Trailing-Edge
-
PDP-10 Archives
-
BB-H311D-RM
-
monitor-sources/mexec.mac
There are 53 other files named mexec.mac in the archive. Click here to see a list.
; UPD ID= 5075, SNARK:<6.MONITOR>MEXEC.MAC.259, 9-Nov-84 13:24:20 by GRANT
;TCO 6.2278 - fix BUGxxx output
; UPD ID= 5050, SNARK:<6.MONITOR>MEXEC.MAC.258, 31-Oct-84 18:08:38 by MOSER
;TCO 6.2256 - FIX CRJOB IF CJ%WTA SPECIFIED
; UPD ID= 5038, SNARK:<6.MONITOR>MEXEC.MAC.257, 30-Oct-84 13:55:40 by MCLEAN
;FIX LOGOUT
; UPD ID= 5037, SNARK:<6.MONITOR>MEXEC.MAC.256, 30-Oct-84 09:59:56 by PAETZOLD
;TCO 6.2267 - Save CX in JOBCOF.
; UPD ID= 5003, SNARK:<6.MONITOR>MEXEC.MAC.255, 24-Oct-84 20:15:31 by GLINDELL
;Put in a call to DCNJB0 in CHKR
; UPD ID= 4974, SNARK:<6.MONITOR>MEXEC.MAC.254, 22-Oct-84 16:31:20 by GRANT
;Remove references to FTCI
; UPD ID= 4965, SNARK:<6.MONITOR>MEXEC.MAC.253, 19-Oct-84 14:46:22 by GLINDELL
;More TCO 6.1.1021 - clear T3 before SOUT in LOGBUG
; UPD ID= 4964, SNARK:<6.MONITOR>MEXEC.MAC.252, 19-Oct-84 13:42:26 by GLINDELL
;More TCO 6.1.1021 - get only section-relative address of BUG. for compare
; UPD ID= 4948, SNARK:<6.MONITOR>MEXEC.MAC.251, 17-Oct-84 15:17:44 by HAUDEL
;TCO 6.2250 - Add an ERJMP after an ODTIM% in LOGJ2 code.
; UPD ID= 4947, SNARK:<6.MONITOR>MEXEC.MAC.250, 17-Oct-84 13:58:59 by HAUDEL
;TCO 6.2249 - Add some ERJMPs after a few JSYSes.
; UPD ID= 4945, SNARK:<6.MONITOR>MEXEC.MAC.249, 17-Oct-84 11:57:16 by TGRADY
; TCO 6.2247 (QAR 706189) Print proper job number in ATTACH JSYS.
; TCO 6.2214 (QAR 706279) Fix up STCRJB and ELOGO to understand that JOBONT
; contains GLOBAL job numbers, not local. Oversight in edit 4785.
; UPD ID= 4944, SNARK:<6.MONITOR>MEXEC.MAC.248, 17-Oct-84 10:55:47 by HAUDEL
;TCO 6.2246 - Add ERJMP .+1 after BOUTs in LOGTIM: code.
; UPD ID= 4935, SNARK:<6.MONITOR>MEXEC.MAC.247, 15-Oct-84 13:06:30 by GRANT
;The assembly switch CFSCOD has been eliminated
; UPD ID= 4915, SNARK:<6.MONITOR>MEXEC.MAC.246, 10-Oct-84 17:13:06 by GLINDELL
;TCO 6.1.1021 - 6.1 address space
; BGPTR entries are now two words long (full 30-bit addresses)
; UPD ID= 4884, SNARK:<6.MONITOR>MEXEC.MAC.245, 26-Sep-84 16:40:18 by GRANT
;In CHKR, CALL KLPRCT
; UPD ID= 4882, SNARK:<6.MONITOR>MEXEC.MAC.244, 26-Sep-84 15:59:55 by GRANT
;TCO 6.2225 - Add "save a tree" option to LOGBUG
; UPD ID= 4863, SNARK:<6.MONITOR>MEXEC.MAC.243, 23-Sep-84 15:24:41 by TBOYLE
;Clear output buffer during LOGOUT after STPAR in LOG1
; UPD ID= 4813, SNARK:<6.MONITOR>MEXEC.MAC.242, 17-Sep-84 10:13:22 by PURRETTA
;Update copyright notice
; UPD ID= 4785, SNARK:<6.MONITOR>MEXEC.MAC.241, 31-Aug-84 14:29:47 by TGRADY
;TCO 6.2214 (QAR 706071) Fix up use of CRJONJ and JOBONT for CRJOB'ed jobs.
; UPD ID= 4777, SNARK:<6.MONITOR>MEXEC.MAC.240, 30-Aug-84 10:48:24 by PAETZOLD
;TCO 6.2211 - Carrier off needs to preserve KIMUFL and KIMUPC.
; UPD ID= 4771, SNARK:<6.MONITOR>MEXEC.MAC.239, 29-Aug-84 13:57:18 by TGRADY
;TCO 6.2201 (QAR 706198) - Remove edit 4444 (TCO 6.2121) and fix the
;general problem of needing a local job index in the USAGE record.
; UPD ID= 4743, SNARK:<6.MONITOR>MEXEC.MAC.238, 24-Aug-84 09:43:58 by PAETZOLD
;TCO 6.2191 - Change unsafe SETJSB calls to MAPJSB.
; UPD ID= 4702, SNARK:<6.MONITOR>MEXEC.MAC.237, 16-Aug-84 13:28:15 by GROSSMAN
;More TCO 6.2176 - Reverse order of IPALOD and KNIJB0.
; UPD ID= 4698, SNARK:<6.MONITOR>MEXEC.MAC.236, 15-Aug-84 18:51:40 by GROSSMAN
;TCO 6.2176 - Add call to KNIJB0 in CHKR.
; UPD ID= 4677, SNARK:<6.MONITOR>MEXEC.MAC.235, 13-Aug-84 10:26:47 by GLINDELL
;Type out the full 30-bit address on entry to the MX
; UPD ID= 4676, SNARK:<6.MONITOR>MEXEC.MAC.234, 11-Aug-84 00:54:45 by TBOYLE
;TCO 6.2171 Save all registers at JOBCOF.
; UPD ID= 4620, SNARK:<6.MONITOR>MEXEC.MAC.233, 28-Jul-84 15:58:40 by MOSER
;TCO 6.2083 - ENHANCE MONBK - ADD MONBKX
; UPD ID= 4610, SNARK:<6.MONITOR>MEXEC.MAC.232, 27-Jul-84 14:51:19 by TBOYLE
;New SYSERR - At LOGBF6-1 use XMOVEI.
; UPD ID= 4507, SNARK:<6.MONITOR>MEXEC.MAC.231, 12-Jul-84 21:55:51 by TGRADY
;TCO 6.2126 Use Global job number as argument to GTOKM .GOATJ function
; UPD ID= 4455, SNARK:<6.MONITOR>MEXEC.MAC.230, 12-Jul-84 10:43:05 by CDUNN
;More TCO 6.1127 Add call to SCSLGO at FLOGO to delete SCS% data on top
;fork kill
; UPD ID= 4444, SNARK:<6.MONITOR>MEXEC.MAC.229, 6-Jul-84 16:54:45 by TBOYLE
;TCO 6.2121 - Make UCKSET convert jobno to local before mapping checkpoint pg.
; UPD ID= 4418, SNARK:<6.MONITOR>MEXEC.MAC.228, 2-Jul-84 13:46:13 by TGRADY
;TCO 6.2114 - Fix typo in TTY2GL to return waiting fork number...
; UPD ID= 4364, SNARK:<6.MONITOR>MEXEC.MAC.227, 20-Jun-84 15:59:58 by TBOYLE
;TCO 6.2104 - Fix session start and end times at USGSEN.
; UPD ID= 4363, SNARK:<6.MONITOR>MEXEC.MAC.226, 20-Jun-84 15:10:36 by TGRADY
;TCO 6.2103 (QAR 706052) - Fix ATACH% to prevent 'Wheel or Opr required' error
; UPD ID= 4358, SNARK:<6.MONITOR>MEXEC.MAC.225, 18-Jun-84 15:48:47 by TGRADY
;TCO 6.2077 (QAR 706022) Make GETAB% return a -1 for non-existant jobs.
; UPD ID= 4356, SNARK:<6.MONITOR>MEXEC.MAC.224, 18-Jun-84 14:13:38 by GRANT
;TCO 6.2102 (QAR 706050) - During system shutdown disallow incoming nvt
;(ARPANET and DECnet) logins.
; UPD ID= 4300, SNARK:<6.MONITOR>MEXEC.MAC.223, 4-Jun-84 23:01:34 by MOSER
;TCO 6.2059 - ALLOW EXEC XCT ONLY - FIX CRJOB - CHANGES FOR NON WHEEL STARTUP
; UPD ID= 4219, SNARK:<6.MONITOR>MEXEC.MAC.222, 14-May-84 18:55:34 by WEISBACH
;~6.0 - Add call to LAT host initialization (LATINI)
; UPD ID= 4211, SNARK:<6.MONITOR>MEXEC.MAC.221, 11-May-84 12:15:11 by GRANT
;In RUNDD2, add call to SRVCFS (moved here from CFSJYN in CFSSRV)
; UPD ID= 4207, SNARK:<6.MONITOR>MEXEC.MAC.220, 11-May-84 08:18:39 by GRANT
;In EGET, ERJMP after the GET%
; UPD ID= 4128, SNARK:<6.MONITOR>MEXEC.MAC.219, 25-Apr-84 11:07:42 by LOMARTIRE
;TCO 6.2046 - Record fork number for various job 0 forks created in RUNDD
; UPD ID= 4115, SNARK:<6.MONITOR>MEXEC.MAC.218, 24-Apr-84 12:59:05 by TGRADY
;TCO 6.2042 - Fix CFSILJ BUGCHK's from GETJI% called with .TTDES+n
; UPD ID= 4069, SNARK:<6.MONITOR>MEXEC.MAC.217, 11-Apr-84 19:12:50 by MOSER
;TCO 6.2023 - REMOVE ALL ERCAL INSTRUCTIONS
; UPD ID= 4062, SNARK:<6.MONITOR>MEXEC.MAC.215, 11-Apr-84 14:47:35 by GRANT
;In IPACHK, more graceful handling of no IPALOD or IPADMP
; UPD ID= 4012, SNARK:<6.MONITOR>MEXEC.MAC.214, 31-Mar-84 08:10:17 by GRANT
;Remove SEARCH of SCAPAR
; UPD ID= 4001, SNARK:<6.MONITOR>MEXEC.MAC.213, 28-Mar-84 20:46:37 by GRANT
;In IPACHK, look on PS:<SYSTEM> instead of SYSTEM:
; UPD ID= 3998, SNARK:<6.MONITOR>MEXEC.MAC.212, 28-Mar-84 17:22:15 by GUNN
;Revoke UPD ID 3741 - Put under FTNSPSRV conditional.
; UPD ID= 3946, SNARK:<6.MONITOR>MEXEC.MAC.211, 19-Mar-84 16:57:31 by MOSER
;TCO 6.2003 - ADD .JILJI FUNCTION OF GETJI
; UPD ID= 3924, SNARK:<6.MONITOR>MEXEC.MAC.210, 14-Mar-84 10:51:46 by TGRADY
;TCO 6.1998 - Fix ELOGO to compare user-specified job number to GBLJNO,
; not JOBNO
;
; UPD ID= 3869, SNARK:<6.MONITOR>MEXEC.MAC.209, 7-Mar-84 11:30:21 by LEACHE
;More TCO 6.1969 - move init of SWPMWF from MEXEC to PAGUTL
; UPD ID= 3850, SNARK:<6.MONITOR>MEXEC.MAC.207, 5-Mar-84 12:12:38 by GRANT
;In IPACHK, do dumping as well as loading.
; UPD ID= 3816, SNARK:<6.MONITOR>MEXEC.MAC.206, 29-Feb-84 17:04:39 by LEACHE
;TCO 6.1969 Change swappable monitor load to reflect single-pass load
; UPD ID= 3802, SNARK:<6.MONITOR>MEXEC.MAC.205, 29-Feb-84 01:44:07 by TGRADY
; Implement Global Job Numbers
; - In SYSINE, assign a Global Job number from CFS, and save it in GBLJNO
; - In STCRJB, return Global job number to CRJOB creator, put index in JOBONT
; - In RUNDD3, Initialize CFS Global Job Number database...
; - In HSYS41:, convert local job index to global job number for LGOUT Jsys
; - In LOG2, call JBAVAL to release Global job number just before HLTJB call.
; - In LOGJOB, Print Global job number during logout.
; - In ELOGO, translate user-specified global job number into local index
; - In .GJINF, use GBLJNO to return user's own job number, instead of JOBNO
; - In .GETAB, overhaul GTTAB table to use new GTJOB routine to translate
; user-specified Global Job number into local job index. Make the tables'
; 'size' be the highest legal Global Job number, MXGLBS, for range checking
; instead of NJOBS, which is only the highest index value.
; Also, create jacket routine TTY2GL to convert job index returned by
; GTBTTF to a global job number
; - In .GETJI, translate user-specified global job number into local index
; - In GETJI4, translate job index into Global job number before returning it.
; - In GETJIT table, return other jobs Global Job number (from JSB)
; - In ATACH1, same as .GETJI
;
; UPD ID= 3741, SNARK:<6.MONITOR>MEXEC.MAC.204, 22-Feb-84 17:27:14 by PAETZOLD
;Revoke previous edit until he gets it right.
; UPD ID= 3725, SNARK:<6.MONITOR>MEXEC.MAC.203, 22-Feb-84 11:39:52 by GUNN
;~6.0 - Add call to initialize Ethernet LLMOP Protocol Servers
; UPD ID= 3721, SNARK:<6.MONITOR>MEXEC.MAC.202, 22-Feb-84 05:36:57 by GRANT
;Call CFSJ0 from CHKR
; UPD ID= 3698, SNARK:<6.MONITOR>MEXEC.MAC.201, 15-Feb-84 21:28:14 by MURPHY
;Make definition of MDDT include section number so MDDT$G always works.
; UPD ID= 3741, SNARK:<6.MONITOR>MEXEC.MAC.204, 22-Feb-84 17:27:14 by PAETZOLD
;Revoke previous edit until he gets it right.
; UPD ID= 3725, SNARK:<6.MONITOR>MEXEC.MAC.203, 22-Feb-84 11:39:52 by GUNN
;~6.0 - Add call to initialize Ethernet LLMOP Protocol Servers
; UPD ID= 3721, SNARK:<6.MONITOR>MEXEC.MAC.202, 22-Feb-84 05:36:57 by GRANT
;Call CFSJ0 from CHKR
; UPD ID= 3698, SNARK:<6.MONITOR>MEXEC.MAC.201, 15-Feb-84 21:28:14 by MURPHY
;Make definition of MDDT include section number so MDDT$G always works.
; UPD ID= 3656, SNARK:<6.MONITOR>MEXEC.MAC.200, 4-Feb-84 10:32:35 by MILLER
;Call BRDTIM if CFS stuff is around
; UPD ID= 3648, SNARK:<6.MONITOR>MEXEC.MAC.199, 2-Feb-84 14:35:36 by MURPHY
;Ditto - fix bugs.
; UPD ID= 3640, SNARK:<6.MONITOR>MEXEC.MAC.198, 2-Feb-84 11:53:23 by MURPHY
;Different way of getting to BOOT to load swap mon.
; UPD ID= 3633, SNARK:<6.MONITOR>MEXEC.MAC.197, 1-Feb-84 22:08:42 by MURPHY
;Reference bug strings and pointers in symsec.
; UPD ID= 3565, SNARK:<6.MONITOR>MEXEC.MAC.196, 27-Jan-84 13:34:03 by PAETZOLD
;More TCO 6.1954 - Make CHKPER and DDPPER resident. Fix DDPWAT bug.
; UPD ID= 3557, SNARK:<6.MONITOR>MEXEC.MAC.195, 26-Jan-84 13:56:47 by PAETZOLD
;More TCO 6.1954 - Make CHKPER and DDPPER global. Make DDPDUE force DDMP.
; UPD ID= 3539, SNARK:<6.MONITOR>MEXEC.MAC.194, 25-Jan-84 15:14:38 by PAETZOLD
;TCO 6.1954 - Add code for DDPDUE and CHKDUE.
; UPD ID= 3510, SNARK:<6.MONITOR>MEXEC.MAC.193, 23-Jan-84 09:44:12 by PRATT
;TCO 6.1924 - Use "display type" block with "msg" block in WROPER
; UPD ID= 3490, SNARK:<6.MONITOR>MEXEC.MAC.192, 20-Jan-84 11:09:27 by CDUNN
;More TCO 6.1127 - Add new "temp" fork at startup to handle SCA buffer deferal
;requests until after DDMP has mounted PS.
; UPD ID= 3456, SNARK:<6.MONITOR>MEXEC.MAC.191, 13-Jan-84 17:16:14 by TBOYLE
;TCO 6.1933 - (RUNDD4) Do processing if SPRCNT not reset, and start
;SYSERR queue
; UPD ID= 3449, SNARK:<6.MONITOR>MEXEC.MAC.190, 12-Jan-84 14:22:41 by PAETZOLD
;TCO 6.1929 - Change FKJOBN to FKJBN
; UPD ID= 3420, SNARK:<6.MONITOR>MEXEC.MAC.189, 6-Jan-84 18:13:00 by MILLER
;Add CFSCOD conditional around call to CFTADC
; UPD ID= 3418, SNARK:<6.MONITOR>MEXEC.MAC.188, 6-Jan-84 09:07:27 by PRATT
;TCO 6.1912 - In WROPER, QU%NRS should be set in the arg block, not ac 1
; UPD ID= 3310, SNARK:<6.MONITOR>MEXEC.MAC.187, 13-Dec-83 18:16:03 by PAETZOLD
;TCO 6.1906 - Add code to update DDPTIM
; UPD ID= 3270, SNARK:<6.MONITOR>MEXEC.MAC.186, 7-Dec-83 09:06:17 by MILLER
;TCO 6.1806. Add calls to DTTIME
; UPD ID= 3192, SNARK:<6.MONITOR>MEXEC.MAC.185, 18-Nov-83 11:01:36 by PAETZOLD
;Do not call CHKIMP
; UPD ID= 3183, SNARK:<6.MONITOR>MEXEC.MAC.184, 17-Nov-83 14:15:55 by PRATT
;TCO 6.1796 - Lots of ERJMPs after TTMSGs in case of refusals
; UPD ID= 3151, SNARK:<6.MONITOR>MEXEC.MAC.183, 15-Nov-83 09:47:34 by PAETZOLD
;TCO 6.1862 - Fix problem with incorrect .XPCN2 word being returned in XPEEK
; UPD ID= 3114, SNARK:<6.MONITOR>MEXEC.MAC.182, 8-Nov-83 09:01:15 by MCINTEE
;~6.0 Remove NSP% jsys
; UPD ID= 3095, SNARK:<6.MONITOR>MEXEC.MAC.181, 3-Nov-83 23:37:50 by GROSSMAN
;TCO 6.1849 - Reset CRJTTY to a value of -1 only during CRJOB startup.
; UPD ID= 3084, SNARK:<6.MONITOR>MEXEC.MAC.180, 28-Oct-83 15:54:56 by HAUDEL
;TCO 6.1840 - Add an ERJMP .+1 after TTMSG
; UPD ID= 3004, SNARK:<6.MONITOR>MEXEC.MAC.179, 7-Oct-83 17:55:34 by GUNN
;~6.0 Add call to LLMRSJ from FLOGO to clean up LLMOP resources at logout.
; UPD ID= 2993, SNARK:<6.MONITOR>MEXEC.MAC.178, 5-Oct-83 14:49:33 by PAETZOLD
;More TCO 6.1733 - Remove call to IMPBEG. NCPFRK has gone away.
; UPD ID= 2978, SNARK:<6.MONITOR>MEXEC.MAC.177, 4-Oct-83 08:07:04 by MILLER
;TCO 6.1806 Once again.
; UPD ID= 2944, SNARK:<6.MONITOR>MEXEC.MAC.176, 27-Sep-83 20:35:08 by MILLER
;MORE TCO 6.1806. CHECK ON TAD IN CHKR
; UPD ID= 2930, SNARK:<6.MONITOR>MEXEC.MAC.175, 23-Sep-83 14:00:41 by MILLER
;More TCO 6.1806. Output date and time so operator knows
; UPD ID= 2926, SNARK:<6.MONITOR>MEXEC.MAC.174, 23-Sep-83 10:37:51 by MILLER
;TCO 6.1806. Try to get TAD from CFS
; UPD ID= 2914, SNARK:<6.MONITOR>MEXEC.MAC.173, 20-Sep-83 15:33:39 by LOMARTIRE
;TCO 6.1791 - Do not allow ATACH from batch unless WHEEL or OPR enabled
; UPD ID= 2842, SNARK:<6.MONITOR>MEXEC.MAC.172, 17-Aug-83 21:41:01 by MURPHY
;More 6.1525 - Separate section 0/1 maps. Remove NRCOD from sec 0 map.
; UPD ID= 2807, SNARK:<6.MONITOR>MEXEC.MAC.171, 9-Aug-83 11:46:15 by MURPHY
;Move MOVCST from here to PAGUTL.
; UPD ID= 2797, SNARK:<6.MONITOR>MEXEC.MAC.170, 4-Aug-83 00:30:32 by LEACHE
;TCO 6.1641 Change swappable freespace initialization
; UPD ID= 2768, SNARK:<6.MONITOR>MEXEC.MAC.169, 25-Jul-83 17:48:48 by MCCOLLUM
;TCO 6.1743 - Add XPEEK% JSYS
; UPD ID= 2749, SNARK:<6.MONITOR>MEXEC.MAC.168, 22-Jul-83 16:38:22 by PAETZOLD
;TCO 6.1733 - Reflect that NCP has gone away.
; UPD ID= 2745, SNARK:<6.MONITOR>MEXEC.MAC.167, 22-Jul-83 16:33:16 by MURPHY
;More 6.1568 - Make COFTIM settable by SMON.
;TCO 6.1719 - Customer-selectable hangup action.
; UPD ID= 2673, SNARK:<6.MONITOR>MEXEC.MAC.166, 5-Jul-83 16:04:54 by MILLER
;Various changes for CFS CI error recovery
; UPD ID= 2669, SNARK:<6.MONITOR>MEXEC.MAC.165, 5-Jul-83 15:48:20 by MOSER
;TCO 6.1568 - USE COFMIN AS VALUE FOR CARRIER OFF WAIT BEFORE LOGOUT
; UPD ID= 2667, SNARK:<6.MONITOR>MEXEC.MAC.164, 5-Jul-83 13:32:48 by MURPHY
;More 6.1525 - Remove hidden symbol table, add symtab in separate section.
; UPD ID= 2602, SNARK:<6.MONITOR>MEXEC.MAC.163, 20-Jun-83 15:40:03 by HALL
;TCO 6.1689 - Move fork tables to extended section
; Reference FKINT bits via DEFSTR
; UPD ID= 2577, SNARK:<6.MONITOR>MEXEC.MAC.162, 10-Jun-83 17:39:29 by PAETZOLD
;TCO 6.1680 - Turn on QU%NRS in WROPR0
; UPD ID= 2546, SNARK:<6.MONITOR>MEXEC.MAC.161, 31-May-83 16:44:49 by MURPHY
;TCO 6.1525 - Move subsys names tables to ext section.
; UPD ID= 2382, SNARK:<6.MONITOR>MEXEC.MAC.160, 29-Apr-83 15:03:02 by MCINTEE
;TCO 6.1630 - MONBK/PSIMB fix
; UPD ID= 2286, SNARK:<6.MONITOR>MEXEC.MAC.158, 16-Apr-83 19:14:33 by PAETZOLD
;TCO 6.1557 - TCP Merge - Delete old edit history - Update copyright.
; UPD ID= 2245, SNARK:<6.MONITOR>MEXEC.MAC.157, 12-Apr-83 13:15:09 by MCINTEE
;Remove IFNDEF FTNSPSRV
; UPD ID= 2219, SNARK:<6.MONITOR>MEXEC.MAC.156, 8-Apr-83 13:06:09 by MILLER
;TCO 6.1602 again. Fix call to RUNDII in IPACHK
; UPD ID= 2218, SNARK:<6.MONITOR>MEXEC.MAC.155, 8-Apr-83 12:29:03 by MILLER
;Fix IPACHK some
; UPD ID= 2216, SNARK:<6.MONITOR>MEXEC.MAC.154, 8-Apr-83 09:37:05 by MILLER
;Once more. Wait for KLIPA reload at system start-up
; UPD ID= 2215, SNARK:<6.MONITOR>MEXEC.MAC.153, 8-Apr-83 08:36:24 by MILLER
;TCO 6.1602. Load KLIPA microcode when needed
; UPD ID= 2205, SNARK:<6.MONITOR>MEXEC.MAC.152, 8-Apr-83 05:58:57 by WACHS
;TCO 6.1604 - Call KLIPA initialization late
; UPD ID= 2130, SNARK:<6.MONITOR>MEXEC.MAC.151, 2-Apr-83 22:46:44 by LEACHE
;TCO 6.1247 Add centralized penalties for bad passwords
; UPD ID= 2111, SNARK:<6.MONITOR>MEXEC.MAC.149, 28-Mar-83 19:43:31 by MILLER
;TCO 6.1094. Get rid of GETALF
; UPD ID= 2102, SNARK:<6.MONITOR>MEXEC.MAC.148, 28-Mar-83 17:43:19 by MURPHY
;TCO 6.1472 - Minor cleanup re. LSTERR.
