Trailing-Edge
-
PDP-10 Archives
-
BB-M081Y-SM
-
monitor-sources/physio.mac
There are 56 other files named physio.mac in the archive. Click here to see a list.
; Edit= 9148 to PHYSIO.MAC on 21-Feb-90 by GSCOTT
;Update copyright date.
; Edit= 9058 to PHYSIO.MAC on 12-Jan-89 by GSCOTT
;Add SMON function .SFBUG to set SAVTRE. Reverse sense of SMON function
;.SFHDT. ITRAP on errors in SMON function .SFDCD.
; Edit= 9004 to PHYSIO.MAC on 8-Nov-88 by LOMARTIRE
;Merge Production changes to BUG text
; Edit= 8980 to PHYSIO.MAC on 6-Oct-88 by GSCOTT
;*PERFORMANCE* Don't do PDB reads or writes on disks that cannot possibly be
;accessed by another KL10 system (disk single ported and not MSCP served).
;Also don't light U1.OFS when there is no CI and the disk has both MASSBUS
;ports connected to this system.
; Edit= 8908 to PHYSIO.MAC on 16-Aug-88 by GSCOTT
;Update BUG. documentation.
; Edit= 8833 to PHYSIO.MAC on 20-Apr-88 by RASPUZZI (TCO 7.1278)
;Install TCO 7.1278 - supress ONSTR/OFFSTR and make RELRNG a BUGCHK again.
;TCO 7.1278 - Put ONSTR and OFFSTR under CIBUGX.
; UPD ID= 8594, RIP:<7.MONITOR>PHYSIO.MAC.14, 11-Feb-88 16:57:01 by GSCOTT
;TCO 7.1218 - Update copyright date.
; UPD ID= 8439, RIP:<7.MONITOR>PHYSIO.MAC.13, 4-Feb-88 16:10:48 by GSCOTT
;TCO 7.1210 - Set OFFSTR, ONSTR, OVRDTA, PDBSTA, PHYCPI, PHYDCD, PHYDCR,
; PHYDCU, and PHYNOS normally not dumpable.
; UPD ID= 312, RIP:<7.MONITOR>PHYSIO.MAC.12, 24-Nov-87 17:44:27 by GSCOTT
;More of TCO 7.1148 - Coding standard on ANSKP.
; UPD ID= 310, RIP:<7.MONITOR>PHYSIO.MAC.11, 24-Nov-87 17:02:33 by GSCOTT
;TCO 7.1148 - Allocate dual port dual path drives better, put odd numbered
; disk on odd numbered channel, even drive on even channel.
; UPD ID= 267, RIP:<7.MONITOR>PHYSIO.MAC.10, 6-Nov-87 11:56:40 by GSCOTT
;TCO 7.1117 - Remove DRMJ0R from DRMINI
; UPD ID= 252, RIP:<7.MONITOR>PHYSIO.MAC.9, 4-Nov-87 16:43:23 by MCCOLLUM
;TCO 7.1112 - Don't allow the Login Structure to be set offline
; UPD ID= 207, RIP:<7.MONITOR>PHYSIO.MAC.8, 23-Oct-87 15:34:40 by GSCOTT
;TCO 7.1081 - Make GETSTR RESCD so that DOB can call it.
; UPD ID= 134, RIP:<7.MONITOR>PHYSIO.MAC.7, 23-Sep-87 15:46:42 by MCCOLLUM
;TCO 7.1063 - Implement Offline Structures in UNICHK. Add routines
; UDBCHK and STRSCN.
; UPD ID= 65, RIP:<7.MONITOR>PHYSIO.MAC.6, 11-Aug-87 15:55:56 by GSCOTT
;TCO 7.1035 - Prevent PDBSTAs when CHBDON called with P3/secondary UDB
; UPD ID= 32, RIP:<7.MONITOR>PHYSIO.MAC.5, 30-Jun-87 12:03:43 by LOMARTIRE
;TCO 7.1015 - Prevent incorrect TCSOFN by issuing BUGHLT only on disk write
; UPD ID= 20, RIP:<7.MONITOR>PHYSIO.MAC.4, 16-Jun-87 12:20:09 by LOMARTIRE
;TCO 7.1011 - Make PNUM global so it can be called from CFSJYN
; UPD ID= 11, RIP:<7.MONITOR>PHYSIO.MAC.3, 28-May-87 16:11:40 by RASPUZZI
;TCO 7.1002 - Implement PMOVE/M instructions.
; *** Edit 7402 to PHYSIO.MAC by MCCOLLUM on 11-Dec-86
; Put PHYCPI BUGINF under the CIBUGX switch.
; *** Edit 7357 to PHYSIO.MAC by RASPUZZI on 22-Aug-86
; Remove routine GAPRID since the processor serial number is already in APRSER
; and make all CALLs to GAPRID refer to that resident location.
; *** Edit 7352 to PHYSIO.MAC by JROSSELL on 11-Aug-86, for SPR #21161
; Have .DSKOP return an error if an error occurs during a transfer
; *** Edit 7340 to PHYSIO.MAC by MCCOLLUM on 24-Jul-86, for SPR #21334
; Fix FELOOP so end-of-loop test is always executed.
; *** Edit 7312 to PHYSIO.MAC by LOMARTIRE on 3-Jun-86
; Take MS%SVD out from under DEBUG conditional
; *** Edit 7264 to PHYSIO.MAC by MCCOLLUM on 11-Mar-86, for SPR #21150
; Set up NPWQPD BUGCHK with channel, controller, and unit as data
; *** Edit 7247 to PHYSIO.MAC by LOMARTIRE on 19-Feb-86
; Implement OFN caching
;Edit 7247 - Check DRMIO/DSKIO to see if any cached OFN pages are transfered
; *** Edit 7193 to PHYSIO.MAC by WONG on 14-Nov-85
; Fix undefined symbol (LPTTIM) when LPTN=0
; Edit 7157 to PHYSIO.MAC by TBOYLE on 15-Oct-85 (TCO 6-1-1526)
; Remove IORB Retry, edit 7137 did not make it in.
;Remove IORB retry code for RP20's as it causes more problems than it solves.
; at HNGIRB and HNGIR2 do not make RP20's set once a minute check.
; reomve SETOMS routine.
; Edit 7154 to PHYSIO.MAC by GRANT on 15-Oct-85
; Fix bug which prevents monitor from finding all the disks ported to the FE.
;Fix routines PHYFED and FESET.
; Edit 7137 to PHYSIO.MAC by TBOYLE on 15-Aug-85 (TCO 6-1-1526)
; Remove IORB retry code.
; UPD ID= 2282, SNARK:<6.1.MONITOR>PHYSIO.MAC.203, 25-Jun-85 15:24:14 by GRANT
;TCO 6.1.1473 - Check for UDB%MA in UPDPDB.
; UPD ID= 2264, SNARK:<6.1.MONITOR>PHYSIO.MAC.202, 21-Jun-85 12:41:04 by GRANT
;TCO 6.1.1468 - Change PHYTPD to PHYCPI and improve the description
; UPD ID= 2166, SNARK:<6.1.MONITOR>PHYSIO.MAC.201, 5-Jun-85 10:43:40 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 2024, SNARK:<6.1.MONITOR>PHYSIO.MAC.200, 28-May-85 12:14:51 by MCCOLLUM
;TCO 6.1.1238 - Fix more BUG. documentation
; UPD ID= 1927, SNARK:<6.1.MONITOR>PHYSIO.MAC.199, 7-May-85 21:46:55 by MCCOLLUM
;TCO 6.1.1238 - Fix more BUG. documentation
; UPD ID= 1850, SNARK:<6.1.MONITOR>PHYSIO.MAC.198, 30-Apr-85 13:47:32 by MCCOLLUM
;TCO 6.1.1238 - Fix BUG. documentation
; UPD ID= 1835, SNARK:<6.1.MONITOR>PHYSIO.MAC.197, 26-Apr-85 11:19:52 by MCCOLLUM
;Change PHYDCD and PHYDCU to BUGINF's
; UPD ID= 1779, SNARK:<6.1.MONITOR>PHYSIO.MAC.196, 23-Apr-85 08:52:22 by GRANT
;TCO 6.1.1335 - In PHYDUA, remove code which revented switching a dual-ported
;disk from one channel to the other.
; UPD ID= 1761, SNARK:<6.1.MONITOR>PHYSIO.MAC.195, 17-Apr-85 13:13:49 by GRANT
;TCO 6.1.1325 - change console message when disk is forced offline
; UPD ID= 1680, SNARK:<6.1.MONITOR>PHYSIO.MAC.194, 25-Mar-85 12:04:38 by LOMARTIRE
;TCO 6.1.1286 - Return new MS%IAC if offline due to homeblock checking
; UPD ID= 1641, SNARK:<6.1.MONITOR>PHYSIO.MAC.193, 15-Mar-85 08:24:55 by GRANT
;TCO 6.1.1272 - Rewrite routine UPDPDB (no logic changes)
; UPD ID= 1616, SNARK:<6.1.MONITOR>PHYSIO.MAC.192, 12-Mar-85 09:05:53 by GRANT
;TCO 6.1.1235 - In routine CHKPDB, check for SIXBIT/DONOCA/ instead of non-zero
; UPD ID= 1585, SNARK:<6.1.MONITOR>PHYSIO.MAC.191, 5-Mar-85 10:42:58 by GRANT
;More TCO 6.1.1220 - Put check for MS%SVD under debug
; UPD ID= 1565, SNARK:<6.1.MONITOR>PHYSIO.MAC.190, 25-Feb-85 12:33:14 by GRANT
;TCO 6.1.1220 - In GETSTR, check for unit being served
; UPD ID= 1555, SNARK:<6.1.MONITOR>PHYSIO.MAC.189, 20-Feb-85 17:29:25 by GRANT
;TCO 6.1.1200 - Create routine SETDSN and remove UDBDSH setting from routine PHYDUA.
; UPD ID= 1526, SNARK:<6.1.MONITOR>PHYSIO.MAC.188, 18-Feb-85 11:20:52 by GRANT
;TCO 6.1.1201 - In PHYDUA, change P3 to P1 so we correctly get CDBSTS.
; UPD ID= 1506, SNARK:<6.1.MONITOR>PHYSIO.MAC.187, 12-Feb-85 10:25:25 by GRANT
;TCO 6.1.1189 - Move some code from CLRPDB to CHKPDB and create RSTPDB and a
;new CLRPDB.
; UPD ID= 1501, SNARK:<6.1.MONITOR>PHYSIO.MAC.186, 12-Feb-85 07:57:31 by GRANT
;TCO 6.1.1187 - In UPDPDB, clear U1.OFS at UPDBYE.
; UPD ID= 1497, SNARK:<6.1.MONITOR>PHYSIO.MAC.185, 11-Feb-85 09:01:37 by GRANT
;TCO 6.1.1184 - In UPDPDB, check for other system being a 20 when REQUEST-IDs
;are being answered but there is no CFS connection.
; UPD ID= 1487, SNARK:<6.1.MONITOR>PHYSIO.MAC.184, 7-Feb-85 08:33:26 by GRANT
;TCO 6.1.1180 - In CLRPDB, change SKIPGE to SKIPL so PTHSTS gets called.
; UPD ID= 1430, SNARK:<6.1.MONITOR>PHYSIO.MAC.183, 31-Jan-85 07:54:00 by GRANT
;TCO 6.1.1164 - In CHKPDB, remove special check for RP20.
; UPD ID= 1397, SNARK:<6.1.MONITOR>PHYSIO.MAC.182, 23-Jan-85 16:12:43 by GRANT
;TCO 6.1.1153 - Add PHYDCU, PHYDCD, and PHYDCR BUGxxx for DON'T-CARE status
; UPD ID= 1363, SNARK:<6.1.MONITOR>PHYSIO.MAC.181, 18-Jan-85 22:02:18 by GRANT
;Routine headers, comments, coding conventions, etc.
; UPD ID= 1351, SNARK:<6.1.MONITOR>PHYSIO.MAC.180, 16-Jan-85 16:43:30 by MOSER
;TCO 6.1.1139 - *PERFORMANCE* - CHANGE PSKED REFS TO PSKD1
; UPD ID= 1326, SNARK:<6.1.MONITOR>PHYSIO.MAC.179, 14-Jan-85 13:57:31 by GRANT
;More TCO 6.1.1116 - Missing AC
; UPD ID= 1282, SNARK:<6.1.MONITOR>PHYSIO.MAC.178, 7-Jan-85 09:04:00 by GRANT
;More TCO 6.1.1116 - Check for don't-care, too.
; UPD ID= 1280, SNARK:<6.1.MONITOR>PHYSIO.MAC.177, 7-Jan-85 08:34:44 by GRANT
;TCO 6.1.1116 - In GETSTR, add checking for front-end disks.
; UPD ID= 1228, SNARK:<6.1.MONITOR>PHYSIO.MAC.176, 19-Dec-84 16:18:14 by HAUDEL
;TCO 6.1.1095 - Set US.OIR when setting US.BOT for overdue tape rewind done.
; UPD ID= 1227, SNARK:<6.1.MONITOR>PHYSIO.MAC.175, 19-Dec-84 15:01:14 by TBOYLE
;Change PDV.. to PDB...
; UPD ID= 1221, SNARK:<6.1.MONITOR>PHYSIO.MAC.174, 18-Dec-84 13:09:05 by MCLEAN
;FIX FOR TPD SERVER DISKS THRU THE SERVER
; UPD ID= 1194, SNARK:<6.1.MONITOR>PHYSIO.MAC.173, 12-Dec-84 14:57:45 by TBOYLE
;Change BUGCHK name of PDVSTA to PDBSTA.
; UPD ID= 1111, SNARK:<6.1.MONITOR>PHYSIO.MAC.172, 20-Nov-84 15:35:52 by MCLEAN
; UPD ID= 5079, SNARK:<6.MONITOR>PHYSIO.MAC.172, 20-Nov-84 15:24:08 by MCLEAN
;FIX JUMPE IN UPDXIT-1
; UPD ID= 5076, SNARK:<6.MONITOR>PHYSIO.MAC.171, 19-Nov-84 14:10:40 by MCLEAN
;INSURE PDB ALWAYS GETS CLEARED ON SINGLE PORT NO MATTER WHAT.
; UPD ID= 5065, SNARK:<6.MONITOR>PHYSIO.MAC.170, 7-Nov-84 13:22:14 by MOSER
;TCO 6.2271 - ADD CHKCKS,ADVCKS,FNDCKS FOR "RELATIVE" UNIT NUMBERING
; UPD ID= 5042, SNARK:<6.MONITOR>PHYSIO.MAC.169, 30-Oct-84 15:33:48 by MCLEAN
;REMOVE DEFINITION TO PDBLEN
; UPD ID= 5035, SNARK:<6.MONITOR>PHYSIO.MAC.168, 29-Oct-84 16:28:30 by MCLEAN
;SOME FIXES FOR NON-CI DISKS
; UPD ID= 5032, SNARK:<6.MONITOR>PHYSIO.MAC.167, 29-Oct-84 13:34:53 by MCLEAN
;FIX MESSED UP UDBSTR REFERENCE IN UNIMES
; UPD ID= 4992, SNARK:<6.MONITOR>PHYSIO.MAC.166, 24-Oct-84 17:22:44 by MCLEAN
;ADD PHYSTC CALL TO DCUNIT
; UPD ID= 4991, SNARK:<6.MONITOR>PHYSIO.MAC.165, 24-Oct-84 16:30:14 by MCLEAN
;RE-ORDER US.CHB AND U1.STC SO STC IS FIRST
; UPD ID= 4987, SNARK:<6.MONITOR>PHYSIO.MAC.164, 24-Oct-84 13:07:58 by MCLEAN
;EXTRANEOUS POP T2 IN UDSKIO
; UPD ID= 4980, SNARK:<6.MONITOR>PHYSIO.MAC.163, 23-Oct-84 14:42:53 by MCLEAN
;FIX SETTING DRIVE U1.OFS ONLINE WHEN SETTING DON'T CARE BIT
; UPD ID= 4977, SNARK:<6.MONITOR>PHYSIO.MAC.162, 22-Oct-84 16:32:15 by GRANT
;Remove references to FTCI
; UPD ID= 4970, SNARK:<6.MONITOR>PHYSIO.MAC.161, 22-Oct-84 11:26:33 by GRANT
;In CHK8, missing index register in previous edit.
; UPD ID= 4969, SNARK:<6.MONITOR>PHYSIO.MAC.160, 22-Oct-84 10:00:16 by MCLEAN
;FIX SOME WORD REFERENCES TO UDBSTR
; UPD ID= 4963, SNARK:<6.MONITOR>PHYSIO.MAC.159, 18-Oct-84 20:43:48 by MCLEAN
;ANOTHER FIX TO CHK20A
; UPD ID= 4962, SNARK:<6.MONITOR>PHYSIO.MAC.158, 18-Oct-84 20:34:49 by MCLEAN
;FIX DON'T CARE DISK ALSO FIX NO CI CASE
; UPD ID= 4950, SNARK:<6.MONITOR>PHYSIO.MAC.157, 17-Oct-84 15:49:33 by MCLEAN
;MAKE DON'T CARE ONLY WORK FOR SETTING BIT
; UPD ID= 4949, SNARK:<6.MONITOR>PHYSIO.MAC.156, 17-Oct-84 15:43:42 by MCLEAN
;FIX DCUNIT
; UPD ID= 4942, SNARK:<6.MONITOR>PHYSIO.MAC.155, 16-Oct-84 15:24:59 by MCLEAN
;SUPPORT FOR OVERDUE DATA REQUESTS OF RP20'S.
; UPD ID= 4939, SNARK:<6.MONITOR>PHYSIO.MAC.154, 15-Oct-84 13:12:05 by GRANT
;The assembly switch CFSCOD has been eliminated
; UPD ID= 4926, SNARK:<6.MONITOR>PHYSIO.MAC.153, 15-Oct-84 10:35:54 by MCLEAN
;FIX FOR OFFLINE WHEN CFS CALLS TO SAY OFFLINE
; UPD ID= 4889, SNARK:<6.MONITOR>PHYSIO.MAC.152, 30-Sep-84 20:08:28 by MCLEAN
;FIX SERIAL NUMBER PRINTOUT.
;tco 6.2232
; UPD ID= 4881, SNARK:<6.MONITOR>PHYSIO.MAC.151, 25-Sep-84 23:25:32 by MCLEAN
;UPDATE UPDPDB TO INCLUDE CHECKS FOR NON-CI PROCESSORS
; UPD ID= 4865, SNARK:<6.MONITOR>PHYSIO.MAC.150, 24-Sep-84 14:34:41 by MCLEAN
;FIX CLRPDB FOR CDBNOD -1
; UPD ID= 4858, SNARK:<6.MONITOR>PHYSIO.MAC.149, 20-Sep-84 11:13:35 by MCLEAN
;FIX MESSED UP CHECK FOR DOP%PS AND SECTOR SIZE WRITTEN
;FIX MESSED UP BUGCHK MESSAGE
; UPD ID= 4853, SNARK:<6.MONITOR>PHYSIO.MAC.148, 17-Sep-84 14:01:13 by MCLEAN
;REMOVE PRTTBU
; UPD ID= 4828, SNARK:<6.MONITOR>PHYSIO.MAC.147, 17-Sep-84 10:44:09 by PURRETTA
;Update copyright notice
; UPD ID= 4821, SNARK:<6.MONITOR>PHYSIO.MAC.146, 17-Sep-84 10:17:02 by MCLEAN
;FIX TXNE TO TDNE
; UPD ID= 4795, SNARK:<6.MONITOR>PHYSIO.MAC.145, 9-Sep-84 20:32:06 by MCLEAN
;ADD CHANNEL SKIP COMMAND FOR RP20'S
; UPD ID= 4791, SNARK:<6.MONITOR>PHYSIO.MAC.144, 5-Sep-84 21:39:51 by MCLEAN
;FIX UNITRY TO START HOMEBLOCK REQUESTS FIRST
; UPD ID= 4789, SNARK:<6.MONITOR>PHYSIO.MAC.143, 4-Sep-84 14:45:18 by MCLEAN
;FIX PARTIAL PAGE TRANSFERS AT UIO3
; UPD ID= 4787, SNARK:<6.MONITOR>PHYSIO.MAC.142, 31-Aug-84 20:38:01 by MCLEAN
;FIX PYCOFF COMMENTS TO IMPLY NO T3 REQUIRED
; UPD ID= 4761, SNARK:<6.MONITOR>PHYSIO.MAC.141, 27-Aug-84 13:38:28 by MCLEAN
;FIX SKIPE PROINI TO SKIPE PROFLG
; UPD ID= 4754, SNARK:<6.MONITOR>PHYSIO.MAC.140, 26-Aug-84 21:07:11 by MCLEAN
;THE GREAT CHANGE FOR PROTECTING DUAL PORTED DISKS
; UPD ID= 4700, SNARK:<6.MONITOR>PHYSIO.MAC.138, 15-Aug-84 22:39:24 by MCLEAN
;FIX PHYINT JRST TO INT2 TO ZERO P5
; UPD ID= 4629, SNARK:<6.MONITOR>PHYSIO.MAC.137, 29-Jul-84 22:40:38 by MCLEAN
;FIX PHYALL ADD Q1,T3 TO ADD T3,Q1
; UPD ID= 4626, SNARK:<6.MONITOR>PHYSIO.MAC.136, 29-Jul-84 10:07:01 by PAETZOLD
;TCO 6.2152 - Fix code at UPDPD1 to not cause PITRAPs.
; UPD ID= 4604, SNARK:<6.MONITOR>PHYSIO.MAC.135, 27-Jul-84 13:01:38 by MCLEAN
;FIX MISSING INSTRUCTION IN PHYALL
; UPD ID= 4590, SNARK:<6.MONITOR>PHYSIO.MAC.134, 26-Jul-84 10:29:55 by MCLEAN
;MAKE PHYALC ONLY ALLOCATE ON PAGE BOUNDARY'S
; UPD ID= 4589, SNARK:<6.MONITOR>PHYSIO.MAC.133, 25-Jul-84 21:30:02 by MCLEAN
;OPTIMIZATION OF PHYSTC SO THAT IT DOESN'T CHECK FED AND DCD DISK'S
; UPD ID= 4584, SNARK:<6.MONITOR>PHYSIO.MAC.132, 24-Jul-84 22:29:33 by MCLEAN
;MORE FIXES FOR HOME BLOCK CHECKING
; UPD ID= 4575, SNARK:<6.MONITOR>PHYSIO.MAC.131, 21-Jul-84 18:58:49 by MCLEAN
;PUT IN MISSING LABEL
; UPD ID= 4574, SNARK:<6.MONITOR>PHYSIO.MAC.130, 20-Jul-84 22:32:58 by MCLEAN
;FIX STRTIO SO IT DOESN'T GO TO SETOIR AND LEAVE REQUESTS ON
;TWQ FOR THE CI
; UPD ID= 4573, SNARK:<6.MONITOR>PHYSIO.MAC.129, 20-Jul-84 15:18:15 by MCLEAN
;CHANGE UNIT CHECKING CODE FOR CI
; UPD ID= 4571, SNARK:<6.MONITOR>PHYSIO.MAC.128, 19-Jul-84 19:25:46 by MCLEAN
;GOT CARRIED AWAY REMOVING CODE FROM UPDPDB
; UPD ID= 4563, SNARK:<6.MONITOR>PHYSIO.MAC.127, 18-Jul-84 20:30:26 by MCLEAN
;FIX RANDOM SETZ IN UPDPDB
; UPD ID= 4560, SNARK:<6.MONITOR>PHYSIO.MAC.126, 18-Jul-84 18:29:31 by MCLEAN
;MORE CHANGES FOR HOME BLOCK CHECKS
; UPD ID= 4430, SNARK:<6.MONITOR>PHYSIO.MAC.125, 4-Jul-84 22:15:50 by MCLEAN
;ADD CHANGES FOR NEW HOME BLOCK AND PDB BLOCK
; UPD ID= 4359, SNARK:<6.MONITOR>PHYSIO.MAC.124, 18-Jun-84 16:59:44 by MCLEAN
;FIX FIXIRB FOR INDEX REGISTER FOR SECPAG
; UPD ID= 4331, SNARK:<6.MONITOR>PHYSIO.MAC.123, 13-Jun-84 21:22:32 by MCLEAN
;MANY CHANGE FOR DOP%PS
; UPD ID= 4253, SNARK:<6.MONITOR>PHYSIO.MAC.120, 29-May-84 22:19:28 by MCLEAN
;MAKE CHANGES FOR DOP%PS
; UPD ID= 4239, SNARK:<6.MONITOR>PHYSIO.MAC.119, 23-May-84 12:21:48 by MCLEAN
;FIX THREE PORTED DISKS NOT TO CHECK HOME BLOCKS
; UPD ID= 4193, SNARK:<6.MONITOR>PHYSIO.MAC.118, 9-May-84 12:10:18 by MOSER
;MORE TCO 6.1562 - REMOVE PHYIF AND PHYION USE A FASTER METHOD
; UPD ID= 4189, SNARK:<6.MONITOR>PHYSIO.MAC.117, 8-May-84 23:57:11 by MCLEAN
;MOVE UNIC12 BACK 1 INSTRUCTION
; UPD ID= 4113, SNARK:<6.MONITOR>PHYSIO.MAC.116, 24-Apr-84 11:56:18 by MCLEAN
;PREVENT BUGHLT WHEN SWITCHING FROM CI TO NON-CI DISK
; UPD ID= 4100, SNARK:<6.MONITOR>PHYSIO.MAC.115, 18-Apr-84 19:36:30 by MCLEAN
;ADD PHYMKL TO KILL IORBS FOR CI TAPES
; UPD ID= 4070, SNARK:<6.MONITOR>PHYSIO.MAC.114, 11-Apr-84 19:17:51 by MOSER
;TCO 6.2025 - DON'T REPORT 3-PORTED DISK INFO RETURN DIAGX9
; UPD ID= 4056, SNARK:<6.MONITOR>PHYSIO.MAC.113, 10-Apr-84 07:31:23 by HAUDEL
;TCO 6.2021 - Change a SAVEQ to a SAVEPQ at PHYRWD
; UPD ID= 3977, SNARK:<6.MONITOR>PHYSIO.MAC.112, 26-Mar-84 19:56:44 by GRANT
;In GETSTR, add another check for off-line.
; UPD ID= 3959, SNARK:<6.MONITOR>PHYSIO.MAC.111, 22-Mar-84 06:55:49 by GRANT
;In GETSTR, enhance meaning of dual-ported bit MS%2PT
; UPD ID= 3957, SNARK:<6.MONITOR>PHYSIO.MAC.110, 21-Mar-84 16:41:29 by MCLEAN
;FIX DONIRB FOR VERIFICATION WITH HSC50'S
; UPD ID= 3781, SNARK:<6.MONITOR>PHYSIO.MAC.109, 28-Feb-84 13:15:47 by MOSER
;MORE 6.1562 - CHANGE PHYIOF TO PHYIF
; UPD ID= 3775, SNARK:<6.MONITOR>PHYSIO.MAC.108, 28-Feb-84 10:26:45 by MOSER
;TCO 6.1562 - ALLOW PHYSIO TO BE CALLED (AT SIO1) BY INTERRUPT LEVEL
; ROUTINES. IMPLEMENT IOON AND IOOFF MACROS AND PHYION AND PHYIOF ROUTINES.
; UPD ID= 3699, SNARK:<6.MONITOR>PHYSIO.MAC.107, 18-Feb-84 11:04:00 by PAETZOLD
;TCO 6.1973 - Range check IORB addresses in GIVIRB. Add BADIRB BUGHLT.
; UPD ID= 3645, SNARK:<6.MONITOR>PHYSIO.MAC.106, 2-Feb-84 12:53:04 by MURPHY
;Get rid of useless PHYALZ and what it references.
; UPD ID= 3611, SNARK:<6.MONITOR>PHYSIO.MAC.105, 31-Jan-84 21:37:35 by MCLEAN
;FIX ERRFIN TO GET CORRECT UNIT TYPE
; UPD ID= 3580, SNARK:<6.MONITOR>PHYSIO.MAC.104, 28-Jan-84 16:36:59 by MCLEAN
;MAKE DEVICE NAME NODE INSTEAD OF HSC50 SINCE IT COULD BE A REMOTE SERVER
; UPD ID= 3505, SNARK:<6.MONITOR>PHYSIO.MAC.103, 22-Jan-84 16:25:42 by MCLEAN
;ADD LATEST TPD CHANGES TO PERMIT MASSBUS DISK TO TAKE CONTROL
; UPD ID= 3471, SNARK:<6.MONITOR>PHYSIO.MAC.102, 16-Jan-84 19:24:47 by MCLEAN
;FIX PROBLEM WITH DEVICE CODE 0 FOR SYSERR ENTRY
; UPD ID= 3465, SNARK:<6.MONITOR>PHYSIO.MAC.101, 16-Jan-84 12:54:41 by MCLEAN
;FIX PHYTPD AND FRIENDS
; UPD ID= 3453, SNARK:<6.MONITOR>PHYSIO.MAC.100, 12-Jan-84 20:32:33 by MCLEAN
;FIX BUGS IN CHK11 CODE FOR MULTIPLE UNITS SWITCHED.
; UPD ID= 3423, SNARK:<6.MONITOR>PHYSIO.MAC.99, 8-Jan-84 17:11:26 by MCLEAN
;SET HIGH ORDER SERIAL NUMBER AND USE OF US.TPD
; UPD ID= 3327, SNARK:<6.MONITOR>PHYSIO.MAC.98, 14-Dec-83 23:38:49 by MCLEAN
; INSURE THAT SWITCHING UDB'S FOR CI DISKS MOVES ALL THE STUFF TO
;THE CORRECT UNIT
; UPD ID= 3326, SNARK:<6.MONITOR>PHYSIO.MAC.97, 14-Dec-83 17:43:04 by MOSER
;TCO 6.1562 - ADD CALLS TO MSCP SERVER ONLINE AND OFFLINE
; UPD ID= 3283, SNARK:<6.MONITOR>PHYSIO.MAC.96, 9-Dec-83 23:08:16 by MCLEAN
;LAST EDIT DIDN'T MAKE IT. REMOVE OVRDTA FOR CI
; UPD ID= 3278, SNARK:<6.MONITOR>PHYSIO.MAC.94, 7-Dec-83 19:27:43 by MCLEAN
;FIX UNITRY TO FORGET RETRY FOR NOW ON CI DISKS
; UPD ID= 3274, SNARK:<6.MONITOR>PHYSIO.MAC.93, 7-Dec-83 15:20:42 by MCLEAN
;SOME CLEANUP/REMOVAL OF EXTRANEOUS MSCP STUFF
; UPD ID= 3242, SNARK:<6.MONITOR>PHYSIO.MAC.92, 1-Dec-83 11:11:51 by MCLEAN
;NOIORB BUGHLT FIX FOR HSC50'S DURING POLLING
; UPD ID= 3238, SNARK:<6.MONITOR>PHYSIO.MAC.91, 30-Nov-83 19:46:43 by MCLEAN
;MAKE SPECIAL ENTRY FOR HSC BAT BLOCK ROUTINE IN JOB 0
; UPD ID= 3207, SNARK:<6.MONITOR>PHYSIO.MAC.90, 20-Nov-83 20:07:08 by MCLEAN
;TCO 6.1873 MAKE UNIMES FIND IT'S OWN P1 & P2 SO THAT UNIT SWITCHED
;AND OTHERS DON'T NEED ANYTHING BUT P3
; UPD ID= 3206, SNARK:<6.MONITOR>PHYSIO.MAC.89, 20-Nov-83 19:43:15 by MCLEAN
;ANOTHER EXTENDED ADDRESSING FIX... MOVTAB NEEDS IFIW
; UPD ID= 3202, SNARK:<6.MONITOR>PHYSIO.MAC.88, 19-Nov-83 21:46:40 by MCLEAN
;MAKE PHYDUA SAVE Q REGISTERS ALSO
; UPD ID= 3182, SNARK:<6.MONITOR>PHYSIO.MAC.87, 17-Nov-83 14:06:49 by MCLEAN
;SAVEAC (P1) SHOULD BE SAVEAC <P1>
; UPD ID= 3166, SNARK:<6.MONITOR>PHYSIO.MAC.86, 16-Nov-83 17:02:56 by MCLEAN
;REMOVE ANOTHER S0.ENT
; UPD ID= 3164, SNARK:<6.MONITOR>PHYSIO.MAC.85, 16-Nov-83 14:41:56 by MCLEAN
;RESET TIMER ON OVERDUE HOME BLOCK CHECK AND REMOVE SOME S0.ENT'S
; UPD ID= 3142, SNARK:<6.MONITOR>PHYSIO.MAC.84, 14-Nov-83 14:24:41 by MCLEAN
;NEED TO CHECK FOR UDB IN LATENCY OPTIMIZATION CALL
; UPD ID= 3133, SNARK:<6.MONITOR>PHYSIO.MAC.83, 9-Nov-83 20:18:20 by MCLEAN
;TCO 6.1818 REMOVE RSCOD (SEC0)
; UPD ID= 3129, SNARK:<6.MONITOR>PHYSIO.MAC.82, 9-Nov-83 16:59:13 by MCLEAN
;MORE TCO 1850
; UPD ID= 3124, SNARK:<6.MONITOR>PHYSIO.MAC.81, 9-Nov-83 11:04:58 by MCLEAN
;ADD PORT RELEASE FOR EXPIRED FAIRNESS COUNT
; UPD ID= 3105, SNARK:<6.MONITOR>PHYSIO.MAC.80, 7-Nov-83 13:35:19 by MCLEAN
;TCO 1850 ILTWQP BUGHLT CAUSED BY REMOVAL OF ENTRY WHILE ON PWQ
; UPD ID= 3001, SNARK:<6.MONITOR>PHYSIO.MAC.79, 5-Oct-83 20:13:01 by MCLEAN
;TCO 6.1818 RE-ADJUST CODE FOR SECTION 1 OPERATION
; UPD ID= 2985, SNARK:<6.MONITOR>PHYSIO.MAC.78, 4-Oct-83 16:39:37 by MCLEAN
;TCO 1713 COMMON FILE SUPPORT OF NEW PROBLEM ON DEVICE MESSAGE
; UPD ID= 2939, SNARK:<6.MONITOR>PHYSIO.MAC.77, 27-Sep-83 09:45:14 by GRANT
;In PHYINI, check P4 before updating MAXCHN
; UPD ID= 2812, SNARK:<6.MONITOR>PHYSIO.MAC.76, 9-Aug-83 11:52:03 by MCINTEE
;TCO 6.1762 - Make UNICHK run in section 1 when it calls ELOGOO, PSIRQ, or
; references fork tables.
; UPD ID= 2810, SNARK:<6.MONITOR>PHYSIO.MAC.75, 9-Aug-83 11:47:42 by MURPHY
;TCO 6.1525 - Use RESCD(SEC0) to indicate code must be in section 0.
; UPD ID= 2781, SNARK:<6.MONITOR>PHYSIO.MAC.74, 1-Aug-83 08:31:35 by HAUDEL
;TCO 6.1741 - CHANGE FLAG TESTING AC FROM P1 TO CX AT PHYXF2:
; UPD ID= 2777, SNARK:<6.MONITOR>PHYSIO.MAC.73, 28-Jul-83 14:00:30 by MCLEAN
;MAKE SETUD1 RETURN -1 FOR P3
; UPD ID= 2752, SNARK:<6.MONITOR>PHYSIO.MAC.72, 23-Jul-83 02:10:59 by MCLEAN
;TCO 6.1749 MAKE SETUDB RETURN SOMETHING VALID IN P3 AT SETUD1
; UPD ID= 2659, SNARK:<6.MONITOR>PHYSIO.MAC.71, 3-Jul-83 20:32:44 by MCLEAN
;PREVIOUS FIX WAS UNNECESSARY WE MUST REMOVE CI CODE COMPLETELY AND USE IS.DTE
;TO INICATE BAT BLOCK LOGIC REQUIRED.
; UPD ID= 2637, SNARK:<6.MONITOR>PHYSIO.MAC.70, 26-Jun-83 10:37:04 by MCLEAN
;TCO 6.1706 PERMIT BAT BLOCK LOGIC.
; UPD ID= 2605, SNARK:<6.MONITOR>PHYSIO.MAC.69, 20-Jun-83 16:07:39 by HALL
;TCO 6.1689 - Move fork tables to extended section
; Reference FKJOB via DEFSTR
; UPD ID= 2540, SNARK:<6.MONITOR>PHYSIO.MAC.68, 31-May-83 14:02:19 by MILLER
;TCO 6.1610. Yet more work on PHYUPR and friends
; UPD ID= 2538, SNARK:<6.MONITOR>PHYSIO.MAC.67, 31-May-83 13:05:14 by MURPHY
;TCO 6.1525 - Put S0.ENT at PHYINI.
; UPD ID= 2512, SNARK:<6.MONITOR>PHYSIO.MAC.66, 24-May-83 20:42:50 by MCLEAN
;TCO 6.1665 ADD SECOND WORD TO SERIAL NUMBER FOR HSC
; UPD ID= 2497, SNARK:<6.MONITOR>PHYSIO.MAC.65, 21-May-83 22:10:57 by COBB
;TCO 6.1664 - Use job number when calling ELOGOO:
; UPD ID= 2458, SNARK:<6.MONITOR>PHYSIO.MAC.64, 11-May-83 20:09:06 by MCLEAN
;FIX EXTRANEOUS CALL TO DONIRB
; UPD ID= 2434, SNARK:<6.MONITOR>PHYSIO.MAC.63, 6-May-83 10:16:28 by WACHS
;More TCO 6.1127 - Handle CI disks switching from 1 KDB to another
; UPD ID= 2426, SNARK:<6.MONITOR>PHYSIO.MAC.60, 5-May-83 20:11:21 by MCLEAN
;TCO 6.1645 PREVENT ILLUUO BY CHANGING TO PRIME UNIT AFTER DONIRB CALL
; UPD ID= 2354, SNARK:<6.MONITOR>PHYSIO.MAC.59, 27-Apr-83 07:25:32 by WACHS
;More TCO 6.1127 - Fix NOIORB bughlt for CI disks
; UPD ID= 2345, SNARK:<6.MONITOR>PHYSIO.MAC.58, 26-Apr-83 07:49:09 by WACHS
;More TCO 6.1127 - UNICKT fixup
; UPD ID= 2327, SNARK:<6.MONITOR>PHYSIO.MAC.57, 22-Apr-83 04:28:30 by WACHS
;TCO 6.1620 - Light MS%2PT
; UPD ID= 2272, SNARK:<6.MONITOR>PHYSIO.MAC.56, 13-Apr-83 14:08:40 by MILLER
;TCO 6.1610. More work on PHYMPR and PHYUPR
; UPD ID= 2261, SNARK:<6.MONITOR>PHYSIO.MAC.55, 13-Apr-83 10:45:30 by HAUDEL
;TCO 6.1583 - Add PHYRW1 entry location to the PHYRWD code.
; UPD ID= 2250, SNARK:<6.MONITOR>PHYSIO.MAC.54, 12-Apr-83 19:55:47 by MILLER
;Fix typeo
; UPD ID= 2238, SNARK:<6.MONITOR>PHYSIO.MAC.53, 12-Apr-83 11:53:29 by MILLER
;TCO 6.1610. Add PHYMPR and PHYUPR. Also, check US.DUP at the proper places
; UPD ID= 2204, SNARK:<6.MONITOR>PHYSIO.MAC.52, 8-Apr-83 05:55:43 by WACHS
;TCO 6.1603 - Maintain US.2PT
; UPD ID= 2183, SNARK:<6.MONITOR>PHYSIO.MAC.51, 7-Apr-83 15:20:45 by MILLER
;TCO 6.1589. Use some IOPIOFs in UNICHK to avoid races
; UPD ID= 2180, SNARK:<6.MONITOR>PHYSIO.MAC.50, 6-Apr-83 14:06:46 by MILLER
;TCO 6.1589 again. Fix some races in handling US.OIR and US.OMS
; UPD ID= 2150, SNARK:<6.MONITOR>PHYSIO.MAC.49, 4-Apr-83 14:22:06 by MILLER
;TCO 6.1589 again
; UPD ID= 2145, SNARK:<6.MONITOR>PHYSIO.MAC.48, 4-Apr-83 12:54:54 by MILLER
;TCO 6.1589. Fix operator assistance message
; UPD ID= 2072, SNARK:<6.MONITOR>PHYSIO.MAC.47, 24-Mar-83 09:29:30 by HAUDEL
;More TCO 6.1538 - Edit not completed correctly first time
; UPD ID= 2054, SNARK:<6.MONITOR>PHYSIO.MAC.46, 21-Mar-83 18:06:41 by MURPHY
;GET RID OF OBSOLETE SEARCH PROKL
; UPD ID= 2032, SNARK:<6.MONITOR>PHYSIO.MAC.45, 20-Mar-83 11:46:36 by WEETON
;TCO 6.1559 - Make IOLOCK lock pages in sections other than 0.
; UPD ID= 2004, SNARK:<6.MONITOR>PHYSIO.MAC.44, 16-Mar-83 04:51:41 by WACHS
;More TCO 6.1355
; UPD ID= 2001, SNARK:<6.MONITOR>PHYSIO.MAC.43, 16-Mar-83 03:58:37 by WACHS
;More of TCO 6.1127
; UPD ID= 1981, SNARK:<6.MONITOR>PHYSIO.MAC.42, 11-Mar-83 15:56:48 by HAUDEL
;TCO 6.1538 - Add overdue rewind timer code to the UNICHK section
; UPD ID= 1940, SNARK:<6.MONITOR>PHYSIO.MAC.41, 8-Mar-83 10:46:55 by CDUNN
;More TCO 6.1127 - Change default to include KLIPA support code
; UPD ID= 1903, SNARK:<6.MONITOR>PHYSIO.MAC.40, 2-Mar-83 07:36:03 by MCINTEE
;Fix typo in previous edit
; UPD ID= 1898, SNARK:<6.MONITOR>PHYSIO.MAC.39, 1-Mar-83 15:44:07 by HALL
;TCO 6.1502 - Allow free space outside of section 0
; At least temporarily, make all callers request section 0
; UPD ID= 1892, SNARK:<6.MONITOR>PHYSIO.MAC.38, 1-Mar-83 14:18:24 by MOSER
;TCO 6.1530 - DON'T MONPDL IN CLRSTR IF NO UDB
; UPD ID= 1887, SNARK:<6.MONITOR>PHYSIO.MAC.37, 28-Feb-83 19:40:25 by PAETZOLD
;TCO 6.1529 - Do not trash Q1 in UNIC10 - Remove TCO 6.1515
; UPD ID= 1830, SNARK:<6.MONITOR>PHYSIO.MAC.36, 18-Feb-83 16:53:29 by PAETZOLD
;TCO 6.1515 - PH2DSW switch for debuging PH2PIMs.
