PDP-10 Archive: int7.rnd from ap-c796e-sb

Trailing-Edge - PDP-10 Archives - ap-c796e-sb - int7.rnd
There are no other files named int7.rnd in the archive.
.;4 MAR 77 YL
\\
.LM0;.RM70;.F;.J;.FLAG CAP;.SP1;.TS5
<INITIA.DOC -- ^CHANGES FROM ^V6 TO ^V7(146)
.BR
^OCTOBER 1976
.FG30
^COPYRIGHT (^C) 1971,1974,1977
.BR
^DIGITAL ^EQUIPMENT ^CORPORATION, ^MAYNARD, ^MASS.
.B 2
^THIS SOFTWARE IS FURNISHED UNDER A LICENSE FOR USE ONLY ON A
SINGLE COMPUTER SYSTEM AND MAY BE COPIED ONLY WITH THE INCLUSION
OF THE ABOVE COPYRIGHT NOTICE. ^THIS SOFTWARE, OR ANY OTHER
COPIES THEREOF, MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE
TO ANY OTHER PERSON EXCEPT FOR USE ON SUCH SYSTEM AND TO ONE WHO
AGREES TO THESE LICENSE TERMS. ^TITLE TO AND OWNERSHIP OF THE
SOFTWARE SHALL AT ALL TIMES REMAIN IN ^^DEC\\.
.B 1
^THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ^DIGITAL
^EQUIPMENT ^CORPORATION.
.B 1
^^DEC\\ ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY ^^DEC\\.
.T ^^INT7.DOC\\
.PG
<INITIA.DOC -- ^CHANGES FROM ^V6 TO ^V7(146)
.BR
^OCTOBER 1976
.B 3
1.0##^^SUMMARY\\
.B 1
^THIS RELEASE INCREASES THE SCOPE OF TERMINAL SELECTION
BY IMPLEMENTING SPEED DEPENDENT OPTIONS AS SUGGESTED IN
^^QAR\\ 10-00070 AND ^NETWORK CAPABILITY.
.B 1
^THIS VERSION FULLY SUPERSEDES ALL PREVIOUS VERSIONS
AND HAS BEEN TESTED UNDER 6.02 AND 6.03.
^IT FULLY SUPPORTS THE ^^DATE\\75 PROJECT AND HAS NO KNOWN
DEFICIENCIES. ^IT CORRECTS ALL ^^SPR\\S RECEIVED THROUGH ^OCTOBER, 1976.
.B 1
^^INITIA\\ IS DOCUMENTED IN THE ^^DEC\\SYSTEM-10
^COMMAND ^MANUAL (FOR THE COMMAND OPTIONS) AND IN THE OPERATOR
PROCEDURE, ^^INITIA.OPR\\ (FOR THE FILE OPTIONS).
.B 1
^^INITIA\\ HANDLES ALL SPECIAL INITIALIZATION FOR A TERMINAL.
^IT IS INVOKED AUTOMATICALLY AT SYSTEM START-UP AND
WHENEVER A DATA-SET IS ANSWERED. ^THE USER CAN ALSO
INVOKE IT TO SELECT SPECIAL INITIALIZATIONS.
.B 3;.LM 0
2.0##<EXTERNAL <CHANGES
.B1
^EDIT _#
.B 1;.LM 10;.TS 10;.I -10
121	^BE SUSPICIOUS OF DEAD HI-SEG INTERLOCKS -- SLOWS ^^SYS\\ START UP.
.B 1;.I -10
122	^ADD ^^SYSV52\\ AND ^^SYSV61 [TTY.INI COMMANDS--SYSVFT AND SYSVSO].
.B 1;.I -10
123	\\^FIX PROBLEM WITH ^^CORE UUO\\ FAILURE.
.B 1;.I -10
124	^DON'T GIVE ALL PRIVILEGES TO REMOTE ^^OPR\\.
.B 1;.I -10
125	\\^UNKNOWN.
.B 1;.I -10
126	\\^CHANGES  TO  IMPLEMENT  '^^DETECT  XXXX'\\   FOR   SPEED
DEPENDENT SETUP OF DIAL-UP LINES, ^^'LINSPD'\\ FOR LINES
RUNNING AT SPECIFIED BAUD, AND  ^^'OTHSPD'\\  FOR  LINES
NOT AT THE SPECIFIED BAUD.
.B 1;.I -10
127	\\^ADD NETWORK CAPABILITIES FOR DIRECT ACCESS TO PHYSICAL ^^TTY\\'S.
.PG;.B 1;.I -10
130	\\^MERGE EDITS 106-107.
