PDP-10 Archive: d8sint.mac from de-10-omona-v-mc9

Trailing-Edge - PDP-10 Archives - de-10-omona-v-mc9 - d8sint.mac

There are 6 other files named d8sint.mac in the archive. Click here to see a list.

TITLE	D8SINT - INTERRUPT SERVICE ROUTINE FOR DN87S - V006
SUBTTL	ERIC WERME/EJW  30 NOV 76
	SEARCH	F,S,DTEPRM
	$RELOC
	$HIGH


;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
;  OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1976,1977,1978 BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
XP	VD8SINT,006		;VERSION NUMBER

ENTRY	D8SINT			;REFERENCED IN COMNET TO FORCE LOADING
D8SINT:

COMMENT	\

THIS MODULE IS MEANT TO BE A CARBON COPY OF D85INT, THE DL10/NETSER
INTERFACE. SINCE D85INT IS ORIENTED
AROUND SINGLE MESSAGE TRANSFERS, SO IS D8SINT EVEN THOUGH DTESER IS
WILLING TO QUEUE ANY NUMBER OF MESSAGES.
\

;UNUSED FRONTEND ROUTINES:
D8SONC==:CPOPJ##
D8SSEC==:CPOPJ##

;LOCAL SYMBOLS:
D8.INP==1B0			;SET IN FEKUNI WHEN EXPECTING INPUT
D8.OUT==1B1			;SET IN FEKUNI WHEN DOING OUTPUT

LN.MOR==1B17			;LINE NUMBER BIT SAYING ANOTHER FRAGMENT IS COMING

;ROUTINE CALLED WHEN NETSER IS WILLING TO ACCEPT A SINGLE MESSAGE.
;CALL:
;J/	FEK ADDRESS
;FEKIAD(J)		PCB ADDRESS THAT POINTS TO MESSAGE AREA

D8SRDD::PUSHJ	P,SAVE4##	;NEED ALL THE PERM. ACS
	MOVE	W,FEKUNI##(J)	;GET DTK ADDRESS
	MOVSI	T1,(D8.INP)	;MAKE SURE WE AREN'T ALREADY EXPECTING
	TDNE	T1,FEKUNI##(J)	;  A MESSAGE
	STOPCD	.+1,DEBUG,RIP,	;++ READ IN PROGRESS
	IORM	T1,FEKUNI##(J)	;NOW WE EXPECT ONE
	MOVE	U,FEKIAD##(J)	;HUNT DOWN BYTE POINTER TO MESSAGE AREA
	MOVE	T1,PCBIAD##(U)	;GET POINTER
	MOVEM	T1,DTKIBP##(W)	;SAVE TO PASS TO DTESER LATER
	HLLZS	PCBICT##(U)	;INITIALIZE MESSAGE LENGTH TO 0
	AOSN	DTKARC##(W)	;IF THIS DOESN'T SKIP, THEN UUO LEVEL ISN'T SENDING
	PJRST	SNDACK		; A DATA MESSAGE. WE CAN SEND AN ACK NOW SAFELY
	POPJ	P,		;UUO LEVEL BUSY - IT WILL SEND ACK WHEN DONE

;ROUTINE TO QUEUE OUT A MESSAGE TO A DN87. ONLY ONE AT A TIME MAY
;BE SENT, NETSER WILL BE NOTIFIED AT FEKINT WHEN THE MESSAGE HAS BEEN
;SENT
;CALL:
;J/		FEK ADDRESS
;FEKOAD(J)	PCB ADDRESS OF MESSAGE
;USES U, T1-T4

