Trailing-Edge
-
PDP-10 Archives
-
bb-r775e-bm_tops20_ks_upd_5
-
sources/dil/dap.bli
There are 21 other files named dap.bli in the archive. Click here to see a list.
MODULE DAP( !DAP message processing routines
IDENT='60(13) 9-Feb-84'
%BLISS36(,
ENTRY(
D$GCFG, ! DAP$GET_CONFIG, ! Get Config message
D$GATT, ! DAP$GET_ATTRIBUTES, ! Get Attributes -> FAB
D$PCFG, ! DAP$PUT_CONFIG, ! Build CONFIG
D$PATT, ! DAP$PUT_ATTRIBUTES, ! Build ATTRIBUTES <- FAB
D$PACC, ! DAP$PUT_ACCESS, ! Build ACCESS message
D$PNAM, ! DAP$PUT_NAME, ! Build a NAME message
D$PCTL, ! DAP$PUT_CONTROL, ! Build CONTROL message
D$GSTS ! DAP$GET_STATUS ! Process a STATUS message
))
)=
BEGIN
!
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1981, 1986.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!++
! FACILITY: FTS-20
!
! ABSTRACT: This is the System-independent part of the DAP protocol.
!
!
! ENVIRONMENT: TOPS-20, Transportable BLISS DecNet Interface
!
! AUTHOR: Andrew Nourse, CREATION DATE: 21-Dec-81
!
! 13 - Make losing old FAL-20 blocks into pages
! 12 - Handle ADT. also put BDT and PDT in correct order
! 11 - Put nodeid in resultant name generated from 3-part name
! 10 - Send real byte size to 36-bit machines, no byte size to others
! and include node name in remote resultant filespec.
! 07 - Set implied CRLF for ASCII FIXED
! 06 - Workaround RSTS not sending STATUS for file-not-found on directory
! 05 - Put in ENTRY points
! 04 - Fix default for BLS in DAP$PUT_ATTRIBUTES
! and put in bitvectors for workarounds
! - Fix RENAME name type
! 03 - Page mode
! 02 - Make the FOP go out
! 01 - The beginning
!--
!
! Conditionals
!
COMPILETIME
FTPASSIVE=0; ! FAL can't use this package yet
!
! Libraries
!
LIBRARY 'DAP';
LIBRARY 'BLISSNET';
LIBRARY 'RMS';
LIBRARY 'CONDIT';
!
! Table of Contents
!
FORWARD ROUTINE
DAP$GET_CONFIG, ! Get Config message
DAP$GET_ATTRIBUTES, ! Get Attributes
DAP$PUT_CONFIG: NOVALUE, ! Build CONFIG
DAP$PUT_ATTRIBUTES: NOVALUE, ! Build ATTRIBUTES from FAB
DAP$PUT_ACCESS: NOVALUE, ! Build ACCESS message
DAP$PUT_NAME: NOVALUE, ! Build a NAME message
DAP$PUT_CONTROL: NOVALUE, ! Build CONTROL message
DAP$GET_STATUS; ! Process a STATUS message
!
! Literals
!
%IF %BLISS(BLISS36)
%THEN
%IF %SWITCHES(TOPS20)
%THEN
LITERAL
OUR_OSTYPE=DAP$K_TOPS20,
OUR_BLOCK_SIZE=512,
DEVICE_NAME_LENGTH=40, ! Including punctuation
DIRECTORY_NAME_LENGTH=41,!
FILE_NAME_LENGTH=40; !
%ELSE
%ERROR('Not implemented on TOPS-10')
%FI
LITERAL
OUR_FILESYS=DAP$K_RMS20;
%ELSE %ERROR('Not implemented for 16/32 bit architectures')
%FI;
!
! External references
!
EXTERNAL ROUTINE CHAZAC,
S$STRDT,
DAP$GET_HEADER,
DAP$UNGET_HEADER,
DAP$GET_BYTE,
DAP$GET_2BYTE,
DAP$GET_DATE,
DAP$GET_VARIABLE_STRING,
DAP$SIZE_BITVECTOR,
DAP$GET_BITVECTOR,
DAP$PUT_BITVECTOR,
DAP$PUT_HEADER,
DAP$PUT_2BYTE,
DAP$PUT_BYTE,
DAP$PUT_STRING,
DAP$PUT_VARIABLE_COUNTED,
DAP$UNGET_BYTE,
DAP$EAT_MESSAGE;
!
! Macros
!
MACRO DAP_ERROR(DDESC,MAC,MIC)=SIGNAL(ERR_DS(MAC,MIC),DDESC) %;
!
! Canned Messages (Global PLITS)
!
GLOBAL BIND CFGMSG=UPLIT(CHAR8(
DAP$K_CONFIG, !Message type CONFIG
0, !Flags
DAP$K_BUFFER_SIZE, ! Buffer
DAP$K_BUFFER_SIZE/256, ! length
OUR_OSTYPE, !Operating system type
OUR_FILESYS, !File system type
6, !DAP version 6
0, !ECO # (DAP 6.0)
0, !Customer version #
1, !Release 1 of software
0, !User software ver #
!SYSCAP fields follow
%O'243',%O'340',%O'361',%O'360',%O'206',%O'55'
!Sequential organization
!Relative organization
!Sequential access
!DAP message blocking
!DAP message blocking over rsp
!Len256 field
!Directory list
!DTM attr. ext. msg
!PROT attr. ext. msg
!FOP spool
!FOP submit
!BITCNT
!RENAME
!Wildcard
!NAME message
)):BYTE8VECTOR;
GLOBAL BIND CFGLEN=17;
GLOBAL D_CFG: $XPN_DESCRIPTOR(BINARY_DATA=(CFGLEN,CFGMSG,BYTES));
! Descriptor for config message
GLOBAL D_SKIP: $XPN_DESCRIPTOR(BINARY_DATA=(3,UPLIT(CHAR8(DAP$K_CONTINUE,
0,
DAP$K_CON_SKP))));
%IF %BLISS(BLISS36)
%THEN
GLOBAL D_CFGTAIL: $XPN_DESCRIPTOR(BINARY_DATA=(CFGLEN-4,CFGMSG+1,BYTES));
! Descriptor for part of config message after buffer size
%ELSE
GLOBAL D_CFGTAIL: $XPN_DESCRIPTOR(BINARY_DATA=(CFGLEN-4,CFGMSG[4],BYTES));
! Descriptor for part of config message after buffer size
%FI
GLOBAL BIND ACKMSG=PLIT(CHAR8(DAP$K_ACK,0));
!Acknowledge
GLOBAL D_ACK: $XPN_DESCRIPTOR(BINARY_DATA=(2,CH$PTR(ACKMSG,0,8)));
! Descriptor for Ack message
%IF FTPASSIVE
%THEN
GLOBAL BIND ACCOMP_RESP=PLIT(CHAR8(DAP$K_ACCESS_COMPLETE,
DAP$K_ACCOMP_RESPONSE));
GLOBAL BIND ACCOMP_RESP_LEN=3;
GLOBAL D_ACM: $XPN_DESCRIPTOR(STRING=(ACRLEN,CH$PTR(ACRMSG,0,8)));
%FI !FTPASSIVE
OWN D_NULL: $STR_DESCRIPTOR(STRING=%CHAR(0));
! Runtime conditionals for workarounds (to other systems' bugs)
GLOBAL
T20BUG: BITVECTOR[16] INITIAL(-1), ! Bit map for TOPS-20 workarounds
VMSBUG: BITVECTOR[16] INITIAL(-1), ! for VMS
RSXBUG: BITVECTOR[16] INITIAL(-1), ! for RSX
RSTBUG: BITVECTOR[16] INITIAL(-1), ! for RSTS
RTBUG: BITVECTOR[16] INITIAL(-1), ! for RT11
IASBUG: BITVECTOR[16] INITIAL(-1), ! for IAS
T10BUG: BITVECTOR[16] INITIAL(-1); ! for TOPS-10
GLOBAL ROUTINE DAP$GET_CONFIG(DD,C)=
!++
! FUNCTIONAL DESCRIPTION:
!
! Process a CONFIG message and save the information contained therein
! into the configuration block
!
! FORMAL PARAMETERS:
!
! DD: A DAP message descriptor
! C: A Configuration Block
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
! Configuration block is set up
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! DAP Message type of message we got.
