Trailing-Edge
-
PDP-10 Archives
-
bb-bt99m-bb
-
boot.mac
There are 59 other files named boot.mac in the archive. Click here to see a list.
UNIVER BTSPRM - PARAMETER FILE FOR DECSYSTEM-10 BOOTSTRAP
SUBTTL D. MASTROVITO /DPM/JAD 31-DEC-87
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
; 1980,1981,1982,1983,1984,1985,1986,1987.
;ALL RIGHTS RESERVED.
;
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
;TRANSFERRED.
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
;AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
;SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
BOOWHO==0 ;WHO EDITED
BOOVER==4 ;MAJOR VERSION NUMBER
BOOMIN==0 ;MINOR VERSION NUMBER
BOOEDT==72 ;EDIT NUMBER
%%BTS==<BYTE(3)BOOWHO(9)BOOVER(6)BOOMIN(18)BOOEDT>
IFDEF .MCRV.,<.VERSION <%%BTS>>
SUBTTL REVISION HISTORY
COMMENT `
Version 1
1 05-Feb-80 Add the /REBOOT switch and support for system sleep.
2 15-Jun-80 Change the default filename for /REBOOT from SYSTEM to
CRASH.
3 05-Jul-80 Change the definitions of APRRST and CLRAPR for the
KS10 to reflect empirical evidence (i.e. make it work)
4 05-Jul-80 After powerup, the KS10 wants a WREBR 0 before the
WREBR to set the EBR. I'm not sure why it's true or
why it works but it fixes the ?PAR ERR's.
5 07-Feb-81 Add the /EDDT switch to be equivalent to /START:401.
Version 2
6 06-Jun-81 Add conditinal assembly for KL paging.
7 01-Oct-81 Fix typo that caused BOOT to give up on a structure
if the first HOME block was bad even if the second one
was OK.
10 01-Oct-81 Make it possible to load the DX20/RP20 microcode with
BOOT and pass the physical address of the loaded
microcode to the monitor when it is started.
11 16-Feb-81 Fix a problem with finding 18 bit DF10s. This fix was
only installed in maintenance versions since DF10s
aren't supported with the next field release of BOOT.
The result is no code change is this source.
12 25-Apr-82 Remove the FTKI10 conditionals and the code that they
surround.
13 19-Aug-82 More of edit 7.
14 08-Mar-83 Can't boot a KS if one of the drives is dual ported.
See MCO 10633.
15 08-Jul-83 Fix a typo introduced by edit 6 which causes MUUO EA to
get printed incorrectly on a trap other than page fail.
16 11-Jul-83 Cause version number to be in .JBVER and the EXE file.
17 22-Nov-83 Be sure to put copyright in a format that is readable
once the '11 gets the .EXB file
Version 3
20 12-Aug-84 Teach BOOT how to do KL-paging on the KS. Also, include
CJA's support for silent switch boot. (Expanded for KL)
Process ^R in GETLIN since it fits in all assemblies.
21 26-Sep-84 Remove FTKLP conditionals. Defend against KLIPAs and KLINIs.
22 31-Oct-84 Merge 702+ and 703 versions together. Add SAVE. UUO to loader.
23 9-Dec-84 Completely rewrite microcode loader. Include in it code to
write .EXB files for KL10s.
24 10-Dec-84 Propagate monitor filespec across monitor/bootstrap reloads
so typing just optional switches and/or CRLF will reload the
old monitor instead of DSK:SYSTEM.EXE[1,4].
25 11-Dec-84 Add code to scan the SDL for structures on which to dump.
Add /FORCE to load from DSKA-DSKZ instead of the SSL or
dump to DSKA-DSKZ instead of the SDL. /FORCE is implied if
either the SSL or SDL is empty on the appropriate operations.
26 13-Dec-84 Preserved ASL entries are now one word per unit.
27 18-Dec-84 Make SSL, ASL, and SDL words contain -LENGTH,,OFFSET to the
desired preserved data.
30 4-Jan-85 Fix filespec defaulting problems for dump operations.
31 21-Jan-85 Prevent DTE reloads by not clobbering the APR.
32 2-Apr-85 Make BOOT work on a KS10. Add BTSPRM universal. Rework
microcode loader to convert files directly into binary.
33 16-Apr-85 Check validity of data page at the start of COPDAT.
34 22-Apr-85 BOOT hangs on KS10 because KLINIK command word left non-zero
by the loader's SAVE. UUO, and the KS10 8080 code is irrational
35 24-Apr-85 KS10s don't like XJRST.
36 25-Apr-85 Add system sleep and page replacement support.
37 01-May-85 Fix up some problems with /REBOOT after system sleep.
BOOT will now reload in place, after checking that enough
core was reserved for it.
40 19-Jul-85 Don't attempt to save/restore the PI system state. The
monitor already does this, and we can lose pending inter-
rupts if we clear the PI system (causing KAF after taking
a dump).
41 15-Aug-85 Do Copyrights./LEO
42 15-Nov-85 Forcibly halt internal channel devices when BOOT is started
(KLNI and KLIPA). Re-arrange the vector so it is easily
expanded without causing monitor/BOOT skews. Preserve
cache strategy from KLI on the KL, and add a word for
saving the cache strategy across reloads/CPU restarts.
Add code from 7.02 MONBTS to save/restore KS UBA mapping
registers around calls to BOOT.
43 25-Nov-85 Fix bug in EXBDAT which would drop a few words at the end
of the .EXB file. Don't create .EXB file for KS BOOT.
Conditionalize the UCODES entries so we don't ask about KL
microcodes on a KS, and vice versa.
44 1-Dec-85 More work to get BOOT to work on the KS. Retrieve code
from 7.02 MONBTS to save UBA status during R11INI and
ditto for RH20 status during R12INI.
45 17-Dec-85 Don't default on system sleep dump function. If can't
dump for some reason just ask where to dump rather than
asking if they want to keep the dump.
46 18-Dec-85 Remove the need for BOOTM by teaching BOOT about magtapes.
(Unsupported) code is under the FTTAPE conditional, which
is OFF in the distributed version.
47 7-Jan-86 Get version number from the "correct" place in .ULD files.
Start of version 3A
50 19-Jun-86 Remove crocks about loading high segments following low
segments and just load into the physical pages specified
by the .EXE directory.
51 18-Nov-86 Save the IA/IVIR registers at R12INI and restore on exit.
Not restoring the registers can lead to UIL stopcodes if
the device interrupts and picks up a zeroed EPT index.
Start of version 4
60 18-Nov-86 Turn on FTTAPE conditional so we can get rid of BOOTM for
the 7.04 release.
61 4-Mar-87 Modify REFMEM to detect memory interleaving errors. This
is in preparation for removing similar code in SYSINI so
the monitor starts up faster.
62 5-Mar-87 Inform the user when the monitor extends into BOOT rather
than just reporting "memory too complex".
63 6-Mar-87 To aid monitor debugging, report the function code on
"Illegal function code" errors.
64 16-Mar-87 Rebuild NXMTAB on RESTART or REBOOT functions. NXMTAB from
the monitor is incorrect, as it is not a table of non-existant
pages, but a table of pages the monitor wants to hide from
itself.
65 6-May-87 Make microcode text more descriptive. Change KLIPA/CI
to CI20 and KLNI/NI to NIA20.
66 8-Jun-87 Fix bug in compare logic that prevented us from ever restarting
a suspended monitor. Must also throw away tape drivers at
this time so we use the adjusted size of bootstrap.
67 28-Jul-87 Fix asking/defaulting of questions to avoid hanging in
automatic dump/reload of monitor. If we can't do the dump,
punt it.
70 4-Aug-87 Fix system sleep to mark the suspended system as a dump.
This way, we won't overwrite it by accident with a useless
STOPCD dump. Requires edit 53 to CRSCPY.
71 28-Dec-87 Use a word in the bootstrap vector to store the software
incarnation level of the host's SCA interface.
72 31-Dec-87 Fix RSTHDW to properly restore the DTE20 status.
`
SUBTTL MICROCODE STORAGE DEFINITIONS
; THIS MACRO DEFINES THE MICROCODE STORAGE DATA BASE FOR BOOT. DUMMY
; ENTRIES IN THE MACRO ALLOW UPWARD AND DOWNWARD COMPATIBILTY BETWEEN
; VERSIONS OF THE MONITOR AND BOOT. AS NEW MICROCODES ARE ADDED, THE
; DUMMY ENTRIES ; SHOULD BE REMOVED. DUMMY ENTRIES RESERVED FOR DEC
; ARE LABELED 'DEC'. THOSE FOR CUSTOMERS ARE LABELED 'CST'. ALSO, WHEN
; ADDING NEW MICROCODES, MAKE SURE THE DESCRIPTIVE TEXT IS PADDED OUT TO
; THE FULL 19 CHARACTERS. THIS IS USED BY THE MICROCODE LOADER IN BOOT
; AND MAKES FOR A PRETTY DISPLAY.
DEFINE UCODES,<
;; L,PFX, NAME ,EXT,DESCRIPTIVE TEXT , MODE ,MAXIMUM-SIZE
X (FTKL10,TX1,DXMPA ,A8 ,<DX10/TX01 microcode>,.IOASC,<10000/3>)
X (FTKL10,TX2,DXMCA ,ADX,<DX20/TX02 microcode>,.IOASC,<2000+400+^D32+1>)
X (FTKL10,RP2,DXMCD ,ADX,<DX20/RP20 microcode>,.IOASC,<2000+400+^D32+1>)
X (FTKL10,KLP,KLPCOD,ULD,<CI20 microcode >,.IOASC,<<10000*^D60+^D35>/^D36>)
X (FTKL10,KNI,KNICOD,ULD,<NIA20 microcode >,.IOASC,<<10000*^D60+^D35>/^D36>)
X (0,UNA,DEUCOD,ULD,<DEUNA/NI microcode >,.IOASC,<<10000*^D60+^D35>/^D36>)
X (0, ,DUMMY ,DEC,<0>)
X (0, ,DUMMY ,DEC,<0>)
X (0, ,DUMMY ,DEC,<0>)
X (0, ,DUMMY ,DEC,<0>)
X (0, ,DUMMY ,DEC,<0>)
X (0, ,DUMMY ,CST,<0>)
X (0, ,DUMMY ,CST,<0>)
>
DEFINE X (L,PFX,NAM,EXT,TXT,MOD,SIZ),<
IFNB <PFX>,<.BT'PFX==ZZ>
ZZ==ZZ+2
IFL ZZZ-<SIZ>,<ZZZ==SIZ>
>
ZZZ==<ZZ==0>
UCODES
UCDNUM==ZZ_-1
UCDSIZ==ZZZ
PURGE ZZ,ZZZ
SUBTTL ENTRY VECTOR
; THIS IS THE ACTUAL BOOTSTRAP ENTRY VECTOR. NOTE THAT THE
; MICROCODE OFFSET DEFINITIONS (FROM THE UCODES MACRO) INDEX
; INTO A STATIC BLOCK INSIDE THE VECTOR RATHER THAN BEING ABSOLUTE
; OFFSETS INTO THE VECTOR ITSELF. THIS ALLOWS FOR SKEWS BETWEEN
; THE MONITOR AND BOOT WHEN NEW MICROCODES ARE ADDED.
.ORG 0
.BTVEC:! ;START OF VECTOR
.BTNAM:! BLOCK 1 ;SIXBIT /BOOT/
.BTSIZ:! BLOCK 1 ;XWD -SIZE IN PAGES, SIZE IN WORDS
.BTVER:! BLOCK 1 ;BOOT VERSION
.BTSTA:! BLOCK 1 ;BOOT START ADDRESS
.BTDDT:! BLOCK 1 ;DDT START ADDRESS
.BTBPT:! BLOCK 1 ;UNSOLICITED BREAKPOINT ADDRESS
.BTSYM:! BLOCK 2 ;POINTER TO SYMBOL TABLES
.BTFLG:! BLOCK 1 ;FLAGS
.BTFNC:! BLOCK 1 ;SUBROUTINE FUNCTION CODE
.BTDAT:! BLOCK 1 ;SUBROUTINE OFFSET TO DATA STORAGE
.BTDSP:! BLOCK 1 ;SUBROUTINE DISPATCH OFFSET
.BTXPC:! BLOCK 4 ;SUBROUTINE XPCW ENTRY POINT
.BTACS:! BLOCK 2 ;SUBROUTINE STORAGE FOR CALLER'S ACS 16 AND 17
.BTUCD:! BLOCK UCDNUM*2 ;MICROCODE STORAGE POINTERS (TWO WORD PAIRS)
.BTMSZ:! BLOCK 1 ;OFFSET TO SIZE OF MEMORY IN P
.BTNXM:! BLOCK 1 ;-LENGTH,,OFFSET TO NXMTAB
.BTCPN:! BLOCK 1 ;CPU NUMBER OF CPU INVOKING BOOT
.BTCUS:! BLOCK 4 ;4 WORDS FOR CUSTOMER USE
.BTSIN:! BLOCK 1 ;SCA SOFTWARE INCARNATION NUMBER
;*** ADD NEW NON-PRESERVED VARIABLES HERE ***
.ORG 100 ;LEAVE SOME ROOM FOR FUTURE EXPANSION
.BTSVB:! ;BEGINING OF PRESERVED DATA
.BTSAV:! BLOCK 1 ;NUMBER OF PRESERVED WORDS
.BTDEV:! BLOCK 1 ;DEVICE
.BTFIL:! BLOCK 1 ;FILE NAME
.BTEXT:! BLOCK 1 ;EXTENSION
.BTPTH:! BLOCK 7 ;PATH (PLUS ZERO TERMINATING WORD)
.BTSSL:! BLOCK 1 ;-LENGTH,,OFFSET TO SSL
BLOCK ^D36 ;SYSTEM SEARCH LIST
.BTASL:! BLOCK 1 ;-LENGTH,,OFFSET TO ASL
BLOCK ^D8 ;ACTIVE SWAPPING LIST
.BTSDL:! BLOCK 1 ;-LENGTH,,OFFSET TO SDL
BLOCK ^D36 ;SYSTEM DUMP LIST
.BTSCS:! BLOCK 1 ;SAVED CACHE STRATEGY (KL)
;*** ADD NEW PRESERVED VARIABLES HERE ***
.BTSVE:! ;END OF PRESERVED DATA
.BTVCE:! ;END OF VECTOR
.BTVLN==<.BTVCE+777>_-11 ;LENGTH OF VECTOR IN PAGES
.ORG
PRGEND
TITLE BOOT - DECSYSTEM-10 BOOTSTRAP
SUBTTL G.M. UHLER/GMU/DPM 04-AUG-87
SEARCH BTSPRM
SEARCH JOBDAT
SEARCH UUOSYM
SALL
.DIRECTIVE FLBLST
IFNDEF FTKL10,<FTKL10==-1>
IFNDEF FTKS10,<FTKS10==0>
IFNDEF FTTAPE,<FTTAPE==-1> ;INCLUDE BOOTM EMULATION IF NON-ZERO
IF1,<
IFN FTKL10,<PRINTX [Assembling BOOT for a KL10]>
IFN FTKS10,<PRINTX [Assembling BOOT for a KS10]>
>
LOC .JBVER
EXP %%BTS
RELOC
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1980,1987. ALL RIGHTS RESERVED.
\;END OF COPYRIGHT MACRO
;THE "\|"s BELOW ARE BECAUSE THE IRPC IN ASCI11 CAN'T DEAL WITH<CR>(!)
DEFINE CPYTXT,<ASCI11 <\|COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1980,1987.\|ALL RIGHTS RESERVED.\|>>
SUBTTL MEMORY USAGE
; SYMBOL CONTENTS ADDRESS
;
; LOADER +====================================+ 140
; | MICROCODE LOADER |
; LOADEN +------------------------------------+
; | UNUSED CORE |
; BTSVEC +------------------------------------+ 700000
; | ENTRY VECTOR PAGE(S) |
; | (PAGE ALIGNED) |
; EPT +------------------------------------+
; | EPT/UPT/SECTION 0 MAP |
; DATA +------------------------------------+
; | IMPURE DATA STORAGE |
; BOOT +------------------------------------+
; | BOOTSTRAP |
; EDDT +------------------------------------+
; | EXEC DDT |
; DDTEND +------------------------------------+
; | PATCH SPACE |
; +------------------------------------+
; | SYMBOL TABLE |
; +------------------------------------+
; | MICROCODE STORAGE |
; +------------------------------------+
; | UNUSED CORE |
; +====================================+ 777777
SUBTTL FEATURE TEST NORMALIZATION
;MAKE SURE FEATURE TESTS AREN'T SCREWED
IFE FTTAPE,< ;IF NO TAPE DRIVER CODE
FTDX10==0 ;NO DX10/TU70
FTTM02==0 ;NO TM02/RH10/RH11/RH20
FTDX20==0 ;NO DX20/TU72
FTTM78==0 ;NO TM78
>; END IFE FTTAPE
IFN FTTAPE,< ;IF TAPE DRIVER CODE
IFN FTKL10,< ;FOR A KL10
IFNDEF FTDX10,<FTDX10==-1> ;DX10/TU70 BY DEFAULT
IFNDEF FTTM02,<FTTM02==-1> ;TM02/RH10/RH20 BY DEFAULT
IFNDEF FTDX20,<FTDX20==-1> ;DX20/TU72 BY DEFAULT
IFNDEF FTTM78,<FTTM78==-1> ;TM78 BY DEFAULT
>; END IFN FTKL10
IFN FTKS10,< ;FOR A KS10
IFNDEF FTTM02,<FTTM02==-1> ;TM02/RH11 BY DEFAULT
FTDX10==0 ;THE REST STAY OFF
FTDX20==0 ;...
FTTM78==0
>; END IFN FTKS10
IF1,<
IFN FTDX10,<PRINTX [Including DX10/TX01 driver]>
IFN FTTM02,<PRINTX [Including TM02 driver]>
IFN FTDX20,<PRINTX [Including DX20/TX02 driver]>
IFN FTTM78,<PRINTX [Including TM78 driver]>
>; END IF1
>; END IFN FTTAPE
SUBTTL AC DEFINITIONS
S=0 ;FLAGS
P=1 ;PUSH DOWN POINTER
T1=2 ;FOUR
T2=T1+1 ; TEMPORARY
T3=T2+1 ; ACS
T4=T3+1 ; ...
W=6 ;OFFSET INTO THE TYPE TABLE (RH10, RH20, RH11, ETC.)
M=7 ;NUMBER OF BLOCKS TO TRANSFER
U=10 ;PHYSICAL UNIT NUMBER
P1=11 ;FOUR
P2=P1+1 ; PRESERVED
P3=P2+1 ; ACS
P4=P3+1 ; ...
J=15 ;INDEX INTO DEVICE CODE TABLE
F=16 ;LOGICAL BLOCK ON UNIT OF FIRST BLOCK TO TRANSFER
R=17 ;RELOCATION REGISTER OR ADDRESS OF START OF TRANSFER
SUBTTL FLAG DEFINITIONS
;FLAGS IN S. NOTE THAT THE FR.XXX FLAGS MUST BE IN THE SAME ORDER
;AS SWTTAB SINCE THE OFFSET INTO SWTTAB IS USED TO SET THE BIT IN S.
FL.RUB==1B0 ;CURRENTLY PROCESSING RUBOUT
FL.OVW==1B1 ;IGNORE UNPROCESSED DUMPS
FL.WLD==1B2 ;DEVICE IS WILD
FL.RIB==1B3 ;SKIP 1 BLOCK IN SELBLK SO THAT WE SKIP THE RIB
FL.NOP==1B4 ;SCHED 400 IN EFFECT
FL.EXR==1B5 ;READING IN AN EXTENDED RIB
FL.IO==1B6 ;1 IF DOING OUTPUT, 0 IF DOING INPUT
FL.DEF==1B7 ;DON'T DEFAULT ANY ANSWERS IN REDLIN
FL.CMD==1B8 ;PARSE COMMANDS FROM COMMAND BUFFER
FL.1CM==1B9 ;PARSE JUST NEXT COMMAND FROM COMMAND BUFFER
FL.LDE==1B10 ;ERROR BEING PROCESSED WAS FROM LOAD, NOT DUMP
FL.SDT==1B11 ;SUCCESSFUL DUMP TAKEN
FL.SSD==1B12 ;THIS DUMP IS FOR A SYSTEM SLEEP
FL.DDD==1B13 ;DON'T DO DUMP (DEBUGF HAS DF.RAD LIT)
FL.FFL==1B14 ;FOUND FILE IN FNDFIL
;*** BIT 15 FREE
IFN FTTAPE,<
FL.EXS==1B16 ;EXTENSION SEEN
FL.REW==1B17 ;REWIND IN PROGRESS
>; END IFN FTTAPE
FR.DEV==1B18 ;DEVICE SEEN
FR.FIL==1B19 ;FILENAME SEEN
FR.EXT==1B20 ;EXTENSION SEEN
FR.PTH==1B21 ;PATH SEEN
FR.1ST==1B35 ;RIGHT-MOST BIT OF SWITCH BITS. SHIFT THIS BIT BY THE
; OFFSET INTO SWTTAB TO SET THE APPROPRIATE SWITCH BIT
;DEFINE SWITCH BITS
DEFINE SWBIT(NAM),<
FR.'NAM==ZZ
FR.SWT==FR.SWT!FR.'NAM
ZZ==ZZ_1
>; END SWBIT
ZZ==FR.1ST ;START AT FIRST BIT
FR.SWT==0 ;NO BITS SET YET
SWBIT (STA) ;/START:N SEEN
SWBIT (DDT) ;/EDDT SEEN
SWBIT (LOD) ;/LOAD SEEN
SWBIT (DMP) ;/DUMP SEEN
SWBIT (RBT) ;/REBOOT SEEN
SWBIT (FRC) ;/FORCE SEEN
IFN FTTAPE,<
SWBIT (REW) ;/REWIND SEEN
SWBIT (SKP) ;/SKIP SEEN
SWBIT (NOR) ;/NOREWIND SEEN
>; END IFN FTTAPE
IFN FTTAPE,<
FR.TAB==FR.REW!FR.SKP
;TAPE ACTION BITS
FR.TSB==FR.REW!FR.SKP!FR.NOR
;TAPE-SPECIFIC BITS
>; END IFN FTTAPE
FR.ALL==FR.DEV!FR.FIL!FR.EXT!FR.SWT
;ALL PARSE BITS
FX.CLR==FL.RUB!FL.OVW!FL.WLD!FL.SDT!FR.ALL
;BITS TO CLEAR ON ENTRY TO PARSE
SUBTTL PARAMETER DEFINITIONS
;MONITOR PARAMETERS WHICH MUST AGREE WITH COMMON/COMMOD.
;
;HOME BLOCK DEFINITIONS
HOMNAM==0 ;SIXBIT/HOM/
HOMSNM==4 ;SIXBIT STRUCTURE NAME
HOMLUN==10 ;LOGICAL UNIT NUMBER WITHIN FILE STRUCTURE
HOMBSC==14 ;BLOCKS PER SUPERCLUSTER
HOMSCU==15 ;SUPER CLUSTERS PER UNIT
HOMCNP==16 ;BYTE POINTER TO CLUSTER COUNT IN RETRIEVAL PTR
HOMCLP==20 ;BYTE POINTER TO CLUSTER ADDRESS IN RET. PTR
HOMBPC==21 ;BLOCKS PER CLUSTER
HOMREF==23 ;NON-ZERO IF STRUCTURE NEEDS REFRESHING
HOMMFD==46 ;LOGICAL BLOCK NUMBER IN STR OF RIB FOR MFD
HOMCOD==176 ;CONTAINS UNLIKELY CODE
CODHOM==707070 ;THE CODE
HOMSLF==177 ;SELF BLOCK POINTER
;RIB DEFINITIONS
RIBFIR==0 ;AOBJN POINTER TO FIRST RETRIVAL POINTER IN RIB
RIBPPN==1 ;PPN OF FILE
RIBNAM==2 ;SIXBIT FILENAME
RIBEXT==3 ;SIXBIT EXTENSION
RIBSIZ==5 ;SIZE OF FILE IN WORDS
RIBSTS==17 ;STATUS BITS
RIPDMP==100000 ;THIS FILE CONTAINS AN UNPROCESSED DUMP
RIBXRA==34 ;POINTER TO NEXT EXTENDED RIB
RIPNUB==400000 ;NEW UNIT POINTER IN RETRIEVAL POINTER
RIBCOD==176 ;CONTAINS UNLIKELY CODE
CODRIB==777777 ;THE CODE
RIBSLF==177 ;SELF BLOCK POINTER
;MICROCODE LOADER DEFINITIONS
EXBBYT==20000 ;MAXIMUM NUMBER OF BYTES IN AN EXB FILE RECORD
;(ABSOLUTE MAXIMUM IS 777777)
EXBMAX==<EXBBYT/4>-<EXBBYT/8> ;CORRESPONDING NUMBER OF PDP-10 WORDS
EXBWDS==EXBBYT/4 ;SIZE OF EXB RECORD BUFFER
QWDS==6 ;NUMBER OF WORDS IN THE QUESTION BUFFER
IOC==1 ;I/O CHANNEL
;SYMBOLIC CHARACTER DEFINITIONS
.CHNUL==000 ;NUL
.CHCNC==003 ;CONTROL C
.CHCND==004 ;CONTROL D
.CHBEL==007 ;BELL
.CHCNH==010 ;BACKSPACE
.CHTAB==011 ;TAB
.CHLFD==012 ;LINE-FEED
.CHVTB==013 ;VERTICAL TAB
.CHFFD==014 ;FORM FEED
.CHCRT==015 ;CARRIAGE RETURN
.CHCNR==022 ;CONTROL R
.CHCNU==025 ;CONTROL U
.CHCNZ==032 ;CONTROL Z
.CHESC==033 ;ESCAPE
.CHDEL==177 ;DELETE
;MISCELANEOUS DEFINITIONS
BOOTSA==20 ;PHYSICAL ADDRESS OF BOOT ORIGIN STORED HERE
BOOTWD==22 ;RH10/DF10 CHANNEL COMMAND PAIR
SYSDDT==401 ;EDDT MONITOR START ADDRESS
LBNHOM==1 ;BLOCK ADDRESS OF FIRST HOME BLOCK
LB2HOM==12 ;BLOCK ADDRESS OF SECOND HOME BLOCK
LBOBAT==1 ;OFFSET OF BAT BLOCK FROM HOME BLOCK
LIMLVL==5 ;NUMBER OF SFD'S
MBTCOM==411 ;COMMUNICATIONS WORD IN LOW CORE FOR REBOOT
;REQUESTS. CONTAINS THE PHYSICAL PAGE NUMBER
;OF WHERE TO PUT BOOT DURING REBOOT PROCESSING
MAXPGS==<FTKL10&^D8192>!<FTKS10&^D1024>
;MAXIMUM NUMBER OF PAGES POSSIBLE IN MEMORY
MEMITL==^D4 ;NUMBER OF WAYS MEMORY CAN BE INTERLEAVED
NXMLEN==<MAXPGS/^D36>+1 ;LENGTH OF NXMTAB
; DEVICE CODES
APR==0 ;PROCESSOR
PI==4 ;PI SYSTEM
PAG==10 ;PAGER
CCA==14 ;CACHE
DTE0==200 ;DTE20
; CONI APR BITS
LP.SBE==1B24 ;S-BUSS ERROR
LP.NXM==1B25 ;NXM
LP.PAR==1B27 ;PARITY ERROR
LP.CSD==1B31 ;CACHE SWEEP DONE
; CONO APR (KS10)
SP.SSF==1B23 ;SET SELECTED FLAGS (BITS 24-31)
SP.IFE==1B25 ;INTERRUPT FRONT END
SP.NXM==1B27 ;NXM
SP.HMP==1B28 ;HARD MEMORY PARITY ERROR
; CONO PI BITS
PI.CPI==1B23 ;CLEAR PI SYSTEM
PI.OFF==1B27 ;TURN PI SYSTEM OFF
; CONO PAG BITS (KL10)
LG.CSL==1B18 ;CACHE STRATEGY LOOK
LG.CSW==1B19 ;CACHE STRATEGY WRITE (LOAD)
XG.KLP==1B21 ;KL PAGING
XG.TEN==1B22 ;TRAP ENABLE
LG.EPT==17777 ;ADDRESS OF EPT (KL10)
SG.EPT==3777B35 ;ADDRESS OF EPT (KS10)
; DATAO PAG BITS (KL10)
XG.LAB==1B0 ;LOAD AC BLOCKS
LG.LPC==1B1 ;LOAD PREV CONTEXT (KL10)
XG.LUB==1B2 ;LOAD USER BASE REGISTER
LG.IAM==1B18 ;INHIBIT STORING ACCOUNTING METER (KL10)
; KS10 I/O INSTRUCTIONS FOR WHICH THERE ARE NO REASONABLE
; KL10 EQUIVALENTS
OPDEF RDHSB [702300,,0] ;READ HALT STATUS BLOCK ADDRESS
OPDEF WRHSB [702700,,0] ;WRITE HALT STATUS BLOCK ADDRESS
OPDEF TIOE [710000,,0] ;TEST UNIBUS, SKIP EQUAL
OPDEF TION [711000,,0] ;TEST UNIBUS, SKIP NOT EQUAL
OPDEF RDIO [712000,,0] ;READ I/O
OPDEF WRIO [713000,,0] ;WRITE I/O
OPDEF WRIOB [723000,,0] ;WRITE I/O BYTE
OPDEF WRCSB [702440,,0] ;WRITE CST BASE REGISTER
; KL10/DTE FUNCTION FLAGS
DT.MTO==10B27 ;CTY OUTPUT
DT.ESP==11B27 ;ENTER SECONDARY PROTOCOL
; KL10/DTE COMMUNICATION WORDS IN THE EPT
DTEEPW==144 ;EXAMINE/PROTECTION WORD
DTEFLG==444 ;COMMAND COMPLETE FLAG
DTEF11==450 ;FROM -11 DATA
DTECMD==451 ;COMMAND WORD
DTEMTD==455 ;OUTPUT DONE FLAG
DTEMTI==456 ;INPUT READY FLAG
; KL10/DTE CONO BITS
TO11DB==1B22 ;TO -11 DOOR BELL
PILDEN==1B31 ;ENABLE LOADING PIA
PI0ENB==1B32 ;PI0 ENABLE
PIA==7B35 ;PIA
; FLAGS FROM KLI PASSED IN AC 0 (S)
KL.SIL==1B0 ;SILENT LOAD
KL.DMP==1B1 ;DUMP
; KS10 RELOAD WORD
RLWORD==31 ;RELOAD WORD
AUTOBT==1B32 ;BOOT SWITCH OR POWER UP CONDITION
FORREL==1B34 ;FORCED RELOAD
; KS10 CTY PARAMETERS
CTYIWD==32 ;INPUT WORD
CTYOWD==33 ;OUTPUT WORD
CTYOVL==1B27 ;OUTPUT VALID FLAG
; KS10 KLINIK LINE PARAMETERS
KLIIWD==34 ;KLINIK INPUT WORD
KLIOWD==35 ;KLINIK OUTPUT WORD
KLIOVL==1B27 ;KLINIK OUTPUT VALID
; INSTRUCTION OPDEFS
OPDEF XMOVEI [SETMI 0,] ;EXTENDED MOVE IMMEDIATE
OPDEF XJRST [JRST 15,] ;JRST AND SWITCH SECTIONS
OPDEF APRID [BLKI APR,] ;READ PROCESSOR SERIAL NUMBER
OPDEF RDERA [BLKI PI,] ;READ ERROR ADDRESS REGISTER
OPDEF CLRPT [BLKO PAG,] ;CLEAR ONE ENTRY IN HARDWARE
OPDEF SWPUA [DATAO CCA,] ;UNLOAD ALL PAGES, UPDATING
; CORE AND INVALIDATING CACHE
OPDEF PJRST [JUMPA 17,] ;PUSHJ/POPJ
; PAGE FAIL OFFSETS
.LMPFW==500 ;PAGE FAIL WORD
.LMPFP==501 ;OLD PC WORD
.LMPFN==502 ;NEW PC WORD
; MUUO TRAP OFFSETS
.UPMUO==424 ;LOCATION OF MUUO
.UPMUP==425 ;LOCATION OF MUUO PC
.UPMUE==426 ;MUUO EFFECTIVE ADDRESS
;MISCELANEOUS HARDWARE PARAMETERS
APRRST==<FTKL10&327760>!<FTKS10&221700>
;CONO BITS TO CLEAR THE WORLD
CLRAPR==<FTKL10&127700>!<FTKS10&021700>
;CONO BITS TO CLEAR APR ERROR FLAGS
ASNMSK==<IFN FTKL10,<7777>>!<IFN FTKS10,<77777>>
;MASK OF APR SERIAL NUMBER RETURNED BY APRID
IFN FTKS10,<.EPHSB==424>;KS10 HALT STATUS BLOCK ADDRESS
SV.DIR==1776 ;.EXE DIRECTORY START CODE
SV.END==1777 ;.EXE DIRECTORY END CODE
; KL PAGING PAGE MAP BITS
PM.DCD==1 ;DIRECT POINTER
PM.WRT==1B4 ;WRITABLE PAGE
;MISCELANEOUS PARAMETERS
PDLLEN==^D36 ;SIZE OF PDL
LINBFL==^D16 ;SIZE OF COMMAND LINE BUFFER IN WORDS
BLKSIZ==200 ;SIZE OF A DISK BLOCK
PAGSIZ==1000 ;SIZE OF A PAGE
MAXUNI==^D8 ;MAX NUMBER OF UNITS ON A CONTROLLER
P2BLSH==2 ;AMOUNT TO LSH A PAGE COUNT TO GET BLOCKS
B2WLSH==^D7 ;AMOUNT TO LSH A BLOCK COUNT TO GET WORDS
W2BLSH==-B2WLSH ;AMOUNT TO LSH A WORD COUNT TO GET BLOCKS
P2WLSH==^D9 ;AMOUNT TO LSH A PAGE NUMBER TO GET WORDS
W2PLSH==-P2WLSH ;AMOUNT TO LSH A WORD COUNT TO GET PAGES
WATTIM==<FTKL10&50>+<FTKS10&10>
;TIME TO WAIT FOR OPERATOR RESPONSE IN REDLIN
DATLEN==20 ;WORDS OF SUBROUTINE DATA STORAGE
IFN FTTAPE,<
ERRTRY==^D40 ;NUMBER OF TIMES TO RETRY ON A TAPE ERROR
>; END IFN FTTAPE
;DEVICE(DRIVE) TYPES
TY.T2L==10 ;LOWEST TM02 TYPE
TY.T2H==17 ;HIGHEST TM02 TYPE
TY.T3L==50 ;LOWEST TM03 TYPE
TY.T3H==57 ;HIGHEST TM03 TYPE
TY.DXA==60 ;DX20A (TX02 TAPE CONTROLLER)
TY.T78==101 ;TM78
;DEFINITIONS FOR BACKUP FORMAT MAGTAPES (STOLEN FROM BACKRS)
IFN FTTAPE,<
;WORDS IN HEADER (FIRST 32. WORDS OF EACH RECORD)
G$TYPE==0 ;RECORD TYPE
T$LBL==1 ;LABEL IDENTIFICATION RECORD
T$BEG==2 ;SAVE START
T$END==3 ;SAVE END
T$FIL==4 ;DISK FILE DATA
T$UFD==5 ;UFD RIB
T$EOV==6 ;END OF VOLUME
T$COM==7 ;COMMENT
T$CON==10 ;CONTINUE (SAME DATA AS T$BEG-T$END)
T$MAX==T$CON ;MAXIMUM RECORD TYPE
G$SEQ==1 ;SEQUENCE NUMBER
G$RTNM==2 ;RELATIVE TAPE NUMBER
G$FLAG==3 ;RECORD DEPENDENT BITS
GF$EOF==1B0 ;LAST RECORD OF FILE
GF$RPT==1B1 ;REPEAT OF LAST RECORD WRITE ERROR
GF$NCH==1B2 ;IGNORE CHECKSUM
GF$SOF==1B3 ;START OF FILE
G$CHK==4 ;CHECKSUM
G$SIZ==5 ;NUMBER OF DATA WORDS
G$LND==6 ;TOTAL LENGTH OF NON-DATA SECTION
;SUB-BLOCK CODES FOR FILE NAME BLOCK IN A T$FIL RECORD
.FCDEV==1 ;DEVICE
.FCNAM==2 ;FILE NAME
.FCEXT==3 ;EXTENSION
.FCDIR==40 ;DIRECTORY (PPN), SFD'S ARE 41-45
;RECORD SIZE
MTHLEN==^D32 ;LENGTH OF MAGTAPE HEADER RECORD
LNMTBF==PAGSIZ+MTHLEN ;LENGTH OF TAPE BUFFER (HEADER PLUS DATA AREA)
>; END IFN FTTAPE
;DEFINITIONS FOR THE .VBOOT VIRTUAL ADDRESS SPACE. WITH KL PAGING,
;THE MAP SLOT ASSIGNMENTS ARE ALL DIFFERENT AND WE PUT THE ADDRESS
;SPACE INTO THE LOW SEGMENT TO AVOID CONFLICTS WITH THE RH20 IOWDS.
.VBOOT==700000 ;VIRTUAL ADDRESS AT WHICH BOOT RUNS
.VPAG0==302000 ;PAGE 0 MAPPED THROUGH THIS VIRUAL ADDRESS
;PAGE 1 MAPPED THROUGH .VPAG0+PAGSIZ
.VMOVE==304000 ;FIRST VIRTUAL ADDRESS USED TO MOVE BOOT TO
; HIGH CORE
.VVECT==306000 ;VIRTUAL ADDRESS OF OLD BOOT VECTOR
.VZERO==300000 ;VIRTUAL ADDRESS USED TO ZERO CORE
;MACRO TO COMPUTE THE MAP SLOT OFFSET FOR A GIVEN VIRTUAL ADDRESS
DEFINE VMAP(SYMBOL,ADDR),<
SYMBOL==<ADDR/PAGSIZ>
>
VMAP(.MBOOT,.VBOOT) ;MAPPED BOOT ORIGIN
VMAP(.MPAG0,.VPAG0) ;MAPPED PHYSICAL PAGE 0
;MAPPED PHYSICAL PAGE 1 IS AT .VPAG0+PAGSIZ
VMAP(.MMOVE,.VMOVE) ;MAPPED PAGE FOR MOVING BOOT
VMAP(.MZERO,.VZERO) ;MAPPED PAGE FOR ZEROING CORE
VMAP(.MVECT,.VVECT) ;MAPPED BOOT VECTOR OF PREVIOUS BOOT
IFN FTKL10,<
;INTERNAL CHANNEL DEVICE DEPENDENT PARAMETERS
FSTICD==540 ;FIRST INTERNAL CHANNEL DEVICE CODE
LSTICD==574 ;LAST INTERNAL CHANNEL DEVICE CODE
;CI20/NIA20 DEVICE DEPENDENT PARAMETERS
;CONO BITS
CO.CPT==400000 ;CLEAR PORT
;RH10/RH20 DEVICE DEPENDENT PARAMETERS
;CONI BITS
CI.XDN==10 ;TRANSFER DONE (RH10/RH20)
CI.122==4000,,0 ;22 BIT CHANNEL (RH10/DF10C)
CI.1ER==736320 ;DBPE, FXCEP, CHNER, OVR, DRE, ILC, PSFAIL,
;CBOV, RAE, BUSY (RH10)
CI.1RA==100 ;RAE (RH10)
CI.2ER==515000 ;DPE, LWCE, DR, RAE, DOE (RH20)
CI.2RA==4000 ;RAE (RH20)
;CONO BITS
CO.XDN==10 ;CLEAR DONE (RH10/RH20)
CO.XSX==20 ;STOP TRANSFER (RH10/RH20)
CO.XMI==2000 ;MASSBUS INIT (RH10/RH20)
CO.1RB==47 ;CONI BITS TO RESTORE - AIE, PIA (RH10)
CO.1AE==40 ;AIE (RH10)
CO.2RB==447 ;CONI BITS TO RESTORE - MBE, AIE, PIA (RH20)
CO.2ME==400 ;MASSBUS ENABLE (RH20)
;DATAI/DATAO BITS
DO.LDR==004000,,0 ;LOAD REGISTER (REGISTER NUMBER IN BITS 0-5)
DO.XCR==004400,,0 ;DRIVE CONTROL REGISTER (RH10/RH20)
DO.XSR==010400,,0 ;STATUS REGISTER (RH10/RH20)
DI.XCE==40000 ;COMPOSITE ERROR (RH10/RH20)
DI.XSM==172777 ;BIT MASK OF BITS TO CHECK FOR IN INITIALIZATION
DI.XSB==10700 ;LEGAL VALUE IN SR (MOL, DP, DR, VV)
DO.XDS==054000,,0 ;BLOCK ADDRESS REGISTER, LR (RH10/RH20)
DO.XDT==060000,,0 ;DRIVE TYPE REGISTER (RH10/RH20)
DO.XDC==124000,,0 ;DESIRED CYLINDER REGISTER, LR (RH10/RH20)
DO.1CR==404000,,0 ;CONTROL REGISTER (RH10)
DO.1IA==440000,,0 ;INTERRUPT ADDRESS REGISTER (RH10)
DO.2ST==716200,,0 ;STCR, LR, RCLP, STORE (RH20)
DO.XCL==11 ;FUNCTION CODE FOR DRIVE CLEAR (RH10/RH20)
DO.XRP==21 ;FUNCTION CODE FOR READIN PRESET (RH10/RH20)
DO.XRD==71 ;FUNCTION CODE FOR READ (RH10/RH20)
DO.XWT==61 ;FUNCTION CODE FOR WRITE (RH10/RH20)
DO.2IV==740000,,0 ;INTERRUPT VECTOR INDEX REGISTER (RH20)
;MISCELANEOUS
RH2TRA==1B0 ;CHANNEL COMMAND OPCODE FOR TRANSFER (RH20)
RH2JMP==1B1 ;CHANNEL COMMAND OPCODE FOR JUMP (RH20)
R2IOWL==^D66 ;NUMBER OF IOWDS TO ALLOCATE FOR THE LARGEST
;POSSIBLE TRANSFER
R2BCNT==^D15 ;MAX NUMBER OF BLOCKS WHICH MAY BE SPECIFIED
;IN ONE IOWD FOR AN RH20
R2WCNT==R2BCNT*BLKSIZ ;CORRESPONDING WORDCOUNT
R1BCNT==^D127 ;MAX NUMBER OF BLOCKS WHICH MAY BE SPECIFIED
;IN ONE IOWD FOR AN RH10
R1WCNT==R1BCNT*BLKSIZ ;CORRESPONDING WORDCOUNT
>; END IFN FTKL10
IFN FTKS10,<
;RH11 DEVICE DEPENDENT PARAMETERS
;UBA ADDRESSES/BITS
SO.UPR==763000 ;UBA PAGING RAM ADDRESS
SO.VFT==140000 ;VALID+FAST XFER
SO.RBT==100,,277 ;BITS TO RESTORE IN CS1 AND UBA SR
SO.USR==763100 ;UBA STATUS REGISTER
SO.UBI==100 ;UNIBUS INIT
SI.UER==740000 ;TIME OUT, BMD, BUS PAR, NXD
;DRIVE ADDRESSES/BITS
SO.CS1==776700 ;CONTROL STATUS REGISTER 1
SI.RDY==200 ;READY AT END OF XFER
SI.S1E==140000 ;SC, TRE
SO.WC==776702 ;WORD COUNT REGISTER
SO.BA==776704 ;BUS ADDRESS REGISTER
SO.DA==776706 ;DESIRED ADDRESS REGISTER
SO.CS2==776710 ;CONTROL STATUS REGISTER 2
SO.DS==776712 ;DRIVE STATUS REGISTER
SO.DSM==172700 ;MASK FOR BITS RETURNED
SO.DSB==10700 ;LEGAL VALUE (MOL, DP, DR, VV)
SO.ASR==776716 ;ATTENTION SUMMARY REGISTER
SI.DT==776726 ;DRIVE TYPE REGISTER
SI.DSK==20000 ;DEVICE IS A DISK
SO.DC==776734 ;DESIRED CYLINDER REGISTER
;MISCELLANEOUS
SO.DCL==11 ;FUNCTION CODE FOR DRIVE CLEAR
SO.RIP==21 ;FUNCTION CODE FOR READIN PRESET
SO.WRT==61 ;FUNCTION CODE FOR WRITE
SO.RED==71 ;FUNCTION CODE FOR READ
RSBCNT==^D252 ;MAX NUMBER OF BLOCKS WHICH MAY BE TRANSFERED
;AT ONE TIME BY THE RH11
>;END IFN FTKS10
;TM02 DEVICE-DEPENDENT PARAMETERS
IFN FTTM02,<
;PARAMETERS COMMON TO BOTH KL AND KS
;TAPE CNTRL REGISTER BITS
T2.M7T==20 ;7-TRACK CORE DUMP
;FUNCTIONS
T2.RWF==7 ;REWIND
T2.DCF==11 ;DRIVE CLEAR
T2.SFF==31 ;SKIP-FORWARD
T2.SBF==33 ;SKIP BACKWARD
T2.RDF==71 ;READ
IFN FTKL10,<
;REGISTERS
T2.DSR==010000,,0 ;STATUS REGISTER
T2.DER==020000,,0 ;ERROR
T2.DFC==050000,,0 ;FRAME COUNTER
T2.DTC==110000,,0 ;TAPE CNTRL
T2.DRH==400000,,0 ;RH10 CNTRL REG
T2.DLR==004000,,0 ;LOAD REGISTER
;CONI BITS
T2.DON==10 ;DONE
;STATUS BITS
T2.SER==40000 ;ERROR
T2.SPP==20000 ;POSITION IN PROGRESS
T2.SRY==200 ;READY
T2.SPE==40 ;PHASE ENCODED
T2.SEF==4 ;EOF
T2.SBT==2 ;BOT
;ERROR REG
T2.NER==102200 ;NOT ERRORS IF PE MODE
T2.ERR==176377 ;ERROR IF ON
>; END IFN FTKL10
IFN FTKS10,<
TRHBAS==3,,772440 ;BASE UBA ADDRESS FOR TAPE RH11
;RH11/TM02 REGISTER OFFSETS
MTCS1==0 ;CONTROL REGISTER
MTWC==2 ;WORD COUNT REGISTER
MTBA==4 ;BUS ADDRESS REGISTER
MTFC==6 ;FRAME COUNT REGISTER
MTCS2==10 ;STATUS REGISTER
MTDS==12 ;DRIVE STATUS REGISTER
MTER==14 ;ERROR REG
MTAS==16 ;ATTENTION SUMMARY
MTCC==20 ;CHARACTER CHECK REGISTER
MTDB==22 ;DATA BUFFER
MTMR==24 ;MAINT REGISTER
MTDT==26 ;DRIVE TYPE
MTSN==30 ;SERIAL NUMBER
MTTC==32 ;TAPE CONTROL REGISTER
;CONTROL REGISTER BIT ASSIGNMENTS
C1.SC==100000 ;(R) SPECIAL CONDITION (ALL ERRORS)
C1.TRE==40000 ;(R/W) TRANSFER ERROR
C1.CPE==20000 ;(R) CONTROL BUS PARITY ERROR
C1.DVA==4000 ;(R) DRIVE AVAILABLE
C1.PSL==2000 ;(R/W) PORT SELECT
C1.RDY==200 ;(R) READY
C1.IE==100 ;(R/W) INTERRUPT ENABLED
;STATUS REGISTER BIT ASSIGNMENTS
C2.DLT==100000 ;(R) DATA LATE (OVERRUN)
C2.WCE==40000 ;(R) WRITE CHECK ERROR
C2.UPE==20000 ;(R/W) UNIBUS PARITY ERROR
C2.NXD==10000 ;(R) NON-EXISTANT DRIVE
C2.NXM==4000 ;(R) NON-EXISTANT MEMORY
C2.PGE==2000 ;(R) PROGRAM ERROR
C2.MXF==1000 ;(R/W) MISSED TRANSFER
C2.DPE==400 ;(R) DATA BUS PARITY ERROR
C2.OR==200 ;(R) OUTPUT READY
C2.IR==100 ;(R) INPUT READY
C2.CLR==40 ;(W) CONTROLLER CLEAR
C2.PAT==20 ;(R/W) PARITY TEST
C2.BAI==10 ;(R/W) UNIBUS ADDRESS INCREMENT INHIBIT
;DRIVE STATUS REGISTER
DS.ATA==1B20 ;ATTENTION
DS.ERR==1B21 ;COMPOSITE ERROR
DS.PIP==1B22 ;POSITIONING IN PROGRESS
DS.MOL==1B23 ;MEDIUM ON LINE
DS.WRL==1B24 ;WRITE LOCKED
DS.EOT==1B25 ;END OF TAPE
DS.DPR==1B27 ;DRIVE PRESENT
DS.DRY==1B28 ;DRIVE READY (NOT GO)
DS.SSC==1B29 ;SLAVE STATUS CHANGE
DS.PES==1B30 ;PHASE ENCODED STATUS
DS.SDN==1B31 ;SHUTDOWN BIT
DS.IDB==1B32 ;IDENT BURST (FOR PE)
DS.TM==1B33 ;TAPE MARK
DS.BOT==1B34 ;BEGINNING OF TAPE
DS.SLA==1B35 ;SLAVE ATTENTION
DS.OK==DS.EOT!DS.PES!DS.TM!DS.BOT!DS.SSC!DS.SDN!DS.IDB ;BITS WHICH DON'T MATTER
DS.GUD==DS.MOL!DS.DPR!DS.DRY ;THESE BITS MUST BE ON
;DRIVE ERROR REGISTER
ER.COR==1B20 ;CORRECTABLE DATA/ CRC ERROR
ER.UNS==1B21 ;UNSAFE
ER.OPI==1B22 ;OPERATION INCOMPLETE
ER.DTE==1B23 ;DRIVE TIMING ERROR
ER.NEF==1B24 ;NON-EXISTANT FUNCTION
ER.CS==1B25 ;CORRECTABLE SKEW/ ILLEGAL TAPE MARK
ER.FCE==1B26 ;FRAME COUNT ERROR
ER.NSG==1B27 ;NON-STANDARD GAP (CRAP IN THE GAP)
ER.LRC==1B28 ;LRC ERROR/ FORMAT (PREAMBLE POSTAMBLE) ERROR
ER.INC==1B29 ;INCORRECTABLE DATA/ VERTICAL PARITY ERROR
ER.DPA==1B30 ;DATA BUS PARITY ERROR
ER.FMT==1B31 ;FORMAT ERROR
ER.CPA==1B32 ;CBUS PARITY ERROR
ER.RMR==1B33 ;REG MODIFICATION REFUSED
ER.ILR==1B34 ;ILLEGAL REGISTER ADR
>; END IFN FTKS10
>; END IFN FTTM02
;TX01/DX10 DEVICE-DEPENDENT PARAMETERS
IFN FTDX10,<
;DEVICE DATAO BITS
DO.RES==1B16 ;DO LOCAL RESET
DO.LRS==1B17 ;LOAD REG SELECT
DO.UC0==4 ;MP CTL 0
DO.UC1==5 ;MP CTL 1
DU0HLT==1B19 ;HALT
DU0CON==1B20 ;CONTINUE
DU0EXM==1B22 ;EXAMINE
DU0DEP==1B23 ;DEPOSIT
UP.SA==200 ;MP START ADDRESS
PDC==220 ;DEVICE CODE
ICPC==20 ;PLACE FOR INITIAL CHL PC
;CHL BITS
CH.COP==1B1+1B3 ;DEVICE COMMAND, AUTO ERROR RETRY
CH.GO==1B2 ;GO BIT
CH.JMP==1B3 ;CHL JMP
CH.STS==1B4 ;STORE STATUS
CH.FRC==1B5 ;FORCE SENSE BYTES
;DEVICE COMMANDS
TX.NOP==3 ;NOOP
TX.FRD==2 ;READ FORWARD
TX.FSR==67 ;FORWARD SPACE RECORD
TX.BSR==47 ;BACK SPACE RECORD
TX.REW==7 ;REWIND
;CONI BITS
TX.RUN==1B17 ;RUN BIT
TX.ILI==1B25 ;INHIBIT LOAD ICPC
TX.UPE==1B26 ;MP ERROR
TX.MPE==1B27 ;MEM PARITY ERROR
TX.NXM==1B28 ;NXM
TX.STA==1B29 ;STATUS AVAILABLE
TX.CLR==1B31 ;CLEAR
TX.CON==1B32 ;CONTINUE
;SENSE BYTE DEFINITIONS
LSNS==^D24 ;NUMBER OF SENSE BYTES
SB1==4 ;OFFSET INTO CHSNS FOR BYTE 1
SB17TK==1B11 ;DRIVE IS 7-TK
;STATUS BITS IN DSR/CSR
DS.UCH==1B6 ;UNIT CHECK
DS.UEX==1B7 ;UNIT EXCEPTION
CS.SLE==1B11 ;SELECTION ERROR
CS.SQE==1B12 ;SEQUENCE ERROR
CS.DPE==1B13 ;DEVICE PARITY ERROR
CS.LNE==1B14 ;LENGTH ERROR
CS.DSF==1B17 ;DSR FLAG
CS.NFG==1B18 ;SENSE AND/OR STATUS NO GOOD
CS.INC==1B19 ;OP INCOMPLETE
CS.STE==1 ;ENDING STATUS
CS.STC==2 ;CU INITIATED STATUS
;DATA MODES
TX.7TK==3 ;7 TRACK CORE DUMP
TX.9TK==0 ;9 TRACK CORE DUMP
TX.D72==063 ;200 BPI + ODD PARITY
TX.D75==163 ;556 BPI + ODD PARITY
TX.D78==263 ;800 BPI + ODD PARITY
>; END IFN FTDX10
;TX02/DX20 DEVICE-DEPENDENT PARAMETERS
IFN FTDX20,<
;RH20 CONI/CONO BITS
D2.ATN==1B28 ;ATTENTION
D2.CLR==5010 ;BITS TO CLEAR ERRORS
;RH20 DATAI/DATAO BITS
D2.SCR==71B5 ;RH20 SECONDARY COMMAND REGISTER
D2.LDR==1B6 ;LOAD REGISTER ON DATAO
D2.RCP==1B7 ;RESET COMMAND LIST POINTER
D2.SCS==1B10 ;STORE CHANNEL STATUS
D2.DTE==1B19 ;DISABLE TRANSFER ERROR STOP
D2.TRA==1B0 ;TRANSFER IN CHANNEL COMMAND LIST
D2.RHJ==1B1 ;JUMP WORD IN CHANNEL COMMAND LIST
D2.HLT==1B1 ;HALT CHANNEL WHEN COMBINED WITH D2.TRA
;DX20 DATAO/DATAI BITS
D2.CTR==0B5 ;CONTROL REGISTER
D2.REW==7 ;REWIND OPERATION PLUS GO BIT
D2.SFR==31 ;SKIP FORWARD OPERATION PLUS GO BIT
D2.SBR==33 ;SKIP BACKWARD OPERATION PLUS GO BIT
D2.SNS==45 ;SENSE OPERATION PLUS GO BIT
D2.RDF==71 ;READ FORWARD PLUS GO BIT
D2.STR==1B5 ;STATUS REGISTER
D2.CER==1B21 ;COMPOSITE ERROR
D2.RUN==1B23 ;MICROPROCESSOR IS RUNNING
D2.ERR==2B5 ;ERROR REGISTER
D2.HER==177B35 ;HARD ERRORS
D2.MTR==3B5 ;MAINTENANCE REGISTER
D2.SCY==1B31 ;SINGLE CYCLE
D2.SMP==1B33 ;START MICRO PROCESSOR
D2.RES==1B34 ;RESET MICRO PROCESSOR
D2.ASR==4B5 ;ATTENTION SUMMARY REGISTER
D2.FCR==5B5 ;FRAME COUNT REGISTER
D2.GP0==20B5 ;STATUS INDEX/ENDING STATUS REGISTER
D2.DVE==1B25 ;DEVICE END
D2.UCK==1B26 ;UNIT CHECK
D2.UEX==1B27 ;UNIT EXCEPTION
D2.RST==1B28 ;REQUEST STATUS UPDATE
D2.GP1==21B5 ;DRIVE NUMBER REGISTER
D2.GP4==24B5 ;ASYNCHRONOUS STATUS REGISTER
D2.GP6==26B5 ;EXTENDED STATUS REGISTER 0
D2.DR0==30B5 ;DIAGNOSTIC REGISTER 0
D2.DR1==31B5 ;DIAGNOSTIC REGISTER 1
D2.IRE==1B20 ;INSTRUCTION REGISTER ENABLE
D2.MSE==1B21 ;ENABLE MICRO-STORE LOAD FROM IR
D2.PCE==1B22 ;PC ENABLE
D2.PCI==1B23 ;PC AUTO INCREMENT
D2.DR7==37B5 ;DIAGNOSTIC REGISTER 7
D2.IRP==1B22 ;IR PARITY ERROR
D2.DLR==004000,,0 ;LOAD REGISTER
D2.DRE==000400,,0 ;DISABLE REGISTER ACCESS ERROR STOP
;MISCELLANEOUS DEFINITIONS
D2.7TK==1B31 ;DRIVE IS 7 TRACK IN SENSE BYTE 1
D2.SAD==1 ;DX20 START ADDRESS
D2.C10==100 ;REQUIRED CONTENTS OF CRAM LOCATION 10
D2.C11==042562 ;REQUIRED CONTENTS OF CRAM LOCATION 11
;MAGIC ADDRESS AND VALUE
MAGICA==11 ;ADDRESS WE MUST STORE MAGIC VALUE IN
MAGICV==42562 ;THE MAGIC VALUE
>; END IFN FTDX20
;TM78 DEVICE-DEPENDENT PARAMETERS
IFN FTTM78,<
;DEVICE REGISTERS
T7.ICD==010000,,0 ;INTERRUPT CODE
.T7DCD==1 ;DONE
.T7SCD==21 ;SHORT RECORD (OTHERWISE OK)
.T7EOF==2 ;EOF
T7.FMT==020000,,0 ;FORMAT REGISTER
T7.ATR==040000,,0 ;ATTENTION SUMMARY REGISTER
T7.BCT==050000,,0 ;BYTE COUNT REGISTER
T7.NIC==130000,,0 ;NON-DATA INTERRUPT CODE
T7.TMS==210000,,0 ;STATUS REGISTER
T7.TMC==40000 ;TM CLEAR
T7.TMR==100000 ;TM READY
T7.DLR==004000,,0 ;LOAD REGISTER FLAG
.T7DV0==14 ;REGISTER FOR DRIVE 0
;FUNCTIONS
T7.FRW==7 ;REWIND
T7.FSN==11 ;SENSE
T7.FSR==21 ;SKIP RECORD
T7.FBR==23 ;BACKSPACE RECORD
T7.FRD==71 ;READ
>; END IFN FTTM78
SUBTTL MACRO DEFINITIONS
; MACRO TO LOAD THE VECTOR
DEFINE LV (OFS,DAT),<
.ORG BTSVEC+.BT'OFS
IRP DAT,<DAT>
>
;MACRO DEFINITIONS TO ALLOW ASSEMBLY TO BE PHASED STARTING AT .VBOOT
DEFINE BLK(LABEL,SIZE),<LABEL: BLOCK SIZE>
;MACRO TO BUILD THE BOOT VERSION STRING
DEFINE VSTR(VER,EDT),<
ASCIZ/BOOT V'VER'(EDT)
/
>
;MACRO TO CAUSE A FATAL ERROR TRAP AND RESTART BOOT.
