Trailing-Edge
-
PDP-10 Archives
-
bb-k345a-sb
-
tcxkon.mac
There are 14 other files named tcxkon.mac in the archive. Click here to see a list.
TITLE TCXKON - TC10C DEVICE DEPENDENT CODE FOR TAPSER V2012
SUBTTL T.HESS/TAH/TW 22 AUG 78
SEARCH F,S
$RELOC
$HIGH
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1975,1976,1977,1978 BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
XP VTCXKN,2012 ;DEFINE VERSION NUMBER FOR STORAGE MAP
SALL
TCXKON:: ENTRY TCXKON
;DISPATCH TABLE FOR TAPSER CALLS
TCXDSP::
JRST TCXINI ;0 - INITIALIZE
JRST TCXRES ;1 - RESET ACTIVE I/O
JRST TCXSIO ;2 - START I/O
JRST TCXINT ;3 - DEVICE INTERUPT
POPJ P, ;4 - DX10 ONLY (DEVICE COMMAND)
JRST TCXIDL ;5 - KONTROLLER IS IDLE
JRST CPOPJ1## ;6 - TEST IF CTL ON-LINE
JRST TCXSCH ;7 - CAUSE A SCHEDULE CYCLE
;BYTE POINTERS
CTYUNI: POINT CI.UNS,T1,CI.UNP ;UNIT # IN STATUS REG
CTYFCN: POINT CI.CMS,T1,CI.CMP ;FCN CODE IN STATUS REG
;OFFSETS INTO TKBCCL
TKBUNI==TKBCCL##+2 ;CURRENT UNIT SELECTED (-1 IF NONE)
;DEFINITIONS FOR CONI/CONO STATUS REGISTER
;CONI BITS LH
CI.EOF==1B0 ;TAPE MARK SEEN
CI.EOT==1B1 ;END OF TAPE
CI.BOT==1B2 ;LOAD POINT
CI.FPT==1B3 ;FILE PROTECT (WRITE LOCK)
CI.HNG==1B4 ;XPORT HUNG
CI.REJ==1B5 ;COMMAND REJECT
CI.REW==1B6 ;TAPE REWINDING
CI.RCC==1B7 ;READ STATUS
CI.WCC==1B8 ;WRITE STATUS
CI.DPE==1B9 ;DATA PARITY ERROR
CI.CER==1B10 ;PE CORRECTED ERROR
CI.RCE==1B11 ;READ/COMPARE ERROR
CI.RLD==1B12 ;RECORD LENGTH DIFFERS
CI.OVR==1B13 ;DATA LATE (OVERRUN)
CI.CES==2 ;CHANNEL ERROR BYTE SIZE
CI.CEP==^D15 ;CHANNEL ERROR BYTE POSITION
CE.DPE==1 ;DATA PARITY ERROR
CE.CWE==2 ;CONTROL WORD PARITY ERROR
CE.NXM==3 ;NON-EXISTENT MEMORY
CI.RDY==1B17 ;UNIT READY
;CONI BITS RH
CI.UNS==3 ;UNIT # BYTE SIZE
CI.UNP==^D20 ;UNIT # BYTE POSITION
CI.CMS==5 ;COMMAND BYTE SIZE
CI.CMP==^D25 ;COMMAND BYTE POSITION
CM.FNO==00 ;NO-OP / CLEAR FORMATTER
CM.FUR==10 ;UNIT READY
CM.FRW==01 ;REWIND
CM.FUN==11 ;REWIND / UNLOAD
CM.FRD==02 ;READ FORWARD
CM.FR1==12 ;READ FORWARD TO EOF
CM.FRB==22 ;READ REVERSE
CM.FRC==03 ;READ / COMPARE FORWARD
CM.FR2==13 ;READ / COMPARE FORWARD TO EOF
CM.FBC==23 ;READ / COMPARE REVERSE
CM.FB1==33 ;READ / COMPARE REVERSE TO EOF
CM.FWR==04 ;WRITE
CM.FWL==14 ;WRITE AFTER LONG ERG
CM.FTM==05 ;WRITE TAPE MARK
CM.FLG==15 ;WRITE 3" BLANK TAPE
CM.FFB==06 ;SPACE FORWARD RECORD
CM.FFF==16 ;SPACE FORWARD FILE
CM.FBB==07 ;SPACE BACKWARD RECORD
CM.FBF==17 ;SPACE BACKWARD FILE
CI.CDS==1B26 ;CORE DUMP STATUS
CI.CWW==1B27 ;CONTROL WORD WRITTEN
