Trailing-Edge
-
PDP-10 Archives
-
bb-jr93d-bb
-
7,6/ap016/queue.x16
There are 2 other files named queue.x16 in the archive. Click here to see a list.
IF2 <VTITLE \QUHVER,\QUHMIN,\QUHEDT,\QUHWHO>
SUBTTL Copyright and Version Information
;
; COPYRIGHT (c) 1975,1976,1977,1978,1979,1980,1981,1982,
; 1983,1984,1985,1986
; DIGITAL EQUIPMENT CORPORATION
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
;
SEARCH SCNMAC
SEARCH ORNMAC
SEARCH GLXMAC
SEARCH QSRMAC
SEARCH UUOSYM
.REQUE REL:SCAN ;SYSTEM COMMAND SCANNER
.REQUE REL:WILD ;COMMON FILE-SYSTEM MANIPULATOR
.REQUE REL:HELPER ;SYSTEM HELP TEXT TYPER
;Version Information
;
QUHVER==105 ;MAJOR VERSION
QUHMIN==0 ;MINOR VERSION
QUHWHO==0 ;WHO LAST PATCHED
QUHEDT==634 ;EDIT NUMBER
DEFINE VTITLE(VMA,VMI,VED,VWH),<
TITLE QUEUE - TOPS-10 Queue Entry and Change Program - CTKunkel - Version 'VMA'.'VMI'('VED')-'VWH'->
IF1 <VTITLE \QUHVER,\QUHMIN,\QUHEDT,\QUHWHO>
%%.QUH==VRSN.(QUH)
LOC 137
EXP %%.QUH
TWOSEG ;TWO SEGMENT PROGRAM
RELOC 400000 ;START IN HISEG
SALL ;SUPPRESS MACRO EXPANSIONS
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1971,1986.
ALL RIGHTS RESERVED.
\;END OF COPYRIGHT MACRO
SUBTTL Table of Contents
; Table of Contents for QUEUE
;
; SECTION PAGE
;
; 1. Copyright and Version Information......................... 1
; 2. Table of Contents......................................... 3
; 3. Revision History.......................................... 4
; 4. QUEUE AC'S and I/O Channel Definitions.................... 5
; 5. Symbols, Masks, and Flag Definitions...................... 6
; 6. Parameters and Defaults................................... 8
; 7. Data Macros............................................... 11
; 8. Message Macros............................................ 13
; 9. Device Macros............................................. 15
; 10. Entry and Initialization.................................. 16
; 11. Main Processing Loop...................................... 18
; 12. TSCAN Routine Calls...................................... 19
; 13. Command Scanning Default Routines......................... 22
; 14. Definition of Switch Accumulation Area and Default Values. 32
; 15. Default Switch Table Values............................... 33
; 16. File Scanning Error Messages.............................. 34
; 17. Other Error Messages...................................... 35
; 18. COMMND Command Processing................................. 36
; 19. NCREAT New CREATE Queue Request - Input or Output......... 38
; 20. CREATO New CREATE Output Queue Request.................... 39
; 21. CREATI New CREATE Input Queue Request..................... 43
; 22. CRESND New CREATE Message Send Routine.................... 47
; 23. NBLDEQ New Build EQ Block Routine (INP/OUT)............... 48
; 24. DOACCT Fill in the Accounting String...................... 49
; 25. NLKFIL New Wild-Card LOOKUP Routine, Writes GALAXY Bits... 50
; 26. ISBIN Check for Binary File Subroutine................... 58
; 27. NMODFY New MODIFY routine................................. 59
; 28. MODINP INPUT Specific Modification Routines............... 64
; 29. OUTPUT Specific Modification Routines..................... 66
; 30. GRPSTO Subroutine to Add a MODIFY Element to the Message.. 68
; 31. NKILL New KILL routine.................................... 69
; 32. NLIST New LIST Routines.................................. 70
; 33. NLSTBL Subroutine to Add Thing to LIST Message Block...... 74
; 34. LSTOPN Listing routines - Open the listing file........... 75
; 35. LSTMTA Listing routines - Type out listing filespec....... 76
; 36. LSTHDR Listing routines - Header generation............... 78
; 37. LSTTYO Listing routines - Output the list answer.......... 79
; 38. NDEFER New DEFER & ZDEFER Routine......................... 80
; 39. CMDXIT Return Routine..................................... 82
; 40. MSETUP Subroutine to Setup Temp and Message Areas......... 83
; 41. QUEFLS Subroutines to Flush the IPCF Receive Queue........ 84
; 42. GQPID Get the PID for QUASAR............................. 85
; 43. BLDACK Build ACK Code Subroutine.......................... 86
; 44. GETOBJ Subroutine to Convert Device to an Object Type..... 87
; 45. MSGSND Subroutine to Send a Message to QUASAR............. 88
; 46. RCVACK Subroutine to Receive an Expected "ACK" from QUASAR 89
; 47. MAKNAM Subroutine to Make Up the Packet to Send to INFO... 91
; 48. DFDEST and DFPROC Routines................................ 92
; 49. SETNOD Routine to Convert/Default a node Name/Number...... 93
; 50. GCORE Subroutine......................................... 94
; 51. General Subroutines....................................... 95
; 52. Command Scanning Subroutines.............................. 97
; 53. QUETYP Identify What Type of QUEUE Has Been Specified..... 101
; 54. XPNQUE Expand QUEUE Name Abbreviation If Any.............. 103
; 55. ACCTSW Scan ACCOUNT Switch Processing Routine............. 104
; 56. RDX60W Input Time Subroutines............................. 105
; 57. Fatal Error Message Routines.............................. 106
; 58. Non-fatal Error Message Routines.......................... 107
; 59. Storage Description....................................... 108
;
SUBTTL Revision History
;600 QUENCH/QMANGR are a bit crufty, old MPB bits,
; data formats, data structures, etc. Remove them
; and add direct GALAXY interface. Include
; /FONT and /GRAPHICS switches as part of the
; laser printer support. Do this creating
; new module QUEUE.MAC
; 15-Mar-85 /CTK
;
;601 Fix RDH SWITCH.INI file bug which clobbered
; the S.ATTRIB word on LIST commands. Rewrite
; the NLOKFL routine so we do varible length
; FP blocks, cut down on /FONT switch overhead,
; and rename NLOKFL to NLKFIL reflecting these
; changes. Remove .FPINF/I.MOD word symbol crocks.
; 23-MAR-85 /CTK
;
;602 Fix Non-Existant batch control file CSG error message.
; 29-MAR-85 GCO 10184 /CTK
;
;603 Fix /FONT switch bugs and /STREAM or /UNIT in SWITCH.INI
; on LIST command bug.
; 8-APR-84 GCO 10190 /CTK
;
;604 Make /BATLOG switch unique to one character.
; Make multiply request output creates work and
; give them all the same JOBNAME.
; 14-APR-85 GCO 101xx /CTK
;
;605 Move check for ACK code to after check for packet from IPCC,
; otherwise can't use debugging feature.
; 18-Apr-85 GCO 10193 /JAD
;
;606 Init /ACCOUNT: switch storage to -1, not 0, DOACCT assumes
; -1 means no account string supplied.
; 26-Apr-85 GCO 10200 /LWS
;
;607 Implement DQS support (internal use only).
; 4-Jun-85 GCO 10228 /JAD
;
;610 Bad AC in kill code prevents [1,2] job from killing requests.
; 13-Jun-85 GCO 10230 /DPM
;
;611 Finish rest of DQS support.
; 20-Jun-85 GCO 10236 /JAD
;
;612 Make QUEUE FOO/UNIT:LN01 work.
; *** NOTE ***
; Neither QUASAR nor QUEUE perform any validity checks
; on the new unit class quantity. This enables a customer
; to write a spooler which passes the unit class info to
; QUASAR with no modifications necessary to any part of
; QUASAR or QUEUE.
; 1-JUL-85 GCO 10240 /DPM
;
;613 Fix handling of /UNIT: for DQS printer.
; 9-Jul-85 GCO 102xx /JAD
;
;614 Fix misleading messages beginning with "QMRxxx". Remove
; TTYCHR and TTYSTR macros and use OUTCHR/OUTSTR or N$xxxx
; where appropriate.
; 16-Jul-85 GCO 10252 /JAD
;
;615 Fix .PRI LPTnnn: commands, QUEUE would HIBER.
; 18-Jul-85 GCO 10253 /CTK
;
;616 Fix /NULL stack phase error.
; 18-Jul-85 GCO 10254 /JAD
;
;617 Allow core limits larger than 256K.
; 22-Jul-85 GCO 10259 /DPM
;
;620 Add DMS (1022 database) and FIN ("FINE" editor buffer file)
; to the binary extension table.
; 14-Nov-85 GCO 10327 /DPM
;
;621 We do not handle the "PRINT REL:FILE.EXT[,,EXAMPLE]"
; command. When an ERSATZ device is part of the file spec
; QUEUE can not find any SFD's on it.
; SPR 10-34921 GCO 10126 3-DEC-84/CTK
;
;622 QUEUE/DEFER doesn't work.
; 13-Jan-86 GCO 10356 /DPM
;
;623 Make USERNAME an 8-bit ASCII field.
; 13-Feb-86 GCO 10377 /NT
;
;624 Get the log file in the right place if the device was not
; explicitly specified.
; 17-Apr-86 GCO 10397 /JAD
;
;625 Remove old DQS support and replace with NQC equivalents.
; Code still under the FTDQS feature test.
; 17-Jun-86 GCO 10418 /JAD
;
;626 Queue name string should be 8-bit ASCII.
; 18-Jun-86 GCO 10420 /JAD
;
;627 Force queue name to be upper case ASCII.
; 2-Jul-86 GCO 10435 /JAD
;
;630 Pass forms type string in 7-bit ASCII to match characteristics.
; 14-Jul-86 GCO 10439 /JAD
;
;631 Change NLK.ER to use FILOP. function .FOFIL to return ALL the
; information about where the log file went. Always try doing
; an ENTER if a LOOKUP of the purported log file fails. Also
; some clean-up here and there.
; 18-Jul-86 GCO 10444 /JAD
;
;632 Teach QUEUE to look on CTL: for control files if no device
; was given and the specified file doesn't exist on disk. If
; the user gives a /NEW switch, then never check CTL and assume
; they know what they're doing.
; 23-Jul-86 GCO 104xx /DPM
;
;633 If first component of a multiple field /TIME: switch argument
; is greater than 60 QUEUE leaves the ":" as the next token for
; .SCAN to stumble over. Check for invalid terminator and give
; an error instead. Also limit time field to 18 bits (size of
; the limit word in the EQ).
; 7-Aug-86 GCO 10451 /JAD
;
;634 Re-enter lost GCO 10395 to correct problems with receives of
; large packets by reserving the maximum amount of storage for
; a large packet.
; 16-Dec-86 GCO 10477 /JJF
SUBTTL QUEUE AC'S and I/O Channel Definitions
TF==0
T1==1
T2==2
T3==3
T4==4
P1==5
P2==6
N==7 ;NUMBER/NAME ... USED BY SCAN
C==10 ;CHAR FROM CMD STRING (READ ONLY AC)
I==11 ;POINTS TO INPUT FILE SPEC
F==12 ;FLAGS (LH==PERMANENT, RH==TEMPORARY)
J==13 ;QUEUE TYPE JUMP FLAG
FP==14 ;FB'S FP BLOCK POINTER IN MESSAGE
FD==15 ;FB'S FD BLOCK POINTER IN MESSAGE
M==16 ;LISTING MESSAGE POINTER
P==17 ;PUSH-DOWN POINTER
;I/O CHANNELS
;
DC==1 ;LOOKUP/RENAME DATA FILES
LC==2 ;LISTINGS
..==0 ;FLAG FOR FIELDS TO BE FILLED IN LATER
SUBTTL Symbols, Masks, and Flag Definitions
;PERMANENT FLAGS (LH)
;
L.LOGI==(1B17) ;THIS JOB IS LOGGED IN
L.NSBJ==(1B8) ;NOT LOGGED IN TOP LEVEL
;TEMPORARY FLAGS (RH)
;
R.OUTL==1B30 ;LISTING DEVICE NEEDS OUTPUT EACH LINE
R.ANUL==1B27 ;ALLOW DEVICE NUL:
;QUEUE LOCAL .FPINF SYMBOLS
;
FP.DSP==3B24 ;/DISPOSE: FIELD -- LOCAL SYMBOL
;CONTAINS DISPXX VALUE
FP.OKB==1B25 ;/ERBIN, /OKBIN -- LOCAL SYMBOL
FP.NEW==1B26 ;/NEW -- LOCAL SYMBOL
FP.LOC==17B26 ;FP LOCAL MASK -- LOCAL SYMBOL
;ACK CODE SYMBOLS
;
ACK.NT==400000,,0 ;Mask for /NOTIFY
ACK.JB==377400,,0 ;Mask for job number
ACK.UT==377,,777777 ;Mask for UDT bits
;QUEUE OPERATIONS
;
.QORCR==1 ;CREATE
.QORDF==2 ;/CREATE/DEFER (GALAXY ONLY)
.QORZD==3 ;/KILL/DEFER (GALAXY ONLY)
.QORLS==4 ;LIST
.QORMD==5 ;MODIFY
.QORKL==6 ;KILL
;MODIFICATION INPUT DEPENDENCY SYMBOLS
;
MI.DMT==3B19 ;DEPENDENCY MODIFY TYPE
.MIDAB==0 ;ABSOLUTE
.MIDPL==1 ;PLUS (ADDITIVE)
.MIDMI==2 ;MINUS
.MIDNM==3 ;NO MODIFY
MI.DEP==177777 ;DEPENDENCY PARAMETER
;GENERAL SYMBOLS
;
FBSIZE==FPXSIZ+FDXSIZ ;THE LARGEST FD/FP WE CAN BUILD
MAX<FBSIZE,KIL.SZ,7,DFR.SZ>
FBAREA==MAXSIZ ;THE LARGEST FILE BLOCK/MESSAGE NEEDED
MX.PTH==.FXLEN
PD.PTH==0
SUBTTL Parameters and Defaults
;ASSEMBLY PARAMETERS
;
ND LN$PDL,100 ;LENGTH OF PUSH-DOWN LIST
ND LN$ENT,11 ;LENGTH OF A LOOKUP/ENTER BLOCK
ND LN$DSK,5 ;LENGTH OF DSKCHR BLOCK
ND PUNCDP,0 ;-1=NO PUNCH COMMAND
;0=PUNCH COMMAND TO PTP
;1=PUNCH COMMAND TO CDP
;DEFAULTS
;
RADIX ^D10
DM AFT, 10080, 0, 10 ;AFTER CURRENT TIME IN MINUTES
DM CDP,^O777777, 000,2000 ;CARD PUNCH LIMIT IN CARDS
DM COP, 63, 1, 0 ;NUMBER OF COPIES OF OUTPUT
DM COR, .INFIN,25600,40960 ;CORE LIMIT FOR JOB
DM DPN, 65535, 0, 0 ;INITIAL DEPENDENCY COUNT
DM LIM,^O777777, 00, 0 ;OUTPUT LIMIT
DM LPT,^O777777, 00,2000 ;LINE PRINT LIMIT IN PAGES
DM NOD, 77,0,0 ;NODE NAME
DM HDR, 1, 1, 1 ;FILE HEADERS ON OUTPUT
DM NTF, 1, 0, 1 ;NOTIFY
DM PLT,^O777777, 00, 60 ;PLOT LIMIT IN MINUTES
DM PRI, 63,SPLPRI,MXUPRI ;EXTERNAL PRIORITY
DM PTP,^O777777, 000, 100 ;PT PUNCH LIMIT IN FEET
DM RID, ^O377777, 0, 0 ;REQUEST ID
DM RST, 1, 0, 1 ;RESTART PARAMETER
DM SEQ, 100000, 0, 0 ;JOB'S SEQUENCE NUMBER
DM STR, 100000, 1, 1 ;STARTING POINT IN FILE
DM TIM, ^O777777, 300,3600 ;TIME LIMIT FOR JOB IN SECONDS
DM UNI, 2, 1, 2 ;DEGREE OF FILE NAME UNIQUENESS
DM UNT, 7,0,0 ;UNIT NUMBERS
ND AD.LFD,DISPPRESERVE ;LOG FILE DISPOSITION
ND AD.OPN,.QORCR ;STANDARD OPERATION IS /CREATE
RADIX 8
;THE QUEUES MACRO DEFINES ALL PARAMETERS WHICH NEED TO BE
; EXPANDED INTO TABLES FOR THE VARIOUS QUEUES.
;
;EACH LINE IN THE QUEUES MACRO IS OF THE FORM:
;
; QQ A,B
;
;WHERE:
; A IS THE QUEUE NAME
; B MONITOR COMMAND FOR THE QUEUE
DEFINE QUEUES,<
QQ INP,<SUBMIT>
QQ LPT,<PRINT>
QQ CDP,<CPUNCH>
QQ PTP,<TPUNCH>
QQ PLT,<PLOT>
QQ PAT,<.PATCH>
> ;END DEFINE QUEUES
;NOW INSURE THAT INP QUEUE IS FIRST AND DEFINE QUEUE TYPE SYMBOLS
;
DEFINE QQ(A,B),<
IFDIF <A>,<INP>,<PRINTX ?FIRST QUEUE MUST BE INP>
..TMP==0
QTP'A==..TMP
DEFINE QQ(Z,Y),<
..TMP==..TMP+1
QTP'Z==..TMP
> ;END REDEFINITION OF QQ
> ;END DEFINE QQ
IF1,< QUEUES >
SUBTTL Data Macros
;MACRO TO MOVE DATA AROUND -- WIPES TF
;
DEFINE DATAM(SWRD,SFIELD,DWRD,DFIELD)<
LOAD(TF,SWRD,SFIELD)
XLIST
STORE(TF,DWRD,DFIELD)
LIST
SALL
> ;END OF DEFINE DATAM
;NMDCHG MACRO TO CHECK FILE BITS IN MODIFY.
; SETS T1 = THE NEW VALUE OR -1 IF NO CHANGE
;
DEFINE NMDCHG(FIELD),<
MOVE T1,I.MODM(I)
XLIST
TXNN (T1,FIELD)
TDOA T1,[-1]
LOAD (T1,I.MOD(I),FIELD)
LIST
SALL
> ;END OF DEFINE NMDCHG
;MACRO TO MOVE A WORD DIRECTLY INTO THE MODIFY MESSAGE USING GRPSTO
;
DEFINE MOVWRD(WORD),<
MOVE T1,WORD
XLIST
PUSHJ P,GRPSTO
LIST
SALL
> ;END OF DEFINE MOVWRD
;INCR MACRO
;
DEFINE INCR(A,B),<AOS A>
DEFINE SWSEG<
XLIST
LIT
LIST
RELOC
> ;END OF DEFINE SWSEG
;GCORE MACRO GET N MORE WORDS AT .JBFF
;
DEFINE GCORE (A),<
MOVEI T1,A
XLIST
PUSHJ P,GCORE.
LIST
>
SUBTTL Message Macros
DEFINE N$FATE(A,B,C,%A),<
IFNDEF E.'A,<E.'A:>
SKIPA
XLIST
JRST %A
JSP T1,NFMSG'B
SIXBIT \ A\
ASCIZ \C\
%A:
LIST
SALL
> ;END DEFINE N$FATE
DEFINE N$WARN(A,B,C,%A),<
IF1,<IFNDEF E.'A,<E.'A:>>
SKIPA
XLIST
JRST %A
PUSHJ P,FWARN'B
<SIXBIT \A\>+[ASCIZ \C\]
%A:
LIST
SALL
> ;END DEFINE N$WARN
DEFINE N$INFO(A,B,C,%A),<
IF1,<IFNDEF E.'A,<E.'A:>>
SKIPA
XLIST
JRST %A
PUSHJ P,FINFO'B
<SIXBIT \A\>+[ASCIZ \C\]
%A:
LIST
SALL
> ;END DEFINE N$INFO
;COMMANDS WHICH RUN QUEUE
;
DEFINE QQ(A,B),<
SIXBIT /B/
>
SIXBIT /QUEUE/ ;SWITCH.INI LINE ON .RUN ETC
QCOMS: SIXBIT /QUEUE/
IFGE PUNCDP,< SIXBIT /PUNCH/>
QUEUES
QCMLEN==.-QCOMS
PATCMD: BLOCK 1 ;PATCH COMMAND DISPATCH ADDRESS
;DEVICES USED BY THOSE COMMANDS
;
DEFINE QQ(A,B),<
SIXBIT /A/
>
QDEVS: SIXBIT /LP/ ;QUEUE COMMAND (MUST BE LP NOT LPT)
IFG PUNCDP,<SIXBIT /CDP/>
IFE PUNCDP,<SIXBIT /PTP/>
IFL PUNCDP,<>
QUEUES
SUBTTL Device Macros
DEFINE DEVICE,<
X LPT,.OTLPT,LIQLPT
X LL,.OTLPT,LIQLPT
X LU,.OTLPT,LIQLPT
X PTP,.OTPTP,LIQPTP
X CDP,.OTCDP,LIQCDP
X PLT,.OTPLT,LIQPLT
X INP,.OTBAT,LIQBAT
> ;END DEFINE DEVICE
DEFINE X(A,B,C),<
SIXBIT /A/
> ;END DEFINE X
DEVTAB: DEVICE
NDEVS==.-DEVTAB
DEFINE X(A,B,C),<
EXP B
> ;END DEFINE X
OBJTAB: DEVICE
DEFINE X(A,B,C),<
EXP C
> ;END DEFINE X
LIQTAB: DEVICE
SUBTTL QUEUE Entry and Initialization
QUEUE: PORTAL .+2 ;NORMAL ENTRY
PORTAL .+2 ;CCL ENTRY
TDZA T1,T1 ;ALLOW FOR CCL ENTRY POINT
MOVEI T1,1 ;YES--FLAG CCL ENTRY
MOVEM T1,STRTOF ;SAVE FOR ISCAN
RESET ;RESET ANY EXTERNAL I/O
SETZM F,ZCOR ;CLEAR FLAG, CLEAR CORE
MOVE T1,[ZCOR,,ZCOR+1]
BLT T1,EZCOR
MOVE P,[IOWD LN$PDL,PDLST] ;ESTABLISH PUSH-DOWN LIST
PUSHJ P,GTTABS ;DO ALL NECESSARY GETTABS
PJOB T1, ;GET THIS JOB'S NUMBER
MOVNS T1 ;GET JOB ARG FOR JOBSTS UUO
JOBSTS T1, ;GET THIS JOB'S STATUS
JRST .+2 ;FAILED--ASSUME LOGGED IN
TXNE T1,JB.ULI ;SEE IF LOGGED IN
TLO F,L.LOGI ;YES--SET FLAG
TLNE F,L.LOGI ;SEE IF LOGGED IN
JRST QUESS2 ;YES--PROCEED
TLO F,L.NSBJ ;INDICATE NOT LOGGED IN
SETOM T1 ;START AT OUR JOB
QUESTL: CTLJOB T1, ;GET CONTROLLING NUMBER
JRST QUESS2 ;NONE--ASSUME OK ANYWAY
JUMPL T1,QUESS2 ;IF NONE, ASSUME OK
MOVN T2,T1 ;GET -JOB
JOBSTS T2, ;GET ITS STATUS
SETOM T2 ;ASSUME LOGGED IN
TXNN T2,JB.ULI ;SEE IF LOGGED IN
JRST QUESTL ;NO--LOOP ON UP CHAIN
HRLZ T2,T1 ;GET THIS JOB'S NUMBER
HRRI T2,.GTPPN ;POINT TO PPN TABLE
GETTAB T2, ;GET PPN FROM MONITOR
JRST QUESS2 ;NONE!--GIVE UP
MOVEM T2,.MYPPN## ;OK--USE THAT INSTEAD
TLZ F,L.NSBJ ;OK AFTER ALL (PROBABLY OPSER CALL)
QUESS2: MOVE T1,.JBREL## ;SAVE CURRENT CORE
HRL T1,.JBFF## ;AND START OF FREE CORE
MOVEM T1,SAVCOR ;FOR LATER TO RESTORE
MOVE T1,[XWD ISCLEN, ISCARG] ;POINT AT .ISCAN ARGUMENTS
PUSHJ P,.ISCAN## ;INITIALIZE COMMAND SCANNER
MOVEM T1,COMIDX ;SAVE COMMAND INDEX
SKIPGE T1 ;SEE IF COMMAND
TDZA T1,T1 ;NO--CLEAR DEFAULT TYPE
MOVE T1,QDEVS(T1) ;YES--GET QUEUE NAME
MOVEM T1,DQTYPE ;STORE AS DEFAULT TYPE
SUBTTL QUELOP Main Processing Loop
;HERE WHENEVER * TYPED (IE, MAJOR RESTART)
;
QUELOP: MOVE T1,[XWD TSCLEN,TSCARG] ;POINT AT .TSCAN ARGUMENTS
PUSHJ P,.TSCAN## ;CALL TRADITIONAL SCANNER
SKIPE O.MODM ;SEE IF OUTPUT SPEC
JRST SOMCMD ;YES--NORMAL HANDLING
MOVE T1,I.NXZR ;SEE IF ANY COMMANDS
MOVE T2,I.INZR ;GET FIRST INPUT SPEC
SUB T1,T2 ;GET NUMBER OF SPECS*I.LZER
JUMPE T1,NOCMD ;NONE--NULL COMMAND
CAIN T1,I.LZER ;SEE IF JUST ONE
SKIPE .FXNAM(T2) ; WITH NULL FILE NAME
JRST SOMCMD ;NO--SOMETHING THERE
HLLZ T1,.FXEXT(T2) ;GET THE EXTENSION
JUMPN T1,SOMCMD ;JUMP IF THERE IS ONE
;HERE ON A NULL MONITOR COMMAND
;
NOCMD: PUSHJ P,DEFAU1 ;GO FILL IN MODIFIED DEFAULTS
JRST DOCMD ;THEN GO BELOW TO DO THE WORK
;HERE WHEN A NON-NULL COMMAND IS FOUND
;
SOMCMD: PUSHJ P,DEFAUL ;GO FILL IN DEFAULTS
;HERE AFTER DEFAULTS ARE DONE
;
DOCMD: PUSHJ P,COMMND ;DO THE COMMAND
JRST QUELOP ;LOOP BACK FOR MORE WORK
SUBTTL SCAN Argument Blocks
;.ISCAN ARGUMENT BLOCK
ISCARG: IOWD QCMLEN, QCOMS ;IOWD POINTER TO MONITOR COMMAND NAMES
XWD STRTOF, 'QUE' ;ADDRESS OF START OFFSET,,CCL NAME
ISCLEN==.-ISCARG ;LENGTH OF .ISCAN ARGUMENT BLOCK
;.TSCAN ARGUMENT BLOCK
TSCARG: IOWD SWTCHL, SWTCHN ;IOWD POINTER TO SWITCH NAMES
XWD SWTCHD, SWTCHM ;DEFAULTS,,PROCESSOR
XWD 0, SWTCHP ;(FUTURE),,STORAGE POINTERS
SIXBIT /QUEUE/ ;NAME FOR HELP
XWD CLRANS, CLRFIL ;CLEAR ANSWER,,PER-FILE AREAS
XWD INFIL, OUTFIL ;ALLOCATE INPUT,,OUTPUT FILE SPEC
XWD FILSTK, APLSTK ;MEMORIZE,,APPLY STICKY DEFAULTS
XWD CLRSTK, 0 ;CLEAR STICKY DEFAULTS,,OUTPUT ROUTINE
TSCLEN==.-TSCARG ;LENGTH OF .TSCAN ARGUMENT BLOCK
;.OSCAN ARGUMENT BLOCK
OSCARG: IOWD SWTCHL, SWTCHN ;IOWD POINTER TO SWITCH NAMES
XWD SWTCHD, SWTCHM ;DEFAULTS,,PROCESSOR
XWD 0, SWTCHP ;(FUTURE),,STORAGE POINTERS
XWD 0, 0 ;NO HELP
XWD 2, OSCNML ;POINTER TO OPTIONS LIST
OSCLEN==.-OSCARG ;LENGTH OF .OSCAN ARGUMENT BLOCK
SUBTTL TSCAN Routine Calls
;HERE TO CLEAR OUT A SINGLE FILE SPEC
;
CLRFIL: SETZM F.ZER
MOVE T1,[F.ZER,,F.ZER+1]
BLT T1,F.EZER
SETOM F.MIN
MOVE T1,[F.MIN,,F.MIN+1]
BLT T1,F.EMIN
POPJ P,
;HERE WHEN A SPECIFICATION FOR OUTPUT SIDE IS FOUND
;
OUTFIL: SKIPN F.MOD ;ANY MOD SWITCHES?
