Trailing-Edge
-
PDP-10 Archives
-
bb-bt99l-bb
-
comdev.x18
There is 1 other file named comdev.x18 in the archive. Click here to see a list.
TITLE COMDEV - MONITOR DEVICE DEPENDENT CODE, SYMBOLS, AND DATA - V1424
SUBTTL PART 6 COMDEV.MAC - T. HASTINGS/PH/TWE/DAL/JBS/EGF 8 JULY 86
SEARCH F,S
IFN FTNET,<
SEARCH NETPRM
>;END OF FTNET
IFN M.KL10,<
SEARCH DTEPRM
>;END IFN M.KL10
$RELOC
$LOW
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
.CPYRT<1973,1986>
;COPYRIGHT (C) 1973,1974,1975,1976,1977,1978,1979,1980,1982,1984,1986
;BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
;ALL RIGHTS RESERVED.
;
XP VCOMDV,1424
;PUT VERSION NUMBER IN GLOB AND LOADER STORAGE MAP
;SEE DATMAN FOR A LISTING OF S.MAC AND F.MAC
SUBTTL TABLE OF CONTENTS
; TABLE OF CONTENTS FOR COMDEV
;
;
; SECTION PAGE
; 1. TABLE OF CONTENTS......................................... 2
; 2. CONVERT MONGEN SYMBOLS.................................... 5
; 3. DEFAULT SYMBOLS........................................... 9
; 4. COMPUTE SPECIAL SYMBOLS................................... 11
; 5. TERMINAL DATA BASE........................................ 12
; 6. TERMINAL DATA BASE
; 6.1 TERMINAL CHARACTERISTICS DEFINITION............... 24
; 6.2 POINTERS FOR CURSOR SEQUENCES..................... 25
; 6.3 CURSOR CONTROL SEQUENCES.......................... 26
; 7. DTESER DATA BASE GENERATION............................... 27
; 8. NETWORK SYMBOLS FOR NON-NETWORK SYSTEMS................... 28
; 9. MAGTAPE DATA BASE FOR TAPSER.............................. 31
; 10. DECTAPE DATA BASE FOR DTASER.............................. 39
; 11. INTERRUPT HEAD FOR DT'X................................... 40
; 12. MACRO TO GENERATE UNIT RECORD EQUIPMENT DDBS.............. 46
; 13. CARD READER DDB DEFINITIONS............................... 47
; 14. CARD READER TRANSLATION TABLES............................ 50
; 15. CARD PUNCH DDB DEFINITIONS................................ 52
; 16. DK10 BITS AND DDB DEFINITIONS............................. 54
; 17. DEFINITIONS FOR DISPLAY AND LIGHT PEN..................... 57
; 18. LINE PRINTER DDB DEFINITIONS.............................. 59
; 19. PLOTTER DDB DEFINITIONS................................... 65
; 20. DEFINITIONS FOR PAPER TAPE AND PTY'S...................... 66
; 21. PAPER TAPE READER DDB DEFINITIONS......................... 66
; 22. PAPER TAPE PUNCH DDB DEFINITIONS.......................... 66
; 23. ROUTINES COMMON TO PDP11 COMM FRONT-END'S ON DL10'S....... 69
; 24. LOCATE & WHERE COMMAND/UUOS............................... 76
REPEAT 0, <
;THE COMDEV SUBPROGRAM CONSISTS OF 6 FILES ASSEMBLED TOGETHER AS ONE SUBPROGRAM
1. F.MAC -- FEATURE TESTS (OUTPUT OF## MONGEN).
2. S.MAC - THE USUAL SYSTEM SYMBOL DEFINITIONS## ASSEMBLED WITH
EVERY MONITOR SUBPROGRAM
3. HDWCNF.MAC -- HARDWARE CONFIGURATION
4. TTYCNF.MAC -- TERMINAL CONFIGURATION
5. REMCNF.MAC -- REMOTE CONFIGURATION
6. COMMON.MAC - THE REST Of THIS PROGRAM WHICH IS THE SAME SOURCE FOR
ALL CONFIGURATIONS. HOWEVER, THE ASSEMBLIES ARE CONDITIONED BY
SYMBOLS AND MACROS DEFINED IN 2.
THE FOLLOWING SYMBOLS AND TABLES ARE GENERATED BELOW:
A. CONVERSION SYMBOLS FROM NEW MONGEN(M.XXXX) To OLD SYMBOLS(XXXXX.N)
B. TTY AND REMOTE CONVERSION SYMBOLS
C. MONGEN DEFAULT SYMBOLS
D. TTY DATA BASE
E. REMOTE STATION DATA BASE
F. ALL OTHER DEVICe SPECIFIC CODE AND DATA BASES: (ONLY CODE WHICH CHANGES DEPENDING ON THE CONFIGURATION
SHOULD BE IN COMDEV). THE LIBARARY SEARCH FEATURE
DETERMINES WHETHER THE CONFIGURATION INDEPENDENT CODE
FOR A PARTICULAR DEVICe IS LOADED OR NOT).
SHOULD BE HERE.
THE ONLY DEVICe SPECIFIC STUFF IN COMMON IS THE
SYMBOL DEFINITIONs WHICH INCLUDE THE PI ASSIGNMENT VALUE.
LEVEL D DISK SERVICE PARAMETERS:
ALL SYMBOLS AND LOCATIONS ARE IN A SEPARATE FILE CALLED
COMMOD.MAC WHICH IS ALSO ASSEMBLED WITH S AND CONFIg (BUT NOT WITH FEATURS FILES).
THE SEPARATE FILE IS FOR TWO REASONS:
1. ANTICIPATING MULTIPROCESSING SYSTEMS WHICH SHARE DISKS AND 1 16K MEMORY
(THE DATA MUST BE IN THE COMMON MEMORY)
2. ELIMINATE THE NEED To ASSEMBLE COMMOD IF NOT A DISK SYSTEM
(COMMOD.MAC TAKES LOTS Of CORE FOR ITS COMPLICATED MACROS)
COMMUNICATIONS SOFTWARE
>
IFN FTKL10,<
;NOTE:
; IF ANY CHANGES ARE MADE TO DTEPRM THAT DTESER MUST HAVE, UPDATE
; THE FOLLOWING SYMBOL TO THE VERSION OF DTEPRM THAT MUST BE USED
PRMMIN==16
; THIS WAY, ASSEMBLING THIS MODULE WITH WRONG VERSION OF DTEPRM FOR SOME REASON
; (LIKE FORGETTING TO ASSEMBLE IT) WILL CAUSE ASSEMBLY TO TERMINATE
; THIS SCHEME DOES NOT CAUSE EXTRA EDITING, SINCE ONLY FILES
; WHICH NEED THE CHANGES NEED PRMMIN TO BE UPDATED. MODULES
; THAT DO NOT NEED A NEW VERSION OF DTEPRM NEED NOT DEMAND IT.
IFL VDTPRM-PRMMIN,<PRINTX ?PLEASE USE LATEST VERSION OF DTEPRM
PASS2
END>>
SUBTTL CONVERT MONGEN SYMBOLS
REPEAT 0,<
;THIS SECTION CONVERTS NEW MONGEN SYMBOLS TO OLD MONGEN SYMBOLS
;SO THAT THE REST OF COMMON AND MONITOR CAN STILL USE THE OLD
;SYMBOLS. THIS WAS DONE RATHER THAN CONVERTING ALL OF THE
;MONITOR TO NEW SYMBOLS FOR TWO REASONS:
; 1. IT IS EASIER AND FASTER AND LESS LIKELY TO INTRODUCE BUGS, AND
; 2. IT ALLOWS CUSTOMERS TO USE OLD MONGEN WITH A MINIMUM
;OF TROUBLE: ONLY A FEW EXTRA SYMBOLS MUST BE DEFINED.
;THE MONITOR WILL PROBABLY BE CONVERTED TO THE NEW MONGEN SYMBOLS
;AFTER THE 5.04 RELEASE. THE ORDER HERE PARALLELS THE OLD
;MONGEN ORDER.
>
XP SYS40N,0 ;NEW MONGEN MAKES SWAPPING SYSTEMS ONLY
XP SYS50N,1
XP DSKN,1
XP LOGINN,1
XP APRSN,M.C0SN ;APR SERIAL NUMBER (REALLY PROCESSOR 0)
XP APR0SN,M.C0SN ;PROCESSOR 0 SERIAL NUMBER
XP APR1SN,M.C1SN ;PROCESSOR 1 SERIAL NUMBER
XP CP0P6N,0 ;PROCESSOR 0 IS NOT A PDP 6
XP CP1P6N,0 ;PROCESSOR 1 IS NOT A PDP 6
XP CP0KIN,M.KI10 ;PROCESSOR 0 MAY BE A KI10
XP CP1KIN,M.KI10 ;PROCESSOR 1 MAY BE A KI10
XP CPUN,M.CPU ;NUMBER OF PROCESSORS
XP LEVDN,1 ;NEW MONGEN MAKES ONLY LEVEL D DISK SERVICE
XP LEVCN,0
XP CHNN,M.CHN ;NUMBER OF DATA CHANNELS FOR DISKS
XP RD10N,M.RC10
XP RP10N,M.RP10
XP RH10NS,M.RH1S
XP RH10NP,M.RHP4
XP RN10N,M.RP20
XP RA10N,0 ;NO MDF
DEFINE SYSDEV,<
SIXBIT /DSK/
>
XP JOBN,M.JOB+1
XP PDP10N,M.KI10!M.KL10N!M.KS10
XP KT10AN,MD.2RR
XP SEGN,MD.SEG
IFG KT10AN,<XP SEGN,SEGN+JOBN> ;NO. OF SEGS=NO. OF JOBS+NO. HISEGS
XP DDTN,MD.DDT
XP EDITN,0
XP PTRN,M.PTR
XP PTPN,M.PTP
XP PLTN,M.PLT
XP LPTN,M.LPT
IFNDEF M.DLP,<M.DLP==:0>
IFNDEF M.DCR,<M.DCR==:0>
XP DLPTN,M.DLP
XP DCDRN,M.DCR
XP MOVIEN,MD.MOV
XP CDRN,M.CDR
XP CR10N,MD.C10
XP CDPN,M.CDP
IFN FTXTC,<
IFE M.XTC,<
XP M.XTL,0>
XP XTCN,M.XTC
>
IFE FTXTC,<
IFN M.XTC,<
PRINTX ?NO DA28 SUPPORT WITH FTXTC=0
PRINTX ?PROCEEDING ASSUMING NO DA28
XP M.XTC,0
>
XP M.XTL,0
XP XTCN,0
>
XP DISN,M.DIS
XP PENN,M.DIS
XP T340N,M.340
XP TVP10N,M.VP10
XP T30N,0 ;NO TYPE 30
XP VBCN,M.VBXC
DEFINE TDMAC(X),<
XP DT'X'N,M.DT'X
M.DTXN==M.DTXN+M.DT'X
>
ZZ=="A"
M.DTXN==0
REPEAT M.TD10,<
TDMAC(\"ZZ)
ZZ==ZZ+1
>
IFN FTKS10,<
DEFINE RX2MAC(X),<
XP RX'X'N,M.RX'X
M.RXXN==M.RXXN+M.RX'X
>
ZZ=="A"
M.RXXN==0
REPEAT M.RX20,<
RX2MAC(\"ZZ)
ZZ==ZZ+1
>
>;End FTKS10
IFNDEF M.TM10,<XP M.TM10,0>
IFNDEF M.TC10,<XP M.TC10,0>
IFNDEF M.TX01,<XP M.TX01,0>
IFNDEF M.DX20,<XP M.DX20,0>
XP TAPN,M.TM10+M.TC10+M.TX01+M.TM02+M.DX20+M.TM78
XP PTYN,M.PTY
XP SYSCN,M.SYSC
XP LOKN,M.LOK
XP CMNN,M.MGC
XP RTTRPN,M.RTD
XP HPQN,M.HPQ
IFNDEF M.HRSN,<XP M.HRSN,77>
IFNDEF M.LATN,<XP M.LATN,0>
IFNDEF TTXTRA,<XP TTXTRA,0>
IF2,<
IFN M.KL10,<
DEFINE TTXTRD(N),<TTXTRA==TTXTRA+M'N'DTEN>
ZZ==0
REPEAT CPUN,<
TTXTRD(\ZZ)
ZZ==ZZ+1>
>> ;DEFINE ENOUGH SLAVE DDBS FOR ALL DTES
XP TTD28N,M.XTL
IFG M.XTL,<XP M.TLTL,M.TLTL+M.XTL>
IFNDEF M.TTDN,<M.TTDN==:0>
XP M.TLTL,M.TLTL+M.TTDN ;REDEFINE FOR ANY RSX-20F LINES
IFN M.KS10,<
XP KLILIN,M.TLTL+M.RMCR ;LINE NO. FOR KS10 KLINIK
XP M.TLTL,M.TLTL+1 ;ADD ONE FOR KLINIK
>
XP CTYLIN,M.TLTL+M.RMCR+M.CPU
XP FRCLIN,CTYLIN-M.CPU
DEFINE OPRL(LINE),<
IFIDN <LINE> <CTY>,<SIXBIT /CTY/>
IFDIF <LINE> <CTY>,<SIXBIT /TTY'LINE/>
>
DEFINE DSASOC,<
XLIST
DEFINE L(M,N,P),<
IFIDN <M> <CTY>,<
ZZBEG==CTYLIN
ZZDATA==CTYLIN
>
IFDIF <M> <CTY>,<
ZZBEG==M
ZZDATA==M
>
IFB <P>,<
ZZEND==ZZBEG
ZZLINE==N
>
IFNB <P>,<
ZZEND==N
ZZLINE==P
>
REPEAT ZZEND-ZZBEG+1,<
GENLIN (\ZZDATA,ZZLINE)
ZZDATA==ZZDATA+1
ZZLINE==ZZLINE+1
>> ;END REPEAT AND DEFINITION OF L
LIST
> ;END DEFINITION OF DSASOC
SUBTTL DEFAULT SYMBOLS
;THE FOLLOWING STANDARD SYMBOLS CAN BE SUPERSEDED BY A CUSTOMER HAVING
; PREVIOUSLY DEFINED THEM ON THE HDWGEN.MAC FILE USING THE MONGEN PROGRAM....
;**********************************************************************
;ADD NEW SYMBOLS AT END SO EASY TO UPDATE MONGEN APPENDIX *
;**********************************************************************
IFNDEF XPANDN,<XP XPANDN,0> ;FORCE NO EXPANSION OF MACROS
; UNLESS XPANDN IS DEFINED NON-ZERO WITH MONGEN
;SIZE OF MAGTAPE RECORDS (DATA WORDS IN BUFFER)
IFNDEF MTSIZ, <XP MTSIZ,^D128> ;STANDARD == 128 WORDS PER BUFFER
;SIZE OF LPT BUFFER (NUMBER OF DATA WORDS+2)
IFNDEF LPTSIZ, <XP LPTSIZ,^D27+2> ;STANDARD == 27 WORDS PER LPT BUFFER (132 COL. PRINTER)
IFNDEF FLCDEF,<XP FLCDEF,1> ;FILLER CLASS CODE TO USE IF NOT SPECIFIED
;FOR A TTY LINE
IFNDEF TTYALT,<XP TTYALT,0> ;DEFAULT SETTING OF TTY ALTMODE
; IS NO CONVERSION OF ASCII CODES 175 AND 176 TO 33
IFNDEF TTYWID,<XP TTYWID,^D72> ;DEFAULT SETTING OF TTY WIDTH IS 72.
IFNDEF TTYRMT,<XP TTYRMT,1> ;DEFAULT SETTING OF TTY REMOTE IS ON
IFNDEF TTYLCT,<XP TTYLCT,1> ;DEFAULT SETTING OF TTY LC IS OFF
IFNDEF CTYLCT,<XP CTYLCT,TTYLCT> ;MATCH DEFAULT SETTING OF CTY LC WITH TTY LC
IFNDEF PTYRMT,<XP PTYRMT,0> ;PTYS ARE NORMALLY LOCAL
IFNDEF PTYLCT,<XP PTYLCT,0> ;PTYS NORMALLY DON'T SET BITS
XP CTYLTB,<FLCDEF*TTVFLC+CTYLCT*TTVLCT+0*TTVRMT> ;CTY 'LINTAB' BITS
XP TTYLTB,<FLCDEF*TTVFLC+TTYLCT*TTVLCT+TTYRMT*TTVRMT> ;TTY 'LINTAB' BITS
XP PTYLTB,<0*TTVFLC+PTYLCT*TTVLCT+PTYRMT*TTVRMT> ;PTY 'LINTAB' BITS
;PARAMETERS THAT CONTROL THE AUTO-DISCONNECT FEATURE.
ND IDLSEC,^D90 ;ANY TERMINAL IDLE THIS LONG GETS DISCONNECTED
ND M.AIDL,IDLSEC ;ANF-10 DEFAULT IDLE TIME
ND M.NIDL,IDLSEC ;NRT/CTERM DEFAULT IDLE TIME
ND M.DIDL,IDLSEC ;DATASET MAXIMUM IDLE TIME
ND M.LIDL,IDLSEC ;LAT TERMINAL IDLE-MAX
;NOTE--IN ORDER TO RESERVE PI-CHANNELS FOR
;NON-STANDARD USAGE, FOR EACH CHANNEL (SAY N)
;DEFINE SYMBOL UNIQN==1 VIA MONGEN. FOR
;EXAMPLE, TO RESERVE CHANNEL 4, DEFINE
;UNIQ4==1.
;IF IT IS DESIRED TO LEAVE A CHANNEL FREE FOR RTTRP JOB TO USE
;THEN THE APPROPRIATE SYMBOL "RTCH'N" SHOULD BE DEFINED AS 1.
;FOR EXAMPLE:
;IF CHANNEL 2 IS TO FREE FOR RTTRP USE THE DEFINE RTCH2==1 IN MONGEN
IFNDEF MTELOG,<XP MTELOG,-1> ;ZERO TO LOG ALL RECOVERED ERRORS
;NON-ZERO TO LOG ERRORS THAT REQ'D MORE THAN ONE RETRY
IFNDEF MTDAEM,<XP MTDAEM,10> ;NUMBER OF TIMES PER REEL TO CALL DAEMON
; FOR MAGTAPE ERROR REPORTS.
IFN FTTLAB,<
IFNDEF MTDLTP,<XP MTDLTP,LT.BLP> ;DEFAULT LABEL TYPE
>
IFN FTKL10,<
DEFINE DTEDEF(X,Y)<
IFE <Y-1>,<M.AT'X'Y==M'X'TTDN> ;ASYNCHRONOUS TERMINALS ON -20F FRONT END
IFN <Y-1>,<M.AT'X'Y==0>
NDL M.FD'X'Y,2 ;NUMBER OF FRONT END DEVICES ON FRONT END
; ONE FOR FILE XFER, ONE FOR DDT11
>
ZZ==0
REPEAT M.CPU,<
ZZZ==1
REPEAT 4,<
DTEDEF (\ZZ,\ZZZ)
ZZZ==ZZZ+1
>
ZZ==ZZ+1
>
> ;END FTKL10
;ADD NEW MONGEN SYMBOLS HERE
SUBTTL COMPUTE SPECIAL SYMBOLS
;PERFORM TRANSLATION FROM HARDWARE TO SOFTWARE DESIGNATION
; FOR ALL DISK SYMBOLS
IFN DSKN,<
FHDN==RD10N
DPCN==RP10N
MDFN==RA10N
FSDN==RH10NS
RPXN==RH10NP
RNXN==RN10N
>
IFE DSKN, <
FHDN==0
DPCN==0
MDFN==0
FSDN==0
RPXN==0
RNXN==0
>
IFN LEVDN,<
ALLDSK=FHDN+DPCN+MDFN+FSDN+RPXN+RNXN ;ALLDSK = THE TOTAL # OF DSK KONTROLLERS IN THE SYSTEM
; IF YOU ADD ANOTHER KONTROLLER TYPE YOU MUST
; INCLUDE THE # OF KONTROLLERS OF THAT TYPE HERE
>
;DEFINE THE PARAMETERS WHICH CONTROL THE TYPE OF SYSTEM
XP FTDISK,-DSKN ;10/40D OR 10/50S
XP FTSWAP,-SYS50N ;10/50S
XP FTLOGIN,-DSKN ;PUT FTLOGIN IN SO LOADER WILL COMPLAIN
; IF DIFFERENT IN OTHER FILES
SUBTTL TERMINAL DATA BASE
;THE FOLLOWING SECTION DESCRIBES THE TELETYPE LINES,GLOBALS, AND
;DATA STRUCTURES OF THE MONITOR.
;THE FOLLOWING ARE SUPPLIED BY MONGEN
;M.DC10 =NUMBER OF DC10'S
;M.DC68 =NUMBER OF DC68'S
;M.DC76 =NUMBER OF DC76'S
;M.D7KN =NUMBER OF LINES ON DC76 K
;M.68LK =NUMBER OF LINES ON DC68 K
;M.TTGK =NUMBER OF LINES ON DC10 K
;M.DSGK =NUMBER OF DC10E'S ON DC10 K
;M.TLTL =TOTAL LOCAL TTY LINES
IFDEF M.LCST,< ;#WORDS FOR CUSTOMERS IN LDB
IFG M.LCST,<
LDBCST==:LDBLEN##-M.LCST ;DEFINE START OF CUSTOMER AREA
>
>
IFNDEF M.LCST,<
M.LCST==:0
>
;DEFINE SYMBOLS FOR CPUS OTHER THAN 0 UNTIL WE GET MONGEN WORKING
DEFINE CXDEF(SYM)<
IRP SYM,<
IFNDEF M0'SYM,<M0'SYM==M.'SYM>
IFNDEF M1'SYM,<M1'SYM==0>
IFNDEF M2'SYM,<M2'SYM==0>
IFNDEF M3'SYM,<M3'SYM==0>
IFNDEF M4'SYM,<M4'SYM==0>
IFNDEF M5'SYM,<M5'SYM==0>
>>
CXDEF(<TTG0,TTG1,68L0,68L1,D70N,D71N,D72N,D73N>)
CXDEF(<D74N,D75N,D76N,D77N,DZNL>)
;THE FOLLOWING MAY BE SUPPLIED FOR LINTAB, WHERE THE LINE NUMBER
; IS CONCATENATED ON THE END (0 IN THIS CASE):
;DSD0 MEANS LINE 0 IS A DATASET LINE
;TAB0 MEANS LINE 0 HAS HARDWARE TABS
;RMT0 MEANS LINE 0 IS A REMOTE LINE, BUT NOT A DATASET.
;HLF0 MEANS LINE 0 IS HALF-DUPLEX (XMTED CHARS WILL BE RCVD)
;ALSO A MACRO IS DEFINED FOR DC10E-CONTROLLED DATASETS, WHICH
;DEFINES THE CORRESPONDENCE BETWEEN THE DC10E CONTROL LINE NUMBER
;(WHICH CONTROLS THE DATASET ENABLES, RINGING, ETC) AND THE
;CORRESPONDING DC10B LINE NUMBER (I.E., TTYN AS THE SYSTEM SEES
;IT). FOR EXAMPLE, FOR A SYSTEM WITH TWO DATASETS CONTROLLED
;BY DC10E LINES 27 AND 26, AND WITH DATA ON TTY17 AND TTY16 RESPECTIVELY,
; DEFINE DSASOC <
; GENLIN 27,17
; GENLIN 26,16
; >
;THE FOLLOWING ARE USED IN THE PREDEFINED LINE TABLES
DEFINE LINMAC (BITS) <
IRP BITS,<
LINMC1 (BITS,\LIN)
>
LIN==LIN+1
>
DEFINE LINMC1 (B,N) <
B'N==:1
>
;THE FOLLOWING GLOBALS ARE USED IN VARIOUS ROUTINES SUCH AS
;ONCE,SCNSER,DLSINT,BTHINT,ETC.
