Trailing-Edge
-
PDP-10 Archives
-
bb-d868c-bm_tops20_v4_2020_distr
-
language-sources/h2addr.bli
There are 18 other files named h2addr.bli in the archive. Click here to see a list.
!THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
! OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
!
!COPYRIGHT (C) 1972,1973,1974,1977,1978 DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS. 01754
!FILENAME: H2ADDR.BLI
!DATE: 30 MAY 73 MGM/FLD
%3.2% GLOBAL BIND H2ADV=1; !MODULE VERSION NUMBER
! GENERAL DOCUMENTATION FOR ADDRESS.BLI
!
! THE PRIMARY PURPOSE OF THIS MODULE IS THE COMPUTATION OF THE ADDRESS
! PORTION OF AN INSTRUCTION. THERE ARE ALSO SEVERAL PREDICATES RELATING TO
! THE KIND OF ADDRESSABILITY PRESENT IN A LEXEME. THE ROUTINES WHICH
! CALCULATE ADDRESSES RETURN THEIR VALUES IN CODE-3 FORMAT AS PICTURED BELOW:
!
! CODE-3 FORMAT
!
!
!............................................................................................................
!\ ! !\ \ \ ! ! ! ! !
! \! ! \ \ \! ! ! ! !
! ! ! \ \ ! ! ! ! !
!\ ! RELOCF !\ \ \ ! RELRF ! I! X ! Y !
! \! ! \ \ \! ! ! ! !
! ! ! \ \ ! ! ! ! !
!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!
! 30 24 18 12 6
!
!
! FIELDS:
!
! RELOCF: 5-BIT CODE FOR THE LOADER INTERFACE
!
! RELRF: IF NON-ZERO, THIS IS THE ADDRESS OF A REGISTER WHOSE USE
! IS TO BE DECREASED WHEN THE INSTRUCTION IS GENERATED
! WHICH USES THIS ADDRESS.
!
! I: THE INDIRECT BIT
! X: THE INDEX REGISTER
! Y: "ADDRESS" SUBJECT TO RELOCATION BY LOADER IF RELOCF NEQ 0
! THE FOLLOWING TABLE EXPRESSES THE RELATIONSHIP BETWEEN SYMBOL TABLE
! TYPES, THEIR RELOCATION TYPES, AND WHETHER THESE TYPES CAN VALIDLY FILTER
! DOWN TO THE CODE GENERATION ROUTINES.
!
!
! TYPE TYPE # VALID RELOCTYPE
!
! DELMT #00 NO N.A.
! UNDEDT #01 NO N.A.
! GLOBALT #02 YES GLORELOC
! OWNT #03 YES OWNRELOC
! EXTRNT #04 YES EXTRELOC
! LOCALT #05 YES LOCRELOC
! BINDT #06 YES LOCRELOC
! FORMALT #07 YES NORELOC
! ROUTINET #10 YES CTRELOC
! EXPRT #11 YES EXPRELOC
! GROUTINET #12 YES CTRELOC
! FUNCT #13 YES CTRELOC
! STFORMT #14 YES NORELOC
! PLITT #15 YES PLRELOC
! LABELT #16 NO N.A.
! FORWT #17 YES CTRELOC
! REGT #20 NO N.A.
! GABSOLUTET #21 NO N.A.
! GPLITT #22 YES PLRELOC
! STRT #30 YES CTRELOC
! MACROT #31 NO N.A.
! LEXEMT #32 NO N.A.
! MACHOPT #40 NO N.A.
! SPLFT #41 NO N.A.
! ABSOLUTET #42 NO N.A.
! SPUNOPT #43 NO N.A.
!
!
