Trailing-Edge
-
PDP-10 Archives
-
BB-R775E-BM
-
sources/edt/wfinslin.bli
There are 10 other files named wfinslin.bli in the archive. Click here to see a list.
%TITLE 'WFINSLIN - insert a new line'
MODULE WFINSLIN ( ! Insert a new line
IDENT = '3-003' ! File: WFINSLIN.BLI Edit: CJG3003
) =
BEGIN
!
! COPYRIGHT (c) 1981, 1985 BY
! DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! Insert a new line into the current text buffer.
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: October 16, 1978
!
! MODIFIED BY:
!
! 1-001 - Original. DJS 23-Feb-1981. This module was created by
! extracting routine EDT$$INS_LN from module EDTWF.
! 1-002 - Regularize headers. JBS 17-Mar-1981
! 1-003 - Change index for line numbers from 10 to 15. SMB 18-Jan-1982
! 1-004 - Add line number error checks and return value. SMB 3-Feb-1982
! 1-005 - Handle error return from splitting a bucket. JBS 09-Jun-1982
! 1-006 - New screen update logic. JBS 13-Sep-1982
! 1-007 - Remove EDT$$SET_WKLN. JBS 14-Sep-1982
! 1-008 - Change the call to insert lines. SMB 21-Sep-1982
! 1-009 - Modify to use new 48 bit macros. STS 01-Oct-1982
! 1-010 - Modify to use new compare macro. 20-Oct-1982
! 1-011 - Count inserted lines, and stop maintaining the screen data
! base if we have too many. JBS 21-Oct-1982
! 1-012 - The counter also counts deleted lines. JBS 27-Oct-1982
! 1-013 - Add parameters to SC_INSLN. SMB 02-Dec-1982
! 1-014 - Improve code, add consistency checking. JBS 28-Dec-1982
! 1-015 - Up the number of recs that can be inserted before SCR_REBUILD is set. SMB 16-Feb-1983
! 1-016 - Be more defensive with select position updating. JBS 28-Feb-1983
!
! 3-001 - Rewrite routine for Tops 10/20 to use word addressing. GB 17-Feb-193
! 3-002 - Zero out text area before inserting new text to fix problem with
! with bit 35 getting set when using 7 bit bytes. GB 24-Jun-1983
! 3-003 - Modify ASSERT macro to include error code. CJG 30-Jan-1984
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
EDT$$INS_LN;
!
! INCLUDE FILES:
!
REQUIRE 'EDTSRC:EDTREQ';
!
! MACROS:
!
! NONE
!
! EQUATED SYMBOLS:
!
! NONE
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
! In the routine
%SBTTL 'EDT$$INS_LN - insert a new line'
GLOBAL ROUTINE EDT$$INS_LN ( ! Insert a new line
REC_ADDR, ! Pointer to new line
REC_LEN ! Length of new line
) =
!++
! FUNCTIONAL DESCRIPTION:
!
! Insert a new line in the text buffer. If there is enough space in the
! current bucket, text is moved around to make a hole and the new line is
! inserted, otherwise, the bucket is split into two parts.
!
! FORMAL PARAMETERS:
!
! REC_ADDR the address of the new line
!
! REC_LEN the length of the new line
!
! IMPLICIT INPUTS:
!
! CUR_BUF
! WK_BUK
! WK_CURBUK
! WK_INSCNT
! WK_LN
! LNO0
! SEL_LN
! LN_PTR
! RECS_INSERTED
! SCR_LNS
!
! IMPLICIT OUTPUTS:
!
! CUR_BUF
! WK_LN
! WK_BUK
! WK_MODFD
! WK_INSCNT
! SEL_POS
! RECS_INSERTED
! SCR_REBUILD
!
! ROUTINE VALUE:
!
! 0 = insertion did not occur , 1 = successful insertion
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$$FMT_MSG,
EDT$$CMP_LNO,
EDT$$WF_MAKECUR : NOVALUE,
EDT$$WF_SPLTBUK,
EDT$$SEL_RNGPOS,
EDT$$SC_INSLN : NOVALUE;
EXTERNAL
MAX_LINES : LN_BLOCK, ! Maximum lines EDT can handle
CUR_BUF : REF TBCB_BLOCK, ! Current text buffer control block
WK_BUK : ! Pointer to current bucket
REF BLOCK [WF_BUKT_SIZE] FIELD (WFB_FIELDS),
WK_CURBUK, ! Number of the current bucket
WK_INSCNT : LN_BLOCK, ! The count of inserted lines
WK_LN : REF LIN_BLOCK, ! Pointer to current line
WK_MODFD, ! Flag indicating bucket was modified
LNO0 : LNOVECTOR [14],
SEL_POS, ! Select position
LN_PTR, ! Pointer into line buffer
LN_BUF, ! The line buffer
SEL_LN, ! Select line
SCR_LNS, ! The number of text lines on the screen
RECS_INSERTED, ! Number of records inserted and deleted since the last screen update
SCR_REBUILD; ! 1 = the screen data structures must be rebuilt from the work file
MESSAGES ((MAXLINVAL, INSMEM));
LOCAL
OLD_NEXT,
INS_LEN;
!+
! Update the line and character counts, but first be sure we aren't exceeding
! the maximum number of lines allowed
!-
IF (EDT$$CMP_LNO (CUR_BUF [TBCB_LINE_COUNT], MAX_LINES) GEQ 0)
THEN
BEGIN
EDT$$FMT_MSG (EDT$_MAXLINVAL);
RETURN (0);
END;
!+
! Fix up select range if necessary.
