Trailing-Edge
-
PDP-10 Archives
-
BB-JR93N-BB_1990
-
10,7/mon/dcrser.mac
There are 9 other files named dcrser.mac in the archive. Click here to see a list.
TITLE DCRSER - CARD READER SERVICE FOR MULTIPLE RSX20F CARD READERS - V023
SUBTTL S. PAAVOLA 17 APR 90
SEARCH F,S,DEVPRM,DTEPRM
$RELOC
$HIGH
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; OR COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
; 1977,1978,1979,1980,1982,1984,1986,1988,1990.
;ALL RIGHTS RESERVED.
.CPYRT<1977,1990>
XP VDCRSR,023 ;DEFINE GLOBAL VERSION NUMBER FOR LOADER MAP
PRMMIN==016 ;DTEPRM MUST BE AT LEAST THIS RECENT
IFL VDTPRM-PRMMIN,<PRINTX ?PLEASE USE LATEST VERSION OF DTEPRM
PASS2
END>
DCRSER::ENTRY DCRSER
SUBTTL SYMBOL DEFINITIONS
;COLUMN 1 SPECIAL CARD CODES
COD029==5252 ;12-0-2-4-6-8
COD026==4242 ;12-2-4-8
CODEOF==7400 ;12-11-0-1
NEWEOF==0017 ;6-7-8-9
;DEVICE DEPENDENT BITS IN LEFT HALF OF DEVIOS
CR026==400 ;SET WHEN 026 TRANSLATION TO BE MADE
CRTRBL==4000 ;TROUBLE NOTICED AT INTERRUPT LEVEL
;DEVICE DEPENDENT BITS IN RIGHT HALF OF DEVIOS
SPIMBT==1B29 ;IO STATUS BIT FOR SUPER-IMAGE MODE
;BUFFER SIZES
ASBFSZ==^D18 ;BUFFER SIZE FOR ASCII MODE
BIBFSZ==^D27 ;BUFFER SIZE FOR BINARY MODE
IMBFSZ==^D28 ;BUFFER SIZE FOR IMAGE MODE
SIBFSZ==^D41 ;BUFFER SIZE FOR SUPER-IMAGE MODE
;CDR SPECIFIC STATUS BITS FROM RSX-20F
CR.RCK==1 ;READ (PHOTO) CHECK
CR.PCK==2 ;PICK CHECK
CR.SCK==4 ;STACKER CHECK
CR.HEM==10 ;HOPPER EMPTY
CR.SFL==20 ;STACKER FULL
;STATUS BITS REQUIRING OPERATOR INTERVENTION
CR.OFL==CR.RCK!CR.PCK!CR.SCK!CR.HEM!CR.SFL
SUBTTL AUTOCONFIGURE
;DRIVER CHARARCTERISTICS
; DCR = DCRCNF
; CDR = CARD READER
; 7 = MAXIMUM DEVICES IN SYSTEM
; 0 = KONTROLLER TYPE
; 0 = MAXIMUM DRIVES PER KONTROLLER
; 0 = HIGHEST DRIVE NUMBER ON KONTROLLER
; MDSEC0 = SECTION FOR KDB/UDB
; MDSEC0 = SECTION FOR DDB
DRVCHR (DCR,CDR,7,0,0,0,MDSEC0,MDSEC0,<DR.GCC!DR.NET>)
.ORG DEVLEN
DCRDUX:! BLOCK 1 ;UNIT,,DTE
DCRCDN:! BLOCK 1 ;CPU,,DTE NUMBERS
DCRCNT:! BLOCK 1 ;CARD COUNT
DCRBUF:! BLOCK ^D40 ;BUFFER FOR READING A CARD
DCRLEN:! ;LENGTH OF DTE PRINTER DDB
