Trailing-Edge
-
PDP-10 Archives
-
BB-M780B-SM
-
monitor-sources/impanx.mac
There are 16 other files named impanx.mac in the archive. Click here to see a list.
; UPD ID= 543, SNARK:<5.MONITOR>IMPANX.MAC.10, 16-Mar-82 20:11:51 by PAETZOLD
;TCO 5.1755 - Send three NOPs in IMIERR
; UPD ID= 109, SNARK:<5.MONITOR>IMPANX.MAC.9, 20-Aug-81 15:19:56 by ZIMA
;TCO 5.1458 - Change title for Autopatch consistency.
; UPD ID= 77, SNARK:<5.MONITOR>IMPANX.MAC.8, 27-Jul-81 09:06:11 by PAETZOLD
;UPDATE COPYRIGHT INFORMATION
; UPD ID= 72, SNARK:<5.MONITOR>IMPANX.MAC.7, 24-Jul-81 05:21:13 by PAETZOLD
; UPD ID= 70, SNARK:<5.MONITOR>IMPANX.MAC.6, 23-Jul-81 16:03:10 by PAETZOLD
;TCO 5.1380 - Add IMPFPF routine to determine if AN10 caused IOPGF
; UPD ID= 2032, SNARK:<5.MONITOR>IMPANX.MAC.5, 19-May-81 13:15:02 by PAETZOLD
;FIX TYPO IN LAST EDIT IN IMIERR
; UPD ID= 1991, SNARK:<5.MONITOR>IMPANX.MAC.4, 14-May-81 11:23:27 by PAETZOLD
;TCO 5.1321 MAKE ARPANET WORK IN RELEASE 5
;CHANGE ORDER OF FILE NAMES IN SEARCH PSEUDO OP
;DONT CYCLE NET IN IMIERR IF DEBUGGING
; UPD ID= 720, SNARK:<5.MONITOR>IMPANX.MAC.3, 1-Jul-80 15:21:22 by LYONS
; UPD ID= 719, SNARK:<5.MONITOR>IMPANX.MAC.2, 1-Jul-80 15:12:37 by LYONS
; TCO 5.1088 IMPNII, ILLUUO do to trashed stack in IMIN3
; also, if IMIERR is called, punt the network, and reset all connections
;<4.1.MONITOR>IMPANX.MAC.19, 3-Jan-80 08:39:19, EDIT BY R.ACE
;CHANGE BBN TO DEC IN COPYRIGHT NOTICE
;<4.MONITOR>IMPANX.MAC.18, 11-Oct-79 14:40:29, Edit by LCAMPBELL
; Document BUGHLTs
;<OSMAN.MON>IMPANX.MAC.1, 10-Sep-79 15:33:19, EDIT BY OSMAN
;TCO 4.2412 - Move definition of BUGHLTs, BUGCHKs, and BUGINFs to BUGS.MAC
;<4.MONITOR>IMPANX.MAC.16, 20-Apr-79 14:58:31, Edit by LCAMPBELL
; Merge in BBN changes
;<4.MONITOR>IMPANX.MAC.15, 18-Apr-79 12:40:40, Edit by LCAMPBELL
; Clear IMPOB also after sending irregular messages
;<4.MONITOR>IMPANX.MAC.14, 13-Apr-79 15:14:40, Edit by LCAMPBELL
; When done with an output buffer, clear IMPOB to prevent IMPAFB
;<4.MONITOR>IMPANX.MAC.13, 26-Jan-79 09:48:22, Edit by LCAMPBELL
;<4.MONITOR>IMPANX.MAC.12, 9-Jan-79 13:53:33, Edit by LCAMPBELL
; Update copyright notice
;<4.MONITOR>IMPANX.MAC.11, 5-Jan-79 11:12:55, Edit by LCAMPBELL
; Change IMPRST to IMPINI, it's more mnemonic
;<4.MONITOR>IMPANX.MAC.10, 3-Jan-79 13:02:55, Edit by LCAMPBELL
; Add definition of STY%NP removed from IMPPAR
;<4.MONITOR>IMPANX.MAC.8, 29-Sep-78 13:58:13, Edit by LCAMPBELL
; Add dummy entry point IMPRST (is non-dummy for IMP11B)
;<4.MONITOR>IMPANX.MAC.2, 3-Sep-78 23:26:29, EDIT BY JBORCHEK
;<3A-JBORCHEK>IMPANX.MAC.3, 24-Aug-78 20:17:44, EDIT BY JBORCHEK
;<4.MONITOR>IMPANX.MAC.4, 22-Aug-78 14:15:32, EDIT BY JBORCHEK
;CONDITIONALIZE BBN CODE
;<BBN-3-MONITOR>IMPANX.MAC.1, 4-Aug-78 14:54:48, EDIT BY CLEMENTS
; Against my better judgment, introduce conditional on TCP assembly.
;<3-CLEMENTS>IMPANX.MAC.8, 15-Jun-78 14:25:51, EDIT BY CLEMENTS
; Note: Internet stuff has been disabled at INETIN until TCP and
; its buffers get converted to rel 3.
;<3-CLEMENTS>IMPANX.MAC.2, 8-Jun-78 17:21:55, EDIT BY CLEMENTS
;<3-CLEMENTS>IMPANX.MAC.1, 8-Jun-78 17:07:00, EDIT BY CLEMENTS
; Start converting for release 3, extended addressing. Including
; long leaders, and DEC additions.
;COPYRIGHT (C) 1978,1979,1980,1981 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
TCPF==0 ;*** TEMPORARILY, INTRODUCE AN ASS'Y SWITCH, TURNING OFF TCP
BBNF==0 ;*** BBN ONLY CODE ***
SEARCH IMPPAR,PROLOG
SEARCH MACSYM,MONSYM
TTITLE (IMPANX,IMPANX,< - IMP DRIVER FOR AN10 - R CLEMENTS>)
; HARDWARE DEFINITIONS FOR AN10 DEVICE INTERFACE
ANI=520 ;I/O DEVICE NUMBER FOR INPUT SIDE
ANO=524 ;I/O DEVICE NUMBER FOR OUTPUT SIDE
;BITS IN CONI FOR ANI
ANIMRQ==1B27 ;MSG REQUEST. IMP STARTING TO SEND TO HOST.
ANIBSY==1B26 ;BUSY. HOST IS ACCEPTING A MESSAGE
ANIM36==1B25 ;MESSAGE BEING ASSEMBLED INTO 36 BIT WDS IF 1,
; 32 BIT WORDS IF 0.
