Trailing-Edge
-
PDP-10 Archives
-
cuspmar86binsrc_2of2_bb-fp63a-sb
-
10,7/galaxy/mount/mount.mac
There are 3 other files named mount.mac in the archive. Click here to see a list.
TITLE MOUNT MDA user interface program
SUBTTL P. Taylor/PJT/LWS 29-Feb-84
;
;
;
; COPYRIGHT (c) 1975,1976,1977,1978,1979,1980,1981,1982,
; 1983,1984,1985,1986
; DIGITAL EQUIPMENT CORPORATION
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH GLXMAC ;Get Galaxy symbols
PROLOG (MOUNT)
SEARCH ORNMAC,QSRMAC,MNTMAC
EXTERN PARSER,P$HELP
PARSET ;Declare external Parser routines
;Version Information
MOUVER==2 ;MAJOR VERSION
MOUMIN==0 ;MINOR VERSION
MOUEDT==:0100 ;EDIT LEVEL
MOUWHO==0 ;WHO LAST EDITED (0=DEC DEVELOPMENT)
VMOUNT==<VRSN.(MOU)> ;Get the version level
TWOSEG ;Make us sharable
RELOC 400000 ;Code goes here
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1971,1986.
ALL RIGHTS RESERVED.
\;END OF COPYRIGHT MACRO
SUBTTL Table of contents
SUBTTL Revision History
COMMENT \
Edit Comment
0001 Initial version of MOUNT
0002 Include new P$HELP facility
0003 Initial bug fixes and remove /AFF and /SEP
0004 Decouple /NOTIFY and /NOWAIT
0005 Separate MOUNT parsing code so it may be used with
BATALC for preallocation parsing of control files.
0006 Fix MOUNT/CHECK and ALLOCATE/CHECK
0007 Clear JACCT and Show all users by default
Add MODIFY command not yet implemented message
0010 Add support for M7: and M9: compatability.
0011 Do not default WRITE-LOCKED for tapes
0012 Add support for generic mount requests.
0013 Add support for new DEALLOCATE/DISMOUNT switches /NOTIFY/NOWAIT/WAIT
0014 Fix generic mounts from turning into magtape mounts unless generic MTA.
0015 Remove feeble attempt to parse /VID or /REMARK switches that quotes
strings with single quotes. The old UMOUNT CUSP used to handle this
but we can't do it right. In addition, the break mask for an unquoted
string has been changed to allow only 0-9, -, A-Z and a-z. This is
consistant (except for the dash) with SCAN's string parsing logic.
0016 DO not send a .SMALI block for TOPS10 (TOPS20 only)
0017 Allow /UNLOAD switch on DISMOUNT or DEALLOCATE command for consistancy
with the old UMOUNT syntax.
0020 Instead of bitching when the user types MOUNT or ALLOCATE with no
arguments, give a listing instead. This is consistant with the other
QUEUE class commands.
0021 Change unlabeled label type to USER-EOT and remove BLP
0022 Add UNLABELED and make it synonomous with NOLABELS.
Put BLP label type back in and make it synonomous with
BYPASS.
0023 Don't clear JACCT on startup. It shouldn't be set.
0024 Use job number for PID.
0025 Complain if the user supplies a logical name on structure requests.
0026 Make MOUNT easily link with GLXLIB. Now all code can be in the high
segment!!
0027 Flush the IPCF queue during initialization.
Make /NOWAIT imply /NOTIFY
Add /NONOTIFY for bozo's who really do not want /NOTIFY on /NOWAIT
0030 Do not insert '[' or ']' on the acks from MDA
0031 Do not allow physical/generic volume set names in the ALLOCATE cmd.
0032 Tell user there is no operator coverage
0033 Improve error messages instead of ?FOO may not be mounted
0034 Make CSSE happy and impliment /VID:xxx on DISMOUNT/DEALLOCATE
0035 Look for separate help files for each command that invokes MOUNT.
Don't use P$HELP since requires lots of stack space that never gets
used. Remove /DRIVES and /STRUCTURE-ID switches since they were
never implemented. Decrease the stack size from 200 to 70.
0036 Make DISMOUNT/DEALLOCATE /NOTIFY work
Also fix .MOUNT/WAIT so it does not send a garbage message
0037 Make it so that generic device mounts are illegal in $STEP batch headers
0040 Don't let OPRPAR rescan the command line. There are lots of major
OPRPAR/GLXSCN/GLXKBD problems.
0041 Fix edit 37 so we are no so restrictive with generic mounts
0042 Allow DISMOUNT xxx/UNLOAD
0043 QUEUE. UUO block made MOUNT have a non-null low segment
0044 P$WLDF requires a user to explicity type * for wildcarding job
names. That's a lose cuz you can't type CAN PRI /SEQ:54. Don't
do that.
0045 Check to see if user logical name already exists. If so, issue a
warning, and clear the old definition.
0046 Don't use a PFH. It will slow things down.
0047 Lost edit 43 somewhere. Put it back
0050 DISMOUNT/VID:xxx does not tell the OPR enough about the user.
Add code to dump out the volume set name and unit if we can
determine it.
0051 Remove /SEQUENCE. GCO 1295
0052 Don't do logical name checking if batch prescan. GCO 1388
0053 Add code to MNTPAR in MOUN25 and MOUN30 to support the
ENABLE/DISABLE queue functionality for disks and tapes.
NO SPR 21-SEP-83/CTK
0054 Remove edit 53 because it broke logical names.
NO SPR 20-FEB-84/CTK
0055 Add code to use a semi-unique ACK code for mount requests send
to QUASAR.
