Trailing-Edge
-
PDP-10 Archives
-
bb-h138e-bm_tops20_v6_1_distr
-
6-1-sources/chmparse.bli
There are 11 other files named chmparse.bli in the archive. Click here to see a list.
%TITLE 'CHMPARSE - change mode parse and execute'
MODULE CHMPARSE ( ! Change mode parse and execute
IDENT = '3-003' ! File: CHMPARSE.BLI Edit: GB3003
) =
BEGIN
!
! COPYRIGHT (c) 1981, 1985 BY
! DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! This module parses and executes a change mode command string.
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: Unknown
!
! MODIFIED BY:
!
! 1-001 - Original. DJS 04-Feb-1981. This module was created by
! extracting the routine EDT$$CHM_PAREXE from module CHANGE.BLI.
! 1-002 - Regularize headers. JBS 03-Mar-1981
! 1-003 - Use new message codes. JBS 04-Aug-1981
! 1-004 - Add the bell verb. STS 11-Aug-1981
! 1-005 - Add the date verb. STS 31-Aug-1981
! 1-006 - Add the setting of default verb. STS 21-Sep-1981
! 1-007 - Add desel and tgsel. STS 23-Sep-1981
! 1-008 - Add ssel verb. STS 24-Sep-1981
! 1-009 - Add a return value for journal file ended. JBS 02-Oct-1981
! 1-010 - Revise direction setting for tadj. SMB 22-Oct-1981
! 1-011 - Give an error message on an invalid repeat count. JBS 10-Mar-1982
! 1-012 - Add NOOVERLAY symbol. JBS 04-Apr-1982
! 1-013 - Set a flag if control C actually aborts something. JBS 24-May-1982
! 1-014 - Change alphabetic test. JBS 19-Jul-1982
! 1-015 - Add the xlate verb. STS 13-Aug-1982
! 1-016 - Add the CLSS verb. STS 26-Aug-1982
! 1-017 - Change to using an alphabetically ordered table. STS 21-Sep-1982
! 1-018 - Move the table into the keyword routine, to reduce the program size
! on the PDP-11. JBS 29-Sep-1982
! 1-019 - Allow lower case commands. JBS 01-Oct-1982
! 1-020 - Check the length of the command. STS 08-Oct-1982
! 1-021 - Add conditional for VT220 support. JBS 11-Feb-1983
! 1-022 - Add conditional for WPS support. JBS 13-Feb-1983
! 1-023 - Correct a typo. JBS 22-Feb-1983
! 3-001 - Don't need overlay code. CJG 17-Apr-1983
! 3-002 - Add updates from V3 sources. GB 27-Apr-1983
! 3-003 - Remove VT220 conditional to speed up code. CJG 25-Nov-1983
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$CHM_PAREXE; ! Parse and execute a change mode command string
!
! INCLUDE FILES:
!
REQUIRE 'EDTSRC:EDTREQ';
LIBRARY 'EDTSRC:TRANSLATE';
!
! MACROS:
!
! NONE
!
! EQUATED SYMBOLS:
!
! NONE
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
! In the routine
%SBTTL 'EDT$$CHM_PAREXE - change mode parse and execute'
GLOBAL ROUTINE EDT$$CHM_PAREXE ( ! Change mode parse and execute
EXECUTE ! 1 = execute
) =
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine parses and executes a change mode command string.
!
! FORMAL PARAMETERS:
!
! EXECUTE - 1 if we should execute the command, 0 to parse only.
!
! IMPLICIT INPUTS:
!
! DIR_MOD
! CMD_END
! EXI
! CMD_PTR
!
! IMPLICIT OUTPUTS:
!
! DIRN
! ALT_BUF
! TADJ
! CC_DONE
!
! RETURNED VALUE:
!
! 0 - Command failed or control C
! 1 - Command succeeded
! 2 - Journal file ended
!
! SIDE EFFECTS:
!
! Many
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$$EXE_CHMCMD2, ! Execute the verbs which take an entity specification
EDT$$EXE_CHMCMD1, ! Execute the verbs which do not take an entity specification
EDT$$MSG_BELL : NOVALUE, ! Output a message to the terminal with a warning bell
EDT$$CHK_CC, ! Check to see if a CTRL/C has been typed
EDT$$GET_BUF : NOVALUE, ! Look for a buffer spec for the cut, paste, and append commands
EDT$$CHK_CNT, ! Look for a repeat/entity count
EDT$$CHK_DIR, ! Determine the current direction
EDT$$SCAN_SEASTR : NOVALUE, ! Scan over the search string when used as an entity
EDT$$FND_SUBSTR : NOVALUE, ! Isolate the search and replace strings for the SUBSTITUTE command
EDT$$SCAN_INSSTR : NOVALUE, ! Scan over the string of characters to be inserted
EDT$$KEY_WORD, ! Compare the command buffer contents to a table of keywords
EDT$$PARENT, ! Collect and execute a parenthesized string of commands
EDT$$CNV_UPC; ! Convert string to upper case
EXTERNAL
SEA_LEN, ! length of string
DIRN, ! The current direction.