; UPD ID= 1995, SNARK:<6.MONITOR>MEXEC.MAC.147, 15-Mar-83 10:58:40 by MILLER
;TCO 6.1544. Call MAPPHQ when mapping BOOT
; UPD ID= 1967, SNARK:<6.MONITOR>MEXEC.MAC.146, 10-Mar-83 17:57:28 by CDUNN
;More TCO 6.1127 - Add lost edit to call SC.RAP to clean up SCA data as
;needed.
; UPD ID= 1929, SNARK:<6.MONITOR>MEXEC.MAC.145, 7-Mar-83 21:02:14 by CDUNN
;Change default to include KLIPA code
; UPD ID= 1913, SNARK:<6.MONITOR>MEXEC.MAC.144, 3-Mar-83 13:05:37 by MCINTEE
;TCO 6.1532 - Remove SE1ENT & SE0ENT in routine STCJB2. Put in a TSTMS0.
; UPD ID= 1908, SNARK:<6.MONITOR>MEXEC.MAC.143, 2-Mar-83 17:30:32 by MILLER
;TCO 6.1094 again. CALL CFSJYN
; UPD ID= 1904, SNARK:<6.MONITOR>MEXEC.MAC.142, 2-Mar-83 15:44:36 by MILLER
;TCO 6.1094 again. Move MNTPS yet again, and call FILRST with it
; UPD ID= 1888, SNARK:<6.MONITOR>MEXEC.MAC.141, 1-Mar-83 10:37:34 by MILLER
;TCO 6.1094. Move call to MNTPS
; UPD ID= 1880, SNARK:<6.MONITOR>MEXEC.MAC.140, 27-Feb-83 22:05:25 by MURPHY
;More TCO 6.1514 and 6.1142 - Use ERJMPS after DIRST in LOGBUG.
;TCO 6.1525 - Get rid of unneeded XJRSTs.
; UPD ID= 1860, SNARK:<6.MONITOR>MEXEC.MAC.139, 22-Feb-83 20:24:48 by MILLER
;TCO 6.1520. Enable disk preallocation after CHECKD runs
; UPD ID= 1858, SNARK:<6.MONITOR>MEXEC.MAC.138, 22-Feb-83 14:12:36 by MILLER
;TCO 6.1094. Add call to MNTPS during start-up
; UPD ID= 1847, SNARK:<6.MONITOR>MEXEC.MAC.137, 21-Feb-83 16:21:26 by MURPHY
;More 6.1507 - JOBCOF should jump to FLOGO1 not FLOGO after UPDL reset.
; UPD ID= 1842, SNARK:<6.MONITOR>MEXEC.MAC.136, 20-Feb-83 22:17:36 by MURPHY
;TCO 6.1514 - Use ITERX instead of JRST ITRAP.
; and revise the fixup to the fix to the fix to 6.1142 now that DIRST works.
; UPD ID= 1821, SNARK:<6.MONITOR>MEXEC.MAC.135, 18-Feb-83 07:32:51 by MCINTEE
;FIXUP THE FIX TO THE FIX TO 6.1142 - USE A TRVAR, NOT THE STACK
; UPD ID= 1814, SNARK:<6.MONITOR>MEXEC.MAC.134, 16-Feb-83 15:03:35 by MCINTEE
;FIX THE FIX TO 6.1142
; UPD ID= 1810, SNARK:<6.MONITOR>MEXEC.MAC.133, 15-Feb-83 14:22:21 by MILLER
;TCO 6.1094. Improve call to GETALF
; UPD ID= 1809, SNARK:<6.MONITOR>MEXEC.MAC.132, 15-Feb-83 10:16:24 by MURPHY
;TCO 6.1472 - Clean up uses of MCENTR.
;TCO 6.1506 - BUGCHK on unexpected job 0 interrupts.
;TCO 6.1507 - Fix MONPDL in JOBCOF.
;Fix to 6.1142 - Pointer clobbered if DIRST fails in LOGBUG.
; UPD ID= 1773, SNARK:<6.MONITOR>MEXEC.MAC.131, 5-Feb-83 18:55:25 by MILLER
;TCO 6.1094. Use DDMPF to flush pages for CFS
; UPD ID= 1768, SNARK:<6.MONITOR>MEXEC.MAC.130, 4-Feb-83 11:18:53 by MILLER
;TCO 6.1094. Distinguish DDMP for CFS from regular cycle
; UPD ID= 1745, SNARK:<6.MONITOR>MEXEC.MAC.129, 2-Feb-83 18:44:23 by MILLER
;TCO 6.1142. Some code clean ups. More to come...
; UPD ID= 1707, SNARK:<6.MONITOR>MEXEC.MAC.128, 27-Jan-83 20:06:53 by MILLER
;TCO 6.1094.CFS "get directory allocation".
; UPD ID= 1700, SNARK:<6.MONITOR>MEXEC.MAC.127, 26-Jan-83 14:25:30 by WEETON
;TCO 6.1401 - Fix ITRLGO BUGCHKs and WAITNI BUGHLTs
; UPD ID= 1680, SNARK:<6.MONITOR>MEXEC.MAC.126, 19-Jan-83 15:40:31 by MCINTEE
;TCO 6.1471 - MOVE SEBINI FROM EXEC0
; UPD ID= 1661, SNARK:<6.MONITOR>MEXEC.MAC.125, 15-Jan-83 16:45:12 by CHALL
;REMOVE RS(SWPMBP,1), WHICH IS DUPLICATED IN STG
; UPD ID= 1650, SNARK:<6.MONITOR>MEXEC.MAC.124, 13-Jan-83 17:10:37 by CHALL.WIZARD
;Add call to .NSPRS at SJLGO4 (to clean up NSP% DECnet lines for top fork)
; UPD ID= 1630, SNARK:<6.MONITOR>MEXEC.MAC.123, 7-Jan-83 12:39:46 by MCINTEE
;TCO 6.1445 - Monitor version number in SYSJOB.EXE
; UPD ID= 1619, SNARK:<6.MONITOR>MEXEC.MAC.122, 5-Jan-83 10:27:35 by HALL
;TCO 6.1000 and 6.1094
; Fix code at RUNDE1 to set up context correctly for all processors
; Clean up the comments a bit. Move JB0INT to be near CHKR
; UPD ID= 1615, SNARK:<6.MONITOR>MEXEC.MAC.121, 4-Jan-83 11:30:55 by MILLER
;TCO 6.1094. Set up MONBK for new CHKR fork
; UPD ID= 1550, SNARK:<6.MONITOR>MEXEC.MAC.120, 21-Dec-82 09:16:12 by MILLER
;TCO 6.1094. Enhance DDMP error code by creating routine DDMPER
; UPD ID= 1539, SNARK:<6.MONITOR>MEXEC.MAC.119, 20-Dec-82 17:27:55 by NICHOLS
;Add FTNSPSRV to distinguish between release 6.0 and 6.1
;Make SYSJOB.EXE into 6-1-SYSJOB.EXE for 6.1 monitors
;Add initialization of CTERM host and other DECnet-36 features
;TCO 6.1030 - DAPLGO added to logout code (McIntee)
; UPD ID= 1511, SNARK:<6.MONITOR>MEXEC.MAC.118, 2-Dec-82 15:17:55 by MOSER
;TCO 6.1110 - CHECK CHKAC ARGUMENT BLOCK LENGTH CORRECTLY
; UPD ID= 1491, SNARK:<6.MONITOR>MEXEC.MAC.117, 30-Nov-82 14:59:23 by MOSER
;TCO 6.1109 - LET CHKAC SUCCEED IF CONNECTED DIRECTORY WRONG BUT ACCESS OK
; UPD ID= 1490, SNARK:<6.MONITOR>MEXEC.MAC.116, 30-Nov-82 12:32:58 by HAUDEL
;More TCO 6.1357
; UPD ID= 1486, SNARK:<6.MONITOR>MEXEC.MAC.115, 29-Nov-82 14:19:55 by GRANT
;TCO 6.1010 - Remove EA.ENT at USGINI, startup runs totally in section 1 now
; UPD ID= 1479, SNARK:<6.MONITOR>MEXEC.MAC.114, 29-Nov-82 09:26:47 by GRANT
;TCO 6.1010 - In EXEC0, add call to MOVCST
; UPD ID= 1466, SNARK:<6.MONITOR>MEXEC.MAC.113, 18-Nov-82 13:59:16 by MOSER
;TCO 6.1380 - PREVENT HUNG JOBS AT LOGOUT
; UPD ID= 1461, SNARK:<6.MONITOR>MEXEC.MAC.112, 18-Nov-82 12:59:42 by MOSER
;TCO 6.1353 - PASS CORRECT ARGS TO ACJ FOR ATACH
; UPD ID= 1454, SNARK:<6.MONITOR>MEXEC.MAC.111, 17-Nov-82 14:15:54 by COBB
;TCO 5.1.1107 - Don't PUSH in STKVAR context at LDTACH+10 or so
; UPD ID= 1452, SNARK:<6.MONITOR>MEXEC.MAC.110, 17-Nov-82 08:23:57 by HAUDEL
;More TCO 6.1357
; UPD ID= 1432, SNARK:<6.MONITOR>MEXEC.MAC.109, 10-Nov-82 10:21:04 by HAUDEL
;TCO 6.1357 - CHANGE SHUTDOWN MESSAGE,ADD CTY MESSAGE
; UPD ID= 1430, SNARK:<6.MONITOR>MEXEC.MAC.108, 9-Nov-82 16:34:53 by WEETON
;Fix TCO 6.1344
; UPD ID= 1426, SNARK:<6.MONITOR>MEXEC.MAC.107, 8-Nov-82 13:52:49 by WEETON
;TCO 6.1344 - Allow enabled WHEEL or OPERATORs to load any program in top fork
; UPD ID= 1405, SNARK:<6.MONITOR>MEXEC.MAC.106, 3-Nov-82 07:00:12 by GRANT
;More TCO 6.1010 - Make RUNDD start in section 1, make USGINI run in section 1.
;Also, print out RUNNING DDMP sooner.
; UPD ID= 1400, SNARK:<6.MONITOR>MEXEC.MAC.105, 2-Nov-82 01:42:01 by CDUNN
;More TCO 6.1127 - Make KACCHG reflect the new keep alive scheme for the
;CI emulator
; UPD ID= 1397, SNARK:<6.MONITOR>MEXEC.MAC.104, 1-Nov-82 14:42:46 by LEACHE
;TCO 6.1342 Add MONVER
; UPD ID= 1386, SNARK:<6.MONITOR>MEXEC.MAC.103, 27-Oct-82 23:07:58 by CDUNN
;More TCO 6.1127 - Add further support for CI emulator keep alive
; UPD ID= 1379, SNARK:<6.MONITOR>MEXEC.MAC.102, 25-Oct-82 14:40:02 by MILLER
;TCO 6.1094. Create CFS section at system start up
; UPD ID= 1366, SNARK:<6.MONITOR>MEXEC.MAC.101, 22-Oct-82 03:52:48 by CDUNN
;More TCO 6.1127, add short routine to job init code to update the CI
;emulation keep alive boundries...
; UPD ID= 1348, SNARK:<6.MONITOR>MEXEC.MAC.99, 18-Oct-82 13:27:46 by COBB
;TCO 6.1315 - Clear CRJTTY after assignment to prevent 2 jobs on 1 tty bug
; UPD ID= 1345, SNARK:<6.MONITOR>MEXEC.MAC.98, 18-Oct-82 11:53:09 by MILLER
;TCO 6.1094. Enhance DDMPA some more
; UPD ID= 1335, SNARK:<6.MONITOR>MEXEC.MAC.97, 13-Oct-82 17:22:13 by MILLER
;Rerun DDMP right away if need be
; UPD ID= 1330, SNARK:<6.MONITOR>MEXEC.MAC.96, 12-Oct-82 17:50:23 by MILLER
;Restart DDMP soon if someone needed it while it was running
; UPD ID= 1301, SNARK:<6.MONITOR>MEXEC.MAC.95, 8-Oct-82 14:35:14 by MILLER
;Put DDMP in its own fork for CFS (TCO 6.1094)
; UPD ID= 1259, SNARK:<6.MONITOR>MEXEC.MAC.94, 29-Sep-82 20:20:00 by MILLER
;Make sure time is not negative
; UPD ID= 1251, SNARK:<6.MONITOR>MEXEC.MAC.93, 27-Sep-82 23:38:29 by MILLER
;Make sure job 0 wakes up in time to run DDMP
; UPD ID= 1247, SNARK:<6.MONITOR>MEXEC.MAC.92, 27-Sep-82 22:24:26 by MILLER
;CFS -- Fix DDMP restart
; UPD ID= 1240, SNARK:<6.MONITOR>MEXEC.MAC.91, 24-Sep-82 14:58:10 by MILLER
;Make DDMP retry wait a bit before trying again
; UPD ID= 1237, SNARK:<6.MONITOR>MEXEC.MAC.90, 24-Sep-82 12:27:19 by LEACHE
;TCO 6.1273 Add MS%ASG
; UPD ID= 1230, SNARK:<6.MONITOR>MEXEC.MAC.89, 24-Sep-82 11:48:26 by MOSER
;TCO 5.1614 MAKE CJ%ETF WORK WITH CJ%FIL.
; UPD ID= 1226, SNARK:<6.MONITOR>MEXEC.MAC.88, 23-Sep-82 23:44:50 by MILLER
;Handle failure from DDMP
; UPD ID= 1178, SNARK:<6.MONITOR>MEXEC.MAC.87, 14-Sep-82 11:07:46 by MOSER
;TCO 6.1264 - CORRECT ARGS TO ACJ AT JOBCF1
; UPD ID= 1159, SNARK:<6.MONITOR>MEXEC.MAC.86, 10-Sep-82 13:30:19 by MILLER
;tco 6.1259. Make JOBCOF go to FLOGO whnever it wants to LOGOUT
; UPD ID= 1151, SNARK:<6.MONITOR>MEXEC.MAC.85, 7-Sep-82 11:10:27 by MILLER
;TCO 6.1255. Suppress start-up dialog if DBUGSW = 3
; UPD ID= 1139, SNARK:<6.MONITOR>MEXEC.MAC.84, 3-Sep-82 15:13:55 by MCINTEE
;More TCO 6.1184 - Eliminate unwanted OKSKED from ATACH code
; UPD ID= 1097, SNARK:<6.MONITOR>MEXEC.MAC.83, 19-Aug-82 13:36:37 by MCINTEE
;TCO 6.1030 - Add call to DAPLGO during logout
; UPD ID= 1075, SNARK:<6.MONITOR>MEXEC.MAC.82, 10-Aug-82 14:19:26 by LEACHE
;TCO 6.1223 - Make "WHY RELOAD" accept a lowercase answer.
; UPD ID= 1009, SNARK:<6.MONITOR>MEXEC.MAC.81, 28-Jul-82 08:21:04 by COBB
;MORE TCO 6.1193 - Fix typo in previous edit...
; UPD ID= 1008, SNARK:<6.MONITOR>MEXEC.MAC.80, 27-Jul-82 15:19:05 by COBB
;TCO 6.1193 - ZERO out count of NOSKED p-faults after startup complete AND...
;TCO 6.1194 - Add call to ENQFKR when killing top fork to release ENQ locks
; UPD ID= 984, SNARK:<6.MONITOR>MEXEC.MAC.79, 12-Jul-82 13:52:05 by CDUNN
;TCO 6.1184 Fix ATACH JSYS to allow attach to terminal assigned by calling job
; UPD ID= 980, SNARK:<6.MONITOR>MEXEC.MAC.78, 7-Jul-82 16:16:30 by COBB
;TCO 6.1183 - Change SYSTEM:EXEC.EXE to DEFAULT-EXEC:
; UPD ID= 859, SNARK:<6.MONITOR>MEXEC.MAC.77, 7-Jun-82 09:39:33 by MURPHY
;TCO 6.1147 - Move bugdefs from BUGS.MAC to here and put them in-line.
; UPD ID= 779, SNARK:<6.MONITOR>MEXEC.MAC.76, 24-May-82 09:12:23 by HALL
;TCO 6.1144 - REMOVE "BLT SWAPPABLE MONITOR"
; UPD ID= 777, SNARK:<6.MONITOR>MEXEC.MAC.75, 21-May-82 11:41:57 by CDUNN
;TCO 6.1127 - Add code to call CISRV for a periodic check from job 0.
; UPD ID= 763, SNARK:<6.MONITOR>MEXEC.MAC.74, 19-May-82 10:09:54 by MILLER
;;TCO 6.1142. Send system messages to ORION
; UPD ID= 719, SNARK:<6.MONITOR>MEXEC.MAC.73, 11-May-82 02:15:55 by CDUNN
;More TCO 6.127 - Add free space assurance for SCA in CHKR routine
; UPD ID= 707, SNARK:<6.MONITOR>MEXEC.MAC.72, 9-May-82 13:02:19 by HALL
;TCO 6.1000- Support the 2080
; Make flags word for user mode include user AC block (EXEC0, EXECI1,
; EXBUGH, HSYS4, EXPAL0, JOBCOF
; At EXECI, preserve full word of flags instead of left half only
; Make CHKR use XJRST to get to section 1
; UPD ID= 540, SNARK:<6.MONITOR>MEXEC.MAC.71, 20-Mar-82 19:42:50 by PAETZOLD
;TCO 5.1766 - Turn on FH%EPN in PMAP call in SJLGO4. PM%EPN does not work.
; UPD ID= 471, SNARK:<6.MONITOR>MEXEC.MAC.70, 12-Mar-82 14:41:32 by PAETZOLD
;TCO 5.1753 - Turn on PM%EPN in PMAP call in logout code. Prevents PAGLCKs
; UPD ID= 433, SNARK:<6.MONITOR>MEXEC.MAC.69, 4-Mar-82 13:59:51 by MURPHY
;TCO 5.1744 - Refers to changes made approx June, 1980. Make default
; settings of system messages more like release 4.
; UPD ID= 379, SNARK:<6.MONITOR>MEXEC.MAC.68, 4-Feb-82 09:55:41 by HALL
;TCO 6.1000 - Support the 2080
; Remove call to KDPINI. Don't need it now that KS isn't supported
; UPD ID= 347, SNARK:<6.MONITOR>MEXEC.MAC.67, 24-Jan-82 23:50:20 by MURPHY
;TCO 5.1697 - XSSEV%, etc. Move GETPAT and GETDMS to FORK.MAC
; UPD ID= 313, SNARK:<6.MONITOR>MEXEC.MAC.66, 18-Jan-82 10:50:17 by MILLER
; UPD ID= 407, SNARK:<5.MONITOR>MEXEC.MAC.64, 18-Jan-82 10:37:36 by MILLER
;TCO 5.1678 again. Enhance check in ATACH for specific TTY designator
; UPD ID= 305, SNARK:<6.MONITOR>MEXEC.MAC.65, 15-Jan-82 16:27:34 by MILLER
;More TCO 5.1678. Check for same job number
; UPD ID= 302, SNARK:<6.MONITOR>MEXEC.MAC.64, 15-Jan-82 14:04:49 by MILLER
;TCO 5.1678. Make detach of object job in ATACH race-free.
; UPD ID= 386, SNARK:<5.MONITOR>MEXEC.MAC.60, 9-Jan-82 18:30:36 by MILLER
;TCO 5.1661. Unlatch MOS cotrollers after TGHA runs
;MORE OF TCO 6.1054
; UPD ID= 278, SNARK:<6.MONITOR>MEXEC.MAC.61, 6-Jan-82 10:11:09 by MILLER
;TCO 6.1054. ADD GTOKM IN ATTACH.
; UPD ID= 191, SNARK:<6.MONITOR>MEXEC.MAC.60, 6-Nov-81 13:39:04 by MURPHY
;Make monitor forks start in section 1
; UPD ID= 162, SNARK:<6.MONITOR>MEXEC.MAC.59, 23-Oct-81 15:23:34 by COBB
; UPD ID= 247, SNARK:<5.MONITOR>MEXEC.MAC.58, 6-Oct-81 15:21:24 by MOSER
;MORE TCO 5.1512 FIX A BUG.
; UPD ID= 222, SNARK:<5.MONITOR>MEXEC.MAC.57, 28-Sep-81 16:20:34 by PAETZOLD
;TCO 5.1544 - CORRECT CALCULATION FOR UPPER LIMIT OF VBOOT GROUP IN GSMDSK
; UPD ID= 209, SNARK:<5.MONITOR>MEXEC.MAC.56, 23-Sep-81 13:41:05 by MURPHY
;DITTO
; UPD ID= 187, SNARK:<5.MONITOR>MEXEC.MAC.55, 16-Sep-81 17:50:34 by MURPHY
;TCO 5.1514 - Start SYSERR fork earlier in RUNDD so messages from FE don't pile up.
; UPD ID= 184, SNARK:<5.MONITOR>MEXEC.MAC.54, 16-Sep-81 12:09:35 by SCHMITT
;More TCO 4.1051 - Remove definition of USGMUP, it is in STG
; UPD ID= 182, SNARK:<5.MONITOR>MEXEC.MAC.53, 15-Sep-81 16:51:13 by SCHMITT
;TCO 4.1.1051 - Make system restart entry include Monitor uptime
; UPD ID= 179, SNARK:<5.MONITOR>MEXEC.MAC.52, 15-Sep-81 16:26:04 by MOSER
;TCO 5.1512 ADD SE1ENT TO JOBCOF.
; UPD ID= 134, SNARK:<5.MONITOR>MEXEC.MAC.51, 1-Sep-81 16:22:40 by GRANT
;Fix the check for DETACHed before CALL TTHNGU in LOG1 - dataset line was not
;being hung up if user was not logged in
; UPD ID= 57, SNARK:<5.MONITOR>MEXEC.MAC.50, 21-Jul-81 15:22:56 by GRANT
;Change "PS:" to "system structure"
;TCO 5.1375 - Fix bugs in ATACH JSYS
; UPD ID= 19, SNARK:<5.MONITOR>MEXEC.MAC.49, 12-Jul-81 15:44:27 by PAETZOLD
;Replace .FHSLF with .TTDES at DETMS3+3
; UPD ID= 18, SNARK:<5.MONITOR>MEXEC.MAC.48, 11-Jul-81 17:45:10 by PAETZOLD
;TCO 5.1407 - Make sure we dont ask to lock more memory than is on
; replacable queue in GSMD2
; UPD ID= 2289, SNARK:<5.MONITOR>MEXEC.MAC.47, 2-Jul-81 13:36:37 by PAETZOLD
;TCO 5.1393 - Change reference of BUGINT from immediate to full word
; UPD ID= 2265, SNARK:<5.MONITOR>MEXEC.MAC.46, 26-Jun-81 18:07:46 by MURPHY
;TCO 5.1376 - JOBCOF, FLOGO, FRKNOP
; UPD ID= 2125, SNARK:<5.MONITOR>MEXEC.MAC.45, 4-Jun-81 10:11:31 by GRANT
;Make sure all 23 bits of address get returned in GETSEG
; UPD ID= 2069, SNARK:<5.MONITOR>MEXEC.MAC.44, 22-May-81 16:48:23 by ZIMA
;TCO 5.1344 - Correct ATACH and DTACH privilege checking for batch jobs.
; UPD ID= 2056, SNARK:<5.MONITOR>MEXEC.MAC.43, 21-May-81 10:46:10 by SCHMITT
;More of TCO 5.1308
; UPD ID= 1967, SNARK:<5.MONITOR>MEXEC.MAC.42, 8-May-81 14:24:43 by SCHMITT
;More of TCO 5.1308 - Check for system shutdown in CHKR loop
; UPD ID= 1941, SNARK:<5.MONITOR>MEXEC.MAC.41, 5-May-81 17:06:32 by SCHMITT
;TCO 5.1308 - Latch HSYST1 to -1 when system shutdown
; UPD ID= 1921, SNARK:<5.MONITOR>MEXEC.MAC.40, 1-May-81 11:33:52 by PAETZOLD
;TCO 5.1301 add SCOUNT to GETAB tables, also bump SCOUNT in SETSN
; UPD ID= 1910, SNARK:<5.MONITOR>MEXEC.MAC.39, 30-Apr-81 16:29:05 by CHALL
;Inform the victim of a LOGOUT about the killer and his terminal
; UPD ID= 1817, SNARK:<5.MONITOR>MEXEC.MAC.38, 17-Apr-81 09:42:10 by WACHS
;TCO 5.1287 Restrict the possible answers to Why Reload question
; UPD ID= 1778, SNARK:<5.MONITOR>MEXEC.MAC.37, 31-Mar-81 17:43:13 by MURPHY
;Default is shutdown messages at 5 and 1 min
; UPD ID= 1719, SNARK:<5.MONITOR>MEXEC.MAC.36, 16-Mar-81 16:37:05 by MURPHY
;Add "PS:" to system expunge message
; UPD ID= 1569, SNARK:<5.MONITOR>MEXEC.MAC.35, 19-Feb-81 14:07:50 by HALL
;TCO 5.1180 - Move DST to non-zero section
; Fix EXEC0 so that it can run in section 1, because call to SETMPG
; can get to GDSTX
; BSRAD - Use extra stack location and avoid clobbering PC
; GOTSWM - Change BLT to initialize SYSFK table
; UPD ID= 1496, SNARK:<5.MONITOR>MEXEC.MAC.34, 26-Jan-81 13:25:47 by ENGEL
;GET RID OF THE LCS CALLS. NOT PART OF NEXT RELEASE ANYMORE
; UPD ID= 1485, SNARK:<5.MONITOR>MEXEC.MAC.33, 24-Jan-81 23:20:07 by ZIMA
;TCO 5.1240 - Fix connect time calculation in CPGCON checkpoint routine.
