Trailing-Edge
-
PDP-10 Archives
-
custsupcuspmar86_bb-x130b-sb
-
d85int.mac
There are 7 other files named d85int.mac in the archive. Click here to see a list.
TITLE D85INT - INTERRUPT SERVICE ROUTINE FOR THE DAS85 - V045
SUBTTL DMCC/KR/JBS 10 SEP 85
SEARCH F,S,NETPRM
$RELOC
$HIGH
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
.CPYRT<1975,1986>
;COPYRIGHT (C) 1975,1976,1977,1978,1979,1980,1982,1984,1986
;BY DIGITAL EQUIPMEMT CORP., MAYNARD, MASS.
;ALL RIGHTS RESERVED.
;
;
XP VD85INT,045 ;VERSION NUMBER
ENTRY D85INT
D85INT::
Comment @
THE FORMAT OF A DL-10 BYTE POINTER IS:
BYTE 3(P), 3(S), 8(C), 22(A)
WHERE
P := THE POSITION OF THE BYTE IN THE WORD
S := THE SIZE OF THE BYTE (SEE TABLE)
C := THE WORD COUNT (PDP-10 WORDS) OF THE BLOCK OF BYTES THAT
IS BEING TRANSFERRED. (IN NEGATIVE FORM. OVERFLOW OCCURS
WHEN YOU TRY TO IMCREMENT "377")
A := THE 22 BIT PHYSICAL ADDRESS OF THE WORD CONTAINING THE
NEXT BYTE.
TABLE OF LEGAL VALUES FOR THE "S" FIELD
S MODE BITS/BYTE FUNCTION
0 IMMEDIATE 16 THE BYTE IS IN THE RIGHT MOST 16 BITS
OF THE "A" FIELD OF THE BYTE POINTER ITSELF.
1 NOT IMM 16 THE BYTE IS IN THE LOCATION SPECIFIED BY
"A" AT POSITION "P"
2 NOT IMM, INCR 16 ANALOGOUS TO THE ILDB INSTRUCTION.
3 NOT IMM, INCR 12 SAME
4 NOT IMM, INCR 8 SAME
5 NOT IMM, INCR 7 SAME
6 NOT IMM, INCR 6 SAME
7 IMMEDIATE 16 SAME AS "S" = 0.
THE "P" FIELD IS THE POSITION OF THE BYTE IN THE PDP-10 WORD. SINCE THE
DL-10 PERFORMS THE "ILDB" FUNCTION A "P" FIELD OF ZERO WILL GIVE THE SECOND
BYTE OF THE WORD WHEN USED IN AN INCREMENTING BYTE POINTER. IN ORDER TO GET
THE FIRST BYTE OF THE WORD ONE SHOULD SPECIFY A "P" FIELD OF "7". THIS
FIELD WHEN INCREMENTED DOES NOT ADVANCE THE WORD-COUNT OR THE ADDRESS.
End of Comment @
;BYTE POINTERS TO THE FIELDS OF A DL-10 BYTE POINTER
DEFINE %DLBPP (AC),<POINT 3,AC,2> ;POINT TO THE "P" FIELD
DEFINE %DLBPS (AC),<POINT 3,AC,5> ;POINT TO THE "S" FIELD
DEFINE %DLBPC (AC),<POINT 8,AC,13> ;POINT TO THE "C" FIELD
DEFINE %DLBPA (AC),<POINT 22,AC,35> ;POINT TO THE "A" FIELD
;D85DSP ROUTINE CALLED BY NETSER THAT DISPATCHES TO THE PROPER FEK FUNCTION
;CALL T1 := FUNCTION CODE
; J := FEK ADDRESS
;RETURN CPOPJ
D85DSP::CAIL T1,FF.ONC ;RANGE CHECK THE FUNCTION
CAILE T1,FF.CPW ; CODE AND STOP IF BAD
PUSHJ P,NTDSTP## ;++ ERROR: BAD FUNCTION CODE TO FEK
JRST @.+1(T1) ;DISPATCH TO APPROPRIATE ROUTINE
IFIW NTFONC## ;ONCE ONLY CODE
IFIW NTFSEC## ;ONCE/SECOND CODE -- USE NETSER'S DEFAULT
IFIW D85RDD ;SET UP A READ REQUEST
IFIW D85WRT ;SET UP A WRITE REQUEST
IFIW D85CRS ;CRASH THE FEK (CPU WENT DOWN?)
