Trailing-Edge
-
PDP-10 Archives
-
BB-M080I-SM
-
monitor-sources/mexec.mac
There are 53 other files named mexec.mac in the archive. Click here to see a list.
;Edit 6733 to MEXEC.MAC by MOSER on Thu 27-Jun-85
; FIX EDIT 3115 - CRJOB CJ%WTA BUG
;EDIT 6673 - FIX CRJOB IF CJ%WTA
;Edit 3162 to MEXEC.MAC by LOMARTIRE on Mon 10-Sep-84, for SPR #17644
; Prevent MDDJFNs by preventing AC smashing at JOBCOF
;Edit 3160 to MEXEC.MAC by TBOYLE on Wed 5-Sep-84, for SPR #18748
; CFOBF TO RESET XOFF STATE AT LOGOUT
;Edit 3147 to MEXEC.MAC by TBOYLE on Fri 10-Aug-84, for SPR #18939
; Add HNGU0F,HNGU1F for DTR dropping on LOGOUT.
;Edit 3133 to MEXEC.MAC by TBOYLE on Thu 28-Jun-84, for SPR #19970
; Make proxy attach succeed if TTY active and unassigned.
;Edit 3127 to MEXEC.MAC by TBOYLE on Wed 20-Jun-84, for SPR #18961
; Fix session start and end times and checkpointed values
;Edit 3115 to MEXEC.MAC by MOSER on Fri 8-Jun-84, for SPR #19578
; FIX CRJOB AND EXEC XCT ONLY
;EDIT 3115 - CHANGES FOR XCT ONLY EXEC AND CRJOB
;Edit 3078 to MEXEC.MAC by EVANS on Mon 5-Mar-84, for SPR #19898
; Make Attach, Detach, & Set Session Remark write USAGE records.
;Edit 3075 to MEXEC.MAC by TBOYLE on Tue 14-Feb-84, for SPR #19921
; Release ENQ locks at LOGOUT.
;Edit 3042 to MEXEC.MAC by TBOYLE on Wed 9-Nov-83, for SPR #19645
; Wait for output to end before starting CHECKD.
;Edit 3034 to MEXEC.MAC by HAUDEL on Fri 28-Oct-83, for SPR #19247
; ADD ERJMP .+1 AFTER TTMSG IN ATACH CODE
;Edit 3010 to MEXEC.MAC by LOMARTIRE on Wed 7-Sep-83, for SPR #19445
; Do not allow ATACH from batch unless WHEEL or OPR enabled
;Edit 2941 by MOSER on Thu 7-Apr-83, for SPR #18939
; ADD COFTST. CARRIER OFF DETACH TIME BEFORE LOGOUT
;EDIT 2941 - MAKE CARRIER OFF DETATCH TIME A STG GLOBAL
; UPD ID= 280, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.18, 4-Jan-83 10:12:31 by WEETON
;Edit 2892 - Allow proxy attaches to assigned TTY.
; UPD ID= 271, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.17, 17-Dec-82 15:54:29 by WEETON
; UPD ID= 269, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.16, 15-Dec-82 15:38:32 by WEETON
; UPD ID= 260, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.15, 9-Dec-82 16:41:46 by MOSER
;EDIT 2884 - PREVENT HUNG JOBS DURING LOGOUT
; UPD ID= 245, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.14, 7-Dec-82 22:24:34 by COBB
;EDIT 2879 - Don't PUSH in STKVAR context in literal at LDTACH+10
; UPD ID= 241, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.13, 3-Dec-82 17:52:15 by WEETON
;EDIT 2876 - Allow lowercase when answering "WHY RELOAD?"
; UPD ID= 237, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.10, 2-Dec-82 15:36:02 by WEETON
;EDIT 2874 - Fix ITRLGO BUGCHKs and WAITNI BUGHLTs
; UPD ID= 221, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.9, 10-Nov-82 14:35:54 by WEETON
; UPD ID= 218, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.8, 9-Nov-82 16:38:06 by MOSER
;EDIT 2859 - PASS TARGET JOB NUMBER TO ACJ IN ATTACH
; UPD ID= 157, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.7, 1-Oct-82 12:21:22 by DONAHUE
;Edit 2827 - Remove extra OKSKED
; UPD ID= 119, FARK:<5-1-WORKING-SOURCES.MONITOR>MEXEC.MAC.5, 14-Sep-82 09:27:40 by MOSER
;EDIT 2812 - MAKE GETOK FOR LOGOUT HAVE GOOD ARGS AT JOBCF1
; UPD ID= 19, FARK:<5-WORKING-SOURCES.MONITOR>MEXEC.MAC.3, 6-Apr-82 10:08:22 by MOSER
;EDIT 2603 - FIX ARGUMENT BLOCK LENGTH CHECKING IN CHKAC.
; UPD ID= 18, FARK:<5-WORKING-SOURCES.MONITOR>MEXEC.MAC.2, 5-Apr-82 14:29:30 by MOSER
;EDIT 2602 - Let CHKAC check legality of access even if connected directory
; is garbage.
; UPD ID= 555, SNARK:<5.MONITOR>MEXEC.MAC.69, 20-Mar-82 19:41:30 by PAETZOLD
;TCO 5.1766 - Turn on FH%EPN in PMAP call in SJLGO4. PM%EPN does not work.
; UPD ID= 535, SNARK:<5.MONITOR>MEXEC.MAC.68, 12-Mar-82 14:40:21 by PAETZOLD
;TCO 5.1753 - Turn on PM%EPN in PMAP call in logout code. Prevents PAGLCKs
; UPD ID= 497, SNARK:<5.MONITOR>MEXEC.MAC.67, 4-Mar-82 13:56:46 by MURPHY
;TCO 5.1744 - Refers to changes made approx June, 1980. Make default
; settings of system messages more like release 4.
; UPD ID= 481, SNARK:<5.MONITOR>MEXEC.MAC.66, 23-Feb-82 11:08:38 by MILLER
;TCO 6.1054. Complete merges from rel. 6
; UPD ID= 440, SNARK:<5.MONITOR>MEXEC.MAC.65, 25-Jan-82 00:01:42 by MURPHY
;TCO 5.1697 - XSSEV%, etc. Move GETPAT and GETDMS to FORK.MAC
; UPD ID= 407, SNARK:<5.MONITOR>MEXEC.MAC.64, 18-Jan-82 10:37:36 by MILLER
;TCO 5.1678 again. Enhance check in ATACH for specific TTY designator
; UPD ID= 404, SNARK:<5.MONITOR>MEXEC.MAC.63, 15-Jan-82 16:24:28 by MILLER
;More TCO 5.1678. Check for same job number
; UPD ID= 399, SNARK:<5.MONITOR>MEXEC.MAC.62, 15-Jan-82 13:41:30 by MILLER
;TCO 5.1678. Make detach of object job in ATACH race-free.
; UPD ID= 393, SNARK:<5.MONITOR>MEXEC.MAC.61, 13-Jan-82 12:10:44 by MILLER
;TCO 6.1054. ADD GTOKM IN ATTACH.
; UPD ID= 386, SNARK:<5.MONITOR>MEXEC.MAC.60, 9-Jan-82 18:30:36 by MILLER
;TCO 5.1661. Unlatch MOS cotrollers after TGHA runs
; UPD ID= 331, SNARK:<5.MONITOR>MEXEC.MAC.59, 30-Nov-81 14:00:13 by MOSER
;TCO 5.1614 MAKE CJ%ETF WORK WITH CJ%FIL.
; UPD ID= 247, SNARK:<5.MONITOR>MEXEC.MAC.58, 6-Oct-81 15:21:24 by MOSER
;MORE TCO 5.1512 FIX A BUG.
; UPD ID= 222, SNARK:<5.MONITOR>MEXEC.MAC.57, 28-Sep-81 16:20:34 by PAETZOLD
;TCO 5.1544 - CORRECT CALCULATION FOR UPPER LIMIT OF VBOOT GROUP IN GSMDSK
; UPD ID= 209, SNARK:<5.MONITOR>MEXEC.MAC.56, 23-Sep-81 13:41:05 by MURPHY
;DITTO
; UPD ID= 187, SNARK:<5.MONITOR>MEXEC.MAC.55, 16-Sep-81 17:50:34 by MURPHY
;TCO 5.1514 - Start SYSERR fork earlier in RUNDD so messages from FE don't pile up.
; UPD ID= 184, SNARK:<5.MONITOR>MEXEC.MAC.54, 16-Sep-81 12:09:35 by SCHMITT
;More TCO 4.1051 - Remove definition of USGMUP, it is in STG
; UPD ID= 182, SNARK:<5.MONITOR>MEXEC.MAC.53, 15-Sep-81 16:51:13 by SCHMITT
;TCO 4.1.1051 - Make system restart entry include Monitor uptime
; UPD ID= 179, SNARK:<5.MONITOR>MEXEC.MAC.52, 15-Sep-81 16:26:04 by MOSER
;TCO 5.1512 ADD SE1ENT TO JOBCOF.
; UPD ID= 134, SNARK:<5.MONITOR>MEXEC.MAC.51, 1-Sep-81 16:22:40 by GRANT
;Fix the check for DETACHed before CALL TTHNGU in LOG1 - dataset line was not
;being hung up if user was not logged in
; UPD ID= 57, SNARK:<5.MONITOR>MEXEC.MAC.50, 21-Jul-81 15:22:56 by GRANT
;Change "PS:" to "system structure"
;TCO 5.1375 - Fix bugs in ATACH JSYS
; UPD ID= 19, SNARK:<5.MONITOR>MEXEC.MAC.49, 12-Jul-81 15:44:27 by PAETZOLD
;Replace .FHSLF with .TTDES at DETMS3+3
; UPD ID= 18, SNARK:<5.MONITOR>MEXEC.MAC.48, 11-Jul-81 17:45:10 by PAETZOLD
;TCO 5.1407 - Make sure we dont ask to lock more memory than is on
; replacable queue in GSMD2
; UPD ID= 2289, SNARK:<5.MONITOR>MEXEC.MAC.47, 2-Jul-81 13:36:37 by PAETZOLD
;TCO 5.1393 - Change reference of BUGINT from immediate to full word
; UPD ID= 2265, SNARK:<5.MONITOR>MEXEC.MAC.46, 26-Jun-81 18:07:46 by MURPHY
;TCO 5.1376 - JOBCOF, FLOGO, FRKNOP
; UPD ID= 2125, SNARK:<5.MONITOR>MEXEC.MAC.45, 4-Jun-81 10:11:31 by GRANT
;Make sure all 23 bits of address get returned in GETSEG
; UPD ID= 2069, SNARK:<5.MONITOR>MEXEC.MAC.44, 22-May-81 16:48:23 by ZIMA
;TCO 5.1344 - Correct ATACH and DTACH privilege checking for batch jobs.
; UPD ID= 2056, SNARK:<5.MONITOR>MEXEC.MAC.43, 21-May-81 10:46:10 by SCHMITT
;More of TCO 5.1308
; UPD ID= 1967, SNARK:<5.MONITOR>MEXEC.MAC.42, 8-May-81 14:24:43 by SCHMITT
;More of TCO 5.1308 - Check for system shutdown in CHKR loop
; UPD ID= 1941, SNARK:<5.MONITOR>MEXEC.MAC.41, 5-May-81 17:06:32 by SCHMITT
;TCO 5.1308 - Latch HSYST1 to -1 when system shutdown
; UPD ID= 1921, SNARK:<5.MONITOR>MEXEC.MAC.40, 1-May-81 11:33:52 by PAETZOLD
;TCO 5.1301 add SCOUNT to GETAB tables, also bump SCOUNT in SETSN
; UPD ID= 1910, SNARK:<5.MONITOR>MEXEC.MAC.39, 30-Apr-81 16:29:05 by CHALL
;Inform the victim of a LOGOUT about the killer and his terminal
; UPD ID= 1817, SNARK:<5.MONITOR>MEXEC.MAC.38, 17-Apr-81 09:42:10 by WACHS
;TCO 5.1287 Restrict the possible answers to Why Reload question
; UPD ID= 1778, SNARK:<5.MONITOR>MEXEC.MAC.37, 31-Mar-81 17:43:13 by MURPHY
;Default is shutdown messages at 5 and 1 min
; UPD ID= 1719, SNARK:<5.MONITOR>MEXEC.MAC.36, 16-Mar-81 16:37:05 by MURPHY
;Add "PS:" to system expunge message
; UPD ID= 1569, SNARK:<5.MONITOR>MEXEC.MAC.35, 19-Feb-81 14:07:50 by HALL
;TCO 5.1180 - Move DST to non-zero section
; Fix EXEC0 so that it can run in section 1, because call to SETMPG
; can get to GDSTX
; BSRAD - Use extra stack location and avoid clobbering PC
; GOTSWM - Change BLT to initialize SYSFK table
; UPD ID= 1496, SNARK:<5.MONITOR>MEXEC.MAC.34, 26-Jan-81 13:25:47 by ENGEL
;GET RID OF THE LCS CALLS. NOT PART OF NEXT RELEASE ANYMORE
; UPD ID= 1485, SNARK:<5.MONITOR>MEXEC.MAC.33, 24-Jan-81 23:20:07 by ZIMA
;TCO 5.1240 - Fix connect time calculation in CPGCON checkpoint routine.
; UPD ID= 1479, SNARK:<5.MONITOR>MEXEC.MAC.32, 22-Jan-81 12:37:41 by ZIMA
;TCO 5.1238 - expunge properly on logout.
; UPD ID= 1292, SNARK:<5.MONITOR>MEXEC.MAC.31, 18-Nov-80 18:11:05 by MURPHY
;FIX BUG IN JOBCOF - MAKE DETACH HAPPEN BEFORE LOGOUT
; UPD ID= 1286, SNARK:<5.MONITOR>MEXEC.MAC.30, 18-Nov-80 14:40:13 by OSMAN
; UPD ID= 1248, SNARK:<5.MONITOR>MEXEC.MAC.29, 7-Nov-80 15:01:32 by SCHMITT
;TCO 5.1194 - Fix code at USGIN7 to not cause CHKPNT errors
; UPD ID= 1221, SNARK:<5.MONITOR>MEXEC.MAC.28, 2-Nov-80 11:48:37 by HALL
;TCO 5.1180 - MOVE THE DST TO NON-ZERO SECTION
; CHKR - RUN IN SECTION 1
; GSMDX - RUN IN SECTION 1
;tco 5.1189 - Make entry vector two words
; UPD ID= 1221, SNARK:<5.MONITOR>MEXEC.MAC.28, 2-Nov-80 11:48:37 by HALL
;TCO 5.1180 - MOVE THE DST TO NON-ZERO SECTION
; CHKR - RUN IN SECTION 1
; GSMDX - RUN IN SECTION 1
; UPD ID= 1143, SNARK:<5.MONITOR>MEXEC.MAC.27, 8-Oct-80 15:14:08 by MURPHY
;BUG IN JOBCOF
; UPD ID= 1103, SNARK:<5.MONITOR>MEXEC.MAC.26, 2-Oct-80 09:28:08 by MURPHY
;DITTO
; UPD ID= 1081, SNARK:<5.MONITOR>MEXEC.MAC.25, 1-Oct-80 11:53:31 by MURPHY
;FIX ACVAR, ETC.
; UPD ID= 975, SNARK:<5.MONITOR>MEXEC.MAC.24, 29-Aug-80 08:41:47 by ENGEL
;ADD LCS INITIALIZATION CALL
; UPD ID= 972, SNARK:<5.MONITOR>MEXEC.MAC.23, 25-Aug-80 16:53:39 by HALL
;TCO 5.1139 - ADD FAILING PC AND LSTERR TO OUTPUT WHEN FORK 0 CRASHES
; UPD ID= 965, SNARK:<5.MONITOR>MEXEC.MAC.22, 25-Aug-80 16:28:07 by ENGEL
;TCO 5.1136 - ADD DEVLKK
; UPD ID= 932, SNARK:<5.MONITOR>MEXEC.MAC.21, 20-Aug-80 14:59:31 by LYONS
;TCO 5.1062 WRITE VERIFICATION ON WRITE FOR DISKS
; UPD ID= 841, SNARK:<5.MONITOR>MEXEC.MAC.20, 5-Aug-80 16:20:06 by OSMAN
;tco 5.1109 - Add PDV support to SSAVE and GET
; UPD ID= 812, SNARK:<5.MONITOR>MEXEC.MAC.19, 30-Jul-80 11:03:46 by MURPHY
;WEFLAG - DON'T WRITE-PROTECT MONITOR IF NON-0
; UPD ID= 789, SNARK:<5.MONITOR>MEXEC.MAC.18, 23-Jul-80 17:20:10 by R.ACE
;TCO 5.1112 - REMOVE VESTIGIAL "MOVE T1,FORKX" AT JOBCF1+2
; UPD ID= 747, SNARK:<5.MONITOR>MEXEC.MAC.17, 8-Jul-80 17:50:12 by HALL
;FIX LYONS' EDIT TO CHKUM1
; UPD ID= 723, SNARK:<5.MONITOR>MEXEC.MAC.15, 2-Jul-80 11:28:18 by LYONS
;Fix ILMNRF in SAVE% JSYS by maping read only page to non-existant page
; with no access, and fooling SAVEB1 into thinking page is really there
;Fix missing checks for tty detached when we get CTRLTT in LOG1
;Fix time race in CHKUM1 that can cause J0NRUN
;Fix reason why system down as told to IMP
;Fix CTY login after ^ECEASE if it was prohibited before
;ARPAnet can cause UPDL overflows if user in JSYS which locks tty data
;A job with PSI for carrier off does not get it until reattach time.
; UPD ID= 703, SNARK:<5.MONITOR>MEXEC.MAC.14, 26-Jun-80 09:52:06 by LYONS
;Add code to call ACJ on an implicit logout (i.e. thru a hangup of a dataset)
; UPD ID= 700, SNARK:<5.MONITOR>MEXEC.MAC.13, 25-Jun-80 17:26:40 by MURPHY
;FIRST SHUTDOWN MESSAGE CONTROLLED BY SF%MS1
; UPD ID= 698, SNARK:<5.MONITOR>MEXEC.MAC.12, 25-Jun-80 17:05:46 by GRADY
;TCO 5.1079 - FIX RACE AT LDTAC2, BUT UNLOKK DEVLKK AND GO OKINT TOO.
; UPD ID= 666, SNARK:<5.MONITOR>MEXEC.MAC.10, 16-Jun-80 19:06:25 by LYONS
;FIX RACE AT LDTAC2, WHERE CTRLTT MAY NOT BE RIGHT
; UPD ID= 662, SNARK:<5.MONITOR>MEXEC.MAC.9, 16-Jun-80 17:23:27 by KONEN
;TCO 5.1063 - REMOVE PS: AS NAME OF PRIMARY STRUCTURE
; UPD ID= 597, SNARK:<5.MONITOR>MEXEC.MAC.8, 3-Jun-80 17:45:02 by MURPHY
;FACTSW BITS TO CONTROL SYSTEM MESSAGES
; UPD ID= 498, SNARK:<5.MONITOR>MEXEC.MAC.7, 30-Apr-80 15:06:35 by GRANT
;TCO 5.1030 - Add description to ?FULL
; UPD ID= 468, SNARK:<5.MONITOR>MEXEC.MAC.6, 23-Apr-80 15:52:58 by LYONS
;pushed literals as PC dont allow for non zero sections
; UPD ID= 445, SNARK:<5.MONITOR>MEXEC.MAC.5, 15-Apr-80 11:01:18 by HALL
;MOVE LOGDES AND JB0TT INTO RSDAT
; UPD ID= 401, SNARK:<5.MONITOR>MEXEC.MAC.4, 2-Apr-80 15:52:50 by HALL
;FIX LOWER CASE IN PREVIOUS EDIT
; UPD ID= 394, SNARK:<5.MONITOR>MEXEC.MAC.3, 1-Apr-80 15:44:01 by HALL
;MAKE JB0TT AND USGMUP BE PART OF RSVAR PSECT
; UPD ID= 374, SNARK:<5.MONITOR>MEXEC.MAC.2, 26-Mar-80 13:36:09 by ENGEL
;STOP EDDT SYMBOL FROM PRINTING
; UPD ID= 288, SNARK:<4.1.MONITOR>MEXEC.MAC.447, 21-Feb-80 10:58:17 by MURPHY
;NEW FKINT DEFS
; UPD ID= 266, SNARK:<4.1.MONITOR>MEXEC.MAC.446, 15-Feb-80 17:39:58 by MURPHY
;PROPER LENGTH FOR QTIMES TABLE IN GETAB
; UPD ID= 240, SNARK:<4.1.MONITOR>MEXEC.MAC.445, 1-Feb-80 14:40:27 by ENGEL
; UPD ID= 110, SNARK:<4.1.MONITOR>MEXEC.MAC.444, 7-Dec-79 16:30:00 by SCHMITT
;TCO 4.1.1051 - CALC. MONITR UPTIME IN SEC AND GIVE TO USAGE JSYS FOR RESTART
; UPD ID= 106, SNARK:<4.1.MONITOR>MEXEC.MAC.443, 7-Dec-79 09:34:57 by R.ACE
;TCO 4.2591 - SECTION-0 PAGE TABLE SHARE COUNT PROBLEM FROM SSAVE
;ADD ERJMP AFTER SOUT IN LITERAL AFTER SSAVB4
; UPD ID= 91, SNARK:<4.1.MONITOR>MEXEC.MAC.442, 5-Dec-79 09:13:00 by OSMAN
;tco 4.1.1044 - Make EXEC command in mini-exec do implicit RESET
;<4.1.MONITOR>MEXEC.MAC.441, 16-Nov-79 13:47:41, EDIT BY MILLER
;PREVIOUS CHANGES UNDER TCO 4.1.1021
;<4.1.MONITOR>MEXEC.MAC.440, 16-Nov-79 13:00:38, EDIT BY MILLER
;ADD TTFSMS BUGINF
;<4.1.MONITOR>MEXEC.MAC.439, 16-Nov-79 11:46:24, EDIT BY MILLER
;CHANGE ALLMSG TO TIME-OUT TTMSG
;<4.MONITOR>MEXEC.MAC.438, 15-Oct-79 14:07:08, EDIT BY MILLER
;REMOVE CKDFRK BUGHLT. IF CFORK FAILS, RETURN +1
;<4.MONITOR>MEXEC.MAC.437, 12-Oct-79 14:14:29, Edit by KONEN
;CORRECT CHKAC JSYS IN DEALING WITH STRUCTURES
;<4.MONITOR>MEXEC.MAC.436, 26-Sep-79 16:46:01, EDIT BY HALL
;PEEK JSYS - CALL BLTMU1 INSTEAD OF BLTMU FOR EXTENDED ADDRESSING
;<4.MONITOR>MEXEC.MAC.435, 12-Sep-79 16:09:36, EDIT BY HALL
;STCRJB - ENTER SECTION 1 IN ORDER TO CALL BLTMU
;<4.MONITOR>MEXEC.MAC.434, 10-Sep-79 16:56:18, EDIT BY HALL
;TCO 4.2452 - IN STCRJB SET UP T2 CORRECTLY FOR CALL TO BLTMU
;<OSMAN.MON>MEXEC.MAC.1, 10-Sep-79 15:44:06, EDIT BY OSMAN
;TCO 4.2412 - Move definition of BUGHLTs, BUGCHKs, and BUGINFs to BUGS.MAC
;<4.MONITOR>MEXEC.MAC.432, 5-Sep-79 14:30:26, EDIT BY ZIMA
;More 4.2406 - clean it up a bit
;<4.MONITOR>MEXEC.MAC.431, 22-Aug-79 06:44:05, EDIT BY R.ACE
;TCO 4.2414 - ADD SE1ENT AT LOGO TO PREVENT ILLUUO'S
;<4.MONITOR>MEXEC.MAC.430, 17-Aug-79 12:58:12, EDIT BY HALL
;LDET2 - FIX TYPO IN TOMCZAK'S EDIT
;<4.MONITOR>MEXEC.MAC.429, 16-Aug-79 16:15:38, EDIT BY TOMCZAK
;TCO#4.2406 - code added in job startup, logout, and two detaching
;routines to insure that CTY always defaults to refusing links
;<4.MONITOR>MEXEC.MAC.428, 16-Aug-79 14:23:24, EDIT BY OSMAN
;CHANGE DIRBAD TO DRBAD TO NOT CONFLICT WITH DIRBAD BUGCHK IN DIRECT
;<4.MONITOR>MEXEC.MAC.427, 14-Aug-79 10:37:46, EDIT BY DBELL
;TCO 4.2395 - HANDLE ERRORS DURING SAVE JSYS WHICH CAN HANG UP A JOB
;<4.MONITOR>MEXEC.MAC.426, 11-Aug-79 08:33:57, EDIT BY HALL
;IN JOB INITIALIZATION, INITIALIZE FLKCNT AND FLKOWN
;<4.MONITOR>MEXEC.MAC.425, 30-Jul-79 09:29:36, EDIT BY MILLER
;SET JOB 0 PRIORITY WORD TO MFRKWD
;<4.MONITOR>MEXEC.MAC.424, 28-Jul-79 16:31:24, EDIT BY ZIMA
;TCO 4.2357 - Fix CRJOB security bug by connecting created job to
; creator's login directory around STCRJB+13
;<4.MONITOR>MEXEC.MAC.423, 24-Jul-79 10:10:09, EDIT BY DBELL
;MORE TCO 4.2230 - WHEN GET A JOB 0 CRASH, TYPE OUT NEW PC TO GO TO
;<4.MONITOR>MEXEC.MAC.422, 2-Jul-79 13:43:37, EDIT BY R.ACE
;FIX SPELLING OF "CANCELED"
;<4.MONITOR>MEXEC.MAC.421, 27-Jun-79 13:07:10, Edit by KONEN
;STORE ASCII TIME AND DATE FOR TYPEOUT AT BUGHLT
;<4.MONITOR>MEXEC.MAC.420, 25-Jun-79 18:38:17, Edit by LCAMPBELL
; Yet ANOTHER ancient bug at ELOGO which would cause a job to be
; unlogoutable by anyone after a user without privs tried to log it out
;<4.MONITOR>MEXEC.MAC.419, 19-Jun-79 16:36:01, Edit by LCAMPBELL
; TCO 4.2298 - Fix race at ELOGO which caused GLREM2s
;<4.MONITOR>MEXEC.MAC.418, 18-Jun-79 12:40:22, EDIT BY DBELL
;TCO 4.2291 - MAKE "SHUTDOWN COMPLETE" TYPE BY USING RIGHT TERMINAL DESIGNATOR
;<4.MONITOR>MEXEC.MAC.417, 10-Jun-79 14:57:00, EDIT BY MILLER
;DON'T CALL RUNMO1 IF A 2020
;<4.MONITOR>MEXEC.MAC.416, 30-Apr-79 12:55:43, Edit by MCLEAN
;<4.MONITOR>MEXEC.MAC.415, 25-Apr-79 15:16:58, EDIT BY OSMAN
;MOVE OURNAM INITIALIZATION TO STG
;<4.MONITOR>MEXEC.MAC.414, 25-Apr-79 00:04:16, Edit by MCLEAN
;<4.MONITOR>MEXEC.MAC.413, 25-Apr-79 00:01:32, Edit by MCLEAN
;CHANGE FROM GETOK ON LOGOUT OVER QUOTA TO LOGOUT
;<4.MONITOR>MEXEC.MAC.412, 17-Apr-79 17:25:54, EDIT BY ZIMA
;TCO 4.2233 - Pass proper flags to CHKBAT in T3 in call at EXEC0+15
;<4.MONITOR>MEXEC.MAC.411, 13-Apr-79 11:10:28, EDIT BY BOSACK
;FIX TYPO IN IMUMAP
;<4.MONITOR>MEXEC.MAC.410, 12-Apr-79 14:51:47, EDIT BY HALL
;TCO 4.2230 - SYSTEM STARTUP ERROR HANDLING -- ADD JB0INT, ETC.
;<4.MONITOR>MEXEC.MAC.409, 9-Apr-79 11:25:31, EDIT BY MILLER
;FIX CODE AT GSMDSK AND GSMD2 TO COMPUTE AVAILABLE MEMORY PROPERLY
;<4.MONITOR>MEXEC.MAC.408, 9-Apr-79 08:49:06, EDIT BY HALL
;<4.MONITOR>MEXEC.MAC.407, 5-Apr-79 14:35:47, EDIT BY HALL
;<4.MONITOR>MEXEC.MAC.406, 5-Apr-79 14:34:49, EDIT BY HALL
;<4.MONITOR>MEXEC.MAC.405, 5-Apr-79 14:21:55, EDIT BY HALL
;<4.MONITOR>MEXEC.MAC.404, 5-Apr-79 13:19:59, EDIT BY HALL
;<4.MONITOR>MEXEC.MAC.403, 5-Apr-79 12:52:54, Edit by MCLEAN
;<4.MONITOR>MEXEC.MAC.402, 5-Apr-79 12:46:56, EDIT BY HALL
;<4.MONITOR>MEXEC.MAC.401, 5-Apr-79 12:06:35, EDIT BY HALL
;BEGINNING CLEANUP OF SYSTEM STARTUP ERROR HANDLING
;<4.MONITOR>MEXEC.MAC.400, 5-Apr-79 11:08:22, Edit by MCLEAN
;REMOVE 1 ARG FROM GTOKM
;<4.MONITOR>MEXEC.MAC.399, 3-Apr-79 14:12:16, EDIT BY MILLER
;FIX USGINI TO HANDLE MANGLED CHECKPOINT FILE.
;<4.MONITOR>MEXEC.MAC.398, 2-Apr-79 21:30:32, EDIT BY ZIMA
;Add missing AC in JUMPL at LOG1+14
;<4.MONITOR>MEXEC.MAC.397, 10-Mar-79 13:30:54, EDIT BY MILLER
;FIX FAST GET CODE.
;<4.MONITOR>MEXEC.MAC.396, 7-Mar-79 18:29:12, EDIT BY MILLER
;<4.MONITOR>MEXEC.MAC.395, 7-Mar-79 17:20:37, EDIT BY MILLER
;<4.MONITOR>MEXEC.MAC.394, 7-Mar-79 16:57:50, EDIT BY MILLER
;<4.MONITOR>MEXEC.MAC.393, 7-Mar-79 14:43:00, EDIT BY MILLER
;MORE IMPROVEMENTS TO FAST GET. USE MSETPT WHENEVER POSSIBLE
;<4.MONITOR>MEXEC.MAC.392, 7-Mar-79 12:20:20, Edit by MCLEAN
;FIX IT SO FLOGO RUNS IN SECTION 1
;<4.MONITOR>MEXEC.MAC.391, 6-Mar-79 14:12:26, EDIT BY MILLER
;FIX FAST GET TO CREATE SHARE POINTERS INSTEAD OF INDIRECT POINTERS
;<4.MONITOR>MEXEC.MAC.390, 4-Mar-79 18:27:47, EDIT BY KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
;<4.MONITOR>MEXEC.MAC.389, 2-Mar-79 15:28:04, Edit by MCLEAN
;FIX GTOKM MACROS FOR ERROR RETURNS
;<4.MONITOR>MEXEC.MAC.388, 26-Feb-79 16:47:02, EDIT BY HALL
;TCO 1967 - MAKE TSTFST CSKED WHILE FAST-GET TABLE IS LOCKED
;<4.MONITOR>MEXEC.MAC.387, 20-Feb-79 10:17:02, Edit by KONEN
;FIX ILMADR BUGHLT FROM CHECKPOINTING TOO LARGE A JOB NUMBER
;<4.MONITOR>MEXEC.MAC.386, 17-Feb-79 13:35:32, EDIT BY DBELL
;MAKE IMALC STORE PAGE NUMBER IN SYMPAG INSTEAD OF USING JSB STACK
;<4.MONITOR>MEXEC.MAC.385, 7-Feb-79 10:21:14, EDIT BY OSMAN
;SET UP OURNAM AND OURCNT HERE, SO NON-DECNET SYSTEMS ARE CONSISTENT
;<4.MONITOR>MEXEC.MAC.384, 4-Feb-79 22:33:30, EDIT BY GILBERT
;Start EDDT in section MSEC1 on EDDT$G to MDDT.
;<4.MONITOR>MEXEC.MAC.383, 29-Jan-79 03:56:20, EDIT BY DBELL
;CHANGE HSYPAG TO HSYBLK
;<4.MONITOR>MEXEC.MAC.382, 26-Jan-79 00:23:00, EDIT BY ZIMA
;TCO 4.2170 - Prevent UXXCKP BUGHLTS on restart when CHECKPOINT.BIN.1
; has been deleted and not expunged.
;<4.MONITOR>MEXEC.MAC.381, 18-Jan-79 19:21:50, EDIT BY MILLER
;CHANGE UNPAGE TO ONLY TURN OFF PAUSE ON END
;<4.MONITOR>MEXEC.MAC.380, 15-Jan-79 07:42:57, EDIT BY GILBERT
;More TCO 4.2155:
; Fix various bugs in .IMOPR and boot code.
;<4.MONITOR>MEXEC.MAC.379, 14-Jan-79 15:02:29, Edit by MCLEAN
;REMOVE TTMVSP CALL
;<4.MONITOR>MEXEC.MAC.378, 8-Jan-79 06:51:34, EDIT BY GILBERT
;TCO 4.2155 - Implement hidden symbol tables:
; Make boot process (GETSWM) understand hidden symbol tables.
; Add .IMOPR subroutine for MDDT and SNOOP% to map symbols.
;<4.MONITOR>MEXEC.MAC.377, 5-Jan-79 13:10:55, Edit by MCLEAN
;MAKE LOGOUT HAVE GETOK FOR OVER QUOTA
;<4.MONITOR>MEXEC.MAC.375, 3-Jan-79 20:10:42, EDIT BY GILBERT
;ADD A DUMMY DEFINITION OF .IMOPR FOR DDT VERSION 41
;<4.MONITOR>MEXEC.MAC.374, 20-Dec-78 09:51:57, EDIT BY OSMAN
;<4.MONITOR>MEXEC.MAC.373, 19-Dec-78 15:47:02, EDIT BY MURPHY
;ADD BLOCK PRIORITY TO SCHED CALLS
;SET JOB'S NODE NAME TO SYSTEM'S AT INITIALIZATION
;<4.MONITOR>MEXEC.MAC.372, 11-Dec-78 19:13:10, Edit by MCLEAN
;FIX TODDT TO BE IN SEC 1
;<4.MONITOR>MEXEC.MAC.371, 28-Nov-78 10:52:35, EDIT BY MILLER
;<4.MONITOR>MEXEC.MAC.370, 26-Nov-78 19:04:31, EDIT BY MILLER
;DO OKSKED IF CALL STADYN IN ATACH FAILS
;<4.MONITOR>MEXEC.MAC.369, 23-Nov-78 15:53:41, EDIT BY JBORCHEK
;<4.MONITOR>MEXEC.MAC.368, 22-Nov-78 14:38:35, EDIT BY JBORCHEK
;DELETE LHOSTN SIMULATION BACK TO A TABLE STARTING AT NOHOST
;<4.MONITOR>MEXEC.MAC.367, 16-Nov-78 12:38:26, EDIT BY MILLER
;<4.MONITOR>MEXEC.MAC.366, 16-Nov-78 12:31:36, EDIT BY MILLER
;FIX FSTGET TO USE VECSET INSTEAD OF SEVEC
;<4.MONITOR>MEXEC.MAC.364, 10-Nov-78 10:54:33, EDIT BY OSMAN
;CHANGE CPYTUS TO CPYTU1 FOR SESSION REMARK, LOGICAL LOCATION, AND SKIP RETURN SO POINTER ISN'T UPDATED TWICE
;<4.MONITOR>MEXEC.MAC.363, 9-Nov-78 13:25:14, EDIT BY OSMAN
;TCO 4.2083 - CHANGE .WAIT TO WAIT1
;tco 4.2083 - change HALTF to WAIT in LGOUT code
;<4.MONITOR>MEXEC.MAC.360, 31-Oct-78 17:21:58, EDIT BY JBORCHEK
;MAKE LHOSTN 3 WORDS LONG
;<4.MONITOR>MEXEC.MAC.359, 24-Oct-78 16:27:19, EDIT BY OSMAN
;TCO 4.2060 - ADD .JILLO
;<4.MONITOR>MEXEC.MAC.358, 23-Oct-78 21:15:20, Edit by MCLEAN
;TCO 4.2063 ADD BATSTF FOR BATCH FLAGS
;<4.MONITOR>MEXEC.MAC.356, 23-Oct-78 16:29:54, EDIT BY ENGEL
;MAKE "FULL" "?FULL"
;<4.MONITOR>MEXEC.MAC.355, 19-Oct-78 23:26:10, Edit by MCLEAN
;ADD LOGOMS CALL FOR OPR
;SNARK:<4.MONITOR>MEXEC.MAC.354, 17-Oct-78 14:28:28, Edit by MCLEAN
;FIX LOG2 TO HAVE PID ADDRESS IN T1
;<4.MONITOR>MEXEC.MAC.353, 1-Oct-78 22:19:53, EDIT BY DBELL
;TCO 4.2027 - ADD .JISTM ENTRY TO GETJI
;<4.MONITOR>MEXEC.MAC.352, 28-Sep-78 13:55:21, Edit by LCAMPBELL
; Fix NSKDIS when detaching NVT (ARPA)
;<4.MONITOR>MEXEC.MAC.351, 26-Sep-78 14:29:59, Edit by LCAMPBELL
; Cause GTRPI to return milliseconds again
;<4.MONITOR>MEXEC.MAC.350, 8-Sep-78 09:25:18, EDIT BY ENGEL
;SAVE T3 ACROSS CALL TO GTSVIF AT GTSVI:
;<4.MONITOR>MEXEC.MAC.349, 1-Sep-78 15:20:12, EDIT BY JBORCHEK
;REMOVE SYMBOLS IMPLBT AND NOHOST
;<4.MONITOR>MEXEC.MAC.348, 28-Aug-78 19:23:29, Edit by LCAMPBELL
; Simulate IMPHRT and HSTSTS GETABs so old utilities still work.
;<4.MONITOR>MEXEC.MAC.347, 25-Aug-78 13:35:55, Edit by MCLEAN
;REMOVE CALL TO PLRSTS
;<4.MONITOR>MEXEC.MAC.346, 25-Aug-78 09:38:17, EDIT BY ENGEL
;GET RID OF OPEN FLAGS FOR THE FFFFP AT USDIN1:
;<4.MONITOR>MEXEC.MAC.345, 23-Aug-78 11:48:58, EDIT BY R.ACE
;TCO 4.1992 - CHANGE MTASSP TO CALL RUNDII INSTEAD OF RUNDIR
;<4.MONITOR>MEXEC.MAC.344, 17-Aug-78 13:38:45, Edit by LCAMPBELL
;<4.MONITOR>MEXEC.MAC.343, 17-Aug-78 12:30:49, EDIT BY LCAMPBELL
;FIX RACE IN CRJOB WHICH CAUSES WRONG AC'S TO BE PASSED OCCASIONALLY
; (MISSING MEXEC.MAC.342 HEADER LINE OMITTED BY cower)
;<4.MONITOR>MEXEC.MAC.341, 16-Aug-78 14:47:05, EDIT BY COWER
;changed getji to check that word wanted (ac3) not negative
;<4.MONITOR>MEXEC.MAC.340, 16-Aug-78 01:45:29, Edit by MCLEAN
;REMOVE SE0ENT/SE1ENT FROM TODDT
;<4.MONITOR>MEXEC.MAC.339, 16-Aug-78 01:22:46, Edit by MCLEAN
;ADD GETOK FOR ENTRY TO MDDT
;<4.MONITOR>MEXEC.MAC.338, 4-Aug-78 12:01:11, EDIT BY MILLER
;MUST BE NOSKED WHEN CALLING ASSPTL
;<4.MONITOR>MEXEC.MAC.337, 4-Aug-78 08:45:35, EDIT BY MILLER
;FIX SOME TYPEOS
;<4.MONITOR>MEXEC.MAC.336, 4-Aug-78 08:00:57, EDIT BY MILLER
;FIX FSTMAP ROUTINE.
;<4.MONITOR>MEXEC.MAC.335, 3-Aug-78 19:16:34, EDIT BY MILLER
;FIX MORE TYPEOS
;<4.MONITOR>MEXEC.MAC.334, 3-Aug-78 12:07:55, EDIT BY MILLER
;FIX TYPEOS
;<4.MONITOR>MEXEC.MAC.333, 3-Aug-78 11:14:59, EDIT BY MILLER
;TCO 1967. ADD FAST-GET CODE
;<4.MONITOR>MEXEC.MAC.332, 28-Jul-78 15:20:11, Edit by ENGEL
;ELIMINATE NOSKED AT LCTAC2+7 - FIX ARPA NSKDIS PROBLEM
;<4.MONITOR>MEXEC.MAC.331, 27-Jul-78 13:18:35, Edit by PORCHER
;FIX ILL WRITE TO CHECKPOINT FILE AT USGIN7...