; UPD ID= 1762, SNARK:<6.MONITOR>PHYSIO.MAC.35, 4-Feb-83 05:55:25 by WACHS
;More TCO 6.1355
; UPD ID= 1757, SNARK:<6.MONITOR>PHYSIO.MAC.34, 3-Feb-83 13:57:43 by GRANT
;TCO 6.1493 - use UNITS pool rather than GENERAL pool for resident free space
; UPD ID= 1587, SNARK:<6.MONITOR>PHYSIO.MAC.33, 28-Dec-82 07:54:00 by WACHS
;More TCO 6.1355
;MORE TCO 6.1355
; UPD ID= 1439, SNARK:<6.MONITOR>PHYSIO.MAC.31, 12-Nov-82 16:13:14 by PAETZOLD
;Force FTMSCP to zero if not defined- Delete some old edit history
; UPD ID= 1429, SNARK:<6.MONITOR>PHYSIO.MAC.30, 9-Nov-82 04:33:34 by WACHS
;TCO 6.1355 MSCP/KLIPA Mods
; UPD ID= 1222, SNARK:<6.MONITOR>PHYSIO.MAC.29, 23-Sep-82 12:51:20 by CDUNN
;More TCO 6.1198 Make OFFTWQ a global symbol so PHYMSC can get at it
; UPD ID= 1048, SNARK:<6.MONITOR>PHYSIO.MAC.28, 6-Aug-82 14:49:08 by PAETZOLD
;TCO 6.1217 - Count skip reads in DSKRVC
; UPD ID= 1016, SNARK:<6.MONITOR>PHYSIO.MAC.27, 30-Jul-82 04:48:56 by WACHS
;TCO 6.1198 - Mods for CI support
; UPD ID= 907, SNARK:<6.MONITOR>PHYSIO.MAC.26, 9-Jun-82 23:37:41 by MURPHY
;TCO 6.1147 - Move bugdefs from BUGS.MAC to here and put them in-line.
; UPD ID= 772, SNARK:<6.MONITOR>PHYSIO.MAC.25, 20-May-82 07:23:36 by WACHS
;TCO 6.1127 - 1 more CI/KLIPA fix
; UPD ID= 762, SNARK:<6.MONITOR>PHYSIO.MAC.24, 18-May-82 15:47:14 by CDUNN
;TCO 6.1127 - Put references to Jupiter disk and tape under conditionals.
; UPD ID= 736, SNARK:<6.MONITOR>PHYSIO.MAC.21, 12-May-82 02:32:33 by CDUNN
;TCO 6.1126 - Put back the origional edit that REDIT lost
; UPD ID= 724, SNARK:<6.MONITOR>PHYSIO.MAC.19, 11-May-82 04:32:27 by CDUNN
;TCO 6.1127 - More, still yet, add support for CI and KLIPA
; UPD ID= 718, SNARK:<6.MONITOR>PHYSIO.MAC.18, 11-May-82 02:14:33 by CDUNN
;TCO 6.1127 - Keep PHYKLP and PHYMSC happy by making some symbols global
;In particular (CONSTW,OFFPWQ,ONPWQ,ONFTWQ)
; UPD ID= 687, SNARK:<6.MONITOR>PHYSIO.MAC.17, 4-May-82 13:40:00 by CDUNN
;TCO 6.1127 - Add call to initialize CISRV and SCA. Also add defaults setting
;for FTCI to be off.
; UPD ID= 404, SNARK:<6.MONITOR>PHYSIO.MAC.16, 14-Feb-82 01:58:04 by PAETZOLD
;More TCO 6.1010 - Fix up a couple of CSTX index registers
; UPD ID= 396, SNARK:<6.MONITOR>PHYSIO.MAC.15, 11-Feb-82 16:33:27 by PAETZOLD
;TCO 5.1727 - Fix read after write....use ONTWQ and not SIO1 in DONIRB.
; turn off IS.DON when queueing IRFRVC IORB. Give fairness credit to
; unit for IRFRVC function
; UPD ID= 389, SNARK:<6.MONITOR>PHYSIO.MAC.14, 8-Feb-82 10:07:30 by PAETZOLD
;TCO 5.1723 - make sure STRTIO called for head of TWQ in SIO5
; UPD ID= 256, SNARK:<6.MONITOR>PHYSIO.MAC.13, 16-Dec-81 00:28:16 by PAETZOLD
;More TCO 6.1010 - Make sure all CSTX references occur while in section one
; UPD ID= 221, SNARK:<6.MONITOR>PHYSIO.MAC.12, 30-Nov-81 08:42:41 by PAETZOLD
;More TCO 6.1010 - CST3 linked list references
; UPD ID= 177, SNARK:<6.MONITOR>PHYSIO.MAC.11, 31-Oct-81 14:42:44 by PAETZOLD
;More TCO 6.1010 - Move CST3 references
; UPD ID= 171, SNARK:<6.MONITOR>PHYSIO.MAC.10, 29-Oct-81 23:04:02 by PAETZOLD
;TCO 6.1034 - Use S0.ENT before getting new stack in PHYSIO. This
; fixes problem where PHYSIO would return in section zero
; UPD ID= 163, SNARK:<6.MONITOR>PHYSIO.MAC.9, 23-Oct-81 15:35:38 by COBB
; UPD ID= 159, SNARK:<6.MONITOR>PHYSIO.MAC.8, 23-Oct-81 14:44:22 by COBB
; UPD ID= 146, SNARK:<6.MONITOR>PHYSIO.MAC.7, 19-Oct-81 16:19:55 by COBB
;TCO 6.1029 - CHANGE SE1CAL TO EA.ENT
;<6.MONITOR>PHYSIO.MAC.6, 5-Oct-81 14:14:12, EDIT BY MURPHY
;MAKE XINT INTERNAL
; UPD ID= 73, SNARK:<6.MONITOR>PHYSIO.MAC.5, 15-Sep-81 16:04:22 by PAETZOLD
;TCO 6.1010 - Move CSTs to CSTSEC - change non mask cst1 references
; UPD ID= 1851, SNARK:<6.MONITOR>PHYSIO.MAC.4, 21-Apr-81 06:22:12 by WACHS
;TCO 5.1288 ADD STATISTICS LOGGING CODE
; UPD ID= 1599, SNARK:<6.MONITOR>PHYSIO.MAC.3, 27-Feb-81 07:21:40 by WACHS
;TCO 6.1002 ADD CODE FOR DUAL-PORTED DISKS
; UPD ID= 1576, SNARK:<6.MONITOR>PHYSIO.MAC.2, 24-Feb-81 10:13:23 by LYONS
; UPD ID= 1573, SNARK:<5.MONITOR>PHYSIO.MAC.20, 23-Feb-81 16:11:38 by LYONS
;TCO 5.1062 FIX A BUG
; UPD ID= 1506, SNARK:<5.MONITOR>PHYSIO.MAC.19, 28-Jan-81 07:39:23 by WACHS
; UPD ID= 1452, SNARK:<5.MONITOR>PHYSIO.MAC.18, 20-Jan-81 05:44:16 by WACHS
;TCO 5.1234 ADD CODE FOR RETRY OPPOSITE IN MAGTAPE ERROR RECOVERY
; UPD ID= 1390, SNARK:<5.MONITOR>PHYSIO.MAC.17, 31-Dec-80 08:55:18 by WACHS
;TCO 5.1222 - Add code for movement of packs from drive to drive
; UPD ID= 1333, SNARK:<5.MONITOR>PHYSIO.MAC.16, 1-Dec-80 17:39:33 by LYONS
; UPD ID= 987, SNARK:<5.MONITOR>PHYSIO.MAC.15, 4-Sep-80 11:59:10 by LYONS
;FIX DESTRUCTION OF AC IN DONIRB: BY TCO 5.1062
; UPD ID= 958, SNARK:<5.MONITOR>PHYSIO.MAC.14, 25-Aug-80 15:10:00 by LYONS
; UPD ID= 956, SNARK:<5.MONITOR>PHYSIO.MAC.13, 25-Aug-80 14:44:03 by LYONS
;TCO 5.1062 - move error checking , and see if there was an error on
; a write verification, before we post the read
; UPD ID= 954, SNARK:<5.MONITOR>PHYSIO.MAC.12, 22-Aug-80 16:36:30 by LYONS
;MORE TCO 5.1062 - Make IORB modification code a little more paranoid about
;changeing a long IORB by mistake.
; UPD ID= 933, SNARK:<5.MONITOR>PHYSIO.MAC.11, 20-Aug-80 15:00:28 by LYONS
;TCO 5.1062 - Write verification stuff
; UPD ID= 735, SNARK:<5.MONITOR>PHYSIO.MAC.10, 7-Jul-80 00:47:13 by DBELL
;TCO 5.1096 - HAVE UNICHK LOOK FOR HALTED MICROCODE IN CONTROLLERS
; UPD ID= 685, SNARK:<5.MONITOR>PHYSIO.MAC.9, 22-Jun-80 12:19:58 by DBELL
;TCO 5.1065 - COMPLAIN ABOUT WRITE-LOCKED DISKS
; UPD ID= 679, SNARK:<5.MONITOR>PHYSIO.MAC.8, 19-Jun-80 16:32:02 by DBELL
;TCO 5.1071 - STORE CONTROLLER AND UNIT NUMBERS IN SYSERR BLOCKS
;TCO 5.1066 - GIVE IORB FUNCTION IN OVRDTA BUGCHK
;MAKE CLRACT GLOBAL, CLEAR US.WLK FOR DISKS ONCE A MINUTE IN UNITRY ROUTINE
; UPD ID= 616, SNARK:<5.MONITOR>PHYSIO.MAC.5, 8-Jun-80 15:52:07 by DBELL
;DON'T LET UDSKIO/MDSKIO DO TRANSFERS ACROSS CYLINDER BOUNDARIES
; UPD ID= 576, SNARK:<5.MONITOR>PHYSIO.MAC.4, 31-May-80 22:59:31 by DBELL
;TCO 5.1053 - DON'T GIVE FATAL ERROR FOR HUNG IORBS DOING SEEKS
;TCO 5.1048 - ADD ROUTINES TO ALLOW MULTIPLE-PAGE DISK I/O TO WORK
; UPD ID= 481, SNARK:<4.1.MONITOR>PHYSIO.MAC.30, 26-Apr-80 11:45:15 by DBELL
;CLEAN UP CODE LOTS BY USING TXNN AND MOVX MACROS EVERYWHERE
;TCO 4.1.1149 - MAKE HNGIRB ROUTINE KNOW ABOUT DISK CONTROLLERS
; UPD ID= 397, SNARK:<4.1.MONITOR>PHYSIO.MAC.29, 2-Apr-80 13:27:42 by DBELL
;MOVE INSTRUCTION AT PHYKIL DOWN TO PREVENT ILMNRF
; UPD ID= 366, SNARK:<4.1.MONITOR>PHYSIO.MAC.28, 26-Mar-80 11:07:44 by DBELL
;TCO 4.1.1119 - ADD LOTS OF CODE TO SUPPORT RP20 DISKS
; UPD ID= 215, SNARK:<4.1.MONITOR>PHYSIO.MAC.27, 23-Jan-80 09:19:39 by SCHMITT
;TCO 4.1.1071 - If fairness cnt exhsted at SEK1+5, chk for minimum cyl
;<4.1.MONITOR>PHYSIO.MAC.26, 10-Nov-79 11:08:37, EDIT BY DBELL
;TCO 4.1.1012 - TEST US.ACT CORRECTLY AT CHK6+3
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976, 1990.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SEARCH PROLOG,PHYPAR,SERCOD,SCAPAR
IFNDEF FTKLIPA,<FTKLIPA==:-1> ;Default is include KLIPA support code
IFNDEF FTMSCP,<FTMSCP==:0> ;Default is no MSCP either
TTITLE(PHYSIO,,< - Device Independent Physical IO>)
SUBTTL L.BOSACK 17-MAY-75
RESCD ;RESIDENT CODE IN SECTION 0
Subttl Table of Contents
; Table of Contents for PHYSIO
;
; Section Page
;
;
; 1. Parameters . . . . . . . . . . . . . . . . . . . . . . 4
; 2. Initialization . . . . . . . . . . . . . . . . . . . . 7
; 3. Initialize a UDB . . . . . . . . . . . . . . . . . . . 8
; 4. Dual Port Initialization . . . . . . . . . . . . . . . 9
; 5. Check Unit Existance . . . . . . . . . . . . . . . . . 13
; 6. Find CKU Numbers . . . . . . . . . . . . . . . . . . . 14
; 7. Allocate Resident Storage . . . . . . . . . . . . . . 15
; 8. Restart . . . . . . . . . . . . . . . . . . . . . . . 16
; 9. Online/Offline Interrupt . . . . . . . . . . . . . . . 17
; 10. Interrupt Handler . . . . . . . . . . . . . . . . . . 18
; 11. Position Done . . . . . . . . . . . . . . . . . . . . 31
; 12. Utilities . . . . . . . . . . . . . . . . . . . . . . 33
; 13. Statistics Logging Interface . . . . . . . . . . . . . 54
; 14. Internal Start IO Utilities . . . . . . . . . . . . . 56
; 15. Seek Scheduler . . . . . . . . . . . . . . . . . . . . 64
; 16. Channel Scheduler . . . . . . . . . . . . . . . . . . 68
; 17. Routines To Lock And Unlock IO Pages . . . . . . . . . 74
; 18. UDSKIO and MDSKIO . . . . . . . . . . . . . . . . . . 78
; 19. PAGEM Interface . . . . . . . . . . . . . . . . . . . 86
; 20. Operator Intervention, Restart and Timeout . . . . . . 88
; 21. Homeblock and PDB Routines . . . . . . . . . . . . . . 106
; 22. Error Recovery . . . . . . . . . . . . . . . . . . . . 125
; 23. Mountable Structure Support Routines . . . . . . . . . 131
; 24. Subroutines . . . . . . . . . . . . . . . . . . . . . 134
; 25. End of PHYSIO . . . . . . . . . . . . . . . . . . . . 141
SUBTTL Parameters
;LATENCY OPTIMIZATION PARAMETERS
MINLAT==^D2700 ;2.7MS SAFETY FACTOR
INIFCX==^D40 ;INITIAL FAIRNESS COUNT FOR XFRS
;DO A ROUND ROBIN CHANNEL SCHEDULE CYCLE
;EVERY INFCX TRANSFERS. WHEN A CHANNEL GOES
;IDLE, RESET THE COUNT.
INIFCP==^D40 ;INITIAL FAIRNESS COUNT FOR POSITIONING
;AT MOST INIFCP TRANSFERS WILL BE APPENDED
;TO THE END OF A UNITS TRANSFER QUEUE IF
;THERE ARE REQUESTS TO OTHER CYLINDERS
INIFCR==^D15 ;INITIAL FAIRNESS COUNT FOR READ SEEK PREFERENCE
;FOR INIFCR SEEK SCHEDULE CYCLES READS WILL
;BE ABSOLUTLY PREFERABLE TO WRITES
;GLOBAL BYTE POINTERS
IRYFCN::POINT ISSFCN,IRBSTS(P4),ISPFCN ;IORB FUNCTION CODE
IRYMOD::POINT IMSMOD,IRBMOD(P4),IMPMOD ;IORB MODE
USYTYP::POINT USSTYP,UDBSTS(P3),USPTYP ;UNIT TYPE
CSYTYP::POINT CSSTYP,CDBSTS(P1),CSPTYP ;CHANNEL TYPE
CSYPIA::POINT CSSPIA,CDBSTS(P1),CSPPIA ;PI ASSIGNMENT
USYBKT::POINT XSSTYP,UDBSTS(P3),XSPTYP ;BLOCK TYPE FROM P3
;TABLE OF BYTES PER WORD AS A FUNCTION OF MODE
MODTAB::EXP -1 ;ILLEGAL
EXP 1 ;WORD MODE
EXP 6 ;6 BIT MODE
EXP 5 ;7 BIT MODE
EXP 4 ;8 BIT MODE
EXP 1 ;HIGH DENSITY MODE
;TABLE OF UNIT TYPES USABLE BY THE FILESYSTEM
;NOTE: WHEN ADDING AN ENTRY TO THIS TABLE, BE SURE TO ADD A CORRESPONDING
;ENTRY IN DSKSIZ TO INDICATE THE SIZE OF THE DISK
DSKUTP::EXP .UTRP4 ;RP04
EXP .UTRP5 ;RP05
EXP .UTRP6 ;RP06
EXP .UTRP7 ;RP07
EXP .UTRM3 ;RM03
EXP .UTP20 ;RP20
EXP .UTR80 ;RA80
EXP .UTR81 ;RA81
EXP .UTR60 ;RA60
EXP .UTR82 ;RA82 (FUTURE)
EXP .UTR62 ;RA62 (FUTURE)
NDSKUT==:.-DSKUTP
;TABLE OF POINTER TO UNIT PHYSICAL SIZE PARAMETERS - THE TABLES ARE
;DEFINED IN STG
DSKSIZ::DSKSZ0 ;RP04
DSKSZ0 ;RP05
DSKSZ1 ;RP06
DSKSZ2 ;RP07
DSKSZ3 ;RM03
DSKSZ4 ;RP20
DSKSZ5 ;RA80
DSKSZ6 ;RA81
DSKSZ7 ;RA60
DSKSZ8 ;RA82 (FUTURE)
DSKSZ9 ;RA62 (FUTURE)
;TABLE OF UNIT TYPE NAMES
NAMUTP::POINT 7,[ASCIZ /(ILLEGAL TYPE:0)/]
POINT 7,[ASCIZ /RP04/]
POINT 7,[ASCIZ /RS04/]
POINT 7,[ASCIZ /TU45/]
POINT 7,[ASCIZ /TM02/]
POINT 7,[ASCIZ /RP05/]
POINT 7,[ASCIZ /RP06/]
POINT 7,[ASCIZ /RP07/]
POINT 7,[ASCIZ /RP08/]
POINT 7,[ASCIZ /RM03/]
POINT 7,[ASCIZ /TM03/]
POINT 7,[ASCIZ /TU77/]
POINT 7,[ASCIZ /TM78/]
POINT 7,[ASCIZ /TU78/]
POINT 7,[ASCIZ /DX20A/]
POINT 7,[ASCIZ /TU70/]
POINT 7,[ASCIZ /TU71/]
POINT 7,[ASCIZ /TU72/]
POINT 7,[ASCIZ /TU73/]
POINT 7,[ASCIZ /DX20B/]
POINT 7,[ASCIZ /RP20/]
POINT 7,[ASCIZ /CI PORT/]
POINT 7,[ASCIZ /NODE/]
POINT 7,[ASCIZ /RA80/]
POINT 7,[ASCIZ /RA81/]
POINT 7,[ASCIZ /RA60/]
POINT 7,[ASCIZ /RA82/]
POINT 7,[ASCIZ /RA62/]
MSGLIM==.RTJST(-1,US.RTY) ;Min retry for operator assistance messages
SUBTTL Initialization
;WIPES THE ACCUMULATORS
PHYINI::MOVSI Q1,PHYCHL ;GET LENGTH OF CHANNEL SERVICE TABLE
MOVEI P4,0 ;FIRST FREE SLOT IN CHANTAB
PHYIN2: HRRZ T1,PHYCHT(Q1) ;GET DISPATCH ADDRESS
PUSH P,Q1 ;SAVE OVER CALL
CALL CDSINI(T1) ;CALL TO INITIALIZE ALL CHANNELS OF THIS TYPE
POP P,Q1 ;RESTORE AOBJN POINTER
CAMLE P4,MAXCHN ;A NEW MAXIMUM CHANNEL IN USE?
MOVEM P4,MAXCHN ;YES
AOBJN Q1,PHYIN2 ;LOOP FOR ALL TYPES LOADED
MOVEI T1,UIOLEN*<NUIORB-1>+UDIORB ;INITIALIZE IORB FREE LIST
SETZM (T1) ;CLEAR END OF LIST
PHYIN3: CAIN T1,UDIORB ;DONE?
JRST PHYIN4 ;YES
MOVE T2,T1 ;NO - SAVE SUCCESSOR
SUBI T1,UIOLEN ;MOVE BACKWARD IN LIST
MOVEM T2,(T1) ;STORE FOREWARD POINTER
JRST PHYIN3
PHYIN4: MOVEM T1,UIOLST ;STORE HEAD OF LIST
SETOM DIAGLK ;INITIALIZE LOCK TO FREE
RET
SUBTTL Initialize a UDB
;UTILITY TO SET UP AND INITIALIZE A UDB
;T3/ DISPATCH ADDRESS,,LENGTH OF UDB
;Q2/ UNIT NUMBER
;P1/ CDB
;RETURNS +1(ON FAILURE):
;RETURNS +2 (SUCCESS)
;P3/ UDB ADDRESS
PHYUDB::HRRZ T1,T3 ;LENGTH OF UDB
PUSHJ P,PHYALC ;ALLOCATE STORAGE
RET ;NONE FOUND
MOVE P3,T1 ;UDB POINTER TO P3
HLRZ T1,T3 ;DISPATCH ADDRESS
MOVEM T1,UDBDSP(P3) ;SET UP IN UDB
MOVEI T1,.BTUDB ;MARK AS UDB
DPB T1,USYBKT ; ...
HRRZM P1,UDBCDB(P3) ;SET UP CDB ADDRESS
HRRZM Q2,UDBADR(P3) ;THIS UNITS ADDRESS ON CHANNEL
HRL Q2,P1 ;CDB,,UNIT #
MOVEM Q2,UDBAKA(P3) ;AKA TEMPORARY SETUP
HRRZ Q2,Q2 ;RESTORE Q2
MOVSI T1,UDBPWQ(P3) ;MAKE EMPTY QUEUES
MOVEM T1,UDBPWQ(P3) ;POSITION WAIT QUEUE
MOVSI T1,UDBTWQ(P3)
MOVEM T1,UDBTWQ(P3) ;TRANSFER WAIT QUEUE
MOVEI T1,-1 ;SET POSITIONS TO UNKNOWN
MOVEM T1,UDBPS1(P3) ; ...
MOVEM T1,UDBPS2(P3) ; ...
SETOM UDBSTR(P3) ;NOT ASSIGNED TO A STRUCTURE
RETSKP
SUBTTL Dual Port Initialization
;PHYDUA - Look for a dual-ported drive, based on drive's serial number. If one
;is found, set up UDB2ND or UDBALT accordingly. If both ports are connected
;via CI, then set up UDBALT in both UDBs to point to the other UDB. If both
;ports are MASSBUS disks, set up UDB2ND on the two UDBs such that the primary
;UDB has "0,,secUDB" and the secondary has "-1,,priUDB". [7.1148] We will try
;to set the primary UDB as the odd RH20 if the drive is odd and even RH20 if
;the drive is even. If one path is thru the CI and the other is thru the
;MASSBUS, then the CI path is marked as TPD and is never used.
;
; P3/ UDB
; CALL PHYDUA ;(P3/)
;RETURNS +1
PHYDUA::SAVEPQ ;SAVE ACS
HRRZ P5,P3 ;SAVE TARGET UDB
MOVSI P6,-CHNN ;PREPARE TO LOOK AT ALL CHANNELS
PHYDU1: SKIPN P1,CHNTAB(P6) ;CHAN EXIST?
JRST PHYDU2 ;NO, TRY NEXT
CALL DGUMAP ;YES, LOOK AT ALL UNITS
CALL PHYDU3 ; LOOKING FOR A MATCHING SERIAL NUMBER
PHYDU2: AOBJN P6,PHYDU1 ;KEEP GOING FOR ALL CHANS
RET
;CALLED FOR EACH UNIT ON A CHAN
PHYDU3: MOVX T1,US.TPD ;CHECK TO SEE IF DISABLED
TDNE T1,UDBSTS(P3)
RET ;YES DON'T WANT TO MATCH THIS ONE
SKIPE T1,UDBDSN(P3) ;NON-0 SERIAL NUMBER?
CAIN P5,(P3) ;YES, DONT TRY TO MATCH OURSELVES
RET ;TESTING OUR UNIT, OR NO SERIAL NUMBER - NO MATCH
MOVE T2,UDBDSH(P3) ;GET HIGH SERIAL NUMBER
CAMN T2,UDBDSH(P5) ;MATCH?
CAME T1,UDBDSN(P5) ;YES, DOES IT MATCH TARGET SERIAL NUMBER?
RET ;WRONG TYPE OR NO MATCH
MOVE T1,CDBSTS(P1) ;CHAN STATUS
TXNN T1,CS.CIP ;CI PORT?
JRST PHYDU4 ;NO
MOVE T1,UDBCDB(P5) ;CHECK OLD TYPE
MOVE T1,CDBSTS(T1) ;CHECK FOR CI DISK
TXNN T1,CS.CIP ;IS IT CI?
JRST PHYBYE ;NO PUT IT OFFLINE
;Here with two CI paths to a disk, set up UDBALT accordingly.
SETZB P6,Q3 ;FOUND OUR MATCH DON'T NEED TO SEARCH ANY MORE
HRRZM P5,UDBALT(P3) ;YES. SET UP UDBALT IN EACH UDB
HRRZM P3,UDBALT(P5) ; POINTING AT THE OTHER UDB
LDB T1,USYTYP ;GET TYPE OF ONE OF THE DRIVES
CAIL T1,.UTNOD ;IS IT A NODE?
RET
JRST PHYBYE ;THREE PORTED THRU SERVER NO-NO
;Here if dual ported MASSBUS based disk. If the alternate path is
;through the CI, then we only use the MASSBUS path.
PHYDU4: MOVE T1,UDBCDB(P5) ;GET THE OLD TYPE
MOVE T1,CDBSTS(T1)
TXNE T1,CS.CIP ;IS IT NON-CI?
JRST PHYBHC ;YES PUT IT OFFLINE
;[7.1148] If we are starting up the system, we attempt to put the odd numbered
;[7.1148] drives on the odd numbered channel and the even numbered drives on
;[7.1148] the even numbered channels. If the operator changes the port from
;[7.1148] dual ported to single ported, we make the single ported path the
;[7.1148] primary and leave the secondary offline.
;[7.1148] If UDB2ND is zero there is no alternate path. If UDB2ND is 0,,udb
;[7.1148] then this UDB is the primary UDB. If UDB2ND is -1,,udb then this is
;[7.1148] the secondary (alternate) UDB.
SETZB P6,Q3 ;FOUND OUR MATCH, DON'T NEED TO SEARCH ANY MORE
MOVX T4,US.2PT ;[7.1148] Since both ports are on this system
ANDCAM T4,UDBSTS(P5) ;[7.1148] it isn't multi-access
ANDCAB T4,UDBSTS(P3) ;[7.1148] Get the other UDB's status in T4
SKIPN UDB2ND(P3) ;[7.1148] Operator switching primary/secondary?
TXNE T4,US.OFS ;[7.1148] Is the other UDB offline?
IFSKP. ;[7.1148] No, both are online or not switching
CALL FNDCKU ;[7.1148] (P1,P2,P3/T1,T2,T3) Get CKU numbers
XOR T1,T3 ;[7.1148] See if b35 of chan equals b35 of unit
TRNE T1,1 ;[7.1148] Odd on odd or even on even?
ANSKP. ;[7.1148] P5 points to the alternate then
HRROM P3,UDB2ND(P5) ;[7.1148] Set this UDB alternate = -1,,prime
HRRZM P5,UDB2ND(P3) ;[7.1148] Set other UDB prime = 0,,alternate
RET ;[7.1148] and then return
ENDIF. ;[7.1148] Otherwise this is the primary UDB
HRROM P5,UDB2ND(P3) ;[7.1148] Set other UDB to be alternate
HRRZM P3,UDB2ND(P5) ;[7.1148] and this UDB to be prime
RET
;Here if "triple" ported disk, put this UDB (and any alternate) offline.
PHYBHC: HRRZ T2,UDBALT(P5) ;[7.1148] An alternate?
JUMPE T2,PHYBYE ;[7.1148] No
MOVX T1,US.TPD ;[7.1148] Load the bit
IORM T1,UDBSTS(T2) ;[7.1148] Set alternate offline too
PHYBYE: MOVX T1,US.TPD ;SET THREE PORT OFFLINE
IORM T1,UDBSTS(P5) ;GONE FOREVER
SKIPE CIBUGX ;[7402]UNDER CIBUGX CONDITIONAL
BUG.(INF,PHYCPI,PHYSIO,HARD,<CI path ignored for Massbus disk>,<<P3,OUDB>,<P5,NUDB>>,<
Cause: TOPS-20 is able to access a disk over the CI (through another system's
MSCP server) but it already has had access to the disk via the MASSBUS.
The system ignores the CI path.
Action: No action is required. The purpose of the BUGINF is to let you know
that the system does not use the CI path to the disk even if the
MASSBUS path is disabled.
If you were to reboot the system after disabling the MASSBUS path,
then TOPS-20 would see the disk through an MSCP server only and
would use that path for access.
Data: OUDB - Old UDB (path)
NUDB - New UDB (path) marked offline
>,,<DB%NND>) ;[7.1210][7.1148]
MOVX T1,US.CHB!US.OIR!US.OMS ;NO MESSAGES
ANDCAM T1,UDBSTS(P5)
RET ;RETURN TO LOOP
;SETDSN - SET DRIVE SERIAL NUMBER
; T1/ HIGH-ORDER WORD
; T2/ LOW-ORDER WORD
; P3/ UDB
; CALL SETDSN ;(T1,T2,P3/)
; RETURN +1
SETDSN::CAMN T1,UDBDSH(P3) ;HAS DSN
CAME T2,UDBDSN(P3) ; CHANGED?
IFNSK.
SAVEAC <Q1,Q2> ;YES
DMOVE Q1,UDBDSH(P3) ;PRESERVE OLD DSN
DMOVEM T1,UDBDSH(P3) ;SET NEW DSN
DMOVE T1,Q1 ;RETRIEVE OLD DSN
IOR T1,T2 ;WAS THERE ONE
JUMPE T1,R ;[8980] Return now if none was there
DMOVE T1,Q1 ;YES, RETRIEVE OLD AGAIN
CALL CFSDSN ;(T1,T2,P3/) TELL CFS ABOUT THE CHANGE
ENDIF.
RET
SUBTTL Check Unit Existance
;ROUTINE TO CHECK FOR THE LEGALITY AND EXISTANCE OF A PARTICULAR
;UNIT ON A CHANNEL. THIS ROUTINE HANDLES ALMOST ALL CASES, WHERE
;CONTROLLERS AND UNITS RANGE FROM 0-7, AND ARE REFERENCED AS OFFSETS
;INTO UDB TABLES. ANY EXCEPTIONS (SUCH AS THE DX20) WILL HAVE THEIR
;OWN ROUTINES. USED BY THE .DGPDL FUNCTION OF DIAG. ARGUMENTS:
; P1/ CDB
; P2/ KDB (ONLY FOR EXTUDB CALL)
; P5/ CONTROLLER NUMBER OR -1 IF NONE (ONLY FOR EXTKDB CALL)
; Q2/ UNIT NUMBER
;RETURNS:
; +1: T1/ 0 UNIT OR CONTROLLER IS ILLEGAL
; T1/ -1 UNIT OR CONTROLLER IS NONEXISTANT
; +2: CONTROLLER AND UNIT EXIST
;TRASHES T1. P2 AND P3 ARE SET TO THE KDB AND UDB AS THEY ARE FOUND.
EXTKDB::JUMPL P5,EXTUD2 ;DIFFERENT IF NO CONTROLLER
CAILE P5,7 ;CAN HAVE ONLY 8 UNITS
JRST RFALSE ;ILLEGAL
MOVE T1,CDBIUN(P1) ;GET ADDRESS OF KDB POINTERS
ADD T1,P5 ;ADD KDB UNIT
SKIPN P2,(T1) ;KDB EXIST?
JRST RTRUE ;NO
MOVE P3,P2 ;COPY FOR CHECK
LDB T1,USYBKT ;GET BLOCK TYPE
CAIE T1,.BTKDB ;MAKE SURE IT IS A KDB
JRST RTRUE ;NO, ERROR
MOVE T1,KDBDSP(P2) ;GET DISPATCH ADDRESS
JRST UDSEXT(T1) ;ASK CONTROLLER ABOUT THE UNIT
EXTUD2: SKIPA P3,[ADD T1,CDBIUN(P1)] ;INSTRUCTION FOR NO CONTROLLER
EXTUDB::SKIPA P3,[ADD T1,KDBIUN(P2)] ;OR INSTRUCTION FOR CONTROLLER
SETZ P2, ;FLAG NONEXISTANCE OF CONTROLLER
SKIPL T1,Q2 ;CHECK UNIT VALIDITY
CAILE T1,7 ;ONLY CAN HAVE 8 UNITS
JRST RFALSE ;ILLEGAL
XCT P3 ;ADD IN ADDRESS OF UNIT TABLE
SKIPN P3,(T1) ;SEE IF UDB EXISTS
JRST RTRUE ;NO
LDB T1,USYBKT ;GET BLOCK TYPE
CAIE T1,.BTUDB ;MAKE SURE IT IS A UDB
JRST RTRUE ;NOPE
RETSKP ;YES, SKIP RETURN
SUBTTL Find CKU Numbers
;SUBROUTINE TO FIND THE CORRECT CHANNEL, CONTROLLER, AND UNIT NUMBERS
;GIVEN THE CDB, KDB, AND UDB ADDRESSES. USED BY VARIOUS BUGCHKS, ETC.
;THE NORMAL ENTRY IS FNDCKU - FNDCKS IS USED FOR "RELATIVE" UNIT NUMBERING
;THAT IS THE UNIT IS NUMBERED CORRESPONDING TO IT'S OFFSET IN THE TABLE RATHER
;THAN IT'S REAL UNIT NUMBER.
;CALL:
; P1/ CDB
; P2/ KDB, OR 0 IF NONE
; P3/ UDB
;RETURNS +1 ALWAYS:
; T1/ CHANNEL NUMBER
; T2/ CONTROLLER NUMBER OR -1 IF NONE
; T3/ UNIT NUMBER
FNDCKS::CALL FNDCKU ;GET C K AND ABSOLUTE U
TRNN P2,-1 ;REALLY A K?
RET ;NO ALL DONE
MOVE T3,KDBIUN(P2) ;GET AOBJN WORD
FNDCS0: CAMN P3,0(T3) ;[8980] Find it?
IFSKP. ;[8980] Not a match
AOBJN T3,FNDCS0 ;NO KEEP LOOPING
BUG.(HLT,PHYNUN,PHYSIO,SOFT,<PHYSIO - No unit number found in FNDCKS>,<<T1,CHAN>,<T2,KONT>,<P3,UDB>>,<
Cause: A unit number could not be found for a given CDB, KDB, UDB in FNDCKS.
This indicates a software problem. P3 may not contain a valid UDB.
Data: CHAN - Channel number
KONT - Controller number
UDB - UDB address
>)
ENDIF.
HRRZS T3
SUBI T3,KDBUDB(P2) ;RELATIVE TO KDBUDB
RET
FNDCKU::HRRZ T1,CDBADR(P1) ;GET CHANNEL NUMBER
SETO T2, ;ASSUME NO CONTROLLER
HRRZ T3,UDBAKA(P3) ;GET UNIT IF NO CONTROLLER
TRNN P2,-1 ;GUESSED RIGHT?
RET ;YES, DONE
MOVE T2,T3 ;NOPE, GET CONTROLLER NUMBER
HRRZ T3,UDBSLV(P3) ;AND UNIT OF IT
RET ;NOW DONE
SUBTTL Allocate Resident Storage
;ALLOCATORS FOR USE DURING INITIALIZATION ONLY
;ALLOCATE RESIDENT STORAGE
;T1/ LENGTH OF BLOCK IN WORDS, ASSUMED LESS THAN PGSIZ
; CALL PHYALC
;RETURNS+1: ON FAILURE,
;RETRUNS+2: SUCCESS,
;T1/ ADDRESS OF START OF BLOCK
;PRESERVES T3,T4
PHYALC::JUMPLE T1,INIERR ;CHECK ARG
SAVEAC <T3,T4,Q1> ;PRESERVE USEFUL REGISTERS
SKIPA Q1,T1 ;SAVE LENGTH
PHYALL: MOVE T1,Q1 ;GET LENGTH
HRLI T1,.RESP1 ;PRIORITY
MOVX T2,RS%SE0!.RESUP ;UNITS POOL, SECTION 0
CALL ASGRES ;GET STG
JRST [ BUG.(INF,PHYICE,PHYSIO,SOFT,<PHYINI - Failed to assign resident STG>,,<
Cause: The routine PHYALC was called to allocate storage for data such as a
CDB, KDB, or UDB, but there was not enough free resident storage to
allocate it. The monitor ignores any device for which it cannot
build tables.
Action: The monitor can be rebuilt with a larger units pool by adding to symbol
.RESUQ in STG and rebuilding the monitor.
>)
RET]
MOVE T4,T1 ;GET ADDRESS
MOVE T3,T1 ;IN 2 PLACES
ADD T3,Q1 ;SEE IF IT IS GREATER THAN A PAGE
ANDI T4,777000
ANDI T3,777000
CAME T4,T3 ;IF THE SAME THEN OK
JRST PHYALL ;LOSE IT FOR NOW
RETSKP
;HERE WHEN GIVEN AN ILLEGAL ARGUMENT TO ALC
INIERR: BUG.(HLT,PHYICA,PHYSIO,SOFT,<PHYINI - Illegal argument to core alloc>,,<
Cause: The routine PHYALC was called asking for a negative number of words.
This routine is called to allocate resident storage for data such as
CDBs, KDBs, and UDBs.
>)
SUBTTL Restart
;RESTART ENTRY
;ENTERED WITH PI OFF, STACK IN P, ALL ACCUMULATORS FREE.
PHYRST::MOVSI Q3,-CHNN ;BUILD AOBJN POINTER
RST1: SKIPN P1,CHNTAB(Q3) ;CHANNEL PRESENT?
JRST RST2 ;NO
PUSH P,Q3 ;SAVE CHANNEL COUNTER
CALL DGUMAP ;FOR ALL UNITS ON THIS CHANNEL
CALL ABTREQ ;ABORT REQUESTS
POP P,Q3 ;RESTORE CHANNEL COUNTER
MOVX T1,CS.ACT!CS.MAI!CS.ERC ;CLEAR STATE BITS
ANDCAM T1,CDBSTS(P1) ; ...
MOVEI T1,1 ;INDICATE FULL RESET
HRRZ T2,CDBDSP(P1) ;GET CHANNEL DISPATCH
CALL CDSRST(T2) ;RESET HARDWARE
RST2: AOBJN Q3,RST1 ;LOOP FOR ALL CHANNELS
CALLRET MTCLVA ;CLEAR ALL VALID VOLUME BITS FOR MT'S
;HERE TO ABORT THE REQUESTS ON A PARTICULAR UNIT
ABTREQ: HRRZ P4,UDBTWQ(P3) ;ANY TRANSFER REQUESTS?
JUMPE P4,ABT1 ;NO MORE
CALL OFFTWQ ;PULL FROM TWQ
CALL ABT3 ;POST DONE IF NEEDED
JRST ABTREQ ;LOOP FOR MORE
ABT1: HRRZ P4,UDBPWQ(P3) ;ANY POSITION REQUEST?
JUMPE P4,ABT2 ;NO MORE
CALL OFFPWQ ;REMOVE FROM PWQ
CALL ABT3 ;AND POST COMPLETE IF NEEDED
JRST ABT1 ;LOOP FOR MORE
ABT2: MOVX T1,US.BLK!US.REW!US.ORC!US.OIR!US.OMS ;THINGS TO RESET ABOVE
ANDCAM T1,UDBSTS(P3) ;WHAT CLRACT RESETS
MOVX T1,US.PSI ;SET PSI REQUEST
IORM T1,UDBSTS(P3)
CALLRET CLRACT ;RESET UDB
ABT3: MOVX T1,IS.SHT ;PAGEM REQUEST?
TDNE T1,IRBSTS(P4) ;?
RET ;YES, IGNORE
MOVX T1,IS.ERR!IS.NRT ;INDICATE ERROR
IORM T1,IRBSTS(P4) ; ..
CALLRET DONIRB ;POST COMPLETE
;DONE WITH THIS REQUEST
SUBTTL Online/Offline Interrupt
;ONLINE ENTRY - ENTERED ON THE ONLINE INTERRUPT OF A UNIT
PHYONL::MOVX T1,US.TPD ;CHECK FOR THREE PORTED DISK
TDNE T1,UDBSTS(P3)
RET ;CAN'T ONLINE THREE PORTED DISKS NO MATTER WHAT!
MOVX T1,US.OFS ;CLEAR OFFLINE AND UNSAFE BITS
ANDCAM T1,UDBSTS(P3) ; ...
MOVX T1,US.PSI ;SET PSI REQUEST
IORM T1,UDBSTS(P3)
CALLRET MSSONL ;TELL MSCP SERVER AND DONE
;OFFLINE ENTRY - ENTERED ON THE OFFLINE INTERRUPT OF A UNIT
PHYOFL::MOVX T1,US.PSI!US.OFS ;GET OFFLINE AND PSI FLAGS
IORB T1,UDBSTS(P3) ;STORE THEM AND GET OTHER BITS
TXNN T1,US.TAP ;IS THIS A TAPE?
CALLRET MSSOFL ;NO, TELL MSCP SERVER AND RETURN
CALLRET MTCLVL ;CLEAR VALID VOLUME FOR THIS TAPE
;HERE ON REWIND DONE.
PHYRWD::SAVEPQ ;SAVE ALL Q'S AND P'S
MOVX T1,US.REW!US.ORC ;NO LONGER REWINDING
ANDCAM T1,UDBSTS(P3)
MOVX T1,US.PSI!US.BOT ;SET POSSIBLE PSI FOR REWIND DONE,
IORM T1,UDBSTS(P3) ; AND TELL THE WORLD IT IS AT BOT
PHYRW1::IOPIOF ; INTERLOCKED
CALL SCHSEK ;START ANY POSITION OPS
MOVX T1,CS.ACT!CS.ERC ;GET FLAGS READY
TDNN T1,CDBSTS(P1) ;CHANNEL ACTIVE?
CALL SCHXFR ;NO, START CHANNEL
JRST ONRET ;AND RETURN
SUBTTL Interrupt Handler
;HERE WHEN THE INTERRUPTING DEVICE HAS BEEN DETERMINED
;ENTERED WITH CDB IN P1, P1 SAVED IN CDBSVQ
PHYINT::MOVEM 17,PHYACS+17 ;SAVE HIGH ACCUMULATOR
MOVEI 17,PHYACS ;SETUP BLT POINTER
BLT 17,PHYACS+16 ;SAVE REMAINING ACCUMULATORS
MOVE T1,CDBSVQ(P1) ;COPY P1 FROM WHERE SAVED
MOVEM T1,PHYACS+P1 ;STORE WITH REST
MOVE P,[IOWD LPHIPD,PHYIPD] ;GET INTERRUPT PDL
HRRZ T1,CDBDSP(P1) ;GET CHANNEL DISPATCH
;NOTE THAT INTERRUPT ROUTINES DO NOT PRESERVE P OR Q ACCUMULATORS TO SAVE TIME
CALL CDSINT(T1) ;PASS INTERRUPT DOWNWARD
JRST [ MOVX T1,CS.AC2 ;AN ERROR WAS DETECTED, SHUT DOWN
ANDCAM T1,CDBSTS(P1) ;STACKED COMMAND
JRST .+1]
JUMPE P4,XINT ;REQUEST TO DISMISS
JUMPL P4,[ SETZ P5, ;INSURE WE DON'T CALL THIS ALTERNATE UNIT FINISH
MOVX T1,CS.ERC ;REQUEST FOR SCHEDULE CYCLE,
TDNN T1,CDBSTS(P1) ;IS CHANNEL IN ERR RECOV?