IFIW CPOPJ## ;NOT USED FOR D85'S
IFIW CPOPJ## ;NOT USED EITHER
IFIW CPOPJ## ;WE DON'T HANDLE STATION CONTROL
IFIW D85CPS ;GET READY TO GO TO SLEEP
IFIW D85CPW ;CPU JUST WOKE UP.
;D85RDD THIS ROUTINE IS CALLED TO START A READ FROM THE DL-10.
D85RDD:
IFN FTMP,<
HLRZ T1,FEKUNI(J) ;GET OUR CPU NUMBER, AND IF THIS IS
CAME T1,.CPCPN## ; NOT "OUR" CPU, THEN SET "FK.STI"
PJRST SETSTI ; SO THAT CLOCK LEVEL WILL RE-START US
>
AOSE FEKBSI(J) ;GET THE INPUT INTERLOCK (WE GET HERE FROM
; BOTH UUO AND INTERRUPT LEVEL)
POPJ P, ;IF ALREADY DOING INPUT, EXIT
JSP T3,SETUP ;SET UP W, S
HRRZ U,FEKIAD(J) ;GET A POINTER TO THE PCB TO FILL
IFN FTKL10,< ;ONLY WORRY ABOUT CACHE ON A KL-10
PUSHJ P,PCBCHK## ;MAKE SURE DATA IS ACCESSABLE. SWEEP CACHE
; IF NECESSARY
>
MOVE T1,PCBPTR(U) ;GET THE PDP-10 BYTE POINTER
MOVE T2,PCBCTR(U) ;GET THE PDP-10 BYTE COUNT
PUSHJ P,DLBP ;GO BUILD A DL-10 BYTE POINTER
MOVEM T1,DLXID1##(W) ;STORE THE DL-10 BYTE POINTER
HRRZM T2,DLXIC1##(W) ;STORE THE DL-10 BYTE COUNT
SETZM DLXIC2##(W) ;INDICATE THAT ONLY ONE BYTE POINTER.
MOVEI T1,1 ;GET THE FLAG AND
MOVEM T1,DLXIFL##(W) ;TELL THE -11 TO START.
MOVSI T1,FK.IAC ;GET THE "INPUT ACTIVE" BIT
IFN PARANOID&P$FEK,<
TDNE T1,FEKBLK(J) ;MAKE SURE WE AREN'T ALREADY READING
PUSHJ P,NTDSTP## ;++ ERROR: READ ALREADY IN PROGRESS
>
IORM T1,FEKBLK(J) ;SET INPUT ACTIVE FOR D85KII TO SEE
JRST EXIT ;GO TO COMMON EXIT TO CLEAR THE STACK
; AND INTERRUPT THE -11
;D85WRT HERE TO START AN OUTPUT TRANSFER
D85WRT:
IFN FTMP,<
HLRZ T1,FEKUNI(J) ;GET THIS FEK'S CPU NUMBER, AND IF IT'S
CAME T1,.CPCPN## ; NOT THE SAME AS THE CPU WE'RE ON, THEN
JRST SETSTO ; SET "FK.STO" SO CLOCK LEVEL WILL KICK US
>
AOSE FEKBSO(J) ;GET THE "OUTPUT BUSY" INTERLOCK
POPJ P, ; IF ALREADY DOING OUTPUT, EXIT NOW
SKIPG FEKOCT(J) ;MAKE SURE WE HAVE SOMETHING TO OUTPUT
JRST [SETOM FEKBSO(J);IF NO OUTPUT MSGS, SET OUTPUT IDLE
POPJ P,] ; AND RETURN