XP SCNN,JOBN+TTXTRA ;NUMBER OF TTY DDBS TO BE BUILT
XP HGHLIN,M.TLTL ;HIGHEST LINE ON SCANNERS, BEFORE TCONLN
XP TCONLN,CTYLIN ;LINE NUMBER FOR CTY (NOT ON SCANNER)
XP DL0MXD,<10*M.TTG0>-1 ;HIGHEST DC10 LINE WHICH IS REAL DATA
XP DL0MXL,<10*M.DSG0>+DL0MXD ;HIGHEST LINE ON DC10 (MAY BE DC10E)
XP DL0OFS,0 ;OFFSET FROM LINTAB TO HARDWARE
XP DL1MXD,<10*M.TTG1>-1 ;NUMBER OF DATA LINES ON DC10 #1
XP DL1MXL,<10*M.DSG1>+DL1MXD ;HIGHEST LINE ON DC10 #1
XP DL1OFS,<10*M.TTG0> ;ADD TO GO FROM HARDWARE TO LINTAB
XP CC0OFS,DL1OFS+<M.TTG1*10> ;OFFSET TO GET TO CCI0
XP CC1OFS,CC0OFS+M.68L0 ;OFFSET TO GET TO CCI1
XP D70OFS,CC1OFS+M.68L1 ;OFFSET FOR FIRST DC76
XP D71OFS,D70OFS+M.D70N ;OFFSET FOR SECOND DC76
XP D72OFS,D71OFS+M.D71N ;OFFSET FOR THIRD DC76
XP D73OFS,D72OFS+M.D72N ;OFFSET FOR FOURTH DC76
XP D74OFS,D73OFS+M.D73N ;OFFSET FOR FIFTH DC76
XP D75OFS,D74OFS+M.D74N ;OFFSET FOR SIXTH DC76
XP D76OFS,D75OFS+M.D75N ;OFFSET FOR SEVENTH DC76
XP D77OFS,D76OFS+M.D76N ;OFFSET FOR EIGHT DC76
XP DZOFS,D77OFS+M.D77N ;OFFSET FOR DZ11 TTY'S
XP TTDLAL,DZOFS+M.DZNL ;OFFSET FOR ALL TTD (RSX-20F) LINES
XP NETOFS,TTDLAL+M.TTDN ;OFFSET TO NETWORK TTY'S
XP D28OFS,NETOFS+M.RMCR ;OFFSET FOR DA28 LINES
XP DSCOF0,DL0MXD+1 ;NUMBER TO SUBTRACT FROM LINE # TO
; GET DCSTAB INDEX FOR DC10#0
XP DSCOF1,DL1MXD+1-<DL0MXL-DL0MXD> ;DITTO FOR DC10 #1
IFG <PTYN-^D512>,<PRINTX ?512 OR MORE PTY'S EXCEEDS FIELD OF DDB>
XP TTPLEN,TCONLN+PTYN+1 ;LENGTH OF TRANSLATOR TABLE
;INCLUDES ALL SCNANNERS, CTY, AND PTY'S
IFG <TTPLEN-^D512>,<PRINTX ?MORE THAN 512. TTYS+PTYS EXCEEDS FIELD OF DDB>
XP PTYOFS,TCONLN+1 ;OFFSET FOR PTY-DRIVEN TTY'S
XP MTTYLN,-TTPLEN
XP MLTTYL,-SCNN
IFN M.DZNL,<
EXTERN DZINT ;LOAD SERVICE ROUTINE
;TABLE OF OUTPUT CHARACTERS FOR EACH DZ11 LINE
DZCHTB::BLOCK M.DZNL
;TABLE OF DATASET STATUS FOR EACH DZ11
DZDSTB::BLOCK <<M.DZNL+7>/10>
;TABLE OF LINE STATUS FOR AUTOBAUD FRONT END
DZTTQN::EXP 0
DZMSTS::BLOCK M.DZNL
DEFINE X (N) <
DZ'N'VA::EXP 0 ;JSR HERE ON INTERRUPT
EXP 0,IC.UOU,.+1
EXCH T1,DZ'N'VA ;GET PC WE CAME FROM
MOVEM T1,SCNCHL## ;SAVE IT FOR SCNSAV
MOVE T1,DZ'N'VA+1 ;SECOND WORD
MOVEM T1,SCNCHL##+1
MOVE T1,DZ'N'VA ;RESTORE T1
JSR SCNSAV## ;SAVE REGISTERS
MOVE P1,[DZ11BA+<N*10>]
JRST DZVECA##
DZ'N'VB::EXP 0 ;JSR HERE ON INTERRUPT
EXP 0,IC.UOU,.+1
EXCH T1,DZ'N'VB ;GET PC WE CAME FROM
MOVEM T1,SCNCHL## ;SAVE IT FOR SCNSAV
MOVE T1,DZ'N'VB+1 ;SECOND WORD
MOVEM T1,SCNCHL##+1
MOVE T1,DZ'N'VB ;RESTORE REGISTER
JSR SCNSAV## ;SAVE REGISTERS
MOVE P1,[DZ11BA+<N*10>]
JRST DZVECB##
>
Z=0
REPEAT <<M.DZNL+7>/10>,<
X \Z
Z=Z+1
>
>;IFN M.DZNL
;DEFINE ALL DL10 SYMBOLS
DLX.CK(0) ;MACRO DEFINED IN S.MAC
IFN FTDAS78!DLX.78,<
IFE FTDAS78,<
PRINTX ?DEFINING A DAS78 REQUIRES FTDAS78 TO BE ON
PDP11N==PDP11N-DLX.78
DLX.78=0 ;ACTUAL NUMBER
>> ;END OF IFN FTDAS78!DLX.78
IFN FTDN60!DLX.60,<
IFE FTDN60,<
PRINTX ?DEFINING A DN60 REQUIRES FTDN60 TO BE ON
PDP11N==PDP11N-DLX.60
DLX.60=0 ;ACTUAL NUMBER
>> ;END OF IFN FTDN60!DLX.60
IFNDEF M.DN6S,<M.DN6S==0>
;SCANNER ENTRY POINTS AND BIT DEFINITIONS
EXTERN SCNSER
;TELETYPE LINE CHARACTERISTICS (FORMER LH OF LINTAB)
;USED BY SCNSER
XP TTVRMT,1 ;REMOTE LINE
XP TTVHLF,2 ;HALF DUPLEX LINE (DC10C OR TWX)
XP TTVINI,4 ;RUN INITIAL CUSP
XP TTVDSD,10 ;DATASET DATA LINE
XP TTVDIS,20 ;2741 TERMINALS ON A DC-10 INTERFACE
XP TTVNFC,40 ;NO FREE CRLF AT 72 COLUMNS
XP TTVFRM,100 ;FORM FEED IN HARDWARE
XP TTVLCP,200 ;LOCAL COPY, BUT NOT HALF DUPLEX
XP TTVTAB,400 ;TAB HARDWARE (8 COLUMNS PER)
XP TTVLCT,1000 ;LOWER CASE TRANSLATE TO UPPER
XP TTVSLV,2000 ;SLAVE TTY
XP TTVFLC,4000 ;TWO BITS OF FILLER CLASS CODE
DEFINE CALLM(NAME,LINE),<
NDL NAME'LINE,1
>
DEFINE TTYMAC(TYPE),<
XLIST
DEFINE L(A,B),<
IFB <B>,<IFE <SIXBIT/A/>-<SIXBIT/CTY/>,<
ZZBEG==FRCLIN+1
ZZEND==TCONLN>
IFN <SIXBIT/A/>-<SIXBIT/CTY/>,<ZZBEG==<ZZEND==A>>
>
IFNB <B>,<
ZZBEG==A
ZZEND==B
>
ZZLINE==ZZBEG
IFGE ZZEND-FRCLIN,<ZZEND==FRCLIN-1> ;DON'T NEED TO INCLUDE PTYS
IFG ZZEND-ZZBEG+1,<
REPEAT ZZEND-ZZBEG+1,<
CALLM (TYPE,\ZZLINE)
ZZLINE==ZZLINE+1
>>> ;END IFG, REPEAT AND DEFINITION OF L
MAC'TYPE
LIST
> ;END DEFINITION OF TTYMAC
.XCREF
TTYMAC DSD
.CREF
;NOW DEFINE THE LINE TABLE FOR STORING LDB ADDRESSES.
$HIGH
LINTAB::
REPEAT TTPLEN,<
EXP 0
XLIST>
LIST
$LOW
;NOW THE DATASET CONTROLLER INFO FOR ANY DC10E'S
;CONSTRUCT THE DATASET CONTROLLER TABLE
DEFINE GENLIN(CON,DATA)<
ZZ==0
IFLE <CON-DL0MXD>,<ZZ==1>
IFG <CON-DL0MXL>,<ZZ==1>
IFG <DATA-DL0MXD>,<ZZ==1> ;CHECK RANGE OF ARGUMENT
IFN ZZ,<PRINTX ? SPECIFICATION ERROR - DSCTAB>
IFE ZZ,<
DSA'CON==1
DSB'CON==DATA
>
>
IFG M.DSG0,<
DSASOC
MACCR0 ;INVOKE THE MACRO
>
DSCTAB::.INDEX==DL0MXD+1
DEFINE GENLIN(N)<
ZZ==0
IFDEF DSA'N,<IFN DSA'N,<ZZ==DL0OFS+DSB'N>>
EXP ZZ ;DATA SET N
.INDEX==.INDEX+1
>
REPEAT <DL0MXL-DL0MXD>,<GENLIN(\.INDEX)>
IFDEF MACCR1,< ;ONLY IF 2 DC10'S
DEFINE GENLIN(CON,DATA)<
ZZ==0
IFLE <CON-DL1MXD>,<ZZ==1>
IFG <CON-DL1MXL>,<ZZ==1>
IFG <DATA-DL1MXD>,<ZZ==1> ;CHECK RANGE OF ARGUMENT
IFN ZZ,<PRINTX ? SPECIFICATION ERROR - DSCTAB>
IFE ZZ,<
DSA'CON==1
DSB'CON==DATA
>
>
DSASOC
MACCR1 ;INVOKE THE MACRO
.INDEX==DL1MXD+1
DEFINE GENLIN(N)<
ZZ==0
IFDEF DSA'N,<IFN DSA'N,<ZZ==DL1OFS+DSB'N>>
EXP ZZ ;DATA SET N
.INDEX==.INDEX+1
>
XALL
DSCTB1:REPEAT <DL1MXL-DL1MXD>,<GENLIN(\.INDEX)>
> ;END IFDEF MACCR1
ZZ==CC0OFS
XP DSCNDX,<.-DSCTAB>
XP CC0DSO,CC0OFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP CC1DSO,CC1OFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP D70DSO,D70OFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP D71DSO,D71OFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP D72DSO,D72OFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP D73DSO,D73OFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP D74DSO,D74OFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP D75DSO,D75OFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP D76DSO,D76OFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP D77DSO,D77OFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP DZDSO,DZOFS-<<M.TTG0+M.TTG1>*10>+DSCNDX
XP TTDDAL,TTDLAL-<<M.TTG0+M.TTG1>*10>+DSCNDX
REPEAT M.68L0+M.68L1+M.D70N+M.D71N+M.D72N+M.D73N+M.D74N+M.D75N+M.D76N+M.D77N+M.DZNL+M.TTDN,< EXP ZZ
ZZ==ZZ+1
>
MDSLN==:DSCTAB-.
;DEFINE SOME CHUNK SIZE PARAMETERS AND MASKS
ND TTCHKS,8 ;DEFAULT SIZE IN WORDS OF A TTY CHUNK
IFL TTCHKS-4,<TTCHKS==4> ;MUST BE AT LEAST 4
XP TTCHKS,<1B<^L<TTCHKS>>> ;WORDS IN A CHUNK (MUST BE POWER OF TWO)
XP CK.BDY,TTCHKS-1 ;MASK FOR END OF CHUNK
XP CK.BTH,-CK.BDY ;OFFSET FOR START OF CHUNK
XP CK.CPC,CK.BDY*CK.CPW ;CHARACTERS PER CHUNK
;THE FOLLOWING SLIDING SCALE DEFINES THE LENGTH OF THE TTY FREE LIST
IFNDEF TTCHKN,<
IFNDEF TTCHKK,<
XP TTCHKK,<<TTYWID-1>/CK.CPC>+4 ;ENSURE AT LEAST TTYWID CHARACTERS PER LDB
IFL TTPLEN-40,<XP TTCHKK,TTCHKK+1> ;MORE IF FEW LINES
IFL TTPLEN-20,<XP TTCHKK,TTCHKK+1> ;DITTO
IFL TTPLEN-10,<XP TTCHKK,TTCHKK+1> ;AND DITTO
> ;END OF IFNDEF TTCHKK
XP TTCHKN,TTCHKK*TTPLEN ;AT LAST, USE THIS CONSTANT TO GET TTCHKN
> ;END OF IFNDEF TTCHKN
TTCHKN==:TTCHKN ;MAKE SURE THIS SHOWS IN THE LISTING
TTCHKK==:TTCHKN/TTPLEN ;THIS ONE, TOO
;SCNSER'S INPUT WARNING/LIMIT LEVELS
IFNDEF TTYMIC,<XP TTYMIC,^D60> ;MAXIMUM INPUT CHARS/MESSAGE
;*** SHOULD MATCH DN8X DNCNFG.P11 ***
IFNDEF TTIBRK,<XP TTIBRK,^D132> ;DEFAULT ASCII/IMAGE LINE "BREAK" LEVEL
IFNDEF TTIWRN,<XP TTIWRN,^D200> ;DEFAULT ASCII/IMAGE XOFF WARNING LEVEL
IFNDEF TTIMAX,<XP TTIMAX,TTIWRN+<5*TTYMIC>> ;DEFAULT ASCII/IMAGE MAXIMUM LEVEL
IFNDEF TTPBRK,<XP TTPBRK,^D132> ;DEFAULT PIM MODE LINE "BREAK" LEVEL
IFNDEF TTPWRN,<XP TTPWRN,^D500> ;DEFAULT PIM MODE XOFF WARNING LEVEL
IFNDEF TTPMAX,<XP TTPMAX,TTPWRN+<5*TTYMIC>> ;DEFAULT PIM MODE MAXIMUM LEVEL
IFG XTCN,< ;GENERATE TABLE FOR DA28 POOL
TTLTAB::BLOCK TTD28N ;KON,,UNIT
XP MTTD28,-TTD28N ;MINUS # OF DA28 LINES
>
IFN M.LATN,< ;ONLY GENERATE IF WANT LATSER
;SOME SPACE FOR A SLOT ALLOCATION BIT TABLE FOR LAT TERMINALS
;NTTLAH==:M.LATT ;Number of LAT TTYs
NTTLAH==:M.RMCR ;Same as number of network TTYs for now
NSBWDS==:<NTTLAH+^D35>/^D36 ;One bit for each slot we could have
NFRSBQ:: BLOCK NSBWDS
MAXCIR==:M.LAMC ;Maximum number of circuits
> ;END IFN M.LATN
IFNDEF MDSLN,<MDSLN==:0>
;DEFINE A BIT TABLE SHOWING WHICH LINES WERE MONGEN'ED AS DATASETS
DSDTAB::
SALL
DEFINE GENLIN(N),<
.XCREF
IFDEF DSD'N,<IFN DSD'N,<DSDW==DSDW!ZZZ>>
.CREF
> ;END DEFINE GENLIN
ZZ==0 ;STARTING LINE NUMBER
REPEAT <M.TLTL+^D31>/^D32,<
ZZZ==1B0
DSDW==0
REPEAT ^D32,<
GENLIN(\ZZ)
ZZZ==ZZZ_-1
ZZ==ZZ+1
>
EXP DSDW
> ;END OF BUILDING DSDTAB
;SCNSER QUEUED PROTOCOL HEADERS
DEFINE QHED(N)<
IFN M'N'TTG0,<DL0TQ'N::EXP 0,0>
IFN M'N'TTG1,<DL1TQ'N::EXP 0,0>
IFN M'N'68L0,<CC0TQ'N::EXP 0,0>
IFN M'N'68L1,<CC1TQ'N::EXP 0,0>
IFN M'N'D70N,<D70TQ'N::EXP 0,0>
IFN M'N'D71N,<D71TQ'N::EXP 0,0>
IFN M'N'D72N,<D72TQ'N::EXP 0,0>
IFN M'N'D73N,<D73TQ'N::EXP 0,0>
IFN M'N'D74N,<D74TQ'N::EXP 0,0>
IFN M'N'D75N,<D75TQ'N::EXP 0,0>
IFN M'N'D76N,<D75TQ'N::EXP 0,0>
IFN M'N'D77N,<D77TQ'N::EXP 0,0>
IFN M'N'DZNL,<DZTQ'N::EXP 0,0>
>
IFN M.XTL,<XTTQUE::EXP 0,0>
ZZ=0
REPEAT CPUN,<
QHED(\ZZ)
ZZ==ZZ+1
>
MCRRTQ::EXP 0,0 ;NETWORK TERMINALS CAN RUN ON ANY CPU
; HENCE THEY HAVE A QUEUE OF THEIR OWN.
VTMQUE::EXP 0,0 ;SPECIAL QUEUE FOR NETWORK VIRTUAL TERMINALS
FRCQUE::EXP 0,0 ;FORCE COMMAND LDB FAKE OUTPUT HEADER
;HERE ONCE A TICK TO START TERMINAL OUTPUT
DEFINE TTSTRT(FT,QH,RT),<
IFN FT,<
IFNB <QH>,<
MOVEI T1,QH
>
PUSHJ P,RT##
>>
DEFINE STRG(N),<
SC'N'TIC::SE1ENT
TTSTRT(M'N'TTG0,DL0TQ'N,DL0STO)
TTSTRT(M'N'TTG1,DL1TQ'N,DL1STO)
TTSTRT(M'N'D70N,D70TQ'N,D76STO)
TTSTRT(M'N'D71N,D71TQ'N,D76STO)
TTSTRT(M'N'D72N,D72TQ'N,D76STO)
TTSTRT(M'N'D73N,D73TQ'N,D76STO)
TTSTRT(M'N'D74N,D74TQ'N,D76STO)
TTSTRT(M'N'D75N,D75TQ'N,D76STO)
TTSTRT(M'N'D76N,D76TQ'N,D76STO)
TTSTRT(M'N'D77N,D77TQ'N,D76STO)
TTSTRT(M'N'DZNL,DZTQ'N,DZSTO)
TTSTRT(FTKS10,,CTYSTO)
TTSTRT(FTKL10,,TTDSTO)
TTSTRT(M.RMCR,,NETSTO)
TTSTRT(M.DECN,,NRTSTO)
TTSTRT(M.LATN,,LATSTO)
POPJ P,
>
$HIGH
ZZ==0
REPEAT CPUN,<
STRG(\ZZ)
ZZ==ZZ+1
>
;HERE ONCE A SECOND FROM SCNSER
;ONLY ENTRIES HERE ARE ONES WHOSE ISR DISPATCH DOES SOMETHING
DEFINE TTSECN(FT,DSP),<
IFN FT,<PUSHJ P,DSP##+ISRCHK>
>
DEFINE STRG(N),<
SC'N'SEC::SE1ENT
TTSECN(M'N'TTG0,DL0DSP)
TTSECN(M'N'TTG1,DL1DSP)
TTSECN(M'N'68L0,CC0DSP)
TTSECN(M'N'68L1,CC1DSP)
TTSECN(M'N'DZNL,DZDSP)
TTSECN(FTKL10,CTYDSP)
TTSECN(M.DECN,NRTDSP)
TTSECN(M.LATN,LATDSP)
POPJ P,
>
ZZ==0
REPEAT CPUN,<
STRG(\ZZ)
ZZ==ZZ+1
>
;THE TTY COMMAND MAP HAS 1 BIT PER LINE ARRANGED 32 BITS PER WORD
;THUS LINE 0 IS BIT 0 OF WORD 0, LINE 37(8) IS BIT 31 OF WORD 0,
; LINE 40(8) IS BIT 0 OF WORD 1, AND SO ON.
$LOW
TTMAPN==<TTPLEN/^D32>+1
CMDMAP::BLOCK TTMAPN ;TTY COMMAND BIT MAP
$HIGH
REPEAT 0,< ;FOR HISTORICAL REASONS
;TTYCMD IS CALLED ON EVERY CLOCK TICK TO LOOK FOR A COMMAND. IF THERE
; IS A COMMAND WAITING IT CALLS COMCON TO PROCESS IT. COMCON IN TURN
; CALLS TTFCOM WHICH SCANS CMDMAP TO FIND THE COMMAND. THE ENTIRE
; PROCESS IS VERY FAST AND IS NOT ERROR PRONE.
TTYCMD:: ;HERE TO TEST FOR A COMMAND
ZZ==0
REPEAT TTMAPN,<
SKIPE CMDMAP+ZZ ;ANY COMMANDS IN THIS GROUP?
PJRST COMMAND## ;YES--CALL COMCON
ZZ==ZZ+1
XLIST
>;END REPEAT
LIST
POPJ P,0
> ;END REPEAT 0
XP TTCMPT,-TTMAPN ;AOBJN POINTER TO COMMAND MAP
TTDALT:: ;XCTED IN SCNSER TO SET TTY ALT DEFAULT
IFE TTYALT,<
IORM T1,LDBPAG##(U) ;NORMAL DEFAULT IS TTY NO ALT
>
IFN TTYALT,<
ANDCAM T1,LDBPAG##(U) ;IF LOTS OF 33S AND 35S
>
SUBTTL TERMINAL DATA BASE -- TERMINAL CHARACTERISTICS DEFINITION
TTPWID::POINT 8,TCRTAB(T1),7 ;POINTER TO TERMINAL WIDTH
TTPLNB::POINT 8,TCRTAB(T1),15 ;POINTER TO TERMINAL LENGTH
TTPFRM::POINT 1,TCRTAB(T1),16 ;ON IF TERMINAL HAS HARDWARE FORM FEEDS
TTPTAB::POINT 1,TCRTAB(T1),17 ;ON IF TERMINAL HAS HARDWARE TABS
TTPLCT::POINT 1,TCRTAB(T1),18 ;ON IF TERMINAL DOESN'T HAVE LOWER CASE CHARACTERS
TTPALT::POINT 1,TCRTAB(T1),19 ;ON IF NO ALTMODE CONVERSION IS REQUIRED
TTPDIS::POINT 1,TCRTAB(T1),20 ;ON IF "DISPLAY" TERMINAL (E.G., FOR DDT)
TTPNFC::POINT 1,TCRTAB(T1),21 ;ON IF TERMINAL NO CRLF
TTPXNF::POINT 1,TCRTAB(T1),22 ;ON IF TERMINAL HAS ^S/^Q
TTP8BT::POINT 1,TCRTAB(T1),23 ;ON IF TERMINAL HAS 8-BIT ASCII CHARACTER SET
TTPFLC::POINT 2,TCRTAB(T1),35 ;POINTER TO DEFAULT FILL CLASS
DEFINE CUSTRM,< ;CUSTOMER TERMINAL TYPES
SPCTRM ;MONGEN CUSTOMER TERMINAL TYPES
TERMCR LA34, 132, 0, NOFF, TAB, LC, NOALT, NODIS, NOCRLF, XON, NO8BIT, 0, 0, 0
>
DEFINE DECTRM,< ;DEC TERMINAL TYPES
TERMCR TTY, 72, 0, NOFF, NOTAB, NOLC, ALT, NODIS, CRLF, XON, NO8BIT, 1, 0, 0
TERMCR VT05, 72, 20, NOFF, TAB, NOLC, NOALT, DIS, CRLF, XON, NO8BIT, 2, VT06EP, VTXXBP
TERMCR VT06, 72, 25, NOFF, NOTAB, NOLC, NOALT, DIS, CRLF, XON, NO8BIT, 1, VT06EP, VT06BP
TERMCR VT50, 80, 12, NOFF, TAB, NOLC, NOALT, DIS, CRLF, XON, NO8BIT, 0, VTXXEP, VTXXBP
TERMCR VT52, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, VTXXEP, VTXXBP
TERMCR VT61, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, VTXXEP, VTXXBP
TERMCR DAS21, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, VTXXEP, VTXXBP
TERMCR VT100, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, V100EP, VTXXBP
TERMCR TTY33,LT33, 72, 0, NOFF, NOTAB, NOLC, ALT, NODIS, CRLF, XON, NO8BIT, 1, 0, 0
TERMCR TTY35,LT35, 72, 0, FF, TAB, NOLC, ALT, NODIS, CRLF, XON, NO8BIT, 1, 0, 0
TERMCR LA30, 72, 0, NOFF, NOTAB, NOLC, NOALT, NODIS, CRLF, XON, NO8BIT, 1, 0, 0
TERMCR LA36, 132, 0, NOFF, NOTAB, LC, NOALT, NODIS, NOCRLF, XON, NO8BIT, 0, 0, 0
TERMCR 2741, 128, 0, NOFF, NOTAB, LC, NOALT, NODIS, NOCRLF, XON, NO8BIT, 3, 0, 0
TERMCR LA38, 132, 0, NOFF, TAB, LC, NOALT, NODIS, NOCRLF, XON, NO8BIT, 0, 0, 0
TERMCR LA120, 132, 0, FF, TAB, LC, NOALT, NODIS, NOCRLF, XON, NO8BIT, 0, 0, 0
TERMCR VT125, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, V100EP, VTXXBP
TERMCR VK100, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, V100EP, VTXXBP
TERMCR VT101, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, V100EP, VTXXBP
TERMCR VT102, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, V100EP, VTXXBP
TERMCR VT103, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, V100EP, VTXXBP
TERMCR VT180, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, V100EP, VTXXBP
TERMCR VT185, 80, 24, NOFF, TAB, LC, NOALT, DIS, CRLF, XON, NO8BIT, 0, V100EP, VTXXBP
>
DEFINE TERMCR(NAME,ALIAS,WIDTH,LENGTH,$FF,$TAB,$LC,$ALT,$DIS,$CRLF,$XON,$8BIT,FILL,BPERAS,BPRUBO<**UNSPECIFIED**>),<
IFIDN <BPRUBO><**UNSPECIFIED**>,<TRMCR1 NAME,,ALIAS,WIDTH,LENGTH,$FF,$TAB,$LC,$ALT,$DIS,$CRLF,$XON,$8BIT,FILL,BPERAS>
IFDIF <BPRUBO><**UNSPECIFIED**>,<TRMCR1 NAME,ALIAS,WIDTH,LENGTH,$FF,$TAB,$LC,$ALT,$DIS,$CRLF,$XON,$8BIT,FILL,BPERAS,BPRUBO>
>
DEFINE TRMCR1(NAME,ALIAS,WIDTH,LENGTH,$FF,$TAB,$LC,$ALT,$DIS,$CRLF,$XON,$8BIT,FILL,BPERAS,BPRUBO),<
X1==0
IFE <SIXBIT/$FF/>-<SIXBIT/FF/>,<X1==1>
X2==0
IFE <SIXBIT/$TAB/>-<SIXBIT/TAB/>,<X2==1>
X3==1
IFE <SIXBIT/$LC/>-<SIXBIT/LC/>,<X3==0>
X4==1
IFE <SIXBIT/$ALT/>-<SIXBIT/ALT/>,<X4==0>
X5==0
IFE <SIXBIT/$DIS/>-<SIXBIT/DIS/>,<X5==1>
X6==1
IFE <SIXBIT/$CRLF/>-<SIXBIT/CRLF/>,<X6==0>
X7==0
IFE <SIXBIT/$XON/>-<SIXBIT/XON/>,<X7==1>
X8==0
IFE <SIXBIT/$8BIT/>-<SIXBIT/8BIT/>,<X8==1>
IFNDEF T'NAME,<T'NAME:>
BYTE (8)^D'WIDTH(8)^D'LENGTH(1)X1(1)X2(1)X3(1)X4(1)X5(1)X6(1)X7(1)X8(10)0(2)FILL
IF2,< .IF BPERAS,NEEDED,<EXTERN BPERAS>
.IF BPRUBO,NEEDED,<EXTERN BPRUBO>
>
XWD BPERAS,BPRUBO ;<CR> EOL,,B.S. SPACE B.S.
