Trailing-Edge
-
PDP-10 Archives
-
cuspbinsrc_1of2_bb-x128c-sb
-
10,7/dil/dilsrc/m11fil.b36
There are 21 other files named m11fil.b36 in the archive. Click here to see a list.
MODULE M11FIL ( ! MACY11 file service for RMS
IDENT = '3',
ENTRY(
RL$GMACY11, ! Get a record from macy11 file
RL$PMACY11, ! Put a record to macy11 file
RL$CMACY11, ! Connect RAB to FAB for MACY11
RL$CLMACY11 ! Close MACY11 file
)
) =
BEGIN
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1986.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: DAP
!
! ABSTRACT: Routines to transfer records or blocks of file data.
! Process MACY11 files
!
! ENVIRONMENT:
!
! AUTHOR: Andrew Nourse, CREATION DATE: 3-Mar-82
!
! Edit (%O'1', '12-Apr-84', 'Sandy Clemens')
! %( Add the TOPS-10 DAP sources for DIL V2. Use the standard DIL
! edit history format.
! )%
!
! Edit (%O'5', '5-Oct-84', 'Sandy Clemens')
! %( Add new format of COPYRIGHT notice. FILES: ALL )%
!
! 03 - Start TOPS-10 support [Doug Rayner]
! 02 - Put in ENTRY points
! 01 - The beginning
!--
!
! INCLUDE FILES:
!
LIBRARY 'RMS';
LIBRARY 'RMSBLK'; ! Internal RMS defs
LIBRARY 'BLISSNET';
LIBRARY 'CONDIT';
LIBRARY 'DAP';
%IF %SWITCHES(TOPS20)
%THEN
LIBRARY 'TWENTY';
REQUIRE 'JSYSDEF.R36';
%FI
!
! TABLE OF CONTENTS:
!
FORWARD ROUTINE
RL$GMACY11, ! Get a record from macy11 file
RL$PMACY11, ! Put a record to macy11 file
M11GBY, ! Get a byte from MACY11 file
M11PBY, ! Put a byte to MACY11 file
RL$CMACY11, ! Connect RAB to FAB for MACY11
RL$CLMACY11; ! Close MACY11 file
!
! MACROS:
!
MACRO SAVED_BYTE=RST$H_RECORD_SIZE_WORDS %;
!
! EQUATED SYMBOLS:
!
LITERAL NO_BYTE=%O'777777';
LITERAL END_OF_PAGE_MASK=%O'770000000777';
!
! OWN STORAGE:
!
!
! EXTERNAL REFERENCES:
!
EXTERNAL ROUTINE
RMS$READ,
RMS$WBUCKET;
GLOBAL ROUTINE RL$GMACY11 (RAB,ERR) = ! Get a MACY11 record
!++
! FUNCTIONAL DESCRIPTION:
!
! Get a record from an open MACY11 file.
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! ERR: Address of error routine
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! COMPLETION CODES:
!
! Standard RMS codes
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
MAP RAB: REF $RAB_DECL;
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL;
BIND FST=.FAB[FAB$A_IFI]: $RMS_FST; ! File status table
BIND RST=.FST[FST$A_FLINK]: $RMS_RST; ! Record status table
BIND CBKD=RST[RST$Z_CURRENT_BUCKET]: $RMS_BUCKET_DESCRIPTOR;
BIND ROUTINE $$ERRRTN=.ERR: RMS_ERCAL;
LOCAL BUFPTR;
LOCAL LEFT;
BUFPTR=CH$PTR(.RAB[RAB$A_UBF],0,8); ! Use user's buffer
LEFT=.RST[RST$G_HIGHEST_BYTE] ! counts bytes left in file
-(((.CBKD[BKT$H_BUCKET_NUMBER]+1)*512*4)-.RST[RST$H_BYTE_COUNT]);
SELECT .FAB[FAB$Z_RFM] OF
SET
[FAB$K_RFM_FIX]:
BEGIN
RAB[RAB$H_RSZ]=.FAB[FAB$H_MRS];
IF (.LEFT LSS .RAB[RAB$H_RSZ]) THEN SIGNAL(RMS$_EOF,0,FAB[$]);
! EOF if not enough bytes for one full record.
