Trailing-Edge
-
PDP-10 Archives
-
bb-h138f-bm
-
7-sources/rmsima.b36
There are 3 other files named rmsima.b36 in the archive. Click here to see a list.
%TITLE 'I M A G E -- IMAGE record routines'
!<BLF/REQUIRE 'RMSBLF.REQ'>
MODULE Image (IDENT = '3.0'
) =
BEGIN
!
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1984, 1986.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: RMS
!
! ABSTRACT:
!
! IMAGE contains all routines dealing with
! I/O to Local IMAGE (RFM=UDF) files
!
! ENVIRONMENT: User Mode, Interrupts deferred until return
!
! AUTHOR: Andrew Nourse , CREATION DATE: 19-Jun-84
! Cloned out of RMSASC, by Ron Lusk
!--
!
! TABLE OF CONTENTS
!
!
! PUTIMAGE -- Process $PUT macro for IMAGE file
! GETIMAGE -- Process $PUT macro for IMAGE file
!
! INCLUDE FILES:
!
REQUIRE 'rmsreq';
!
! EQUATED SYMBOLS:
!
GLOBAL BIND
imagev = 3^24 + 0^18 + 575; ! Edit number
EXTERNAL ROUTINE
FindIma;
%SBTTL 'PUTIMAGE -- $PUT for IMAGE'
GLOBAL ROUTINE putimage : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
! This routine processes the $PUT macro for IMAGE files.
!
! FORMAL PARAMETERS
!
! NONE.
!
! IMPLICIT INPUTS
!
! RAB: Address of User RAB
! RST: Address of User RST
!
! ROUTINE VALUE:
!
! NONE.
!
!--
BEGIN
LOCAL
filepointer, ! Byte pointer to file buffer
userpointer: $byte_pointer, ! .. to user buffer !m502
bytesperpage, ! # of bytes in page !a504
destsize, ! Size of destination buffer
recordsize, ! Size of current record
bytestomove, ! Count of bytes to be
! moved to user buffer
bytesleft, ! Free bytes in file buffer
bytesize; ! Byte size to use
TRACE ('PUTIMAGE');
bytesize = .Fst[Fst$h_Bsz]; !m575
bytesperpage = ( %BPVAL / .bytesize ) * pagesize; !m575
!
! If RFA access is being used, find our place
!
IF rfaadr ! If RFA access !a573v
THEN ! Fetch File Page Into User Window
BEGIN
! If last oper was Seq $Put, flush buffer
IF .Rst[Rst$v_Last_Sequential]
AND (.Rst[Rst$v_Last_Operation] EQL C$Put)
THEN FluBuf();
PosAscFil( .Fst[Fst$h_Jfn],
Rst[Rst$g_Data_Rfa] = .Rab[Rab$g_Rfa] );
END
ELSE !a573^
Rab[Rab$g_Rfa]
= Rst[Rst$g_Data_Rfa]
= .Rst[Rst$g_Data_Rfa] + .Rst[Rst$h_Record_Size];
!+
! Set up file and user buffer pointers
!-
userpointer = .Rab[Rab$a_Rbf]; ! User's Ptr to buffer !m504
TGUPointer( userpointer, .bytesize ); ! Make 2-word global if needed !m504
recordsize = .rab [Rab$h_Rsz]; ! Get # bytes to write
!+
! This is the main loop. It continues until the
! entire user record has been written to the file.
!-
WHILE .recordsize GTR 0 DO
BEGIN
!+
! Is our buffer full?
!-
IF .rst [rstbytecount] EQL .bytesperpage !m504
THEN
BEGIN
writebuffer (); ! Output full buffer
END;
filepointer = .rst [rstpagptr]; ! Fetch file pointer
bytesleft = .bytesperpage - .rst [rstbytecount];
!+
! Use the record size or the buffer space left, whichever
! is smaller.
