Trailing-Edge
-
PDP-10 Archives
-
BB-M081R-SM
-
monitor-sources/d36par.mac
There are 26 other files named d36par.mac in the archive. Click here to see a list.
; UPD ID= 8676, RIP:<7.MONITOR>D36PAR.MAC.4, 3-Mar-88 14:48:53 by RASPUZZI
;TCO 7.1251 - Bump size of signal queue up to prevent annoying NTMSQFs.
; UPD ID= 8499, RIP:<7.MONITOR>D36PAR.MAC.3, 9-Feb-88 14:51:13 by GSCOTT
;TCO 7.1218 - Update copyright notice.
; *** Edit 7318 to D36PAR.MAC by MCCOLLUM on 11-Jun-86, for SPR #21246
; Alter PARAMETER macro to store values in full words and change some network
; management parameters to accept values in millseconds
; UPD ID= 2211, SNARK:<6.1.MONITOR>D36PAR.MAC.121, 11-Jun-85 13:51:34 by PALMIERI
;TCO 6.1.1440 Re-instate FIXADJ macro to compensate for bug in negative ADJBP
; UPD ID= 2060, SNARK:<6.1.MONITOR>D36PAR.MAC.120, 3-Jun-85 14:27:26 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 1973, SNARK:<6.1.MONITOR>D36PAR.MAC.119, 13-May-85 18:13:53 by GLINDELL
;Add comments to BEGSTR's for documentors of "6.1 monitor tables"
; UPD ID= 1661, SNARK:<6.1.MONITOR>D36PAR.MAC.118, 21-Mar-85 17:53:40 by PALMIERI
;Remove FTPARANOID from MB and EL BEGSTRs so we don't need 2 different DCNSPYs,
;DNSNUPs, and DNTATLs.
; UPD ID= 1650, SNARK:<6.1.MONITOR>D36PAR.MAC.117, 18-Mar-85 16:41:29 by PALMIERI
;Add new circuit state value RCS.RJ (Rejected)
; UPD ID= 1583, SNARK:<6.1.MONITOR>D36PAR.MAC.116, 5-Mar-85 09:46:42 by PALMIERI
;Add SJMXP maximum number of slots in port indirect table
; UPD ID= 1456, SNARK:<6.1.MONITOR>D36PAR.MAC.115, 1-Feb-85 14:51:42 by GLINDELL
; Add SLPAS - "this SLB belongs to a passive task"
; UPD ID= 1434, SNARK:<6.1.MONITOR>D36PAR.MAC.113, 31-Jan-85 15:04:41 by PALMIERI
;Add "don't range check" flag to PA begstr
; UPD ID= 1371, SNARK:<6.1.MONITOR>D36PAR.MAC.112, 21-Jan-85 12:20:08 by GLINDELL
;Add NF.CWS
; UPD ID= 1358, SNARK:<6.1.MONITOR>D36PAR.MAC.111, 17-Jan-85 16:14:53 by PALMIERI
;Set NMXELN (max # of events on queue) to 10
; UPD ID= 1334, SNARK:<6.1.MONITOR>D36PAR.MAC.110, 15-Jan-85 13:55:22 by GLINDELL
;Remove FIXADJ macro
; UPD ID= 1333, SNARK:<6.1.MONITOR>D36PAR.MAC.109, 15-Jan-85 11:25:34 by GLINDELL
;Remove TSTS6 macro
; UPD ID= 1155, SNARK:<6.1.MONITOR>D36PAR.MAC.108, 5-Dec-84 17:25:31 by GLINDELL
;Add temporary test macro TSTS6
; UPD ID= 1153, SNARK:<6.1.MONITOR>D36PAR.MAC.107, 5-Dec-84 17:12:55 by PALMIERI
;Add SASLT in SA BEGSTR
; UPD ID= 1118, SNARK:<6.1.MONITOR>D36PAR.MAC.106, 20-Nov-84 17:31:13 by GLINDELL
;Add NMDLY, ESDLY and ESDLT for ACK delay.
; UPD ID= 948, SNARK:<6.1.MONITOR>D36PAR.MAC.105, 4-Nov-84 18:10:49 by GLINDELL
;Add MCX (monitor context) bit in the NX begstr
; UPD ID= 938, SNARK:<6.1.MONITOR>D36PAR.MAC.104, 29-Oct-84 11:47:02 by PALMIERI
;Add RCBSX and RCRBS to RC BEGSTR, remove MBVER, MBECO, and MBUEC
; UPD ID= 902, SNARK:<6.1.MONITOR>D36PAR.MAC.103, 19-Oct-84 16:19:33 by PALMIERI
;Add RCDRT field to RC BEGSTR
; UPD ID= 899, SNARK:<6.1.MONITOR>D36PAR.MAC.102, 19-Oct-84 14:40:01 by GLINDELL
;Move definition of BEGSTR NN to LLINKS, and LN to SCLINK
; UPD ID= 885, SNARK:<6.1.MONITOR>D36PAR.MAC.101, 15-Oct-84 16:53:55 by PALMIERI
;Add bit in circuit when set says this router is desiginated router
; UPD ID= 876, SNARK:<6.1.MONITOR>D36PAR.MAC.100, 12-Oct-84 14:09:28 by PALMIERI
;Make line states agree with Network management's warped mind
; UPD ID= 865, SNARK:<6.1.MONITOR>D36PAR.MAC.99, 10-Oct-84 17:58:41 by GLINDELL
;Extended code: include section # in parameter/counter dispatch tables
; UPD ID= 852, SNARK:<6.1.MONITOR>D36PAR.MAC.98, 8-Oct-84 11:15:37 by PALMIERI
;Clean up BEGSTRs DL and RC
; UPD ID= 850, SNARK:<6.1.MONITOR>D36PAR.MAC.97, 5-Oct-84 12:07:58 by GLINDELL
;2 bits is not enough for routing type field any more
; UPD ID= 838, SLICE:<6.1.MONITOR>D36PAR.MAC.93, 28-Sep-84 10:01:28 by PALMIERI
;Remove reference ADJ.NN
; UPD ID= 831, SLICE:<6.1.MONITOR>D36PAR.MAC.92, 26-Sep-84 14:57:32 by NICHOLS
;Change names of SLROB and SLSOB to SLSOB and SLDOB (source & dest obj type)
; UPD ID= 816, SLICE:<6.1.MONITOR>D36PAR.MAC.91, 24-Sep-84 12:11:13 by PALMIERI
;Fix adjacency type values
; UPD ID= 791, SNARK:<6.1.MONITOR>D36PAR.MAC.90, 10-Sep-84 14:36:23 by HALPIN
;Fix Values for Network Management EXECUTOR STATE Parameter, DS.ON and DS.OFF
;
; UPD ID= 783, SNARK:<6.1.MONITOR>D36PAR.MAC.89, 4-Sep-84 13:56:49 by GLINDELL
;Change D36OFF/D36ON to expand to PIOFF/PION
; UPD ID= 773, SNARK:<6.1.MONITOR>D36PAR.MAC.88, 31-Aug-84 13:36:52 by PALMIERI
;Add ability to understand bit mapped counters to COUNTER macro
; UPD ID= 753, SNARK:<6.1.MONITOR>D36PAR.MAC.87, 23-Aug-84 10:13:15 by PALMIERI
;Make RCDSL a halfword
; UPD ID= 724, SNARK:<6.1.MONITOR>D36PAR.MAC.86, 3-Aug-84 14:42:42 by PALMIERI
;Add a mask to get 16 bit node address from adjacency block
; UPD ID= 707, SNARK:<6.1.MONITOR>D36PAR.MAC.85, 25-Jul-84 17:18:26 by GLINDELL
;Add NF.NDP, and change NF.FCS. Add macro RNMXND.
; UPD ID= 701, SNARK:<6.1.MONITOR>D36PAR.MAC.84, 23-Jul-84 09:32:56 by PALMIERI
;Return definitions of KF.SET, KF.CLR, KF.RED until NTMAN is updated
; UPD ID= 700, SNARK:<6.1.MONITOR>D36PAR.MAC.83, 20-Jul-84 15:39:47 by PALMIERI
;Add line in use by circuit bit
; UPD ID= 699, SNARK:<6.1.MONITOR>D36PAR.MAC.82, 20-Jul-84 14:51:48 by PALMIERI
;Add 2 new line states for NMX, remove KI./KF. symbols, add LT pointer to DL
; UPD ID= 688, SNARK:<6.1.MONITOR>D36PAR.MAC.81, 16-Jul-84 16:17:39 by HALPIN
;One more try at fixing PARAMETER Macro...
;
; UPD ID= 684, SNARK:<6.1.MONITOR>D36PAR.MAC.80, 16-Jul-84 10:45:36 by HALPIN
;Fix default values in PARAMETER Macro for the FLAG and DEF fields
;
; UPD ID= 676, SNARK:<6.1.MONITOR>D36PAR.MAC.79, 12-Jul-84 17:37:10 by HALPIN
;Removed all references to the NF.REX function code.
;
; UPD ID= 675, SNARK:<6.1.MONITOR>D36PAR.MAC.78, 12-Jul-84 16:57:19 by PALMIERI
;Add flag RMDRM to resend Router NI hello to endnodes if we are the DR
; UPD ID= 666, SNARK:<6.1.MONITOR>D36PAR.MAC.77, 5-Jul-84 14:04:56 by PALMIERI
;Reorder NTMAN to DLL functions to agree with NTMAN order
; UPD ID= 660, SNARK:<6.1.MONITOR>D36PAR.MAC.75, 2-Jul-84 17:00:29 by PALMIERI
;Move the VISIT count for the message to the public portion RMVST==>MBVST
; UPD ID= 655, SNARK:<6.1.MONITOR>D36PAR.MAC.74, 2-Jul-84 16:51:53 by GLINDELL
;Add SLBYR,SLBYS,SLPKR,SLPKS and remove ELPKR,ELPKS. (For CSSE event)
;Add .NCLCG to be TOPS-10/20 specific event class 96
; UPD ID= 639, SNARK:<6.1.MONITOR>D36PAR.MAC.73, 27-Jun-84 16:30:07 by GLINDELL
;Add RNMXOK macro
; UPD ID= 625, SNARK:<6.1.MONITOR>D36PAR.MAC.72, 14-Jun-84 21:09:13 by PALMIERI
;Move DNADLL data link block to D36PAR
; UPD ID= 618, SNARK:<6.1.MONITOR>D36PAR.MAC.71, 13-Jun-84 09:37:12 by GLINDELL
;Add IBFCM, IBDGL and IBBIP to IB block
;Add ESCWS and ESCDA to ES block
;Add NNPSZ to NN block
; UPD ID= 614, SNARK:<6.1.MONITOR>D36PAR.MAC.70, 11-Jun-84 13:32:21 by GLINDELL
;Add RNMXER macro
; UPD ID= 602, SNARK:<6.1.MONITOR>D36PAR.MAC.69, 6-Jun-84 14:10:59 by GLINDELL
;Add ELCIM and NV.RFR
; UPD ID= 600, SNARK:<6.1.MONITOR>D36PAR.MAC.68, 6-Jun-84 12:23:25 by PALMIERI
;Macro/BEGSTR definitions for new network management interface
; UPD ID= 580, SNARK:<6.1.MONITOR>D36PAR.MAC.67, 31-May-84 15:20:54 by PALMIERI
;Remove AJLRM from adjacency block - no longer needed
; UPD ID= 554, SNARK:<6.1.MONITOR>D36PAR.MAC.66, 24-May-84 10:48:07 by GLINDELL
;Add BUFFER SIZE field to IBBLK
; UPD ID= 546, SNARK:<6.1.MONITOR>D36PAR.MAC.65, 23-May-84 09:49:43 by PALMIERI
;Add another function to DTE dispatch
; UPD ID= 540, SNARK:<6.1.MONITOR>D36PAR.MAC.64, 22-May-84 14:27:46 by HALPIN
;Changed CB begstr to KB
; UPD ID= 532, SNARK:<6.1.MONITOR>D36PAR.MAC.63, 21-May-84 09:09:21 by DMCDANIEL
;Add ADJ.OL (adjacency offline state) for ROUTER
; UPD ID= 531, SNARK:<6.1.MONITOR>D36PAR.MAC.62, 21-May-84 08:53:01 by HALPIN
; UPD ID= 517, SNARK:<6.1.MONITOR>D36PAR.MAC.61, 11-May-84 10:17:00 by GLINDELL
;Add definition of DECnet-36 initialization block IB
; UPD ID= 508, SNARK:<6.1.MONITOR>D36PAR.MAC.60, 7-May-84 16:05:17 by HALPIN
;Moved VN BEGSTR from NTMAN into D36PAR
;Put NF.MAX symbol in, so the NF Functions coded can be ranged checked
;
; UPD ID= 504, SNARK:<6.1.MONITOR>D36PAR.MAC.59, 7-May-84 12:18:34 by PALMIERI
;Add new circuit state value RCS.FA (Failed)
; UPD ID= 487, SNARK:<6.1.MONITOR>D36PAR.MAC.58, 30-Apr-84 13:56:00 by PALMIERI
;Add PH4 flag in adjacency block
; UPD ID= 468, SNARK:<6.1.MONITOR>D36PAR.MAC.57, 27-Apr-84 14:17:29 by GROSSMAN
;(Re)move definitions for NISRV. Definitions are now in NIPAR.