D8SWRT::PUSHJ	P,SAVE4##	;NEED THESE TO TALK TO DTESER
	PUSH	P,S		;SAVE SINCE UUO LEVEL CODE GETS HERE
	MOVE	W,FEKUNI##(J)	;POINT TO THIS 87'S DTK
	HRRZ	U,FEKOAD##(J)	;POINT TO MESSAGE'S PCB
	MOVSI	T1,(D8.OUT)	;GET OUTPUT IN PROGRESS FLAG
	TDNE	T1,FEKUNI##(J)	;WHICH SHOULD BE CLEAR NOW
	STOPCD	.+1,DEBUG,OIP,	;++ OUTPUT IN PROGRESS
	IORM	T1,FEKUNI##(J)	;IT IS NOW
	MOVSI	S,T11DON	;POST ADDRESS FOR WHEN MESSAGE IS DONE
	HRRZ	P1,DTKUNI##(W)	;GET DTE # TO SEND MESSSAGE TO
	MOVE	P2,[.EMNCL,,EM.IND!.EMSTR] ;SEND INDIRECT STRING DATA
	HRRZ	P3,PCBOCT##(U)	;LENGTH
	MOVE	P4,PCBOAD##(U)	;ADDRESS OF MESSAGE
	AOS	DTKARC##(W)	;DON'T LET D8SRDD SEND ACK BETWEEN FRAGMENTS
	SKIPN	PCBOC2##(U)	;IS THERE SOME USER DATA?
	JRST	D8SWR2		;NO, JUST SEND THIS PIECE
	HRLI	P3,(LN.MOR)	;TELL -11 THERE IS MORE TO COME
	PUSHJ	P,DTEQUE##	;SEND IT
	  JRST	WRTPNT		;ABORT THIS WRITE
	LDB	T1,PCBPCV##	;GET COMPRESSION CODE
	HRRZ	P3,PCBOC2##(U)	;GET USER DATA MESSAGE LENGTH
	CAIE	T1,PCV.BN##	;BINARY DATA? (WORD MODE NEEDED)
	JRST	D8SWR1		;NO, NOTHING FUNNY
	LSH	P3,1		;MAKE # OF -11 BYTES
	IORI	P2,EM.16B	;REQUEST WORD MODE TRANSFER
D8SWR1:	DPB	T1,[POINT 2,P3,16] ;SAVE COMPRESSION IN LINE # FIELD
	MOVE	P4,PCBOA2##(U)	;AND LOCATION (IN EVM!!!)
D8SWR2:	PUSHJ	P,DTEQUE##	;SEND IT, CONTINUE BELOW WHEN SENT
	  JRST	WRTPNT
	PUSHJ	P,CHKACK	;DECREMENT DTKARC AND SEND ACK IN NECESSARY
SPOPJ:	POP	P,S		;RESTORE S
	POPJ	P,

WRTPNT:	PUSHJ	P,CHKACK	;JUST 'CAUSE WE'RE FOULED UP, DON'T FOULUP INPUT
	MOVSI	T1,(D8.OUT)	;TURN OFF OUTPUT DONE EXPECTED
	ANDCAM	T1,FEKUNI##(J)	;THIS CODE REALLY SHOULD BE FIXED....
	JRST	SPOPJ		;'CAUSE IT DOESN'T WORK IF 1 OF 2 FRAGMENTS WENT OUT

;HERE AFTER DTESER HAS SUCCESSFULLY TRANSMITTED THE MESSAGE

T11DON:	MOVE	J,DTEFEK##(P1)	;GET FEK ADDRESS
	HRRZ	U,FEKOAD##(J)	;IF WE JUST DIED, WE WON'T HAVE A PCB
	PJUMPE	U,CPOPJ##	;IN WHICH CASE NETSER DOESN'T WANT TO HEAR FROM US
	MOVSI	T1,(D8.OUT)	;MAKE SURE WE'RE EXPECTING THIS
	TDNN	T1,FEKUNI##(J)
	STOPCD	.+1,DEBUG,UOD,	;++ UNEXPECTED OUTPUT DONE
	TLNE	P3,(LN.MOR)	;WAS THAT ONLY PART?
	POPJ	P,		;YES, DON'T TELL NETSER UNTIL WHOLE THING IS OUT
	ANDCAM	T1,FEKUNI##(J)	;NO LONGER EXPECTING IT
	HRLI	J,FI.OUD##	;TELL NETSER THAT OUTPUT WAS DONE AND
	PJRST	FEKINT##	; THAT WE WANT ANOTHER MESSAGE


;HERE WHEN D8SWRT HAS SENT ALL THE FRAGMENTS OF THE NCL MESSAGE IT CAN SO
;IT IS NOW SAFE TO SEE IF THE INTERRUPT CODE (D8SRDD) WANTED TO SEND
;AN ACK TO REQUEST ANOTHER MESSAGE. IT CANNOT DO SO BETWEEN THE TIME WE
;SEND THE FIRST AND LAST FRAGMENTS BECAUSE THE ACK WILL LOOK LIKE A
;MESSAGE TERMINATION AND THE NEXT DATA FRAGMENT WILL LOOK LIKE THE START
;OF AN NCL MESSAGE.

CHKACK:	SOSGE	DTKARC##(W)	;THIS SKIPS IFF D8SRDD DID ITS AOS
	POPJ	P,		;IT DIDN'T, SO WE DON'T HAVE TO SEND AN ACK
SNDACK:	SETOM	DTKARC##(W)	;RESET SEMAPHORE FROM 0
	MOVSI	S,CPOPJ##	;DON'T NEED TO KNOW IT'S SENT
	HRRZ	P1,DTKUNI##(W)	;GET DTE # TO SEND MESSAGE THROUGH
	DMOVE	P2,[.EMNCL,,.EMACK ;SEND AN ACK
		    2]		;AND 2 BYTES DATA
	SETZ	P4,		;SNEAKY WAY TO SEND 0 DATA
	PUSHJ	P,DTEQUE##	;NO, JUST SEND THIS PIECE
	  PJRST	DEAD87		;NEED BETTER CODE - CALL IT DEAD FOR NOW
	POPJ	P,
				;TO CPOPJ WHEN SENT
				;TO DTESTR WHEN THE MESSAGE DOES ARRIVE

;ROUTINE CALLED WHEN DTESER DISCOVERS ANOTHER -11 IS UP. IF THAT
;-11 HAS A FEK BLOCK, THEN IT IS A DN87S AND NETSER WILL BE TOLD ABOUT IT.

