Trailing-Edge
-
PDP-10 Archives
-
SRI_NIC_PERM_SRC_1_19910112
-
7/galaxy-sources/lptusr.mac
There are 11 other files named lptusr.mac in the archive. Click here to see a list.
TITLE LPTUSR - LPTSPL SUPPORT FOR TERMINAL SPOOLING
SUBTTL Preliminaries
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SEARCH LPTMAC ;SEARCH LPTSPL PARAMETERS
SEARCH GLXMAC ;SEARCH GALAXY PARAMETERS
PROLOGUE(LPTUSR)
SEARCH QSRMAC ;SEARCH QUASAR PARAMETERS
SEARCH ORNMAC ;SEARCH ORION/OPR PARAMETERS
SEARCH MONSYM,MACSYM
USRMAN==:0 ;Maintenance edit number
USRDEV==:4 ;Development edit number
VERSIN (USR) ;Generate edit number
SUBTTL Revision history
COMMENT \
***** Release 6.0 -- begin development edits *****
1 6.1061 6-Nov-87
Create LPTUSR for terminal characteristic definitions. Also, all user
modification should be made in this module.
2 6.1072 12-Nov-87
Add defintion for LN03 and LQP02.
3 6.1141 14-Dec-87
Add definition for LA50, LA75, LA100
4 6.1225 8-Mar-88
Update copyright notice.
\ ;End of revision history
INTERN TTYTAB,TABEND
;The layout of the terminal descriptor blocks is as follows:
;$TDCHR==:0 ;TERMINAL CHARACTERISTIC
;$TDTYP==:1 ;TERMINAL TYPE
;$TDMOD==:2 ;JFN MODE WORD
;$TDCC1==:3 ;CCOC WORD 1
;$TDCC2==:4 ;CCOC WORD 2
;$TDFLG==:5 ;FLAGS
;$TDPOL==:6 ;POLLING CHARACTERS F.I. ETX,,ACK
;$TDUNU==:7 ;1 WORD RESERVED FOR FUTURE EXPANSION
;$TDLEN==:10 ;SIZE OF THE BLOCK
SUBTTL DEFINITION OF THE SUPPORTED TERMINALS
;If a terminal type is not suplied with the individual description macros's,
;the default is specified here:
;The terminal characteristic defines the terminal type.
DEFINE DFCHR$ ,<
SIXBIT /LA36/> ;DEFAULT TERMINAL CHARATERISTIC
;The terminal type is the TOPS-20 terminal type.
DEFINE DFTYP$ ,< ;DEFAULT TERMINAL TYPE
.TTL36> ;DIGITAL LA36
;The terminal mode word in the descriptor blocks should only contain the
;device related elements, such as TT%MFF, TT%TAB, TT%LCA, etc. (Refer to
;the description of the STPAR monitor call). All other fields in this word
;are ignored by LPTSPL. For most terminals the default is set by the moni-
;if the type is properly defined in STG. So the following default will do:
DEFINE DFMOD$ ,< ;DEFAULT TERMINAL MODE WORD
TT%LCA+^D66B10+^D132B17> ;DEFAULT PAGE LENGTH 66 LINES/PAGE
;132 CHAR/LINE AND LOWERCASE
;Control character output control is important to understand, because
;the operation of a terminal can be changed by sending some control cha-
;racters. F.i. some terminals allow the printing of double height or can
;go into plotting mode. This is not desirable in a spooling environment,
;therefore set the CCOC words to ignore most control characters, except
;BS, TAB, LF, FF and CR.
DEFINE DFCCO$ ,< ;DEFAULT CONTROL CHAR OUTP CONTRL
BYTE(2)0,0,0,0,0,0,0,0,2,3,3,3,3,2,0,0,0,0
BYTE(2)0,0,0,0,0,0,0,0,0,0,0,0,0,0>
DEFINE CCACT$ ,< ;ACTUAL CODE FOR ALL CONTROL CHARACTERS
BYTE(2)2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2
BYTE(2)2,2,2,2,2,2,2,2,2,2,2,2,2,2>
;The flag word can be used to specify the protocol etc.