DIR_MOD, ! The directional mode.
CMD_END, ! End of command pointer
EXI, ! Change mode has been exited.
CMD_PTR, ! Command string pointer
ALT_BUF : REF TBCB_BLOCK, ! Alternate buffer used for cut/paste.
TADJ, ! Count for tabs adjust.
DFLT_VERB, ! Default verb
CHAR_INFO : BLOCKVECTOR [256, 1], ! Information about characters
CC_DONE; ! Set to 1 if control C actually aborted something
MESSAGES ((INVENT, INVSUBCOM, NUMVALILL));
LOCAL
C,
REPT_COUNT,
EXPLICIT_REPEAT,
VERB,
ENTITY,
ENTITY_COUNT,
EXPLICIT_ENTITY_COUNT,
OPERAND,
DIR_SAME,
TADJ_DIR,
SUCCEED;
!+
! Loop until we hit the end of the command buffer or a closing parenthesis.
!-
WHILE CH$PTR_GTR (.CMD_END, .CMD_PTR) DO
BEGIN
IF EDT$$CHK_CC ()
THEN
BEGIN
CC_DONE = 1;
RETURN (0);
END;
!+
! Skip blanks at beginning of command.
!-
WHILE (CH$RCHAR (.CMD_PTR) EQL %C' ') DO
CMD_PTR = CH$PLUS (.CMD_PTR, 1);
!+
! Look for closing paren.
!-
IF (CH$RCHAR (.CMD_PTR) EQL %C')') THEN EXITLOOP;
!+
! Set default direction, zero the alternate buffer and zero the
! direction change indicator.
!-
DIRN = .DIR_MOD;
ALT_BUF = 0;
!+
! Check for explicit direction specified.
!-
DIR_SAME = EDT$$CHK_DIR ();
!+
! Look for a count, and remember whether one was seen.
! Give an error message and bail out if the count is invalid.
! (An invalid count means a count greater than 32767.)
!-
REPT_COUNT = 0;
EXPLICIT_REPEAT = EDT$$CHK_CNT (REPT_COUNT);
IF (.EXPLICIT_REPEAT EQL 2)
THEN
BEGIN
EDT$$MSG_BELL (EDT$_NUMVALILL);
RETURN (0);
END;
!+
! Look for the loop.
!-
IF (CH$RCHAR (.CMD_PTR) EQL %C'(')
THEN
BEGIN
IF ((.REPT_COUNT EQL 0) AND (.EXPLICIT_REPEAT EQL 0)) THEN REPT_COUNT = 1;
SUCCEED = EDT$$PARENT (.REPT_COUNT, .EXECUTE);
IF (.SUCCEED NEQ 1) THEN RETURN (.SUCCEED);
END
ELSE
BEGIN
!+
! And now, find the verb of the command.
!-
EDT$$KEY_WORD (1, VERB);
IF (.VERB EQL 0) THEN VERB = .DFLT_VERB;
!+
! If the command is tabs adjust, then the [+|-] preceding the repeat count is
! used to determine adjustment of the entities right or left. The global
! direction (ADV or BACK) is not affected by this tab adjust direction.
!-
IF (.VERB EQL VERB_K_TADJ)
THEN
BEGIN
TADJ_DIR = 1;
!+
! If the adjustment direction has explicitly been set by '-', then tab
! adjust to the left.
!-
IF ((.DIRN EQL DIR_BACKWARD) AND (.DIR_SAME EQL 0)) THEN TADJ_DIR = -1;
DIRN = .DIR_MOD;
END;
!+
! This hack prevents the entities SEN and SR from being assumed
! to be a SUBSTITUTE command.
!-
IF (.VERB EQL VERB_K_SUBS)
THEN
BEGIN
C = CH$RCHAR (.CMD_PTR);
IF .CHAR_INFO [.C, CI_LET]
THEN
BEGIN
VERB = .DFLT_VERB;
CMD_PTR = CH$PLUS (.CMD_PTR, -1);
END;
END;
!+
! Check to see if it is truly a verb which uses an entity specification.
!-
IF (.VERB LSS VERB_K_SEL)
THEN
BEGIN
!+
! And once again, look for the explicit direction.
