Trailing-Edge
-
PDP-10 Archives
-
BB-M080O-SM
-
monitor-sources/latsrv.mac
There are 19 other files named latsrv.mac in the archive. Click here to see a list.
; *** Edit 7481 to LATSRV.MAC by MCCOLLUM on 15-May-87, for SPR #88
; At HMSTOP, release all circuit resources to prevent future LATNSC BUGINFs.
; *** Edit 7476 to LATSRV.MAC by WADDINGTON on 7-May-87
; Replace R with [RET] in 7468. This keeps LINK from trashing SLTDSP.
; *** Edit 7469 to LATSRV.MAC by LILJA on 29-Apr-87, for SPR #21257
; In CRECHK always grant 1 credit if this line has pause on character enabled.
; This will allow the unpause character to always be sent.
; *** Edit 7369 to LATSRV.MAC by MCCOLLUM on 25-Sep-86, for SPR #21256
; Add Ethernet address to additional data in LATNSC BUGINF.
; *** Edit 7346 to LATSRV.MAC by MCCOLLUM on 30-Jul-86
; Remove edit 7333. Bump MXSLSI back up 40 bytes.
; *** Edit 7333 to LATSRV.MAC by MCCOLLUM on 14-Jul-86, for SPR #21117
; Increase MXSLSI to 80 (decimal) so file trasnfers through DECSAs works.
; *** Edit 7295 to LATSRV.MAC by MCCOLLUM on 21-May-86, for SPR #21173
; Increase the field size of CBKAV from a half to a full word
; *** Edit 7275 to LATSRV.MAC by APPELLOF on 27-Mar-86
; Count credits that we extend in DATA_B slots. Fixes protocol errors and
; LATISTs talking to DECserver-100s
; *** Edit 7250 to LATSRV.MAC by MELOHN on 3-Mar-86, for SPR #21090
; Move MINACB to STG so that max number of LAT circuits can be customized by
; site
;------------------------- Autopatch Tape # 13 -------------------------
; *** Edit 7234 to LATSRV.MAC by PALMIERI on 27-Jan-86, for SPR #21077 (TCO 6.1.1572)
; CB not initialized if MAXIMUM ACTIVE CIRCUITS is exceeded.
; *** Edit 7231 to LATSRV.MAC by MELOHN on 27-Jan-86 (TCO 6.1.1571)
; Change CB index to SB index for data waiting flag in RELSB
;------------------------- Autopatch Tape # 12 -------------------------
; UPD ID= 2305, SNARK:<6.1.MONITOR>LATSRV.MAC.61, 31-Jul-85 15:23:24 by MELOHN
;TCO 6.1.1503 - Fix flow control to DECserver 100s.
; UPD ID= 2298, SNARK:<6.1.MONITOR>LATSRV.MAC.60, 16-Jul-85 17:20:36 by MELOHN
;TCO 6.1.1485 - set up correct reason code when stopping circuit after LATIST.
; UPD ID= 2296, SNARK:<6.1.MONITOR>LATSRV.MAC.59, 15-Jul-85 15:43:33 by MELOHN
;TCO 6.1.1484 - At HRUNCB, range check the CB index.
;TCO 6.1.1483 - Fix Zero Counters to zero the correct number of words.
; UPD ID= 2293, SNARK:<6.1.MONITOR>LATSRV.MAC.58, 10-Jul-85 16:52:18 by MELOHN
;TCO 6.1.1480 - Fix NTINF% routine to return the properly when no server name.
; UPD ID= 2288, SNARK:<6.1.MONITOR>LATSRV.MAC.57, 28-Jun-85 15:08:06 by PALMIERI
; TCO 6.1.1476 Save address of receive buffer at GETRBF in case the attempt to
;post it to NISRV fails because we will then free it.
; UPD ID= 2287, SNARK:<6.1.MONITOR>LATSRV.MAC.56, 28-Jun-85 14:28:15 by NICHOLS
;Fix typo in 2217 (Thanks, Carl Appellof)
; UPD ID= 2284, SNARK:<6.1.MONITOR>LATSRV.MAC.55, 26-Jun-85 18:14:43 by NICHOLS
;TCO 6.1.2297 - If we receive a stop slot for a zero dest, ignore rather
; than complaining about illegal slot. This bypasses a bug in LAT-11.
; UPD ID= 2217, SNARK:<6.1.MONITOR>LATSRV.MAC.54, 12-Jun-85 15:13:54 by MELOHN
;TCO 6.1.1445 - Correctly parse multiple slots in message at LSDMUX
;TCO 6.1.1431 - Fix MMVAZS to work with non-asciz strings.
; UPD ID= 2096, SNARK:<6.1.MONITOR>LATSRV.MAC.52, 3-Jun-85 14:52:19 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 2092, SNARK:<6.1.MONITOR>LATSRV.MAC.51, 3-Jun-85 14:48:58 by MELOHN
;More of last edit - fix off by one in bit flag sent to terminal.
; UPD ID= 2012, SNARK:<6.1.MONITOR>LATSRV.MAC.50, 24-May-85 16:04:29 by MELOHN
;TCO 6.1.1403 - Fix DATA_B slot formatting to send all XON/XOFF chars.
;TCO 6.1.1238 - Fix BUG. documentation
; UPD ID= 1660, SNARK:<6.1.MONITOR>LATSRV.MAC.49, 20-Mar-85 15:04:28 by MELOHN
;TCO 6.1.1280 - Reorder the CB BEGSTR so that correct info is returned by LATOP
; UPD ID= 1637, SNARK:<6.1.MONITOR>LATSRV.MAC.48, 14-Mar-85 15:36:41 by MELOHN
;TCO 6.1.1264 - Set the change flags when adding a new service to multi-cast.
; UPD ID= 1626, SNARK:<6.1.MONITOR>LATSRV.MAC.46, 12-Mar-85 19:02:38 by MELOHN
;TCO 6.1.1252 - Add LATIST buginf when received illegal slot in legal message.
;TCO 6.1.1251 - Make LATOP% defaults reasonable; fix host num to be set at INI.
;TCO 6.1.1250 - Make Retransmit timer use TODCLK instead of sched cycles.
; UPD ID= 1593, SNARK:<6.1.MONITOR>LATSRV.MAC.45, 5-Mar-85 23:05:26 by MELOHN
;TCO 6.1.1223 - Implement Host Keep Alive Timer 2 times server_keep_alive secs.
;TCO 6.1.1216 - HMSTOP - use local CB ID for received stop msgs instead of RID.
; UPD ID= 1540, SNARK:<6.1.MONITOR>LATSRV.MAC.44, 19-Feb-85 23:08:46 by MELOHN
;TCO 6.1.1214 - Fix Dynamic service ratings to be checked/updated at LATXMC.
; UPD ID= 1514, SNARK:<6.1.MONITOR>LATSRV.MAC.43, 13-Feb-85 01:32:59 by MELOHN
;TCO 6.1.1192 - there must be at least one offered service in multi-cast msg.
; don't allow users to clear the last offered service via LATOP%.
; UPD ID= 1507, SNARK:<6.1.MONITOR>LATSRV.MAC.42, 12-Feb-85 11:23:25 by MELOHN
; TCO 6.1.1191:
;always zero nslots at LAMUX so that we dont send bogus msgs to posideon -207-
; TCO 6.1.1190:
;don't send stop circuit when nslots becomes zero - server will stop it for us.
; UPD ID= 1380, SNARK:<6.1.MONITOR>LATSRV.MAC.41, 21-Jan-85 17:04:03 by MELOHN
;Change CHKXMC to check if KLNI is running before transmitting multicast.
; UPD ID= 1234, SNARK:<6.1.MONITOR>LATSRV.MAC.40, 20-Dec-84 19:54:21 by MELOHN
;Make a call to LATLSC during LATINI to make sure the KLNI is running so we
;don't exahust free space with multi-casts that are waiting to go out.
; UPD ID= 1207, SNARK:<6.1.MONITOR>LATSRV.MAC.39, 13-Dec-84 16:31:23 by MELOHN
;TCO 6.1.1088 - Fix HMSTRT to check for non-existent CB before calling LCLHLT.
; UPD ID= 1150, SNARK:<6.1.MONITOR>LATSRV.MAC.38, 5-Dec-84 10:25:57 by GLINDELL
;Add table of contents
; UPD ID= 1142, SNARK:<6.1.MONITOR>LATSRV.MAC.37, 3-Dec-84 17:29:48 by GLINDELL
;D36COM is now in XCDSEC
; UPD ID= 1089, SNARK:<6.1.MONITOR>LATSRV.MAC.36, 17-Nov-84 16:12:43 by MELOHN
;Initialize the Multi-Cast timer even if initial LAT state is off.
;Make LASDEF global so that it can be set via SMON%
; UPD ID= 952, SNARK:<6.1.MONITOR>LATSRV.MAC.34, 5-Nov-84 15:22:52 by WEISBACH
; Fix MTTSTP to behave correctly when the NI is not running.
; Always use temp xmit buffer. Always send message with UNUID of 0.
; Make MDLXBF loop through ALL buffers in ACK queue and unqueue them too.
; Remove XBFACK since work done in MDLXBF now.
; Fix XMTDON not to reference CB variables if there is no CB.
; Make RFXBFS return buffer header as well as buffer.
; Add entry point XMTMSN to XMTMSG routine to send a message
; which will not be ACKed.
; UPD ID= 939, SNARK:<6.1.MONITOR>LATSRV.MAC.33, 29-Oct-84 15:55:46 by WEISBACH
; Add check for wheel or operator capabilities to all functions which change
; the data base.
; Don't user XBLTUM since was conceived for BLT, not extended BLT. In fact
; XBLTMU does not work with XBLT.
; Lock data base when user in .LATOP% JSYS to permit only one user at a time.
; Put TMPBLK in PSECT NRVAR.
; UPD ID= 936, SNARK:<6.1.MONITOR>LATSRV.MAC.32, 29-Oct-84 01:38:16 by PRATT
;More TCO 6.1.1022 - Remove unnecessary ENDSV. in previous edit
; UPD ID= 929, SNARK:<6.1.MONITOR>LATSRV.MAC.31, 28-Oct-84 11:08:40 by PRATT
;TCO 6.1.1022 - Add code to return node name / number for NTINF
; UPD ID= 923, SNARK:<6.1.MONITOR>LATSRV.MAC.30, 24-Oct-84 15:51:47 by WEISBACH
; Length mismatch between PARTB. macro and block lengths forTBEXEC,TBRNGE,
; and TBFLGS. While at it, change defintions to exclude a parameter
; function code of 0.
; Put back line to store decremented timer in TMRCHK which accidentally
; got taken out.
; Correct length for info to return in routine LAS1C.
; Swap bits in group codes returned by the .LASCH LATOP% function.
; UPD ID= 908, SNARK:<6.1.MONITOR>LATSRV.MAC.29, 22-Oct-84 20:49:06 by WEISBACH
; Add .LASTC and SET/CLEAR for .LPCOD parameter.
; Fix TMRCHK, CBTIM not being reset properly when it expires but the
; retransmit limit not exceeded because routine returns before T1
; stored in CBTIM.
; UPD 846 moved check for last buffer too far. It must be done before
; the message header is build otherwise the RRF flag will never get set.
; If the LAT access state is off, refuse any incoming circuit connects
; (in routine HMSTRT)
; Change default group code to zero instead of 0-35
; HNCON counter not being maintained. Add the incrementing/decrementing/
; testing of HNCON.
; In LATXMC, testing for HN data base is not necessary since
; LATXMC never is called until initialization is successful and complete.
; Add call to routine CHKXMC to check if multicast should be transmitted.
; The default LAT access state must be set before any multicast formatting
; routines are called. UPD 823 move the two lines which did this too far
; into the initialization.
; In XSLDTB for DATA_B slots shift the credits returned from CRECHK to
; proper position. This should have been part of UPD 801.
; Change maximum circuits and connects in PARTB. macro to be their symbolic
; values CBMAXI & NTTLAH.
; UPD ID= 849, SNARK:<6.1.MONITOR>LATSRV.MAC.28, 4-Oct-84 16:59:36 by WEISBACH
; Remove LATOP% function .LPLOC since it is not used.
; UPD ID= 846, SNARK:<6.1.MONITOR>LATSRV.MAC.25, 2-Oct-84 13:44:18 by WEISBACH
; Remove symbols for LATOP% which are now in MONSYM.
; In the received message processing routines, change to release received
; buffer after returning from each routine. Buffer was not always being
; returned to DLL.
; IN HRUNCB, add defensive code for case that CBVECT entry is zero. Terminate
; circuit with "invalid run message" error.
; Call circuit stop routines (except LCLHLT) with JSP to record PC for
; BUGINF.
; The check for last transmit buffer in BLDMSL should be in MTTRUN.
; UPD ID= 835, SLICE:<6.1.MONITOR>LATSRV.MAC.24, 27-Sep-84 10:38:10 by WEISBACH
; Transmit buffers released at wrong place. Release after ACK'd rather
; than at transmit complete.
; UPD ID= 824, SLICE:<6.1.MONITOR>LATSRV.MAC.23, 25-Sep-84 09:34:39 by WEISBACH
; INFSTP should branch to MTTSTP, not MTTSTR
; UPD ID= 823, SLICE:<6.1.MONITOR>LATSRV.MAC.22, 24-Sep-84 18:40:00 by WEISBACH
; Put Reason Code for transmitting STOP messages into T1 correctly.
; In TMRCHK, Load T1 with value to reset timer after call to XUNAKQ, not
; before the call.
; Add BUGINF for cases where host stops the circuit to LAT server.
; Move initial setting of multicast timer in LATINI to the end of the
; initialization process to prevent any chance of LATXMC being called
; before initialization is complete.
; UPD ID= 801, SLICE:<6.1.MONITOR>LATSRV.MAC.21, 17-Sep-84 22:18:40 by WEISBACH
; In XSLDTA, fix again continuation from page stop. Error return from
; TTSND must adjust the slot count.
; CRECHK cannot update the remotes transmit credits since the message might
; not get sent (e.g. no transmit buffers). Change to update the remote's
; transmit credits only when it is definite that the message will be sent
; (at XSLDA2).
; UPD ID= 794, SNARK:<6.1.MONITOR>LATSRV.MAC.20, 10-Sep-84 19:24:35 by WEISBACH
; Mix SL.DXF, SL.EXF to violate the LAT spec the same way VMS does. Should
; use the input XON/XOFF character recognition but other implementations
; mistakenly used the output character recognition. In the spec, "input"
; or "output" here refers to the stream in which the XON/XOFF characters are
; put, not the stream which is turned on or off.
; Fix continuation from page stop. Since TTSND returns non-skip if at page
; stop, must check for this early otherwise might increment remote's
; credits (CRECHK) but not send the slot.
; Add call to GETRBF in LATXMC in case it is necessary to post additional
; to the data link.
; CBDACT should clear CBRID, not CBLID.
; Correct the lenght requested for the HN block in LATINI.
; CLRNID does not zero the identification count properly: SETZRO wrong.
; LCP clear command does not set the change flags properly because tag
; LASET0 is at the wrong place.
; BMCRAT sets of wrong byte pointer to node name. Off by one byte.
; SSERVC clears wrong AC for assembling the change flags. Should clear
; P4 instead of T4
; UPD ID= 759, SNARK:<6.1.MONITOR>LATSRV.MAC.19, 27-Aug-84 14:49:47 by WEISBACH
; FNDSRV sets up one word global pointer wrong.
; GCBNAM does not loop thru circuit blocks properly because the pointer
; to the user's service name is destroyed by SCMPTR. Make SCMPTR preserve
; Tn ACs.
; In LATINI, T4 cannot be used as the base register to the service call
; accross a call to MMVAZS. Replace T4 with W1.
; Replace all lengths of blocks in BEGSTR definitions with literals
; Replace SNMMAX and SLOMAX with ML.SYS and ML.LOC
; UPD ID= 746, SNARK:<6.1.MONITOR>LATSRV.MAC.18, 20-Aug-84 17:40:01 by WEISBACH
; Fix sendall by including the sendall buffer count in the output character
; count for routine XSLDTA. Create subroutine GTCHCT to compute the correct
; count.
; Set change flags for clearing of a service (CSERVC).
; Fix setting of change bits in SSERVC. Replace a STKVAR variable in
; same routine with an AC.
; Move the setting of the byte pointer UNBFA for the multicast message
; from initialization code to SENDMC so it gets set up each time since
; it will be changed when the multicast message is rebuilt.
; UPD ID= 731, SNARK:<6.1.MONITOR>LATSRV.MAC.17, 8-Aug-84 13:22:49 by WEISBACH
; In RELSB, don't call TTYDE0 if there is a controlling job for the
; terminal otherwise JOBCOF code will do it again and cause a
; TTNAC7 BUGCHK.
; UPD ID= 729, SNARK:<6.1.MONITOR>LATSRV.MAC.16, 6-Aug-84 17:35:23 by WEISBACH
; Clear the local slot block ID in routine XSLSTP before transmitting the
; stop slot. Create a new routine RLSBID to do this.
; BUGCHK in LATCBR only for NISRV callback function codes which are out of
; range.
; In IGNSLT, set SLTCNT to zero so slot data is truly ignored.
; XSLDTA decrements the transmit credits too soon in the case of page
; stop. Move the decrement to after the XSLDA1 loop.
; Fix incarnation count so random number used properly at initialization.
; Set description field length back to ^D64
; UPD ID= 695, SNARK:<6.1.MONITOR>LATSRV.MAC.15, 19-Jul-84 18:13:30 by WEISBACH
; CC.LST, not CC.LEN, is the length to use when allocating storage for a CB!!
; UPD ID= 694, SNARK:<6.1.MONITOR>LATSRV.MAC.14, 18-Jul-84 18:15:19 by WEISBACH
; Drop node description field length back to ^D16.
; UPD ID= 690, SNARK:<6.1.MONITOR>LATSRV.MAC.13, 17-Jul-84 10:20:42 by WEISBACH
; Some LASCH and LASCO bug fixes.
; Add setting of change flags for service rating or description change.
; This must be done in SSERVC rather than in LASET.
; Length of GBHID field of GB BEGSTR should be 13., not 16.
; Raise node description field length maximum in multicast msg to ^D64
; Not enough memory requested for circuit blocks
; UPD ID= 633, SNARK:<6.1.MONITOR>LATSRV.MAC.12, 19-Jun-84 05:56:03 by WEISBACH
; LTSOF must be global.
; UPD ID= 631, SNARK:<6.1.MONITOR>LATSRV.MAC.11, 18-Jun-84 14:00:33 by WEISBACH
; Add LATOP% JSYS
; Halt all circuits when NI goes away.
; In CRECHK, force fork wakeup if the remote has used up all credits and
; we cannot give him more until he reads the input.
; In RELSB, release the TDB after doing the carrier loss action.
; After a slot session is rejected, release the slot.
; Save the circuit stop reason properly in MTTSTP.
; Save the circuit's remote ID properly for MTTSTP when a CB exists.
; In CBINIT, clear CBFLG and CBSDC. Change to to a BLT for the clear.
; Fix RELSB to return right value in SB so that slot mux can continue
; properly.
; Clear TTPRM before calling NTYCOF so don't have to clobber W1 by using
; is as a save register.
; In BSLTHD, T2 cannot be used to save register because LAP2B0 clobbers it.
; In CBDACT, T2 is not preserved by LAUNQ so don't assume it.
; Fix CMNIAD. Its comparison of NI address never worked right.
; Terminate a circuit if the number of slots active goes to zero.
; In XSLSTP, release the slot (call RELSB).
; Make LAP2Bx preserve the caller's T1.
; Let LTHNGU do something -- kill the slot associated with the terminal.
; Add device dependent routine for specifying LAT terminals as high speed
; output terminal.
; Fix RANDOM.
; UPD ID= 590, SNARK:<6.1.MONITOR>LATSRV.MAC.10, 1-Jun-84 18:02:02 by WEISBACH
; Turn off interrupts earlier in LTSSDC so that scheduler level does not
; take out the slot block from under process level if the LAT session
; gets disconnected with output in progress.
; UPD ID= 588, SNARK:<6.1.MONITOR>LATSRV.MAC.9, 1-Jun-84 10:52:57 by WEISBACH
; Change maximum slot size MXSLSI to 40 decimal to correspond to 9600
; baud input assuming two credits.
; One too may bytes in START message. NBR_DL_BUFS entered twice.
; UPD ID= 577, SNARK:<6.1.MONITOR>LATSRV.MAC.8, 29-May-84 14:52:19 by WEISBACH
;If the output TTY buffer count (TTOCT) is zero, always clear TTOTP
; when exiting routine XSLDTA.
;Fix method of determining the start of next slot in a multi-slot message
; when slot lengths not a multiple of 2.
;Use the new host multicast address.
; UPD ID= 564, SNARK:<6.1.MONITOR>LATSRV.MAC.7, 24-May-84 16:07:34 by WEISBACH
;Fix transmissions - transmit loop never terminated.
; UPD ID= 560, SNARK:<6.1.MONITOR>LATSRV.MAC.6, 24-May-84 15:03:25 by WEISBACH
;Add fairness to slot block processing in routine BLDMSL.
;On occurence of errors from NISRV, re-post receive buffers to NISRV in
;scheduler cycle instead of at NI interrupt level. Also save NISRV's T3.
; UPD ID= 535, SNARK:<6.1.MONITOR>LATSRV.MAC.5, 21-May-84 14:04:19 by WEISBACH
;Fix GTCSTR so that it will skip over a string properly is it is not be
; be copied (count to move equals 0).
;In the SBFLG word, reverse to order of SBOUT and SBFOU so that output is
; always flushed before new data is sent.
;Rearrange the CB BEGSTR, getting rid of the SM BEGSTR by incorporating it
; directly into CB.
; UPD ID= 524, SNARK:<6.1.MONITOR>LATSRV.MAC.4, 17-May-84 23:47:29 by WEISBACH
;Clear RRF in LAMUX at start. Set RRF when transmitting last buffer.
;Store back adjusted byte pointer in HSDATB and IGNSLT.
;Fix in HDRDAT the skip around two instructions.
;Ensure that slots start on an even byte boundary and make sure we expect
; received slots to start on an even boundary.
;Correct the size required for transmit and receive buffers.
;In MMGTZW, call DNGWDZ, not DNGWDS.
;In BMCFXD set the preferred server circuit timer to be 80 ms because of
; a server bug which does not allow 0.
;In routine HSDATA, TTCHI has a skip return; it also preserves T2 so take
; setting of T2 outside the loop.
;Change all jumps to R to be jumps to RTN for benefit of TOPS-10
; UPD ID= 507, SNARK:<6.1.MONITOR>LATSRV.MAC.3, 7-May-84 14:10:04 by WEISBACH
;First Version
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
;OR COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1976, 1985.
;ALL RIGHTS RESERVED.