.ORG
$LOW
DCRDDB: DDBBEG (DCR,DCRLEN)
SETWRD (DEVCHR,<2*HUNGST,,>) ;DEVCHR
SETWRD (DEVSER,<EXP DCRDSP>) ;DEVSER
SETWRD (DEVMOD,<DVCDR+DVIN,,14403>) ;DEVMOD
SETWRD (DEVSPL,<<.TYCDR*.TYEST>!.SPCDR,,0>) ;DEVSPL
SETWRD (DEVHCW,<INSVL.(.HCT20,HC.TYP)>) ;DEVHCW
DDBEND
$HIGH
EQUATE (LOCAL,0,<DCRCKT,DCRICD,DCRICL,DCRINT,DCRKDB,DCRKLN,DCRUDB,DCRULN>)
EQUATE (LOCAL,0,<DCRULB,DCRULP>)
DCRDSX: DRVDSP (DCR,0,DCRDDB,DCRLEN,URDDIA##)
;DEFAULT MONGEN'ED DEVICE TABLE
DEFMDT: MDKL10 (7,200,0,0,<MD.KON>) ;DEVICE CODE 200
MDKL10 (7,204,0,0,<MD.KON>) ;DEVICE CODE 204
MDKL10 (7,210,0,0,<MD.KON>) ;DEVICE CODE 210
MDKL10 (7,214,0,0,<MD.KON>) ;DEVICE CODE 214
EXP 0
DCRCFG: XMOVEI T1,DCRMDT## ;MONGEN'ED DEVICE TABLE
XMOVEI T2,DEFMDT ;DEFAULT TABLE
MOVNI T3,1 ;NO MASSBUS UNIT OR DRIVE INFORMATION
MOVEI T4,MD.KON ;MATCH ON KONTROLLER DEFINITION
PUSHJ P,AUTMDT## ;SCAN THE TABLES
JRST CPOPJ1## ;NO MATCHES
MOVE T1,.CPCPN## ;OUR CPU NUMBER
HRRZ F,DTEMAS##(T1) ;FETCH MASTER DTE
LDB T1,[POINT 7,ETDCNI(F),9] ;GET DTE NUMBER
HRRZ T2,.CPDVC## ;AND DEVICE BEING CONFIGURED
CAIE T1,(T2) ;DOING THE MASTER DTE?
JRST CPOPJ1## ;NO
MOVSI T1,(ED.PPC) ;BIT TO TEST
TDNE T1,ETDSTS(F) ;PRIMARY PROTOCOL RUNNING?
PJRST DCRRDS ;YES--CAN REQUEST DEVICE STATUS DIRECTLY
XMOVEI T1,DCRRDS ;ROUTINE TO REQUEST DEVICE STATUS
MOVEI T2,1 ;WAIT FOR PRIMARY PROTOCOL TO START
PUSHJ P,AUTCLK## ;QUEUE UP A CLOCK REQUEST
JRST CPOPJ1## ;MAYBE OTHER DTE-BASED DEVICES EXIST
;HERE WHILE PRIMARY PROTOCOL IS RUNNING TO REQUEST DEVICE STATUS
DCRRDS: PUSHJ P,SAVE4## ;SAVE SOME ACS
MOVE T1,.CPCPN## ;OUR CPU NUMBER
HRRZ F,DTEMAS##(T1) ;FETCH MASTER DTE
LOAD. P1,ED.DTN,(F) ;GET MASTER DTE NUMBER
HRL P1,.CPCPN## ;INCLUDE OUR CPU NUMBER
MOVE P2,[.EMCDR,,.EMRDS] ;FE DEVICE CODE,,FUNCTION CODE
TDZA P3,P3 ;START WITH UNIT ZERO
DCRRD1: HLLZS P3 ;JUST NEED UNIT,,0
MOVE P4,[POINT 8,P3,9] ;BYTE POINTER TO UNIT NUMBER
SETZ S, ;NO POST ADDRESS
S0PSHJ DTEQUE## ;QUEUE UP REQUEST FOR DEVICE STATUS
JFCL ;SHOULDN'T FAIL
AOBJN P3,.+1 ;ADVANCE UNIT NUMBER
TLNN P3,-1-DCRMAX##+1 ;OVERFLOW?
