIVES THREE LEVELS OF
; GUIDANCE. SHORT MODE FOR THE VERY EXPERIENCED, PROMPT MODE
; WHERE YOU ARE GIVEN CHOICES, AND LONG MODE WHERE YOU
; ARE GIVEN THE CHOICES ALONG WITH AN EXPLANATION. YOU MAY CHANGE
; THE MODE FOR A SINGLE QUESTION IF YOU DO NOT UNDERSTAND IT BY SIMPLY TYPING /H
; TO CHANGE THE MODE FOR THE REST OF THE QUESTIONS, TYPE /HELP:X
; WHERE X IS SHORT, PROMPT, OR LONG. ACTUALLY MONGEN ALWAYS
; ALLOWS ABBREVIATIONS EVERYWHERE, SO S, P, AND L SUFFICE
; ALONG WITH H FOR HELP.
; QUESTIONS ASKING FOR A NUMBER(DECIMAL UNLESS SPECIFICALLY NOTED
; AS OCTAL) ALWAYS INDICATE THE RANGE INSIDE PARENS, IE (MIN-MAX).
; OTHER QUESTIONS ARE ASKING FOR ONE
; OF A LIST OF CHOICES. THE CHOICES ARE LISTED INSIDE PARENS.
; STILL OTHER QUESTIONS ASK
; FOR Y OR N AND STILL OTHERS ASK FOR JUST A STRING.
; IN ALL QUESTIONS WHICH HAVE PROMPTING INSIDE PARENS, THE FIRST
; ITEM IN THE LIST IS CALLED THE DEFAULT AND IS ASSUMED IF YOU
; ANSWER JUST WITH CARRIAGE RETURN. ALL THE YES/NO QUESTIONS
; HAVE PROMPTING OF (Y,N) SO CARRIAGE RETURN ALWAYS MEANS Y.
; (,ANS0,ANS1,...) MEANS NO DEFAULT ASSUMED ON JUST CR
; CALLER OF ASK ROUTINE MUST CHECK FOR N=0 IN THIS CASE AND TAKE
; APPROPRIATE ACTION. (THIS FEATURE IS USED BY HELP ITSELF TO ALLOW
; JUST CR TO MEAN NEXT LONGER HELP MODE).
;RULE: ALL SYMBOLS ARE GENERATED ALL OF THE TIME,
; NO MATTER HOW DIALOG BRANCHES. WHY? SO USERS READING THE
; DATA BASE MODULES NEVER NEED TO LOOK AT MONGEN TO UNDERSTAND
; THE MONITOR.
;THE ONLY LOCAL STORAGE IN MONGEN IS USED TO STORE ANSWERS IF THE
; VALUES ARE NEEDED LATER FOR ERROR CHECKING. MOST ANSWERS ARE OUTPUT
; IMMEDIATELY AND SO ARE NEVER STORED IN MEMORY. BY CONVENTION THE NAMES
; OF VARIABLES WARE THE SAME AS THE ASSOCIATED SYMBOLS OUTPUT IN
; THE FILE. OUTPUT SYMBOLS ALL START WITH THE TWO LETTERS "M." OR "FT" THIS MAKES
; IT EASY TO RECOGNIZE SYMBOLS DEFINED BY MONGEN WHEN READING THE REST
; OF THE MONITOR.
;MONGEN IS STUPID AND SIMPLE MINDED. IS KNOWS AS LITTLE ABOUT
; THE MONITOR AS POSSIBLE. IT NEVER ADDS TWO ANSWERS TOGETHER, FOR EXAMPLE.
; IT ALWAYS GENERATES ALL SYMBOLS ALL THE TIME, NO MATTER
; HOW THE QUESTIONS ARE ANSWERED. IT IS UP TO COMMON TO TAKE THE RAW DATA
; AND PERFORM COMPUTATION AND DEFINE NEW AND CONVENIENT SYMBOLS.
;THE FOLLOWING MACROS(AND SUBROUTINES BY THE SAME NAME) ARE USED TO ASK
; CUSTOMER QUESTIONS AND GET HIS ANSWERS:
;SOME ANSWERS ARE NUMERIC, WHILE OTHERS ARE CHOICES LIKE Y OR N
; OR AN ITEM OUT OF A LIST. ALL ANSWERS ARE CHECKED FOR REASONABLENESS.
; THE GOAL IS TO PREVENT AS MANY ERRORS AS POSSIBLE, SINCE ERRORS
; ARE NOT USUALLY DISCOVERED UNTIL THE MONITOR IS LOADED AND SOMETIMES
; EVEN THEN IT IS HARD TO FIND THE PROBLEM. ALL NUMERIC ANSWERS ARE
; CHECKED FOR MIN AND MAX AS INDICATED INSIDE PARENS WITH A -
; SEPARATING THE MIN AND MAX. IF A NUMERIC QUESTION
; DOES NOT HAVE A RANGE SPECIFIED, MONGEN WILL PRINT
; ? INTERNAL MONGEN ERROR - ABOVE QUESTION MUST HAVE (...,MIN-MAX) -
; EDIT MONGEN.
; AND EXIT. NOTE: (MIN-?) IS OK TO MEAN NO UPPER BOUND
; THE PROGRAMMER MUST EDIT MONGEN TO FIX HIS BUG.
; THE CUSTOMER SHOULD NEVER SEE THIS MESSAGE, SINCE IT IS A DEBUGGING
; AID AND SHOULD BE CAUGHT DURING TESTING.
;EACH MACRO HAS A TEXT QUESTION AS AN ARGUMENT. THE ANSWER IS RETURNED
; IN AC N. IF AN ERROR IS DETECTED, THE QUESTION IS
; REASKED AT NEXT HIGHER LEVEL OF VERBOSITY. RETURN IS ALWAYS WITH
; A SUCCESSFUL VALUE. THE CUSTOMER MAY HAVE CHANGED LEVELS OF VERBOSITY
; USING THE /HELP: FEATURE. LOCATION SAVLV HAS CURRENT PERMANENT LEVEL,
; WHILE LEVEL FOR CURRENT QUESTION IS KEPT IN AC LV.
;ASKYN - ANSWER Y OR N, (Y=1, N=0) NOTE: OPPOSITE FROM ASKLST
; HOWEVER MORE USEFUL, SINCE CAN OUTPUT DIRECTLY IN XP MACRO
; WHERE XP SYMBOL,1 MEANS Y AND XP SYMBOL,0 MEANS N.
; (Y,N) MUST APPEAR IN QUESTION AS A PROMPT. FOR CONSISTENCY
; THE Y MUST BE BEFORE THE N SO CR ALWAYS MEANS Y.
;ASKDEC - ANSWER DECIMAL NUMBER. QUESTION SHOULD HAVE (DEFAULT,MIN-MAX).
; IF NO DEFAULT IS REASONABLE(SUCH AS NUMBER OF JOBS), ONLY
; (MIN-MAX) IS REQUIRED.
;ASKOCT - ANSWER OCTAL NUMBER. QUESTION SHOULD HAVE (DEFAULT,MIN-MAX)
; IF NO DEFAULT IS REASONABLE, ONLY (MIN-MAX) IS REQUIRED.
;ASKLIN - ANSWER OCTAL LINE NUMBER OR CTY
;ASKSTR - ANSWER ARBITRARY STRING. STORED IN ASCSTR AS ASCIZ.
; N=NO. OF CHARS IN STRING NOT COUNTING NULL OR CRLF.
;ASKLST - ANSWER ONE OF THE ITEMS IN THE PROMPTING LIST IN PARENS.
; N=0,1,2,... IE POSITION OF ANSWER IN LIST. IF ANSWER IS NOT
; IN LIST OR ABBREVIATION IS NOT UNIQUE, THE QUESTION IS REASKED
; AT HIGHER LEVEL OF VERBOSITY. ERROR MESSAGES ARE:
; ? TYPE ENOUGH TO UNIQUELY DISTINGUISH ANSWER
; ? ANSWER WITH ONE OF THE CHOICES INSIDE ( )
; ? INTERNAL MONGEN ERROR - NO "(" IN ABOVE MESSAGE -
; EDIT MONGEN AND ADD (ANS0,ANS1,...)
; ? INTERNAL MONGEN ERROR - TOO MANY POSSIBLE ANSWERS ABOVE -
; EDIT MONGEN AND INCREASE MP.AMX
;TO ASK A MULTIPLE LINE QUESTION, THE FOLLOWING SPECIAL MACROS:
;ASKMN - ANSWER M OR M,N WHERE M AND N ARE OCTAL LINE
; NUMBERS OR JUST CTY
;ASKMNP - ANSWER M,P OR M-N,P WHERE M,N, AND P ARE OCTAL LINE NUMBERS
;
;ASKTMN - ANSWER M OR M,N OR ALL FOR 7 TRACK TAPE UNITS
;
;ASKTMN - ANSWER M OR M,N OR ALL FOR 7 TRACK TAPE UNITS
;TO OUTPUT TO TTY, FILE OR BOTH, USE THE FOLLOWING:
; USUAL FILE OUTPUT RADIX IS OCTAL, WHILE TTY OUTPUT RADIX IS DECIMAL,
; UNLESS NAME HAS OCT OR DEC IN IT, IN WHICH THE RADICES ARE THE SAME.
;BTHOUT - OUTPUT DECIMAL TO BOTH TTY AND FILE, FILE AS A COMMENT(IE ; INSERTED)
;BTHOCT - OUTPUT OCTAL TO BOTH TTY AND FILE, FILE AS A COMMENT
;FILEOUT - OUTPUT TO FIL ONLY
;FILCOM - OUTPUT TO FILE ONLY AS A MULTI-LINE COMMENT(IE ; INSERTED)
;TTYOUT - OUTPUT TO TTY ONLY(DECIMAL)(USUAL)
;TTYOCT - OUTPUT TO TTY ONLY(OCTAL)(UNUSUAL)
;FILSTR - OUTPUT STRING IN ASCSTR TO FILE
;FILDEC - OUTPUT TO FILE WITH RADIX DECIMAL INSTEAD OF OCTAL
;FILDC2 - OUTPUT TO FILE WITH RADIX DECIMAL, AT LEAST 2 CHARS
;ALL OF THE ABOVE MACROS(AND SUBROUTINES) CAN HAVE A SECOND
; ARGUMENT WHICH IS THE LOCATION OF A VALUE TO BE SUBSTITUTED FOR * IN
; THE FIRST ARGUMENT. THE VALUE CAN BE LEFT JUSTIFIED SIXBIT OR A NUMBER.
; IF THE LOCATION OF THE VALUE IS AC N, NO EXTRA INSTRUCTION IS GENERATED
; SINCE THE MACRO USUALLY PICKS UP THE LOCATION AND PUTS IT IN N.
; HOWEVER IT IS RECOMENDED THAT N BE INCLUDED AS THE SECOND ARGUMENT
; TO INDICATE TO THE READER THAT A SUBSTITION IS GOING TO TAKE PLACE USING N.
; ELSE NEW CODE MAY BE INTRODUCED WHICH USES N BEFORE THE MACRO CALL.
; WHENEVER THE CHARACTER @ IS SEEN IT IS CONVERTED TO CRLF. THIS
; MAKES IT NICER FOR FORMATTING THE MESSAGES INSIDE <>, SINCE
; THE > CAN ALWAYS BE ON THE SAME LINE, EVEN WHEN CRLF IS WANTED.
;EXAMPLE:
; ASKYN <LPT(Y,N)[LINE PRINTER AT STATION *]>,OSN
; FILOUT <MACRLP *@>,N
;ALL SUBROUTINES WHICH IMPLEMENT THE MACROS HAVE THE SAME CALLING
; SEQUENCE:
;CALL: MOVE LV,QUESTION LEVEL -1 FOR SHORT, 0 FOR PROMPT, 1 FOR LONG
; MOVE N,+NUMBER OR LEFT JUSTFIED SIXBIT TO BE
; ; SUBSTITUTED FOR *
; MOVEI T1,ADR OF ASCIZ MESSAGE
; PUSHJ P,ASKXXX OR FILXXX OR TTYXXX OR BTHXXX
; ALWAYS RETURN WITH ANSWER IN N( AND STRING IN ASCSTR) OR
; ORIGINAL CONTENTS OF N IF JUST OUTPUT ROUTINE.
;THE FGEN DIALOGUE MAKES USE OF AN AUXILIARY HELP FILE SYS:FGEN.HLP
;TO EXPLAIN THE USE OF FEATURE TEST SWITCHES AND TO INCLUDE COMMENTS
;IN THE OUTPUT FILE. THE FILE MUST BE IN THE FORM
;<TERMINATOR> <SWITCH> <TAB> <TEXT> <TERMINATOR>
;THE TERMINATOR IS DETERMINED BY SYMBOL C.TMFH AND IS CURRENTLY
;<CONTROL> A. IT MUST BE ONE CHARACTER.
;THE TEXT WILL BE COPIED FROM AFTER THE TAB TO THE NEXT TERMINATOR,
;SO IT SHOULD BE CONSTRUCTED CAREFULLY. NOTE PARTICULARLY THAT SINCE TO
;POSITION THE FILE THE CODE FIRST FINDS A TERMINATOR AND THEN READS TO
;A TERMINATOR IT WILL BE MORE EFFICIENT IF EACH SWITCH IS PRECEEDED BY
;TWO TERMINATORS.
;MACRO FHLPOS IS PROVIDED TO HELP POSITION THE HELP FILE.
; FHLPOS STRING,TAG POSITIONS THE FILE TO THE TEXT AFTER "STRING",
;AND TRANSFERS TO "TAG" IF THE STRING CANT BE FOUND. IF THE STRING
;HAS BEEN COMPUTED, IT SHOULD BE SIXBIT CHARACTERS LEFT JUSTIFIED IN
;ACCUMULATOR WD, AND THE FIRST ARGUMENT SHOULD BE *, E.G.
; FHLPOS *,ERROR
;FHLPOA IS THE SAME EXCEPT IT DOES NOT LOOK FOR A TAB AFTER THE TEXT
;SUBROUTINES HAVE BEEN PROVIDED TO COPY THE TEXT FROM THE HELP
;FILE TO THE OUTPUT FILE OR TTY.
;FHLPTT - COPIES TEXT FROM THE CURRENT POSITION OF THE HELP FILE TO
;THE NEXT TERMINATOR TO TTY
;FHLPFL - COPIES TEXT FROM THE CURRENT POSITION TO THE NEXT TERMINATOR
;TO THE OUTPUT FILE
;FHLPFC - COPIES TEXT FROM THE CURRENT POSITION TO THE NEXT TERMINATOR
;TO THE OUTPUT FILE AS A COMMENT, I.E. WITH A ; AT THE BEGINNING OF EACH LINE
;SOME CONVENTIONS:
;ALL SINGLE LINE ANSWERS ARE ANSWERED ON THE SAME LINE AS QUESTIONS.
; THIS SAVES PAPER. THE FORMAT IS QUESTION(WITHOUT QUESTION MARK)
; FOLLOWED BY COLON AND ONE SPACE.
;ONLY THE ASK MACROS ADD ANY CHARACTERS TO THE TEXT IN THE FIRST
; ARGUMENT. THE BEGINNING OF THE MESSAGE IS INSERTED AN "; " AS
; A COMMENT FOR THE FIL, AND ": " IS APPENDED TO THE END
; OF THE QUESTION SO THAT ALL QUESTIONS LOOK ALIKE. NONE OF THE
; OUTPUT ONLY MACROS ADD ANY SPECIAL CHARACTERS.
;BY CONVENTION PROMPTING IN () APPEARS BEFORE LONG DIALOG IN [].
; THUS A USER CAN TYPE ^O IF THE USER GETS BORED, AND GET THE MOST USEFUL
; OUTPUT FIRST.
;IF JUST A CR IS GIVEN TO A QUESTION WHICH HAS A LIST, THE FIRST
; ITEM IS ASSUMED. THIS IS TRUE FOR DECIMAL AND OCTAL QUESTIONS TOO.
;ALL NUMERIC QUESTIONS MUST HAVE A RANGE SUPPLIED.
; IF ONE IS NOT, THE USER GETS:
; ? INTERNAL MONGEN ERROR - NO (...,MIN-MAX) IN ABOVE QUESTION -
; EDIT MONGEN AND INCLUDE IN QUESTION.
;ALL ERRORS WHICH ARE MONGEN'S RATHER THAN THE CUSTOMER'S, ARE PRECEDED
; WITH ? INTERNAL MONGEN ERROR - FOLLOWED BY THE PROBLEM AND WHAT
; THE PROGRAMMER SHOULD DO TO FIX MONGEN. NOTE THAT
; THE CUSTOMER SHOULD NEVER SEE THESE, SINCE THEY ARE DEBUGGING AIDS.
;ALL ERROR MESSAGES START WITH "? ". THE SPACE FOLLOWING ? MAKES THEM
; DISTINGUISHABLE FROM MONITOR ERRORS WHICH HAVE NO SPACE.
;ALL STRINGS ARE ASCIZ INCLUDING AS INPUT FROM TTY.
; ALL EOL CHARS(CR,LF,FF,VT,ESC,ALT1,ALT2,^Z,^C) ARE STRIPPED OUT
; AND ARE REPLACED BY A NULL. THIS MAKES IT EASY TO SCAN STRINGS
; SINCE END IS ALWAYS DETECTED BY JUMPE CH,
; OUTPUT TO FILE MUST PUT CRLF BACK IN EXPLICITLY BY USING
; @ OR FCRLF ROUTINE. THIS MAKES OUTPUT FILE MORE INDEPENDENT FROM
; USER INPUT.
;TO HELP THE READER OF MONGEN:
; ALL JUMPS ARE DOWN THE PAGE, EXCEPT LOOPS
; MOST PUSHJ ARE TO ROUTINES DOWN THE PAGE
;DEFINE THE MACROS:
; THE FOLLOWING MACROS SUFFIX ": " TO ASK QUESTION
; AND GET ANSWER ON SAME LINE
DEFINE CAL (XXX,A,B,%C)<
XLIST ;;ALWAYS TURN OFF LISTING
IFNB <B>,<IFDIF <B> <N>,<MOVE N,B>> ;;PICK UP VALUE TO BE SUBSTITUTED FOR *
JSP T1,%C ;;SETUP T1 WITH MESSAGE ADR AND JUMP AROUND
;; MESSAGE WHICH MAY BE TOO BIG TO FIT
;; IN REMOTE LITERAL.
ASCIZ \A: \ ;;THE QUESTION WITH ": "
INTERN XXX ;;DECLARE INTERN SO MACRO WILL NOT THINK XXX A MACRO
%C:! PUSHJ P,XXX ;;CALL THE SUBROUTINE XXX
IFE RJRSTF,<LIST> ;;TURN LISTING BACK ON UNLESS INSIDE RJRST MACRO
>
DEFINE ASKYN (A,B)<
CAL ASKYN,<A>,B>
DEFINE ASKDEC (A,B)<
CAL ASKDEC,<A>,B>
DEFINE ASKOCT (A,B)<
CAL ASKOCT,<A>,B>
DEFINE ASKLIN (A,B)<
CAL ASKLIN,<A>,B>
DEFINE ASKSTR (A,B)<
CAL ASKSTR,<A>,B>
DEFINE ASKLST (A,B)<
CAL ASKLST,<A>,B>
;THE FOLLOWING MACROS DO NOT HAVE ANY CHARACTERS ADDED TO QUESTION
DEFINE CAL2 (XXX,A,B,%C)<
XLIST ;;ALWAYS TURN OFF LISTING
IFNB <B>,<IFDIF <B> <N>,<MOVE N,B>> ;;PICKUP VALUE TO BE SUBSTITUTED FOR *
JSP T1,%C ;;SETUP T1 WITH MESSAGE ADR AND JUMP AROUND
;; MESSAGE WHICH MAY BE TOO LONG FOR MACRO
;; REMOTE LITERAL TABLE(14 WORDS)
ASCIZ \A\ ;;THE QUESTION WITH NO ADDED CHARACTERS
INTERN XXX ;;DECLARE INTERN SO MACRO WILL NOT THINK XXX A MACRO
%C:! PUSHJ P,XXX ;;CALL THE SUBROUTINE TO JUST OUTPUT
IFE RJRSTF,<LIST> ;;TURN LISTING BACK ON UNLESS INSIDE RJRST MACRO
>
;OUTPUT IMMEDIATE VALUE
DEFINE CAL3 (XXX,A,B,%C)<
XLIST ;;ALWAYS TURN OFF LISTING
IFNB <B>,<IFDIF <B> <N>,<MOVEI N,B>> ;;PICKUP VALUE TO BE SUBSTITUTED FOR *
JSP T1,%C ;;SETUP T1 WITH MESSAGE ADR AND JUMP AROUND
;; MESSAGE WHICH MAY BE TOO LONG FOR MACRO
;; REMOTE LITERAL TABLE(14 WORDS)
ASCIZ \A\ ;;THE QUESTION WITH NO ADDED CHARACTERS
INTERN XXX ;;DECLARE INTERN SO MACRO WILL NOT THINK XXX A MACRO
%C:! PUSHJ P,XXX ;;CALL THE SUBROUTINE TO JUST OUTPUT
IFE RJRSTF,<LIST> ;;TURN LISTING BACK ON UNLESS INSIDE RJRST MACRO
>
DEFINE ASKMN (A,B)<
CAL2 ASKMN,<A>,B>
DEFINE ASKMNP (A,B)<
CAL2 ASKMNP,<A>,B>
DEFINE ASKTMN (A,B)<
CAL2 ASKTMN,<A>,B>
DEFINE BTHOUT (A,B)<
CAL2 BTHOUT,<A>,B>
DEFINE BTHOCT (A,B)<
CAL2 BTHOCT,<A>,B>
DEFINE FILOUT (A,B)<
CAL2 FILOUT,<A>,B>
DEFINE FILCOM (A,B)<
CAL2 FILCOM,<A>,B>
DEFINE FILOUD (A,B)<
CAL3 FILOUT,<A>,B>
DEFINE TTYOUT (A,B)<
CAL2 TTYOUT,<A>,B
>
DEFINE TTYOCT (A,B)<
CAL2 TTYOCT,<A>,B>
DEFINE FILSTR (A,B)<
CAL2 FILSTR,<A>,B>
DEFINE FILDEC (A,B)<
CAL2 FILDEC,<A>,B>
DEFINE FILDC2 (A,B)<
CAL2 FILDC2,<A>,B>
DEFINE EREXIT (A,B)<
CAL2 EREXIT,<A>,B>
DEFINE FHLPOS (A,B)<
XLIST
IFB <A>,<PRINTX FHLPOS MACRO MAY CLOBBER WD>
IFB <B>,<PRINTX FHLPOS MACRO MAY CLOBBER WD>
IFDIF <A>,<*>,<
MOVE WD,[SIXBIT \A\]
>
INTERN FHLPOS
PUSHJ P,FHLPOS
JRST B
LIST
>
DEFINE FHLPOA (A,B)<
XLIST
IFB <A>,<PRINTX FHLPOA MACRO MAY CLOBBER WD>
IFB <B>,<PRINTX FHLPOA MACRO MAY CLOBBER WD>
IFDIF <A>,<*>,<
MOVE WD,[SIXBIT \A\]
>
INTERN FHLPOA
PUSHJ P,FHLPOA
JRST B
LIST
>
;DEFINE REMOTE MACROS WHICH ARE JUMPED TO ON UNUSUAL CASES
; INCLUDE CODE IN-LINE SO READABLE, BUT INDENT 2 TABS, JUST AS
; IF MULTI-LINE LITERAL.
;USED INSTEAD OF MULTI-LINE LITERAL BECAUSE MACRO LISTS
; SOURCE INSIDE OF MACROS INSIDE OF LITERALS
DEFINE RJRST (A,%B)<
XLIST ;;TURN OFF LISTING SOURCE IN EXPANSION
RJRSTF==1 ;;FLAG INSIDE OF RJRST, SO CAL MACRO
;; WILL NOT TURN LIST BACK ON
SKIPA ;;ALLOW MACRO IN ERROR RETURN OR AFTER TEST INSTR.
JRST %B ;;BY PASS UNUSUAL CODE
A ;;THE UNUSAL CODE
RJRSTF==0 ;;FLAG NO LONGER INSIDE RJRST MACRO
;; SO FUTURE CAL MACROS WILL TURN LIST ON
%B:! LIST ;;TURN LISTING BACK ON
>
DEFINE RJUMPE (AC,A,%B)<
XLIST
RJRSTF==1 ;;FLAG INSIDE OF RJRST, SO CAL MACRO
;; WILL NOT TURN LIST BACK ON
SKIPE AC ;;CONDITION OF UNUSUAL CODE?
JRST %B ;;NO, BY PASS UNUSUAL CODE
A ;;THE UNUSUAL CODE
RJRSTF==0 ;;FLAG NO LONGER INSIDE RJRST MACRO
;; SO FUTURE CAL MACROS WILL TURN LIST ON
%B:! LIST ;;TURN LISTING BACK ON
>
DEFINE RJUMPL (AC,A,%B)<
XLIST
RJRSTF==1 ;;FLAG INSIDE OF RJRST, SO CAL MACRO
;; WILL NOT TURN LIST BACK ON
SKIPL AC ;;CONDITION OF UNUSUAL CODE?
JRST %B ;;NO, BY PASS UNUSUAL CODE
A ;;THE UNUSUAL CODE
RJRSTF==0 ;;FLAG NO LONGER INSIDE RJRST MACRO
;; SO FUTURE CAL MACROS WILL TURN LIST ON
%B:! LIST
>
DEFINE RJUMPN (AC,A,%B)<
XLIST
RJRSTF==1 ;;FLAG INSIDE OF RJRST, SO CAL MACRO
;; WILL NOT TURN LIST BACK ON
SKIPN AC ;;CONDITION OF UNUSUAL CODE?
JRST %B ;;NO, BY PASS UNUSUAL CODE
A ;;THE UNUSUAL CODE
RJRSTF==0 ;;FLAG NO LONGER INSIDE RJRST MACRO
;; SO FUTURE CAL MACROS WILL TURN LIST ON
%B:! LIST
>
DEFINE RJUMPGE (AC,A,%B)<
XLIST
RJRSTF==1 ;;FLAG INSIDE OF RJRST, SO CAL MACRO
;; WILL NOT TURN LIST BACK ON
SKIPGE AC ;;CONDITION OF UNUSUAL CODE?
JRST %B ;;NO, BY PASS UNUSUAL CODE
A ;;THE UNUSUAL CODE
RJRSTF==0 ;;FLAG NO LONGER INSIDE RJRST MACRO
;; SO FUTURE CAL MACROS WILL TURN LIST ON
%B:! LIST
>
RJRSTF==0 ;START FLAG AT 0 MEANING NOT INSIDE RJRST
;PARAMETERS:
;ACS
F=0 ;FLAGS
;LH(DEFINED AS 36 BIT QUANTITIES):
F.MTCH==1B0 ;MATCH FOUND IN FNDASK ROUTINE
F.OFO==1B1 ;OUTPUT FILE OPEN. FILE CALLS IGNORED IF 0
; NEEDED SO ASK ROUTINES CAN BE USED TO ASK ABOUT FILE NAME
F.TF==1B2 ;TTY/FIL FLAG, 1 ON FIRST CHAR TO FILE
; USED FOR DEBUG FEATURE TO PRINT <> ON TTY
; SET BY TTYPUT ROUTINE, CLEARED BY FILPUT ROUTINE
F.CTY==1B3 ;CTY IS AN ACCEPTABLE OCTAL NUUMBER IF 1
; SET BY ASKLIN, CLEARED BY ASKDEC,ASKOCT,ASKNUM ROUTINES
F.FLF==1B4 ;LAST CHAR ON FILE WAS LINE FEED
; USED TO PRECEDE NEXT CHAR WITH ; TO MAKE A COMMENT IN FILE
; IF F.COM IS ALSO ON. SET, CLEARED AND LOOKED AT BY FILPUT ONLY
F.COM==1B5 ;MAKE ALL LINES TO FILE BE COMMENT IF THIS FLAG IS ON
; USES F.FLF TO KNOW WHEN TO PUT ; OUT
; SET AND CLEARED BY FILCOM AND TTYIN ROUTINES ONLY
; LOKED AB BY FILPUT ROUTINE
F.LPAR==1B6 ;LEFT PAREN SEEN BY TTYOUT IN TTY OUTPUT STREAM.
; USED TO SUPPRESS PROMPTING IF IN SHORT HELP MODE
; CLEARED WHEN RIGHT PAREN SEEN. SET, CLEARED,
; AND USED BY TTYOUT ROUTINE ONLY.