SKIPE F.MODM ; " " "
JRST OUTFL1 ;YES, GIVE ERROR
SKIPGE F.STRT ;/START?
SKIPL F.RPT ;OR /REPORT?
OUTFL1: JRST E.FMO## ;YES, GIVE ERROR
MOVEI T1,O.ZER ;POINT TO OUTPUT AREA
MOVEI T2,O.LZER ;INDICATE LENGTH
POPJ P, ;RETURN
;HERE WHEN A SPECIFICATION FOR INPUT SIDE FOUND
;
INFIL: PUSHJ P,GTCLIN ;GET AND CLEAR INPUT AREA
MOVEI T2,I.MOD(T1) ;POINT TO OUR PART
HRLI T2,F.ZER ;POINT TO OUR F AREA
BLT T2,I.LZER(T1) ;COPY OUR PART
MOVEI T2,I.LZER ;AND PASS BLOCK LENGTH
POPJ P, ;RETURN
;HERE TO CLEAR STICKY DEFAULTS
;
CLRSTK: SETZM P.ZER ;ZERO OUT DEFAULTS
MOVE T1,[P.ZER,,P.ZER+1]
BLT T1,P.EZER
SETOM P.MIN
MOVE T1,[P.MIN,,P.MIN+1]
BLT T1,P.EMIN
POPJ P,
;CLRANS -- CLEAR SCANNING ANSWER AREA
;CALL: PUSHJ P,CLRANS
;USES T1
;
CLRANS: HLLZS F ;CLEAR TEMPORARY FLAGS
SETZM S.ZER ;ZERO OUT COMMAND ACCUMULATORS
MOVE T1,[S.ZER,,S.ZER+1]
BLT T1,S.EZER
SETOM S.MIN ;PRESET SWITCH PARAMETERS
MOVE T1,[S.MIN,,S.MIN+1]
BLT T1,S.EMIN
MOVE T1,SAVCOR ;GET INITIAL START OF FREE CORE
HLRZM T1,.JBFF## ;SET START OF FREE CORE
HLRZM T1,I.INZR ;ESTABLISH PARAMETER AREA HERE
HLRZM T1,I.NXZR ;AND OF ZERO LENGTH
TLZ T1,-1 ;CLEAR JUNK
CORE T1, ;RESTORE REAL CORE ALSO
JFCL ;OK IF CAN'T
POPJ P, ;RETURN
;FILSTK -- MEMORIZE STICKY DEFAULTS
;CALL: PUSHJ P,FILSTK
; RETURNS AFTER NON-ZERO F.XXX COPIED TO P.XXX
;USES T1, T2
;
FILSTK: MOVE T1,F.MOD ;COPY SWITCHES
MOVE T2,F.MODM
ANDCAM T2,P.MOD
IORM T1,P.MOD
IORM T2,P.MODM
MOVE T1,F.STRT ;GET THE STARTING POINT
MOVEM T1,P.STRT ; ..
SETCM T1,F.RPT ;MEMORIZE /REPORT
JUMPE T1,FILS.1 ;DON'T STORE NULL REPORT
DMOVE T1,F.RPT ;GET /REPORT
DMOVEM T1,P.RPT ;AND SAVE IT
FILS.1: MOVE T1,[XWD F.FONT,P.FONT] ;MEMORIZE /FONT
MOVE T2,F.FONT ;GET /FONT
CAME T2,[-1] ;WAS IT SET ????
BLT T1,P.FONT+FNMLTH-1 ;YES, MEMORIZE IT
POPJ P, ;AND RETURN
;HERE AT END OF SPECIFICATION TO APPLY USER SUPPLIED DEFAULTS
;
APLSTK: MOVE T1,P.MOD ;APPLY ALL FILE SWITCHES
ANDCM T1,F.MODM ;MASK USED TO INDICATE WHICH WERE TYPED
IORM T1,F.MOD ; ..
MOVE T1,P.MODM ; ..
IORM T1,F.MODM ; ..
MOVE T1,F.STRT ;GET THE STARTING POINT
CAMN T1,[-1] ;WAS IT SPECIFIED?
MOVE T1,P.STRT ;NO, USE THE GLOBAL DEFAULT
MOVEM T1,F.STRT ;NO--SUPPLY DEFAULT
SETCM T1,P.RPT ;GET THE REPORT CODE
JUMPE T1,APLS.1 ;NOW FOR THE FONT SWITCH
SETCM T1,F.RPT ;SKIP IF NO REPORT GIVEN
JUMPN T1,APLS.1 ;DO THE FONT SWITCH
DMOVE T1,P.RPT ;GET /REPORT
DMOVEM T1,F.RPT ;SAVE IT
APLS.1: MOVE T2,[XWD P.FONT,F.FONT] ;PREPARE TO BLT STICKY FONT NAME
MOVE T1,F.FONT ;GET FILE SPECIFIC /FONT
CAME T1,[-1] ;WAS IT SET ????
POPJ P, ;YES, DON'T USE STICKY
MOVE T1,P.FONT ;NO, GET STICKY /FONT
CAME T1,[-1] ;WAS IT SET ????
BLT T2,F.FONT+FNMLTH-1 ;YES, APPLY IT
POPJ P, ;RETURN
SUBTTL DEFAUL Command Scanning Default Routines
;DEFAUL -- SUBROUTINE TO FILL IN DEFAULTS AND DETECT
; INCONSISTENCIES AFTER COMMAND SCANNING
;DEFAU1 -- DITTO EXCEPT DEFAULT OPERATION IS /LIST
;USES EVERYTHING
;
DEFAUL: MOVEI T1,AD.OPN ;FIRST DECIDE WHAT TYPE OF REQUEST
SKIPLE S.CHK ;HAVE /CHECK ?
SKIPL S.LIST ;HAVE /LIST ?
JRST DEFAU0 ;CONTINUE
MOVEI T2,LISTJOBS ;GET DEFAULT /LIST VALUE
MOVEM T2,S.LIST ;DEFAULT TO /LIST:JOBS
DEFAU0: SKIPL S.LIST ;SEE IF /LIST SHOWED UP
DEFAU1: MOVEI T1,.QORLS ;YES--FORCE /LIST AS DEFAULT
SKIPGE S.OPN
MOVEM T1,S.OPN
SKIPLE S.DFR ;WAS /DEFER SPECIFIED?
POPJ P, ;YES, RETURN NOW
MOVE T1,S.OPN ;FETCH ACTUAL OPERATION
MOVE T2,O.MODM ;GET INDICATOR OF OUTPUT
CAIE T1,.QORMD ;SEE IF /MODIFY
CAIN T1,.QORKL ;OR IF /KILL
SKIPA ;YES, SKIP
JRST DEFA1A ;NO, GO ON
JUMPE T2,E.SJN ;TYPE "JOB OR SEQ" ON LEFT...
MOVX T1,FX.NDV ;GET NULL DEVICE BIT
TDNN T1,O.MOD ;WAS IT SET?
JRST DEFA1A ;NO, HE SPECIFIED ONE, CONTINUE
MOVS T2,DQTYPE ;NO, GET DEFAULT QUEUE TYPE
SKIPE DQTYPE ;IS IT IS NULL,
CAIN T2,'LP ' ; OR JUST "LP"
N$FATE <NQS>,,<No queue specified in /KILL or /MODIFY>
DEFA1A: SETZM MADFIL ;CLEAR "MADE FILESPEC"
PUSHJ P,QUETYP ;IDENTIFY WHAT TYPE OF QUEUE
MOVE J,T1 ;SAVE AWAY FOR EASY TESTS LATER
MOVE P1,I.INZR ;RESET TO START OF INPUT AREA
ADDI P1,I.LZER ;FORCE AT LEAST ONE REQUEST
SKIPN J ;SEE IF INPUT QUEUE
ADDI P1,I.LZER ;YES--THEREFORE, TWO ENTRIES USED
DEFAU2: CAMG P1,I.NXZR ;SEE IF NEED MORE THAN GOT
JRST DEFAU3 ;NO--OK TO PROCEED
PUSHJ P,.CLRFL## ;CLEAR FXXX AREAS
PUSHJ P,APLSTK ;APPLY STICKY DEFAULTS
PUSHJ P,INFIL ;ALLOCATE SPACE
PUSHJ P,.GTSPC## ;COPY SPEC
SETOM MADFIL ;WE MADE A FILESPEC
JRST DEFAU2 ;LOOP BACK TO SEE IF ENOUGH
DEFAU3: MOVE I,I.INZR ;START AT BEGINNING OF REQUESTS
JUMPN J,DEFAU4 ;IF NOT INPUT QUEUE, WE ARE DONE
CAMN P1,I.NXZR ;IF INP AND NOT LIST SEE IF GT 2 ENTRY
JRST DEFAU4 ;NO--OK TO PROCEED
N$WARN <OTE>,,<Input queue request uses only two entries>
MOVEM P1,I.NXZR ;CHANGE LIMIT TO AGREE
DEFAU4: PUSHJ P,CLRFIL ;CLEAR THE F AREA
PUSHJ P,CLRSTK ;CLEAR THE P AREAA
MOVE T1,[XWD OSCLEN, OSCARG] ;POINT AT .OSCAN ARGUMENTS
MOVX T2,'QUEUE ' ;WHAT TO READ
MOVEM T2,OSCNML ;STORE IT
MOVE T2,COMIDX ;GET THE COMMAND INDEX
MOVE T2,QCOMS(T2) ;GET THE COMMAND
MOVEM T2,OSCNML+1 ;AND SAVE FOR CALL
MOVE I,S.OPN ;GET OPERATION WORD
CLEARM CREFLG ;ASSUME IT'S CREATE
PUSH P,S.ATTRIB ;SAVE /UNIT FOR LIST COMMANDS
PUSH P,S.UNTY ;DITTO
CAIE I,.QORMD ;IS IT MODIFY?
CAIN I,.QORKL ;OR KILL?
SOSA CREFLG ;IT'S NOT CREATE!!
PUSHJ P,.OSCAN## ;LOOK AT OPTION FILE
POP P,T2 ;GET UNIT TYPE BACK
POP P,T1 ;GET POSSIBLE /UNIT VALUE BACK
CAIN I,.QORLS ;/LIST COMMAND ???
DMOVEM T1,S.ATTR ;YES, IGNORE .OSCAN'S /UNIT OR /STREAM
SETOM PTHFCN ;SET TO READ DEFAULT
MOVE T1,[.PTMAX,,PTHFCN]
PATH. T1, ; READ IT
SETZM PTHPPN ;CAN'T--ASSUME DEFAULT
SKIPN PTHPPN ;SEE IF SET
SETZM PTHPPN+1 ;NO--CLEAR SFDS
MOVE T1,.MYPPN## ;GET SELF
SKIPN PTHPPN ;SEE IF DEFAULT KNOWN
MOVEM T1,PTHPPN ;NO--THEN USE SELF
MOVEI T1,O.ZER ;SETUP ARGS FOR OSDFS
MOVEI T2,O.LZER ; "
SKIPN CREFLG ;IS IT CREATE?
PUSHJ P,.OSDFS## ;YES, DO SWITCH INI DEFAULTING
CAIE I,.QORLS ;SEE IF LISTING DEVICE
JRST OUDEF1 ;NO--NOT A REAL DEVICE
MOVSI T1,'TTY' ;SET DEFAULT DEVICE
SKIPN P1,O.DEV ;YES--CHECK DEVICE CHARACTERISTICS
MOVE P1,T1 ;NO DEVICE--USE DEFAULT
MOVEM P1,O.DEV ;SAVE FOR LATER
MOVE T1,O.MOD ;GET MOD WORD
TXNE T1,FX.PHY ;SEE IF PHYS I/O NEEDED
DEVCHR P1,UU.PHY ;YES--TRY IT
TXNN T1,FX.PHY ;SEE IF NOT
DEVCHR P1, ;NO--USE LOGICAL FROM THE MONITOR
TXNN P1,DV.OUT ;SEE IF CAPABLE OF OUTPUT
JRST E.NOD ;NO--TELL USER HE BLEW IT
JRST OUDEF2 ;YES--PROCEED(WARNING--P1 USED BELOW)
OUDEF1: MOVX T1,FX.NDV ;CLEAR OUT
ANDCAM T1,O.MOD ; NULL DEVICE FLAG
SKIPE O.EXT ;SKIP IF EXTENSION IS ZERO
N$FATE <OEI>,,<Output Extension is Illegal>
OUDEF2: CAIN I,.QORLS ;SEE IF LISTING
JRST OUDF2A ;YES--SKIP ONWARD
MOVE T1,O.MOD ;GET OUTPUT FLAGS
TXNE T1,FX.DIR ;WAS A DIRECTORY SPECIFIED?
JRST OUDF2B ;YES, CONTINUE ON
SETOM O.DIRM ;NO, SET DIRECTORY MASK
JRST OUDF2A ;AND CONTINUE ON
OUDF2B: MOVE T1,.MYPPN## ;GET SELF
MOVSI T2,-1 ;MASK LEFT HALF
TDNN T2,O.DIR ;SEE IF SET
HRROS O.DIRM ;NO--PUT ON MASK
TDNN T2,O.DIR ; ..
HLLM T1,O.DIR ;SET IN SELF PROJECT
MOVEI T2,-1 ;MASK RIGHT HALF
TDNN T2,O.DIR ;SEE IF SET
HLLOS O.DIRM ;NO--PUT ON MASK
TDNN T2,O.DIR ; ..
HRRM T1,O.DIR ;SET IN SELF PROGRAMMER
SKIPE O.DIR+2 ;CHECK FOR SFDS
JRST E.QSFD ;ILLEGAL IN QUEUE USER
JRST OUDEF4 ;SKIP ON
OUDF2A: CAIE I,.QORLS ;LISTING THE QUEUES?
JRST OUDF3A ;NO
MOVE P1,O.DEV ;GET OUTPUT DEVICE
MOVX T1,FX.PHY ;GET PHYSICAL FLAG
SETZM T2 ;ASSUME NOT PHYSICAL
TDNE T1,O.MOD ;IS IT SET?
MOVX T2,UU.PHY ;YES
DEVCHR P1,(T2) ;GET DEVCHR WORD
SKIPN O.NAM ;HAVE A FILE NAME?
TXNN P1,DV.DIR ;A DIRECTORY DEVICE?
JRST OUDF3A ;NO NEED TO GENERATE A FILE NAME
MSTIME T1, ;YES--MANUFACTURE NAME HHMMSS
IDIVI T1,^D1000 ;GET SECONDS
MOVE T4,[POINT 6,O.NAM] ;SETUP BYTE POINTER
MOVSI T3,-6 ;INITIALIZE LOOP COUNTER
OUDEF3: IDIV T1,[^D36000
^D3600
^D600
^D60
^D10
^D1](T3) ;GET NEXT DIGIT
ADDI T1,'0' ;CONVERT TO SIXBIT DIGIT
IDPB T1,T4 ;STORE INTO NAME
MOVE T1,T2 ;RESTORE REMAINDER
AOBJN T3,OUDEF3 ;LOOP
SETOM O.NAMM ;CLEAR MASK TO NO WILD-CARDS
OUDF3A: HRLOI T1,'LSQ' ;GET DEFAULT EXTENSION
SKIPN O.EXT ;ONE SPECIFIED?
MOVEM T1,O.EXT ;NO, USE THE DEFAULT
OUDEF4: SKIPE CREFLG ;SEE IF MODIFY
JRST OUDEF5 ;YES--WILD CARDS ARE LEGAL
MOVE T1,[O.LZER,,O.ZER] ;SETUP TO CALL .STOPN
MOVEI T2,L.OPEN ;OPEN BLOCK
MOVE T3,[LN$ENT,,L.LOOK]
PUSHJ P,.STOPN## ;CALL .STOPN
N$FATE <OWI>,,<Output Wildcards are Illegal>
JRST INDEF ;AND CONTINUE
OUDEF5: SKIPLE S.SEQ ;WAS /SEQ: SPECIFIED ??
JRST INDEF ;YES,,CONTINUE
SKIPE O.NAM ;WAS THERE A JOBNAME ??
JRST INDEF ;YES,,CONTINUE
SKIPG S.RID ;WAS /REQ: SPECIFIED ??
N$FATE <NSR>,,<Jobname or /SEQUENCE or /REQUESTID required>
;HERE TO SUPPLY INPUT SIDE DEFAULTS
INDEF: MOVE J,QTYPE ;GET QTYPE IN J
MOVE I,I.INZR ;INITIALIZE LOOP
;LOOP HERE TO DEFAULT NEXT INPUT FILE
INDEF1: SKIPE CREFLG ;SEE IF /MODIFY
JRST INDEF2 ;YES--SKIP TO DIRECTORY TESTS
MOVEI T1,0(I) ;START SETTING UP TO CALL OSDFS
MOVEI T2,.FXLEN ;ADR AND LEN
PUSHJ P,.OSDFS## ;CALL IT
;DEVICE DEFAULTING
MOVSI T1,'DSK' ;DEFAULT TO DSK
CAMN I,I.INZR ;IS THIS THE FIRST SPEC?
JRST INDF11 ;YES,,SKIP THIS
MOVE T1,.FXDEV-I.LZER(I) ;USE DEVICE FROM LAST SPEC
JUMPN J,INDF11 ;JUMP IF NOT INPUT QUEUE
MOVSI T1,'DSK' ;DEFAULT IS ALWAYS DSK: FOR LOG FILE
MOVX T3,%EQONL ;LOAD OUTPUT NOLOG BIT
MOVS T2,.FXDEV(I) ;GET LOGFILE DEVICE
CAIN T2,'NUL' ;IS IT NUL:???
MOVEM T3,S.OUT ;YES, SET THE EXPLICIT BIT
JRST INDF12 ;PROCEED
INDF11: JUMPGE J,INDF12 ;JUMP IF NOT /LIST
MOVE T1,DQTYPE ;GET DEFAULT QUEUE
TLNN T1,(77B17) ;IS IT FROM QUEUE COMMAND?
SETZM T1 ;YES--DEFAULT IS ALL:
INDF12: MOVX T2,FX.NDV ;SEE IF
TDNN T2,.FXMOD(I) ; NULL DEVICE
SKIPN .FXDEV(I)
MOVEM T1,.FXDEV(I)
;FILE NAME DEFAULTING FOR INPUT QUEUE CONTROL FILE
JUMPN J,INDF13 ;JUMP IF NOT INPUT QUEUE
CAME I,I.INZR ;FIRST FILE?
JRST INDF13 ;NO, REGULAR DEFAULTING FOR LOG FILE
MOVE T1,.FXNMM(I) ;TEST NAME WILD
CAME T1,[-1] ;WILD NAME?
SKIPN .FXNAM(I) ;YES--SEE IF NAME THERE
JRST .+2 ;NO--THEN OK
JRST E.WCI ;YES--ILLEGAL
MOVEI T1,0 ;CLEAR DEFAULT
SKIPN T2,O.NAM ;GET JOB NAME
MOVE T2,T1 ;IF NO JOB NAME, DEFAULT IS CTL FILE
SKIPN T1,.FXNAM(I) ;SEE IF NAME SUPPLIED
MOVE T1,T2 ;NO--GET DEFAULT NAME
JUMPE T1,E.NNI ;ERROR IF NONE
MOVEM T1,.FXNAM(I) ;AND STORE RESULT
SETOM .FXNMM(I) ;REMOVE WILDCARD FROM NAME
JRST INDF14 ;SEE ABOUT EXTENSION
;FILE NAME DEFAULTING FOR OUTPUT QUEUES AND /LIST
INDF13: SKIPE .FXNAM(I) ;DEFAULT FILE NAME
JRST INDF14 ;NO DEFAULT NEEDED
CAME I,I.INZR ;SEE IF FIRST FILE
SKIPA T1,.FXNAM-I.LZER(I) ;NO--USE PREVIOUS FILE NAME
MOVSI T1,'* ' ;YES--SUPPLY WILD DEFAULT
MOVEM T1,.FXNAM(I)
CAME I,I.INZR ;SEE IF FIRST
SKIPA T1,.FXNMM-I.LZER(I) ;NO--USE PREVIOUS MASK
MOVEI T1,0 ;YES--USE WILD MASK
MOVEM T1,.FXNMM(I) ; ..
;EXTENSION DEFAULTING
INDF14: SKIPE .FXEXT(I) ;DEFAULT EXTENSION
JRST INDF16 ;NOT NEEDED
MOVSI T1,'* ' ;SET DEFAULT FOR /MODIFY
SKIPE CREFLG ;SEE IF /MODIFY
JRST INDF15 ;YES--GO STORE DEFAULT
JUMPN J,INDF16 ;JUMP IF NOT INPUT QUEUE
HRLOI T1,'CTL' ;LOAD THE EXTENSION
CAMN I,I.INZR ;SEE IF FIRST FILE
JRST INDF15 ;YES--PROCEED BELOW
HRLOI T1,'LOG' ; CHANGE TO LOG
INDF15: MOVEM T1,.FXEXT(I) ;STORE IT
;CHECK FOR NON-WILD EXTENSION ON INPUT QUEUE
INDF16: JUMPN J,INDEF2 ;JUMP IF NOT INPUT QUEUE
SETCM T1,.FXEXT(I) ;INPUT AND NOT /LIST--SEE IF
TRNE T1,-1 ; EXTENSION HAS WILDCARD
JRST E.WXI ;YES--ILLEGAL
;DIRECTORY DEFAULTING
INDEF2: MOVX T1,FX.DIR ;GET DIRECTORY BIT
JUMPGE J,INDEF3 ;JUMP IF NOT /LIST
SKIPE .FXDIR+2(I) ;SEE IF LISTING SFDS
JRST E.LSFD ;YES--THAT'S WRONG
SKIPN T2,O.DIR ;OUTPUT DIRECTORY
MOVE T2,.MYPPN## ;NO, GET USER'S PPN
TDNE T1,.FXMOM(I) ;DIRECTORY PRESENT?
JRST INDF21 ;YES, CHECK FOR [,] OR [-]
SETOM .FXDIR(I) ;NO--SET FOR ALL USERS
JRST INDF22 ;AND INDICATE DIRECTORY SET
INDF21: MOVSI T3,-1 ;YES--USE HIM FOR DEFAULT
TDNN T3,.FXDIR(I) ;CHECK FOR PROJECT
HRROS .FXDIM(I) ;BLANK--SET IT
TDNN T3,.FXDIR(I) ; ..
HLLM T2,.FXDIR(I) ; TO QUEUED USER
MOVEI T3,-1 ;CHECK FOR
TDNN T3,.FXDIR(I) ; PROGRAMMER NUMBER
HLLOS .FXDIM(I) ;BLANK--SET IT
TDNN T3,.FXDIR(I) ; ..
HRRM T2,.FXDIR(I) ; TO QUEUED USER
INDF22: IORM T1,.FXMOD(I) ;INDICATE DIRECTORY
IORM T1,.FXMOM(I) ; SPECIFIED
;CHECK FOR WILD CARDS IN DIRECTORY FOR INPUT QUEUE
INDEF3: SKIPE CREFLG ;SEE IF /MODIFY
JRST INDF42 ;YES--SKIP TO SWITCH TESTS
JUMPN J,INDEF4 ;JUMP IF NOT INPUT QUEUE
MOVE T1,.FXDIR(I) ;GET DIRECTORY
SETCM T2,.FXDIM(I) ;AND COMPLEMENT OF MASK
TLNN T1,-1 ;SEE IF PROJECT DEFAULT
TLZ T2,-1 ;YES--CLEAR WILD-CARDS
TRNN T1,-1 ;SEE IF PROGRAMMER DEFAULT
TRZ T2,-1 ;YES--CLEAR WILD-CARDS
JUMPN T2,E.WDI ;ERROR IF WILD UFD
SETOM T1 ;INPUT--CHECK FOR WILD DIRECTORY
MOVEI T2,2(I) ;SET POINTER TO SPEC
HRLI T2,1-.FXLND ;COUNT SFD DEPTH
INDF31: SKIPN .FXDIR(T2) ;SEE IF SPECIFIED
JRST INDEF4 ;NO--ALL DONE
CAME T1,.FXDIM(T2) ;SEE IF NOT WILD
JRST E.WDI ;ERROR IF SO
INCR T2 ;ADVANCE COUNT
AOBJN T2,INDF31 ;LOOP OVER SFD DEPTH
;PER-FILE SWITCH DEFAULTING
INDEF4: MOVE T1,INDADS ;ABSENT DEFAULTS FOR SWITCHES
JUMPN J,INDF41 ;JUMP IF NOT INPUT QUEUE
CAME I,I.INZR ;IF INPUT AND LOG FILE,
MOVE T1,INDADI ; USE SPECIAL SET
INDF41: ANDCM T1,I.MODM(I) ;MASK TO ONLY THE NEEDED ONES
IORM T1,I.MOD(I) ;AND INCLUDE OUR DEFAULTS
MOVE T1,F.MOD ;GET MOD WORD
ANDCM T1,I.MODM(I) ;TEST
IORM T1,I.MOD(I) ;AND SET
MOVE T1,F.MODM ;GET GET MOD WORD MASK
IORM T1,I.MODM(I) ;AND OR IT IN
MOVE T1,I.STRT(I) ;GET START PARAMETER
CAMN T1,[-1] ;SET?
MOVE T1,F.STRT ;NO, GET DEFAULT
CAMN T1,[-1] ;HAVE A TAG?
SETZM T1 ;NO
MOVEM T1,I.STRT(I) ;STORE IT
DMOVE T1,I.RPT(I) ;GET /REPORT
CAMN T1,[-1] ;WAS IT SET?
DMOVE T1,F.RPT ;GET DEFAULT
DMOVEM T1,I.RPT(I) ;STORE IT
MOVE T1,I.FONT(I) ;GET /FONT
CAME T1,[-1] ;WAS IT SET ????
JRST INDF42 ;YES, DON'T DEFAULT
HRLI T1,F.FONT ;NO, MOVE FONT SPEC
HRRI T1,I.FONT(I) ;GET DEFAULT
BLT T1,I.FONT+FNMLTH-1(I) ;MOVE IT AWAY
INDF42: LOAD T1,I.MOD(I),FP.FPF ;GET /PAPER: SWITCH
CAIN J,QTPCDP ;IS IT THE CARD-PUNCH QUEUE?
CAIE T1,PUNCBCD ;YES, DID HE SAY /PUNCH:BCD
SKIPA ;NOT CDP OR NOT /PUN:BCD
MOVEI T1,PUNC026 ;YES, BCD=026
STORE T1,I.MOD(I),FP.FPF ;AND STORE IT
MOVEI T1,AD.STR ;GET DEFAULT STARTING POINT
SKIPE CREFLG ;SEE IF /MODIFY
SETOM T1 ;YES--CLEAR DEFAULT
MOVE T2,I.STRT(I) ;GET SPECIFIED VALUE
CAMN T2,[-1] ;WAS IT SPECFIED?