SEARCH MACSYM,MONSYM,PROLOG,TTYDEF
SEARCH NIPAR
SALL
TTITLE (LATSRV,,< -- LAT-20 Terminal Host>)
SUBTTL Table of Contents
; Table of Contents for LATSRV
;
;
; Section Page
; 1. Definitions - Literals - Circuit Parameters. . . . . . 3
; 2. Definitions - Literals - Slot Parameters . . . . . . . 4
; 3. External References. . . . . . . . . . . . . . . . . . 5
; 4. Definitions - Data Structures. . . . . . . . . . . . . 7
; 5. CIRCUIT BLOCK data structure definitions . . . . . . . 8
; 6. SLOT BLOCK data struction definitions. . . . . . . . . 10
; 7. Miscellaneous Structure Definitions. . . . . . . . . . 11
; 8. Symbol Definitions
; 8.1. Macros MIN.,MAX.,MAXENT . . . . . . . . . . . 12
; 9. LATOP% JSYS
; 9.1. Definitions . . . . . . . . . . . . . . . . . 13
; 9.2. Entry point . . . . . . . . . . . . . . . . . 15
; 9.3. SET/CLEAR Functions . . . . . . . . . . . . . 16
; 9.4. SET/CLEAR SERVICE . . . . . . . . . . . . . . 17
; 9.5. SET LAT HOST NAME . . . . . . . . . . . . . . 19
; 9.6. SET/CLEAR HOST IDENTIFICATION STRING. . . . . 20
; 9.7. SET/CLEAR HOST GROUP CODES. . . . . . . . . . 21
; 9.8. SET MAXIMUM CIRCUITS. . . . . . . . . . . . . 22
; 9.9. SHOW CHARACTERISTIC HOST. . . . . . . . . . . 24
; 9.10. SHOW TERMINAL CONNECTS. . . . . . . . . . . . 26
; 9.11. SHOW SERVERS. . . . . . . . . . . . . . . . . 27
; 9.12. SHOW/ZERO COUNTERS. . . . . . . . . . . . . . 28
; 9.13. Utility Routines
; 9.13.1. FNDSRV . . . . . . . . . . . . . . . 29
; 9.13.2. GTSRVR . . . . . . . . . . . . . . . 30
; 9.13.3. SCMPAR String Compare. . . . . . . . 31
; 10. LATINI - LAT Initialization. . . . . . . . . . . . . . 33
; 11. Multicast Transmitter. . . . . . . . . . . . . . . . . 36
; 12. Routines to Build the Host Multicast Message
; 12.1. BMCFXD. . . . . . . . . . . . . . . . . . . . 37
; 12.2. BMCFXD. . . . . . . . . . . . . . . . . . . . 38
; 12.3. BMCNID. . . . . . . . . . . . . . . . . . . . 39
; 12.4. BMCSRV. . . . . . . . . . . . . . . . . . . . 40
; 12.5. BMCRAT. . . . . . . . . . . . . . . . . . . . 41
; 13. Multicast Transmit Check Routine . . . . . . . . . . . 42
; 14. Build the START Message Template . . . . . . . . . . . 43
; 15. LAINTR
; 15.1. LAT DLL Callback Routinea . . . . . . . . . . 44
; 15.2. Interrupt Level Virtual Circuit Message Receiver 45
; 16. LAINTX - Interrupt Level Virtual Circuit Message Receiver 46
; 17. LARSCH - Scheduler Level Virtual Circuit Message Receiver 47
; 18. LATLSC - Ethernet Link State Change Callback . . . . . 49
; 19. Message Receiver - HMSTRT. . . . . . . . . . . . . . . 50
; 20. HSTRCB . . . . . . . . . . . . . . . . . . . . . . . . 51
; 21. CBINIT - Circuit Block Initialization. . . . . . . . . 52
; 22. CMNIAD - Find CB base on NI address. . . . . . . . . . 53
; 23. HMRUN. . . . . . . . . . . . . . . . . . . . . . . . . 55
; 24. HSTRCB . . . . . . . . . . . . . . . . . . . . . . . . 56
; 25. HMSTOP . . . . . . . . . . . . . . . . . . . . . . . . 57
; 26. Message Transmit Routines. . . . . . . . . . . . . . . 59
; 27. Message Transmitter
; 27.1. XMTMSG. . . . . . . . . . . . . . . . . . . . 67
; 27.2. XMTDON. . . . . . . . . . . . . . . . . . . . 68
; 28. Receive Message Handling Routines. . . . . . . . . . . 69
; 29. Transmit Message Handling Routines . . . . . . . . . . 70
; 30. Slot Demultiplexor - LSDMUX. . . . . . . . . . . . . . 72
; 31. HSSTRT . . . . . . . . . . . . . . . . . . . . . . . . 73
; 32. Slot Processing Routines
; 32.1. STOP Slots. . . . . . . . . . . . . . . . . . 74
; 32.2. DATA_A,DATA_B Slots . . . . . . . . . . . . . 75
; 33. Slot Block Allocation and Deallocation Routines. . . . 77
; 34. Slot Multiplexor - Main Loop . . . . . . . . . . . . . 83
; 35. BLDMSL . . . . . . . . . . . . . . . . . . . . . . . . 85
; 36. Slot Formatting Routines
; 36.1. XSLSTA. . . . . . . . . . . . . . . . . . . . 87
; 36.2. XSLSTP. . . . . . . . . . . . . . . . . . . . 88
; 36.3. XSLDTA. . . . . . . . . . . . . . . . . . . . 89
; 36.4. XSLDTB. . . . . . . . . . . . . . . . . . . . 91
; 37. Queue Handling Routines. . . . . . . . . . . . . . . . 94
; 38. Buffer Handling Routines
; 38.1. Transmit Buffers. . . . . . . . . . . . . . . 96
; 38.2. Receive Buffers . . . . . . . . . . . . . . . 100
; 39. TTYSRV DEVICE DEPENDENT ROUTINES . . . . . . . . . . . 101
; 40. General Untility Routines. . . . . . . . . . . . . . . 102
SUBTTL Definitions - Literals - Circuit Parameters
;
;LAT Virtual Circuit Message Types
;
MT.RUN==0 ;RUN message
MT.STA==1 ;START message
MT.STP==2 ;STOP message
MT.MCA==^D10 ;Multicast message
;LAT Virtual Circuit States
;
CS.HLT==0 ;HALTED
CS.STA==1 ;STARTING
CS.RUN==2 ;RUNNING
CS.TRN==-1 ;In transition between HALTED and STARTING
;
;Circuit STOP message reason codes
;
CE.NSL==1 ;No slots connected on circuit
CE.ILL==2 ;Illegal message or slot format
CE.HLT==3 ;Circuit halted by local system
CE.NPM==4 ;No progress being made
CE.TIM==5 ;Time limit expired
CE.LIM==6 ;Retransmit limit exceeded
CE.RES==7 ;Insufficient resources
CE.STO==10 ;Server circuit timer out of range
CE.SKW==11 ;Protocol version skew
CE.INV==12 ;Invalid Message
;Circuit STOP reason codes of local significance only
CE.NIH==200 ;Local NI halted
MMHDSI==^D8 ;Minimum Message Header Size
MSTMSI==^D16 ;Minimum START Message Size(excluding header)
SUBTTL Definitions - Literals - Slot Parameters
;
;LAT Slot Types
;
ST.DTA==0 ;DATA_A slot
ST.STA==11 ;START slot
ST.DTB==12 ;DATA_B slot
ST.ATT==13 ;ATTENTION slot
ST.REJ==14 ;REJECT slot
ST.STP==15 ;STOP slot
;
;LAT Slot States
;
SS.HLT==0 ;Halted
SS.RUN==1 ;Running
;
; SLOT Reject and Stop Reason Codes
;
SE.USR==1 ;User requested disconnect
SE.SHU==2 ;System shutdown in progress
SE.ISR==3 ;Invalid slot received
SE.SER==4 ;Invalid service class
SE.RES==5 ;Insufficient resources available
;
; DATA_B Slot Control Flag Bit Definitions
;
SL.EXF==5 ;Enable XON/XOFF recognition in server
SL.DXF==11 ;Disable XON/XOFF recognition in server
;
; SLOT Size Definitions
;
SLHDSI==4 ;Slot header size
ATTSIZ==SLHDSI ;ATTENTSION slot size
DTBSIZ==SLHDSI+5 ;DATA_B slot size
NIPIA==DLSCHN ;Priority Interrupt Assignment for KLNI
;
;Miscellaneous Constants
;
LAHPV==5 ;Highest protocol version supported
LALPV==5 ;Lowest protocol version supported
PROVER==5 ;Our LAT protocol version
PROECO==0 ;Our LAT protocol ECO
;**; [7346] Change one line at MXSLSI== + 0 L JDM 14-Jul-86
MXSLSI==^D40 ;[7346]Maximum slot size we will receive
MXSLTS==^D64 ;Maximum slot sessions per circuit
LMRFSI==^D1504 ;Receive buffer size
MXHSRV==10 ;Maximum number of services offered
LHPRID==6 ;Product code type for TOPS-20 host
SCITTY==1 ;Interactive terminal service class
MAXXBF==2 ;Maximum number of transmit buffers/circuit
CBMAXI==255 ;Absolute maximum circuit id
;**;[7250] Remove 1 Line at Misc Constants WCM 28-FEB-86
SLHDSZ==4 ;Slot header size (bytes)
MAXCRE==2 ;Maximum number of credits to extend to remote.
MXBALC==6 ;Number of ticks to wait before sending
; unsolicited message to server
DLL.FL==400000 ;"buffer-in-DLL" flag (in UNUID)
MINXBF==^D46 ;Minimum transmit buffer size
; UN Block Extension
BEGSTR UE
WORD LW0 ;Queue Link Word for linking buffers to CB Qs
WORD LW1 ;Queue Link Word for linking buffers to NI Qs
ENDSTR
;
; Buffer offsets
;
UNB.OF==UE.LEN ;Start of UN block for all buffers
MDB.OF==UE.LEN+UN.LEN ;Start of MD block
XBF.OF==UE.LEN+UN.LEN+MD.LEN
SBF.OF==UE.LEN+UN.LEN
SZMSTP==<XBF.OF+SZ.MHD+1>;STOP message size in words
SZ.SHD==4 ;Slot header size
SZ.ATT==1 ;Attention size
SZ.REJ==0 ;Reject slot size
SZ.SDB==5 ;DATA_B slot size
SZ.SSP==0 ;Stop slot size
SZ.SST==6 ;Start slot size
SZ.XBF==<^D1500+3>/4
SZ.MSP==^D10 ;Start message size
SZ.MHD==^D8 ;Message header size
ML.NNM==6 ;Max length of node name
ML.SYS==^D16 ;Max length of system name
ML.LOC==^D64 ;Max length of location field
ML.DSC==^D64 ;Max length of description field
ML.SNM==^D16 ;Max length of service name
ML.SID==^D64 ;Max length of service identification field
ML.SLN==^D16 ;Max length of slot name
ML.HMC==^D33+<1+ML.NNM>+<1+ML.DSC>+MXHSRV*<1+ML.SNM+1+ML.SID>+2
;Host multicast message max length
ML.HSM==^D12+<1+ML.NNM>+<1+ML.LOC>+<1+ML.SYS>+1
;Host start message max length
SUBTTL Definitions - Data Structures
;
;Host Node Data Structures
;
BEGSTR GB ;SERVICE BLOCK
WORD RAT ;Service Rating.
HWORD NC ;Count of bytes in service name.
HWORD LC ;Count of bytes in service description
WORD NAM,<<ML.SNM+4>/5> ;Storage for up to 16 bytes of service name.
WORD HID,<<ML.SID+4>/5> ;Storage for up to 64 bytes of service id.
ENDSTR
BEGSTR HN ;HOST NODE Data Base
FIELD FLG,^D18
BIT RUN ;NI run state
BIT ANY ;Reconstruct of START msg necessary
BIT CIP ;Virtual circuit connect in progress
FILLER ^D10
FIELD CFL,^D8 ;Multicast message change flags
BIT OTH ;Something other than above changed
BIT FIL
BIT CLS ;A host service class changed
BIT SVD ;A host service description changed
BIT SVR ;A host service rating changed
BIT SVN ;A host service name changed
BIT NDD ;Host Node Description changed
BIT ACS ;Access Codes changed
;START OF PARAMETERS DISPLAYED BY .LASCH
HWORD MXC ;Maximum allocatable circuit blocks
HWORD NCC ;Number of currently allocated circuit blocks
HWORD MAC ;Maximum number of active circuits
HWORD NAC ;Number of currently active circuits
HWORD MCO ;Maximum number of simultaneous connects
HWORD CON ;Current number of active connects
HWORD NUM ;Host number
HWORD LAS ;LAT access state
HWORD RLI ;Virtual circuit message retransmit limit
HWORD TIM ;Virtual circuit timer initial value (ms)
HWORD MTI ;Multicast timer initial value (sec)
; END OF PARAMETERS DISPLAYED BY .LASCH
HWORD RAT ;Host node dynamic rating
HWORD PRG ;Host progress timer
HWORD NRB ;Number of receive buffers allocated
WORD HST ;Address of state table
WORD QAC,2 ;Queue header for active circuit blocks
WORD QIC,2 ;Queue header for inactive circuit blocks
WORD NIQ,2 ;Interrupt level message queue
WORD SCQ,2 ;Scheduler level message queue
WORD PID ;NI Portal ID
HWORD NXI ;Next circuit block index to assign
HWORD NSV ;Number of offered services
WORD LOK ;Lock for HN data base
HWORD NMC ;Host node name count
HWORD IDC ;Host identification string count
WORD NAM,2 ;Host node name string
WORD ID,<<ML.DSC+4>/5> ;Host identification string
WORD SMT,<<<ML.HSM+3>/4>+SBF.OF>;Start message template
WORD MCM,<<ML.HMC+3>/4> ;Copy of the multicast message.
WORD SRV,<GB.LEN*MXHSRV>;Storage for service blocks
ENDSTR
BEGSTR AC,HN.LST ;ACCESS CODES
WORD LNG ;Access code string length in bytes
WORD COD,^D32 ;Storage for 256 bit bit-mask
ENDSTR
;LAT Circuit counters for all servers
BEGSTR HC,AC.LST
WORD RCV ;Messages received
WORD XMT ;Messages transmitted
WORD RTR ;Messages retransmitted
WORD SEQ ;Receive message sequence errors
WORD IMR ;Illegal messages received
WORD ISR ;Illegal slots received
WORD RES ;Resource errors
WORD MSK ;Illegal message error mask
ENDSTR
SUBTTL CIRCUIT BLOCK data structure definitions
BEGSTR CB ;CIRCUIT BLOCK
WORD LNK,2 ;Queue Link words (must be first words)
HWORD RID ;Circuit handle assigned by the remote
HWORD LID ;Local circuit index
FIELD FLG,3 ;Virtual circuit flags
BIT RRF ;Reply requested flag
BIT MRS ;Must reply soon flag
BIT MRN ;Must reply now flag
HWORD CSB ;Count since balanced
HWORD SDC ;Number of slots with data waiting
HWORD TSQ ;Next transmit sequence number
HWORD RSQ ;Next expected receive sequence number
HWORD LRA ;Sequence number of last message ack'd by remote node.
WORD TIM ;Current value of circuit timer.
HWORD RTC ;Current retransmit count
;**; [7295] Replace 1 line at BEGSTR CB + 15. L JDM 21-May-86
WORD KAV ;[7295]2*Server Keep-alive-timer in ms.
WORD KAT ;TODCLK last time message receieved from server
HWORD QUA ;Circuit quality
HWORD ERR ;Reason code for last time circuit stopped
HWORD DLL ;Number of transmit buffers in the DLL
WORD XBQ,2 ;Queue of free transmit buffers
WORD AKQ,2 ;Unacknowledged queue header
WORD SBQ,2 ;Circuit slot queue
;
;The following are returned as part of the LATOP Get Server information info.
;
WORD DNI,2 ;NI address of remote server
HWORD MTF ;Maximum transmit frame size for circuit
HWORD RPV ;Remote protocol version and ECO
HWORD MSL ;Maximum slots allowed by remote
HWORD NBF ;Additional transmit buffers allowed by remote
HWORD CTI ;Value of remote's circuit timer
HWORD KTI ;Value of remote's keep-alive timer
HWORD PTC ;Product type code for remote node
HWORD STA ;Virtual circuit state
HWORD NUM ;Remote's system number
HWORD RSC ;Remote's system name count
HWORD RLC ;Remote's location text count
WORD SNM,<<ML.SNM+4>/5> ;Remote's system name
WORD LOC,<<ML.LOC+4>/5> ;Remote's location string
ENDSTR
BEGSTR CC,CB.LST ;CIRCUIT COUNTERS
WORD RCV ;Messages received
WORD XMT ;Messages transmitted
WORD RTR ;Messages retransmitted
WORD SEQ ;Receive message sequence errors
WORD IMR ;Illegal messages received
WORD ISR ;Illegal slots received
WORD RES ;Resource errors
WORD MSK ;Illegal message error mask
ENDSTR
; Boundary definitions in the CB for CLEAR and SHOW
; LAT Control Program functions.
CLRBEG==CB.FLG ;First clear field for .LACLR
CLREND==CB.DLL ;End of clear field for .LACLR
SASBEG==CB.DNI ;Start of .LASAS fields for single server
SASBG==CB.STA ;Start of .LASAS fields for multiple servers
SASEN==CB.SNM+<ML.SYS+4>/5 ;End of .LASAS fields for single server
SASEND==CB.LOC+<ML.LOC+4>/5 ;End of .LASAS fields for multiple servers
SUBTTL SLOT BLOCK data struction definitions
BEGSTR SB
WORD LNK,2 ;Queue link word (must be first)
FIELD FLG,^D18 ;Flags
BIT SDP ;Slot data present (must be sign bit)
BIT REJ ;Send REJECT Slot
BIT STR ;Send START Slot
BIT FOU ;Flush output
BIT OUT ;Output data available
BIT FCC ;Flow control change
BIT STO ;Send STOP Slot(Must be last)
HWORD ATS ;Maximum attention slot size
HWORD MDS ;Maximum slot data size
HWORD STA ;Slot state
HWORD RID ;Remote slot id
HWORD LID ;Local slot id
HWORD XCR ;Transmit credits available to us
HWORD RCR ;Receive credits still outstanding
HWORD REA ;Reason code for stop or reject
HWORD SNC ;Source slot name count
WORD SNM,<<ML.SLN+4>/5> ;Source slot name (16 characters max)
WORD TDB ;Terminal data block
WORD CBA ;Circuit block address for this slot
ENDSTR
SUBTTL Miscellaneous Structure Definitions
BEGSTR QL ;Halfword Queue Link Word
WORD FWD ;Next forward queue element
WORD BWD ;Previous backward queue element
ENDSTR
SUBTTL External References
EXT DNGWDZ
EXT DNFWDS
EXT DLLUNI
EXT TTCHI
EXT LATMCT ;CLK2TM table timer for multicast
;**;[7250]Add 1 line at External Refs+4 WCM 28-FEB-86
EXT MINACB ;[7250]Max number of allocatable circuits
RESDT
LAHNDB: BLOCK 1
CBVECT: BLOCK 1
SBVECT: BLOCK 1
LASDEF:: EXP LS.ON ;LAT Access Default State
NSLOTS: BLOCK 1
SUBTTL Symbol Definitions -- Macros MIN.,MAX.,MAXENT
;
; Macro MIN. (symbol,list) - Assigns minimum arithmetic value of list of items.
;
DEFINE MIN. (SYM,LIST),
<IRP LIST,<..X==LIST ;;Assign first value in list
STOPI>
IRP LIST,<IFL <LIST-..X>,<..X==LIST>> ;;Assign lowest in list
SYM==:..X> ;;Generate value
;
; Macro MAX. (symbol,list) - Assigns maximum arithmetic value of list of items.
;
DEFINE MAX. (SYM,LIST),
<IRP LIST,<..X==LIST ;;Assign first value in list
STOPI>
IRP LIST,<IFG <LIST-..X>,<..X==LIST>> ;;Assign highest in list
SYM==:..X> ;;Generate value
DEFINE LHDSP. (TABLE,CODE,ROUTINE) <
.ORG <TABLE+CODE>
IFIW ROUTINE
.ORG>
DEFINE LSLDT. (DTBL,LTBL,CODE,ROUTINE,LNGTST,LNGADD) <
.ORG <DTBL+CODE>
IFIW ROUTINE
.ORG
.ORG <LTBL+CODE>
EXP <LNGTST,,LNGADD>
.ORG>
DEFINE PARTB. (PRM,MAX,MIN,CLRVAL,INSTR,FLAGS) <
.ORG <.LP'PRM+TBRNGE-1>
EXP <MAX,,MIN>
.ORG
.ORG <.LP'PRM+TBFLGS-1>
EXP <FLAGS!CLRVAL>
.ORG
.ORG <.LP'PRM+TBEXEC-1>
IFB <INSTR>,<
STOR T2,HN'PRM,(Q2)
>
IFNB <INSTR>,<
INSTR
>
.ORG
>
SUBTTL LATOP% JSYS -- Definitions
LF%RNG==1B1 ;Do range check on parameter value to set
LF%LOK==1B2 ;Lock the database before setting parameter
LF%CLR==1B3 ;Parameter may be cleared.
MAX. (MXSPAR,<.LPMAC,.LPMCO,.LPNUM,.LPLAS,.LPRLI,.LPTIM,.LPMTI,.LPCOD,.LPNNM,.LPNID,.LPSRV>)
MIN. (MNSPAR,<.LPMAC,.LPMCO,.LPNUM,.LPLAS,.LPRLI,.LPTIM,.LPMTI,.LPCOD,.LPNNM,.LPNID,.LPSRV>)
MAX. (TMPLNG,<<GB.LEN+1>,ML.NNM,ML.DSC>)
NR (TMPBLK, TMPLNG)
TMPGB==TMPBLK+1
SWAPCD
TBRNGE: BLOCK <MXSPAR-MNSPAR+1>
TBFLGS: BLOCK <MXSPAR-MNSPAR+1>
TBEXEC: BLOCK <MXSPAR-MNSPAR+1>
PARTB. (MAC,CBMAXI,1,^D10,,LF%RNG!LF%CLR)
PARTB. (MCO,NTTLAH,1,NTTLAH,,LF%RNG!LF%CLR)
PARTB. (NUM,177777,0,RTRADR,,LF%RNG!LF%CLR)
PARTB. (LAS,LS.ON,LS.OFF,0,,LF%RNG!<HNOTH_^D18>)
PARTB. (RLI,100,0,^D30,,LF%RNG!LF%CLR)
PARTB. (TIM,^D100000,^D100,^D1000,,LF%RNG!LF%CLR)
PARTB. (MTI,60,10,^D30,,LF%RNG!LF%CLR!<HNOTH_^D18>)
PARTB. (COD,0,0,0,<JRST SETCOD>,LF%CLR!<HNACS_^D18>)
PARTB. (NNM,0,0,0,<JRST SETNNM>,0)
PARTB. (NID,0,0,0,<JRST SETNID>,LF%CLR!<HNNDD_^D18>)
PARTB. (SRV,0,0,0,<JRST SSERVC>,LF%CLR)
SUBTTL LATOP% JSYS -- Entry point
.LATOP::MCENT
SKIPN Q2,LAHNDB ;If there is no data base,
ITERR (LATX03) ; then LAT is not operational
UMOVE Q1,1 ;Get the argument block address from user
UMOVE P1,.LAACT(Q1) ;Count of the argument block
UMOVE P2,.LAFCN(Q1) ;LAT function code.
CAIL P2,MNLFCN ;Range check the function code
CAILE P2,MXLFCN ; ...
ITERR (ARGX02) ;Function code out of range
NOINT ;Don't allow PSI while owning lock
LOCK HN.LOK(Q2) ;Get the lock
CALL @LAFDSP-MNLFCN(P2) ;Dispatch to perform the function
JRST [ UNLOCK HN.LOK(Q2);Release data base lock
OKINT ; and allow interrupts
ITERR ()] ;Error already reported
UNLOCK HN.LOK(Q2) ;Release data base lock
OKINT ; and allow interrupts
MRETNG ;Return to user
MIN. (MNLFCN,<.LASET,.LACLR,.LASCH,.LASTC,.LASAS,.LASCO,.LAZCO>)
MAX. (MXLFCN,<.LASET,.LACLR,.LASCH,.LASTC,.LASAS,.LASCO,.LAZCO>)
LAFDSP: BLOCK <MXLFCN-MNLFCN+1>
LHDSP. (LAFDSP,.LASET-MNLFCN,LASET) ;Set
LHDSP. (LAFDSP,.LACLR-MNLFCN,LACLR) ;Clear
LHDSP. (LAFDSP,.LASCH-MNLFCN,LASCH) ;Show characteristics of host
LHDSP. (LAFDSP,.LASTC-MNLFCN,LASTC) ;Show terminal connects
LHDSP. (LAFDSP,.LASAS-MNLFCN,LASAS) ;Show adjacent servers
LHDSP. (LAFDSP,.LASCO-MNLFCN,LASCO) ;Show counters
LHDSP. (LAFDSP,.LAZCO-MNLFCN,LAZCO) ;Zero counters
SUBTTL LATOP% JSYS -- SET/CLEAR Functions
;LASET/LACLR - Set/Clear LAT Host parameters.
;Call: Q1/ User's argument block address
; Q2/ Host node data base address
; P1/ User's argument block count
; P2/ Function code
LASET:
LACLR: MOVE T1,CAPENB ;To set and clear
TXNN T1,SC%WHL!SC%OPR ; must have sufficient capabilities.
RETBAD (CAPX1) ;Not enough.
UMOVE T1,.LAPRM(Q1) ;Get the parameter number to set/clear.
CAIL T1,MNSPAR ;Range check it
CAILE T1,MXSPAR ; ...
RETBAD (LATX06) ;Parameter number out of range
CAIE P2,.LACLR
IFSKP.
MOVX T3,LF%CLR ;Is this parameter clearable?
TDNN T3,TBFLGS-1(T1) ; ...
RETBAD (LATX07) ;No, return error
HRRZ T2,TBFLGS-1(T1) ;Get the value to clear to
JRST LASET0 ; and go clear it.
ENDIF.
UMOVE T2,.LAVAL(Q1) ;Get the new value to set
MOVX T3,LF%RNG ;Check if this parameter value should
TDNN T3,TBFLGS-1(T1) ; be range checked.
IFSKP. ;Yes
MOVE T3,TBRNGE-1(T1) ;Get the upper and lower ranges.
HRRZ T4,T3 ;Lower bound
HLRZS T3 ;Upper bound
CAML T2,T4
CAMLE T2,T3
RETBAD (LATX02)
ENDIF.
LASET0: HLRZ T3,TBFLGS-1(T1) ;Change flags to set.
ANDI T3,377
IORM T3,HN.FLG(Q2) ;Set them
XCT TBEXEC-1(T1) ;Do the store.
RETSKP
SUBTTL LATOP% JSYS -- SET/CLEAR SERVICE
;SSERVC - Set LAT Service
;Call: Q1/ User's parameter buffer
; Q2/ Host node data base address
; P2/ LATOP% function code
;Return:
; RET - Error return
; RETSKP - Sucess
SSERVC: SAVEAC <P3,P4>
CALL FNDSRV ;(T1-T4/T1)Find the service to be set/cleared.
RETBAD ()
MOVEM T1,P3 ;Save the service block address
CAIN P2,.LACLR ;Clearing rather than setting?
JRST CSERVC ;Yes.
SETZ P4,0 ;P4 will be used to assemble the change flags
UMOVE T1,.LAQUA(Q1) ;Get the flags and rating
TXNN T1,LA%RAT ;Set the rating?
IFSKP. ;Yes.
TXO P4,HNSVR ;Set rating change flag
HRRE T2,T1
MOVE T3,T2
AOS T2
CAIL T2,0 ;Range check the rating.
CAILE T2,^D256 ; ...
RETBAD () ;Out of range
STOR T3,GBRAT,+TMPGB ;Store the rating
ENDIF.
TXNN T1,LA%DSC ;Set the description?
IFSKP.
TXO P4,HNSVD ;Description change flag
UMOVE T1,.LADSC(Q1) ;Get the user's pointer to description string
MOVX T2,<POINT 7,GB.HID+TMPGB>;Where to put it.
