Trailing-Edge
-
PDP-10 Archives
-
bb-ee87a-sb
-
10,7/dil/dixgen.bli
There are 22 other files named dixgen.bli in the archive. Click here to see a list.
%TITLE 'DIXGEN -- multi-type conversions'
MODULE dixgen
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1983, 1985.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!++
! .CHAPTER >DIXGEN
!
! FACILITY: Data Conversion Routines (DIX)
!
! ABSTRACT: Conversion routines inherently touching more than one type,
! including mixed type conversions and multi-type interface routines.
!
! ENVIRONMENT:
!
! AUTHOR: David Dyer-Bennet, Creation Date: 23-Feb-82
!--
( !
IDENT = '2.0(50)' ! \.P;
! **EDIT**
%REQUIRE ('DIXSWI.REQ') ! [%O'34']
%BLISS36 (
, ENTRY ( ! ;.p;Entry names:
dixgen, dixdxf, dixfxd, dixpxd, dixdxp, dixfxp, dixpxf ! \
) ! End entry name list
) ! End %BLISS36 conditional
) =
BEGIN
!++
! .hl 1 Require files
!--
REQUIRE 'DIXREQ.REQ'; ! \.p;\
%sbttl 'Edit History' ! [7] Add this entire subsection
!++
! .hl 1 Edit History
!--
LIBRARY 'VERSION';
! ; .autotable
!++ COPY
new_version (1, 0)
edit (7, '23-Aug-82', 'David Dyer-Bennet')
%( Change version and revision standards everywhere.
Files: All. )%
edit (10, '22-Sep-82', 'David Dyer-Bennet')
%( Always use long_relative addressing on VAX. )%
edit (11, '27-Sep-82', 'David Dyer-Bennet')
%( In DIX$$CON_GEN in DIXGEN add call to DIX$$CHECK_FFD to avoid branch
to random location if invalid FFD's are passed in.
Files: DIXGEN.BLI )%
Edit (%O'30', '19-Jan-83', 'David Dyer-Bennet')
%( Update copyright notices, add mark at end of edit histories.
)%
Edit (%O'34', '19-May-83', 'David Dyer-Bennet')
%( Add DIXSWI require file to headings of all modules. DIXSWI
contains the BLISS32 addressing-mode declarations and the TOPS-10
OTS declaration to avoid invoking the losing default of .REQUESTING
the OTS library from whatever directory the compiler was called from
when the build ran.
)%
Edit (%O'35', '7-June-83', 'Charlotte L. Richardson')
%( Declare version 1 complete. All modules.
)%
new_version (1, 1)
new_version (2, 0)
Edit (%O'36', '11-Apr-84', 'Sandy Clemens')
%( Put all Version 2 DIX development files under edit control. Some of
the files listed below have major code edits, or are new modules. Others
have relatively minor changes, such as cleaning up a comment.
FILES: COMDIX.VAX-COM, COMPDX.CTL, DIXCST.BLI, DIXDEB.BLI,
DIXDN.BLI (NEW), DIXFBN.BLI, DIXFP.BLI, DIXGBL.BLI, DIXGEN.BLI,
DIXHST.BLI, DIXINT.PR1, DIXINT.PR2, DIXLIB.BLI, DIXPD.BLI (NEW),
DIXREQ.REQ, DIXSTR.BLI, DIXUTL.BLI, DXCM10.10-CTL, MAKDIXMSG.BLI,
STAR36.BLI, VERSION.REQ.
)%
Edit (%O'50', '8-Oct-84', 'Sandy Clemens')
%( Add new format of COPYRIGHT notice. FILES: ALL )%
! **EDIT**
!-- .autoparagraph
mark_versions ('DIX')
!++
! .hl 1 Debugging Declarations
!--
UNDECLARE %QUOTE $descriptor; ! \.p;\Something leaves this around.