MOVEM T1,I.STRT(I) ;NO--USE DEFAULT
;QUEUE NAME DEFAULTING
JUMPGE J,INDEF5 ;JUMP IF NOT /LIST
SKIPE N,.FXDEV(I) ;/LIST--GET QUE NAME
PUSHJ P,XPNQUE ;EXPAND ABBREVIATION
MOVEM N,.FXDEV(I) ;AND STORE RESULT
INDEF5: ADDI I,I.LZER ;ADVANCE POINTER
CAMGE I,I.NXZR ;SEE IF DONE YET
JRST INDEF1 ;NO--LOOP BACK
JRST SWDEF ;DEFAULT GLOBAL SWITCHES
;DEFAULT FOR PER-FILE SWITCHES FOR INPUT FILES
;(NOTE: FP.NFH IS BACKWARDS IN I.MOD FOR "SN" MACRO)
INDADS: INSVL.(SPACSI,FP.FSP) + INSVL.(AD.HDR,FP.NFH) + INSVL.(AD.COP,FP.FCY)
;DEFAULTS FOR INPUT QUEUE LOG FILE
INDADI: INSVL.(FILEAS,FP.FFF) + INSVL.(SPACSI,FP.FSP) + INSVL.(AD.LFD,FP.DEL) + INSVL.(1,FP.FLG) +INSVL.(AD.HDR,FP.NFH) + INSVL.(1,FP.NEW) + INSVL.(AD.COP,FP.FCY)
;HERE TO SUPPLY DEFAULTS FOR GLOBAL SWITCHES
;
SWDEF: SKIPE CREFLG ;SEE IF /MODIFY
JRST SWDEF2 ;YES--SKIP DEFAULT SWITCHES
MOVSI T1,-S.EMIN+S.MIN-1 ;INITIALIZE LOOP
SWDEF1: MOVE T2,SWDEFT(T1) ;GET DEFAULT
MOVE T3,S.MIN(T1) ;GET VALUE ENTERRED
CAMN T3,[-1] ;SEE IF ANYTHING TYPED
MOVEM T2,S.MIN(T1) ;YES--STUFF DEFAULT
AOBJN T1,SWDEF1 ;LOOP BACK FOR MORE
JUMPLE J,SWDEF2 ;JUMP IF /LIST OR INP:
MOVE T2,@SWLDT(J) ;GET ALTERNATE LIMIT VALUE
SKIPG S.LIM ;WAS /LIM SET?
MOVEM T2,S.LIM ;NO, SAVE ALTERNATE VALUE
SWDEF2: SKIPE T1,S.JOB ;GET REQUESTED JOB NAME
;(IF THERE IS ONE)
CAMN T1,[-1] ;IF ITS -1,,DONT SAVE IT
SKIPA ;0 OR -1,,SKIP
MOVEM T1,O.NAM ;SAVE IT FOR LATER
SKIPGE S.SEQ ;SEE IF SEQUENCE STILL NOT SET
SETZM S.SEQ ; RIGHT--SET IT FOR /MOD/KILL
SKIPLE T1,S.COR ;/CORE SPECIFIED ?
JRST SWDEF3 ;YES,,ADJUST IT
SKIPN CREFLG ;/MODIFY ???
SETZM S.COR ;NO,,ASSUME DEFAULT
JRST SWDEF4 ;AND SKIP REST
SWDEF3: CAIGE T1,^D256 ;SEE IF ALREADY IN WORDS
LSH T1,^D10 ;NO--ADD K FACTOR
MOVEM T1,S.COR ;STORE RESULT
SWDEF4: SKIPN DEFFIL+.FXDEV ;SEE IF /PATH
JRST SWDEF5 ;NO--PROCEED
SKIPN DEFFIL+.FXNAM ;SEE IF /PATH:NAME
.CREF FX.NDV
SKIPL DEFFIL+.FXMOD ; OR /PATH:DEV:
JRST E.PTHN ;ERROR IF SO
SKIPE DEFFIL+.FXEXT ; OR /PATH:.EXT
JRST E.PTHN ;ERROR IF SO
SWDEF5: SKIPE CREFLG ;SEE IF /MODIFY
POPJ P, ;YES--RETURN
JUMPL J,.POPJ ;GO PROCESS IF /LIST
JUMPN J,SWDEF7 ;JUMP IF NOT INPUT QUEUE
MOVX T1,FX.DIR ;GET [] BIT
TDNE T1,DEFFIL+.FXMOM ;SEE IF /PATH:[]
JRST SWDEF6 ;YES--JUST CHECK NOT WILD
MOVE T2,.MYPPN## ;NO--GET SELF
SKIPN O.DIR+2 ;SEE IF NOT OUTPUT SFD
CAME T2,O.DIR ;SEE IF MATCHES OUTPUT P,PN
TDNN T1,O.MODM ;OR NO OUTPUT P,PN
JRST SWDF51 ;RIGHT--USE DEFAULT DIRECTORY
MOVE T1,[O.DIR,,DEFDIR] ;NO--COPY
BLT T1,DEFDIR+2*.FXLND-1 ;OUTPUT DIRECTORY
JRST SWDEF6 ;THEN CHECK FOR NO WILD-CARDS
SWDF51: MOVSI T2,-.FXLND ;GET LOOP COUNT
MOVEI T3,0 ;AND STORE INDEX
SWDF52: SKIPN T1,PTHPPN(T2) ;GET DEFAULT PATH
SOS T2 ;DEFEAT ADVANCE IF DONE
MOVEM T1,DEFDIR(T3) ;STORE IN /PATH
SETOM DEFDIR+1(T3) ;CLEAR WILDCARDS
ADDI T3,2 ;ADVANCE STORE
AOBJN T2,SWDF52 ;LOOP UNTIL DONE
SWDEF6: MOVE T1,DEFDIR ;GET UFD
SKIPN T2,O.DIR ;GET OUTPUT DIRECTORY
MOVE T2,.MYPPN## ;DEFAULT TO LOGGED IN DIRECTORY
TLNN T1,-1 ;SEE IF PROGRAMMER
HLL T1,T2 ;NO--DEFAULT
TRNN T1,-1 ;SEE IF PROGRAMMER
HRR T1,T2 ;NO--DEFAULT
MOVEM T1,DEFDIR ;STORE AWAY
MOVSI T2,-.FXLND ;SET LOOP COUNT
SWDF61: SKIPN DEFDIR(T2) ;SEE IF NEXT LEVEL SPECIFIED
JRST SWDEF7 ;NO--ALL OK
SETCM T1,DEFDIR+1(T2) ;GET COMPLEMENT OF WILD MASK
JUMPN T1,E.PTHW ;ERROR IF WASN'T -1
INCR T2 ;ADVANCE BY 2
AOBJN T2,SWDF61 ;LOOP OVER FULL DEPTH
SWDEF7: MOVE I,I.INZR ;DEFAULT JOB NAME IS FIRST FILE NAME
CAIN J,0 ;UNLESS INPUT QUEUE
ADDI I,I.LZER ;FOR WHICH IT IS LOG FILE
SETCM T1,.FXNMM(I) ;SEE IF WILDCARD IN FILE
JUMPN T1,.POPJ ;YES--JUST PROCESS
MOVE T1,.FXNAM(I) ;NO--GET FILE NAME IN CASE
SKIPN O.NAM ;SEE IF OUTPUT NAME YET
MOVEM T1,O.NAM ;NO--SET THIS ONE
POPJ P, ;RETURN
SUBTTL Definition of Switch Accumulation Area and Default Values
;EACH ENTRY IN QSM MACRO IS:
; SMX SWITCH-LOCATION,DEFAULT
;
DEFINE QSM,<
SMX S.ACCT,-1
MSC 7 ;SEVEN MORE - TOTAL OF EIGHT
SMX S.AFT,0
SMX S.ALLF,-1
SMX S.ASST,ASSTYES
;*** S.ATTR AND S.UNTY MUST BE ADJACENT ***
SMX S.ATTR,-1 ;ATTRIBUTES
SMX S.UNTY,-1 ;UNIT TYPE
SMX S.BATL,BATLAPPEND
SMX S.BATO,-1
IFN FTDQS,<
SMX S.CHAR,0
MSC CHRSIZ-1
>; END IFN FTDQS
SMX S.CHK,-1
SMX S.COR,-1
SMX S.DFR,-1
SMX S.DEST,-1
SMX S.DIST,-1
MSC 7
SMX S.DPN,0
SMX S.FRM,0
IFN FTDQS,<
MSC FRMSIZ-1 ;A FEW MORE WORDS
>; END IFN FTDQS
SMX S.JOB,0
SMX S.LCDP,0
SMX S.LIM,0
SMX S.LIST,-1
SMX S.LLPT,0
SMX S.LPLT,0
SMX S.LPTP,0
SMX S.LPAT,0 ;PATCH LIMIT
SMX S.LTIM,0
SMX S.NOS1,0
SMX S.NOS2,0
SMX S.NTF,-1
SMX S.NULL,0
SMX S.OPN,0
SMX S.OUT,-1
SMX S.PRI,-1
SMX S.PROC,-1
IFN FTDQS,<
SMX S.QNM,0
MSC QNMLEN-1
>; END IFN FTDQS
SMX S.RSTR,AD.RST
SMX S.RDR,-1
IFN FTDQS,<
SMX S.RMT,-1
>; END IFN FTDQS
SMX S.RID,0
SMX S.SEQ,0
SMX S.SPAC,-1
SMX S.UNIQ,-1
SMX S.USER,-1
MSC 7
> ;END DEFINE QSM
DEFINE MSC(A)<
BLOCK A
>
S.LINP==0 ;DUMMY
S.NOT==S.NOS1
SUBTTL Default Switch Table Values
;FIRST DEFINE THE TABLE OF DEFAULTS
;
DEFINE SMX(A,B),<
XLIST
EXP B
LIST
SALL
>
SWDEFT: QSM
;NOW DEFINE THE ACCUMULATION TABLE
;
DEFINE SMX(A,B,C),<
XLIST
A: BLOCK 1
LIST
SALL
>
SWSEG ;SWITCH TO LOWSEG
S.MIN:! QSM
S.EMIN==.-1
SWSEG ;SWITCH BACK TO HISEG
XALL
;LOCATIONS OF INDIVIDUAL QUEUE LIMITS
DEFINE QQ(A,B),<
EXP S.L'A
>
SWLDT: QUEUES
SALL
SUBTTL File Scanning Error Messages
E.NOD: MOVE N,O.DEV
N$FATE <CDO>,<N>,<Can not do output to device>
E.NDD: MOVE N,.FXDEV(I)
N$FATE <DND>,<N>,<Input device not a disk>
E.WCI: MOVE N,.FXNAM(I)
N$FATE <WIQ>,<N>,<Wildcard illegal in input queue file name>
E.WDI: N$FATE <WDI>,,<Wildcard illegal in input queue file directory>
E.WXI: HLLZ N,.FXEXT(I)
N$FATE <WIE>,<N>,<Wildcard illegal in input queue file extension>
E.NNI: N$FATE <FRI>,,<Filename required for input queue>
E.QSFD: N$FATE <UCI>,,<Queue user cannot include SFDs>
E.LSFD: N$FATE <LQU>,,<Listed queue user cannot include SFDs>
E.PTHN: N$FATE <FNI>,,<File name illegal in default path>
E.PTHW: N$FATE <WID>,,<Wildcard illegal in default path>
E.SJN: N$FATE <SJN>,,<Specify jobname left of equal sign>
E.NSD: MOVE N,.FXDEV(I)
N$FATE <NSD>,<N>,<Input device does not exist>
E.WIN: N$FATE <WIN>,,<Wildcards illegal with /NEW>
SUBTTL Other Error Messages
E.OEFE: CLOSE LC,CL.RST!CL.ACS!CL.DLL ;RESET ENTER
RELEAS LC, ;CLEAR CHANNEL
MOVEI T1,L.LOOK ;POINT TO LOOKUP BLOCK
MOVEI T2,LN$ENT-1 ;GIVE LENGTH
MOVEI T3,O.ZER ;POINT TO SCAN BLOCK
PUSHJ P,E.LKEN## ;ISSUE ERROR MESSAGE
PJRST NFMSX1 ;GO ABORT JOB
E.NFLS: SKIPLE S.NULL ;NO FILES--SEE IF MESSAGE SUPPRESSED
PJRST CMDXIT ;YES--JUST QUIT
N$FATE <NFI>,,<No files in request>
E.ICMD: HRRZ N,I
N$FATE <ICC>,<D>,<Improper command code>
E.NOQS: N$FATE <NQS>,,<No queue specified>
E.SVTL: N$FATE <SVT>,<D>,<Switch value too large>
E.IQNN: MOVE N,O.DEV ;GET THE DEVICE
E.IQN: N$FATE <IQN>,<N>,<Illegal queue name>
SUBTTL COMMND Command Processing
;COMMND -- SUBROUTINE TO PROCESS COMMAND
;USES EVERYTHING
;HERE AFTER COMMAND HAS BEEN DECODED AND ALL DEFAULTS SUPPLIED
;DISPATCH TO APPROPRIATE COMMAND PROCESSOR
;
COMMND: SKIPLE I,S.OPN ;FETCH OPERATION CODE, CHECK FOR LEGAL
CAILE I,LCDT ;CHECK FOR VALIDITY
JRST E.ICMD ;NO--BOMB THE USER
MOVE T1,DQTYPE ;GET COMMAND-DEVICE
MOVEM T1,COMDEV ;AND SAVE FOR LATER
SETZM T.ZER ;ZERO OUT TEMPORARIES
MOVE T1,[T.ZER,,T.ZER+1] ; ..
BLT T1,T.EZER ; ..
MOVE T1,COMDEV ;GET THE DEVICE BACK
MOVEM T1,DQTYPE ; AND RESTORE IT (ZAP'D BY ABOVE BLT)
MOVS T1,COMDEV ;GET DEVICE NAME IN RH
CAIN T1,'PAT' ;PATCHING?
SKIPA T1,PATCMD ;YES
MOVE T1,CDTAB-1(I) ;GET ADDRESS AND CONTROL BITS
SKIPLE S.DFR ;WAS /DEFER SPECIFIED?
HRRI T1,NDEFER ;YES, DISPATCH TO DEFER ROUTINE
TLNE T1,(NNLGSB) ;SEE IF ERROR AS SUBJOB
TLNN F,L.NSBJ ;NO--SEE IF TOP IS LOGGED IN
SKIPA ;YES--LEAVE ALONE
TLO T1,(NNLGI) ;NO--INDICATE ERROR
TLNN F,L.LOGI ;SEE IF LOGGED IN
TLNN T1,(NNLGI) ;NO--SEE IF LEGAL IF NOT
JRST (T1) ;YES--GO DO IT
MOVE N,CMDTAB-1(I) ;ILLEGAL--ABORT
N$FATE <LFS>,<N>,<LOGIN please to use switch>
;TABLE OF DISPATCH ADDRESSES FOR VARIOUS COMMANDS
;
NNLGI==1B1 ;NOT LEGAL UNLESS LOGGED IN
NNLGSB==1B2 ;NOT LEGAL UNLESS LOGGED IN -
;AT TOP LEVEL
CDTAB:
EXP NCREAT+NNLGI ;1=CREATE ENTRY
EXP 0 ;2 WAS /DEFER
EXP 0 ;3 WAS /ZDEFER
EXP NLIST ;4=LIST QUEUE
EXP NMODFY+NNLGSB ;5=MODIFY EXISTING ENTRY
EXP NKILL+NNLGSB ;6=KILL EXISTING ENTRY
LCDT==.-CDTAB
CMDTAB: SIXBIT /CREATE/
EXP 0,0
SIXBIT /LIST/
SIXBIT /MODIFY/
SIXBIT /KILL/
SUBTTL NCREAT New CREATE Queue Request - Input or Output
NCREAT: MOVNI T1,I.LZER ;COMPUTE START
ADD T1,I.NXZR ;OF LAST SPEC
MOVEM T1,I.LSZR ;FOR WILD
;SET UP THE MESSAGE AREA
;
PUSH P,.JBFF## ;SAVE ORIGINAL .JBFF
PUSHJ P,MSETUP ;GET MEMORY ETC FOR MESSAGE
;CREATE MESSAGE HEADER
;
MOVX T1,EQHSIZ ;SIZE WITH PATH
STORE T1,.EQLEN(M),EQ.LOH ;STORE LENGTH OF REQUEST HEADER
STORE T1,.MSTYP(M),MS.CNT ;AND AS INITIAL MESSAGE LENGTH
MOVX T1,.QOCRE ;FUNCTION CREATE
STORE T1,.MSTYP(M),MS.TYP ;AS MESSAGE TYPE
JUMPE J,CREATI ;IF INPUT QUEUE, GO DO IT
JRST CREATO ;NO, MUST BE OUTPUT QUEUE
SUBTTL CREATO New CREATE Output Queue Request
;BEGINNING OUT ROB BLOCK CODE
;OUT ROB OBJECT TYPE WORD CODE
;
CREATO: PUSHJ P,GETOBJ ;FIND THE OBJECT
STORE T3,.EQROB+.ROBTY(M) ;STORE OBJECT TYPE
;OUT ROB ATTRIBUTE WORD CODE
;
HLRZ T1,O.DEV ;GET THE DEVICE BACK
MOVEI T2,0 ;GET SOME ATTRIBUTES
CAIN T1,'LL ' ;IS IT LL?
MOVX T2,%LOWER ;YES,,LOAD LOWER CASE
CAIN T1,'LU ' ;OR LU?
MOVX T2,%UPPER ;YES,,LOAD UPPER CASE
STORE T2,.EQROB+.ROBAT(M),RO.ATR ;STORE IT
;OUT ROB UNIT WORD CODE (MPB)
;MAY OVER WRITE ATTRIBUTE WORD
;
HRRZ T3,O.DEV ;GET DEVICE ONCE MORE
JUMPE T3,CREO.1 ;MPB FORMAT FIELD ???
LDB T2,[POINT 6,T3,23] ;YES, GET 4TH DIGIT
CAIN T2,'S' ;STATION SPECIFICATION?
JRST CREO.1 ;YES, NO MPB UNIT VALUE
LDB T1,[POINT 6,T3,35] ;GET THE 6TH CHAR
TXNN T3,7700 ;IS THERE A NODE FIELD?
LDB T1,[POINT 6,T3,23] ;NO, GET 4TH DIGIT
JUMPE T1,CREO.1 ;GO IF NO UNIT
SUBI T1,'0' ;ELSE, GET A UNIT
TXO T1,RO.PHY ;SET PHYSICAL UNIT BIT
STORE T1,.EQROB+.ROBAT(M) ;AND STORE UNIT NUMBER
;OUT ROB /LOWER, /UPPER, AND /UNIT SWITCH CODE (GALAXY)
;MAY OVER WRITE ATTRIBUTE WORD
;
CREO.1: DMOVE T1,S.ATTR ;GET ATTRIBUTES
CAME T1,[-1] ;GALAXY ATTRIBUTE SWITCH ???
MOVEM T1,.EQROB+.ROBAT(M) ;YES, STORE /UNIT IN MESSAGE
CAME T2,[-1] ;UNIT TYPE?
MOVEM T2,.EQROB+.ROBUT(M) ;YES
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;OUT ROB NODE WORD CODE GALAXY /DEST AND MPB
;
HRROI T4,.GTLOC ;SETUP TO GET MY LOCATION
GETTAB T4, ;GET IT
MOVEI T4,0 ;LOSE
HRRZ T3,O.DEV ;GET DEVICE ONCE MORE
JUMPE T3,CREO.2 ;MPB FORMAT FIELD ???
TRNN T3,007777 ;YES, WAS UNIT ALONE SPECIFIED ???
JRST CREO.2 ;YES, SKIP THIS STUFF
LDB T1,[POINT 6,T3,23] ;NO, GET THE 4TH DIGIT
CAIN T1,'S' ;STATION SPECIFICATION?
JRST [LSH T3,6 ;YES--SHIFT IT OFF
TLZ T3,-1 ;CLEAR OVERFLOW
LDB T1,[POINT 6,T3,23];GET FIRST NODE DIGIT
JRST .+1] ;AND PROCEED
CAIL T1,'0' ;MUST BE NUMERIC
CAILE T1,'7' ;AND IN RANGE
JRST E.IQNN ;ELSE SAY ILLEGAL QUEUE
LDB T2,[POINT 6,T3,29] ;GET THE 5TH DIGIT
CAIL T2,'0' ;MUST BE NUMERIC
CAILE T2,'7' ;AND IN RANGE
JRST E.IQNN ;ELSE SAY ILLEGAL QUEUE
SUBI T1,'0' ;MAKE IT BINARY
SUBI T2,'0' ;BOTH OF THEM
IMULI T1,10 ;AND START BUILDING AN OCTAL NUMBER
ADD T1,T2 ;FINISH THE PROCESS
SKIPA ;USE MPB NODE INFO
CREO.2: MOVE T1,T4 ;GET THE DEFAULT
MOVE T2,S.DEST ;GET THE /DESTINATION NODE
CAMN T2,[-1] ;DID WE TYPE IT ???
JRST CREO.3 ;NO, STORE IN MESSAGE
MOVE T1,S.DEST ;GET THE /DESTINATION NODE
PUSHJ P,SETNODE ;CONVERT/DEFAULT THE NODE NAME/NUMBER
CAMN T1,[-1] ;SEE IF NO NETWORK SOFTWARE
SETZM T1 ;YES--MAKE THE NODE NUMBER 0
CREO.3: STORE T1,.EQROB+.ROBND(M) ;STORE IT
;END OF OUT ROB BLOCK CODE
;BUILD EQ BLOCK
;
PUSHJ P,NBLDEQ ;GO BUILD THE EQ BLOCK
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;BEGINNING OF LIMIT WORD CODE
;LIMIT WORD # 0
;
MOVE T1,S.FRM ;GET THE FORMS TYPE
STOLIM T1,.EQLIM(M),FORM ;PUT IT IN THE OUTPUT BLOCK
;LIMIT WORD # 1
;
SKIPG T1,S.LIM ;IS IT A REASONABLE LIMIT
SETZM T1 ;NO, INSURE ZERO
SKIPLE S.SPAC ;DO WE HAVE ABNORMAL SPACING ???
IMUL T1,S.SPAC ;YES, MULTIPLY THE LIMIT BY IT
CAILE T1,777776 ;CHECK TO LARGE
MOVEI T1,777776 ;FORCE OK
STOLIM T1,.EQLIM(M),OLIM ;STORE IN SECOND LIMIT WORD
;LIMIT WORDS # 2 AND 3
;
MOVE T1,S.NOS1 ;GET /NOTE SWITCH
STOLIM T1,.EQLIM(M),NOT1 ;STORE IN THIRD LIMIT WORD
MOVE T1,S.NOS2 ;GET /NOTE SWITCH
STOLIM T1,.EQLIM(M),NOT2 ;STORE IN FOURTH LIMIT WORD
;END OF LIMIT WORD CODE
;
IFN FTDQS,<
;QUEUE NAME
;
SKIPN S.QNM ;/QUEUE SPECIFIED?
JRST CREO.7 ;NO
MOVSI T1,S.QNM ;WHERE /QUEUE IS STORED
HRRI T1,.EQQNM(M) ;WHERE TO PUT IT
BLT T1,.EQQNM+QNMLEN-1(M) ;COPY TO EQ
;CHARACTERISTICS
;
CREO.7: SETZM .EQCHR(M) ;ZERO IT INITIALLY
SKIPN S.CHAR ;/CHARACTERISTICS SPECIFIED?
JRST CREO.8 ;NO
MOVSI T1,S.CHAR ;WHERE /CHARACTERISTICS IS STORED
HRRI T1,.EQCHR(M) ;WHERE TO PUT IT
BLT T1,.EQCHR+CHRSIZ-1(M) ;COPY TO EQ
;LONG FORMS NAME
;
CREO.8: MOVSI T1,.EQFRM(M) ;CLEAR IT OUT FIRST
HRRI T1,.EQFRM+1(M) ;...
SETZM .EQFRM(M)
BLT T1,.EQFRM+FRMSIZ-1(M)
SKIPN S.FRM ;/FORMS SPECIFIED?
JRST CREO.9 ;NO
MOVE T1,[POINT 6,S.FRM] ;SOURCE BYTE POINTER
MOVEI T2,.EQFRM(M) ;DESTINATION
HRLI T2,(POINT 7) ;7-BIT BYTES
ILDB T3,T1 ;GET A BYTE
JUMPE T3,CREO.9 ;WHEN DONE
ADDI T3," "-' ' ;CONVERT TO ASCII
IDPB T3,T2 ;STORE IT
JRST .-4 ;LOOP
>; END IFN FTDQS
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;HERE TO ADD FB BLOCKS TO EQ REQUEST
;
CREO.9: SETZM I ;YES, SETUP CALL TO NLKFIL
CREO.4: LOAD T1,.MSTYP(M),MS.CNT ;CHECK FOR PAGE OVERFLOW
ADDI T1,FBSIZE ;SIZE IF I INCLUDE THIS FILE
CAILE T1,PAGSIZ ;OVER A PAGE BOUNDRY
PUSHJ P,CREO.6 ;YES, START A NEW MESSAGE
LOAD FP,.MSTYP(M),MS.CNT ;GET CURRENT SIZE
ADDI FP,(M) ;FP = FILE BLOCK LOCATION IN REQUEST
PUSHJ P,NLKFIL ;CREATE THE GALAXY FB BLOCK
JRST CREO.5 ;SEND THE MESSAGE
INCR .EQSPC(M),EQ.NUM ;BUMP NR. FILES IN REQUEST
CLOSE DC,CL.NMB ;KEEP ACCESS TABLE IN CORE
RELEAS DC, ;RELEASE THE CHANNEL
JRST CREO.4 ;GET ANOTHER GALAXY FB BLOCK
CREO.5: LOAD T1,.EQSPC(M),EQ.NUM ;GET NUMBER FILES IN REQUEST
JUMPG T1,CRESND ;ARE THERE FILE IN REQUEST ???
DECR NUMANS ;NO FILES IN THIS REQUEST
MOVE T1,NUMANS ;GET THE NEW REQUEST COUNT
JUMPG T1,CRESND ;ANY FULL REQUESTS TO DISPATCH ???
JRST E.NFLS ;NO FILES OR REQUESTS TO SEND
;ROUTINE TO BUILD ADDITIONAL REQUESTS
;COPY EQ HEADER, ROB, ETC.
;
CREO.6: PUSH P,M ;SAVE CURRENT REQUEST ADDR
PUSHJ P,MSUP.1 ;GET MEMORY ETC FOR NEW REQUEST
POP P,T1 ;RESTORE OLD REQUEST ADDR BACK
HRLI T2,(T1) ;LOAD OLD REQUEST ADDR FOR BLT
HRRI T2,(M) ;AND NEW REQUEST ADDR
BLT T2,EQHSIZ-1(M) ;BLT OLD EQ, ROB, ETC. TO NEW REQUEST
;LET'S FIX UP THE JOBNAME
;
MOVEI T2,EQHSIZ(T1) ;GET ADDR OF OLD MSG FST FB BLK
LOAD T3,.FPLEN(T2),FP.LEN ;GET FP BLOCK SIZE
ADD T2,T3 ;POINT TO FD BLOCK
MOVE T3,.EQJOB(T1) ;GET THE JOBNAME
SKIPN T3 ;USER SPECIFY JOBNAME ???