F.LBRK==1B7 ;LEFT BRACKET SEEN BY TTYOUT IN TTY OUTPUT STREAM
; YSED TO SUPPRESS EXPLANATION UNLESS IN LONG MODE
; SET, CLEARED AND TESTED BY TTYOUT ROUTINE ONLY
F.CONZ==1B8 ;CONTROL Z TYPED IN ON TTY, SET BY TTYGET
F.EXP==1B9 ;IN LSTEXP, SET IF EXPLAIN, CLEARED IF LIST
F.HOPN==1B10 ;SET IF FGEN EXPLAIN FILE IS OPEN FOR READING
F.HRRD==1B11 ;SET IF READING EXPLAIN FILE A SECOND TIME
; IF FILE WAS OPEN, MAY START SEARCHING PAST THE ENTRY DESIRED.
; AT END OF FILE, REREAD FROM THE BEGINNING ONCE.
F.2DEC==1B12 ;SET IF WANT AT LEAST TWO CHARS IN DECIMAL OUTPUT
F.FHLC==1B13 ;SET IF LOOKING FOR TAB AFTER TEXT IN FGEN HELP FILE
F.PER==1B14 ;SET IF A PERIOD CAN BE PART OF SYMBOL
; USED TO DISTINGUISH BETWEEN FILE NAMES AND SYMBOLS
F.INFO==1B15 ;SET BY ASKMNP TO INDICATE MORE INFO WILL FOLLOW M-N OR CTY
; RESET BY ASKMN TO INDICATE END OF STRING EXPECTED AFTER M,M-N, OR CTY
N=1 ;NUMERIC VALUE OF ASKED QUESTION.
; ALSO USED TO SUBSTITUTE FOR * IN ALL STRINGS.
; CAN BE LEFT JUSTIFIED SIXBIT.
; YES ANSWERS ARE 1, NO ANSWERS ARE 0.
T1=2 ;TEMPORARY AC. USUALLY ADR OF ASCIZ MESSAGE ON SUB CALL.
T2=T1+1 ;FOR REMAINDER IN DIVISION
WD=4 ;WORD AC ON CALLS TO GETWRD(LEFT JUSTIFIED SIXBIT)
B=5 ;BYTE POINTER TO TEXT STRING
R=6 ;INPUT AND OUTPUT RADIX
LV=7 ;MODE OF ASKING QUESTIONS(-1=SHORT,0=PROMPT,1=LONG)
I=10 ;INDEX FOR LOOP COUNTS
CH=11 ;CHARACTER AC
I2=12 ;SECOND INDEX FOR LOOP COUNTS
I3=13 ;3RD INDEX FOR LOOP COUNTS
RH12=14 ;=0 FOR RH10, =1 FOR RH20
P1=15 ;"PERMANENT" ACS. THE SAVE ROUTINES DON'T EXIST,
P2=16 ; USE AT GEN LEVEL FOR LOOP VARIABLES, ETC.
P=17 ;PD POINTER
;SAVGET LOCATIONS
.SGDEV==11 ;AC FROM RUN OR GET WHICH CONTAINS DEVICE FROM WHICH MONGEN WAS RUN
.SGPPN==7 ;AC WHICH CONTAINS DIRECTORY
;SPECIAL ASCII CHARACTERS(NEVER CODE IN OCTAL SO CAN USE CREF):
C.RUB==177 ;RUBOUT
C.ALT1==175 ;OLD ALT MODES
C.ALT2==176 ;OLD ALT MODE ON SOME TTYS
C.ESC==33 ;MAP ALTS INTO ESCAPE
C.CONZ==32 ;CONTROL Z
C.FF==14 ;FORM FEED
C.CR==15 ;CARIAGE RETURN
C.LF==12 ;LINE FEED
C.CONC==3 ;CONTROL C
C.TMFH==1 ;CONTROL A IS TERMINATOR IN FGEN AUXILIARY HELP FILE
;STANDARD MAXIMUMS FOR QUESTIONS
SM.DF==^D8 ;MAXIMUM NUMBER OF DF10 DATA CHANNELS
SM.RC==2 ;MAXIMUM NUMBER OF RC10S PER CHANNEL
SM.RP==3 ;MAXIMUM NUMBER OF RP10S PER CHANNEL
SM.KPC==10 ;MAXIMUM NUMBER OF KONTROLLERS PER CHANNEL
SM.JOB==777 ;MAXIMUM NUMBER OF JOBS SYSTEM MAY INCLUDE
SM.PI==7 ;MAXIMUM PI CHANNEL NUMBER
SM.AC==17 ;HIGHEST AC NUMBER FOR HIGHEST-AC-TO-SAVE
SM.RTD==^D77 ;MAXIMUM NUMBER OF REAL TIME DEVICES
SM.HPQ==^D15 ;MAXIMUM NUMBER OF HIGH PRIORITY QUEUES
SM.CDR==2 ;MAXIMUM NUMBER OF CDRS
SM.DTA==2 ;MAXIMUM NUMBER OF DTA CONTROLLERS
SM.LPT==3 ;MAXIMUM NUMBER OF LPTS
SM.PLT==2 ;MAXIMUM NUMBER OF PLOTTERS
SM.PTY==^D510 ;MAXIMUM NUMBER OF PTYS
SM.DL10==2 ;MAXIMUM NUMBER OF DL10'S
SM.ONNM==77 ;MAXIMUM STATION NUMBER WHICH MAY BE CENTRAL SITE
SM.NODES==77 ;MAXIMUM NUMBER OF NODES
;THE CONNECTS MESSAGE HAS THE ABS VALUE
SM.CONN==^D512 ;MAXIMUM NUMBER OF CONNECTS
SM.RTTY==^D512 ;MAXIMUM NUMBER OF REMOTE TTY'S
SM.RCDR==77 ;MAXIMUM NUMBER OF REMOTE CDR'S
SM.RLPT==77 ;MAXIMUM NUMBER OF REMOTE LPT'S
SM.RPR==0 ;MAXIMUM NUMBER OF PAPER TAPE READERS
SM.RPP==77 ;MAXIMUM NUMBER OF PAPER TAPE PUNCHES
SM.RMTA==0 ;MAXIMUM NUMBER OF REMOTE MAGNETIC TAPE DRIVES
SM.RJOB==^D128 ;MAXIMUM NUMBER OF REMOTE PROCESSES
SM.TTG==^D8 ;MAXIMUM NUMBER OF TTY 8-LINE GROUPS
SM.68L==^D100 ;MAXIMUM NUMBER OF LINES ON DC68
SM.MPI==^D512 ;MAXIMUM NUMBER OF PAGES SUPPORTED ON KI10
SM.XTC==4 ;MAXIMUM NUMBER OF DA28C CHANNELS
SM.DLP==2 ;MAXIMUM NUMBER OF LINE PRINTERS ON 1091 FRONT END
SM.DCR==1 ;MAXIMUM NUMBER OF CARD READERS ON 1091 FRONT END
SM.D78==^D8 ;MAXIMUM NUMBER OF DAS78'S (IBM 360,370,2780 SUPPORT)
SM.XTC==4 ;MAXIMUM NUMBER OF DA28C CHANNELS
SM.D78==^D8 ;MAXIMUM NUMBER OF DAS78'S (IBM 360,370,2780 SUPPORT)
;DEFAULT VALUES OUTPUT BY MONGEN, MOSTLY FOR OLD SYMBOLS
IFNDEF MD.PG,<MD.P6==0> ;NO PDP 6
IFNDEF MD.2RR,<MD.2RR==1> ;ALWAYS 2 RELOCATION REGISTERS
IFNDEF MD.SEG,<MD.SEG==0> ;ALWAYS NO EXTRA SEGMENTS
IFNDEF MD.DDT,<MD.DDT==1> ;ALWAYS LOAD EDDT
IFNDEF MD.MOV,<MD.MOV==0> ;NO MOVIE
IFNDEF MD.C10,<MD.C10==1> ;CDR IS ALWAYS CR10
IFNDEF MD.DTC,<MD.DTC==0> ;NO PDP 6 DECTAPE
IFNDEF MD.TMC,<MD.TMC==0> ;NO PDP 6 MAGTAPE
IFNDEF MD.TWJ,<MD.TWJ==0> ;STANDARD VALUE FOR TMPCOR PARAMETERS
IFNDEF MD.TLJ,<MD.TLJ==0> ;...
IFNDEF MD.DCS,<MD.DCS==0> ;NO PDP 6 SCANNER
;BITS IN FEATURE TEST SWITCH TABLE
FS.VAL==1B0 ;CURRENT VALUE MUST BE SIGN BIT
ZZ==1 ;CURRENT BIT
FS.0==1B<ZZ> ;LEFT MOST BIT FOR CONFIGURATION FIELD
DEFINE FTSDEF(A),<
IRP A,<FS'A==1B<ZZ> ;ON IF DEFAULT ON FOR A
ZZ==ZZ+1
>>
FTSDEF <1040,1050,1055,1070,1077>
IFG ZZ-^D12,<PRINTX TOO MANY CONFIGURATIONS - MUST CHANGE FEATURE TEST TABLE>
;IO CHANNELS:
TTYCHN==0 ;TTY INPUT AND OUTPUT CHANNEL
FILCHN==1 ;FILE OUTPUT CHANNEL
FHLPCH==2 ;FGEN AUXILIARY HELP FILE CHANNEL
;IO STATUS BITS:
IO.EOF==20000 ;END OF FILE
;NUMBER OF I/O BUFFERS
NFILBF==2 ;NUMBER OF BUFFERS FOR FILE OUTPUT
NFHLPB==2 ;NUMBER OF BUFFERS FOR FGEN AUXILIARY HELP FILE
;OPDEFS:
OPDEF PJRST [JRST] ;EQUIVALENT TO PUSHJ POPJ PAIR
OPDEF PJUMPE [JUMPE] ;EQUIVALENT TO JUMPE [PJRST]
SUBTTL INITIALIZATION, AND DISPATCH TO PROPER GEN, CLOSE FILES
BEGINA: HLRZ 16,.JBSA## ;GET TRUE .JBFF
CAME 16,.JBFF ;SEE IF SAME
JRST BEGIN ;NO--MUST BE ^C START
MOVEM .SGDEV,RUNDEV ;SAV DEVICE FROM WHICH MONGEN WAS RUN
MOVEM .SGPPN,RUNPPN ;AND DIRECTORY
BEGIN: RESET ;RESET IO DEVICES
AOS .JBFF ;ADVANCE .JBFF TO FLAG BEGINA THAT AC'S WERE CLOBBERED
MOVE P,[IOWD MP.PDL,PDLIST] ;RESET PD PTR, SINCE HERE ON IO ERRORS
; FROM ROUTINE DEEP IN STACK
SETZB F,VARBEG ;CLEAR ALL FLAGS AND VARIABLE AREA
; EXCEPT SAVLV WHERE VERBOSCITY
; LEVEL IS SAVED AND DEBUG AND HELPF
MOVE LV,SAVLV ;SETUP HELP LEVEL FOR NEXT QUESTION
; FROM LONG TERM VALUE(INITIALLY PROMPT)
; ^C START REMEMBERS LAST PERMANENT LEVEL
; SINCE SAVLV IS NOT CLEARED
MOVE T1,[XWD VARBEG,VARBEG+1]
BLT T1,VAREND ;CLEAR VARIABLE AREA
INIT TTYCHN,1 ;TTY IN LINE MODE
SIXBIT /TTY/
XWD TOBUF,TIBUF ;OUTPUT,INPUT BUFFER HEADERS
RJRST <EREXIT <Cannot INIT TTY>,,> ;TYPE ? INTERNAL ERR AND EXIT
AOSG HELPF ;ALREADY TOLD USER ABOUT HELP?
PUSHJ P,TTYHLP ;NO, ASK USER FOR LEVEL OF VERBOSITY WITH /HELP
TLZ F,(F.CONZ) ;CLEAR CONTROL Z TYPED FLAG
SKIPN N+1,RUNDEV ;SKIP IF DEVICE FROM WHICH MONGEN WAS RUN
MOVSI N+1,'DSK' ;SPECIFIED, ELSDE START WITH DSK
SETZB N,N+2 ;CLEAR MODE AND BUFFER HEADERS
MOVEM N+1,FGDEV ;STORE DEVICE IN CASE WINS
OPEN FILCHN,N ;OPEN DEVICE
JRST FNDF1 ;NO SUCH DEVICE?
MOVE N,FHNAME ;NAME OF FGEN HELP FILE
HLLZ N+1,FHNAME+1 ;AND EXT
MOVE N+3,RUNPPN ;PPN FROM WHICH MONGEN WAS RUN
MOVEM N+3,FGPPN ;SAVE IN CASE WINS
LOOKUP FILCHN,N ;SEE IF FOUND HELP FILE
JRST FNDF1 ;NO, TRY SYS
JRST FNDFOK ;FOUND OUR HELP FILE
FNDF1: MOVSI N+1,'SYS' ;TRY DEVICE SYS
MOVEM N+1,FGDEV
SETZB N,N+2
OPEN FILCHN,N ;OPEN SYS
JRST FNDF2 ;NO SYS?
MOVE N,FHNAME ;NAME OF HELP FILE
HLLZ N+1,FHNAME+1 ;AND EXT
SETZB N+3,FGPPN ;CLEAR PPN
LOOKUP FILCHN,N ;SEE IF FO[UND HELP FILE
JRST FNDF2 ;NO, GIVE UP
JRST FNDFOK ;OK, USE SYS VERSION
FNDF2: SETZM FGDEV ;CLEAR DEVICE SO ALWAYS FAILS
TTYOUT <%Can't find FGEN.HLP@>
FNDFOK: ASKLST <Which GEN(HDW,TTY,NET,F)[
HDW to define hardware configuration
TTY to define terminal configuration
NET to define network configuration
F to define software features]>
TLNE F,(F.CONZ) ;DID USER TYPE CONTROL Z?
EXIT ;YES, EXIT TO MONITOR
MOVEM N,WCHGEN ;STORE WHICH GEN(0=HDW, 1=TTY, 2=NET, 3=F)
;LOOP TO ASK FOR FILE UNTIL SUCCESSFUL ENTER CAN BE DONE. SO INIT VARIABLES.
ASKFIL: MOVSI T1,(SIXBIT /DSK/) ;ASSUME DSK
MOVEM T1,OUTDEV ;IF USER DOES NOT SPECIFY DEVICE
MOVE N,WCHGEN ;THE GEN NUMBER(0-3)
MOVE N,FILTAB(N) ;DEFAULT FILE NAME FOR THIS GEN
; HDWCNF,TTYCNF,NETCNF,F
HLLZM N,WCHNAM ;STORE NAME OF THIS GEN(TTY,NET,MON,F)
MOVEM N,OUTNAM ;ALSO SETUP DEFAULT FILE NAME FOR THIS GEN
MOVSI T1,(SIXBIT /MAC/) ;ASSUME EXTENSION OF MAC
MOVEM T1,OUTEXT ;FOR FILE EXTENSION
SETZM OUTDAT ;CLEAR DATE ARG
SETZM OUTPPN ;AND PROJECT,PROGRAMMER ARG
ASKSTR <Output(DSK:*.MAC)>,OUTNAM ;ASK FOR FILE SPEC
MOVEI WD,0 ;SET WORD VALUE TO 0 AS FLAG THAT NO SPEC
JUMPE CH,OPNDEV ;IF CHARACTER IS 0, JUST CR TYPED
PUSHJ P,GETWRD ;GO GET WHAT MAY BE DEV: OR FILENAME
CAIE CH,":" ;IS BREAK DEVICE SEPARATOR?
JRST OPNDEV ;NO, SAVE FILE NAME AND GO INIT DEVICE
MOVEM WD,OUTDEV ;YES, STORE USER SUPPLIED DEVICE NAME
PUSHJ P,GETWRD ;GET NEXT WORD USER TYPED(FILE NAME)
OPNDEV: INIT FILCHN,1 ;INIT FILE CHANNEL IN ASCII LINE MODE
OUTDEV: SIXBIT /DSK/ ;DEVICE NAME
XWD FOBUF,0 ;OUTPUT BUFER HEADER
RJRST <TTYOUT <? Device * not available@>,OUTDEV ;TYPE ERROR
JRST ASKFIL> ;GO ASK FOR FILE SPEC AGAIN
PUSH P,.JBFF## ;SAVE JOBFF
MOVEI T1,FILBUF ;ADDR OF FILE BUFFERS
MOVEM T1,.JBFF ;SET UP JOBFF TO ALLOCATE OUR BUFFERS
OUTBUF FILCHN,NFILBF ;ALLOCATE BUFFERS
POP P,.JBFF ;RESTORE JOBFF
JUMPE WD,OUTDV0 ;WAS NO FILE NAME TYPED?
MOVEM WD,OUTNAM ;STORE CUSTOMER SUPPLIED FILE NAME
OUTDV0: CAIE CH,"." ;NO, WELL BETTER BE EXTENSION NEXT
JRST OUTDV3 ;NO, GO CHECK FOR BRACKET FOR PPN
PUSHJ P,GETWRD ;GO GET EXTENSION
HLLM WD,OUTEXT ;AND STORE FOR ENTER
OUTDV3: JUMPE CH,OUTDV4 ;END OF LINE(CR=0)?
CAIE CH,"[" ;NO, BETTER BE LEFT BRACKET FOR PPN
OUTDV1: JRST FMTERR ;NO, INCREASE VERBOSITY LEVEL AND ASK AGAIN
PUSHJ P,GETOCT ;GET PROJ NUMBER
CAIE CH,"," ;IS BREAK COMMA?
JRST FMTERR ;NO, INCREASE VERBOSITY AND ASK AGAIN
HRLZM N,OUTPPN ;YES, STORE PROJECT NO.
PUSHJ P,GETOCT ;GET PROG NUMBER
JUMPE CH,OUTDV2 ;JUMP IF END OF LINE, END OF PPN
CAIE CH,"]" ;IS BREAK RIGHT BRACKET?
FMTERR: RJRST <TTYOUT <? Not DEV:FILE.EXT[P,PN]@>
AOJA LV,ASKFIL> ;INCREASE LEV AND ASK AGAIN
OUTDV2: HRRM N,OUTPPN ;STORE PROG NUMBER
JUMPE CH,OUTDV4 ;JUMP IF END OF LINE
PUSHJ P,GETWRD ;GET NEXT WORD
JUMPN WD,FMTERR ;BETTER NOT BE ANYTHING AFTER RIGHT BRACKET
JUMPN CH,FMTERR ;IS BREAK CR?
OUTDV4: MOVE N,OUTPPN ;GET PPN TYPED
MOVEM N,SAVPPN ;SAVE FOR LATER
ENTER FILCHN,OUTNAM ;TRY TO ENTER FILE ON DEVICE
RJRST <HRRZ N,OUTEXT ;ENTER ERROR CODE FOR *
TTYOCT <? Enter error *@>,N
JRST ASKFIL> ;ASK FOR FILE NAME AGAIN
MOVE LV,SAVLV ;RESTORE PERMANENT HELP LEVEL
TLO F,(F.OFO!F.PER) ;FLAG THAT OUTPUT FILE IS NOW OPEN
; SO FILPUT WONT BE A NO-OP
; AND ALLOW PERIODS IN SYMBOLS
MOVE T1,WCHGEN ;ENTER OK, GET WHICH GEN THIS IS
PUSHJ P,@GENTAB(T1) ;DISPATCH TO PROPER GEN
; HDWGEN, TTYGEN, NETGEN, FGEN
MOVE LV,SAVLV ;RESTORE PERMANENT HELP LEVEL
; IN CASE USER TYPED /H<CR>
FILCOM <@END OF *>,OUTNAM
HLLZ N,OUTEXT ;EXTENSION OF FILE WRITTEN
FILCOM <.*@>,N
MOVEI CH,C.FF ;FORM FEED
PUSHJ P,FILPUT ;TO OUTPUT FILE
CLOSE FILCHN, ;CLOSE OUTPUT FILE
TLZ F,(F.OFO) ;FLAG THAT OUTPUT FILE IS NOT OPEN
; SO FILPUT WILL BE A NO-OP
STATZ FILCHN,740000 ;ANY ERRORS ON LAST BUFFER
;HERE ON ANY FILE ERRORS DURING EXECUTION
FILERR: RJRST <TTYOUT <? File * error>,OUTNAM
GETSTS FILCHN,N ;GET FILE STATUS FROM MONITOR
TLZ N,-1 ;MAKE SURE NO STUFF IN LH
TTYOCT <*@>;OUTPUT STATUS NUMBER AND CR
JRST .+1> ;CONTINUE
RELEASE FILCHN, ;RELEASE FILE CHANNEL
TTYOUT <File >
SKIPN N,OUTDEV ;SKIP IF DEVICE SPECIFIED
JRST CLTY1 ;NO, DONT TYPE DEVICE
TTYOUT <*:>,N
CLTY1: TTYOUT <*>,OUTNAM
HLLZ N,OUTEXT ;INCLUDE EXTENSION
TTYOUT <.*>,N
SKIPN N,SAVPPN ;SKIP IF PPN SPECIFIED
JRST CLTY2 ;NO, DONT TYPE PPN
PUSH P,LV ;SAVE CURRENT HELP LEVEL
MOVEI LV,1 ;ASSUME LONG SO PPN WILL PRINT
HLRZS N ;N=PROJECT
TTYOCT <[*,>,N
HRRZ N,SAVPPN ;N=PROGRAMMER
TTYOCT <*]>,N
POP P,LV ;RESTORE CURRENT HELP LEVEL
CLTY2: MOVE N,WCHGEN ;WHICH GEN RUN
HLLZ N,FILTAB(N) ;PICK UP NAME OF GEN
TTYOUT < Closed [*GEN finished]@@>,N ;ALSO WHICH GEN
JRST BEGIN ;GO BACK AND ASK FOR NEXT GEN
; KEEP SAME HELP LEVEL AND DO NOT ASK /HELP
SUBTTL FGEN - DIALOG TO DEFINE SOFTWARE FEATURES
FGEN: FILOUT <UNIVERSAL F - SOFTWARE FEATURE TEST FILE OUTPUT BY MONGEN DIALOG@@@>
MOVEI N,VERSION ;PUT MONGEN VERSION IN FILE FOR COMMON TO CHECK
FILOUT <INTERN [email protected]==*@XLIST@>,N ;OUTPUT TO FILE
;HERE TO FIND OUT WHAT TYPE OF SYSTEM
ASKLST <Feature set(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL)[
TINY Is minimum subset of features for KA10 timesharing
KALUG Is medium size KA10 monitor with enough features for batch
KILUG Same as KALUG but for KI10 cpu
KAFULL Includes all features of DECsystem10 monitor such
as real-time and extended file system for KA10 cpu
KIFULL Same as KAFUL but for KI10 cpu
KLFULL Same as KIFULL but for KL10 cpu]>
PUSH P,.JBFF ;SAVE JOBFF SO WILL REUSE SPACE EVERY RERUN OF FGEN
;HERE TO READ HELP FILE AND ESTABLISH SWITCHES AND THEIR BEGINNING VALUES
MOVEM N,FGTYPE ;SAVE N IN FGTYPE
PUSH P,ASKTAB(N) ;SAVE TYPE OF SYSTEM IN SIXBIT
MOVE T1,.JBFF ;FIRST AVAILABLE LOCATION FOR SWITCH TABLE
HRLI T1,T1 ;ALWAYS INDEXED BY T1
MOVEM T1,FTTAB ;STORE POINTER TO TABLE
;HERE TO FIND NEXT SWITCH IN FILE
FSETDF: HRRZ T1,.JBFF ;SWITCH TABLE ADDRESS
ADDI T1,MP.FTA ;ADD SIZE OF SWITCH TABLE
CAMG T1,.JBREL## ;IN BOUNDS?
JRST FSETD0 ;YES,PROCEED
CORE T1, ;NO, GET MORE CORE
RJRST <EREXIT <Insufficient user core@>,,>
FSETD0: FHLPOA FT,FTABEN ;POSITION FILE AT NEXT SWITCH
MOVE T1,[POINT 6,WD,11] ;BYTE POINTER TO BUILD SWITCH NAME
SETZ WD, ;START WITH FRESH AC
FSETD1: PUSHJ P,FHLPRC ;GET NEXT CHAR FROM FILE
JUMPE CH,FSETDN ;JUMP IF END OF FILE, END OF NAME
CAIN CH,"(" ;SKIP IF NOT END OF NAME
JRST FSETDN ;JUMP IF FOUND BEGINNING OF SYSTEMS FOR DEFAULT ON
CAIL CH,"A" ;SKIP IF NOT A LETTER
CAILE CH,"Z" ;SKIP IF A LETTER
JRST .+2 ;NOT A LETTER, SEE IF A NUMBER
JRST FSETD5 ;A LETTER IS PART OF A SWITCH
CAIL CH,"0" ;SKIP IF NOT A NUMBER EITHER
CAILE CH,"9" ;SKIP IF A NUMBER
JRST FSETD4 ;NOT A NUMBER OR LETTER, ASSUME END OF SWITCH AND NO ()
FSETD5: SUBI CH,"0"-'0' ;CONVERT TO SIXBIT
TLNE T1,770000 ;NO, MORE CHARS IN NAME, SKIP IF MORE THAN SIX
IDPB CH,T1 ;STORE CHAR IN NAME
JRST FSETD1 ;AND LOOP
FSETDN: MOVEM WD,@.JBFF ;STORE NAME IN SWITCH TABLE
FSETD2: PUSHJ P,GETWRF ;GET NEXT SYSTEM TYPE FOR WHICH SHOULD BE ON
CAMN WD,(P) ;SKIP IF NOT THIS TYPE OF SYSTEM
JRST FSETDO ;YES, TURN SWITCH ON
CAIE CH,")" ;SKIP IF END OF LIST OF SYSTEMS
JRST FSETD2 ;NO, SEE IF NEXT IS OUR TYPE
JRST FSETD3 ;YES, MUST BE OFF
;HERE IF SWITCH IS TO BE ON FOR THIS TYPE OF SYSTEM
FSETDO: MOVSI WD,400000 ;SET SIGN BIT FOR CURRENT VALUE
IORM WD,@.JBFF ;STORE IN TABLE
JRST FSETD3 ;MOVE TO NEXT SWITCH
FSETD4: MOVEM WD,@.JBFF ;STORE SWITCH NAME AND VALUE OFF
FSETD3: AOS .JBFF ;BUMP POINTER TO NEXT SWITCH
JRST FSETDF ;AND KEEP READING SWITCHES
;HERE WHEN NO MORE SWITCHES TO BE FOUND
FTABEN: MOVE T1,.JBFF ;END OF TABLE SO FAR
HRLI T1,N ;PLUS N FOR INDEXING TO ADD ENTRIES
MOVEM T1,FTADD ;STORE POINTER FOR ADDING ENTRIES
SETZM (T1) ;CLEAR EXTRA SPACE
HRRZI WD,1(T1)
HRL WD,T1 ;MAKE BLT PTR
BLT WD,MP.FTA-1(T1) ;CLEAR THE SPACE
MOVEI T1,MP.FTA(T1) ;SAVE SOME SPACE FOR ADDING
MOVEM T1,.JBFF ;AND STORE THE NEW JOBFF
HRRZ WD,FTTAB ;LOCATION OF BEGINNING OF TABLE
SUB WD,T1 ;MINUS LOC OF END+1=-LENGTH OF TABLE
MOVEM WD,FTLEN ;STORE MINUS LENGTH OF TABLE
POP P,(P) ;GET RID OF SYSTEM TYPE
;HERE TO ASK IF WANT STANDARD SETTING
ASKSTD: ASKLST <Standard setting(YES,NO,LIST,EXPLAIN)[
Standard values for all feature test switches for your configuration]>
JUMPE N,FNDSTD ;JUMP IF WANT STANDARD VALUES
TTYOUT <@Only standard settings have been tested by DEC
all other settings may produce incorrect operation. @@>
SOJE N,ASKFSD ;JUMP IF SAID NO
PUSHJ P,LSTEXP ;LIST OR EXPLAIN FEATURE TEST SWITCHES
JRST ASKSTD ;NOW ASK AGAIN ABOUT STANDARD SETTING
;HERE TO ASK FOR SWITCHES
ASKFSD: BTHOUT <Type "switch,value"(or LIST or EXPLAIN)[
For any feature test switch to define,
type "switch,value", value=0 for off or -1 for on, or
type LIST or EXPLAIN to list or explain switches.
Type one per line, extra carriage return when through.]@@>
FSDLOP: PUSHJ P,TTYIN ;GET NEXT LINE
JRST ASKFSD ;/HELP TYPED, ASK AT PROPER HELP LEVEL
JUMPE CH,FSDEND ;JUMP IF END OF LINE
PUSH P,B ;SAVE POSITION BEFORE SWITCH
PUSHJ P,GETWRD ;GET SWITCH NAME
POP P,T1 ;POSITION BEFORE READING SWITCH
HLRZ N,WD ;N=BEGINNING OF WORD
TRZ N,77 ;CLEAR OUT LOWER CHAR
CAIN N,'FT ' ;SKIP IF NOT "FT..."