CI.WEP==1B28 ;WRITE EVEN PARITY
CI.NRZ==1B29 ;PE/NRZI STATUS
CI.CKS==1B31 ;CHECK STATUS
CI.JBD==1B32 ;JOB DONE
CI.PIA==7 ;MASK FOR PIA
NOPMSK==701000 ;PRESERVE UNIT AND MODE
;CONO BITS
CO.UNS==CI.UNS ;UNIT # BYTE SIZE
CO.UNP==CI.UNP ;UNIT # BYTE POSITION
CO.CMS==CI.CMS ;COMMAND BYTE SIZE
CO.CMP==CI.CMP ;COMMAND BYTE POSITION
CO.CDM==1B26 ;CORE DUMP MODE
CO.WCW==1B27 ;WRITE CONTROL WORD
CO.WEP==1B28 ;WRITE EVEN PARITY
CO.GO==1B30 ;EXECUTE COMMAND
CO.LCR==1B31 ;LOAD COMMAND REGISTER
CO.JBD==1B32 ;JOB DONE
CO.PIA==7 ;MASK FOR PIA
;DATAO / DATAI BITS
DO.STP==1B21 ;ABORT CURRENT OPERATION
DI.IDB==1B17 ;PE ID BURST DETECTED
DI.CHS==3 ;CHAR CNT BYTE SIZE
DI.CHP==^D20 ;CHAR CNT BYTE POSITION
;COUNTER FOR WAIT AT TCXSIO
MTWTTM==4000
SUBTTL TAPE INTERUPT SERVICE
;CALLED FROM TAPSER WITH W := KDB
TCXINT: XCT TTCCIS##(W) ;GET STATUS REGISTER
MOVE T2,T1 ;GET COPY
ANDI T2,76017 ;GET BITS OF INTEREST
CAIN T2,CI.JBD+TAPCHN## ;CHECK FOR IDLE INTERUPT
JRST [PUSHJ P,CKSTRT ;CHECK IF STARTED
POPJ P, ;NOT STARTED - RETURN
JRST .+1]
LDB T2,CTYUNI ;GET UNIT SELECTED
PUSHJ P,SETUDB## ;SET UP U
JRST SETM1 ;NON-EX UNIT
XCT TTCCIS##(W) ;GET STATUS AGAIN
MOVEM T1,TTCFCS##(U) ;SAVE IN UDB
LDB T2,CTYFCN ;GET FCN
CAIE T2,CM.FUR ;UNIT READY?
CAIN T2,CM.FNO ; OR NO-OP
JRST TCXSEL ;YES - START I/O IF OK
PUSHJ P,CHKIRB## ;GET IORB
JRST TAPDIS## ;NONE - DISMISS INT.
MOVE T3,TTCFCS##(U) ;GET STATUS IN T3
MOVSI T2,TUSBOT## ;CLEAR BOT INDICATION
ANDCAM T2,TUBSTS##(U) ; WE WILL SET IT AGAIN IF NECESSARY
LDB T2,PRBFCN## ;GET DESIRED FCN
CAILE T2,TCIMAX ;CHECK VALIDITY
JRST TAPIFI## ;ILLEGAL TRANSFER VECTOR
JRST @TCIDSP(T2) ;DO IT
TCIDSP: TAPIFI## ;0 - ILLEGAL
TCIRD ;1 - READ
TCIWT ;2 - WRITE
TAPIFI## ;3 - READ BACKWARDS (ILLEGAL)
TCISR ;4 - SKIP RECORD
TCIBR ;5 - BACKSPACE RECORD
TAPIFI## ;6 - SKIP FILE
TAPIFI## ;7 - BACKSPACE FILE
TCIEG ;10 - ERASE GAP
TAPIFI## ;11 - DSE (ILLEGAL)
TCIRW ;12 - REWIND
TCIUN ;13 - REWIND / UNLOAD
TCITM ;14 - WRITE TAPE MARK
TAPIFI## ;15 - ILLEGAL
TCIRD ;16 - CORRECTION READ
TCIRD ;17 - READ LOW THRESHOLD
TCIMAX==.-TCIDSP-1
;HERE TO CHECK FOR IDLE STATUS INTERUPT - SEE IF ALREADY STARTED
;C(T1) IS STATUS REGISTER - PRESERVED IF CHL STARTED
CKSTRT: MOVSI T2,TKSSTD##
TDNE T2,TKBSTS##(W) ;STARTED?
JRST CPOPJ1## ;YES - SKIP RETURN
LDB T2,CTYUNI ;GET UNIT #
PUSHJ P,SETUDB## ;SET UP U := UDB
JRST SETM1
XCT TTCCIS##(W) ;GET STATUS REG
MOVSI T2,TKSOFL##
TLNN T1,(CI.RDY!CI.REW) ;CHECK GOODNESS
IORM T2,TUBSTS##(U) ;UNIT WENT OFF-LINE!