JRST INT2 ;NO - HONOR REQUEST
JRST XINT] ;YES - SCHED AT END OF ERR RECOV
PHYINU::HLL Q3,UDBSTS(P3) ;SET UP LEFT HALF FOR SOME TESTS
HRRZ T1,UDBTWQ(P3) ;CHECK IF THIS IS THE
TXNE Q3,US.POS ;IORB WE EXPECTED
HRRZ T1,UDBPWQ(P3) ;FROM EITHER QUEUE
CAIE T1,(P4) ;??
BUG.(HLT,ILTWQ,PHYSIO,HARD,<PHYINT - TWQ or PWQ incorrect>,,<
Cause: In the PHYINT routine to handle an interrupt, after the lower level
interrupt code has returned, a check is made to see if the IORB
returned matched the first element of either the position wait queue or
the transfer wait queue. The returned IORB did not match the first
element in the queue checked.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>) ;NO.
SKIPE UDBERR(P3) ;ERROR RECOVERY IN PROGRESS?
JRST INTERR ;YES - MUST CALL LOWER LEVEL IN ALL CASES
MOVE T1,IRBSTS(P4) ;YES - ANY ERROR INDICATION?
TXNN T1,IS.ERR!IS.WGU!IS.DTE!IS.DVE!IS.RTL ;??
JRST INTDON
INTERR: SKIPN T1,UDBERP(P3) ;ERRORS - ERROR BLOCK SETUP?
JRST [ MOVX T1,CS.ERC ;NO, SET ERROR RECOVERY ON CHANNEL
TXNN Q3,US.POS ;TRANSFER?
IORM T1,CDBSTS(P1) ;YES
CALL ERRSET ;CREATE ERROR BLOCK
JRST .+1] ;CONTINUE
MOVEM T1,UDBERP(P3) ;STORE IN UDB
MOVE T1,UDBDSP(P3) ;GET UNIT DISPATCH
CALL UDSERR(T1) ;INVOKE ERROR RETRY
JRST XINT ;NON SKIP - RETRY IN PROGRESS
;SKIP - DONE WITH RECOVERY, FOR GOOD OR ILL
MOVX T1,CS.ERC ;SETUP TO CLEAR ERROR RECOVERY FLAG
TXNN Q3,US.POS ;TRANSFER?
ANDCAM T1,CDBSTS(P1) ;YES - CLEAR FLAG
INTDON: TXNE Q3,US.POS ;TAKE REQUEST OUT OF QUEUE
JRST INT8 ;HANDLE TERMINATION IN POSITIONING
CALL OFFTWQ ;PULL FROM TWQ
MOVX T1,CS.AC2 ;IS THIS A STACKED COMMAND
TDNE T1,CDBSTS(P1) ; ??
JRST [ANDCAM T1,CDBSTS(P1) ;YES, CLEAR BIT IN CHAN
JRST INTDN1] ;AND CONTINUE
HRRZ T1,UDBTWQ(P3) ;GET 1ST REMAINING ENTRY ON TWQ
ADD T1,UDBPWQ(P3) ;PLUS 1ST ON PWQ
HRRZS T1 ;LEAVE T1 NON-0 IF UNIT IS ACTIVE
MOVX T2,US.CIP
TDNE T2,UDBSTS(P3) ;IS THE UNIT ON A CI?
JUMPN T1,INT0 ;LEAVE UNIT ACTIVE IF SOMETHING ELSE IS HAPPENING
CALL CLRACT ;NO LONGER ACTIVE
INTDN1: SKIPL P5,UDB2ND(P3) ;XFER ON AN ALTERNATE UNIT?
JRST INT0 ;NO, CONTINUE
MOVX T1,US.ACT ;YES, CLEAR US.ACT
ANDCAM T1,UDBSTS(P5) ; IN PRIME UNIT TOO
CALL DONIRB ;SET TRANSFER COMPLETE
HRR P5,P3 ;SAVE THIS UDB ADDRESS
HRRZ P3,UDB2ND(P3) ;POINT P3 AT PRIME UNIT
HRRZ P2,UDBKDB(P3) ;SET UP P1 AND P2 ALSO
HRRZ P1,UDBCDB(P3) ;SO SUBSEQUENT IO REQUESTS WILL BE FOR PRIME UNIT
JRST INTA ;AND CONTINUE
;HERE IF INTERRUPT IS FROM A CI UNIT WHICH IS STILL BUSY
INT0: CALL DONIRB ;POST IORB AS DONE
INTA:
MOVE T1,CDBSTS(P1) ;STATUS OF CHAN
TXNE T1,CS.CIP ;IS IT A CI CHAN?
RET ;YES, WE'RE THROUGH
SKIPE PWRDWN ;OR POWER FAILING?
JRST XINT ;YES - DISMISS
JUMPGE P5,INT2 ;GO IF WE DID THE IO ON A PRIME UNIT
MOVE P3,P5 ;IO WAS ON AN ALTERNATE - RESET ACS
HRRZ P2,UDBKDB(P3) ; SO AS TO LOOK ON RIGHT CHAN, CONTROL
HRRZ P1,UDBCDB(P3) ; FOR MORE WORK TO DO
INT2: CALL SCHSEK ;SCHEDULE SEEKS (IF NEEDED)
PUSH P,P3 ;SAVE DUAL-PORTED FLAG
CALL SCHXFR ;SCHEDULE TRANSFERS
JUMPN P5,INT3 ;FINISH ON A DUAL-PORTED DRIVE (OR JUST SEEKS FINISH)?
;NO, SINGLE-PORTED DRIVE. EXIT INTERRUPT
JRST XINT
;HERE WHEN A DUAL-PORTED DRIVE FINISHED, OR JUST SEEKS FINISHED
;THE MAIN PORT OF THIS DRIVE MAY HAVE XFERS WHICH ARE WAITING, OR SOME
;OTHER DRIVE MAY BE DUAL-PORTED TO THIS CHAN AND HAVE IO WHICH CAN BE STARTED.
;SCAN ALL DRIVES ON THIS CHAN, LOOKING FOR DUAL-PORTED DRIVES WE CAN START
INT3: MOVE Q1,CDBIUN(P1) ;POINTER TO LOOK AT ALL DRIVES
INT4: SKIPE P3,(Q1) ;UDB EXIST?
SKIPN P5,UDB2ND(P3) ;YES, DUAL PORTED?
JRST INT7 ;NOT A DUAL-PORTED DRIVE. TEST NEXT
SKIPG P5 ;IS THIS THE ALTERNATE PATH?
EXCH P3,P5 ;YES, RESET SO P3=MAIN PORT, P5=ALTERNATE
MOVE T1,UDBSTS(P3) ;STATUS
TXNE T1,US.ACT ;IS DRIVE ALREADY ACTIVE?
JRST INT7 ;YES, KEEP ON LOOKING
HRRZ P4,UDBTWQ(P3) ;NO. DOES IT HAVE ANYTHING TO DO?
JUMPE P4,INT7 ;NO. TRY NEXT DRIVE
PUSH P,P1 ;YES, TRY TO START IT GOING
CALL CKSTRT ;CAN WE START IT ON THE MAIN PORT?
JRST INT5 ;NO, TRY OTHER PORT
CALL STRTIO ;START IT GOING
JFCL ;WONT START, TOO BAD
JRST INT6 ;LOOK FOR MORE DRIVES TO START
INT5: EXCH P3,P5 ;SET TO LOOK AT ALTERNATE PATH
CALL CKSTRT ;CAN WE START IT HERE?
JRST INT6 ;NO, CAN'T START THIS DRIVE ON EITHER PORT
CALL STRALT ;YES. START IT GOING ON ALTERNATE PORT
INT6: POP P,P1
INT7: AOBJN Q1,INT4 ;TRY NEXT UNIT
POP P,P3 ;RESTORE FLAG
JUMPGE P3,XINT ;GO IF WE DID IT ON THE MAIN UNIT
HRRZ P3,UDB2ND(P3) ;ALTERNATE - SWITCH TO MAIN PORT TO LOOK FOR SEEKS
MOVE T1,UDBSTS(P3) ;IS UNIT ACTIVE AGAIN?
TXNE T1,US.ACT ;...
JRST XINT ;YES, WE'RE DONE
HRRZ T1,UDBTWQ(P3) ;NOT ACTIVE. IS THERE A SEEK WAITING
JUMPN T1,XINT ; AND NO TRANSFER WAITING?
HRRZ T1,UDBPWQ(P3) ;NO XFER, ANY SEEKS TO DO?
JUMPE T1,XINT ;NONE IF 0
HRRZ P4,T1 ;POINT P4 AT THE IORB
HRRZ P2,UDBKDB(P3) ;POINT P2 AT KDB
PUSH P,P1 ;SAVE CDB ADDRESS
HRRZ P1,UDBCDB(P3) ;POINT P1 AT CDB
CALL SIO3A ;TRY AND START THE SEEK
POP P,P1 ;RESTORE CDB ADDR (FOR DISMISSING INTERRUPT)
XINT:: MOVSI P,PHYACS ;RESTORE BLT POINTER
JRST CDBJEN(P1) ;RESTORE ACCUMULATORS AND DISMISS
;HERE WHEN AN IORB TERMINATES ON THE PWQ
INT8: CALL OFFPWQ ;PULL FROM QUEUE
CALL CLRPOS ;NO LONGER POSITIONING
CALL DONIRB ;POST DONE
CALL SCHSEK ;SEE IF MORE TO DO
SKIPE PWRDWN ;POWER FAILING?
JRST XINT ;YES, DON'T START NEW I/O
MOVE T1,CDBSTS(P1) ;GET CHANNEL STATUS
TXNN T1,CS.ACT!CS.ERC!CS.OFL ;CHANNEL AVAILABLE?
CALL SCHXFR ;NO, SEE IF ANY WORK TO DO
JRST XINT ;THEN EXIT
;HERE TO POST AN IORB COMPLETE
;P4/ IORB
; CALL DONIRB
;RETURNS+1(ALWAYS)
DONIRB: MOVX T1,IS.DON ;FLAG DONE
MOVX T2,IS.WGU!IS.TPM!IS.EOT!IS.DTE!IS.DVE!IS.BOT!IS.RTL
TDNE T2,IRBSTS(P4) ;ANY ERRORS?
TXO T1,IS.ERR ;YES, SET GENERAL ERROR BIT
IORM T1,IRBSTS(P4) ; ...
CALL ERRFIN ;TERMINATE ERROR RECOVERY IF NEEDED
SKIPL IRBSTS(P4) ;SHORT IORB?
JRST DONIR1 ;NO - CALL SPECIFIED ADDRESS
MOVX T2,IS.WGU!IS.DTE!IS.DVE!IS.RTL ;IF ANY OF THESE ERRORS
MOVX T3,SWPERR ;NOTIFY PAGEM
MOVEI T1,-CST5(P4) ;GET CPN
TDNE T2,IRBSTS(P4) ; CHECK.
JRST DONIR4 ;YES...GO NOTIFY PAGEM
PUSH P,T1 ;SAVE T1 FOR LATER
LDB T1,IRYFCN ;GET TYPE OF IORB
CAIN T1,IRFWVC ;VALIDITY WRITE DONE?
JRST [ MOVEI T1,IRFRVC ;YES, MAKE IT A READ
DPB T1,IRYFCN ;PUT IT INTO THE IORB
MOVX T1,IS.DON ;GET THE IORB DONE FLAG
ANDCAM T1,(P4) ;AND TURN IT OFF
AOS UDBFCT(P3) ;AND DONT LET THIS HURT FAIRNESS COUNT
AOS DSKRVC ;INCREMENT SYSTEM WIDE SKIP READ COUNT
MOVX T1,US.CIP ;CHECK FOR CI DISK
TDNE T1,UDBSTS(P3) ;IS IT ?
JRST .+1 ;YES DON'T RE-QUEUE IT ALREADY DONE
MOVE T1,P4 ;PUT POINTER INTO T1 FOR PHYSIO
CALL ONTWQ ;AND QUEUE IT TO THE DISK
POP P,T1 ;CLEAN STACK UP
RET]
CAIN T1,IRFRVC ;OR READ VALIDITY CHECK?
JRST [ MOVEI T1,IRFWRT ;GET WRITE FUNCTION
DPB T1,IRYFCN ;AND FIX IORB BACK FOR PAGEM
JRST .+1] ;BACK TO THE MAIN LINE, AND LET PAGEM RUN
POP P,T1 ;RESTORE T1 WITH PAGE NUMBER
DONIR3: PUSH P,P1 ;SAVE REGISTERS
PUSH P,P3 ; ...
CALL SWPDON ;NOTIFY PAGEM
POP P,P3 ;RESTORE REGISTERS
POP P,P1 ; ..
RET
DONIR4: CALL [ EA.ENT ;ENTER SECTION ONE
IORM T3,@CST3X+T1 ;ERRORS - INDICATE TO PAGEM.
RET] ;RETURN TO CORRECT SECTION
JRST DONIR3 ;CONTINUE, BUT FORGET VERIFICATION
;HERE ON COMPLETION OF A LONG IORB
DONIR1: HRRZ T2,IRBIVA(P4) ;GET CALLERS INTERRUPT ADDRESS
JUMPE T2,DONIR2 ;IS THERE AN INTERRUPT ROUTINE?
MOVE T1,P4 ;COPY IORB FOR CALL
CALLRET (T2) ;CALL
DONIR2: BUG.(CHK,PHYNIR,PHYSIO,SOFT,<PHYSIO - Null interrupt routine at operation done>,,<
Cause: The routine DONIRB, when terminating a long IORB, attempted to notify
higher level code about the finished IORB, but the field in the IORB
that contained the address to call was zero.
Action: If this BUGCHK is persistant on the system, change it to a BUGHLT and
send in an SPR with the dump and how to reproduce the problem.
>)
RET
SUBTTL Start IO
;HERE TO ENQUEUE AN IO REQUEST.
; T1/ IORB
; T2/ UDB (FOR LONG IORB ONLY)
; CALL PHYSIO
;RETURNS+1:(ALWAYS)
; IO REQUEST MADE. IF UNIT IS OFFLINE, A MESSAGE TO THE
; OPERATOR WILL BE PRINTED. IF THE CALL IS IN ANY WAY
; INVALID (NONEXISTANT UNIT, BAD ADDRESS, ETC.) A BUGHLT WILL OCCUR
; THE CALLING ROUTINE IS ASSUMED TO HAVE MADE THOSE CHECKS
; AND PASSED.
; **NOTE** NOSKED IS ASSUMED, AS A PRIVATE STACK IS USED
PHYSIO::
MOVEM P,PHYSVP ;SAVE CALLERS STACK
MOVE P,[IOWD LPHYPD,PHYPDL] ;LOCAL STACK
CALL SIO1 ;DO THE REAL WORK
MOVE P,PHYSVP ;RESTORE CALLERS PC
RET
;DETERMINE CHANNEL/CONTROLLER/UNIT FOR THIS IORB
RS PHYIFL,1 ;FLAG TO INDICATE THAT WE SHOULD NOT TURN ON IO
IOSIO:: SETOM PHYIFL ;REMEMBER THAT IO IS OFF ALREADY
SIO1: SAVEPQ ;SAVE CALLERS REGISTERS ON LOCAL STACK
HRRZ P4,T1 ;SET UP IORB POINTER
HRRZ P3,T2 ;ALSO SET UP UDB ADDRESS (IN CASE IORB IS LONG)
SKIPL IRBSTS(P4) ;SHORT IORB?
JRST SIO2 ;NO, UDB ADDRESS ALREADY SET UP
CALL GETCUB ;YES, COMPUTE UDB FROM PAGEM ADDRESS
BUG.(HLT,ILPDAR,PHYSIO,HARD,<PHYSIO - Illegal disk address in PAGEM request>,,<
Cause: The routine PHYSIO was called to queue up an IORB for PAGEM, but the
disk or swapping address, or unit was illegal. All such arguments
should have been checked by the caller.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
;T1 HAS UNIT ADDRESS (LINEAR)
MOVEI T2,-CST5(P4) ;GET CORE PAGE NUMBER
STOR T1,CSTLDA,+T2 ;STORE UNIT RELATIVE ADDRESS
SIO2: HRRZ P1,UDBCDB(P3) ;SET UP CDB ADDRESS
HRRZ P2,UDBKDB(P3) ;ALSO SET UP KDB ADDRESS OR ZERO IF NONE
HRRZ T2,UDBDSP(P3) ;GET UNIT DISPATCH BASE
SKIPN PHYIFL ;IF WE SHOULD
IOPIOF ; TURN PHYSIO CHANNELS OFF
HLL Q3,UDBSTS(P3) ;GET LEFT HALF STATUS OF UNIT
TXNE Q3,US.CIP ;UNIT ON A CI PORT?
JRST SIO8 ;YES, GO DIRECTLY TO START IO
TXNE Q3,US.POS ;IS POSITION IN PROGRESS?
JRST SIO3 ;YES - APPEND TO PWQ
TXNE Q3,US.TAP ;IS THIS A TAPELIKE DEVICE?
JRST SIO6 ;YES - SEE IF POSITIONING TO DO
TXNN Q3,US.PRQ ;DOES THIS UNIT POSITION?
JRST SIO4 ;NO - APPEND TO TWQ
CALL UDSCNV(T2) ;YES - GET CYLINDER (PS1) IN T2
SIO2DL::CAME T2,UDBPS1(P3) ;SAME AS CURRENT UDBPS1? (TAG FOR DLLOOK)
JRST SIO3 ;NO - POSITIONING NEEDED
SOSLE UDBFCT(P3) ;YES - SHOULD WE DO SOME OTHER CYL?
JRST SIO4 ;NO - ADD REQUEST TO TWQ
HRRZ T1,UDBPWQ(P3) ;COUNT EXHAUSTED, REQUESTS TO OTHER CYLS?
JUMPE T1,SIO4 ;IF NO, APPEND TO TWQ ANYWAY
SIO3: MOVE T1,P4 ;PLACE ON PWQ
CALL ONPWQ ; ...
SIO3A: MOVX T1,US.OIR!US.OMS!US.POS!US.ACT!US.MAI!US.MRQ!US.REW
MOVX T2,CS.MAI!CS.MRQ!CS.OFL ;GET FLAGS READY
TDNN T1,UDBSTS(P3) ;UNIT AVAILABLE?
TDNE T2,CDBSTS(P1) ;AND CHANNEL AVAILABLE?
JRST ONRET ;NO, DO NOTHING
MOVX T1,KS.ACT ;GET CONTROLLER BUSY FLAG
TRNE P2,-1 ;IS THERE A CONTROLLER?
TDNN T1,KDBSTS(P2) ; ...
SKIPA ;(NO,NO)
JRST ONRET ;(YES,YES)
HRRZ T1,UDBTWQ(P3) ;ARE THERE ANY TRANSFER PENDING ON CYLINDER?
JUMPN T1,ONRET ;IF SO, DONT MOVE UNIT
CALL STRTPS ;UNIT FREE - START POSITIONING
JFCL ;COULDNT DO IT, BUT NOTHING ELSE TO DO
JRST ONRET ;ENABLE PI AND RETURN
;HERE WHEN REQUEST NEEDS NO POSITIONING
SIO4: MOVE T1,P4 ;PLACE ON TWQ
CALL ONTWQ ; ...
SKIPE PWRDWN ;POWER FAILING?
JRST ONRET ;YES - DONT STARTUP A NEW REQUEST
MOVE T2,UDBSTS(P3) ;GET UNIT STATUS
TXNE T2,US.POS!US.REW!US.OIR!US.OMS!US.MAI!US.MRQ ;UNIT AVAILABLE?
JRST ONRET ;NO.
MOVE T1,CDBSTS(P1) ;GET CURRENT CHANNEL STATUS
TXNE T1,CS.OFL!CS.AC2!CS.MAI!CS.MRQ ;CHANNEL AVAILABLE?
JRST SIO7 ;NO, SEE IF ALTERNATE PATH EXISTS
TXNN T1,CS.AC1 ;PRIMARY COMMAND ACTIVE?
JRST SIO5 ;NO - SEE IF UNIT REALLY FREE
TXNN T2,US.DSK ;IS THIS A DISK?
JRST ONRET ;NO, DON'T STACK FOR MAGTAPES
MOVE T1,CDBXFR(P1) ;IS THIS THE ACTIVE UNIT?
CAME T1,UDBADR(P3) ; ???
JRST SIO7 ;NO, SEE IF ALTERNATE PATH AVAILABLE
CALL SCHXFR ;YES, SEE IF WE CAN STACK ANOTHER COMMAND
JRST ONRET
SIO5: MOVX T1,US.ACT ;GET ACTIVE BIT FOR UNIT
MOVX T2,KS.ACT ;AND FOR THE CONTROLLER
TRNE P2,-1 ;CHECK FOR EXISTANCE OF CONTROLLER
TDNN T2,KDBSTS(P2) ;CONTROLLER BUSY?
TDNE T1,UDBSTS(P3) ;OR THE UNIT?
JRST ONRET ;YES, DO NOTHING
HRRZ P4,UDBTWQ(P3) ;GET THE IORB ON HEAD OF THE TWQ
CALL STRTIO ;STARTUP THIS UNIT
JFCL ;CANT START IT, BUT NOTHING ELSE TO DO.
JRST ONRET ;RESTORE PI
;HERE TO SEE IF REQUEST SHOULD GO THROUGH POSITION CYCLE
SIO6: CALL UDSPRQ(T2) ;ASK DEVICE
JRST SIO4 ;TRANSFER ONLY
JRST SIO3 ;POSITION FIRST
;HERE TO SEE IF REQUEST CAN BE STARTED ON ALTERNATE PATH
SIO7: TXNE T2,US.ACT ;IS UNIT ACTIVE?
JRST ONRET ;YES, GO AWAY
MOVE P5,P3 ;NO, SAVE ORIGINAL UDB
SKIPE P3,UDB2ND(P3) ;DRIVE DUAL-PORTED?
SKIPG UDBSTS(P3) ;YES, OTHER PORT ON-LINE?
JRST ONRET ;NO, RETURN
CALL CKSTRT ;CAN WE START IO ON THIS PORT?
JRST ONRET ;NO, CAN'T START IT. RETURN
CALL STRALT ;TRY TO START IT ON ALTERNATE PATH
JRST ONRET ;RESTORE PI AND RETURN
;HERE IF THE UNIT IS ON A CI PORT. START THE IO
SIO8: MOVE T1,P4 ;PUT REQUEST ON FRONT OF TWQ
CALL ONFTWQ
CALL STRTIO ;START IT UP
JFCL ;COULDN'T START IT
JRST ONRET ;RESTORE PI AND RETURN
;HERE TO SEE IF WE CAN START IO ON THE UDB POINTED TO BY P3
;ENTER WITH
;P3/UDB OF PORT TO START IO ON
;EXIT WITH
;P1/CDB OF THE UNIT
;P2/KDB OF THE UNIT
;RETURNS +1 IF CHAN/CONTROL ARE BUSY
; +2 IF CHAN/CONTROL ARE IDLE
CKSTRT: HRRZ P2,UDBKDB(P3) ;YES, SET UP P2 AND P1
HRRZ P1,UDBCDB(P3) ; POINTING AT ALTERNATE CONTROLLER, CHANNEL
MOVX T1,CS.ACT ;ARE CHAN, CONTROL AVAILABLE?
MOVX T2,KS.ACT ;...
TRNE P2,-1 ;CONTROLLER EXIST?
TDNN T2,KDBSTS(P2) ;YES, IDLE?
TDNE T1,CDBSTS(P1) ;AND CHAN IDLE?
RET ;BUSY
RETSKP ;IDLE
;HERE TO START AN IO ON THE ALTERNATE PATH
;ENTER WITH
;P3/UDB ADDRESS OF ALTERNATE PORT
;P5/UDB ADDRESS OF MAIN PORT
;RETURNS +1 (ALWAYS)
STRALT: EXCH P3,P5 ;WE'LL START IT ON ALTERNATE PATH
CALL OFFTWQ ;PULL FROM TWQ FOR PRIME PORT
HRRZ P4,T1 ;POINT P4 AT FIRST IORB
EXCH P3,P5
CALL ONFTWQ ;PUT IT AS (ONLY) IORB ON ALTERNATE PORT
CALL STRTIO ;STARTUP THE IORB
SKIPA ;CANT START IT NOW (PROBABLY OFF-LINE)
JRST STRAL1 ;STARTED - FINISH UP
HRRZ T1,UDBTWQ(P3) ;NO START. IF TWQ IS NOW EMPTY
JUMPE T1,R ; THE IORB WAS REMOVED, WE'RE DONE
CALL OFFTWQ ;REMOVE FROM TWQ OF ALTERNATE UNIT
EXCH P3,P5 ; (WANT TO KEEP THAT UDB CLEAN)
CALL ONFTWQ ;PUT IT ON FRONT OF TWQ OF PRIME UDB
RET ;AND RETURN TO CALLER
;HERE IF IORB WAS STARTED ON ALTERNATE PATH
STRAL1: MOVX T1,US.ACT ;INDICATE PRIME UDB IS ACTIVE TOO
IORM T1,UDBSTS(P5) ; SO WE WON'T TRY TO START BOTH PORTS AT ONCE
RET
SUBTTL Position Done
;POSITION DONE - TRANSFER ALL REQUESTS FOR THIS CYLINDER FROM PWQ TO TWQ
;CALLED ONLY AT INTERRUPT LEVEL
;P1/ CDB, P3/ UDB, USES P4
PHYSDN::CALL CLRSRC ;UNIT NO LONGER SEARCHING
SKIPA ;SKIP
PHYPDN::CALL CLRPOS ;UNIT NO LONGER POSITIONING
HRRZ P4,UDBPWQ(P3) ;GET HEAD OF PWQ
CALL ERRFIN ;RETURN ERROR BLOCK IF ONE ACTIVE
SAVEQ
MOVEI T1,INIFCP ;RESET FAIRNESS COUNT FOR POSITIONING
MOVEM T1,UDBFCT(P3) ; ...
MOVEI Q1,UDBPWQ(P3) ;PREVIOUS IORB IS INITIALLY HEAD CELL
HRRZ Q2,UDBDSP(P3) ;GET UNIT DISPATCH
SKIPN P4 ;WAS PWQ NULL?
JRST PDN4 ;YES - COMPLAIN THEN EXIT
PDN1: CALL UDSCNV(Q2) ;GET CYLINDER FOR IORB IN P4
CAME T2,UDBPS1(P3) ;SAME AS CURRENT CYLINDER?
JRST PDN3 ;NO - KEEP LOOKING
MOVE T1,Q1 ;PREDECESSOR
MOVE T2,P4 ;CURRENT IORB
CALL CONSPW ;REMOVE CURRENT, SPLICE PWQ
MOVE T1,P4 ;APPEND CURRENT TO TWQ
CALL ONTWQ ; ...
PDN2: HRRZ P4,IRBLNK(Q1) ;GET NEW CURRENT IORB
JUMPN P4,PDN1 ;IF NOT AT END, KEEP LOOKING
HRRZ T1,UDBTWQ(P3) ;CHECK SOME REQUEST WAS FOUND
SKIPN T1 ; ??
BUG.(CHK,NRFTCL,PHYSIO,HARD,<PHYSIO - No requests found for cylinder seeked>,,<
Cause: The routine PHYPDN was called on a position-done interrupt to transfer
any IORBs that were on the position wait queue into the transfer wait
queue; but no IORBs were found which were for this cylinder.
Action: If this BUGCHK is persistant on the system, change it to a BUGHLT and
send in an SPR with the dump and how to reproduce the problem.
>)
RET ;YES - ALL IS WELL
PDN3: MOVE Q1,P4 ;MOVE DOWN THE LIST
JRST PDN2 ;AND CONTINUE
PDN4: CALL FNDCKU ;[7264](P1,P3/T1,T2,T3)GET CHAN,CONTROLLER,UNIT
BUG.(CHK,NPWQPD,PHYSIO,HARD,<PHYSIO - Null PWQ at position done>,<<T1,CHAN>,<T2,CONTRL>,<T3,UNIT>>,<
Cause: A position-done interrupt occurred, and the routine PHYPDN was called
to move IORBs from the position wait queue into the transfer wait
queue, but the position wait queue was empty.
Action: If the problem persists, Field Service should check out the unit
specified in the additional data.
Data: CHAN - The channel number
CONTRL - The controller number (-1 if no controller)
UNIT - The unit number
>)
RET ;JUST EXIT
SUBTTL Utilities
;ENTER WITH
;T1/ UNIT NUMBER
;P1/ CDB
; CALL SETUDB
;RETURNS+1(ALWAYS):
;P2/ KDB (IF APPROPRIATE)
;P3/ UDB CORRESPONDING TO SPECIFIED UNIT # ON CHANNEL
; NOTE: IN THE CASE OF TAPES P3 MAY BE -1 SINCE WE RETURN THE ACTIVE UDB
;T1/ UNCHANGED
;T2/ DISPATCH FOR CORRESPONDING UNIT TYPE
SETUDB::MOVE T2,CDBIUN(P1) ;GET UDB TABLE POINTER
HLRE T3,T2 ;SEE IF LEGAL NUMBER
MOVNS T3 ;AS POSITIVE NUMBER
CAIL T1,(T3) ;LEGAL?
BUG.(HLT,PYILUN,PHYSIO,HARD,<PHYSIO - Illegal unit number>,,<
Cause: The routine SETUDB was called to find the UDB and KDB pointers given
the CDB and unit number, but the unit number given was out of range.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
ADD T2,T1 ;GET UDB
SKIPN P3,(T2) ; ...
JRST SETUD2 ;NONE PRESENT
LDB T2,USYBKT ;GET BLOCK TYPE
CAIE T2,.BTUDB ;UDB?
JRST SETUD1 ;NO
HRRZ P2,UDBKDB(P3) ;GET KDB IF ANY
HRRZ T2,UDBDSP(P3) ;RETURN DISPATCH
RET
SETUD1: MOVE P2,P3 ;COPY KDB
SKIPN P3,KDBACT(P2) ;GET THE ACTIVE UDB IF POSSIBLE
SETO P3, ;RETURN -1 IF NOT THERE
HRRZ T2,KDBDSP(P2) ;AND RETURN DISPATCH
RET
SETUD2: SETZB P2,P3 ;RETURN 0
RET
;UTILITY TO RETURN THE ACTIVE IORB ON A UNIT
;P3/ UDB
; CALL SETIRB
;RETURNS+1(ALWAYS):
;P4/ ACTIVE IORB
;PRESERVES T1
SETIRB::HRRZ P4,UDBPWQ(P3) ;ASSUME POSITIONING
MOVX T2,US.POS ;IS UNIT REALLY POSITIONING?
TDNN T2,UDBSTS(P3) ; ???
HRRZ P4,UDBTWQ(P3) ;NO - GET HEAD OF TWQ
JUMPN P4,R ;RETURN IF THERE REALLY WAS ONE
BUG.(HLT,NOIORB,PHYSIO,HARD,<SETIRB - Missing IORB>,,<
Cause: The routine SETIRB was called for an active unit to return the
currently active IORB for the unit, but the position wait queue or
transfer wait queue was empty.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
;DETERMINE THE UNIT RELATIVE ADDRESS FOR A DISK REQUEST
;P4/ IORB
; CALL PHYBLK
;RETURNS+1(ALWAYS):
;T2/ UNIT RELATIVE ADDRESS
;CLOBBERS T1,T2
PHYBLK::
EA.ENT ;WE NEED TO BE IN SECTION ONE
SKIPL IRBSTS(P4) ;SHORT IORB?
JRST BLK1 ;NO
MOVEI T2,-CST5(P4) ;YES - GET CPN
LOAD T2,CSTLDA,+T2 ;GET UNIT RELATIVE ADDRESS
RET
BLK1: MOVE T2,IRBADR(P4) ;GET UNIT RELATIVE ADDRESS
RET
;DETERMINE CORRECT CHANNEL AND UNIT FROM A DISK REQUEST
;P4/ IORB
;T4/ STRUCTURE NUMBER IF NOT FROM PAGEM
; CALL GETCUB
;PRESERVES T3,4
;DESTROYS T2
;RETURNS+1:
;ERROR - INVALID ADDRESS
;RETURNS+2:
;T1/ UNIT RELATIVE ADDRESS
;P1/ CDB
;P2/ KDB, OR 0 IF NONE
;P3/ UDB
;
;LOCAL FLAGS IN THE LEFT OF T2
;DSKAB, DRMOB
GETCUB: SAVEQ ;PRESERVE ACCUMULATORS
SETZ T2, ;CLEAR OUR FLAGS, FOR NOW
SKIPGE IRBSTS(P4) ;SHORT FORM IORB?
JRST GTCUB5 ;YES - GET CST1
MOVE Q2,IRBADR(P4) ;NO - GET IORB ADDRESS
MOVEI Q1,0(T4) ;SAVE STRUCTURE NUMBER
GTCUB1: SKIPN Q1,STRTAB(Q1) ;ANY SUCH STRUCTURE?
RET ;ILLEGAL STRUCTURE
HRR T2,Q1 ;SAVE A POINTER TO THE SDB
HLL T2,Q2 ;SAVE IORB STATUS BITS
TXNN Q2,DSKAB ;DISK ADDRESS?
JRST GTCUB3 ;NO - SWAP ADDRESS
TLZ Q2,DSKMSK ;CLEAR UNUSED BITS
IDIV Q2,SDBSIZ(Q1) ;GET UNIT, RELATIVE ADDRESS
CAML Q2,SDBNUM(Q1) ;LEGAL UNIT?
RET ;UNIT TOO LARGE
GTCUB2: ADDI Q2,SDBUDB(Q1) ;GET UDB ADDRESS
MOVE P3,(Q2) ; ...
HRRZ P1,UDBCDB(P3) ;FOLLOW BACK POINTER TO CDB
GTCUBX: HRRZ P2,UDBKDB(P3) ;AND FOLLOW POINTER TO KDB
LDB T1,IRYFCN ;GET IO TYPE
CAIN T1,IRFWRT ;WAS IT A WRITE?
JRST [ SKIPL IRBSTS(P4);PARANOID CHECK FOR SHORT FORM IORB
JRST .+1 ;IT WAS LONG, SO RETURN
HRRZ Q1,T2 ;GET ADDRESS
MOVE Q1,SDBSTS(Q1);GET STATUS BITS FROM STRUCTURE DATA BLOCK
TXNN T2,DSKAB ;SWAPPING REQUEST?
MOVEI T1,IRFWVC ;INDICATE WRITE VERIFICATION NEEDED
TXNE Q1,MS%RWS ;SWAP VERIFICATION TURNED ON?
DPB T1,IRYFCN ;YES, UPDATE IORB
MOVEI T1,IRFWVC ;MAKE SURE WE HAVE THE RIGHT FUNCTION
SKIPE VSMFLG ;ARE WE FORCING THE ISSUE?
DPB T1,IRYFCN ;YES, DO IT
TXNN T2,DSKAB ;DISK ADDRESS
JRST .+1 ;NO, RETURN TO MAIL LINE
TXNE Q1,MS%RWD ;VERIFYING DATA?
DPB T1,IRYFCN ;YES, SET VERIFY FUNCTION
JRST .+1]
MOVE T1,Q3 ;UNIT RELATIVE ADDRESS
RETSKP ;SUCCESS RETURN
;HERE IF SWAPPING ADDRESS
GTCUB3: TXNN Q2,DRMOB ;REAL DRUM ADDRESS?
JRST GTCUB4 ;YES
TLZ Q2,-1 ;NO - CLEAR UNUSED BITS ***SYMBOL***
MOVE T1,SDBTYP(Q1) ;GET TYPE OF THIS DEVICE
IDIV Q2,SECCYL(T1) ;GET TRACK(CYLINDER), SECTOR IN TRACK
MOVE P3,Q3 ;SAVE SECTOR WITHIN TRACK
IDIV Q2,SDBNUM(Q1) ;GET UNIT RELATIVE TRACK, UNIT
EXCH Q2,Q3 ;PUT UNIT IN Q2
IMUL Q3,SECCYL(T1) ;GET SECTOR STARTING TRACK ON UNIT
ADD Q3,P3 ;ADD SECTOR WITHIN TRACK
CAML Q3,SDBNSS(Q1) ;CHECK WITHIN LIMIT
RET ;SWAPPING ADDRESS TOO LARGE
ADD Q3,SDBFSS(Q1) ;SWAP AREA OFFSET
JRST GTCUB2 ;JOIN OTHER CODE
;HERE IF REAL DRUM ADDRESS
GTCUB4: LOAD Q1,DRTRK,Q2 ;GET TRACK
LOAD Q2,DRSEC,Q2 ;GET SECTOR
IMULI Q1,DRMSEC ;GET SECTORS
ADD Q2,Q1 ;INTO Q2
IDIVI Q2,NTRK*DRMSEC ;GET UNIT AND RELATIVE ADDRESS
HLRZ P1,DRMTAB(Q2) ;GET CDB
HRRZ P3,DRMTAB(Q2) ;GET UDB
JRST GTCUBX
;HERE ON A PAGEM REQUEST
GTCUB5:
MOVEI Q2,-CST5(P4) ;GET CPN
CALL [ EA.ENT ;ENTER SECTION ONE
MOVE Q1,@CST2X+Q2 ;GET OWNER IDENT
RET] ;AND RETURN TO CORRECT SECTION
CAIL Q1,NOFN ;FILE?
JRST GTCB5A ;NO
MOVX T1,OFN2XB ;SECOND XB
TDNN T1,SPTH(Q1) ; ??
JRST GTCB5A ;NO
LDB T1,IRYFCN ;GET OPERATION
CAIE T1,IRFRVC ;READ VERIFY
CAIN T1,IRFRED ;READ?
AOSA XB2RED ;YES
AOS XB2WRT ;NO - WRITE
GTCB5A:
CALL [ EA.ENT ;ENTER SECTION ONE
MOVE Q2,@CST1X+Q2 ;GET DISK ADDRESS
RET] ;AND RETURN TO CORRECT SECTION
HLL T2,Q2 ;SAVE THE BITS FOR LATER
SETZ Q1, ;ASSUME STRUCTURE 0
TXNN Q2,DSKAB ;IS THIS A DISK REQUEST?
JRST GTCUB1 ;NO. GO DO SWAPPING REQUEST
MOVEI T1,-CST5(P4) ;GET CORE PAGE NUMBER
CALL FNDSTR ;GO GET STRUCTURE NUMBER FROM PAGEM
MOVEI Q1,0(B) ;PUT IT IN THE RIGHT PLACE
JRST GTCUB1 ;JOIN OTHER PROCESSING
;HERE TO GET THE IOLIST ASSOCIATED WITH AN IORB
;P4/ IORB
;P1/ CDB
;P3/ UDB
;CALL PHYXFL
;RETURNS+1(ALWAYS):
;T1/ POINTER TO TRANSFER LIST
;T2/ POINTER TO END OF TRANSFER LIST
PHYXFL::SKIPL IRBSTS(P4) ;SHORT IORB?
JRST XFL1 ;NO - HAS OWN POINTER
MOVE T1,[IRMWRD,,PGSIZ] ;WORD MODE, ONE PAGE
LDB T2,IRYFCN ;GET FUNCTION CODE
CAIN T2,IRFRVC ;READ VALIDITY CHECK?
JRST [ MOVEI T2,SKPPAG ;YES, CLEAR PAGE, AND WRITE INTO 0
JRST PHYXF2] ;KEEP ON WITH SETUP
MOVEI T2,-CST5(P4) ;GET CPN
LSH T2,PGSFT ;AS ADDRESS
PHYXF2: HRRZ T4,CDBDSP(P1) ;GET CHANNEL DISPATCH
CALL CDSCCW(T4) ;FORM CCW FOR THIS CHANNEL
MOVEI T2,CDBCCL(P1) ;COMPUTE LIST TO USE, ASSUME PRIMARY
HLL CX,CDBSTS(P1) ;GET CHAN STATUS
TXNE CX,CS.ACL ;USE ALTERNATE?
MOVEI T2,CDBCL2(P1) ;YES
MOVEM T1,(T2) ;STORE IN CDB
SETZM 1(T2) ;MARK END WITH ZERO
MOVE T1,T2 ;RETURN ADDRESS
ADDI T2,1 ;ADDRESS OF END
RET
;HERE ON LONG FORM IORB
XFL1: HRRZ T1,IRBXFL(P4) ;GET USERS TRANSFER LIST
HLRZ T2,IRBXFL(P4) ;GET TAIL OF USERS LIST
RET
;HERE TO GET THE BYTE COUNT ASSOCIATED WITH AN IORB
;P4/ IORB
; CALL PHYCNT
;RETURNS+1(ALWAYS):
;T1/ BYTE COUNT
;PRESERVES T3,T4
PHYCNT::SKIPL IRBSTS(P4) ;SHORT IORB?
SKIPA T1,IRBCNT(P4) ;NO, GET COUNT FROM IORB
MOVEI T1,PGSIZ ;YES - ALL ONE SIZE
RET
;UTILITY TO APPEND TO TWQ
;T1/ IORB
; CALL ONTWQ
;RETURNS+1(ALWAYS):
;T1/ UNCHANGED
ONTWQ:: HLRZ T2,UDBTWQ(P3) ;GET TAIL OF TWQ
HRRZ T3,IRBLNK(T2) ;INSURE TAIL REALLY WAS TAIL
JUMPN T3,IRBERR ;NOT TAIL - BOMB
HRRM T1,IRBLNK(T2) ;STORE NEW TAIL
HRLM T1,UDBTWQ(P3) ; ...
RET
;HERE TO PLACE AN IORB AT THE FRONT OF THE TWQ
;T1/ IORB
;P3/ UDB
; CALL ONFTWQ
;RETURNS+1(ALWAYS):
; IORB AT HEAD OF TWQ
ONFTWQ::HRRZ T2,IRBLNK(T1) ;CHECK LINK OF NEW IORB IS NULL
JUMPN T2,IRBNNT ;IF NOT NULL, DIE PROMPTLY
HRRZ T2,UDBTWQ(P3) ;GET CURRENT HEAD OF TWQ
HRRM T2,IRBLNK(T1) ;POINT LINK OF NEW IORB AT IT
HRRM T1,UDBTWQ(P3) ;NEW IORB IS NEW HEAD OF LIST
JUMPN T2,R ;WAS TWQ NON NULL?
HLRZ T3,UDBTWQ(P3) ;WAS NULL
CAIE T3,UDBTWQ(P3) ;CHECK TAIL WAS FOR NULL LIST
JRST IRBERR ;POINTER WAS BAD
HRLM T1,UDBTWQ(P3) ;STORE NEW IORB AS NEW TAIL
RET
IRBNNT: BUG.(HLT,ILRBLT,PHYSIO,HARD,<PHYSIO - IORB link not null at ONF/STWQ>,,<
Cause: One of the routines ONFTWQ or ONSTWQ was called to insert an IORB into
the transfer wait queue, but the link word for that IORB was not zero.