JSP T3,SETUP ;SET UP W & S
HRRZ U,FEKOAD(J) ;GET A POINTER TO THE PCB TO SEND
IFN FTKL10,<
PUSHJ P,PCBCHK## ;MAKE SURE IT'S OUT OF CACHE. SWEEP IF NOT
>
MOVE T1,PCBPTR(U) ;GET THE PDP-10 BYTE POINTER
MOVE T2,PCBCTR(U) ;GET THE PDP-10 BYTE COUNT
PUSHJ P,DLBP ;BUILD THE DL-10 BYTE POINTER
MOVEM T1,DLXOD1##(W) ;SAVE THE CONTROL DL-10 BYTE POINTER
HRRZM T2,DLXOC1##(W) ; SAVE THE HEADER BYTE COUNT
MOVE T1,PCBPT2(U) ;GET "SECONDARY" BYTE POINTER
SKIPE T2,PCBCT2(U) ;GET "SECONDARY" BYTE COUNT
; BUT DON'T MAKE A BYTE POINTER IF CNT IS ZERO
PUSHJ P,DLBP ;MAKE A DATA BYTE POINTER FOR THE DL-10
MOVEM T1,DLXOD2##(W) ;STORE THE OUTPUT BYTE POINTER
HRRZM T2,DLXOC2##(W) ;STORE THE OUTPUT BYTE COUNT
SETZM DLXOC3##(W) ;WE NEVER USE THE THIRD BYTE POINTER.
LDB T1,PCBPCV## ;GET THE CONVERSION CODE
ADDI T1,1(T1) ;SHIFT OVER AND TURN ON MSG AVAILABLE FLAG
MOVEM T1,DLXOFL##(W) ;TELL THE -11 THAT HE CAN START READING.
MOVSI T1,FK.OAC ;GET THE "OUTPUT ACTIVE" BIT
IFN PARANOID&P$FEK,<
TDNE T1,FEKBLK(J) ;MAKE SURE IT ISN'T SET
PUSHJ P,NTDSTP## ;++ ERROR: OUTPUT IN PROGRESS
>
IORM T1,FEKBLK(J) ;TELL D85KII THAT INTERRUPT MAY BE OUTPUT DONE
JRST EXIT ;CLEAN UP THE STACK AND INTERRUPT THE -11
;SETSTO & SETSTI -- ROUTINES TO SET THE REQUEST BITS SO NETSER WILL
; CALL US ON THE PROPER CPU
SETSTO: MOVSI T1,FK.STO ;GET THE START OUTPUT BIT
CAIA
SETSTI: MOVSI T1,FK.STI ;GET THE START INPUT BIT
IORM T1,FEKBLK(J) ;SET THE BIT
POPJ P, ; AND WAIT FOR NETSER TO CALL
;DLBP MAKE A DL-10 BYTE POINTER FOR DATA.
;CALL MOVE T1,EXEC VIRTUAL ADDRESS OF DATA
; MOVE T2,NUMBER OF BYTES
; PUSHJ P,DLBP
;RETURN CPOPJ ;ALWAYS
; T1 CONTAINS A DL-10 BYTE POINTER
; T2 CONTAINS THE NUMBER OF BYTES.
DLBP: LDB T3,[POINT 6,T1,11] ;GET THE SIZE FROM THE PDP-10 POINTER
CAIN T3,^D16 ;IS IT A 16 BIT BYTE?
JRST [MOVEI T4,2 ;THEN 2 BYTES/WORD
JRST DLBP1] ; AND GO PROCESS IT
CAIN T3,^D12 ;IS IT A 12 BIT BYTE?