DEFINE ERROR(TEXT),<
PUSHJ P,FATERR
JUMP [ASCIZ |TEXT|]
>; END DEFINE ERROR
;MACROS TO HELP IN INSERTING ENTRIES INTO THE PAGE MAP
DEFINE ONE41(FPAGE,LPAGE),<
ZZ==FPAGE
XLIST
REPEAT <LPAGE-FPAGE+1>,<
EXP <PM.DCD>B2+PM.WRT+ZZ
ZZ==ZZ+1
>
LIST
>
DEFINE INSLOC(FLOC,LLOC,INSTN),<
XLIST
REPEAT <LLOC-FLOC+1>,<
INSTN
>
LIST
>
;MACRO TO CAUSE A PAUSE BETWEEN THE DATAO WHICH LOADS THE PREPARATION
;REGISTER AND THE DATAI WHICH READS THE VALUE FROM THE SPECIFIED
;REGISTER.
DEFINE STALL,<
IMULI P,1
IFN FTKL10,<
XLIST
IMULI P,1
LIST
>
>
;MACRO TO PUT TEXT IN FORMAT SO IT LOOKS LIKE 11 ASCII WHEN IT GET INTO
;20F FORMAT. SEE RSXCMN.MAC IF YOU ABSOLUTELY NEED TO KNOW HOW THIS HAPPENS.
;(SIGH, IRPC WON'T DEAL WITH <CR><LF>, SO \| WILL HAVE TO DO)
IFN FTKL10,<
DEFINE ASCI11(A),<
...Z1==0
...Z2==0
IRPC A,<
...Z3==<"'A'">
IFE ...Z3-"\",<...Z3==15>
IFE ...Z3-"|",<...Z3==12>
IFE <...Z2-0>,<...Z1==...Z3>
IFE <...Z2-1>,<...Z1==<...Z3_^D8>!...Z1>
IFE <...Z2-2>,<...Z1==<...Z3_^D16>!...Z1>
IFE <...Z2-3>,<EXP <...Z3_^D24>!...Z1
...Z2==-1>
...Z2==...Z2+1>
IFN ...Z2,<EXP ...Z1>
>
>;FTKL10
IFN FTKS10,< ;IF A KS10, IT'S ASCIZ AFTER ALL!
DEFINE ASCI11(A),<
...Z1==0
...Z2==0
IRPC A,<
...Z3==<"'A'">
IFE ...Z3-"\",<...Z3==15>
IFE ...Z3-"|",<...Z3==12>
IFE <...Z2-0>,<...Z1==<...Z3>B6>
IFE <...Z2-1>,<...Z1==<...Z3>B13!...Z1>
IFE <...Z2-2>,<...Z1==<...Z3>B20!...Z1>
IFE <...Z2-3>,<...Z1==<...Z3>B20!...Z1>
IFE <...Z2-4>,<EXP <...Z3>B27!...Z1
...Z2==-1>
...Z2==...Z2+1>
IFN ...Z2,<EXP ...Z1>
>
>;FTKS10
SUBTTL MICROCODE LOADER
RELOC 0
LOADER: JFCL ;NO CCL
RESET ;STOP I/O
SETOM USRFLG ;REMEMBER TO DO USER MODE I/O TO THE TTY
MOVE P,[IOWD PDLLEN,BTSPDL] ;SET UP A PUSH DOWN LIST
PUSHJ P,DELPGS ;KILL USELESS PAGES
GO:
LOADR1: PUSHJ P,QINIT ;INIT QUESTION BUFFER
MOVEI T1,[ASCIZ/Create binary output files/]
PUSHJ P,QTEXT ;STORE IN BUFFER
PUSHJ P,QYNT ;APPEND [Y/N] AND TERMINATE BUFFER
MOVEI T2,[ASCIZ/No/] ;DEFAULT ANSWER
PUSHJ P,ASKYN ;ASK
JRST LOADR1 ;CONFUSED USER
TDZA T1,T1 ;USER SAID NO
MOVEI T1,1 ;USER SAID YES
MOVEM T1,BINFLG ;SAVE FLAG
JUMPN T1,LOADR3 ;SKIP DDT QUESTION IF WRITING FILES
LOADR2: SKIPN .JBDDT ;DDT LOADED?
JRST LOADR3 ;NO
PUSHJ P,QINIT ;INIT QUESTION BUFFER
MOVEI T1,[ASCIZ/Preserve EDDT and symbols/]
PUSHJ P,QTEXT ;STORE IN BUFFER
PUSHJ P,QYNT ;APPEND [Y/N] AND TERMINATE BUFFER
MOVEI T2,[ASCIZ/No/] ;DEFAULT ANSWER
PUSHJ P,ASKYN ;ASK
JRST LOADR2 ;CAN'T DECIDE
PUSHJ P,DELDDT ;ZAP OLD LOADER+DDT+SYMBOLS
LOADR3: PUSHJ P,HIADDR ;FIND HIGHEST ADDRESS IN USE
MOVEM T1,UCODSA ;SAVE AS UCODE STARTING ADDRESS
MOVEM T1,LOADFF ;SAVE FIRST FREE LOCATION
MOVSI U,-UCDNUM ;FOR INDEXING INTO UCODE TABLES
LOADR4: SKIPN UCDTXT(U) ;THIS A REAL ENTRY?
JRST LOADR5 ;NO
PUSHJ P,QINIT ;INIT QUESTION BUFFER
MOVEI T1,[ASCIZ/Load /]
PUSHJ P,QTEXT ;STORE IN BUFFER
MOVE T1,UCDTXT(U) ;GET TEXT
PUSHJ P,QTEXT ;STORE IN BUFFER
PUSHJ P,QYNT ;APPEND [Y/N] AND TERMINATE BUFFER
MOVEI T2,[ASCIZ/No/] ;DEFAULT ANSWER
PUSHJ P,ASKYN ;ASK
JRST LOADR4 ;CONFUSED USER
JRST LOADR5 ;DON'T WANT IT
PUSHJ P,LODFIL ;LOAD A FILE
JRST LOADR4 ;GIVE THE GUY A CHANCE TO FIX THINGS
LOADR5: AOBJN U,LOADR4 ;LOOP BACK FOR ANOTHER UCODE
SKIPN BINFLG ;WRITING BINARY FILES?
JRST LOADR6 ;NO
EXIT 1, ;DONE
JRST LOADER ;THE FOOL TYPED CONTINUE
LOADR6: PUSHJ P,MEMMAP ;DISPLAY MEMORY MAP
DMOVE T1,.JBSYM ;GET POINTER TO SYMBOL TABLES
DMOVEM T1,BTSVEC+.BTSYM ;SAVE FOR DEBUGGING
MOVEI T1,BOOT ;GET START ADDRESS
HRRM T1,.JBSA ;STORE IT
IFN FTKL10,<
PUSHJ P,EXBFIL ;WRITE AN EXB FILE FOR RSX-20F
>; END IFN FTKL10
MOVSI T1,SAVBLT ;WHERE THE FINAL INSTRUCTIONS LIVE
HRRI T1,.JBBLT ;AND WHERE THEY'RE MOVING TO
BLT T1,.JBBLT+3 ;MOVE SAVE. UUO INTO PLACE
MOVSI 17,SAVCOD ;POINT TO CODE THAT RUNS IN THE ACS
BLT 17,17 ;LOAD THE ACS
JRST SAVGO ;DELETE LOADER, DO SAVE, AND EXIT
SUBTTL FILE LOADERS -- DISPATCH
LODFIL: SETZM UCODWD ;CLEAR WORD COUNT
SETZM UCODCK ;AND THE CHECKSUM
SETZM UCODVR ;AND THE VERSION NUMBER
MOVSI T1,UCODBF ;POINT TO START OF TEMP STORAGE
HRRI T1,UCODBF+1 ;MAKE A BLT POINTER
SETZM UCODBF ;CLEAR FIRST WORD
BLT T1,UCODBF+UCDSIZ-1 ;CLEAR TEMP STORAGE
MOVE T1,UCDNAM(U) ;GET FILE NAME
HLLZ T2,UCDEXT(U) ;GET EXTENSION
MOVE T3,UCDMOD(U) ;GET I/O MODE
PUSHJ P,SETIO ;SET UP FOR I/O
MOVEI T1,.FORED ;FILOP FUNCTION
PUSHJ P,FILOP ;DO IT
JRST OPNERR ;FAILED
MOVSI T1,-FMTLEN ;-LENGTH OF TABLE
HRRI T1,FMTTAB ;MAKE AN AOBJN POINTER
LODFI1: HLLZ T2,(T1) ;GET AN EXTENSION
CAME T2,UCDEXT(U) ;A MATCH?
AOBJN T1,LODFI1 ;NO
SKIPL T1
HALT .
HRRZ T2,(T1) ;GET DISPATCH ADDRESS
PUSHJ P,(T2) ;LOAD FILE
JRST LODFI4 ;FAILED
SKIPE BINFLG ;WRITING BINARY FILES?
JRST LODFI2 ;YES
PUSHJ P,GETCOR ;ALLOCATE CORE
JRST LODFI4 ;FAILED--ALL DONE HERE
MOVE T1,UCDPTR(U) ;GET UCODE POINTER INTO VECTOR
MOVE T2,UCODWD ;GET WORD COUNT
AOS T2 ;PLUS ONE FOR THE VERSION WORD
MOVE T3,LOADFF ;AND LOAD ADDRESS
SUBI T3,BTSVEC ;OFFSET FROM THE START OF THE VECTOR
DMOVEM T2,(T1) ;SAVE IN VECTOR
MOVE T1,UCODVR ;GET THE VERSION
MOVEM T1,@LOADFF ;SAVE
AOS LOADFF ;ADVANCE
MOVSI T1,UCODBF ;POINT TO TEMP STORAGE
HRR T1,LOADFF ;AND TO PERMANENT STORAGE
MOVE T2,UCODWD ;GET WORD COUNT
ADD T2,LOADFF ;COMPUTE END OF BLT
BLT T1,-1(T2) ;COPY
MOVE T1,UCODWD ;GET WORD COUNT AGAIN
ADDM T1,LOADFF ;UPDATE FIRST FREE LOCATION
JRST LODFI3 ;FINISH UP
LODFI2: RELEAS IOC, ;RELEASE CHANNEL
PUSHJ P,WRTBIN ;WRITE OUT BINARY FILE
POPJ P, ;FAILED
LODFI3: AOS (P) ;SKIP
LODFI4: RELEAS IOC, ;RELEASE CHANNEL
POPJ P, ;AND RETURN
FMTTAB: XWD 'A8 ',A8L ;A8 FORMAT LOADER
XWD 'ADX',ADX ;ADX FORMAT LOADER
XWD 'ULD',ULD ;ULD FORMAT LOADER
FMTLEN==.-FMTTAB ;LENGTH OF TABLE
LODER2: PUSHJ P,PRCRLF ;START WITH A CRLF
MOVEI T1,[ASCIZ/? Input error reading /]
PUSHJ P,PRMSG ;TYPE TEXT
PUSHJ P,PRFILE ;PRINT FILESPEC
PUSHJ P,PRCRLF ;FINISH WITH A CRLF
JRST LODFI4 ;GO EXIT THROUGH COMMON CLEANUP CODE
FMTERR: MOVEI T1,[BYTE (7).CHCRT,.CHLFD,"?"," ",0]
PUSHJ P,PRMSG ;START ERROR MESSAGE
HLLZ T1,UCDEXT(U) ;GET UCODE EXTENSION
PUSHJ P,PRSIX ;PRINT IT
MOVEI T1,[ASCIZ / file format error reading /]
PJRST FILERR ;PRINT FILESPEC AND RETURN
OPNERR: MOVEI T1,[ASCIZ /Open failed for /]
JRST IOEERR ;ENTER COMMON CODE
INPERR: MOVEI T1,[ASCIZ /Input error reading /]
JRST IOEERR ;ENTER COMMON CODE
OUTERR: MOVEI T1,[ASCIZ /Output error writing /]
JRST IOEERR ;ENTER COMMON CODE
UEFERR: MOVEI T1,[ASCIZ /Unexpected EOF reading /]
JRST IOEERR ;ENTER COMMON CODE
CHKERR: MOVEI T1,[ASCIZ /File data checksum error reading /]
IOEERR: PUSH P,T1 ;SAVE T1
MOVEI T1,[BYTE (7).CHCRT,.CHLFD,"?"," ",0]
PUSHJ P,PRMSG ;START ERROR MESSAGE
POP P,T1 ;GET START OF TEXT
FILERR: PUSHJ P,PRMSG ;PRINT TEXT
PUSHJ P,PRFILE ;PRINT FILESPEC
PJRST PRCRLF ;END WITH A CRLF
SUBTTL FILE LOADERS -- A8 FORMAT
A8L: MOVSI T1,(POINT 7,) ;BYTE POINTER
PUSHJ P,SETBUF ;SET UP BUFFERS
MOVE T1,[BYTE (12)7402,7402,7402] ;PDP-8 HALT INSTRUCTIONS
MOVEM T1,UCODBF ;SAVE IN BUFFER
MOVE T1,[UCODBF,,UCODBF+1] ;SET UP BLT
BLT T1,UCODBF+<10000/3>-1 ;FILL ENTIRE BUFFER
A8L1: PUSHJ P,WCREAD ;GET WORD COUNT IN WC
JUMPE T1,A8L3 ;ALMOST DONE IF ZERO
MOVE T4,T1
PUSHJ P,WDREAD ;GET DATA WORD
PUSH P,T2
IDIVI T1,3
ADDI T1,UCODBF ;INDEX INTO BUFFER
MOVE T3,T1 ;COPY ADDRESS
IMULI T2,^D12
MOVEI T1,^D36
SUB T1,T2
LSH T1,^D12
IORI T1,^D12_6
HRLM T1,T3 ;FORM BYTE PNTR
POP P,T2 ;RESTORE
A8L2: PUSHJ P,WDREAD ;GET WORD
IDPB T1,T3 ;STASH WORD
SOJG T4,A8L2 ;LOOP THROUGH ALL WORDS
PUSHJ P,CHREAD ;READ AND VERIFY CHECKSUM
JRST A8L1 ;GET NEXT RECORD
A8L3: MOVEI T1,<10000/3> ;NUMBER OF PDP-10 WORDS
MOVEM T1,UCODWD ;SAVE FOR CORE ALLOCATOR
LDB T1,[POINT 12,UCODBF+1,11] ;GET VERSION NUMBER
DPB T1,[POINT 9,UCODVR,11] ;SAVE
JRST CPOPJ1 ;RETURN
;ROUTINE TO READ THE CHECKSUM FROM FILE AND THE CRLF
;CHECK THAT CHECKSUM IS CORRECT
CHREAD: PUSHJ P,GET2W ;GET A WORD
CAIE T2,.CHCRT ;TERMINATOR BETTER BE CR
PJRST FMTERR ;FORMAT ERROR
ADD T1,UCODCK ;ADD COMPUTED CHECKSUM
ANDI T1,7777 ;MASK DOWN
JUMPN T1,CHKERR ;JUMP IF CHECKSUM ERROR
PUSHJ P,GETBYT ;GET A BYTE
PJRST UEFERR ;UNEXPECTED EOF
CAIE T1,.CHLFD ;DOUBLE CHECK CRLF
PJRST FMTERR ;FORMAT ERROR
POPJ P, ;RETURN
;PDP-8 A8 UTILITIES
GET2W: PUSH P,[0] ;INIT ANSWER
PUSHJ P,GETA8 ;GET FIRST CHAR
JRST GET2X ;EXIT IF NOT DIGIT
MOVEM T1,0(P) ;STASH ON PDL
PUSHJ P,GETA8 ;GET NEXT
JRST GET2X ;MUST BE SINGLE DIGIT
EXCH T1,0(P) ;NEW LOW ORDER BYTE
LSH T1,6 ;MAKE HIGH ORDER BYTE
IORM T1,0(P) ;COMBINE
PUSHJ P,GETBYT ;GET A BYTE
PJRST UEFERR ;UNEXPECTED EOF
GET2X: MOVE T2,T1 ;RETURN BREAK CHAR IN T2
POP P,T1 ;RESTORE WORD TO T1
POPJ P, ;RETURN
;GET NEXT FILE CHAR AND RETURN LOW 6 BITS
GETA8: PUSHJ P,GETBYT ;GET A BYTE
PJRST UEFERR ;UNEXPECTED EOF
CAIE T1,"," ;CHECK TERMINATOR
CAIN T1,.CHCRT ;CARRIAGE RETURN?
POPJ P, ;NON SKIP RETURN
ANDI T1,77 ;TRIM TO LOW ORDER 6-BIT
JRST CPOPJ1 ;RETURN
;GET WORD COUNT FFROM FILE
WCCOMM: PUSHJ P,SKPCOM ;SKIP COMMENT
WCREAD: PUSHJ P,GETBYT ;READ A BYTE
PJRST UEFERR ;UNEXPECTED EOF
CAIE T1,"8" ;CHECK VALIDITY
JRST WCCOMM ;SKIP COMMENT AND TRY AGAIN
PUSHJ P,GETBYT ;GET A BYTE
PJRST UEFERR ;UNEXPECTED EOF
CAIE T1," " ;BETTER BE A SPACE
PJRST FMTERR ;FORMAT ERROR
SETZM UCODCK ;INIT CHECKSUM
WDREAD: PUSHJ P,GET2W ;GET 12 BIT NUMBER
ADDM T1,UCODCK ;ADD TO CHECKSUM
CAIE T2,"," ;NEED A COMMA
PJRST FMTERR ;FORMAT ERROR
POPJ P, ;RETURN (ANSWER IN T1)
;ROUTINE TO SKIP COMMENTS
SKPCOM: CAIE T1,";" ;VALID COMMENT CHAR?
PJRST FMTERR ;FORMAT ERROR
SKPCM1: PUSHJ P,GETBYT ;GET A BYTE
PJRST UEFERR ;UNEXPECTED EOF
CAIE T1,.CHLFD ;LINE FEED?
JRST SKPCM1 ;NO - LOOP
POPJ P, ;YES - RETURN
SUBTTL UCODE FILE PROCESSING -- ADX FORMAT
CRDAT==UCODBF ;CRAM - 2K*16 BITS
DRDAT==CRDAT+2000 ;DRAM - 1K*8 BITS
ADXWC==DRDAT+400 ;LOAD ADDRESS,,WORD COUNT
ADXDAT==ADXWC+1 ;DATA WORDS
ADX: MOVSI T1,(POINT 7,) ;BYTE POINTER
PUSHJ P,SETBUF ;SET UP BUFFERS
ADX1: PUSHJ P,ADXLIN ;READ A LINE
JUMPE T1,ADX4 ;DONE?
MOVNS T1 ;NEGATE WORD COUNT
HRLZS T1 ;MAKE AN AOBJN POINTER
SKIPN T3 ;SKIP IF CRAM
JRST ADX2 ;DRAM
ROT T2,-1
TLZN T2,400000
TLOA T2,442200
TLO T2,222200
ADDI T2,CRDAT ;FORM LOAD ADDRESS
JRST ADX3 ;ENTER STORAGE LOOP
ADX2: IDIVI T2,4 ;COMPUTE STARTING BYTE
ADD T2,ADXTAB(T3) ;FORM BYTE POINTER
ADX3: MOVE T3,ADXDAT(T1) ;GET A DATA WORD
IDPB T3,T2 ;STORE
AOBJN T1,ADX3 ;LOOP THROUGH THIS LINE
JRST ADX1 ;GO GET ANOTHER LINE
ADX4: LDB T1,[POINT 10,CRDAT,17] ;GET EDIT LEVEL
LDB T2,[POINT 6,CRDAT,7] ;GET VERSION NUMBER
LSH T2,30 ;POSITION
IOR T1,T2 ;FORM STANDARD DEC-10 VERSION NUMBER
MOVEM T1,UCODVR ;SAVE
MOVEI T1,2000+400 ;CRAM + DRAM SIZE
MOVEM T1,UCODWD ;SAVE WORD COUNT
JRST CPOPJ1 ;RETURN
ADXTAB: POINT 8,DRDAT, ;BYTE 0
POINT 8,DRDAT,7 ;BYTE 1
POINT 8,DRDAT,15 ;BYTE 2
POINT 8,DRDAT,23 ;BYTE 3
;ADXLIN - READS IN A LINE OF DATA WORDS TO BE LOADED INTO CRAM OR
; WORKING MEMORY
;
; CALL ADXLIN
;
; RETURN+1: ALWAYS
; LINDAT IS THE TALBE WHICH HAS THE CONVERTED DATA WORDS
; T1/ WORD COUNT OF DATA WORDS IN THE TABLE
; T2/ LOAD ADDR
; T3/ 0 FOR WORKING MEMORY, 1 FOR CRAM
ADXLIN: SETZM UCODCK ;RESET CHECKSUM
SETZM ADXWC ;RESET WORD COUNT
MOVE T2,[ADXDAT,,ADXDAT+1] ;INITIALIZE WORK AREA
SETZM ADXDAT ;CLEAR FIRST WORD
BLT T2,ADXWC+^D32-1 ;ZERO LINE BUFFER
MOVEI T3,^D32*5 ;MAXIMUN NUMBER OF CHARACTERS
MOVEI T4,0 ;FLAG WORKING MEMORY
PUSHJ P,GETBYT ;READ A BYTE
PJRST UEFERR ;UNEXPECTED EOF
CAIN T1,";" ;IS IT COMMENT LINE?
JRST ADXLI5 ;YES, IGNORE IT
CAIE T1,"C" ;CRAM LOAD LINE?
JRST ADXLI1 ;NO, SEE IF WM LOAD LINE
MOVEI T4,1 ;SET FLAG FOR CRAM
JRST ADXLI2 ;JUMP AROUND
ADXLI1: CAIE T1,"W" ;WM LOAD LINE?
PJRST FMTERR ;FORMAT ERROR
ADXLI2: PUSHJ P,GETBYT ;GET A BYTE
PJRST UEFERR ;UNEXPECTED EOF
CAIE T1," " ;MUST BE BLANK
PJRST FMTERR ;FORMAT ERROR
PUSHJ P,ADXWRD ;GET NEXT WORD
PJRST FMTERR ;FORMAT ERROR
MOVEM T1,ADXWC ;SAVE WORD COUNT FOR THE LINE
MOVEM T1,UCODCK ;INITIALIZE CHECKSUM FOR THE LINE
PUSHJ P,ADXWRD ;GET NEXT WORD
PJRST FMTERR ;FORMAT ERROR
ADDM T1,UCODCK ;UPDATE CHKSUM
DPB T1,[POINT 16,ADXWC,19] ;SAVE LOAD ADDR.
MOVSI T3,-^D32 ;SETUP LOOP INDEX FOR SUBSEQUENT WORDS
ADXLI3: PUSHJ P,ADXWRD ;GET NEXT WORD
JRST ADXLI4 ;LAST WORD, CHECKSUM, READ IN T1
ADDM T1,UCODCK ;UPDATE CHECKSUM
MOVEM T1,ADXDAT(T3) ;SAVE DATA WORD
AOBJN T3,ADXLI3 ;LOOP BACK
PJRST FMTERR ;FORMAT ERROR
ADXLI4: MOVEM T1,ADXDAT(T3) ;SAVE EVEN CHECKSUM
ADD T1,UCODCK ;ADD CHECKSUM INTO T1
TRNE T1,177777 ;CHECKSUM SHOULD BE 0
PJRST CHKERR ;CHECKSUM RROR
LDB T1,[POINT 16,ADXWC,35] ;WC IN T1
LDB T2,[POINT 16,ADXWC,19] ;LOAD ADDR. IN T2
MOVE T3,T4 ;GET CRAM/WORKING MEMORY FLAG
POPJ P, ;NONSKIP RETURN
ADXLI5: PUSHJ P,GETBYT ;GET A BYTE
PJRST UEFERR ;UNEXPECTED EOF
CAIE T1,.CHLFD ;LINE FEED?
JRST ADXLI5 ;FLUSH CHARACTER
JRST ADXLIN ;ELSE GO PROCESS NEW LINE
;ADXWRD - GET A DATA WORD FROM DATLIN WHICH IS A CHAR. STRING
; CONVERT THE ASCIIZED DATA WORD INTO BINARY
;
; CALL ADXWRD
;
; RETURN+1: DATA WORD DELIMITED BY CR
; RETURN+2: DATA WORD DELIMITED BY ,
; T1/ CONVERTED DATA WORD
ADXWRD: SETZ T2, ;INIT RESULT
ADXWR1: PUSHJ P,GETBYT ;GET A BYTE
PJRST UEFERR ;UNEXPECTED EOF
CAIN T1,"," ;SKIP IF NOT COMMA
JRST ADXWR2 ;GOT THE DATA WORD
CAIN T1,.CHCRT ;SKIP IF NOT CR
JRST ADXWR1 ;CR, THROW IT AWAY AND LOOK FOR LF
CAIN T1,.CHLFD ;LINE FEED?
JRST ADXWR3 ;GOT LAST DATA WORD IN LINE
LSH T2,6 ;MAKE ROOM
CAIE T1," " ;SKIP IF BLANK
DPB T1,[POINT 6,T2,35] ;PUT IN T2, UNASCIIZED THE BYTE
JRST ADXWR1 ;GET NEXT CHAR.
ADXWR2: AOS (P) ;SKIP
ADXWR3: MOVE T1,T2 ;GET RESULT
POPJ P, ;AND RETURN
SUBTTL UCODE FILE PROCESSING -- ULD FORMAT
; MACRO TO BUILD A BYTE POINTER TO ULD FILE DATA
DEFINE ULDPNT (SS,YY,PP),<
AA==YY*^D60+^D<PP>
WW==AA/^D36
XX==AA-<WW*^D36>
POINT ^D<SS>,UCODBF+WW,XX
PURGE AA,WW,XX
>
ULD: MOVSI T1,(POINT 7,) ;BYTE POINTER
PUSHJ P,SETBUF ;SET UP BUFFERS
ULD1: PUSHJ P,GETBYT ;GET A BYTE
JRST ULDEOF ;EOF
CAIE T1,"[" ;DATA?
JRST ULD3 ;NO--SKIP REMAINDER OF LINE
PUSHJ P,OCTIN ;READ AN OCTAL DOUBLEWORD
PJRST UEFERR ;FORMAT ERROR
JUMPN T1,FMTERR ;CHECK FOR FORMAT ERRORS
CAIL T2,0
CAILE T2,10000-1
PJRST FMTERR ;FORMAT ERROR
MOVE T3,T2 ;SAVE LOW WORD
MOVE T1,LSTBYT ;GET LAST BYTE READ
CAIE T1,"]" ;END?
PJRST FMTERR ;NO--FORMAT ERROR
PUSHJ P,GETBYT ;GET A BYTE
JRST ULDEOF ;EOF
CAIE T1,"=" ;DATA ON THE WAY?
PJRST FMTERR ;NO--FORMAT ERROR
PUSHJ P,OCTIN ;READ AN OCTAL DOUBLEWORD
PJRST FMTERR ;FORMAT ERROR
IMULI T3,^D60 ;60 BITS PER ENTRY
IDIVI T3,^D36 ;36 BITS PER WORD
MOVNS T4 ;COUNT BITS FROM RIGHT
ADDI T4,^D36
LSH T4,^D30
TLO T4,^D12*100
ADDI T4,UCODBF(T3) ;OFFSET TO APPROPRIATE WORD
MOVEI T3,^D60/^D12 ;NUMBER OF DPB'S TO DO
ROTC T1,^D12 ;FLUSH NOISE BITS
ULD2: ROTC T1,^D12 ;GET NEXT 12 BITS
IDPB T2,T4
SOJN T3,ULD2 ;LOOP
MOVE T1,LSTBYT ;GET LAST BYTE READ AGAIN
;HERE TO EAT THE REST OF THE LINE
ULD3: CAIN T1,.CHLFD ;LINE FEED?
JRST ULD1 ;YES--GO TRY FOR MORE DATA
PUSHJ P,GETBYT ;GET A BYTE
JRST ULDEOF ;EOF
JRST ULD3 ;FLUSH
;HERE ON EOF
ULDEOF: LDB T1,[ULDPNT (03,136,17)] ;MAJOR VERSION
DPB T1,[POINT 9,UCODVR,11]
LDB T1,[ULDPNT (06,136,23)] ;MINOR VERSION
DPB T1,[POINT 6,UCODVR,17]
LDB T1,[ULDPNT (10,137,23)] ;EDIT LEVEL
HRRM T1,UCODVR
MOVEI T1,<<10000*^D60+^D35>/^D36> ;WORD COUNT
MOVEM T1,UCODWD ;SAVE
JRST CPOPJ1 ;RETURN
WRTBIN: MOVE T1,UCDNAM(U) ;GET FILE NAME
MOVSI T2,'BIN' ;GET EXTENSION
MOVEI T3,.IODMP ;DUMP MODE
PUSHJ P,SETIO ;SET UP FOR I/O
MOVE T1,UCODVR ;GET UCODE VERSION NUMBER
MOVEM T1,LEB+.RBVER ;SAVE
MOVEI T1,.FOWRT ;FILOP FUNCTION
PUSHJ P,FILOP ;DO IT
PJRST OPNERR ;FAILED
MOVN T1,UCODWD ;GET -WORD COUNT
SOS T1 ;ACCOUNT FOR VERSION WORD TOO
HRLI T1,UCODVR-1 ;POINT TO START OF BUFFER
MOVSS T1 ;MAKE AN IOWD
SETZ T2, ;TERMINATE LIST
OUT IOC,T1 ;WRITE IT OUT
SKIPA ;NO PROBLEMS
PJRST OUTERR ;REPORT ERROR
PUSHJ P,PRLBKT ;START MESSAGE WITH A BRACKET
MOVEI T1,[ASCIZ /Microcode version /]
PUSHJ P,PRMSG ;PRINT TEXT
MOVE T1,UCODVR ;GET VERSION
PUSHJ P,PRVRSN ;PRINT IT
MOVEI T1,[ASCIZ / written to /]
PUSHJ P,PRMSG ;PRINT TEXT
PUSHJ P,PRFILE ;PRINT FILESPEC
PUSHJ P,PRRBCR ;FINISH WITH A TRAILING BRACKET AND CRLF
JRST CPOPJ1 ;RETURN
DELPGS: MOVNI T2,<<BTSVEC-LOADEN>_-11> ;PAGES TO KILL
MOVEI T3,<<LOADEN+PAGSIZ>_-11> ;STARTING PAGE NUMBER
PUSHJ P,KILPGS ;DELETE PAGES
PUSHJ P,HIPAGE ;GET THE HIGHEST PAGE IN BOOT
MOVE T2,T1 ;COPY PAGE NUMBER
ADD T2,[-1000] ;PAGES TO KILL
MOVE T3,T1 ;STARTING PAGE NUMBER
PUSHJ P,KILPGS ;DELETE PAGES
POPJ P, ;RETURN
DELDDT: PUSHJ P,HIPAGE ;GET HIGHEST PAGE IN USE
MOVEI T2,<<DDT##+PAGSIZ>_-11> ;STARTING PAGE NUMBER
MOVE T3,T2 ;COPY
SUBI T2,(T1) ;PAGES TO KILL
PUSHJ P,KILPGS ;DELETE PAGES
MOVEI T1,0 ;DDT IS GONE
SETDDT T1, ;ZERO DDT START ADDRESS
MOVSI T1,(JFCL) ;NO-OP
HLLM T1,BTSVEC+.BTDDT ;CAN'T ENTER DDT THE NORMAL WAY
HLLM T1,BTSVEC+.BTBPT ; OR BY TYPING CONTROL-D
SETZM .JBBPT ;ZERO UNSOLICITED BREAKPOINT ADDRESS
SETZM .JBSYM ;ZERO SYMBOL TABLE POINTER
SETZM .JBUSY ;ZERO UNDEFINED SYMBOL TABLE POINTER
POPJ P, ;RETURN
KILPGS: MOVE T1,[.PAGCD,,T2] ;SET UP UUO AC
TLO T3,(PA.GAF!PA.GDC) ;DELETE PAGES, OK OF NON-EXISTANT
PAGE. T1, ;DELETE THEM
HALT .
POPJ P, ;RETURN
; COMPUTE THE HIGHEST ADDRESS OR PAGE IN BOOT (AND POSSIBLY DDT)
HIADDR: TDZA T3,T3 ;ADDR ENTRY POINT
HIPAGE: MOVEI T3,1 ;PAGE ENTRY POINT
MOVEI T1,BTSEND ;HIGHEST ADDRESS
SKIPN .JBDDT ;DDT LOADED?
JRST HIEXIT ;FINISH UP
MOVEI T1,<DDTEND##!<PAGSIZ-1>> ;HIGHEST ADDRESS
SKIPN T2,.JBSYM ;SYMBOLS LOADED?
JRST HIEXIT ;FINISH UP
HLRE T1,T2 ;GET -LENGTH OF SYMBOL TABLE
MOVNS T1 ;MAKE POSITIVE
ADDI T1,(T2) ;POINT TO END OF SYMBOL TABLE
HIEXIT: JUMPE T3,CPOPJ ;RETURN IF NO CONVERSION NEEDED
ADDI T1,PAGSIZ ;ROUND UP
LSH T1,-11 ;CONVERT TO A PAGE NUMBER
POPJ P, ;RETURN
; ROUTINE TO ALLOCATION PAGES FOR MICROCODE STORAGE
GETCOR: MOVE T1,[.PAGCD,,T2] ;SET UP UUO TO CREATE NECESSARY PAGES
MOVN T2,UCODWD ;GET WORDS NEEDED
SOS T2 ;PLUS (MINUS) ONE WORD FOR THE VERSION
SUBI T2,PAGSIZ ;ROUND UP (DOWN?)
ASH T2,W2PLSH ;CONVERT TO -NUMBER OF PAGES NEEDED
MOVE T3,LOADFF ;GET FIRST FREE LOCATION
LSH T3,W2PLSH ;CONVERT TO A PAGE NUMBER
TLO T3,(PA.GDC) ;DON'T CARE IF PAGES ALREADY EXIST
PAGE. T1, ;CREATE SOME PAGES
CAIA ;FAILED
JRST CPOPJ1 ;RETURN
PUSHJ P,PRCRLF ;START WITH A CRLF
MOVEI T1,[ASCIZ/? PAGE. UUO error (/]
PUSHJ P,PRMSG ;TYPE TEXT
POP P,T1 ;GET ERROR CODE
PUSHJ P,PROCT ;TYPE IT
MOVEI T1,[ASCIZ/) creating pages/]
PUSHJ P,PRMSG ;TYPE TEXT
PJRST PRCRLF ;END WITH A CRLF AND RETURN
MEMMAP: MOVEI T1,MEMTX1 ;POINT TO HEADER TEXT
PUSHJ P,PRMSG ;TYPE IT
MOVEI T4,BTSVEC ;GET START ADDRESS OF BOOT
PUSHJ P,PRHWDR ;TYPE IT
PUSHJ P,SPACES ;SPACE OVER
SKIPN T4,.JBDDT ;GET DDT STARTING ADDRESS (IF ANY)
MOVE T4,UCODSA ;GET UCODE STARTING ADDRESS
HRRZS P1,T4 ;SAVE ADDR
SUBI T4,1 ;BACK OFF BY ONE FOR BOOTSTRAP END ADDRESS
PUSHJ P,PRHWDR ;TYPE ENDING BOOTSTRAP ADDRESS
PUSHJ P,SPACES ;SPACE OVER
MOVEI T4,-BTSVEC(P1) ;COMPUTE BOOTSTRAP LENGTH
PUSHJ P,PRHWDR ;TYPE IT
PUSHJ P,SPACES ;SPACE OVER
MOVE T1,BTSVEC+.BTVER ;GET OUR VERSION
PUSHJ P,PRVRSN ;PRINT IT
PUSHJ P,PRCRLF ;END LINE
SKIPN .JBDDT ;EDDT LOADED?
JRST MEMMA1 ;NO
MOVEI T1,[ASCIZ/EDDT + symbol table /]
PUSHJ P,PRMSG ;TYPE TEXT
HRRZ T4,.JBDDT ;GET START ADDRESS
MOVE P1,T4 ;COPY
PUSHJ P,PRHWDR ;TYPE IT
PUSHJ P,SPACES ;SPACE OVER
MOVE T2,.JBSYM ;GET POINTER TO SYMBOL TABLE
HLRE T4,T2 ;GET -VE LENGTH
MOVNS T4 ;MAKE POSITIVE
ADDI T4,-1(T2) ;GET END ADDRESS
PUSH P,T4 ;SAVE A BIT
PUSHJ P,PRHWDR ;TYPE IT
PUSHJ P,SPACES ;SPACE OVER
POP P,T4 ;RESTORE END ADDRESS
SUBI T4,(P1) ;COMPUTE LENGTH
PUSHJ P,PRHWDR ;TYPE IT
PUSHJ P,SPACES ;SPACE OVER
MOVE T1,[%%DDT##] ;GET DDT VERSION
PUSHJ P,PRVRSN ;PRINT IT
PUSHJ P,PRCRLF ;END LINE
MEMMA1: MOVSI U,-UCDNUM ;FOR INDEXING INTO UCODE TABLES
MEMMA2: SKIPE P1,UCDPTR(U) ;GET STORAGE ADDRESS/COUNT POINTER
SKIPN 0(P1) ;LENGTH SET?
