Trailing-Edge
-
PDP-10 Archives
-
bb-bt99s-bb
-
10,7/galaxy/lptspl/lpttty.mac
There are 10 other files named lpttty.mac in the archive. Click here to see a list.
TITLE LPTTTY - Terminal driver (LP20 Emulation) for LPTSPL-10
SUBTTL D. Mastrovito/DPM/TL/DPM 16-OCT-89
;
;
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
; 1984,1985,1986,1987,1990.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
;
SEARCH GLXMAC ;SEARCH GALAXY PARAMETERS
SEARCH QSRMAC ;SEARCH QUASAR PARAMETERS
SEARCH ORNMAC ;SEARCH ORION/OPR PARAMETERS
SEARCH LPTMAC ;SEARCH LPTSPL PARAMETERS
SEARCH GALCNF ;SEARCH GALGEN PARAMETERS
PROLOG (LPTTTY)
IF2,<PRINTX Assembling GALAXY-10 LPTTTY>
SALL ;FOR CLEAN LISTINGS
.DIRECT FLBLST ;FOR CLEANER LISTINGS
ENTRY LPTTTY ;LOAD IF LIBRARY SEARCH
%%.LPT==:%%.LPT ;VERSION
SUBTTL LPTTTY - Dispatch table
; This module will drive either an LA120 or LA180 hard copy
; terminal as a printer. It is by far, the most simple of
; all the printer drivers for LPTSPL, and as such provides
; the customer with a template for writing drivers for other
; types of terminals (i.e. DIABLOs, etc.).
LPTTTY::DEVDSP (TTY,<Terminal>)
; Table of LA120/LA180 compatible terminal types
TTYTYP: SIXBIT /LA50 /
SIXBIT /LA120 /
SIXBIT /LA210 /
SIXBIT /LA180 /
G$$TTY
TTYLEN==.-TTYTYP ;LENGTH OF TABLE
; Some drivers require storage on a per-stream basis. There are several
; words reserved for this purpose in the job data base. The words may
; be defined as follows:
.ORG J$DWDS ;DEFINE WORDS STARTING AT J$DWDS
FOOWDS: BLOCK 2 ;OR WHATEVER YOU NEED, UP TO J$DWDS
TTYANS: BLOCK 1 ;TERMINAL IS OF TYPE "ANSI"
TTYLP2: BLOCK 1 ;[4106] LP20 SIMULATION FLAG
TTYSIZ:! ;END OF DRIVER SPECIFIC STORAGE
.ORG
IF2,<
IFL <DRVWDS-<TTYSIZ-J$DWDS>>,<
PRINTX ? Terminal driver definitions overflow storage
>
> ;END IF2
; Some drivers must maintain special status information bits. These
; may be stored in AC 'S'. The mask STSDRV defines those bits which
; are reserved to the driver.
SUBTTL TTYINX - Terminal Initialization
; Device initialization. This routine is called by the
; SETUP message processor to initialize device dependent
; data in the job data base.
;
; Call: MOVE J, job data base address
; MOVE M, Page containing SETUP message or 0 if LPTSPL startup
; PUSHJ P,TTYINX
;
; TRUE return: Initialization complete
; FALSE return: S1 contains -1 if must try a different driver, or
; S1 contains a standard response-to-setup code
; S2 contains any extra attributes (for RSU.FL)
TTYINX: JUMPE M,.RETT ;RETURN IF LPTSPL INITIALIZATION
MOVE S1,STREAM## ;GET STREAM NUMBER
MOVE S1,JOBOBA##(S1) ;AND THE OBJECT BLOCK
MOVE S1,OBJ.ND(S1) ;GET STATION NUMBER
PUSHJ P,LPTANF## ;MUST BE ANF-10
SKIPN J$LLAT(J) ; OR A LAT LINE
JUMPF INIT.1 ;NO: NOT OUR KIND OF DEVICE
MOVE S1,SUP.ST(M) ;GET DEVICE NAME
PUSHJ P,LPTLIN## ;GENERATE DEVICE NAME
JUMPF INIT.1 ;DEVICE NOT OUR TYPE
MOVE T1,J$LDEV(J) ;GET DEVICE NAME
DEVCHR T1,UU.PHY ;GET DEVICE CHARACTERISTICS
TXNE T1,DV.TTY ;DEFEND AGAINST NUL
TXNE T1,DV.DSK ; OR NOT A TTY
JRST INIT.3 ; OR CONTROLLING A JOB
MOVE T1,[2,,T2] ;SET UP UUO AC
MOVEI T2,.TOTRM ;WANT TO READ TERMINAL TYPE
MOVE T3,J$LION(J) ;GET I/O INDEX
TRMOP. T1, ;READ TERMINAL TYPE
JRST INIT.3 ;PREHISTORIC MONITOR
MOVSI T2,-TTYLEN ;AOBJN POINTER
CAME T1,TTYTYP(T2) ;KNOWN TERMINAL TYPE?