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
LOCAL MTYPE; !DAP message type
MAP DD: REF $DAP_DESCRIPTOR,
C: REF $CONFIG;
IF (MTYPE=GET_HEADER(DD[$])) NEQ DAP$K_CONFIG
THEN RETURN .MTYPE;
C[CONFIG$H_BUFSIZ]=GET_2BYTE(DD[$]); !Maximum DAP message size
C[CONFIG$B_OSTYPE]=GET_BYTE(DD[$]); !What are we talking to
C[CONFIG$B_FILESYS]=GET_BYTE(DD[$]); !File system type
C[CONFIG$B_VERSION]=GET_BYTE(DD[$]); !DAP Version # of remote system
C[CONFIG$B_ECONUM]=GET_BYTE(DD[$]); !DAP ECO #
C[CONFIG$B_USRNUM]=GET_BYTE(DD[$]); !Customer version # for DAP
C[CONFIG$B_SOFTVER]=GET_BYTE(DD[$]); !Version of cusp
C[CONFIG$B_USRSOFT]=GET_BYTE(DD[$]); !User cusp version #
DAP$GET_BITVECTOR(DD[$],C[CONFIG$V_SYSCAP],12); !SYSCAP bits
!Message was longer than it should be
.MTYPE !Return what we got
END; !End of GETCFG
GLOBAL ROUTINE DAP$GET_ATTRIBUTES(DD,FAB)=
!++
! FUNCTIONAL DESCRIPTION:
!
! Process ATTRIBUTES, ATTRIBUTES extensions, NAME and ACCESS messages
! Returns on receipt of ACK or ACCESS (or NAME if DAP$K_RENAME)
!
! FORMAL PARAMETERS:
!
! DD: A DAP message descriptor
! FAB: A (RMS) FAB
!
! ROUTINE VALUE:
!
! DAP Operator code if successful, Signal error otherwise
!
! SIDE EFFECTS:
!
! Message(s) will have been read.
!
!--
BEGIN !Expecting ATTRIBUTES, ACCESS, NAME, ACK,
!or any of the Attributes extensions
MAP DD: REF $DAP_DESCRIPTOR,
FAB: REF $FAB_DECL;
BIND DIB=.FAB[FAB$A_DIB]: $DIB; ! DAP information block
BIND CONFIG=.DIB[DIB$A_CONFIG]: $CONFIG; ! Configuration block
LOCAL MTYPE: INITIAL(-1); !DAP message type
LOCAL OMTYPE;
LOCAL NAMETYPES_SEEN: BITVECTOR[21] INITIAL(0); ! Types of Name messages seen
WHILE 1 DO
BEGIN
OMTYPE=.MTYPE;
MTYPE=GET_HEADER(DD[$]);
SELECTONE .MTYPE OF SET
[DAP$K_ATTRIBUTES]:
BEGIN
LOCAL ATTMENU: BITVECTOR[42] INITIAL(0),
DATATYPE: BITVECTOR[14] INITIAL(0),
ORG: INITIAL(0),
RFM: INITIAL(0),
RAT: BITVECTOR[21] INITIAL(0),
BLS: INITIAL(0),
MRS: INITIAL(0),
ALQ: INITIAL(0),
BKS: INITIAL(0),
FSZ: INITIAL(0),
MRN: INITIAL(0),
RUNSYS: VECTOR[CH$ALLOCATION(40)]
INITIAL(REP CH$ALLOCATION(40) OF (0)),
DEQ: INITIAL(0),
FOP: BITVECTOR[42] INITIAL(0),
BSZ: INITIAL(0),
DEV: BITVECTOR[42] INITIAL(0),
SDC: BITVECTOR[42] INITIAL(0),
LRL: INITIAL(0),
HBK: INITIAL(0),
EBK: INITIAL(0),
FFB: INITIAL(0),
SBN: INITIAL(0);
DAP$GET_BITVECTOR(DD[$],ATTMENU,6); !Attributes menu bits
IF .ATTMENU[DAP$V_ATTMENU_DAT]
THEN DAP$GET_BITVECTOR(DD[$],DATATYPE,2);
IF .ATTMENU[DAP$V_ATTMENU_ORG] ! File Organization
THEN
BEGIN
ORG=GET_BYTE(DD[$]);
FAB[FAB$Z_ORG]=$DAP_TRANSLATE_VALUE(.ORG,
DAP$K_ORG_,FAB$K_ORG_,
SEQ,REL,IDX,HSH);
END;
IF .ATTMENU[DAP$V_ATTMENU_RFM] ! Record Format
THEN
BEGIN
RFM=GET_BYTE(DD[$]);
FAB[FAB$Z_RFM]=$DAP_TRANSLATE_VALUE(.RFM,
DAP$K_RFM_,FAB$K_RFM_,
UDF,FIX,VAR,
VFC,STM,LSA);
END;
IF .ATTMENU[DAP$V_ATTMENU_RAT] ! Record Attributes
THEN
BEGIN
RAT=GET_BYTE(DD[$]);
$DAP_MOVE_BITS(RAT,DAP$V_RAT_,FAB,FAB$V_RAT_,
FTN,CR,PRN,BLK,LSA);
END;
%BLISS36(
IF .RAT[DAP$V_RAT_LSA] THEN FAB[FAB$Z_RFM]=FAB$K_RFM_LSA;
! Line-Sequenced Ascii
! is a Record Format on the 10 & 20
! and a Record Attribute elsewhere
) !End %BLISS36
IF .ATTMENU[DAP$V_ATTMENU_BLS]
THEN BLS=GET_2BYTE(DD[$]) ! Physical Block Size
ELSE BLS=512; ! default
IF .ATTMENU[DAP$V_ATTMENU_MRS]
THEN FAB[FAB$H_MRS]=GET_2BYTE(DD[$]); ! Maximum Record Size
IF .ATTMENU[DAP$V_ATTMENU_ALQ] ! Allocation Quantity
THEN
BEGIN ! in blocks
ALQ=GET_LONGWORD(DD[$]); ! of (BLS) bytes
! Convert blocks to pages if old TOPS-20 non-RMS FAL
! New FAL has FILESYS of RMS-20 ![13]
IF .FAB[FAB$V_REMOTE]
AND (.CONFIG[CONFIG$B_FILESYS] EQL DAP$K_FILESYS_TOPS20)
THEN ALQ=.ALQ/4;
FAB[FAB$G_ALQ]=.ALQ;
END;
IF .ATTMENU[DAP$V_ATTMENU_BKS] ! Bucket Size
THEN FAB[FAB$Z_BKS]=GET_BYTE(DD[$]);
IF .ATTMENU[DAP$V_ATTMENU_FSZ] ! Fixed Header Size
THEN BEGIN ! (of VFC record)
FSZ=GET_BYTE(DD[$])
END;
IF .ATTMENU[DAP$V_ATTMENU_MRN] ! Maximum Record Number
THEN FAB[FAB$G_MRN]=GET_LONGWORD(DD[$]);
IF .ATTMENU[DAP$V_ATTMENU_RUN] ! Runtime System
THEN DAP$GET_VARIABLE_STRING(DD[$],CH$PTR(RUNSYS),40);
IF .ATTMENU[DAP$V_ATTMENU_DEQ] ! Default Extension Quantity
THEN DEQ=GET_2BYTE(DD[$]);
IF .ATTMENU[DAP$V_ATTMENU_FOP] ! File Options
THEN
BEGIN
DAP$GET_BITVECTOR(DD[$],FOP,6);
$DAP_MOVE_BITS(FOP,DAP$K_FOP_,FAB,FAB$V_FOP_,
RWO,RWC,POS,DLK,LCK,
CTG,SUP,NEF,TMP,MKD,DMO,
WCK,RCK,CIF,LKO,SQO,MXV,SPL,
SCF,DLT,CBT,WAT,DFW,TEF,DRJ);
END;
IF .ATTMENU[DAP$V_ATTMENU_BSZ]
THEN
BEGIN
FAB[FAB$Z_BSZ]=BSZ=GET_BYTE(DD[$]); !Byte size
END;
IF .ATTMENU[DAP$V_ATTMENU_DEV]
THEN
BEGIN
DAP$GET_BITVECTOR(DD[$],DEV,6); !Device characteristics
$DAP_MOVE_BITS(DEV,DAP$V_DEV_,FAB,FAB$V_DEV_,
REC,CCL,TRM,MDI,SDI,SQD,NUL,
FOD,SHR,SPL,MNT,DMT,ALL,IDV,
ODV,SWL,AVL,ELG,MBX,RTM,RAD,
RCK,WCK,FOR,NET,GEN);
END;
IF .ATTMENU[DAP$V_ATTMENU_SDC]
THEN
BEGIN
DAP$GET_BITVECTOR(DD[$],SDC,6);
$DAP_MOVE_BITS(SDC,DAP$V_DEV_,FAB,FAB$V_SHR_,
REC,CCL,TRM,MDI,SDI,SQD,NUL,
FOD,SHR,SPL,MNT,DMT,ALL,IDV,
ODV,SWL,AVL,ELG,MBX,RTM,RAD,
RCK,WCK,FOR,NET,GEN);
END; ! spooling device characteristics
IF .ATTMENU[DAP$V_ATTMENU_LRL]
THEN
BEGIN
LRL=GET_2BYTE(DD[$]);
END;
IF .ATTMENU[DAP$V_ATTMENU_HBK]
THEN