Requires QUASAR edit #1173
SPR 10-34182 4-Feb-84 /LWS
0056 Make MOUNT /CHECK and MOUNT <CR><LF> work the way they should.
29-Feb-84 /LWS
0057 Redo code on TTYRSC to handle line continuation.
SPR 10-34857 GCO 10091 13-Sep-84 /LWS
** Version 2 edits start here **
0100 Add support for SHOW QUEUE EVENTS.
GCO 10129 11-Dec-84 /LWS
\ ;end revision history
SUBTTL Constants and assembly parameters
XP PDLEN,^D70 ;Push down list length
XP TTYSIZ,<^D500/5>+1 ;[57] TTY buffer size (500 characters)
;Interrupt channel assignments
XP .ICIPC,1 ;IPCF interrupt channel
LOC 137
.JBVER: EXP VMOUNT ;Declare version number
RELOC
;Entry vector definition
ENTVEC: JRST BEGIN ;MAIN ENTRY POINT
JRST BEGIN ;REENTRY POINT
EXP VMOUNT ;VERSION OF PROGRAM
SUBTTL Initialization
BEGIN: JFCL ;Ignore CCL start
RESET
MOVE P,[IOWD PDLEN,PDL] ;Set up user stack
SETZM DATORG ;Clear impure storage
MOVE S1,[DATORG,,DATORG+1] ; Our first location thru
BLT S1,DATEND-1 ; Last location of storage
MOVE S1,[IBBLK,,IB] ;Set up IB
BLT S1,IB+IB.SZ-1
MOVE S1,[PIBBLK,,PIB] ;Set up PIB
BLT S1,PIB+PB.MNS-1
TOPS10 <
MOVEI S1,INTIPC ;IPCF interrupt
MOVEM S1,IPCINT+.PSVNP
>
TOPS20 <
MOVE S1,[1,,INTIPC] ;IPCF interrupt
MOVEM S1,CHNTAB+1
>
MOVEI S1,IB.SZ
MOVEI S2,IB
$CALL I%INIT ;Get the library
$CALL JOBPRM ;Read initial JOB parameters
PUSHJ P,TTYRSC ;RESCAN THE INPUT BUFFER
SETOM BATJOB## ;INDICATE NOT A BATCH JOB
SETZB S1,S2 ;Don't want timer interrupts for parser
$CALL P$INIT ;Initialize parser routines
$CALL I%ION ;Enable interrupts
PUSHJ P,C%RECV ;Flush the IPCF queue
JUMPT .-1 ;Got one,,get another
MOVEI S1,INI010 ;Setup parser arg block
MOVEM S1,PAR.TB+PARBLK ;Store Table address
MOVEI S1,[ASCIZ//]
MOVEM S1,PAR.PM+PARBLK ;Store null prompt
MOVEI S1,CMDBLK
MOVEM S1,PAR.CM+PARBLK ;Store address to return args
MOVEI S1,TTYBUF ;POINT TO TTY BUFFER
MOVEM S1,PAR.SR+PARBLK ;PARSE COMMAND FROM THERE
JRST GETCMD ;Start processing commands
SUBTTL Parser and Command dispatch
GETCMD: MOVE P,[IOWD PDLEN,PDL] ;Reset stack
MOVEI S1,CMD.SZ ;Clear initial arguments
MOVEI S2,CMDBLK
$CALL .ZCHNK
MOVEI S1,COM.SZ-1
STORE S1,.MSTYP+CMDBLK,MS.CNT ;Set initial size
MOVEI S1,PAR.SZ ;Get size of parser block
MOVEI S2,PARBLK ;Point to it
$CALL PARSER ;Parse the command
JUMPT GETCM1 ;Onward if command parsed ok
CMDERR: MOVE S1,PRT.FL(S2) ;Get the flags
MOVE S2,PRT.EM(S2) ;Get the address of error text
TXNE S1,P.CEOF ;End of file on RESCAN?
MOVEI S2,[ASCIZ/Invalid command terminator/]
$ERR (<^T/0(S2)/>)
JRST GETCM2 ;Check for next command
GETCM1: MOVEI S1,COM.SZ+CMDBLK ;Point to first argument
$CALL P$SETU ;Setup for second pass
$CALL P$KEYW ;Get keyword value
JUMPF [$ERR(Internal command keyword table error)]
$CALL 0(S1) ;Call the processor
GETCM2: PJRST .EXIT ;Finish the prog
ERROR:: PUSH P,TF ;Save the calling args
PUSH P,S1
PUSH P,S2
ERRO1: MOVN S1,JOBNUM ;Wait until output is finished
JOBSTS S1,
SETZ S1,
TXNE S1,JB.UOA ;Any output waiting?
JRST [MOVEI S1,1 ;Yes..wait for completion
$CALL I%SLP
JRST ERRO1]
$CALL K%TPOS ;Get terminal position
SKIPE S1 ;At column 0?
$TEXT ;No..make it so
POP P,S2
POP P,S1 ;Restore error argument
POP P,TF
MOVE TF,@TF
$TEXT (,?^I/@TF/) ;Display the error
.EXIT: PJRST I%EXIT ;Thats all folks
SUBTTL Initialization and Keyword dispatch tables
INI010: $INIT(KEY010) ;Parse initialization
KEY010: $KEYDSP(KEY020,<$ERRTXT(MOUNT must be invoked as a command)>)
KEY020: $STAB ;Main command keyword table
DSPTAB(ALL010##,ALLOC,<ALLOCATE>)
DSPTAB(CAN010,.CANCE,<CANCEL>)
DSPTAB(DEA010,.DEALL,<DEALLOCATE>)
DSPTAB(DIS010,.DISMO,<DISMOUNT>)
DSPTAB(MOU010##,MOUNT,<MO>) ;MO is OK for MOUNT
DSPTAB(MOD010,.MODIFY,<MODIFY>)
DSPTAB(MOU010##,MOUNT,<MOUNT>)
DSPTAB(SHO010,.SHOW,<SHOW>)
$ETAB
WLDBRK: 777777,,777760 ;Break on all control
767554,,001740 ;Allow % * - 0-9 and ?
400000,,000760 ;Allow A-Z
400000,,000760 ;Allow LC A-Z
SUBTTL ALLOC and MOUNT
ALLOC: $CALL M%GPAG ;Get a page to parse into
$CALL .ALLOC## ;Parse the rest
;**;[56] Change 1 line at ALLOC+2L. /LWS
TXNE F,FL.CHK+FL.LST ;[56] Was /CHECK or implied /LIST specified?
PJRST CHKALC ;Yes..check the allocation
$CALL SNDQSR ;Request the ACK
$CALL RCVQSR ;Recieve it
$RETT
MOUNT: $CALL M%GPAG ;Get a page to parse into
PUSHJ P,.MOUNT## ;Parse the rest
TXNE F,FL.CHK+FL.LST ;[56] Was /CHECK or implied /LIST specified?
PJRST CHKMNT ;Yes..go check the queues
$CALL SNDQSR ;Send off the request
$CALL RCVQSR ;Get the first ACK
$RETIF ;Return if this fails
TXNE F,FL.WAT ;Want to wait?