>
;EXPAND TERMINAL PARAMTERS
CTCTAB::CUSTRM
TCRTAB::DECTRM
DEFINE TRMCR1(NAME,ALIAS,WIDTH,LENGTH,$FF,$TAB,$LC,$ALT,$DIS,$CRLF,$XON,$8BIT,FILL,BPERAS,BPRUBO),<
EXP SIXBIT /NAME/
>
;EXPAND TERMINAL TYPES (FOR COMCON)
CTTWDT::CUSTRM
TTTWDT::DECTRM
TTTWDN==:.-CTTWDT
DEFINE TRMCR1(NAME,ALIAS,WIDTH,LENGTH,$FF,$TAB,$LC,$ALT,$DIS,$CRLF,$XON,$8BIT,FILL,BPERAS,BPRUBO),<
IFNB /ALIAS/,<
IFDIF <NAME><ALIAS>,< EXP SIXBIT /NAME/>
>
>
;TABLE OF SIXBIT TERMINAL NAMES THAT ARE ALIASED FOR NRTSER
TRMTAB::CUSTRM
DECTRM
TRMTBL==:.-TRMTAB ;LENGTH
DEFINE TRMCR1(NAME,ALIAS,WIDTH,LENGTH,$FF,$TAB,$LC,$ALT,$DIS,$CRLF,$XON,$8BIT,FILL,BPERAS,BPRUBO),<
IFNB /ALIAS/,<
IFDIF <NAME><ALIAS>,< EXP SIXBIT /ALIAS/>
>
>
;TABLE OF SIXBIT ALIASES MATCHING TERMINAL NAMES ABOVE
TRMNAM::CUSTRM
DECTRM
SUBTTL TERMINAL DATA BASE -- POINTERS FOR CURSOR SEQUENCES
VT06BP: POINT 9,VT06TB
POINT 9,VT06TB+2,8
POINT 9,VT06TB+4,17
POINT 9,VT06TB+6,26
POINT 9,VT06TB+10,35
POINT 9,VT06TB+13,8
POINT 9,VT06TB+15,17
POINT 9,VT06TB+17,26
VT06EP: POINT 9,VT06EL
POINT 9,VT06E1
POINT 9,VT06E2
POINT 9,VT06E3
VTXXBP: POINT 9,VTXXTB
POINT 9,VTXXTB,26
POINT 9,VTXXTB+1,17
POINT 9,VTXXTB+2,8
POINT 9,VTXXTB+2,35
POINT 9,VTXXTB+3,26
POINT 9,VTXXTB+4,17
POINT 9,VTXXTB+5,8
VTXXEP: POINT 9,VTXXEL
POINT 9,VTXXE1
POINT 9,VTXXE2
POINT 9,VTXXE2,17
V100EP: POINT 9,VTXXEL
POINT 9,V100E1
POINT 9,V100E2
POINT 9,V100E2,17
SUBTTL TERMINAL DATA BASE -- CURSOR CONTROL SEQUENCES
VT06TB: BYTE (9) 177,177,177,010,040,177,177,177
BYTE (9) 010,177,177,177,010,040,177,177
BYTE (9) 177,010,177,177,177,010,040,177
BYTE (9) 177,177,010,177,177,177,010,040
BYTE (9) 177,177,177,010,177,177,177,010
BYTE (9) 040,177,177,177,010,177,177,177
BYTE (9) 010,040,177,177,177,010,177,177
BYTE (9) 177,010,040,177,177,177,010,177
BYTE (9) 177,177,010,040,177,177,177,010
BYTE (9) 0
VT06EL: BYTE (9) 015,177,177,177,0
VT06E1: BYTE (9) 30,177,177,177,0
VT06E2: BYTE (9) 30,177,177,177
VT06E3: BYTE (9) 36,177,177,177,0
VTXXTB: BYTE (9) 010,040,010,010,040,010,010,040
BYTE (9) 010,010,040,010,010,040,010,010
BYTE (9) 040,010,010,040,010,010,040,010
BYTE (9) 0
VTXXEL: BYTE (9) 015,0
VTXXE1: BYTE (9) 33,103,0
VTXXE2: BYTE (9) 33,103,33,113,0
V100E1: BYTE (9) 233,103,0
V100E2: BYTE (9) 233,103,233,113,0
SUBTTL DTESER DATA BASE GENERATION
$LOW
IFN FTKL10,<
.XCREF
;GENERATE FRONT END DEVICE BLOCKS
FEDGEN
;GENERATE HEADER FOR COMM REGION
ETHEAD
;GENERATE COMM REGION ITSELF
ETREGN
;GENERATE DTE CONTROL BLOCKS
ETDGEN
;GENERATE TABLE OF CORRESPONDENCE BETWEEN CPU#,DTE# AND DTE CONTROL BLOCKS
.CREF
ETDTBX
;TABLE FOR MASTER DTE CONTROL BLOCK ADDRESS FOR EACH CPU
DEFINE DFLMAS (C),<
EXP ETD'C'1B
>
DTEMAS::
N10==0
REPEAT M.CPU,<
DFLMAS \N10
N10==N10+1
>
;MACROS FOR RSX-20F DEVICE SYMBOLS AND STORAGE
DEFINE RSX20F <
N10==0 ;;INDEX FOR -10 CPU #
REPEAT M.CPU,< ;;DO FOR EACH CPU ON SYSTEM
RSXCPU \N10 ;;CALL CPU MACRO
N10==N10+1 ;;STEP TO NEXT CPU
>
>
DEFINE RSXCPU (C) <
IFDEF M'C'DTEN,< ;;DO ONLY IF DTE(S) ON THIS CPU
N11==0 ;;INDEX FOR -11 CPU (DTE) #
REPEAT M'C'DTEN,< ;;DO FOR ALL DTE'S
RSXDTE \C,\N11 ;;CALL CURRENT DTE MACRO
N11==N11+1 ;;STEP TO NEXT -11 (DTE)
>
>
>
> ;END FTKL10
SUBTTL NETWORK SYMBOLS FOR NON-NETWORK SYSTEMS
IFE M.NET,< ;IF MONGEN ANSWER IS NO THEN DEFINE SYMBOLS
NODE.U==:CPOPJ## ;ILLEGAL UUO
TSTNET==:CPOPJ## ;NO NETWORK DEVICES
GENNET==:CPOPJ##
NET2ND==:CPOPJ##
HOST.U==:CPOPJ##
SRCNDB==:CPOPJ##
NETCTC==:CPOPJ##
ZAPNET==:CPOPJ##
STBSCA==:CPOPJ##
D85DSC==:ECOD4##
RDA$IN==:CPOPJ##
CDR$IN==:CPOPJ##
NETRTY::0 ;NO NETWORK TTYS
NDBNNM==:0 ;NO STATION BLOCKS
NETDSP==:0 ;NO SERVICE ROUTINE
STBOPR::PUSH P,U ;SAVE LDB
MOVE U,OPRLDB## ;GET CENTRAL (ONLY) OPR LDB
LDB T1,LDPLNO## ;GET LINE NUMBER
PJRST UPOPJ## ;RESTORE AC AND RETURN.
>;END IFE M.NET
IFE M.DN6S,<
IFN FTKL10,<
D6SDDS==:EATDSP##
>
D60UP==:CPOPJ##
D60DWN==:CPOPJ##
>
IFN M.KL10,<
IFE M.DN6S,<
D6SED==:ECOD2##
D6SQ11==:ECOD2##
DWND6S==:STOTAC##
D6STMO==:CPOPJ##
>
IFE M.DN6D,<
D6DED==:ECOD2##
D6DQ11==:ECOD2##
>
>;END IFN M.KI10!M.KL10
IFN M.KL10&FTNET,<
IFE <M.NET>*<M.DN8S>,< ;IF NONETWORKS OR NO DN87S'S
NCLDSP==:EATDSP##
>
>;END IFN M.KL10&FTNET
IFE <M.NET!M.DAS78!M.DN60>,< ;NEITHER NETWORKS, DAS78S, NOR DN60S
WHERE==:CPOPJ##
LOCATE==:CPOPJ##
> ;END IFE <M.NET!M.DAS78!M.DN60>
IFN M.DN60,<IFE M.NET,<SRCNDB==:CPOPJ>> ;GIVE NONSKIP RETURN
IFNDEF M.KDUP,<M.KDUP==0>
IFNDEF M.DMRN,<M.DMRN==0>
IFN M.NET!M.DC76,< ;ANY IBM 2741 FE SUPPORT
$HIGH
;SUBROUTINE EXEINX - RETURN AN INDEX TO THE GOLF BALL NUMBER
;CALL MOVEI T3,BALL NUMBER(BINARY)
; PUSHJ P,ELEINX
;RETURN CPOPJ ;NOT IN THE TABLE
; CPOPJ1 ;FOUND T2=INDEX
ELEINX::MOVSI T2,-ELELEN ;SIZE OF TABLE
CAME T3,ELETAB(T2) ;MATCH
AOBJN T2,.-1 ;NO--LOOP FOR MORE
JUMPGE T2,CPOPJ## ;EXIT IF NOT FOUND
PJRST CPOPJ1## ;GOOD RETURN
RADIX 10
ELETAB::EXP 029,087,938,963,987,988
RADIX 8
ELELEN==.-ELETAB
$LOW
>;END M.NET!M.DC76
IFN FTXTC,<
IFN M.XTC,<
XP MX11BF,^D129 ;MAXIMUM PDP-11 IMAGE BINARY BUFFER SIZE
DEFINE XTCDEF (X),<
IFNDEF XT'X'S,<XT'X'S==420+X*10>
IFNDEF XT'X'C,<XT'X'C==:424+X*10>
XP XKBSKP,400450
XT'X'INT:: CONSO XT'X'C,XKBSKP ;EXTERNAL PROCESSOR INTERRUPT?
JRST .-1 ;NO, GO DOWN THE SKIP CHAIN
JSR XT'X'SAV## ;SAVE ALL THE AC'S
PUSHJ P,SAVE4## ; ..
JSP W,XTCINT## ;CALL XTCSER
XP XTCCHN,XT'X'CHN##
DEFINE XTLNK (A) <
IFN A-XTCN,<
XKBKDB::!EXP XKB'A' ;LINK TO NEXT KDB
>
IFE A-XTCN,<
XKBKDB::!EXP 0 ;NO MORE KDB'S
>
>
XP XKBINT,<XT'X'INT-.>
Z=X+1
XKB'X:: PHASE 0 ;BEGIN CONTROLLER DATA BLOCK
XKBNAM::!XWD 'EPA'+X,0 ;EP NAME
XTLNK \Z ;LINK TO NEXT KDB
XKBUDB::!BLOCK 21 ;SPACE FOR LINKS TO UDBS
XTSCNO::!CONO XT'X'S,(T1)
XTCCNO::!CONO XT'X'C,(T1)
XTSCNI::!CONI XT'X'S,T1
XTCCNI::!CONI XT'X'C,T1
XTSDTI::!DATAI XT'X'S,T1
XTCDTI::!DATAI XT'X'C,T1
XTCDTO::!DATAO XT'X'C,T1
XTSDTO::!DATAO XT'X'S,T2
XTCBSY::!CONSZ XT'X'C,20
XKBLOK::!EXP -1 ;INTERLOCK
XKBDDB::!BLOCK 1 ;POINTER TO DDB WAITING FOR INTRPT
XKBIUN::!BLOCK 1 ;POINTER TO UDB WAITING FOR INTERRUPT
XKBDAC::!BLOCK 1 ;INFO FROM LAST CONI DAC
XKBDAS::!BLOCK 1 ;INFO FROM LAST CONI DAS
XKBTIM::!BLOCK 1 ;COUNTER FOR TIMEOUT
XKBIOW::!BLOCK 1 ;IOWD FOR DAC OR PNTR TO IOLIST
XKBCUR::!BLOCK 1 ;CUR PNTR TO IOLIST (KI10 ONLY)
XKBGRB::!Z ;0 IF FREE 1 IF GRABBING
;CONTROL -1 IF GRABBED
XKBPAC::!BLOCK 1 ;# OF PSEUDO ACTIVE DDB'S ON THIS
; CONTROLLER
XKBREQ::!BLOCK 1 ;OLDEST JOB # REQUESTING USE OF UDB
XKBMBF::!BLOCK <MX11BF*3>/2 ;MONITOR BUFFER
DEPHASE
>
ZZ=0
IFE XTCN,<
XTUUO==:CPOPJ## ;NO XTUUO IF NO XTCSER
XTKLDB==:CPOPJ## ;ALSO NO DDB KILLER
XTCTTY::AOS (P) ;DOUBLE SKIP
JRST CPOPJ1##
XTCTYP==:CPOPJ##
>
IFN XTCN,<EXTERN XTCSER> ;LOAD XTCSER IF NEEDED
REPEAT XTCN,<
XTCDEF (\ZZ)
ZZ=ZZ+1
>
>> ;;END OF FTXTC FEATURE
SUBTTL MAGTAPE DATA BASE FOR TAPSER
IFG TAPN,<
EXTERN TAPSER,TAPUUO
;SOME GENERALLY USEFUL MACROS
DEFINE CALUNI (Y,EMACR) <
..UNI==0
REPEAT M.MT'Y,<
GENUNI (Y,\..UNI,EMACR)
..UNI==..UNI+1>
>
DEFINE UNIMAC (A,B) <
..U'A'B>
DEFINE CHNMAC (Z) <
CHN'Z'CB##>
;NOTE: ANY CHANGE TO THE DDB STRUCTURE SHOULD
; ALSO BE MADE TO THE LABEL DDB PROTOTYPE
; DEFINED IN TAPUUO.
DEFINE GENDDB (X,Y) <
MT'X'DDB:: <SIXBIT /MTA0/>+<X>_^D18 ;(0) DEVNAM
<^D5*HUNGST>,,MTSIZ+1 ;(1) DEVCHR
0 ;(2) DEVIOS
TPMDSP## ;(3) DEVSER
DVLNG!1023,,154403+BYTBIT ;(4) DEVMOD
0 ;(5) DEVLOG
0 ;(6) DEVBUF
0 ;(7) DEVIAD
0 ;(10) DEVOAD
;;BITS 0-13 ARE USED FOR FRAME-COUNT
0 ;(11) DEVSTS
.TYMTA!DEPLEN,,Y*DEPEVM ;(12) DEVSTA
2B<DENHCI> ;(13) DEVXTR
DESHCT==:^D3 ;HUNG COUNTER SIZE (Q'D/ASYNCH I/O ONLY)
DENHCI==:^D2 ;VALUE TO INITIALIZE AT
DENHCT==:^D5 ;THE BIT
;BITS 0-2 ARE NUMBER OF TIMES WE ALLOW A Q'D PROTOCAL OR ASYNCRONOUS I/O
;REQUEST TO TIME OUT (IF IT WASN'T ACTUALLY STARTED YET) BEFORE REALLY
;HANGING THE DEVICE.
;BITS 3-5 ARE THE COUNTER (COUNTS FROM CONTENTS OF BITS 0-2 TO ZERO)
;DEFAULT IS 2 TIMES TOTAL THROUGH THE HUNG CODE.
;BITS 22-30 = NUMBER OF INPUT BUFFERS
0 ;(14) DEVEVM
0 ;(15) DEVPSI
0 ;(16) DEVESE
0 ;(17) DEVHCW
2000*Y+M.MT'X'P*100000,,0 ;(20) DEVCPU .QUEUED PROTOCOL IF NOT TM10A
0 ;(21) DEVISN
0 ;(22) DEVJOB
0 ;(23) DEVFIL
0 ;(24) DEVEXT
0 ;(25) DEVPPN
IFN FTKL10&FTMP,<
0 ;(26) DEVNBF
0 ;(27) DEVSBF
0 ;(30) DEVCSN
>
PHASE DEVLLD+IFN FTKL10&FTMP,<3>
TDVUDB::! ;LH = UDB PNTR
TDVKDB::! ..U'X'0,,MT'X'KDB ;RH = KDB PNTR (PRIME CONTROLLER)
TDVSTS::! 0 ;UNIT STATUS INFO
TDVIOR::! 0 ;IORB TO WAIT FOR
TDVSUL::! 0 ;SAVED USER UPPER LIMIT
TDVSLL::! 0 ;SAVED USER LOWER LIMIT
TDVSVM::! 0 ;SAVED M FOR DUMP MODE
TDVREM::! 0 ;REMAINDER FOR MODE 16
DEPHASE
XP MT'X'DDS,.-MT'X'DDB ;SIZE OF DDB
> ;END GENDDB MACRO
;MACRO TO GENERATE A KDB
DEFINE GENKDB (X,KMACR) <
MT'X'INT::
IFE M.KS10,<
CONSO MT'X'S,0 ;INTERUPT INSTRUCTION
JRST .-1
>
IFN M.KS10,<
0 ;VECTORRED INTERRUPT JSR'S TO HERE
EXP 0,IC.UOU,.+1 ;XPCW BLOCK
EXCH T1,MT'X'INT ;GET INTERRUPT PC
MOVEM T1,MT'X'CHL## ;STORE IN "CH'PI" SO JEN WILL DISMISS CORRECTLY
MOVE T1,MT'X'INT+1 ;SECOND WORD
MOVEM T1,MT'X'CHL##+1 ;FOR XJEN
MOVE T1,MT'X'INT ;AND RESTORE T1
>;END IFN M.KS10
IFN FTAUTC,<
JSR 0 ;AUTCON WILL FILL THIS IN
>
IFE FTAUTC,<
JSR MT'X'SAV## ;SAVE ACS
>
JSP W,TAPINT##
XP TKBCSO,MT'X'INT-. ;OFFSET OF CONSO INSTR FROM KDB
MT'X'KDB:: PHASE 0
TKBNAM::!
IFN FTAUTC,<0>
IFE FTAUTC,<
<SIXBIT /MT0/>+<X>B17
>
TKBCNT::! 0 ;(1) NUMBER OF RECORDS DONE ON THIS OPERATION
TKBKDB::!
IFN FTAUTC,<0>
IFE FTAUTC,<
IFE <X-TAPN+1>,<0> ;(2) LINK TO NEXT KDB
IFN <X-TAPN+1>,<MTLINK (\<X+1>)>
>
TKBIUN::! -M.MT'X,,TKBUDB+IFE FTAUTC,<MT'X'KDB> ;(3) INITIAL UNIT AOBJN PNTR
TKBCUN::! -M.MT'X,,TKBUDB+IFE FTAUTC,<MT'X'KDB> ;(4) CURRENT UNIT AOBJN PNTR
TKBDSP::! MT'X'DSP ;(5) KONTROLLER DISPATCH
TKBSTS::!
IFN FTAUTC,<0>
IFE FTAUTC,<
BYTE (3)M.MT'X'P(33)0 ;(6) KONTROLLER STATUS
>
;(RH) CONSECUTIVE OPS REMAINING
TKBICP::
IFN FTAUTC,<0>
IFE FTAUTC,<
IFE M.MT'X'T-K.TMA,<
MTALOC##+1000*M.MT'X'P> ;PI CHL FOR TM10A
IFE M.MT'X'T-K.TMB,<
$LOCW*4+LOCOCW##
$LOCW==$LOCW+1> ;TM10B
IFE M.MT'X'T-K.TC1,<
$LOCW*4+LOCOCW##
$LOCW==$LOCW+1> ;TC10C
IFE M.MT'X'T-K.TX1,<
$LOCD*4+LOCODW##
$LOCD==$LOCD+1> ;DX10 TYPE
IFE M.MT'X'T-K.TM2,<
IFLE M.T2'X'T,<
$LOCW*4+LOCOCW##
$LOCW==$LOCW+1> ;TM02 ON RH10
IFG M.T2'X'T,<
ZZ==4*M.T2'X'T
IFE ZZ-40,<ZZ==0>
.E0MP+ZZ+2000*M.MT'X'P
>
>
IFE M.MT'X'T-K.DX2,<
ZZ==4*M.D2'X'T
IFE ZZ-40,<ZZ==0>
.E0MP+ZZ+2000*M.MT'X'P
>
IFE M.MT'X'T-K.T78,<
ZZ==4*M.T7'X'T
IFE ZZ-40,<ZZ==0>
.E0MP+ZZ+2000*M.MT'X'P
>
>
TKBTIM::! 0 ;(10) TIMER FOR SPACING OPS
TKBCDB::!
IFN FTAUTC,<0>
IFE FTAUTC,<
IFE M.MT'X'T,<0> ;(11) PNTR TO CHL IF NOT TM11A
IFN M.MT'X'T,<CHNMAC(\M.MT'X'C)>
>
TKBJOB::! 0 ;(12) JOB NUMBER OF MAINT-MODE OWNER
; TKBJOB MUST IMMEDIATELY PRECEDE TKBCCL
TKWCCL==:5 ;NUMBER OF WORDS IN CHANNEL COMMAND LIST
TKBCCL::! BLOCK TKWCCL ;(13) CHANNEL COMMAND LIST
TKBERB::!
IFN FTAUTC,<0>
IFE FTAUTC,<
MT'X'DDB ;(21) IORB FOR ERROR RECOVERY
>
BLOCK 3 ;ADDR OF DDB AT ONCE ONLY
IFN FTMP,<
TKBFCT::!EXP TKBICT ;FAIRNESS COUNT TO ALLOW QUEUED I/O TO START
; EVEN IF PENDING REQUESTS ON THIS CPU
>
TKBUDB::! ..UNI==0
IFE FTAUTC,<
REPEAT M.MT'X,<
UNIMAC (X,\..UNI)
..UNI==..UNI+1>
BLOCK ^D8-M.MT'X ;ALLOW FOR 8 MAX UNITS
>
IFN FTAUTC,<
BLOCK ^D8
>
TKBUNI::!IFN FTAUTC,<0>
IFE FTAUTC,<
XWD M.MT'X'U,1_M.MT'X'U ;UNIT, ATTEN BIT FOR MULTI UNITS ON AN RH
; NEGATIVE IF NON MULTI-UNIT CONTROLLER
>
IFE FTKS10,<
TKBVIN::!0 ;VECTOR INTERRUPTS HERE
0
EXP IC.UOU
EXP .+1+IFE FTAUTC,<MT'X'KDB>
XCT TKBCSO+2+IFE FTAUTC,<MT'X'KDB> ;JSR TAPSAV
DMOVE T1,TKBVIN+IFE FTAUTC,<MT'X'KDB>
DMOVEM T1,@.CPTCH##
JRST TKBCSO+3+IFE FTAUTC,<MT'X'KDB> ;GO TO JSP TAPINT
IFE M.MT'X'T-K.TM2,<
TKBIVI::!IFN FTAUTC,<0> ;DATAO CONTENTS TO SET UP INTERRUPT VECTOR
IFE FTAUTC,<
IFLE M.T2'X'T,<444002,,$LOCW*4+LOCOCW##-1>
IFG M.T2'X'T,<
ZZ==4*M.T2'X'T
IFE ZZ-40,<ZZ==0>
744400,,ZZ+3
>
> ;END IFE FTAUTC
TT2CI2::!
TKBCIS::!CONI MT'X'S,T2
TKBDIS::!DATAI MT'X'S,T2
TKBDOS::!DATAO MT'X'S,T2
TT2CO1::!CONO MT'X'S,(T1)
TT2CO3::!CONO MT'X'S,(T3)
TT2UVA::!0 ;TEMP FOR READ-BACKWARDS
> ;END IFE M.MT'X'T-K.TM2
IFE M.MT'X'T-K.T78,<
TKBIVI::!IFN FTAUTC,<0>
IFE FTAUTC,<
ZZ==4*M.T7'X'T
IFE ZZ-40,<ZZ==0>
744400,,ZZ+3
>
TKBCIS::!CONI MT'X'S,T2
TKBDIS::!DATAI MT'X'S,T2
TKBDOS::!DATAO MT'X'S,T2
T78COS::!CONO MT'X'S,(T3)
T78UVA::!0
T78RRO::!0
T78ACT::!0 ;;COUNT OF CONTINUOUS ASYNC INTERRUPTS
T78AMX==:^D10 ;;MAX BEFORE SHUTTING DOWN THE TM78
T78XIW::!RH2TRA##!RH2LST##!<17_4>,,T78REG+30 ;IOWD TO READ ERROR LOG INFO
;;MAKE SURE TO CHANGE T78CTG IF THIS CHANGES
> ;END IFE M.MT'X'T-K.T78
> ;END IFE FTKS10
KMACR(X) ;KONTROLLER DEPENDENT DATA
DEPHASE
> ;END DEFINE GENKDB
DEFINE MTLINK (X) <MT'X'KDB>
;MACRO TO GENERATE ALL TAPE INFO
DEFINE GENTAP (KON) <
EXPNDK (KON) ;DEFINE 7 TRACK UNITS AND 6250 BPI UNITS
IFLE <M.MT'KON'T-K.TMB>,< ;ALL TM10S
MT'KON'DSP=TMXDSP##
EXTERN TMXKON
DOTM10(KON,M.MT'KON'T) ;GEN FOR APPROPRIATE TYPE
>
IFE <M.MT'KON'T-K.TC1>,< ;TC10C
MT'KON'DSP=TCXDSP##
EXTERN TCXKON
MT'KON'S==724+4*<%TC10-M.TC'KON'P> ;TC10 STATUS REG
CALUNI(KON,ETCMAC) ;GEN UNITS
GENKDB(KON,KTCMAC) ;GE KDB
BYTBIT==0_BYTMOD
GENDDB(KON,1) ;DDB PROTOTYPE
%TC10==%TC10+1 ;ADVANCE TO NEXT TC10C
>
IFE <M.MT'KON'T-K.TX1>,< ;TX01
MT'KON'DSP=TX1DSP##
EXTERN TX1KON
MT'KON'S==220+4*<%DX10-M.TX'KON'P>
IFG <MT'KON'S-224>,<MT'KON'S==MT'KON'S-174>
;DX10 STATUS REG
CALUNI(KON,ETXMAC) ;GEN UNITS
GENKDB(KON,KTXMAC) ;GEN KDB
BYTBIT==1_BYTMOD
GENDDB(KON,1) ;DDB PROTOTYPE
%DX10==%DX10+1 ;ADVANCE TO NEXT DX10
;TM02
>
IFE <M.MT'KON'T-K.TM2>,<
MT'KON'DSP==TM2DSP##
EXTERN TM2KON
IFLE M.T2'KON'T,<
MT'KON'S==270-4*M.T2'KON'T
IFG <MT'KON'S-277>,<MT'KON'S==MT'KON'S+60>
>
IFG M.T2'KON'T,<
MT'KON'S==540+4*<M.T2'KON'T>
IFE <MT'KON'S-600>,<MT'KON'S==540>
>
CALUNI(KON,ET2MAC)
GENKDB(KON,KT2MAC)
BYTBIT==1_BYTMOD
GENDDB(KON,1)
>
IFE <M.MT'KON'T-K.TM2H>,< ;RH11/TU45 FOR KS10
MT'KON'DSP==TRHDSP##
EXTERN TRHKON
CALUNI(KON,ETRMAC)
GENKDB(KON,KTRMAC)
BYTBIT==1_BYTMOD
GENDDB(KON,1)
>
IFE <M.MT'KON'T-K.DX2>,< ;RH20/DX20/TX02
MT'KON'DSP==TD2DSP##
EXTERN TD2KON,DX2COM
MT'KON'S==540+4*<M.D2'KON'T>
IFE <MT'KON'S-600>,<MT'KON'S==540>
CALUNI(KON,ED2MAC)
GENKDB(KON,KD2MAC)
BYTBIT==1_BYTMOD
GENDDB(KON,1)
>
IFE <M.MT'KON'T-K.T78>,< ;RH20/TM78/TU78
MT'KON'DSP==T78DSP##
EXTERN T78KON
MT'KON'S==540+4*<M.T7'KON'T>
IFE <MT'KON'S-600>,<MT'KON'S==540>
CALUNI(KON,E78MAC)
GENKDB(KON,K78MAC)
BYTBIT==1_BYTMOD
GENDDB(KON,1)
>
>
DEFINE DOTM10 (KON,TYP) <
MT'KON'C==340+10*<%TM10-M.T1'KON'P>S ;TM10 COMMAND REG
MT'KON'S==MT'KON'C+4 ;TM10 STATUS REG
CALUNI(KON,ETMMAC) ;GEN UNITS
GENKDB(KON,KTMMAC) ;GEN KDB
BYTBIT==0_BYTMOD
GENDDB(KON,TYP) ;GEN DDB PROTOTYPE FOR UNIT 0
%TM10==%TM10+1 ;ADVANCE TO NEXT UNIT
>
DEFINE TAPINS(X,Z) <
REPEAT M.MT'X'Z,<
UNIMAC(X,\..UNI)
..UNI==..UNI+1>
IFN M.MT'X'T-K.T78,<
BLOCK ^D8-M.MT'X'Z
..UNI==..UNI+^D8-M.MT'X'Z
>
IFE M.MT'X'T-K.T78,<
BLOCK 4-M.MT'X'Z
..UNI==..UNI+4-M.MT'X'Z
>
>
;MACROS TO FIGURE OUT WHICH UNITS ARE 7 TRACK OR CAPABLE OF 6250 BPI
DEFINE EXPNDK (K) <
..X=7
MACKN'K (K)
..X=6
MACK6'K (K)>
DEFINE KN (A,B,C<0>) <
IFIDN <B>,<ALL>,<TKREP (\..X,A,0,M.MT'A)>
IFDIF <B>,<ALL>,<TKREP (\..X,A,B,C)>
>
DEFINE TKREP (X,A,B,C) <
IFE C,<DEF'X (A,\B)>
IFN C,<
..UNI==B
REPEAT <C-B+1>,<
DEF'X (A,\..UNI)
..UNI==..UNI+1>
>
>
DEFINE DEF7 (K,U) <XP M.M7'K'U,1>
DEFINE DEF6 (K,U) <XP M.M6'K'U,1>
;MACRO TO GENERATE A UDB
DEFINE GENUNI(Y,U,EMACR) <
..U'Y'U::! PHASE 0
TUBNAM::! SIXBIT /MT'Y'U/ ;(0) UNIT NAME
TUBKDB::! 0,,MT'Y'KDB ;(1) PNTR TO OWNING KONTROLLERS
TUBADR::! 0,,U ;(2) UNIT ADDRS ON KONTROLLER
TUBAKA::! 0 ;(3) LH = UNIT ADDRS (CURRENT)
; RH = CURRENT KONTROLLER
TUBDDB::! 0 ;(4) PNTR TO DDB'S
TUBCUR::! 0 ;(5) POINTER TO CURRENT DDB
IFDEF M.M7'Y'U,<..X==TUCDR7##> ;7 TRACK TAPE
IFNDEF M.M7'Y'U,< ;NOT 7 TRACK TAPE
IFLE <M.MT'Y'T-K.TMB>,<..X==TUCDR8##> ;TM10 9 TRACK
IFE <M.MT'Y'T-K.TC1>,<..X==TUCDR6##> ;TC10C 800/1600 BPI
IFE <M.MT'Y'T-K.TX1>,<
IFNDEF M.M6'Y'U,<..X==TUCDR6##> ;TU70 800/1600 BPI
IFDEF M.M6'Y'U,<..X==TUCDR5##> ;TU72 1600/6250 BPI
>
IFE <M.MT'Y'T-K.TM2>,<..X==TUCDR6##> ;TM02 800/1600 BPI
IFE <M.MT'Y'T-K.TM2H>,<..X==TUCDR6##> ;RH11/TU45 800/1600 BPI
IFE <M.MT'Y'T-K.DX2>,<
IFNDEF M.M6'Y'U,<..X==TUCDR6##> ;DX20/TU70 800/1600 BPI
IFDEF M.M6'Y'U,<..X==TUCDR5##> ;DX20/TU72 1600/6250 BPI
>
IFE <M.MT'Y'T-K.T78>,<..X==TUCDR5##> ;TM78 1600/6250 BPI
>
TUBCNF::! ;(6) CONFIG INFO (RH)
TUBSTS::!..X+M.MT'Y'T ; UNIT STATUS (LH)
TUBQUE::! 0 ;(7) QUEUE PNTR FOR IORB'S
TUBERR::! 0 ;(10) ERROR RECOVERY INFO
TUBRID::! 0 ;(11) REELID (DAEMON KNOWS ABT THIS AREA)
TUBFIL::! 0 ;(12) # OF FILES FROM BOT
TUBREC::! 0 ;(13) # OF RECORDS FROM EOF
TUBCRD::! 0 ;(14) # CHARS READ SINCE UNLOAD
TUBCWR::! 0 ;(15) # CHARS WRITTEN SINCE UNLOAD
TUBSRE::! 0 ;(16) SOFT READ ERRORS
TUBHRE::! 0 ;(17) HARD READ ERRORS
TUBSWE::! 0 ;(20) SOFT WRITE ERRORS
TUBHWE::! 0 ;(21) HARD WRITE ERRORS
TUBTME::! 0 ;(22) TOTAL MEDIA ERRORS SINCE UNLOAD
TUBCLE==:.-1 ; END OF AREA TO CLEAR
TUBTDE::! 0 ;(23) TOTAL DEVICE ERRORS SINCE RELOAD
TUBTUN::! 0 ;(24) TOTAL UNLOADS
TUBTRY::! 0 ;(25) RETRIES TO RESOLVE ERROR
TUBCCR::! 0 ;(26) CHAR CNT ON LAST REC
TUBPBE::! 0 ;(27) POSITION BEFORE ERROR
; FILE,,RECORD
TUBFES::! 0 ;(30) FINAL ERROR STATE WORD
TPCHMX==:.-TUBRID ; MAX ARG ALLOWED FOR MTACHR UUO
TUBCHR::! 0 ;(31) STATISTICS FOR MTCHR. UUO
TUBDDA::! BLOCK TUBTME-TUBRID+1 ;SHADOW AREA FOR DAEMON
TUBDDE==:.-1 ;END OF SHADOW AREA (DAEMON KNOWS ABT)
TUBPGM::!0 ;PROGRAM NAME ON ERROR
TUBUID::!0 ;PPN USING DRIVE ON ERROR
TUBCNI::! 0 ;ERROR STATUS FOR NEXT RECORD
...X==0
IFE <M.MT'Y'T-K.TX1>,<...X==^D90> ;TU7X REWINDS QUICKLY
IFE <M.MT'Y'T-K.DX2>,<...X==^D90>
IFE <M.MT'Y'T-K.T78>,<...X==^D150> ;TU78S ARE FAIRLY FAST
TUBITM::!...X ;INITIAL VALUE FOR REWIND TIMER
TUBTIM::!0 ;REWIND TIMER
IFN FTTLAB,<
TUBPTR::! 0 ;BYTE POINTER TO FILE.EXT
TUBMSG::! XWD TLMSIZ,.IPCTL## ;LENGTH,,FUNCTION CODE FOR LABEL MESSAGE
TUBPHY::! 0 ;PHYSICAL NAME FOR LABEL PCS
TUBLBL::! ;LABEL STATUS WORD
IFNDEF M.M7'Y'U,<MTDLTP>
IFDEF M.M7'Y'U,<LT.BLP>
TLMSIZ==.-TUBMSG
TUBLIB::! ;START OF LABEL INFORMATION BLOCK
TUBRFM::!0 ;RECORD FORMAT (FOR LABELS ONLY)
TUBRCC::!0 ;RECORD SIZE (FOR LABELS ONLY)
TUBBKL::!0 ;BLOCK SIZE (FOR LABELS ONLY)
TUBEXP::!0 ;EXPIRATION DATE (FOR LABELS ONLY)
TUBPRT::!0 ;PROTECTION (FOR LABELS ONLY)
TUBPSN::!0 ;FILE POSITION #
TUBFNM::!BLOCK <^D17+4>/5 ;17 CHAR (ASCII) FILE NAME
TUBGVR::!0 ;GENERATION + VERSION #
TLPMAX==:.-TUBLIB
>
EMACR(Y) ;GENERATE ERROR INFO BLOCK
DEPHASE
>
;SPECIFIC MACROS FOR VARIOUS CONTROLLERS
IFG M.TM10,<
DEFINE ETMMAC (X) <
TUBIEP::! -2,,TTMICC ;(30) INITIAL ERROR PNTR
TUBFEP::! -2,,TTMFCC ;(31) FINAL ERROR PNTR
TTMICC::! 0 ;LAST ERROR INITIAL CONI MTC
TTMICS::! 0 ;LAST ERROR INITIAL CONI MTS
TTMFCC::! 0 ;LAST ERROR FINAL CONI MTC
TTMFCS::! 0 ;LAST ERROR FINAL CONI MTS
>
DEFINE KTMMAC (X) <
TTMCOC::! CONO MT'X'C,(T1)
TTMCOS::! CONO MT'X'S,(T1)
TTMCIC::! CONI MT'X'C,T1
TTMCIS::! CONI MT'X'S,T1
TTMDOS::! DATAO MT'X'S,T1
TTMDIC::! DATAI MT'X'C,T1
TTMBLK::!