JRST MEMMA3 ;UCODE ISN'T INCLUDED
MOVE T1,UCDTXT(U) ;GET TEXT
PUSHJ P,PRMSG ;TYPE IT
PUSHJ P,SPACES ;SPACE OVER
MOVE T4,1(P1) ;GET UCODE OFFSET
ADDI T4,BTSVEC ;PLUS THE ORIGIN
PUSHJ P,PRHWDR ;TYPE IT
PUSHJ P,SPACES ;SPACE OVER
MOVE T4,0(P1) ;GET UCODE LENGTH
ADD T4,1(P1) ;FIND STARTING OFFSET
ADDI T4,BTSVEC-1 ;AND THE ADDRESS
PUSHJ P,PRHWDR ;TYPE IT
PUSHJ P,SPACES ;SPACE OVER
MOVE T4,0(P1) ;GET LENGTH AGAIN
PUSHJ P,PRHWDR ;TYPE IT
PUSHJ P,SPACES ;SPACE OVER
MOVE T1,1(P1) ;GET UCODE OFFSET
ADDI T1,BTSVEC ;PLUS THE ORIGIN
MOVE T1,(T1) ;GET UCODE VERSION
PUSHJ P,PRVRSN ;PRINT IT
PUSHJ P,PRCRLF ;END LINE
MEMMA3: AOBJN U,MEMMA2 ;LOOP
MOVEI T1,MEMTX2 ;POINT TO SUMMARY TEXT
PUSHJ P,PRMSG ;TYPE IT
MOVE T4,LOADFF ;POINT TO LAST WORD+1 USED
SUBI T4,BTSVEC ;COMPUTE TOTAL LENGTH
HRRZM T4,BTSVEC+.BTSIZ ;SAVE IN VECTOR
MOVEI T1,PAGSIZ(T4) ;COPY LENGTH AND ROUND UP A PAGE
LSH T1,W2PLSH ;CONVERT TO PAGES
MOVNS T1 ;NEGATE
HRLM T1,BTSVEC+.BTSIZ ;SAVE -SIZE IN PAGES
PUSHJ P,PRHWDR ;TYPE IT
PUSHJ P,PRCRLF ;TYPE A CRLF
PJRST PRCRLF ;ONE MORE AND RETURN
MEMTX1: ASCIZ /
Memory map From To Size Version
------ ------ ------ ---------
Bootstrap /
MEMTX2: ASCIZ /
Total size /
SPACES: MOVEI T1,[ASCIZ / /]
PJRST PRMSG ;SPACE OVER
QINIT: MOVEI T1,<QWDS*5>-1 ;MAXIMUM CHARACTER COUNT
MOVEM T1,QCTR ;SAVE
MOVEI T1,QBUF ;POINT TO BUFFER
HRLI T1,(POINT 7,) ;MAKE A BYTE POINTER
MOVEM T1,QPTR ;SAVE
POPJ P, ;RETURN
QTEXT: HRLI T1,(POINT 7,) ;MAKE A BYTE POINTER
QTEXT1: ILDB T2,T1 ;GET A CHARACTER
JUMPE T2,CPOPJ ;RETURN IF END OF STRING
IDPB T2,QPTR ;PUT A CHARACTER
JRST QTEXT1 ;LOOP
QYNT: MOVEI T1,[ASCIZ\ [Y/N]: \]
PUSHJ P,QTEXT ;APPEND TO QUESTION BUFFER
MOVEI T1,.CHNUL ;GET A NUL
IDPB T1,QPTR ;TERMINATE BUFFER
MOVEI T1,QBUF ;POINT TO BUFFER
POPJ P, ;AND RETURN
DEFINE X (L,PFX,NAM,EXT,TXT,MOD,SIZ),<<SIXBIT /NAM/>>
UCDNAM: UCODES
DEFINE X (L,PFX,NAM,EXT,TXT,MOD,SIZ),<<SIXBIT /EXT/>>
UCDEXT: UCODES
DEFINE X (L,PFX,NAM,EXT,TXT,MOD,SIZ),<
IFE <L>,<EXP 0>
IFN <L>,<EXP BTSVEC+.BTUCD+.BT'PFX>
>
UCDPTR: UCODES
DEFINE X (L,PFX,NAM,EXT,TXT,MOD,SIZ),<
IFE <L>,<EXP 0>
IFN <L>,<EXP [ASCIZ |TXT|]>
>
UCDTXT: UCODES
DEFINE X (L,PFX,NAM,EXT,TXT,MOD,SIZ),<EXP MOD>
UCDMOD: UCODES
SUBTTL GENERATE .EXB FILE FOR RSX-20F
IFN FTKL10,<
EXBFIL: MOVE T1,['BOOT '] ;FILE NAME
MOVSI T2,'EXB' ;EXTENSION
MOVEI T3,.IOIMG ;I/O MODE
PUSHJ P,SETIO ;SET UP I/O AND OPEN CHANNEL
MOVEI T1,.FOWRT ;WRITE FUNCTION
PUSHJ P,FILOP ;CREATE THE FILE
HALT .
MOVSI T1,(POINT 18,) ;BYTE POINTER FOR BUFFERED MODE
PUSHJ P,SETBUF ;SET UP BUFFERS
MOVEI T1,BTSVEC ;POINT TO START OF BOOTSTRAP
MOVEM T1,EXBPTR ;SAVE
SETZB P1,EXBSTA ;INIT BYTE STORAGE AND START ADDRESS FLAG
EXBFI1: PUSHJ P,EXBREC ;BUILD A RECORD
JRST EXBFI3 ;RAN OUT OF DATA
MOVE T1,RECCNT ;GET RECORD BYTE COUNT
PUSHJ P,EXBPU2 ;WRITE IT OUT
HALT .
EXBFI2: SOSGE RECCNT ;COUNT BYTES
JRST EXBFI1 ;GO DO ANOTHER RECORD
ILDB T1,RECPTR ;GET A BYTE
PUSHJ P,EXBPUT ;WRITE IT OUT
HALT .
JRST EXBFI2 ;LOOP BACK FOR ANOTHER BYTE
EXBFI3: SKIPL T1,P1 ;ONE MORE BYTE TO OUTPUT?
JRST EXBFI4 ;NO
PUSHJ P,PUTBYT ;WRITE IT OUT
HALT .
EXBFI4: RELEAS IOC, ;CLOSE AND RELEASE CHANNEL
POPJ P, ;RETURN
; EXB RECORD GENERATOR
EXBREC: SKIPE EXBSTA ;HAVE WE WRITTEN THE START ADDRESS YET?
POPJ P, ;YES--DONE
MOVSI T1,(POINT 8,) ;8-BIT BYTES
HRRI T1,RECBUF ;POINT TO RECORD BUFFER
MOVEM T1,RECPTR ;SAVE
SETZM RECCNT ;RESET BYTE COUNT
PUSHJ P,EXBDAT ;GET AOBJN POINTER TO DATA
SKIPA T1,BTSVEC+.BTSTA ;ALL THAT'S LEFT IS THE START ADDRESS
JRST EXBRE1 ;GOT ONE
HRLI T1,-1 ;MAKE AN AOBJN POINTER
MOVNI T2,5 ;FUDGE BYTE COUNT
MOVEM T2,RECCNT ; JUST A LITTLE BIT
SETOM EXBSTA ;INDICATE WRITING START ADDRESS
EXBRE1: HRRZM T1,EXBLDA ;SAVE LOAD ADDRESS
ADJSP T1,-1 ;COMPENSATE FOR AOBJN LATER ON
PUSH P,T1 ;SAVE LOAD ADDRESS ON STACK
MOVEI T1,EXBLDA ;POINT TO LOAD ADDRESS STORAGE
TDZA T3,T3 ;PROCESSING BYTE COUNT AND ADDRESS NOW
EXBRE2: MOVEI T3,1 ;PROCESSING DATA NOW
LDB T2,[POINT 8,(T1),35] ;PDP-11 BYTE #0
IDPB T2,RECPTR
LDB T2,[POINT 8,(T1),27] ;PDP-11 BYTE #1
IDPB T2,RECPTR
LDB T2,[POINT 8,(T1),19] ;PDP-11 BYTE #2
IDPB T2,RECPTR
LDB T2,[POINT 8,(T1),11] ;PDP-11 BYTE #3
IDPB T2,RECPTR
JUMPE T3,EXBRE3 ;JUMP IF NOT PROCESSING DATA
LDB T2,[POINT 4,(T1),03] ;OVERFLOW HALF-BYTE
IDPB T2,RECPTR
AOSA EXBPTR ;ADVANCE LOAD ADDRESS WORD
EXBRE3: POP P,T1 ;GET BACK AOBJN POINTER
MOVEI T2,4(T3) ;MUST ACCOUNT FOR ALL BYTES PROCESSED
ADDM T2,RECCNT ;ACCUMULATE
AOBJN T1,EXBRE2 ;GO BACK FOR ANOTHER WORD
MOVSI T1,(POINT 8,) ;BYTE POINTER FOR
HRRI T1,RECBUF ; READING DATA
MOVEM T1,RECPTR ;SAVE IT
JRST CPOPJ1 ;RETURN
; GENERATE AOBJN POINTER TO EXB DATA
EXBDAT: MOVEI T1,0 ;INIT WORD COUNT
MOVE T2,EXBPTR ;GET STARTING LOAD ADDRESS
EXBDA1: CAMLE T2,LOADFF ;END OF BOOTSTRAP?
POPJ P, ;YES
SKIPN (T2) ;ZERO?
AOJA T2,EXBDA1 ;YES--COMPRESS ZEROS
MOVEM T2,EXBPTR ;UPDATE LOAD ADDRESS
EXBDA2: CAMG T2,LOADFF ;END OF BOOTSTRAP?
SKIPN (T2) ;NEED TO ZERO COMPRESS?
JRST EXBDA3 ;YES
AOS T2 ;ADVANCE POINTER
CAMLE T1,[-EXBMAX] ;WILL THIS FILL UP THE RECORD?
SOJA T1,EXBDA2 ;NO--KEEP COUNTING
EXBDA3: HRL T1,EXBPTR ;GET LOAD ADDRESS
MOVSS T1 ;MAKE AN AOBJN POINTER
JRST CPOPJ1 ;AND RETURN
; STORE BYTES IN THE EXB FILE
EXBPUT: ANDI T1,377 ;SMALL MACHINES USE SMALL BYTES
JUMPL P1,EXBPU1 ;BYTE LEFT OVER FROM BEFORE?
TLO T1,400000 ;INDICATE INCOMPLETE 16-BIT BYTE
MOVE P1,T1 ;SAVE BYTE
JRST CPOPJ1 ;RETURN
EXBPU1: LSH T1,10 ;SHIFT NEW BYTE TO HIGH BYTE
IOR T1,P1 ;PUT IN THE LOW BYTE FROM LAST CALL
MOVEI P1,0 ;RESET OLD BYTE FOR NEXT TIME
EXBPU2: EXCH T1,P1 ;SAVE NEW BYTE, GET OLD ONE
JUMPGE T1,EXBPU3 ;JUMP IF NO BYTE LEFT OVER FROM BEFORE
PUSHJ P,PUTBYT ;STORE IN FILE
HALT .
EXBPU3: MOVE T1,P1 ;GET NEW BYTE BACK
MOVEI P1,0 ;RESET OLD BYTE FOR NEXT TIME
PUSHJ P,PUTBYT ;STORE NEW BYTE IN FILE
HALT .
JRST CPOPJ1 ;AND RETURN
>; END IFN FTKL10
; SET UP FOR I/O
; CALL: MOVE T1, FILE NAME
; MOVE T2, EXTENSION
; MOVE T3, I/O MODE BITS
; PUSHJ P,SETIO
SETIO: PUSH P,T1 ;SAVE FILE NAME
PUSH P,T2 ;SAVE EXTENSION
MOVSI T1,F.ZBEG ;FIRST CLEAR
HRRI T1,F.ZBEG+1 ; THE FILE
SETZM F.ZBEG ; STORAGE
BLT T1,F.ZEND-1 ; AREA
MOVSI T1,<(FO.PRV)>!IOC ;PRIV BIT + CHANNEL NUMBER
MOVEM T1,FOP+.FOFNC
MOVEM T3,FOP+.FOIOS ;SAVE I/O MODE
MOVSI T1,'DSK' ;DEVICE
MOVEM T1,FOP+.FODEV
MOVSI T1,OBR ;OUTPUT BUFFER RING HEADER
HRRI T1,IBR ;INPUT BUFFER RING HEADER
ANDI T3,17 ;KEEP ONLY THE MODE
CAIE T4,.IODMP ;DUMP MODE?
MOVEM T1,FOP+.FOBRH ;NO--MUST SAVE RING HEADER POINTERS
MOVEI T1,LEB ;POINT TO LOOKUP/ENTER BLOCK
MOVEM T1,FOP+.FOLEB
MOVE T1,[.FOFMX,,FSP] ;POINT TO RETURNED FILESPEC BLOCK
MOVEM T1,FOP+.FOFSP
MOVEI T1,.RBMAX ;LENGTH OF LOOKUP/ENTER BLOCK
MOVEM T1,LEB+.RBCNT
MOVE T1,.JBVER ;SET OUR VERSION NUMBER ON ALL FILES CREATED
MOVEM T1,LEB+.RBVER
POP P,LEB+.RBEXT ;SAVE EXTENSION
POP P,LEB+.RBNAM ;SAVE FILE NAME
POPJ P, ;RETURN
SETBUF: PUSH P,T1 ;SAVE BYTE POINTER
MOVSI T1,(BF.IOU) ;BUFFER USE BIT
HRRI T1,OBF+.BFHDR ;GET ADDRESS OF NEXT OUTPUT BUFFER
MOVEM T1,OBR+.BFADR ;STORE IN OUTPUT BUFFER CONTROL BLOCK
HLLZ T1,(P) ;BYTE POINTER
MOVEM T1,OBR+.BFPTR ;STORE IN OUTPUT BUFFER CONTROL BLOCK
MOVSI T1,201 ;NUMBER OF DATA WORDS IN A BUFFER
HRRI T1,OBF+.BFHDR ;GET ADDRESS OF NEXT OUTPUT BUFFER
MOVEM T1,OBF+.BFHDR ;RING LOOPS ON ITSELF
MOVSI T1,(BF.IOU) ;BUFFER USE BIT
HRRI T1,IBF+.BFHDR ;GET ADDRESS OF NEXT INPUT BUFFER
MOVEM T1,IBR+.BFADR ;STORE IN INPUT BUFFER CONTROL BLOCK
HLLZ T1,(P) ;BYTE POINTER
MOVEM T1,IBR+.BFPTR ;STORE IN INPUT BUFFER CONTROL BLOCK
MOVSI T1,201 ;NUMBER OF DATA WORDS IN A BUFFER
HRRI T1,IBF+.BFHDR ;GET ADDRESS OF NEXT INPUT BUFFER
MOVEM T1,IBF+.BFHDR ;RING LOOPS ON ITSELF
POP P,(P) ;TRIM STACK
POPJ P, ;RETURN
FILOP: MOVE T2,T1 ;COPY FUNCTION CODE FOR LATER
HRRM T1,FOP+.FOFNC ;COMPLETE FUNCTION WORD
MOVEI T1,FOP ;POINT TO ARGUMENT BLOCK
HRLI T1,2 ;ASSUME I/O CALL (LENGTH=2)
CAIE T2,.FORED ;READ?
CAIN T2,.FOWRT ;WRITE?
HRLI T1,.FOMAX ;USE A FULL ARGUMENT BLOCK
FILOP. T1, ;DO SOMETHING
POPJ P,
CAIE T2,.FORED ;READ?
CAIN T2,.FOWRT ;WRITE?
SKIPA ;YES TO EITHER
JRST CPOPJ1 ;ALL DONE
MOVSI T1,FSP+.FOFDV ;POINT TO START OF RETURNED FILESPEC
HRRI T1,DEV ;WHERE TO PUT IT
BLT T1,EXT ;COPY DEVICE, FILE NAME, AND EXTENSION
MOVSI T1,FSP+.FOFPP ;POINT TO START OF PATH
HRRI T1,PTHBLK ;WHERE TO PUT IT
BLT T1,PTHBLK+7-1 ;COPY PATH
JRST CPOPJ1 ;RETURN
GETBYT: SOSGE IBR+.BFCTR ;COUNT BYTES
JRST GETBY1 ;BUFFER EMPTY
ILDB T1,IBR+.BFPTR ;GET A BYTE
MOVEM T1,LSTBYT ;SAVE AS LAST BYTE
JRST CPOPJ1 ;AND RETURN
GETBY1: IN IOC, ;READ A BUFFER IN
JRST GETBYT ;LOOP BACK
GETSTS IOC,T1 ;GET CHANNEL STATUS
TRNE T1,IO.EOF ;END OF FILE?
POPJ P, ;YES
PJRST INPERR ;ELSE INPUT ERROR
PUTBYT: SOSGE OBR+.BFCTR ;COUNT BYTES
JRST PUTBY1 ;BUFFER FULL
IDPB T1,OBR+.BFPTR ;SAVE A BYTE
JRST CPOPJ1 ;AND RETURN
PUTBY1: OUT IOC, ;WRITE BUFFER OUT
JRST PUTBYT ;LOOP BACK
GETSTS IOC,T1 ;GET CHANNEL STATUS
HALT .
OCTIN: PUSH P,T3 ;SAVE T3
PUSH P,T4 ;SAVE T4
SETZB T3,T4 ;INIT RESULT
OCTIN1: PUSHJ P,GETBYT ;GET A CHARACTER
JRST OCTIN3 ;EOF
CAIL T1,"0" ;RANGE
CAILE T1,"7" ; CHECK
JRST OCTIN2 ;ALMOST DONE
LSHC T3,3 ;SHIFT
ADDI T4,-"0"(T1) ;INCLUDE DIGIT
JRST OCTIN1 ;LOOP
OCTIN2: DMOVE T1,T3 ;GET DOUBLEWORD RESULT
OCTIN3: POP P,T4 ;RESTORE T4
POP P,T3 ;RESTORE T3
JRST CPOPJ1 ;RETURN
SAVBLT: PHASE .JBBLT
SAVE. 0, ;(.JBBLT+0) SAVE PROGRAM
HALT . ;(.JBBLT+1) FAILED
EXIT ;(.JBBLT+2) RETURN TO MONITOR
DEPHASE
SAVCOD: PHASE 0
XWD .PAGCD,PAGBLK ;(00) PAGE. UUO AC
SAVGO:! PAGE. 0, ;(01) DELETE UCODE LOADER
HALT . ;(02) FAILED
MOVEI 0,SAVBLK ;(03) POINT TO SAVE. UUO ARGUMENT
JRST .JBBLT ;(04) DO SAVE AND EXIT
EXP 0 ;(05) FREE
PAGBLK:!EXP -<LOADPG-1> ;(06) PAGE. UUO ARGUMENT (KEEP PAGE 0)
EXP PA.GAF+1 ;(07) PAGE. UUO ARGUMENT
SAVBLK:!SIXBIT /DSK/ ;(10) DEVICE
SIXBIT /BOOT/ ;(11) FILE NAME
SIXBIT /EXE/ ;(12) EXTENSION
EXP 0 ;(15) MBZ
EXP 0 ;(16) PPN
EXP 0 ;(17) CORE
DEPHASE
LOADFF: BLOCK 1 ;ADDRESS OF FIRST FREE LOCATION
BINFLG: BLOCK 1 ;BINARY FILE OUTPUT FLAG
UCODSA: BLOCK 1 ;UCODE STARTING ADDRESS
UCODWD: BLOCK 1 ;UCODE WORD COUNT
UCODCK: BLOCK 1 ;UCODE CHECKSUM
UCODVR: BLOCK 1 ;UCODE VERSION NUMBER (TEMPORARY)
UCODBF: BLOCK UCDSIZ ;UCODE STORAGE BUFFER (TEMPORARY)
QPTR: BLOCK 1 ;BYTE POINTER TO QUESTION BUFFER
QCTR: BLOCK 1 ;BYTE COUNTER TO QUESTION BUFFER
QBUF: BLOCK QWDS ;QUESTION BUFFER
LSTBYT: BLOCK 1 ;SAVE BYTE READ FROM FILE
F.ZBEG:! ;START OF FILE AREA TO CLEAR
FOP: BLOCK .FOMAX ;FILOP BLOCK
LEB: BLOCK .RBMAX ;LOOKUP/ENTER BLOCK
FSP: BLOCK .FOFMX ;RETURNED FILESPEC BLOCK
OBR: BLOCK 3 ;OUTPUT BUFFER RING HEADER
IBR: BLOCK 3 ;INPUT BUFFER RING HEADER
OBF: BLOCK 203 ;OUTUT DISK BLOCK
IBF: BLOCK 203 ;INPUT DISK BLOCK
F.ZEND:! ;END OF FILE AREA TO CLEAR
EXBSTA: BLOCK 1 ;EXB START ADDRESS FLAG
EXBLDA: BLOCK 1 ;EXB LOAD ADDRESS
EXBPTR: BLOCK 1 ;EXB CORE IMAGE BYTE POINTER
RECPTR: BLOCK 1 ;EXB RECORD BUFFER BYTE POINTER
RECCNT: BLOCK 1 ;EXB RECORD BYTE COUNT
RECBUF: BLOCK EXBWDS ;EXB RECORD BUFFER
LDRLIT: LIT
LOADEN:! ;END OF THE LOADER
LOADSZ==<LOADEN-LOADER>+.JBDA ;LOADER SIZE IN WORDS
LOADPG==<LOADSZ+PAGSIZ-1>/PAGSIZ ;LOADER SIZE IN PAGES
SUBTTL DATA AREAS
;THE DATA AREA MUST BE THE FIRST THING IN THIS PROGRAM THAT GENERATES
;CODE TO INSURE THAT IT STARTS ON A PAGE BOUNDARY. IN ADDITION,
;THE EPT MUST BE THE FIRST THING IN THE DATA AREA FOLLOWED IMMEDIATELY
;BY THE BLOCKS FOR HOM, RIB, AND BUF, FOR THE SAME REASON. NOTE
;THAT IF ANY OF THE LAST THREE BLOCKS ARE SPLIT ACROSS A PAGE BOUNDARY
;THE I/O SUBROUTINES WILL NOT (NECESSARILY) WORK.
RELOC .VBOOT-.JBDA
BTSVEC:
LV (NAM,<SIXBIT/BOOT/>) ;IDENTIFIER
LV (VER,<%%BTS>) ;BOOT VERSION
LV (STA,<JRST BOOT>) ;BOOT START ADDRESS (FOR DEBUGGING)
LV (DDT,<JRST DDT##>) ;DDT START ADDRESS
LV (BPT,<JSR $0BPT##>) ;DDT ENTRY VIA UNSOLICITED BREAKPOINT
LV (DSP,<SUBR-BTSVEC>) ;SUBROUTINE OFFSET FROM ORIGIN
LV (SAV,<.BTSVE-.BTSVB>) ;NUMBER OF SAVED DATA ITEMS
LV (DAT,<<-DATLEN,,<SUBDAT-BTSVEC>>>) ;-LENGTH,,OFFSET TO DATA FOR SUBR
LV (XPC,<0,0,1B6,0>) ;XPCW ENTRY POINT
LV (SSL,<<-^D36,,.BTSSL+1>>) ;-LENGTH,,OFFSET TO THE SSL
LV (ASL,<<-^D8,,.BTASL+1>>) ;-LENGTH,,OFFSET TO THE ASL
LV (SDL,<<-^D36,,.BTSDL+1>>) ;-LENGTH,,OFFSET TO THE SDL
LV (MSZ,<MEMPSZ-BTSVEC>) ;OFFSET TO MEMORY SIZE IN P
LV (NXM,<<-NXMLEN,,<NXMTAB-BTSVEC>>>) ;-LENGTH,,OFFSET TO NXMTAB
.ORG BTSVEC+<.BTVLN*PAGSIZ> ;ROUND UP TO THE NEXT PAGE BOUNDRY
EPTABS: ;UNMAPPED ADDRESS OF EPT
EPTOFS==EPTABS-.VBOOT ;EPT OFFSET FROM BOOT ORIGIN IN WORDS
EPTPAG==EPTOFS/PAGSIZ ;EPT OFFSET FROM BOOT ORIGIN IN PAGES
BLK(EPT,0) ;PUT THIS HERE SO IT STARTS ON A PAGE BOUNDARY
ONE41 (0,417) ;0-417=PAGES 0-417 IN EXEC MAP
BLOCK 1 ;420=UNUSED ON KL OR KS
JFCL ;421=ARITHMETIC OVERFLOW TRAP INSTRUCTION
JRST TRAP ;422=PDL OVERFLOW TRAP INSTRUCTION
JRST TRAP ;423=TRAP 3 TRAP INSTRUCTION
BLOCK 4 ;424-427 MUUO LOCATIONS
INSLOC (430,437,<EXP TRAP>) ;430-437=MUUO NEW PC WORDS
...Z4==.
CPYRIT:!CPYTXT ;PUT THE COPYRIGHT TEXT HERE
.ORG ...Z4
BLOCK 40 ;440-477=UNUSED
BLOCK 2 ;500-501=PAGE FAIL LOCATIONS ON KL AND KS
EXP PFTRAP ;502=NEW PC WORD ON KL AND KS
EXP PFTRAP ;503=REAL PAGE FAIL NEW PC WITH KL PAGING
ONE41 (504,537) ;504-537=PAGES 504-537 IN EXEC MAP
ONE41 (EPTABS/PAGSIZ,EPTABS/PAGSIZ) ;540=POINTER TO SECTION 0 PAGE TABLE
ONE41 (541,777) ;541-777=PAGES 541-777 IN EXEC MAP
DATA:! ;START OF IMPURE DATA STORAGE
R.BEG:! ;FIRST ADDRESS OF DATA TO ZERO ON RESTART
BLK(HOM,BLKSIZ) ;HOM BLOCK FOR CURRENT UNIT
BLK(RIB,BLKSIZ) ;RIB BLOCK FOR CURRENT FILE
BLK(BUF,BLKSIZ) ;WORK BUFFER
BLK(SCR,BLKSIZ) ;REBOOT SCRATCH BUFFER
SWTVLV:
BLK(SWTVAL,0) ;START OF BLOCK OF SWITCH VALUES
BLK(STSA,1) ;START ADDRESS GIVEN IN /START
SWTVLL==.-SWTVLV
IFN FTTAPE,<
BLK(TAPIDX,1) ;MAGTAPE UNIT INDEX
BLK(TAPUNI,1) ;MAGTAPE UNIT NUMBER
BLK(TAPDEN,1) ;MAGTAPE DENSITY CODE (1=200 BPI, ..., 5=6250 BPI)
>; END IFN FTTAPE
R.END:! ;LAST ADDRESS TO ZERO ON RESTART
BLK(FILSPC,0) ;FIRST WORD CLEARED EACH TIME THROUGH PARSE
BLK(DEV,1) ;DEVICE NAME
BLK(FILNAM,1) ;FILENAME
BLK(EXT,1) ;EXTENSION
BLK(PTHBLK,7) ;PATH BLOCK
BLK(CPEBR,1) ;ARGUMENT TO CHANGE THE EPT TO IT'S CURRENT VALUE
BLK(CPCLL,1) ;CACHE STRATEGY FROM KLI/MONITOR (KL ONLY)
IFN FTTAPE,<
BLK(NOTAPE,1) ;FLAG NON-ZERO IF MAGTAPE DRIVERS HAVE BEEN DISCARDED
>; END IFN FTTAPE
Z.BEG:! ;FIRST ADDRESS TO ZERO AT INITIALIZATION
BLK(EPTADR,1) ;PHYSICAL ADDRESS OF OUR EPT
BLK(BTBOT,1) ;FIRST PHYSICAL ADDRESS USED BY BOOT
BLK(BTTOP,1) ;FIRST PHYSICAL ADDRESS BEYOND TOP OF BOOT
BLK(SUBREL,1) ;SUBROUTINE RELOCATION
BLK(SUBDAT,DATLEN) ;SUBROUTINE DATA STORAGE
BLK(ERRFLG,1) ;SUBROUTINE ERROR OCCURED IF NON-ZERO
BLK(CPUBR,1) ;ARGUMENT TO RESTORE THE UPT AS IT WAS ON ENTRY
IFN FTKL10,<
BLK(CPDTE,1) ;CONI DTE, ON SUBROUTINE CALLS
>
IFN FTKS10,<
BLK(CPHSB,1) ;RDHSB ON SUBROUTINE CALLS
BLK(CPAPR,1) ;CONI APR, ON SUBROUTINE CALLS
>
BLK(MEMPSZ,1) ;NUMBER OF PAGES IN MEMORY
BLK(TRPADR,1) ;ADDRESS OF WHERE TO GO ON A TRAP
BLK(LUNPOS,1) ;LOGICAL UNIT NUMBER WITHIN STR
BLK(DRVBPC,1) ;BLOCKS/CYLINDER ON THIS UNIT \*** KEEP
BLK(DRVBPT,1) ;BLOCKS/TRACK ON THIS UNIT /*** TOGETHER
BLK(SDLPOS,1) ;POSITION IN SYSTEM DUMP LIST
BLK(BLKCNT,1) ;NUMBER BLOCKS LEFT IN THIS GROUP
BLK(BLKADR,1) ;CURRENT BLOCK ADDRESS
BLK(BLKNUM,1) ;CURRENT RELATIVE BLOCK NUMBER IN FILE
BLK(SAVFIR,1) ;COPY OF RIBFIR FROM CURRENT RIB
BLK(SAVSIZ,1) ;COPY OF RIBSIZ FROM CURRENT RIB
BLK(SAVEAC,20) ;SAVE AC'S HERE IN BUGDMP
IFN FTKL10,<
BLK(R2IOWD,R2IOWL) ;RH20 IOWDS
>
IFN FTKS10,<
BLK(MAPBLK,40) ;SAVE UBA MAP REGISTERS
>
BLK(USRFLG,1) ;USER MODE FLAG
BLK(CDFLG,1) ;CONTROL-D FLAG
BLK(CDSAV,20) ;SAVED ACS FOR CONTROL-D
BLK(CD112,1) ;SAVED MONITOR LOCATION 112
BLK(CD116,1) ;SAVED MONITOR LOCATION 116
BLK(CD117,1) ;SAVED MONITOR LOCATION 117
BLK(BTSPDL,PDLLEN) ;PUSH DOWN LIST
BLK(CMDPTR,1) ;BYTE POINTER TO COMMAND BUFFER
BLK(CMDBUF,LINBFL) ;COMMAND LINE BUFFER
BLK(BTXPTR,1) ;BYTE POINTER TO BOOTXT
BLK(AUTFLG,1) ;AUTO-BOOT FLAG
BLK(NXMFLG,1) ;NXMTAB VALID FLAG
BLK(NXMTAB,NXMLEN) ;OUR COPY OF NXMTAB
Z.END:! ;LAST ADDRESS TO ZERO AT INITIALIZATION
SUBTTL BOOTSTRAP INITIALIZATION
;HERE AFTER BEING LOADED INTO MEMORY. WE ARE (PROBABLY) RUNNING
;UNPAGED AT THIS POINT SO WE MUST DO SOMETHING ABOUT THAT FIRST.
BOOT:
IFN FTKL10,<
TDZA S,S ;NO BITS SPECIFIED
JFCL ;DON'T TOUCH - 20F SET UP S
;PRESERVE S UNTIL WE CAN REFERENCE MEMORY
>
CONO APR,APRRST ;BLAST THE PROCESSOR
CONO PI,PI.CPI!PI.OFF ;BLAST THE PI SYSTEM
REPEAT 0,<
;THIS DOESN'T WORK AND SHOULD NEVER BE REQUIRED SINCE KLI ALREADY DID IT
IFN FTKLP,<
CONO PAG,0 ;ZAP
MOVSI T1,(1B0+0B8+6B11) ;AC BLOCK 6
JRSTF @[4000,,.+1] ;MAKE SURE CAN ADDRESS PREVIOUS CONTEXT
DATAO PAG,T1 ;PREVIOUS CONTEXT ACS
EXCTUX <SETZM 2> ;CLEAR CST BASE
>
>;END REPEAT 0
IFN FTKL10,<
CONI PAG,T3 ;READ CACHE STRATEGY
ANDI T3,LG.CSL!LG.CSW ;ISOLATE CACHE STRATEGY BITS
MOVEI T1,XG.TEN!<EPTABS/PAGSIZ>!XG.KLP ;GET BITS TO SET THE EBR
MOVSI T4,(XG.LAB!LG.LPC!XG.LUB) ;FLAG BITS TO LOAD THE UBR
HRRI T4,LG.IAM!<EPTABS/PAGSIZ> ;AND THE PAGE NUMBER
CONO PAG,(T1) ;TURN ON PAGING, MAP US 1 FOR 1
DATAO PAG,T4 ;SET THE UPT TO THE SAME PAGE
CONO DTE0,PILDEN!0 ;TURN OFF DTE PIA
>
IFN FTKS10,<
SETZB T1,T3 ;CLEAR AC, NO CACHE STRATEGY ON KS
CONO PAG,(T1) ;TURN OFF PAGING
WRCSB T1 ;CLEAR CST BASE ADDRESS (REQUIRES UCODE 124)
MOVEI T1,XG.TEN!<EPTABS/PAGSIZ>!XG.KLP ;GET BITS TO SET THE EBR
MOVSI T4,(XG.LAB!XG.LUB) ;FLAG BITS TO LOAD THE UBR
HRRI T4,<EPTABS/PAGSIZ> ;AND THE PAGE NUMBER
CONO PAG,(T1) ;TURN ON PAGING, MAP US 1 FOR 1
DATAO PAG,T4 ;SET THE UPT TO THE SAME PAGE
MOVEI T2,.EPHSB ;GET HALT STATUS BLOCK ADDRESS
WRHSB T2 ;WRITE IT
>
MOVEM T1,CPEBR ;STORE BITS TO CHANGE EBR FOR LATER
MOVEM T3,CPCLL ;SAVE CACHE STRATEGY FROM KLI
MOVSI T2,(<PM.DCD>B2+PM.WRT) ;ACCESSIBLE AND WRITABLE
MOVEM T2,EPT+.MPAG0 ;MAP PAGE 0
MOVEM T2,EPT+.MPAG0+1
AOS EPT+.MPAG0+1 ;AND PAGE 1
MOVEI T2,.VBOOT ;GET STARTING PHYSICAL ADDRESS
MOVEM T2,BTBOT ;STORE AS BOTTOM OF BOOT
HRRZ T3,.VBOOT+.BTSIZ ;GET +SIZE IN WORDS
ADD T2,T3 ;GET TOP+1
MOVEM T2,BTTOP ;STORE FOR LATER
MOVEI T2,EPTABS ;GET PHYSICAL ADDRESS OF OUR EPT
MOVEM T2,EPTADR ;STORE FOR LATER
LSH T2,W2PLSH ;CONVERT TO PAGE NUMBER
HRLI T2,(<PM.DCD>B2+PM.WRT) ;ACCESSIBLE + WRITABLE
MOVEM T2,EPT+540 ;SETUP SECTION TABLE TO POINT AT SECTION 0 PT
IFN FTKL10,<SETZM EPT+DTEEPW> ;CLEAR EXAMINE/PROTECTION WORD
MOVE T2,CHGEBR ;GET INSTRUCTION TO CHANGE THE EBR
MOVSI T3,(JRST) ;SETUP JRST TO GET BACK AFTER
HRRI T3,MAPPED ; WE'RE MAPPED
JRST T2 ;CHANGE THE EBR, COME BACK MAPPED
;HERE WHEN THE .VBOOT ADDRESS SPACE HAS BEEN MAPPED TO DO SOME ONCE
;ONLY INITIALIZATION
MAPPED: MOVEI P,BTSPDL ;SETUP A PDL
IFN FTKL10,<
SETZM EPT+DTEEPW ;CLEAR DTE EXAMINE/PROTECTION WORD
SETZM EPT+DTEMTI ;CLEAR INPUT READY FLAG
MOVSI T3,DT.ESP ;BIT TO CAUSE -20F TO ENTER SECONDARY
HRRI T3,DTEFLG ;IN THIS WORD
PUSHJ P,DODTE ;EXECUTE THE COMMAND
PUSHJ P,ZAPICH ;FORCIBLY BLAST INTERNAL CHANNELS
>
MOVE T1,[Z.BEG,,Z.BEG+1] ;SET UP BLT
SETZM Z.BEG ;CLEAR FIRST WORD
BLT T1,Z.END-1 ;CLEAR ENTIRE DATA BASE
IFN FTKS10,<
SETZM .VPAG0+CTYIWD ;CLEAR INPUT AVAILABLE WORD
SETZM .VPAG0+CTYOWD ;AND OUTPUT PRESENT WORD
SETZM .VPAG0+KLIIWD ;BE SURE KLINIK LINE COMMANDS
SETZM .VPAG0+KLIOWD ;CAN'T MAKE 8080 HANG IF TRASH FROM SAVE.
HRRZ S,.VPAG0+RLWORD ;GET FLAGS FROM 8080
TRNE S,FORREL ;IF FORCED RELOAD
TLO S,(KL.SIL!KL.DMP) ;WE WANT A DUMP/SILENT LOAD
TRNE S,AUTOBT ;IF AN AUTO-BOOT
TLO S,(KL.SIL) ;JUST LOAD SILENTLY
HLLZS S ;KEEP ONLY KL-STYLE FLAGS
>
MOVEM S,AUTFLG ;SAVE WHAT WE ARE TOLD
MOVEI S,0 ;ZERO FLAGS
PUSHJ P,SUNXMT ;LOOK AT MEMORY AND SETUP NXMTAB
MOVEI T1,VERMSG ;POINT AT VERSION STRING
PUSHJ P,PRMSG ;TELL HIM THAT WE'RE HERE
PUSHJ P,COPDAT ;COPY DATA FROM OLD BOOT (SSL, ASL, SDL, ETC.)
PUSHJ P,FINDHI ;FIND PHYSICAL PAGE # OF TOP OF CORE
PUSHJ P,MOVBTS ;RELOCATE BOOT TO TOP OF PHYSICAL CORE
MOVEI T1,RESTAR ;GET RESTART ADDRESS
HRRM T1,BTSVEC+.BTSTA ;SAVE IT
SETOM CDFLG ;NOT A CONTROL-D
PUSHJ P,RICD ;ENTER DDT IF DEBUGGING
SKIPN T1,AUTFLG ;GET THE FLAGS FROM THE FE
JRST RESTAR ;IF NONE, ASK OPR
PUSHJ P,DEFSPC ;DEFAULT THE FILE-SPEC
TLZE T1,(KL.DMP) ;NEED A DUMP?
PUSHJ P,DODUMP ;YES -- DO ONE
PUSHJ P,DEFSPC ;RE-DEFAULT FOR LOAD
MOVE T1,[BTSVEC+.BTDEV,,DEV] ;SET UP BLT
SKIPE BTSVEC+.BTDEV ;HAVE A FILESPEC FROM BEFORE?
BLT T1,PTHBLK+6 ;COPY IT
.CREF KL.SIL ;BIT WE'RE TESTING
SKIPL AUTFLG ;A SILENT LOAD?
PJRST RESTAR ;NO, ASK OPR
PJRST RLDMO2 ;YES, DO SO
DEFSPC: SETZM R.BEG ;DEFAULT THE WORLD
MOVE T2,[R.BEG,,R.BEG+1] ;SET UP BLT
BLT T2,R.END-1 ;ZERO DATA STORAGE
MOVE T2,[FILSPC,,FILSPC+1]
SETZM FILSPC
BLT T2,PTHBLK+6
MOVSI T2,'EXE' ;DEFAULT EXTENSION
MOVEM T2,EXT
MOVE T2,[XWD 1,4] ;DEFAULT PPN
MOVEM T2,PTHBLK
MOVSI S,(FL.WLD) ;ANY STRUCTURE
POPJ P, ;DONE
; SUBROUTINE ENTRY
SUBR: MOVSI 17,(JRST (16)) ;RETURN INSTRUCTION FOR JSR
JSR 16 ;FIND OUT WHERE WE ARE
XMOVEI 17,0-.(16) ;OFFSET FOR RELOCATED LOADING TO ORIGINAL SPOT
MOVEM 0,SAVEAC(17) ;SAVE CALLER'S AC 0
MOVSI 0,1 ;START WITH AC 1
HRRI 0,SAVEAC+1(17) ;SET UP BLT
MOVEI 16,SAVEAC+15(17) ;COMPUTE END OF BLT
BLT 0,(16) ;SAVE CALLER'S ACS 1-15
MOVE R,17 ;SET RELOCATION AC
MOVEM R,SUBREL(R) ;SAVE SUBROUTINE RELOCATION FOR RETURN
JSP P1,SAVHDW(R) ;SAVE HARDWARE STATUS
JSP P1,SETMAP(R) ;RESET POINTERS IN OUR EPT
MOVE T1,EPTADR(R) ;GET PHYSICAL EPT ADDRESS
LSH T1,W2PLSH ;CONVERT TO A PAGE NUMBER
TRO T1,XG.TEN!XG.KLP ;WORD TO CHANGE THE EBR
IFN FTKL10,<
MOVEI T4,LG.IAM(T1) ;GET UPT PAGE NUMBER AND FLAG
HRLI T4,(XG.LUB) ;FLAG BITS TO LOAD THE UBR
>
IFN FTKS10,<
MOVE T4,T1 ;GET UPT PAGE NUMBER
HRLI T4,(XG.LAB!XG.LUB) ;FLAGS TO LOAD THE UBR
>
MOVE P1,CHGEBR(R) ;GET INSTRUCTION TO CHANGE THE EBR
MOVE P2,CHGUBR(R) ;GET INSTRUCTION TO CHANGE THE UBR
MOVE P3,[JRST @P4](R) ;SETUP JRST TO GET BACK AFTER WE'RE MAPPED
MOVEI P4,SUBR1 ;RETURN TO 0,,SUBR1
JRST P1 ;CHANGE THE EBR AND UBR, COME BACK MAPPED
SUBR1: MOVE P,[IOWD PDLLEN,BTSPDL] ;SET UP A STACK
SETZM ERRFLG ;CLEAR ERROR FLAG
MOVE T1,BTSVEC+.BTCPN ;GET NUMBER OF CPU WHICH INVOKED BOOT
LDB T1,BTYCST(T1) ;GET THAT CPU'S SAVED CACHE STRATEGY
DPB T1,[POINT 2,CPCLL,19] ;SAVE FOR POSSIBLE RELOAD
PUSHJ P,DEFSPC ;DEFAULT THE FILESPEC
MOVE T1,BTSVEC+.BTFNC ;GET FUNCTION CODE
CAILE T1,DISPLN ;KNOWN?
MOVEI T1,0 ;NO--ERROR
SKIPG DISP(T1) ;PRESERVE NXMTAB?
SETZM NXMFLG ;NXMTAB NOT VALID (CAN'T TRUST MONITOR)
PUSHJ P,@DISP(T1) ;DISPATCH
MOVE R,SUBREL ;GET RELOCATION BACK
MOVE T1,CPEBR ;GET OLD EBR
MOVE T4,CPUBR ;AND OLD UBR
MOVE P1,CHGEBR ;GET INSTRUCTION TO CHANGE THE EBR
MOVE P2,CHGUBR ;GET INSTRUCTION TO CHANGE THE UBR
IFN FTKL10,<MOVE P3,[XJRST P4]> ;GET INSTRUCTION TO RETURN TO RELOCATED ADDRESS
IFN FTKS10,<MOVE P3,[JRST @P4]> ;GET INSTRUCTION TO RETURN TO RELOCATED ADDRESS
MOVEI P4,SUBR2(R) ;GET LOCAL RELOCATED ADDRESS
HLL P4,R ;MAKE IT GLOBAL
JRST P1 ;CHANGE BACK TO OLD EBR AND UBR
SUBR2: JSP P1,RSTHDW(R) ;RESTORE THE STATE OF THE HARDWARE
SKIPN ERRFLG(R) ;ERROR ALONG THE WAY?
AOS BTSVEC+.BTXPC+1(R) ;NO--GIVE SKIP RETURN
MOVE 17,R ;COPY RELOCATION
MOVSI 15,SAVEAC(17) ;SET UP BLT
BLT 15,15 ;RESTORE ACS 0-15
XJRSTF BTSVEC+.BTXPC(17) ;RETURN TO CALLER
;BYTE POINTERS FOR SAVED CACHE STRATEGY
BTYCST: POINT 2,BTSVEC+.BTSCS,35 ;FOR CPU0
POINT 2,BTSVEC+.BTSCS,33 ;FOR CPU1
POINT 2,BTSVEC+.BTSCS,31 ;FOR CPU2
POINT 2,BTSVEC+.BTSCS,29 ;FOR CPU3
POINT 2,BTSVEC+.BTSCS,27 ;FOR CPU4
POINT 2,BTSVEC+.BTSCS,25 ;FOR CPU5
;SUBROUTINE DISPATCH TABLE
DISP: XWD 400000,ILLFNC ;ILLEGAL FUNCTIONS
XWD 400000,RESTAR ;FUNCTION 1 - BOOT RESTART (DO NOT LOAD)
XWD 0,DODUMP ;FUNCTION 2 - DUMP
XWD 400000,RELOAD ;FUNCTION 3 - LOAD (READ BOOTXT)
XWD 0,SLFUNC ;FUNCTION 4 - SYSTEM SLEEP DUMP
XWD 0,PGFUNC ;FUNCTION 5 - PAGE REPLACE
DISPLN==.-DISP ;LENGTH OF TABLE
ILLFNC: SETOM ERRFLG ;FLAG THE ERROR
MOVEI T1,[ASCIZ /
?BOOT error; illegal function code
/]
PUSHJ P,PRMSG ;PRINT TEXT
MOVE T1,BTSVEC+.BTFNC ;GET OFFENDING FUNCTION CODE
PJRST PROCT ;PRINT IT AND RETURN
; SAVE HARDWARE STATUS ON SUBROUTINE ENTRY
; CALL: JSP P1,SAVHDW(R)
SAVHDW:
IFN FTKL10,<
SWPUA ;SWEEP CACHE
CONSO APR,LP.CSD ;DONE YET?
JRST .-1(R) ;NO--WAIT
CONI PAG,CPEBR(R) ;SAVE CURRENT EPT MAPPING
DATAI PAG,CPUBR(R) ;SAVE CURRENT UPT MAPPING
CONI DTE0,CPDTE(R) ;SAVE CURRENT DTE PIA
CONO DTE0,PILDEN!0 ;ZAP DTE PIA
SETZM EPT+DTEEPW(R) ;AND THE EXAMINE/PROTECTION WORD
>
IFN FTKS10,<
CONI PAG,CPEBR(R) ;SAVE CURRENT EPT MAPPING
DATAI PAG,CPUBR(R) ;SAVE CURRENT UPT MAPPING
CONI APR,CPAPR(R) ;SAVE CURRENT APR PI ASSIGNMENT
RDHSB CPHSB(R) ;SAVE CURRENT HALT STATUS BLOCK
HRLZ T1,DVCTAB(R) ;UBA NUMBER FOR DISK
MOVEI T2,MAPBLK(R) ;ADDRESS OF SAVE AREA
HRLI T2,(POINT 18) ;MAKE A BYTE POINTER
SVMAP1: TRNE T1,100 ;DONE?
JRST SVMAP2(R) ;YES
RDIO T3,SO.UPR(T1) ;READ MAP REGISTER
LSHC T3,-^D20 ;CONVERT READ FORMAT TO WRITE
LSH T3,-4
LSHC T3,^D11
IDPB T3,T2 ;STORE IT
AOJA T1,SVMAP1(R) ;LOOP
SVMAP2:
>
JRST (P1) ;RETURN
; RESTORE HARDWARE STATUS ON SUBROUTINE EXIT
; CALL: JSP P1,RSTHDW(R)
RSTHDW:
IFN FTKL10,<
HRRZ T1,CPDTE(R) ;RESTORE DTE PIA
ANDI T1,PI0ENB!PIA ;KEEP JUST USEFUL BITS
CONO DTE0,PILDEN(T1)
>
IFN FTKS10,<
HRLZ T1,DVCTAB(R) ;UBA NUMBER FOR DISK
MOVEI T2,MAPBLK(R) ;ADDRESS OF SAVE AREA
HRLI T2,(POINT 18) ;MAKE A BYTE POINTER
RSMAP1: TRNE T1,100 ;DONE?
JRST RSMAP2(R) ;YES
ILDB T3,T2 ;GET ORIGINAL VALUE
WRIO T3,SO.UPR(T1) ;PUT IT BACK
AOJA T1,RSMAP1(R) ;LOOP
RSMAP2: MOVE T1,CPHSB(R) ;GET HALT STATUS BLOCK ADDRESS
WRHSB T1 ;RESTORE IT
MOVE T1,CPAPR(R) ;GET CONI APR,
ANDI T1,7 ;KEEP JUST PI ASSIGNMENT
CONO APR,(T1) ;RESTORE APR PI ASSIGNMENT
>
JRST (P1) ;RETURN
; SET UP THE EPT/UPT ON SUBROUTINE ENTRY
; CALL: JSP P1,SETMAP(R)
SETMAP: XMOVEI T1,BTSVEC(R) ;GET CURRENT VIRTUAL ORIGIN
MAP T1,(T1) ;TRANSLATE TO PHYSICAL
IFN FTKL10,<TLZ T1,(^-<LG.EPT*PAGSIZ+PAGSIZ-1>)> ;KEEP ONLY ADDRESS
IFN FTKS10,<TLZ T1,(^-<SG.EPT*PAGSIZ+PAGSIZ-1>)> ;KEEP ONLY ADDRESS
MOVEM T1,BTBOT(R) ;SAVE PHYSICAL START OF BOOT
HRRZ T2,BTSVEC+.BTSIZ(R) ;GET SIZE IN WORDS
ADD T2,T1 ;GET FIRST ADDRESS BEYOND BOOT
MOVEM T2,BTTOP(R) ;SAVE THAT
ADDI T1,EPTOFS ;OFFSET TO THE EPT
MOVEM T1,EPTADR(R) ;SAVE PHYSICAL ADDRESS OF THE OUR EPT
LSH T1,W2PLSH ;CONVERT TO A PAGE NUMBER
HRRM T1,EPT+540(R) ;SAVE SECTION 0 MAP POINTER
SUBI T1,EPTPAG ;BACK TO THE BOOT ORIGIN PAGE
HLLZ T2,BTSVEC+.BTSIZ(R) ;GET -LENGTH OF BOOT IN PAGES
HRRI T2,EPT+.MBOOT(R) ;MAKE AN AOBJN POINTER
HRRM T1,(T2) ;STUFF PAGE NUMBER IN MAP
AOS T1 ;ADVANCE
AOBJN T2,.-2(R) ;LOOP FOR ALL OUR PAGES
JRST (P1) ;RETURN
SUBTTL PROCESS COMMAND
;ROUTINE TO PROMPT THE USER AND DUMP/LOAD/RELOAD THE MONITOR. CALL
;AFTER SETTING UP THE MAP SO THAT WE ARE RUNNING IN THE .VBOOT ADDRESS
;SPACE. EXITS TO THE START ADDRESS OF THE NEW MONITOR.