BEGIN
HBK=GET_LONGWORD(DD[$]);
END;
IF .ATTMENU[DAP$V_ATTMENU_EBK]
THEN
BEGIN
EBK=GET_LONGWORD(DD[$]);
END;
IF .ATTMENU[DAP$V_ATTMENU_FFB]
THEN
BEGIN
FFB=GET_2BYTE(DD[$]);
END;
IF .ATTMENU[DAP$V_ATTMENU_SBN]
THEN
BEGIN
SBN=GET_LONGWORD(DD[$]);
END;
END; ! End of Attributes Message
[DAP$K_DATE_TIME]: !Date & time extension message
BEGIN
LOCAL DTMSTR: VECTOR[CH$ALLOCATION(18)];
LOCAL D_DTMSTR: $STR_DESCRIPTOR();
LOCAL DTMMENU: BITVECTOR[14]; !Menu for this message
LOCAL XABDAT: REF $XABDAT_DECL; ! Address of Date/Time XAB
LOCAL RVN; ! Revision number
CLEARV (DTMMENU);
$STR_DESC_INIT(DESC=D_DTMSTR, STRING=(18,CH$PTR(DTMSTR)));
! Find the Date/Time XAB, if any
XABDAT=.FAB[FAB$A_XAB]; ! Head of XAB chain
WHILE .XABDAT[XABDAT$H_BID] NEQ XABDAT$K_BID
DO (IF (XABDAT=.XABDAT[XABDAT$A_NXT]) EQL 0 THEN EXITLOOP);
IF .XABDAT NEQ 0 ! If we found a Date/Time XAB
THEN
BEGIN
DAP$GET_BITVECTOR(DD[$],DTMMENU,2);
IF .DTMMENU[DAP$V_DTM_CDT] ! Creation date time
THEN BEGIN
DAP$GET_DATE(DD[$],CH$PTR(DTMSTR));
XABDAT[XABDAT$G_CDT]=S$STRDT(D_DTMSTR);
END;
IF .DTMMENU[DAP$V_DTM_RDT] ! Read date time
THEN BEGIN
DAP$GET_DATE(DD[$],CH$PTR(DTMSTR));
XABDAT[XABDAT$G_RDT]=S$STRDT(D_DTMSTR);
END;
IF .DTMMENU[DAP$V_DTM_EDT] ! Scratch date time
THEN BEGIN
DAP$GET_DATE(DD[$],CH$PTR(DTMSTR));
XABDAT[XABDAT$G_EDT]=S$STRDT(D_DTMSTR);
END;
IF .DTMMENU[DAP$V_DTM_RVN] ! Revision number
THEN RVN=DAP$GET_2BYTE(DD[$]);
IF .DTMMENU[DAP$V_DTM_BDT] ! Backup date time
THEN BEGIN
DAP$GET_DATE(DD[$],CH$PTR(DTMSTR));
!When we put this in the RMS block we can save it
!XABDAT[XABDAT$G_BDT]=S$STRDT(D_DTMSTR);
END;
IF .DTMMENU[DAP$V_DTM_PDT] ! Internal date time
THEN BEGIN
DAP$GET_DATE(DD[$],CH$PTR(DTMSTR));
!When we put this in the RMS block we can save it
!XABDAT[XABDAT$G_PDT]=S$STRDT(D_DTMSTR);
END;
IF .DTMMENU[DAP$V_DTM_ADT] ! Access date time ![12]
THEN BEGIN
DAP$GET_DATE(DD[$],CH$PTR(DTMSTR));
!When we put this in the RMS block we can save it
!XABDAT[XABDAT$G_ADT]=S$STRDT(D_DTMSTR);
END;
END
ELSE DAP$EAT_MESSAGE(DD[$]); ! No place to put it
END;
%(
[DAP$K_PROTECT]: !Protection extension message
BEGIN
LOCAL PROT;
LOCAL PROMENU: BITVECTOR[14]; !Menu
LOCAL OWNER: VECTOR[CH$ALLOCATION(40)];
CLEARV(PROMENU);
DAP$GET_BITVECTOR(DD[$],PROMENU,2); !Get the menu
IF .PROMENU[PRO_OWNER]
THEN DAP$GET_VARIABLE_STRING(DD[$],CH$PTR(OWNER),40);
IF .PROMENU[PRO_PROTSYS]
THEN
BEGIN
PROT=0;
DAP$GET_BITVECTOR(DD[$],PROT,3); !System protection
%IF %DECLARED(XABPRO$Z_SYS)
%THEN XABPRO[XABPRO$Z_SYS]=PRO_DS(.PROT);
%FI
END;
IF .PROMENU[PRO_PROTOWN]
THEN
BEGIN
PROT=0;
DAP$GET_BITVECTOR(DD[$],T,3); !Owner protection
XABPRO[XABPRO$Z_OWN]=PRO_DS(.T);
END;
IF .PROMENU[PRO_PROTGRP]
THEN
BEGIN
PROT=0;
DAP$GET_BITVECTOR(DD[$],T,3); !Owner protection
XABPRO[XABPRO$Z_GRP]=PRO_DS(.T);
END;
IF .PROMENU[PRO_PROTWLD]
THEN
BEGIN
PROT=0;
DAP$GET_BITVECTOR(DD[$],T,3); !Owner protection
XABPRO[XABPRO$Z_WLD]=PRO_DS(.T);
END;
END;
)%
[DAP$K_NAME]:
BEGIN
BIND NAM=.FAB[FAB$A_NAM]: $NAM_DECL;
LOCAL FILESPEC: VECTOR[CH$ALLOCATION(255)]; !Store filespec
LOCAL NAMETYPE: BITVECTOR[21];
LOCAL NDS, ! Length of nodeid
DVS, ! Length of device
DIS, ! Length of directory
NAS; ! Length of name
LOCAL DELIM;
CLEARV(NAMETYPE);
IF NAM EQL 0 THEN SIGNAL(RMS$_NAM,0,FAB[$]);
! Must have a NAM block
DAP$GET_BITVECTOR(DD[$],NAMETYPE,3);
IF (.NAMETYPE AND .NAMETYPES_SEEN) NEQ 0
THEN RETURN DAP$UNGET_HEADER(DD[$]);
! If this is the second NAME message of this type for this call
! then it must be for the next file and should not be
! read until the next call (Directory List)
NAMETYPES_SEEN=.NAMETYPES_SEEN OR .NAMETYPE;
IF .NAMETYPE[DAP$K_NAMETYPE_STR] ! Structure
THEN
BEGIN
DAP$GET_VARIABLE_STRING(DD[$],CH$PTR(NAM[NAM$T_DVI]),
DEVICE_NAME_LENGTH);
NAM[NAM$V_CHA_STR]=1;
NAM[NAM$V_FNB_WILDCARD]=1; ! Something is wildcarded
! (not necessarily this)
! (3-part name indicates this)
END;
IF .NAMETYPE[DAP$K_NAMETYPE_DIR] ! Directory
THEN
BEGIN
NAM[NAM$V_CHA_DIR]=1;
DAP$GET_VARIABLE_STRING(DD[$],CH$PTR(NAM[NAM$T_DIR]),
DIRECTORY_NAME_LENGTH);
NAM[NAM$V_FNB_WILDCARD]=1; ! Something is wildcarded
END;
IF .NAMETYPE[DAP$K_NAMETYPE_NAM] ! File name
THEN
BEGIN
LOCAL D_FILESPEC: $STR_DESCRIPTOR(CLASS=DYNAMIC);
LOCAL BD_FILESPEC: $STR_DESCRIPTOR(CLASS=BOUNDED);
$STR_DESC_INIT(DESC=D_FILESPEC, CLASS=DYNAMIC);
$XPO_GET_MEM(DESC=D_FILESPEC, CHARACTERS=255);
NAS=DAP$GET_VARIABLE_STRING(DD[$], ! Get file name in temp
.D_FILESPEC[STR$A_POINTER],
255);
$STR_DESC_INIT(DESC=BD_FILESPEC, CLASS=BOUNDED,
STRING=(.NAS,.D_FILESPEC[STR$A_POINTER]));
$STR_SCAN(REMAINDER=BD_FILESPEC, SUBSTRING=BD_FILESPEC,
DELIMITER=DELIM,
STOP='.;<');
$STR_COPY(STRING=$STR_CONCAT(BD_FILESPEC,D_NULL),
TARGET=(FILE_NAME_LENGTH,
CH$PTR(NAM[NAM$T_NAM])));
IF .DELIM EQL %C'.'
THEN
BEGIN
BD_FILESPEC[STR$H_LENGTH]=
.BD_FILESPEC[STR$H_LENGTH]+1; ! skip delimiter
$STR_SCAN(REMAINDER=BD_FILESPEC,
SUBSTRING=BD_FILESPEC,
DELIMITER=DELIM,
STOP='.;<');
$STR_COPY(STRING=
$STR_CONCAT('.',BD_FILESPEC,D_NULL),
TARGET=(FILE_NAME_LENGTH,
CH$PTR(NAM[NAM$T_EXT])),
OPTION=TRUNCATE);
END;
IF (.DELIM EQL %C';') OR (.DELIM EQL %C'.')