PUSHJ P,CLRCTL ;CLR CTL
SETM1: MOVNI T1,1 ;CAUSE SCHEDULING
POPJ P, ;RETURN
;ROUTINE TO MAKE CONTROLLER IDLE
CLRCTL:
TCXIDL: PUSH P,T1 ;SAVE IORB
HLLZS TKBCSO##(W) ;NO MORE INTS
XCT TTCCIS##(W) ;GET CTL STATUS REG
ANDI T1,NOPMSK ;PRESERVE UNIT # ETC.
IORI T1,CO.LCR!CO.GO ;...
XCT TTCCOS##(W) ;DO NO-OP TO DRIVE W/ PIA=0
SETOM TKBUNI(W) ;NO UNIT SELECTED
PJRST TPOPJ## ;RETURN
;HERE TO RESET ACTIVE I/O
TCXRES: MOVEI T1,DO.STP ;STOP CURRENT COMMAND
XCT TTCDOS##(W) ;AND CLEAR CHL ICP
MOVSI T2,TKSSEL## ;SELECT BIT
HRRZ T1,TUBQUE##(U) ;GET HEAD OF Q
JUMPE T1,CLRCTL ;NONE - EXIT
TDNE T2,TKBSTS##(W) ;SELECTED?
PUSHJ P,ZAPEXL ;YES - FIX IOLIST
PJRST CLRCTL ;CLEAR WORLD & EXIT
;HERE AT SYSTEM STARTUP
TCXINI: PUSHJ P,CLRCTL ;CLEAR WORLD
POPJ P, ;RETURN
;ROUTINE TO CAUSE AN INTERUPT TO FORCE A SCHEDULE CYCLE
TCXSCH: HRRZ T1,TUBADR##(U) ;GET UNIT ADDRS
LSH T1,^D35-CO.UNP
IORI T1,<CM.FNO>B<CO.CMP>!CO.GO!CO.LCR+TAPCHN## ;DO NO-OP TO UNIT
MOVEI T2,CI.JBD ;ENABLE FOR JOB DONE
CONO PI,PIOFF## ;AVOID RACE
HRRM T2,TKBCSO##(W) ;...
XCT TTCCOS##(W) ;...
PJRST ONPOPJ## ;EXIT
SUBTTL START I/O
;ROUTINE TO START I/O
;USER JOB MUST BE NAILED DOWN - CAUSE SELECTION INTERUPT
;OR JUST START I/O IF UNIT ALREADY SELECTED
TCXSIO: LDB T3,PRBFCN## ;GET FCN
MOVEI T2,<CM.FUR>B<CO.CMP> ;ASSUME UNIT READY WANTED
MOVSI T1,TKSOFL## ;BETTER SEND NO-OP IF UNIT
TDNN T1,TUBSTS##(U) ; WAS DISCOVERED OFF-LINE
CAIN T3,RB.FYB ;JUST WANT STATUS?
JRST [MOVEI T2,<CM.FNO>B<CO.CMP> ;YES - USE NO-OP
SETOM TKBUNI(W) ;CLEAR SELECTED UNIT
JRST .+1]
HLRZ T1,TUBAKA##(U) ;GET UNIT ADDRS DESIRED
CAMN T1,TKBUNI(W) ;SELECT OR START?
JRST TMSTRT ;START IT
LSH T1,^D35-CO.UNP ;PUT IN PROPER PLACE
IORI T1,CO.GO!CO.LCR+TAPCHN##(T2) ;INT ON UNIT READY OR NOOP
MOVE T2,TTCCIS##(W) ;GET CONI FOR TU'S KONTROLLER
TLO T2,(CONSO 0) ;CHANGE TO CONSO
HRRI T2,CI.JBD ;JOB DONE BIT
MOVEI T3,MTWTTM ;UPPER LIMIT WAIT COUNTER
XCT T2 ;DONE YET
SOJG T3,.-1 ;WAIT SOME MORE
MOVEI T2,CI.JBD ;THIS SHOULD COME UP
CONO PI,PIOFF## ;AVOID RACE
HRRM T2,TKBCSO##(W) ;SET IN CONSO
XCT TTCCOS##(W) ;SELECT UNIT
PJRST ONPOPJ## ;WAIT FOR INT
;HERE TO START AN ALREADY SELECTED UNIT
TMSTRT: XCT TTCCIS##(W) ;GET CTL STATUS
MOVEM T1,TTCFCS##(U) ;SAVE IN UDB
;;; FALL INTO TCXSEL
;HERE WHEN DESIRED DRIVE HAS BEEN SELECTED
;CHECK FOR ERRORS AND UNIT IDLE
TCXSEL: PUSHJ P,CHKIRB## ;GET IORB
JRST TAPDIS## ;NONE
MOVSI T2,TKSOFL## ;CHECK IF OFF-LINE
TDNE T2,TUBSTS##(U) ;...