IFE M.MT'X'T,<BLKI MT'X'C,(<BLKO MT'X'C,>)>
IFN M.MT'X'T,<0>
TTMCHE::! 0 ;-1 IF CHANNEL DETECTED ERROR
TTMJSR::!IFN M.MT'X'T,<0> ;JSR FOR TM10A BLKI/O STOP
IFE M.MT'X'T,<JSR MT'X'KDB+TTMEND
TTMEND::! 0 ;HERE AT END OF DATA XFER
CONO MT'X'S,1 ;STOP TAPE
JEN @MT'X'KDB+TTMEND ;DISMISS INTERUPT
> ;;; END IFE M.MT'X'T
> ;;; END DEFINE KTMMAC
> ;;; END IFG M.TM10
IFG M.TX01,<
DEFINE ETXMAC (X) <
TUBIEP::! -^D20,,TTXIST ;(30) INITIAL ERROR PNTR
TUBFEP::! -^D20,,TTXFST ;(31) FINAL ERROR PNTR
TTXIST::! BLOCK ^D19 ;LAST ERROR INITIAL STATUS
TTXISE::! BLOCK 1 ;LAST WRD IN INITIAL STAYS
TTXFST::! BLOCK ^D20 ;LAST ERROR FINAL STATUS
>
DEFINE KTXMAC (X) <
TTXCOS::! CONO MT'X'S,(T1)
TTXCIS::! CONI MT'X'S,T1
TTXDOS::! DATAO MT'X'S,T2
TTXDIS::! DATAI MT'X'S,T2
TTXTMP::! BLOCK 1 ;TEMP LOC FOR DX10
TTXULB::! ;MICROCODE LOADER BLOCK
EXP .BTTX1## ;MICROCODE INDEX
XWD 0,-1 ;DEVICE CODE,,UNIT NUMBER
SIXBIT /TX01/ ;INTERFACE NAME
SIXBIT /DX10/ ;CHANNEL NAME
EXP TX1MVR## ;MINIMUM MICROCODE VERSION
EXP 0 ;DATE/TIME OF LOAD SUCCESS OR FAILURE
EXP 0 ;MICROCODE VERSION
EXP 0 ;POINTER TO MAGIC TABLE
EXP 0 ;MICROCODE LENGTH
EXP 0 ;MICROCODE ADDRESS
CONI 0,T2 ;CONI
CONO 0,(T2) ;CONO
DATAI 0,T2 ;DATAI
DATAO 0,T2 ;DATAO
>
> ;;; END IFG M.TX01
IFG M.TC10,<
DEFINE ETCMAC (X) <
TUBIEP::! -1,,TTCICS ;(30) INITIAL ERROR PNTR
TUBFEP::! -1,,TTCFCS ;(31) FINAL ERROR PNTR
TTCICS::! 0 ;LAST ERROR INITIAL STATUS
TTCFCS::! 0 ;LAST ERROR FINAL STATUS
>
DEFINE KTCMAC (X) <
TTCCOS::! CONO MT'X'S,(T1)
TTCCIS::! CONI MT'X'S,T1
TTCDOS::! DATAO MT'X'S,T1
TTCDIS::! DATAI MT'X'S,T1
>
> ;;; END IFG M.TC10
DEFINE ET2MAC (X) <
TUBIEP::! -16,,TT2ICS
TUBFEP::! -16,,TT2REG
TT2ICS::! BLOCK 16
TT2REG::! BLOCK 16
>
DEFINE KT2MAC (X) <
>
IFG M.TRH1,<
DEFINE ETRMAC (X) <
TUBIEP::! -16,,TRHICS
TUBFEP::! -16,,TRHREG
TRHICS::! BLOCK 16
TRHREG::! BLOCK 16
>
DEFINE KTRMAC (X) <
TRHVEC::!RH21IV ;;-11 STYLE INTERRUPT VECTOR ADDRESS
TRHBAS::!RH21CA ;;ADDRESS OF RH11 CONTROL REGISTER
;; ALL OTHER REGISTERS OFFSET FROM HERE
TRHIVI::!XPCW MT'X'INT ;;INTERRUPT INSTRUCTION
TRHUVA::!0 ;;TEMP LOC FOR READ-BACKWARDS
>
> ;;END IFG M.TRH1
IFG M.DX20,<
DEFINE ED2MAC (X) <
..D2LN==.TD2MC+.TD2ES+.TD2MR ;SIZE OF FEP TABLE FOR DX20
TUBIEP::! -1,,TD2IST ;(30) INITIAL ERROR POINTER
TUBFEP::! -..D2LN,,TD2FST ;(31) FINAL ERROR POINTER
TD2IST::! BLOCK 1 ;PLACE HOLDER (NOT USED BY TD2KON)
TD2FST::! BLOCK ..D2LN ;LAST ERROR FINAL STATUS
>
DEFINE KD2MAC (X) <
TKBIVI::!IFN FTAUTC,<0>
IFE FTAUTC,<
ZZ==4*M.D2'X'T
IFE ZZ-40,<ZZ==0>
744400,,ZZ+3
>
TKBCIS::! CONI MT'X'S,T2
TKBDIS::! DATAI MT'X'S,T2
TKBDOS::! DATAO MT'X'S,T2
TD2COS::! CONO MT'X'S,(T2)
TD2ULB::! ;MICROCODE LOADER BLOCK
EXP .BTTX2## ;MICROCODE INDEX
XWD 0,-1 ;DEVICE CODE,,UNIT NUMBER
SIXBIT /TX02/ ;INTERFACE NAME
SIXBIT /DX20/ ;CHANNEL NAME
EXP TD2MVR## ;MINIMUM MICROCODE VERSION
EXP 0 ;DATE/TIME OF LOAD SUCCESS OR FAILURE
EXP 0 ;MICROCODE VERSION
IFIW TD2MAG## ;POINTER TO MAGIC TABLE
EXP 0 ;MICROCODE LENGTH
EXP 0 ;MICROCODE ADDRESS
CONI 0,T2 ;CONI
CONO 0,(T2) ;CONO
DATAI 0,T2 ;DATAI
DATAO 0,T2 ;DATAO
>
> ;; END IFG M.DX20
IFG M.TM78,<
DEFINE E78MAC (X) <
TUBIEP::! -50,,T78ICS
TUBFEP::! -50,,T78REG
T78ICS::! BLOCK 47
T78ISE::! BLOCK 1 ;LAST WORD IN INITIAL STATISTICS
T78REG::! BLOCK 50
T78ESD::! BLOCK 1 ;TEMP USED DURING ERROR SENSE
T78SNS::! BLOCK 1 ;INDICATES A SENSE IS IN PROGRESS
>
DEFINE K78MAC (X) < >
> ;;END IFG M.TM78
;NOW GENERATE THIS WHOLE MESS
%TM10==0
%DX10==0
%TC10==0
%TM02==0
%TM78==0
IFNDEF TAPTIM,<XP TAPTIM,^D60> ;MAX TIME TO SKIP 10 RECORDS
IFNDEF DSETIM,<XP DSETIM,^D320> ;MAXIMUM TIME TO DO A DATA SECURITY ERASE
IFNDEF NOISE,<XP NOISE,^D12> ;NOISE RECORD LENGTH IN BYTES
IFNDEF MQUANT,<XP MQUANT,^D10> ;CONSECUTIVE RECORDS
XP NOISEW,NOISE/4
IFNDEF TKBICT,<XP TKBICT,2> ;INITIAL FAIRNESS COUNT FOR QUEUED REQUEST
..KON==0 ;INITIATE LOOP
$LOCW==ALLDSK ;FIRST AVAILABLE CHL PNTR
$LOCD==0 ;DX10 CHL PNTR
IFN FTAUTC,<
TAPDST::0
TAPDEN::0
M.MT0==1
M.MT0T==K.TM2
M.MT0U==1
IFN M.TM02,<
MT0DSP==TM2DSP##
EXTERN TM2KON
>
IFE M.TM02,< ;STILL NEED THE KDB, UDB
MT0DSP==0 ; BUT DON'T LOAD TM2KON
>
MT0S==650
TM2KDB::GENKDB(0,KT2MAC)
T2KLEN==:.-TM2KDB
IFN M.TX01,<
M.MT1==1
M.MT1T==K.TX1
MT1DSP==TX1DSP##
EXTERN TX1KON
M.MT1==1
MT1S==650
DX1KDB::GENKDB(1,KTXMAC)
DXKLEN==:.-DX1KDB
>
IFN FTKL10,<
IFN M.DX20,<
M.MT2==1
M.MT2T==K.DX2
MT2DSP=TD2DSP##
EXTERN TD2KON,DX2COM
M.MT2U==1
MT2S==650
TX2KDB::GENKDB(2,KD2MAC)
TXKLEN==:.-TX2KDB
>
IFN M.TM78,<
M.MT3==1
M.MT3T==K.T78
MT3DSP==T78DSP##
EXTERN T78KON
M.MT3U==1
MT3S==650
T78KDB::GENKDB(3,K78MAC)
T8KLEN==:.-T78KDB
>
>
IFE M.TX01,<
DX1KDB==:0
DXKLEN==:0
DX1UDB==:0
DXULEN==:0
DX1CTG==:0
>
IFE M.DX20,<
TX2KDB==:0
TXKLEN==:0
TX2UDB==:0
TXULEN==:0
TX2CTG==:0
>
IFE M.TM78,<
T78KDB==:0
T8KLEN==:0
T78UDB==:0
T8ULEN==:0
T78CTG==:0
>
IFE FTKL10,<
TX2KDB==:0
TXKLEN==:0
T78KDB==:0
T8KLEN==:0
TX2UDB==:0
TXULEN==:0
TX2CTG==:0
T78UDB==:0
T8ULEN==:0
T78CTG==:0
>
TM2UDB::GENUNI(0,0,ET2MAC)
T2ULEN==:.-TM2UDB
TM2CTG==:0
IFN M.TX01,<
DX1UDB::GENUNI(1,0,ETXMAC)
DXULEN==:.-DX1UDB
DX1CTG==:^D20,,TTXFST
>
IFN FTKL10,<
IFN M.DX20,<
TX2UDB::GENUNI(2,0,ED2MAC)
TXULEN==:.-TX2UDB
TX2CTG==:0
>
IFN M.TM78,<
T78UDB::GENUNI(3,0,E78MAC)
T8ULEN==:.-T78UDB
T78CTG==:20,,T78REG+30
>
>
BYTBIT==1_BYTMOD
M.MT0P==0
GENDDB(0,0)
>
IFE FTAUTC,<
TAPDST::.
REPEAT TAPN,<
GENTAP(\..KON) ;DO A CONTROLLER
..KON==..KON+1 ;ADVANCE TO NEXT
>
TAPDEN::.-1
>
;RANDOM BYTE PNTRS INTO DATA STRUCTURE
PMTCRC::POINT 9,TUBCHR(U),26 ;LAST 9TK CRC (NRZI)
PMTNCR::POINT 3,TUBCHR(U),29 ;BYTE RESIDUE OF LAST WORD
PBUFRM::POINT 14,DEVOAD(F),13
;RANDOM STORAGE
IFN FTMP,<
CPUTPQ::0 ;COUNT OF CPUS WAITING FOR SWEEP
>
DIATAP::0 ;NON-0 IF DIAG IN PROGRESS
> ;;;; END OF IFG TAPN
IFE TAPN,< ;;;; GLOBAL DUMMIES
XP TPMCTT,CPOPJ##
XP TAPMIN,CPOPJ##
XP TAPSEC,CPOPJ##
XP UTAPOP,CPOPJ##
XP MTARID,CPOPJ##
XP MTACHR,CPOPJ##
XP TPFREE,CPOPJ##
XP TPMIN,CPOPJ##
XP MTAPE0,CPOPJ##
TPMSIL::JRST CPOPJ1##
XP TDYDN1,0
XP TPKINI,0
XP TUBQUE,0
XP TDVKDB,0
XP TUYKTP,0
XP TKBUDB,0
XP TKBDSP,0
XP TKBCDB,0
XP TKBKDB,0
XP TDVUDB,0
XP NOISEW,0
XP TUC7TK,0
XP TUBDDB,0
XP TUBCNF,0
XP PBUFRM,0
XP TUCD20,0
> ;;; END IFE TAPN
IFE M.TX01,<
TTXCOS::
TTXCIS::JFCL ;DUMMY'S
CCHJGO==:0
TX1TCF==:CPOPJ##
>
IFE M.TM10,<
TTMCIC::
TTMCIS::
TTMCOC::JFCL ;DUMMY'S
>
IFE M.TM02-FTAUTC,<
TT2CO1::
TT2CI2::JFCL
>
IFN M.TRH1,<
TT2CO1::
TT2CI2::JFCL
TKBDIS==:0
TKBDOS==:0
TKBCIS==:0
>
IFE M.TC10,<
TTCCOS::
TTCCIS::JFCL
>
IFE M.TX01+M.TM02+M.DX20+M.TM78,<
TKBDIS==:0
TKBDOS==:0
TKBCIS==:0
>
SUBTTL DECTAPE DATA BASE FOR DTASER
;DECTAPE ENTRY POINT AND BIT DEFINITIONS
SAVN==1 ;OLD FORMAT DECTAPE SYSTEMS NO LONGER SUPPORTED BY DEC.
; MONGEN NO LONGER ASKS THE DECTAPE FORMAT QUESTIONS.
IFG M.DTXN, <EXTERN DTASER> ;TD10 WITH NEW FORMAT
;DEFINE SAVE MODE AND EXTENSION FOR OLD OR NEW FORMAT
IFN SAVN, <
SAVDMP==:<SIXBIT / SAV/> ;EXTENSION FOR SAVED FILES == "SAV"
>
IFE M.DTXN,<
;IF NO DECTAPES, SATISFY GLOBALS BY DEFINING DUMMIES
DTASEC==:CPOPJ##
DTADDB==:CPOPJ## ;THIS WORKS BECAUSE SYSINI DOES A MOVEI W,DTADDB##
DTXINI==:0 ; FOLLOWED BY AN XCT DTXINI##(W)
DSCON==:0
LVFLAG==:0
USEWRD==:0
DCONS==:0
DTADSP==:0
OWNDTC==:CPOPJ##
SCDDT==:CPOPJ##
DTXFRE==:CPOPJ##
$HIGH
UNWDTC::
SETZ T3,
POPJ P,
$LOW
>
DEFINE DTDDB(X,Y,CPUN)<
SUBTTL INTERRUPT HEAD FOR DT'X
;FLAGS LEVEL CODE
;CONTROL DEPENDENT PORTION OF DECTAPE SERVICE
DEFINE CDC (C,B) <
C=:.-DT'X'DDB ;RELATIVE LOCATION WITHIN CONTROL BLOCK
B>
;MODEL DEVICE DATA BLOCK
DTXDDB=:.-DT'X'DDB
DT'X'DDB::SIXBIT /DT'X'0/ ;(0) - DEVNAM
XWD <^D6*HUNGST>,200 ;(1) - DEVCHR
0 ;(2) - DEVIOS
EXP DTADSP## ;(3) - DEVSER
XWD 1107,154403 ;(4) - DEVMOD
0 ;(5) - DEVLOG
0 ;(6) - DEVBUF
0 ;(7) - DEVIAD
0 ;(10) - DEVOAD
0 ;(11) - DEVSTS
XWD .TYDTA,0 ;(12) - DEVSTA
0 ;(13) - DEVXTR
0 ;(14) - DEVEVM
0 ;(15) - DEVPSI
0 ;(16) - DEVESE
0 ;(17) - DEVHCW
BYTE (3)CPUN(33)0 ;(20) - DEVCPU
0 ;(21) - DEVISN
0 ;(22) - DEVJOB
0 ; - DEVFIL
0 ; - DEVEXT
0 ; - FSTBLK
DT'X'DIR+DT'X'DDB ; - DLOC
0 ; - IBLK
0 ; - OBLK
0 ; - DISPAD
0 ; - DMPLST
0 ; - SVDWRD
0 ; - DJOTOP
0 ; - DJOBOT
0 ; - BADCOM
DT'X'DIR==:.-DT'X'DDB
BLOCK 200
XP DT'X'DDS,.-DT'X'DDB
;DATA LEVEL CODE...CHANNEL 1 OR 2 USUALLY
D'X'DINT::CONSO DAS,1 ;DATA INTERRUPT FOR THIS CONTROL?
JRST . ;NO- PROCEED DOWN CHAIN
SKIPN DT'X'USE ;EXPECTING AN INTERRUPT?
JRST D'X'DINT+1 ;NO, IGNORE IT
SKIPE D'X'DSRC ;ARE WE SEARCHING FOR BLOCK NUMBERS?
JRST D'X'SRCH ;YES
D'X'IOWD:BLKI DAC,DT'X'PNT ;EXECUTE BLKI OR BLKO FOR THIS UNIT
JRST D'X'DTHR ;POINTER RAN OUT
D'X'DCTN:JFCL ;GOING REVERSE?
XJEN D'X'DCHL##
SOS DT'X'PNT ;YES- DECREMENT POINTER
SOS DT'X'PNT ;TWICE
XJEN D'X'DCHL##
D'X'DTHR:SKIPE D'X'DDMP ;DUMP MODE POINTER RAN OUT?
JRST D'X'DMPA ;YES- ADVANCE POINTER
D'X'DFNS:CONO DAS,770001 ;SEND OUT FUNCTION STOP IF THROUGH
XJEN D'X'DCHL##
D'X'DSRC:CDC DTXSRC,0 ;SET NEGATIVE WHEN READING BLOCK NUMBERS
;HERE WHEN READING BLOCK NUMBERS AT DATA INTERRUPT LEVEL
D'X'SRCH:JSR D'X'DSAV## ;SAVE ACS
D'X'CCNC:CONI DAC,W ;READ FLAGS REGISTER
HRLZS W ;PUT MOST FLAGS INTO LEFT HALF
HRRI W,DT'X'DDB ;POINT TO THIS CONTROL BLOCK
JRST SRCH## ;DO THE SEARCH
D'X'DMPA:JSR D'X'DSAV## ;SAVE ACS
HRRZI W,DT'X'DDB ;POINT TO CONTROL A
JRST DMPADV## ;PROCESS THE EXHAUSTED BLKI/O
XP DTSFNS,D'X'DFNS-DT'X'DDB
XP DXDINT,D'X'DINT-DT'X'DDB
XP DXIOWD,D'X'IOWD-DT'X'DDB
XP DXDCTN,D'X'DCTN-DT'X'DDB
D'X'CNUM:CDC DXCNUM,<<DAC>B11>;CONTROL NUMBER
XP DTXCNC,D'X'CCNC-DT'X'DDB
;FLAGS LEVEL INTERRUPT HEAD...
DT'X'INT::CONSO DAS,770000 ;INTERRUPT FOR THIS CONTROL?
JRST . ;NO- PROCEED DOWN CHAIN
SKIPN DT'X'USE
JRST DT'X'INT+1
JSR DT'X'SAV## ;YES- SAV ACCUMULATORS FOR THIS LEVEL
CDC DXCCNT,<CONI DAC,T1>;READ FLAGS INTO T1
CDC DTSCNI,<CONI DAS,T4>;READ STATUS INTO T4
HRLZI W,(T1) ;PUT FLAGS (RH) INTO W (LH)
HRRI W,DT'X'DDB ;ADDRESS OF CONTROL DEPENDANT BLOCK
JRST DTXINT## ;TO NON-CONTROL DEPENDANT SECTION
CDC DTSCN2,<CONI DAS,T1>;STATUS REGISTER INTO T1
;CONSTANTS REQUIRED FOR EACH CONTROL...