MOVEI T3,ML.SID ;Maximum string count
CALL UMVAZS ;(T1-T3/T3)Move the string
RETBAD (LATX06)
STOR T3,GBLC,+TMPGB ;Store the description length
ENDIF.
SKIPN TMPBLK ;Did we add a new service?
IFSKP.
OPSTRM <AOS>,HNNSV,(Q2);Yes.
TXO P4,HNSVN ;Flag that number of services changed
ENDIF.
IORM P4,HN.FLG(Q2) ;Enter the assebled flags
MOVEI T1,GB.LEN ;Move the new service
XMOVEI T2,TMPGB ; to the service block
MOVE T3,P3 ; supplied by FNDSRV.
XBLT. T1
RETSKP
;CSERVC - Clear LAT Service
;Call: Q1/ User's parameter buffer
; Q2/ Host node data base address
; T1/ Address of service block to clear
;RET - Error return
;RETSKP - Sucess
CSERVC: MOVE T3,T1 ;Start of overlay
LOAD T1,HNNSV,(Q2) ;Number of services before clear
CAIN T1,1 ;There must always be at least one service
RETBAD(LATX07) ;So return an error.
IMULI T1,GB.LEN ;Total length of service blocks
XMOVEI T4,HN.SRV(Q2) ;Service block start address
ADD T1,T4 ;Address of first word outside service block
XMOVEI T2,GB.LEN(T3) ;First address to move down
SUB T1,T2 ;Number of words to move down
SKIPG T1 ;Is there a service block above?
JRST CSRVC0 ;No so nothing to move
XBLT. T1 ;Compress all blocks downward
CSRVC0: OPSTRM <SOS>,HNNSV,(Q2) ;One service less.
MOVEI T1,HNCLS!HNSVD!HNSVR!HNSVN
IORM T1,HN.FLG(Q2) ;Indicate service changed.
RETSKP
SUBTTL LATOP% JSYS -- SET LAT HOST NAME
;SETNNM - Set LAT host name
;Call: Q1/ User's parameter buffer
; Q2/ Host node data base address
;RET - Error return
;RETSKP - Sucess
SETNNM: OPSTR <SKIPE>,HNNMC,(Q2);Has one already been set?
RETBAD (LATX09) ;Yes, illegal to reset.
UMOVE T1,.LABFA(Q1) ;Node name string address from the user.
MOVX T2,<POINT 7,TMPBLK>;Pointer to where to build the string.
MOVEI T3,ML.NNM ;Maximum node name count.
CALL UMVAZS ;Move the ASCIZ string.
RETBAD (LATX06)
STOR T3,HNNMC,(Q2) ;Store the actual string count
MOVEI T1,<ML.NNM+4>/5 ;Maximum number of words in the string
XMOVEI T2,TMPBLK ;Move the string to
XMOVEI T3,HN.NAM(Q2) ; the host node data base
XBLT. T1 ; ...
RETSKP
SUBTTL LATOP% JSYS -- SET/CLEAR HOST IDENTIFICATION STRING
;SETNID/CLRNID - Set/Clear host identification string.
;Call: Q1/ User's parameter buffer
; Q2/ Host node data base address
;RET - Error return
;RETSKP - Sucess
SETNID: CAIN P2,.LACLR ;Clearing rather than setting?
JRST CLRNID ;Yes.
UMOVE T1,.LABFA(Q1) ;Node description string address from the user.
MOVX T2,<POINT 7,TMPBLK>;Pointer to where to build the string.
MOVEI T3,ML.DSC ;Maximum node description count.
CALL UMVAZS ;Move the ASCIZ string.
RETBAD (LATX06)
STOR T3,HNIDC,(Q2) ;Store the actual string count
MOVEI T1,<ML.DSC+4>/5 ;Maximum number of words in the string
XMOVEI T2,TMPBLK
XMOVEI T3,HN.ID(Q2)
XBLT. T1
RETSKP
CLRNID: SETZRO HNIDC,(Q2) ;Clear the string count
RETSKP
SUBTTL LATOP% JSYS -- SET/CLEAR HOST GROUP CODES
; SETCOD/CLRCOD - Set/clear access codes
;Call: Q1/ User's parameter buffer
; Q2/ Host node data base address
; P2/ .LACLR or .LASET
;RETSKP - always, no errors.
SETCOD: SAVEAC <P1>
STKVAR <USRPTR,MSKPTR>
SETZM TMPBLK ;Zero out the storage where mask to be built.
XMOVEI T2,TMPBLK ;Zero the first workd
XMOVEI T3,1(T2) ;Address of second word
MOVEI T1,^D7 ;Number of words to zero.
XBLT. T1 ;
UMOVE T1,.LABFA(Q1) ;Group code address in user space.
HRLI T1,441000 ;Make an 8-bit byte pointer
MOVEM T1,USRPTR ;Save it as pointer to user code string.
MOVX T1,<POINT 8,TMPBLK>;Pointer to temporary storage for mask
MOVEM T1,MSKPTR ;Save it too.
MOVEI P1,^D32 ;Number of bytes to do
DO.
XCTBU [ILDB T1,USRPTR];Get a user group code byte
CALL BITSWP ;Swap the bits
IDPB T1,MSKPTR ;Put into mask words
SOJG P1,TOP. ;Continue for full count
ENDDO.
MOVEI T1,^D8 ;32 bytes is 8 words
XMOVEI T2,AC.COD+7(Q2) ;Address of last group code word in database
DO.
MOVE T3,TMPBLK-1(T1) ;Get a mask word, going backwards
CAIN P2,.LACLR ;Clearing of Setting?
IFSKP.
IORM T3,(T2) ;Set the bits
ELSE.
ANDCAM T3,(T2) ;Clear the bits
ENDIF.
SOS T2
SOJG T1,TOP.
ENDDO.
RETSKP ;Return success.
;BITSWP - Swap all bits in an 8-bit byte
;Call: T1/ Byte to swap
;Returns:
; T1/ Swapped byte
BITSWP: SAVEAC <P1>
JUMPE T1,RTN ;If no bits, don't bother
MOVEI T3,1 ;Bit to test
MOVEI T4,200 ;Mirror bit
SETZ P1, ;Initialize result
DO.
TRNE T1,(T3) ;Is the bit set?
TRO P1,(T4) ;Yes, set mirror bit in result
LSH T3,1 ;Shift bit to test
LSH T4,-1 ; and mirror bit
JUMPN T4,TOP. ;Done?
ENDDO.
MOVE T1,P1 ;Return swapped byte in T1
RET
SUBTTL LATOP% JSYS -- SET MAXIMUM CIRCUITS
;SETMAC - Set Maximum Circuits
;Call: T2/ New Maximum Circuits value
; Q2/ Host node data base address
;RETSKP - always
SETMAC: STOR T2,HNMAC,(Q2) ;Store the new value
ADDI T2,MINACB ;HNMXC must be at least HNMAC+MINACB
OPSTR <CAILE T2,>,HNMXC,(Q2)
STOR T2,HNMXC,(Q2)
RETSKP
;UMVAZS - Get User ASCIZ String
;Call: T1/ User's ASCIZ Pointer
; T2/ Destination Pointer
; T3/ Maximum string count permitted
;RET - Error, string longer than maximum
;RETSKP Success
; T3/ Actual string count
RESCD
UMVAZS: STKVAR <MAXCNT>
MOVEM T3,MAXCNT ;Save the maximum count
SETZ T3, ;Clear the string count
TLC T1,-1 ;Make an ASCII pointer to the
TLCN T1,-1 ; user's buffer
HRLI T1,(<POINT 7,0>) ; if necessary.
UMVAZ0: XCTBU [ILDB T4,T1] ;Get a character from his string.
JUMPE T4,RSKP ;Null found so string ended
CAML T3,MAXCNT ;If we are at the maximum, read no more.
RET
IDPB T4,T2 ;Deposit character in temp storage.
AOJA T3,UMVAZ0 ;Increment string count
ENDSV.
;MMVAZS - Move ASCIZ string within monitor context
;Call: T1/ Source ASCIZ Pointer
; T2/ Destination Pointer
; T3/ Maximum string count permitted
;RET - If string longer than maximum, truncated.
; T3/ Actual string count
MMVAZS: STKVAR <MAXCNT>
MOVEM T3,MAXCNT ;Save the maximum count
SETZ T3, ;Clear the string count
MMVAZ0: ILDB T4,T1 ;Get a character from his string.
JUMPE T4,RTN ;Null found so string ended
CAML T3,MAXCNT ;If we are at the maximum, read no more.
RET
IDPB T4,T2 ;Deposit character at destination
AOJA T3,MMVAZ0 ;Increment string count
ENDSV.
SWAPCD
SUBTTL LATOP% JSYS -- SHOW CHARACTERISTIC HOST
;LASCH - Show LAT Host Characteristics
;Call: Q1/ User's parameter buffer
; Q2/ Host node data base address
;Return:
; RET - error
; RETSKP - success
LASCH: SAVEAC <P1,P2,P3>
UMOVE T3,.LABFA(Q1) ;User buffer address
;Check to see if the user provided buffer is large enough for all the data
LOAD T1,HNNSV,(Q2) ;Compute the total buffer size
IMULI T1,GB.LEN ; required.
ADDI T1,<HN.MXC-HN.MTI+<ML.LOC+3>/4+<ML.DSC+3>/4+<ML.NNM+3>/4+^D16>
XCTU [HRLM T1,.LABCT(Q1)];Tell user.
XCTU [HRRZ T2,.LABCT(Q1)];Get his buffer count.
CAMGE T2,T1 ;Is the user's buffer big enough?
RETBAD (LATX01) ;User buffer too small
;Move fixed length dynamic parameters from the host node database (HN) to the
;user's buffer.
MOVEI T1,<HN.MTI-HN.MXC+1>;Number words to move
XMOVEI T2,HN.MXC(Q2) ;Address of first HN parameter to move
XCT 1,[XBLT. T1]
;Move static parameters to the user's buffer.
MOVEI T1,5 ;Number of words to move
XMOVEI T2,[EXP <LAHPV,,LALPV>;Static parameter address
EXP <PROECO,,PROVER>
EXP <MXSLSI,,MXSLTS>
EXP <LMRFSI,,MXHSRV>
EXP <LHPRID,,0>]
XCT 1,[XBLT. T1]
;Move the access code words
MOVEI P3,^D32 ;Number of bytes for the access codes
XMOVEI P2,AC.COD(Q2) ;Address of the access codes
TXO P2,<OWGP. 8,0> ;Make global pointer
MOVE P1,T3 ;Current address in user's buffer.
TXO P1,<OWGP. 8,0> ;Make a byte pointer
DO.
ILDB T1,P2 ;Get a byte for group codes
CALL BITSWP ;Swap the bits
XCTBU [IDPB T1,P1] ;Deposit swapped byte into user buffer.
SOJG P3,TOP. ;Do all bytes
HRRZI T3,1(P1) ;Make user pointer an address again.
ENDDO.
;Move Host node name and host node description
MOVE T1,HN.NMC(Q2) ;[Name count,,description count]
MOVEI T1,<<ML.NNM+4>/5+<ML.DSC+4>/5+1>
XMOVEI T2,HN.NMC(Q2) ;Address of node name and description
XCT 1,[XBLT. T1]
;...
;...
;Move the service blocks
LOAD T1,HNNSV,(Q2) ;Number of services currently defined
UMOVEM T1,(T3) ;Move to user buffer
AOS T3 ;Advance buffer address
LOAD T1,HNNSV,(Q2) ;Get the size of the
IMULI T1,GB.LEN ; service blocks.
XMOVEI T2,HN.SRV(Q2) ;Address of service blocks
XCT 1,[XBLT. T1]
RETSKP
SUBTTL LATOP% JSYS -- SHOW TERMINAL CONNECTS
;
; LASTC - SHOW TERMINAL CONNECTS
;
;Call: Q1/ address of user's arg list
; Q2/ Address of Host node database
;Return:
; +1 error
; +2 success
;
LASTC: SAVEAC <P1,P2>
STKVAR <LTTCNT>
LOAD T1,HNCON,(Q2) ;How many do we think are connected?
MOVE P1,T1 ;Save count
IMULI T1,<<ML.SYS+4>/5> ;Multiply by size of returned block
CALL LABFCK ;Is his buffer big enough?
RETBAD() ;No
MOVEI T1,NTTLAH ;Get size of SBvect
MOVEM T1,LTTCNT ;Save in local for decrementing
UMOVE T2,.LABFA(Q1) ;Get user's buffer address
MOVE P2,SBVECT ;Point to table of SBs
LASTCL: SKIPE T1,(P2) ;Is there a slot block there?
CALL LAS1C ;Yes, move data for it to user's buffer
JRST LASTCN ;No, go for next one
SOJLE P1,LASTCD ;Have we given the user as many as we said?
LASTCN: SOSLE LTTCNT ;Or have we exhausted SBVECT?
AOJA P2,LASTCL ;No, just go for next data block
LASTCD: UMOVE T1,.LABFA(Q1) ;Done, get address of show buffer again
SUB T2,T1 ;Calculate number of words moved
XCTU [HRLM T2,.LABCT(Q1)] ;and store it.
RETSKP ;And give good return
;
; Routine to move one connect block to user's show buffer
;Call:
; T1/ Slot Block address
; T2/ Next address in user's buffer
;
;Return: +1 no attached terminal or circuit block now
; +2 Success. Data moved to user's buffer
;
; T2/ Updated next address to fill in user's buffer (in either case)
;
LAS1C: MOVE T3,T2 ;User's address where need it later.
SKIPE T2,SB.TDB(T1) ;Any LDB associated with slot?
SKIPN T4,SB.CBA(T1) ;Any circuit block?
RET ;No, skip this one
OPSTR <HRLZ T1,>,CBRSC,(T4) ;Yes,get Server name count
DYNST ;Yes, get TTY line number
UMOVEM T2,(T3) ;Give to user
UMOVEM T1,1(T3) ;Store counts
XMOVEI T2,CB.SNM(T4) ;and point to name string
MOVEI T1,<<ML.SYS+4>/5> ;Combined length of strings
ADDI T3,2 ; +2 for the words we have filled
XCT 1,[XBLT. T1] ;Fill in the user's buffer
MOVE T2,T3 ;Point P1 to the next free place in buffer
RETSKP ;and give good return
SUBTTL LATOP% JSYS -- SHOW SERVERS
;LASAS - Show All Known Servers
;Call: Q1/ User's parameter buffer
; Q2/ Host node data base address
;Return:
; RET - error
; RETSKP - success
LASAS: CAIGE P1,5 ;Is the user's arg block the right size?
RETBAD (ARGX04) ;No
UMOVE T1,.LAQUA(Q1) ;User's pointer to server name
XCTU [SKIPN T1,.LAQUA(Q1)] ;Specific server wanted?
IFSKP. ;Yes.
CALL MAKPTR ;Make a valid ASCIZ pointer.
CALL GTSRVR ;Find circuit block based on server name.
RETBAD () ;Unknown server
MOVE T4,T1 ;Save the circuit block address
MOVEI T1,<SASEND-SASBEG>;# words returned for single server
XCTU [HRLM T1,.LABCT(Q1)];Tell user.
XCTU [HRRZ T2,.LABCT(Q1)];Get his buffer count.
CAMGE T2,T1 ;Is the user's buffer big enough?
RETBAD (LATX01) ;User buffer too small
UMOVE T3,.LABFA(Q1) ;Get his buffer address
XMOVEI T2,SASBEG(T4) ;Address of source
XCT 1,[XBLT. T1] ;Move to user space
RETSKP ;Return successfully.
ENDIF.
LOAD T1,HNNCC,(Q2) ;Get the number of allocated circuit blocks
IMULI T1,<<<ML.SYS+4>/5>+3>;Compute space needed in user's buffer
XCTU [HRLM T1,.LABCT(Q1)];Tell user
XCTU [HRRZ T2,.LABCT(Q1)];Get his buffer count.
CAMGE T2,T1 ;Has user allocated large enough buffer?
RETBAD (LATX01) ;No
UMOVE T3,.LABFA(Q1) ;Get user buffer address
MOVE T4,HN.QAC(Q2) ;First element on the active queue
CALL SASLP ;Get all those on the active queue
MOVE T4,HN.QIC(Q2) ;Do the same for
CALL SASLP ; the inactive queue.
RETSKP ;Return successfully.
SASLP: JUMPE T4,RTN ;No more circuit blocks on this queue
MOVE T1,CB.RSC(T4) ;get <number,,name count>
UMOVEM T1,(T3) ;Give it to user
ADDI T3,1 ;Bump destination address
MOVEI T1,<<ML.SYS+4>/5> ;There are 4 words of name
XMOVEI T2,CB.SNM(T4) ;Address of first to copy
XCT 1,[XBLT. T1] ;Copy to user's space
DMOVE T1,CB.DNI(T4) ;Get Ethernet address
XCTU [DMOVEM T1,(T3)] ;Give it to the user
ADDI T3,2 ;Account for those words
LOAD T4,QLFWD,+CB.LNK(T4);Get the next CB
JRST SASLP ;And continue looping thru queue
SUBTTL LATOP% JSYS -- SHOW/ZERO COUNTERS
;LASCO - Show LAT Counters
;CALL: Q1/ User argument block address
; Q2/ LAT host node data base address
LASCO: CAIGE P1,5 ;Is the user's arg block the right size?
RETBAD (ARGX04) ;No
UMOVE T1,.LAQUA(Q1) ;Get server name requested
CALL GTLCOB ;Get the counter block based on server name.
RET ;Error, already reported
XCTU [HRLM T1,.LABCT(Q1)];Tell user
XCTU [HRRZ T3,.LABCT(Q1)];Get his buffer count.
CAMGE T3,T1 ;Has user allocated large enough buffer?
RETBAD (LATX01) ;No
UMOVE T3,.LABFA(Q1) ;Get his buffer address
XCT 1,[XBLT. T1]
RETSKP
;LAZCO - Zero LAT Counters
;CALL: Q1/ User argument block address
; Q2/ LAT host node data base address
LAZCO: MOVE T1,CAPENB ;To zero counters,
TXNN T1,SC%WHL!SC%OPR ; must have sufficient capabilities.
RETBAD (CAPX1) ;Not enough.
CAIGE P1,5 ;Is the user's arg block the right size?
RETBAD (ARGX04) ;No
UMOVE T1,.LAQUA(Q1) ;Get server name requested
CALL GTLCOB ;Get the counter block bases on server name.
RET ;Error, already reported
SETZM (T2) ;Zero the first counter
XMOVEI T3,1(T2) ;
SOSLE T1 ;Compute number of words to zero
XBLT. T1 ;Zero the block
RETSKP ;Return successfully.
;GTLCOB - Get LAT Counter Block. Get the length and address of the LAT
; counter block based on server number.
;
;CALL: T1/ Pointer to server name or [0,,-1]
;RET: Error - server unknown
;RETSKP:Success with
; T1/ Counter block length in words
; T2/ Counter block address
GTLCOB: CAIN T1,0 ;Zero local host counters?
IFSKP. ;Zero a particular server's counters
CALL MAKPTR ;Make a valid pointer
CALL GTSRVR ;Find circuit block based on server name
RETBAD () ;Unknown server
XMOVEI T2,CC.BEG(T1) ;Server counter block address
MOVEI T1,CC.LEN ;Server counter block length
ELSE. ;Local host counters wanted
MOVEI T1,HC.LEN ;Host counter block length
XMOVEI T2,HC.BEG(Q2) ;Host counter block address
ENDIF.
RETSKP
SUBTTL LATOP% JSYS -- Utility Routines -- FNDSRV
;FNDSRV - find the service block requested by the user based on the
; service name provided.
;Call: no arguments
;Return:
; RET - error
; RETSKP - success, T1/ address of service block
FNDSRV: SAVEAC <P1,P2>
MOVEI T1,TMPLNG-1 ;Zero the storage for assembling user's
XMOVEI T2,TMPBLK ; service name.
XMOVEI T3,TMPBLK+1 ; ...
SETZM TMPBLK ; ...
XBLT. T1 ; ...
;Get the Service Name string from the user and put it into the service
;block build area.
UMOVE T1,.LABFA(Q1) ;Pointer to user's service name string
CALL MAKPTR ;Make a valid ASCIZ pointer
XMOVEI T2,TMPGB+GB.NAM ;Pointer of where to put it
TXO T2,<OWGP. 7,0> ; ...
MOVEI T3,<ML.SNM+4/5> ;Maximum length
CALL UMVAZS ;Move the string to exec space
RETBAD (LATX07) ;Service name too long
STOR T3,GBNC,+TMPGB ;Store the count of service name from user
;Loop through all service blocks looking for a name match.
XMOVEI P2,HN.SRV(Q2) ;Address of start of service blocks
OPSTR <SKIPN P1,>,HNNSV,(Q2);Number of currently defined services
JRST FSFALS ;There are none defined.
DO.
XMOVEI T1,GB.NAM(P2) ;Address of service block's service name
TXO T1,<OWGP. 7,0>
LOAD T2,GBNC,(P2) ;Count of service block's service name
XMOVEI T3,TMPGB+GB.NAM;Address of user's service name
TXO T3,<OWGP. 7,0>
LOAD T4,GBNC,+TMPGB ;Count of user's service name
CALL SCMPAR ;Compare the strings
IFSKP. ;MATCH FOUND
MOVEI T1,.LASET ;If a SET...
XCTU [CAME T1,.LAFCN(Q1)]
IFSKP.
MOVEI T1,GB.LEN ; then copy entire service block to the
XMOVEI T2,(P2) ; temporary block so that new values
XMOVEI T3,TMPGB ; overlay the old.
XBLT. T1
ENDIF.
MOVE T1,P2 ;In both cases (SET/CLEAR) return service
RETSKP ; block address.
ENDIF.
ADDI P2,GB.LEN ;No match here so
SOJG P1,TOP. ; advance to next service block
ENDDO.
;Service block not found. If function is SET, see if there is room for
;a new service. If function is CLEAR, nothing further required.
FSFALS: MOVEI T1,.LASET ;If service name not found and the function
XCTU [CAME T1,.LAFCN(Q1)]; request is not a SET,
RETBAD (LATX07) ; then return an error. Otherwise,
XMOVEI T1,<GB.LEN*MXHSRV+HN.SRV>(Q2); get end of service block address
CAML P2,T1 ; and compare with first free block address
RETBAD (LATX08) ;There is no room for new service.
SETOM TMPBLK ;There is room. Flag to increment # services.
MOVE T1,P2 ;Return service block address for new entry.
RETSKP
SUBTTL LATOP% JSYS -- Utility Routines -- GTSRVR
;GTSRVR - Routine to get the circuit block address for a particular
; server based on server name.
;
;CALL: T1/ Pointer to server name supplied by user
; Q2/ LAT host node data base address
;RET - Error, no circuit block with the requested server name
;RETSKP Success,
; T1/ Circuit block address for requested server
GTSRVR: SAVEAC Q1 ;Get an AC for circuit block address.
MOVX T2,<POINT 7,TMPBLK>;Pointer to where to move name string.
MOVEI T3,ML.DSC ;Maximum server name string length.
CALL UMVAZS ;(T1-T3/T3)Move the ASCIZ string.
RETBAD (LATX04)
MOVX T1,<POINT 7,TMPBLK>;Pointer to user's name string in local storage
MOVE T2,T3 ;Length of the user's name string.
LOAD Q1,HNQAC,(Q2) ;Get first CB on active queue
CALL GCBNAM ;See if desired server there
IFSKP.
MOVE T1,Q1 ;Return the CB address on successful
RETSKP ; match.
ENDIF.
LOAD Q1,HNQIC,(Q2) ;Get first CB on inactive queue
CALL GCBNAM
IFSKP.
MOVE T1,Q1 ;Return the CB address on successful
RETSKP ; match.
ENDIF.
RETBAD (LATX04) ;Not anywhere, return error.
;GCBNUM - searches a particular queue of circuit blocks looking for a match
; on the server name.
GCBNAM: SAVEAC <T1,T2> ;Preserve string pointer and count.
JUMPE Q1,RTN ;No more circuit blocks on this queue
DO.
XMOVEI T3,CB.SNM(Q1) ;Address of server name
TXO T3,<OWGP. 7,0> ;Make a pointer
LOAD T4,CBRSC,(Q1) ;Count in name
CALL SCMPAR ;Do the compare
SKIPA ;No match
RETSKP ;Match
OPSTR <SKIPN Q1,>,QLFWD,+CB.LNK(Q1)
RET ;No match for any CBs on queue.
JRST TOP. ;Try next CB.
ENDDO.
SUBTTL LATOP% JSYS -- Utility Routines -- SCMPAR String Compare
;SCMPAR - String Compare
;Call: T1/ First string byte pointer
; T2/ First string count
; T3/ Second string byte pointer
; T4/ Second string count
;RET Mismatch
;RETSKP Match
SCMPAR: SAVEAC <T1,T2,T3,T4> ;Preserve the byte pointers.
STKVAR <PTR1,PTR2>
CAME T2,T4 ;If lengths don't match then obviously
RET ; the strings don't either.
MOVEM T1,PTR1 ;Save the byte pointers
MOVEM T3,PTR2 ; to the strings.
DO.
ILDB T1,PTR1 ;Get next character from
ILDB T2,PTR2 ; each string.
CALL UPPERC ;Uppercase one.
EXCH T1,T2
CALL UPPERC ;Uppercase the other.
CAME T1,T2 ;Compare the result.
RET ;Different so return failure.
SOJG T4,TOP. ;Match, so continue with the next.
ENDDO.
RETSKP ;Full match, return success.