JRST FSDLP0 ;YES, DO THIS SWITCH
MOVE B,T1 ;RESTORE BYTE POINTER TO BEFORE KEYWORD
MOVEI T1,[ASCIZ .(,LIST,EXPLAIN).] ;FIRST COMMA TO MAKE N COME OUT RIGHT
PUSHJ P,SETASK
PUSHJ P,FNDASK ;SEE IF LIST OR EXPLAIN
JRST ASKFSD
PUSHJ P,LSTEXP ;DO LIST OR EXPLAIN
JRST ASKFSD ;AND BEGIN ASKING AGAIN
FSDLP0: CAIE CH,"," ;SKIP IF FOLLOWED BY COMMA
JRST FSDERR ;JUMP IF IMPROPER FORMAT
TLZ WD,777700 ;CLEAR "FT"
JUMPE WD,FSDERR ;JUMP IF NO SWITCH NAME
PUSHJ P,FNDSWT ;FIND SWITCH IN TABLE, RETURN INDEX IN N
PUSH P,WD ;SAVE SWITCH NAME
PUSH P,T1 ;SAVE INDEX IN TABLE, EVEN IF NEW SWITCH
PUSHJ P,GETDEC ;GET VALUE
JUMPE CH,FSDLP2 ;JUMP IF END OF LINE FOUND
CAIE CH,"-" ;SKIP IF FOUND MINUS SIGN
JRST FSDERR ;NO, ILLEGAL FORMAT
PUSHJ P,GETDEC ;GET ACTUAL VALUE
JUMPN CH,FSDERR ;ERROR IF NOT END OF LINE NOW
FSDLP2: POP P,T1 ;RESTORE INDEX IN TABLE OF SWITCH
POP P,WD ;RESTORE SWITCH NAME IN CASE NEW
JUMPGE T1,FSDNEW ;JUMP IF NEW SWITCH
MOVSI T2,(FS.VAL) ;BIT FOR CURRENT VALUE
ANDCAM T2,@FTTAB ;TURN VALUE OFF
SKIPE N ;SKIP IF 0 SPECIFIED
IORM T2,@FTTAB ;NO, TURN VALUE ON
JRST FSDLOP ;LOOP FOR ALL SWITCHES USER TYPES
;HERE IF USER TYPED NEW SWITCH, MAKE SURE AND IF SO OUTPUT SWITCH DIRECTLY
FSDNEW: MOVSI T1,(FS.0) ;LEFT MOST DEFAULT BIT FOR SWITCH ENTRY
MOVN T2,CNFIND ;INDEX OF CONFIGURATION IN CNF TABLES
LSH T1,(T2) ;POSITION BIT FOR THIS CNF
TDO T1,WD ;ADD IN SWITCH NAME
SKIPE N ;SKIP IF SWITCH IS OFF
TLOA T1,(FS.VAL) ;SWITCH IS ON, SET VALUE BIT
TLZ T1,777700 ;SWITCH IS OFF, CLEAR VALUE AND DEFAULT
MOVE N,WD ;N=SWITCH NAME
TLO N,'FT ' ;ADD BACK "FT"
PUSH P,T1 ;SAVE NEW SWITCH ENTRY
ASKYN <%New switch *(Y,N)[if Y, keep switch, else ignore it]>
POP P,T1 ;RESTORE NEW SWITCH TABLE ENTRY
JUMPE N,ASKFSD ;JUMP IF IGNORE THE SWITCH
;HERE TO ADD SWITCH TO TABLE IF POSSIBLE
MOVSI N,-MP.FTA ;LENGTH OF EXTENDABLE TABLE
SKIPE @FTADD ;SKIP IF FOUND EMPTY PLACE
AOBJN N,.-1 ;NO, KEEP LOOKING
JUMPGE N,FSDFUL ;JUMP IF EXTENDABLE TABLE IS FULL
MOVEM T1,@FTADD ;STORE NEW SWITCH IN TABLE
JRST ASKFSD ;GO BACK FOR MORE
FSDFUL: FILSTR <XP *@>
JRST ASKFSD
FSDERR: TTYOUT <? Not "switch,value" or keyword@>
AOJA LV,ASKFSD ;ASK AGAIN WITH NEW HELP LEVEL
FSDEND: MOVE LV,SAVLV ;RESTORE PERMANENT HELP LEVEL
ASKFSA: ASKYN <Set each switch(Y,N)[List each switch with its current value and ask for new value]>
JUMPE N,FSAEND ;JUMP IF NO
HRLZ T1,FTLEN ;AOBJN PTR TO SWITCHES
FSALOP: SKIPN N,@FTTAB ;N=SWITCH ENTRY
JRST FSAEN2 ;END OF TABLE
LSH N,^D12 ;N=SWITCH NAME
PUSH P,N ;SAVE NAME OF SWITCH IN CASE LOOP
PUSH P,T1 ;SAVE AOBJN PTR
FSALP0: MOVE N,-1(P) ;RESTORE NAME OF SWITCH IN CASE LOOPING
MOVE T1,(P) ;RESTORE AOBJN PTR IN CASE LOOPING
SKIPL @FTTAB ;SKIP IF SWITCH IS ON
JRST FSALP1 ;NO, ITS OFF
ASKLST <FT*,-1(ON,OFF,LIST,EXPLAIN,END)>
JRST FSATST
FSALP1: ASKLST <FT*,0(ON,OFF,LIST,EXPLAIN,END)>
FSATST: MOVE T1,(P) ;RESTORE AOBJN PTR
CAIN N,4 ;NO SKIP IF END TYPED
JRST FSAEN1 ;YES, DO NO MORE
SOJG N,FSALEX ;JUMP IF LIST OR EXPLAIN
MOVSI T2,(FS.VAL) ;VALUE BIT
ANDCAM T2,@FTTAB ;TURN VALUE OFF
CAIE N,0 ;SKIP IF OFF TYPED
IORM T2,@FTTAB ;TURN SWITCH ON
POP P,T1 ;RESTORE AOBJN PTR
POP P,N ;GET RID OF NAME ON STACK
FSAEN2: AOBJN T1,FSALOP ;LOOP FOR ALL SWITCHES IN TABLE
JRST FSAEND
FSAEN1: POP P,T1 ;RESTORE AOBJN PTR
POP P,N ;GET RID OF NAME ON STACK
FSAEND: JRST FNDSTD
FSALEX: PUSHJ P,LSTEXP ;DO LIST OR EXPLAIN
JRST FSALP0 ;AND REASK ABOUT THIS SWITCH
;HERE TO CREATE FGEN OUTPUT FILE
FNDSTD: FILOUT <@LIST@>
TLZ F,(F.HOPN) ;CLEAR OPEN FLAG, HEADER IS AT BEGINNING
;HERE TO POSITION FGEN HELP FILE AT HEADER
FHLPOS HEADER,FNDSTE
PUSHJ P,FHLPFL ;COPY HEADER TO OUTPUT FILE
JRST FNDST1 ;GO DO THE FILE
;HERE IF CANT FIND HEADER
FNDSTE: TTYOUT <% Can't find file header in help file@>
;HERE TO OUTPUT SWITCHES FROM TABLE
FNDST1: HRLZ T1,FTLEN ;AOBJN PTR TO SWITCH TABLE
STDOUT: SKIPN N,@FTTAB ;N=SWITCH ENTRY
JRST STDOUL ;IGNORE 0 ENTRIES
PUSH P,T1 ;SAVE AOBJN PTR
TLZ N,777700 ;CLEAR JUNK
TLO N,'FT ' ;AND MAKE FT...
PUSH P,N ;SAVE NAME OF SWITCH FOR COMMENT
MOVE T2,FGTYPE
CAMN N,[SIXBIT 'FTVM'] ;VIRTUAL MEMORY?
CAIG T2,3
JRST STDOU0 ;NO V-M
ASKLST <Do you want the virtual memory facility(YES,NO)[VMSER must
be on your distribution tape]>
MOVE T1,-1(P)
MOVSI T2,(FS.VAL)
ANDCAM T2,@FTTAB
JUMPN N,STDOU0
IORM T2,@FTTAB
STDOU0: MOVE N,(P) ;REMEMBER SWITCH NAME
FILOUT <XP *,>
MOVE T1,-1(P)
SKIPL @FTTAB ;SKIP IF SWITCH ON
JRST STDOU1 ;NO, ITS OFF
FILOUT <-1>
JRST STDOU2
STDOU1: FILOUT <0>
;HERE TO COPY TEXT FROM HELP FILE ABOUT THIS SWITCH
STDOU2: POP P,WD ;RESTORE NAME OF SWITCH TO SEARCH AUX FILE
FHLPOS *,STDOU3
PUSHJ P,FHLPFC ;OUTPUT TEXT AS COMMENT
STDOU3: FILOUT <@>
POP P,T1 ;RESTORE AOBJN PTR
STDOUL: AOBJN T1,STDOUT ;LOOP FOR ALL SWITCHES IN TABLE
FEND: FILOUT < END>
POP P,.JBFF ;RESTORE ORIGINAL JOBFF
POPJ P,
SUBTTL HDWGEN - DIALOG TO DEFINE HARDWARE CONFIGURATION
HDWGEN: FILOUT <SUBTTL HDWCNF - HARDWARE CONFIGURATION DEFINITION FILE OUTPUT BY MONGEN@@@>
FILOUT <DEFINE XP(A,B),<A==:B>@@@>
MOVEI N,VERSION ;MONGEN VERSION NO.
FILOUT <XP M.MON,*@>,N ;OUTPUT TO FILE
PUSHJ P,ASKSYS ;FIND OUT WHAT TYPE OF SYSTEM
FILOUT <XP M.KA10,*@>,M.P10
FILOUT <XP M.KI10,*@>,M.P10I
FILOUT <XP M.KL10,*@>,M.KL10
FILOUT <XP M.1040,*@>,M.1040
FILOUT <XP M.1050,*@>,M.1050
FILOUT <XP M.1055,*@>,M.1055
FILOUT <XP M.1070,*@>,M.1070
FILOUT <XP M.1077,*@>,M.1077
FILOUT <XP M.1080,*@>,M.1080
FILOUT <XP M.1088,*@>,M.1088
FILOUT <XP M.1091,*@>,M.1091
FILOUD <XP MD.P6,*@>,MD.P6
AOS M.CPU ;INDICATE AT LEAST 1 CPU
SKIPE M.1088 ;DUAL KL10?
AOS M.CPU ;YES, INDICATE TWO CPUS
SKIPN M.1055 ;DUAL PDP10?
SKIPE M.1077 ;DUAL PDP10I?
AOS M.CPU ;YES, INDICATE TWO CPUS
FILOUT <XP M.CPU,*@>,M.CPU
ASKNAM: ASKSTR <System name[24 characters or less]>
CAILE N,^D24 ;24 OR LESS?
RJRST <TTYOUT <% More than 24 characters@>
JRST ASKNMA>
ASKNMA: MOVEI N,0 ;STORE 0 TO MAKE SURE ONLY 24 CHARS OUTPUT
DPB N,[POINT 7,ASCSTR+4,34]
FILSTR <DEFINE SYSNAM
< ASCIZ &*&>@>
ASKDAT: DATE T1, ;GET TODAYS DATE
IDIVI T1,^D12*^D31 ;YEAR + DAYS IN THIS YEAR
ADDI T1,^D64 ;1964 IS YEAR 0
PUSH P,T1 ;SAVE YEAR
MOVE T1,T2 ;NO. DAYS IN CURRENT YEAR
IDIVI T1,^D31 ;T1=MONTH-1, T2=DAY OF MONTH-1
PUSH P,T2 ;SAVE DAYS-1 OF MONTH
MOVEI N,1(T1) ;MONTH (1-12)
FILOUT <DEFINE SYSDAT> ;START MACRO DEFINITION IN FILE
PUSHJ P,FILLAB ;OUTPUT LEFT ANGLE BRACKET TO FILE, CRLF
FILDC2 <ASCIZ &*>,N ;OUTPUT MONTH
MOVEM N,M.MON ;SAVE FOR SYMBOL OUTPUT TOO
POP P,T1 ;DAYS-1 IN MONTH
MOVEI N,1(T1) ;DAY OF MONTH(1-31)
FILDC2 <-*>,N ;OUTPUT TO FILE
MOVEM N,M.DAY ;SAVE FOR SYMBOL OUTPUT TOO
POP P,N ;YEAR(64-99)
FILDC2 <-*&>,N ;OUTPUT TO FILE
MOVEM N,M.YEAR ;SAVE FOR SYMBOL OUTPUT TOO
PUSHJ P,FILRAB ;OUTPUT RIGHT ANGLE BRACKET,CRLF
FILOUT <XP M.MON,*@>,M.MON
FILOUT <XP M.DAY,*@>,M.DAY
FILOUT <XP M.YEAR,*@>,M.YEAR
ASKSER: SETZB I,CPU ;SET LOOP COUNTER TO 0
;LOOP TO ASK FOR SERIAL NUMBERS FOR ALL CPUS IN SYSTEM
ASKSLP: ASKDEC <CPU* serial #(1-10000)>,I ;ASK FOR CPUN
MOVEM N,M.C0SN(I) ;SAVE FOR CPU1 CHECK
SOJL I,ASKSN1 ;ANY PREVIOUS CPUS ALREADY ANSWERED?
;LOOP TO SCAN ALL PREVIOUS CPU SERIAL NUMBERS TO SEE IF THE SAME
ASKSN0: CAMN N,M.C0SN(I) ;SAME AS PREVIOUS SERIAL NUMBER?
RJRST <TTYOUT <? Cannot be same as CPU*@>,I
JRST ASKSER> ;ASK ALL CPUS OVER AGAIN
SOJGE I,ASKSN0 ;ANY MORE PREVIOUS CPUS?
ASKSN1: MOVE I,CPU ;CPU NUMBER
;ASK FOR DEVICES ON THIS CPU IO BUS:
SETZ N, ;IN CASE THIS IS A KL10
SKIPE M.KL10 ;KL10 DOES NOT HAVE DK10'S
JRST ASKSN2
ASKDEC <# DK10's on CPU*(1,0-2)[Real time clock]>,CPU
ASKSN2: MOVEM N,M.RT0(I) ;STORE ANSWER FOR THIS CPU
SKIPN N ;THIS CPU HAVE A DK10?
SETOM SCPUNR ;NO, FLAG SOME CPU AS NO REAL-TIME CLOCK
ADDM N,M.RTX ;ACCUM. TOTAL NO. OF DK10S FOR SYSTEM
AOS I,CPU ;INCREMENT CPU ITERATION COUNTER
CAMGE I,M.CPU ;DONE FOR ALL CPUS IN THIS SYSTEM?
JRST ASKSLP ;NO, GO BACK AND ASK FOR ANOTHER
FILOUT <XP M.C0SN,*@>,M.C0SN
FILOUT <XP M.C1SN,*@>,M.C1SN
FILOUT <XP M.C2SN,*@>,M.C2SN
FILOUT <XP M.C3SN,*@>,M.C3SN
FILOUT <XP M.C4SN,*@>,M.C4SN
FILOUT <XP M.C5SN,*@>,M.C5SN
FILOUT <XP M.RT0,*@>,M.RT0
FILOUT <XP M.RT1,*@>,M.RT1
FILOUT <XP M.RT2,*@>,M.RT2
FILOUT <XP M.RT3,*@>,M.RT3
FILOUT <XP M.RT4,*@>,M.RT4
FILOUT <XP M.RT5,*@>,M.RT5
FILOUT <XP M.RTX,*@>,M.RTX
ASKYN <Exclude Monitor overhead from user run time(Y,N)[
Overhead is CPU time spent clock queue processing, command
decoding, core shuffling, swapping, and scheduling.
User run time always includes UUO execution and
unless EBOX/MBOX runtime accounting is selected
(KL10 systems only) includes IO interrupt service time.
On KA or KI systems, each CPU must have a DK10]>
FILOUT <XP M.RTCO,*@>,N
ASKEMT: SKIPN M.KL10 ;KL10 SYSTEM?
JRST NOEMRT ;NO, NO EBOX/MBOX TIME ACCOUNTING
ASKYN <EBOX/MBOX runtime accounting?(y,n)[
If EBOX/MBOX runtime accounting is selected in a KL10
based system, user runtime is computed using the KL10
internal accounting clocks]>
MOVEM N,M.EMRT ;SAVE FOR LATER
FILOUT <XP M.EMRT,*@>,M.EMRT
SKIPN M.EMRT
JRST NOEMR1 ;NO PI EXCLUSION EITHER
ASKYN <Exclude PI time from user runtime?(y,n)[
An answer of "yes" to this question will cause the monitor
to set up the KL10 accounting meters in such a manner that
users will not be charged for cpu time used during interrupts]>
MOVEM N,M.XPI ;SAVE
FILOUT <XP M.XPI,*@>,M.XPI
JRST ASKRTC ;NOW GO ASK ABOUT DK10'S
NOEMRT: FILOUT <XP M.EMRT,0@>
NOEMR1: FILOUT <XP M.XPI,0@>
ASKRTC: SKIPE M.RTX ;ANY DK10'S ON SYSTEM?
SKIPE M.KL10 ;SKIP IF NOT A KL10 SYSTEM
JRST OUTRTC ;NO, SKIP BUNCH OF QUESTIONS
SKIPE SCPUNR ;IS SOME CPU WITHOUT A DK10?
JRST ASKRCS ;YES, TOO BAD SKIP HIGH PREC QUESTION
ASKYN <High precision time accounting(Y,N)[Use DK10 clock for
10 micro-second time accounting]>
MOVEM N,M.RTCA
JUMPN N,OUTRC1 ;IF HIGH PRECISION NEED SERVICE ROUTINE
ASKRCS: ASKYN <DK10 software(Y,N)[Include real time clock service routine]>
OUTRC1: MOVEM N,M.RTC ;NON-ZERO IF NEED RTC CLOCK SERVICE
OUTRTC: FILOUT <XP M.RTCA,*@>,M.RTCA
FILOUT <XP M.RTC,*@>,M.RTC
ASKDFS: MOVEI N,SM.DF ;MAXIMUM NUMBER OF DF10S
ASKDEC <# Data Channels(2,1-*)[DF10s, DF10Cs, DX10s OR RH20'S for disk and tape]>
FILOUT <XP M.CHN,*@>,N
MOVEM N,M.CHN ;SAVE FOR CHANNEL LOOP
SETOM MKON ;MAGTAPE CONTROLLER #
;LOOP ONCE FOR EACH CHANNEL
CHNLOP: MOVE N,CHN ;CHANNEL ITERATION COUNTER(0,1,...)
ASKLST <Channel * Type (DF10,DF10C,DX10,RH20)>
MOVEM N,CHNTYP
MOVE N,CHN
FILOUT <XP M.CH*T,>,N ;OUTPUT CHANNEL TYPE
MOVE N,CHNTYP ;GET BACK ANSWER
FILOUT <*@>,N ;AND COMPLETE OUTPUT
MOVE N,CHN
BTHOUT <On channel # *:@>,CHN
MOVE N,CHNTYP ;TYPE OF CHANNEL
CAIN N,2 ;DX10?
JRST DXLOOP ;YES, ASK ABOUT DX10, TX01, TU70'S
MOVEI RH12,0 ;NO, ASSUME SOME FLAVOR FO RH10/DF10
CAIN N,3 ;IS IT AN RH20?
MOVEI RH12,1 ;YES
ADDM RH12,M.RH20 ;COUNT NO OF RH20S
FILOUT <XP M.C*TX,0@>,CHN ;NO TX01S ON THIS CHL
SKIPE N,RH12 ;IF AN RH20,
SOJA N,NORD10 ; THERE AREN'T ANY RD10S
ASKDEC < # RC10s(0-2)[Controllers for RD10 Burroughs disks and
RM10B Bryant drums on channel *]>,CHN
NORD10: MOVE I,N ;SET UP ITERATION FOR THIS CONTROLLER
FILOUT <XP M.C*FH,>,CHN ;FIRST PART OF CALL
FILOUT <*@>,I ;SECOND HALF
JUMPE I,FHEND ;ANY CONTROLLERS AT ALL?
;LOOP FOR FH* ON THIS CHANNEL:
FHLOOP: AOS N,M.RC10 ;INCREMENT NO. OF RC10 IN SYSTEM
ADDI N,'A'-1 ;MAKE SIXBIT LETTER
ROT N,-6 ;LEFT JUSTIFIED
ASKDEC < # Units on FH*(1-4)>,N
PUSH P,N ;SAVE NO. OF FH* UNIT ON THIS CONTROLLER
MOVE N,M.RC10 ;MAKE SIXBIT CONTROLLER LETTER AGAIN
ADDI N,'A'-1
ROT N,-6
FILOUT <XP M.FH*,>,N ;FIRST HALF
POP P,N ;RESTORE NO. OF FH* UNITS ON THIS CONTROLLER
FILOUT <*@>,N
SOJG I,FHLOOP
FHEND: SKIPE N,RH12 ;IF AN RH20,
SOJA N,NORS04 ; THERE AREN'T ANY RS04S
ASKDEC < # RH10S for RS04'S(0-3)[Controllers for RS04 swapping
disks on channel *]>,CHN
NORS04: MOVE I,N
FILOUT <XP M.C*FS,>,CHN
FILOUT <*@>,I
JUMPE I,FSEND
;LOOP FOR FS* ON THIS CHANNEL:
FSLOOP: AOS N,M.RH1S ;INCREMENT NO. OF RH10 IN SYSTEM
ADDI N,'A'-1 ;MAKE SIXBIT LETTER
ROT N,-6 ;LEFT JUSTIFIED
ASKDEC < # Units on FS*(1-8)>,N
PUSH P,N ;SAVE NO. OF FS* UNIT ON THIS CONTROLLER
MOVE N,M.RH1S ;MAKE SIXBIT CONTROLLER LETTER AGAIN
ADDI N,'A'-1
ROT N,-6
FILOUT <XP M.FS*,>,N ;FIRST HALF
POP P,N ;RESTORE NO. OF FS* UNITS ON THIS CONTROLLER
FILOUT <*@>,N
SOJG I,FSLOOP
FSEND: JUMPN RH12,ASKRP2
ASKDEC < # RH10S for RP04'S, RP06'S(0-3)[Controllers for RP04, RP06 disk pack
units on channel *]>,CHN
JRST ASKRP3
ASKRP2: ASKDEC < # RH20S for RP04'S, RP06'S(0-1)[Controllers for RP04, RP06 disk pack
units on channel *]>,CHN
ASKRP3: MOVE I,N
FILOUT <XP M.C*RP,>,CHN
FILOUT <*@>,I
JUMPE I,RPEND
;LOOP FOR RP* ON THIS CHANNEL
RPLOOP: AOS M.RH1P(RH12) ;INCR COUNT OF RH10S OR RH20S
AOS N,M.RHP4
ADDI N,'A'-1
ROT N,-6
PUSH P,N
ASKDEC < # Units on RP*(1-8)>,N
EXCH N,(P)
FILOUT <XP M.RP*,>,N
POP P,N
FILOUT <*@>,N
MOVE N,M.RHP4
SUBI N,1
FILOUT <XP M.RP*T,>,N ;INDICATE TYPE
SKIPE N,RH12
MOVE N,M.RH20 ;0 FOR RH10, CONTROL NUMBER FOR RH20
FILOUT <*@>,N
SOJG I,RPLOOP
RPEND: SKIPE N,RH12
SOJA N,NORP10 ;NO RP10S IF RH20
ASKDEC < # RP10s(0-3)[Controllers for Memorex and ISS RP02 and RP03
disk pack units on channel *]>,CHN
NORP10: MOVE I,N ;SETUP ITERATION COUNT FOR RP FOR THIS CHANNEL
FILOUT <XP M.C*DP,>,CHN ;OUTPUT FIRST HALF
FILOUT <*@>,I ;NO. OF CONTROLLERS ON THIS CHANNEL
JUMPE I,DPEND ;ANY RP10S AT ALL ON THIS CHANNEL?
;LOOP FOR RP10S ON THIS CHANNEL
DPLOOP: AOS N,M.RP10 ;INCREMENT NO. OF RP10S ON SYSTEM
ADDI N,'A'-1 ;FORM CONTROLER LETTER
ROT N,-6
ASKDEC < # Units on DP*(1-8)>,N
PUSH P,N ;SAVE NO. UNITS ON THIS CONTROLLER
MOVE N,M.RP10 ;NO. OF RP10S SO FAR
ADDI N,'A'-1 ;FORM CONTROLER LETTER
ROT N,-6 ;LEFT JUSTIFY
FILOUT <XP M.DP*,>,N
POP P,N ;RESTORE NO. UNITS ON THIS CONTROLLER
FILOUT <*@>,N ;AND OUTPUT
SOJG I,DPLOOP ;ANY MORE RP CONTROLLERS ON THIS CHANNEL?
DPEND: SKIPE N,RH12
SOJA N,NOT1B ;NO TM10B IF RH20
ASKDEC < # TM10Bs(0-2)[Tape Controller for NRZI only drives
on channel *]>,CHN
NOT1B: MOVE I,N ;SET UP ITERATION COUNTER
FILOUT <XP M.C*TB,>,CHN ;FIRST PART OF CALL
FILOUT <*@>,I ;SECOND PART
JUMPE I,TBEND ;ANY TM10B'S AT ALL?
;LOOP FOR TB* ON THIS CHANNEL
TBLOOP: AOS M.TM10 ;COUNT OF TM10'S ON SYSTEM
AOS N,MKON ;CONTROLLER #
FILOUT <XP M.MT*T,1@>,N ;MARK AS TM10B
PUSHJ P,TAPSUB ;DO TAPE CONTROLLER SUBR
SOJG I,TBLOOP
TBEND: SKIPE N,RH12
SOJA N,NOTC10 ;NO TC10 IF RH20
ASKDEC < # TC10Cs(0-1)[Special Systems Tape Controller for
TU42's and TU43's on channel *]>,CHN
NOTC10: MOVE I,N
FILOUT <XP M.C*TC,>,CHN
FILOUT <*@>,I
JUMPE I,TCEND
TCLOOP: AOS M.TC10 ;COUNT OF TC10'S ON SYSTEM
AOS N,MKON ;CONTROLLER #
FILOUT <XP M.MT*T,2@>,N ;MARK AS TC10
PUSHJ P,TAPSUB ;DO SUBR
SOJG I,TCLOOP ;LOOP TILL DONE
TCEND: JUMPN RH12,ASKT22
ASKDEC < # RH10's for TM02'S (0-2)[Mass-Bus tape controller for
TU16's and TU45's on channel *]>,CHN
JRST ASKT23
ASKT22: ASKDEC < # RH20's for TM02'S (0-1)[Mass-Bus tape controller for
TU16's and TU45's on channel *]>,CHN
ASKT23: MOVE I,N ;CHAN
FILOUT <XP M.C*T2,>,CHN
FILOUT <*@>,I ;OUTPUT NUMBER OF RH'S
JUMPE I,DXEND ;GO IF NONE
MOVEI N,-1(I) ;BUMP NUMBER OF "EXTRA" TAPE KONTROLLERS
ADDM N,TAPOFS
MOVE N,MKON ;MAKE M.T2?T = 0 IF RH10
ADDI N,1 ; OR = RH20 # IF AN RH20
FILOUT <XP M.T2*T,>,N
SKIPE N,RH12
MOVE N,M.RH20
FILOUT <*@>,N
T2LOOP: AOS M.T210
AOS N,MKON
FILOUT <XP M.MT*T,4@>,N
FILOUT <XP M.MT*C,>,MKON
FILOUT <*@>,CHN
FILOUT <XP M.MT*N,>,MKON
FILOUT <*@>,I
MOVE N,M.T210
SUBI N,1
JUMPN RH12,T2LP1
ASKDEC < How many TM02's on RH10 # * (1-8)[EACH UNIT CAN CONTROL
UP TO 8 SUB-UNITS = TAPE DRIVES]>,N
JRST T2LP2
T2LP1: ASKDEC < How many TM02's on RH20 # * (1-8)[EACH UNIT CAN CONTROL
UP TO 8 SUB-UNITS = TAPE DRIVES]>,N
T2LP2: MOVE I2,N
FILOUT <XP M.MT*U,>,MKON
FILOUT <*@>,I2
PUSH P,I
SETZB I,I3
T2LP3: ASKDEC <How many drives on TM02 * (1-8)>,I
ADD I3,N
PUSH P,N
FILOUT <XP M.MT*>,MKON
FILOUT <*>,I
POP P,N
FILOUT <,*@>,N
ADDI I,1
SOJG I2,T2LP3
POP P,I
FILOUT <XP M.MT*,>,MKON
FILOUT <*@>,I3
SOJG I,T2LOOP
T2END: JRST DXEND
;ROUTINE TO ASK FOR # OF UNITS ON EACH KONTROLLER
TAPSUB: FILOUT <XP M.MT*C,>,MKON ;CHL NUMBER
FILOUT <*@>,CHN
TAPSB0: MOVE N,MKON ;GET KONROLLER #
ADD N,TAPOFS ;PLUS EXTRA LETTERS FOR TM02 UNITS
ADDI N,'A' ;MAKE INTO SIXBITCH
ROT N,-6
ASKDEC < # Units on MT*(1-8)>,N
PUSH P,N ;SAVE ANSWER
FILOUT <XP M.MT*,>,MKON ;NUMBER OF UNITS
POP P,N ;RESTORE
FILOUT <*@>,N ;ON EACH KONTROLLER
POPJ P, ;RETURN
DXLOOP: ASKDEC < # Controllers(0-1)[TX01's or TX02's for TU70 Tape Drives on channel *]>,CHN
MOVE I,N
FILOUT <XP M.C*FH,0@>,CHN ;NO FH,DP,FS,TB,TC
FILOUT <XP M.C*DP,0@>,CHN
FILOUT <XP M.C*RP,0@>,CHN
FILOUT <XP M.C*FS,0@>,CHN
FILOUT <XP M.C*TB,0@>,CHN
FILOUT <XP M.C*TC,0@>,CHN
FILOUT <XP M.C*T2,0@>,CHN
FILOUT <XP M.C*TX,>,CHN ;OUTPUT FIRST PART OF CALL
FILOUT <*@>,I ;SECOND PART
JUMPE I,DXEND
TXLOOP: AOS M.TX01 ;INCREMENT NUMBER OF TX01'S ON SYSTEM
AOS N,MKON ;INCR KONTROLLER ID
FILOUT <XP M.MT*T,3@>,N ;MARK AS TX01
PUSHJ P,TAPSUB ;ASK FOR UNITS
SOJG I,TXLOOP
DXEND: AOS N,CHN ;INCREMENT CHANNEL LOOP COUNTER
CAMGE N,M.CHN ;FINISHED WITH ALL CHANNELS?