$CALL RCVQSR ;Yes..hang around
$RETIF ;Return if this fails
$RETT ;Otherwise, say win
SUBTTL CANCEL command
;CANCEL command syntax tables
CAN010: $KEY(CAN030,CAN011,<$ALTER(CAN020),$ERRTXT(Request type must be specified)>)
CAN011: $STAB
KEYTAB(.OTBAT,<BATCH-REQUEST>)
KEYTAB(.OTCDP,<CARD-PUNCH-REQUEST>)
KEYTAB(.OTMNT,<MOUNT-REQUEST>)
KEYTAB(.OTPTP,<PAPER-TAPE-REQUEST>)
KEYTAB(.OTPLT,<PLOTTER-REQUEST>)
KEYTAB(.OTLPT,<PRINTER-REQUEST>)
$ETAB
CAN020: $SWITCH(,CAN021)
CAN021: $STAB
DSPTAB(,HELPER,<HELP>)
$ETAB
CAN030: $NUMBER(CAN040,^D10,<Request number>,$ALTER(CAN031))
CAN031: $FIELD(CAN040,<Request name>,$BREAK(WLDBRK))
CAN040: $SWITCH(,CAN042,$ALTER(CAN050))
CAN042: $STAB
DSPTAB(CAN043,CN$JOB,<JOBNAME>)
DSPTAB(CAN045,CN$USE,<USER>)
$ETAB
CAN043: $FIELD(CAN040,<Request name>,$BREAK(WLDBRK))
CAN045: $USER(CAN040,$ALTER(CAN040))
CAN050: $CRLF(,$ERRTXT(Invalid CANCEL command))
;CANCEL command
.CANCE: MOVEI S1,PAKSIZ ;Clear message
MOVEI S2,PACKET
$CALL .ZCHNK
MOVE S1,['CANCEL']
MOVEM S1,CMDNAM## ;Save incase help was typed
$CALL DOSWS##
MOVEI P1,PACKET ;P1 contains message address
MOVEI P2,KIL.RQ(P1) ;P2 points to request object
MOVEI S1,.QOKIL ;Get kill message type
STORE S1,.MSTYP(P1),MS.TYP ;Save in the message
MOVX S1,MF.ACK ;Request an ACK
MOVEM S1,.MSFLG(P1)
MOVE S1,USRNUM ;Get default user
MOVEM S1,.RDBOI(P2) ;Save in the message
SETOM .RDBOM(P2) ;Set user mask
$CALL P$KEYW ;Get the queue type
MOVEM S1,KIL.OT(P1) ;Save requested object type
CAXE S1,.OTMNT ;Is it a CANCEL MOUNT?
JRST CANCE2 ;No..don't store VSN
$CALL P$FLD ;Yes..get VSN
JUMPF CANCE2 ;Must be request number
ADD S1,[POINT 7,ARG.DA] ;Point to source string
MOVEI S2,.RDBVS(P2) ;Point to destination
HRLI S2,(POINT 7)
$CALL CPYSTR##
JRST CANCE1 ;Get confirmation
CANCE2: $CALL P$NUM ;Get request number
JUMPF [$CALL CN$JOB ;Failed..Must be jobname
JRST CANCE1] ;On to get confirmation
MOVEM S1,.RDBRQ(P2) ;Save request number
CANCE1: $CALL P$CFM ;Parse confirmation?
JUMPT CANCE3 ;Yes..finish up
$CALL P$SWITCH ;Parse a switch?
$CALL 0(S1) ;Yes..call the processor
JRST CANCE1 ;Try confirmation again
CANCE3: MOVEI S1,KIL.SZ+10 ;Get size of kill message
STORE S1,.MSTYP(P1),MS.CNT ;Store the count
MOVEI S2,PACKET
$CALL SNDQSR ;Send it off
$CALL RCVQSR ;Recieve the list answer
$RETT
CN$JOB: $CALL P$WLDF ;Parse wild JOBNAME
SKIPT
$ERR (<Invalid request name>)
MOVEM S1,.RDBJB(P2)
MOVEM S2,.RDBJM(P2)
$RETT
CN$USE: $CALL P$USER ;Get the user number
MOVEM S1,.RDBOI(P2) ;Save it in the message
$RETT
SUBTTL DEALLOCATE and DISMOUNT commands
;DEALLOCATE and DISMOUNT syntax tables
DIS010:
DEA010: $SWITCH(,DEA011,$ALTER(DEA020))
DEA011: $STAB
DSPTAB(,HELPER,<HELP>)
DSPTAB(DEA010,DE$NNT,<NONOTIFY>)
DSPTAB(DEA010,DE$NOT,<NOTIFY>)
DSPTAB(DEA010,DE$NOW,<NOWAIT>)
DSPTAB(DEA010,DE$REM,<REMOVE>)
DSPTAB(DEA010,DE$REM,<UNLOAD>)
DSPTAB(DIS011,DISVID,<VID>) ;Ala REMARK
DSPTAB(DEA010,DE$WAI,<WAIT>)
$ETAB
DIS011: $QUOTE(DEA010,,$ALTER(DIS020))
DIS020: $FIELD(DEA010,,$BREAK(REMBRK))
DISVID: $CALL P$QSTR ;Get quoted string
SKIPT ;Win !!!
$CALL P$FLD ;Or simple field
PUSH P,S1 ;Save the string address
MOVEI S1,-1(S2) ;Get the length in S1
JUMPLE S1,.RETT ;Can't be null !!!
PUSHJ P,M%GMEM ;Get some memory for it
HRLM S1,VIDBLK ;Save the block length
MOVEM S2,VIDADR ;Save the block address
POP P,S2 ;Restore the string address
MOVSI S2,ARG.DA(S2) ;Get source,,0
HRR S2,VIDADR ;Get source,,destination
ADD S1,VIDADR ;Get end address
BLT S2,-1(S1) ;Save the string
MOVEI S2,.QUWTO ;SET
MOVEM S2,OPRNOT ; UP
MOVEI S2,.QBMSG ; QUEUE.
HRRM S2,VIDBLK ; BLOCK
$RETT
REMBRK: 777777,,777760 ;Break on all control
777754,,001760 ;Allow - and 0-9
400000,,000760 ;Allow A-Z
400000,,000760 ;Allow LC A-Z
DEA020: $FIELD(DEA030,<volume set name>,$BREAK(VSNBRK##))
DEA030: $TOKEN(DEA040,<:>,<$FLAGS(CM%SDH),$ALTER(DEA040)>)
DEA040: $SWITCH(,DEA041,$ALTER(DEA050))
DEA041: $STAB
DSPTAB(DEA040,DE$NNT,<NONOTIFY>)
DSPTAB(DEA040,DE$NOT,<NOTIFY>)
DSPTAB(DEA040,DE$NOW,<NOWAIT>)
DSPTAB(DEA040,DE$REM,<REMOVE>)
DSPTAB(DEA040,DE$REM,<UNLOAD>)
DSPTAB(DIS030,DISVID,<VID>) ;Ala REMARK
DSPTAB(DEA040,DE$WAI,<WAIT>)
$ETAB
DIS030: $QUOTE(DEA040,,$ALTER(DIS040))
DIS040: $FIELD(DEA040,,$BREAK(REMBRK))
DEA050: $COMMA(DEA020,$ALTER(DEA060))
DEA060: $CRLF(,$ERRTXT(Invalid DEALLOCATE command))
;DEALLOCATE and DISMOUNT commands
.DEALL: TDZA F,F ;Clear all flags
.DISMO: MOVX F,FL.MOU ;Use mount flag for dismount
TXO F,FL.WAT ;Default to /WAIT
SETZM VIDADR ;Clear the /VID text address
MOVE S1,['DISMOU'] ;Assume dismount
TXNN F,FL.MOU
MOVE S1,['DEALLO']
MOVEM S1,CMDNAM## ;Save for /HELP
$CALL DOSWS ;Get sticky switches
MOVEM F,DEFSWS
SETZM ACKCNT ;Clear count of expected ACKs
DEAL10: MOVE F,DEFSWS ;Reclaim sticky switches
MOVEI S1,PAKSIZ ;Clear packet for message
MOVEI S2,PACKET
$CALL .ZCHNK
MOVE P1,S2 ;P1 points to message
MOVEI P2,.OHDRS(P1) ;P2 points to free word
MOVEI S1,.QODVS ;Dismount message type
STORE S1,.MSTYP(P1),MS.TYP
MOVX S1,MF.ACK ;Request an ACK
MOVEM S1,.MSFLG(P1) ;Set the message flag
$CALL P$FLD ;Get the field
SKIPN ARG.DA(S1) ;Null?