JRST [MOVEI T4,3 ;THEN 3 BYTES/WORD
JRST DLBP1] ; AND GO PROCESS IT
MOVEI T4,^D12 ;THEN ASSUME IT IS OF SIZE 8, 7, OR 6.
SUBI T4,(T3) ;TRANSLATE IT INTO A DL-10 BYTE SIZE.
CAIL T4,4 ; AND IF THE RESULT IS NOT LEAGAL. (IE
CAILE T4,6 ; NOT 4, 5, OR 6) GO GIVE AN ERROR
STOPCD .,STOP,BBS, ;++ BAD BYTE SIZE
DLBP1:
MAP T3,(T1) ;CONVERT THE BYTE-POINTER ADDR TO PHYSICAL ADDR
DPB T3,[%DLBPA T1] ;STORE BACK THE PHYSICAL ADDRESS.
DPB T4,[%DLBPS T1] ;STORE THE SIZE
MOVEI T3,(T2) ;COPY THE BYTE COUNT.
IDIVI T3,(T4) ;DIVIDE TO GET THE NUMBER OF WORDS
SKIPE T4 ;IF IT WASN'T AN EVEN MULTIPLE, THEN
AOS T3 ; ALLOW FOR THE EXTRA WORD.
MOVNS T3 ;MAKE THE WORD COUNT NEGATIVE FOR THE DL-10
DPB T3,[%DLBPC T1] ;STORE THE WORD COUNT
SETO T3, ;GET A 7 FOR THE POSITION FIELD
DPB T3,[%DLBPP T1] ;STORE THE POSITION FIELD
POPJ P, ;T1 := DL-10 BYTE POINTER; T2 := BYTE COUNT.
;D85CRS ROUTINE TO CLEAR THE DL-10 PORT ENABLE.
; CALLED BY NETSER WHEN IT BELIEVES THE -11 IS SICK
;CALL J := FEK ADDRESS
;RETURN CPOPJ
D85CRS: PUSHJ P,SAVE3## ;WE SET UP THE P'S FOR REMPRG
HRRZ P2,FEKUNI(J) ;GET THE DL-10 BASE TABLE ADDRESS
JUMPE P2,CPOPJ## ;RETURN IF WE DON'T HAVE A WINDOW
HRRZ P3,DLXWIN##(P2) ;GET THE WINDOW ADDRESS
SETZM DLXDWN##(P3) ;TELL THE -11 WE THINK HE'S CRASHED
XCT DLXCLR##(P2) ;CLEAR PORT ENABLE
XCT DLXPRG##(P2) ;CALL REMPRG TO CALL NETSER...
MOVSI T1,(JFCL) ;GET A JFCL INSTRUCTION
MOVEM T1,DLXINI##(P2) ; AND PUT IT IN AS THE INTERRUPT INSTR
MOVEM T1,DLXPRG##(P2) ; AND THE "CRASH" INSTRUCTION
POPJ P, ;THE -11 CAN NO LONGER POKE -10 MEMORY.
;D85CPS ROUTINE CALLED WHEN THIS CPU IS ABOUT TO GO TO SLEEP
; SHUTS DOWN THE FEK AND LETS NETSER KNOW IT'S DOWN
;CALL J := POINTER T O THE FEK
;RETURN CPOPJ
D85CPS: JRST D85CRS ;JUST "CRASHING" THE FEK SHOULD BE ENOUGH
;D85CPW ROUTINE CALLED WHEN THIS CPU IS WAKING UP AFTER A SLEEP
; I DON'T THINK IT NEEDS TO DO ANYTHING...
