Trailing-Edge
-
PDP-10 Archives
-
BB-LW55A-BM_1988
-
galaxy-sources/lptmac.mac
There are 22 other files named lptmac.mac in the archive. Click here to see a list.
UNIVER LPTMAC - Parameter File for LPTSPL
SUBTTL Preliminaries
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SEARCH GALCNF ;GET CONFIGURATION DATA
SEARCH GLXMAC ;SEARCH GALAXY PARAMETERS
SEARCH MONSYM,MACSYM ;SEARCH THE MONITOR SYMBOLS
SEARCH QSRMAC ;SEARCH QUASAR PARAMETERS
SEARCH ORNMAC ;SEARCH ORION/OPR PARAMETERS
IFN FTDN60,<
SEARCH D60UNV ;GET IBMCOM UNIVERSAL
>
IF1,<PRINTX BUILDING A GALAXY-20 LPTMAC>
SALL ;SUPPRESS MACRO EXPANSIONS
LMCMAN==:0 ;MAINTENANCE EDIT NUMBER
LMCDEV==:12 ;Development edit number
VERSIN (LMC) ;GENERATE EDIT NUMBER
LMCWHO==0 ;WHO LAST PATCHED
LMCVER==6 ;MAJOR VERSION NUMBER
LMCMIN==0 ;MINOR VERSION NUMBER
ND FTACNT,-1 ;TURN ON ACCOUNTING
IFN FTACNT,<SEARCH ACTSYM ;SEARCH THE ACCOUNTING UNIVERSAL
>
DEFINE FACT,<IFN FTFACT>
Subttl Table of Contents
; Table of Contents for LPTMAC
;
; Section Page
;
;
; 1. Revision History . . . . . . . . . . . . . . . . . . . 4
; 2. AC and System Parameter Definitions . . . . . . . . . 5
; 3. Parameters . . . . . . . . . . . . . . . . . . . . . . 6
; 4. Flag Definitions . . . . . . . . . . . . . . . . . . . 7
; 5. Macros . . . . . . . . . . . . . . . . . . . . . . . . 8
; 6. Job Parameter Area . . . . . . . . . . . . . . . . . . 10
; 7. Scheduler Parameters . . . . . . . . . . . . . . . . . 16
; 8. Listener Data Base Definitions . . . . . . . . . . . . 17
; 9. End of LPTMAC . . . . . . . . . . . . . . . . . . . . 20
SUBTTL Revision History
COMMENT \
***** Release 6.0 -- begin development edits *****
1 6.1003 5-Oct-87
Create LPTMAC as the universal file for LPTSPL
2 6.1036 23-Oct-87
Add some flags for S that tell us what spoooler we are today
3 6.1050 3-Nov-87
Define LPTTYP as the LPT type mask in the AC S status register.
Define J$LPGS which contains the address of the first of the
listener's data pages.
4 6.1055 3-Nov-87
Remove the DECnet message checksumming option word CHSUMO.
5 6.1061 6-Nov-87
Define sysmols related to TTY and LAT terminal printer support.
6 6.1074 13-Nov-87
MSBSIZ is too small for DQS LPTSPL status messages.
7 6.1090 20-Nov-87
Shorten DECnet timeout to 15 minutes.
10 6.1215 4-Mar-88
Define blocks J$SDBW and .LSDBW for private GALAXY SRV: and DCN:
device name.
11 6.1220 6-Mar-88
Add definitions J$FADR, J$FILO and J$OADR in support of inaccessible
files for cluster printing.
12 6.1225 8-Mar-88
Update copyright notice.