$ERR (<Device field must be specified>)
MOVEM S1,VSNADR## ;Save address of argument
HRROI S1,ARG.DA(S1) ;Point to argument
$CALL S%SIXB ;Convert to sixbit
MOVEM S2,VSNAME## ;Save Sixbit
SETZM VSNDEV## ;No device name yet...
$CALL P$TOK ;Get optional ":"
$CALL DOSWS ;Get optional switches
TXNN F,FL.MOU ;DEALLOCATING?
JRST DEAL20 ;YES, TALK TO QUASAR
TOPS10<
MOVE S2,VSNAME## ;Get sixbit volume-set-name
DEVNAM S2, ;Get real device name
JRST DEAL20 ;Treat as volume-set name if not device
MOVEM S2,VSNDEV## ;Save actual device name
MOVE S1,S2 ;Put name in S1
MOVEI S2,.RECDV ;Argument type is device
$CALL ADDARG## ;Add the argument
MOVE S1,VSNDEV## ;GET THE DRIVE NAME
DEVTYP S1, ;Get device type
$ERR (<Unknown device type>)
LOAD S2,S1,TY.DEV ;Get actual device type
CAIN S2,.TYDSK ;Is it disk?
JRST [MOVE S1,VSNDEV## ;Get the device name
MOVEM S1,VIDCHR+.DCNAM ;Save it
MOVE S1,[.DCUID+1,,VIDCHR] ;Get DSKCHR parms
DSKCHR S1, ;Get disk characteristics
JRST DEAL40 ;Failed,,skip this
MOVE S1,VIDCHR+.DCUPN ;Get the unit its mounted on
MOVEM S1,VSNDEV## ;Save it
JRST DEAL40 ] ;Continue
MOVEI S1,0 ;No..Deassign it
MOVE S2,VSNDEV##
REASSI S1,
SKIPGE S1 ;Did we win?
$ERR (<^W/VSNDEV/ was not mounted>)
$TEXT (,[^W/VSNDEV/ dismounted])
JRST DEAL45 ;Check for more to do
> ;End TOPS10
DEAL20: MOVE S1,VSNADR## ;Retrieve VSN text address
LOAD S2,ARG.HD(S1),AR.LEN ;Get length of argument
$CALL CPYARG## ;Copy the argument
MOVEI S1,.RCTVS ;Set proper type
STORE S1,ARG.HD(S2),AR.TYP
DEAL40: MOVE S1,P2 ;Get free address
SUB S1,P1 ;Compute length
STORE S1,.MSTYP(P1),MS.CNT
SETZM S2 ;Clear message flags
TXNN F,FL.MOU ;Dismount?
TXO S2,MM.DLC ;No..Deallocate
TXZE F,FL.RMV ;Removing?
TXO S2,MM.REM ;Yes..set the message flag
TXNE F,FL.WAT ;Are we waiting ???
TXO S2,MM.WAT ;yes,,set it
TXNE F,FL.NOT ;Wants notify ???
TXO S2,MM.NOT ;Yes,,set it
MOVEM S2,.OFLAG(P1) ;Store the flags
MOVEI S2,PACKET
$CALL SNDQSR ;Send off the request
AOS ACKCNT ;Bump the count of expected ACKs
DEAL45: PUSHJ P,NOTOPR ;Notify OPR for /VID if we have to
$CALL P$COMMA ;Multiple fields?
JUMPT DEAL10 ;Yes..get the next
$CALL P$CFM ;Get confirmation
JUMPF [$ERR<Internal command syntax table error>]
DEAL50: TXNE F,FL.WAT ;Want to wait ?
SOSGE ACKCNT ;Yes - recieved all ACKS?
$RETT ;Yes..just return
$CALL RCVQSR ;No..go recieve one
JRST DEAL50 ;Get the next
NOTOPR: SKIPN VIDADR ;Was a /VID switch specified ??
$RET ;No VID,,return
$SAVE <VIDADR,VIDBLK> ;Save the text address and length
HLRZ S1,VIDBLK ;Get the block length
ADDI S1,^D20 ;Add 20 words
PUSHJ P,M%GMEM ;Allocate some more buffer space
HRLM S1,VIDBLK ;Reset the block length
EXCH S2,VIDADR ;Save new, get old text address
MOVE S1,VIDADR ;Get the new text address
TLO S1,(POINT 7,0) ;Gen a byte pointer to the buffer
MOVEM S1,VIDPTR ;Save it
MOVE S1,VSNADR## ;Get the volume set name address
$TEXT (SAVBYT,<Volume set: ^T/ARG.DA(S1)/^A>)
SKIPE VSNDEV## ;Any unit ???
