Trailing-Edge
-
PDP-10 Archives
-
BB-H580E-SB_1985
-
keyrms.cbl
There are 4 other files named keyrms.cbl in the archive. Click here to see a list.
ID DIVISION.
PROGRAM-ID. KEYRMS - RMS/COBOL-74 PROGRAM.
**************************************************************
* *
* This program demonstrates the following: *
* *
* 1. The use of RMS with COBOL in order to use RMS *
* indexed files. *
* *
* 2. The use of a DECLARATIVES procedure to trap *
* an error (such as error number 508 for File *
* not found). *
* *
* This program can be keyed in and run to allow you to *
* become familiar with using files with more than one key. *
* *
**************************************************************
ENVIRONMENT DIVISION.
I-O SECTION.
FILE-CONTROL.
**************************************************************
* *
* To specify that the file is an RMS indexed file, you *
* can either specify "ORGANIZATION IS RMS INDEXED" or *
* "ALTERNATE RECORD KEY IS" or both. *
* *
* This example indicates to the compiler that you want *
* an RMS indexed file. *
* *
**************************************************************
SELECT RMS-INDEX-FILE ASSIGN TO DSK
ORGANIZATION IS RMS INDEXED
ACCESS IS DYNAMIC
RECORDING MODE IS SIXBIT
FILE STATUS IS FILE-STATUS-1, FILE-STATUS-2,
IGNORE-FLAG
RECORD KEY IS EMPLOYEE-NAME
ALTERNATE RECORD KEY IS EMPLOYEE-NUMBER
WITH DUPLICATES.
DATA DIVISION.
FILE SECTION.
FD RMS-INDEX-FILE VALUE OF ID IS "RMSKY RMS".
01 RMS-INDEX-RECORD.
02 EMPLOYEE-NAME PIC X(10).
02 FILLER PIC X.
02 EMPLOYEE-NUMBER PIC 9(6).
WORKING-STORAGE SECTION.
**************************************************************
* *
* Establish the File Status errors you want to trap. RMS *
* File Status errors numbers are in the range from 500 *
* to 550. *
* *
* Refer to Chapter 3 for a complete description of RMS *
* File Status errors that can be trapped with the USE *
* statement. *
* *
**************************************************************
01 ERR-FILE-NOT-FOUND INDEX VALUE 508.
01 FILE-STATUS-1 PIC 9(2).
01 FILE-STATUS-2 PIC 9(10).
01 FILE-STATUS-2-R REDEFINES FILE-STATUS-2.
02 FILLER PIC X(7).
02 FILE-STATUS-2-NUM PIC 9(3).
01 IGNORE-FLAG USAGE INDEX.
**************************************************************
* *
* Define the commands that are used in this program to *
* work with RMS indexed files. *
* *
**************************************************************
01 COMMAND-WORD.
02 COMMAND-LETTER PIC X.
88 COMMAND-A VALUE "A".
88 COMMAND-C VALUE "C".
88 COMMAND-D VALUE "D".
88 COMMAND-H VALUE "H".
88 COMMAND-P VALUE "P".
88 COMMAND-R VALUE "R".
88 COMMAND-T VALUE "T".
88 COMMAND-U VALUE "U".
88 COMMAND-W VALUE "W".
02 COMMAND-LET-2 PIC X.
88 COMMAND-L2-R VALUE "R".
88 COMMAND-L2-S VALUE "S".
PROCEDURE DIVISION.
DECLARATIVES.
DECLARE-ERROR SECTION.
USE AFTER STANDARD ERROR PROCEDURE ON RMS-INDEX-FILE.
**************************************************************
* *
* If the program gets an I/O error for RMS-INDEX-FILE, *
* this section will be executed. The file status items *
* will have been set by LIBOL. *
* *
* If the error code from LIBOL is "File not found", a *
* flag is set. If the error code is not "File not found", *
* this procedure does not set the "IGNORE" flag and LIBOL *
* aborts this program (as if there were no USE procedure *
* at all). *
* *
**************************************************************
DECLARE1-1.
IF FILE-STATUS-2-NUM NOT = ERR-FILE-NOT-FOUND
GO TO DECLARE1-EXIT.
**************************************************************
* *
* The "File not found" error has occurred. Set the file *
* status item "IGNORE-FLAG" to ignore the error, and to *
* return to the program. *
* *
**************************************************************
SET IGNORE-FLAG TO 1.
DECLARE1-EXIT.
EXIT.
END DECLARATIVES.
BEGIN-RMS-PROGRAM.
DISPLAY "[COBOL-RMS demonstration program]".
OPEN-RMS-FILE.
**************************************************************
* *
* Attempt to open the file for I/O. If the file does not *
* exist, the error procedure traps the open error and *
* sets the file status item "IGNORE-FLAG" to 1. *
* *
**************************************************************
OPEN I-O RMS-INDEX-FILE.