;CALL J := POINTER T O THE FEK
;RETURN CPOPJ
D85CPW: POPJ P,
;UTILITY ROUTINES FOR D85RDD AND D85WRT
;SETUP ROUTINE TO SAVE AND SETUP REGISTERS U, S, & W
;CALL JSP T3,SETUP
SETUP: PUSH P,S ;SAVE THE FLAGS
PUSH P,U ;PRESERVE U
PUSH P,W ;PRESERVE W
HLLZ S,FEKBLK(J) ;SET UP THE FLAGS
HRRZ W,FEKUNI(J) ;GET ADDRESS OF DL-10 BASE TABLE
SKIPN W ;MAKE SURE THAT THE WINDOW IS SET UP
STOPCD CPOPJ##,DEBUG,WNS, ;++ WINDOW WAS NOT SETUP?
HRRZ W,DLXWIN(W) ; AND FROM THAT, GET ADDRESS OF WINDOW
JRST (T3) ;RETURN TO CALLER
EXIT: HRRZ W,FEKUNI(J) ;GET THE ADDRESS OF THE DL-10 BASE TABLE
XCT DLXI11##(W) ; IT CONTAINS INSTRUCTION TO INTERRUPT THE 11
POP P,W ;RESTORE W
POP P,U ;RESTORE U
POP P,S ;RESTORE THE FLAGS
POPJ P,
;DC75 WINDOW OFFSETS. THESE ARE COPIED FROM THE DC75 CODE.
; THE FIRST FEW WORDS CORRESPOND TO THE DC76 WINDOW.
D75WIN: PHASE 0
BLOCK 3 ;INTERRUPT INSTR AND TWO UNUSED WDS
BLOCK 1 ;POINTER TO NAME "DC75"
BLOCK 1 ;PDP-11 PORT NUMBER
BLOCK 1 ;11-ALIVE. INC BY 10 ONCE A SEC.
BLOCK 1 ;STOP CODE VALUE
BLOCK 1 ;"DOWN" INDICATOR
BLOCK 1 ;UP TIME
;THE FOLLOWING ITEMS ARE SPECIFIC TO THE DC75
DLSWRD:!BLOCK 1 ;GLOBAL STATUS WORD
DLS.DP==1 ;DEPOSIT 11 CORE
DLS.EX==2 ;EXAMINE 11 CORE
DLS.ER==4 ;ILLEGAL ADDRESS
DLADR:! BLOCK 1 ;ADDRESS TO EXAMINE 11 CORE
DLDTA:! BLOCK 1 ;CONTENTS OF DLADR
DLREC:! BLOCK 1 ;MAXIMUM RECORD LENGTH
DLMOD:! BLOCK 1 ;VERSION OF 85 SOFTWARE
DL10A:! BLOCK 1 ;10-ALIVE INDICATOR
DL10S:! BLOCK 1 ;INITIALIZATION STATUS OF 10
DL11S:! BLOCK 1 ;INITIALIZATION STATUS OF 11
DLIFL:! BLOCK 1 ;INPUT FLAGS
DLIC1:! BLOCK 1 ;INPUT COUNT 1
DLID1:! BLOCK 1 ;INPUT POINTER 1
DLIC2:! BLOCK 1 ;INPUT COUNT 2
DLID2:! BLOCK 1 ;INPUT POINTER 2
DLOFL:! BLOCK 1 ;OUTPUT FLAGS
DLOC1:! BLOCK 1 ;OUTPUT COUNT 1 (HEADER)
DLOD1:! BLOCK 1 ;OUTPUT POINTER 1 (HEADER)
DLOC2:! BLOCK 1 ;OUTPUT COUNT 2 (DATA 1)
DLOD2:! BLOCK 1 ;OUTPUT POINTER 2 (DATA 1)
DLOC3:! BLOCK 1 ;OUTPUT COUNT 3 (DATA 2)
DLOD3:! BLOCK 1 ;OUTPUT POINTER 3 (DATA 2)
BLOCK 200-. ;THE UNUSED PART OF THE WINDOW
DEPHASE
RELOC D75WIN ;SAVE SPACE
SUBTTL PDP-11 INTERFACE
;COME HERE WHEN A PDP11 IS FIRST RECOGNIZED AS BEING A DC75 PDP11
D75III::MOVE J,DLXWIN##(W) ;POINT TO WINDOW
MOVE T1,DLMOD(J) ;PICK UP MOD NUMBER
CAIE T1,1 ;RIGHT?