$TEXT (SAVBYT,<, on unit: ^W/VSNDEV/^A>)
MOVE S1,VIDADR ;Get the VID text block address
$TEXT (SAVBYT,<^M^J^T/(S2)/>)
MOVE S1,[5,,OPRNOT] ;Get QUEUE. UUO parms
QUEUE. S1, ;Yes,,tell the operator
JFCL ;Ignore the error
HLRZ S1,VIDBLK ;Get the text buffer length
MOVE S2,VIDADR ;And the buffer address
PUSHJ P,M%RMEM ;Return the temp buffer
$RETT ;Return
SAVBYT: IDPB S1,VIDPTR ;Save the byte
$RET ;Return
; /NOWAIT switch processor
;
; /NOTIFY switch processor
;
DE$NOW: TXZ F,FL.WAT ;Don't wait,,imply /NOTIFY
DE$NOT: TXOA F,FL.NOT ;Notify us
DE$NNT: TXZ F,FL.NOT ;No Notify
$RETT ;Return
; /REMOVE switch processor
;
DE$REM: TXO F,FL.RMV ;Set the flag
$RETT
; /WAIT switch processor
;
DE$WAI: TXO F,FL.WAT ;Wait
$RETT ;Return
SUBTTL MODIFY command (Not yet implemented)
MOD010: $CTEXT
.MODIF: $ERR(MODIFY command not yet implemented)
SUBTTL SHOW command
;SHOW command syntax tables
SHO010: $KEYDSP(SHO011,$ALTER(SHO020))
SHO011: $STAB
DSPTAB(SHO050,.SHALL,<ALLOCATION>)
DSPTAB(SHO030,.SHQUE,<QUEUES>)
$ETAB
SHO020: $SWITCH(,SHO021,$ERRTXT(Invalid SHOW parameter))
SHO021: $STAB
DSPTAB(,HELPER,<HELP>)
$ETAB
SHO030: $NOISE(SHO031,<OF>)
SHO031: $KEY(SHO040,SHO032,<$DEFAULT(ALL),$ALTER(SHO040)>)
SHO032: $STAB
KEYTAB(LIQALL_-^D18,<ALL-REQUESTS>)
KEYTAB(LIQBAT_-^D18,<BATCH-REQUESTS>)
KEYTAB(LIQCDP_-^D18,<CARD-PUNCH-REQUESTS>)
KEYTAB(LIQEVT_-^D18,<EVENTS>)
KEYTAB(LIQMNT_-^D18,<MOUNT-REQUESTS>)
KEYTAB(LIQOUT_-^D18,<OUTPUT-REQUESTS>)
KEYTAB(LIQPTP_-^D18,<PAPER-TAPE-REQUESTS>)
KEYTAB(LIQPLT_-^D18,<PLOTTER-REQUESTS>)
KEYTAB(LIQLPT_-^D18,<PRINTER-REQUESTS>)
TOPS20< KEYTAB(LIQRET_-^D18,<RETRIEVAL-REQUESTS>) >
$ETAB
SHO040: $SWITCH(,SHO042,$ALTER(SHO050))
SHO042: $STAB
DSPTAB(SHO040,SQ$ALL,<ALL>)
DSPTAB(SHO040,SQ$BRI,<BRIEF>)
DSPTAB(SHO040,SQ$FUL,<FULL>)
DSPTAB(SHO044,SQ$USE,<USER>)
$ETAB
SHO044: $USER(SHO040,$ALTER(SHO040))
SHO050: $CRLF(,$ERRTXT(Invalid SHOW command))
CHKALC: $SAVE <P1,P2>
MOVEI S1,PAKSIZ ;Point to message
MOVEI S2,PACKET
$CALL .ZCHNK
MOVEI P1,PACKET ;Point to message header
MOVEI P2,.OHDRS(P1) ;Point to free word
MOVEI S1,.QOLAC ;List allocation state
STORE S1,.MSTYP(P1),AR.TYP ;Store message type
MOVE S1,JOBNUM ;Get users job number
MOVEI S2,.ORJNU ;Get block type
$CALL ADDARG## ;Store the argument
MOVE S1,P2 ;Compute message length
SUB S1,P1
STORE S1,.MSTYP(P1),MS.CNT
MOVEI S2,PACKET ;Point to the packet
$CALL SNDQSR ;Request the ACK
$CALL RCVQSR ;Recieve it
$RETT
CHKMNT: MOVE S1,[LIQMNT_-^D18] ;Get mount queue type
$CALL CHKQUE ;Build proper message
$CALL SNDQSR ;Request the ACK
$CALL RCVQSR ;Recieve it
$RETT
CHKQUE: $SAVE <P1,P2> ;Preserve some AC's
MOVE T1,S1 ;Remember the type for a while
MOVEI S1,PAKSIZ ;Clear message
MOVEI S2,PACKET
$CALL .ZCHNK
MOVEI S1,.QOLIS ;Get list message type
STORE S1,.MSTYP(S2),MS.TYP ;Save in the message
MOVE S1,T1 ;Reclaim queue type
MOVEI P1,PACKET ;P1 contains message address
MOVEI P2,.OHDRS(S2) ;P2 contains argument address
MOVE S2,[2,,.LSQUE] ;Set argument type
MOVEM S2,ARG.HD(P2)
HRLZM S1,ARG.DA(P2) ;Store the queue type
INCR .OARGC(P1) ;Bump message argument count
ADDI P2,ARG.SZ ;Point to next free argument
CHKQ10: $CALL P$CFM ;Parse confirmation?
JUMPT CHKQ20 ;Yes..finish up
$CALL P$SWITCH ;Parse a switch?
JUMPF CHKQ20 ;No..proceed
$CALL 0(S1) ;Yes..call the processor
JRST CHKQ10 ;Try confirmation again
;**;[56] Delete 2 lines and insert 1 at CHKQ20+0L. /LWS
CHKQ20: TXNN F,FL.CHK ;[56] Was MOUNT /CHECK typed?
JRST CHKQ30 ;No...onward to show queues
MOVE S2,[2,,.LSUSR] ;Yes..then default is 'our' queues
MOVEM S2,ARG.HD(P2)
MOVE S2,USRNUM ; Only ours
MOVEM S2,ARG.DA(P2)
INCR .OARGC(P1) ;Include argument in count
ADDI P2,ARG.SZ ;Point past it
CHKQ30: SUBI P2,PACKET ;Compute message length
STORE P2,.MSTYP(P1),MS.CNT ;Store the count
MOVE S1,P2 ;Return S1 containing size
MOVEI S2,PACKET ; S2 Containing address
$RETT
;SHOW Command
.SHOW: MOVE S1,['SHOW '] ;Set for /HELP
MOVEM S1,CMDNAM##
$CALL DOSWS##
$CALL P$KEYW ;Get the command
PJRST 0(S1) ;Dispatch to processor
;SHOW ALLOCATION command
.SHALL: $CALL CHKALC ;Build Check allocation message
$RETT
;SHOW QUEUE command
.SHQUE: $CALL P$KEYW ;Get the queue type
SKIPT ;Queue type specified?
MOVE S1,[LIQALL_-^D18] ;No..default to ALL
$CALL CHKQUE ;Build proper message
$CALL SNDQSR ;Request response
$CALL RCVQSR ;Get the ACK
$RETT
;SHOW QUEUE option processor routines
;ACCEPTS P1/ Address of message
; P2/ First free address in message
SQ$ALL: MOVE S2,[2,,.LSUSR] ;Specify all users
MOVEM S2,ARG.HD(P2)
SETZM ARG.DA(P2)
INCR .OARGC(P1) ;Include argument count
ADDI P2,ARG.SZ ;Point past it
$RETT
SQ$BRI: MOVX S1,LS.FST
IORM S1,.OFLAG(P1)
$RETT
SQ$FUL: MOVX S1,LS.ALL
IORM S1,.OFLAG(P1)
$RETT
SQ$USE: $CALL P$USER ;Parse the user
SKIPT ;Was user number parsed?