IF IGNORE-FLAG NOT = 0
DISPLAY "[File not found-- creating empty file]"
OPEN OUTPUT RMS-INDEX-FILE
CLOSE RMS-INDEX-FILE
OPEN I-O RMS-INDEX-FILE.
DISPLAY-OPEN-FOR-IO.
DISPLAY "[File RMSKY.RMS open for I/O]".
**************************************************************
* *
* This procedure displays the commands that can be used. *
* *
**************************************************************
GET-HELP.
DISPLAY SPACE.
DISPLAY "Type command, one of the following:".
DISPLAY "C = Close file and exit".
DISPLAY "D = Delete a record".
DISPLAY "RR = Do a read with random access".
DISPLAY "RS = Do a read with sequential access".
DISPLAY "W = Write a new record".
DISPLAY "U = Update a record (will do a rewrite)".
DISPLAY "T = Type all records in the file".
DISPLAY "H = Type this list of commands".
**************************************************************
* *
* Enter a command to close, delete, read, write, update, *
* or type an RMS record. Enter "H" to get help. *
* *
**************************************************************
GET-COMMAND.
DISPLAY SPACE.
DISPLAY "COMMAND> " WITH NO ADVANCING.
ACCEPT COMMAND-WORD.
IF COMMAND-LETTER = SPACE GO TO GET-COMMAND.
IF COMMAND-C GO TO CLOSE-RMS-FILE.
IF COMMAND-D GO TO DELETE-RMS-RECORD.
IF COMMAND-R GO TO READ-RMS-RECORD.
IF COMMAND-W GO TO WRITE-RMS-RECORD.
IF COMMAND-U GO TO UPDATE-RMS-RECORD.
IF COMMAND-T GO TO TYPE-RMS-RECORD.
IF COMMAND-H GO TO GET-HELP.
INVALID-COMMAND.
DISPLAY "?Invalid command, type 'H' for help"
GO TO GET-COMMAND.
**************************************************************
* *
* The C command closes the RMS file and exits from the *
* program. *
* *
**************************************************************
CLOSE-RMS-FILE.
CLOSE RMS-INDEX-FILE.
STOP RUN.
**************************************************************
* *
* The D command deletes an RMS record from the file. *
* *
**************************************************************
DELETE-RMS-RECORD.
PERFORM ACCEPT-RECORD-KEY.
DELETE RMS-INDEX-FILE INVALID KEY
DISPLAY "?Can't delete record: "
WITH NO ADVANCING
PERFORM TYPE-FILE-STATUS
GO TO GET-COMMAND.
DISPLAY "[Record deleted]".
GO TO GET-COMMAND.
**************************************************************
* *
* The U command updates an RMS record in the file. *
* *
**************************************************************
UPDATE-RMS-RECORD.
PERFORM ACCEPT-RECORD-KEY.
READ RMS-INDEX-FILE INVALID KEY
DISPLAY "?Can't read record: "
WITH NO ADVANCING
PERFORM TYPE-FILE-STATUS
GO TO GET-COMMAND.
DISPLAY "[Employee number is ",EMPLOYEE-NUMBER,"]".
PERFORM ACCEPT-ALTERNATE-KEY.
REWRITE RMS-INDEX-RECORD INVALID KEY
DISPLAY "?Can't rewrite record: "
WITH NO ADVANCING
PERFORM TYPE-FILE-STATUS
GO TO GET-COMMAND.
DISPLAY "[Record rewritten]".
GO TO GET-COMMAND.
**************************************************************
* *
* The W command writes a new RMS record in the file. *
* *
**************************************************************
WRITE-RMS-RECORD.
PERFORM ACCEPT-RECORD-KEY.
PERFORM ACCEPT-ALTERNATE-KEY.
WRITE RMS-INDEX-RECORD INVALID KEY
DISPLAY "?Can't write record: "
WITH NO ADVANCING
PERFORM TYPE-FILE-STATUS
GO TO GET-COMMAND.
DISPLAY "[Record written]".
GO TO GET-COMMAND.
**************************************************************
* *
* The following procedures allow you to either read RMS *
* records randomly with the "RR" command or read RMS *
* records sequentially with the "RS" command. *
* *
**************************************************************
READ-RMS-RECORD.
IF COMMAND-L2-R GO TO READ-RANDOM-RECORD.
IF COMMAND-L2-S GO TO READ-SEQUENTIAL.
GO TO INVALID-COMMAND.
READ-RANDOM-RECORD.
DISPLAY "Which key? (P = primary, A = alternate): "
WITH NO ADVANCING.
ACCEPT COMMAND-LETTER.
IF COMMAND-P GO TO ACCEPT-PRIMARY-KEY.
IF COMMAND-A GO TO ACCEPT-SECONDARY-KEY.
GO TO READ-RANDOM-RECORD.
ACCEPT-PRIMARY-KEY.
PERFORM ACCEPT-RECORD-KEY.