\ ;End of revision history
SUBTTL AC and System Parameter Definitions
;ACCUMULATOR DEFINITIONS
M==12 ;IPCF MESSAGE ADDRESS
S==13 ;STATUS FLAGS
E==14 ;POINTS TO CURRENT FILE
J==15 ;JOB CONTEXT POINTER
LIS==15 ;LISTENER DATA BASE ADDRESS
C==16 ;HOLDS A CHARACTER - ALMOST NEVER PRESERVED
;[2] Operating System dependent parameters
SYSPRM .MOEOF,16,.MOEOF
SYSPRM ERRVFU,DF.LVE,MO%LVF
SYSPRM BUFNUM,4,1 ;NUMBER OF BUFFERS
SYSPRM BUFSIZ,<1000/BUFNUM>,<1000/BUFNUM>
;SIZE OF EACH BUFFER
SYSPRM BUFCHR,<<BUFSIZ-3>*5>,<BUFSIZ*4>
;NUMBER OF CHARS PER BUFFER
SYSPRM NPRINT,17,1 ;NUMBER OF DEVICES THIS SPOOLER HANDLES
SYSPRM (STRNUM,^D10,NPRINT) ;NUMBER OF STRS MAXIMUM
STRLEN==2*STRNUM ;LENGTH OF STRUCTURE TABLE
SYSPRM (STRSLS,<.FSDSO+<3*STRNUM>+3>,5) ;SIZE OF SEARCH LIST BLOCK
SYSPRM RAMNOR,SIXBIT/LP96/,SIXBIT/LP96/
SYSPRM SERFLG,0,0 ;SYSERR flag -- 0=no entries to be made
SYSPRM NBRRT,2,2 ;Non-blocking rest time
SYSPRM DOLRT,10,10 ;Device off-line rest time
SYSPRM CONRT,3,3 ;Console rest time
SYSPRM NENBR,25,25 ;# of errors allowed for NBR return
; when shutting down
SUBTTL Parameters
;PARAMETERS WHICH MAY BE CHANGED AT ASSEMBLY TIME
ND PDSIZE,120 ;SIZE OF PUSHDOWN LIST
ND LPTERR,2 ;NUMBER OF LPT I/O ERRS BEFORE QUITTING
ND LOGPAG,12 ;PAGE LIMIT FOR LOG IF OVER QUOTA
ND CKPTIM,^D60 ;# of seconds between checkpoints
ND LPTBAN,2 ;Default number of banner pages
ND LPTTRL,2 ;Default number of trailer pages
ND LPTHDR,2 ;Default number of header pages
ND FRWSKP,5 ;DSCHD every n pages when forwardspacing
ND CHKWGT,4 ;Weight used in eol checking
ND MINTIM,5 ;TIME TO WAIT BETWEEN CONNECTION ATTEMPTS
ND MAXTIM,5*^D60 ;MAXIMUM TIME BETWEEN CONNECTION ATTEMPTS
ND MAXFAI,^D10 ;MAXIMUM NUMBER OF CONNECTION FAILURES/JOB
ND MAXCRH,^D10 ;MAXIMUM NUMBER OF TIMES LISTENER CAN CRASH
ND TIMITL,3*^D60*^D15 ;[7] DECnet inactiviy time limit
ND FILBUF,1 ;SIZE OF THE FILE TRANSFER BUFFER
ND DBSIZ,2 ;SIZE OF THE LISTENER DATA BASE
;CONSTANT PARAMETERS
XP MSBSIZ,50 ;[6] Size of a message block
XP AFDSIZ,10 ;ALIGN FILE FD SIZE.
;CHECKPOINT BLOCK OFFSETS
XP CKFIL,0 ;NUMBER OF FILES PRINTED
XP CKCOP,1 ;NUMBER OF COPIES OF LAST FILE
XP CKPAG,2 ;NUMBER OF PAGES OF LAST COPY
XP CKTPP,3 ;TOTAL PAGES PRINTED
XP CKFLG,4 ;FLAGS
XP CKFREQ,1B0 ;JOB WAS REQUEUED BY OPR
XP CKFCHK,1B1 ;JOB WAS CHECKPOINTED
SUBTTL Flag Definitions
;Flag bits in AC S. The first few are defined in QSRMAC in the SETUP message
;definitons.
;LH bits are normally checked together, and they are the LPTSPL status and
;LPTSPL mode bits.