JRST CHNLOP ;NO, ASK FOR CONTRLLERS ON THIS CHANNEL
CHNEND: FILOUT <XP M.RC10,*@>,M.RC10 ;OUTPUT NO. OF RC10 IN SYSTEM
FILOUT <XP M.RH1S,*@>,M.RH1S ;OUTPUT NO. OF RH10/RP04'S IN SYSTEM
FILOUT <XP M.RH1P,*@>,M.RH1P ;OUTPUT NO. OF RH10/RP04'S IN SYSTEM
FILOUT <XP M.RH2P,*@>,M.RH2P ;OUTPUT NO. OF RH20/RP04'S IN SYSTEM
FILOUT <XP M.RH20,*@>,M.RH20 ;OUTPUT NUMBER OF RH20S IN SYSTEM
FILOUT <XP M.RHP4,*@>,M.RHP4 ;OUTPUT NO. OF RP04 CONTROLLERS IN SYSTEM
FILOUT <XP M.RP10,*@>,M.RP10 ;OUTPUT NO. OF RP10S IN SYSTEM
FILOUT <XP M.TC10,*@>,M.TC10 ;OUTPUT NO. 0F TC10S IN SYSTEM
FILOUT <XP M.TX01,*@>,M.TX01 ;OUTPUT N0. OF TX01S IN SYSTEM
FILOUT <XP M.TM02,*@>,M.T210 ;OUTPUT NO. OF TM02'S IN SYSTEM
ASKTMA: ASKDEC < # TM10As(0,0-2)[I/O Bus type Controller for NRZI only drives]>,N
MOVE I,N ;SET UP ITERATION COUNTER
JUMPE I,TAEND ;ANY TM10A'S AT ALL?
TALOOP: AOS M.TM10 ;COUNT OF TM10'S ON SYSTEM
AOS N,MKON ;INCR KONTROLLER ID
FILOUT <XP M.MT*T,0@>,N ;MARK AS TM10A
PUSHJ P,TAPSB0 ;GET UNIT INFO
SOJG I,TALOOP
TAEND: FILOUT <XP M.TM10,*@>,M.TM10 ;OUTPUT NO. OF TM10'S IN SYSTEM
MOVE I,MKON ;GET # TAPE KONTROLLERS
JUMPL I,ASKDTE ;JUMP IF ZERO
BTHOUT <Specify which drives (M-N) are 7 track drives.
[Type one number (M) or one range(M-N) or ALL on separate lines.
Type an extra carriage return when through.]@>
TAP7LP: MOVE N,MKON
SUB N,I ;START FROM ZERO
PUSH P,N ;SAVE NUMBER
FILOUT <DEFINE MACKN* (X)>,N
POP P,N ;RESTORE N
ADDI N,'A' ;CONVERT TO SIXBIT
ROT N,-6
ASKTMN <For controller MT*@>,N
SOJGE I,TAP7LP ;LOOP TILL DONE
BTHOUT <Specify which tape drives (M-N) are capable of 6250 BPI densities.
[Type one number (M) or one range (M-N) or ALL on separate lines.
Type an extra carriage return when through.]@>
MOVE I,MKON ;PICK UP THE NUMBER OF CONTROLLERS
TAP6LP: MOVE N,MKON
SUB N,I ;START FROM ZERO
PUSH P,N ;SAVE NUMBER
FILOUT <DEFINE MACK6* (X)>,N
POP P,N ;RESTORE N
ADDI N,'A' ;CONVERT TO SIXBIT
ROT N,-6
ASKTMN <For controller MT*@>,N
SOJGE I,TAP6LP ;LOOP TILL DONE
ASKDTE: SKIPN M.KL10 ;IS THIS A KL10?
JRST ASKJOB ;NO, DON'T ASK ABOUT DTES
ASKDEC <# DTEs on CPU0(2,1-4)[BYTE TRANSFER DEVICE USED FOR KL10 to PDP-11 front end communications]>
FILOUT <XP M.0DTE,*@>,N
FILOUT <XP M.1DTE,0@>
ASKJOB: MOVEI N,SM.JOB ;MAXIMUM NUMBER OF JOBS
ASKDEC <# Jobs(1-*)[Maximum number attached and detached, not
counting null job]>
FILOUT <XP M.JOB,*@>,N
FILOUD <XP MD.2RR,*@>,MD.2RR
FILOUD <XP MD.SEG,*@>,MD.SEG
FILOUD <XP MD.DDT,*@>,MD.DDT
ASKCOR: MOVSI N,(SIXBIT /K/) ;ASSUME PDP-10
SKIPN M.P10 ;IS IT A KA10
MOVE N,[SIXBIT /pages/] ;NO--ASK PAGES INSTEAD OF K
BTHOUT <Max. * of core>,N
MOVEI N,^D256 ;MAX K OF CORE(ASSUME KA10)
SKIPN M.P10 ;IS IT AK KA?
MOVEI N,SM.MPI ;NO, MAX NO. OF PAGES ON KI10
ASKDEC < For each job(0,0-*)[0 means all of core]>,N
FILOUT <XP M.CORE,*@>,N
MOVEI N,^D256 ;ASSUME KA10
SKIPN M.P10 ;IS IT A KA10?
MOVEI N,^D4096 ;YES, UP TO 4 MILLION WORDS ALLOWED
ASKNKC: ASKDEC <# K total system core(32-*)[ONCE-only reports if
less core at startup]>
FILOUT <XP M.NKC,*@>,N
ASKTPS: ASKLST <Clock ticks per second(60,50)[Power line frequency]>
SKIPN N ;SKIP IF 50
TROA N,^D60 ;NO, 60
MOVEI N,^D50 ;50
FILOUT <XP M.TPS,*@>,N
ASKRTD: MOVEI N,SM.RTD ;MAXIMUM NUMBER OF REAL TIME DEVICES
ASKDEC <# Real-time devices(0,0-*)[Max. # which can be put
on PI channels simultaneously]>
FILOUT <XP M.RTD,*@>,N
JUMPN N,ASKLK1 ;DO NOT ASK ABOUT LOCKING IF REAL TIME
; SINCE MUST HAVE LOCKING FOR REAL TIME
ASKLOK: ASKYN <Allow jobs to be locked in core(Y,N)>
ASKLK1: FILOUT <XP M.LOK,*@>,N
JUMPE N,ASKMG1
ASKMGC: SKIPE M.P10 ;KA10 OR KI10?
JRST ASKLKA
MOVEI N,SM.MPI ;MAXIMUM NUMBER OF PAGES ON KI10
ASKDEC <# PAGES min guaranteed among jobs not locked in core(0,0-*)[
minimum free core pool for unlocked jobs, 0 assumes all of core]>
JRST ASKMG1
ASKLKA: MOVEI N,^D256 ;256 K IS MAXIMUM ON KA10
ASKDEC <# K min guaranteed among jobs not locked in core(0,0-*)[
minimum free core pool for unlocked jobs, 0 assumes all of core]>
ASKMG1: FILOUT <XP M.MGC,*@>,N
ASKHPQ: MOVEI N,SM.HPQ ;MAXIMUM NUMBER OF HIGH PRIORITY QUEUES
ASKDEC <# High priority queues(0,0-*)>
FILOUT <XP M.HPQ,*@>,N
ASKTMP: ASKYN <CCL commands to stay in core(Y,N)[System programs pass
commands to each other via core(TMPCOR UUO) rather than disk]>
FILOUT <XP M.TMP,*@>,N
JUMPE N,ASKMET ;JUMP IF NO TMPCOR
FILOUD <XP MD.TWJ,*@>,MD.TWJ
FILOUD <XP MD.TLJ,*@>,MD.TLJ
ASKMET: ASKYN <Meter(Y,N)[Performance analysis metering(METER UUO)]>
FILOUT <XP M.METR,*@>,N
ASKSCK: ASKYN <SYSCHK(Y,N)[Initial Hardware integrity check at ONCE-only time]>
FILOUT <XP M.SYSC,*@>,N
ASKMSG: ASKYN <MSGSER(Y,N)[Support for device MPX. (more than one device
on an I/O channel). This feature is required for TYPSET-10
and MCS-10]>
FILOUT <XP M.MSG,*@>,N
ASKPSI: ASKYN <PSISER(Y,N)[Advanced programmed software interrupt service -
Support for the PISYS. UUO. This provides an easy
and powerful interrupt method for program to trap asynchronous
events. Required by MCS-10]>
FILOUT <XP M.PSI,*@>,N
ASKIPC: ASKYN <IPCF(Y,N)[Inter process communition facility]>
FILOUT <XP M.IPCF,*@>,N
ASKENQ: ASKYN <ENQ/DEQ(Y,N)[Sychronization Primitives To-allow
simultaneous file update by multiple co-operating processes]>
FILOUT <XP M.EQDQ,*@>,N
ASKCDR: MOVEI N,SM.CDR ;MAXIMUM NUMBER OF CDRS
ASKDEC <# I/O Bus CDRs(1,0-*)[Card reader]>
FILOUT <XP M.CDR,*@>,N
SKIPE N ;SKIP IF NO CDR
MOVEI N,MD.C10 ;YES, GET DEFAULT VALUE FOR CR10
FILOUT <XP MD.C10,*@>,N
ASKCDP: ASKYN <CDP(Y,N)[Card punch]>
FILOUT <XP M.CDP,*@>,N
JUMPE N,ASKDIS
ASKYN <CP10D(Y,N)[Special Systems unbuffered Card Punch]>
FILOUT <XP M.CP1D,*@>,N
ASKDIS: ASKYN <DIS(Y,N)[Display device(VP10,340,30,VB10C) as distinguished from
display terminals]>
JUMPE N,ASKDS1 ;ANY DISPLAYS?
ASKLST <Type(VP10,340,VB10C)[Answer VP10 for Type 30]>
AOS M.VP10(N) ;SET M.VP10, M.340 OR M.VBXC TO 1
ASKDS1: FILOUT <XP M.VP10,*@>,M.VP10
FILOUT <XP M.340,*@>,M.340
FILOUT <XP M.VBXC,*@>,M.VBXC
SETZ N, ; FOR FILOUT OF M.DIS
SKIPN M.VP10 ;SKIP IF VP10 DISPLAY
SKIPE M.340 ;SKIP IF NOT 340 DISPLAY
MOVEI N,1 ;FILOUT M.DIS=1 IF EITHER 340 OR VP10
FILOUT <XP M.DIS,*@>,N ;
ASKDTA: MOVEI N,SM.DTA ;MAXIMUM NUMBER OF DTA CONTROLLERS
ASKDEC <# TD10s(1,0-*)[DECtape controls]>
FILOUT <XP M.TD10,*@>,N
MOVE I,N ;SETUP DTA UNIT ITERATION COUNTER
SKIPE N ;SKIP IF NO DECTAPES
MOVEI N,MD.DTC ;YES, GET DEFAULT VALUE FOR PDP 6 DTA
FILOUT <XP MD.DTC,*@>,N
JUMPE I,DTEND ;ANY DTA UNIT AT ALL?
DTLOOP: AOS N,DTA ;YES, INCREMENT COUNT OF DT CONTROLLERS IN SYSTEM
ADDI N,'A'-1 ;FORM SIXBIT CONTROLLER LETTER
ROT N,-6 ;LEFT JUSTIFY
ASKDEC < # Units on DT*(1-8)>,N
PUSH P,N ;SAVE ANSWER(NO OF UNITS ON THIS CONTROLER
MOVE N,DTA ;CONTROLLER NUMBER
ADDI N,'A'-1 ;FORM SIXBIT CONTROLLER LETTER
ROT N,-6 ;LEFT JUSTIFY
FILOUT <XP M.DT*,>,N ;FIRST HALF
POP P,N ;RESTORE NO. OF UNITS ON THIS CONTROLER
FILOUT <*@>,N ;OUTPUT
SOJG I,DTLOOP ;ANY MORE CONTROLLERS?
DTEND:
ASKLPT: MOVEI N,SM.LPT ;MAXIMUM NUMBER OF LPTS
ASKDEC <I/O Bus LPTs(1,0-*)[Line printers]>
FILOUT <XP M.LPT,*@>,N
PUSH P,N ;SAVE # OF LPTS
SKIPE N ;SKIP IF NO LPT
MOVEI N,MD.MOV ;GET DEFAULT VALUE FOR MOVIE
FILOUT <XP MD.MOV,*@>,N
POP P,N ;GET # OF LPTS
SETZM LPTCNT ;INIT TEMP COUNTER OF LPTS
JUMPE N,CFELPT ;DON'T WORRY ABOUT LC IF NO LPTS
MOVE I,N ;SET UP LOOP COUNTER
MORLPT: MOVE N,LPTCNT ;GET CURRENT NUMBER OF LPT
ASKYN <LPT* Lower case(Y,N)[Does LPT* have lower case capability]>,N
PUSH P,N ;SAVE ANSWER
MOVE N,LPTCNT ;GET NUMBER OF THIS LPT
ADDI N,'0' ;CONVERT TO PRINTABLE FORM
ROT N,-6 ;LEFT-JUSTIFY IT
FILOUT <XP M.LP*L,>,N ;OUTPUT SYMBOL NAME
POP P,N ;GET ANSWER BACK AGAIN
FILOUT <*@>,N ;OUTPUT IT AS SYMBOL VALUE
AOS LPTCNT ;BUMP COUNT OF LPTS
SOJG I,MORLPT ;LOOP THRU ALL LPTS
CFELPT: SKIPN N,M.1091 ;THIS A 1091?
JRST NOFEL1 ;NO, DON'T ASK THE QUESTION
ASKDEC <# line printers on the master front end on CPU0(0,0-2)>
NOFEL1: ADDM N,M.DLPT
FILOUT <XP M.LP01,*@>,N
FILOUT <XP M.LP02,0@>
FILOUT <XP M.LP03,0@>
FILOUT <XP M.LP04,0@>
FILOUT <XP M.LP11,0@>
JUMPE N,NOCFEL ;DON'T ASK ABOUT PRINTERS THAT AREN'T THERE
MOVE I,N ;SET UP LOOP COUNTER
CFELL: MOVE N,LPTCNT ;GET CURRENT NUMBER OF LPT
ASKYN <LPT* Lower case(Y,N)[Does LPT* have lower case capability]>,N
PUSH P,N ;SAVE ANSWER
MOVE N,LPTCNT ;GET NUMBER OF THIS LPT
ADDI N,'0' ;CONVERT TO PRINTABLE FORM
ROT N,-6 ;LEFT-JUSTIFY IT
FILOUT <XP M.LP*L,>,N ;OUTPUT SYMBOL NAME
POP P,N ;GET ANSWER BACK AGAIN
FILOUT <*@>,N ;OUTPUT IT AS SYMBOL VALUE
AOS LPTCNT ;BUMP COUNT OF LPTS
SOJG I,CFELL ;LOOP THRU THIS DTE
NOCFEL: SKIPN N,M.1091 ;THIS A 1091?
JRST NOFEC1 ;NO, DON'T ASK ABOUT FE CDRS
ASKDEC <# card readers on the master front end on CPU0(0,0-1)>
NOFEC1: ADDM N,M.DCDR
FILOUT <XP M.CR01,*@>,N
FILOUT <XP M.CR02,0@>
FILOUT <XP M.CR03,0@>
FILOUT <XP M.CR04,0@>
FILOUT <XP M.CR11,0@>
FILOUT <XP M.DLPT,*@>,M.DLPT
FILOUT <XP M.DCDR,*@>,M.DCDR
NOCFE:
ASKPLT: MOVEI N,SM.PLT ;MAX NUMBER OF PLOTTERS
ASKDEC <PLTS(0,0-*)[Plotters]>
FILOUT <XP M.PLT,*@>,N
ASKPTP: ASKYN <PTP(Y,N)[Paper tape punch]>
FILOUT <XP M.PTP,*@>,N
ASKPTR: ASKYN <PTR(Y,N)[Paper tape reader]>
FILOUT <XP M.PTR,*@>,N
ASKPTY: MOVEI N,SM.PTY ;MAXIMUM NUMBER OF PTYS
ASKDEC <# PTYs(20,0-*)[Pseudo-terminals - each operator
service program and Batch stream needs one]>
FILOUT <XP M.PTY,*@>,N
;CODE ASSEMBLED ONLY WHEN DC44 SUPPORT IS WISHED
;THE ONLY ADDITION OUTSIDE THIS CONDITIONAL HAS BEEN THE DEFINITION
;OF A SECOND LOOP CONTROL REGISTER I2
DEFINE FILLST (FILLER,PREFIX,POSTFX)
< IRP PREFIX
< FILVAL <PREFIX'FILLER'POSTFX>
> ;;END OF IRP PREFIX
> ;;END OF FILLST MACRO
DEFINE FILVAL(SYMBOL)
< FILOUT <XP SYMBOL,*@>,SYMBOL
>
ASKYN <DC44(Y,N)[
The DC44 is a TYPESET-10 front end which supports
the following devices:
PA611R High speed paper tape reader
PA611P High speed paper tape punch
LPC11 Online photocomposition machine]>
JUMPE N,LOOP47 ;NO FINISH THE CONFIGURATION
MOVEM N,M.DC44 ;NUMBER OF DCC44 PORTS
ASKDEC <DL10 Port number for DC44(0,0-7)[]>
MOVEI I,1(N) ;+1 FOR ADDRESSING
ASKDEC <# of PA611Rs(0,0-32)[
High speed paper tape readers]>
MOVEM N,PAR-1(I) ;SET PARXN
ASKDEC <# of PA611Ps(0,0-32)[
High speed paper tape punches for driving "hot metal" machines]>
MOVEM N,PAP-1(I) ;SET PAXN
ASKDEC <# of LPC11s(0,0-6)[
Online photocomposition machines]>
MOVEM N,LPC-1(I) ;SET LPCXN
ASKYN <PC11(Y,N)[
Paper tape reader/punch on the PDP-11]>
MOVEM N,PCR-1(I) ;SET PCRXN
MOVEM N,PCP-1(I) ;SET PCPXN
SETZB I,TYPNUM ;DC44 NUMBER
LOOP45: SETZB N,I2 ;ZERO RESULT AND DEVICE COUNTER
LOOP46: ADD N,@LSTD44(I2) ;GET THE DEVICE CONTRIBUTION
CAIE I2,TYPDEV ;TO THE TOTAL NUMBER OF DEVICES
AOJA I2,LOOP46 ;FOR THIS DC44
MOVEM N,TYPNU(I) ;SET NUMBER FOT THIS ONE
ADDM N,TYPNUM ;TOTAL NUMBER OF TYPESET DEVICES
ADDI I,1 ;NEXT DC44
CAIE I,10 ;ALL DONE
JRST LOOP45 ;AND THERE IS
LOOP47: FILOUT <XP M.DC44,*@>,M.DC44
FILOUT <XP TYPNUM,*@>,TYPNUM
ZZZ=0
REPEAT 8,<
FILLST (\ZZZ,<TYPNU,PAR,PAP,LPC,PCR,PCP>,N)
ZZZ=ZZZ+1
> ;;END OF REPEAT 4
ASKXTC: MOVEI N,SM.XTC ;MAX # OF DA28S
ASKDEC <# of DA28s(0,0-*)[Interprocessor channels for PDP8/11/15]>
FILOUT <XP M.XTC,*@>,N
JUMPE N,XTCEND
ASKDEC <# of lines for TTY pool(8,0-512)[Lines reserved for use on DA28 channels]>
XTCEND: FILOUT <XP M.XTL,*@>,N
ASKD78: MOVEI N,SM.D78 ;MAXIMUM NUMBER OF DAS78'S
ASKDEC <# DAS78'S(0,0-*)[IBM 360, 370, and/or 2780 support]>
MOVEM N,M.DAS78 ;SAVE NUMBER FOR COUNT DOWN
FILOUT <XP M.DAS78,*@>,M.DAS78
SKIPN ,M.DAS78 ;SEE IF ANY DAS78'S
JRST ASK78B ;NO DAS78'S
PUSH P,[0] ;PUT A 0 ON THE STACK TO COUNT UP
ASK78A: PUSHJ P,ASK78S ;ASK ABOUT THE DAS78'S
AOS (P) ;SET UP TO ASK ABOUT NEXT ONE
SOSE M.DAS78 ;ASKED ABOUT ALL DAS78'S?
JRST ASK78A ;NO, ASK ABOUT ANOTHER ONE
POP P,(P) ;CLEAN THE STACK
ASK78B: FILOUT <XP M.0D78,*@>,M.0D78
FILOUT <XP M.1D78,*@>,M.1D78
FILOUT <XP M.2D78,*@>,M.2D78
FILOUT <XP M.3D78,*@>,M.3D78
FILOUT <XP M.4D78,*@>,M.4D78
FILOUT <XP M.5D78,*@>,M.5D78
FILOUT <XP M.6D78,*@>,M.6D78
FILOUT <XP M.7D78,*@>,M.7D78
FILOUT <XP M.D78L,*@>,M.D78L
FILOUT <XP M.XXI,*@>,M.D78L
FILOUT <XP M.XXO,*@>,M.D78L
JRST ASK78C ;DONE DAS78'S.
ASK78S: MOVE N,-1(P) ;GET A NUMBER FOR DAS78
TTYOCT <@For DAS78 *:@@>
ASKDEC <Which DL10 port is the DAS78 connected to (0,0-7)]
Each DAS78 PDP11 is connected to a DL10 port]>
PUSH P,N ;SAVE PORT NUMBER ON STACK
ASKDEC <Decimal lines on the DAS78 (1-16)[
Each DAS78 can support up to 16 IBM 360s, 370s, and or 2780s]>
ADDM N,M.D78L ;KEEP A SUM OF THE DAS78 LINES
MOVE T1,(P) ;GET DAS78 NUMBER
MOVEM N,M.0D78(T1) ;SAVE LINES IN PROPER PORT LOC
POP P,(P) ;CLEAN STACK
POPJ P, ;EXIT
ASK78C:
ASKDSY: FILOUT <@RADIX 10@>; ;SET RADIX TO DECIMAL IN FILE
BTHOUT <Decimal "symbol,value"[
For any symbols to be defined.
Type one per line, extra carriage return when through]@>
DSYLOP: PUSHJ P,TTYIN ;GET NEXT LINE
JRST ASKDSY ;/HELP TYPED, ASK AT PROPER HELP MODE
JUMPE CH,DSYEND ;JUST A CR?
PUSHJ P,GETWRD ;GET FIRST WORD
CAIE CH,"," ;IS IT FOLLOWED BY ,
JRST DSYERR ;NO, ERROR
PUSHJ P,GETDEC ;GET SECOND WORD AS DECIMAL
JUMPN CH,DSYERR ;IS IT LAST WORD ON LINE?
FILSTR <XP *@>; ;YES, WRITE IT OUT
JRST DSYLOP ;LOOP BACK FOR NEXT LINE
DSYERR: TTYOUT <? Not symbol,value@>
AOJA LV,ASKDSY ;TRY AGAIN
DSYEND: FILOUT <RADIX 8@>; ;SET RADIX BACK TO NORMAL IN FILE
MOVE LV,SAVLV ;RESTORE PERMANENT HELP LEVEL
; IN CASE HE TYPED /H<CR>
ASKOSY: BTHOUT <@Octal "symbol,value"[
For any symbol to be defined.
Type one per line, extra carriage return when through]@>
OSYLOP: PUSHJ P,TTYIN ;GET NEXT LINE FOR USER
JRST ASKOSY ;/HELP TYPED, ASK IN DESIRED HELP MODE
JUMPE CH,OSYEND ;JUST A BLANK LINE?
PUSHJ P,GETWRD ;NO, GET FIRST WORD
CAIE CH,"," ;IS BREAK A COMMA?
JRST OSYERR ;NO, ERROR
PUSHJ P,GETOCT ;YES, GET VALUE IN OCTAL
JUMPN CH,OSYERR ;IS THIS END OF LINE?
FILSTR <XP *@>; ;YES, WRITE IT OUT
JRST OSYLOP ;LOOP BACK FOR MORE
OSYERR: TTYOUT <? Not symbol,value@>
AOJA LV,ASKOSY ;GO TRY AGAIN
OSYEND: MOVE LV,SAVLV ;RESTORE PERMANENT HELP LEVEL
; IN CASE HE TYPED /H<CR>
ASKSSY: BTHOUT <@SIXBIT "symbol,value"[
For any sixbit symbol to be defined.
Type one per line, extra carriage return when through]@>
SSYLOP: PUSHJ P,TTYIN ;GET NEXT LINE
JRST ASKSSY ;/HELP TYPED, ASK IN PROPER MODE
JUMPE CH,SSYEND ;CARRIAGE RETURN?
PUSH P,B ;SAVE BYTE POINTER TO STRING
PUSHJ P,GETWRD ;GET FIRST WORD
CAIE CH,"," ;IS BREAK A COMMA?
JRST SSYERR ;NO, ERROR
PUSHJ P,GETWRD ;GET SECOND WORD
JUMPN CH,SSYERR ;ERROR IF MORE TYPE-IN
POP P,B ;RESTORE BYTE POINTER
PUSHJ P,GETWRD ;GET FIRST WORD AGAIN
FILOUT <XP *>,WD ;OUTPUT FIRST WORD
PUSHJ P,GETWRD ;GET SECOND WORD
FILOUT <,<SIXBIT/*/>@>,WD ;OUTPUT SIXBIT VALUE
JRST SSYLOP ;AND LOOK FOR MORE
SSYERR: POP P,B ;RESTORE PDL
TTYOUT <? Not symbol,value@>
AOJA LV,ASKSSY ;GO TRY AGAIN
SSYEND: MOVE LV,SAVLV ;RESTORE PERMANENT HELP LEVEL
; IN CASE USER TYPED /H<CR>
ASKSP1: FILOUT <@DEFINE SPCINT>
PUSHJ P,FILLAB ;LEFT ANGLE BRACKET,CRLF TO FILE
ASKS1A: BTHOUT <Type "device-mnemonic,PI-channel" for special devices[
With neither channel AC save routine nor device data block,
the "device-mnemonic" must be 3 characters or less.
Type extra carriage return when through.]@>
SP1LOP: PUSHJ P,GETDPI ;GET NEXT LINE AND SCAN FOR DEV:PI
AOJA LV,ASKS1A ;ERROR OR /HELP
JUMPE WD,SP1END ;JUST CR TYPED?
RJUMPN CH,<TTYOUT <? Not device-mnemonic,PI-channel@>
AOJA LV,ASKS1A> ;GO ASK FOR MORE
FILSTR <SPASGINT *@>; ;OUTPUT ANSWER TO FILE
JRST SP1LOP ;GO GET ANOTHER LINE
SP1END: PUSHJ P,FILRAB ;RIGHT ANGLE BRACKET,CRLF TO FILE
MOVE LV,SAVLV ;RESTORE PERMANENT HELP LEVEL
; IN CASE HE TYPED /H<CR>
ASKSP2: FILOUT <@DEFINE SPCDDB> ;START MACRO DEFINITION
PUSHJ P,FILLAB ;LEFT ANGLE BRACKET,CRLF TO FILE
ASKS2A: BTHOUT <Type "device-mnemonic,PI-channel,no.-of-devices"[
For special devices with device data blocks.
the "device-mnemonic" must be 3 characters or less.