RESTAR: SETZM SUBDAT ;INVALIDATE POSSIBLE BOOTXT
PUSHJ P,DEFSPC ;DEFAULT THE FILESPEC
RELOAD: MOVE T1,[POINT 7,SUBDAT] ;POINT TO DATA BUFFER (COPY OF BOOTXT)
MOVEM T1,BTXPTR ;SAVE FOR PARSE
RELOA1: SKIPN SUBDAT ;HAVE ANY DATA?
RLDMON: TLO S,(FL.DEF!FL.CMD) ;NO DEFAULTS AND READ FROM COMMAND BUFFER
TDZ S,[FX.CLR] ;CLEAR LOTS OF BITS
MOVEI P,BTSPDL ;SETUP PDL AGAIN IN CASE OF TRAP
SETZM AUTFLG ;IF ERROR, ALLOW TALKING TO OPR
;<MATCH ANGLE BRACKET ON NEXT LINE
MOVEI T1,[ASCIZ/BOOT>/] ;OUR PROMPT
MOVEI T2,[0] ;DEFAULT ANSWER IS CR
TLNE S,(FL.CMD) ;READING FROM COMMAND BUFFER?
PUSHJ P,REDLIN ;YES--PROMPT AND GET A COMMAND
PUSHJ P,PARSE ;PARSE THE COMMAND
JRST RESTAR ;SYNTAX ERROR
IFN FTTAPE,<
SKIPE W,TAPIDX ;SET UP DEVICE INDEX FOR LATER USE IF MAGTAPE
PUSHJ P,@RESTAB(W) ;FIND AND RESET THE CONTROLLER
TRNE S,FR.TAB ;ANY TAPE ACTION BITS SET?
JRST TAPACT ;YES
>; END IFN FTTAPE
TRNN S,FR.DMP ;/DUMP SEEN?
JRST RLDMO1 ;NO
IFN FTTAPE,<
SKIPE TAPIDX ;MAGTAPE UNIT SPECIFIED?
JRST NTDERR ;YES
>; END IFN FTTAPE
TLZE S,(FL.DDD) ;WANT TO SKIP /D?
TLNE S,(FL.CMD) ;AND READING FROM BOOTXT?
PUSHJ P,DODUMP ;NO TO EITHER, TAKE A DUMP
TLNN S,(FL.CMD) ;READING FROM BOOTXT?
JRST RELOA1 ;YES--PERHAPS NOT DONE WITH BOOTXT YET
JRST RESTAR ;JUST RESTART THINGS CLEANLY
RLDMO1: TRNE S,FR.STA ;/START SEEN?
TRNE S,FR.ALL-FR.STA ;AND NOTHING ELSE?
TLOA S,(FL.CMD) ;NO, READ NO MORE COMMANDS FROM BOOTXT
JRST RLDMO3 ;YES, JUST START UP MONITOR
;FALL INTO RLDMO2
RLDMO2: PUSHJ P,DOLOAD ;LOAD NEW MONITOR
JRST RESTAR ;ERROR DETECTED
TRNE S,FR.LOD ;/LOAD SPECIFIED?
JRST RLDMON ;YES, DON'T START
IFN FTTAPE,<
SKIPE TAPIDX ;DON'T POSITION TAPE UNLESS LOADED VIA TAPE
TRNE S,FR.NOR ;/NOREWIND?
JRST RLDMO3 ;DON'T TOUCH TAPE
PUSHJ P,REWIND ;REWIND THE TAPE
PUSHJ P,SKPEOF ;SKIP ONE FILE
IFN FTKS10,<
PUSHJ P,SKPEOF ;SKIP A SECOND FILE ON THE KS
>; END IFN FTKS10
>; END IFN FTTAPE
RLDMO3: TRNE S,FR.RBT ;THIS A /REBOOT REQUEST?
JRST RLDMO4 ;YES, DON'T CHANGE CORE
MOVE T1,[DEV,,BTSVEC+.BTDEV] ;SET UP BLT
BLT T1,BTSVEC+.BTPTH+6 ;COPY MONITOR FILESPEC INTO VECTOR
MOVE T1,EPT+.MBOOT ;GET MAP ENTRY FOR START OF BOOT
LSH T1,P2WLSH ;CONVERT TO A PHYSICAL ADDRESS
MOVEM T1,.VPAG0+BOOTSA ;SAVE FOR MONITOR
APRID T1 ;READ SERIAL NUMBER
ANDI T1,ASNMSK ;MASK DOWN TO ONLY THE SERIAL NUMBER
MOVEM T1,.VPAG0+BOOTWD ;SAVE FOR MONITOR
RLDMO4: PUSHJ P,LISTEN ;GIVE ONE MORE CHANCE TO CONTROL-C OUT
IFN FTTAPE,<
SKIPN NOTAPE ;TAPE DRIVER CODE STILL PRESENT?
PUSHJ P,ZAPTAP ;YES, DELETE IT SINCE MONITOR HAS NO USE FOR
; IT ONCE IT IS RUNNING
>; END IFN FTTAPE
SKIPN T4,STSA ;START ADDRESS SPECIFIED ON /START?
HRRZ T4,.VPAG0+.JBSA ;NO, USE ADDRESS FROM FILE
HRLI T4,(JRST) ;MAKE IT A JRST
MOVE T3,CHGEBR ;GET INSTRUCTION TO CHANGE THE EBR
MOVE T1,CPCLL ;GET CACHE STRATEGY BITS (KL), TURN OFF PAGING
MOVE S,AUTFLG ;PASS FLAGS TO MONITOR IN CASE IT CARES
JRST T3 ;TURN OFF PAGING AND START NEW MONITOR
CHGEBR: CONO PAG,(T1) ;CHANGE THE EBR
CHGUBR: DATAO PAG,T4 ;CHANGE THE UBR
;BUILD THE BOOT VERSION MESSAGE
VERMSG: VSTR (\BOOVER,\BOOEDT)
SUBTTL DUMP MONITOR
;ROUTINE TO DUMP THE SYSTEM. CALL WITH INITIAL FILESPEC ON
;WHICH TO DUMP IN THE FILESPEC AREA. ASKS THE USER FOR A NEW
;FILESPEC IF ERRORS ARE DETECTED.
;CALL: PUSHJ P,DODUMP
;RETURN+1 ALWAYS
SLFUNC: TLO S,(FL.DEF!FL.SSD) ;NO DEFAULTS, SYSTEM-SLEEP DUMP
PJRST DODUMP ;BUT MOSTLY NORMAL
ASKSTR: TDO S,[FL.1CM!FR.DMP] ;FORCE PARSE FROM COMMAND BUFFER AND /DUMP
MOVEI T1,[ASCIZ/File on which to dump: /]
MOVEI T2,[ASCIZ/DSK:CRASH.EXE[1,4]/]
TLNN S,(FL.SSD) ;IF THIS IS FOR A NORMAL DUMP,
TLZ S,(FL.DEF) ;MAKE SURE DEFAULTS ARE ALLOWED
PUSHJ P,REDLIN ;ASK WHERE HE WANTS THE DUMP
PUSHJ P,PARSE ;PARSE THE COMMAND
JRST ASKSTR ;TRY AGAIN
TLZ S,(FL.1CM) ;CLEAR COMMAND FLAG
TRNN S,FR.ALL-FR.DMP ;SEE ANYTHING AT ALL?
POPJ P, ;NO, LONE CR MEANS NO DUMP
DODUMP: SKIPN NXMFLG ;NXMTAB VALID?
PUSHJ P,SUNXMT ;MUST REBUILD IT
PUSHJ P,SDLCHK ;CHECK FOR THE SDL
SKIPA P1,['DSKA '-10000] ;GET DISK NAME TO INCREMENT TO DSKA
MOVE P1,T1 ;GET PREDECREMENTED AOBJN POINTER
MOVE T1,[SIXBIT/CRASH/] ;FILENAME IS CRASH
TRNN S,FR.FIL ;SEE A FILE NAME?
MOVEM T1,FILNAM ;NO, USE DEFAULT
TLNN S,(FL.WLD) ;WILD STR?
JRST DODUM4 ;NO, USE THE ONE HE SAID
DODUM1: TRNE S,FR.FRC ;/FORCE (IGNORE THE SDL)?
JRST DODUM2 ;YES
AOBJP P1,DODUM6 ;ADVANCE POINTER
SKIPN T1,(P1) ;GET A STRUCTURE NAME
AOBJN P1,.-1 ;NONE THERE, TRY NEXT
JUMPL P1,DODUM3 ;JUMP IF HAVE A STRUCTURE NAME
JRST DODUM6 ;GIVE UP
DODUM2: CAMN P1,[SIXBIT/DSKZ/] ;LOOKED AT THE LAST ONE?
JRST DODUM6 ;YES, GIVE UP
ADDI P1,10000 ;STEP TO NEXT DISK NAME
MOVE T1,P1 ;COPY STRUCTURE NAME
DODUM3: MOVEM T1,DEV ;ELSE STORE STR NAME TO TRY THIS TIME
DODUM4: TLZA S,(FL.OVW) ;DON'T ALLOW OVERWRITING
DODUM5: TLO S,(FL.OVW) ;OVERWRITE IF HE SAYS TO
TLZ S,FR.DMP ;CLEAR DUMP FLAG FOR NEXT TIME
PUSHJ P,DUMP ;TRY TO DUMP THE MONITOR
JRST DMPERR ;FAILED, ANALYZE ERROR AND TRY TO RECOVER
POPJ P, ;COMPLETED SUCCESSFULLY, RETURN
DODUM6: MOVEI T1,[ASCIZ/?Unable to find a file on which to dump
/]
PUSHJ P,PRMSG ;PRINT MESSAGE
TLNE S,(FL.SSD) ;SYSTEM SLEEP DUMP?
JRST ASKSTR ;YES, DON'T GIVE THEM A CHANCE TO BLOW IT
MOVEI T1,[ASCIZ/Do you want to keep this dump? /]
MOVEI T2,[ASCIZ/No/]
PUSHJ P,ASKYN ;ASK HIM WITH DEFAULT ANSWER
JRST DODUM6 ;CONFUSED USER--ASK AGAIN
POPJ P, ;HE SAYS NO
JRST ASKSTR ;ASK ON WHAT STR TO DUMP
; CHECK FOR THE EXISTANCE OF ANY STRUCTURES IN THE PRESERVED
; COPIES OF THE SYSTEM SEARCH LIST OR DUMP LIST
; CALL: PUSHJ P,SSLCHK/SDLCHK
; <NON-SKIP> ;TABLE EMPTY OR /FORCE SEEN
; <SKIP> ;USE TABLE, T1 = PREDECREMENTED POINTER
SSLCHK: SKIPA T1,BTSVEC+.BTSSL ;AOBJN POINTER TO SSL
SDLCHK: MOVE T1,BTSVEC+.BTSDL ;AOBJN POINTER TO SDL
ADDI T1,BTSVEC ;OFFSET TO START OF DESIRED TABLE
MOVE T2,T1 ;MAKE A WORKING COPY
ADJSP T1,-1 ;PREDECREMENT AOBJN POINTER FOR CALLER
TRNE S,FR.FRC ;/FORCE SEEN?
POPJ P, ;YES
SKIPN (T2) ;NON-ZERO ENTRY?
AOBJN T2,.-1 ;KEEP SEARCHING
JUMPL T2,CPOPJ1 ;RETURN IF FOUND A STRUCTURE
TRO S,FR.FRC ;NO--MUST FORCE SCANNING OF DSKA-DSKZ
POPJ P, ;RETURN
;HERE IF AN ERROR IS DETECTED IN THE DUMP OR LOAD. USE THE ERROR
;CODE RETURNED IN T1 TO INDEX INTO EMSTAB AND PRINT A MESSAGE.
;FOR DUMP, INDEX INTO DMPDSP AND DISPATCH TO THE ROUTINE TO
;HANDLE THE ERROR.
LODERR: TLOA S,(FL.CMD!FL.LDE) ;INSURE NEXT READ IS FROM TTY
DMPERR: TLZ S,(FL.LDE) ;CLEAR BIT FOR DUMP ERRORS
TLNE S,(FL.WLD) ;WILD STRUCTURE?
TLNE S,(FL.FFL) ;YES, DID WE FIND THE FILE ON THIS STR?
JRST DMPER1 ;YES, PROCEED NORMALLY
CAIG T1,FNFOFS ;NO, IS THIS ERROR JUST FILE OR STR NOT FOUND?
JRST DMPER2 ;YES, DON'T PRINT MESSAGE
DMPER1: PUSH P,T1 ;SAVE CODE FOR LATER
HRRZ T1,EMSTAB(T1) ;GET MESSAGE ADDRESS
PUSHJ P,PRMSG ;PRINT IT
PUSHJ P,PRFILE ;PRINT FILENAME
PUSHJ P,PRCRLF ;END THE LINE
POP P,T1 ;RESTORE ERROR CODE
DMPER2:
IFN FTKL10,<
CONSZ APR,LP.SBE!LP.NXM!LP.PAR ;NXM OR PARITY ERROR?
>
IFN FTKS10,<
CONSZ APR,SP.NXM!SP.HMP ;NXM OR PARITY ERROR?
>
JRST DMPER3 ;YES
TLNN S,(FL.LDE) ;SKIP IF LOAD ERROR
SKIPA T1,DMPDSP(T1) ;GET DISPATCH ADDRESSES FOR DUMP
MOVE T1,LODDSP(T1) ;DITTO FOR LOAD
TLNN S,(FL.WLD) ;DOING WILD STR?
MOVSS T1 ;YES, USE LH DISPATCH ADDRESSES
JRST (T1) ;GO RECOVER
;HERE ON A NXM OR PARITY ERROR DETECTED IN THE CONI APR TO PRINT THE
;APR STATUS AND GIVE UP.
DMPER3: MOVEI T1,[ASCIZ/?NXM or memory parity error detected/]
PUSHJ P,PRMSG ;TELL WHAT HAPPENED
PUSHJ P,PRTHDW ;PRINT APR, EBR, AND UBR STATUS
CONO APR,CLRAPR ;RESET THE BITS
TLO S,(FL.DEF!FL.CMD) ;NO DEFAULTS, READ FROM CTY
POPJ P, ;AND GIVE UP
;HERE ON A FATAL ERROR WHICH WILL RESTART BOOT AT "RESTAR"
;INVOKED VIA THE "ERROR" MACRO
FATERR: MOVEI T1,[ASCIZ /
%/]
PUSHJ P,PRMSG ;START ON A NEW LINE
HRRZ T1,@(P) ;GET TEXT ADDRESS
PUSHJ P,PRMSG ;PRINT IT
PUSHJ P,PRCRLF ;NEW LINE
PJRST RESTAR ;START OVER
;TABLE OF ERROR MESSAGES INDEXED BY THE ERROR CODE RETURNED IN T1.
;THE STRUCTURE NOT FOUND AND FILE NOT FOUND ERRORS MUST BE THE FIRST
;IN THE TABLE BEFORE THE LABEL FNFOFS SO THAT WE CAN AVOID PRINTING
;A FILE/STRUCTURE NOT FOUND MESSAGE FOR EVERY STRUCTURE WHEN THE
;OPERATOR SPECIFIES A WILD STRUCTURE NAME.
EMSTAB: [ASCIZ/%Structure not found for /]
[ASCIZ/%File not found /]
FNFOFS==.-EMSTAB-1
[ASCIZ/%Unprocessed dump on /]
[ASCIZ/%Unexpected end-of-file on /]
[ASCIZ\%I/O error on \]
[ASCIZ/%Bad directory format for /]
[ASCIZ/%Memory configuration too complicated for /]
[ASCIZ/%Not a REBOOTable dump /]
[ASCIZ/%Monitor extends past beginning of BOOT for /]
EMSTBL==.-EMSTAB
;DISPATCH TABLES INDEXED BY ERROR CODE. LH GIVES THE DISPATCH ADDRESS
;IF AN EXPLICIT STRUCTURE WAS GIVEN, RH GIVES THE DISPATCH ADDRESS IF
;THE STRUCTURE WAS WILD (DSKA-DSKZ)
DMPDSP: XWD ASKSTR,DODUM1 ;STRUCTURE NOT FOUND
XWD ASKSTR,DODUM1 ;FILE NOT FOUND
XWD STRFUL,DODUM1 ;UNPROCESSED DUMP
XWD ASKSTR,DODUM1 ;UNEXPECTED EOF
XWD ASKSTR,DODUM1 ;I/O ERROR
XWD ASKSTR,DODUM1 ;BAD DIRECTORY FORMAT
XWD ASKSTR,DODUM1 ;MEMORY CONFIGURATION TOO COMPLICATED
XWD ASKSTR,DODUM1 ;NOT A REBOOTABLE CRASH
XWD ASKSTR,DODUM1 ;MONITOR EXTENDS BEYOND BEGINNING OF BOOT
DMPDSL==.-DMPDSP
LODDSP: XWD CPOPJ,DOLOA1 ;STRUCTURE NOT FOUND
XWD CPOPJ,DOLOA1 ;FILE NOT FOUND
XWD CPOPJ,DOLOA1 ;UNPROCESSED DUMP
XWD CPOPJ,DOLOA1 ;UNEXPECTED EOF
XWD CPOPJ,DOLOA1 ;I/O ERROR
XWD CPOPJ,DOLOA1 ;BAD DIRECTORY FORMAT
XWD CPOPJ,DOLOA1 ;MEMORY CONFIGURATION TOO COMPLICATED
XWD CPOPJ,DOLOA1 ;NOT A REBOOTABLE CRASH
XWD CPOPJ,DOLOA1 ;MONITOR EXTENDS BEYOND BEGINNING OF BOOT
LODDSL==.-LODDSP
IF2 <IFN EMSTBL-DMPDSL+LODDSL-ERRTBL,<
PRINTX ?Discrepency in lengths of EMSTAB, DMPDSP, LODDSP, ERRTAB
>>
;HERE IF AN EXPLICIT STR WAS GIVEN AND AN UNPROCESSED DUMP WAS FOUND
;ON THAT STR.
STRFUL: MOVEI T1,[ASCIZ/Do you want to overwrite it? /]
MOVEI T2,[ASCIZ/No/]
PUSHJ P,ASKYN
JRST STRFUL ;CONFUSED USER--ASK AGAIN
JRST ASKSTR ;ANSWER WAS NO
JRST DODUM5 ;OVERWRITE FILE
;ROUTINE TO DUMP THE MONITOR ONTO THE CRASH FILE SPECIFIED IN THE
;COMMAND STRING. DOES 5 ONE BLOCK TRANSFERS TO WRITE THE 4 BLOCKS
;OF THE DIRECTORY PLUS WORDS 0-177 OF PAGE 0 (SINCE THE RH20 CAN'T
;READ/WRITE ADDRESS 0) AND THEN DOES AS FEW TRANSFERS AS NECESSARY
;FOR EACH GROUP POINTER IN THE RIB. (GENERALLY ONLY 1). CALL WITH
;STRUCTURE NAME IN DEV.
;CALL: PUSHJ P,DUMP
;RETURN+1 IF ERROR DETECTED WITH ERROR CODE IN T1
;RETURN+2 IF SUCCESSFUL
DUMP: PUSHJ P,SAVE2 ;SAVE P1-P2
PUSHJ P,FNDFIL ;FIND CRASH FILE FOR THIS STR
POPJ P, ;NOT FOUND
TLNE S,(FL.SSD) ;SUSPENDING?
SKIPA T1,[[ASCIZ /[Suspending system on /]] ;YES, DIFFERENT MESSAGE
MOVEI T1,[ASCIZ/[Dumping on /]
PUSHJ P,PRMSG ;TELL THE OPERATOR WHAT
PUSHJ P,PRFILE ; WE'RE DOING
PUSHJ P,PRRBCR ;END THE LINE
MOVEI T1,RIPDMP ;GET "UNPROCESSED DUMP BIT"
TLNN S,(FL.OVW) ;DOES CALLER CARE?
TDNN T1,RIB+RIBSTS ;YES, IS BIT SET IN RIB?
CAIA ;NO, OR DOESN'T CARE
JRST UPDERR ;YES, GIVE ERROR RETURN
IORM T1,RIB+RIBSTS ;SET BIT IN RIB
PUSHJ P,WRTRIB ;REWRITE RIB
POPJ P, ;FAILED
PUSHJ P,CLRBUF ;CLEAR BUFFER AREA
MOVSI P3,-BLKSIZ ;MAKE AOBJP POINTER TO BUF
MOVEI P4,1 ;FIRST FILE PAGE IS 1
MOVEI P2,0 ;FIRST CORE PAGE IS 0
DUMP1: PUSHJ P,FNDPGS ;FIND NEXT GROUP OF CONTIGUOUS PAGES
JUMPLE P1,DUMP3 ;DONE IF NONE FOUND
MOVE T1,P1 ;COPY NUMBER OF PAGES TO T1
SUBI T1,1 ;REPEAT COUNT FOR LAST HUNK
ROT T1,-^D9 ;NUMBER OF 256K HUNKS+REPEAT COUNT IN LH
MOVEI T2,1(T1) ;T2:=NUMBER OF DESCRIPTORS
DUMP2: AOBJP P3,MCCERR ;GO IF TOO MANY DESCRIPTORS
HRRZM P4,BUF(P3) ;STORE FILE PAGE NUMBER IN BUF
MOVEI T3,(P2) ;COPY CORE PAGE NUMBER TO T3
HRLI T3,777000 ;512 PAGES IN THIS HUNK
AOBJP P3,MCCERR ;GO IF TOO MANY DESCRIPTORS
MOVEM T3,BUF(P3) ;STORE IN BUFFER
ADDI P2,<^D256*^D1024>/PAGSIZ ;INCR CORE PAGE
ADDI P4,<^D256*^D1024>/PAGSIZ ;DITTO FOR FILE PAGE
SOJG T2,DUMP2 ;LOOP FOR ALL DESCRIPTORS
HLLM T1,BUF(P3) ;CORRECT REPEAT COUNT IN LAST DESCRIPTOR
LSH T1,-<^D9+^D18> ;RIGHT JUSTIFY REPEAT COUNT
MOVNI T1,-777(T1) ;HAVE TO BACK OFF ON CORE AND FILE PAGE
SUBI P2,(T1) ; NUMBERS TO REFLECT THE (POSSIBLY)
SUBI P4,(T1) ; PARTIAL ALLOCATION IN THE LAST DESCRIPTOR
JRST DUMP1 ;LOOP FOR MORE
DUMP3: MOVE T1,[SV.END,,1] ;GET END OF DESCRIPTOR MARKER
AOBJP P3,MCCERR ;GO IF TOO MANY DESCRIPTORS
MOVEM T1,BUF(P3) ;STORE IN BUFFER
HRLI P3,SV.DIR ;MAKE P3 BE 1ST WORD OF DIRECTORY
MOVEM P3,BUF ;AND STORE IT THERE
PUSHJ P,WRTBUF ;WRITE BUFFER TO FILE
POPJ P, ;NO POINTERS OR WRITE FAILURE
PUSHJ P,CLRBUF ;CLEAR BUFFER AGAIN
MOVEI P1,3 ;NEED TO WRITE 3 BLOCKS OF ZEROS
DUMP4: PUSHJ P,WRTBUF ; TO COMPLETE DIRECTORY
POPJ P, ;NO POINTERS OR WRITE FAILURE
SOJG P1,DUMP4 ;LOOP FOR ALL
MOVE T1,[.VPAG0,,BUF] ;SETUP TO BLT WORD 0-177 TO BUF
BLT T1,BUF+BLKSIZ-1 ;DO SO
PUSHJ P,WRTBUF ;WRITE IT
POPJ P, ;NO POINTERS OR WRITE FAILURE
MOVEI P2,0 ;START WITH ADDRESS 0
DUMP5: LSH P2,W2PLSH ;CONVERT TO PAGE NUMBER
PUSHJ P,FNDPGS ;FIND NEXT GROUP OF CONTIGUOUS PAGES
JUMPLE P1,CPOPJ1 ;DONE IF NO MORE
LSH P2,P2WLSH ;CONVERT BACK TO ADDRESS
LSH P1,P2BLSH ;CONVERT PAGES TO BLOCKS
JUMPN P2,DUMP6 ;GO IF NOT DOING PAGE ZERO
ADDI P2,BLKSIZ ;COMPENSATE FOR WORDS 0-177
SUBI P1,1 ; WHICH WERE WRITTEN ABOVE
DUMP6: JUMPLE P1,DUMP5 ;LOOP IF NO MORE BLOCKS IN THIS CHUNK
PUSHJ P,LISTEN ;CHECK FOR CONTROL-C
MOVE T1,P1 ;COPY NUMBER OF BLOCKS WE WANT TO XFER
PUSHJ P,SELBLK ;SETUP TO DO THAT MANY
JRST EOFERR ;RAN OUT OF POINTERS
MOVE R,P2 ;START AT THIS ADDRESS
MOVE P1,T1 ;COPY NUMBER LEFT INTO P1 FOR LOOP TEST
MOVE T1,M ;GET NUMBER OF BLOCKS WE CAN DO
LSH T1,B2WLSH ;CONVERT TO WORDS
ADD P2,T1 ;INCREMENT ADDRESS FOR NEXT TIME
PUSHJ P,@WRTTAB(W) ;DO THE WRITE
JRST IOFERR ;WRITE ERROR
JRST DUMP6 ;LOOP FOR ALL OF CORE
SUBTTL RELOAD MONITOR
;ROUTINE TO RELOAD THE MONITOR FROM A FILE ON DISK. CALL WITH
;THE FILESPEC FROM WHICH TO LOAD SETUP IN THE FILESPEC AREA.
;CALL: PUSHJ P,DOLOAD
;RETURN+1 IF ERRORS DETECTED WITH MESSAGE ALREADY ISSUED
;RETURN+2 IF LOAD WAS SUCCESSFUL
DOLOAD: SKIPN NXMFLG ;NXMTAB VALID?
PUSHJ P,SUNXMT ;MUST REBUILD IT
PUSHJ P,ZERCOR ;START OFF CLEAN BY ZEROING CORE
PUSHJ P,SSLCHK ;CHECK FOR THE SSL
SKIPA P1,['DSKA '-10000] ;GET DISK NAME TO INCREMENT TO DSKA
MOVE P1,T1 ;GET PREDECREMENTED AOBJN POINTER
MOVE T1,[SIXBIT/SYSTEM/] ;DEFAULT FILENAME IS SYSTEM
TRNE S,FR.RBT ;UNLESS A /REBOOT REQUEST
MOVE T1,[SIXBIT/CRASH/] ;IN WHICH CASE FILENAME IS CRASH
TRNN S,FR.FIL ;SEE A FILENAME?
MOVEM T1,FILNAM ;NO, USE DEFAULT
TLNN S,(FL.WLD) ;WILD STR?
JRST DOLOA4 ;NO, USE THE ONE HE GAVE
DOLOA1: TRNE S,FR.FRC ;/FORCE SEEN?
JRST DOLOA2 ;YES
AOBJP P1,DOLOA5 ;ADVANCE POINTER
SKIPN T1,(P1) ;GET A STRUCTURE NAME
AOBJN P1,.-1 ;NONE THERE, TRY NEXT
JUMPL P1,DOLOA3 ;JUMP IF HAVE A STRUCTURE NAME
JRST DOLOA5 ;GIVE UP
DOLOA2: CAMN P1,[SIXBIT/DSKZ/] ;LOOKED AT THEM ALL?
JRST DOLOA5 ;YES, GIVE UP
ADDI P1,10000 ;STEP TO NEXT DISK NAME
MOVE T1,P1 ;COPY STRUCTURE NAME
DOLOA3: MOVEM T1,DEV ;STORE STR NAME
DOLOA4: PUSHJ P,LOAD ;LOAD IT
JRST LODERR ;GIVE ERROR MESSAGE AND RETURN
JRST CPOPJ1 ;GIVE SKIP RETURN
DOLOA5: MOVEI T1,[ASCIZ/?No file found on any structure
/]
PJRST PRMSG ;GIVE ERROR MESSAGE AND RETURN
;ROUTINE TO LOAD A NEW MONITOR INTO CORE. CALL WITH THE FILESPEC AREA
;CONTAINING THE FILE TO BE LOADED.
;CALL: PUSHJ P,LOAD
;RETURN+1 IF ERROR DETECTED WITH ERROR CODE IN T1
;RETURN+2 IF SUCCESSFUL
LOAD: PUSHJ P,SAVE2 ;SAVE P1-P2
PUSHJ P,FNDMON ;FIND THE MONITOR, READ EXE DIRECTORY
POPJ P, ;FAILED, RETURN CODE IN T1
TRNE S,FR.RBT ;THIS A REBOOT?
SKIPA T1,[[ASCIZ/[Reloading from /]] ;YES, CHANGE THE MESSAGE
MOVEI T1,[ASCIZ/[Loading from /]
PUSHJ P,PRMSG ;TELL WHAT'S HAPPENING
PUSHJ P,PRFILE ;PRINT FILENAME
PUSHJ P,PRRBCR ;END THE LINE
MOVEI P3,0 ;START WITH CORE ADDRESS OF ZERO
LOAD1: LDB P2,[POINT 9,1(P1),8] ;GET REPEAT COUNT FOR THIS ENTRY
ADDI P2,1 ;MAKE IT TOTAL PAGE COUNT
LSH P2,P2BLSH ;COMPUTE BLOCK COUNT
HRRZ P4,0(P1) ;GET FILE PAGE NUMBER
LSH P4,P2BLSH ;COMPUTE FILE BLOCK NUMBER
JUMPE P4,[LSH P2,B2WLSH ;IF ALLOCATED BUT ZERO PAGE, COMPUTE
ADD P3,P2 ; NUMBER OF WORDS IN THIS DESCRIPTOR
JRST LOAD11] ; UPDATE CORE ADDRESS AND DO NEXT ONE
CAMGE P4,BLKNUM ;PAGE NUMBERS IN THE EXE DIRECTORY MUST
JRST BDFERR ; BE MONOTONICALLY INCREASING
LOAD2: PUSHJ P,POSFIL ;POSITION FILE TO THAT BLOCK
POPJ P, ;HIT EOF
LOAD3: HRRZ P3,1(P1) ;GET CORE PAGE NUMBER
LSH P3,P2WLSH ;COMPUTE CORE ADDRESS
JUMPN P3,LOAD5 ;GO IF NOT ZERO
HRL P4,P2 ;REMEMBER NUMBER OF BLOCKS
MOVEI P2,PAGSIZ/BLKSIZ ; AND READ ONE PAGE
LOAD4: MOVEI P3,PAGSIZ ; STARTING AT 1000
LOAD5: PUSHJ P,LISTEN ;CHECK FOR CONTROL-C
CAML P3,BTTOP ;IS THERE ANY CHANCE OF HITTING BOOT?
JRST LOAD9 ;NO, DON'T BOTHER ME
CAML P3,BTBOT ;YES, DO WE KNOW FOR SURE THAT IT WILL?
JRST LOAD6 ;YES, HANDLE
MOVE T1,P2 ;NO, COPY NUMBER OF BLOCKS TO TRANSFER
LSH T1,B2WLSH ;MAKE NUMBER OF WORDS
ADD T1,P3 ;GET END+1 OF TRANSFER
CAMG T1,BTBOT ;WILL IT HIT BOOT?
JRST LOAD9 ;NO, DON'T SWEAT IT
LOAD6: TRNN S,FR.RBT ;YES, ARE WE RELOADING A SLEEP DUMP?
JRST MEPERR ;NO, CAN'T DO IT
CAML P3,BTBOT ;ARE WE ABOUT TO CLOBBER BOOT?
JRST LOAD7 ;YES, BE SELECTIVE
MOVE T1,BTBOT ;NO, GET START OF BOOT
SUB T1,P3 ;FIND WORDS UNTIL BOOT
LSH T1,W2BLSH ;MAKE NUMBER OF BLOCKS
SUB P2,T1 ;GET NUMBER OF BLOCKS TO CLOBBER
MOVEM P2,SCR ;SAVE REMAINDER
MOVE P2,T1 ;COPY NUMBER OF 'SAFE' BLOCKS
PUSHJ P,REDBLK ;READ THEM IN
POPJ P, ;PROPAGATE ERROR
MOVE P2,SCR ;GET REMAINING NUMBER TO TRANSFER
JRST LOAD5 ;CHECK IT AGAIN
LOAD7: MOVE T1,P3 ;YES, COPY PAGE NUMBER
SUB T1,BTBOT ;CONVERT TO OFFSET
CAIL T1,.BTSVB ;IS THIS IN THE RANGE
CAIL T1,.BTSVE ; THAT WE CARE ABOUT?
JRST LOAD8 ;NO, DON'T BOTHER ME WITH IT
PUSHJ P,BLOAD ;YES, LOAD SCR WITH A BLOCK
POPJ P, ;PROPAGATE FAILURE
MOVE T1,P3 ;COPY PHYS. ADDRESS AGAIN
SUB T1,BTBOT ;CONVERT TO OFFSET
MOVE T2,T1 ;COPY OFFSET
MOVE T3,T1 ;AGAIN
ANDI T1,<BLKSIZ-1> ;KEEP OFFSET INTO BLOCK
HRLI T2,SCR(T1) ;GET SOURCE POINTER
ADDI T2,BTSVEC(T1) ;FORM XFER WORD
MOVEI T1,BTSVEC+BLKSIZ(T3) ;GET PRESUMED TERMINATION POINTER
CAIGE T3,.BTSVE ;UNLESS PARTIAL LAST BLOCK,
MOVEI T1,BTSVEC+.BTSVE ;THEN KEEP ONLY WHAT WE NEED
BLT T2,-1(T1) ;COPY THE DATA
;FALL INTO LOAD8 TO TRY THE NEXT BLOCK
LOAD8: ADDI P3,BLKSIZ ;SKIPPING ONE BLOCK
SOJE P2,LOAD11 ;TRY THE NEXT POINTER IF EXHAUSTED COUNT
ADDI P4,1 ;NO, BUMP FILE BLOCK NUMBER
PUSHJ P,POSFIL ;GET THERE
POPJ P, ;PROPAGATE ERROR
JRST LOAD5 ;AND TRY ANOTHER BLOCK
LOAD9: PUSHJ P,REDBLK ;READ THE SPECIFIED BLOCKS
POPJ P, ;FAILED
HLRZ P2,P4 ;WERE WE READING 0-777
JUMPE P2,LOAD11 ; INTO 1000-1777?
TRNN S,FR.RBT ;DOING A REBOOT?
JRST LOAD10 ;NO, CONTINUE
SKIPN .VPAG0+PAGSIZ+MBTCOM ;GET PAGE NUMBER OF COMM AREA
JRST NSSERR ;NOT A REBOOTABLE CRASH
IFN FTTAPE,<
SKIPN NOTAPE ;TAPE DRIVER CODE STILL PRESENT?
PUSHJ P,ZAPTAP ;DELETE IT NOW SO BOOT SIZE IS CORRECTED
> ;END IFN FTTAPE
MOVE T2,.VPAG0+PAGSIZ+MBTCOM ;GET PAGE NUMBER OF COMM AREA
HLLZ T1,T2 ;GET -NUMBER OF PAGES IN LH
HLLZ T3,BTSVEC+.BTSIZ ;GET PAGES IN BOOT
CAMLE T1,T3 ;MAKE SURE WE'LL FIT
JRST MCCERR ;COMPLAIN
HRRZS T3,T2 ;CLEAR JUNK
LSH T3,P2WLSH ;CONVERT PAGE TO ADDRESS
CAME T3,.VPAG0+PAGSIZ+BOOTSA ;DOES IT MATCH THE BOOT ADDRESS?
JUMPL T1,NSSERR ;NO, CAN'T DO IT
PUSHJ P,MOVBTS ;MOVE US TO THOSE PAGES
SKIPA T1,[.VPAG0+PAGSIZ,,.VPAG0] ;SETUP TO BLT ENTIRE PAGE
LOAD10: MOVE T1,[.VPAG0+PAGSIZ+40,,.VPAG0+40] ;SETUP TO BLT 40-777
BLT T1,.VPAG0+PAGSIZ-1 ;MOVE THEM TO WHERE THEY BELONG
HRRZS P4 ;CLEAR FLAG
SUBI P2,PAGSIZ/BLKSIZ ;COMPENSATE FOR WHAT WE READ
JUMPG P2,LOAD4 ;DO THE REST IF MORE
LOAD11: AOBJP P1,.+1 ;SKIP PAST FIRST OF 2 WORDS
AOBJN P1,LOAD1 ;AND DO NEXT DESCRIPTOR
JRST CPOPJ1 ;GIVE SKIP RETURN
BLOAD: PUSHJ P,SAVE4 ;PRESERVE THESE FOR LATER
MOVEI P2,1 ;ONLY READ ONE BLOCK
MOVEI P3,SCR-BTSVEC ;OFFSET TO SCRATCH BUFFER
ADD P3,BTBOT ;PHYSICAL ADDRESS FOR READ
PJRST REDBLK ;DO THE READ & PROPAGATE ITS RETURN
SUBTTL PARITY ERROR PAGE REPLACEMENT
;ROUTINE TO REPLACE A MONITOR HIGH SEGMENT PAGE FROM THE DISK COPY
;OF THE MONITOR ON PARITY ERRORS, ETC.
;CALL:
; SUBDAT+0/EXEC VIRTUAL PAGE NUMBER
; SUBDAT+1/PHYSICAL ADDRESS OF START OF THAT PAGE
; PUSHJ P,PGFUNC
;RETURN +1 ALWAYS, WITH PAGE REPLACED OR ERRFLG LIT
PGFUNC: SKIPN BTSVEC+.BTDEV ;DO WE KNOW WHERE TO FIND THE MONITOR?
JRST PGFUN3 ;NO, COMPLAIN
DMOVE P2,SUBDAT ;YES, GET OUR ARGUMENTS
SKIPE P2 ;IF EITHER THE PAGE NUMBER
SKIPN P3 ;OR THE DESTINATION IS ZERO,
JRST PGFUN4 ;WHINE
MOVE T1,[BTSVEC+.BTDEV,,DEV]
BLT T1,PTHBLK+6 ;COPY THE MONITOR FILESPEC
MOVEI S,FR.DEV!FR.FIL!FR.EXT!FR.PTH ;WE HAVE EVERYTHING
PUSHJ P,FNDMON ;FIND FILE CONTAINING THE MONITOR
JRST PGFUN5 ;FAILED
DMOVE P2,SUBDAT ;GET ARGUMENTS AGAIN
PGFUN1: HRRZ P4,0(P1) ;GET FILE PAGE NUMBER OF NEXT DESCRIPTOR
JUMPE P4,PGFUN2 ;NO GOOD IF ALLOCATED BUT ZERO PAGE
HRRZ T1,1(P1) ;GET CORE PAGE NUMBER OF DESCRIPTOR
LDB T2,[POINT 9,1(P1),8] ; AND REPEAT COUNT
ADD T2,T1 ;CALCULATE LAST PAGE IN THIS DESCRIPTOR
CAML P2,T1 ;IS DESIRED PAGE DESCRIBED BY
CAMLE P2,T2 ; THIS DESCRIPTOR?
JRST PGFUN2 ;NO, CONTINUE
SUB P2,T1 ;COMPUTE RELATIVE OFFSET OF DESIRED PAGE
ADD P4,P2 ;AND FILE PAGE CONTAINING IT
LSH P4,P2BLSH ;COMPUTE FILE BLOCK NUMBER
PUSHJ P,POSFIL ;POSITION FILE TO THAT BLOCK
JRST PGFUN5 ;HIT EOF
MOVEI P2,PAGSIZ/BLKSIZ ;NUMBER OF BLOCKS TO TRANSFER
PUSHJ P,REDBLK ;READ PAGE INTO CORE
JRST PGFUN5 ;FAILED
POPJ P, ;RETURN WITH ERRFLG CLEAR (WINNITUDE)
PGFUN2: AOBJP P1,.+1 ;LOOP FOR ALL DESCRIPTORS
AOBJN P1,PGFUN1 ;WHICH ARE 2 WORDS LONG
MOVEI T1,[ASCIZ /% Can't find requested page in /]
JRST PGFUN6 ;COMPLAIN ABOUT MISSING PAGE
PGFUN3: MOVEI T1,[ASCIZ /
? BOOT error; no saved monitor filespec
/]
TRNA ;SKIP INTO FOLLOWING
PGFUN4: MOVEI T1,[ASCIZ /
? BOOT error; can't replace page zero
/]
SETOM ERRFLG ;RETURN ERROR TO TOP LEVEL
PJRST PRMSG ;TYPE TEXT AND RETURN
PGFUN5: HRRZ T1,EMSTAB(T1) ;CONVERT ERROR CODE TO STRING
PGFUN6: PUSHJ P,PRMSG ;TYPE THE ERROR TEXT
PUSHJ P,PRFILE ;AND THE FILESPEC
PUSHJ P,PRCRLF ;END THE LINE
SETOM ERRFLG ;RETURN BADNESS
POPJ P, ;GIVE UP
SUBTTL FILE SEARCH SUBROUTINES
;ROUTINE TO FIND THE FILE CONTAINING THE MONITOR SPECIFIED IN THE
;FILESPEC AREA, READ THE EXE DIRECTORY INTO BUF AND SETUP TO READ
;THE FILE.
;CALL: PUSHJ P,FNDMON
;RETURN+1 IF FAILED WITH ERROR CODE IN T1
;RETURN+2 IF SUCCESSFUL WITH
; P1/AOBJN POINTER TO EXE DIRECTORY DESCRIPTORS
;DESTROYS P3-P4
;FOR TAPES WE BRANCH TO SCAN TO SEARCH THE TAPE FOR THE T$FIL RECORD
;FOR THE DESIRED FILE, READ THE BLOCK CONTAINING THE DIRECTORY AND BLT
;THE DIRECTORY INTO BUF, THEN REJOIN THE CODE AT FNDMOE.
FNDMON:
IFN FTTAPE,<
SKIPE TAPIDX ;TAPE I/O?
JRST TAPSCN ;YES, SEARCH THE TAPE FOR T$FIL RECORD
>; END IFN FTTAPE
PUSHJ P,FNDFIL ;FIND THE FILE
POPJ P, ;FILE NOT FOUND
PUSHJ P,REDBUF ;READ 1ST BLOCK OF EXE DIRECTORY
POPJ P, ;FAILED
FNDMOE: HLRZ T1,BUF ;GET CODE
HRRZ P1,BUF ;AND LENGTH OF DIRECTORY
CAIN T1,SV.DIR ;THIS AN EXE FILE?
CAILE P1,BLKSIZ-1 ;AND NOT TOO LONG?
JRST BDFERR ;NO, BAD DIRECTORY FORMAT
MOVNI P1,-1(P1) ;BUILD -VE COUNT FOR AOBJN POINTER
HRLI P1,BUF+1 ;AND FIRST WORD
MOVSS P1 ;MAKE IT AN AOBJN POINTER TO BUF
JRST CPOPJ1 ;GIVE SKIP RETURN
;ROUTINE TO FIND A FILE AND SETUP ITS RIB IN RIB. CALL WITH
;FILESPEC AREA SETUP.
;CALL: PUSHJ P,FNDFIL
;RETURN+1 IF NOT FOUND OR READ ERROR ON DIRECTORY WITH CODE IN T1
;RETURN+2 IF FILE FOUND
;DESTROYS P3-P4
FNDFIL: TLZ S,(FL.FFL) ;HAVEN'T FOUND FILE YET
PUSHJ P,SAVE2 ;SAVE P1-P2
PUSHJ P,FNDMFD ;FIND THE MFD
JRST SNTERR ;FAILED
MOVEI P1,0 ;SETUP LOOP POINTER TO PTHBLK
FNDFI1: SKIPN P3,PTHBLK(P1) ;GET NEXT UFD/SFD FROM PATH BLOCK
MOVE P3,FILNAM ;FOUND END, USE FILENAME
MOVEI P4,'UFD' ;ASSUME EXTENSION IS UFD
JUMPE P1,FNDFI2 ;GO IF CORRECT
MOVEI P4,'SFD' ;ASSUME SFD
SKIPN PTHBLK(P1) ;DONE WITH PATH BLOCK?
HLRZ P4,EXT ;YES, USE REAL EXTENSION
FNDFI2: PUSHJ P,SRCHFD ;SEARCH THE DIRECTORY
JRST FNTERR ;FILE NOT FOUND
PUSH P,T2 ;SAVE BLOCK IN UNIT OF RIB
PUSHJ P,FNDLUN ;FIND SPECIFIED UNIT
JRST [POP P,(P) ;FLUSH STACK
JRST SNTERR] ;GIVE ERROR CODE AND RETURN
POP P,F ;RESTORE BLOCK OF RIB
PUSHJ P,REDRBP ;READ THE RIB OF THE FILE
JRST FNTERR ;FAILED
SKIPE PTHBLK(P1) ;FOUND UFD, ALL SFD'S AND FILE?
AOJA P1,FNDFI1 ;NO, TRY NEXT LEVEL
TLO S,(FL.FFL) ;INDICATE THAT WE FOUND THE FILE
JRST CPOPJ1 ;GIVE SKIP RETURN, RIB SETUP
;ROUTINE TO FIND THE MFD FOR A STRUCTURE. CALL WITH DEV CONTAINING
;THE STRUCTURE NAME.
;CALL: PUSHJ P,FNDMFD
;RETURN+1 IF FAILED
;RETURN+2 IF FOUND WITH MFD RIB IN RIB
;DESTOYS P3-P4
FNDMFD: SETZM LUNPOS ;FIND UNIT ZERO OF STRUCTURE
PUSHJ P,FNDUNI ;FIND IT
POPJ P, ;FAILED, GIVE UP
MOVE T1,HOM+HOMMFD ;GET BLOCK IN STR CONTAINING MFD RIB
MOVE T2,HOM+HOMBSC ;GET BLOCKS/SUPERCLUSTER
IMUL T2,HOM+HOMSCU ;TIME SUPERCLUSTERS/UNIT
IDIV T1,T2 ;T1=UNIT, T2=BLOCK IN UNIT OF RIB
PUSH P,T2 ;SAVE BLOCK NUMBER
JUMPE T1,FNDMF1 ;GO IF ON UNIT ZERO
MOVEM T1,LUNPOS ;STORE UNIT
PUSHJ P,FNDUNI ;FIND UNIT
JRST TPOPJ ;FAILED
FNDMF1: POP P,F ;RESTORE BLOCK IN UNIT
MOVE P3,[1,,1] ;FILENAME IS [1,,1]
MOVEI P4,'UFD' ;EXTENSION IS UFD
PJRST REDRBP ;READ RIB OF MFD AND RETURN
;ROUTINE TO SEARCH A UFD OR SFD FOR A FILE. CALL WITH RIB SETUP
;IN RIB.
;CALL:
; P3/FILENAME, P4/0,,EXTENSION
; PUSHJ P,SRCHFD
;RETURN+1 IF FILE NOT FOUND
;RETURN+2 IF FOUND
;RETURNS T1=UNIT IN STR, T2=BLOCK IN UNIT OF RIB FOR FILE.
SRCHFD: PUSHJ P,REDBUF ;READ THE NEXT BLOCK OF THE DIRECTORY
POPJ P, ;EOF OR READ ERROR
MOVSI T1,-BLKSIZ ;BUILD AOBJN POINTER TO BLOCK
SRCHF1: HLRZ T2,BUF+1(T1) ;GET EXTENSION
CAMN P3,BUF(T1) ;FILENAMES MATCH?
CAME P4,T2 ;YES, EXTENSIONS MATCH?
AOBJN T1,.+2 ;NO, INCREMENT PAST FILENAME
JRST SRCHF2 ;YES
AOBJN T1,SRCHF1 ;LOOP FOR ALL OF THIS BLOCK
JRST SRCHFD ;TRY NEXT BLOCK
SRCHF2: HRRZ T1,BUF+1(T1) ;GET CFP FROM DIRECTORY
IDIV T1,HOM+HOMSCU ;T1=UNIT, T2=SUPERCLUSTER IN UNIT
IMUL T2,HOM+HOMBSC ;T2=BLOCK IN UNIT
JRST CPOPJ1 ;GIVE SKIP RETURN
SUBTTL BLOCK READ/WRITE SUBROUTINES
;ROUTINE TO WRITE BUF/RIB TO THE OUTPUT FILE. CALL WITH RIB OF FILE
;SETUP.