STOPCD CPOPJ##,DEBUG,DC75WE, ;++DC75 WRONG PDP11 CODE
SETOM DL10A(J) ;MARK 10 AS ALIVE
SETZM DLADR(J) ;CLEAR EXAMINE ADDRESS
SETZM DLDTA(J) ;AND EXAMINE DATA
SETZM DLIFL(J)
HRLI T1,DLIFL(J)
HRRI T1,DLIFL+1(J)
BLT T1,DLOD3(J)
MOVE T1,[PUSHJ P,D75KII]
MOVEM T1,DLXINI##(W) ;INTERRUPT INSTRUCTION
MOVE T1,[XWD MC11FN,C11FTB]
MOVEM T1,DLXCAL##(W) ;CAL11. POINTER
MOVE T1,[PUSHJ P,REMPRG]
MOVEM T1,DLXPRG##(W) ;PURGE INSTRUCTION
SETOM DL10S(J) ;MARK 10 AS RUNNING
HRRZ J,DLXFEK##(W) ;GET THE ADDRESS OF THE FEK
SETOM FEKBSO(J) ;CLEAR OUTPUT ACTIVE
SETOM FEKBSI(J) ; AS WELL AS INPUT ACTIVE
MOVSI T1,FK.ONL ;GET THE ONLINE BIT
IORM T1,FEKBLK(J) ; AND SET IT (CLOCK LEVEL WILL NOTICE)
HRRM W,FEKUNI(J) ;STORE ADDRESS OF DL-10 BASE TABLE
POPJ P, ;DONE WITH INITIALIZATION
;HERE WHEN DL10 INTERRUPTS
D75KII::PUSHJ P,SAVE2## ;SAVE P1 AND P2
HRRZ J,DLXFEK##(W) ;GET FEK ADDRESS
MOVE P1,DLXWIN##(W) ;WINDOW ADDRESS
MOVE P2,DLXOFL##(P1) ;ONLY TO CHECK OUTPUT ARRIVING
; BEFORE INPUT DONE
MOVE T1,FEKBLK(J) ;GET THE FEK'S "FLAGS"
TLNE T1,FK.IAC ; AND SEE IF EXPECTING INPUT DONE
SKIPE DLXIFL##(P1) ;MAKE SURE FLAG SAY'S -11'S DONE
JRST CHKOUT ;NOT EXPECTED OR NOT REAL
HRRZ U,FEKIAD(J) ;PCB ADDRESS
MOVE T1,DLXIC1##(P1) ;COUNT OF INPUT BYTES
HRRM T1,PCBCTR(U) ;STORE IN PCBCTR
IFN PARANOID&P$FEK,<
SKIPGE FEKBSI(J) ;MAKE SURE WE "AOSED" THE LOCK TO GET HERE
PUSHJ P,NTDSTP## ;++ ERROR: INPUT MYSTERIOUSLY BUSY
>
MOVSI T1,FK.IAC ;GET INPUT ACTIVE AND
ANDCAM T1,FEKBLK(J) ; CLEAR IT SO WE DON'T CALL NETSER AGAIN
SETOM FEKBSI(J) ;CLEAR BUSY (RACE FREE. WERE AT PI LEVEL)
IFN FTKL10,<
PUSHJ P,CSDMP## ;CLEAR ANY "VALID" BITS SET BY SOMEONE
> ; "PEEKING" AT THE BUFFER BEING FILLED
MOVEI T1,FI.RDD ;GET INPUT DONE FUNCTION CODE
PUSHJ P,FEKINT##