Type extra carriage return when through.]@>
SP2LOP: PUSHJ P,GETDPI ;GET NEXT LINE, AND SCAN FOR DEV:PI
AOJA LV,ASKS2A ;/HELP OR ERROR, REASK QUESTION
JUMPE WD,SP2END ;JUST CR TYPED?
CAIE CH,"," ;IS BREAK A COMMA?
JRST SP2ERR ;END OF LINE TOO SOON?
PUSHJ P,GETDEC ;GET NO. OF DEVICES
JUMPN CH,SP2ERR ;IS THIS LAST WORD ON LINE?
FILSTR <SPASGDDB *@>; ;YES, OUTPUT TRIPLE
JRST SP2LOP ;GO GET ANOTHER LINE
SP2ERR: TTYOUT <? Not device-mnemonic,PI-channel, no.-of-devices@>
AOJA LV,ASKS2A ;GO GET MORE
SP2END: PUSHJ P,FILRAB ;RIGHT ANGLE BRACKET,CRLF TO FILE
MOVE LV,SAVLV ;RESTORE PERMANENT HELP LEVEL
; IN CASE HE TYPED /H<CR>
ASKSP3: FILOUT <@DEFINE SPCSAV> ;START MACRO DEFINITION
PUSHJ P,FILLAB ;LEFT ANGLE BRACKET,CRLF
ASKS3A: BTHOUT <Type "device-mnemonic,PI-channel,highest-ac-to-save"[
For special devices with channel save routines to save acs up to
the "highest-ac-to-save". "Device" must be 3 char or less.
Type extra carriage return when through.]@>
SP3LOP: PUSHJ P,GETDPI ;GET NEXT LINE AND SCAN FOR DSK:PI
AOJA LV,ASKS3A ;/HELP OR ERROR, REASK QUESTION
JUMPE WD,SP3END ;JUST CR TYPED?
CAIE CH,"," ;IS BREAK AFTER PI A COMMA?
JRST SP3ERR ;NO, ERROR
PUSHJ P,GETOCT ;GET HIGHEST AC TO SAVE
JUMPN CH,SP3ERR ;IS THIS LAST ITEM ON LINE?
CAILE N,SM.AC ;SKIP IF LEGAL AC
RJRST <MOVEI N,SM.AC
TTYOCT <? Highest-ac-to-save must be * or less@>
AOJA LV,ASKS3A>
FILSTR <SPASGSAV *@>; ;OUTPUT TRIPLE TO FILE
JRST SP3LOP ;GO GET NEXT LINE
SP3ERR: TTYOUT <? Not device-mnemonic,PI-channel,highest-ac-to-save@>
AOJA LV,ASKS3A ;GO ASK FOR MORE
SP3END: PUSHJ P,FILRAB ;FILL IN A RIGHT ANGLE BRACKET
HDWEND: POPJ P, ;END OF HDWGEN, RETURN AND CLOSE FILE
SUBTTL NETGEN - DIALOG TO DEFINE NETWORK CONFIGURATIONS
NETGEN: FILOUT <SUBTTL NETCNF - NETWORK CONFIGURATION DEFINITION FILE OUTPUT BY MONGEN DIALOG@@@>
FILOUT <DEFINE XP(A,B),<A==:B>@@@>
MOVEI N,VERSION ;MONGEN PROGRAM VERSION NUMBER
FILOUT <XP M.NET,*@>,N ;OUTPUT TO FILE FOR COMMON TO CHECK FOR
FILOUT <XP M.RSS,0@>; ;OLD REMOTE STATION CODE SWITCH OFF
FILOUT <XP M.DS10,0@>; ;NO DS10
FILOUT <XP M.DP01,0@>; ;OR DP01
ASKNET: ASKYN <Network software(Y,N)[
Software to support remote computers: DECsystem-10's,
PDP-11's, PDP-8's (requires FTNET to be -1)]>
FILOUT <XP M.NET,*@>
JUMPE N,NETNON
MOVEI N,SM.NODES ;MAX NODES
ASKDEC <How many nodes do you wish to support(3,0-*)[Maximum]>,N
FILOUT <XP M.NODE,*@>,N;NUMBER OF NODES
JUMPE N,NETEND ;IF NONE, SKIP TO END
SETZM M.DL10 ;ASSUME NO DL10'S
MOVEI P1,1 ;COUNT FRONT ENDS STARTING AT 1
ASKDEC <How many DC75NP's or DN87's on the system(1,0-8)[Network
front-ends connected to DL10's.]>
MOVEM N,M.DC75 ;store number of 75/87's
FILOUT <XP M.DC75,*@>,N
SKIPN ,M.DC75 ;ask which ports if non-zero
JRST ASK85B ;if none, write out symbols as zeros
SETZ P2, ;P2=0 SAYS DL10 INTERFACE
ASK85A: PUSHJ P,ASK85S ;ask which port
ADDI P1,1 ;increment counter
SOSE M.DC75 ;are we done?
JRST ASK85A ;no, continue
ASK85B: FILOUT <XP M.0D85,*@>,M.0D85;output all symbols
FILOUT <XP M.1D85,*@>,M.1D85
FILOUT <XP M.2D85,*@>,M.2D85
FILOUT <XP M.3D85,*@>,M.3D85
FILOUT <XP M.4D85,*@>,M.4D85
FILOUT <XP M.5D85,*@>,M.5D85
FILOUT <XP M.6D85,*@>,M.6D85
FILOUT <XP M.7D85,*@>,M.7D85
SETZM M.0D85 ;LET'S TIMESHARE THESE LOCATIONS
MOVE T1,[M.0D85,,M.1D85] ;WHICH MEANS WE HAVE TO ZERO THEM
BLT T1,M.7D85 ;SINCE THE PREVIOUS PAGE USED THEM
ASKDEC <How many DN87S's on the system(1,0-3)[Network
front-ends connected to DTE-20's]>
MOVEM N,M.DC75 ;store number of 75/87's
FILOUT <XP M.D87S,*@>,N
SKIPN ,M.DC75 ;ask which ports if non-zero
JRST ASK87B ;if none, write out symbols as zeros
MOVEI P2,1 ;SAY THIS IS DTE INTERFACED FRONT END
ASK87A: PUSHJ P,ASK85S ;ask which port
ADDI P1,1 ;increment counter
SOSE M.DC75 ;are we done?
JRST ASK87A ;no, continue
ASK87B: FILOUT <XP M.0D8S,*@>,M.0D85;output all symbols
FILOUT <XP M.1D8S,*@>,M.1D85;NOTE: ASK87S SHOULD ENSURE PRIMARY DTE IS
FILOUT <XP M.2D8S,*@>,M.2D85; RESERVED FOR RSX-20F
FILOUT <XP M.3D8S,*@>,M.3D85
ASKCEN: MOVEI N,SM.ONNM ;HIGHEST ALLOWED NODE NUMBER
ASKOCT <Node number of central site(1-*)[
Unique number identifying DECsystem-10 to network.]>,n
FILOUT <XP OURNNM,*@>,N
ASKNNM:
ASKSTR <Name of central site[Six characters or less.]>
CAILE N,^D6 ;CORRECT NUMBER?
RJRST <TTYOUT <%More than 6 characters.@>
jrst asknnm>
filSTR <@DEFINE SYSNDE
<SIXBIT &*&>@>
MOVEI N,SM.RTTY ;MAX REMOTE TTY'S
ASKDEC <# of remote TTY's(0,0-*)[
Maximum number of teletypes on network nodes to be
handled at any given time.]>,N
MOVEM N,M.CONN ;START COUNT OF DEFAULT # OF CONNECTIONS
FILOUT <XP M.RTTY,*@>,N
MOVEI N,SM.RCDR ;MAX REMOTE CDR'S
ASKDEC <# of remote CDR's(0,0-*)[
Maximum number of card readers on network nodes to be
handled at any given time.]>,N
ADDM N,M.CONN
FILOUT <XP M.RCDR,*@>,N
MOVEI N,SM.RLPT ;MAX REMOTE LPT'S
ASKDEC <# of remote LPT's(0,0-*)[
Maximum number of line printers on network nodes to be
handled at any given time.]>,N
ADDM N,M.CONN
FILOUT <XP M.RLPT,*@>,N
MOVEI N,SM.RPR ;MAX REMOTE PTR'S
ASKDEC <# of remote PTR's(0,0-*)[
Maximum number of paper tape readers on network nodes to be
handled at any given time.]>,N
ADDM N,M.CONN
FILOUT <XP M.RPTR,*@>,N
MOVEI N,SM.RPP ;MAX REMOTE PTP'S
ASKDEC <# of remote PTP's(0,0-*)[
Maximum number of paper tape punches on network nodes to be
handled at any given time.]>,N
ADDM N,M.CONN
FILOUT <XP M.RPTP,*@>,N
MOVEI N,SM.RMTA ;MAX REMOTE MTA'S
ASKDEC <# of remote MTA's(0,0-*)[
Maximum number of magnetic tape drives on network nodes to be
handled at any given time.]>,N
ADDM N,M.CONN
FILOUT <XP M.RMTA,*@>,N
MOVEI N,SM.RJOB
ASKDEC <# of remote processes(0,0-*)[
Maximum number of remote processes that can be connected to at
any given time (requires FTTSK to be -1).]>,N
ADDM N,M.CONN
FILOUT <XP M.RJOB,*@>,N
ASKYN <Remote data entry software(Y,N)[
Software to support remote data entry terminals for MCS-10 applications
(requires FTRDX to be -1)]>
FILOUT <XP M.RDX,*@>
MOVE N,M.CONN ;GET # CONNECTS NEEDED
CAILE N,SM.CONN ;MORE THAN WE CAN HANDLE?
MOVEI N,SM.CONN ;YES, USE THE MAX.
ASKDEC <# of connects(*,1-512)[
Maximum number of simultaneous connections.]>,N
FILOUT <XP M.CONN,*@>
JRST NETEND
NETNON: ;DEFINE ALL SYMBOLS AS ZERO
FILOUT <XP M.NODE,0@>
FILOUT <XP M.DC75,0@>
FILOUT <XP M.0D85,0@>
FILOUT <XP M.1D85,0@>
FILOUT <XP M.2D85,0@>
FILOUT <XP M.3D85,0@>
FILOUT <XP M.4D85,0@>
FILOUT <XP M.5D85,0@>
FILOUT <XP M.6D85,0@>
FILOUT <XP M.7D85,0@>
FILOUT <XP M.D87S,0@>
FILOUT <XP M.0D8S,0@>
FILOUT <XP M.1D8S,0@>
FILOUT <XP M.2D8S,0@>
FILOUT <XP M.3D8S,0@>
FILOUT <XP OURNNM,0@>
FILSTR <@DEFINE SYSNDE<>@>
FILOUT <XP M.CONN,0@>
FILOUT <XP M.RTTY,0@>
FILOUT <XP M.RCDR,0@>
FILOUT <XP M.RLPT,0@>
FILOUT <XP M.RPTR,0@>
FILOUT <XP M.RPTP,0@>
FILOUT <XP M.RMTA,0@>
FILOUT <XP M.RJOB,0@>
FILOUT <XP M.RDX,0@>
NETEND: POPJ P, ;END OF NETGEN, RETURN AND CLOSE FILES
ASK85S: MOVE N,P1 ;GET FRONT END #
TTYOCT <For front end number *:@>;identify which PDP11
JUMPN P2,ASK851 ;DO RIGHT MESSAGE FOR DL10/DTE-20
ASKDEC <To which DL10 port is the DC75 or DN87 connected (0,0-7)[]>;ask port
JRST ASK852 ;SKIP DTE-20 QUESTION
ASK851: ASKDEC <To which DTE20 is the DN87S connected (1,1-3)[]>
ASK852: MOVE T1,N ;use answer as index
MOVEI N,1 ;value to set word M.nD85 to
MOVEM N,M.0D85(T1) ;set word to 1 indicating port in use as 85
POPJ P, ;return
SUBTTL TTYGEN - DIALOG TO DEFINE TERMINAL CONFIGURATION
TTYGEN: FILOUT <SUBTTL TTYCNF - TERMINAL CONFIGURATION DEFINITION FILE OUTPUT BY MONGEN@@@>
FILOUT <DEFINE XP(A,B),<A==:B>@@@>
MOVEI N,VERSION ;MONGEN VERION NO.
FILOUT <XP M.TTY,*@>,N ;OUTPUT TO FILE FOR COMMON TO CHECK
PUSHJ P,ASKSYS ;FIND TYPE OF PROCESSOR
ASKHRD: ASKDEC <How many DC10s(1,0-2)[
The DC10 is a data line scanner]>
MOVEM N,M.DC10
ASKDEC <How many DC68s(1,0-2)[
The DC68 is a PDP-8 680 or 680I communications system]>
MOVEM N,M.DC68
ASKDEC <How many DC76s(1,0-8)[
The DC76 is a PDP-11 communications system]>
MOVEM N,M.DC76
FILOUT <XP M.DC10,*@>,M.DC10
FILOUT <XP M.DC68,*@>,M.DC68
FILOUT <XP M.DC76,*@>,M.DC76
FILOUD <XP MD.DCS,*@>,MD.DCS
SKIPN M.DC10 ;HAVE A DC10?
JRST ASK68 ;NO--DO NOT ASK ABOUT IT
ASKDG: SKIPN M.DC10 ;ANY DC10 HARDWARE?
JRST ASK68
PUSH P,[0] ;ASK ABOUT DC10 #0
PUSHJ P,ASKDCX ; ..
AOS (P) ;ASK ABOUT DC10 #1
MOVE N,M.DC10 ;GET # OF DC10'S
CAME N,(P) ;ALL DONE
PUSHJ P,ASKDCX ; ..
POP P,(P) ;CLEAN UP THE STACK
ASK68: SKIPN M.DC68 ;ANY DC68 HARDWARE
JRST ASK76 ;NO--ASK ABOUT DC76
PUSH P,[0] ;ASK ABOUT DC68 #0
PUSHJ P,ASKD68 ; ..
AOS (P) ;ASK ABOUT DC68 #1
SOSE M.DC68 ; IF THERE ARE 2 DC10'S
PUSHJ P,ASKD68 ; ..
POP P,(P) ;CLEAN UP THE STACK
ASK76: SKIPN M.DC76 ;HAVE A DC76?
JRST ASKH3 ;NO--DO NOT ASK DC76 QUESTIONS
PUSH P,[0]
PUSHJ P,ASKD76
AOS (P)
SOSE M.DC76
JRST .-3
POP P,(P)
ASKH3: FILOUT <XP M.D70N,*@>,M.D70N
FILOUT <XP M.D71N,*@>,M.D71N
FILOUT <XP M.D72N,*@>,M.D72N
FILOUT <XP M.D73N,*@>,M.D73N
FILOUT <XP M.D74N,*@>,M.D74N
FILOUT <XP M.D75N,*@>,M.D75N
FILOUT <XP M.D76N,*@>,M.D76N
FILOUT <XP M.D77N,*@>,M.D77N
FILOUT <XP M.TTG0,*@>,M.TTG0
FILOUT <XP M.TTG1,*@>,M.TTG1
FILOUT <XP M.DSG0,*@>,M.DSG0
FILOUT <XP M.DSG1,*@>,M.DSG1
FILOUT <XP M.68L0,*@>,M.68L0
FILOUT <XP M.68L1,*@>,M.68L1
SKIPN N,M.KL10 ;ON A KL10 SYSTEM?
JRST NOTKL ;NO, SET M.AT01 TO 0
SKIPN N,M.1091 ;ON A 1091?
JRST NOT191 ;NO, DON'T ASK ABOUT FE TTY'S
ASKDEC <# terminals on the master front end on CPU0(1,1-132)[
include only timesharing (DH11) lines, not CTY or KLINIK]>
NOT191: ADDI N,4 ;ACCOUNT FOR DL11 LINES
NOTKL: ADDM N,M.TTDN
FILOUT <XP M.AT01,*@>,N
FILOUT <XP M.AT11,0@>
FILOUT <XP M.TTDN,*@>,M.TTDN
MOVE N,M.TTG0 ;NUMBER OF 8-LINE GROUPS
ADD N,M.TTG1 ; PLUS NUMBER OF LINES ON DC10 #1
LSH N,3 ;TIMES 8=NUMBER OF LINES
ADD N,M.D70N ;PLUS LINES ON DC76
ADD N,M.D71N
ADD N,M.D72N
ADD N,M.D73N
ADD N,M.D74N
ADD N,M.D75N
ADD N,M.D76N
ADD N,M.D77N
ADD N,M.TTDN ;PLUS LINES ON RSX20F
ADD N,M.68L0 ;PLUS LINES ON DC68
ADD N,M.68L1 ; = TOTAL NUMBER OF LINES
FILOUT <XP M.TLTL,* ;TOTAL LOCAL TTY LINES@@>
ASKOPR: SOJ N, ;ADJUST TO GET HIGHEST LINE
ASKLIN <OPR octal line #(CTY,0-*)[OPR is privileged operator terminal]>
FILOUT <DEFINE OPRLIN>
PUSHJ P,FILLAB
FILOUT <@ OPRL *@>,N
PUSHJ P,FILRAB
FILOUT <@>
ASKTTY: BTHOUT <Answer the following questions about your TTY lines(M-N).
[Type one octal line #(M) or one range(M-N) or CTY on separate
lines. Type extra carriage return when through.]@>
ASKDSD: FILOUT <DEFINE MACDSD> ;START MACRO DEFINITION
ASKMN <Data set lines[Class of terminal for LOGIN, LOGIN resets line
to computer echoing and no hardware tabs]@>
ASKTBS: FILOUT <DEFINE MACTAB> ;START MACRO DEFINITION
ASKMN <Lines with hardware tabs[Monitor simulates rest with spaces]@>
ASKRMT: FILOUT <DEFINE MACRMT> ;START MACRO DEFINITION
ASKMN <Remote lines[Class of terminal for LOGIN, do not confuse
with remote station TTYs]@>
ASKLCP: FILOUT <DEFINE MACLCP> ;START MACRO DEFINITION
ASKMN <Local copy lines[Echoing provided by terminal rather than
by computer. Often (incorrectly) called half duplex]@>
ASKHLF: FILOUT <DEFINE MACHLF> ;START MACRO DEFINITION
ASKMN <Half duplex lines[TWX or half duplex wired scanner(DC10C)]@>
ASKSLV: FILOUT <DEFINE MACSLV>
ASKMN <Slaves[No commands may be typed]@>
ASKFRM: FILOUT <DEFINE MACFRM>
ASKMN <Lines with hardware form feed[Leave out if users
would rather not get form feeds until they do TTY FORM commands]@>
ASKINI: FILOUT <DEFINE MACINI>
ASKMN <Lines which run INITIA at startup@>
ASKFLC: FILOUT <DEFINE MACFLC>
ASKMNP <Filler class codes(M-N,P)[
Type M,P for one line M with filler class code P or
M-N,P for a range of lines with filler class code P]@>
ASKBCD: SKIPE M.DC10 ;IS THERE A DC-10 INTERFACE
JRST ASKBC0 ;(YES) GET 2741 LINES
FILOUT <DEFINE MACDIS<>>
JRST TTYEND ;THAT'S ALL
ASKBC0: FILOUT <DEFINE MACDIS>
ASKMN <2741 lines on DC-10 interfaces[]@>
TTYEND: POPJ P, ;END TTYGEN,RETURN AND CLOSE FILES
;SUBROUTINE TO ASK ABOUT DC10 HARDWARE
;CALL WITH:
; PUSHJ P,[DC10 NUMBER]
; PUSHJ P,ASKDCX
ASKDCX: MOVE N,-1(P) ;PICK UP DC10 NUMBER
TTYOCT <@For DC10 *:@@>
MOVEI N,SM.TTG ;MAX TTY GROUPS
ASKDEC <# DC10B[ or 632] 8 line data groups(1-*)[
1 is TTY0-7, 2 is TTY0 - 17, ... 8 is TTY0 - 77]>
MOVE T1,-1(P) ;STORE FOR CORRECT DC10
MOVEM N,M.TTG0(T1) ; ..
ASKDEC <# DC10E Data set control groups(0-*)>
MOVE T1,-1(P)
MOVEM N,M.DSG0(T1) ;STORE FOR CORRECT DC10
ASKCRR: MOVE N,-1(P) ;WHICH DC10
FILOUT <DEFINE MACCR*>
MOVE T1,-1(P)
SKIPN M.DSG0(T1) ;DATA SETS?
JRST ASKCR1 ;NO, SKIP THIS QUESTION
ASKMNP <Correspondence of DC10E lines to the DC10B lines(M-N,P)[
Type M,P for one pair and M-N,P for a range of pairs
where M is octal DC10E line, M-N is octal range of DC10E
lines, and P is octal DC10B line]@>
POPJ P,0 ;RETURN
ASKCR1: PUSHJ P,FILLAB ;OUTPUT NULL MACRO IF DIDNT ASK
PJRST FILRAB ;FINISH MACRO IF DIDNT ASK
;SUBROUTINE TO ASK ABOUT DC68 LINES
;CALL WITH:
; PUSH P,[DC68 NUMBER]
; PUSHJ P,ASKD68
ASKD68: MOVE N,-1(P)
TTYOCT <@FOR DC68 *:@@>
MOVEI N,SM.68L
ASKOCT <# Octal lines on DC68, including its console TTY(1-*)>
MOVE T1,-1(P)
MOVEM N,M.68L0(T1)
POPJ P,
;SUBROUTINE TO ASK ABOUT A DC76
;CALL WITH
; PUSH P,[DC76 NUMBER]
; PUSHJ P,ASKD76
ASKD76: MOVE N,-1(P)
TTYOCT <@For DC76 *:@@>
ASKDEC <Which DL10 port is the DC76 connected to(0,1-7)[Each PDP-11
is connected to a DL10 port. If there is only one -11 it
is always connected to port 0. If there are 2 -11's one is
connected to port 0 and the other to port 1]>
PUSH P,N
ASKDEC <Decimal lines on DC76(1-129)[
Each DC76F is 16 lines and the console teletype is
one line. A DC76 with 2 DC76Fs has 33 lines]>
MOVE T1,(P)
MOVEM N,M.D70N(T1)
POP P,(P)
POPJ P,0
SUBTTL ASK ROUTINES - ASK QUESTION ON TTY, FILE AND GET ANSWER
;LSTEXP - ROUTINE TO DO LIST OR EXPLAIN MODE FOR FGEN
;CALL: MOVEI N,1 OR 2 FOR LIST OR EXPLAIN
; PUSHJ P,LSTEXP
; RETURNS WHEN DONE
LSTEXP: CAIE N,1 ;SKIP IF LIST, NOT IF EXPLAIN
TLOA F,(F.EXP) ;SET EXPLAIN FLAG FOR EXPLAIN
TLZ F,(F.EXP) ;CLEAR EXPLAIN FLAG FOR LIST
ASKLEX: TTYOUT <Switch(switch to list or explain)[
Type name of switch to be listed or explained or ALL or /HELP.
Type extra carriage return when through.]@@>
LEXLOP: PUSHJ P,TTYIN ;GET SWITCH TYPED
JRST ASKLEX ;/HELP TYPED
JUMPE CH,LEXXIT ;EXIT IF BLANK LINE
PUSHJ P,GETWRD ;GET SWITCH NAME
RJUMPN CH,<MOVE N,WD ;;N=SWITCH NAME TYPED
TTYOUT <? Unknown switch *@>
JRST ASKLEX>
CAMN WD,[SIXBIT .ALL.] ;SKIP IF NOT "ALL"
JRST ALLLEX ;DO ALL SWITCHES IN TABLE AND EXIT
PUSHJ P,LEXSWT ;LIST OR EXPLAIN THIS SWITCH
JRST ASKLEX ;ILLEGAL SWITCH, RETYPE PROMPT
JRST LEXLOP ;OK, WAIT FOR ANOTHER
LEXXIT: MOVE LV,SAVLV ;RESTORE PERMANENT HELP LEVEL
POPJ P, ;AND RETURN
;HERE IF WANT ALL SWITCHES
ALLLEX: HRLZ T1,FTLEN ;AOBJN PTR TO TABLE
ALLLE1: PUSH P,T1 ;SAVE AOBJN PTR
SKIPN WD,@FTTAB ;SKIP IF HAVE A SWITCH HERE
JRST ALLLE2 ;NO, IGNORE IT
TLZ WD,777700 ;CLEAR JUNK
TLO WD,'FT ' ;MAKE SWITCH BE FT...
PUSHJ P,LEXSWT ;LIST OR EXPLAIN THIS SWITCH
JFCL ;IGNORE ERRORS THAT SHOULDN'T HAPPEN
ALLLE2: POP P,T1 ;RESTORE AOBJN PTR
AOBJN T1,ALLLE1 ;LOOP FOR WHOLE TABLE
POPJ P, ;RETURN
;LEXSWT - ROUTINE TO LIST OR EXPLAIN ONE SWITCH
;CALL: MOVE WD,SWITCH NAME
; PUSHJ P,LEXSWT
; RETURN HERE IF UNKNOWN SWITCH
; RETURN HERE IF FOUND, LIST OR EXPLAIN DONE
LEXSWT: HLRZ N,WD ;N=FIRST THREE CHARS
TRZ N,77 ;ONLY LOOK AT FIRST TWO
CAIE N,'FT ' ;SKIP IF FT...
RJRST <MOVE N,WD
TTYOUT <? Unknown switch *@>
POPJ P,>
TLZ WD,777700 ;CLEAR UNWANTED JUNK
RJUMPE WD,<TTYOUT <? Unknown switch@>
POPJ P,>
PUSHJ P,FNDSWT ;FIND SWITCH IN TABLE
MOVE N,WD ;N=SWITCH NAME, WT1=INDEX IN TABLE
TLO N,'FT ' ;ADD BACK "FT"
RJUMPGE T1,<TTYOUT <? Unknown switch *@>
POPJ P,>
PUSH P,N ;SAVE NAME OF SWITCH IN CASE EXPLAINING
SKIPL @FTTAB ;SKIP IF VALUE IS ON
JRST LEXSW1 ;NO, SWITCH IS OFF
TTYOUT <*,-1>
JRST LEXSW2
LEXSW1: TTYOUT <*,0>
LEXSW2: POP P,WD ;RESTORE NAME OF SWITCH TO LOOKUP EXPLANATION
AOS (P) ;OK, GIVE SKIP RETURN AND FINISH UP
TLNE F,(F.EXP) ;SKIP IF LIST, NOT IF EXPLAIN
PJRST LEXSW3 ;DO EXPLAIN
TTYOUT <@>
POPJ P,
;HERE TO EXPLAIN SWITCH
;HERE TO POSITION FGEN HELP FILE AT EXPLANATION FOR THIS SWITCH, WD IS SET UP
LEXSW3: FHLPOS *,LEXSWE
PUSHJ P,FHLPTT ;COPY TO TTY
LEXSWE: TTYOUT <@>
POPJ P, ;RETURN
;FNDSWT - ROUTINE TO FIND A SWITCH IN THE TABLE
;CALL: MOVE WD, SWITCH NAME WITH "FT" CLEARED
; PUSHJ P,FNDSWT
; RETURN N=INDEX OF SWITCH IN TABLE, OR GE 0 IF NOT IN TABLE
FNDSWT: HRLZ T1,FTLEN ;AOBJN PTR TO SWITCH TABLE
FNDSW1: HRLOI N,77 ;N=MASK FOR 4 CHARS
AND N,@FTTAB ;N=NEXT SWITCH NAME IN TABLE
CAME N,WD ;SKIP IF FOUND MATCH
AOBJN T1,FNDSW1 ;NO, TRY NEXT IN TABLE
POPJ P,
;ASKSYS - ROUTINE TO FIND OUT WHAT TYPE OF SYSTEM
;CALL: PUSHJ P,ASKSYS
; RETURN N=INDEX OF TYPE OF SYSTEM
ASKSYS: ASKLST <DECsystem10(1040,1050,1055,1070,1077,1080,1088,1091)[
1040 is small disk system with KA10 cpu
1050 is large disk system with KA10 cpu
1055 is disk system with 2 KA10 cpu's
1070 is disk system with KI10 cpu
1077 is disk system with 2 KI10 cpu's
1080 is disk system with KL10 cpu
1088 is disk system with 2 KL10 cpu's
1091 is disk system with KL10 cpu, internal memory, and
devices on the front end]>
CAILE N,MP.SMX ;IS THIS A PDP10I SYSTEM?