ENDSV.
;UPPERC - Uppercase a character
;Call: T1/ Character
;RET Always with T1/ uppercased character
UPPERC: CAIL T1,"a"
CAILE T1,"z"
SKIPA
SUBI T1,40
RET
;MAKPTR- Make a valid ASCIZ pointer if not already
MAKPTR: MOVE T2,T1 ;Make a proper pointer in case the user
TLC T2,-1 ; supplied one of the form
TLCN T2,-1 ; -1,,address
HRLI T1,440700 ; ...
RET
;LABFCK - Routine to check if user supplied buffer large enough
;Call: T1/ Minimum size required of user buffer
; Q1/ User's argument block address
;Return +1/ Too small
; +2/ Large enough
LABFCK: XCTU [SKIPGE T1,.LABCT(Q1)]
RETBAD (LATX01)
RETSKP
SUBTTL LATINI - LAT Initialization
;LATINI - LAT Initialization
;
;Call: CALL LATINI
; Error return - resource failure
; Normal Return
;
RESCD
LATINI::ACVAR <HN,XB,W1,W2> ;Reserve AC for Host Node data base address
MOVEI T1,HC.LST ;Get memory for the Host Node (HN) tables
CALL MMGTZW ;Get zeroed memory
JRST INIRES ;Resource failure. Should not happen.
MOVE HN,T1 ;Base address for host node database references
MOVEM T1,LAHNDB ;Store the data base address
MOVEI T1,CBMAXI ;Get storage for CBVECT
CALL MMGTZW ;
JRST INIRES ;Resource failure.
MOVEM T1,CBVECT ;Save the address
MOVEI T1,NTTLAH ;Get storage for SBVECT
CALL MMGTZW
JRST INIRES ;Resource failure.
MOVEM T1,SBVECT ;Save the address
DMOVE T1,OURNAM ;Get the local host name
DMOVEM T1,HN.NAM(HN) ;Store in HN block
MOVE T1,OURCNT ;Host name length in characters
STOR T1,HNNMC,(HN) ;Store in HN block
MOVX T1,<POINT 7,SVN##> ;Pointer to MONNAM.TXT
XMOVEI T2,HN.ID(HN) ;Where to put it.
TXO T2,<OWGP. 7,0> ; ...
MOVEI T3,ML.DSC ;Maximum length allowed
CALL MMVAZS ;Move the string
TRN ;Don't care, take truncated string
STOR T3,HNIDC,(HN) ;Store real count
MOVE T1,LASDEF ;Get the default LAT Access State
STOR T1,HNLAS,(HN) ; and store it
MOVE T1,RTRADR ;Get the default host number
STOR T1,HNNUM,(HN)
MOVEI T1,^D30 ;Default Host message retransmit limit
STOR T1,HNRLI,(HN)
MOVEI T1,^D1000 ;Default host virtual circuit timer(ms)
STOR T1,HNTIM,(HN)
MOVEI T2,^D30 ;Default host multicast timer (secs)
STOR T2,HNMTI,(HN)
MOVEI T1,MINACB ;Default maximum allocatable circuit blocks
STOR T1,HNMXC,(HN)
;...
;...
MOVEI T1,^D20 ;Default maximum active circuits
STOR T1,HNMAC,(HN)
MOVEI T1,CBMAXI ;Get a random number in the range or 1 to
CALL RANDOM ; maximum value of circuit block index
STOR T1,HNNXI,(HN) ;Store as next CB index to assign
MOVEI T1,NTTLAH ;Default max number of simultaneous connects
STOR T1,HNMCO,(HN)
MOVEI T1,^D32 ;Number of access code bytes
STOR T1,ACLNG,(HN)
MOVX T1,1B7 ;Default to group code 0
MOVEM T1,AC.COD(HN) ;Store as first byte of access codes
MOVEI T1,1
STOR T1,HNNSV,(HN) ;Default number of host services offered
XMOVEI W1,HN.SRV(HN) ;Address of the host service blocks
STOR T1,GBRAT,(W1)
MOVE T1,OURCNT ;Default service name is node name so
STOR T1,GBNC,(W1) ; store the count
DMOVE T1,OURNAM ; and the name
DMOVEM T1,GB.NAM(W1)
MOVX T1,<POINT 7,SVN##> ;Pointer to MONNAM.TXT
XMOVEI T2,GB.HID(W1) ;Make it the service identification
TXO T2,<OWGP. 7,0> ; ...
MOVEI T3,ML.DSC ;Maximum length allowed
CALL MMVAZS ;Move the string
TRN ;Don't care, take truncated string
STOR T3,GBLC,(W1) ;Store real count
XMOVEI XB,HN.MCM(HN) ;Address of the multicast message block
MOVE T1,[BYTE (8)11,0,53,0,(4)0];Store multicast address
MOVE T2,[BYTE (8)0,17,0,0]; ...
OPSTRM <DMOVEM T1,>,UNDAD,+UNB.OF(XB);09-00-2B-00-00-0F
SETO T1,0 ;Use random number for incarnation count
CALL BMCFXD ;Build the first (fixed) ^D12 bytes
CALL BMCACS ;Enter the host access code string (fixed)
CALL BMCNID ;Enter the host node name and description
CALL BMCSRV ;Build the services
SETONE HNLOK,(HN) ;Initialize database lock
STOR XB,UNRID,+UNB.OF(XB);Store for xmit complete processing
MOVEI T1,^D255 ;Get a random number in range 1-255 for
CALL BLDSTM ;Now build the START message template
MOVSI T1,-NSBWDS ;Initialize free slot block words to
INISBN: SETOM NFRSBQ(T1) ; all slots free (all bits 1's)
AOBJN T1,INISBN ; ...
;...
;...
SETZRO UNCHN,+UNB.OF(XB);For now, later must read channel list
SETZRO UNPAD,+UNB.OF(XB);We use padding
MOVEI T1,^B0110000000000100;Protocol ID is 60-04
STOR T1,UNPRO,+UNB.OF(XB);
XMOVEI T1,LATCBR ;Callback routine address
STOR T1,UNCBA,+UNB.OF(XB)
MOVX T1,NU.OPN ;NISRV Open function
XMOVEI T2,UNB.OF(XB) ;Use this for open as well
CALL DLLUNI
IFSKP.
XMOVEI T2,UNB.OF(XB) ;Load address of UN block
CALL LATLSC ;Check to see if NI is running
LOAD T1,UNPID,+UNB.OF(XB) ;Get the PID return from the DLL
STOR T1,HNPID,(HN) ; and store for later calls to the DLL.
LOAD T1,HNLAS,(HN) ;Get the access state.
LOAD T2,HNMTI,(HN) ;Get multicast timer value
IMULI T2,^D1000 ;Multicast in millisecs
MOVEM T2,LATMCT ;Initialize scheduler long timer word
CALL GETRBF ;Get a buffer for receives
TRN ;Will have to get buffers later
ENDIF.
RET
INIRES:
BUG. (CHK,LATINE,LATSRV,SOFT,<LATINI failed to initialize>,,<
Cause: Could not obtain sufficient memory for the LAT host databases.
Action: Determine why there is so little resident memory available at system
startup.
Data: HN.LST words for the host node database, CBMAXI words for CBVECT,
and NTTLAH words for SBVECT.
>)
SKIPE T1,LAHNDB ;Start with a clean slate when we try
CALL MMFREE ; to initialize later...
SKIPE T1,CBVECT ; ...
CALL MMFREE ; ...
SKIPE T1,SBVECT ; ...
CALL MMFREE ; ...
RET
ENDAV.
SUBTTL Multicast Transmitter
;
;LATXMC - Transmit Multicast Message
;
;CALL: CALL LATXMC
; Normal Return
LATXMC::ACVAR <HN,XB,W1,W2>
MOVE HN,LAHNDB ;Get the HN data base address
LOAD T1,HNMTI,(HN) ;Reset the
IMULI T1,^D1000 ; multicast
MOVEM T1,LATMCT ; timer
CALL CHKXMC ;Should be transmit the multicast this time?
RET ;No.
CALL GETRBF ;Post more receive buffers if necessary.
TRN ;Not necessary.
CALL DYNRAT ;Check to see if dynamic rating needs update.
XMOVEI XB,HN.MCM(HN) ;Get the address of the multicast msg
OPSTR <SKIPE W1,>,HNCFL,(HN);If nothing changed in HN database
OPSTR <SKIPL>,HNLOK,(HN); or something changed by db id locked
JRST SNDMNC ; then send the old image of mc msg
CAIE W1,HN%SVR ;Did only the ratings change?
JRST LATXM0 ;No, something else changed
CALL BMCRAT ;Go update the ratings
JRST LATXM2 ; and send the mc msg
LATXM0: SETZ T1,0 ;So BMCFXD will increment incarnation count
TRNE W1,HN%OTH ;Did something in fixed part of mc change?
CALL BMCFXD ;Yes, go rebuild fixed part of mc msg
TRNE W1,HN%ACS ;Did any access codes change?
CALL BMCACS ;Yes, go rebuild access code field
TRNE W1,HN%NDD ;Did the host node description change?
CALL BMCNID ;Rebuild the node description
TRNN W1,HN%NDD ; and the service fields
LATXM1: TRNE W1,HN%SVN!HN%SVD!HN%SVR;Did anything in any service change?
CALL BMCSRV ;Yes, reconstruct all service fields
LATXM2: SETZRO HNCFL,(HN) ;Clear data base change flags
SENDMC: MOVX T1,<POINT 8,<SBF.OF+1>(XB),23>;Pointer msg change flags
LDB T2,T1 ;Message incarnation field
AOS T2 ;Add one
DPB T2,T1 ; and put back into msg
ILDB T2,T1 ;Load current change flag settings from msg
TDC T2,W1 ;Complement those bits which represent change
DPB T2,T1 ; and put back into msg
SNDMNC: XMOVEI T1,<SBF.OF>(XB) ;Set up one word global to buffer for
TXO T1,<OWGP. 8,0> ; NISRV and
STOR T1,UNBFA,+UNB.OF(XB); store in UN block
LOAD T1,HNPID,(HN) ;Get the PID for the DLL
STOR T1,UNPID,+UNB.OF(XB)
MOVX T1,NU.XMT ;Set NI function to transmit
XMOVEI T2,UNB.OF(XB) ;Address of arguement block for NISRV
CALL DLLUNI ;Call NI service
TRN ;Ignore error
RET ;Return
SUBTTL Routine to check/compute the Dynamic Rating
;
;DYNRAT - Routine to check/compute the Dynamic Rating
;
DYNRAT: MOVE T1,RJAV+2 ;15 minute load average
FSC T1,2 ;Multiply by 4
FIXR T1,T1 ;and convert/round to integer
SUBI T1,^D255 ;Subtract from 255 to give negative rating.
SKIPLE T1 ;Assure rating
MOVX T1,-1 ; is at least 1
MOVMS T1 ;Make rating positive
OPSTR <CAMN T1,>,HNRAT,(HN) ;Compare with current dynamic rating
RET ;No change; return.
STOR T1,HNRAT,(HN) ;Store new rating in HN block
SETONE HNSVR,(HN) ;Indicate rating has changed.
RET
SUBTTL Routines to Build the Host Multicast Message -- BMCFXD
;
;BMCFXD - Build fixed portion of the multicast message
;
;Call: T1/ Incarnaction count flag
; HN/ Host Node Data Base Address
; XB/ Address of the multicast message block in HN
; CALL BMCFXD
;
; This routine builds the first ^D12 bytes of the multicast message. It is
; called either to build a new message or to update the fixed portion if any
; of the parameters in the fixed portion have changed since the last multicast
; message was transmitted. This routine does not modify the message count.
BMCFXD: STKVAR <INCFLG> ;Save the incarnaction
MOVEM T1,INCFLG ; flag.
MOVX T1,<POINT 8,<SBF.OF>(XB)> ;Byte pointer to start of msg
STOR T1,UNBFA,+UNB.OF(XB); is needed to fill in the msg header
MOVEI T1,MT.MCA_2 ;Message type for multicast message
OPSTRM <IDPB T1,>,UNBFA,+UNB.OF(XB)
MOVEI T1,^D8 ;Set 80ms preferred server circuit timer
OPSTRM <IDPB T1,>,UNBFA,+UNB.OF(XB)
MOVEI T1,LALPV_^D8+LAHPV;Highest and lowest permitted protocol version
CALL LAP2B0
MOVEI T1,PROECO_^D8+PROVER ;Enter current protocol version and ECO
CALL LAP2B0
OPSTR <ILDB T1,>,UNBFA,+UNB.OF(XB);Get old incarnation count and assume
AOS T1 ; we just want to increment it.
SKIPN INCFLG ;If this is initialization, we want a "random"
IFSKP. ; incarnation count instead.
MOVEI T1,^D255 ;Maximum value incarnation count can have.
CALL RANDOM ; the initial message incarnation count.
ENDIF.
OPSTRM <DPB T1,>,UNBFA,+UNB.OF(XB); and put back
LOAD T1,HNCFL,(HN) ;Get the change flags
OPSTRM <IDPB T1,>,UNBFA,+UNB.OF(XB)
MOVEI T1,LMRFSI+^D14 ;Receive buffer size (including E-net header)
CALL LAP2B0
LOAD T1,HNMTI,(HN) ;Get the multicast timer interval
OPSTRM <IDPB T1,>,UNBFA,+UNB.OF(XB)
MOVEI T1,0 ;Set status indicating accepting new sessions.
LOAD T2,HNLAS,(HN) ;Get the current LAT access state
CAIE T2,LS.ON ;Is it on?
MOVEI T1,1 ;No, indicate not accepting new sessions.
OPSTRM <IDPB T1,>,UNBFA,+UNB.OF(XB)
RET
SUBTTL Routines to Build the Host Multicast Message -- BMCFXD
;
;BMCACS - Enter Access Codes into the Multicast Message - BMCACS
;
;Call: HN/ Host Node Data Base Address
; XB/ Address of the multicast message block in HN
; CALL BMCACS
; Normal Return
;
; This routine builds ^D32 bytes of host access codes. It is called either to
; build a new message or to update the fixed length access code field if any of
; the access codes have changed since the last multicast message was
; transmitted. This routine does not modify the message count.
BMCACS:
MOVX T1,<POINT 8,<SBF.OF+^D12/4>(XB)> ;ACs start at a fixed location
STOR T1,UNBFA,+UNB.OF(XB);Store as byte pointer to message buffer
LOAD T1,ACLNG,(HN) ;Count of the access code string
MOVX T2,<POINT 8,AC.COD(HN)> ;Source string byte pointer
CALL PTCST0 ;Transfer the string to the message
RET
SUBTTL Routines to Build the Host Multicast Message -- BMCNID
;
;BMCNID - Enter Access Codes into the Multicast Message - BMCNID
;
;Call: HN/ Host Node Data Base Address
; XB/ Address of the multicast message block in HN
; CALL BMCNID
; Normal Return
;
; This routine enters the host node name and descriptor strings into the
; multicast message block. It is called either to build a new message or to
; update the fixed length access code field if the node name or descriptor
; has changed since the last multicast message was transmitted. If this
; routine is called, the rest of the multicast message must be rebuilt. This
; routine does not modify the message count.
BMCNID:
MOVX T1,<POINT 8,<SBF.OF+^D12/4+^D32/4>(XB),7> ;Node name starts here
STOR T1,UNBFA,+UNB.OF(XB);Store as byte pointer to message buffer
LOAD T1,HNNMC,(HN) ;Host name count
MOVX T2,<POINT 7,HN.NAM(HN)> ;Source string byte pointer
CALL PTCST0 ;Transfer the host node name to m.c.msg
LOAD T1,HNIDC,(HN) ;Count of host node description string
MOVX T2,<POINT 7,HN.ID(HN)> ;Move the host node id string to the
CALL PTCST0 ; m.c. message
RET
SUBTTL Routines to Build the Host Multicast Message -- BMCSRV
;
;BMCSRV - Build the Available Host Services Data - BMCSRV
;
;Call: HN/ Host Node Data Base Address
; XB/ Address of the multicast message block in HN
; CALL BMCSRV
; Normal Return
;
; This routine enters all service blocks and the service classes into the
; multicast message block. It is called either to build a new message or to
; update the message when any service name or description has changed since
; the last multicast message was transmitted. This routine does modify the
; message count.
BMCSRV: SAVEAC <W1,W2>
LOAD W1,HNNSV,(HN) ;Get the total number of offered services
SKIPN W1 ;Must be at least one service to offer
RET ;Nope.
MOVEI T4,^D12+^D33+1 ;Initialize msg count
MOVX T3,<POINT 8,<SBF.OF+^D12/4+^D32/4>(XB),7>;Get pointer to node name
ILDB T1,T3 ;Get node name count
ADDI T4,1(T1) ;Include in total msg count
ADJBP T1,T3 ;Adjust to node descriptor
ILDB T3,T1 ;Get the node description count
ADDI T4,1(T3) ;Include in total msg count
ADJBP T3,T1 ;Adjust pointer to start of Service Block
STOR T4,UNBSZ,+UNB.OF(XB);Store msg count so far
STOR T3,UNBFA,+UNB.OF(XB);Current message byte pointer
OPSTRM <IDPB W1,>,UNBFA,+UNB.OF(XB);Already counted
XMOVEI W2,HN.SRV(HN) ;Address of start of service blocks
SRVLP: OPSTR <SKIPGE T1,>,GBRAT,(W2) ;Get the service rating
LOAD T1,HNRAT,(HN) ;If negative, load current host dynamic rating.
OPSTRM <AOS>,UNBSZ,+UNB.OF(XB);Account for rating in the byte count
OPSTRM <IDPB T1,>,UNBFA,+UNB.OF(XB);Store in mc msg
LOAD T1,GBNC,(W2) ;Get the service name count
MOVX T2,<POINT 7,GB.NAM(W2)> ;Pointer to service name
CALL PTCSTR ;Move name string to mc msg
LOAD T1,GBLC,(W2) ;Get the service description count
MOVX T2,<POINT 7,GB.HID(W2)>;Pointer to the service description string
CALL PTCSTR ;Move to mc msg
ADDI W2,GB.LEN ;Address of next block
SOJN W1,SRVLP ;Loop through all services
MOVEI T1,1_^D8+1 ;Service class 1 only
CALL LAP2BY
RET
SUBTTL Routines to Build the Host Multicast Message -- BMCRAT
;
;BMCRAT - Update the MC Msg with the current service ratings - BMCRAT
;
;Call: HN/ Host Node Data Base Address
; XB/ Address of the multicast message block in HN
; CALL BMCRAT
; Normal Return
;
; This routine loops though all the service blocks and updates the
; corresponding service rating in the multi-cast message. This routine does
; NOT modify the message count itself.
BMCRAT: SAVEAC <W1,W2>
MOVX T3,<POINT 8,<SBF.OF+^D12/4+^D32/4>(XB),7>;Get pointer to node name
ILDB T1,T3 ;Get node name count
ADJBP T1,T3 ;Adjust to node descriptor
ILDB T3,T1 ;Get the node description count
ADJBP T3,T1 ;Adjust pointer to start of Service Block
ILDB W1,T3 ;Get number of services from msg
XMOVEI W2,HN.SRV(HN) ;Address of start of service blocks
RATLP: OPSTR <SKIPGE T1,>,GBRAT,(W2) ;Get the service rating
LOAD T1,HNRAT,(HN) ;If negative, load current host dynamic rating.
IDPB T1,T3 ;Store updated rating in mc msg
LOAD T1,GBNC,(W2) ;Get the service name count
OPSTR <ADD T1,>,GBLC,(W2);Add the service description count
ADDI T1,2 ;Account for the 2 count fields
ADJBP T1,T3 ;Adjust the pointer
MOVE T3,T1 ;Put adjusted pointer back where we want it
ADDI W2,GB.LEN ;Address of next block
SOJN W1,RATLP ;Loop through all services
RET
SUBTTL Multicast Transmit Check Routine
;CHKXMC - Check for Transmit of Multicast Message
;Call: HN/ Address of the Host Node Data Base
;RET - Don't transmit
;RETSKP Transmit
CHKXMC: LOAD T1,HNLAS,(HN) ;Transmit only if LAT access state is ON and
LOAD T2,HNNMC,(HN) ; there is a host name defined.
CAIN T1,LS.ON ; is ON.
SKIPN T2
RET
TMNE HNRUN,(HN) ;Is the NIA running?
RET ;No, don't send any messages.
RETSKP
SUBTTL Build the START Message Template
;BLDSTM - Build the START Message Template
;
;Call: HN/ Address of the Host Node Data Base
; CALL BLDSTM
; Normal Return
;
; This routine builds the "static" portions of the start message: those
; fields which do not change very frequently. Fields which change frequently
; are set up by the transmitting routines. This routine also sets up the
; message size in UNBSZ of the NISRV UN block.
BLDSTM: SAVEAC <W1>
XMOVEI XB,HN.SMT(HN) ;Address of START message template
MOVX T1,<POINT 8,<SBF.OF+<SZ.MHD>/4>(XB)>;Point beyond the msg header
STOR T1,UNBFA,+UNB.OF(XB); since it will change with each transmission.
MOVEI W1,^D12 ;Count of fixed fields (including count fields)
MOVEI T1,LMRFSI+^D14 ;Minimum receive buffer size
CALL LAP2B0 ;Store in msg
MOVEI T1,PROECO_^D8+PROVER ;Enter current LAT protocol version
CALL LAP2B0 ; and ECO
LOAD T1,HNMCO,(HN) ;System-wid maximum LAT connects allowed
CAILE T1,MXSLTS ; compared to max slots per virtual circuit
MOVEI T1,MXSLTS ;Get the smaller of the two
CALL LAP2B0
MOVEI T1,0 ;Timers are non-zero when from server
CALL LAP2B0 ; only.
LOAD T1,HNNUM,(HN) ;Get the host number
CALL LAP2B0 ; and store as 2 bytes in msg
MOVEI T1,LHPRID ;LAT Host product ID is TOPS-20 Host
CALL LAP2B0 ; and store as 2 bytes in msg
LOAD T1,HNNMC,(HN) ;Host Node Name count
ADDI W1,1(T1) ;Add to the total message byte count
MOVX T2,<POINT 7,HN.NAM(HN)>;Host node name source string
CALL PTCST0 ;Put into start message as NODE NAME
LOAD T1,HNNMC,(HN) ;Host Node Name count
ADDI W1,1(T1) ;Add to the total message byte count
MOVX T2,<POINT 7,HN.NAM(HN)>;Host node name source string
CALL PTCST0 ;Put into start message as SYSTEM NAME
LOAD T1,HNIDC,(HN) ;Count of description string
ADDI W1,1(T1) ;Add to the total message byte count
MOVX T2,<POINT 7,HN.ID(HN)>;Description string source pointer
CALL PTCST0 ;Put into start message
MOVEI T1,0 ;There are no parameters
OPSTRM <IDPB T1,>,UNBFA,+UNB.OF(XB); is zero
ADDI W1,1 ;Include in total count
CAIG W1,MINXBF ;Send at least the minimum
MOVEI W1,MINXBF ; size.
STOR W1,UNBSZ,+UNB.OF(XB);Store message byte count
STOR XB,UNRID,+UNB.OF(XB);Store buffer address for completion routines.
RET
ENDAV.
SUBTTL LAINTR -- LAT DLL Callback Routinea
;LATCBR - dispatch to routine to handle DLL callback
;
;Call: T1/ NU.RCV
; T2/UN block address
; CALL LATCBR
; Normal return
;
LATCBR: ACVAR <HN,XB,RB> ;Reserve some registers
MOVE HN,LAHNDB ;Get the host node data base address
MOVE T4,T3 ;Save NISRV's error register
CAIL T1,MINCBF ;Validate the callback function code
CAIG T1,MAXCBF
CALLRET @CBRDSP-MINCBF(T1);Valid, call the proper routine
BUG. (CHK,LATICB,LATSRV,SOFT,<LATCBR called from NISRV with illegal callback function code>,<<T1,CODE>>,<
Cause: NISRV has called the LATSRV callback routine with an invalid function
code.
Data: CODE - Function code
>)
ILLCBR:
RET
MIN. (MINCBF,<NU.XMT,NU.RCV,NU.RCI,NU.SCA,NU.RCC>) ;Minimum callback function
MAX. (MAXCBF,<NU.XMT,NU.RCV,NU.RCI,NU.SCA,NU.RCC>) ;Maximum callback function
;**;[7468]Replace 1 line with 2 at CBRDSP 22-APR-87 RBW
CBRDSP: REPEAT <MAXCBF-MINCBF+1>,<
IFIW ILLCBR> ;[7468]Prevent ILLUUO on illegal callbacks
LHDSP. (CBRDSP,NU.XMT-MINCBF,LAINTX) ;Datagram transmit complete
LHDSP. (CBRDSP,NU.RCV-MINCBF,LAINTR) ;Datagram received
LHDSP. (CBRDSP,NU.RCI-MINCBF,LATLSC) ;Link state change
LHDSP. (CBRDSP,NU.SCA-MINCBF,ILLCBR) ;Illegal callback, not used by LAT
LHDSP. (CBRDSP,NU.RCC-MINCBF,ILLCBR) ;Illegal callback, not used by LAT
SUBTTL LAINTR -- Interrupt Level Virtual Circuit Message Receiver
;LAINTR - Processes a circuit message at NI interrupt level
;
;Call: T1/ NU.RCV
; T2/UN block address
; T4/NISRV's T3
; CALL LAINTR
; Normal return
;
LAINTR: LOAD RB,UNRID,(T2) ;Get address of message block
MOVEI T1,UN.LEN ;Length of the block to copy
XMOVEI T3,UNB.OF(RB) ;Address of where to copy the UN block
XBLT. T1 ;Copy the UN block to buffer header
MOVEI T1,NU.RCV ;Scheduler needs to know buffer type.