CDC BFPNTR,<IOWD 200,D'X'BUF+1>
DT'X'USE:CDC USEWRD,0
CDC ADRPRG,0
DT'X'PNT:CDC PNTR,0
CDC DISTNC,0
CDC BLOCK,0
CDC QUANTM,0
CDC DSCON,0
CDC RVERS,0
CDC ERRCNT,0
CDC FNDTMP,0
CDC IOWRIT,0
CDC TURNCT,0
CDC BLKWRD,0
CDC LVFLAG,0
CDC BLKCNT,0
CDC SVPNTR,0
CDC USPNTR,0
CDC DIRCTN,0
DT'X'BUF=.-DT'X'DDB
D'X'BUF:CDC BUF,<BLOCK 200> ;A CONTROL MONITOR BUFFER
CDC DTXCON,<CONO DAC,(T1)> ;CONDITIONS OUT - A CONTROL A
CDC DTXSTP,<CONO DAC,400000> ;STOP SELECTED TAPE
CDC DTXTRN,<CONO DAC,DTTURN##> ;TURN SELECTED TAPE AROUND
CDC DTSCO2,<CONO DAS,2(T4)>
CDC DTSENJ,<CONO DAS,670000> ;ENABLE JOB DONE
CDC DTXREQ,-1 ;# OF WAITERS
CDC DTXWAT,0 ;REQUEST INTERLOCK FOR THIS CONTROL
D'X'DDMP:CDC DTXDMP,0 ;SET TO -1 WHEN READING IN DUMP MODE
XP DTXIOG,.-DT'X'DDB
CONO DAC,DTBOTH##(T2) ;START UP DECTAPE
CONO DAS,770000 ;ENABLE INTERRUPT CONDITIONS
POPJ P, ;RETURN
CDC DTXSF,<CONSZ DAC,100000> ;SKIP IF GOING FORWARD
CDC DTXDSL,<CONO DAC,410000> ;STOP AND DESELECT TAPE
CDC DTXDST,<CONO DAC,10000> ;DESELECT TAPE
CDC DTXSTO,<CONO DAC,430000(T1)> ;STOP AND DESELECT
CDC DTXTR2,<CONO DAC,230200(T1)> ;TURN TAPE, SEARCH FOR BLOCKS
CDC DTXINI,<CONO DAC,0> ;SHUT DOWN CONTROL
CDC DTXDTI,<DATAI DAC,T1> ;READ A BLOCK NUMBER
XP DCONS,.-DT'X'DDB
>;END DEFINE DTDDB
DEFINE GENDTA(CPU,CPUN)<
ZZZZ==0
REPEAT M'CPU'TD10,<
IFE ZZZZ&1,<DAC==320>
IFN ZZZZ&1,<DAC==330>
DAS==DAC+4
DTDDB (\"ZZZ,\<ZZZ&7>,CPUN)
ZZZ==ZZZ+1
ZZZZ==ZZZZ+1
>;END REPEAT M'CPU'TD10
>;END DEFINE GENDTA
ZZ==0
ZZZ=="A"
REPEAT M.CPU,<
GENDTA (\ZZ,ZZ)
ZZ==ZZ+1
>;END REPEAT M.CPU
KONEND:: ;END OF KONTROLLER DATA BLOCKS
;DDB MAGIC CELLS
FSTBLK==:DEVPPN
DLOC==:FSTBLK+1 ;LH==BLOCK# DURING DEAD RECKONING,RH==ADDRESS OF DIR
IBLK==:FSTBLK+2 ;LH==INDEX OF INPUT FILE(1-27),RH==BLOCK# TO READ NEXT
OBLK==:FSTBLK+3
DISPAD==:FSTBLK+4
DMPLST==:FSTBLK+5
SVDWRD==:FSTBLK+6
DJOTOP==:FSTBLK+7
DJOBOT==:FSTBLK+10
BADCOM==:FSTBLK+11
SUBTTL Database for RX20s on 2020s
IFN FTKS10&M.RX20,<
EXTERN RX2SER ;Load device driver
;Macro to define prototype DDB for each RX20 CTLlr (RXA,RXB,...)
DEFINE RX2DDB(x,CPU),<
RX'x'INT::EXP 0,0,IC.UOU,.+1 ;Vectored interrupts XPCW here
EXCH T1,RX'x'INT ;Get interrupt PC
MOVEM T1,RX'x'CHL## ;Save for RESn
MOVE T1,RX'x'INT+1 ;;Second word of PC
MOVEM T1,RX'x'CHL##+1 ;;...
MOVE T1,RX'x'INT ;Restore state
JSR RX'x'SAV## ;Save ACs
JSP F,RX2INT## ;Set up F and join RX2SER
RX'x'DDB::PHASE 0
EXP <SIXBIT/RX'x'0/> ;(0) DEVNAM for prototype DDB this CTL
XWD <^D5*HUNGST>,201 ;(1) DEVCHR
EXP 0 ;(2) DEVIOS
EXP RX2DSP## ;(3) DEVSER
XWD DVLNG!DVIN!DVOUT,^D<1B<35-I>> ;(4) DEVMOD
EXP 0 ;(5) DEVLOG
EXP 0 ;(6) DEVBUF
EXP 0 ;(7) DEVIAD
EXP 0 ;(10) DEVOAD
EXP 0 ;(11) DEVSTS
XWD DEPLEN!.TYRX2,DEPEVM ;(12) DEVSTA
EXP 0 ;(13) DEVXTR
EXP 0 ;(14) DEVEVM
EXP 0 ;(15) DEVPSI
EXP 0 ;(16) DEVESE
EXP 0 ;(17) DEVHCW - Hard errors,,Soft errors
BYTE (3)CPU(33)0 ;(20) DEVCPU
EXP 0 ;(21) DEVISN (Must leave space)
EXP 0 ;(22) DEVJOB
EXP 0 ;(23) DEVFIL
EXP 0 ;(24) DEVEXT
EXP 0 ;(25) DEVPPN
DEVRXO::!EXP 0 ;(26) DEVRXO
DEVRXI::!EXP 0 ;(27) DEVRXI
DEVRXQ::!EXP 0,0,0,0 ;(30) DDB and CSR queue element
RX'x'DDS::! ;End of device DDB
DEVRXS::!EXP 0 ;DEVRXS ;Start of CTL data
DEVRXV::!EXP RX21IV+<<"x"-"A">*4> ;Interrupt vector
DEVRXC::!EXP RX21BA+<<"x"-"A">*10> ;CSR address
DEVRXM::!EXP RX2IMR##+<<"x"-"A">*2> ;UBA mapping reg addr (2 slots/RX)
DEVRXE::!EXP RX2IEA##+<<"x"-"A">*UBAMUL> ;11 address of mapped buffer
DEVRXJ::!XPCW RX'x'INT ;Instruction to set up vector table with
Dephase
>;End of define RX2DDB
DEFINE GENRX2(CPU,CPUN)<
ZZZZ==0
REPEAT M'CPU'RX20,<
RX2DDB (\"ZZZ,CPUN)
ZZZ==ZZZ+1
ZZZZ==ZZZZ+1
>;;End repeat
>;End define
ZZ==0
ZZZ=="A"
REPEAT M.CPU,<
GENRX2 (\ZZ,ZZ)
ZZ==ZZ+1
>;End repeat
>;End FTKS10&M.RX20
SUBTTL MACRO TO GENERATE UNIT RECORD EQUIPMENT DDBS
DEFINE GENDDS(DEV,DV)<
$CPNNN==0
$'DV'NUM==0
REPEAT M.CPU,<
$'DEV'NM==0
GENDDB(DEV,DV,\$CPNNN,$CPNNN)
$CPNNN==$CPNNN+1
>
>
DEFINE GENDDB(DEV,DV,CPU,N)<
REPEAT M'CPU'DEV,<
EXTERN DEV'SER
DEV'DDB \$'DV'NUM,\$'DEV'NM,CPU,N
$'DV'NUM==$'DV'NUM+1
$'DEV'NM==$'DEV'NM+1
>
>
SUBTTL CARD READER DDB DEFINITIONS
IFE FTKS10,<IFG CDRN,<
DEFINE CDRDDB (N,P,CPU,CPUN) <
XLIST
CDR2==154 ;DEVICE SELECTION CODE FOR SECOND CDR
IFNDEF CR'CPU'0,<CR'CPU'0==CR> ;DEFINE STANDARD MNEMONIC DEFINITIONS
IFNDEF CR'CPU'1,<CR'CPU'1==CDR2> ; BUT ALLOW FOR OVERRIDE
CR'N==CR'CPU'P
CR'N'SV1==CR'N'SAC##+F ;DEFINE F SAVE LOCATION
CDRCON==:.-CR'N'DDB
CR'N'INT::CONSO CR'N,0 ;(-4) SKIP IF INTERRUPT FOR THIS READER
JRST .-1 ;(-3) NOT HERE, CONTINUE DOWN THE CHAIN
MOVEM F,CR'N'SV1 ;(-2) SAVE F IN CHANNEL SAVE AREA
JSP F,CDRINT## ;(-1) SET F TO DDB ADDRESS AND SERVICE INTERRUPT
CR'N'DDB::
CR'N'NAM: CRNAM=SIXBIT/CDR/
IFE CDRN+DCDRN-1,<CRNAM> ;(0) PHYSICAL DEVICE NAME
IFN CDRN+DCDRN-1,<CRNAM+<20+$CRNUM>B23> ;(0) PHYSICAL DEVICE NAME
XWD 2*HUNGST, ;(1) DEVICE CHARACTERISTICS
CDRIOS==:.-CR'N'DDB
0 ;(2) DEVIOS
CDRDSP## ;(3) LH=DDB LINK, RH=CDR DISPATCH TABLE
XWD DVCDR+DVIN,14403;(4) DEVICE CHARACTERISTICS
0 ;(5) LOGICAL DEVICE NAME (DEVLOG)
0 ;(6) BUFFER HEADER ADDRESSES
CDRIAD==:.-CR'N'DDB
0 ;(7) ADDRESS OF CURRENT INPUT BUFFER
CDRPTR==:.-CR'N'DDB
0 ;(10) BYTE POINTER TO CURRENT INPUT BUFFER
CDRSTS==.-CR'N'DDB
CR'N'STS: 0 ;(11) LATEST CONI STATUS BITS
XWD .TYCDR!.SPCDR,0 ;SPOOLED CDR
0 ;DEVXTR
0 ;DEVEVM
0 ;DEVPSI
0 ;DEVESE
1B11 ;DEVHCW (BA10)
BYTE (3)CPUN(33)0 ;DEVCPU
0 ;DEVISN
<N>B17 ;UNIT+DEVJOB
CDRCTR==:.-CR'N'DDB
0 ;BYTE COUNTER FOR IDPB'S INTO USER'S BUFFERS
CDRCHK==:.-CR'N'DDB
0 ;CHECK SUM OF CURRENT INPUT BINARY CARD
CDRCNT==:.-CR'N'DDB
0 ;# OF CARDS READ
CDRADR==:.-CR'N'DDB
0 ;USER'S JOBDAT ADDRESS
CDRCOL==:.-CR'N'DDB
CF'N'CHN##-CR'N'CHN## ;COLUMN COUNT ON CURRENT CARD
CDRSUP==:.-CR'N'DDB ;BLKI POINTER TO USER'S BUFFER
CR'N'SUP: 0 ; FOR SUPER IMAGE MODE INPUT
CDRMIS==:.-CR'N'DDB
0 ;FLAG =-1 IF MISSED DATA ON CURRENT CARD
CDRSPU==:.-CR'N'DDB ;COUNT OF SPURIOUS END-OF-CARD FLAGS
0 ; TO CHECK ON POSSIBLE HARDWARE PROBLEM
CDRSV2==:.-CR'N'DDB
0 ;SAVE LOCATION FOR U
CDRCH==:.-CR'N'DDB
EXP CR'N'CHN##
CDRBKI==:.-CR'N'DDB
BLKI CR'N,CR'N'SUP
CDRCNO==:.-CR'N'DDB
CONO CR'N,(U)
CDRCSO==:.-CR'N'DDB
CONSO CR'N,(U)
CDRCSZ==:.-CR'N'DDB
CONSZ CR'N,(U)
CDRDTI==:.-CR'N'DDB
DATAI CR'N,U
CDRRDY==:.-CR'N'DDB
CONSO CR'N,IDRDY## ;SKIP IF DATA READY
CDRRTR==:.-CR'N'DDB
CONSZ CR'N,NOTRDY## ;SKIP IF READY TO READ
CDRSVE==:.-CR'N'DDB
CR'N'SVE: 0 ;ROUTINE TO SAVE AC'S
MOVE F,CR'N'SV1 ;RESTORE F
JSR CR'N'SAV## ;SAVE AC'S AND ESTABLISH P
MOVEI F,CR'N'DDB ;SET UP DDB ADDRESS
JRST @CR'N'SVE ;AND RETURN
CDREX1==:.-CR'N'DDB
MOVE F,CR'N'SV1 ;RESTORE F
XJEN CR'N'CHL##
CRFCON==:.-CR'N'DDB
CF'N'INT::CONSO CR'N,0 ;SKIP IF CDR FLAG
JRST .-1 ;NOT THIS, CONTINUE DOWN SKIP CHAIN
JSR CF'N'SAV## ;SAVE AC'S
MOVEI F,CR'N'DDB ;SET UP F
JRST CRFINT## ;AND SERVICE INTERRUPT
CRXSTS==:.-CR'N'DDB
CONI CR'N,CR'N'STS
LIST
> ;END DEFINE CDRDDB
GENDDS CDR,CR
> ;END IFG CDRN
IFG DCDRN, < ;ONLY NEED THIS IF FRONT-END CARD READERS
DEFINE DCRDDB (CPUN,N,U,D) <
FC'N'DDB::
CRNAM==SIXBIT/CDR/
IFE CDRN+DCDRN-1,<CRNAM> ;(0) DEVNAM
IFN CDRN+DCDRN-1,<CRNAM+<20+$CRNUM>B23> ;(0) DEVNAM
XWD 2*HUNGST, ;(1) DEVCHR
0 ;(2) DEVIOS
DCRDSP## ;(3) LH=DDB LINK, RH=DISPATCH TABLE
XWD DVCDR+DVIN,14403 ;(4) DEVMOD
0 ;(5) DEVLOG
0 ;(6) DEVBUF
0 ;(7) DEVIAD
0 ;(10) DEVPTR
0 ;(11) DEVSTS
XWD .TYCDR!.SPCDR,0 ;(12) DEVSPL
0 ;(13) DEVXTR
0 ;(14) DEVEVM
0 ;(15) DEVPSI
0 ;(16) DEVESE
EXP 3B11 ;(17) DEVHCW (CD20)
BYTE (3)CPUN(33)0 ;(20) DEVCPU
0 ;(21) DEVISN
<N>B17 ;(22) PUNIT+DEVJOB
0 ;(23) DEVCTR
DCRDUX==:.-FC'N'DDB
XWD U,D ;(24) LINE NUMBER,,DTE INDEX
CDRCNT==:.-FC'N'DDB
0 ;(25) CARD COUNT
DCRBUF==:.-FC'N'DDB
BLOCK ^D40 ;(26) BUFFER FOR READING A CARD
>
EXTERN DCRSER
DEFINE RSXDTE (C,D) <
$CRUNT==0
REPEAT M'C'CR'D'N,<
DCRDDB \C,\<$CRNUM-CDRN>,$CRUNT,$DTNDX
$CRUNT==$CRUNT+1
$CRNUM==$CRNUM+1
>
$DTNDX==$DTNDX+1
>
$CRNUM==CDRN ;START NUMBERING DCB'S AT CDRN
$DTNDX==0 ;DTE INDEX STARTS AT 0
RSX20F ;GENERATE THE FRONT END READER DDB'S
> ;END IFN DCDRN
IFN FTKL10,<
IFE M.DCR,<
FCRDSP==:EATDSP## ;IGNORE CDR MESSAGES
> ;END M.DLP
> ;END FTKL10
> ;END IFE FTKS10
IFN FTKS10,<
IFN CDRN,<
DEFINE CDRDDB (N) <
XLIST ;TURN OFF LISTING DURING EXPANSION
CR'N'INT::0 ;INTERRUPT JSR'S TO HERE
EXP 0,IC.UOU,.+1 ;XPCW BLOCK
EXCH T1,CR'N'INT ;GET INTERRUPT PC
MOVEM T1,CR'N'CHL## ;PUT INTO -10 STYLE INTERRUPT HANDLER
MOVE T1,CR'N'INT+1 ;SECOND WORD
MOVEM T1,CR'N'CHL##+1 ;XJEN
MOVE T1,CR'N'INT ;AND RESTORE T1
JSR CR'N'SAV## ;SAVE AC'S
JSP F,CDRINT## ;SET UP F AND GO TO INTERRUPT CODE
CR'N'DDB::PHASE 0
CRNAM==SIXBIT/CDR/
IFE CDRN-1,<CRNAM> ;(0) DEVNAM
IFN CDRN-1,<CRNAM+<20+$CRNUM>B23>
XWD 2*HUNGST,0 ;(1) DEVCHR
0 ;(2) DEVIOS
CDRDSP## ;(3) DEVSER
XWD DVCDR+DVIN,14403 ;(4) DEVMOD
0 ;(5) DEVLOG
0 ;(6) DEVBUF
XWD R,0 ;(7) DEVIAD (DEVADR)
0 ;(10) DEVOAD (DEVPTR)
0 ;(11) DEVSTS
XWD .TYCDR!.SPCDR,0 ;(12) DEVSTA
0 ;(13) DEVXTR
0 ;(14) DEVEVM
0 ;(15) DEVPSI
0 ;(16) DEVESE
EXP 3B11 ;(17) DEVHCW
BYTE (3)CPUN(33)0 ;(20) DEVCPU
0 ;(21) DEVISN
0 ;(22) DEVJOB
0 ;(23) DEVCTR
CDRCHK::!0 ;CHECKSUM OF CURRENT INPUT BINARY CARD
CDRCNT::!0 ;# OF CARDS READ
CDRDAP::!0 ;PLACE TO BUILD AOBJN POINTER TO CDRDAE
CDRDAE::!BLOCK 11 ;SYSERR BLOCK
CDRVEC::!CDRIVT ;-11 STYLE INTERRUPT VECTOR ADDRESS
CDRBAS::!CD11BA ;CD20 BASE DEVICE ADDRESS
CDRIVI::!XPCW CR'N'INT ;INTERRUPT INSTRUCTION FOR THIS CDR
CDRCDB::! CHNMAC(\M.CD'N'C) ;POINTER TO CHANNEL DATA BLOCK
CDRBUF::!BLOCK ^D40 ;INTERNAL BUFFER FOR ONE CARD
DEPHASE
LIST
>;END DEFINE CDRDDB
EXTERNAL CD2SER ;HAUL IN THE SERVICE ROUTINE
$CRNUM==0 ;CDR NUMBER SYMBOL
IFG CDRN-1,<PRINTX KS10 MONITOR DOES NOT SUPPORT MORE THAN ONE CDR>
REPEAT CDRN,<
CDRDDB \$CRNUM
$CRNUM==$CRNUM+1
>
>;END IFG CDRN
>;END IFN FTKS10
SUBTTL CARD READER TRANSLATION TABLES
;IF THERE ARE REMOTE OR LOCAL READERS, CERTAIN BYTE POINTERS
; AND THE CHARACTER TRANSLATION TABLES MUST BE DEFINED.
IFN CDRN+DCDRN+M.RCDR,<
XP PCDRAS,700 ;ASCIZ BYTE POINTER
XP PCDRBI,1400 ;BINARY AND IMAGE BYTE POINTER
XP PCDRSI,4400 ;SUPER IMAGE BYTE POINTER
;THE CHARACTER TRANSLATION TABLES:
$HIGH
CRCVPT::XWD 350700+T2,CRCVTB
XWD 260700+T2,CRCVTB
XWD 170700+T2,CRCVTB
XWD 100700+T2,CRCVTB
;CODE CONVERSION FOR THE 029 KEYPUNCH
;THE FOLLOWING EQUIVALENCES ARE ARTIFICIALLY DEFINED
;029 KEYTOP ;ASCII 35 ;ASCII 37
;CENT [ [
;0-8-2 ] ]
;VERT BAR ^ HAT = L.C. VERT BAR
;UNDERBAR _ UNDERBAR
;NEGATION \ TILDE = L.C. NEGATION
;CHARACTERS ;ZONE/DIGITS
CRCVTB: ASCII / 123/ ;N/N-3
ASCII .0/ST. ;0/N-3
ASCII /-JKL/ ;11/N-3
ASCII /HI[./ ;12,8/N-3
ASCII /&ABC/ ;12/N-3
ASCII /QR]$/ ;11,8/N-3
ASCII /YZ\,/ ;0,8/N-3
ASCII /89:#/ ;8/N-3
ASCII /4567/ ;N/4-7
ASCII /UVWX/ ;0/4-7
ASCII /MNOP/ ;11/4-7
ASCII /<(+!/ ;12,8/4-7
ASCII /DEFG/ ;12/4-7
ASCII /*);^/ ;11,8/4-7
ASCII /%_>?/ ;0,8/4-7
ASCII /@'="/ ;8/4-7
;CODE FOR THE 026 KEYPUNCH A LA H HYMAN
ASCII / 123/ ;N/N-3
ASCII .0/ST. ;0/N-3
ASCII /-JKL/ ;11/N-3
ASCII /HI?./ ;12,8/N-3
ASCII /+ABC/ ;12/N-3
ASCII /QR:$/ ;11,8/N-3
ASCII /YZ;,/ ;0,8/N-3
ASCII /89_=/ ;8/N-3
ASCII /4567/ ;N/4-7
ASCII /UVWX/ ;0/4-7
ASCII /MNOP/ ;11/4-7
ASCII /)]<!/ ;12,8/4-7
ASCII /DEFG/ ;12/4-7
ASCII /*[>&/ ;11,8/4-7
ASCII /("#%/ ;0,8/4-7
ASCII /@^'\/ ;8/4-7
$LOW
> ;END OF IFN RCDRN+M.RCDR
SUBTTL CARD PUNCH DDB DEFINITIONS
IFG CDPN, <
DEFINE CDPDDB (N,P,CPU,CPUN) <
XLIST
IFNDEF CP'CPU'0,<CP'CPU'0==CDP>
CP'N=CP'CPU'P
CP'N'SV1==CP'N'SAC##+F ;DEFINE F SAVE LOCATION
CDPCON==:.-CP'N'DDB
CP'N'INT::CONSO CP'N,0 ;(-4) SKIP IF INTERRUPT FOR THIS READER
JRST .-1 ;(-3) NOT HERE, CONTINUE DOWN THE CHAIN
MOVEM F,CP'N'SV1 ;(-2) SAVE F IN CHANNEL SAVE AREA
JSP F,CDPINT## ;(-1) SET F TO DDB ADDRESS AND SERVICE INTERRUPT
CP'N'DDB::
CP'N'NAM: CDPNAM=SIXBIT/CDP/
IFE CDPN-1,<CDPNAM> ;(0) PHYSICAL DEVICE NAME
IFN CDPN-1,<CDPNAM+<20+$CPNUM>B23> ;(0) PHYSICAL DEVICE NAME
XWD 4*HUNGST,41 ;(1) CODE 4 - HUNG TIME IS 15 SECONDS
CDPIOS==:.-CP'N'DDB
0 ;(2) DEVIOS
CDPDSP## ;(3) LH=DDB LINK, RH=CDP DISPATCH TABLE
XWD DVCDR+DVOUT,14403 ;(4) DEVICE CHARACTERISTICS
0 ;(5) LOGICAL DEVICE NAME (DEVLOG)
CDPBUF==:.-CP'N'DDB
0 ;(6) BUFFER HEADER ADDRESSES
CDPNTR==:.-CP'N'DDB
0 ;(7) BYTE POINTER TO CURRENT OUTPUT BUFFER
CDPOAD==:.-CP'N'DDB
0 ;(10) ADDRESS OF CURRENT OUTPUT BUFFER
CDPSTS==.-CP'N'DDB
CP'N'STS: 0 ;(11) LATEST CONI STATUS BITS
XWD .TYCDP!.SPCDP,0 ;SPOOLABLE, PUNCH
0 ;DEVXTR
0 ;DEVEVM
0 ;DEVPSI
0 ;DEVESE
3B11 ;DEVHCW (LP20)
BYTE (3)CPUN(33)0 ;DEVCPU
0 ;DEVISN
<N>B17 ;PUNIT+DEVJOB
CDPCTR==:.-CP'N'DDB
0 ;BYTE COUNTER FOR ILDB'S FROM USER'S BUFFERS
CDPCNT==:.-CP'N'DDB
0
CDPOCT==:.-CP'N'DDB
0
CDPOPT==:.-CP'N'DDB
0
CDPTMP==:.-CP'N'DDB
CG'N'CHN##-CP'N'CHN##
CDPECT==:.-CP'N'DDB
0
CDPFCD==:.-CP'N'DDB
0
CDPFCT==:.-CP'N'DDB
0
CDPCCT==:.-CP'N'DDB
0
CDPSVJ==:.-CP'N'DDB
0
CDPSVT==:.-CP'N'DDB
0
CDPEOC==:.-CP'N'DDB
0
CDPBNB==:.-CP'N'DDB
EXP 50000
CDPBUF==:.-CP'N'DDB
BLOCK 33
CDPCH==:.-CP'N'DDB
EXP CP'N'CHN## ;CDP PIA
CDP10D==:.-CP'N'DDB
EXP M'CPU'CP1D ;1 IF CP10D, 0 IF CP10A
CDPCNO==:.-CP'N'DDB
CONO CP'N,(U)
CDPOAT==:.-CP'N'DDB
CONSO CP'N,474000 ;CHECK FOR TROUBLE
CDPZTE==:.-CP'N'DDB
CONSZ CP'N,4100 ;EOC OR TROUBLE?
CDPZPE==:.-CP'N'DDB
CONSZ CP'N,1000 ;PUNCH ERROR?
CDPZTB==:.-CP'N'DDB
CONSZ CP'N,CI.TRB## ;TROUBLE?
CDPZER==:.-CP'N'DDB
CONSZ CP'N,CI.ERR## ;ERROR?
CDPZCP==:.-CP'N'DDB
CONSZ CP'N,CI.CIP## ;CARD IN PUNCH?
CDPOTN==:.-CP'N'DDB
CONSO CP'N,470000 ;TROUBLE BUT DON'T RESET BUFFERS?
CDPOER==:.-CP'N'DDB
CONSO CP'N,CI.ERR## ;ERROR?
CDPDOU==:.-CP'N'DDB
DATAO CP'N,U
CDPDFC==:.-CP'N'DDB
DATAO CP'N,CDPFCD(F)
CDPDSV==:.-CP'N'DDB
DATAO CP'N,SEVENS##
CDPEX1==:.-CP'N'DDB
MOVE F,CP'N'SV1 ;RESTORE F
XJEN CP'N'CHL##
CPFCON==:.-CP'N'DDB
CG'N'INT::CONSO CP'N,0 ;SKIP IF CDP FLAG
JRST .-1 ;NOT THIS, CONTINUE DOWN SKIP CHAIN
JSR CG'N'SAV## ;SAVE ACS
MOVEI F,CP'N'DDB ;SETUP F
JRST CPFINT## ;AND SERVICE INTERRUPT
CPFCH==:.-CP'N'DDB
EXP CG'N'CHN##
CDPXSTS==:.-CP'N'DDB
CONI CP'N,CP'N'STS
LIST
>;END CDPDDB
GENDDS CDP,CP
>;END IFG CDPN
SUBTTL DK10 BITS AND DDB DEFINITIONS
;-------DK10 BITS
RTC== 070 ;DEVICE ASSIGNMENT
;CONO BITS
DK.OSO==1B23 ;SET COUNT OVERFLOW
DK.OCO==1B31 ;CLEAR COUNT OVERFLOW
DK.OSD==1B24 ;SET DONE
DK.OCD==1B32 ;CLEAR DONE
DK.OSU==1B28 ;SET USER TIME
DK.OCU==1B27 ;CLEAR USER TIME
DK.OON==1B30 ;TURN CLOCK ON
DK.OOF==1B29 ;TURN CLOCK OFF
DK.OIC==1B25 ;INCREMENT CLOCK(IF OFF)
DK.OCC==1B26 ;CLEAR CLOCK(COUNTER,DONE,OVF.,USER,PIA)
;CONI BITS
DK.IO== 1B31 ;OVERFLOW FLAG (INTERRUPT)
DK.ID== 1B32 ;DONE FLAG (INTERRUPT)
DK.IU== 1B28 ;USER TIME
DK.ION==1B30 ;CLOCK ON
DK.IXS==1B26 ;EXTERNAL SOURCE
;PROTOTYPE DK10 DDB
DEFINE RTCDEF(N),<
RTCNUM==RTCNUM+M.RT'N
XP C'N'RTC,0
IFG M.RT'N,<XP C'N'RTC,RT'N'DDB>
XP C'N'RTD,0
>
RTCNUM==0
ZZ==0
REPEAT M.CPU,<
RTCDEF \ZZ
ZZ==ZZ+1
>
DEFINE RTCDDB (N,DEVCOD)<
RT'N'SVF==RT'N'SAC##+F ;DEFINE SAVE LOC. FOR F
RT'N'SVT==RT'N'SAC##+T1 ;SAVE LOC. FOR T1
RT'N==:DEVCOD ;DEFINE DEVICE CODE
RT'N'DTI==:(DATAI RT'N,) ;DATAI FOR EXTERNAL USE (E.G. RT'N'DTI##,,ADDR)
;---- INITIALIZATION ROUTINE (JSR RTCINI(F))
RT'N'INI: 0
CONO RT'N,DK.OCC ; CLEAR THE CLOCK
DATAO RT'N,RT'N'PRD ; SET PERIOD
CONO RT'N,DK.OON+RT'N'CHN## ; & START CLOCK
JRST @RT'N'INI
;---- EXIT ROUTINE (JRST RTCXIT(F))
RT'N'XIT:CONO RT'N,DK.OCO+DK.OCD+RT'N'CHN## ;CLEAR IRP.