JRST TCXOFL ;YES - TELL UPPER LEVEL
MOVE T3,TTCFCS##(U) ;GET STATUS REG
MOVSI T4,TUSWTL## ;WRITE LOCKED BIT
MOVE T2,[ANDCAM T4,TUBSTS##(U)]
TLNE T3,(CI.FPT) ;WRITE LOCKED?
MOVE T2,[IORM T4,TUBSTS##(U)] ;YES - CORRECT INSTR
XCT T2 ;SET/CLEAR BIT
LDB T2,PRBFCN## ;SEE WHAT FCN
CAIN T2,RB.FYB ;STATUS CHECK?
JRST TCXSTS ;YES - GO HANDLE
TLNE T3,(CI.HNG!CI.REJ!<CE.NXM>B<CI.CEP>)
JRST TCXOFL ;UNIT OFFLINE
PUSH P,T1 ;SAVE IORB PNTR
HRRZ T1,TKBICP##(W) ;SET UP ICPC
XCT TTCDOS##(W) ;...
POP P,T1 ;RESTORE IORB PNTR
PUSHJ P,SETCMD ;SET UNIT,PAR,DENS,COMPAT,FCN
PJRST TCIDON ;WRITE LOCKED
MOVEI T1,CO.GO!CO.LCR+TAPCHN##(T2) ;ADD PIA & MOVE TO T1
MOVEI T2,CI.JBD
CONO PI,PIOFF## ;SAVE US FROM OTHERS
HRRM T2,TKBCSO##(W) ;SET UP INT MASK
XCT TTCCOS##(W) ;START DEVICE
CONO PI,PION## ;OK NOW
NXTINT: MOVEI T1,0 ;MORE INTS COMING
POPJ P, ;EXIT THIS INT
;HERE TO GET UNIT STATUS UPDATE ON REQUEST
TCXSTS: TLNE T3,(CI.HNG) ;IF HUNG?
JRST TCXOFL ;MUST BE OFF-LINE
TLNN T3,(CI.RDY) ;UNIT READY?
JRST TCIDON ;NO - DISMISS
TLNN T3,(CI.BOT) ;AT LOAD POINT?
TLNN T3,(CI.REW) ;OR NOT REW'D
PUSHJ P,REWDON## ;YES - SET BOT / CLR REW
PJRST TCIDON ;EXIT INTERUPT
;HERE IF NO STATUS WORTH REMEMBERING
TCXOFL: MOVSI T2,RB.SOL ;SET OFF-LINE STATUS
IORM T2,TRBSTS(T1)
MOVSI T2,TKSOFL## ;CLEAR BIT IN UDB
ANDCAM T2,TUBSTS##(U)
PUSHJ P,CLRCTL ;RESET CTL
PJRST TCIDON ;AND RETURN
SUBTTL COMMAND SETUP
;ROUTINE TO SET UP CMD
;T1 := IORB FOR THIS REQUEST
;T3 CONTAINS CONI MTS, - DESTROYED
;T2 := COMMAND FOR CTL ON EXIT
SETCMD: LDB T4,PRBFCN## ;GET DESIRED FCN
SKIPN T2,IOFTAB(T4) ;CHECK LEGAL
JRST SETILG ;NOPE - ERROR
TLNE T2,(WRTOP) ;WRITING?
JRST SETCMW ;YES - CHECK WRITE-LOCKED
TLNE T2,(REWOP) ;REWINDING?
JRST CHKBOT ;YES - CHECK BOT
SETCM1: HLRZ T2,TUBAKA##(U) ;UNIT ADDRS
LSH T2,^D35-CO.UNP ;WHERE IT WILL DO THE MOST GOOD
IOR T2,IOFTAB(T4) ;GET FCN CODE
TLZ T2,(REWOP!WRTOP) ;CLEAR UNWANTED BITS
HRRZ T4,TRBXCW(T1) ;GET DATA ADDRS OR SPACING COUNT
TLZE T2,(DATOP) ;DATA?
JRST [PUSHJ P,SETCBX ;DO CTL SPECIFIC SETUP
JRST SETCM2] ;PROCEED
TLZN T2,(SPCOP) ;SPACING OP?