NCLUP::	SKIPN	J,DTEFEK##(P1)	;DOES THIS -11 HAVE A FEK?
	POPJ	P,		;NOPE, DON'T WORRY ABOUT IT
	HLRM	J,FEKUNI##(J)	;REMEMBER WHICH DTK IS ASSOCIATED WITH FEK
	MOVSI	T1,(D8.INP!D8.OUT) ;NO LONGER EXPECTING INPUT OR OUTPUT
	ANDCAM	T1,FEKUNI##(J)
	MOVSI	T1,FK.ONL##	;SET ONLINE FLAG FOR NETSER'S ONCE PER
	IORM	T1,FEKBLK##(J)	;  SECOND CODE WHICH WILL START THINGS UP
	POPJ	P,


;ROUTINE CALLED FROM DTESER WHEN THE -11 ENTERS SECONDARY PROTOCOL
;WHICH ONLY HAPPENS WHEN IT IS BEING RELOADED.
;DEAD87 IS CALLED FROM SNDACK WHEN IT CAN'T SEND ONE

NCLDWN::SKIPN	J,DTEFEK##(P1)	;DOES THIS -11 HAVE A FEK?
	POPJ	P,		;NOPE, NETSER WON'T BE INTERESTED
DEAD87:	PUSH	P,F		;SAVE ETD ADDRESS FROM DTESER
	HRLI	J,FI.DWN##	;TELL NETSER THAT SOMEONE DIED
	PUSHJ	P,FEKINT##
	PJRST	FPOPJ##		;RESTORE F BEFORE RETURNING TO DTESER

;TO-10 DISPATCH TABLE
	CPOPJ##			;(-1) LOST TO -10 IN DIRECT MESSAGE
NCLDSP::EATMSG##		;(0)
	EATMSG##		;
	EATMSG##		;
	D8SSTR			;(3) HERE IS STRING DATA
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;(10)
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;(20)
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;
	EATMSG##		;

;ROUTINE TO HANDLE INCOMING STRING DATA MESSAGE. HERE WHEN HEADER
;HAS ARRIVED.

D8SSTR:	SKIPN	J,DTEFEK##(P1)	;GET FEK ADDRESS FOR THIS DTE
	PJRST	EATMSG##	;IGNORE IF WE DON'T THINK IT IS A DN87S
	MOVE	W,FEKUNI##(J)	;GET THE DTK FOR THIS -11
	HRRZ	U,FEKIAD##(J)	;GET THE PCB WE'RE SUPPOSED TO BE FILLING
	MOVSI	T1,(D8.INP)	;MAKE SURE WE'RE EXPECTING THIS
	TDNN	T1,FEKUNI##(J)	; (BIT WAS SET BY NETRDD)
	PJRST	EATMSG##	;NOT EXPECTING IT, DISCARD IT
	MOVSI	S,T10DON	;POST ADDRESS FOR WHEN DATA COMES IN
	MOVE	P4,DTKIBP##(W)	;TELL DTESER WHERE TO PUT MESSAGE
	MOVEI	T1,(P3)		;ISOLATE LENGTH
	ADDM	T1,PCBICT##(U)	;TELL NETSER LENGTH OF MESSAGE
	ADJBP	T1,DTKIBP##(W)	;READY POINTER FOR NEXT MESSAGE
	MOVEM	T1,DTKIBP##(W)	;AND REMEMBER IT
	POPJ	P,		;RETURN TO HAVE DTESER XFER INDIRECT PORTION
				;CONTINUE AFTER HERE WHEN DATA IS IN

T10DON:	SKIPN	J,DTEFEK##(P1)	;GET FEK ADDRESS AGAIN
	POPJ	P,		;I MET A MAN WHO WASN'T THERE...
	MOVSI	T1,(D8.INP)	;BETTER MAKE SURE WE'RE EXPECTING THIS
	TDNN	T1,FEKUNI##(J)
	STOPCD	.+1,DEBUG,UID,	;++ UNEXPECTED INPUT DONE
	TLNE	P3,(LN.MOR)	;MORE TO COME?
	POPJ	P,		;YES, DON'T TELL NETSER TIL ALL IN
	ANDCAM	T1,FEKUNI##(J)	;CLEAR IT SINCE NO LONGER EXPECTING
	HRLI	J,FI.IND##	;FLAG FOR INPUT DONE
	PJRST	FEKINT##	;AND TELL NETSER WE HAVE A MESSAGE


	$LIT
	END