; UPD ID= 455, SNARK:<6.1.MONITOR>D36PAR.MAC.56, 25-Apr-84 11:39:53 by PALMIERI
;Add DTESRV functions and add AJNAL to adjacency block
; UPD ID= 443, SNARK:<6.1.MONITOR>D36PAR.MAC.55, 19-Apr-84 14:11:21 by GLINDELL
;Define SYSPIF/SYSPIN to be PIOFF/PION on the 20
;Insert definitions of PA,CT BEGSTRs and PARAMETER,COUNTER macros
; UPD ID= 440, SNARK:<6.1.MONITOR>D36PAR.MAC.54, 17-Apr-84 11:29:18 by GLINDELL
;Back out CB and PB definitions because of multiple definition (SCPAR)
; UPD ID= 431, SNARK:<6.1.MONITOR>D36PAR.MAC.53, 5-Apr-84 17:28:10 by GLINDELL
;Update DECnet/CI port connect states with new substates of CONNECT
; UPD ID= 430, SNARK:<6.1.MONITOR>D36PAR.MAC.52, 5-Apr-84 16:54:46 by GLINDELL
;Move DECnet/CI port connect states here
; UPD ID= 427, SNARK:<6.1.MONITOR>D36PAR.MAC.51, 4-Apr-84 17:21:15 by NICHOLS
;Add FIXADJ macro to compensate for bug in negative ADJBP
; UPD ID= 424, SNARK:<6.1.MONITOR>D36PAR.MAC.50, 3-Apr-84 17:11:41 by GLINDELL
;Add DECnet/CI CB,PB and error definitions
; UPD ID= 415, SNARK:<6.1.MONITOR>D36PAR.MAC.49, 2-Apr-84 17:14:45 by PALMIERI
;Add new DNADLL function codes
; UPD ID= 414, SNARK:<6.1.MONITOR>D36PAR.MAC.48, 2-Apr-84 11:24:49 by HALPIN
;Put NF BEGSTR definitions in here from NTMAN
; UPD ID= 410, SNARK:<6.1.MONITOR>D36PAR.MAC.46, 30-Mar-84 13:45:35 by PALMIERI
;Put FTRTST under FTOPS10
; UPD ID= 400, SNARK:<6.1.MONITOR>D36PAR.MAC.45, 21-Mar-84 13:46:51 by MCINTEE
;Debug flag definitions have moved to PROLOG for TOPS20
; UPD ID= 378, SNARK:<6.1.MONITOR>D36PAR.MAC.44, 11-Mar-84 16:18:36 by GROSSMAN
; Move definitions of CAX, ADDX and friends to MACSYM
; UPD ID= 347, SNARK:<6.1.MONITOR>D36PAR.MAC.43, 24-Feb-84 13:51:44 by PALMIERI
;Update for use with new Router with ethernet support
; UPD ID= 302, SNARK:<6.1.MONITOR>D36PAR.MAC.42, 23-Jan-84 13:41:49 by GLINDELL
;New macros for code and data generation in addition to standard TOPS-20 ones
;Set NMXELN (max # of events on queue) to 6
; UPD ID= 296, SNARK:<6.1.MONITOR>D36PAR.MAC.41, 20-Jan-84 15:49:50 by GLINDELL
;New event logger symbols, BEGSTRs EC, NE, FA and ET (latter for test only)
; UPD ID= 288, SNARK:<6.1.MONITOR>D36PAR.MAC.40, 11-Jan-84 10:08:47 by GUNN
;Change use of NOSKD1 and OKSKD1 to NOSKED and OKSKED, the former pair are
; now obsolete.
; UPD ID= 284, SNARK:<6.1.MONITOR>D36PAR.MAC.39, 3-Jan-84 10:48:42 by NICHOLS
;Fix ordering of CHNOFF and NOSKED in D36OFF and D36ON
; UPD ID= 284, SNARK:<6.1.MONITOR>D36PAR.MAC.39, 3-Jan-84 10:48:42 by NICHOLS
;Fix ordering of CHNOFF and NOSKED in D36OFF and D36ON
; UPD ID= 273, SNARK:<6.1.MONITOR>D36PAR.MAC.38, 7-Dec-83 16:22:52 by GLINDELL
;Inserted FTPARANOID definitions to give more info on "ORC" problem
; UPD ID= 253, SNARK:<6.1.MONITOR>D36PAR.MAC.37, 17-Nov-83 10:32:51 by PALMIERI
;Updates for Phase IV router - BEGSTR AJ and RC
; UPD ID= 249, SNARK:<6.1.MONITOR>D36PAR.MAC.36, 16-Nov-83 15:20:08 by MCINTEE
;Add definition of SAUID, SLUID
; UPD ID= 241, SNARK:<6.1.MONITOR>D36PAR.MAC.35, 8-Nov-83 08:40:04 by MCINTEE
;MERGE FROM -10 Remove FTPH4 conditionals from MBDS1, MDSR1, RMOAP, RMIAP
;DNET:D36PAR.MAC[10,36,MON,NEW], 05-Oct-1983 05:23:09, Edit by TARL
;MCO 10994 - Put MBDS1 and MBSR1 under FTPH4 conditional
;DNET:D36PAR.MAC[10,36,MON,NEW], 27-Sep-1983 18:58:22, Edit by TARL
;MCO 10988 - Add NTMAN interface to KONDSP via KF.xxx functions
;DNET:D36PAR.MAC[10,36,MON,NEW], 22-Sep-1983 21:30:44, Edit by TARL
;MCO 10971 - Grand Re-merge of the -10/-20 sources
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1984, 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
UNIVERSAL D36PAR - Parameters for DECnet-36
SUBTTL V. Brownell & W. Nichols/Tarl
;D36PAR is the universal parameter file for DECnet-36.
SALL
Subttl Table of Contents
; Table of Contents for D36PAR
;
; Section Page
;
;
; 1. Historical notes . . . . . . . . . . . . . . . . . . . 4
; 2. Feature Tests . . . . . . . . . . . . . . . . . . . . 5
; 3. MISC CONSTANTS . . . . . . . . . . . . . . . . . . . . 8
; 4. Definitions
; 4.1 Operating System Dependent . . . . . . . . . . 11
; 5. Macro Definitions
; 5.1 Queue Management Macros . . . . . . . . . . . 13
; 5.2 ASSUME - verify symbol values . . . . . . . . 15
; 5.3 D36SYM - MACSYM fixups . . . . . . . . . . . . 16
; 5.4 Network management
; 5.4.1 Error macro . . . . . . . . . . . . . . 17
; 5.4.2 Parameters . . . . . . . . . . . . . . . 18
; 5.4.3 Counters . . . . . . . . . . . . . . . . 19
; 6. Structure Definitions
; 6.1 Queue Header . . . . . . . . . . . . . . . . . 20
; 6.2 DECnet-36 Initialization Block . . . . . . . . 21
; 6.3 DECnet-36 Message Descriptor . . . . . . . . . 22
; 6.4 DECnet-36 Message Block . . . . . . . . . . . 23
; 6.5 Session Control Link Block . . . . . . . . . . 27
; 6.6 Session Control Job Block . . . . . . . . . . 28
; 6.7 NSP Sublink Block . . . . . . . . . . . . . . 29
; 6.8 NSP LINK Block . . . . . . . . . . . . . . . . 30
; 6.9 Router Adjacency Block . . . . . . . . . . . . 31
; 6.10 Router Circuit Block . . . . . . . . . . . . . 32
; 6.11 DNADLL data link block . . . . . . . . . . . . 34
; 7. Value Definitions
; 7.1 NSP Port States . . . . . . . . . . . . . . . 37
; 7.2 DECnet Standard Parameters . . . . . . . . . . 38
; 7.3 DECnet-wide states . . . . . . . . . . . . . . 39
; 8. Inter-Layer Parameters
; 8.1 Overall Argument Conventions . . . . . . . . . 40
; 8.2 Session Control Function Codes . . . . . . . . 41
; 8.3 NSP Function Codes . . . . . . . . . . . . . . 42
; 8.4 Session Control/NSP . . . . . . . . . . . . . 43
; 8.5 NSP/Router . . . . . . . . . . . . . . . . . . 45
; 8.6 Router/DLL . . . . . . . . . . . . . . . . . . 46
; 8.7 Layer/NMX (Event logger) . . . . . . . . . . . 47
; 9. Network Management
; 9.1 Argument blocks . . . . . . . . . . . . . . . 48
; 9.2 NSP and ROUTING VERSION Number Formats . . . . 50
; 9.3 Values used by NMX . . . . . . . . . . . . . . 51
; 9.4 NMX Function Block Definition . . . . . . . . 53
; 9.5 Event Parameters and Argument blocks . . . . . 54
; 10. Test Bed Stuff . . . . . . . . . . . . . . . . . . . . 55
; 11. FIXADJ Macro - Compensate for bug in negative ADJBP . 56
; 12. End of D36PAR . . . . . . . . . . . . . . . . . . . . 58
SUBTTL Historical notes
COMMENT |
The DECnet modules were originally written and tested on a
user-mode test-bed on TOPS10. The modules at that time were
named according to current architecture names, and TOPS10
naming conventions. After getting the DECnet code running in
the TOPS10 monitor, the DECnet modules were integrated into
TOPS20 (for Release 6.1). The naming conventions used earlier
were no longer valid because the architecture group renamed
several of the DECnet layers. To resolve these problems, the
DECnet modules were renamed to names which avoided the names
the architecture group didn't want us using any more. The
result of all this is that several modules have comments and
labels which do not correspond with the current module name,
so we supply a mapping table between old names and new names
to attempt to relieve the confusion:
Old name(layer) New name New layer name
D36UNV(Universal) D36PAR (Universal file)
D36COM(Common subrs) D36COM (Common subroutines)
NSPSER(Network service) LLINKS End Communication Layer
XPTSER(Transport) ROUTER Routing Layer
SCTPRM(Session Control) SCPAR Session control parameters
SCTCON(Session Control) SCLINK Session Control Layer
SCTUUO(Session Control) SCMUUO Session control uuos
NMXCON(Network Mngmnt.) NTMAN Network Management Layer
In addition, on the -20, we needed an entirely new module for
the UUO/JSYS level code which was entirely different between
the -10 and the -20. This module was given the name SCJSYS,
and is morally equivalent to SCMUUO.
| ;End of Comment
SUBTTL Feature Tests
;Here are the feature tests for DECnet-36.
FTOPS10==:0 ;ASSEMBLE FOR TOPS10
FTOPS20==:1 ;ASSEMBLE FOR TOPS20
FTPH4==:0 ;ASSEMBLE PHASE IV CODE
IFN FTOPS10,<
FTTRACE==:0 ;NON-ZERO TO ENABLE TRACES
FTMINTRACE==:0 ;MINI TRACE (SUBSET OF ABOVE)
FTDEBUG==:1 ;ASSEMBLE WITH DEBUGGING STUFF
FTPARANOID==:1 ;DO EXTRA CAREFUL CHECKING
FTCORBUG==:0 ;FTPARANOID FOR CORE MANGLER. [EXPENSIVE!]
FTLSTCOR==:1 ;NOTE - TO TURN ON FTLSTCOR, SET TO POSITIVE 1.
; LSTCOR TRIES TO TRACE LOST CORE
XP FTRTST,0 ; Default is no ROUTER looper
>;END IFN FTOPS10
SEARCH MACSYM
IFN FTOPS10,<
;We search NETPRM here to check that parallel definitions are
;properly defined
SEARCH F,S,NETPRM
.CPYRT<
COPYRIGHT (C) 1981,1984 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
>,.
D36SYM
XP FTP4R,0 ;Enables phase IV code. This will **NOT** work without
;a phase IV router (which is not supplied with 7.02),
;and will merely cause bizarre conditions if it runs.
>;End of IFN FTOPS10
IFN FTOPS20,<
IFN FTOPS10,<IF2, <PRINTX ?Operating system feature tests screwed up>>
SEARCH PROLOG,MONSYM
FTMP==:0 ;MULTI-PROCESSOR OFF IN TOPS-20
FTKLP==:1 ;KL PAGING
FTKS10==:SMFLG ;KS FLAG
FTKL10==:KLFLG ;KL FLAG
FTNRT==:0 ;NO NRT ON TOPS20
>;End of IFN FTOPS20
IFN FTP4R,FTPHA2==:0 ;IF NI DLL, DON'T DO PHASE II NODES
IFE FTP4R,FTPHA2==:1 ;ELSE MIGHT AS WELL
;These are the DECnet-36 TOPS-20 AC definitions.
IFN FTOPS20,<
DEFINE XP(SYM,VAL),<SYM==:VAL> ;DEFINE SYMBOL GLOBAL SUPRESSED TO DDT
DEFINE XPP(SYM,VAL),<SYM=:VAL> ;DEFINE SYMBOL GLOBAL NOT SUPRESSED
FREE0==0 ;FREE FOR REDEFINITION
; FREE0 ONLY APPLIES TO AC 0
XPP T1,1 ;TEMPORARIES
XPP T2,2 ; ..
XPP T3,3 ; ..
XPP T4,4 ; ..
T5==5 ;T5 AND T6 USED MAINLY
T6==6 ; FOR EXTENDED INSTRUCTIONS
MB==7 ;MESSAGE BLOCK POINTER
P1==10 ;PRESERVED ACS
P2==11 ; ..