ANIWCO==1B24 ;WD COUNT OVERFLOW. MESSAGE PORTION IS DONE.
ANIDON==1B23 ;DONE. IMP SENT LAST BIT.
ANIIID==1B19 ;IMP IS DOWN. (READY LINE OFF)
ANIIWD==1B18 ;IMP WAS DOWN. (READY LINE HAS BEEN OFF)
;BITS IN CONO FOR ANI
ANIRST==1B19 ;RESET THE WHOLE AN10 (EXCEPT HOST READY LINE)
ANICLE==1B18 ;CLEAR ERROR FLAGS IN LH OF CONI, CLR IMP WAS DOWN.
ANXCHS==6B32+6B35;TWO ADJACENT PI CHANNELS IN B30-35
;BITS IN CONI FOR ANO
ANOEND==1B27 ;END OF MSG. SEND "LAST" WHEN WD CNT RUNS OUT.
ANOBSY==1B26 ;BUSY. SEND WORDS TO THE IMP.
ANOM36==1B25 ;MODE 36. SEND ALL 36 BITS OF DATA WORDS. ELSE,
; JUST SEND LEFT-HAND 32 BITS.
ANOWCO==1B24 ;WORD COUNT OVERFLOW. THIS MSG PORTION COMPLETED.
ANODON==1B23 ;ALL BITS INCLUDING "LAST" HAVE BEEN SENT.
ANOIID==1B19 ;IMP IS DOWN, SAME AS IN ANI
ANOIWD==1B18 ;IMP WAS DOWN, SAME AS IN ANI
;BITS IN CONO FOR ANO
ANOCLE==1B18 ;CLEAR ERROR BITS, IMP WAS DOWN BIT.
;REGISTER SELECT FIELD, IN BOTH ANO AND ANI CONO'S
; NOTE THESE AREN'T USED MUCH BECAUSE HARDWARE SWITCHES TO
; THE "RIGHT" REGISTER MOST OF THE TIME BY ITSELF.
ANXVAR==2B29 ;VECTOR INTERRUPT ADDRESS REGISTER
ANXWAR==1B29 ;WORD COUNT AND ADDRESS REGISTER
ANXDR==0B29 ;DATA REGISTER.
; BITS IN INPUT DEVICE VECTOR ADDRESS REGISTER
ANIHRL==1B10 ;HOST READY LINE. DATAO A 1 TO BECOME READY.
;MISCELLANEOUS VARIABLES
PIMSTK::IOWD NIMSTK,IMSTK ;IMP INTERRUPT STACK POINTER
DEFSTR IMWDCT,,12,12 ;WORD COUNT FOR WC/ADR REGISTER
DEFSTR IMBFAD,,35,23 ;ADDRESS FOR WC/ADR REGISTER
;INTERRUPT LOCATION
ANOVIL: XPCW ANOVI1 ;OUTPUT INTERRUPT LOCATION
ANIVIL: XPCW ANIVI1 ;INPUT INTERRUPT LOCATION
;Device-dependent data for leaders
STY%NP==5 ;Number of Padding words, for H2I NOP
;CLOCK LEVEL CHECK ROUTINE
IMPCHK::MOVEI T2,^D1000
MOVEM T2,IMPTM2 ; Call this every second
SKIPN IMPRDY ; Net on?
JRST IMPCKX ; NO.
CALL IMPRLQ ; IS IMP DOWN NOW OR RECENTLY?
SKIPL IMPRDT ; And not already noticed?
JRST IMPCKX ; NO. NO NEED TO SET ERROR FLAGS
CALL IMIERR ; Be sure it's noticed
AOS IMPFLG ; cause running of ncp fork
IMPCKX:
IFN BBNF,<
CALL IM2CHK ; Check second interface, if any
>
RET
; Start input
; called from process level when buffers made available and input is off
; and from endin processor if more buffers are available
IMISRT::CALL IMPRLQ ; IS DEVICE UP AND IMP READY?
RET ; No, do nothing
SOSL IMPNFI
SKIPN T1,IMPFRI
BUG(IMPNII)
LOAD T2,NBQUE,(T1) ; Get next free buffer
SKIPE T2 ; If there's a successor,
HRLI T2,ANBSEC ; Set section number
MOVEM T2,IMPFRI
SETZRO NBQUE,(T1) ; DeQueue it from any others
MOVEM T1,IMIB
IFN TCPF,<
HRRZS TNBFFL ; Remember IMIB is an NCP buffer
>
HRRI T1,.NBLD0(T1) ; FIRST WORD TO READ INTO
TLO T1,(<.NBLD2+1>B12) ; Read thru leader and some padding
MOVEM T1,IMPINP ; THIS IS THE FIRST DATAO TO ANXWAR
MOVE T1,[MSEC1,,IMIN0] ; SET STATE TO "WAITING FOR IMP TO GO"
MOVEM T1,IMIDSP
SETZM IMPIOV ; AND CLEAR "INPUT OVERFLOW" FLAG
CONSZ ANI,ANIIWD ; HAS IMP BEEN DOWN?
CALL IMIERR ; YES, Be sure it gets noticed
CONO ANI,ANICLE+ANXWAR+ANXCHS ;TELL IMP WE ARE READY TO GO.
RET ; IT WILL INTERRUPT ON FIRST BIT TO US
; Pi service for input
; No AC's have been saved!
; Dispatched via IMIDSP to various routines.
; IF ANIDON IS ON, THEY GO TO IMPEIN FOR END OF INPUT HANDLING.
;For subsequent interrupts, a field will steer the packing and counts.
;Values are named .IIxxx for Imp Interrupt dispatch. Store in IMITYP
; for input and similarly in IMOTYP for output.
.IINC6==0 ;This is a 36 bit NCP message
.IINC2==1 ;This is a 32 bit NCP message
.IITNT==2 ;Telenet link
.IISPQ==3 ;Special queue
.IIINT==4 ;Internet packing
.IIMLC==5 ;MLC (Ptip) format
.IISQ2==6 ;False start on Internet -- Handle as spec. Q.
; Here when input has been idle and IMP starts to send bits.
; This first interrupt requires us to send over word count and
; address. The first count will read the IMP-to-host leader and
; a word of padding, in 36 bit mode.
IMIN0: CONSO ANI,ANIMRQ ;MESSAGE REQUEST IS ONLY VALID BIT
JRST IMIN0X ;IT WASN'T THAT. SOMETHING WIERD.
