Trailing-Edge
-
PDP-10 Archives
-
bb-jr93e-bb
-
7,6/ap018/galcnf.x18
There is 1 other file named galcnf.x18 in the archive. Click here to see a list.
SUBTTL GALCNF Created by GALGEN Version 5(2122) at 6-Jan-88 9:43:40
UNIVERSAL GALCNF
.DIRECT .NOBIN
DEFINE XP (SYM,VAL) <
SYM==:VAL>
G.%GLN==500002122 ;STANDARD VERSION FOR GALGEN
G.GVER==5 ;GALAXY VERSION NUMBER
RADIX 5+5
FTUUOS==-1 ;-1 IF TOPS 10 ELSE 0
FTJSYS==0 ;-1 IF TOPS 20 ELSE 0
;
; In the following dialog, all questions are of the form:
;
; text of question (list or range of answers) [default answer]
;
; The line starts with the actual text of the question. Following
; the question is a description of the possible answers enclosed
; in parentheses. This description might be a range of numbers, a
; list of keywords, or a textual description. Following this
; description is the default answer, enclosed in square brackets.
; The default will be assumed if you only press the RETURN key.
;
; You have the choice of carrying on a LONG dialog in which an
; explanation of each question is provided automatically, or a
; SHORT dialog in which it is assumed that you are familiar with
; the GALAXY generation procedure. In either case, you can always
; obtain the help text by typing a question mark (?) in response
; to any question.
;
;
; Answer the following question with either LONG (for a long
; dialog) or SHORT (for a short one). Simply pressing the RETURN
; key will imply SHORT.
;
;Dialog Length (SHORT,LONG) [SHORT] ;Dialog length
SUBTTL Administrative Controls and Parameters
; Administrative Controls and Parameters
; -------------- -------- --- ----------
;
XP G.OLOG,-1
;Operator log filename (3-6 Characters) [OPERAT] ;Operator log file name
DEFINE G$$LGN < X OPERAT>
;Do you want redundant master queue file (YES,NO) [NO] ;Redundant master queue file
XP FTRQUE,0
;File structure to use for master queue (3-6 Characters) [SSL] ;Master queue file structure
XP G.QSTR,'SSL '
;Maximum priority non-privileged users may specify (1-63) [20] ;Maximum priority for non-privileged users
XP G.SPRI,20
;Default for /PRIORITY on batch and spooling requests (1-63) [10] ;Default priority
XP G.DPRI,10
SUBTTL [SYSTEM]INFO Parameters
; [SYSTEM]INFO Parameters
; ------------ ----------
;
XP FTINFO,-1 ;Enable [SYSTEM]INFO support
;Maximum length of a PID name (29-79 Characters) [39] ;Maximum length of PID name
XP SZ.INF,39
SUBTTL Applications
; Applications
; ------------
;
;Do you wish to run optional applications? (YES,NO) [YES] YES ;Optional Applications
;Include the LAT Control Protocol (LCP) commands? (YES,NO) [YES] YES ;Yes, we want LCP
;Include the DECnet Network Control Protocol (NCP) commands? (YES,NO) [YES] YES ;Yes, we want NCP
;Do you wish to run any installation-developed applications? (YES,NO) [NO] NO ;No installation-developed applications
DEFINE G$$ATB <
X <CATALOG>,0,CATTAB,
X <CONFIG>,1,CNFTAB,CNFORN
X <LCP>,2,LCPTAB,LCPORN
X <NCP>,3,NCPTAB,
X <QUOTA>,4,QUOTAB,
> ; END OF G$$ATB
SUBTTL Batch Job Defaults
; Batch Job Defaults
; ----- --- --------
;