dix$module_debug (on)
!++
! .hl 1 OWN storage
!--
! [7] Remove version number word
!++
! .HL 1 External references
! .S 1
! .LIST 0, "o"
!--
EXTERNAL ROUTINE
!++ COPY /STRIP .LE;
dix$$check_ffd: NOVALUE, ! [11]
dix$$con_fbin,
dix$$con_fp,
dix$$con_str,
dix$$con_dn,
dix$$con_pd,
dix$$con_dn_xi : NOVALUE,
dix$$con_pd_xi : NOVALUE,
dix$$con_fb_xi : NOVALUE,
dix$$con_xi_dn,
dix$$con_xi_pd,
dix$$con_xi_fb,
dix$$des_by_det,
dix$$port_hand,
dil$$return_kludge;
!-- .END LIST
%SBTTL 'GLOBAL ROUTINE dix$$con_dn_fb'
GLOBAL ROUTINE dix$$con_dn_fb ! \.!=;.hl 1\
! ; .index dix$$con_dn_fb
!++
! Portal for Display Numeric to Fixed Binary conversions.
!
! SCH: Level = 1, DD = 1, pseudonym = >dixdxf>.
!
! Algorithm: Convert display numeric string to fixed intermediate
! (XI) form. Convert XI to fixed point binary form. Use the same
! conversion routines called by single-type portals.
!
! Routine value: Status value, one of the following:
! .s 1.list 1 "o"
! .le;Any value returned by dix$$con_dn_xi
! .le;Any value returned by dix$$con_xi_fb
! .end list
!
! Formal arguements:
!--
( ! .s 1.list 1
src_ffd, ! \.le;\: Address of source FFD
dst_ffd ! \.le;\: Address of destination FFD
) =
BEGIN ! global routine dix$$con_dn_fb
MAP src_ffd : REF forgn_descr,
dst_ffd : REF forgn_descr;
dix$routine_debug (on)
LOCAL
error_tmp : VOLATILE, ! used by the condition handler
xi_field : xi; ! the intermediate form used
ENABLE dix$$port_hand (error_tmp); ! \Establish condition handler: \
dix$$check_ffd (.src_ffd);
dix$$check_ffd (.dst_ffd);
dix$$con_dn_xi (.src_ffd, xi_field); ! ;.p;Convert source DNUM field to XI
! ; form. Signals if error occurs.
dtype (on, 'XI field before scale adjustment: '); ! debugging code
debug_code (xidmp (xi_field); ! debugging code
tty_put_crlf()); ! debugging code
dix$$con_xi_fb (xi_field, .dst_ffd) ! ;.p; Convert XI form to destination
! ; FBIN field. Signals if error and
! ; may return a warning code.
END; ! end global routine dix$$con_dn_fb
%SBTTL 'GLOBAL ROUTINE dix$$con_dn_pd'
GLOBAL ROUTINE dix$$con_dn_pd ! \.!=;.hl 1\
! ; .index dix$$con_dn_pd
!++
! Portal for Display Numeric to Packed Decimal conversions.
!
! SCH: Level = 1, DD = 1, pseudonym = >dixdxp>.
!
! Algorithm: Convert display numeric string to fixed intermediate
! (XI) form. Convert XI to packed decimal form. Use the same
! conversion routines called by single-type portals.
!
! Routine value: Status value, one of the following:
! .s 1.list 1 "o"
! .le;Any value returned by dix$$con_dn_xi
! .le;Any value returned by dix$$con_xi_pd
! .end list
!
! Formal arguements:
!--
( ! .s 1.list 1
src_ffd, ! \.le;\: Address of source FFD
dst_ffd ! \.le;\: Address of destination FFD
) =
BEGIN ! global routine dix$$con_dn_pd
MAP src_ffd : REF forgn_descr,
dst_ffd : REF forgn_descr;
dix$routine_debug (on)
LOCAL
error_tmp : VOLATILE, ! used by the condition handler
xi_field : xi; ! the intermediate form used
ENABLE dix$$port_hand (error_tmp); ! \Establish condition handler: \
dix$$check_ffd (.src_ffd);
dix$$check_ffd (.dst_ffd);
dix$$con_dn_xi (.src_ffd, xi_field); ! ;.p;Convert source DNUM field to XI
! ; form. Signals if error occurs.
dtype (on, 'XI field before scale adjustment: '); ! debugging code
debug_code (xidmp (xi_field); ! debugging code
tty_put_crlf()); ! debugging code
dix$$con_xi_pd (xi_field, .dst_ffd) ! ;.p; Convert XI form to destination
! ; PDEC field. Signals if error and
! ; may return a warning code.
