Enter your search terms Submit search form
	Web pdp-10.trailing-edge.com

! Fill out the country-specific parameters below followed by " |"

<GATEWAY NODE NAME> ::= xxxxxx |
<DECSYSTEM-20 NODE NAME> ::= yyyyyy |
<DECSYSTEM-20 NODE NUMBER> ::= nnn |

! The remain should be left as is

<TRAP> :== <TEXT> | <NCP>
<NCP> ::= SET EXECUTOR NODE <GATEWAY NODE NAME>
<NCP> ::= SET NODE <DECSYSTEM-20 NODE NUMBER> NAME <DECSYSTEM-20 NODE NAME>
<NCP> ::= WAIT 1
<NCP> ::= SET MODULE X25-SERVER NODE <DECSYSTEM-20 NODE NAME> DESTINATION TRAP
<NCP> ::= WAIT 1
<NCP> ::= SET MODULE X25-SERVER PRIORITY 2 DESTINATION TRAP
<NCP> ::= WAIT 1
<NCP> ::= SET MODULE X25-SERVER OBJECT X29TRAP DESTINATION TRAP
<NCP> ::= WAIT 1
<NCP> ::= SET MODULE X25-SERVER CALL MASK 01 DESTINATION TRAP
<NCP> ::= WAIT 1
<NCP> ::= SET MODULE X25-SERVER CALL VALUE 01 DESTINATION TRAP
<TEXT> ::= ! You should add any applicable conditions to the command file
<TEXT> ::= ! in order to trap the incoming calls that match those conditions.
<TEXT> ::= ! For example, one of the conditions may be the DTE address where
<TEXT> ::= ! the incoming call is originated.
<TEXT> ::= !
<TEXT> ::= ! Change the priority accordingly so that the X25-SERVER module
<TEXT> ::= ! may process the incoming calls using those conditions.
<TEXT> ::= !
<TEXT> ::= ! See the DECnet-20 System Manager's Guide for more information.
<TEXT> ::= !