JRST [MOVEI T4,0 ;NO - ILLEGAL DATA REQUEST
JRST SETCM2] ;SET IN CHL AREA
MOVNI T4,-1(T4) ;GET COUNT -1 NEGATED
SKIPN T4
SETO T4,
IFN FT22BIT,<
HRRZ T3,TKBCDB##(W) ;CHECK DF10C CHL
SKIPGE CHB22B##(T3)
LSH T4,4 ;ONLY 14 BITS OF INFO
>
HRLZM T4,TKBCCL##(W) ;SAVE IN CHL PGM AREA
HRRZI T4,TKBCCL##(W) ;SET ADDRS
SETZM TKBCCL##+1(W) ;CHL HALT FOR DF10
SETCM2: MOVEM T4,@TKBICP##(W) ;PUT IN CORRECT PLACE
LDB T4,PRBMOD## ;GET DESIRED MODE
CAIN T4,RB.MCD ;CORE-DUMP?
IORI T2,CO.CDM ;YES - SET BIT
MOVEI T4,RB.D16 ;1600 BPI
DPB T4,PRBDEN## ;CORRECT DENSITY
PJRST CPOPJ1## ;GIVE GOOD RETURN
;SET IMPROPER MODE AND RETURN
SETILG: MOVSI T2,RB.SIL!RB.SER ;ILLEGAL OP
IORM T2,TRBSTS(T1) ;SET IN IORB
POPJ P, ;ERROR RETURN
;HERE IF WRITING - CHECK WRLK
SETCMW: TLNN T3,(CI.FPT) ;WRITE LOCKED?
JRST SETCM1 ;NO - PROCEED
MOVSI T2,RB.SLK!RB.SER ;AND IN IORB
IORM T2,TRBSTS(T1) ;...
POPJ P, ;ERROR RETURN
;ROUTINE TO SETUP CMD LIST TERMINATION WORD FOR DF10
;T4 := ADDRS OF CHL PGM
SETCBX: HLRZ T3,TRBEXL(T1) ;END OF XFER LIST
HRLI T3,TKBCCL##(W) ;HANDY ZERO
HLRZM T3,0(T3) ;CHL JUMP TO ZERO
SETZM TKBCCL##(W) ;GRNTEE ZERO
POPJ P, ;RETURN
;HERE TO CHECK ALREADY AT BOT - SUPPRESS REWIND
CHKBOT: TLNE T3,(CI.BOT) ;LOAD POINT?
PJRST REWDON## ;YES - NO NEED TO REWIND
JRST SETCM1 ;NO - START REWIND
;TABLE FOR I/O FUNCTIONS - ALREADY IN POSITION
DEFINE IOT(CMD,FLGS) <
FLGS+<CMD>B<CO.CMP>
>
DATOP==1B0 ;DATA XFER OPERATION
SPCOP==1B1 ;SPACING OPERATION
WRTOP==1B2 ;WRTITE OPERATION
REWOP==1B3 ;REWIND OPERATION
IOFTAB: 0 ;0 - ILLEGAL
IOT(CM.FRD,DATOP) ;1 - READ
IOT(CM.FWR,DATOP!WRTOP) ;2 - WRITE
0 ;3 - ILLEGAL
IOT(CM.FFB,SPCOP) ;4 - FORWARD SPACE BLOCK
IOT(CM.FBB,SPCOP) ;5 - BACKWARD SPACE BLOCK
IOT(CM.FFF,0) ;6 - FORWARD SPACE FILE
IOT(CM.FBF,0) ;7 - BACKSPACE FILE
IOT(CM.FLG,WRTOP) ;10 - WRITE LONG GAP
0 ;11 - ILLEGAL
IOT(CM.FRW,REWOP) ;12 - REWIND
IOT(CM.FUN,0) ;13 - REWIND / UNLOAD
IOT(CM.FTM,WRTOP) ;14 - WRITE TAPE MARK
0 ;15 - ILLEGAL
IOT(CM.FRD,DATOP) ;16 - CORRECTION READ
IOT(CM.FRD,DATOP) ;17 - READ LOW THRESHOLD
SUBTTL READ
;HERE ON DONE INTERUPT FOR READ
TCIRD: PUSHJ P,TCCKMV ;SEE IF TAPE MOVED
JSP T4,TCERD0 ;NO - PROBS
PUSHJ P,CHRCT ;GET CHARACTER COUNT
JRST [MOVSI T4,RB.STL
IORM T4,TRBSTS(T1)
JRST .+1]
MOVEM T2,TRBRCT(T1) ;SAVE COUNT IN IORB
MOVE T3,TTCFCS##(U) ;RESTORE STATUS
TLNE T3,(<CE.NXM>B<CI.CEP>) ;CHL ERRORS?