; SUFSHT==1B0 ;[2] (shutdown bit - do not use)
; SPLTAP==1B1 ;[2] A local LPTSPL spooling to tape
; LOCSPL==1B2 ;[2] A local LPTSPL
; CLUSPL==1B3 ;[2] A Cluster LPTSPL
; DQSSPL==1B4 ;[2] A DQS LPTSPL
; LATSPL==1B5 ;[2] A LAT LPTSPL
; TTYSPL==1B6 ;[2] A Terminal LPTSPL (TTYSPL)
D60SPL==1B7 ;[2] DN60/IBM LPTSPL
LPTTYP==177B7 ;[3]LPT TYPE MASK
;[2] B8-B13 free
RQB==1B14 ;[2] Job has been requed
ABORT==1B15 ;[2] The ship is sinking
GOODBY==1B16 ;[2] In job termination sequence
INJOB==1B17 ;[2] In a print job (checkpoints done)
;RH bits normally are chacked together (job/file status bits)
;[2] B18-20 free
FCONV==1B20 ;[2] Next char fortran format data
ARROW==1B21 ;[2] Arrow mode in effect
SUPFIL==1B22 ;[2] No user form control
SUPJOB==1B23 ;[2] SUPPRESS /JOB
LFTMAR==1B24 ;[2] End of line found indicator
NEWLIN==1B25 ;[2] Flag for the begining of line
SKPFIL==1B26 ;[2] Skip future copies of this file completely
FBPTOV==1B27 ;[2] Spacing page table overflow
FORWRD==1B28 ;[2] Forward spacing request in progress.
INTRPT==1B29 ;[2] Stream is connected to the interrupt system
BCKFIL==1B30 ;[2] Request was backspaced 1 file
BANHDR==1B31 ;[2] Printing banner/header pages
VFULOD==1B32 ;[2] VFU load is in progress
FRMFND==1B33 ;[2] No such forms in LPFORM.INI
TEMFIL==1B34 ;[2] Temporary files are being created
WAITIR==1B35 ;[2] Wait for interrupt message response
SUBTTL Macros
DEFINE LP(SYM,VAL,FLAG),<
IF1,<
XLIST
IFNDEF J...X,<J...X==1000>
IFDEF SYM,<PRINTX ?PARAM SYM USED TWICE>
SYM==J...X
J...X==J...X+VAL
IFNDEF ...BP,<...BP==1B0>
IFNDEF ...WP,<...WP==0>
REPEAT VAL,<
IFIDN <FLAG><Z>,<LPZ(\...WP,...BP)>
...BP==...BP_<-1>
IFE ...BP,<
...BP==1B0
...WP==...WP+1
> ;;END IFE ...BP
> ;;END REPEAT VAL
LIST
SALL
> ;END IF1
IF2,<
.XCREF
J...X==SYM
.CREF
SYM==J...X
> ;END IF2
> ;END DEFINE LP
DEFINE LPZ(A,B),<
IFNDEF ...Z'A,<...Z'A==B>
IFDEF ...Z'A,<...Z'A==...Z'A!B>
> ;END DEFINE LPZ
;Continued on next page
;Continued from previous page
DEFINE F,<
FF BANNER,LPTBAN
FF TRAILER,LPTTRL
FF HEADER,LPTHDR
FF LINES,^D60
FF WIDTH,^D132
FF ALIGN,0
FF ALCNT,5
FF ALSLP,7
FF RIBBON,FRMNOR
FF TAPE,FRMNOR
FF VFU,FRMNOR
FF DRUM,FRMNOR
FF CHAIN,FRMNOR
FF NOTE,0
FF RAM,-1
FF NUMBER,0 ;;[2]
>
SUBTTL Job Parameter Area