MOVE S1,USRNUM ;No..default to my PPN
MOVE S2,[2,,.LSUSR] ;Get the argument type
MOVEM S2,ARG.HD(P2) ;Store it
MOVEM S1,ARG.DA(P2) ;Store user number
INCR .OARGC(P1) ;Bump argument count
ADDI P2,ARG.SZ ;Point to next argument
$RETT
;HELP option processor routine
HELPER::MOVEI S1,HELPFD ;POINT TO FD
MOVEM S1,HLPFOB+FOB.FD ;STORE IN FOB FD WORD
MOVX S1,INSVL.(7,77B35) ;7 BIT BYTES
MOVEM S1,HLPFOB+FOB.CW ;STORE IN FOB CONTROL WORD
MOVX S1,INSVL.(FDMSIZ,FD.LEN) ;GET LENGTH
MOVEM S1,HELPFD+.FDLEN ;STORE IT
HRLZI S1,'HLP' ;GET DEVICE
MOVEM S1,HELPFD+.FDSTR ;STORE IT
MOVEM S1,HELPFD+.FDEXT ;STORE AS THE EXTENSION TOO
MOVE S1,CMDNAM## ;GET SIXBIT COMMAND NAME
MOVEM S1,HELPFD+.FDNAM ;STORE AS HELP FILE NAME
MOVEI S1,FOB.MZ ;GET FOB SIZE
MOVEI S2,HLPFOB ;POINT TO FOB
$CALL F%IOPN ;OPEN FILE
JUMPF HELP.E ;CAN'T
PUSH P,S1 ;SAVE IFN
HELP.1: MOVE S1,(P) ;GET IFN
$CALL F%IBYT ;GET A CHARACTER
JUMPF HELP.2 ;CAN'T
MOVE S1,S2 ;MOVE IT
$CALL K%BUFF ;PUT A CHARACTER
JUMPF HELP.2 ;CAN'T
JRST HELP.1 ;LOOP UNTIL DONE
HELP.2: $CALL K%FLSH ;FLUSH THE TTY BUFFERS
POP P,S1 ;GET IFN
$CALL F%REL ;RELEASE IT
JRST GETCM2 ;NEVER RETURN TO CALLER ON /HELP
HELP.E: $TEXT (,<% No help available; ^F/HELPFD/ ^E/[-1]/>)
JRST GETCM2 ;NEVER RETURN TO CALLER ON /HELP
;LOGCHR Default Text output routine
LOGCHR: PJRST T%TTY ;Type the character
;P$WLDF - routine to parse Possibly wild SIXBIT field
;RETURNS TRUE S1/ Sixbit field
; S2/ Wild mask for field
; FALSE if field is not valid wild alphanumeric
;Field may be:
; AAAAAA Mask will be -1
; * mask will be 0
; AA?AAA mask will be 0 for 6 bits at each ? or %
P$WLDF: $CALL P$SIXF ;Get sixbit field
$RETIF ;Return if FALSE
SKIPN S1 ;User type "*" maybe?
MOVSI S1,'* ' ;No - make it look that like he did
SETOM T2 ;Initialize mask
MOVE T3,[POINT 6,S1] ;Initialize name pointer
MOVE T4,[POINT 6,S2] ;Initialize mask pointer
PWLDF1: TLNN T3,(77B5) ;Finished last character?
$RETT ;Yes..return success
ILDB T1,T3 ;Get a source byte
JUMPE T1,PWLDF4 ;Update mask on null
CAIL T1,'0' ;Alphanumeric?
CAILE T1,'Z'
JRST PWLDF2 ;No..check for wild
CAILE T1,'9'
CAIL T1,'A'
JUMPN T2,PWLDF4 ;Do next character
PWLDF2: CAIE T1,'*' ;Full wild card?
JRST PWLDF3 ;No..check single
TDZ T2,T2 ;Yes..clear remaining mask
JRST PWLDF4
PWLDF3: CAIE T1,'?' ;Wild character?
CAIN T1,'%'
TRZA T2,77 ;Yes..Clear bits to indicate wild
$RETF ;Not alphanumeric
PWLDF4: TLNE T4,(77B5) ;Update mask
IDPB T2,T4
LSH T2,-6 ;Position mask
JRST PWLDF1 ;Do next character
;SNDQSR - routine to send an IPCF message to QUASAR
;ACCEPTS S1/ Length of message
; S2/ Address of message
SNDQSR: MOVEM S1,SAB.LN+SNDSAB ;Store the length
MOVEM S2,SAB.MS+SNDSAB ;Store the address
;**;[55] Insert 4 lines after SNDQSR+1L. /LWS
LOAD S1,F,FL.NOT ;[55] Get /NOTIFY bit
STORE S1,USRACK,ACK.NT ;[55] Put in our copy of ACK code
MOVE S1,USRACK ;[55] Get ACK code
MOVEM S1,.MSCOD(S2) ;[55] Put in message header
MOVX S1,SP.QSR ;Get quasars index
TXO S1,SI.FLG ;Set special index flag
MOVEM S1,SAB.SI+SNDSAB ;Send by special index
SETZM SAB.PD+SNDSAB ; Not by pid
MOVEI S1,SAB.SZ ;Point to the message
MOVEI S2,SNDSAB
$CALL C%SEND ;Send it off
JUMPF [$FATAL (Could not send request to QUASAR - ^E/S1/)]
$RET ;Return true/false per C%SEND
;RCVQSR - Recieves a message from QUASAR and processes its text arguments
;**;[55] Rework RCVQSR. /LWS
RCVQSR: $SAVE <P1> ;[55] Save an AC
RCVQS0: $CALL C%BRCV ;[55] Get a message
MOVE P1,S1 ;[55] Save MDB address
LOAD S2,MDB.SI(P1),SI.FLG ;[55] Message from a system pid?
JUMPE S2,RCVWR1 ;[55] Jump if not
LOAD S2,MDB.SI(P1),SI.IDX ;[55] Get the system index
CAIE S2,SP.QSR ;From QUASAR?
JRST RCVWR2 ;[55] No,,go complain
LOAD P1,MDB.MS(P1),MD.ADR ;[55] Get message address
MOVE S1,.MSCOD(P1) ;[55] Get ACK code
$CALL CHKACK ;[55] Go check it out
JUMPF RCVQSM ;[55] Don't want it if FALSE
MOVE S1,P1 ;[55] Get message address in S1
$CALL INIBLK ;Initialize message parser
JUMPF RCVQSF ;Flush the bumb message
LOAD S2,.MSTYP(P1),MS.TYP ;Get message type
CAIE S2,.OMACS ;List answer message?