; UPD ID= 1479, SNARK:<5.MONITOR>MEXEC.MAC.32, 22-Jan-81 12:37:41 by ZIMA
;TCO 5.1238 - expunge properly on logout.
; UPD ID= 1292, SNARK:<5.MONITOR>MEXEC.MAC.31, 18-Nov-80 18:11:05 by MURPHY
;FIX BUG IN JOBCOF - MAKE DETACH HAPPEN BEFORE LOGOUT
; UPD ID= 1286, SNARK:<5.MONITOR>MEXEC.MAC.30, 18-Nov-80 14:40:13 by OSMAN
; UPD ID= 1248, SNARK:<5.MONITOR>MEXEC.MAC.29, 7-Nov-80 15:01:32 by SCHMITT
;TCO 5.1194 - Fix code at USGIN7 to not cause CHKPNT errors
; UPD ID= 1221, SNARK:<5.MONITOR>MEXEC.MAC.28, 2-Nov-80 11:48:37 by HALL
;TCO 5.1180 - MOVE THE DST TO NON-ZERO SECTION
; CHKR - RUN IN SECTION 1
; GSMDX - RUN IN SECTION 1
;tco 5.1189 - Make entry vector two words
; UPD ID= 1221, SNARK:<5.MONITOR>MEXEC.MAC.28, 2-Nov-80 11:48:37 by HALL
;TCO 5.1180 - MOVE THE DST TO NON-ZERO SECTION
; CHKR - RUN IN SECTION 1
; GSMDX - RUN IN SECTION 1
; UPD ID= 1143, SNARK:<5.MONITOR>MEXEC.MAC.27, 8-Oct-80 15:14:08 by MURPHY
;BUG IN JOBCOF
; UPD ID= 1103, SNARK:<5.MONITOR>MEXEC.MAC.26, 2-Oct-80 09:28:08 by MURPHY
;DITTO
; UPD ID= 1081, SNARK:<5.MONITOR>MEXEC.MAC.25, 1-Oct-80 11:53:31 by MURPHY
;FIX ACVAR, ETC.
; UPD ID= 975, SNARK:<5.MONITOR>MEXEC.MAC.24, 29-Aug-80 08:41:47 by ENGEL
;ADD LCS INITIALIZATION CALL
; UPD ID= 972, SNARK:<5.MONITOR>MEXEC.MAC.23, 25-Aug-80 16:53:39 by HALL
;TCO 5.1139 - ADD FAILING PC AND LSTERR TO OUTPUT WHEN FORK 0 CRASHES
; UPD ID= 965, SNARK:<5.MONITOR>MEXEC.MAC.22, 25-Aug-80 16:28:07 by ENGEL
;TCO 5.1136 - ADD DEVLKK
; UPD ID= 932, SNARK:<5.MONITOR>MEXEC.MAC.21, 20-Aug-80 14:59:31 by LYONS
;TCO 5.1062 WRITE VERIFICATION ON WRITE FOR DISKS
; UPD ID= 841, SNARK:<5.MONITOR>MEXEC.MAC.20, 5-Aug-80 16:20:06 by OSMAN
;tco 5.1109 - Add PDV support to SSAVE and GET
; UPD ID= 812, SNARK:<5.MONITOR>MEXEC.MAC.19, 30-Jul-80 11:03:46 by MURPHY
;WEFLAG - DON'T WRITE-PROTECT MONITOR IF NON-0
; UPD ID= 789, SNARK:<5.MONITOR>MEXEC.MAC.18, 23-Jul-80 17:20:10 by R.ACE
;TCO 5.1112 - REMOVE VESTIGIAL "MOVE T1,FORKX" AT JOBCF1+2
; UPD ID= 747, SNARK:<5.MONITOR>MEXEC.MAC.17, 8-Jul-80 17:50:12 by HALL
;FIX LYONS' EDIT TO CHKUM1
; UPD ID= 723, SNARK:<5.MONITOR>MEXEC.MAC.15, 2-Jul-80 11:28:18 by LYONS
;Fix ILMNRF in SAVE% JSYS by maping read only page to non-existant page
; with no access, and fooling SAVEB1 into thinking page is really there
;Fix missing checks for tty detached when we get CTRLTT in LOG1
;Fix time race in CHKUM1 that can cause J0NRUN
;Fix reason why system down as told to IMP
;Fix CTY login after ^ECEASE if it was prohibited before
;ARPAnet can cause UPDL overflows if user in JSYS which locks tty data
;A job with PSI for carrier off does not get it until reattach time.
; UPD ID= 703, SNARK:<5.MONITOR>MEXEC.MAC.14, 26-Jun-80 09:52:06 by LYONS
;Add code to call ACJ on an implicit logout (i.e. thru a hangup of a dataset)
; UPD ID= 700, SNARK:<5.MONITOR>MEXEC.MAC.13, 25-Jun-80 17:26:40 by MURPHY
;FIRST SHUTDOWN MESSAGE CONTROLLED BY SF%MS1
; UPD ID= 698, SNARK:<5.MONITOR>MEXEC.MAC.12, 25-Jun-80 17:05:46 by GRADY
;TCO 5.1079 - FIX RACE AT LDTAC2, BUT UNLOKK DEVLKK AND GO OKINT TOO.
; UPD ID= 666, SNARK:<5.MONITOR>MEXEC.MAC.10, 16-Jun-80 19:06:25 by LYONS
;FIX RACE AT LDTAC2, WHERE CTRLTT MAY NOT BE RIGHT
; UPD ID= 662, SNARK:<5.MONITOR>MEXEC.MAC.9, 16-Jun-80 17:23:27 by KONEN
;TCO 5.1063 - REMOVE PS: AS NAME OF PRIMARY STRUCTURE
; UPD ID= 597, SNARK:<5.MONITOR>MEXEC.MAC.8, 3-Jun-80 17:45:02 by MURPHY
;FACTSW BITS TO CONTROL SYSTEM MESSAGES
; UPD ID= 498, SNARK:<5.MONITOR>MEXEC.MAC.7, 30-Apr-80 15:06:35 by GRANT
;TCO 5.1030 - Add description to ?FULL
; UPD ID= 468, SNARK:<5.MONITOR>MEXEC.MAC.6, 23-Apr-80 15:52:58 by LYONS
;pushed literals as PC dont allow for non zero sections
; UPD ID= 445, SNARK:<5.MONITOR>MEXEC.MAC.5, 15-Apr-80 11:01:18 by HALL
;MOVE LOGDES AND JB0TT INTO RSDAT
; UPD ID= 401, SNARK:<5.MONITOR>MEXEC.MAC.4, 2-Apr-80 15:52:50 by HALL
;FIX LOWER CASE IN PREVIOUS EDIT
; UPD ID= 394, SNARK:<5.MONITOR>MEXEC.MAC.3, 1-Apr-80 15:44:01 by HALL
;MAKE JB0TT AND USGMUP BE PART OF RSVAR PSECT
; UPD ID= 374, SNARK:<5.MONITOR>MEXEC.MAC.2, 26-Mar-80 13:36:09 by ENGEL
;STOP EDDT SYMBOL FROM PRINTING
; UPD ID= 288, SNARK:<4.1.MONITOR>MEXEC.MAC.447, 21-Feb-80 10:58:17 by MURPHY
;NEW FKINT DEFS
; UPD ID= 266, SNARK:<4.1.MONITOR>MEXEC.MAC.446, 15-Feb-80 17:39:58 by MURPHY
;PROPER LENGTH FOR QTIMES TABLE IN GETAB
; UPD ID= 240, SNARK:<4.1.MONITOR>MEXEC.MAC.445, 1-Feb-80 14:40:27 by ENGEL
; UPD ID= 110, SNARK:<4.1.MONITOR>MEXEC.MAC.444, 7-Dec-79 16:30:00 by SCHMITT
;TCO 4.1.1051 - CALC. MONITR UPTIME IN SEC AND GIVE TO USAGE JSYS FOR RESTART
; UPD ID= 106, SNARK:<4.1.MONITOR>MEXEC.MAC.443, 7-Dec-79 09:34:57 by R.ACE
;TCO 4.2591 - SECTION-0 PAGE TABLE SHARE COUNT PROBLEM FROM SSAVE
;ADD ERJMP AFTER SOUT IN LITERAL AFTER SSAVB4
; UPD ID= 91, SNARK:<4.1.MONITOR>MEXEC.MAC.442, 5-Dec-79 09:13:00 by OSMAN
;tco 4.1.1044 - Make EXEC command in mini-exec do implicit RESET
;<4.1.MONITOR>MEXEC.MAC.441, 16-Nov-79 13:47:41, EDIT BY MILLER
;PREVIOUS CHANGES UNDER TCO 4.1.1021
;<4.1.MONITOR>MEXEC.MAC.440, 16-Nov-79 13:00:38, EDIT BY MILLER
;ADD TTFSMS BUGINF
;<4.1.MONITOR>MEXEC.MAC.439, 16-Nov-79 11:46:24, EDIT BY MILLER
;CHANGE ALLMSG TO TIME-OUT TTMSG
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
;OR COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1976, 1984.
;ALL RIGHTS RESERVED.
SEARCH MONSYM,PROLOG,SERCOD,ACTSYM
TTITLE MEXEC
EXTN <BRDTIM,DDMPF,MOSULE,HNGU0F,HNGU1F,BUGTL>
IFNDEF FTKLIPA,<FTKLIPA==-1> ;Default is include KLIPA support code
IFNDEF FTMSCP,<FTMSCP==0> ;Default is no MSCP
IFN <FTKLIPA!FTMSCP>,<EXTERN SC.RAP,SCSLGO>
IFE FTNSPSRV,<EXTERN LLMRSJ,LLMINI> ;~6.0 Defined in LLMOP
EXTERN FSPINI
;SWAPPABLE MONITOR ROUTINES, JSYS'S, ETC. - D. MURPHY
;AC DEFINITIONS USED HEREIN
DEFAC (FX,Q3) ;FORK INDEX
;NOTE: THE NEXT TWO LOCATIONS MUST BE TOGETHER. GETAB REQUIRES IT
RSI LOGDES,LOGTTY ;DESIGNATOR FOR LOG MSGS - DEF IN PARAMS
RSI JB0TT,0 ;DESIG FOR JOB 0 AND ERR MSGS
RSI SAVTRE,0 ;DEFAULT IS NOT TO SAVE TREES ON BUGXXX OUTPUT
MICHN==:1B34+1B35 ;CHANNELS THAT MONITOR ENABLES
EXWTIM==:^D120 ;NUMBER MINUTES BETWEEN AUTO EXPUNGES
SWAPCD
;LINKAGE TO MDDT
MDDT=:<MSEC1,,LMDDT> ;SO MDDT$G ALWAYS GOES TO KNOWN SECTION
LMDDT:: XJRST MDDTP ;BE SURE TO CHANGE SECTIONS
MDDTP:: SYMSEC,,MDDTX ;IN SYMBOL SECTION
;REGULAR SUBSYSTEM NAMES FOR INCLUSION IN SNAMES TABLE AT STARTUP
SBSNMS: SIXBIT /EXEC/
SIXBIT /(PRIV)/
NSBSNM==.-SBSNMS
;TABLE DEFINES SPECIAL PURPOSE FOR FIRST FEW JOBS
SPECJT: MSEC1,,RUNDD ;JOB 0 IS ALWAYS DISK CHECKER, ETC.
NSPECJ==.-SPECJT ;NUMBER OF SPECIAL JOBS
RESCD
;CODE TO INITIALIZE JOB ON FIRST STARTUP. ALSO INVOKES SYSTEM
;INITIALIZATION IF FIRST JOB AFTER SYSTEM STARTED FROM SCRATCH
;SYSIFG IS 0 WHEN SYSTEM IS JUST STARTING
EXEC0:: MOVX 1,LOGIOB ;SAY JOB CREATION IN PROGRESS
IORM 1,JOBBIT
SETZM FPC
MOVX 1,USRCTX ;SIMULATE CALL FROM USER
MOVEM 1,FFL
MCENTR
SKIPE SYSIFG ;NEW SYSTEM?
JRST GOTSWM ;NO
MOVEI T1,MFRKWD ;GET SPECIAL PRIORITY FOR MONITOR FORKS
MOVEM T1,JOBSKD ;AND SET THIS JOB AS SUCH
CALL FSIINI ;GO MOUNT THE PUBLIC STRUCTURE
CALL SWPINI ;SWAPPER CAN NOW BE INITIALIZED
;IT MUST BE CALLED AFTER NSSUN AND
; THE SDB FOR PS ARE SET UP BY FSIINI
MOVEI T1,PSNUM ;T1/ STRUCTURE NUMBER (PUBLIC STRUCTURE)
MOVEI T2,HOMPGA ;T2/ ADDRESS OF PAGE TO USE FOR BAT BLOCKS
MOVX T3,MI%MSG ;T3/ FLAGS TO TELL OPERATOR, FIX INCONSISTENT
CALL CHKBAT ;AND NOW THE BAT BLOCKS CAN BE CHECKED
; AND THE OVERFLOW SWAPPING ADDRESSES
; IN THE BAT BLOCKS PROCESSED
GETSWM::
; IFN CFSCOD,<
CALL CFSCSC ;First, create CFS data section
; >
SETOM SWPMLF ; INIT COUNT OF LOCKERS OF SWP MON
SKIPN EDDTF ;KEEP EDDT?
CALL ULKINI ;NO, UNLOCK IT
SKIPE SMLKF ;KEEP SWPMON LOCKED?
CALL SWPMLK ;YES, RE-LOCK IT
CALL MOVNRC ;MAKE SWPMON (NRCOD) BE IN SEC 1 ONLY
CALL RESLCK ;LOCK DOWN SOME RESIDENT FREE SPACE
SKIPE VSMFLG ;SWAP MONITOR NEED TO BE FORCED OUT TO DISK?
JRST [ SETOM SKEDFC ;YES, FORCE IT ALL TO HAPPEN
MOVEI T1,1000 ;1 SECOND OF SLEEP TIME
DISMS ;SHOULD BE LONG ENOUGH FOR THE SWAPABLE
;MONITOR TO GET OUT, WITH OUT ANY PROBLEMS.
SETZM VSMFLG ;STOP FORCING DATA VERIFICATION
SETZM SKEDFC ;MAKE SURE WE DONT SPEND EXTRA TIME SWAPPING, TOO
JRST .+1] ;BACK TO THE MAIL LINE CODE
;AT THIS POINT THE SWAPPABLE MONITOR HAS BEEN LOADED. IF THE MONITOR WAS
;STARTED AT 144, IT HAS ALSO BEEN SWAPPED OUT TO THE DISK.
; IF IT IS DESIRABLE TO PATCH THE SWAPPABLE MONITOR A BREAKPOINT CAN
; BE PUT HERE. NO PART OF THE SWAPPABLE MONITOR WILL HAVE BEEN EXECUTED YET.
;INITIALIZE THE FORK STRUCTURE FOR THIS JOB. ASSIGN FIRST WORD OF FKPTRS
;AND SYSFK TO THIS FORK. MAKE EACH REMAINING WORD OF FKPTRS POINT TO NEXT
;AVAILABLE SLOT AND FREJFK POINT TO THE FIRST AVAILABLE SLOT
;INITIALIZE REMAINING WORDS OF SYSFK TO -1
GOTSWM: MOVEI 1,FKPTRS ;1/NAME OF FORK STRUCTURE LIST
MOVEI 2,NUFKS ;2/NUMBER OF WORDS IN LIST
CALL ILIST ;INITIALIZE FREE WORDS IN FKPTRS
MOVE 1,0(1) ;POINT TO SECOND FREE SLOT
MOVEM 1,FREJFK ;MAKE FREE LIST START WITH SECOND SLOT
SETZM FKPTRS ;TAKE FIRST SLOT FO THIS FORK
MOVE 1,FORKX ;GET SYSTEM-WIDE INDEX FOR THIS FORK
HRRZM 1,SYSFK ;STORE IN JOB STORAGE AREA
;Note that this clears all the flag bits
; (defined in FORK) in LH of SYSFK
MOVEI T1,NUFKS-2 ;T1/ NUMBER OF WORDS TO COPY
MOVEI T2,SYSFK+1 ;T2/ STARTING SOURCE WORD
SETOM (T2) ;INITIALIZE IT TO -1
MOVEI T3,1(T2) ;T3/ STARTING DESTINATION WORD
CALL XBLTA ;INITIALIZE BLOCK TO -1 (EXCEPT FIRST WORD)
MOVE T1,[JTBIFR] ; Initialize JTB free bit table
MOVEM T1,JTBFRE ; ..
SETOM FKLOCK ;INIT FORK LOCK FOR THIS JOB
SETZM FLKCNT ;CLEAR NEST COUNT
SETOM FLKOWN ;CLEAR OWNING FORK
;SET UP FOR INTERRUPTS TO BE PROCESSED BY THE MONITOR
;IF AN INTERRUPT OCCURS ON A CHANNEL WHOSE BIT IS SET IN MONCHN,
;THE MONITOR WILL GO TO EXECI
;CHANNELS 34 AND 35 ARE ACTIVATED HERE, AND CTRL/P IS ASSIGNED
;TO THEM IN THE MINI-EXEC
SETOM TTJTIW
MOVE 1,[XWD MSEC1,EXECI] ;GO TO EXECI ON INTERRUPT
CALL MONBKX
MOVE T1,FORKN ;GET RELATIVE FORK NUMBER
CALL SETVGN ;AND RESTORE VIRGINITY
JRST JBI0 ;CONTINUE IN SWAPPABLE CODE
;JOB INITIALIZATION...
;SYSIFG IS 0 IF SYSTEM IS BEING STARTED
RSI SPJCAP,<SC%CTC!SC%GTB!SC%LOG!SC%SCT!SC%SUP!SC%WHL!SC%OPR!SC%CNF!SC%MNT!SC%IPC!SC%ENQ!SC%NWZ!SC%NAS!SC%DNA!SC%ANA> ;SPECIAL JOB CAPS
SWAPCD
JBI0: CALL JBFINI ;INIT FILE SYS FOR THIS JOB
SKIPE SYSIFG ;SYSTEM INITIALIZED?
JRST SYSINE ;YES
;SYSTEM IS BEING STARTED. DO ONCE-ONLY INITIALIZATION
MOVE T1,SPJCAP ;GET SPECIAL JOB CAPS
MOVEM T1,CAPENB ;ENABLE ALL CAPABILITIES FOR INITIALIZATION
MOVEM T1,CAPMSK ;HERE TOO
;*****TEMP*****
EXTERN SWFREE,SWOPTL,SWFREL
MOVE T1,[SWFREE,,SWFREE+1]
SETZM SWFREE ;ZERO THE FREE POOL
BLT T1,SWFREE+SWFREL-1 ;...
MOVEI T1,SWFREE ;GET ADR OF FREE POOL
HRLOM T1,SWPFRE ;INITIALIZE POINTER TO FREE BLOCK
MOVEI T1,SWFREL ;GET LENGTH OF FREE AREA
HRRZM T1,SWFREE ;MAKE IT ONE LARGE BLOCK
MOVEM T1,SWPFRE+2 ;STORE IN SPACE COUNTER
SETOM SWPFRE+1 ;INITIALIZE LOCK ON FREE STORE
MOVE T1,[XWD SWFREE+SWFREL,SWFREE]
MOVEM T1,SWPFRE+4 ;SET UP TOP AND BOTTOM POINTERS
MOVEI T1,SWOPTL ;GET OPTIMUM LENGTH OF MESSAGES
MOVEM T1,SWPFRE+3 ;SAVE IN HEADER BLOCK
;*****TEMP*****
CALL FSPINI ;Initialize swappable free space
SETOM FGLOCK ;INIT FAST GET LOCK
SETOM SYLNLK ;INIT SYSTEM LOGICAL NAME LOCK
SETOM CRJLCK ;INIT LOCK OF CRJOB DATA BASE
CALL FILINI ;INIT FILE SYSTEM
SETOM GOKLCK ;INIT GETOK LOCK
SETOM TIMLCK ;INIT LOCK ON TIMER Q'S
MOVEI T1,0
DO.
MOVE T2,SBSNMS(T1) ;MOVE REGULAR SUBSYSTEM NAMES TO TABLE
MOVEM T2,@[EP. SNAMES(T1)]
CAIGE T1,NSBSNM-1
AOJA T1,TOP.
ENDDO.
MOVNI 1,NSBSNM ;INIT TABLE POINTER WITH NEG COUNT
MOVEM 1,SNMPT
SETOM SNMLCK ;AND INIT LOCK
MOVE T1,[JOBONT,,JOBONT+1]
SETOM JOBONT ;NO JOBS ARE YET OWNED BY ANYONE
BLT T1,JOBONT+NJOBS-1 ; ..
CALL PIDINI ;INITIALIZE THE IPCF DATA BASE AND FORKS
CALL SLNINI ;INITIALIZE SYSTEM LOGICAL NAMES
SETOM UTLOCK ;INITIALIZE THE UTEST JSYS DATA BASE
CALL GETNAM ;INITIALIZE STRING CONTAINING
; MONITOR VERSION AND NAME
IFN FTNSPSRV,CALL NAMINI ;INITIALIZE NODE NAME TO "TOPS20", IF DECNET
MOVEI T1,TMZONE ;INITIALIZE TIMZON
MOVEM T1,TIMZON
SETOM ACTLCK ;INITIALIZE LOCK ON ACCT WINDOW PAGES
SETOM ACTOFN ;NO OFN FOR ACCT VALIDATION DATA FILE YET
SETOM AVALON ;ALWAYS TURN ON ACCT VALIDATION TILL STATED OTHERWISE
; ..
;JOB INITIALIZATION...
;THIS CODE IS REACHED FOR ALL JOBS, INCLUDING FIRST ONE AFTER SYSTEM
;STARTUP
SYSINE: MOVE T1,JOBNO ;GET OUR LOCAL JOB INDEX
CALL JBGET1 ;ASK CFS FOR A GLOBAL JOB NUMBER
IFNSK. ;IF NO SKIP, WE HAVE NO MORE JOBS LEFT
TMSG <
?No Global Job slots available.
> ;TELL THE USER WHY HE'S GETTING...
JRST FLOGO1 ; LOGGED OUT.
ELSE. ;OTHERWISE
MOVEM T1,GBLJNO ;SAVE THE GLOBAL JOB NUMBER HERE (JSB)
ENDIF. ;
MOVE T1,JOBNO ;INITIALIZE THE PID QUOTA
CALL PIDJBI ; AND SEND QUOTA
CALL ENQJBI ;INITIALIZE ENQ/DEQ QUOTA
MOVE T1,JOBNO ;GET JOB NUMBER
SETZM CRJFLG ;ASSUME NOT A CREATE-JOB STARTUP
HLRZ T2,JOBPT(T1) ;CHECK FOR SPECIAL STARTUP FLAG
CAIE T2,-2 ;FROM CRJOB?
JRST SYSIN1 ;NO. NORMAL STARTUP.
MOVE T2,CRJTTY ;CRJOB. HERE IS THE REQUESTED TTY.
HRLM T2,JOBPT(T1) ;PUT IT IN JOBPT OF NEW JOB.
MOVEM T2,CTRLTT ;AND IN THE JSB
SETOM CRJFLG ;FLAG IN JSB THIS IS A CRJOB STARTUP
SYSIN1: JUMPL T2,SYSIN2 ;JUMP IF JOB IS DETACHED
CALL TTYASN ;ASSIGN CONTROLLING TTY
JRST SYSIN9
SKIPGE CRJFLG ;CRJOB STARTUP??
SETOM CRJTTY ; YES, CRJOB TTY IS NO LONGER SPECIAL
MOVE T2,CTRLTT ;GET TTY NUMBER
CALL TTCKSP ;GO SEE IF SPEED SETTING NEEDED
SYSIN2: MOVE T1,TODCLK
MOVEM T1,CONSTO ;SET CONSOLE TIME ON
CALL LGTAD
MOVEM T1,CTIMON ;SET DATE/TIME CONNECT
SETZM JSSRTM ;Reset session runtime
SETZM JSSCTM ; and session console time
MOVE T1,[OURNAM,,LLSR] ;BLT POINTER TO INITIALIZE NODE NAME
BLT T1,LLSR+WPN-1 ;MAKE JOB'S NODE NAME BE OUR LOCAL NAME
MOVX T1,LOGIOB ;SAY JOB CREATION FINISHED
ANDCAM T1,JOBBIT
;JOBS 0 THROUGH NSPECJ-1 ARE SPECIAL. SPECJT CONTAINS ADDRESS TO WHICH
;TO TRANSFER. FOR NOW, ONLY JOB 0 IS SPECIAL, AND IT GOES TO RUNDD.
;SEE IF THIS IS A SPECIAL JOB
NOTJB0: MOVE 1,JOBNO ;FIRST FEW JOBS ARE SPECIAL,
CAIL 1,NSPECJ ;IS THIS ONE OF THEM?
IFSKP.