$TDCHR==:0 ;TERMINAL CHARACTERISTIC
$TDTYP==:1 ;TERMINAL TYPE
$TDMOD==:2 ;JFN MODE WORD
$TDCC1==:3 ;CCOC WORD 1
$TDCC2==:4 ;CCOC WORD 2
$TDFLG==:5 ;FLAGS
$TDPOL==:6 ;POLLING CHARACTERS F.I. ETX,,ACK
$TDUNU==:7 ;1 WORD RESERVED FOR FUTURE EXPANSION
$TDLEN==:10 ;SIZE OF THE BLOCK
FL$XOF==:1B0 ;XON/XOF PROTOCOL
FL$POL==:1B1 ;POLLING PROTOCOL
FL$FUL==:1B2 ;FULL HEADERS,BANNERS,TRAILERS
FL$VFU==:1B3 ;PROGRAMMABLE TERMINAL (LIKE VFU)
FL$PGM==:1B4 ;FORCED VFU RELOAD BEFORE EACH FILE
LP J$$BEG,0 ;BEGINNING OF PARAMETER AREA
;REQUEST PARAMETERS
LP J$RFLN,1 ;NUMBER OF FILES IN REQUEST
LP J$RLIM,1,Z ;JOB LIMIT IN PAGES
LP J$RTIM,1 ;START TIME OF JOB
LP J$RLFS,1,Z ;ADR OF LOG FILE SPEC
LP J$RNFP,1,Z ;NUMBER OF FILES PRINTED
LP J$RNCP,1,Z ;NUMBER OF COPIES OF CURRENT FILE
LP J$RNPP,1,Z ;NUMBER OF PAGES IN CURRENT COPY PRINTED
LP J$RACS,20 ;CONTEXT ACS
LP J$RPDL,PDSIZE ;CONTEXT PUSHDOWN LIST
;LPT PARAMETERS
LP J$LBUF,1 ;ADDRESS OF LPT BUFFER
LP J$LBFR,PAGSIZ ;LINE PRINTER BUFFER
LP J$LBRH,1 ;BUFFER RING HEADER
LP J$LBPT,1 ;BYTE POINTER
LP J$LBCT,1 ;BYTE COUNT
LP J$LDEV,1 ;ACTUAL OUTPUT DEVICE NAME
LP J$LERR,1 ;LPT ERROR DOWNCOUNTER
LP J$LRAM,1 ;DEFAULT RAM FILE NAME (LP64 or LP96)
LP J$LLCL,1 ;-1 IF UPPER/LOWER CASE PRINTER
LP J$LDVF,1 ;-1 IF DAVFU ON PRINTER
LP J$LPCR,1 ;-1 IF DEVICE HAS A PAGE CNTR
LP J$LREM,1 ;TYPE OF LPTSPL
; 0 = LOCAL LPT
.JDN60==1B35 ; 1 = DN60 LPT
.JREML==1B0 ; < 0 = REMOTE LPT
.JLCLU==1B34 ;[2] Cluster lpt
.JLDQS==1B33 ;[2] DQS LPT
.JLLAT==1B32 ;[2] LAT LPT
;Continued on next page
;Continued from previous page
;DN60/IBM parameters
IFN FTDN60,<
LP J$DCND,CN$SIZ ;DN60 LINE CONDITIONING BLOCK
LP J$CWKT,1 ;DN60 console wake-up time
LP J$ENBR,1 ;Threshold for NBR returns
LP J$EDOL,1 ;Threshold for DOL returns
LP J$D6ER,1 ;Last DN60 error
LP J$OMSG,1,Z ;DN60 OPERATOR MESSAGE AVAILABLE FLAG
;On(-1) if have a message or if message
;not completed
LP J$D6OB,OP$SIZ ;Parameter block for D60OPN
> ;End of IFN FTDN60
LP J$DFLG,1 ;DN60 FLAG WORD
LP J$D6OP,1 ;DN60 OPERATOR CONSOLE ID
LP J$LINK,1 ;DN60 OPERATORS MSG LIST ID
LP J$OFLN,1 ;DN60 PRINTER IS OFFLINE FLAG
LP J$LCLS,1 ;LPT CONTROLLER CLASS
LP J$LIOA,1 ;-1 IF WE ARE IN A SOUT OR OUT
LP J$LLPT,1 ;-1 IF DEVICE REALLY IS A LPT