THEN ! Version/Generation number
BEGIN
$STR_SCAN(REMAINDER=BD_FILESPEC,
SUBSTRING=BD_FILESPEC,
DELIMITER=.DELIM,
SPAN=';.0123456789-*'); ! Generation number
! Now Copy the generation number into the name block
! if it really is a generation number,
! i.e. .### or ;###.
! If we really got ;T or ;Afoo or ;P#####, ignore it.
IF .BD_FILESPEC[STR$H_LENGTH] GTR 1
THEN $STR_COPY(STRING=$STR_CONCAT(BD_FILESPEC,D_NULL),
TARGET=(RMS$K_VERSION_SIZE,
CH$PTR(NAM[NAM$T_VER])),
OPTION=TRUNCATE);
END;
DVS=ASCIZ_LEN(CH$PTR(NAM[NAM$T_DVI]));
DIS=ASCIZ_LEN(CH$PTR(NAM[NAM$T_DIR]));
NDS=ASCIZ_LEN(CH$PTR(NAM[NAM$T_NODE]));
BEGIN ! Build resultant string
LOCAL D_RESULTANT: $STR_DESCRIPTOR(CLASS=BOUNDED);
$STR_DESC_INIT(DESC=D_RESULTANT, CLASS=BOUNDED,
STRING=(.NAM[NAM$H_RSS],
.NAM[NAM$A_RSA]));
IF (.NDS+.DVS+.DIS+.NAS) GTR .NAM[NAM$H_RSS]
THEN SIGNAL(RMS$_NAM, 0, FAB[$]); ![11] Won't fit
! Concatenate the Device, Directory, and filespec
$STR_COPY(STRING=
$STR_CONCAT(
(.NDS,CH$PTR(NAM[NAM$T_NODE])), ![11]
(.DVS,CH$PTR(NAM[NAM$T_DVI])),
(.DIS,CH$PTR(NAM[NAM$T_DIR])),
(.NAS,.D_FILESPEC[STR$A_POINTER])),
TARGET=D_RESULTANT,
OPTION=TRUNCATE);
$XPO_FREE_MEM(STRING=D_FILESPEC);
NAM[NAM$H_RSL]=.D_RESULTANT[STR$H_LENGTH];
END;
END;
IF .NAMETYPE[DAP$K_NAMETYPE_FSP] ! Resultant filespec
THEN
BEGIN ! Store resultant filespec
LOCAL ressize; ! Length of resultant
IF (ressize=DAP$GET_BYTE(DD[$])) GTR 0 ! if non-null
THEN
BEGIN
LOCAL nodedesc: $STR_DESCRIPTOR();
$STR_DESC_INIT
(DESC=nodedesc,
STRING=ASCIZ_STR(CH$PTR(NAM[NAM$T_NODE])));
IF .ressize+.nodedesc[STR$H_LENGTH] GEQ .NAM[NAM$H_RSS]
THEN ! Make sure it will fit
SIGNAL(RMS$_NAM, 0, FAB[$]) ![11] Too big
ELSE
BEGIN
LOCAL rptr,
rlen;
$STR_COPY(STRING=NODEDESC,
TARGET=(.NODEDESC[STR$H_LENGTH],
.NAM[NAM$A_RSA]));
rlen=.NAM[NAM$H_RSS]-.nodedesc[str$h_length];
rptr=CH$PLUS(.NAM[NAM$A_RSA],
.nodedesc[str$h_length]);
DAP$UNGET_BYTE(DD[$]); ! string getter needs count
NAM[NAM$H_RSL]=DAP$GET_VARIABLE_STRING
(DD[$],.rptr,.rlen)
+.nodedesc[STR$H_LENGTH];
END;
END;
END;
%IF FTPASSIVE ! FAL only
%THEN
IF .ACCFUNC EQL DAP$K_RENAME
THEN BEGIN !This is for a new name
ACCESS(FAB[$]); !Try to rename the file
RETURN DAP$K_NAME; !end of setup sequence
END;
%ERROR('Passive Rename not implemented')
%FI
END;
%IF FTPASSIVE %THEN
[DAP$K_ACCESS]:
BEGIN
LOCAL FILESPEC: VECTOR[CH$ALLOCATION(200)];
LOCAL DISPLAY: BITVECTOR[28], !DISPLAY field for attributes to return
PASSWORD: VECTOR[CH$ALLOCATION(41)],
ACCFUNC,
ACCOPT: BITVECTOR[28],
FAC: BITVECTOR[28],
SHR: BITVECTOR[28];
ACCFUNC=GET_BYTE(DD[$]); !OPEN/CREATE/ERASE/RENAME
DAP$GET_BITVECTOR(DD[$],N[ACCOPT],5); !Access options
DAP$GET_VARIABLE_STRING(DD[$],CH$PTR(FILESPEC),200);
!Store remote filespec in temp
IF .DD[DAP$H_LENGTH] GTR 0
THEN
BEGIN
DAP$GET_BITVECTOR(DD[$],FAC,3); !File access options
$DAP_MOVE_BITS(FAC,DAP$V_FAC_,FAB,FAB$V_FAC_,
PUT,GET,DEL,UPD,TRN,
BIO,BRO,APP);
END;
IF .DD[DAP$H_LENGTH] GTR 0
THEN
BEGIN
DAP$GET_BITVECTOR(DD[$],SHR,3); !Shared operations
$DAP_MOVE_BITS(FAC,DAP$V_FAC_,FAB,FAB$V_SHR_,
PUT,GET,DEL,UPD,TRN,
BIO,BRO,APP);
IF .DD[DAP$H_LENGTH] GTR 0
THEN DAP$GET_BITVECTOR(DD[$],DISPLAY,4);
!What attributes should we return?
! IGNORE FOR NOW
IF .DD[DAP$H_LENGTH] GTR 0
THEN DAP$GET_VARIABLE_STRING(DD[$],CH$PTR(PASSWORD),40);
!Password for file access
!If this is a RENAME, then get a NAME message
!Otherwise, try to do the access
IF .WAIT_FOR_NAME EQL 0
THEN ACCESS(FAB[$]); !Try to do it
IF (.N[ACCFUNC] EQL DAP$K_OPEN)
OR (.N[ACCFUNC] EQL DAP$K_CREATE)
THEN
BEGIN !Return attributes of our file
D$PATT(DD[$],FAB[$]); !Build attributes & send
DAP$PUT_MESSAGE(DD[$]); !Force it out
END;
ACKNOWLEDGE; !Otherwise just ACK
!The documentation is ambiguous here
!as to what response should occur for RENAME or DELETE
N[GOT_ACC]=1; !Remember we got it
IF .WAIT_FOR_NAME EQL 0
THEN RETURN DAP$K_ACCESS;
END; !DAP_ACC
%FI !FTPASSIVE
[DAP$K_STATUS]: ! Some sort of error from other end
BEGIN
BIND C=D$GSTS(DD[$]);
SIGNAL(C);
RETURN C
END;
[DAP$K_ACCESS_COMPLETE]: ! Rename & Delete would return ACM
BEGIN
BIND DIB=.FAB[FAB$A_DIB]: $DIB;
LOCAL CMPFUNC;
LOCAL FOP: BITVECTOR[42];
CMPFUNC=DAP$GET_BYTE(DD[$]);
IF .CMPFUNC NEQ DAP$K_ACCOMP_RESPONSE
THEN SIGNAL(RMS$_DPE,0,FAB[$]);
DIB[DIB$V_ACCESS_ACTIVE]=0; ! Access is no longer active
!% FAL WORKAROUND
! If all we get is an ACCESS COMPLETE (without any attrs first)
! Then assume we cannot access the directory.
! For some reason TOPS-10 & TOPS-20 FALs do not give a status
! for this, but merely return immediate ACCESS COMPLETE!!!
! RSTS does exactly the same thing on file-not-found
IF (.OMTYPE EQL -1) ! First message of this call?