END; ! end global routine dix$$con_dn_pd
%SBTTL 'GLOBAL ROUTINE dix$$con_fb_dn'
GLOBAL ROUTINE dix$$con_fb_dn ! \.!=;.hl 1\
! ; .index dix$$con_fb_dn
!++
! Portal for Fixed Binary to Display Numeric conversions.
!
! SCH: Level = 1, DD = 1, pseudonym = >dixfxd>.
!
! Algorithm: Convert fixed point binary field to fixed intermediate
! (XI) form. Convert XI to display numeric string. Use the same
! conversion routines called by single-type portals.
!
! Routine value: Status value, one of the following:
! .s 1.list 1 "o"
! .le;Any value returned by dix$$con_fb_xi
! .le;Any value returned by dix$$con_xi_dn
! .end list
!
! Formal arguements:
!--
( ! .s 1.list 1
src_ffd, ! \.le;\: Address of source FFD
dst_ffd ! \.le;\: Address of destination FFD
) =
BEGIN ! global routine dix$$con_fb_dn
MAP src_ffd : REF forgn_descr,
dst_ffd : REF forgn_descr;
dix$routine_debug (on)
LOCAL
error_tmp : VOLATILE, ! used by the condition handler
xi_field : xi; ! the intermediate form used
ENABLE dix$$port_hand (error_tmp); ! \Establish condition handler: \
dix$$check_ffd (.src_ffd);
dix$$check_ffd (.dst_ffd);
dix$$con_fb_xi (.src_ffd, xi_field); ! ;.p;Convert source FBIN field to XI
! ; form. Signals if error occurs.
dtype (on, 'XI field before scale adjustment: '); ! debugging code
debug_code (xidmp (xi_field); ! debugging code
tty_put_crlf()); ! debugging code
dix$$con_xi_dn (xi_field, .dst_ffd) ! ;.p; Convert XI form to destination
! ; DNUM field. Signals if error and
! ; may return a warning code.
END; ! end global routine dix$$con_fb_dn
%SBTTL 'GLOBAL ROUTINE dix$$con_fb_pd'
GLOBAL ROUTINE dix$$con_fb_pd ! \.!=;.hl 1\
! ; .index dix$$con_fb_pd
!++
! Portal for Fixed Binary to Packed Decimal conversions.
!
! SCH: Level = 1, DD = 1, pseudonym = >dixfxp>.
!
! Algorithm: Convert fixed point binary field to fixed intermediate
! (XI) form. Convert XI to packed decimal form. Use the same
! conversion routines called by single-type portals.
!
! Routine value: Status value, one of the following:
! .s 1.list 1 "o"
! .le;Any value returned by dix$$con_fb_xi
! .le;Any value returned by dix$$con_xi_pd
! .end list
!
! Formal arguements:
!--
( ! .s 1.list 1
src_ffd, ! \.le;\: Address of source FFD
dst_ffd ! \.le;\: Address of destination FFD
) =
BEGIN ! global routine dix$$con_fb_pd
MAP src_ffd : REF forgn_descr,
dst_ffd : REF forgn_descr;
dix$routine_debug (on)
LOCAL
error_tmp : VOLATILE, ! used by the condition handler
xi_field : xi; ! the intermediate form used
ENABLE dix$$port_hand (error_tmp); ! \Establish condition handler: \
dix$$check_ffd (.src_ffd);
dix$$check_ffd (.dst_ffd);
dix$$con_fb_xi (.src_ffd, xi_field); ! ;.p;Convert source FBIN field to XI
! ; form. Signals if error occurs.
dtype (on, 'XI field before scale adjustment: '); ! debugging code
debug_code (xidmp (xi_field); ! debugging code
tty_put_crlf()); ! debugging code
dix$$con_xi_pd (xi_field, .dst_ffd) ! ;.p; Convert XI form to destination
! ; PDEC field. Signals if error and
! ; may return a warning code.