END;
[FAB$K_RFM_VAR]:
BEGIN
IF .LEFT LSS 4 THEN SIGNAL(RMS$_EOF,0,FAB[$]);
! Don't be fooled by up to 3 filler bytes at end.
IF M11GBY(RAB[$],.ERR) NEQ 1 THEN (RAB[RAB$H_STS]=RMS$_UDF;
$$ERROR(GET,RAB[$]));
M11GBY(RAB[$],.ERR); ! Filler
RAB[RAB$H_RSZ]=M11GBY(RAB[$],.ERR)+(M11GBY(RAB[$],.ERR)^8)-4;
! Record size including header
END;
TES;
DECR I FROM .RAB[RAB$H_RSZ]-1 TO 0
DO CH$WCHAR_A(M11GBY(RAB[$],.ERR),BUFPTR);
IF .FAB[FAB$Z_RFM] EQL FAB$K_RFM_VAR
THEN (DECR I FROM 6 TO 0 DO M11GBY(RAB[$],.ERR)); ! Eat checksum & filler
.RAB[RAB$H_STS] ! Return status
END; !End of RL$GMACY11
GLOBAL ROUTINE RL$PMACY11 (RAB,ERR) = ! Put a MACY11 record
!++
! FUNCTIONAL DESCRIPTION:
!
! Put a record to an open MACY11 file.
!
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! ERR: Address of error routine
!
! COMPLETION CODES:
!
! Standard RMS codes
!
! SIDE EFFECTS:
!
! NONE
!--
BEGIN
MAP RAB: REF $RAB_DECL;
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL;
BIND ROUTINE $$ERRRTN=.ERR: RMS_ERCAL;
LOCAL BUFPTR;
LOCAL CKSM;
BUFPTR=CH$PTR(.RAB[RAB$A_RBF],0,8); ! Make byte pointer of it
SELECT .FAB[FAB$Z_RFM] OF
SET
[FAB$K_RFM_FIX]: RAB[RAB$H_RSZ]=.FAB[FAB$H_MRS];
[FAB$K_RFM_VAR]:
BEGIN ! Put out the header
LOCAL RSZ;
RSZ=.RAB[RAB$H_RSZ]+4; ! MACY11 record size includes hdr
M11PBY(RAB[$],1,.ERR); ! sync
M11PBY(RAB[$],0,.ERR); ! sync
M11PBY(RAB[$],(.RSZ AND %O'377'),.ERR); ! Record length
M11PBY(RAB[$],((.RSZ^-8) AND %O'377'),.ERR); !
CKSM=.RSZ+(.RSZ^-8)+1; ! Checksum so far
END;
TES;
DECR I FROM .RAB[RAB$H_RSZ]-1 TO 0
DO BEGIN
LOCAL C;
M11PBY(RAB[$],(C=CH$RCHAR_A(BUFPTR)),.ERR);
CKSM=.CKSM+.C; ! count in checksum
END;
IF .FAB[FAB$Z_RFM] EQL FAB$K_RFM_VAR
THEN
BEGIN
M11PBY(RAB[$],((-.CKSM) AND %O'377'),.ERR); ! Put out negative checksum
DECR I FROM 5 TO 0
DO M11PBY(RAB[$],0,.ERR); ! and 6 bytes of 0
END;
.RAB[RAB$H_STS]
END; !End of RL$PMACY11
ROUTINE M11GBY (RAB,ERR) = ! Get MACY11 byte
!++
! FUNCTIONAL DESCRIPTION:
!