MOVEM T1,IMIDSP ;SAVE AC T1, PREPARE TO SET DISPATCH.
MOVE T1,[MSEC1,,IMIN1] ;NEXT INTERRUPT WANTED IS THIS
EXCH T1,IMIDSP ;SET DISPATCH FOR READING I-H LEADER.
DATAO ANI,IMPINP ;TELL IT BUFFER ADDRESS AND COUNT.
CONO ANI,ANIM36+ANIBSY+ANXCHS ;SET TO READ 36 BITS, THEN PI.
XJEN ANIVI1 ;DISMISS INPUT INTERRUPT.
;IMIN0X - Input interrupt error routine. If the input side of the
; ANX has been idle, any interrupt other than MSG REQUEST is an error.
IMIN0X: MOVEM T1,IMIDSP ;SAVE T1
CONI ANI,T1 ;GET STATUS, FOR BUGINF TO SEE
CONO ANI,0 ;TURN OFF INPUT.
BUG (IMINX1,<<T1,CONIAN>>)
MOVE T1,[MSEC1,,IMIN0X] ;SET DISPATCH ADDRESS
EXCH T1,IMIDSP ;AND RESTORE T1
CONO ANI,ANIRST ;RESET ANI, LEAVE ANIIWD ON, IMPUT OFF
XJEN ANIVI1 ;AND LET CLOCK/NCPFRK FIX IT.
; Here at PI level after IMP leader and a word of padding
; have been read. ANIDON on means it wasn't that long.
; If not end of message, decide whether to read some more
; in 32 or 36 bit mode, based on link and host numbers so far.
; For NCP, will still have to read H-H leader and then decide again.
IMIN1: CONSZ ANI,ANIDON ;END OF MESSAGE YET?
JRST IMPEIN ;Yes, go process short (irreg) msg
DMOVEM T1,IMPIAC+T1 ;Save standard interrupt level AC's
DMOVEM T3,IMPIAC+T3 ; ..
DMOVEM CX,IMPICX ; ..
MOVE P,PIMSTK ; And set up a local PI level stack
MOVE T1,IMIB ;Point to the input buffer
LOAD T2,IHLNK,(T1) ;Get the link and host numbers
LOAD T3,IHHST,(T1) ; ..
IFN BBNF,<
MOVEI T4,0(T2) ;Shift for MLC field
LSH T4,-1 ; ..
CAMN T4,MLCHLF ;Right link for MLC?
JRST IMI1ML ;Yes
CAIN T2,TNTLNK ;Is it the TELENET link?
JRST IMI1TN ;Yes, pack it differently
CAIN T2,INTLNK ;Internet Link?
JRST IMI1IN ;Yes. Mark that in IMIDSP.
>
CAIG T2,LLINK ;Check for NCP or not
CAIL T3,FKHOST ; ..
JRST IMI1SQ ;Not NCP. Treat special queues.
IMI1NC: MOVX T4,.IINC6 ;Will want NCP handling
IMIN1A: MOVEI T2,.NBLD2+2(T1) ;Where next word in goes.
HLL T2,II1WCT(T4) ;Word count
TLO T2,ANBSEC ;In right addr space
MOVEM T2,IMPINP ;Command for device
DATAO ANI,IMPINP ;Load WC and address
CONO ANI,@II1CNO(T4) ;Make it go
MOVE T3,[MSEC1,,IMIN2] ;Address for next interrupt
MOVEM T3,IMIDSP ;Save for next interrupt
MOVEM T4,IMITYP ;Save dispatch code
JRST IMPUB1 ;Done with this int'pt.
IMI1SQ: MOVX T4,.IISPQ ;Special queues
JRST IMIN1A ;Join common code
IFN BBNF,<
IMI1ML: MOVX T4,.IIMLC ;MLC link
JRST IMIN1A ;Join common code
IMI1IN: MOVX T4,.IIINT ;Internet code
JRST IMIN1A ;Join common code
IMI1TN: MOVX T4,.IITNT ;Telenet handling code
JRST IMIN1A ;And join NCP flavor routine
>
II1WCT: EXP 2B12 ;TYPE NCP36
EXP 2B12 ;TYPE NCP32
EXP 2B12 ;TYPE TELENET
EXP 1B12 ;TYPE SPECIAL Q
EXP 4B12 ;TYPE Internet
EXP 2B12 ;TYPE MLC
EXP 2B12 ;should not be referenced here
II1CNO: EXP ANIM36+ANIBSY+ANXCHS ;TYPE NCP36
EXP ANIM36+ANIBSY+ANXCHS ;TYPE NCP32
EXP ANIM36+ANIBSY+ANXCHS ;TYPE TELENET
EXP ANIBSY+ANXCHS ;TYPE SPECIAL Q
EXP ANIBSY+ANXCHS ;TYPE Internet
EXP ANIM36+ANIBSY+ANXCHS ;TYPE MLC
EXP ANIM36+ANIBSY+ANXCHS ;should not be referenced here
IMIN2: CONSZ ANI,ANIDON ;End of message yet?
JRST IMPEIN ;Yes. Go process short message
DMOVEM T1,IMPIAC+T1 ;Save standard interrupt level AC's
DMOVEM T3,IMPIAC+T3 ; (Since here by vectored interrupt)
DMOVEM CX,IMPICX ; ..
MOVE P,PIMSTK ; And set up a local PI level stack
MOVE T1,IMIB ;Point to the input buffer
MOVE T4,IMITYP ;Get type code for this message
;Padding removal isn't needed if haven't read that much, but it's
; cheaper to always remove it than to test for needing to.
MOVE T2,.NBLD2+2(T1) ;Crunch out the padding on input
STOR T2,IHPD1,(T1) ;Move this partial word
MOVE T2,.NBHHL+2(T1) ;And this full one
MOVEM T2,.NBHHL(T1) ; ..
IFN BBNF,<
CAIN T4,.IIINT ;Inputting possible Internet msg?
CALL INETIN ;Check further. May change T4,T1.
>
LOAD T2,NBBSZ,(T1) ;Get its size
MOVE T3,II2LDT(T4) ;Amount we have used so far
SUBI T2,(T3) ; ..
ASH T2,^D23 ;Position for AN10 word counter
HRR T2,T1 ;Address of the buffer
ADDI T2,(T3) ;Word in buffer that we want to write
TLO T2,ANBSEC ;In the right section
MOVEM T2,IMPINP ;Feed this to the hardware
DATAO ANI,IMPINP ;Tell it.
CAIE T4,.IINC6 ;NCP links?