;<4.MONITOR>MEXEC.MAC.330, 20-Jul-78 09:51:55, Edit by ENGEL
;FIX PROBLEM CREATED BY BORCHECK AT STCJB1 - CHANGE HRRZM TO MOVEM AND
; CHANGE THE CAMN TO USE A REGISTER
;<4.MONITOR>MEXEC.MAC.329, 14-Jul-78 12:50:26, EDIT BY MILLER
;CHANGE TODDT TO ENTER MDDT IN SECTION "MSEC1"
;TCO # 1902 - MAKE JOB 0 UPDATE FULL PAGES IN CHECKPOINT FILE
;<4.MONITOR>MEXEC.MAC.327, 6-Jul-78 01:28:45, Edit by JBORCHEK
;MUST SIMULATE SOME OF THE ARPA TABLES NOW
;<4.MONITOR>MEXEC.MAC.325, 28-Jun-78 11:10:22, EDIT BY OSMAN
;ADD .JIT20/.SJT20 - TCO # 1927
;<4.MONITOR>MEXEC.MAC.324, 26-Jun-78 02:23:37, Edit by JBORCHEK
;FIX HSTSTS TABLE SIZE
;<4.MONITOR>MEXEC.MAC.323, 23-Jun-78 15:44:36, EDIT BY OSMAN
;FREEZE FORKS ON "^P" ONLY. (USED TO FREEZE ON "^EQUIT" TOO)
;TCO 1926
;<4.MONITOR>MEXEC.MAC.322, 21-Jun-78 00:34:01, Edit by MCLEAN
;ADD GOKLCK
;<4.MONITOR>MEXEC.MAC.321, 20-Jun-78 15:05:48, Edit by ENGEL
;ELIMINATE THE JSBSTF CALL AT JOBCF1
;<4.MONITOR>MEXEC.MAC.320, 14-Jun-78 06:01:38, Edit by JBORCHEK
;DELETE ERROR MSG DUE TO BUGTP=0
;<4.MONITOR>MEXEC.MAC.319, 13-Jun-78 13:31:59, EDIT BY MILLER
;SHUFFLE CODE AROUND GSMLER TO MAP MMAP INTO BOOT SPACE BEFORE LOCKING
;<4.MONITOR>MEXEC.MAC.318, 3-Jun-78 17:02:25, Edit by GILBERT
;Suppress SSAVE flags to DDT typeout
;<4-NEW>MEXEC.MAC.317, 1-Jun-78 17:17:15, Edit by FORTMILLER
;START BOOT AT LAST INSTRUCTION ON LAST PAGE
;<4.MONITOR>MEXEC.MAC.316, 31-May-78 13:45:43, Edit by KIRSCHEN
;MAKE RESTART SYSERR ENTRY EVEN IF NO OPERATOR ENTRY OF DATE AND TIME
;<4.MONITOR>MEXEC.MAC.315, 18-May-78 14:32:55, Edit by KIRSCHEN
;<3A.MONITOR>MEXEC.MAC.21, 16-May-78 13:07:48, EDIT BY MILLER
;TCO 1887. ADD NSWPGS GETAB ENTRY
;<4.MONITOR>MEXEC.MAC.313, 13-May-78 13:14:00, Edit by HALL
;TCO 1900 - CALL ATSINI AT RUNDD7
;<4.MONITOR>MEXEC.MAC.312, 20-Apr-78 14:41:02, EDIT BY MILLER
;MAKE SURE T3 HAS DIR NUMBER IN IT AT ATACH6
;<4.MONITOR>MEXEC.MAC.311, 9-Apr-78 01:59:06, Edit by BORCHEK
;CRJOB FIXES AT STCJB1
;<4.MONITOR>MEXEC.MAC.310, 3-Mar-78 09:56:48, EDIT BY MILLER
;DETERMINE LOW MESSAGE BY COMPARING AGAINST SYWRND
;<4.MONITOR>MEXEC.MAC.309, 1-Mar-78 13:46:08, Edit by PORCHER
;<4.MONITOR>MEXEC.MAC.308, 1-Mar-78 12:04:36, Edit by PORCHER
;Move accounting shift change initialization to before SETSPD
;<4.MONITOR>MEXEC.MAC.307, 28-Feb-78 17:29:08, Edit by PORCHER
;<4.MONITOR>MEXEC.MAC.306, 28-Feb-78 13:14:17, Edit by PORCHER
;<4.MONITOR>MEXEC.MAC.305, 28-Feb-78 11:32:10, Edit by PORCHER
;Bug fixes for accounting shift changes . . .
;<4.MONITOR>MEXEC.MAC.303, 20-Feb-78 12:24:56, Edit by PORCHER
;<4.MONITOR>MEXEC.MAC.302, 20-Feb-78 11:20:53, Edit by PORCHER
;Add stuff for accounting shift changes
;<4.MONITOR>MEXEC.MAC.301, 16-Feb-78 09:21:29, Edit by PORCHER
;Add stuff for session runtime and console time
;<4.MONITOR>MEXEC.MAC.300, 31-Jan-78 00:34:24, Edit by MCLEAN
;ADD MTA ON LINE REQUEST OF SETSPD
;<4.MONITOR>MEXEC.MAC.299, 28-Jan-78 23:15:18, Edit by PORCHER
;Make GETs of PA1050 and RMS come from SYS: if execute-only
;<4.MONITOR>MEXEC.MAC.298, 28-Jan-78 18:23:39, Edit by PORCHER
;<4.MONITOR>MEXEC.MAC.297, 28-Jan-78 17:37:53, Edit by PORCHER
;<4.MONITOR>MEXEC.MAC.296, 28-Jan-78 17:29:08, Edit by PORCHER
;Add execute-only GET code
;<4.MONITOR>MEXEC.MAC.295, 25-Jan-78 13:30:58, EDIT BY MILLER
;FIX TYPEO IN SYSJOB CHANGE
;<3A.MONITOR>MEXEC.MAC.15, 25-Jan-78 13:26:13, EDIT BY MILLER
;USE NEW RUNDIR ROUTINE TO RUN SYSJOB
;<3A.MONITOR>MEXEC.MAC.14, 25-Jan-78 12:48:19, EDIT BY MILLER
;RUN MOS DIAG IN JOB 0 AND AT SYSTEM STARTUP
;<4.MONITOR>MEXEC.MAC.292, 3-Jan-78 16:14:50, EDIT BY MILLER
;<4.MONITOR>MEXEC.MAC.291, 3-Jan-78 16:13:44, EDIT BY MILLER
;FIX MAPPING OF EPT FOR BOOT TO USE SETMPG
;<3-MONITOR>MEXEC.MAC.287, 13-Dec-77 16:23:59, Edit by HESS
;TCO 1889 - FIX TO SESSION END LOGGING
;<4.MONITOR>MEXEC.MAC.289, 6-Dec-77 20:53:30, EDIT BY MCCLURE
;CALL DUPINI
;<3.SM10-RELEASE-3>MEXEC.MAC.9, 5-Dec-77 12:59:52, EDIT BY MILLER
;DON'T RECORD "ALLOCATED BUT ZERO" PAGES
;<4.MONITOR>MEXEC.MAC.287, 5-Dec-77 12:23:04, EDIT BY MILLER
;MOVE RQTAD1 SET UP TO DTESRV
;<3.SM10-RELEASE-3>MEXEC.MAC.7, 5-Dec-77 10:33:20, EDIT BY MILLER
;DON'T SAVE ALL ZERO PAGES.
;<3-MONITOR>MEXEC.MAC.286, 17-Nov-77 16:01:05, EDIT BY KIRSCHEN
;FIX TYPO ON PREVIOUS EDIT
;<4.MONITOR>MEXEC.MAC.284, 10-Nov-77 23:53:27, EDIT BY BOSACK
;UPDATE DDTPRS IN ULKINI
;<4.MONITOR>MEXEC.MAC.283, 6-Nov-77 16:11:32, Edit by MCLEAN
;ADD CODE FOR RELOAD ON KS
;<4.MONITOR>MEXEC.MAC.282, 26-Oct-77 17:34:31, EDIT BY CROSSLAND
;FIX SO THAT SYSTEM GOING DOWN IN 2 HOURS MESSAGES OCCURS ONLY ONCE
;INCREASE OVERHEAD PAGES DURING BOOT PHASE TO ALLOW MONMIN TO WORK
;<4.MONITOR>MEXEC.MAC.281, 23-Oct-77 20:15:56, EDIT BY CROSSLAND
;MAKE HALT MESSAGE ONLY COME OUT 2 HOURS BEFORE HALT
;<4.MONITOR>MEXEC.MAC.280, 20-Oct-77 13:11:47, EDIT BY HURLEY
;FIX ATTACH AC CLOBBERAGE
;<4.MONITOR>MEXEC.MAC.279, 5-Oct-77 13:08:35, Edit by HESS
;JOB 0 - SEND MESSAGE TO PULSAR WHEN MTA STATUS CHANGE FLAG SET
;COPYRIGHT (C) 1976,1977,1978,1979 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
SEARCH PROLOG,SERCOD,ACTSYM
TTITLE MEXEC
EXTN <MOSULE,HNGU0F,HNGU1F>
;SWAPPABLE MONITOR ROUTINES, JSYS'S, ETC. - D. MURPHY
;AC DEFINITIONS USED HEREIN
DEFAC (FX,Q3) ;FORK INDEX
;NOTE: THE NEXT TWO LOCATIONS MUST BE TOGETHER. GETAB REQUIRES IT
RSI LOGDES,LOGTTY ;DESIGNATOR FOR LOG MSGS - DEF IN PARAMS
RSI JB0TT,0 ;DESIG FOR JOB 0 AND ERR MSGS
MICHN==:1B34+1B35 ;CHANNELS THAT MONITOR ENABLES
EXWTIM==:^D120 ;NUMBER MINUTES BETWEEN AUTO EXPUNGES
SWAPCD
;LINKAGE TO MDDT
MDDT=:<MSEC1,,MDDTX> ;TRY TO START IN SECTION 1
;REGULAR SUBSYSTEM NAMES FOR INCLUSION IN SNAMES TABLE AT STARTUP
SBSNMS: SIXBIT /EXEC/
SIXBIT /(PRIV)/
NSBSNM==.-SBSNMS
;TABLE DEFINES SPECIAL PURPOSE FOR FIRST FEW JOBS
SPECJT: XWD 0,RUNDD ;JOB 0 IS ALWAYS DISK CHECKER, ETC.
NSPECJ==.-SPECJT ;NUMBER OF SPECIAL JOBS
RESCD
;CODE TO INITIALIZE JOB ON FIRST STARTUP. ALSO INVOKES SYSTEM
;INITIALIZATION IF FIRST JOB AFTER SYSTEM STARTED FROM SCRATCH
;SYSIFG IS 0 WHEN SYSTEM IS JUST STARTING
EXEC0:: MOVX 1,LOGIOB ;SAY JOB CREATION IN PROGRESS
IORM 1,JOBBIT
SETZM FPC
MOVSI 1,(UMODF) ;SIMULATE CALL FROM USER
MOVEM 1,FFL
MCENTR
SKIPE SYSIFG ;NEW SYSTEM?
JRST GOTSWM ;NO
MOVEI T1,MFRKWD ;GET SPECIAL PRIORITY FOR MONITOR FORKS
MOVEM T1,JOBSKD ;AND SET THIS JOB AS SUCH
CALL SEBINI ;INIT SYSERR FACILITY
CALL FSIINI ;GO MOUNT THE PUBLIC STRUCTURE
CALL SWPINI ;SWAPPER CAN NOW BE INITIALIZED
;IT MUST BE CALLED AFTER NSSUN AND
; THE SDB FOR PS ARE SET UP BY FSIINI
MOVEI T1,PSNUM ;T1/ STRUCTURE NUMBER (PUBLIC STRUCTURE)
MOVEI T2,HOMPGA ;T2/ ADDRESS OF PAGE TO USE FOR BAT BLOCKS
MOVX T3,MI%MSG ;T3/ FLAGS TO TELL OPERATOR, FIX INCONSISTENT
CALL CHKBAT ;AND NOW THE BAT BLOCKS CAN BE CHECKED
; AND THE OVERFLOW SWAPPING ADDRESSES
; IN THE BAT BLOCKS PROCESSED
REPEAT 1,< ;TEMPORARY UNTIL REV 10 IS IN
PUSH P,CASHF ;TURN OFF THE CACHE
CALL CASHOF ;THIS REDUCES PROBLEMS CAUSED BY MAP INST
>
CALL GETSWM ;GET SWAPPABLE MONITOR
REPEAT 1,< ;TEMPORARY UNTIL REV 10 IS IN
POP P,CASHF ;RESTORE CACHE
SKIPE CASHF ;WAS CASH ON BEFORE?
CALL CASHON ;YES, TURN IT BACK ON
>
CALL RESLCK ;LOCK DOWN SOME RESIDENT FREE SPACE
SKIPE VSMFLG ;SWAP MONITOR NEED TO BE FORCED OUT TO DISK?
JRST [ SETOM SKEDFC ;YES, FORCE IT ALL TO HAPPEN
MOVEI T1,1000 ;1 SECOND OF SLEEP TIME
DISMS ;SHOULD BE LONG ENOUGH FOR THE SWAPABLE
;MONITOR TO GET OUT, WITH OUT ANY PROBLEMS.
SETZM VSMFLG ;STOP FORCING DATA VERIFICATION
SETZM SKEDFC ;MAKE SURE WE DONT SPEND EXTRA TIME SWAPPING, TOO
JRST .+1] ;BACK TO THE MAIL LINE CODE
;AT THIS POINT THE SWAPPABLE MONITOR HAS BEEN LOADED. IF THE MONITOR WAS
;STARTED AT 144, IT HAS ALSO BEEN SWAPPED OUT TO THE DISK.
; IF IT IS DESIRABLE TO PATCH THE SWAPPABLE MONITOR A BREAKPOINT CAN
; BE PUT HERE. NO PART OF THE SWAPPABLE MONITOR WILL HAVE BEEN EXECUTED YET.
;INITIALIZE THE FORK STRUCTURE FOR THIS JOB. ASSIGN FIRST WORD OF FKPTRS
;AND SYSFK TO THIS FORK. MAKE EACH REMAINING WORD OF FKPTRS POINT TO NEXT
;AVAILABLE SLOT AND FREJFK POINT TO THE FIRST AVAILABLE SLOT
;INITIALIZE REMAINING WORDS OF SYSFK TO -1
GOTSWM: MOVEI 1,FKPTRS ;1/NAME OF FORK STRUCTURE LIST
MOVEI 2,NUFKS ;2/NUMBER OF WORDS IN LIST
CALL ILIST ;INITIALIZE FREE WORDS IN FKPTRS
MOVE 1,0(1) ;POINT TO SECOND FREE SLOT
MOVEM 1,FREJFK ;MAKE FREE LIST START WITH SECOND SLOT
SETZM FKPTRS ;TAKE FIRST SLOT FO THIS FORK
MOVE 1,FORKX ;GET SYSTEM-WIDE INDEX FOR THIS FORK
HRRZM 1,SYSFK ;STORE IN JOB STORAGE AREA
;Note that this clears all the flag bits
; (defined in FORK) in LH of SYSFK
MOVEI T1,NUFKS-2 ;T1/ NUMBER OF WORDS TO COPY
MOVEI T2,SYSFK+1 ;T2/ STARTING SOURCE WORD
SETOM (T2) ;INITIALIZE IT TO -1
MOVEI T3,1(T2) ;T3/ STARTING DESTINATION WORD
CALL XBLTA ;INITIALIZE BLOCK TO -1 (EXCEPT FIRST WORD)
MOVE T1,[JTBIFR] ; Initialize JTB free bit table
MOVEM T1,JTBFRE ; ..
SETOM FKLOCK ;INIT FORK LOCK FOR THIS JOB
SETZM FLKCNT ;CLEAR NEST COUNT
SETOM FLKOWN ;CLEAR OWNING FORK
;SET UP FOR INTERRUPTS TO BE PROCESSED BY THE MONITOR
;IF AN INTERRUPT OCCURS ON A CHANNEL WHOSE BIT IS SET IN MONCHN,
;THE MONITOR WILL GO TO EXECI
;CHANNELS 34 AND 35 ARE ACTIVATED HERE, AND CTRL/P IS ASSIGNED
;TO THEM IN THE MINI-EXEC
SETOM TTJTIW
MOVE 1,[XWD ITFFL,EXECI] ;GO TO EXECI ON INTERRUPT
MOVEM 1,MONBK
MOVEI 1,400000 ;1/THIS FORK
MOVEI 2,MICHN ;2/CHANNELS TO ENABLE
MOVEM 2,MONCHN ;MAKE THE MONITOR TAKE INTERRUPTS ON THEM
AIC ;ACTIVATE CHANNELS 34 AND 35
;**;[3115] ADD 2 LINES AT GOTSWM:+35L TAM 31-MAY-84
MOVE T1,FORKN ;[3115] GET RELATIVE FORK NUMBER
CALL SETVGN ;[3115] RESTORE VIRGINITY!!
JRST JBI0 ;CONTINUE IN SWAPPABLE CODE
;JOB INITIALIZATION...
;SYSIFG IS 0 IF SYSTEM IS BEING STARTED
;**;[3115] ADD 1 LINE AT JBI0:-3L TAM 8-JUN-84
RSI SPJCAP,<SC%CTC!SC%GTB!SC%LOG!SC%SCT!SC%SUP!SC%WHL!SC%OPR!SC%CNF!SC%MNT!SC%IPC!SC%ENQ!SC%NWZ!SC%NAS!SC%DNA!SC%ANA> ;[3115] SPECIAL JOB CAPS
SWAPCD
JBI0: CALL JBFINI ;INIT FILE SYS FOR THIS JOB
SKIPE SYSIFG ;SYSTEM INITIALIZED?
JRST SYSINE ;YES
;SYSTEM IS BEING STARTED. DO ONCE-ONLY INITIALIZATION
;**;[3115] ADD 3 LINES AT JBI0:+6L TAM 31-MAY-84
MOVE T1,SPJCAP ;[3115] GET SPECIAL JOB CAPS
MOVEM T1,CAPENB ;[3115] ENABLE ALL CAPABILITIES FOR INIT
MOVEM T1,CAPMSK ;[3115] HERE TOO
SETOM FGLOCK ;INIT FAST GET LOCK
SETOM SYLNLK ;INIT SYSTEM LOGICAL NAME LOCK
SETOM CRJLCK ;INIT LOCK OF CRJOB DATA BASE
CALL FILINI ;INIT FILE SYSTEM
SETOM GOKLCK ;INIT GETOK LOCK
SETOM TIMLCK ;INIT LOCK ON TIMER Q'S
MOVE 1,[XWD SBSNMS,SNAMES]
BLT 1,SNAMES+NSBSNM-1 ;MOVE REGULAR SUBSYSTEM NAMES TO TABLE
MOVNI 1,NSBSNM ;INIT TABLE POINTER WITH NEG COUNT
MOVEM 1,SNMPT
SETOM SNMLCK ;AND INIT LOCK
MOVE T1,[JOBONT,,JOBONT+1]
SETOM JOBONT ;NO JOBS ARE YET OWNED BY ANYONE
BLT T1,JOBONT+NJOBS-1 ; ..
CALL PIDINI ;INITIALIZE THE IPCF DATA BASE AND FORKS
CALL SLNINI ;INITIALIZE SYSTEM LOGICAL NAMES
SETOM UTLOCK ;INITIALIZE THE UTEST JSYS DATA BASE
CALL GETNAM ;INITIALIZE STRING CONTAINING
; MONITOR VERSION AND NAME
CALL NAMINI ;INITIALIZE NODE NAME TO "TOPS20", IF DECNET
MOVEI T1,TMZONE ;INITIALIZE TIMZON
MOVEM T1,TIMZON
SETOM ACTLCK ;INITIALIZE LOCK ON ACCT WINDOW PAGES
SETOM ACTOFN ;NO OFN FOR ACCT VALIDATION DATA FILE YET
SETOM AVALON ;ALWAYS TURN ON ACCT VALIDATION TILL STATED OTHERWISE
; ..
;JOB INITIALIZATION...
;THIS CODE IS REACHED FOR ALL JOBS, INCLUDING FIRST ONE AFTER SYSTEM
;STARTUP
SYSINE: MOVE T1,JOBNO ;INITIALIZE THE PID QUOTA
CALL PIDJBI ; AND SEND QUOTA
CALL ENQJBI ;INITIALIZE ENQ/DEQ QUOTA
MOVE T1,JOBNO ;GET JOB NUMBER
SETZM CRJFLG ;ASSUME NOT A CREATE-JOB STARTUP
HLRZ T2,JOBPT(T1) ;CHECK FOR SPECIAL STARTUP FLAG
CAIE T2,-2 ;FROM CRJOB?
JRST SYSIN1 ;NO. NORMAL STARTUP.
MOVE T2,CRJTTY ;CRJOB. HERE IS THE REQUESTED TTY.
HRLM T2,JOBPT(T1) ;PUT IT IN JOBPT OF NEW JOB.
MOVEM T2,CTRLTT ;AND IN THE JSB
SETOM CRJFLG ;FLAG IN JSB THIS IS A CRJOB STARTUP
SYSIN1: JUMPL T2,SYSIN2 ;JUMP IF JOB IS DETACHED
CALL TTYASN ;ASSIGN CONTROLLING TTY
JRST SYSIN9
MOVE T2,CTRLTT ;GET TTY NUMBER
CALL TTCKSP ;GO SEE IF SPEED SETTING NEEDED
SYSIN2: MOVE T1,TODCLK
MOVEM T1,CONSTO ;SET CONSOLE TIME ON
CALL LGTAD
MOVEM T1,CTIMON ;SET DATE/TIME CONNECT
SETZM JSSRTM ;Reset session runtime
SETZM JSSCTM ; and session console time
MOVE T1,[OURNAM,,LLSR] ;BLT POINTER TO INITIALIZE NODE NAME
BLT T1,LLSR+WPN-1 ;MAKE JOB'S NODE NAME BE OUR LOCAL NAME
MOVX T1,LOGIOB ;SAY JOB CREATION FINISHED
ANDCAM T1,JOBBIT
;JOBS 0 THROUGH NSPECJ-1 ARE SPECIAL. SPECJT CONTAINS ADDRESS TO WHICH
;TO TRANSFER. FOR NOW, ONLY JOB 0 IS SPECIAL, AND IT GOES TO RUNDD.
;SEE IF THIS IS A SPECIAL JOB
MOVE 1,JOBNO ;FIRST FEW JOBS ARE SPECIAL,
CAIGE 1,NSPECJ ;IS THIS ONE OF THEM?
JRST [ MOVEI 2,OPERDN ;YES, GET DIRECTORY NUMBER OF <OPERATOR>
HRRM 2,JOBDIR(1) ;INDICATE LOGGED IN AS <OPERATOR>
STOR 2,JSDIR ;SAVE AS CONNECTED DIRECTORY
SETZRO JSCDF ;NO STRING IN JSB
MOVE 2,STRTAB+PSNUM ;GET SDB ADDRESS OF PRIMARY STRUCTURE
LOAD 2,STRUC,(2) ;GET ITS UNIQUE STRUCTURE CODE
STOR 2,JSUC ;SAVE AS CONNECTED STRUCTURE CODE
MOVE 2,[[3
ASCIZ "OPERATOR"],,USRNAM]
BLT 2,USRNAM+2 ;SET UP DEFAULT USER NAME STRING
HRRZ 2,SPECJT(1)
JRST 0(2)] ;GO DO THE SPECIAL FUNCTION
;NOT A SPECIAL JOB. SET UP TERMINAL INFORMATION
MOVE A,CTRLTT ; GET CONTROLLING TERMINAL
JUMPL A,SYSINP ;NO TTY. DON'T INIT TTY PARAMETERS
CALL CHKPTY ;IS IT A PTY?
SKIPA ;NO. INIT TTY PARAMETERS
JRST SYSINP ;YES. DON'T INIT TTY PARAMETERS
MOVEI 1,100
MOVEI 2,3B33 ;SET TO HDX HERE, SO SETTING TO FDX
STPAR ;BELOW WILL FORCE OUT TELNET CONTROL
MOVE 2,NORMTF ;GET TTY TO STANDARD STATE
SFMOD
STPAR ;SET DEVICE PARAMETERS TOO
MOVE B,CTRLTT ;GET CONTROLLING TERMINAL
CALL CHKNVT ;IS IT A NETWORK TTY,
SKIPA 2,NORMTY ;NO. INIT TERM TO STANDARD TYPE
MOVE T2,[.TTIDL] ;MAKE IT "IDEAL" TERMINAL
STTYP
MOVE 2,TTICB1
MOVE 3,TTICB2
SFCOC
HRLOI T1,(TL%CRO+TL%COR+TL%SAB+TL%ABS+TL%STA)
MOVE T2,CTRLTT ;Get controlling TTY#
CAMN T2,CTYLNO ;Starting job on CTY?
TXZ T1,TL%ABS ;Yes - so set refuse links
MOVEI T2,-1 ;ALL REMOTE
TLINK ;BREAK LINKS, CLEAR ACCEPT
JFCL
;GO START THE EXEC. IF SYSTEM IS STAND-ALONE, TELL THE USER
SYSINP: SKIPE CRJFLG ;IF CREATED JOB, GO SET IT UP.
JRST STCRJB ; ..
MOVE T1,DBUGSW
CAIGE 1,2 ;DEBUG MODE OPERATION?
JRST STEX ;NO, GO START EXEC
TMSG <
[Caution--System is stand-alone]
>
JRST STEX ;WARN USERS FIRST
SYSIN9: SETOM CTRLTT ;INDICATE DETACHED SO LOGOUT WON'T
MOVE T2,JOBNO ; TRY TO WRITE ON THIS TERMINAL
HRROS JOBPT(T2) ;..
SKIPL CRJFLG ;IS THIS JOB BEING CREATED BY CRJOB JSYS?
JRST FLOGO1 ;NO. GO KILL THE JOB
MOVEM T1,CRJANS ;YES. SAVE ERROR CODE FROM TTYASN
JRST LOGO ;GO KILL THE JOB
;HERE AT STARTUP OF JOB BY CRJOB JSYS.
STCRJB: MOVE Q1,JOBNO ;CARRY AROUND MY JOB NUMBER
HRLM Q1,CRJONJ ;TELL CREATOR, IF WE GET THERE.
MOVE Q2,CRJAC1 ;AND CONTROL FLAGS OF CRJOB AC1
MOVE T1,CRJONJ ;GET CREATOR'S JOB NUMBER
TXNE Q2,CJ%OWN ;CREATOR WANTS TO OWN ME?
MOVEM T1,JOBONT(Q1) ;YES. REMEMBER WHO HE IS.
MOVE T1,CRJSLO ;SIGNAL ON LOGOUT?
TXNN Q2,CJ%SLO ; ..
MOVEI T1,0 ;NO. CLEAR THE PID
MOVEM T1,JSLOPD ;SAVE THE PID FOR THE SIGNAL
JN CJ%LOG,Q2,STCJB1 ;JUMP IF WANTS TO LOG IN
HRRZ T1,CRJONJ ;NO LOGIN, GET CREATOR'S JOB NUMBER
HRRZ T1,JOBDIR(T1) ; TO FETCH CREATOR'S LOGIN DIRECTORY
STOR T1,JSDIR ;AND MAKE IT OUR CONNECTED DIRECTORY
MOVE T1,STRTAB+PSNUM ;POINT TO THE PRIMARY SDB
LOAD T1,STRUC,(T1) ; AND FETCH THE PRIMARY STRUCTURE UNIQUE CODE
STOR T1,JSUC ;SET IN JSB, COMPLETING CONNECT TO PRIMARY STR
SETZM CAPENB ;MAKE SURE I HAVE NO CAPS ENABLED
HLLZS CAPMSK ;OR POTENTIAL
MOVE T1,CRJOJC ;GET OWNING JOB'S CAPS
AND T1,CRJCAM ;MASKED, IF ASKED
TXNE Q2,CJ%CAP ;DOES HE WANT TO GIVE ME HIS?
HRRM T1,CAPMSK ;YES, I'LL TAKE THEM, UNTIL LOGIN JSYS
JRST STCJ1A ;DONE WITH LOGIN-ISH STUFF
;HERE IF CJ%LOG IS ON IN CALL. I AM TO TRY TO LOG THIS JOB IN.
STCJB1: HRROI B,CRJUSR ;POINT TO THE USER NAME STRING
MOVX T1,RC%EMO ;EXACT MATCH ONLY
RCUSR ; AND CONVERT TO USER NUMBER
ERJMP SCJXXX ;PASS FAILURE CODE BACK
TXNE T1,RC%NOM!RC%AMB ;FILES ONLY, NO MATCH OR
JRST SCJXX1 ; AMBIGUOUS? FAIL. CAN'T LOG IN.
MOVEM T3,CRJUSR ;STORE THE NUMBER
HRRZ T3,T3 ;CLEAN FOR CAMN LATER
MOVE T4,CRJOJC ;GET CREATOR'S CAPS
HRRZ T1,CRJONJ ;AND JOB NUMBER
HRRZ T1,JOBDIR(T1) ;CREATOR'S LOGIN DIRECTORY
TRNN T4,SC%WHL!SC%OPR ;PRIVILEGED CREATOR?
CAMN T1,T3 ;OR LOGGING IN AS SAME USER?
JRST STCJ1E ;YES. NO NEED FOR PSWD CHECK.
TXZE Q2,<CJ%NPW!CJ%NUD> ;NO, SO REQUIRE PASSWORD, AND LOGIN DATE
JRST [ MOVEI T1,CRJBX1 ;ILLEGAL REQUEST
JRST SCJXXX]
STCJ1E: LOAD T1,CJ%ACT,Q2 ;WHAT KIND OF ACCOUNT DO WE USE?
CAIE T1,.CJUCA ;USE CURRENT ACCOUNT OF CREATOR
CAIN T1,.CJUAA ;OR ARG BLOCK ACCOUNT?
JRST STCJ1C ;YES, IT'S IN THE COMMON STORAGE.
SETZM CRJACT ;USE DEFAULT
;FALL THRU
;CAN FALL IN
STCJ1C: MOVEI T1,0 ;BUILD FLAGS FOR LOGIN JSYS
TXNE Q2,CJ%NPW ;NO PASSWORD NEEDED?
TRO T1,1 ;RIGHT.
TXNE Q2,CJ%NUD ;NO UPDATE LOGIN DATE?
TRO T1,2 ;RIGHT. TELL LOGIN.
HRRM T1,CRJFLG ;STORE FOR IT TO SEE
MOVE T1,CRJUSR ;LET'S DO THE LOGIN NOW.
HRROI T2,CRJPSW ;PASSWORD, IF ANY.
MOVE T3,CRJACT ;AND ACCOUNT
LOGIN ;SEE IF THIS IS ALL VALID.
JRST SCJXXX ;APPARENTLY NOT.
;**;[2864]Replace 3 lines with 6 at STCJ1C + 11L RWW 8-NOV-82
TXNN Q2,CJ%CAP ;[2864]test if CAP flag is on
JRST STCJ1A ;[2864]no, skip over the rest
MOVE T1,CRJOJC ;[2864]get caller's caps back
AND T1,CAPMSK ;[2864]AND them with user's available caps
HLL T1,CAPMSK ;[2864]copy cap allowed to LH of new jobs caps
MOVEM T1,CAPENB ;[2864]save caps enabled
STCJ1A: MOVE T2,CRJCPU ;GET TIME LIMIT FOR THIS JOB
JUMPE T2,SCJBNL ;JUMP IF NO LIMIT
MOVE T1,[.FHJOB,,.TIMRT] ;SET TIME LIMIT FOR JOB
MOVEI T3,.ICMSE ;ON MACHINE-SIZE EXC CHANNEL, SO PANIC
TIMER ;DO IT
JRST SCJXXX ;GIVE BACK FAILURE
SCJBNL: MOVEI T1,.FHSLF ;SET UP TO DO SPJFN
MOVE T2,CRJPJF ;FROM THIS ARGUMENT
TXNE Q2,CJ%FIL ;IS THERE BOTH AN EXEC AND AN INFERIOR?
TXNN Q2,CJ%ETF ; ..
SKIPA ;NO. DO THE SPJFN HERE.
JRST STCJ1D ;YES. ONLY DO THE SPJFN ON THE INFERIOR
TXNE Q2,CJ%SPJ ;REQUESTED TO DO SPJFN?
SPJFN ;YES, DO IT.
STCJ1D: HLLZS CRJFLG ;NO FLAGS FOR A LATER LOGIN
TXNN Q2,CJ%FIL ;WANT TO RUN A FILE?
JRST CJSTEX ;NO. JUST GO GET THE EXEC.
STCJB2: TXNE Q2,CJ%ETF ;WANT A FILE. AN EXEC TOO?
JRST STCJB3 ;YES.
MOVX T1,GJ%OLD!GJ%SHT ;GET THE REQUESTED FILE IN TOP FORK
HRROI T2,CRJFIL ;POINT TO THE TEXT
GTJFN ;GET JFN FOR REQUESTED FILE
JRST SCJXXX ;CAN'T
HRLI T1,.FHSLF ;OK, GET IT INTO THIS FORK.
GET
ERJMP SCJXX4 ;IF GET FAILS, QUIT.
;NOTE: THIS CODE RUNS IN SECTION 0 FOR SOME UNKNOWN REASON. IN
;ORDER FOR THIS CALL TO BLTMU TO WORK CORRECTLY, THIS CODE TEMPORARILY
;ENTERS SECTION 1. IF STRCJB IS MADE TO RUN ENTIRELY IN SECTION 1, THESE
;MACROS SHOULD BE REMOVED.
SE1ENT
MOVEI T1,20 ; Length of AC block
XMOVEI T2,CRJFAC ; From there
SETZ T3,
TXNE Q2,CJ%ACS ;AC SET REQUESTED?
CALL BLTMU
SE0ENT
MOVEI T1,.FHSLF ;GET THE ENTRY VECTOR
GEVEC ;GET THE ENTRY VECTOR
TLNN T2,777000 ;TOPS10 STYLE?
JRST STCJ2A ;NO. TOPS20 STYLE, IF ANYTHING.
HRRZ T3,CRJEVO ;OLD STYLE. WHERE DOES START POINT?
CAILE T3,1 ;START OR REENTER, I HOPE.
JRST SCJXX3 ;NO. FAIL.
UMOVE T2,120 ;GET JOBSA
TRNE T3,-1 ;OR IF 1,
UMOVE T2,124 ;GET JOBREN
SKIPA
STCJ2A: ADD T2,CRJEVO ;NEW STYLE, ADD OFFSET TO BASE.
HRRZM T2,-1(P) ;WHERE MRETN WILL GO.
HRLI T2,1 ;INDICATE JOB HAS ALREADY SET CRJANS
HLLM T2,CRJFLG ; BY MAKING FLAG POSITIVE
SETOM CRJANS ;SAY WE HAVE SUCCEEDED.
PUSHJ P,SCJWTA ;WAIT FOR ATTACH, IF WANTED
JRST MRETN ;AND GO TO USER MODE.
;HERE IF WANT BOTH A FILE AND AN EXEC.
STCJB3: MOVX T1,GJ%OLD!GJ%SHT ;GET A JFN FOR THE FILE.
HRROI T2,CRJFIL ;WITH SUPPLIED NAME
GTJFN
JRST SCJXXX ;CAN'T FIND THE FILE.
PUSH P,T1 ;SAVE JFN A MOMENT
MOVX T1,CR%CAP ;CREATE THE NEW FORK, MY CAPS.
TXNE Q2,CJ%ACS ;WANT SOME AC'S LOADED?
TXO T1,CR%ACS ;YES, HAVE CFORK LOAD THEM.
MOVEI T2,CRJFAC ;HERE ARE THE AC'S
CFORK ;MAKE ME A FORK! (YOU'RE A FORK)
JRST SCJXX2 ;CAN'T DO IT.
EXCH T1,0(P) ;GET BACK JFN, SAVE FHANDLE
HRL A,0(P) ;SET UP FOR THE GET
GET
ERJMP SCJXX2 ;CAN'T GET THE FILE
MOVE T1,0(P) ;HANDLE OF INFERIOR
MOVE T2,CRJPJF ;PRIMARY I/O FOR IT
TXNE Q2,CJ%SPJ ;IF REQUESTED,
SPJFN ;SET IT.
POP P,T1 ;INFERIOR FORK HANDLE.
HRLZS T1 ;FORK,,0
HRR T1,CRJEVO ;WHERE TO START IT.
CJSTEX: CALL SCJPRA ;SET UP PRARG FOR EXEC
;**;[3115] REMOVE 3 LINES AT CJSTEX:+1L TAM 31-MAY-84
;[3115] HRLI T2,1 ;INDICATE JOB HAS ALREADY SET CRJANS
;[3115] HLLM T2,CRJFLG ; BY MAKING FLAG POSITIVE
;[3115] SETOM CRJANS ;DONE WITH THE JSYS
;**;[6733] MAKE CHANGES AT CJSTEX:+4L TAM 6/37/85
CALL STEX ;[6733] GET EXEC
HRLI T2,1 ;[6733] INDICATE JOB HAS ALREADY SET CRJANS
HLLM T2,CRJFLG ;[6733] BY MAKING FLAG POSITIVE
SETOM CRJANS ;[6733] DONE WITH THE JSYS
CALL SCJWTA ;[6733] WAIT FOR ATTACH, IF REQUESTED
JRST GEX1 ;[6733] AND START THE EXEC.
;CALL THIS ROUTINE BEFORE GOING TO MRETN FROM CRJOB PATHS. IT WILL
;WAIT FOR JOB TO BECOME ATTACHED, IF THAT'S REQUESTED BY CALLER.
SCJWTA: TXNN Q2,CJ%WTA ;WANT TO WAIT?
RET ;NO.
MOVE T1,JOBNO ;YES. GET MY JOB NUMBER
MOVEI T1,JOBPT(T1) ;AND JOBPT SLOT FOR THIS JOB
CALL DISGE ;WAIT FOR LH TO BECOME POSITIVE
RET ;NOW ATTACHED. RETURN.
SCJXX3: MOVEI T1,SFRVX1 ;BAD ENTRY VECTOR OFFSET
JRST SCJXXX ;RETURN THAT ERROR
SCJXX2: POP P,0(P) ;ADJUST STACK POINTER
SCJXX4: HRRZ T1,LSTERR ;AND RETURN THIS FORK'S LAST ERROR
JRST SCJXXX ; TO CREATOR
SCJXX1: MOVEI T1,CRJBX5 ;UNKNOWN NAME FOR LOGIN
SCJXXX: SKIPGE CRJFLG ;IS THIS JOB BEING CREATED
HRRZM T1,CRJANS ;YES. SET RH NON-ZERO.
MOVE T1,JOBNO ;MAKE SURE I'M NOT OWNED, SO
SETOM JOBONT(T1) ;THIS LOGOUT CAN GO THROUGH
JRST LOGO ;AND KILL OFF THIS STARTED JOB.
;ROUTINE TO SET UP PRARG FOR EXEC TO READ IN NEW JOB
NCJPRA==3 ;NUMBER OF ARGUMENT ITEMS
LCJPRA==6 ;LENGTH OF BLOCK TO SET
SCJPRA: TRVAR <<SCJPRB,10>> ;SPACE TO BUILD PRARG BLOCK
PUSH P,T1 ;PRESERVE FORKX,,SFRKV OFFSET
MOVEI T1,NCJPRA ;NUMBER OF ARGUMENTS
MOVEM T1,SCJPRB ;INTO THE BLOCK
MOVEI T1,SCJPRB ;POINT TO BLOCK WITH PUSH POINTER
PUSH T1,[1B0+3B6+2B12+CR%PRA] ;I AM A CRJOB PRARG
PUSH T1,[1B0+4] ;WORD 4 IS ANOTHER DATUM
PUSH T1,[1B0+5] ;WORD 5 IS ANOTHER DATUM
MOVE T2,CRJEXF ;FLAGS FOR EXEC IS ONE DATUM
TXNE Q2,CJ%FIL ;IF THERE IS A PROGRAM
TXO T2,1B1 ;TURN ON "THERE'S A FORK" BIT
PUSH T1,T2 ;FLAGS TO ARG BLOCK
POP P,T2 ;RESTORE FORKX,, ENT-VEC-OFFSET
TXNE Q2,CJ%FIL ;IF THERE IS A PROGRAM
PUSH T1,T2 ;PUT IT IN BLOCK
MOVE T1,[.PRAST,,.FHSLF] ; SET MY OWN PRARG BLOCK
MOVEI T2,SCJPRB ;HERE'S THE BLOCK TO SET
MOVEI T3,LCJPRA ;HERE'S ITS LENGTH
PRARG ;SET IT
ERJMP SCJXX4 ;CATCH TRAP IF FAILED
RET ;SUCCESS.