MOVE T3,.FDNAM(T2) ;GET FIRST FILE NAME IN FIRST MSG
MOVEM T3,.EQJOB(T1) ;PUT JOBNAME BACK IN ORIGINAL MSG
MOVEM T3,.EQJOB(M) ;AND STORE JOBNAME IN NEW REQUEST
;RESET LENGTH OF REQUEST
;
MOVX T1,EQHSIZ ;SIZE WITH PATH
STORE T1,.EQLEN(M),EQ.LOH ;STORE LENGTH OF REQUEST HEADER
STORE T1,.MSTYP(M),MS.CNT ;AND AS INITIAL MESSAGE LENGTH
;RESET NUMBER OF FILES IN REQUEST
;
SETZM T1 ;GET READY TO
STORE T1,.EQSPC(M),EQ.NUM ;ZERO NUMBER FILES IN REQUEST
POPJ P, ;BACK TO THE FB BLOCKS
SUBTTL CREATI New CREATE Input Queue Request
;BEGINNING INP ROB BLOCK CODE
;
CREATI: PUSHJ P,GETOBJ ;FIND THE OBJECT
STORE T3,.EQROB+.ROBTY(M) ;STORE OBJECT TYPE
PUSHJ P,DFPROC ;DEFAULT /PROC IF NOT GIVEN
MOVE T1,S.PROC ;LOAD /PROC
PUSHJ P,SETNODE ;CONVERT IT
CAMN T1,[-1] ;MONITOR SUPPORT NETWORK ???
SETZM T1 ;YES,,MAKE THE NODE NUMBER 0
MOVEM T1,.EQROB+.ROBND(M) ;SAVE IT IN THE ROB
LOAD T1,S.ATTRIB,RO.ATR ;GET ATTRIBUTES
CAXE T1,%SITGO ;IS IT SITGO ???
MOVX T1,%GENRC ;NO, MUST BE GENRIC
STORE T1,.EQROB+.ROBAT(M),RO.ATR ;SAVE THE ATTRIBUTE
SETZM .EQROB+.ROBUT(M) ;UNIT TYPE IS MEANINGLESS FOR INPUT
;END OF INP ROB BLOCK CODE
;BUILD EQ BLOCK
;
PUSHJ P,NBLDEQ ;GO BUILD THE EQ BLOCK
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;BEGINNING OF LIMIT WORD CODE
;LIMIT WORD # 0
;
SKIPL T1,S.UNIQ ;/UNIQUE SWITCH ???
JRST CREI.1 ;YES, PROCESS THE SWITCH
SETZM T1 ;ZERO THE UNIQUE BITS
JRST CREI.2 ;GO SAVE THE /UNIQUE VALUE
CREI.1: CAIG T1,2 ;WAS IT :0 OR :NO ???
MOVEI T1,%EQUNO ;MAKE IT :NO
CAILE T1,2 ;OR WAS IT :1 OR :YES ???
MOVEI T1,%EQUYE ;MAKE IT :YES
CREI.2: STOLIM T1,.EQLIM(M),UNIQ ;AND STORE AWAY
SETZM T1
STOLIM T1,.EQLIM(M),BSPR ;CLEAR SPARE BITS
MOVX T1,%EQRNO ;ASSUME /REST:NO
SKIPE S.RSTR ;IS IT /REST:NO ???
MOVX T1,%EQRYE ;NO, SO IT'S /REST:YES
STOLIM T1,.EQLIM(M),REST ;AND STORE IT
SKIPGE T1,S.OUT ;GET OUTPUT QUEUEING
MOVEI T1,INPLOG ;DEFAULT TO /OUTPUT:LOG
STOLIM T1,.EQLIM(M),OUTP ;AND STORE THE VALUE
HRRZ T1,S.DPN ;GET DEPENDENCY REQUEST
TRZ T1,MI.DMT ;CLEAR +- FLAGS
STOLIM T1,.EQLIM(M),DEPN ;STORE /DEPENDENCY SWITCH
MOVE T1,S.ASST ;/ASSIST SPECIFIED ???
STOLIM T1,.EQLIM(M),OINT ;STORE IT AWAY
;LIMIT WORD # 1
;
SKIPLE T1,S.COR ;/CORE SPECIFIED ?
JRST CREI.3 ;YES,,ADJUST IT
SETZM T1 ;NO,,ASSUME DEFAULT
JRST CREI.4 ;AND SKIP REST
CREI.3: CAIGE T1,^D256 ;SEE IF ALREADY IN WORDS
LSH T1,^D10 ;NO--ADD K FACTOR
ADDI T1,PAGSIZ-1 ;ROUND UP TO A PAGE BOUNDRY
ADR2PG T1 ;CONVERT TO PAGES
CREI.4: STOLIM T1,.EQLIM(M),CORE ;STORE /CORE:pages
HRR T1,S.LTIM ;FETCH CPU TIME LIMIT
HLRZ T2,S.LTIM ;GET LEFT HALF OF THE LIMIT
CAIE T2,-1 ;IF -1
JUMPN T2,[HRRI T1,-2 ;OR 0, IGNORE IT, ELSE LOAD "INFIN"
JRST .+1] ;AND CONTINUE
STOLIM T1,.EQLIM(M),TIME ;STORE /TIME:seconds
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;LIMIT WORD # 2
;
MOVE T1,S.LLPT ;FETCH PAGE LIMIT
STOLIM T1,.EQLIM(M),SLPT ;STORE SPOOLED LPT LIMIT
MOVE T1,S.LCDP ;FETCH CARD PUNCH LIMIT
STOLIM T1,.EQLIM(M),SCDP ;STORE SPOOLED CDP LIMIT
;LIMIT WORD # 3
;
MOVE T1,S.LPTP ;FETCH PAPER TAPE LIMIT
STOLIM T1,.EQLIM(M),SPTP ;STORE SPOOLED PTP LIMIT
MOVE T1,S.LPLT ;FETCH PLOT LIMIT
STOLIM T1,.EQLIM(M),SPLT ;STORE SPOOLED PLT LIMIT
;LIMIT WORD # 4
;
HRRZ T1,O.DEV ;CHECK FOR MPB INPnn: OR INPSnn:
JUMPE T1,CREI.5 ;WELL, DO WE HAVE ONE ???
TRNN T1,007777 ;YES, DID THEY SPECIFY A UNIT ???
JRST CREI.5 ;YES, IGNORE IT
SETZM S.DEST ;CLEAR THE DEST NODE WORD
LDB T2,[POINT 6,T1,23] ;GET THE FIRST NODE CHARACTER
CAIN T2,'S' ;STATION SPECIFIED ???
JRST [LSH T1,6 ;YES, SO SHIFT IT OFF
TLZ T1,-1 ;CLEAR ANY OVERFLOW
LDB T2,[POINT 6,T1,23];GET NODE CHARACTER AGAIN
JRST .+1] ;FALL BACK INTO MAIN CODE
CAIL T2,'0' ;NO, IS IT NUMERIC
CAILE T2,'7' ;AND THE RANGE VALID ???
JRST E.IQNN ;NO, GIVE AN ERROR MESSAGE
DPB T2,[POINT 6,S.DEST,5] ;YES, STORE THE BITE
LDB T2,[POINT 6,T1,29] ;GET SECOND CHARACTER
CAIL T2,'0' ;NO, IS IT NUMERIC
CAILE T2,'7' ;AND THE RANGE VALID ???
JRST E.IQNN ;NO, GIVE AN ERROR MESSAGE
DPB T2,[POINT 6,S.DEST,11] ;YES, STORE THE BITE
CREI.5: PUSHJ P,DFDEST ;DEFAULT /DESTINATION IF NOT GIVEN
MOVE T1,S.DEST ;LOAD /DESTINATION
PUSHJ P,SETNODE ;CONVERT IT
CAMN T1,[-1] ;NO NETWORK SUPPORT IN THIS MONITOR ???
SETZM T1 ;YES,,MAKE THE NODE NUMBER 0
STOLIM T1,.EQLIM(M),ONOD ;AND STORE AWAY
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;LIMIT WORD # 5
;
MOVE T1,S.BATL ;GET THE LOG FILE TYPE CODE
STOLIM T1,.EQLIM(M),BLOG ;AND STORE AWAY
SKIPE T1,MADFIL ;GET THE 'MADE A FILE' FLAG
STOLIM T1,.EQLIM(M),DLOG ;SET DEFAULT LOG BIT
;LIMIT WORD # 6
;
MOVE T1,S.BATO ;GET /BATOPT
CAME T1,[EXP -1] ;SPECIFIED ???
STOLIM T1,.EQLIM(M),OPTN ;YES, STORE IT IN MESSAGE
;END OF LIMIT WORD CODE
;
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;BEGINNING PATH BLOCK CODE
;
MOVSI T1,-.FXLND ;SET FOR FULL LOOP COUNT
HRRI T1,(M) ;POINT TO REQUEST
MOVEI T2,0 ;INITIALIZE FETCH POINTER
CREI.6: SKIPE T3,DEFDIR(T2) ;GET /PATH:
ADDI T2,2 ;ADVANCE FETCH UNLESS AT END
MOVEM T3,.EQPAT(T1) ;STORE IN REQUEST
AOBJN T1,CREI.6 ;LOOP UNTIL DONE
;END OF PATH BLOCK CODE
;
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;HERE TO ADD FB BLOCKS TO EQ REQUEST
;
SETZM I ;SETUP CALL TO NLKFIL
CREI.8: LOAD FP,.MSTYP(M),MS.CNT ;GET CURRENT SIZE
ADDI FP,(M) ;FP = FILE BLOCK LOCATION IN REQUEST
PUSHJ P,NLKFIL ;CREATE THE GALAXY FB BLOCK
JRST CREI.9 ;SEND THE MESSAGE
INCR .EQSPC(M),EQ.NUM ;BUMP NR. FILES IN REQUEST
TXO F,R.ANUL ;ALLOW NUL: FOR LOGFILE
JRST CREI.8 ;GET ANOTHER GALAXY FB BLOCK
CREI.9: HLLZS F ;RESET LOG FILE FLAG
LOAD T1,.EQSPC(M),EQ.NUM ;GET NUMBER FILES IN REQUEST
CAIE T1,2 ;SEE IF EXACTLY TWO FILES
N$FATE <INF>,,<Incorrect number of files in input queue request>;NO
JRST CRESND ;DO THE SEND
SUBTTL CRESND New CREATE Message Send Routine
CRESND: SKIPN NUMANS ;ALL SENT YET
JRST CMDXIT ;YES, RETURN TO CALLER
JUMPE J,CSND.1 ;NO, IF INPUT QUEUE, GO DO IT
MOVE T1,NOBLKS ;GET COUNT OF BLOCKS QUEUED
CAILE T1,777777 ;HANDLE OVERFLOW
MOVEI T1,777777 ;YES--MAKE MAXIMUM
STOLIM T1,.EQLIM(M),NBLK ;STORE BLOCKS*COPIES IN 2ND LIMIT WORD
CSND.1: MOVE M,FSTMSG ;GET FIRST MESSAGE ADDRESS
MOVEI T3,PAGSIZ(M) ;THE NEXT ONE
MOVEM T3,FSTMSG ;SAVE FOR NEXT GO AROUND
DECR NUMANS ;ONE LESS TO SEND
MOVX T3,MF.ACK ;GET FLAG FOR ACKNOWLEDGMENT
MOVEM T3,.MSFLG(M) ;AND SET IT
MOVX T3,%%.QSR ;VERSION NUMBER OF THE MESSAGE
STORE T3,.EQLEN(M),EQ.VRS ;STORE FOR QUASAR
LOAD T3,.EQROB+.ROBTY(M) ;GET THE QUEUE TYPE
LOAD T4,S.RDR ;GET THE /RDR SWITCH
CAIN T3,.OTBAT ;WAS IT THE BATCH QUEUE
CAMN T4,[-1] ;YES, AND WAS /RDR SET ???
JRST SENDIT ;NO,,SEND THE MESSAGE
MOVX T3,.OTBIN ;YES,,GET THE SPRINT QUEUE ID
STORE T3,.EQROB+.ROBTY(M) ;RESET THE QUEUE TYPE
LOAD T3,.EQLEN(M),EQ.LOH ;GET THE HEADER LENGTH
ADD T3,M ;POINT TO THE FIRST FP
MOVX T4,.FPFSA ;GET 'STREAM ASCII' MODE
STORE T4,.FPINF(T3),FP.FFF ;SAVE THE THE FILE FORMAT
SENDIT: TXO M,1B0 ;SIGN BIT IS PAGE MODE FLAG
PUSHJ P,MSGSND ;SEND OFF TO QUASAR
PUSHJ P,RCVACK ;GET THE "ACK" NOW
JRST CRESND ;SEND ANOTHER IF THERE IS ONE
SUBTTL NBLDEQ New Build EQ Block Routine (INP/OUT)
NBLDEQ: SKIPN T1,O.DIR ;ANY PPN SPECIFIED ???
GETPPN T1, ;NO,,GET OURS
JFCL ;IGNORE THIS RETURN
MOVEM T1,.EQOID(M) ;AND MOVE IT INTO THE EQ
PUSHJ P,DOACCT ;FILL IN ACCOUNT STRING
DATAM O.NAM,,.EQJOB(M)
DATAM S.SEQ,,.EQSEQ(M),EQ.SEQ
DATAM O.MOD,FX.PRO,.EQSPC(M),EQ.PRO
DATAM S.NTF,,.EQSEQ(M),EQ.NOT
SKIPLE T1,S.AFT ;GET AFTER SWITCH
ADDI T1,3 ;ADD 1 SECOND
MOVEM T1,.EQAFT(M) ;MOVE THE AFTER PARAMETER
SKIPN T1,S.PRI ;/PRIORITY:0 SPECIFIED?
N$FATE <PZR>,,</PRIORITY:0 not in range 1 to 63> ;SEE YA
SKIPG T1 ;OK IF GREATER THAN ZERO
SETZM T1 ;OH....WELL, TAKE THE DEFAULT
STORE T1,.EQSEQ(M),EQ.PRI ;SAVE IT IN MESSAGE
DMOVE T1,G$NAM1 ;GET USER NAME
DMOVEM T1,.EQOWN(M) ;DEFAULT IT ...
MOVSI T1,S.USER ;POINT TO /USERNAME
HRRI T1,.EQUSR(M) ;MAKE A BLT POINTER
MOVE T2,S.USER ;GET FIRST WORD
CAME T2,[EXP -1] ;SPECIFIED?
BLT T1,.EQUSR+10-1(M) ;YES--COPY
MOVSI T1,S.DIST ;POINT TO /DISTRIBUTION
HRRI T1,.EQBOX(M) ;MAKE A BLT POINTER
MOVE T2,S.DIST ;GET FIRST WORD
CAME T2,[EXP -1] ;SPECIFIED?
BLT T1,.EQBOX+10-1(M) ;YES--COPY
POPJ P, ;AND RETURN
SUBTTL DOACCT Fill in the Accounting String
DOACCT: PUSHJ P,.SAVE3## ;SAVE P1, P2, AND P3 (N)
MOVX T1,%CNST2 ;WANT SECOND STATES WORD
GETTAB T1, ;GET IT
N$FATE <GUF>,,<GETTAB UUO Failed> ;NO,,END NOW
TXNN T1,ST%ACV ;IS ACCOUNT VALIDATION BEING DONE ???
POPJ P, ;NO,,SKIP THIS
MOVE T1,S.ACCT ;DID USER SPECIFY AN ACCOUNT STRING ???
CAME T1,[-1] ;LOOK FOR -1 (ACCT NOT SPECIFIED)
JRST DOAC.1 ;FOUND ONE,,GO PROCESS IT
;Here to default to user account string
;
DOAC.0: MOVE T1,[1,,T2] ;GET ACCT. PARMS
MOVEI T2,2 ;GET PARM BLOCK LENGTH
SETOM T3 ;WANT ACCOUNT STRING FOR THIS JOB
HRROI T4,.EQACT(M) ;GET POINTER TO WHERE WE WANT STRING PUT
ACCT. T1, ;READ THE ACCOUNT STRING INTO CREATE MSG
SETZM .EQACT(M) ;IT FAILED,,ZERO ACCOUNT STRING
POPJ P, ;RETURN
;Here to fill in account string specified by the user
;
DOAC.1: MOVSI T1,S.ACCT ;GET SOURCE ACCT STRING ADDRESS IN LEFT
HRRI T1,.EQACT(M) ;GET DESTINATION BLT ADDRESS IN RIGHT
BLT T1,.EQACT+12-1(M) ;COPY IT OVER
MOVX T1,QF.RSP+.QUVAL ;WANT RESPONSE+ACCOUNT VALIDATION
SETZM T2 ;NO NODE
MOVE T3,[1,,T1] ;WANT RESPONSE IN T1
MOVE T4,[10,,.QBACT] ;GET LENGTH,,TYPE
MOVEI P1,.EQACT(M) ;GET ACCOUNT STRING ADDRESS
MOVX P2,QA.IMM+.QBOID ;GET PPN BLOCK TYPE
MOVE N,.EQOID(M) ;GET THE OWNERS PPN
MOVE TF,[7,,T1] ;GET UUO BLOCK LEN,,ADDRESS
QUEUE. TF, ;REQUEST ACCOUNT VALIDATION
N$FATE <IAS>,,<Invalid account string specified>
POPJ P, ;RETURN
SUBTTL NLKFIL New Wild-Card LOOKUP Routine, Writes GALAXY Bits
;NLKFIL -- Routine to do wild card LOOKUP and build GALAXY CREATE BLOCK
;
;ENTER: With output block zeroed
;CALL:( MOVEI I,0 INITIALLY)
; MOVEI FP,ADDR. OF NEXT RESULT BLOCK
; PUSHJ P,NLKFIL
; ERROR RETURN IF NO MORE (MESSAGE ISSUED IF APPROPRIATE)
; SKIP RETURN IF FILE FOUND, THE APPROPRIATE FILE POINTERS
; WILL BE UPDATED IF NECESSARY TO POINT TO THE NEXT BLOCK
; MFD, UFD FILES WILL BE POSITIONED FOR NEXT TIME IN.
; THE .FDxxx BLOCK WILL BE BUILT AND APPENDED TO THE OUTPUT MESSAGE
;USES T1,T2,T3,T4,P1
;
NLKFIL: MOVE T1,[XWD WLDLEN, WLDARG] ;POINT AT .LKWLD ARGUMENTS
PUSHJ P,.LKWLD## ;GET NEXT WILD NAME
POPJ P, ;ALL DONE
MOVE P1,T1 ;SAVE T1 UNTIL FP IS DONE
;BUILD FP BLOCK
; .FPINF -- WORD # 1
;
NLK.FP: MOVE T4,I.MOD(I) ;GET FLAGS AND BITS
MOVEI T1,FILEASCII ;GET DEFAULT /FILE
HLRZ T2,RIBEXT ;GET EXTENSION
CAIN T2,'DAT' ;.DAT?
MOVEI T1,FILEFORTRAN ;YES, USE /FILE:FORT
TXNN T4,FP.FFF ;WAS IT ALREADY FILLED IN?
STORE T1,T4,FP.FFF ;NO, FILL IT IN
MOVEI T1,DISPPRES ;GET DEFAULT DISPOSITION
CAIN T2,'LST' ;IS IT A .LST FILE?
MOVEI T1,DISPDELE ;YES, LOAD DEFAULT
TXNN T4,FP.DSP ;WAS /DISP: ALREADY SET?
STORE T1,T4,FP.DSP ;NO, FILL IT IN
LOAD T1,T4,FP.NFH ;GET THE FILE HEADER BIT
SETCA T1, ;FLIP (WE STORE IT BACKWARDS IN I.MOD)
STORE T1,T4,FP.NFH ;SAVE IT
LOAD T1,T4,FP.DSP ;GET THE /DISP: VALUE
CAIE T1,DISPDELE ;WAS IT DELETE
TDZA T1,T1 ;NO, ZERO TEMP AND SKIP
MOVEI T1,1 ;YES, GET A BIT
STORE T1,T4,FP.DEL ;SET THE DELETE BIT CORRECTLY
LOAD T1,T4,FP.DSP ;GET THE /DISP: BITS
TXZ T4,FP.LOC ;CLEAR VARIOUS FLAGS
CAIN T1,DISPREN ;IS IT RENAME ???
TXO T4,FP.REN ;YES, SET THE BIT
MOVEM T4,.FPINF(FP) ;PUT .FPINF IN MESSAGE
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;FP BLOCK /TAG OR /BEGIN SWITCH
; .FPFST -- WORD # 2
;
NLFP.1: MOVE T1,I.STRT(I) ;GET /TAG OR /BEGIN SWITCH
JUMPE T1,NLFP.3 ;DID WE FIND ONE ???
JUMPE J,NLFP.2 ;YES, INPUT QUEUE ???
TLNE T1,770000 ;NO, IS IT SIXBIT ???
SETZM T1 ;YES ... IGNORE /TAG SWITCH
NLFP.2: MOVEM T1,.FPFST(FP) ;SAVE IN REQUEST
;FP BLOCK /REPORT SWITCH
; .FPFR1 -- WORDS # 3 AND 4
;
NLFP.3: SETCM T1,I.RPT(I) ;GET /REPORT SWITCH
JUMPE T1,NLFP.4 ;DID WE FIND ONE ???
DMOVE T1,I.RPT(I) ;GET /REPORT
DMOVEM T1,.FPFR1(FP) ;AND SAVE IT
;FP BLOCK /FONT SWITCH
; .FPFNM -- WORDS # 7 THRU 16
;
NLFP.4: MOVEI FD,FPMSIZ ;SET FP SIZE WITHOUT FONT BLOCK
SETCM T1,I.FONT(I) ;GET /FONT SWITCH
JUMPE T1,NLFP.5 ;DO WE HAVE ONE ???
HRLI T1,I.FONT(I) ;YES, GET ADDRESS /FONT NAME
HRRI T1,.FPFNM(FP) ;AND WHERE TO STORE IT
BLT T1,.FPFNM+FNMLTH-1(FP) ;STORE AWAY IN MESSAGE
MOVEI FD,FPXSIZ ;MAXIMUM FILE PARMS BLOCK
NLFP.5: STORE FD,.FPLEN(FP),FP.LEN ;STORE PARAMETERS SIZE IN CREATE
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;BUILD FD BLOCK
;
NLK.FD: ADDI FD,(FP) ;POINT TO WHERE FD BLOCK STARTS
JUMPN P1,NLK.F1 ;JUMP IF REAL DEVICE
MOVE T1,I.MOD(I) ;GET MOD WORD
TXNN T1,FP.NEW ;IF NON-EX-DEV, SEE IF /NEW
JRST E.NSD ;NO SUCH DEVICE
MOVSI T1,.FXLEN ;BLOCK LENGTH
HRRI T1,(I) ;BLOCK ADDRESS
MOVEI T2,OPNBLK ;OPEN BLOCK
MOVE T3,[LKBLKL,,LKBLK] ;LOOKUP BLOCK
PUSHJ P,.STOPN## ;ANY WILD CARDS?
JRST E.WIN
MOVE T1,OPNBLK+1 ;GET ARGUMENT DEVICE
MOVEM T1,.FDSTR(FD) ;STORE IT
MOVEM T1,RIBDEV ;AND HERE ALSO
MOVE T1,RIBNAM ;GET FILENAME
MOVEM T1,.FDNAM(FD) ;STORE IN REQUEST
MOVE T1,RIBEXT ;GET EXTENSION
HLLZM T1,.FDEXT(FD) ;STORE IN REQUEST
JRST NLK.PA ;AND MAKE BELIEVE THE LOOKUP FAILED
NLK.F1: TXNN P1,DV.DSK ;DOES IT THINK IT'S A DISK?
JRST E.NDD ;NO, NOT EVEN CLOSE
TXNE P1,DV.TTY ;YES, IF IT THINKS ITS A TTY, IT'S NUL:
TRZE F,R.ANUL ;YES, IT'S NUL:, DO WE ALLOW IT?
JRST NLK.LK ;YUP, HE'S GOLDEN
JRST E.NDD ;NO, LOSE BIG
;HERE WHEN LOOKUP BLOCK PREPARED FOR NEXT FILE
; AND IT IS TIME TO OPEN AND LOOK IT UP
NLK.LK: MOVE T1,OPNBLK+1 ;GET ARGUMENT DEVICE
MOVEM T1,.FDSTR(FD) ;STORE AS STRUCTURE
MOVE T1,RIBNAM ;GET FILE NAME
MOVEM T1,.FDNAM(FD) ;STORE IN REQUEST
MOVE T1,RIBEXT ;GET FILE EXTENSION
HLLZM T1,.FDEXT(FD) ;STORE IN REQUEST
OPEN DC,OPNBLK ;OPEN CHANNEL
JRST [PUSHJ P,E.DFO##
JRST NLKFIL]
MOVEI T4,PTHFCN ;POINT TO USER PATH
MOVX T2,FP.NEW ;GET /NEW BIT
TDNE T2,I.MOD(I) ;TEST THE FILE (IS IT THE /NEW?)
SKIPE RIBPPN ;YES, IS THERE A PPN SPECIFIED?
MOVE T4,RIBPPN ;YES, USE IT
MOVEM T4,RIBPPN ;USE THE CORRECT ONE
LOOKUP DC,LKBLK ;EXTENDED LOOKUP
JRST NLK.ER ;IF FAILURE
MOVEI T1,DC ;GET CHANNEL NUMBER
MOVEM T1,PTFFCN ;SET IN PATH BLOCK
MOVE T1,[.PTMAX,,PTFFCN]
PATH. T1, ;GET LOCATION FROM MONITOR
SETZM PTFPPN+1 ;CLEAR RESULT
MOVEI T1,PTFFCN ;POINT TO BLOCK
SKIPE PTFPPN+1 ;SEE IF SFDS
MOVEM T1,RIBPPN ;YES--POINT FROM LOOKUP
PUSHJ P,.CHKTM## ;CHECK /BEFORE/SINCE
JRST NLKFIL ;BAD--RECYCLE
PUSHJ P,ISBIN ;SEE IF BINARY AND IMPROPER
JRST NLK.BN ;YES--GIVE ERROR
SKIPE T4,RIBDEV ;GET UNIT NUMBER
MOVEM T4,.FDSTR(FD) ;STORE INTO REQUEST
MOVE T4,RIBSIZ ;GET LENGTH IN WORDS
ADDI T4,177 ;ROUND UP
ASH T4,-7 ;CONVERT TO BLOCKS
LOAD T3,I.MOD(I),FP.FCY ;GET REPEAT COUNT
SKIPN T3 ;FORCE NON-ZERO
MOVEI T3,1 ;YES
IMUL T3,T4 ;COMPUTE COMBINED TOTAL
ADDM T3,NOBLKS ;ADD TO ACCUMULATED TOTAL
MOVX T3,FP.NEW ;GET THE /NEW BIT
ANDCAM T3,I.MOD(I) ;AND TURN IT OFF
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;VERIFY STRUCTURE NAME
;
NLK.ST: MOVE T1,.FDSTR(FD) ;GET FILE STRUCTURE
DEVNAM T1, ;GET THE REAL NAME
JRST NLK.PA ;FAILED ASSUME NON-EXISTANT
MOVEM T1,STRBLK+.DCNAM ;CONVERT UNIT TO STRUCTURE
MOVE T1,[.DCSNM+1,,STRBLK] ;SET ARGUMENTS FOR DSKCHR
DSKCHR T1, ;DO THE CONVERSION AS I$MSTR DOES
JRST NLK.PA ;FAILED, ASSUME NON-EXISTANT
JUMPE T1,NLK.PA ;IF WORKED BUT NO ANSWER, MUST BE NUL:
MOVE T2,STRBLK+.DCSNM ;GET STR NAME CONTAINING THIS UNIT
TXNN T1,DC.TYP ;IF RETURNED TYPE IS ZERO, THEN
JRST [TRZN F,R.ANUL ;ALLOW 'NUL:', IS IT LOG FD ?
N$FATE <CSG>,,<Cannot Specify Generic Disk> ;NO, FAIL PRONTO
MOVE T2,FDCSTR ;YES, GET FD CTL STR NAME
JRST .+1] ;CONTINUE ....
MOVEM T2,.FDSTR(FD) ;STORE IT BACK IN DATA BASE
MOVEM T2,FDCSTR ;SAVE THE FD'S STRUCTURE
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;FD PATH BLOCK
;
NLK.PA: SETZM .FDPPN(FD) ;CLEAR OUT DIRECTORY
HRLI T1,.FDPPN(FD) ; ..