;CALL: PUSHJ P,WRTBUF -OR- PUSHJ P,WRTRIB
;RETURN+1 IF ERROR DETECTED WITH ERROR CODE IN T1
;RETURN+2 IF SUCCESSFUL
WRTRIB: MOVEI R,RIB ;POINT TO RIB
AOS SAVSIZ ;COMPENSATE FOR SELBLK DECREMENTING SAVSIZ
TLZA S,(FL.RIB) ;FORCE SELBLK TO WRITE THE RIB
WRTBUF: MOVEI R,BUF ;POINT TO BUF
MOVEI T1,1 ;NUMBER OF BLOCKS IS 1
PUSHJ P,SELBLK ;SETUP TO DO THAT MANY
JRST EOFERR ;FILE MUST BE REALLY SCREWED UP
JUMPN T1,EOFERR ;DITTO
PUSHJ P,VRTWRT ;WRITE THE BLOCK
JRST IOFERR ;WRITE ERROR
JRST CPOPJ1 ;GIVE SKIP RETURN
;ROUTINE TO READ ONE BLOCK FROM THE INPUT FILE INTO BUF. CALL WITH
;RIB OF FILE SETUP.
;CALL: PUSHJ P,REDBUF
;RETURN+1 IF ERROR DETECTED WITH ERROR CODE IN T1
;RETURN+2 IF SUCCESSFUL
REDBUF: MOVEI R,BUF ;POINT TO BUF
MOVEI T1,1 ;NUMBER OF BLOCKS IS 1
PUSHJ P,SELBLK ;SETUP TO READ
JRST EOFERR ;HIT EOF
JUMPN T1,EOFERR ;DITTO
PUSHJ P,VRTRED ;READ THE BLOCK
JRST IOFERR ;READ ERROR
JRST CPOPJ1 ;GIVE SKIP RETURN
;ROUTINE TO POSITION AN EXE FILE SO THAT THE NEXT READ WILL READ
;THE BLOCKS THAT WE WANT.
;CALL:
; P4/DESIRED BLOCK IN FILE
; PUSHJ P,POSFIL
;RETURN+1 IF EOF ENCOUNTERED WITH ERROR CODE IN T1
;RETURN+2 WITH FILE POSITIONED CORRECTLY
POSFIL: CAMN P4,BLKNUM ;AT THE RIGHT BLOCK IN THE FILE NOW?
JRST CPOPJ1 ;YES, GIVE SKIP RETURN
MOVEI T1,1 ;DO ONE BLOCK
PUSHJ P,SELBLK ;USETI .+1
JRST EOFERR ;CANNOT HAVE EOF HERE
JRST POSFIL ;TRY AGAIN
;ROUTINE TO READ ONE OR MORE BLOCKS FROM AN EXE FILE.
;CALL: P2/NUMBER OF BLOCKS TO READ
; P3/CORE ADDRESS OF WHERE TO READ FIRST BLOCK
; P4/FILE BLOCK NUMBER OF FIRST BLOCK
; PUSHJ P,REDBLK
;RETURN+1 IF ERROR WITH ERROR CODE IN T1
;RETURN+2 IF SUCCESSFUL WITH P3 AND P4 UPDATED TO REFLECT THE TRANSFER
REDBLK:
IFN FTTAPE,<
SKIPE TAPIDX ;TAPE I/O
PJRST REDTAP ;YES, DO IT OVER THERE
>; END IFN FTTAPE
REDBL1: JUMPLE P2,CPOPJ1 ;READ ALL BLOCKS YET?
MOVE T1,P2 ;NO, GET NUMBER OF BLOCKS TO TRANSFER
PUSHJ P,SELBLK ;SETUP TO DO THAT MANY
JRST EOFERR ;CAN'T HAVE EOF
MOVE R,P3 ;PUT CORE ADDRESS IN R
MOVE P2,T1 ;COPY BLOCKS WE COULDN'T DO FOR NEXT TIME
ADD P4,M ;INCREMENT FILE BLOCK NUMBER
MOVE T1,M ;GET NUMBER OF BLOCKS TO DO
LSH T1,B2WLSH ;CONVERT TO WORDS
ADD P3,T1 ;UPDATE CORE ADDRESS
PUSHJ P,@REDTAB(W) ;READ THE SPECIFIED BLOCKS
JRST IOFERR ;I/O ERROR
JRST REDBL1 ;CONTINUE FOR ALL
;ROUTINE TO FIND A UNIT AND READ IT'S HOM BLOCK. CALL WITH LUNPOS
;CONTAINING THE LOGICAL UNIT NUMBER AND DEV CONTAINING THE DEVICE
;NAME.
;CALL:
; T1/LOGICAL UNIT IN STRUCTURE
; PUSHJ P,FNDLUN
;RETURN+1 IF NOT FOUND
;RETURN+2 IF FOUND WITH HOM BLOCK IN HOM
FNDLUN: EXCH T1,LUNPOS ;STORE UNIT, GET CURRENT
CAMN T1,LUNPOS ;SAME AS CURRENT ONE?
JRST CPOPJ1 ;YES, ALREADY THERE
;; PJRST FNDUNI ;FALL INTO FNDUNI
;ROUTINE TO FIND A UNIT BY EXHAUSTIVE SEARCH. CALL WITH LUNPOS
;CONTAINING THE LOGICAL UNIT NUMBER IN THE STRUCTURE, DEV CONTAINING
;THE STRUCTURE NAME AND SDLPOS CONTAINING THE POSITION IN THE SYSTEM
;DUMP LIST.
;CALL: PUSHJ P,FNDUNI
;RETURN+1 IF NOT FOUND
;RETURN+2 IF FOUND WITH HOM BLOCK IN HOM
FNDUNI: MOVSI J,-DVCTBL ;AOBJN POINTER TO DEVICE CODE TABLE
FNDUN1: MOVSI U,-MAXUNI ;AOBJN POINTER FOR EACH UNIT
FNDUN2: HLRZ W,DVCTAB(J) ;SETUP TYPE OFFSET
PUSHJ P,SETIOT ;SETUP I/O INSTRUCTIONS
PUSHJ P,REDHOM ;READ HOM BLOCK FOR UNIT
JRST FNDUN3 ;FAILED OR BAD
MOVE T1,HOM+HOMLUN ;GET LOGICAL UNIT NUMBER OF THIS STR
MOVE T2,HOM+HOMSNM ;GET STR NAME
CAMN T1,LUNPOS ;UNIT NUMBER MATCH?
CAME T2,DEV ;YES, DOES IT?
JRST FNDUN3 ;NO
JRST CPOPJ1 ;YES, GIVE SKIP RETURN
FNDUN3: AOBJN U,FNDUN2 ;LOOP FOR NEXT UNIT
AOBJN J,FNDUN1 ;LOOP FOR NEXT CONTROLLER
POPJ P, ;ERROR RETURN
;ROUTINE TO READ A HOM BLOCK.
;CALL:
; U/PHYSICAL UNIT NUMBER
; J/OFFSET INTO DEVICE CODE TABLE
; W/OFFSET INTO TYPE TABLES
; PUSHJ P,REDHOM
;RETURN+1 IF ERROR
;RETURN+2 IF SUCCESSFUL WITH HOM BLOCK IN HOM
REDHOM: MOVEI F,LBNHOM ;ADDRESS OF FIRST HOM BLOCK ON UNIT
REDHO1: MOVEI R,HOM ;ADDRESS OF WHERE TO PUT IT
MOVEI M,1 ;READ 1 BLOCK
PUSHJ P,VRTRED ;READ THE BLOCK
JRST REDHO2 ;FAILED, TRY SECOND
MOVS T1,HOM+HOMNAM ;GET FIRST WORD OF BLOCK
MOVE T2,HOM+HOMCOD ;GET WORD CONTAINING UNLIKELY CODE
CAIN T1,'HOM' ;NAME MUST BE HOM
CAIE T2,CODHOM ;AND MUST MATCH UNLIKELY CODE
JRST REDHO2 ;ONE FAILED
CAMN F,HOM+HOMSLF ;SELF POINTER MUST MATCH
SKIPE HOM+HOMREF ;AND MUST NOT NEED REFRESHING
JRST REDHO2 ;FAILED
MOVEI T1,T4 ;SETUP HOMCLP AND
HRRM T1,HOM+HOMCLP ; HOMCNP TO POINT
HRRM T1,HOM+HOMCNP ; TO T4
JRST CPOPJ1 ;GIVE SKIP RETURN
REDHO2: CAIE F,LBNHOM ;DOING FIRST HOM BLOCK?
POPJ P, ;NO, GIVE FAIL RETURN
MOVEI F,LB2HOM ;GET ADDRESS OF 2ND
JRST REDHO1 ;AND TRY THAT ONE
;ROUTINE TO READ A RIB.
;CALL:
; U/PHYSICAL UNIT NUMBER
; J/OFFSET INTO DEVICE CODE TABLE
; W/OFFSET INTO TYPE TABLES
; F/BLOCK IN UNIT
; PUSHJ P,REDRIB
;RETURN+1 IF READ OR RIB ERROR
;RETURN+2 IF SUCCESSFUL WITH RIB IN RIB
;CALL REDRBP IF FILENAME AND EXTENSION ALREADY IN P3,P4
;DESTROYS P3-P4
REDRIB: MOVE P3,FILNAM ;GET FILENAME
HLRZ P4,EXT ;AND EXT
REDRBP: MOVEI R,RIB ;ADDRESS OF WHERE TO READ IT
MOVEI M,1 ;READ 1 BLOCK
PUSHJ P,VRTRED ;READ THE BLOCK
POPJ P, ;FAILED
MOVE T1,RIB+RIBCOD ;GET WORD CONTAINING UNLIKELY CODE
CAIN T1,CODRIB ;MUST MATCH
SKIPL T1,RIB+RIBFIR ;POINTER MUST BE NEGATIVE
POPJ P, ;FAILED
MOVEM T1,SAVFIR ;SAVE FOR SELBLK
MOVE T1,RIB+RIBNAM ;GET FILENAME FROM RIB
CAMN T1,P3 ;MATCH WITH WHAT WE WANT?
CAME F,RIB+RIBSLF ;SELF POINTER MUST MATCH
POPJ P, ;ELSE ERROR
HLRZ T1,RIB+RIBEXT ;GET EXTENSION FROM RIB
MOVE T2,PTHBLK ;GET PPN FROM PATH BLOCK
CAIN P4,'UFD' ;READING A UFD?
MOVE T2,[1,,1] ;YES, PPN IS 1,1
CAMN T1,P4 ;EXTENSION MATCH?
CAME T2,RIB+RIBPPN ; ALONG WITH PPN?
POPJ P, ;NO, ERROR
TLO S,(FL.RIB) ;TELL SELBLK THAT FIRST BLOCK IS A RIB
SETOM BLKCNT ;AND NO BLOCKS LEFT IN GROUP
MOVE T1,RIB+RIBSIZ ;GET RIBSIZ FROM RIB
ADDI T1,BLKSIZ-1 ;ROUND UP TO A BLOCK
LSH T1,W2BLSH ;CONVERT TO BLOCKS
TLZE S,(FL.EXR) ;READING EXTENDED RIB?
JRST CPOPJ1 ;YES, GIVE SKIP RETURN
MOVEM T1,SAVSIZ ;NO, SAVE SIZE FOR SELBLK
SETZM BLKNUM ;AND ZERO RELATIVE BLOCK IN FILE
JRST CPOPJ1 ;AND GIVE SKIP RETURN
;ROUTINE TO SETUP A TRANSFER TO/FROM DISK.
;CALL:
; T1/NUMBER OF BLOCKS DESIRED TO TRANSFER
; PUSHJ P,SELBLK
;RETURN+1 IF EOF DETECTED
;RETURN+2 IF SOME TRANSFER IS POSSIBLE
;RETURNS M/NUMBER OF BLOCKS POSSIBLE, T1/NUMBER OF BLOCKS IN REQUEST
; THAT COULDN'T BE TRANSFERED, F/BLOCK ON UNIT OF FIRST BLOCK.
;PRESERVES P3-P4
SELBLK: TLNN S,(FL.RIB) ;WANT TO SKIP FIRST RIB BLOCK?
JRST SELBL1 ;NO
PUSHJ P,SAVE2 ;SAVE P1-P2
MOVE P1,T1 ;SAVE REQUESTED TRANSFER IN P1
MOVEI T1,1 ;AND MAKE IT LOOK LIKE 1 BLOCK
SELBL1: SKIPLE BLKCNT ;AND MORE BLOCKS LEFT IN GROUP?
JRST SELBL4 ;YES, USE THEM
SELBL2: SKIPL T2,SAVFIR ;RUN OUT OF POINTERS?
JRST SELBL5 ;YES, CHECK FOR EXTENDED RIBS
MOVE T4,RIB(T2) ;GET NEXT POINTER
AOBJN T2,.+1 ;INCREMENT POINTER TO POINTERS
MOVEM T2,SAVFIR ;STORE POINTER BACK
LDB T2,HOM+HOMCNP ;GET CLUSTER COUNT FROM THIS POINTER
JUMPN T2,SELBL3 ;GO IF NON-ZERO
TRZN T4,RIPNUB ;UNIT CHANGE POINTER?
POPJ P, ;NO, THAT'S AN EOF POINTER
PUSH P,T1 ;SAVE ARGUMENT
MOVE T1,T4 ;COPY NEW UNIT NUMBER
PUSHJ P,FNDLUN ;FIND IT AND SETUP HOM BLOCK
JRST TPOPJ ;NOT THERE, SIMULATE EOF
POP P,T1 ;RESTORE ARGUMENT
JRST SELBL2 ;TRY WITH NEXT POINTER
SELBL3: IMUL T2,HOM+HOMBPC ;COMPUTE NUMBER OF BLOCKS IN GROUP
SKIPL SAVFIR ;DOING LAST POINTER IN THIS RIB?
SUBI T2,1 ;YES, DON'T OVERWRITE SPARE RIB
TLNE S,(FL.RIB) ;SKIPPING A RIB?
AOS SAVSIZ ;YES, FILE IS 1 MORE BLOCK LONG
CAMLE T2,SAVSIZ ;MORE THAN AMOUNT REMAINING IN FILE?
MOVE T2,SAVSIZ ;YES, USE THAT
MOVEM T2,BLKCNT ;STORE IT
LDB T2,HOM+HOMCLP ;GET CLUSTER ADDRESS OF 1ST CLUSTER IN GROUP
IMUL T2,HOM+HOMBPC ;COMPUTE BLOCK ADDRESS
MOVEM T2,BLKADR ;STORE ADDRESS OF BLOCK
;CONTINUED ON THE NEXT PAGE
SELBL4: MOVN M,T1 ;GET -VE NUMBER OF BLOCKS IN REQUEST
SUB T1,BLKCNT ;SUBTRACT AMOUNT LEFT IN GROUP
SKIPLE T1 ;REQUEST LARGER THAN AMOUNT WE HAVE?
MOVN M,BLKCNT ;YES, USE WHAT WE HAVE
ADDM M,BLKCNT ;DECREASE BLKCNT BY APPROPRIATE AMOUNT
ADDM M,SAVSIZ ; AND SIZE OF FILE
MOVNS M ;SET M TO AMOUNT TO TRANSFER
MOVE F,BLKADR ;START AT THIS BLOCK
ADDM M,BLKADR ;INCREMENT BLOCK ADDRESS FOR NEXT CALL
TLNN S,(FL.RIB) ;SKIPING A RIB?
ADDM M,BLKNUM ;NO, UPDATE RELATIVE FILE BLOCK
SKIPGE T1 ;CAN WE DO THE WHOLE REQUEST?
MOVEI T1,0 ;YES, RETURN ZERO AS REMAINDER
TLZN S,(FL.RIB) ;SKIPPING 1 BLOCK FOR RIB?
JRST CPOPJ1 ;NO, RETURN TO CALLER
MOVE T1,P1 ;RESTORE ORIGINAL REQUEST
JRST SELBL1 ;AND DO THE REAL REQUEST
SELBL5: SKIPN RIB+RIBXRA ;EXTENDED RIB POINTER?
POPJ P, ;NO, GIVE EOF RETURN
PUSH P,T1 ;SAVE ARGUMENT
PUSH P,P3 ;AND QUASI-PRESERVED REGISTERS
PUSH P,P4 ;SMASHED BY REDRIB
LDB T1,DEYRBU ;GET UNIT ON WHICH NEXT RIB EXISTS
PUSHJ P,FNDLUN ;FIND UNIT, SETUP HOM BLOCK
JRST SELBL6 ;FAILED GIVE EOF RETURN
LDB F,DEYRBA ;GET CLUSTER ADDRESS ON THAT UNIT
IMUL F,HOM+HOMBPC ;CONVERT TO BLOCK ADDRESS
TLO S,(FL.EXR) ;DON'T CHANGE SAVSIZ FOR EXTENDED RIBS
PUSHJ P,REDRIB ;READ NEW RIB
JRST SELBL6 ;FAILED, GIVE EOF RETURN
POP P,P4 ;RESTORE P4 AND
POP P,P3 ; P3
POP P,T1 ;RESTORE ARGUMENT
JRST SELBLK ;AND TRY NEW POINTER FROM THIS RIB
SELBL6: TLZ S,(FL.EXR) ;MAKE SURE THIS FLAG IS OFF
ADJSP P,-3 ;BRING STACK INTO SYNC
POPJ P, ;AND GIVE NON-SKIP RETURN
SUBTTL SUPPORT SUBROUTINES
;ROUTINE TO CLEAR BUF.
;CALL: PUSHJ P,CLRBUF
;RETURN+1 ALWAYS
CLRBUF: SETZM BUF ;CLEAR FIRST WORD
MOVE T1,[BUF,,BUF+1] ;SETUP FOR BLT
BLT T1,BUF+BLKSIZ-1 ;CLEAR IT ALL
POPJ P, ;RETURN
;ROUTINE TO STORE A DEVICE CODE IN ALL I/O INSTRUCTIONS.
;CALL:
; J/OFFSET INTO DEVICE CODE TABLE
; PUSHJ P,SETIOT
;OR (KL ONLY):
; T1/DEVICE CODE
; PUSHJ P,SETIOC
;RETURN+1 ALWAYS
SETIOT:
IFN FTKL10,<
HRRZ T1,DVCTAB(J) ;GET DEVICE CODE
SETIOC: MOVSI T2,-IOTTBL ;BUILD AOBJN POINTER TO IOTTAB
DPB T1,[POINT 7,IOTTAB(T2),9] ;STORE DEVICE CODE IN INSTN.
AOBJN T2,.-1 ;DO THEM ALL
>
POPJ P, ;RETURN
;RETURN POINTS TO SET T1 TO AN ERROR CODE AND NON-SKIP RETURN
ERRTAB:
SNTERR: JSP T1,ALLERR ;STRUCTURE NOT FOUND
FNTERR: JSP T1,ALLERR ;FILE NOT FOUND
UPDERR: JSP T1,ALLERR ;UNPROCESSED DUMP
EOFERR: JSP T1,ALLERR ;UNEXPECTED EOF
IOFERR: JSP T1,ALLERR ;I/O ERROR
BDFERR: JSP T1,ALLERR ;BAD DIRECTORY FORMAT
MCCERR: JSP T1,ALLERR ;MEM CONFIG TOO COMPLICATED
NSSERR: JSP T1,ALLERR ;NOT SYSTEM SLEEP DUMP
MEPERR: JSP T1,ALLERR ;MONITOR EXTENDS PAST BEGINNING OF BOOT
ERRTBL==.-ERRTAB
ALLERR: SUBI T1,ERRTAB+1 ;COMPUTE ERROR CODE
TLZ T1,-1 ;CLEAR LH JUNK
POPJ P, ;RETURN
;ROUTINE TO READ DATA INTO A VIRTUAL ADDRESS.
;CALL:
; R/VIRTUAL ADDRESS
; M/NUMBER OF BLOCKS TO TRANSFER
; F/BLOCK ON UNIT
; U/PHYSICAL UNIT
; W/OFFSET INTO TYPE TABLE
; J/OFFSET INTO DEVICE CODE TABLE
; PUSHJ P,VRTRED
;RETURN+1 IF ERROR
;RETURN+2 IF SUCCESSFUL
VRTRED: PUSHJ P,MAPADR ;CONVERT VIRTUAL TO PHYSICAL ADDRESS
PJRST @REDTAB(W) ;DO THE TRANSFER
;ROUTINE TO WRITE DATA FROM A VIRTUAL ADDRESS. CALL WITH SAME ARGUMENTS
;AS VRTRED.
;CALL: PUSHJ P,VRTWRT
;RETURN+1 IF ERROR
;RETURN+2 IF SUCCESSFUL
VRTWRT: PUSHJ P,MAPADR ;CONVERT VIRTUAL TO PHYSICAL ADDRESS
PJRST @WRTTAB(W) ;DO THE TRANSFER
;ROUTINE TO CONVERT A VIRTUAL ADDRESS TO A PHYSICAL ADDRESS.
;CALL:
; R/VIRTUAL ADDRESS
; PUSHJ P,MAPADR
;RETURN+1 ALWAYS WITH PHYSICAL ADDRESS IN R
MAPADR: MAP R,(R) ;CONVERT TO PHYSICAL ADDRESS
IFN FTKL10,<
TLZ R,(^-<LG.EPT*PAGSIZ+PAGSIZ-1>) ;KEEP ONLY ADDRESS
>
IFN FTKS10,<
TLZ R,(^-<SG.EPT*PAGSIZ+PAGSIZ-1>) ;KEEP ONLY ADDRESS
>
POPJ P, ;AND RETURN
;ROUTINE TO SAVE P1 AND P2 AND CALL THE CALLER AS A COROUTINE
;WHICH RESTORES P1 AND P2 WHEN THE CALLER RETURNS.
;CALL: PUSHJ P,SAVE2
;RETURN+1 ALWAYS
SAVE2: EXCH P1,(P) ;GET RETURN, SAVE P1
PUSH P,P2 ;SAVE P2
MOVEM P1,1(P) ;SAVE RETURN
MOVE P1,-1(P) ;RESTORE P1
PUSHJ P,@1(P) ;CALL CALLER
CAIA ;NON SKIP
AOS -2(P) ;SKIP RET
POP P,P2 ;RESTORE P2
POP P,P1 ;RESTORE P1
POPJ P, ;RETURN
;ROUTINE TO SAVE P1-P4 AND CALL THE CALLER AS A COROUTINE
;WHICH RESTORES P1-P4 WHEN THE CALLER RETURNS.
;CALL: PUSHJ P,SAVE4
;RETURN+1 ALWAYS
SAVE4: EXCH P1,(P) ;GET RETURN, SAVE P1
PUSH P,P2 ;SAVE P2
PUSH P,P3 ;AND P3
PUSH P,P4 ;AND EVEN P4
MOVEM P1,1(P) ;SAVE RETURN
MOVE P1,-3(P) ;RESTORE P1
PUSHJ P,@1(P) ;CALL CALLER
CAIA ;NON SKIP
AOS -4(P) ;SKIP RET
DMOVE P1,-3(P) ;RESTORE P1 AND P2
DMOVE P3,-1(P) ;RESTORE P3 AND P4
ADJSP P,-4 ;TRIM STACK
POPJ P, ;RETURN
;ROUTINE TO SAVE F AND R AND CALL THE CALLER AS A COROUTINE
;WHICH RESTORES F AND R WHEN THE CALLER RETURNS.
;CALL: PUSHJ P,SAVFR
;RETURN+1 ALWAYS
SAVFR: EXCH F,(P) ;GET RETURN, SAVE F
PUSH P,R ;SAVE R
MOVEM F,1(P) ;SAVE RETURN
MOVE F,-1(P) ;RESTORE F
PUSHJ P,@1(P) ;CALL CALLER
CAIA ;NON SKIP
AOS -2(P) ;SKIP RET
POP P,R ;RESTORE R
POP P,F ;RESTORE F
POPJ P, ;RETURN
SUBTTL COPY ENTRY VECTOR DATA FROM PREVIOUS MONITOR
; ROUTINE TO CAUSE SSL, ASL, SDL, ETC. TO BE PRESERVED ACROSS
; MONITOR RELOADS. DATA IS COPIED FROM THE PREVIOUS BOOT'S
; ENTRY VECTOR INTO OURS. THIS DEPENDS ON PHYSICAL ADDRESS
; 20 CONTAINING THE ADDRESS OF THE OLD BOOT'S ENTRY VECTOR.
COPDAT: SKIPN P1,.VPAG0+BOOTSA ;GET VECTOR ADDRESS
POPJ P, ;OLD STYLE BOOTSTRAP
LSH P1,W2PLSH ;CONVERT TO A PAGE NUMBER
PUSHJ P,REFMEM ;MAKE SURE PAGE EXISTS
JFCL ;INTERLEAVING ERROR??
POPJ P, ;NXM--CAN'T COPY DATA
HRRM P1,EPT+.MVECT ;MAKE PAGE ADDRESSABLE
CLRPT .VVECT ;FLUSH PAGE TABLE FOR VECTOR PAGE
MOVEI T1,.VVECT ;POINT TO OLD VECTOR
MOVE T2,BTSVEC+.BTNAM ;GET IDENTIFIER
CAMN T2,.BTNAM(T1) ;SAME?
SKIPL .BTSIZ(T1) ;-PAGE LENGTH SETUP?
POPJ P, ;NO
SKIPN T2,.BTSAV(T1) ;ANY SAVED DATA?
POPJ P, ;NO
MOVSI T3,.BTSVB(T1) ;POINT TO START OF SAVED DATA
HRRI T3,BTSVEC+.BTSVB ;DESTINATION ADDRESS
BLT T3,BTSVEC+.BTSVB-1(T2) ;COPY PRESERVED VECTOR DATA
POPJ P, ;RETURN
SUBTTL MOVE BOOT TO TOP OF MEMORY AND ZERO CORE
;ROUTINE TO MOVE BOOT TO THE TOP OF CORE SO THAT A NEW MONITOR
;CAN BE LOADED. ALSO CALLED ON A REBOOT REQUEST TO MOVE BOOT
;TO THE COMMUNICATION REGION SPECIFIED BY BOOTSA IN THE DUMP.
;CALL:
; T2/PHYSICAL PAGE NUMBER OF WHERE TO MOVE BOOT
; PUSHJ P,MOVBTS
;RETURN+1 ALWAYS
MOVBTS: LSH T2,P2WLSH ;CONVERT PAGE NUMBER TO ADDRESS
MOVE T1,EPTADR ;GET OUR EPT ADDRESS
SUBI T1,EPTOFS ;COMPUTE PHYSICAL BOOT ORIGIN
CAMN T2,T1 ;MOVING TO THE SAME SPOT?
POPJ P, ;YES, JUST RETURN
ADDI T2,EPTOFS ;COMPUTE NEW PHYSICAL EPT ADDRESS
MOVEM T2,EPTADR ;STORE PHYSICAL ADDRESS OF NEW EPT
SUBI T2,EPTOFS ;BACK TO NEW ORIGIN
MOVEM T2,BTBOT ;STORE NEW START OF BOOTSTRAP
HRRZ T1,BTSVEC+.BTSIZ ;GET +SIZE IN WORDS
ADD T1,T2 ;GET NEW FIRST-FREE
MOVEM T1,BTTOP ;SAVE IT
LSH T2,W2PLSH ;CONVERT ORIGIN BACK TO PAGE NUMBER
HLLZ T1,BTSVEC+.BTSIZ ;GET -SIZE IN PAGES
MOVE T3,T2 ;FIRST PHYSICAL PAGE
HRLI T3,(<PM.DCD>B2+PM.WRT) ;BITS
MOVEM T3,EPT+.MMOVE(T1) ;STORE NEXT POINTER
AOS T3 ;NEXT PHYSICAL PAGE
AOBJN T1,.-2 ;SETUP POINTERS FOR ALL PAGES
MOVE T1,CPEBR ;GET CURRENT MAPPING
XCT CHGEBR ;CAUSE THE PAGE TABLE TO BE FLUSHED
PUSH P,T1 ;SAVE MAPPING
HRRZ T1,BTSVEC+.BTSIZ ;GET SIZE IN WORDS
ADDI T1,.VMOVE ;COMPUTE END BLT ADDRESS
MOVE T4,[.VBOOT,,.VMOVE] ;SETUP BLT WORD TO MOVE IT ALL
BLT T4,-1(T1) ;DO SO
HRR T3,T2 ;FIRST PHYSICAL PAGE + BITS
ADDI T3,EPTPAG ;OFFSET TO THE EPT
MOVEM T3,.VMOVE+EPTOFS+540 ;POINTER TO SECTION 0 MAP
HLLZ T4,BTSVEC+.BTSIZ ;GET -SIZE IN PAGES
SUBI T3,EPTPAG ;BACK TO THE NEW ORIGIN PAGE
MOVEM T3,.VMOVE+.MBOOT+EPTOFS(T4) ;STORE NEXT POINTER
AOS T3 ;NEXT PHYSICAL PAGE
AOBJN T4,.-2 ;SETUP POINTERS FOR ALL PAGES
ADDI T2,EPTPAG ;OFFSET TO THE EPT PAGE AGAIN
POP P,T1 ;RESTORE MAPPING
IFN FTKL10,<
TRZ T1,LG.EPT ;CLEAR OLD PAGE NUMBER
MOVEI T4,LG.IAM(T2) ;GET ARGUMENT TO CHANGE
HRLI T4,(XG.LAB!LG.LPC!XG.LUB) ; UBR ALSO
>
IFN FTKS10,<
TRZ T1,SG.EPT ;CLEAR OLD PAGE NUMBER
MOVEI T4,(T2) ;GET ARGUMENT TO CHANGE
HRLI T4,(XG.LAB!XG.LUB) ; UBR ALSO
>
IORI T1,(T2) ;INSERT NEW EPT PAGE NUMBER
MOVEM T1,.VMOVE+CPEBR-.VBOOT ;STORE NEW MAPPING
XCT CHGEBR ;CONTINUE EXECUTION AT TOP OF CORE
XCT CHGUBR ;CHANGE UPT ALSO
IFN FTTAPE,<
SKIPE NOTAPE ;MAGTAPE DRIVERS PRESENT?
POPJ P, ;NO, THAT'S ALL WE NEED TO DO
PUSH P,R ;SAVE R A BIT
MOVEI R,TAPBUF ;GET MAGTAPE BUFFER ADDRESS
PUSHJ P,MAPADR ;CONVERT TO A PHYSICAL ADDRESS
MOVEM R,TAPBFA ;SAVE FOR USE BY READ ROUTINES
IFN FTDX10,<
MOVEI R,CHPRG ;GET DX10 CHANNEL PROGRAM BUFFER ADDRESS
PUSHJ P,MAPADR ;CONVERT TO A PHYSICAL ADDRESS
MOVEM R,CHPRGA ;SAVE
MOVEI R,CHSNS ;GET DX10 SENSE BUFFER ADDRESS
PUSHJ P,MAPADR ;CONVERT TO A PHYSICAL ADDRESS
MOVEM R,CHSNSA ;SAVE
>; END IFN FTDX10
POP P,R ;RESTORE R
>; END IFN FTTAPE
POPJ P, ;RETURN
; HERE TO ZERO CORE.
ZERCOR: HLRE T1,BTSVEC+.BTSIZ ;GET -SIZE IN PAGES
MOVNS T1 ;MAKE POSITIVE
PUSH P,T1 ;SAVE FOR COMPARE
MOVE T2,EPTADR ;GET OUR EPT ADDRESS
LSH T2,W2PLSH ;CONVERT TO A PAGE NUMBER
MOVEI T4,-EPTPAG(T2) ;GET BOOT ORIGIN PAGE NUMBER
MOVE T2,MEMPSZ ;GET NUMBER OF PAGES DESCRIBED BY NXMTAB
SUBI T2,1 ;CALCULATE THE HIGHEST PAGE # IN CORE
ZERCO1: MOVEI T1,(T4) ;GET PAGE NUMBER
ADD T1,(P) ;POINT PAST THE END OF BOOT
CAIL T2,(T4) ;IS THIS PAGE
CAILE T2,-1(T1) ; OCCUPIED BY BOOT?
PUSHJ P,CHKNXM ;NO, DOES IT EXIST?
JRST ZERCO2 ;NO, TRY NEXT
HRLI T1,(<PM.DCD>B2+PM.WRT) ;ACCESS BITS
HRR T1,T2 ;PAGE NUMBER
MOVEM T1,EPT+.MZERO ;SETUP MAPPING TO ZERO THE PAGE
CLRPT .VZERO ;FLUSH PAGE TABLE FOR THAT PAGE
MOVE T3,[.VZERO,,.VZERO+1] ;SETUP BLT POINTER
SKIPN T2 ;ABOUT TO DO PAGE 0?
ADJSP T3,40 ;YES, DON'T CLEAR 0-37
SETZM -1(T3) ;CLEAR FIRST WORD OF PAGE
BLT T3,.VZERO+PAGSIZ-1 ;DO IT ALL
ZERCO2: SOJGE T2,ZERCO1 ;LOOP IF MORE TO DO
POP P,(P) ;PHASE STACK
POPJ P, ;RETURN
;HERE TO DESTROY MAGTAPE DRIVERS BY MOVING MICROCODES, ETC., DOWNWARD.
IFN FTTAPE,<
ZAPTAP: HLRZ T1,BTSVEC+.BTDDT ;GET DDT ENTRY INSTRUCTION
CAIE T1,(JFCL) ;EDDT LOADED?
POPJ P, ;YES, DON'T BOTHER
SETOM NOTAPE ;REMEMBER THEY'RE GONE
HRRZ T1,BTSVEC+.BTSIZ ;GET SIZE IN WORDS
SUBI T1,BTSEND-BTSVEC ;COMPUTE NUMBER OF WORDS TO MOVE
JUMPE T1,ZAPTP1 ;JUMP IF NOTHING TO MOVE
ADDI T1,TAPBEG ;ADD IN DESTINATION ADDRESS
MOVE T2,[BTSEND,,TAPBEG] ;SET UP BLT TO OVERWRITE TAPE DRIVERS
BLT T2,-1(T1) ;MOVE IT ALL
ZAPTP1: HRRZ T1,BTSVEC+.BTSIZ ;GET SIZE IN WORDS AGAIN
SUBI T1,<BTSEND-TAPBEG> ;AMOUNT WE'VE SHRUNK BY
HRRM T1,BTSVEC+.BTSIZ ;SAVE NEW SIZE
ADDI T1,PAGSIZ-1 ;ROUND UP TO A PAGE BOUNDARY
LSH T1,W2PLSH ;CONVERT TO NUMBER OF PAGES
MOVNS T1 ;NEGATE IT
HRLM T1,BTSVEC+.BTSIZ ;SAVE NEW -VE SIZE IN PAGES
MOVNI T1,BTSEND-TAPBEG ;AMOUNT TO ADJUST MICROCODE POINTERS BY
MOVSI T2,-UCDNUM ;GET A POINTER TO MICROCODE STORAGE
ZAPTP2: SKIPE BTSVEC+.BTUCD(T2) ;IS THERE A MICROCODE HERE?
ADDM T1,BTSVEC+.BTUCD+1(T2) ;YES, ADJUST THE POINTER
AOBJN T2,.+1 ;ADVANCE POINTER
AOBJN T2,ZAPTP2 ;LOOP FOR ALL
;MUST MOVE TO TOP OF CORE HERE
POPJ P, ;FOR NOW
>; END IFN FTTAPE
SUBTTL NXMTAB HANDLING ROUTINES
;ROUTINE TO FIND MBTPGS CONTIGUOUS PAGES STARTING AT THE TOP OF
;CORE SO THAT WE CAN MOVE BOOT THERE.
;CALL: PUSHJ P,FINDHI
;RETURN+1 ALWAYS WITH STARTING PAGE NUMBER IN T2
FINDHI: MOVE T2,MEMPSZ ;GET NUMBER OF PAGES IN CORE
FINDH1: HLRE T1,BTSVEC+.BTSIZ ;GET -SIZE IN PAGES
MOVNS T1 ;MAKE POSITIVE
FINDH2: SOS T2 ;DECREMENT PAGE NUMBER
PUSHJ P,CHKNXM ;DOES THIS PAGE EXIST?
JRST FINDH1 ;NO, RESET COUNT AND TRY AGAIN
SOJG T1,FINDH2 ;YES, DECREMENT PAGE AND CHECK IT
POPJ P, ;FOUND THEM, RETURN PAGE # IN T2
;ROUTINE TO FIND A CONTIGUOUS GROUP OF PAGES WHICH EXIST BY LOOKING
;THROUGH NXMTAB. I KNOW THAT THIS ISN'T PARTICULARLY FAST BUT I WAS
;IN A HURRY.
;CALL:
; P2/PAGE NUMBER OF WHERE TO START
; PUSHJ P,FNDPGS
;RETURN+1 ALWAYS
;RETURNS P1=COUNT OF PAGES
; P2=STARTING PAGE NUMBER
FNDPGS: MOVEI P1,0 ;START WITH NO PAGES FOUND
SOS P2 ;TAKE A RUNNING START AT THE LOOP
FNDPG1: AOS T2,P2 ;INCREMENT PAGE NUMBER, COPY TO T2
CAML T2,MEMPSZ ;OFF THE END OF MEMORY?
POPJ P, ;YES, RETURN WITH P1=0
PUSHJ P,CHKNXM ;DOES THAT PAGE EXIST?
JRST FNDPG1 ;NO, LOOP FOR NEXT
FNDPG2: CAMGE T2,MEMPSZ ;OFF THE END OF MEMORY?
PUSHJ P,CHKNXM ;NO, DOES THIS PAGE EXIST?
POPJ P, ;NO, RETURN
AOS P1 ;INCREMENT COUNT OF PAGES
AOJA T2,FNDPG2 ;INCREMENT PAGE NUMBER AND LOOP
;ROUTINE TO CHECK NXMTAB TO SEE IF A PAGE EXISTS.
;CALL:
; T2/PHYSICAL PAGE NUMBER
; PUSHJ P,CHKNXM
;RETURN+1 IF MARKED AS NXM
;RETURN+2 IF NOT
;PRESERVES T2, DESTROYS T3
CHKNXM: PUSH P,T2 ;SAVE PAGE NUMBER
IDIVI T2,^D36 ;DIVIDE BY THE NUMBER OF BITS PER WORD
MOVE T2,NXMTAB(T2) ;GET THE WORD CONTAINING THE BIT
LSH T2,(T3) ;SHIFT NXM BIT TO 1B0
SKIPL T2 ;MARKED AS A NXM?
AOS -1(P) ;NO, GIVE SKIP RETURN
POP P,T2 ;RESTORE T2
POPJ P, ;RETURN
;ROUTINE TO BUILD NXMTAB BY TOUCHING EVERY POSSIBLE PAGE IN MEMORY
;TO SEE IF IT EXISTS.
;CALL: PUSHJ P,SUNXMT
;RETURN+1 ALWAYS
SUNXMT: PUSHJ P,SAVE2 ;SAVE P1-P2
JRST SUNXM2 ;SKIP AOUND ERROR RECOVERY CODE
SUNXM1: MOVEI T1,[ASCIZ /%Memory interleaved wrong/]
PUSHJ P,PRMSG ;PRINT WARNING
PUSHJ P,PRCRLF ;END LINE
MOVEI T1,[ASCIZ /Type RETURN when ready to proceed: /]
MOVEI T2,[0] ;DEFAULT ANSWER IS CR
PUSHJ P,REDLIN ;READ ANSWER
SUNXM2: SETZM NXMTAB ;ZERO FIRST WORD OF NXMTAB
MOVE T1,[NXMTAB,,NXMTAB+1] ;GET BLT POINTER
BLT T1,NXMTAB+NXMLEN-1 ;ZERO IT ALL
MOVSI P1,-MAXPGS ;GET LOOP COUNT FOR ALL POSSIBLE PAGES
MOVEI P2,0 ;P2 WILL BE HIGHEST PAGE SEEN
MOVE T2,[POINT 1,NXMTAB] ;GET BYTE POINTER TO NXMTAB
MOVEI T3,1 ;AND A BIT TO USE
SUNXM3: IBP T2 ;STEP BYTE POINTER TO NEXT BIT
PUSHJ P,REFMEM ;TOUCH THAT PAGE
JRST SUNXM1 ;INTERLEAVING ERROR
SKIPA ;NXM
SKIPA P2,P1 ;EXISTS, MOVE NUMBER TO P2
DPB T3,T2 ;SET THE BIT FOR THIS PAGE
AOBJN P1,SUNXM3 ;LOOP FOR ALL PAGES
ADDI P2,1 ;P2:=NUMBER OF PAGES IN MEMORY
HRRZM P2,MEMPSZ ;STORE FOR LATER
SUNXM4: IDPB T3,T2 ;STORE 1'S IN THE REST
TLNE T2,(77B5) ; OF THE FINAL
JRST SUNXM4 ; WORD
SETOM NXMFLG ;NXMTAB IS VALID
POPJ P, ;AND RETURN
;ROUTINE TO DETERMINE IF A PAGE EXISTS IN MEMORY BY TOUCHING
;THAT PAGE. NOTE THAT THE PAGE FAIL TRAP ADDRESS IN THE UPT HAS
;BEEN CHANGED TO POINT AT REFTRP BY THE CALLER.
;CALL:
; P1/PHYSICAL PAGE NUMBER
; PUSHJ P,REFMEM
;RETURN+1 IF INTERLEAVING ERROR
;RETURN+2 IF PAGE DOES NOT EXIST
;RETURN+3 IF PAGE EXISTS
REFMEM: PUSH P,T1 ;SAVE T1
PUSH P,T2 ;SAVE T2
PUSH P,EPT+.LMPFN+1 ;SAVE PAGE FAIL NEW PC
MOVEI T1,REFTRP ;NEED NEW PC SINCE NXM'S SOMETIMES
MOVEM T1,EPT+.LMPFN+1 ; CAUSE AR/ARX PARITY ERRORS
CONO APR,CLRAPR ;CLEAR APR ERRORS
MOVE T1,P1 ;PAGE NUMBER
HRLI T1,(<PM.DCD>B2+PM.WRT) ;ACCESS BITS
MOVEM T1,EPT+.MZERO ;USE .VZERO AS TEMPORARY PAGE
CLRPT .VZERO ;FLUSH THE PAGE TABLE FOR THAT PAGE
MOVSI T1,-MEMITL ;INTERLEAVE COUNTER
SETZ T2, ;CLEAR A FLAG
REFME1: MOVES .VZERO(T1) ;TOUCH THE PAGE
REFTRP:
IFN FTKL10,<CONSZ APR,LP.NXM> ;SEE A NXM?
IFN FTKS10,<CONSZ APR,SP.NXM> ;SEE A NXM?
AOS T2 ;YES--COUNT IT
AOBJN T1,REFME1 ;LOOP BACK FOR MORE
SKIPN T2 ;ALL ADDRS REFERENCED OK?
AOSA -3(P) ;EITHER REAL NXM OR GOOD ADDRESS
CAIN T2,MEMITL ;ALL ADDRS GIVE NXM IF INTERLEAVING OK
AOS -3(P) ;REAL NXM
POP P,EPT+.LMPFN+1 ;RESTORE OLD PAGE FAIL TRAP ADDRESS
POP P,T2 ;RESTORE T2
POP P,T1 ;RESTORE T1
CONO APR,CLRAPR ;CLEAR APR ERRORS
POPJ P, ;RETURN
SUBTTL TRAP HANDLING
;HERE ON A TRAP OTHER THAN A PAGE FAIL.
TRAP: MOVEI T1,[ASCIZ/?Trap other than page fail
MUUO Flags, Opcode, AC = /]
PUSHJ P,PRMSG
MOVE T4,EPT+.UPMUO ;GET MUUO
PUSHJ P,PRHWD ;PRINT AS HALF WORDS
MOVEI T1,[ASCIZ/
MUUO PC = /]
PUSHJ P,PRMSG
MOVE T4,EPT+.UPMUP ;GET OLD PC WORD
PUSHJ P,PRHWD ;PRINT AS HALF WORDS
MOVEI T1,[ASCIZ/
MUUO EA = /]
PUSHJ P,PRMSG
MOVE T4,EPT+.UPMUE ;GET MUUO EFFECTIVE ADDRESS
PUSHJ P,PRHWD ;PRINT AS HALF WORDS
JRST PFTRA1 ;JOIN COMMON EXIT CODE
;HERE ON A PAGE FAIL TRAP
PFTRAP: MOVEI T1,[ASCIZ/?Page fail trap
PFW = /]
PUSHJ P,PRMSG ;PRINT ERROR MESSAGE
MOVE T4,EPT+.LMPFW ;GET PAGE FAIL WORD
PUSHJ P,PRHWD ;PRINT AS HALF-WORDS
MOVEI T1,[ASCIZ/
PF Flags = /]
PUSHJ P,PRMSG
MOVE T4,EPT+.LMPFP ;GET PC FLAGS
PUSHJ P,PRHWD ;PRINT AS HALF-WORDS
MOVEI T1,[ASCIZ/
PF PC = /]
PUSHJ P,PRMSG
MOVE T4,EPT+.LMPFP+1 ;GET PC OF FAILURE
PUSHJ P,PRHWD ;PRINT IT AS HALF WORDS
PFTRA1: PUSHJ P,PRTHDW ;PRINT APR, EBR, AND UBR STATUS
JRST RESTAR ;RESTART AT THE BEGINNING
; ROUTINE TO PRINT THE HARDWARE STATUS (APR, RDERA, EBR, AND UBR)
; CALL: PUSHJ P,PRTHDW
; RETURN+1 ALWAYS
PRTHDW: MOVEI T1,[ASCIZ/
CONI APR, = /]
PUSHJ P,PRMSG
CONI APR,T4 ;GET CONI APR
PUSHJ P,PRHWD ;PRINT AS HALF WORDS
IFN FTKL10,<
MOVEI T1,[ASCIZ/
RDERA = /]
PUSHJ P,PRMSG
RDERA T4 ;GET ERA
PUSHJ P,PRHWD ;PRINT AS HALF WORDS
>
MOVEI T1,[ASCIZ/
CONI PAG, = /]
PUSHJ P,PRMSG
CONI PAG,T4 ;GET EBR
PUSHJ P,PRHWD ;PRINT AS HALF-WORDS
MOVEI T1,[ASCIZ/
DATAI PAG, = /]
PUSHJ P,PRMSG
DATAI PAG,T4 ;GET UBR
PUSHJ P,PRHWD ;PRINT AS HALF-WORDS
PJRST PRCRLF ;END LINE AND RETURN
SUBTTL COMMAND PARSING
;ROUTINE TO PARSE A COMMAND LINE. CALL WITH FL.CMD OR FL.1CM SET
;RETURNS WITH THE FILESPEC VARIABLE AND BITS IN S SETUP.
;CALL: PUSHJ P,PARSE
;RETURN+1 IF ERROR DETECTED AND MESSAGE ISSUED
;RETURN+2 IF NO ERRORS DETECTED
PARSE: SETZM R.BEG ;CLEAR FIRST WORD OF FILESPEC
MOVE T1,[R.BEG,,R.BEG+1] ;SETUP FOR BLT
BLT T1,R.END-1 ;CLEAR IT ALL
TDZA S,[FX.CLR-FR.DMP] ;CLEAR FLAG BITS AND GET FIRST ATOM
PARSE1: TDZA T1,T1 ;CLEAR ATOM, SKIP CALL TO GETSIX
PARSE2: PUSHJ P,GETSIX ;GET SIXBIT ATOM IN T1
MOVSI T2,-TRMTBL ;-VE LENGTH OF TERMINATING CHAR TABLE
PARSE3: HLRZ T4,TRMTAB(T2) ;GET NEXT POSSIBLE CHARACTER FROM TABLE
CAIE T4,(T3) ;MATCH WITH THE ONE WE SAW?
AOBJN T2,PARSE3 ;NO, LOOP
HRRZ T4,TRMTAB(T2) ;GET DISPATCH ADDRESS FOR ATOM
JUMPL T2,(T4) ;GO TO ROUTINE IF MATCH FOUND
CMDERR: MOVEI T1,[ASCIZ/%Syntax error
/]
PJRST PRMSG ;TELL OF ERROR AND RETURN
IFN FTTAPE,<
TAPERR: MOVEI T1,[ASCIZ/%Tape drivers not present
/]
PJRST PRMSG ;TELL OF ERROR AND RETURN
>; END IFN FTTAPE
;TABLE OF LEGAL CHARACTERS TERMINATING COMMAND STRING ATOMS AND
;THE CORRESPONDING DISPATCH ADDRESSES. FORMAT IS:
; XWD CHAR,ADDRESS
TRMTAB: XWD ":",CMDDEV ;DEVICE SEEN
XWD ".",CMDFIL ;FILENAME SEEN
XWD "[",CMDPTH ;START OF PATCH SEEN
XWD "/",CMDSWT ;SWITCH SEEN
XWD .CHCRT,CMDEOL ;END OF LINE SEEN
XWD 0,BTXEOL ;END OF BOOTXT (ASCIZ)
TRMTBL==.-TRMTAB ;LENGTH OF TABLE
;HERE TO PROCESS DEVICE IN COMMAND STRING
CMDDEV: TRON S,FR.DEV ;ALREADY HAVE A DEVICE?
