Trailing-Edge
-
PDP-10 Archives
-
bb-j710b-bm_tops20_v41_tools
-
tools/sysdpy/sysdpy.mem
There are 12 other files named sysdpy.mem in the archive. Click here to see a list.
The SYSDPY Program
DESCRIPTION
SYSDPY shows the status of the system. The status is
continually updated on video terminals. You can select a variety
of displays for items such as jobs, forks, JFN's, queues, and
system statistics. You can type commands while the program is
running to change the display parameters.
NOTE
SYSDPY is an unsupported
product. However, you may
submit SPRs pertaining to
the program. All SPRs received
will be examined, but not all
will be answered.
MONITOR MODIFICATIONS BY SYSDPY
In order to collect much of the information which is shown,
SYSDPY modifies the monitor to implement a new JSYS. SYSDPY does
this using the SNOOP JSYS when the first privileged user runs the
program. (Later runs of SYSDPY do not need to SNOOP again.) The
SNOOP code allocates about 554 octal words of swappable free core
and inserts JSYS 717, called MONRD%, into the running monitor.
MONRD% is active as long as the monitor is running. The
functions of MONRD% are discussed in the file SYSDPY.MAC, near the
label .MONRD.
WARNINGS
.The reliability of MONRD% requires that the correct version
of SYSDPY be used for a particular monitor. If the versions
of SYSDPY and the monitor do not match, (such as running
Release 4 SYSDPY under a Release 3A monitor) either the
system may crash or you may obtain incorrect results.
.Since ENQ/DEQ storage and IPCF data also use swappable free
core, running SYSDPY may cause applications to fail when
they would not normally. This occurs if the free space is
almost full during normal use. In this situation, either
you cannot run SYSDPY or you must increase the amount of
swappable free core in the monitor.
.MONRD% is only guaranteed to work as it is written.
If you modify it, you take chances with the stability of
the monitor.
.The conditional FTPRIV is usually on in SYSDPY.MAC. This
means that unprivileged users cannot use MONRD%. SYSDPY
still runs, but it only gives the information returned by
the normal JSYS's. If FTPRIV is off, any user can obtain
much of the information once a privileged user inserts
MONRD%. (Do this only if you are not concerned about
security. MONRD% can return the data that users are
reading or writing.)
SYSDPY COMMANDS
SYSDPY commands are generally in single or double letter
format. You terminate all commands when you press the RETURN key.
The editing characters ^U and DELETE perform their usual functions.
SYSDPY does not prompt for commands, and they do not echo as you
type them. Instead, SYSDPY continues to update the page until
you finish the command line, then it processes the command.
You can type more than one command on a line. In doing this, it
may be necessary to insert a space or a comma between the commands
to remove ambiguities. For example, the "S" command means scroll
the page. The "T" command means show titles. However, the "ST"
command means show the structure status. The "S T" command
scrolls the page and shows titles.
If you run SYSDPY by typing its name to the EXEC, you can
type commands after the name. For example, to show the status
of the structures, type the following line to the EXEC:
@SYSDPY ST <RET>
SYSDPY can also read commands from your SYSDPY.INI file,
which contains a list of commands or options. SYSDPY.INI is always
read from your logged in directory on PS:. The following is an
example of a SYSDPY.INI file:
:SYSDPY NT O W5
:A GSYSDPY CCONNECT-TIME/6 BJOBS/2
The file contains two sets of commands, SYSDPY and A. The
colon before each command identifies it as a label. Commands can
be several lines long, in which case SYSDPY treats carriage returns
as spaces. To process one of the options, type the name of the
option as the argument to the "G" command. Thus, in the previous
example, the command "GA" processes the commands in the SYSDPY
option, adds a new column to the display, and changes the number of
blanks in the display. Options can call each other only to a depth
of 5.
When the program starts, it processes the SYSDPY option in
your SYSDPY.INI file. The SYSDPY option is also processed if
you use a null name as an argument to the "G" command. Thus, you
can set your own special defaults for SYSDPY by putting them in
the SYSDPY option. If the SYSDPY option exists in your SYSDPY.INI
file and you then type commands when you start the program, SYSDPY
processes the commands in the file first.
Whenever SYSDPY encounters an error in command handling, it
notifies you with a bell and does not process further commands from
that command level.
THE HELP COMMAND
There is a help command in SYSDPY, the "H" command, which
you can use at any time without losing your current display. This
command reads the file HLP:SYSDPY.HLP and displays it on your
terminal. The file lists all SYSDPY command formats. You can also
type the "HC" command. This shows all possible columns in the
various displays. (These names are used by the "B" and "C"
commands.) To return to your previous display, type "NH".