RJRST <MOVEI N,MP.MVN ;MONITOR VERSION NUMBER
TTYOUT <? Not available in * monitor@>,N
JRST ASKSYS>
MOVEM N,CNFIND ;SAVE INDEX OF SYSTEM TYPE
AOS M.1040(N) ;SET ONE OF THE VARIABLES TO 1
; M.1040, M.1050, M.1055, M.1070, M.1077
CAIG N,2 ;IS THIS A PDP10I SYSTEM?
AOSA M.P10 ;NO, SET PDP10 FLAG TO 1
AOS M.P10I ;YES, SET PDP10I FLAG TO 1
CAIE N,6 ;A 1088?
CAIN N,5 ;IS THIS A 1080?
JRST ASKSY1 ;YES
CAIE N,7 ;A 1091?
POPJ P, ;NO, RETURN
ASKSY1: AOS M.KL10 ;SET KL10 FLAG
SETZM M.P10 ;AND CLEAR OTHERS
SETZM M.P10I
POPJ P, ;RETURN
;ASKYN - ROUTINE TO ASK AND ACCEPT A Y OR N ANSWER
; USED WHEN ONLY CHOICE OF PRESENCE OR ABSENCE IS POSSIBLE
;CALL: ASKYN <...(Y,N)[...]>
; RETURN N=1 IF Y, N=0 IF N
; NOTE: (Y,N) MUST BE IN THIS ORDER, SO USER KNOWS DEFAULT ALWAYS IS Y
ASKYN: PUSHJ P,ASKLS1 ;ASK QUESTION, GET ANSWER POSITION IN N
MOVS T1,ASKTAB+0 ;IS FIRST PROMPT
CAIE T1,'Y ' ;Y FOR YES?
JRST ASKYNE ;NO, ERROR
MOVS T1,ASKTAB+1 ;YES, IS SECOND PROMPT
SKIPN ASKTAB+2 ;ARE THERE MORE THAN TWO CHOICES?
CAIE T1,'N ' ;NO, IS IT N?
ASKYNE: RJRST <EREXIT <ASKYN called without (Y,N) in above message>,>
JUMPE N,ASKY ;FIRST ITEM IN LIST(Y)?
;HERE ON N ANSWER
TDZA N,N ;RETURN 0
;HERE ON Y ANSWER
ASKY: MOVEI N,1 ;RETURN 1
POPJ P,
;ROUTINE TO ASK QUESTON WITH PROMPTING ANSWERS IN A LIST IN PARENS
;CALL: ASKLST <...(ANS0,ASN1,ANS2,...)[...]>
; RETURN HERE WITH N=0,1,2,...
; IF JUST CR TYPED, N=0 TO MEAN FIRST ITEM BY DEFAULT
;ABBREVIATIONS ARE ALLOWED LIKE MONITOR COMMANDS
; IF WRONG ANSWER IS GIVEN, THE FOLLOWING ERROR MESSAGE IS TYPED:
; ? ANSWER MUST BE ONE OF (ANS0,ANS1,ANS2,...)
; FOLLOWED BY A REPEAT OF QUESTION IN NEXT LONGEST MODE
;IF A LIST OF PROMPTINGS IS NOT INCLUDED IN PARENS,
; ? INTERNAL MONGEN ERROR - NO CHOICES IN PARENS - EDIT MONGEN
ASKLST: PUSHJ P,ASKLS1 ;ASK AND GET ANSWER
MOVS T1,ASKTAB+0 ;IS FIRST PROMPT
CAIE T1,'Y ' ;Y
CAIN T1,'N ' ; OR N?
JRST ASKLSE ;YES, ERROR SHOULD USE ASKYL INSTEAD
MOVS T1,ASKTAB+1 ;IS SECOND PROMPT
CAIE T1,'Y ' ;Y
CAIN T1,'N ' ;OR N?
ASKLSE: RJRST <EREXIT <ASKLST called with (Y,N) in above question
- Edit MONGEN to call ASKYN instead of ASKLST@>,>
POPJ P, ;RETURN WITH N SET TO POSITION OF ANSWER
;SUBROUTINE TO DO THE WORK OF ASKING AND GETTING ANSWER.
;CALLED BY ASKLST AND ASKYN
ASKLS1: MOVEI R,^D10 ;SET RADIX TO 10(IN CASE * SUBS.)
PUSHJ P,ASKBG ;STANDARD ASK ROUTINE BEGINNING
; SAVE ADR OF QUESTION AND N ON STACK, OUTPUT CRLF
; TO FILE, OUTPUT QUESTION AS COMMENT TO FILE
;LOOP TO ASK QUESTION OVER AGAIN AFTER ERROR OR /HELP
ASKOVR: MOVE N,(P) ;REESTORE ORIGINAL N INCASE THIS IS LOOP
; SO * SUBSTITUTION WILL BE THE SAME
HRRZ T1,-1(P) ;ADR OF MESSAGE
PUSHJ P,TTROUT ;OUTPUT TO TTY
HRRZ T1,-1(P) ;ADR OF ASK MESSAGE
PUSHJ P,SETASK ;SET UP LIST OF CHOICES IN ASKTAB
; FROM SCANNING LIST OF PROMPTINGS
PUSHJ P,TTYIN ;ASK FOR INPUT LINE, OUTPUT TO FILE AS COMMENT
JRST ASKOVR ;/HELP TYPED, REASK IN DESIRED HELP MODE
PUSHJ P,FNDASK ;NO, LOOK FOR HIS ANSWER IN ASKTAB
AOJA LV,ASKOVR ;NOT THERE, ASK QUESTION AGAIN WITH MORE HELP
; BY MAKIN LEVEL ONE HIGHER
JRST ASKXIT ;FOUND, RESTORE LEVEL
; TO THAT BEFORE QUESTION AND RETURN
;ROUTINE TO SCAN MESSAGE FOR PROMPTING ANSWERS
;CALL: MOVEI T1,ADR OF ASCIZ STRING
; PUSHJ P,SETLST
; RETURN ONLY IF ANSWERS IN PARENS FOUND
; ELSE PRINT ? INTERNAL MONGEN ERROR - NO ( IN ABOVE MESSAGE,
; ADD (ANS0,ASN1,ASN2...) TO MONGEN BY EDITING
; B IS PRESERVED
SETASK: HRLI T1,440700 ;FORM LH OF BYTE POINTER
PUSH P,B ;SAVE BYTE POINTER(NOT AN ARGUMENT)
; CALLER MAY HAVE SOMETHING IN IT
PUSH P,N ;SAVE POSSIBLE SUBSTITUTION
;LOOP TO FIND LEFT PAREN
ASK0: ILDB CH,T1 ;GET NEXT CHAR IN ASK MESSAGE
RJUMPE CH,<EREXIT <? No (ANS0,ASN1,...) in above question - Edit MONGEN>,>
CAIE CH,"(" ;LEFT PAREN?
JRST ASK0 ;NO, KEEP LOOKING
MOVEI N,0 ;SET ANSWER INDEX TO 0
MOVE B,T1 ;SETYUP BYTE POINTER TO PROMPTING LIST FOR GETWRD
;LOOP TO BREAK PROMPTING ANSWERS - N=0,1,... FOR EACH ANSWER
ASK2: PUSHJ P,GETWRD ;GET NEXT WORD INSIDE PARENS
CAIE CH,"*" ;SKIP IF WANT SUBSTITUTION
JRST ASK2A ;NO, KEEP CHECKING
JUMPN WD,ASK2E ;JUMP IF SOMETHING PRECEEDED *, ERROR
MOVE WD,(P) ;RESTORE SUBSTITUTION
ASK2A: MOVEM WD,ASKTAB(N) ;ANS STORE ANSWER AWAY
CAILE N,MP.AMX ;MORE THAN MAX. NO. OF ANSWERS FOR MONGEN?
RJRST <EREXIT <Too many prompts in above question - Edit MONGEN@>,>
CAIN CH,"," ;WAS BREAK CHAR A COMMA?
AOJA N,ASK2 ;YES, GO BACK AND GET NEXT PROMPTING WORD
SETZM ASKTAB+1(N) ;CLEAR LAST ARG PLUS 1 AS END FLAG
POP P,N ;RESTORE N
POP P,B ;RESTORE CALLERS BYTE POINTER
CAIN CH,")" ;NO, WAS BREAK RIGHT PAREN?
POPJ P, ;YES, RETURN
ASK3E: EREXIT <Special character inside () above
Edit MONGEN and remove it.>,
ASK2E: EREXIT <Error in above question - Edit MONGEN@>,
;ROUTINE TO FIND ONE OF A LIST OF ANSWERS IN ASKTAB USING ASCIZ STRING
;CALL: MOVE POSSIBLE ANSWERS TO ASKTAB+0,+1,... STORE 0 IN LAST+1
; (SEE SETASK ROUTINE)
; MOVE B,BYTE POINTER TO ASCIZ STRING
; PUSHJ P,FNDASK(BREAK = CR) OR FNDAS1(BREAK = ANY)
; NOT FOUND RETURN, ERROR MESSAGE PRINTED
; OK RETURN, N = POSITION OF ANSWER IN LIST = 0,1,2
; N=0 IF JUST A CR TYPED
; ALLOW 0 IN ASKTAB+0 AS LEGAL ANSWER TO MEAN NO DEFAULT
FNDAS1: PUSHJ P,GETWRD ;GET USER SUPPLIED ANSWER
JRST FNDAS2 ;SKIP CHECK FOR BREAK MUST BE EOL
FNDASK: PUSHJ P,GETWRD ;GET USER SUPPLIED ANSWER
RJUMPN CH,<TTYOUT <? Type one answer followed by carriage return@>
popj p,> ;error return, so ask question again
FNDAS2: TLZ F,(F.MTCH) ;CLEAR MATCH FOUND FLAG
SETZB N,SAVN ;SET ANSWER INDEX TO 0
JUMPE WD,ASK8 ;JUST A CR TYPED?
MOVEI T1,0 ;NO, FORM MASK FOR ABBREVIATION
ASK5: ROT T1,6 ;MOVE MASK LEFT 1 CHAR POSITION
IORI T1,77 ;SET LOW ORDER CHAR MASK
TDNN WD,T1 ;ANY CHARS IN THESE LOW ORDER POSITIONS?
JRST ASK5 ;NO, LOOK AT NEXT CHAR TO LEFT
LSH T1,-6 ;YES, MOVE MASK SO ONLY COVERS CHARS NOT TYPED
MOVE T2,ASKTAB(N) ;GET FIRST POSSIBLE ANSWER. MAYBE 0 IF
; NO DEFAULT ALLOWED, IE (,ANS0,ANS1,...)
;LOOP TO SCAN FOR MATCH WITH PROMPTING ANSWERS STORED IN ASKTAB
ASK6: CAMN T2,WD ;SKIP IF NOT EXACT MATCH
JRST ASK9 ;YES, TAKE THIS IMMEDIATELY
TDZ T2,T1 ;CLEAR OUT CHARS USER DID NOT TYPE
CAME T2,WD ;MATCH THE CHARS HE DID TYPE?
JRST ASK7 ;NO, GO GET NEXT ANSWER
MOVEM N,SAVN ;YES, SAVE ANSWER INDEX
TLOE F,(F.MTCH) ;ALREADY FOUND A MATCH?
RJRST <TTYOUT <? Type enough to uniquely distinguish answer@>
POPJ P,> ;ERROR RETURN
ASK7: SKIPE T2,ASKTAB+1(N) ;GET NEXT PROMPT, IS THERE ONE?
AOJA N,ASK6 ;YES, BUMP ANSWER INDEX
TLNN F,(F.MTCH) ;NO, WAS A MATCH FOUND?
RJRST <TTYOUT <? Answer with one of the choices inside parens@>
POPJ P,> ;ERROR RETURN
ASK8: MOVE N,SAVN ;YES, RETURN THE MATCH INDEX
ASK9: SKIPN ASKTAB(N) ;SKIP IF DEFAULT ALLOWED
RJRST <TTYOUT <? No default allowed@>
POPJ P,>
JRST CPOPJ1 ;GIVE OK RETURN
;ROUTINE TO ASK QUESTION AND GET DECIMAL ANSWER AND CHECK FOR LIMITS
;CALL: ASKDEC <QUESTION(DEFAULT,MIN-MAX)[...]>
; RETURN HERE WITH N AS VALUE OF ANSWER, CR ASSUMES DEFAULT
ASKDEC: MOVEI R,12 ;SET RADIX TO DECIMAL
JRST ASKNUM ;GO ASK QUESTION AND CHECK ANSWER
;ROUTINE TO ASK QUESTION AND GET OCTAL LINE NUMBER OR CTY
;CALL: ASKLIN <QUESTION(DEFAULT,MIN-MAX)[...]>
; RETURN HERE WITH N AS VALUE OR 'CTY', CR ASSUMES DEFAULT
ASKLIN: MOVEI R,10 ;SET RADIX TO OCTAL
TLO F,(F.CTY) ;FLAG THAT CTY IS OK OCTAL NUMBER
JRST ASKNM1 ;ASK QUESTION, ETC
;ROUTINE TO ASK QUESTION AND GET OCTAL ANSWER AND CHECK FOR LIMITS
;CALL: SAME AS ASKDEC, EXCEPT ANSWER CONVERTED AS OCTAL
ASKOCT: MOVEI R,10 ;SET RADIX TO OCTAL
ASKNUM: TLZ F,(F.CTY) ;FLAG THAT CTY IS NOT ACCEPTABLE NUMBER
ASKNM1: PUSHJ P,ASKBG ;STANDARD ASK ROUTINE BEGINNING
; SAVE ADR OF QUESTION AND N ON STACK, OUTPUT CRLF
; TO FILE, OUTPUT QUESTION AS COMMENT TO FILE
;LOOP TO ASK QUESTON AGAIN IF SYNTAX ERROR OR OUT OF RANGE OR /HELP
ASKAGN: MOVE N,(P) ;REESTORE ORIGINAL N IN CASE THIS IS LOOP
; SO * SUBSTITUTION WILL BE THE SAME
HRRZ T1,-1(P) ;ADR OF MESSAGE
PUSHJ P,TTROUT ;ASK USER ON TTY
SETOM DFAULT ;SET DEFAULT TO NONE FOUND YET
; USER CANNOT TYPE IN -1
SETZM MINLIM ;SET MIN LIMIT TO 0
MOVSI T1,'? ' ;SET MAX LIMIT TO BIG POS. NO.
; WHICH WILL ALSO PRINT IF BELOW MIN
MOVEM T1,MAXLIM ;TO VERY BIG NUMBER
HRRZ B,-1(P) ;ADR OF QUESTION
HRLI B,440700 ;FORM BYTE POINTER TO IT
;LOOP TO FIND FIRST PAREN
ASKN0: ILDB CH,B ;GET NEXT CHAR
JUMPE CH,ASKN2 ;ERROR IF END OF STRING FOUND
CAIE CH,"(" ;LEFT PAREN?
JRST ASKN0 ;NO, KEEP LOOKING
;LOOP TO LOOK FOR DEFAULT, MIN AND MAX INSIDE PARENS
ASKN1: PUSHJ P,GETNUM ;GET NUMERIC FIELD
ASKN1B: CAIE CH,"*" ;SKIP IF * FOUND
JRST ASKN1C ;NO, PROCEED
JUMPN N,ASKN2 ;JUMP IF SOMETHING BEFORE THE *
MOVE N,(P) ;PICK UP VALUE FOR SUBSTITUTION
PUSHJ P,SKBLNK ;SKIP TO NEXT TERMINATOR
JRST ASKN1B ;AND LOOP
ASKN1C: CAIN CH,"-" ;DASH TO SEPARATE MIN-MAX
JRST ASKN3 ;YES, FOUND MIN
CAIN CH,"C"+40 ;IS IT LOWER CASE C?
TRC CH,40 ;YES, CONVERT IT
CAIE CH,"C" ;YES, AND IS BREAK A C?
JRST ASKN1A ;NO, GO CHECK OTHER BREAK CHARS
JUMPN N,ASKN2 ;JUMP IF SOMETHING BEFORE THE *
PUSHJ P,GETWRD ;YES, GET REST OF WORD
MOVEI N,'CR ' ;GET READY IF CR TO STORE CR AS DEFAULT
CAME WD,[SIXBIT /R/] ;IS IT R AFTER C?
;YES, STORE DEFAULT CR
TLNN F,(F.CTY) ;NOT CR, IS CTY A LEGAL ANSWER?
JRST ASKN1A ;NO, GO CHECK OTHER BREAKS
CAME WD,[SIXBIT /TY/] ;IS REST OF WORD "TY"?
JRST ASKN2 ;NO, PRINT ERROR
MOVEI N,'CTY' ;STORE ARG AS TYPED
ASKN1A: SKIPGE DFAULT ;ALREADY STORED DEFAULT?
MOVEM N,DFAULT ;NO, STORE DEFAULT, IN CASE JUST TYPES CR
CAIN CH,")" ;IS THIS THE ONLY NUMBER
JRST ASKN4 ;YES, GO GET USER ANSWER
CAIN CH,"," ;IS BREAK A COMMA?
JRST ASKN1 ;YES, GO GET NEXT NUMBER IN LIST
ASKN2: EREXIT <Above question must have(...,min-max) - Edit MONGEN>,
;HERE WHEN MIN FOUND
ASKN3: MOVEM N,MINLIM ;STORE MINIMUM LIMIT
PUSHJ P,GETNUM ;GET NEXT NUMBER
CAIN CH,"?" ;NO MAX SPECIFIED?
JRST ASKN3A ;YES, SET TO INFINITY
CAIE CH,"*" ;NO, IS MAX. SUBSTITUTABLE ARG?
JRST ASKN3B ;NO, GO CHECK FOR RIGHT PAREN
SKIPA N,(P) ;YES, USE VALUE WHICH WAS SUBSTITUTED
ASKN3A: MOVSI N,'? ' ;SET MAX TO PLUS INFINITY
PUSHJ P,SKBLNK ;SKIP TO NEXT NON-BLANK
ASKN3B: CAIE CH,")" ;BETTER BE RIGHT PAREN
JRST ASKN2 ;NO, ERROR
MOVEM N,MAXLIM ;STORE MAX LIMIT
;HERE WHEN FIRST () ALL SCANNED FOR DEFAULT, MIN AND MAX
ASKN4: PUSHJ P,TTYIN ;GET USER ANSWER FROM TTY, OUTPUT TO FILE
; AS COMMENT
JRST ASKAGN ;/HELP TYPED, ASK AGAIN
JUMPE CH,ASKN5 ;JRST CR TYPED?(GO USE DEFAULT IF YES)
PUSHJ P,GETNUM ;NO, GET NUMBER USER TYPED
JUMPE CH,ASKN5A ;END OF STRING?
TLNN F,(F.CTY) ;NO, IS CTY A POSSIBLE OCTAL NUMBER?
RJRST <TTYOUT <? Type single number followed by carriage return@>
AOJA LV,ASKAGN> ;ASK AGAIN AT HIGHER LEVEL
CAIN CH,"C"+40 ;IS IT LOWER CASE C?
TRC CH,40 ;YES, CONVERT IT
CAIE CH,"C" ;YES, WAS BREAK C?
JRST ASKN4A ;NO, PRINT ERROR
JUMPN N,ASKN4A ;ERROR IF SOMETHING PRECEDED C
PUSHJ P,GETWRD ;YES, GET REST OF WORD
CAMN WD,[SIXBIT /TY/] ;IS WORD REST OF CTY?
JRST ASKN4B ;YES, ALLOW IT
CAMN N,[SIXBIT /TY1/];NO, IS REST OF WORD CTY1?
JRST ASKN4C ;YES, ALLOW IT
ASKN4A: RJRST <TTYOCT <? Type octal line number or CTY or CTY1 followed by carriage return@>
AOJA LV,ASKAGN> ;ASK AGAIN AT HIGHER LEVEL
ASKN4B: MOVSI N,'CTY' ;RETURN LEFT JUSTFIED CTY AS OCTAL NO.
JRST ASKN6 ;SKIP RANGE CHECK
ASKN4C: MOVE N,[SIXBIT /CTY1/] ;RETURN LEFT JUSTIFIED CTY1 AS OCTAL NO.
JRST ASKN6 ;SKIP RANGE CHECK
;HERE IF JUST CR TYPED AS ANSWER, USE DEFAULT IF THERE IS ONE
ASKN5: MOVS N,DFAULT ;GET DEFAULT IF ONE SPECIFIED
CAMN N,[SIXBIT /TY1/];WAS DEFAULT CTY1?
JRST ASKN6 ;YES, BY PASS RANGE CHECK
CAME N,[SIXBIT /CR/] ;WAS DEFAULT CR?
CAMN N,[SIXBIT /CTY/] ;WAS DEFAULT CTY?
JRST ASKN6 ;YES, BY PASS RANGE CHECK
MOVSS N ;RESTORE TO UNSWAPPED STATE
RJUMPL N,<TTYOUT <? No default allowed, type a number@>
AOJA LV,ASKAGN> ;ASK AGAIN AT HIGHER LEVEL
;HERE TO CHECK RANGE OF ANSWER
ASKN5A: CAMN N,DFAULT ;SKIP IF NOT DEFAULT VALUE
JRST ASKN6 ;IF DEFAULT NOT IN RANGE, MUST BE SPECIAL TERMINATOR
CAML N,MINLIM ;LESS THAN MIN?
CAMLE N,MAXLIM ;NO, EXCEED MAX?
RJRST <TTYOUT <? Must be in range *>,MINLIM
TTYOUT <-*@>,MAXLIM
AOJA LV,ASKAGN> ;ASK AGAIN AT NEXT LONGER MODE
ASKN6: JRST ASKXIT ;STANDARD ASK EXIT - RESTORE ORIGINAL
; HELP LEVEL, POP QUESTION ADR, AND RETURN
;ROUTINE TO ASK QUESTION AND GET STRING FOR ANSWER
;CALL: ASKSTR <QUESTION*>,X
ASKSTR: PUSHJ P,ASKBG ;STANDARD ASK ROUTINE BEGINNING
; SAVE ADR OF QUESTION AND N ON STACK, OUTPUT CRLF
; TO FILE, OUTPUT QUESTION AS COMMENT TO FILE
;LOOP TO ASK QUESTION OVER AGAIN AFTER REQUEST FOR HELP
ASKST1: MOVE N,(P) ;RESTORE ORIGINAL N IN CASE THIS IS LOOP
; SO * SUBSTITUTION WILL BE THE SAME
HRRZ T1,-1(P) ;ADDRESS OF MESSAGE
PUSHJ P,TTROUT ;TYPE IT ON TTY
PUSHJ P,TTYIN ;WAIT FOR INPUT, OUTPUT TO FILE
; AS COMMENT
JRST ASKST1 ;/HELP TYPED, REASK AT DESIRED HELP MODE
JRST ASKXIT ;COMMON EXIT FROM ASK ROUTINES
; POP OLD N AND QUESTION ADR, RESTORE HELP LEVEL
;ROUTINE TO ASK FOR M-N<EOL> OR M<EOL> ON REPEATED LINES UNTIL BLANK LINE
; SYNTAX AND OUTPUT TO FILE
;CALL: FILOUT <DEFINE MAC???> ;START MACRO DEFINITION IN FILE
; ASKMN <ASK MESSAGE@>
; RETURN WHEN ALL ANSWERS HAVE BEEN CHECKED AND OUTPUT
ASKMN: MOVEI R,^D8 ;ASSUME OCTAL RADIX FOR IO
PUSHJ P,FILLAB ;OUTPUT LEFT ANGLE BRACKET, CRLF TO FILE
; AS BEG OF MACRO DEFINITION
PUSHJ P,ASKBG ;STANDARD ASK ROUTINE BEGINNING
; SAVE ADR OF QUESTION AND N ON STACK, OUTPUT CRLF
; TO FILE, OUTPUT QUESTION AS COMMENT TO FILE
;LOOP TO ASK QUESTION IN CASE OF ERROR OR /HELP
ASKM0: MOVE N,(P) ;RESTORE ORIGINAL N IN CASE THIS IS LOOP
; SO * SUBSTITUTION WILL BE THE SAME
HRRZ T1,-1(P) ;ADR OF MESSAGE
PUSHJ P,TTROUT ;OUTPUT TO TTY
;LOOP TO GET NEXT LINE OF INPUT
ASKMLP: PUSHJ P,TTYIN ;GET TTY LINE
JRST ASKM0 ;/HELP TYPED, ASK AGAIN
JUMPE CH,ASKPXT ;NO, DID HE TYPE A BLANK LINE MEANING ALL DONE?
TLZ F,(F.INFO);
PUSHJ P,GETMN ;NO, SCAN FOR M OR M-N AND STOP ON NON-BREAK
RJUMPN CH,<TTYOCT <? Type octal M-N or M@>
AOJA LV,ASKM0> ;RAISE LEVEL OF VERBOSCITY AND ASK AGAIN
FILSTR <L *@>; ;OUTPUT SAME STRING HE TYPED IN WITH MACRO
; NAME PRECEDING IT SO COMMON CAN
; REDEFINE AS IT PLEASES.
JRST ASKMLP ;AND GO GET NEXT LINE OF INPUT
;ROUTINE TO ASK FOR M-N,P<EOL>, GET REPEATED LINES OF INPUT
; UNTIL BLANK LINE, ANS OUTPUT TO FILE
;CALL: FILOUT <DEFINE MAC???> ;START MACRO DEFINITON IN FILE
; ASKMNP <ASK MESSAGE@>
; RETURN WHEN ALL ANSWERS HAVE BEEN CHECKED AND OUTPUT
ASKMNP: MOVEI R,^D8 ;ASSUME OCTAL RADIX FOR IO
PUSHJ P,FILLAB ;OUTPUT LEFT ANGLE BRACKET, CRLF TO FILE
; AS BEG OF MACRO DEFINITION
PUSHJ P,ASKBG ;STANDARD ASK ROUTINE BEGINNING
; SAVE ADR OF QUESTION AND N ON STACK, OUTPUT CRLF
; TO FILE, OUTPUT QUESTION AS COMMENT TO FILE
;LOOP TO ASK FOR MULTI LINE INPUT AGAIN IN CASE OF ERROR
ASKP0: MOVE N,(P) ;RESTORE ORIGINAL N IN CASE THIS IS LOOP
; SO * SUBSTITUTION WILL BE THE SAME
HRRZ T1,-1(P) ;ADR OF MESSAGE
PUSHJ P,TTROUT ;OUTPUT TO TTY
;LOOP TO GET NEXT LINE OF INPUT
ASKPLP: PUSHJ P,TTYIN ;GET NEXT LINE FROM TTY
JRST ASKP0 ;/HELP TYPED, ASK AGAIN
JUMPE CH,ASKPXT ;NO, BLANK LINE MEANING END
TLO F,(F.INFO)
PUSHJ P,GETMN ;NO, GET M OR M-N
CAIE CH,"," ;IS BREAK A COMMA?
JRST ASKPE ;NO, ERROR, PRINT MESAGE AND ASK AGAIN
PUSHJ P,GETOCT ;GET OCTAL P
JUMPE CH,ASKP1 ;IS THIS END OF STRING?
ASKPE: TTYOUT <? Type octal M-N,P or M,P@>
AOJA LV,ASKP0 ;RAISE LEVEL AND ASK AGAIN
ASKP1: FILSTR <L *@>; ;OUTPUT TO FILE ENTIRE ANSWER WITH MACRO
; NAME PRECEDING IT WHICH COMMON WILL DEFINE
; AS IT PLEASES.
JRST ASKPLP ;AND GO GET ANOTHER LINE OF INTPUT
;ROUTINE TO ASK FOR M-N OR ALL, GET REPEATED LINES OF INPUT
;UNTIL BLANK LINE, AND OUTPUT TO FILE
;CALL: - SEE ASKMN
ASKTMN: MOVEI R,^D8 ;RADIX 8
PUSHJ P,FILLAB ;PUT OUT RIGHT BRACKET
PUSHJ P,ASKBG ;STD BEGINNING
ASKTM0: MOVE N,(P) ;RESTORE N
HRRZ T1,-1(P) ;ADDR OF MSG
PUSHJ P,TTROUT ;OUTPUT TO TTY
ASKTLP: PUSHJ P,TTYIN ;GET LINE OF INPUT
JRST ASKTM0 ;/HELP WAS TYPED
JUMPE CH,ASKPXT ;EXIT IF NULL LINE
PUSHJ P,GETTMN ;GET ANSWERS
RJUMPN CH,<TTYOCT <? Type octal M-N or M@>
AOJA LV,ASKTM0> ;GIVE HIM HELP
FILSTR <KN X,*@>
JRST ASKTLP ;ASK AGAIN
;ROUTINE TO GET M-N OR "ALL"
GETTMN: PUSHJ P,GETOCT ;GET OCTAL NUMBER
CAIN CH,"A" ;SEE IF START OF ALL
JRST GETTM1
CAIE CH,"-" ;CHECK DASH
POPJ P, ;NO - ERROR RETURN
MOVEI CH,"," ;CONVERT TO MAKE MACRO HAPPY
DPB CH,B ;PUT IN STRING
PJRST GETOCT ;GET 2ND AND RETURN
GETTM1: PUSHJ P,GETWRD ;GET REST OF WORD
MOVSI N,'ALL' ;CORRECT ANSWER
CAME WD,[SIXBIT "LL"] ;REMAINDER CORRECT?