;SYSTEM INITIALIZATION. RUN ONCE ONLY BY JOB 0.
SWAPCD
;**;[3115] ADD 3 LINES AT RUNDD:+0L TAM 31-MAY-84
RUNDD:: MOVE T1,SPJCAP ;[3115] GET SPECIAL JOB CAPS
MOVEM T1,CAPENB ;[3115] ENABLE ALL CAPABILITIES FOR INIT
MOVEM T1,CAPMSK ;[3115] HERE TOO
MOVEI T1,RUNDD3 ;GO TO RUNDD3 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
MOVEI T1,JB0INT ;GO TO THE JOB 0 INTERRUPT HANDLER ON
; INTERRUPT FOR ENABLED CHANNELS
HRRM T1,MONBK ;SET THIS FOR THE SCHEDULER
MOVE T1,CTYLNO ;GET CTY LINE NUMBER
MOVEI T1,.TTDES(T1) ;CONVERT TO 400000+N
MOVEM T1,JB0TT ;CONTROLLING TERMINAL FOR JOB 0
HRRM T1,PRIMRY ;AND PRIMARY OUTPUT FOR US
;**;[3115] REMOVE 2 LINES AT RUNDD:+9L TAM 8-JUN-84
;[3115] MOVSI 1,777
;[3115] ANDCAM 1,CAPENB ;FLUSH ANY SUPERIOR FORK CAPS
CALL ASCINI ;Initialize accounting shift change stuff
CALL RESLCK ;BE SURE ADEQUATE RES FREE SPACE
CALL SERINI ;START SYSERR LOGGING
SKIPN PROFLG ;WANT PRIMARY PROTOCOL?
JRST RUNDI7 ;NO. SKIP ALL PRIMARY STUFF
MOVEI A,.PRIOU ;YES. FIRST WAIT FOR CTY TO STOP
DOBE ;"
CALL TTSPIN ;INITIALIZE TERMINAL SPEEDS TO NULL
CALL PROINI ;TURN ON PRIMARY PROTOCOL
CALL DTRMDS ;TELL -11 NOT TO ANSWER DATA SETS
;TRY TO GET TIME AND DATE FROM THE 11. DTE SERVICE SENDS THE REQUEST TO
;THE 11 AND STORES ITS ANSWER IN TAD11. IF THE 11 DOES NOT KNOW, IT
;RETURNS -1. IN THIS CASE, ASK THE OPERATOR FOR THE TIME. IF THE 11 HAS
;IT, DON'T ASK THE OPERATOR
SKIPE SMFLAG ;IF SM10 THEN WE ALREADY HAVE TIME AND DATE CORRECT
JRST RUNDD3
SETZM TAD11 ;ZERO TIME CELL
CALL RQTAD1 ;REQUEST TIME/DATE FROM 11
JFCL ;THIS FAILURE CAN'T OCCUR
SKIPN TAD11 ;HAS 11 SENT TIME/DATE YET?
JRST .-1 ;NO. WAIT UNTIL IT DOES
MOVE B,TAD11 ;GET TIME SENT FROM -11
SETOM TAD11 ;YES. RESET TO INDICATE NOT SET BY 11
CAMN B,[-1] ;DOES THE -11 HAVE IT?
JRST RUNDI7 ;NO
DMOVE C,TAD11+1 ;YES. GET REST OF IDCNV ARGS
IDCNV ;CONVERT TO INTERNAL
JRST RUNDI7 ;FAILED. GET FROM OPERATOR THEN
MOVEM B,CRSTAD ;LET IT FIND IT LATER
;..
;RUNDD...
;SET SYSTEM TIME AND DATE IF THE 11 PROVIDED IT
;..
RUNDI7: MOVEI 1,101
DOBE
SKIPN 1,CRSTAD ;DO WE HAVE A SAVED TIME FROM CRASH?
JRST [ MOVX A,SF%MST ;NO. SAY IS A MANUAL START
IORM A,FACTSW ;""
JRST RUNDD3]
STAD ;YES, SET IT
JFCL
SETZM CRSTAD
;Initialize checkpoint interval
RUNDD3: MOVEI T1,RUNDI4 ;GO TO RUNDI4 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
MOVE T1,[^D<10*60000>] ;SET DEFALUT CHECKPOINT INTERVAL
MOVEM T1,CKPINV ;...
;RUN SETSPD TO SET LINE SPEEDS, SYSTEM LOGICAL NAMES, OTHER SYSTEM
;PARAMETERS
MOVX T1,GJ%OLD!GJ%SHT!GJ%PHY ;YES. SET LINE SPEEDS
HRROI T2,SETSPD ;GET POINTER TO "SYSTEM:X-SETSPD.EXE"
SETZ T3, ;3/OFFSET 0 IN ENTRY VECTOR
CALL RUNDII ;GO RUN IT
JRST [ HRROI T1,[ASCIZ/
%%No SETSPD
/]
PSOUT
MOVEI T1,.PRIOU ;WAIT UNTIL THE TERMINAL
DOBE ; STOPS SO THE NEXT MESSAGE IS OK
JRST .+1] ;SAY IT FAILED
CALL GETNAM ;DO AGAIN,SINCE SYSTEM: MAY BE REDEFINED
;IF DBUGSW IS 0 OR 1, TELL ALL USERS THAT SYSTEM IS RESTARTING
RUNDD6: MOVE 1,DBUGSW
CAIE 1,0
CAIN 1,1 ;REGULAR STARTUP?
SKIPA
JRST RUNDI4 ;NO, DON'T NOTIFY WORLD
SETO 1,
HRROI 2,[ASCIZ /
System restarting, wait.../]
TTMSG
;..
;RUNDD...
;GET DATE AND TIME FROM OPERATOR UNLESS 11 SENT IT EARLIER
;..
RUNDI4: MOVEI T1,RUNDI1 ;GO TO RUNDI1 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
CALL LGTAD ;DOES SYSTEM HAVE TIME AND DATE?
CAME A,[-1]
JRST RUNDI1 ;YES
RUNDI3: TMSG <
Enter current date and time: >
RUNDI2: CALL RDDGTD ;GET TAD INTO 2
PUSH P,2 ;SAVE TAD JUST ENTERED
TMSG <
You have entered >
MOVEI 1,.PRIOU
MOVE 2,0(P)
MOVX 3,1B1+1B2+1B4+1B5+1B10+1B11+1B17
ODTIM ;TYPE IT IN VERBOSE FORMAT
MOVE 2,0(P)
CAMGE 2,SYSTAD ;IS IT GREATER THAN SYSTEM LOAD TAD?
JRST [ MOVEI 1,.PRIIN ;CLEAR TYPE AHEAD
CFIBF
MOVEI 1,.PRIOU
DOBE ;WAIT FOR TYPE OUT TO STOP
TMSG <,
that cannot be correct.
Please try again in form MMM-DD-YY HHMM >
JRST RUNDI2]
TMSG <,
is this correct (Y,N) >
CALL YESNO ;GET VERIFICATION
JUMPE A,RUNDI3 ;IF 'NO', TRY AGAIN
POP P,1 ;CONFIRMED, RECOVER IT
STAD ;SET IT
JFCL
; ..
;RUNDD...
;DECIDE WHETHER TO RUN CHECKD OR NOT. IF CHKBT FOUND ERRORS, FACTSW HAS
;SF%BTE SET; RUN CHECKD TO DO A BIT TABLE CONSISTENCY CHECK. IF BIT
;TABLE FILE DOESN'T EXIST, MI%ASG IS SET IN SDB. DON'T RUN CHECKD.
;(OPERATOR WILL HAVE TO RUN IT WITH THE REBUILD FUNCTION). IF DOING
;RECONSTRUCTION OF ROOT-DIRECTORY OR REBUILD OF BIT TABLE, STARTF HAS
;MI%BTB SET; RUN CHECKD TO DO A REBUILD OF THE BIT TABLE. IF DOING
;A REFRESH OF THE FILE SYSTEM, DON'T TRY TO RUN CHECKD. IF NONE OF
;THE ABOVE, ASK THE OPERATOR UNLESS AUTO RELOADING. IN ALL CASES,
;ONLY PS IS MOUNTED AT THIS POINT, SO CHECKD IS ONLY RUN ON PS.
;..
RUNDI1: MOVEI T1,RUNDD1 ;GO TO RUNDD1 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
CALL LOGSST ;LOG RESTART IN SYSERR FILE
SKIPN AVALON ;RUNNING ACCOUNT VALIDATION?
JRST RUNDI5 ;NO, PROCEED
CALL ENACT ;INITIALIZE THINGS FOR ACCT VALIDATION
JRST [ TMSG <
<SYSTEM>ACCOUNTS-TABLE.BIN not found - Account validation is disabled
>
SETZM AVALON ;TURN OFF VALIDATION
JRST .+1] ;AND PROCEED
RUNDI5: MOVX T4,MI%BTB ;IF REBUILDING THE BIT TABLE (BIT IS
TDNE T4,STARTF ; SET BY FILINI)
JRST RUNDC2 ;ALWAYS RUN CHECKD IN REBUILD MODE
MOVE 2,DBUGSW ;IF DEBUGGING,
CAIN 2,2
JRST RUNDD2 ;DON'T RUN CHECKD
MOVX T4,MI%RFS ;IF REFRESHING (BIT IS SET
TDNE T4,STARTF ; BY FSIINI)
JRST RUNDD2 ;DON'T RUN CHECKD (IT ISN'T THERE)
MOVE T2,STRTAB+PSNUM ;POINT TO SDB FOR PS
MOVE T2,SDBSTS(T2) ;GET STATUS BITS FOR PS
MOVE T1,FACTSW
TXNE T1,SF%BTE ;BIT TABLE ERRORS?
TXNE T2,MI%ASG ;YES. ARE DISK ASSIGNMENTS PROHIBITED?
SKIPA ;YES. DON'T RUN CHECKD
JRST RUNDC1 ;BIT TABLE ERRORS BUT BT FILE EXISTS. RUN CHECKD
TXNN A,SF%MST ;MANUAL STARTUP?
JRST RUNDD2 ;NO. NO QUESTIONS AND NO CHECKD
;..
;CHECKD NOT REQUIRED. SEE IF OPERATOR WANTS IT
;..
TMSG <Run CHECKD? >
CALL YESNO
JUMPE A,RUNDD2 ;JUMP IF NO
RUNDC1: SKIPA T1,[-1,,[ASCIZ/[Checking file consistency]
/]]
RUNDC2: HRROI T1,[ASCIZ/[Rebuilding bit table]
/]
PSOUT
MOVEI 1,.PRIOU
DOBE
MOVSI 1,(GJ%OLD!GJ%PHY!GJ%SHT)
HRROI 2,[ASCIZ /SYSTEM:CHECKD.EXE/]
MOVX T3,SF%CDR ;SAY CHECKD NOW RUNNING
IORM T3,FACTSW ;DO IT
SETZ T3, ;NORMAL ENTRY POINT
MOVX T4,MI%BTB
TDNE T4,STARTF ;REBUILDING BIT TABLE?
MOVEI T3,3 ;YES. START AT SPECIAL ENTRY POINT
CALL RUNDII ;GO START IT
JRST [ MOVX T1,SF%CDR ;NOT RUNNING
ANDCAM T1,FACTSW
JRST RUNDD1] ;FAILED
SETZM STARTF ;INDICATE STARTUP IS COMPLETE
MOVX T1,SF%CDR ;SAY CHECKD NOT RUNNING ANYMORE
ANDCAM T1,FACTSW ;""
JRST RUNDD2 ;PROCEED
;FAILED TO FIND CHECKD WHEN RUNNING IT WAS REQUIRED BY THE SYSTEM
;OR REQUESTED BY THE OPERATOR. PRETEND THAT IT RAN AND FOUND
;ERRORS. IF IT IS RUN LATER AND FINDS PS TO BE OK, IT WILL CLEAR
;SF%CDE.
;IT ALSO CAUSES THE 'FILE STRUCTURE NEEDS REPAIR' MESSAGE BELOW
;AND PREVENTS SYSJOB FROM DOING ITS USUAL THING
RUNDD1: MOVEI T1,RUNDD2 ;GO TO RUNDD2 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
TMSG <
No CHECKD
>
SETZM STARTF ;INDICATE STARTUP COMPLETED
MOVX T4,SF%CDE ;PRETEND CHECKD FOUND ERRORS
IORM T4,FACTSW
;..
;RUNDD...
;IF DEBUGGING, TELL ALL USERS. IF CHECKD FOUND ERRORS, TELL ALL USERS
;THEN PROCEED AS USUAL
;..
RUNDD2: MOVEI 1,RUNDD7 ;GO TO RUNDD7 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
MOVEI 1,101
DOBE ;WAIT FOR ANY CHECKD OUTPUT
MOVE 1,DBUGSW
CAIL 1,2 ;DEBUG MODE OPERATION?
JRST [ SETO 1, ;YES, DIFFERENT MESSAGE
HRROI 2,[ASCIZ /
[System is stand-alone]
/]
TTMSG
JRST RUNDE1]
MOVX 1,SF%CDE
TDNE 1,FACTSW ;DID CHECKD FIND DISK ERRORS?
JRST [ HRROI 2,[ASCIZ /
[System not in operation - file structure needs repair]
/]
SETO 1,
TTMSG
JRST RUNDE1]
;INITIALIZE SYSERR LOGGING AND START ACCOUNTING
RUNDE1: MOVE 1,JB0TT ;JOB 0 TTY
CAIE 1,377777 ;REAL TTY?
JRST RUNDD4 ;YES
MOVEI 1,ERRPT ;GET NAME OF SYSTEM ERROR FILE
CALL PUTNAM ;ADD STRUCTURE NAME
MOVSI 1,(GJ%FOU!GJ%PHY!GJ%SHT) ;NONE, SO OPEN FILE FOR MESSAGES
HRROI 2,ERRPT ;GET NAME OF SYSTEM ERROR FILE
GTJFN
BUG(NOSERF)
MOVE 2,[44B5+1B20]
OPENF
BUG(SERFOF)
RUNDD4: HRRM 1,PRIMRY ;USE IT FOR OUTPUT
CALL USGINI ;START ACCOUNTING
;..
;RUN SETSPD AGAIN. THIS TIME, START IT AT A SPECIAL PLACE TO MAKE
;IT COPY THE DUMP FILE.
;..
MOVX T1,SF%CDE ;DON'T CREATE DUMP.CPY IF THE BIT
TDNE T1,FACTSW ; TABLE IS BAD
JRST RUNDD7 ;CHECKD FOUND ERRORS IN THE BT
MOVX T1,GJ%OLD!GJ%PHY!GJ%SHT
HRROI T2,SETSPD ;GET POINTER TO "SYSTEM:X-SETSPD.EXE"
MOVEI T3,3 ;3/ OFFSET 3 IN ENTRY VECTOR
CALL RUNDII ;GO RUN IT
JFCL ;IGNORE FAILURE
;DO NETWORK-RELATED FUNCTIONS
RUNDD7: MOVEI T1,RUNDD8 ;GO TO RUNDD8 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
CALL IMPBEG ;START NCP FORK, IF ANY.
CALL KDPINI ;INIT THE KDP(KMC11/DUP11) CODE
CALL NSPINI ;INIT DECNET FORK AND DATA BASE
CALL ATSINI ;INITIAALIZE APPLICATIONS TERMINAL SERVICE
TMSG <
Running DDMP
>
RUNDD8: MOVEI T1,RUNDD5 ;GO TO RUNDD5 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
AOS SYSIFG ;INDICATE NO LONGER IN STARTUP
; (NEXT JOB WON'T GO THROUGH RUNDD)
CALL DONSJ ;START NEXT SPECIAL JOB
;CREATE FORK UNDER JOB 0 AND RUN SYSJOB IN IT. SYSJOB READS A COMMAND
;FILE, WHOSE NAME IS DETERMINED BY THE SETTING OF DBUGSW. IF CHECKD
;HAS NOT BLESSED THE PRIMARY STRUCTURE (SF%CDE IS SET IN FACTSW), SYSJOB
;DOES NOT READ A COMMAND FILE. AMONG OTHER THINGS, THIS WILL PREVENT
;LOGINS FROM TERMINALS OTHER THAN THE CTY
MOVX T1,<GJ%OLD!GJ%PHY!GJ%SHT>
HRROI T2,[ASCIZ /SYSTEM:SYSJOB.EXE/]
SETZM T3 ;MAIN ENTRY POINT
CALL RUNDIR ;RUN SYSJOB AND RETURN
JRST [ TMSG<
No SYSJOB
>
JRST .+1]
RUNDD5: MOVEI 1,1 ;KEEP JOB 0 IN QUEUE 1 ALWAYS
MOVEM 1,JOBBIT ;SET PRIORITY FOR CHKR
MOVEI T1,CHKR ;GO TO CHKR IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
SETZM EXPFRK ;CLEAR FORK HANDLE
SKIPN SMFLAG ;IF NOT 2020
CALL RUNMO1 ; RUN MOS MEM DIAG
JRST CHKR ;GO DO BACKGROUND
;JB0INT - HERE WHEN INTERRUPT OCCURS IN FORK 0
;THIS ROUTINE IS POINTED TO BY MONBK. THE SCHEDULER TRANSFERS
;CONTROL TO HERE WHEN AN INTERRUPT OCCURS ON CHANNEL 34 OR 35 IN
;FORK 0. JB0XFR CONTAINS THE ROUTINE TO WHICH THIS CODE TRANSFERS
;AFTER CLEANING THINGS UP
;NOTE: THIS ROUTINE PRINTS THE CONTENTS OF MONPC, WHICH TYPICALLY
;CONTAINS THE PC AT THE TIME OF THE ERROR. HOWEVER, THIS MAY NOT ALWAYS
;BE THE CASE. THAT'S WHY IT SAYS "PROBABLE PC".
JB0INT: MOVE P,UPP ;RESET THE STACK
ADD P,BHC+4 ; TO SIMULATE JSYS ENTRY
MOVEI 1,<UACB>B39-1 ;SETUP AC BASE
MOVEM 1,ACBAS ; TO POINT TO THE FIRST BLOCK
MOVE P1,MONPC ;SAVE THE PC WHERE ERROR OCCURRED
MOVEI T1,J0EMER ;IN CASE OF EMERGENCY
HRRM T1,MONBK ; DON'T EVEN DO ALL THIS
SETZM NSKED ;BE OKSKED
SETZM CRSKED ;BE NOT 'CRITICAL SECTION'
SETZM SLOWF
SETOM INTDF ;IN CASE OVERLY OKINT
CALL CLRINT ;CLEAR THE INTERRUPT SYSTEM
MOVE T1,FORKX ;T1/ FORK NUMBER
SETZM T2 ;T2/ ALL INTERRUPT LEVELS
CALL JSBSTF ;CLEAN THE JSB STACK
MOVE T1,FORKX ;T1/ FORK NUMBER
SETZM T2 ;T2/ ALL LEVELS
CALL GOKFRE ;CLEAN UP GETOK QUEUES (SHOULDN'T HAVE ANY)
HRROI T1,[ASCIZ /
%MONITOR: Job 0 crash, probable PC /]
PSOUT ;TELL OPERATOR THAT WE DIED
MOVEI T1,.PRIOU ;PRIMARY OUTPUT DEVICE
MOVE T2,P1 ;GET PC AT TIME OF ERROR
MOVEI T3,^D8 ;OCTAL
NOUT ;GIVE THE PC
ERJMP .+1 ;IGNORE ERRORS
HRROI T1,[ASCIZ /, continuing at PC /]
PSOUT ;MORE INFORMATION
MOVEI T1,.PRIOU ;PRIMARY OUTPUT DEVICE
MOVE T2,JB0XFR ;CONTINUATION ADDRESS
MOVEI T3,^D8 ;OCTAL
NOUT ;GIVE THE PC
ERJMP .+1 ;IGNORE ERRORS
HRROI T1,[ASCIZ/, last error was /]
PSOUT
MOVEI T1,.PRIOU ;PRIMARY OUTPUT DEVICE
MOVE T2,LSTERR ;CONTINUATION ADDRESS
MOVEI T3,^D8 ;OCTAL
NOUT ;GIVE THE PC
ERJMP .+1 ;IGNORE ERRORS
HRROI T1,[ASCIZ/
/] ;FINISH WITH A CRLF
PSOUT ;TYPE IT
MOVEI T1,JB0INT ;BACK TO HERE IF ANOTHER INTERRUPT
HRRM T1,MONBK ; NOW THAT WE SURVIVED THIS ROUTINE
MOVE T1,JB0XFR ;SEE WHERE WE ARE TO GO NEXT
JRST 0(T1) ; AND GO THERE
;HERE WHEN AN ERROR OCCURRED WHILE IN JB0INT. GIVE UP.
J0EMER: BUG (STRTER)
;CLRINT - CLEAR THE INTERRUPT SYSTEM
CLRINT: MOVEI 1,400000 ;DEACTIVATE SOFTWARE INTERRUPT CHANNELS
SETO 2, ; FOR THIS PROCESS
DIC
CALL DTIALL ;IN CASE PROGRAM TURNED ANY ON
MOVE 2,PSIBW
CIS ;CLEAR ALL INTERRUPTS IN PROGRESS
RET
;ROUTINE TO RUN A PROGRAM IN A FORK UNDER JOB 0
; A/ GTJFN T1 ARGS
; B/ GTJFN T2 ARGS
; C/ OFFSET IN ENTRY VECTOR WHERE WE START FORK
; CALL RUNDII
; or
; CALL RUNDIR
;RETURNS +1: FAILED, PROGRAM NOT RUN
; +2: RUNDII - PROGRAM RAN TO COMPLETION, FORK KILLED
; RUNDIR - PROGRAM STARTED, A/ FORK HANDLE
RUNDIR: TDZA T4,T4 ;NO WAIT FLAG
RUNDII::SETOM T4 ;WAIT FLAG
STKVAR<EVEC,WFLAG,FKHNDL,FILJFN>
MOVEM C,EVEC ;SAVE OFFSET IN ENTRY VECTOR
MOVEM T4,WFLAG ;SAVE WAIT FLAG
GTJFN
RET ;FAILED
MOVEM T1,FILJFN ;SAVE JFN
MOVX T1,CR%CAP ;XMIT CAPABILITIES
CFORK ;CREATE A FORK FOR CHECKD
JRST [ EXCH T1,FILJFN ;SAVE ERROR CODE. GET JFN
RLJFN ;RELEASE IT
NOP
MOVE T1,FILJFN ;GET BACK ERROR CODE
RET] ;AND DONE
MOVEM T1,FKHNDL ;SAVE FORK HANDLE
;[3115] MAKE CHANGES AT RUNDII:+16L TAM 8-JUN-84
;[3115] PUSH P,CAPENB ;SAVE ENABLED CAPABILITIES
;[3115] HLLOS CAPENB ;MAKE THIS A WHEEL
MOVE T2,JOBBIT ;SET TO SAME AS OURS
SPRIW ;BY SETTING PRIORITY WORD
ERJMP .+1 ;JUST IN CASE
;[3115] POP P,CAPENB ;RESTORE CAPABILITIES
HRL T1,FKHNDL ;FORK HANDLE TO LH
HRR T1,FILJFN ;JFN TO RH
GET
ERJMP [MOVE T1,FKHNDL ;GET FORK HANDLE
KFORK ;KILL THE FORK
RET] ;AND DONE
MOVE T1,FKHNDL ;GET FORK HANDLE
MOVE 2,EVEC ;2/OFFSET IN ENTRY VECTOR
SFRKV ;START AT MAIN ENTRY
ERJMP [MOVE T1,FKHNDL ;GET HANDLE
KFORK ;KILL FORK
RET]
SKIPN WFLAG ;WANT TO WAIT?
RETSKP ;NO. RETURN NOW
WFORK
KFORK
RETSKP ;ALL DONE
;ROUTINE TO MAKE RESTART ENTRY IN SYSERR FILE
LOGSST: TRVAR <<RDDBFR,.RLBSZ>>
SAVEQ
JE SF%MST,FACTSW,LOGSS3 ;JUMP IF AUTO RESTART
LOGSS1: TMSG <Why reload? > ;MANUAL RESTART, FIND OUT WHY
HRROI T1,RDDBFR
;**;[2876]Change 1 line at LOGSS1: + 3L RWW 3-DEC-82
MOVX T2,RD%BRK+RD%BEL+RD%RAI+RD%CRF+20*5 ;[2876]
MOVEI T3,0
RDTTY ;GET ANSWER
JFCL
SETZ T3, ;FLUSH TERMINATOR (PRESUMABLY NL)
DPB T3,T1
MOVE T1,[-RLALEN,,RLATAB] ;SET TO VERIFY HIS ANSWER
CALL MATRLA ;SEE IF ANSWER MATCHES TABLE
JRST LOGSS2 ;NO, TELL HIM HIS CHOICES
AOBJP T1,LOGSS3 ;YES, SEE IF IT'S UNIQUE
CALL MATRLA ;ANY OTHER MATCHES?
JRST LOGSS3 ;NO, THIS IS A WINNER
LOGSS2: HRROI T1,LOGMSG ;TYPE LEGAL ANSERS
PSOUT
JRST LOGSS1 ;TRY, TRY AGAIN
LOGSS3: MOVX T1,RL%LEN
MOVX T2,RL%SIZ
CALL ALCSEB ;GET SYSERR STORAGE
JRST [BUG(SYSERF)
RET]
MOVEM T1,Q1
MOVE T2,[-NWHYIT,,WHYIT]
CALL SEBCPY ;COPY DATA INTO BLOCK
JFCL
MOVE T2,[-1,,[SEBPTR RL%OPR,SBTSTR,RDDBFR]]
MOVE T3,FACTSW
TXNN T3,SF%MST ;USE OPR ANSWER IF MANUAL START
MOVE T2,[-1,,[SEBPTR RL%HLT,SBTWD,BUGHLT]]
MOVE T1,Q1 ;USE BUGHLT ADDRESS OTHERWISE
CALL SEBCPY
JFCL
MOVE T1,Q1
CALL QUESEB ;QUEUE BLOCK FOR SYSERR FILE
RET
;ROUTINE TO SEE IF RDDBFR MATCHES ENTRY IN TABLE
;CALL T1/AOBJN POINTER TO TABLE
;RETURNS +1 NO MATCH
;RETURNS +2 MATCH
MATRLA: MOVE T2,[POINT 7,RDDBFR,] ;POINTER TO HIS ANSWER
MOVE T3,[POINT 7,(T1),] ;POINTER TO LEGAL ANSWERS
MATRL1: ILDB T4,T2 ;GET NEXT CHAR OF HIS ANSWER
JUMPE T4,MATRL3 ;DONE IF A ZERO CHARACTER
CAIE T4," " ;END OF FIRST WORD?
CAIN T4,.CHLFD ;END OF LINE?
JRST MATRL3 ;YES
ILDB CX,T3 ;NO, GET NEXT CHAR OF THIS ANSWER
CAIN CX,(T4) ;MATCH?
JRST MATRL2 ;YES, KEEP ON GOINT
AOBJN T1,MATRLA ;NO, TRY NEXT TABLE ENTRY
RET ;NO MATCH - NON SKIP RETURN
MATRL2: TLNN T3,760000 ;END OF THIS TABLE ENTRY?
RETSKP ;YES, SKIP RETURN
JRST MATRL1 ;NO, LOOK AT NEXT CHARACTER HE TYPED
MATRL3: CAME T2,[POINT 7,RDDBFR,6] ;ANYTHING BEFORE THE END-OF-LINE?
RETSKP ;YES, TAKE MATCH-RETURN
RET ;NO, NON-MATCH
RLATAB: ASCIZ /OPR/
ASCIZ /PARIT/
ASCIZ /POWER/
ASCIZ /STATI/
ASCIZ /HARDW/
ASCIZ /HALT/
ASCIZ /HUNG/
ASCIZ /PM/
ASCIZ /CM/
ASCIZ /SA/
ASCIZ /NEW/
ASCIZ /SCHED/
ASCIZ /OTHER/
RLALEN==.-RLATAB
LOGMSG: ASCIZ #
LIST OF POSSIBLE WHY RELOAD ANSWERS (CAN BE ABBREVIATED)
OPERATOR SHOULD ANSWER THE EARLIEST ONE
IN TABLE WHICH APPLIES (WHEN MORE THAN ONE DOES)
ANY COMMENT (UP TO 72 CHARACTERS) MAY BE APPENDED TO AN ANSWER
PREVIOUS SYSTEM PROBLEM:
OPR
PARITY
POWER
STATIC
HARDWARE
HALT
HUNG
PM
CM
SA
DIFFERENT MONITOR WANTED:
NEW
SCHED
OPERATOR DOESNT KNOW OR NOT IN TABLE:
OTHER
#
;POINTER TABLE TO BUILD RELOAD ENTRY
WHYIT: SEBPTR 0,SBTEVC,SEC%RL ;EVENT CODE (IMMEDIATE)
SEBPTR RL%SVN,SBTSTR,SVN ;SYSTEM NAME
SEBPTR RL%STD,SBTWD,SYSTAD ;BUILD TAD
SEBPTR RL%VER,SBTWD,[EXP SVNM] ;SYSTEM VERSION NUMBER
SEBPTR RL%SER,SBTWD,APRSER ;APR SERIAL NUMBER
NWHYIT==.-WHYIT
;LOCAL ROUTINE TO READ TAD FROM CTY
; CALL RDDTAD
; RETURN +1 ALWAYS, 2/ TAD
RDDGTD: STKVAR <<RDDBFR,20>>
RDDGT1: HRROI 1,RDDBFR
MOVE 2,[RD%BRK+RD%BEL+RD%RAI+20*5]
MOVEI 3,0
RDTTY ;READ LINE FROM CTY
JRST RDDGT2 ;FAILED, REPROMPT
TXNN 2,RD%BTM ;BREAK CHAR TERMINATED INPUT?
JRST RDDGT2 ;NO, GARBAGE INPUT
HRROI 1,RDDBFR
MOVEI 2,0
IDTIM ;CONVERT STRING TO TAD
JRST RDDGT2 ;INVALID, REPROMPT
RET ;OK, RETURN IT
RDDGT2: TMSG <
? Invalid, please try again in form MMM-DD-YY HHMM: >
JRST RDDGT1 ;TRY AGAIN
;EACH SPECIAL JOB CALLS THIS TO DETACH AND START THE NEXT ONE
DONSJ: CALL LOGONM ;RECORD START OF CURRENT JOB ON LOGGING TERMINAL
MOVE 4,CTRLTT ;SAVE THIS JOB'S CONTROLLING TERMINAL
DTACH ;DETACH THE CURRENT JOB
MOVE 1,JB0TT
HRRM 1,PRIMRY ;USE JOB 0 TTY FOR ANY OUTPUT
MOVE 1,JOBNO ;GET CURRENT JOB NUMBER
CAIL 1,NSPECJ-1 ;MORE SPECIAL JOBS TO DO?
JRST [ MOVX T1,SF%PTY!SF%CTY ;NO. ALLOW CTY AND PTY LOGINS
IORM T1,FACTSW
RET] ; AND DON'T CREATE ANOTHER JOB
MOVE 2,4 ;YES. GET LINE NUMBER FOR CALL
CALLRET SPCSTJ ;START ANOTHER JOB ON SAME TTY
SPCSTJ: NOSKED
PUSH P,T2 ;SAVE LINE NUMBER
CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
SKIPA ;NOT FULLY ACTIVE
JRST [ POP P,2
OKSKED
RET]
JUMPG T2,SPCST1 ;IF TEMPORARILY ACTIVE, WAIT
POP P,2 ;GET LINE NUMBER BACK
SETOM TTACTL(T2) ;INDICATE JOB STARTING
MOVEI 1,JOBSRT ;REQUEST JOB STARTUP FROM SCHED
HRL 1,2
CALL SCDRQ7
OKSKED
RET
;LINE IS TEMPORARILY IN USE. WAIT UNTIL IT'S AVAILABLE
SPCST1: POP P,1 ;RESTORE LINE NUMBER
OKSKED
HRLZS T1 ;T1/ (LINE NUMBER,,ROUTINE)
HRRI T1,TSACT1 ;ROUTINE TO WAIT FOR LINE
PUSH P,T2
MOVSI T2,FHV1 ;LOW BLOCK PRIORITY
HDISMS
POP P,T2
JRST SPCSTJ
;GET SWAPPABLE MONITOR
RESCD
;BOOT DEVICE TABLE--DISPATCH ON CONTENTS OF BOOTFL TO SELECT DEVICE
BOOTD: PHASE 0
JRST GSMDSK ;0 - DSK (VBOOT)
REPEAT 2,<JRST GSMDSK> ;EVERYTHING IS DISK
IRBOOT::!JRST GSMIRB ;INTERNAL REBOOT
DEPHASE
NBOOTD==.-BOOTD
GETSWM::
SETZM SWPMWF ; INITIALIZE SWAPPABLE MON WRITERS FLAG
SETOM SWPMLF ; INIT COUNT OF LOCKERS OF SWP MON
SKIPN EDDTF ;KEEP EDDT?
CALL ULKINI ;NO, UNLOCK IT
NOSKED
MOVE 1,BOOTFL ;GET DEVICE SELECTOR
CAIL 1,NBOOTD ;LEGAL?
BUG(ILBOOT)
JRST BOOTD(1) ;GO TO SELECTED BOOTSTRAP
;COMMON EXIT POINT FOR ALL DEVICES
LOKSM3: SETZ T1,
MOVEI T2,HOMPGA
CALL SETMPG ;CLEAR BOOT PAGE
MOVE T1,DBUGSW ;WRITE PROTECT?
CAIN T1,1 ;?
SKIPE WEFLAG
CAIN T1,0
CALL SWPMWP ;YES - IF NOT DEBUGGING
OKSKED
SKIPE SMLKF ;KEEP SWPMON LOCKED?
CALL SWPMLK ;YES, RE-LOCK IT
RET
RS(SWPMBP,1) ;STORAGE FOR SWPMON BOUND PAIR
RS(BOOTST,^D20) ;STORAGE FOR VBOOT COMMAND
;INTERNAL REBOOT - ASSUMES SWAP MON MAP FROM PREVIOUS RUN IS
;SAVED IN LOW CORE
GSMIRB: CALL RESSMM ;RESTORE MON MAP
JRST LOKSM3 ;DONE
;THE DECTAPE BOOTSTRAP
;HERE TO BOOTSTRAP THE SWAPABLE MONITOR FROM DISK
GSMDSK: HRRZ T1,BUTPGS ;GET END PAGE OF VBOOT AREA
HLRZ T2,BUTPGS ;GET START PAGE OF VBOOT AREA
SUB T1,T2 ;COMPUTE # OF PAGES IN VBOOT AREA
SUBI T1,1000 ;TWO LESS SINCE WE DON'T LOCK BOOT'S EPT/MMAP
LSH T1,-PGSFT ;GET PAGES
MOVE T2,TOTRC ;GET TOTAL FREE
SUB T2,T1 ;COMPUTE FREE PAGES AFTER VBOOT
SUB T2,SUMNR ;DISCOUNT FORK OVERHEAD PAGES
SKIPG P1,T2 ;SAVE IN P1
BUG(BOOTCR)
LSH P1,PGSFT ;CONVERT TO WORDS
; MAP BOOTSTRAP PAGES
HRRZ P2,BUTPHY ;GET CORE ADDRESS OF FIRST PAGE
LSH P2,-^D9 ;CONVERT TO CORE PAGE #
HLL P2,BUTPHY ;GET - # OF PAGES TO MAP
MOVE P3,BUTVIR ;GET FIRST VIRTUAL ADR TO MAP
GSMD1: HRRZ T1,P2 ;GET PAGE # TO MAP
MOVE T2,P3 ;GET VIRTUAL ADDRESS
CALL MAPPHA ;GO MAP A PHYSICAL PAGE
BUG(BOOTMP)
ADDI P3,PGSIZ ;NEXT VIRTUAL ADDRESS
AOBJN P2,GSMD1 ;MAP REMAINING PAGES
HRL T1,MMSPTN ;GET SPTN OF MONITOR MAP
HRRI T1,KIEPT/PGSIZ ;FORM I.D. OF EPT
HLRZ T2,BUTEPT ;GET VIRTUAL ADDRESS OF BOOT'S EPT
TXO T2,PTRW ;ACCESS BITS
CALL SETMPG ;GET INDIRECT POINTER TO EPT
MOVEI T1,MMAP ;BUILD POINTER FOR VBOOT TO PAGE TABLE
LSH T1,-PGSFT ; ...
HRL T1,MMSPTN ; ...
HRRZ T2,BUTEPT ;GET ADDRESS OF VBOOT PAGE TABLE PAGE
TXO T2,PTRW ;TURN ON ACCESS BITS
CALL SETMPG ;SET MAP
HLLZ T1,BUTPGS ;GET STARTING ADDRESS FOR VBOOT
HLR T1,BUTEPT ;GET ADDRESS OF VBOOT MMAP PAGE
SUBI T1,1 ;WANT LAST PAGE BELOW MMAP LOCKED
CALL CGPLK ;CREATE A GROUP OF PAGES AND LOCK
GSMLER: BUG(BOOTLK)
HRRZ T1,BUTEPT ;GET ADDRESS OF VBOOT EPT PAGE
HRLZI T1,PGSIZ(T1) ;GET FIRST ADDRESS TO LOCK ABOVE EPT
HRR T1,BUTPGS ;GET ADDRESS OF LAST PAGE TO LOCK
CALL CGPLK ;CREATE AND LOCK
JRST GSMLER
MOVEM T1,BOOTST ;SAVE PHYSICAL ADDR OF VBEND
;..
;HERE TO LOAD THE SWAPABALE MONITOR. IT IS READ IN SECTIONS
;AS LARGE AS THE AMOUNT OF FREE CORE.
MOVEI P2,NRCOD-1000 ;INITIALIZE SWPMON LOAD LOOP
MOVE T1,NRPLQ ;GET PAGES ON REPLACEABLE QUEUE
LSH T1,PGSFT ;SHIFT TO CONVERT FROM PAGES
CAMGE T1,P1 ;ASKING FOR MORE PAGES THAN WE CAN GIVE?
MOVE P1,T1 ;YES SO ADJUST NUMBER OF PAGES
GSMD2: ;HERE TO BOOT A PIECE OF SWAPPABLE MONITOR
MOVEI T1,1000(P2) ;FIRST PAGE IN CURRENT GROUP
ADD T1,P1 ;COMPUTE LAST LOADABLE PAGE
SUBI T1,1000 ;OF CURRENT GROUP
LSH T1,-PGSFT ;AS A PAGE #
CAMLE T1,SWCEND ;UNDER END OF SWPMON?
MOVE T1,SWCEND ;NO USE END INSTEAD
LSH T1,PGSFT ;CONVERT BACK TO ADDR
HRLI T1,1000(P2) ;NEW FROM PAGE
MOVE P2,T1 ;SAVE BOUND PAIR
CALL CGPLK ;CREATE AND LOCK
JRST GSMLER ; LOCK FAILURE
MOVE P3,[POINT 7,BOOTST] ;BUILD VBOOT COMMAND STRING
MOVE T1,[POINT 7,BUTCMD] ;POINTER TO FILE SPEC
CALL BSCPY ;COPY TO OUTPUT STRING
MOVE T1,[POINT 7,[ASCIZ '/L(']] ;LOAD ONLY
CALL BSCPY
HLRZ T1,P2 ;LOWER BOUND
LSH T1,-PGSFT ;AS A PAGE NUMBER
CALL BSOCT ;CONVERT TO STRING
MOVEI T1,","
IDPB T1,P3
HRRZ T1,P2 ;UPPER BOUND
LSH T1,-PGSFT ;AS A PAGE NUMBER
CALL BSOCT ; ...
MOVE T1,[POINT 7,[ASCIZ /)
/]]
CALL BSCPY ;END OF COMMAND
;...
;WE ARE NOW READY TO LOAD A SECTION OF THE SWAPABLE MONITOR.