AND (.T20BUG[T20_BUG_NO_DIR_PRV] ! And workaround enabled
OR .RSTBUG[RST_BUG_NO_DIR_FNF])
THEN
BEGIN
SELECT .CONFIG[CONFIG$B_OSTYPE] OF
SET
[DAP$K_TOPS20]: FAB[FAB$H_STS]=RMS$_PRV;
[DAP$K_RSTS]: FAB[FAB$H_STS]=RMS$_FNF;
[DAP$K_TOPS20, DAP$K_RSTS]:
SIGNAL(.FAB[FAB$H_STS],0,FAB[$]);
TES;
END;
DAP$GET_BITVECTOR(DD[$],FOP,6);
$DAP_MOVE_BITS(FOP,DAP$K_FOP_,FAB,FAB$V_FOP_,
RWO,RWC,POS,DLK,LCK,
CTG,SUP,NEF,TMP,MKD,DMO,
WCK,RCK,CIF,LKO,SQO,MXV,SPL,
SCF,DLT,CBT,WAT,DFW,TEF,
DRJ);
IF .DD[DAP$H_BYTES_REMAINING] GTR 0
THEN
BEGIN
LOCAL CHECKSUM;
CHECKSUM=DAP$GET_2BYTE(DD[$]);
!? Can check checksum here when we implement that stuff
END;
RETURN DAP$K_ACCESS_COMPLETE;
END;
[DAP$K_ACK]:
RETURN DAP$K_ACK; ! Normal exit from this routine
[OTHERWISE]:
BEGIN
DAP_ERROR(DD[$],DAP$K_MAC_SYNC,.DD[DAP$B_OPERATOR]);
RETURN .DD[DAP$B_OPERATOR]
END;
TES;
END; !WHILE 1
.MTYPE ! Return message type if we ever get here
END; !End of DAP$GET_ATTRIBUTES (D$GATT) (process ATTRIBUTES)
GLOBAL ROUTINE DAP$PUT_CONFIG(DD: REF $DAP_DESCRIPTOR, BUFSIZ): NOVALUE=
!++
! FUNCTIONAL DESCRIPTION:
!
! Build a CONFIG message, using specified buffer size
!
! FORMAL PARAMETERS:
!
! DD: A DAP message descriptor
! BUFSIZ: Buffer size to send to other system
!
!--
BEGIN
INIT_MESSAGE(DD[$]); !
DD[DAP$B_OPERATOR]=DAP$K_CONFIG; ! Build header
DAP$PUT_HEADER(DD[$]); !
DAP$PUT_2BYTE(DD[$],.BUFSIZ); ! Put buffersize
DAP$PUT_STRING(DD[$],D_CFGTAIL); ! and rest of message
END; ! DAP$PUT_CONFIG
GLOBAL ROUTINE DAP$PUT_ATTRIBUTES(DD,FAB): NOVALUE=
!++
! FUNCTIONAL DESCRIPTION:
!
! Build attributes message from associated file block & send it.
!
! FORMAL PARAMETERS:
!
! DD: Address of a DAP descriptor
! FAB: Address of RMS FAB
!
! IMPLICIT OUTPUTS:
!
! An ATTRIBUTES message is put in the output buffer.
!
!--
BEGIN
MAP DD: REF $DAP_DESCRIPTOR,
FAB: REF $FAB_DECL;
BIND TYP=.FAB[FAB$A_TYP]: $TYP_DECL;
BIND DIB=.FAB[FAB$A_DIB]: $DIB;
BIND CONFIG=.DIB[DIB$A_CONFIG]: $CONFIG;
LOCAL
MLENGTH: INITIAL(0), !Length of this message (data portion)
ATTMENU: BITVECTOR[42] INITIAL(0), !Attributes menu field
DATATYPE: BITVECTOR[14] INITIAL(0), !Data representation
ORG: INITIAL(0), !File organization
RFM: INITIAL(0), !Record format
RAT: BITVECTOR[21] INITIAL(0), !Record attributes
BLS: INITIAL(512), ![4] default=512 !Block size
MRS: INITIAL(0), !Record size
ALQ: INITIAL(0), !File size
BKS: INITIAL(0), !Bucket size
FSZ: INITIAL(0), !Fixed portion size
MRN: BYTE8VECTOR[6] INITIAL(0), !Max record number
RUNSYS: BYTE8VECTOR[41] INITIAL(0), !Runtime system
DEQ: INITIAL(0), !Default extension quantity
BSZ: INITIAL(0), !Byte size
DEV: BITVECTOR[42] INITIAL(0), !Device characteristics
SDC: BITVECTOR[42] INITIAL(0), !Spooling dev characteristics
NOK: INITIAL(0),
NOA: INITIAL(0),
NOR: INITIAL(0),
CDT: BYTE8VECTOR[18] INITIAL(0), !Create date
RDT: BYTE8VECTOR[18] INITIAL(0), !Update date
EDT: BYTE8VECTOR[18] INITIAL(0), !Scratch date
OWNER: BYTE8VECTOR[40] INITIAL(0),
PROTSYS: BITVECTOR[21] INITIAL(0),
PROTOWN: BITVECTOR[21] INITIAL(0),
PROTGRP: BITVECTOR[21] INITIAL(0),
PROTWLD: BITVECTOR[21] INITIAL(0),
FOP: BITVECTOR[42] INITIAL(0);
BSZ=.FAB[FAB$Z_BSZ]; !Byte size
! Set up DATATYPE
IF (TYP NEQ 0)
THEN CASE .TYP[TYP$H_CLASS] FROM 0 TO TYP$K_CLASS_MAX OF
SET
[0, TYP$K_CLASS_ASCII]:
BEGIN
DATATYPE[DAP$V_DATATYPE_ASCII]=1;
BLS=OUR_BLOCK_SIZE*(%BPVAL/.BSZ); ! Block size in bytes
IF .FAB[FAB$Z_RFM] EQL FAB$K_RFM_VAR ! If /ASCII/VARIABLE
OR .FAB[FAB$Z_RFM] EQL FAB$K_RFM_FIX ! or /ASCII/FIXED
THEN RAT[DAP$V_RAT_CR]=1; ! Assume implied CRLF
END;
[TYP$K_CLASS_IMAGE]: DATATYPE[DAP$V_DATATYPE_IMAGE]=1;
[TYP$K_CLASS_MACY11]:
BEGIN
DATATYPE[DAP$V_DATATYPE_IMAGE]=1; ! Looks like image on remote
!% RAT[DAP$V_RAT_MACY11]=1;
! Nobody supports this bit
END;
[OUTRANGE]: SIGNAL(DAP$_AOR,0,TYP);
TES;
!% BSZ of other than 8 is not supported on non-36-bit systems
SELECT .CONFIG[CONFIG$B_OSTYPE] OF
SET
[DAP$K_TOPS20, DAP$K_TOPS10]: ; ! OK
[OTHERWISE]: BSZ=0; ! Don't send byte size
TES;
! Device is a file-structured disk
DEV[DAP$V_DEV_MDI]=DEV[DAP$V_DEV_FOD]=DEV[DAP$V_DEV_SHR]
=DEV[DAP$V_DEV_MNT]=DEV[DAP$V_DEV_IDV]=DEV[DAP$V_DEV_ODV]
=DEV[DAP$V_DEV_AVL]=DEV[DAP$V_DEV_ELG]=DEV[DAP$V_DEV_RAD]=1;
ALQ=.FAB[FAB$G_ALQ]; ! Allocation quantity
!Turn on extension bits where needed & count # of bytes
BEGIN
LOCAL T;
T=DAP$SIZE_BITVECTOR(DATATYPE,2,0);
IF (.T GTR 0) THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_DAT]=1; !Remember to send it
MLENGTH=.MLENGTH+.T; !Add approprioate # of bytes
END;
ORG=$DAP_TRANSLATE_VALUE(.FAB[FAB$Z_ORG],
FAB$K_ORG_,DAP$K_ORG_,
SEQ,REL,IDX,DIR);
IF .ORG NEQ DAP$K_ORG_SEQ THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_ORG]=1;
MLENGTH=.MLENGTH+1;
END;
RFM=$DAP_TRANSLATE_VALUE(.FAB[FAB$Z_RFM],
FAB$K_RFM_,DAP$K_RFM_,
UDF,FIX,VAR,VFC,STM,LSA);
IF .RFM NEQ DAP$K_RFM_FIX THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_RFM]=1;
MLENGTH=.MLENGTH+1;
END;
$DAP_MOVE_BITS(FAB,FAB$V_RAT_,RAT,DAP$V_RAT_,
FTN,CR,BLK,EFC,CBL,LSA);
T=DAP$SIZE_BITVECTOR(RAT,3,0);
IF .T GTR 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_RAT]=1;
MLENGTH=.MLENGTH+.T;
END;
!
! BLS field
!
IF .BLS NEQ 512
THEN ATTMENU[DAP$V_ATTMENU_BLS]=1;
IF .RSXBUG[RSX_BUG_NOT_WANT_BLS]
THEN
BEGIN
IF (.CONFIG[CONFIG$B_FILESYS] EQL DAP$K_FILESYS_FCS11)
THEN ATTMENU[DAP$V_ATTMENU_BLS]=0; ! Don't send BLS to this
END;
IF .ATTMENU[DAP$V_ATTMENU_BLS] ! If we are sending BLS
THEN MLENGTH=.MLENGTH+2; ! allow 2 bytes for it
!
! MRS field
!