MOVEI 2,OPERDN ;YES, GET DIRECTORY NUMBER OF <OPERATOR>
HRRM 2,JOBDIR(1) ;INDICATE LOGGED IN AS <OPERATOR>
STOR 2,JSDIR ;SAVE AS CONNECTED DIRECTORY
SETZRO JSCDF ;NO STRING IN JSB
MOVE 2,STRTAB+PSNUM ;GET SDB ADDRESS OF PRIMARY STRUCTURE
LOAD 2,STRUC,(2) ;GET ITS UNIQUE STRUCTURE CODE
STOR 2,JSUC ;SAVE AS CONNECTED STRUCTURE CODE
MOVE 2,[[3
ASCIZ "OPERATOR"],,USRNAM]
BLT 2,USRNAM+2 ;SET UP DEFAULT USER NAME STRING
MOVE 2,SPECJT(1)
JRST 0(2) ;GO DO THE SPECIAL FUNCTION
ENDIF.
;NOT A SPECIAL JOB. SET UP TERMINAL INFORMATION
MOVE A,CTRLTT ; GET CONTROLLING TERMINAL
JUMPL A,SYSINP ;NO TTY. DON'T INIT TTY PARAMETERS
CALL CHKPTY ;IS IT A PTY?
SKIPA ;NO. INIT TTY PARAMETERS
JRST SYSINP ;YES. DON'T INIT TTY PARAMETERS
MOVEI 1,100
MOVEI 2,3B33 ;SET TO HDX HERE, SO SETTING TO FDX
STPAR ;BELOW WILL FORCE OUT TELNET CONTROL
MOVE 2,NORMTF ;GET TTY TO STANDARD STATE
SFMOD
STPAR ;SET DEVICE PARAMETERS TOO
MOVE B,CTRLTT ;GET CONTROLLING TERMINAL
CALL CHKTVT ;SEE IF A TCP VIRTUAL TERMINAL
JRST SYSINQ ;NEITHER. MUST BE NORMAL.
SYSINO: SKIPA T2,[.TTIDL] ;SOMEKIND OF NET TERMINAL -- IDEAL
SYSINQ: MOVE 2,NORMTY ;Normal kind of terminal
MOVEI T1,.PRIOU
STTYP
MOVE 2,TTICB1
MOVE 3,TTICB2
SFCOC
HRLOI T1,(TL%CRO+TL%COR+TL%SAB+TL%ABS+TL%STA)
MOVE T2,CTRLTT ;Get controlling TTY#
CAMN T2,CTYLNO ;Starting job on CTY?
TXZ T1,TL%ABS ;Yes - so set refuse links
MOVEI T2,-1 ;ALL REMOTE
TLINK ;BREAK LINKS, CLEAR ACCEPT
JFCL
;GO START THE EXEC. IF SYSTEM IS STAND-ALONE, TELL THE USER
SYSINP: SKIPE CRJFLG ;IF CREATED JOB, GO SET IT UP.
JRST STCRJB ; ..
MOVE B,CTRLTT ;GET CONTROLLING TERMINAL
CALL CHKTVT ;ARE WE A TVT?
SKIPA ;NO
CALL TVTMSG ;YES SO OUTPUT THE MESSAGE
MOVE T1,DBUGSW
CAIGE 1,2 ;DEBUG MODE OPERATION?
JRST STEX ;NO, GO START EXEC
TMSG <
[Caution--System is stand-alone]
>
JRST STEX ;WARN USERS FIRST
SYSIN9: SETOM CTRLTT ;INDICATE DETACHED SO LOGOUT WON'T
MOVE T2,JOBNO ; TRY TO WRITE ON THIS TERMINAL
HRROS JOBPT(T2) ;..
SKIPL CRJFLG ;IS THIS JOB BEING CREATED BY CRJOB JSYS?
JRST FLOGO1 ;NO. GO KILL THE JOB
SETOM CRJTTY ;YES, CRJOB TTY IS NO LONGER SPECIAL
MOVEM T1,CRJANS ;YES. SAVE ERROR CODE FROM TTYASN
JRST LOGO ;GO KILL THE JOB
;HERE AT STARTUP OF JOB BY CRJOB JSYS.
STCRJB: MOVE T1,GBLJNO ;GET GLOBAL JOB INDEX FOR CREATOR
HRLM T1,CRJONJ ;TELL CREATOR, IF WE GET THERE.
MOVE Q1,JOBNO ;CARRY AROUND MY JOB NUMBER
MOVE Q2,CRJAC1 ;AND CONTROL FLAGS OF CRJOB AC1
HRRZ T1,CRJONJ ;Get creator's global job number
CALL GL2LCL ;Convert it into a local job index
JRST SCJXX4 ;No such job...give up
HRRM T1,CRJAC1 ;Save the local index for later
HRRZ T1,CRJONJ ;Get the global job number of creator
HRL T1,GBLJNO ;GET JOB NUMBER FOR JOBONT.
TXNE Q2,CJ%OWN ;CREATOR WANTS TO OWN ME?
MOVEM T1,JOBONT(Q1) ;YES. REMEMBER WHO HE IS.
MOVE T1,CRJSLO ;SIGNAL ON LOGOUT?
TXNN Q2,CJ%SLO ; ..
MOVEI T1,0 ;NO. CLEAR THE PID
MOVEM T1,JSLOPD ;SAVE THE PID FOR THE SIGNAL
JN CJ%LOG,Q2,STCJB1 ;JUMP IF WANTS TO LOG IN
HRRZ T1,CRJAC1 ;NO LOGIN, GET CREATOR'S JOB INDEX
HRRZ T1,JOBDIR(T1) ; TO FETCH CREATOR'S LOGIN DIRECTORY
STOR T1,JSDIR ;AND MAKE IT OUR CONNECTED DIRECTORY
MOVE T1,STRTAB+PSNUM ;POINT TO THE PRIMARY SDB
LOAD T1,STRUC,(T1) ; AND FETCH THE PRIMARY STRUCTURE UNIQUE CODE
STOR T1,JSUC ;SET IN JSB, COMPLETING CONNECT TO PRIMARY STR
SETZM CAPENB ;MAKE SURE I HAVE NO CAPS ENABLED
HLLZS CAPMSK ;OR POTENTIAL
MOVE T1,CRJOJC ;GET OWNING JOB'S CAPS
AND T1,CRJCAM ;MASKED, IF ASKED
TXNE Q2,CJ%CAP ;DOES HE WANT TO GIVE ME HIS?
HRRM T1,CAPMSK ;YES, I'LL TAKE THEM, UNTIL LOGIN JSYS
JRST STCJ1A ;DONE WITH LOGIN-ISH STUFF
;HERE IF CJ%LOG IS ON IN CALL. I AM TO TRY TO LOG THIS JOB IN.
STCJB1: HRROI B,CRJUSR ;POINT TO THE USER NAME STRING
MOVX T1,RC%EMO ;EXACT MATCH ONLY
RCUSR ; AND CONVERT TO USER NUMBER
ERJMP SCJXXX ;PASS FAILURE CODE BACK
TXNE T1,RC%NOM!RC%AMB ;FILES ONLY, NO MATCH OR
JRST SCJXX1 ; AMBIGUOUS? FAIL. CAN'T LOG IN.
MOVEM T3,CRJUSR ;STORE THE NUMBER
HRRZ T3,T3 ;CLEAN FOR CAMN LATER
MOVE T4,CRJOJC ;GET CREATOR'S CAPS
HRRZ T1,CRJAC1 ;AND JOB INDEX
HRRZ T1,JOBDIR(T1) ;CREATOR'S LOGIN DIRECTORY
TRNN T4,SC%WHL!SC%OPR ;PRIVILEGED CREATOR?
CAMN T1,T3 ;OR LOGGING IN AS SAME USER?
JRST STCJ1E ;YES. NO NEED FOR PSWD CHECK.
TXZE Q2,<CJ%NPW!CJ%NUD> ;NO, SO REQUIRE PASSWORD, AND LOGIN DATE
JRST [ MOVEI T1,CRJBX1 ;ILLEGAL REQUEST
JRST SCJXXX]
STCJ1E: LOAD T1,CJ%ACT,Q2 ;WHAT KIND OF ACCOUNT DO WE USE?
CAIE T1,.CJUCA ;USE CURRENT ACCOUNT OF CREATOR
CAIN T1,.CJUAA ;OR ARG BLOCK ACCOUNT?
JRST STCJ1C ;YES, IT'S IN THE COMMON STORAGE.
SETZM CRJACT ;USE DEFAULT
;FALL THRU
;CAN FALL IN
STCJ1C: MOVEI T1,0 ;BUILD FLAGS FOR LOGIN JSYS
TXNE Q2,CJ%NPW ;NO PASSWORD NEEDED?
TRO T1,1 ;RIGHT.
TXNE Q2,CJ%NUD ;NO UPDATE LOGIN DATE?
TRO T1,2 ;RIGHT. TELL LOGIN.
HRRM T1,CRJFLG ;STORE FOR IT TO SEE
MOVE T1,CRJUSR ;LET'S DO THE LOGIN NOW.
HRROI T2,CRJPSW ;PASSWORD, IF ANY.
MOVE T3,CRJACT ;AND ACCOUNT
LOGIN ;SEE IF THIS IS ALL VALID.
JRST SCJXXX ;APPARENTLY NOT.
TXNN Q2,CJ%CAP ;test if CAP flag is on
JRST STCJ1A ;no, skip over the rest
MOVE T1,CRJOJC ;get caller's caps back
AND T1,CAPMSK ;AND them with user's available caps
HLL T1,CAPMSK ;copy cap allowed to LH of new jobs caps
MOVEM T1,CAPENB ;save caps enabled
STCJ1A: MOVE T2,CRJCPU ;GET TIME LIMIT FOR THIS JOB
JUMPE T2,SCJBNL ;JUMP IF NO LIMIT
MOVE T1,[.FHJOB,,.TIMRT] ;SET TIME LIMIT FOR JOB
MOVEI T3,.ICMSE ;ON MACHINE-SIZE EXC CHANNEL, SO PANIC
TIMER ;DO IT
JRST SCJXXX ;GIVE BACK FAILURE
SCJBNL: MOVEI T1,.FHSLF ;SET UP TO DO SPJFN
MOVE T2,CRJPJF ;FROM THIS ARGUMENT
TXNE Q2,CJ%FIL ;IS THERE BOTH AN EXEC AND AN INFERIOR?
TXNN Q2,CJ%ETF ; ..
SKIPA ;NO. DO THE SPJFN HERE.
JRST STCJ1D ;YES. ONLY DO THE SPJFN ON THE INFERIOR
TXNE Q2,CJ%SPJ ;REQUESTED TO DO SPJFN?
SPJFN ;YES, DO IT.
STCJ1D: HLLZS CRJFLG ;NO FLAGS FOR A LATER LOGIN
TXNN Q2,CJ%FIL ;WANT TO RUN A FILE?
JRST CJSTEX ;NO. JUST GO GET THE EXEC.
STCJB2: TXNE Q2,CJ%ETF ;WANT A FILE. AN EXEC TOO?
JRST STCJB3 ;YES.
MOVX T1,GJ%OLD!GJ%SHT ;GET THE REQUESTED FILE IN TOP FORK
HRROI T2,CRJFIL ;POINT TO THE TEXT
GTJFN ;GET JFN FOR REQUESTED FILE
JRST SCJXXX ;CAN'T
HRLI T1,.FHSLF ;OK, GET IT INTO THIS FORK.
GET
ERJMP SCJXX4 ;IF GET FAILS, QUIT.
;NOTE: THIS CODE RUNS IN SECTION 0 FOR SOME UNKNOWN REASON. IN
;ORDER FOR THIS CALL TO BLTMU TO WORK CORRECTLY, THIS CODE TEMPORARILY
;ENTERS SECTION 1. IF STRCJB IS MADE TO RUN ENTIRELY IN SECTION 1, THESE
;MACROS SHOULD BE REMOVED.
TSTMS0 ;We had better be in section 1
MOVEI T1,20 ; Length of AC block
XMOVEI T2,CRJFAC ; From there
SETZ T3,
TXNE Q2,CJ%ACS ;AC SET REQUESTED?
CALL BLTMU
MOVEI T1,.FHSLF ;GET THE ENTRY VECTOR
GEVEC ;GET THE ENTRY VECTOR
TLNN T2,777000 ;TOPS10 STYLE?
JRST STCJ2A ;NO. TOPS20 STYLE, IF ANYTHING.
HRRZ T3,CRJEVO ;OLD STYLE. WHERE DOES START POINT?
CAILE T3,1 ;START OR REENTER, I HOPE.
JRST SCJXX3 ;NO. FAIL.
UMOVE T2,120 ;GET JOBSA
TRNE T3,-1 ;OR IF 1,
UMOVE T2,124 ;GET JOBREN
SKIPA
STCJ2A: ADD T2,CRJEVO ;NEW STYLE, ADD OFFSET TO BASE.
HRRZM T2,-1(P) ;WHERE MRETN WILL GO.
HRLI T2,1 ;INDICATE JOB HAS ALREADY SET CRJANS
HLLM T2,CRJFLG ; BY MAKING FLAG POSITIVE
SETOM CRJANS ;SAY WE HAVE SUCCEEDED.
CALL SCJWTA ;WAIT FOR ATTACH, IF WANTED
JRST MRETN ;AND GO TO USER MODE.
;HERE IF WANT BOTH A FILE AND AN EXEC.
STCJB3: MOVX T1,GJ%OLD!GJ%SHT ;GET A JFN FOR THE FILE.
HRROI T2,CRJFIL ;WITH SUPPLIED NAME
GTJFN
JRST SCJXXX ;CAN'T FIND THE FILE.
PUSH P,T1 ;SAVE JFN A MOMENT
MOVX T1,CR%CAP ;CREATE THE NEW FORK, MY CAPS.
TXNE Q2,CJ%ACS ;WANT SOME AC'S LOADED?
TXO T1,CR%ACS ;YES, HAVE CFORK LOAD THEM.
MOVEI T2,CRJFAC ;HERE ARE THE AC'S
CFORK ;MAKE ME A FORK! (YOU'RE A FORK)
JRST SCJXX2 ;CAN'T DO IT.
EXCH T1,0(P) ;GET BACK JFN, SAVE FHANDLE
HRL A,0(P) ;SET UP FOR THE GET
GET
ERJMP SCJXX2 ;CAN'T GET THE FILE
MOVE T1,0(P) ;HANDLE OF INFERIOR
MOVE T2,CRJPJF ;PRIMARY I/O FOR IT
TXNE Q2,CJ%SPJ ;IF REQUESTED,
SPJFN ;SET IT.
POP P,T1 ;INFERIOR FORK HANDLE.
HRLZS T1 ;FORK,,0
HRR T1,CRJEVO ;WHERE TO START IT.
CJSTEX: CALL SCJPRA ;SET UP PRARG FOR EXEC
CALL STEX ;GET EXEC
HRLI T2,1 ;INDICATE JOB HAS ALREADY SET CRJANS
HLLM T2,CRJFLG ; BY MAKING FLAG POSITIVE
SETOM CRJANS ;DONE WITH THE JSYS
CALL SCJWTA ;WAIT FOR ATTACH, IF REQUESTED
JRST GEX1 ;AND START THE EXEC.
;CALL THIS ROUTINE BEFORE GOING TO MRETN FROM CRJOB PATHS. IT WILL
;WAIT FOR JOB TO BECOME ATTACHED, IF THAT'S REQUESTED BY CALLER.
SCJWTA: TXNN Q2,CJ%WTA ;WANT TO WAIT?
RET ;NO.
MOVE T1,JOBNO ;YES. GET MY JOB NUMBER
MOVEI T1,JOBPT(T1) ;AND JOBPT SLOT FOR THIS JOB
CALL DISGE ;WAIT FOR LH TO BECOME POSITIVE
RET ;NOW ATTACHED. RETURN.
SCJXX3: MOVEI T1,SFRVX1 ;BAD ENTRY VECTOR OFFSET
JRST SCJXXX ;RETURN THAT ERROR
SCJXX2: POP P,0(P) ;ADJUST STACK POINTER
SCJXX4: HRRZ T1,LSTERR ;AND RETURN THIS FORK'S LAST ERROR
JRST SCJXXX ; TO CREATOR
SCJXX1: MOVEI T1,CRJBX5 ;UNKNOWN NAME FOR LOGIN
SCJXXX: SKIPGE CRJFLG ;IS THIS JOB BEING CREATED
HRRZM T1,CRJANS ;YES. SET RH NON-ZERO.
MOVE T1,JOBNO ;MAKE SURE I'M NOT OWNED, SO
SETOM JOBONT(T1) ;THIS LOGOUT CAN GO THROUGH
JRST LOGO ;AND KILL OFF THIS STARTED JOB.
;ROUTINE TO SET UP PRARG FOR EXEC TO READ IN NEW JOB
NCJPRA==3 ;NUMBER OF ARGUMENT ITEMS
LCJPRA==6 ;LENGTH OF BLOCK TO SET
SCJPRA: TRVAR <<SCJPRB,10>> ;SPACE TO BUILD PRARG BLOCK
PUSH P,T1 ;PRESERVE FORKX,,SFRKV OFFSET
MOVEI T1,NCJPRA ;NUMBER OF ARGUMENTS
MOVEM T1,SCJPRB ;INTO THE BLOCK
MOVEI T1,SCJPRB ;POINT TO BLOCK WITH PUSH POINTER
PUSH T1,[1B0+3B6+2B12+CR%PRA] ;I AM A CRJOB PRARG
PUSH T1,[1B0+4] ;WORD 4 IS ANOTHER DATUM
PUSH T1,[1B0+5] ;WORD 5 IS ANOTHER DATUM
MOVE T2,CRJEXF ;FLAGS FOR EXEC IS ONE DATUM
TXNE Q2,CJ%FIL ;IF THERE IS A PROGRAM
TXO T2,1B1 ;TURN ON "THERE'S A FORK" BIT
PUSH T1,T2 ;FLAGS TO ARG BLOCK
POP P,T2 ;RESTORE FORKX,, ENT-VEC-OFFSET
TXNE Q2,CJ%FIL ;IF THERE IS A PROGRAM
PUSH T1,T2 ;PUT IT IN BLOCK
MOVE T1,[.PRAST,,.FHSLF] ; SET MY OWN PRARG BLOCK
MOVEI T2,SCJPRB ;HERE'S THE BLOCK TO SET
MOVEI T3,LCJPRA ;HERE'S ITS LENGTH
PRARG ;SET IT
ERJMP SCJXX4 ;CATCH TRAP IF FAILED
RET ;SUCCESS.
SUBTTL Job 0 Initialization (RUNDD)
;SYSTEM INITIALIZATION. RUN ONCE ONLY BY JOB 0.
SWAPCD
RUNDD:: MOVE T1,SPJCAP ;GET SPECIAL JOB CAPS
MOVEM T1,CAPENB ;ENABLE ALL CAPABILITIES FOR INITIALIZATION
MOVEM T1,CAPMSK ;HERE TOO
MOVEI T1,RUNDD3 ;GO TO RUNDD3 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
MOVE T1,[MSEC1,,JB0INT] ;XFR TO JB0INT ON ERROR
CALL MONBKX
MOVX T1,SF%BGS ;Make all messages type on CTY
IORM T1,FACTSW
MOVE T1,CTYLNO ;GET CTY LINE NUMBER
MOVEI T1,.TTDES(T1) ;CONVERT TO 400000+N
MOVEM T1,JB0TT ;CONTROLLING TERMINAL FOR JOB 0
HRRM T1,PRIMRY ;AND PRIMARY OUTPUT FOR US
CALL ASCINI ;Initialize accounting shift change stuff
CALL RESLCK ;BE SURE ADEQUATE RES FREE SPACE
CALL SERINI ;START SYSERR LOGGING
SKIPN PROFLG ;WANT PRIMARY PROTOCOL?
JRST RUNDI7 ;NO. SKIP ALL PRIMARY STUFF
MOVEI A,.PRIOU ;YES. FIRST WAIT FOR CTY TO STOP
DOBE ;"
CALL TTSPIN ;INITIALIZE TERMINAL SPEEDS TO NULL
CALL PROINI ;TURN ON PRIMARY PROTOCOL
CALL DTRMDS ;TELL -11 NOT TO ANSWER DATA SETS
;TRY TO GET TIME AND DATE FROM THE 11. DTE SERVICE SENDS THE REQUEST TO
;THE 11 AND STORES ITS ANSWER IN TAD11. IF THE 11 DOES NOT KNOW, IT
;RETURNS -1. IN THIS CASE, ASK THE OPERATOR FOR THE TIME. IF THE 11 HAS
;IT, DON'T ASK THE OPERATOR
SKIPE SMFLAG ;IF SM10 THEN WE ALREADY HAVE TIME AND DATE CORRECT
JRST RUNDD3
SETZM TAD11 ;ZERO TIME CELL
CALL RQTAD1 ;REQUEST TIME/DATE FROM 11
JFCL ;THIS FAILURE CAN'T OCCUR
SKIPN TAD11 ;HAS 11 SENT TIME/DATE YET?
JRST .-1 ;NO. WAIT UNTIL IT DOES
MOVE B,TAD11 ;GET TIME SENT FROM -11
SETOM TAD11 ;YES. RESET TO INDICATE NOT SET BY 11
CAMN B,[-1] ;DOES THE -11 HAVE IT?
JRST RUNDI7 ;NO
DMOVE C,TAD11+1 ;YES. GET REST OF IDCNV ARGS
IDCNV ;CONVERT TO INTERNAL
JRST RUNDI7 ;FAILED. GET FROM OPERATOR THEN
MOVEM B,CRSTAD ;LET IT FIND IT LATER
;..
;RUNDD...
;SET SYSTEM TIME AND DATE IF THE 11 PROVIDED IT
;..
RUNDI7: MOVEI 1,101
DOBE
SKIPN 1,CRSTAD ;DO WE HAVE A SAVED TIME FROM CRASH?
JRST [ MOVX A,SF%MST ;NO. SAY IS A MANUAL START
IORM A,FACTSW ;""
JRST RUNDD3]
STAD ;YES, SET IT
JFCL
SETZM CRSTAD
;Initialize checkpoint interval
RUNDD3: MOVEI T1,RUNDI4 ;GO TO RUNDI4 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
MOVE T1,[^D<10*60000>] ;SET DEFALUT CHECKPOINT INTERVAL
MOVEM T1,CKPINV ;...
IFN FTKLIPA,<
CALL PPDINX ;CRANK UP PORT/SCA/SYSAPS
>
;Now that KLIPA is running, or has failed to start, check if we
;need to load the microcode
CALL IPACHK ;Check on the KLIPA
IFNSK. ;If +1, we did reload the KLIPA
MOVEI T1,^D2000 ;Wait here for the driver to see it
DISMS ;""
ENDIF.
; IFN CFSCOD,<
AOS CFSSKC ;Check on CI utility now
; >
;Default the CTY to be an LA120 if we are condensing BUGxxx output
SKIPN SAVTRE ;SAVING TREES?
IFSKP.
MOVEI T1,.PRIOU ;YES, DEFAULT THE CTY
MOVEI T2,.TT120 ; TO BE AN LA120
STTYP ;SET THE CTY'S TTY TYPE
ERJMP .+1
ENDIF.
;RUN SETSPD TO SET LINE SPEEDS, SYSTEM LOGICAL NAMES, OTHER SYSTEM
;PARAMETERS
MOVX T1,GJ%OLD!GJ%SHT!GJ%PHY ;YES. SET LINE SPEEDS
HRROI T2,SETSPD ;GET POINTER TO "SYSTEM:X-SETSPD.EXE"
SETZ T3, ;3/OFFSET 0 IN ENTRY VECTOR
SETZM T4 ;DO NOT RECORD FORK NUMBER
CALL RUNDII ;GO RUN IT
JRST [ TMSG <
%%No SETSPD.
>
MOVEI T1,.PRIOU ;WAIT UNTIL THE TERMINAL
DOBE ; STOPS SO THE NEXT MESSAGE IS OK
JRST .+1] ;SAY IT FAILED
CALL GETNAM ;DO AGAIN,SINCE SYSTEM: MAY BE REDEFINED
; IFN CFSCOD,< ;If CFS...
CALL FILRST ;reset all file accesses now
CALL CFSJYN ;Join the network now
IFN <FTKLIPA>,<
MOVX T1,1B1 ;Make a fork to prevent hanging
CFORK ;""
IFSKP. ;If it made it...
DO.
MOVE T2,[MSEC1,,TERUN] ;Where it is to run
MSFRK ;Do it
ERJMP ENDLP. ;If failed, go on
MOVEM T1,TEFORK ;Save fork handle for later
ENDDO.
ENDIF. ;Now we can't get hung by SCA buffer deferral
> ;IFN <FTKLPA>
MOVEI T1,^D2000 ;A small wait time
DISMS ;Wait here for CFS join to complete
CALL CFGTJB ;Initialize CFS Global Job numbers
CALL MNTPS ;And mount PS: correctly
; > ;IFN CFSCOD
;IF DBUGSW IS 0 OR 1, TELL ALL USERS THAT SYSTEM IS RESTARTING
RUNDD6: MOVE 1,DBUGSW
SOJG T1,RUNDI4 ;If .GE. 2, don't send notification
SETO 1,
HRROI 2,[ASCIZ /
System restarting, wait.../]
TTMSG
ERJMP .+1
;..
;RUNDD...