IORBs should always contain a null link when they are created or
removed from a queue, so that many queue handling errors can be
detected.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
;HERE TO PLACE AN IORB AS THE SECOND ELEMENT ON A UNITS TWQ
;ASSUMES THE FIRST ELEMENT EXISTS
;T1/ IORB
; CALL ONSTWQ
;RETURNS+1(ALWAYS):
; IORB SECOND ON TWQ
;T1/ UNCHANGED
ONSTWQ: HRRZ T2,IRBLNK(T1) ;CHECK LINK OF IORB IS NULL
JUMPN T2,IRBNNT ;IF NOT NULL, WE HAVE TROUBLE
HRRZ T2,UDBTWQ(P3) ;GET CURRENT HEAD OF TWQ
HRRZ T3,IRBLNK(T2) ;GET CURRENT SECOND ELEMENT
HRRM T1,IRBLNK(T2) ;THIS IORB IS NOW SECOND
HRRM T3,IRBLNK(T1) ;OLD SECOND IS NOW SUCCESSOR
JUMPN T3,R ;IF SUCCESSOR NONNULL, DONE
HRLM T1,UDBTWQ(P3) ;SUCCESSOR NULL, NEW IORB IS TAIL
RET ;DONE
;APPEND TO PWQ
;T1/ IORB
;P3/ UDB
; CALL ONPWQ
;RETURNS+1(ALWAYS):
ONPWQ:: HLRZ T2,UDBPWQ(P3) ;GET TAIL POINTER
HRRZ T3,IRBLNK(T2) ;CHECK IT REALLY WAS THE TAIL
JUMPN T3,IRBERR ;NO - BOMB
HRRM T1,IRBLNK(T2) ;POINT TO NEW TAIL
HRLM T1,UDBPWQ(P3) ; ...
RET
;HERE IF THE CURRENT TAIL OF TWQ/PWQ HAS A NON ZERO FORWARD POINTER
IRBERR: BUG.(HLT,ILTWQP,PHYSIO,HARD,<PHYSIO - PWQ or TWQ tail pointer incorrect>,,<
Cause: The pointer to the last element in the position wait queue or transfer
wait queue (UDBPWQ or UDBTWQ) points to an IORB which has a non-null
link to further IORBs. This is checked in various routines such as
ONTWQ, ONPWQ, ONSTWQ, ONFPWQ, CONSTW, or CONSPW.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
;HERE TO PLACE AN IORB AT THE FRONT OF THE PWQ
;T1/ IORB
;P3/ UDB
; CALL ONFPWQ
;RETURNS+1(ALWAYS):
; IORB AT HEAD OF PWQ
ONFPWQ::HRRZ T2,IRBLNK(T1) ;CHECK LINK OF NEW IORB IS NULL
JUMPN T2,IRBNNL ;IT IS NOT NULL, LOSE BIG
HRRZ T2,UDBPWQ(P3) ;GET CURRENT HEAD OF PWQ
HRRM T2,IRBLNK(T1) ;POINT LINK OF NEW IORB AT IT
HRRM T1,UDBPWQ(P3) ;NEW IORB IS NEW HEAD OF LIST
JUMPN T2,R ;WAS PWQ NON NULL?
HLRZ T3,UDBPWQ(P3) ;WAS NULL, CHECK TAIL POINTER
CAIE T3,UDBPWQ(P3) ;CORRECT NULL LIST?
JRST IRBERR ;NO
HRLM T1,UDBPWQ(P3) ;YES - NEW HEAD IS ALSO NEW TAIL
RET
IRBNNL: BUG.(HLT,ILIRBL,PHYSIO,HARD,<PHYSIO - IORB link not null at ONFPWQ>,,<
Cause: The routine ONFPWQ was called to place an IORB at the front of the
position wait queue for a unit. But the link field in the IORB
pointing to the next IORB was not null.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
;HERE TO REMOVE AN ARBITRARY ELEMENT FROM THE TWQ
;T1/ PREDECESSOR OF ELEMENT TO BE REMOVED
;T2/ ELEMENT TO BE REMOVED
; CALL CONSTW
;RETURNS+1(ALWAYS):
; ELEMENT REMOVED
;**SEE NOTE AT START OF CONSPW**
CONSTW::JUMPE T1,CNSTWE ;CHECK ARGUMENTS
JUMPE T2,CNSTWE ; ...
HRRZ T3,IRBLNK(T1) ;CHECK FOR REMOVAL OF EXACTLY ONE ELEMENT
CAME T2,T3 ; ...
JRST CNSTWE ;MULTIPLE ELEMENTS, CURRENTLY ILLEGAL
HRRZ T3,IRBLNK(T2) ;GET HEAD OF RIGHT RESIDUE LIST
HLRZ T4,UDBTWQ(P3) ;GET TAIL OF TWQ
CAME T4,T2 ;IS TAIL OF LIST BEING REMOVED?
JRST CNSTW1 ;NO
JUMPN T3,IRBERR ;YES - INSURE RIGHT RESIDUE REALLY NULL
HRLM T1,UDBTWQ(P3) ;BACKUP TAIL OF TWQ
CNSTW1: HRRM T3,IRBLNK(T1) ;POINT PREDECESSOR TO SUCCESSOR
HLLZS IRBLNK(T2) ;CLEAR LINK IN REMOVED ELEMENT
RET
CNSTWE: BUG.(HLT,ILCNST,PHYSIO,HARD,<PHYSIO - Illegal call to CONSTW>,,<
Cause: The routine CONSTW was called to remove an element from the transfer
wait queue of a unit, but the arguments are illegal. Either the
arguments are null, or CONSTW is trying to remove more than one element
because it was passed more than one arguement.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
;HERE TO REMOVE AN ARBITRARY ELEMENT FROM THE PWQ
;T1/ PREDECESSOR OF ELEMENT TO BE REMOVED
;T2/ ELEMENT TO BE REMOVED
; CALL CONSPW
;RETURNS+1(ALWAYS):
;ELEMENT REMOVED
;NOTE: THE REASON TWO ARGUMENTS ARE REQUIRED IS TO ALLOW FOR POSSIBLE
; EXTENSION TO THE REMOVAL OF SUBLISTS. IN THIS CASE, T1 WOULD BE
; THE PREDECESSOR OF THE FIRST ELEMENT TO BE REMOVED, T2 WOULD BE
; THE LAST ELEMENT IN THE SUBLIST TO BE REMOVED. THIS CASE IS
; CURRENTLY DETECTED AS ILLEGAL.
CONSPW: JUMPE T1,CNSPWE ;VALIDATE ARGUMENTS
JUMPE T2,CNSPWE ; ...
HRRZ T3,IRBLNK(T1) ;CHECK ONE AND ONLY ONE ELEMENT IS
CAME T2,T3 ;BEING REMOVED.
JRST CNSPWE ;MULTIPLE ELEMENTS, ILLEGAL
HRRZ T3,IRBLNK(T2) ;GET HEAD OF LIST AFTER ELEMENT REMOVED
HLRZ T4,UDBPWQ(P3) ;GET TAIL OF LIST
CAME T4,T2 ;IS TAIL BEING REMOVED?
JRST CNSPW1 ;NO, NOTHING SPECIAL
JUMPN T3,IRBERR ;YES - INSURE RESIDUE REALLY NULL
HRLM T1,UDBPWQ(P3) ;BACKUP TAIL OF LIST
CNSPW1: HRRM T3,IRBLNK(T1) ;POINT PREDECESSOR TO SUCCESSOR
HLLZS IRBLNK(T2) ;CLEAR LINK IN ELEMENT REMOVED
RET
CNSPWE: BUG.(HLT,ILCNSP,PHYSIO,HARD,<PHYSIO - Illegal call to CONSPW>,,<
Cause: The routine CONSPW was called to remove an element from the position
wait queue of a unit, but the arguments are illegal. Either the
arguments are null, or CONSPW is trying to remove more than one element
because it was passed more than one arguement.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
;UTILITY TO DEQUEUE THE HEAD OF A UNITS TWQ
;P3/ UDB
; CALL OFFTWQ
;RETURNS+1(ALWAYS):
;T1/ IORB
OFFTWQ::HRRZ T1,UDBTWQ(P3) ;GET IORB AT HEAD OF TWQ
JUMPE T1,IRBMIS ;NO - BOMB
HRRZ T2,IRBLNK(T1) ;GET FORWARD LINK
HLLZS IRBLNK(T1) ;CLEAR TAIL POINTER
HRRM T2,UDBTWQ(P3) ;NOW AT HEAD
JUMPN T2,R ;UNLESS NOW NULL
MOVSI T2,UDBTWQ(P3) ;NOW NULL - RESET LIST
MOVEM T2,UDBTWQ(P3) ; ...
RET
;UTILITY TO REMOVE THE HEAD OF A UNITS PWQ
;JUST LIKE OFFTWQ
OFFPWQ::HRRZ T1,UDBPWQ(P3) ;GET IORB AT HEAD OF PWQ
JUMPE T1,IRBMIS ;NO - BOMB
HRRZ T2,IRBLNK(T1) ;GET FORWARD LINK
HLLZS IRBLNK(T1) ;CLEAR TAIL POINTER
HRRM T2,UDBPWQ(P3) ;NOW AT HEAD
JUMPN T2,R ;UNLESS NOW NULL
MOVSI T2,UDBPWQ(P3) ;NOW NULL - RESET LIST
MOVEM T2,UDBPWQ(P3) ; ...
RET
;HERE IF PWQ OR TWQ WAS NULL AT OFFPWQ/TWQ
IRBMIS: BUG.(HLT,TWQNUL,PHYSIO,HARD,<PHYSIO - PWQ OR TWQ was null at a seek or transfer completion>,,<
Cause: When I/O completed on a unit, either OFFTWQ or OFFPWQ was called to
remove the current IORB from the position wait queue or the transfer
wait queue. The error occurred because the queue was empty.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
;HERE TO REMOVE ALL NON ACTIVE IORBS FROM A UNIT TRANSFER QUEUE
; NOTE: THIS ROUTINE IS NOT CURRENTLY CALLED FOR DISK UDBS
;P1 & P3 SETUP
; CALL PHYKIL
;RETURNS+1(ALWAYS):
;T1/ HEAD OF LIST OF IORBS
;NOTE: THIS ROUTINE CAN BE CALLED FROM NONZERO SECTIONS
PHYKIL::SAVEP ;SAVE REGISTERS
HRRZ P3,T1 ;SETUP UDB
HLRZ P1,T1 ;SETUP CDB
SETZM CDBIRB(P1) ;NO PREFERENTIAL IORB ANYMORE
MOVX T1,US.ACT ;GET ACTIVE BITS READY FOR TESTING
MOVX T2,US.POS ; ...
MOVX T3,US.CIP ;CHECK FOR CI
TDNE T3,UDBSTS(P3) ;CHECK FOR CI TAPE
CALLRET PHYMKL ;KILL IT
PIOFF ;PREVENT RACE - MUST NEST IN IOPIOF
TDNN T1,UDBSTS(P3) ; .?.
JRST KILALL ;NO - CAN PRUNE ALL
TDNE T2,UDBSTS(P3) ;UNIT ACTIVE. POSITIONING?
JRST KIL2 ;YES
HRRZ T2,UDBTWQ(P3) ;PICK UP ACTIVE IORB
HRRZ T1,IRBLNK(T2) ;LINK FORWARD
JUMPE T1,KIL1 ;CHECK PWQ
HLLZS IRBLNK(T2) ;CLEAR FORWARD LINK
HLRZ T3,UDBTWQ(P3) ;GET TAIL POINTER
HRLM T2,UDBTWQ(P3) ;UPDATE TAIL POINTER
KIL1: HRRZ T2,UDBPWQ(P3) ;GET HEAD OF PWQ
JUMPE T2,PIONRT ;IF NIL, RETURN
HRRM T2,IRBLNK(T3) ;APPEND TO TWQ LIST
MOVSI T2,UDBPWQ(P3) ;RESET PWQ TO NULL
MOVEM T2,UDBPWQ(P3) ; ...
JRST PIONRT ;RETURN
KIL2: HRRZ T2,UDBPWQ(P3) ;HERE WHEN POSITIONING ACTIVE
HRRZ T1,IRBLNK(T2) ;GET ENTRY AFTER HEAD
JUMPE T1,PIONRT ;RETURN NULL
HLLZS IRBLNK(T2) ;CLEAR FORWARD LINK
HRLM T2,UDBPWQ(P3) ;UPDATE END OF LIST
JRST PIONRT ;RETURN
;HERE TO KILL ALL IORBS
KILALL: HRRZ P4,UDBTWQ(P3) ;GET IORB
JUMPN P4,KILA1 ;IF PRESENT, USE FOR ERRFIN
HRRZ P4,UDBPWQ(P3) ;NO TRANSFER, IS THERE POSITIONING
JUMPE P4,KILA2 ;NO, SKIP ERRFIN
KILA1: CALL ERRFIN ;TERMINATE ERROR RECOVERY IF NEEDED
KILA2: MOVX T1,US.OIR!US.OMS ;CLEAR OUT OPERATOR MESSAGE BITS
ANDCAM T1,UDBSTS(P3) ; ...
HRRZ T1,UDBTWQ(P3) ;GET HEAD OF LIST
HLRZ T3,UDBTWQ(P3) ;GET TAIL OF LIST
MOVSI T2,UDBTWQ(P3) ;SETUP NULL QUEUE
MOVEM T2,UDBTWQ(P3) ; ...
HRRZ T2,UDBPWQ(P3) ;GET PWQ HEAD
JUMPE T1,KILA3 ;WAS TWQ NIL?
HRRM T2,IRBLNK(T3) ;NO - APPEND TO TWQ LIST
MOVSI T2,UDBPWQ(P3) ;RESET PWQ TO NULL
MOVEM T2,UDBPWQ(P3) ; ...
JRST PIONRT ;RETURN
KILA3: MOVE T1,T2 ;TWQ NIL, RETURN PWQ
MOVSI T2,UDBPWQ(P3) ;RESET PWQ TO NULL
MOVEM T2,UDBPWQ(P3) ; ...
PIONRT: PION
RET
Repeat 0,< ;[7.1002] Remove obsolete code
;HERE TO FETCH A WORD FROM A SPECIFIED PHYSICAL ADDRESS
;T1/ PHYSICAL ADDRESS
;CALL PHYMOV
;RETURNS+1(ALWAYS):
;T1/ UNCHANGED
;T2/ CONTENTS OF ((T1))
PHYMOV::PUSH P,T1 ;SAVE ADDRESS OVER CALL
IDIVI T1,PGSIZ ;ISOLATE CPN AND RELATIVE WORD
EXCH T1,T2 ;PLACE IN CORRECT ACCUMULATORS
CALL MOVRCA ;CALL KERNEL ROUTINE
MOVE T2,T1 ;COPY RESULT
JRST PA1 ;POP T1 AND RETURN
;HERE TO STORE A WORD IN A SPECIFIED PHYSICAL ADDRESS
;T1/ PHYSICAL ADDRESS
;T2/ DATA TO STORE
; CALL PHYSTO
;T1/ UNCHANGED
PHYSTO::PUSH P,T1 ;SAVE ARGUMENT OVER CALL
MOVE T3,T2 ;MOVE DATA TO WHERE LOWER LEVEL WANTS IT
IDIVI T1,PGSIZ ;ISOLATE CPN AND RELATIVE WORD
EXCH T1,T2 ;MOVE TO CORRECT PLACE
CALL STORCA ;CALL KERNEL ROUTINE
JRST PA1 ;POP T1 AND RETURN
> ;[7.1002] End of obsolete code
;HERE TO GENERATE A CCW FOR A PARTICULAR CHANNEL
;T1/ DATA MODE,,BYTE COUNT (1B0 IF BACKWARDS)
;T2/ PHYSICAL ADDRESS OF FIRST WORD TO TRANSFER
;T3/ CDB
; CALL PHYCCW
;RETURNS+1(ALWAYS):
;T1/ CCW TO TRANSFER DATA AS SPECIFIED BY ARGUMENTS
PHYCCW::SAVEP ;PRESERVE REGISTERS
MOVE P1,T3 ;COPY CDB
HRRZ T3,CDBDSP(P1) ;GET DISPATCH ADDRESS
CALL CDSCCW(T3) ;GENERATE CCW
RET
;ROUTINE TO WAIT FOR ALL PHYSIO ACTIVITY TO CEASE.
;CALLED AT SYSTEM STARTUP TIME JUST BEFORE THE SWAPPABLE MONITOR
;IS LOADED.
PHYIOW::SAVEPQ ;SAVE PRESERVED REGISTERS
IOW1: MOVEI Q1,0 ;CLEAR ACTIVITY FLAG
MOVSI P4,-CHNN ;POINTER TO CHANNELS
IOW2: SKIPN P1,CHNTAB(P4) ;CHANNEL PRESENT?
JRST IOW3 ;NO - CONTINUE
MOVX T1,CS.ACT ;TRANSFER ON THIS CHANNEL?
TDNE T1,CDBSTS(P1) ; ???
AOJA Q1,IOW3 ;YES - SET FLAG
CALL DGUMAP ;MAP OVER ALL UNITS
CALL [ MOVX T1,US.ACT!US.POS!US.OIR!US.OMS ;CHECK ACTIVITY
TDNE T1,UDBSTS(P3) ; ...
AOS Q1 ;FLAG ACTIVITY
RET]
IOW3: AOBJN P4,IOW2 ;LOOP OVER ALL CHANNELS
JUMPN Q1,IOW1 ;IF ANY WERE ACTIVE, CHECK AGAIN
RET ;NONE ACTIVE, RETURN
;ROUTINE TO RETRIEVE UDB INFO ON TAPE POSITION
;C(T1) := TAPE UNIT NUMBER
;RETURNS:
; T1/ UDBPS2 (RECORD COUNT)
; T2/ UDBPS1 (FILE COUNT)
PHYPOS::HRRZ T3,MTCUTB(T1) ;GET POINTER TO UDB
MOVE T1,UDBPS2(T3) ;RECORD COUNT TO T1
MOVE T2,UDBPS1(T3) ;FILE COUNT TO T2
RET ;RETURN
SUBTTL Error Logging Interface
;HERE TO ASSIGN AN ERROR BLOCK
;P1/ CDB
;P3/ UDB
; CALL ERRSET
;RETURNS+1(ALWAYS):
;T1/ EB ADDRESS OR ZERO IF NONE AVAILABLE
ERRSET::MOVEI T1,MB%LEN ;TOTAL BLOCK LENGTH
MOVEI T2,MB%SIZ ;NON STRING DATA SIZE
MOVX T3,CS.CIP
TDNE T3,CDBSTS(P1) ;CI CHAN?
JRST [MOVEI T1,CI%LEN ;YES, DIFFERENT PARAMETERS
MOVEI T2,CI%SIZ
JRST .+1]
MOVX T3,IS.IEL ;GET ERROR LOGGING INHIBITED FLAG
TDNN T3,IRBSTS(P4) ;LOGGING ALLOWED?
CALL ALCSEB ;YES, TRY TO GET ERROR BLOCK
MOVEI T1,0 ;NO LOGGING OR NONE AVAIL
RET
;HERE TO LOG AND RELEASE AN ERROR BLOCK
;P1/ CDB
;P3/ UDB
; CALL ERRFIN
;RETURNS+1(ALWAYS):
;ERROR LOGGING UNDERWAY
ERRFIN::HRRZS UDBERP(P3) ;CLEAR LEFT HALF
SKIPN UDBERP(P3) ;AN ERROR BLOCK?
JRST ERRFN3 ;NO, DONT SAVE ACCUMULATORS
SAVEQ
MOVEI Q1,0 ;CLEAR/GET ERROR BLOCK
EXCH Q1,UDBERP(P3) ; ...
JUMPE Q1,ERRFN3 ;NOTHING TO LOG
CALL PHYBLK ;FIND THE PHYSICAL BLOCK
MOVE Q2,T2 ;SAVE IT FOR CI BAT BLOCKS
MOVE Q3,UDBSTS(P3) ;FIND UNIT TYPE
TXNE Q3,US.CIP ;CI UNIT?
SKIPA T2,[-NCITAB,,CITAB] ;YES. MAKE A DIFFERENT ENTRY
SKIPA T2,[-NCTAB,,CTAB] ;GET THINGS TO COPY
SKIPA Q3,Q2 ;SET LBN FOR HSC COPY
HRL Q3,CDBSTS(P1) ;GET CHANNEL TYPE
HRRZ P3,P3 ;CLEAR OUT ANY FLAGS
MOVE T1,Q1 ;GET ERROR BLOCK
CALL SEBCPY ;AND DO IT
JFCL ;NEVER...
HRLZ T1,UDBADR(P3) ;GET UNIT OFF OF CHANNEL READY
HRR T1,UDBSLV(P3) ;AND SLAVE NUMBER
TRNN P2,-1 ;HAVE A CONTROLLER?
HRRO T1,UDBADR(P3) ;NO, GET GET UNIT NUMBER THIS WAY
MOVE CX,UDBSTS(P3)
TXNN CX,US.CIP ;IF NOT A CI UNIT,
MOVEM T1,SEBDAT+MB%UAD(Q1) ;STORE IN SYSERR BLOCK
CALL SETNAM ;SET UP MB%NAM (IN T1)
MOVE CX,UDBSTS(P3)
TXNN CX,US.CIP ;IF NOT A CI UNIT,
MOVEM T1,SEBDAT+MB%NAM(Q1) ;STORE IN SYSERR BLOCK
MOVX T1,IS.ERR!IS.NRT ;IS THIS A HARD ERROR?
TDNN T1,IRBSTS(P4) ; ?
JRST ERRFN2 ;NO, NO NEED FOR BAT BLOCK LOGIC
MOVX T1,IS.DTE ;YES, GET DATA ERROR FLAG
MOVX T2,US.DSK ;AND DISK FLAG
TDNE T2,UDBSTS(P3) ;IS THIS A DISK?
TDNN T1,IRBSTS(P4) ;AND IS THIS A DATA ERROR?
JRST ERRFN2 ;NO - DONT DO BAT BLOCK LOGIC
MOVE T1,Q1 ;GET ERROR BLOCK AGAIN
TXNE CX,US.CIP ;IS THIS A CI DISK?
SKIPA T2,[-1,,[SEBPTR 0,SBTFNA,HSCBAT]]
MOVE T2,[-1,,[SEBPTR 0,SBTFNA,ERRBAT]]
CALL SEBCPY ;INSERT JOB 0 FUNCTION
JFCL
ERRFN2: MOVE T1,Q1 ;RECOVER ERROR BLOCK
CALL QUESEB
MOVEI T1,MASBGX ;SAY WE ARE REOCRDING A MASSBUS ERROR
CALL GENBLK ;SEE IF STATUS BLOCK NEEDED
ERRFN3: SETZM UDBERR(P3) ;YES - CLEAR STATE INFORMATION
SETZM UDBERC(P3) ; ...
RET ;AND WE ARE DONE
;COPY BLOCK
CTAB: SEBPTR 0,SBTEVC,SEC%MB ;BLOCK TYPE
SEBPTR MB%VID,SBTWD,UDBVID(P3) ;VID
SEBPTR MB%FES,SBTWD,UDBERR(P3) ;FINAL ERROR STATE
SEBPTR MB%UDB,SBTWD,P3 ;UDB - NEEDED FOR BAT BLOCK LOGIC IN JOB 0
SEBPTR MB%IRS,SBTWD,IRBSTS(P4) ;IORB STATUS WORD
SEBPTR MB%TYP,SBTWD,Q3 ;CHANNEL TYPE,,UNIT TYPE
SEBPTR MB%SEK,SBTWD,UDBSEK(P3) ;NUMBER OF SEEKS
SEBPTR MB%RED,SBTWD,UDBRED(P3) ;DATA READ
SEBPTR MB%WRT,SBTWD,UDBWRT(P3) ;DATA WRITTEN
SEBPTR MB%SRE,SBTWD,UDBSRE(P3) ;SOFT READ ERRORS
SEBPTR MB%SWE,SBTWD,UDBSWE(P3) ;SOFT WRITE ERRORS
SEBPTR MB%HRE,SBTWD,UDBHRE(P3) ;HARD READ ERRORS
SEBPTR MB%HWE,SBTWD,UDBHWE(P3) ;HARD WRITE ERRORS
SEBPTR MB%PS1,SBTWD,UDBPS1(P3) ;POSITION 1
SEBPTR MB%PS2,SBTWD,UDBPS2(P3) ;POSITION 2
SEBPTR MB%FEC,SBTWD,UDBERC(P3) ;FINAL ERROR COUNTER
SEBPTR MB%USR,SBTWD,UDBUDR(P3) ;USER DIRECTORY TO LOG
SEBPTR MB%PGM,SBTWD,UDBPNM(P3) ;USER PROGRAM TO LOG
SEBPTR MB%MPE,SBTWD,CDBPAR(P1) ;PAR ERR COUNT
SEBPTR MB%NXM,SBTWD,CDBNXM(P1) ;NXM COUNT
SEBPTR MB%OVR,SBTWD,CDBOVR(P1) ;NUMBER OF OVERRUNS
SEBPTR MB%CAD,SBTWD,CDBADR(P1) ;CHANNEL NUMBER
NCTAB=.-CTAB
;COPY BLOCK FOR CI UNITS
CITAB: SEBPTR 0,SBTEVC,SEC%CI ;BLOCK TYPE
SEBPTR CI%NOD,SBTWD,.SBDSP(P2) ;PORT,,NODE
SEBPTR CI%VID,SBTWD,UDBVID(P3) ;VID
SEBPTR CI%RED,SBTWD,UDBRED(P3) ;SECTORS/FRAMES READ
SEBPTR CI%WRT,SBTWD,UDBWRT(P3) ;SECTORS/FRAMES WRITTEN
SEBPTR CI%PS1,SBTWD,UDBPS1(P3) ;POSITION 1
SEBPTR CI%PS2,SBTWD,UDBPS2(P3) ;POSITION 2
SEBPTR CI%UDB,SBTWD,P3 ;UDB - NEEDED FOR BAT BLOCK LOGIC IN JOB 0
SEBPTR CI%LOC,SBTWD,Q3 ;LINEAR ADDRESS OF BAD BLOCK
NCITAB==.-CITAB
;HERE IN JOB 0 CONTEXT WHEN A HARD ERROR HAS OCCURED ON A DISK.
;THE BAT BLOCK LOGIC MUST BE INVOKED TO PREVENT RE-USE OF THE BAD BLOCK.
SWAPCD ;RUNS IN JOB 0 CONTEXT, MAY BE SWAPPABLE
ERRBAT: MOVE T2,SEBDAT+MB%LOC(T1) ;GET LINEAR ADDRESS FROM ERROR BLOCK
MOVE T1,SEBDAT+MB%UDB(T1) ;GET UDB FROM ERROR BLOCK
CALL BATQ ;MARK BAT BLOCKS, FDB, ETC.
RET
HSCBAT: MOVE T2,SEBDAT+CI%LOC(T1) ;GET LINEAR ADDRESS FROM ERROR BLOCK
MOVE T1,SEBDAT+CI%UDB(T1) ;GET UDB FROM ERROR BLOCK
CALL BATQ ;MARK BAT BLOCKS, FDB, ETC.
RET
RESCD
SUBTTL Statistics Logging Interface
;ROUTINE TO LOG MAGTAPE STATS ON AN UNLOAD
;CALL T1=UDB ADDR
;RETURNS +1(ALWAYS)
LOGUNL::SAVET
MOVEI T2,ST%UNL ;REASON FOR THE ENTRY
; CALLRET LGSTAT ;LOG IT AND RETURN
;ROUTINE TO LOG A STATISTICS ENTRY
;T1/ UDB
;T2/ CODE
; CALL LGSTAT
;RETURNS+1(ALWAYS)
LGSTAT: SAVEP ;SAVE SOME ACS
MOVE P3,T1 ;SET P3=UDB ADDRESS
MOVE P2,T2 ;SET P2=CODE
MOVEI T1,ST%LEN ;TOTAL BLOCK LENGTH
MOVEI T2,ST%SIZ ;NON-STRING DATA SIZE
CALL ALCSEB ;GET SPACE FOR THE REPORT
RET ;NONE AVAILABLE. CHUCK THE MESSAGE
HRRZ P1,UDBCDB(P3) ;SET UP CHANNEL ADDRESS
MOVE P4,T1 ;SAVE LOC OF STATS BLOCK
CAIN P2,ST%UNL ;MAGTAPE ENTRY?
SKIPA T2,[-STAMLN,,STATAB] ;YES. SET FOR THAT BLOCK
MOVE T2,[-STADLN,,STATAB] ;NO. SET FOR A DISK ENTRY
HLL P4,T2 ;SAVE LENGTH FOR LATER
MOVE P5,UDBSTS(P3) ;GET UNIT TYPE
HRL P5,CDBSTS(P1) ;GET CHANNEL TYPE
CALL SEBCPY ;STORE THE STUFF IN THE SYSERR/SPEAR BLOCK
JFCL
CALL SETNAM ;SET T1=ST%NAM
MOVEM T1,SEBDAT+ST%NAM(P4) ;SAVE FOR SYSERR/SPEAR
HRLZ T1,UDBADR(P3) ;GET UNIT OFF OF CHANNEL READY
HRR T1,UDBSLV(P3) ;AND SLAVE NUMBER
HRRZ T2,UDBKDB(P3) ;HAVE A CONTROLLER?
SKIPN T2
HRRO T1,UDBADR(P3) ;NO, GET GET UNIT NUMBER THIS WAY
MOVEM T1,SEBDAT+ST%UAD(P4) ;STORE IN SYSERR BLOCK
HRRZ T1,P4 ;LOC OF BLOCK
CALL QUESEB ;TAKE IT AWAY SYSERR/SPEAR
HRRI P4,STATAB ;START OF TABLE (LENGTH ALREADY IN LH)
ADD P4,BHC+STAZER ;POINT TO FIRST LOC TO CLEAR DOWN
SETZM @(P4) ;CLEAR VOLUME STATISTICS
AOBJN P4,.-1
RET ;AND RETURN TO CALLER
;ROUTINE TO LOG DISK STATISTICS ON A SYSTEM SHUTDOWN
;CALL PHYLOG
;RETURNS +1(ALWAYS)
PHYLOG::SAVEP ;SAVE ACS
MOVSI P6,-CHNN ;SET TO LOOK AT ALL CHANS
PHYLO1: SKIPN P1,CHNTAB(P6) ;CHAN EXIST?
JRST PHYLO2 ;NO, TRY NEXT
CALL DGUMAP ;YES, LOG STATS FOR ITS UNITS
CALL PHYLO3 ;LOG EACH UNIT
PHYLO2: AOBJN P6,PHYLO1 ;KEEP GOING FOR ALL CHANS
RET ;DONE. RETURN
;CALLED FOR EACH UNIT ON A CHANNEL
PHYLO3: MOVX T1,US.DSK ;IS THIS UNIT A DISK?
TDNN T1,UDBSTS(P3)
RET ;NO, DON'T DO ANYTHING
MOVE T1,P3 ;YES, SET UP UDB ADDR WHERE LGSTAT WANTS IT
MOVEI T2,ST%SHT ;REASON FOR ENTRY
CALLRET LGSTAT ;LOG THE STATISTICS AND RETURN
;ROUTINE TO SET UP MB%NAM, ST%NAM
;P3/ UDB
;RETURNS +1(ALWAYS)
;T1/ MAGTAPE UNIT NUMBER, 0 IF A DISK
SETNAM: MOVX T1,US.TAP ;IS THIS A MAGTAPE?
TDNN T1,UDBSTS(P3)
JRST SETNA2 ;NO
MOVE T2,[-MTAN,,MTCUTB] ;YES. COMPUTE INDEX OF UNIT
SETNA1: HRRZ T1,(T2) ;UDB ADDR
CAIN T1,(P3) ;ONE WE'RE LOOKING FOR?
JRST SETNA3 ;YES
AOBJN T2,SETNA1 ;NO, TRY NEXT
SETNA2: TDZA T1,T1 ;CAN'T FIND IT (!)
SETNA3: MOVEI T1,-MTCUTB(T2) ;COMPUTE INDEX FROM AOBJN WORD
RET ;RETURN TO CALLER
STATAB: SEBPTR 0,SBTEVC,SEC%ST ;BLOCK TYPE
SEBPTR ST%COD,SBTWD,P2 ;REASON FOR THIS RECORD
SEBPTR ST%VID,SBTWD,UDBVID(P3) ;VOLUME ID
SEBPTR ST%TYP,SBTWD,P5 ;DEVICE AND CHANNEL TYPE (SEE MB%TYP)
SEBPTR ST%CAD,SBTWD,CDBADR(P1) ;CHANNEL ADDRESS
STAZER==.-STATAB ;FIRST LOC TO CLEAR AFTER COPYING
SEBPTR ST%RED,SBTWD,UDBRED(P3) ;TOTAL READS ON THIS VOLUME
SEBPTR ST%WRT,SBTWD,UDBWRT(P3) ;TOTAL WRITES ON THIS VOLUME
SEBPTR ST%SEK,SBTWD,UDBSEK(P3) ;TOTAL SEEKS ON THIS VOLUME
STADLN==.-STATAB ;LENGTH OF DISK STATISTICS BLOCK
SEBPTR ST%RNR,SBTWD,UDBRNR(P3) ;(MAGTAPE) FRAMES READ ON VOLUME IN NRZI
SEBPTR ST%WNR,SBTWD,UDBWNR(P3) ;(MAGTAPE) FRAMES WRITTEN ON VOLUME IN NRZI
SEBPTR ST%RPE,SBTWD,UDBRPE(P3) ;(MAGTAPE) FRAMES READ ON VOLUME IN PE
SEBPTR ST%WPE,SBTWD,UDBWPE(P3) ;(MAGTAPE) FRAMES WRITTEN ON VOLUME IN PE
SEBPTR ST%RGC,SBTWD,UDBRGC(P3) ;(MAGTAPE) FRAMES READ ON VOLUME IN GCR
SEBPTR ST%WGC,SBTWD,UDBWGC(P3) ;(MAGTAPE) FRAMES WRITTEN ON VOLUME IN GCR
STAMLN==.-STATAB ;LENGTH OF MAGTAPE STATS BLOCK
SUBTTL Internal Start IO Utilities
;HERE TO START IO ON AN IORB
;SHOULD BE CALLED WITH PI OFF IF NOT AT INTERRUPT LEVEL
;P4/ IORB
;P1,2,3 SETUP
; CALL STRTIO
;RETURNS+1:
; IO NOT STARTED, IORB EITHER TERMINATED OR REMAINING IN QUEUES
;RETURNS+2:
; IO STARTED
STRTIO: SETZM CDBIRB(P1) ;NO LONGER HAVE A PREFERENTIAL IORB
SKIPGE IRBSTS(P4) ;SHORT IORB?
JRST STRTI1 ;YES, NEVER AN EXIT ROUTINE
HLRZ T2,IRBIVA(P4) ;GET STRTIO ENTRY ROUTINE
JUMPE T2,STRTI1 ;NONE
MOVE T1,P4 ;COPY IORB FOR CALL
CALL (T2) ;CALL ENTRY ROUTINE
SKIPA ;ABORT
JRST STRTI1 ;NORMAL STARTUP
STRTI0: MOVX T1,US.OIR!US.OMS ;NO LONGER ANY NEED FOR OPER INTERVENTION
ANDCAM T1,UDBSTS(P3) ; ...
CALL OFFTWQ ;REMOVE FROM TWQ
CALL DONIRB ;FLAG AS DONE
RET ;AND EXIT INDICATING REFUSED
STRTI1: MOVE T1,UDBST1(P3) ;GET UNIT STATUS
CAME P4,UDBCHB(P3) ;IS THIS THE HOMEBLOCK CHECKD?
TXNN T1,U1.OFS ;OR NOT FORCED OFFLINE?
SKIPA ;ALL OK TO DO TRANSFER
CALLRET SETOIA ;NOT LEGAL TO TRANSFER DECLARE OFFLINE
MOVE T1,UDBSTS(P3) ;GET STATUS
TXNE T1,US.CIP ;MSCP-CONTROLLED DISK?
JRST STRTI2 ;YES. UNIT/KDB CAN ALREADY BE ACTIVE
MOVX T2,KS.ACT ;AND CONTROLLER ACTIVE BIT
TRNE P2,-1 ;IS THERE A CONTROLLER?
TDNN T2,KDBSTS(P2) ;YES, CONTROLLER ALREADY BUSY?
TXNE T1,US.POS!US.ACT ;OR UNIT ALREADY BUSY?
BUG.(HLT,ILUST1,PHYSIO,HARD,<PHYSIO - Unit status inconsistent at SIO>,,<
Cause: The STRTIO routine was called to start IO on a unit for an IORB, but
the unit or controller status indicated that the unit was already
active. IO should never be started on an active drive.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>) ;YES, ERROR
MOVX T1,CS.AC2 ;CHECK NOT OUT OF PHASE
TDNE T1,CDBSTS(P1) ;BY SEEING IF STACKED COMMAND ACTIVE
BUG.(HLT,ILCHS1,PHYSIO,HARD,<PHYSIO - Illegal channel status at SIO>,,<
Cause: The STRTIO routine was called to begin IO for an IORB, but the channel
status indicated that the channel was already active doing a stacked
command.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>) ;YES, ERROR
STRTI2: MOVX T1,CS.AC1 ;CHANNEL GOING ACTIVE
IORM T1,CDBSTS(P1) ; ...
MOVX T1,KS.ACT ;AND CONTROLLER
TRNE P2,-1 ;IF PRESENT
IORM T1,KDBSTS(P2) ; ...
MOVX T1,US.ACT ;ALSO UNIT
IORM T1,UDBSTS(P3) ; ...
HRRZ T1,UDBAKA(P3) ;GET CURRENT UDB ADDRESS
MOVEM T1,CDBXFR(P1) ;MARK A UNIT HOLDING CHANNEL
CALL SETIO ;SETUP FOR IO
CALL CDSSIO(T1) ;GO START IO
JRST STKIOF ;OFFLINE, CAN'T DO IT
HRRZM P3,CDBLUN(P1) ;REMEMBER UDB OF THE UNIT
RETSKP ;IO STARTED SUCCESSFULLY
STKIOF:
MOVX T1,US.CIP
TDNN T1,UDBSTS(P3) ;IS THIS AN MSCP-CONTROLLED DISK?
JRST STKIF1 ;NO
HRRZ T1,IRBLNK(P4) ;YES, IS THIS THE ONLY IORB ON THE CHAIN?
SKIPN T1 ;IF NOT, DON'T SET UNIT IDLE
STKIF1: CALL CLRACT ;CLEAR CHANNEL AND UNIT ACTIVE BITS
MOVX T1,IS.ERR ;ANY ERRORS OCCURRED?
TDNE T1,IRBSTS(P4) ;CHECK IORB
JRST STRTI0 ;YES, REMOVE IORB FROM QUEUE
SETOIA: CALL SETOIR ;INDICATE OPERATOR NEEDED
MOVX T1,US.CIP ;CHECK FOR CI
TDNN T1,UDBSTS(P3) ;ON THIS UDB
RET ;QUIT NOT CI
CALL OFFTWQ ;PICK UP THE IORB AND PLACE IT ON THE
CALLRET ONFPWQ ;PWQ
;HERE WHEN OPERATOR INTERVENTION REQUIRED
SETOIR: MOVX T1,US.OIR ;SET OPERATOR INTERVENTION BIT
IORM T1,UDBSTS(P3) ;FOR PERIODIC CHECKER
SETZM UDBODT(P3) ;ALSO CLEAR OUT OVERDUE TIMER
RET
;HERE TO STACK A SECOND DATA TRANSFER COMMAND FOR A CHANNEL
;REQUIRES THE USUAL PIOFF OR INTERRUPT LEVEL INTERLOCK
;P4/ IORB
;P1,2,3 SETUP
; CALL STKIO
;RETURNS+1:
; COMMAND NOT STACKED
;RETURNS+2:
; COMMAND STACKED IN CHANNEL
STKIO: SKIPGE IRBSTS(P4) ;SHORT IORB?
JRST STKIO1 ;YES - NO NEED TO CALL EXIT RTN
HLRZ T2,IRBIVA(P4) ;GET SIO EXIT ROUTINE ADDRESS
JUMPE T2,STKIO1 ;IF NONE, ASSUME OK
MOVE T1,P4 ;COPY IORB
CALL (T2) ;CALL EXIT ROUTINE
RET ;SIGNAL FAILURE, WILL TERMINATE AT STRTIO
STKIO1: MOVX T1,CS.AC1 ;GET PRIMARY CHANNEL ACTIVE FLAG
MOVX T2,KS.ACT ;AND CONTROLLER ACTIVE FLAG
TRNE P2,-1 ;DOES A CONTROLLER EXIST?
TDNE T2,KDBSTS(P2) ;YES, THEN IT BETTER BE ACTIVE
TDNN T1,CDBSTS(P1) ;CHANNEL SHOULD BE BUSY ALSO
BUG.(HLT,ILUST5,PHYSIO,SOFT,<PHYSIO - Illegal channel or controller state at STKIO>,,<
Cause: The STKIO routine was called to stack up a second command for a
channel, so that the CDB and KDB (if it exists) should have been marked
as active. However, at least one of them wasn't active.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>) ;WRONG, COMPLAIN
MOVE T1,UDBSTS(P3) ;CHECK ON UNIT STATUS
TXNE T1,US.ACT ;UNIT SHOULD BE ACTIVE
TXNE T1,US.POS ;BUT NOT POSITIONING
BUG.(HLT,ILUST6,PHYSIO,SOFT,<PHYSIO - Illegal unit state at STKIO>,,<
Cause: The STKIO routine was called to stack up a second command for a
channel, but the unit either was not active or was doing positioning.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>) ;OTHERWISE LOSE
MOVX T1,CS.AC2 ;NOW GET SECOND CHANNEL ACTIVE FLAG
TDNE T1,CDBSTS(P1) ;ALREADY BUSY?
BUG.(HLT,ILCHS2,PHYSIO,HARD,<PHYSIO - Illegal channel state at STKIO>,,<
Cause: The STKIO routine was called to set up a second command for a channel,
but the channel status indicated it already had a second command in
progress.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>) ;YES, ERROR
IORM T1,CDBSTS(P1) ;WILL NOW HAVE BOTH ACTIVE
CALL SETIO ;SETUP
CALL CDSSTK(T1) ;CALL LOWER LEVELS
SKIPA T1,[EXP CS.AC2] ;FAILED, GET FLAG READY
RETSKP ;SUCCESSFUL
ANDCAM T1,CDBSTS(P1) ;CLEAR SECOND ACTIVE FLAG
RET ;AND RETURN ERROR
;HERE TO START POSITIONING FOR AN IORB
;P4/ IORB
;P1,3 SETUP
; CALL STRTPS
;RETURN+1:
; POSITIONING NOT STARTED, IORB TERMINATED IF APPROPRIATE
;RETURNS+2:
; POSITIONING STARTED
STRTPS: MOVE T1,UDBST1(P3) ;Get the status
CAME P4,UDBCHB(P3) ;IS THIS THE HOMEBLOCK
TXNN T1,U1.OFS ;OFFLINE?
SKIPA ;ONLINE ALL OK
JRST SETOIR ;NO GO DECLARE OFFLINE
STRPA: HRRZ T1,UDBTWQ(P3) ;CHECK IF POSITIONING LEGAL NOW
MOVX T2,US.ACT ;IF ANY PENDING REQUEST ON CYLINDER
TDNE T2,UDBSTS(P3) ;OR IF UNIT ACTIVE
SKIPN T1 ; ...
SKIPA ;NONE OF THE ABOVE
BUG.(CHK,ILUST2,PHYSIO,HARD,<PHYSIO - Unit status inconsistent at SPS>,,<
Cause: The routine STRTPS was called to begin a positioning request for a
unit, but the status indicated that the unit was already active and the
transfer wait queue was nonempty.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGCHK. If this BUGCHK persists and no
hardware problem can be found, change this BUGCHK to a BUGHLT and send
in an SPR with the dump and how to reprduce the problem.