SKIPN T1 ;NO, DEVICE NULL?
JRST CMDERR ;YES, ERROR
MOVEM T1,DEV ;STORE DEVICE
JRST PARSE2 ;AND GET NEXT ATOM
;HERE TO PROCESS FILENAME IN COMMAND STRING
CMDFIL: JSP T2,STOFIL ;STORE FILENAME AS NECESSARY
TROE S,FR.EXT ;FLAG AN EXTENSION SEEN
JRST CMDERR ;ERROR IF MORE THAN ONE
PUSHJ P,GETSIX ;GET EXTENSION
HLLZM T1,EXT ;STORE IT
JRST PARSE1 ;GET NEXT ATOM
;HERE TO PROCESS PATH SPEC IN COMMAND STRING
CMDPTH: JSP T2,STOFIL ;STORE FILENAME AS NECESSARY
PUSHJ P,GETOCT ;GET OCTAL PROJECT NUMBER
JUMPE T1,CMDERR ;NONE IS ILLEGAL
TRON S,FR.PTH ;ALREADY SEEN A PATH?
CAIE T3,"," ;MUST HAVE BROKEN ON A COMMA
JRST CMDERR ;ELSE ERROR
HRLZM T1,PTHBLK ;STORE IN PATH BLOCK
PUSHJ P,GETOCT ;GET PROGRAM NUMBER
JUMPE T1,CMDERR ;NONE IS ILLEGAL
HRRM T1,PTHBLK ;STORE IN PATH BLOCK
MOVSI W,-LIMLVL ;SETUP AOBJN POINTER TO SFD'S
CMDPT1: CAIE T3,"," ;SFD COMMING?
JRST CMDPT2 ;NO, OR NONE ALLOWED
PUSHJ P,GETSIX ;GET SFD NAME
JUMPE T1,CMDERR ;MUST NOT BE NULL
MOVEM T1,PTHBLK+1(W) ;STORE IN NEXT SLOT IN PATH BLOCK
AOBJN W,CMDPT1 ;LOOP FOR NEXT
CMDPT2: CAIN T3,"]" ;TERMINATE WITH RIGHT BRACKET?
JRST PARSE2 ;YES, GET NEXT ATOM
JRST PARSE1 ;NO, WORRY ABOUT THE CHARACTER
;HERE TO PROCESS THE END OF THE COMMAND LINE
BTXEOL: TLO S,(FL.CMD) ;FORCE NEXT READ FROM TERMINAL
CMDEOL: JSP T2,STOFIL ;STORE FILENAME AS NECESSARY
TRNE S,FR.DMP!FR.RBT ;/DUMP SEEN?
JRST CMDEO1 ;YES--DON'T TOUCH FILESPEC
TRNN S,FR.DEV!FR.FIL!FR.EXT!FR.PTH ;ANYTHING TYPED?
SKIPN BTSVEC+.BTDEV ;HAVE A FILESPEC FROM BEFORE?
JRST CMDEO1 ;YES--LEAVE FILESPEC ALONE
MOVE T1,[BTSVEC+.BTDEV,,DEV] ;SET UP BLT
BLT T1,PTHBLK+6 ;COPY IT
TRO S,FR.DEV!FR.FIL!FR.EXT!FR.PTH ;DEFAULT EVERYTHING ON
CMDEO1: SKIPN T1,DEV ;GET DEVICE NAME
MOVSI T1,'DSK' ;DEFAULT
MOVEM T1,DEV ;UPDATE
CAMN T1,['DSK '] ;GENERIC?
TLO S,(FL.WLD) ;YES, FLAG IT
MOVSI T1,'EXE' ;DEFAULT EXTENSION IS EXE
TRNN S,FR.EXT ;EXTENSION SEEN?
MOVEM T1,EXT ;NO, USE DEFAULT
MOVE T1,[1,,4] ;DEFAULT DIRECTORY IS [1,4]
SETZ T2, ;PATH TERMINATOR
TRNN S,FR.PTH ;PATH SEEN?
DMOVEM T1,PTHBLK ;NO, STORE DEFAULT
IFN FTTAPE,<
TRNE S,FR.TSB ;ANY TAPE-SPECIFIC BITS?
SKIPE TAPIDX ;YES, YOU'D BETTER HAVE SPEC'D A TAPE UNIT
SKIPA ;WE'LL LET YOU BY THIS TIME
JRST CMDERR ;BAD BOY, THAT'S AN ERROR
SKIPE TAPIDX ;LIKEWISE, IF A TAPE WAS SPECIFIED
SKIPN NOTAPE ; DRIVERS MUST STILL BE PRESENT
SKIPA ;NO SWEAT
JRST TAPERR ;NOPE
>; END IFN FTTAPE
MOVEI T1,SYSDDT ;GET ADDRESS OF EDDT START
TRNE S,FR.DDT ;USER SPECIFY /EDDT?
SKIPE STSA ; AND NO ADDRESS ON /START?
JRST CPOPJ1 ;NO TO FIRST OR YES TO SECOND
MOVEM T1,STSA ;FORCE A STARTING ADDRESS
JRST CPOPJ1 ;GIVE SKIP RETURN
;HERE TO PROCESS A SWITCH IN THE COMMAND STRING
CMDSWT: JSP T2,STOFIL ;STORE FILENAME AS NECESSARY
PUSHJ P,GETSIX ;GET THE SWITCH
MOVE T2,T1 ;COPY IT TO T2
SETOM W ;SET FULL WORD MASK
CMDSW1: LSH W,-6 ;SHIFT MASK 6
LSH T2,6 ;AND WORD BY SAME AMOUNT
JUMPN T2,CMDSW1 ;UNTIL IT'S NULL
MOVSI T4,-SWTTBL ;GET -VE LENGTH OF SWITCH TABLE
CMDSW2: MOVE T2,SWTTAB(T4) ;GET NEXT ENTRY IN SWITCH TABLE
TDZ T2,W ;MASK TO SAME SIZE AS WHAT USER TYPED
CAME T1,T2 ;MATCH?
AOBJN T4,CMDSW2 ;NO, LOOP FOR NEXT
TLZN T4,-1 ;CLEAR LH. FIND MATCH?
JRST CMDERR ;NO
CAIL T4,SWTTBS ;IS THIS A SPECIAL PROCESSING SWITCH?
JRST CMDSWS ;YES
MOVEI T1,FR.1ST ;GET FIRST SWITCH BIT IN S
LSH T1,(T4) ;SHIFT BY OFFSET INTO SWITCH TABLE
IORI S,(T1) ;SET SWITCH BIT IN S
CAIE T3,":" ;SWITCH HAVE A VALUE?
JRST PARSE1 ;NO, GET NEXT ATOM
CAIL T4,SWTVLL ;CAN THIS SWITCH LEGALLY HAVE A VALUE?
JRST CMDERR ;NO
PUSHJ P,GETOCT ;GET OCTAL VALUE FOR SWITCH
MOVEM T1,SWTVAL(T4) ;STORE VALUE IN TABLE
JRST PARSE1 ;AND GET NEXT ATOM
CMDSWS:
IFN FTTAPE,<
CAIL T4,SWTTBU ;MAGTAPE UNIT IDENTIFIER?
JRST CMDSWU ;YES
>; END IFN FTTAPE
JRST @SWTDSP-SWTTBS(T4) ;DISPATCH FOR THIS SPECIAL SWITCH
IFN FTTAPE,<
CMDSWU: HRROI T1,-SWTTBU(T4) ;GET OFFSET INTO READ/WRITE TABLES
MOVEM T1,TAPIDX ;SAVE UNIT TYPE INDEX
SETZM TAPUNI ;ASSUME DEFAULT UNIT SELECTION
CAIE T3,":" ;SWITCH HAVE A VALUE?
JRST PARSE1 ;NO, GET NEXT ATOM
PUSHJ P,GETOCT ;GET OCTAL VALUE FOR SWITCH
MOVEM T1,TAPUNI ;SAVE FOR LATER
JRST PARSE1 ;GET NEXT ATOM
>; END IFN FTTAPE
;TABLE OF LEGAL SWITCHES. NOTE THAT ALL SWITCHES THAT MAY HAVE
;AN OCTAL VALUE MUST OCCUR POSITIONALLY BEFORE THE SWTVLL'TH
;LOCATION IN THE TABLE. FURTHER NOTE THAT ALL MAGTAPE UNIT
;IDENTIFIERS APPEAR LAST IN THE TABLE.
SWTTAB: SIXBIT/START/ ;/START:N
SIXBIT/EDDT/ ;/EDDT
SIXBIT/LOAD/ ;/LOAD
SIXBIT/DUMP/ ;/DUMP
SIXBIT/REBOOT/ ;/REBOOT
SIXBIT/FORCE/ ;/FORCE
IFN FTTAPE,<
SIXBIT/REWIND/ ;/REWIND
SIXBIT/SKIP/ ;/SKIP
SIXBIT/NOREWI/ ;/NOREWIND
>; END IFN FTTAPE
SWTTBS==.-SWTTAB ;INDEX FOR FIRST SPECIAL PROCESSING SWITCH
IFN FTTAPE,<
SIXBIT/DENSIT/ ;/DENSITY:N
>; END IFN FTTAPE
IFN FTTAPE,<
SWTTBU==.-SWTTAB ;INDEX FOR FIRST MAGTAPE UNIT IDENTIFIER
IFN FTDX10,<
SIXBIT /DX10/ ;/DX10
>; END IFN FTDX10
IFN FTTM02,<
SIXBIT /TM02/ ;/TM02
>; END IFN FTTM02
IFN FTDX20,<
SIXBIT /DX20/ ;/DX20
>; END IFN FTDX20
IFN FTTM78,<
SIXBIT /TM78/ ;/TM78
>; END IFN FTTM78
>; END IFN FTTAPE
SWTTBL==.-SWTTAB
;PARALLEL DISPATCH TABLE FOR SPECIAL PROCESSING SWITCHES. MUST
;BE IN SAME ORDER AS ENTRIES IN SWTTAB STARTING AT OFFSET SWTTBS.
SWTDSP:
IFN FTTAPE,<
EXP SWTDEN ;/DENSITY
>; END IFN FTTAPE
;PROCESS /DENSITY SWITCH
IFN FTTAPE,<
SWTDEN: CAIE T3,":" ;MUST HAVE A VALUE
JRST CMDERR ;NOPE
PUSHJ P,GETSIX ;READ THE ATOM
MOVE T2,T1 ;COPY IT TO T2
SETOM W ;SET FULL WORD MASK
SWTDN1: LSH W,-6 ;SHIFT MASK 6
LSH T2,6 ;AND WORD BY SAME AMOUNT
JUMPN T2,SWTDN1 ;UNTIL IT'S NULL
MOVSI T4,-DENTBL ;GET -VE LENGTH OF DENSITY TABLE
SWTDN2: MOVE T2,DENTAB(T4) ;GET NEXT ENTRY IN DENSITY TABLE
TDZ T2,W ;MASK TO SAME SIZE AS WHAT USER TYPED
CAME T1,T2 ;MATCH?
AOBJN T4,SWTDN2 ;NO, LOOP FOR NEXT
TLZN T4,-1 ;CLEAR LH. FIND MATCH?
JRST CMDERR ;NO
MOVEI T1,1(T4) ;YES, MAKE DENSITY CODE 1-BASED
MOVEM T1,TAPDEN ;SAVE IT
JRST PARSE1 ;DONE
;TABLE OF LEGAL DENSITY VALUES
DENTAB: SIXBIT/200/ ;200 BPI
SIXBIT/556/ ;556 BPI
SIXBIT/800/ ;800 BPI
SIXBIT/1600/ ;1600 BPI
SIXBIT/6250/ ;6250 BPI
DENTBL==.-DENTAB
>; END IFN FTTAPE
SUBTTL COMMAND INPUT
;ROUTINE TO STORE A FILENAME IF REQUIRED.
;CALL:
; T1/FILENAME OR 0
; JSP T2,STOFIL
;RETURN+1 IF NO ERRORS
STOFIL: JUMPE T1,(T2) ;DON'T DO ANYTHING IF NOTHING TO STORE
TROE S,FR.FIL ;ALREADY SEEN A FILENAME?
JRST CMDERR ;YES, ERROR
MOVEM T1,FILNAM ;STORE FILENAME
JRST (T2) ;AND RETURN
;ROUTINE TO READ A SIXBIT NAME FROM THE COMMAND STRING.
;CALL: PUSHJ P,GETSIX
;RETURN+1 ALWAYS
;RETURNS NAME IN T1, BREAK CHARACTER IN T3
;DESTROYS T2
GETSIX: MOVEI T1,0 ;START WITH NULL NAME
MOVE T2,[POINT 6,T1] ;GET BYTE POINTER FOR ATOM
GETSI1: PUSHJ P,GETCHR ;GET NEXT CHARACTER FROM COMMAND
CAIL T3,"A" ;LETTER?
CAILE T3,"Z" ; ??
CAIA ;NO, CHECK DIGITS
JRST GETSI2 ;YES
CAIL T3,"0" ;NUMBER?
CAILE T3,"9" ; ??
POPJ P, ;NO, RETURN
GETSI2: TRC T3,"A"-'A' ;CONVERT ASCII TO SIXBIT
TLNE T2,770000 ;TOO MANY?
IDPB T3,T2 ;NO, STORE IN T1
JRST GETSI1 ;AND LOOP FOR NEXT
;ROUTINE TO RETURN AN OCTAL NUMBER FROM THE COMMAND STRING.
;CALL: PUSHJ P,GETOCT
;RETURN+1 ALWAYS
;RETURNS NUMBER IN T1, BREAK CHARACTER IN T3
GETOCT: MOVEI T1,0 ;START WITH NO NUMBER
GETOC1: PUSHJ P,GETCHR ;GET NEXT CHARACTER FROM COMMAND
CAIL T3,"0" ;NUMBER?
CAILE T3,"7" ; OCTAL THAT IS?
POPJ P, ;NO, RETURN
LSH T1,3 ;MAKE ROOM FOR IT
IORI T1,-"0"(T3) ;INCLUDE IN TOTAL
JRST GETOC1 ;LOOP FOR NEXT
;ROUTINE TO RETURN THE NEXT CHARACTER FROM THE COMMAND STREAM.
;CONVERTS LOWER TO UPPER CASE.
;CALL: PUSHJ P,GETCHR
;RETURN+1 ALWAYS WITH CHARACTER IN T3
GETCHR: TLNN S,(FL.1CM!FL.CMD) ;WANT TO READ FROM COMMAND BUFFER?
ILDB T3,BTXPTR ;NO, READ FROM BOOTXT
TLNE S,(FL.1CM!FL.CMD) ;SAME QUESTION
ILDB T3,CMDPTR ;ONLY THIS TIME READ FROM COMMAND BUFFER
CAIE T3," " ;SPACE?
CAIN T3,.CHTAB ; OR TAB?
MOVEI T3,.CHCRT ;YES, RETURN CR
CAIL T3,"a" ;LOWER CASE?
CAILE T3,"z" ;??
POPJ P, ;NO
SUBI T3,"a"-"A" ;YES, CONVERT TO UPPER
POPJ P, ;AND RETURN
;ROUTINE TO ASK A QUESTION AND GIVE SKIP RETURN IF ANSWER WAS YES.
;CALL:
; T1/ADDRESS OF QUESTION STRING
; T2/ADDRESS OF DEFAULT ANSWER STRING
; PUSHJ P,ASKYN
;RETURN+1 IF NEITHER YES OR NO
;RETURN+2 IF ANSWER WAS NO
;RETURN+3 IF ANSWER WAS YES
ASKYN: TLZ S,(FL.DEF) ;WE DO WANT TO ALLOW DEFAULTING
PUSHJ P,REDLIN ;ASK QUESTION, READ ANSWER
TLO S,(FL.1CM) ;FORCE READ FROM COMMAND BUFFER
PUSHJ P,GETCHR ;GET FIRST CHARACTER
SKIPE USRFLG ;USER MODE?
CLRBFI ;YES--ZAP REMAINDER OF INPUT BUFFER
TLZ S,(FL.1CM) ;CLEAR FLAG
CAIN T3,"N" ;NO?
JRST CPOPJ1 ;GIVE SKIP
CAIE T3,"Y" ;YES?
POPJ P, ;USER DOESN'T KNOW WHAT'S GOING ON
CPOPJ2: AOS 0(P) ;DOUBLE SKIP
CPOPJ1: AOS 0(P) ;YES, GIVE SKIP RETURN
CPOPJ: POPJ P, ;RETURN
;ROUTINE TO PRINT A PROMPT STRING, AND READ A COMMAND LINE INTO
;CMDBUF. DOES LOCAL EDITING OF RUBOUT AND ^U AND DEFAULT STRING IF
;THE OPERATOR DOESN'T ANSWER OR SCHED IS 400.
;CALL:
; T1/ADDRESS OF PROMPT STRING
; T2/ADDRESS OF DEFAULT ANSWER STRING
; PUSHJ P,REDLIN
;RETURN+1 ALWAYS WITH LINE IN CMDBUF
REDLIN: PUSHJ P,SAVE2 ;SAVE P1-P2
PUSH P,T1 ;SAVE ADDRESS OF PROMPT STRING
HRLI T2,(POINT 7,0) ;MAKE BYTE POINTER TO DEFAULT STRING
PUSH P,T2 ; AND SAVE IT
REDLI1: MOVE T1,-1(P) ;RESTORE ADDRESS FOR SUBSEQUENT TIMES
PUSHJ P,PRMSG ;TYPE PROMPT STRING
MOVE P1,[POINT 7,CMDBUF] ;GET POINTER TO BUFFER
MOVEM P1,CMDPTR ;SAVE FOR CALLER
SETZM CMDBUF ;SET TO CLEAR BUFFER
MOVE T1,[CMDBUF,,CMDBUF+1] ;SETUP FOR BLT
BLT T1,CMDBUF+LINBFL-1 ;ZERO IT ALL
TLZ S,(FL.RUB) ;CLEAR RUBOUT FLAG
MOVEI P2,<LINBFL*5>-5 ;MAX CHARACTERS
REDLI2: PUSHJ P,TYI ;READ A CHARACTER
ILDB T3,0(P) ;TIMED OUT, GET ONE FROM DEFAULT STRING
CAIE T3,.CHCNH ;BACKSPACE?
CAIN T3,.CHDEL ; OR RUBOUT?
JRST REDRUB ;YES
CAIN T3,.CHCNU ;^U?
JRST REDCNU ;YES
CAIN T3,.CHCNR ;^R?
JRST REDCNR ;YES
JUMPN T3,REDLI3 ;READ LAST CHARACTER OF DEFAULT STRING?
MOVEI T1,[ASCIZ/ ;Default answer/] ;TELL HIM WHAT HAPPENED
PUSHJ P,PRMSG ;FOR POST MORTUM
MOVEI T3,.CHCRT ;AND TURN IT INTO A CR
REDLI3: CAIE T3,.CHCRT ;END OF LINE?
SOSL P2 ;IGNORE IF TOO MANY
IDPB T3,P1 ;STASH CHAR
TLZE S,(FL.RUB) ;POST PROCESS RUBOUT
PUSHJ P,PRBSL ;BY PRINTING BACKSLASH
LDB T3,P1 ;GET CHAR BACK
SKIPN USRFLG ;MONITOR DOES ECHOING IN USER MODE
PUSHJ P,ECHO ;AND ECHO CHARACTER
LDB T3,P1 ;ONCE MORE
CAIE T3,.CHCRT ;END-OF LINE?
JRST REDLI2 ;NO, LOOP
POP P,(P) ;FLUSH STACK
TPOPJ: POP P,T1 ;RESTORE T1
POPJ P, ;AND RETURN
;HERE TO PROCESS RUBOUTS
REDRUB: CAIN P2,<LINBFL*5>-5 ;CHECK FOR BEGINNING OF LINE
JRST REDRU1 ;YES
TLON S,(FL.RUB) ;CHECK HERE BEFORE?
PUSHJ P,PRBSL ;NO, TYPE BACKSLASH
LDB T3,P1 ;GET CHAR
PUSHJ P,ECHO ;PRINT IT
SETZ T3, ;KEEP BUFFER ASCIZ
DPB T3,P1 ;FOR ^R
MOVNI T3,1 ;WANT TO BACKUP POINTER BY
EXCH T3,P1 ;BY 1 BYTE POSITION
ADJBP P1,T3 ;DO IT THE EASY WAY
AOJA P2,REDLI2 ;GET NEXT CHAR
;HERE TO PROCESS BEGINNING OF LINE ON RUBOUT
REDRU1: TLZE S,(FL.RUB) ;NEED TO TYPE A BACKSLASH?
PUSHJ P,PRBSL ;YES, DO SO
JRST REDCU1 ;JOIN COMMON CODE
;HERE TO PROCESS ^U
REDCNU: PUSHJ P,ECHO ;ECHO AS UPARROW U
REDCU1: PUSHJ P,PRCRLF ;TYPE CRLF
JRST REDLI1 ;RETYPE PROMPT AND TRY AGAIN
;HERE TO PROCESS ^R
REDCNR: PUSHJ P,PRCRLF ;ECHO AS <CR><LF>
MOVE T1,-1(P) ;GET PROMPT ADDRESS
PUSHJ P,PRMSG ;ECHO IT BACK
MOVEI T1,CMDBUF ;GET ADDRESS OF TYPEIN
PUSHJ P,PRMSG ;THUS
TLZ S,(FL.RUB) ;NOT IN \ ANY MORE
JRST REDLI2 ;ONWARD
SUBTTL COMMAND OUTPUT
;ROUTINES TO PRINT SELECTED CHARACTERS.
;
; PRCRLF - PRINT CRLF
; PRBSL - PRINT BACKSLASH
; PRCOMA - PRINT COMMA
; PRLBKT - PRINT LEFT BRACKET
; PRRBKT - PRINT RIGHT BRACKET
; PRRBCR - PRINT RIGHT BRACKET AND CRLF
PRRBCR: PUSHJ P,PRRBKT ;PRINT RIGHT BRACKET AND FALL INTO PRCRLF
PRCRLF: MOVEI T3,.CHCRT ;GET A CR
PUSHJ P,TYO
MOVEI T3,.CHLFD ;GET A LF
PJRST TYO ;TYPE IT AND RETURN
PRDOT: SKIPA T3,["."] ;GET A PERIOD
PRCOL: MOVEI T3,":" ;GET A COLON
PJRST TYO ;TYPE IT AND RETURN
PRBSL: SKIPA T3,["\"] ;GET A BACKSLASH
PRCOMA: MOVEI T3,"," ;GET A COMMA
PJRST TYO ;TYPE IT AND RETURN
PRLBKT: SKIPA T3,["["] ;GET A LEFT BRACKET
PRRBKT: MOVEI T3,"]" ;GET A RIGHT BRACKET
PJRST TYO ;TYPE IT AND RETURN
;ROUTINE TO PRINT AN ASCIZ MESSAGE ON THE CTY.
;CALL:
; T1/ADDRESS OF ASCIZ STRING
; PUSHJ P,PRMSG
;RETURN+1 ALWAYS
;DESTROYS T1,T3
PRMSG: HRLI T1,(POINT 7,) ;FORM 7 BIT BYTE POINTER
PRMSG1: ILDB T3,T1 ;GET NEXT CHARACTER
JUMPE T3,CPOPJ ;RETURN ON NULL
PUSHJ P,TYO ;TYPE CHARACTER
JRST PRMSG1 ;LOOP FOR NEXT
;ROUTINE TO PRINT A SIXBIT WORD ON THE CTY.
;CALL:
; T1/SIXBIT WORD
; PUSHJ P,PRSIX
;RETURN+1 ALWAYS
;DESTROYS T1,T2,T3
PRSIX: LSHC T1,-^D36 ;MOVE WORD TO T2, CLEAR T1
LSHC T1,6 ;MOVE NEXT BYTE TO T1
MOVEI T3,"A"-'A'(T1) ;CONVERT TO ASCII AND COPY TO T3
PUSHJ P,TYO ;PUT IT OUT
SKIPE T1,T2 ;MOVE REMAINDER BACK TO T1, SKIP IF DONE
JRST PRSIX ;LOOP FOR REST
POPJ P, ;RETURN
;ROUTINE TO PRINT AN OCTAL NUMBER ON THE CTY.
;CALL:
; T1/NUMBER TO PRINT
; PUSHJ P,PROCT
;RETURN+1 ALWAYS
;DESTROYS T1,T2,T3
PROCT: IDIVI T1,^D8 ;DIVIDE BY RADIX, REMAINDER IN T2
HRLM T2,0(P) ;STORE ON STACK
SKIPE T1 ;DONE?
PUSHJ P,PROCT ;NO, LOOP
HLRZ T3,0(P) ;GET DIGIT FROM STACK
ADDI T3,"0" ;CONVERT TO ASCII
PJRST TYO ;OUTPUT IT AND RETURN TO CALLER
;ROUTINE TO PRINT A WORD AS TWO 6 DIGIT OCTAL NUMBERS SEPARATED
;BY TWO COMMAS.
;CALL:
; T4/WORD
; PUSHJ P,PRHWD
;RETURN+1 ALWAYS
PRHWD: PUSHJ P,PRHWD1 ;PRINT LEFT HALF
MOVEI T1,[ASCIZ/,,/] ;FOLLOWED BY
PUSHJ P,PRMSG ; TWO COMMAS
JRST PRHWD1 ;GO PRINT RH
PRHWDR: HRLZS T4 ;PUT WORD IN LH
PRHWD1: MOVEI T1,6 ;LOOP COUNT IS 6
PRHWD2: MOVE T3,T4 ;MOVE WORD TO T3
LSHC T3,-^D33 ;KEEP 1 DIGIT, CLEAR REST OF T3
ADDI T3,"0" ;CONVERT TO ASCII
PUSHJ P,TYO ;PUT IT OUT
SOJG T1,PRHWD2 ;LOOP FOR ALL
POPJ P, ;RETURN
;ROUTINE TO PRINT A WORD AS A STANDARD FORMAT VERSION NUMBER.
;CALL:
; T1/WORD
; PUSHJ P,PRVRSN
;RETURN+1 ALWAYS
PRVRSN: MOVE T4,T1 ;PUT IN SAFE PLACE
LDB T1,[POINT 9,T4,11] ;GET MAJOR VERSION
SKIPE T1 ;IF NON-ZERO,
PUSHJ P,PROCT ;PRINT IN OCTAL
LDB T1,[POINT 6,T4,17] ;GET MINOR VERSION
JUMPE T1,PRVRS2 ;IF NON-ZERO,
SOS T1 ; PRINT IN MODIFIED
IDIVI T1,^D26 ; RADIX 26 ALPHA
JUMPE T1,PRVRS1 ; JUMP IF ONE CHAR
MOVEI T3,"A"-1(T1) ; ISSUE FIRST OF TWO
PUSHJ P,TYO ; CHARACTERS
PRVRS1: MOVEI T3,"A"(T2) ; ISSUE "UNITS"
PUSHJ P,TYO ; CHARACTER
PRVRS2: HRRZ T1,T4 ;GET EDIT NUMBER
JUMPE T1,PRVRS3 ;IF NON-ZERO,
MOVEI T3,"(" ; ISSUE
PUSHJ P,TYO ; AS OCTAL
HRRZ T1,T4 ; WITHIN
PUSHJ P,PROCT ; PARENTHESES
MOVEI T3,")" ; ..
PUSHJ P,TYO ; ..
PRVRS3: LDB T2,[POINT 3,T4,2] ;GET "WHO" FIELD
JUMPE T2,CPOPJ ;IF NON-ZERO,
MOVEI T3,"-" ; PRINT -
PUSHJ P,TYO ; AND THEN
MOVE T1,T2 ; THE FIELD
PJRST PROCT ; AS OCTAL
;ROUTINE TO PRINT ONE CHARACTER IN (POSSIBLY) UP-ARRROW FORMAT.
;CALL:
; T3/CHARACTER TO ECHO
; PUSHJ P,ECHO
;RETURN+1 ALWAYS
;DESTROYS T3
ECHO: CAIE T3,.CHTAB ;TAB?
CAIL T3," " ;NO, CONTROL CHARACTER?
PJRST TYO ;NO, JUST PRINT IT
CAIN T3,.CHCRT ;END-OF-LINE?
PJRST PRCRLF ;YES, ECHO CRLF
PUSH P,T3 ;SAVE CHAR
MOVEI T3,"^" ;PRINT CTRL CHAR
PUSHJ P,TYO ;...
POP P,T3 ;RESTORE CHARACTER
ADDI T3,"A"-1 ;CONVERT TO PRINTING CHARACTER
PJRST TYO ;PRINT IT AND RETURN
;ROUTINE TO PRINT THE CURRENT FILESPEC FROM THE DATA BASE.
;CALL: PUSHJ P,PRFILE
;RETURN+1 ALWAYS
;DESTROYS T1-T4
PRFILE: SKIPE USRFLG ;USER MODE?
JRST PRFIL2 ;YES, DIFFERENT PLACE
MOVE T1,DEV ;GET DEVICE NAME
PUSHJ P,PRSIX ;PRINT IT
PUSHJ P,PRCOL ;PRINT A COLON
MOVE T1,FILNAM ;GET THE FILENAME
PUSHJ P,PRSIX ;PRINT IT
PUSHJ P,PRDOT ;PRINT A DOT
HLLZ T1,EXT ;GET EXTENSION
PUSHJ P,PRSIX ;PRINT IT
PUSHJ P,PRLBKT ;PRINT LEFT BRACKET
HLRZ T1,PTHBLK ;GET PROJECT NUMBER
PUSHJ P,PROCT ;PRINT IT
PUSHJ P,PRCOMA ;PRINT COMMA
HRRZ T1,PTHBLK ;GET PROGRAMMER NUMBER
PUSHJ P,PROCT ;PRINT IT
MOVEI T4,1 ;OFFSET INTO PTHBLK OF FIRST SFD
PRFIL1: SKIPN T1,PTHBLK(T4) ;NEXT SFD NON-NULL?
PJRST PRRBKT ;NO, PRINT RIGHT BRACKET AND RETURN
PUSHJ P,PRCOMA ;PRINT COMMA
PUSHJ P,PRSIX ;PRINT SFD NAME
AOJA T4,PRFIL1 ;LOOP FOR NEXT SFD
PRFIL2: MOVE T1,FOP+.FODEV ;GET DEVICE
PUSHJ P,PRSIX ;PRINT IT
PUSHJ P,PRCOL ;PRINT A COLON
MOVE T1,LEB+.RBNAM ;GET THE FILENAME
PUSHJ P,PRSIX ;PRINT IT
PUSHJ P,PRDOT ;PRINT A DOT
HLLZ T1,LEB+.RBEXT ;GET EXTENSION
PJRST PRSIX ;PRINT IT AND RETURN
SUBTTL LOWEST LEVEL CTY INPUT/OUTPUT ROUTINES
;ROUTINE TO TYPE ONE CHARACTER ON THE CTY.
;CALL:
; T3/CHARACTER TO TYPE
; PUSHJ P,TYO
;RETURN+1 ALWAYS
;DESTROYS T3.
TYO: SKIPN USRFLG ;USER MODE?
JRST TYO0 ;EXEC MODE
OUTCHR T3 ;TYPE ON THE TERMINAL
POPJ P, ;RETURN
TYO0:
IFN FTKL10,<
MOVSI T3,DT.MTO(T3) ;GET CHAR IN LOW ORDER 8 BITS, COMMAND IN NEXT FOUR
HRRI T3,DTEMTD ;PUT WORD OFFSET IN RH
DODTE: SETZM EPT(T3) ;CLEAR DONE FLAG
HLRZM T3,EPT+DTECMD ;PUT INTO COMMAND LOCATION
CONO DTE0,TO11DB ;RING DOORBELL
SKIPN EPT(T3) ;WAIT TILL MONITOR OUTPUT DONE
JRST .-1 ;LOOP
POPJ P,0 ;DONE.
>;END IFN FTKL10
IFN FTKS10,<
SKIPE .VPAG0+CTYOWD ;CAN WE SEND NEXT CHAR?
JRST .-1 ;NOT YET
IORI T3,CTYOVL ;SIGNAL VALID
MOVEM T3,.VPAG0+CTYOWD ;PUT IT UP FOR THE 8080 TO FIND IT
CONO APR,SP.SSF!SP.IFE ;WAKE THE 8080
POPJ P,0 ;DONE
>;END IFN FTKS10
;ROUTINE TO READ ONE CHARACTER FROM THE CTY.
;CALL: PUSHJ P,TYI
;RETURN+1 IF THE OPERATOR DID NOT ANSWER OR SCHED WAS 400
;RETURN+2 WITH CHARACTER IN T3
;DESTROYS T1
TYI: TLNE S,(FL.NOP) ;NO OPERATOR IN ATTENDANCE?
TDZA T1,T1 ;YES, USE SHORT TIMEOUT COUNT
MOVSI T1,WATTIM ;ELSE USE 30 SECONDS OR SO
SKIPN USRFLG ;USER MODE?
JRST TYI0 ;NO
INCHWL T3 ;READ A CHARACTER IN LINE MODE
JRST TYI2 ;AND ENTER COMMON CODE
TYI0:
IFN FTKL10,<SKIPN EPT+DTEMTI> ;INPUT READY?
IFN FTKS10,<SKIPN .VPAG0+CTYIWD>;INPUT READY?
SOJGE T1,.-1 ;NO, LOOP BUT NOT TOO LONG
JUMPGE T1,TYI1 ;GO IF DIDN'T TIME OUT
TLNE S,(FL.DEF) ;WANT TO DO DEFAULTING?
JRST TYI ;NO, WAIT FOR TYPEIN
TLO S,(FL.NOP) ;SET NO OPERATOR FLAG
POPJ P, ;AND GIVE NON-SKIP RETURN
TYI1:
IFN FTKL10,<
MOVE T3,EPT+DTEF11 ;GET CHARACTER
SETZM EPT+DTEMTI ;FLAG WE GOT IT
>;END IFN FTKL10
IFN FTKS10,<
MOVEI T3,0 ;SET TO GET CHAR AND CLEAR WORD
EXCH T3,.VPAG0+CTYIWD ;GET CHARACTER AND CLEAR
>;END IFN FTKS10
TYI2: ANDI T3,177 ;KEEP ONLY 7 BITS
JUMPE T3,TYI ;IGNORE NULLS
CAIN T3,.CHCNC ;CONTROL-C?
JRST RICC ;YES
CAIN T3,.CHCND ;CONTROL-D?
JRST RICD ;YES
MOVEI T1,1 ;GET A BIT TO SHIFT
LSH T1,(T3) ;SHIFT BY VALUE OF CHARACTER
TDNE T1,BRKTAB ;BREAK CHARACTER?
MOVEI T3,.CHCRT ;YES, CONVERT TO CR
JRST CPOPJ1 ;GIVE SKIP RETURN
; HERE TO CHECK FOR INPUT WITHOUT BLOCKING
LISTEN: PUSH P,S ;SAVE S
PUSH P,T1 ;PRESERVE T1
PUSH P,T3 ;PRESERVE T3
MOVSI S,(FL.NOP) ;NO DEFAULTING, NO OPERATOR
MOVEI T1,0 ;SHORT TIMEOUT
PUSHJ P,TYI0 ;TRY TO GET A CHARACTER
JFCL ;OK IF NONE THERE
POP P,T3 ;RESTORE T3
POP P,T1 ;RESTORE T1
POP P,S ;RESTORE S
POPJ P, ;RETURN
; HERE ON CONTROL-C
RICC: MOVEI T1,[ASCIZ/
^C
/]
PUSHJ P,PRMSG ;PRINT MESSAGE
JRST RESTAR ;AND RESTART BOOT
; HERE ON A CONTROL-D
RICD: MOVEM 0,CDSAV ;SAVE AC 0
MOVE 0,[1,,CDSAV+1] ;SET UP BLT
BLT 0,CDSAV+17 ;SAVE ACS 1-17
MOVEI T1,0 ;PREPARE TO CLEAR
EXCH T1,.VPAG0+.JBEDV ;GET MONITOR'S EDV POINTER
MOVEM T1,CD112 ;SAVE SINCE MONITOR MAY AHVE EDDT LOADED TOO
DMOVE T1,.VPAG0+.JBSYM ;GET ADDITIONAL MONITOR WORDS
DMOVEM T1,CD116 ;SAVE THEM
DMOVE T1,BTSVEC+.BTSYM ;GET SYMBOL TABLE POINTERS
DMOVEM T1,.VPAG0+.JBSYM ;SET UP SYMBOL TABLE FOR EDDT
DMOVE T1,CDSAV+T1 ;RESTORE T1 AND T2
XCT BTSVEC+.BTBPT ;ENTER DDT IF DEBUGGING
MOVE T1,CD112 ;GET MONITOR'S EDV POINTER
MOVEM T1,.VPAG0+.JBEDV ;RESTORE IT
DMOVE T1,CD116 ;GET SAVED LOCATIONS
DMOVEM T1,.VPAG0+.JBSYM ;RESTORE THEM
MOVSI 17,CDSAV ;SET UP BLT
BLT 17,17 ;RESTORE ACS 0-17
SKIPN CDFLG ;ENTERED DDT FROM STARTUP?
JRST TYI0 ;NO--GO BACK AND TRY FOR MORE INPUT
SETZM CDFLG ;CLEAR INCASE RESTARTED
POPJ P, ;RETURN
BRKTAB: 1_.CHBEL!1_.CHTAB!1_.CHLFD!1_.CHVTB!1_.CHFFD!1_.CHCNZ!1_.CHESC!1_" "
SUBTTL DISK SUPPORT SUBROUTINES
IFE FTKS10,<
;ROUTINE TO READ A MASSBUS REGISTER AND RETURN THE VALUE.
;CALL WITH:
; T1/DATAO WORD
; PUSHJ P,REDREG
;RETURN+1 ALWAYS WITH FULL 36 BIT DATA IN T1
REDREG: XCT DODATO ;TELL THE DEVICE WHICH REGISTER
STALL ;WAIT AWHILE
XCT DODATI ;READ THE DATA
POPJ P, ;RETURN
>;END IFE FTKS10
;ROUTINE TO READ AND CHECK THE DRIVE TYPE REGISTER FOR A DEVICE AGAINST
;THOSE DRIVE TYPES THAT WE KNOW ABOUT.
;CALL:
; T1/DATAO WORD TO READ DRIVE TYPE REGISTER
; PUSHJ P,DRVTYP
;RETURN+1 IF NO MATCH
;RETURN+2 IF MATCH WITH DRVBPC, DRVBPT SETUP
DRVTYP:
IFE FTKS10,<
PUSHJ P,REDREG ;READ THE REGISTER
>
IFN FTKS10,<
TRNN T1,SI.DSK ;THIS A DISK UNIT?
POPJ P, ;NO
>
ANDI T1,777 ;KEEP ONLY 9 BITS
MOVSI T2,-DRTTBL ;GET AOBJN POINTER TO DRIVE TYPE TABLE
DRVTY1: CAME T1,DRTTAB(T2) ;MATCH WITH THIS ONE?
AOBJN T2,DRVTY1 ;NO, LOOP
JUMPGE T2,CPOPJ ;FAIL IF NO MATCH
MOVE T1,BPCTAB(T2) ;GET BLOCKS/CYLINDER
MOVE T2,BPTTAB(T2) ; AND BLOCKS/TRACK
DMOVEM T1,DRVBPC ;STORE VALUES
JRST CPOPJ1 ;GIVE SKIP RETURN
;TABLES DEFINING THE DRIVE TYPES OF THE DRIVES WE KNOW ABOUT AND
;THE CORRESPONDING VALUES OF BLOCKS/CYLINDER AND BLOCKS/TRACK FOR
;EACH DRIVE. THESE ARE PARALLEL TABLES AND THUS ARE ORDER SENSITIVE.
;
;TABLE GIVING THE DRIVE TYPES THAT WE KNOW ABOUT.
DRTTAB: EXP 20 ;RP04
EXP 22 ;RP06
EXP 24 ;RM03
EXP 42 ;RP07
DRTTBL==.-DRTTAB
;TABLE GIVING THE NUMBER OF BLOCKS/CYLINDER FOR EACH DRIVE.
BPCTAB: DEC 380 ;RP04
DEC 380 ;RP06
DEC 150 ;RM03
DEC 1376 ;RP07
;TABLE GIVING THE NUMBER OF BLOCKS/TRACK FOR EACH DRIVE.
BPTTAB: DEC 20 ;RP04
DEC 20 ;RP04
DEC 30 ;RM03
DEC 43 ;RP07
SUBTTL BYTE POINTERS INTO DATA STRUCTURES
DESRBU==^D4 ;SIZE OF UNIT NUMBER FIELD IN RIBXRA
DENRBU==^D12 ;BIT POSITION OF UNIT NUMBER FIELD IN RIBXRA
DESRBA==^D23 ;SIZE OF CLUSTER ADDRESS FIELD IN RIBXRA
DENRBA==^D35 ;BIT POSITION OF CLUSTER ADDRESS FIELD IN RIBXRA
DEYRBU: POINT DESRBU,RIB+RIBXRA,DENRBU
;UNIT ON WHICH NEXT EXTENDED RIB EXISTS
DEYRBA: POINT DESRBA,RIB+RIBXRA,DENRBA
;CLUSTER ADDRESS ON UNIT ON WHICH NEXT EXTENDED
;RIB EXISTS
SUBTTL TABLES DRIVING DEVICE DEPENDENT I/O
;TABLE GIVING DEVICE CODES OF CONTROLLERS THAT WE CAN TALK TO.
;TABLE IS ORDERED (HOPEFULLY) SO THAT WE WILL FIND THE FILE IN THE
;LEAST DISK ACCESSES.
;FORMAT IS:
; XWD <OFFSET INTO TYPE TABLES>,<DEVICE CODE>_-2
DEFINE DCODE(CODE,OFS,FTS),<
IFN FTS,<
XWD OFS,CODE_-2
>
>
DVCTAB: DCODE (540,R20OFS,FTKL10) ;RH20 0 ON KL
DCODE (544,R20OFS,FTKL10) ;RH20 1 ON KL
DCODE (550,R20OFS,FTKL10) ;RH20 2 ON KL
DCODE (554,R20OFS,FTKL10) ;RH20 3 ON KL
DCODE (270,R10OFS,FTKL10) ;RH10 0 ON KL
DCODE (274,R10OFS,FTKL10) ;RH10 1 ON KL
DCODE (560,R20OFS,FTKL10) ;RH20 4 ON KL
DCODE (564,R20OFS,FTKL10) ;RH20 5 ON KL
DCODE (570,R20OFS,FTKL10) ;RH20 6 ON KL
DCODE (574,R20OFS,FTKL10) ;RH20 7 ON KL
DCODE (360,R10OFS,FTKL10) ;RH10 2 ON KL
DCODE (364,R10OFS,FTKL10) ;RH10 3 ON KL
DCODE (<1_2>,R11OFS,FTKS10) ;RH11 UBA 1 ON KS
DVCTBL==.-DVCTAB
;TABLE OF I/O INSTRUCTIONS. DEVICE CODES FILLED IN BEFORE USE.
IOTTAB:
IFN FTKL10,<
DODATO: DATAO 0,T1
DODATI: DATAI 0,T1
DOCONI: CONI 0,T1
DOCONO: CONO 0,(T1)
DOCNSO: CONSO 0,(T1)
>;END IFN FTKL10
IOTTBL==.-IOTTAB
;THE FOLLOWING TABLES GIVE THE DISPATCH ADDRESSES FOR THE DISK CONTROLLER
;DEPENDENT READ AND WRITE ROUTINES. ALL ARE CALLED WITH THE FOLLOWING
;AC'S SETUP:
;
; J = INDEX INTO DEVICE CODE TABLE
; U = PHYSICAL UNIT NUMBER
; W = OFFSET INTO TABLES BELOW
; R = PHYSICAL MEMORY ADDRESS OF START OF TRANSFER
; F = BLOCK ON UNIT OF FIRST BLOCK TO TRANSFER
; M = NUMBER OF CONTIGUOUS BLOCKS TO TRANSFER
;
;ALL CONTROLLER DEPENDENT ROUTINES MUST PRESERVE F AND R WITH
;A CALL TO SAVFR.
;
;**** THE RH10 AND RH20 ENTRIES IN THE FOLLOWING TABLES MUST BE
;**** THE FIRST AND SECOND ENTRIES IN THE TABLES AND MUST REMAIN
;**** IN THE SAME RELATIVE ORDER.
DEFINE DADDR(ADDR,OFS,FTS),<
IFN FTS,<
OFS==.-REDTAB
EXP ADDR
>
>
;TABLE OF ADDRESSES OF CONTROLLER READ ROUTINES INDEXED BY CONTROLLER
;TYPE.
REDTAB: DADDR (R12RED,R10OFS,FTKL10)
DADDR (R12RED,R20OFS,FTKL10)
DADDR (R11RED,R11OFS,FTKS10)
DEFINE DADDR (ADDR,FTS),<
IFN FTS,<
EXP ADDR
>
>
;TABLE OF ADDRESSES OF CONTROLLER WRITE ROUTINES INDEXED BY CONTROLLER
;TYPE.
WRTTAB: DADDR (R12WRT,FTKL10)
DADDR (R12WRT,FTKL10)
DADDR (R11WRT,FTKS10)
SUBTTL RH10/RH20 DEVICE DEPENDENT ROUTINES
IFN FTKL10,<
;ROUTINES TO READ FROM/WRITE TO A DRIVE ON AN RH10/RH20. CALL WITH THE
;STANDARD AC'S SETUP. TRANSLATES THE DEVICE INDEPENDENT TRANSFER
;REQUEST INTO AS MANY TRANSFERS AS NECESSARY TO MAKE THE RH10/RH20 HAPPY.
;CALL: PUSHJ P,R12RED -OR- PUSHJ P,R12WRT
;RETURN+1 IF I/O ERRORS
;RETURN+2 IF TRANSFER WAS SUCCESSFUL
R12WRT: TLOA S,(FL.IO) ;SET FLAG FOR OUTPUT
R12RED: TLZ S,(FL.IO) ;CLEAR FLAG FOR INPUT
PUSHJ P,SAVFR ;SAVE F AND R
PUSHJ P,R12INI ;INITIALIZE THE RH10/RH20
POPJ P, ;FAILED
R12XFR: JUMPLE M,CPOPJ1 ;DONE WHEN TRANSFERED ALL BLOCKS
TLNE S,(FL.IO) ;WRITING?
CAILE F,LB2HOM+LBOBAT ;YES, ON HOM OR BAT BLOCKS?
CAIA ;NO
HALT . ;YES, DON'T MAKE THINGS WORSE
PUSHJ P,R12CLR ;MAKE SURE THE RH10/RH20 IS CLEARED
PUSHJ P,R12SET ;MAKE IOWDS, TELL DRIVE WHERE TO START
IFN FTKL10,<
JUMPE W,R10XFR ;DIFFERENT IF RH10
MOVSI T1,<(DO.2ST)>(U) ;TALK TO STCR AND SPECIFIED DRIVE
DPB T4,[POINT 10,T1,29] ;STORE -VE BLOCKCOUNT
JRST R12XF1 ;JOIN COMMON CODE
>
R10XFR: MOVSI T1,<(DO.1CR)>(U) ;TALK TO COMMAND REGISTER AND SPECIFIED DRIVE
HRRI T1,<BOOTWD_6> ;SET INITIAL CONTROL WORD ADDRESS
R12XF1: TLNN S,(FL.IO) ;DOING OUTPUT?
TROA T1,DO.XRD ;NO, SET READ FUNCTION CODE
TRO T1,DO.XWT ;YES, SET WRITE FUNCTION CODE
XCT DODATO ;START THE TRANSFER
PUSHJ P,R12WAT ;WAIT FOR IT TO COMPLETE
PUSHJ P,R12CHK ;CHECK FOR ERRORS
POPJ P, ;GIVE NON-SKIP RETURN IF ERRORS OR TIMED OUT
JRST R12XFR ;DO MORE IF ANY BLOCKS LEFT
;ROUTINE TO SETUP THE CHANNEL COMMAND LIST FOR THIS TRANSFER AND
;TELL THE DRIVE WHERE TO START THE TRANSFER. CALL WITH THE STANDARD
;AC'S SETUP.