JRST RCVQS2 ;No..check text
RCVQS1: $CALL GETBLK ;Yes..get first argument
JUMPF RCVQSF ;Bad news..No text found
CAIE S1,.CMTXT ;Is this a text argument?
JRST RCVQS1 ;No..find one to display
$TEXT (,^T/@T2/^A) ;Yes..display the response
MOVE S1,MSGADR ;Retrieve message address
MOVE T1,.OFLAG(S1) ;Get its flags
TXNE T1,WT.MOR ;More to come?
JRST RCVQSM ;Yes..recieve the next message
$CALL C%REL ;Release this message
$RETT ;Finished
RCVQS2: CAIE S2,MT.TXT ;Text message type?
JRST RCVQSF ;No..release the bumb message
RCVQS3: $CALL GETBLK ;Get a block from message
JUMPF RCVQSF ;Bumb message
CAIE S1,.CMTXT ;Is this a text arg?
JRST RCVQS3 ;No..find one
MOVE S1,MSGADR ;Retrieve message address
MOVE S1,.MSFLG(P1) ;[55] Get the flags
TXNE S1,MF.FAT ;Fatal flag set?
JRST RCVFAT ;Fatal message from QUASAR
TXNE S1,MF.WRN ;Warning flag set?
JRST RCVWRN ;Warning message from QUASAR
OUTSTR 0(T2) ;[55] Dump the text
TXZE F,FL.MOR ;[55] Look for more ACKs?
JRST RCVQSM ;[55] Yes,,go do it
$CALL C%REL
$RETT
;Continued on next page
;Continued from previous page
RCVQSF: MOVEI T2,[ASCIZ/Unrecognized QUASAR message/]
RCVFAT: SKIPA S1,["?"]
RCVWRN: MOVEI S1,"%"
$TEXT (,<^7/S1/^T/@T2/>)
$CALL C%REL ;Release the message
$RETF ;Return the failure
RCVWR1: $WARN(Message from unknown pid ignored) ;[55]
TRNA ;[55] Skip
RCVWR2: $WARN(Message from unkown system component ignored) ;[55]
RCVQSM: $CALL C%REL ;Release the message
JRST RCVQS0 ;[55] Back to get another messaage
;[55] CHKACK - routine to ACK from newly arrived message to see if
;[55] we should process the message or pitch it.
;[55] ACCEPTS S1/ ACK code to check
;[55] RETURNS FALSE if message should be pitched
;[55] TRUE if message should be processed
;[55] FL.MOR is set/cleared depending on
;[55] contents of ACK as compare to USRACK
CHKACK: TXZ F,FL.MOR ;[55] Assume an exact match
CAMN S1,USRACK ;[55] Is it?
$RETT ;[55] Yes,,'tis what we want to see
$SAVE <T1> ;[55] No,,we'll have to check further
MOVE T1,S1 ;[55] Copy ACK code
LOAD S1,T1,ACK.JB ;[55] Get job # field from msg ACK
LOAD S2,USRACK,ACK.JB ;[55] Get same from original ACK
CAME S1,S2 ;[55] Match?
$RETF ;[55] No,,can't use it
LOAD S1,T1,ACK.UT ;[55] Yes,,get UDT part of msg ACK
LOAD S2,USRACK,ACK.UT ;[55] Get the same from USRACK
CAMLE S1,S2 ;[55] Possibly ACK from previous mount?
$RETF ;[55] No,,could be imposters
TXNN T1,ACK.NT ;[55] Yes. /NOTIFY in previous mount?
$RETF ;[55] No,,don't process this ACK
TXO F,FL.MOR ;[55] Yes,,process this ACK and more...
$RETT ;[55] Return TRUE!
;INIBLK - routine to setup for message parsing routines
;ACCEPTS S1/ message address
INIBLK: MOVEM S1,MSGADR ;Save address of the message
LOAD S2,.MSTYP(S1),MS.CNT ;Get length of message
CAIL S2,.OARGC ;Does it have any arguments?
SKIPN S2,.OARGC(S1)
$RETF ;No..return the failure
MOVEM S2,BLKCNT ;Yes..save the count
MOVEI S2,.OHDRS+ARG.HD(S1) ;Point to the first argument
MOVEM S2,BLKADR ;Save for GETBLK routine
$RETT
;GETBLK - Routine to return next message argument
;ACCEPTS BLKCNT and BLKADR setup by INIBLK
;RETURNS TRUE S1/ Argument type
; T1/ Argument length
; T2/ Argument data address
; FALSE No more arguments
GETBLK: SOSGE BLKCNT ;Any more arguments?
$RETF ;No..return false
MOVE T2,BLKADR ;Yes..get address
LOAD S1,ARG.HD(T2),AR.TYP ;Get block type
LOAD T1,ARG.HD(T2),AR.LEN ;Get argument length
ADDM T1,BLKADR ;Point to next argument
MOVEI T2,ARG.DA(T2) ;Point at first data location
$RETT
SUBTTL Initialization routines
;JOBPRM - Routine to read initial job parameters
JOBPRM: SETO S1, ;Get information for my job
MOVEI S2,JI.JNO ;Read my job number
$CALL I%JINF
MOVEM S2,JOBNUM
;**;[55] Add code in JOBPRM for user ACK code. /LWS
STORE S2,USRACK,ACK.JB ;[55] Store in ACK also
MOVEI S2,JI.USR ;Read my user number (or PPN)
$CALL I%JINF
MOVEM S2,USRNUM
$CALL I%NOW ;[55] Get UDT
STORE S1,USRACK,ACK.UT ;[55] Store part we want in ACK code
$RETT
; Macro to define a break character set
;
DEFINE $BCS (CHR),<
.XCREF
...BRK==0
IRP CHR,<...BRK==...BRK!1B35_CHR>
EXP ...BRK
.CREF
>
;**;[57] Redo code in TTYRSC to handle line continuation. /LWS
; Rescan the command line that invoked us
;
TTYRSC: MOVE T1,[TTYBUF,,TTYBUF+1] ;SET UP BLT
SETZM TTYBUF ;CLEAR THE FIRST WORD
BLT T1,TTYBUF+TTYSIZ-1 ;CLEAR THE BUFFER
MOVE T2,[POINT 7,TTYBUF] ;SET UP BYTE POINTER
MOVEI T3,<TTYSIZ*5>-1 ;[57] SET BYTE COUNT W/ROOM FOR <LF>
RESCAN ;POINT TO THE START OF THE COMMAND
TTYR.1: INCHWL T1 ;GET A CHARACTER
CAIN T1,.CHCRT ;<CR>?