HRRI T1,.FDPAT(FD) ; ..
BLT T1,.FDPPN+.FXLND-1(FD) ; ..
SKIPN T1,RIBPPN ;GET LOOKUP DIRECTORY
MOVEI T1,PTHFCN ;UNKNOWN--GET DEFAULT
TLNE T1,-1 ;SEE IF SFD
SKIPA T2,T1 ;NO--GET UFD
MOVE T2,.PTPPN(T1) ;YES--GET UFD
MOVEM T2,.FDPPN(FD) ;SAVE IN QUEUE REQUEST
MOVEI T4,FDMSIZ ;AT LEAST A SHORT DESCRIPTOR
STORE T4,.FDLEN(FD),FD.LEN ;SAVE THAT SIZE
TLNE T1,-1 ;SEE IF SFDS
JRST NLK.EX ;NO--DONE WITH DIRECTORY
MOVEI T2,.FDPAT(FD) ;YES--POINT TO SFDS IN QUEUE REQUEST
HRLI T2,1-.FXLND ;COUNT NUMBER OF SFDS
NLK.P1: SKIPN T3,.PTPPN+1(T1) ;GET NEXT SFD
JRST NLK.EX ;ALL DONE
MOVEM T3,(T2) ;STORE IN REQUEST
INCR T1 ;ADVANCE FETCH
LOAD T4,.FDLEN(FD),FD.LEN ;PICK UP FD LENGTH
INCR T4 ;ADD 1 TO IT
STORE T4,.FDLEN(FD),FD.LEN ;AND SAVE IT
AOBJN T2,NLK.P1 ;LOOP OVER STORE
;NLKFIL EXIT ROUTINE
;
NLK.EX: LOAD T1,.FDLEN(FD),FD.LEN ;GET LENGTH OF FD
LOAD T2,.FPLEN(FP),FP.LEN ;GET FP AREA LENGTH
ADDI T2,(T1) ;T2 = LENGTH OF AREA TO INCLUDE
LOAD T1,.MSTYP(M),MS.CNT ;GET CURRENT SIZE
ADDI T1,(T2) ;T1 = LENGTH INCLUDING THIS FILE
STORE T1,.MSTYP(M),MS.CNT ;STORE NEW LENGTH
JRST .POPJ1## ;IF SUCCESS RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;HERE WHEN LOOKUP FAILS--SEE IF .NULL NEEDED OR /NEW SWITCH
;
NLK.ER: MOVEM T4,RIBPPN ;RESTORE DIRECTORY
HRRZ T2,RIBEXT ;GET LOOKUP ERROR CODE
JUMPN T2,NLK.BD ;GO ISSUE ERROR
SETZM RIBPRV ;CLEAR PROTECTION, ET
CAMN I,I.INZR ;IS THIS THE FIRST SPEC?
CAIE J,QTPINP ;AND BATCH?
JRST NLK.E2 ;NO
MOVE T3,I.MOD(I) ;GET SWITCHES
TXNE T3,FP.NEW ;SEE IF /NEW
JRST NLK.E3 ;YES--LET THIS ONE THROUGH
MOVSI T1,'DSK' ;DEFAULT
CAME T1,.FXDEV(I) ; DEVICE?
JRST NLK.BD ;NO--GIVE UP
MOVSI T1,'CTL' ;ERSATZ DEVICE CTL
MOVEM T1,.FXDEV(I) ;STUFF IN SCAN BLOCK
MOVEM T1,OPNBLK+1 ;PUT IN OPEN BLOCK
JRST NLK.LK ;LOOP BACK AND TRY AGAIN
NLK.E2: MOVE T3,I.MOD(I) ;GET SWITCHES
TXNN T3,FP.NEW ;SEE IF /NEW
JRST NLK.BD ;NO--ERROR
NLK.E3: TRNN F,R.ANUL ;*.LOG FILE FD ???
JRST NLK.PA ;NO, SO LET'S FAIL GRACEFULLY
ENTER DC,LKBLK ;TRY AN ENTER TO GET FILE INFO
JRST NLK.ST ;NO LUCK THERE
MOVE T1,[2,,T2] ;POINT AT FILOP. ARGUMENTS
MOVE T2,[DC,,.FOFIL] ;FUNCTION TO RETURN FILE SPEC
MOVE T3,[.FOFMX,,FOFBLK] ;WHERE TO RETURN IT
FILOP. T1, ;ASK WHERE FILE WOUND UP
JRST NLK.E1 ;ERROR, LEAVE THINGS ALONE
MOVE T1,FOFBLK+.FOFDV ;GET DEVICE
MOVEM T1,.FDSTR(FD) ;SAVE STRUCTURE
MOVE T1,FOFBLK+.FOFFN ;GET FILE NAME
MOVEM T1,.FDNAM(FD) ;SAVE
MOVE T1,FOFBLK+.FOFEX ;GET EXTENSION
MOVEM T1,.FDEXT(FD) ;SAVE
MOVEI T1,FOFBLK+.FOFPP-.PTPPN ;FAKE LIKE A RETURNED PATH BLOCK
MOVEM T1,RIBPPN ;SAVE FOR NLK.PA
NLK.E1: MOVEI T1,DC ;GET CHANNEL
RESDV. T1, ;ABORT THE ENTER
JFCL ;YOU KNOW HOW IT IS
JRST NLK.ST ;RETURN RESULTS
NLK.BD: PUSHJ P,E.DFL## ;ISSUE ERROR MESSAGE
SKIPLE S.ALLF ;DOES HE WANT ALL HIS FILES?
N$FATE <NAF>,,<Not All Requested Files Exist> ;YES, DIE NOW
JRST NLKFIL ;NO, LOOP BACK TO GET NEXT REQUEST
NLK.BN: N$WARN <CPB>,<N>,<Can't print binary>
PUSHJ P,.TFILE##
JRST NLKFIL ;LOOP FOR NEXT FILE
;.LKWLD ARGUMENT BLOCK
WLDARG: XWD I.INZR, I.LSZR ;ADDRESS OF FIRST,,LAST FILE SPECS
XWD OPNBLK, LKBLK ;ADDRESS OF OPEN,,LOOKUP BLOCKS
XWD I.LZER, LKBLKL ;LENGTH OF FILE SPEC,,LOOKUP BLOCK
XWD 400000+DC, I ;FLAGS/CHANNEL,,INDEX TO CURRENT SPEC
WLDLEN==.-WLDARG ;LENGTH OF .LKWLD ARGUMENT BLOCK
SUBTTL ISBIN Check for Binary File Subroutine
;CALL: PUSHJ P,ISBIN
;ERROR RETURN IF WRONG
;SKIP RETURN IF OK
;USES T1, T2, T3, T4
;
ISBIN: MOVX T1,FP.OKB ;SEE IF /OKBINARY SWITCH
TDNE T1,I.MOD(I) ; ..
JRST .POPJ1## ;YES--GIVE OK RETURN
LOAD T1,I.MOD(I),FP.FPF ;GET MODE
LOAD T2,RIBPRV,RB.MOD ;GET FILE MODE
CAILE T2,.IOASL ;IF FILE MODE IS ASCII OR ASCII LINE,
CAILE T1,PRINASCII ;OR IF OUTPUT MODE IS NOT ASCII
;OR ARROW,
JRST .POPJ1## ;THEN IT IS OK ANYWAY
MOVE T1,QTYPE ;GET TYPE OF QUEUE
CAIE T1,QTPLPT ;IF NOT LPT,
JRST .POPJ1## ; THEN IT IS OK
;HERE WHEN NO SPECIAL CASES, JUST LPT OF RANDOM FILE
;
HLRZ T1,RIBEXT ;GET EXTENSION FOR EASE OF TESTING
MOVSI T3,-LENBEX ;GET LENGTH OF BINARY EXTENSION TABLE
ISBIN1: MOVE T2,BINEXT(T3) ;GET NEXT PAIR
CAIN T1,(T2) ;SEE IF IT MATCHES
POPJ P, ;YES--ERROR RETURN
HLRZS T2 ;TRY OTHER ONE
CAIN T1,(T2) ;..
POPJ P, ;ERROR RETURN
AOBJN T3,ISBIN1 ;LOOP UNTIL DONE
JRST .POPJ1## ;NOT BINARY EXTENSION--MUST BE OK
BINEXT: 'BACBIN' ;BASIC OUTPUT,,BINARY
'BUGCHN' ;PROGRAM SAVED WITH BUG,,CHAIN FILE
'DAEDCR' ;DAEMON FILE,,DCORE FILE
'DMPHGH' ;PDP-6 SAVE,,NON-SHAREABLE HIGH SEG SAVE
'LOWMSB' ;LOW SEGMENT,,MUSIC PROGRAM OUTPUT
'OVRQUC' ;COBOL OVERLAY,,QUEUE CHANGE
'QUDQUE' ;QUEUE DATA,,QUEUE REQUEST
'QUFREL' ;QUEUED REQUEST,,RELOCATABLE BINARY
'RIMRMT' ;TWO KINDS OF READ IN MODE FILES
'RTBSAV' ;ANOTHER RIM,,SAVE FILE
'SFDSHR' ;SUB-FILE DIRECTORY,,SHAREABLE HIGH SEGMENT SAVE
'SVESYS' ;10/30 SAVE,,SYSTEM BINARY FILE
'TMPUFD' ;TEMPORARY FILE,,USER'S FILE DIRECTORY
'XPNVMX' ;EXPANDED SAVE FILE,,VM SPECIAL CORE IMAGE
'EXEOVL' ;NEW SAVE FILE FORMAT,,OVERLAY
'DBSSCH' ;DBMS FILE,,ANOTHER DBMS FILE
'ATRUNV' ;SIMULA ATTRIBUTE FILE,,UNIVERSAL FILE
'DMSFIN' ;1022 DATABASE,,"FINE" EDITOR BUFFER FILE
;ADD MORE HERE--FILL WITH A DUPLICATE--NEVER FILL WITH 0
LENBEX==.-BINEXT
SUBTTL NMODFY New MODIFY routine
NMODFY: SKIPL S.BATL ;MODIFY /BATLOG SWITCH ???
N$FATE<CMB>,,<Can't modify /BATLOG switch> ;SEE YA
SKIPL S.NTF ;MODIFY /NOTIFY SWITCH ???
N$FATE<CMN>,,<Can't modify /NOTIFY switch> ;SEE YA
;SET UP THE TEMP AND MESSAGE AREAS
;
PUSH P,.JBFF## ;SAVE ORIGINAL .JBFF
PUSHJ P,MSETUP ;GET MEMORY ETC FOR MESSAGE
TXO M,1B0 ;INDICATE PAGE MODE MESSAGE
;MODIFY MESSAGE HEADER
;
MOVX T1,<INSVL.(MOD.SZ,MS.CNT)!INSVL.(.QOMOD,MS.TYP)>
MOVEM T1,.MSTYP(M) ;STORE IN MESSAGE HEADER
MOVX T1,MF.ACK ;ASK QUASAR FOR AN
MOVEM T1,.MSFLG(M) ;ACKNOWLEDGEMENT
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;GROUP 0 -- Major Queue Items
;GROUP 0, HEADER
;
MOVEI P1,<MOD.FG+MOD.GN>(M) ;POINT TO THE FIRST GROUP HEADER
MOVE P2,P1 ;COPY ADDRESS OF GROUP HEADER
MOVX T1,<.GPMAJ,,0> ;DO MAJOR REQUEST MODIFIES
PUSHJ P,GRPSTO ;STORE AND BUMP COUNTS
;GROUP 0, WORD 0
;
MOVWRD S.AFT ;/AFTER SWITCH
;GROUP 0, WORD 1
;
MOVE T1,S.PRI ;GET /PRIORITY SWITCH WORD
CAMN T1,[-1] ;DID WE TYPE IT IN ???
JRST MOD.01 ;NO, SAVE INDICATING NO CHANGE
SKIPN T1 ;/PRIORITY:0 SPECIFIED?
N$FATE <PZR>,,</PRIORITY:0 not in range 1 to 63> ;SEE YA
ANDI T1,77 ;MASK TO FIT
MOD.01: PUSHJ P,GRPSTO ;STORE /PRIORITY
;GROUP 0, WORD 2
;
MOVWRD [-1] ;/DEADLINE SWITCH, NO LONGER SUPPORTED
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;GROUP 0, WORD 3
;
LOAD T1,O.MOD,FX.PRO ;GET USER SPECIFIED PROTECTION
CAIE T1,777 ;DID HE SAY /PROT:777?
JRST MOD.02 ;NO, DON'T CHANGE IT
N$WARN <PII>,,</PROTECT:777 is illegal, changed to 677>
MOVEI T1,677 ;AND DO IT
MOD.02: SKIPN T1 ;NOT SPECIFIED?
SETOM T1 ;YES, SHOW NO CHANGE
PUSHJ P,GRPSTO ;STORE /PROTECTION
;GROUP 0, WORD 4
;
JUMPN J,MOD.03 ;IF OUTPUT QUEUE, GO DO IT
;INPUT ATTRIBUTE WORD ROUTINE
;
MOVE T1,S.ATTRIB ;GET ATTRIBUTE SWITCH WORD
CAMN T1,[-1] ;DID WE TYPE IT IN ???
JRST MOD.05 ;NO, SAVE INDICATING NO CHANGE
LOAD T1,S.ATTRIB,RO.ATR ;GET ATTRIBUTES
CAXE T1,%SITGO ;IS IT SITGO ???
MOVX T1,%GENRC ;NO, MUST BE GENRIC
HRLZS T1 ;MOVE BITS TO LEFT HALF
JRST MOD.05 ;SAVE INPUT ATTRIBUTE
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;OUTPUT MODIFY ATTRIBUTE ROUTINE
;
MOD.03: SETZM T1 ;GET SOME ATTRIBUTES
HLRZ T2,O.DEV ;GET THE DEVICE
CAIN T2,'LL ' ;IS IT LL?
MOVX T1,%LOWER ;YES,,LOAD LOWER CASE
CAIN T2,'LU ' ;OR LU?
MOVX T1,%UPPER ;YES,,LOAD UPPER CASE
HRLZS T1 ;MOVE BITS TO LEFT HALF
;OUTPUT MODIFY UNIT WORD CODE (MPB)
;MAY OVER WRITE T1, ENTRY IN MODIFY MESSAGE
;
HRRZ T2,O.DEV ;GET DEVICE ONCE MORE
JUMPE T2,MOD.04 ;MPB FORMAT FIELD ???
LDB T3,[POINT 6,T2,23] ;YES, GET 4TH DIGIT
CAIN T3,'S' ;STATION SPECIFICATION?
JRST MOD.04 ;YES, NO MPB UNIT VALUE
LDB T4,[POINT 6,T2,35] ;GET THE 6TH CHAR
TXNN T2,7700 ;IS THERE A NODE FIELD?
LDB T4,[POINT 6,T2,23] ;NO, GET 4TH DIGIT
JUMPE T4,MOD.04 ;GO IF NO UNIT
SUBI T4,'0' ;ELSE, GET A UNIT
TXO T4,RO.PHY ;SET PHYSICAL UNIT BIT
MOVE T1,T4 ;YES, SUPERCEDE PREVIOUS ATTRIBUTE
;OUTPUT MODIFY QUEUE /LOWER, /UPPER, AND /UNIT SWITCH CODE (GALAXY)
;MAY OVER WRITE T1, ENTRY IN MODIFY MESSAGE
;
MOD.04: MOVE T2,S.ATTRIB ;GET ATTRIBUTE SWITCH WORD
CAME T2,[-1] ;DID WE TYPE IT IN ???
MOVE T1,T2 ;YES, SUPERCEDE PREVIOUS ATTRIBUTE
MOD.05: SKIPN T1 ;DID WE FIND AN ATTRIBUTE ???
SETOM T1 ;NO, SO DON'T MODIFY IT
PUSHJ P,GRPSTO ;STORE /ATTRIBUTE VALUE
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;GROUP 0, WORD 5
;
SKIPE J ;THE INPUT QUEUE ???
SKIPA T1,S.DEST ;NO--LOAD /DEST
MOVE T1,S.PROC ;YES--LOAD /PROC
CAMN T1,[-1] ;DID WE TYPE IT IN ???
SKIPA ;NO, DON'T SET, CONVERT, OR DEFAULT
PUSHJ P,SETNODE ;CONVERT IT
PUSHJ P,GRPSTO ;STORE IT
;GROUP 0, WORD 6
;
SETOM T1 ;CUSTOMER WORD, INDICATE NO CHANGE
PUSHJ P,GRPSTO ;STORE IT
;GROUP 1 -- Queue Dependent Items
;GROUP 1, HEADER
;
MOVE P2,P1 ;COPY ADDRESS OF GROUP HEADER
MOVX T1,<.GPQUE,,0> ;DO QUEUE DEPENDENT MODIFY
PUSHJ P,GRPSTO ;STORE AND BUMP COUNTS
MOVE I,I.INZR ;GET THE FIRST REQUEST.
JUMPN J,MODOUT ;IF OUTPUT QUEUE, GO DO IT
JRST MODINP ;MODIFY INPUT SPECIFIC FIELDS
;CONTINUED ON THE NEXT PAGE
SUBTTL MODINP INPUT Specific Modification Routines
;CONTINUED FROM PREVIOUS PAGE
;MODIFY INPUT QUEUE
;INP GROUP 1, WORD 0
;
MODINP: MOVE T1,S.COR ;GET /CORE LIMIT
JUMPL T1,MOD.06 ;SKIP THIS IF IT DIDN'T CHANGE
ADDI T1,PAGSIZ-1 ;ROUND UP TO A PAGE BOUNDRY
ADR2PG T1 ;CONVERT TO PAGES
MOD.06: PUSHJ P,GRPSTO ;STORE /CORE
;INP GROUP 1, WORD 1
;
MOVWRD S.LTIM ;DO/TIME LIMIT
;INP GROUP 1, WORD 2
;
MOVWRD S.LLPT ;DO /LPT LIMIT
;INP GROUP 1, WORD 3
;
MOVWRD S.LCDP ;DO /CDP LIMIT
;INP GROUP 1, WORD 4
;
MOVWRD S.LPTP ;DO /PTP LIMIT
;INP GROUP 1, WORD 5
;
MOVWRD S.LPLT ;DO /PLT LIMIT
;INP GROUP 1, WORD 6
;
MOVE T1,S.DPN ;GET THE /DEPENDENCY WORD
JUMPL T1,MOD.07 ;SKIP THIS IF NO CHANGE
LOAD T1,S.DPN,MI.DEP ;GET VALUE
LOAD T2,S.DPN,MI.DMT ;GET TYPE (+,-,ABSOLUTE)
HRLI T1,(T2) ;INCLUDE TYPE CODE
MOD.07: PUSHJ P,GRPSTO ;STORE /DEPENDENCY COUNT
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;INP GROUP 1, WORD 7
;
MOVE T1,S.UNIQ ;GET /UNIQUE SWITCH
JUMPL T1,MOD.08 ;SKIP THIS IF IT DIDN'T CHANGE
CAIG T1,2 ;WAS IT :0 OR :NO ???
MOVEI T1,%EQUNO ;MAKE IT :NO
CAILE T1,2 ;OR WAS IT :1 OR :YES ???
MOVEI T1,%EQUYE ;MAKE IT :YES
MOD.08: PUSHJ P,GRPSTO ;STORE /UNIQUE
;INP GROUP 1, WORD 8
;
MOVE T1,S.RSTR ;GET /RESTART SWITCH
JUMPL T1,MOD.09 ;SKIP THIS IF IT DIDN'T CHANGE
MOVX T1,%EQRNO ;ASSUME /REST:NO
SKIPE S.RSTR ;IS IT /REST:NO ???
MOVX T1,%EQRYE ;NO, SO IT'S /REST:YES
MOD.09: PUSHJ P,GRPSTO ;STORE /RESTART
;INP GROUP 1, WORD 9
;
MOVWRD S.OUT ;DO /OUTPUT (/Z:)
;INP GROUP 1, WORD 10
;
MOVE T1,S.DEST ;YES, LOAD /DEST
CAMN T1,[-1] ;DID WE TYPE IT IN ???
SKIPA ;NO, DON'T SET, CONVERT, OR DEFAULT
PUSHJ P,SETNODE ;CONVERT IT
PUSHJ P,GRPSTO ;STORE /DEST (INP:)
;INP GROUP 1, WORD 11
;
MOVWRD S.ASST ;DO /ASSISTANCE (OINT)
;DO INP FILE SPECIFIC CHANGES NOW
;INP GROUP 1, WORD 12
;
MOVWRD I.STRT(I) ;DO /TAG OR /BEGIN
JRST KILN.1 ;FILL IN COMMON PART AND SEND MESSAGE
SUBTTL MODOUT OUTPUT Specific Modification Routines
;MODIFY OUTPUT QUEUE
;GROUP 1, WORD 0
;
MODOUT: MOVWRD S.FRM ;DO /FORMS
;GROUP 1, WORD 1
;
MOVWRD S.LIM ;DO /LIMIT
;GROUP 1, WORD 2
;
MOVWRD S.NOT ;DO /ANNOTATION (1ST HALF)
;GROUP 1, WORD 3
;
MOVWRD S.NOT+1 ;DO /ANNOTATION (2ND HALF)
;OUTPUT FILE SPECIFIC MODIFY ROUTINE
;OUT GROUP 1, WORD 4
;
NMDCHG FP.NFH ;GET /HEADER
SKIPL T1 ;SKIP IF NO CHANGE
TRC T1,1 ;FLIP IT FOR GALAXY
PUSHJ P,GRPSTO ;STORE /HEADER
;OUT GROUP 1, WORD 5
;
NMDCHG FP.FSP ;GET /SPACING
PUSHJ P,GRPSTO ;STORE /SPACING
;OUT GROUP 1, WORD 6
;
NMDCHG FP.FPF ;GET /PRINT FORMAT
PUSHJ P,GRPSTO ;STORE /PRINT
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;OUT GROUP 1, WORD 7
;
NMDCHG FP.FFF ;GET /FILE FORMAT
PUSHJ P,GRPSTO ;STORE /FILE
;OUT GROUP 1, WORD 10
;
NMDCHG FP.DSP ;GET /DISPOSITION
CAIN T1,DISPRENAME ;MODIFY /RENAME SWITCH ???
N$FATE<CMR>,,<Can't modify /DISPOSE:RENAME> ;SEE YA
JUMPL T1,MOD.10 ;JUMP IF DIDN'T CHANGE
CAIN T1,DISPPRES ;WAS IT /DIS:PRESERVE
TDZA T1,T1 ;YES, CLEAR THE DELETE BIT
MOVEI T1,1 ;NO, SET THE DELETE BIT
MOD.10: PUSHJ P,GRPSTO ;STORE /DISP
;OUT GROUP 1, WORD 11
;
NMDCHG FP.FCY ;GET /COPY COUNT
PUSHJ P,GRPSTO ;STORE /COPIES
;OUT GROUP 1, WORD 12
;
MOVWRD I.RPT(I) ;/REPORT 1ST WORD
;OUT GROUP 1, WORD 13
;
MOVWRD I.RPT+1(I) ;/REPORT 2ND WORD
;OUT GROUP 1, WORD 14
;
MOVWRD I.STRT(I) ;STORE /BEGIN
JRST KILN.1 ;FILL IN COMMON PART AND SEND MESSAGE
SUBTTL GRPSTO Subroutine to Add a MODIFY Element to the Message
;CALL: PUSHJ P,GRPSTO
; T1 = THING TO STORE
; P1 = CURRENT POINTER (WILL INCREMENT THIS AND MESSAGE LENGTH)
; P2 = GROUP HEADER ADDRESS (WILL INCREMENT ELEMENT COUNT)
;
GRPSTO: CAILE P1,PAGSIZ-1(M) ;OFF THE END YET
N$FATE<TMF>,,<Too Many Files in File-Specific Modify>
MOVEM T1,(P1) ;STORE THIS ELEMENT
LOAD T1,.MSTYP(M),MS.CNT ;GET CURRENT COUNT
INCR T1 ;ADD ANOTHER
STORE T1,.MSTYP(M),MS.CNT ;STORE IT
INCR MOD.GN(P2),MODGLN ;ANOTHER ELEMENT IN THIS GROUP
AOJA P1,.POPJ## ;ADVANCE FOR NEXT STORE AND RETURN
SUBTTL NKILL New KILL routine
;SET UP THE TEMP AND MESSAGE AREAS
;
NKILL: PUSH P,.JBFF## ;SAVE ORIGINAL .JBFF
PUSHJ P,MSETUP ;GET MEMORY ETC FOR MESSAGE
;KILL MESSAGE HEADER
;
MOVX T3,<INSVL.(KIL.SZ,MS.CNT)!INSVL.(.QOKIL,MS.TYP)>
MOVEM T3,.MSTYP(M) ;STORE IN MESSAGE HEADER
MOVX T3,MF.ACK ;SET FOR ACKNOWLEDGEMENT
MOVEM T3,.MSFLG(M) ;
KILN.1: PUSHJ P,GETOBJ ;GET OBJECT TYPE
STORE T3,KIL.OT(M) ;STORE IT
MOVE T1,O.NAM ;GET THE JOB NAME, COULD BE ZERO
STORE T1,KIL.RQ+.RDBJB(M) ;COPY THE JOB NAME
MOVE T1,O.NAMM ;GET THE MASK
STORE T1,KIL.RQ+.RDBJM(M) ;AND PUT IT IN THE MESSAGE
SKIPG T1,S.SEQ ;ANY SEQUENCE NUMBER ???
SETZM T1 ;IF NEGATIVE, SET TO ZERO
STORE T1,KIL.RQ+.RDBES(M) ;STORE IT IN MESSAGE
SKIPG T1,S.RID ;GET THE REQUEST ID
SETZM T1 ;IF NEGATIVE, SET TO ZERO
STORE T1,KIL.RQ+.RDBRQ(M) ;AND STORE IT IN THE MESSAGE
MOVE T1,O.DIR ;GET SPECIFIED PPN/DIRECTORY
STORE T1,KIL.RQ+.RDBOI(M) ;AND STORE IT
MOVE T1,O.DIRM ;GET THE PPN MASK
STORE T1,KIL.RQ+.RDBOM(M) ;AND ITS MASK
PUSHJ P,MSGSND ;SEND THE MESSAGE
PUSHJ P,RCVACK ;GET THE ACKNOWLEDGEMENT
PJRST CMDXIT ;AND RETURN TO CALLER
SUBTTL NLIST New LIST Routines
NLIST: PUSHJ P,LSTOPN ;OPEN THE LISTING FILE
MOVE I,I.INZR ;GET THE FIRST REQUEST.
;SET UP THE TEMP AND MESSAGE AREAS
;
PUSH P,.JBFF## ;SAVE ORIGINAL .JBFF
PUSHJ P,MSETUP ;GET MEMORY ETC FOR MESSAGE
;LIST MESSAGE HEADER
;
MOVEI T1,.OHDRS ;MAKE MESSAGE LENGTH FOR NOW
STORE T1,.MSTYP(M),MS.CNT ;AND SAVE IT.
MOVX T1,.QOLIS ;GET THE REQUEST TYPE.
STORE T1,.MSTYP(M),MS.TYP ;AND SAVE IT.
SETZM .OARGC(M) ;NO ARGS YET
SETZM .MSCOD(M) ;ZERO THE ACK CODE.
MOVE T1,S.LIST ;GET THE /LIST: BITS.
SETZM T2 ;DEFAULT THE FLAG WORD
CAIN T1,LISTFAST ;DOES HE WANT A QUICK LISTING.
MOVX T2,LS.FST ;YES, GET THE /L:FAST BITS.
CAIN T1,LISTALL ;WAS IT /LIST:ALL ???
MOVX T2,LS.ALL ;YES, GET THE RIGHT BITS
CAIN T1,LISTSUMMARY ;/LIST:SUMMARY?