CHANGING COLUMNS OF A DISPLAY
Some displays have many possible columns of data. Your
terminal screen may not be wide enough to show all possible columns
for a particular display. Therefore, commands exist to change the
columns of a display. You can use the "C" command to change
columns around. To insert a column at the end of a display (to the
right of the current columns), type the "C" command followed by the
name of the column, which you can abbreviate. To insert a column
at any desired location, type the name of the column followed by
a slash and the column number. SYSDPY inserts that column at that
column number, moving the remaining columns to the right. You can
use the "NC" command to remove a column from a display. For
example, the command "CPRIVILEGES/3" shows the fork's privileges
in the third column of the fork display. The command "NCSTATE"
removes the STATE column from the job display.
Some columns can be very wide. For example, user names can
be 39 characters long. To fit several wide columns on the screen
at the same time, SYSDPY restricts the width of all columns except
the last one. Consequently, data in a wide column is sometimes
cut off. In this case, move the column to the end of the display
to view all of the data.
TYPES OF DATA IN DISPLAYS
This section describes the columns of data that appear in
various displays. The obvious columns are not discussed.
Job Display:
Job - This is the job number. SYSDPY always flags your own
job with an asterisk.
Terminal - This is the terminal controlling the job. If
the terminal is the CTY, the number is flagged with
an asterisk. If the terminal is a PTY, you also see
the letter "J" followed by the controlling job number.
CPU Percentage - This is the total percentage of CPU time
the job used in the last minute. SYSDPY computes
the data about every 20 seconds. The column is blank
for the first minute because it takes SYSDPY that
amount of time to compute the first percentage.
Idle Time - This is the number of minutes that the job run-
time remained stable. If a plus sign follows the
number, this specifies a lower bound; SYSDPY was not
running long enough to know the actual idle time.
File Display:
OFN - This is the system-wide handle on an open disk file.
Dashes appear if it is not a disk file. If the file
is long, you see two numbers separated by a slash.
The first number is the OFN of the last referenced
512 page section of the file. The second number is
the OFN of the super index block.
Fork - This is the system fork number that did the original
GTJFN for this JFN.
File Status - This indicates the mode of the file when it
was opened and the current status of the file. The
variables in this column are the following:
Nopen File is not open yet.
Parse The JFN is parse-only.
Rd The file is open for read access.
Wrt The file is open for write access.
App The file is open for append access.
Xct The file is open for execute access.
Res The JFN is restricted. No other forks can
use it.
Eof The file is at end-of-file.
Err An error occurred reading or writing the
file.
Inv The JFN is not currently valid because a
GTJFN or a GNJFN is looking for the next
file to return.
Fork Display:
Fork - This is the system-wide fork number for this fork.
Superior - This is the system-wide fork number that is the
immediate superior to this fork.
Monitor PC - This is the EXEC mode PC of the fork if it is
executing in the monitor, such as in a JSYS. You
see dashes in this column if the fork is in user mode.
Mapped Pages - This is a list of what the various pages
belong to in the fork's core image (section 0 only).
SYSDPY orders the list by size, so the first value is
the most common, the second is next most common, etc.
The values are:
P - Private pages owned by the fork itself.
Fn - Indirect mapping to pages in system fork n.
n - Shared or indirect mapping to the file whose
OFN is n.
Scheduler Test - This is only meaningful if the fork is in
some kind of wait. The right half is the address of
the monitor routine. It determines if the fork will
be unblocked. The left half is data for the routine
to check. There are many different scheduler tests.
Some of the most common ones are:
BLOCKM, BLOCKW A sleep for about one minute.
BLOCKT A longer sleep.
FORCTM The fork halted due to an error.
FRZWT The fork is frozen.
HALTT The fork halted itself.
JRET Wait until interrupted.
TCITST Wait for terminal input.
TCOTST Wait for available space in the
output buffer.
TTIBET Wait for an empty input buffer.
TTOBET Wait for an empty output buffer.
TRMTST Wait for a particular fork to
terminate.
TRMTS1 Wait for any inferior fork to
terminate.
PIDWAT Wait for an IPCF packet to arrive.
ENQTST Wait for an available ENQ lock.
MTAWAT Wait for IO to finish for a unit.
Privileges - These are enabled and possible privileges of
the fork. Privileges following a slash are possible
privileges which are not enabled by the fork. The
various privileges are:
W Wheel
O Operator
M Maintainance
+ Any privilege other than the above
Last Call - This is the last instruction that called the
monitor. It is usually a JSYS, but it could also
be a UUO for PA1050 or an illegal instruction.
When an asterisk preceeds the instruction, the PC is
in EXEC mode and the JSYS is being processed. If an
asterisk does not preceed the instruction, the fork
is running in user mode and the JSYS was the last
one done. Only JSYS's done from user mode will
appear. (Nested JSYS's do not appear.)
Fork Flags - These give some status of the fork. They can
be any of the following:
E The fork is execute-only.
V The fork is virgin (newly-created by CFORK).
G The fork is doing an execute-only GET.
Page Traps - This is the total number of page traps that
the fork caused since its creation.
Page Trap PC - This is the PC of the last page trap. This
can be either a user mode or EXEC mode PC. An
asterisk flags EXEC mode.