FORWARD COPTR,FSA;
FORWARD GLTM,GMA,GPA,MADRIR;
FORWARD READY;
GLOBAL ROUTINE GPA(X)=
! (GENERATE POINTER ADDRESS)
%X IS A LEXEME OF THE FORM .(N+@R)<P,S> WHERE EITHER N XOR @R
MAY BE ABSENT AND P,S HAVE NO SPECIAL VALUES AND MAY EVEN BE
UNSET. GPA GENERATES CODE TO GENERATE THE POINTER (N+@R)<P,S>
ASSUMING THAT GENERATION OF A LDB FOLLOWS IMMEDIATELY SO THAT
THE POINTER MAY BE INDEXED. THE VALUE OF GPA IS THE ADDRESS
OF THE POINTER IN CODE-3 FORMAT%
BEGIN LOCAL Y;
IF .X<POSNSIZEF> EQL 0 THEN RETURN GMA(.X AND NOT COPM);
Y_GMA(.X);
%2.22% !WE MUST TURN OFF THE BIT IN .Y WHICH IS NOT USED
%2.22% !IN THE STD 10 BYTE POINTER SINCE COPTR WILL LEAVE IT ON.
%2.22% !THIS IS BIT 40,,0.
RMA(.Y<RELRF>,0,COPTR(.X<POSNF>,.X<SIZEF>,.Y AND NOT(#40^18)))
END;
GLOBAL ROUTINE GMA(X)=
! (GENERATE MACHINE ADDRESS)
%X IS A LEXEME. IT MAY TAKE THE SPECIAL FORM @R, IN WHICH CASE
GMA IS LIKE REGAR. OTHERWISE X TAKES ONE OF TWO FORMS: EITHER
1) .(N+@R)<P,S>; OR 2) (N+@R)<P,S>. IN BOTH CASES EITHER N XOR
@R MAY BE ABSENT. IN NEITHER CASE IS THE NEG OR NOT BIT SET.
IN EITHER CASE GMA PRODUCES FOR ITS VALUE AN ADDRESS IN CODE-3
FORMAT, POSSIBLY GENERATING CODE FIRST.
IN CASE (1): GMA ASSUMES THAT THE LOAD INSTRUCTION WILL BE
CODED PROMPTLY AFTER RETURN FROM GMA, SO THAT IT MAY RETURN AN
INDEXED ADDRESS. IT FURTHER ASSUMES THAT THE P,S FIELDS ARE TO
BE HANDLED OUTSIDE GMA SO THAT IT NEED ONLY RETURN THE ADDRESS
(N+@R) WITH 18 BIT ADDITION.
IN CASE (2): GMA PRODUCES THE ADDRESS OF THE POINTER
(N+@R)<P,S> WHICH IT FIRST GENERATES; HOWEVER THE POINTER IS
UNINDEXED SO THAT ACCESS TO THE BYTE MAY BE POSTPONED.%
BEGIN
X<NGNTF>_0;
IF PTRTYPP(.X) THEN RETURN MCOPTRFRPTRTYP(.X);
IF .X<LSSTEF> EQL ZERO THEN X<LSSTEF>_0;
!! HERE WE SEE IF X IS A REGISTER LEXEME SO GMA CAN SIMPLY CALL REGAR
IF REGP(.X) THEN IF
NOT(.RT[.X<RTEF>]<RSF> AND .X<DTF>) THEN
RETURN REGAR(.X);
BEGIN
ROUTINE MOVEDEC(R)=
! MOVES DECLARED OR MULTIPLY USEFUL REGISTER TO A TEMPORARY
BEGIN REGISTER D;
D_.R;
R_IF .LOADECREG GEQ 0 THEN .LOADECREG ELSE ACQUIRE(-1,1);
IF .R NEQ .D THEN CODE(MOVE,.R,REGAR(LEXRA(.D)),1);
.R
END;
ROUTINE GETREG=
IF .LOADECREG GEQ 0 THEN .LOADECREG
ELSE ACQUIRE(-1,1);
LOCAL REG,TEMP,ADDRESS,TYPE,FLEVEL;
REGISTER
NAME, ! .X<RTEF>
STINDEX, ! .X<STEF>
SWITCH; ! 0 --> STACK VAR./SAME FLEVEL, 1 --> STACK VAR./DIFF. FLEVEL,
! 2 --> NOT STACK VAR.