;CALL VBOOT TO DO THE IO.
PUSH P,P1 ;SAVE FREE CORE
PUSH P,P2 ;SAVE BOUND PAIR
HLRZ T1,BUTEPT ;GET ADDRESS OF VBOOT EPT PAGE
SETMM (T1) ;INSURE EPT UPDATED
CALL PHYIOW ;WAIT FOR ALL IO TO FINISH
PIOFF ;DISABLE INTERRUPT SYSTEM
MOVEM P,FPC ;SAVE STACK POINTER
MOVE T1,[POINT 7,BOOTST] ;GET POINTER TO COMMAND STRING
HRRZ T2,BUTPGS ;GET ADDRESS OF LAST PAGE IN VBOOT AREA
VBCALL::JSP 16,777(T2) ;GO LOAD SOME MONITOR
; CALL BOOT AT LAST INSTRUCTION ON
; LAST PAGE WHICH IS A JRST TO VBOOT
BUG(BOOTER)
MOVE P,FPC ;RECOVER STACK
XCT SETPPI ;RESTORE APR PI ASSMT
PION
POP P,P2 ;RESTORE BOUND PAIR
POP P,P1 ;RESTORE FREE CORE
MOVE T1,P2 ;UNLOCK SWPMON PAGES
CALL GPULK ;...
HRRZ T1,P2 ;ARE WE DONE?
LSH T1,-PGSFT ;...
CAME T1,SWCEND ;...
JRST GSMD2 ;NO - ANOTHER CYCLE
CALL GSMDX ;RESET VBOOT AREA
JRST LOKSM3 ;YES - ADJUST SWPMON
;SUBROUTINE TO RELEASE VBOOT AREA
GSMDX: SE1CAL ;Section 1 because SETMPG can lead to GDSTX
HLLZ T1,BUTPGS ;GET START ADDRESS OF VBOOT AREA
HLRZ T2,BUTEPT ;GET ADDRESS OF VBOOT EPT PAGE
HRRI T1,-PGSIZ(T2) ;GET LAST ADDRESS TO UNLOCK
CALL GPULK ;...
HRRZ T2,BUTEPT ;GET ADDRESS OF VBOOT EPT PAGE
HRLZI T1,PGSIZ(T2) ;GET FIRST ADDRESS TO UNLOCK
HRR T1,BUTPGS ;GET LAST ADDRESS TO UNLOCK
CALL GPULK ;...
HLRZ P1,BUTPGS ;GET START ADDRESS OF VBOOT PAGES
HRRZ P2,BUTPGS ;GET ENDING ADDRESS OF VBOOT PAGES
GSMD3: HRRZ T2,P1 ;GET ADDRESS
SETZ T1, ;DESTROY PAGE
CALL SETMPG ; ...
ADDI P1,1000 ;NEXT PAGE
CAMG P1,P2 ;DONE ?
JRST GSMD3 ;NO - LOOP
RET ;DONE
;SUBROUTINES FOR BOOTSTRAP MANIPULATION
;SUBROUTINE TO COPY FROM BP IN T1 TO BP IN P3
BSCPY: ILDB T2,T1 ;GET A CHAR
JUMPE T2,R ;DONE?
IDPB T2,P3 ;NO - COPY CHAR
JRST BSCPY ;LOOP
;SUBROUTINE TO OUTPUT T1 TO BP IN P3 AS A DECIMAL NUMBER
BSDEC: MOVEI T3,^D10 ;DECIMAL
CALL BSRAD ;CONVERT
RET
;SUBROUTINE TO OUTPUT T1 TO BP IN P3 AS AN OCTAL NUMBER
BSOCT: MOVEI T3,^D8 ;OCTAL
CALL BSRAD ;CONVERT
RET
;COMMON/CONVENTIONAL PDP10 UNSIGNED RADIX PRINT
;ACCEPTS:
; T1/ NUMBER TO BE CONVERTED
; T3/ RADIX
; CALL BSRAD
;RETURNS+1: ALWAYS
BSRAD: IDIV T1,T3 ;GET Q & R
MOVEI T2,"0"(T2) ;CONVERT TO ASCII
PUSH P,T2 ;SAVE THE CHARACTER ON THE STACK
SKIPE T1 ;DONE?
CALL BSRAD ;NO - RECURSE
POP P,T2 ;RETRIEVE CHARACTER STORED ON STACK
IDPB T2,P3 ;OUTPT
RET
;'MINI-EXEC' - SIMPLE COMMAND INTERPRETER FOR SPECIAL FUNCTIONS
SWAPCD
EXEC2: MOVE T1,JOBBIT
IFXN. T1,LOGIOB ;LOGIN OR OUT?
BUG(EXILGO)
WAIT% ;YES, SOME KIND OF DISASTER. GO AWAY QUIETLY.
ENDIF.
MOVEI 1,100 ;ESTABLISH CORRECT TTY MODES
MOVE 2,NORMTF
SFMOD
MOVE 2,TTICB1
MOVE 3,TTICB2
SFCOC
CALL DTIALL ;DISABLE ALL TERMINAL INTERRUPTS
MOVE 1,[XWD 20,^D34] ;T1/ CTRL/P ON CHANNEL 34
ATI ;ASSIGN CONTROL-P FOR INTERRUPTS
MOVE 1,[ITFFL,,EXECI] ;SETUP TO GET INTERRUPTS IN MON
MOVEM 1,MONBK
MOVEI 1,.FHSLF ;T1/ THIS FORK
MOVEI 2,MICHN ;T2/ CHANNELS TO ACTIVATE (34 AND 35)
MOVEM 2,MONCHN ;SAVE THE CHANNELS
AIC ;ACTIVATE THEM
MOVE 2,JOBNO
HRRZ 1,JOBDIR(2)
IFE. T1
SETZM CAPMSK ;IF NOT LOGGED, FLUSH ALL CAPS
SETZM CAPENB
MOVE 3,CTRLTT
CAME 3,CTYLNO ;ALLOW MINI-EXEC ONLY ON CTY
ANSKP.
HRLOI 3,777000 ;GIVE ALL CAPS
MOVEM 3,CAPMSK
MOVEM 3,CAPENB
MOVEI 3,OPERDN ;YES, GET DIRECTORY NUMBER OF <OPERATOR>
MOVEM 3,JOBDIR(2) ;INDICATE LOGGED IN AS <OPERATOR>
STOR 3,JSDIR ;SAVE AS CONNECTED DIRECTORY
SETZRO JSCDF ;NO STRING IN JSB
MOVE 3,STRTAB+PSNUM ;GET SDB ADDRESS OF STRUCTURE 0 (PUBLIC)
LOAD 3,STRUC,(3) ;GET ITS UNIQUE STRUCTURE CODE
STOR 3,JSUC ;SAVE AS CONNECTED STRUCTURE CODE
MOVE 3,[[3
ASCIZ "OPERATOR"],,USRNAM]
BLT 3,USRNAM+2 ;SET DEFAULT USER NAME TO OPERATOR
ENDIF.
JN JBMX,,EXECT0 ;IF BEEN IN MX BEFORE, DONT CHECK CAPS
MOVE 1,CAPENB ;LOOK AT CAPS, ALLOW MINI-EXEC
TRNE 1,SC%WHL ;ONLY IFWHEEL
IFSKP.
SKIPE FORKN ;OTHERWISE,
HALTF ;HALTF IF BELOW EXEC
SETONE JSFLO ;REMEMBER THE FORCED LOGOUT
JRST LOGO ;LOGOUT IF TOP FORK
ENDIF.
SETONE JBMX ;REMEMBER THAT JOB WAS IN MINI-EXEC
; ..
;MINI-EXEC...
EXECT0: HRROI 1,[ASCIZ /MX>/]
PSOUT ;DO PROMPT
EXECT1: PBIN ;GET USER INPUT
CAIN T1,.CHCRT ;FLUSH CR
JRST EXECT1
CAIL 1,"A"+40 ;LC CHAR?
CAILE 1,"Z"+40
SKIPA ;NO
SUBI 1,40 ;YES, CONVERT
CAIN T1,.CHLFD ;IGNORE BLANK LINE
JRST EXECT0
MOVSI 4,-NXCMD ;SCAN COMMAND TABLE
EXECT2: HLRZ 2,XCMD(4) ;GET KEY LETTER FOR THIS COMMAND
CAMN 1,2 ;SAME AS JUST TYPED?
JRST [ HRRZ 2,XCMD(4) ;YES, GET DISPATCH ADDRESS
JRST 0(2)] ;GO TO IT
AOBJN 4,EXECT2 ;TRY ALL COMMANDS
JRST EXERR ;NOT FOUND, INDICATE ERROR
;MINI-EXEC COMMANDS
DEFINE CM (NAM,LOC)<
XWD "NAM",LOC>
XCMD: CM B,EBLT ;BLT SWP MON
CM D,EDMP ;DUMP ON FILE
CM E,GEX ;EXEC
CM G,EGET ;GET FILE
CM J,EJMP ;JUMP TO ADDRESS
CM R,EREST ;RESET
CM S,EST ;START
CM <^>,MRETN ;DO MRETN
CM </>,TODDT ;GO TO MDDT
NXCMD==.-XCMD
;'/' - ENTER MDDT
TODDT: SE1ENT
GTOKM (.GOMDD,) ;ASK FOR PRIVS
JRST MDDTX ;GO TO DDT
;'BLT SWP MON' - BLT SWAPPABLE CODE TO USER SPACE. SHOULD DO RESET FIRST,
;THEN DUMP ON DTA--
EBLT: TMSG <LT SWP MON>
CALL OKGO
MOVE 2,SWCEND ;LST PAGE
LSH 2,^D9
MOVE T1,[NRCOD,,NRCOD]
XBLTMU [BLT 1,777(2)]
JRST EXEC2
;'RESET'
EREST: TMSG <ESET>
CALL OKGO
CALL DRESET ;DO THE RESET
JRST EXEC2
;DRESET IS COMMON ROUTINE USED BY SEVERAL COMMANDS TO DO A RESET
DRESET: MOVEI 1,-4
KFORK ;KILL ALL FORKS
MOVNI 1,1
MOVSI 2,400000
MOVE 3,[1B0+1000] ;CLEAR ALL PAGES FROM USER MAP
PMAP
MOVNI 1,1 ;CLOSE ALL FILES
CLOSF
JFCL
RET
;OKGO - ROUTINE TO LOOK FOR CONFIRMATION AFTER MINI-EXEC HAS
;TYPED THE COMPLETION OF THE COMMAND.
; CALL OKGO
;RETURNS +1: CONFIRMATION FOUND
;IF NO CONFIRMATION WAS FOUND, GOES TO ERROR ROUTINE
OKGO: PBIN
CAIN T1,.CHCRT ;FLUSH CR
JRST OKGO
CAIN T1,.CHLFD ;CRLF MEANS GO
RET
NODD1: POP P,1 ;ANYTHING ELSE MEANS ABORT
JRST EXERR
;'EXEC'
GEX: TMSG <XEC>
CALL OKGO ;CONFIRM
CALL DRESET ;CLEAR PREVIOUS PROGRAM TO GUARANTEE CINITF IN EXEC IS CLEAR
;HERE TO GET A NEW COPY OF THE EXEC. REACHED FROM MINI-EXEC 'EXEC'
;COMMAND OR WHEN A NEW JOB IS BEING CREATED. IF FILE EXISTS,
;GOES TO START IT. IF NOT, PRINTS MESSAGE AND GOES TO MINI-EXEC
STEX: MOVSI 1,(GJ%OLD!GJ%PHY!GJ%SHT) ;OLD FILE+SHORT FORM
HRROI 2,[ASCIZ /SYSTEM:EXEC.EXE/]
GTJFN
STEXF: JRST [ SKIPE CRJFLG ;IS THIS A CRJOB FAILURE?
JRST CRJMEX ;YES. GO GIVE FAIL CODE
HRROI T1,[ASCIZ /NO EXEC/]
PSOUT
JRST EXCRR]
HRLI 1,.FHSLF
GET
ERJMP STEXF ;CATCH FAILURE OF GET
SKIPN CRJFLG ;CREATED JOB?
JRST GEX1
;**;[6733] MAKE CHANGES AT STEXF:+10L TAM 6/27/85
RET ;[6733] YES, RETURN TO FINISH UP
;[6733] HRLI T2,1 ;INDICATE JOB HAS ALREADY SET CRJANS
;[6733] HLLM T2,CRJFLG ; BY MAKING FLAG POSITIVE
;**;[3115] ADD 1 LINE AT CRJMEX:-2L TAM 31-MAY-84
;[6733] SETOM CRJANS ;[3115] SAY SUCCESS
;[6733] JRST GEX1
CRJMEX: MOVEI T1,CRJBX2 ;PREVENT CRJOB GETTING INTO MINIEXEC
SKIPGE CRJFLG ;JOB STILL BEING CREATED
MOVEM T1,CRJANS ;YES. GIVE FAIL CODE TO CREATOR,
;**;[3115] ADD 2 LINES AT CRJMEX:+3L TAM 31-MAY-84
HRLI T2,1 ;[3115] INDICATE JOB HAS ALREADY SET CRJANS
HLLM T2,CRJFLG ;[3115] BY MAKING FLAG POSITIVE
JRST LOGO ;AND FLUSH OUT THIS JOB.
;'JUMP TO ADDRESS' - JUMP TO USER ADDRESS
EJMP: TMSG <UMP TO >
MOVEI 1,100
MOVEI 3,^D8 ;GET OCTAL ADDRESS
NIN
JRST EXERR
HRRZM 2,-1(P) ;SAVE ADDRESS
BKJFN ;BACKUP TO READ TERMINATOR
JFCL
CALL OKGO
JRST MRETN ;RETURN TO USER ADDRESS ON STACK
;'GET FILE'
EGET: TMSG <ET FILE >
MOVSI 1,(1B2+1B4+1B16+1B17) ;OLD FILE,CONFIRM,IFOF,SHORT
MOVE 2,[XWD 100,101]
GTJFN
JRST EXERR
HRLI 1,400000 ;THIS FORK
GET
JRST EXEC2
;'START' - STARTS PROGRAM GOTTEN VIA 'GET'
EST: TMSG <TART>
CALL OKGO
GEX1: MOVE 1,EVADDR
JUMPN 1,.+2
UMOVE 1,120 ;USE JOBSA
MOVEM 1,-1(P)
JRST MRETN
;'DUMP ON FILE'
EDMP: TMSG <UMP ON FILE >
MOVSI 1,(1B0+1B3+1B4+3B17) ;NEW V,PNT O/N,CONFRM,IFOF,SHRT
MOVE 2,[XWD 100,101]
GTJFN
JRST EXERR
HRLI 1,400000 ;THIS FORK
MOVE 2,[XWD -1000,520000] ;SAVE ALL ADDRESS SPACE
SETZ 3,
SSAVE
JRST EXEC2
;ERROR CONDITION - PRINT A QUESTION MARK AND GO BACK TO START OF
;MINI-EXEC
EXERR: TMSG < ?>
MOVEI 1,100
CFIBF ;CLEAR INPUT BUFFER
;PRINT CARRIAGE RETURN/LINE FEED
EXCRR: SKIPE CRJFLG ;IS THIS A CRJOB?
JRST CRJMEX ;YES. GET OUT OF MINIEXEC.
TMSG <
>
JRST EXEC2
EXCRRW: TMSG <
>
JRST EXEC2
;PSI TRAPPED TO HERE
EXECI:: XCT FRKNOP ;NOP UNLESS MDDT BPT SET
EXCH 1,ITFFL ;SAVE 1, GET TRAP FL
TLNN 1,(UMODF) ;USER?
JRST EXECI1 ;NO
HLLZM 1,FFL ;SET FLAGS
MOVE 1,ITFPC ;SET PC
MOVEM 1,FPC ;YES, ENTER MONITOR AT THAT LOC
MOVE 1,ITFFL ;RESTORE AC1
EXECI2: MCENTR
SETOM PRIMRY
SKIPE CRJFLG ;IS THIS A CRJOB?
JRST CRJMEX ;YES. GET OUT OF MINIEXEC.
MOVEI 1,100
CFIBF ;CLEAR INPUT BUFFER
;**;[2888]replace one line with 2 at EXECI2: +6L RWW 17-DEC-82
;**;[2886]Change one line at EXECI2 + 6L RWW 13-DEC-82
;**;[2874]Add one line at EXECI2: + 6L RWW 23-NOV-82
ERJMP [CALL EXECI4 ;[2874][2886][2888]error during LOG IN/OUT
JRST .+1] ;[2888]Kludge! Since ERCALs don't word
CALL CLRINT ;CLEAR THE SOFTWARE INTERRUPT SYSTEM
TRNN 2,2 ;CHANNEL 34?
JRST EXECI3
MOVEI 1,-4
FFORK ;FREEZE FORKS
MOVEI 1,101
CFOBF ;CLEAR OUTPUT BUFFER
;**;[2888]replace one line with 2 at EXECI2: +6L RWW 17-DEC-82
;**;[2886]Change one line at EXECI2 + 14L RWW 13-DEC-82
;**;[2874]Add one line at EXECI2: + 14L RWW 23-NOV-82
ERJMP [CALL EXECI4 ;[2874][2886][2888]error during LOG IN/OUT
JRST .+1] ;[2888]Kludge! Since ERCALs don't word
TMSG <
ABORT
>
JRST EXEC2
EXECI1: MOVE P,UPP ;RESTORE TOP OF PDL
MOVE 2,1(P) ;GET USER PC
MOVEM 2,FPC ;STORE PC
HRLI 1,(UMODF)
MOVEM 1,FFL
JRST EXECI2
EXECI3: TMSG <
INTERRUPT AT >
MOVEI 1,101
HRRZ 2,UPP
HRRZ 2,1(2) ;GET TOP PC
MOVEI 3,10 ;RADIX
NOUT ;PRINT ADDRESS
JFCL
JRST EXCRRW ;TO MINI-EXEC IF SC%WHL
;**;[2886]Add 4 lines at EXECI4 + 0L RWW 13-Dec-82
;**;[2874]Add new routine EXECI4: at EXECI3: + 11L RWW 23-NOV-82
EXECI4: SAVEAC <T1> ;[2886]save T1
MOVE T1,JOBBIT ;[2886]get job bits
TXNN T1,LOGIOB ;[2886]in LOGIN or LOGOUT?
RET ;[2886]no, return +1
MOVE T1,JOBNO ;[2874]get current job number
HLRZ T1,JOBPT(T1) ;[2874]get controlling TTY:
MOVE T2,LSTERR ;[2874]get last error this process
BUG(LGFAIL,<<T1,JOBPT>,<T2,LSTERR>>) ;[2874]bug!
DTACH ;[2874]attempt to detach
;**;[2886]Add one line at EXECI4: +5L RWW 13-DEC-82
ERJMP .+1 ;[2886]Ignore errors
SETOM T1 ;[2874]me
LGOUT ;[2874]try to do a logout now
;**;[2886]Add one line at EXECI4: +7L RWW 13-DEC-82
ERJMP .+1 ;[2886]Ignore errors
WAIT ;[2874]error, wait forever
;**;[2886]Add and change one line at EXECI4: +9L RWW 13-DEC-82
ERJMP .+1 ;[2886]Ignore errors
JRST .-2 ;[2874][2886]make sure we can't escape
;JSYS TO ENTER MDDT
.MDDT:: MCENT
MOVEI 1,SC%WHL+SC%OPR
TDNN 1,CAPENB
JRST WHEELX ;NO PRIVS
JRST TODDT
RESCD
;HERE WHEN USER TYPES "EDDT$G" IN MDDT. DON'T GO TO EDDT UNLESS IT
;IS LOADED AND LOCKED DOWN. USERS WHO WANT TO ANYWAY CAN TYPE "DDTX$G".
EDDT==:<MSEC1,,.> ;START IN SECTION 1 ON EDDT$G FROM MDDT
SKIPE DDTPRS ;IS EDDT PRESENT AND LOCKED?
JRST DDTX ;YES, GO TO IT
TMSG <
? EDDT is not locked down - call LCKINI from MDDT first
>
JRST MDDTX ;RETURN TO MDDT
;BUGHLT IN JOB CONTEXT TRAPS TO HERE
EXBUGH::MOVE 1,UPDL ;RESET STACK, ETC.
MOVEM 1,FPC ;SET PC
MOVSI 1,(UMODF)
MOVEM 1,FFL
MCENTR
SETOM TRAPC
SETZM NSKED
SETZM INTDF
SKIPN JOBNO ;JOB 0?
JRST CHKRI ;YES, INTERRUPT
HRRZ 1,PRIMRY
HRROI 2,[ASCIZ /
BUGHLT at /]
SETZ 3,
SOUT
HRRZ 2,BUGHLT
MOVEI 3,^D8
NOUT
JFCL
TMSG <
>
JRST ITRAP
SWAPCD
;HALT SYSTEM - REQUIRES SC%MNT (OR SC%WHL ETC.) CAPABILITY
;ACCEPTS TIME OF SYSTEM SHUTDOWN AND INITIATES SHUTDOWN PROCESS,
;INCLUDING NOTIFYING USERS, ETC. ALSO ACCEPTS TIME WHEN SYSTEM
;WILL BE BACK UP WHICH IS AVAILABLE FOR USER INFORMATION ONLY.
; 1/ SHUTDOWN TIME (GTAD FORMAT)
; 2/ EXPECTED UP TIME (GTAD FORMAT)
; HSYS
; RETURNS +1: ERROR
; RETURNS +2: SUCCESS
.HSYS:: MCENT
MOVE 2,CAPENB ;CHECK USER CAPABILITIES
TXNN 2,SC%WHL+SC%OPR+SC%MNT ;USER ALLOWED TO DO HALT?
RETERR(CAPX2) ;NO, RETURN BAD
JUMPG 1,HSYS1 ;JUMP UNLESS ABORTING SHUTDOWN
MOVE T1,HSYST1 ;GET OLD TIME
JUMPE T1,HSYS0 ;IF NONE, DONT TYPE MESSAGE
SETZM HSYST1 ;CLEAR OLD TIME
CALL TADDIF ;GET MILLISECONDS TO SHUTDOWN
HRROI T2,[ASCIZ/
[Shutdown canceled]
/]
MOVX T3,SF%MS1
TDNE T3,FACTSW ;WANT LEVEL 1 MESSAGES?
SKIPGE HSYST3 ;WAS A MESSAGE EVER PRINTED
SKIPA
CALL ALLMSG ;YES, INFORM USERS OF CANCELLATION
HSYS0: SMRETN ;SUCCESSFUL RETURN
HSYS1: PUSH P,1 ;HOLD THE DESIRED SHUTDOWN
CALL TADDIF ;COMPUTE MILLISECONDS TO SHUTDOWN
TLNE 1,770000 ;OVER A WEEK AHEAD, OR NEGATIVE?
RETERR(TIMEX2) ;YES, GIVE BAD TIME FAILURE
POP P,2 ;RECOVER SHUTDOWN TIME
MOVEM 2,HSYST1 ;STORE FOR EXEC TO SEE
SETOM HSYST3 ;FLAG FOR FIRST MESSAGE
UMOVE 2,2 ;GET EXPECTED UP TIME
CAMG 2,HSYST1 ;CHECK RANGE
SETZ 2, ;JUNK, ASSUME UNKNOWN
MOVEM 2,HSYST4 ;SAVE FOR EXEC TO TELL USERS
AOS JB0FLG ;POKE JOB 0 TO DO MSG
SMRETN
;COMPUTE TIME UNTIL SHUTDOWN IN MILLISECONDS
; A/ TAD OF SHUTDOWN
; CALL TADDIF
; RETURN +1, A/ MILLISECONDS TO SHUTDOWN
TADDIF: PUSH P,1
CALL LGTAD ;GET CURRENT TIME AND DATE
POP P,2
SUBM 2,1 ;GET POSITIVE DIFFERENCE OF TIMES
CAML T1,[^D8,,0] ;WITHIN 8 DAYS?
JRST [ MOVSI T1,377777 ;NO, RETURN VERY LARGE NUMBER
RET]
MUL T1,[^D<24*3600*1000>] ;MILLISECONDS/DAY
DIV T1,[1B17] ;SHIFT BINARY POINT
RET
;HSYST1 AND HSYST4 ARE A GETAB TABLE
NHSYST==2 ;NUMBER OF VALUES IN GETAB TABLE
NR HSYST1,1 ;SYSTEM SHUTDOWN TIME OR 0
NR HSYST4,1 ;EXPECTED UP TIME
NR HSYST2,1 ;INTERVAL (IN MS) TO NEXT MSG TIME
NR HSYST3,1 ;TIME OF NXT MSG IN MS BEFORE SHUTDOWN
;POINTS (IN MINUTES BEFORE SHUTDOWN) AT WHICH TO DO NOTIFICATION
CTIMS: ^D<BYTE (9) 60,30,15,10>
^D<BYTE (9) 5,1,0>
;ROUTINE TO TYPE SYSTEM SHUTDOWN MESSAGE IF NECESSARY.
;CALLED ONLY BY JOB 0 CHKR.
CHKHSY: SKIPE A,HSYST1 ;SHUTDOWN ABORTED?
CAMN A,[-1] ;OR IS SYSTEM SHUTDOWN?
RET ;YES
CALL TADDIF ;COMPUTE TIME UNTIL SHUTDOWN
MOVE 3,HSYST3 ;DUE TIME FOR MESSAGE
CAMN 3,[-1] ;FIRST TIME HERE?
JRST CHKHS3 ;YES - GIVE MESSAGE ANYWAY
CAMLE 1,HSYST3 ;NO - MESSAGE DUE NOW?
JRST [ SUB 1,HSYST3 ;NO, COMPUTE INTERVAL TO NEXT MSG
MOVEM 1,HSYST2 ;LEAVE IT FOR CHKR
RET] ;RETURN QUIETLY
CHKHS3: ADDI 1,^D30000 ;ROUND TO NEAREST MINUTE
IDIVI 1,^D60000 ;CONVERT TO INTEGER MINUTES
JUMPLE 1,CHKHS4 ;IF NO TIME LEFT, GO KILL SYSTEM
CALL THSYS ;SEND MSG TO ALL TTYS
CAILE 1,^D60 ;LESS THAN AN HOUR?
JRST [ MOVEI 2,^D60 ;NO - SET NEXT MESSAGE FOR 1 HOUR NOW
CAILE 1,^D120 ;BETWEEN 1 AND 2 HOURS
MOVEI 2,^D120 ;MAKE FIRST NOTICE BE AT 1 HOUR
JRST CHKHS5]
MOVE 3,[POINT 9,CTIMS] ;SETUP TO FIND NEXT NOTIFY TIME
ILDB 2,3 ;GET A TIME FROM LIST
CAMG 1,2 ;SHORTER THAN ACTUAL TIME REMAINING?
JRST .-2 ;NO, KEEP LOOKING
CHKHS5: IMULI 2,^D60000 ;CONVERT MINUTES TO MILLISECONDS
MOVEM 2,HSYST3 ;SET AS NEXT MESSAGE TIME
JRST CHKHSY ;FINAL CHECK AND RETURN
;SHUTDOWN TIME HAS ARRIVED, COMMENCE SHUTDOWN.
CHKHS4: MOVX T1,SF%RMT!SF%LCL!SF%PTY
ANDCAM T1,FACTSW ;ONLY ALLOW CTY TO LOGIN
MOVX T1,SF%CTY ;MAKE SURE CTY CAN LOG IN
IORM T1,FACTSW ;EVEN IF HE COULD NOT DO IT BEFORE
CALL DWNMSG ;SEND LAST MESSAGE
SETOM HSYST1 ;CLEAR FLAGS IN CASE RESTARTED
MOVSI T1,(1B1) ;CREATE FORK WITH SAME CAPS
CFORK
BUG(HSYFRK)
MOVEI T2,HSYS4 ;SET IT TO START NEXT SHUTDOWN PHASE
MSFRK ;START FORK IN MONITOR MODE
RET
;FORK STARTED AT SHUTDOWN TIME
;COMMENCE SHUTDOWN. PREVENT NEW JOBS, LOGOUT EXISTING JOBS, HALT.
HSYS4: MOVSI 1,(UMODF)
MOVEM 1,FFL ;ESTABLISH USUAL JSYS CONTEXT
SETZM FPC ;SET PC
MCENTR
MOVX T1,SF%RMT!SF%LCL!SF%PTY
ANDCAM T1,FACTSW ;ONLY ALLOW CTY TO LOGIN
MOVE 6,[XWD -NJOBS+1,1] ;START WITH JOB 1
SKIPGE JOBRT(6) ;LOOK FOR EXISTING JOB
HSYS41: AOBJN 6,.-1
JUMPGE 6,HSYS7 ;JUMP IF DONE
HLRZ 1,JOBPT(6) ;CHECK CTRLTT FOR JOB
CAMN 1,CTYLNO ;CTY?
JRST HSYS41 ;YES, DON'T FLUSH
MOVEI 1,0(6) ;GET JOB NUMBER
LGOUT ;LOG IT OUT
JFCL
JRST HSYS41
HSYS7: MOVEI 5,^D120000 ;MAX TIME TO WAIT FOR JOBS TO FINISH
ADD 5,TODCLK ;LOGGING OUT
HSYS8: CAMG 5,TODCLK ;WAITED MAX TIME?
JRST HSYS9 ;YES, PROCEED WITH SHUTDOWN
MOVE T2,HSYST4 ;GET TIME BACK UP
MOVEI T1,^D12 ;SHOULD BE CODE FOR REASON FOR HALT
;BUT FOR NOW, JUST SAY "SCHEDULED DOWN"
CALL IMPHLT ;TELL THE NETWORK WE ARE GOING AWAY
MOVE 6,[XWD -NJOBS+1,1] ;START WITH JOB 1
SKIPGE JOBRT(6) ;SEE IF ANY JOBS STILL EXIST
HSYS81: AOBJN 6,.-1
JUMPGE 6,HSYS9 ;NONE FOUND, PROCEED
HLRZ 1,JOBPT(6) ;CHECK FOR CTY JOB
CAMN 1,CTYLNO
JRST HSYS81 ;YES, IGNORE
MOVEI 1,^D1000 ;NO, WAIT 1 SEC., THEN CHECK AGAIN
DISMS
JRST HSYS8
HSYS9: CALL PHYLOG ;LOG DISK, TAPE STATISTICS
SETZM DDTIME ;POKE DDMP
AOS JB0FLG
MOVEI 5,^D10 ;WAIT 10 SEC MAX FOR JOB 0
HSYS91: MOVEI 1,^D1000 ;WAIT 1 SEC
DISMS
SKIPN DDTIME ;DDMP FINISHED?
SOJG 5,HSYS91 ;NO, WAIT MORE
JUMPLE 5,HSYS9 ;IF TIMED OUT, TRY AGAIN
SKIPE IOIP ;WRITES IN PROGRESS?
JRST .-1 ;YES, WAIT FOR COMPLETION
MOVE T1,CTYLNO
TXO T1,.TTDES ;MAKE VALID DESIGNATOR
HRROI T2,[ASCIZ /
Shutdown complete
/]
TTMSG ;NOTIFY OPERATOR
MOVEI T1,^D15000
DISMS
HALTF
;ROUTINE TO SEND GOING DOWN MESSAGE TO ALL LINES
THSYS: STKVAR <TIM,<MSG,20>>
MOVEM T1,TIM ;SAVE NUMBER OF MINUTES
HRROI T1,MSG ;INIT PTR TO MSG
HRROI T2,[ASCIZ /
[System going down/]
SETZ T3,
SOUT
MOVE T2,TIM ;GET TIME
CAILE T2,^D60 ;LESS THAN ONE HOUR?
JRST THSYS1 ;NO - SPECIAL MESSAGE
HRROI T2,[ASCIZ / in /]
SETZ T3,
SOUT
MOVE T2,TIM ;GET TIME
CAIN T2,1 ;THE 'ONE' CASE?
JRST [ HRROI T2,[ASCIZ /one minute!!]
/]
JRST HSYS51] ;YES, SPECIAL MESSAGE
MOVEI T3,^D10
NOUT
JFCL
HRROI T2,[ASCIZ / minutes/]
SETZ T3,
SOUT ;APPEND TO MESSAGE
THSYS1: HRROI T2,[ASCIZ / at /]
SETZ T3,0
SOUT
MOVE T2,HSYST1 ;TELL ACTUAL TIME
MOVEI T3,0
ODTIM ;IN MESSAGE
HRROI T2,[ASCIZ /]
/]
HSYS51: SETZ T3,
SOUT
HRROI T2,MSG ;POINT TO CONSTRUCTED MSG
MOVE T3,FACTSW
MOVE T4,TIM
SKIPL HSYST3 ;THE FIRST TIME? OR...
CAIG T4,5 ;5 MIN OR LESS?
CAIA ;YES, ALWAYS SEND
TXNE T3,SF%MS1 ;WANT LEVEL 1 MESSAGES?
CALL ALLMSG ;SEND TO ALL LINES
MOVE T1,TIM ;RESTORE TIME
RET
;ROUTINE TO SEND LAST MESSAGE, INCLUDING EXPECTED UPTIME.
DWNMSG: STKVAR <<MSG,20>>
HRROI T1,MSG
HRROI T2,[ASCIZ /
[System down/]
SETZ T3,
SOUT
SKIPN HSYST4 ;HAVE AN UPTIME?
JRST DWNMS1 ;NO
HRROI T2,[ASCIZ /, up again at /]
SOUT
MOVE T2,HSYST4 ;GET UPTIME
MOVEI T3,0 ;STANDARD FORMAT
ODTIM ;CONVERT TIME TO TEXT
DWNMS1: HRROI T2,[ASCIZ /]
/]
SETZ T3,
SOUT
HRROI T2,MSG ;HAVE TEXT, NOW SEND IT TO ALL LINES
CALL ALLMSG
RET
;PERIODIC (10 SEC) CHECK OF THINGS
CHKR:: XJRSTF [0
MSEC1,,.+1] ;RUN IN SECTION 1
SETZM JB0FLG ;CLEAR REQUEST FLAG
MOVE 1,TODCLK
ADD T1,CHKPER ;NOW PLUS MAX CHECK PERIOD
MOVEM 1,CHKTIM ;LEAVE FOR SCHED TO CHECK
CALL RESLCK ;LOCK OR UNLOCK RESIDENT FREE SPACE
CALL DTEPOL ;GO SEE IF ANY DTE'S NEED ATTENTION
SKIPL DRMJ0R ;DRUM JOB 0 REQUEST?
CALL CHKDRM ;YES
MOVE 1,DSKRCE ;DISK RECOVERABLE ERRORS
CAME 1,CHKDRE ;DIFFERENT THAN LAST CHECK?
CALL CHKDE1 ;YES, GO PRINT INFO
MOVE 1,DSKNRE ;DISK NON-REC ERRORS
CAME 1,CHKDNE ;DIFFERENT?
CALL CHKDSK ;PRINT INFO
SKIPE MTAJB0 ;MTA ON LINE INTERRUPT?
CALL MTASSP ;YES REQUEST SETSPD
SKIPE USGBEG ;CHECK USAGE QUEUE
CALL USGMES ;HAVE SOMETHING - EMPTY QUEUE
CALL CHKCKP ;CHECK ON CHECKPOINT
CALL CHKASC ;Check for accounting shift change
CALL DDMP0 ;DISK BACKUP
CALL CHKBGS ;CHECK IF TIME TO STORE ASCII TIME
SKIPE A,HSYST1 ;SHUTDOWN PROCESS ACTIVE?
CAMN A,[-1] ;OR IS SYSTEM SHUTDOWN
SKIPA ;SYSTEM SHUTDOWN OR PROCESS NOT ACTIVE
CALL CHKHSY ;YES, CHECK IT
MOVE A,TODCLK
CAMGE A,UMSGTM ;TIME FOR USER MESSAGES?
JRST CHKUM1 ;NO
CALL CHKDKS ;CHECK DISK SPACE
CALL CHKDMS ;CHECK DRUM SPACE
CALL CHKSPT ;CHECK SPT SPACE
MOVE A,TODCLK ;SET TIME FOR NEXT MSG
ADD A,[^D<5*60000>] ;IN 5 MINUTES
MOVEM A,UMSGTM
CHKUM1: CALL CHKNET ;CHECK STATE OF ARPANET
CALL CHKMOS ;CHECK IF MEMORY DIAG NEEDS TO RUN
MOVEI A,^D30000 ;SETUP TO DISMISS FOR 30 SEC
SKIPE B,HSYST1 ;SHUTDOWN ACTIVE?
CAMN B,[-1] ;OR SYSTEM SHUTDOWN?
SKIPA ;NO SHUTDOWN OR ALREADY SHUTDOWN
SKIPGE B,HSYST2 ;YES, REASONABLE TIME TO WAIT?
JRST CHKUM2 ;NOT ACTIVE OR BAD TIME
CAMLE A,B ;LESS THAN 30 SECONDS AWAY
MOVE A,B ;YES, DISMISS UNTIL THEN
CHKUM2: CALL SETBKT ;SETUP TIME FOR DISMISS TEST
HRRI A,JB0TST ;OR JB0FLG
MOVSI B,FHV1 ;LOW BLOCK PRIORITY
HDISMS
JRST CHKR
;MAXIMUM CHECK PERIOD - USED TO SET SCHEDULER ALARM
CHKPER: ^D<4*60000> ;4 MINUTES
RESCD
JB0TST: SKIPE JB0FLG ;EXPLICIT REQUEST?
JRST 1(4) ;YES, WAKEUP
JRST BLOCKT ;NO, GO TEST TIME
SWAPCD
NR UMSGTM,1 ;TIME OF NEXT USER MESSAGES
NR MOSFRK,1 ;FORK I.D. OF MEM DIAG FORK
NR MTCHNG,1 ;FLAG FOR MTA STATUS CHANGE
CHKH1: CALL TTDECP ;OUTPUT DECIMAL
MOVEI 2," "
BOUT
CHKR1: CALL LGTAD ;CURRENT TIME AND DATE
JUMPL 1,CHKR2 ;IF NOT SET
MOVE 2,1
MOVEI 1,101
SETZ 3,
ODTIM ;INCLUDE TAD WITH MESSAGE
CHKR2: TMSG <
>
RET
;INITIATE PAGE MOVEMENT TO DISK IF APPROPRIATE
DDMP0: MOVE A,DRMFRE ;DRUM SPACE LOW?
CAMGE A,DRMIN0
JRST [ TMSG <DDMP: SWAP SPACE LOW ACTION.
>
JRST DDMPA]
MOVE A,TODCLK ;TIME FOR NEXT CYCLE?
CAMGE A,DDTIME
RET ;NO
DDMPA: CALL DDMP ;DO THE WORK
RET ;DDMP FAILED. RUN IT AGAIN ASAP
MOVX A,^D60000 ;SET TIME FOR NEXT CYCLE AS 1 MINUTE
ADD A,TODCLK ; FROM NOW.
MOVEM A,DDTIME
RET
; ROUTINE TO REQUEST SETSPD FOR MAGTAPE ON LINE
MTASSP: SETZM MTAJB0 ;CLEAR REQUEST FLAG
MOVX T1,GJ%OLD!GJ%PHY!GJ%SHT
HRROI T2,SETSPD ;GET POINTER TO "SYSTEM:X-SETSPD.EXE"
MOVEI T3,4 ;START AT ENTRY VECTOR POSITION 4
CALL RUNDII ;RUN SETSPD AND WAIT UNTIL IT'S DONE
JFCL ;IGNORE FAILURE
RET
;ROUTINE CALLED BY CHKR TO SEE IF ANY ACTION NEEDED FOR THE
;MOS MEMORY DIAGNOSTIC
CHKMOS: SKIPN T1,MOSFRK ;NOW RUNNING?
JRST CHKMO1 ;NO. SEE IF WE SHOULD RUN IT
RFSTS ;YES. SEE WHAT IT IS DOING
LOAD T1,RF%STS,T1 ;GET ITS STATUS
CAIE T1,.RFHLT ;HALTED?
CAIN T1,.RFFPT ;OR ERROR?
SKIPA T1,MOSFRK ;YES.
RET ;NO. ALL DONE THEN
KFORK ;KILL THE PROCESS
SETZM MOSFRK ;NO MORE FORK HERE
CALL MOSULE ;UNLATCH CONTROLLER NOW
;HERE IF NO FORK NOW RUNNING. SEE IF ONE NEEDED
CHKMO1: SKIPE ERRTBL ;HAVE SOME ENTRIES TO PROCESS
CALL RUNMOS ;YES. START THE DIAG
RET ;DONE
;ROUTINE TO RUN THE MOS MEM DIAGNOSTIC
RUNMOS: TDZA T3,T3 ;MAIN ENTRY POINT
RUNMO1: MOVEI T3,1 ;SYS START UP ENTRY
MOVX T1,<GJ%OLD!GJ%SHT!GJ%PHY>
HRROI T2,[ASCIZ /SYSTEM:TGHA.EXE/] ;THE DIAG
CALL RUNDIR ;RUN TGHA
RET ;DIDN'T DO IT.