MS==12 ;POINTER TO CURRENT MSD FOR DNxyBY
;ALSO SEE D36SYM CONCERNING THESE REDEFS
FREE1==13 ;FIRST FREE
FREE2==14 ;FREE1,2,ETC CAN BE ANY NON-ZERO AC
FREE3==15 ; THAT IS NOT OTHERWISE DEFINED HERE
XPP CX,16 ;SCRATCH AC
XPP P,17 ;THE STACK POINTER
>
OPDEF TRASH [HRROI 474747] ;SIMPLE PROCEDURE TO LEAVE JUNK IN AN AC
IFN FTOPS20,<
DEFINE TESTS1,<TSTMS0>
> ;END IFN FTOPS20
IFN FTOPS10,<
DEFINE TESTS1,<
IFN FTDEBUG,<
IFN FTKLP,<
XMOVEI CX,0
SKIPN CX
CALL TESTSB ;;COMMON BUG. FOR ALL SECTION 1 ASSERTION FAILS
>;;END IFN FTKLP
>;;END IFN FTDEBUG ;;IN D36COM
>;END DEFINE TESTS1
>;END IFN FTOPS10
IFN FTOPS10,<
OPDEF CALLRET [JRST] ; to be defined with CALL and RET
.NODDT CALLRET
;HARDWARE INTERLOCK DEFINITIONS
OPDEF D36OFF [JSP CX,D36PIF##]
OPDEF D36ON [JSP CX,D36PIN##]
;MACROS TO CHANGE SECTION (WILL CALL COROUTINES, TO ENSURE RETURNING TO
; PROPER SECTION WHEN CURRENT ROUTINE POPJ'S)
;
DEFINE SEC0,<
IFN FTKLP,<PUSHJ P,SSEC0##>
>
DEFINE SEC1,<
SE1ENT
>
DEFINE S0CALL(ROUTINE),<
IFN FTKLP,<
CALL [ SEC0 ;;ROUTINE WANTS TO BE IN SECTION 0
CALLRET ROUTINE] ;;ROUTINE IN SEC 0, HE WILL POPJ TO SEC N
>; END IFN FTKLP
IFE FTKLP,<CALL ROUTINE> ;;JUST CALL IT (NO SECTION PROBLEMS)
>; END DEFINE S0CALL
SUBTTL MISC CONSTANTS
;MISC CONSTANTS
.INFIN==:377777,,777777 ;PLUS INFINITY
.MINFI==:1B0 ;MINUS INFINITY
.LHALF==:777777B17 ;LEFT HALF
.RHALF==:777777 ;RIGHT HALF
.FWORD==:-1 ;FULL WORD
>;END OF IFN FTOPS10
IFN FTOPS20,<
DEFINE D36OFF <PIOFF>
DEFINE D36ON <PION>
Repeat 0,< ;Old defs
DEFINE D36OFF <
CONSO PI,77000 ;;CHECK TO SEE IF AT PI LEVEL
NOSKED ;;NO, KEEP SCHEDULER OUT TOO
CHNOFF DLSCHN
>
DEFINE D36ON <
CHNON DLSCHN
CONSO PI,77000 ;;CHECK TO SEE IF AT PI LEVEL
OKSKED ;;NO, MATCH D36OFF'S NOSKED
>
>
DEFINE SYSPIF < ;System PIOFF
PIOFF
>
DEFINE SYSPIN < ;System PION
PION
>
DEFINE SEC0 <S0.ENT>
DEFINE SEC1 <EA.ENT>
>;END IFN FTOPS20
;Define a mask to strip off area and node from the Phase IV message
XP RN%ARE,MASK.(^D6,^D25) ;MASK TO GET AREA
XP RN%NOD,MASK.(^D10,^D35) ;MASK TO GET NODE
IFN FTOPS10,<
;The following definition of USRSAV is the default. Redefine it if
;you want. The calls to SPCSAV have two arguments: the routine name
;and a list of ACs saved by that routine. The IFDEFs are not needed
;if you are sure the ACs will be defined.
DEFINE USRSAV,<
IFDEF .FPAC,<
SPCSAV(.SAV1,.FPAC)
SPCSAV(.SAV2,<.FPAC,.FPAC+1>)
SPCSAV(.SAV3,<.FPAC,.FPAC+1,.FPAC+2>)
SPCSAV(.SAV4,<.FPAC,.FPAC+1,.FPAC+2,.FPAC+3>)
>
>
EXT <.SAV1,.SAV2,.SAV3,.SAV4>
;THE FOLLOWING MACRO MAY BE USED TO SUPPRESS CREF ENTRIES FOR
;ALL THE JUNK SYMBOLS USED INTERNALLY WITHIN MACROS IN MACSYM
DEFINE .XCMSY <
.XCREF
.XCRF1 <..ACT,..CSC,..CSN,..IFT,..JX1,..MSK,..MX1,..MX2>
.XCRF1 <..NAC,..NRGS,..NS,..NV,..PST,..STKN,..STKQ,..STKR>
.XCRF1 <..TRR,..TSA1,..TX1,..TX2,..TXAC,.FP,.FPAC,.NAC,.SAC,.SAV1>
.XCRF1 <.SAV2,.SAV3,POINTR,POS,..LDE,..FLG,WID,..CAS1,..CNS,..CNS2>
.XCRF1 <..DPB,..GNCS,..ICNS,..JE,..JN,..LDB,..STR0,..STR1,..STR2>
.XCRF1 <..STR4,..TMO,..TMZ,..TSAC,..TSIZ,..TX,..TY,.ACV1,.ACV2>
.XCRF1 <..TX1,..TX2,..TXAC,..TX3,..TYNE,..TYNN>
.XCRF1 <.ACV3,.CASE,.DECR0,.IF0,.INCR0,.OPST1,.OPST2,.STKV1>
.XCRF1 <.STKV2,.STKV3,.TRV1,.TRV2,.TRV3>
.XCRF1 <..OLD,...OLD,..BITS,..OFF,..LOC,.LDBE,..LDBE>
.XCRF1 <..RELO>
.CREF
>
DEFINE .XCRF1 (SYMS)<
IRP SYMS,<
IFDEF SYMS,< .XCREF SYMS>>>
>;END OF IFN FTOPS10
SUBTTL Definitions -- Operating System Dependent
;The following are some definitions that must be redefined depending upon
;the operating system being used.
;These are the TOPS-20 specific definitions
IFN FTOPS20,<
; $RELOC is kept for compatibility only
DEFINE $RELOC <
IF1,<PRINTX %Warning: $RELOC is being phased out>
>
DEFINE $HIGH <
IF1,<PRINTX %Warning: $HIGH is being phased out>
RESCD
>
DEFINE $LOW <
IF1,<PRINTX %Warning: $LOW is being phased out>
RESDT
>
;For code generation, one of the TOPS-20 macros RESCD, RESCD(INIT),
; RESCD(SEC0) or SWAPCD should be used.
;For data declarations, one of the following macros should be used
;
; RESDT Move to initialized data psect
; RESVR Move to zeroed data psect
; SWAPVR Move to swappable zeroed data psect
;Resident or non-resident variables in extended sections must be
; defined in STG; the macros live only within STG
DEFINE RESVR <
.ENDPS
.PSECT RSVAR
>
DEFINE SWAPVR <
.ENDPS
.PSECT NRVAR
>
>
IFN FTOPS10,<
;The TOPS-20 code and data generation macros are turned into $HIGH or $LOW
; on the 10.
DEFINE RESCD <$HIGH>
DEFINE SWAPCD <$HIGH>
DEFINE RESDT <$LOW>
DEFINE RESVR <$LOW>
DEFINE SWAPVR <$LOW>
;THE FOLLOWING OPCODES ARE USED TO REFERENCE DATA IN THE 'PREVIOUS
;CONTEXT'. THE PREVIOUS CONTEXT IS THE USER ADDRESS SPACE IF
;THE JSYS CALL WAS EXECUTED BY A USER PROGRAM, OR THE
;MONITOR ADDRESS SPACE IF IT WAS EXECUTED BY THE MONITOR.
;WHEN WRITING JSYS CODE HOWEVER, IT IS CONVENIENT TO THINK OF THE
;CURRENT CONTEXT AS 'MONITOR' AND THE PREVIOUS CONTEXT AS
;'USER'. THESE TERMS SHOULD BE UNDERSTOOD IN THIS WAY IN THE
;FOLLOWING DISCUSSION AND IN THE OPDEF'S.
;XCTU IS THE GENERAL CASE AND IS USED FOR ALL ORDINARY (ONE-ADDRESS)
;INSTRUCTIONS. IF USED FOR BLT, IT WILL CAUSE BOTH SOURCE AND
;DESTINATION TO BE USER.
;XCTUU ARE USED TO BOTH COMPUTE EFFECTIVE ADDRS IN USER AND FETCH
;FROM USER, I.E. - XCTUU [MOVE T1,@T1]
;XBLTMU AND XBLTUM ARE USED WITH BLT TO DO MONITOR-TO-USER
;AND USER-TO-MONITOR BLT'S RESPECTIVELY. XBLTUU IS ALSO DEFINED
;FOR CONSISTENCY FOR USER-TO-USER BLT.
;XCTBU IS USED WITH BYTE INSTRUCTIONS WHERE POINTER IS IN MONITOR,
;DATA IN USER. XCTBUU IS BYTE INSTRUCTION WITH POINTER AND DATA
;IN USER (KI10 DOES NOT SUPPORT).
;XPSHUM AND XPOPMU ARE THE ONLY CASES OF PUSH AND POP CURRENTLY USED.
;XPSHUM MEANS PUSH USER-TO-MONITOR, XPOPMU MEANS POP MONITOR-TO-USER, ETC.
;ADDITIONAL SUCH MNEMONICS WILL BE DEFINED IF NEEDED.
OPDEF XCTU [XCT 4,0] ;DATA ONLY IS IN PREVIOUS CONTEXT
OPDEF XCTUU [XCT 14,0] ;"E" AND DATA FROM PREV. CONTEXT (INCLUDES AC LOOK-UP)
OPDEF XBLTMU [XCT 4,0] ;DATA FROM PREVIOUS CONTEXT
OPDEF XBLTUM [XCT 1,0] ;DATA TO PREVIOUS CONTEXT
OPDEF XBLTUU [XCT 5,0] ;DATA FROM AND TO PREVIOUS CONTEXT
OPDEF XCTBU [XCT 3,0] ;EXTENDED BLT - DATA FROM PREVIOUS CONTEXT
OPDEF XCTBMU [XCT 1,0] ;BLT - DATA TO PREVIOUS CONTEXT
OPDEF XCTBUU [XCT 7,0] ;POINTER,POINTER E AND DATA FROM PREVIOUS CONTEXT
OPDEF XPSHUM [XCT 4,0] ;STACK IN PREVIOUS CONTEXT
OPDEF XPOPMU [XCT 4,0] ;STACK IN PREVIOUS CONTEXT
.NODDT XCTU,XCTUU,XBLTMU,XBLTUM,XBLTUU,XCTBU,XCTBMU,XCTBUU,XPSHUM,XPOPMU
>;END IFN FTOPS10
SUBTTL Macro Definitions -- Queue Management Macros
;These macros depend on the data structures QH and QP in NSPUNV.
;Put the block pointed to by BLKPTR at the end of HEADER's queue
;The arguments: blkptr: ac that points to block to be queued
; header: pointer to QH data structure
; offset: offset into block of forward pointer for this q
; ac: a temp ac other than CX, don't count on value
DEFINE ENDQUE(blkptr,header,offset,tempac),<
OPSTR <SKIPN tempac,>,QHEND,+header
STOR blkptr,QHBEG,+header
SKIPE tempac
STOR blkptr,QPNXT,+offset(tempac)
STOR blkptr,QHEND,+header
SETZRO QPNXT,+offset(blkptr)
INCRQH(header,tempac)
>;END OF DEFINE ENDQUE
;INCRQH is used in LLINKS by the QSRTMB routine as well as by ENDQUE
DEFINE INCRQH(header,tempac),<
IF1,<IFN <QHCNT!QHMAX>+1 + <QHMAX!777777>+1 + QH.CNT - QH.MAX,<
PRINTX ?BEGSTR QH is defined wrong for INCRQH(header)
>>
AOS tempac,QH.CNT+header ;;ONE MORE ENTRY ON Q
HLRZ CX,tempac ;;ISOLATE OLD MAX
CAIGE CX,(tempac) ;;GOT A NEW MAX?
HRLM tempac,QH.MAX+header ;;YES, STORE IT
>;END OF DEFINE INCRQH
;DECRQH is separated for symmetry with INCRQH
DEFINE DECRQH(header),<
DECR QHCNT,+header
>;END OF DEFINE DECRQH
;These macros depend on the data structures QH and QP in NSPUNV.
;Take the first element off a queue and put pointer in designated AC
;The arguments: ac: Return pointer to dequeued block here
; header: pointer to QH data structure
; offset: offset into block of forward pointer for this q
; empty: JRST EMPTY if queue is empty
; %label: default this one, of course
DEFINE DEQUE(ac,header,offset,empty),<
OPSTR <SKIPN ac,>,QHBEG,+header
JRST empty
OPSTR <SKIPN CX,>,QPNXT,+offset(ac)
STOR CX,QHEND,+header
STOR CX,QHBEG,+header
DECRQH header
>
;Remove the block pointed to by BLKPTR from HEADER's queue
;The arguments: blkptr: ac that points to block to be queued
; header: pointer to QH data structure
; offset: offset into block of forward pointer for this q
; ac: a temp ac other than CX, don't count on value
DEFINE RMVQUE(blkptr,header,offset,tempac,%lab1,%lab2,%lab3),<
;;POINT TO HEAD-OF-QUEUE PTR
IFN QPNXT+1,<PRINTX QPNXT muxt be a full word for RMVQUE>
IFN QHBEG+1,<PRINTX QHBEG muxt be a full word for RMVQUE>
IFN QHEND+1,<PRINTX QHEND muxt be a full word for RMVQUE>
XMOVEI tempac,QH.BEG-QP.NXT-offset+header
%lab1:!
OPSTR <CAMN blkptr,>,QPNXT,+offset(tempac)
JRST %lab2 ;;FOUND IT, NOW REMOVE IT
LOAD tempac,QPNXT,+offset(tempac) ;;GET NEXT POINTER
JUMPE tempac,%lab3 ;;NO MORE, CAN'T REMOVE IF NOT THERE
JRST %lab1 ;;NOW TRY THIS ONE
%lab2:!