!-
destsize = bytestomove = MIN( .recordsize, .bytesleft );
!+
! Debugging
!-
lookat (' FILEPTR: ', filepointer);
lookat (' # BYTES: ', bytestomove);
lookat (' BYTES: ', bytesleft);
!+
! Do a Move-String With Left Justification to file
!-
BEGIN
LOCAL
usrbp: $byte_pointer, ! Temporary user ptr !m502
filbp: $byte_pointer, ! Temporary file ptr
src_len, ! Temporary source length
dst_len; ! Temporary dest. length
!
! Set up for MOVSLJ instruction
!
! byte pointer to user buffer
usrbp[ptr$a_pointer] = .userpointer[ptr$a_pointer];
usrbp[ptr$a_global_address] = .userpointer[ptr$a_global_address];
filbp = .filepointer; ! Local BP to page
src_len = .bytestomove;
dst_len = .destsize;
IF moveleft_ea ( ! Move the record
usrbp, ! Source
filbp, ! Destination
src_len, ! Size of source
dst_len) EQL false ! Size of destination
THEN
rmsbug (msgmovestring); ! Move-String failed
!
! Update our file and buffer pointers
!
filepointer = .filbp; ! Update pointers
userpointer[ptr$a_pointer] = .usrbp[ptr$a_pointer];
userpointer[ptr$a_global_address] = .usrbp[ptr$a_global_address];
recordsize = .recordsize - .bytestomove;
rst [rstpagptr] = .filepointer; ! Update pointer
END; ! End MOVSLJ block
!
! Update # of bytes left in buffer
!
rst [rstbytecount] = .rst [rstbytecount] + .bytestomove;
END; ! Of WHILE loop
!+
! We have now moved the entire record from the user's buffer
! into the internal RMS-20 file buffer. We must also reset
! RSTHYBYTE to reflect the highest byte in the file.
!-
rst [rst$g_highest_byte] = MAX( .rst [rst$g_highest_byte],
.rab[rab$g_rfa] + .rab [Rab$h_Rsz] ) ;
Rst[Rst$h_Record_Size] = .Rab[Rab$h_Rsz];
IF rfaadr THEN WriteBuffer(); ! Write buffer out now. !a575
RETURN
END; ! End of PUTIMAGE
%SBTTL 'GETIMAGE -- $GET for IMAGE files'
GLOBAL ROUTINE getimage (moveflag) =
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine processes the $GET macro for IMAGE files (UDF record
! format). It transfers one record into the user's buffer, where a
! record is defined as (MRS) bytes of (BSZ) size.
!
! FORMAL PARAMETERS
!
! MOVEFLAG -- Flag for record transfer:
! True: move the record ($GET)
! False: skip the record (last $GET was partial)
!
! IMPLICIT INPUTS
!
! ?
!
! ROUTINE VALUE:
!
! Number of bytes in record, or number moved if PARTIALFLAG has been set.
!
! SIDE EFFECTS:
!
! This routine sets RSTRHSIZE, which is the record header size.
! For IMAGE files the size is zero (no record header). This field
! is used by the $TRUNCATE processor to know how much to subtract
! from RSTDATARFA to find the beginning of the current physical
! record.
!
!--
BEGIN
LOCAL
tty_eof, ! EOF on TTY: (^Z seen) !A441
userpointer: $byte_pointer, ! 2-word Pointer to user buffer
bytestomove, ! bytes to move this MOVSLJ
exitflag, ! Flag for leaving the loop
recordsize, ! Current length of record
bytesleft, ! # bytes left in buffer
nextword, ! Next file word for LSA files
movestatus, ! Temporary variable
buffersize, ! Size of user's buffer
bytesize; ! Byte size to use !a504
TRACE ('GETIMAGE');
bytesize = .Fab[Fab$v_Bsz]; !a504
!+
! If unit record device, reset buffer
! Otherwise, check for end of file
!-
IF tty OR llpt ![3] Make LPT work
THEN
BEGIN ! To reset buffer
rst [rstbytecount] = 0; ! Clear buffer
rst [rstpagptr] = CH$PTR (.curentbufferadr, ! Clear buffer
, ! with new pointer
.bytesize ); ! File byte size
END
ELSE
BEGIN
IF endoffile THEN usererror (er$eof);
END;
!+
! Set up user buffer pointer, etc.