LP J$LIOS,1 ;LPT IO ERROR STATUS
LP J$MTAP,1 ;SIXBIT MAG TAPE DEVICE NAME
LP J$LCHN,1 ;LPT I/O CHANNEL
LP J$LBTZ,1 ;LPT OUTPUT BYTE SIZE
LP J$LSTG,2 ;DEVICE NAME STRING
LP J$LIBC,1 ;INITIAL BYTE COUNT
LP J$LIBP,1 ;INITIAL BYTE POINTER
LP J$TTYC,1 ;[5]TERMINAL CHARACTERISTIC
LP J$TDEV,1 ;[5]DEVICE DESIGNATOR IF OUTPUT TO TTY
LP J$VJFN,1 ;[5]"VFU" FILE JFN IF OUTPUT TO TTY
LP J$TCHR,$TDLEN ;[5]TERMINAL CHARACTERISTICS BLOCK
LP J$CID,1 ;[5]LATOP RETURNED CONNECTION-ID
LP J$SERN,2 ;[5]ASCIZ SERVER NAME BLOCK
;Continued on next page
;Continued from previous page
;CURRENT FORMS PARAMETERS
DEFINE FF(X,Y),<
LP J$F'X,1
>
LP J$FCUR,0 ;START OF FORMS PARAMS
F ;CURRENT FORMS PARAMS
LP J$FORM,1 ;CURRENT FORMS TYPE
LP J$FPFM,1 ;PREVIOUS FORMS TYPE
LP J$PDRU,1 ;PREVIOUS LOADED DRUM
LP J$PRIB,1 ;PREVIOUS LOADED RIBBON
LP J$PTAP,1 ;PREVIOUS LOADED CARRAIGE CONTROL TAPE
LP J$FMSP,1,Z ;FORMS WTO/WTOR PAGE ADDRESS
LP J$FWCL,1 ;CURRENT WIDTH CLASS
LP J$FLCL,1 ;Current length class
LP J$FLVT,1 ;CURRENTLY 'LOADED' VFU TYPE
LP J$FLRM,1 ;CURRENTLY 'LOADED' TRANSLATION RAM
LP J$FVIF,1 ;IFN OF VFU FILE ON -10
LP J$FBYT,1,Z ;VFU INPUT BYTE COUNT.
LP J$FPTR,1 ;VFU INPUT BYTE POINTER.
LP J$LVFF,1 ;FIRST TIME THROUGH FLAG FOR LPT VFU'S
LP J$FNBK,16 ;OPERATOR NOTE BLOCK
LP J$WITH,1 ;Number of bytes to check for eol
LP J$PRNT,1 ;Counter used in checking for eol
LP J$OPRA,1,Z ;Flag if cancel from operator
IF2,< PURGE J$FVFU,J$FCHA ;DON'T USE THESE >
;Continued on next page
;Continued from previous page
;ALIGN FILE PARAMETERS
LP J$APRG,1 ;-1 IF ALIGN IS IN PROGRESS
LP J$AIFN,1 ;ALIGN FILE IFN
LP J$ABYT,1 ;ALIGN BUFFER BYTE COUNT.
LP J$APTR,1 ;ALIGN BUFFER BYTE POINTER.
LP J$ASLP,1,Z ;SECONDS TO SLEEP
LP J$ACNT,1,Z ;LOOP COUNT
LP J$AFD,AFDSIZ ;THE FD FOR THE ALIGN FILE
;MISCELLANY
LP J$XTOP,1 ;WE ARE AT TOP OF FORM
LP J$XFOB,FOB.SZ ;A FILE OPEN BLOCK
LP J$XPOS,1 ;CURRENT VERTICAL POSITION
LP J$XHBF,<45> ;BUFFER TO BUILD HEADER LINE
LP J$XCOD,<^D55> ;COMPILE A ROUTINE TO CHECK
; FOR MATCH ON /REPORT
LP J$XFRC,1 ;FORTRAN CHARACTER REPEAT COUNT
LP J$XTBF,50 ;$TEXT BUFFER FOR OUTPUT DEVICE
LP J$XTBP,1 ;BYTE POINTER FOR J$XTBF.
LP J$RESP,2,Z ;OPERATOR RESPONSE BUFFER.
LP J$WTOR,^D50 ;WTOR MESSAGE BUFFER.