;Default batch job runtime limit (5-9999 seconds) [300] ;Default batch job runtime
XP G.ITIM,300
;Line printer output limit (0-9999 pages) [200] ;Default spooled LPT limit
XP G.ILPT,200
;Card punch output limit (0-9999 cards) [1000] ;Default spooled CDP limit
XP G.ICDP,1000
;Paper tape punch output limit (0-5000 feet) [200] ;Default spooled PTP limit
XP G.IPTP,200
;Plotter output limit (0-5000 minutes) [30] ;Default spooled PLT limit
XP G.IPLT,30
;Default for SUBMIT/OUTPUT (LOG,NOLOG,ERROR) [LOG] ;Default /OUTPUT
XP G.ILOG,2
;Should memory limits be enforced (YES,NO) [YES] ;Core limit enforcement
;Memory limit (24-16384 pages) [512] ;Default core limit
XP G.ICOR,512 ;CORE LIMITS
SUBTTL Line Printer Defaults and Parameters
; Line Printer Defaults and Parameters
; ---- ------- -------- --- ----------
;
;Number of job banner pages (0-5) [2] ;Number of LPT banner pages
XP G.LBAN,2
;Number of job trailer pages (0-5) [2] ;Number of LPT trailer pages
XP G.LTRL,2
;Number of file header pages (0-5) [2] ;Number of LPT file header pages
XP G.LHDR,2
;Name for standard output forms (4-6 Characters) [NORMAL] ;Standard output forms name
XP G.DNOR,'NORMAL'
;Number of characters which uniquely identifies form (2-6) [4] ;Forms name uniqueness
XP G.DNUC,4
;Do you want to load any special printer drivers? (YES,NO) [NO] YES ;Special printer drivers
DEFINE G$$LPT <
LL LPTL01
LL LPTTTY
> ; End of G$$LPT
SUBTTL Parameters for MDA
; Parameters for MDA
; ---------- --- ---
;
;Enable deadlock avoidance? (YES,NO) [YES] YES ;MDA included
XP G.DEAD,-1 ;DEADLOCK AVOIDANCE
%TRK7==1 ; 7 TRACK
%TRK9==2 ; 9 TRACK
;Default tape label type (ANSI,BYPASS,IBM,USER-EOT,UNLABELED) [USER-EOT] ;Default magtape label type
XP DEFLBT,10
;Default 9-track tape density (200,556,800,1600,6250) [1600] ;Default 9-track magtape density
XP DEF9TK,4
;Default 7-track tape density (200,556,800) [800] ;Default 7-track magtape density
XP DEF7TK,3
;Default track type (7,9) [9] ;Default magtape track type
XP DEFTRK,%TRK9
;Allow bypassing for non-privileged users? (YES,NO) [NO] ;BYPASS labels allowed for un-privileged users
XP NPRTLB,0
SUBTTL Miscellaneous Defaults and Parameters
; Miscellaneous Defaults and Parameters
; ------------- -------- --- ----------
;
;Do you want the standard limit computation (YES,NO) [YES] ;Standard limit computation
XP G.LPTM,6
XP G.LPTD,8
XP G.CDPM,33
XP G.CDPD,4
XP G.PLTM,7
XP G.PLTD,100
XP G.PTPM,7
XP G.PTPD,4
;Default output-limit-exceeded action (ABORT,ASK,PROCEED) [ASK] ;Default output-limit-exceeded action
XP G.FLEA,2
;Default network-type for FAL streams (ANF-10,DECnet) [ANF-10] ;Default FAL stream network
XP G.FNTY,1
;Number of minutes "demand" spoolers tolerate idleness (5-60) [10] ;Use default number of minutes for idle spoolers
XP G.IMIN,10
XP FTDN60,-1 ;Always include DN60 support
XP FTFTS,0 ;No FTS support
XP FTDQS,0 ;No DQS support
XP FTRJE,0 ;No DN200 support
XP FTFACT,0 ;FACT file support off
;Do you wish to enter any site specific paramters? (YES,NO) [NO] YES ;We have site specific parameters
XP FTDQS,-1 ;Turn on DECnet printer service
END