JRST DCRRD1 ;LOOP BACK FOR MORE
JRST CPOPJ1## ;MAYBE OTHER DTE-BASED DEVICES EXIST
;HERE WHILE PROCESSING A DEVICE STATUS MESSAGE FOR A PREVIOUSLY
;UNKNOWN DTE-BASED DEVICE TO ACTUALLY BUILD THE DTE DEVICE DATA BASE
;P1 - P4 SETUP WITH DEVICE STATUS MESSAGE POINTERS
DCRDTS: SE1ENT ;ENTER SECTION ONE
PUSHJ P,AUTLOK## ;INTERLOCK THE DATA BASE
JRST [PUSHJ P,DCRRDS ;BUSY & INTERRUPT LEVEL--TRY AGAIN LATER
JFCL ;WILL MOST LIKELY SKIP
POPJ P,] ;CALL THIS A FAILURE
PUSH P,F ;SAVE DDB ADDRESS OR ZERO
MOVE T1,.CPCPN## ;OUR CPU NUMBER
HRRZ F,DTEMAS##(T1) ;AND THE MASTER ETD FOR THIS CPU
LDB T1,[POINT 7,ETDCNI(F),9] ;DEVICE CODE
XMOVEI T2,DCRDSX ;DRIVER DISPATCH
SETZ T3, ;NO CHANNEL
PUSHJ P,AUTSET## ;SET UP AUTCON CALLS
POP P,F ;GET FLAG BACK
JUMPN F,DCRDT1 ;JUMP IF A KNOWN DEVICE
PUSHJ P,AUTADN## ;ALLOCATE A DEVICE NUMBER
HRLI T1,'CDR' ;INCLUDE GENERIC DEVICE NAME
SETZ T2, ;LOCAL DEVICE
PUSHJ P,AUTDDB## ;CREATE A DDB
JRST [PUSHJ P,AUTULK## ;NO CORE
PJRST AUTDDN##] ;DEALLOCATE DEVICE NUMBER
DCRDT1: MOVEM P1,DCRCDN(F) ;SAVE CPU,,DTE NUMBER
HLLM P3,DCRDUX(F) ;SAVE FE UNIT (LINE) NUMBER
HRRM P1,DCRDUX(F) ;SAVE DTE NUMBER (HISTORICAL)
XMOVEI T1,DCRMDT## ;POINT TO MONGEN'ED DEVICE TABLE
XMOVEI T2,DEFMDT ;GET DEVICE CODES FROM THE DEFAULT TABLE
HLLO T3,P3 ;USE FE UNIT FOR UNIT NUMBER
SETZ T4, ;IGNORE FLAGS
PUSHJ P,AUTMDT## ;SEE IF WE HAVE DATA
JRST DCRDT2 ;THERE IS NONE
;ADD FUTURE MDT VALUE TESTS HERE
DCRDT2: PUSHJ P,AUTULK## ;RELEASE INTERLOCK
JRST CPOPJ1## ;RETURN
SUBTTL DISPATCH TABLES
;DTESER DISPATCH TABLE FOR CDR
IFIW CPOPJ## ;(-1) LOST TO-10 INDIRECT MESSAGE
FCRDSP::DTEFNC ;(??) GENERATE DUMMY TABLE ENTRIES
DTEFNC (STR,F11STR) ;(03) TAKE STRING DATA
DTEFNC (HDS,F11DVS) ;(07) TAKE DEVICE STATUS
;UUOCON DISPATCH TABLE
JRST DCROFL ;OFFLINE CHECK
JRST ECOD2## ;SPECIAL ERROR STATUS
JRST DCRBSZ ;GET BUFFER SIZE
JRST DCRINI ;INITIALIZATION
JRST DCRHNG ;HUNG DEVICE
DCRDSP::JRST DCRREL ;RELEASE
JRST ILLOUT## ;OUTPUT CLOSE
JRST ILLOUT## ;OUTPUT
JRST DCRINP ;INPUT
SUBTTL INITIALIZATION AND SOME SMALL ROUTINES
;INITIALIZATION
DCRINI: MOVEI T1,DCRCNT ;OFFSET TO CARDS READ
SKIPN CDROCR## ;ALREADY SET?
MOVEM T1,CDROCR## ;SAVE FOR GETTABS
POPJ P,
;BUFFER SIZE SETUP ROUTINE - CALLED DURING INIT UUO.
DCRBSZ: MOVEI T1,ASBFSZ ;ASSUME ASCII
TRNN M,10 ;IS IT AN ASCII MODE?