!-
DIR_SAME = EDT$$CHK_DIR ();
!+
! Set the entity count to the default of 1, then see if there
! was a count specified.
!-
ENTITY_COUNT = 1;
EXPLICIT_ENTITY_COUNT = EDT$$CHK_CNT (ENTITY_COUNT);
IF (.EXPLICIT_ENTITY_COUNT EQL 2)
THEN
BEGIN
EDT$$MSG_BELL (EDT$_NUMVALILL);
RETURN (0);
END;
!+
! And try for a direction once again.
!-
DIR_SAME = EDT$$CHK_DIR ();
!+
! Now get the entity.
!-
IF CH$PTR_GTR (.CMD_END, .CMD_PTR)
THEN
BEGIN
C = CH$RCHAR (.CMD_PTR);
IF ((.C EQL %C'"') OR (.C EQL %C'''') OR (.C EQL 0))
THEN
BEGIN
ENTITY = ENT_K_QUOTE;
CMD_PTR = CH$PLUS (.CMD_PTR, 1);
END
ELSE
EDT$$KEY_WORD (2, ENTITY);
END
ELSE
ENTITY = 0;
!+
! If entity was not found, something is wrong.
!-
IF (.ENTITY EQL 0)
THEN
!+
! If verb was defaulted to move, assume it was wrong, otherwise
! it must be the entity which is wrong.
!-
BEGIN
IF (.VERB NEQ 0) THEN EDT$$MSG_BELL (EDT$_INVENT) ELSE EDT$$MSG_BELL (EDT$_INVSUBCOM);
RETURN (0);
END;
!+
! If the command is tabs adjust, then process it specially.
! The repeat count and (+ or -) directional indicator are used
! to determine the adjustment and the entity count and direction
! to select the text.
!-
IF (.VERB EQL VERB_K_TADJ)
THEN
BEGIN
IF (.EXPLICIT_REPEAT EQL 0) THEN REPT_COUNT = 1;
!+
! TADJ_DIR = 1 to adjust right
! = -1 to adjust left
!-
TADJ = .REPT_COUNT * .TADJ_DIR;
EXPLICIT_REPEAT = 0;
END;
!+
! If there was a repeat count as well as an entity count, multiply
! them out to get the actual number of entities, and only execute
! the command once.
!-
IF .EXPLICIT_REPEAT THEN ENTITY_COUNT = .REPT_COUNT*.ENTITY_COUNT;
REPT_COUNT = 1;
!+
! If entity is quoted, get the string.
!-
IF (.ENTITY EQL ENT_K_QUOTE) THEN EDT$$SCAN_SEASTR ();
!+
! Get the buffer spec if command is cut or append.
!-
IF (.VERB GEQ VERB_K_CUT) THEN EDT$$GET_BUF ();
!+
! And execute it.
!-
IF .EXECUTE
THEN
BEGIN
SUCCEED = EDT$$EXE_CHMCMD2 (.ENTITY, .ENTITY_COUNT, .VERB);
IF (.SUCCEED NEQ 1) THEN RETURN (.SUCCEED);
END;
END
ELSE
BEGIN
!+
! Handle the parsing of the 'funny' verbs, i.e. those which have
! variable length strings as a part.
!-
OPERAND = .CMD_PTR;
CASE .VERB FROM VERB_K_SUBS TO VERB_K_CC OF
SET
[VERB_K_INSERT] :
EDT$$SCAN_INSSTR ();
[VERB_K_XLATE] :
IF CH$PTR_NEQ (.CMD_PTR, .CMD_END)
THEN
EDT$$SCAN_INSSTR ()
ELSE
SEA_LEN = 0;
[VERB_K_SUBS] :
EDT$$FND_SUBSTR ();
[VERB_K_CC] :
BEGIN
EDT$$CNV_UPC (.CMD_PTR, 1);
CMD_PTR = CH$PLUS (.CMD_PTR, 1);
END;
[VERB_K_PASTE] :
EDT$$GET_BUF ();
[OUTRANGE] :
0;
TES;
!+
! Now, execute the command, and terminate the loop if it fails.
!-
IF .EXECUTE
THEN
BEGIN
SUCCEED = EDT$$EXE_CHMCMD1 (.VERB, .REPT_COUNT, .OPERAND, .EXPLICIT_REPEAT);
IF (.SUCCEED NEQ 1) THEN RETURN (.SUCCEED);
END;
END;
END;
IF .EXI THEN RETURN (1);
END;
RETURN (1);
END; ! of routine EDT$$CHM_PAREXE
END
ELUDOM