SKIPN CX,QP.NXT+offset(blkptr) ;;GET NEXT POINTER
STOR tempac,QHEND,+header ;;IF ITS ZERO, UPDATE END PTR
STOR CX,QPNXT,+offset(tempac) ;;STORE IT IN PREVIOUS BLOCK
SKIPN tempac,QH.BEG+header ;;IF LIST IS NOW EMPTY
STOR tempac,QHEND,+header ;; THEN ZERO END PTR TOO FOR ENDQUE
DECRQH header ;;DECREMENT THE Q COUNTER
%lab3:!
>;END OF RMVQUE MACRO
SUBTTL Macro Definitions -- ASSUME - verify symbol values
;Assume macro verifies a relation between two values
DEFINE ASSUME(A,B,C) <
IFIDN <B><EQ>,<IFN <A> - <C>,<IF1 <PRINTX ?ASSUME failed: 'A 'B 'C>>>
IFIDN <B><NE>,<IFE <A> - <C>,<IF1 <PRINTX ?ASSUME failed: 'A 'B 'C>>>
IFIDN <B><GT>,<IFLE <A> - <C>,<IF1 <PRINTX ?ASSUME failed: 'A 'B 'C>>>
IFIDN <B><LT>,<IFGE <A> - <C>,<IF1 <PRINTX ?ASSUME failed: 'A 'B 'C>>>
>
SUBTTL Macro Definitions -- D36SYM - MACSYM fixups
;D36SYM should be called by DECnet-36 modules which call TOPS-20's
;MACSYM universal after SEARCHing MACSYM and D36PAR. It redefines
;those variables, macros and OPDEFs from MACSYM which do not fit into
;the DECnet-36 environment as defined in MACSYM.
IFE FTOPS10,<DEFINE D36SYM,<PURGE P3,P4>>
SUBTTL Macro Definitions -- Network management -- Error macro
;Define error macro that works like RETBAD, except that it understands
; negative error codes
DEFINE RNMXER (ERN,EXTRA)<
IFNB <ERN'EXTRA>,<
JRST [ EXTRA
IFNB <ERN>,<MOVX T1,ERN>
RET]>
IFB <ERN'EXTRA>,<
RET>>
SUBTTL Macro Definitions -- Network management -- No data macro
;Define macro that returns a 'no data present' code
DEFINE RNMXND <
JRST [ MOVX T1,NF.NDP
RET]
>
SUBTTL Macro Definitions -- Network management -- Success macro
;Define success macro that does a return with success code loaded into T1
DEFINE RNMXOK <
JRST [ MOVX T1,NF.FCS
RET]
>
SUBTTL Macro Definitions -- Network management -- Parameters
;The PA structure is used to keep the information for a DECnet network
;management parameter. It is pointed to by a table, generated with the
;PARAMETER macro. This structure is read by the routine NTPARM in D36COM.
BEGSTR PA
FIELD FLA,5 ;[7318]Flag field
BIT NST ;[7318]Cannot set this parameter
BIT NCL ;[7318]Cannot clear this parameter
BIT NRD ;[7318]Cannot read this parameter (Write only memory)
BIT BEX ;[7318]Buffer from NTMAN expected
BIT DRC ;[7318]Don't range check "set" value
FILLER 13 ;[7318]
HWORD PNR ;[7318]Parameter #
WORD DEF ;[7318]Default value for parameter
WORD MAX ;[7318]Maximum value that can be set
WORD MIN ;[7318]Minimum value that be set
WORD SET ;Instruction to execute to set the parameter
WORD RED ;Instruction to execute to read the parameter
WORD CLR ;Instruction to execute to clear the parameter
ENDSTR
;The PARAMETER macro generates one entry in the parameter table
;Make sure that the assumtions are valid
ASSUME PAPNR,EQ,<0,,-1> ;[7318]
ASSUME PA.PNR,EQ,0 ;[7318]
ASSUME PA.NST,EQ,0 ;[7318]
ASSUME PA.NCL,EQ,0 ;[7318]
ASSUME PA.NRD,EQ,0 ;[7318]
ASSUME PADEF,EQ,-1 ;[7318]
ASSUME PA.DEF,EQ,1 ;[7318]
ASSUME PA.MAX,EQ,2 ;[7318]
ASSUME PA.MIN,EQ,3 ;[7318]
ASSUME PA.SET,EQ,4 ;[7318]
ASSUME PA.RED,EQ,5 ;[7318]
ASSUME PA.CLR,EQ,6 ;[7318]
;Define PARAMETER macro
DEFINE PARAMETER (NR,XFLAG,XMAX,XMIN,XDEF,XSET,XREAD,XCLEAR,COMNT) <
IFB <XFLAG>,<FLAG==0>
IFNB <XFLAG>,<FLAG==XFLAG>
IFB <XMAX>,<MAX==^D65535>
IFNB <XMAX>,<MAX==XMAX>
IFB <XMIN>,<MIN==0>
IFNB <XMIN>,<MIN==XMIN>
IFB <XDEF>,<DEF==0,,-1>
IFNB <XDEF>,<DEF==XDEF>
IFE <<CURPSX-PXRESCD>*<CURPSX-PXSWAPCD>>,<
XCDSEC,,[FLAG!NR> ;[7318]
IFN <<CURPSX-PXRESCD>*<CURPSX-PXSWAPCD>>,<
MSEC1,,[FLAG!NR> ;[7318]
DEF ;[7318]
MAX ;[7318]
MIN ;[7318]
IFNB <XSET>, <XSET>
IFB <XSET>, <TRN>
IFNB <XREAD>, <XREAD>
IFB <XREAD>, <TRN>
IFNB <XCLEAR>,<XCLEAR>
IFB <XCLEAR>, <TRN> ]
>
SUBTTL Macro Definitions -- Network management -- Counters
;The CT structure is used to keep the information for a DECnet network
;management counter. It is pointed to by a table, generated with the
;COUNTER macro. This structure is read by the routine NTCTRS in D36COM.
BEGSTR CT
FIELD BMF,1 ;Bit map flag
FIELD HDR,35 ;Counter width, number
WORD RED ;Instruction to execute to read the counter
WORD CLR ;Instruction to execute to clear the counter
WORD BMC ;Instruction to execute to get the bit map
ENDSTR
;The COUNTER macro generates one entry in the counter table
;First make sure that the COUNTER macros assumptions are valid
ASSUME CTRED,EQ,-1
ASSUME CT.RED,EQ,1
ASSUME CTCLR,EQ,-1
ASSUME CT.CLR,EQ,2
;Now define COUNTER macro
DEFINE COUNTER(NR,WIDTH,ACCESS,CLEAR,BMACC,COMMENT) <
IFNB <BMACC>,<FLAG==<CTBMF_-^D18>>
IFB <BMACC>,<FLAG==0>
IFE <<CURPSX-PXRESCD>*<CURPSX-PXSWAPCD>>,<
XCDSEC,,[XWD FLAG!WIDTH,NR>
IFN <<CURPSX-PXRESCD>*<CURPSX-PXSWAPCD>>,<
MSEC1,,[XWD FLAG!WIDTH,NR>
ACCESS
IFNB <CLEAR>, <CLEAR>
IFB <CLEAR>, <TRN>
IFNB <BMACC>, <BMACC> ]
>
SUBTTL Structure Definitions -- Queue Header
;See macros ENDQUE, DEQUE and RMVQUE for examples of QH uses.
;LLINKS also uses these definitions in its QSRTMB routine
;When a queue is emptied, DEQUE assures that the QHBEG pointer, the
;QHEND pointer and the QHCNT count will be zero.
BEGSTR QH
WORD BEG ;THESE MAY BE MADE LESS THAN FULL WORDS
WORD END ; IF NEED BE AND FULL-WORD ADDRESSING
; IS NOT REQUIRED.
HWORD MAX ;MAX LENGTH QUEUE EVER GOT
HWORD CNT ;CURRENT LENGTH OF QUEUE
ENDSTR
;Structure QP, queue pointer, is included to emphasize the fact that
;ENDQUE and DEQUE expect the forward pointer in a block to be a full
;word, and to simplify the addition of backward pointers should that
;become desirable.
;Note that the message block does not use QP, since it is in the
;universal file, not in LLINKS. There is a comment in the definition
;of the message block pointing out that the forward pointer must be a
;full word for LLINKS.
BEGSTR QP
WORD NXT ;POINTER TO NEXT BLOCK ON QUEUE
ENDSTR
;Byte pointer and count structure. Routines DNGUBY, DNPUBY, and
;all related DNGUnB require a pointer to this type of structure.
;All byte pointers are section local (for the moment)
BEGSTR BP
WORD BPT ;BYTE POINTER TO USER STRING
WORD BYT ;BYTE COUNT LEFT
ENDSTR
;DNGUBY will return an error of NEPAM% if the count BPPYT runs out,
;DNPUBY will return an error of NEPVL% if the count runs out,
;and both will return NEADC% if they get an addressing error of
;any kind.
SUBTTL Structure Definitions -- DECnet-36 Initialization Block
;The initialization block is the argument to all DECnet-36 initialization
; routines. It is set with NODE% jsys functions, and read by the various
; DECnet layers during and after initialization.
BEGSTR IB
FIELD PH2,1 ;Set if Phase II desired
FILLER 1
FIELD RTR,4 ;Routing type: one of
; RNT.L1 Level-1 router
; RNT.NR Endnode
FIELD FCM,2 ;Default flow control
WORD NAM ;Executor node name (in sixbit)
WORD ADR ;Executor node address (16-bit address)
WORD MXA ;Maximum address
WORD MXB ;Maximum buffers
WORD DGL ;Default goal
WORD DBL ;Default # of buffers per link
WORD BIP ;Buffer input percentage
WORD BSZ ;Buffer size
ENDSTR
SUBTTL Structure Definitions -- DECnet-36 Message Descriptor
;This is the DECnet-36 Message Segment Descrpitor. Every Segment of
;the message is described by this small block. In the typical case,
;this descriptor resides in the owner's (the owner being a level of
;DECnet) portion of the Message Block.
;
;NSP's message trace facility (TRCMSG) makes illicit use of the MSD
;fields and of the nature of the position value returned by DNRPOS.
;The trace program DNTATL also knows about the structure of the MSD.
;
;Note that DTESER and D8KINT 'know' that all the fields in the MSD
;are full-words.
BEGSTR MD ;Input Meaning, ;Output Meaning
WORD NXT,QP.LEN ;MUST BE ZERO ;PTR TO NEXT MSD
WORD PTR ;ILDB PTR INTO MSG ;IDPB PTR INTO MSG
WORD AUX ;NOT USED ;ILDB PTR TO BEG OF MSG
WORD BYT ;BYTES LEFT TO READ ;BYTES WRITTEN SO FAR
FIELD VMC,3 ;VIRTUAL MAP CONTEXT
VMC.XC==:0 ;EXEC Context (Map through EPT)
VMC.US==:1 ;USER Context (Map through UPT)
VMC.NO==:2 ;DO NOT Map (Physical Address)
HWORD ALL ;ALLOCATED LENGTH IN BYTES
WORD ALA ;ALLOCATED ADDRESS OF SEGMENT'S DATA
ENDSTR
SUBTTL Structure Definitions -- DECnet-36 Message Block
;The following is the definition of the DECnet-36 Message Block. This is
;the fundamental data structure used to represent an individual message.
;The Message Block is divided up into a public section and several private
;sections which belong to each of the layers of the DECnet architecture.
;The Public Section
BEGSTR MB
WORD NXT ;PTR TO NEXT MESSAGE. MUST BE FULL
; WORD FOR NSP, SEE BEGSTR QP IN LLINKS.MAC
WORD FMS ;POINTER TO FIRST MSD (DLLs
; EXPECT THIS FIELD TO BE RIGHT HERE)
WORD MSN ;DDCMP MESSAGE NUMBER (DLLs
; EXPECT THIS FIELD TO BE RIGHT HERE)
HWORD DST ;DESTINATION NODE
HWORD SRC ;SOURCE NODE
WORD DS1 ; FIRST 32 BITS OF DESTINATION
WORD SR1 ; FIRST 32 BITS OF SOURCE
FIELD FLG,9 ;FLAGS
BIT OTH ;ON THE "OTHER" SUBLINK
BIT BOM ;BEGINNING OF MESSAGE
BIT EOM ;END OF MESSAGE
BIT EBF ;MESSAGE BLOCK HAS BEEN ALLOCATED FROM
; EMERGENCY BUFFER FREE LIST
BIT PH2 ;PHASE II MESSAGE
BIT DON ;"SYNCHRONOUS" INTERLOCK DONE BIT (NSP & SC)
BIT LCL ;BOUND FOR THE LOCAL NSP
BIT UNR ;UNREACHABLE
FIELD VST,9 ;VISITS COUNT
HWORD ABS ;Adjacency's block size
WORD CHN ;LOOPBACK CHANNEL (CIRCUIT ID)
WORD PRC ;PROCEDURE PROCESSOR (NSP & SC)
WORD AR1 ;ARGUMENT STORAGE #1 (NSP & SC)
WORD AR2 ;ARGUMENT STORAGE #2 (NSP & SC)
WORD AR3 ;ARGUMENT STORAGE #3 (NSP & SC)
ENDSTR
;Router's Section
RMH.LN==^D 21 ;BYTES FOR RTR HEADER
BEGSTR RM,MB.LST
WORD OCP ;OUTPUT CIRCUIT BLK PTR
WORD ICP ;INPUT CIRCUIT BLK PTR
WORD OAP ;OUTPUT ADJACENCY POINTER
WORD IAP ;INPUT ADJACENCY POINTER
FILLER 1 ;FILLER SO THAT FST FITS BETTER
FIELD FST,8 ;FIRST BYTE IN MESSAGE
;** THIS ORDER MUST BE ENFORCED **
;Phase III definitions
BIT MZ1 ; RESERVED (MUST BE ZERO)
BIT EVL ; EVOLUTION BIT (RESERVED)
BIT MZ2 ; RESERVED (MUST BE ZERO)
BIT RTS ; BEING RETURNED TO SENDER
BIT RQR ; RETURN REQUESTED
BIT MZ3 ; RESERVED (MUST BE ZERO)
BIT MB1 ; RESERVED (MUST BE ONE)
BIT CTL ; CONTROL MESSAGE (NOT DATA)
;
; Redefine the bits for the Phase IV packet format
; SYNSTR RMPFD,RMMZ1 ;PAD FIELD
; SYNSTR RMVER,RMEVL ;VERSION (1 IF PHASE II)
; SYNSTR RMINP,RMMZ2 ;INTRA-NI PACKET
; SYNSTR RMLGF,RMMZ3 ;LONG FORMAT HEADER
FIELD CTY,3 ; CONTROL MESSAGE TYPE
FIELD FLG,5 ;FLAG FIELD
BIT ODN ; LOCAL NSP DOESN'T WANT THIS LOCAL MESSAGE
; "ODN"ED
BIT PH2 ;MESSAGE SEEMS TO BE PHASE II
BIT TRY ;NSP wants Router to "TRYHARD" on the NI
BIT TST ;This is a test message
BIT DRM ;This message should be resent to multicast
; "All-Endnodes"
WORD MSD,MD.LEN ;ROOM FOR RTR MESSAGE DESCRIPTOR
;Note that the HDR field is only used on output and that the marks
;are only used on input, so they occupy the same space.