MRS=.FAB[FAB$H_MRS]; ! Max record size
IF .MRS NEQ 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_MRS]=1;
MLENGTH=.MLENGTH+2;
END;
IF .ALQ NEQ 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_ALQ]=1;
MLENGTH=.MLENGTH+5;
END;
IF .BKS NEQ 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_BKS]=1;
MLENGTH=.MLENGTH+1;
END;
IF .FSZ NEQ 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_FSZ]=1;
MLENGTH=.MLENGTH+1;
END;
IF (T=.MRN[0]) NEQ 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_MRN]=1;
MLENGTH=.MLENGTH+.T;
END;
IF (T=.RUNSYS[0]) NEQ 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_RUN]=1;
MLENGTH=.MLENGTH+.T;
END;
IF .DEQ NEQ 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_DEQ]=1;
MLENGTH=.MLENGTH+2;
END;
$DAP_MOVE_BITS(FAB,FAB$V_FOP_,FOP,DAP$V_FOP_,
RWO,RWC,POS,DLK,LCK,
CTG,SUP,NEF,TMP,MKD,DMO,
WCK,RCK,CIF,LKO,SQO,MXV,SPL,
SCF,DLT,CBT,WAT,%(DFW)% ,TEF,DRJ); ! DFW not supported
! by most FALs
T=DAP$SIZE_BITVECTOR(FOP,6,0);
IF .T GTR 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_FOP]=1;
MLENGTH=.MLENGTH+.T;
END;
IF (.BSZ NEQ 0) THEN ! Send BSZ unless 0
BEGIN
ATTMENU[DAP$V_ATTMENU_BSZ]=1;
MLENGTH=.MLENGTH+1;
END;
T=DAP$SIZE_BITVECTOR(DEV,6,0);
IF .T GTR 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_DEV]=1;
MLENGTH=.MLENGTH+.T;
END;
T=DAP$SIZE_BITVECTOR(SDC,6,0);
IF .T GTR 0 THEN
BEGIN
ATTMENU[DAP$V_ATTMENU_SDC]=1;
MLENGTH=.MLENGTH+.T;
END;
END;
MLENGTH=.MLENGTH+$DAP_SIZE_BITVECTOR(ATTMENU,6);
INIT_MESSAGE(DD[$]);
DD[DAP$B_OPERATOR]=DAP$K_ATTRIBUTES; ! This is attributes message
DD[DAP$V_MFLAGS_LENGTH]=1; ! We will send length field
DD[DAP$H_LENGTH]=.MLENGTH; ! Set up message length in header
DAP$PUT_HEADER(DD[$]); ! Build the message header
DAP$PUT_BITVECTOR(DD[$],ATTMENU,6); !Menu field
IF .ATTMENU[DAP$V_ATTMENU_DAT] THEN DAP$PUT_BITVECTOR(DD[$],DATATYPE,2);
IF .ATTMENU[DAP$V_ATTMENU_ORG] THEN PUT_BYTE(DD[$],.ORG);
IF .ATTMENU[DAP$V_ATTMENU_RFM] THEN PUT_BYTE(DD[$],.RFM);
IF .ATTMENU[DAP$V_ATTMENU_RAT] THEN DAP$PUT_BITVECTOR(DD[$],RAT,3);
IF .ATTMENU[DAP$V_ATTMENU_BLS] THEN PUT_2BYTE(DD[$],.BLS);
IF .ATTMENU[DAP$V_ATTMENU_MRS] THEN PUT_2BYTE(DD[$],.MRS);
IF .ATTMENU[DAP$V_ATTMENU_ALQ] THEN PUT_LONGWORD(DD[$],.ALQ);
IF .ATTMENU[DAP$V_ATTMENU_BKS] THEN PUT_BYTE(DD[$],.BKS);
IF .ATTMENU[DAP$V_ATTMENU_FSZ] THEN PUT_BYTE(DD[$],.FSZ);
IF .ATTMENU[DAP$V_ATTMENU_MRN] THEN PUT_LONGWORD(DD[$],.MRN);
IF .ATTMENU[DAP$V_ATTMENU_RUN]
THEN DAP$PUT_VARIABLE_COUNTED(DD[$],CH$PTR(RUNSYS,0,8));
IF .ATTMENU[DAP$V_ATTMENU_DEQ] THEN PUT_2BYTE(DD[$],.DEQ);
IF .ATTMENU[DAP$V_ATTMENU_FOP] THEN DAP$PUT_BITVECTOR(DD[$],FOP,6);
IF .ATTMENU[DAP$V_ATTMENU_BSZ] THEN PUT_BYTE(DD[$],.BSZ);
IF .ATTMENU[DAP$V_ATTMENU_DEV] THEN DAP$PUT_BITVECTOR(DD[$],DEV,6);
IF .ATTMENU[DAP$V_ATTMENU_SDC] THEN DAP$PUT_BITVECTOR(DD[$],SDC,6);
!Now send the DATE & TIME message if needed
%(
IF .C[CONFIG$V_DTM]
AND ((.CDT NEQ 0) OR (.RDT NEQ 0) OR (.EDT NEQ 0))
THEN BEGIN
LOCAL DTMMENU: BITVECTOR[42]; !Menu for this message
CLEARV(DTMMENU); !initially 0
INIT_MESSAGE(DD[$]);
DD[DAP$H_MLENGTH]=1; !The menu field is always sent
IF .CDT NEQ 0 THEN
BEGIN
DTMMENU[DTM_CDT]=1;
DD[DAP$H_MLENGTH]=19;
END;
IF .RDT NEQ 0 THEN
BEGIN
DTMMENU[DTM_RDT]=1;
DD[DAP$H_MLENGTH]=.DD[DAP$H_MLENGTH]+18;
END;
IF .EDT NEQ 0 THEN
BEGIN
DTMMENU[DTM_EDT]=1;
DD[DAP$H_MLENGTH]=.DD[DAP$H_MLENGTH]+18;
END;
DD[DAP$V_MFLAGS_LENGTH]=1; !Length field present
DAP$PUT_HEADER(DD[$]);
DAP$PUT_BITVECTOR(DD[$],DTMMENU,6); !Send the menu
!Dates are always 18-character fields
IF .DTMMENU[DTM_CDT] THEN PUT_18BYTE(CDT); !Creation date
IF .DTMMENU[DTM_RDT] THEN PUT_18BYTE(RDT); !Access date
IF .DTMMENU[DTM_EDT] THEN PUT_18BYTE(EDT); !Scratch date
END; !of code to send DATE & TIME message
!
! Send PROTECTION message if needed
!
BEGIN !Send PROTECTION message if needed
LOCAL PROMENU: BITVECTOR[42];
CLEARV (PROMENU);
DD[DAP$H_MLENGTH]=
(1 !The menu is 1 byte long
+(IF (.OWNER[0] NEQ 0)
THEN (PROMENU[PRO_OWNER]=1;.OWNER[0]+1)
ELSE 0)
+(LOCAL BC; !Byte count for field
BC=DAP$SIZE_BITVECTOR(PROTSYS,3,0);
IF .BC GTR 0
THEN (PROMENU[PRO_PROTSYS]=1;.BC)
ELSE 0)
+(LOCAL BC; !Byte count for field
BC=DAP$SIZE_BITVECTOR(PROTOWN,3,0);
IF .BC GTR 0
THEN (PROMENU[PRO_PROTOWN]=1;.BC)
ELSE 0)
+(LOCAL BC; !Byte count for field
BC=DAP$SIZE_BITVECTOR(PROTGRP,3,0);
IF .BC GTR 0
THEN (PROMENU[PRO_PROTGRP]=1;.BC)
ELSE 0)
+(LOCAL BC; !Byte count for field
BC=DAP$SIZE_BITVECTOR(PROTWLD,3,0);
IF .BC GTR 0
THEN (PROMENU[PRO_PROTWLD]=1;.BC)
ELSE 0));
IF (.MLENGTH GTR 1) AND .CONFIG[CONFIG$V_PROTECTION]
THEN BEGIN !We need to send it
INIT_MESAGE(DD[$]);
DD[DAP$B_OPERATOR]=DAP$K_PROTECTION; !Message type
DD[DAP$V_MFLAGS_LENGTH]=1; !Length field present
DAP$PUT_HEADER(DD[$]);
DAP$PUT_BITVECTOR(DD[$],PROMENU,6); !Menu
IF .PROMENU[PRO_OWNER] ! OWNER field
THEN DAP$PUT_VARIABLE_COUNTED(DD[$],CH$PTR(OWNER,0,8));
IF .PROMENU[PRO_PROTSYS]
THEN DAP$PUT_BITVECTOR(DD[$],PROTSYS,3); !SYSTEM
IF .PROMENU[PRO_PROTOWN]
THEN DAP$PUT_BITVECTOR(DD[$],PROTOWN,3); !OWNER
IF .PROMENU[PRO_PROTGRP]
THEN DAP$PUT_BITVECTOR(DD[$],PROTGRP,3); !GROUP
IF .PROMENU[PRO_PROTWLD]
THEN DAP$PUT_BITVECTOR(DD[$],PROTWLD,3); !WORLD
END;
END; !of code to send PROTECTION message
)%
END; !DAP$PUT_ATTRIBUTES
GLOBAL ROUTINE DAP$PUT_ACCESS (DD,FAB,ACCFUNC,ACCOPT,DISPLAY,NFAB): NOVALUE=
BEGIN
!++
! FUNCTIONAL DESCRIPTION:
!