MOVE T2,RB ;Address of element to put onto queue
CALL LAINT0 ;Do common actions
RET ;And return to NISRV dismissing interrupt
SUBTTL LAINTX - Interrupt Level Virtual Circuit Message Receiver
;LAINTX - Processes a circuit message at NI interrupt level
;
;Call: T1/ NU.XMT
; T2/UN block address
; T4/NISRV's T3
; CALL LAINTX
; Normal return
;
LAINTX: LOAD XB,UNRID,(T2) ;Get the buffer address
LOAD T3,UNDAD,+UNB.OF(XB);Get first 4 bytes (low order) of NI address
TXNE T3,1B7 ;Is the multicast bit on?
RET ;Yes, nothing to do
MOVX T3,<POINT 8,<SBF.OF>(XB)>;Point to the msg header
ILDB T2,T3 ; and get the message type
LSH T2,-2 ;Shift off M and RRF bits
CAIE T2,MT.STA ;If a START message,
IFSKP. ; then release lock on the START message
SETZRO HNCIP,(HN) ; template and return.
RET
ENDIF.
MOVE T2,XB
CALL LAINT0 ;Do common actions
RET
; Routine to perform interrupt level actions common to both receive data and
; transmit complete.
LAINT0: STOR T1,UNCBA,+UNB.OF(T2);Store callback type for scheduler processing
STOR T4,UNSPI,+UNB.OF(T2);Save NISRV's error return
OPSTR <SKIPN T3,>,HNNIQ,+1(HN);Is the Q currently empty?
IFSKP. ;NO
STOR T2,UELW1,(T3) ;New forward for old Q tail element
SETZRO UELW1,(T2) ;New tail's forward link is zero.
ELSE. ;YES
STOR T2,HNNIQ,(HN) ;New queue header forward pointer
ENDIF.
STOR T2,HNNIQ,+1(HN) ;New queue header tail pointer
RET
ENDAV.
SUBTTL LARSCH - Scheduler Level Virtual Circuit Message Receiver
;LARSCH - Complete circuit message processing at scheduler level
LARSCH::ACVAR <HN,XB,RB,CB,SB,W1,W2,MD>;Get a set of dedicated ACs
TRVAR <MSGDID,MSGSID,MSGACK,STPCOD>;Message hdr variable, etc.
;**; [7234] Add 1 line after LARSCH:+1 HMP 24-Jan-86
SETZ CB, ;[7234] No circuit block yet
SKIPN HN,LAHNDB ;Get the host node database address
RET ;If none, not initialized yet.
CALL MOVNIQ ;Move all messages from NI to Scheduler queue
MSGNXT: OPSTR <SKIPN T2,>,HNSCQ,(HN);Get first element on the scheduler Q
CALLRET LAMUX ;No more so call the slot multiplexor
OPSTR <SKIPN T3,>,UELW1,(T2);Get new head or queue if any
STOR T3,HNSCQ,+1(HN) ;None, so clear the queue header tail pointer
STOR T3,HNSCQ,(HN) ;Set new queue header forward pointer
SETZRO UELW1,(T2) ;Clear link word
LOAD T1,UNCBA,+UNB.OF(T2)
CAIE T1,NU.XMT ;Is this a transmit complete?
IFSKP. ;Yes...
CALL XMTDON ;Go do scheduler level transmit done stuff
JRST MSGNXT ; and continue with next message
ENDIF.
MOVE RB,T2 ;Message address obtained
SKIPE T1,UN.SPI+UNB.OF(RB);Was there an error?
JRST MSGDON ;Re-post and ignore
OPSTRM <AOS>,HCRCV,(HN) ;Increment count of received messages
OPSTR <ILDB W1,>,UNBFA,+UNB.OF(RB);Get the message type from the buffer
OPSTR <ILDB T1,>,UNBFA,+UNB.OF(RB);Get number of slots in message
MOVEM T1,NSLOTS
MOVX T1,-2 ;Reduce the residual byte count by 2 for
OPSTRM <ADDM T1,>,UNBSZ,+UNB.OF(RB); type and slots fields
CALL LAG2BY ;Get the destination ID from msg (2 bytes)
MOVEM T1,MSGDID
CALL LAG2BY ;Get the source id from the msg
MOVEM T1,MSGSID
CALL LAG2BY ;Get the ACK/SEQ field from msg
MOVEM T1,MSGACK
MOVE T1,W1
LSH T1,-2 ;Shift off the M and RRF bits
CAIL T1,MINMTY ;Range check message type
CAILE T1,MAXMTY ;...
IFNSK.
BUG. (CHK,LATIMT,LATSRV,SOFT,<LAT Illegal Message Type>,<<T1,MSGTYP>>,<
Cause: The LAT virtual circuit message was received with a message type out
of range.
Data: MSGID - Message type
>)
ELSE.
TRNN W1,2 ;Test the Master/Slave bit
JRST MSGDON ;This a message from a host.
CALL @MSGDSP-MINMTY(T1) ;Dispatch to process the message
ENDIF.
MSGDON: CALL RELRBF ;Ignore for now
JRST MSGNXT
MIN. (MINMTY,<MT.RUN,MT.STA,MT.STP>) ;Minimum message type code
MAX. (MAXMTY,<MT.RUN,MT.STA,MT.STP>) ;Maximum message type code
MSGDSP: BLOCK <MAXMTY-MINMTY+1>
LHDSP. (MSGDSP,MT.RUN-MINMTY,HMRUN) ;RUN message received
LHDSP. (MSGDSP,MT.STA-MINMTY,HMSTRT) ;START message received
LHDSP. (MSGDSP,MT.STP-MINMTY,HMSTOP) ;STOP message received
;MOVNIQ - Move all messages on the NI queue to the Scheduler queue
;
;Call: T1/ Pointer to head of NIQ
; T2/ Pointer to tail of NIQ
; CALL MOVNIQ
; Normal return
;
;Uses: T3,T4
MOVNIQ:
CHNOFF NIPIA ;Turn off NI interrupts
DMOVE T1,HN.NIQ(HN) ;Get the header contents
SETZM HN.NIQ(HN) ;Clear the queue begin pointer
SETZM HN.NIQ+1(HN) ;Clear the end pointer
CHNON NIPIA ;Turn NI back on
OPSTR <SKIPN T3,>,HNSCQ,+1(HN);Is there anything on the queue?
IFSKP. ;YES
STOR T1,UELW1,(T3) ;Add new elements at the queue tail.
ELSE. ;NO
STOR T1,HNSCQ,(HN) ;New queue header forward pointer
ENDIF.
STOR T2,HNSCQ,+1(HN) ;New queue header tail pointer.
RET
SUBTTL LATLSC - Ethernet Link State Change Callback
;LATLSC - Process an asynchronous link state change
;
;Call: T1/ NU.RCI
; T2/UN block address
; Normal return
;
LATLSC: MOVX T3,HNRUN
ANDCAM T3,HN.FLG(HN) ;Assume NI is up
TMNN UNRUN,(T2) ;Is the NI running?
IORM T3,HN.FLG(HN) ;No
RET
SUBTTL Message Receiver - HMSTRT
;HMSTRT - Process a Received START Message
;
;Call: RB/ Address of Message Block
; CALL HMSTRT
; Error Return - error processing completed, message processing aborted.
; Normal Return
HMSTRT: TMNN HNCIP,(HN) ;If the START message template is locked
SKIPN MSGSID ;or source's message handle is 0
RET ; ignore since server will persist.
LOAD T1,HNNAC,(HN) ;If the addition of this circuit brings total
OPSTR <CAML T1,>,HNMAC,(HN); over the maximum number of active circuits
;**; [7234] Change 1 line at HMSTRT:+5 HMP 24-Jan-86
JSP T2,NOCRE0 ;[7234] then reject it.
CALL HSTRCB ;Find the CB associated with this circuit.
RET ;None. Error action already taken.
LOAD T1,HNLAS,(HN) ;If LAT access state is not ON,
CAIE T1,LS.ON ;then
CALLRET LCLHLT ;stop the circuit.
CALL GETXBH ;Get the necessary number of transmit buffer
SKIPA ; headers (+MSD pointers)
CALL GETRBF ;Go see if we need more receive buffers
JSP T2,NOCRES ;Could not get the necessary buffer quota
LOAD T1,CBSTA,(CB) ;Get the current circuit state
CAIN T1,CS.RUN ;If the state is running,
CALL RELSBS ; release all current slots before continuing
CALL CBINIT ;Initialize all host CB parameters
RET ;START message format bad. Error action done.
CALL MTTSTR ;Send a START message
MOVEI T1,CS.STA ;Put the circuit into the
STOR T1,CBSTA,(CB) ; STARTING state.
RET ;Return the receive buffer.
SUBTTL HSTRCB
;HSTRCB - Find the circuit block for a received START msg on a LAT host.
;
;Call: RB/ address of received message block
; CALL HSTRCB
; Error Return - CB not found
; Normal Return
; CB/ Circuit Block address
HSTRCB: XMOVEI T1,HN.QIC(HN) ;Search the inactive CB queue first
CALL CMNIAD ;Look for NI address match
SKIPA ;Not found on the inactive CB queue
JRST CBIFND ;Correct CB found on inactive CB queue
NFND1: XMOVEI T1,HN.QAC(HN) ;Not on inactive Q, try active Q
CALL CMNIAD ;Look for NI address match
SKIPA ;Not on active queue either
JRST CBAFND ;Active CB has been found
NFND2: LOAD T2,HNNAC,(HN) ;Get number of currently active CBs
OPSTR <CAML T2,>,HNMXC,(HN) ;Compare with maximum allowed
IFSKP. ;Not at maximum number of CBs allowed
MOVEI T1,CC.LST ;The number of words to get for a CB
CALL MMGTZW ;Go get them
JSP T2,NOCRES ;Failed
MOVE CB,T1 ;This is the new CB address
MOVEI T1,CS.HLT ;Don't assume that the halted state
STOR T1,CBSTA,(CB) ; is zero.
OPSTRM <AOS>,HNNCC,(HN);Increment number of allocated CBs.
JRST CBALNW ;Allocated new CB successfully
ENDIF.
OPSTR <SKIPN CB,>,QLBWD,+HN.QIC(HN);Check inactive Q for free CB
JSP T2,NOCRES ;None, so can't reuse an inactive CB
CBIFND: MOVE T2,CB ;(T1)Remove from inactive CB queue
CALL LAUNQ
CBALNW: CALL CBGNIX ;Get next assignable index for the CB
XMOVEI T1,HN.QAC(HN) ;Put at the front of the active
MOVE T2,CB ; CB
CALL LAQUE ; queue
OPSTRM <AOS>,HNNAC,(HN) ;New active circuit. Count it.
SETONE CBSTA,(CB) ;Set state to non-HALTED since now active
OPSTRM <AOS>,CCRCV,(CB) ;Increment per server count
OPSTR <DMOVE T1,>,UNSAD,+UNB.OF(RB);Move the source NI address from
OPSTRM <DMOVEM T1,>,CBDNI,(CB) ; message to the CB
CBAFND: RETSKP ;Return success
SUBTTL CBINIT - Circuit Block Initialization
;
;CBINIT - Initialize a Circuit Block from the Contents of a START Message
;
;Call: CB/ Address of Circuit Block
; RB/ Address of Message Block
; CALL CBINIT
; Error Return - START Message content in error.
; Normal Return
CBINIT: MOVEI T1,MSTMSI ;Check to see if the message is at least
OPSTR <CAMLE T1,>,UNBSZ,+UNB.OF(RB); the minimum size for a START msg
JSP T2,ILLMES ;No, too short.
SETZM CLRBEG(CB) ;Clear the region which must be initialized
MOVEI T1,<CLREND-CLRBEG>; to zero when a circuit block is
XMOVEI T2,CLRBEG(CB) ; re-used.
XMOVEI T3,CLRBEG+1(CB) ; ...
XBLT. T1 ; ...
MOVE T1,MSGSID ;Move source's circuit ID from message
STOR T1,CBRID,(CB) ; to circuit block
CALL LAG2BY ;Get the maximum transmit frame size which
STOR T1,CBMTF,(CB) ; the remote will allow
OPSTR <ILDB T1,>,UNBFA,+UNB.OF(RB);LAT protocol version used by remote
CAIL T1,LALPV ;Check if in the range of version supported
CAILE T1,LAHPV ; by this node
JSP T2,LVSKEW ;Out of range, return error
OPSTR <ILDB T2,>,UNBFA,+UNB.OF(RB);Remote's protocol ECO level
LSH T2,^D9 ;Shift protocol version
IOR T1,T2 ;OR version and ECO level
STOR T1,CBRPV,(CB) ; ; and store as single unit
OPSTR <ILDB T1,>,UNBFA,+UNB.OF(RB);Maximum number of slots in VC message
STOR T1,CBMSL,(CB) ; permitted by remote
OPSTR <ILDB T1,>,UNBFA,+UNB.OF(RB);Number of additional receive buffers
STOR T1,CBNBF,(CB) ; queued by remote for this circuit
OPSTR <ILDB T1,>,UNBFA,+UNB.OF(RB);Remote's circuit timer value
STOR T1,CBCTI,(CB) ;
OPSTR <ILDB T1,>,UNBFA,+UNB.OF(RB);Remote's keep-alive timer value
STOR T1,CBKTI,(CB) ;
IMULI T1,^D2000 ;Convert to ms and multiply by 2 (fudge factor)
STOR T1,CBKAV,(CB) ;and store in keep alive value field.
MOVX T1,-^D6 ;Decrement residual message count by what we
OPSTRM <ADDM T1,>,UNBSZ,+UNB.OF(RB); have read so far.
CALL LAG2BY ;Get the "facility number"
STOR T1,CBNUM,(CB)
CALL LAG2BY ;Get the product type code
STOR T1,CBPTC,(CB)
MOVEI T1,0 ;Skip the circuit name
CALL GTCSTR
JSP T2,ILLMES ;Illegally formatted message
MOVEI T1,ML.SYS ;Maximum length of system's name string
XMOVEI T2,CB.SNM(CB) ;Where copy the name string
TXO T2,<OWGP. 7,0>
CALL GTCSTR
JSP T2,ILLMES ;Illegally formatted message
STOR T1,CBRSC,(CB) ;Save the length of the name string
MOVEI T1,ML.LOC ;Maximum length of the system's location string
XMOVEI T2,CB.LOC(CB) ;Where to copy the location string
TXO T2,<OWGP. 7,0>
CALL GTCSTR
JSP T2,ILLMES ;Illegally formatted message
STOR T1,CBRLC,(CB) ;Save the length of the location string
RETSKP
SUBTTL CMNIAD - Find CB base on NI address
;CMNIAD - search the CBs on a CB queue looking for one which has the same
; NI address as the source NI address in the incoming message.
;
;Call: T1/ Queue header of CB queue to search
; RB/ Address of the circuit message
; CALL CMNIAD
; Not found return
; Success return
; T1/ unchanged
; CB/ circuit block address if found, 0 otherwise
CMNIAD: LOAD CB,QLFWD,(T1) ;Get the first queue entry
CMLOOP: JUMPE CB,RTN ;Is this last entry?
LOAD T3,CBDNI,(CB) ;First 4 bytes of remote NI address from CB
LOAD T4,CBDNI,+1(CB) ;Last 2 bytes
OPSTR <CAMN T3,>,UNSAD,+UNB.OF(RB);Compare with message destination adr
OPSTR <CAME T4,>,UNSAD,+<UNB.OF+1>(RB) ;...
IFNSK.
LOAD CB,QLFWD,+CB.LNK(CB); Get next forward CB
JRST CMLOOP ;Try again
ENDIF.
RETSKP ;Return success
;
;CBGNIX - Get the next assignable index for a CB
;
;Call: CB/ address of circuit block
; CALL CBGNIX
; Normal Return
;
; This routine is called each time a CB is to be used for a new LAT
; virtual circuit. The old index vector (CBVECT) pointer to the CB
; is deleted and a new index is generated.
CBGNIX: MOVE W1,CBVECT ;Get the address of the CB index vector
OPSTR <SKIPN T2,>,CBLID,(CB);Get the old circuit index, if any.
IFSKP.
ADD T2,W1 ;Get the address of the pointer to this CB
SETZM (T2) ; in the CB index vector and clear it.
ENDIF.
LOAD T2,HNNXI,(HN) ;Get the next available index to assign
STOR T2,CBLID,(CB) ;Set the new index in the CB
MOVE T1,W1 ;Address of teh CB index vector
ADD T1,T2 ;Offset into this vector for new index
MOVEM CB,(T1) ;Set the new pointer to point to new CB
CBGNX0: AOS T2 ;Increment the next available index
AOS T1 ; and the corresponding index vector pointer
CAIG T2,CBMAXI ;Time to wrap around?
IFSKP. ;Yes
MOVEI T2,1 ;Always start at 1
MOVE T1,W1
ENDIF.
SKIPE (T1) ;Is this vector entry free?
JRST CBGNX0 ;No, try next
STOR T2,HNNXI,(HN) ;Store new "next assignable index"
RET
SUBTTL HMRUN
;HMRUN - Process a Host RUN Message
;
;Call:
; CALL HMRUN
; Error return
; Normal return
HMRUN: CALL HRUNCB ;Get the circuit block address
RET ;None, error action already comleted
SKIPE T2,MSGDID ;Destination and source circuit IDs from
SKIPN T1,MSGSID ; the message may not be zero
JSP T2,ILLMES ;If so, it is illegal
LOAD T3,CBRID,(CB) ;Get the remote's circuit index from the CB
LOAD T4,CBLID,(CB) ; and our circuit index from the CB must match
CAMN T1,T3 ; the source id and
CAME T2,T4 ; the destination id from the msg.
JSP T2,INVRUN ;Invalid RUN msg, go terminate the circuit.
MOVE T1,TODCLK ;Get current time
STOR T1,CBKAT,(CB) ;Save time for keep-alive process
MOVEI T1,CS.RUN ;Put in RUNNING state if not there already
STOR T1,CBSTA,(CB) ;Store state in CB
MOVE T1,MSGACK ;Get the SEQ/ACK number
MOVE W1,T1 ;
ANDI T1,377 ;Received message sequence number
LSH W1,-^D8 ;Last message ack'd by remote
LOAD T3,CBRSQ,(CB) ;Previous recv SEQ number
AOS T3 ;Increment
ANDI T3,377 ;Modulo 256
CAME T1,T3 ;Is is the expected sequence number
IFSKP.
STOR T1,CBRSQ,(CB) ;Update expected sequence number for next time
ELSE.
SETZM NSLOTS ;No, ignore any slots in this message
OPSTRM <AOS>,HCSEQ,(HN);Increment Host's count
OPSTRM <AOS>,CCSEQ,(CB);Increment per-server count
ENDIF.
LOAD T3,CBLRA,(CB) ;Previous "last ACK from remote"
STOR W1,CBLRA,(CB) ;New "last ACK from remote"
CAMGE W1,T3 ;Is new ACK less than old ACK?
ADDI W1,^D256 ;Yes, new ACK has wrapped around
SUB W1,T3 ;Number of messages ACK'd by this msg
CAILE W1,MAXXBF ;Range check it and if out of range
JSP T2,ILLMES ; treat as an illegal message
SKIPN W1 ;If anything got ACK'd
IFSKP.
SETZRO CBRTC,(CB)
ENDIF.
NXTACK: JUMPE W1,ACKDON ;No new messages ACK'd
MOVE XB,CB.AKQ(CB) ;Sneak look at buffer at head of Q
CALL RELXBF ;Free large MSD buffer.
XMOVEI T1,CB.AKQ(CB) ;Unqueue the now acknowledged buffers
CALL UNQ1WF ; from the ACK wait queue
JSP T2,ILLMES ;Should not happen
XMOVEI T1,CB.XBQ(CB) ;Queue them back to the transmit buffer
CALL QUE1WB ; queue.
SOJA W1,NXTACK
ACKDON: OPSTR <SKIPN>,CBAKQ,(CB);If all messages ack'd
SETZRO CBTIM,(CB) ; clear the circuit timer.
SETONE CBMRS,(CB) ;Indicate we must respond to this msg "soon"
CALL LSDMUX ;Go process all slots in the RUN message
IFNSK. ;Invalid slot type returned.
BUG. (INF,LATIST,LATSRV,SOFT,<LAT Illegal Slot Type>,<<T2,SLTID>>,<
Cause: LAT Slot received with Slot type out of range.
Data: SLTID - Slot ID
>)
MOVEI T1,CE.ILL ;Set up stop reason code.
CALL MTTSTP ;Illegal slot, kill the circuit
ENDIF.
RET ;All slots processed, return receive buffer
SUBTTL HSTRCB
;
;HRUNCB - Find the circuit block for a received RUN/STOP msg on a LAT host.
;
;Call: RB/ address of received message block
; CALL HRUNCB
; Error Return - CB not found
; Normal Return
; CB/ Circuit Block address
;
HRUNCB: SKIPN CB,MSGDID ;Index to CB from received message
JSP T2,ILLMS0 ;Zero message destination index is illegal
CAIG CB,CBMAXI ;If CB index is greater than our max
IFSKP.
SETZ CB, ;it's also illegal, so flag no circuit
JSP T2,ILLMS0 ;and go send a stop message
ENDIF.
ADD CB,CBVECT ;Add address of vector of pointers to CBs
SKIPN CB,(CB) ;The real circuit block address
JSP T2,INVRUN ;Circuit probably went away.
OPSTR <DMOVE T3,>,CBDNI,(CB);All 6 bytes of remote NI address from CB
OPSTR <CAMN T3,>,UNSAD,+UNB.OF(RB);Compare with message destination adr
OPSTR <CAME T4,>,UNSAD,+<UNB.OF+1>(RB) ;...
SKIPA ;Not the right CB
JRST HRNFND ;Found the CB
XMOVEI T1,HN.QAC(HN) ;Try searching the active Q
CALL CMNIAD
SKIPA ;Not there either
JRST HRNFND ;Found the CB
XMOVEI T1,HN.QIC(HN) ;Try searching the inactive Q
CALL CMNIAD
JSP T2,ILLMES ;Non-existent CB. Treat as illegal message.
HRNFND: OPSTRM <AOS>,CCRCV,(CB) ;Increment per-server count
RETSKP ;Found the CB
SUBTTL HMSTOP
HMSTOP: CALL HRUNCB ;Get the CB for this STOPS message
RET ;None, error action already done
SKIPE MSGSID ;Is the source ID in MSG non-zero?
JSP T2,ILLMES ;Yes, that's not legal
LOAD T1,CBLID,(CB) ;Get our remote ID for circuit. It must be
LOAD T2,CBSTA,(CB) ;Current circuit state
;**;[7481] Change 1 line at HMSTOP: + 6 L JDM 15-May-87
CAIE T2,CS.HLT ;[7481]Is it halted or
CAME T1,MSGDID ; an invalid STOP message?
;**;[7481] Replace 3 lines with 3 at HMSTOP: + 9. L JDM 15-May-87
RET ;[7481]Yes, just ignore it
CALLRET CBKILL ;[7481]Else, release all CB resources and
;[7481] put on inactive Q
; Routines to terminate a circuit because of some error. T1 contains
; the error to be entered into the STOP message.
ILLMES: OPSTRM <AOS>,CCIMR,(CB) ;Increment per-server count
ILLMS0: OPSTRM <AOS>,HCIMR,(HN) ;Increment host count
MOVEI T1,CE.ILL ;Illegally formatted message received
JRST INFSTP ;Join common code to kill off circuit
LVSKEW: MOVEI T1,CE.SKW ;Version skew between server and host,
JRST INFSTP ; cannot support connection.
NOCRES: OPSTRM <AOS>,CCIMR,(CB) ;Increment per-server count
NOCRE0: OPSTRM <AOS>,HCIMR,(HN) ;Increment host count
MOVEI T1,CE.RES ;Insufficient resources to support new circuit.
JRST INFSTP
XMTLIM: MOVEI T1,CE.LIM ;Retransmit limit exceeded. Server probably
JRST INFSTP ; has gone away.
IDLHLT: MOVEI T1,CE.NSL ;Circuit halted because there are no more slots
JRST MTTSTP
LCLHLT: MOVEI T1,CE.HLT ;Circuit halted by local system. Either stopped
JRST MTTSTP ; by operator or last slot has disconnected.
NIHALT: MOVEI T1,CE.NIH ;NI halted
SETZ T2,0 ;PC meaningless
JRST INFSTP
INVRUN: MOVEI T1,CE.INV ;Invalid message
JRST INFSTP
;**;[7369] Add one line at INFSTP: + 0 L JDM 25-SEP-86
INFSTP: OPSTR <DMOVE T3,>,CBDNI,(CB) ;[7369]GET ADDRESS IN T3 AND T4
;**;[7369]Change BUG. macro at INFSTP: + 1 L JDM 25-SEP-86
BUG. (INF,LATNSC,LATSRV,SOFT,<LAT Host node stopped circuit>,<<T1,CODE>,<T2,PC>,<T3,HIADDR>,<T4,LOADDR>>,<
Cause: LAT Host node stopped the circuit.
Action: Look at the Reason Code in T1 and the PC in T2. This error, if
relatively infrequent is nothing to be concerned about. If it occurs
frequently, use the CODE and PC to determine further action.
HIADDR and LOADDR specify the Ethernet address of the remote
server whose circuit has been stopped.