JRST DCRBSR ;YES
MOVEI T1,BIBFSZ ;NO, ASSUME BINARY
TRNE M,4 ;IS IT BINARY?
JRST DCRBSR ;YES
MOVEI T1,IMBFSZ ;NO, MUST BE IMAGE MODE
TRNE M,1B29 ;SUPER IMAGE MODE?
MOVEI T1,SIBFSZ ;YES, 40 WORDS OF DATA
POPJ P, ;DONE
DCRBSR: TRZ M,1B29 ;SUPER-IMAGE MODE NOT ALLOWED
POPJ P, ;DONE
;HUNG DEVICE TIMEOUT
DCRHNG: TLO S,CRTRBL ;GOT TROUBLE
PUSHJ P,DCRREL ;DO THE RELEASE CODE
AOS (P) ;SKIP RETURN TO AVOID HUNG MESSAGE
PJRST DEVERR## ;TELL OPERATOR
;RELEASE
DCRREL: PUSHJ P,SETIOD## ;START UP THE USER
PUSHJ P,RTEVM## ;RETURN ANY EVM
JRST CLRACT## ;CLEAR IO ACTIVE AND RETURN
;OFF-LINE CHECK
DCROFL: MOVEI T1,EM.OFL!EM.NXD ;OFF LINE BITS
TDNN T1,DEVSTS(F) ;STILL THERE
AOS (P) ;NO, GOOD RETURN
POPJ P, ;RETURN
SUBTTL INPUT UUO
;HERE ON AN INPUT UUO
DCRINP: PUSHJ P,SAVE4## ;SAVE P1-P4
DCRGO: MOVEI T1,EM.OFL!EM.NXD ;GET OFF-LINE BIT
TLZN S,CRTRBL ;TROUBLE FROM INTERRUPT LEVEL?
TDNE T1,DEVSTS(F) ; OR DEVICE OFF-LINE?
JRST TKUSER ;YES, TELL USER
TLZN S,IOBEG ;FIRST TIME HERE?
JRST DCRIN1 ;NO, SKIP FIRST TIME STUFF
TLZ S,CR026 ;YES, TURN OFF 026 MODE
MOVSI T2,PCDRAS## ;ASCII BYTE POINTER
TRNE S,10 ;IN ASCII MODE?
MOVSI T2,PCDRBI## ;NO, BYTE POINTER FOR BINARY OR IMAGE
MOVEM T2,DEVPTR(F) ;SET BYTE POINTER INTO DDB
DCRIN1: PUSHJ P,NEWBUF## ;INITIALIZE NEW BUFFER
JRST ADRERR## ;ADDRESS ERROR
MOVE P1,DCRCDN(F) ;PICK UP CPU#,,DTE#
MOVE P2,[.EMCDR,,.EMACK] ;START A CARD FEEDING
HRRI P3,2 ;ONLY THE LINE NUMBER AS DATA
MOVE P4,[POINT 8,P3,9] ;LINE NUMBER IS IN P3
MOVEM S,DEVIOS(F) ;SAVE S
SETZM S ;NO POST PROCESSING FOR THIS MESSAGE
PUSHJ P,DTEQUE## ;QUEUE THE REQUEST
JRST TKUSER ;ERROR, GO TELL USER
MOVE S,DEVIOS(F) ;GET BACK S
TRO S,IOACT ;SET IO ACTIVE
SETZM P3 ;ZERO THE BYTE COUNT IF AT INTERRUPT LEVEL
PJRST STOIOS## ;SAVE S AND RETURN
;HERE ON OFF-LINE CARD READER
TKUSER: MOVEM S,DEVIOS(F) ;SAVE DEVIOS FOR USER
HRRZ T2,DEVBUF(F) ;ADR OF BUFFER HEADER
EXCTUX <HRRZ T1,@T2> ;CURRENT USER BUFFER
PUSHJ P,UADRCK## ;ADDRESS CHECK IT
EXCTUX <SKIPGE @T1> ;ANY DATA THERE?