! build ACCESS message & put in output buffer
!
! FORMAL PARAMETERS:
!
! DD: Address of DAP descriptor
! FAB: " " RMS FAB
! ACCFUNC: Access Function to perform
! ACCOPT: Access option bits (DAP)
! DISPLAY: Display Bits (DAP)
! NFAB: FAB with New name for rename
!
! IMPLICIT OUTPUTS:
!
! An ACCESS msg will be put in the output buffer
!
! ROUTINE VALUE:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
MAP DD: REF $DAP_DESCRIPTOR,
FAB: REF $FAB_DECL,
NFAB: REF $FAB_DECL,
ACCOPT: REF BITVECTOR,
DISPLAY: REF BITVECTOR;
BIND NAM=.FAB[FAB$A_NAM]: $NAM_DECL; ! Name block (if any)
LOCAL
C,
NPTR,
TNPTR,
FAC: BITVECTOR[21],
SHR: BITVECTOR[21];
LOCAL REMOTEFILE: VECTOR[256/(%BPVAL/8)];
CLEARV(FAC,SHR);
INIT_MESSAGE(DD[$]);
DD[DAP$B_OPERATOR]=DAP$K_ACCESS;
DD[DAP$V_MFLAGS_LENGTH]=1; ! Length field present always
!Make sure we request enough access to do what we want
CASE .ACCFUNC FROM DAP$K_OPEN TO DAP$K_ACCFUNC_MAX OF SET
[DAP$K_OPEN]: FAB[FAB$V_FAC_GET]=1; !Ask for GET access
[DAP$K_CREATE,DAP$K_SUBMIT]:
FAB[FAB$V_FAC_PUT]=1; !Ask for PUT access
[INRANGE]: ; ! Not needed
[OUTRANGE]: SIGNAL(DAP$_AOR,DD[$]);
TES;
$DAP_MOVE_BITS(FAB,FAB$V_FAC_,FAC,DAP$V_FAC_,
GET,PUT,BIO,TRN,UPD,BRO); ! Massage RMS FAC bits into DAP
$DAP_MOVE_BITS(FAB,FAB$V_SHR_,SHR,DAP$V_FAC_,
GET,PUT,BIO,TRN,UPD,BRO); ! Massage RMS SHR bits into DAP
! If we have a resultant name string, use it.
! If not, try expanded name string.
! If we have neither of those, or no name block at all, use the original string
IF NAM NEQ 0
THEN
BEGIN
IF .NAM[NAM$H_RSL] NEQ 0
THEN NPTR=.NAM[NAM$A_RSA]
ELSE IF .NAM[NAM$H_ESL] NEQ 0
THEN NPTR=.NAM[NAM$A_ESA]
ELSE NPTR=.FAB[FAB$A_FNA]
END
ELSE NPTR=.FAB[FAB$A_FNA];
TNPTR=.NPTR; ! Copy pointer
! Scan off nodeid if any
INCR I FROM 0 TO 255
DO IF ((C=CH$RCHAR_A(NPTR)) EQL %C':') AND ((C=CH$RCHAR_A(NPTR)) EQL %C':')
THEN EXITLOOP
ELSE IF .C EQL 0
THEN (NPTR=.TNPTR; EXITLOOP); ! Look for ::
!Find out how long the message will be (and build a few fields in the process)
DD[DAP$H_LENGTH]=(1 !Length so far=1
+$DAP_SIZE_BITVECTOR(.ACCOPT,5) ! +# of bytes of ACCOPT
+CHAZAC(.NPTR,CH$PTR(REMOTEFILE,0,8))+1
!Add length of the file name +1 for count byte
+$DAP_SIZE_BITVECTOR(FAC,3,
SHR,3,
.DISPLAY,4)
);
!Now build the message a field at a time
DAP$PUT_HEADER(DD[$]); ! First, the message header
PUT_BYTE(DD[$],.ACCFUNC); !Access function
DAP$PUT_BITVECTOR(DD[$],.ACCOPT,5); !Access options
PUT_VARIABLE_COUNTED(DD[$],CH$PTR(REMOTEFILE,0,8)); !Remote file spec
DAP$PUT_BITVECTOR(DD[$],FAC,3); !FAC
DAP$PUT_BITVECTOR(DD[$],SHR,3); !SHR
DAP$PUT_BITVECTOR(DD[$],.DISPLAY,4); !DISPLAY
IF .ACCFUNC EQL DAP$K_RENAME
THEN
BEGIN ! [4] Pass address of bitvector
LOCAL NAMETYPE: BITVECTOR[24] PRESET([DAP$K_NAMETYPE_FSP]=1);
D$PNAM(DD[$],NFAB[$],NAMETYPE); ! New name for rename
END;
END; !D$PACC
GLOBAL ROUTINE D$PNAM(DD,FAB,NAME_TYPE): NOVALUE=
BEGIN
!++
! FUNCTIONAL DESCRIPTION:
!
! Send a NAME message
!
! FORMAL PARAMETERS:
!
! DD: addr of DAP descriptor
! FAB: addr of RMS FAB
! NAME_TYPE: name type (DAP) address of bitvector
!--
MAP DD: REF $DAP_DESCRIPTOR;
MAP FAB: REF $FAB_DECL;
MAP NAME_TYPE: REF BITVECTOR;
LOCAL NPTR;
LOCAL TNPTR;
LOCAL C;
LOCAL
CFILESPEC: VECTOR[200/(%BPVAL/8)]; !Store ASCIC filespec here
NPTR=.FAB[FAB$A_FNA]; ! Scan off nodeid
TNPTR=.NPTR;
! Scan off nodeid if any
INCR I FROM 0 TO 255
DO IF ((C=CH$RCHAR_A(NPTR)) EQL %C':') AND ((CH$RCHAR_A(NPTR)) EQL %C':')
THEN EXITLOOP
ELSE IF .C EQL 0
THEN (NPTR=.TNPTR; EXITLOOP); ! Look for ::
INIT_MESSAGE(DD[$]);
DD[DAP$B_OPERATOR]=DAP$K_NAME;
DD[DAP$V_MFLAGS_LENGTH]=1; !LENGTH field present
DD[DAP$H_LENGTH]=$DAP_SIZE_BITVECTOR(.NAME_TYPE,3)
+CHAZAC(.NPTR,CH$PTR(CFILESPEC,0,8))+1;
!Convert filespec to ASCIC, & compute length of message
! add 1 for count byte
DAP$PUT_HEADER(DD[$]);
DAP$PUT_BITVECTOR(DD[$],.NAME_TYPE,3); ! NAMETYPE field
DAP$PUT_VARIABLE_COUNTED(DD[$],CH$PTR(CFILESPEC,0,8)); ! FILESPEC field
END;
GLOBAL ROUTINE D$PCTL(DD,RAB,CFUN,DISPLAY) :NOVALUE=
BEGIN
!++
! FUNCTIONAL DESCRIPTION:
!
! Build CONTROL message
!
! FORMAL PARAMETERS:
!
! DD: Address of DAP descriptor
! RAB: Address of RMS RAB
! CFUN: Control message function code
! DISPLAY:Address of display bitvector
!
! IMPLICIT INPUTS:
!
!
! IMPLICIT OUTPUTS:
!
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
MAP DD: REF $DAP_DESCRIPTOR, ! Descriptor for message
RAB: REF $RAB_DECL; ! RAB
LOCAL
CTLMENU: BITVECTOR[7],
RAC,
KEY: BYTE8VECTOR[255],
KRF,
ROP: BITVECTOR[42],
ROP_SIZE,
HSH: BITVECTOR[35],
HSH_SIZE,
DISPLAY_SIZE;
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL; ! Find our FAB
CLEARV(CTLMENU,KEY,KRF,ROP,HSH);
INIT_MESSAGE(DD[$]);
DD[DAP$B_OPERATOR]=DAP$K_CONTROL; ! This is a CONTROL message
DD[DAP$V_MFLAGS_LENGTH]=1; ! Always a length field
CTLMENU[DAP$V_CTL_RAC]=1; ! Always have to send a RAC
RAC=$DAP_TRANSLATE_VALUE(.RAB[RAB$Z_RAC],
RAB$K_RAC_,DAP$K_RAC_,
SEQ,REL,IDX,TRA,BLK,BFT);
SELECT .RAB[RAB$Z_RAC] OF
SET
[RAB$K_RAC_BFT]: ! Block mode file transfer
BEGIN
LOCAL KEYVAL;
CTLMENU[DAP$V_CTL_KEY]=1; ! We will send the KEY
KEYVAL=RMS_VBN_TO_DAP(.RAB[RAB$G_BKT]);
KEY[0]=%BPVAL/8; ! Key is converted bucket number
INCR I FROM 1 TO %BPVAL/8 !