JRST TCECHN ;YES - HANDLE
PUSHJ P,TCSTM ;ENCOUNTER EOF?
JRST TCIRD1 ;NO - GO ON
AOS TUBFIL##(U) ;PLUS 1 MORE FILE
TCIRD1: TRNE T3,CI.CKS ;CHECK BADNESS
JSP T4,TCERD1 ;ERROR - HANDLE
MOVE T2,TRBRCT(T1) ;GET CHAR COUNT FOR THIS RECORD
ADDM T2,TUBCRD##(U) ;AND UPDATE STATISTICS
;HERE TO FINISH INTERUPT AND EXIT TO TAPSER
TCIDON: PUSHJ P,ZAPEXL ;CLEAN UP
HLRZ T3,TUBAKA##(U) ;GET LAST UNIT REF'D
MOVEM T3,TKBUNI(W) ;AND SAVE IT FOR LATER CHECK
HLRZ T3,TRBSTS(T1) ;LOOK AT FLAGS
JUMPE T3,CPOPJ## ;RETURN IF NONE
MOVSI T2,RB.EXC ;ELSE SET EXCEPTION
IORM T2,TRBLNK(T1) ;IN IORB
POPJ P, ;AND RETURN
;ROUTINE TO FIXUP DF10 XFER LIST
ZAPEXL: HLRZ T2,TRBEXL(T1) ;PNTR TO END OF XFER LIST
JUMPE T2,CPOPJ## ;RETURN IF NONE
SETZM 0(T2) ;CLEAR IT
POPJ P, ;RETURN
SUBTTL WRITE
;HERE ON DONE INTERUPT FOR WRITE
TCIWT: PUSHJ P,TCCKMV ;DID IT MOVE
JSP T4,TCEWT0 ;NO - TRY TO FIX
TLNE T3,(<CE.NXM>B<CI.CEP>) ;CHL ERROR?
JRST TCECHN ;YES - LOOK AT THAT
MOVSI T2,RB.SET ;NOW CHECK EOT
TLNE T3,(CI.EOT) ;???
IORM T2,TRBSTS(T1) ;SET INFO IN IORB
TRNE T3,CI.CKS ;EVERYTHING OK?
JSP T4,TCEWT1 ;NO - TRY TO FIX
PUSHJ P,CHRCT ;GET CHARACTER COUNT
JFCL ;DON'T CARE
ADDM T2,TUBCWR##(U) ;ADD TO STATS
PJRST TCIDON ;AND EXIT
;HERE ON DONE INTERUPT FOR WRITE TAPE MARK
TCITM: MOVSI T2,RB.SET ;JUST IN CASE
TLNE T3,(CI.EOT) ;WE SAW A TI
IORM T2,TRBSTS(T1) ;SET FLG IF SEEN
TRNE T3,CI.CKS ;ANYTHING WRONG?
JSP T4,TCEWT1 ;YES - SORRY
SETZM TUBREC##(U) ;ZEROTH RECORD
AOS TUBFIL##(U) ;AND 1 MORE FILE
PJRST TCIDON ;EXIT
;ROUTINE SET SAY WE'VE SEEN A TAPE MARK
;ALSO RESETS RECORD COUNTER
TCSTM: TLNN T3,(CI.EOF) ;SEEN EOF?
POPJ P, ;NO - RETURN
MOVSI T2,RB.STM ;IORB FLAG ALSO
IORM T2,TRBSTS(T1) ;...
SETZM TUBREC##(U) ;CLEAR RECORD COUNT
PJRST CPOPJ1## ;SKIP RETURN FOR FURTHER PROCESSING
SUBTTL REWIND/UNLOAD/BACKSPACE RECORD
;HERE ON INTERUPT AFTER STARTING REWIND
TCIRW: TLNE T3,(CI.HNG!CI.REJ) ;CHECK BADNESS
JSP T4,TCERW ;HANDLE PROBLEM
TCIUN: MOVSI T2,TUSREW## ;SAY WE ARE REWINDING
IORM T2,TUBSTS##(U) ;...
TLNE T3,(CI.BOT) ;ALREADY DONE?
PUSHJ P,REWDON## ;YES - CLEAN UP THEN
SETZM TUBREC##(U) ;IN CASE WE DON'T FINISH
SETZM TUBFIL##(U) ;CLEAR THESE NOW
PJRST TCIDON ;AND EXIT
;HERE ON DONE INTERUPT FROM BACKSPACE RECORD
TCIBR: TLNE T3,(CI.HNG!<CE.NXM>B<CI.CEP>) ;DEVICE PROBS?