MOVX T2,LS.SUM ;YES
IFN FTDQS,<
SKIPG S.RMT ;DOES HE WANT A REMOTE LISTING TOO?
SKIPE S.QNM ;NOT EXPLICITLY, MAYBE BY DEFAULT?
TXO T2,LS.RMT ;YES
>; END IFN FTDQS
MOVEM T2,.OFLAG(M) ;SAVE IT IN THE MESSAGE.
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;QUEUE TYPE BLOCK # 0
;
SETO T3, ;ASSUME ALL QUEUES
MOVEI P2,.OHDRS(M) ;POINT TO FIRST FREE LIST BLOCK
MOVE T1,.FXDEV(I) ;GET THE DEVICE
MOVE T2,T1 ;SAVE IT IN T2
TRZ T1,-1 ;GET JUST GENERIC PART
CAMN T1,QUENMA ;IS IT 'ALLXXX' ???
HRRZS T2 ;YES, MAKE IT 0,,XXX
HLLZ T2 ;GET GENERIC DEVICE
JUMPE T2,NLST.3 ;PROPER ASSUMPTION
MOVSI T3,-NDEVS ;MAKE AN AOBJN POINTER
NLST.1: CAMN T1,DEVTAB(T3) ;MATCH?
JRST NLST.2 ;YES
AOBJN T3,NLST.1 ;NO, LOOP
SETZM T3 ;LET QUASAR THROUGH IT OUT
JRST NLST.3 ;STORE RESULT
NLST.2: MOVE T3,LIQTAB(T3) ;GET MASK
NLST.3: MOVEM T3,LSTQUE ;SAVE FOR LATER
MOVEI T4,.LSQUE ;TYPE (QUEUES TO LIST)
PUSHJ P,NLSTBL ;ADD TO LIST BLOCK
;ID/PPN BLOCK # 1
;
SKIPLE S.CHK ;SEE IF /CHECK
JRST [MOVE T1,.MYPPN ;YES--GET MY PPN
MOVEM T1,.FXDIR(I) ;SAVE AS SPECIFIED
SETOM .FXDIM(I) ;FLAG NO WILD CARDS
JRST .+1] ;AND CONTINUE
SKIPN T3,.FXDIR(I) ;SEE IF USER ID/PPN GIVEN
JRST NLST.4 ;NO
MOVEI T4,.LSUSR ;TYPE (USER ID)
PUSHJ P,NLSTBL ;ADD TO LIST BLOCK
;ID/PPN MASK BLOCK # 2
;
MOVE T3,.FXDIM(I) ;GET USER ID MASK
MOVEI T4,.LSUSM ;TYPE (USER ID MASK)
PUSHJ P,NLSTBL ;ADD TO LIST BLOCK
;JOBNAME REQUESTED BLOCK # 3
;
NLST.4: SKIPN T3,.FXNAM(I) ;SEE IF JOB NAME GIVEN
JRST NLST.5 ;NO
MOVEI T4,.LSJOB ;TYPE (JOB NAME)
PUSHJ P,NLSTBL ;ADD TO LIST BLOCK
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;JOBNAME REQUESTED MASK BLOCK # 4
;
MOVE T3,.FXNMM(I) ;GET JOB NAME MASK
MOVEI T4,.LSJBM ;TYPE (JOB NAME MASK)
PUSHJ P,NLSTBL ;ADD TO LIST BLOCK
;ROB UNIT (MPB) BLOCK # 5
;
NLST.5: SETOM T3 ;INDICATE NO MPB/GLX UNIT BITS YET
HRRZ T1,.FXDEV(I) ;GET DEVICE ONCE MORE
JUMPE T1,NLST.6 ;MPB FORMAT FIELD ???
LDB T2,[POINT 6,T1,23] ;YES, GET 4TH DIGIT
CAIN T2,'S' ;STATION SPECIFICATION?
JRST NLST.6 ;YES, NO MPB UNIT VALUE
LDB T2,[POINT 6,T1,35] ;GET THE 6TH CHAR
TXNN T1,7700 ;IS THERE A NODE FIELD?
LDB T2,[POINT 6,T1,23] ;NO, GET 4TH DIGIT
JUMPE T2,NLST.6 ;GO IF NO UNIT
SUBI T2,'0' ;ELSE, GET A UNIT
MOVE T3,T2 ;GET READY TO STORE MPB BITS
;IF NECESSARY
;ROB /UNIT SWITCH (GALAXY) BLOCK # 5
;
NLST.6: LOAD T1,S.ATTRIB,RO.ATR ;YES, GET OBJECT ATTRIBUTES
CAIN T1,%PHYCL ;PHYSICAL UNIT ???
MOVE T3,S.ATTRIB ;YES, GET GALAXY UNIT BITS
SKIPL T3 ;UNLESS NOT SPECIFIED,
HRRZM T3,LSTUNT ;SAVE FOR LATER
MOVEI T4,.LSUNT ;YES, SET TYPE (UNIT NUMBER)
PUSHJ P,NLSTBL ;AND ADD IT TO THE LIST BLOCK
MOVE T3,S.UNTY ;GET UNIT TYPE
MOVE T4,T3 ;COPY IT
AOJE T4,NLST.7 ;JUMP IF NONE REQUESTED
MOVEM T3,LSTUTY ;SAVE UNIT FOR LATER
MOVEI T4,.LSUTY ;BLOCK CODE FOR UNIT TYPE
PUSHJ P,NLSTBL ;ADD TO MESSAGE
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;DESTINATION NODE (MPB) BLOCK # 6
;
NLST.7: SETOM T3 ;INDICATE NO MPB/GLX DEST FIELD
HRRZ T1,.FXDEV(I) ;GET DEVICE ONCE MORE
JUMPE T1,NLS.7B ;MPB FORMAT FIELD ???
TXNN T1,7700 ;YES, IS THERE A NODE FIELD?
JRST NLS.7B ;NO, GOTO GALAXY FIELD PROCESSING
SETZM T3 ;CLEAR AC FOR MPB NODE NUMBER
LDB T2,[POINT 6,T1,23] ;YES, GET 4TH CHAR
CAIN T2,'S' ;STATION SPECIFICATION?
JRST NLS.7A ;YES, fooSnn COMMAND
SUBI T2,'0' ;NO, MAKE CHAR OCTAL
DPB T2,[POINT 3,T3,32] ;BUILD OCTAL NODE DEST NUMBER
LDB T2,[POINT 6,T1,29] ;GET 5TH CHAR
SUBI T2,'0' ;MAKE CHAR OCTAL
DPB T2,[POINT 3,T3,35] ;FINISH OCTAL NODE DEST NUMBER
JRST NLS.7B ;CHECK FOR GALAXY BITS
NLS.7A: LDB T2,[POINT 6,T1,29] ;GET 5TH CHAR
SUBI T2,'0' ;MAKE CHAR OCTAL
DPB T2,[POINT 3,T3,32] ;BUILD OCTAL NODE DEST NUMBER
LDB T2,[POINT 6,T1,35] ;GET 6TH CHAR
SUBI T2,'0' ;MAKE CHAR OCTAL
DPB T2,[POINT 3,T3,35] ;FINISH OCTAL NODE DEST NUMBER
;DESTINATION NODE (GALAXY) BLOCK # 6
;
NLS.7B: MOVE T1,S.DEST ;GET /DESTINATION
CAMN T1,[-1] ;DO WE HAVE GALAXY BITS ???
JRST NLS.7C ;NO, SO USE DEFAULT OR MPB BITS
PUSHJ P,SETNOD ;CONVERT IF NECESSARY
MOVE T3,T1 ;YES, USE THEM INSTEAD OF MPB BITS
NLS.7C: MOVEM T3,LSTNOD ;SAVE FOR LATER
MOVEI T4,.LSDND ;BLOCK TYPE
PUSHJ P,NLSTBL ;ADD TO MESSAGE
;PROCESSING NODE BLOCK # 7
;
MOVE T1,S.PROC ;GET /PROCESSING
PUSHJ P,SETNOD ;CONVERT IF NECESSARY
MOVE T3,T1 ;GET READY TO STORE IT
MOVEI T4,.LSPND ;BLOCK TYPE
PUSHJ P,NLSTBL ;ADD TO MESSAGE
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
IFN FTDQS,<
SKIPE S.QNM ;SEE IF /QUEUE
PUSHJ P,NLSTQN ;YES, ADD QUEUE NAME BLOCK TO MESSAGE
>; END IFN FTDQS
;SEND LIST MESSAGE TO QUASAR
;
TXO M,1B0 ;INDICATE A PAGE FOR MSGSND
PUSHJ P,MSGSND ;SEND THE REQUEST
;RECEIVE MESSAGE FROM QUASAR
;
NLST.8: MOVE M,.JBFF## ;NOW FOR THE MESSAGES RETURNED,
MOVEI M,PAGSIZ-1(M) ;COMPUTE THE FIRST NON-EX PAGE.
TRZ M,PAGSIZ-1 ;ZERO THE BOTTOM BITS.
ADR2PG M ;CONVERT IT TO A PAGE NUMBER.
PUSHJ P,QUEWAT ;WAIT FOR A MESSAGE FROM QUASAR
MOVX T3,IP.CFV ;IT'S A PAGED ANSWER
SETZB T4,P1 ;CLEAR OTHER STUFF
MOVEI P2,(M) ;THE PAGE TO RECEIVE
HRLI P2,PAGSIZ ;COUNT FOR PAGE MODE
MOVE T2,[4,,T3] ;LENGTH,,ADDR
IPCFR. T2, ;REC, WAIT
SKIPA ;CAN'T
JRST NLST.9 ;PROCESS THE MESSAGE
CAXN T2,IPCUP% ;OUT OF CORE ?
N$FATE<NCL>,,<Not enough core to receive list answer>
N$FATE<LRF>,,<List answer receive failed>
NLST.9: PG2ADR M ;CONVERT PAGE # TO AN ADDRESS.
MOVEM M,.JBFF## ;RESET THE LAST PAGE ADDRESS.
INCR .JBFF## ;BUMP IT BY 1 TO FORCE NEXT PAGE.
MOVE T2,ACKCOD ;GET THE CODE WE WANT TO SEE
CAME T2,.MSCOD(M) ;EXPECTING THIS MESSAGE?
JRST NLST.8 ;NO, IGNORE IT
PUSHJ P,LSTTYO ;GO DUMP THE ANSWER.
LOAD T2,.OFLAG(M) ;GET THE FLAG BITS.
TXNE T2,WT.MOR ;WAS THIS THE LAST PAGE ???
JRST NLST.8 ;NO,,GO GET ANOTHER PAGE.
CLOSE LC, ;YES, CLOSE THE CHANNEL
RELEAS LC, ;RELEASE THE CHANNEL
PJRST CMDXIT ;AND RETURN
SUBTTL NLSTBL Subroutine to Add Thing to LIST Message Block
;CALL: PUSHJ P,NLSTBL
; T3/ DATA TO ADD
; T4/ TYPE CODE
;ASSUMES (AND UPDATES) P2 TO BE POINTER TO NEXT FREE BLOCK
NLSTBL: MOVEM T3,ARG.DA(P2) ;STORE THE DATA
STORE T4,ARG.HD(P2),AR.TYP ;STORE THE TYPE
MOVEI T3,2 ;THEY ARE TWO WORDS LONG
STORE T3,ARG.HD(P2),AR.LEN ;STORE THE LENGTH
INCR .OARGC(M) ;ONE MORE ARG
ADDI P2,2 ;ADVANCE TO NEXT BLOCK
LOAD T3,.MSTYP(M),MS.CNT ;GET MESSAGE COUNT
ADDI T3,2 ;UPDATE FOR WHAT WE STORED
STORE T3,.MSTYP(M),MS.CNT ;AND REMEMBER
POPJ P, ;RETURN
SUBTTL NLSTQN Subroutine to store queue name string to LIST message block
;CALL: PUSHJ P,NLSTQN
; S.QNM/ QUEUE NAME STRING
;ASSUMES (AND UPDATES) P2 TO BE POINTER TO NEXT FREE BLOCK
IFN FTDQS,<
NLSTQN: MOVSI T1,-QNMLEN ;SEE HOW LONG THE STRING IS
SKIPE S.QNM(T1) ;LOOK FOR A ZERO
AOBJN T1,.-1 ;LOOP
HRRZS T1 ;ISOLATE LENGTH OF QUEUE NAME STRING
MOVEI T2,ARG.DA(T1) ;LENGTH INCLUDING HEADER STUFF
STORE T2,ARG.HD(P2),AR.LEN ;STORE LENGTH
MOVX T2,.LSQNM ;GET THE BLOCK TYPE
STORE T2,ARG.HD(P2),AR.TYP ;STORE IN MESSAGE BLOCK
MOVEI T2,ARG.DA(P2) ;WHERE TO COPY THE STRING TO
MOVE T3,T2 ;GET A COPY
HRLI T2,S.QNM ;SOURCE ADDRESS
ADDI T3,-1(T1) ;ADD LENGTH -1
BLT T2,(T3) ;COPY THE STRING
INCR .OARGC(M) ;COUNT ANOTHER BLOCK
LOAD T2,.MSTYP(M),MS.CNT ;GET MESSAGE COUNT
ADDI T2,ARG.DA(T1) ;INCLUDE THIS BLOCK
STORE T2,.MSTYP(M),MS.CNT ;UPDATE FOR WHAT WE STORED
ADDI P2,ARG.DA(T1) ;ADVANCE TO NEXT BLOCK
POPJ P, ;RETURN
>; END IFN FTDQS
SUBTTL LSTOPN Listing routines - Open the listing file
LSTOPN: MOVE I,I.INZR ;START WITH FIRST REQUEST
MOVSI T3,B.LC ;POINT TO BUFFER HEADERS
MOVEM T3,L.OPEN+2 ;STORE IN OPEN BLOCK
MOVEI T3,LN$ENT-1 ;SET LENGTH OF BLOCK
IORM T3,L.LOOK ; INTO LOOKUP BLOCK
MOVS T3,L.OPEN+1 ;GET OUTPUT DEVICE
MOVE N,O.DEV ;GET DEVICE NAME IN CASE THIS FAILS
CAIE T3,'TTY' ;IF TTY:
TLNE F,L.LOGI ; OR LOGGED IN,
JRST LSTO.1 ;THEN OK TO LIST
TLNE F,L.NSBJ ;ARE WE LOGGED IN AT TOP LEVEL?
N$FATE <LTL>,<N>,<LOGIN to list on device>
LSTO.1: OPEN LC,L.OPEN ;INIT THE DEVICE
N$FATE <LOF>,<N>,<Listing OPEN failure on device>
ENTER LC,L.LOOK ;ENTER FILE
JRST E.OEFE ;ERROR
OUTBUF LC,0 ;BUILD BUFFERS BEFORE WE MANGLE CORE
MOVEI T1,L.PATH ;POINT TO LISTING PATH BLOCK
MOVEM T1,L.LOOK+.RBPPN ;STORE FOR FILESPEC TYPEOUT
MOVEI T1,LC ;GET THE CHANNEL NUMBER
DEVCHR T1, ;GET DEVICE CHARACTERISTICS
TXNE T1,DV.TTY ;SEE IF LINE MODE OUTPUT DEVICE
TRO F,R.OUTL ;YES--SET FLAG TO FORCE OUT EACH LINE
TLC T1,-1-<(DV.TTA)> ;SEE IF NUL:
TLCN T1,-1-<(DV.TTA)> ; ..
JRST LSTDEV ;IT IS - HANDLE NON-DIRECTORY DEVICE
TXNE T1,DV.TTA ;CONTROLLING TTY ?
POPJ P, ;YES - THEN DON'T OUTPUT A MESSAGE
TXNE T1,DV.MTA ;A MAGTAPE ?
JRST LSTMTA ;YES
TXNE T1,DV.DSK ;A DISK ?
JRST LSTDSK ;YES
TXNE T1,DV.DIR ;DIRECTORY DEVICE ?
JRST LSTDIR ;YES - HANDLE DIFFERENTLY
JRST LSTDEV ;MUST BE A RANDOM DEVICE
SUBTTL LSTMTA Listing routines - Type out listing filespec
LSTMTA: MOVE T1,[3,,T2] ;SET UP AC
MOVX T2,.TFDEN+.TFSET ;FUNCTION CODE
MOVEI T3,LC ;LOAD CHANNEL NUMBER
LOAD T4,O.MOD,FX.DEN ;GET DENSITY
TAPOP. T1, ;SET IT
JFCL ;IGNORE ERRORS
MOVE T1,[3,,T2] ;SET UP AC
MOVX T2,.TFPAR+.TFSET ;LOAD FUNCTION CODE
MOVEI T3,LC ;LOAD CHANNEL NUMBER
LOAD T4,O.MOD,FX.PAR ;GET PARITY BIT
TAPOP. T1, ;SET ODD OR EVEN PARITY
JFCL ;IGNORE ERRORS
N$INFO <QLF>,<N>,<Queue listing on file>
MOVEI T1,LC ;GET CHANNEL NUMBER
DEVNAM T1, ;WANT THE REAL NAME
MOVE T1,L.OPEN+.OPDEV ;ASSUME NAME FROM OPEN BLOCK
PUSHJ P,.TSIXN## ;TYPE IT
PUSHJ P,.TCOLN## ;TYPE COLON
MOVEI T1,[ASCIZ |, density = |]
PUSHJ P,.TSTRG## ;TYPE TEXT
MOVE T1,[3,,T2] ;SET UP AC
MOVX T2,.TFDEN ;FUNCTION CODE
MOVEI T3,LC ;LOAD CHANNEL NUMBER
TAPOP. T1, ;READ DENSITY
MOVEI T1,0 ;CAN'T - ASSUME DEFAULT
CAILE T1,DENMAX ;GREATER THAN HIGHEST KNOWN DENSITY ?
MOVX T1,-1 ;UNKNOWN
MOVE T1,DENTAB(T1) ;PICK UP DENSITY TEXT
PUSHJ P,.TSTRG## ;TYPE IT
JRST LSTEND ;GO TO COMMON ENDING
; DENSITY TABLE
;
[ASCIZ |Unknown|]
DENTAB: [ASCIZ |Default|]
[ASCIZ |200|]
[ASCIZ |556|]
[ASCIZ |800|]
[ASCIZ |1600|]
[ASCIZ |6250|]
DENMAX==.-DENTAB
LSTDEV: N$INFO <QLF>,<N>,<Queue listing on file>
MOVEI T1,LC ;GET CHANNEL NUMBER
DEVNAM T1, ;WANT THE REAL NAME
MOVE T1,L.OPEN+.OPDEV ;ASSUME NAME FROM OPEN BLOCK
PUSHJ P,.TSIXN## ;TYPE IT
PUSHJ P,.TCOLN## ;TYPE COLON
JRST LSTEND ;GO TO COMMON ENDING
LSTDSK: MOVEI T1,LC ;GET CHANNEL NUMBER
MOVEM T1,L.PATH ;STORE IT
MOVEM T1,L.DSKC ;STORE IN DSKCHR BLOCK TOO
MOVE T1,[.PTMAX,,L.PATH] ;SET UP CALL
PATH. T1, ;READ PATH OF CHANNEL
JFCL ;IGNORE ERRORS
MOVE T1,[LN$DSK,,L.DSKC] ;SET UP DSKCHR UUO
DSKCHR T1, ;SEE WHAT THE DEVICE REALLY IS
SKIPA T1,L.OPEN+.OPDEV ;CAN'T
SKIPE T1,L.DSKC+.DCSNM ;GET STRUCTURE NAME (GUARD AGAINST NUL:)
MOVEM T1,L.OPEN+.OPDEV ;STORE IT
;FALL INTO LSTDIR
LSTDIR: N$INFO <QLF>,<N>,<Queue listing on file>
MOVEI T1,L.OPEN ;POINT TO THE OPEN BLOCK
MOVEI T2,L.LOOK ;POINT TO THE ENTER BLOCK
PUSHJ P,.TOLEB## ;TYPE FILESPEC
LSTEND: PUSHJ P,FINFO2 ;CLOSE OFF THE MESSAGE
PUSHJ P,LSTHDR ;TYPE LISTING HEADER
POPJ P, ;RETURN
SUBTTL LSTHDR Listing routines - Header generation
LSTHDR: MOVEI T1,LSTCHR ;GET OUT ROUTINE TO PUT A CHARACTER
PUSHJ P,.TYOCH## ;TELL SCAN ABOUT IT
MOVEM T1,L.OTYO ;REMEMBER THE OLD SETTING
PUSHJ P,.TCRLF## ;NEW LINE
MOVEI T1,[ASCIZ |Listing by QUEUE version |]
PUSHJ P,.TSTRG## ;TYPE HEADER INTRO
MOVE T1,.JBVER ;GET OUT VERSION NUMBER
PUSHJ P,.TVERW## ;TYPE IT
MOVEI T1,[ASCIZ | on |] ;SEPERATOR
PUSHJ P,.TSTRG## ;TYPE INTRO
PUSHJ P,.TDATN## ;TYPE THE CURRENT DATE
MOVEI T1,[ASCIZ | at |] ;GET SEPERATOR
PUSHJ P,.TSTRG## ;TYPE TEXT
PUSHJ P,.TTIMN## ;TYPE THE CURRENT TIME
PUSHJ P,.TCRLF## ;NEW LINE
PUSHJ P,.TCRLF## ;AND ANOTHER
MOVE T1,L.OTYO ;GET OLD TYPE OUT ROUTINE
PUSHJ P,.TYOCH## ;TELL SCAN
POPJ P, ;RETURN
SUBTTL LSTTYO Listing routines - Output the list answer
LSTTYO: MOVEI T1,.OHDRS(M) ;POINT TO THE FIRST MESSAGE BLOCK.
LOAD T2,ARG.HD(T1),AR.LEN ;GET THE BLOCK LENGTH.
SOSLE .OARGC(M) ;CHECK THE ARGUMENT COUNT.
ADD T1,T2 ;IF 2 BLOCKS,,GET 2ND BLOCK ADDRESS.
MOVEI T1,ARG.DA(T1) ;GET ADDRESS OF STRING
HRLI T1,(POINT 7,) ;MAKE A BYTE POINTER
MOVEM T1,L.PNTR ;STORE BYTE POINTER
LSTT.1: ILDB T1,L.PNTR ;GET A CHARACTER
PUSHJ P,LSTCHR ;PUT A CHARACTER
JUMPE T1,.POPJ## ;DONE IF WE ENCOUNTER A <NUL>
CAILE T1,.CHFFD ;END OF LINE ?
JRST LSTT.1 ;NO - CONTINUE
TRNE F,R.OUTL ;OUTPUT ON EVERY LINE ?
PUSHJ P,LSTC.1 ;YES - DO IT NOW
JRST LSTT.1 ;LOOP BACK FOR MORE CHARACTERS
POPJ P, ;RETURN.
LSTCHR: SOSG B.LC+.BFCNT ;ROOM IN THE BUFFER ?
PUSHJ P,LSTC.1 ;BUFFER FULL - WRITE IT OUT
IDPB T1,B.LC+.BFPTR ;PUT A CHARACTER
POPJ P, ;RETURN
LSTC.1: OUT LC, ;OUTPUT BUFFER
POPJ P, ;NO ERRORS - RETURN
PUSHJ P,.PSH4T## ;SAVE T3 - P2 (T1,T2,T3,T4)
GETSTS LC,L.STAT ;GET CHANNEL STATUS
MOVE T3,L.STAT ;PREPARE TO CLEAR
TXZ T3,IO.ERR ; BY PRESERVING JUST
SETSTS LC,(T3) ; THE CONTROL BITS
N$WARN <LDE>,<N>,<Listing device output error, status =>
HRLZ T2,L.STAT ;GET STATUS IN LH OF T2
MOVEI T3,6 ;SET UP COUNTER
LSTC.2: LSHC T1,3 ;SHIFT IN A DIGIT
ANDI T1,7 ;NO JUNK
ADDI T1,"0" ;MAKE IT ASCII
PUSHJ P,.TCHAR## ;TYPE IT
SOJG T3,LSTC.2 ;LOOP FOR ANOTHER
PUSHJ P,.TCRLF## ;NEW LINE
PUSHJ P,.POP4T## ;RESTORE T3 - P2 (T1,T2,T3,T4)
POPJ P, ;BACK FOR MORE CHARACTERS
SUBTTL NDEFER New DEFER & ZDEFER Routine
NDEFER: MOVE T1,I.INZR ;GET POINTER TO FIRST INPUT SPEC
SKIPE .FXNMM(T1) ;CHECK MASK FOR * OR ?????? TYPED
N$FATE<CDF>,,<Cannot /DEFER specific files>
ADDI T1,I.LZER ;POINT TO NEXT
CAMGE T1,I.NXZR ;WAS ONLY ONE SPEC SPEFICIED
N$FATE<TDR>,,<Too may deferred requests>
;SET UP THE TEMP AND MESSAGE AREAS
;
PUSH P,.JBFF## ;SAVE ORIGINAL .JBFF
PUSHJ P,MSETUP ;GET MEMORY ETC FOR MESSAGE
;DEFER MESSAGE HEADER
;
MOVX T1,<INSVL.(DFR.SZ,MS.CNT)!INSVL.(.QODFR,MS.TYP)>
MOVEM T1,.MSTYP(M) ;STORE MESSAGE AND LENGTH
MOVX T1,MF.ACK ;SET FOR ACKNOWLEDGEMENT
MOVEM T1,.MSFLG(M) ;
MOVE T2,S.OPN ;GET THE OPERATION SPECIFIED
SETOM S.OPN ;RESET THE OPERATION FIELD
SETOM T1, ;CLEAR T1
CAIN T2,.QORCR ;/CREATE?
MOVEI T1,.DFREL ;YES, PASS DEFER FUNCTION
CAIN T2,.QORKL ;/KILL?
MOVEI T1,.DFKIL ;PASS /ZDEFER
SKIPGE T1 ;MUST BE ONE OR THE OTHER
N$FATE<DMI>,,</DEFER request must include /CREATE or /KILL> ;NO
STORE T1,DFR.JB(M),DF.FNC ;YES, STORE THE DEFER FUNCTION
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
PJOB T1, ;FOR THIS JOB NUMBER
STORE T1,DFR.JB(M),DF.JOB ;STORE THE JOB NUMBER
SKIPE N,O.DEV ;DID HE TYPE A DEVICE?
PUSHJ P,XPNQUE ;YES, EXPAND IT
MOVEM N,O.DEV ;AND STORE IT BACK
MOVS T1,COMDEV ;GET COMMAND-DEVICE
CAIN T1,'LP ' ;DID HE SAY .QUEUE?