DO (KEY[.I]=.KEYVAL; KEYVAL=.KEYVAL^-8);
END;
[RAB$K_RAC_KEY]: ! Key access
BEGIN
CTLMENU[DAP$V_CTL_KEY]=1; ! We will send the key
SELECT .FAB[FAB$Z_ORG] OF
SET
[FAB$K_ORG_REL]: ! Relative file
BEGIN ! Key is Record number
LOCAL KEYVAL; ! KBF is address of record number
KEYVAL=..RAB[RAB$A_KBF];
KEY[0]=%BPVAL/8;
INCR I FROM 1 TO %BPVAL/8
DO (KEY[.I]=.KEYVAL; KEYVAL=.KEYVAL^-8)
END;
[FAB$K_ORG_IDX]: ! Indexed file
BEGIN ! Key is a string
LOCAL KEYPTR;
KEY[0]=.RAB[RAB$Z_KSZ]; ! KSZ is length of string
KEYPTR=.RAB[RAB$A_KBF]; ! Character pointer to key
INCR I FROM 1 TO .KEY[0] ! Copy the string
DO (KEY[.I]=CH$RCHAR_A(KEYPTR));!
END;
TES;
END;
TES;
$DAP_MOVE_BITS(RAB,RAB$V_ROP_,ROP,DAP$V_ROP_,
EOF,FDL,UIF,HSH,LOA,ULK,TPT,
RAH,WBH,KGE,KGT,NLK,RLK,BIO,
LIM,NXR); ! Translate the RMS ROP to a DAP one
ROP_SIZE=DAP$SIZE_BITVECTOR(ROP,6,0); ! Remember the size of this now
IF .ROP_SIZE NEQ 0 THEN CTLMENU[DAP$V_CTL_ROP]=1; !Remember to send if needed
!HSH is reserved as of DAP 6.0
HSH_SIZE=0;
DISPLAY_SIZE=DAP$SIZE_BITVECTOR(.DISPLAY,4,0); ! Remember the size of this now
IF .DISPLAY_SIZE NEQ 0 THEN CTLMENU[DAP$V_CTL_DISPLAY]=1; ! send if needed
DD[DAP$H_LENGTH]=(1 ! Length of CTLFUNC
+DAP$SIZE_BITVECTOR(CTLMENU,4,0) ! Length of menu
+.CTLMENU[DAP$V_CTL_RAC] ! Length of RAC
+(IF .CTLMENU[DAP$V_CTL_KEY]
THEN .KEY[0]+1 ELSE 0) ! Length of KEY
+(.CTLMENU[DAP$V_CTL_KRF]) ! Length of KRF = 1
+.ROP_SIZE ! Length of ROP
+.HSH_SIZE ! Length of HSH
+.DISPLAY_SIZE ! Length of DISPLAY
);
DAP$PUT_HEADER(DD[$]); ! Send the header
DAP$PUT_BYTE(DD[$],.CFUN); !Function code
DAP$PUT_BITVECTOR(DD[$],CTLMENU,4); !Send the menu
IF .CTLMENU[DAP$V_CTL_RAC] !RAC field
THEN DAP$PUT_BYTE(DD[$],.RAC); !
IF .CTLMENU[DAP$V_CTL_KEY] !Key field
THEN PUT_VARIABLE_COUNTED(DD[$],CH$PTR(KEY,0,8));
IF .CTLMENU[DAP$V_CTL_KRF]
THEN PUT_BYTE(DD[$],.KRF); ! KRF field
IF .CTLMENU[DAP$V_CTL_ROP]
THEN DAP$PUT_BITVECTOR(DD[$],ROP,6); ! ROP field
IF .CTLMENU[DAP$V_CTL_HSH]
THEN DAP$PUT_BITVECTOR(DD[$],HSH,5); ! HSH field
IF .CTLMENU[DAP$V_CTL_DISPLAY]
THEN DAP$PUT_BITVECTOR(DD[$],.DISPLAY,4); ! DISPLAY field
END; !D$PCTL
GLOBAL ROUTINE D$GSTS(DD)=
BEGIN
!++
! FUNCTIONAL DESCRIPTION:
!
! Routine to process a (usually unexpected) STATUS message
! Note that the message header must have already been eaten
! Signals error condition & returns code
!
! FORMAL PARAMETERS:
!
! DD: Addr of DAP descriptor
!
! IMPLICIT INPUTS:
!
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! System-dependent error code (but we SIGNAL first)
!
! SIDE EFFECTS:
!
! NONE
!
!--
MAP DD: REF $DAP_DESCRIPTOR;
LOCAL
CODE,
MACCODE,
MICCODE,
RFA: BYTE8VECTOR[9],
RECNUM: BYTE8VECTOR[9],
STV: BYTE8VECTOR[9];
CLEARV(RFA,RECNUM,STV);
CODE=GET_2BYTE(DD[$]); !Put both here for now
MACCODE=.CODE AND DAP$M_MACCODE; !Pick out MACCODE
MICCODE=.CODE AND DAP$M_MICCODE; !and MICCODE
IF .DD[DAP$H_LENGTH] GTR 0 THEN RFA=GET_VBN(DD[$]);
IF .DD[DAP$H_LENGTH] GTR 0 THEN RECNUM=GET_LONGWORD(DD[$]);
IF .DD[DAP$H_LENGTH] GTR 0 THEN STV=GET_LONGWORD(DD[$]);
ERR_DS(.MACCODE,.MICCODE)
END; !DOSTS
GLOBAL ROUTINE DAP$GET_ACK(DD)=
BEGIN
!++
! FUNCTIONAL DESCRIPTION:
!
! Routine to expect and process an ACK message,
! or a STATUS message if we aren't lucky
!
! FORMAL PARAMETERS:
!
! DD: Addr of DAP descriptor
!
! IMPLICIT INPUTS:
!
! Input buffer & pipeline
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! COMPLETION CODES:
!
! STS$K_NORMAL if we get an ACK,
! error code otherwise
!
! SIDE EFFECTS:
!
! The accessed file, if any, will be closed or flushed
!
!--
MAP DD: REF $DAP_DESCRIPTOR;
SELECT GET_HEADER(DD[$])
OF SET
[DAP$K_ACK]: STS$K_NORMAL;
[DAP$K_STATUS]: D$GSTS(DD[$]);
[OTHERWISE]: SIGNAL(DAP$_SYNC,DD[$]);
TES
END; !DAP$GET_ACK
%IF FTPASSIVE
%THEN
GLOBAL ROUTINE DAP$GET_ACCESS_COMPLETE(DD)=
BEGIN
!++
! FUNCTIONAL DESCRIPTION:
!
! Routine to process an ACCESS COMPLETE message
! Note that the message header has already been eaten
!
! FORMAL PARAMETERS:
!
! DD: Addr of DAP descriptor
!
! IMPLICIT INPUTS:
!
! Input buffer & pipeline
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! CMPFUNC: the ACCESS COMPLETE function code
!
! SIDE EFFECTS:
!
! The accessed file, if any, will be closed or flushed
!
!--
LOCAL FOP: BITVECTOR;
LOCAL CMPFUNC;
CMPFUNC=GET_BYTE(DD[$]); !Save ACCOMP function
IF .DD[DAP$H_LENGTH] GTR 0
THEN DAP$GET_BITVECTOR(DD[$],FOP,6); !Get a FOP field if any
CASE .CMPFUNC FROM 1 TO 4 OF SET
[DAP$K_ACCOMP_COMMAND]:
BEGIN
SELECT .NB[NDB$ACCFUNC] OF
SET
[DAP$K_OPEN,DAP$K_CREATE]: CLOSE(FB); !Close the file
TES;
IF .FOP[FB$DLC] THEN DELETE(FB); !Delete on close
DAP$PUT_STRING(DD[$],D_ACCOMP_RESP);
DAP$PUT_MESSAGE(DD[$]);
RETURN DAP$K_ACCOMP_COMMAND !We won & we're done
END;
[DAP$K_ACCOMP_RESPONSE]:
DAP_ERROR(DD[$],DAP$K_MAC_INVALID,DAP$K_ACCOMP_CMPFUNC);
!They're not supposed to send us this!!
[DAP$K_ACCOMP_PURGE]:
BEGIN
IF (FB NEQ 0) THEN RESETF(FAB);
DAP$PUT_STRING(DD[$],D_ACCOMP_RESP);
DAP$PUT_MESSAGE(DD[$]);
SIGNAL(DAP$_LINK_ABORT,DD[$]); !Remote system aborted transfer
RETURN DAP$K_ACCOMP_PURGE !They gave up on us
END;
[DAP$K_ACCOMP_EOS]:
BEGIN
DAP_ERROR(DD[$],DAP$K_MAC_UNSUPPORTED,
DAP$K_MIC_ACCOMP_CMPFUNC);
END;
[OUTRANGE]: BEGIN
DAP_ERROR(DD[$],DAP$K_MAC_INVALID,
DAP$K_MIC_ACCOMP_CMPFUNC);
END;
TES;
END; !DOACM
%FI !FTPASSIVE
END ELUDOM