.B 1;.I -10
131-145	\\^INSTALL ^CONTROL-^C INTERCEPT AND CLEAN UP REMOTE STATION HANDLING.
.B 3;.LM 0;.F;.J
3.0##^^KNOWN BUGS AND DEFICIENCIES\\
.B 1
^NONE.
.B 3
4.0##^^INSTALLATION INSTRUCTIONS\\
.B 1
^NONE.
.B 3
5.0##<INTERNAL <CHANGES
.B1
^NONE.
.B3
6.0##^^SUGGESTIONS\\
.B 1
^NONE.
.B 3
[^END OF <INT7.DOC]
.B1
[<INT6.DOC IS APPENDED AS AN INTEGRAL PART OF <INT7.DOC]
.T <INT6.DOC
.PG
.LM0.RM70.F.J.FLAG CAP.SP1.TS5
<INITIA.DOC -- ^CHANGES FROM ^V5 TO ^V6
.BR
^JUNE 1976
.B3
1.0	^^SUMMARY\\
.B1
^THIS RELEASE INCREASES THE SCOPE OF TERMINAL SELECTION
BY IMPLEMENTING SPEED DEPENDENT OPTIONS AS SUGGESTED IN
^^QAR\\ 10-00070 AND ^NETWORK CAPABILITY.
.B1
^THIS VERSION FULLY SUPERSEDES ALL PREVIOUS VERSIONS
AND HAS BEEN TESTED UNDER 6.01 AND 6.02.
^IT FULLY SUPPORTS THE ^^DATE\\75 PROJECT AND HAS NO KNOWN
DEFICIENCIES. ^IT CORRECTS ALL ^^SPR\\S RECEIVED THROUGH ^JUNE, 1976.
.B1
^^INITIA\\ IS DOCUMENTED IN THE ^^DEC\\SYSTEM-10
COMMAND MANUAL (FOR THE COMMAND OPTIONS) AND IN THE OPERATOR
PROCEDURE, ^^INITIA.OPR\\ (FOR THE FILE OPTIONS).
.B1
^^INITIA\\ HANDLES ALL SPECIAL INITIALIZATION FOR A TERMINAL.
^IT IS INVOKED AUTOMATICALLY AT SYSTEM START-UP AND
WHENEVER A DATA-SET IS ANSWERED. ^THE USER CAN ALSO
INVOKE IT TO SELECT SPECIAL INITIALIZATIONS.
.B3
2.0	<EXTERNAL <CHANGES
.B1
^EDIT _#
.B1.LM9.TS9.I-9
121	^BE SUSPICIOUS OF DEAD HI-SEG INTERLOCKS -- SLOWS SYS START UP.
.B1.I-9
122	^ADD <SYSV52 AND <SYSV61 [<TTY.INI <COMMANDS--<SYSVFT AND <SYSVSO].
.B1.I-9
123	^FIX PROBLEM WITH <CORE <UUO FAILURE.
.B1.I-9
124	^DON'T GIVE ALL PRIVILEGES TO REMOTE <OPR.
.B1.I-9
125	^UNKNOWN.
.B1.I-9
126	^CHANGES  TO  IMPLEMENT  <'DETECT  <XXXX'   FOR   SPEED
DEPENDENT SETUP OF DIAL-UP LINES, <'LINSPD' FOR LINES
RUNNING AT SPECIFIED BAUD, AND  <'OTHSPD'  FOR  LINES
NOT AT THE SPECIFIED BAUD.
.B1.I-9
127	^ADD NETWORK CAPABILITIES FOR DIRECT ACCESS TO PHYSICAL <TTY'S.
.B1.I-9
130	^MERGE EDITS 126-127.
.PG.LM0.TS5
3.0	^^KNOWN BUGS AND DEFICIENCIES\\
.B1
^NONE.
.B3
4.0	^^INSTALLATION INSTRUCTIONS\\
.B1
^NONE.
.B3
5.0	<INTERNAL <CHANGES
.B1
^NONE.
.B3
6.0	^^SUGGESTIONS\\
.B1
^NONE.
.B3
[^END OF <INT6.DOC]
.B1
[<INT4.DOC IS APPENDED AS AN INTEGRAL PART OF <INT6.DOC]
.T <INT4.DOC
.PG
<INITIA.DOC -- ^CHANGES FROM ^V3 TO ^V4
.BR
^APRIL 1974
.B3
1.0	^^SUMMARY\\
.B1
^THIS RELEASE UPDATES ^^INITIA\\ TO
BE DRIVEN FROM A FILE AND TO BE ABLE TO SETUP
ALL REASONABLE ^^TRMOP_.\\ PARAMETERS.
