Trailing-Edge
-
PDP-10 Archives
-
BB-M836A-BM
-
tools/sed/sedeco.mac
There are 9 other files named sedeco.mac in the archive. Click here to see a list.
TITLE SEDECO - ECHO PROGRAM TO HELP SED IMPLEMENTORS
SUBTTL A CHRISTOPHER HALL FECIT
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1981 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
;THIS PROGRAM IS USED TO FIND OUT WHAT CHARACTERS ARE SEND FROM A
;TERMINAL WHEN KEYS ARE PRESSED.
;IF CONV==0 CHARACTERS ARE ECHOED BACK TO THE TERMINAL EXACTLY AS THEY
; COME (CONTROL-A BEGETS CONTROL-A, NOT "^A")
;IF CONV==1 THE CODES FOR THE CHARACTERS ARE ECHOED
; (CONTROL-A BEGETS "CONTROL-A (001)"
TOPS10==0
CONV== 1
;TWO SPECIAL CASES: CONTROL-C CAUSES EXIT FROM PROGRAM
; CONTROL-M OUTPUTS A <CRLF> IN ADDITION TO EVERYTHING ELSE
SEARCH UUOSYM
IFE TOPS10,<
SEARCH MONSYM
>
T1=1
T2=2
T3=3
T4=4
IFN TOPS10,<
START: RESET
SETO T1,
TRMNO. T1,
HALT
MOVEM T1,BRKADR+1
MOVEM T1,TSTIN+1
MOVEM T1,IN+1
OPEN 1,INADR
HALT
OPEN 2,OUTADR
HALT
MOVE T3,[XWD 3,BRKADR]
TRMOP. T3, ;SET UP PIM BREAK SET (ALL CHARS)
HALT
IO: MOVE T1,[XWD 2,IN] ;YES - READ A CHARACTER
TRMOP. T1,
HALT
ANDI T1,177 ;KEEP ONLY 7 BITS
CAIN T1,3 ;GOT A CONTROL-C?
JRST CTLC ;YES - DONE
MOVE T2,T1 ;ELSE GET CHARACTER
MOVE T3,T1 ;HERE, TOO
IFN CONV,<
CAIL T1,40 ;SPECIAL CHARACTER?
JRST SKIP ;NO - SKIP THIS
OUTSTR [ASCIZ / CTRL-/]
ADDI T2,100
SKIP:
>
OUTCHR T2 ;ELSE OUTPUT THE CHARACTER
IFN CONV,<
OUTCHR ["("]
ROT T1,-6 ;GET HIGH DIGIT
ADDI T1,"0" ;CONVERT TO ASCII
OUTCHR T1
ROT T1,3 ;GET LOW DIGIT
TRZ T1,777770 ;KEEP ONLY THE RIGHT BITS
ADDI T1,"0" ;CONVERT TO ASCII
OUTCHR T1
ROT T1,3 ;GET LOW DIGIT
TRZ T1,777770 ;KEEP ONLY THE RIGHT BITS
ADDI T1,"0" ;CONVERT TO ASCII
OUTCHR T1
OUTCHR [")"] ;OUTPUT IT
SKIP1:
>
CAIE T3,15 ;GET A <CR>?
JRST IO ;NO - LOOP
OUTCHR T3 ;YES - GIVE WITH A <CRLF>
OUTCHR [12]
JRST IO ;THEN LOOP
CTLC: RELEAS 1,
RELEAS 2,
EXIT 1,
JRST IO
;TOPS10 DATA
INADR: XWD .IOPIM
SIXBIT /TTY/
0,,INHDR
INHDR: BLOCK 3
OUTADR: XWD .IOPIM
SIXBIT/TTY/
OUHDR,,0
OUHDR: BLOCK 3
BRKADR: 2037
0
0
TSTIN: 1
0
IN: 20
0
>
IFE TOPS10,<
START: MOVEI T1,-1 ;MAKE LKJHKJ GIVE THEIR CODE
MOVE T2,[525252,,525252]
MOVE T3,T2
SFCOC
MOVEI T1,.PRIIN ;READ MODE WORD
RFMOD
MOVEM T2,FMDSAV ;SAVE IT FOR EXIT
TDZ T2,[37777,,4022] ;ZERO PAGE LENGTH, WIDTH; MAKE NOTHING ECHO
TDO T2,[200000,,300] ;TURN ON FORMF, NO-TRANS-OUTP BITS
SFMOD
STPAR
MOVEI T1,-5 ;DISABLE INTERRUPTS ON ALL CHARACTERS
SETZ T2, ; SO MONITOR WON'T TRAP ANYTHING
STIW
IO: PBIN ;READ A CHARACTER
CAIN T1,T3 ;GOT A CONTROL-C?
JRST CTLC ;YES - DONE
MOVE T2,T1 ;ELSE GET CHARACTER
MOVE T3,T1 ;HERE, TOO
IFN CONV,<
CAIL T1,40 ;SPECIAL CHARACTER?
JRST SKIP ;NO - SKIP THIS
MOVEI T1,[ASCIZ / CTRL-/]
PSOUT
MOVEI T1,100(T2)
SKIP:
>
PBOUT ;ELSE OUTPUT THE CHARACTER IN T1
IFN CONV,<
MOVEI T1,"("
PBOUT
MOVE T1,T2
ROT T1,-6 ;GET HIGH DIGIT
ADDI T1,"0" ;CONVERT TO ASCII
PBOUT
ROT T1,3 ;GET LOW DIGIT
TRZ T1,777770 ;KEEP ONLY THE RIGHT BITS
ADDI T1,"0" ;CONVERT TO ASCII
PBOUT
ROT T1,3 ;GET LOW DIGIT
TRZ T1,777770 ;KEEP ONLY THE RIGHT BITS
ADDI T1,"0" ;CONVERT TO ASCII
PBOUT
MOVEI T1,")" ;OUTPUT IT
PBOUT
SKIP1:
>
CAIE T3,15 ;GET A <CR>?
JRST IO ;NO - LOOP
MOVE T1,T3 ;YES - GIVE WITH A <CRLF>
PBOUT
MOVEI T1,12
PBOUT
JRST IO ;THEN LOOP
CTLC: MOVEI T1,.PRIIN
MOVE T2,FMDSAV ;GET BACK THE ORIGINAL FMOD WORD
SFMOD
STPAR
HALTF
JRST IO
;TOPS20 DATA
FMDSAV: BLOCK 1 ;SAVED RFMOD WORD
>
END START