Trailing-Edge
-
PDP-10 Archives
-
bb-y390n-bm_tops20_v41_atpch_19
-
autopatch/lnkhsh.x19
There are 2 other files named lnkhsh.x19 in the archive. Click here to see a list.
TITLE LNKHSH - SYMBOL TABLE HASH SEARCH
SUBTTL D.M.NIXON/DMN/JLd/JNG/DZN/PAH/PY/HD/RJF 5-Feb-88
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1973,1986,1988.
; ALL RIGHTS RESERVED.
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
;TRANSFERRED.
;
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
;AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
;SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
SEARCH LNKPAR,LNKLOW,MACTEN,UUOSYM,SCNMAC
SALL
ENTRY TRYSYM
CUSTVR==0 ;CUSTOMER VERSION
DECVER==6 ;DEC VERSION
DECMVR==0 ;DEC MINOR VERSION
DECEVR==2417 ;DEC EDIT VERSION
SEGMENT
SUBTTL REVISION HISTORY
;START OF VERSION 2
;135 ADD OVERLAY FACILITY
;162 CHECK FOR CALLING TRYSYM WITH 0 NAME
;START OF VERSION 2B
;271 Suppress searching Bound Globals when rehashing
;272 Continue to issue "RGS" message only if user could
; have done something about it -- changed /HASHSIZE.
;404 Insert edit 340, which vanished.
;START OF VERSION 2C
;476 Insert missing FTOVERLAY conditionals.
;477 Count bound globals when computing HSPACE after rehashing.
;530 Get triplet flags definitions right
;557 Clean up the listing for release.
;START OF VERSION 3A
;560 Release on both TOPS-10 and TOPS-20 as LINK version 3A(560)
;START OF VERSION 4
;731 SEARCH MACTEN,UUOSYM
;765 Release on both TOPS-10 and TOPS-20 as LINK version 4(765)
;START OF VERSION 4A
;1174 Label and clean up all error messages.
;1217 Clean up the listings for release.
;1220 Release on both TOPS-10 and TOPS-20 as version 4A(1220).
;Start of Version 5.1
;2026 Update copyright notice.
;Start of Version 6
;2216 Handle long symbols in TRYSYM.
;2267 Fix problem with short symbol passed as long symbol.
;2275 Don't allow long symbol hash to produce zero value.
;2403 New corporate Copywrite statement.
;2417 Update Copywrite statement to 1988.
SUBTTL SYMBOL TABLE HASH SEARCH
;ONE AUXILIARY TABLE IS USED (HASHTB)
; LH - 18 BIT HASH TOTAL FOR SYMBOL
; RH - LOCATION OF THE WORD IN NAMTAB, RELATIVE TO
; THE START OF NAMTAB
; NAMTAB - THE NAMES, IN SIXBIT (USUALLY GS.LB)
;AN ATTEMPT IS MADE TO FIND AN ENTRY MATCHING NAMWRD IN THE FOLLOWING MANNER:
; 1) HASH-TOTAL NAMWRD BY XORING ALL THE WORDS TOGETHER, THEN XORING THE
; HALVES OF THE RESULT.
; 2) DIVIDE THE HASH-TOTAL BY THE SIZE OF HASHTB (HT.PRM)
; THE QUOTIENT BECOMES Q, THE REMAINDER R(0).
; 3) IF LH HASHTB (R) IS UNEQUAL TO THE HASH-TOTAL, GO TO STEP 5.
; 4) IF THE NAMTAB ENTRY, WHOSE RELATIVE ADDRESS IS IN THE RH OF
; HASHTB (R), IS EQUAL TO NAMWRD, THE MATCH IS MADE
; AND THE ROUTINE EXITS; ELSE GO TO STEP 6.
; 5) IF HASHTB (R) IS ZERO, THERE IS NO MATCHING ENTRY.
; 6) COMPUTE A NEW R BY ADDING Q TO R. NOTE THAT
; R(I) = R(0) + Q*I
; 7) STEPS 3 THRU 6 ARE EXECUTED "HT.PRM" TIMES, THEN NO MORE
; ATTEMPTS ARE MADE.
;HERE TO SEARCH GLOBAL SYMBOL TABLE FOR AN ENTRY
;ENTET VIA PUSHJ P,TRYSYM
;W1 = FLAGS (TESTED FOR LONG SYMBOL BY PT.EXT)
;W2 = FIRST 6 CHARACTERS OF SYMBOL NAME
;W3 = VALUE (IF NOT EXTENDED) NOT USED
;W3 = POINTER (IF EXTENDED) TO EXTENDED SYMBOL BLOCK IN GS
;RETURNS ARE
;+1 SYMBOL NOT IN TABLE
;+2 SYMBOL IN TABLE BUT UNDEFINED
;+3 SYMBOL IN TABLE AND DEFINED
;RETURNS WITH FOLLOWING SETUP
;P1= QUOTIENT IN SEARCH
;P2= REMAINDER IN SEARCH
;P3= HASH TOTAL
;P4= NM12SZ PRIME NUMBER WITH WHICH TO HASH
;ALSO USES T1 _ T4
TRYSYM: SKIPGE HSPACE ;ENOUGH SPACE IN TABLE TO MAKE IT WORTHWHILE?