Runtime - This is the runtime of the fork to the nearest
tenth of a second.
Working Set Size - This consists of two numbers separated
by a slash. The first number is the real working
set size determined by the monitor. This is the
number of pages the monitor allows you to use with-
out page faulting. Some of the pages may belong to
the swappable monitor. The second number is the
number of pages existing in the fork's core image.
(Pages mapped indirectly to other forks are not
included.) The ratio of these two numbers is an
approximation of how much of the program is in core
at one time.
Interrupt Defer Count - This is the word which indicates
whether or not a process can be stopped or inter-
rupted. The value is the number of reasons why this
fork cannot be interrupted, minus 1. A negative
value allows a fork to be stopped. Non-negative
values do not allow stopping.
IPCF Display:
Flags - These are status flags for this PID. The flags
can be any of the following:
Job The PID is job-wide; it stays even when
the fork that created it disappears.
Res The PID is restricted; no other fork
in the job can reference it.
Quotas - These are the send and receive quotas for the
PID. They are always separated by a slash.
Packets - This is the number of IPCF packets waiting to be
read for this PID.
Name - This is the name of the PID that was obtained
from <SYSTEM>INFO.
Structure Display:
Structure - This is the name of the mounted structure. It
is usually the same name as the alias.
Alias - This is the real name of the structure specified
in the HOME blocks.
Units - These are two numbers separated by a slash. The
first number specifies the pack's logical unit
number in a structure. The second number specifies
how many packs are in the structure.
Swapping - This is the number of swapping pages the disk
has.
Status - This is information on the status of the unit.
It is a combination of the following:
Mount The structure is mounted.
Diag The structure is being used by diagnostics.
Offline The drive is not accessible by the monitor.
Free The drive is on-line; a pack is in the
drive but it is not mounted.
Err Errors occurred while reading the pack.
BadBAT The BAT blocks on the pack are incorrect.
BadHOM The HOME blocks on the pack are incorrect.
Wrtlck The structure is write-locked.
Errors (Read, Write, and Seek) - These specify the number
of various hard and soft errors the unit has had.
Soft errors are in the left column and preceeding
the letter "S". Hard errors are in the right column
preceeding the letter "H". Dashes indicate that
there are no errors.
ENQ Display:
Lock Number - This is used to match the locks with the
queues. The queues belong to the lock with the
matching number.
Type - This is the type of lock. It is one of the
following:
ENQ Jobs Lock is obtained by any job with ENQ
privileges.
WHEEL Jobs Lock is obtained by any job with WHEEL
privileges.
OFN n Lock is obtained by a job using the
specified file.
Job n Lock is obtained by any fork in the job.
Resources - These are two numbers separated by a slash.
The first number specifies how many resources are
available for the lock. The second number specifies
the total number of resources in the pool. This
second value also specifies the group number associ-
ated with this lock.
Lock Time - This is the time of day when this lock was
last given to a fork.
Lock Code - This is either the ASCIZ string for this lock
or an octal number following a hash mark.
ENQ Flags - This is the status of this queue block. It is
one of the following:
Owner The lock is owned by this queue block.
Blocked The fork is waiting for the lock.
Terminal Display:
Input Count - This is the number of characters in the
input buffer.
Output Count - This is the number of characters in the
output buffer.
Job - This is the job that owns the terminal. It is one
of the following:
n Job n has the terminal assigned or opened.
-- The terminal is not in use.
Ass A new job number is being created on the
terminal.
Flags - This is the status of the terminal. It is one of
the following:
Prm The terminal data block is always alloca-
ted.
Sht The terminal block is short.
Msg The terminal block sends system messages.
Sndal A send-all is in progress.
Pag The terminal is paged.
Out Characters are being sent to the terminal.
In A fork is in an input wait.
Rmt The line is remote.
Car Carrier is on.
Auto The line is auto-baud.
Cty The line is the CTY.
Pty The line is a PTY.
DECNET Display:
Fork - This is the fork which owns this logical link.
Dashes appear if the link is no longer associated
with a fork.
Byte Count - This specifies how many bytes of data exist
in the current segment being filled.
Counts (Input and Output) - These are the segment numbers
for the link. They are not related to any particu-
lar amount of data; they increase as data transfers
are done and wrap around after 7777 is reached.
Type - This specifies the type of link. The byte size of
the link appears in parentheses. The link type is
one of the following:
DCN This is the active half of a link making
connections.
SRV This is the passive half of a line waiting
for a connection.
INT This is an internal monitor link.
Flow Status - This gives the restraints on the flow of
data across the link. It can be one of the
following:
None No flow control exists for the link.
Seg: n A maximum of n more segments can be
transmitted.
Msg: n A maximum of n more messages can be
transmitted.
In addition, the information above can be preceeded
by the following status bits:
T Transmission back-pressure exists.
R Receive back-pressure exists.