JRST TTYR.1 ;YES - INGORE IT
CAIN T1,"-" ;[57] NO, POSSIBLE LINE CONTINUATION?
JRST TTYR.2 ;[57] YES, GO PROCESS NEXT CHAR
PUSHJ P,BRKCHR ;[57] NO, CHECK FOR BREAK CHAR
JUMPT TTYR.4 ;[57] IF SO, GO TERMINATE COMMAND
PUSHJ P,PUTCHR ;[57] ELSE PUT CHAR IN BUFFER
JRST TTYR.1 ;[57] GET NEXT CHAR
;Here on possible line continuation.
TTYR.2: INCHWL T1 ;[57] GET NEXT CHAR
CAIE T1," " ;[57] EAT SPACES,
CAIN T1,.CHTAB ;[57] TABS, AND
JRST TTYR.2 ;[57] CARRIAGE RETURNS.
CAIN T1,.CHCRT ;[57]
JRST TTYR.2 ;[57]
PUSHJ P,BRKCHR ;[57] REAL LINE CONTINUATION?
JUMPF TTYR.3 ;[57] IF NOT, GO PUT DASH IN BUFFER
OUTCHR ["#"] ;[57] IT IS, OUTPUT CONTINUATION PROMPT
JRST TTYR.1 ;[57] GO GET MORE INPUT
;Here to put dash in buffer that wasn't start of line continuation
TTYR.3: MOVE T4,T1 ;[57] SAVE NON-BREAK CHAR
MOVEI T1,"-" ;[57] GET DASH
PUSHJ P,PUTCHR ;[57] PUT IT IN BUFFER
MOVE T1,T4 ;[57] GET NON-BREAK CHAR BACK
PUSHJ P,PUTCHR ;[57] PUT IT IN BUFFER, TOO
JRST TTYR.1 ;[57] LOOP FOR MORE CHARS
;Terminate command buffer with <LF> for parser.
TTYR.4: MOVEI T1,.CHLFD ;[57] GET A LINE FEED
IDPB T1,T2 ;TERMINATE COMMAND
POPJ P, ;RETURN
;Put char in T1 into command buffer.
PUTCHR: IDPB T1,T2 ;[57] STORE CHAR
SOSL T3 ;[57] LAST CHAR ALREADY STORED?
POPJ P, ;[57] NO, RETURN
OUTSTR [ASCIZ\
?MOUNT command too long.\] ;[57] TELL POOR GUY
CLRBFI ;[57] FLUSH REST OF INPUT (TYPEAHEAD TOO)
MONRT. ;[57] EXIT
JRST .-1 ;[57] PREVENT CONTINUES
;[57] Routine to check if char in T1 is a break character
BRKCHR: MOVEI T4,1 ;[57] GET A BIT
LSH T4,(T1) ;[57] POSITION IT
CAIE T1,.CHDEL ;[57] <RUBOUT>?
TDNN T4,[$BCS <3,7,12,13,14,22,24,25,27,32,33>] ;[57] A BREAK CHARACTER?
TDZA TF,TF ;[57] NO
SETOM TF ;[57] YES
POPJ P, ;[57] RETURN
SUBTTL Interrupt routines
;Interrupt service routines
INTIPC: $BGINT 1
$CALL C%INTR ;Flag message recieved
$DEBRK
INTCNC: PJRST I%EXIT ;Thats all folks
TOPS20 <
LEVTAB: LEV1PC
LEV2PC
LEV3PC
>
SUBTTL Initialization blocks
;;; .PSECT DATA
IBBLK: $BUILD (IB.SZ) ;Build initialization block
$SET (IB.PRG,,'MOUNT ') ;Program name
$SET (IB.OUT,,LOGCHR) ;Default text output routine
$SET (IB.FLG,IB.NPF,1) ;DON'T USE PFH
$SET (IB.FLG,IB.DPM,1) ;Use job number for a PID
$SET (IB.PIB,,PIB) ;Obtain a pid to use
TOPS10 < $SET (IB.INT,,IPCINT)> ;Point to proper interrupt base
TOPS20 < $SET (IB.INT,,<LEVTAB,,CHNTAB>)>
$EOB
PIBBLK: $BUILD (PB.MNS) ;Pid initialization block
$SET (PB.HDR,PB.LEN,PB.MNS) ;Set block length
$SET (PB.FLG,IP.PSI,1) ;Assign pid to PSI
TOPS10 < $SET (PB.INT,IP.CHN,0)> ;Declare offset
TOPS20 < $SET (PB.INT,IP.CHN,1)> ;Declare channel 1
$EOB
SUBTTL Impure storage
XLIST ;Turn listing off
LIT ;Dump literals
LIST ;Turn listing on
RELOC 0
DATORG: ;Start of impure storage to be cleared
;Interrupt PC locations
$DATA IB,IB.SZ ;Initialization block
$DATA PIB,PB.MNS ;PID initialiation block
TOPS10 <$DATA IPCINT,4> ;IPCF Interrupts
TOPS20 <$DATA CHNTAB,^D36> ;Interrupt channel table
$DATA LEV1PC,1 ;RETURN PC FOR INTERRUPT LEVEL 1
$DATA LEV2PC,1 ;RETURN PC FOR INTERRUPT LEVEL 2
$DATA LEV3PC,1 ;RETURN PC FOR INTERRUPT LEVEL 3
$DATA JOBNUM,1 ;My Job number
$DATA USRNUM,1 ;My user number
$DATA USRACK,1 ;[55] ACK for messages
$DATA HLPFOB,FOB.MZ ;Help file FOB
$DATA HELPFD,FDMSIZ ;Help file FD
$DATA ACKCNT,1 ;Number of ACKS expected
$DATA DEFSWS,1 ;Default switches for parse
$DATA PDL,PDLEN ;Push down list
$DATA TTYBUF,TTYSIZ ;TTY buffer
$DATA PARBLK,PAR.SZ ;Parser argument block
$DATA CMDBLK,CMD.SZ ;Returned command arguments
$DATA SNDSAB,SAB.SZ ;SAB for IPCF
$DATA MSGADR,1 ;Address of recieved message
$DATA BLKADR,1 ;Address of current message block
$DATA BLKCNT,1 ;Count of remaining message blocks
$DATA PACKET,PAKSIZ ;Storage for message
$DATA OPRNOT,3 ;QUEUE. UUO BLOCK FOR /VID ** DON'T SEPARATE **
$DATA VIDBLK,1 ;" " "
$DATA VIDADR,1 ;" " "
$DATA VIDPTR,1 ;" " "
$DATA VIDCHR,.DCUPN+1 ;DSKCHR arg block
;;; .ENDPS DATA
DATEND: ;End of impure storage
END <3,,ENTVEC>