JRST REHASH ;NO, EXPAND TABLE FIRST
JUMPE W2,E$$ISN ;[1174] 0 IS ILLEGAL SYMBOL
TRYS1H: PUSHJ P,HASH ;INITIALIZE FOR SEARCH
JRST TRYS1B
TRYS1A: ADD P2,P1 ;R_R+Q
CAML P2,HT.PRM ;STILL INSIDE TABLE
SUB P2,HT.PRM ;NO INSURE THAT IT IS
TRYS1B: MOVS T1,@HT.PTR ;GET HASH TOTAL (AND PTR)
CAIN P3,(T1) ;IS THIS THE ONE WE WANT?
JRST COMPAR ;MAYBE, CHECK THE SYMBOL NAME
JUMPE T1,NOFIND ;EXIT IF NULL ENTRY IN HASHTB
NOMACH: SOJG P4,TRYS1A ;YES, LOOP
;TRIED ALL THE TABLE - YOU LOSE
NOFIND:
IFN FTOVERLAY,<
SKIPGE BG.SCH ;ANY BOUND GLOBALS WE CAN LOOK AT?
JRST TRY.BG## ;YES, TRY THEM
>
POPJ P, ;NON-SKIP RETURN
MATCH: HRL P2,P1 ;SAVE Q IN R
MOVE P1,T1 ;GET ADDRESS OF SYMBOL
MOVE T1,(P1) ;GET PRIMARY FLAGS
TXNN T1,PS.REQ!PS.UDF ;SEE IF DEFINED YET
CPOPJ2: AOS (P) ;YES
CPOPJ1: AOS (P) ;SKIP RETURN
CPOPJ: POPJ P,
COMPAR: SKIPGE HSPACE ;IF NO SPACE IN TABLE
JRST NOMACH ;WE ARE REHASHING ONLY
HLRZ T1,T1 ;Get address of symbol block
ADD T1,NAMLOC ;Located in core
MOVE T2,1(T1) ;[2216] Get the name or length and pointer
TLNN W2,770000 ;[2216] Long symbol?
JRST LTRY ;[2216] Yes, use long compare
CAME W2,T2 ;[2216] Compare name
JRST NOMACH ;Not the same
JRST MATCH
;[2216] Here for a long symbol. Compare the entire name
;[2216] It is possible for short symbol compared against long.
;[2216] This could be OK if the long symbol is padded with zero words.
LTRY: SPUSH <T1,P1,P2> ;[2216] Save some acs
TLNE T2,770000 ;[2216] Is it long?
JRST [MOVEI T2,1(T1) ;[2216] No, point at the symbol
MOVEI T1,1 ;[2216] It's only one word long
JRST LTRY1] ;[2216] Look at the second word
HLRZ T1,T2 ;[2216] Get the count
ADD T2,GS.LB ;[2216] Absolute address of long symbol name
LTRY1: HRLI T2,(POINT 36,) ;[2216] Byte pointer
MOVEI P1,(W2) ;[2216] Get the address
HRLI P1,(POINT 36,) ;[2216] Make a byte pointer
HLRZ T4,W2 ;[2216] Get the count
LTRY2: EXTEND T1,[CMPSN ;[2216] Compare strings
0
0]
JRST LMATCH ;[2216] A match
SPOP <P2,P1,T1> ;[2216] No match, restore acs
JRST NOMACH ;[2216] Try again
LMATCH: SPOP <P2,P1,T1> ;[2216] Restore acs
JRST MATCH ;[2216] See if defined
;INITIALIZE FOR SEARCH
HASH: MOVE P3,W2 ;[2216] Get short symbol or long symbol pointer
TLNE W2,770000 ;[2216] Long symbol?
JRST SHASH ;[2216] No
;[2216] Here for long symbol - Check for a short symbol in disguise
HLRZ T1,W2 ;[2216] Count of words in symbol
CAIN T1,1 ;[2216] Only one word long?
JRST [MOVE W2,(W2) ;[2216] Yes, it's a short symbol
MOVE P3,W2 ;[2267] Use it for hash
JRST SHASH] ;[2216] Treat it as such
;[2216] Here if it is a real long symbol - XOR the words
SETZ P3, ;[2216] Clear the hash value
MOVNS T1 ;[2216] Make it negative for half of AOBJN
HRLZS T1 ;[2216] Put in left half, account for first word
HRR T1,W2 ;[2216] Address of symbol
LHASH1: XOR P3,(T1) ;[2216] XOR all the symbol words
AOBJN T1,LHASH1
JUMPN P3,SHASH ;[2275] Is it zero?