! Get byte to MACY11 file
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! ERR: Address of error routine
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
MAP RAB: REF $RAB_DECL;
BIND RST=.RAB[RAB$A_ISI]: $RMS_RST;
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL;
BIND ROUTINE $$ERRRTN=.ERR: RMS_ERCAL;
IF .RST[SAVED_BYTE] EQL NO_BYTE
THEN
BEGIN
BIND PAGPTR=RST[RST$G_PAGE_POINTER]; ! Byte pointer in bucket
BIND CBKD=RST[RST$Z_CURRENT_BUCKET]: $RMS_BUCKET_DESCRIPTOR;
IF .RST[RST$H_BYTE_COUNT] LEQ 0 ! bucket used up?
THEN
BEGIN
LOCAL RSZ;
RSZ=.RAB[RAB$H_RSZ]; ! Save recordsize
RAB[RAB$G_BKT]=.RAB[RAB$G_RFA]+1; ! Next page
RMS$READ(RAB[$],.ERR);
PAGPTR=%O'442200000000'+.CBKD[BKT$A_BUCKET_ADDRESS]; ! Point to it
RST[RST$H_BYTE_COUNT]=512*4; ! This many will fit on a page
RAB[RAB$H_RSZ]=.RSZ; ! Restore recordsize
END;
RST[SAVED_BYTE]=CH$RCHAR_A(PAGPTR);
RST[RST$H_BYTE_COUNT]=.RST[RST$H_BYTE_COUNT]-1;
RETURN (.RST[SAVED_BYTE] AND %O'377')
END
ELSE
BEGIN
LOCAL V;
RST[RST$H_BYTE_COUNT]=.RST[RST$H_BYTE_COUNT]-1;
V=(.RST[SAVED_BYTE] ^ -8) AND %O'377'; ! Other half
RST[SAVED_BYTE]=NO_BYTE;
RETURN .V
END
END; !End of M11GBY
ROUTINE M11PBY (RAB,CHAR,ERR) = ! Put MACY11 byte
!++
! FUNCTIONAL DESCRIPTION:
!
! Put byte to MACY11 file
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! CHAR: byte to put
! ERR: Address of error routine
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! Standard RMS codes
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
MAP RAB: REF $RAB_DECL;
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL;
BIND ROUTINE $$ERRRTN=.ERR: RMS_ERCAL;
BIND RST=.RAB[RAB$A_ISI]: $RMS_RST;
BIND PAGPTR=RST[RST$G_PAGE_POINTER]; ! Byte pointer in bucket
BIND CBKD=RST[RST$Z_CURRENT_BUCKET]: $RMS_BUCKET_DESCRIPTOR;
IF .RST[RST$H_BYTE_COUNT] LEQ 0 ! bucket used up?
THEN
BEGIN ! we need a new one
LOCAL RSZ;
RSZ=.RAB[RAB$H_RSZ];
RMS$WBUCKET(RAB[$],.ERR); ! Put out this page
RAB[RAB$G_BKT]=.RAB[RAB$G_RFA]+1; ! Next page
RMS$READ(RAB[$],.ERR);
PAGPTR=%O'442200000000'+.CBKD[BKT$A_BUCKET_ADDRESS]; ! Point to bucket
RST[RST$H_BYTE_COUNT]=512*4; ! This many will fit on a page
RAB[RAB$H_RSZ]=.RSZ; ! Restore recordsize
END;
IF .RST[SAVED_BYTE] NEQ NO_BYTE
THEN
BEGIN
CH$WCHAR_A(.RST[SAVED_BYTE]+(.CHAR^8),PAGPTR);
RST[SAVED_BYTE]=NO_BYTE;
END
ELSE
BEGIN
RST[SAVED_BYTE]=.CHAR;
CH$WCHAR(.CHAR, .PAGPTR) ! In case EOF comes immediately
END;
RST[RST$H_BYTE_COUNT]=.RST[RST$H_BYTE_COUNT]-1;
.RAB[RAB$H_STS] ! Return status
END; !End of M11PBY
GLOBAL ROUTINE RL$CMACY11(RAB: REF $RAB_DECL, ERR)=
!++
! FUNCTIONAL DESCRIPTION
!