WORD HDR,<<RMH.LN+3>/4> ;RTR HEADER ROOM (** OUTPUT ONLY **)
WORD MK1 ;FIRST MARK
WORD MK2 ;SECOND MARK
ENDSTR
;Network Services Section
NMH.LN==^D 12 ;LENGTH OF HEADER SPACE (BYTES)
;** MUST BE AT LEAST 2 WORD FOR MARKS
BEGSTR NM,RM.LST
FIELD FLG,6 ;FLAGS
BIT ACK ;NEEDS TO BE ACKED
BIT RET ;RETURN MSG TO SC
BIT DLY ;ACK DELAY ALLOWED
FIELD SGN,12 ;MESSAGE SEGMENT NUMBER
FIELD MGF,9 ;THE MSGFLG FIELD OF THE NSP HEADER
FIELD CNT,9 ;# OF TIMES WE'VE SENT MESSAGE
WORD TIM ;TIME STAMP
WORD PRT ;PTR TO PORT BLOCK
HWORD LLA ;LOCAL LINK ADDRESS
HWORD RLA ;REMOTE LINK ADDRESS
WORD MSD,MD.LEN ;SPACE FOR MSD
WORD ORQ,QP.LEN ;ORQ queue link
WORD MAG ;Magic word for DTESRV
;Note that the HDR field is only used on output and that the marks
;are only used on input, so they occupy the same space.
WORD HDR,<<NMH.LN+3>/4> ;NSP HEADER ROOM
WORD MK1 ;FIRST MARK
WORD MK2 ;SECOND MARK
ENDSTR
;Here is the User Data Area
UDH.LN==^D16 ;BYTES OF USER DATA KEPT IN MSG BLK
BEGSTR UD,NM.LST
WORD MSD,MD.LEN ;SPACE FOR MSD
WORD DAT,<<UDH.LN+3>/4> ;ROOM FOR 16 BYTES ALWAYS AVAILABLE
ENDSTR
MB.LEN==UD.LST ;REDEFINE LENGTH OF MB
;We make use of the User Data MSD (UD.MSD) as the input MSD (on input
;all the message data is in one MSD. References to the input MSD
;should use the symbol IN.MSD.
;
XP IN.MSD,UD.MSD ;DEFINE THE INPUT MSD
;
;We will also define a first MSD (FI.MSD), which will most likely be
;RM.MSD (the router MSD), although all references to it should be
;to FI.MSD.
;
XP FI.MSD,RM.MSD ;FIRST MSD IN A MESSAGE BLOCK
;
;The following fields are used to pass the NSP. UUO arguments from
;SCxUUO and SCLUUO to SCLINK. When SCLINK returns control back to
;SCxUUO, it changes these arguments and expects SCxUUO to change them
;in the user's argument block. These arguments are stored over the
;private portions of the message block.
;
;When Session Control uses a message block like this, it can never be
;used as a conventional message block (i.e. with MSDs, etc.).
BEGSTR SA,MB.LST ;START RIGHT AFTER PUBLIC PORTION OF MB
FIELD FLG,6 ;FLAGS (NOTE: THESE MUST BE IN
; THE SAME ORDER AS NSWAI AND NSEOM)
BIT WAI ; WAIT IF USER WANTS (CHECK NS.WAI)
BIT EOM ; END OF MESSAGE FLAG
BIT BOM ; BEGINNING OF MESSAGE FLAG
BIT KCB ; KEEP CONNECT BLOCK FOR LIFE OF LINK
BIT BLK ; HIBER ROUTINE HAS BLOCKED.
;Room for future MONUSR flags
FIELD MFG,6 ;MONUSR FLAGS, NOT PART OF SAFLG!
BIT EVA ; USER BUFFER IN EXEC VIRTUAL ADDR SPACE
BIT SAT ; DATA READ SATISFIED
;Room for future monitor flags
HWORD ERR ;PLACE TO STORE ERROR RETURN
HWORD NAG ;NUMBER OF USER ARGUMENTS SUPPLIED
HWORD AFN ;FUNCTION CODE
HWORD AST ;STATUS VARIABLE
HWORD ACH ;CHANNEL OR JOB NUMBER
WORD AA1 ;ARGUMENT ONE
WORD AA2 ;ARGUMENT TWO
WORD AA3 ;ARGUMENT THREE
WORD SBP ;POINTER TO STRING BLOCK
WORD CBP ;POINTER TO CONNECT BLOCK
WORD BCT ;BUFFER BYTE COUNT
WORD BPT,2 ;BUFFER BYTE POINTER (POSSIBLY EXTENDED)
WORD SJB ;POINTER TO SESSION CONTROL JOB BLOCK
WORD SLB ;POINTER TO SESSION CONTROL LINK BLOCK
WORD SLT ;Indirect table entry this SAB belongs in
WORD HBA ;ADDRESS OF ROUTINE TO PERFORM HIBER
WORD WKA ;ADDRESS OF ROUTINE TO PERFORM WAKE
WORD UID ;SLB'S SERIAL NUMBER - FOR STALE DETECTION
ENDSTR
IFG <SA.LST-MB.LEN>,<IF2,<PRINTX ?Session Control SA structure is longer
PRINTX ? than a message block.>>
SA.LEN==SA.LST+1 ;MAKE SA.LEN INCLUDE MB.LEN
SUBTTL Structure Definitions -- Session Control Link Block
;This is the sub-link block. There are two of these in the SL block, one
;for the normal sub-link and one for the other sublink.
BEGSTR SS
FIELD FLG,18 ;FLAG FIELD
BIT OTH ;INDICATES THIS IS THE "OTHER" SUB-LINK
FIELD XDO,9 ;SUBLINK TRANSMIT DRQS OUTSTANDING
FIELD RDO,9 ;SUBLINK RECEIVE DRQS OUTSTANDING
WORD INQ,QH.LEN ;SUBLINK INPUT QUEUE
ENDSTR
;This is the Session Control Link Block. It contains all the per-logical
;link data.
BEGSTR SL ;SESSION CONTROL LINK BLOCK
WORD ASQ ;NEXT SLB ON ALL SLBs QUEUE
WORD NXP ;NEXT SLB WITH ACTIVE PSI
WORD JFQ ;NEXT SLB WITH ACTIVE JIFFY REQUEST
WORD SLB ;CHECK POINTER TO THIS SLB
WORD SJB ;POINTER TO JOB BLOCK (SJB)
WORD CHN ;CHANNEL NUMBER (STARTS AT 1)
HWORD DOB ;DESTINATION OBJECT TYPE
HWORD SOB ;SOURCE OBJECT TYPE
FIELD FLG,18 ;FLAG FIELD
BIT CCB ; CHECK CONNECT BLOCK
BIT KCB ; KEEP CONNECT BLOCK FOR LIFE OF LINK
BIT PSI ; PSI PENDING FLAG
BIT PH2 ; PHASE II HAS NO RESEND CAPABILITY
BIT ABO ; TRYING TO CLOSE AFTER ABORT & RELEASE
BIT FSL ; FREE THE SLB WHEN DONE WITH ALL PROCESSING
BIT BSY ; SLB IS BUSY (CANNOT BE FREED)
BIT LBC ; LINK IS BEING CLOSED BY NSP
BIT JFR ; JIFFY REQUEST OUTSTANDING
BIT EOM ; LAST SEGMENT OUTPUT WAS END OF MESSAGE
BIT PAS ; Set if this SLB belongs to a passive task
FIELD STA,6 ;SESSION CONTROL STATE
FIELD XFL,3 ;TRANSMIT FLOW CONTROL OPTION
FIELD RFL,3 ;RECEIVE FLOW CONTROL OPTION
HWORD GOL ;RECEIVE DATA REQUEST GOAL
HWORD INQ ;INPUT QUOTA FOR LINK
HWORD OTQ ;OUTPUT QUOTA FOR LINK
HWORD INU ;INPUT BUFFERS IN USE
HWORD OTU ;OUTPUT BUFFERS IN USE
HWORD SST ;LINK STATUS WORD
HWORD PSM ;THE PSI MASK
WORD NSL,SS.LEN ;"NORMAL" SUBLINK
WORD OSL,SS.LEN ;"OTHER" SUBLINK
HWORD DRR ;NORMAL DATA REQUESTS TO RESEND AT CLOCK LEVEL
HWORD RSN ;REASON CODE OF DISCONNECT OR REJECT (16 BITS)
WORD PID ;NSPpid OF PORT
HWORD DNA ;DESTINATION NODE ADDRESS
HWORD SIZ ;SEGMENT SIZE IN BYTES
WORD CTM ;CONNECT INITIATE TIMER
WORD WKA ;ADDRESS OF WAKEUP ROUTINE
WORD CDM ;PTR TO CONNECT/DISCONNECT MESSAGE
WORD CBP ;POINTER TO CONNECT BLOCK FOR PASSIVE TASK
WORD OTM ;PTR TO PARTIALLY FILLED OUTPUT MESSAGE
WORD UID ;SERIAL NUMBER - FOR STALE DETECTION
HWORD BYS ;User bytes sent
HWORD BYR ;User bytes received
HWORD PKS ;PACKETS SENT OUT
HWORD PKR ;PACKETS RECIEVED
ENDSTR
SUBTTL Structure Definitions -- Session Control Job Block
;We allocate SLT.LN number of channels in the channel table in the SJB
;itself. When a job has more than SLT.LN channels open, we allocate
;the table from free core.
;
XP SLT.LN,4 ;LENGTH OF INITIAL SLB TABLE
;
;There is one Session Control Job Block for every job with an open
;logical link on the system.
BEGSTR SJ ;SESSION CONTROL JOB BLOCK
WORD NXT ;NEXT JOB BLOCK IN SYSTEM
WORD CHT ;PTR TO SLB TABLE (INDEXED BY CHANNEL)
WORD CHC ;COUNT OF SPACES ALLOCATED IN SLB TABLE
WORD PSJ ;POINTER TO SYSTEM'S POINTER TO THE SJB
; THIS POINTS TO PDBSJB ON TOPS-10 AND
; IS USED FOR RESET PROCESSING
FIELD FLG,9 ;FLAGS FIELD
IFN FTOPS20,BIT BLK ;(20 )THIS FORK IS BLOCKED
IFN FTOPS10,BIT PRV ;(10 )USER IS PRVJ PRIVILEGED
BIT RST ;(both)RESET IN PROGRESS
IFN FTOPS10,FIELD JOB,9 ;(10)JOB NUMBER
IFN FTOPS20,FIELD FRK,9 ;(20)FORK NUMBER
HWORD CTA ;NUMBER OF CI TIMERS ACTIVE FOR JOB
WORD SLT,SLT.LN ;INITIAL SLB TABLE
WORD TXQ,QH.LEN ;TRANSACTION QUEUE OF LLINKS CALLS
WORD PSQ,QH.LEN ;QUEUE OF SLBs WITH PSIs OUTSTANDING
;Note that the following two quotas are copied in SCUUO from the PDB's
;information about the job quotas
HWORD GOL ;INPUT DATA REQUEST GOAL
HWORD INQ ;JOB INPUT QUOTA
HWORD OTQ ;JOB OUTPUT QUOTA
HWORD INU ;BUFFERS USED TOWARD INPUT QUOTA BY JOB
HWORD OTU ;BUFFERS USED TOWARD OUTPUT QUOTA BY JOB
WORD SAB ;SA BLOCK POINTER
IFN FTOPS10,WORD MUU ;(10)SAVE MUUO WORD HERE FOR STOTAC, ETC
IFN FTOPS20,<
WORD PRT ;(20)Pointer to the port indirect table
WORD MXP ;(20)Number of slots in port table
> ;End of FTOPS20
ENDSTR
SUBTTL Structure Definitions -- NSP Sublink Block
;The Sublink Block is part of the link block. It holds the information
;about the "normal" and the "other" sublinks.
;
;The structure name ES is used instead of the more obvious NS
;(NSP Sublink) to avoid a conflict with the other NS structure
;defined in this universal file. The "E" stands for the new
;name for the NSP layer: "End-to-end" layer.