MOVE F,RT'N'SVF ; RESTORE F & T1
MOVE T1,RT'N'SVT
JEN @RT'N'CHL## ; & DISMISS
;---- INTERRUPT ROUTINE
RT'N'INT::CONSO RT'N,DK.IO+DK.ID ; INTERRUPT FOR THIS DK10 (OVERFLOW OR DONE?)
JRST .-1 ; NO
MOVEM F,RT'N'SVF ; YES - SAVE F & T1
MOVEM T1,RT'N'SVT
JSP F,RTCINT## ; LOAD F WITH DDB ADDR & GO TO IRP. ROUTINE
; DEFINE SOME DISPLACMENTS RELATIVE TO DDB
XP RTCINI,RT'N'INI-.
XP RTCXIT,RT'N'XIT-.
RT'N'DDB::
XP RTCNAM,.-RT'N'DDB ;(0) PHYSICAL NAME
SIXBIT/RTC'N/
XP RTCPRD,.-RT'N'DDB ;(1) PERIOD (10 USEC UNITS)
RT'N'PRD: ^D100000
XP RTCTIM,.-RT'N'DDB ;(2) TIME (10 USEC UNITS) UPDATED EVERY IRP.
RT'N'TIM:: 0
XP RTCSON,.-RT'N'DDB ;(3) SKIP IF DK10 ON
CONSO RT'N,DK.ION
XP RTCSNO,.-RT'N'DDB ;(4) SKIP IF NOT OVERFLOW
CONSZ RT'N,DK.IO
XP RTCDAI,.-RT'N'DDB ;(5) READ CLOCK INTO T1
DATAI RT'N,T1
XP RTCLGT,.-RT'N'DDB ;(6) LAST VALUE RETURNED BY GETIME
0
> ;DEFINE RTCDDB
;GENERATE DK10 DDB'S
DEFINE RTCDEF(N)<
IFG M.RT'N,<RTCDDB(N,70)
>>
ZZ==0
REPEAT M.CPU,<
RTCDEF \ZZ
ZZ==ZZ+1
>
XP RTCTIM,0 ;FOR SETIME (SYSINI) SO WON'T GET
XP RTCINI,0 ;UNDEFINED GLOBALS.
SUBTTL DEFINITIONS FOR DISPLAY AND LIGHT PEN
;DISPLAY AND LITE PEN
IFG DISN, <
IFN T30N!TVP10N, <DIS==134>
EXTERN DISSER
XP DISJSR,DISBLK##+1 ;DIS JSR LOCATION IN LOWER CORE
XP ONDIS,DISBTH##+100
XP NONDIS,DISBTH##
XP OFFDIS,0
XP DISPON,2000+DISBIT## ;CONO PI, TURNS DIS PI CHANNEL ON
XP DISPOF,1000+DISBIT## ;CONO PI, TURNS DIS PI CHANNEL OFF
DISCON:
IFN T340N, <EXP ONDIS
DISBSY==77
XP PENON,7400
SETCON::CONO DIS,100 ;PARAMETER MODE
JRST DISIN1##
PENINT::CONSO DIS,0 ;CHECK FOR CONI FLAGS
JRST PENINT ;THIS WILL BE PART OF THE LINKED INTERRUPT CHAIN.
CONSZ DIS,400 ;STOP FLAG UP
JRST STPFLG ;YES
CONSZ DIS,2000 ;PEN FLAG UP
DATAI DIS,PENLOC## ;YES-STORE CURRENT LITE PEN LOCATION
CONO DIS,NONDIS ;CLEAR FLAGS
XJEN PENCHL##
;"STPFLG" SERVICES STOP FLAGS (DISPLAY PROGRAMMED) BY DOING A CLOSE ON THE DISPLAY
STPFLG: JSR PENSAV
JRST DISDSP##+DCL ;DO A CLOSE
ENDCHK::TRNN T1,-1
JRST EXIT1##
JRST EXIT0##
> ;END OF IFN T340N
IFE T340N, <Z
DISBSY==20000
PENON==10000
SETCON::MOVEI T1,PENCHN## ;SET UP CONO WORD
ASH T1,3 ;WITH PROPER CHANNEL ASSIGNMENTS
ADDI T1,DISCHN##
IFN T30N!TVP10N, <TRO T1,4300> ;SET DISPLAY READY BIT & BRIGHTNESS = 3.
MOVEM T1,DISCON
JRST DISIN1##
PENINT::CONSO DIS,0 ;CHECK FOR CONI FLAGS
JRST PENINT ;THIS INSTRUCTION CHANGED TO LINK IN INTERRUPT CHAIN.
DATAI DIS,PENLOC## ;CLEAR PEN INTERRUPT
MOVEM T1,PENLOC## ;SAVE AC T1
MOVE T1,DISBKO## ;GET ABSOLUTE ADDRESS OF NEXT DATA ELEMENT
SUB T1,DISREL## ;MAKE RELATIVE
HRRZS T1 ;CLEAR OUT GARBAGE IN LH
EXCH T1,PENLOC## ;SAVE ADDRESS IN PENLOC
XJEN PENCHL##
ENDCHK::JUMPE T1,EXIT1## ;END OF LIST?
TRNE T1,-1 ;NO, CHANGE INTENSITY COMMAND?
JRST EXIT0## ;NO
MOVSS T1 ;YES, LH HAS USER CONO BITS
DPB T1,INPNT ;DEPOSIT FOR CONO
CONO DIS,@DISCON ;SET NEW INTENSITY
JRST DISNX1##
INPNT: IFN TVP10N, <POINT 2,DISCON,28>
IFN T30N, <POINT 3,DISCON,29>
> ;END OF IFE T340N
DISCNA::CONO DIS,@DISCON
DISCZA::CONSZ DIS,@DISCON
BLKLIT::BLKO DIS,DISBKO##
DISCNO::CONO DIS,OFFDIS
DISCNI::CONI DIS,DISSTS##
DISTST::CONO DIS,DISCHN##
> ;END OF IFG DISN
IFN VBCN,<
EXTERN VBCSER
>
SUBTTL LINE PRINTER DDB DEFINITIONS
IFE FTKS10,<IFG LPTN,<
;LINE PRINTER DDB DEFINITIONS
LPTDON==100
DEFINE LPTDDB (N,P,CPU,CPUN) <
XLIST ;TURN OFF LISTING DURING EXPANSION
LPT2==234 ;DEVICE CODE FOR SECOND PRINTER
LPT3==230 ;DEVICE CODE FOR THIRD PRINTER
IFNDEF LP'CPU'0,<LP'CPU'0==LPT> ;DEFINE STANDARD MNEMONIC DEFINITIONS
IFNDEF LP'CPU'1,<LP'CPU'1==LPT2>; BUT ALLOW FOR OVERRIDE
IFNDEF LP'CPU'2,<LP'CPU'2==LPT3>
LP'N==LP'CPU'P
LP'N'SV1==LP'N'SAC##+F ;DEFINE F SAVE LOCATION
LPTCON==:.-LP'N'DDB
LP'N'INT::CONSO LP'N,0 ;(-4) SKIP IF INTERRUPT FOR THIS LPT
JRST .-1 ;(-3) GO TO NEXT SKIP CHAIN ELEMENT
MOVEM F,LP'N'SV1 ;(-2) SAVE F IN CHANNEL SAVE AREA
JSP F,LPTINT## ;(-1) SET UP DDB ADDRESS AND BRANCH
LP'N'DDB::
LP'N'NAM:
LPNAM=SIXBIT /LPT/
IFE LPTN+DLPTN-1, <LPNAM> ;( 0) PHYSICAL DEVICE NAME
IFN LPTN+DLPTN-1, <LPNAM+<20+$LPNUM>B23> ;( 0) PHYSICAL DEVICE NAME
<XWD <6*HUNGST>,LPTSIZ>+<M'CPU'LP'N'L>B0 ;( 1) DEVICE CHARACTERISTICS
; HUNG TIME IS 63 SECS (CODE 6)
0 ;( 2) DEVICE I/O STATUS
XWD 0,LPTDSP## ;( 3) LH=DDB LINK, RH=DSP TABLE ADDR.
LPTMOD==1_A+1_AL+1_I ;LPT LEGAL MODES
XWD DVOUT+DVLPT,LPTMOD ;( 4) DEVICE CHARACTERISTICS
0 ;( 5) LOGICAL DEVICE NAME
0 ;( 6) BUFFER HEADER ADDRESSES
LPTPTR==:.-LP'N'DDB
LP'N'PTR: 0 ;( 7) BLOCK OUTPUT POINTER
0 ;(10) CURRENT OUTPUT BUFFER ADDRESS
LP'N'STS: 0 ;(11) DEVICE STATUS WORD
XWD .TYLPT!.SPLPT!DEPLEN,0 ;SPOOLED LPT, VAR BUFS, DON'T DEADVANCE
0 ;DEVXTR
0 ;DEVEVM
0 ;DEVPSI
0 ;DEVESE
0 ;DEVHCW
BYTE (3)CPUN(33)0 ;DEVCPU
0 ;DEVISN
<N>B17 ;PUNIT+DEVJOB
LPTCH==:.-LP'N'DDB
EXP LP'N'BTH## ; INTERRUPT CHANNEL ASSIGNMENTS
LPTSVE==:.-LP'N'DDB
MOVE F,LP'N'SV1 ; RESTORE F, SAVE AC'S
JSR LP'N'SAV## ; AND ESTABLISH P
MOVEI F,LP'N'NAM ; SET UP DDB ADDRESS AND RETURN
JRST LPTNXT## ; TO COMMON INTERRUPT HANDLER
LPTEX1==:.-LP'N'DDB
MOVE F,LP'N'SV1 ; RESTORE F AND
XJEN LP'N'CHL##
LPTSV2==:.-LP'N'DDB
0 ; SAVE LOCATION FOR U
LPTDAP==:.-LP'N'DDB
0 ;PLACE TO BUILD AOBJN POINTER
;TO ERROR BLOCK
LPTDAE==:.-LP'N'DDB
BLOCK 7 ;SYSERR BLOCK
; THE REST OF THE DDB CONTAINS
LPTDNO==:.-LP'N'DDB
CONSZ LP'N,CI%SKE## ; THE ACTUAL I/O INSTRUCTIONS
LPTDNZ==:.-LP'N'DDB
CONSO LP'N,CI%SKE##
LPTCSO==:.-LP'N'DDB
CONSO LP'N,(U) ; USED BY THE COMMON SERVICE
LPTCSZ==:.-LP'N'DDB
CONSZ LP'N,(U) ; ROUTINE TO CONTROL A LINE
LPTCNI==:.-LP'N'DDB
CONI LP'N,U ; PRINTER. THEY ARE EXECUTED
LPTCNO==:.-LP'N'DDB
CONO LP'N,(U) ; BY MEANS OF AN XCT INSTRUCTION
LPTDTO==:.-LP'N'DDB
DATAO LP'N,(U) ; INDEXED TO THE PROPER DDB
LPTBKO==:.-LP'N'DDB
BLKO LP'N,LP'N'PTR ;
LPTPAG==:.-LP'N'DDB
0 ;PAGE COUNTER WORD
LPXSTS==:.-LP'N'DDB
CONI LP'N,LP'N'STS ; DEVICE STATUS WORD CONI
LIST ;TURN LISTING BACK ON AFTER EXPANSION
>;END OF DEFINE LPTDDB
GENDDS LPT,LP
>;END "IFG LPTN"
IFG DLPTN,<;GENERATE DLP DDB'S IF NECESSARY
;RSX-20F LINEPRINTER DDB DEFINITIONS
DEFINE DLPDDB (CPUN,N,U,D) <
XLIST ;TURN OFF LISTING DURING EXPANSION
;HARDWARE CHARACTERISTICS DEFAULTS
IFNDEF M'CPUN'FL'U'L,<M'CPUN'FL'U'L==:0> ;PRINTER IS UPPER-CASE
IFNDEF M'CPUN'FL'U'P,<M'CPUN'FL'U'P==:0> ;NO PAGE COUNTER
IFNDEF M'CPUN'FL'U'V,<M'CPUN'FL'U'V==:1> ;DAVFU
IFNDEF M'CPUN'FL'U'C,<M'CPUN'FL'U'C==:0> ;64-CHAR SET
IFNDEF M'CPUN'FL'U'N,<M'CPUN'FL'U'N==:0> ;NO CHAR SET NAME
IFNDEF M'CPUN'FL'U'T,<M'CPUN'FL'U'T==:3> ;RSX-20F LPT
FL'N'DDB::
FL'N'NAM:
LPNAM=SIXBIT/LPT/
IFE LPTN+DLPTN-1,<LPNAM> ;(0) PHYSICAL DEVICE NAME
IFN LPTN+DLPTN-1,<LPNAM+<20+$DLPNM>B23> ;(0) PHYSICAL DEVICE NAME
<XWD <5*HUNGST>,LPTSIZ>+<M'CPUN'FL'U'L>B0 ;(1) DEVICE CHARACTERISTICS
;HUNG TIME IS 31 SECONDS
0 ;(2) DEVICE I/O STATUS
XWD 0,RLPDSP## ;(3) DDB LINK,,DSP TABLE ADDRESS
DLPMOD==1_A+1_AL+1_BYTMOD+1_I ;LEGAL MODES
XWD DVOUT+DVLPT,DLPMOD ;(4) DEVICE CHARACTERISTICS
0 ;(5) LOGICAL DEVICE NAME
0 ;(6) BUFFER HEADER ADDRESSES
0 ;(7) OUTPUT POINTER
0 ;(10) CURRENT OUTPUT BUFFER ADDRESS
0 ;(11) DEVICE STATUS WORD
XWD .TYLPT!.SPLPT!DEPLEN,0 ;SPOOLED LPT, VAR BUFS, DON'T DEADVANCE
0 ;DEVXTR
0 ;DEVEVM
0 ;DEVPSI
0 ;DEVESE
BYTE (1) M'CPUN'FL'U'L, M'CPUN'FL'U'P, 0 (3) M'CPUN'FL'U'V, M'CPUN'FL'U'C (3) M'CPUN'FL'U'T (6) 0 (18) M'CPUN'FL'U'N
;DEVHCW
BYTE (3)CPUN(33)0 ;DEVCPU
0 ;DEVISN
<N>B17 ;PUNIT+DEVJOB
0 ;COUNT OF OUTPUT CHARS
DLPDUX==:.-FL'N'DDB
XWD U,D ;UNIT # ON FRONT-END,,DLP DTE INDEX
DLPMLA==:.-FL'N'DDB
0 ;MAXIMUM LINE ALLOCATION
DLPRLA==:.-FL'N'DDB
0 ;REMAINING LINE ALLOCATION
DLPSNT==:.-FL'N'DDB
0 ;NUMBER OF WORDS ALREADY SENT
LIST ;TURN LISTING BACK ON AFTER EXPANSION
>;END DEFINE OF DLPDDB
; ... STILL IN IFG DLPTN CONDITIONAL
DEFINE RSXDTE (C,D) <
IFNDEF M'C'LP'D'N,<M'C'LP'D'N==:0>
IFG M'C'LP'D'N,< ;;DO ONLY IF AT LEAST ONE LPT ON DTE
EXTERN DLPSER
$LPUNT==0 ;;UNIT STARTS AT ZERO FOR EACH DTE
REPEAT M'C'LP'D'N,< ;;DO FOR EACH LPT ON DTE
DLPDDB \C,\<$DLPNM-$LPNUM>,\$LPUNT,$DTNDX
;;GENERATE DDB
$LPUNT==$LPUNT+1 ;;STEP TO NEXT UNIT ON DTE
$DLPNM==$DLPNM+1 ;;STEP TO NEXT UNIT FOR SYSTEM
>
$DTNDX==$DTNDX+1 ;;STEP TO NEXT DTE
>
>
IFNDEF $LPNUM,<$LPNUM==0>
$DLPNM==$LPNUM ;START DLP UNITS AFTER REGULAR LPTS
$DTNDX==0 ;DTE INDEX FOR MACRO STARTS AT 0
RSX20F ;GENERATE DDB'S FOR RSX-20F LPT'S
>;END IFG DLPTN
;DEFINE DLPDSP IF DLPSER IS NOT LOADED
IFN FTKL10,<
IFE M.DLP,<
DLPDSP==:EATDSP## ;IGNORE DLP MESSAGES
>;END IFE M.DLP
>;END FTKL10
>;END IFE FTKS10
IFN FTKS10,<
IFG LPTN, <
MAXLBZ==:^D253 ;MAX WORD SIZE OF USER'S LPT BUFFERS
;(LPTSPL USES THIS NUMBER)
LPTMOD==1_A+1_AL+1_I ;LPT LEGAL MODES
;DEFINITION FOR LINE PRINTER DEVICE DATA BLOCKS
DEFINE LPTDDB (N) <
XLIST ;TURN OFF LISTING DURING EXPANSION
LP'N'INT::0 ;INTERRUPT JSR'S TO HERE
EXP 0,IC.UOU,.+1 ;XPCW BLOCK
EXCH T1,LP'N'INT ;GET INTERRUPT PC
MOVEM T1,LP'N'CHL## ;PUT INTO -10 STYLE INTERRUPT HANDLER
MOVE T1,LP'N'INT+1 ;NEXT
MOVEM T1,LP'N'CHL##+1
MOVE T1,LP'N'INT ;AND RESTORE T1
JSR LP'N'SAV## ;SAVE AC'S
JSP F,LPTINT## ;SET UP F AND GO TO INTERRUPT CODE
LP'N'DDB::PHASE 0
LPNAM=SIXBIT /LPT/
IFE LPTN-1, <LPNAM> ;(0) DEVNAM
IFN LPTN-1, <LPNAM+<20+$LPNUM>B23>
<XWD <6*HUNGST>,LPTSIZ>+<M.LP'N'L>B0 ;(1) DEVCHR
0 ;(2) DEVIOS
XWD 0,LPTDSP## ;(3) DEVSER
XWD DVOUT+DVLPT,LPTMOD ;(4) DEVMOD
0 ;(5) DEVLOG
0 ;(6) DEVBUF
LPTPTR::!0 ;(7) DEVIAD
XWD R,0 ;(10) DEVOAD
0 ;(11) DEVSTS
XWD .TYLPT!.SPLPT!DEPLEN,0 ;(12) DEVSTA
0 ;(13) DEVXTR
0 ;(14) DEVEVM
0 ;(15) DEVPSI
0 ;(16) DEVESE
0 ;(17) DEVHCW
BYTE (3)0(33)0 ;(20) DEVCPU
0 ;(21) DEVISN
<N>B17 ;(22) PUNIT+DEVJOB
LPTDAP::!0 ;PLACE TO BUILD AOBJN POINTER TO LPTDAE
LPTDAE::!BLOCK 13 ;SYSERR BLOCK
LPTSTS::!0 ;MORE DEVICE STATUS
LPTRSV::!0 ;SAVE AREA DURING UP-ARROW TRANSLATION
LPTWSV::!0 ;...
LPTUDC::!0 ;UNDEFINED CHAR INTERRUPT DATA SAVED
LPTPAG::!0 ;PAGE COUNTER WORD
LPTVEC::!LP11IV ;-11 STYLE INTERRUPT VECTOR ADDRESS
LPTBAS::!LP11CA ;LP20 BASE DEVICE ADDRESS
LPTIVI::!XPCW LP'N'INT ;INTERRUPT INSTRUCTION FOR THIS LPT
LPTFNC::!0 ;CURRENT FUNCTION BITS SAVED HERE
LPTBYT::!0 ;OUTPUT BYTE COUNT STORED HERE
LPTCDB::! CHNMAC(\M.LP'N'C) ;POINTER TO CHANNEL DATA BLOCK
LPTBUF::!BLOCK <<MAXLBZ*5>/4>+1 ;ENOUGH ROOM FOR LPTSPL 7 TO 8 BIT BYTE CONVERSION
LPTBFZ==:.-LPTBUF ;SIZE OF THE LPT BUFFER
DEPHASE ;BACK TO NORMAL
LIST ;TURN LISTING BACK ON AFTER EXPANSION
>;END DEFINE LPTDDB
EXTERNAL LP2SER ;HAUL IN THE SERVICE ROUTINE
$LPNUM==0 ;LPT NUMBER SYMBOL
IFG LPTN-1,<PRINTX KS10 MONITOR DOES NOT SUPPORT MORE THAN ONE LPT>
REPEAT LPTN, <
LPTDDB \$LPNUM
$LPNUM==$LPNUM+1
>
>;END IFG TAPN
>;END IFN FTKS10
SUBTTL PLOTTER DDB DEFINITIONS
IFG PLTN, <
;CALCOMP PLOTTER DDB DEFINITIONS
DEFINE PLTDDB (N,P,CPU,CPUN) <
XLIST ;TURN OFF LISTING DURING EXPANSION
PLT2==144 ;DEVICE SELECTION CODE FOR SECOND PLOTTER
IFNDEF PL'CPU'0,<PL'CPU'0==PLT> ;DEFINE STANDARD MNEMONIC DEFINITIONS
IFNDEF PL'CPU'1,<PL'CPU'1==PLT2>; BUT ALLOW FOR OVERRIDE
PL'N==PL'CPU'P
PL'N'SV1==PL'N'SAC##+F ;DEFINE F SAVE LOCATION
PLTCON==:.-PL'N'DDB
PL'N'INT::CONSO PL'N,0 ; SKIP IF INTERRUPT FOR THIS PLT
JRST .-1 ; GO TO NEXT SKIP CHAIN ELEMENT
CONI PL'N,PL'N'STS
SOSGE PL'N'CTR ;OUTPUT CHARACTERS LEFT?
JRST PL'N'IN2 ;NO
MOVEM T1,PL'N'SV1 ;SAVE T1 IN CHANNEL SAVE AREA
ILDB T1,PL'N'PTR ;GET NEXT CHARACTER
PLTDTO==:.-PL'N'DDB
DATAO PL'N,T1 ;SEND TO PLOTTER
MOVE T1,PL'N'SV1 ;RESTORE T1 AND
XJEN PL'N'CHL##
PL'N'IN2:JSR PL'N'SAV## ;SAVE AC'S
JSP F,PLTNXT## ;SET UP F, GO TO PLOTTER SERVICE
PL'N'DDB::
PL'N'NAM: PLNAM==SIXBIT /PLT/
IFE PLTN-1,<PLNAM> ; ( 0) PHYSICAL DEVICE NAME
IFN PLTN-1,<PLNAM+<20+$PLNUM>B23>; ( 0) PHYSICAL DEVICE NAME
XWD HUNGST*4,^D36 ;( 1) XWD (HUNG TIMEOUT),(BUFFER SIZE)
; CODE 4 - HUNG TIME=15 SECONDS
0 ;( 2) DEVICE IO STATUS
XWD 0,PLTDSP## ;( 3) LH=DDB LINK; RH=DSP TABLE ADDR.
PLTMOD==1_A+1_AL+1_I+1_IB+1_B ;PLOTTER LEGAL MODES
XWD DVOUT,PLTMOD ;( 4) XWD (OUTPUT DEV), (MODES)
0 ;( 5) LOGICAL DEVICE NAME
0 ;( 6) BUFFER HEADER ADDRESSES
PLTPTR==:.-PL'N'DDB
PL'N'PTR: 0 ;( 7) OUTPUT BYTE POINTER
0 ;(10) CURRENT OUTPUT BUFFER ADDRESS
PL'N'STS: 0 ;(11) DEVICE STATUS WORD
XWD .TYPLT!.SPPLT,0 ;(12) SPOOLED PLT
0 ;(13) DEVXTR
0 ;(14) DEVEVM
0 ;(15) DEVPSI
0 ;(16) DEVESE
0 ;(17) DEVHCW
BYTE (3)CPUN(33)0 ;(20) DEVCPU
0 ;(21) DEVISN
<N>B17 ;(22) PUNIT+DEVJOB
PL'N'CTR: 0 ;OUTPUT BYTE COUNTER
PLTCH==:.-PL'N'DDB
PL'N'CHN## ; INTERRUPT CHANNEL
PLTCNO==:.-PL'N'DDB
CONO PL'N,(T1) ;XCT'D FROM PLTSER
LIST ;TURN ON LISTING AFTER EXPANSION
> ;END OF PLTDDB MACRO DEFINITION
GENDDS PLT,PL
> ;END OF "IFG PLTN"
SUBTTL DEFINITIONS FOR PAPER TAPE AND PTY'S
IFG PTRN, <
SUBTTL PAPER TAPE READER DDB DEFINITIONS
IFE FTKS10,<
DEFINE PTRDDB (N,P,CPU,CPUN) <
IFNDEF PR'CPU'0,<PR'CPU'0==PTR>
PR'N==PR'CPU'P
PR'N'SV1==PR'N'SAC##+F ;DEFINE F SAVE LOCATION
PTRCON==:.-PR'N'DDB
PR'N'INT::CONSO PR'N,0 ;(-4) SKIP IF INTERRUPT FOR THIS READER
JRST .-1 ;(-3) NOT HERE, CONTINUE DOWN THE CHAIN
MOVEM F,PR'N'SV1 ;(-2) SAVE F IN CHANNEL SAVE AREA
JSP F,PTRINT## ;(-1) SET F TO DDB ADDRESS AND SERVICE INTERRUPT
PR'N'DDB::
PR'N'NAM: PTRNAM=SIXBIT/PTR/
IFE PTRN-1,<PTRNAM> ;(0) PHYSICAL DEVICE NAME
IFN PTRN-1,<PTRNAM+<20+$PRNUM>B23> ;(0) PHYSICAL DEVICE NAME
XWD 5*HUNGST,41 ;(1) CODE 5 - HUNG TIME IS 31 SECONDS
PTRIOS==:.-PR'N'DDB
0 ;(2) DEVIOS
PTRDSP## ;(3) LH=DDB LINK, RH=PTR DISPATCH TABLE
XWD DVPTR+DVIN,14403;(4) DEVICE CHARACTERISTICS
0 ;(5) LOGICAL DEVICE NAME (DEVLOG)
0 ;(6) BUFFER HEADER ADDRESSES
PTRIAD==:.-PR'N'DDB
0 ;(7) ADDRESS OF CURRENT INPUT BUFFER
PTRPTR==:.-PR'N'DDB
0 ;(10) BYTE POINTER TO CURRENT INPUT BUFFER
PTRSTS==.-PR'N'DDB
PR'N'STS: 0 ;(11) LATEST CONI STATUS BITS
XWD .TYPTR!DEPLEN,0 ;NON-SPOOLED, VARIABLE BUFFER SIZE
0 ;DEVXTR
0 ;DEVEVM
0 ;DEVPSI
0 ;DEVESE
0 ;DEVHCW
BYTE (3)CPUN(33)0 ;DEVCPU
0 ;DEVISN
<N>B17 ;PUNIT+DEVJOB
PTRCTR==:.-PR'N'DDB
0 ;BYTE COUNTER FOR IDPB'S INTO USER'S BUFFERS
PTRSV1==:.-PR'N'DDB
0 ;TEMPORARY LOACATION FOR SAVING AN AC
PTRCH==:.-PR'N'DDB
EXP PR'N'CHN## ;PTR PIA
PTRPWR==:.-PR'N'DDB
CONSO PR'N,POW## ;PTR ON/OFF?