CHKOUT: MOVE T1,FEKBLK(J) ;GET THE "FLAGS"
TLNE T1,FK.OAC ; AND SEE IF WE'RE WAITING FOR OUTPUT DONE
SKIPE P2 ;SKIP IF -11 CLEARED "BUSY" FLAG
POPJ P, ;NOT EXPECTED OR NO OUTPUT
MOVE U,FEKOAD(J) ;PCB ADDRESS
NETOFF ;CAREFUL WHEN MESSING WITH QUEUES
HRRZM U,FEKODN(J) ;POST THIS PCB AS FILLED
HRRZ U,PCBBLK(U) ;GET THE "NEXT" ONE TO BE FILLED
HRRZM U,FEKOAD(J) ; AND MAKE IT THE FIRST
SOS FEKOCT(J) ;COUNT OFF ONE LESS INPUT PCB
NETON ;CONSISTANT AGAIN
MOVEI T1,FI.ODN ;GET INPUT DONE FUNCTION CODE
PUSHJ P,FEKINT##
IFN PARANOID&P$FEK,<
SKIPGE FEKBSO(J) ;MAKE SURE WE ENTERED WITH THE "AOSE"
PUSHJ P,NTDSTP## ;++ ERROR: OUTPUT MYSTERIOUSLY ACTIVE
>
MOVSI T1,FK.OAC ;GET THE OUTPUT ACTIVE BIT
ANDCAM T1,FEKBLK(J) ; AND CLEAR IT TO SAY WE CAN SEND ANOTHER
SETOM FEKBSO(J) ;SAY WE'RE NO LONGER OUTPUT BUSY
JRST D85WRT ;SEE IF ANOTHER WRITE REQUEST TO PROCESS
;HERE WHEN A DC75 GOES DOWN
REMPRG::PUSH P,J
HRRZ J,DLXFEK##(P2)
MOVEI T1,FI.DWN
PUSHJ P,FEKINT##
HRRM P2,FEKUNI(J)
PJRST JPOPJ##
D85PRE::PUSH P,J
MOVE J,(P2) ;START OF WINDOW
SETZM DLXSWD##(J)
HRLI T1,DLXSWD##(J)
HRRI T1,DLXSWD##+1(J)
BLT T1,DLXOD3##(J)
SETZM DLXNMT##(P2) ;CLEAR NAME
PJRST JPOPJ##
;COME HERE ON CAL11. UUO FROM COMDEV.
;CALLING SEQUENCE IS:
; MOVE AC,[XWD LENGTH,BLOCK]
; CAL11. AC,
; ERROR RETURN
; OK RETURN
;BLOCK: EXP FUNCTION CODE
; ARGUMENT (1) ...
;
;ENTER FROM COMDEV WITH WINDOW POINTER IN P1,
; DL10 BASE IN W, LENGTH OF BLOCK IN T3.
;COMDEV DOES THE DISPATCH BASED ON THE FOLLOWING TABLE. THE
; HIGH ORDER BIT, IF SET, INDICATES THAT THE USER MUST HAVE
; THE "POKE" PRIV.
C11FTB: XWD 400000,DEP11 ;(0) DEPOSIT TO -11
XWD 400000,EXAM11 ;(1) EXAMINE THE -11
XWD 400000,ECOD2## ;(2) ERROR (IN DC76: QUE11)
XWD 0,NAME11 ;(3) RETURN NAME OF PGM IN 11
XWD 0,DOWN11 ;(4) IS PORT UP OR DOWN?