BEGSTR ES
FIELD FLG,12 ;FLAGS, KEEP FIELD MOD 3 WIDE FOR DDT
BIT OTH ;SET IF THIS IS OTHER SUBLINK
BIT ACK ;SEND ACK FOR THIS SUBLINK NEXT JIFFY
BIT NAK ;SEND NAK TO PH2 NSP (TURN ACK ON TOO)
BIT ROF ;RECEIVE IS OFF
BIT ROC ;RECEIVE OFF HAS CHANGED
BIT XOF ;XMIT IS OFF
; BIT XOC ;XMIT OFF HAS CHANGED (NOT USED)
BIT BFR ;REMOTE IS "BUFFER-RICH" ON THIS LINK
BIT DLY ;ACK DELAYING ALLOWED
FILLER 1 ;MAKE FOLLOWING FIELD PRETTY FOR DDT
FIELD RFL,2 ;RECEIVE FLOW CONTROL TYPE
FILLER 1 ;MAKE FOLLOWING FIELD PRETTY FOR DDT
FIELD XFL,2 ;XMIT FLOW CONTROL TYPE
FIELD GOL,9 ;DATA REQUEST GOAL (9 FOR DDT EASE)
FIELD CGL,9 ;AFTER-CONGESTION RECOVERY GOAL
NXTWRD
FIELD XLD,8 ;XMIT DRQS OUTSTANDING TO LOCAL SC
FIELD XRD,8 ;XMIT DRQS OUTSTANDING TO REMOTE NSP
FIELD XSD,8 ;XMIT DRQS NEED TO SEND TO SC
NXTWRD
FIELD RLD,8 ;RECEIVE DRQS OUTSTANDING TO LOCAL SC
FIELD RRD,8 ;RECEIVE DRQS OUTSTANDING TO REMOTE NSP
FIELD RSD,8 ;RECEIVE DRQS NEED TO SEND TO SC
NXTWRD
FIELD LMA,12 ;LAST MESSAGE NUMBER ASSIGNED
FIELD LAR,12 ;LAST ACK RECEIVED (AND PROCESSED)
FIELD LMR,12 ;LAST MESSAGE RECEIVED
WORD AKQ,QH.LEN ;QUEUE HEADER FOR THE TO-BE-ACKED Q
WORD RCQ,QH.LEN ;QUEUE HEADER FOR THE RECEIVE Q
WORD XMQ,QH.LEN ;QUEUE HEADER FOR THE XMIT Q
FIELD CWS,12 ;Current window size
FIELD CDA,12 ;# of ACKs since last window change
FIELD DLT,12 ;ACK delay timer
ENDSTR
SUBTTL Structure Definitions -- NSP LINK Block
;The Link Block holds all the NSP information about this logical link.
BEGSTR EL
WORD APQ,QP.LEN ;NEXT IN QUEUE OF ALL LINK BLOCKS
WORD HBQ,QP.LEN ;NEXT IN QUEUE OF LINKS IN A HASH BUCKET
WORD JFQ,QP.LEN ;NEXT IN QUEUE OF LINKS NEEDING JIFFY SERVICE
FIELD FLG,9 ;FLAGS, MOD 3 NUMBER OF BITS FOR DDT
BIT OJQ ;LINK IS ON THE JIFFY-REQUEST QUEUE
BIT SNC ;SET IF NOT YET TOLD SC ABOUT NO CONF
BIT CNF ;SET IF WE HAVE CONFIDENCE IN LINK
BIT SCM ;SEND CONNECT ACK MESSAGE NEXT JIFFY
BIT SDM ;SEND DISCONNECT CONFIRM MESSAGE NEXT JIFFY
BIT ABO ;ABORTING THIS LOGICAL LINK
BIT DTO ;DELAY TIMER IS FOR "OTHER" SUBLINK
FIELD STA,6 ;NSP STATE OF THIS LINK
HWORD SIZ ;MAX SIZE OF A SEGMENT ON THIS LINK
HWORD LLA ;LOCAL LINK ADDRESS
HWORD RLA ;REMOTE LINK ADDRESS
WORD ORQ,QH.LEN ;Queue header for MBs sent to ROUTER and
; expected to be returned to LLINKS
WORD CLC ;Count of retries left, trying to close a
; port waiting for MBs to be returned from
; ROUTER and children.
HWORD ORC ;COUNT OF MSGS OUT IN ROUTER
FIELD VER,3 ;VERSION OF REMOTE NSP, SEE VER3.1,VER3.2
FILLER 3 ;MAKE DTM RIGHT JUSTIFIED FOR DDT
FIELD DSG,12 ;MSG SEGMENT BEING TIMED FOR DELAY CALC
; (MUST BE SEGNUM-SIZE FIELD FOR CMODxx)
WORD DTM ; AND TIME IT WAS FIRST SENT
HWORD NNM ;THE REMOTE'S NODE NUMBER
WORD NDB ;PTR TO NSP NODE BLOCK
WORD TMA ;INACTIVITY TIMER
WORD SCV ;SESSION CONTROL CALL VECTOR BASE ADDRESS
WORD SCB ;SESSION CONTROL BLOCK ID
WORD CIM ;Ptr to (R)CI message
WORD DIM ;PTR TO DI MESSAGE
WORD NSL,ES.LEN ;THE NORMAL SUBLINK BLOCK
WORD OSL,ES.LEN ;THE OTHER SUBLINK BLOCK
WORD CIR ;OUTPUT CIRCUIT FOR LOOPBACK CONNECTION
WORD CHK ;ADDRESS OF THIS EL, FOR ADDR CHECK
ENDSTR
SUBTTL Structure Definitions -- Router Adjacency Block
BEGSTR AJ
WORD NXT ;Pointer to next adjacency block
FIELD STA,2 ;Adjacency state
FIELD NTY,4 ;Neighbor node type
FIELD FLA,6 ;Flag field
BIT PH4 ;Phase 4 node
BIT VRQ ;Verification requested by remote
BIT BLO ;Blocking is requested by this node
BIT RJF ;Reject flag
BIT MTA ;No multi-cast traffic accepted
FIELD VER,8 ;Version of neighbor's router
FIELD ECO,8 ;ECO number of neighbor's router
FIELD CUS,8 ;Customer version of neighbor's router
WORD NAH ;Adjacency's hi-order address (NI)
FIELD NAL,18 ;Low order in string format <a1,a2>
FILLER 2
FIELD NAA,6 ;Adjacency's node area
FIELD NAN,10 ;Adjacency's node number
MSKSTR (AJADR,AJ.NAN,<AJNAA!AJNAN>) ; 16 bit address of adjacency
; Make a macro to be sure masks are in same word
WORD RTV ;Pointer to this adjacency's routing vector
WORD CBP ;Circuit block for this adjacency
WORD BSZ ;Block size requested by neighbor
WORD NHT ;Neighbor's hello timer
WORD TLR ;Time last message received from adjacency
FIELD PRI,8 ;Routers priority to be designated router (NI)
FIELD ARE,8 ;Routers area (reserved field)
FIELD MPD,^D16 ;MPD (reserved)
ENDSTR
;These are the various types of nodes (in FIELD AJNTY).
XP ADJ.3F,0 ;Phase III routing node
XP ADJ.3S,1 ;Phase III non-routing node
XP ADJ.L2,3 ;Phase IV level II router
XP ADJ.L1,4 ;Phase IV level I router
XP ADJ.LN,5 ;Phase IV non-routing
ADJ.MX==ADJ.LN ;Maximum node type
;These are the various states in field AJSTA
XP ADJ.UN,0 ;This entry is currently unused
XP ADJ.IN,1 ;Currently initializing
XP ADJ.UP,2 ;Adjacency is up
XP ADJ.OL,3 ;Adjacency is off-line
SUBTTL Structure Definitions -- Router Circuit Block
;This structure contains all the "per-circuit" data for Router-36.
BEGSTR RC
WORD NXT ;Pointer to next circuit block
WORD LID ;Circuit ID
WORD DLB ;Data link block address
WORD AJQ,QH.LEN ;Queue of adjacencies belonging to this circuit
FIELD FLG,6 ;Place for some flags
BIT BCT ; Broadcast circuit (should be bit 0)
BIT SRM ; Send routing message flag
BIT EBU ; Emergency buffer is in use
BIT SHM ; Send hello message
BIT DSR ; We are the designated router
FIELD STA,3 ; Circuit state
FIELD CST,12 ; Circuit cost
FIELD DRT,9 ; Timer before we assume DSR role
WORD TLS ;Time last message of any type was sent
WORD TLR ;Time last routing message was sent
WORD TLH ;Time we sent the last hello (NI only)
WORD TIN ;Time we got protocol up from controller
WORD TM3 ;Hello message timer
HWORD BSZ ;Minimum of adjacencies' block sizes
HWORD RBS ;Receive block size for this circuit
HWORD MXR ;Maximum routers allowed on this circuit
HWORD NRO ;Number of routers online
WORD DSH ;ID of current designated router (NI only)
HWORD DSL ; ...
HWORD PRI ;Priority to be designated router (NI only)
WORD JSQ,QH.LEN ;Queue header for jiffy resend queue
;Circuit counters:
WORD CMQ ; Messages queued
WORD CLC ; Local messages
WORD SLZ ; (0) Time stamp of when last zeroed.
WORD CAP ; (800) Arriving packets received (to NSP)
WORD CDP ; (801) Departing packets sent (from NSP)
WORD CAL ; (802) Arriving congestion loss (to NSP)
WORD CTR ; (810) Transit packets received
WORD CTS ; (811) Transit packets sent
WORD CTL ; (812) Transit congestion loss
WORD CCD ; (820) Circuit down events
WORD AJD ; Adjacency down
WORD CIF ; (821) Initialization failures
WORD BSX ; (xxxx) Adjacency block size exceeded /output
ENDSTR
;These are the possible circuit states (in FIELD RCSTA).
XP RCS.OF,0 ;Off, not to be looked at
XP RCS.RJ,1 ;Rejected - Attempt to queue output failed
XP RCS.FA,2 ;Failed - Received line down from DLL
XP RCS.WT,3 ;Waiting for protocol up (initializing)
XP RCS.TI,4 ;Waiting for Router inititialization message
XP RCS.TV,5 ;Waiting for Router verification message
XP RCS.TT,6 ;Through-put testing (or whatever)
XP RCS.RN,7 ;Circuit is up and running
SUBTTL Structure Definitions -- DNADLL data link block
BEGSTR DL
WORD NXT ; Link to next data link block
WORD UID ; ID supplied by DNADLL user
WORD DID ; Device ID
FIELD FLG,6 ; Data link flags
BIT RUN ; Data link is running
BIT EBU ; Emergency buffer in use
BIT LIU ; Line in use by circuit
HWORD KNO ; Kontroller number (DTE only)
WORD UNB ; Pointer to the User-NI block
WORD PID ; Portal ID
WORD LTP ; Line table pointer
WORD SLZ ;(0) Seconds since last zeroed
WORD BYR ;(1000) Total bytes received
WORD BYS ;(1001) Total bytes sent
WORD DBR ;(1010) Total data blocks received
WORD DBS ;(1011) Total data blocks sent
WORD UBU ;(1065) User buffer unavailable
ENDSTR
;Router test message data block
IFN FTRTST,<
BEGSTR TR
WORD TND ; Node to test with
WORD TSN ; Serial number of message
WORD TAF ; Time when message reaches RTRFWD
WORD TIC ; Time at input complete
WORD TOC ; Time when output complete is received
WORD TTD ; Time given to DLL
WORD TTA ; Total time to turn around (TIC-TAF)
WORD TED ; Time to get from FWD to DLL (TTD-TAF)
WORD TFD ; Time from forward to output done (TTF-TOC)
ENDSTR
> ;End FTRTST
;This structure describes the DECnet word in the TOPS-10 PDB.
;Note that this field never made it into the PDB.
BEGSTR PD ;DECNET WORD IN PDB
FIELD GOL,12 ;PROCESS'S GOAL
FIELD DQT,12 ;PROCESS'S DEFAULT QUOTA
FIELD IPR,12 ;PROCESS'S INPUT PERCENTAGE
ENDSTR
SUBTTL Value Definitions -- NSP Port States
;Define the Port State constants
DEFINE STATE(st),<
ZZ==ZZ+1
NPS.'st==ZZ>
ZZ==0
STATE OP ;OPEN, WAITING FOR ENTER ACTIVE FROM SC
STATE CI ;CONNECT INITIATE SENT
STATE CD ;CONNECT DELIVERED
STATE CR ;CONNECT RECEIVED
STATE CC ;CONNECT CONFIRM
STATE DR ;DISCONNECT REJECT
STATE RC ;DISCONNECT REJECT COMPLETE (DRC)
STATE RN ;RUN
STATE RJ ;REJECT
STATE DI ;DISCONNECT INITIATE
STATE IC ;DISCONNECT INITIATE COMPLETE (DIC)
STATE DN ;DISCONNECT NOTIFICATION
STATE CN ;CLOSE NOTIFICATION
STATE NR ;NO RESOURCES
STATE NC ;NO COMMUNICATION
STATE CL ;CLOSED
STATE DP ;DESTROY PORT
PURGE ZZ,STATE
SUBTTL Value Definitions -- DECnet Standard Parameters
;The REASON values for a Disconnect Initiate or Disconnect Confirm message
..RDX==10 ;SAVE PRESENT RADIX
RADIX 10 ;USE DECIMAL FOR THE REASONS
RSNRBO==0 ;REJECTED BY OBJECT
RSNDBO==0 ;DISCONNECTED BY OBJECT (WHEN RUNNING)
RSNRES==1 ;NO RESOURCES
RSNUNN==2 ;UNRECOGNIZED NODE NAME
RSNRNS==3 ;REMOTE NODE SHUT DOWN
RSNURO==4 ;UNRECOGNIZED OBJECT
RSNIOF==5 ;INVALID OBJECT NAME FORMAT
RSNOTB==6 ;OBJECT TOO BUSY
RSNABM==8 ;ABORT BY MANAGEMENT
RSNABO==9 ;ABORT BY OBJECT
RSNINF==10 ;INVALID NODE NAME FORMAT
RSNLNS==11 ;LOCAL NODE SHUT DOWN
RSNACR==34 ;ACCESS CONTROL REJECTION
RSNNRO==38 ;NO RESPONSE FROM OBJECT
RSNNUR==39 ;NODE UNREACHABLE
RSNNLK==41 ;NO LINK
RSNDSC==42 ;DISCONNECT COMPLETE
RSNIMG==43 ;IMAGE FIELD TOO LONG (RQSTRID,
; PASSWORD, ACCOUNT, USRDATA, ETC)
RADIX ..RDX ;RESTORE PREVIOUS RADIX
SUBTTL Value Definitions -- DECnet-wide states
;The following states are from the possible executor states as defined
;by Network Management. This state is contained in the cell DCNSTA
;located in D36COM.