JSP T4,TCERD1 ;WHOOPS PROBLEM
PUSHJ P,TCSTM ;LOOK FOR TM
JRST TCIBR1 ;NONE SEEN
SOS TUBFIL##(U) ;ONE LESS FILE
TCIBR1: SOS TUBREC##(U) ;ALSO ONE LESS RECORD
TLNN T3,(CI.BOT) ;SEE IF WE CRASHED INTO BOT
PJRST TCIDON ;NO - DONE
MOVSI T2,RB.SBT!RB.SNM ;YES - LITE BITS
SKIPN TUBREC##(U) ;TRY TO GUESS IF TAPE MOVED
SKIPE TUBFIL##(U) ; BY SEEING IF AT LOGICAL BOT
TLZ T2,RB.SNM ;FIRST TIME HERE
IORM T2,TRBSTS(T1) ;SET RESULT IN IORB
MOVSI T2,TUSBOT## ;AND UDB
IORM T2,TUBSTS##(U) ;...
SETZM TUBREC##(U) ;GET THINGS RIGHT
SETZM TUBFIL##(U)
PJRST TCIDON ;EXIT
SUBTTL SKIP RECORD/ERASE GAP
;HERE ON DONE INTERUPT FROM SKIP FORWARD RECORD
TCISR: PUSHJ P,TCCKMV ;SEE IF WE MOVED?
JSP T4,TCERD0 ;NOPE
TRNE T3,CI.CKS ;CHECK ERRORS
JSP T4,TCERD1 ;HANDLE IT
PUSHJ P,TCSTM ;CHECK FOR TAPE MARK
JRST TCIDON ;NO TAPE MARK
AOS TUBFIL##(U) ;INCR FILE COUNTER
JRST TCIDON ;AND EXIT
;HERE ON DONE INTERUPT FROM ERASE GAP
TCIEG: MOVSI T2,RB.SET ;IN CASE TAPE INDICATE
TLNE T3,(CI.EOT) ;SEEN ONE?
IORM T2,TRBSTS(T1) ;YES - SET BIT
TLNE T3,(CI.HNG!CI.REJ!<CE.NXM>B<CI.CEP>) ;ERROR ALLOWED
JRST TCEWT1 ;YES - TREAT IT
PJRST TCIDON ;EXIT INT
SUBTTL ERROR PROCEDURES
;HERE FOR CHANNEL ERROR
TCECHN: PUSHJ P,SAVE1## ;SAVE P1
MOVEI T2,CHNNXM## ;ASSUME NXM
TLC T3,(<CE.NXM>B<CI.CEP>) ;COMPLEMENT BITS
TLCE T3,(<CE.NXM>B<CI.CEP>) ;NXM IF BOTH ON!
MOVEI T2,CHNMPE## ;ELSE PARITY ERROR
PUSH P,T1 ;SAVE IORB
HRRZ T1,TKBICP##(W) ;PNTR TO CCW
HRRZ P1,TKBCDB##(W) ;PNTR TO CHL DATA BLOCK
PUSHJ P,0(T2) ;CALL ROUTINE
POP P,T1 ;RESTORE IORB PNTR
MOVSI T2,RB.SER!RB.SED
IORM T2,TRBSTS(T1) ;SET BITS
PJRST TCIDON ;RETURN
;ROUTINE TO DETERMINE IF TAPE MOVED (DIVINATION)
TCCKMV: TLNE T3,(CI.HNG!CI.REJ)
POPJ P, ;TRY THIS FOR NOW
AOS TUBREC##(U) ;MOVIN' ALONG
JRST CPOPJ1## ;SKIP RETURN
;ERRORS DETECTED DURING WRITE OPERATIONS
TCEWT0: MOVSI T2,RB.SNM!RB.SED ;TAPE DIDN'T MOVE
IORM T2,TRBSTS(T1)
TCEWT1: PUSHJ P,TCEANL ;ANALYSE ERROR
MOVSI T2,RB.SLK ;CHECK FOR WRITE LOCK
TLNE T3,(CI.FPT)
IORM T2,TRBSTS(T1) ;YES - SET BIT
PJRST TCIDON ;EXIT INTERUPT
;ERRORS DETECTED DURING READ / SPACING OPS
TCERD0: MOVSI T2,RB.SNM!RB.SED ;TAPE DIDN'T MOVE
IORM T2,TRBSTS(T1)
TCERD1: PUSHJ P,TCEANL ;ERROR ANALYSIS
PJRST TCIDON ;EXIT INT
;PROBLEM STARTING REWIND
TCERW: MOVSI T2,RB.SED!RB.SNM!RB.SOL
IORM T2,TRBSTS(T1) ;SET OFF-LINE ETC.