;Continued on next page
;Continued from previous page
;Cluster and DQS LPTSPL
LP J$CDCN,^D19 ;DCN: DECNET DEVICE NAME
LP J$RNOD,1 ;REMOTE NODE NAME
LP J$NDAT,3 ;OCTAL DATA FOR LINK CONFIRMATION
LP J$SDBW,8 ;[10]DEBUGGING USER NAME
LP J$FILB,1 ;PAGE # OF FILE TRANSFER BUFFER
LP J$FADR,1 ;[11]ADDRESS OF FILE TRANSFER BUFFER
LP J$FILO,1 ;[11]PAGE # OF OUTPUT FILE XFER BUFFER
LP J$OADR,1 ;[11]ADR OF OUTPUT FILE XFER BUFFER
LP J$LSTS,1 ;STATUS OF THE DECNET LINK
LP J$FRKH,1 ;LISTENER FORK HANDLE
LP J$ACCT,1 ;ACCOUNTING ENABLED/DISABLE FLAG
ERSTSZ==^D99 ;MAXIMUM ASCIZ ERROR TEXT LENGTH
LP J$ERRA,1 ;ERROR TEXT ADDRESS
LP J$LPTS,1 ;LPTSPL SIZE IN PAGES
LP J$TEVT,^D<.TIMPC+1> ;DECNET INACTIVITY ENTRY
LP J$STAT,1 ;STATE OF CLUSTER LPTSPL
VALMIN==1 ;MINIMUM VALID STATE VALUE
.JSNMR==1B1 ;NEXTJOB MESSAGE RESPONSE
.JSTMR==1B2 ;TRANSFER FILE MESSAGE RESPONSE
VALMAX==2 ;MAXIMUM VALID STATE VALUE
LP J$CONF,1 ;DECNET CONNECTION FAILURES
LP J$DECR,2 ;DECNET MESSAGE RESPONSE POINTER
J$DECS==J$DECR+1 ;DECNET MESSAGE SEND POINTER
LP J$JFN,1 ;JFN OF A FILE TO TRANSFER
LP J$TEM,1 ;JFN OF A TEMPORARY FILE
LP J$FDB,2 ;FILE I/O AND NUMBER OF BYTES FILE
LP J$SIXB,1 ;SIXBIT PART OF TEMP FILE NAME
LP J$FDHR,^D15 ;TEMPORARY FILE'S FD
J$TNAM==J$FDHR+1 ;TEMPORARY FILE'S FILE SPEC
LP J$TNUM,1 ;NUMBER OF TEMPORARY FILES
TFNLEN==^D70 ;TEMPORARY FILE NAMES TABLE LENGTH
LP J$TFIN,TFNLEN ;TEMPORARY FILE NAMES TABLE
LP J$ORFD,1 ;ORIGINAL FILE FD
LP J$REMR,1 ;PRINT REQUEST ORIGINATED REMOTELY
LP J$TFIL,1 ;CURRENT FILE IS A TEMPORARY FILE
LP J$RCSM,1 ;TRANSFER FILE MESSAGE CHECKSUM VALUE
LP J$CRNM,1 ;NUMBER OF TIMES LISTENER HAS CRASHED
LP J$LPGS,1 ;[3]ADDRESS OF LISTENER'S DATA PAGES
;Continued on next page
;Continued from previous page
;ACCOUNTING PARAMETERS.
LP J$APRT,1,Z ;PAGE COUNT.
LP J$ADRD,1,Z ;DISK BLOCKS READ.