AOBJN T2,.-1 ;CHECK ENTIRE TABLE
JUMPGE T2,INIT.3 ;RETURN IF UNKNOWN
MOVEM T1,J$LTYP(J) ;SAVE AS UNIT TYPE FOR QUASAR
MOVE T1,[XWD 2,T2] ;UUO POINTER
MOVEI T2,.TOAT2 ;ANSI
MOVE T3,J$LION(J) ;GET UDX
TRMOP. T1, ;SEE IF ANSI TERMINAL
SETZ T1, ;ASSUME NOT
LDB T2,[POINTR (T1,T2.ACL)] ;PICK UP ANSI CONFORMANCE LEVEL
MOVEM T2,TTYANS(J) ;SET THAT AS THE ANSI FLAG
MOVE T1,[XWD 2,T2] ;UUO POINTER
MOVX T2,.TOLCT ;LC
MOVE T3,J$LION(J) ;GET UDX
TRMOP. T1, ;SEE IF LOWER-CASE
SETO T1, ;ASSUME UPPER-CASE
SETZM J$LLCL(J) ;DEFAULT TO UPPER CASE
TRNN T1,1 ;LOWER-CASE?
SETOM J$LLCL(J) ;YES, REMEMBER THAT
HRLZI T1,LPTTTY ;POINT TO DISPATCH TABLE
HRRI T1,J$$DEV(J) ;MAKE A BLT POINTER
BLT T1,J$$DND(J) ;COPY INTO JOB STORAGE AREA
SETOM J$FFDF(J) ;WE DO FORM FEEDS
MOVX S1,.OFLYE ;[4106] SIMULATE BY DEFAULT
LOAD S2,SUP.FL(M),SUFLP2 ;[4106] GET OPR-SET SIMULATION
CAIN S2,.OFLDF ;[4106] DEFAULTED?
MOVE S2,S1 ;[4106] YES, USE DEFAULT
SETZM TTYLP2(J) ;[4106] ASSUME NO LP20-SIMULATION
CAIE S2,.OFLNO ;[4106] GUESS RIGHT?
SETOM TTYLP2(J) ;[4106] NOPE, LP20-SIMULATION WANTED
SKIPE TTYLP2(J) ;[4106] SIMULATING LP20?
PUSHJ P,VFUINX## ;[4106] YES, INITIALIZE THE SIMULATOR
SETZ TF, ;[4106] MAKE EXTRA ATTRIBUTE WORD
STORE S2,TF,OF.LP2 ;[4106]
MOVE S2,TF ;[4106]
MOVEI S1,%RSUOK ;[4106] LOAD THE CODE
$RETT
INIT.1: MOVNI S1,1 ;-1 MEANS DEVICE NOT FOR US
$RETF ;RETURN
INIT.2: SKIPA S1,[%RSUNA] ;UNIT NOT AVAILABLE
INIT.3: MOVEI S2,%RSUDE ;UNIT WILL NEVER BE AVAILABLE
$RETF ;RETURN
SUBTTL TTYIPC - Special IPCF message processing
; This routine will process any special messages peculiar to
; the device driver.