; FL$XOF==:1B0 ;XON/XOF PROTOCOL
; FL$POL==:1B1 ;POLLING PROTOCOL
; FL$FUL==:1B2 ;FULL HEADERS,BANNERS,TRAILERS
; FL$VFU==:1B3 ;PROGRAMMABLE TERMINAL (LIKE VFU)
; FL$PGM==:1B4 ;FORCED VFU RELOAD BEFORE EACH FILE
DEFINE DFFLG$ ,< ;DEFAULT FLAG WORD
FL$XOF> ;XON/XOFF PROTOCOL
;Now we can setup a macro to make it easy to define the various terminals
DEFINE TDBLK$ (CHAR<DFCHR$>,TYPE<DFTYP$>,MODE<DFMOD$>,CCOC<DFCCO$>,FLAG<DFFLG$>,POL<0>,%%A),<
%%A: CHAR ;Terminal Characterisic
TYPE ;TYPE OF TERMINAL
MODE ;TERMINAL MODE WORD
CCOC ;CCOC WORDS (2)
FLAG ;FLAGS
POL ;POLLING CHARACTERS OUTPUT,,INPUT
BLOCK 1 ;UNUSED WORDS ARE ZEROED
>
SUBTTL TERMINAL CHARACTERISTICS
; MONITOR DEFINE TERMINAL CHARACTERISTICS
DEFPRI:: DFCHR$ ;DEFAULT TERMINAL
TTYTAB::
; TDBLK$ (SIXBIT /TTM33/,.TT33) ;TYPE 0 IS MODEL 33
; TDBLK$ (SIXBIT /TTM35/,.TT35) ;TYPE 1 IS MODEL 35
; TDBLK$ (SIXBIT /TTM37/,.TT37) ;TYPE 2 IS MODEL 37
TDBLK$ (SIXBIT /TTEXE/,.TTEXE) ;TYPE 3 IS TI/EXECUPORT
; TDBLK$ (SIXBIT /CUST/,4) ;TYPE 4 FOR CUSTOMER
; TDBLK$ (SIXBIT /CUST/,5) ;TYPE 5 FOR CUSTOMER
; TDBLK$ (SIXBIT /CUST/,6) ;TYPE 6 FOR CUSTOMER
; TDBLK$ (SIXBIT /CUST/,7) ;TYPE 7 FOR CUSTOMER
TDBLK$ (SIXBIT /DEFAUL/,.TTDEF) ;TYPE 8. IS SYSTEM DEFAULT
TDBLK$ (SIXBIT /IDEAL/,.TTIDL) ;TYPE 9. IS IDEAL
; TDBLK$ (SIXBIT /VT05/,.TT05) ;TYPE 10. IS VT05
; ;TDBLK$ (SIXBIT /VT50/,.TT50) ;TYPE 11. IS VT50
TDBLK$ (SIXBIT /LA30/,.TTL30) ;TYPE 12. IS LA30
TDBLK$ (SIXBIT /GT40/,.TTG40) ;TYPE 13. IS GT40
TDBLK$ (SIXBIT /LA36/,.TTL36) ;TYPE 14. IS LA36
; TDBLK$ (SIXBIT /VT52/,.TTV52) ;TYPE 15. IS VT52
TDBLK$ (SIXBIT /VT100/,.TT100) ;TYPE 16. IS VT100
TDBLK$ (SIXBIT /LA38/,.TTL38) ;TYPE 17. IS LA38
; TDBLK$ (SIXBIT /LA120/,.TT120) ;TYPE 18. IS LA120
TDBLK$ (SIXBIT /VT125/,.TT125) ;TYPE 35. IS VT125
; TDBLK$ (SIXBIT /VK100/,.TTL10) ;TYPE 36. IS VK100
LN03$ ;[2]LN03
LQP02$ ;[2]LQP02
LA120$ ;[2]LA120
LA50$ ;[3]LA50
LA75$ ;[3]LA75
LA100$ ;[3]LA100
TABEND==.-TTYTAB ;END OF TABLE
; DEC SUPPORT TERMINAL PRINTERS. MONITOR HAS NO KNOWLEDGE OF THESE PRINTERS
; AS TERMINALS.
;[2] Add terminal characteristic definitions for LA120, LN03 AND LQP02.