XWD 400000,SND11 ;(5) SEND MESSAGE
XWD 400000,RCV11 ;(6) RECEIVE MESSAGE
XWD 0,TYP11 ;(7) NODE & TYPE
MC11FN==.-C11FTB ;LENGTH OF TABLE
SND11==:CPOPJ##
RCV11==:CPOPJ##
;COME HERE FOR EXAMINE AND DEPOSIT FUNCTIONS
DEP11: PUSHJ P,EXDP11 ;GET ADDR TO DEPOSIT INTO
JRST ECOD4##
SOJL T3,ECOD7## ;GET DATA TO DEPOSIT
PUSH P,W ;SAVE DL10 BASE
PUSHJ P,GETWD1## ;GET THE DATA
POP P,W
MOVEM T1,DLDTA(T2) ;SAVE DATA
MOVEI T1,DLS.DP ;FLAG TO DEPOSIT WORD
HRRZM T1,DLSWRD(T2)
XCT DLXI11##(W) ;WAKE THE 11
MOVEI T1,^D2000
MOVE T3,DLSWRD(T2) ;GET STATUS
TRNE T3,DLS.DP ;TEST IF DEPOSIT OFF
SOJGE T1,.-2 ;KEEP GOING
TRNE T3,DLS.ER ;CHECK BAD ADDRESS
JRST ERRADR ;YES, ERROR CODE 2
SKIPE T1,DLSWRD(T2) ;DID 11 RESPOND ?
JRST ECOD5## ;FATAL ERROR
JRST STOTC1## ;AND GIVE SUCCESS RETURN.
EXAM11: PUSHJ P,EXDP11 ;GET ADDR TO EXAMINE/DEPOSIT
JRST ECOD4##
MOVEI T1,DLS.EX ;FLAG TO EXAMINE
HRRZM T1,DLSWRD(T2)
XCT DLXI11##(W) ;WAKE THE 11
MOVEI T1,^D2000
MOVE T3,DLSWRD(T2) ;GET STATUS
TRNE T3,DLS.EX ;TEST FOR EXAMINE BIT OFF
SOJGE T1,.-2 ;LOOP TILL DONE OR COUNT GOES
TRNE T3,DLS.ER ;BAD ADDRESS?
JRST ERRADR ;YES, ERROR 2
SKIPE DLSWRD(T2) ;DID 11 RESPOND ?
JRST ECOD5## ;FATAL ERROR
MOVE T1,DLDTA(T2) ;YES, FETCH DATA AT THAT ADDRESS
JRST STOTC1## ;AND GIVE SUCCESS RETURN.
ERRADR: SETZM DLSWRD(T2) ;CLEAR ERROR BIT
JRST ECOD2## ;SET ERROR CODE 2
EXDP11: MOVE J,.CPJOB## ;GET JOB NUMBER OF CALLER
MOVE T2,DLXWIN##(W) ;POINT TO WINDOW
SKIPE DLSWRD(T2) ;IS WINDOW FREE ?
POPJ P,
SOJL T3,ECOD7## ;NEED ADDRESS
PUSH P,W ;SAVE DL10 BASE
PUSHJ P,GETWD1## ;GET THE ADDRESS
POP P,W ;RESTORE DL10 BASE
ANDI T1,177777 ;SIXTEEN BITS ONLY
MOVEM T1,DLADR(T2) ;STORE ADDRESS
JRST CPOPJ1##
;COME HERE TO RETURN THE NAME OF THE PDP-11 PROGRAM.
NAME11: MOVE T1,DLXNMT##(W) ;PICK UP NAME
JRST STOTC1## ;SKIP RETURN, GIVING NAME
;COME HERE TO TELL THE STATUS OF THE PDP-11 PROGRAM.
DOWN11: SKIPG T1,DLXDWN##(P1) ;GET STATUS
TDZA T1,T1 ;PDP-11 IS DOWN
MOVEI T1,1 ;UP.
JRST STOTC1## ;SKIP RETURN.
;HERE TO REPORT NODE & TYPE
TYP11: MOVE T1,DLXFEK##(W) ;POINT TOFEK
HRLZ T1,FEKNNM(T1) ;GET NODE NUMBER
HRR T1,DLXTYP##(W) ;GET TYOE OF FRONT END
PJRST STOTC1## ;RETURN
$LIT
D85END::END