JRST IMIN2A ;No.
LOAD T2,HHSIZ,(T1) ;Yes, see if 32 bit or 36.
CAIN T2,^D36 ;Check connection byte size
JRST IMIN2A ;36 bit connection
MOVEI T4,.IINC2 ;Change type to 32 bit NCP
MOVEM T4,IMITYP ;Remember dispatch type in core
IMIN2A: CONO ANI,@II2CNO(T4) ;Make it go
MOVE T1,[MSEC1,,IMIN3] ;SET DISPATCH FOR NEXT INTERRUPT
MOVEM T1,IMIDSP ; ..
JRST IMPUB1 ;Restore AC's and dismiss interrupt
;Table of CONO values to read data portion of message, by msg type
II2CNO: EXP ANIM36+ANIBSY+ANXCHS ;TYPE NCP36
EXP ANIBSY+ANXCHS ;TYPE NCP32
EXP ANIM36+ANIBSY+ANXCHS ;TYPE TELENET
EXP ANIBSY+ANXCHS ;TYPE SPECIAL Q
EXP ANIBSY+ANXCHS ;TYPE Internet
EXP ANIM36+ANIBSY+ANXCHS ;TYPE MLC
EXP ANIBSY+ANXCHS ;TYPE SPECIAL Q - false internet
;Table of next word to read into at IMIN2 time, by message type
II2LDT: EXP .NBDW0 ;Type NCP36
EXP .NBDW0 ;Type NCP32
EXP .NBDW0 ;Type TELENET
EXP .NBHHL ;Type SPECIAL QUEUES
EXP .NBDW0+2 ;Type Internet
EXP .NBDW0 ;Type MLC
EXP .NBHHL+3 ;Type Special Q - false Internet
;NOTE: This code is disabled for the time being.
; Called from IMIN2 when possible Internet message is coming in.
; This routine does the following:
; 1. Move the 2 remaining H-H words to the right place
; 2. Check for right message type and subtype
; 3. Check for right Internet message type
; (Currently just TCP format is handled)
; 4. Check for TCP being on -- TCP fork runs the gateway
; 5. Check for a TCP-supplied buffer being available
; If any of those conditions is lacking, input is resumed and the
; message is handled as a normal special queue message.
; If the message is really destined for the gateway (TCP, XNET, ...),
; it gets copied into a TCP-supplied buffer and input resumes.
; IMPEIN will then queue it for the gateway.
;T1/ Pointer to current NCP-supplied buffer
; CALL INETIN
;Ret+1: Always. T4 set to .IIINT if I.N. msg to be completed, or .IISQ2
; if it will be given to a special Q
IFN BBNF,<
INETIN: DMOVE T2,.NBDW0+2(T1) ; Pick up the Internet header
DMOVEM T2,.NBDW0(T1) ; Stash in proper place
IFN TCPF,< ;Until TCP done for rel 3
LOAD T2,IHFTY,(T1) ; ARPANET message format
LOAD T3,IHMTY,(T1) ; ARPANET message type
CAIN T3,.IHREG ; Regular msg?
CAIE T2,ITY%LL ; Long leader?
> ; End TCP code
JRST INETIC ; No. Let normal code handle it.
IFN TCPF,< ;Until TCP done for rel 3
LOAD T2,IHSTY,(T1) ; ARPANET subtype
CAIE T2,STY%FC ; Normal, flow-controlled?
CAIN T2,STY%UC ; or uncontrolled?
SKIPN TCPON ; And TCP is on? (It runs the gateway)
JRST INETIC ; No. Let normal code handle this.
LOAD T2,INETF,(T1) ; Get Internet Format and Version
CAIN T2,<.TCPFM_4>+.TCPVR ; OK for TCP (**** Current Limitation)
SKIPG TCPNFI ; And there is a TCP buffer around?
JRST INETIC ; No. Let normal special queue have it.
; All is OK for the switch to a TCP buffer. Do it, return the NCP buf.
SOSL TCPNFI ; Count down number of free TCP bufs
SKIPN T2,TCPFRI ; Get pointer to buffer to use
BUG(IMPNIT)
HRLI T3,.NBLD0(T1) ; "From" pointer for BLT
HRRI T3,.NBLD0(T2) ; "To" -- into TCP buffer
HLRZ T4,II1WCT+.IIINT ; Get size of second transfer
ADDI T4,.NBHHL-2(T2) ; Compute last addr (-2 for fill crunch)
;;; Figure out where these buffers will live, and call XBLTA here.
BLT T3,0(T4) ; Copy ARPANET and Internet headers
HLRZ T1,0(T2) ; Next TCP free buffer
EXCH T1,TCPFRI ; Becomes head of list
EXCH T1,IMIB ; Old head is now current input bfr
EXCH T1,IMPFRI ; Old input bfr goes to NCP free list
HRLM T1,@IMPFRI ; Old list is off of new head
AOS IMPNFI ; There is now another free input bfr
HRROS TNBFFL ; The current one is owned by TCP
MOVEI T1,0(T2) ; Now think in terms of TCP's buffer
MOVEI T4,.IIINT ; Return this to caller
RET
> ; End TCP code
; Here when current input is to be continued. Fix to be spec. q. input.
INETIC: MOVEI T2,.IISPQ ; Mark for special Queue dispatch
MOVEM T2,IMITYP ; On next interrupt
MOVEI T4,.IISQ2 ; Return this to caller
RET
>
;HERE ON INTERRUPT LEVEL FOR BODY OF MESSAGE FROM IMP.
IMIN3: CONSZ ANI,ANIDON ;I HOPE IT FIT IN THE BUFFER.
JRST IMPEIN ;GOOD. IT DID.
AOS IMPIOV ;IT DIDN'T. FLAG THAT IT'S TOO LONG.
DATAO ANI,[1B12+IMSTK+NIMSTK-1] ;Use stack as bit bucket
CONO ANI,ANIBSY+ANXCHS ;KEEP READING UNTIL END COMES ALONG.
XJEN ANIVI1 ;WAIT FOR NEXT INTERRUPT. END, PLEASE?
; Here when end msg recd from imp
IMPEIN: DMOVEM T1,IMPIAC+T1 ;Save standard interrupt level AC's
DMOVEM T3,IMPIAC+T3 ; ..
DMOVEM CX,IMPICX ; ..
MOVE P,PIMSTK ; And set up a local PI level stack
CONSZ ANI,ANIIWD!ANIIID ; IMP IS OR WAS DOWN?