MOVEM T1,MOSFRK ;SAVE FORK HANDLE FOR LATER
RET ;AND DONE
;ROUTINE CALLED BY JOB 0 TO FINISH LOADING UP SYSERR BLOCK
; FOR BUGHLT'S AND BUGCHK'S
;ACCEPTS IN T1/ ADDRESS OF SYSERR BLOCK
;RETURNS +1: ALWAYS
LOGBUG::SAVEQ ;SAVE PERMANENT ACS
TRVAR <BUGSP,BUGPNM,BUGTAD>
MOVEM T1,Q1 ;SAVE POINTER TO SYSERR BLOCK
MOVEI T1,.PRIOU ;SEND MESSAGE TO CTY
MOVE T4,SEBDAT+BG%FLG(Q1) ;GET TYPE OF BUG CHECK
HRROI T2,[ASCIZ/
********************
*BUG/]
SETZ T3,
SOUT ;START MESSAGE
HRROI T2,[ASCIZ/HLT "/]
CAIN T4,BG%CHK ;BUGCHK?
HRROI T2,[ASCIZ/CHK "/] ;YES
CAIN T4,BG%INF ;INFORMATIONAL BUG CHECK?
HRROI T2,[ASCIZ/INF "/] ;YES
SOUT
MOVE T4,[POINT 6,SEBDAT+BG%NAM(Q1)]
LOGBF1: ILDB T2,T4 ;NOW TYPE OUT 6 CHAR NAME
JUMPE T2,LOGBF2 ;IF AT END, STOP TYPING
ADDI T2," " ;TRANSLATE SIXBIT TO ASCII
BOUT ;OUTPUT CHARACTER
TLNE T4,770000 ;AT END OF NAME YET?
JRST LOGBF1 ;NO, LOOP BACK FOR REST OF CHARS
LOGBF2: HRROI T2,[ASCIZ/" at /]
SOUT
MOVE T2,SEBDAT+BG%DAT(Q1) ;GET TIME AND DATE OF BUG CHECK
ODTIM ;TYPE OUT TIME AND DATE
SETZB T2,BUGSP ;CLEAR POINTERS
SKIPN Q2,BUGTP ;TABLE POINTER EXIST?
JRST LOGBF4
HRROI T2,[ASCIZ/
*/]
SOUT
LOGBF3: MOVE T4,0(Q2) ;SEARCH FOR ADDRESS IN TABLE
HLRZ T2,T4 ;GET ADDRESS
CAME T2,SEBDAT+BG%ADR(Q1) ;FOUND IT?
AOBJN Q2,LOGBF3 ;NO, LOOP BACK TIL WE DO
JUMPGE Q2,[HRROI T2,[ASCIZ/Message not found for this address/]
JRST LOGBF4]
HRROI T2,0(T4) ;GET POINTER TO MESSAGE STRING
HRRZM T2,BUGSP ;SAVE IT FOR SYSERR BLOCK
LOGBF4: SOUT ;TYPE OUT STRING
SETZM BUGPNM ;START WITH A NULL PROGRAM NAME
SKIPGE SEBDAT+BG%JOB(Q1) ;IS THERE A JOB?
JRST LOGBF5 ;NO, SKIP JOB/USER LINE
HRROI T2,[ASCIZ/
*Job: /]
SOUT
HRRZ T2,SEBDAT+BG%JOB(Q1) ;GET JOB NUMBER
MOVEI T3,12 ;TYPE IT IN DECIMAL
NOUT
JFCL
MOVE T2,JOBPNM(T2) ;GET PROGRAM NAME
MOVEM T2,BUGPNM ;SAVE NAME OF PROGRAM
HRROI T2,[ASCIZ/, User: /]
SETZ T3,
SOUT
HRRZ T2,SEBDAT+BG%USR(Q1) ;GET USER LOGGED IN DIR NUMBER
HRLI T2,USRLH ;TURN IT INTO PROPER FORMAT USER NUMBER
DIRST ;TYPE OUT USER NAME
MOVEI T1,.PRIOU ;FAILED. RESTORE DESTINATION ADDRESS
LOGBF5: SKIPG Q2,SEBDAT+BG%RCT(Q1) ;GET COUNT OF REGISTERS SAVED
JRST LOGBF7 ;NO REGISTERS TO BE TYPED
HRROI T2,[ASCIZ/
*Additional data: /]
SOUT
MOVEI T4,SEBDAT+BG%REG(Q1) ;GET POINTER TO REGISTER AREA
LOGBF6: MOVE T3,[NO%MAG+10] ;TYPE THEM IN UNSIGNED OCTAL
MOVE T2,0(T4) ;GET NEXT REG TO TYPE
NOUT
JFCL
SOJLE Q2,LOGBF7 ;DONE?
HRROI T2,[ASCIZ/, /] ;NO
SETZ T3,
SOUT
AOJA T4,LOGBF6 ;GO TYPE OUT REST
LOGBF7: HRROI T2,[ASCIZ/
********************
/]
SETZ T3,
SOUT
MOVE T1,CRSTD1 ;GET DATE OF BUGCHK
CAMN T1,[-1] ;IS THERE ONE SET?
CALL LGTAD ;NO, SEE IF IT IS SET NOW
MOVEM T1,BUGTAD ;SAVE DATE AND TIME OF BUGCHK
MOVE T1,Q1 ;GO COPY REST OF DATA TO BLOCK
MOVE T2,[-NBUGET,,BUGET]
CALL SEBCPY
JFCL
SOS BUGCNT ;COUNT DOWN THE QUEUED UP BLOCK COUNT
SETZM BUGCHK ;CLEAR OUT LAST BUGCHK ADR
RET ;FINISHED
BUGET: SEBPTR BG%SVN,SBTSTR,SVN ;SYSTEM NAME
SEBPTR BG%PNM,SBTWD,BUGPNM ;PROGRAM NAME
SEBPTR BG%DAT,SBTWD,BUGTAD ;TIME AND DATE OF CRASH
SEBPTR BG%MSG,SBTSTR,@BUGSP ;BUG MESSAGE
NBUGET==.-BUGET
;SEND TEXT TO ALL LINES, WAIT FOR COMPLETION
; 2/ PTR TO ASCIZ MESSAGE
; CALL ALLMSG
; RETURN +1 ALWAYS, WAIT LONG ENOUGH FOR MESSAGE TO APPEAR ON 110 BAUD
;LINES.
ALLMSG::SETZ 1, ;SAY NO WAIT
REPEAT 0,<
HLRZ 3,2 ;CHECK LH OF POINTER
CAIN 3,-1 ;DEFAULT?
HRLI 2,(<POINT 7,0>) ;YES, DO IT
>
SETO T3, ;SAY ALL LINE
TTMSG ;TYPE THE STUFF
ERJMP [BUG (TTFSMS) ;FAILED TO SEND MESSAGE
JRST .+1] ;CONTINUE
RET ; AND RETURN
CHKDRM: HRROI 1,[ASCIZ /
*****DRUM ERR: /]
PSOUT
MOVSI 6,-NDRMEW ;# OF DRUM ERROR WORDS
HRRI 6,DRMCFE ;FINISH AOBJN PTR
CHKD1: MOVE B,0(6) ;GET WORD
CALL TTOCTP ;PRINT IT
TMSG <
>
AOBJN 6,CHKD1
SETOM DRMJ0R ;RESET REQUEST FLAG
RET ;RETURN
CHKDMS: MOVE 1,DRMFRE
CAMLE 1,DRMIN0 ;DRUM SPACE LOW?
RET ;NO
HRROI 2,[ASCIZ /
[Caution--Swapping space low]
/]
MOVX T3,SF%MS0
TDNE T3,FACTSW ;WANT LEVEL 0 MESSAGES?
CALL ALLMSG ;YES, DO IT
HRROI 1,[ASCIZ /
*****Swapping space low, /]
PSOUT
MOVE 2,DRMFRE
JRST CHKH1 ;PRINT FREE COUNT
CHKSPT: MOVE 1,SPTC
CAMGE 1,SPC1 ;SPT LOW?
RET ;NO
HRROI 2,[ASCIZ /
[Caution--SPT space low]
/]
MOVE T3,FACTSW
TXNE T3,SF%MS0 ;WANT LEVEL 0 MESSAGES?
CALL ALLMSG ;YES, DO IT
HRROI 1,[ASCIZ /
*****SPT space low, /]
PSOUT
MOVN 2,[NOFN-SSPT]
SUB 2,SPTC ;SPACE LEFT
JRST CHKH1
;CHECK DSK SPACE
CHKDKS: SKIPGE T1,EXPFRK ;EXPUNGE FORK RUNNING?
RET ;YES - EXIT QUIETLY
JUMPE T1,CKDKS1 ;NO - EXISTS?
SETZM EXPFRK ;YES - KILL IT
KFORK ;...
CKDKS1: SETZM T1 ;ASSUME PUBLIC STRUCTURE
CALL GSTRPG ;GET COUNT OF USED AND FREE PAGES ON STRUCTURE
MOVE T1,T2 ;GET FREE COUNT
SUB 1,SYSSPC ;LESS 'BUFFER'
CAILE 1,SYWRND ;LOW?
RET ;NO
PUSH P,2 ;SAVE FREE COUNT
HRROI 2,[ASCIZ /
[Caution--Disk space low on system structure]
/]
MOVE T3,FACTSW
TXNE T3,SF%MS0 ;WANT LEVEL 0 MESSAGES?
CALL ALLMSG ;YES, DO IT
SKIPN T1,EXPTIM ;ENOUGH TIME SINCE LAST EXPUNGE?
MOVX T1,<EXWTIM*^D60000> ;DONT DO EXPUNGES IN FIRST n MIN
CAMG T1,TODCLK
CALL EXPALL ;YES, DO EXPUNGE *
HRROI 1,[ASCIZ /
*****Disk space low on system structure, /]
PSOUT
POP P,2 ;RESTORE COUNT OF FREE PAGES
CALLRET CHKH1
;ROUTINE TO DO EXPUNGE * WHEN DISK SPACE LOW
;START FORK AND MARK IT RUNNING
; CALL EXPALL
;RETURNS +1 ALWAYS
NR EXPTIM,1 ;TIME OF LAST EXPUNGE PLUS MIN INTERVAL
NR EXPFRK,1 ; 0 := NO EXPUNGE FORK
; -1,,FRKH := FORK RUNNING
; 0,,FRKH := EXPUNGE DONE
EXPALL: MOVX T1,CR%CAP ;PASS CAPABILITIES DOWN
CFORK ;CREATE FORK
BUG (EXPAFK)
HRROM T1,EXPFRK ;MARK FORK RUNNING
MOVEI T2,EXPAL0 ;START INFERIOR
MSFRK ; IN MONITOR MODE
RET ;RETURN (WAIT TILL DONE)
;EXPUNGE FORK STARTS HERE
EXPAL0: MOVSI T1,(UMODF) ;SET FUNNY JSYS CONTEXT
MOVEM T1,FFL
SETZM FPC ;SET PC
MCENTR
CALL EXPAL1 ;AWAY WE GO
HRRZS EXPFRK ;SAY WE ARE DONE
HALTF ;AND STOP
EXPAL1: MOVX T2,SF%CDE!SF%BTE
TDNE T2,FACTSW ;ANY BIT TABLE ERRORS?
RET ;YES. DON'T EXPUNGE
HRROI T2,[ASCIZ /
[Deleted files will be expunged from system structure in 30 seconds]
/]
MOVE T3,FACTSW
TXNE T3,SF%MS1 ;WANT LEVEL 1 MESSAGES?
CALL ALLMSG
MOVEI T1,^D30000
DISMS ;GIVE USERS TIME TO UNDELETE
MOVX T1,RC%AWL ;ALLOW WILD CARDS
HRROI T2,[ASCIZ "PS:<*>"]
RCDIR ;GET FIRST DIRECTORY NUMBER
ERJMP [BUG (EXPRCD)
JRST EXPAL3] ;WE TRIED
EXPAL2: SETZ T1, ;NOTHING SPECIAL
MOVE T2,T3 ;PUT DIRECTORY NUMBER IN RIGHT PLACE
DELDF ;EXPUNGE
ERJMP .+1 ;IGNORE FAILURES
MOVX T1,RC%STP!RC%AWL ;STEP TO NEXT
MOVE T3,T2 ;WHERE WE LEFT OFF
HRROI T2,[ASCIZ "PS:<*>"] ;WHERE WE STARTED
RCDIR ;...
ERJMP EXPAL3 ;QUIT ON FAILURE
TXNN T1,RC%NMD ;DONE?
JRST EXPAL2 ;NO - KEEP GOING
EXPAL3: MOVX T1,<EXWTIM*^D60000> ;DONE, SET NEXT POSSIBLE TIME
ADD T1,TODCLK
MOVEM T1,EXPTIM
HRROI T2,[ASCIZ /
[System structure expunge completed]
/]
MOVE T3,FACTSW
TXNE T3,SF%MS1 ;WANT LEVEL 1 MESSAGES?
CALL ALLMSG ;NOTIFY USERS
RET ;DONE
CHKDSK: RET ;NOP
CHKDE1: RET ;NOP
;UTILITY NUMBER PRINTERS
;DECIMAL PRINT FOR LESS THAN 18 BIT NUMBERS
;OCTAL PRINT FOR MORE THAN 18 BIT NUMBERS DOES DDT HALFWORD FORMAT.
;B/ NUMBER TO PRINT
; CALL TTXXXP ;XXX=(DEC,OCT)
;NUMBER PRINTED TO PRIMARY OUTPUT
TTDECP: SKIPA C,[EXP ^D10] ;IN DECIMAL
TTOCTP::MOVEI C,^D8 ;IN OCTAL
MOVEI A,.PRIOU ;OUTPUT TO PRIMARY
TLNN B,-1 ;LH NON-0?
JRST TTOCT1 ;NO, SIMPLE PRINT
PUSH P,B ;SAVE DATA
HLRZ B,B ;PRINT LH
NOUT
JFCL
MOVEI B,"," ;PRINT ,,
BOUT
BOUT
POP P,B ;RECOVER DATA
HRRZ B,B
TTOCT1: NOUT ;PRINT RH
JFCL
RET
;ANY INTERRUPT WILL EVENTUALLY TRAP TO HERE
CHKRI: MOVE P,UPP
ADD P,BHC+2 ;RESET STACK
SETZM SLOWF
SETOM INTDF
SETZM PSIBW
HRROI 1,[ASCIZ /
*****Job 0 crash, continuing
/]
PSOUT
JRST CHKR
NR CHKDRE,1 ;COUNT OF REC. ERRORS AT LAST REPORT
NR CHKDNE,1 ; "" NON-REC. ""
NR CHKDMC,1
;CHKBGS - CHECK IF TIME TO STORE NEW ASCII TIME AND DATE FOR TYPEOUT
; AT BUGHLT TIME
;
;RETURNS: +1, ALWAYS
CHKBGS: MOVE T1,TODCLK ;GET CURRENT DATE AND TIME
CAML T1,BUGTMS ;TIME TO STORE ASCII STRING?
SKIPGE TADIDT ;HAS TIME BEEN SET
RET ;NO, NOT YET
MOVX T2,<BUGINT> ;GET TIME INTERVAL FOR STORING STRING
ADD T1,T2 ;GET NEXT TIME FOR STORING STRING
MOVEM T1,BUGTMS ;STORE
MOVE T1,[POINT 7,BUGTIM] ;GET BYTE POINTER FOR STORING TIME
MOVNI T2,1 ;GET CURRENT TIME AND DATE
SETZ T3, ; IN DEFAULT FORMAT
ODTIM
MOVE T2,"/" ;STORE DELIMITER FOR BUGMSG ROUTINE
IDPB T2,T1
RET
;ROUTINE TO FINISH LOGGING OF PARITY ERROR - RUN IN JOB 0 CONTEXT
; T1/ ADDRESS OF SYSERR BLOCK
PFCPJ0::SAVEQ
HLRZ FX,SEBDAT+PT%JOB(T1) ;GET FORKX AT TRAP
CAIE FX,-1
SKIPGE FKPT(FX)
RET ;IN SCHED OR FORK KILLED, NO DATA
LOAD T2,FKJOBN ;GET JOB NUMBER
HRRM T2,SEBDAT+PT%JOB(T1) ;REPORT IT
HRRZ T3,JOBDIR(T2) ;GET LOGGED-IN DIRECTORY
HRLI T3,USRLH ;MAKE IT A USER NUMBER
MOVEM T3,SEBDAT+PT%USR(T1) ;REPORT IT
MOVE T3,JOBPNM(T2) ;GET PROGRAM NAME
MOVEM T3,SEBDAT+PT%PGM(T1) ;REPORT IT
RET
;THE CHKAC JSYS - CHECK THE ACCESSABILITY OF A FILE OR DIRECTORY
;ACCEPTS IN 1/ COUNT OF ARGUMENTS
; 2/ LOCATION OF ARGUMENT BLOCK
; CHKAC
;RETURNS +1: ERROR - ERROR CODE IN AC 1
; +2: AC 1 = 0 ACCESS NOT ALLOWED
; AC 1 = -1 ACCESS IS ALLOWED
;ARGUMENT BLOCK:
; .CKAAC DESIRED ACCESS CODE
; .CKALD LOGGED IN USER NUMBER OF THE USER DOING THE ACCESSING
; .CKACD CONNECTED STRUCTURE,,DIRECTORY OR POINTER TO STRUCTURE/
; DIRECTORY STRING
; .CKAEC ENABLED CAPABILITIES OF THE USER
; .CKAUD STRUCTURE,,DIRECTORY OR POINTER TO STRUCTURE/DIRECTORY STRING
; FOR FILE BEING ACCESSED
; IF CK%JFN IS SET IN AC1, THIS IS JFN FOR FILE
; .CKAPR PROTECTION OF FILE BEING ACCESSED
.CHKAC::MCENT ;ENTER JSYS
STKVAR <<SVT3T4,2>>
UMOVE Q1,2 ;GET LOCATION OF ARGUMENT BLOCK
XCTU [HRRZ T1,1] ;GET LENGTH OF ARGUMENT BLOCK
XCTU [HLL Q1,1] ;GET THE FLAGS
TXNN Q1,CK%JFN ;SPECIFIING A JFN?
;**;[2603] REPLACE 4 LINES AT .CHKAC:+6L TAM 5-APR-82
CAILE T1,.CKAPR ;[2603] NO, MUST INCLUDE PROTECTION
CAIGE T1,.CKAPR ;[2603] YES, PROTECTION NOT NEEDED
RETERR (CKAX1) ;[2603] LENGTH IS TOO SHORT
XCTU [MOVE T1,.CKAEC(Q1)] ;[2603] LENGTH IS OK, GET CAPABILITIES
TRNE T1,SC%WHL!SC%OPR ;IS THIS USER A WHEEL?
JRST CHKACT ;YES, ACCESS IS LEGAL ALWAYS
XCTU [HRRZ P1,.CKAAC(Q1)] ;GET ACCESS CODE
UMOVE T1,.CKAUD(Q1) ;GET THE JFN OR DIRECTORY DESIGNATOR
TXNE Q1,CK%JFN ;IS USER GIVING A JFN?
JRST CHKAC2 ;YES
CALL CNVSTD ;CONVERT TO A DIRECTORY NUMBER
RETERR () ;ILLEGAL FORMAT OF STRING
CHKAC2: MOVE P2,T1 ;SAVE JFN OR DIR NUMBER IN P2
UMOVE T1,.CKALD(Q1) ;GET THE LOGGED IN USER NUMBER
LOAD T2,NMFLG,T1 ;GET BITS 0-2
CAIN T2,NUMVAL ;IS THIS A NUMBER?
JRST CHKAC3 ;YES, DONT NEED TO CONVERT THE STRING
CALL CNVSTU ;CONVERT STRING TO USER NUMBER
RETERR () ;FAILED
CHKAC3: CALL CNVDIR ;CONVERT IT TO A DIR NUMBER
MOVE P3,T1 ;SAVE DIRECTORY # IN P3
UMOVE T1,.CKACD(Q1) ;GET CONNECTED DIR # INTO P4
CALL CNVSTD ;GET DIR NUMBER FROM STRING
;**;[2602] CHANGE 1 LINE AT CHKAC3:+4L TAM 30-MAR-82
SETZ T1, ;[2602] SAY FAILED TO GET A DIRECTORY NUMBER
MOVE P4,T1 ;SAVE DIR NUMBER FOR LATER
TXNN Q1,CK%JFN ;GIVING A JFN?
XCTU [HRLZ P5,.CKAPR(Q1)] ;NO, GET PROTECTION
TXNE Q1,CK%JFN ;USER GIVING A JFN?
JRST [ HRRZ T1,P2 ;YES, GET IT
CALL GETFPD ;GET PROT AND DIR #
RETERR (CKAX4) ;BAD JFN
MOVE P2,T1 ;SAVE DIR #
HRLZ P5,T2 ;SAVE PROTECTION
JRST .+1]
MOVE T1,P2 ;MAP IN DIRECTORY OF FILE
CALL SETDIR ;FIRST CHECK LEGALITY OF DIR #
RETERR (CKAX2) ;ILLEGAL DIR #
ULKDIR ;UNLOCK DIR, BUT STAY NOINT
CAIL P1,.CKADR ;IS THIS A DIRECTORY ACCESS CHECK?
JRST CHKDIR ;YES, GO SET UP DIR PROTECTION VALUE
MOVEI T4,<DP%RD>B35 ;MUST ALSO CHECK READ ACCESS TO DIR
CHKAC0: MOVSI Q2,40 ;SET UP MASK WORD
MOVN T1,P1 ;GET CODE
LSH Q2,0(T1) ;FORM THE ACCESS CHECK MASK
TDNE Q2,P5 ;IS THIS MODE ALLOWED FOR WORLD?
JRST [ MOVE T1,DIRORA ;YES, NOW SEE IF LEGAL TO REF DIR
LOAD T1,DRPRT,(T1) ;GET DIRECTORY PROTECTION
TDNE T4,T1 ;LEGAL TO REFERENCE IT?
JRST CHKACT ;YES, THIS IS LEGAL THEN
JRST .+1] ;NO, GO SEE IF THIS IS OWNER OR GROUP
HLLZ T1,P5 ;MAKE OWNER SUPERSET OF GROUP
LSH T1,6
IORM T1,P5 ;DONT ALLOW GROUP MORE PRIVS THAN OWNER
LSH Q2,^D12 ;NOW SEE IF LEGAL FOR OWNER
LSH T4,^D12 ;DO SAME FOR DIR PROTECTION MASK
MOVE T3,DIRORA ;GET BASE ADR OF MAPPED DIR
LOAD T3,DRPRT,(T3) ;GET DIR PROTECTION
MOVE T2,T3
LSH T2,6 ;MAKE OWNER SUPERSET OF GROUP
IORM T2,T3 ;T3 = DIR PROTECTION
TDNE T4,T3 ;LEGAL ACCESS FOR OWNER IN DIRECTORY?
TDNN Q2,P5 ;YES, IS FILE ACCESS LEGAL?
JRST CHKACF ;IF NOT LEGAL FOR OWNER, THEN FALSE
CAME P3,P2 ;IS THIS FILE IN SAME DIR AS USER?
CAMN P4,P2 ;EITHER LOGGED IN OR CONNECTED
JRST CHKACT ;YES, RETURN TRUE
DMOVEM T3,SVT3T4 ;SAVE T3 AND T4
SETZ P4, ;FLAG FOR DIFFERENT STRUCTURES
HLRZ T1,P2 ;GET STRUCTURE TO ACCESS
HLRZ T2,P3 ;GET LOGGED IN STRUCTURE UNIQUE CODE
CAMN T1,T2 ;ARE THEY THE SAME?
JRST CHKAC4 ;YES, FORGET DOMESTIC STR TEST
HLRZ T1,P2 ;GET STRUCTURE UNIQUE CODE
CALL CNVSTR ;GET STRUCTURE NUMBER
RETERR () ;COULDN'T FIND STRUCTURE
MOVE T2,T1 ;SAVE STRUCTURE NUMBER
CALL ULKSTR ;UNLOCK STRUCTURE FROM CNVSTR
MOVE T2,STRTAB(T2) ;GET STRUCTURE DATA BLOCK ADDRESS
MOVE T1,SDBSTS(T1) ;GET STATUS OF STRUCTURE
TXNN T1,MS%DOM ;IS IT DOMESTIC?
JRST CHKACF ;NO, RETURN FALSE
MOVEI T2,MAXLW+1 ;GET SOME JSB FREE SPACE
CALL ASGJFR ; IN WHICH TO STORE USER NAME
RETERR (SACTX2) ;INSUFFICIENT RESOURCES
MOVE P4,T1 ;STORE FREE SPACE BLOCK ADDRESS
AOS T1 ;DON'T STEP ON HEADER
HRLI T1,-1 ;MAKE IT A POINTER
MOVE T2,P3 ;GET LOGGED IN DIRECTORY
HRLI T2,USRLH ;MAKE IT A USER NUMBER
DIRST ;GET USER NAME
JRST [ MOVEI T1,JSBFRE ;RELEASE FREE SPACE
MOVE T2,P4
CALL RELFRE
RETERR ()]
MOVE T1,P4 ;GET ADDRESS OF NAME
HLRZ T2,P2 ;GET STUCTURE UNIQUE CODE
CALL DIRLKX ;DOES USER HAVE A DIRECTORY ON THIS STR?
JRST [ MOVEI T1,JSBFRE ;NO DIRECTORY ON THAT STRUCTURE
MOVE T2,P4 ;RELEASE FREE SPACE
CALL RELFRE
JRST CHKACF] ;RETURN FALSE
MOVE T2,P4 ;GET ADDRESS OF JSB SPACE
MOVE P4,T1 ;STORE DIRECTORY NUMBER
MOVEI T1,JSBFRE
CALL RELFRE ;RETURN JSB SPACE
HLL P4,P2 ;ADD STR UNIQUE CODE TO DIR NUMBER
CAMN P2,P4 ;TRYING TO ACCESS OUR OWN DIRECTORY?
JRST CHKACT ;YES, RETURN SUCCESS
MOVE T1,P2 ;MAP IN DESIRED DIRECTORY AGAIN
CALL SETDIR
RETERR ()
ULKDIR ;UNLOCK DIRECTORY
CHKAC4: DMOVE T3,SVT3T4 ;RESTORE T3 AND T4
LSH Q2,-6 ;NO, NOW SEE IF THIS IS SAME GROUP
LSH T4,-6 ;SAME FOR GROUP
TDNE T4,T3 ;LEGAL ACCESS TO DIR BY GROUPS?
TDNN Q2,P5 ;YES, LEGAL FOR GROUP?
JRST CHKACF ;NO, RETURN FALSE
CALL CPYDGP ;COPY DIR GROUPS INTO JSB
JRST CHKACF ;NO GROUPS
MOVE P6,T1 ;SAVE THE JSB POINTER
SKIPN T1,P4 ;TRYING TO ACCESS DIR ON PRIMARY STRUCTURE?
MOVE T1,P3 ;YES, GET LOGGED IN DIRECTORY
CALL SETDIR ;GET INFO ABOUT THIS USER
RETERR (CKAX2) ;ILLEGAL DIRECTORY NUMBER
ULKDIR ;UNLOCK THE DIRECTORY LOCK FROM GETDDB
MOVE Q1,P6 ;GET AOBJN POINTER TO DIR GROUP LIST
CHKAC1: HLRZ T1,0(Q1) ;GET FIRST MEMBER OF GROUP
CALL CHKUGP ;CHECK IT AGAINST USER GROUPS
SKIPA ;NO MATCH
JRST [ MOVE A,P6 ;MATCH FOUND
CALL RELGRP ;RELEASE THE SPACE IN THE JSB
JRST CHKACT] ;RETURN TRUE
HRRZ T1,0(Q1) ;GET NEXT MEMBER OF GROUP
CALL CHKUGP ;CHECK FOR MATCH
SKIPA ;NO MATCH
JRST [ MOVE A,P6 ;MATCHED!
CALL RELGRP ;RELEASE THE JSB SPACE
JRST CHKACT] ;RETURN TRUE
AOBJN Q1,CHKAC1 ;LOOP UNTIL LIST IS FINISHED
MOVE A,P6 ;RELEASE THE SPACE IN JSB
CALL RELGRP
CHKACF: TDZA T1,T1 ;RETURN FALSE
CHKACT: SETO T1, ;TRUE
UMOVEM T1,1 ;STORE ANSWER
SMRETN ;AND RETURN
CHKDIR: CAIL P1,.CKADR ;IS THIS A LEGAL FUNCTION CODE
CAILE P1,.CKACF
RETERR (CKAX3) ;NO, ILLEGAL ACCESS CODE
SUBI P1,.CKADR ;SET UP FOR MASK BUILDING
MOVE T4,DIRORA ;GET BASE OF DIR AREA
LOAD T4,DRPRT,(T4) ;GET DIR PROTECTION
HRL P5,T4 ;ONLY WANT 18 BITS
MOVEI T4,77 ;DONT CARE ABOUT DIR PROTECTION CHECK
JRST CHKAC0 ;GO FINISH JSYS
;ROUTINE TO COPY A LIST OF GROUPS TO THE JSB
; CALL CPYDGP OR CALL CPYUGP
;RETURNS +1: NO GROUPS
; +2: AOBJN POINTER TO LIST IN JSB RETURNED IN T1
CPYDGP::SE1CAL ;ENTER SEC 1
MOVE D,DIRORA ;GET BASE OF DIR AREA
LOAD D,DRDGP,(D) ;GET DIR GROUP LIST
JRST CPYUG0 ;ENTER COMMON CODE
CPYUGP::SE1CAL ;ENTER SEC 1
MOVE D,DIRORA ;GET BASE OF DIR AREA
LOAD D,DRUGP,(D) ;GET USER GROUP LIST
CPYUG0: JUMPE D,R ;IF 0, NO LIST
STKVAR <CPYUGA>
ADD D,DIRORA ;GET ABS ADR OF LIST
LOAD C,BLKTYP,(D) ;GET TYPE OF THIS BLOCK
CAIE C,.TYGDB ;MUST BE A DIRECTORY GROUP BLOCK
RET ;DIR IS SCREWED UP
LOAD B,BLKLEN,(D) ;GET LENGTH OF BLOCK
SOS B ;SKIP OVER HEADER
MOVEM D,CPYUGA ;SAVE ADR OF LIST
CALL ASGJFR ;GET A BLOCK FROM JSB
RET ;NO ROOM
MOVE D,CPYUGA ;GET BACK ADR OF LIST
HRRZ B,0(A) ;GET LENGTH OF DIR LIST
MOVNS B ;SET UP AN AOBJN POINTER TO JSB
HRL A,B
MOVE C,A ;LEAVE POINTER IN A
CPYUGL: MOVE B,1(D) ;GET NEXT ELEMENT IN LIST
MOVEM B,0(C) ;STORE IN JSB
AOS D ;STEP TO NEXT ELEMENT IN LIST
AOBJN C,CPYUGL ;LOOP TIL LIST IS COPIED
RETSKP ;RETURN SUCCESSFUL WITH POINTER IN A
;ROUTINE TO RELEASE A GROUP LIST FROM JSB
;ACCEPTS IN A/ POINTER TO LIST
; CALL RELGRP
;RETURNS +1: ALWAYS
RELGRP::HLRE B,A ;GET LENGTH OF BLOCK
HRRZS A ;INSURE IN THIS SECTION
MOVNM B,(A) ;STORE LENGTH IN BLOCK
HRRZ B,A ;GET ADR OF BLOCK
MOVEI A,JSBFRE
CALLRET RELFRE ;RELEASE THE BLOCK
;MDDT INTERNAL SUBROUTINE CALL. THIS SUBROUTINE IS THE INTERFACE
;BETWEEN MDDT AND THE REST OF THE MONITOR. CALL:
;
; AC1/ FUNCTION CODE
; AC2-AC4/ ARGUMENTS
; CALL .IMOPR
; ERROR RETURN
; SUCCESSFUL RETURN
.IMOPR::JUMPLE T1,R ;FAIL IF NOT POSITIVE
CAIG T1,IMMAX ;FUNCTION LEGAL?
SKIPN HSYBLK ;SYMBOLS HIDDEN? (FUNCTIONS SO FAR NEED THIS)
RET ;NO, GIVE ERROR RETURN
JRST @IMTAB-1(T1) ;GO TO PROPER ROUTINE
IMTAB: IFIW IMALC ;(1) ALLOCATE PAGES FOR USE
IFIW IMMAP ;(2) MAP PAGES OF THE SYMBOL SPACE
IFIW IMUMAP ;(3) UNMAP PAGES OF SYMBOLS
IMMAX==.-IMTAB ;HIGHEST FUNCTION
;FUNCTION .IMALC. ALLOCATES A PAGE FOR USE IN MAPPING SYMBOLS. PAGE
;IS RELEASED WHEN FORK IS DESTROYED. MULTIPLE CALLS WILL RETURN THE
;SAME PAGE. ARGUMENTS:
;
; T2/ NUMBER OF PAGES DESIRED (ONLY 1 IS LEGAL NOW)
;
;RETURNS PAGE NUMBER OF FIRST PAGE IN T1.
IMALC: CAIE T2,1 ;ASKING FOR ONE PAGE?
RET ;NO, FAIL
NOINT ;PREVENT INTERRUPTIONS
SKIPE T1,SYMPAG ;PREVIOUSLY ALLOCATED A PAGE?
JRST IMALCH ;YES, RETURN IT
CALL ASGPAG ;GET A NEW JSB PAGE
SETZ T1, ;NONE AVAILABLE
MOVEM T1,SYMPAG ;REMEMBER FOR LATER USE
IMALCH: OKINT ;INTERRUPTS OK NOW
LSH T1,-PGSFT ;CONVERT TO PAGE NUMBER
JUMPN T1,RSKP ;SKIP RETURN IF GOT A PAGE
RET ;OTHERWISE FAIL
;FUNCTION .IMMAP. MAP PAGES OF THE SYMBOL SPACE. USED BY MDDT
;AND SNOOP JSYS. ARGUMENTS:
;
; T2/ PAGE IN SYMBOL SPACE TO MAP
; T3/ PAGE IN MONITOR SPACE TO MAP TO
; T4/ COUNT OF PAGES TO MAP. 1B0 SET IF WRITE ENABLED
IMMAP: MOVE T1,T2 ;SET UP PAGE NUMBER TO MAP
HRL T1,SYMBAS ;AND PUT IN SPT INDEX OF SYMBOL MAP
TDNN T2,[-1,,777000] ;SYMBOL SPACE EXISTS ONLY IN SECTION 0
IMMAP1: TDNE T3,[-1,,776000] ;SEE IF PAGE IS SECTION 0 OR 1
RET ;IF NOT, ERROR
ANDI T3,777 ;MAKE SECTION 1 SAME AS SECTION 0
MOVE T2,T3 ;GET PAGE WHERE WE MAP TO
LSH T2,PGSFT ;TURN INTO ADDRESS
TXZE T4,1B0 ;WANT IT WRITE-ENABLED?
TXO T2,PTRW ;YES, SET WRITE BIT
TLNN T4,-1 ;CHECK REST OF LEFT HALF
TRNN T4,-1 ;AND MAKE SURE HAVE NONZERO COUNT
RET ;NO, ERROR
ADDI T3,-1(T4) ;CALCULATE LAST PAGE TO BE MAPPED
TRNE T3,777000 ;MAKE SURE IT STAYS IN SECTION 0
RET ;NO, ERROR
MOVE T3,T4 ;PUT COUNT IN RIGHT AC
CALL MSETMP ;DO THE MAPPING
RETSKP ;GOOD RETURN
;FUNCTION .IMUMP. UNMAP SYMBOL PAGES. ARGUMENTS ARE:
;
; T2/ PAGE IN NORMAL SPACE WHERE SYMBOLS WERE MAPPED
; T3/ COUNT OF PAGES TO UNMAP
IMUMAP: MOVE T4,T3 ;MOVE ARGS TO RIGHT ACS
MOVE T3,T2 ;SO CAN JOIN OTHER ROUTINE
SETZM T1 ;ZERO FOR UNMAP
CALLRET IMMAP1 ;GO DO THE WORK
;LOGOUT
.LGOUT::MCENT
CAME 1,[-1] ;SELF?
JRST ELOGO ;NO
MOVSI 1,(SC%LOG)
TDNN 1,CAPMSK ;LOG PERMITTED?
RETERR (LOUTX4) ;NO, ERROR RETURN
SETONE JSELO ;FLAG THAT JOB EXECUTED ITS OWN LGOUT
LOGO: SE1ENT ;GET TO SECTION 1
MOVE T1,JOBNO ;GET CORRECT JOB NUMBER
CALL LGOGOK ;CHECK TO SEE IF LOGO LEGAL
SKIPN FORKN ;TOP FORK?
JRST FLOGO1 ;YES
NOINT
HLRZ 1,FORKN ;NO, GET ITS NUMBER
HRRZ 2,SYSFK(1)
NOSKED
MOVX T1,FKPSI0+PSILO%
IORM 1,FKINT(2) ;REQUEST LOGOUT
CALL PSIR4
OKSKED
OKINT
JRST WAIT1 ;WAIT FOR TOP FORK TO KILL THE JOB
;ROUTINE CALLED TO LOGOUT ANOTHER JOB.
;ACCEPTS: A/ JOB NUMBER
;RETURNS: +1 WITH LOGOUT REQUESTED
RESCD ;MUST BE RESIDENT AS CALLED BY SCHEDULER
ELOGOO::NOSKD1 ; prevent races
SKIPGE JOBRT(T1) ; job exist?
JRST [ OKSKD1 ; no, fail
RET] ; ..
HRRZ 2,JOBPT(1) ;TOP FORK OF OBJECT JOB
MOVX T1,FKPSI0+PSILO%
IORM 1,FKINT(2) ;REQUEST LOGOUT
CALL PSIR4
OKSKD1 ;ALLOWING SCHEDULING AGAIN
RET ;AND DONE
;THE FOLLOWING IS RUN IN THE TOP FORK OF A JOB TO RESPOND TO
;A LOGOUT REQUEST FROM ANOTHER JOB.
;HERE FROM PSI SERVICE DEBREAK. FFL AND FPC SETUP.
SWAPCD
FLOGO:: MCENTR ;SIMULATE ENTRY FROM USER
; ..
;THE FOLLOWING CODE DOES THE ACTUAL LOGOUT. IT RUNS ONLY IN
;THE TOP FORK OF THE JOB BEING LOGGED OUT
; ..
FLOGO1: MOVX 1,LOGIOB ;SAY JOB DESTRUCTION IN PROGRESS
IORM 1,JOBBIT
MOVEI 1,400000
SETO 2,
DIC ;DEACTIVATE INTERRUPTS AND KEYS
CALL DTIALL
CALL NETLGO ;RELEASE ANY JOB-WIDE NETWORK RESOURCES
MOVEI T1,-4
KFORK ;DELETE FORKS
MOVE T1,JOBNO ;MARK THAT I AM NO LONGER OWNED
SETOM JOBONT(T1) ; ..
MOVSI T3,-NJOBS ;LOG OUT ANY JOBS WHICH I OWN
SJLGO1: HRRZ T2,JOBONT(3) ;DO I OWN THIS ONE?
CAME T2,JOBNO ; ..
JRST SJLGO2 ;NO.
MOVEI T1,0(T3) ;YES. LOG IT OUT.
LGOUT
JFCL ;SHOULD HAVE WORKED.
SETOM JOBONT(T3) ;MAKE IT UNOWNED, SO IT FINISHES
SJLGO2: AOBJN T3,SJLGO1 ;SEE IF I OWN ANY MORE JOBS
; ..
; ..
SJLGO4: SETO T1, ;CLEAR USER MAP OF TOP FORK
MOVSI 2,<.FHSLF!FH%EPN> ;THIS FORK
MOVE 3,[PM%CNT!PM%EPN!<1000>B35] ;REQUEST 1000 PAGES
PMAP
ERJMP .+1
MOVE FX,FORKX
;**;[2884]ADD 1 LINE AT SJLGO4:+6L TAM 9-DEC-82
RESET ;[2884] CLEAR JSBSTK MAPPINGS, ETC.