IF (NAME_.X<RTEF>) NEQ 0 THEN
BEGIN
IF .X<DTF> AND .RT[.NAME]<RSF> THEN
BEGIN
! RTEF OF X POINTS TO TEMPORARY MEMORY. IF X IS A REGISTER-
! TYPE LEXEME THEN WE GENERATE THE ADDRESS OF THE LOCAL.
! OTHERWISE THE RTEF IS GOING TO BE USED IN AN INDEXING
! OPERATION AND SO IT MUST BE RELOADED INTO A REGISTER.
IF REGP(.X) THEN
BEGIN
X_LEXNPSD(.RT[.NAME]<LSSTEF>,0,36,1);
DUM(.NAME);
RETURN GMA(.X)
END;
REG_RELOADTEMP(0,.NAME);
TEMP_1
END
ELSE
BEGIN
REG_.RT[.NAME]<ARTEF>;
TEMP_TVRP(LEXRN(.NAME))
END
END
ELSE REG_0;
STINDEX_.X<STEF>;
ADDRESS_
IF .X<LSF> THEN
BEGIN
CHECKEXTER(.STINDEX);
TYPE_.ST[.STINDEX,0]<TYPEF>;
IF (1^.TYPE AND VALIDTYPE) EQL 0 THEN PUNT(ERINVLEX);
FSA(.STINDEX)
END
ELSE
BEGIN
TYPE_0;
LITV(.X<LSSTEF>) AND RIGHTM
END;
SWITCH_
IF STACKVAR^(-.TYPE) THEN
(FLEVEL_.ST[.STINDEX,0]<FLF>) NEQ .FUNCTIONLEVEL
ELSE 2;
IF .X<COPF> THEN
!!! NOW WE HANDLE CASE (1)
RETURN(
IF .REG EQL 0 THEN
CASE .SWITCH OF SET
.FREG^18 OR .ADDRESS;
BEGIN
REG_GETREG();
CODE(MOVE,.REG,.FREG^18 OR (.FLEVEL+1),1);
RMA(.REG,.REG,.ADDRESS)
END;
IF .ADDRESS LSS 16 AND NOT .X<LSF> THEN
RMA(.ADDRESS,0,.ADDRESS)
ELSE .ADDRESS
TES ELSE
IF .SWITCH NEQ 2 THEN
BEGIN
IF NOT .TEMP AND (.REG NEQ .LOADECREG) THEN
REG_MOVEDEC(.REG);
CODE(ADD,.REG,
IF .SWITCH THEN .FREG^18 OR (.FLEVEL+1) ELSE .FREG,
1);
RMA(.REG,.REG,.ADDRESS)
END
ELSE RMA(.REG,.REG,.ADDRESS));
IF .X<POSNSIZEF> EQL 0 THEN
!!! NOW WE HANDEL CASE(2) WHERE P AND S ARE ZERO
RETURN(
IF .REG EQL 0 AND .X<RTEF> EQL 0 THEN
IF .X<LSF> THEN
IF .SWITCH LEQ 1 THEN
BEGIN
REG_GETREG();
IF .SWITCH EQL 0 THEN
CODE(HRRZI,.REG,.FREG^18 OR .ADDRESS,1)
ELSE
BEGIN
CODE(MOVE,.REG,.FREG^18 OR (.FLEVEL+1),1);
CODE(HRRZI,.REG,.REG^18 OR .ADDRESS,1)
END;
RMA(.REG,0,.REG)
END
ELSE COPTR(0,0,.ADDRESS)
ELSE LITA(.X)
ELSE
BEGIN
IF NOT .TEMP THEN IF .REG NEQ .LOADECREG THEN
IF NOT (.X<LSF> AND (.SWITCH EQL 0)) THEN
REG_MOVEDEC(.REG);
IF .X<LSF> THEN
CASE .SWITCH OF SET
BEGIN
TEMP_ACQUIRE(-1,1);
CODE(HRRZI,.TEMP,.FREG^18 OR .ADDRESS,1);
CODE(HRLI,.TEMP,36^6,1);
CODE(ADD,.TEMP,RMA(.REG,0,.REG),1);
REG_.TEMP
END;
BEGIN
CODE(ADD,.REG,.FREG^18 OR (.FLEVEL+1),1);
CODE(ADD,.REG,COPTR(0,36,.ADDRESS),1)
END;
CODE(ADD,.REG,COPTR(0,36,.ADDRESS),1)
TES
ELSE FALR(.REG,.X);
RMA(.REG,0,.REG)
END);