CALL IMIERR ; Take care of it
CONO ANI,ANXWAR ; SELECT WC/ADDR REGISTER, CLEAR PIA
DATAI ANI,IMPINP ; READ CURRENT ADDRESS
SKIPG T1,IMIB ; Bfr address
JRST IMPEI2 ; Wasn't one
AOSLE IMPFLS ; Flushing msgs?
SKIPE IMPIOV ; OR GOT AN OVERFLOW?
JRST IMPEI3 ; Yes, return to free list
HRRZ T2,IMPINP ; How much was read?
CAIGE T2,.NBLD2(T1) ; A full leader?
JRST IMPEI3 ; No, Discard it as useless
LOAD T3,IHFTY,(T1) ; Is this a long leader msg?
CAIE T3,ITY%LL ; ..
JRST IMPEI3 ; No. Just throw it away.
LOAD T3,IHMTY,(T1) ; Yes. Get message type.
CAIE T3,.IHIGD ; One of the ones that has no msg ID?
CAIN T3,.IHDHS ; ..
JRST IMPEI4 ; Yes. Give it to NCP
CAIN T3,.IHNOP ; You also can't believe link on NOPs
JRST IMPEI4 ; Give them to NCP anyhow
LOAD T2,IHHST,(T1) ; See whether it's an NCP irreg msg
LOAD T4,IHLNK,(T1) ; Get host and link
CAIGE T2,FKHOST ; From IMP fake hosts?
CAILE T4,LLINK ; Or non-NCP Link?
CAIA ; Yes, not for NCP
JUMPN T3,IMPEI4 ; Give irreg msg to NCP
;Falls thru to IMPEI0
;Falls thru
IMPEI0:
IFN TCPF,<
SKIPGE TNBFFL ; Skip if TCP does not own IMIB
JRST [ HRLM T1,@TCPIBI ; Queue for Gateway
HRRZM T1,TCPIBI
AOS TCPFLG ; Cause TCP process to notice it
JRST IMPEI1] ; Avoid running NCP -- TCP buffer used
>
IFN BBNF,<
CAIN T4,TNTLNK ; TELENET LINK
JRST TNTEIN ; YES-PROCESS
LSH T4,-1 ; Link field for MLC traffic?
CAMN T4,MLCHLF ; Is it the MLC link field?
JRST IMPEIP ; YES-DO PTIP STUFF
>
MOVE T3,IMPIBI ; Add to NCP fork's queue
JUMPN T3,IMPEIA ; Anything on it already?
MOVEM T1,IMPIBO ; No. This is it, then.
SKIPA ; Don't chain it
IMPEIA: HRLM T1,0(T3) ; Add buffer to input queue for NCPFRK
MOVEM T1,IMPIBI ; This is the last guy on queue
AOS IMPFLG ; Request job 0 service
IMPEI1: LOAD T3,NBBSZ,(T1) ; Make sure not a released buffer
CAMLE T3,MAXWPM ; by checking size field for a PC
BUG (IMPAUF)
REPEAT 0,< ;DEC DECIDED TO LOCK BUFFERS ONLY ONCE
PUSH P,T1 ; Save buffer address
ADD T1,T3 ; Compute tail of bfr
MOVEI T1,-1(T1)
CALL MULKMP ; Unlock it
POP P,T1 ; Restore base of buffer
> ; End of repeat 0
LOAD T3,IMBFAD,IMPINP ; GET LAST LOC WITH DATA +1
SUB T3,IMIB ; Less base of the buffer
STOR T3,NBBSZ,(T1) ; RECORD ACTUAL COUNT IN BUFFER HEADER
IMPEI2: SETZM IMIB
SKIPLE IMPNFI ; More buffers available?
CALL IMISRT ; Yes, start new input
IMPUB1: DMOVE T1,IMPIAC+T1 ; Restore AC's from before PI
DMOVE T3,IMPIAC+T3
DMOVE CX,IMPICX
XJEN ANIVI1 ; AND DISMISS INPUT INTERRUPT
IFN BBNF,<
IMPEIP: MOVE T3,MLCIBI ;ANYTHING ON PTIP INPUT QUEUE YET?
JUMPN T3,IMPEP2 ;JUMP IF SO
MOVEM T1,MLCIBO ;NO, SO THIS IS THE FIRST ONE OUT
SKIPA ;DON'T TRY TO LINK IT
IMPEP2: HRLM T1,0(T3) ;LINK TO PREVIOUS LAST-IN
MOVEM T1,MLCIBI ;THIS IS NEW LAST-IN
MOVE T3,IMPNIB ; GET INPUT BUFFER THRESHOLD
LSH T3,-1 ; HALVE
CAML T3,IMPNFI ; DO WE HAVE MORE THAN THAT ON TAP?
AOS IMPFLG ; NO, GOOSE THE NCP SO IT WILL NOTICE
JRST IMPEI1 ; THAT MLC STOLE AN INPUT BUFFER
;GET A TELENET BUFFER AND XFER FROM ARPANET BUFFER TO IT
TNTEIN: PUSH P,P1 ;TNET'S MESSAGE POINTER
MOVE P1,T1 ;GET ANBSEC,,ADR OR ARPA BUFF
SUBI P1,1 ;TAKE CARE OF OFFSET
CALL GETMBF ;LET IT BLESS TEXT, GET A BUFFER.
JUMPL P1,TNTEIX ;JUMP IF NO BUFFER AVAIL
MOVE T2,IMIB ;FROM HERE
MOVE T3,P1 ;TO HERE
ADDI T3,1 ;WITH OFFSET
HRRZ T1,IMPINP ;ADR OF NEXT WORD TO BE FILLED
HRRZ T4,IMIB ;GET ADR OF START OF BUFFER
SUBI T1,-1(T4) ;T1/ # WORDS READ
HRRZ T4,1(P1) ;GET TELENET BUFFER'S LENGTH
CAMGE T4,T1 ;BIG ENOUGH FOR FULL BLT?
JRST TNTEIX ;NO - LOSE BUFFER
AOS T2 ;DON'T GET OVERHEAD WORD
AOS T3 ;DON'T CLOBBER SIZE WORD IN TEL BUFF
SOS T1 ;THEREFORE 1 LESS WORD TO DO
CALL XBLTA ;YES-DO XFER OF DATA
CALL TNTRCV ;P1/ ADR OF TNT BUFF JUST FILLED
TNTEIX: MOVE T1,IMIB ;RECOVER POINTER TO ARPANET BUFFER
POP P,P1 ;RESTORE AC
JRST IMPEI6 ;NOW FREE ARPA BUF SINCE WAS COPIED
> ;END IFN BBNF
IMPEI4: CALL IMP8XQ ; Put on irreg msg Q for NCP
AOS IMPFLG ; Awaken NCP
IMPEI3:
IFN TCPF,< ; Until TCP done
SKIPL TNBFFL ; IMIB owned by NCP?