;GET DATE AND TIME FROM OPERATOR UNLESS 11 SENT IT EARLIER
;..
RUNDI4: MOVEI T1,RUNDI1 ;GO TO RUNDI1 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
; IFN CFSCOD,< ;Only if doing CFS code
CALL CFTADC ;See if CFS has a better time
IFSKP. ;If so
STAD ;Set it
ANSKP. ;And if it got set
HRROI T1,[ASCIZ /
Date and time is: /]
PSOUT ;Tell the operator
MOVEI T1,.PRIOU
SETOM T2 ;Use time we just set
MOVX 3,1B1+1B2+1B4+1B5+1B10+1B11+1B17
ODTIM ;TYPE IT IN VERBOSE FORMAT
HRROI T1,[ASCIZ /
/]
PSOUT ;Make it pretty
CALL DTTIME ;If a KL, tell the FE
JRST RUNDI1 ;And go on
ENDIF.
; > ;IFN CFSCOD
CALL LGTAD ;DOES SYSTEM HAVE TIME AND DATE?
CAME A,[-1]
JRST RUNDI1 ;YES
MOVE T1,DBUGSW ;Get mode of system
CAIE T1,3 ;Defaulting time/date?
JRST RUNDI3 ;No. Ask then
MOVE T1,SYSTAD ;Get monitor creation time
STAD ;Set system time with it
NOP
JRST RUNDI1 ;And go on
RUNDI3: TMSG <
Enter current date and time: >
RUNDI2: CALL RDDGTD ;GET TAD INTO 2
PUSH P,2 ;SAVE TAD JUST ENTERED
TMSG <
You have entered >
MOVEI 1,.PRIOU
MOVE 2,0(P)
MOVX 3,1B1+1B2+1B4+1B5+1B10+1B11+1B17
ODTIM ;TYPE IT IN VERBOSE FORMAT
MOVE 2,0(P)
CAMGE 2,SYSTAD ;IS IT GREATER THAN SYSTEM LOAD TAD?
JRST [ MOVEI 1,.PRIIN ;CLEAR TYPE AHEAD
CFIBF
MOVEI 1,.PRIOU
DOBE ;WAIT FOR TYPE OUT TO STOP
TMSG <,
that cannot be correct.
Please try again in form MMM-DD-YY HHMM >
JRST RUNDI2]
TMSG <,
is this correct (Y,N) >
CALL YESNO ;GET VERIFICATION
JUMPE A,RUNDI3 ;IF 'NO', TRY AGAIN
POP P,1 ;CONFIRMED, RECOVER IT
STAD ;SET IT
JFCL
; IFN CFSCOD,<
CALL BRDTIM ;If CFS stuff around, reconcile any differences
; >
; ..
;RUNDD...
;DECIDE WHETHER TO RUN CHECKD OR NOT. IF CHKBT FOUND ERRORS, FACTSW HAS
;SF%BTE SET; RUN CHECKDTO DO A BIT TABLE CONSISTENCY CHECK. IF BIT
;TABLE FILE DOESN'T EXIST, MS%ASG IS SET IN SDB. DON'T RUN CHECKD.
;(OPERATOR WILL HAVE TO RUN IT WITH THE REBUILD FUNCTION). IF DOING
;RECONSTRUCTION OF ROOT-DIRECTORY OR REBUILD OF BIT TABLE, STARTF HAS
;MI%BTB SET; RUN CHECKD TO DO A REBUILD OF THE BIT TABLE. IF DOING
;A REFRESH OF THE FILE SYSTEM, DON'T TRY TO RUN CHECKD. IF NONE OF
;THE ABOVE, ASK THE OPERATOR UNLESS AUTO RELOADING. IN ALL CASES,
;ONLY PS IS MOUNTED AT THIS POINT, SO CHECKD IS ONLY RUN ON PS.
;..
RUNDI1: MOVEI T1,RUNDD1 ;GO TO RUNDD1 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
CALL LOGSST ;LOG RESTART IN SYSERR FILE
SKIPN AVALON ;RUNNING ACCOUNT VALIDATION?
JRST RUNDI5 ;NO, PROCEED
CALL ENACT ;INITIALIZE THINGS FOR ACCT VALIDATION
JRST [ TMSG <
<SYSTEM>ACCOUNTS-TABLE.BIN not found - Account validation is disabled
>
SETZM AVALON ;TURN OFF VALIDATION
JRST .+1] ;AND PROCEED
RUNDI5: MOVX T4,MI%BTB ;IF REBUILDING THE BIT TABLE (BIT IS
TDNE T4,STARTF ; SET BY FILINI)
JRST RUNDC2 ;ALWAYS RUN CHECKD IN REBUILD MODE
MOVE 2,DBUGSW ;IF DEBUGGING,
CAIL T2,2 ;If debugging...
JRST RUNDD2 ;DON'T RUN CHECKD
MOVX T4,MI%RFS ;IF REFRESHING (BIT IS SET
TDNE T4,STARTF ; BY FSIINI)
JRST RUNDD2 ;DON'T RUN CHECKD (IT ISN'T THERE)
MOVE T2,STRTAB+PSNUM ;POINT TO SDB FOR PS
MOVE T2,SDBSTS(T2) ;GET STATUS BITS FOR PS
MOVE T1,FACTSW
TXNE T1,SF%BTE ;BIT TABLE ERRORS?
TXNE T2,MS%ASG ;YES. ARE DISK ASSIGNMENTS PROHIBITED?
SKIPA ;YES. DON'T RUN CHECKD
JRST RUNDC1 ;BIT TABLE ERRORS BUT BT FILE EXISTS. RUN CHECKD
TXNN A,SF%MST ;MANUAL STARTUP?
JRST RUNDD2 ;NO. NO QUESTIONS AND NO CHECKD
;..
;CHECKD NOT REQUIRED. SEE IF OPERATOR WANTS IT
;..
TMSG <Run CHECKD? >
CALL YESNO
JUMPE A,RUNDD2 ;JUMP IF NO
RUNDC1: SKIPA T1,[-1,,[ASCIZ/[Checking file consistency]
/]]
RUNDC2: HRROI T1,[ASCIZ/[Rebuilding bit table]
/]
PSOUT
MOVSI 1,(GJ%OLD!GJ%PHY!GJ%SHT)
HRROI 2,[ASCIZ /SYSTEM:CHECKD.EXE/]
MOVX T3,SF%CDR ;SAY CHECKD NOW RUNNING
IORM T3,FACTSW ;DO IT
SETZ T3, ;NORMAL ENTRY POINT
MOVX T4,MI%BTB
TDNE T4,STARTF ;REBUILDING BIT TABLE?
MOVEI T3,3 ;YES. START AT SPECIAL ENTRY POINT
SETZM T4 ;DO NOT RECORD FORK NUMBER
CALL RUNDII ;GO START IT
JRST [ MOVX T1,SF%CDR ;NOT RUNNING
ANDCAM T1,FACTSW
JRST RUNDD1] ;FAILED
SETZM STARTF ;INDICATE STARTUP IS COMPLETE
IFN SKEDSW,<
SETZM NNSBE ;RESTART COUNTING NOSKED P-FAULTS
> ;END IFN SKEDSW
MOVX T1,SF%CDR ;SAY CHECKD NOT RUNNING ANYMORE
ANDCAM T1,FACTSW ;""
JRST RUNDD2 ;PROCEED
;FAILED TO FIND CHECKD WHEN RUNNING IT WAS REQUIRED BY THE SYSTEM
;OR REQUESTED BY THE OPERATOR. PRETEND THAT IT RAN AND FOUND
;ERRORS. IF IT IS RUN LATER AND FINDS PS TO BE OK, IT WILL CLEAR
;SF%CDE.
;IT ALSO CAUSES THE 'FILE STRUCTURE NEEDS REPAIR' MESSAGE BELOW
;AND PREVENTS SYSJOB FROM DOING ITS USUAL THING
RUNDD1: MOVEI T1,RUNDD2 ;GO TO RUNDD2 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
TMSG <
No CHECKD
>
SETZM STARTF ;INDICATE STARTUP COMPLETED
IFN SKEDSW,<
SETZM NNSBE ;RESTART COUNTING NOSKED P-FAULTS
> ;END IFN SKEDSW
MOVX T4,SF%CDE ;PRETEND CHECKD FOUND ERRORS
IORM T4,FACTSW
;..
;RUNDD...
;IF DEBUGGING, TELL ALL USERS. IF CHECKD FOUND ERRORS, TELL ALL USERS
;THEN PROCEED AS USUAL
;..
RUNDD2: CALL SRVCFS ;NOTIFY MSCP SERVER THAT INIT IS COMPLETE
SETONE SF%DPR,FACTSW ;Now enable disk preallocation
MOVEI 1,RUNDD7 ;GO TO RUNDD7 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
MOVEI 1,101
DOBE ;WAIT FOR ANY CHECKD OUTPUT
MOVE 1,DBUGSW
CAIL 1,2 ;DEBUG MODE OPERATION?
JRST [ SETO 1, ;YES, DIFFERENT MESSAGE
HRROI 2,[ASCIZ /
[System is stand-alone]
/]
TTMSG
ERNOP. ;IN CASE OF REFUSALS
JRST RUNDE1]
MOVX 1,SF%CDE
TDNE 1,FACTSW ;DID CHECKD FIND DISK ERRORS?
JRST [ HRROI 2,[ASCIZ /
[System not in operation - file structure needs repair]
/]
SETO 1,
TTMSG
ERNOP. ;IN CASE OF REFUSALS
JRST RUNDE1]
;Create a fork to be the old "job 0" fork -- the one that runs at CHKR.
;Continue the current fork at DDMP.
RUNDE1: SKIPE T1,TEFORK ;Is there a temp fork laying around?
KFORK ;Yes. Get rid of it now
MOVX T1,1B1 ;Create a fork
CFORK ;Do it
RUNDDX: BUG.(HLT,DDXFRK,MEXEC,SOFT,<Cannot create CHKR fork>,,<>)
XMOVEI T2,RUNDEC ;Where to proceed
MSFRK ;Continue things below
ERJMP RUNDDX
;Continue the current fork at DDMP0.
MOVE T1,[MSEC1,,DDMPER] ;GO TO DDMPER ON ERRORS
CALL MONBKX
TMSG <
Running DDMP
>
MOVE T1,FORKX ;GET FORK NUMBER
MOVEM T1,DDMFRK ;RECORD IT
JRST DDMP0 ;DO DDMP HERE
;System initialization fork resumes here
RUNDEC: MOVX T1,USRCTX ;Start with user context set
MOVEM T1,FFL
MCENTR ;Start a new process
MOVE T1,FORKX ;GET FORK NUMBER
MOVEM T1,JB0FRK ;RECORD IT
MOVE T1,[MSEC1,,JB0INT] ;Where to go on error
CALL MONBKX
MOVE 1,JB0TT ;JOB 0 TTY
CAIE 1,377777 ;REAL TTY?
JRST RUNDD4 ;YES
;INITIALIZE SYSERR LOGGING
MOVEI 1,ERRPT ;GET NAME OF SYSTEM ERROR FILE
CALL PUTNAM ;ADD STRUCTURE NAME
MOVSI 1,(GJ%FOU!GJ%PHY!GJ%SHT) ;NONE, SO OPEN FILE FOR MESSAGES
HRROI 2,ERRPT ;GET NAME OF SYSTEM ERROR FILE
GTJFN
BUG.(CHK,NOSERF,MEXEC,HARD,<CANNOT GTJFN ERROR REPORT FILE>,,<
Cause: This BUG is not documented yet.
Action:
>)
MOVE 2,[44B5+1B20]
OPENF
BUG.(CHK,SERFOF,MEXEC,HARD,<CANNOT OPENF ERROR REPORT FILE>,,<
Cause: This BUG is not documented yet.
Action:
>)
RUNDD4: HRRM 1,PRIMRY ;USE IT FOR OUTPUT
;START ACCOUNTING
CALL USGINI ;START ACCOUNTING
;..
;RUN SETSPD AGAIN. THIS TIME, START IT AT A SPECIAL PLACE TO MAKE
;IT COPY THE DUMP FILE.
;..
MOVX T1,SF%CDE ;DON'T CREATE DUMP.CPY IF THE BIT
TDNE T1,FACTSW ; TABLE IS BAD
JRST RUNDD7 ;CHECKD FOUND ERRORS IN THE BT
MOVX T1,GJ%OLD!GJ%PHY!GJ%SHT
HRROI T2,SETSPD ;GET POINTER TO "SYSTEM:X-SETSPD.EXE"
MOVEI T3,3 ;3/ OFFSET 3 IN ENTRY VECTOR
SETZM T4 ;DO NOT RECORD FORK NUMBER
CALL RUNDII ;GO RUN IT
JFCL ;IGNORE FAILURE
SKIPL SPRCNT ;IF SPRCNT<0 THEN SETSPD DID NOT RE-INIT IT
IFSKP. ;SO.. TELL WORLD
TMSG <
%SPEAR entry counter was not re-initialized, resynching to 0.
>
SETZM SPRCNT ;AND RESET TO 0 TO START LOGGING
ENDIF.
AOS SECHKF ;FORCE STUFF GOING ON THE SYSERR QUEUE
;DO NETWORK-RELATED FUNCTIONS
RUNDD7: MOVEI T1,RUNDD8 ;GO TO RUNDD8 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
IFE FTNSPSRV,<
CALL D36INI ;INIT DECNET
JFCL ;IGNORE (SPURIOUS) NON-SKIP RETURN
CALL LLMINI ;INITIALIZE Ethernet LLMOP Protocol Servers
CALL CTHINI ;INITIALIZE FOR CTERM HOST
CALL OBJINI ;INITIALIZE OBJECT TYPE TABLE FOR DECNET
>;END IFE NSPSRV
CALL LATINI ;INITIALIZE LAT HOST
CALL MNTINI ;INITIALIZE MULTINET
CALL INTBEG ;INITIALIZE THE INTERNET FORK
IFN FTNSPSRV,<
CALL ATSINI ;INITIALIZE APPLICATIONS TERMINAL SERVICE
CALL NSPINI ;INIT DECNET FORK AND DATA BASE
>;END IFE NSPSRV
RUNDD8: MOVEI T1,RUNDD5 ;GO TO RUNDD5 IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
AOS SYSIFG ;INDICATE NO LONGER IN STARTUP
; (NEXT JOB WON'T GO THROUGH RUNDD)
CALL DONSJ ;START NEXT SPECIAL JOB
;..
;CREATE FORK UNDER JOB 0 AND RUN SYSJOB IN IT. SYSJOB READS A COMMAND
;FILE, WHOSE NAME IS DETERMINED BY THE SETTING OF DBUGSW. IF CHECKD
;HAS NOT BLESSED THE PRIMARY STRUCTURE (SF%CDE IS SET IN FACTSW), SYSJOB
;DOES NOT READ A COMMAND FILE. AMONG OTHER THINGS, THIS WILL PREVENT
;LOGINS FROM TERMINALS OTHER THAN THE CTY
;..
MOVX T1,<GJ%OLD!GJ%PHY!GJ%SHT>
HRROI T2,SYSJOB
SETZM T3 ;MAIN ENTRY POINT
XMOVEI T4,SJBFRK ;LOCATION TO PLACE FORK NUMBER OF SYSJOB
CALL RUNDIR ;RUN SYSJOB AND RETURN
JRST [ TMSG<
No SYSJOB
>
JRST .+1]
RUNDD5: MOVEI 1,1 ;KEEP JOB 0 IN QUEUE 1 ALWAYS
MOVEM 1,JOBBIT ;SET PRIORITY FOR CHKR
XMOVEI T1,CHKR ;GO TO CHKR IF AN INTERRUPT OCCURS
MOVEM T1,JB0XFR ;SAVE THE ADDRESS FOR JB0INT
SETZM EXPFRK ;CLEAR FORK HANDLE
SKIPN SMFLAG ;IF NOT 2020
CALL RUNMO1 ;RUN MOS MEM DIAG
SE1ENT ;Make sure we are in section one
JRST CHKR ;GO DO BACKGROUND
;ROUTINE TO RUN A PROGRAM IN A FORK UNDER JOB 0
; A/ GTJFN T1 ARGS
; B/ GTJFN T2 ARGS
; C/ OFFSET IN ENTRY VECTOR WHERE WE START FORK
; D/ LOCATION IN WHICH TO PLACE FORK NUMBER (0 IF NOT DESIRED)
; CALL RUNDII
; or
; CALL RUNDIR
;RETURNS +1: FAILED, PROGRAM NOT RUN
; +2: RUNDII - PROGRAM RAN TO COMPLETION, FORK KILLED
; RUNDIR - PROGRAM STARTED, A/ FORK HANDLE
RUNDIR: SAVEAC <Q1> ;SAVE TRASHED AC
SETZM Q1 ;NO WAIT FLAG
JRST RUNDIC ;CONTINUE
RUNDII::SAVEAC <Q1> ;SAVE TRASHED AC
SETOM Q1 ;WAIT FLAG
RUNDIC: STKVAR<EVEC,LOCFN,WFLAG,FKHNDL,FILJFN>
MOVEM C,EVEC ;SAVE OFFSET IN ENTRY VECTOR
MOVEM D,LOCFN ;SAVE LOCATION TO PUT FORK NUMBER
MOVEM Q1,WFLAG ;SAVE WAIT FLAG
GTJFN
RET ;FAILED
MOVEM T1,FILJFN ;SAVE JFN
MOVX T1,CR%CAP ;XMIT CAPABILITIES
CFORK ;CREATE A FORK FOR CHECKD
JRST [ EXCH T1,FILJFN ;SAVE ERROR CODE. GET JFN
RLJFN ;RELEASE IT
NOP
MOVE T1,FILJFN ;GET BACK ERROR CODE
RET] ;AND DONE
MOVEM T1,FKHNDL ;SAVE FORK HANDLE
SKIPN T2,LOCFN ;WANT TO SAVE FORK NUMBER?
IFSKP. ;YES
CALL GSWFRK ;(T1/T1) GET SYSTEM WIDE FORK NUMBER
JFCL ;IGNORE ERROR
MOVEM T1,(T2) ;SAVE FORK NUMBER OR ERROR CODE WHERE SPECIFIED
ENDIF.
MOVE T2,JOBBIT ;SET TO SAME AS OURS
SPRIW ;BY SETTING PRIORITY WORD
ERJMP .+1 ;JUST IN CASE
HRL T1,FKHNDL ;FORK HANDLE TO LH
HRR T1,FILJFN ;JFN TO RH
GET
ERJMP [MOVE T1,FKHNDL ;GET FORK HANDLE
KFORK ;KILL THE FORK
RET] ;AND DONE
MOVE T1,FKHNDL ;GET FORK HANDLE
MOVE 2,EVEC ;2/OFFSET IN ENTRY VECTOR
SFRKV ;START AT MAIN ENTRY
ERJMP [MOVE T1,FKHNDL ;GET HANDLE
KFORK ;KILL FORK
RET]
SKIPN WFLAG ;WANT TO WAIT?
RETSKP ;NO. RETURN NOW
WFORK
KFORK
RETSKP ;ALL DONE
;ROUTINE TO SETUP A MONITOR FORK TO HANDLE ERRORS
; ACCEPTS: T1/ 30 BIT ADDRESS OF ROUTINE TO TRANSFER TO ON ERROR
;
MONBKX::MOVEM 1,MONBK
MOVEI 1,.FHSLF ;1/THIS FORK
MOVEI 2,MICHN ;2/CHANNELS TO ENABLE
MOVEM 2,MONCHN ;MAKE THE MONITOR TAKE INTERRUPTS ON THEM
AIC ;ACTIVATE CHANNELS 34 AND 35
ERJMPR [BUG.(CHK,MONBKB,MEXEC,SOFT,<CANNOT SET MONITOR ERROR INTERRUPT>,<<T1,LSTERR>>,<
Cause: The monitor was attempting to enable interrupts on the monitor error
channels. This BUG. indicates that the AIC failed.
>,R)]
RET
;ROUTINE TO MAKE RESTART ENTRY IN SYSERR FILE
LOGSST: TRVAR <<RDDBFR,.RLBSZ>>
SAVEQ
JE SF%MST,FACTSW,LOGSS3 ;JUMP IF AUTO RESTART
MOVE T1,DBUGSW ;Get mode of system
CAIE T1,3 ;Default startup stuff?
JRST LOGSS1 ;No
MOVX T1,<ASCIZ /SA/> ;yes. It is Stand-alone then
MOVEM T1,RDDBFR ;Stash it
JRST LOGSS3 ;And go on
LOGSS1: TMSG <Why reload? > ;MANUAL RESTART, FIND OUT WHY
HRROI T1,RDDBFR
MOVX T2,RD%BRK+RD%BEL+RD%RAI+RD%CRF+20*5
MOVEI T3,0
RDTTY ;GET ANSWER
JFCL
SETZ T3, ;FLUSH TERMINATOR (PRESUMABLY NL)
DPB T3,T1
MOVE T1,[POINT 7,RDDBFR]
QLP: ILDB T2,T1 ;GET A CHAR
CAIE T2,40 ;SPACE?
CAIN T2,11 ;TAB?
JRST QLP ;ONE OF THE TWO
CAIN T2,"?" ;DID HE ASK FOR HELP?
JRST [HRROI T1,LOGMSG ;GET THE HELP MESSAGE
PSOUT ;OUTPUT IT
JRST LOGSS1] ;TRY AGAIN
MOVE T1,[-RLALEN,,RLATAB] ;SET TO VERIFY HIS ANSWER
CALL MATRLA ;SEE IF ANSWER MATCHES TABLE
JRST LOGSS2 ;NO, TELL HIM HIS CHOICES
AOBJP T1,LOGSS3 ;YES, SEE IF IT'S UNIQUE
CALL MATRLA ;ANY OTHER MATCHES?
JRST LOGSS3 ;NO, THIS IS A WINNER
LOGSS2: TMSG < Not a valid response (?=HELP)
>
JRST LOGSS1 ;TRY, TRY AGAIN
LOGSS3: MOVX T1,RL%LEN
MOVX T2,RL%SIZ
CALL ALCSEB ;GET SYSERR STORAGE
JRST [BUG.(CHK,SYSERF,MEXEC,HARD,<LOGSST-NO SYSERR STORAGE FOR RESTART ENTRY>,,<
Cause: This BUG is not documented yet.
Action:
>)
RET]
MOVEM T1,Q1
MOVE T2,[-NWHYIT,,WHYIT]
CALL SEBCPY ;COPY DATA INTO BLOCK
JFCL
MOVE T2,[-1,,[SEBPTR RL%OPR,SBTSTR,RDDBFR]]
MOVE T3,FACTSW
TXNN T3,SF%MST ;USE OPR ANSWER IF MANUAL START
MOVE T2,[-1,,[SEBPTR RL%HLT,SBTWD,BUGHLT]]
MOVE T1,Q1 ;USE BUGHLT ADDRESS OTHERWISE
CALL SEBCPY
JFCL
MOVE T1,Q1
CALL QUESEB ;QUEUE BLOCK FOR SYSERR FILE
RET
;ROUTINE TO SEE IF RDDBFR MATCHES ENTRY IN TABLE
;CALL T1/AOBJN POINTER TO TABLE
;RETURNS +1 NO MATCH
;RETURNS +2 MATCH
MATRLA: MOVE T2,[POINT 7,RDDBFR,] ;POINTER TO HIS ANSWER
MOVE T3,[POINT 7,(T1),] ;POINTER TO LEGAL ANSWERS
MATRL1: ILDB T4,T2 ;GET NEXT CHAR OF HIS ANSWER
JUMPE T4,MATRL3 ;DONE IF A ZERO CHARACTER
CAIE T4," " ;END OF FIRST WORD?
CAIN T4,.CHLFD ;END OF LINE?
JRST MATRL3 ;YES
ILDB CX,T3 ;NO, GET NEXT CHAR OF THIS ANSWER
CAIN CX,(T4) ;MATCH?
JRST MATRL2 ;YES, KEEP ON GOINT
AOBJN T1,MATRLA ;NO, TRY NEXT TABLE ENTRY
RET ;NO MATCH - NON SKIP RETURN
MATRL2: TLNN T3,760000 ;END OF THIS TABLE ENTRY?
RETSKP ;YES, SKIP RETURN
JRST MATRL1 ;NO, LOOK AT NEXT CHARACTER HE TYPED
MATRL3: CAME T2,[POINT 7,RDDBFR,6] ;ANYTHING BEFORE THE END-OF-LINE?
RETSKP ;YES, TAKE MATCH-RETURN
RET ;NO, NON-MATCH
RLATAB: ASCIZ /OPR/
ASCIZ /PARIT/
ASCIZ /POWER/
ASCIZ /STATI/
ASCIZ /HARDW/
ASCIZ /HALT/
ASCIZ /HUNG/
ASCIZ /PM/
ASCIZ /CM/
ASCIZ /SA/
ASCIZ /NEW/
ASCIZ /SCHED/
ASCIZ /OTHER/
RLALEN==.-RLATAB
LOGMSG: ASCIZ #
The following is a list of valid responses. Any comment (up to 72
characters) may be appended to a response. In case more than one
response is appropriate, choose the earliest one in the list.