!!! CASE(2) NOW WITH P+S NEQ 0
ADDRESS_GMA(.X OR DOTM);
IF .ADDRESS<INDXF> EQL 0 THEN
RETURN COPTR(.X<POSNF>,.X<SIZEF>,.ADDRESS);
IF USABLEINDEXREG(.ADDRESS) AND (.LOADECREG LSS 0) THEN
REG_.ADDRESS<INDXF>
ELSE CODE(HRRZI,REG_GETREG(),.ADDRESS,1);
CODE(HRLI,.REG,.X<POSNF>^12 OR .X<SIZEF>^6,1);
RMA(.REG,0,.REG)
END
END;
GLOBAL ROUTINE FSA(STINDEX)=
! (FIND SYMBOL ADDRESS)
! STINDEX IS THE ST INDEX OF A SYMBOL; FSA PRODUCES THE ADDRESS
! OF THE SYMBOL IN CODE-3 FORMAT. RELOCATION COMES FROM THE SIX WORD
! (SIX SIX-BIT BYTES PER WORD) VECTOR RELOCBITS.
BEGIN LOCAL SYMTYPE,ADDRESS;
STRUCTURE RELOCVEC[I]=(.RELOCVEC +.I/6)<.I MOD 6 *6,6>;
BIND RELOCVEC RELOCBITS=PLIT(
GLORELOC^(GLOBALT MOD 6 *6) OR
OWNRELOC^(OWNT MOD 6 *6) OR
EXTRELOC^(EXTRNT MOD 6 *6) OR
LOCRELOC^(LOCALT MOD 6 *6) ,
LOCRELOC^(BINDT MOD 6 *6) OR
NORELOC^(FORMALT MOD 6 *6) OR
CTRELOC^(ROUTINET MOD 6 *6) OR
EXPRELOC^(EXPRT MOD 6 *6) OR
CTRELOC^(GROUTINET MOD 6 *6) OR
CTRELOC^(FUNCT MOD 6 *6) ,
NORELOC^(STFORMT MOD 6 *6) OR
PLRELOC^(PLITT MOD 6 *6) OR
CTRELOC^(FORWT MOD 6 *6) ,
PLRELOC^(GPLITT MOD 6*6) ,
CTRELOC^(STRT MOD 6 *6) ,
0 );
%2.12% CHECKEXTER(.STINDEX); !IF UNDECLARED, WARN & DECLARE EXTERNAL
SYMTYPE_.ST[.STINDEX,0]<TYPEF>;
ADDRESS<RELOCF>_.RELOCBITS[.SYMTYPE];
ADDRESS_
IF (1^RTNT OR 1^GROUTINET OR 1^FUNCT OR 1^STRT OR 1^FORWT)^(-.SYMTYPE) THEN
.ST[.STINDEX,1]<STEF> ELSE
IF (1^EXTRNT OR 1^EXPRT)^(-.SYMTYPE) THEN .STINDEX
ELSE .ST[.STINDEX,1]<ADDRESSF>;
ADDRESS<RELOCF>_.(RELOCBITS+.SYMTYPE/6)<.SYMTYPE MOD 6*6,6>;
.ADDRESS
END;
! POINTERS WHICH NEED RELOCATION BY THE LOADER ARE PUT IN A VECTOR
! OF TWO-WORD CELLS CALLED PT. A CELL LOOKS LIKE:
!
!............................................................................................................
!\ ! !\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ !
! \! ! \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \!
! ! ! \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ !
!\ ! RELOCF !\ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ !
! \! ! \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \!
! ! ! \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ !
!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!
! ! !\ ! ! ! !
! ! ! \! ! ! !
! ! ! ! ! ! !