JRST IMPEI6 ; Yes. Release to normal area
EXCH T1,TCPFRI ; Release to TCP
HRLM T1,@TCPFRI
AOS TCPNFI ; Count another free buffer
JRST IMPEI2
>
IMPEI6: MOVE T2,T1 ; Current buffer address
EXCH T1,IMPFRI ; Return buffer to Free Input list
HRLM T1,0(T2) ; Make it point to old top of list
AOS IMPNFI ; Count another free buffer
JRST IMPEI2
IMIERR: PUSH P,T1
SETOM IMPRDL ; Be sure this flap gets noticed
MOVNI T1,2
MOVEM T1,IMPFLS
MOVEI T1,3 ; GET NUMBER OF NOPs to send
MOVEM T1,NOPCNT ; Send some nops
CONI ANI,T1 ; SEE IF PIA'S ARE NOW ON
BUG (IMINX2,<<T1,CONIAN>>)
ANDI T1,77
CONO ANI,ANICLE(T1) ; CLEAR THE ERROR FLOP
MOVE T1,DBUGSW ; GET THE STATE OF DEBUGGING
CAIE T1,2 ; ARE WE DEBUGGING?
AOS IMPDRQ ; NO SO Cycle the net
JRST PA1 ; RESTORE AC T1, RETURN.
; Routine to start msg going out. called at pi level, and at
; Main level if no output in progress
IMPXOU::PIOFF
SKIPN IMPOB ; ANY OUTPUT IN PROGRESS?
JRST IMPXO1 ; NO
PION ; YES, TURN PI BACK ON
JRST (T4) ; AND RETURN
IMPXO1: SETOM IMPOB ; MARK OUTPUT IN PROGRESS
PION ; NO IT'S OK TO TURN PI BACK ON
PUSH P,T4 ; SAVE RETURN
IMPIOU: SKIPLE NOPCNT ; Any nop's to send?
JRST IOUNOP ; Yes, go send them
IFN TCPF,<
HLLZS TNBFFL ; Assume out buf will be NCP owned
>
MOVE T1,IMPHBO ; Hi priority msg waiting?
JUMPE T1,IMPIOT ; No, check lo priority
HLRZ T2,0(T1) ; Does it have a successor?
JUMPN T2,IMPIO1 ; Jump if so
SETZM IMPHBI ; If not, say no more to go
SKIPA ; And don't add network section
IMPIO1: HRLI T2,ANBSEC ; Section buffers are in
MOVEM T2,IMPHBO ; For next removal
IFN BBNF,<SETZM OUTMSG> ; SAY NOT DOING TELENET
JRST IMPIOC ; Send buffer in T1
IMPIOT:
REPEAT 0,< ;Until TCP done
; Select either a TCP buffer or low priority NCP buffer
; for output. Either of these will give credit to the
; other. When both are present, it is the one with the
; most credit that is used. This prevents one from
; strangling the other in high traffic situations.
HLRZ T1,TCPOBO
JUMPE T1,IMPIOL ; No TCP waiting. Go check NCP low pri.
HLRZ T1,IMPOBO
JUMPE T1,IMPIOO ; Jump if only TCP output waiting
SKIPG TCPNCP ; Both waiting. Which gets it?
JRST IMPIOZ ; NCP
HRRZ T1,TNPRIO ; Output from TCP. Credit NCP.
MOVNS T1
ADDM T1,TCPNCP ; More negative to favor NCP
IMPIOO: HLRZ T1,TCPOBO ; TCP message for output
HLLZ T2,0(T1) ; Get its successor
JUMPN T2,.+3 ; Jump if not last one
MOVEI T3,TCPOBO
MOVEM T3,TCPOBI
MOVEM T2,TCPOBO
HLLOS TNBFFL ; Remember out buf is TCP owned
IFN BBNF,<SETZM OUTMSG> ; SAY NOT DOING TELENET
JRST IMPIOC
TNPRIO: 1,,3 ; Diddlable constant: TCP,,NCP favoritism
IMPIOZ: HLRZ T1,TNPRIO ; Get amount of credit for TCP
ADDM T1,TCPNCP ; More positive to favor TCP next time
> ;End repeat 0 for TCP
IMPIOL: MOVE T1,IMPOBO ; Msg waiting to go out?
IFN BBNF,<JUMPN T1,IMPIOY ; YES - DO IT
MOVE T1,OUTREQ> ; NO - TELENET BUFFER TO DO?
JUMPE T1,[SKIPE T2,HSTGDM ; NO - HOST GOING DOWN?
JRST IOUHGD ; Send the host going down msg
CONO ANO,0 ; NONE TO SEND. TURN OFF OUTPUT.
MOVE T1,[MSEC1,,IMODN2] ; DISPATCH WHEN IT IS TURNED ON
MOVEM T1,IMODSP ; ..
SETZM IMPOB
RET]
IFN BBNF,<SETZM OUTREQ ; DO TELENET BUFFER, CLEAR REQUEST
MOVEM T1,OUTMSG ; IT IS ACTIVE TELENET MSG
ADDI T1,1 ; TNB.OS, OFFSET TO ARPANET FORMAT
JRST IMPIOC> ; SEND IT
IMPIOY: HLRZ T2,0(T1) ; Get bfr
JUMPN T2,IMPIO2
SETZM IMPOBI ; None to go after this one
SKIPA ; And leave off section number
IMPIO2: HRLI T2,ANBSEC ; Set buffer's section
MOVEM T2,IMPOBO
IFN BBNF,<SETZM OUTMSG> ; SAY NOT DOING TELENET
IMPIOC: MOVEM T1,IMPOB
SETZRO NBQUE,(T1) ; DeQueue buffer from its old chain
;Now decide on packing via message type
IFN BBNF,<
LOAD T2,IHLNK,(T1) ;Check for MLC OR TELENET traffic
CAIN T2,TNTLNK ;IS IT TELENET LINK?
JRST [ MOVEI T3,.IITNT ;YES. - PACK APPROPRIATELY
JRST IMPIOD]
LSH T2,-1
CAMN T2,MLCHLF ;PTIP link?
JRST [ MOVEI T3,.IIMLC ;Yes. pack in 36 bit mode
JRST IMPIOD]
IFN TCPF,<
HRRE T2,TNBFFL ; See who owns the out buffer
>
JUMPL T2,[MOVEI T3,.IIINT ; TCP. Set packing mode
JRST IMPIOD]
>
LOAD T2,IHHST,(T1) ;Check host and link for NCP range
LOAD T3,IHLNK,(T1) ; ..
CAIGE T2,FKHOST ;Special to-imp group?
CAILE T3,LLINK ;Or link out of range?
JRST [ MOVEI T3,.IISPQ ;Yes, special queue formatting.
JRST IMPIOD]
LOAD T2,HHSIZ,(T1) ;NCP will have set up packing mode
CAIE T2,^D36 ;Is it 36 bit mode?
SKIPA T3,[.IINC2] ;No, it is 8 or 32.
MOVEI T3,.IINC6 ;Select 36 bit mode
IMPIOD: MOVE T2,[MSEC1,,IMOLDR] ;Where to go on next interrupt
MOVEM T2,IMODSP ; ..
MOVEM T3,IMOTYP ;Remember packing type decision
MOVEI T2,.NBLD0(T1) ;First word to send out
HRLI T2,(<.NBLD2+1>B12) ;Send first three words and some fills
TLO T2,ANBSEC ;From this section
CONO ANO,ANXWAR ; Select word-count and addr register
DATAO ANO,T2 ; Tell it what to send
CONO ANO,ANOM36+ANOBSY+ANOCLE+ANXCHS ; Send it in 36-bit mode
RET ; Done with start-up-output routine
; Here at PI level when leader and first fill word have been sent.
; No AC's saved yet. Now re-send some more fill, and send H-H leader.
IMOLDR: DMOVEM T1,IMPIAC+T1 ;Save standard interrupt level AC's
DMOVEM T3,IMPIAC+T3 ; ..
DMOVEM CX,IMPICX ; ..
MOVE P,PIMSTK ; And set up a local PI level stack
MOVE T1,[MSEC1,,IMOLD3] ;Where to come on next interrupt
MOVEM T1,IMODSP ; ..
MOVE T1,IMPOB ;Buffer we are working on
MOVE T4,IMOTYP ;Get the packing control
MOVEI T2,.NBHHL-1(T1) ;Resend another word as pads, then H-H leader
HLL T2,II1WCT(T4) ;Set up right count
TLO T2,ANBSEC ;In the right section
DATAO ANO,T2 ;Send those words
LOAD T3,NBBSZ,(T1) ;That might be all. Check size of buffer
CAILE T3,.NBHHL ;Just that much?
TDZA T2,T2 ;There's more than that.
MOVEI T2,ANOEND ;That's all. Include End of Msg bit
IOR T2,IO1CNO(T4) ;Plus the right word size, etc.
CONO ANO,0(T2)
JRST IMPUBO ;Finished that output interrupt.
IO1CNO: ANOM36+ANOBSY+ANXCHS ;NCP 36 BIT MODE
ANOM36+ANOBSY+ANXCHS ;NCP 32 BIT MODE
ANOM36+ANOBSY+ANXCHS ;TELENET MODE
ANOBSY+ANXCHS ;SPECIAL QUEUES
ANOBSY+ANXCHS ;Internet MODE
ANOM36+ANOBSY+ANXCHS ;MLC/PTIP MODE
ANOM36+ANOBSY+ANXCHS ;Not referenced here
IO2CNO: ANOM36+ANOEND+ANOBSY+ANXCHS ;NCP 36 BIT MODE
ANOEND+ANOBSY+ANXCHS ;NCP 32 BIT MODE
ANOM36+ANOEND+ANOBSY+ANXCHS ;TELENET MODE
ANOEND+ANOBSY+ANXCHS ;SPECIAL QUEUES
ANOEND+ANOBSY+ANXCHS ;Internet MODE
ANOM36+ANOEND+ANOBSY+ANXCHS ;MLC/PTIP MODE
ANOM36+ANOEND+ANOBSY+ANXCHS ;Not referenced here
;Here after completing the above, again on PI level. If more
; words to send, set them up.
IMOLD3: CONSZ ANO,ANODON ;Was it a short message?
JRST IMODN0 ;Yes, go wrap up. Release buffer, etc.
DMOVEM T1,IMPIAC+T1 ;Save standard interrupt level AC's
DMOVEM T3,IMPIAC+T3 ; ..
DMOVEM CX,IMPICX ; ..
MOVE P,PIMSTK ; And set up a local PI level stack
MOVE T1,IMPOB ;Buffer we have been sending
MOVE T4,IMOTYP ;Get the packing control
LOAD T2,NBBSZ,(T1) ;How many words in it?
MOVE T3,II2LDT(T4) ;How far we have done so far
SUBI T2,0(T3) ;Less those sent above
LSH T2,^D<35-12> ;Position for AN10 word count
HRR T2,T1 ;Next word to go out.
ADDI T2,0(T3) ; ..
TLO T2,ANBSEC ;In the buffer section
MOVEM T2,IMPOUP
DATAO ANO,IMPOUP ;Tell it what data to send
HRRZ T3,IO2CNO(T4) ;Bits for CONO
CONO ANO,0(T3) ;And make it go
MOVE T3,[MSEC1,,IMODN0] ;When done, we will release the buffer
MOVEM T3,IMODSP ; ..
JRST IMPUBO ;Now dismiss this interrupt.
;Here to make a Host Going Down message
IOUHGD: MOVEI T3,0 ;Build the message in 2 and 3
LSHC T2,-^D8
DMOVEM T2,IIMBUF+1 ;And use the special irreg msg buffer
MOVE T2,H2IHGD ;Pattern for message type
MOVEM T2,IIMBUF ; ..
MOVEI T2,IIMBUF ;Now send this to IMP
JRST IOUIRG ;Go send it
IOUNOP: SOS NOPCNT
MOVEI T2,H2INOP ;Send a NOP message
IOUIRG: HRLI T2,(<.NBLD2>B12) ;Length of the msg
CONO ANO,ANXWAR ; SET FOR WD CT / ADDR REGISTER
TLO T2,MSEC1 ;These consts and temps are in mon section
DATAO ANO,T2 ;Send the irreg message
CONO ANO,ANOM36+ANOBSY+ANOEND+ANXCHS ;Start it, 36-bit mode
MOVE T1,[MSEC1,,IMODN2] ;When done, no buffer to release
MOVEM T1,IMODSP
RET
;Prototypes of the two H2I irreg messages we ever send.
;The NOP message has the padding control in it.
H2INOP: BYTE (4)0,ITY%LL (16)0 (8).IHNOP (4)0
EXP 0
BYTE (4)0,STY%NP
H2IHGD: BYTE (4)0,ITY%LL (16)0 (8).IHHGD (4)0
;; BYTE (4)0 (24)0 (3)DayOfWeek (5)Hour
;; BYTE (4)5MinPeriod, Reason
; Pi service for output
;HERE AFTER "OUT DONE" INTERRUPT FOR A REAL BUFFER
IMODN0: DMOVEM T1,IMPIAC+T1 ; Save standard interrupt level AC's
DMOVEM T3,IMPIAC+T3 ; ..
DMOVEM CX,IMPICX ; ..
MOVE P,PIMSTK ; And set up a local PI level stack
CALL IMODUN ; POST COMPLETION, FREE THE BUFFER
MOVE T1,IMPOB
CALL IMULKB ; Unlock bfr
IMPDO4: SETZM IMPOB ; Mark no output in progress
CALL IMPIOU ; Start next msg if any
IMPUBO: DMOVE T1,IMPIAC+T1 ; Restore AC's from before PI
DMOVE T3,IMPIAC+T3
DMOVE CX,IMPICX
XJEN ANOVI1 ; AND DISMISS INTERRUPT
;HERE AFTER "OUT DONE" INTERRUPT WHEN NO BUFFER TO RELEASE.
IMODN2: DMOVEM T1,IMPIAC+T1 ; Save standard interrupt level AC's
DMOVEM T3,IMPIAC+T3 ; ..
DMOVEM CX,IMPICX ; ..
MOVE P,PIMSTK ; And set up a local PI level stack
JRST IMPDO4
;STATUS CHECK SUBROUTINES
IMPRLQ::PUSH P,T1 ;SAVE AN AC
CONI ANI,T1 ;GET CURRENT STATUS
TLNE T1,(1B4+1B5) ;IS IT POWERED UP, WITH A CABLE IN IT?
TRNE T1,ANIIID ;YES. IS READY LINE ALSO OK?
SKIPA ;NO, IT ISN'T READY.
AOS -1(P) ;ALL IS WELL. SKIP RETURN.
JRST PA1 ;RESTORE AC1 AND RETURN
;HERE FROM DOWN-SEQUENCE PROCESSING IN NCPFRK TO COMPLETELY
; SHUT OFF THE HARDWARE DEVICE
IDVKIL::CONO ANO,0 ;TURN OFF OUTPUT SIDE
CONO ANI,ANIRST ;CLEAR DEVICE
CONO ANI,ANXVAR ;HAVE TO POINT TO WHERE HOST READY IS
DATAO ANI,[<0*ANIHRL>+MSEC1B+ANIVIL] ;CLEAR READY, LEAVE
; LEAVE INTERRUPT ADDRESS ALONE.
RET
;CALL HERE FROM IMPIN0 (ONLY FROM NCPFRK) AT INITIALIZATION OF
; BACKGROUND FORK - NOT ON EVERY RECYCLE OF READY LINE.
IMPRSD::MOVE T1,[MSEC1,,IMIN0X] ;RESET DISPATCHES
MOVEM T1,IMIDSP ;INPUT PI DISPATCH TO SHUT OFF DEVICE
MOVE T1,[MSEC1,,IMODN2] ;OUTPUT PI DISPATCH TO START NEW MSG
MOVEM T1,IMODSP
RET
;CALL HERE FROM NCPFRK, PROCESS LEVEL, WHEN IMP IS WANTED UP
; BUT NET IS CURRENTLY DOWN.
IMPRSS::CALL IMPRLQ ; IS IMP ON AND READY?
RET ; No, stop here
CALL IMPRSN ; Reset variables
SETZM IMPRDL ; And notices of IMP ERROR
CONO ANI,ANIRST ; CLEAR THE DEVICE
CONO ANI,ANXVAR+ANICLE ; SET VECTOR ADDRESS WORDS
DATAO ANI,[ANIHRL+MSEC1B+ANIVIL] ; SET THE HOST READY LINE
CONO ANO,ANOCLE+ANXVAR ; SAME FOR OUTPUT
DATAO ANO,[MSEC1,,ANOVIL] ; VECTOR INT LOCATION FOR OUTPUT
SETZM IMPDRQ ; Forget any intervening down requests
MOVNI T1,2
MOVEM T1,IMPFLS ; Init flush count
MOVEI T1,3
MOVEM T1,NOPCNT
MOVEI T1,^D1000
DISMS ; Allow time for ready line to settle
AOS NETTCH ; Cause change in state to be noted
AOS JB0FLG
GTAD ; Yes
MOVEM T1,NCPUPT ; Save time whe it came up
CONO ANO,ANOBSY+ANXCHS ; TELL OUTPUT SIDE TO GO.
SKIPLE IMPNFI ; If input bfrs available,
CALL IMISRT ; Start input
SETOM IMPRDY
SETOM IMPORD ; Allow output
MOVE T1,NLHOST ; Local host
CALL IMPRRP ; Send ourselves an rrp
RET
;Dummy routine to init IMP interface
IMPINI::RET
IMPFPF:: ; ROUTINE TO DETERMINE IF AN10/20 CAUSED
; AN IOPGF....PAGE NUMBER IS IN T1
CONO ANI,ANXWAR ; SELECT INPUT SIDE WORD ADR REG.
DATAI ANI,T2 ; GET THE WORD ADR REGISTER CONTENTS
CONO ANO,ANXWAR ; SELECT OUTPUT SIDE WORD ADR REG.
DATAI ANO,T3 ; GET THE WORD ADR REGISTER CONTENTS
LOAD T2,VPGNO,T2 ; GET THE PAGE NUMBER INPUT WORKING ON
LOAD T3,VPGNO,T3 ; GET THE PAGE NUMBER OUTPUT WORKING ON
CAME T1,T2 ; INPUT SIDE CAUSE IOPGF?
CAMN T1,T3 ; OUTPUT SIDE CAUSE IOPGF?
SKIPA ; YES
RET ; NO WE DID NOT CAUSE IT
CALL IDVKIL ; WE CAUSED IOPGF SO SHUT OFF DEVICE
BUG(IMPIOP) ; TELL THE WORLD WE CAUSED IT
JRST RSKP ; SKIP RETURN TO CALLER
TNXEND
END ; OF IMPPHY