^IN ADDITION, IT NOW WILL TAKE OPTIONAL COMMANDS TO CONTROL
THE INFORMATION WHICH IT TYPES.  ^IT CAN NOW BE ASKED
TO TYPE THE CURRENT JOB NUMBER AND USER (IF LOGGED IN),
^^NOTICE.TXT\\, ANY STRUCTURE NOTES (^^STR.TXT\\), AND THE
CURRENT ^^TTY \\ SETTINGS.
.B1
^THIS VERSION FULLY SUPERSEDES ALL PREVIOUS VERSIONS
AND HAS BEEN TESTED UNDER 5.06 AND 5.07/6.01.
^IT FULLY SUPPORTS THE ^^DATE\\75 PROJECT AND HAS NO KNOWN
DEFICIENCIES. ^IT CORRECTS ALL ^^SPR\\S RECEIVED THROUGH ^MARCH, 1974 (10-11146).
.B1
^^INITIA\\ IS DOCUMENTED IN THE ^^DEC\\SYSTEM-10
COMMAND MANUAL (FOR THE COMMAND OPTIONS) AND IN A NEW OPERATOR
PROCEDURE, ^^INITIA.OPR\\ (FOR THE FILE OPTIONS).
.B3
2.0	^^EXTERNAL CHANGES\\
.B1
^EDIT _#
.B1.LM9.TS9.I-9
40	^SUPERSEDED BY EDIT 47.
.B1.I-9
41	(^^SPR\\ 10-11146) ^CORRECT DEFAULT VALUE OF PROJECT
PROGRAMMER NUMBER FOR RUNNING ^^FILEX\\.
.B1.I-9
42	^CONVERT TO USE SYMBOLS FROM ^^C.MAC\\ AND MAKE
RESULTING PROGRAM REENTRANT.
.B1.I-9
43	^INCLUDE THE PROCESSOR SERIAL NUMBER IN THE SIGNON
MESSAGE (ALL PROCESSORS IF DUAL SYSTEM).
.B1.I-9
44	^HANDLE CASE OF BEING CALLED BY A FORCED COMMAND.
^IN PARTICULAR, TYPE "^^PLEASE LOGIN OR ATTACH\\".
.B1.I-9
45	^CHANGE THE ^^TERMINET\\-300 OPTION FROM ^^REENTER\\ TO
APPEAR ON THE COMMAND LINE.
.B1.I-9
46	^ADD AN OPTION TO THE COMMAND LINE (^^STRUCTURE\\)
WHICH WILL TYPE OUT THE FILE ^^STR.TXT\\[1,4] FROM
EACH STRUCTURE.  ^THIS WILL ALLOW THE OPERATOR TO LEAVE
NOTES FOR THE USERS ABOUT A STRUCTURE (SUCH AS THE DATE OF THE
LAST REFRESH-RESTORE).
.PG.I-9
47	^LOOK AT FILE ^^SYS:TTY.INI\\ TO GET OPTIONS.  ^EVERY
LINE IS EXAMINED TO SEE IF IT APPLIES TO THIS TERMINAL.  ^LINES
START WITH ^^ALL\\ (APPLIES TO ALL TERMINALS), ^^OTHER\\
(APPLIES ONLY IF NO SPECIFIC LINE HAS YET BEEN FOUND
FOR THIS TERMINAL), ^^TTY\\X (APPLIES TO JUST ^^TTY\\X--COULD
ALSO BE ^^CTY\\), AND ^^TTY\\A-B OR ^^TTY\\A-^^TTY\\B
(APPLIES TO ANY TERMINAL IN THE RANGE OF A TO B).
.B1.I-9
50	^ADD ^^TTY.INI\\ OPTIONS TO SET ALL
^^TRMOP\\.S.
.B1.I-9
51	^ADD OPTION ^^HELP\\ AND CALL ^^HELPER\\.
.B1.I-9
52	^ADD OPTION ^^KSYS\\ TO OUTPUT THE CURRENT SYSTEM
GOING DOWN (TIMESHARING WILL CEASE) MESSAGE IF SET.
.B1.I-9
53	^ADD THE JOB NUMBER AND USER'S NAME IF THE JOB IS
LOGGED IN.
.B1.I-9
54	^WHEN AUTOMATICALLY LOGGING IN A JOB, TYPE THE LINE
".^^LOGIN\\ P,PN".
.B1.I-9
55	^ADD OPTION ^^NOTICE\\ TO TYPE ^^SYS:NOTICE.TXT\\.