DEFINE LA120$ ,< ;TYPE 22 IS LA120
SIXBIT /LA120/ ;TERMINAL CHARACTERISTIC NAME
.TT120 ;TYPE
TT%MFF+TT%LCA+TT%TAB ;SO RESET LENGTH AND WIDTH
CCACT$ ;SEND EVERYTHING ACTUAL
FL$POL!FL$FUL ;ALWAYS LOAD VFU!
.CHCNE,,0
BLOCK 1
>
;[3]
DEFINE LA50$ ,< ;LA50
SIXBIT /LA50/ ;TERMINAL CHARACTERISTIC NAME
.TTIDL ;DEFAULT TYPE
TT%MFF+TT%LCA+TT%TAB ;SO RESET LENGTH AND WIDTH
CCACT$ ;SEND EVERYTHING ACTUAL
FL$POL!FL$FUL ;ALWAYS LOAD VFU!
.CHCNE,,0
BLOCK 1
>
;[3]
DEFINE LA75$ ,< ;LA75
SIXBIT /LA75/ ;TERMINAL CHARACTERISTIC NAME
.TTIDL ;DEFAULT TYPE
TT%MFF+TT%LCA+TT%TAB ;SO RESET LENGTH AND WIDTH
CCACT$ ;SEND EVERYTHING ACTUAL
FL$POL!FL$FUL ;ALWAYS LOAD VFU!
.CHCNE,,0
BLOCK 1
>
;[3]
DEFINE LA100$ ,< ;LA100
SIXBIT /LA100/ ;TERMINAL CHARACTERISTIC NAME
.TTIDL ;DEFAULT TYPE
TT%MFF+TT%LCA+TT%TAB ;SO RESET LENGTH AND WIDTH
CCACT$ ;SEND EVERYTHING ACTUAL
FL$POL!FL$FUL ;ALWAYS LOAD VFU!
.CHCNE,,0
BLOCK 1
>
DEFINE LN03$ ,< ;TYPE IS LN03
SIXBIT /LN03/
.TTIDL ;DEFAULT TYPE
TT%MFF+TT%LCA+TT%TAB ;SO RESET LENGTH AND WIDTH
CCACT$
FL$POL!FL$FUL
.CHCNE,,0
BLOCK 1
>
DEFINE LQP02$ ,< ;DIABLO DAISY WHEEL
SIXBIT /LQP02/ ;TERMINAL CHARACTERISTIC NAME
.TTIDL ;DIABLO = IDEAL BUT NO TABS
TT%LCA+TT%MFF ;SO JUST LOWERCASE AND FORMFEED
BYTE(2)0,0,0,2,0,0,0,0,2,3,3,0,2,2,0,0,0,0 ;ACTUAL BS,LF,FF,CR
BYTE(2)0,0,0,0,0,0,0,0,0,2,0,0,0,0 ;SIMULATE TABS
FL$POL ;POLLING FOR ONLINE CHECK
.CHCNC,,0 ;ETX/ANY PROTOCOL
BLOCK 1 ;SPARE
>
REPEAT 0,<
DEFINE TDBRL$ ,< ;BRAILLE PRINTER
SIXBIT /BRAIL/ ;TERMINAL CHARACTERISTIC NAME
.TTIDL ;TYPE
Z ;DEFAULTS
BYTE(2)0,0,0,0,0,2,0,0,2,3,3,0,2,2,0,0,0,0
BYTE(2)0,0,0,0,0,0,0,0,0,0,0,0,0,0
FL$POL ;ONLINE CHECK
.CHCNE,,0 ;ENQ,,ANY
BLOCK 1
>
DEFINE TDHP72$ ,< ;MODIFIED HYPRINT WITH 72 LINES/PAGE
SIXBIT /HYPR72/ ;TERMINAL CHARACTERISTIC NAME
.TTIDL ; SORT OF DIABLO = IDEAL BUT NO TABS AND NO FF
DFMOD$ ;LOWERCASE AND 72 LINES/PAGE
BYTE(2)0,0,0,0,0,2,0,0,2,3,3,0,3,2,0,0,0,0
BYTE(2)0,0,0,0,0,0,0,0,0,0,0,0,0,0
FL$POL
.CHCNE,,0
BLOCK 1 ;SPARE
>
DEFINE TDHP66$ ,< ;MODIFIED HYPRINT WITH 66 LINES/PAGE