SETZM COMDEV ;YES, NO SPECIAL DEVICE
SKIPN T1,O.DEV ;GET SPECIFIED DEVICE
MOVE T1,COMDEV ;NONE THERE, USE COMMAND-DEVICE
MOVEM T1,O.DEV ;SAVE DEVICE IN O.DEV
SKIPE T3,O.DEV ;SKIP IF HE WANTS ALL QUEUES
PUSHJ P,GETOBJ ;GET THE OBJECT
MOVEM T3,DFR.OT(M) ;STORE THE OBJECT
PUSHJ P,MSGSND ;SEND OFF THE MESSAGE
PUSHJ P,RCVACK ;GET ACKNOWLEDGEMENT
PJRST CMDXIT ;USE THE NORMAL EXIT
SUBTTL CMDXIT Return Routine
CMDXIT: POP P,.JBFF## ;RESTORE ORIGINAL .JBFF
MOVE T3,.JBFF## ;GET THE VALUE
SUBI T3,1 ;BACK OFF FOR THE CORE UUO
CORE T3, ;GIVE SOME BACK
JFCL ;NICE TRY
POPJ P, ;RETURN FOR NEXT COMMAND
RESCOR: MOVE T3,-1(P) ;.JBFF IS DOWN ON THE STACK
MOVEM T3,.JBFF## ;RESET IT
SUBI T3,1 ;BACK OFF FOR THE CORE UUO
CORE T3, ;GIVE SOME BACK
JFCL ;NICE TRY
POPJ P, ;RETURN TO CALLER
SUBTTL MSETUP Subroutine to Setup Temp and Message Areas
MSETUP: PUSHJ P,QUEFLS ;FLUSH THE RECEIVE QUEUE FIRST
PUSHJ P,GQPID ;GET QUASAR'S PID
PUSHJ P,BLDACK ;GO BUILD AN ACK CODE
SETZM FSTMSG ;CLEAR ADDRESS OF FIRST MESSAGE
SETZM NUMANS ;AND NUMBER OF CREATES TO SEND
;GET AND CLEAR PAGE FOR MESSAGE
;
MSUP.1: MOVE M,.JBFF## ;CREATE MESSAGES ARE PAGE MODE SO
MOVEI M,PAGSIZ-1(M) ;ALIGN .JBFF ON A PAGE BOUNDRY
TRZ M,PAGSIZ-1 ;MAKE IT SO
MOVEM M,.JBFF## ;FAKE OUT CORGET
SOS .JBFF ;BACK OFF BY ONE
GCORE PAGSIZ ;GET A PAGE FOR IT
SETZM (M) ;CLEAR THE NEW MESSAGE FIRST
HRLI T1,(M) ;SET UP FOR EVENTUAL BLT
HRRI T1,1(M) ;DESTINATION
BLT T1,PAGSIZ-1(M) ;GET IT ALL
SKIPN FSTMSG ;THIS THE FIRST ONE
MOVEM M,FSTMSG ;YES, SAVE ITS ADDRESS
INCR NUMANS ;ACCOUNT FOR IT
POPJ P, ;AND RETURN
SUBTTL QUEFLS Subroutines to Flush the IPCF Receive Queue
QUEFLS: PUSHJ P,QUEQRY ;QUERY THE QUEUE
JUMPE T2,.POPJ## ;RETURN WHEN EMPTY
PUSHJ P,QUEIGN ;IGNORE THE ENTRY
JRST QUEFLS ;AND KEEP GOING
QUEQRY: SETZB T3,T4 ;CLEAR QUERY BLOCK
SETZB P1,P2 ;FOR GOOD MEASURE
MOVE T2,[4,,T3] ;LENGTH,,ARGUMENTS
IPCFQ. T2, ;FIND OUT WHATS THERE
SETZM P2 ;NOTHING, CLEAR P2
MOVE T2,P2 ;COPY QUEUE STATUS INTO T2
JUMPE T2,.POPJ## ;RETURN IF NOTHING THERE
SKIPE DEBUGW ;IF DEBUGGING,
CAME T4,INFPID ;COULD BE FROM INFO
CAMN T4,QSRPID ;FROM QUASAR
POPJ P, ;YES, RETURN NOW
PUSHJ P,QUEIGN ;FLUSH THE JUNK MAIL
JRST QUEQRY ;LOOK AGAIN
QUEIGN: ANDX T3,IP.CFV ;CLEAR ALL BUT PAGE MODE BIT
TXO T3,IP.CFT ;SET TO TRUNCATE
SETZB T4,P1 ;CLEAR THEM AGAIN
MOVEI P2,1 ;LENGTH = 0 , LOC = 1
MOVE T2,[4,,T3] ;SET UP LENGTH AND BLOCK ADDRESS
IPCFR. T2, ;THROW AWAY THE MESSAGE
N$FATE<CFR>,,<Cannot flush the IPCF receive queue>
POPJ P, ;RETURN
QUEWAT: PUSHJ P,QUEQRY ;FIND OUT WHATS THERE
JUMPN T2,.POPJ## ;SOMETHING, RETURN
MOVX T2,HB.IPC ;WAKE ON IPCF PACKET AVAILABLE
HIBER T2, ;WAIT FOR A REASONABLE TIME
JFCL ;WATCH THIS LOOP
JRST QUEWAT ;TRY NOW
SUBTTL GQPID Get the PID for QUASAR
GQPID: SKIPN DEBUGW ;ARE WE DEBUGGING?
JRST GQPI.1 ;NO, USE SYSTEM-QUASAR
PUSHJ P,MAKNAM ;MAKE UP NAME TO LOOK FOR
MOVE P2,T1 ;LENGTH AND POSITION OF PACKET
MOVX T1,SP.INF ;GET PID FOR SYSTEM-INFO
PUSHJ P,FPID ;
JUMPE T1,GQPI.1 ;IF NO INFO, GIVE UP
MOVE P1,T1 ;REMEMBER THE PID
MOVEM P1,INFPID ;
SETZB T3,T4 ;NO FLAGS, CLEAR PID
PUSHJ P,MSGGO ;SEND THE MESSAGE TO INFO
PUSHJ P,RCVACK ;WAIT FOR REPLY
LOAD T1,T3,IP.CFE ;CHECK FOR ERRORS
JUMPN T1,GQPI.1 ;
OUTSTR [ASCIZ /% Connecting to /]
OUTSTR SHTMSG+.IPCI2
PUSHJ P,TTCRLF ;ADD CRLF
MOVE T1,SHTMSG+.IPCI1 ;GET PRIVATE QUASAR'S PID
GQPI.4: MOVEM T1,QSRPID ;STORE THE PID
POPJ P, ;THEN RETURN
GQPI.1: SETOM T3 ;FLAG FOR FIRST TIME
GQPI.2: MOVX T1,SP.QSR ;PID OF QUASAR
PUSHJ P,FPID ;LOOK IT UP
JUMPN T1,GQPI.4 ;IF WE GOT THE PID , RETURN NOW
AOJN T3,GQPI.3 ;FIRST TIME IT FAILED?
N$WARN <WFQ>,,<Waiting for [SYSTEM]QUASAR to start>
GQPI.3: MOVEI T1,3 ;WAIT FOR 3 SECONDS
SLEEP T1, ;SLEEP FOR SPECIFIED TIME
JRST GQPI.2 ;AND TRY AGAIN
;GET PID FOR SYSTEM-INFO
;
FPID: HRLI T1,.GTSID ;WANT FROM SYSTEM PID TABLE
MOVSS T1
GETTAB T1, ;ASK FOR IT
SETZM T1 ;IF IT FAILS,
POPJ P, ;AND RETURN
SUBTTL BLDACK Build ACK Code Subroutine
;ACK CODE STORED IN ACKCOD
;
BLDACK: SETZM ACKCOD ;CLEAR TARGET
PJOB T1, ;GET OUR JOB NUMBER
STORE T1,ACKCOD,ACK.JB ;PUT IN PROPER PLACE
MOVX T1,%CNDTM ;GET UDT
GETTAB T1, ;ASK THE MONITOR
SETZM T1 ;OH WELL
STORE T1,ACKCOD,ACK.UT ;STORE IN UDT FIELD OF CODE
POPJ P, ;RETURN
SUBTTL GETOBJ Subroutine to Convert Device to an Object Type
;DEVICE NAME IN O.DEV, RETURN WITH T3 CONTAINING OBJECT
;
GETOBJ: HLLZ T3,O.DEV ;GET GENERIC DEVICE
MOVSI T4,-NDEVS ;MAKE AN AOBJN POINTER
GETO.1: CAMN T3,DEVTAB(T4) ;DO A COMPARE
JRST GETO.2 ;WIN
AOBJN T4,GETO.1 ;LOOP
JRST E.NOQS ;LOSE
GETO.2: MOVE T3,OBJTAB(T4) ;GET THE OBJECT
POPJ P, ;AND RETURN
SUBTTL MSGSND Subroutine to Send a Message to QUASAR
MSGSND: MOVE P1,QSRPID ;GET QUASAR'S PID
SETOM RTYCNT ;INIT RETRY COUNTER
MOVE T3,ACKCOD ;GET ACK CODE
MOVEM T3,.MSCOD(M) ;PUT IN MESSAGE HEADER
SETZB T3,T4 ;CLEAR FLAGS,MY PID
MOVEI P2,(M) ;MESSAGE ADDRESS, P1 = QSRPID
LOAD T2,.MSTYP(M),MS.CNT ;GET THE LENGTH OF THE MESSAGE
TXNN M,1B0 ;IS THIS A PAGE MODE REQUEST
JRST MSGGO1 ;NO, SEND IT
MOVX T3,IP.CFV ;INDICATE A PAGE SEND
LSH P2,-^D9 ;CONVERT 'M' TO A PAGE NUMBER
MOVEI T2,PAGSIZ ;LENGTH MUST BE 1000
MSGGO1: HRL P2,T2 ;INCLUDE CORRECT SIZE IN HEADER
MSGGO: MOVE T2,[4,,T3] ;ARGUMENT FOR SEND
IPCFS. T2, ;SEND THE MESSAGE
SKIPA ;FAILED, SEE WHY
POPJ P, ;RETURN TO CALLER
CAIE T2,IPCDD% ;QUASAR DISABLED
CAIN T2,IPCRS% ;OR MY QUOTA EXHAUSTED
JRST RETRY ;YES, TRY IT AGAIN
CAIE T2,IPCRR% ;QUASAR FULL
CAIN T2,IPCRY% ;OR SYSTEM FULL
JRST RETRY ;YES, TRY IT AGAIN
N$FATE <SQF>,,<Send to [SYSTEM]QUASAR failed>
RETRY: MOVEI T2,2 ;WAIT BEFORE TRYING AGAIN
SLEEP T2, ;TAKE A QUICK NAP
AOSN RTYCNT ;COUNT THE RETRIES
N$WARN <MBR>,,<Send has failed, message being re-sent>
JRST MSGGO ;NOW RETRY IT
SUBTTL RCVACK Subroutine to Receive an Expected "ACK" from QUASAR
; RVCACK RETURNS CALLER AFTER RECEIVING A"GOOD" ONE,
; ISSUES AN ERROR MESSAGE AND QUITS ON A "BADDY"
;
RCVACK: MOVEI M,SHTMSG ;AREA FOR SHORT RECEIVE
PUSHJ P,QUEWAT ;WAIT FOR A RETURNED MESSAGE
ANDX T3,IP.CFV ;CLEAR ALL BUT THE PAGE MODE BIT
SETZB T4,P1 ;CLEAR THESE AGAIN
HRRI P2,(M) ;WHERE TO RECEIVE INTO
TXNN T3,IP.CFV ;IS IT A PAGE
JRST RCVA.1 ;NO, GO GET IT
MOVE M,.JBREL## ;GET A PAGE TO RECEIVE INTO
MOVEI M,PAGSIZ-1(M) ;ROUND UP
ADR2PG M ;CONVERT TO PAGE NUMBER
HRRI P2,(M) ;SET THE ADDRESS
HRLI P2,PAGSIZ ;LENGTH OF A PAGE
PG2ADR M ;STILL NEED TO POINT TO IT
RCVA.1: MOVE T2,[4,,T3] ;READY TO GET IT
IPCFR. T2, ;GET THE ACK FROM QUASAR
SKIPA ;CAN'T
JRST RCVA.A ;ENTER COMMON CODE
CAXN T2,IPCUP% ;OUT OF CORE ?
N$FATE<NEC>,,<Not enough core to receive acknowledgement>
N$FATE<ARF>,,<Acknowledgement receive failed>
RCVA.A: SKIPN DEBUGW ;DEBUGGING?
JRST RCVA.0 ;NO
MOVE T2,.IPCI0(M) ;GET POSSIBLE CODE WORD
CAMN T2,[MAKNAM,,.IPCIW] ;AND CHECK IT
POPJ P, ;RETURN NOW ON A MATCH
RCVA.0: MOVE T2,ACKCOD ;GET ACK CODE WE'RE EXPECTING
CAME T2,.MSCOD(M) ;IS IT?
JRST RCVACK ;NO, IGNORE IT
LOAD T2,.MSFLG(M) ;GET THE MESSAGE STATUS WORD
TXNE T2,MF.NOM ;NORMAL "ACK" (NO MESSAGE ASSOCIATED)
JRST RCVA.3 ;YES, SEE IF IT IS TIME TO RETURN
TXNE T2,MF.MOR ;FIRST OF MANY
JRST RCVACK ;NO, THROW THIS AWAY
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
RCVA.4: TXNN T2,MF.FAT!MF.WRN ;FATAL OR WARNING
JRST RCVA.2 ;NEITHER
MOVEI T3,"?" ;FATAL CHARACTER
TXNN T2,MF.FAT ;WAS IT FATAL?
MOVEI T3,"%" ;NO, LOAD WARNING CHARACTER
OUTCHR T3 ;OUTPUT THE "?" OR "%"
OUTSTR [ASCIZ/QSR/] ;OUTPUT "QUASAR" PREFIX
LOAD T3,.MSFLG(M),MF.SUF ;GET THE MESSAGE SUFFIX
HRLZS T3 ;INTO THE OTHER SIDE FOR TTYSIX
PUSHJ P,TTYSIX ;OUTPUT THE FULL ERROR CODE
MOVEI T3," " ;GET ALIGNMENT CHARACTER
OUTCHR T3 ;MAKE THE OUTPUT PRETTY
RCVA.2: OUTSTR .OHDRS+ARG.DA(M) ;AND FINALLY, OUTPUT THE MESSAGE
PUSHJ P,TTCRLF ;END THE MESSAGE
TXNE T2,MF.FAT ;AGAIN, WAS IT FATAL
JRST RCVA.5 ;YES, QUIT NOW
RCVA.3: TXNE T2,MF.MOR ;MORE COMING
JRST RCVACK ;YES, DO THIS ALL OVER AGAIN
POPJ P, ;CONTINUE PROCESSING
RCVA.5: MONRT. ;EXIT AFTER THE OUTPUT
N$FATE<CNC>,,<Can't CONTINUE -- try REENTER>
;TTY OUTPUT SUBROUTINES
;
TTCRLF: OUTSTR [BYTE (7) .CHCRT, .CHLFD, 0]
POPJ P,
TTYSIX: MOVE T4,[POINT 6,T3] ;THE INITIAL BYTE POINTER
TYSIX1: ILDB P1,T4 ;GET A CHARACTER
JUMPE P1,.POPJ## ;STOP AT A NULL (BLANK)
ADDI P1," " ;ASCII-IZE IT
OUTCHR P1 ;DUMP IT OUT
TLNE T4,770000 ;END OF THE WORD
JRST TYSIX1 ;NO, GET ANOTHER
POPJ P, ;ALL DONE
SUBTTL MAKNAM Subroutine to Make Up the Packet to Send to INFO
;LOOK FOR [USER-NAME]QUASAR
;
MAKNAM: PUSH P,T3 ;SAVE SOME REGS
PUSH P,T4 ;
SKIPL T2,DEBUGW ;GET AND CHECK DEBUGW
TLNN T2,377777 ;IF SET ASSUME WE GOT A PPN IN THERE
GETPPN T2, ;GET THE PPN
JFCL ;INFAMOUS SKIP RETURN
MOVEI T1,SHTMSG+1 ;AREA TO CLEAR
HRLI T1,-1(T1) ;BLT POINTER
SETZM SHTMSG ;
BLT T1,SHTMSG+PAGSIZ-1 ;CLEAR IT
MOVE T1,[MAKNAM,,.IPCIW] ;GET INFO FUNCTION
MOVEM T1,SHTMSG+.IPCI0 ;STORE IT
SETZM SHTMSG+.IPCI1 ;NO ONE TO COPY
MOVEI T1,SHTMSG+.IPCI2 ;GET LOCATION TO PUT NAME INTO
HRLI T1,(POINT 7,) ;MAKE IT A POINTER
MOVEI T3,"[" ;OPEN BRACKET
IDPB T3,T1 ;STORED
PUSH P,T2 ;SAVE THE PPN
HLRZ T3,T2 ;GET THE PROJ NUMBER
PUSHJ P,OCTNAM ;OUTPUT IT
MOVEI T2,"," ;SEPARATING COMMA
IDPB T2,T1 ;STORE IT
POP P,T3 ;RESTORE THE PPN
ANDI T3,-1 ;ONLY PROG NUMBER
PUSHJ P,OCTNAM ;ADD TO THE NAME
MOVE T3,[POINT 7,[ASCIZ /]QUASAR/]] ;END OF NAME
MAKN.1: ILDB T4,T3 ;GET A BYTE
IDPB T4,T1 ;STORE THE BYTE
JUMPN T4,MAKN.1 ;REPEAT , INCLUDING NULL
HRRZS T1 ;ISOLATE THE ADDRESS
SUBI T1,SHTMSG-1 ;GET LENGTH
HRLI T1,SHTMSG ;WHERE THE PACKET STARTS
MOVSS T1 ;GET LEN,,ADDR
POP P,T4 ;RESTORE ACS USED
POP P,T3
POPJ P, ;AND RETURN
OCTNAM: IDIVI T3,8 ;OCTAL DIVIDE ROUTINE
HRLM T4,0(P) ;USUAL ROUTINE
SKIPE T3 ;DONE?
PUSHJ P,OCTNAM ;NO GO AGAIN
HLRZ T3,0(P) ;GET A DIGIT
ADDI T3,"0" ;ASCII-IZE IT
IDPB T3,T1 ;STORE IT
POPJ P, ;AND RETURN
SUBTTL DFDEST and DFPROC Routines
;DFDEST - DEFAULT /DEST TO USER LOCATION
;
DFDEST: MOVE T3,S.DEST ;GET /DEST FROM USER
CAME T3,[-1] ;SEE IF DEFAULT NEEDED
POPJ P, ;NO--RETURN
MOVSI T3,'OPR' ;YES--FIND HIS LOGICAL OPR
WHERE T3, ;ASK MONITOR
SETOM T3 ;NO NETWORK SUPPORT
MOVEM T3,S.DEST ;STORE /DEST
POPJ P, ;AND RETURN
;DFPROC - DEFAULT /PROC TO CENTRAL SITE
;
DFPROC: MOVE T3,S.PROC ;GET /PROC FROM USER
CAME T3,[-1] ;SEE IF DEFAULT NEEDED
POPJ P, ;NO--RETURN
MOVSI T3,'CTY' ;YES--FIND HIS CENTRAL SITE
WHERE T3, ;ASK MONITOR
SETOM T3 ;NO NETWORK SUPPORT
MOVEM T3,S.PROC ;STORE /PROC
POPJ P, ;AND RETURN
SUBTTL SETNOD Routine to Convert/Default a node Name/Number
SETNOD: CAME T1,[-1] ;DID WE DEFAULT IT TO -1.
TLNN T1,600000 ; OR IS THE NUMBER BINARY ???
POPJ P, ;YES,,RETURN NOW.
MOVE T4,T1 ;SAVE THE NODE NAME/NUMBER
SETZM T2 ;ZERO A WORK AC
ROTC T1,6 ;GET 6 BITS IN T2
CAIGE T2,'0' ;IS IT A NUMBER ???
JRST SETN.4 ;NO,,SEND THE GUY AN ERROR MSG
CAILE T2,'7' ;IS IT OCTAL ???
JRST SETN.3 ;NO,,GO CHECK FOR ALPHA
SETZM T4 ;ZERO ANOTHER WORK AC
SETN.1: SUBI T2,'0' ;MAKE THE NUMBER BINARY
LSH T4,3 ;MAKE ROOM FOR IT IN T4
ADD T4,T2 ;ADD IT IN
SETZM T2 ;ZERO THE AC AGAIN
ROTC T1,6 ;GET ANOTHER 6 BITS
JUMPE T2,SETN.2 ;DONE???,,SAVE IT AND RETURN
CAIL T2,'0' ;VALIDATE THE
CAILE T2,'7' ;NUMBER.......
JRST SETN.4 ;NO GOOD,,GEN AN ERROR
JRST SETN.1 ;ELSE CONTINUE ON
SETN.2: SKIPE T1,T4 ;ANY NUMBER YET?
POPJ P, ;YES--RETURN
MOVSI T1,'CTY' ;NO--CONVERT 0
WHERE T1, ;INTO CENTRAL SITE
SETOM T1 ;LOSE
POPJ P, ;AND RETURN
SETN.3: CAIL T2,'A' ;IS IT VALID ALPHA ??
CAILE T2,'Z' ;HERE ALSO
SETN.4: N$FATE <INS>,,<Invalid Node Specified>
SETN.5: SETZM T2 ;ZERO THE WORK AC
ROTC T1,6 ;GET ANOTHER 6 BITS
JUMPE T2,SETN.6 ;NO MORE,,STOP
CAIL T2,'0' ;IS IT LESS THEN 0
CAILE T2,'Z' ;OR GREATER THEN Z
JRST SETN.4 ;YES,,THEN AN ERROR
CAILE T2,'9' ;OR IS IT BETWEEN 9
CAIL T2,'A' ;AND 'A' ???
JRST SETN.5 ;NO,,KEEP ON GOING
JRST SETN.4 ;ELSE THERE IS AN ERROR
SETN.6: MOVEI T3,2 ;GET ARG BLOCK LENGTH
MOVE T1,[XWD .NDRNN,T3] ;NAME TO NUMBER FUNCTION
NODE. T1, ;CONVERT THE NODE NAME
JRST SETN.7 ;CAN'T, CHECK FOR ANF SOFTWARE
POPJ P, ;RETURN, NODE NUMBER IN T1
SETN.7: CAMN T1,[XWD .NDRNN,T3] ;AC UNCHANGED ???
N$FATE <DSI>,,<DESTINATION SWITCH ILLEGAL>;YES, NO ANF SUPPORT
MOVE T1,T4 ;GET NAME IN T1, LET QUASAR CONVERT
POPJ P, ;RETURN
SUBTTL GCORE Subroutine
;GCORE. -- GET CORE STARTING AT .JBFF
;CALL: GCORE N
;RETURN WITH T1=END OF AREA
;
GCORE.: ADDB T1,.JBFF## ;ADVANCE .JBFF THE SPACE
GCORE1: MOVE T1,.JBFF## ;GET NEW CORE SIZE
CAMG T1,.JBREL## ;SEE IF STILL IN CORE
SOJA T1,.POPJ ;RETURN POINTING TO LAST
CORE T1, ;NO--ASK MONITOR FOR MORE
JRST .+2 ;IF FAIL
JRST GCORE1 ;IF WON, LOOP BACK TO EXIT
MOVEI T1,[ASCIZ /
? Insufficient core in QUEUE
/]
PUSHJ P,.TSTRG##
CLRBFI ;CLEAR TYPEAHEAD
PUSHJ P,.MONRT## ;RETURN TO MONITOR
JRST GCORE1 ;AND LOOP BACK
SUBTTL GTTABS GETTAB Subroutines
;GTTABS IS DRIVEN BY THREE TABLES GENERATED BY THE "TABS" MACRO.
; THE FIRST TABLE CONTAINS THE ARGUMENT TO GETTAB, THE SECOND,
; CONTAINS DEFAULTS TO USE ON FAILURE, AND THE THIRD CONTAINS
; AN INSTRUCTION WHICH IS EXECUTED TO STORE THE RESULTS.
GTTABS: MOVSI T2,-.NMTAB ;MAKE AN AOBJN POINTER
GTTAB1: MOVE T1,GTAB1(T2) ;GET AN ARGUMENT
GETTAB T1, ;DO THE GETTAB
MOVE T1,GTAB2(T2) ;GET THE DEFAULT
XCT GTAB3(T2) ;STORE THE RESULT
AOBJN T2,GTTAB1 ;AND LOOP
POPJ P, ;RETURN WHEN DONE
;THE ARGUMENTS TO THE TABS MACRO ARE:
; 1) ARGUMENT TO GETTAB
; 2) DEFAULT VALUE
; 3) INSTRUCTION TO STORE RESULT
; (NOTE: MACRO EXPANSION GENERATES THE CORRECT AC FIELD
; THEREFORE IT SHOULD BE BLANK IN THE ARGUMENT)
;
DEFINE TABS,<
T <%NSCMX>,<0>,<MOVEM G$CMAX>
T <%CNMMX>,<0>,<MOVEM G$MNMX>
T <-1,,.GTNM1>,<0>,<MOVEM G$NAM1>
T <-1,,.GTNM2>,<0>,<MOVEM G$NAM2>
> ;END DEFINE TABS
;NOW GENERATE THE TABLES
DEFINE T(A,B,C),<
EXP <A>
>
GTAB1: TABS
.NMTAB==.-GTAB1
DEFINE T(A,B,C),<
EXP <B>
>
GTAB2: TABS
DEFINE T(A,B,C),<
EXP <C> + <T1>B12
>
GTAB3: TABS
SUBTTL GTCLIN Command Scanning Subroutines
;GTCLIN -- GET AND CLEAR ONE INPUT FILE PARAMETER STORAGE AREA
;CALL: PUSHJ P,GTCLIN
;RETURNS WITH T1=START OF AREA, T2=LENGTH OF AREA
;USES T3
;
GTCLIN: MOVE T2,.JBFF## ;START AT .JBFF
GCORE I.LZER ;GET ONE AREA
MOVEI T1,1(T1) ;ADVANCE ONE AND
MOVEM T1,I.NXZR ;SAVE NEW END
SETZM (T2) ;CLEAR AREA
HRLZI T3,(T2) ; ..
HRRI T3,1(T2) ; ..
BLT T3,-1(T1) ; ..