.B1.I-9
56	^ADD OPTION ^^TTY\\ TO TYPE THE CURRENT SETTINGS
OF ALL READABLE ^^TRMOP.\\S. ^NOTE THAT THIS IS NOT DESIGNED
TO DISPLAY THE ^^TRMOP.\\ VALUES SO MUCH AS TO AID THE
DEBUGGING PROCESS FOR THE ^^TTY.INI\\ FILE.
^THERE SHOULD BE A GENERAL PROGRAM TO DISPLAY THE CURRENT TERMINAL
AND JOB PROFILE TO HANDLE ALL PARAMETERS IN A SIMPLE,
COHERENT, AND WELL DOCUMENTED WAY.
.B1.I-9
57	^WHEN LOGGING A JOB IN AUTOMATICALLY, READ ^^SYS:AUXACC.SYS\\
TO GET ITS CORRECT SEARCH LIST IF POSSIBLE.
.B1.I-9
60	^IMPLEMENT OPTION ^^DIAL\\ TO CONTROL THE AUTO-DIALER.
.B1.I-9
61	^ALLOW CONTINUATION AND COMMENTS IN THE
^^TTY.INI\\ FILE.
.B1.I-9
62	^ENSURE THAT THE "." IS TYPED ONLY ONCE AT EXIT
TIME.
.B1.I-9
63	^CHANGE TO USE ^^C.MAC\\ AS A UNIVERSAL FILE.
.B1.I-9
64	^ADD THE COMMAND OPTION ^^NONAME\\ (AND THE DEFAULT
VALUE, ^^NAME\\) TO SUPPRESS THE PRINTING OF THE SYSTEM
NAME, PROCESSOR SERIAL NUMBERS, AND USER'S JOB NUMBER
AND NAME.
.B1.I-9
65	^ADD THE COMMAND OPTION ^^NORUN\\ TO SUPPRESS RUNNING
THE OPERATOR JOB, IF ANY, SPECIFIED IN ^^SYS:TTY.INI\\.
.B1.I-9
66	^ADD THE COMMAND OPTION ^^NOSETTTY\\ (AND THE DEFAULT
VALUE, ^^SETTTY\\) TO SUPPRESS SETTING UP THE TERMINAL
FROM THE COMMAND FILE.
.PG.I-9
67	^IF THE JOB IS LOGGED IN, THEN ALSO LOOK
THROUGH ^^DSK:SWITCH.INI[,]/PHYSICAL\\ FOR LINES WHICH
START "^^INITIA\\" OR "^^INITIA:\\TTYXXXX" WHERE THE
FORMER IS ASSUMED TO APPLY TO ANY TTY, AND THE LATTER
TO ANY TTY MATCHING ACCORDING TO THE SAME RULES AS
^^TTY.INI\\.  ^COMMANDS IN ^^SWITCH.INI\\ OVERRIDE THOSE IN
^^TTY.INI\\, BUT NOT THOSE ON THE COMMAND LINE.
.B1.I-9
70	^ALLOW ^T^T AS SYNONOMOUS TO ^^TTY\\ AS THE GENERIC
PREFIX FOR TERMINALS.  ^THUS, FOR EXAMPLE, ^^TTY40\\ CAN BE
REFERED TO AS ^^TT40\\. ^THIS AGREES WITH THE ^^DEC\\ COMMAND
LANGUAGE STANDARDIZATION OF DEVICE NAMES.
.B1.I-9
71	^MAKE THE DEFAULT WHEN LOGGED IN BE ^^NOSETTTY\\.
^IF THE USER WISHES TO SETUP HIS TERMINAL FROM ^^SWITCH.INI\\,
HE MUST INCLUDE A ^^SETTTY\\ IN ^^SWITCH.INI\\.
.B1.I-9
72	^ARRANGE THE ORDER OF TYPEOUT IN RESPONSE TO THE
^^TTY\\ REQUEST SUCH THAT THE ^^SLAVE, HDX\\, AND ^^REMOTE\\
INDICATORS APPEAR ON A SEPARATE LINE SINCE THEY ARE NOT
CHANGEABLE BY THE USER.
.B1.I-9
73	^FIX BUGS IN THE ABOVE REPORTED BY ^^WPI\\ ON ^^QAR\\-1563.
.B1.I-9
74	^ALLOW ^^.INI\\ LINES TO GIVE A LIST OF ^^TTY\\S OR
RANGES BY ENCLOSING THE LIST IN PARENTHESIS.  ^FOR
EXAMPLE:
EAK
^^(TTY1,TTY3-5,TTY60) \\OPTIONS
.BR
^^INITIA:(TTY1,TTY3-5,TTY60)\\ OPTIONS
.B3.LM0.TS5
3.0	^^KNOWN BUGS AND DEFICIENCIES\\
.B1
^NONE.