Data: CODE - Reason code
PC - PC
HIADDR - High order 32 bits of Ethernet address
LOADDR - Low order 16 bits of Ethernet address
>) ;[7369]
JRST MTTSTP
SUBTTL Message Transmit Routines
;MTTSTR - transmit a START message
;
;Call: CALL MTTSTR
; Normal Return
;
; This routine builds the START message header in the template from the host
; node data base and transmits it. It sets the interlock so that the template
; cannot be changed at process level by the LATOP% JSYS. The message count
; is not changed since it is already correct (hence LAP2B0 is called instead of
; LAP2BY). Cannot fail after this point since sending a STOP will clobber
; the START msg template.
MTTSTR: SETONE HNCIP,(HN) ;Set interlock on the msg template
XMOVEI XB,HN.SMT(HN) ;Address of start message template
MOVX T1,<POINT 8,<SBF.OF>(XB)>;Set pointer to the message header
STOR T1,UNBFA,+UNB.OF(XB); for BMSGHD.
MOVEI T1,<MT.STA_2> ;Build a START
CALL BMSGHD ; message header
XMOVEI T1,<SBF.OF>(XB) ;Build the one word global
TLO T1,^D44_^D12 ; byte pointer.
STOR T1,UNBFA,+UNB.OF(XB);
OPSTR <DMOVE T1,>,CBDNI,(CB);
OPSTRM <DMOVEM T1,>,UNDAD,+UNB.OF(XB);
LOAD T1,HNPID,(HN) ;Get the Portal ID for NISRV
STOR T1,UNPID,+UNB.OF(XB)
MOVX T1,NU.XMT ;Go transmit but don't
XMOVEI T2,UNB.OF(XB) ; use the usual routine
CALL DLLUNI ; ...
IFSKP.
OPSTRM <AOS>,HCXMT,(HN);Increment host count
OPSTRM <AOS>,CCXMT,(CB);Increment per-server count
ELSE.
SETZRO HNCIP,(HN) ;Release the lock
ENDIF.
RET
;**;[7481] Add routine CBKILL at MTTSTR: + 26. L JDM 15-May-87
;[7481]
;CBKILL - Kill a circuit by releasing all slots and buffers
;
;Call: CB/ address of the circuit block
; CALL CBKILL
;Returns: +1 Always
CBKILL: CALL RELSBS ;(CB/)Release all slots asssociated with CB
CALL RFXBFS ;(CB/) Release all buffers on
CALL MDLXBF ;(CB/) free queue and mark all those in DLL
; CALLRET CBDACT ;and move CB to the inactive queue
;CBDACT - Deactivate CB by moving to inactive queue
;
;Call: CB/ address of the circuit block
; CALL CBDACT
; Normal return
CBDACT: JUMPE CB,RTN ;If there is no CB, don't do the following
SETZRO CBRID,(CB) ;Clear remote circuit index
MOVEI T1,CS.HLT ;If the current circuit state is not halted
OPSTR <CAMN T1,>,CBSTA,(CB); move CB from active to inactive queue
RET ; otherwise CB is already on inactive queue
STOR T1,CBSTA,(CB) ;Set the state to halted now
XMOVEI T1,HN.QAC(HN) ;Remove
MOVE T2,CB ; the circuit block
CALL LAUNQ ; from the active queue
XMOVEI T1,HN.QIC(HN) ; and queue to
MOVE T2,CB ;Need the CB address again.
CALL LAQUE ; the inactive queue
OPSTRM <SOS>,HNNAC,(HN) ;Reduce the number of active circuits
RET
;MDLXBF - Remove all buffers from ACK Wait queue, and mark them
; for deletion at transmit complete.
;
;Call: CB/ circuit block address
; CALL MDLXBF
; Normal return
;
MDLXBF: SETZRO CBDLL,(CB) ;No buffers in DLL now
MDLXB1: XMOVEI T1,CB.AKQ(CB) ;Address of the ACK wait queue
CALL UNQ1WF ;Unqueue next buffer on Q
RET ;Done
MOVEI T1,0 ;Mark buffer for freeing at xmit done
EXCH T1,UN.UID+UNB.OF(T2) ;and get current "DLL" flag
JUMPL T1,MDLXB1 ;If in DLL, it will be freed at XMTDON
MOVE XB,T2 ; else we have to free it now.
CALL RELXBH
JRST MDLXB1
;MTTSTP - transmit a STOP message ;
;Call: T1/ stop reason code
; XB/ address of transmit buffer
; RB/ address of recieve buffer
; CB/ address of circuit block (may be 0)
; CALL MTTSTP
; Normal return
;
MTTSTP: MOVEM T1,STPCOD ;Save the stop reason.
JUMPE CB,MTTSP0 ;If there is not CB, just send stop msg.
STOR T1,CBERR,(CB) ;Store reason for the stop in the CB
LOAD T1,CBRID,(CB) ;Get the id to which to send the STOP
MOVEM T1,MSGSID ; and put where we want it below
;**;[7481] Replace 4 lines with 2 at MTTSTP: + 5 L JDM 15-May-87
CALL CBKILL ;[7481](CB/)Else, release all CB resources and
;[7481] put on inactive Q
;
; Here to actually send a stop message
; Always get a temp xmit buffer.
; Then send the message with a 0 in UNUID so that
; XMTDON will always just release the buffer.
;
MTTSP0: MOVX T1,HNRUN ;If the NI
TDNE T1,HN.FLG(HN) ; is no longer running
RET ;We're done.
MOVEI T1,SZMSTP ;There will be no buffers so get one
CALL MMGTZW
RET ;Couldn't. Assume we did.
MOVE XB,T1 ;Transmit buffer for STOP message
MOVX T1,<POINT 8,<XBF.OF>(XB)>;Byte pointer to start of msg
STOR T1,UNBFA,+UNB.OF(XB);Store byte ptr to use building STOP msg
MOVEI T1,MT.STP_2 ;Message type (STOP) and number of slots (=0)
CALL LAP2B0 ; to message
MOVE T1,MSGSID ;Get the source ID from the received message
CALL LAP2B0 ; and enter as destination ID to msg to send.
MOVEI T1,0 ;Get a 0 source ID
CALL LAP2B0 ; and enter into msg to send
CALL LAP2B0 ;Ack and sequence number must be zero also.
MOVE T1,STPCOD ;Enter Disconnect reason and Reason text byte
CALL LAP2B0 ; (=0 since text field not used) to msg.
XMOVEI T1,<XBF.OF>(XB) ;Set up 1 word global byte pointer
TLO T1,(<OWGP. 8,0>) ; to the transmit data for NISRV
STOR T1,UNBFA,+UNB.OF(XB); and store in UN block
MOVEI T1,MINXBF ;Initialize to zero
STOR T1,UNBSZ,+UNB.OF(XB); the message count
CALLRET XMTMSN ;Go give the message to the DLL.
; It will be freed at XMTDON
;MTTRUN - transmit a RUN message
;Call: XB/ address of the transmit buffer
; CALL MTTRUN
; Normal return
MTTRUN: JUMPE XB,RTN ;No message to transmit
XMOVEI T1,CB.XBQ(CB) ;Unqueue the transmit buffer
CALL UNQ1WF ; from the free Q
NOP ;Would not be here if queue empty.
OPSTR <SKIPE>,CBXBQ,(CB);Is this our last transmit buffer?
IFSKP.
SETONE CBRRF,(CB) ;Yes, set the reply requested flag
LOAD T1,HNTIM,(HN) ;Value for circuit timer
ADD T1,TODCLK ;Plus current time
STOR T1,CBTIM,(CB) ;Store in circuit timer
ENDIF.
XMOVEI T1,CB.AKQ(CB) ; and queue to the end
CALL QUE1WB ; of the ACK queue
LOAD T1,CBTSQ,(CB) ;Get the transmit sequence number
AOJ T1, ; and increment it by one before
STOR T1,CBTSQ,(CB) ; using it in the next transmitted msg.
MOVX T1,<POINT 8,<XBF.OF>(XB)>;Set message pointer to point to
STOR T1,UNBFA,+UNB.OF(XB); the RUN message header.
MOVEI T1,MT.RUN_2 ;Message type for the header.
CALL BMSGHD ;Build the message header
MOVEI T1,SZ.MHD ;Store the message header length
OPSTR <SKIPN>,MDNXT,+MDB.OF(XB); which if there is no slot data
MOVEI T1,MINXBF ; must be the minimum NI datagram size.
STOR T1,MDBYT,+MDB.OF(XB); in the appropriate place
SETZRO UNBSZ,+UNB.OF(XB);MBZ for MSD type transmits
XMOVEI T1,<MDB.OF>(XB) ;Address of the first MSD block
STOR T1,UNBFA,+UNB.OF(XB);stored where usually byte pointer goes.
CALL XMTMSG ;No, go transmit a single buffer XB
RET
;TMRCHK - Host circuit timer check routine. This routine performs actions
; base on the state of the circuit timer.
;Call: CB/ circuit block address
;Return:
; RET - no further action required for this circuit
; RESKSP - continue processing
TMRCHK: OPSTR <SKIPN T1,>,CBTIM,(CB);Is the circuit timer running?
RETSKP ;No, continue processing circuit
SUB T1,TODCLK ;Account for current time
SKIPL T1 ;Any time still left?
IFSKP. ;Circuit timer has expired.
LOAD T1,HNRLI,(HN) ;Get the retransmit limit.
OPSTR <CAMG T1,>,CBRTC,(CB);Have we reached the limit?
IFSKP. ;No, so
CALL XUNAKQ ; retransmit the unack queue
LOAD T1,HNTIM,(HN) ; and reset the timer
ADD T1,TODCLK ; from now.
STOR T1,CBTIM,(CB) ;Restore reset timer to CB
ELSE.
JSP T2,XMTLIM ; otherwise, terminate the circuit
ENDIF. ; cause communication broken with remote.
RET
ENDIF.
RETSKP
;XUNAKQ - Transmit all messages on the unacknowledged queue
XUNAKQ: OPSTR <SKIPN>,CBDLL,(CB);Don't retransmit if already transmitting
OPSTR <SKIPN XB,>,QLFWD,+CB.AKQ(CB) ;First msg to retransmit
RET ;Should be
OPSTRM <AOS>,HCRTR,(HN) ;Increment host count
OPSTRM <AOS>,CCRTR,(CB) ; and per-server count
OPSTRM <AOS>,CBRTC,(CB) ;Increment retransmit count
XMTALL: OPSTRM <AOS>,CBDLL,(CB) ;Increment buffers in DLL
MOVX T1,NU.XMT ;Transmit function
XMOVEI T2,UNB.OF(XB) ;UN block
CALL DLLUNI
IFNSK.
OPSTRM <SOS>,CBDLL,(CB)
ENDIF.
SKIPE XB,UE.LW0(XB) ;Next XB on queue to (re)transmit
JRST XMTALL ;Still more, continue to give buffers to DLL
RET
; BMSGHD - Build a LAT Virtual Circuit Message Header
;Call: T1/ <Message type>_2
; XB/ Message buffer address
; CB/ Address of the Circuit Block
BMSGHD: MOVE T2,NSLOTS ;Number of slots in message
LSH T2,^D8 ;Shift to left byte position
IOR T1,T2 ;Or in message type (shifted)
OPSTR <SKIPE>,CBRRF,(CB);If the Reply Request Flag is set
IORI T1,1 ; set it in message header
CALL LAP2B0 ;Enter as 1st 2 bytes of header
LOAD T1,CBRID,(CB) ;Get the remote's circuit index
CALL LAP2B0 ; and enter as 2 byte field
LOAD T1,CBLID,(CB) ;Get our circuit index
CALL LAP2B0 ; and enter as 2 byte field
LOAD T1,CBRSQ,(CB) ;ACK number
LSH T1,^D8 ;Shift to left byte position
LOAD T2,CBTSQ,(CB) ;Send Seq Number
ANDI T2,377 ;Modulo 256
IOR T1,T2
CALL LAP2B0
RET
SUBTTL Message Transmitter -- XMTMSG
;
;XMTMSG - Transmit a LAT Message
;
;Call: CB/ 0 or Circuit Block Address
; XB/ Address of the UN block/Transmit Buffer
; RB/ Address of Receive Buffer if XB/0
; UNBSZ/ Message byte count
; CALL XMTMSG
; Normal Return
;
; This routine sets up the UN block for NISRV and issues the transmit
; function. Only UNBSZ must be set by the caller. If there is no CB,
; the information is taken from the receive buffer, otherwise from the
; circuit block.
;
;If there is no possibility of an ACK (such as sending a STOP message),
; then call XMTMSN, which will set UNUID to 0 so that the buffer will
; just be returned to free memory after NISRV has sent it.
;
XMTMSN: TDZA T1,T1 ;Enter here if you just want to free the buffer
; when transmit is done.
XMTMSG: MOVE T1,CB
TLO T1,DLL.FL ;set "buffer-in-DLL" flag
STOR T1,UNUID,+UNB.OF(XB);Save the CB address for completion action
JUMPE CB,XMNOCB ;Case with no assigned circuit block
LOAD T1,HNPID,(HN) ;Portal ID
OPSTR <DMOVE T2,>,CBDNI,(CB) ;Get destination NI adr from CB
OPSTRM <AOS>,CBDLL,(CB) ;Increment # buffers in the DLL
JRST XMTMS0 ;Go do common code
XMNOCB: LOAD T1,UNPID,+UNB.OF(RB);Get the portal ID
OPSTR <DMOVE T2,>,UNSAD,+UNB.OF(RB) ;Source NI address from recvd msg
XMTMS0: STOR T1,UNPID,+UNB.OF(XB);Store in xmit buffer
OPSTRM <DMOVEM T2,>,UNDAD,+UNB.OF(XB) ; to the xmit buffer
STOR XB,UNRID,+UNB.OF(XB);Remember the buffer address
MOVEI T1,UNA.EV
STOR T1,UNADS,+UNB.OF(XB);Tell NISRV we are using EXEC virtual memory
MOVX T1,NU.XMT ;NI transmit function code
XMOVEI T2,UNB.OF(XB) ;UN block address
CALL DLLUNI
IFSKP.
OPSTRM <AOS>,HCXMT,(HN)
JUMPE CB,RTN
OPSTRM <AOS>,CCXMT,(CB)
ELSE.
MOVSI T1,DLL.FL ;get "buffer-in-DLL" flag
ANDCAB T1,UN.UID+UNB.OF(XB) ;clear it in message
SKIPN T1
CALL RELXBH
JUMPN CB,RTN
OPSTRM <SOS>,CBDLL,(CB);Failed so put back count where is was
ENDIF.
RET
SUBTTL Message Transmitter -- XMTDON
;XMTDON - Message Transmitter Transmit Done Scheduler Level Routine
;
;Call: T1/ NU.XMT
; T2/ UN block address
; CALL XMTDON
; Normal return
;
; If the UNRID is zero, there is no longer a CB for this buffer because the
; circuit went away and we don't care what happens at transmit complete. Just
; release the buffer. If the CB state is stopping, complete the stopping of
; the circuit which could not be done earlier because all xmit buffers were in
; the DLL.
XMTDON: SAVEAC <CB>
MOVE XB,T2 ;Move transmit buffer adr to conventional AC.
LOAD CB,UNUID,+UNB.OF(T2);Get the CB address
TLZ CB,DLL.FL ;Clear the "buffer-in-DLL" flag
STOR CB,UNUID,+UNB.OF(T2); and store back this way
JUMPE CB,RELXBH ;If there is no CB, release buffer and header and return
OPSTRM <SOS>,CBDLL,(CB) ;One less buffer in the DLL
RET
SUBTTL Receive Message Handling Routines
;LAG2BY - obtains two bytes from the message which is assumed to be a 16-bit
; quantity.
;
;Call: MA/ Message base address
; CALL LAG2BY
; Normal Return
;Changes T2
; T1/ 16-bit quantity
LAG2BY: MOVX T1,-2 ;Amount to decrement the count by
OPSTRM <ADDM T1,>,UNBSZ,+UNB.OF(RB);Update message count
OPSTR <ILDB T1,>,UNBFA,+UNB.OF(RB);Get low order byte
OPSTR <ILDB T2,>,UNBFA,+UNB.OF(RB);Get high order byte
LSH T2,^D8 ;Shift high order byte left
IOR T1,T2 ;Make a 16-bit quantity
RET ;Return with result
;GTCSTR - Move Counted String from a Message
;
;Call: T1/ Maximum count to move
; T2/ Destination byte pointer for string
; RB/ Message base address
;Changes T1,T2,T3,T4
GTCSTR: SAVEAC <W1,W2> ;Get two work registers
OPSTR <SKIPN T3,>,UNBSZ,+UNB.OF(RB);Byte count left in message
RET ;Return error. Message unexpectedly truncated
OPSTR <ILDB W1,>,UNBFA,+UNB.OF(RB);Count of the counted string
SUBI T3,1(W1) ;Calculate new residual message count
JUMPL T3,RTN ;Message truncated
STOR T3,UNBSZ,+UNB.OF(RB);Store back into message header
SKIPE W1 ;A null string?
IFSKP.
MOVEI T1,0 ;Yes, return zero count
RETSKP ; successfully
ENDIF.
MOVE T3,W1 ;Copy of the actual string count
CAMLE T3,T1 ;Get the minimum of (actual string count,
MOVE T3,T1 ; maximum string count) for copy loop index
MOVEM T3,T1 ; and store as actual count copied
LOAD T4,UNBFA,+UNB.OF(RB);Save initial value of byte pointer
JUMPE T1,GTCDON ;Skipping over this field
GTCSLP: OPSTR <ILDB W2,>,UNBFA,+UNB.OF(RB);Fetch a source byte
IDPB W2,T2 ;Store as destination byte
SOJN T3,GTCSLP ;Loop till all bytes copied
GTCDON: ADJBP W1,T4 ;Adjust byte pointer properly in case less than
STOR W1,UNBFA,+UNB.OF(RB); the full string was copied
RETSKP ;Return success, T1/ count of string fetched
SUBTTL Transmit Message Handling Routines
;LAP2BY - Put 2 bytes to message
;
;Call: XB/ Address of the transmit buffer
; T1/ 16-bit quantity to ouput
; CALL LAP2BY or CALL LAP2B0
; Normal return
;T1 perserved, T2 used
;
; This routine enters a 16-bit quantity as two bytes from T1 into the transmit
; buffer with the least significant entered first. It assumes that UNBFA is
; set up with the proper byte pointer to the message buffer. The alternate
; entry LAP2B0 differs from LAP2BY in that LAP2B0 does not increment the
; message byte count whereas LAP2BY does.
LAP2BY: MOVEI T2,2 ;Amount to increment the message count by
OPSTRM <ADDM T2,>,UNBSZ,+UNB.OF(XB);Update the count in message header
LAP2B0: MOVE T2,T1 ;In order to return T1 preserved.
OPSTR <IDPB T2,>,UNBFA,+UNB.OF(XB);Low order byte entered first
LSH T2,-^D8 ;Shift hi byte into position
OPSTR <IDPB T2,>,UNBFA,+UNB.OF(XB);High order byte goes to b buffer
RET
;
;PTCSTR - put counted string to message buffer
;
;Call: XB/ Address of the transmit buffer
; T1/ Count to enter into buffer
; T2/ Source string byte pointer
PTCSTR: MOVEI T3,1(T1) ;Increment to include count byte
OPSTRM <ADDM T3,>,UNBSZ,+UNB.OF(XB);Increment count in buffer
PTCST0: OPSTR <IDPB T1,>,UNBFA,+UNB.OF(XB);Put the string count to buffer
MOVE T3,T1 ;Save copy of count for decrementing
PTCSTL: JUMPE T3,RTN ;If count exhausted, done with copying
ILDB T4,T2 ;Get the next source string byte
OPSTR <IDPB T4,>,UNBFA,+UNB.OF(XB);Put it to buffer
SOJA T3,PTCSTL ;Continue til string count zero
;
;PTUSTR - put uncounted string to message buffer
;
;Call: XB/ Address of the transmit buffer
; T1/ Count to enter into buffer
; T2/ Source string byte pointer
PTUSTR: OPSTRM <ADDM T1,>,UNBSZ,+UNB.OF(XB);Increment count in buffer
MOVE T3,T1 ;Save copy of count for decrementing
PTUSTL: JUMPE T3,RTN ;If count exhausted, done with copying
ILDB T4,T2 ;Get the next source string byte
OPSTR <IDPB T4,>,UNBFA,+UNB.OF(XB);Put it to buffer
SOJA T3,PTUSTL ;Continue til string count zero
;RBPOST - Return Receive Buffer to DLL
;
;Call: T1/ Message block address
; CALL RBPOST
; Normal Return
;
RBPOST: MOVEI T2,LMRFSI ;Size of the buffer
STOR T2,UNBSZ,+UNB.OF(T1);Store in UN block for NISRV
XMOVEI T2,<SBF.OF>(T1) ;Set up 1 word global byte pointer
TLO T2,^D44_^D12 ; to the transmit data for NISRV
STOR T1,UNRID,+UNB.OF(T1);Store the buffer address for callback
STOR T2,UNBFA,+UNB.OF(T1); and store in UN block
LOAD T2,HNPID,(HN) ;Get the Portal ID for NISRV
STOR T2,UNPID,+UNB.OF(T1)
MOVEI T2,UNA.EV
STOR T2,UNADS,+UNB.OF(T1);Tell NISRV we are using EXEC virtual memory
XMOVEI T2,UNB.OF(T1) ;UN block address
MOVX T1,NU.RCV ;Post receive buffer function code
CALL DLLUNI
IFNSK.
BUG. (CHK,LAPRBF,LATSRV,SOFT,<Specify Receive Buffer Failure>,<<T1,DLLERC>>,<
Cause: LATSRV received an error from NISRV while attempting to post a
receive buffer.
Data: DLLERC - Error code returned by NISRV
>)
RET
ENDIF.
RETSKP
SUBTTL Slot Demultiplexor - LSDMUX
;
;LSDMUX - Process all slots in a received RUN message
;
;Call: RB/ Address of RUN message
; CALL LSDMUX
; Error return - illegal slot encountered
; Normal return
MIN. (MINSTY,<ST.DTA,ST.STA,ST.STP,ST.DTB,ST.ATT,ST.REJ>) ;Minimum slot type code
MAX. (MAXSTY,<ST.DTA,ST.STA,ST.STP,ST.DTB,ST.ATT,ST.REJ>) ;Maximum slot type code
LSDMUX: TRVAR <SLTDID,SLTSID,SLTCNT,SLTTYP,SLTEPT> ;Assign some variables on stack
SKIPN T1,NSLOTS ;Any slots left to process?
RETSKP ;No, return successfully
NXTSLT: OPSTR <ILDB T2,>,UNBFA,+UNB.OF(RB);Get the destination id
MOVEM T2,SLTDID
OPSTR <ILDB T2,>,UNBFA,+UNB.OF(RB);Get the source id
MOVEM T2,SLTSID
OPSTR <ILDB T2,>,UNBFA,+UNB.OF(RB);Get the slot count
MOVEM T2,SLTCNT
LOAD T3,UNBSZ,+UNB.OF(RB);Get the current message count
AOS T1,T2 ;Round up to the nearest even number
TRZ T1,1 ;since they may be 1 pad byte in slot
SUBI T3,SLHDSZ(T1) ;Subtract the total slot size
STOR T3,UNBSZ,+UNB.OF(RB);Store back in msg header as updated msg count
JUMPL T3,ILLSLT ;Error if message has ended prematurely
OPSTR <ILDB T2,>,UNBFA,+UNB.OF(RB);Get the slot type/credits/reason
MOVEM T2,SLTTYP
ADJBP T1,UN.BFA+UNB.OF(RB);Point to next slot
MOVEM T1,SLTEPT ;in case we need to skip later
LSH T2,-4 ;Shift off the credits field
CAIL T2,MINSTY ;Range check slot type
CAILE T2,MAXSTY
CALLRET ILLSLT ;Slot ID out of range, illegal slot
CALL @SLTDSP-MINSTY(T2) ;Dispatch to proper routine
JRST ILLSLT
SOSG NSLOTS ;Indicate one less slot to process
RETSKP ;Count went to zero, so done.
MOVE T1,SLTEPT ;Get pointer to next slot's data
MOVEM T1,UN.BFA+UNB.OF(RB);and force pointer to there
JRST NXTSLT ;Still some left, go do next
;**;[7476] Replace 1 line at SLTDSP+1: 7-MAY-87 RBW
;**;[7476] Change ST.REJ entry to jump to [RET] 7-MAY-87 RBW
SLTDSP: REPEAT <MAXSTY-MINSTY+1>,<
IFIW [RET]> ;[7476]Prevent ILLUUO for undefined slot types
LHDSP. (SLTDSP,ST.DTA-MINSTY,HSDATA)
LHDSP. (SLTDSP,ST.DTB-MINSTY,HSDATB)
LHDSP. (SLTDSP,ST.STA-MINSTY,HSSTRT)
LHDSP. (SLTDSP,ST.ATT-MINSTY,IGNSLT)
LHDSP. (SLTDSP,ST.REJ-MINSTY,[RET]) ;[7476]ILLSLT changed to R
LHDSP. (SLTDSP,ST.STP-MINSTY,HSSTOP)
SUBTTL HSSTRT
;HSSTRT Process a received START slot
;
;Call:
; CALL HSSTRT
; Error Return - Terminate slot loop
; Normal Return - Continue to next slot
;
HSSTRT: SKIPE SLTSID ;Source ID 0 is illegal
SKIPE SLTDID ;Destination ID of non-0 is illegal
CALLRET ILLSLT ;Report an illegal slot received
OPSTR <ILDB T2,>,UNBFA,+UNB.OF(RB);Get the service class requested
CAIE T2,SCITTY ;Only interactive terminal class permitted
CALLRET ILLSLT ;If not, slot is illegal.