PJRST RTEVM## ;YES, RETURN IT TO USER
PUSHJ P,HNGSTP## ;NOTIFY OPERATOR
JRST DCRGO ;TRY AGAIN
SUBTTL STRING INPUT
;HERE FROM DTESER ON STRING INPUT FROM THE 11
F11STR: PUSHJ P,SETRGS ;SET UP INTERRUPT REGS
JRST EATMSG## ;NO DDB
MOVSI S,CRSTR1 ;PROCESSING ROUTINE WHEN DATA IS IN
HRRI P3,^D160 ;160 8 BIT BYTES
MOVEI P4,DCRBUF(F) ;GOES INTO DDB BUFFER
HRLI P4,(POINT 16,) ;16 BIT BYTES
MOVEI T1,SPIMBT ;THE SUPER IMAGE MODE BIT
TDNN T1,DEVIOS(F) ;SUPER IMAGE MODE?
POPJ P, ;NO, BACK TO DTESER FOR THE DATA
MOVSI S,CRSPIM ;YES, USE THIS ROUTINE INSTEAD
HRR P4,DEVPTR(F) ;DATA STRAIGHT TO USER
ADDI P4,1
POPJ P, ;BACK TO DTESER
;HERE FROM DTESER WHEN SUPER IMAGE MODE DATA HAS ARRIVED
CRSPIM: PUSHJ P,SETRGS ;SET UP INTERRUPT REGS
JRST EATMSG## ;NO DDB
MOVEI T1,^D40 ;JUST READ 40 WORDS
ADDM T1,DEVPTR(F) ;ADJUST POINTER APPROPRIATELY
JRST CRDON ;FINISH OFF
;HERE FROM DTESER WHEN THE DATA HAS ARRIVED FOR OTHER THAN SUPER IMAGE MODE
CRSTR1: PUSHJ P,SETRGS ;SET UP INTERRUPT REGS
JRST EATMSG## ;NO DDB
MOVE T4,P4 ;GET POINTER TO DATA
MOVEI T3,^D80 ;80 COLUMNS
CAMLE T3,DEVCTR(F) ;BUFFER SMALLER THAN A CARD?
MOVE T3,DEVCTR(F) ;YES, USE THE SMALLER NUMBER
TRNN S,7 ;ASCII OR BINARY?
TRNN S,10 ;OR NOT IMAGE?
JRST NORMOD ;YES, GO LOOK FOR EOF
;IMAGE MODE
CRIMG: ILDB T1,T4 ;GET A BYTE
IDPB T1,DEVPTR(F) ;GIVE IT TO USER
SOJG T3,CRIMG ;LOOP THROUGH CARD
JRST CRDON ;NO, FINISH OFF
;EOF CHECKS
NORMOD: ILDB T2,P4 ;PICK UP COLUMN ONE
TRZ T2,-10000 ;ONLY THE RAW DATA
CAIE T2,CODEOF+NEWEOF;EOF?
CAIN T2,CODEOF ;THIS TYPE?
JRST EOFCRD ;YES
CAIN T2,NEWEOF ;NEW TYPE EOF?
JRST EOFCRD ;YES
TRNE S,14 ;BINARY MODE?
JRST CRBIN ;YES, GO PROCESS CARD
;HERE FOR ASCII MODE TO READ EACH BYTE FROM THE CARD READER AND
; STORE THE CONVERTED CHARACTER IN THE USERS BUFFER. NOTE THAT
; OF THE 16 BITS WE GET FROM -20F, BIT 0 = INVALID MULIT-PUNCH,
; BITS 1-3 = ENCODED ROW PUNCHES 1-7, AND BITS 4-15 = 12 HOLES.
CAIN T2,COD026 ;026 CARD DEFINITION?
JRST SET026 ;YES, GO SET IT UP
CAIN T2,COD029 ;029 CARD DEFINITION?
JRST SET029 ;YES, SET THAT MODE
CRASC: ILDB T1,T4 ;PICK UP A BYTE
TRNE T1,100000 ;MULTIPUNCH COLUMN
JRST [MOVEI T1,"\" ;YES, GET "INVALID" CHARACTER
JRST CRASC1] ;AND STORE THAT
CAIN T1,5000 ;CONVERT [
MOVEI T1,24202 ; TO INTERNAL FORM
CAIN T1,3000 ;ALSO, CONVERT ]
MOVEI T1,22202 ; TO INTERNAL FORM
LDB T2,[POINT 3,T1,26] ;PICK UP ZONES PLUS LOW ENCODED BIT
TRNE T1,3 ;AN 8 OR 9 PUNCH?