LOAD 1,FKJSB ;GET JSB
CALL WTSPT ;WAIT FOR SHR CNT OF 1
SKIPL CTRLTT
RESET ;RESET TTY MODES, ETC.
CALL UNPAGE ;CLEAR PAGE MODE
;**;[3075]ADD 2 LINES AT SJLGO4:+13L TAB 13-FEB-84
MOVE T1,FORKX ;[3075]THIS FORK.
CALL ENQFKR ;[3075]RELEASE ANY ENQ LOCKS OWNED BY THIS JOB.
MOVE 1,[CZ%ARJ+CZ%ABT+400000] ;WAIT+FLUSH NONX + THIS FORK
CLZFF
MOVE 1,FORKX ;NOW KILL PIDS OF THIS FORK
CALL PIDKFK ; INCLUDING JOB WIDE PIDS
CALL CLKREL ;RELEASE TIMER BLOCKS
MOVE 4,JOBNO
HRRZ 1,JOBDIR(4) ;GET LOGIN DIR
JUMPE 1,LOG1 ;DON'T EXPUNGE IF NOT LOGGED IN
HRLI T1,USRLH ;GET USER NUMBER
CALL CNVDIR ;CONVERT IT TO A DIRECTORY NUMBER
MOVE T2,T1 ;SET UP FOR DELDF
MOVX T1,DD%DTF ;DELETE TEMPORARY FILES
PUSH P,T2 ;SAVE DIR NUMBER
DELDF ;EXPUNGE LOGIN DIR
ERJMP .+1 ;DONT STOP ON ERRORS
CALL GTCSCD ;GET CONNECTED STRUCTURE,,DIRECTORY
POP P,T3 ;GET BACK DIR # FROM LAST DELDF
CAMN T1,T3 ;ARE THEY THE SAME?
JRST LOG0 ;YES, DO NO EXPUNGE AGAIN
MOVE T2,T1 ;GET DIR NUMBER INTO 2
MOVX T1,DD%DTF ;DELETE TEMPORARY FILES
DELDF ;EXPUNGE CONNECTED DIR
ERJMP .+1 ;DONT STOP ON ERRORS
LOG0: CALL LOGSTR ;GO DECREMENT MOUNT COUNT FOR ALL STR'S
; THIS JOB HAS MOUNTED
MOVNI 1,1 ;NOW RELEASE ALL ASSIGNED DEVICES
RELD
JFCL
MOVE 1,LOGDES
DOBE ;WAIT FOR LOG TTY INACTIVE
CALL LOGTOT ;SUMMARY TO LOG TTY
CALL LOGTUS ;Perform USAGE for logout
LOG1: HRRE 1,CTRLTT
JUMPL 1,LOG2 ;CONTROL TTY?
MOVEI 1,400000(1) ;YES, PRINT LOGOUT MESSAGE
RFMOD ;TURN OFF PAGE MODE
;**;[2874]Add one line at LOG1: +4L RWW 23-NOV-82
ERJMP .+1 ;[2874]ignore errors
TXZ 2,TT%PGM ;TO ALLOW THE MESSAGE TO COME OUT
STPAR
;**;[2874]Add one line at LOG1: +6L RWW 23-NOV-82
ERJMP .+1 ;[2874]ignore errors
;**;[3160]Add two lines at LOG1: +8L TAB 5-SEP-84
CFOBF ;[3160]FLUSH OUTPUT BUFFER
ERJMP .+1 ;[3160]
CALL LOGTOT
HRLOI T1,(TL%CRO+TL%COR+TL%SAB+TL%ABS)
SKIPGE T2,CTRLTT ;GET TTY
JRST LOG2 ;IF DETACHED
CAMN T2,CTYLNO ;Logging off CTY?
TXZ T1,TL%ABS ;Yes - set refuse links
MOVEI T2,-1
TLINK ;BREAK LINKS, SET ACCEPT
JFCL
REPEAT 1,<
MOVEI T4,^D15 ;WAIT FOR 15 SECONDS MAX
LOG21: HRRE T1,CTRLTT ;GET TTY #
JUMPL T1,LOG2 ;NONE
MOVEI T1,400000(1) ;GET DESIGNATOR
SOBE ;LOGOUT MESSAGE COMPLETE?
IFNSK.
MOVEI T1,^D1000 ;NO, WAIT A SECOND
DISMS
SOJG T4,LOG21 ;TRY AGAIN OR GIVE UP
ENDIF.
>
REPEAT 0,< ;ALTERNATE WAY OF DOING THIS
HRRE T1,CTRLTT ;GET TTY #
JUMPL T1,LOG2 ;NONE
MOVEI T1,400000(1) ;GET DESIGNATOR
DOBE ;WAIT FOR THE MESSAGE TO COMPLETE
>
DO.
SKIPGE T2,CTRLTT ;IF DETACHED, DON'T HANG UP
EXIT.
MOVE T1,JOBNO
HRRZ T1,JOBDIR(1)
IFE. T1 ;LOGGED IN?
SKIPN HNGU0F ;NO, HANGUP IN THIS CASE?
EXIT. ;NO
ELSE.
SKIPN HNGU1F ;YES, HANGUP IN THIS CASE?
EXIT. ;NO
ENDIF.
CALL TTHNGU ;HANG UP LINE
ENDDO.
;HERE IF NO CTY
LOG2: MOVEI T1,SPIDTB+.SPQSR ;GET PID ADDRESS
SKIPE SPIDTB+.SPQSR ;IS QUASAR RUNNING?
CALL LOGOMS ;YES, SEND IT A MESSAGE
JFCL
MOVEI T1,SPIDTB+.SPOPR ;GET ORION PID ADDRESS
SKIPE SPIDTB+.SPOPR ;RUNNING?
CALL LOGOMS ;YES, SEND IT A MESSAGE
JFCL
SKIPE T1,JSLOPD ;IS THERE A PID IN JSB FOR LGOUT MSG?
CALL LOGOMO ;YES. SEND THE LOGOUT MESSAGE TO CREATOR
JFCL
JRST HLTJB
LGOGOK: SAVET
HRRZ T1,JOBDIR(T1) ;DIRECTORY
JUMPE T1,R ;QUIT NOT LOGGED IN
HRLI T1,USRLH
CALL CNVDIR ;GET DIRECTORY NUMBER
GTDAL ;GET ALLOCATION
ERJMP R ;QUIT SOME ERROR
UMOVE T1,T1 ;GET ORIG ARGUMENT
GTOKM (.GOLGO,<T2,T3,T1>,[RETERR ()]) ;ASK PERMISSION
RET ;RETURN TO CALLER
;LOGSTR - ROUTINE TO DECREMENT MOUNT COUNT FOR ALL STRUCTURES THIS
; JOB HAS MOUNTED.
;
;CALL: CALL LOGSTR
;RETURNS: +1 ALWAYS
LOGSTR: SAVEP
LOCK JSSTLK ;LOCK THE JSB STRUCTURE INFO DATA
MOVSI P1,-STRN ;SET UP TO LOOP OVER STR INFO BLOCKS IN JSB
MOVEI P2,JSSTRT ;GET ADDRESS OF FIRST BLOCK TO LOOK AT
LGST10: JE <JSMCI,JSXCL>,(P2),LGST20 ;IF THIS JOB DIDN'T MOUNT THIS STR, CHECK NEXT
LOAD T1,JSSTN,(P2) ;GET UNIQUE CODE FOR THIS STRUCTURE
CALL CNVSTR ;GET STRUCTURE # AND LOCK THE STRUCTURE
JRST LGST20 ;FAILED, MUST ALREADY BE DISMOUNTED, GO ON
MOVEM T1,P3 ;SAVE STRUCTURE NUMBER
JN JSXCL,(P2),[ MOVX T1,D1%INI ;IF MOUNTED EXCLUSIVELY BY THIS JOB,
ANDCAM T1,DEVCH1+DVXST0(P3) ; MAKE STR GENERALLY AVAILABLE
JRST .+1]
JE JSMCI,(P2),LGST15 ;IF MOUNT COUNT NOT INCREMENTED, GO UNLOCK STR
MOVE T1,P3 ;GET STRUCTURE NUMBER AGAIN
MOVE T2,P2 ;GET ADDRESS OF STR INFO BLOCK IN JSB
MOVE T3,JOBNO ;GET JOB NUMBER
CALL DECMNT ;GO DECREMENT THE MOUNT COUNT FOR THIS STR
JFCL ;IGNORE FAILURE, GO ON
LGST15: MOVE T1,P3 ;RESTORE STRUCTURE NUMBER
CALL ULKSTR ;UNLOCK THE STRUCTURE NOW
LGST20: ADDI P2,JSSTMX ;GET ADDRESS OF NEXT STR INFO BLOCK IN JSB
AOBJN P1,LGST10 ;GO CHECK NEXT STR INFO BLOCK
UNLOCK JSSTLK ;DONE, UNLOCK THE JSB STR INFO LOCK
RET ;RETURN
;THE FOLLOWING IMPLEMENTS LOGOUT OF A JOB OTHER THAN SELF.
;LEGAL IF USER IS SC%WHL OR SC%OPR, OR IF OTHER JOB IS SAME USER
ELOGO: MOVE T2,JOBNO ;GIVEN JOB NUMBER TO LOGOUT
CAIN T2,0(T1) ;SELF?
RETERR(LOUTX1) ;YES, CAN'T SAY IT THAT WAY
JUMPE T1,[RETERR (LOUTX5)] ;CANNOT LOGOUT JOB 0
CAIGE T1,NJOBS ;REASONABLE NUMBER?
CAIG T1,0
RETERR(LOUTX2) ;NO
MOVE P1,T1 ; preserve target job number
CALL LGOGOK ;GETOK CHECK
NOSKED ; prevent races
SKIPGE JOBRT(P1) ;EXISTS?
RETERR(LOUTX2,OKSKED) ; no, fail
MOVE T1,P1 ; target job number
CALL SETJSB ; map its JSB
MOVE P2,T1 ; preserve JSB address
HRRZ T3,JOBDIR(P1) ;LOGIN DIRECTORY OF OBJECT JOB
MOVE T1,JOBNO ; our job number
XOR T3,JOBDIR(T1) ; our directory number
TRNN T3,-1 ;SAME AS THIS JOB?
JRST ELOGO1 ;YES, THAT'S OK
HLRE T1,JOBPT(P1) ;GET TTY OF THE JOB BEING LOGGED OUT
JUMPL T1,ELOGO3 ;JUMP IF DETACHED
CALL PTGETJ ;GET CONTROLLING JOB # IF TTY IS A PTY
JUMPL T1,ELOGO3 ;JUMP IF NOT A PTY JOB
CAMN T1,JOBNO ;JOB BEING CONTROLLED BY JOB DOING THE LGOUT
JRST ELOGO1 ;YES, SO DO IT
ELOGO3: HRRZ T3,JOBONT(P1) ;DO I OWN THAT JOB IN CRJOB SENSE?
CAMN T3,JOBNO ; ..
JRST ELOGO1 ;YES. OK TO LOG IT OUT.
MOVEI T3,SC%WHL+SC%OPR ;OTHERWISE MUST BE SC%WHL
TDNN T3,CAPENB
JRST [ CALL CLRJSB ; unmap the JSB
RETERR(LOUTX3,OKSKED)] ; quit
ELOGO1: SETOM JOBONT(P1) ;MAKE IT UNOWNED SO IT CAN LOG OUT
SETONE JSOLO,(P2) ;FLAG IN IT THAT SOMEONE LGOUT'ED IT
MOVE T1,JOBNO ;AND WHO IT WAS
MOVEM T1,JSLOJB(P2) ; ..
CALL CLRJSB ;LET GO OF THE JSB
MOVE T1,P1 ; target job number
CALL ELOGOO ;LOG OUT THE TARGET JOB
OKSKED
SMRETN ;AND DONE
;LOGGING FUNCTIONS
;TYPE LOGOUT MESSAGE, DESTINATION DESIGNATOR IN 1
LOGTOT::SKIPE 2,JSLOJB ;DID SOMEONE ELSE LOG OUT THIS JOB?
CALL LOGTOK ;YES - INFORM THE VICTIM
HRROI 2,[ASCIZ /Killed/]
CALLRET LOGUSD ;Log job and time used info, setup time for USAGE
; and return from LOGTOT
;SUBROUTINE TO TELL A VICTIM ABOUT WHO LOGGED OUT HIS JOB
LOGTOK: PUSH P,T2 ;SAVE JOB NUMBER OF MURDERER
HRROI T2,[ASCIZ /Killed by /]
PUSHJ P,LOGMES
MOVE T2,(P) ;GET KILLER BACK
HRRZ T2,JOBDIR(T2)
JUMPE T2,LOGTK1 ;SKIP THIS IF HE'S NOT LOGGED IN
HRLI T2,USRLH ;ELSE OUTPUT USER'S NAME
MOVE T3,T1 ;SAVE OUTPUT DESIGNATOR
DIRST
MOVE T1,T3 ;IF ERROR, RESTORE OUTPUT DESIGNATOR
LOGTK1: POP P,T2 ;GET JOB NUMBER
HLRZ T2,JOBPT(T2) ;GET CONTROLLING TERMINAL OF THAT JOB
JUMPL T2,LOGTK2 ;IF JOB IS DETACHED SKIP THIS
PUSH P,T2 ;ELSE SAVE TERMINAL NUMBER
HRROI T2,[ASCIZ /, TTY /]
PUSHJ P,LOGMES
POP P,T2 ;GET TERMINAL NUMBER AGAIN
MOVEI T3,^D8 ;PRINT IT IN OCTAL
PUSHJ P,LGNOUT
LOGTK2: CALLRET LOGCR ;OUTPUT A CRLF AND RETURN
;Perform USAGE for logout
LOGTUS: MOVEI T1,.USLGO ;LOGOUT FUNCTION
MOVEI T2,LOGLST
USAGE ;USAGE JSYS
ERCAL XUSAGE ;REPORT FAILURE
RET ;Return from LOGTUS
;LOGON MESSAGE, CALLED FROM .LOGIN
LOGONM::SKIPL 1,LOGDES
DOBE ;WAIT FOR OTHER USE OF TTY TO FINISH
HRROI 2,[ASCIZ /Login/]
CALL LOGMES
MOVE T2,CTRLTT ;T2/ LINE NUMBER
CALL LOGJOB
PUSH P,1
MOVEI T1,.USLGI ;LOGIN FUNCTION
MOVEI T2,LOGLST ;POINT TO PARAMETERS
USAGE
ERCAL XUSAGE ;REPORT USAGE FAILURE
POP P,1
CALLRET LOGCR ;AND CRLF
XUSAGE: BUG (UXXFAI)
RET ;CONTINUE
;PARAMETER BLOCK FOR LOGIN/LOGOUT/SESSION CHANGE CALLS
LOGLST: USENT. (.UTSEN,1,1) ;SESSION ENTRY TYPE
USRTM. (JBRUNT) ;RUN-TIME
USACT. (<-1,,ACCTSR>) ;ACCOUNT
USSST. (CTIMON) ;SESSION START DATE/TIME
USJTY. (-1) ;BATCH T/S FLAG
USBJN. (JBBNAM) ;BATCH JOB NAME
USBSN. (JBBSEQ) ;BATCH SEQ NUMBER
USCOM. (<-1,,JSSRM+1>) ;SESSION REMARK
USCCT. (CONCON) ;CONSOLE CONNECT TIME
USPNM. (<SIXBIT "MONITR">,US%IMM)
USPVR. ([EXP SVNM]) ;MONITOR NAME AND VERSION
USNM2. (<-1,,USRNAM+1>) ;USER NAME
0 ;END OF LIST
;CHANGED ACCOUNT NUMBER MESSAGE
LOGCJM::SKIPL 1,LOGDES
DOBE
HRROI 2,[ASCIZ /Changed/]
CALL LOGUSD ;Log job and time used, setup for time for USAGE
;**;[3078] Add label at LOGCJM+4L DEE 1-MAR-84
LOGUSG: MOVE T2,JBRUNT ;Get session runtime
ADDM T2,JSSRTM ;Update session runtime start for next session
MOVE T2,CONCON ;Get session connect time
ADDM T2,JSSCTM ;Update session console time start
PUSH P,1 ;SAVE OUTPUT DESIGNATOR
MOVEI T1,.USSEN ;SESSION ENTRY CODE
MOVEI T2,LOGLST ;PARAMS
USAGE
ERCAL XUSAGE
POP P,1 ;RESTORE
RET ;Return from LOGCJM
;Print job info, time used, and setup times for USAGE
LOGUSD: CALL LOGMES ;Print message type
MOVE T2,CTRLTT ;Get controlling terminal number
CALL LOGJOB ;Type job and terminal info
;**;[3078] Add label at LOGUSD+3L DEE 1-MAR-84
LOGUS1: HRROI T2,[ASCIZ /, Used /]
CALL LOGMES ; . . .
MOVE T2,JOBNO ;Get this job's number
MOVE T2,JOBRT(T2) ;Get runtime of job
MOVE T3,T2 ;Copy it again
SUB T3,JSSRTM ;Compute session runtime
MOVEM T3,JBRUNT ;Save for USAGE
CALL LOGTIM ;Print runtime
HRROI T2,[ASCIZ / in /]
CALL LOGMES ; . . .
MOVE T2,TODCLK ;Get current uptime
SUB T2,CONSTO ;Compute console time logged in
MOVE T3,T2 ;Copy console time
SUB T3,JSSCTM ;Compute console time this session
MOVEM T3,CONCON ;Save console time for USAGE
CALL LOGTIM ;Print console time
SKIPN JSSRTM ;Session start
SKIPE JSSCTM ; at beginning of job?
SKIPA ;No-- print time this session
JRST LOGUS2 ;Yes-- don't repeat ourselves
HRROI T2,[ASCIZ /,
Used this session /]
CALL LOGMES ; . . .
MOVE T2,JBRUNT ;Get session time
CALL LOGTIM ;Print it
HRROI T2,[ASCIZ / in /]
CALL LOGMES ; . . .
MOVE T2,CONCON ;Get console time this session
CALL LOGTIM ;Print it
LOGUS2:
CALLRET LOGCR ;Finish with CRLF
;PRINT TIME FROM 2
LOGTIM: JUMPL 1,R
IDIVI 2,^D1000 ;MS TO SECS
IDIVI 2,^D60 ;PEEL OFF SECONDS
PUSH P,3
IDIVI 2,^D60 ;PEEL OFF MINUTES
PUSH P,3
CALL LOGNUM ;PRINT HOURS
MOVEI 2,":"
BOUT
POP P,2
CALL LOG2NM ;PRINT MINUTES
MOVEI 2,":"
BOUT
POP P,2
CALL LOG2NM ;PRINT SECONDS
RET
;ATACH AND DETACH MESSAGES
;DETMSG - RECORD DETACHING OF JOB
;ACCEPTS:
; T2/ LINE NUMBER
DETMSG: STKVAR <DETMLN>
MOVEM T2,DETMLN ;SAVE LINE NUMBER
HRROI 2,[ASCIZ /Detached/] ;WORD FOR LOG TTY
SKIPL 1,LOGDES
DOBE
CALL LOGMES
MOVE T2,DETMLN ;T2/ LINE NUMBER
CALL LOGJOB
;**;[3078] At DETMS0-1L replace 1 line with 2 DEE 1-MAR-84
;*** DETACH ***
CALL LOGUS1 ;[3078] PRINT JOB INFO; SET UP FOR USAGE
CALLRET LOGUSG ;[3078] SET UP AND WRITE A USAGE RECORD
DETMS0: ASUBR <ATAJN,ATALN> ;JOB # , LINE #
HRROI 2,[ASCIZ /Detached job /]
SKIPL 1,LOGDES
DOBE
CALL LOGMES
MOVE 2,ATAJN ;GET REMOTE JOB NUMBER
CALL LOGNUM
HRROI 2,[ASCIZ / from TTY /]
JRST ATAMS3
ATAMSG: ASUBR <ATAJN,ATALN> ;JOB # , LINE #
SKIPL 1,LOGDES
DOBE
HRROI 2,[ASCIZ /Attached job /]
CALL LOGMES
MOVE T2,ATAJN ;GET JOB NUMBER
CALL LOGNUM ;PRINT IT
HRROI 2,[ASCIZ / to TTY /]
ATAMS3: CALL LOGMES
MOVE T2,ATALN ;LINE NUMBER
MOVEI 3,^D8 ;PRINT IN OCTAL
CALL LGNOUT
CALL LOGJ2 ;PRINT AND STORE TOD
;*** ATTACH ***
;**;[3078] At ATAMS3+5 Replace 1 line with 2 DEE 1-MAR-84
CALL LOGUS1 ;[3078] PRINT JOB INFO; SET UP FOR USAGE
CALLRET LOGUSG ;[3078] SET UP & WRITE A USAGE RECORD
;PRINTS JOB 1, TTY 40, AT 12:34:56
; OR JOB 1, DETACHED, AT 12:34:56
;ACCEPTS:
; T2/ LINE NUMBER
LOGJOB: STKVAR <LOGJLN>
MOVEM T2,LOGJLN ;T2/ LINE NUMBER
HRROI 2,[ASCIZ / Job /]
CALL LOGMES
MOVE 2,JOBNO
CALL LOGNUM
MOVE 2,JOBNO
HRRZ 2,JOBDIR(2)
JUMPE 2,LOGJ3 ;LOGGED IN NOW?
HRROI 2,[ASCIZ /, User /]
CALL LOGMES
MOVE 2,JOBNO
HRRZ 2,JOBDIR(2)
HRLI 2,USRLH ;TURN IT INTO A 36 BIT USER NUMBER
MOVE 3,1 ;SAVE OUTPUT DESIGNATOR
CAIL 1,0
DIRST ;DIRECTORY NAME
MOVE 1,3 ;IF ERROR, RESTORE OUTPUT DESIGNATOR
HRROI 2,[ASCIZ /, Account /]
CALL LOGMES
CALL LOGACC
LOGJ3: MOVE 2,LOGJLN
JUMPL 2,LOGJ1 ;IF NO CTRL TTY (DETACHED JOB)
HRROI 2,[ASCIZ /, TTY /]
CALL LOGMES
MOVE 2,LOGJLN
MOVEI 3,^D8 ;PRINT TTY NUMBER IN OCTAL
CALL LGNOUT
LOGJ2: HRROI 2,[ASCIZ /,
at /]
CALL LOGMES
PUSH P,1 ;SAVE DESIGNATOR
CALL LGTAD ;DO LOCAL GTAD
MOVE 2,1
POP P,1 ;RESTORE DESTINATION
JUMPL 1,R
SETZ 3, ;STANDARD DATE AND TIME
CAIL 2,0
ODTIM
RET
LOGJ1: HRROI 2,[ASCIZ /, Detached/]
CALL LOGMES
JRST LOGJ2
LOGACC: HRROI T2,ACCTSR ;POINT TO STRING
MOVEI T3,0 ;TERMINATE ON NULL
CAIL T1,0 ;VALID PNTR
SOUT ;YES - OUTPUT STRING
RET ;RETURN
LOGMES: SETZ 3,
SOUT
RET
LOG2NM: SKIPA 3,[EXP NO%LFL!NO%ZRO+^D2B17+^D10] ;Decimal, two digits
LOGNUM: MOVEI 3,^D10 ;DECIMAL FOR TIMES, ETC.
LGNOUT: NOUT
JFCL
RET
LOGCR: HRROI 2,[ASCIZ /
/]
SETZ 3,
SOUT
RET
;PRINTS [JOB N DETACHED BY NAME] TO TTY OF JOB BEING ATTACHED
; OR UNATTACHED.
;ACCEPTS: 1/JOB # OF JOB BEING UNATTACHED
; 2/LINE # OF JOB BEING UNATTACHED
; 3/DIR # OF USER UNATTACHING THE JOB
; 4/TTY # OF USER UNATTACHING THE JOB
DETMS1: TRVAR <<MSGBUF,25>,JOB,LINE,DIRN,DTTYN,TMPPTR>
MOVEM 1,JOB ;SAVE INPUTS
MOVEM 2,LINE
MOVEM 3,DIRN
MOVEM 4,DTTYN ;SAVE TTY # OF DETACHER
HRROI 1,MSGBUF ;START FILLING BUFFER
CALL LOGCR ;CRLF
HRROI 2,[ASCIZ/[Job /]
CALL LOGMES
HRRZ 2,JOB ;JOB # TO BE PRINTED
CALL LOGNUM
HRROI 2,[ASCIZ/ detached by /]
CALL LOGMES
MOVE 2,DIRN
MOVEM 1,TMPPTR ;SAVE PLACE IN BUFFER IN CASE DIRST FAILS
DIRST ;GET USER WHO'S UNATTACHING THE JOB
ERJMP DIRFIX
DETMS2: SKIPGE DTTYN ;IS DETACHER ON A TTY?
JRST DETMS3 ;NO
HRROI 2,[ASCIZ/ on terminal /]
CALL LOGMES
MOVE 2,DTTYN ;Get the TTY number
MOVEI 3,10 ;OCTAL NUMBER
CALL LGNOUT
DETMS3: HRROI 2,[ASCIZ/]/]
CALL LOGMES
CALL LOGCR ;CLOSE WITH CRLF
MOVEI 1,.TTDES ;MAKE A TTY DESIGNATOR
ADD 1,LINE ;TTY LINE NUMBER
HRROI 2,MSGBUF ;POINT TO NOW-COMPLETED MESSAGE
TTMSG ;SEND IT OUT
;**;[3034] Add 1 line at DETMS3+7 RAH OCT 27 83
ERJMP .+1 ;[3034]
RET
;UNATTACHER NOT LOGGED IN
DIRFIX: MOVE 1,TMPPTR ;RESTORE BUFFER POINTER
HRROI 2,[ASCIZ/user/]
CALL LOGMES ;PLACE PSEUDO-NAME IN BUFFER
JRST DETMS2 ;FINISH ASSEMBLING THE MESSAGE
;INFO JSYS'S
.GJINF::MCENT
CALL GTCSCD ;GET CONNECTED STRUCTURE CODE,,DIRECTORY
MOVE 2,1 ;RETURN CONNECTED STR/DIR NUMBER
MOVE 3,JOBNO
HRRZ 1,JOBDIR(3)
SKIPE 1 ;IF NOT LOGGED IN, RETURN 0
HRLI 1,USRLH ;TURN THIS INTO A 36 BIT USER NUMBER
MOVE 4,CTRLTT
MR4: UMOVEM 4,4
MR3: UMOVEM 3,3
MR2: UMOVEM 2,2
MR1: UMOVEM 1,1
JRST MRETN
.TIME:: MCENT
MOVE 1,TODCLK ;TIME SINCE SYSTEM STARTED
MOVEI 2,^D1000 ;DIVISOR FOR SECONDS
JRST MR2 ;RETURN 2 AC'S
.RUNTM::MCENT
NOSKED
CALL UCLOCK ;UPDATE CLOCKS
OKSKED
CALL FLOCK ;LOCK THE FORK STRUCTURE
XCTU [HRRZ 1,1] ;FORK HANDLE
CAIN 1,-5 ;WHOLE JOB?
JRST RUNTM1 ;YES
CALL SETJFK
CALL SETLF1
MOVE 1,FKRT(1) ;FORK RUN TIME FROM PSB
JRST RUNTM2
RUNTM1: NOINT
MOVE 1,JOBNO
MOVE 1,JOBRT(1)
RUNTM2: MOVE 3,TODCLK ;CURRENT TIME
SUB 3,CONSTO ;LESS TIME ON, FOR CONSOLE TIME USED
MOVEI 2,^D1000 ;MILLISECONDS
RETA3: UMOVEM 1,1 ;RETURN VALUES IN 1,2,3
UMOVEM 2,2
UMOVEM 3,3
JRST CLFRET
.GTRPI::MCENT
CALL FLOCK ;LOCK THE FORK STRUCTURE
CALL SETLFK
MOVE 2,USWPCT(1)
MOVE 3,PTTIM(1)
IDIVI 3,^D100 ;RETURN MILLISEC, NOT HPTIM UNITS
MOVE 1,UTRPCT(1)
JRST RETA3
;GET DIRECTORY ALLOCATION
;ACCEPTS IN 1/ DIR # OR -1 FOR CONNECTED DIR
; GTDAL
;RETURNS +1: 1/ LOGGED IN QUOTA
; 2/ CURRENT ALLOCATION
; 3/ LOGGED OUT QUOTA
.GTDAL::MCENT
UMOVE T1,1 ;GET DIR #
CAMN T1,[-1] ;-1 MEANS CONNECTED DIRECTORY
CALL GTCSCD ;GET CONNECTED DIR NUMBER
CALL IGTDAL ;USE INTERNAL ROUTINE
ITERR() ;FAILED
JRST MR3 ;RETURN 1, 2 AND 3
;INTERNAL GTDAL, 1/ DIRECTORY #
IGTDAL::STKVAR <IGTDN>
MOVEM T1,IGTDN ;SAVE DIR #
CALL SETDIR ;MAP THE DIRECTORY IN
RETBAD () ;FAILED
HRRZ T1,IGTDN ;DIRECTORY NUMBER
LOAD T2,CURSTR ;STRUCTURE NUMBER
CALL GETCAL ;GET CURRENT ALLOCATION
JRST [ MOVE T3,DIRORA ;DIR NOT OPENED
LOAD T1,DRLIQ,(T3) ;LOGGED IN QUOTA
LOAD T2,DRDCA,(T3) ;CURRENT ALLOCATION
LOAD T3,DRLOQ,(T3) ;LOGGED OUT QUOTA
JRST IGTDX] ;EXIT
MOVE T3,DIRORA ;GET BASE ADR OF MAPPED DIR
MOVN T2,T1 ;NEGATE PAGES LEFT
LOAD T1,DRLIQ,(T3) ;GET LOGGED IN QUOTA
ADD T2,T1 ;ACTUAL USED
LOAD T3,DRLOQ,(T3) ;GET LOGGED OUT QUOTA
IGTDX: CALL USTDIR ;UNLOCK THE DIR
RETSKP ;GOOD RETURN
;HIGH PRECISION TIME JSYS
;MADE RESIDENT FOR SPEED
RESCD
.HPTIM::MCENT
CAIL 1,0 ;CHECK RANGE OF ARG
CAIL 1,NHPTIM
RETERR(HPTX1) ;UNDEFINED CLOCK
JRST HPTTAB(1)
HPTTAB: JRST HPT0 ;ELAPSED TIME
JRST HPT1 ;FORK RUNTIME
NHPTIM==.-HPTTAB
HPT0: NOSKED
JSP 4,MTIME ;READ TODCLK IN 1E-5 SECOND UNITS
OKSKED
UMOVEM 1,1
SMRETN
HPT1: NOSKED
CALL UCLOCK ;UPDATE USER RUNTIMES
OKSKED
MOVE 1,FKRT ;GET MILLISECOND PART
IMULI 1,NTMS ;CONVERT TO HP UNITS
ADD 1,RUNT2 ;INCLUDE FRACTION OF MILLISECOND
UMOVEM 1,1
SMRETN
SWAPCD
;GET NUMBER OF TABLE AND FIRST WORD GIVEN SIXBIT SYMBOL
; 1/ SIXBIT 'TABLENAME'
; SYSGT
; RETURN +1 ALWAYS,
; 1/ -LENGTH,,TABLENUMBER OR 0
.SYSGT::MCENT
MOVSI 4,-GTBSIZ
CAMN 1,SYMTAB(4)
JRST SYSGT1
AOBJN 4,.-2
XCTU [SETZM 2] ;NOT FOUND RETURN 0
JRST MRETN
SYSGT1: HLRZ 2,GTTAB(4) ;SIZE
MOVN 2,2 ;NEGATE IT
HRLI 4,0(2) ;COMBINE WITH TABLE NUMBER
UMOVEM 4,2 ;GIVE TO USER
HRRZ T3,T4 ;GET TABLE NUMBER
SETZ T2, ;GET OFFSET ZERO
XCT GTGET(T3) ;GO GET THE FIRST ENTRY
UMOVEM 1,1 ;GIVE FIRST WORD TO USER
JRST MRETN
;GET TABLE ENTRY
; 1/ INDEX,,TABLENUMBER
; GETAB
; RETURN +1: ERROR
; RETURN +2: 1/ DATA
.GETAB::MCENT
MOVSI 2,(1B1)
TDNN 2,CAPMSK ;GETAB CAPABILITY EXISTS?
RETERR(GTABX3) ;NO
HLRZ 2,1 ;INDEX OR -1
MOVEI 3,0(1) ;TABLE NUMBER
CAIL 3,GTBSIZ ;LEGAL NUMBER?
RETERR(GTABX1) ;NO
HLRZ 1,GTTAB(3) ;GET SIZE OF TABLE
CAIN 2,-1 ;INDEX OF -1?
JRST RETN1 ;YES, RETURN NEG OF TABLE SIZE
CAIL 2,0(1) ;INDEX WITHIN BOUNDS?
RETERR(GTABX2)
XCT GTGET(T3) ;GET WORD
UMOVEM 1,1 ;RETURN IT TO USER
SMRETN
RETN1: XCTU [MOVNM 1,1] ;RETURN NEG OF LENGTH
SMRETN
;TABLES FOR GTTAB
;ALL TABLES DEFINED WITH FOLLOWING MACRO WHICH TAKES NAME OF
;ANOTHER MACRO TO CALL FOR EACH TABLE.
;*NOTE* TABLE INDICES ARE DEFINED IN MONSYM - ORDER AND PLACE
;MUST BE PRESERVED IF TABLES ARE ADDED OR DELETED. PLACE
;MAY BE HELD BY CALL WITH NO ARGS.
;THE ARGUMENT TO GTABS IS A MACRO TO BE CALLED FOR EACH TABLE.
;FIVE ARGUMENTS ARE GIVEN, SIXBIT TABLE NAME, LOCATION, LENGTH, ROUTINE,
;SYMBOLIC VALUE FOR TABLE NUMBER (FROM MONSYM)
DEFINE GTABS (XXX)<
XXX JOBTTY,JOBPT,NJOBS
XXX JOBRT,JOBRT,NJOBS
XXX TICKPS,[^D1000],1
XXX ;;FORMERLY JOBDIR
XXX TTYJOB,0,NLINES,GTBTTF
XXX NCPGS,TOTRC,1
XXX DEVNAM,DEVNAM,NDEV
XXX DEVCHR,DEVCHR,NDEV
XXX DEVUNT,DEVUNT,NDEV
XXX DSKERR,DSKRCE,NDSKEW
XXX DRMERR,DRMCFE,NDRMEW
XXX SYSVER,SVN,NSVNT
XXX SYSTAT,SKDTM0,NSTAT
XXX QTIMES,QSUM,NQUEUE
XXX JOBNAM,JOBNAM,NJOBS
XXX SNAMES,SNAMES,NNAMES
XXX STIMES,STIMES,NNAMES
XXX SPFLTS,SPFLTS,NNAMES
XXX SSIZE,SSIZE,NNAMES
XXX SNBLKS,SNBLKS,NNAMES
XXX DBUGSW,DBUGSW,2
XXX LOGDES,LOGDES,2
XXX PTYPAR,0,1,GTBPTY
XXX SYMTAB,SYMTAB,GTBSIZ
XXX DWNTIM,HSYST1,NHSYST
XXX JOBPNM,JOBPNM,NJOBS
XXX BLDTD,SYSTAD,1
XXX ;;FORMERLY LSTDRN
XXX APRID,APRSER,1
XXX HQLAV,HQLAV,NRJAVS
XXX LQLAV,LQLAV,NRJAVS
XXX NETRDY,IMPRDY,IMPGTN ;ARPANET
;THE FOLLOWING TWO TABLES ARE LEFT FOR COMPATABILITY REASONS ONLY
;THEY RETURN HOST STATUS BY THE OLD-STYLE 8 BIT HOST NUMBER
XXX IMPHRT,0,IMPLBT,GTBHRT ;ARPANET
XXX HSTSTS,0,NHSTST,GTBHSS ;ARPANET
XXX HSTNAM,HSTNAM,NHSTN ;ARPANET
;SIMULATE GHOSTN AND NETAWD
XXX HOSTN,0,NHOSTS,GHOSTN ;ARPANET
XXX NETLSK,LSKT,NSKT ;ARPANET
XXX NETFSK,FSKT,NSKT ;ARPANET
XXX NETAWD,0,NSKT,GNTAWD ;ARPANET
XXX NETBAL,NETBAL,NSKT ;ARPANET
XXX NETSTS,NETSTS,NSKT ;ARPANET
XXX NETBUF,NETBUF,NSKT ;ARPANET
XXX NETBTC,NETBTC,NSKT ;ARPANET
XXX IMPLT1,IMPLT1,IMPNLK,,.IMPL1 ;ARPANET
XXX IMPLT2,IMPLT2,IMPNLK,,.IMPL2 ;ARPANET
XXX IMPLT3,IMPLT3,IMPNLK,,.IMPL3 ;ARPANET
XXX IMPLT4,IMPLT4,IMPNLK,,.IMPL4 ;ARPANET
XXX LHOSTN,NOHOST,2 ;ARPA HOST NUMBER, NVT COUNTER
XXX JBONT,JOBONT,NJOBS ;OWNING JOB
XXX NSWPGS,NSWPGS,1 ;DEFAULT SWAPPING PAGES
XXX SCOUNT,SCOUNT,NNAMES ;COUNT OF SETSN'S S FOR SUBSYSTEM
>
;ASSEMBLE SYMBOL TABLE
DEFINE SYMT (NAM,LOC,SIZ,ROUT,VALUE)<
IFB <NAM>,<0> ;;LEAVE 0 IF PLACE RESERVED
IFNB <NAM>,<
IFB <VALUE>,< ;;IF VALUE WAS NOT SPECIFIED
..X==.'NAM ;;GET NAME FROM MONSYM
.'NAM::!SIXBIT /NAM/> ;;CHECK TABLE INDEX, ASSEMBLE SIXBIT
IFNB <VALUE>,< ;;IF VALUE WAS SPECIFIED
..X==VALUE ;;GET NAME FROM MONSYM
VALUE::!SIXBIT /NAM/>>> ;;CHECK TABLE INDEX, ASSEMBLE SIXBIT
SYMTAB::!PHASE 0 ;;MAKE TAGS BE RELATIVE TO 0
GTABS SYMT ;;ASSEMBLE SYMTAB, CHECK INDEX MNEMONICS
GTBSIZ::DEPHASE
;ASSEMBLE POINTERS AND SIZES
DEFINE LOCT (NAM,LOC,SIZ,ROUT,VALUE)<
IFB <NAM>,<0> ;;LEAVE 0 IF PLACE RESERVED
IFNB <NAM>,<
XWD SIZ,LOC>>
GTTAB:: GTABS LOCT
;DEFINE PROCESSING ROUTINE
DEFINE ACTR (NAM,LOC,SIZ,ROUT,VALUE)<
IFB <NAM>, <SETZM T1> ;;NULL TABLE GIVES NULL ANSWER
IFNB <NAM>,< IFB <ROUT>, <CALL GTGETR> ;;DFAULT PROCESSOR
IFNB <ROUT>, <CALL ROUT> ;;DO SPECIFIED PROCESS
>
>
GTGET: GTABS ACTR ;DEFINE PROCESSING TABLES
;GENERAL GETTAB ROUTINE.
; 3/ TABLE NUMBER
; 2/ TABLE OFFSET
;RETURNS: +1 WITH T1/ ANSWER
GTGETR: ADD T2,GTTAB(T3) ;GET TABLE BASE
HRRZS T2 ;CLEAR INDEX
MOVE T1,0(T2) ;FETCH TABLE ENTRY
RET ;AND DONE
;SUBSYSTEM STATISTICS LOGIC
; 1/ SIXBIT NAME OF SYSTEM PROGRAM BEING RUN OR (PRIV)
; 2/ SIXBIT NAME OF PROGRAM
; SETSN
; RETURN +1: ALWAYS, NAME SET IN STATISTICS TABLE
.SETSN::MCENT
NOINT
MOVE 3,JOBNO
MOVEM 2,JOBPNM(3) ;SET JOB PROGRAM NAME
AOSE SNMLCK ;LOCK TABLE
CBLK1 ;OR WAIT TILL LOCKABLE
HRLZ 3,SNMPT ;NEG COUNT OF ENTRIES
CAMN 1,SNAMES(3) ;DESIRED NAME?
JRST SNM1 ;YES
AOBJN 3,.-2 ;NO, LOOKED AT ALL?
MOVEI 3,0(3)
CAIL 3,NNAMES-1 ;TABLE NOW FULL?