CALL SBALOC ;Allocate a slot block
RETSKP ;Ignore since server should persist and we
; assume we should almost always get an SB
OPSTRM <AOS T1,>,HNCON,(HN);Increment the number of connects.
OPSTR <CAMLE T1,>,HNMCO,(HN);Check if maximum exceeded.
JRST SLRESF ;No additional sessions permitted.
OPSTR <ILDB T2,>,UNBFA,+UNB.OF(RB);Attention slot size maximum
STOR T2,SBATS,(SB)
OPSTR <ILDB T2,>,UNBFA,+UNB.OF(RB);Data slot size maximum
STOR T2,SBMDS,(SB)
CALL GETTDB ;Get a terminal data block and start a job
JRST SLRESF ;No terminal data blocks available
MOVX T1,SBSTR ;Flag this slot as waiting to send
CALL SSBDAV ; a START slot when MUX runs.
RETSKP ;Return success
SLRESF: MOVEI T2,SE.RES ;Indicate insufficient resource as reject code
STOR T2,SBREA,(SB) ; and save for later when REJ slot built
MOVX T1,SBREJ ;Flag this slot as waiting to send
CALL SSBDAV ; a REJECT slot when MUX runs
RETSKP ;Return success
SUBTTL Slot Processing Routines -- STOP Slots
;HSSTOP - Process a STOP Slot.
;
;Call: SB/ Slot block address
; CALL HSSTOP
; Error return -
; Normal return
HSSTOP: SKIPE SLTSID ;Source Id must be zero
CALLRET ILLSLT ; else slot is illegal
SKIPN T2,SLTDID ;Destination ID should not be zero
CALLRET IGNSLT ; else slot is useless
CAILE T2,NTTLAH ;Is the SBVECT index in range?
CALLRET ILLSLT ;No. Slot is illegal
MOVE T1,SBVECT ;Get the slot block address from
ADD T1,T2 ; the destination slot id
SKIPE SB,(T1) ;If the SB address is zero
OPSTR <CAME CB,>,SBCBA,(SB); or CB address has changed then
JRST IGNSLT ; ignore the slot since already gone.
CALL RELSB ;Release all slot resources
RETSKP ;Return success
SUBTTL Slot Processing Routines -- DATA_A,DATA_B Slots
;HSDATA - Process a DATA_A Slot
;
;Call: SB/ Slot block address
; CALL HSDATA
; Error return - illegal slot
; Normal return
HSDATA: CALL HDRDAT ;Go process data slot header
RET ;Illegal slot, error return
SKIPN W1,SLTCNT ;Get the number of characters in the slot
RETSKP ;None, return
LOAD T2,SBTDB,(SB) ;Terminal dynamic data base
DYNST ;Get the line number
NXSLCH: OPSTR <ILDB T1,>,UNBFA,+UNB.OF(RB);Get a character.
CALL TTCHI ;Call TTYSRV to enter into input buffer
TRN ;Ignore error
SOJG W1,NXSLCH ;If still more, continue
RETSKP ;Otherwise return success
HSDATB: ;Process received DATA_B slot (NOP)
HDRDAT: SKIPE T2,SLTDID ;Destination ID cannot be zero
CAILE T2,NTTLAH ; or greater than maximum slot index
CALLRET ILLSLT ;Illegal slot
MOVE T3,SLTSID ;Source ID from the slot
MOVE T1,SBVECT ;Get the address of the SB
ADD T1,T2 ; based on the remote slot id from
SKIPN SB,(T1) ; the message
CALLRET IGNSLT ;No slot block.
OPSTR <CAME T3,>,SBRID,(SB) ;Is slot source ID equal to SB remote ID?
CALLRET IGNSLT ;No, ignore the slot
LOAD T3,SBSTA,(SB) ;Get the slot state
CAIN T3,SS.RUN ;If the slot state is not running or
OPSTR <CAME CB,>,SBCBA,(SB) ; the circuit block address has changed
CALLRET IGNSLT ; then slot disappeared already so ignore.
MOVE T3,SLTTYP ;See if remote extended us any transmit
ANDI T3,17 ; credits. If so, add them to what we already
OPSTRM <ADDM T3,>,SBXCR,(SB); have.
SKIPN SLTCNT ;Do remote credit check only if there was
RETSKP ; data in the slot.
OPSTR <SOSGE T3,>,SBRCR,(SB) ;Decrement the receive credits
JRST ILLSLT ;Illegal, server sent data with no credits
STOR T3,SBRCR,(SB) ;Store back updated credits count
SKIPE T3 ;If receive credits have gone to zero,
IFSKP. ; then indicate we need to grant more credits
MOVX T1,SBOUT ; by setting setting data available
CALL SSBDAV ; for MUX when it runs next time.
ENDIF.
RETSKP
SUBTTL Slot Block Allocation and Deallocation Routines
;SBALOC - Slot Block Allocation Routine
;
;Call: CB/ circuit block address
; CALL SBALOC
; Error Return
; Normal Return
; SB/ Address of allocated slot block
;
; This routine allocates and initializes a new slot block.
SBALOC: MOVEI T1,SB.LEN ;Number of words to allocate for a slot blk
CALL MMGTZW ;Try to get them
RET ;Can't
MOVE SB,T1 ;Put address in proper AC
MOVSI T4,-NSBWDS ;Look for a free slot block index
SBANXT: SKIPE T1,NFRSBQ(T4) ; by examining the free slot block words
JFFO T1,SBAGO ; for the first 1 bit. This represents
AOBJN T4,SBANXT ; the first free slot block index
RET ;No slot block available
SBAGO: HRRZS T4 ;Clear out left half
MOVE T3,BITS(T2) ;Clear the bit since the index is
ANDCAM T3,NFRSBQ(T4) ; no longer free
IMULI T4,^D36 ;Compute the slot block index
ADDI T2,1(T4) ;Cannot be zero
STOR T2,SBLID,(SB) ;Store in SB as local slot index
MOVE T1,SBVECT ;Now store the address of the slot block
ADD T1,T2 ; in the vector of slot block address, which
MOVEM SB,(T1) ; is indexed by slot block index
XMOVEI T1,CB.SBQ(CB) ;Queue the SB to the circuit block's
MOVE T2,SB ; queue of slot blocks.
CALL LAQUE ;
MOVEI T1,CS.STA ;Set the slot state
STOR T1,SBSTA,(SB) ; to starting.
STOR CB,SBCBA,(SB) ;Store the circuit block address in SB
MOVE T1,SLTSID ;Get the remote's slot id
STOR T1,SBRID,(SB) ;Store as our remote id
MOVE T1,SLTTYP ;Get the Slot type/credits from recv's slot
ANDI T1,17 ;Keep only the number of credits extended to us
STOR T1,SBXCR,(SB) ;Store is slot block as our transmit credits
MOVEI T1,MAXCRE ;Maximum credits to extend to remote
STOR T1,SBRCR,(SB) ; to current number of remote credits
RETSKP ;Return successfully
;SSBDAV - Set Slot BLock Data Available
;
;Call: T1/ Bit to set in SB.FLG
; SB/ Slot block address
; CALL SSBDAV
; Normal Return
SSBDAV: SKIPGE T2,SB.FLG(SB) ;Is there already data available?
IFSKP. ;No, so set it now
OPSTRM <AOS>,CBSDC,(CB);Increment number of slots waiting
TLO T2,400000 ; and indicate this slot now waiting
ENDIF.
IOR T2,T1 ;OR in new reason for waiting
MOVEM T2,SB.FLG(SB) ; and store back
RET ;Return
;CSBDAV - Clear Slot BLock Data Available
;
;Call: T1/ Bit to clear in SB.FLG
; SB/ Slot block address
; CALL SSBDAV
; Normal Return
CSBDAV: SKIPL T2,SB.FLG(SB) ;Is "data available" already clear?
RET ;Yes
ANDCM T2,T1 ;Clear the desired bit
TLNE T2,377777 ;Are all bits off now?
IFSKP.
OPSTRM <SOS>,CBSDC,(CB)
MOVEI T2,0
ENDIF.
HLLM T2,SB.FLG(SB)
RET
;RELSBS - Release all Slot Blocks and their Resources for a virtual circuit
;
;Call: CB/ Address of the circuit block
; CALL RELSBS
; Normal Return
;
RELSBS: JUMPE CB,RTN ;No slots to release if no circuit block
OPSTR <SKIPN SB,>,QLFWD,+CB.SBQ(CB);Get the address of first SB on Q
RET ;If zero, there are no more on the queue
CALL RELSB ;Release the slot block
JRST RELSBS ;Go do the next
RET
;RELSB - Release a Slot Block and its Resources
;
;Call: CB/ Address of the circuit block for slot
; SB/ Address of the slot block to release
; CALL RELSB
; Normal Return
; SB/ address of previous slot or listhead
RELSB: OPSTR <SKIPN T2,>,SBTDB,(SB) ;Is there a terminal data base
JRST RELSB0 ;No, go just release the SB resources
SETZM TTDEV(T2) ;Clear the slot block address in the TDB.
SETZRO TTPRM,(T2) ;TDB no longer permanent
SETZRO TTOTP,(T2) ;Clear output in progress so sched tests work.
DYNST ;Get the static line number
CALL NTYCOF ;Go detach the job
LOAD T2,SBTDB,(SB) ;Get the TDB address again.
LOAD T1,TCJOB,(T2) ;If there is a controlling job, don't release
CAIE T1,-1 ; the TDB since this will be done
JRST RELSB0 ; later by JOBCOF.
DYNST ;No controlling job so we must release the
CALL TTYDE0 ; the dynamic data base here.
TRN ;TTYSRV already reports this.
RELSB0: OPSTR <XMOVEI T1,>,CBSBQ,(CB) ;Point to the CB SBQ header
MOVE T2,SB ; and
CALL LAUNQ ; release the SB from this queue
;**;[7231] Change 1 line at RELSB0+3 WCM 23-Jan-85
SKIPL SB.FLG(SB) ;Did this SB have any data waiting?
IFSKP. ;Yes
OPSTRM <SOS>,CBSDC,(CB) ;Reduce number of slots with data waiting
ENDIF.
OPSTRM <SOS>,HNCON,(HN) ;Reduce number of active connects.
CALL RLSBID ;Release the SB local id.
MOVE T1,SB
OPSTR <SKIPN SB,>,QLBWD,(SB);Set up so the slot mux gets the correct
XMOVEI SB,CB.SBQ(CB) ; next slot.
CALL MMFREE ;Free the memory
RET
;RLSBID - Release a Slot Block's local id.
;
;Call: SB/ Address of the SB
; CALL RLSBID
; Normal Return
;
RLSBID: OPSTR <SKIPN T1,>,SBLID,(SB);Get the SB local index
RET ;Already zero. Nothing to do.
MOVE T2,SBVECT ;Clear the pointer to SB
ADD T2,T1 ; in the vector of SB addresses
SETZM (T2) ; ...
SOS T1 ;Normalize to zero
IDIVI T1,^D36 ;Now clear the bit to indicate that the
MOVE T3,BITS(T2) ; slot block index is now free
IORM T3,NFRSBQ(T1) ; ...
SETZ T1, ;Clear the local
STOR T1,SBLID,(SB) ; SB ID.
RET
;GETTDB - get terminal dynamic data base
;
;Call: SB/ slot block address
; CALL GETTDB
; Error return
; Normal return
;
GETTDB:
SAVEAC <W1,W2>
MOVE W1,TT1LIN+TT.LAH
GTTDB0: LOAD T1,TTSTY,(W1) ;Get the line type
CAIE T1,TT.LAH
RET
MOVE T2,W1
CALL STADYN
JUMPE T2,GTTDB2
GTTDB1: AOJA W1,GTTDB0 ;Try next line
GTTDB2: MOVE T2,W1
CALL TTYASC
JRST GTTDB1
CALL STADYN
JRST GTTDB1
STOR T2,SBTDB,(SB)
MOVEM SB,TTDEV(T2)
SETONE TCJOB,(T2)
SETONE TTPRM,(T2)
MOVEI T1,.CHCNC
MOVE T2,W1
CALL TTCHI
NOP
RETSKP
;LHRRH - LAT device dependent "return remote host" code
;
; Given the line #, returns the originating hostname, line and
; network type. Places this info in the users NTINF% .NWRRH
; argument block. NTINF has already checked the user arguments
; for validity.
;
; Call with T1/ address of internal arg block
;
; ARG+.NWABC/ # of bytes available for host name
; ARG+.NWFNC/ not used
; ARG+.NWNNP/ byte pointer to store hostname string
; ARG+.NWLIN/ address of dynamic data for line
; ARG+.NWTTF/ flags, and network and terminal types
; ARG+.NWNNU/ node # word 1
; ARG+.NWNU1/ node # word 2
;
; Returns + 1 on error with T1/ error code
; + 2 on success
LHRRH:: SASUBR <UAB>
MOVEM T1,UAB ;SAVE OUTPUT POINTER
MOVX T4,NW%LAT ;SET NETWORK TYPE
DPB T4,[POINT 9,.NWTTF(T1),17] ;STORE NETWORK TYPE
MOVE T2,.NWLIN(T1) ;GET DYNAMIC DATA ADR
NOSKED ;PROTECT SB/CB FROM CHANGING BENEATH US
MOVE T2,TTDEV(T2) ;GET SB ADDRESS
JUMPE T2,LHRRH3
LOAD T3,SBCBA,(T2) ;GET CB ADDRESS
JUMPE T3,LHRRH3
LOAD T4,CBDNI,(T3) ;GET NI ADDRESS (WORD 1)
MOVEM T4,.NWNNU(T1)
LOAD T4,CBDNI,+1(T3) ;GET NI ADDRESS (WORD 2)
MOVEM T4,.NWNNU+1(T1)
MOVE T2,T3 ;SAVE CB ADDRESS IN T2
LOAD T3,CBRSC,(T3) ;GET COUNT OF CHARACTERS
JUMPE T3,LHRRH3 ;IF ZERO - NO HOST NAME
CAML T3,.NWABC(T1) ;MAKE SURE NO MORE THAN MAX
MOVE T3,.NWABC(T1) ;ENFORCE IT
MOVE T1,.NWNNP(T1) ;GET POINTER TO OUTPUT STRING
OPSTR <XMOVEI T2,>,CBSNM,(T2) ;GET ADR OF REMOTE NAME STRING
TXO T2,<OWGP. 7,> ;FORM BYTE POINTER TO BUFFER
EXCH T1,T2 ;PUT POINTER WHERE MMVAZS WANTS THEM
CALL MMVAZS ;COPY THE STRING
LHRRH2: SETZ T1,
IDPB T1,T2 ;DEPOSIT A NULL
MOVE T1,UAB ;GET POINTER TO USER ARG BLOCK
MOVX T2,NW%NNN ;GET "NO NODE NAME KNOWN" FLAG
SKIPN T3 ;GOT A NODE NAME ?
IORM T2,.NWTTF(T1) ;NO - SET THE "NO NODE NAME KNOWN" FLAG
OKSKED ;DONE WITH SB/CB
RETSKP
LHRRH3: MOVE T2,.NWNNP(T1) ;GET POINTER TO OUTPUT STRING
SETZ T3, ;NO NODE NAME
CALLRET LHRRH2 ;UPDATE HOSTNAME STRING, AND RETURN
SUBTTL Slot Multiplexor - Main Loop
;LAMUX Slot Multiplexor Main Loop
;
;Call: CALL LAMUX
; Normal return
;
LAMUX: LOAD CB,QLFWD,+HN.QAC(HN) ;Get the first CB on the active queue
LANXCB: JUMPE CB,RTN ;All CBs processed, return
MOVX T1,HNRUN ;Is the NI still up?
TDNE T1,HN.RUN(HN) ; ...
JRST [ CALL NIHALT ;No, so deallocate all resources
JRST MXNXCB] ;
SETZM NSLOTS ;No slots in message yet
LOAD T1,CBSTA,(CB) ;Consider only those circuits which are
CAIE T1,CS.RUN ; in the running state
JRST MXNXCB ; ...
OPSTR <SKIPN>,CBSBQ,(CB);If there are no slots for this circuit or
JRST [ CALL IDLHLT ; terminate the circuit.
JRST MXNXCB]
LOAD T1,HNLAS,(HN) ;Get the current access state.
CAIN T1,LS.OFF ; the access state is now off,
JRST MXNXC2 ;kill this circuit and look at next.
SETZRO CBRRF,(CB) ;No RRF set yet
CALL TMRCHK ;Check for circuit timer related functions.
JRST MXNXCB ;Continue with next circuit.
TMNN CBMRN,(CB) ;Must we go balanced (reply to server) now?
JRST LMNMRN ;No
; We have received a message from the server and must respond message now. If
; there is a free transmit buffer and there is slot data waiting to be sent,
; then build the slots in a large MSD transmit buffer and send it. If the MSD
; buffer is not available or there is no slot data waiting, just send a RUN
; message header. If there are no free transmit buffers, retransmit the queue
; of unacknowledged messages.
MOVX T1,CBMRS!CBMRN!CBRRF;Clear all flags
ANDCAM T1,CB.FLG(CB) ; since we will reply now.
SETZRO CBCSB,(CB) ;Clear count since balanced
SKIPN XB,CB.XBQ(CB) ;Is there a transmit buffer header free?
JRST LMNOXB ;No, go transmit unACK'd Q
OPSTR <SKIPE >,CBSDC,(CB);There is a buffer, is there data waiting?
CALL BLDMSL ;Everything there so build slots in buffer
NOP ;No slots, but don't care
CALL MTTRUN ;Transmit either hdr only or full message
JRST MXNXCB ;Go to next circuit block
LMNOXB: CALL XUNAKQ ;Transmit all messages on the unack'd Q
JRST MXNXCB
; Check to see if we just received a message from the server. If so,
; flag to force a reply at the next sheduler cycle. We wait one cycle in
; case user programs are controlling echoing in the hopes that response
; will be smoother.
LMNMRN: TMNN CBMRS,(CB) ;Must reply soon?
JRST LMUNSL
SETONE CBMRN,(CB) ;Yes, set to force reply on next cycle
JRST MXNXCB
; We are in balanced mode, i.e. the response to the latest server message
; has already been sent. Check here to see if we ought to send an unsolicited
; message. We are allowed one. We wait at least MXBALC scheduler cycles since
; last going balanced. If after that period there is slot data waiting, we
; send an unsolicited message to the server.
; If we have no data to send, wait another MXBALC cycles before trying again.
LMUNSL: LOAD T1,CBCSB,(CB) ;Number of cycles to wait before sending
CAIL T1,MXBALC ;Have we waited long enough?
IFSKP. ;No, so
AOJ T1, ; increment the count
STOR T1,CBCSB,(CB) ; and wait
JRST MXNXCB ; some more.
ENDIF.
; We have waited long enough. If there is slot data waiting and resouces
; available, send an unsolicited message to the server
SKIPN XB,CB.XBQ(CB) ;Is there a transmit buffer header free?
JRST MXNXCB ;No, so don't send anything
SETZRO CBCSB,(CB) ;We might send data; reset the ticker.
OPSTR <SKIPE >,CBSDC,(CB);Is there slot data waiting?
CALL BLDMSL ;Build a message full of slots
JRST MXNXC1 ;If no slots, do keep-alive timing.
CALL MTTRUN ;There are slots in the message so send it.
MXNXCB: LOAD CB,QLFWD,(CB) ;Index of the next CB on active queue
JRST LANXCB ;Continue looping
RET
; We don't have any unsolicited data to send, check if we have heard
; from the server within the last few SERVER_KEEP_ALIVE_TIMER seconds.
; If not, we will assume the server died, and we will kill the circuit.
MXNXC1: MOVE T1,TODCLK ;Get the current time
LOAD T2,CBKAT,(CB) ;Get the time last msg received
OPSTR <ADD T2,>,CBKAV,(CB) ;Add the keep-alive time
CAML T1,T2 ;Have we reached the limit yet?
MXNXC2: CALL LCLHLT ;Yes, consider the server dead and
JRST MXNXCB ;stop the circuit.
SUBTTL BLDMSL
;BLDMSL - Build RUN Message Slots
;
;Call: CB/ Address of Circuit Block
; CALL BLDMSL
; Normal return
;
; This routine scans through all slots associated with a LAT virtual circuit
; and builds RUN message slots for those which have data waiting to be sent
; to the remote node. SBFLGS contains a bits mask which indicates which
; type of slot must be built for the slot block. More than one bit may be set.
BLDMSL: OPSTR <SKIPN SB,>,QLFWD,+CB.SBQ(CB);Get addr of first slot for this CB
RET ;There are none
SETZRO UNBSZ,+UNB.OF(XB); and message count
SETZ MD, ;No transmit buffer yet.
BLSLOP: SKIPL W1,SB.FLG(SB) ;Does this slot have data waiting?
JRST MXNXSL ;No, loop to next slot
HLLZS W1 ;Clear all but flags
TLZ W1,400000
BLNXSL: JFFO W1,BLSDSP ;Find first flags bit which is lit.
MXNXSL: OPSTR<SKIPE SB,>,QLFWD,(SB);Get next slot's index and
JRST BLSLOP ; continue with the next slot
BLSLCP: SKIPN NSLOTS ;Check to see if any slots entered at all
RET ;None.
;If we couldn't get through all slots, rotate this circuit's slot queue so
;that we resume next time with the slot we did not complete this time.
SKIPN SB ;Did we get through the whole queue?
IFSKP. ;NO
OPSTR <CAMN SB,>,QLFWD,+CB.SBQ(CB);Is slot already at the Q head?
IFSKP. ;NO
LOAD T3,QLFWD,+CB.SBQ(CB);Get old queue head
LOAD T4,QLBWD,+CB.SBQ(CB);Get old queue tail
STOR T3,QLFWD,(T4) ;Joint them together
STOR T4,QLBWD,(T3) ; ...
LOAD T3,QLBWD,(SB) ;Get new Q tail from new Q head
SETZRO QLFWD,(T3) ;Clear new tail's forward ptr
SETZRO QLBWD,(SB) ;Clear new head's backward ptr
STOR SB,QLFWD,+CB.SBQ(CB);New head
STOR T3,QLBWD,+CB.SBQ(CB);New tail
ENDIF.
ENDIF.
;Compute final byte count padding to minimum NI datagram size if necessary.
LOAD T1,UNBSZ,+UNB.OF(XB);Store the larger of the final real message
CAIG T1,MINXBF-MMHDSI ; count and the minimum count as the message
MOVEI T1,MINXBF-MMHDSI ; count.
STOR T1,MDBYT,(MD) ;Store in MSD
RETSKP
; Check first to see if adding a new slot causes the number of slots in a
; message to exceed the maximum permitted by remote.
BLSDSP: LOAD T3,CBMSL,(CB) ;Get the maximum permitted by remote
CAMG T3,NSLOTS ; and compare with number of slots so far.
JRST BLSLCP ;At maximum, stop processing this circuit.
; Check to see if there is enough room remaining in the transmit buffer to
; include this slot.
HLRZ T1,SLLNTB-1(W2) ;Minimum bytes required for this slot type.
LOAD T3,UNBSZ,+UNB.OF(XB);Current number of bytes in the buffer.
ADD T1,T3 ;Count if we include this new slot.
CAILE T1,SZ.XBF ;Compare with total transmit buffer capacity.
JRST BLSLCP ;Will not fit so stop processing this circuit.
; Call the routine to build the slot. It may or may not be entered into the
; message. At this point however it is always marked as having been processed.
MOVE T1,BITS(W2) ;Get the mask for the bit
ANDCM W1,T1 ;Indicate that this slot has been processed.
CALL @SLBDSP-1(W2) ;Build the slot.
JRST BLNXSL ;Slot not entered. Try next.
; Slot successfully entered into the transmit buffer. Update the buffer counts.
; Terminal character count has already been added.
HRRZ T1,SLLNTB-1(W2) ;Get the count for the slot header.
OPSTR <ADD T1,>,UNBSZ,+UNB.OF(XB);Get the message count so far
TRNN T1,1 ;Is the count even?
IFSKP. ;No, must pad to even number
OPSTR <IDPB T1,>,UNBFA,+UNB.OF(XB);Put fill byte into message
AOS T1 ;Increment total in message
ENDIF.
STOR T1,UNBSZ,+UNB.OF(XB);
AOS NSLOTS ;Increment number of slots in the message.
JRST BLNXSL ;Get next slot request.
MIN. (MINSFL,<^L<SBREJ>,^L<SBSTR>,^L<SBSTO>,^L<SBOUT>,^L<SBFOU>,^L<SBFCC>>)
MAX. (MAXSFL,<^L<SBREJ>,^L<SBSTR>,^L<SBSTO>,^L<SBOUT>,^L<SBFOU>,^L<SBFCC>>)
SLBDSP: BLOCK <MAXSFL-MINSFL+1>
SLLNTB: BLOCK <MAXSFL-MINSFL+1>
LSLDT. (SLBDSP,SLLNTB,^L<SBREJ>-1,XSLREJ,<SZ.SHD+SZ.REJ>,<SZ.SHD+SZ.REJ>)
LSLDT. (SLBDSP,SLLNTB,^L<SBSTR>-1,XSLSTA,<SZ.SHD+SZ.SST>,<SZ.SHD+SZ.SST>)
LSLDT. (SLBDSP,SLLNTB,^L<SBSTO>-1,XSLSTP,<SZ.SHD+SZ.SSP>,<SZ.SHD+SZ.SSP>)
LSLDT. (SLBDSP,SLLNTB,^L<SBOUT>-1,XSLDTA,<SZ.SHD>,<SZ.SHD>)
LSLDT. (SLBDSP,SLLNTB,^L<SBFOU>-1,XSLATT,<SZ.SHD+SZ.ATT>,<SZ.SHD+SZ.ATT>)
LSLDT. (SLBDSP,SLLNTB,^L<SBFCC>-1,XSLDTB,<SZ.SHD+SZ.SDB>,<SZ.SHD+SZ.SDB>)
SUBTTL Slot Formatting Routines -- XSLSTA
;XSLSTA - Format a START Slot in the Transmit Buffer
;
;Call: SB/ Slot Block Address
; CB/ Circuit Block Address
; XB/ Transmit Buffer Address
; CALL XSLSTA
; Normal Return
;
XSLSTA: CALL XBFCHK ;Do we have a transmit buffer yet?