;
; Call: MOVE M, IPCF message address
; MOVE S2, message type
; PUSHJ P,TTYIPC
;
; TRUE return: Message processed by this driver
; FALSE return: Message unknown to this driver
; S1 must contain -1, S2 must be preserved
TTYIPC: MOVNI S1,1 ;WE HAVE NO SPECIAL MESSAGE
$RETF ;RETURN
SUBTTL TTYSCD - Scheduler call
; This routine is provided for drivers which must do special
; things at LPTSPL job scheduler level. For most drivers, it
; is a no-op.
;
; Call: MOVE J, job data base address
; MOVE P1, stream number
; PUSHJ P,TTYSCD
;
; TRUE return: Always
; FALSE return: Never
TTYSCD::$RETT ;RETURN
SUBTTL TTYWAK - WAKEUP TIME CHECK
; This routine is provided for special devices that may have
; critical time dependencies. The driver is called buy the
; CHKTIM routine to see if a premature wakeup is necessary.
;
; Call: MOVE J, job data base address
; MOVE S1, current UDT
; MOVE S2, normal wakeup time
; PUSHJ P,TTYWAK
;
; TRUE return: OK to zero JOBWKT if needed
; FALSE return: Never zero JOBWKT under any circumstances
;
; On either return, S1 must be preserved and S2 may be altered to
; contain the desired wakeup time. Most drivers will always want
; their JOBWKT entry zeroed unless their keeping track of several
; wakeup times.
TTYWAK: $RETT ;RETURN
SUBTTL TTYOPX - OPEN device
; This routine will setup device specific information for an OPEN.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYOPX
;
; TRUE return: Appropriate response-to-setup code returned in S1
; FALSE return: ditto
TTYOPX: MOVEI T1,.IOASC ;OPEN MODE
PUSHJ P,LPTOPN## ;SETUP I/O, OPEN CHANNEL, ETC.
JUMPF OPEN.1 ;CAN'T HAVE IT RIGHT NOW
SKIPE TTYLP2(J) ;[4106] SKIP IF NO LP20 SIMULATION
PUSHJ P,VFUOPX## ;DO THE VFU OPEN TIME INTIALIZATION
PUSHJ P,INTCNL## ;CONNECT TO INTERRUPT SYSTEM
JUMPF OPEN.2 ;GIVE UP
TXO S,INTRPT ;INDICATE WE'RE CONNECTED
MOVEI S1,%RSUOK ;LOAD THE CODE
$RETT ;RETURN
OPEN.1: SKIPA S1,[%RSUNA] ;UNIT NOT AVAILABLE
OPEN.2: MOVEI S2,%RSUDE ;UNIT WILL NEVER BE AVAILABLE
$RETF ;RETURN
SUBTTL TTYCLS - CLOSE device
; This routine is called to CLOSE the channel. In simple
; drivers which use standard TOPS-10 I/O facilities, this
; is accomplished with a CLOSE or RESDV. UUO.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYCLS
;
; TRUE return: Always
; FALSE return: Never
TTYCLS: PJRST LPTCLS## ;CALL COMMON CLOSE ROUTINE
SUBTTL TTYFLS - Flush a job
; This routine is called whenever a job is to be flushed.
; Most drivers don't need to do anything special and a
; common routine in LPTSPL can be called.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYFLS
;
; TRUE return: Always
; FALSE return: Never
TTYFLS: PJRST LPTFLS## ;CALL COMMON FLUSH ROUTINE
SUBTTL TTYFVU - Load VFU
; This routine is called to load the VFU for a printer.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYVFU
;
; TRUE return: VFU loaded or no VFU needed
; FALSE return: VFU load failed
TTYVFU: CAIE S1,1 ;IS COMMAND "LOAD"?
PJRST VFUVFU## ;NO, DO NOTHING NOW
;HERE COMMAND IS "LOAD VFU". VFUVFU WILL TELL US WHAT PITCH VFU
;IT GOT. IF THE VFU SPECIFIED A PARTICULAR VERTICAL PITCH, HONOR IT
;IF THE PRINTER WE HAVE UNDERSTANDS ANSI (DEC PRIVATE) SEQUENCES.