READ RMS-INDEX-FILE KEY IS EMPLOYEE-NAME INVALID KEY
DISPLAY "?Can't read record: "
PERFORM TYPE-FILE-STATUS
GO TO GET-COMMAND.
GO TO DISPLAY-RMS-RECORD.
ACCEPT-SECONDARY-KEY.
PERFORM ACCEPT-ALTERNATE-KEY.
READ RMS-INDEX-FILE KEY IS EMPLOYEE-NUMBER
INVALID KEY
DISPLAY "?Can't read record: "
PERFORM TYPE-FILE-STATUS
GO TO GET-COMMAND.
GO TO DISPLAY-RMS-RECORD.
READ-SEQUENTIAL.
READ RMS-INDEX-FILE NEXT RECORD AT END
DISPLAY "?Can't read next record: "
PERFORM TYPE-FILE-STATUS
GO TO GET-COMMAND.
DISPLAY-RMS-RECORD.
DISPLAY "[Record is: !" WITH NO ADVANCING.
DISPLAY RMS-INDEX-RECORD, "!]".
GO TO GET-COMMAND.
**************************************************************
* *
* The T command types all the records in the RMS file. *
* This command allows you the option to type the RMS file *
* in the order of the primary key or in the order of the *
* alternate key. *
* *
* The START statement is used here because of the current *
* positioning in the file. The current position may or *
* may not be the first record in the file. *
* *
**************************************************************
TYPE-RMS-RECORD.
DISPLAY "In order of which key? " WITH NO ADVANCING.
DISPLAY "(P = primary, A = alternate): "
WITH NO ADVANCING.
ACCEPT COMMAND-LETTER.
IF COMMAND-P GO TO TYPE-START-PRIMARY.
IF COMMAND-A GO TO TYPE-START-ALTERNATE.
GO TO TYPE-RMS-RECORD.
TYPE-START-PRIMARY.
MOVE LOW-VALUES TO EMPLOYEE-NAME.
START RMS-INDEX-FILE KEY NOT LESS THAN EMPLOYEE-NAME
INVALID KEY GO TO TYPE-RMS-RECORD-IK.
GO TO TYPE-RMS-RECORD-R.
TYPE-START-ALTERNATE.
MOVE LOW-VALUES TO EMPLOYEE-NUMBER
START RMS-INDEX-FILE KEY NOT LESS THAN EMPLOYEE-NUMBER
INVALID KEY GO TO TYPE-RMS-RECORD-IK.
GO TO TYPE-RMS-RECORD-R.
TYPE-RMS-RECORD-R.
READ RMS-INDEX-FILE NEXT RECORD AT END GO TO GET-COMMAND.
DISPLAY RMS-INDEX-RECORD.
GO TO TYPE-RMS-RECORD-R.
TYPE-RMS-RECORD-IK.
DISPLAY "% Can't start reading file: " WITH NO ADVANCING.
PERFORM TYPE-FILE-STATUS.
GO TO GET-COMMAND.
**************************************************************
* *
* This subroutine accepts the primary record key for *
* a random read. *
* *
**************************************************************
ACCEPT-RECORD-KEY SECTION.
ACC-REC-KEY.
DISPLAY "Type employee name X(10): "
WITH NO ADVANCING.
ACCEPT EMPLOYEE-NAME.
ACC-REC-KEY-EXIT.
EXIT.
**************************************************************
* *
* This subroutine accepts the alternate record key for a *
* random read. *
* *
* RMS allows up to 255 alternate record keys. Each key *
* can have up to 255 characters. *
* *
**************************************************************
ACCEPT-ALTERNATE-KEY SECTION.
ACC-ALT-KEY.
DISPLAY "Type employee number 9(6): "
WITH NO ADVANCING.
ACCEPT EMPLOYEE-NUMBER.
ACC-ALT-KEY-EXIT.
EXIT.
**************************************************************
* *
* This subroutine types the file status. The file status *
* is contained in "FILE-STATUS-1". *
* *
**************************************************************
TYPE-FILE-STATUS SECTION.
TYPE-FILE-STATUS-1.
DISPLAY "File status = ",FILE-STATUS-1,": "
WITH NO ADVANCING.
IF FILE-STATUS-1 = 0
DISPLAY "Sucessful completion"
GO TO TYPE-FILE-STATUS-EXIT.
IF FILE-STATUS-1 = 23
DISPLAY "Invalid key, record not found"
GO TO TYPE-FILE-STATUS-EXIT.
IF FILE-STATUS-1 = 30
DISPLAY "Permanent error"
GO TO TYPE-FILE-STATUS-EXIT.
IF FILE-STATUS-1 = 22
DISPLAY "Duplicate key"
GO TO TYPE-FILE-STATUS-EXIT.
IF FILE-STATUS-1 = 10
DISPLAY "AT END, no next logical record"
GO TO TYPE-FILE-STATUS-EXIT.
DISPLAY "%% Unexpected error %%".
TYPE-FILE-STATUS-EXIT.
EXIT.