Previous system problem: Different monitor wanted:
OPR NEW
PARITY SCHED
POWER
STATIC Operator doesn't know or not in list:
HARDWARE OTHER
HALT
HUNG
PM
CM
SA
#
;POINTER TABLE TO BUILD RELOAD ENTRY
WHYIT: SEBPTR 0,SBTEVC,SEC%RL ;EVENT CODE (IMMEDIATE)
SEBPTR RL%SVN,SBTSTR,SVN ;SYSTEM NAME
SEBPTR RL%STD,SBTWD,SYSTAD ;BUILD TAD
SEBPTR RL%VER,SBTWD,[EXP SVNM] ;SYSTEM VERSION NUMBER
SEBPTR RL%SER,SBTWD,APRSER ;APR SERIAL NUMBER
NWHYIT==.-WHYIT
;LOCAL ROUTINE TO READ TAD FROM CTY
; CALL RDDTAD
; RETURN +1 ALWAYS, 2/ TAD
RDDGTD: STKVAR <<RDDBFR,20>>
RDDGT1: HRROI 1,RDDBFR
MOVE 2,[RD%BRK+RD%BEL+RD%RAI+20*5]
MOVEI 3,0
RDTTY ;READ LINE FROM CTY
JRST RDDGT2 ;FAILED, REPROMPT
TXNN 2,RD%BTM ;BREAK CHAR TERMINATED INPUT?
JRST RDDGT2 ;NO, GARBAGE INPUT
HRROI 1,RDDBFR
MOVEI 2,0
IDTIM ;CONVERT STRING TO TAD
JRST RDDGT2 ;INVALID, REPROMPT
RET ;OK, RETURN IT
RDDGT2: TMSG <
? Invalid, please try again in form MMM-DD-YY HHMM: >
JRST RDDGT1 ;TRY AGAIN
;EACH SPECIAL JOB CALLS THIS TO DETACH AND START THE NEXT ONE
DONSJ: CALL LOGONM ;RECORD START OF CURRENT JOB ON LOGGING TERMINAL
MOVE 4,CTRLTT ;SAVE THIS JOB'S CONTROLLING TERMINAL
DTACH ;DETACH THE CURRENT JOB
MOVE 1,JB0TT
HRRM 1,PRIMRY ;USE JOB 0 TTY FOR ANY OUTPUT
MOVE 1,JOBNO ;GET CURRENT JOB NUMBER
CAIL 1,NSPECJ-1 ;MORE SPECIAL JOBS TO DO?
JRST [ MOVX T1,SF%PTY!SF%CTY ;NO. ALLOW CTY AND PTY LOGINS
IORM T1,FACTSW
RET] ; AND DON'T CREATE ANOTHER JOB
MOVE 2,4 ;YES. GET LINE NUMBER FOR CALL
CALLRET SPCSTJ ;START ANOTHER JOB ON SAME TTY
SPCSTJ: NOSKED
PUSH P,T2 ;SAVE LINE NUMBER
CALL STADYN ;GET ADDRESS OF DYNAMIC DATA
SKIPA ;NOT FULLY ACTIVE
JRST [ POP P,2
OKSKED
RET]
JUMPG T2,SPCST1 ;IF TEMPORARILY ACTIVE, WAIT
POP P,2 ;GET LINE NUMBER BACK
SETOM TTACTL(T2) ;INDICATE JOB STARTING
MOVEI 1,JOBSRT ;REQUEST JOB STARTUP FROM SCHED
HRL 1,2
CALL SCDRQ7
OKSKED
RET
;LINE IS TEMPORARILY IN USE. WAIT UNTIL IT'S AVAILABLE
SPCST1: POP P,1 ;RESTORE LINE NUMBER
OKSKED
HRLZS T1 ;T1/ (LINE NUMBER,,ROUTINE)
HRRI T1,TSACT1 ;ROUTINE TO WAIT FOR LINE
PUSH P,T2
MOVSI T2,FHV1 ;LOW BLOCK PRIORITY
HDISMS
POP P,T2
JRST SPCSTJ
SUBTTL Mini-EXEC
;'MINI-EXEC' - SIMPLE COMMAND INTERPRETER FOR SPECIAL FUNCTIONS
SWAPCD
EXEC2: MOVE T1,JOBBIT
IFXN. T1,LOGIOB ;LOGIN OR OUT?
BUG.(CHK,EXILGO,MEXEC,SOFT,<EXECI - Interrupt during login or logout>,,<
Cause: Control has passed to the mini-exec because the top fork hit
a terminating condition or monitor interrupt. The top fork EXEC may
have been wiped out. In addition, the job was trying to log in or
out.
Action: The fork is put into an infinite wait state since any other
action might lead to further itraps, interrupts, looping, etc.
>)
WAIT% ;YES, SOME KIND OF DISASTER. GO AWAY QUIETLY.
ENDIF.
MOVEI 1,100 ;ESTABLISH CORRECT TTY MODES
MOVE 2,NORMTF
SFMOD
MOVE 2,TTICB1
MOVE 3,TTICB2
SFCOC
CALL DTIALL ;DISABLE ALL TERMINAL INTERRUPTS
MOVE 1,[XWD 20,^D34] ;T1/ CTRL/P ON CHANNEL 34
ATI ;ASSIGN CONTROL-P FOR INTERRUPTS
MOVE 1,[MSEC1,,EXECI] ;SETUP TO GET INTERRUPTS IN MON
CALL MONBKX
MOVE 2,JOBNO
HRRZ 1,JOBDIR(2)
IFE. T1
SETZM CAPMSK ;IF NOT LOGGED, FLUSH ALL CAPS
SETZM CAPENB
MOVE 3,CTRLTT
CAME 3,CTYLNO ;ALLOW MINI-EXEC ONLY ON CTY
ANSKP.
MOVE T3,SPJCAP ;CTY, NOT LOGGED IN, GIVE ALL CAPABILITIES
MOVEM T3,CAPENB
MOVEM T3,CAPMSK
MOVEI 3,OPERDN ;YES, GET DIRECTORY NUMBER OF <OPERATOR>
MOVEM 3,JOBDIR(2) ;INDICATE LOGGED IN AS <OPERATOR>
STOR 3,JSDIR ;SAVE AS CONNECTED DIRECTORY
SETZRO JSCDF ;NO STRING IN JSB
MOVE 3,STRTAB+PSNUM ;GET SDB ADDRESS OF STRUCTURE 0 (PUBLIC)
LOAD 3,STRUC,(3) ;GET ITS UNIQUE STRUCTURE CODE
STOR 3,JSUC ;SAVE AS CONNECTED STRUCTURE CODE
MOVE 3,[[3
ASCIZ "OPERATOR"],,USRNAM]
BLT 3,USRNAM+2 ;SET DEFAULT USER NAME TO OPERATOR
ENDIF.
JN JBMX,,EXECT0 ;IF BEEN IN MX BEFORE, DONT CHECK CAPS
MOVE 1,CAPENB ;LOOK AT CAPS, ALLOW MINI-EXEC
TRNE 1,SC%WHL ;ONLY IFWHEEL
IFSKP.
SKIPE FORKN ;OTHERWISE,
HALTF ;HALTF IF BELOW EXEC
SETONE JSFLO ;REMEMBER THE FORCED LOGOUT
JRST LOGO ;LOGOUT IF TOP FORK
ENDIF.
SETONE JBMX ;REMEMBER THAT JOB WAS IN MINI-EXEC
; ..
;MINI-EXEC...
EXECT0: TMSG (MX>)
EXECT1: PBIN ;GET USER INPUT
CAIN T1,.CHCRT ;FLUSH CR
JRST EXECT1
CAIL 1,"A"+40 ;LC CHAR?
CAILE 1,"Z"+40
SKIPA ;NO
SUBI 1,40 ;YES, CONVERT
CAIN T1,.CHLFD ;IGNORE BLANK LINE
JRST EXECT0
MOVSI 4,-NXCMD ;SCAN COMMAND TABLE
EXECT2: HLRZ 2,XCMD(4) ;GET KEY LETTER FOR THIS COMMAND
CAMN 1,2 ;SAME AS JUST TYPED?
JRST [ HRRZ 2,XCMD(4) ;YES, GET DISPATCH ADDRESS
JRST 0(2)] ;GO TO IT
AOBJN 4,EXECT2 ;TRY ALL COMMANDS
JRST EXERR ;NOT FOUND, INDICATE ERROR
;MINI-EXEC COMMANDS
DEFINE CM (NAM,LOC)<
XWD "NAM",LOC>
XCMD:
REPEAT 0,<
CM B,EBLT ;BLT SWP MON
>
CM D,EDMP ;DUMP ON FILE
CM E,GEX ;EXEC
CM G,EGET ;GET FILE
CM J,EJMP ;JUMP TO ADDRESS
CM R,EREST ;RESET
CM S,EST ;START
CM <^>,MRETN ;DO MRETN
CM </>,TODDT ;GO TO MDDT
NXCMD==.-XCMD
;'/' - ENTER MDDT
TODDT: GTOKM (.GOMDD,) ;ASK FOR PRIVS
JRST LMDDT ;GO TO DDT
;'BLT SWP MON' - BLT SWAPPABLE CODE TO USER SPACE. SHOULD DO RESET FIRST,
;THEN DUMP ON DTA--
REPEAT 0,<
EBLT: TMSG <LT SWP MON>
CALL OKGO
MOVE 2,SWCEND ;LST PAGE
LSH 2,^D9
MOVE T1,[NRCOD,,NRCOD]
XBLTMU [BLT 1,777(2)]
JRST EXEC2
> ;END OF REPEAT 0
;'RESET'
EREST: TMSG <ESET>
CALL OKGO
CALL DRESET ;DO THE RESET
JRST EXEC2
;DRESET IS COMMON ROUTINE USED BY SEVERAL COMMANDS TO DO A RESET
DRESET: MOVEI 1,-4
KFORK ;KILL ALL FORKS
MOVNI 1,1
MOVSI 2,400000
MOVE 3,[1B0+1000] ;CLEAR ALL PAGES FROM USER MAP
PMAP
MOVNI 1,1 ;CLOSE ALL FILES
CLOSF
JFCL
RET
;OKGO - ROUTINE TO LOOK FOR CONFIRMATION AFTER MINI-EXEC HAS
;TYPED THE COMPLETION OF THE COMMAND.
; CALL OKGO
;RETURNS +1: CONFIRMATION FOUND
;IF NO CONFIRMATION WAS FOUND, GOES TO ERROR ROUTINE
OKGO: PBIN
CAIN T1,.CHCRT ;FLUSH CR
JRST OKGO
CAIN T1,.CHLFD ;CRLF MEANS GO
RET
NODD1: POP P,1 ;ANYTHING ELSE MEANS ABORT
JRST EXERR
;'EXEC'
GEX: TMSG <XEC>
CALL OKGO ;CONFIRM
CALL DRESET ;CLEAR PREVIOUS PROGRAM TO GUARANTEE CINITF IN EXEC IS CLEAR
;HERE TO GET A NEW COPY OF THE EXEC. REACHED FROM MINI-EXEC 'EXEC'
;COMMAND OR WHEN A NEW JOB IS BEING CREATED. IF FILE EXISTS,
;GOES TO START IT. IF NOT, PRINTS MESSAGE AND GOES TO MINI-EXEC
STEX: MOVSI 1,(GJ%OLD!GJ%PHY!GJ%SHT) ;OLD FILE+SHORT FORM
HRROI 2,[ASCIZ /DEFAULT-EXEC:/]
GTJFN
STEXF: JRST [ SKIPE CRJFLG ;IS THIS A CRJOB FAILURE?
JRST CRJMEX ;YES. GO GIVE FAIL CODE
TMSG <NO EXEC>
JRST EXCRR]
HRLI 1,.FHSLF
GET
ERJMP STEXF ;CATCH FAILURE OF GET
SKIPN CRJFLG ;CREATED JOB?
JRST GEX1
RET ;RETURN TO FINISH CRJOB STUFF
CRJMEX: MOVEI T1,CRJBX2 ;PREVENT CRJOB GETTING INTO MINIEXEC
SKIPGE CRJFLG ;ALREADY HAVE AN ERROR?
MOVEM T1,CRJANS ;NO, GIVE ERROR CODE TO CREATOR,
HRLI T2,1 ;INDICATE JOB HAS ALREADY SET CRJANS
HLLM T2,CRJFLG ; BY MAKING FLAG POSITIVE
JRST LOGO ;AND FLUSH OUT THIS JOB.
;'JUMP TO ADDRESS' - JUMP TO USER ADDRESS
EJMP: TMSG <UMP TO >
MOVEI 1,100
MOVEI 3,^D8 ;GET OCTAL ADDRESS
NIN
JRST EXERR
HRRZM 2,-1(P) ;SAVE ADDRESS
BKJFN ;BACKUP TO READ TERMINATOR
JFCL
CALL OKGO
JRST MRETN ;RETURN TO USER ADDRESS ON STACK
;'GET FILE'
EGET: TMSG <ET FILE >
MOVSI 1,(1B2+1B4+1B16+1B17) ;OLD FILE,CONFIRM,IFOF,SHORT
MOVE 2,[XWD 100,101]
GTJFN
JRST EXERR
HRLI 1,400000 ;THIS FORK
GET
ERJMP EXERR
JRST EXEC2
;'START' - STARTS PROGRAM GOTTEN VIA 'GET'
EST: TMSG <TART>
CALL OKGO
GEX1: MOVE 1,EVADDR
JUMPN 1,.+2
UMOVE 1,120 ;USE JOBSA
MOVEM 1,-1(P)
JRST MRETN
;'DUMP ON FILE'
EDMP: TMSG <UMP ON FILE >
MOVSI 1,(1B0+1B3+1B4+3B17) ;NEW V,PNT O/N,CONFRM,IFOF,SHRT
MOVE 2,[XWD 100,101]
GTJFN
JRST EXERR
HRLI 1,400000 ;THIS FORK
MOVE 2,[XWD -1000,520000] ;SAVE ALL ADDRESS SPACE
SETZ 3,
SSAVE
JRST EXEC2
;ERROR CONDITION - PRINT A QUESTION MARK AND GO BACK TO START OF
;MINI-EXEC
EXERR: TMSG < ?>
MOVEI 1,100
CFIBF ;CLEAR INPUT BUFFER
;PRINT CARRIAGE RETURN/LINE FEED
EXCRR: SKIPE CRJFLG ;IS THIS A CRJOB?
JRST CRJMEX ;YES. GET OUT OF MINIEXEC.
TMSG <
>
JRST EXEC2
EXCRRW: TMSG <
>
JRST EXEC2
SUBTTL
;PSI TRAPPED TO HERE
EXECI:: XCT FRKNOP ;NOP UNLESS MDDT BPT SET
EXCH 1,ITFFL ;SAVE 1, GET TRAP FL
TLNN 1,(UMODF) ;USER?
JRST EXECI1 ;NO
MOVEM 1,FFL ;SET FLAGS
MOVE 1,ITFPC ;SET PC
MOVEM 1,FPC ;YES, ENTER MONITOR AT THAT LOC
MOVE 1,ITFFL ;RESTORE AC1
EXECI2: MCENTR
SETOM PRIMRY
SKIPE CRJFLG ;IS THIS A CRJOB?
JRST CRJMEX ;YES. GET OUT OF MINIEXEC.
MOVEI 1,100
CFIBF ;CLEAR INPUT BUFFER
ERJMP EXECI4 ;error while attempting to LOG IN/OUT
CALL CLRINT ;CLEAR THE SOFTWARE INTERRUPT SYSTEM
TRNN 2,2 ;CHANNEL 34?
JRST EXECI3
MOVEI 1,-4
FFORK ;FREEZE FORKS
MOVEI 1,101
CFOBF ;CLEAR OUTPUT BUFFER
ERJMP EXECI4 ;error while attempting to LOG IN/OUT
TMSG <
ABORT
>
JRST EXEC2
EXECI1: MOVE P,UPP ;RESTORE TOP OF PDL
MOVE 2,1(P) ;GET USER PC
MOVEM 2,FPC ;STORE PC
MOVX T1,USRCTX ;SET USER MODE FLAGS WORD
MOVEM 1,FFL
JRST EXECI2
EXECI3: TMSG <
INTERRUPT AT >
MOVEI 1,101
HRRZ 2,UPP
MOVE 2,1(2) ;GET TOP PC
MOVEI 3,10 ;RADIX
NOUT ;PRINT ADDRESS
JFCL
JRST EXCRRW ;TO MINI-EXEC IF SC%WHL
EXECI4: MOVE T1,JOBNO ;get current job number
HLRZ T1,JOBPT(T1) ;get controlling TTY:
MOVE T2,LSTERR ;get last error this process
BUG.(INF,LGFAIL,MEXEC,SOFT,<LGOUT or LOGIN JSYS failed>,<<T1,JOBPT>,<T2,LSTERR>>,<
Cause: An attempt to log in/out a job has failed when it should have succeded.
The most likely cause of this is terminals that have been TTYSTPed,
then a LGOUT or LOGIN JSYS was attemped. An attempt to detach the
terminal, then logout the job is made. If either of these fail,
the job is put in a permanent wait state.
Action: None.
Data: The terminal number, and the reason of the failure.
>)
DTACH ;attempt to detach myself
ERJMP .+1 ;ignore errors
SETOM T1 ;me
LGOUT ;logout myself
ERJMP .+1 ;ignore errors
WAIT ;can't log myself out, go to sleep
ERJMP .+1 ;ignore errors
JRST .-2 ;try to sleep again.
;JSYS TO ENTER MDDT
.MDDT:: MCENT
MOVEI 1,SC%WHL+SC%OPR
TDNN 1,CAPENB
JRST WHEELX ;NO PRIVS
JRST TODDT
RESCD
;HERE WHEN USER TYPES "EDDT$G" IN MDDT. DON'T GO TO EDDT UNLESS IT
;IS LOADED AND LOCKED DOWN. USERS WHO WANT TO ANYWAY CAN TYPE "DDTX$G".
EDDT=:<MSEC1,,.> ;START IN SECTION 1 ON EDDT$G FROM MDDT
SKIPE DDTPRS ;IS EDDT PRESENT AND LOCKED?
JRST @[SYMSEC,,DDTX] ;YES, GO TO IT
TMSG <
? EDDT is not locked down - call LCKINI from MDDT first
>
JRST LMDDT ;RETURN TO MDDT
;BUGHLT IN JOB CONTEXT TRAPS TO HERE
EXBUGH::SETZM NSKED ;BE OKSKED
SETZM CRSKED ;BE NOT 'CRITICAL SECTION'
SETOM TRAPC
MOVE 1,UPDL ;RESET STACK, ETC.
MOVEM 1,FPC ;SET PC
MOVX T1,USRCTX ;SET USER MODE FLAGS WORD
MOVEM 1,FFL
MCENTR
SETZM INTDF
SKIPN JOBNO ;JOB 0?
JRST CHKRI ;YES, INTERRUPT
HRRZ 1,PRIMRY
HRROI 2,[ASCIZ /
BUGHLT at /]
SETZ 3,
SOUT
HRRZ 2,BUGHLT
MOVEI 3,^D8
NOUT
JFCL
TMSG <
>
ITERX ;GENERATE ITRAP
SWAPCD
;HALT SYSTEM - REQUIRES SC%MNT (OR SC%WHL ETC.) CAPABILITY
;ACCEPTS TIME OF SYSTEM SHUTDOWN AND INITIATES SHUTDOWN PROCESS,
;INCLUDING NOTIFYING USERS, ETC. ALSO ACCEPTS TIME WHEN SYSTEM
;WILL BE BACK UP WHICH IS AVAILABLE FOR USER INFORMATION ONLY.
; 1/ SHUTDOWN TIME (GTAD FORMAT)
; 2/ EXPECTED UP TIME (GTAD FORMAT)
; HSYS
; RETURNS +1: ERROR
; RETURNS +2: SUCCESS
.HSYS:: MCENT
MOVE 2,CAPENB ;CHECK USER CAPABILITIES
TXNN 2,SC%WHL+SC%OPR+SC%MNT ;USER ALLOWED TO DO HALT?
RETERR(CAPX2) ;NO, RETURN BAD
JUMPG 1,HSYS1 ;JUMP UNLESS ABORTING SHUTDOWN
MOVE T1,HSYST1 ;GET OLD TIME
JUMPE T1,HSYS0 ;IF NONE, DONT TYPE MESSAGE
SETZM HSYST1 ;CLEAR OLD TIME
CALL TADDIF ;GET MILLISECONDS TO SHUTDOWN
HRROI T2,[ASCIZ/
[Shutdown canceled]
/]
MOVX T3,SF%MS1
TDNE T3,FACTSW ;WANT LEVEL 1 MESSAGES?
SKIPGE HSYST3 ;WAS A MESSAGE EVER PRINTED
SKIPA
CALL ALLMSG ;YES, INFORM USERS OF CANCELLATION
HSYS0: SMRETN ;SUCCESSFUL RETURN
HSYS1: PUSH P,1 ;HOLD THE DESIRED SHUTDOWN
CALL TADDIF ;COMPUTE MILLISECONDS TO SHUTDOWN
TLNE 1,770000 ;OVER A WEEK AHEAD, OR NEGATIVE?
RETERR(TIMEX2) ;YES, GIVE BAD TIME FAILURE
POP P,2 ;RECOVER SHUTDOWN TIME
MOVEM 2,HSYST1 ;STORE FOR EXEC TO SEE
SETOM HSYST3 ;FLAG FOR FIRST MESSAGE
UMOVE 2,2 ;GET EXPECTED UP TIME
CAMG 2,HSYST1 ;CHECK RANGE
SETZ 2, ;JUNK, ASSUME UNKNOWN
MOVEM 2,HSYST4 ;SAVE FOR EXEC TO TELL USERS
AOS JB0FLG ;POKE JOB 0 TO DO MSG
SMRETN
;COMPUTE TIME UNTIL SHUTDOWN IN MILLISECONDS
; A/ TAD OF SHUTDOWN
; CALL TADDIF
; RETURN +1, A/ MILLISECONDS TO SHUTDOWN
TADDIF: PUSH P,1
CALL LGTAD ;GET CURRENT TIME AND DATE
POP P,2
SUBM 2,1 ;GET POSITIVE DIFFERENCE OF TIMES
CAML T1,[^D8,,0] ;WITHIN 8 DAYS?
JRST [ MOVSI T1,377777 ;NO, RETURN VERY LARGE NUMBER
RET]
MUL T1,[^D<24*3600*1000>] ;MILLISECONDS/DAY
DIV T1,[1B17] ;SHIFT BINARY POINT
RET
;HSYST1 AND HSYST4 ARE A GETAB TABLE
NHSYST==2 ;NUMBER OF VALUES IN GETAB TABLE
NR HSYST1,1 ;SYSTEM SHUTDOWN TIME OR 0
NR HSYST4,1 ;EXPECTED UP TIME
NR HSYST2,1 ;INTERVAL (IN MS) TO NEXT MSG TIME
NR HSYST3,1 ;TIME OF NXT MSG IN MS BEFORE SHUTDOWN
;POINTS (IN MINUTES BEFORE SHUTDOWN) AT WHICH TO DO NOTIFICATION
CTIMS: ^D<BYTE (9) 60,30,15,10>
^D<BYTE (9) 5,1,0>
;ROUTINE TO TYPE SYSTEM SHUTDOWN MESSAGE IF NECESSARY.
;CALLED ONLY BY JOB 0 CHKR.
CHKHSY: SKIPE A,HSYST1 ;SHUTDOWN ABORTED?
CAMN A,[-1] ;OR IS SYSTEM SHUTDOWN?
RET ;YES
CALL TADDIF ;COMPUTE TIME UNTIL SHUTDOWN
MOVE 3,HSYST3 ;DUE TIME FOR MESSAGE
CAMN 3,[-1] ;FIRST TIME HERE?
JRST CHKHS3 ;YES - GIVE MESSAGE ANYWAY
CAMLE 1,HSYST3 ;NO - MESSAGE DUE NOW?
JRST [ SUB 1,HSYST3 ;NO, COMPUTE INTERVAL TO NEXT MSG
MOVEM 1,HSYST2 ;LEAVE IT FOR CHKR
RET] ;RETURN QUIETLY
CHKHS3: ADDI 1,^D30000 ;ROUND TO NEAREST MINUTE
IDIVI 1,^D60000 ;CONVERT TO INTEGER MINUTES
JUMPLE 1,CHKHS4 ;IF NO TIME LEFT, GO KILL SYSTEM
CALL THSYS ;SEND MSG TO ALL TTYS
CAILE 1,^D60 ;LESS THAN AN HOUR?
JRST [ MOVEI 2,^D60 ;NO - SET NEXT MESSAGE FOR 1 HOUR NOW
CAILE 1,^D120 ;BETWEEN 1 AND 2 HOURS
MOVEI 2,^D120 ;MAKE FIRST NOTICE BE AT 1 HOUR
JRST CHKHS5]
MOVE 3,[POINT 9,CTIMS] ;SETUP TO FIND NEXT NOTIFY TIME
ILDB 2,3 ;GET A TIME FROM LIST
CAMG 1,2 ;SHORTER THAN ACTUAL TIME REMAINING?
JRST .-2 ;NO, KEEP LOOKING
CHKHS5: IMULI 2,^D60000 ;CONVERT MINUTES TO MILLISECONDS
MOVEM 2,HSYST3 ;SET AS NEXT MESSAGE TIME
JRST CHKHSY ;FINAL CHECK AND RETURN
;SHUTDOWN TIME HAS ARRIVED, COMMENCE SHUTDOWN.