.B3
4.0	^^INSTALLATION INTRUCTIONS\\
.B1
^ASSEMBLE USING ^C AS A UNIVERSAL FILE INSTEAD OF
AS A PARAMETER FILE.  ^PLACE ONTO ^^SYS:\\ A FILE (OPTIONAL)
NAMED ^^TTY.INI\\ WHICH CONTAINS THE SETUP INSTRUCTIONS
FOR EACH TERMINAL IN THE SYSTEM.
^REMOVE ^^INITIA.SAV\\ FROM ^^SYS:\\ AND ADD FILE
^^INITIA.SHR\\ (NOTE THE CHANGE OF EXTENSION).
.B1
^NOTE THAT IT MAY NOW BE DESIRABLE TO SET MOST OR ALL TERMINALS
TO BE AUTOMATICALLY "^^INITIA\\ED" AT SYSTEM STARTUP.
^IN MONITORS BEFORE 6.01/5.07 THIS CAN RESULT IN JOB CAPACITY
EXCEEDED MESSAGES TO SOME OF THE TERMINALS.  ^IN 6.01/5.07,
THE EXCESS ^^INITIA\\ COMMANDS ARE DELAYED UNTIL JOB SLOTS ARE
AVAILABLE.  ^THIS CAN STILL RESULT IN THE FOLLOWING UNEXPECTED
RESULT FOR USERS; THAT IF USERS START TRYING TO ^^LOGIN\\
WHILE THE SYSTEM IS FLOODED WITH ^^INITIA\\S, THEY WILL GET
JOB CAPACITY EXCEEDED MESSAGES.
.PG
5.0	<INTERNAL <CHANGES
.B1
^NONE.
.B3
6.0	^^SUGGESTIONS\\
.B1
^DEDUCE FROM EXAMINING THE OTHER JOBS ON THE SYSTEM WHETHER
THERE ARE ANY DETACHED JOBS.  ^IF NOT, THEN SUPPRESS THE
"OR ATTACH" MESSAGE WHEN RESPONDING TO THE FORCED "^^.HELLO\\"
COMMAND (DATASET ANSWER).
.B1
^SPEED UP INITIAL SYSTEM START-UP BY READING THE ^^TTY.INI\\
AND ^^STR.TXT\\ AND ^^NOTICE.TXT\\ FILES INTO THE HIGH
SEGMENT AND USING THEM FROM THERE INSTEAD OF HAVING EVERY
TERMINAL READING THEM SIMULTANEOUSLY.
.B3
[^END OF <INT4.DOC]
.B1
[<INT3.DOC IS APPENDED AS AN INTEGRAL PART OF <INT4.DOC]
.T <INT3.DOC
.PG
<INITIA.DOC -- ^CHANGES FROM ^V2^A TO ^V3
.BR
^OCTOBER 1971
.B3
1.0	<SUMMARY
.B1
^THIS CHANGE ADDS THE CAPABILITY TO SETUP TERMINET TABS ON ANY
LINE.  ^OTHER CHANGES ARE RELATED TO THE GENERAL CLEANUP THIS MONTH.
.B1
^THIS VERSION SUPERSEDES ALL PREVIOUS VERSIONS.  ^IT RUNS ON ALL
<TOPS-10 MONITORS.  ^IT HAS NO KNOWN DEFICIENCIES.
.B1
<INITIA IS DOCUMENTED IN THE ^MONITOR ^COMMAND ^MANUAL OF THE
^SOFTWARE ^NOTEBOOK AND IN THE SPECIFICATION FILE <INITIA.RNO
(^VOL. 7 OF THE NOTEBOOKS).
.B3
2.0	<EXTERNAL <CHANGES
.B1
^IF <REE<NTER IS TYPED AFTER RUNNING <INITIA, IT WILL SETUP TERMINET
TABS.
.B3
3.0	^^  KNOWN BUGS AND DEFICIENCIES\\
.B1
^NONE.
.B3
4.0	<INSTALLATION <INSTRUCTIONS
.B1
^RUN THE BATCH JOB <INITIA.CTL
.B3
5.0	<INTERNAL <CHANGES
.B1
^CHANGE FORMAT OF VERSION NUMBER.
.B1
^CHANGE <JOBDAT SYMBOLS TO <.JBXXX.
.B3
[^END OF <INT3.DOC]