MOVE P3,(W2) ;[2275] Yes, just use first six characters
SHASH: HLRZ P1,P3
HRRZ P3,P3
CAME P1,P3 ;WE DON'T WANT 0
XORB P1,P3
MOVE P4,HT.PRM ;ONLY 18 BITS AT MOST
IDIVI P1,(P4) ;REMAINDER IN P1
JUMPE P1,[AOJA P1,CPOPJ] ;ENSURE P1 NEVER ZERO
CAIGE P1,(P4) ;IS QUOTIENT LARGER THAN PRIME?
POPJ P, ;NO, RETURN
SUBI P1,(P4) ;STEP DOWN AND TRY AGAIN
JRST .-4 ;ONLY HAPPENS OF PRIME L.T. ^D500
;HERE TO RE-HASH THE GLOBAL TABLE
REHASH:
IFN FTOVERLAY,<
PUSH P,BG.SCH ;REMEMBER IF BG EXITS
SETZM BG.SCH ;SUPPRESS SEARCHING IT
> ;END IFN FTOVERLAY
PUSH P,W1 ;SAVE CURRENT SYMBOL INFO
PUSH P,W2
PUSH P,W3
PUSH P,R3 ;AND A WORK ACC
MOVN R3,HT.PRM ;GET NUMBER
HRLZ R3,R3 ;FIRST PART (LHS) OF AOBJN POINTER
PUSH P,HT.PRM ;SAVE OLD SIZE
MOVE T1,HT.PRM ;GET PREV
LSH T1,-1 ;GET 50% OF IT
SUBI T1,^D50 ;ALLOW SOME LEEWAY
ADDM T1,HT.PRM ;SO WE GET NEXT PRIME 50% LARGER
PUSHJ P,NPRIME## ;GET NEXT PRIME NUMBER FOR HASH SIZE
MOVE T1,GSYM ;SEE IF INITIAL /HASHSIZE:
SUB T1,@GS.LB ;YES IF SAME NUMBER
JUMPE T1,REHSH0 ;SO DON'T TELL USER
MOVE T1,0(P) ;PUT OLD SIZE HERE FOR MESSAGE
E$$RGS::.ERR. (MS,.EC,V%L,L%I,S%I,RGS,<Rehashing global symbol table from >) ;[1174]
.ETC. (DEC,.EC!.EP,,,,T1)
.ETC. (STR,.EC,,,,,< to >)
.ETC. (DEC,.EP,,,,HT.PRM)
REHSH0: MOVE T2,HT.PRM ;GET NEW NUMBER
ADDI T2,.L-1
IDIVI T2,.L
IMULI T2,.L
PUSHJ P,GS.GET## ;GET SPACE
HRR R3,HT.PTR ;COMPLETE AOBJN POINTER TO OLD ARRAY
PUSH P,HT.PTR ;SAVE OLD POSITION SO WE CAN GIVE IT BACK
HRRM T1,HT.PTR ;NEW TABLE OF HASH TOTALS & POINTERS
REHSH1: SKIPN T1,(R3) ;GET POINTER
JRST REHSH3 ;NOTHING THERE
PUSH P,T1 ;SAVE IT
ADD T1,NAMLOC ;RELOCATE
TMOVE W1,0(T1) ;GET FLAGS, SYMBOL, VALUE
PUSHJ P,TRYS1H ;[2216] HASH WITH NEW SIZE AND INSERT IN TABLE
POP P,T1 ;OLD POINTER
HRL T1,P3 ;NEW HASH TOTAL
MOVEM T1,@HT.PTR ;STORE IN TABLE
REHSH3: AOBJN R3,REHSH1 ;GET NEXT
POP P,T1 ;GET LOCATION OF OLD TABLE
HRRZ T1,T1 ;REMOVE INDEX IN LHS
POP P,T2 ;AND SIZE
ADDI T2,.L-1 ;BUT PUT BACK AS MULTIPLE OF .L
IDIVI T2,.L
IMULI T2,.L
PUSHJ P,GS.RET## ;GIVE IT BACK
POP P,R3 ;RESTORE ACCS
POP P,W3 ;RESTORE OLD SYMBOL
POP P,W2
POP P,W1
IFN FTOVERLAY,<
POP P,BG.SCH ;REENABLE BOUND GLOBAL SEARCH
> ;END IFN FTOVERLAY
MOVE T1,HT.PRM ;GET NEW SIZE
IMUL T1,HSFACT ;SEE HOW FULL IS FULL
IDIVI T1,^D100
SUB T1,GSYM ;MINUS WHATS THERE ALREADY
IFN FTOVERLAY,<
SUB T1,BSYM ;COUNT BOUND GLOBALS IN THIS TABLE
> ;END IFN FTOVERLAY
MOVEM T1,HSPACE ;RESET SPACE
JRST TRYSYM ;AND TRY AGAIN
E$$ISN::.ERR. (MS,.EC,V%L,L%F,S%F,ISN,<Illegal symbol name >) ;[1174]
.ETC. (SBX,.EC!.EP,,,,W2) ;[1174]
.ETC. (JMP,,,,,.ETIMF##) ;[1174]
SUBTTL THE END
END