PUSHJ P,VFUVFU## ;LET THE VFU HANDLER DO IT ALL
SKIPE TTYANS(J) ;IF SIMPLE PRINTER, DON'T SELECT PITCH
CAIN C,356 ;SIMPLE START?
PJRST OUTDMP## ;YES, WE'RE DONE
SETZ S1, ;ASSUME BAD VFU
CAIN C,354 ;6-LPI?
MOVEI S1,"1" ;YES, CODE FOR THAT
CAIN C,355 ;8-LPI?
MOVEI S1,"2" ;YES, CODE FOR THAT
JUMPE S1,OUTDMP## ;I DON'T THINK THIS CAN HAPPEN
PUSH P,S1 ;SAVE THE SELECTION CHAR
MOVEI C,.CHESC ;NOW, TELL THE PRINTER
PUSHJ P,PHSOUT##
MOVEI C,"["
PUSHJ P,PHSOUT##
POP P,C ;THE SELECTION CHAR
PUSHJ P,PHSOUT##
MOVEI C,"z" ;SET VERTICAL PITCH
PUSHJ P,PHSOUT## ;SO
PJRST OUTDMP## ;FORCE OUT THE BUFFERS
SUBTTL TTYRAM - Load RAM
; This routine is called to load the character translation
; RAM for a printer.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYRAM
;
; TRUE return: RAM loaded or no RAM needed
; FALSE return: RAM load failed
TTYRAM: PJRST VFURAM## ;LET THE VFU HANDLER DO IT
SUBTTL TTYLER - File LOOKUP error processing
; This routine is provided for special devices which accumulate
; LPTSPL run log data differently than most.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYLER
;
; TRUE return: Never
; FALSE return: Always
TTYLER: PJRST LPTLER## ;CALL COMMON ERROR ROUTINE
SUBTTL TTYIER - File input error processing
; This routine is provided for special devices which accumulate
; LPTSPL run log data differently than most.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYIER
;
; TRUE return: Never
; FALSE return: Always
TTYIER: PJRST LPTIER## ;CALL COMMON ERROR ROUTINE
SUBTTL TTYOUT - Output a buffer
; This routine is provided for special devices that cannot
; use the conventional output routine (LPTOUT) or must first
; condition the data before doing the output.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYOUT
;
; TRUE return:
; FALSE return:
TTYOUT: PJRST LPTOUT## ;CALL COMMON OUTPUT ROUTINE
SUBTTL TTYOER - Output error processing
; This routine provides for driver or device-specific I/O error
; processing. When called, both S1 and J$LIOS(J) will contain
; the returned I/O error status bits (GETSTS information). No
; attempt will be made to determine the validity or severity of
; any errors. That is left for the driver.
; Call: MOVE S1,J$LIOS(J) ;Justed updated with physical GETSTS
; MOVE S2,J$XIOS(J) ;Just updated with physical DEVOP.
; PUSHJ P,TTYOER
;
; TRUE return: No output error or error recovery sucessful
; FALSE return: Unrecoverable output error
TTYOER: PUSHJ P,VFUOER## ;LET THE VFU HANDLER FIDDLE WITH ERRORS
PJRST LPTOER## ;CALL LPTSPL TO PROCESS
SUBTTL TTYEOX - Output EOF processing
; This routine is called at the end of the job to do special
; EOF processing for the device being used.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYEOX
;
; TRUE return: Always
; FALSE return: Never
TTYEOX: $RETT ;NO SPECIAL PROCESSING
SUBTTL TTYBJB - Begining of job
; This routine is called at the begining of job processing.