MOVEI CH,"A" ;NO - GIVER ERROR
POPJ P, ;RETURN
;ROUTINE TO SETUP ALL ASK ROUTINES
; OUTPUTS CRLF TO FILE, OUTPUT QUESTION AS COMMENT, PUT ADR OF QUESTION ON STACK
; PUT ARG FOR * SUBSTITUTION (N) ON STACK SO QUESTION CAN BE REASKED.
;CALL: MOVEI T1,ADR OF QUESTION
; PUSHJ P,ASKBG
; RETURN HERE WITH T1 ON END OF LIST
ASKBG: EXCH T1,(P) ;SAVE ADR OF MESSAGE ON STACK
PUSH P,N ;SAVE ARG FOR * SUBSTITUTION IN CASE
; OF ERROR AND QUESTION MUST BE REASKED
; COMMON ASK EXIT(ASKXIT) WILL POP THESE OFF
PUSH P,T1 ;SAVE RETURN ON END
PUSHJ P,FCRLF ;OUTPUT CRLF TO FILE
HRRZ T1,-2(P) ;ADR OF QUESTION
PJRST FILCOM ;OUTPUT AS A COMMENT, PUTTING ; IN FRONT
; OF EVERY LINE IN QUESTION
;HERE TO EXIT ASKMN AND ASKMNP
ASKPXT: PUSHJ P,FILRAB ;OUTPUT RIGHT ANGLE BRACKET,CRLF TO FILE
;HERE TO EXIT FROM ALL ASK ROUTINES
ASKXIT: MOVE LV,SAVLV ;RESTORE VERBOSCITY LEVEL BEFORE QUESTION ASKED
; OR AS SET BY /HELP:XXX
POP P,T1 ;THROW AWAY * SUBSTITUTION ARG( AC N)
; N HAS ANSWER IN IT NOW
POP P,T1 ;POP OFF T1
JRST FILOT2 ;CLEAR LF FLAG SO FOLLOWING OUTPUT WONT
; ACCIDENTALLY GET ; IN FRONT. THEN RETURN.
SUBTTL GET ROUTINES - SCAN AND CHECK IN CORE STRINGS
;ROUTINE TO GET OCTAL LINE NUMBER OR "CTY"
;CALL: MOVE B,BYTE POINTER
; PUSHJ P,GETLIN
; ALWAYS RETURN, N=VALUE OR SIXBIT CTY
; STOP IN FIRST NON-OCTAL CHAR OR NON-CTY
; CALLER MUST CHECK FOR LEGAL BREAK CHARACTER
GETLIN: PUSHJ P,GETOCT ;GET OCTAL NUMBER
JUMPN N,CPOPJ ;RETURN IF GOT SOME VALUE
CAIN CH,"C"+40 ;IS IT LOWER CASE C?
TRC CH,40 ;YES, CONVERT IT
CAIE CH,"C" ;IS BREAK "C"?
POPJ P, ;NO, MAYBE 0 OR CR, LET CALLER CHECK
PJRST GETMN1 ;SEE IF REST IS CTY
;ROUTINE TO SYNTAX CHECK M-N OR M FOLLOWED BY ANY BREAK
;CALL: MOVE B,BYTE POINTER
; PUSHJ P,GETMN
; ALWAYS RETURN HERE, BREAK IN CH
GETMN: PUSHJ P,GETOCT ;GET OCTAL LINE NUMBER
CAIN CH,"C"+40 ;IS IT LOWER CASE C?
TRC CH,40 ;YES, CONVERT IT
CAIN CH,"C" ;SKIP IF NOT START OF CTY
JRST GETMN1 ;YES, SEE IF IS CTY
CAIE CH,"-" ;IS BREAK -?
POPJ P, ;NO, LET CALLER CHECK FURTHER
MOVEI CH,"," ;YES, CHANGE TO , SO MACRO WILL ACCEPT
DPB CH,B ;IN OUTPUT FILE
PJRST GETOCT ;GET SECOND OCTAL DIGIT
GETMN1: PUSHJ P,GETWRD ;YES, GET REST OF WORD
MOVSI N,'CTY' ;ASSUME CTY
CAMN WD,[SIXBIT /TY/] ;IS IT REST OF CTY?
JRST NULL ;INSERT A NULL
MOVE N,[SIXBIT /CTY1/] ;ASSUME CTY1
CAMN WD,[SIXBIT /TY1/] ;IS IT REST OF CTY1?
JRST NULL ;INSERT A NULL
MOVEI CH,"C" ;NO, RETURN ORIGINAL BREAK FOR CALLER
; TO GET ERROR WHEN CHECKS IT
POPJ P, ;RETURN, CALLER CHECK FOR BREAK
NULL: TLNN F,(F.INFO) ;ARE WE EXPECTING MORE INFO TO FOLLOW "CTY"?
MOVEI CH,0 ;PUT A NULL IN THE BUFFER
DPB CH,B ; TO BE AN EOL
POPJ P, ;RETURN
;ROUTINE TO GET DECIMAL FROM STRING
;CALL: MOVE B,BYTE POINTER
; PUSHJ P,GETDEC
; ALWAYS RETURN HERE, BREAK IN CR, VALUE IN N
;CALLER MUST CHECK FOR PROPER BREAK
GETDEC: MOVEI R,12 ;SET RADIX TO DECIMAL
PJRST GETNUM ;GET NUMBER
;ROUTINE TO GET OCTAL NUMBER FROM STRING
;SAME CALL AS GETDEC
GETOCT: MOVEI R,10 ;SET RADIX TO OCTAL
; FALL INTO GETNUM
;ROUTINE TO GET NUMBER FROM STRING
;CALL: MOVE R,RADIX
; MOVE B,BYTE POINTER
; PUSHJ P,GETNUM
; ALWAYS RETURN HERE, BREAK IN CH, VALUE IN N
;CALLER MUST CHECK FOR PROPER BREAK, GETNUM STOPS ON FIRST NON-NUMERIC
GETNUM: MOVEI N,0 ;SET VALUE TO 0
PUSHJ P,SKBLNK ;SKIP LEADING BLANKS(SPACES AND TABS)
GETN0: JUMPE CH,CPOPJ ;IS THIS END OF STRING
CAIL CH,"0" ;LESS THAN 0?
CAIL CH,"0"(R) ;LESS THAN RADIX
PJRST SKBLK1 ;YES, RETURN - SKIP TO FIRST NON-BLANK
IMUL N,R ;MULTIPLY OLD NUMBER BY RADIX
ADDI N,-"0"(CH) ;ADD IN VALUE OF THIS CHAR
ILDB CH,B ;GET NEXT CHAR IN STRING
JRST GETN0 ;GET ANOTHER CHAR
;ROUTINE TO GET A WORD FROM AN ASCIZ STRING. FILTERS OUT TAB, SPACE
; STOPS ON ANY NON-ALPHA NUMERIC, EXCEPT DOT, CALLER MUST CHECK FOR LEGAL BREAK
;CALL: MOVE B,BYTE POINTER
; PUSHJ P,GETWRD
; RETURN WITH SIXBIT WD LEFT JUSTIFIED, BREAK IN CH
GETWRF: PUSH P,[PUSHJ P,FHLPRC] ;INSTRUCTION TO GET NEXT CHAR
JRST GETWR1 ;READ ASCIZ STRING FOR SIXBIT
GETWRD: PUSH P,[ILDB CH,B] ;INSTRUCTION TO GET NEXT CHAR
GETWR1: PUSHJ P,GETSKB ;SKIP LEADING BLANKS(SPACES, TABS)
MOVEI WD,0 ;SET WORD TO 0 FOR RETURN
MOVE T1,[XWD 440600,WD] ;SET SIX BIT BYTE POINTER TO WD
;LOOP TO ACCUMULATE AFTER LEADING SPACES AND TABS
GETWLP: JUMPE CH,GETWX1 ;END OF STRING?
TLNN F,(F.PER) ;ARE PERIODS ALLOWED IN NAMES?
JRST GETWD1 ;NO, (MUST BE SCANNING FILE NAMES)
CAIN CH,"." ;PERIOD(CAN BE PART OF SYMBOL)
JRST GETWD3 ;YES, ACCEPT AS PART OF SYMBOL
GETWD1: CAIL CH,"0" ;LESS THAN 0?
CAILE CH,"9" ;LESS THAN OR EQUAL TO 9?
JRST GETWD2 ;YES, SEE IF LETTER?
JRST GETWD3 ;NO, NUMBER, STORE
;HERE IF NOT NUMBER
GETWD2: CAIL CH,"A"+40 ;LOWER CASE?
TRC CH,40 ;YES, CONVERT TO UPPER CASE
CAIL CH,"A" ;LESS THAN A
CAILE CH,"Z" ;LESS THAN OR EQUAL TO Z?
PJRST GETWRX ;SKIP TRAILING BLANKS TO FIRST NON-BLANK
; AND RETURN TO CALLER
;HERE IF A LETTER OR NUMBER - CONVERT TO SIXBIT AND STORE
GETWD3: SUBI CH,40 ;CONVERT TO SIXBIT
TLNE T1,770000 ;OVERFLOWED WD YET?
IDPB CH,T1 ;NO, STORE NEXT SIXBIT CHAR
XCT (P) ;GET NEXT CHAR
JRST GETWLP ;AND CHECK IT
GETWRX: PUSHJ P,SKBLK1 ;RETURN FIRST NON-BLANK AFTER TRAILING SPACES
GETWX1: POP P,(P)
POPJ P,
GETSKB: XCT -1(P) ;GET NEXT CHAR
GETSK1: CAIE CH," " ;SPACE?
CAIN CH," " ;TAB?
JRST GETSKB ;YES, GET NEXT CHAR
POPJ P, ;NO, FOUND NON-BLANK
;ROUTINE TO GET TTY LINE, AND SCAN FOR DEV:PI
; WHERE DEV IS 3 CHAR OR LESS AND PI IS # FOR 0-7
;CALL: PUSHJ P,GETDPI
; ERROR RETURN, /HELP , DEV TOO LONG, OR PI TOO BIG
; OK RETURN, BREAK IN CH, WD=0 IF JUST CR TYPED
GETDPI: PUSHJ P,TTYIN ;GET NEXT LINE
POPJ P, ;/HELP TYPED, REASK IN DESIRED HELP MODE
MOVEI WD,0 ;SET JUST CR TYPED INDICATION
JUMPE CH,CPOPJ1 ;JUST A BLANK LINE?
PUSHJ P,GETWRD ;NO, GET FIRST WORD
JUMPE WD,ASKDPE ;ARE THERE ANY CHAR IN DEVICE NAME?
CAIE CH,"," ;IS BREAK CHAR COMMA?
POPJ P, ;NO, ERROR
TRNE WD,777777 ;IS DEVICE 3 CHAR OR LESS?
ASKDPE: RJRST <TTYOUT <? Device-mnemonic must be 3 char or less@>
POPJ P,> ;GO TRY AGAIN
PUSHJ P,GETDEC ;GET PI NO.
CAILE N,SM.PI ;LEGAL PI?
RJRST <MOVEI N,SM.PI ;GET MAXIMUM LEGAL PI
TTYOUT <? PI-channel must be * or less@>
POPJ P,> ;GO TRY AGAIN
JRST CPOPJ1 ;YES, GIVE LEGAL RETURN
;ROUTINE TO SKIP LEADING BLANKS(SPACES AND TABS)
;CALL: MOVE B,BYTE POINTER
; PUSHJ P,SKBLNK OR SKBLK1 IF FIRST CHAR ALREADY IN CH
; FIRST NON-BLANK RETURNED IN CH
SKBLNK: ILDB CH,B ;GET NEXT CHAR
SKBLK1: CAIE CH," " ;SPACE?
CAIN CH," " ;TAB?
JRST SKBLNK ;YES, GET NEXT CHAR
POPJ P, ;NO, RETURN WITH FIRST NON-BLANK IN CH
SUBTTL FGEN AUXILIARY HELP FILE ROUTINES
;ROUTINE TO OUTPUT FROM THE AUXILIARY FILE TO TTY
FHLPTT: PUSH P,[PUSHJ P,FHLPRC] ;INSTRUCTION TO GET NEXT CHAR TO OUTPUT
MOVSI N,'* ' ;EASY WAY TO MAKE SURE * COMES OUT RIGHT
JRST TTYOLP ;TYPE OUT STRING
;ROUTINE TO OUTPUT FROM THE AUXILIARY FILE TO THE OUTPUT FILE
;CALL: PUSHJ P,FHLPFC TO OUTPUT AS A COMMENT
; PUSHJ P,FHLPFL TO OUTPUT AS TEXT
FHLPFC: TLO F,(F.COM) ;NOTE OUTPUT AS A COMMENT
FHLPFL: PUSH P,[PUSHJ P,FHLPRC] ;INSTRUCTION TO GET NEXT CHAR TO OUTPUT
MOVSI N,'* ' ;EASY WAY TO MAKE SURE * COMES OUT RIGHT
JRST FILOLP ;OUTPUT TO FILE
;ROUTINE TO POSITION THE AUXILIARY FILE
;CALL: MOVE WD,SIXBIT TEXT TO FIND
; PUSHJ P,FHLPOS
; ERROR RETURN - CANT FIND IT
; OK RETURN - FILE POSITIONED AFTER TAB
;
; NOTE LOOKS FOR TERMINATOR FIRST, TO BE FOLLOWED IMMEDIATELY BY TEXT IN WD
FHLPOA: TLZA F,(F.FHLC) ;NOTE DONT WANT TAB AFTER TEXT
FHLPOS: TLO F,(F.FHLC) ;NOTE LOOKING FOR A TAB AFTER TEXT
TLZ F,(F.HRRD) ;CLEAR REREADING FLAG
FHLPS0: PUSHJ P,FHLPRD ;READ NEXT CHAR FROM AUX FILE
FHLPS3: JUMPL CH,FHLPEF ;JUMP IF END OF AUX FILE
JUMPN CH,FHLPS0 ;LOOK FOR TERMINATOR
FHLPS1: MOVE T1,[POINT 6,WD] ;BYTE PTR FOR DESIRED STRING
FHLPS2: TLNN T1,770000 ;SKIP IF NEED MORE CHARS TO MATCH
JRST FHLPFN ;FOUND WHAT WAS DESIRED
ILDB N,T1 ;N=NEXT CHAR NEEDED (IN SIXBIT)
JUMPE N,FHLPFN ;JUMP IF THAT'S ALL THATS NEEDED
PUSHJ P,FHLPRD ;GET NEXT CHAR FROM AUX FILE
JUMPL CH,FHLPEF ;JUMP IF END OF FILE
JUMPE CH,FHLPS1 ;IF TERMINATOR, START LOOKING AGAIN
CAIL CH,140 ;SKIP IF NOT LOWER CASE
SUBI CH,40 ;MAKE UPPER CASE FOR COMPARISON
CAIE N,' '-" "(CH) ;SKIP IF THIS CHAR MATCHES
JRST FHLPS0 ;NO, MOVE TO NEXT TERMINATOR
JRST FHLPS2 ;YES, KEEP ON
;HERE IF FOUND END OF AUX FILE
FHLPEF: TLNE F,(F.FHLC) ;SKIP IF NOT LOOKING FOR TAB AFTER TEXT
TLOE F,(F.HRRD) ;SKIP IF NOT ALREADY REREADING THE FILE
POPJ P, ;CANT FIND DESIRED STRING
TLZ F,(F.HOPN) ;CLEAR OPEN FLAG TO RESTART AT BEGINNING OF FILE
JRST FHLPS0 ;NO, MAY HAVE STARTED PAST THE PLACE
;HERE WHEN FILE POSITIONED AS REQUESTED
FHLPFN: TLNN F,(F.FHLC) ;SKIP IF LOOKING FOR TAB AFTER STRING
JRST CPOPJ1 ;NO, ALL SET
FHLPF1: PUSHJ P,FHLPRD ;SKIP TO TAB
JUMPLE CH,FHLPS3 ;JUMP IF TERMINATOR FOUND
CAIE CH," " ;SKIP IF FOUND TAB
JRST FHLPF1 ;KEEP ON
JRST CPOPJ1 ;GIVE GOOD RETURN
;THIS ROUTINE READS A CHAR FROM THE AUXILIARY HELP FILE FOR MESSAGES
FHLPRC: PUSHJ P,FHLPRD ;GET NEXT CHAR
JUMPGE CH,CPOPJ ;OK IF REAL CHAR
SETZ CH, ;TURN EOF INTO END OF STRING
POPJ P,
;ROUTINE TO READ NEXT CHAR FROM FGEN AUXILIARY HELP FILE
FHLPRD: TLNE F,(F.HOPN) ;SKIP IF HELP FILE IS NOT YET OPEN
JRST FHLPR1 ;ALREADY OPEN, GO AHEAD
INIT FHLPCH,0
FGDEV: SIXBIT .SYS.
XWD 0,FHIBUF
JRST FHLPE1 ;CANT INIT SYS?
MOVE CH,FGPPN ;PPN FOR HELP FILE
MOVEM CH,FHNAME+3 ;STORE FOR LOOKUP
LOOKUP FHLPCH,FHNAME ;LOOKUP FILE
JRST FHLPE1 ;CANT FIND FILE
TLO F,(F.HOPN!F.HRRD) ;NOTE OPEN AND ON SECOND PASS
PUSH P,.JBFF## ;SAVE JOBFF
MOVEI CH,FHLPBF ;ADDR OF FHELP FILE BUFFERS
MOVEM CH,.JBFF ;SET UP TO ALLOCATE BUFFERS
INBUF FHLPCH,NFHLPB ;ALLOCATE INPUT BUFFERS
POP P,.JBFF ;RESTORE JOBFF
FHLPR1: SETZ CH, ;CLEAR CH IN CASE ERROR IN IN SUBROUTINE
SOSG FHIBUF+2
PUSHJ P,[IN FHLPCH,
POPJ P,
JRST FHLPER]
JUMPL CH,CPOPJ ;GIVE UP IF ERROR READING
ILDB CH,FHIBUF+1 ;GET NEXT CHAR
JUMPE CH,FHLPR1 ;IGNORE NULLS
CAIN CH,C.RUB ;AND RUBOUTS
JRST FHLPR1
CAIL CH,175 ;DO THE ALTMODE THING
MOVEI CH,C.ESC
CAIN CH,C.TMFH ;SKIP IF NOT OUR TERMINATOR
SETZ CH, ;RETURN 0 FOR TERMINATOR FOR CONVENIENCE
POPJ P,
FHLPER: TLZ F,(F.HOPN) ;CLEAR OPEN FLAG
RELEASE FHLPCH,
FHLPE1: SETO CH,
POPJ P,
SUBTTL TTY INPUT ROUTINES
;ROUTINE TO ACCEPT 1 LINE FROM TTY, MOVE IT TO ASCSTR
;REMOVE EOLS, AND COMMENTS, AND ADD A NULL TO MAKE IT ASCIZ
; LOOK FOR /H AND HANDLE IT
;OUTPUT LINE WITH PRECEDING ; TO FILE
;CALL: PUSHJ P,TTYIN
; NON SKIP RETURN IF USER TYPES /HELP, CALLER MUST REASK QUESTION
; LEVEL SET AS USER WISHES IN LV FOR THIS QUESTION,
; AND IN SAVLV FOR FUTURE
; SKIP RETURN WITH B SETUP AS BYTE POINTER TO BEG OF STRING
; CH = 0 IF JUST A BLANK LINE TYPED
; N = NUMBER OF CHARACTERS NOT COUNTING EOLS OR NULLS
; B = BYTE POINTER TO STRING JUST READ IN
TTYIN: TLO F,(F.COM) ;FLAG OUTPUT TO FILE AS COMMENTS SO ALL
; CALLS TO FILOUT WILL PUT PRECEDING ;
PUSHJ P,TTYGET ;GET NEXT CHAR, OUTPUT TO FILE, SKIP COMMENTS, EOL=0
MOVEI N,0 ;SETUP LENGTH OF STRING TO 0
MOVE B,[XWD 440700,ASCSTR] ;BYTE POINTER
;LOOP TO COPY CHARS FROM TTY TO CORE BUFFER(ASCSTR)
TTYINB: IDPB CH,B ;STORE AWAY
JUMPE CH,TTYINC ;IF EOL CHAR, RETURN
PUSHJ P,TTYGET ;GET NEXT CHAR
CAIGE N,MP.LMX ;LESS THAN MAX LINE LENGTH?
; ASCSTR ALWAYS HAS ROOM FOR NULL
TLZ F,(F.COM) ;CLEAR FLAG FOR FILE COMMENTS
AOJA N,TTYINB ;YES, OK TO STORE NEXT CHAR
TTYOUT <? Line too long@>
AOJA LV,FILOT2 ;INCREASE LEVEL BY 1 FOR THIS QUESTION
; AND PRETEND /HELP TYPED BY GIVING NO-SKIP
; RETURN SO CALLER WILL REASK QUESTION
;HERE WHEN STRING ALL STORED IN CORE BUFFFER
TTYINC: TLZ F,(F.COM) ;CLEAR FLAG FOR FILE COMMENTS
MOVE B,[XWD 440700,ASCSTR] ;BYTE POINTER TO CORE BUFFER
PUSHJ P,SKBLNK ;SKIP BLANKS(SPACE, TAB)
CAIN CH,"/" ;IS FIRST NON-BLANK A SLASH?
JRST TTYINH ;YES, GO DO /HELP
MOVE B,[XWD 440700,ASCSTR] ;SETUP BYTE POINTER TO
; BEG OF CORE BUFFER FOR CALLER
TLZ F,(F.COM) ;CLEAR COMMENT FLAG
JRST CPOPJ1 ;GIVE NON-HELP RETURN
;HERE ON LEADING / FROM TTYIN ROUTINE - SEE IF /HELP
; REST OF INPUT LINE ALEADY COPIED TO FILE AND CORE BUFFER(ASCSTR)
; OK TO DESTROY ASKTAB+0,... SINCE GOING TO GIVE NON-SKIP RETURN
TTYINH: PUSH P,N ;SAVE CCALLERS N IN CASE * SUBSTITUTION
; WHEN QUESTION REASKED
MOVEI T1,[ASCIZ /(HELP)/] ;SETUP ONLY CHOICE AS IF PROMPT
PUSHJ P,SETASK ;IN CHOICES TABLE(ASKTAB)
PUSHJ P,FNDAS1 ;SCAN CHARS AFTER / TO SEE IF HELP
; OR ABBREV(ALLOW ANY BREAK)
AOJA LV,TTYIH1 ;NO, GIVE HIM HELP WITH HELP
; AT NEXT LONGER HELP LEVEL
PJUMPE CH,RAISE1 ;IS BREAK EOL?(IF YES, JUST INCREASE
; LEVEL OF VERBOSCITY BY 1 FOR THIS QUESTION
; BY ADDING TO LV BUT NOT TO SAVLV
CAIE CH,":" ;IS BREAK COLON?
AOJA LV,TTYIH1 ;NO, ASK HELP QUESTION
; AT NEXT LONGER MODE
MOVEI T1,[ASCIZ /(,SHORT,PROMPT,LONG)/] ;SETUP UP CHOICES TO /HELP:
; N=0 MEANS JUST CR TYPED
PUSHJ P,SETASK ;IN ASKTAB+0,1,...
PUSHJ P,FNDASK ;FIND THE ONE HE TYPED
AOJA LV,TTYIH1 ;NOT FOUND, INCREASE HELP LEVEL
JUMPE N,RAISE1 ;DID HE TYPE JUST CR?
; IF YES, JUST INCREASE LEVEL FOR THIS QUESTION
SUBI N,2 ;NO, FORM -1,0,1 FOR SHORT,PROMPT,LONG
TLZ F,(F.COM) ;CLEAR COMMENT FLAG
JRST HELP0 ;GO STORE NEW PERMANENT HELP LEVEL
;HERE TO RAISE LEVEL 1 FOR THIS QUESTION ONLY
RAISE1: TLZ F,(F.COM) ;CLEAR COMMENT FLAG
AOJA LV,HELP1 ;INCREMENT LEVEL BY ONE, BUT DO NOT
; REMEMBER IN MEMORY(SAVLV)
; AND RETURN
TTYIH1: TLZA F,(F.COM) ;CLEAR COMMENT FLAG AND GO TO TTYHP1
;ROUTINE TO TYPE HELP QUESTION
; CALLED AT BEGINNING ONCE ONLY AND WHENEVER /HELP:XXX MISTYPED
;CALL: PUSHJ P,TTYHLP
TTYHLP: PUSH P,N ;SAVE CALLER N INCASE * SUBSTITUTION
; WHEN QUESTION REASKED
TTYHP1: MOVEI N,MP.MVN ;MONITOR VERSION NUMBER FOR THIS MONGEN
; TELL USER SO HE GETS PROPER MONGEN
ASKLST <MONGEN for * monitors
/HELP(PROMPT,SHORT,LONG)[
All # are decimal unless stated otherwise
Unique abbrivation allowed everywhere to all questions
/HELP reasks a question in next longer mode
/HELP:xxx sets mode permanently. Modes are:
SHORT is short
PROMPT has choices in ()
LONG has choices in () and explanation in []]>
CAIN N,1 ;ANSWER 1(SHORT)
SETOM N ;YES, SET LEVEL TO SHORT
CAIN N,2 ;ANSWER 2(LONG)?
MOVEI N,1 ;YES, SET LEVEL TO LONG
;HERE TO STORE NEW PERMANENT HELP LEVEL
HELP0: MOVEM N,SAVLV ;SET PERMANENT LEVEL OF HELP
MOVE LV,N ;SET CURRENT LEVEL TO THE SAME
HELP1: POP P,N ;RESTORE ORIGINAL N(IN CASE THIS
; IS HELP IN MIDDLE OF A QUESTION)
POPJ P, ;GIVE NON-SKIP RETURN SO QUESTION
; WILL BE REASKED
;ROUTINE TO GET ONE CHAR FROM TTY, CHECK FOR EOLS, PUT CHAR IN FILE
; AND SKIP OVER COMMENTS. ALSO CHECK FOR /HELP
TTYGET: PUSHJ P,TTYGT1 ;GET NEXT CHAR FROM TTY AND PUT IN FILE
POPJ P, ;IT WAS AN EOL, RETURN, F.COM CLEARED
CAIE CH,";" ;NO, WAS IT ";" FOR A COMMENT?
POPJ P, ;NO, RETURN
;LOOP TO THROW AWAY COMMENTS USER TYPED IN AFTER ANSWER
TTYGT0: PUSHJ P,TTYGT1 ;YES, GET NEXT CHAR
POPJ P, ;IT WAS AN EOL, RETURN WITH F.COM CLEARED
JRST TTYGT0 ;NOT AN EOL, THROW IT AWAY AND GET NEXT CHAR
;ROUTINE TO GET ONE CHAR FROM TTY, CHECK FOR EOL, PUT CHAR IN FILE
;CALL: PUSHJ P,TTYGT1
; EOL RETURN CH=0, F.COM CLEARED(MAKE FILE OUTPUT NO LONGER BE COMMENTS)
; NOT AN EOL RETURN, CH IS CHAR
TTYGT1: SOSG TIBUF+2 ;DECREMENT INPUT TTY BUFFER COUNT
RJRST <IN TTYCHN, ;GET NEXT BUFFER FROM MONITOR
JRST TTYGT2 ;NO ERRORS
STATO TTYCHN,IO.EOF ;END OF FILE ON TTY?
JRST TTYGT2 ;NO, IGNORE ERROR
JRST TTYZ> ;YES, SET CONTROL Z FLAG
TTYGT2: ILDB CH,TIBUF+1 ;GET NEXT CHAR FROM BUFFER
JUMPE CH,TTYGT1 ;IS IT NULL?
CAIE CH,C.RUB ;IGNORE RUBOUTS
CAIN CH,C.CR ;IS IT CR?
JRST TTYGT1 ;YES, SKIP
CAIL CH,C.LF ;LESS THAN LINE FEED?
CAILE CH,C.CR ;NO, LESS THAN CARRIAGE RETURN?
SKIPA ;NO, NOT AN EOL
JRST TTYEOL ;YES, CONSIDER AS EOL
CAIE CH,C.ESC ;ESCAPE?
CAIL CH,C.ALT1 ;OLD ALTMODE?
JRST TTYEOL ;YES, TREAT AS EOL
CAIE CH,C.CONC ;CONTROL C?
CAIN CH,C.CONZ ;CONTROL Z?