SKIPA 1,[SIXBIT /.OTHER/] ;YES, USE CATCH-ALL NAME
JRST [ SETZM SCOUNT(3) ;ZERO THE COUNT
SOS SNMPT ;UPDATE POINTER
JRST .+1] ;CONTINUE WITH FLOW
MOVEM 1,SNAMES(3) ;ADD NAME TO TABLE
SNM1: MOVE 2,JOBNO
HRRM 3,JOBNAM(2) ;PUT INDEX IN JOB TABLE
AOS SCOUNT(3) ;BUMP THE SETSN COUNT
SETOM SNMLCK ;UNLOCK TABLE
OKINT
SMRETN
NR SNMPT,1 ;NEG COUNT OF ENTRIES IN SNAMES
NR SNMLCK,1 ;LOCK FOR SNAMES TABLE
;PROGRAM NAME LOGIC
;SET NAME
; 1/ SIXBIT NAME OF PROGRAM
; SETNM
; RETURN +1: ALWAYS, NAME SET AS PROGRAM NAME FOR JOB
.SETNM::MCENT
MOVE 3,JOBNO ;GET THIS JOB NUMBER
MOVEM 1,JOBPNM(3) ;SET THE NAME
JRST MRETN
;GET NAME
; GETNM
; RETURN +1: ALWAYS, 1/ SIXBIT NAME OF PROGRAM
.GETNM::MCENT
MOVE 1,JOBNO
MOVE 1,JOBPNM(1)
JRST MR1 ;RETURN 1 AC
;GETNAM -- SUBROUTINE TO CONSTRUCT VERSION AND SYSTEM NAME FROM TEXT
; IN THE FILE SYSTEM:MONNAM.TXT, OR IF THE FILE DOES NOT EXIST,
; TO USE THE DEFAULT TEXT ASSEMBLED INTO THE MONITOR IN THE BLOCK
; LABLED TSVN. THE FORMAT OF THE RESULTING TEXT IS:
; V D.DD.DD <TEXT>
; WHERE THE FIRST SEVERAL CHARACTERS IDENTIFY THE MONITOR VERSION AND ALWAYS
; COME FROM THE PREASSEMBLED STRING; AND THE <TEXT> COMES EITHER FROM
; THE FILE OR FROM THE PREASSEMBLED STRING. THE ENTIRE STRING MAY
; BE UP TO 132(10) CHARACTERS LONG, SO <TEXT> MAY BE 122(10),
; OR 172(8) CHARACTERS LONG. <TEXT> IN THE FILE SHOULD BE TERMINATED BY
; EOL.
GETNAM: STKVAR <A1> ;RESERVE SPACE FOR ONE TEMP
MOVE T1,[POINT 7,SVN] ;BYTE POINTER TO DESTINATION
MOVEM T1,A1 ;SAVE UPDATED PTR. TO DEST. STRING
MOVX T1,GJ%SHT!GJ%OLD ;FLAG FOR SHORT GTJFN CALL AND OLD FILE ONLY
HRROI T2,[ASCIZ /SYSTEM:MONNAM.TXT/] ;IMPLICIT STRING PTR TO FILE NAME
GTJFN ;IS THERE A FILE?
JRST GETNA1 ;NO FILE - DOESN'T MATTER WHY
MOVX T2,<OF%RD+FLD(7,OF%BSZ)> ;FILE EXISTS, SET UP OPENF CALL
OPENF ; ..
JRST GETNA1 ;UNSUCCESFUL FOR ANY REASON, USE
; DEFAULT STRING
MOVEI T3,<NSVNT-VTSVNT>*5-1 ;MAX. # OF BYTES WE CAN MOVE
MOVE T4,A1 ;RECALL BYTE PTR TO BUFFER
GETNA2: BIN ;GET NEXT CHARACTER FROM FILE
CAIE T2,.CHCRT ;IS IT A CARRIAGE RETURN?
CAIN T2,.CHLFD ;NO, IS IT A LINE FEED?
JRST GETNA3 ;A CR OR A LF WAS ENCOUNTERED
JUMPE T2,GETNA3 ;JUMP ALSO IF IT'S A NULL
IDPB T2,T4 ;IT'S A GOOD CHARACTER, PUT INTO BUFFER
SOJG T3,GETNA2 ;JUMP IF WE HAVN'T EXHAUSTED ALL BUT
; ONE BYTE POSITION IN BUFFER.
;MANUAL MERGE OF 1B CHANGES
GETNA3: CLOSF ;YES, CLOSE FILE, RELEASE JFN
JFCL ;IGNORE FAILURE
MOVE T1,T4 ;GET STRING POINTER AGAIN
HRROI T2,VTSVN ;IMPLICIT STRING POINTER TO VERSION
SETZ T3, ;STOP ON A NULL
SOUT ;MOVE PREASSEMBLED VERSION TO BUFFER
RET ;EXIT
GETNA1: HRROI T1,SVN ;IMPLICIT BYTE POINTER OF DESTINATION
HRROI T2,TSVN ;IMPLICIT BYTE POINTER TO PREASSEMBLED
; MONITOR NAME
GETNA5: SETZ T3, ;SPECIFY TERMINATION ON A NULL
SOUT ;MOVE PREASSEMBLED STRING TO BUFFER
; THE MOVE INCLUDED A TERMINATING NULL
RET ; SO -- WE'RE DONE
;GET JOB INFORMATION
; 1/ JOB #, OR -1 FOR SELF, OR TTY # + 400000
; 2/ -N,,USER ADR
; 3/ FIRST ENTRY DESIRED
; GETJI
; RETURN +1: FAILURE
; RETURN +2: SUCCESS, ENTRIES STORED IN USER ARRAY
;REQUIRES GETAB CAPABILITY IF JOB OTHER THAN SELF
.GETJI::MCENT
UMOVE P2,3 ;GET NUMBER OF FIRST ENTRY DESIRED
HRL P2,P2 ;DUPLICATE IN BOTH HAVLES
JUMPL P2,[RETERR (GTJIX1)] ;INSURE NOT NEGATIVE
ADD P2,[-NGTJIT,,0] ;SETUP AOBJN PTR TO FIRST ENTRY
JUMPGE P2,[RETERR (GTJIX1)] ;ALREADY BEYOND END OF TABLE
UMOVE P3,2 ;GET USER 'S ADR POINTER
CAMN 1,[-1] ;SELF?
JRST [ MOVE 1,JOBNO ;YES, GET THIS JOB NUMBER
JRST GETJI5] ;SKIP CAPABILITY CHECK
MOVX 2,SC%GTB
TDNN 2,CAPMSK ;HAS GETAB CAPABILITY?
RETERR (GTABX3) ;NO
TRZE 1,400000 ;TTY DESIGNATOR?
JRST [ CAIL 1,0 ;YES, LEGAL LINE NUMBER?
CAIL 1,NLINES
RETERR (GTJIX2) ;NO
MOVE T2,T1 ;T2/ LINE NUMBER
CALL GTCJOB ;GET OWNING JOB NUMBER
JRST GETJI6 ;JUMP IF NOT ACTIVE
CAIN T3,-1 ;IS THERE AN OWNING JOB?
JRST GETJI6 ;NO.
MOVE T2,T3 ;YES. PRESERVE JOB NUMBER
HLRZ T3,JOBPT(T2) ;GET CONTROLLING TTY FOR JOB
CAME 3,1 ;SAME AS GIVEN TTY?
JRST GETJI1 ;NO, TTY IS ASSIGNED NOT CONTROLLING
MOVE 1,2 ;SETUP JOB NUMBER
JRST .+1] ;CONTINUE WITH JOB NUMBER
CAIL 1,0 ;LEGAL JOB NUMBER?
CAIL 1,NJOBS
RETERR (GTJIX3) ;NO
GETJI5: NOSKED ;DON'T ALLOW JOB TO LOG OUT
SKIPGE JOBRT(T1) ;JOB EXISTS?
RETERR (GTJIX4,<OKSKED>) ;NO. GIVE APPROPRIATE ERROR
MOVEM 1,P1 ;SAVE JOB NUMBER
CALL SETJSB ;MAP IN JSB OF OBJECT JOB
OKSKED ;OK TO ALLOW SCHEDULING. JOB CAN'T LOGOUT
; SINCE ITS JSB IS MAPPED
MOVEM T1,P4 ;SAVE JSB OFFSET
GETJI2: XCT GETJIT(P2) ;GET ITEM
UMOVEM 1,0(P3) ;GIVE IT TO USER (ROUTINES THAT SKIP HAVE ALREADY DONE THIS)
AOBJP P3,GETJI3 ;COUNT USER'S COUNT AND ADR
AOBJN P2,GETJI2 ;COUNT OUR COUNT AND ADR
GETJI3: CALL CLRJSB ;UNMAP JSB OF OBJECT JOB
GETJIX: UMOVEM P3,2 ;UPDATE USERS PTR
SMRETN
;GETJI...
;HERE IF TTY GIVEN AND NO CONTROLLING JOB
;GETJI6 - NO JOB OWNS THIS TERMINAL; GETJI1 - A JOB OWNS THIS TERMINAL
;BUT IT IS NOT THE JOB'S CONTROLLING TERMINAL
GETJI6: SETOM T2 ;INDICATE NO OWNING JOB
SKIPA
GETJI1: TLO 2,(1B1) ;SAY ASSIGNED
GETJI4: XCTU [SKIPE 3] ;DOES USER WANT FIRST ENTRY?
JRST GETJIX ;NO, NOTHING TO DO
UMOVEM 2,0(P3) ;YES, STORE IT
AOBJN P3,.+1 ;UPDATE HIS POINTER
JRST GETJIX ;RETURN
;TABLE OF GETJI ITEMS - WORD IS EXECUTED TO GET ITEM IN AC1
GETJIT: MOVE 1,P1 ;JOB NUMBER
HLRE 1,JOBPT(P1) ;TTY NUMBER OR -1 IF DETACHED
CALL GETSN5 ;GET LOGIN DIRECTORY NUMBER
CALL GETSN4 ;GET CONNECTED STRUCTURE,,DIRECTORY
CALL GETSN1 ;SUBSYSTEM NAME
MOVE 1,JOBPNM(P1) ;PROGRAM NAME
MOVE 1,JOBRT(P1) ;RUN TIME
CALL GETSN3 ;JOB NUMBER OF OWNER OF PTY IF ANY
CALL GETRTL ;GET RUNTIME LIMIT OF JOB
CALL GETBB ;GET BATCH BIT
CALL GETJID ;GET DENSITY
LOAD T1,JSMTP,(P4) ;GET MAGTAPE PARITY DEFAULT
CALL GETJIM ;GET MAGTAPE DATA MODE
CALL GETJRS ;GET MAGTAPE RECORD SIZE
LOAD T1,JSDFS,(P4) ;GET DEFERRED SPOOLING BIT
CALL GETSN6 ;GET THE LOGGED IN DIRECTORY NUMBER
CALL GETJSR ;GET SESSION REMARK
MOVE T1,LSTLGN(P4) ;PICK UP LAST LOGIN D&T
MOVE T1,JSSRTM(P4) ;(.JISRT) Get session start runtime
MOVE T1,JSSCTM(P4) ;(.JISCT) Get SESsion start console time
CALL GETT20 ;GET TOPS20 COMMAND LEVEL FLAG
MOVE T1,SRTTIM(P4) ;GET TIME JOB WAS INITIALIZED
MOVE T1,BATSTF(P4) ;GET BATCH STREAM AND FLAGS WORD
CALL GETLL ;GET LOGICAL LOCATION
NGTJIT==.-GETJIT
;ACTION ROUTINES FOR ITEMS NOT AVAILABLE IN SINGLE MOVE
;GET CONNECTED STRUCTURE,,DIRECTORY
;GET CONNECTED STRUCTURE,,DIRECTORY
GETSN4: MOVE T1,P4 ;T1/OFFSET FOR ADDRESSING JSB
CALL GTOJCD ;GET CONNECTED STRUCTURE CODE,,DIRECTORY
RET
;GET LOGGED DIR NUMBER
GETSN5: HRRZ T1,JOBDIR(P1) ;GET DIR NUMBER
SKIPE T1 ;IF NOT LOGGED IN, RETURN 0
HRLI T1,USRLH ;MAKE IT BE A 36 BIT USER NUMBER
RET
;GET -1 OR 0 FOR TOPS20 COMMAND LEVEL OR USER LEVEL
GETT20: LOAD T1,JBT20,(P4) ;GET TOPS20 BIT
MOVN T1,T1 ;BIT ON => -1 (AT TOPS20 COMMAND LEVEL), BIT OFF => 0 (NOT AT T20)
RET
;GET THE LOGGED IN DIRECTORY NUMBER
GETSN6: MOVEI T1,PSNUM ;DIR IS ON PUBLIC STR
CALL STRCNV ;CONVERT IT
RETERR (,<CALL CLRJSB>)
HRLZS T1 ;GET UNIQUE CODE IN THE LEFT HALF
HRR T1,JOBDIR(P1) ;GET THE DIRECTORY NUMBER
RET ;AND RETURN
;GET SUBSYSTEM NAME
GETSN1: HRRZ 1,JOBNAM(P1) ;GET STATISTICS INDEX
MOVE 1,SNAMES(1) ;GET NAME
RET
;GET JOB NUMBER OF OWNER OF PTY
GETSN3: HLRE 1,JOBPT(P1) ;GET CONTROLLING TTY
JUMPL 1,RETO ;RETURN -1 IF DETACHED
CALL PTYGFK ;GET FORK WHICH OWNS PTY
JRST RETO ;NO PTY, RETURN -1
MOVEM 1,FX
LOAD 1,FKJOBN ;GET JOB NUMBER WHICH OWNS FORK
RET
;GET BATCH BIT
GETBB: HLRE T1,JOBPT(P1) ;GET CONTROLING TTY
JUMPL T1,RETZ ;IF NONE, JOB NOT CONTROLLED BY BATCH
CALL PTYGBB ;GET BATCH BIT
JRST RETZ ;NOT A PTY
RET ;ANSWER IS IN T1
;GET MAGTAPE DENSITY
GETJID: LOAD T1,JSMTD,(P4) ;GET DEFAULT DENSITY
SKIPN T1 ;USING SYSTEM DEFAULT?
MOVEI T1,MTDFDN ;YES
RET
;GET MAGTAPE DATA MODE
GETJIM: LOAD T1,JSMTM,(P4) ;GET DEFAULT DATA MODE
SKIPN T1 ;USING SYSTEM DEFAULT
MOVEI T1,MTDFDM ;YES
RET
;GET MAGTAPE RECORD SIZE
GETJRS: LOAD T1,JSMTR,(P4) ;GET RECORD SIZE
SKIPN T1 ;USING SYSTEM DEFAULT?
MOVEI T1,MTDFRS ;YES
RET
;GET RUNTIME LIMIT FOR THIS JOB
GETRTL: LOAD T1,JOBRTP,(P1) ;GET POINTER TO RUNTIME LIMIT BLK
JUMPE T1,R ;WAS NONE
LOAD T1,TIMTIM,(T1) ;GET ACTUAL LIMIT
RET
;GET SESSION REMARK
GETJSR: MOVEI T2,JSSRM(P4) ;ADDRESS OF REMARK IN JSB
GU1: UMOVE T1,0(P3) ;PLACE WHERE USER WANTS REMARK PUT
HRRZ T3,P3 ;GET USER ADDRESS FOR UPDATED POINTER
CALL CPYTU1 ;COPY REMARK TO USER SPACE
RETSKP ;SKIP SO POINTER DOESN'T GET UPDATED TWICE!
;GET LOGICAL LOCATION
GETLL: MOVEI B,LLSR-1(P4) ;ADDRESS OF LOCATION STRING (MINUS ONE FOR CPYTU1)
CALLRET GU1 ;USE STANDARD MAGIC FOR FINISHING UP
;CONVERT ASCIZ PTR TO SIXBIT WORD
; 1/ BYTE PTR TO ASCIZ STRING
; CALL ASZSIX
; RETURN +1: FAILURE, ILLEGAL CHARACTER
; RETURN +2: 1/ WORD OF SIXBIT
; ASCIZ STRING LONGER THAN 6 CHARACTERS IS TRUNCATED
ASZSIX::STKVAR <WSIX> ;DECLARE LOCAL VAR FOR SIXBIT WORD
SETZM WSIX ;CLEAR SIXBIT WORD
MOVE 3,[POINT 6,WSIX]
MOVEI 4,6 ;6 CHARS MAX
SNM3: XCTBU [ILDB 2,1] ;GET CHAR FROM USER
JUMPE 2,SNM4 ;END OF STRING IF NULL
CAIL 2,40 ;LEGAL CHARACTER?
CAIL 2,140
RET ;NO, DO +1 RETURN
SUBI 2,40 ;CONVERT TO SIXBIT
IDPB 2,3 ;BUILD SIXBIT
SOJG 4,SNM3 ;COUNT CHARS
SNM4: MOVE 1,WSIX ;GET SIXBIT
RETSKP
;LIGHTS, SWITCHES, AND OTHER MAINTENANCE STUFF
.SWTCH:: MCENT
MOVE 2,CAPENB
TXNN 2,SC%WHL+SC%OPR+SC%MNT ;SUFFICIENT CAPABILITIES?
JRST CAPXR ;NO
SETZ T1, ;INIT ANSWER
UMOVEM 1,1
SMRETN
.LITES::MCENT
MOVE 2,CAPENB
TRNN 2,SC%WHL+SC%OPR+SC%MNT ;REQUIRES STATUS
JRST CAPXR
SMRETN
.USRIO::MCENT
MOVEI 1,SC%WHL+SC%OPR+SC%MNT
TDNN 1,CAPENB ;REQUIRES STATUS
CAPXR: RETERR(CAPX2) ;RETURN BAD, USER LACKS CAPABILITIES
MOVSI 1,(1B6) ;USER IO BIT
IORM 1,0(P) ;PUT IT ON
SMRETN
;PEEK - AC1: N,,MONLOC
; AC2: USRLOC
.PEEK:: MCENT
MOVEI 3,SC%WHL+SC%OPR+SC%MNT
TDNN 3,CAPENB ;HAS NECESSARY CAPS?
RETERR(CAPX2) ;NO
MOVSI 5,0(1) ;SETUP BLT ARGS - FROM
HRRI 5,0(2) ; .. TO
MOVEI 6,0(2)
HLRZ 3,1 ;COUNT
HRRZ T4,T1 ; FIND MONITOR LIMIT
ADD T4,T3
ADDI 6,-1(3) ; .. TO LIMIT
;CHECK ALL PAGES OF SOURCE BLOCK FOR PROPER ACCESS
MOVEI 1,0(1) ;GET MONITOR ADDRESS
PEEK1: PUSH P,1
MRPAC ;GET ACCESS OF MONITOR PAGE
TLNN T1,-1 ;LEGAL RANGE? ** TO BE CHANGED FOR XADR **
TLNN 2,(PA%RD) ;READABLE?
RETERR(PEEKX2) ;NO
POP P,1
IORI 1,777 ;BUMP ADDRESS TO NEXT PAGE
ADDI 1,1
CAMGE 1,T4 ;CHECKED ALL PAGES?
JRST PEEK1 ;NO, GO CHECK NEXT ONE
UMOVE T3,T2 ;GET TO ADDRESS FROM USER
UMOVE T2,T1 ;GET FROM ADDRESS AGAIN
HLRZ T1,T2 ;FIND SIZE
HRLI T2,MSEC1 ;SECTION 1 IN MONITOR
CALL BLTMU1 ;TRANSFER FROM MONITOR TO USER
SMRETN
;ERROR - SC%WHL OR SC%OPR REQUIRED BUT NOT ENABLED
WHEELX: ITERR(WHELX1)
;DETACH FROM CONTROLLING TTY
.DTACH::MCENT
SKIPL T1,CTRLTT ;GET CONTROLLING TERMINAL
CALL PTYGBB ;ARE WE CONTROLLED BY BATCH?
SKIPA ; NO, CONTINUE
JUMPL T1,[MOVX T1,SC%WHL!SC%OPR ;IF CONTROLLED BY BATCH,
TDNN T1,CAPENB ;MUST HAVE WHEEL OR OPR
ITERR (CAPX1) ;NOT ENOUGH PRIVILEGES
JRST .+1] ;OK, DO IT
MOVX T1,.CTTRM ;FINISH OUTPUT ON CONTROLLING TERMINAL
DOBE ; BECAUSE TTYDAS WILL RELEASE BUFFERS
;**;[2874]Add one line at .DTACH: +11L RWW 23-NOV-82
ERJMP .+1 ;[2874]ignore errors
CALL LDTACH ;DO THE WORK
MRETNG ;AND ALL DONE
;DTACH CALLED INTERNALLY
;**;[2879] Change 1 line at LDTACH:+0L DSC 7-DEC-82
LDTACH: STKVAR <LDTALN,TSTRTN> ;[2879]Detach line number, Test Routine address
LDTAC2: SKIPGE T2,CTRLTT ;DOES JOB HAVE A CONTROLLING TERMINAL?
RET ;NO. DON'T DO ANYTHING
HRLOI T1,(TL%CRO+TL%COR+TL%SAB+TL%ABS)
CAMN T2,CTYLNO ;Detaching CTY?
TXZ T1,TL%ABS ;Always leave CTY refusing links
MOVEI T2,-1
TLINK ;BREAK LINKS
JFCL
CALL LCKDVL ;LOCK DEVICE LOCK, NO NOINT
SKIPGE T2,CTRLTT ;GET CONTROLLING TTY
JRST [ UNLOKK DEVLKK ;NOT THERE, RELEASE DEVLKK
;**;[2879] Replace 1 line at LDTAC2:+11L DSC 7-DEC-82
MOVEM T1,TSTRTN ;[2879]SAVE TEST ROUTINE ADDR
MOVE T2,LDTALN ;MIGHT BE DYNAMIC DATA LOCKED BY SOME JSYS
MOVEI T3,"C"-100;SO GIVE JOB A ^C AND HOPE
CALL TTPSRQ ;WONT HELP IF TRAPPING ^C
;**;[2879] Replace 1 line at LDTAC2:+15L DSC 7-DEC-82
MOVE T1,TSTRTN ;[2879]PUT ADDRESS BACK
OKINT ;GO OKINT AND
RET ] ;RETURN
MOVEM T2,LDTALN ;SAVE LINE NUMBER
CALL STADYN ;POINT TO DYNAMIC DATA
JRST LDTAC3 ;NOT ACTIVE. SHOULDN'T HAPPEN
CALL TTFWAK ;WAKE UP PROCESS IN INPUT WAIT ON THIS LINE
MOVE T2,LDTALN ;T2/ LINE NUMBER
CALL TTYDAS ;DEASSIGN DYNAMIC DATA
JRST [ UNLOKK DEVLKK ;FAILED - UNLOCK DEVICE LOCK
OKINT ;LCKDVL WENT NOINT
TXZN T1,1B0 ;ERROR OR WAIT?
RET ;ERROR. CURRENTLY NO WAY TO HANDLE THIS
HRL T1,LDTALN ;T1/(LINE NUMBER,,ADDRESS OF TEST ROUTINE)
MDISMS ;WAIT UNTIL DEALLOCATION IS POSSIBLE
JRST LDTAC2] ;TRY AGAIN
LDTAC3: SETOM CTRLTT ;INDICATE JOB DOESN'T HAVE CONTROLLING TERMINAL
MOVE T1,JOBNO
HRROS JOBPT(T1)
UNLOKK DEVLKK ;UNLOCK DEVICE LOCK
HRRE T1,JOBDIR(T1)
CAIE T1,0 ;LOGGED IN?
JRST [ MOVE T2,LDTALN ;T2/ LINE NUMBER
CALL DETMSG ;YES. NOTE EVENT ON LOGGING TERMINAL
JRST .+1]
OKINT
RET
;LDET2 - DETACH JOB FROM TERMINAL WITHOUT DEALLOCATING TERMINAL DATA
;RETURNS +1: ALWAYS
;PRESERVES T2
LDET2: STKVAR<LDETSV>
HRLOI T1,(TL%CRO+TL%COR+TL%SAB+TL%ABS)
MOVE T2,CTRLTT ;GET CONTROLLING TERMINAL
CAMN T2,CTYLNO ;Check for CTY
TXZ T1,TL%ABS ;CTY should default to refuse links
MOVEI T2,-1
TLINK ;BREAK LINKS
JFCL
CALL UNPAGE ;CLEAR PAGING
MOVE 2,CTRLTT ;T2/ CONTROLLING TERMINAL NUMBER
MOVEM T2,LDETSV ;SAVE IT
MOVE 1,JOBNO
HRRE T1,JOBDIR(T1) ;GET LOGGED IN DIRECTORY
CAIE T1,0 ;LOGGED IN?
CALL DETMSG ;YES, DO MESSAGE AND EFACT
SETOM CTRLTT ;INDICATE NO CONTROLLING TERMINAL
MOVE T1,JOBNO ;GET JOB NUMBER
HRROS JOBPT(T1) ;INDICATE NO CONTROLLING TERMINAL
MOVE T2,LDETSV ;T2/ LINE NUMBER
CALL LCKTTY ;POINT TO DYNAMIC DATA
SKIPA ;NOT ACTIVE
CALL TTFWAK ;WAKE FORK IN INPUT WAIT ON THIS LINE
CALL ULKTTY ;ALLOW DEALLOCATION
MOVE T2,LDETSV ;RESTORE LINE NUMBER
RET
;ROUTINE TO TURN OFF PAGE MODE FOR CONTROLLING TERMINAL.
;CLOBBERS A AND B
UNPAGE: MOVEI A,.PRIOU ;THE CONTROLLING TERMINAL
MOVEI B,.MOXOF ;CLEAR PAUSE ON END
SETZM C
MTOPR ;DO IT
;**;[2874]Add one line at UNPAGE: +4L RWW 23-NOV-82
ERJMP .+1 ;[2874]ignore errors
RET ;AND DONE
;PROCEDURE TO HANDLE DATASET CARRIER OFF OR PTY CLOSED.
;DETACH JOB IMMEDIATELY, LOGOUT AFTER 5 MINUTES IF NOT REATTACHED.
;INVOKED ON REQUEST BY PSI SERVICE
JOBCOF::SKIPGE SLOWF ;IN JSYS CONTEXT?
JRST [ MCENTR ;NO, GET THERE
PUSH P,[IFIW!MRETN] ;SETUP RETURN
JRST .+1]
SE1ENT ;GET INTO SECTION 1
;**;[3162] Change 1 line at JOBCOF:+5 DML 10-Sep-84
ACSAV ;[3162] Save all the registers
MOVE 1,JOBNO
SKIPGE B,CTRLTT ;HAVE A CONTROLLING TTY?
JRST JOBCF1 ;NO
CALL GTCJOB ;GET ITS OWNING JOB
JRST JOBCF2 ;NONE. GO ON
CAIN C,0(A) ;SAME AS THIS ONE?
JRST JOBCF1 ;YES. GO ON
JOBCF2: SETOM CTRLTT ;NO. CLEAR THIS ASSIGNMENT
MOVE T1,JOBNO
HRROS JOBPT(T1) ;ALSO CLEAR CONTROLLING TTY HERE
JOBCF1: CALL LDTACH ;DO LOCAL DETACH
MOVE T1,JOBNO
HRRZ 1,JOBDIR(1) ;SEE IF NOW LOGGED IN
IFE. T1
MOVX T1,UMODF ;NO, RESET STACK AND LOGOUT
MOVEM T1,FFL
SETZM FPC
JRST FLOGO
ENDIF.
MOVE T1,BITS+.TICRF ;CHECK TO SEE WHAT THE TOP FORK THINKS
TDNE T1,TTSPSI ; OF TAKING A CARRIER OFF INTERUPT
RET ;IT THINKS SO, SO LET IT TRY
CALL FFORKI ;INDIRECTLY FREEZE ALL INFERIORS
;**;[2941] CHANGE 1 LINE AT JOBCF1:+13L TAM 7-APR-83
MOVE 1,COFTIM ;[2941] GET TIME TO BE DETACHED
CALL SETBKT ;COMPUTE BLOCKT DATA
HRRI 1,COFTST ;SETUP SPECIAL TEST
MOVSI T2,FHV1 ;LOW BLOCK PRIORITY
HDISMS
MOVE 1,JOBNO ;SEE IF NOW ATTACHED
SKIPL JOBPT(1)
IFSKP.
MOVX T1,UMODF ;USER PC FAKE
MOVEM T1,FFL
SETZM FPC
MCENTR ;RESET STACK, INIT JSYS CONTEXT
MOVE T1,JOBNO
HRRZ T1,JOBDIR(T1) ;DIRECTORY
JUMPE T1,FLOGO1 ;DONT CHECK IF NOT LOGGED IN
HRLI T1,USRLH
CALL CNVDIR ;GET THE NUMBER OF THAT DIRECTORY
GTDAL ;GET ALLOCATION
ERJMP FLOGO1 ;DONT TRY ACJ IF THERE IS AN ERROR
SETOM T1 ;FAKE A LOGOUT WITH -1 AS ARG
;**;[2812] CHANGE 1 LINE AT JOBCF1:+33L TAM 14-SEP-82
GTOKM (.GOLGO,<T2,T3,T1>,FLOGO1) ;[2812] ASK ACJ, BUT IN ANYCASE,
;LOG OUT THIS USER. (THIS IS ONLY TO BE NICE
;TO ACJ, WHO MAY NOT BE NICE TO US)
JRST FLOGO1
ENDIF.
NOINT ;KEEP CONTROL
HLRZ T2,JOBPT(T1) ;GET CONTROLLING TTY
MOVEI T3,"C"-100 ;FAKE A CONTROL-C
CALL TTPSRQ ;""
CALL RFORKI ;RESUME ALL INDIRECTLY FROZEN INFERIORS
OKINT ;ALLOW INTS AGAIN
RET
;SCHEDULER TEST FOR ABOVE. WAITS UNTIL JOB ATTACHED OR SPECIFIED TIME
;ELAPSED
RESCD
COFTST: LOAD 2,FKJOBN ;GET JOB NUMBER
SKIPL JOBPT(2) ;NOW ATTACHED?
JRST 1(4) ;YES, WAKEUP
JRST BLOCKT ;NO, GO TEST TIME
SWAPCD
;ATTACH JOB TO TTY
;ACCEPTS:
; T1/ FLAGS,,JOB NUMBER TO ATTACH TO
; T2/ USER NUMBER OF JOB IN AC 1
; T3/ POINTER TO PASSWORD STRING
; T4/ DESIGNATOR FOR TERMINAL TO BE USED IF AT%TRM FUNCTION OF 1
; IS ON.
; ATACH
;RETURN +1: FAILURE, ERROR CODE IN 1
;RETURN +2: SUCESS.
.ATACH::MCENT
SAVEAC <Q1,Q2,FX> ;DEFINE ALL Q'S TO USE AS WORK REGS
STKVAR <ATACJN,ATACDR,ATACLN,ATACUN>
MOVEM T2,ATACUN ;STASH THE USER NUMBER
UMOVE Q1,1 ;BITS MODIFYING THE ATACH
TXNE Q1,AT%TRM ;PROXY ATTACH
JRST ATACH1 ;YES. DO NOT CARE ABOUT USER NUMBER
HLRZ T3,T2 ;GET UNIQUE CODE OF USER NUMBER
CAIE T3,USRLH ;IS THIS A LEGAL USER NUMBER?
RETERR (ATACX3) ;NO, GIVE ERROR RETURN
ATACH1: MOVEI T1,0(T1) ;GET OBJECT JOB NUMBER
JUMPE T1,[RETERR (ATACX1)] ;CAN'T ATTACH TO JOB 0
MOVEM T1,ATACJN ;SAVE JOB NUMBER TO ATTACH TO
CAIGE T1,NJOBS ;REASONABLE JOB NUMBER?
SKIPGE JOBRT(T1) ;AND JOB EXISTS?
ATACH5: RETERR(ATACX1) ;NO
TXNN Q1,AT%TRM ;PROXY ATTACH
IFNSK. ;IF NOT
CAMN T1,JOBNO ;TRYING TO DO HIS JOB?
RETERR (ATACX2) ;YES. ERROR
ELSE.
UMOVE FX,4 ;GET TTY NUMBER TO ATACH THE JOB TO
ANDI FX,377777 ;JUST LINE NUMBER PART
SKIPG FX ;VALID TTY NUMBER?
RETERR (ATACX7) ;NO, FAIL
CAIL FX,NLINES ;EXISTANT LINE?
RETERR (ATACX1) ;NO. FAIL.
ENDIF.
HRRZ T3,JOBDIR(T1) ;DIRECTORY OF OTHER JOB
MOVEM T3,ATACDR ;SAVE DIRECTORY NO. FOR FACT FILE
CAIE T3,0(T2) ;SAME AS SPECIFIED?
RETERR(ATACX3) ;NO
;**;[3010] Add 7 lines after ATACH5:+16 DML 7-SEP-83
SKIPL T1,CTRLTT ;[3010] GET CONTROLLING TERMINAL
CALL PTYGBB ;[3010] ARE WE CONTROLLED BY BATCH?
SKIPA ;[3010] NO, CONTINUE
JUMPL T1,[MOVX T1,SC%WHL!SC%OPR ;[3010] IF CONTROLLED BY BATCH,
TDNN T1,CAPENB ;[3010] MUST HAVE WHEEL OR OPR
RETERR(CAPX1) ;[3010] NOT ENOUGH PRIVILEGES
JRST .+1] ;[3010] OK, CONTINUE
; ..
; ..
;SEE IF USER CAN LEGALLY ATTACH OTHER JOB. ATTACH IS LEGAL IF
;BOTH JOBS ARE SAME USER, IF THIS USER IS SC%WHL, OR IF
;USER GIVES PROPER PASSWORD
;ALSO, ATACH IS LEGAL IF JOB BEING ATTACHED IS OWNED BY THE
;SAME USER AS THE OWNER OF THE PTY CONTROLLING THE JOB DOING THE
;ATACH AND THE JOB DOING THE ATACH IS NOT YET LOGGED IN.
;ALSO, IF OWNER OF PTY IS AN ENABLED WHEEL OR OPR, JOB
;ON PTY MAY ALWAYS DO ATACH.
;ALSO, LEGAL IF OBJECT JOB IS OWNED BY ATACH-ER, DUE TO CRJOB.
;IN ADDITION, ATTACHING TO A JOB CONTROLLED BY BATCH IS ILLEGAL
;WITHOUT BEING LOGGED-IN WITH WHEEL OR OPR PRIVS ENABLED.
MOVE T1,ATACJN ;GET OBJECT JOB NUMBER
MOVX T2,<-1,,T4> ;GETJI ARGUMENT POINTER
MOVX T3,.JIBAT ;SEE IF UNDER CONTROL OF BATCH
GETJI ;GET THE INFORMATION
SETZ T4, ;CONTINUE, CATCH THIS LATER
JUMPL T4,[MOVE T2,JOBNO ;BATCH JOB. USER MUST BE LOGGED-IN
MOVX T1,SC%WHL!SC%OPR ; WITH WHEEL OR OPR ENABLED
SKIPE JOBDIR(T2) ;TEST LOGIN
TDNN T1,CAPENB ;IS LOGGED-IN, TEST CAPS
RETERR (CAPX1) ;NOT GOOD ENOUGH
JRST .+1] ;OK, CONTINUE IN-LINE
TXNE Q1,AT%NAT ;DOING ATACH OR UNATTACH?
IFSKP. ;IF ATTACH
HRRZ T4,CTRLTT ;ASSUME THIS IS THE TTY #
TXNE Q1,AT%TRM ;IS IT A PROXY?
MOVE T4,FX ;YEP
;**;[2859] REPLACE 2 LINES WITH 1 AT ATACH5:+48L TAM 3-NOV-82
MOVE T3,ATACJN ;[2859] GET TARGET JOB NUMBER
GTOKM (.GOATJ,<T3,T4>,[RETERR()]) ;LET ACJ SNIFF THIS
ENDIF.
MOVE T3,ATACDR ;REFETCH OTHER USER NUMBER
MOVE T2,JOBNO ;GET THIS JOB NUMBER
HRRZ T2,JOBDIR(T2) ;GET USER NUMBER FOR THIS JOB
CAMN T2,T3 ;SAME AS OTHER JOB?
JRST ATACH3 ;YES, NO FURTHER LEGALITY CHECKS
JUMPN T2,ATACH6 ;PTY OWNER IS IRRELEVANT IF NOT LOGGED IN
MOVE T1,CTRLTT ;SEE IF I AM ON A PTY
JUMPL T1,ATACH6 ;JUMP IF NO CONTROLLING TTY
CALL PTGETJ ;GET CONROLLING JOB # OR -1
JUMPL T1,ATACH6 ;NON-PTY DOING THE ATACH IF -1
HRRZ T4,JOBDIR(T1) ;T4 GETS OWNER OF PTY
XCTU [HRRZ T3,T2] ;GET OWNER OF JOB BEING ATACHED
CAMN T3,T4 ;THE SAME?
JRST ATACH3 ;YES, SO NO PASSWORD NEEDED
CALL GJCAPS ;GET CAPABILITIES OF OWNER OF PTY
TXNE T1,SC%WHL+SC%OPR ;PRIVILEGED?
JRST ATACH3 ;YES, SO NO PASSWORD NEEDED
ATACH6: MOVE T3,ATACDR ;GET DIR NUMBER
MOVEI T1,SC%WHL+SC%OPR
TDNE T1,CAPENB ;THIS USER HAS CAPS?
JRST ATACH3 ;YES, NO FURTHER CHECKS
MOVE T1,ATACJN ;SEE IF I OWN THE JOB
HRRZ T1,JOBONT(T1) ;OWNER FIELD
CAMN T1,JOBNO ;IS IT ME?
JRST ATACH3 ;YES, THEN IT'S LEGAL.
UMOVE T1,2 ;GET USER NUMBER FOR PASSWORD CHECK
CALL CNVDIR ;GET USER'S LOGGED-IN DIRECTORY NUMBER
UMOVE T2,T3 ;GET PTR TO PASSWORD STRING
TRNE T3,-1 ;FAIL IF JOB NOT LOGGED IN
CALL PASSWC ;PROPER PASSWORD?
JRST [ MOVE T2,T1 ;SAVE FLAG
MOVEI T1,^D3000 ;NO, DELAY TO FOIL PASSWORD THIEVES
SKIPN T2 ;NEED TO SLEEP?
DISMS
RETERR(ATACX4)] ;NOW BOMB OUT
;USER HAS PROVEN RIGHT TO DO THIS. THE FOLLOWING DATA IS AVAILABLE:
; JOBNO/ JOB NUMBER OF CALLER OF JSYS
; CTRLTT/ TERMINAL AT WHICH CALLER IS RUNNING
; ATACJN/ JOB NUMBER TO BE ATTACHED TO THIS TERMINAL
;USER WANTS TO ASSOCIATE THE JOB IN ATACJN WITH THE TERMINAL IN CTRLTT
;IF THE JOB IS CURRENTLY ATTACHED, IT MUST BE DETACHED FIRST
ATACH3: TXNE Q1,AT%TRM+AT%NAT ;IS MY TTY TO BE USED?
JRST ATACH9 ;NOT BY DEFAULT, ANYWAY.
SKIPGE FX,CTRLTT ;YES. GET MY TTY
RETERR ATACX2 ;I DON'T HAVE ONE. FAIL.
ATACH9: TXNN Q1,AT%TRM ;USING A DIFFERENT LINE?
JRST ATACHB ;NO
HRRZ T2,FX ;YES, BETTER ASSIGN SOME DYNAMIC DATA
NOSKED ;PREVENT STATE CHANGES
CALL GTCJOB ;GET CONTROLLING JOB
IFSKP. ;IF ASSIGNED
;**;[2892]Change one line at ATACH9: +6L RWW 4-JAN-83
;**;[3133]Change 1 line to 3 at ATACH9: + 6L TAB 28-JUN-84
CAIE T3,777777 ;[3133]UNASSIGNED?
CAMN T3,JOBNO ;[3133][2892]THIS JOB?
SKIPA ;[3133]UNASSIGNED OR ASSIGNED TO THIS JOB
RETERR (DEVX2,<OKSKED>)
ENDIF.
CALL TTYASC ;ASSIGN AS CONSOLE
RETERR(,<OKSKED>)
OKSKED
ATACHB: MOVE T1,ATACJN ;GET BACK OBJECT JOB NUMBER
CALL SETJSB ;SETUP OTHER JOB'S JSB
MOVEI Q2,0(T1) ;SAVE OFFSET FOR OTHER JOB'S JSB
SKIPGE T2,CTRLTT(Q2) ;OTHER JOB NOW ATTACHED?