; It is used to reset device dependent job parameters such
; as switching back to a default font.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYBJB
;
; TRUE return: Always
; FALSE return: Never
TTYBJB: MOVEI C,.CHCRT ;MAKE SURE (AB)USER DIDN'T
PUSHJ P,PHSOUT## ;LEAVE THE CARRIAGE SOMEPLACE STRANGE
$RETT ;RETURN
SUBTTL TTYEJB - End of job
; This routine is called at the end of job processing.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYEJB
;
; TRUE return: Always
; FALSE return: Never
TTYEJB: $RETT ;RETURN
SUBTTL TTYBFL - Begining of input file
; This routine is called at the begining of input file
; processing. It; is used to reset device dependent file
; parameters such as non-sticky font specs and attributes.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYBFL
;
; TRUE return: Print file
; FALSE return: Do not print file
TTYBFL: $RETT ;RETURN
SUBTTL TTYEFL - End of input file
; This routine is called at the end of input file
; processing.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYEFL
;
; TRUE return: Continue file processing
; FALSE return: Do not print additional copies of file
TTYEFL: $RETT ;RETURN
SUBTTL TTYBAN - Banner initialization
; This routine is called at the start of banner processing.
; It is used to alter the appearance if a banner page. For
; example, a special font or page orientation could be selected
; at this time and it would only affect the printing of the
; banner page.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYBAN
;
; TRUE return: Always
; FALSE return: Never
TTYBAN: $RETT ;RETURN
SUBTTL TTYHDR - Header initialization
; This routine is called at the start of header processing.
; It is used to alter the appearance if a header page. For
; example, a special font or page orientation could be selected
; at this time and it would only affect the printing of the
; header page.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYHDR
;
; TRUE return: Always
; FALSE return: Never
TTYHDR: $RETT ;RETURN
SUBTTL TTYWID - Header width initialization
; This routine is called to initialize the page width for
; header processing. It is needed because page orientation
; (determined by LPTTTY) could affect the width of the page
; hence, the number of characters that may be printed on a
; single line.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYWID
;
; TRUE return: Always
; FALSE return: Never
TTYWID: $RETT ;RETURN
SUBTTL TTYRUL - Ruler processing
; This routine is called to output the ruler lines between jobs.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYRUL
;
; TRUE return: Always
; FALSE return: Never
TTYRUL: PJRST LPTRUL## ;LET COMMON CODE DO IT
SUBTTL TTYSHT - Stream shutdown
; This routine is called when a stream is shutdown, just
; prior to releasing the job data page.
;
; Call: MOVE J, job data base address
; PUSHJ P,TTYSHT
;
; TRUE return: Always
; FALSE return: Never
TTYSHT: PJRST VFUSHT## ;LET THE VFU HANDLER DO IT
SUBTTL TTYSTS - Status message generation
; This routine allows a driver to append device specific data to the
; status update message text which is sent to QUASAR. This text is
; appears on queue listings and SHOW STATUS displays. It appears as
; the second line of request or unit status display. LPTSPL will start
; the text with " Started at ...". The driver may then append useful
; information such as "printed 47 out of 56 pages".
TTYSTS::PJRST LPTSTS## ;CALL COMMON CODE
SUBTTL TTYCHR - File data intercept
; This routine is called for file data only, if the character in C
; is in the break mask pointed to by J$DBRK and the special interpretation
; (graphics) flag is set. (J$FASC .LT. 0) See FILCHR.
;
; Call: MOVE J, job data base address
; MOVE C, break character
; PUSHJ P,TTYCHR
; TRUE return: Break condition handled
; FALSE return: Abort job (eg, error in escape sequence)
TTYCHR: $RETT
SUBTTL TTYCHO - Character translator
; This routine will handle character translation. Called when a character
; is about to be sent to what everyone else thinks is the physical device.
; It simulates a hardware translation RAM.
;
; Call: MOVE J, job data base address
; MOVE C, intercepted character
; PUSHJ P,TTYCHO
; TRUE return: Character translated if necessary, caller to output
; FALSE return: Character processed here, nothing to output
TTYCHO: SKIPE TTYLP2(J) ;DOING SIMULATION?
PJRST VFUCHO## ;THE VFU HANDLER CAN DO IT
$RETT ;LEAVE CHARACTER ALONE
SUBTTL Literal pool
TTYLIT: LIT
TTYEND::!END