TRC T2,7 ;YES, ENCODE THAT
TRZE T1,40000 ;COPY THIS BIT
TRO T2,10 ;TO HERE
TRNE T1,1 ;AND THIS BIT ON
TRO T1,10000 ;MEANS THIS BIT SHOULD BE ON
LSH T1,-^D12 ;POSITION THE REMAINING CODE BITS
TLNE S,CR026 ;026 MODE?
TRO T2,20 ;YES, ENCODE THAT
LDB T1,CRCVPT##(T1) ;PICK UP ASCII CHARACTER
CRASC1: IDPB T1,DEVPTR(F) ;PUT IT INTO USER'S BUFFER
SOJG T3,CRASC ;LOOP THROUGH CARD
MOVEI T1,15 ;TACK ON A CR
IDPB T1,DEVPTR(F) ;
MOVEI T1,12 ; AND A LF
IDPB T1,DEVPTR(F) ;
JRST CRDON ;FINISH OFF CARD
;BINARY CARD PROCESSING
CRBIN: MOVEI T1,-5(T2) ;CHECK FOR 7-9 PUNCH IN COLUMN 1
TRNE T1,17 ;THERE?
TRO S,IOIMPM ;NO, SET IMPROPER MODE BIT
LSH T2,-6 ;POSITION THE WORD COUNT
JUMPE T2,DCRGO ;IGNORE CARD IF COUNT=0
HRRM T2,@DEVPTR(F) ;STORE COUNT IN BUFFER
IMULI T2,3 ;CONVERT TO BYTE COUNT
CAMGE T2,T3 ;SMALL ENOUGH FOR BUFFER?
MOVEM T2,T3 ;YES, USE THIS COUNT
IBP T4 ;SKIP COLUMN ONE
ILDB P4,T4 ;GET COLUMN 2
TRZ P4,-10000 ;ONLY COLUMN PUNCHES
HRLM P4,@DEVPTR(F) ;STORE IN L.H. OF 1ST DATA WORD
HRLZ P4,P4 ;POSITION CHECK SUM
CRBIN1: ILDB T1,T4 ;PICK UP A COLUMN
IDPB T1,DEVPTR(F) ;PUT IT INTO USER'S BUFFER
SOJG T3,CRBIN1 ;LOOP THROUGH CARD
MOVEI T2,@DEVIAD(F) ;GET ADDRESS OF BUFFER AGAIN
PUSHJ P,CKS12## ;CALCULATE THE CHECKSUM
CAME T1,P4 ;GOOD CHECKSUM?
TRO S,IODTER ;NO, SET THE BIT
;END OF CARD PROCESSING
CRDON: MOVEI T1,@DEVPTR(F) ;PICK UP STOPPING PLACE
MOVEI T2,@DEVIAD(F) ;PICK UP STARTING PLACE
SUBI T1,1(T2) ;COMPUTE NUMBER OF WORDS STORED
HRRM T1,1(T2) ;STORE IN 1ST WORD OF BUFFER
AOS DCRCNT(F) ;INCREMENT THE CARD COUNTER
PUSHJ P,SETIOD## ;LET USER CONTINUE
PUSHJ P,ADVBFF## ;ON TO NEXT BUFFER
SKIPA
JRST DCRGO ;THERE IS ONE, START IT
PUSHJ P,RTEVM## ;NO BUFFER AVAILABLE, RETURN ANY EVM
PJRST CLRACT## ;CLEAR I/O ACTIVE AND RETURN
;MODE SETTING
SET026: TLOA S,CR026 ;PUT INTO 026 MODE
SET029: TLZ S,CR026 ;PUT INTO 029 MODE
JRST DCRGO ;START A NEW CARD
;EOF CARD PROCESSING
EOFCRD: TLO S,IOEND ;SET THE MAGIC BIT FOR UUOCON
JRST CRDON ;THAT'S ALL WITH THIS CARD
SUBTTL ACCEPT DEVICE STATUS FROM 11
;HERE FROM DTESER TO ACCEPT DEVICE STATUS FROM 11 (DTESER ALREADY RECEIVED IT)
F11DVS: PUSHJ P,SETRGX ;SET UP INTERRUPT REGS (CHECK EM.NXD ALSO)
JRST EATMSG## ;NO DDB
ILDB T2,P4 ;GET FIRST (GENERAL) STATUS BYTE
ILDB T1,P4 ;GET SECOND (CDR) STATUS BYTE
HRL T2,T1 ;REPACK THE DATA
MOVE T3,DEVSTS(F) ;PICK UP OLD STATUS
MOVEM T2,DEVSTS(F) ;PUT THE DEVICE STATUS INTO THE DDB
MOVSI T1,DVOFLN ;ASSUME DEVICE ON-LINE
TDNE T2,[CR.RCK+CR.PCK+CR.SCK,,EM.FER] ;ANY BAD ERRORS?