END; ! end global routine dix$$con_fb_pd
%SBTTL 'GLOBAL ROUTINE dix$$con_pd_dn'
GLOBAL ROUTINE dix$$con_pd_dn ! \.!=;.hl 1\
! ; .index dix$$con_pd_dn
!++
! Portal for Packed Decimal to Display Numeric conversions.
!
! SCH: Level = 1, DD = 1, pseudonym = >dixpxd>.
!
! Algorithm: Convert packed decimal to fixed intermediate (XI) form.
! Convert XI to display numeric form. Use the same conversion
! routines called by single-type portals.
!
! Routine value: Status value, one of the following:
! .s 1.list 1 "o"
! .le;Any value returned by dix$$con_pd_xi
! .le;Any value returned by dix$$con_xi_dn
! .end list
!
! Formal arguements:
!--
( ! .s 1.list 1
src_ffd, ! \.le;\: Address of source FFD
dst_ffd ! \.le;\: Address of destination FFD
) =
BEGIN ! global routine dix$$con_pd_dn
MAP src_ffd : REF forgn_descr,
dst_ffd : REF forgn_descr;
dix$routine_debug (on)
LOCAL
error_tmp : VOLATILE, ! used by the condition handler
xi_field : xi; ! the intermediate form used
ENABLE dix$$port_hand (error_tmp); ! \Establish condition handler: \
dix$$check_ffd (.src_ffd);
dix$$check_ffd (.dst_ffd);
dix$$con_pd_xi (.src_ffd, xi_field); ! ;.p;Convert source PDEC field to XI
! ; form. Signals if error occurs.
dtype (on, 'XI field before scale adjustment: '); ! debugging code
debug_code (xidmp (xi_field); ! debugging code
tty_put_crlf()); ! debugging code
dix$$con_xi_dn (xi_field, .dst_ffd) ! ;.p; Convert XI form to destination
! ; DNUM field. Signals if error and
! ; may return a warning code.
END; ! end global routine dix$$con_pd_dn
%SBTTL 'GLOBAL ROUTINE dix$$con_pd_fb'
GLOBAL ROUTINE dix$$con_pd_fb ! \.!=;.hl 1\
! ; .index dix$$con_pd_fb
!++
! Portal for Packed Decimal to Fixed Binary conversions.
!
! SCH: Level = 1, DD = 1, pseudonym = >dixpxf>.
!
! Algorithm: Convert packed decimal to fixed intermediate (XI) form.
! Convert XI to fixed point binary form. Use the same conversion
! routines called by single-type portals.
!
! Routine value: Status value, one of the following:
! .s 1.list 1 "o"
! .le;Any value returned by dix$$con_pd_xi
! .le;Any value returned by dix$$con_xi_fb
! .end list
!
! Formal arguements:
!--
( ! .s 1.list 1
src_ffd, ! \.le;\: Address of source FFD
dst_ffd ! \.le;\: Address of destination FFD
) =
BEGIN ! global routine dix$$con_pd_fb
MAP src_ffd : REF forgn_descr,
dst_ffd : REF forgn_descr;
dix$routine_debug (on)
LOCAL
error_tmp : VOLATILE, ! used by the condition handler
xi_field : xi; ! the intermediate form used
ENABLE dix$$port_hand (error_tmp); ! \Establish condition handler: \
dix$$check_ffd (.src_ffd);
dix$$check_ffd (.dst_ffd);
dix$$con_pd_xi (.src_ffd, xi_field); ! ;.p;Convert source PDEC field to XI
! ; form. Signals if error occurs.
dtype (on, 'XI field before scale adjustment: '); ! debugging code
debug_code (xidmp (xi_field); ! debugging code
tty_put_crlf()); ! debugging code
dix$$con_xi_fb (xi_field, .dst_ffd) ! ;.p; Convert XI form to destination
! ; FBIN field. Signals if error and
! ; may return a warning code.