! P ! S !\ ! I! X ! Y !
! ! ! \! ! ! !
! ! ! ! ! ! !
!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!..!
! 30 24 18 12 6
GLOBAL ROUTINE COPTR(P,S,Y)=
! (CONSTANT POINTER)
! A CONSTANT POINTER IS AN EXPRESSION OF THE FORM N<P,S>
! WHERE P,S ARE BOTH COMPILE-TIME CONSTANTS. Y MUST BE
! AN ADDRESS IN CODE-3 FORMAT AND P,S MUST BE INTEGERS IN
! THE RANGE 0 TO 36. COPTR GENERATES THE POINTER Y<P,S>
! ENTERING IT IN THE LT IF Y REQUIRES NO FURTHER
! RELOCATING AND IN THE PT OTHERWISE. IN EITHER CASE
! HASHING ASSURES NO DUPLICATION. THE VALUE OF COPTR
! IS THE ADDRESS OF THE POINTER IN CODE-3 FORMAT.
BEGIN
LOCAL
H, ! INDEX OF LT OR PT ENTRY/ RETURN VALUE
P1,P2; ! COPIES OF TWO-WORD PT ENTRY
REGISTER
POINTER,! 36-BIT POINTER
YRELOC; ! .Y<RELOCF>
%2.22% POINTER_(.P AND #77)^30 OR (.S AND #77)^24 OR (.Y AND NOTPSMASK);
IF (YRELOC_.Y<RELOCF>) EQL NORELOC THEN
BEGIN
H_RMA(.Y<RELRF>,0,LTINSERT(.POINTER));
H<RELOCF>_LTRELOC;
RETURN .H
END;
H_((.P XOR .S XOR .YRELOC)*.Y<IXYF>) AND PTMASK;
H_
DECR I FROM PTMASK TO 0 DO
BEGIN
IF (P1_.PT[.H,0]) EQL 0 AND
(P2_.PT[.H,1]) EQL 0 THEN
BEGIN
PT[.H,0]<RELOCF>_.YRELOC;
PT[.H,1]_.POINTER;
EXITLOOP .H
END;
IF .P1<RELOCF> EQL .YRELOC THEN
IF .P2 EQL .POINTER THEN EXITLOOP .H;
H_(.H+PRIME) AND PTMASK
END;
IF .H LSS 0 THEN RETURN(ERROR(.NSYM,#775));
H<RELOCF>_PTRELOC;
H<RELRF>_.Y<RELRF>;
.H
END;
GLOBAL ROUTINE READY(X)=
%1 IF THE LEXEME X REPRESENTS AN EXPRESSION WHICH CAN BE ACCESSED
BY MEANS OF THE ADDRESS FIELD OF AN ORDINARY INSTRUCTION THUS
AVOIDING LOADING THE VALUE INTO A TEMPORARY REGISTER. 0 OTHERWISE%
BEGIN
IF .X<NEGF> THEN RETURN 0;
IF .X<NOTF> THEN RETURN 0;
IF NOT .X<COPF> THEN RETURN 1;
IF .X<POSNSIZEF> EQL 36 THEN RETURN 1;
IF .X<POSNSIZEF> EQL 0 THEN IF .X<RTEF> EQL 0 THEN RETURN 1;
0
END;
GLOBAL ROUTINE GLTM(X)=
! (GENERATE LOAD TEMPORARY MEMORY)
! X MUST BE A LEXEME SATISFYING TVMP. GLTM GENERATES
! CODE TO EVALUATE A UNARY - OR NOT THUS REDUCING THE
! LEXEME TO A STRAIGHT @R.
