Trailing-Edge
-
PDP-10 Archives
-
BB-M836C-BM
-
tools/typvfu/typvfu.mac
There are 4 other files named typvfu.mac in the archive. Click here to see a list.
TITLE TYPVFU - Program to format DAVFU files
SEARCH GLXMAC,ORNMAC
PROLOG (TYPVFU)
TYPWHO==0
TYPVER==1
TYPMIN==0
TYPEDT==1
LOC 137
EXP <VRSN.(TYP)>
RELOC
COMMENT \
001 Leterrip !!!
\ ;End edit history
SUBTTL Symbols, macro's and impure storage
EXTERN PARSER
PARSET
DEFINE $FATAL(TXT),<
JRST [$TEXT(,<?TXT>)
JRST GETCMD ] >
VFULEN==^D144 ;Max DAVFU size
LPI%%6==354 ;6 Lines Per Inch
LPI%%8==355 ;8 Lines Per Inch
LPI%%0==356 ;Do not change LPI
VFUEOF==357 ;DAVFU end EOF byte
PAR%SZ==^D4 ;Parser block length
CMD%SZ==^D512 ;Command state block length
DATBLK:
PDL: BLOCK ^D100
VFU: BLOCK VFULEN+1 ;The VFU channel mask buffer
BUFFER: BLOCK VFULEN/2 ;The VFU I/O buffer
LPITYP: 0,,0 ;LPI type address
BYTPTR: 0,,0 ;$TEXT byte pointer
PARBLK: BLOCK PAR%SZ ;Parser argument block
CMDBLK: BLOCK CMD%SZ ;Command state block
IFN: 0,,0 ;File IFN
ENDBLK:
IB: $BUILD (IB.SZ) ;Build initialization block
$SET (IB.PRG,,'TYPVFU') ;Program name
$SET (IB.FLG,IT.OCT,1) ;Require command terminal
$EOB
FOB: 0,,0 ;FD Address
^D36 ;Byte size
SUBTTL Main program
TYPVFU: RESET ;Always do this
MOVE P,[IOWD ^D100,PDL] ;Setup the stack
SETZM DATBLK ;Clear first word of storage
MOVE S1,[DATBLK,,DATBLK+1] ;Get source,,destination
BLT S1,ENDBLK-1 ;Zero the data area (allocate pages)
MOVEI S1,IB.SZ
MOVEI S2,IB
$CALL I%INIT ;Get the library
SETZB S1,S2 ;Don't want timer interrupts for parser
$CALL P$INIT ;Initialize parser routines
MOVEI S1,INI010 ;Setup parser arg block
MOVEM S1,PAR.TB+PARBLK ;Store Table address
MOVEI S1,[ASCIZ/TYPVFU>/] ;Get prompt address
MOVEM S1,PAR.PM+PARBLK ;Store the prompt
MOVEI S1,CMDBLK ;Get the command state block address
MOVEM S1,PAR.CM+PARBLK ;Store address to return args
GETCMD: MOVE P,[IOWD ^D100,PDL] ;Reset stack
MOVEI S1,CMD%SZ ;Clear initial arguments
MOVEI S2,CMDBLK ;Get length in S1, address in S2
$CALL .ZCHNK ;Zap the block
MOVEI S1,COM.SZ-1
STORE S1,.MSTYP+CMDBLK,MS.CNT ;Set initial size
MOVEI S1,PAR%SZ ;Get size of parser block
MOVEI S2,PARBLK ;Point to it
$CALL PARSER ;Parse the command
JUMPT GETCM1 ;Onward if command parsed ok
CMDERR: MOVE S1,PRT.FL(S2) ;Get the flags
MOVE S2,PRT.EM(S2) ;Get the address of error text
TXNE S1,P.CEOF ;End of file on RESCAN?
MOVEI S2,[ASCIZ/Invalid command terminator/]
JRST ERROR ;Tell the user and try again
GETCM1: MOVEI S1,COM.SZ+CMDBLK ;Point to first argument
$CALL P$SETU ;Setup for second pass
$CALL P$KEYW ;Get keyword value
JUMPF [MOVEI S2,[ASCIZ/Internal command keyword table error/]
PJRST ERROR ] ;Tell the user and retry
$CALL 0(S1) ;Else call the processor
JRST GETCMD ;Get another command
SUBTTL ERROR - Routine to output an error message
ERROR: PUSH P,S2
ERRO1: $CALL K%TPOS ;Get terminal position
SKIPE S1 ;At column 0?