LP J$APRI,1,Z ;JOBS PRIORITY
LP J$ARTM,1,Z ;JOBS RUN TIME (CPU)
LP J$ASEQ,1,Z ;JOBS SEQUENCE NUMBER
LP J$AFXC,1,Z ;TOTAL FILES PRINTED (FILES*COPIES)
;FORWARD SPACE / BACK SPACE PARAMETERS
LP J$FBPT,1 ;CURRENT PAGE TABLE POSITION
LP J$FPAG,PAGSIZ ;BACKSPACE PAGE TABLE
LP J$FCBC,1,Z ;CURRENT INPUT BUFFER BYTE COUNT
LP J$FTBC,1,Z ;TOTAL INPUT BYTE COUNT
LP J$FPIG,1,Z ;NUMBER OF PAGES TO IGNORE
;DISK FILE PARAMETERS
LP J$DIFN,1 ;THE IFN
LP J$DFDA,1 ;THE FD ADDRESS
LP J$DBPT,1 ;BUFFER BYTE POINTER
LP J$DBCT,1,Z ;BUFFER BYTE COUNT
;LOG FILE PARAMETERS
LP J$GBUF,^D10 ;ADDRESS OF LOG FILE BUFFERS
LP J$GBFR,PAGSIZ ;FIRST LOG FILE BUFFER
LP J$GNLN,1,Z ;NUMBER OF LINES WRITTEN IN LOG
LP J$GIBC,1,Z ;INTERNAL LOG BYTE COUNT
LP J$GIBP,1,Z ;INTERNAL LOG BYTE POINTER
LP J$GINP,1,Z ;NUMBER OF INTERNAL LOG PAGES
;PICTURE BLOCKS
LP J$PUSR,10 ;USER NAME
LP J$PNOT,4 ;/NOTE
LP J$PFL1,10 ;FIRST LINE OF FILE NAME
LP J$PFL2,12 ;SECOND LINE OF FILE NAME
LP J$PFLS,1 ;BLOCKSIZE FOR FILENAME
LP J$$END,1 ;END OF PARAMETER AREA
J$$LEN==J$$END-J$$BEG ;LENGTH OF PARAMETER AREA
SUBTTL Scheduler Parameters
;SCHEDULER FLAGS
PSF%OB==1B1 ;OUTPUT BLOCKED
PSF%DO==1B2 ;DEVICE IS OFF-LINE
PSF%ST==1B3 ;STOPPED BY OPERATOR
PSF%OR==1B4 ;OPERATOR RESPONSE WAIT
PSF%AL==1B5 ;ALIGNMENT TIMER WAIT STATE.
PSF%OO==1B6 ;WAITING FOR 2780/3780 OPERATOR OUTPUT
DEFINE $DSCHD(FLAGS),<
PUSHJ P,DSCHD
XLIST
JUMP [EXP FLAGS]
LIST
SALL
> ;END DEFINE $DSCHD
DEFINE $D60ER(ADD),<
PUSHJ P,D60ER
XLIST
JUMP ADD
LIST
SALL
> ;END DEFINE $D60ER
DEFINE $D60OE(ADD),<
PUSHJ P,D60OE
XLIST
JUMP ADD
LIST
SALL
> ;END DEFINE $D60OE
SUBTTL Listener Data Base Definitions
;The listener has a two page listener block. The first page has the following
;format:
;
; !=======================================================!
; ! Message Buffer Address ! .LSMSG
; !-------------------------------------------------------!
; ! SIXBIT Remote Node Name ! .LSNME
; !-------------------------------------------------------!
; ! !
; / ASCIZ Remote Node Name / .LSANN
; ! !
; !-------------------------------------------------------!
; ! !
; / /
; / Remote Sender Name / .LSUSR
; / /
; ! !
; !-------------------------------------------------------!
; ! !
; / /
; / Expected Remote Sender Name / .LSSNE
; / /
; ! !
; !-------------------------------------------------------!
; ! !
; / /
; / Remote Sender Optional Data / .LSOPT
; / /
; ! !
; !-------------------------------------------------------!
; ! DECnet Link Status ! .LSLNK
; !-------------------------------------------------------!
; ! !
; / /
; / Listener Stack / .LSPDL
; / /
; ! !
; !-------------------------------------------------------!
; ! !
; / /
; / Listener ACs / .LSACS
; / /
; ! !
; !-------------------------------------------------------!
; ! Listener's Fork Handle ! .LSHND
; !-------------------------------------------------------!
; ! DECnet Link JFN ! .LSJFN
; !-------------------------------------------------------!
;Continued on the next page
;Continued from the previous page
; !-------------------------------------------------------!
; ! !
; / /
; / Listener's DECnet Device Name (SRV:) / .LSSRV
; / /
; ! !
; !-------------------------------------------------------!
; ! !
; / /
; / Debugging User Name / .LSDBW
; / /
; ! /
; !-------------------------------------------------------!
; ! !
; / /
; / GLXLIB Initialization Block / .LSIBK
; / /
; ! !
; !-------------------------------------------------------!