JRST TTYZ ;YES, SET FLAG(OLDER MONITORS STORE ^Z IN BUFFER)
PUSHJ P,FILPUT ;STORE CHAR IN FILE
JRST CPOPJ1 ;AND SKIP RETURN
;HERE WHEN CONTROL Z SEEN OF END OF FILE SET ON TTY
TTYZ: CLOSE TTYCHN, ;TURN OFF EOF FOR TTY
; CLEAR EOF SO CAN DO MORE INPUTS
TLO F,(F.CONZ) ;FLAG CONTROL Z SEEN
TTYEOL: PUSHJ P,FCRLF ;OUTPUT CRLF TO FILE
MOVEI CH,0 ;RETURN 0 AS EOL CHAR
POPJ P, ;GIVE EOL RETURN
SUBTTL OUTPUT ROUTINES - TTY AND FILE
;ROUTINE TO TYPE INTERNAL MONGEN ERROR ON TTY AND FILE, THEN EXIT TO MONITOR
;USE TTCALL IN CASE TTY COULD NOT BE INITED
;CALL: EREXIT <MESSAGE>,
EREXIT: PUSH P,T1 ;SAVE ADR OF MESSAGE
OUTSTR [ASCIZ /
? Internal MONGEN error - /]
OUTSTR (T1) ;THE CALLERS MESSAGE
FILOUT <@? Internal MONGEN error - >
POP P,T1 ;RESTORE MESSAGE ADR
PUSHJ P,FILOUT ;OUTPUT TO FILE
EXIT ;EXIT TO MONITOR
;ROUTINE TO OUTPUT TO FILE IN DECIMAL AND SUBSTITUTE FOR *
;CALL: MOVEI T1,ADR OF MESSAGE
; PUSHJ P,FILDEC
; ALWAYS RETURN HERE, N PRESERVED
FILDC2: TLO F,(F.2DEC) ;ASK FOR AT LEAST TWO CHARS OUTPUT
FILDEC: MOVEI R,12 ;SET RADIX TO DECIMAL
PJRST FILOT1 ;DO OUTPUT AND SUBSTITUTION
;ROUTINE TO OUTPUT TO FILE AND SUBSTITUTE FOR *
; VALUE OR SIXBIT IN N
;CALL: MOVEI T1,ADR OF ASCIZ STRING TO OUTPUT
; MOVE N,NUMBER OR LEFT JUSTIFIED SIXBIT
; PUSHJ P,FILOUT
; ALWAYS RETURN HERE, N PRESERVED
FILCOM: TLOA F,(F.COM) ;SET FLAG TO PRECEDE ALL LINE WITH ;
; AS A COMMENT IN FILE
FILOUT: MOVEI R,10 ;SET OUTPUT RADIX TO OCTAL FOR MACRO
FILOT1: HRLI T1,440700 ;FORM LH OF BYTE POINTER
PUSH P,[ILDB CH,T1] ;INSTRUCTION TO GET NEXT CHAR
FILOLP: XCT (P) ;GET NEXT CHAR IN OUTPUT MESSAGE
PJUMPE CH,FILT2A ;RETURN IF END OF STRING
CAIN CH,"*" ;NOT EOS, IS IT ASTERISK?
PUSHJ P,EITAST ;YES, SUBSTITUTE N FOR IT
PUSHJ P,FILPUT ;ARG TO EITAST OR OUTPUT CHAR
JRST FILOLP ;LOOP AND GET NEXT CHAR
;HERE ON END OF STRING
FILT2A: POP P,(P) ;REMOVE INSTRUCTION FROM STACK
FILOT2: TLZ F,(F.COM!F.2DEC) ;NOW CLEAR FLAG SO NEXT CALLER CAN USE
; FILOUT OR FILCOM WITHOUT HAVING TO SET OR CLEAR
; TO INDICATE COMMENT OR NOT
POPJ P, ;RETURN
;ROUTINE TO OUTPUT TO BOTH FILE AND TTY
; SUBSTITUTE FOR * VALUE OR SIXBIT IN N, PRECEDE EACH
; LINE IN FILE WITH ; SO A COMMENT
;CALL: MOVEI T1,ADR OF ASCIZ STRING
; PUSHJ P,BTHOUT FOR DECIMAL OR BTHOCT FOR OCTAL
; ALWAYS RETURN HERE, N PRESERVED
BTHOCT: SKIPA R,[EXP 10] ;OCTAL RADIX
BTHOUT: MOVEI R,12 ;OCTAL OUTPUT FOR FILE
PUSH P,T1 ;SAVE ADR OF ASCIZ MESSAGE
PUSHJ P,FILCOM ;OUTPUT TO FILE AS A COMMENT
POP P,T1 ;RESTORE ADR OF MESSAGE AND
; FALL INTO TTYOUT
;ROUTINE TO OUTPUT TO TTY IN DECIMAL
; SUBSTITUTE FOR * VALUE OR SIXBIT IN N
; OUTPUT INSIDE PARENS AND BRACKETS DEPENDING ON HELP LEVEL
;CALL: MOVEI T1,ADR OF ASCIZ STRING
; PUSHJ P,TTYOUT
; ALWAYS RETURN HERE, N PRESERVED
TTYOCT: MOVEI R,10 ;OCTAL RADIX(RARE) FOR TTY
JRST TTROUT ;GO DO REST OF TTYOUT
TTYOUT: MOVEI R,12 ;SET RADIX TO DECIMAL FOR PEOPLE
TTROUT: HRLI T1,440700 ;FORM LH OF BYTE POINTER
PUSH P,[ILDB CH,T1] ;INSTRUCTION TO GET NEXT CHAR
TTYOLP: XCT (P) ;GET NEXT CHAR INTO CH
PJUMPE CH,TTYNOW ;IF EOL, FORCE OUT TTY NOW
CAIN CH,"[" ;LEFT BRACKET?
TLO F,(F.LBRK) ;YES, FLAG INSIDE EXPLANATION
TLNE F,(F.LBRK) ;ARE WE INSIDE AN EXPLANATION?
JUMPLE LV,TTYSBK ;YES, IS HELP LEVEL SHOR OR PROMPT?
CAIN CH,"(" ;NO, LONG MODE, IS THIS CHAR LEFT PAREN?
TLO F,(F.LPAR) ;YES, FLAG INSIDE PROMPTING
TLNE F,(F.LPAR) ;ARE WE INSIDE PROMPTING?
JUMPL LV,TTYSPR ;YES, IS HELP LEVEL SHORT?
;HERE IF HELP LEVEL PERMITS THESE CHARS TO BE OUTPUT
CAIN CH,"*" ;NO, IS IT ASTRISCK?
PUSHJ P,EITAST ;YES, SUBSTITUTE N FOR IT
PUSHJ P,TTYPUT ;ARG TO EITAST OR OUTPUT CHAR ROUTINE
;HERE TO SUPPRESS PROMPTING INSIDE PARENS(SHORT MODE ONLY)
TTYSPR: CAIN CH,")" ;WAS CHAR JUST OUTPUT RIGHT PAREN?
TLZ F,(F.LPAR) ;YES, CLEAR INSIDE PROMPTING FLAG
;HERE TO SUPPRESS EXPLANATION INSIDE BRACKETS(SHORT AND PROMPT MODES)
TTYSBK: CAIN CH,"]" ;WAS CHAR JUST OUTPUT RIGHT BRACKET?
TLZ F,(F.LBRK) ;YES, CLEAR INSIDE EXPLANATION
JRST TTYOLP ;LOOP AND GET NEXT CHAR
;ROUTINE TO SUBSTITUTE FOR * IN OUTPUT TO FIL OR TTY USING N
;CALL: MOVE N,[SIXBIT / /] OR DECIMAL NUMBER
; MOVEI R,RADIX
; MOVE T1,BYTE POINTER
; CAIN CH,"*"
; PUSHJ P,EITAST
; PUSHJ P,FILPUT OR TTYPUT
; RETURN HERE WITH T1 AND N PRESERVED
EITAST: PUSH P,T1 ;SAVE BYTE POINTER TO STRING
TLNN N,770000 ;DOES N HAVE A SIXBIT ARG?
JRST EITAS2 ;NO, OUTPUT AS A NUMBER
;HERE TO OUTPUT N AS SIXBIT FOR *
MOVE WD,[XWD 440600,N] ;SETUP BYTE POINTER TO SIXBIT ARG
EITAS1: ILDB CH,WD ;GET NEXT SIXBIT CHAR
JUMPE CH,TPOPJ1 ;IS IT END OF SIXBIT?
ADDI CH,40 ;CONVERT TO ASCII
XCT @-1(P) ;OUTPUT CHAR TO TTY OR FIL ACCORDING
; TO ARG IN CALLING SEQUENCE
TLNE WD,770000 ;BYTE POINTER EXHAUSTED WD?
JRST EITAS1 ;NO, KEEP GETTING SIXBIT CHARS
JRST TPOPJ1 ;YES, RETURN
;HERE TO CONVERT N AND OUTPUT ACCORDING TO CURRENT RADIX
EITAS2: MOVE WD,@-1(P) ;GET ADR OF CHAR PUT ROUTINE FOR TTY OR FILE
; (TTYPUT OR FILPUT)
MOVE T1,N ;MOVE NO. TO DOUBLE AC
CAIG N,^D9 ;SKIP IF GREATER THAN TWO CHARS
TLNN F,(F.2DEC) ;ONE CHAR, SKIP IF WANT AT LEAST TWO
JRST EITAS3 ;GO AHEAD AS PLANNED
MOVEI CH,"0" ;OUTPUT LEADING ZERO
PUSHJ P,(WD) ;OUTPUT IT
EITAS3: PUSHJ P,EITSUB ;CALL RECURSIVE OUTPUT ROUTINE
TPOPJ1: POP P,T1 ;RSTORE BYTE POINTER
CPOPJ1: AOS (P) ;SET FOR SKIP RETURN
CPOPJ: POPJ P, ;RETURN
EITSUB: IDIVI T1,(R) ;DIVIDE REMAINING NUMBER BY RADIX
HRLM T2,(P) ;SAVE REMAINDER ON STACK
JUMPE T1,EITSB1 ;REMAINING NUMBER ALL GONE?
PUSHJ P,EITSUB ;NO, DIVIDE REMAINING NUMBER BY RADIX AGAIN
EITSB1: HLRZ CH,(P) ;GET MOST RECENT CHAR CONVERTED
ADDI CH,"0" ;CONVERT TO ASCII
PJRST (WD) ;OUTPUT CHAR TO TTY OR FIL AS SPECIFIED
; IN CALLING SEQUENCE
; RETURN TO EITSB1 UNTIL ALL CHAR OUTPUT
;ROUTINE TO OUTPUT JUST A STRING AND SUBSTITUTE ASCSTR FOR *
;CALL: FILSTR <MESSAGE*MESSAGE@>
FILSTR: HRLI T1,440700 ;FORM LH OF BYTE POINTER
STRLOP: ILDB CH,T1 ;GET NEXT CHAR
JUMPE CH,CPOPJ ;END OF STRING?
CAIN CH,"*" ;IS THIS ASTERISK?
JRST STRSUB ;YES, SUBSTITUTE STRING IN ASCSTR
PUSHJ P,FILPUT ;NO, STORE THIS CHAR IN FILE OUTPUT BUFFER
JRST STRLOP ;GO GET NEXT CHAR
STRSUB: PUSH P,T1 ;SAVE BYTE POINTER SO FAR
MOVEI T1,ASCSTR ;SETUP TO OUTPUT FROM WHERE USER TYPED IN
PUSHJ P,FILOUT ;OUTPUT STRING TO FILE
POP P,T1 ;RESTORE BYTE POINTER TO WHERE LEFT OFF
JRST STRLOP ;GO GET NEXT CHAR(SKIP OVER * ITSELF)
;ROUTINE TO OUTPUT LEFT ANGLE BRACKET CRLF TO FILE
;CALL: PUSHJ P,FILLAB
FILLAB: MOVEI CH,"<" ;LEFT ANGLE BRACKET
PUSHJ P,FILPUT ;PUT IN OUTPUT FILE
PJRST FCRLF ;OUTPUT CRLF TO FILE
;ROUTINE TO OUTPUT RIGHT ANGLE BRACKET CRLF TO FILE
;CALL: PUSHJ P,FILRAB
FILRAB: MOVEI CH,">" ;RIGHT ANGLE BRACKET
PUSHJ P,FILPUT ;PUT IN OUTPUT FILE
; FALL INTO FCRLF
;ROUTINE TO OUTPUT CRLF TO FILE
;CALL: PUSHJ P,FCRLF
FCRLF: MOVEI CH,C.CR ;OUTPUT CR
PUSHJ P,FILPUT ;TO FILE
MOVEI CH,C.LF ;THEN LINE FEED
; FALL INTO FILPUT
;ROUTINE TO OUTPUT 1 CHAR TO OUTPUT FILE, IF @ SUBSTITUTE CRLF
; OUTPUT TO TTY TOO IF DEBUGGING FLAG IS SET(DEBUG)
;INSERT PRECEDING ; IF FIRST CHAR ON A LINE AND F.COM SET
;CALL: MOVEI CH,CHAR
; PUSHJ P,FILPUT
; RETURN CH PRESERVED
FILPUT: TLNN F,(F.OFO) ;OUTPUT FILE OUTPUT YET?
POPJ P, ;NO, MUST BE ASKING QUESTION ABOUT OUTPUT FILE
CAIN CH,"@" ;YES, IS THIS CHAR THE CRLF CHAR?
PJRST FCRLF ;YES, OUTPUT CRLF TO FILE AND RETURN
SKIPE DEBUG ;NO, ARE WE DEBUGGING?
TLOE F,(F.TF) ;YES, IS THIS THE FIRST CHAR TO FIL
; AFTER TTY OUTPUT?
JRST FILPU1 ;NO, LEFT ANGLE ALREADY OUTPUT
PUSH P,CH ;YES, SAVE CHAR
MOVEI CH,"<" ;FLAG START OF OUTPUT WITH LEFT ANGLE
PUSHJ P,TTYPU1 ;ON TTY
POP P,CH ;RESTORE REAL FIRST CHAR TO FILE
FILPU1: TLZE F,(F.FLF) ;WAS LAST CHAR OUTPUT TO FILE A LF?
TLNN F,(F.COM) ;YES, SHOULD THIS LINEN BE A COMMENT IN FILE?
JRST FILPU2 ;NO, SO OUTPUT IT
PUSH P,CH ;YES, SAVE FIRST CHAR OF LINE
MOVEI CH,";" ;INSTEAD PUT OUT SEMI-COLON AS COMMENT CHAR
PUSHJ P,FILPU3 ; AS FIRST CHAR ON LINE
MOVEI CH,";" ;OUTPUT 2 ; IN CASE COMMENT IS IN MACRO
PUSHJ P,FILPU3 ;SO WONT SAVE COMMENT IN MACRO EXPANSION
MOVEI CH," " ;TAB
PUSHJ P,FILPU3 ;OUTPUT TAB
POP P,CH ;RESTORE FIRST CHAR OF COMMENT
FILPU2: CAIN CH,C.LF ;IS THIS CHAR A LINE FEED?
TLO F,(F.FLF) ;YES, FLAG LAST CHAR OUTPUT WAS A LINE FEED
; FOR NEXT CALL TO FILPUT
FILPU3: SKIPE DEBUG ;DEBUGGING SO WANT TO SEE FILE OUTPUT
PUSHJ P,TTYPU1 ;YES, OUTPUT TO TTY TOO
SOSG FOBUF+2 ;DECREMENT BUFFER COUNTER
PUSHJ P,[OUT FILCHN, ;BUFFER FULL, GIVE TO MONITOR
POPJ P, ;NO ERRORS
JRST FILERR] ;FILE ERROR, COMPLAIN AND START OVER
IDPB CH,FOBUF+1 ;STORE CHAR IN BUFFER
POPJ P, ;RETURN
;ROUTINE TO OUTPUT CRLF TO TTY
;CALL: PUSHJ P,TCRLF
TCRLF: MOVEI CH,C.CR ;CR CHAR
PUSHJ P,TTYPUT ;OUTPUT TO TTY
MOVEI CH,C.LF ;LINE FEED CHAR
; FALL INTO TTYPUT ROUTINE
;ROUTINE TO OUTPUT 1 CHAR TO TTY, IF @ SUBSTITUTE CRLF
;CALL: MOVEI CH,CHAR
; PUSHJ P,TTYPUT
; RETURN CH PRESERVED
TTYPUT: CAIN CH,"@" ;IS THIS THE CRLF CHAR?
PJRST TCRLF ;YES, OUTPUT CRLF ON TTY AND RETURN
SKIPE DEBUG ;NO, ARE WE DEBUGGING?
TLZN F,(F.TF) ;YES, IS THIS FIRST CHAR ON TTY AFTER FIL?
JRST TTYPU1 ;NO, OK TO OUTPUT
PUSH P,CH ;YES, SAVE REAL FIRST CHAR
MOVEI CH,">" ;AND INDICATE TERMINATION OF FILE OUTPUT
PUSHJ P,TTYPU1 ;OUTPUT TO TTY
POP P,CH ;RESTORE REAL FIRST TTY CHAR
;SUBROUTINE TO REALLY OUTPUT 1 CHAR TO TTY
TTYPU1: SOSG TOBUF+2 ;ROOM IN THIS OUTPUT BUFFER?
OUTPUT TTYCHN, ;NO, SO OUTPUT
IDPB CH,TOBUF+1 ;THEN STORE THIS CHAR IN BUFFER
POPJ P, ;RETURN
;SUBOURINTE TO FORCE OUT CURRENT BUFFER NOW
;CALL: PUSHJ P,TTYNOW
TTYNOW: OUTPUT TTYCHN, ;GIVE BUFFER TO MONITOR
POP P,(P) ;REMOVE INSTRUCTION FROM STACK
POPJ P, ;RETURN
SUBTTL DATA STORAGE
;CONSTANTS:
;DEFAULT FILE NAMES:
FILTAB: SIXBIT /HDWCNF/ ;HDWCNF
SIXBIT /TTYCNF/ ;TTYGEN
SIXBIT /NETCNF/ ;NETGEN
SIXBIT /F/ ;FGEN
;DISPATCH TABLE:
GENTAB: EXP HDWGEN ;HDWGEN
EXP TTYGEN ;TTYGEN
EXP NETGEN ;NETGEN
EXP FGEN ;FGEN
LSTD44: I,,PAR ;INDEX BY DC44 NUMBER
I,,PAP ;PA611R AND PA611P
I,,LPC ;END LPC11
I,,PCR ;END PC11 READERS
I,,PCP ;AND PC11 PUNCHES
TYPDEV=.-LSTD44-1
;VARIABLES:
; THESE ARE STRICTLY INTERNAL TO MONGEN AND ARE NEVER OUTPUT IN FILE
;ONES NOT CLEARED IN MAIN LOOP, INSTEAD SET TO INITIAL VALUES ONLY ON GET.
; THUS ^C START DOES NOT INITIALIZE:
FGTYPE: 0 ;TYPE OF SYSTEM FOR FGEN
HELPF: -1 ;FLAG TO TYPE /HELP ONLY ONCE THRU LOOP OR START
DEBUG: 0 ;PATCH NON-ZERO TO DEBUG BY HAVING FIL OUTPUT TO TTY TOO
; COME OUT ON TTY INSIDE <>
SAVLV: 0 ;CURRENT PERMANENT VERBOSICITY LEVEL FOR ASKING QUESTIONS
; AC LV MAY BE DIFFERENT IF USER HAS CHANGED
; LEVEL FOR THIS QUESTION ONLY
; LEVELS ARE -1 FOR SHORT, 0 FOR PROMPT,
; AND 1 OR GREATER FOR LONG
; INITIALLY SET TO PROMPT ON A GET
FHNAME: SIXBIT .FGEN. ;LOOKUP BLOCK FOR FGEN AUXILIARY HELP FILE
SIXBIT .HLP.
0
0
RUNDEV: BLOCK 1 ;DEVICE FROM RUN OR GET
RUNPPN: BLOCK 1 ;DIRECTORY FROM RUN OR GET
FGPPN: BLOCK 1 ;DIRECTORY TO USE FOR HELP FILE
;VARIABLES CLEARED EACH TIME THROUGH MAIN LOOP FOR A NEW GEN:
VARBEG: ;FIRST LOC CLEARED ON MAIN LOOP
PDLIST: BLOCK MP.PDL+1 ;PD LIST
ASKTAB: BLOCK MP.AMX+1 ;TABLE TO STOR POSSIBLE ANSWERS
; SETUP BY ASKLST WITH PROMPTING INSIDE ()
; LAST ENTRY MUST BE ZERO AS FLAG OF END
; FIRST ENTRY MAYBE 0 TO MEAN NO DEFAULT
; IE (,ANS0,ANS1,...)
ASCSTR: BLOCK <MP.LMX+4+1>/5 ;STRING FOR TTY INPUT LINE(SEE TTYIN)
; ENOUGH ROOM FOR MP.LMX CHAR, PLUS NULL
SAVN: BLOCK 1 ;PLACE TO SAVE MATCH INDEX IN ASKLST SUB
CNFIND: BLOCK 1 ;INDEX OF SYSTEM TYPE
MINLIM: BLOCK 1 ;MIN VALUE FOR ASK QUESTION. SET BY NOS. INSIDE ()
; WHICH PRECED A DASH.
MAXLIM: BLOCK 1 ;MAX VALUE FOR ASK QUESTION. SET BY NOS. INSIDE
; WHICH FOLLOW A DASH.
DFAULT: BLOCK 1 ;DEFAULT FOUND FIRST INSIDE () IN ASK QUESTION
; BY SETLST ROUTINE
WCHGEN: BLOCK 1 ;WHICH GEN, 0=HDW, 1=TTY, 2=NET, 3=F
WCHNAM: BLOCK 1 ;WHICH GEN NAME, LH=SIXBIT HDW, TTY, NET, OR F
CPU: BLOCK 1 ;LOOP COUNTER FOR CPU LOOP
SCPUNR: BLOCK 1 ;NON-ZERO IF SOME CPU HAS NO REAL-TIME CLOCK
CHNTYP: BLOCK 1 ;CHANNEL TYPE 0=DF10,1=DF10C,2=DX10
CHN: BLOCK 1 ;LOOP COUNTER FOR CHANNEL LOOP
DTA: BLOCK 1 ;LOOP COUNTER FOR DTA LOOP
MKON: BLOCK 1 ;COUNTER FOR MAG-TAPE KON ID
TAPOFS: BLOCK 1 ;NUMBER OF "EXTRA" TM02 UNITS
OSN: BLOCK 1 ;OCTAL STATION NO. CURRENTLY BEING DEFINED
LPTCNT: BLOCK 1 ;# OF LPTS
;FILE 4 WORD ENTER BLOCK:
OUTNAM: BLOCK 1 ;FILE NAME
OUTEXT: BLOCK 1 ;FILE EXTENSION
OUTDAT: BLOCK 1 ;FILE DATE
OUTPPN: BLOCK 1 ;FILE PROJECT, PROGRAMMER NUMBER
SAVPPN: BLOCK 1 ;SAVE PPN FOR MESSAGE AFTER ENTER
;BUFFER HEADERS:
TIBUF: BLOCK 3 ;TTY INPUT BUFFER HEADER
TOBUF: BLOCK 3 ;TTY OUTPUT BUFFER HEADER
FOBUF: BLOCK 3 ;FILE OUTPUT BUFFER HEADER
FHIBUF: BLOCK 3 ;FGEN AUXILIARY HELP FILE INPUT BUFFER HEADER
;BUFFERS
FILBUF: BLOCK NFILBF*203 ;BUFFERS FOR OUTPUT FILE
FHLPBF: BLOCK NFHLPBF*203 ;BUFFERS FOR FHELP FILE
;POINTERS TO FGEN SWITCH TABLE
FTTAB: BLOCK 1 ;POINTER TO TABLE READ FROM FILE
FTADD: BLOCK 1 ;POINTER TO TABLE OF USER ADDED SWITCHES
FTLEN: BLOCK 1 ;MINUS LENGTH OF WHOLE TABLE
;VARIABLES WHICH ARE ALSO OUTPUT IN FILE AS SYMBOLS
;***************************************************************
;NOTE: MACRO REQUIRES A ; AFTER ANGLE BRACKET IN CALL, ELSE TAB
; SNEAKS IN BETWEEN SYMBOL AND ;
;***************************************************************
;MACRO TO DEFINE CONSECUTIVE VARIABLES USED BY AOS(N) TRICK
;ORDER MUST BE THE SAME AS IN PROMPTING ANSWERS INSIDE PARENS
DEFINE V (A)<
IRP (A) <M.'A: BLOCK 1
>>
V <1040,1050,1055,1070,1077,1080,1088,1091>; ;WHICH TYPE OF DECSYSTEM10
V <RT0,RT1,RT2,RT3,RT4,RT5>; ;NO OF DK-10S ON CPU'N
V <RTX>; ;TOTAL DK-10S ON SYSTEM
V <RTCA>; ;HIGH PRECISION TIME ACCOUNTING
V <RTCO>; ;INCLUDE MONITOR OVERHEAD IN RUNTIME
V <RTC>; ;INCLUDE DK10 SERVICE ROUTINE
V <EMRT>; ;EBOX/MBOX RUNTIME ACCOUNTING
V <XPI>; ;EXCLUDE PI TIME FROM USER RUNTIME
V <CPU>; ;NO. OF CPUS
V <P10>; ;PDP-10
V <P10I>; ;PDP-10I
V <KL10>; ;KL10 CPU
V <C0SN,C1SN,C2SN,C3SN,C4SN,C5SN>; ;CPU SERIAL NOS.
V <MON,DAY,YEAR>; ;MONTH, DAY, YEAR SYMBOLS
V <CHN>; ;NO. OF DISK CHANNELS
V <RC10>; ;NO. OF RC10 CONTROLLERS
V <RH1S>; ;NO OF RH10/RS04 CONTROLLERS
V <RH1P>; ;NO OF RH10/RP04 CONTROLLERS
V <RH2P>; ;NO. OF RH20/RP04 CONTROLLERS
;MUST IMMEDIATELY FOLLOW RH1P
V <RHP4>; ;TOTAL NO OF RHP04'S (RH10 AND RH20)
V <RH20>; ;NO. OF RH20S (RP04, TM02)
V <RP10>; ;NO. OF RP10 CONTROLLERS
V <TC10>; ;NO. OF TC10 CONTROLLERS
V <TX01>; ;NO. OF TX01 CONTROLLERS
V <TM10>; ;NO. OF TM10 CONTROLLERS
V <T210>; ;NO. OF TM02 CONTROLLERS
V <HRSN>; ;HIGHEST REMOTE STATION NUMBER
V <TTDN>; ;TOTAL NUMBER OF RSX20-F TERMINALS
V <DLPT>; ;TOTAL NUMBER OF RSX20-F LPTS
V <DCDR>; ;TOTAL NUMBER OF RSX20-F CDRS
;HDWGEN:
V <VP10,340,VBXC>; ;TYPE OF DISPLAY
V <DAS78,D78L,0D78,1D78,2D78,3D78,4D78,5D78,6D78,7D78>; ;DAS78
;TTYGEN:
V <DC10,DC68,DC76>; ;TYPE OF TERMINAL COMMUNICATIONS EQUIPMENT
V <TTG0,TTG1,DSG0,DSG1,68L0,68L1,D70N,D71N,D72N,D73N,D74N,D75N,D76N,D77N>
DEFINE BLOK4(PREFIX,POSTFX)
< IRP PREFIX
<
PREFIX:
ZZZ=0
REPEAT 8,<
WORD (PREFIX,\ZZZ,POSTFX)
ZZZ=ZZZ+1
> ;;END OF REPEAT 4
> ;;END OF IRP PREFIX
> ;;END OF DEFINE BLOK4
DEFINE WORD(A,B,C)
<A'B'C: EXP 0
>
;NOTE THE POSTFIX IS A NOOP FOR PREFIXES OF 5 CHARACTERS E.G. TYPNU
M.DC44: EXP 0 ;NUMBER OF DC44'S
TYPNUM: EXP 0 ;TOTAL NUMBER OF DC44 FRONT END DEVICES
BLOK4 <TYPNU,PAR,PAP,LPC,PCR,PCP>,N
M.DC75: EXP 0 ;NUMBER OF DC75'S OF DAS85'S
M.DL10: EXP 0
M.0D85: EXP 0 ;SYMBOL INDICATING PORT PRESENT
M.1D85: EXP 0
M.2D85: EXP 0
M.3D85: EXP 0
M.4D85: EXP 0
M.5D85: EXP 0
M.6D85: EXP 0
M.7D85: EXP 0
M.CONN: EXP 0 ;ACCUMULATES DEFAULT # OF CONNECTS
VAREND==.-1 ;LAST LOC TO CLEAR IN MAIN LOOP FOR NEW GEN
END BEGINA