Trailing-Edge
-
PDP-10 Archives
-
bb-d868c-bm_tops20_v4_2020_distr
-
4-documentation/filcom.doc
There are 21 other files named filcom.doc in the archive. Click here to see a list.
FILCOM.DOC -- Changes from V21A(55) to V21B(60)
January 1979
COPYRIGHT (C) 1973,1978,1979 BY
DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
TRANSFERRED.
THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.
DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
FLM21B.DOC Page 2
FILCOM.DOC -- Changes from V21A(55) to V21B(60)
January 1979
1.0 SUMMARY
This release of FILCOM resolves several SPRs.
This release will run on all supported monitors.
2.0 EXTERNAL CHANGES
This release includes 3 edits:
Edit #
56 EXE files were always being expanded, even if /W was used.
Also, handle EXE files generated by TOPS20. SPR # 10-26742.
57 Always stop comparing binary files as soon as the
user-specified upper limit is reached. No SPR.
60 Fix a bug that caused extra differences to be reported when
comparing EXE files. No SPR.
FLM21B.DOC Page 3
3.0 KNOWN BUGS AND DEFICIENCIES
None.
4.0 INSTALLATION INSTRUCTIONS
There are no changes in the installation instructions.
5.0 INTERNAL CHANGES
None.
6.0 SUGGESTIONS
None.
[End of FLM21B.DOC]
[FLM21A.DOC is appended as an integral part of FLM21B.DOC]
FLM21A.DOC Page 4
FILCOM.DOC -- Changes from V21(43) to V21A(55)
June 1978
1.0 SUMMARY
This release of FILCOM resolves several SPRs.
This release will run on all supported monitors.
2.0 EXTERNAL CHANGES
This release includes 10 edits:
Edit #
44 Consider carriage-return to be an EOL character if it is not
followed by LF, VT, of FF. This gets underlining right in
update mode. SPR # 10-22466.
45 Exit when through processing a command if ^Z was used to
terminate it. SPR # 10-22854.
46 Make buffers for headers big enough to handle the longest
possible filespecs. SPR # 10-23644.
47 Make all the month names 3 characters and lowercase. SPR #
10-23642.
50 Accept a line-terminating character in lieu of a closing
right-bracket. SPR # 10-23642.
51 Keep creation dates in the headers lined up. Note: this edit
supercedes edit 46. SPR # 10-23642.
52 Always produce a file in update mode, even if there are no
differences. SPR # 10-23873.
53 If second input filespec was a magtape, and /W, /E, of /X was
specified, no comparison was done and the first file was merely
listed. SPR # 10-23863.
54 Finish teaching FILCOM about large (more than a halfword)
addresses in EXE files. SPR # 10-25025.
55 Prevent sporadic bogus differences with line-numbered files.
SPR # 10-25063.
FLM21A.DOC Page 5
3.0 KNOWN BUGS AND DEFICIENCIES
None.
4.0 INSTALLATION INSTRUCTIONS
There are no changes in the installation instructions.
5.0 INTERNAL CHANGES
None.
6.0 SUGGESTIONS
None.
[End of FLM21A.DOC]
[FLM21.DOC is appended as an integral part of FLM21A.DOC]
FLM21.DOC Page 6
FILCOM.DOC -- Changes from V20A(17) to V21(43)
January 1977
1.0 SUMMARY
This is a release of FILCOM containing bug fixes and support for EXE
files and SFDs.
This release will run on all supported monitors.
2.0 EXTERNAL CHANGES
This release includes 20 edits:
Edit #
20 Checks for double = in binary mode.
21 Forces /1L if /U is seen to print one line changes only.
22 Makes FILCOM able to handle files larger than 2048 DISK blocks.
23 Makes FILCOM get the job's project number if only the
programmer number is specified, and the job's programmer number
if only the project number is specified.
24 Improve error messages for file not found etc.
25 Add support for EXE file comparisons.
26 Change "FOO: Z" to "FOO: BLOCK 1".
27 Allow EXE files to be printed out as SHR files are.
30 Take a quick exit if /Q is used and a difference is
encountered.
31 Clear internal buffers between commands.
32 Fix bad address calculation in SAV file expansion code.
33 Handle lines with only line sequence numbers as blank lines.
Also, handle page marks and BASIC-format line sequence numbers
correctly.
34 Fix bugs in update mode comparisons introduced by Edit 21.
35 Add command scanner and other support for handling SFDs in file
specifications.
FLM21.DOC Page 7
36 Make the header lines contain more accurate information and
include SFD information.
37 Compare EXE files correctly when their maps differ and the
second file is the shorter of the two.
40 Unused.
41 Do not write a null output file when no differences are
encountered on a comparison.
42 Allow the output file to have a null extension.
43 Handle EXE files with more than 1000 pages correctly.
3.0 KNOWN BUGS AND DEFICIENCIES
When a SHR/HGH file is being printed out, it's origin is always
assumed to be 400000, even if it begins at some other core location.
4.0 INSTALLATION INSTRUCTIONS
There are no changes in the installation instructions.
5.0 INTERNAL CHANGES
One new switch has been added to FILCOM. The /E switch indicates that
the current file is in EXE format. This switch is assumed if the file
has an extension of EXE. If a file is in EXE format, but has neither
an extension of EXE nor a /E switch, then the file will be treated as
if it were a straight binary file and will be compared accordingly.
File specifications may now include SFDs for the output and input
files. The FILCOM header line has been changed to include SFD
information and more information about where the input files are
actually being accessed from, regardless of logical names, ersatz
devices, etc.
6.0 SUGGESTIONS
None.
[End of FLM21.DOC]
[FLM20A.DOC is appended as an integral part of FLM21.DOC]
FLM20A.DOC Page 8
FILCOM.DOC -- Changes from V20(16) to V20A(17)
July 1973
1.0 SUMMARY
This version contains only one change, to conform to the DATE75
standard. It fully replaces version 20.
FILCOM is documented in Software Notebook Vol. #2. OPERATING SYSTEM
COMMANDS.
FILCOM runs on all supported monitor configurations.
2.0 EXTERNAL CHANGES
None.
3.0 KNOWN BUGS AND DEFICIENCIES
None.
4.0 INSTALLATION INSTRUCTIONS
The installation guide is FILCOM.CTL.
5.0 INTERNAL CHANGES
Edit #
17 Add DATE75 code.
[End of FLM20A.DOC]