$TEXT ;No..make it so
POP P,S2
$TEXT (,?^T/0(S2)/) ;Display the error
JRST GETCMD ;Get another command
SUBTTL Initialization and Keyword dispatch tables
INI010: $INIT(KEY010) ;Parse initialization
KEY010: $KEYDSP(KEY020)
KEY020: $STAB
TOPS10< DSPTAB(EXIFDB,\"32,<CTZ>,CM%INV) >
DSPTAB(DMPFDB,DUMP,<DUMP>)
DSPTAB(EXIFDB,EXIT,<EXIT>)
$ETAB
EXIFDB: $NOISE (EXI010,<to monitor>)
EXI010: $CRLF
DMPFDB: $NOISE(DMP010,<VFU>)
DMP010: $IFILE(DMP020,<VFU filespec>)
DMP020: $CRLF
EXIT: PUSHJ P,I%EXIT
DUMP: PUSHJ P,P$IFIL ;Get a filespec
JUMPF EXIT ;Not there,,hmmmm
MOVEM S1,FOB ;Save the FD address
MOVEI S1,2 ;Get FOB length
MOVEI S2,FOB ; and its address
PUSHJ P,F%IOPN ;Open for input
JUMPF [$FATAL(<Open error: ^F/@FOB/ - ^E/[-1]/>) ]
MOVEM S1,IFN ;Save the file ID
PUSHJ P,F%IBUF ;Get the DAVFU from disk
PUSH P,S2 ;Save the buffer address
MOVE S1,IFN ;Get the file ID back
PUSHJ P,F%REL ;Close the file
MOVE S1,[POINT 8,BUFFER] ;Get the output buffer pointer
POP P,S2 ;Restore the buffer address
HRLI S2,(POINT 8,0) ;Get the input buffer pointer
MOVEI P1,VFULEN ;Get max lines DAVFU supports
LOOP: ILDB T1,S2 ;Get an input byte
ILDB T2,S2 ;And another
IDPB T2,S1 ;Swap the 2 bytes
IDPB T1,S1 ;to convert from -11 format
CAXE T1,VFUEOF ;At EOF yet ???
CAXN T2,VFUEOF ;Here too ???
JRST DECODE ;Yes,,continue
SOJGE P1,LOOP ;No,,count down total bufr length
$FATAL (<DAVFU larger then internal buffer size>)
DECODE: MOVE S1,[POINT 8,BUFFER] ;Get the input buffer pointer
ILDB T1,S1 ;Get the start byte (LPI)
SUBI T1,LPI%%6 ;Recode the LPI value
SKIPL T1 ;First byte must be 354, 355, or 356
CAILE T1,2 ;Is this really a DAVFU ???
$FATAL (<Invalid start byte found in DAVFU>)
MOVEI T1,[ASCIZ/6/
ASCIZ/8/
ASCIZ/Hardware Switched/](T1) ;Get ASCII LPI value
MOVEM T1,LPITYP ;Save the LPI type text address
SETZM P1 ;Clear line counter
DECO.1: ILDB T1,S1 ;Get a line byte
ILDB T2,S1 ;Get the next byte
CAXN T1,VFUEOF ;End of data ???
JRST DECO.2 ;Yes,,leave
LSH T2,6 ;Shift it over 6 bits
ADD T2,T1 ;Get 12 bits total
MOVEM T2,VFU(P1) ;Save the channel mask for this line
AOS P1 ;Account for this line
JRST DECO.1 ;Loop for all bytes
DECO.2: $TEXT (,<DAVFU Format Program^M^J^JLines per/inch = ^T/@LPITYP/^M^JPhysical page size = ^D/P1/ lines^M^J>)
MOVSI T2,400000 ;Init channel mask to right place
SETZM T3 ;Clear channel loop counter
DECO.3: AOS T3 ;Bump channel counter
CAILE T3,^D12 ;Only want 12 channels
JRST GETCMD ;Done,,go get another command
SETOB P3,P4 ;Reset low:high line counters
SETOM T1 ;Reset line loop counter
ROT T2,1 ;Shift channel mask to correct place
MOVE S1,[POINT 7,BUFFER] ;Get $TEXT byte pointer
MOVEM S1,BYTPTR ;Save it for later
SETZM BUFFER ;Clear the first word
DECO.4: AOS T1 ;Bump line counter
CAILE T1,0(P1) ;Line number in range ???
JRST DECO.6 ;No,,dump channel data
TDNN T2,VFU(T1) ;Stopping on this line for this chanel ?
JRST DECO.4 ;No,,check next line
SKIPGE P3 ;Any start line value yet ???
JRST DECO.5 ;No,,initialize line counters
CAIN T1,1(P4) ;Line + 1 ???
JRST [MOVEM T1,P4 ;Yes,,then this is the new end line
JRST DECO.4 ] ;Check next line
PUSHJ P,DUMPIT ;Dump the start:end lines
DECO.5: MOVEM T1,P3 ;Current line is now first line
MOVEM T1,P4 ; and last line
JRST DECO.4 ;Check next line
DECO.6: JUMPL P3,DECO.3 ;No lines,,check next channel
PUSHJ P,DUMPIT ;Dump the start end lines
SETZM S1 ;Get a null
PUSHJ P,OUTBYT ;Make it ASCIZ
$TEXT (,<Channel # ^D2/T3/ stops on lines^T/BUFFER/^M^J>)
JRST DECO.3 ;Process next channel
DUMPIT: AOS P3 ;Convert from offset to line number
AOS P4 ;Convert from offset to line number
CAMN P3,P4 ;Start and end lines the same ???
$TEXT (OUTBYT,< ^D/P3/^A>) ;Yes,,dump just one line
CAME P3,P4 ;Start and end lines different ???
$TEXT (OUTBYT,< ^D/P3/:^D/P4/^A>) ;Yes,,dump the lines
$RETT ;Return
OUTBYT: IDPB S1,BYTPTR ;Save the byte
$RETT ;Return
END TYPVFU