PUSHJ P,CLRCTL ;RESET CTL
PJRST TCIDON ;EXIT INT
;ROUTINE TO ANALYSE ERROR BITS IN RH(T3)
TCEANL: MOVEI T2,0 ;SET INITIAL ZERO
TLNE T3,(CI.HNG)
JRST TCEOFL ;DRIVE OFF-LINE
TLNE T3,(CI.REJ)
JRST TCECMR ;COMMAND REJECT
TLNE T3,(CI.OVR)
JRST TCEOVR ;OVERRUN
TLNE T3,(CI.DPE!CI.RCE)
JRST TCEDC ;DATA CHECK
TCEXIT: IORM T2,TRBSTS(T1) ;SET SELECTED BITS
POPJ P, ;RETURN
TCEOFL: PUSHJ P,TCXOFL ;SET UNIT OFF-LINE
TCECMR: MOVSI T2,RB.SNM!RB.SED ;SET BITS (TAPE DIDN'T MOVE)
PJRST TCEXIT
TCEDC: TLO T2,RB.SDE ;DATA ERROR
TCEOVR: TLO T2,RB.SED ;ERROR DETECTED - RETRY
PJRST TCEXIT
SUBTTL COMPUTE CHARACTER COUNTS
;ROUTINE COMPUTES CHARACTER COUNT
;RETURNS COUNT IN T2 , T1 SAVED
;CALLED WITH C(T3) := CONI MTS,
CHRCT: PUSH P,T1 ;SAVE IORB PNTR
PUSHJ P,WRDCTB ;GET WORDCOUNT
SKIPA ;LENGTH ERROR RETURN
AOS -1(P) ;SET FOR SKIP RETURN
MOVEI T2,-1(T1) ;WORD COUNT -1 INTO T2
XCT TTCDIS##(W) ;GET BYTE RESIDUE
LDB T4,[POINT DI.CHS,T1,DI.CHP]
JUMPE T4,[AOJA T2,CHRCT1] ;IF ZERO RE-ADJUST WORD COUNT
TRCE T4,5 ;ELSE EXCHANGE HIGH & LOW ORDER BITS
TRCE T4,5 ;...
TRC T4,5 ;BYTE RESIDUE NOW IN T4
CHRCT1: DPB T4,PMTNCR## ;SAVE RESIDUE FOR MTCHR.
HRLM T2,TUBCHR##(U) ;STORE LAST WORD COUNT FOR MTCHR.
XCT TTCCIS##(W) ; SEE WHAT MODE
MOVEI T3,5 ;ASSUME CORE-DUMP
TRNN T1,CI.CDS ;IS IT?
MOVEI T3,4 ;NO - COMPAT THEN
IMUL T2,T3 ;CONVERT TO BYTES
ADD T2,T4 ;PLUS REMAINDER
MOVEI T1,0 ;CAN'T GET CRC
DPB T1,PMTCRC## ;STORE IT FOR MTCHR.
PJRST TPOPJ## ;RESTORE T1 AND EXIT
;ROUTINE TO COMPUTE WORD COUNT FOR DF10
;RETURNS WORD COUNT IN T1 , T3 PRESERVE
;CALLED WITH T1 := IORB
WRDCTB: MOVE T1,TKBICP##(W) ;PNTR TO INITIAL CONTROL WORD
IFN FT22BIT,<
PUSHJ P,SAVE1## ;SAVE P1
MOVE P1,TKBCDB##(W) ;ADDRS OF CDB
>
PUSH P,T3 ;SAVE T3
PUSHJ P,WRDCNT## ;CALL ROUTINE IN COMMON
POP P,T3 ;RESTORE T3
TLNN T3,(CI.RLD) ;LENGTH = REQUEST?
JRST CPOPJ1## ;OK - GIVE GOOD RETURN
MOVE T2,TKBICP##(W) ;ICPC PNTR
HLRZ T2,1(T2) ;LH TERMINATION WORD
IFN FT22BIT,<
SKIPGE CHB22B##(P1) ;SKIP IF DF10
LSH T2,-4 ;DF10C HAS 14 BIT ADDRS
>
SKIPN (T2) ;ARE WE AT END OF LIST
POPJ P, ;YES - SHORT RECORDS OK
SOJA T1,CPOPJ1## ;NO - LENGTH IS ONE LESS
END