CHKHS4: MOVX T1,SF%RMT!SF%LCL!SF%PTY!SF%MCB!SF%NVT
ANDCAM T1,FACTSW ;ONLY ALLOW CTY TO LOGIN
MOVX T1,SF%CTY ;MAKE SURE CTY CAN LOG IN
IORM T1,FACTSW ;EVEN IF HE COULD NOT DO IT BEFORE
CALL DWNMSG ;SEND LAST MESSAGE
SETOM HSYST1 ;CLEAR FLAGS IN CASE RESTARTED
MOVE T1,CTYLNO ;SET UP CTY MESSAGE
TXO T1,.TTDES
HRROI T2,[ASCIZ/
OPERATOR - WAIT FOR THE MESSAGE 'Shutdown complete' BEFORE
ENTERING COMMANDS TO PARSER
/]
SETZ T3, ;STOP ON ZERO BYTE
SOUT ;SEND MESSAGE TO CTY
MOVSI T1,(1B1) ;CREATE FORK WITH SAME CAPS
CFORK
BUG.(HLT,HSYFRK,MEXEC,soft,<HSYS-JOB 0 CFORK FAILED>,,<
Cause: This will occur if the CFORK JSYS fails to create a fork for
shutting down the system.
This failure will occur if the forks are totally used up, or if job
0 has used the maximum number of forks permitted. NUFKS contains this
maximum number.
>)
MOVE T2,[MSEC1,,HSYS4] ;SET IT TO START NEXT SHUTDOWN PHASE
MSFRK ;START FORK IN MONITOR MODE
RET
;FORK STARTED AT SHUTDOWN TIME
;COMMENCE SHUTDOWN. PREVENT NEW JOBS, LOGOUT EXISTING JOBS, HALT.
HSYS4: MOVX T1,USRCTX ;USER MODE FLAGS WORD
MOVEM 1,FFL ;ESTABLISH USUAL JSYS CONTEXT
SETZM FPC ;SET PC
MCENTR
MOVX T1,SF%RMT!SF%LCL!SF%PTY!SF%MCB!SF%NVT
ANDCAM T1,FACTSW ;ONLY ALLOW CTY TO LOGIN
MOVE 6,[XWD -NJOBS+1,1] ;START WITH JOB 1
SKIPGE JOBRT(6) ;LOOK FOR EXISTING JOB
HSYS41: AOBJN 6,.-1
JUMPGE 6,HSYS7 ;JUMP IF DONE
HLRZ 1,JOBPT(6) ;CHECK CTRLTT FOR JOB
CAMN 1,CTYLNO ;CTY?
JRST HSYS41 ;YES, DON'T FLUSH
MOVEI 1,0(6) ;GET JOB NUMBER
CALL LCL2GL ;CONVERT LOCAL JOB INDEX TO GLOBAL JOB #
JRST HSYS41 ;NOT THERE?
LGOUT ;LOG IT OUT
JFCL
JRST HSYS41
HSYS7: MOVEI 5,^D120000 ;MAX TIME TO WAIT FOR JOBS TO FINISH
ADD 5,TODCLK ;LOGGING OUT
HSYS8: CAMG 5,TODCLK ;WAITED MAX TIME?
JRST HSYS9 ;YES, PROCEED WITH SHUTDOWN
MOVE T2,HSYST4 ;GET TIME BACK UP
MOVEI T1,^D12 ;SHOULD BE CODE FOR REASON FOR HALT
;BUT FOR NOW, JUST SAY "SCHEDULED DOWN"
CALL MNTHLT ;TELL THE NETWORK WE ARE GOING AWAY
MOVE 6,[XWD -NJOBS+1,1] ;START WITH JOB 1
SKIPGE JOBRT(6) ;SEE IF ANY JOBS STILL EXIST
HSYS81: AOBJN 6,.-1
JUMPGE 6,HSYS9 ;NONE FOUND, PROCEED
HLRZ 1,JOBPT(6) ;CHECK FOR CTY JOB
CAMN 1,CTYLNO
JRST HSYS81 ;YES, IGNORE
MOVEI 1,^D1000 ;NO, WAIT 1 SEC., THEN CHECK AGAIN
DISMS
JRST HSYS8
HSYS9: CALL PHYLOG ;LOG DISK, TAPE STATISTICS
SETZM DDTIME ;POKE DDMP
AOS JB0FLG
MOVEI 5,^D10 ;WAIT 10 SEC MAX FOR JOB 0
HSYS91: MOVEI 1,^D1000 ;WAIT 1 SEC
DISMS
SKIPN DDTIME ;DDMP FINISHED?
SOJG 5,HSYS91 ;NO, WAIT MORE
JUMPLE 5,HSYS9 ;IF TIMED OUT, TRY AGAIN
SKIPE IOIP ;WRITES IN PROGRESS?
JRST .-1 ;YES, WAIT FOR COMPLETION
MOVE T1,CTYLNO
TXO T1,.TTDES ;MAKE VALID DESIGNATOR
HRROI T2,[ASCIZ /
Shutdown complete
/]
TTMSG ;NOTIFY OPERATOR
ERJMP .+1 ;IN CASE OF REFUSALS
MOVEI T1,^D15000
DISMS
HALTF
;ROUTINE TO SEND GOING DOWN MESSAGE TO ALL LINES
THSYS: STKVAR <TIM,<MSG,20>>
MOVEM T1,TIM ;SAVE NUMBER OF MINUTES
HRROI T1,MSG ;INIT PTR TO MSG
HRROI T2,[ASCIZ /
[System going down/]
SETZ T3,
SOUT
MOVE T2,TIM ;GET TIME
CAILE T2,^D60 ;LESS THAN ONE HOUR?
JRST THSYS1 ;NO - SPECIAL MESSAGE
HRROI T2,[ASCIZ / in /]
SETZ T3,
SOUT
MOVE T2,TIM ;GET TIME
CAIN T2,1 ;THE 'ONE' CASE?
JRST [ HRROI T2,[ASCIZ /one minute!!]
/]
JRST HSYS51] ;YES, SPECIAL MESSAGE
MOVEI T3,^D10
NOUT
JFCL
HRROI T2,[ASCIZ / minutes/]
SETZ T3,
SOUT ;APPEND TO MESSAGE
THSYS1: HRROI T2,[ASCIZ / at /]
SETZ T3,0
SOUT
MOVE T2,HSYST1 ;TELL ACTUAL TIME
MOVEI T3,0
ODTIM ;IN MESSAGE
HRROI T2,[ASCIZ /]
/]
HSYS51: SETZ T3,
SOUT
HRROI T2,MSG ;POINT TO CONSTRUCTED MSG
MOVE T3,FACTSW
MOVE T4,TIM
SKIPL HSYST3 ;THE FIRST TIME? OR...
CAIG T4,5 ;5 MIN OR LESS?
CAIA ;YES, ALWAYS SEND
TXNE T3,SF%MS1 ;WANT LEVEL 1 MESSAGES?
CALL ALLMSG ;SEND TO ALL LINES
MOVE T1,TIM ;RESTORE TIME
RET
;ROUTINE TO SEND LAST MESSAGE, INCLUDING EXPECTED UPTIME.
DWNMSG: STKVAR <<MSG,20>>
HRROI T1,MSG
HRROI T2,[ASCIZ /
[Timesharing is over/]
SETZ T3,
SOUT
SKIPN HSYST4 ;HAVE AN UPTIME?
JRST DWNMS1 ;NO
HRROI T2,[ASCIZ /, up again at /]
SOUT
MOVE T2,HSYST4 ;GET UPTIME
MOVEI T3,0 ;STANDARD FORMAT
ODTIM ;CONVERT TIME TO TEXT
DWNMS1: HRROI T2,[ASCIZ /]
/]
SETZ T3,
SOUT
HRROI T2,MSG ;HAVE TEXT, NOW SEND IT TO ALL LINES
CALL ALLMSG
RET
SUBTTL CHKR - Job 0 Periodic Checker
;PERIODIC (10 SEC) CHECK OF THINGS
CHKR:: TSTMS0 ;BE SURE NO SECTION 0
SETZM JB0FLG ;CLEAR REQUEST FLAG
MOVE 1,TODCLK
ADD T1,CHKPER ;NOW PLUS MAX CHECK PERIOD
MOVEM 1,CHKTIM ;LEAVE FOR SCHED TO CHECK
SETZM CHKDUE ;RESET THE OVERDUE COUNTER
IFN <FTKLIPA>,<
; CALL SC.ALM ;Insure enough free space for SCA
CALL SC.RAP ;Reap SCA data as necessary
>;End IFN <FTKLIPA>
CALL KNIJB0 ;Check on the KLNI's
CALL IPACHK ;Check on the KLIPA
; IFN CFSCOD,<
CALL CFSKPR ;Tell CFS
; >
REPEAT 0,< ;CFSCOD NO LONGER USED
IFE CFSCOD,<NOP>
> ;END REPEAT 0
; IFN CFSCOD,<
CALL CFTADC ;See if a TAD is around
IFSKP. ;If so
STAD ;Set it
NOP ;
CALL DTTIME ;If a KL, tell the FE
ENDIF.
CALL CFSJ0 ;And see if any background action is needed
; > ;IFN CFSCOD
CALL KLPRCT ;DO PERIODIC CI READ-COUNTERS
CALL RESLCK ;LOCK OR UNLOCK RESIDENT FREE SPACE
CALL DTEPOL ;GO SEE IF ANY DTE'S NEED ATTENTION
CALL MNTCHK ;KEEP MULTINET RUNNING
SKIPL DRMJ0R ;DRUM JOB 0 REQUEST?
CALL CHKDRM ;YES
MOVE 1,DSKRCE ;DISK RECOVERABLE ERRORS
CAME 1,CHKDRE ;DIFFERENT THAN LAST CHECK?
CALL CHKDE1 ;YES, GO PRINT INFO
MOVE 1,DSKNRE ;DISK NON-REC ERRORS
CAME 1,CHKDNE ;DIFFERENT?
CALL CHKDSK ;PRINT INFO
SKIPE MTAJB0 ;MTA ON LINE INTERRUPT?
CALL MTASSP ;YES REQUEST SETSPD
IFE FTNSPSRV < ;[6.1]
CALL DCNJB0 ;Do DECnet periodic functions
>
SKIPE USGBEG ;CHECK USAGE QUEUE
CALL USGMES ;HAVE SOMETHING - EMPTY QUEUE
CALL CHKCKP ;CHECK ON CHECKPOINT
CALL CHKASC ;Check for accounting shift change
CALL CHKBGS ;CHECK IF TIME TO STORE ASCII TIME
SKIPE A,HSYST1 ;SHUTDOWN PROCESS ACTIVE?
CAMN A,[-1] ;OR IS SYSTEM SHUTDOWN
SKIPA ;SYSTEM SHUTDOWN OR PROCESS NOT ACTIVE
CALL CHKHSY ;YES, CHECK IT
CALL IMICHK ;MAKE SURE IMP INPUT Q'S EMPTIED
MOVE A,TODCLK
CAMGE A,UMSGTM ;TIME FOR USER MESSAGES?
JRST CHKUM1 ;NO
CALL CHKDKS ;CHECK DISK SPACE
CALL CHKDMS ;CHECK DRUM SPACE
CALL CHKSPT ;CHECK SPT SPACE
MOVE A,TODCLK ;SET TIME FOR NEXT MSG
ADD A,[^D<5*60000>] ;IN 5 MINUTES
MOVEM A,UMSGTM
CHKUM1:
CALL CHKMOS ;CHECK IF MEMORY DIAG NEEDS TO RUN
MOVEI A,^D30000 ;SETUP TO DISMISS FOR 30 SEC
SKIPE B,HSYST1 ;SHUTDOWN ACTIVE?
CAMN B,[-1] ;OR SYSTEM SHUTDOWN?
SKIPA ;NO SHUTDOWN OR ALREADY SHUTDOWN
SKIPGE B,HSYST2 ;YES, REASONABLE TIME TO WAIT?
JRST CHKUM2 ;NOT ACTIVE OR BAD TIME
CAMLE A,B ;LESS THAN 30 SECONDS AWAY
MOVE A,B ;YES, DISMISS UNTIL THEN
;..
;..
CHKUM2: MOVE B,DDTIME ;Time for DDMP
SUB B,TODCLK ;Relative time for DDMP
IFG. B ;If still in the future
CAMLE A,B ;Will we run in time?
MOVE A,B ;No. So use this time instead
ENDIF.
CALL SETBKT ;SETUP TIME FOR DISMISS TEST
HRRI A,JB0TST ;OR JB0FLG
MOVSI B,FHV1 ;LOW BLOCK PRIORITY
HDISMS
JRST CHKR
;MAXIMUM CHECK PERIOD - USED TO SET SCHEDULER ALARM
RESCD
CHKPER::^D<1*60000> ;1 MINUTE - CHKR ALARM PERIOD
DDPPER::^D<1*60000> ;1 MINUTE - DDMP ALARM PERIOD
JB0TST: SKIPE JB0FLG ;EXPLICIT REQUEST?
JRST 1(4) ;YES, WAKEUP
JRST BLOCKT ;NO, GO TEST TIME
;Test routine for DDMP
DDPWAT: MOVE T1,TODCLK ;Get now
SKIPN DDCFSF ;Force for CFS?
CAML T1,DDTIME ;Time to do it?
JRST 1(4) ;yes
SKIPN DDPDUE ;ddmp force?
JRST 0(4) ;no
JRST 1(4) ;yes
;Test routine for "start-up" DDMP fork
TEWAIT: SKIPE DDCFSF ;Want to run?
JRST 1(4) ;Yes
JRST 0(4) ;No
SWAPCD
NR UMSGTM,1 ;TIME OF NEXT USER MESSAGES
NR MTCHNG,1 ;FLAG FOR MTA STATUS CHANGE
;JB0INT - HERE WHEN INTERRUPT OCCURS IN FORK 0
;THIS ROUTINE IS POINTED TO BY MONBK. THE SCHEDULER TRANSFERS
;CONTROL TO HERE WHEN AN INTERRUPT OCCURS ON CHANNEL 34 OR 35 IN
;FORK 0. JB0XFR CONTAINS THE ROUTINE TO WHICH THIS CODE TRANSFERS
;AFTER CLEANING THINGS UP
JB0INT: BUG.(CHK,JB0INX,MEXEC,SOFT,<UNEXPECTED INTERRUPT IN JOB 0 DURING INITIALIZATION>,<<ITFPC,PC>,<JB0XFR,NEWPC>,<LSTERR,LSTERR>>,<
Cause: An unexpected error has occurred in Job 0 which results
in control being transferred to the default error handler.
This has happened during job 0 initialization.
The error handler will attempt to reset the context and
continue at the specified error address,
however some system resources may be
hung as a result of locks not being cleared. The stack
can be examined to determine what was in progress when
the error occurred.
Data: 1. PC at which error occurred.
2. Address to which control will be transferred after cleanup.
3. Last error code in this fork.
>)
SETZM NSKED ;BE OKSKED
SETZM CRSKED ;BE NOT 'CRITICAL SECTION'
MOVX CX,USRCTX
MOVEM CX,FFL ;RESET CONTEXT
MCENTR
MOVE T1,[XWD MSEC1,J0EMER] ;IN CASE OF EMERGENCY
CALL MONBKX
CALL CLRINT ;CLEAR THE INTERRUPT SYSTEM
MOVE T1,FORKX ;T1/ FORK NUMBER
SETZM T2 ;T2/ ALL INTERRUPT LEVELS
CALL JSBSTF ;CLEAN THE JSB STACK
MOVE T1,FORKX ;T1/ FORK NUMBER
SETZM T2 ;T2/ ALL LEVELS
CALL GOKFRE ;CLEAN UP GETOK QUEUES (SHOULDN'T HAVE ANY)
MOVE T1,[XWD MSEC1,JB0INT] ;BACK TO HERE IF ANOTHER INTERRUPT
CALL MONBKX
MOVE T1,JB0XFR ;SEE WHERE WE ARE TO GO NEXT
JRST 0(T1) ; AND GO THERE
;HERE WHEN AN ERROR OCCURRED WHILE IN JB0INT. GIVE UP.
J0EMER: BUG.(HLT,STRTER,MEXEC,soft,<FATAL ERROR WHILE PROCESSING PREVIOUS STARTUP ERROR>,,<
Cause: When a software channel 34 or 35 interrupt happens on fork
0, the monitor transfers control to the routine specified in
MONBK. This address will often be the starting address of
JB0INT. JB0INT handles errors in fork 0. While JB0INT is doing its
error recovery, it sets MONBK to J0EMER, so that this STRTER BUGHLT
will occur if another error happens during JB0INT execution.
>)
;CLRINT - CLEAR THE INTERRUPT SYSTEM
CLRINT: MOVEI 1,400000 ;DEACTIVATE SOFTWARE INTERRUPT CHANNELS
SETO 2, ; FOR THIS PROCESS
DIC
CALL DTIALL ;IN CASE PROGRAM TURNED ANY ON
MOVE 2,PSIBW
CIS ;CLEAR ALL INTERRUPTS IN PROGRESS
RET
;Here to put number in message and provide time stamp.
; T1/ byte pointer to use
CHKH1: CALL TTDECP ;OUTPUT DECIMAL
MOVEI 2," "
IDPB T2,T1 ;PUNCTUATE
PUSH P,T1 ;SAVE POINTER
CALL LGTAD ;CURRENT TIME AND DATE
MOVE T2,T1
POP P,T1
SETZM T3
IFG. T2
ODTIM ;INCLUDE TAD WITH MESSAGE
ENDIF.
HRROI T2,[ASCIZ /
/]
SOUT ;MAKE IT PRETTY
RET
;Routine to see if a KLIPA load/dump is needed.
;Returns:
; +1 did something
; +2 didn't
IPACHK: CALL CHKKLP ;(/T2) Ask the port driver
RETSKP ;NOTHING NEEDED
MOVX T1,GJ%SHT!GJ%OLD ;EXISTING FILE
SETZM T3 ;main entry, please
SKIPE T2 ;LOADING?
IFSKP.
;We will try to load the port's u-code
HRROI T2,[ASCIZ /PS:<SYSTEM>IPALOD.EXE/] ;The file
XMOVEI T4,CILFRK ;PLACE TO PUT FORK NUMBER OF IPALOD
CALL RUNDII ;Do it
SKIPA ;Failed
RET ;Did it. Say so.
BUG.(CHK,NOLODF,MEXEC,SOFT,<Could not find CI-20 microcode load program>,,<
Cause: The KLIPA (IPA20) RAM needs to be reloaded. The file PS:<SYSTEM>IPALOD.EXE
is supposed to be run to do this. However, the file does not exist.
TOPS-20 is ignoring the CI-20.
Action: If you wish to use the CI, you must create the load file and run it
from the EXEC.
>)
CALL KLPNLF ;DECLARE THE KLIPA DEAD
RET
ENDIF.
;We will try to dump the port's u-code
HRROI T2,[ASCIZ /PS:<SYSTEM>IPADMP.EXE/] ;The file
XMOVEI T4,CIDFRK ;PLACE TO PUT FORK NUMBER OF IPADMP
CALL RUNDII ;Do it
SKIPA ;Failed
RET ;Did it. Say so.
BUG.(CHK,NODMPF,MEXEC,SOFT,<Could not find CI-20 microcode dump program>,,<
Cause: The KLIPA (IPA20) RAM needs to be dumped. The file PS:<SYSTEM>IPADMP.EXE
is supposed to be run to do this. However, the file does not exist.
Action: Something has happened which warrants dumping the CI-20 microcode in
order to get information to diagnose a problem. It is advisable to put
the dump program on the system.
>)
CALL KLPNDF ;RELOAD AND START THE PORT
RET
SUBTTL DDMP - INITIATE PAGE MOVEMENT TO DISK IF APPROPRIATE
DDMP0: TSTMS0 ;BE SURE NO SECTION 0
SETZM P1 ;Not doing CFS-forced DDMP
DDMP00: MOVE T1,TODCLK ;GET THE CURRENT TIME
ADD T1,DDPPER ;CALCULATE NEXT ALARM TIME
MOVEM T1,DDPTIM ;AND SAVE IT FOR THE SCHED TO CHECK
SETZM DDPDUE ;RESET THE OVERDUE COUNTER
MOVE T1,DRMFRE ;DRUM SPACE LOW?
CAMGE T1,DRMIN0
JRST [ TMSG <DDMP: SWAP SPACE LOW ACTION.
>
JRST DDMPA]
DDMPA: IFE. P1 ;Check which flavor we are doing
CALL DDMP ;DO THE WORK
NOP
ELSE.
CALL DDMPF ;DO force out
AOS DDCFSF
ENDIF.
IFE. P1 ;If this was a regular run
MOVX A,^D60000 ;SET TIME FOR NEXT CYCLE AS 1 MINUTE
ADD A,TODCLK ;When to do it again
MOVEM A,DDTIME
ENDIF.
IFN <FTKLIPA>,<CALL SC.ALM> ;Check on SCA buffering
SETZM P1
SKIPE DDCFSF ;Need another force?
IFNSK. ;If so
MOVEI T1,^D50 ;Wait a short while
DISMS ;""
ELSE.
MOVEI A,DDPWAT ;The test
HDISMS ;Wait a bit
ENDIF.
EXCH P1,DDCFSF ;Zero the word, get new value for flag
JRST DDMP00 ;And do it again
;Here when DDMP fork gets an error
DDMPER: BUG.(CHK,DDMINT,MEXEC,SOFT,<UNEXPECTED INTERRUPT IN DDMP PROCESS>,<<ITFPC,ITFPC>,<LSTERR,LSTERR>>,<
Cause: An unexpected error has occurred in the process which handles
migration of pages to disk. The error handler will attempt
to reinitialize the context and resume processing. The
stack may be examined for an indication of where the error
occurred.
Data: 1. PC when error occurred.
2. Last error code in fork.
>)
SETZM NSKED ;BE OKSKED
SETZM CRSKED ;BE NOT 'CRITICAL SECTION'
MOVX CX,USRCTX
MOVEM CX,FFL
MCENTR ;RESET STACK, REINIT CONTEXT
MOVE T1,FORKX ;T1/ FORK NUMBER
SETZM T2 ;T2/ ALL INTERRUPT LEVELS
CALL JSBSTF ;CLEAN THE JSB STACK
JRST DDMP0 ;RESUME
;DDMP variant used at system start-up to avoid SCA hangs. This routine exists
;solely to call SC.ALM when needed during start-up. Once the DDMP fork and
;the CHKR fork split off, this code is no longer needed.
TERUN: MOVX T1,USRCTX ;Start with user context set
MOVEM T1,FFL ;. . .
MCENTR ;Start a new process
TELOOP: SETZM DDCFSF ;No longer requesting this
CALL SC.ALM ;Do buffer checking now
MOVEI T1,TEWAIT ;The wait test
MDISMS ;Wait up
JRST TELOOP ;And do it agaain
; ROUTINE TO REQUEST SETSPD FOR MAGTAPE ON LINE
MTASSP: SETZM MTAJB0 ;CLEAR REQUEST FLAG
MOVX T1,GJ%OLD!GJ%PHY!GJ%SHT
HRROI T2,SETSPD ;GET POINTER TO "SYSTEM:X-SETSPD.EXE"
MOVEI T3,4 ;START AT ENTRY VECTOR POSITION 4
SETZM T4 ;DO NOT RECORD FORK NUMBER
CALL RUNDII ;RUN SETSPD AND WAIT UNTIL IT'S DONE
JFCL ;IGNORE FAILURE
RET
;ROUTINE CALLED BY CHKR TO SEE IF ANY ACTION NEEDED FOR THE
;MOS MEMORY DIAGNOSTIC
CHKMOS: SKIPN T1,MOSFRK ;NOW RUNNING?
JRST CHKMO1 ;NO. SEE IF WE SHOULD RUN IT
RFSTS ;YES. SEE WHAT IT IS DOING
LOAD T1,RF%STS,T1 ;GET ITS STATUS
CAIE T1,.RFHLT ;HALTED?
CAIN T1,.RFFPT ;OR ERROR?
SKIPA T1,MOSFRK ;YES.
RET ;NO. ALL DONE THEN
KFORK ;KILL THE PROCESS
SETZM MOSFRK ;NO MORE FORK HERE
CALL MOSULE ;UNLATCH CONTROLLER NOW
;HERE IF NO FORK NOW RUNNING. SEE IF ONE NEEDED
CHKMO1: SKIPE ERRTBL ;HAVE SOME ENTRIES TO PROCESS
CALL RUNMOS ;YES. START THE DIAG
RET ;DONE
;ROUTINE TO RUN THE MOS MEM DIAGNOSTIC
RUNMOS: TDZA T3,T3 ;MAIN ENTRY POINT
RUNMO1: MOVEI T3,1 ;SYS START UP ENTRY
MOVX T1,<GJ%OLD!GJ%SHT!GJ%PHY>
HRROI T2,[ASCIZ /SYSTEM:TGHA.EXE/] ;THE DIAG
SETZM T4 ;DO NOT RECORD FORK NUMBER
CALL RUNDIR ;RUN TGHA
RET ;DIDN'T DO IT.