>)
TRNN P2,-1 ;IS THERE A CONTROLLER?
JRST STRTP1 ;NO
MOVX T1,KS.ACT ;YES
TDNE T1,KDBSTS(P2) ;ALREADY ACTIVE?
BUG.(HLT,ILUST4,PHYSIO,HARD,<PHYSIO - Controller active at SPS>,,<
Cause: The routine STRTPS was called to begin positioning on a unit, but the
controller status indicated it was already busy.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
IORM T1,KDBSTS(P2) ;NO - MAKE IT ACTIVE
STRTP1: MOVX T1,US.ACT!US.POS ;UNIT SOON POSITIONING
IORM T1,UDBSTS(P3) ; ...
CALL SETIO ;SETUP
CALL CDSPOS(T1) ;CALL LOWER LEVEL
JRST STRTPF ;COULDN'T
HRRZM P3,CDBLUN(P1) ;REMEMBER LAST UNIT TALKED TO
RETSKP ;ALL OK
STRTPF: CALL CLRPOS ;CLEAR ACTIVE
MOVX T1,US.TAP ;IS THIS A TAPE LIKE DEVICE?
TDNN T1,UDBSTS(P3) ;???
JRST STRTP2 ;NO
MOVX T1,IS.ERR ;YES - WAS AN ERROR INDICATED?
TDNN T1,IRBSTS(P4) ; ???
JRST STRTP2 ;NO - KEEP IN QUEUES
MOVX T1,US.OIR!US.OMS ;YES - TERMINATE
ANDCAM T1,UDBSTS(P3) ;NO LONGER WAITING FOR OPR
CALL OFFPWQ ;REMOVE FROM PWQ
CALL DONIRB ;POST COMPLETE
RET ;FAIL RETURN
STRTP2: CALLRET SETOIR ;SET OPERATOR INVERVENTION REQ
;AND FAIL RETURN
;HERE TO RESTART SEEKS ON A CHANNEL
;P1/ CDB
; CALL RSTSEK
;RETURNS+1(ALWAYS):
;CLOBBERS P REGISTERS, P2, AND P3
;SHOULD BE CALLED WITH PI OFF
RSTSEK::SAVEQ
CALL DGUMAP ;LOOP OVER ALL UNITS
CALL SCHSEK ;DO THIS FOR EACH ONE
RET ;DONE
;UTILITY TO SET UP FOR IO
;P4/IORB ADDRESS
;P1/CDB
;RETURNS +1 (ALWAYS):
;ERROR BIT CLEARED IN IORB,
;T1/DISPATCH ADDRESS
SETIO:: MOVX T1,IS.ALE ;CLEAR ALL ERROR BITS
ANDCAM T1,IRBSTS(P4)
MOVEI T1,^D25000 ;NO, ALLOW ONLY A FEW SECONDS THEN
ADD T1,TODCLK ;FROM NOW
MOVEM T1,UDBODT(P3) ;AND STORE AS OVERDUE TIME
HRRZ T1,CDBDSP(P1)
RET
;HERE TO CLEAR CHANNEL AND UNIT ACTIVE BITS
CLRACT::MOVX T1,CS.ACT!CS.ERC ;MARK CDB NO LONGER ACTIVE OR IN ERROR RECOVERY
ANDCAM T1,CDBSTS(P1) ; ...
SETOM CDBXFR(P1) ;CLEAR TRANSFERING UDB
CLRPOS: TRNN P2,-1 ;ANY CONTROLLER?
JRST CLRSRC ;NO, SKIP ON
MOVX T1,KS.ACT ;YES, GET ACTIVE BIT
ANDCAM T1,KDBSTS(P2) ;AND CLEAR IT
SETZM KDBACT(P2) ;CLEAR TRANSFERING UDB
CLRSRC: MOVX T1,US.ACT!US.POS ;UNIT IS NO LONGER ACTIVE OR POSITIONING
ANDCAM T1,UDBSTS(P3) ; ...
CLRXIT: SETZM UDBODT(P3) ;ALSO CLEAR TIMEOUT
MOVX T1,US.MRQ ;UNIT WAITING FOR MAINT MODE?
TDNN T1,UDBSTS(P3) ;?
RET ;NO - JUST RETURN
MOVX T2,US.MAI ;YES, SET BIT
IORM T2,UDBSTS(P3) ; ...
ANDCAM T1,UDBSTS(P3) ;NO LONGER REQUESTING
AOS PSKD1 ;POKE SCHED
RET
SUBTTL Seek Scheduler
;SHOULD BE CALLED WITH INTERRUPTS OFF OR AT INTERRUPT LEVEL
;P1/ CDB
;P2/ KDB (IF PRESENT)
;P3/ UDB
; CALL SCHSEK
;RETURNS+1(ALWAYS):
; SEEK STARTED ON THIS UNIT IF APPROPRIATE
; POSITION OP STARTED IF CONTROLLER FREE (SEE SCHPOS COMMENTS)
;USES P4,THE Q'S
;THE ALGORITHM USED IS THAT REFERED TO IN THE LITERATURE AS "SCAN"
;BRIEFLY STATED, THE ALGORITHM SELECTS THE REQUEST TO THE CLOSEST
;HIGHER NUMBERED CYLINDER THAN THE UNITS CURRENT CYLINDER. IF THERE IS
;NO SUCH REQUEST, THE REQUEST TO THE LOWEST NUMBERED CYLINDER IS
;SELECTED. THIS CAUSES THE DISK ARM TO "SCAN" FROM LOWER NUMBERED
;CYLINDERS TO HIGHER NUMBERED CYLINDERS. THE CACM AND IBM SYS. J.
;HAVE MANY DESCRIPTIONS AND WINDY RELIGIOUS DEBATES ON THE SUBJECT.
;NOTE: READS ARE GIVEN PREFERENCE OVER WRITES IN SELECTING THE
; NEXT SEEK CYLINDER. THIS TENDS TO REDUCE SYSTEM SWAP WAIT TIME
; IN THAT A PROCESS IS USUALLY BLOCKED WAITING FOR A READ WHILE
; WRITES USUALLY ORIGINATE WITH GCCOR. ALL TRANSFERS FOR THE
; SELECTED CYLINDER ARE DONE, BOTH READS AND WRITES.
;REGISTER USAGE:
;Q1/ FLAGS,,PREDECESSOR TO ELEMENT UNDER CONSIDERATION
;Q2/ MINIMUM CYLINDER SO FAR,,PREDECESSOR TO MINIMUM ELEMENT
;Q3/ BEST CYLINDER SO FAR,,PREDECESSOR TO BEST ELEMENT
;P4/ CURRENT ELEMENT UNDER CONSIDERATION
;LOCAL FLAGS IN LH(Q1)
SEKF%R==1B0 ;PREFER READS OVER WRITES
SEKF%M==1B1 ;HAVE A READ FOR MIN CYL
SEKF%B==1B2 ;HAVE A READ FOR BEST CYL
SCHSEK::MOVX T1,CS.MRQ!CS.MAI ;CHANNEL IN MAINT MODE?
SKIPN UDBCHB(P3) ;CHECKING HOMEBLOCK?
TDNE T1,CDBSTS(P1) ; ???
RET ;YES - NO NEW ACTIVITY
TRNE P2,-1 ;KDB FOR THIS UNIT?
JRST SCHPOS ;YES - GO WORK ON IT
HRRZ T1,UDBTWQ(P3) ;ANY TRANSFERS PENDING ON CYLINDER?
JUMPN T1,R ;YES - WHY MESS THINGS UP?
MOVEI Q1,UDBPWQ(P3) ;SETUP PREDECESSOR
MOVSI Q2,-1 ;SETUP MINIMUM CYLINDER TO LARGE NUMBER
MOVSI Q3,-1 ;SETUP BEST CYLINDER TO LARGE NUMBER
HRRZ P4,UDBPWQ(P3) ;GET CURRENT HEAD OF PWQ
JUMPE P4,SEKIDL ;IF QUEUE IS NULL, EXIT
SOSG UDBFCR(P3) ;SHOULD READS GET PREFERENCE?
SKIPA T1,[EXP INIFCR] ;NO - ALSO RESET COUNT
TLOA Q1,(SEKF%R) ;YES
MOVEM T1,UDBFCR(P3) ;SAVE NEW VALUE
SEK1: HRRZ T1,UDBDSP(P3) ;GET UNIT DISPATCH
CALL UDSCNV(T1) ;GET CYLINDER FOR THIS REQUEST
LDB T3,IRYFCN ;GET FUNCTION CODE
CAMN T2,UDBPS1(P3) ;SAVE AS CURRENT?
SKIPG UDBFCT(P3) ;YES - "FAIRNESS" COUNT EXHAUSTED?
JRST SEK3 ;CNT EXHAUSTED OR NOT SAME CYL, CHK FOR MIN
HRRZ T1,Q1 ;GET PREDECESSOR
HRRZ T2,P4 ;GET ELEMENT TO BE REMOVED
CALL CONSPW ;SPLICE QUEUE
HRRZ T1,P4 ;GET CURRENT REQUEST
CALL ONTWQ ;AND PLACE ON TWQ
SEK2: HRRZ P4,IRBLNK(Q1) ;ADVANCE CURRENT REQUEST
JUMPN P4,SEK1 ;IF ONE PRESENT, CONSIDER IT.
HRRZ T1,UDBTWQ(P3) ;END OF QUEUE, ANYTHING IN TWQ?
JUMPN T1,R ;YES - DONT DISTURB POSITION.
HLRZ T1,Q3 ;GET BEST CYLINDER FOUND
CAIN T1,-1 ;FOUND ANY REQUESTS TO HIGHER CYLINDERS?
MOVE Q3,Q2 ;NO - RESET SCAN AT MINIMUM
HRRZ T1,Q3 ;GET REQUEST DECIDED ABOVE
HRRZ T2,IRBLNK(T1) ; ACTUAL ELEMENT
HRRZ P4,T2 ;COPY NEW CURRENT IORB
CALL CONSPW ;SPLICE QUEUE
MOVE T1,P4 ;SHUFFLE TO HEAD OF PWQ
CALL ONFPWQ ; ...
MOVE T1,UDBSTS(P3) ;GET UNIT STATUS
TXNE T1,US.OIR!US.OMS!US.MAI!US.MRQ ;WAITING FOR OPERATOR?
RET ;YES, DO NOTHING
TXNE T1,US.POS!US.ACT ;UNIT IDLE?
BUG.(HLT,ILUST3,PHYSIO,HARD,<PHYSIO - SCHSEK - Impossible unit status>,,<
Cause: The SCHSEK routine was called to start a position request for a unit,
but the status of the unit indicated it was not idle. SCHSEK should
only be called when a unit becomes inactive.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>) ;NO, COMPLAIN
CALL STRTPS ;START POSITIONING
JFCL ;COULDNT POSITION THIS UNIT, OPERATOR NEEDED
RET
SEK3: JUMPGE Q1,SEK3B ;READ PREFERENCE?
CAIE T3,IRFRVC ;YES - IS IT READ VALID
CAIN T3,IRFRED ;OR A READ?
JRST [TLON Q1,(SEKF%M) ;YES, SET/TEST THAT WE HAVE READ NOW
JRST SEK3C ;NO - TAKE THIS REQUEST
JRST SEK3B] ;YES - SEE IF THIS REQUEST IS BETTER
SEK3A: TLNE Q1,(SEKF%M) ;NOT A READ - DO WE HAVE A READ NOW?
JRST SEK4 ;YES
SEK3B: HLRZ T1,Q2 ;GET MINIMUM CYLINDER FOUND SO FAR
CAML T2,T1 ;THIS REQUEST LESS THAN MINIMUM?
JRST SEK4 ;NO
SEK3C: HRRZ Q2,Q1 ;YES - SAVE PREDECESSOR
HRL Q2,T2 ;AND NEW MINIMUM CYLINDER
SEK4: CAMG T2,UDBPS1(P3) ;THIS REQUEST GREATER THAN UNIT CURRENT?
JRST SEK5 ;NO
JUMPGE Q1,SEK4B ;READ PREFERENCE?
CAIE T3,IRFRED ;YES - IS THIS A READ?
CAIN T3,IRFRVC ;OR A READ VERIFY
JRST [TLON Q1,(SEKF%B) ;YES - SET/TEST DO WE HAVE A READ NOW?
JRST SEK4C ;NO - USE THIS REQUEST
JRST SEK4B] ;YES - CHECK IF THIS REQUEST IS BETTER
SEK4A: TLNE Q1,(SEKF%B) ;NOT A READ - DO WE HAVE A READ NOW?
JRST SEK5 ;YES
SEK4B: HLRZ T1,Q3 ;GET CURRENT BEST CYLINDER
CAML T2,T1 ;BETTER? (LESS)
JRST SEK5 ;NO - CONTINUE SEARCH
SEK4C: HRRZ Q3,Q1 ;YES - SAVE PREDECESSOR
HRL Q3,T2 ;SAVE NEW BEST CYLINDER
SEK5: HRR Q1,P4 ;ADVANCE POINTER
JRST SEK2 ;AND CONTINUE SCAN
;HERE WHEN UNIT HAS NO MORE POSITION REQUESTS
SEKIDL: MOVEI T1,INIFCR ;RESET READ PREFERENCE COUNT
MOVEM T1,UDBFCR(P3) ; ...
RET
;HERE TO SCHEDULE A POSITION OPERATION ON A UNIT WHICH IS A SUBUNIT
;OF A CONTROLLER TYPE DEVICE. THE POSITION AND TRANSFER OPERATIONS
;ARE SCHEDULED ROUND ROBIN AMONG THE DEVICES ON THE CONTROLLER.
;UNLIKE A DISK WHERE A SINGLE UNIT'S QUEUES DETERMINE WHETHER
;TO SEEK/NOT SEEK, THE UNITS OTHER THAN THE CURRENT ONE MUST BE
;SCANNED FIRST ON A CONTROLLER.
;THE CURRENT UNIT'S POSITION WAIT QUEUE IS MOVED TO ITS TWQ IF
;(AND AS FAR AS) IT IS APPROPRIATE. THE REQUESTS FOR A PARTICULAR
;DEVICE MUST BE FINISHED IN THE ORDER SUBMITTED.
SCHPOS: MOVX T1,KS.ACT ;IS THE CONTROLLER FREE?
TDNE T1,KDBSTS(P2) ; ???
RET ;NO - NOTHING TO DO NOW
POS1: HRRZ P4,UDBPWQ(P3) ;GET HEAD OF PWQ
JUMPE P4,POS2 ;IF NONE, JUST SCAN OTHER UNITS
HRRZ T1,UDBDSP(P3) ;GET UNIT DISPATCH
CALL UDSPRQ(T1) ;DOES THIS REQUEST REQUIRE POSITIONING?
SKIPA ;NO - TRANSFER IT TO UNITS TWQ
JRST POS2 ;YES - TRY OTHER UNITS
CALL OFFPWQ ;PULL REQUEST FROM PWQ
CALL ONTWQ ;APPEND TO TWQ
JRST POS1 ;AND CHECK AGAIN
POS2: MOVE Q1,KDBCUN(P2) ;GET CURRENT LOOP POINTER
JRST POS5 ;AND START WITH NEXT UNIT
POS3: SKIPN P3,(Q1) ;IS THERE A UNIT PRESENT?
JRST POS4 ;NO
MOVX T1,US.ACT!US.POS!US.REW!US.OIR!US.OMS!US.MAI!US.MRQ
TDNE T1,UDBSTS(P3) ;IS THIS UNIT AVAILABLE?
JRST POS4 ;NO - KEEP LOOKING
HRRZ P4,UDBTWQ(P3) ;DOES THIS UNIT HAVE ANY TRANSFER REQS?
JUMPN P4,R ;YES - LET TRANSFER SCHEDULER DO IT
HRRZ P4,UDBPWQ(P3) ;ARE THERE ANY POSITION REQUESTS?
JUMPE P4,POS4 ;NO
MOVEM Q1,KDBCUN(P2) ;YES - SAVE CURRENT UNIT POINTER
CALL STRTPS ;TRY TO START IT
JRST POS5 ;FAILED - SEE IF ANYTHING ELSE
RET ;ALL DONE
POS4: CAMN Q1,KDBCUN(P2) ;BACK TO ORIGINAL UNIT?
RET ;YES - IDLE
POS5: AOBJN Q1,POS3 ;LOOP
MOVE Q1,KDBIUN(P2) ;WRAP AROUND THE UNIT NUMBERS
JRST POS3 ;AND LOOP
SUBTTL Channel Scheduler
SCHXFR::MOVE T1,CDBSTS(P1) ;GET STATUS
TXNE T1,CS.CIP!CS.MRQ!CS.MAI!CS.ERC ;CHANNEL IN MAINT MODE? OR CI?
RET ;YES - NO NEW ACTIVITY
SOSLE CDBFCT(P1) ;CHECK "FAIRNESS" COUNT
JRST SCHLTM ;NOT TIME TO ROUND ROBIN, DO LAT OPT
TXNE T1,CS.AC1 ;IS CHANNEL NOW ACTIVE?
RET ;YES - WAS A POSSIBLE COMMAND STACK REQ
MOVEI T1,INIFCX ;RESET COUNT
MOVEM T1,CDBFCT(P1) ; ...
MOVE Q1,CDBCUN(P1) ;CONTINUE SCAN FROM LAST ACTIVE UNIT AND REL IT
SKIPE P3,(Q1) ;CHECK FOR UNIT EXISTANCE
JRST [ LDB T1,USYBKT ;GET BLOCK TYPE
CAIE T1,.BTUDB ;IS IT A UDB?
JRST XFR0 ;NO FORGET IT
MOVE T1,UDBDSP(P3) ;RELEASE PORT
CALL UDSPRL(T1) ;RELEASE PORT
JRST XFR0]
XFR0: MOVE Q1,CDBCUN(P1) ;CONTINUE SCAN FROM LAST ACTIVE UNIT
JRST XFR3
XFR1: SKIPN P3,(Q1) ;ANY SUCH UNIT?
JRST XFR2 ;NO - CONTINUE SCAN
LDB T1,USYBKT ;GET BLOCK TYPE
CAIE T1,.BTUDB ;UDB?
JRST XFR4 ;SCAN KDB
HRRZ P2,UDBKDB(P3) ;GET KDB IF ANY
HRRZ P4,UDBTWQ(P3) ;GET REQUEST
JUMPE P4,XFR2 ;NOTHING - CONTINUE SCAN
MOVE T1,UDBSTS(P3) ;GET STATUS
TXNE T1,US.OIR!US.OMS!US.MAI!US.MRQ!US.REW!US.ACT ;AVAILABLE?
JRST XFR2 ;NO - CONTINUE SCAN
CALL XFRX ;ATTEMPT TO START IO
JRST XFR3 ;COULDNT - TRY ANOTHER UNIT
RET ;ALL OK - RETURN
;HERE TO ATTEMPT TO START IO WHEN A REQUEST IS FOUND
XFRX: MOVEM Q1,CDBCUN(P1) ;SETUP CURRENT UNIT POINTER
CALLRET STRTIO ;START IO ON THIS IORB
XFR2: CAMN Q1,CDBCUN(P1) ;BACK TO ORIGINAL UNIT?
JRST XFRIDL ;YES - NOTHING TO DO, CHANNEL IDLE
XFR3: AOBJN Q1,XFR1 ;ADVANCE UNIT POINTER
MOVE Q1,CDBIUN(P1) ;WRAPAROUND
JRST XFR1 ;CONTINUE SCAN
;HERE WHEN A CHANNEL GOES IDLE
XFRIDL: MOVEI T1,INIFCX ;RESET "FAIRNESS" COUNT
MOVEM T1,CDBFCT(P1) ; ...
RET ;AND RETURN
;HERE TO SCAN A KDB FOR UDBS WITH WORK
XFR4: MOVE P2,P3 ;COPY KDB
MOVX T1,KS.ACT ;IS IT FREE?
TDNE T1,KDBSTS(P2) ; ???
JRST XFR2 ;NO - MOVE ALONG
MOVE Q2,KDBCUN(P2) ;GET POINTER
JRST XFR7 ;ENTER BELOW
XFR5: SKIPN P3,(Q2) ;UNIT PRESENT?
JRST XFR6 ;NO - TRY NEXT
HRRZ P4,UDBTWQ(P3) ;ANY REQUESTS?
JUMPE P4,XFR6 ;NO - TRY AGAIN
MOVX T1,US.ACT!US.POS!US.REW!US.OIR!US.OMS!US.MAI!US.MRQ
TDNE T1,UDBSTS(P3) ;IS THE UNIT AVAILABLE?
JRST XFR6 ;NO - CONTINUE SCAN
MOVEM Q2,KDBCUN(P2) ;YES - UPDATE POINTER
CALL XFRX ;ATTEMPT START IO
JRST XFR7 ;COULDNT - TRY AGAIN ON ANOTHER UNIT
RET ;OK.
XFR6: CAMN Q2,KDBCUN(P2) ;BACK TO STARTING UNIT?
JRST XFR2 ;YES - CONTINUE CHANNEL SCAN
XFR7: AOBJN Q2,XFR5 ;NEXT UNIT AND LOOP
MOVE Q2,KDBIUN(P2) ;RESET TO START OF TABLE
JRST XFR5 ;AND LOOP
;HERE TO DO DISK LATENCY OPTIMIZATION
;REGISTER USAGE:
; Q1/ UDB OF BEST IORB,,LATENCY OF BEST IORB SO FAR (MICROSECONDS)
; Q2/ PREDECESSOR OF BEST IORB,,BEST IORB
; Q3/ AOBJN POINTER TO UDB TABLE IN EITHER THE CDB OR KDB
; P6/ NONZERO IF NON-DISKS FOUND ON THE CHANNEL
SCHLTM: MOVX T1,CS.AC1 ;PRIMARY COMMAND ACTIVE?
TDNE T1,CDBSTS(P1) ; ???
JRST SCHSTK ;YES - SEE IF WE SHOULD STACK ANOTHER
MOVEI Q1,777777 ;NIL UDB,,LARGE INITIAL BEST LATENCY
SETZB Q2,P6 ;INITIALIZE BEST IORBS AND NON-DISKS COUNT
MOVE Q3,CDBIUN(P1) ;GET AOBJN POINTER
LTM1: SKIPN P3,(Q3) ;UNIT EXIST?
JRST LTM3 ;NO
LDB T1,USYBKT ;YES, GET BLOCK TYPE
CAIN T1,.BTUDB ;IS IT A UDB?
JRST LTM2 ;YES, GO CHECK IT
MOVE T1,KDBSTS(P3) ;IT'S A KDB, GET STATUS
TXNN T1,KS.DSK ;THIS CONTROLLER FOR A DISK?
AOJA P6,LTM3 ;NO, COUNT IT AND LOOK SOME MORE
TXNE T1,KS.ACT ;YES, IS THE CONTROLLER FREE?
JRST LTM3 ;NOPE, SKIP LOOKING AT IT THEN
MOVE P2,P3 ;MOVE KDB ADDRESS TO RIGHT AC
PUSH P,Q3 ;SAVE CURRENT AOBJN POINTER
MOVE Q3,KDBIUN(P2) ;GET AOBJN POINTER TO ITS UNITS
LTM4: SKIPN P3,(Q3) ;UNIT EXIST?
JRST LTM6 ;NO, GO EXAMINE NEXT ONE
CALL LTMUNI ;YES, COMPUTE BEST IORB FOR IT
JRST [ POP P,Q3 ;FOUND PREFERED IORB, RESTORE AC
JRST LTM7] ;AND GO USE IT
LTM6: AOBJN Q3,LTM4 ;LOOP OVER ALL UNITS
POP P,Q3 ;RESTORE OLD AOBJN POINTER
JRST LTM3 ;AND CONTINUE LOOKING FOR UNITS OF CDB
LTM2: MOVEI P2,0 ;NO KDB EXISTS
CALL LTMUNI ;COMPUTE BEST IORB FOR THIS UNIT
JRST LTM7 ;FOUND PREFERED IORB, GO USE IT
LTM3: AOBJN Q3,LTM1 ;LOOP OVER ALL UNITS
LTM7: JUMPE Q2,LTM5 ;IF NO DISK TRANSFERS FOUND, CHECK FOR TAPES
HLRZ P3,Q1 ;GET BEST UDB
HRRZ P2,UDBKDB(P3) ;AND CORRESPONDING KDB IF ANY
HLRZ T1,Q2 ;GET PREDECESSOR TO BEST IORB
HRRZ T2,Q2 ;GET BEST IORB
MOVE P4,T2 ; ...
MOVE CX,UDBSTS(P3) ;GET STATUS
CALL CONSTW ;PULL FROM TWQ
MOVE T1,P4 ;GET IORB
CALL ONFTWQ ;PLACE AT HEAD OF TWQ
CALL STRTIO ;ATTEMPT TO START IO
JRST XFR0 ;FAILURE - REGRESS TO ROUND ROBIN
MOVX T1,CS.STK ;CHANNEL SUPPORT COMMAND STACKING?
TDNN T1,CDBSTS(P1) ; ???
RET ;NO - DONE
JRST STK1 ;YES - ENTER COMMAND STACK SCHEDULER
LTM5: JUMPN P6,XFR0 ;IF FOUND ANY TAPES, TRY ROUND ROBIN
JRST XFRIDL ;NOTHING TO DO, NOW IDLE
;HERE FOR EACH UDB FOUND. THE UNIT IS CHECKED TO SEE IF IT IS AVAILABLE,
;AND IF SO, THE IORB WITH THE BEST LATENCY ON THE UNIT IS FOUND, AND
;COMPARED WITH THE BEST OVERALL ON ALL UNITS. IF BEST SO FAR, THE IORB
;AND UDB ARE REMEMBERED IN Q1 AND Q2. CALL:
; P1/ CDB
; P2/ KDB, OR 0 IF NONE
; P3/ UDB
; Q1-Q3/ CURRENT BEST IORBS
; P6/ FLAG FOR NON-DISKS
;RETURNS:
; +1: IORB WAS FOUND WHICH IS PREFERED (WAS THE ONE IN CDBIRB)
; +2: NORMAL TYPE IORBS EXAMINED
LTMUNI: HRRZ T1,UDBTWQ(P3) ;ANYTHING ON THE TRANSFER WAIT QUEUE?
JUMPE T1,RSKP ;NO, RETURN
MOVE T1,UDBSTS(P3) ;GET STATUS OF THE UNIT
TXNE T1,US.OIR!US.OMS!US.MAI!US.MRQ!US.REW!US.ACT!US.POS
RETSKP ;UNIT NOT AVAILABLE
TXNN T1,US.DSK ;IS UNIT A DISK?
AOJA P6,RSKP ;NO, ADVANCE COUNTER AND RETURN
MOVEI T1,MINLAT ;MINIMUM ACCEPTABLE LATENCY
PUSH P,P6 ;SAVE COUNTER
HRRZ T2,UDBDSP(P3) ;GET UNIT DISPATCH
CALL UDSLTM(T2) ;GET BEST TRANSFER ON THIS UNIT
BUG.(HLT,PHYLTF,PHYSIO,HARD,<PHYSIO - SCHLTM - Unexpected LATOPT failure>,,<
Cause: The routine SCHLTM was called to do disk latency optimization, by
scanning all units for the best IORB. A unit was found to have a
nonnull transfer wait queue, but the lower level code to select the
best IORB for that unit gave the non-skip return, indicating that no
IORBs existed.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
; T1/ LATENCY IN USEC (0 MEANS PREFERED IORB)
; T2/ PRED. TO BEST IORB
; T3/ BEST IORB
POP P,P6 ;RESTORE COUNTER
CAIL T1,(Q1) ;BETTER THAN CURRENT BEST?
RETSKP ;NO, LOOK AT NEXT UNIT
MOVE Q1,T1 ;YES - SAVE AS CURRENT BEST TIME
HRL Q1,P3 ;SAVE BEST UDB
MOVE Q2,T3 ;SAVE BEST IORB
HRL Q2,T2 ;SAVE PREDECESSOR TO BEST IORB
JUMPN T1,RSKP ;SKIP RETURN IF NOT PREFERRED IORB
RET ;RETURN NON-SKIP FOR SPECIAL IORB
;HERE TO DECIDE IF A SECOND COMMAND SHOULD BE STARTED TO THIS CHANNEL
;THOSE CHANNELS (RH20) WHICH SUPPORT A COMMAND STACK CAN BE RUN AT
;THEORETICAL BANDWIDTH ON A PER PAGE BASIS.
;FOR THE PRESENT, ONLY THE CURRENTLY ACTIVE UNIT IS SCANNED FOR
;A REQUEST TO STACK. A REQUEST WILL BE STACKED ONLY IF ITS LATENCY
;IS BETWEEN MINLTS AND MINLAT + (TIME TO TRANSFER ONE PAGE).
SCHSTK: MOVX T1,CS.STK ;SET UP FOR TEST
TDNE T1,CDBSTS(P1) ;DOES THIS CHANNEL SUPPORT COMMAND STACKING?
SKIPGE P3,CDBXFR(P1) ;AND IS THERE A CURRENTLY TRANSFERING UNIT?
RET ;NO
ADDI P3,CDBUDB(P1) ;DOUBLE INDEX
MOVE P3,(P3) ;TO GET UDB/KDB
LDB T1,USYBKT ;GET BLOCK TYPE
SETZ P2, ;ASSUME NO KDB NEEDED
CAIN T1,.BTUDB ;IS IT A UDB?
JRST STK0 ;YES, PROCEED
MOVE P2,P3 ;WAS REALLY A KDB, COPY ADDRESS
MOVE T1,UDBSTS(P3) ;GET STATUS
SKIPE P3,KDBACT(P2) ;GET CURRENTLY ACTIVE SLAVE
TXNN T1,US.DSK ;AND VERIFY THIS IS A DISK DEVICE
RET ;NOT ACTIVE OR NOT A DISK
STK0: MOVE T1,UDBSTS(P3) ;GET STATUS
TXNE T1,US.CHB ;DON'T DO STACKING ON HOMEBLOCKS
RET
HRRZ P4,UDBTWQ(P3) ;GET CURRENT HEAD OF TWQ
STK1: HRRZ P4,IRBLNK(P4) ;CHECK TO SEE IF MORE
JUMPE P4,R ;THAN ONE REQUEST
MOVX T1,SF%FLO ;TEST GLOBAL "FULL LATENCY OPT" ENABLE
TDNN T1,FACTSW ; OK?
RET ;NO
MOVEI T1,0 ;YES - FLAG STACK LATOPT, ASSUMES DISK
; IS JUST AFTER CURRENT PAGE
HRRZ T2,UDBDSP(P3) ;GET UNIT TRANSFER VECTOR
CALL UDSLTM(T2) ;COMPUTE BEST LATENCY
RET ;NO STACKABLE REQUEST
CAILE T1,MINLAT ;WILL IT BE LESS THAN MINLAT?
RET ;NO - WAIT UNTIL CURRENT TRANSFER DONE
DMOVE T1,T2 ;YES - GET PRED IN T1, BEST IN T2
MOVE P4,T2 ;SAVE BEST IORB
CALL CONSTW ;SPLICE IT OUT OF TWQ
MOVE T1,P4 ;GET IORB AGAIN
CALL ONSTWQ ;MOVE TO SECOND POSITION ON TWQ
CALL STKIO ;STACK COMMAND
JFCL ;NOTHING TO DO ABOUT IT
RET
SUBTTL Routines To Lock And Unlock IO Pages
;IOLOCK - CALLED TO LOCK DOWN A CONTIGUOUS BLOCK OF USER PAGES AND RETURN
;A LIST OF THE PHYSICAL PAGES USED. (ONLY USE NOW IS TO ALLOW MULTI-PAGE
;DSKOPS TO WORK). THE RETURNED LIST IS PHYSICALLY CONTIGUOUS, AND IS
;TERMINATED BY AN EXTRA ZERO WORD. CALLER MUST BE NOINT.
;ARGUMENTS:
; T1/ ADDRESS OF USER'S BUFFER
; T2/ SIZE OF BUFFER IN WORDS
; T3/ NONZERO IF PAGES WILL BE WRITTEN INTO
;RETURNS:
; +1: FAILURE, ERROR CODE IN T1
; +2: SUCCESS
; T1/ ADDRESS OF STORAGE CONTAINING LIST OF PAGES, WHERE THE
; FIRST WORD OF THE BLOCK IS AN AOBJN POINTER TO THE LIST
IOLOCK::ASUBR <IOLADR,IOLRES,IOLFLG,IOLCNT> ;ALLOCATE STORAGE
SKIPLE T2 ;SIZE MUST BE POSITIVE
CAILE T2,CCWMAX*PGSIZ ;BUT NOT TOO LARGE
RETBAD(DSKOX5) ;NO, FAIL
MOVE T3,T1 ;COPY ADDRESS
ADDI T3,-1(T2) ;COMPUTE LAST ADDRESS IN BUFFER
TLNN T1,777740 ;VERIFY BEGINNING ADDRESS IS REASONABLE
TLNE T3,777740 ;AND ENDING ADDRESS IS TOO
RETBAD(DSKOX6) ;NOPE, FAIL
LSH T1,-PGSFT ;CONVERT ARGUMENTS TO PAGE NUMBERS
LSH T3,-PGSFT ;SO CAN COMPUTE PAGE COUNT
SUBM T3,T1 ;GET DIFFERENCE
ADDI T1,1 ;CREATE NUMBER OF PAGES TO DO
MOVEM T1,IOLCNT ;REMEMBER COUNT
ADDI T1,2(T1) ;DOUBLE COUNT SO CAN GUARANTEE CONTIGUOUS LIST
HRLI T1,.RESP1 ;NO SPECIAL PRIORITY
MOVX T2,RS%SE0!.RESGP ;USE GENERAL STORAGE POOL
CALL ASGRES ;GET SOME FREE CORE
RETBAD() ;FAILED
MOVEM T1,IOLRES ;REMEMBER STORAGE ADDRESS
MOVEI T2,1(T1) ;GET POSSIBLE STORAGE ADDRESS FOR CCWS
ANDI T2,PGSIZ-1 ;KEEP ONLY OFFSET WITHIN PAGE
ADD T2,IOLCNT ;CREATE LAST OFFSET NEEDED
CAIGE T2,PGSIZ ;IF LIST WAS HERE, WOULD IT FIT ON ONE PAGE?
TDZA T2,T2 ;YES, SET UP TO USE THIS FIRST HALF
MOVE T2,IOLCNT ;NO, THEN SECOND HALF WILL BE CONTIGUOUS
ADDI T2,1(T1) ;COMPUTE ADDRESS WHERE LIST WILL GO
MOVN T3,IOLCNT ;NEGATE PAGE COUNT
HRL T2,T3 ;FINISH AOBJN POINTER
MOVEM T2,0(T1) ;SAVE IN FIRST WORD OF STORAGE BLOCK
; .. ;FALL INTO LOOP
;LOOP OVER ALL PAGES, LOCKING THEM DOWN AND REMEMBERING THE PAGE NUMBERS:
IOLLOP: MOVEM T2,IOLCNT ;SAVE CURRENT AOBJN WORD
MOVE T1,IOLADR ;GET CURRENT USER ADDRESS
SKIPN IOLFLG ;WRITING FROM THE PAGE?
XCTU [SKIP (T1)] ;YES, VERIFY THE PAGE EXISTS
ERJMP IOLFAI ;REFERENCE FAILED
SKIPE IOLFLG ;READING INTO THE PAGE?
XCTU [SETMM (T1)] ;YES, VERIFY PAGE IS WRITABLE
ERJMP IOLFAI ;NOPE, FAILED
TXO T1,1B0 ;INDICATE FROM USER MODE
CALL MLKMA ;LOCK THE PAGE
MOVE T2,IOLCNT ;GET BACK AOBJN POINTER
MOVEM T1,0(T2) ;PUT PAGE NUMBER INTO STORAGE LIST
MOVEI T1,PGSIZ ;GET SIZE OF A PAGE
ADDM T1,IOLADR ;UPDATE USER ADDRESS FOR NEXT LOOP
AOBJN T2,IOLLOP ;LOOP OVER ALL PAGES
MOVE T1,IOLRES ;ALL DONE, GET STORAGE ADDRESS BACK
RETSKP ;SKIP RETURN
;HERE IF ONE OF THE PAGES CANNOT BE REFERENCED. UNLOCK ALL PAGES
;AND GIVE AN ERROR.
IOLFAI: MOVE T1,IOLRES ;GET ADDRESS OF STORAGE BLOCK
SETZM T2 ;DON'T MARK PAGES AS BEING WRITTEN
CALL IOPNLK ;UNLOCK ALL PAGES IN THE LIST
MOVE T1,LSTERR ;GET ERROR CAUSED BY THE PAGE REFERENCE
RETBAD() ;AND RETURN THAT
;IOLCCW - ROUTINE TO CONVERT A LIST OF PHYSICAL PAGE NUMBERS INTO A LIST
;OF CCW WORDS. CALL:
; P1/ CDB ADDRESS
; T1/ ADDRESS OF STORAGE FOR PAGE LIST
; T2/ USER ADDRESS
; T3/ SIZE OF BUFFER IN WORDS
;RETURNS:
; +1: ALWAYS
IOLCCW::STKVAR <IOLOFS,IOLSIZ,IOLAOB> ;ALLOCATE STORAGE
SKIPL T1,0(T1) ;GET AOBJN POINTER TO PAGE LIST
RET ;NONE, RETURN
MOVEM T1,IOLAOB ;REMEMBER IT FOR LATER
ANDI T2,PGSIZ-1 ;KEEP ONLY THE OFFSET INTO THE USER PAGE
MOVEM T2,IOLOFS ;SAVE FOR LATER
MOVEM T3,IOLSIZ ;AND SAVE SIZE OF BUFFER
IOLCLP: MOVEI T1,PGSIZ ;GET SIZE OF A PAGE
SUB T1,IOLOFS ;SUBTRACT OFFSET TO GET WORDS REMAINING IN PAGE
CAMLE T1,IOLSIZ ;REMAINING BUFFER LESS THAN THAT?
MOVE T1,IOLSIZ ;YES, REDUCE WORD COUNT
MOVN T2,T1 ;GET READY
ADDM T2,IOLSIZ ;DECREMENT WORDS LEFT IN THE BUFFER
HRLI T1,IRMWRD ;WANT WORD MODE
MOVE T2,IOLAOB ;GET POINTER TO CURRENT LIST ELEMENT
MOVE T2,0(T2) ;THEN GET PHYSICAL PAGE NUMBER
LSH T2,PGSFT ;CONVERT INTO ADDRESS
IOR T2,IOLOFS ;FINISH THE ADDRESS BY ADDING IN OFFSET
HRRZ T3,CDBDSP(P1) ;GET CHANNEL DISPATCH ADDRESS
HRRZ T3,CDSCCW(T3) ;AND THEN CCW ROUTINE
CALL (T3) ;TRANSLATE ADDRESS AND COUNT INTO CCW VALUE
MOVE T2,IOLAOB ;GET BACK AOBJN WORD
MOVEM T1,(T2) ;STORE CCW WORD BACK INTO THE LIST
AOBJP T2,R ;RETURN IF DID ALL WORDS
MOVEM T2,IOLAOB ;MORE TO DO, SAVE UPDATED AOBJN WORD
SETZM IOLOFS ;OFFSET IS NOW ZERO
JRST IOLCLP ;GO DO NEXT PAGE
;IOCNLK AND IOPNLK - ROUTINES TO UNLOCK A LIST OF PAGES AND RETURN THE
;RESIDENT STORAGE. USE IOPNLK IF LIST IS PAGE NUMBERS, OR USE IOCNLK IF
;THE LIST IS CCW WORDS. MUST BE CALLED NOINT. CALL:
; P1/ CDB ADDRESS IF CALLING IOCNLK
; T1/ ADDRESS OF LIST OF PAGES
; T2/ NONZERO IF PAGES WERE WRITTEN INTO
;RETURNS:
; +1: ALWAYS
IOCNLK::HRRZ T3,CDBDSP(P1) ;GET DISPATCH ADDRESS FOR CHANNEL
MOVE T3,CDSCCA(T3) ;THEN GET ROUTINE TO EXTRACT ADDRESS FROM CCW
TXOA T3,IFIW ;MAKE SURE INDIRECT WORKS IN SECTION 1
IOPNLK::SETZ T3, ;OR INDICATE NO ROUTINE TO CALL
SKIPL T4,(T1) ;GET AOBJN POINTER TO LIST
CALLRET RELRES ;NONE THERE, JUST RELEASE STORAGE
ASUBR <IOURES,IOUFLG,IOUCCW,IOLAOB> ;REMEMBER ARGUMENTS
IOUNLP: MOVEM T4,IOLAOB ;SAVE UPDATED AOBJN WORD
SKIPN T1,(T4) ;OBTAIN NEXT ELEMENT FROM LIST IF ANY
JRST IOUNXT ;NONE THERE
SKIPE T2,IOUCCW ;NEED TO CONVERT CCW TO PAGE NUMBER?
CALL (T2) ;YES, FIRST EXTRACT ADDRESS FROM CCW
SKIPE IOUCCW ;WELL?
LSH T1,-PGSFT ;YES, TURN ADDRESS INTO PAGE NUMBER
JUMPE T1,IOUNXT ;IF ZERO, NOTHING TO DO
SKIPE IOUFLG ;WAS PAGE WRITTEN INTO?
CALL MRKMPG ;YES, MARK IT AS BEING MODIFIED
CALL MULKCR ;THEN UNLOCK THE PAGE
IOUNXT: MOVE T4,IOLAOB ;GET BACK AOBJN WORD
AOBJN T4,IOUNLP ;LOOP FOR NEXT ELEMENT
MOVE T1,IOURES ;UNLOCKED EVERYTHING, GET BACK ADDRESS
CALLRET RELRES ;RELEASE STORAGE BLOCK AND RETURN
SUBTTL UDSKIO and MDSKIO
;UDSKIO AND MDSKIO - GENERAL NON-PAGE ALIGNED DISK I/O ROUTINES. USED
;FOR SPECIAL DISK I/O SUCH AS READING HOME BLOCKS, BAT BLOCKS, AND
;THE DSKOP JSYS. CALL:
; T1/ PHYSICAL DISK ADDRESS (SECTOR NUMBER)
; T2/ FLAGS,,WORD COUNT (FLAG DOP%WR MEANS WRITE)
; T3/ PHYSICAL MEMORY ADDRESS (OR ADDRESS OF LIST OF CCW WORDS FOR MDSKIO)
; T4/ IF 1B0 SET IN T2: CKU NUMBER OF UNIT FOR I/O
; IF 1B0 CLEAR IN T2: STRUCTURE NUMBER
;RETURNS: +1: ALWAYS
; T1/ ZERO IF SUCCESSFUL, ERROR BITS IF I/O FAILED
;
;RESTRICTIONS: MDSKIO CAN CROSS ARBITRARY PAGE BOUNDARIES, BUT THE
;TOTAL NUMBER OF WORDS READ/WRITTEN MUST BE AN EXACT MULTIPLE OF THE
;DISK SECTOR SIZE. MDSKIO ALSO CANNOT DO ERROR RECOVERY OR ERROR LOGGING.