BEGIN
IF .X<NEGF> THEN CODE(MOVNS,0,GMA(X_GABS(.X)),0) ELSE
IF .X<NOTF> THEN CODE(SETCMM,0,GMA(X_GYES(.X)),0);
.X
END;
GLOBAL ROUTINE MADRIR(R,L)=
! (MACHINE-ADDRESS-RELEASE-INDEX-REGISTER)
BEGIN
R_REGAR(.R);
R<INDXF>_.R;
R<RIGHTF>_.L;
.R
END;
GLOBAL ROUTINE MEMORYA(Y)=
! (MEMORY-ADDRESS)
IF READY(.Y) THEN GMA(.Y)
ELSE REGAR(GLTR(.Y));
GLOBAL ROUTINE USABLEINDEXREG(X)=
! (USEABLE-INDEX-REGISTER) X IS IN CODE-3 FORMAT
IF (.X AND NOT(INDXM OR RELRM)) EQL 0 THEN
IF .X<INDXF> EQL .X<RELRF> THEN
TVRP(LEXRA(.X<INDXF>))
ELSE 0
ELSE 0;
GLOBAL ROUTINE VALPTRTYP(X)=
! RETURNS THE 36-BIT POINTER REPRESENTED BY THE SYMBOL WHOSE ST-INDEX
! IS X. X IS ALWAYS A PTRT
IF NORELOCPTRTYPP(.X)
THEN GETLITVAL(.ST[.X,1]<16,14>)
ELSE .PT[.ST[.X,1]<16,14>,1];
GLOBAL ROUTINE PTRTYPP(X)=
! PREDICATE INDICATING THAT THE LEXEME X IS A PTRT
IF .X<LSF> THEN .ST[.X<STEF>,0]<TYPEF> EQL PTRT;
GLOBAL ROUTINE MPTRTYP(L,X)=
! MAKES A PTRT ST-ENTRY ON GENSYMS WITH LEFTHALF FROM L AND RIGHT
! FROM LSSTEF OF X
BEGIN LOCAL IXYPART,PTLTINDEX,STINDEX;
IXYPART_
IF .X<LSF> THEN GMA((.X AND LSSTEM) OR DOTM)
ELSE LITV(.X AND LSSTEM) AND RIGHTM;
%2.26% IXYPART_.IXYPART OR (.L^18 AND #77^18);
PTLTINDEX_COPTR(.L<12,6>,.L<6,6>,.IXYPART) AND RIGHTM;
STINDEX_GETSPACE(1);
ST[.STINDEX,0]<TYPEF>_PTRT;
ST[.STINDEX,0]<BLF>_.BLOCKLEVEL;
ST[.STINDEX,0]<LINKF>_.GENSYMS;
ST[.STINDEX,1]<RELOCF>_.IXYPART<RELOCF>;
ST[.STINDEX,1]<LSSTEF>_.X<LSSTEF>;
ST[.STINDEX,1]<16,14>_.PTLTINDEX;
GENSYMS_.STINDEX;
.STINDEX OR (LSM OR #7777^21)
END;
GLOBAL ROUTINE MADDRFRPTRTYP(X)=
! MAKES UP AN ADDRESS IN CODE-3 FORMAT FROM A PTRT SYMBOL X
BEGIN LOCAL ADDRESS;
ADDRESS_VALPTRTYP(.X<STEF>) AND (1^22-1);
ADDRESS<RELOCF>_.ST[.X<STEF>,1]<RELOCF>;
.ADDRESS
END;
GLOBAL ROUTINE MCOPTRFRPTRTYP(X)=
! MAKES UP COPTR-TYPE CODE-3 ADDRESS FROM A PTRT SYMBOL X
BEGIN LOCAL ADDRESS;
ADDRESS_.ST[.X<STEF>,1]<16,14>;
ADDRESS<RELOCF>_
IF .ST[.X<STEF>,1]<RELOCF> EQL NORELOC THEN LTRELOC
ELSE PTRELOC;
.ADDRESS
END;
GLOBAL ROUTINE MLEXFRPTRTYP(X)=
!MAKES UP A LEXEME FROM THE PTRT SYMBOL X
BEGIN LOCAL PTR;
PTR_ VALPTRTYP(.X<STEF>);
LEXNPSD( .ST[.X<STEF>,1]<LSSTEF> OR
(IF .PTR<18,4> NEQ 0 THEN LEXRA(.PTR<18,4>)),
.PTR<30,6>, .PTR<24,6>,0)
END;
! END OF H2ADDR.BLI