; ! !
; / /
; / PID Initialization Block / .LSPIB
; / /
; ! !
; !-------------------------------------------------------!
; ! !
; / Interrupt Level Table / .LSLEV
; ! !
; !-------------------------------------------------------!
; ! Interrupt Level 1 PC Save Block ! .LS1PC
; !-------------------------------------------------------!
; ! Interrupt Level 2 PC Save Block ! .LS2PC
; !-------------------------------------------------------!
; ! Interrupt Level 3 PC Save Block ! .LS3PC
; !-------------------------------------------------------!
; ! !
; / /
; / MUTIL% JSYS Argument Block / .LSMUT
; / /
; ! !
; !-------------------------------------------------------!
; ! SCS% Detected That Node Has Left the Cluster ! .LSSCS
; !-------------------------------------------------------!
; ! !
; / SCS% Interrupt Enabled Block / .LSSBK
; ! !
; !-------------------------------------------------------!
; ! !
; / /
; / SCS% Event Block / .LSSEB
; / /
; ! !
; !-------------------------------------------------------!
;Continued on the next page
;Continued from the previous page
; !-------------------------------------------------------!
; ! !
; / /
; / File Object Block / .LSFOB
; / /
; ! !
; !-------------------------------------------------------!
; ! !
; / Stopcode Processing Save Block / .LSERR
; ! !
; !=======================================================!
;LISTENER DATA BASE DEFINITIONS
PHASE 0
.LSMSG:! BLOCK 1 ;ADDRESS OF MESSAGE BUFFER
.LSNME:! BLOCK 1 ;SIXBIT REMOTE NODE NAME
.LSANN:! BLOCK 2 ;ASCIZ REMOTE NODE NAME
.LSUSR:! BLOCK ^D8 ;REMOTE SENDER NAME
.LSSNE:! BLOCK ^D8 ;EXPECTED SENDER NAME
.LSOPT:! BLOCK 4 ;DECNET SENDER OPTIONAL DATA
.LSLNK:! BLOCK 1 ;STATUS OF THE DECNET LINK
.LSPDL:! BLOCK PDSIZE ;LISTENER CONTEXT PDL.
.LSACE:! BLOCK 20 ;LISTENER AC
.LSHND:! BLOCK 1 ;LISTENER'S PROCESS HANDLE
.LSJFN:! BLOCK 1 ;DECNET LOGICAL LINK JFN
.LSSRV:! BLOCK ^D14 ;DECNET DEVICE NAME
.LSDBW:! BLOCK 8 ;[10]DEBUGGING USER NAME
.LSIBK:! BLOCK IB.SZ ;GLXLIB INITIALIZATION BLOCK
.LSPIB:! BLOCK PB.MNS ;PID INITIALIZATION BLOCK
.LSLEV:! BLOCK 3 ;INTERRUPT LEVEL TABLE
.LS1PC:! BLOCK 1 ;INTERRUPT LEVEL 1 PC SAVE BLOCK
.LS2PC:! BLOCK 1 ;INTERRUPT LEVEL 2 PC SAVE BLOCK
.LS3PC:! BLOCK 1 ;INTERRUPT LEVEL 3 PC SAVE BLOCK
.LSMUT:! BLOCK 3 ;MUTIL% ARGUMENT BLOCK
.LSSCS:! BLOCK 1 ;SCS% DETECTED NODE LEFT CLUSTER
.LSSBK:! BLOCK 2 ;SCS% INTERUPT ENABLED BLOCK
SCSLEN==1+.SQDTA+SQ%CDT ;SIZE OF SCS% EVENT BLOCK
.LSSEB:! BLOCK SCSLEN ;SCS% EVENT BLOCK
.LSFOB:! BLOCK FOB.SZ ;FILE OBJECT BLOCK
.LSERR:! BLOCK 2 ;STOPCODE PROCESSING SAVE BLOCK
DBLED:! ;END OF DEFINED LISTENER DATA BASE
DEPHASE
SUBTTL End of LPTMAC
END
;;;Local modes:
;;;Mode: MACRO
;;;Comment begin: ";[2] "
;;;Comment column: 40
;;;End: