Trailing-Edge
-
PDP-10 Archives
-
custsupcuspmar86_bb-x130b-sb
-
fpr2a.doc
There are 7 other files named fpr2a.doc in the archive. Click here to see a list.
FPR2A.DOC -- Changes from V2 to V2A(44)
March 1979
COPYRIGHT (C) 1974,1978,1979 BY
DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
TRANSFERRED.
THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.
DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
FPR2A.DOC Page 2
1.0 SUMMARY
This release of FACTPR adds support for FACT entries written by UMOUNT
and OMOUNT, Version 26, (code 271). No other changes have been made
and no restrictions or bugs attended to.
It has been tested with 5.07/5.07A/6.01A in-house. It has not been
tested in-house on 5.06 monitors but is meant to work on them.
2.0 EXTERNAL CHANGES
The MOUNT entries are very much like the SPOOL entry except for the
following words:
0 CODE = 271
Job number is UMOUNTer's job number unless that job logged
off; else, and for OF entries, it is OMOUNT's job number.
1 User's PPN.
3 QUE = 1st letter of program (O or U) concatenated with 1st
letter of command (M or D or F). 'UF' is not used.
10 The device mounted, dismounted or used in a FILE command.
11 0
12 F,,TIME
F = 0 if request failed.
F = 1 if successful.
TIME = time in seconds OMOUNT dedicated to this
request.
To implement the support of code 271, FACTPR has been changed to
process MOUNT entries like SPOOL entries except for the units word.
In place of the sibgle item in 'FET1' and 'FET2', two entries are
added. The first prints the L.H. (MOUNT flags) as 4 characters
starting at column 89, and the second prints the R.H. (clock time) as
7 characters starting at column 93.
FPR2A.DOC Page 3
3.0 KNOWN BUGS AND DEFICIENCIES
The are two known bugs.
1. The station number in spool entries is octal and not decimal.
2. The runtime in spool and mount entries is converted to ticks
instead of milliseconds for DATE75 format.
The following source compare provides the fixes for the above two
problems:
^^
File 1) DSKB:FACTPR.MAC[10,2162] created: 0955 08-MAR-1977
File 2) DSKB:FACTPR.OLD[10,2162] created: 0953 08-MAR-1977
1)1 SUBTTL R CLEMENTS/RCC/CMF/PFC %2(44) 18-Sep-75
1) VWHO==0
****
2)1 SUBTTL R CLEMENTS/RCC/CMF/PFC %2(42) 16-OCT-74
2) VWHO==0
**************
1)1 VEDIT==44
1) ;+
****
2)1 VEDIT==43
2) ;+
**************
1)26 XWD 40,OCTP2 ;12 STATION NUMBER
1) XWD 34,DECP6 ;13 APR SERIAL NUMBER
****
2)26 XWD 40,DECP2 ;12 STATION NUMBER
2) XWD 34,DECP6 ;13 APR SERIAL NUMBER
**************
1)34 TICK7: TLNE F,L.NDTF ;NEW FORMAT
1) JRST MST7 ;YES, IT'S REALLY MSTIME
1) IDIV T1,JIFSEC ;[34] CONVERT TO SECONDS
1) MOVE T3,JIFSEC ;[34]
****
2)34 TICK7: IDIV T1,JIFSEC ;[34] CONVERT TO SECONDS
2) MOVE T3,JIFSEC ;[34]
**************
1)39 OCTP2: SKIPA BP,[060300,,T1]
1) OCTP12: MOVE BP,[440300,,T1]
****
2)39 OCTP12: MOVE BP,[440300,,T1]
**************
FPR2A.DOC Page 4
4.0 INSTALLATION INSTRUCTIONS
None.
5.0 INTERNAL CHANGES
None.
[End of FPR2A.DOC]
[FPR2.DOC is appended as an integral part of FPR2A.DOC]
FPR2.DOC Page 5
FACTPR.DOC -- Changes from V1 to V2
October 1974
1.0 SUMMARY
This version cleans up all the error processing, ensures that the
format is always followed, adds a file identification record, adds all
the CS2 changes, adds an assembly option to produce COBOL SIXBIT
files, and supports the DATE75 project.
There are no known deficiencies; no SPRs were reported which
generated code fixes. It should work on all monitors and has been
tested on 5.07/6.01.
FACTPR is not documented since it is an unsupported program.
PURPOSE OF FACTPR: It reads the system accounting files (SYS:FACT.*)
and writes an ASCII file in a fixed format which can be processed by a
COBOL billing program. The program has no operational options; each
time it runs it reads all accounting files and produces a single
output file.
2.0 EXTERNAL CHANGES
Edit #
4 Remove the PRINTX and OUTSTR warning of the unsupported nature
of this program. It is still unsupported.
5 Handle DATE-75, especially in the FACT files.
6 Use symbols from C.MAC.
7 Ignore the CCL entry point.
10 Remove unused symbols in the source.
11 Output to DSK:, not to LPT:.
12 Output errors to TTY: also.
13 Standardize all error messages.
14 Replace all error EXITs with error messages.
15 Recode to speed up line handling and suppress trailing spaces.
16 Handle possible overflow items by setting to the maximum the
output field will allow (all 9s).
FPR2.DOC Page 6
17 Support FACT items 120 and 260.
20 Change channel and accumulator references to be mnemonic.
21 Support FACT item 231 for SPRINT.
22 Catch remaining cases of DATE-75 in new format entries.
23 Pass over but notice unknown entry types. Dump in octal in
file.
24 Fix code to catch FACT.SYS once.
25 For CS2 only, make odd customer codes be new date format.
26 Add assembly option to output COBOL SIXBIT files instead of
ASCII.
27 Add more checks on unknown entries.
30 For CS2 only, read *.FCT not FACT.*.
31 Place all CS2 special code under FT$CS2.
32 For CS2 only, add new tables for customer codes.
33 For CS2 only, handle their incorrect use of old LOGIN entry.
34 Convert spooler runtime correctly.
35 Defend against full output line.
36 Add CS2 entry 502; expand 000 entry line.
37 Fix CS2 entry 500.
40 Use C as a universal; standardize the feature test names;
default FT$SIX under FT$CS2. Set default MAXENT to 25 (10).
41 Make spooler units only 27 bits wide.
42 Convert to sharable program.
3.0 KNOWN BUGS AND DEFICIENCIES
None.
FPR2.DOC Page 7
4.0 INSTALLATION INSTRUCTIONS
Now is a .SHR instead of a .SAV file and gets built with C as a
universal and loaded with SCAN.REL in library search mode.
5.0 INTERNAL CHANGES
None.
[End of FPR2.DOC]