;CALL: PUSHJ P,R12SET
;RETURN+1 ALWAYS
;RETURNS WITH M, R, AND F UPDATED TO REFLECT THIS TRANSFER AND
; T4/NEGATIVE BLOCKCOUNT FOR THIS TRANSFER
R12SET: MOVEI T4,0 ;INITIALIZE BLOCK COUNT TO 0
IFN FTKL10,<
JUMPE W,R12SE2 ;NO LOGOUT AREA FOR RH10'S
HRRZ T1,DVCTAB(J) ;GET DEVICE CODE FOR THIS DEVICE
LSH T1,2 ;TIMES 2
SUBI T1,540 ;COMPUTE OFFSET IN EPT OF LOGOUT AREA
MOVE T2,EPTADR ;GET PHYSICAL ADDRESS OF THE EPT
ADDI T2,R2IOWD-EPT ;ADD OFFSET TO FIRST IOWD
TLO T2,(RH2JMP) ;MAKE IT A JUMP WORD
MOVEM T2,EPT(T1) ;STORE JUMP WORD IN LOGOUT AREA
MOVSI T1,-<R2IOWL-1> ;MAKE AOBJN POINTER TO IOWD LIST
R12SE1: JUMPLE M,R12SE5 ;STOP WHEN DONE ENTIRE TRANSFER
>
R12SE2: MOVEI T2,(M) ;ASSUME LESS THAN MAX
CAMLE M,[R1BCNT
R2BCNT](W) ;ARE WE CORRECT?
MOVE T2,[R1BCNT
R2BCNT](W) ;NO, MAKE IT THE MAX POSSIBLE IN 1 IOWD
SUBI M,(T2) ;DECREMENT BLOCKS REMAINING
SUBI T4,(T2) ;AND BLOCKS DONE
LSH T2,B2WLSH ;CONVERT TO WORDS
IFN FTKL10,<
JUMPE W,R12SE3 ;GO IF RH10
LSH T2,^D18+4 ;POSITION IN IOWD
TLO T2,(RH2TRA) ;MAKE THE OPCODE A TRANSFER
IOR T2,R ;STORE PHYSICAL ADDRESS
MOVEM T2,R2IOWD(T1) ;STORE IN CHANNEL COMMAND LIST
ADDI R,R2WCNT ;INCREMENT CORE ADDRESS FOR NEXT TIME
JRST R12SE4 ;JOIN COMMON CODE
>
R12SE3: MOVNS T2 ;RH10'S WANT A NEGATIVE WORDCOUNT
LSH T2,^D18 ;MOVE TO LH
XCT DOCONI ;GET CONI FOR DRIVE
TLNE T1,(CI.122) ;SKIP IF 18 BIT DF10
LSH T2,4 ;DF10C'S ONLY HAVE 14 BITS OF WORDCOUNT
IOR T2,R ;STORE PHYSICAL ADDRESS
SUBI T2,1 ;AND ADDRESS-1
MOVEM T2,.VPAG0+BOOTWD ;STORE IOWD IN LOW CORE
SETZM .VPAG0+BOOTWD+1 ;INSURE IOWD TERMINATION
ADDI R,R1WCNT ;INCREMENT CORE ADDRESS FOR NEXT TIME
IFN FTKL10,<
JRST R12SE6 ;DO ONLY ONE IOWD FOR AN RH10
R12SE4: AOBJN T1,R12SE1 ;DO AS MANY AS POSSIBLE
R12SE5: SETZM R2IOWD(T1) ;STORE HALT IOWD TO TERMINATE LIST
>
R12SE6: MOVE T1,F ;COPY BLOCK ADDRESS
SUB F,T4 ;UPDATE FOR AMOUNT OF THIS TRANSFER
IDIV T1,DRVBPC ;T1=CYLINDER, T2=REMAINDER
HRLI T1,<(DO.XDC)>(U) ;STORE IN DESIRED CYLINDER REGISTER
XCT DODATO ;TELL THE DRIVE
IDIV T2,DRVBPT ;T2=TRACK, T3=SECTOR
DPB T2,[POINT 8,T3,27] ;POSITION CORRECTLY
MOVSI T1,<(DO.XDS)>(U) ;TALK TO THE BLOCK ADDRESS REGISTER
HRRI T1,(T3) ;STORE ADDRESS
XCT DODATO ;TELL THE DRIVE
POPJ P, ;RETURN
;ROUTINE TO INITIALIZE THE RH10/RH20 FOR A TRANSFER. ACTS AS A COROUTINE
;IF NO ERRORS ARE DETECTED SO THAT THE CONI STATE MAY BE RESTORED
;WHEN THE CALLER RETURNS
;CALL: PUSHJ P,R12INI
;RETURN+1 IF INITIALIZATION FAILED
;RETURN+2 IF SUCCESSFUL
R12INI: XCT DOCONI ;GET CONI IN T1
PUSH P,T1 ;SAVE IT FOR LATER
MOVEI T1,1 ;WRITE THE PIA
XCT DOCONO
XCT DOCONI ;AND READ IT BACK
JUMPLE T1,TPOPJ ;0 - NO RH10/20, SIGN BIT - KLIPA/KLNI
MOVE T1,[DO.1IA ;READ INTERRUPT ADDRESS REGISTER
DO.2IV](W) ; OR INTERRUPT VECTOR INDEX REGISTER
PUSHJ P,REDREG
PUSH P,T1 ;SALT IT AWAY FOR LATER
PUSHJ P,R12CLR ;BLAST THE RH10/RH20 INTO A KNOWN STATE
MOVSI T1,<(DO.XDT)>(U) ;NEED DRIVE TYPE REGISTER FOR THIS DRIVE
PUSHJ P,DRVTYP ;READ AND CHECK IT
JRST R12IN1 ;NO MATCH
MOVSI T1,<(DO.XCR)>(U) ;POINT TO DRIVE CONTROL REGISTER
HRRI T1,DO.XCL ;FUNCTION IS DRIVE CLEAR
XCT DODATO ;CLEAR THE DRIVE
HRRI T1,DO.XRP ;FOLLOWED BY A READIN
XCT DODATO ; PRESET
MOVSI T1,<(DO.XSR)>(U) ;SETUP TO READ STATUS REGISTER
PUSHJ P,REDREG ;DO SO
ANDI T1,DI.XSM ;MASK, IGNORING WRITE LOCK, PGM
CAIE T1,DI.XSB ;IS IT OK?
JRST R12IN1 ;NO
MOVE T1,-1(P) ;GET THE CONI BITS
EXCH T1,-2(P) ;SWAP WITH CALLER'S PC
POP P,-1(P) ;MOVE DATAI BITS DOWN ONE ON STACK
PUSHJ P,1(T1) ;CALL THE CALLER
CAIA ;PROPAGATE NON-SKIP
AOS -2(P) ;SET FOR SKIP RETURN
R12IN1: PUSHJ P,R12CLR ;BLAST THE RH10/RH20 AGAIN
POP P,T1 ;RESTORE THE IA/IVIR CONTENTS
TLO T1,(DO.LDR) ;SET LOAD REGISTER
XCT DODATO ;RELOAD THE IA/IVIR
POP P,T1 ;RESTORE THE CONI BITS
IOR T1,[CO.1AE
CO.2ME](W) ;FORCE CORRECT BITS FOR CONTROLLER TYPE
AND T1,[CO.1RB
CO.2RB](W) ;BUT KEEP ONLY THE IMPORTANT ONES
XCT DOCONO ;RESTORE THE PIA, AIE, ETC.
POPJ P, ;RETURN
;ROUTINE TO CHECK THE RH10/RH20 FOR ERRORS IN THE LAST TRANSFER.
;CALL: PUSHJ P,R12CHK
;RETURN+1 IF ERRORS DETECTED
;RETURN+2 IF NO ERRORS
R12CHK: MOVSI T1,<(DO.XSR)>(U) ;SET TO READ STATUS REGISTER
PUSHJ P,REDREG ;DO SO
TRNE T1,DI.XCE ;COMPOSITE ERROR?
POPJ P, ;YES, GIVE ERROR RETURN
MOVE T1,[CI.1ER
CI.2ER](W) ;GET CONI ERROR BITS FOR CONTROLLER
XCT DOCNSO ;ANY SET?
JRST CPOPJ1 ;NO, GIVE SKIP RETURN
POPJ P, ;YES
;ROUTINE TO WAIT FOR THE RH10/RH20 TO FINISH A TRANSFER.
;CALL: PUSHJ P,R12WAT
;RETURN+1 IF SUCCESSFUL
;RETURN+2 IF TIMED OUT
R12WAT: MOVSI T2,10 ;LOOP COUNT = ABOUT 7 SECONDS
MOVE T1,[CI.1RA!CI.XDN
CI.2RA!CI.XDN](W) ;WAIT FOR DONE OR RAE TO COME UP
XCT DOCNSO ;IN THE CONI
SOJG T2,.-1 ;HASN'T YET, WAIT FOR IT
JUMPLE T2,CPOPJ1 ;GIVE SKIP RETURN IF TIMED OUT
POPJ P, ;RETURN
;ROUTINE TO FORCE THE RH10/RH20 INTO A KNOWN STATE FOR A TRANSFER.
;CALL: PUSHJ P,R12CLR
;RETURN+1 ALWAYS
R12CLR: MOVEI T1,CO.XMI ;DO A
XCT DOCONO ; MASSBUS INIT
MOVEI T1,CO.XSX ;THEN A
XCT DOCONO ; STOP TRANSFER
MOVEI T1,CO.XDN ;THEN A
XCT DOCONO ; CLEAR DONE
MOVEI T1,CO.2ME ;AND FINALLY A
XCT DOCONO ; MASSBUS ENABLE
POPJ P,
SUBTTL INTERNAL CHANNEL DEVICE DEPENDENT ROUTINERS
;ROUTINE TO FORCIBLY HALT ALL INTERNAL CHANNEL DEVICES.
;CALL:
; PUSHJ P,ZAPICH
;RETURN+1 ALWAYS
ZAPICH: PUSH P,P1 ;SAVE AN AC
MOVEI P1,FSTICD/4 ;GET FIRST INTERNAL CHANNEL DEVICE CODE
ZAPIC1: MOVE T1,P1 ;GET DEVICE CODE IN T1
PUSHJ P,SETIOC ;SET UP I/O INSTRUCTIONS
XCT DOCONI ;READ CONI
JUMPE T1,ZAPIC3 ;JUMP IF NON-EXISTANT
JUMPL T1,ZAPIC2 ;JUMP IF IPA DEVICE (CI20 OR NIA20)
PUSHJ P,R12CLR ;CLEAR THE RH20
JRST ZAPIC3 ;CONTINUE
ZAPIC2: MOVEI T1,CO.CPT ;BIT TO CLEAR THE PORT
XCT DOCONO ;HALT THE MICROPROCESSOR
ZAPIC3: CAIGE P1,LSTICD/4 ;DONE THEM ALL?
AOJA P1,ZAPIC1 ;NO, LOOP FOR OTHERS
POP P,P1 ;RESTORE THE AC
POPJ P, ;RETURN
>;END IFN FTKL10
SUBTTL RH11 DEVICE DEPENDENT ROUTINES
IFN FTKS10,<
;ROUTINES TO READ FROM/WRITE TO A DRIVE ON AN RH11. CALL WITH THE
;STANDARD AC'S SETUP. TRANSLATES DEVICE INDEPENDENT TRANSFER REQUEST
;TO AS MANY TRANSFERS AS NECESSARY TO MAKE THE RH11 HAPPY.
;CALL: PUSHJ P,R11RED -OR- PUSHJ P,R11WRT
;RETURN+1 IF I/O ERRORS
;RETURN+2 IF TRANSFER WAS SUCCESSFUL
R11WRT: TLOA S,(FL.IO) ;SET FLAG FOR OUTPUT
R11RED: TLZ S,(FL.IO) ;CLEAR FLAG FOR INPUT
PUSHJ P,SAVFR ;SAVE F AND R
HRLZ T4,DVCTAB(J) ;SET T4=UBA,,0
PUSHJ P,R11INI ;INITIALIZE THE RH11
POPJ P, ;FAILED
R11XFR: JUMPLE M,CPOPJ1 ;DONE WHEN TRANSFERED ALL BLOCKS
TLNE S,(FL.IO) ;WRITING?
CAILE F,LB2HOM+LBOBAT ;YES, ON HOM OR BAT BLOCKS?
CAIA ;NO
HALT . ;YES, DON'T MAKE THINGS WORSE
PUSHJ P,R11CLR ;CLEAR THE RH11
WRIO U,SO.CS2(T4) ;SELECT DRIVE
PUSH P,T4 ;SAVE T4
PUSHJ P,R11SET ;SET UBA MAP SLOTS, DRIVE LBN
POP P,T4 ;RESTORE T4
MOVEI T1,SO.WRT ;ASSUME WRITING
TLNN S,(FL.IO) ;ARE WE CORRECT?
MOVEI T1,SO.RED ;NO, SET READING
WRIO T1,SO.CS1(T4) ;START THE TRANSFER
MOVSI T2,2 ;LOOP COUNT
R11XF1: RDIO T1,SO.CS1(T4) ;READ STATUS REGISTER
TRNN T1,SI.RDY ;READY COME UP?
SOJG T2,R11XF1 ;NO, LOOP
JUMPLE T2,CPOPJ ;ERROR RETURN IF TIMED OUT
TRNE T1,SI.S1E ;ERRORS?
POPJ P, ;YES
JRST R11XFR ;DO MORE IF ANY BLOCKS LEFT
;ROUTINE TO SETUP THE UBA MAPPING REGISTERS, AND THE DRIVE REGISTERS
;FOR THIS TRANSFER. CALL WITH THE STANDARD AC'S SETUP.
;CALL:
; T4/UBA,,0
; PUSHJ P,R11SET
;RETURN+1 ALWAYS
;RETURNS WITH M, R, AND F UPDATED TO REFLECT THIS TRANSFER.
;DESTROYS T4
R11SET: MOVEI T1,(R) ;GET ADDRESS OF FIRST WORD TO TRANSFER
ANDI T1,PAGSIZ-1 ;ISOLATE OFFSET OF FIRST WORD IN PAGE
LSH T1,2 ;MAKE IT A BYTE OFFSET
WRIO T1,SO.BA(T4) ;SET THE BUS ADDRESS REGISTER
MOVE T1,F ;COPY LBN OF FIRST BLOCK TO TRANSFER
IDIV T1,DRVBPC ;T1=CYLINDER, T2=BLOCK IN CYLINDER
WRIO T1,SO.DC(T4) ;SET DESIRED CYLINDER REGISTER
IDIV T2,DRVBPT ;T2=TRACK, T3=BLOCK IN TRACK
DPB T2,[POINT 8,T3,27] ;POSITION TRACK NUMBER
WRIO T3,SO.DA(T4) ;TELL DRIVE
MOVEI T1,(M) ;ASSUME WE CAN DO ALL OF TRANSFER
CAILE T1,RSBCNT ;LARGER THAN MAX?
MOVEI T1,RSBCNT ;YES, USE MAX
SUBI M,(T1) ;ADJUST M FOR NEXT TIME
ADDI F,(T1) ;ADVANCE TO FIRST BLOCK OF NEXT TRANSFER
MOVE T2,R ;COPY CORE ADDRESS OF FIRST WORD
LSH T1,B2WLSH ;COMPUTE WORD COUNT
ADD R,T1 ;ADVANCE CORE ADDRESS FOR NEXT TIME
LSH T1,1 ;COMPUTE PDP11 WORD COUNT
MOVNS T1 ;MAKE IT NEGATIVE
WRIO T1,SO.WC(T4) ;SET WORD COUNT REGISTER
LSH T2,W2PLSH ;COMPUTE PAGE NUMBER OF 1ST PAGE
MOVE T1,R ;GET ADDRESS OF FIRST WORD OF NEXT TRANSFER
SUBI T1,1 ;MAKE IT LAST ADDRESS OF THIS TRANSFER
LSH T1,W2PLSH ;COMPUTE PAGE NUMBER
SUBI T1,-1(T2) ;COMPUTE NUMBER OF PAGES TO MAP
MOVNS T1 ;MAKE IT NEGATIVE
HRL T2,T1 ;AND MAKE AN AOBJN POINTER
TRO T2,SO.VFT ;SET VALID AND FAST TRANSFER
R11SE1: WRIO T2,SO.UPR(T4) ;MAP ONE PAGE
ADDI T4,1 ;INCREMENT UBA MAP ADDRESS
AOBJN T2,R11SE1 ;LOOP FOR ALL
POPJ P, ;RETURN
;ROUTINE TO INITIALIZE THE RH11 FOR A TRANSFER. ACTS AS A COROUTINE
;IF NO ERRORS ARE DETECTED SO THAT THE UBA STATUS REGISTER AND
;CONTROL STATUS REGISTER 1 MAY BE RESTORED WHEN THE CALLER RETURNS.
;CALL:
; T4/UBA,,0
; PUSHJ P,R11INI
;RETURN+1 IF INITIALIZATION FAILED
;RETURN+2 IF SUCCESSFUL
R11INI: RDIO T1,SO.USR(T4) ;READ UBA STATUS REGISTER
TRNE T1,SI.UER ;ANY ERRORS?
POPJ P, ;YES, ERROR
RDIO T2,SO.CS1(T4) ;READ CS REGISTER 1
HRL T1,T2 ;T1=CSR 1,,UBA SR
PUSH P,T1 ;SAVE FOR RESTORE
PUSHJ P,R11CLR ;CLEAR THE RH11
WRIO U,SO.CS2(T4) ;SELECT DRIVE
RDIO T1,SI.DT(T4) ;READ DRIVE TYPE REGISTER
PUSHJ P,DRVTYP ;CHECK IT
JRST R11IN1 ;FAILED
MOVEI T1,SO.DCL ;GET DRIVE CLEAR FUNCTION
WRIO T1,SO.CS1(T4) ;DO IT
MOVEI T1,SO.RIP ;GET READIN PRESET FUNCTION
WRIO T1,SO.CS1(T4) ;DO IT
RDIO T1,SO.DS(T4) ;READ DRIVE STATUS REGISTER
ANDI T1,SO.DSM ;MASK, IGNORING WRITE LOCK, PGM
CAIE T1,SO.DSB ;IS IT OK?
JRST R11IN1 ;NO
MOVE T1,-1(P) ;GET CALLERS RETURN ADDRESS
POP P,-1(P) ;MOVE STATE BITS DOWN ONE ON THE STACK
PUSHJ P,1(T1) ;CALL THE CALLER
CAIA ;PROPAGATE NON-SKIP
AOS -1(P) ;GIVE SKIP RETURN
R11IN1: PUSHJ P,R11CLR ;CLEAR THE RH11 AGAIN
POP P,T1 ;GET BACK CS1,,UBA SR
AND T1,[SO.RBT] ;KEEP ONLY IMPORTANT BITS
WRIO T1,SO.USR(T4) ;RESTORE UBA STATUS REGISTER
MOVSS T1 ;PUT CS1 BITS IN RH
WRIO T1,SO.CS1(T4) ;RESTORE CS1 BITS
POPJ P, ;RETURN
;ROUTINE TO FORCE THE RH11 INTO A KNOWN STATE.
;CALL:
; T4/UBA,,0
; PUSHJ P,R11CLR
;RETURN+1 ALWAYS
R11CLR: MOVEI T1,SO.UBI ;UBA INIT
WRIO T1,SO.USR(T4) ;CLEAR THE UBA/DRIVES
RDIO T1,SO.ASR(T4) ;READ ATTENTION SUMMARY
WRIO T1,SO.ASR(T4) ;CLEAR ANYBODY WHO'S STILL ON
;CAN HAPPEN IF DUAL PORTED
POPJ P, ;RETURN
>;END IFN FTKS10
SUBTTL LITERALS
BTSLIT: LIT
SUBTTL MAGTAPE-SPECIFIC CODE
;MAGTAPE-SPECIFIC CODE RESIDES HERE (AFTER LITERALS) SO IT CAN BE THROWN
;AWAY AFTER LOADING A MONITOR.
IFN FTTAPE,<
TAPBEG:! ;START OF MAGTAPE-SPECIFIC CODE
;TAPE ACTION COMMAND PROCESSING (GET HERE FROM RLDMO2)
TAPACT: TRNE S,FR.SKP ;/SKIP SEEN?
JRST TAPSKP ;YES
TRNE S,FR.REW ;/REWIND SEEN?
JRST TAPREW ;YES
;PROCESS ANY OTHER TAPE ACTION BITS
JRST RESTAR ;PARSE NEXT COMMAND
TAPSKP: PUSHJ P,SKPEOF ;SKIP TO END OF FILE
JRST RESTAR ;PARSE NEXT COMMAND
TAPREW: PUSHJ P,REWIND ;REWIND THE TAPE
PUSHJ P,CHKREW ;WAIT FOR COMPLETION
JRST RESTAR ;PARSE NEXT COMMAND
MUSERR: SKIPA T1,[[ASCIZ /%Magtape unit specification required/]]
NTDERR: MOVEI T1,[ASCIZ /%Dumping to magtape is not supported/]
PUSHJ P,PRMSG ;PRINT MESSAGE
PJRST PRCRLF ;END THE LINE AND RETURN
SUBTTL SCAN TAPE FOR SPECIFIED FILE
;THIS ROUTINE IS LIKE FNDMON, FNDMFD, ET AL FOR TAPES. IT SEARCHES
;THE TAPE FOR THE SPECIFIED FILE AND WHEN FOUND READS THE DIRECTORY
;OF THE .EXE FILE INTO BUF. FLOW THEN BRANCHES BACK TO FNDMON.
TAPSCN: MOVE T1,DEV ;GET WHAT THEY TYPED
MOVEM T1,SAVDEV ;SAVE IT FOR LATER
TAPSC1: PUSHJ P,READBL ;READ TAPE BLOCK
JRST .-1 ;IGNORE EOF
MOVE T1,TAPBUF+G$TYPE ;GET RECORD TYPE WORD
SKIPLE T1 ;CHECK FOR LEGAL RECORD TYPE
CAILE T1,T$MAX ;...
JRST TAPSC6 ;NOT A BACKUP RECORD, IGNORE THIS FILE
CAIN T1,T$FIL ;FILE RECORD?
JRST TAPSC3 ;YES
CAIN T1,T$END ;END OF SAVESET?
JRST TAPSCE ;YES, FILE NOT FOUND
JRST TAPSC1 ;NO, KEEP LOOKING FOR T$FIL OR T$END
TAPSC3: MOVE T1,TAPBUF+G$FLAG ;GET FLAGS WORD
TLNN T1,(GF$SOF) ;START OF A FILE?
JRST TAPSC1 ;NO, KEEP LOOKING
MOVEI P1,TAPBUF+MTHLEN+1 ;POINT AT DATA AREA
TLZ S,(FL.EXS) ;NO EXTENSION SEEN YET
TAPSC4: PUSHJ P,FDCODE ;PICK UP NEXT SUB-BLOCK
JRST TAPSC5 ;DONE, SEE IF WE WON
CAIL T1,.FCDIR ;DIRECTORY INFORMATION?
SUBI T1,<.FCDIR-.FCEXT>-1 ;YES, REMOVE OFFSET
CAIN T1,.FCDEV ;DEVICE?
TLNN S,(FL.WLD) ;YES, WILD STRUCTURE?
SKIPA ;NO
MOVEM T2,DEV ;OVER-RIDE WHATEVER JUNK IS THERE
CAME T2,FILSPC-1(T1) ;COMPARE WITH WHAT USER TYPED
JRST TAPSC1 ;DIDN'T MATCH, KEEP LOOKING
JRST TAPSC4 ;OK SO FAR, TRY NEXT SUB-BLOCK
TAPSC5: TLNN S,(FL.EXS) ;DID WE GET AN EXTENSION?
SKIPN EXT ;NO, WAS ONE SPECIFIED?
JRST FOUND ;WE WON
JRST TAPSC1 ;CLOSE, BUT NO CIGAR
TAPSC6: PUSHJ P,SKPEOF ;SKIP TO END OF (TAPE) FILE
JRST TAPSC1 ;START WITH NEW FILE
TAPSCE: MOVE T1,SAVDEV ;GET SAVED DEV
MOVEM T1,DEV ;AS YOU WERE
TLZ S,(FL.WLD) ;NO LONGER A WILD STRUCTURE
PUSHJ P,REWIND ;REWIND THE TAPE
; PUSHJ P,CHKREW ;MIGHT BE USEFUL TO WAIT
JRST FNTERR ;GIVE FILE NOT FOUND ERROR
;HERE WHEN THE DESIRED FILE WAS FOUND.
FOUND: SETZM BLKNUM ;START AT BEGINNING OF THE FILE
PUSHJ P,RDNXTB ;READ NEXT TAPE BLOCK
MOVSI T1,TAPBUF+MTHLEN ;"FROM" ADDRESS
HRRI T1,BUF ;"TO" ADDRESS
BLT T1,BUF+BLKSIZ-1 ;COPY ONE BLOCK
JRST FNDMOE ;CONTINUE LIKE DISK FILE
;ROUTINE TO GET THE NEXT SUB-BLOCK FROM THE TAPE BUFFER.
;CALL WITH P1 POINTING AT NEXT SUB-BLOCK, RETURNS SUB-BLOCK
;TYPE IN T1 AND SUB-BLOCK CONTENTS IN T2, AND P1 UPDATED.
FDCODE: HLRZ T1,(P1) ;GET TYPE CODE
JUMPE T1,CPOPJ ;DONE IF ZERO
CAIG T1,.FCEXT ;DEVICE, NAME, OR EXTENSION?
JRST FDCOD1 ;YES
CAIGE T1,.FCDIR ;DIRECTORY?
POPJ P, ;NO
FDCOD1: CAIN T1,.FCEXT ;EXTENSION?
TLO S,(FL.EXS) ;YES, REMEMBER THAT
HRRZ P2,(P1) ;GET WORD COUNT
SUBI P2,1 ;WHICH INCLUDES WORD COUNT WORD
MOVEI P1,1(P1) ;POINT AT DATA
HRLI P1,(POINT 7) ;IT'S ASCII DATA
SETZB T2,T3 ;T2 GETS THE ANSWER IF SIXBIT, T3 IF PPN
CAIE T1,.FCDIR ;PPN?
MOVE T3,[POINT 6,T2] ;NO, EVERYTHING ELSE IS SIXBIT
FDCOD2: TLNN P1,760000 ;DONE WITH THIS WORD?
SOJLE P2,FDCOD5 ;YES, GO IF WORD COUNT EXHAUSTED
ILDB T4,P1 ;GET NEXT CHARACTER
JUMPE T4,FDCOD5 ;DONE IF NULL
CAIN T1,.FCDIR ;PPN?
JRST FDCOD3 ;YES
SUBI T4," "-' ' ;MAKE SIXBIT
TLNE T3,770000 ;WORD FULL?
IDPB T4,T3 ;NO, STORE THIS BYTE
JRST FDCOD2 ;LOOP FOR MORE
FDCOD3: CAIN T4,"_" ;DONE WITH PROJECT?
JRST FDCOD4 ;YES
ROT T4,-3 ;ACCUMULATE IN ANSWER
LSHC T3,3
JRST FDCOD2 ;LOOP FOR MORE
FDCOD4: HRL T2,T3 ;PROJECT IN LH
SETZ T3, ;START WITH ZERO PROGRAMMER NUMBER
JRST FDCOD2 ;LOOP FOR THAT
FDCOD5: CAIN T1,.FCDIR ;PPN?
HRR T2,T3 ;YES, GET PROGRAMMER NUMBER
AOJA P1,CPOPJ1 ;POINT AT NEXT WORD AND EXIT
SUBTTL MAGTAPE EQUIVALENT TO REDBLK
;ROUTINE TO READ ONE OR MORE BLOCKS OF AN EXE FILE FROM A MAGTAPE.
;CALL: P2/NUMBER OF BLOCKS TO READ
; P3/CORE ADDRESS OF WHERE TO READ FIRST BLOCK
; P4/FILE BLOCK NUMBER OF FIRST BLOCK
; PUSHJ P,REDTAP
;RETURN+1 IF ERROR WITH ERROR CODE IN T1
;RETURN+2 IF SUCCESSFUL WITH P3 AND P4 UPDATED TO REFLECT THE TRANSFER.
REDTAP: TRNE P2,3 ;MUST BE A MULTIPLE OF 4 BLOCKS
HALT . ;NOT TOO GOOD
JUMPLE P2,CPOPJ1 ;READ ALL BLOCKS YET?
PUSHJ P,RDNXTB ;READ NEXT TAPE BLOCK
MOVE T1,P3 ;COPY ADDRESS
LSH T1,W2PLSH ;BACK TO A PAGE NUMBER
HRRM T1,EPT+.MMOVE ;SET UP MAPPING
CLRPT .VMOVE ;MAKE NEW MAPPING VISIBLE
MOVE T1,[TAPBUF+MTHLEN,,.VMOVE] ;SET UP A BLT
BLT T1,.VMOVE+PAGSIZ-1 ;TRANSFER THE PAGE
ADDI P3,PAGSIZ ;ACCOUNT FOR THE PAGE JUST READ
ADDI P4,PAGSIZ/BLKSIZ ;...
SUBI P2,PAGSIZ/BLKSIZ ;...
JRST REDTAP ;CONTINUE FOR ALL
;ROUTINE TO READ NEXT TAPE BLOCK FOR A FILE
;CALL: PUSHJ P,RDNXTB
;RETURN+1 ALWAYS
RDNXTB: PUSHJ P,READBL ;READ A TAPE BLOCK
ERROR (<Tape mark in middle of file>)
MOVE T1,TAPBUF+G$TYPE ;GET RECORD TYPE
MOVE T2,TAPBUF+G$FLAG ;GET RECORD FLAGS
CAIN T1,T$FIL ;STILL A FILE RECORD?
TLNN T2,(GF$SOF) ;YES, START OF NEXT FILE?
JRST RDNXT1 ;NO, ALL IS WELL
ERROR (<BACKUP file inconsistant>)
RDNXT1: TLNE T2,(GF$RPT) ;REPEATER RECORD?
JRST RDNXTB ;YES, WE WON ON THE ORIGINAL
MOVE T1,TAPBUF+G$SIZ ;GET DATA SIZE
CAIE T1,PAGSIZ ;SOMETHING WE DON'T KNOW ABOUT?
ERROR (<BACKUP file inconsistant>)
MOVEI T1,PAGSIZ/BLKSIZ ;NUMBER OF BLOCKS WE READ
ADDM T1,BLKNUM ;WHERE WE ARE POSITIONED NOW
POPJ P, ;RETURN
;ROUTINE TO READ NEXT BLOCK FROM A TAPE. CALLS DEVICE DEPENDENT DRIVER
;TO PERFORM THE ACTUAL I/O.
READBL: SETZM EOF ;CLEAR END OF FILE FLAG
PUSHJ P,CHKREW ;MAKE SURE NOT REWINDING
MOVEI M,ERRTRY ;NUMBER OF RETRIES ON READ ERROR
READB1: PUSHJ P,@RTRTAB(W) ;READ THE NEXT RECORD
JRST READE ;ERROR
READB2: SKIPN EOF ;DID WE ENCOUNTER END OF FILE?
AOS (P) ;NO, SET FOR SKIP RETURN
POPJ P, ;RETURN
;HERE ON A READ ERROR
READE: CAIN M,ERRTRY ;FIRST RETRY?
JRST READE3 ;YES
READE1:
IFN FTDX10,<
HRRZ T1,W ;GET TYPE INDEX
CAIN T1,DX1OFS ;IF A TU70, THE DX10 HAS ALREADY RETRIED
JRST READE2 ; THE OPERATION, SO JUST GIVE UP
>; END IFN FTDX10
PUSHJ P,BACKSP ;REPOSITION
SOJG M,READB1 ;TRY AGAIN
PUSHJ P,SKIPRC ;SKIP BAD RECORD
READE2: ERROR (<Tape read error>)
READE3: MOVEI M,1 ;COUNT OF RECORDS READ
PUSHJ P,@RTRTAB(W) ;READ THE NEXT RECORD
AOJA M,.-1 ;THAT ONE'S BAD TOO
MOVE T1,TAPBUF+G$FLAG ;GET FLAGS WORD
TLNE T1,(GF$RPT) ;REPEAT OF A BAD RECORD?
JRST READB2 ;YES, WE WON
PUSHJ P,BACKSP ;NO, REPOSITION
SOJG M,.-1 ; TO THE ORIGINAL BAD RECORD
MOVEI M,ERRTRY ;RESET COUNTER
JRST READE1 ;AND RETRY IT
SUBTTL MISCELLANEOUS MAGTAPE ROUTINES
;ROUTINE TO REWIND THE TAPE.
;CALL: PUSHJ P,REWIND
;RETURN+1 ALWAYS
REWIND: PUSHJ P,CHKREW ;MAKE SURE NOT ALREADY REWINDING
TLO S,(FL.REW) ;REMEMBER WE ARE REWINDING
PJRST @REWTAB(W) ;CALL DEVICE DRIVER
;ROUTINE TO CHECK IF REWINDING AND WAIT FOR COMPLETION.
;CALL: PUSHJ P,CHKREW
;RETURN+1 ALWAYS
CHKREW: TLZN S,(FL.REW) ;ARE WE REWINDING?
POPJ P, ;NO, RETURN
PJRST @CHKTAB(W) ;CALL DEVICE DRIVER, RETURN WHEN REWIND COMPLETED
;ROUTINE TO SKIP TO END OF FILE.
;CALL: PUSHJ P,SKPEOF
;RETURN+1 ALWAYS
SKPEOF: SETZM EOF ;GUARANTEE WE SEE A LATER ONE
PUSHJ P,SKIPRC ;SKIP A RECORD
SKIPN EOF ;EOF YET?
JRST SKPEOF ;NO, LOOP
POPJ P, ;YES, RETURN
;ROUTINE TO SKIP FORWARD OR BACKWARD ONE RECORD.
;CALL: PUSHJ P,SKIPRC/BACKSP
;RETURN+1 ALWAYS
SKIPRC: TDZA T4,T4 ;REMEMBER FORWARD SPACE
BACKSP: MOVEI T4,1 ;REMEMBER BACK SPACE
PUSH P,T4 ;SAVE ENTRY FLAG
PUSHJ P,CHKREW ;MAKE SURE NOT REWINDING
POP P,T4 ;RESTORE FLAG
JRST @SKPTAB(W) ;CALL DEVICE DRIVER
;ROUTINE TO WAIT FOR UNIT TO SHOW DESIRED STATUS
;CALL: PUSHJ P,TWAIT
; <INSTR TO EXECUTE> ;SKIP WHEN SUCCESSFUL
TWAIT: MOVSI T1,(1B12) ;TIME TO WAIT FOR STATUS
XCT @(P) ;EXECUTE INSTR
SOJG T1,.-1 ;'ROUND
JUMPN T1,CPOPJ1 ;SUCCESS
ERROR (<No magtape status>)
;I/O INSTRUCTIONS, ROUTINE TO READ REGISTER, ETC.
TAPCNO: CONO 0,(T2) ;CONO
TAPDTO: DATAO 0,T2 ;DATAO
STALL ;WAIT A WHILE
TAPDTI: DATAI 0,T2 ;DATAI
ANDI T2,177777 ;ONLY 16 BITS OF INTEREST
POPJ P, ;RETURN
SUBTTL TABLES DRIVING DEVICE DEPENDENT MAGTAPE I/O
;THE FOLLOWING TABLES CONTROL MAGTAPE I/O AND POSITIONING.
;ALL ARE INDEXED BY CONTROLLER TYPE.
DEFINE DADDR(ADDR,OFS,FTS),<
IFN FTS,<
OFS==.-RESTAB
EXP ADDR
>
>
;ROUTINE TO FIND AND RESET THE CONTROLLER
RESTAB: DADDR (DX1RES,DX1OFS,FTDX10)
DADDR (TM2RES,TM2OFS,FTTM02)
DADDR (DX2RES,DX2OFS,FTDX20)
DADDR (T78RES,T78OFS,FTTM78)
DEFINE DADDR(ADDR,FTS),<
IFN FTS,<
EXP ADDR
>
>
;ROUTINE TO READ ONE TAPE RECORD INTO TAPBUF
RTRTAB: DADDR (DX1RED,FTDX10)
DADDR (TM2RED,FTTM02)
DADDR (DX2RED,FTDX20)
DADDR (T78RED,FTTM78)
;ROUTINE TO SKIP A TAPE RECORD (T4=0 IF FORWARD, =1 IF BACKWARD)
SKPTAB: DADDR (DX1SKR,FTDX10)
DADDR (TM2SKR,FTTM02)
DADDR (DX2SKR,FTDX20)
DADDR (T78SKR,FTTM78)
;ROUTINE TO REWIND THE TAPE
REWTAB: DADDR (DX1REW,FTDX10)
DADDR (TM2REW,FTTM02)
DADDR (DX2REW,FTDX20)
DADDR (T78REW,FTTM78)
;ROUTINE TO CHECK IF REWINDING
CHKTAB: DADDR (DX1CHK,FTDX10)
DADDR (TM2CHK,FTTM02)
DADDR (DX2CHK,FTDX20)
DADDR (T78CHK,FTTM78)
SUBTTL DX10/TX01 ROUTINES
IFN FTDX10,<
;DX10 RESET ROUTINE
DX1RES: CONO PDC,1 ;SELECT A PI ASSIGNMENT
CONI PDC,T1 ;READ IT BACK
CONO PDC,0 ;CLEAR PI ASSIGNMENT
TRNN T1,7 ;DEVICE PRESENT?
ERROR (<No DX10 present>)
;DID WE JUST CLOBBER THIS BIT ABOVE?
TLNE T1,(TX.RUN) ;'8 RUNNING?
JRST DX1IN2 ;YES - PROCEDE
PUSHJ P,UPRES ;NO - RESET
PUSHJ P,LODX10 ;LOAD DX10
PUSHJ P,UPHALT ;MAKE SURE HALTED
MOVSI T4,-UPMTBL ;CHECK MAGIC LOCS
DX1IN1: HLRZ T3,UPMTAB(T4) ;GET ADDRESS
PUSHJ P,UPMRD ;READ CONTENTS
HRRZ T3,UPMTAB(T4) ;GET EXPECTED VALUE
CAME T2,T3 ;MATCH?
TX.NRN: ERROR (<Cannot start DX10>)
AOBJN T4,DX1IN1 ;YES - TRY MORE
TX.IST: MOVEI T3,UP.SA ;SET START ADDRS
PUSHJ P,UPSTRT ;START IT
DX1IN2: PUSHJ P,CLRICP ;CLEAR ICPC AREA
PUSHJ P,CLRCHN ;CLEAR CHL & SET ICPC
CONI PDC,T1 ;GET STATUS
TLNN T1,(TX.RUN) ;STILL RUNNING
JRST TX.NRN ;NO - INFORM USER
MOVEI J,CHPRG ;SET UP PNTR TO PROGRAM
MOVEI T1,TX.NOP ;DEVICE COMMAND NOOP
PUSHJ P,TX.CMD ;BUILD A DEVICE COMMAND
MOVSI T1,(CH.STS!CH.FRC);FORCE SENSE BYTES
MOVEM T1,CHPRG+1 ;STORE IN CHL PROG
PUSHJ P,TX.SXS ;START CHL ETC.
PUSHJ P,TWAIT ;WAIT FOR DONE
CONSO PDC,TX.STA ;STATUS AVAILABLE
PUSHJ P,CLRSTA ;CLR STATUS AVAIL NOW
MOVE T1,CHSNS+SB1 ;GET SENSE BYTE 1
MOVEI T2,5 ;ASSUME 9-TK
TLNE T1,(SB17TK) ;TEST FOR 7-TK
HRROI T2,6 ;IT IS , SET 6 BYTE/WD
MOVEM T2,TX.MOD ;SAVE IN MODE WORD
POPJ P, ;RETURN
;READ ROUTINE
DX1RED: MOVEI J,CHPRG ;SET UP CHL PGM PNTR
SKIPGE TX.MOD ;7-TK DRIVE?
PUSHJ P,TX.7MD ;SET 7 TRACK MODE
MOVEI T1,TX.FRD ;FWD READ CODE
PUSHJ P,TX.CMD ;BUILD COMMAND
MOVEI T1,TX.9TK ;ASSUME 9 TRACK MODE
SKIPG TX.MOD ;IS IT?
MOVEI T1,TX.7TK ;NO - USE DIFFERENT MODE
DPB T1,[POINT 2,0(J),6] ;SET INTO COMMAND
MOVSI T1,-LNMTBF ;GET LENGTH OF BUFFER
HRRZ T2,TX.MOD ;GET MODE WORD
IMUL T1,T2 ;GET BYTE COUNT IN LH
LSH T1,4 ;POSITION
ADD T1,TAPBFA ;ADD IN PHYSICAL ADDRESS OF TAPE BUFFER
MOVEM T1,1(J) ;STORE IN CHL PGM
MOVSI T1,(CH.STS!CH.FRC)
MOVEM T1,2(J) ;STORE STATUS & SENSE BYTES
TX.XFR: PUSHJ P,TX.SXS ;SET UP XS AREA & START XFR
PUSHJ P,TWAIT ;NOW WAIT TILL DONE
CONSO PDC,TX.STA
PUSHJ P,DX1CKE ;CHECK FOR CHL ERRORS
PUSHJ P,CLRSTA ;CLEAR STATUS AVAIL NOW
TLNN T3,(CS.DSF) ;DSR FLAG?
JRST CPOPJ1 ;NO - EVERTHING OK
TLNN T3,(DS.UEX) ;UNIT EXCEPTION?
POPJ P, ;NO - JUST ERROR
SETOM EOF ;YES - MUST BE EOF
TLNN T3,(DS.UCH!CS.DPE) ;UNIT CHECK ALSO
AOS 0(P) ;NO - OK RETURN
POPJ P, ;ERROR ALSO
;SET UP XS AREA AND START XFER
TX.SXS: MOVSI T1,-LSNS_4 ;CONSTRUCT XFER FOR SENSE BYTES
ADD T1,CHSNSA ;PHYSICAL ADDRS OF XS AREA
MOVEM T1,ICPC+3 ;STORE IN ICPC AREA
JRST TX.GO ;START CHL
UPMTAB: XWD 17,4756
XWD 200,5210
XWD 210,6007
XWD 211,3777
XWD 212,3774
XWD 215,6502
UPMTBL==.-UPMTAB
;REWIND ROUTINE
DX1REW: MOVEI J,CHPRG ;ADDRS OF CHL PROG
MOVEI T1,TX.REW ;REWIND CMD
PUSHJ P,TX.CMD ;BUILD IT
MOVSI T1,(CH.STS) ;CHL TERMINATION WORD
MOVEM T1,1(J) ;STASH IN PRG
SETZM ICPC+3 ;NO SENSE BYTES
PUSHJ P,TX.GO ;START CHL
PUSHJ P,TWAIT ;NOW WAIT TILL STARTED
CONSO PDC,TX.STA
PUSHJ P,DX1CKE ;CHECK CORRECT STATUS
JRST CLRSTA ;AND CLEAR STATUS AVAIL.
;SKIP RECORD ROUTINE
DX1SKR: MOVEI J,CHPRG ;ADDRS OF CHL PROG
SKIPG TX.MOD ;CHECK FOR 7TK
PUSHJ P,TX.7MD ;YES - SET UP MODE SET STUFF
MOVE T1,[TX.FSR
TX.BSR](T4) ;SET CORRECT CMD
PUSHJ P,TX.CMD ;...
MOVSI T1,(CH.STS!CH.FRC)
MOVEM T1,1(J) ;FORCE SENSE
PUSHJ P,TX.XFR ;SET XS AND START CHL
JFCL ;IGNORE ERRORS
POPJ P, ;EXIT
;WAIT FOR REWIND TO COMPLETE
DX1CHK: CONSO PDC,TX.STA ;WAIT FOR STATUS AVAIL
JRST .-1
LDB T1,[POINT 2,ICPC+1,10]
CAIE T1,CS.STC ;CHECK CU STATUS
ERROR (<Not CU status>)
CLRSTA: CONO PDC,TX.ILI!TX.STA ;CLEAR STATUS AVAIL
POPJ P, ;RETURN
;ROUTINE TO CHECK ON CHL ERRORS
;RETURNS C(T3) := CSR/DSR
DX1CKE: MOVE T3,ICPC+1 ;GET ST1
CONI PDC,T2 ;GET CONI STATUS
TRNN T2,TX.UPE!TX.MPE!TX.NXM
TLNE T3,(CS.SLE!CS.SQE)
TX.LOS: ERROR (<Fatal DX10 error or drive off-line>)
LDB T1,[POINT 2,ICPC+1,10]
CAIE T1,CS.STE ;GRNTEE ENDING STATUS
ERROR (<Not ending status>)
TRNE T3,CS.NFG!CS.INC
JRST TX.LOS ;SOMETHING WORSE COULDN'T HAPPEN
POPJ P, ;RETURN
;DX10 UTILITIES FOR THE PDP8
UPHALT: MOVEI T2,DO.UC0 ;SELECT CTL 0
PUSHJ P,UPRSEL ;...
MOVEI T2,DU0HLT ;SET HALT
DATAO PDC,T2 ;...
POPJ P,
UPRES: MOVSI T2,(DO.RES) ;ISSUE RESET CMD
DATAO PDC,T2
POPJ P, ;RETURN
UPSTRT: MOVEI T2,DO.UC1 ;SELECT CTL 1
PUSHJ P,UPRSEL ;...
ANDI T3,7777 ;VALIDATE ADDRS
DATAO PDC,T3 ;SEND ADDRS
MOVEI T2,DO.UC0 ;SELECT CTL 0
PUSHJ P,UPRSEL ;...
MOVEI T2,DU0CON ;SET CONTINUE
DATAO PDC,T2 ;...
POPJ P, ;RETURN
UPRSEL: TLO T2,(DO.LRS) ;LOAD REG SELECT BIT
DATAO PDC,T2 ;SELECT REGISTER
POPJ P, ;RETURN
;READ MEMORY LOC IN DX10
;C(T3) := ADDRS , RESULT INTO T2
UPMRD: MOVEI T2,DO.UC1 ;SELECT CTL 1
PUSHJ P,UPRSEL ;...
ANDI T3,7777 ;GRNTEE VALID ADDRS
DATAO PDC,T3 ;SEND IT OUT
MOVEI T2,DO.UC0 ;SELECT CTL 0
PUSHJ P,UPRSEL ;...
MOVEI T2,DU0EXM ;EXAMINE ENABLE
DATAO PDC,T2 ;SEND IT OUT
DATAI PDC,T2 ;READ REG
ANDI T2,7777 ;ONLY BITS OF INTEREST
POPJ P, ;RETURN
;ROUTINE TO CLEAR ICPC AREA
CLRICP: SETZM ICPC ;CLEAR 1ST WORD
SETZM ICPC+1
SETZM ICPC+2
SETZM ICPC+3 ;THROUGH 4TH WORD
POPJ P, ;RETURN
;ROUTINE TO SET UP CHL STUFF
CLRCHN: MOVEI T1,ICPC ;ADDRS OF CHL AREA
LSH T1,^D9 ;PROPER POSITION
IORI T1,TX.UPE!TX.MPE!TX.NXM!TX.STA
CONO PDC,(T1) ;CLEAR ERROR FLGS & SET ICPC
POPJ P, ;RETURN
;ROUTINE TO SETUP CHL COMMAND C(T1) := CMD
TX.CMD: SETZM 0(J) ;CLEAR CMD WORD
DPB T1,[POINT 8,0(J),23] ;SET CMD IN PLACE
MOVSI T1,(CH.COP) ;SAY ITS A CHL OPR
IORM T1,0(J) ;PUT INTO CMD
MOVE T1,TAPUNI ;GET UNIT #
DPB T1,[POINT 8,0(J),35]
POPJ P, ;RETURN
;ROUTINE TO START CHL
TX.GO: MOVE T1,CHPRGA ;GET PHYSICAL ADDRESS OF CHANNEL PROGRAM
TLO T1,(CH.JMP!CH.GO) ;BUILD JUMP CCW
MOVEM T1,ICPC ;PUT IN ICPC
CONSZ PDC,TX.STA ;THIS BETTER NOT BE ON
ERROR (<Channel synchronization error>)
CONO PDC,TX.ILI!TX.CON!TX.CLR
POPJ P, ;START AND RETURN
;ROUTINE TO SETUP 7 TRACK MODE SET CMD
TX.7MD: SKIPE T1,TAPDEN ;SEE IF DENSITY SPECIFIED
CAILE T1,3 ;CHECK MAX ALLOWED
MOVEI T1,3 ;ELSE USE DEFAULT
MOVE T1,TX.DTB(T1) ;GET DENSITY CMD
PUSHJ P,TX.CMD ;FINISH COMMAND
AOJA J,CPOPJ ;ADVANCE CHL PGM POINTER AND RETURN
;TX01/DX10 DENSITY TABLE
TX.DTB: TX.D78 ;800 BPI DEFAULT
TX.D72 ;200
TX.D75 ;556
TX.D78 ;800
;ROUTINE TO LOAD THE DX10 MICROCODE.