JRST CRDVS2 ;YES
TRNE T2,EM.OFL!EM.NXD ;OFF-LINE?
JRST CRDVS3 ;YES
ANDCAM T1,DEVCHR(F) ;
MOVSI T1,CRTRBL ;GET TROUBLE BIT
ANDCAM T1,DEVIOS(F) ;MAKE SURE IT'S CLEAR
TRNE T3,EM.OFL!EM.NXD
PUSHJ P,PSIONL## ;YES, TELL USER IT IS BACK AGAIN
PJRST EATMSG## ;EAT THE REST OF THE INDIRECT DATA
CRDVS2: TRO S,IODERR ;NOTE DEVICE ERROR
TLO S,CRTRBL ;YES, NOTE TROUBLE AT INTERRUPT LEVEL
CRDVS3: TRNN S,IOACT ;ANY I/O ACTIVE?
PJRST EATMSG## ;NO, JUST EAT THE REST OF THE MESSAGE
IORM T1,DEVCHR(F) ;NOTE DEVICE OFF-LINE
MOVEM S,DEVIOS(F) ;SAVE NEW STATUS
PUSHJ P,DEVERR## ;NOTIFY THE USER
PJRST EATMSG## ;AND EAT THE REST OF THE MESSAGE
SUBTTL SUPPORT SUBROUTINES
;INTERRUPT REGISTER SETUP
;CALL WITH:
; P1=CPU #,,DTE #
; P3=LINE,,DATA COUNT
; P4=BYTE POINTER TO MESSAGE
SETRGX: MOVE T1,P4 ;COPY BYTE POINTER
ILDB T1,T1 ;GET GENERAL STATUS BYTE
TRNE T1,EM.NXD ;NON-EXISTANT DEVICE?
POPJ P, ;THEN WE CERTAINLY DON'T KNOW ABOUT IT
SETRGS: MOVE F,DDBTAB##+.TYCDR ;POINT TO PROTOTYPE DDB
SETRG1: HLRZ F,DEVSER(F) ;LINK TO NEXT
JUMPE F,SETRG2 ;GO CONFIGURE IF END OF CHAIN
LDB T1,PDVTYP## ;GET DEVICE TYPE
CAIE T1,.TYCDR ;STILL LOOKING AT RIGHT TYPE?
JRST SETRG2 ;NO--MUST CONFIGURE
HRRZ T1,DEVSER(F) ;GET DISPATCH
CAIN T1,DCRDSP ;OWNED BY US?
CAME P1,DCRCDN(F) ;AND CPU,,DTE NUMBERS MATCH?
JRST SETRG1 ;TRY NEXT DDB
HLRZ T1,DCRDUX(F) ;GET FE UNIT (LINE) NUMBER
HLRZ T2,P3 ;AND THE ONE FROM THE MESSAGE
CAIE T1,(T2) ;MATCH?
JRST SETRG1 ;TRY ANOTHER
AOS (P) ;GIVE SKIP RETURN
PJRST IOSET## ;GET THE REST OF THE AC'S
SETRG2: SETZ F, ;UNKNOWN DEVICE
PUSHJ P,DCRDTS ;AUTOCONFIGURE A CARD READER
POPJ P, ;FAILED
AOS (P) ;GIVE SKIP RETURN
PJRST IOSET## ;GET THE REST OF THE AC'S
END