;UDSKIO CAN READ PARTIAL SECTORS, AND DOES ERROR RECOVERY AND LOGGING,
;BUT THE I/O CANNOT CROSS A PAGE BOUNDARY. ALSO FOR WRITES, THE COUNT
;IS MODIFIED SO THAT AN EXACT MULTIPLE OF DISK SECTORS IS WRITTEN (THIS
;IS NECESSARY TO PREVENT PARITY ERRORS FROM THE CHANNEL). THEREFORE,
;TO WRITE OUT THE HOME AND BAT BLOCKS, IT IS NECESSARY TO BEGIN THE
;WRITE AT THE TOP OF A PAGE SO THAT THE TRANSFER WON'T TRY TO GO OFF
;THE END OF THE PAGE FOR AN RP20.
MDSKIO::SAVEPQ ;SAVE ACCUMULATORS
SKIPL Q3,0(T3) ;GET AOBJN WORD TO CCW LIST
JRST UIOILA ;NONE, THEN FAIL
JRST UIO1 ;PROCEED
UDSKIO::SAVEPQ ;SALT AWAY ACCUMULATORS
SETZM Q3 ;SAY NO LIST EXISTS
UIO1: STKVAR <IRBSAV> ;SAVE IRB COUNT
SETZM IRBSAV ;CLEAR IRB COUNT FLAG
DMOVE P5,T2 ;SAVE FLAGS, COUNT, AND MEMORY ADDRESS
CALL GETIRB ;GET IORB+CCW BLOCK IN P4, WAIT IF NEEDED
MOVEM T1,IRBADR(P4)
HRRZM P5,IRBCNT(P4) ;STORE COUNT IN IORB
MOVEI T1,IRFRED ;SEE IF READ OR WRITE
TXNE P5,DOP%WR ; ...
MOVEI T1,IRFWRT ;IS WRITE.
DPB T1,IRYFCN ;STORE IN IORB
MOVEI T1,IRMWRD ;WORD MODE
DPB T1,IRYMOD ;STORE IN IORB
MOVEI T1,0 ;COPY INHIBIT ERR LOG OR RECOVERY BITS
TXNE P5,DOP%IR ;INHIBIT ERROR RECOVERY?
TXO T1,IS.IER ;YES, INHIBIT IT
TXNE P5,DOP%IL ;INHIBIT ERROR LOGGING?
TXO T1,IS.IEL ;YES
SKIPE Q3 ;CALLED AT MDSKIO?
TXO T1,IS.IER!IS.IEL ;YES, DISABLE ERROR RECOVERY AND LOGGING
IORM T1,IRBSTS(P4) ;STORE IN IORB
MOVEI T1,0 ;NO SIO EXIT NEEDED UNLESS
TXNE P5,DOP%EO ;USER ASKED FOR ERROR ON OFFLINE
MOVEI T1,UDISIE ;CALLER WANTS ERROR
HRLM T1,IRBIVA(P4) ;STORE EXIT OR NOT
JUMPGE P5,[CALL FIXIRB ;FIX IRB ADDRESS IF DOP%PS
MOVEM T2, IRBSAV ;SET IRB ADJUSTED FLAG
MOVE T1,IRBADR(P4);MASK EXTRANEOUS BITS
TLZ T1,DSKMSK
TXO T1,DSKAB ;SET DISK ADDRESS BIT
MOVEM T1,IRBADR(P4)
CALL GETCUB ;IF STRUCTURE ADDRESS, COMPUTE UNIT ADDRESS
JRST UIOILX ;IT WAS ILLEGAL
SKIPE IRBSAV ;DID WE FIXUP IRB?
JRST [ MOVE T2,IRBSAV ;GET SAVED ADDRESS
ANDI T2,3 ;GET LOW ORDER BITS
LSH T1,2 ;BUILD REAL ADDRESS AGAIN
IOR T1,T2
MOVEM T1,IRBADR(P4) ;SAVE UNIT RELATIVE ADDRESS
JRST UIO2]
MOVEM T1,IRBADR(P4) ;SAVE UNIT RELATIVE ADDRESS
JRST UIO2] ;AND PROCEED WITH P1, P2, AND P3 SET UP
MOVE T1,T4 ;WANTS PHYSICAL UNIT, COPY CKU NUMBER
CALL CKUNPK ;UNPACK THEM
CALL CHKCKU ;VERIFY A LEGAL UNIT WAS SELECTED
JRST UIONUN ;NOPE, FAIL
MOVE P3,T1 ;COPY UDB ADDRESS
HRRZ P2,UDBKDB(P3) ;SET UP KDB POINTER
HRRZ P1,UDBCDB(P3) ;AND CDB POINTER
MOVSI T1,DSKMSK ;INVALID BITS IN DISK ADDRESS
TXNE P5,DOP%PS ;CHECK FOR PHYSICAL STRUCTURE
MOVSI T1,DSKMSK*4 ;LARGER SIZE IS LEGAL
ANDCAB T1,IRBADR(P4) ;CLEAR THE BITS AND GET DISK ADDRESS
HRRZ T2,UDBSIZ(P3) ;GET POINTER TO SIZE TABLES
MOVE T3,TRECPP(T2) ;CHECK SECTORS EQUAL TO TRUE SECTORS
CAME T3,SECPAG(T2) ;LEGAL?
LSH T1,-2 ;NO DIVIDE BY 4
CAML T1,SECUNT(T2) ;LEGAL DISK ADDRESS SPECIFIED?
JRST UIOILA ;NOPE, FAIL
UIO2: TXNN P5,DOP%EO ;WANT ERROR ON OFFLINE?
JRST UIO3 ;NO, PROCEED
MOVE T1,UDBSTS(P3) ;YES, GET UNIT STATUS
MOVE T2,CDBSTS(P1) ;AND CHANNEL STATUS
TXNN T1,US.OFS!US.CHB ;UNIT OFFLINE?
TXNE T2,CS.OFL ;OR CHANNEL OFFLINE?
JRST UIOUFL ;YES, RETURN ERROR
UIO3: HRRZ Q2,UDBSIZ(P3) ;SET UP POINTER TO UNIT SIZE TABLE
MOVE Q1,P5 ;SAVE STATUS
TXNN P5,DOP%WR ;WRITING?
JRST UIO5 ;NO, CAN SKIP ON
MOVEI T1,PGSIZ ;GET SIZE OF PAGE
TXNE P5,DOP%PS ;CHECK FOR PHYSICAL STRUCTURE
JRST [ IDIV T1,TRECPP(Q2) ;GET TRUE SECTORS PER PAGE
JRST UIO4]
IDIV T1,SECPAG(Q2) ;COMPUTE SIZE OF A SECTOR
UIO4: TRNN P5,-1(T1) ;WRITING PARTIAL SECTOR?
JRST UIO5 ;NO, SKIP ON
SKIPE Q3 ;CALLED AT MDSKIO?
JRST UIONDS ;YES, ERROR IF NOT EXACT SECTOR SIZE
IORI P5,-1(T1) ;INCREMENT COUNT TO JUST BELOW NEXT SECTOR
HRRI P5,1(P5) ;THEN TURN INTO EXACT MULTIPLE OF A SECTOR
HRRZM P5,IRBCNT(P4) ;UPDATE COUNT IN IORB TOO
MOVE T1,P6 ;COPY MEMORY ADDRESS
ANDI T1,PGSIZ-1 ;LEAVE ONLY THE OFFSET INTO THE PAGE
ADDI T1,(P5) ;ADD IN NEW COUNT
CAILE T1,PGSIZ ;TRYING TO DO I/O OFF THE PAGE?
JRST UIOOPB ;YES, FAIL
UIO5: MOVE T1,IRBADR(P4) ;GET DISK ADDRESS OF BEGINNING OF TRANSFER
MOVE T2,Q1 ;GET FLAGS
MOVE Q1,T1
TXNE T2,DOP%PS ;CHECK FOR PHYSICAL SECTOR ADDRESSING
JRST [ MOVX T2,IRBPAD ;GET PHYSICAL BIT
IORM T2,IRBADR(P4) ;SET IN THE ADDRESS
ANDCAM T2,T1 ;GET RID OF PHYSICAL BIT INCASE IT WAS SET
MOVE T2,TRECPP(Q2) ;PHYSICAL AND LOGICAL THE SAME?
CAME T2,SECPAG(Q2)
LSH T1,-2 ;NO FORM A GOOD ADDRESS
MOVE Q1,T1 ;SAVE CORRECT ADDRESS
JRST .+1]
IDIV T1,SECCYL(Q2) ;COMPUTE CYLINDER THIS SECTOR IS ON
MOVE T2,IRBCNT(P4) ;GET WORD COUNT
MOVEI T3,PGSIZ ;SIZE OF A PAGE
IDIV T3,SECPAG(Q2) ;COMPUTE SECTOR SIZE FOR UNIT
ADDI T2,-1(T3) ;ROUND UP PARTIAL SECTORS
IDIV T2,T3 ;COMPUTE NUMBER OF SECTORS I/O IS FOR
ADD T2,Q1 ;ADD ORIGINAL SECTOR TO THIS
SOS T2 ;FINALLY GET DISK ADDRESS OF END OF TRANSFER
IDIV T2,SECCYL(Q2) ;COMPUTE CYLINDER THIS SECTOR IS ON
CAME T1,T2 ;WOULD WHOLE TRANSFER BE ON SAME CYLINDER?
JRST UIOILA ;NO, FAIL
JUMPE Q3,UIO6 ;SKIP ON IF CALLED AT UDSKIO
HRRZM Q3,IRBXFL(P4) ;STORE FIRST CCW WORD ADDRESS AS HEAD
HLRE T1,Q3 ;EXTRACT NEGATIVE LENGTH OF CCW LIST
SUBM Q3,T1 ;COMPUTE END OF CCW LIST
HRLM T1,IRBXFL(P4) ;STORE ADDRESS AS TAIL
SETZM IRBLEN(P4) ;CLEAR NORMAL CCW LOCATION SINCE NOT USED
JRST UIO7 ;PROCEED
UIO6: MOVEI T1,IRBLEN(P4) ;BUILD TAIL,,HEAD OF CCW LIST
HRLI T1,IRBLEN+1(P4) ; ...
MOVEM T1,IRBXFL(P4) ;STORE
DMOVE T1,P5 ;RETRIEVE WORD COUNT AND PHYSICAL ADDRESS
HRLI T1,IRMWRD ;INSERT WORD MODE
HRRZ T3,CDBDSP(P1) ;GET DISPATCH BASE
CALL CDSCCW(T3) ;BUILD CCW INTO T1
MOVEM T1,IRBLEN(P4) ;STORE AS FIRST WORD OF CCW LIST
UIO7: SETZM IRBLEN+1(P4) ;CLEAR SECOND WORD OF CCW LIST
MOVEI T1,UDIINT ;INTERRUPT ROUTINE TO CALL
HRRM T1,IRBIVA(P4) ;STORE IN IORB
MOVE T1,P4 ;GET IORB FOR STARTING IO
MOVE T2,P3 ;ALSO GET UDB
NOSKED ;PREVENT INTERRUPTIONS
CALL PHYSIO ;START THE IO
OKSKED
UIO9: MOVEI T1,UDWDON ;WAIT FOR DONE
HRL T1,P4 ;ON THIS IORB
PDISMS ; AS A PAGE FAULT
MOVE T1,IRBSTS(P4) ;EXAMINE STATUS BITS
TXNN T1,IS.DON ;CONDITION SATISFIED?
JRST UIO9 ;NO - BLOCK AGAIN
TXNE T1,IS.ERR ;ANY ERRORS?
JRST UIOCK0 ;YES FIX ERRORS
MOVEI T1,0 ;NO - RETURN 0
UIOXIT: CALLRET GIVIRB ;RELEASE THIS IORB
UIOCK0: TXNN T1,IS.DVE!IS.DTE ;DATA OR DRIVE ERRORS?
IFSKP. ;[7352]
HRROI T1,DKOP06 ;[7352]Device or data error occurred
JRST UIOXIT ;[7352]Release the IORB
ENDIF. ;[7352]
HLRZ T1,IRBIVA(P4) ;[7352]Assume offline, report as an error?
SKIPE T1 ;[7352]No, indicate success
UIOUFL: HRROI T1,DKOP07 ;[7352]Yes, report the error
JRST UIOXIT ;[7352]Release the IORB
;HERE WITH P5 FLAGS,P4 IORB,T4 STRUCTURE NUMBER
;IF FIXUP REQUIRED T2 CONTAINS THE UNFIXED ADDRESS
;RETURNS +2 IF NO FIXUP REQUIRED
;RETURNS +1 IF FIXUP REQUIRED
FIXIRB: TXNN P5,DOP%PS ;CHECK FOR PHYSICAL STRUCTURE
RETSKP ;RETSKPURN NOT A PS REQUEST
SKIPN T2,STRTAB(T4) ;IS THERE A STRUCTURE?
RETSKP ;NO JUST RETSKPURN IT WILL BE CAUGHT LATER
MOVE T2,SDBUDB(T2) ;GET A UDB POINTER
HRRZ T2,UDBSIZ(T2) ;GET THE SIZE POINTER TABLE
MOVE CX,SECPAG(T2) ;GET THE NUMBER OF SECTORS PER PAGE
CAMN CX,TRECPP(T2) ;DIFFERENT SIZE?
RETSKP ;NO ALL OK
MOVE T1,IRBADR(P4) ;GET THE ADDRESS
MOVE T2,T1 ;COPY ADDRESS
LSH T1,-2 ;MAKE IT LOOK GOOD
MOVEM T1,IRBADR(P4)
RET ;RETURN FIXUP REQUIRED
;HERE FOR VARIOUS UDSKIO ERRORS.
;THE ERROR IS RETURNED IN THE RIGHT HALF OF T1, AND -1 IN THE LEFT HALF.
;(BUT CURRENT CALLERS ONLY CHECK FOR A NONZERO OR NEGATIVE RESULT).
UIOILX: HRROI T1,DKOP01
JRST UIOXIT ;QUIT
UIOOPB: HRROI T1,DKOP02
JRST UIOXIT
UIONUN: HRROI T1,DKOP03
JRST UIOXIT
UIOILA: HRROI T1,DKOP04
JRST UIOXIT
UIONDS: HRROI T1,DKOP05 ;NON DISK ERROR CODE (-1,,PC)
JRST UIOXIT
;HERE JUST BEFORE SIO OF UDSKIO REQUEST
;CHECK IF UNIT OFFLINE
UDISIE: MOVX T1,US.OFS!US.CHB ;UNIT ACCESSABLE
TDNE T1,UDBSTS(P3) ; ???
JRST UDISI1 ;OFFLINE
MOVX T1,U1.OFS ;CHECK FOR FORCED OFFLINE
TDNN T1,UDBST1(P3)
RETSKP ;ALL OK TO TRANSFER
UDISI1: MOVX T1,IS.ERR!IS.NRT ;NO, GET ERROR BITS
IORM T1,IRBSTS(P4) ;STORE INTO IORB
RET ;FAIL RETURN
;HERE AT INTERRUPT LEVEL WHEN REQUEST COMPLETED
UDIINT: AOS PSKD1 ;FLAG SCHEDULER
RET
; ALTERNATE ENTRY TO GETIRB THAT WILL RETURN +1 FOR NO IORB AND +2 FOR SUCCESS
;
GETIRC: SKIPN UIOLST ;CHECK FOR A FREE ENTRY
RET ;RETURN FAILURE NO MORE ROOM
AOS (P) ;PROVIDE SKIP RETURN
JRST GETICC
;HERE TO GET AN IORB FROM THE POOL
; CALL GETIRB
;RETURNS+1(ALWAYS):
;P4/ IORB + CCW BLOCK (LENGTH UIOLEN)
GETIRB: SKIPN NSKED ;NOSKED?
JRST GETIR1 ;NO - USUAL CASE
SKIPN UIOLST ;YES - ANY LEFT
BUG.(HLT,UIONIR,PHYSIO,HARD,<UDSKIO - No IORB for NOSKED fork>,,<
Cause: The routine UDSKIO was called to do special I/O for a fork, and to do
the I/O it uses one of a group of preallocated IORBs. There were no
free IORBS left, and the fork could not block because it was NOSKED.
Action: Field Service should check the system. It is unlikely that a software
problem could cause this BUGHLT.
>)
GETICC: PIOFF
MOVE P4,@UIOLST ;GET SUCCESSOR
EXCH P4,UIOLST ;NOW HEAD OF LIST
JRST GETIR2 ;CLEAR IORB AND RETURN
GETIR1: PIOFF ;INTERLOCK LIST MANIPULATION
SKIPN UIOLST ;LIST NONNULL?
JRST GETIR3 ;NO.
SKIPN P4,@UIOLST ;TEST/GET SUCCESSOR
JRST GETIR3 ;NO SUCCESSOR - FORCE BLOCK
EXCH P4,UIOLST ;NEW HEAD OF LIST
GETIR2: PION ;RELEASE PROCESSOR
SETZM 0(P4) ;CLEAR FIRST WORD OF BLOCK
MOVS CX,P4 ;BUILD BLT POINTER
HRRI CX,1(P4) ; ...
BLT CX,UIOLEN-1(P4) ;CLEAR BLOCK
RET
GETIR3: PION ;WE MUST BLOCK
CALL UDIWAT ; ...
JRST GETIR1 ;AND TRY AGAIN
;SCHEDULER TEST ROUTINE, WAITS FOR IORB DONE BIT
UDWDON::MOVX T2,IS.DON ;CHECK DONE BIT
TDNN T2,IRBSTS(T1) ;IN IORB
JRST 0(T4) ;STILL WAITING
JRST 1(T4) ;ALL DONE
;HERE WHEN THE IORBS ARE IN USE. WAIT FOR THEM TO BECOME FREE
UDIWAT: SAVET ;SAVE ARGUMENTS
UDIWT1: MOVEI T1,UDITST ;WAIT FOR FREE IORB
MDISMS ;ORDINARY BLOCK - MAY BE LONG TERM
RET ;FREE, LOCK ACQUIRED
;SCHEDULE TEST TO WAIT FOR IORB
UDITST: SKIPE T1,UIOLST ;LIST NON NULL
SKIPN (T1) ;AT LEAST 2 FREE?
JRST 0(T4) ;NO
JRST 1(T4) ;YES
;HERE TO RELEASE AN IORB TO THE FREE LIST
GIVIRB: ;RETURN AN IORB
CAIL P4,UDIORB ;IS IORB LEGAL?
CAILE P4,<UDIORB-1+<NUIORB*UIOLEN>> ;LEGAL?
BUG. (HLT,BADIRB,PHYSIO,SOFT,<Bad IORB passed to GIVIRB>,,<
Cause: An IORB was passed to GIVIRB that does not have a legal address. This
indicates a software problem in the monitor.
>)
PIOFF
EXCH P4,UIOLST ;NEW HEAD OF LIST
MOVEM P4,@UIOLST ;STORE FOREWARD LINK
PION
RET
SUBTTL PAGEM Interface
;HERE TO TRANSFER A PAGE
;T1/ CPN ;1B0 ON IF WRITE
; CALL DSKIO, DRMIO
;RETURNS+1(ALWAYS)
DSKIO::
DRMIO:: PUSH P,P4 ;SAVE P4, IORB MUST BE IN P4 FOR IRYFCN
PUSH P,T1 ;SAVE T1 FOR PAGEM
MOVX T2,DWRBIT ;COPY WRITE BIT TO CST3 FOR PAGEM
AND T2,T1 ; ...
HRRZ P4,T1 ;GET ONLY RIGHT HALF OF T1
IORM T2,@CST3X+P4 ; ...
MOVEI P4,CST5(T1) ;PUT IORB ADDRESS IN P4
MOVX T2,IS.SHT ;FLAG AS SHORT IORB
MOVEM T2,IRBSTS(P4) ;INITIALIZE IORB
MOVEI T2,IRFRED ;SET IORB FUNCTION
TXNN T1,DWRBIT ;[7.1015] WRITE?
IFSKP. ;[7.1015] Yes
MOVEI T2,IRFWRT ;[7.1015] First, set up write bit
CALL ISOCSH ;[7.1015] (T1/)Is OFN which owns page cached?
BUG.(HLT,TCSOFN,PHYSIO,SOFT,<Transfer of cached OFN page>,,<
Cause: An attempt has been made to transfer a core page to disk. However,
this page belongs to a cached OFN and this should not happen.
Action: Submit an SPR along with the dump and any information that might be
helpful.
Trace the stack and locate the caller. All callers should be aware of
cached OFN pages and take appropriate action to insure that these pages
are not transfered.
>) ;[7.1015] It is cached - error!
ENDIF. ;[7.1015]
DPB T2,IRYFCN ;STORE IN IORB
MOVE T1,P4 ;COPY IORB ADDRESS
CALL PHYSIO ;NOTE - ALREADY NOSKED
POP P,T1 ;RESTORE T1
POP P,P4 ;RESTORE P4
RET
;HERE TO QUEUE A LIST OF PAGES FOR SWAPPER
;T1/ DWRBIT,,FIRST PAGE CST INDEX
; CALL DXXIOM
;RETURNS+1(ALWAYS):
; WHOLE LIST STARTED
DSKIOM::
DRMIOM::PUSH P,P4 ;SAVE VARIABLE FOR POINTER
IOMNXT: HRRZ T2,T1 ;GET RIGHT HALF OF T1 FOR INDEXING
HRRZ P4,@CST3X+T2 ;GET FORWARD LINK
HLLZS @CST3X+T2 ;CLEAR FORWARD LINK IN MEMORY
CALL DRMIO ;INSERT REQUEST
JUMPE P4,IOMXIT ;WAS LINK NULL
HRR T1,P4 ;COPY (NOTE: DWRBIT IS STILL IN LH(T1))
JRST IOMNXT ;LOOP
IOMXIT: POP P,P4 ;RESTORE
RET
DRMINI::SKIPG DRUMP ;[7.1117]
TDZA T1,T1 ;NO DRUMS UNLESS DRUMP .GT. 0
MOVE T1,DRMNUM ;GET NUMBER OF DRUMS FROM RS4INI
MOVEM T1,NPDRMS ;STORE FOR REST OF WORLD
RET
SUBTTL Operator Intervention, Restart and Timeout
;ENTERED FROM SCHEDULER WHEN PHYTIM GT TODCLK.
PHYCHK::SAVEPQ ;SAVE ACCUMULATORS
MOVEI T1,^D1000 ;UPDATE NEXT CALL
MOVEM T1,PHYTIM ; ...
AOS T1,PHYSEC ;INCREMENT LOCAL ONCE A MINUTE TIMER
CAILE T1,^D59 ;AND IF EXPIRED,
SETZM PHYSEC ;WRAPAROUND
CHK1:
MOVSI Q1,-CHNN ;LOOP OVER ALL CHANNELS
CHK2: SKIPN P1,CHNTAB(Q1) ;IS THIS CHANNEL PRESENT?
JRST CHK3 ;NO - TRY NEXT
MOVX T1,CS.OFL!CS.MAI ;CHANNEL OFFLINE OR IN MAINTENENCE MODE?
TDNE T1,CDBSTS(P1) ;OR HAVE NO UNITS?
JRST CHK3 ;YES - IGNORE IT.
HRRZ T1,CDBDSP(P1) ;GET CHANNEL DISPATCH
CALL CDSCHK(T1) ;AND CALL PERIODIC CHECKER
CALL DGUMAP ;FOR EACH UNIT,
CALL UNICHK ;DO CHECK CODE
CHK3:
AOBJN Q1,CHK2 ;AND LOOP FOR ALL CHANNELS
RET ;DONE
;HERE IF THE HOME BLOCK CHECK IORB IS DONE.
CHK8: SAVEQ ;SAVE A FEW REGISTERS
MOVE T1,IRBSTS(P4) ;ANY ERRORS?
CALL GIVIRB ;RETURN THE IORB
SETZM UDBCHB(P3) ;CLEAR IORB FLAG
TXNE T1,IS.ERR
JRST CHK21 ;YES - COMPLAIN
HRRZ Q1,UDBSTR(P3) ;GET STR
SKIPGE UDBSTR(P3) ;GET STR UNIT IS IN
TDZA Q1,Q1 ;UNIT NO LONGER IN STR
MOVE Q1,STRTAB(Q1) ;GET SDB
MOVE T1,UDBNAM(P3) ;CHECK HOME BLOCK NAME AND CODE
MOVE T2,UDBCOD(P3) ;GET HOMCOD (SYMBOL? )
CAMN T1,[SIXBIT /HOM/] ;BLOCK NAME GOOD?
CAIE T2,CODHOM ;BLOCK CODE GOOD?
JRST CHK20 ;NO TO EITHER
HRRZ T3,UDBLUN(P3) ;CHECK IF SAME UNIT
CAILE T3,MXSTRU ;LESS THAN MAXIMUM?
JRST CHK20 ;NO
MOVE T1,UDBSNM(P3) ;CHECK STRUCTURE NAME
MOVE T2,UDBMID(P3) ;AND "UNIQUE" ID
JUMPE Q1,CHK11 ;SEE IF OPR MOVED PACK IF UDB NOT IN A STR
CAMN T1,SDBNAM(Q1) ;SAME NAME?
CAME T2,SDBPUC(Q1) ;SAME CODE?
JRST CHK11 ;NO TO EITHER
ADDI T3,SDBUDB(Q1) ;YES - GET POINTER TO UDB
HRRZ T1,(T3) ;GET UDB
HLRZ T2,UDBLUN(P3) ;GET NUMBER OF UNITS
CAMN T1,P3 ;SAME UNIT AS THIS?
CAME T2,SDBNUM(Q1) ;SAME TOTAL NUMBER?
JRST CHK20 ;NO TO EITHER
CHK9: MOVX T1,U1.STC ;STATUS CHANGED
TDNE T1,UDBST1(P3) ;DURING HOMEBLOCK CHECK?
JRST CHK10 ;YES DON'T CHANGE CHECK FLAG SO WE DO IT AGAIN....
MOVX T1,US.OMS ;SEEMS TO MATCH, PREVENT ANY
IORM T1,UDBSTS(P3) ;DEADLOCK
MOVX T1,US.CHB ;NO LONGER NEED CHECKING, ALLOW I/O
ANDCAB T1,UDBSTS(P3) ; ...
TXNN T1,US.CIP ;CI DISK?
JRST CHK10 ;NO, CARRY ON
SETOM QUEREQ ;YES. TELL MSCP DRIVER TO RESTART A DISK
HRRZ P1,UDBCDB(P3)
SETOM CDBQRQ(P1) ;ON THIS CHANNEL
MOVX T1,US.OIR!US.OMS ;TURN OF MESSAGES
ANDCAM T1,UDBSTS(P3)
CHK10: IOPION
RET ;AND DO USUAL TIMER THING
;HERE WHEN WE READ A GOOD HOME BLOCK WHICH DOESN'T MATCH WHAT SHOULD HAVE BEEN READ
;CHECK ALL UDBS IN SYSTEM, SEARCHING FOR A MATCH
;IF WE FIND A MATCH, THE OPERATOR HAS MOVED THE UNIT
; FROM WHERE IT WAS TO WHERE WE JUST FOUND IT
CHK11: MOVSI P4,-STRN ;SET TO LOOP OVER ALL STRS
SAVEAC <P1> ;SAVE DESTROYED P1 REGISTER
CHK12: SKIPN P5,STRTAB(P4) ;GET NEXT STR
JRST CHK19 ;THIS ONE ISNT THERE
CAMN T1,SDBNAM(P5) ;NAMES MATCH?
CAME T2,SDBPUC(P5) ;AND SAME CODE?
JRST CHK19 ;NO, TEST NEXT STR
ADDI T3,SDBUDB(P5) ;YES, POINT AT RIGHT UDB
HLRZ T2,UDBLUN(P3) ;GET TOTAL NUMBER OF PACKS IN STR
HRRZ T1,(T3) ;POINT T1 AT UDB
CAME T2,SDBNUM(P5) ;YES. RIGHT NUMBER OF UNITS?
JRST CHK20 ;NO. WRONG UNIT POWERED UP. COMPLAIN
;THE PACK WHICH WAS FORMERLY ON THE T1-UDB HAS SPUN UP ON THE P3-UDB
MOVSI T2,-MOVTLN ;NUMBER OF ITEMS TO SWITCH BETWEEN UDBS
CHK13: MOVE T3,@MOVTAB(T2) ;GET AN ITEM FROM ONE UDB
EXCH T1,P3
EXCH T3,@MOVTAB(T2) ;AND SAVE IT IN THE OTHER UDB
EXCH T1,P3
MOVEM T3,@MOVTAB(T2) ;EXCHANGE THE DATA FROM OTHER UDB
AOBJN T2,CHK13 ;KEEP GOING FOR ALL ITEMS
MOVE T2,UDBSTS(P3)
TXNE T2,US.CIP ;CI DISK?
JRST CHK15
CHK13A: MOVSI T2,-MOVQLN ;NUMBER OF QUEUES TO SWITCH BETWEEN UDBS
CHK14: MOVE T3,@MOVTQ1(T2) ;QUEUE HEADER
TRNN T3,-1 ;EMPTY?
MOVSI T3,@MOVTQ2(T2) ;YES, INITIALIZE
MOVE T4,@MOVTQ2(T2) ;OTHER UDBS QUEUE
TRNN T4,-1 ;EMPTY?
MOVSI T4,@MOVTQ1(T2) ;YES
MOVEM T3,@MOVTQ2(T2) ;RESTORE UDBS
MOVEM T4,@MOVTQ1(T2)
AOBJN T2,CHK14 ;KEEP ON FOR ALL QUEUES
CHK15: MOVX T4,US.TPD ;CHECK FOR TPD
TDNE T4,UDBSTS(P3) ;IS IT SET?
JRST CHK17A
HRRZ T3,UDBLUN(P3) ;UNIT NUMBER WITHIN STR
HRRZ T2,UDBSTR(P3) ;STR NUMBER
HRRZ T2,STRTAB(T2) ;STR DATA BLOCK
ADD T2,T3 ;SDBUDB SLOT FOR THIS UNIT
SKIPGE T3,UDBSTR(T1) ;STR NUMBER FOR THIS UNIT
JRST CHK16 ;GO IF IT WASNT IN A STR
HRRZS T3, ;MASK OFF UNIT NUMBER
MOVE T3,STRTAB(T3) ;STR DATA BLOCK
HRLI T3,-MXSTRU ;SET TO SEARCH SDBUDB
HRRZ T4,SDBUDB(T3) ;UDB
CAIE T4,(P3) ;RIGHT?
AOBJN T3,.-2 ;NO, TRY NEXT
JUMPGE T3,CHK16 ;NO MATCH IF T3 POSITIVE (SHOULDN'T HAPPEN)
HRRM T1,SDBUDB(T3) ;SAVE UDB IN SDB
CHK16: HRRM P3,SDBUDB(T2) ;SAVE OTHER UDB IN ITS SDB
CHK17A: MOVE T2,UDBSTS(T1)
TXNN T2,US.CIP ;CI DISK?
JRST CHK17 ;NO
TXZ T2,US.OMS ;YES. DON'T BUG THE OPERATOR ABOUT THE OLD DRIVE
MOVEM T2,UDBSTS(T1)
MOVE T3,UDBSTS(P3) ;IS THIS A CI DISK TOO?
TXNN T3,US.CIP
JRST CHK17 ;NO FORGET IT TRY IT THE OTHER WAY
CALL TW2PWQ ;RESET QUEUE'S FOR CI DISKS
JRST CHK18 ;KEEP ON GOING
CHK17: MOVX T2,US.POS!US.ACT!US.BAT!US.BLK!US.PRQ
MOVE T3,UDBSTS(T1) ;GET PACK-RELATED STATUS BITS
AND T3,T2 ; FROM 1 UDB
ANDCAM T2,UDBSTS(T1) ;AND SWITCH THEM WITH BITS FROM THE OTHER UDB
MOVE T4,UDBSTS(P3)
AND T4,T2
ANDCAM T2,UDBSTS(P3) ;LEAVING DRIVE-RELATED BITS ALONE
IORM T3,UDBSTS(P3)
IORM T4,UDBSTS(T1)
CHK18: MOVX T2,U1.SOF ;[7.1063]Get mask of bits to switch
;[7.1063]Note: To switch bits just add
;[7.1063]them to the mask here
MOVE T3,UDBST1(T1) ;[7.1063]Load flag word from old UDB
AND T3,T2 ;[7.1063]Save current bit state in T3
ANDCAM T2,UDBST1(T1) ;[7.1063]And clear them in old UDB
MOVE T4,UDBST1(P3) ;[7.1063]Load flag word from new UDB
AND T4,T2 ;[7.1063]Save current bit state in T4
ANDCAM T2,UDBST1(P3) ;[7.1063]And clear them in new UDB
IORM T3,UDBST1(P3) ;[7.1063]Now switch the bit states
IORM T4,UDBST1(T1) ;[7.1063] in the two UDBs
MOVE P1,T1 ;[7.1063]Save old UDB
MOVX T1,US.TPD ;CHECK FOR THREE PORT
TDNE T1,UDBSTS(P3) ;IS IT?
JRST CHK99 ;YES FORGET IT
; IFN CFSCOD,<
MOVE T1,P3 ;NEW UDB
MOVE T2,P1 ;OLD UDB
CALL CFRDSN ;TELL CFS THE PACK HAS SWITCHED
; > ;IFN CFSCOD
CHK99: HRROI T1,[ASCIZ /
%Unit switched on device: /]
CALL UNIMES ;TELL OPR ABOUT THE SWITCH
SKIPGE UDBSTR(P1) ;WAS OTHER UNIT IN A STR?
JRST CHK9 ;NO, FINISH UP
EXCH P1,P3 ;YES, POINT AT OTHER UDB
HRROI T1,[ASCIZ / with: /]
CALL UNIMES ;TELL OPR THAT WE SWITCHED THIS ONE TOO
EXCH P1,P3 ;RESET P3
JRST CHK9 ;CLEAN UP AND EXIT
CHK19: AOBJN P4,CHK12 ;TRY NEXT STR
;FALL INTO CHK20 AND COMPLAIN
;HERE WHEN THE HOME BLOCK MISCOMPARES OR IS ILL FORMED
;PREVIOUS PAGE FALLS INTO THIS
CHK20: JUMPE Q1,CHK23 ;GO IF NO LONGER IN A STR
HRROI T1,[ASCIZ /
%Wrong pack on device:/] ;SLIGHTLY MISLEADING MESSAGE
JRST CHK22 ;TYPE MESSAGE AND CONTINUE
;HERE WHEN AN IO ERROR OCCURS READING A HOME BLOCK
CHK21: TXNN T1,IS.DVE!IS.DTE ;CHECK FOR REAL ERRORS OR JUST QUITTING
JRST CHK10 ;NOT REAL ERRORS JUST TERMINATION OF IORB (ABNORMAL)
HRROI T1,[ASCIZ /
%Error reading HOME block on device:/]
CHK22: CALL UNIMES ;APPEND STOCK TRAILER
MOVX T1,US.OFS ;SET DRIVE OFF-LINE UNTIL NEW PACK IS SPUN UP
IORM T1,UDBSTS(P3) ; AT WHICH TIME WE'LL CHECK AGAIN
MOVX T1,U1.PHB ;SET PRIMARY HOMEBLOCK BAD
IORM T1,UDBST1(P3)
;HERE WHEN UNIT CHANGED STRUCTURE STATUS (FORCE REMOVAL?)
CHK23: MOVX T1,U1.STC ;IS IT STATUS CHANGE?
TDNE T1,UDBST1(P3)
JRST CHK10 ;YES TRY AGAIN
MOVX T1,US.CHB ;CLEAR CHECK HOME BLOCK BIT
ANDCAM T1,UDBSTS(P3) ; ...
JRST CHK10 ;AND DO NORMAL CHECKS
;TABLES TO DRIVE MOVING OF PACKS
MOVTAB: IFIW!UDBERR(T1)
IFIW!UDBERP(T1)
IFIW!UDBVID(T1)
IFIW!UDBSTR(T1)
IFIW!UDBONR(T1)
IFIW!UDBPNM(T1)
IFIW!UDBUDR(T1)
MOVTLN==.-MOVTAB
MOVTQ1: IFIW!UDBPWQ(T1)
IFIW!UDBTWQ(T1)
MOVTQ2: IFIW!UDBPWQ(P3)
IFIW!UDBTWQ(P3)
MOVQLN==.-MOVTQ2
;HERE FOR EACH UNIT. CHECK IF OPERATOR MESSAGE NEEDED OR RESTART
;NEEDED. IF UNIT IS ACTIVE, CHECK OVERDUE TIMER AND RESET IF HUNG.
;SEE IF THE CONTROLLER FOR THE UNIT NEEDS TO BE RESTARTED. PRESERVES
;Q1 AND Q3
UNICHK: TRNE P2,-1 ;IS THERE A CONTROLLER?
SKIPE PHYSEC ;AND IS THIS A MINUTE BOUNDARY?
JRST UNICK1 ;NO, SKIP ON
HRRZ T1,KDBDSP(P2) ;GET DISPATCH ADDRESS
TLON P2,-1 ;CHECK IF FIRST TIME FOR THIS CONTROLLER
CALL UDSCCK(T1) ;YES, CHECK IT OUT THEN
MOVE T1,UDBSTS(P3) ;GET THE STATUS WORD FOR THIS UNIT
TXNE T1,US.TAP ;IF NOT TAPE GO TO DISK STUFF
TXNN T1,US.REW ;IS THE UNIT REWINDING?
JRST UNICK1 ;NO. THEN JUST CONTINUE ON.
TXNN T1,US.OR1 ;YES. HAS IT BEEN REWINDING FOR 2 MINUTES?
JRST UNICH1 ;NO. GO INCREMENT THE TIMING FIELD.
MOVX T1,US.REW!US.ORC ;YES. GET THE REWIND BITS.
ANDCAM T1,UDBSTS(P3) ;RESET THE REWIND BITS.
MOVX T1,US.BOT!US.OIR ;GET THE BOT AND OIR BITS.
IORM T1,UDBSTS(P3) ;SET STATUS
JRST UNICK1 ;AND NOW CONTINUE ON.
UNICH1: MOVX T1,US.OR2 ;HERE TO INCREMENT THE REWIND FIELD.
ADDM T1,UDBSTS(P3) ;INCREMENT THE REWIND FIELD.
UNICK1: MOVE T1,UDBSTS(P3) ;GET STATUS FOR CHECKING
TXNE T1,US.TPD ;CHECK FOR THREE PORTED DISK
RET ;QUIT NOTHING WE WANT TO DO WITH THIS UNIT
HRRE T3,UDBSTR(P3) ;[7.1063]Get structure number
IFGE. T3 ;[8980] Part of a structure?
MOVE T2,UDBST1(P3) ;[7.1063]Get second flag word
TXNN T1,US.OFS ;[7.1063]Is the unit offline?
TXNE T2,U1.SOF ;[7.1063]Or was it offline last pass?
CALL UDBCHK ;[7.1063](P3/)Yes. Go examine it
ENDIF. ;[7.1063]
TXNE T1,US.MAI ;UNIT IN MAINTENENCE MODE?
JRST UNICK8 ;YES, DISABLE USUAL CHECKS
TXNE T1,US.MRQ ;MAINTENENCE MODE REQUESTED?
JRST UNICK9 ;YES, CHECK IF NOW ALLOWED
TXNE T1,US.CHB ;DOES THIS UNIT NEED ITS HOME BLOCKS CHECKED?
JRST UNIC10 ;YES, SEE WHAT CAN BE DONE
TXNE T1,US.PSI ;PSI REQUESTED?
CALL UNIPSI ;YES, INIT PSI SEQUENCE
UNICK2: IOPIOF ;Prevent state changes
MOVX T1,US.OIR ;OPER INTERVENTION REQUEST?
TDNN T1,UDBSTS(P3) ; ??
JRST UNICK5 ;NO - TRY OTHER CASES
ANDCAM T1,UDBSTS(P3) ;YES - RESET BIT
CALL UNITRY ;ATTEMPT TO RESTART IO
SKIPA ;ATTEMPT FAILED OR INDETERMINATE
JRST UNIOK ;SUCCESS.
MOVX T1,US.OMS ;OPERATOR MESSAGE ON MINUTE?
TDNE T1,UDBSTS(P3) ; ??
JRST UNICK4 ;YES - CHECK FOR MINUTE
IORM T1,UDBSTS(P3) ;NO - REQUEST IT AND PRINT MESSAGE NOW
UNICK3: IOPION
MOVX T1,U1.PDR!U1.PDW!U1.HBR ;CHECK FOR HOMEBLOCK PROCESS
TDNE T1,UDBST1(P3) ;NO ERROR IF THESE ARE IN PROGRESS
RET
HRROI T1,[ASCIZ/
%Write-locked drive: /] ;GET POSSIBLE MESSAGE
MOVE T2,UDBSTS(P3) ;GET UNIT STATUS
TXNN T2,US.OFS!US.CHB!US.MAI!US.MRQ!US.TAP ;OFF-LINE OR A TAPE?
TXNN T2,US.WLK ;OR NOT WRITE-LOCKED?
HRROI T1,[ASCIZ /
%Problem on device: /] ;YES, GET STANDARD MESSAGE INSTEAD
MOVE T2,UDBST1(P3) ;CHECK FOR FORCED OFFLINE
TXNN T2,U1.OFS
CALLRET UNIMES ;TYPE THE MESSAGE AND QUIT
HRROI T1,[ASCIZ /
%Drive forced offline because a running system hasn't joined cluster:/] ;yup
CALLRET UNIMES ;TYPE THE MESSAGE AND QUIT
;Here for once-a-minue check. IOPIOF!
UNICK4: LOAD T1,US.RTY,UDBSTS(P3) ;Get error retry count
CAIL T1,MSGLIM ;[8980] At max count?
IFSKP. ;[8980] If not
ADDI T1,1 ;Increase it
STOR T1,US.RTY,UDBSTS(P3)
CALLRET ONRET
ENDIF.
SKIPN PHYSEC ;Minute boundary?
JRST UNICK3 ;YES - PRINT MESSAGE
CALLRET ONRET
;Here to see if some form fo operator assitance needed. IOPIOF!
UNICK5: MOVX T1,US.OMS ;OPERATOR MESSAGE ON MINUTE?
TDNE T1,UDBSTS(P3) ;[8980] Skip if not
IFSKP. ;[8980] If not
IOPION ;Enable interrupts again
JRST UNICKT ;Check timeout
ENDIF.
CALL UNITRY ;DO RETRY
JRST UNICK4 ;FAILED - DO RETRY
UNIOK: MOVX T1,US.OMS!US.RTY ;SUCCESS, CLEAR MESSAGE BIT and retry
ANDCAM T1,UDBSTS(P3) ; ...
CALLRET ONRET ;DOne
UNIPSI: MOVX T1,US.PSI ;GET PSI BIT
ANDCAB T1,UDBSTS(P3) ;CLEAR BIT AND GET STATUS BITS
TXNN T1,US.TAP ;IS THIS A TAPE?
JRST UNIDPS ;NO -- HANDLE DISK ONLINE/OFFLINE
MOVEI T3,MTCUTB ;LOOK THRU TABLE AND FIND CORRECT UNIT
SETZ T4,0 ;COUNT OF MTA'S
UNIPS2: HRRZ T1,0(T3) ;GET UDB ADDRESS
CAIN P3,0(T1) ;THIS UNIT?
JRST UNIPSF ;YES SEE IF PSI NECESSARY
AOS T4 ;NEXT UNIT
CAIGE T4,MTAN ;CHECK FOR ALL DONE
AOJA T3,UNIPS2
RET ;NO MORE QUIT
UNIPSF: HRRZ T1,MTPSFK(T4) ;GET PSI CHANNEL
HLRZ T2,MTPSFK(T4) ;GET FORK
JUMPE T2,R ;QUIT IF NOT INITALIZED
EA.ENT ;MUST BE IN SECTION 1 !
CALLRET PSIRQ ;REQUEST PSI
UNIDPS: HRRZ T1,DSPSFK ;GET DISK PSI REQUEST
HLRZ T2,DSPSFK ;GET FORK
JUMPE T2,R ;IF NONE THIS IS NOT LEGAL
EA.ENT ;MUST BE IN SECTION 1 !
CALLRET PSIRQ ;REQUEST PSI
;HERE TO CHECK TIMER
UNICKT: MOVX T1,US.ACT ;UNIT NOW ACTIVE?
TDNN T1,UDBSTS(P3) ; ??
RET ;NO - ALL DONE
SKIPLE T2,UDB2ND(P3) ;DUAL PORTED?
TDNN T1,UDBSTS(T2) ;YES, IS IT THE ALTERNATE PATH THAT'S ACTIVE?
SKIPA T1,UDBODT(P3) ;NO, CHECK OVERDUE TIME
RET ;THE OTHER UDB IS THE ACTIVE ONE - LEAVE THIS PORT ALONE
CAML T1,TODCLK ;AGAINST PRESENT TIME
RET ;NOT OVERDUE
SAVEQ ;OVERDUE - SAVE Q ACCUMULATORS
MOVX Q1,US.ACT ;PREPARE FOR PIOFF TESTS
IOPIOF ;INTERLOCK AGAINST RACE
MOVE T1,UDBODT(P3) ;GET OVERDUE TIME AGAIN
CAMGE T1,TODCLK ;CHECK STILL OVERDUE
TDON Q1,UDBSTS(P3) ;AND STILL ACTIVE (WHILE GETTING STATUS)
JRST ONRET ;NOT BOTH - LOST RACE, USER WON.
HRRZ T4,UDBERR(P3) ;GET FUNCTION CODE IF IN ERROR RECOVERY
JUMPN T4,UNIOV0 ;PROCEED IF NONZERO
TXNE Q1,US.CIP ;CI DISK?
JRST [MOVEI T1,^D10000 ;RESET TIMER
ADDM T1,UDBODT(P3)
JRST ONRET] ;AND IGNORE THE CI DISK IT'LL BE BACK
CALL SETIRB ;IF NOT, FIND IORB
MOVEI T4,IRFSEK ;ASSUME DOING A SEEK
TXNN Q1,US.TAP ;DEVICE A TAPE?
TXNN Q1,US.POS ;OR OPERATION IS A TRANSFER?
LDB T4,IRYFCN ;YES, GET FUNCTION FROM IORB INSTEAD
UNIOV0: CALL FNDCKU ;FIND CHANNEL, CONTROLLER, AND UNIT NUMBERS
BUG.(INF,OVRDTA,PHYSIO,HARD,<PHYSIO - Overdue transfer aborted>,<<T1,CHAN>,<T2,CONTRL>,<T3,UNIT>,<T4,FUNC>>,<
Cause: The routine UNICKT checks the status of each unit periodically. During
one such check, some unit had an active IORB which timed out. The I/O
operation had been started, but not completed within 17 seconds. This
BUGINF can be followed by other BUGINFs or BUGCHKs when the device
finally responds (such as PH2DNA).
Action: This BUGINF is usually caused by flakey or broken hardware. Field
Service should examine the problem.
If the involved device is a tape drive controlled by a DX20, a common
cause of the BUGINF is the microcode halting. Reloading the DX20
microcode with DX20LD fixs the problem, and the DX20 should be
monitored by Field Service.
Data: CHAN - The channel number
CONTRL - The controller number (-1 if no controller)
UNIT - The unit number
FUNC - The operation that failed
>,,<DB%NND>) ;[7.1210]
TXNE Q1,US.POS ;CHECK SEEK OR TRANSFER THAT LOST
CALL OFFPWQ ;WAS SEEK, PULL IORB
TXNN Q1,US.POS ;WELL?
CALL OFFTWQ ;WAS TRANSFER, PULL IORB
CALL HNGIRB ;TERMINATE HUNG IORB AND RESTART CHAN
ONRET: SKIPN PHYIFL ;SHOULD WE TURN ON INTS?
IOPION ;YES, AT LONG LAST
SETZM PHYIFL ;USUALLY WE DON'T WANT TO
RET
UNICK8: IOPIOF ;INTERLOCK CHECK
MOVE T1,UDBODT(P3) ;CHECK OVERDUE TIME
JUMPE T1,ONRET ;UNTIMED
CAML T1,TODCLK ;CHECK AGAINST NOW
JRST ONRET ;STILL OK
MOVE T1,UDBONR(P3) ;GET OWNING FORK
IOPION
EA.ENT ;MUST BE IN SECTION 1 !
LOAD T1,FKJO%,(T1) ;GET JOB
CALL ELOGOO ;LOGOUT OUT THAT JOB
RET
UNICK9: MOVX T1,US.ACT ;CHECK IF UNIT STILL ACTIVE
TDNE T1,UDBSTS(P3) ; ??
JRST UNICK2 ;YES - PERFORM USUAL CHECKS
MOVX T1,US.MAI ;NO, SET IT INTO MAINTENENCE MODE
IORM T1,UDBSTS(P3) ; ...
RET ;AND CONTINUE SCAN
;TABLES FOR HOME BLOCK CHECKING
HBCNT=HBLEN-1 ;WE ONLY TRANSFER 177 WORDS SINCE LAST WORD OF HB IS UNNECESSARY
;HERE WHEN A UNIT NEEDS ITS HOME BLOCKS CHECKED
UNIC10: IOPIOF ;DISABLE ITERRUPTS
SKIPN P4,UDBCHB(P3) ;IS THIS UNIT CURRENTLY BEING CHECKED?
JRST UNICIA ;NO MAYBE WE SHOULD
MOVX T1,IS.ERR!IS.DON ;ANYTHING TO DO?
TDNE T1,IRBSTS(P4) ;CHECK THE STATUS
JRST CHK8 ;MUST BE SOMETHING TO DO
JRST UNICK2 ;YES ALL OK MUST BE ACTIVE OR OFFLINE
UNICIA: SKIPGE UDB2ND(P3) ;IS THE THE ALTERNATE PATH OF A DUAL-PORTED DRIVE?
JRST UNIC13 ;YES, DON'T BOTHER TO CHECK IT (WILL CHECK MAIN PORT)
MOVE T1,CDBSTS(P1) ;CHECK CHANNEL FOR ACTIVE
TXNE T1,CS.CIP ;CI?
JRST UNIC11 ;YES NO CHECK FOR ACTIVE
MOVX T1,US.OFS!US.ACT!US.MAI ;IS THIS UNIT OFFLINE OR ACTIVE?
TDNE T1,UDBSTS(P3) ; ???
JRST UNIC12 ;YES - CANNOT CHECK
MOVX T2,KS.ACT ;CONTROLLER ACTIVE
TRNE P2,-1 ;NO CONTROLLER?
TDNN T2,KDBSTS(P2)
TXNE T1,CS.ACT ;OR CHANNEL
JRST UNIC12 ;QUIT
UNIC11: CALL GETIRC ;GET AN IORB
JRST UNIC12 ;NONE FOND WAIT
MOVX T1,U1.STC!U1.PHB!U1.SHB!U1.PDR!U1.PDW ;CLEAR STATUS CHANGED FLAG
ANDCAM T1,UDBST1(P3)
MOVX T1,U1.HBR ;SET HOME BLOCK READ
IORM T1,UDBST1(P3)
MOVEI T2,HM1BLK ;READ HOMEBLOCK 1
CALL RDHBLK ;(T2,P3,P4/) READ HOMEBLOCK
UNIC12: IOPION ;TRY OTHER PARTS OF OFFLINE STUFF
JRST UNICK2 ;COULDNT CHECK AFTERALL
;HERE WHEN A UNIT CHANGES STRUCTURE STATUS
UNIC13: MOVX T1,US.CHB ;CLEAR CHECK HOME BLOCKS BIT
ANDCAM T1,UDBSTS(P3) ; ...
MOVX T1,U1.STC ;CLEAR STC TO
ANDCAM T1,UDBST1(P3)
IOPION
JRST UNICK2 ;AND DO USUAL CHECKS
;[7.1063]
;
; UDBCHK - Check an offline unit for structure offline status
;
; This routine is called when a structure is offline, as
; indicated by UDBSTS bit US.OFS, or has been offline, as
; indicated by UDBST1 bit U1.SOF. If the unit is offline and the
; structure it belongs to is not offline, it either starts a
; timer in the SDB and sets bit U1.SOF in this UDB or checks the
; timer to see if it has gone off. If it has gone off, it marks
; the structure offline by setting bit MS%OFS in the SDB.
;
; If the unit is not offline, bit U1.SOF is cleared in the UDB,
; and then it calls routine STRSCN to see if all the UDBs are
; online for this structure. If they are, it clears the structure
; offline bit (MS%OFS) in the SDB. If there is another UDB
; offline in this structure, U1.SOF is set for that UDB and
; MS%OFS remains set.
;
; T1/ Contents of UDBSTS
; T2/ Contents of UDBST1
; P3/ Address of UDB
; CALL UDBCHK
;
; Returns +1: Always
;
UDBCHK: SAVET ;Preserve the T's
TXNE T2,U1.SOF ;Was this drive offline last pass?
IFSKP. ;No, then it just went offline
SKIPN TMRINT ;Is offline structures enabled?
RET ;No, done
HRRE T3,UDBSTR(P3) ;Get the structure number
JUMPL T3,R ;[7.1112]If not in a structure, do nothing
CAIE T3,PSNUM ;[7.1112]If the boot structure
CAMN T3,LGSIDX ;[7.1112]Or the Login Structure
RET ;Then do nothing
MOVE T1,STRTAB(T3) ;Get the SDB pointer
MOVE T2,SDBSTS(T1) ;Get the SDB flag word
TXNN T2,MS%OFS ;Is the structure already offline
OPSTR <SKIPE>,STRTMR,(T1) ;Or is the timer already running?
RET ;Yes, do nothing
MOVE T2,TODCLK ;Get TODCLK
STOR T2,STRTMR,(T1) ;And timestamp the SDB
MOVX T2,U1.SOF ;Mark this UDB
IORM T2,UDBST1(P3) ; as the one that caused this action
RET ;Done for now
ENDIF. ;
TXNN T1,US.OFS ;If this unit offline?
IFSKP. ;Yes (and U1.SOF is set from above check)
HRRE T3,UDBSTR(P3) ;Get the structure number
JUMPL T3,UDBCK1 ;[7.1112]Error if not in a structure
CAIE T3,PSNUM ;[7.1112]Is this unit the boot structure?
CAMN T3,LGSIDX ;[7.1112]Or the Login Structure
JRST UDBCK1 ;Yes, trouble
MOVE T1,STRTAB(T3) ;Get SDB pointer
MOVE T2,SDBSTS(T1) ;Get the SDB flag word
TXNE T2,MS%OFS ;Is the structure offline already?
RET ;Yes, then do nothing
SKIPE T2,TMRINT ;Has TMRINT been cleared?
IFSKP. ;Yes, then this feature is now disabled
SETZRO STRTMR,(T1) ;Clear the time stamp in the SDB
MOVX T1,U1.SOF ;Clear U1.SOF
ANDCAM T1,UDBST1(P3) ; So we don't come through here again
RET ;Done
ENDIF. ;
OPSTR <ADD T2,>,STRTMR,(T1) ;Add in the timestamp
CAML T2,TODCLK ;Has the timer gone off?
RET ;No. Keep waiting
MOVX T2,MS%OFS ;Get the offline bit
IORM T2,SDBSTS(T1) ;And set it in the SDB
SETZRO STRTMR,(T1) ;Clear the timestamp word
SKIPE CIBUGX ;[7.1278] Wanna see this?
BUG.(CHK,OFFSTR,PHYSIO,SOFT,<UDBCHK - Structure has been marked offline>,<<T3,STRNUM>,<P3,UDB>>,<
Cause: PHYSIO has detected that a disk unit has been offline long enough to
mark the structure to which it belongs as offline. This interval has
been preset by the system manager.
Action: The second additional data word of this BUGCHK shows the address of the
UDB of the offending disk drive. Determine why this drive is offline
and repair the condition.
Data: STRNUM - The structure number that has been marked offline
UDB - The address of the UDB of the disk drive that caused this
action.
>,,<DB%NND>) ;[7.1210]
RET ;Done. The structure is offline
ENDIF. ;
; Here when U1.SOF is on in the UDB and US.OFS is off. This indicates that
; a drive that had been offline is now back online. Determine if the
; structure should stay offline or if it should be set back online.
;
MOVX T1,U1.SOF ;Clear bit U1.SOF
ANDCAM T1,UDBST1(P3) ; in the UDB
CALL STRSCN ;(P3/)And check out the structure's status
RET ;Done
; Here when U1.SOF is set in a UDB that is not part of a structure
; or is part of the PS structure.
UDBCK1: MOVX T1,U1.SOF ;Clear U1.SOF
ANDCAM T1,UDBST1(P3) ; to prevent this BUGCHK from repeating
UDBCK2: BUG.(CHK,STRNIL,PHYSIO,SOFT,<UDBCHK - Illegal structure number in offline UDB>,<<T3,STRNUM>,<P3,UDB>>,<
Cause: Routine UDBCHK found that bit U1.SOF had been set in the UDB of a
structure that was associated with the PS structure or with no
structure at all. This should not occur.
Action: No action is necessary, but if this BUCGHK occurs repeatedly, the
conditions that led to this situation should be investigated.
Data: STRNUM - The illegal structure number found in the UDB
UDB - The illegal UDB
>)
RET ;Done
;[7.1063]
;
; STRSCN - Check a structure's UDBs for offline status
;
; This routine scans all the UDBs associated with a given unit.
; If none are found that are marked offline (bit US.OFS set in
; UDBSTS), then bit MS%OFS (structure is offline) is cleared in
; word SDBSTS of the SDB. If a UDB is found that is offline, then
; bit U1.SOF is set in word UDBST1 of the UDB and bit MS%OFS is
; not turned off in the SDB.
;
; P3/ Address of UDB
; CALL STRSCN
;
; Returns +1: Always
;
STRSCN: HRRE T3,UDBSTR(P3) ;Get the structure number
JUMPL T3,UDBCK2 ;[7.1112]Error if not in a structure
CAIE T3,PSNUM ;[7.1112]Is it part of the boot structure?
CAMN T3,LGSIDX ;[7.1112]Or the Login Structure
JRST UDBCK2 ;Then we have a problem
MOVE T1,STRTAB(T3) ;Get the SDB pointer
HRLI T1,-MXSTRU ;Set up AOBJN pointer
STRLUP: SKIPN T2,SDBUDB(T1) ;Get UDB pointer
JRST STRSC1 ;None found
MOVE T4,UDBSTS(T2) ;Get the UDB status word
TXNN T4,US.OFS ;Is this unit offline?
IFSKP. ;Yes
MOVX T1,U1.SOF ;Turn on U1.SOF
IORM T1,UDBST1(T2) ; in this UDB
RET ;And leave the structure offline
ENDIF. ;
AOBJN T1,STRLUP ;Keep looking
STRSC1: MOVE T1,STRTAB(T3) ;Get back the SDB address
MOVX T2,MS%OFS ;Get the structure offline bit
TDNN T2,SDBSTS(T1) ;[7.1278] Is this structure now offline?
IFSKP. ;[7.1278] If so,
SKIPE CIBUGX ;[7.1278] Don't BUGCHK unless we want to
BUG.(CHK,ONSTR,PHYSIO,SOFT,<UDBCHK - Structure has been marked online>,<<T3,STRNUM>>,<
Cause: A structure that had been previsouly marked offline due an offline
disk unit is now online again.
Action: No action is required, this BUG is for information only.
Data: STRNUM - The number of the structure that is now online
>,,<DB%NND>) ;[7.1278]
ENDIF. ;[7.1278]
ANDCAM T2,SDBSTS(T1) ;Set the structure online
SETZRO STRTMR,(T1) ;Clear the timestamp for good measure
RET ;Structure is now online again
SUBTTL Homeblock and PDB Routines
;CHBSTR - SETS IS.ERR IF THE DRIVE HAS GONE OFFLINE. THIS WILL CAUSE THE
;HOMEBLOCK CHECKER TO TRY AGAIN LATER. THIS ROUTINE WILL BE CALLED FROM
;STRTIO AS THE ENTRY ROUTINE BEFORE ACTUALLY SCHEDULING THE HOMEBLOCK IORB.
; P3/ UDB
; P4/ IORB
; CALL CHBSTR ;(P3,P4/)
; RETURN +1: ERROR BIT SET IN IORB
; +2: READY TO TRANSFER
CHBSTR: MOVX T1,US.OFS ;CHECK FOR OFFLINE TRANSITION
TDNN T1,UDBSTS(P3)
RETSKP ;NO TRY TRANSFER
MOVX T1,IS.ERR ;SET ERROR BUT NO ERROR BITS TO TERMINATE AND TRY LATER
IORM T1,IRBSTS(P4)
RET ;STOP TRANSFER
;CHBDON - FIGURES OUT THE STATE OF HOMEBLOCK CHECKING AND INITIATES THE
;NEXT STEP. CHBDON IS CALLED BY DONIRB AS THE EXIT ROUTINE FOR THE HOMEBLOCK
;IORB. THIS ALLOWS US TO PROCESS THE COMPLETED IORB BEFORE THE POLLER CAN SEE
;THE COMPLETED REQUEST. THIS WILL NOT BE CALLED IF THE DRIVE IS OFFLINE SO
;IS.ERR IMPLIES REAL ERROR HERE.
; P1/ CDB
; P3/ UDB
; P4/ IORB
; CALL CHBDON ;(P1,P3,P4/)
; RETURN +1:
CHBDON: SAVEPQ
MOVE T1,IRBSTS(P4) ;WAS THERE
TXNE T1,IS.ERR ; AN ERROR?
JRST CHBDER ;YES
SKIPGE UDB2ND(P3) ;[7.1035] Is this a secondary UDB?
MOVE P3,UDB2ND(P3) ;[7.1035] Yes, point to the primary UDB please
MOVE T1,UDBST1(P3) ;NO, GET STATUS
TXZE T1,U1.HBR ;IS THIS HOMEBLOCK READ?
JRST CHBPDR ;YES
TXZE T1,U1.PDR ;NO, IS IT PDB READ?
JRST CHBPDB ;YES
TXZN T1,U1.PDW ;NO, IS IT PDB WRITE?
BUG.(CHK,PDBSTA,PHYSIO,SOFT,<PHYSIO - Inconsistent state of UDB status bits>,,<
Cause: CHBDON is called by DONIRB as the exit routine for the home block IORB.
This allows the monitor to process the completed IORB before the poller
can see the completed request. However, CHBDON was called with UDBST1
bits indicating that no homeblock read, PDB read, or PDB write was in
progress.
Action: If this BUGCHK is reproducable, change it to a BUGHLT, and seind in an
SPR with the dump and instructions on how to reproduce the problem.
>,,<DB%NND>) ;[7.1210]
MOVEM T1,UDBST1(P3) ;YES, CLEAR THE BIT AND DO CHECK AGAIN
CALL GIVIRB ;(P4/) RETURN IORB
SETZM UDBCHB(P3) ;CLEAR HOMEBLOCK IORB FOR THIS DISK
RET ;WAIT FOR NEXT CALL
;HERE ON ERROR DURING HOMEBLOCK READ
CHBDER: TXNN T1,IS.DTE!IS.DVE ;HARD ERRORS
RET ;NO OFFLINE
MOVE T2,UDBST1(P3) ;GET THE STATUS
TXZN T2,U1.HBR ;HOME BLOCK READ?
RET ;NOT HOME BLOCK ERROR
TXOE T2,U1.PHB ;PRIMARY HOME BLOCK ERROR SET?
JRST [ TXO T2,U1.SHB ;SET SECONDARY HOME BLOCK ERROR
MOVEM T2,UDBST1(P3)
RET] ;AND RETURN FOR LATER TRIES
TXO T2,U1.PHB!U1.HBR ;SET PRIMARY HOME BLOCK ERROR
MOVEM T2,UDBST1(P3) ;SET PRIMARY HOME BLOCK ERROR FLAG
MOVX T2,HM2BLK ;HOMEBLOCK 2
CALLRET RDHBLK ;READ THE HOMEBLOCK
;[8980] Here when homeblock read is complete, schedule a PDB read if needed.
;PDB reads/writes are NOT needed if the disk cannot possibly be seen from
;another system: it is not MSCP served and is ported only to us (front end
;disk, don't care disk, both massbus ports to this system, or locked on one
;massbus port).
CHBPDR: MOVE T2,UDBSTS(P3) ;[8980] Load UDB status bit
TXNE T2,US.CIA!US.CIP ;[8980] Is this a MSCP disk?
JRST CHBPDY ;[8980] Yes, must read/write PDB
TXNN T1,U1.FED!U1.DCR ;[8980] Load the front end disk and don't care
SKIPE UDB2ND(P3) ;[8980] Or is this disk ported to us too?
JRST CHBPDN ;[8980] Yes, no need to PDB read/write
TXNE T2,US.2PT ;[8980] Both ports not to us, is disk dual port
JRST CHBPDY ;[8980] Yes, we must do the PDB read/writes
CHBPDN: TXZ T1,U1.OFS ;[8980] Insure that forced offline bit is clear
MOVEM T1,UDBST1(P3) ;[8980] Save updated status bits
RET ;[8980] Return
CHBPDY: TXO T1,U1.PDR ;[8980] Set PDB read in progress
MOVEM T1,UDBST1(P3) ;[8980] Store updated status bits
CALLRET RDPDB ;AND READ NEW PDB
;Here when PDB read has completed, check the PDB data and rewrite if needed.
CHBPDB: MOVEM T1,UDBST1(P3) ;STORE UDB STATUS
CALL CHKPDB ;IS THE STATUS ON THE DISK OK?
CALL WRTPDB ;NO RESET IT AND TRY AGAIN
RET ;QUIT
;CHBCWB - BUILD CCW FOR THE HOMEBLOCK REQUEST
; P3/ UDB
; P4/ IORB
; CALL CHBCWB ;(P3,P4/)
; RETURN +1
CHBCWB: SAVEQ
SETZ Q2,0 ;COUNTER
XMOVEI Q1,IRBCCW(P4) ;ADDRESS OF PLACE TO STORE CCW'S
HRLZI Q3,1 ;AMOUNT TO UPDATE IRBXFL
CHBBAK: CALL CHBLOP ;(P3/) ADD AN ENTRY
ADDM Q3,IRBXFL(P4) ;UPDATE COUNT OF CCW'S STORED
AOS Q2 ;UPDATE POINTER
CAIGE Q2,HOMISZ
AOJA Q1,CHBBAK
RET
CHBLOP: MOVEI T1,@HOMLIZ(Q2) ;GET SIZE OF THIS REQUEST
HRLI T1,IRMWRD ;SET WORD MODE
MOVE T2,HOMADR(Q2) ;MOVERESS TO TRANSFER TO
CAIE T2,HOMSKP
ADDI T2,(P3) ;ADD IN UDB OFFSET
MAP T2,(T2) ;FIND REAL ADDRESS
TLZ T2,777760 ;MASK JUNK
CHBSKP: HRRZ T3,CDBDSP(P1) ;CHANNEL DISPATCH
CALL CDSCCW(T3) ;(T1,T2/T1) GO BUILD CCW
MOVEM T1,0(Q1) ;SAVE CCW
RET
HOMLIZ: HOMLUN-HOMNAM+1 ;FIRST FEW WORDS OF HOME BLOCK
HOMMID-HOMLUN-1 ;SKIPPED WORDS
HOMDCF-HOMMID+1 ;HOM MID AND DON'T CARE
HOMCOD-HOMDCF-1
HOMCOD-HOMCOD+1
HOMISZ=.-HOMLIZ
HOMADR: UDBNAM ;ADDRESS OF FIRST WORD TO TRANSFER
HOMSKP ;SKIP ADDRESS
UDBMID ;UDB MID WORD
HOMSKP ;SKIP ADDRESS
UDBCOD ;CODE TO IDENTIFY HOME BLOCK
;RDHBLK - START HOMEBLOCK READ
; T2/ ADDRESS OF BLOCK
; P3/ UDB
; P4/ IORB
; CALL RDHBLK ;(T2,P3,P4/)
; RETURN +1
RDHBLK: SETZM IRBSTS(P4) ;CLEAR STATUS
MOVEI T1,IRFRED ;GET READ FUNCTION CODE
DPB T1,IRYFCN ;STORE IN IORB
MOVEI T1,IRMWRD ;GET WORD MODE
DPB T1,IRYMOD ;STORE IN IORB
MOVX T1,IS.IEL ;INHIBIT ERROR LOGGING
IORM T1,IRBSTS(P4) ; ...
MOVEI T1,HBCNT ;SETUP COUNT
HRRZM T1,IRBCNT(P4) ; ...
HRRI T1,IRBCCW(P4) ;SET UP CHANNEL ADDRESS
HRLI T1,IRBCCW(P4) ; SET ENDING ADDRESS
MOVEM T1,IRBXFL(P4) ;STORE IN IORB
TXO T2,IRBPAD ;SET PHYSICAL ADDRESS REQUEST
MOVEM T2,IRBADR(P4) ;STORE ADDRESS DECIDED UPON
MOVE T1,[CHBSTR,,CHBDON] ;INTERRUPT ROUTINE
MOVEM T1,IRBIVA(P4) ; STORE IN IORB
CALL CHBCWB ;(P3,P4/) BUILD CCW'S
MOVEM P4,UDBCHB(P3) ;STORE SPECIAL IORB IN UDB
STRHBT: SETOM PHYIFL ;DON'T TURN INTERRUPTS BACK ON
SAVEQ ;SAVE Q REGISTERS FOR DGUMAP
CALLRET SIO2 ;(P3/) START THE I/O
;RDPDB - READ A PDB FROM DISK INTO THE UDB
; P3/ UDB
; P4/ IORB
; CALL RDPDB ;(P3,P4/)
; RETURN +1
RDPDB: SETZM IRBSTS(P4) ;ZERO STATUS
MOVEI T1,IRFRED ;SET READ FUNCTION
DPB T1,IRYFCN ;STORE IN IORB
MOVEI T1,IRMWRD ;SET WORD MODE
DPB T1,IRYMOD
MOVX T1,IS.IEL ;INHIBIT ERROR LOGGING
IORM T1,IRBSTS(P4)
MOVEI T1,PDBLEN ;GET LENGTH OF REQUEST
MOVEM T1,IRBCNT(P4)
HRRI T1,IRBCCW(P4)
HRLI T1,IRBCCW+1(P4) ;CCW POINTERS
MOVEM T1,IRBXFL(P4) ;STORE IN IORB
MOVEI T2,PDBBLK ;SET BLOCK OF PDB
TXO T2,IRBPAD ;SET PHYSICAL ADDRESS
MOVEM T2,IRBADR(P4) ;SET IN IORB ADDRESS
MOVE T1,[CHBSTR,,CHBDON] ;SET START/STOP ADDRESS
MOVEM T1,IRBIVA(P4)
MOVEI T1,PDBLEN ;LENGTH OF REQUEST
HRLI T1,IRMWRD ;SET WORD MODE
XMOVEI T2,UDBPDB(P3) ;ADDRESS OF PDB
MAP T2,(T2) ;FIND REAL ADDRESS
TLZ T2,777760 ;MASK JUNK
HRRZ T3,CDBDSP(P1) ;GET CHANNEL DISPATCH
CALL CDSCCW(T3) ;(P3,P4/) CONVERT CCW
MOVEM T1,IRBCCW(P4) ;STORE CCW
JRST STRHBT ;(P3/) START TRANSFER
;CHKPDB - CHECK THE CURRENT STATE OF THE UDB'S PDB. IF IT DIFFERS FROM
;REALITY, WE MUST FIX IT, WRITE IT BACK TO THE DISK, AND START ALL OVER.
; P3/ UDB
; CALL CHKPDB ;(T1,P3/)
; RETURN +1: NEED TO WRITE PDB TO DISK (THIS CAUSES US TO READ IT AGAIN)
; +2: ALL OK, NO RE-WRITE NECESSARY
CHKPDB: DMOVE T1,UDBSER(P3) ;GET THE SERIAL NUMBER FROM THE PDB
CAMN T2,UDBDSN(P3) ;CHECK AGAINST DRIVE SERIAL NUMBER
CAME T1,UDBDSH(P3) ; AND SEE IF IT IS THE SAME
IFNSK.
DMOVE T1,UDBDSH(P3) ;DON'T MATCH, STORE CURRENT DRIVE SERIAL NUMBER
DMOVEM T1,UDBPDB(P3) ; IN PDB
IOR T1,T2 ;CHECK FOR ZERO SERIAL NUMBER
JUMPN T1,RSTPDB ;[8908] Jump if non zero serial number
CALL FNDCKU ;[8908] (P1-P3/T1-T3) Get cku numbers
BUG.(CHK,PHYNOS,PHYSIO,HARD,<PHYSIO - No serial number for disk drive>,<<P1,CHAN>,<P2,CONT>,<P3,UNIT>>,<
Cause: The serial number of a disk drive is missing (zero). A non-zero unique
disk drive serial number is required for all disks in a TOPS-20
environment. The drive is marked as offline and is not used.
Action: Field Service must be called to set a non-zero unique serial number for
the disk drive.
Data: CHAN - Channel number
CONT- Controller number
UNIT - Unit number
>,,<DB%NND>) ;[8908][7.1210]
MOVX T1,US.OFS ;THROW THE DRIVE OFFLINE
IORM T1,UDBSTS(P3) ;BYE
RETSKP ;DON'T RE-WRITE THE BLOCKS
ENDIF.
MOVX T1,U1.DCR!U1.DCD ;CLEAR DON'T-CARE
ANDCAB T1,UDBST1(P3) ; STATUS
MOVE T2,[SIXBIT/DONOCA/] ;GET DON'T-CARE INDICATOR
CAMN T2,UDBDCF(P3) ;CHECK FOR DON'T-CARE FLAG ON DISK
TXO T1,U1.DCD ;SET DON'T-CARE DISK
MOVEM T1,UDBST1(P3) ;UPDATE STATUS
TXNN T1,U1.DCU!U1.DCD ;ANY DON'T-CARE STATUS?
JRST CHKPD3 ;NO, ALL IS NORMAL
TXC T1,U1.DCU!U1.DCD ;YES, IS THERE A
;...
;...
TXNE T1,U1.DCU!U1.DCD ; DON'T-CARE MATCH?
IFSKP.
MOVX T1,U1.DCR ;YES, SET DON'T-CARE
IORM T1,UDBST1(P3) ; ACCESS
BUG.(INF,PHYDCR,PHYSIO,SOFT,<PHYSIO - Disk being treated as DON'T-CARE>,<<P1,CHAN>,<P2,CONT>,<P3,UNIT>>,<
Cause: A don't-care disk was found on a don't-care drive.
Action: No action required, this bug is for information only.
Data: CHAN - The channel number
CONT - The controller number or -1
UNIT - The unit number
>,,<DB%NND>) ;[7.1210]
RETSKP ;DON'T NEED FURTHER PDB CHECKING
ELSE.
;We have a DON'T-CARE mismatch
TXNE T1,U1.DCU ;IS IT A DON'T-CARE DRIVE?
IFSKP.
BUG.(INF,PHYDCU,PHYSIO,SOFT,<PHYSIO - Do-care disk on don't-care drive>,<<P1,CHAN>,<P2,CONT>,<P3,UNIT>>,<
Cause: A standard disk has been detected on a drive which has been declared
DON'T-CARE. This combination is treated as a standard drive.
Action: Either set the disk as don't-care, or set the drive as do-care.
Data: CHAN - The channel number
CONT - The controller number or -1
UNIT - The unit number
>,,<DB%NND>) ;[7.1210]
ELSE.
BUG.(INF,PHYDCD,PHYSIO,SOFT,<PHYSIO - Don't-care disk on do-care drive>,<<P1,CHAN>,<P2,CONT>,<P3,UNIT>>,<
Cause: A don't-care disk has been encountered on a standard drive. This
combination is treated as a standard drive.
Action: Either set the disk as a "do-care" or set the drive as "don't-care".
Data: CHAN - The channel number
CONT - The controller number or -1
UNIT - The unit number
>,,<DB%NND>) ;[7.1210]
ENDIF.
ENDIF.
CHKPD3: SKIPN FESER ;QUIT IF FE HASN'T GIVEN US SERIAL NUMBERS YET
JRST [ SETZ T1, ;CHECK TO SEE IF WE ARE UP YET WITH CFS
SKIPE PROFLG ;CHECK FOR USE OF SECONDARY PROTOCOL
CALL PTHSTS ;(T1/T2) GET CI STATUS
RETSKP ;NO ALL OK FOR NOW
BUG.(HLT,BADFEV,PHYSIO,SOFT,<CHKPDB - Wrong or bad front-end version>,,<
Cause: The RSX20F front-end did not send a type 40 message to idenify the
front-end disk serial numbers.
Action: Run a more recent copy of the RSX20F front-end software. Version 16-00
of RSX20F was released with TOPS-20 version 7.0.
>)]
CALLRET UPDPDB ;(P3/) Check PDB values and update if necessary
;RSTPDB - RESET THE UDB'S PDB LEAVING NOTHING BUT OUR OWN NODE'S STATUS AND THE
;DISK'S SERIAL NUMBER.
; P3/ UDB
; CALL RSTPDB ;(P3/)
; RETURN +1
RSTPDB: CALL CLRPDB ;(/) CLEAR THE PDB
SKIPN FESER ;QUIT IF FE HASN'T GIVEN US SERIAL NUMBERS YET
RET
MOVE T1,APRSER ;[7357] Get CPU serial number
SKIPN P5,CHNTAB+7 ;CI THERE?
JRST [ HRLZM T1,UDBNPR(P3) ;NO SET PROCESSOR STATUS AND QUIT
RET]
MOVE T2,CDBSTS(P5) ;GET STATUS
TXNN T2,CS.CIP ;CI type channel?
JRST [ HRLZM T1,UDBNPR(P3) ;NO SET PROCESSOR STATUS AND QUIT
RET]
SKIPL T1,CDBNOD(P5) ;GET OUR NODE
CALL PTHSTS ;(T1/T2) GET THE STATUS OF THE CI
RET ;NONE DON'T WRITE ANYTHING TILL WE EXIST
ADD T1,P3 ;ADD UDB OFFSET
HRL T2,APRSER ;[8980] Set serial number in left half
MOVEM T2,UDBP00(T1) ;STORE STATUS
RET
;WRTPDB - WRITE UDB'S PDB TO THE DISK
; P1/ CDB
; P3/ UDB
; CALL WRTPDB ;(P1,P3/)
; RETURN +1
WRTPDB: MOVE P4,UDBCHB(P3) ;GET THE ADDRESS OF THE IORB TO USE
MOVX T1,IS.IEL ;INHIBIT ERROR LOGGING
MOVEM T1,IRBSTS(P4) ;SET IN IORB
MOVX T1,U1.PDW ;SET THE PDB WRITE WAIT BIT
IORM T1,UDBST1(P3) ;SET WAITING FOR PDB
MOVEI T1,IRFWRT ;SET WRITE FUNCTION
DPB T1,IRYFCN ;SET IN IORB
MOVEI T1,IRMWRD ;WORD MODE
DPB T1,IRYMOD ;SET MODE
HRLI T1,IRBCCW+2(P4) ;SET UP LAST WORD OF CCW FIRST IS ALREADY SETUP
HLLM T1,IRBXFL(P4) ;STORE IN IORB
MOVE T1,[PDBBLK!IRBPAD] ;SET PHYSICAL ADDRESS OF PDB TABLE
MOVEM T1,IRBADR(P4)
MOVEI T1,HBLEN ;SET LENGTH
MOVEM T1,IRBCNT(P4) ;STORE IN IORB
MOVEI T1,PDBLEN
HRLI T1,IRMWRD ;SET WORD MODE
XMOVEI T2,UDBPDB(P3) ;ADDRESS TO START XFER
MAP T2,(T2) ;WHERE TO REALLY WRITE FROM
TLZ T2,777760 ;MASK OFF JUNK BITS
HRRZ T3,CDBDSP(P1) ;GET THE DISPATCH ADDRESS
CALL CDSCCW(T3) ;(P3,P4/) BUILD CCW
MOVEM T1,IRBCCW(P4) ;STORE CCW
MOVE T1,[IRMWRD,,HBLEN-PDBLEN]
XMOVEI T2,HOMSKP ;WRITE JUNK
MAP T2,(T2)
TLZ T2,777760 ;MASK OFF JUNK BITS
HRRZ T3,CDBDSP(P1) ;GET DISPATCH ADDRESS
CALL CDSCCW(T3) ;(P3,P4/) BUILD CCW
MOVEM T1,IRBCCW+1(P4) ;STORE CCW
LDB T2,USYTYP ;GET TYPE
CAIE T2,.UTP20 ;IS IT RP20?
JRST STRHBT ;START TRANSFER
HRLZI T1,417320 ;SET CHANNEL SKIP
MOVEM T1,IRBCCW+1(P4)
MOVEI T1,1000 ;SET UP NEW COUNT
MOVEM T1,IRBCNT(P4) ;SET COUNT
JRST STRHBT ;START TRANSFER
;UPDPDB - UPDATE THE UDB'S PDB WITH CURRENT STATUS
; P3/ UDB
; CALL UPDPDB ;(P3/)
; RETURN +1: UDB'S PDB UPDATED
; +2: NO CHANGES MADE
;
; LOCAL AC USAGE: Q2/ OUR CI NODE NUMBER
UPDPDB: STKVAR <UPDAT> ;"UPDATE THE DISK" FLAG
SETZM UPDAT ;ASSUME NOT UPDATING
SKIPN P5,CHNTAB+7 ;CHECK FOR POSSIBLE CI
JRST UPDNCI ;NON-CI PROCESSOR
MOVE T3,CDBSTS(P5) ;GET THE STATUS OF THE CHANNEL
TXNE T3,CS.CIP ;IS THIS REALLY A CI?
JRST UDBPCI ;[8980] Yes, we have a CI
;We are not on a CI and we have a disk that must have a port that we don't know
;about. This disk will be placed offline and not used until it is single
;ported to us again.
UPDNCI: MOVX T3,U1.OFS ;[8980] Get forced-offline flag bit please
IORM T3,UDBST1(P3) ;[8980] Force disk offline
SETO Q2, ;[8980] Set node number to -1 (not on CI)
JRST UPDOUT ;[8980] Write the PDB if needed
;We are on a CI
UDBPCI: SKIPGE Q2,CDBNOD(P5) ;[8980] Get our node number
RETSKP ;[8980] Not able to use CI, don't write PDB
MOVE T4,Q2 ;GET THE NODE NUMBER
ADD T4,P3 ;FIND THE OFFSET INTO THE UDB
HLRZ T3,UDBP00(T4) ;GET THE PREVIOUS SERIAL NUMBER
CAMN T3,APRSER ;[8980] Are they the same?
IFSKP. ;[8980] No
MOVE T1,Q2 ;NO, THEN WE MUST RE-WRITE SINCE DISK WAS MOVED
CALL PTHSTS ;(T1/T2) GET STATUS
SETO T2, ;NO CI
HRL T2,APRSER ;[8980] Fix up serial number
MOVEM T2,UDBP00(T4) ;SET IN UDB
SETOM UPDAT ;FLAG MUST RE-WRITE
JRST UPDDID ;FLAG DISK OFFLINE FOR NOW
ENDIF.
MOVX T1,U1.OFS ;CLEAR FORCED-FFLINE
ANDCAM T1,UDBST1(P3) ; STATUS
MOVEI Q1,C%SBLL-1 ;LOOP THRU ALL NODES
UPDLOP: CAMN Q1,Q2 ;CHECK FOR OUR NODE
JRST UPDEND ;IT'S US
MOVE T1,Q1 ;GET NODE NUMBER
CALL PTHSTS ;(T1/T2) GET REQUEST-ID STATUS
JRST UPDDID ;DECLARE OFFLINE SINCE CI NOT RUNNING
TXNN T2,UDB%WA+UDB%WB ;NODE ANSWERING REQUEST-IDS?
JRST UPDEND ;NO, MOVE ON
TXNE T2,UDB%MA ;YES, NODE IN MAINTENANCE MODE?
JRST UPDEND ;YES, MOVE ON
ADD T1,P3 ;NO, POINT TO UDB
HRRZ T4,UDBP00(T1) ;GET WIRE STATUS FROM PDB
TXNN T4,UDB%WA+UDB%WB ;NODE ANSWERING REQUEST-IDS?
JRST UPDEND ;NO, MOVE ON
TXNE T4,UDB%MA ;YES, NODE IN MAINTENANCE MODE?
JRST UPDEND ;YES, MOVE ON
SKIPE CFSSTS(Q1) ;IS THERE A CFS CONNECTION?
IFSKP.
MOVE T2,Q1 ;NO, SET UP REMOTE NODE NUMBER
CALL ISIT20 ;(T2/) IS REMOTE SYSTEM TOPS-20?
IFSKP. ;[8980] Yes it is a TOPS-20 system
JRST UPDDID ;YES, DECLARE DISK OFFLINE - SOMETHING IS WRONG
ENDIF. ;[8980] Not a TOPS-20 system
SETZM UDBP00(T1) ;[8980] Clear old data
SETOM UPDAT ;[8980] Indicate we must update disk's PDB
ENDIF.
UPDEND: SOJGE Q1,UPDLOP ;TRY NEXT NODE
MOVX T3,U1.OFS ;CLEAR
ANDCAM T3,UDBST1(P3) ; FORCED-OFFLINE
SETZ T3, ;INDICATE NOT SETTING OFFLINE
JRST UPDDI1 ;MOVE ON
UPDDID: MOVX T3,U1.OFS ;FORCE DISK OFFLINE
IORM T3,UDBST1(P3) ;SET CURRENT STATUS
UPDDI1: MOVX T1,US.2PT
TDNE T1,UDBSTS(P3) ;IS DISK MULTI-ACCESS?
IFSKP.
IFN. T3 ;[8980] Nope, are we offlining this disk?
MOVE T1,Q2 ;YES, GET OUR NODE NUMBER
ADD T1,P3 ;GET OUR
MOVE T3,UDBP00(T1) ; STATUS
CALL CLRPDB ;(P3/) Clear all nodes' entries
MOVEM T3,UDBP00(T1) ;RESET OUR STATUS
SETOM UPDAT ;INDICATE RE-WRITE NEEDED
ENDIF.
ENDIF.
SKIPL T1,Q2 ;GET OUR NODE NUMBER
CALL PTHSTS ;(T1/T2) GET THE PATH STATUS
UPDOUT: SETO T2, ;NO CI
HRL T2,APRSER ;[8980] Get CPU serial number
ADD Q2,P3 ;GET UDB OFFSET
CAMN T2,UDBP00(Q2) ;OUR NODE INFO OK?
IFSKP.
MOVEM T2,UDBP00(Q2) ;NO, FIX IT
RET ;AND QUIT
ENDIF.
SKIPE UPDAT ;CHECK FOR RE-WRITE
RET ;REWRITE NECESSARY
RETSKP ;Do not rewrite the PDB
ENDSV.
;CLRPDB - CLEAR ALL NODES' ENTRIES IN THE UDB'S PDB
; CALL CLRNDS ;(/)
; RETURN +1
; PRESERVES ALL ACS
CLRPDB: SAVEAC <T1>
MOVSI T1,UDBNPR(P3) ;ZERO OUT TABLE
HRRI T1,UDBNPR+1(P3)
SETZM UDBNPR(P3) ;ZERO FIRST WORD
BLT T1,UDBP15(P3)
RET
;PHYSTC - CALLED BY PHYKLP WHEN A WIRE STATUS CHANGE OCCURS OR THE CI U-CODE
;IS STARTED
; CALL PHYSTC ;(/)
;RETURNS: +1
PHYSTC::SAVEPQ ;SAVE A FEW REGISTERS
SAVET ;T'S SO NOTHING IS LOST
MOVX P5,US.CHB ;SET A FEW REGISTERS BEFORE LOOP
MOVX P4,US.2PT ;CHECK ONLY TWO PORTED DISKS
MOVX Q2,US.TAP ;SET TAPE REGISTER
MOVEI Q1,CHNTAB ;POINTER TO CHANNEL TABLE
PHYSTL: CAILE Q1,CHNTAB+7 ;END OF CHANNEL TABLE?
RET ;ALL DONE QUIT
SKIPN P1,(Q1) ;FIND THE POINTER TO THE CDB
AOJA Q1,PHYSTL ;LOOK AT NEXT CHANNEL
CALL DGUMAP ;(P1/) CHECK ALL UDB'S ON THIS CHANNEL
CALL PCKOFL ; FOR DUAL PORT
AOJA Q1,PHYSTL ;LOOP TILL ALL DONE
;CALLED FOR EACH UDB FOUND BY DGUMAP
PCKOFL: TDNN Q2,UDBSTS(P3) ;CHECK FOR TAPE
TDNN P4,UDBSTS(P3) ;IS THIS A DUAL PORTED DRIVE?
RET ;NO FORGET IT
MOVX T1,U1.FED!U1.DCR ;IS THIS A DON'T CARE DISK OR A FRONT-END DISK?
SKIPN UDB2ND(P3) ;[8980] Or are both ports to this system?
TDNE T1,UDBST1(P3) ;THEN WE DON'T BOTHER IT
RET ;THEN DON'T BOTHER IT
MOVX T1,U1.STC ;SET STATUS CHANGE
IORM T1,UDBST1(P3)
IORM P5,UDBSTS(P3) ;SET THE CHECK HOME BLOCK BIT
RET
;PYCOFF - CALLED BY CFSSRV WHEN A CONNECTION IS BROKEN TO INSURE WE THROW ALL
;DISKS OFFLINE THAT ARE POTENTIALLY ACCESSED BY THE NODE
; T2/ CI NODE NUMBER
; CALL PYCOFF ;(T2/)
; RETURN +1
PYCOFF::SAVEPQ ;SAVE GENERAL REGISTERS
SETZM CFSSTS(T2) ;INDICATE THIS NODE IS OFFLINE FOR FUTURE DISKS
MOVEI Q1,CHNTAB ;LOOP THRU ALL UNITS TO SEE IF ANYTHING TO DO
MOVX P5,U1.STC!U1.OFS ;OFFLINE DUAL PORTED DISK FLAG
MOVX Q2,US.TAP ;TAPE IS ILLEGAL
PYCLOP: CAILE Q1,CHNTAB+7 ;DONE?
RET ;YES QUIT
SKIPN P1,(Q1) ;IS THERE A CDB?
AOJA Q1,PYCLOP ;NO TRY AGAIN
CALL DGUMAP ;(P1/) LOOP OVER ALL UNITS
CALL PYCOF1 ;CHECK STATUS
AOJA Q1,PYCLOP ;LOOP TILL DONE
;CALLED FOR EACH UDB FOUND BY DGUMAP
PYCOF1: MOVE P4,P3 ;FIND ADDRESS
ADD P4,T2 ;ADD IN OFFSET
TDNN Q2,UDBSTS(P3) ;CHECK FOR TAPE
SKIPN UDBP00(P4) ;HAS NODE EVER ACCESSED THE DISK??
RET ;NO
MOVX T1,US.2PT ;Yes, load multi-access bit
SKIPN UDB2ND(P3) ;[8980] Both ports on this system?
TDNN T1,UDBSTS(P3) ; or still multi-access?
RET ;Not multi access or bort ports on this system
MOVX T1,U1.FED!U1.DCR ;YES, FRONT-END
TDNE T1,UDBST1(P3) ; OR DON'T CARE?
RET ;YES
IORM P5,UDBST1(P3) ;NO, FORCE OFFLINE
MOVX T1,US.CHB ;NEED TO
IORM T1,UDBSTS(P3) ; CHECK HOMEBLOCKS
RET
;PYCON - CALLED BY CFSSRV WHEN A CONNECTION IS ESTABLISHED TO INSURE WE CHECK
;ALL DISKS THAT ARE POTENTIALLY ACCESSED BY THE NODE
; T2/ CI NODE NUMBER
; T3/ CPU SERIAL NUMBER
; CALL PYCON ;(T2,T3/)
; RETURN +1
PYCON:: SAVEPQ ;SAVE REGISTERS FOR SAFETY
HRLM T3,CFSSTS(T2) ;INDICATE THIS NODE IS ONLINE FOR FUTURE DISKS
MOVEI Q1,CHNTAB ;LOOP THRU ALL UNITS TO SEE IF ANYTHING TO DO
MOVX Q2,US.TAP ;CHECK FOR TAPE
PYCNLP: CAILE Q1,CHNTAB+7 ;CHECK ALL CHANNELS
RET ;NONE QUIT
SKIPN P1,(Q1) ;IS THERE A CDB?
AOJA Q1,PYCNLP ;NO TRY NEXT ONE
CALL DGUMAP ;(P1/) CHECK ALL UNITS
CALL PYCON2
AOJA Q1,PYCNLP ;DO ALL CHANNELS
;CALLED FOR EACH UDB FOUND BY DGUMAP
PYCON2: MOVE P4,P3 ;CHECK STATUS OF THIS NODE
ADD P4,T2 ;ADD THE NODE NUMBER
TDNN Q2,UDBSTS(P3) ;CHECK FOR TAPE NOT PERMITTED HERE
SKIPN UDBP00(P4) ;HAS NODE EVER ACCESSED THE DISK?
RET ;NO
MOVX T1,U1.STC ;YES, INSURE STATUS CHANGE
IORM T1,UDBST1(P3) ; IS SEEN JUST IN CASE
MOVX T1,US.CHB ;CHECK HOMEBLOCKS AGAIN FOR CHANGE
IORM T1,UDBSTS(P3)
RET ;AND QUIT
;PHYFED - CALLED BY DTESRV AT SYSTEM STARTUP TO DECLARE DISKS TO BE
;FRONT-END DISKS
; CALL PHYFED ;()
; RETURN +1
PHYFED::SAVEPQ ;SAVE DESTROYED REGISTERS
IOPIOF ;TURN OFF INTERRUPTS
MOVEI P5,CHNTAB ;FIRST CHANNEL
FELOOP: SKIPN P1,(P5) ;[7154] CHECK CHANNEL EXISTANCE
JRST FELPEN ;NO TRY NEXT
CALL DGUMAP ;[7154] (P1/P3) GET THE NEXT DISK
CALL FESET ;[7154] (P3/) SET THE FE DISK FLAG
FELPEN: CAIGE P5,CHNTAB+7 ;[7340]DONE?
AOJA P5,FELOOP ;[7340]NO. LOOP BACK
IOPION ;[7340]FINISHED. INTERRUPTS BACK ON
RET ;ALL DONE
;FESET - FORCES HOMEBLOCK CHECK ON ALL UNITS AND SETS FE DISK INDICATOR IN
;APPROPRIATE UDBS
; P3/ UDB
; CALL FESET ;(P3)
; RETURN +1
FESET: MOVX T1,US.TAP ;CHECK FOR DISK
TDNE T1,UDBSTS(P3) ;CHECK FOR NOT TAPE
RET ;NOT THE CORRECT THING
MOVX T1,U1.STC ;SET STATUS CHANGES
IORM T1,UDBST1(P3)
MOVX T1,US.CHB ;FORCE HOMEBLOCK CHECK ON ALL
IORM T1,UDBSTS(P3) ;
HRRZ T3,UDBDSN(P3) ;GET SERIAL NUMBER
LOAD T1,USTYP,(P3) ;[7154] GET UNIT TYPE
CAIE T1,.UTRP6 ;[7154] IS IT AN RP06
CAIN T1,.UTRP4 ;[7154] OR AN RP04?
SKIPA ;[7154] YES, MAYBE CONNECTED TO FE
RET ;[7154] NO, THEN IT'S NOT CONNECTED TO FE
MOVSI T2,-FEDSKL ;[7154] MAKE AOBJN WORD FOR SEARCHING FE LIST
FELOP1: SKIPN T4,FEDSKT(T2) ;[7154] FE KNOW THIS UNIT?
IFSKP. ;[7154]
CAME T4,T3 ;[7154] YES, IS THIS IT'S UDB?
ANSKP. ;[7154]
MOVX T4,U1.FED ;[7154] YES, SET
IORM T4,UDBST1(P3) ;[7154] FE DISK
RET ;[7154] FOUND THE ONE, QUIT
ENDIF. ;[7154]
AOBJN T2,FELOP1 ;[7154] CHECK ALL UNITS IN FE LIST
RET ;[7154]
SUBTTL Error Recovery
;HERE TO ATTEMPT RESTART OF A FAILED IORB
;Called IOPIOF.
;Returns with IOPIOF and
; +1 failed to restart
; +2 did a restart
UNITRY: SAVEQ ;PRESERVE REGISTERS
MOVX T1,US.ACT!US.CIP ;GET UNIT ACTIVE FLAGS
MOVX T2,KS.ACT ;AND CONTROLLER ACTIVE FLAGS
TRNE P2,-1 ;KDB ?
TDNN T2,KDBSTS(P2) ;ACTIVE?
TDNE T1,UDBSTS(P3) ;ACTIVE?
RET ;Yes. Who knows?
HRRZ P4,UDBTWQ(P3) ;ANY TRANSFERS PENDING?
JUMPN P4,UNITR2 ;YES - ATTEMPT RESTART
UNITR7: HRRZ P4,UDBPWQ(P3) ;ANY SEEKS?
JUMPN P4,UNITR1 ;YES - RESTART
RETSKP ;AND SAY SO.
UNITR1: SKIPE T4,UDBCHB(P3) ;CHECK FOR A HOMEBLOCK REQUEST
CALL FRHOMB ;HOMEBLOCK FIRST
CALL STRTPS ;RESTART POSITION OPERATION
RET ;Failed
RETSKP ;Success
UNITR2: MOVE T1,CDBSTS(P1) ;GET CHANNEL STATUS
TXNE T1,CS.ACT ;ACTIVE?
RET ;Yes. Can't proceed
SKIPE PHYSEC ;MINUTE BOUNDARY?
JRST UNITR3 ;NO, SKIP ON
MOVX T1,US.DSK ;GET DISK FLAG READY
MOVX T2,US.WLK ;AND WRITE-LOCKED FLAG READY
TDNE T1,UDBSTS(P3) ;IS THIS A DISK?
ANDCAM T2,UDBSTS(P3) ;YES, ALLOW RP20S TO TRY WRITING AGAIN
UNITR3: SKIPE T2,UDBCHB(P3) ;IS THERE A HOMEBLOCK IORB?
CAMN T2,P4 ;AND IS IT THE ONE WE ARE WORKING ON?
CALLRET STRTIO ;YES THEREFORE START IT
UNITR5: CALL OFFTWQ ;FROM THE TWQ
CALL ONFPWQ ;PUT IT ON THE PWQ
HRRZ T1,UDBTWQ(P3) ;CHECK FOR ANOTHER ENTRY
JUMPN T1,UNITR5 ;TRY AGAIN
JRST UNITR7 ;GO TRY TO START HOMEBLOCK REQUEST
FRHOMB: CAMN P4,UDBCHB(P3) ;CHECK TO SEE IF THIS IS THE HOMEBLOCK ENTRY
RET ;QUIT NOW WE GOT IT (SURPRISE)
HRRZ T2,UDBPWQ(P3) ;GET THE BEGINNING OF THE QUEUE
FRHBLP: MOVE T1,T2 ;POINTER TO PREVIOUS
HRRZ T2,IRBLNK(T1) ;GET THE FORWARD LINK
JUMPE T2,[ BUG.(HLT,HOMGON,PHYSIO,SOFT,<FRTHOB - Missing homeblock IORB>,<<P1,CHN>,<P2,KONT>,<P3,UNIT>>,<
Cause: Missing homeblock IORB when we believe there should be one on the PWQ.
Data: CHN - The channel number
KONT - The controller number
UNIT - The unit number
>)]
CAME T2,T4 ;FOUND THE IORB
JRST FRHBLP ;NOT FOUND TRY NEXT ONE
MOVE P4,T2 ;SET UP FOR RETURN IORB
CALL CONSPW ;REMOVE THIS IORB
MOVE T1,P4 ;INSERT IT ON THE FRONT OF THE QUEUE
CALLRET ONFPWQ ;PUT IT ON THE PWQ AND QUIT
;HERE TO TERMINATE A HUNG IORB AND RESTART CHANNEL ACTIVITY
;T1/ IORB
;P1 SETUP
;WIPES THE REGISTERS
;MUST BE CALLED IOPIOF
HNGIRB: MOVE P4,T1 ;SETUP IORB IN EXPECTED PLACE
MOVX T1,US.REW!US.ORC ;CLEAR REWINDING STATUS
ANDCAB T1,UDBSTS(P3) ; IN THE UDB (ALSO LOAD UDBSTS INTO T1)
TXNE T1,US.POS ;WAS THIS A POSITION REQUEST?
JRST HNGIR1 ;YES
HRRZ T1,CDBDSP(P1) ;GET CHANNEL DISPATCH
CALL CDSHNG(T1) ;DO HUNG RESET
MOVX T1,US.CIP
TDNE T1,UDBSTS(P3) ;IS IT A CI DISK?
RET ;YES. MAYBE IT WILL COME BACK LATER
CALL CLRACT ;NO, RESET ALL ACTIVE BITS
MOVX T1,IS.NRT!IS.DVE ;GET ERROR FLAGS READY
IORM T1,IRBSTS(P4) ;IN ALL CASES MARK IORB AS FAILED
CALL DONIRB ;POST AS COMPLETE
CALL SCHSEK ;START SEEKS (IF APPROPRIATE)
CALL SCHXFR ;RESTART CHANNEL IF ANY WORK
RET
;HERE TO CLEAN UP AFTER A HUNG SEEK
HNGIR1: TRNN P2,-1 ;ANY CONTROLLER?
JRST HNGIR2 ;NOPE, SKIP ON
HRRZ T1,KDBACT(P2) ;YES, GET ACTIVE UNIT IF ANY
CAIE T1,(P3) ;WAS CONTROLLER BUSY FOR THIS DRIVE?
JRST HNGIR2 ;NOPE, SKIP ON
HRRZ T1,UDBDSP(P3) ;YES, GET DISPATCH ADDRESS
CALL UDSHNG(T1) ;DO HUNG DEVICE RECOVERY
CALL CLRPOS ;CLEAR ACTIVE BITS FOR CONTROLLER AND UNIT
SKIPA ;SKIP INTO REST
HNGIR2: CALL CLRSRC ;CLEAR ACTIVE BITS FOR UNIT
MOVX T1,IS.NRT!IS.DVE ;GET ERROR FLAGS READY
MOVX T2,US.DSK ;IF THIS IS A DISK, THEY DO IMPLIED SEEKS
TDNN T2,UDBSTS(P3) ;SO THAT POSITIONING ERRORS CAN BE IGNORED
IORM T1,IRBSTS(P4) ;BUT IF NOT A DISK, FLAG AN ERROR
CALL DONIRB ;MARK THE IORB AS COMPLETE
CALL SCHSEK ;START ANOTHER SEEK
MOVX T1,CS.ACT!CS.ERC ;CHANNEL NOW IDLE?
TDNN T1,CDBSTS(P1) ; ???
CALL SCHXFR ;YES - SEE IF ANYTHING ELSE TO DO
RET
;HERE TO ISSUE A MESSAGE TO THE OPERATOR
; T1/ POINTER TO INITIAL MESSAGE
; P3/ UDB
UNIMES: SAVEPQ ;PRESERVE REGISTERS
HRRZ P1,UDBCDB(P3) ;PICK UP CHANNEL NUMBER
HRRZ P2,UDBKDB(P3) ;PICK UP CONTROLLER NUMBER
CALL PMES ;PRINT START OF MESSAGE
MOVX T1,US.TAP ;MAGTAPE?
TDNE T1,UDBSTS(P3) ; ???
JRST UNIMS5 ;YES, PRINT OUT "MTAN"
LDB T1,USYTYP ;GET UNIT TYPE
MOVE T1,NAMUTP(T1) ;GET NAME AS STRING POINTER
CALL PMES ;PRINT TYPE
HRRZ CX,UDBSTR(P3) ;GET STRUCTURE
SKIPL Q1,UDBSTR(P3) ;UNIT IN STR?
SKIPN Q1,STRTAB(CX) ; ???
JRST UNIMS0 ;NO
HRROI T1,[ASCIZ /, STR=/]
CALL PMES ;YES - PRINT NAME
HRRZ Q1,Q1
MOVE T1,SDBNAM(Q1) ;COPY STR NAME
CALL PSIX ;PRINT IT
UNIMS0: SKIPN UDBDSN(P3) ;SERIAL NUMBER KNOWN?
JRST UNIMS2 ;NO - SKIP THAT PART
HRROI T1,[ASCIZ /, S.N.=/]
CALL PMES ;PREPARE TO PRINT SERIAL
MOVE T1,UDBDSN(P3) ;GET SERIAL NUMBER
CALL PNUM ;PRINT THE SERIAL NUMBER
UNIMS2: HRROI T1,[ASCIZ /
Access path: CHN=/] ;PREPARE NEXT PART
CALL PMES ;PRINT
HRRZ T1,CDBADR(P1) ;GET CHANNEL NUMBER
CALL PNUM ;PRINT IT
JUMPN P2,UNIMS4 ;IF KDB, PRINT APPROPRIATE MESSAGE
UNIMS3: HRROI T1,[ASCIZ /, UNI=/] ;PREPARE NEXT
CALL PMES
HRRZ T1,UDBAKA(P3) ;GET ADDRESS
TRNE P2,-1 ;UNLESS HAVE A CONTROLLER
HRRZ T1,UDBSLV(P3) ;IN WHICH CASE, SUBUNIT IS HERE
CALL PNUM ;PRINT IT
HRROI T1,[ASCIZ /
/]
CALL PMES ;FINISH IT OFF
RET
;HERE WHEN A CONTROLLER IS IN THE WAY
UNIMS4: HRROI T1,[ASCIZ /, /]
CALL PMES ;PREPARE TO PRINT KON TYPE
EXCH P2,P3 ;GET KDB IN P3
LDB T1,USYTYP ;GET UNIT TYPE
EXCH P2,P3 ;REPLACE KDB,UDB
MOVE T1,NAMUTP(T1) ;GET KON TYPE
CALL PMES ;PRINT IT
HRROI T1,[ASCIZ /=/]
CALL PMES ;ANNOUNCE OBJECT
HRRZ T1,UDBAKA(P3) ;GET ADDRESS
CALL PNUM ;PRINT IT
JRST UNIMS3 ;JOIN ABOVE
UNIMS5: HRROI T1,[ASCIZ/MTA/]
CALL PMES ;GIVE LOGICAL UNIT NUMBER
MOVSI Q1,-MTAN ;LOOK FOR THIS UNIT
UNIMS6: HRRZ T1,MTCUTB(Q1) ;GET UDB ADR
CAIN T1,(P3) ;FOUND THE UNIT YET?
JRST UNIMS7 ;YES
AOBJN Q1,UNIMS6 ;NO, LOOP BACK TIL FOUND
JRST UNIMS0 ;NOT FOUND SO DONT GIVE UNIT NUMBER
UNIMS7: HRRZS Q1 ;GET UNIT NUMBER
MOVE T1,Q1
CALL PNUM
JRST UNIMS0 ;GO CONTINUE MESSAGE
;HERE TO PRINT A SMALL NUMBER (FOUR DIGITS OR LESS) IN T1 AS A DECIMAL NUMBER
PNUM:: SETZ T3, ;[7.1011] CLEAR RESULT
PNUMLP: IDIVI T1,^D10 ;SPLIT OFF A DIGIT
ADDI T2,"0" ;CONVERT REMAINDER TO ASCII
LSHC T2,-7 ;STORE WITH OTHER CHARACTERS IN T3
JUMPN T1,PNUMLP ;PROCEED IF NOT DONE YET
TRZ T3,377 ;INSURE A NULL EXISTS
PUSH P,T3 ;SAVE RESULT
HRROI T1,(P) ;POINT TO WORD
CALL PMES ;TYPE NUMBER
JRST PA1 ;SCRAP STACK AND RETURN
;HERE TO PRINT T1 IN SIXBIT
PSIX: MOVE T2,T1 ;COPY ARG
ADJSP P,2 ;ALLOC STRING SPACE (STACK ALMOST GONE)
HRRZI T3,-1(P) ;GET START OF STRING
HRLI T3,(<POINT 7,.-.>) ;BUILD BYTE POINTER
PSIX1: MOVEI T1,0 ;CLEAR T1
LSHC T1,6 ;GET A CHAR FROM ARG
SKIPE T1 ;IF NOT END
ADDI T1,40 ;MAKE LIKE ASCII
IDPB T1,T3 ;STORE IN OUTPUT STRING
JUMPN T1,PSIX1 ;LOOP
HRROI T1,-1(P) ;BUILD STRING POINTER
CALL PMES ;PRINT STRING
ADJSP P,-2 ;SCRAP STACK
RET ;DONE
PHCVBO::MOVE T4,T1 ;SAVE THE NUMBER GIVEN
LDB T1,[POINT 4,T4,23] ;GET HIGH ORDER DIGIT
IMULI T1,^D10 ;MULT BY 10
LDB T2,[POINT 4,T4,27] ;GET 2ND DIGIT
ADD T1,T2 ;ADD TO NUMBER
IMULI T1,^D10
LDB T2,[POINT 4,T4,31] ;GET THIRD DIGIT
ADD T1,T2
IMULI T1,^D10
LDB T2,[POINT 4,T4,35] ;LAST DIGIT
ADD T1,T2 ;LAST ONE
RET ;RETURN
SUBTTL Mountable Structure Support Routines
;ROUTINE TO SET UP UDBSTR AND SDBUDB DURING MOUNTING OF A STRUCTURE
;
;ACCEPTS IN T1/ UNIT'S CKU NUMBERS (CHANNEL, CONTROLLER, UNIT NUMBERS)
; T2/ UNIT NUMBER IN STRUCTURE,,STRUCTURE NUMBER
; T3/ ADDRESS OF SDB
; CALL SETSTR
;RETURNS: +1 ALWAYS
SWAPCD
SETSTR::STKVAR <STRSTN,SDBADR> ;ALLOCATE STORAGE
MOVEM T2,STRSTN ;SAVE STRUCTURE NUMBER
MOVEM T3,SDBADR ;AND SDB ADDRESS
CALL CKUNPK ;UNPACK THE CKU NUMBERS
CALL CHKCKU ;THEN FIND THE UDB ADDRESS
BUG.(HLT,UNFWSS,PHYSIO,SOFT,<Unit not found creating SDB for structure>,,<
Cause: The routine SETSTR was called to build an SDB for a structure. One of
its arguments is the channel, controller, and unit numbers of a unit
which had already been known to exist. But when the routine CHKCKU was
called to find the UDB of the unit, the routine failed to find the
unit.
>) ;SHOULD BE THERE!
HLRZ T2,STRSTN ;GET LOGICAL UNIT NUMBER WITHIN THE STRUCTURE
ADD T2,SDBADR ;ADD IN SDB ADDRESS
MOVEM T1,SDBUDB(T2) ;STORE UDB ADDRESS IN SDB
MOVE T2,STRSTN ;GET BACK UNIT,,STRUCTURE NUMBERS
MOVEM T2,UDBSTR(T1) ;STORE THEM IN THE UDB
MOVEI T2,ST%MNT ;REASON FOR THE ENTRY
CALLRET LGSTAT ;LOG THE DRIVE'S STATISTICS, RETURN
;ROUTINE TO CLEAR THE UDBSTR AND SDBUDB ENTRIES FOR ALL UNITS IN
;A STRUCTURE.
;
;CALL:
;ACCEPTS IN T1/ SDB ADDRESS
; CALL CLRSTR
;RETURNS: +1 ALWAYS
CLRSTR::SAVEAC <P1> ;SAVE AN AC
MOVN P1,SDBNUM(T1) ;MAKE AOBJN WORD FROM # OF UNITS IN STRUCTURE
HRLZ P1,P1 ;PUT NEGATIVE COUNT IN LEFT HALF
HRR P1,T1 ;AND SDB ADDRESS IN RIGHT HALF
; LOOP OVER ALL UNITS IN THE STRUCTURE
CLRST2: MOVE T1,SDBUDB(P1) ;GET ADDRESS OF UNIT DATA BLOCK
JUMPE T1,CLRST3 ;IF NONE SETUP GO TO NEXT
SETZM SDBUDB(P1) ;CLEAR POINTER TO UNIT DATA BLOCK
SETOM UDBSTR(T1) ;CLEAR STRUCTURE INFORMATION IN UDB
MOVEI T2,ST%DMT ;REASON FOR THE ENTRY
CALL LGSTAT ;LOG THE DRIVE'S STATISTICS
CLRST3: AOBJN P1,CLRST2 ;LOOP OVER ALL UNITS IN THE STRUCTURE
RET ;RETURN
;ROUTINE TO RETURN STRUCTURE NUMBER OF WHICH A GIVEN UNIT IS A PART
;
;ACCEPTS: T1/ UDB ADDRESS OF UNIT
; CALL GETSTR
;RETURNS: +1 FAILED, UNIT OFFLINE OR IN MAINT MODE, WITH T1/ FLAGS
; +2 SUCCESS, WITH T1/ UNIT WITHIN STRUCTURE,,STRUCTURE NUMBER
; OR -1 IF UNIT NOT IN STRUCTURE
; T2/ UNIT TYPE
; T3/ FLAGS:
; MS%WLK IF UNIT IS WRITE LOCKED
RESCD ;[7.1081]
GETSTR::MOVE T4,UDBSTS(T1) ;GRAB UDB STATUS
SETZ T3, ;CLEAR FLAGS TO RETURN
TXNE T4,US.OFS ;UNIT OFF-LINE?
TXO T3,MS%OFL ;YES, MARK IT
MOVE T2,UDBST1(T1) ;Get secondary status word
TXNE T2,U1.OFS ;Is it forced offline by TOPS-20?
TXO T3,MS%IAC ;Yes, mark it
TXNE T4,US.MAI ;IN MAINTENANCE MODE?
TXO T3,MS%DIA ;YES, MARK IT
TXNE T4,US.WLK ;WRITE-LOCKED?
TXO T3,MS%WLK ;YES, MARK IT
MOVE T2,UDBCHR(T1) ;GET CHARACTERISTICS WORD
TXNE T2,UC.OLB ;IS UNIT SERVED (ONLINE VIA MSCP SERVER)
TXO T3,MS%SVD ;YES, MARK IT
;Figure out if unit is currently dual-ported to an unother KL
TXNN T4,US.OFS!US.CIP ;OFF LINE OR ON THE CI?
TXNN T4,US.PGM ;NO, DUAL-PORTED?
JRST GETST1 ;NOT INTERESTING
MOVE T4,UDBST1(T1) ;GET SECOND STATUS WORD
TXNE T4,U1.FED!U1.DCR ;FRONT-END OR DON'T-CARE DISK?
JRST GETST1 ;YES, NOT INTERESTING
SKIPN UDB2ND(T1) ;NO, BOTH PATHS TO US?
TXO T3,MS%2PT ;NO, 1 PORT TO AN UNKNOWN SYSTEM
GETST1: LDB T2,[POINT USSTYP,UDBSTS(T1),USPTYP] ;GET UNIT TYPE
MOVE T1,UDBSTR(T1) ;GET STRUCTURE NUMBER FOR THIS UNIT
TXNN T3,MS%OFL!MS%DIA ;ANY FATAL ERRORS?
RETSKP ;NOPE, SUCCESSFUL RETURN
MOVE T1,T3 ;YES, COPY FLAGS
RET ;GIVE ERROR RETURN
SUBTTL Subroutines
;ROUTINE TO ACCEPT CHANNEL, CONTROLLER, AND UNIT NUMBERS AND
;FIND THE UDB WITH THE SPECIFIED ADDRESS. CALL:
; T1/ CHANNEL NUMBER
; T2/ CONTROLLER NUMBER OR -1 IF NONE
; T3/ UNIT NUMBER
; T4/ 0 TO ALLOW ANY KIND OF UDB, OR -1 TO ONLY ALLOW DISKS
;RETURNS: +1: ARGUMENTS ARE ILLEGAL OR UNIT CANNOT BE FOUND
; T1/ ERROR CODE
; +2: SPECIFIED UDB FOUND
; T1/ UDB ADDRESS
; T2/ UNIT TYPE
;CALL CHKCKU FOR NORMAL CASE WHERE ONLY DISK UNITS ARE ALLOWED.
;CALL CHKCKS IF UNIT NUMBERS ARE "RELATIVE" RATHER THAN ABSOLUTE
RESCD
CHKCKS::SAVEPQ
SETOM T4 ;ONLY DISKS
SETOM Q3 ;KONTROLLER RELATIVE
JRST CHKCK2
CHKCKU::SETOM T4 ;REMEMBER TO ONLY PERMIT DISKS
CHKCKA::SAVEPQ ;SAVE SOME ACS
SETZM Q3
CHKCK2: MOVE Q1,T4 ;REMEMBER DISK ONLY FLAG
SKIPL T1 ;SEE IF CHANNEL NUMBER IS TOO SMALL
CAIL T1,CHNN ;OR TOO LARGE
RETBAD (MSTX14) ;YES, "INVALID CHANNEL NUMBER"
SKIPN P1,CHNTAB(T1) ;GET CDB ADDRESS
RETBAD (MSTX41) ;NONE, "CHANNEL DOES NOT EXIST"
HLRE T1,CDBIUN(P1) ;GET NUMBER OF UNITS
MOVMS T1 ;MAKE POSITIVE
HRRZ T4,CDBIUN(P1) ;ALSO GET ADDRESS OF UDB/KDB TABLE
CAME T2,[-1] ;SEE IF A CONTROLLER IS SPECIFIED
JRST CHKISK ;YES, SKIP ON
;HERE IN THE CASE THAT NO CONTROLLER IS SPECIFIED. CHECK TO MAKE SURE
;THAT THE UNIT NUMBER GIVEN IS LEGAL AND IS IN FACT A UDB INSTEAD OF A KDB.
CHKUNT: SKIPL T3 ;UNIT NUMBER TOO SMALL?
CAML T3,T1 ;OR TOO LARGE?
RETBAD (MSTX15) ;YES, "INVALID UNIT NUMBER"
ADD T3,T4 ;MAKE ADDRESS OF UDB POINTER
SKIPN P3,(T3) ;GET UDB ADDRESS
RETBAD (DIAGX9) ;NONE, "UNIT DOES NOT EXIST"
LDB T4,USYBKT ;GET BLOCK TYPE
CAIE T4,.BTUDB ;MAKE SURE IT IS A UDB
RETBAD (DIAGX9) ;NOPE, "UNIT DOES NOT EXIST"
JRST CHKHVU ;OK, GO FINISH UP
;HERE IN THE CASE THAT A CONTROLLER NUMBER WAS GIVEN. CHECK ITS LEGALITY,
;AND MAKE SURE THAT A KDB WAS SPECIFIED INSTEAD OF A UDB. FINALLY, THEN
;CHECK TO SEE THAT THE UNIT NUMBER IS LEGAL.
CHKISK: SKIPL T2 ;SEE IF CONTROLLER NUMBER IS TOO SMALL
CAML T2,T1 ;OR TOO LARGE
RETBAD (MSTX16) ;YES, "INVALID CONTROLLER NUMBER"
ADD T2,T4 ;MAKE ADDRESS OF KDB POINTER
SKIPN P2,(T2) ;GET KDB ADDRESS
RETBAD (MSTX42) ;NONE, "CONTROLLER DOES NOT EXIST"
MOVE P3,P2 ;COPY FOR LDB
LDB T4,USYBKT ;GET BLOCK TYPE
CAIE T4,.BTKDB ;MAKE SURE IT'S A KDB AND NOT A UDB
RETBAD (MSTX42) ;NOPE, THEN "CONTROLLER DOES NOT EXIST"
HLRE T1,KDBIUN(P2) ;GET NUMBER OF UNITS
MOVMS T1 ;MAKE POSITIVE
HRRZ T4,KDBIUN(P2) ;ALSO GET ADDRESS OF UDB TABLE
SKIPE Q3 ;SPECIAL "RELATIVE" UNIT NUMBER
JRST CHKUNT ;YES
MOVE Q2,T3 ;COPY OVER UNIT NUMBER
HRRZ T1,KDBDSP(P2) ;GET DISPATCH ADDRESS
CALL UDSEXT(T1) ;CHECK TO SEE IF UNIT IS VALID
JRST [ SKIPN T1 ;BAD UNIT, DETERMINE WHY
RETBAD(MSTX15) ;IT'S "INVALID UNIT NUMBER"
RETBAD(DIAGX9)] ;IT'S "UNIT DOES NOT EXIST"
CHKHVU: MOVE T1,UDBSTS(P3) ;GET STATUS
TXNN T1,US.TPD ;NO UNIT IF A "3-PORTED" DISK
SKIPGE UDB2ND(P3) ;NO UNIT IF 2ND PORT OF A DUAL-PORTED DRIVE
RETBAD (DIAGX9) ;NONE, "UNIT DOES NOT EXIST"
MOVE T1,P3 ;GET UDB FOUND
LDB T2,USYTYP ;AND THE UNIT TYPE
JUMPE Q1,RSKP ;DONE IF ANY KIND OF UDB IS ALLOWED
MOVX T3,US.DSK ;GET DISK BIT READY
TDNN T3,UDBSTS(P3) ;IS THIS A DISK DEVICE?
RETBAD (MSTX27) ;NO, "SPECIFIED UNIT IS NOT A DISK"
RETSKP ;IT'S A DISK, GOOD RETURN
;ROUTINE TO ADVANCE TO THE NEXT UDB IN THE SYSTEM BY SCANNING ALL
;CHANNELS, CONTROLLERS, AND UNITS. CALL:
; T1/ CHANNEL NUMBER, OR -1 TO START AT BEGINNING
; T2/ CONTROLLER NUMBER OR -1 FOR NONE
; T3/ UNIT NUMBER, OR -1 TO START WITH FIRST ONE
; T4/ 0 TO ALLOW ANY KIND OF UDB, OR -1 TO ONLY ALLOW DISKS
;RETURNS: +1: NO MORE UNITS IN SYSTEM
; +2: NEXT UNIT FOUND
; T1/ NEW CHANNEL NUMBER
; T2/ NEW CONTROLLER NUMBER OR -1 IF NONE
; T3/ NEW UNIT NUMBER
; T4/ UDB FOR THIS UNIT
;SEARCHING IS DONE BY INCREMENTING FIRST THE UNIT NUMBER, THEN THE
;CONTROLLER NUMBER, AND LASTLY THE CHANNEL NUMBER. THE CASE WHERE
;NO CONTROLLER EXISTS IS HANDLED SIMPLY AS "CONTROLLER NUMBER -1".
;CALL ADVCKU FOR NORMAL CASE WHICH ONLY ALLOWS DISK UNITS.
;CALL ADVCKS WHEN USING "RELATIVE" UNIT NUMBERING
ADVCKS::SAVEPQ
SETOM Q3 ;RELATIVE UNIT NUMBERS
JRST ADVCK0
ADVCKU::SETOM T4 ;ASSUME ONLY WANT DISKS
ADVCKA::SAVEPQ ;SAVE ACS
SETZM Q3 ;ABSOLUTE UNIT NUMBERS
ADVCK0: ASUBR <ACHAN,ACTRL,AUNIT,ATYPE> ;SAVE CALLING ARGUMENTS
CAMN T1,[-1] ;WANTS TO START WITH FIRST CHANNEL?
JRST ADVCHN ;YES, GO DO IT
NXTUNI: DMOVE T1,ACHAN ;SET UP TWO OF THE ARGUMENTS
AOS T3,AUNIT ;ADVANCE TO NEXT UNIT
MOVE T4,ATYPE ;GET FLAG READY ALSO
CALL CHKCK2 ;SEE IF THIS COMBINATION IS LEGAL
JRST ADVERR ;NO, GO SEE WHY
MOVE T4,T1 ;MOVE UDB TO CORRECT AC
DMOVE T1,ACHAN ;RESTORE NEW CHANNEL AND CONTROLLER NUMBERS
MOVE T3,AUNIT ;ALSO RESTORE NEW UNIT NUMBER
RETSKP ;DONE
;HERE WHEN A PARTICULAR COMBINATION ISN'T VALID. DETERMINE WHY, AND
;THEN MOVE TO THE NEXT UNIT, CONTROLLER, OR CHANNEL AS APPROPRIATE.
ADVERR: CAIN T1,MSTX14 ;INVALID CHANNEL NUMBER?
RET ;YES, ALL DONE
CAIE T1,MSTX41 ;CHANNEL NOT THERE?
CAIN T1,MSTX16 ;OR INVALID CONTROLLER NUMBER?
JRST ADVCHN ;YES, GO TO NEXT CHANNEL
CAIE T1,MSTX42 ;CONTROLLER NOT THERE?
CAIN T1,MSTX15 ;OR INVALID UNIT NUMBER?
JRST ADVCTL ;YES, ADVANCE TO NEXT CONTROLLER
JRST NXTUNI ;NO, MOVE TO NEXT UNIT
;ROUTINES TO ADVANCE CHANNELS OR CONTROLLERS.
ADVCHN: SETOM ACTRL ;RESET CONTROLLER NUMBER BACK TO -1
AOSA ACHAN ;MOVE TO NEXT CHANNEL NUMBER AND SKIP
ADVCTL: AOS ACTRL ;MOVE TO NEXT CONTROLLER NUMBER
SETOM AUNIT ;START WITH FIRST UNIT
JRST NXTUNI ;GO EXAMINE IT
;SIMPLE ROUTINES TO PACK AND UNPACK THE CKU NUMBERS FOR A UNIT.
;CALL FOR CKUPAK:
; T1/ CHANNEL NUMBER
; T2/ CONTROLLER NUMBER OR -1 IF NONE
; T3/ UNIT NUMBER
;RETURNS +1: ALWAYS
; T1/ CKU NUMBER
;
;CALL FOR CKUNPK:
; T1/ CKU NUMBER
;RETURNS +1: ALWAYS
; T1/ CHANNEL NUMBER
; T2/ CONTROLLER NUMBER OR -1 IF NONE
; T3/ UNIT NUMBER
CKUPAK::STOR T1,DOP%C2,T1 ;POSITION THE CHANNEL NUMBER
STOR T2,DOP%K2,T1 ;STORE THE CONTROLLER NUMBER
STOR T3,DOP%U2,T1 ;AND FINALLY THE UNIT NUMBER
RET ;DONE
CKUNPK::LOAD T3,DOP%U2,T1 ;EXTRACT THE UNIT NUMBER
LOAD T2,DOP%K2,T1 ;AND THE CONTROLLER NUMBER
CAIN T2,<.RTJST(-1,DOP%K2)> ;WAS FIELD ALL ONES?
SETOM T2 ;YES, SET NO CONTROLLER THEN
LOAD T1,DOP%C2,T1 ;FINALLY EXTRACT THE CHANNEL NUMBER
RET ;DONE
;HERE TO EXECUTE AN INSTRUCTION ONCE FOR EACH UDB ON A CHANNEL
;CALL DGUMAP
; INSTRUCTION TO EXECUTE
;THE INSTRUCTION WILL BE EXECUTED ONCE WITH P3 SETUP TO EACH UDB
;THIS ROUTINE CLOBBERS Q3
DGUMAP::MOVE Q3,CDBIUN(P1) ;GET AOBJN WORD
DGUMP1: SKIPN P3,(Q3) ;UDB PRESENT?
JRST DGUMP2 ;NO - TRY NEXT
LDB T1,USYBKT ;GET BLOCK TYPE
CAIE T1,.BTUDB ;UDB ?
JRST DGUMP3 ;IS KDB, LOOP FOR IT
MOVEI P2,0 ;IF NO KDB, PROVIDE A ZERO
XCT @(P) ;EXECUTE INSTRUCTION
DGUMP2: AOBJN Q3,DGUMP1 ;LOOP
RETSKP ;DONE
DGUMP3: MOVE P2,P3 ;COPY KDB
PUSH P,Q3 ;SAVE AOBJN POINTER
MOVE Q3,KDBIUN(P2) ;GET NEW ONE FOR KDB'S UNITS
DGUMP4: SKIPE P3,(Q3) ;UDB PRESENT?
XCT @-1(P) ;YES, DO INSTRUCTION
AOBJN Q3,DGUMP4 ;LOOP FOR MORE
POP P,Q3 ;RESTORE ORIGINAL AOBJN WORD
MOVEI P2,0 ;ENSURE NIL KDB
JRST DGUMP2 ;CONTINUE OUTER LOOP
; DCUNIT ROUTINE TO SET/CLEAR DON'T CARE BIT
;
;[9058] Called with T2/ address of 3 word user argument block
; argblock+0/ controller number
; argblock+1/ kontroller number or -1
; argblock+2/ unit number
DCUNIT::UMOVE T1,.SVDCC(T2) ;[9058] Get channel number
UMOVE T3,.SVDCU(T2) ;[9058] Get unit number
UMOVE T2,.SVDCK(T2) ;[9058] Get controller number
SETO T4, ;DISKS ONLY
NOSKED ;NO INTERRUPTS
IOPIOF ;TURN OFF INTERRUPTS TO PREVENT CHANGES
CALL CHKCKU ;CHECK FOR LEGAL
JRST DCUBAD ;[9058] Bad, return error
MOVX T2,U1.DCU ;SET DON'T-CARE DRIVE
IORM T2,UDBST1(T1) ; IN UDB
MOVX T2,U1.OFS ;SET DRIVE ONLINE
ANDCAM T2,UDBST1(T1) ;SO WE CAN FIND IT
CALL PHYSTC ;CAUSE HOMEBLOCK CHECKING
IOPION ;TURN ON INTERRUPTS
OKSKED
MRETNG ;RETURN OK
DCUBAD: IOPION ;ENABLE INTERRUPTS
OKSKED ;AND SCHED
ITERR () ;[9058] and return error
SUBTTL End of PHYSIO
TNXEND
END