SIXBIT /HYPR66/ ;TERMINAL CHARACTERISTIC NAME
.TTIDL ; SORT OF DIABLO = IDEAL BUT NO TABS AND NO FF
TT%LCA+^D66B10 ;LOWERCASE AND 66 LINES/PAGE
BYTE(2)0,0,0,0,0,2,0,0,2,3,3,0,3,2,0,0,0,0
BYTE(2)0,0,0,0,0,0,0,0,0,0,0,0,0,0
FL$POL
.CHCNE,,0
BLOCK 1 ;SPARE
>
DEFINE TDDIA$ ,< ;DIABLO DAISY WHEEL
SIXBIT /DIABLO/ ;TERMINAL CHARACTERISTIC NAME
.TTIDL ;DIABLO = IDEAL BUT NO TABS
TT%LCA+TT%MFF ;SO JUST LOWERCASE AND FORMFEED
BYTE(2)0,0,0,2,0,0,0,0,2,3,3,0,2,2,0,0,0,0 ;ACTUAL BS,LF,FF,CR
BYTE(2)0,0,0,0,0,0,0,0,0,2,0,0,0,0 ;SIMULATE TABS
FL$POL!FL$PGM ;POLLING FOR ONLINE CHECK
.CHCNC,,0 ;ETX/ANY PROTOCOL
BLOCK 1 ;SPARE
>
;TERMINET PRINTER BIJ CAB HEEFT HARDWARE FORMFEED (PAGLEN=12 INCH)
;HEEFT LOWERCASE MAAR GEEN ENKEL PROTOCOL. DUS FILLER KATAKTERS
;ZIJN NODIG. GEEN ON-LINE TEST MOGELIJK.
;DEFINE TRMNET$ ,< ;TERMINET TERMINAL, AS PLACED AT CAB
; .TTDEF
; TT%LCA+TT%MFF
; CCACT$
; Z
; Z
; BLOCK 2
; >
DEFINE TDHPHH$ ,< ;MODIFIED HYPRINT WITH 72 LINES/PAGE
SIXBIT /HYPR72/ ;TERMINAL CHARACTERISTIC NAME
.TTIDL ; SORT OF DIABLO = IDEAL BUT NO TABS AND NO FF
TT%LCA+TT%MFF ; DFMOD$ ;LOWERCASE AND 72 LINES/PAGE
BYTE(2)0,0,0,0,0,2,0,0,2,3,3,0,2,2,0,0,0,0
BYTE(2)0,0,0,0,0,0,0,0,0,0,0,0,0,0
FL$POL
.CHCNE,,0
BLOCK 1 ;SPARE
>
DEFINE TRMNET$ ,< ;TERMINET TERMINAL, AS PLACED AT CAB
SIXBIT /TERNET/ ;TERMINAL CHARACTERISTIC NAME
.TTDEF
TT%LCA+TT%MFF+^D72B10
CCACT$
FL$POL
.CHCNE,,0
BLOCK 1
>
DEFINE B600$ ,< ;600 LPM PRINTER
SIXBIT /PR600/ ;;TERMINAL CHARACTERISTIC NAME
.TT120 ;TYPE IS LA120
TT%MFF+TT%LCA+1b17 ;MECHANICAL FF,NO HARDWARE TABS,do not change width of la120
BYTE(2)0,0,0,0,0,2,0,0,1,3,2,0,2,2,0,0,0,0
BYTE(2)0,0,0,0,0,0,0,0,0,0,0,0,0,0
FL$POL ;PRINTER USES ANSWER-BACK MESSAGE AS POLL
.CHCNE,,0 ;ENQ,,ANY CHARACTER
BLOCK 1
>
;If terminal should not be used by PRISPL, we should define it in PRIGEN.BIN
;using the following macro:
DEFINE NOSPL$ ,<
TDBLK$ (-1)>
TABEL: BLOCK $TDLEN ;TTY0 DOES NOT EXIST
> ; SO FIRST CHUNK IS EMPTY
.DIRECT FLBLST
END