!-
userpointer = .Rab[Rab$a_Rbf]; !m504
TGUPointer( userpointer, .bytesize ); !m504
buffersize = ! Remember size of his buffer
.rab [Rab$h_Usz] * ( %BPVAL / .Fab[Fab$v_Bsz] ); ! in bytes
recordsize = 0; ! Clear total size
rab [Rab$h_Rsz] = 0; ! Clear his record size
tty_eof = 0; ! Clear TTY: EOF flag !A441
exitflag = false; ! Loop forever
!+
! If we are skipping a record, then don't use a user pointer
!-
IF .moveflag EQL false THEN userpointer = 0; ! No data will be moved
rst [rstrhsize] = 0; ! Set record header size to 0
!+
! This is the main loop. it continues until
! user's buffer is filled, or MRS is reached.
!-
UNTIL .exitflag DO
BEGIN
!+
! We will now move the entire record
! until we come to either the end
! of the file, or have read (MRS) bytes,
! or filled the user's buffer.
!-
!+
! If buffer is empty, then re-fill it.
!-
IF .rst [rstbytecount] EQL 0 THEN readbuffer ();
IF endoffile THEN usererror(er$eof)
ELSE !d575
BEGIN ! Set up MOVSLJ
LOCAL
usrbp: $byte_pointer,
filbp: $byte_pointer,
src_len,
dst_len;
bytestomove = MIN( .Fab[Fab$h_Mrs],
.Rst[Rst$h_byte_count],
.buffersize ); !m575
src_len = dst_len = .bytestomove;
usrbp[ptr$a_pointer] = .userpointer[ptr$a_pointer];
usrbp[ptr$a_global_address]
= .userpointer[ptr$a_global_address];
filbp = .Rst[Rst$g_Page_Pointer];
IF MoveLeft_ea(
filbp,
usrbp,
src_len,
dst_len
) EQL false
THEN
RmsBug( msgmovestring ); ! Oops, it failed
userpointer[ptr$a_pointer] = .usrbp[ptr$a_pointer];
userpointer[ptr$a_global_address] = .usrbp[ptr$a_global_address];
Rst[Rst$g_Page_Pointer] = .filbp;
recordsize = .recordsize + .bytestomove;
buffersize = .buffersize - .bytestomove; !a561
Rst[Rst$h_byte_count]
= .Rst[Rst$h_byte_count] - .bytestomove; !a572
END; ! End of MOVSLJ code
IF .recordsize EQL .Fab[Fab$h_Mrs] !m561
THEN exitflag = true; ! Exit from loop
!++
!
! At this point, we have done the following:
!
! 1) moved a full record, or
! 2) filled the user's buffer, or
! 3) exhausted the current file buffer.
! 4) Reached EOF, partial record in user's buffer
!
!--
!+
! Set up the record size field and check for
! a record which is too big for the user's buffer.
!-
IF .moveflag
THEN
BEGIN
rab [Rab$h_Rsz] = .recordsize; ! Update user's record size
!+
! If we are still trying to process the
! record, but the buffer is full then
! we have filled the user's buffer.
!-
IF (.exitflag EQL false) AND (.buffersize LEQ 0)
THEN
BEGIN
usrsts = er$rtb; ! Set partial record
usrstv = .recordsize; ! Return partial record size
setflag (rst [rstflags], flgpartial); ! Remember this
exitflag = true ! Leave
END
END;
END;
!+
! Store the size of this record in the user's RAB
!-
rst [rstrsz] = .recordsize; ! Pass the record size back
!
! Set the RST flag bit which tells FINDIMA that
! the file pointer (PAGPTR) must be updated before
! the next operation can be done.
!
setflag (rst [rstflags], flgupdptr);
! !A441
! Check that we didn't receive EOF from TTY: !A441
! !A441
IF .tty_eof THEN usererror (er$eof); !A441
!
! We have now done everything and we can exit.
!
RETURN .recordsize
END; ! End of GETIMAGE
END ELUDOM ! END OF MODULE