XP DS.ON,0 ;ON
XP DS.OFF,1 ;OFF
XP DS.SHU,2 ;SHUT
XP DS.RES,3 ;RESTRICTED
SUBTTL Inter-Layer Parameters -- Overall Argument Conventions
;Session Control will be called with the following basic calling
;sequence:
;Call: T1/ Function-specific argument, see below
; T2/ Function-specific argument, see below
; T3/ Function code = SV.xxx, defined below
; T4/ Full-word pointer to a message block
; CALL @NP.SCV(PB)
; Normal Return
;Changes T1,T2,T3,T4, preserves all others
;NSP will be called with the following basic calling sequence:
;Call: T1/ Function-specific argument, see below
; T2/ Function-specific argument, see below
; T3/ Function code = NV.xxx, defined below
; T4/ Full-word pointer to a message block
; CALL NSP
; Normal Return
;Changes T1,T2,T3,T4, preserves all others
;Router will be called with the following basic calling sequence:
;Call: T1/ RT%RQR set if return is requested on transmission failure
; MB/ Pointer to the message block
; CALL RTRXMT
; Normal Return
;Changes T1,T2,T3,T4, preserves all others
;The DLL layer kontrollers are called with the the following sequence:
;Call: T1/ Kontroller Function (KF.xxx)
; T2/ Pointer to Line Block to use
; T3/ Function dependant data (usually pointer to message block)
; CALL CALKON
; Normal Return
;Changes T1-T4
SUBTTL Inter-Layer Parameters -- Session Control Function Codes
;These are the function codes for the calls to Session Control from
;NSP.
XP SV.CCR, 0 ;CONNECT CONFIRMED CALL
XP SV.DIR, 1 ;DISCONNECT INITIATE RECEIVED CALL
XP SV.DCR, 2 ;DISCONNECT CONFIRM RECEIVED CALL
XP SV.OND, 3 ;OUTPUT NOT DONE CALL
XP SV.ODN, 4 ;OUTPUT DONE CALL
XP SV.SEG, 5 ;SEGMENT RECEIVED CALL
XP SV.DRQ, 6 ;DATA REQUEST RECEIVED CALL
XP SV.NCF, 7 ;NO CONFIDENCE IN PORT CALL
XP SV.NRS,10 ;NO RESOURCES CALL
XP SV.CLS,11 ;CLOSE COMPLETED CALL
XP SV.NLK,12 ;NO LINK CALL
XP SV.NCM,13 ;NO COMMUNICATION CALL
XP SV.NRN,14 ;NOT IN RUN STATE
XP SV.CAK,15 ;CONNECT ACKNOWLEGE CALL
;The Connect Initiate call does not go
;through the vectored interface, since
;it must go to a single routine
;capable of sorting out which Session
;Control will handle the incoming
;message. the connect initiate call
;goes to the global label SCTLCI.
SUBTTL Inter-Layer Parameters -- NSP Function Codes
XP NV.OPN, 0 ;OPEN FROM SESSION CONTROL
XP NV.ACT, 1 ;ENTER ACTIVE FROM SESSION CONTROL
XP NV.ACC, 2 ;ACCEPT CONNECT FROM SESSION CONTROL
XP NV.REJ, 3 ;REJECT CONNECT FROM SESSION CONTROL
XP NV.SEG, 4 ;SEND SEGMENT FROM SESSION CONTROL
XP NV.DRQ, 5 ;REQUEST DATA FOR SESSION CONTROL
XP NV.GOL, 6 ;SET QUOTA/GOAL FROM SESSION CONTROL
XP NV.DSC, 7 ;SEND DISCONNECT FROM SESSION CONTROL
XP NV.ABO,10 ;SEND ABORT FROM SESSION CONTROL
XP NV.CLS,11 ;CLOSE PORT FROM SESSION CONTROL
XP NV.RVF,12 ;FIRST ROUTER CALL VECTOR OFFSET
XP NV.RCV,12 ;RECEIVE MESSAGE FROM ROUTER
XP NV.ODN,13 ;OUTPUT DONE FROM ROUTER
XP NV.RTS,14 ;RETURN TO SENDER FROM ROUTER
XP NV.RFR,15 ;Returned to sender from remote router
XP NV.RVL,15 ;LAST ROUTER CALL VECTOR OFFSET
SUBTTL Inter-Layer Parameters -- Session Control/NSP
;Arguments passed between Session Control and NSP:
;Flow Control Mode, for NSP and Session Control. These must not be
;changed, as they mirror definitions in the protocol.
XP FCM.NO,0 ;NO FLOW
XP FCM.SG,1 ;SEGMENT
XP FCM.MG,2 ;MESSAGE
XP FCM.XX,3 ;RESERVED
;The DATA REQUEST call's argument definitions for T2
BEGSTR QA
FIELD FLG,6
; BIT OFF ;SET IF THE SUBLINK IS TO BE TURNED OFF
HWORD CNT ;THE DATA REQUEST COUNT BEING REQUESTED
ENDSTR ;IF NEGATIVE, ITS 2'S COMPLEMENT IN FIELD
; HALF WORD SO LOADE CAN MAKE HRRE
;Some of the calls between Session Control and NSP require more arguments
;than will fit into the two registers reserved for argument passing.
;These calls pass instead a pointer to an argument block. The formats
;of those blocks are described here.
;The OPEN call's argument block
BEGSTR OA ;OPEN ARGUMENT BLOCK
WORD SCB ;SCB ID FOR NEW PORT
WORD NOD ;DESTINATION NODE
WORD FLO ;FLOW CONTROL TYPE
WORD GOL ;DATA REQUEST GOAL
WORD SIZ ;MAX BYTES ALLOWED IN A MESSAGE SEGMENT
WORD SCV ;SESSION CONTROL'S ENTRY ADDRESS
WORD CIR ;LOOPBACK CIRCUIT
ENDSTR
;The ACCEPT call's argument block
BEGSTR AA ;ACCEPT ARGUMENT BLOCK
WORD SCB ;SCB ID FOR NEW PORT
WORD PID ;NSP'S PORT IDENTIFIER
WORD FLO ;FLOW CONTROL TYPE
WORD GOL ;DATA REQUEST GOAL
WORD SIZ ;MAX BYTES ALLOWED IN A MESSAGE SEGMENT
WORD SCV ;SESSION CONTROL'S ENTRY ADDRESS
ENDSTR
;The Connect Initiate and Connect Confirm calls' argument format for T2.
;T1 holds the NSPpid for the new logical link.
BEGSTR IA
HWORD FLO ;FLOW CONTROL TYPE
HWORD SIZ ;MAX BYTES ALLOWED IN A MESSAGE SEGMENT
;SOURCE NODE ID AND ROUTER CHANNEL ARE
; IN THE PUBLIC PART OF THE MESSAGE BLOCK
ENDSTR
SUBTTL Inter-Layer Parameters -- NSP/Router
;Arguments passed between NSP and Router:
;NSP passes this flag in T1 to Router on a call to RTRXMT if it wants
;to request a return of the message it is sending.
XP RT%RQR,1B0 ;RETURN REQUESTED ON TRANSMISSION FAILURE
XP RT%ODN,1B1 ;RETURN MESSAGE BLOCK TO NSP WHEN OUTPUT DONE
XP RT%TRY,1B2 ;TRYHARD WHEN OUTPUT CIRCUIT IS NI
;NSP passes this flag in T1 to Router on a call to RTRINI, to say that he
;is the one and only NSP which will take Phase II messages.
XP RT%PH2,1B0 ;I AM THE "PHASE2" NSP
SUBTTL Inter-Layer Parameters -- Router/DLL
;The interface between Router and the DLL is vectored. These are the
;functions codes of the interrupts which the DLL ("kontroller") will
;pass to Router.
XP DI.ODN,1 ;OUTPUT DONE
XP DI.INC,2 ;INPUT COMPLETE
XP DI.LSC,3 ;LINE STATE CHANGE
XP DI.ICB,4 ;INITIALIZE CIRCUIT BLOCK
;The DLL performs these functions for Router.
XP DF.OPN,0 ;OPEN THE CIRCUIT
XP DF.CLS,1 ;CLOSE THE CIRCUIT
XP DF.XMT,2 ;TRANSMIT MESSAGE
;The DLL preforms these functions for Network management (NTMAN)
XP DF.SET,3 ;NTMAN - SET FUNCTION
XP DF.CLR,4 ;NTMAN - CLEAR FUNCTION
XP DF.RED,5 ;NTMAN - READ FUNCTION
XP DF.SHC,6 ;NTMAN - Show counters
XP DF.SZC,7 ;NTMAN - Show and zero counters
XP DF.RET,10 ;NTMAN - Return list (e.g. show known lines)
XP DF.A2N,11 ;NTMAN - Map node address to name
XP DF.N2A,12 ;NTMAN - Map node name to address
XP DF.CET,13 ;NTMAN - Check entity
XP DF.MAX,DF.CET ;MAXIMUM FUNCTION NUMBER
;These are needed until NTMAN is modernized
XP KF.SET,5 ;Set parameters
XP KF.CLR,6 ;Clear parameters
XP KF.RED,7 ;Read parameters
;These are DTESRV specific functions
XP DD.OPN,0 ; Open circuit
XP DD.CLS,1 ; Close circuit
XP DD.QUE,2 ; Queue output buffer
XP DD.PRB,3 ; Post receive message block
XP DD.CKE,4 ; Check existance of DTE
XP DD.MAX,DD.CKE ; Maximum function number
;These are the generic line states.
XP LS.ON,0 ; On
XP LS.OFF,1 ; Off
XP LS.SRV,2 ; Service
XP LS.CLR,3 ; Cleared
;These are the error codes CIDLL will return to DNADLL on non-network
; management functions.
XP CIEBAS,2000 ;CI errors have a base of 2000
XP CNSUC%,0!CIEBAS ;Success
XP CNNCI%,1!CIEBAS ;No CI interface present
XP CNNRE%,2!CIEBAS ;No resources
XP CNNSP%,3!CIEBAS ;No such port
XP CNPNA%,4!CIEBAS ;Port block not allocated
XP CNPAO%,5!CIEBAS ;Port is already open
XP CNLPT%,6!CIEBAS ;Local port is illegal
XP CNPWS%,7!CIEBAS ;Port is in wrong state
XP CNIMS%,10!CIEBAS ;Illegal message size
XP CNXMF%,11!CIEBAS ;SCA datagram send failed
SUBTTL Inter-Layer Parameters -- Layer/NMX (Event logger)
;The interface between a layer and the event logger in NTMAN is vectored.
;These are the function codes a layer will pass to NTMAN.
XP EV.GEC,0 ;Get an EC block
XP EV.REC,1 ;Release an EC block
XP EV.FIL,2 ;Filter an event
XP EV.LOG,3 ;Log an event
XP EV.SIG,4 ;Log a signal
SUBTTL Network Management -- Argument blocks
;The following is the defintion of the Line-ID that router maps into
;a line block address. This is used
; On an initial open from the DLL to ROUTER;
; By router to determine an Kontroller specific peculiarities;
; By network management to communicate with ROUTER.
BEGSTR LI ;LINE-ID
FIELD LXC,1 ; BIT INDICATING LINE ID OR CIRCUIT ID.
FILLER 2 ; (BIT=0 MEANS CIRCUIT, =1 MEANS LINE)
FIELD DEV,6 ; DEVICE TYPE
FIELD KON,9 ; CONTROLLER NUMBER (CPU# FOR DTE'S AND CI'S)
FIELD UNI,9 ; UNIT NUMBER
FIELD DRP,9 ; DROP NUMBER (PORT FOR CI'S)
ENDSTR
;These are the bits indicating which of the above fields are present
XP KD.DEV,1 ;DEVICE NAME (ALWAYS PRESENT)
XP KD.KON,2 ;CONTROLLER NUMBER
XP KD.UNI,4 ;UNIT NUMBER
XP KD.DRP,10 ;DROP NUMBER
;These are the types of devices that we know about (in field LIDEV).
XP LD.TST,0 ;TEST BED DRIVER (OBSOLETE)
XP LD.DTE,1 ;DTE
XP LD.KDP,2 ;KDP
XP LD.DDP,3 ;DDP
XP LD.CIP,4 ;CI PORT
XP LD.NI,5 ;ETHERNET
XP LD.DMR,6 ;DMR
LD.MAX==LD.DMR
;Define block of ''globals'' used by NMX
BEGSTR NX
FIELD FLG,7 ;FLAGS
BIT WRM ;WRITING MONITOR'S DATA BASE. 1=WRITING
BIT WUS ;WRITING USERS DATA STRING. 1=WRITING
BIT ZMC ;ZEROING OR CLEARING MONITOR CORE.