! Special CONNECT-time setup for MACY11 files
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! CHAR: byte to put
! ERR: Address of error routine
!--
BEGIN
$CONNECT(RAB=RAB[$],ERR=.ERR); ! Do regular connect
%IF %SWITCHES(TOPS20)
%THEN
IF .RAB[RAB$H_STS] EQL RMS$_SUC
THEN
BEGIN
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL;
BIND RST=.RAB[RAB$A_ISI]: $RMS_RST;
BIND CBKD=RST[RST$Z_CURRENT_BUCKET]: $RMS_BUCKET_DESCRIPTOR;
BIND PAGPTR=RST[RST$G_PAGE_POINTER]; ! Byte pointer in bucket
LOCAL RSZ;
LOCAL FDBBUF: VECTOR[$FBLEN];
! Make 18 bit bytesize
RST[RST$H_BYTE_COUNT]=0; ! No bytes available now
RST[SAVED_BYTE]=NO_BYTE; ! No saved byte yet
! Set up byte count, and adjust if 36-bit bytes
JSYS_GTFDB(.FAB[FAB$H_JFN],$FBLEN^18,FDBBUF);
RST[RST$G_HIGHEST_BYTE]=.FDBBUF[$FBSIZ];
IF (.POINTR((FDBBUF[$FBBYV]),FB_BSZ)) EQL 36
THEN RST[RST$G_HIGHEST_BYTE]=.RST[RST$G_HIGHEST_BYTE]*4;
RSZ=.RAB[RAB$H_RSZ]; ! Save recordsize
RAB[RAB$G_BKT]=1; ! First page
RMS$READ(RAB[$],.ERR);
PAGPTR=%O'442200000000'+.CBKD[BKT$A_BUCKET_ADDRESS]; ! Point to it
RST[RST$H_BYTE_COUNT]=512*4; ! This many bytes will fit on a page
RAB[RAB$H_RSZ]=.RSZ; ! Restore recordsize
END; !
%FI
.RAB[RAB$H_STS] ! Returned value
END;
GLOBAL ROUTINE RL$CLMACY11(FAB: REF $FAB_DECL, ERR)=
!++
! FUNCTIONAL DESCRIPTION
!
! Special $CLOSE for MACY11 files
!
! FORMAL PARAMETERS:
!
! FAB: A FAB as defined by RMS
! ERR: Address of error routine
!--
BEGIN
BIND FST=.FAB[FAB$A_IFI]: $RMS_FST; ! File status table
BIND RST=.FST[FST$A_FLINK]: $RMS_RST; ! Record status table
BIND CBKD=RST[RST$Z_CURRENT_BUCKET]: $RMS_BUCKET_DESCRIPTOR;
LOCAL SIZE;
%IF %SWITCHES(TOPS20)
%THEN
IF .FAB[FAB$V_FAC_PUT] ! If writing this file
THEN ! then fix up byte count
BEGIN ! and byte size
SIZE=(.CBKD[BKT$H_BUCKET_NUMBER]+1)*512*4 ! Buckets times bytes per bucket
-.RST[RST$H_BYTE_COUNT]; ! Less unused bytes at end
SIZE=(.SIZE+3)/4; ! convert to words to satisfy NFT.
RMS$WBUCKET(RST[$],.ERR); ! Write out current bucket
JSYS_CHFDB(CF_NUD OR ($FBSIZ^18) OR .FAB[FAB$H_JFN],-1,.SIZE);
JSYS_CHFDB(CF_NUD OR ($FBBYV^18) OR .FAB[FAB$H_JFN],FB_BSZ,FLD(36,FB_BSZ));
! Fix the FDB up
RST[RST$H_BYTE_COUNT]=0; ! Keep RMS from changing EOF
END;
%FI
$CLOSE(FAB=FAB[$], ERR=.ERR); ! Do normal close
.FAB[FAB$H_STS] ! Return status
END;
! Keep old names around
GLOBAL BIND RMS$GMACY11=RL$GMACY11;
GLOBAL BIND RMS$PMACY11=RL$PMACY11;
GLOBAL BIND RMS$CMACY11=RL$CMACY11;
END !End of module
ELUDOM