PTRCNO==:.-PR'N'DDB
CONO PR'N,(U)
PTRDTI==:.-PR'N'DDB
DATAI PR'N,U
PTRDS1==:.-PR'N'DDB
DATAI PR'N,PTRSV1(F)
PTRSVE==:.-PR'N'DDB
PR'N'SVE: 0 ;ROUTINE TO SAVE AC'S
MOVE F,PR'N'SV1 ;RESTORE F
JSR PR'N'SAV## ;SAVE AC'S AND ESTABLISH P
MOVEI F,PR'N'DDB ;SET UP DDB ADDRESS
JRST @PR'N'SVE ;AND RETURN
PTREX1==:.-PR'N'DDB
MOVE F,PR'N'SV1 ;RESTORE F
XJEN PR'N'CHL##
PTRXSTS==:.-PR'N'DDB
CONI PR'N,PR'N'STS
>;DEFINE
>;IFE FTKS10
IFN FTKS10,<
DEFINE PTRDDB (N,P,CPU,CPUN) <
IFNDEF PR'CPU'0C,<PR'CPU'0C==PR11CA>
IFNDEF PR'CPU'0I,<PR'CPU'0I==PR11IV>
PR'N'INT::EXP 0,0,IC.UOU,.+1 ;XPCW here from IVT
EXCH T1,PR'N'INT ;Find return PC
MOVEM T1,PR'N'CHL## ;Store in return locn
MOVE T1,PR'N'INT+1 ;Second word with KLP
MOVEM T1,PR'N'CHL##+1 ;...
MOVE T1,PR'N'INT ;Restore T1
JSR PR'N'SAV## ;Get our AC block
JSP F,PTRINT## ;(-1) SET F TO DDB ADDRESS AND SERVICE INTERRUPT
PR'N'DDB::
PR'N'NAM: PTRNAM=SIXBIT/PTR/
IFE PTRN-1,<PTRNAM> ;(0) PHYSICAL DEVICE NAME
IFN PTRN-1,<PTRNAM+<20+$PRNUM>B23> ;(0) PHYSICAL DEVICE NAME
XWD 5*HUNGST,41 ;(1) CODE 5 - HUNG TIME IS 31 SECONDS
0 ;(2) DEVIOS
PTRDSP## ;(3) LH=DDB LINK, RH=PTR DISPATCH TABLE
XWD DVPTR+DVIN,14403;(4) DEVICE CHARACTERISTICS
0 ;(5) LOGICAL DEVICE NAME (DEVLOG)
0 ;(6) BUFFER HEADER ADDRESSES
0 ;(7) ADDRESS OF CURRENT INPUT BUFFER
0 ;(10) BYTE POINTER TO CURRENT INPUT BUFFER
0 ;(11) LATEST CONI STATUS BITS
XWD .TYPTR!DEPLEN,0 ;NON-SPOOLED, VARIABLE BUFFER SIZE
0 ;DEVXTR
0 ;DEVEVM
0 ;DEVPSI
0 ;DEVESE
0 ;DEVHCW
BYTE (3)CPUN(33)0 ;DEVCPU
0 ;DEVISN
0 ;DEVJOB
0 ;BYTE COUNTER FOR IDPB'S INTO USER'S BUFFERS
PTRBLK==:.-PR'N'DDB
BLOCK 2 ;Temps for PC20 hardware simulation
PTRDTI==:.-PR'N'DDB
EXP PR'CPU'0C,PR'CPU'0C+2,PR'CPU'0I
XPCW PR'N'INT
>;End DEFINE PTRDDB
>;End FTKS10
GENDDS PTR,PR
>;END IFG PTR
IFG PTPN, <
SUBTTL PAPER TAPE PUNCH DDB DEFINITIONS
IFE FTKS10,<
DEFINE PTPDDB (N,P,CPU,CPUN) <
IFNDEF PP'CPU'0,<PP'CPU'0==PTP>
PP'N==PP'CPU'P
PP'N'SV1==PP'N'SAC##+F ;DEFINE F SAVE LOCATION
PTPCON==:.-PP'N'DDB
PP'N'INT::CONSO PP'N,0 ;(-4) SKIP IF INTERRUPT FOR THIS READER
JRST .-1 ;(-3) NOT HERE, CONTINUE DOWN THE CHAIN
MOVEM F,PP'N'SV1 ;(-2) SAVE F IN CHANNEL SAVE AREA
JSP F,PTPINT## ;(-1) SET F TO DDB ADDRESS AND SERVICE INTERRUPT
PP'N'DDB::
PP'N'NAM: PTPNAM=SIXBIT/PTP/
IFE PTPN-1,<PTPNAM> ;(0) PHYSICAL DEVICE NAME
IFN PTPN-1,<PTPNAM+<20+$PPNUM>B23> ;(0) PHYSICAL DEVICE NAME
XWD 4*HUNGST,41 ;(1) CODE 4 - HUNG TIME IS 15 SECONDS
PTPIOS==:.-PP'N'DDB
0 ;(2) DEVIOS
PTPDSP## ;(3) LH=DDB LINK, RH=PTP DISPATCH TABLE
XWD DVPTP+DVOUT,14403 ;(4) DEVICE CHARACTERISTICS
0 ;(5) LOGICAL DEVICE NAME (DEVLOG)
0 ;(6) BUFFER HEADER ADDRESSES
PTPPTR==:.-PP'N'DDB
0 ;(7) BYTE POINTER TO CURRENT OUTPUT BUFFER
PTPOAD==:.-PP'N'DDB
0 ;(10) ADDRESS OF CURRENT OUTPUT BUFFER
PTPSTS==.-PP'N'DDB
PP'N'STS: 0 ;(11) LATEST CONI STATUS BITS
XWD .TYPTP!.SPPTP!DEPLEN,0 ;VAR BUFFERS, SPOOLED
0 ;DEVXTR
0 ;DEVEVM
0 ;DEVPSI
0 ;DEVESE
0 ;DEVHCW
BYTE (3)CPUN(33)0 ;DEVCPU
0 ;DEVISN
<N>B17 ;PUNIT+DEVJOB
PTPCTR==:.-PP'N'DDB
0 ;BYTE COUNTER FOR ILDB'S FROM USER'S BUFFERS
PTPCNT==:.-PP'N'DDB
0
PTPCHA==:.-PP'N'DDB
0 ;TEMPORARY LOCATION TO STORE CHAR
PTPSIO==:.-PP'N'DDB
0 ;SAVE DEVIOS
PTPCH==:.-PP'N'DDB
EXP PP'N'CHN## ;PTP PIA
PTPCNO==:.-PP'N'DDB
CONO PP'N,(U)
PTPCN0==:.-PP'N'DDB
CONO PP'N,0 ;TURN PTR OFF
PTPSDN==:.-PP'N'DDB
CONO PP'N,PTPDON##(T1);SET DONE
PTPOOT==:.-PP'N'DDB
CONSO PP'N,PTPNTP## ;OUT OF TAPE?
PTPDTO==:.-PP'N'DDB
DATAO PP'N,T1
PTPDOC==:.-PP'N'DDB
DATAO PP'N,PTPCHA(F)
PTPSVE==:.-PP'N'DDB
PP'N'SVE: 0 ;ROUTINE TO SAVE AC'S
MOVE F,PP'N'SV1 ;RESTORE F
JSR PP'N'SAV## ;SAVE AC'S AND ESTABLISH P
MOVEI F,PP'N'DDB ;SET UP DDB ADDRESS
JRST @PP'N'SVE ;AND RETURN
PTPEX1==:.-PP'N'DDB
MOVE F,PP'N'SV1 ;RESTORE F
XJEN PP'N'CHL##
PTPXSTS==:.-PP'N'DDB
CONI PP'N,PP'N'STS
>;DEFINE
>;FTKS10
IFN FTKS10,<
DEFINE PTPDDB (N,P,CPU,CPUN) <
IFNDEF PP'CPU'0C,<PP'CPU'0C==PP11CA>
IFNDEF PP'CPU'0I,<PP'CPU'0I==PP11IV>
PP'N'INT::EXP 0,0,IC.UOU,.+1
EXCH T1,PP'N'INT ;Get return PC
MOVEM T1,PP'N'CHL## ;Save for return
MOVE T1,PP'N'INT+1
MOVEM T1,PP'N'CHL##+1
MOVE T1,PP'N'INT ;Restore T1
JSR PP'N'SAV## ;Get our AC block
JSP F,PTPINT## ;(-1) SET F TO DDB ADDRESS AND SERVICE INTERRUPT
PP'N'DDB::
PP'N'NAM: PTPNAM=SIXBIT/PTP/
IFE PTPN-1,<PTPNAM> ;(0) PHYSICAL DEVICE NAME
IFN PTPN-1,<PTPNAM+<20+$PPNUM>B23> ;(0) PHYSICAL DEVICE NAME
XWD 4*HUNGST,41 ;(1) CODE 4 - HUNG TIME IS 15 SECONDS
0 ;(2) DEVIOS
PTPDSP## ;(3) LH=DDB LINK, RH=PTP DISPATCH TABLE
XWD DVPTP+DVOUT,14403 ;(4) DEVICE CHARACTERISTICS
0 ;(5) LOGICAL DEVICE NAME (DEVLOG)
0 ;(6) BUFFER HEADER ADDRESSES
0 ;(7) BYTE POINTER TO CURRENT OUTPUT BUFFER
0 ;(10) ADDRESS OF CURRENT OUTPUT BUFFER
0 ;(11) LATEST CONI STATUS BITS
XWD .TYPTP!.SPPTP!DEPLEN,0 ;VAR BUFFERS, SPOOLED
0 ;DEVXTR
0 ;DEVEVM
0 ;DEVPSI
0 ;DEVESE
0 ;DEVHCW
BYTE (3)CPUN(33)0 ;DEVCPU
0 ;DEVISN
0 ;DEVJOB
0 ;BYTE COUNTER FOR ILDB'S FROM USER'S BUFFERS
PTPCNT==:.-PP'N'DDB
0
PTPCHA==:.-PP'N'DDB
0 ;TEMPORARY LOCATION TO STORE CHAR
PTPCNO==:.-PP'N'DDB
EXP PP'CPU'0C,PP'CPU'0C+2,PP'CPU'0I
XPCW PP'N'INT
>;End DEFINE PTPDDB
>;FTKS10
GENDDS PTP,PP
>;END IFG PTP
PASCII==:700
PIMAGE==:4400
PIMTTY==:1000
PBYTMD==:1000
;PSEUDO TTY ENTRY POINT
IFE PTYN, <PTYPE::PTMNMZ::PTYOW::PTMNMD::HALT CPOPJ## ;HALT IF SCNSER CALL PTY ROUTINES
PTYDSP==:0 ; BECAUSE NONE LOADED
PTYLST==:0 ;SATISFY GLOBOL IN SYSINI
;IF NO PTY'S, SATISFY GLOBALS
CTLJOB==:CPOPJ##
UJBSTS==:CPOPJ##
PTBTCH==:CPOPJ1##
;IF NO PTY'S, JOB CAN NEVER BE CONTROLLED BY PTY, SO
; SUBSTITUTE THIS DUMMY SUBROUTINE FOR CTLJB
CTLJBU::SETZM U ;NO LDB
CTLJB::
CTLJBD::MOVNI T1,1
POPJ P,
>
IFG PTYN, <
EXTERNAL PTYSER ;LOAD PTY SERVICE ROUTINE
>
IFN FTKL10,<;DO THIS STUFF ONLY FOR KL CPU'S
;DEFINE SYMBOLS AND STORAGE FOR RSX-20F ASYNC TERMINALS
$HIGH ;THIS PART INTO THE HIGH SEGMENT
DEFINE RSXDTE(C,D),<
IFE D,<
EXP $TTOFS
$TTOFS==$TTOFS+M'C'TTDN
>
>
$TTOFS==TTDLAL ;INITIALIZE SYMBOL USED IN FOLLOWING MACRO
TTDOFS::RSX20F ;TABLE OF TTD LINE TABLE OFFSETS
EXP $TTOFS ;FIRST LINE AFTER DTE DRIVEN LINES
TTDLOM==:TTDOFS+1 ;BASE OF RANGE CHECK TABLE
TTDDSO==:<TTDLAL-TTDDAL> ;TRANSLATION FOR DSCTAB ENTRIES
IFG DLPTN,< ;DO THIS ONLY IF RSX-20F LPT'S
;DEFINE STORAGE AND SYMBOLS FOR LINEPRINTERS ON RSX-20F FRONT-ENDS
DEFINE RSXDTE (C,D) <
IFG M'C'LP'D'N,<XWD C,D>
>
LPCPDT::RSX20F ;MAKE TABLE WITH ONE ENTRY FOR EACH
; RSX-20F FRONT-END SUPPORTING LINEPRINTERS
RSXLPN==:.-LPCPDT ;NUMBER OF SUCH FRONT-ENDS
LPDTDV:: ;TABLE TO CONVERT FROM CPU #, DTE #,
;AND UNIT NUMBER TO DDB ADDRESS
DEFINE LPCPDT (C) <
IFDEF M'C'DTEN,<Z @LP'C'DTE(P1)> ;INDEX OFF DTE NUMBER
IFNDEF M'C'DTEN,<Z> ;NO DTE'S ON THIS CPU
>
ZZ==0
REPEAT CPUN,<
LPCPDT \ZZ
ZZ==ZZ+1
>
DEFINE RSXDTE (C,D) <
IFE D,<LP'C'DTE:>
IFN M'C'LP'D'N,<Z @LP'C'D'DV(T1)> ;INDEX OFF LINE NUMBER
IFE M'C'LP'D'N,<Z> ;NO LINE PRINTERS THIS DTE
>
RSX20F ;GENERATE DTE TABLE
DEFINE RSXDTE (C,D) <
IFN M'C'LP'D'N,<
LP'C'D'DV:
REPEAT M'C'LP'D'N,<
DLPDDB \ZZ
ZZ==ZZ+1
>
REPEAT <2-M'C'LP'D'N>,<
Z
>
>
>
DEFINE DLPDDB (X) <FL'X'DDB>
ZZ==0
RSX20F ;GENERATE THE DDB ADDRESS TABLE
>;END IFG DLPTN
; ... STILL IN FTKL10 CONDITIONAL
IFN DCDRN,<
$HIGH
;DEFINE SPECIAL TABLES FOR RSX20F CARD READERS
DEFINE RSXDTE (C,D) <
XWD C,D
>
CRCPDT::RSX20F ;CORRESPONDENCE TABLE BETWEEN
;DTE INDEX AND CPU#,,DTE # FOR
;DTESER
CRDTDV:: ;TABLE TO CONVERT FROM CPU #, DTE #,
;AND UNIT NUMBER TO DDB ADDRESS
DEFINE CRCPDT (C) <
IFDEF M'C'DTEN,<Z @CR'C'DTE(P1)> ;INDEX OFF DTE NUMBER
IFNDEF M'C'DTEN,<Z> ;NO DTE'S ON THIS CPU
>
ZZ==0
REPEAT CPUN,<
CRCPDT \ZZ
ZZ==ZZ+1
>
DEFINE RSXDTE (C,D) <
IFE D,<CR'C'DTE:>
IFN M'C'CR'D'N,<Z @CR'C'D'DV(T1)> ;INDEX OFF LINE NUMBER
IFE M'C'CR'D'N,<Z> ;NO CARD READERS THIS DTE
>
RSX20F ;GENERATE DTE TABLE
DEFINE RSXDTE (C,D) <
IFN M'C'CR'D'N,<
CR'C'D'DV:
REPEAT M'C'CR'D'N,<
DCRDDB \ZZ
ZZ==ZZ+1
>
>
>
DEFINE DCRDDB (X) <FC'X'DDB>
ZZ==0
RSX20F ;GENERATE THE DDB ADDRESS TABLE
>;END IFN DCDRN
>;END IFN FTKL10
SUBTTL ROUTINES COMMON TO PDP11 COMM FRONT-END'S ON DL10'S
IFN PDP11N,<
DLMAP
$HIGH
;SUBROUTINE TO PROCESS THE COMMAND:
; .SET NOMESSAGE PDP11 N
;CALL WITH:
; PUSHJ P,D76SIL
; RETURN HERE OR JRST COMERA
D76SIL::PUSHJ P,DECIN## ;READ A DECIMAL NUMBER
JRST D76SIP ;NO NUMBER ASSUME ZERO
CAIA ;ILLEGAL CHARACTER MAYBE
JRST D76SIP ;OK GOT A DIGIT
CAIE T3,"*" ;WILD CARD
JRST COMERA## ;NO, ERROR
MOVEI T2,7 ;YES, SET SIL ON ALL PDP11'S
PUSHJ P,D76SIA ;CONTINUE
JFCL ;IGNORE IF NOT THERE
SOJGE T2,.-2 ;CONTINUE
POPJ P, ;RETURN
D76SIP: PUSHJ P,D76SIA ;GO SILENCE THIS 76
JRST COMERA## ;LOST, GIVE ERROR
POPJ P, ;RETURN
D76SIA: SKIPL T2 ;.LT. 0 IS WRONG.
CAIL T2,10 ;SKIP IF PORT .LT. 8
POPJ P, ;INVALID PORT #
IFN M.DAS78,<
CAILE T2,M78HPO## ;SEE IF THIS PORT EXISTS ON A DAS78
JRST D76SI1 ;NO, TRY OTHER 11S
SKIPE T1,M78BAT##(T2) ;IF A DAS78 THEN
JRST D76SI0 ; ALL SET
> ;END IFN M.DAS78
D76SI1: SKIPE T1,DLXBAT##(T2) ;IF NO KNOWN PORT OR
SKIPN T1,DLXWIN##(T1) ; NO WINDOW ASSIGNED THEN
POPJ P, ; COMPLAIN
D76SI0: SKIPG DWN(T1) ;IS THE PDP11 DOWN?
SETOM DWN(T1) ;YES--TURN OFF THE MESSAGE
JRST CPOPJ1## ;RETURN
$LOW
> ;END OF IFN PDP11N
IFN <PDP11N-DLX.78>,< ;IF ANY DL10 BASED 11S BUT NOT DAS78S
;ROUTINE TO GET ERROR STATUS AND CALL DAEMON FOR AN ERROR
;ON A DC76, DN85 OR DN60
;ARGUMENTS T1=PORT # OF 11 WITH ERROR
DLB==60 ;DEVICE CODE FOR DL10
DLC==64 ;DEVICE CODE FOR DL10
DLBREG==3 ;NUMBER OF HIGHEST CONI DLB, WE DO
DLBEDT==0 ;VALUE OF R FOR DATAI DLB, WE WANT TO SAVE
$HIGH
DL10EL::MOVEM T1,DLEPRT ;SAVE THE PORT OF THE 11 WITH ERROR
MOVE T2,DLXNMT##(P2) ;GET NAME
MOVEM T2,DLEPGM ;SAVE
HRLZ T2,DLXTYP##(P2)
MOVEM T2,DLESTS
MOVE T2,DLXWIN##(P2)
MOVE T2,HLT(T2)
HRRM T2,DLESTS
CONI DLC,DLCCNI ;GET THE DLC CONI
DATAI DLC,DLCDTI ; AND DATAI
MOVEI T1,DLBREG ;GET NUMBER OF REGS TO SAVE OF DLB
DLBLUP: DPB T1,[POINT 2,DLBDTO,5] ;PUT REG INTO DATAO
DATAO DLB,DLBDTO ;AND DO DATAO SO CONI GETS RIGHT REG
CONI DLB,DLBCNI(T1) ;GET THIS DLB CONI
CAIN T1,DLBEDT ;IS THIS THE DATAI WE WANT?
DATAI DLB,DLBDTI ;YES, GET IT
SOJGE T1,DLBLUP ;AND LOOP BACK FOR NEXT REG
MOVEI T1,.ERDLE ;GET CODE FOR ERROR RPT UUO
HRLI T1,DLEBLK ;AND ADDRESS FOR DAEMON TO LOOK AT
PJRST DAEEIM## ;AND GO WAKE DAEMON
$LOW
DLBDTO: XWD 1,0 ;BITS FOR DATAO DLB,
DLEBLK:-DLELEN,,DLEPRT ;AOBJN POINTER FOR ERROR BLOCK
DLEPRT: BLOCK 1 ;PORT OF 11 WITH ERROR
DLCCNI: BLOCK 1 ;CONI DLC AT ERROR
DLCDTI: BLOCK 1 ;DATAI DLC AT ERROR
DLBCNI: BLOCK 4 ;BLOCK FOR CONI DLB'S
DLBDTI: BLOCK 1 ;DATAI DLB WITH R=0 AT ERROR
DLEPGM: BLOCK 1 ;SIXBIT PROGRAM NAME
DLESTS: BLOCK 1 ;HALT STATUS
DLELEN==.-DLEPRT
> ;END IFN <PDP11N-DLX.78>
IFN <PDP11N!M.KL10!M.DN60!M.KDUP!M.DMRN>,< ;IF DL10S, DTES, DN60S, OR KMC/DUPS(DMRs)
;CAL11. UUO
$HIGH
CALL11::PUSH P,T1 ;SAVE USER'S ARG
HRLOI P2,377777 ;ASSUME PRIV. JOB.
PUSHJ P,PRUSET## ;SKIP IF PRIV.
TLO P2,400000 ;NOT PRIV.
POP P,T1 ;RESTORE USER'S ARG
HRR M,T1 ;GET USER'S AC
HLRE T3,T1 ;GET COUNT
JUMPLE T3,ECOD7## ;.LE. ZERO ARGS NOT ENOUGH!
PUSHJ P,GETWDU## ;GET FUNCTION CODE INTO T1
SOJL T3,ECOD7## ;ERROR CODE 7: NOT ENOUGH ARGS
MOVE P3,T3 ;SAVE LENGTH
MOVE P1,T1 ;COPY FUNCTION WORD TO A SAFER PLACE
SKIPL P1 ;OLD STYLE FUNCTION WORD?
PUSHJ P,C11OLD ;YES--HACK IT UP A BIT
PUSHJ P,C11ARG ;DECODE THE TYPE, CPU, AND PORT NUMBER
POPJ P, ;RETURN ON ERRORS
MOVE T3,P3 ;RESTORE LENGTH
SKIPN T2,DLXCAL##(W) ;GET CAL11. TABLE POINTER
MOVE T2,[XWD CAL11L,CAL11D] ;NONE, USE DEFAULT
HLRZ T4,T2 ;GET LENGTH OF TABLE
CAML T1,T4 ;FUNCTION TOO LARGE?
JRST ECOD2## ;YES, ERROR CODE 2.
ADD T2,T1 ;NO, POINT TO TABLE ENTRY
MOVE T1,0(T2) ;PICK UP ENTRY
AND T1,P2 ;CLEAR SIGN BIT IF PRIV
JUMPL T1,ECOD1## ;IF STILL SET, NEED PRIV.
PUSHJ P,0(T1) ;GO DO FUNCTION
POPJ P, ;PROPAGATE ERROR BACK TO USER
PJRST CPOPJ1## ;SKIP RETURN
;TABLE FOR CAL11. UUO IF THERE IS NO SERVICE ROUTINE
CAL11D: XWD 400000,ECOD2## ;(0) DEPOSIT
XWD 400000,ECOD2## ;(1) EXAMINE
XWD 400000,ECOD2## ;(2) QUEUE A MESSAGE
XWD 0,CAL11N ;(3) RETURN NAME
XWD 0,CAL11S ;(4) UP/DOWN STATUS
XWD 400000,ECOD2## ;(5) SEND
XWD 400000,ECOD2## ;(6) RECEIVE
XWD 0,CAL11T ;(7) TYPE
CAL11L==.-CAL11D ;LENGTH OF TABLE
; CROCK TO FUDGE UP A NEW FORMAT FUNCTION WORD FROM AN OLD STYLE WORD.
; THIS INSURES COMPATIBILITY WITH PRE-702 MONITORS. EARLY 702 NONSENSE
; USING 400+DTE NUMBERS LOSE. SO DO KMC/DUPS. TO ALLOW CAL11. TO STILL
; WORK ON CPUS OTHER THAN CPU ZERO, WE'LL PICK UP THE JOB'S SET CPU COMMAND
; ARGUMENT AND SET THE CPU NUMBER TO THE FIRST CPU AVAILABLE. NO CHECKING
; IS DONE AT THIS TIME TO MAKE SURE THE SELECTED CPU HAS THE PORT WE'RE
; INTERESTED IN. THAT'LL GET CAUGHT LATER.
C11OLD: HLRZ T1,P1 ;GET PORT NUMBER
CAIGE T1,10 ;DL10 PORT?
TDZA T1,T1 ;YES
MOVEI T1,.C11DT ;MUST BE A DTE
TLZ P1,777770 ;KEEP ONLY THE PORT NUMBER
DPB T1,C11TYP ;SET THE TYPE CODE
TLO P1,(C1.1NF) ;SET NEW FORMAT
IFN FTMP,<
IFN M.CPU-1,<
MOVE T1,JBTSPS##(J) ;SEE IF THE USER
TRC T1,7777 ; GAVE A SET CPU
TRCE T1,7777 ; COMMAND OR UUO
SKIPA T1,.CPCPN## ;RUN ON THIS CPU
MOVEI T1,0 ;LOCK HIM ON CPU0
DPB T1,C11CPU ;STORE IT
> ;END IFN M.CPU-1
> ;END IFN FTMP
POPJ P, ;RETURN
; HERE TO DECODE THE TYPE, CPU, PORT NUMBER, AND FUNCTION CODE
; CALL: MOVE P1,FUNCTION WORD
; PUSHJ P,C11ARG
;
; ON RETURN, W=BASE TABLE ADDR, P1=WINDOW ADDR, T1=FUNCTION CODE
C11ARG: LDB T1,C11TYP ;GET THE TYPE CODE
LDB T2,C11CPU ;GET THE CPU NUMBER
LDB T3,C11POR ;GET THE PORT NUMBER
HRRZ T4,P1 ;GET THE FUNCTION CODE
CAILE T2,M.CPU-1 ;LEGAL CPU NUMBER?
JRST ECOD16## ;NO
CAIN T1,.C11DL ;DL10?
JRST C11DLX ;YES
CAIN T1,.C11DT ;DTE-20?
JRST C11DTX ;YES
CAIN T1,.C11KD ;KDP?
JRST C11KDX ;YES
CAIN T1,.C11DR ;DMR?