BIT CXP ;COUNTER=1 OR PARAMETER=0.
BIT NIL ;NOT IN LAYER. (I DIDN'T BIT)
BIT ECV ;DO ENTITY CONVERSION
BIT MCX ;BUFFER IS IN MONITOR CONTEXT
FILLER 2
FIELD NTY,3 ;NODE TYPE, IF NODE.
XP NX.EXN,1 ;EXECUTOR NODE
XP NX.REN,2 ;REMOTE NODE
XP NX.LPN,3 ;LOOPBACK NODE
FIELD LTY,3 ;LINE TYPE
XP NX.TST,0 ;TEST BED DRIVER (OBSOLETE)
XP NX.DTE,1 ;DTE
XP NX.KDP,2 ;KDP
XP NX.DDP,3 ;DDP
XP NX.CIP,4 ;CI PORT
XP NX.NI,5 ;ETHERNET
XP NX.DMR,6 ;DMR
FIELD ENT,3 ;ENTITY TYPE
HWORD PRM ;PARAMETER/COUNTER IDENTIFIER.
WORD NUM ;ENTITY SEQUENCE NUMBER. (NODE ADDR OF LINE ID)
WORD VAL,8 ;MAXIMUM STRING SIZE (32 BYTES)
WORD MBY ;MAXIMUM NUMBER OF BYTES
WORD ADR ;USER VIRTUAL ADDRESS OF ARGUMENT BLOCK
WORD UUO ;SAVED CALLING UUO (NEED FOR STOTAC)
WORD EID,BP.LEN ;STRING POINTER TO ENTITY ID
WORD FNC ;FUNCTION CODE.
WORD SEL ;SELECTION CRITERIA FOR FUNCTION.
WORD DAT,BP.LEN ;STRING POINTER FIELD TO DATA STRING
WORD ERR ;ERROR CODE.
ENDSTR
;A special error code
NEADC%==^D47
SUBTTL Network Management -- NSP and ROUTING VERSION Number Formats
;Define NSP and Routing Version number words
BEGSTR VN
FIELD VER,8 ;Version number
FIELD ECO,8 ;ECO number
FIELD UCO,8 ;User ECO number
FILLER 12 ;Fill up the word
ENDSTR
;Define Counter Block Sub-fields
BEGSTR KB
FIELD BMF,1 ;Bit Map Flag
FIELD WID,^D17 ;Counter width in bits
HWORD TYP ;Counter Type (Number)
WORD VAL ;Counter Value
WORD MSK ;Bit Mask
ENDSTR
SUBTTL Network Management -- Values used by NMX
XP NSXILL,0 ;ILLEGAL
XP NSXVRS,1 ;NSP VERSION NUMBER
XP NSXECO,2 ;ECO NUMBER
XP NSXUEC,3 ;USER ECO NUMBER
XP NSXDLY,4 ;DELAY
XP NSXDLW,5
XP NSXIAT,6 ;
XP NSXRTM,7 ;RESPONSE TIMEOUTS
;Line states according to NMX
XP NCK.ON,0 ;CIRCUIT/LINE STATE ON
XP NCK.OF,1 ;STATE OFF
XP NCK.SR,2 ;SERVICE
XP NCK.CL,3 ;CLEARED
;Line substates according to NMX
XP NCB.ST,0 ;--STARTING
XP NCB.SN,^D10 ;--SYNCHRONIZING
XP NCB.FA,^D11 ;--FAILED
;Circuit states according to Router
XP RNS.OF,0 ; Off
XP RNS.FA,1 ; Failed
XP RNS.ST,2 ; Starting
XP RNS.ON,3 ; Running
;Network management node states
XP RM.REA,4 ;Reachable
XP RM.UNR,5 ;Unreachable
;For LLINKS and ROUTER
;Entity types
XP .NTNON,-1
XP .NTNOD,0 ;NODE ENTITY
XP .NTLIN,1 ;LINE
XP .NTLOG,2 ;LOGGING
XP .NTCKT,3 ;CIRCUIT
XP .NTMOD,4 ;MODULE
XP .NTARE,5 ;AREA
;Qualifiers for functions
XP .NTSGN,-5 ;SIGNIFICANT ;(FOR .NTRET)
XP .NTADJ,-4 ;ADJACENT
XP .NTLOP,-3 ;LOOP
XP .NTACT,-2 ;ACTIVE ITEMS
XP .NTKNO,-1 ;KNOWN ITEMS
SUBTTL Network Management -- NMX Function Block Definition
;This is the NMX Interface Function Argument Block. Its purpose
;is to implement a standard calling interface between Network
;Management (NTMAN) and the DECnet Layers.
;Define Network management Functions Block
BEGSTR NF
WORD EID ;Entity ID
HWORD BYT ;Byte count
HWORD PRM ;Parameter Number
FIELD BFF,1 ;Buffer Flag
FIELD UBF,1 ;User Buffer passed (for return KNOWN NODES)
FIELD QUF,1 ;Qualifier Flag
FIELD ETY,6 ;Entity Type
FIELD SEL,9 ;Selector
HWORD BLN ;Buffer Length
WORD QUA ;Qualifier
WORD BUF ;Buffer Address or Parameter value
WORD BPT ;Byte pointer to data
ENDSTR
;Network management Function Codes
XP NF.ILG,-1 ;Illegal Function
XP NF.SET,0 ;Set Parameter
XP NF.CLR,1 ;Clear Parameter
XP NF.RED,2 ;Read Parameter
XP NF.COU,3 ;Show Counters
XP NF.SZC,4 ;Show and Zero Counters
XP NF.RET,5 ;Return list of Entity Ids
XP NF.A2N,6 ;Map Node Address to Name
XP NF.N2A,7 ;Map Node Name to Address
XP NF.CET,10 ;Check Entity
XP NF.CKL,11 ;Check Loopback Node
NF.MAX==NF.CKL ;Maximum Function code value
;Network Management Interface Error returns
;These error codes are for internal monitor use only
XP NF.FCS,^D1 ;Function completed successfully
XP NF.NDP,^D0 ;No data present
;The following error codes may be returned to the user level
XP NF.UFO,^D-1 ;Unrecognized Function or Option
XP NF.IMF,^D-2 ;Invalid Message Format
XP NF.PRV,^D-3 ;Privilege Violation
XP NF.MPE,^D-5 ;Management Program Error
XP NF.UPT,^D-6 ;Unrecognized Parameter Type
XP NF.URC,^D-8 ;Unrecognized Component
XP NF.INI,^D-9 ;Invalid Identification
XP NF.CWS,^D-11 ;Component in Wrong State
XP NF.RES,^D-15 ;Resource Error
XP NF.IPV,^D-16 ;Invalid Parameter Value
XP NF.NRM,^D-20 ;No room, or slot already taken
XP NF.PNA,^D-22 ;Parameter not applicable
XP NF.PVL,^D-23 ;Parameter value too long
XP NF.OPF,^D-25 ;Operation failure
XP NF.FNS,^D-26 ;Function not supported
XP NF.IPG,^D-27 ;Invalid Parameter grouping
XP NF.PAM,^D-29 ;Parameter missing
SUBTTL Network Management -- Event Parameters and Argument blocks
;Event Classes
XP .NCNML,0 ;NETWORK MGMT LAYER
XP .NCALP,1 ;APPLICATION LAYER
XP .NCSCT,2 ;SESSION CONTROL LAYER
XP .NCNSP,3 ;NETWORK SERVICES (NSP) LAYER
XP .NCRTR,4 ;ROUTER LAYER
XP .NCDLL,5 ;DATA LINK LAYER
XP .NCPLL,6 ;PHYSICAL LINK LAYER
; 7-31 ;RESERVED FOR COMMON CLASSES
; 32-63 ;RESERVED FOR RSTS
; 64-95 ;RESERVED FOR RSX
XP .NCLCG,^D96 ;TOPS-10/20 specific events
; 97-127 ;RESERVED FOR TOPS-10/20
; 128-159 ;RESERVED FOR RT
; 160-479 ;RESERVED FOR FUTURE DEC USE
; 480-511 ;RESERVED FOR CUSTOMER USE
;Event and signal queue maximum lengths
XP NMXELN,^D10 ;Maximum # of entries in event queue
XP NMXSLN,^D10 ;[7.1251] Maximum # of entries in signal queue
;Event communication block.
;
;The EC block is a communications area between a layer and NTMAN.
BEGSTR EC
;NTMAN private section
HWORD LOS ;Count of "events lost"
HWORD CNT ;Count of events on queue
FIELD DEL,1 ;This EC block marked for deallocation
FILLER 2
;Communications area, set by the layer
FIELD LAY,3 ;DECnet layer this EC block belongs to
HWORD ETY ;Entity type of DECnet device this EC block
; belongs to
WORD EID ;Entity ID of DECnet device this EC block
; belongs to
HWORD MAX ;Maximum # of events on queue allowed
ENDSTR
;Network event block
;
;A NE block contains all information about an event
BEGSTR NE
WORD NXT ;Pointer to next NE block on queue
WORD TIM ;Time of event
WORD CBK ;Address of callback routine
WORD ECP ;Pointer to event communications block
FIELD CCL,13 ;Event class
FIELD CTY,5 ;Event type
HWORD DLN ;Data length in bytes
HWORD ETP ;Entity type
WORD EID ;Entity ID
WORD DAT ;Fullword pointer to data string
ENDSTR
;Filter argument block
;
;Used to pass arguments to the EV.FIL function of NMXEVT
BEGSTR FA ;Filter argument block
HWORD CCL ;Event class
HWORD CTY ;Event type
ENDSTR
IFN FTDEBUG <
;For test and debug purposes there is an extra function of the NTMAN jsys.
;This function will log an event or signal.
;
;The function code is -5 (.NTTEV)
.NTTEV==:-5
;
;The entity ID and type for the event are taken from the standard words in
;the NTMAN argument block.
;
;Word .NTSEL points to a secondary argument block of the following layour
;
BEGSTR ET
FIELD SIG,1 ;Set if this is a signal
HWORD CNT ;Replication count
FIELD CCL,13 ;Event class
FIELD CTY,5 ;Event type
HWORD DLN ;Data length in bytes
WORD DAT,<44/4> ;Space for data
ENDSTR
>
SUBTTL Test Bed Stuff
;Here are the TRACE and ETRACE symbols.
XP TRCCOM,1B35 ;/TRACE:COM
XP TRCRTR,1B34 ;/TRACE:RTR
XP TRCNSP,1B33 ;/TRACE:NSP
XP TRCSC,1B32 ;/TRACE:SC
XP TRCUSR,1B31 ;/TRACE:USR
XP TRCNMX,1B30 ;/TRACE:NMX
XP ETRCOM,1B35 ;/ETRACE:COM
XP ETRRTR,1B34 ;/ETRACE:RTR
XP ETRNSP,1B33 ;/ETRACE:NSP
XP ETRSC,1B32 ;/ETRACE:SC
XP ETRUSR,1B31 ;/ETRACE:USR
XP ETRNMX,1B30 ;/ETRACE:NMX
;This is a macro for generating traces about things.
DEFINE TRACE(PREFIX,TEXT),<
IFN FTTRACE,<
EXT <S.TRAC,.TSTRG>
CALL [SAVEAC <T1,T2,T3,T4> ;;YES, SAVE SOME AC'S
HRRZ T1,S.TRAC ;;GET THE TRACE SWITCH
TXNN T1,TRC'PREFIX ;;IF HE WANTS IT, GIVE IT TO HIM
RET ;;RETURN TO SENDER
MOVEI T1,[ASCIZ/['PREFIX: 'TEXT]
/] ;;SET UP FOR SCAN .TSTRG
CALLSCAN .TSTRG ;;CALL HIM
RET] ;; AND RETURN
>;END OF IFN FTTRACE
>
DEFINE ETRACE(PREFIX,TEXT),<
IFN FTTRACE,<
EXT <S.ETRA,.TSTRG>
CALL [SAVEAC <T1,T2,T3,T4> ;;YES, SAVE SOME AC'S
HRRZ T1,S.ETRA ;;GET THE TRACE SWITCH
TXNN T1,ETR'PREFIX ;;IF HE WANTS IT, GIVE IT TO HIM
RET ;;RETURN TO SENDER
MOVEI T1,[ASCIZ/['PREFIX: 'TEXT]
/] ;;SET UP FOR SCAN .TSTRG
CALLSCAN .TSTRG ;;CALL HIM
RET] ;; AND RETURN
>;END OF IFN FTTRACE
>
SUBTTL FIXADJ Macro - Compensate for bug in negative ADJBP
;This macro should be removed if and when the KL microcode is fixed to
;handle byte pointers that have a 777777 in the right half and an index
;AC that points to the first address in a section. Such a byte pointer
;might be generated by backing up a byte pointer with an ADJBP instruction.
;For example, if the byte pointer is 41006,,777777 and AC 6 contains 10,,0
;the effective address calculation computes an address of 7,777777. If it
;is the case that section 7 is not mapped a page fault will result even if
;the instruction is an ILDB wishing to get its byte from 10,,0. This macro
;will change the byte pointer from 410xx,,-1 to 4410xx,,0.
DEFINE FIXADJ (ac),<
TLNE ac,700000 ;Is it 0410xx,,xxx?
IFSKP.
TLO ac,400000 ;Yes, make it 4410xx,,xxx
HRRI ac,1(ac) ;Non-carrying add to RH, TLO just made IFIW!
ENDIF.
>
DEFINE TSTS6 <>
;;Hack in test section 6
;DEFINE TSTS6 <
; IF2,<IFNDEF $TSTS6,<EXTERNAL $TSTS6>>
; JSP CX,$TSTS6
;>
SUBTTL End of D36PAR
END