SETOM .FXBFR(T2) ;CLEAR FIRST SWITCH (-1 MEANS NONE SPYC)
HRLZI T3,.FXBFR(T2) ;GET ADR,,0
HRRI T3,.FXBFR+1(T2) ;GET ADR,,ADR+1
BLT T3,.FXLEN(T2) ;AND RESET ALL SWITCHES
MOVE T1,T2 ;POSITION RESULT
MOVEI T2,I.LZER ;GET LENGTH
POPJ P, ;RETURN
;HERE TO READ IN SIGNED DECIMAL NUMBER (/DEPENDENCY)
;
DEPSW: PUSHJ P,.TIAUC## ;GET SIGN IF PRESENT
MOVEI T2,0 ;CLEAR FLAGS
CAIN C,"+" ;SEE IF INCREMENT
TRO T2,1B19 ;YES--SET FLAG
CAIN C,"-" ;SEE IF DECREMENT
TRO T2,1B18 ;YES--SET FLAG
TRNE T2,MI.DMT ;SEE IF EITHER SET
PUSHJ P,.TIAUC## ;YES--GET ONE MORE CHARACTER
PUSHJ P,.DECNC## ;GET NUMBER
JUMPL N,E.SVTL ;ERROR IF NEGATIVE
CAIL N,MI.DMT ;MAKE SURE IT'S SMALL ENOUGH
JRST E.SVTL ;NO--GIVE ERROR
IOR N,T2 ;COMBINE FLAGS
PJRST .SWDPB## ;GO STORE RESULT
;HERE WHEN SWITCH VALUE IS A RADIX-60 SPECIFICATION (/TIME)
;
TIMESW: PUSHJ P,RDX60W ;GET RADIX 60 NUMBER
PJRST .SWMAX## ;AND STORE ANSWER
;HERE ON /METERS
;
METESW: PUSHJ P,.SWDEC## ;GET DECIMAL ARGUMENT
PUSH P,N+1 ;SAVE THE AC FOR THE DIVIDE
IMULI N,^D3937 ;CONVERT TO CENTI-INCHES
IDIVI N,^D1200 ;CONVERT TO FEET
POP P,N+1 ;RESTORE N+1
PJRST .SWMAX## ;AND STORE THE ANSWER
;HERE ON /UNIT OR /STREAM SWITCH
;
UNITSW: PUSHJ P,.TIALT## ;GET NEXT CHARACTER
MOVE T1,C ;COPY IT
PUSHJ P,.REEAT## ;AND BACKUP ONE
CAIL C,"0" ;RANGE
CAILE C,"7" ; CHECK
JRST UNITYP ;GO PROCESS UNIT TYPE
PUSHJ P,.SWOCT## ;GET THE SWITCH VALUE
HRLI N,%PHYCL ;MARK AS PHYSICAL DEVICE
MOVEM N,S.ATTR ;SAVE IN ATTRIBUTE WORD
SETZM S.UNTY ;CLEAR OUT POSSIBLE UNIT TYPE
JRST .SWDON## ;RETURN WITHOUT STORE
UNITYP: PUSHJ P,.SIXSW## ;GET SIXBIT QUANTITY
MOVEM N,S.UNTY ;SAVE UNIT TYPE
JRST .SWDON## ;RETURN WITHOUT STORE
;HERE ON /QUEUE SWITCH
;
IFN FTDQS,< ;ONLY IF DQS VERSION
QNMSW: PUSHJ P,.TIALT## ;PRINT THE PUMP
PUSHJ P,.TICQT## ;CHECK FOR QUOTING
SETZM .NMUL## ;CLEAR ACCUMULATOR
MOVE T1,[.NMUL##,,.NMUL##+1]
BLT T1,.NMUE##
HRROI T1,.T8STR## ;SET ASCII STRING FORMAT
MOVEM T1,.LASWD## ; FOR ERROR PRINTING
MOVE T1,[POINT 8,.NMUL##] ;INITIALIZE BYTE POINTER
QNMSW1: PUSHJ P,.TIMUC## ;MAKE SURE IT'S UPPER CASE
SKIPLE .QUOTE## ;SEE IF IN QUOTED STRING
JRST QNMSW2 ;YES--JUST GO STORE
CAIE C,.CHCNV ;IF SUPERQUOTE
SKIPN .VQUOT## ;OR SUPER-QUOTED
JRST QNMSW2 ;THEN PASS THE CHARACTER
PUSHJ P,.TICAN## ;SEE IF LEGITIMATE ALPHA-NUMERIC
SKIPA ;NO
JRST QNMSW2 ;YES
CAIE C,"$" ;CHECK OTHER LEGAL ONES
CAIN C,"_" ;VAX COMPATIBILITY
JRST QNMSW2 ;GOOD
PJRST .SWDPB## ;GO STORE RESULT
QNMSW2: CAMN T1,[POINT 8,.NMUE##,31] ;SEE IF OVERFLOW
N$FATE <OVF>,,<Input string exceeds the size of input buffer>
IDPB C,T1 ;NO--STORE
PUSHJ P,.TIALT## ;GET NEXT CHARACTER
JRST QNMSW1 ;LOOP BACK TO PROCESS IT
>; END IFN FTDQS
DEFINE SWTCHS,<
XLIST
SP ACCOUNT,S.ACCT,ACCTSW,,FS.VRQ
SP AFTER,S.AFT,.SWDTF##,AFT,FS.VRQ!FS.NFS
SN ALLFILES,S.ALLF
SL ASSISTANCE,S.ASST,ASST,ASSTYES
SL *BATLOG,S.BATL,BATL,BATLAPPEND
SP BATOPT,S.BATO,.SWSIX##,,FS.VRQ!FS.NFS
SP BEGIN,F.STRT,.SWDEC##,STR,FS.VRQ
SP CARDS,S.LCDP,.SWDEC##,CDP,FS.VRQ!FS.NFS!FS.LRG
IFN FTDQS,<
SP CHARACTERISTICS,<POINT <^D65-CHRSIZ>,S.CHAR>,.SWASQ##,,FS.VRQ
>; END IFN FTDQS
SN *CHECK,S.CHK,FS.NFS
SP COPIES,<POINTR(F.MOD,FP.FCY)>,.SWDEC##,COP,FS.VRQ
SP CORE,S.COR,.SWCOR##,COR,FS.LRG!FS.VRQ
SS CREATE,S.OPN,.QORCR
SN DEFERRED,S.DFR
SS DELETE,<POINTR(F.MOD,FP.DSP)>,DISPDELETE
SP DEPENDENCY,S.DPN,DEPSW,DPN,FS.VRQ
SP DESTINATION,S.DEST,.SWSIX##,NOD,FS.VRQ
SL DISPOSE,<POINTR(F.MOD,FP.DSP)>,DISP,DISPPRESERVE
SP DISTRIBUTION,<POINT 55,S.DIST>,.SWAS8##,,FS.VRQ
SS ERBINARY,<POINTR(F.MOD,FP.OKB)>,0
SS *FAST,S.LIST,LISTFAST
SP FEET,S.LPTP,.SWDEC##,PTP,FS.LRG
SL FILE,<POINTR(F.MOD,FP.FFF)>,FILE,FILEASCII
SP FONT,<POINT <^D65-FNMLTH>,F.FONT>,.SWASQ##,,
IFE FTDQS,<
SP FORMS,S.FRM,.SWSIX##,,FS.VRQ
>; END IFN FTDQS
IFN FTDQS,<
SP FORMS,<POINT <^D65-FRMSIZ>,S.FRM>,.SWSXQ##,,FS.VRQ
>; END IFN FTDQS
SS GENERIC,S.ATTRIB,<INSVL.(%GENRC,RO.ATR)>,FS.LRG
SN HEADER,<POINTR(F.MOD,FP.NFH)>
SP JOBNAME,S.JOB,.SWSIX##,,FS.VRQ
SS KILL,S.OPN,.QORKL
SP LIMIT,S.LIM,.SWDEC##,LIM,FS.LRG
SS LOWERCASE,S.ATTRIB,<INSVL.(%LOWER,RO.ATR)>,FS.LRG
SL *LIST,S.LIST,LIST,LISTJOBS
SP METERS,S.LPTP,METESW,PTP,FS.LRG
SS *MODIFY,S.OPN,.QORMD
SN NEW,<POINTR(F.MOD,FP.NEW)>
SP NOTES,<POINT 63,S.NOT>,.SWSXQ##,,FS.VRQ
SN NOTIFY,S.NTF
SN NULL,S.NULL
SS OKBINARY,<POINTR(F.MOD,FP.OKB)>,1
SL OUTPUT,S.OUT,OUTP,INPLOG
SP PAGES,S.LLPT,.SWDEC##,LPT,FS.LRG
SP PATH,DEFFIL,.SWFIL##,PTH,FS.VRQ
SL PLOT,<POINTR(F.MOD,FP.FPF)>,PLOT,PLOTIMAGE
SS PRESERVE,<POINTR (F.MOD,FP.DSP)>,DISPPRESERVE
SL PRINT,<POINTR(F.MOD,FP.FPF)>,PRIN,PRINARROW
SP PRIORITY,S.PRI,.SWDEC##,PRI
SP PROCESSING,S.PROC,.SWSIX##,NOD,FS.VRQ
SL PUNCH,<POINTR(F.MOD,FP.FPF)>,PUNC,PUNCASCII
IFN FTDQS,<
SP QUEUE,<POINT <^D65-QNMLEN>,S.QNM>,QNMSW,,FS.VRQ
>; END IFN FTDQS
SN READER,S.RDR
IFN FTDQS,<
SN REMOTE,S.RMT
>; END IFN FTDQS
SP REPORT,<POINT 63,F.RPT>,.SWSXQ##,,FS.VRQ
SP REQUESTID,S.RID,.SWDEC##,RID
SN RESTARTABLE,S.RSTR
SP SEQUENCE,S.SEQ,.SWDEC##,SEQ
SS SITGO,S.ATTRIB,<INSVL.(%SITGO,RO.ATR)>,FS.LRG
SP STREAM,S.ATTRIB,UNITSW,UNT
SL *SPACING,<POINTR(F.MOD,FP.FSP)>,SPAC,SPACSINGLE
SP TAG,F.STRT,.SWSIX##,,FS.VRQ!FS.NFS
SL TAPE,<POINTR(F.MOD,FP.FPF)>,TAPE,TAPEASCII
SP TIME,S.LTIM,TIMESW,TIM,FS.LRG
SP TPLOT,S.LPLT,.SWDEC##,PLT,FS.LRG
SL *UNIQUE,S.UNIQ,UNIQ,UNIQYES
SP UNIT,S.ATTRIB,UNITSW,UNT
SS UPPERCASE,S.ATTRIB,<INSVL.(%UPPER,RO.ATR)>,FS.LRG
SP USERNAME,<POINT 55,S.USER>,.SWAS8##,,FS.VRQ
LIST
>
;NOW BUILD THE TABLES FROM THE SWTCHS MACRO
DOSCAN(SWTCH)
;KEY WORD VALUES
KEYS ASST,<YES,NO>
KEYS BATL,<APPEND,SUPERSEDE,SPOOL>
KEYS DISP,<PRESERVE,RENAME,DELETE>
KEYS FILE,<ASCII,FORTRAN,COBOL,$$,%%,ELEVEN>
KEYS LIST,<ALL,FAST,JOBS,SUMMARY>
KEYS OUTP,<NOLOG,LOG,ERROR>
KEYS PLOT,<IMAGE,ASCII,BINARY>
KEYS PRIN,<ARROW,ASCII,OCTAL,SUPPRESS,GRAPHICS>
KEYS PUNC,<ASCII,026,BINARY,BCD,IMAGE>
KEYS SPAC,<SINGLE,DOUBLE,TRIPLE>
KEYS TAPE,<ASCII,IMAGE,IBINARY,BINARY>
KEYS UNIQ,<0,NO,1,YES>
SUBTTL QUETYP Identify What Type of QUEUE Has Been Specified
;CALL: PUSHJ P,QUETYP
; RETURNS T1=-1 IF /LIST REQUEST
; 0 IF INP:
; 1+IF OUTPUT QUEUES IN ORDER OF QUEUES MACRO
;
; ALSO RETURNS O.DEV AND QTYPE UPDATED
;USES T2, T3, T4
;
;WARNING: THIS ROUTINE IS CALLED BEFORE AND AFTER THE DEFAULTER, SO
; IT MAY BE LOOKING AT UNDEFAULTED DATA.
;
QUETYP: MOVEI T1,.QORLS ;MAY NEED TO SET /LIST
SKIPL S.LIST ;SEE IF /LIST:VALUE
SKIPLE S.OPN ;YES--SEE IF SOME OTHER OPERATION
JRST .+2 ;YES--DO OTHER ONE
MOVEM T1,S.OPN ;NO--SET /LIST
SETOM T1 ;SET ANSWER IF /LIST
MOVE T2,S.OPN ;GET OPERATION CODE
CAIN T2,.QORLS ;SEE IF /LIST
JRST QUETY1 ;YES, RETURN THE ANSWER
PUSH P,N ;SAVE N
SKIPGE O.MOD ;SEE IF NULL DEVICE
SETZM O.DEV ;YES--CLEAR IT OUT
....==FX.NDV
SKIPN N,O.DEV ;NO--GET OUTPUT DEVICE
SKIPE N,DQTYPE ;USE DEFAULT FROM COMMAND
SKIPA ;OK
MOVSI N,'LPT' ;DEFAULT DEVICE
PUSHJ P,XPNQUE ;EXPAND AND MATCH QUEUE NAME
MOVEM N,O.DEV ;AND STORE IT
POP P,N ;RESTORE NAME
MOVEI T1,(T1) ;CHANGE TO INDEX
SUBI T1,QUENMT ; ..
QUETY1: MOVEM T1,QTYPE ;STORE AWAY THE ANSWER
POPJ P, ;AND RETURN
DEFINE QQ(A,B),<
SIXBIT /A/
>
QUENMA: SIXBIT /ALL/ ;FOR LISTING ONLY
QUENMT: QUEUES
QUENML==.-QUENMT
SUBTTL XPNQUE Expand QUEUE Name Abbreviation If Any
;CALL: MOVE N,NAME IN SIXBIT AS TYPED IN
; PUSHJ P,XPNQUE
; RETURN WITH UPDATED N
; AND WITH T1 = ADDRESS OF ENTRY
; USES M, T2, T3, T4
;
XPNQUE: MOVS T1,N ;COPY OVER THE ARGUMENT
ANDI T1,777700 ;AND TO FIRST TWO CHARS
CAIE T1,'LL ' ;IS IT LL
CAIN T1,'LU ' ;OR LU?
JRST XPNQU2 ;YES, JUMP
TRNE N,-1 ;IS RIGHT-HALF NULL?
JRST XPNQU1 ;NO, A BIG NAME
MOVE T1,[IOWD QUENML+1,QUENMA]
PUSHJ P,.NAME## ;GET LOOK FOR A MATCH
JRST E.IQN ;ILLEGAL QUEUE NAME
MOVE N,0(T1) ;GET REAL NAME
POPJ P, ;AND RETURN
XPNQU1: PUSH P,N ;SAVE THE ARGUMENT
TRZ N,-1 ;ZAP RH
MOVE T1,[IOWD QUENML+1,QUENMA]
PUSHJ P,.NAME## ;FIND IT
JRST E.IQN ;ILLEGAL QUEUE NAME
POP P,N ;OK, RESTORE REAL NAME
POPJ P, ;AND RETURN
XPNQU2: MOVEI T1,QTPLPT+QUENMT ;LU AND LL ARE LPTS
POPJ P, ;RETURN
SUBTTL ACCTSW Scan ACCOUNT Switch Processing Routine
ACCTSW: PUSHJ P,.SWASQ##
MOVE T3,S.ACCT ;HAS ACCOUNT STRING BEEN SPECIFIED ??
CAME T3,[-1] ;IF -1 THEN ITS OK
POPJ P, ;IF NOT -1 THEN ALREADY SET !!!
SETZM S.ACCT ;RESET THE ACCOUNT FLAG
MOVE T3,[POINT 7,.NMUL##]
MOVE T4,[POINT 7,S.ACCT]
MOVEI P1,^D39 ;MAX # OF CHARACTERS IN ACCT STRING
ACCTS1: ILDB P2,T3
JUMPE P2,.POPJ1## ;NOTE THAT VALIDATION IS DONE LATER
CAIGE P2,176 ;NO. CHECK FOR ILLEGAL CHARACTERS
CAIGE P2," "
ACCTS2: N$FATE <ICS>,<N>,<Illegal Character Specified in /ACCOUNT Switch>
IDPB P2,T4
SOJGE P1,ACCTS1
JRST ACCTS2 ;TOO MANY CHARACTERS
SUBTTL RDX60W Input Time Subroutines
; Input a time. Legal formats are /TIME:seconds or /TIME:hh:mm:ss
; Call: PUSHJ P,RDX60W
;
; On return, N:= time
;
RDX60W: PUSHJ P,.SAVE2## ;SAVE OUR P1 AND P2
SETZB P1,P2 ;CLEAR COUNTER, RESULT
RDX6.1: PUSHJ P,.DECNW## ;GET A NUMBER
JUMPL N,RDX6.2 ;CHECK FOR ILLEGAL NUMBERS
CAILE N,^D60 ;A REASONABLE NUMBER?
JUMPN P1,RDX6.4 ;NO - MUST HAVE GIVEN TIME IN SECONDS
;(BUT HOURS CAN BE GREATER THAN 60)
IMULI P2,^D60 ;SHIFT SOME
ADDI P2,(N) ;ADD IN FIELD
CAIE C,":" ;FIELD SEPARATOR?
JRST RDX6.3 ;NO - MUST BE END OF TIME SPEC
CAIG P1,2 ;TOO MANY FIELDS?
AOJA P1,RDX6.1 ;NO - GET ANOTHER FIELD
RDX6.2: N$FATE <IFT>,,<Illegal format in time specification>
RDX6.3: MOVE N,P2 ;GET RESULT
POPJ P, ;RETURN
RDX6.4: CAIN C,":" ;FIRST TIME COMPONENT TOO LARGE?
JRST E.TCT ;YES
JUMPE P1,.POPJ## ;LARGE FIRST COMPONENT LEGAL (SECONDS)
N$FATE <TCT>,<D>,<Time component too large>
SUBTTL Fatal Error Message Routines
;NFMSG -- ISSUE FATAL MESSAGE AND RESTART JOB
; CALLED BY N$FATE MACRO
;
NFMSG: MOVEI T2,.POPJ## ;NULL ROUTINE
JRST NFMSXE ;GO DO THE REST
;NFMSGN -- ISSUE FATAL MESSAGE, TYPE N IN SIXBIT, AND RESTART JOB
; CALLED BY N$FATE MACRO
;
NFMSGN: MOVEI T2,.TSIXN## ;THE ROUTINE TO CALL
JRST NFMSXE ;GO DO THE REST
;NFMSGD -- ISSUE FATAL MESSAGE, TYPE N IN DECIMAL, AND RESTART JOB
; CALLED BY N$FATE MACRO
;
NFMSGD: MOVEI T2,.TDECW## ;THE ROUTINE TO CALL
JRST NFMSXE ;AND GO FINISH UP
;NFMSGO -- ISSUE FATAL MESSAGE, TYPE N IN OCTAL, AND RESTART JOB
; CALLED BY N$FATE MACRO
;
NFMSGO: MOVEI T2,.TOCTW## ;THE OCTAL ROUTINE
;AND FALL INTO NFMSXE
;HERE TO PRINT THE MESSAGE AND CALL THE ROUTINE SETUP ABOVE
;
NFMSXE: PUSH P,T2 ;SAVE T2 FOR LATER
MOVE T2,(T1) ;GET CODE IN T2
MOVEI T1,1(T1) ;GET PC+1 INTO T1
EXCH T1,T2 ;SWAP THEM
HRLI T1,'QUE' ;GET A PREFIX
HRLI T2,"?" ;GET A QUESTION MARK
PUSHJ P,.ERMSG## ;TYPE THE ERROR MESSAGE
PUSHJ P,.TSPAC## ;TYPE A SPACE
POP P,T2 ;GET THE ROUTINE BACK
MOVE T1,N ;GET THE ARGUMENT
PUSHJ P,(T2) ;CALL IT
NFMSX1: PUSHJ P,.CLRBF## ;CLEAR OUT TYPE AHEAD
PUSHJ P,.TCRLF## ;TYPE A CRLF
PUSHJ P,.TCRLF## ;AND ANOTHER ONE
MOVE P,[IOWD LN$PDL,PDLST] ;RESET PDL
JRST QUELOP ;AND START OVER
SUBTTL Non-fatal Error Message Routines
;WARNING MESSAGES
;
FWARNN: PUSH P,N ;SAVE N
HRLI N,.TSPAC## ;ROUTINE TO CALL
JRST FWARN1 ;AND CONTINUE
FWARN: PUSH P,N ;SAVE N
HRLI N,.TCRLF## ;ROUTINE TO CALL
;AND FALL INTO COMMON CODE
FWARN1: HRR N,-1(P) ;GET ADDRESS OF ARGS
PUSHJ P,.PSH4T## ;SAVE SOME ACS
HLRZ T1,0(N) ;GET CODE
HRLI T1,'QUE' ;FILL IN CONSTANT PART
HRRZ T2,0(N) ;GET ADR OF MESSAGE
HRLI T2,"%" ;GET PREFIX
PUSHJ P,.ERMSG## ;TYPE THE MESSAGE
MOVSS N ;GET ADR OF ROUTINE IN RH
PUSHJ P,(N) ;CALL IT
PUSHJ P,.POP4T## ;RESTORE SOME ACS
POP P,N ;RESTORE N
PJRST .POPJ1## ;AND SKIP BACK OVER ARGS
;INFORMATION
;
FINFON: PUSH P,N ;SAVE N
HRLI N,.TSPAC## ;GET ADDRESS OF ROUTINE
JRST FINFO1 ;AND CONTINUE
FINFO: PUSH P,N ;SAVE N
HRLI N,FINFO2 ;ADDRESS OF ROUTINE
;AND FALL THRU
FINFO1: HRR N,-1(P) ;GET ADDRESS OF ARGS
PUSHJ P,.PSH4T## ;SAVE SOME ACS
HLRZ T1,0(N) ;GET CODE
HRLI T1,'QUE' ;FILL IN CONSTANT PART
HRRZ T2,0(N) ;GET ADR OF MESSAGE
HRLI T2,"[" ;GET PREFIX
PUSHJ P,.ERMSG## ;TYPE THE MESSAGE
MOVSS N ;GET ADR OF ROUTINE IN RH
PUSHJ P,(N) ;CALL IT
PUSHJ P,.POP4T## ;RESTORE SOME ACS
POP P,N ;RESTORE N
PJRST .POPJ1## ;AND SKIP BACK OVER ARGS
FINFO2: MOVEI T1,"]" ;A CLOSE
PUSHJ P,.TCHAR## ;TYPE IT
PJRST .TCRLF## ;TYPE A CRLF AND RETURN
SUBTTL Storage Description
XLIST ;LITERALS
LIT
LIST
SWSEG ;SWITCH TO LOW SEG
LOWFWA:! ;START OF LOW DATA AREA
SAVCOR: BLOCK 1 ;INITIAL VALUE OF LOW SEG CORE SIZE
MADFIL: BLOCK 1 ;WE DUMMIED UP A FILESPEC FLAG
STRTOF: BLOCK 1 ;STARTING ADDRESS OFFSET
ZCOR:! ;START OF AREA TO ZERO ON INITIAL LOAD
PDLST: BLOCK LN$PDL+1 ;PUSH-DOWN LIST
OPNBLK: BLOCK 3 ;OPEN BLOCK
LKBLK: BLOCK 1 ;EXTENDED LOOKUP BLOCK
RIBPPN: BLOCK 1 ;DIRECTORY
RIBNAM: BLOCK 1 ;FILE NAME
RIBEXT: BLOCK 1 ;FILE EXTENSION
RIBPRV: BLOCK 1 ;PROTECTION WORD
RIBSIZ: BLOCK 1 ;FILE SIZE
BLOCK 1 ;JUNK
RIBSPL: BLOCK 1 ;SPOOLING NAME
BLOCK 6 ;JUNK
RIBDEV: BLOCK 1 ;LOCATION OF FILE (LOGICAL UNIT)
LKBLKL==.-LKBLK
P.ZER:! ;START OF AREA FOR FILE DEFAULTS
P.MOD: BLOCK 1 ;LAST STICKY FILE SWITCHES TYPED BY USER
P.MODM: BLOCK 1 ;LAST STICKY FILE SWITCHES MASK TYPED BY USER
P.EZER==.-1
P.MIN:!
P.STRT: BLOCK 1 ;LAST STICKY FILE STARTING POINT
P.RPT: BLOCK 2 ;LAST STICKY REPORT NAME
P.FONT: BLOCK FNMLTH ;LAST STICKY FONT NAME (30 CHARS MAX)
P.EMIN==.-1
F.ZER:! ;START OF AREA FOR FILE TYPE-INS
F.MOD: BLOCK 1 ;FILE SWITCHES
F.MODM: BLOCK 1 ;FILE SWITCH MASK (ON IF TYPED)
F.EZER==.-1
F.MIN:!
F.STRT: BLOCK 1 ;FILE STARTING POINT
F.RPT: BLOCK 2 ;/REPORT KEY
F.FONT: BLOCK FNMLTH ;FONT NAME (30 CHARS MAX)
F.EMIN==.-1
;GETTAB INFO
;
G$NAM1: BLOCK 1 ;FIRST HALF OF USER'S NAME
G$NAM2: BLOCK 1 ;SECOND HALF OF USER'S NAME
G$CMAX: BLOCK 1 ;SYSTEM CORMAX
G$MNMX: BLOCK 1 ;MINMAX
S.ZER:!
COMDEV:BLOCK 1 ;COMMAND-DEVICE FOR CURRENT REQUEST
QTYPE: BLOCK 1 ;QUEUE TYPE FOR CURRENT REQUEST
OSCNML: BLOCK 2 ;COMMANDS FOR .OSCAN
DEFFIL: BLOCK .FXLEN ;/PATH:[DIRECTORY]
DEFDIR=DEFFIL+.FXDIR
O.ZER:! ;START OF OUTPUT SPEC STORAGE
O.DEV: BLOCK 1 ;DEVICE
O.NAM: BLOCK 1 ;NAME
O.NAMM: BLOCK 1 ;NAME MASK
O.EXT: BLOCK 1 ;EXT,,MASK
O.MOD: BLOCK 1 ;SCAN SWITCHES
O.MODM: BLOCK 1 ;SCAN SWITCH MASK
O.DIR: BLOCK 1 ;DIRECTORY
O.DIRM: BLOCK 2*.FXLND-1 ;DIRECTORY MASK
O.LZER==.-O.ZER
L.OPEN: BLOCK 3 ;LISTING FILE OPEN BLOCK
L.LOOK: BLOCK LN$ENT ;LISTING FILE LOOKUP BLOCK
L.PATH: BLOCK .PTMAX ;LISTING FILE PATH BLOCK
L.DSKC: BLOCK LN$DSK ;LISTING FILE DSKCHR BLOCK
L.OTYO: BLOCK 1 ;LISTING FILE OLD TYPE OUT ROUTINE
L.STAT: BLOCK 1 ;LISTING FILE CHANNEL STATUS
L.PNTR: BLOCK 1 ;LISTING FILE BYTE POINTER TO LIST MESSAGE
PTHFCN: BLOCK .PTMAX ;PATH. ARGS
PTHPPN=PTHFCN+.PTPPN
PTFFCN: BLOCK .PTMAX ;FILE PATH BLOCK
PTFPPN=PTFFCN+.PTPPN
PTHBLK: BLOCK .PTMAX ;MORE PATH SPACE
I.INZR: BLOCK 1 ;INITIAL INPUT SPEC STORAGE
I.NXZR: BLOCK 1 ;POINTER TO NEXT INPUT SPEC STORAGE
I.LSZR: BLOCK 1 ;POINTER TO LAST INPUT SPEC STORAGE
S.EZER==.-1
T.ZER:! ;START OF TEMPORARY DATA AREA
NOBLKS:BLOCK 1 ;ACCUMULATED NUMBER OF BLOCKS TO BE PROCESSED
CREFLG: BLOCK 1 ;FLAG 0 IF CREATE, -1 IF NOT
DQTYPE: BLOCK 1 ;WORD TO STORE OUTPUT QUEUE TYPE
; FOR SUBMIT,PUNCH ...
COMIDX: BLOCK 1 ;INDEX INTO QCOMS RETURNED BY ISCAN
LSTQUE: BLOCK 1 ;BITS FOR QUEUE TO LIST
LSTNOD: BLOCK 1 ;NODE NAME FOR QUEUE TO LIST
LSTUNT: BLOCK 1 ;UNIT NUMBER FOR QUEUE TO LIST
LSTUTY: BLOCK 1 ;UNIT TYPE
T.EZER:!
;BUFFER POINTERS
;
B.LC: BLOCK 3 ;LISTING FILE
QSRPID: BLOCK 1 ;PID OF SYSTEM QUASAR
INFPID: BLOCK 1 ;PID OF SYSTEM INFO
RTYCNT: BLOCK 1 ;RETRY COUNTER WHEN SEND TO QUASAR FAILS
FSTMSG: BLOCK 1 ;ADDR OF FIRST LISTANSWER OR CREATE MESSAGE
NUMANS: BLOCK 1 ;NUMBER RECEIVED OR TO BE SENT
ACKCOD: BLOCK 1 ;ACKCOD FOR KEEPING IN SYNCH
FDCSTR: BLOCK 1 ;CONTROL FILE STRUCTURE
STRBLK: BLOCK 5 ;AREA FOR DETERMINING STR FROM UNIT
FOFBLK: BLOCK .FOFMX ;SPACE TO READ FILE SPEC
SHTMSG: BLOCK PAGSIZ ;USED TO SEND/RECEIVE "SHORT" MESSAGES
EZCOR==.-1 ;END OF AREA TO ZERO
PHASE .FXLEN ;SCAN'S AREA
I.MOD:! BLOCK 1 ;SWITCHES
I.MODM:!BLOCK 1 ;SWITCH MASK (ON IF USER SUPPLIED)
I.STRT:!BLOCK 1 ;FILE STARTING POINT
I.RPT:! BLOCK 2 ;/REPORT SWITCH
I.FONT:!BLOCK FNMLTH ;FONT NAME (30 CHARS MAX)
I.LZER::!
DEPHASE
END QUEUE