RET ;No, and can't get any.
MOVEI T1,SS.RUN ;Put the slot in the
STOR T1,SBSTA,(SB) ; RUNNING state.
MOVEI T1,<<ST.STA_^D12>!<MAXCRE_^D8>!SZ.SST>;COUNT/TYPE/CREDITS fields
CALL BSLTHD ;Build the slot header
MOVEI T1,SCITTY ;Only available service class currently
OPSTR <IDPB T1,>,UNBFA,+UNB.OF(XB)
MOVEI T1,MXSLSI ;Maximum slot size for all slot types
OPSTR <IDPB T1,>,UNBFA,+UNB.OF(XB);As maximum attention slot size
OPSTR <IDPB T1,>,UNBFA,+UNB.OF(XB);As maximum data slot size
MOVEI T1,0
CALL LAP2B0 ;Zero slot names
OPSTR <IDPB T1,>,UNBFA,+UNB.OF(XB);No parameters either
MOVX T1,SBSTR ;Indicate that this slot request successfully
CALL CSBDAV ; and entirely completed.
RETSKP
;XSLREJ - Format a REJECT Slot in the Transmit Buffer
;
;Call: SB/ Slot Block Address
; CB/ Circuit Block Address
; XB/ Transmit Buffer Address
; CALL XSLREJ
; Normal Return
;
XSLREJ: CALL XBFCHK ;Do we have a transmit buffer yet?
RET ;No, and can't get any.
LOAD T1,SBREA,(SB) ;Get the reject reason code
LSH T1,^D8
MOVEI T1,<ST.REJ_^D12!SZ.REJ>(T1) ;COUNT/TYPE/REASON fields
CALL BSLTHD ;Go build the slot header
MOVX T1,SBREJ ;Indicate that this slot request successfully
CALL CSBDAV ; and entirely completed.
CALL RELSB ;Release the slot.
RETSKP ;That's all there is to a REJECT slot.
SUBTTL Slot Formatting Routines -- XSLSTP
;XSLSTP - Format a STOP Slot in the Transmit Buffer
;
;Call: SB/ Slot Block Address
; CB/ Circuit Block Address
; XB/ Transmit Buffer Address
; CALL XSLSTP
; Normal Return
;
XSLSTP: CALL XBFCHK ;Do we have a transmit buffer yet?
RET ;No, and can't get any.
CALL RLSBID ;Release the local slot block ID.
LOAD T1,SBREA,(SB) ;Get the stop reason code
LSH T1,^D8
MOVEI T1,<ST.STP_^D12!SZ.SSP>(T1) ;COUNT/TYPE/REASON fields
CALL BSLTHD ;Go build the slot header
MOVX T1,SBSTO ;Indicate that this slot request successfully
CALL CSBDAV ; and entirely completed.
CALL RELSB ;Now go release the slot
RETSKP
;XSLATT - Format a ATTENTION Slot in the Transmit Buffer
;
;Call: SB/ Slot Block Address
; CB/ Circuit Block Address
; XB/ Transmit Buffer Address
; CALL XSLATT
; Normal Return
;
XSLATT: CALL XBFCHK ;Do we have a transmit buffer yet?
RET ;No, and can't get any.
MOVEI T1,<ST.ATT_^D12!SZ.ATT>;COUNT/TYPE fields
CALL BSLTHD ;Go build the slot header
MOVEI T1,1B30
OPSTRM <IDPB T1,>,UNBFA,+UNB.OF(XB);Deposit control flags
MOVX T1,SBFOU ;Indicate that this slot request successfully
CALL CSBDAV ; and entirely completed.
RETSKP
SUBTTL Slot Formatting Routines -- XSLDTA
;XSLDTA - Format a DATA_A Slot in the Transmit Buffer
;
;Call: W1/ Slot Block Flags
; SB/ Slot Block Address
; CB/ Circuit Block Address
; XB/ Transmit Buffer Address
; CALL XSLDTA
; Normal Return
; If we have transmit credit available, compute the maximum number of terminal
; output characters which may be entered into the slot. If we no longer have
; credit, set the character count to zero.
XSLDTA: SAVEAC <W1,W2>
SETZ W1, ;Assume character count is zero.
OPSTR <SKIPN>,SBXCR,(SB);Do we still have any transmit credit?
IFSKP.
LOAD T2,SBTDB,(SB) ;Get address of TDB
TMNE <TTSFG,TTRXF>,(T2);Check if at a page stop. If so, character
IFSKP. ; stays 0 (cannot call TTSND).
MOVEI W1,SZ.XBF-SZ.SHD;Get the residual buffer (minus slot header)
OPSTR <SUB W1,>,UNBSZ,+UNB.OF(XB); count.
CALL GTCHCT ;(T2/T1)Get total character count
CAMLE W1,T1 ;Smaller of residual count - 4 and TTOCT+TSALC
MOVE W1,T1 ;TTOCT+TSALC was smaller
OPSTR <CAMLE W1,>,SBMDS,(SB) ;Compare with maximum DATA_A slot size
LOAD W1,SBMDS,(SB) ;Maximum allowed by remote is less.
ENDIF.
ENDIF.
; Determine if the remote needs more credits and if we can give him any. If
; he doesn't or we can't and there is no terminal output data to be sent(count
; from above is 0) , exit without building the slot since there is no need to
; send one. Otherwise at least a DATA_A slot header will be sent. If it is
; extending credit, there may or may not be output data.
CALL CRECHK ;Check if we can grant more credit remote
SKIPE W1 ;Can't or don't need to so if there is no data
SKIPA ; either, no need to send a slot. Otherwise,
JRST XSLDA3 ; send at least empty slot granting new credit.
MOVE W2,T1 ;Save CRECHK result
CALL XBFCHK ;Do we have a transmit buffer yet?
JRST XSLDA3 ;No, and can't get any.
MOVE T1,W2 ;Retrieve CHECHK results
LSH T1,^D8 ;Shift to proper position
IORI T1,<ST.DTA_^D12>(W1);Fill in the rest of last 2 slot header bytes.
CALL BSLTHD ;Go build the slot header
JUMPE W1,XSLDA2 ;No slot data and no credits used.
MOVNS W1 ;Set up to be used in an AOBJN
HRLZS W1 ;... [-count,,0]
XSLDA0: LOAD T2,SBTDB,(SB) ;Dynamic TT data base
CALL TTSND ;Get a character from the buffer
JRST [ HRRZS W1
MOVEI T1,1(W1)
MOVNS T1
OPSTR <ADJBP T1,>,UNBFA,+UNB.OF(XB)
DPB W1,T1
JRST XSLDA1]
OPSTRM <IDPB T1,>,UNBFA,+UNB.OF(XB);Enter character into buffer
AOBJN W1,XSLDA0 ;Continue if more characters
XSLDA1: LOAD T1,SBXCR,(SB) ;Get our transmit credit count
SOS T1 ;Decrement since we may consume one credit now.
STOR T1,SBXCR,(SB) ; send data so store decremented credit count.
; Determine whether to slot request was FULLY completed. If not, don't
; clear the request bit since it will have to be completed next time around.
XSLDA2: OPSTRM <ADDM W1,>,UNBSZ,+UNB.OF(XB);Update the total message count.
OPSTRM <ADDM W2,>,SBRCR,(SB);Update his credit count.
LOAD T2,SBTDB,(SB) ;Get the TDB address back
CALL GTCHCT ;(T2/T1)Get remaining character count. If more,
JUMPN T1,RSKP ; return and do not clear request bit.
SETZRO TTOTP,(T2) ;Clear TTY output active if not more data.
OPSTR <SKIPN>,SBRCR,(SB);If remote has zero credit for transmits
RETSKP ; return successfully without clearint request.
MOVX T1,SBOUT ; Otherwise mark this request as complete.
CALL CSBDAV
RETSKP
XSLDA3: LOAD T2,SBTDB,(SB) ;Get the TDB address
CALL GTCHCT ;(T2/T1)Get remaining character count.
JUMPN T1,RTN
SETZRO TTOTP,(T2) ;There is no more terminal output, clear
RET ; the TTOTP bit and return.
SUBTTL Slot Formatting Routines -- XSLDTB
;XSLDTB - Format a DATA_B Slot in the Transmit Buffer
;
;Call: SB/ Slot Block Address
; CB/ Circuit Block Address
; XB/ Transmit Buffer Address
; CALL XSLDTB
; Normal Return
;
XSLDTB: OPSTR <SKIPE>,SBXCR,(SB);Do we still have any transmit credit?
CALL XBFCHK ;Check if we have a transmit buffer yet.
RET ; Didn't and can't get one.
LOAD T1,SBXCR,(SB) ;Current number of transmit credits available
SOS T1 ;Decrement since this slot will consume one.
STOR T1,SBXCR,(SB) ;Store back updated count.
CALL CRECHK ;Does remote need credits?
NOP ;Dont't care if he did and we can't provide
;**; [7275] Add one line at XSLDTB:+8L CJA 27-Mar-86
OPSTRM <ADDM T1,>,SBRCR,(SB) ;[7275] Update remote credit count
LSH T1,^D8 ;Shift to proper position.
IORI T1,<ST.DTB_^D12>!SZ.SDB;Fill in rest of last 2 header bytes.
CALL BSLTHD ;Go build the slot header
LOAD T2,SBTDB,(SB) ;Get the terminal data base address
MOVEI T1,SL.DXF ;Assume disabling XOFF recognition
TMNE TT%PGM,TTFLGS(T2)
MOVEI T1,SL.EXF ;No, enabling
OPSTR <IDPB T1,>,UNBFA,+UNB.OF(XB);Enter control flags to buffer
MOVEI T1,<XONC_^D8!XOFFC> ;XON and XOFF characters
CALL LAP2B0 ;Enter output XON/OFF chars into buffer
CALL LAP2B0 ;Also input XON/XOFF characters
MOVX T1,SBFCC
CALL CSBDAV
RETSKP
BSLTHD: MOVE T3,T1 ;Save input arg
LOAD T1,SBLID,(SB) ;Remote slot ID
LSH T1,^D8 ;Shift to second byte
OPSTR <IOR T1,>,SBRID,(SB) ;Local slot ID into first byte
CALL LAP2B0 ;(Clobbers T2 only.)
MOVE T1,T3 ;Get original argument back
CALL LAP2B0 ;Enter count/slot type/credits
RET
;CRECHK - Remote Credit Check Routine
;
;Call: SB/ Slot Block Address
; CALL CRECHK
; No-Grant return
; Grant return
; T1/ Number to grant
; If the remote has less than the maximum number of transmit credits, try to
; compute the number of additional credits to grant him and return in T1,
; shifted by one byte (for convenience of caller). We can only grant credit
; if there is room for a non-zero integral number of full slot buffers (of
; length MXSLSI).
;[7469] If terminal has pause at end of page enabled always be sure to
;[7469] grant at least 1 credit. If zero credits are granted and the
;[7469] user hits end of page they will not be able to resume type out
;[7469] by pressing the unpause character, since the LAT box will not
;[7469] be able to send it.
CRECHK: MOVEI T1,MAXCRE ;Maximum number of credits remote may have.
OPSTR <SUB T1,>,SBRCR,(SB);His deficiency.
JUMPE T1,RTN ;Can't grant him more-- he already has limit.
MOVE T3,T1 ;Save remote's credit deficiency.
LOAD T4,SBTDB,(SB) ;Get the terminal dynamic pointer
LOAD T1,TIMAX,(T4) ;Maximum that will fit in an input buffer
SUB T1,TTICT(T4) ;Subtract current input count to get whats left
IDIVI T1,MXSLSI ;Compute number of slot buffer that would fit
;**;[7469] Add 6 lines at CRECHK + 8L BEL 27-APR-87
IFE. T1
SETONE TTFWK,(T4) ;[7469] Hopefully start the process running
JE TT%PGM,TTFLGS(T4),RTN ;[7469] Jump if not in page mode
TMNE TTNXO,(T4) ;[7469] Pause at end of page?
MOVEI T1,1 ;[7469] Yes, always grant 1 credit
ENDIF.
CAMLE T1,T3 ;Make sure he never gets a total of more than
MOVE T1,T3 ; the maximum allowed.
RETSKP
IGNSLT: SETZM SLTCNT ;Force data to be ignored.
RETSKP ;This is a good return.
ILLSLT: OPSTRM <AOS>,HCISR,(HN) ;Increment host count
OPSTRM <AOS>,CCISR,(CB) ; and the per-server count
RET ;Give a bad return
SUBTTL Queue Handling Routines
;LAQUE - Add an element to the front of a queue
;
;Call: T1/ Address of Queue Header
; T2/ Address of Element to Add
; CALL LAQUE
; Normal Return
; This routine is used to queue either CBs or SBs. The queue headers
; and link words are always two words, and are described by the BEGSTR QL.
; All elements are linked in both forward and backward directions.
LAQUE: MOVE T4,T1 ;Save queue header address
OPSTR <SKIPE T3,>,QLFWD,(T1) ;Get old first queue element if any.
MOVE T1,T3 ; Old first element or Q header backward
STOR T2,QLBWD,(T1) ; pointer points to new element
STOR T2,QLFWD,(T4) ;Store new first queue element
SETZRO QLBWD,(T2) ;Zero its backward pointer
STOR T3,QLFWD,(T2) ;Set up its forward pointer
RET
;LAUNQ - Dequeue a queue element
;
;Call: T1/ Address of queue header
; T2/ Address of queue element to be unqueued
; CALL LAUNQ
; Normal return
;
;Uses: T3,T4
LAUNQ: LOAD T3,QLBWD,(T2) ;Get elements backward pointer
LOAD T4,QLFWD,(T2) ;Get its forward ptr also.
SKIPN T2,T4 ;Remove the element from the backward list
XMOVEI T2,QL.FWD(T1) ; by updating the backward
STOR T3,QLBWD,(T2) ; ptr of either next Q element or Q head
SKIPE T3 ;If backward ptr 0 update Q head forward ptr
XMOVEI T1,QL.FWD(T3) ; otherwise update that of the previous Q
STOR T4,QLFWD,(T1) ; element
RET
;QUE1WB - Routine to queue and element to the back of a 1 directional queue.
;
;Call: T1/ address of Q header block
; T2/ address of queue element to add to queue
; CALL QUE1WB
; Normal return
QUE1WB: OPSTR <SKIPN T3,>,QLBWD,(T1);Address of first element on Q
MOVE T3,T1 ;Zero, Q header fwd ptr points to new element
STOR T2,QLFWD,(T3) ;Update forward ptr of Q hdr or old Q tail
SETZRO QLFWD,(T2) ;Zero new elements forward ptr
STOR T2,QLBWD,(T1) ;New tail ptr
RET
;UNQ1WF - Routine to remove an element from the front of a 1 directional queue.
;
;Call: T1/ address of the Q header block
; CALL UNQ1WF
; Error return - queue emtpy
; Normal return
; T2/ address of element
UNQ1WF: OPSTR <SKIPN T2,>,QLFWD,(T1);Address of first element on Q
RET ;Zero, so queue is empty
OPSTR <SKIPN T3,>,QLFWD,(T2);If only 1 element on Q then update
STOR T3,QLBWD,(T1) ; the Q headers tail ptr (set to 0)
STOR T3,QLFWD,(T1) ;There is a new head of the Q (or 0)
RETSKP ;Return with the Q element in T2
SUBTTL Buffer Handling Routines -- Transmit Buffers
;GETXBH - Get the necessary number of transmit buffer headers
;
;Call: CB/ Address of the circuit block
; CALL GETXBH
; Error return - insufficient resources
; Normal return
GETXBH: MOVSI W1,-MAXXBF ;Number of buffers to get
GTXNXT: MOVEI T1,<<MINXBF+3>/4+XBF.OF>;Buffer length to get
CALL MMGTZW ;Go get the storage
JRST GTXFL ;Failed to get all that are needed
MOVX T2,<POINT 8,0>
STOR T2, MDAUX,+MDB.OF(T1);
MOVEI T2,SZ.MHD ;The message header always has
STOR T2,MDBYT,+MDB.OF(T1); 8 bytes.
MOVEI T2,VMC.XC ;Always use exec virtual paging
STOR T2,MDVMC,+MDB.OF(T1) ; ...
XMOVEI T2,<XBF.OF>(T1) ;
STOR T2,MDALA,+MDB.OF(T1);Address of start of header
MOVE T2,T1 ;Now queue to circuit blocks queue of free
XMOVEI T1,CB.XBQ(CB) ; transmit buffers
CALL QUE1WB ; ...
AOBJN W1,GTXNXT ;Get as many as required
RETSKP
; Failed to get the nececessary number of buffers. Must free those
; which we did get.
GTXFL: XMOVEI T1,CB.XBQ(CB) ;Unqueu each from the transmit free Q
CALL UNQ1WF ; ...
RET ;No more there so return with error
MOVE T1,T2 ;Give back the buffer to the memory
CALL MMFREE ; manager
JRST GTXFL ; and continue looping til all returned
;GETXBF - Get one long transmit buffer for real data
;
;Call: CB/ Address of the circuit block
; XB/ Address of the 1st MSD (header)
; CALL GETXBH
; Error return - insufficient resources
; Normal return
; MD/ MSD address
GETXBF: MOVEI T1,<MD.LEN+SZ.XBF>;Buffer length to get
CALL MMGTZW ;Go get the storage
RET ;No luck!
MOVE MD,T1
SETZ T1,
MOVX T2,<POINT 8,0>
STOR T2,MDAUX,(MD);Byte pointer to message
MOVEI T1,SZ.XBF
STOR T1,MDBYT,(MD);Zero length
MOVEI T1,VMC.XC ;Always use exec virtual paging
STOR T1,MDVMC,(MD); ...
XMOVEI T1,<MD.LEN>(MD) ;
STOR MD,MDNXT,+MDB.OF(XB);Link header MSD to this
STOR T1,MDALA,(MD);Message address
RETSKP
;XBFCHK - Check for Transmit buffer
;
;Call: XB/
; CALL XBFCHK
; Error Return
; Normal Return
XBFCHK: JUMPN MD,RSKP ;If we already have one, return.
CALL GETXBF ;Get an MSD transmit buffer
RET ;None available, return failure
MOVX T1,<POINT 8,MD.LEN(MD)>; and
STOR T1,UNBFA,+UNB.OF(XB); message byte pointer.
RETSKP
;RFXBFS - Release all free transmit buffers
;
;Call: CB/ circuit block address
; CALL RFXBFS
; Normal return
;
RFXBFS: XMOVEI T1,CB.XBQ(CB) ;Address of the free xmit buffer queue
CALL UNQ1WF ;Unqueue the head of the Q
RET
MOVE XB,T2 ;Put buffer address where RELXBH wants it
CALL RELXBH ;Go release it
JRST RFXBFS ;Get next
;RELXBF - Release Transmit Buffer
;
;Call: XB/ Address of buffer header
; CALL RELXBF
; Normal return
RELXBF: OPSTR <SKIPN T1,>,MDNXT,+MDB.OF(XB);If there is no MSD style buffer
RET ; then just return
SETZRO MDNXT,+MDB.OF(XB); otherwise clear the link to it in header MSD
CALL MMFREE ; and free the MSD's storage.
RET
;RELXBH - Release Transmit Buffer Header and Buffer
;
;Call: XB/ Address of buffer header
; CALL RELXBH
; Normal return
RELXBH: CALL RELXBF ;Release the buffer first
MOVE T1,XB ;Now the header
CALL MMFREE
RET
SUBTTL Buffer Handling Routines -- Receive Buffers
;GETRBF - Get a Receive buffer
;
;Call: CALL GETRBF
; Error return - no receive buffers
; Normal Return
;
; This routine checks to see if enough receive buffers have been posted
; to the NI DLL to support the number of currently active circuits plus
; a new one. If buffers are needed and can be obtained, they are posted
; directly to the NI DLL. If some are needed, and cannot be obtained,
; the error return is taken.
GETRBF: STKVAR <BUFADR>
LOAD T1,HNNRB,(HN) ;Do check to see if we need more buffers.
LOAD T2,HNNAC,(HN)
CAIL T1,1(T2)
RETSKP ;No additional are needed. Return success.
MOVEI T1,<<LMRFSI+3>/4+UN.LEN+UE.LEN>;Receive buffer word size
CALL MMGTZW ;Get the number of required buffers
RET ;Can't, return error.
MOVEM T1,BUFADR ;Save address in case we can't post buffer
CALL RBPOST ;Post the receive buffer to NISRV
IFSKP.
OPSTRM <AOS>,HNNRB,(HN);Increment the number of receive buffers
RETSKP ;Return success
ENDIF.
MOVE T1,BUFADR ;Get address of buffer
CALLRET MMFREE ;Couldn't post it so free it and
; return with error.
;RELRBF - Release a Receive buffer
;
;Call: RB/ Address of the buffer to release
; CALL RELRBF
; Normal Return
;
; This routine frees a receive buffer if there is already a sufficient number
; posted to the NI DLL otherwise the buffer is re-posted to the NI DLL.
RELRBF: LOAD T1,HNNRB,(HN) ;Do we still need this buffer?
LOAD T2,HNNAC,(HN)
CAILE T1,1(T2)
JRST RELRB0 ;No, so free it
MOVE T1,RB ;Yes, so
CALL RBPOST ; re-post it to NISRV
JRST RELRB0 ;NISRV could not accept it?! Release it.
RET ;Successfully re-posted. Return.
RELRB0: MOVE T1,RB ;Here to free the buffer.
CALL MMFREE
OPSTRM <SOS>,HNNRB,(HN) ;Reduce the number of receive buffers
RET
ENDAV.
SUBTTL TTYSRV DEVICE DEPENDENT ROUTINES
LTSTRO::MOVX T1,SBOUT
SETONE TTOTP,(T2) ;Set output active
JRST LTSSDC
LTCOBF::MOVX T1,SBFOU
JRST LTSSDC
LTEXF:: MOVX T1,SBFCC
LTSSDC: ACVAR <HN,XB,RB,CB,SB,W1,W2>
NOSKD1
CHNOFF DLSCHN
SKIPN SB,TTDEV(T2) ;Get the slot data base from TDB if not 0
JRST LTSSD0
MOVE CB,SB.CBA(SB) ;Get the circuit data base from slot block.
SAVEAC <T2> ;TTYSRV needs T2 returned intact
CALL SSBDAV
LTSSD0: CHNON DLSCHN
OKSKD1
RET
; TTYSRV Device Dependent Routine to see if SENDAL should be done on this
; line.
; Call: T2/ Line Number
; Non-skip Return/ Skip SENDALL to this Line
; Skip Return / Do SENDALL to this Line
LTSALL::SKIPG TTACTL(T2) ;Is line fully active?
RET ;No, don't do SENDALL
RETSKP ;Yes, do the SENDALL
; TTYSRV device dependent routine to perform hang-up action
;
;Call: T2/ Line Number
LTHNGU::SAVEAC <T2> ;Caller wants this back intact
CALL STADYN ;Get the dynamic data base
RET ;There is none
MOVX T1,SBSTO ;Mark to send STOP slot if necessary
CALL LTSSDC ;(CALLRET won't work here)
RET
; TTYSRV device dependent routine to see if output is possible on a line
;
; Call: T2/ TDB Address
; Non-skip Return/ Output not possible
; Skip Return / Output possible
LTTCOU::RETSKP
; TTYSRV device dependent routine to set LAT Host terminal lines as
; high speed lines.
;
;RETSKP always with:
; T3/ ^D9600 to simulate high speed output
; T4/ IBFRC1 the high speed terminal characteristics word
LTSOF:: MOVEI T3,^D9600 ;Fake 9600 baud
MOVE T4,IBFRC1 ;High speed buffer word
RETSKP ;Always
SUBTTL General Untility Routines
;
;RANDOM - get a "random" number
;
;Call: T1/ Maximum number allowed
; CALL RANDOM
; Normal Return
; T1/ Random Number
RANDOM: MOVE T4,T1 ;Save for modulo
CALL LGTAD ;Get internal time and date
ANDI T1,777777 ;Time only
IDIV T1,T4
SKIPN T1,T2 ;Zero not allowed
AOS T1
RET
ENDAV.
;GTCHCT - Get character count for terminal output.
;Call: T2/ TDB address
;Return:
; T1/ Total character count
GTCHCT: SETZ T1,0
TMNN TTSAL,(T2) ;Is there a send all in progress?
IFSKP. ;Yes, must include count of the
LOAD T1,TSALC,(T2) ; send all buffer.
ENDIF.
ADD T1,TTOCT(T2) ;Add the terminal buffer count.
RET
LIT
MMGTZW: XCALLRET (XCDSEC,DNGWDZ)
MMFREE: XCALLRET (XCDSEC,DNFWDS)
END