;CALL: PUSHJ P,LODX10
;DOESN'T RETURN IF MICROCODE NOT PRESENT IN BOOT
;RETURN+1 IF MICROCODE LOADED
LODX10: PUSHJ P,SAVE2 ;FREE UP P1 AND P2
DMOVE P1,BTSVEC+.BTUCD+.BTTX1 ;GET POINTERS TO DX10 MICROCODE
SKIPN P1 ;MICROCODE PRESENT?
ERROR (<DX10 microcode not present>)
SUBI P1,1 ;DON'T INCLUDE VERSION WORD IN WORD COUNT
IMULI P1,3 ;CONVERT WORD COUNT TO NUMBER OF 12-BIT BYTES
ADDI P2,BTSVEC+1 ;CHANGE OFFSET INTO ADDRESS, SKIP VERSION WORD
HRLI P2,(POINT 12) ;MAKE A 12-BIT BYTE POINTER
DATAO PDC,[DO.LRS!DO.UC1] ;SELECT CPMA ON IBUS
DATAO PDC,[0] ;LOAD ADDRESS 0
DATAO PDC,[DO.LRS!DO.UC0] ;SELECT 8A CONTROL REGISTER
LDX101: ILDB T1,P2 ;GRAB A BYTE
TRO T1,DU0DEP ;SET ENABLE DEPOSIT BIT
DATAO PDC,T1 ;WRITE WORD INTO MEMORY
SOJGE P1,LDX101 ;WRITE ALL WORDS
MOVEI T1,[ASCIZ /[TX01 microcode %/]
PUSHJ P,PRMSG ;PRINT MESSAGE
MOVE T1,BTSVEC+.BTUCD+.BTTX1+1 ;GET OFFSET TO MICROCODE
MOVE T1,BTSVEC(T1) ;GET VERSION WORD
PUSHJ P,PRVRSN ;PRINT IT
MOVEI T1,[ASCIZ / loaded on DX10 /]
PUSHJ P,PRMSG ;MORE NOISE
MOVEI T1,PDC ;DEVICE CODE
PUSHJ P,PROCT ;PRINT IT
PUSHJ P,PRRBKT ;PRINT RIGHT BRACKET
PJRST PRCRLF ;PRINT CRLF AND RETURN
>; END IFN FTDX10
SUBTTL TM02 ROUTINES
IFN FTTM02,<
;TM02/RH10/RH20 (TU16/TU45) READ ROUTINES
IFN FTKL10,< ;THIS VERSION FOR THE KL
;FIND AND RESET CONTROLLER
TM2RES: MOVEI T1,270/4 ;SEARCH FOR RIGHT DEVICE CODE
SETZ J, ;ASSUME RH10
TM2RS1: DPB T1,[POINT 7,TAPDTO,9] ;TRY THIS CONTROLLER
DPB T1,[POINT 7,TAPDTI,9]
DPB T1,[POINT 7,TAPCNO,9]
JUMPE J,TM2RS2 ;IF AN RH20,
MOVEI T2,CO.2ME ;MASSBUS ENABLE
XCT TAPCNO
TM2RS2: MOVE T2,TAPUNI ;UNIT WE'RE TALKING TO
HRLI T2,(T2.DTC!T2.DLR) ;SET TO TALK TO IT
XCT TAPDTO ;TELL TAPE CONTROL REG
MOVSI T2,(DO.XDT) ;READ DRIVE TYPE REGISTER
PUSHJ P,TAPDTO
MOVE T3,T2 ;PRESERVE DT REG
ANDI T2,770 ;MASK DRIVE TYPE
CAIE T2,TY.T3L ;IS IT A TM03?
CAIN T2,TY.T2L ; NO, IS IT A TM02?
JRST TM2RS3 ;YES, WE'RE THERE
ADDI T1,1 ;NO, TRY NEXT CONTROL
CAIN T1,300/4 ;AFTER 274 IS 360
MOVEI T1,360/4
CAIG T1,374/4 ;TRIED LAST RH10 DEV CODE?
JRST TM2RS1 ;NO, TRY THIS ONE
MOVEI J,1 ;TRY THE RH20'S
CAIG T1,LSTICD/4
JRST TM2RS1 ;UNLESS WE TRIED ALL OF THEM
ERROR (<No RH20 for TM02>)
TM2RS3: DPB T1,[POINT 7,TM2CSO,9] ;SET DEV CODE IN CONSO INSTRUCTION
TRNE T3,10000 ;IS IT 9-TRACK?
HRROS J ;NO, 7-TRACK
LSH T1,2 ;COMPUTE INITIAL CNTRL WRD ADDRESS
ADDI T1,EPT-540 ; IF THIS IS AN RH20
HRRM T1,TM2.IC
POPJ P, ;AND RETURN
;READ ROUTINE
TM2RED: PUSHJ P,TM2STC ;SET UP TAPE CONTROL REG
MOVEI T2,515410 ;CLEAR ERRORS, MASSBUS ENABLE
XCT TAPCNO ;CLEAR THE RH20
MOVEI T2,LNMTBF ;BUFFER SIZE
MOVEI T3,5 ;COMPUTE FRAME COUNT
SKIPGE J ;9-TRACK?
ADDI T3,1 ;NO
IMULI T2,(T3)
ANDI T2,177777 ;TELL FRAME-COUNT REG
HRLI T2,(T2.DFC!T2.DLR)
XCT TAPDTO
MOVE T1,TAPBFA ;GET PHYSICAL ADDRESS OF TAPE BUFFER
TRNN J,1 ;RH20?
JRST TM2RH1 ;NO
TLO T1,600000+<LNMTBF_4> ;SET TRA+LAST AND WORD COUNT
MOVE T2,[200000,,BOOTWD] ;JUMP TO IOWD
TM2.IC: MOVEM T2,. ;STORE INITIAL JUMP (ADDR PATCHED)
JRST TM2RD2 ;CONTINUE
TM2RH1: SUBI T1,1 ;MAKE RH-10 STYLE CCW
TLO T1,-<LNMTBF_4> ;SET -VE WORD COUNT
TM2RD2: MOVEM T1,BOOTWD ;SAVE IOWD
SETZM BOOTWD+1 ;TERMINATE IO LIST
TRNE J,1 ;IF AN RH20
SKIPA T2,[716200,,377000!T2.RDF] ;READ RH20-STYLE
MOVE T2,[T2.DRH!T2.DLR+BOOTWD_6!T2.RDF] ;READ RH10-STYLE
XCT TAPDTO ;START THE OPERATION
PUSHJ P,TWAIT ;WAIT TILL JOB DONE COMES UP
TM2CSO: CONSO ,T2.DON
TM2.RB: MOVSI T2,(T2.DSR) ;READ STATUS REG
PUSHJ P,TAPDTO
TRNE T2,T2.SEF ;EOF?
SETOM EOF ;YES
TRNN T2,T2.SER ;ERROR?
JRST TM2RD3 ;NO, WE WON
MOVE T1,T2 ;PRESERVE STATUS REG
MOVSI T2,(T2.DER) ;READ THE ERROR REG
PUSHJ P,TAPDTO
TRNE T1,T2.SPE ;PE MODE?
TRZ T2,T2.NER ;YES, THESE AREN'T ERRORS
TRNN T2,T2.ERR ;ERROR?
TM2RD3: AOS (P) ;NO ERROR, SKIP-RETURN
MOVE T2,[T2.DLR+T2.DCF] ;CLEAR OUT THE DRIVE
XCT TAPDTO ; IN CASE OF ANY ERRORS LEFT
POPJ P, ;AND RETURN
;REWIND
TM2REW: PUSHJ P,TM2STC ;TALK TO RIGHT DRIVE
MOVE T2,[T2.DLR+T2.RWF] ;FUNCTIN=REWIND
XCT TAPDTO ;DO IT
PUSHJ P,TWAIT ;WAIT TILL STARTED
PUSHJ P,T2.RWC
POPJ P, ;AND RETURN
;SKIP RECORD ROUTINE
TM2SKR: PUSHJ P,TM2STC ;SET TO TALK TO RIGHT DRIVE
MOVE T2,[T2.DFC!T2.DLR+177777]
XCT TAPDTO ;SET FRAME-COUNT = 1
MOVE T2,[T2.DLR+T2.SFF ;GET RIGHT FUNCTION
T2.DLR+T2.SBF](T4)
XCT TAPDTO ;START THE OPERATION
PUSHJ P,TM2CK1 ;WAIT FOR DRIVE-READY
PUSHJ P,TM2.RB ;CHECK FOR ERRS
JFCL
POPJ P, ;AND RETURN
;WAIT FOR REWIND TO COMPLETE
TM2CHK: PUSHJ P,TM2STC ;TALK TO RIGHT DRIVE
TM2CK1: PUSHJ P,TWAIT ;WAIT
PUSHJ P,T2.RDC ; TILL DRIVE READY IS UP
POPJ P, ;AND RETURN
;ROUTINES TO WAIT
T2.RWC: MOVEI T4,T2.SPP!T2.SBT ;WAIT FOR BOT OR POSITION IN PROGRESS
CAIA
T2.RDC: MOVEI T4,T2.SRY ;WAIT FOR DRIVE READY
MOVSI T2,(T2.DSR) ;READ STATUS REG
PUSHJ P,TAPDTO
TRNE T2,(T4) ;RIGHT BIT UP?
AOS (P) ;YES, SKIP
POPJ P, ;AND RETURN
;ROUTINE TO SET UP THE TAPE-CONTROL REGISTER
TM2STC: SKIPL T2,J ;9-TRACK?
TDZA T2,T2 ;9-TRACK CORE DUMP
MOVEI T2,T2.M7T ;NO, 7-TRACK CORE DUMP
MOVEI T3,4 ;4 OR 5 FRAMES PER WORD
SKIPGE J
SUBI T3,1
SKIPE T1,TAPDEN ;GET DENSITY
CAILE T1,(T3)
MOVEI T1,(T3) ;1=200BPI,...4=1600
ADD T2,TM2DTB(T1) ;SET DENSITY IN DATAO
ADD T2,TAPUNI ;PLUS UNIT NUMBER
HRLI T2,(T2.DTC!T2.DLR) ;TELL TAPE CNTRL REG
XCT TAPDTO ;NOW WE'RE TALKING TO DRIVE
POPJ P, ;AND RETURN
>; END IFN FTKL10
;TM02/RH11 READ ROUTINES
IFN FTKS10,< ;THIS VERSION FOR THE KS
;FIND AND RESET CONTROLLER
TM2RES: SETZ J, ;ASSUME 9-TRACK
MOVE T4,[TRHBAS] ;BASE UBA ADDRESS FOR THE TAPE RH11
MOVEI T1,C2.CLR ;CONTROLLER CLEAR
WRIO T1,MTCS2(T4) ;DO IT
MOVE T1,TAPUNI ;UNIT TO TALK TO
WRIO T1,MTTC(T4) ;SELECT IT
RDIO T2,MTDT(T4) ;GET DRIVE TYPE REGISTER
MOVE T3,T2 ;SAVE A COPY HERE
ANDI T2,770 ;MASK DRIVE TYPE
CAIE T2,TY.T3L ;IS IT A TM03?
CAIN T2,TY.T2L ; NO, IS IT A TM02?
JRST TM2RS1 ;YES--PROCEED
ERROR (<No TM02/TM03 found>)
TM2RS1: TRNE T3,10000 ;IS IT 9-TRACK?
SETO J, ;NO--7-TRACK, SET FLAG
POPJ P, ;RETURN
;READ ROUTINE
TM2RED: PUSHJ P,TM2STC ;SET UP TAPE CONTROL REGISTER
MOVNI T2,LNMTBF ;-VE WORD COUNT
MOVEI T3,5 ;COMPUTE FRAME COUNT
SKIPGE J ;9-TRACK?
ADDI T3,1 ;NO
IMULI T2,(T3)
WRIO T2,MTFC(T4) ;SET FRAME COUNT REG
PUSH P,P1 ;FREE UP AN AC
HLLZ P1,T4 ;PICK UP UBA NUMBER
HRRI P1,SO.UPR ;FORM UBA ADDRESS TO FIRST MAP REGISTER
MOVE T1,TAPBFA ;ADDRESS OF FIRST WORD IN BUFFER
ANDI T1,777 ;PAGE OFFSET OF STARTING ADDRESS
LSH T1,2 ;CONVERT TO -11 BYTE ADDRESS
WRIO T1,MTBA(T4) ;SET IN BUS ADDRESS REGISTER
MOVNI T2,LNMTBF_1 ;-VE WORD COUNT TIMES 2 GIVES -11 WORD COUNT
WRIO T2,MTWC(T4) ;SET IN WORD COUNT REGISTER
MOVE T2,TAPBFA ;PHYSICAL ADDRESS OF TAPE BUFFER
LSH T2,W2PLSH ;CONVERT TO ITS PAGE NUMBER
TRO T2,40000 ;SET THE VALID BIT FOR UBA PAGER
MOVNI T3,LNMTBF ;-VE WORD COUNT
LSH T1,-2 ;PAGE OFFSET OF STARTING ADDRESS
SUBI T1,PAGSIZ-1 ;-NUMBER OF BUFFER WORDS IN 1ST PAGE
SKIPN T1 ;IF ZERO, THEN IT'S THE WHOLE PAGE
TM2RS2: MOVNI T1,PAGSIZ ;-SIZE OF A PAGE
SUB T3,T1 ;ACCOUNT FOR NO. OF WORDS MAPPED BY THIS REGISTER
WRIO T2,(P1) ;SET THE MAP REGISTER ACCORDINGLY
JUMPGE T3,TM2RS3 ;QUIT IF DONE
AOS T2 ;NEXT PAGE IN MEMORY
AOJA P1,TM2RS2 ;NEXT MAP REGISTER TO SET, AND CONTINUE
TM2RS3: POP P,P1 ;RESTORE AC
MOVEI T2,T2.RDF ;READ FORWARD FUNCTION
WRIOB T2,MTCS1(T4) ;START THE TRANSFER
MOVEI T3,C1.RDY ;READY BIT
TION T3,MTCS1(T4) ;TEST IT AND
JRST .-1 ; WAIT TILL IT'S DONE
TMH.RB: RDIO T2,MTDS(T4) ;GET THE DRIVE STATUS REG
TRNE T2,DS.TM ;EOF?
SETOM EOF ;YES--SET FLAG
TRNN T2,DS.ERR ;ERROR?
JRST TM2RS4 ;NO
RDIO T1,MTER(T4) ;GET ERROR REGISTER
TRNE T2,DS.PES ;PHASE ENCODED MODE?
TRZ T1,ER.COR+ER.CS+ER.LRC ;YES, THESE AREN'T ERRORS
TRNN T1,176377 ;ERROR?
TM2RS4: AOS (P) ;NO ERROR, SKIP RETURN
MOVEI T2,T2.DCF ;DRIVE CLEAR FUNCTION
WRIOB T2,MTCS1(T4) ;DO IT
POPJ P, ;RETURN
;REWIND
TM2REW: PUSHJ P,TM2STC ;TALK TO RIGHT DRIVE
MOVEI T1,T2.RWF ;REWIND FUNCTION
WRIOB T1,MTCS1(T4) ;DO IT
PUSHJ P,TWAIT ;WAIT TILL STARTED
PUSHJ P,TH.RWC
POPJ P, ;RETURN
;ROUTINE TO SKIP RECORD
TM2SKR: PUSH P,T4 ;SAVE FUNCTION INDEX
PUSHJ P,TM2STC ;SET UP TAPE CTRL REGISTER
SETO T2, ;-1
WRIO T2,MTFC(T4) ;SET IN FRAME COUNT REGISTER
POP P,T2 ;GET BACK FUNCTION INDEX
MOVE T2,[T2.SFF ;GET RIGHT FUNCTION CODE
T2.SBF](T2)
WRIOB T2,MTCS1(T4) ;START OPERATION
PUSHJ P,TM2CK1 ;WAIT FOR DRIVE READY
PUSHJ P,TMH.RB ;CHECK FOR ERRORS
JFCL
POPJ P, ;RETURN
;WAIT FOR REWIND TO COMPLETE
TM2CHK: PUSHJ P,TM2STC ;TALK TO RIGHT DRIVE
TM2CK1: PUSHJ P,TWAIT ;WAIT TILL
PUSHJ P,TH.RDC ; DRIVE READY IS UP
POPJ P, ;RETURN
;ROUTINES TO WAIT
TH.RWC: SKIPA T3,[DS.PIP+DS.BOT] ;WAIT FOR PIP OR BOT
TH.RDC: MOVEI T3,DS.DRY ;WAIT FOR DRIVE READY
TIOE T3,MTDS(T4) ;RIGHT BIT(S) UP?
AOS (P) ;YES--SKIP RETURN
POPJ P, ;RETURN
;ROUTINE TO SET THE TAPE CONTROL REGISTER
TM2STC: MOVE T4,[TRHBAS] ;BASE UBA ADDRESS FOR TAPE RH11
SKIPL T2,J ;9-TRACK?
TDZA T2,T2 ;YES, 9-TRK CORE DUMP FORMAT
MOVEI T2,T2.M7T ;NO, 7-TRK CORE DUMP FORMAT
MOVEI T3,4 ;4 OR 5 FRAMES PER WORD
SKIPGE J ;7-TRACK?
SUBI T3,1 ;YES--MAX DENSITY POSSIBLE
SKIPE T1,TAPDEN ;GET DENSITY
CAILE T1,(T3)
MOVEI T1,(T3)
ADD T2,TM2DTB(T1) ;PUT IN DENSITY CODE
ADD T2,TAPUNI ;PUT IN SLAVE NUMBER
WRIO T2,MTTC(T4) ;SET TAPE CTRL REGISTER
POPJ P, ;RETURN
>;END IFN FTKS10
TM2DTB: -1
0B27 ;200 BPI
1B27 ;556
2B27 ;800
4B27 ;1600
>;END IFN FTTM02
SUBTTL DX20/TX02 ROUTINES
IFN FTDX20,<
;FIND AND RESET DX20 CONTROLLER
DX2RES: MOVEI T1,FSTICD/4 ;START WITH FIRST INTERNAL CHANNEL
DX2RS1: DPB T1,[POINT 7,TAPDTO,9] ;STORE IN DATAO
DPB T1,[POINT 7,TAPDTI,9] ; AND IN DATAI
DPB T1,[POINT 7,TAPCNO,9] ; AND IN CONO
MOVEI T2,CO.2ME ;MASSBUS ENABLE
XCT TAPCNO ;DO IT
MOVSI T2,(DO.XDT) ;DRIVE TYPE REGISTER
PUSHJ P,TAPDTO ;READ IT
ANDI T2,777 ;KEEP JUST DRIVE TYPE
CAIN T2,TY.DXA ;DX20?
JRST DX2RS2 ;YES
MOVEI T2,CO.XMI ;RESET THE RH TO CLEAR RAE
XCT TAPCNO ;DO IT
CAIGE T1,LSTICD/4 ;GONE PAST THE END?
AOJA T1,DX2RS1 ;TRY NEXT RH
ERROR (<No RH20 for DX20>)
DX2RS2: DPB T1,[POINT 7,DX2CSO,9] ;SET DEVICE CODE IN CONSO INSTRUCTION
LSH T1,2 ;MAKE IT 9 BIT DEVICE CODE (I.E. 540)
ADDI T1,EPT-540 ;COMPUTE ADDR OF 1ST WORD OF LOGOUT
HRRM T1,DX2.IC ;AREA AND SAVE FOR LATER
PUSHJ P,DX2CLE ;CLEAR RH20
MOVSI T2,(D2.STR) ;POINT AT STATUS REGISTER
PUSHJ P,TAPDTO ;READ IT
TRNE T2,D2.RUN ;MICROPROCESSOR RUNNING?
JRST DX2.R3 ;YES, LEAVE IT RUNNING
PUSHJ P,MPRES ;RESET THE MICROPROCESSOR
PUSHJ P,LODX20 ;LOAD THE MICROCODE
PUSHJ P,MPCHK ;CHECK MICROSTORE INTEGRITY
DX2.NR: ERROR (<Cannot start DX20>)
PUSHJ P,MPSTRT ;START THE DX20
MOVSI T2,(D2.STR) ;POINT AT STATUS REGISTER AGAIN
PUSHJ P,TAPDTO ;READ IT
TRNN T2,D2.RUN ;STILL RUNNING?
JRST DX2.NR ;NO, TELL USER
DX2.R3: PUSHJ P,DX2CLE ;CLEAR RH20 AGAIN
MOVE T2,TAPUNI ;GET UNIT NUMBER
HRLI T2,(D2.GP1!D2.LDR) ;POINT AT DRIVE NUMBER REGISTER
XCT TAPDTO ;SELECT THE DRIVE
MOVE T2,[D2.CTR!D2.LDR!D2.SNS] ;GET FORCED SENSE FUNCTION
XCT TAPDTO ;ISSUE THE COMMAND
PUSHJ P,DX2WAT ;WAIT FOR COMMAND TO COMPLETE
PUSHJ P,RDSNS ;READ SENSE BYTES INTO T2
MOVEI J,5 ;ASSUME 9 TRACK WITH 5 FRAMES/WORD
TRNE T2,D2.7TK ;IS IT 7 TRACK?
HRROI J,6 ;YES, MAKE IT 6 FRAMES/WORD
POPJ P, ;RETURN
;DX20 READ ROUTINE
DX2RED: PUSHJ P,DX2CLE ;CLEAR RH20
PUSHJ P,DX2STC ;SELECT DRIVE, DENSITY, MODE
MOVNI T2,LNMTBF ;-VE WORD COUNT
IMULI T2,(J) ;COMPUTE FRAME COUNT
ANDI T2,177777 ;JUST 16 BITS WORTH
HRLI T2,(D2.FCR!D2.LDR) ;POINT AT FRAME COUNT REGISTER
XCT TAPDTO ;TELL THE HARDWARE
MOVE T1,TAPBFA ;PHYSICAL ADDRESS OF TAPE BUFFER
TLO T1,600000+<LNMTBF_4> ;SET TRA+LAST AND WORD COUNT
MOVEM T1,BOOTWD ;SAVE CCW
SETZM BOOTWD+1
MOVE T1,[200000,,BOOTWD] ;JUMP TO IOWD
DX2.IC: MOVEM T1,. ;SAVE IN LOGOUT AREA (ADDR PATCHED)
MOVE T2,[D2.SCR!D2.LDR!D2.RCP!D2.SCS!D2.DTE!177700!D2.RDF]
XCT TAPDTO ;START THE TRANSFER
MOVEI T2,CO.XDN ;GET DONE BIT
PUSHJ P,TWAIT ;WAIT FOR DONE TO COME UP
XCT DX2CSO ;IN THE CONI WORD
DX2XFR: PUSHJ P,DX2CKE ;CHECK FOR ERRORS, RETURN DEVICE STATUS IN T3
JRST DX2CLE ;FOUND ERROR, CLEAR THEM AND RETURN
TRNE T3,D2.UEX ;EOF?
SETOM EOF ;YES, TELL UPPER LEVEL
TRNN T3,D2.UCK ;UNIT CHECK?
AOS (P) ;NO, GIVE GOOD RETURN
JRST DX2CLE ;CLEAR ANY SOFT ERRORS AND RETURN
;ROUTINE TO START REWIND ON A DX20
DX2REW: PUSHJ P,DX2CLE ;CLEAR RH20
PUSHJ P,DX2STC ;SELECT DRIVE
MOVE T2,[D2.CTR!D2.LDR!D2.REW] ;GET REWIND OP
XCT TAPDTO ;START THE REWIND
JRST DX2WAT ;WAIT FOR COMPLETION AND RETURN
;SKIP RECORD
DX2SKR: PUSHJ P,DX2CLE ;CLEAR RH20
PUSHJ P,DX2STC ;SELECT DRIVE
MOVE T2,[D2.FCR!D2.LDR!177777] ;FRAME COUNT REGISTER TO -1
XCT TAPDTO ;SET IT
MOVE T2,[D2.CTR!D2.LDR!D2.SFR
D2.CTR!D2.LDR!D2.SBR](T4) ;GET APPROPRIATE OP
XCT TAPDTO ;START THE OPERATION
PUSHJ P,DX2WAT ;WAIT FOR COMPLETION
PUSHJ P,DX2XFR ;CHECK FOR ERRORS
JFCL ;DON'T CARE
POPJ P, ;RETURN
;ROUTINE TO CHECK FOR REWIND DONE ON A DX20
DX2CHK: MOVSI T2,(D2.GP0) ;POINT AT DEVICE STATUS REGISTER
PUSHJ P,TAPDTO ;READ IT
MOVEI T3,(T2) ;SAVE FOR LATER TEST
PUSHJ P,DX2CLR ;CLEAR RH20/DX20
TRNE T3,D2.DVE ;ALREADY DONE REWINDING?
POPJ P, ;YES, RETURN
DX2CK1: MOVSI T2,(D2.GP4) ;POINT AT ASYNC STATUS REGISTER
PUSHJ P,TAPDTO ;READ IT
JUMPE T2,DX2CK1 ;WAIT FOR IT TO SET
ANDI T2,377 ;ISOLATE JUST THE DRIVE NUMBER
CAME T2,TAPUNI ;BETTER BE THE ONE WE WANT
ERROR (<Wrong drive interrupted>)
POPJ P, ;RETURN
;ROUTINE TO WAIT FOR A NON-DATA TRANSFER OPERATION TO COMPLETE.
DX2WAT: MOVEI T2,D2.ATN ;GET ATTENTION BIT IN CONI
PUSHJ P,TWAIT ;WAIT FOR IT TO COME UP
DX2CSO: CONSO 0,(T2) ;BY DOING A CONSO
POPJ P, ;IT DID, RETURN
;ROUTINE TO CLEAR ALL ERROR ASSOCIATED WITH THE DX20 AND RH20
DX2CLE: PUSHJ P,DX2CLR ;CLEAR RH20/DX20
MOVSI T2,(D2.GP4!D2.LDR) ;GET BITS TO CLEAR ASYNCHRONOUS STATUS
XCT TAPDTO ;REGISTER
POPJ P, ;RETURN
DX2CLR: MOVEI T2,D2.CLR!CO.2ME ;CLEAR RH20 AND ENABLE MASSBUS
XCT TAPCNO ;DO SO
MOVE T2,[D2.ASR!D2.LDR!177] ;SETUP TO CLEAR ATTENTIONS
XCT TAPDTO ;DO SO
MOVSI T2,(D2.ERR!D2.LDR) ;GET BITS TO CLEAR ERROR REGISTER
XCT TAPDTO ;DO SO
POPJ P, ;AND RETURN
;ROUTINE TO READ SENSE BYTES 0 AND 1 FOR A DRIVE INTO T2.
RDSNS: PUSHJ P,TWAIT ;WAIT FOR DX20 TO UPDATE SENSE BYTES
PUSHJ P,[MOVSI T2,(D2.GP0) ;BY READING EXTENDED STATUS
PUSHJ P,TAPDTO ;REGISTER AND WAITING
TRNN T2,D2.RST ;FOR REQUEST STATUS BIT TO
AOS (P) ;CLEAR
POPJ P,]
MOVSI T2,(D2.GP6) ;POINT AT EXTENDED STATUS REGISTER
JRST TAPDTO ;READ BYTES 0 AND 1 AND RETURN
;ROUTINE TO SETUP DRIVE NUMBER, DENSITY, AND MODE FOR A DX20
DX2STC: MOVE T2,TAPUNI ;GET UNIT NUMBER
SKIPLE T3,TAPDEN ;IF DENSITY <=0,
CAILE T3,D2.DTM ; OR > MAX,
MOVEI T3,0 ; USE DEFAULT
MOVE T3,D2.DTB(T3) ;GET TABLE ENTRY FOR THIS DENSITY
SKIPGE J ;IF A 7 TRACK DRIVE,
MOVSS T3 ; USE LH OF ENTRY
TRO T2,(T3) ;SET MODE AND DENSITY
HRLI T2,(D2.GP1!D2.LDR) ;POINT AT CORRECT REGISTER
XCT TAPDTO ;TELL THE DX20
POPJ P, ;AND RETURN
;DENSITY/MODE TABLE FOR DX20'S. LH IS FOR 7 TRACK, RH IS FOR 9 TRACK.
D2.DTB: XWD <3B23+3B27>,<1B23+13B27> ;DEFAULT 7TK=800, 9TK=800
XWD <3B23+1B27>,<1B23+13B27> ;200 BPI 7TK=200, 9TK=800
XWD <3B23+2B27>,<1B23+13B27> ;556 BPI 7TK=556, 9TK=800
XWD <3B23+3B27>,<1B23+13B27> ;800 BPI 7TK=800, 9TK=800
XWD <3B23+3B27>,<1B23+14B27> ;1600 BPI 7TK=800, 9TK=1600
D2.DTM==.-D2.DTB-1
;ROUTINE TO CHECK FOR ERRORS AFTER A DX20 OPERATION. RETURNS
;CPOPJ IF ERROR DETECTED, CPOPJ1 IF NONE, DIES IF REALLY BAD ERROR.
;RETURNS DEVICE STATUS BYTE IN T3
DX2CKE: MOVSI T2,(D2.GP0) ;POINT AT DEVICE STATUS REGISTER
PUSHJ P,TAPDTO ;READ IT
MOVEI T3,(T2) ;MOVE TO WHERE CALLER EXPECTS IT
MOVSI T2,(D2.STR) ;POINT AT STATUS REGISTER
PUSHJ P,TAPDTO ;READ IT
TRNN T2,D2.CER ;COMPOSITE ERROR UP?
JRST CPOPJ1 ;NO, RETURN SUCCESS
MOVSI T2,(D2.ERR) ;POINT AT ERROR REGISTER
PUSHJ P,TAPDTO ;READ IT
TRNE T2,D2.HER ;ANY REALLY BAD ERRORS?
DX2CHE: ERROR (<Hard DX20 error>)
LDB T2,[POINT 4,T2,27] ;GET ERROR CODE
JRST DX2ETB(T2) ;DISPATCH BASED ON ERROR CODE
;ERROR DISPATCH TABLE BASED ON ERROR CODE
DX2ETB: JRST DX2CHE ;0 - UNKNOWN ERROR
JRST CPOPJ1 ;1 - UNUSUAL DEVICE STATUS
JRST CPOPJ1 ;2 - SHORT RECORD
POPJ P, ;3 - LONG RECORD
JRST DX2CHE ;4 - DRIVE SELECTION ERROR
POPJ P, ;5 - PARITY ERROR
POPJ P, ;6 - RECOVERABLE ERROR
JRST DX2CHE ;7 - NON-RECOVERABLE ERROR
JRST DX2CHE ;10- FATAL ERROR
;ROUTINE TO START THE DX20 MICROPROCESSOR.
MPSTRT: PUSHJ P,MPRES ;RESET THE MICROPROCESSOR
MOVE T2,[D2.DR1!D2.LDR!D2.IRE!D2.PCE!D2.PCI!D2.SAD] ;SET BITS
XCT TAPDTO ;TELL DX20 IT'S START ADDRESS
MOVE T2,[D2.MTR!D2.LDR!D2.SMP] ;GET START BIT
XCT TAPDTO ;START THE DX20
POPJ P, ;AND RETURN
;ROUTINE TO RESET THE DX20
MPRES: MOVE T2,[D2.MTR!D2.LDR!D2.RES] ;GET RESET BIT
XCT TAPDTO ;RESET THE DX20
POPJ P, ;AND RETURN
;ROUTINE TO CHECK THE VALIDITY OF THE DX20 CONTROL STORE.
;NON-SKIP RETURN IF BAD.
MPCHK: MOVE T2,[D2.DR1!D2.LDR!D2.IRE!D2.PCE!D2.PCI!7] ;GET PC TO READ
XCT TAPDTO ;TELL THE DX20
MOVSI T2,(D2.DR0) ;POINT AT DIAGNOSTIC REGISTER 0
PUSHJ P,TAPDTO ;READ THE CONTENTS
PUSH P,T2 ;SAVE FOR COMPARE
MOVSI T2,(DO.XDT) ;POINT AT DRIVE TYPE REGISTER
PUSHJ P,TAPDTO ;READ THAT
POP P,T3 ;RESTORE CRAM LOCATION 7
CAME T2,T3 ;HAVE TO BE THE SAME
POPJ P, ;ERROR IF NOT
MOVSI T2,(D2.DR7) ;POINT AT DIAGNOSTIC REGISTER 7
PUSHJ P,TAPDTO ;READ IT
TRNE T2,D2.IRP ;IR PARITY ERROR ON LAST READ?
POPJ P, ;YES, THAT'S AN ERROR
MOVSI T2,(D2.DR0) ;POINT AT DIAGNOSTIC REGISTER 0 AGAIN
PUSHJ P,TAPDTO ;READ CRAM LOC 10 (PC AUTO INCR SET)
CAIE T2,D2.C10 ;MUST BE THIS VALUE
POPJ P, ;NOT, ERROR
MOVSI T2,(D2.DR7) ;POINT AT DIAGNOSTIC REGISTER 7
PUSHJ P,TAPDTO ;READ IT
TRNE T2,D2.IRP ;IR PARITY ERROR ON LAST READ?
POPJ P, ;YES, ERROR
MOVSI T2,(D2.DR0) ;POINT AT DIAGNOSTIC REGISTER 0 ONCE MORE
PUSHJ P,TAPDTO ;READ CRAM LOCATION 11
CAIE T2,D2.C11 ;MUST BE THIS VALUE
POPJ P, ;NOT, ERROR
MOVSI T2,(D2.DR7) ;POINT AT DIAGNOSTIC REGISTER 7
PUSHJ P,TAPDTO ;READ IT
TRNN T2,D2.IRP ;IR PARITY ERROR ON LAST READ?
AOS (P) ;NO, GIVE SKIP RETURN
POPJ P, ; AND RETURN
;ROUTINE TO LOAD THE DX20 MICROCODE.
;CALL: PUSHJ P,LODX20
;DOESN'T RETURN IF MICROCODE NOT PRESENT IN BOOT
;RETURN+1 IF MICROCODE LOADED
LODX20: PUSHJ P,SAVE2 ;FREE UP P1 AND P2
DMOVE P1,BTSVEC+.BTUCD+.BTTX2 ;GET POINTERS TO DX20 MICROCODE
SKIPN P1 ;MICROCODE PRESENT?
ERROR (<DX20 microcode not present>)
ADDI P2,BTSVEC+1 ;CHANGE OFFSET INTO ADDRESS, SKIP VERSION WORD
HRLI P2,(POINT 18) ;MAKE AN 18-BIT BYTE POINTER
SETZ P1, ;CURRENT ADDRESS
LDX201: MOVE T2,P1 ;GET ADDRESS
PUSHJ P,PRECR ;SET UP PC FOR CRAM
ILDB T2,P2 ;GET NEXT BYTE
CAIN P1,MAGICA ;MAGIC ADDRESS?
MOVEI T2,MAGICV ;YES
TLO T2,(D2.DR0) ;SELECT IR
PUSHJ P,WTREG ;LOAD CRAM FROM IR
CAIGE P1,3777 ;DONE ALL OF CRAM?
AOJA P1,LDX201 ;NO
MOVE T2,[D2.DR1+D2.IRE+D2.PCE] ;PC=0, SET FLAGS
PUSHJ P,WTREG ;SET PC
MOVSI T2,(D2.DR0) ;SELECT IR
PUSHJ P,RDREG ;READ IR FROM CRAM, PC=0
PUSH P,T2 ;SAVE LOCATION 0
MOVE P2,BTSVEC+.BTUCD+.BTTX2+1 ;GET OFFSET TO MICROCODE
ADDI P2,BTSVEC+2000+1 ;CHANGE OFFSET TO ADDRESS, SKIP CRAM & VRSN WD
HRLI P2,(POINT 8) ;BUILD A BYTE POINTER
SETZ P1, ;ADDRESS OF ZERO
LDX202: MOVE T2,P1 ;GET ADDRESS
PUSHJ P,PREWM ;SET UP MA TO LOAD DRAM
ILDB T1,P2 ;GET NEXT BYTE
TRO T1,11400 ;MAKE MICROINSTR. (MOVEI MEM MA+1)
PUSHJ P,XI ;EXECUTE IT
CAIGE P1,1777 ;DONE ALL?
AOJA P1,LDX202 ;NO
MOVE T2,[D2.DR1+D2.PCE+D2.MSE] ;SELECT PC, PC=0
PUSHJ P,WTREG ;SET PC
POP P,T2 ;GET SAVED LOCATION 0
TLO T2,(D2.DR0) ;SELECT IR
PUSHJ P,WTREG ;WRITE CRAM FROM IR
MOVEI T1,[ASCIZ /[TX02 microcode %/]
PUSHJ P,PRMSG ;PRINT MESSAGE
MOVE T1,BTSVEC+.BTUCD+.BTTX2+1 ;GET OFFSET TO MICROCODE
MOVE T1,BTSVEC(T1) ;GET VERSION WORD
PUSHJ P,PRVRSN ;PRINT IT
MOVEI T1,[ASCIZ / loaded on RH20 /]
PUSHJ P,PRMSG ;MORE NOISE
LDB T1,[POINT 7,TAPDTO,9] ;PICK UP DEVICE CODE
LSH T1,2 ;MAKE IT UNDERSTANDABLE
PUSHJ P,PROCT ;PRINT IT
MOVEI T1,[ASCIZ /, DX20 0/]
PUSHJ P,PRMSG ;MAKE IT LOOK LIKE USUAL BOOT MESSAGE
PUSHJ P,PRRBKT ;PRINT RIGHT BRACKET
PJRST PRCRLF ;PRINT CRLF AND RETURN
;PREWM - SETS UP THE LOAD ADDR. FOR WORKING MEMORY
;ALSO, SAVES LOC. 0 OF CRAM FOR MICROINSTR. EXECUTION
;CALL: T2/LOAD ADDR
; PUSHJ P,PREWM
;RETURN+1 ALWAYS
PREWM: PUSH P,T2 ;SAVE LOAD ADDR
MOVE T1,T2 ;GET LOAD ADDR.
ANDI T1,377 ;MAX. ADDR. 256
TRO T1,1000 ;MAKE MICROINTR. (MOVEI LOAD MA)
PUSHJ P,XI ;SET MA REGISTER
POP P,T1 ;GET LOAD ADDR AGAIN
LSH T1,-^D8 ;KEEP 2 MAEX BITS
TRO T1,400 ;MAKE MICROINTR. (MOVEI LOAD MAEX)
JRST XI ;SET MAEX BITS AND RETURN
;PRECR - SETS UP PC FOR LOADING OR VERIFYING CRAM
;CALL: MOVE T2,LOAD ADDR
; PUSHJ P,PRECR
;RETURN+1 ALWAYS
PRECR: ANDI T2,7777 ;MAKE SURE 12 BITS PC
TRO T2,D2.MSE+D2.PCE+D2.PCI ;SET BITS
TLO T2,(D2.DR1) ;SELECT PC
JRST WTREG ;WRITE PC AND RETURN
;XI - EXECUTE INSTR. IN T1
;CALL: MOVE T1/INSTR
; PUSHJ P,XI
;RETURN+1 ALWAYS
;CHANGES T2,T3,&T4
;PRESERVES T1
XI: MOVE T2,[D2.MTR+D2.SCY] ;SELECT MAINT. REG., CLEAR START & SET SINGLE CYCLE
PUSHJ P,WTREG ;STOP MICROPROCESSOR
MOVE T2,[D2.DR1+D2.PCE+D2.MSE] ;CLEAR PC AND SET BITS
PUSHJ P,WTREG ;DO IT
MOVE T2,T1 ; AND LOAD IT IN LOC. 0, ALSO
TLO T2,(D2.DR0)
PUSHJ P,WTREG ;
MOVE T2,[D2.DR1+D2.IRE+D2.PCI] ;SET D2.IRE & D2.PCI BIT
PUSHJ P,WTREG ;PC HAS 0
MOVE T2,[D2.MTR+D2.SCY+D2.SMP] ;SET SINGLE STEP & START BITS
PUSHJ P,WTREG ;GO START MICROCONTROLLER
MOVE T2,[D2.MTR+D2.SCY] ;CLEAR START BIT
JRST WTREG ;DO IT AND RETURN
;WTREG - WRITES INTERNAL OR EXTERNAL REGISTER
;CALL: T2/ REGISTER SELECT NUMBER AND CONTENTS TO WRITE
; PUSHJ P,WTREG
;RETURN+1 ALWAYS
;DESTROYS T2
WTREG: TLO T2,(D2.DLR) ;SET LR LOAD
JUMPL T2,WTREG1 ;JUMP IF INTERNAL REG.
TLO T2,<(D2.DRE)> ;SET DRAES BIT & DRIVE NUMBER
;DO.EP BIT 0 ALREADY
WTREG1: XCT TAPDTO ;WRITE IT
POPJ P, ;JUST RETURN
;RDREG - READS INTERNAL OR EXTERNAL REGISTER
;CALL: MOVE T3,REGISTER NUMBER
; PUSHJ P,RDREG
;RETURN1: ALWAYS
;T2 GETS VALUE
RDREG: SETZ T2, ;CLEAR THEM
JUMPL T2,TAPDTO ;JUMP ,IF INTERNAL
TLO T2,<(D2.DRE)> ;SET DRAES BIT & DRIVE NUMBER
;DO.EP BIT 0 ALREADY
PJRST TAPDTO ;SET PREPARATION REGISTER, READ IT AND RETURN
>; END IFN FTDX20
SUBTTL TM78 ROUTINES
IFN FTTM78,<
;FIND AND RESET CONTROLLER, FILL IN CONX/DATAX INSTRUCTIONS
T78RES: MOVEI T1,FSTICD/4 ;START AT RH 0
T78RS1: DPB T1,[POINT 7,TAPCNO,9]
DPB T1,[POINT 7,TAPDTO,9]
DPB T1,[POINT 7,TAPDTI,9]
MOVEI T2,CO.2ME ;MASSBUS ENABLE
XCT TAPCNO ;DO IT
LDB U,[POINT 3,TAPUNI,32] ;UNIT (RH) NUMBER
MOVSI T2,<(DO.XDT)>(U) ;DATAO DRIVE-TYPE REGISTER
PUSHJ P,TAPDTO ;READ DRIVE TYPE
ANDI T2,777
CAIN T2,TY.T78 ;TM78?
JRST T78RS2 ;YES
MOVEI T2,CO.XMI ;RESET THE RH TO CLEAR RAE
XCT TAPCNO
CAIGE T1,LSTICD/4 ;GONE PAST THE END?
AOJA T1,T78RS1 ;TRY NEXT RH
ERROR (<No RH20 for TM78>)
T78RS2: DPB T1,[POINT 7,T78CSO,9]
MOVEI T2,7 ;ISOLATE SLAVE NUMBER
ANDB T2,TAPUNI
ADDI T2,.T7DV0 ;GET HDWRE UNIT-REGISTER (14=DRIVE 0, 15= DRV 1, ETC)
LSH T2,^D12 ;POSITION IT TO DRIVE FIELD IN RH
HRLS U
TLO U,(T2) ;U=SLAVE-REGISTER+UNIT,,UNIT
LSH T1,2 ;CONTROLLER (RH)
ADDI T1,EPT-540 ;0 FOR RH0, 4 FOR RH1, ...
HRRM T1,T78.IC ;SAVE ICCW ADDRESS
MOVE T2,[T7.TMS+T7.DLR+T7.TMC]
TLO T2,(U) ;CLEAR TM78
XCT TAPDTO
MOVEI T1,40000
T78RS3: MOVSI T2,<(T7.TMS)>(U) ;READ STATUS REGISTER
PUSHJ P,TAPDTO
TRNN T2,T7.TMR ;WAIT FOR READY TO COME UP
SOJG T1,T78RS3
JUMPG T1,CPOPJ
ERROR (<TM78 won't start>)
;READ ROUTINE
T78RED: MOVEI T2,515410 ;CLEAR ALL ERROR BITS
XCT TAPCNO
LDB T2,[POINT 4,U,5] ;GET SLAVE NUMBER + OFFSET
SUBI T2,.T7DV0 ;CONVERT TO REAL NUMBER
TDO T2,[T7.FMT+T7.DLR+130004] ;CORE DUMP/SER/1 RECORD
TLO T2,(U) ;ADD UNIT, SLAVE
XCT TAPDTO ;TELL THE HARDWARE
MOVEI T2,LNMTBF*5 ;BYTE COUNT
HRLI T2,<(T7.BCT+T7.DLR)>(U) ;WRITE BYTE COUNT REGISTER
XCT TAPDTO ;TELL THE HARDWARE
MOVE T1,TAPBFA ;PHYSICAL ADDRESS OF TAPE BUFFER
TLO T1,600000+<LNMTBF_4> ;SET TRA+LAST AND WORD COUNT
MOVEM T1,BOOTWD ;SAVE CCW
SETZM BOOTWD+1
MOVE T1,[200000,,BOOTWD] ;JUMP TO IOWD
T78.IC: MOVEM T1,. ;STORE INITIAL JUMP (ADDR PATCHED)
MOVE T2,[716600,,177700!T7.FRD]
TLO T2,(U) ;ADD THE UNIT NUMBER
XCT TAPDTO ;START THE READ
PUSHJ P,TWAIT ;WAIT FOR COMPLETION
T78CSO: CONSO .-.,CI.XDN
MOVSI T2,<(T7.ICD)>(U) ;READ INTERRUPT CODE
PUSHJ P,TAPDTO
ANDI T2,37 ;JUST THE CODE
CAIE T2,.T7DCD
CAIN T2,.T7SCD ;OK?
JRST T78RD4 ;YES
CAIE T2,.T7EOF
JRST T78RD5 ;ERROR
SETOM EOF ;EOF
T78RD4: AOS (P)
T78RD5: MOVEI T2,5410
XCT TAPCNO ;CLEAR DONE, ERRORS
POPJ P, ;AND RETURN
;TM78 REWIND ROUTINE
T78REW: MOVEI T2,T7.FRW ;FUNCTION
PJRST T78NDO ;DO IT AND RETURN WHEN STARTED
;SKIP RECORD
T78SKR: MOVE T2,[400+T7.FSR
400+T7.FBR](T4) ;FUNCTION
PUSHJ P,T78NDO ;DO IT
MOVSI T2,<(T7.NIC)>(U) ;READ THE STATUS REGISTER
PUSHJ P,TAPDTO
ANDI T2,37 ;JUST THE CODE
CAIN T2,.T7EOF ;EOF?
SETOM EOF ;YES
POPJ P,
;WAIT FOR REWIND TO COMPLETE
T78CHK: MOVEI T2,T7.FSN ;SENSE
PUSHJ P,T78NDO
;THIS IS AN INCREDIBLE *****CROCK****** (CATCH 78) BUT:
; THE ONLY WAY YOU CAN TELL IF A DRIVE IS REWINDING IS TO DO A SENSE.
; BUT YOU CAN'T DO A SENSE IF THE DRIVE IS REWINDING - THE CONTROL
; JUST STACKS IT SO IF THE SENSE WE JUST DID TIMES OUT THE DRIVE MUST
; BE REWINDING!
JUMPE T1,T78CHK
POPJ P,
;ROUTINE TO DO A NON-DATA OPERATION TO A TU78
;ENTER T2=FUNCTION, U=DRIVE+UNIT,,UNIT
T78NDO: HLL T2,U ;SLAVE REGISTER + RH UNIT NUMBER
TLO T2,(T7.DLR) ;TELL THE HARDWARE TO WRITE THE REGISTER
XCT TAPDTO ;DO THE FUNCTION
MOVEI T1,20000 ;HOW LONG TO WAIT FOR COMPLETION
T78ND1: MOVSI T2,(T7.ATR)
PUSHJ P,TAPDTO ;READ THE ATTENTION SUMMARY REGISTER
TRNN T2,377 ;ATTENTION UP?
SOJG T1,T78ND1
JUMPE T1,CPOPJ ;GO AWAY IF TIMED OUT
MOVE T2,[T7.ATR!T7.DLR+377] ;FINISHED. CLEAR THE ATTENTION
XCT TAPDTO
POPJ P,
>; END IFN FTTM78
SUBTTL MAGTAPE DRIVER DATA STORAGE AND LITERALS
TAPBUF: BLOCK LNMTBF ;THE BUFFER FOR BACKUP'ING INTO
TAPBFA: BLOCK 1 ;PHYSICAL ADDRESS OF ABOVE
EOF: BLOCK 1 ;END OF FILE FLAG
SAVDEV: BLOCK 1 ;SAVED DEV
IFN FTDX10,<
CHPRG: BLOCK 4 ;PLACE FOR CHANNEL PROGRAM
CHPRGA: BLOCK 1 ;PHYSICAL ADDRESS OF ABOVE
CHSNS: BLOCK 12 ;PLACE FOR EXTENDED STATUS
CHSNSA: BLOCK 1 ;PHYSICAL ADDRESS OF ABOVE
TX.MOD: BLOCK 1 ;MODE WORD
>; END IFN FTDX10
TAPLIT: LIT
TAPEND==.-1 ;THE END OF THE MAGTAPE CODE
>; END IFN FTTAPE
SUBTTL THE END
BTSEND: END LOADER