JRST C11DRX ;YES
JRST ECOD17## ;ILLEGAL TYPE CODE
C11DLX:
IFE DL10XI,<JRST ECOD21##> ;NO DL10 SUPPORT
IFN DL10XI,<
; REMOVE THE FOLLOWING INSTUCTION IF DL10S ARE MADE TO WORK ON CPU1
MOVEI T2,0 ;GET THE CPU NUMBER
CAIL T3,10 ;DL10 HAS PORTS 0-7
JRST ECOD20## ;ILLEGAL PORT NUMBER
MOVE T1,T2 ;GET THE CPU NUMBER
LSH T1,3 ;TIME THE NUMBER OF DL10 PORTS PER CPU (8)
ADDI T1,(T3) ;PLUS THE PORT NUMBER
SKIPE W,DLXBAT##(T1) ;GET THE BASE TABLE FOR THIS PORT
SKIPN P1,DLXWIN##(W) ;GET THE WINDOW ADDRESS
JRST ECOD3## ;THERE ISN'T ONE
JRST C11CPN ;GO PUT US ON THE RIGHT CPU
> ;END IFN DL10XI
C11DTX:
IFE FTKL10,<JRST ECOD22##> ;NO DTE SUPPORT
IFN FTKL10,<
CAIL T3,4 ;DTE HAS PORTS 0-3
JRST ECOD20## ;ILLEGAL PORT NUMBER
MOVE T1,T2 ;THE CPU NUMBER
LSH T1,2 ;TIMES THE NUMBER OF DTES PER CPU (4)
ADDI T1,(T3) ;PLUS THE DTE NUMBER
SKIPN W,DTEBAS##(T1) ;HAVE ONE FOR THIS DTE?
JRST ECOD3## ;NO
MOVE P1,DLXWIN##(W) ;GET CPU#,,DTE#
JRST C11CPN ;GO PUT US ON THE RIGHT CPU
> ;END IFN FTKL10
C11KDX:
IFE FTKS10,<JRST ECOD23##> ;NO KDP SUPPORT
IFN FTKS10,<
CAIL T3,M.KDUP ;VALID LINE NUMBER
JRST ECOD3## ;NOPE
MOVE W,KDPBAS##(T3) ;GET BASE TABLE ADDRESS
JRST C11CPN
> ;END IFN FTKS10
C11DRX:
IFE FTKS10,<JRST ECOD24##> ;NO DMR SUPPORT
IFN FTKS10,<
CAIL T3,M.DMRN ;VALID LINE NUMBER
JRST ECOD3## ;NOPE
MOVE W,DMRBAS##(T3) ;GET BASE TABLE ADDRESS
> ;END IFN FTKS10
C11CPN:
IFE FTMP,<JUMPN T2,ECOD16##> ;WEED OUT JUNK CPU NUMBERS
IFN FTMP,<
IFN M.CPU-1,<
MOVE T1,T2 ;GET THE CPU NUMBER
PUSHJ P,ONCPUS## ;SWITCH TO THAT CPU
JRST ECOD16## ;CPU NOT RUNNING
> ;END IFN M.CPU-1
> ;END IFN FTMP
HRRZ T1,T4 ;GET THE FUNCTION CODE
JRST CPOPJ1## ;AND RETURN
; BYTE POINTERS TO FIELDS IN THE FUNCTION WORD
C11TYP: POINT 3,P1,11 ;TYPE CODE
C11CPU: POINT 3,P1,14 ;CPU NUMBER
C11POR: POINT 3,P1,17 ;PORT NUMBER
CAL11N::MOVE T1,DLXNMT##(W) ;GET NAME
JRST STOTC1## ;AND RETURN
CAL11T::SKIPE T1,DLXFEK##(W) ;GET ADDRESS OF FEK
HRLZ T1,FEKNNM(T1) ;GET NODE NUMBER (IF ANY)
HRR T1,DLXTYP##(W) ;GET TYPE OF FRONT END
JRST STOTC1## ;RETURN
CAL11S::SKIPE T1,DLXFEK##(W) ;GET ADDR OF FEK FOR THIS PORT
SKIPL T1,FEKBLK(T1) ;SKIP IF PORT UP
TDZA T1,T1 ;DOWN
MOVEI T1,1 ;UP
JRST STOTC1## ;SKIP RETURN
;COME HERE ONCE A SECOND.
IFN FTKS10*M.DN60,<
DLXSEC::PUSH P,P1 ;SAVE P1 FOR A BIT
IFN M.DN6K*M.KDUP,< ;IF ON A KS10 WITH IBM COMM
MOVE P1,[XWD -M.KDUP,KDPBAS] ;GET AN AOBJN POINTER TO THE BASE TABLE
DLXSE1: MOVE W,(P1) ;GET THE NEXT LINE
PUSHJ P,D6KSEC## ;SET DN60 TIME OUT THE CALL11 FUNCTIONS
AOBJN P1,DLXSE1 ;LOOP OVER ALL LINES
>;M.DN6K
IFN M.DN6R*M.DMRN,< ;IF ON A KS10 WITH IBM COMM
MOVE P1,[XWD -M.DMRN,DMRBAS] ;GET AN AOBJN POINTER TO THE BASE TABLE
DLXSE2: MOVE W,(P1) ;GET THE NEXT LINE
PUSHJ P,D6KSEC## ;SET DN60 TIME OUT THE CALL11 FUNCTIONS
AOBJN P1,DLXSE2 ;LOOP OVER ALL LINES
>;M.DN6R
POP P,P1 ;RESTORE P1
POPJ P, ; AND RETURN
>; END IFN FTKS10
IFE FTKS10*M.DN60,< ;IF NOT ON A KS10 WITH IBM COMM
IFE DL10XI,<DLXSEC==:CPOPJ##>
IFN DL10XI,<
DLXSEC::
IFN M.CPU-1,<
SKIPE .CPCPN## ;DL10'S CAN ONLY BE ON CPU0
POPJ P,
>
PUSHJ P,SAVE3## ;SAVE P1-P3
MOVSI P1,-10 ;AOBJN POINTER
D76SC1: SKIPN P2,DLXBAT##(P1) ;GET BASE ADDRESS OF THIS PDP11
JRST D76S1L ;NO.
SKIPN P3,DLXWIN##(P2) ;HAS IT A WINDOW?
JRST D76S1L ;NO WINDOW IS NO GOOD
SKIPG DLXDWN##(P3) ;IS THIS PDP11 UP?
JRST D76NTR ;NO.
SKIPN DLXHLT##(P3) ;YES, IS IT HALTED?
JRST D76S2L ;NO.
D76DWN: SKIPG DLXDWN##(P3) ;DO I THINK THE PDP11 IS UP?
JRST D76S1L ;NO.
XCT DLXCLR##(P2) ;YES, CLEAR ITS ENABLE.
SETZM DLXDWN##(P3) ;AND MARK IT DOWN.
XCT DLXPRG##(P2) ;DO ANY NECESSARY CLEAN UPS
MOVE T1,P1 ;GET PORT #
PUSHJ P,DL10EL ;LOG ERROR
MOVSI T1,(JFCL) ;DISABLE ITS SERVICE ROUTINE
MOVEM T1,DLXINI##(P2)
SETZM DLXCAL##(P2)
MOVEM T1,DLXPRG##(P2)
D76S1L: AOBJN P1,D76SC1 ;TRY NEXT PDP11.
POPJ P, ;NO MORE, ALL DONE.
D76S2L: AOS T1,DLXOK##(P3) ;COUNT THE "OK" COUNTER
CAIL T1,^D10 ;IS THE PDP11 STILL OK?
JRST D76DWN ;NO, IT HAS GONE DOWN.
JRST D76S1L ;YES, GO ON TO NEXT PDP11.
;COME HERE IF A PDP11 IS NOT RUNNING.
D76NTR: XCT DLXCNI##(P2) ;CONI DLC,T1
MOVEI T2,22220 ;PORT ENABLE BITS
ANDCM T2,T1 ;T2 GETS A 1 FOR EACH PDP11
; NOT ENABLED
LSH T2,-1 ;MOVE TO INTERRUPT BIT
AND T2,T1 ;1 FOR EACH PDP11 LOADED BUT NOT
; YET STARTED.
AND T2,DLXMSK##(P2) ;MASK OFF BITS FOR OTHER PDP11S
JUMPE T2,D76S1L ;JUMP IF NOT OUR PDP11
SETZM DLXOK##(P3) ;NOT CRASHED YET
SETZM DLXHLT##(P3) ;NOR HALTED
SETZM TTP(P3) ;CLEAR THE Q'S
SETZM TTG(P3) ;CLEAR THE Q'S
SETZM TEP(P3) ;CLEAR THE Q'S
SETZM TEG(P3) ;CLEAR THE Q'S
SETZM DLXCEU##(P2) ;NO CAL11. USER
MOVSI T1,767760 ;BUILD SIX BIT DL10 BYTE POINTER
HRRI T1,DLXNMT##(P2) ;INTO DL10 BASE TABLE
SETZM (T1) ;ZAP OLD NAME
MOVEM T1,DLXNAM##(P3) ;STORE POINTER TO NAME
MOVEI T1,2 ;KILL IF NO RESPONSE IN 2 SEC
MOVEM T1,DLXDWN##(P3) ; BY MARKING PDP11 AS UP
MOVE T1,[PUSHJ P,D76CKN] ;CHECK NAME ON INTERRUPT
MOVEM T1,DLXINI##(P2)
XCT DLXKAX##(P2) ;SPECIFY KA10 INTERRUPTS (IN CASE NOT DONE ALREADY)
XCT DLXSWA##(P2) ;SET WINDOW ADDRESS
XCT DLXENB##(P2) ;ENABLE PORT
JRST D76S1L ;WAIT FOR INTERRUPT
>; END IFN DL10XI CONDITIONAL
>; END IFE FTKS10*M.DN60
>; END IFN <PDP11N!M.KL10!M.DN60!M.KDUP!M.DMRN>
IFN PDP11N,<
;COME HERE ON NEXT DL10 INTERRUPT FOR THIS PDP11.
D76CKN: SKIPN T1,DLXNMT##(W) ;NAME SPECIFIED YET?
POPJ P, ;NO.
IFN M.DC75,<
CAMN T1,[SIXBIT /DC75/] ;YES, DC75?
JRST D75III## ;YES, START UP DC75.
>
IFN M.DC76,<
CAMN T1,[SIXBIT /DC76/] ;NO, DC76?
JRST D76III## ;YES, START UP DC76.
>
IFN DLX.60,<IFN M.DN6D,<
CAMN T1,[SIXBIT /DN60/] ;NO, DN60?
JRST D60III## ;YES, START UP DN60
>>
POPJ P, ;NO, IGNORE IT.
;COME HERE ONCE A MINUTE.
IFE DL10XI,<D76MIN==:CPOPJ##>
IFN DL10XI,<
D76MIN::SKIPGE DEBUGF## ;DEBUGGING
POPJ P, ;YES, NO MESSAGE
PUSHJ P,SAVE3## ;SAVE P1-P3
MOVE P1,UPTIME## ;GET UPTIME
CAMGE P1,TICMIN## ;MORE THAN 1 MINUTE
POPJ P, ;NO--TOO EARLY
MOVSI P1,-10 ;MAXIMUM NUMBER OF PORTS
D76MLP: SKIPE P2,DLXBAT##(P1) ;IS THIS PDP11 DEFINED?
SKIPN P3,DLXWIN##(P2) ;YES, HAS IT A WINDOW?
JRST D76MNX ;NO, LOOK AT NEXT PDP11
SKIPE DLXDWN##(P3) ;IS IT UP OR SILENCED?
JRST D76MNX ;YES.
MOVE T1,STATES## ;SCHED SETTINGS
TRNE T1,ST.NOP ;IS THERE AN OPR IN ATTENDANCE?
SETOM DLXDWN##(P3) ;NO, ONLY REPORT THE ERROR ONCE
MOVE U,OPRLDB## ;NO, PRINT MESSAGE ON OPR'S TTY
PUSHJ P,INLMES##
ASCIZ /
%%PDP-11 number /
MOVE T1,DLXEPN##(P3) ;ELEVEN PORT NUMBER
PUSHJ P,RADX10## ;PRINT THAT OUT
SKIPE DLXHLT##(P3) ;HALTED?
JRST D76HLT ;YES.
PUSHJ P,INLMES## ;NO, JUST SAY NOT UP.
ASCIZ / is not running.
/
JRST D76MNX ;CHECK NEXT PDP11
;STILL IN IFN DL10XI AND IFN PDP11N CONDITIONALS
;COME HERE IF THE PDP11 IS ACTUALLY HALTED.
D76HLT: PUSHJ P,INLMES##
ASCIZ / halted at /
MOVE T1,DLXHLT##(P3) ;GET HALT PC (OR STOP CODE)
PUSHJ P,OCTPNT## ;TYPE IT OUT
PUSHJ P,INLMES## ;END WITH A DOT
ASCIZ /.
/
D76MNX: AOBJN P1,D76MLP ;CHECK THE REST OF THE PDP11S
POPJ P, ;DONE THEM ALL--RETURN.
$LOW
> ;END OF IFN DL10XI CONDITIONAL
> ;END OF IFN PDP11N
SUBTTL LOCATE & WHERE COMMAND/UUOS
IFE M.NET,<
$HIGH
NODE.C::
HOST.C::
NETASG==:CPOPJ1##
IFE <M.DAS78!M.DN60>,<
CLOCAT::
CWHERE::
> ;END IFE M.DN60
MOVSI T1,JLOG ;IF NOT
TDNN T1,JBTSTS##(J) ;LOGGED IN
DPB T1,PJOBN## ;DON'T LEAVE GHOST JOB
JSP T1,ERRMES## ;CAN'T DO THESE IF NO NETWORK
ASCIZ /No network, DAS78, or DN60 software
/
$LOW
> ;END IFE M.NET .IF M.NET=0 & M.DAS78!M.DN60, ONLY 1 LABEL, NETASG
; IF BOTH=0,3LABELS
IFN <M.NET!M.DAS78!M.DN60>,<
$HIGH
;LOCATE COMMAND TO PLACE A JOB AT A REMOTE STATION SITE
CLOCAT::
JSP T2,SAVCTX## ;MUST SCHEDULE THIS COMMAND
NETDBJ ;INTERLOCK THIS CODE WITH NETSER
PUSHJ P,CTEXT1## ;GET THE ARGUMENT IN SIXBIT
SKIPN T1,T2 ;COPY TO T1
JRST LOCTHS ;NO ARGUMENT
PUSHJ P,CVTOCT## ;TRY TO CONVERT TO OCTAL
MOVE T1,T2 ;CAN'T-GET THE NAME BACK
LOCLC1:
IFN M.NET,<
PUSH P,T1 ;SAVE THE ARG
PUSHJ P,SRCNDB## ;SEARCH FOR THE NODE BLOCK
>;END IFN M.NET
JRST LOCNOT ;DOES NOT EXIST
IFN M.NET,<
HLRZ T1,NDBNNM##(W) ;YES, GET THE NODE NUMBER
CAILE T1,77 ;KEEP IT REASONABLE
JRST LOCBIG ; FOR BATCH
HRRZM T1,JBTLOC##(J) ;LOCATE HIM WHERE HE WANTS
POP P,(P) ;RESTORE THE STACK
PUSHJ P,TYPNDB## ;TYPE THE NODE NAME
JSP T1,CONMES## ;EXIT TO COMDEV
ASCIZ / Located
/
>;END IFN M.NET
LOCTHS: PUSHJ P,FNDSTA## ;GET STA NUMBER OF CONTROL TTY
JRST LOCLC1 ;AND GO LOCATE HIM
LOCNOT:
IFN M.NET,<
POP P,T1 ;RESTORE THE ARG
>;END IFN M.NET
CAIG T1,77 ;IS IT A NUMBER
IFN M.NET,<
JUMPG T1,LOCNO1 ;YES, WILL ALLOW THE LOCATE TO HAPPEN
HRRZ T1,NRTUNN## ;NO, UNDEFINE NETWORK NODE
>;END IFN M.NET
IFE M.NET,<
JUMPGE T1,LOCNO1 ;YES, WILL ALLOW THE LOCATE TO HAPPEN
HRRZI T1,[ASCIZ \Invalid station address\] ;NO.
>;END IFE M.NET
PJRST ERRMES## ;TYPE IT
LOCNO1: HRRZM T1,JBTLOC##(J) ;STORE THE LOCATION
PUSHJ P,INLMES## ;TYPE A MESSAGE
IFN M.NET,<
ASCIZ /%Node (/
>
IFE M.NET,<
ASCIZ /Station /
>
HRRZ T1,JBTLOC##(J) ;GET THE NUMBER
PUSHJ P,PRTDI8## ;PRINT THE NUMBER
PUSHJ P,INLMES## ;AND A COMMENT
IFN M.NET,<
ASCIZ /) Located but off-line
/
>;END IFN M.NET
IFE M.NET,<
ASCIZ / Located
/
>;END IFE M.NET
POPJ P, ;RETURN
IFN M.NET,<
LOCBIG: POP P,T1 ;RESTORE THE ARG
MOVEI T1,[ASCIZ/Station number out of range/] ;LOAD ERROR
PJRST ERRMES## ;TYPE IT AND RETURN
>;END IFN M.NET
;WHERE COMMAND - SIMILAR TO WHERE UUO
;THE LOCATION OF A DEVICE IS TYPED ON THE USER'S TTY
CWHERE::JSP T2,SAVCTX## ;SAVE THE CONTEXT OF THE JOB
IFN FTMP,<PUSHJ P,ONCPU0##> ;TEMPORARY AVOID COMCON RACE
NETDBJ ;INTERLOCK THIS WITH NETSER
PUSHJ P,CTEXT1## ;GET FIRST ARG = SIXBIT DEV NAME
IFN M.NET,<
PUSHJ P,NETASG## ;SEE IF IT'S OF THE FORM "NODE_DEV"
; AND IF IT IS, CHANGE IT TO "GGGNNU"
POPJ P, ;HERE IF ERROR IN NAME. (MSG ALREADY PRINTED)
>;END IFN M.NET
PUSH P,T2 ;SAVE 6 BIT
PUSHJ P,FNDSTA## ;GET OUR STATION
POP P,T2 ;GET 6 BIT NAME
MOVE T1,T2 ;INTO T1
PUSH P,U ;SAVE U
PUSHJ P,DVCNSG## ;SEARCH FOR PHYSICAL DEV NAME
JRST NOTDV1## ;PRINT "NO SUCH DEVICE"
PUSHJ P,FNDDEV ;FIND LOCATION
IFN M.NET,<MOVE U,(P)> ;RETRIEVE U (MAYBE LDB)
LDB T2,[POINT 6,DEVTYP(F),9] ;GET TYPE OF DEVICE
IFN M.NET,<
IFN M.DAS78,<
CAIN T2,.TYD78/.TYEST ;IS IT A DAS78?
JRST WCMD78 ;YES
> ;END IFN M.DAS78
> ;END IFN M.NET
IFE M.NET,<JRST UPOPJ##> ;RESTORE U AND RETURN
IFN M.NET,<
CAIE T2,.TYTTY/.TYEST;IS IT A TTY?
JRST CWHANF ;NO, JUST REGULAR DEVICE
MOVE U,DDBLDB(F) ;GET TARGET TTY'S LDB
SE1XCT <MOVE T4,LDBTTW##(U)> ;GET THE TTY USE FLAGS
TLNN T4,LTLUSE## ;IS TTY IN USE?
JRST CWHNCN ;NO, JUST SAY "NOT CONNECTED"
IFN M.DECN,< ;IF DECNET,
TLNE T4,LTLNRT## ;IF NRT/CTERM
JRST CWHNRT## ;LET NRTSER TYPE IT OUT
> ;END IFN M.DECN
IFN M.LATN,< ;IF ETHERNET/LAT
TLNE T4,LTLLAT## ;IF LAT TERMINAL
PJRST CWHLAT## ;LET LATSER TYPE IT OUT
> ;END IFN M.LATN
;FALL INTO ANF/LOCAL TTY TYPEOUT
;STILL IFN M.NET
CWHANF::MOVE U,0(P) ;COMMAND TTY LDB
PUSHJ P,SRCNDB## ;SEARCH FOR THE NDB
MOVEI W,NETNDB## ;USE THE LOCAL MODE
PUSHJ P,TYPNDB## ;TYPE THE NODE INFO
PUSHJ P,PRSPC##
MOVE T2,DEVNAM(F)
PUSHJ P,PRNAME##
MOVSI T1,DVTTY ;CHECK FOR A TTY
TDNN T1,DEVMOD(F) ;IS DEVICE A TTY?
JRST [PUSHJ P,ZAPNET## ;NO, FREE DDB IF APPROPRIATE
POP P,U ;AND EXIT
PJRST CRLF##]
MOVE U,DDBLDB##(F) ;YES, GET THE LDB
SE1XCT <LDB T1,LDPLNO##> ;GET THE LOCAL LINE NUMBER
MOVSI T2,LTLANF## ;ANF NETWORK VIRTUAL TERMINAL FLAG
SE1XCT <TDNE T2,LDBTTW##(U)> ;CHECK A BIT
SE1XCT <LDB T1,LDPRLN##> ;GET REMOTE LINE NUMBER
POP P,U ;RESTORE THE LDB
PUSH P,T1 ;SAVE LINE NUMBER
PUSHJ P,INLMES## ;TYPE OUT
ASCIZ / line # /
POP P,T1 ;RESTORE LINE NUMBER
PUSHJ P,PRTDI8## ;TYPE IT
PJRST PCRLF## ;AND CRLF
CWHNCN::MOVE U,0(P) ;RETRIEVE COMMAND TERMINAL LDB FOR TYPEOUT
PUSHJ P,INLMES## ;DEVICE IS NOT CONNECTED . . .
ASCIZ \Device \
MOVE T2,DEVNAM(F) ;GRAB THE DEVICE NAME
PUSHJ P,PRNAME## ;AND TYPE IT OUT
PUSHJ P,INLMES## ;NOT CONNECTED
ASCIZ / not connected
/
PUSHJ P,TTYKLQ## ;ZAP THE USELESS DDB
POP P,U
POPJ P, ;RETURN
>;END IFN M.NET
IFN M.DAS78,<
WCMD78: POP P,U ;RESTORE LDB
PUSHJ P,INLMES## ;PRINT THE MESSAGE
ASCIZ \NODE \
IFN M.NET,<
MOVE T2,STANAM## ;CENTRAL STATION NAME
PUSHJ P,PRNAME## ;PRINT CENTRAL NAME
>;END IFN M.NET
MOVEI T3,"(" ;LEFT PAREN
PUSHJ P,COMTYO## ;TYPE IT
LDB T1,PDVSTA## ;GET STATION #
PUSHJ P,PRTDI8## ;PRINT IT
PUSHJ P,INLMES## ;
ASCIZ \) \ ;
MOVEI T1,CONFIG## ;SYSTEM NAME
PUSHJ P,CONMES## ;PRINT IT
PUSHJ P,PRSPC## ;SPACE
MOVEI T1,SYSDAT## ;DATE
PJRST CONMES## ;
>;END IFN M.DAS78
;ROUTINE TO FIND LOCATION OF A DEVICE
;RETURN WITH T1=LOCATION
FNDDEV::LDB T1,PDVSTA## ;GET DDB LOCATION
MOVSI T2,DVTTY ;SEE IF
TDNN T2,DEVMOD(F) ; TTY
POPJ P, ;NO.
MOVE U,DDBLDB##(F) ;YES, SET UP U
PJRST FNDSTA## ;AND COMPUTE FROM LDB
;WHERE UUO
;IF AC CONTAINS 0 TO 17 THE CALLER WANTS THE LOCATION OF THE DEVICE
;INITED ON THE CHANNEL NUMBER SPECIFIED IN AC. LH(AC) = STA STATUS BITS
;IF AC IS GREATER THAN 17 IT IS ASSUMED TO BE A SIXBIT DEVICE NAME
;THAT THE CALLER WISHES TO KNOW THE STATION OF. LH(AC) = STA STATUS BITS
WHERE::
IFN FTMP,< ;TEMPORARY
PUSHJ P,ONCPU0## ;AVOID COMCON RACE
>
NETDBJ ;INTERLOCK THIS WITH NETSER
CAMN T1,[SIXBIT/OPR/] ;IS IT AN OPR
JRST [HRRZ T1,JBTLOC##(J) ;YES, GET THE JOB LOCATION
PJRST STOTC1##] ;RETURN LOCATION OF THE JOB
PUSHJ P,DVCNSG## ;SEARCH FOR DEVICE OR CHANNEL
JRST RTZER## ;NONE--RETURN ERROR AS 0.
PUSHJ P,FNDDEV ;GET STATION NUMBER
JUMPN T1,WHER1 ;USE IT IF NON ZERO
IFN M.DAS78,<
LDB T2,[POINT 6,DEVSTA(F),9] ;GET TYPE OF DEVICE
CAIE T2,.TYD78/.TYEST ;IF DAS78 DEV LEAVE IT 0
> ;END IFN M.DAS78
MOVE T1,JBTLOC## ; OTHERWISE USE CENTRAL SITE NUMBER
WHER1:
IFN FTSPL,<
SKIPN DEVCHR(F) ;IF A "FAKE" DDB,
HRRZ T1,JBTLOC##(J) ;TELL WHERE JOB IS
>
IFN M.DAS78,<
IFN M.NET,<
LDB T2,[POINT 6,DEVSTA(F),9] ;GET DEVICE TYPE
CAIE T2,.TYD78/.TYEST ;SKIP IF A DAS78 DEVICE
> ;END IFN M.NET
IFE M.NET,<
JRST STOTC1## ;STATUS BITS TO 0 AND RETURN
> ;END IFE M.NET
> ;END IFN M.DAS78
IFN M.NET,<
CAMN T1,JBTLOC## ;CENTRAL SITE?
JRST STOTC1## ;YES, STATUS BITS ALL ZERO.
PUSHJ P,SRCNDB## ;FIND THE NODE BLOCK
JRST RTZER## ;DOES NO EXIST
HLRZ T1,NDBNNM##(W) ;GET THE NODE NUMBER
; HLL T1,SCBSTS##(W) ;GET THE STATUS BITS
>;END IFN M.NET
JRST STOTC1## ;STORE T1 IN USER'S AC
;LOCATE UUO (CALLI 62)
;PLACES THE CALLER AT THE DESIRED STATION SITE
;CALL: AC HAS STATION NAME OR NUMBER TO LOCATE AT
LOCATE::
NETDBJ ;INTERLOCK THIS WITH NETSER
SKIPN F,TTYTAB##(J) ;POINT TO JOB'S TTY
JRST LOCAT3 ;NONE.
CAME T1,[EXP -1] ;IF ARG IS -1...
JRST LOCAT3 ;NO
PUSHJ P,FNDDEV ;PUT JOB WHERE TTY IS
JRST LOCAT4 ;LOCATE THE JOB
LOCAT3: MOVE T2,T1 ;COPY ARGUMENT
PUSHJ P,CVTOCT## ;CONVERT TO OCTAL
MOVE T1,T2 ;CAN'T, RESTORE
JUMPE T1,LOCAT1 ;0 IMPLIES LOCAL NODE
IFN M.NET,<
TLNN T1,-1 ;LOOK LIKE A NODE NAME?
JRST LOCAT4 ;NO, MUST BE NODE NUMBER
PUSHJ P,SRCNDB## ;DO WE KNOW ABOUT IT?
POPJ P, ;NO, CAN'T LOCATE
HLRZ T1,NDBNNM##(W) ;GET NODE NUMBER
>
LOCAT4: CAILE T1,77 ;IS THE STATION IN RANGE
POPJ P, ;NO, ERROR RETURN
LOCAT2: HRRZM T1,JBTLOC##(J) ;LOCATE JOB
JRST CPOPJ1## ;GIVE GOOD RETURN
LOCAT1: MOVE T1,JBTLOC## ;CENTRAL LOCATION
JRST LOCAT2 ;PUT HIM THERE.
$LOW
>;END IFN <M.NET!M.DAS78!M.DN60>
$LIT
IFNDEF FTCMBTH,<COMEND: END>