END; ! end global routine dix$$con_pd_fb
%SBTTL 'GLOBAL ROUTINE dix$$con_gen'
GLOBAL ROUTINE dix$$con_gen ! \.!=;.hl 1 \
! ; .index dix$$con_gen
!++
! Portal For All Data Types
!
! SCH: Level = 1, DD = 2, pseudonym = >DIXGEN>.
!
! Algorithm: Use source and destination data types to index into a
! two-dimensional table and determine the proper portal routine to call,
! then do so.
!
! Routine value: status value, one of the following:
! .s 1.list 1, "o"
! .le;dix$_unimp [11]
! .LE;Any value returned by dix$$check_ffd [11]
! .le;Any value returned by dix$$con_str
! .le;Any value returned by dix$$con_fbin
! .le;Any value returned by dix$$con_fp
! .le;Any value returned by dix$$con_dn
! .le;Any value returned by dix$$con_pd
! .le;Any value returned by dix$$con_dn_fb
! .le;Any value returned by dix$$con_dn_pd
! .le;Any value returned by dix$$con_fb_dn
! .le;Any value returned by dix$$con_fb_pd
! .le;Any value returned by dix$$con_pd_fb
! .le;Any value returned by dix$$con_pd_dn
! .end list
!
! Formal arguments:
! .s 1
! .list 1
!--
(
src_ffd, ! \.le;\: Adr of source field descriptor
dst_ffd ! \.le;\: Adr of dest field descriptor
) = ! ; .end list
BEGIN ! dix$$con_gen
MAP
src_ffd : REF forgn_descr,
dst_ffd : REF forgn_descr;
OWN
!++
! .hl 2 >gen_dispatch_tbl (own)
! This table gives the portal routine to dispatch to for all
! possible pairs of source and destination type-classes. It is
! statically initialized. The first subscript specifies source
! data type class; the second, destination.
!--
gen_dispatch_tbl : array [1, dix$k_max_class, 1, dix$k_max_class]
PSECT (readonly_psect)
PRESET ( ! ; Supported conversions:
! ; .list "o"
[dt_string, dt_string] = dix$$con_str, ! ;.le;string to string
[dt_fbin, dt_fbin] = dix$$con_fbin, ! ;.le;fbin to fbin
[dt_fp, dt_fp] = dix$$con_fp, ! ;.le;fp to fp
[dt_dnum, dt_dnum] = dix$$con_dn, ! ;.le;dnum to dnum
[dt_pdec, dt_pdec] = dix$$con_pd, ! ;.le;pdec to pdec
[dt_dnum, dt_fbin] = dix$$con_dn_fb, ! ;.le;dnum to fbin
[dt_dnum, dt_pdec] = dix$$con_dn_pd, ! ;.le;dnum to pdec
[dt_fbin, dt_dnum] = dix$$con_fb_dn, ! ;.le;fbin to dnum
[dt_fbin, dt_pdec] = dix$$con_fb_pd, ! ;.le;fbin to pdec
[dt_pdec, dt_fbin] = dix$$con_pd_fb, ! ;.le;pdec to fbin
[dt_pdec, dt_dnum] = dix$$con_pd_dn ! ;.le;pdec to dnum
! ; .end list
) ! End PRESET
; ! end OWN
LOCAL
rtn_adr,
handler_temp : VOLATILE;
! ; .hl 2 Flow of code
ENABLE ! \.P;\
dix$$port_hand (handler_temp); ! \
dix$$check_ffd (.src_ffd); ! [11] Make sure index is valid
dix$$check_ffd (.dst_ffd); ! [11] Make sure index is valid
rtn_adr = .gen_dispatch_tbl [.src_ffd [ffd$v_dt_class], .dst_ffd [ffd$v_dt_class]];
IF .rtn_adr EQL 0 THEN RETURN dix$_unimp; ! We don't know how to do that!
(.rtn_adr) (.src_ffd, .dst_ffd) ! ; .P;Call routine indicated, return value
! (by default, use default linkage)
END; ! dix$$con_gen
END ! End MODULE dixgen
ELUDOM