!-
CASE EDT$$SEL_RNGPOS () FROM -1 TO 1 OF
SET
[0] : ! Current line is select line
IF CH$PTR_GTR (.SEL_POS, .LN_PTR)
THEN
BEGIN
IF CH$PTR_LSS (CH$PTR (LN_BUF, 0, BYTE_SIZE), CH$PLUS (.SEL_POS, -.REC_LEN))
THEN
SEL_POS = CH$PTR (LN_BUF, 0, BYTE_SIZE)
ELSE
SEL_POS = CH$PLUS (.SEL_POS, -.REC_LEN);
ADDLINE (LNO0, SEL_LN, SEL_LN);
END;
[1] : ! Current line is before select line
ADDLINE (LNO0, SEL_LN, SEL_LN);
[-1] : ! Current line is after select line, or no select
BEGIN
0
END;
[OUTRANGE] :
ASSERT (8, 0);
TES;
!+
! If we are not going to rebuild the screen data base from the work file,
! tell the screen updater that we have inserted a line.
!-
IF ( NOT .SCR_REBUILD)
THEN
BEGIN
RECS_INSERTED = .RECS_INSERTED + 1;
IF (.RECS_INSERTED GTR (.SCR_LNS*2))
THEN
SCR_REBUILD = 1
ELSE
EDT$$SC_INSLN (.REC_ADDR, .REC_LEN);
END;
!+
! Update the various counters for this text buffer.
!-
ADDLINE (LNO0, CUR_BUF [TBCB_LINE_COUNT], CUR_BUF [TBCB_LINE_COUNT]);
CUR_BUF [TBCB_CHAR_COUNT] = .CUR_BUF [TBCB_CHAR_COUNT] + .REC_LEN;
ADDLINE (LNO0, CUR_BUF [TBCB_CUR_LIN], CUR_BUF [TBCB_CUR_LIN]);
WK_LN = .WK_BUK + .CUR_BUF [TBCB_LINE_ADDR];
!+
! Compute length of line to be inserted (in words), including line no. info.
!-
INS_LEN = ((.REC_LEN + BYTES_PER_WORD - 1) / BYTES_PER_WORD) + LIN_FIXED_SIZE + 1;
!+
! Will it fit in this bucket?
!-
IF ((.WK_BUK [WFB_END] + .INS_LEN) GTRU WF_BUKT_SIZE)
THEN
!+
! If we are at the beginning of a bucket and it is not the
! first bucket, then check out the previous bucket.
!-
IF ((.CUR_BUF [TBCB_LINE_ADDR] EQL WFB_FIXED_SIZE) AND !
(.WK_BUK [WFB_PREV_BUKT] NEQ 0))
THEN
BEGIN
!+
! Read the previous bucket and position to it's end.
!-
EDT$$WF_MAKECUR (.WK_BUK [WFB_PREV_BUKT]);
CUR_BUF [TBCB_LINE_ADDR] = .WK_BUK [WFB_END];
CUR_BUF [TBCB_CUR_BUKT] = .WK_CURBUK;
END;
!+
! If it still doesn't fit, then split the bucket. Note that
! the while loop is here because it may not fit after the first
! split. In this case the second split is guaranteed to create
! a new bucket and the line must fit.
!-
WHILE ((.WK_BUK [WFB_END] + .INS_LEN) GTRU WF_BUKT_SIZE) DO
BEGIN
IF ( NOT EDT$$WF_SPLTBUK ())
THEN
BEGIN
EDT$$FMT_MSG (EDT$_INSMEM);
RETURN (0);
END;
END;
!+
! Make a hole for the line to be inserted.
!-
WK_LN = .WK_BUK + .CUR_BUF [TBCB_LINE_ADDR];
EDT$$CPY_MEM (.WK_BUK [WFB_END] - .CUR_BUF [TBCB_LINE_ADDR], .WK_LN, .WK_LN + .INS_LEN);
!+
! Update the end of bucket field to reflect new size.
!-
WK_BUK [WFB_END] = .WK_BUK [WFB_END] + .INS_LEN;
!+
! And move the line into the bucket buffer.
!-
WK_LN [LIN_LENGTH] = .REC_LEN;
CH$FILL (0, .INS_LEN - (LIN_FIXED_SIZE + 1), CH$PTR (WK_LN [LIN_TEXT], 0, 36));
CH$MOVE (.REC_LEN, .REC_ADDR, CH$PTR (WK_LN [LIN_TEXT], 0, BYTE_SIZE));
!+
! Put offset to start of this line in next word & setup offset to next line
!-
.WK_LN + .INS_LEN - 1 = .INS_LEN;
WK_LN [LIN_NEXT] = .INS_LEN;
!+
! Update the record pointer
!-
CUR_BUF [TBCB_LINE_ADDR] = .CUR_BUF [TBCB_LINE_ADDR] + .INS_LEN;
!+
! Set the "modified" flag, and bump the count of inserted lines.
!
WK_MODFD = 1;
ADDLINE (WK_INSCNT, LNO0, WK_INSCNT);
!+
! Now make sure we are positioned correctly.
!-
IF (.CUR_BUF [TBCB_LINE_ADDR] GEQ .WK_BUK [WFB_END])
THEN
IF (.WK_BUK [WFB_NEXT_BUKT] NEQ 0)
THEN
BEGIN
EDT$$WF_MAKECUR (.WK_BUK [WFB_NEXT_BUKT]);
CUR_BUF [TBCB_LINE_ADDR] = WFB_FIXED_SIZE;
CUR_BUF [TBCB_CUR_BUKT] = .WK_CURBUK;
END;
WK_LN = .WK_BUK + .CUR_BUF [TBCB_LINE_ADDR];
RETURN (1)
END; ! of routine EDT$$INS_LN
END
ELUDOM