JRST ATACH2 ;NO. DON'T DETACH IT
;OBJECT JOB IS ATTACHED. DETACH IT FROM ITS CURRENT CONTROLLING
;TERMINAL AND DEALLOCATE THAT TERMINAL'S DATA
MOVEM T2,ATACLN ;SAVE ITS CONTROLLING TERMINAL
CALL LCKDVL ;LOCK DEVICE LOCK, GO NOINT
NOSKED ;MUST DETACH IT FIRST
CALL STADYN ;POINT TO DYNAMIC DATA
;**;[2827] Replace 2 lines with 1 at ATACHB:+9.L PED 2-OCT-82
JRST ATACH7 ;[2827] NOT ACTIVE, DON'T DEASSIGN IT
CALL TTFWAK ;WAKE FORK IN INPUT WAIT ON THIS LINE
MOVE T2,ATACLN ;T2/ LINE NUMBER
CALL TTYDAS ;DEASSIGN THE LINE
JRST [ PUSH P,T1 ;SAVE THE ERROR CODE
OKSKED
CALL CLRLFK ;UNMAP THE JSB
UNLOKK DEVLKK ;UNLOCK DEVICE LOCK
OKINT ;LCKDVL WENT NOINT
POP P,T1 ;GET THE CODE BACK
TXZN T1,1B0 ;NEED TO WAIT?
RETERR ;NO. RETURN FAILURE
HRL T1,ATACLN ;T1/(LINE NUMBER,,ADDRESS OF TEST ROUTINE)
MDISMS ;WAIT UNTIL DEALLOCATION IS POSSIBLE
JRST ATACH3] ;TRY AGAIN
ATACH7: SETOM CTRLTT(Q2) ;INDICATE JOB HAS NO CONTROLLING TERMINAL
MOVE T1,ATACJN ;GET OBJECT JOB NUMBER
HRROS JOBPT(T1) ;NO CONTROLLING TERMINAL AGAIN
OKSKED
UNLOKK DEVLKK ;UNLOCK DEVICE LOCK
OKINT ;LCKDVL WENT NOINT
MOVE T2,ATACLN ;T2/ LINE NUMBER OF DETACHED JOB
MOVE T3,JOBNO ;GET THIS JOB NUMBER
HRRZ T3,JOBDIR(T3) ;GET USER NUMBER FOR THIS JOB
HRLI T3,USRLH ;MAKE IT BE A USER NUMBER
MOVE T4,CTRLTT ;AND TTY # OF DETACHER
CALL DETMS1 ;TELL JOB IT'S BEING DETACHED
; ..
;OBJECT JOB HAS BEEN DETACHED. DETACH CALLER FROM CONTROLLING TERMINAL
;AND ATTACH OBJECT JOB TO THAT TERMINAL. DON'T DEALLOCATE THE DYNAMIC
;DATA FOR THE TERMINAL
;..
ATACH2: TXNE Q1,AT%NAT ;REQUESTED NO ATTACH?
JRST ATACH4 ;YES
MOVEM FX,ATACLN ;NO, MAKE SURE LINE RIGHT
MOVE T2,FX ;prepare for LDET2
NOINT ; ..
CAMN FX,CTRLTT ;NEED TO GIVE AWAY MY TERMINAL?
CALL LDET2 ;YES, DETACH THIS JOB BUT KEEP DYNAMIC DATA
NOSKED
;ASSIGN OBJECT JOB TO CORRECT TERMINAL
MOVE T4,ATACJN ;GET OBJECT JOB
MOVEM FX,CTRLTT(Q2) ;SET CTRLTT IN DEST JOB
HRLM FX,JOBPT(T4)
MOVEI T1,.TTDES(FX) ;T1/ DEVICE DESIGNATOR FOR TERMINAL
CALL CHKDES ;GET INDEX TO DEVICE TABLES
BUG(TTBAD1)
MOVE T1,ATACJN ;GET OTHER JOB NUMBER
HRLM T1,DEVUNT(T2) ;INDICATE OTHER JOB OWNS THE TERMINAL
MOVE T2,ATACLN ;T2/ TERMINAL NUMBER
MOVE T1,TTSPSI(Q2) ;T1/ INTERRUPT WORD FOR OTHER JOB
MOVE T3,TTSDPS(Q2) ;T3/ DEFERRED INTERRUPT WORD FOR OTHER JOB
CALL TTSINT ;SET INTERRUPT WORDS FOR THIS TERMINAL
MOVE T1,ATACJN ;T1/ OTHER JOB
CALL STCJOB ;SET THIS AS CONTROLLING THE TERMINAL
OKSKED
OKINT
CALL CLRLFK ;CLEAR MAPPING OF JSB
MOVE T1,ATACJN
MOVE T2,ATACLN ;SET UP JOB/LINE INFO
CALL ATAMSG ;DO LOGGING STUFF
MOVE T1,JOBNO
HRRE T1,JOBDIR(T1)
JUMPE T1,LOGO ;VANISH IF NOT LOGGED IN
SMRETN
;HERE IF CALLER REQUESTED "NO ATTACH", I.E. DETACHING REMOTE JOB
ATACH4: CALL CLRLFK ;CLEAR MAPPING OF JSB
MOVE T1,ATACJN ;SET JOB #
MOVE T2,ATACLN ; AND LINE #
CALL DETMS0 ;DO LOG MSG AND FACT FILE ENTRY
SMRETN
ENDSV. ;END STKVAR
;USAGE UTILITIES FOR JOB 0
;USAGE VARIABLES
NR CKPGID,1 ;PAGE IDENT OF CURRENT MAPPED PAGE UN CHECKPOINY FILE
;INIT USAGE DATA BASE
USGINI: SAVEAC <Q1,Q2,FX> ;PRESERVE ALL TEMP WORK REGS
STKVAR <CKPNJ,CKIDNT>
SETOM USGLOK ;CLEAR LOCKS
SETZM USQCNT ;EMPTY QUEUE
SETZM USGBEG ;INIT QUEUE
MOVEI T1,USGBEG-1
MOVEM T1,USGEND ;TO BE EMPTY
SETZM USGEOF ;INIT EOF POINTER
SETZM CKPJFN ;NO JFN'S YET
SETZM USGJFN ;...
SETZM CKPGID ;NO PAGE MAPPED
MOVE T1,TODCLK ;SETUP FIRST CHECKPOINT INTERVAL
ADD T1,CKPINV
MOVEM T1,CKPTIM ;TIME FOR FIRST CHECKPOINT
MOVX T1,SF%CDE ;FILE SYSTEM OK?
TDNE T1,FACTSW
JRST [ TMSG <? System accounting will not be done due to file system errors
>
RET]
USGIN1: HRROI T2,USGFIL ;FILESPEC FOR USAGE FILE
CALL USGOPN ;OPEN FILE
JRST [ CALL CRUSGF ;NONE - CREATE USAGE FILE
BUG (UXXCRE)
JRST USGIN1] ;TRY AGAIN
MOVEM T1,USGJFN ;STORE JFN
TXO T1,CO%NRJ ;RETAIN JFN
CLOSF ;THIS SHOULD CORRECT PAGE COUNT
JFCL ;SHOULDN'T HAPPEN
MOVX T2,44B5+OF%RD!OF%WR!OF%RTD
MOVE T1,USGJFN ;FETCH JFN
OPENF ;OPEN FOR REAL NOW
BUG (UXXOPN)
HRRZ T1,T1 ;GET RID OF OPEN FLAGS
FFFFP ;FIND-FIRST-FREE-FILE PAGE
HRRZ Q1,T1 ;SAVE PAGE NUMBER
MOVE T1,USGJFN ;JFN AGAIN
MOVE T2,[1,,.FBBYV] ;GET PAGE COUNT
MOVEI T3,T4 ; INTO T4
GTFDB
HRRZS T4 ;PAGE # ONLY
CAME Q1,T4 ;CORRECT NUMBER
BUG (USGHOL)
JUMPE Q1,USGIN4 ;EMPTY FILE IF 0
USGIN2: SETZ Q2, ;INIT TO WORD 0
JUMPL Q1,USGIN3 ;MUST BE EMPTY IF NONE LEFT
SOS T1,Q1 ;WANT LAST PAGE
HRL T1,USGJFN ; FROM USAGE FILE
MOVX T2,PM%RD ;READ ONLY
CALL USGMAP ;MAP PAGE
MOVEI Q2,777 ;SCAN BACK FROM END OF PAGE
SKIPN T1,FPG0A(Q2) ; FOR FIRST NON-ZERO WORD
SOJGE Q2,.-1 ;...
AOJE Q2,[SOJA Q1,USGIN2] ;PAGE WAS ALL ZEROS
;ADJUST COUNT TO FIRST AVAIL WORD
;..
;..
USGIN3: IMULI Q1,PGSIZ ;CALC EOF POINTER
ADD Q1,Q2
USGIN4: MOVEM Q1,USGEOF ;SETUP LOC
;CHECKPOINT INIT
USGIN5: HRROI T2,CKPFIL ;FILE NAME FOR CHECKPOINT
CALL USGOPN ;OPEN IT
JRST [ CALL CRCKPT ;NON-EX CREATE NEW ONE
BUG (UXXCKP)
JRST USGIN5]
MOVEM T1,CKPJFN ;SAVE JFN
HRLZS T1 ;START AT PAGE 0
MOVEM T1,CKIDNT ;SAVE IDENT
MOVX T2,PM%RD
CALL USGMAP ;MAP PAGE
MOVE Q1,FPG0A+1 ;GET # OF JOBS IN FILE
ERJMP CKPBAD ;IF NON-EX PAGE, FILE IS BAD
MOVE T1,FPG0A+3 ;SIZE OF CHECKPOINT RECORD
CAIN T1,CKPSIZ ;BETTER BE SAME
CAIGE Q1,NJOBS ;.GE. MAX JOBS IN MONITOR
CKPBAD: JRST [ BUG (UXXFIT)
CALL UNMAPC
MOVE T1,CKPJFN ;CLOSE AND DELETE (EXPUNGE)
TXO T1,CO%NRJ
CLOSF
JFCL
MOVE T1,CKPJFN
TXO T1,DF%EXP
DELF
JFCL
SETZM CKPJFN
JRST USGIN5] ;START OVER FOR CHECKPOINT
MOVEM Q1,CKPNJ ;SAVE NUMBER OF JOBS IN FILE
MOVE T1,FPG0A+2 ;GET DATE/TIME OF LAST CHECKPOINT
MOVEM T1,CKPDTL ;SAVE
SKIPN USGEOF ;USAGE FILE EMPTY?
JRST USGI6B ;YES - SKIP THIS
HRLZ T1,CKPJFN ;START AT PAGE 0 AGAIN
USGIN6: MOVEI Q2,PGSIZ/CKPSIZ ;NUMBER OF JOBS/PAGE
SETZ FX, ;INIT OFFSET
MOVX T2,PM%RD
MOVEM T1,CKIDNT ;SAVE IDENT
CALL USGMAP
SKIP FPG0A ;TEST PAGE FOR GOODNESS
ERJMP CKPBAD ;NOT GOOD IF INTERRUPT TAKES
USGI6A: SKIPLE T4,FPG0A(FX) ; .GT. 0 MEANS WRITE IN PROGRESS
MOVEM T4,USGEOF ;THIS IS ACTUAL USGEOF
ADDI FX,CKPSIZ ;STEP TO NEXT ENTYR
SOJLE Q1,USGI6B ;MORE JOBS TO DO?
SOJG Q2,USGI6A ;YES - MORE IN THIS PAGE?
MOVE T1,CKIDNT ;RESTORE LAST PAGE MAPPED
AOJA T1,USGIN6 ;STEP TO NEXT PAGE
USGI6B: CALL UNMAPC ;UNMAP CHECKPOINT PAGE; THIS IS THE LAST TIME
; WE WILL BE USING ONLY READ ACCESS
MOVE T1,USGJFN ;GET USAGE FILE JFN
MOVE T2,USGEOF ;CURRENT EOF
SFPTR ;SET TO START WRITTING HERE
JFCL ;IGNORE ERRORS
MOVX T1,SF%USG ;TURN ON USAGE JSYS
IORM T1,FACTSW ;...
;..
;..
MOVE T1,TODCLK ; GET MONITOR UPTIME IN MSEC
IDIVI T1,^D1000 ; MAKE IT SECONDS
MOVEM T1,USGMUP ; AND STORE IT WHERE RESTART LIST KNOWS
MOVE T1,TODCLK ; GET MONITOR UPTIME IN MSEC
IDIVI T1,^D1000 ; MAKE IT SECONDS
MOVEM T1,USGMUP ; AND STORE IT WHERE RESTART LIST KNOWS
;WRITE RESTART RECORD NOW
MOVEI T1,.USENT ;GENERATE ENTRY
MOVEI T2,RSTLST ;POINT TO RESTART LIST
USAGE ;THIS WILL MAKE A RECORD ON USQ
CALL USGMES ;IMMEDIATELY WRITE INTO FILE
MOVEI Q1,1 ;MERGE CHECKPOINT FILE
SOS CKPNJ ; FOR JOBS 1 THRU NJOBS-1
CALL LGTAD ;GET DATE/TIME
MOVE Q2,T1 ;SAVE IN Q2
USGIN7: MOVE T1,Q1 ;JOB #
CALL USGSPG ;SET PAGE FOR THIS JOB
SKIPGE 0(T4) ;IS ENTRY ACTIVE?
JRST USGIN8 ;NO, GET NEXT ENTRY
MOVEI T2,.UTCKP ;RECORD TYPE FOR CHECKPOINT MERGE
HRLM T2,1(T4) ;STORE IN HEADER
HRRZ T3,1(T4) ;GET RECORD LENGTH
CAIL T3,CKPSIZ ;IS LENGTH LESS THAN MAX SIZE?
JRST [ BUG (CKPLEN) ;NO, THIS IS A BUG
JRST USGIN8] ;AND IGNORE ENTRY
ADD T3,T4 ;ADD IN BASE
HRLM T2,0(T3) ;STORE TYPE IN TRAILER ALSO
MOVEM Q2,2(T4) ;SET ENTRY DATE/TIME TO NOW.
CALL USGUP0 ;UPDATE FOR THIS JOB
USGIN8: CAMGE Q1,CKPNJ ;DONE?
AOJA Q1,USGIN7 ;NO - INCR AND PROCEDE
CALL UNMAPC ;UNMAP CHECKPOINT PAGE
CALLRET NXTASC ;Find next acct shift change time
; and return from USGINI
;Initialize accounting shift change stuff
;Must be done before SETSPD is run!!!
ASCINI: SETZM ASCPTR ;Indicate no accounting shift changes yet
SETZM ASCTIM ; and no time set for next one
SETOM ASCLOK ;Leave ASCPTR lock unlocked
RET ;Return from ASCINI
;RESTART ENTRY DATA LIST
RSTLST: USENT. (.UTRST,1,1) ;RESTART RECORD TYPE
USSNM. (<-1,,SVN>) ;SYSTEM NAME STRING
USMVR. ([EXP SVNM]) ;SYSTEM VERSION NUMBER
USPNM. (<SIXBIT "MONITR">,US%IMM)
USPVR. ([EXP SVNM]) ;MONITOR NAME/VERSION FOR USAGE
USMBD. (SYSTAD) ;MONITOR BUILD DATE/TIME
USMUP. (USGMUP) ; MONITOR UPTIME SINCE LAST RELOAD
USLCK. (CKPDTL) ;DATE/TIME OF LAST CHECKPOINT
USMUP. (USGMUP) ; MONITOR UPTIME SINCE LAST RELOAD
USCP0. (APRSER) ;APR SERIAL NUMBER
0 ;END OF LIST
;ROUTINE TO OPEN A FILE FOR READ/WRITE
USGOPN: MOVX T1,GJ%SHT!GJ%PHY!GJ%OLD
GTJFN
RET ;NON-EX RETURN
MOVX T2,44B5+OF%RD!OF%WR!OF%RTD
OPENF ;OPEN FILE
RET ;FAILURE
RETSKP ;OK - RETURN
;ROUTINE TO CREATE USAGE FILE
CRUSGF: MOVX T1,GJ%SHT!GJ%PHY!GJ%FOU
HRROI T2,USGFIL
GTJFN
RET ;ERROR
MOVX T2,44B5+OF%WR ;WRITE FIRST
OPENF
RET ;FAILURE
CALL USGNOD ;SET NO-DUMP
HRLI T1,.FBBYV ;CHANGE THIS WORD
TXO T1,CF%NUD
MOVX T2,FB%RET ;RETENTION COUNT
MOVEI T3,0 ; TO BE 0
CHFDB
HRRZS T1 ;JFN ONLY AGAIN
CLOSF ;FIX ON DISK
JFCL
RETSKP ;GOOD RETURN
;ROUTINE TO COPY CHECKPOINT ENTRY TO USAGE FILE
; T1/ PAGE IDENT
; T4/ ENTRY ADDRESS
USGUP0: CALL USGUPS ;Perform file update
SETOM 0(T4) ;SET ENTRY FREE
RET ;RETURN FROM USGUP0
; Subroutine to copy current checkpoint entry into USAGE file entry
USGUPS: SKIPGE 0(T4) ;ENTRY ACTIVE?
RET ;NO - NOTHING TO DO
MOVE T1,USGEOF ;GET CURRENT EOF
MOVEM T1,0(T4) ;SAVE IN CHECKPOINT
MOVE T1,USGJFN ;JFN FOR USAGE FILE
MOVEI T2,1(T4) ;ADDRS OF DATA
HRLI T2,(POINT 36,,) ;FORM BP
HRRZ T3,0(T2) ;GET LENGTH OF ITEM
ADDM T3,USGEOF ;UPDATE USAGE EOF POINTER
MOVNS T3 ;MAKE NEGATIVE
SOUT ;DUMP INTO FILE
ERCAL USGIOE ;REPORT IO ERROR
MOVE T1,USGEOF ;CALC PAGE JUST WRITTEN
LSH T1,-PGSFT
HRL T1,USGJFN ;FORM IDENT
MOVEI T2,1 ;DO ONE PAGE
UFPGS ;UPDATE FILE PAGE
ERCAL USGIOE ;REPORT FAILURE
RET ;Return from USGUPS
;IO ERROR IN USAGE FILE
USGIOE: MOVE T1,USGEOF ;REPORT BAD PAGE
LSH T1,-PGSFT
BUG (UXXWER,<<T1,D>>)
RET ;CONTINUE
;ROUTINE TO CREATE A CHECKPOINT FILE
CRCKPT: STKVAR <SCKJFN>
HRROI T2,CKPFIL
MOVX T1,GJ%SHT!GJ%PHY!GJ%NEW ;NEW ONLY
GTJFN
ERJMP [MOVX T1,GJ%SHT!GJ%PHY!GJ%DEL ;HANDLE CASE OF THE
HRROI T2,CKPFIL ; DELETED BUT NOT EXPUNGED FILE
GTJFN ; TO PREVENT UXXCKP BUGHLTS
ERJMP R ;NOT THAT CASE
HRLI T1,.FBCTL ;WORD IN FDB TO CHANGE
MOVX T2,FB%DEL ;TO UNDELETE FILE
SETZM T3 ;CLEAR DELETED BIT
CHFDB ;DO IT
ERJMP R ;FAILURE
HRRZS T1 ;CLEAR STUFF FROM LEFT HALF
JRST .+1] ;AND CONTINUE
MOVEM T1,SCKJFN ;SAVE FOR LATER
MOVX T2,44B5+OF%WR!OF%RD ;READ/WRITE
OPENF
RET ;FAILURE
CALL USGNOD ;SET NO-DUMP
NOINT ;APPEASE FREE SPACE ROUTINES
MOVEI T1,CKPSIZ ;ALLOCATE BUFFER
CALL ASGSWP ; FOR CHECKPOINT RECORD
RETBAD (,OKINT) ;NONE TO BE HAD
MOVE Q2,T1 ;SAVE BASE ADDRS
MOVEI Q1,NJOBS ;INIT FOR NUMBER OF JOBS
SETOM 0(Q2) ;-1 SHOWS FREE ENTRY
MOVEM Q1,1(Q2) ;STORE # OF JOBS IN JOB 0
CALL LGTAD
MOVEM T1,2(Q2) ;DATE/TIME OF LAST CHECKPOINT
MOVEI T1,CKPSIZ ;SIZE OF CHECKPOINT RECORD
MOVEM T1,3(Q2)
MOVE T1,SCKJFN ;GET JFN
HRLI Q2,(POINT 36,,) ;FORM BP
CRCKP1: MOVE T2,Q2 ;COPY BP
MOVNI T3,CKPSIZ ;SIZE OF ENTRY
SOUT ;WRITE IT
ERJMP [OKINT ;UNDO NOINT
RETBAD ()] ;AND GIVE ERROR
SOJG Q1,CRCKP1 ;LOOP OVER ALL JOBS
CLOSF ;CLOSE FILE
JFCL
HRRZ T1,Q2 ;ADDRS OF TEMP BLOCK
MOVEI T2,CKPSIZ ; ITS SIZE
CALL RELSWP ;RELEASE STORAGE
OKINT ;UNDO NOINT
RETSKP ;GOOD RETURN
;ROUTINE TO UPDATE CHECKPOINT PAGE AND UNMAP IT
UNMAPC: MOVEI T2,1 ;1 PAGES
SKIPE T1,CKPGID ;PAGE IDENT OF LAST PAGE MAPPED
UFPGS ;UPDATE ON DISK
JFCL ;WE TRIED
SETZB T1,CKPGID ;UNMAP PAGE, MARK NO PAGE MAPPED
MOVEI T2,FPG0A
CALLRET SETMPG ;...
;ROUTINE TO SET (MAP) CHECKPOINT FILE PAGE FOR JOB N
; T1/ JOB #
;RETURNS: T4/ ENTRY ADDRESS
; T1/ PAGE IDENT
USGSPG: IMULI T1,CKPSIZ ;CALC CHECKPOINT LOC
IDIVI T1,PGSIZ ;T1 := PAGE , T2 := LINE
PUSH P,T2 ;SAVE LINE
HRL T1,CKPJFN ;FORM JFN,,PN
MOVX T2,PM%RD!PM%WR ;READ/WRITE
CALL USGMAP
POP P,T4 ;RESTORE OFFSET
ADDI T4,FPG0A ;ADD IN BASE
RET ; AND RETURN
;ROUTINE TO SET FB%NOD (NODUMP) FOR FILE JFN IN T1
USGNOD: HRLI T1,.FBCTL ;SAY WORD 1
TXO T1,CF%NUD ;NO UPDATE DIRECTORY
MOVX T2,FB%NOD ;SET BIT AND MASK
MOVX T3,FB%NOD
CHFDB ;WRITE INTO FDB
HRRZS T1 ;RETURN JFN INTACT
RET
;ROUTINE TO MAP A PAGE OF A FILE INTO FPG0
;CALL: T1/ JFN,,PAGE#
; T2/ ACCESS BITS
USGMAP: CAMN A,CKPGID ;IS THIS PAGE ALREADY MAPPED?
RET ;YES-- RETURN NOW FROM USGMAP
PUSH P,T2 ;SAVE ACCESS INFO
PUSH P,T1 ;SAVE PAGE ID
MOVEI T2,1 ;ONE PAGE TO UPDATE
SKIPE T1,CKPGID ;GET CURRENT PAGE THAT'S MAPPED
UFPGS ;UPDATE IT
JFCL ;WE TRIED
POP P,T1 ;RESTORE PAGE IDENT
MOVEM T1,CKPGID ;REMEMBER NEW PAGE IDENT
CALL JFNOFN ;CONVERT TO OFN,,PN
BUG (UXXMAP)
POP P,T2 ;RESTORE ACCESS INFO
HRRI T2,FPG0A ;ADDRS TO MAP PAGE
CALLRET SETMPG ;MAP THE PAGE
;USAGE QUEUED MESSAGE HANDLER
USGMES: SAVEAC <Q1,Q2,FX> ;SAVE REGS
USGMS0: SKIPN Q1,USGBEG ;ANYTHING ON QUEUE?
RET ;NO - DONE
LOAD T1,UQFCN,(Q1) ;GET FCN CODE
CAILE T1,USGLGL ;CHECK VALID
USGBFC: BUG (UXXILL)
CALL @USGREQ(T1) ;DISPATCH
CALL OFFUSQ ;REMOVE FROM QUEUE
JRST USGMS0 ;LOOP TILL DONE
;DISPATCH TABLE
USGREQ: DTBDSP (USGENT) ;0 - WRITE ENTRY INTO FILE
DTBDSP (USGCLS) ;1 - CLOSE OUT FILE
DTBDSP (USGCKU) ;2 - CHECKUOINT
DTBDSP (USGLGI) ;3 - LOGIN
DTBDSP (USGLGO) ;4 - LOGOUT
DTBDSP (USGSEN) ;5 - SESSION ENTRY
DTBDSP (USGBFC) ;6 - ILLEGAL
DTBDSP (USGBFC) ;7 - ILLEGAL
DTBDSP (USGASU) ;10 - Accounting shift change
USGLGL==.-USGREQ-1
;JOB 0 ROUTINE TO PERFORM CHECKPOINT TIMING
CHKCKP: MOVE T1,TODCLK ;CURRENT TIME
CAMGE T1,CKPTIM ;TIME FOR CHECKPOINT?
RET ;NO - RETURN
SAVEAC <Q1,Q2,FX> ;SAVE REGS
MOVE T1,FACTSW ;CHECK IF ACCOUNTING
TXNE T1,SF%USG ;???
CALL USGCKP ;YES - CHECKPOINT ALL JOBS
MOVE T1,TODCLK ;RESET NEXT TIME
ADD T1,CKPINV ;ADD INTERVAL
MOVEM T1,CKPTIM ;SAVE NEW TIME
RET ;RETURN
;Job 0 routine to perform automatic accounting shift change
CHKASC: SKIPE T1,ASCTIM ;Get next accounting shift change time
CAMLE T1,TODCLK ;Time for change yet?
RET ;Not yet.
SAVEAC <Q1,Q2,FX> ;Need all the Q's for this...
MOVE T1,FACTSW ;Get current state bits
TXNE T1,SF%USG ;Doing accounting today?
CALL USGASC ;Yes-- perform accounting shift change
; CALLRET NXTASC ;Compute next time for change and return from CHKASC
; NXTASC - Compute next accounting shift change time
;
; Register usage in this routine:
; T1/ Current DOW/time table entry
; T2/ Time selected from table (-1 if none found yet)
; T3/ Bit for current DOW (day-of-week) being tested
; T4/ Current pointer to DOW/time table
; Q1/ Bit for DOW of today
; Q2/ Current time in seconds since midnight of the day being tested
; (will be negative if other than today)
; DOW/time table entry format:
; LH: Bit n on means that this entry valid on day-of-week (DOW) n
; (0=Monday)
; RH: Time-of-day when shift will occur on selected DOWs, in
; seconds since midnight.
NXTASC::
SAVEAC <Q1,Q2,FX> ;Need all the Q's
LOCK ASCLOK ;Lock time table database
MOVX T2,-1 ;Use current date/time
MOVX T4,0 ;No options
ODCNV ;Get time, day-of-week, etc.
ERJMP NXTAS7 ;No date/time-- set next time to never
HRRZ Q2,T4 ;Save the seconds since midnight now
MOVX Q1,1B0 ;Get first bit for Monday
MOVNI T1,(T3) ;Get -ve day of week (0=Monday)
LSH Q1,(T1) ;Get bit for this day of week in Q1
MOVE T3,Q1 ;Start testing at today's DOW
MOVX T2,^D<24*60*60> ;Indicate no time found yet
; Loop through table, once for each DOW in the future, until
; next accounting shift change time is found
NXTAS1: SKIPN T4,ASCPTR ;Get AOBJN pointer to DOW/time table
JRST NXTAS7 ;No table-- set next time to infinity
; Loop through table for this DOW to see if any changes this day
NXTAS2: MOVE T1,(T4) ;Get entry from table
TDNN T1,T3 ;Entry in effect this DOW?
JRST NXTAS3 ;No-- skip it
CAIGE Q2,(T1) ;Has the time for this change already past?
CAIG T2,(T1) ; or have we already found an earlier time?
JRST NXTAS3 ;Yes to either question-- skip entry
HRRZ T2,T1 ;Found a reasonable time-- remember it
NXTAS3: AOBJN T4,NXTAS2 ;Loop through whole table
CAIGE T2,^D<24*60*60> ;Find a valid entry?
JRST NXTAS8 ;Yes-- go compute time from now
; No time found this DOW-- step to next day in future and search table again
TDNE T3,Q1 ;Back to today?
JUMPL Q2,NXTAS7 ;Yes-- give up if not first time
SUBI Q2,^D<24*60*60> ;Step current time back another day
LSH T3,-1 ;Shift to next DOW
TXNE T3,1B7 ;Beyond Sunday?
MOVX T3,1B0 ;Yes-- reset back to Monday
JRST NXTAS1 ;Keep searching table
; No table or no entries with any DOW's-- set next time to infinity
NXTAS7: SETZ T2, ;Indicate no time set
JRST NXTAS9 ;Store and return
; Found next applicable table entry-- find out when the change should occur
NXTAS8: SUB T2,Q2 ;Compute seconds from now till
; when entry time will occur
IMULI T2,^D1000 ;Convert to TODCLK units of MS
ADD T2,TODCLK ;Compute TODCLK time when we will change
NXTAS9: MOVEM T2,ASCTIM ;Save next change time
UNLOCK ASCLOK ;Unlock ASCPTR database
RET ;Return from NXTASC
;WRITE ENTRY INTO FILE FROM QUEUE
USGENT: MOVE T1,USGJFN ;GET JFN
MOVEI T2,UQDAT(Q1) ;POINT TO DATA
HRLI T2,(POINT 36,,) ;FORM BP
HRRZ T3,UQDAT(Q1) ;GET LENGTH OF ITEM
ADDM T3,USGEOF ;UPDATE EOF POINTER
MOVNS T3 ;NEGATE
SOUT ;WRITE IN FILE
ERCAL USGIOE ;REPORT ERROR
MOVE T1,USGEOF ;CALC PAGE JUST WRITTEN
LSH T1,-PGSFT
HRL T1,USGJFN ;FORM IDENT
MOVEI T2,1 ;DO ONE PAGE
UFPGS ;UPDATE FILE PAGE
ERCAL USGIOE ;OH WELL...
RET ;DONE
;CLOSE OUT CURRENT FILE AND START A NEW ONE
USGCLS: STKVAR <NJFN>
CALL CRUSGF ;CREATE A NEW FILE
JRST [ BUG (UXXCL1)
RET] ;JUST EXIT - NOTHING DONE
HRROI T2,USGFIL ;NOW OPEN IT
CALL USGOPN
JRST [ BUG (UXXCL2)
RET] ;TOUGH AGAIN
MOVEM T1,NJFN ;SAVE NEW JFN
MOVE T1,USGJFN ;GET CURRENT JFN
HRLI T1,.FBCTL ;THIS WORD
TXO T1,CF%NUD ;DONT UPDATE DIR
MOVX T2,FB%NOD ;SET TO CLEAR THIS BIT
SETZ T3, ; TO ALLOW FILE TO DUMP
CHFDB
ERJMP .+1 ;WE TRIED
HRRZS T1 ;RESTORE JFN
CLOSF ;CLOSE OUT FILE
BUG (UXXCL3)
SETZM USGEOF ;SETUP FOR NEW FILE
MOVE T1,NJFN
MOVEM T1,USGJFN ;NOW HAVE NEW FILE TO USE
UNLOCK (USGLOK) ;UNLOCK WAITER
RET ;RETURN
;ROUTINE TO SET CHECKPOINT FROM QUEUE
;RETURNS: Q2/ PAGE IDENT
UCKSET: HRRZ T1,UQDAT+2(Q1) ;GET JOB #
CALL USGSPG ;SET CHECKPOINT PAGE
MOVE Q2,T1 ;SAVE IDENT
MOVEI T1,2(T4) ;SET FROM,,TO FOR CLEAR
HRLI T1,1(T4) ;...
SETZM 1(T4) ;ZERO FIRST WORD
BLT T1,CKPSIZ-1(T4) ;CLEAR
MOVEI T1,1(T4) ;POINT TO DESTINATION
HRLI T1,UQDAT(Q1) ; LHS := DATA
HRRZ T2,UQDAT(Q1) ;GET LENGTH
ADD T2,T4 ;LAST WORD OF XFER
BLT T1,0(T2) ;MOVE DATA
SETZM 0(T4) ;MARK ITEM INUSE
RET ;RETURN DONE
;HANDLE USAGE LOGIN
USGLGI: CALL UCKSET ;COPY DATA TO CHECKPOINT
CALLRET UNMAPC ;EXIT AND UNMAP PAGE
;HANDLE USAGE LOGOUT
USGLGO: CALL UCKSET ;COPY DATA TO CHECKPOINT
MOVE T1,Q2 ;SETUP IDENT
CALL USGUP0 ;UPDATE USAGE FILE (CLEAR CKPT)
CALLRET UNMAPC ;EXIT AND UNMAP PAGE
;HANDLE SESSION END
USGSEN: HRRZ T1,UQDAT+2(Q1) ;SETUP JOB NUMBER
CALL USGSPG ;MAP CHECKPOINT ENTRY
;**;[3127]ADD 2 LINES AT USGSEN: + 2L 20-JUN-84 TAB
MOVE T2,UQDAT+1(Q1) ;[3127]GET UHTAD (SESSION END)
MOVEM T2,2(T4) ;[3127]MOVE IT TO CHECKPOINT RECORD
PUSH P,T4 ;SAVE ADDRS
HRRZ T3,1(T4) ;CALC POINTER TO CHECKPOINT DATA
ADDI T3,CKOFF(T4)
HRRZ T2,UQDAT(Q1) ;CALC POINTER INTO QUEUE ENTRY
ADDI T2,CKOFF+1(Q1) ; FOR CKPT DATA
;**;[3127]ADD 2 LINES AT USGSEN: + 7L 20-JUN-84 TAB
MOVE T4,0(T2) ;[3127]UPDATE CHECKPOINT FILE
MOVEM T4,0(T3) ;[3127] SESSION START TIME
MOVE T4,1(T2) ;UPDATE CHECKPOINT FILE
MOVEM T4,1(T3) ; DATA FOR RUNTIME AND
MOVE T4,2(T2) ; CONSOLE CONNECT TIME
MOVEM T4,2(T3)
POP P,T4 ;RESTORE ADDRS
CALL USGUP0 ;MERGE INTO USAGE FILE(T1 AND T4 SETUP)
CALL UCKSET ;COPY NEW CHECKPOINT INFO
HRRZ T1,1(T4) ;NOW SETUP TO CLEAR CHECKPOINT
ADDI T1,CKOFF(T4)
SETZM 1(T1) ;DATA FOR RUTIME AND CONNECT
SETZM 2(T1) ;...
;**;[3127]ADD 2 LINES AT CPOINT: - 5L 20-JUN-84 TAB
MOVE T2,UQDAT+1(Q1) ;[3127]GET UHTAD, TIME OF SESSION CHANGE
MOVEM T2,0(T1) ;[3127]SETUP AS SESSION START TIME
CALLRET UNMAPC ;UNMAP CHECKPOINT PAGE
;ROUTINE TO UPDATE CHECKPOINT ENTRY FOR A SINGLE JOB
; T1/ JOB NUMBER
CPOINT: SETZM ASCFLG ;Don't perform accounting shift change
CPONT0: SAVEAC <Q1,Q2,FX> ;SAVE REGS
STKVAR <PGID,CPAD,CPIP> ;Page ident, chekpoint address,
; checkpoint item AOBJN pointer
MOVE Q1,T1 ;SAVE JOB # IN Q1
CALL USGSPG ;SET CHECKPOINT PAGE
MOVEM T1,PGID ;Save checkpoint page address in PGID
MOVEM T4,CPAD ;Save address within page in CPAD
HRRZ FX,1(T4) ;GET LENGTH OF ENTRY
ADDI FX,CKOFF(T4) ;POINT TO CHECKPOINT DATA
HRLI FX,-CKITMS ;FORM AOBJN PNTR
MOVEM FX,CPIP ;Save checkpoint item pointer
CALL LGTAD ;GET CURRENT DATE/TIME
MOVEM T1,2(T4) ; INTO CHECKPOINT RECORD
MOVE T1,Q1 ;JOB #
NOSKED ;DO THIS NOSKED
SKIPN JOBDIR(T1) ;JOB LOGGED IN?
JRST [ OKSKED ;NO - JUST RETURN
JRST CPNT3]
CALL SETJSB ;MAP JSB FOR JOB
OKSKED ;JOB IS NOW FIXED IN MY MAP
MOVE T3,T1 ;SAVE PNTR IN T3
MOVEI Q2,0 ;INIT INDEX TO 0
CPNT1: XCT CPTBL(Q2) ;FETCH WORD
MOVEM T1,0(FX) ;STORE
AOS Q2 ;STEP TO NEXT TABLE ENTRY
AOBJN FX,CPNT1
SKIPN ASCFLG ;This accounting shift change also?
JRST CPNT2 ;No-- go on
; Accounting shift change-- update USAGE file
MOVE T1,PGID ;Get page ident
MOVE T4,CPAD ;Address within page
PUSH P,T3 ;Save JSB pointer
CALL USGUPS ;Make new USAGE entry
SETZM 0(T4) ;Indicate checkpoint entry still in use
POP P,T3 ;Restore JSB pointer
; Reset job statistics and set new checkpoint entry
MOVE FX,CPIP ;Get checkpoint item pointer
MOVEI Q2,0 ;INIT INDEX TO 0
CPNT11: MOVE T1,0(FX) ;Get old value
XCT SETBL(Q2) ;Reset current value of data item
XCT CPTBL(Q2) ;Get new value of data item
MOVEM T1,0(FX) ;STORE
AOS Q2 ;STEP TO NEXT TABLE ENTRY
AOBJN FX,CPNT11
CPNT2: CALL CLRJSB ;UNMAP JSB
CPNT3: RET ;RETURN FROM CPOINT
;CHECKPOINT DATA TABLE
CPTBL: MOVE T1,CTIMON(T3) ;(0) SESSION START TIME
CALL CPGCON ;(1) GET CONNECT TIME
CALL CPGRTM ;(2) JOB RUN TIME
;Checkpoint data routines
CPGCON: MOVE T1,TODCLK ;CURRENT DATE/TIME
SUB T1,CONSTO(T3) ; LESS START TIME
SUB T1,JSSCTM(T3) ; from start of session
RET ;GIVES CONNECT TIME
CPGRTM: MOVE T1,JOBRT(Q1) ;Get job runtime
SUB T1,JSSRTM(T3) ; from start of session
RET ;Return from CPGRTM
;Session End data table
SETBL: CALL SESCTI ;(0) Date/time of session start
ADDM T1,JSSCTM(T3) ;(1) Console time start of session
ADDM T1,JSSRTM(T3) ;(2) Runtime start of session
;Session End data routines
SESCTI: CALL LGTAD ;Get current date/time
MOVEM T1,CTIMON(T3) ;Set start of new session
RET ;Return from SESCTI
;PERFORM CHECKPOINT OVER ALL JOBS
USGCKU: CALL USGCKP ;DO WORK
JRST USGULR ;Unlock waiter and return
;Perform accounting shift change
USGASU: CALL USGASC ;Do work
USGULR: UNLOCK (USGLOK) ;UNLOCK WAITER
RET ;RETURN
;Internal routine to perform checkpoint of all jobs
; or accounting shift change
USGCKP: SETZM ASCFLG ;Note not accounting shift change
JRST USGC00 ;Continue
USGASC: SETOM ASCFLG ;Note accounting shift change
USGC00: MOVEI Q1,NJOBS-1 ;MAX JOBS TO DO
; Loop over all active jobs
USGCK0: SKIPN JOBDIR(Q1) ;JOB EXIST AND IS LOGGED IN?
JRST USGCK1 ;NO - STEP TO NEXT
MOVE T1,Q1 ;COPY JOB #
CALL CPONT0 ;CHECKPOINT ONE JOB
USGCK1: SOJG Q1,USGCK0 ;LOOP OVER ALL
MOVEI T1,0 ;MAP JOB 0 ENTRY
CALL USGSPG ;...
MOVE Q1,T4 ;POINTER TO ENTRY
MOVE Q2,T1 ;PAGE IDENT
CALL LGTAD ;GET CURRENT DATE/TIME
MOVEM T1,2(Q1) ;UPDATE DATE/TIME OF CKPOINT
MOVE T1,Q2 ;UNMAP PAGE
CALLRET UNMAPC ; AND EXIT
RESCD
TNXEND
END