MOVEM T1,MOSFRK ;SAVE FORK HANDLE FOR LATER
RET ;AND DONE
SUBTTL
;ROUTINE CALLED BY JOB 0 TO FINISH LOADING UP SYSERR BLOCK
; FOR BUGHLT'S AND BUGCHK'S
;ACCEPTS IN T1/ ADDRESS OF SYSERR BLOCK
;RETURNS +1: ALWAYS
LOGBUG::SAVEAC <Q1,Q2,P1>
TRVAR <BUGSP,BUGPNM,BUGTAD,<LOGBUF,^D70>,<QBLK,4>>
MOVEM T1,Q1 ;SAVE POINTER TO SYSERR BLOCK
HRROI T1,LOGBUF ;POINTER TO BLOCK
SKIPN SAVTRE ;SAVING TREES?
IFSKP.
CALL SLOGTM ;YES, OUTPUT THE TIME
FMSG < ***BUG>
CALL LOGNAM ;OUTPUT THE BUG NAME
FMSG <*** >
ELSE.
FMSG <
********************
*BUG>
CALL LOGNAM ;OUTPUT THE BUG NAME
CALL RLOGTM ;OUTPUT THE DATE AND TIME
FMSG <
*>
ENDIF.
SETZB T2,BUGSP ;CLEAR POINTERS
IFN FTNSPSRV,< ;[6.0]
MOVE Q2,BUGTP ;ADDRESS OF BUG POINTERS
MOVE P1,BUGTL ;LENGTH OF TABLE
DO.
SOJL P1,[HRROI T2,[ASCIZ/Message not found for this address/]
JRST ENDLP.]
MOVE T4,0(Q2) ;SEARCH FOR ADDRESS IN TABLE
HLRZ T2,T4 ;GET ADDRESS
HRRZ T3,SEBDAT+BG%ADR(Q1) ;Get BUGHLT address
CAME T2,T3 ;Found it?
AOJA Q2,TOP. ;NO, STEP POINTER AND LOOP
HRRZ T2,T4 ;GET POINTER TO MESSAGE STRING
HLL T2,Q2 ;INCLUDE SECTION NUMBER
MOVEM T2,BUGSP ;SAVE IT FOR SYSERR BLOCK
>
IFE FTNSPSRV,< ;[6.1]
MOVE Q2,BUGTP ;ADDRESS OF BUG POINTERS
MOVE P1,BUGTL ;LENGTH OF TABLE
MOVE T4,SEBDAT+BG%ADR(Q1) ;Get PC of BUG
TLNN T4,-1 ;Skip if not section 0
HRLI T4,MSEC1 ; otherwise load section 1 for compare
DO.
SOJL P1,[HRROI T2,[ASCIZ/Message not found for this address/]
JRST ENDLP.]
CAMN T4,0(Q2) ;Compare with BUG in BGPTR
IFSKP. ; -not the one,
ADDI Q2,2 ; Move to next entry
LOOP. ; and go back to try next
ENDIF.
MOVE T2,1(Q2) ;Get BGSTR pointer
MOVEM T2,BUGSP ;SAVE IT FOR SYSERR BLOCK
>
TXO T2,<.P07> ;MAKE OWGBP
ENDDO.
SETZ T3, ;Set up for SOUT
SOUT ;TYPE OUT STRING
SETZM BUGPNM ;START WITH A NULL PROGRAM NAME
SKIPGE SEBDAT+BG%JOB(Q1) ;IS THERE A JOB?
JRST LOGBF5 ;NO, SKIP JOB/USER LINE
SKIPN SAVTRE ;SAVING TREES?
IFSKP.
FMSG < Job: > ;YES
ELSE.
FMSG <
*Job: >
ENDIF.
HRRZ T2,SEBDAT+BG%JOB(Q1) ;GET JOB NUMBER
MOVEI T3,12 ;TYPE IT IN DECIMAL
NOUT
ERJMP .+1
MOVE T2,JOBPNM(T2) ;GET PROGRAM NAME
MOVEM T2,BUGPNM ;SAVE NAME OF PROGRAM
FMSG <, User: >
HRRZ T2,SEBDAT+BG%USR(Q1) ;GET USER LOGGED IN DIR NUMBER
HRLI T2,USRLH ;TURN IT INTO PROPER FORMAT USER NUMBER
DIRST ;TYPE OUT USER NAME
ERJMPS .+1 ;IGNORE ERROR, PRESERVE PTR IN T1
LOGBF5: SKIPG Q2,SEBDAT+BG%RCT(Q1) ;GET COUNT OF REGISTERS SAVED
JRST LOGBF7 ;NO REGISTERS TO BE TYPED
SKIPN SAVTRE ;SAVING TREES?
IFSKP.
FMSG < Additional Data: > ;YES
ELSE.
FMSG <
*Additional data: >
ENDIF.
XMOVEI T4,SEBDAT+BG%REG(Q1) ;GET POINTER TO REGISTER AREA
LOGBF6: MOVE T3,[NO%MAG+10] ;TYPE THEM IN UNSIGNED OCTAL
MOVE T2,0(T4) ;GET NEXT REG TO TYPE
NOUT
ERJMP .+1
SOJLE Q2,LOGBF7 ;DONE?
FMSG <, > ;NO
AOJA T4,LOGBF6 ;GO TYPE OUT REST
LOGBF7: SKIPN SAVTRE ;SAVING TREES?
IFSKP.
FMSG <
>
ELSE.
FMSG <
********************
>
ENDIF.
SETZ T2,
IDPB T2,T1 ;TIE IT OFF
MOVEI T2,LOGBUF
MOVE T4,SEBDAT+BG%FLG(Q1) ;GET TYPE OF BUG
MOVEI T3,.QBCHK ;BUGCHK BY DEFAULT (BUGHLTS DON'T MAKE IT)
CAIN T4,BG%CHK ;BUGCHK?
MOVEI T3,.QBCHK ;YES, .QBDTY VALUE FOR BUGCHK
CAIN T4,BG%INF ;INFORMATIONAL BUG CHECK?
MOVEI T3,.QBINF ;YES, .QBDTY VALUE FOR BUGINF
CALL WROPR0 ;SEND IT
MOVE T1,CRSTD1 ;GET DATE OF BUGCHK
CAMN T1,[-1] ;IS THERE ONE SET?
CALL LGTAD ;NO, SEE IF IT IS SET NOW
MOVEM T1,BUGTAD ;SAVE DATE AND TIME OF BUGCHK
MOVE T1,Q1 ;GO COPY REST OF DATA TO BLOCK
MOVE T2,[-NBUGET,,BUGET]
CALL SEBCPY
JFCL
SOS BUGCNT ;COUNT DOWN THE QUEUED UP BLOCK COUNT
SETZM BUGCHK ;CLEAR OUT LAST BUGCHK ADR
RET ;FINISHED
BUGET: SEBPTR BG%SVN,SBTSTR,SVN ;SYSTEM NAME
SEBPTR BG%PNM,SBTWD,BUGPNM ;PROGRAM NAME
SEBPTR BG%DAT,SBTWD,BUGTAD ;TIME AND DATE OF CRASH
SEBPTR BG%MSG,SBTSTR,@BUGSP ;BUG MESSAGE
NBUGET==.-BUGET
;LOCAL ROUTINE TO OUTPUT THE TIME
;RETURNS: +1
RLOGTM: FMSG <" at >
SKIPA
SLOGTM: MOVX T3,OT%NDA ;NO DATE, JUST THE TIME
MOVE T2,SEBDAT+BG%DAT(Q1) ;GET TIME AND DATE OF BUG CHECK
ODTIM ;TYPE OUT TIME AND DATE
ERJMP .+1
RET
;LOCAL ROUTINE TO OUTPUT THE BUGXXX TYPE AND NAME
;RETURNS: +1
LOGNAM: MOVE T4,SEBDAT+BG%FLG(Q1) ;GET TYPE OF BUG CHECK
HRROI T2,[ASCIZ/HLT /]
CAIN T4,BG%CHK ;BUGCHK?
HRROI T2,[ASCIZ/CHK /] ;YES
CAIN T4,BG%INF ;INFORMATIONAL BUG CHECK?
HRROI T2,[ASCIZ/INF /] ;YES
SOUT
ERJMP .+1
SKIPE SAVTRE ;SAVING TREES?
IFSKP.
FMSG <"> ;NO
ENDIF.
MOVE T4,[POINT 6,SEBDAT+BG%NAM(Q1)]
LOGNA1: ILDB T2,T4 ;NOW TYPE OUT 6 CHAR NAME
JUMPE T2,R ;IF AT END, STOP TYPING
ADDI T2," " ;TRANSLATE SIXBIT TO ASCII
IDPB T2,T1 ;STORE IT
TLNE T4,770000 ;AT END OF NAME YET?
JRST LOGNA1 ;NO, LOOP BACK FOR REST OF CHARS
RET
;Routine to write message to operator. Uses ORION if it can
; T1/ count of words in string
; T2/ string address
; T3/ .QBDTY value (.QBCHK,.QBINF,.QBSYS)
; CALL WROPER
; or
; T1/ ending bp
; T2/ buffer address
; T3/ .QBDTY value (.QBCHK,.QBINF,.QBSYS)
; CALL WROPR0
; Returns +1 always
;Clobbers all temps
;Format of the QBLK STKVAR storage:
;
; QBLK/ Function and flags ;.QUFNC
; +1/ Response block (not used) ;.QURSP
; +2/ QA%IMM!<Length=1>!.QBDTY ;.QUARG+.QATYP (DISPLAY TYPE)
; +3/ .QBCHK,.QBINF,or .QBSYS ;.QUARG+.QADAT
; +4/ <Length>,,.QBMSG ;.QUARG+.QATYP+2 (MESSAGE BLOCK)
; +5/ ADDR OF STRING ;.QUARG+.QADAT+2
QLNG==6
WROPR0::HRRZS T1 ;GET ADDRESS
SUBI T1,-1(T2) ;COMPUTE WORDS
WROPER::STKVAR<<QBLK,QLNG>>
MOVEI T4,QBLK ;POINT AT OUR BLOCK
MOVEM T2,.QUARG+.QADAT+2(T4) ;STORE STRING
MOVEM T3,.QUARG+.QADAT(T4) ;STORE MESSAGE TYPE
HRLI T1,.QBMSG ;SUBFUNCTION ARG
MOVSM T1,.QUARG+.QATYP+2(T4) ;STASH SUBFUNC STUFF
MOVX T3,<QU%NRS!.QUWTO> ;NO RESPONSE FOR WRITE TO OPERATOR
MOVEM T3,.QUFNC(T4) ;SAVE THE FUNCTION AND FLAGS
MOVX T3,<QA%IMM!<FLD(1,QA%LEN)>!<FLD(.QBDTY,QA%TYP)>>
MOVEM T3,.QUARG+.QATYP(T4) ;SAVE THE DISPLAY TYPE, LENGTH, FLAGS
SETZM .QURSP(T4) ;NO RESPONSE BLOCK
MOVEI T1,QLNG ;LENGTH OF ARG BLOCK
MOVEI T2,QBLK ;POINT AT ARG BLOCK
QUEUE% ;DO IT
ERJMP WROPE0 ;IF FAILED, PUT ON THE CTY
JE SF%BGS,FACTSW,R ;CHECK IF WANT BOTH
WROPE0: HRRO T1,.QUARG+.QADAT+2(T4) ;GET POINTER TO STRING
PSOUT ;SO DO IT
RET ;DONE
;SEND TEXT TO ALL LINES, WAIT FOR COMPLETION
; 2/ PTR TO ASCIZ MESSAGE
; CALL ALLMSG
; RETURN +1 ALWAYS, WAIT LONG ENOUGH FOR MESSAGE TO APPEAR ON 110 BAUD
;LINES.
ALLMSG::SETZ 1, ;SAY NO WAIT
REPEAT 0,<
HLRZ 3,2 ;CHECK LH OF POINTER
CAIN 3,-1 ;DEFAULT?
HRLI 2,(<POINT 7,0>) ;YES, DO IT
>
SETO T3, ;SAY ALL LINE
TTMSG ;TYPE THE STUFF
ERJMP [BUG.(INF,TTFSMS,MEXEC,SOFT,<Failed to send system message>,,<
Cause: Most likely reason for failure is that RSX20F
cannot complete the previous TTMSG request. Typically this
is caused by a hung DH11 line, but could be a software bug
as well.
>)
JRST .+1] ;CONTINUE
RET ; AND RETURN
CHKDRM: REPEAT 0,<
TMSG <
*****DRUM ERR: >
MOVSI 6,-NDRMEW ;# OF DRUM ERROR WORDS
HRRI 6,DRMCFE ;FINISH AOBJN PTR
CHKD1: MOVE B,0(6) ;GET WORD
CALL TTOCTP ;PRINT IT
TMSG <
>
AOBJN 6,CHKD1
> ;REPEAT 0
SETOM DRMJ0R ;RESET REQUEST FLAG
RET ;RETURN
CHKDMS: MOVE 1,DRMFRE
CAMLE 1,DRMIN0 ;DRUM SPACE LOW?
RET ;NO
STKVAR <<MSGBBF,^D70>>
HRROI 2,[ASCIZ /
[Caution--Swapping space low]
/]
MOVX T3,SF%MS0
TDNE T3,FACTSW ;WANT LEVEL 0 MESSAGES?
CALL ALLMSG ;YES, DO IT
HRROI T1,MSGBBF ;WHERE IT'S GOING
HRROI T2,[ASCIZ /
*****Swapping space low, /]
SETZM T3
SOUT ;COPY IT
MOVE 2,DRMFRE
CALL CHKH1 ;DO MORE
MOVEI T2,MSGBBF
MOVEI T3,.QBSYS ;.QBDTY VALUE FOR SYSTEM MESSAGE
CALLRET WROPR0 ;DO IT
ENDSV.
CHKSPT: MOVE 1,SPTC
CAMGE 1,SPC1 ;SPT LOW?
RET ;NO
STKVAR <<MSGBBF,^D70>>
HRROI 2,[ASCIZ /
[Caution--SPT space low]
/]
MOVE T3,FACTSW
TXNE T3,SF%MS0 ;WANT LEVEL 0 MESSAGES?
CALL ALLMSG ;YES, DO IT
HRROI T1,MSGBBF
HRROI T2,[ASCIZ /
*****SPT space low, /]
SETZM T3
SOUT ;COPY STRING
MOVN 2,[NOFN-SSPT]
SUB 2,SPTC ;SPACE LEFT
CALL CHKH1 ;DO REST OF MESSAGE
MOVEI T2,MSGBBF ;GET START
MOVEI T3,.QBSYS ;.QBDTY VALUE FOR SYSTEM MESSAGE
CALLRET WROPR0 ;AND WRITE IT
ENDSV.
;CHECK DSK SPACE
CHKDKS: SKIPGE T1,EXPFRK ;EXPUNGE FORK RUNNING?
RET ;YES - EXIT QUIETLY
JUMPE T1,CKDKS1 ;NO - EXISTS?
SETZM EXPFRK ;YES - KILL IT
KFORK ;...
CKDKS1: SETZM T1 ;ASSUME PUBLIC STRUCTURE
CALL GSTRPG ;GET COUNT OF USED AND FREE PAGES ON STRUCTURE
MOVE T1,T2 ;GET FREE COUNT
SUB 1,SYSSPC ;LESS 'BUFFER'
CAILE 1,SYWRND ;LOW?
RET ;NO
STKVAR <<MSGBBF,^D70>,SAVSIZ>
MOVEM T2,SAVSIZ
HRROI 2,[ASCIZ /
[Caution--Disk space low on system structure]
/]
MOVE T3,FACTSW
TXNE T3,SF%MS0 ;WANT LEVEL 0 MESSAGES?
CALL ALLMSG ;YES, DO IT
SKIPN T1,EXPTIM ;ENOUGH TIME SINCE LAST EXPUNGE?
MOVX T1,<EXWTIM*^D60000> ;DONT DO EXPUNGES IN FIRST n MIN
CAMG T1,TODCLK
CALL EXPALL ;YES, DO EXPUNGE *
HRROI T1,MSGBBF ;ADDRESS OF BUFFER
HRROI T2,[ASCIZ /
*****Disk space low on system structure, /]
SETZM T3
SOUT
MOVE T2,SAVSIZ ;RECOVER FREE SPACE
CALL CHKH1
MOVEI T2,MSGBBF ;START OF MESSAGE
MOVEI T3,.QBSYS ;.QBDTY VALUE FOR SYSTEM MESSAGE
CALLRET WROPR0 ;DO IT
;ROUTINE TO DO EXPUNGE * WHEN DISK SPACE LOW
;START FORK AND MARK IT RUNNING
; CALL EXPALL
;RETURNS +1 ALWAYS
NR EXPTIM,1 ;TIME OF LAST EXPUNGE PLUS MIN INTERVAL
NR EXPFRK,1 ; 0 := NO EXPUNGE FORK
; -1,,FRKH := FORK RUNNING
; 0,,FRKH := EXPUNGE DONE
EXPALL: MOVX T1,CR%CAP ;PASS CAPABILITIES DOWN
CFORK ;CREATE FORK
BUG.(HLT,EXPAFK,MEXEC,soft,<EXPALL: JOB 0 CFORK FAILED>,,<
Cause: This will happen if the CFORK JSYS fails to create a fork
for doing the system-wide expunge of structure PS:.
This could most likely happen if all the fork slots are used up.
>)
HRROM T1,EXPFRK ;MARK FORK RUNNING
MOVE T2,[MSEC1,,EXPAL0] ;START INFERIOR
MSFRK ; IN MONITOR MODE
RET ;RETURN (WAIT TILL DONE)
;EXPUNGE FORK STARTS HERE
EXPAL0: MOVX T1,USRCTX ;SET FUNNY JSYS CONTEXT
MOVEM T1,FFL
SETZM FPC ;SET PC
MCENTR
CALL EXPAL1 ;AWAY WE GO
HRRZS EXPFRK ;SAY WE ARE DONE
HALTF ;AND STOP
EXPAL1: MOVX T2,SF%CDE!SF%BTE
TDNE T2,FACTSW ;ANY BIT TABLE ERRORS?
RET ;YES. DON'T EXPUNGE
HRROI T2,[ASCIZ /
[Deleted files will be expunged from system structure in 30 seconds]
/]
MOVE T3,FACTSW
TXNE T3,SF%MS1 ;WANT LEVEL 1 MESSAGES?
CALL ALLMSG
MOVEI T1,^D30000
DISMS ;GIVE USERS TIME TO UNDELETE
MOVX T1,RC%AWL ;ALLOW WILD CARDS
HRROI T2,[ASCIZ "PS:<*>"]
RCDIR ;GET FIRST DIRECTORY NUMBER
ERJMP [BUG.(CHK,EXPRCD,MEXEC,HARD,<EXPALL: RCDIR FAILURE>,,<
Cause: This BUG is not documented yet.
Action:
>)
JRST EXPAL3] ;WE TRIED
EXPAL2: SETZ T1, ;NOTHING SPECIAL
MOVE T2,T3 ;PUT DIRECTORY NUMBER IN RIGHT PLACE
DELDF ;EXPUNGE
ERJMP .+1 ;IGNORE FAILURES
MOVX T1,RC%STP!RC%AWL ;STEP TO NEXT
MOVE T3,T2 ;WHERE WE LEFT OFF
HRROI T2,[ASCIZ "PS:<*>"] ;WHERE WE STARTED
RCDIR ;...
ERJMP EXPAL3 ;QUIT ON FAILURE
TXNN T1,RC%NMD ;DONE?
JRST EXPAL2 ;NO - KEEP GOING
EXPAL3: MOVX T1,<EXWTIM*^D60000> ;DONE, SET NEXT POSSIBLE TIME
ADD T1,TODCLK
MOVEM T1,EXPTIM
HRROI T2,[ASCIZ /
[System structure expunge completed]
/]
MOVE T3,FACTSW
TXNE T3,SF%MS1 ;WANT LEVEL 1 MESSAGES?
CALL ALLMSG ;NOTIFY USERS
RET ;DONE
CHKDSK: RET ;NOP
CHKDE1: RET ;NOP
;UTILITY NUMBER PRINTERS
;DECIMAL PRINT FOR LESS THAN 18 BIT NUMBERS
;OCTAL PRINT FOR MORE THAN 18 BIT NUMBERS DOES DDT HALFWORD FORMAT.
;A/ BYTE POINTER, IF TTDECP CALLED
;B/ NUMBER TO PRINT
; CALL TTXXXP ;XXX=(DEC,OCT)
;NUMBER PRINTED TO PRIMARY OUTPUT
TTDECP: SKIPA C,[^D10] ;DECIMAL
TTOCTP: MOVEI C,^D8 ;IN OCTAL
TLNN B,-1 ;LH NON-0?
JRST TTOCT1 ;NO, SIMPLE PRINT
PUSH P,B ;SAVE DATA
HLRZ B,B ;PRINT LH
NOUT
JFCL
MOVEI B,"," ;PRINT ,,
IDPB B,A
IDPB B,A
POP P,B ;RECOVER DATA
HRRZ B,B
TTOCT1: NOUT ;PRINT RH
JFCL
RET
;ANY INTERRUPT WILL EVENTUALLY TRAP TO HERE
CHKRI: BUG.(CHK,JB0CSH,MEXEC,SOFT,<JOB 0 CRASH>,<<ITFPC,PC>,<LSTERR,LSTERR>>,<
Cause: An unexpected interrupt has occurred in the job 0 fork which
check system status. The context will be reinitialized, and
the process restarted. The stack may be examined to determine
the situation which caused the error.
Data: 1. PC at which error occurred.
2. Last error code for this fork.
>)
SETZM NSKED ;BE OKSKED
SETZM CRSKED ;BE NOT 'CRITICAL SECTION'
MOVX CX,USRCTX
MOVEM CX,FFL
MCENTR ;REINIT CONTEXT
SETZM PSIBW
JRST CHKR
NR CHKDRE,1 ;COUNT OF REC. ERRORS AT LAST REPORT
NR CHKDNE,1 ; "" NON-REC. ""
NR CHKDMC,1
;CHKBGS - CHECK IF TIME TO STORE NEW ASCII TIME AND DATE FOR TYPEOUT
; AT BUGHLT TIME
;
;RETURNS: +1, ALWAYS
CHKBGS: MOVE T1,TODCLK ;GET CURRENT DATE AND TIME
CAML T1,BUGTMS ;TIME TO STORE ASCII STRING?
SKIPGE TADIDT ;HAS TIME BEEN SET
RET ;NO, NOT YET
MOVX T2,<BUGINT> ;GET TIME INTERVAL FOR STORING STRING
ADD T1,T2 ;GET NEXT TIME FOR STORING STRING
MOVEM T1,BUGTMS ;STORE
MOVE T1,[POINT 7,BUGTIM] ;GET BYTE POINTER FOR STORING TIME
MOVNI T2,1 ;GET CURRENT TIME AND DATE
SETZ T3, ; IN DEFAULT FORMAT
ODTIM
MOVE T2,"/" ;STORE DELIMITER FOR BUGMSG ROUTINE
IDPB T2,T1
RET
;ROUTINE TO FINISH LOGGING OF PARITY ERROR - RUN IN JOB 0 CONTEXT
; T1/ ADDRESS OF SYSERR BLOCK
PFCPJ0::SAVEQ
HLRZ FX,SEBDAT+PT%JOB(T1) ;GET FORKX AT TRAP
CAIE FX,-1
SKIPGE FKPT(FX)
RET ;IN SCHED OR FORK KILLED, NO DATA
LOAD T2,FKJBN ;GET JOB NUMBER
HRRM T2,SEBDAT+PT%JOB(T1) ;REPORT IT
HRRZ T3,JOBDIR(T2) ;GET LOGGED-IN DIRECTORY
HRLI T3,USRLH ;MAKE IT A USER NUMBER
MOVEM T3,SEBDAT+PT%USR(T1) ;REPORT IT
MOVE T3,JOBPNM(T2) ;GET PROGRAM NAME
MOVEM T3,SEBDAT+PT%PGM(T1) ;REPORT IT
RET
;THE CHKAC JSYS - CHECK THE ACCESSABILITY OF A FILE OR DIRECTORY
;ACCEPTS IN 1/ COUNT OF ARGUMENTS
; 2/ LOCATION OF ARGUMENT BLOCK
; CHKAC
;RETURNS +1: ERROR - ERROR CODE IN AC 1
; +2: AC 1 = 0 ACCESS NOT ALLOWED
; AC 1 = -1 ACCESS IS ALLOWED
;ARGUMENT BLOCK:
; .CKAAC DESIRED ACCESS CODE
; .CKALD LOGGED IN USER NUMBER OF THE USER DOING THE ACCESSING
; .CKACD CONNECTED STRUCTURE,,DIRECTORY OR POINTER TO STRUCTURE/
; DIRECTORY STRING
; .CKAEC ENABLED CAPABILITIES OF THE USER
; .CKAUD STRUCTURE,,DIRECTORY OR POINTER TO STRUCTURE/DIRECTORY STRING
; FOR FILE BEING ACCESSED
; IF CK%JFN IS SET IN AC1, THIS IS JFN FOR FILE
; .CKAPR PROTECTION OF FILE BEING ACCESSED
.CHKAC::MCENT ;ENTER JSYS
STKVAR <<SVT3T4,2>>
UMOVE Q1,2 ;GET LOCATION OF ARGUMENT BLOCK
XCTU [HRRZ T1,1] ;GET LENGTH OF ARGUMENT BLOCK
XCTU [HLL Q1,1] ;GET THE FLAGS
TXNN Q1,CK%JFN ;SPECIFIING A JFN?
CAILE T1,.CKAPR ;NO, MUST INCLUDE PROTECTION
CAIGE T1,.CKAPR ;YES, PROTECTION NOT NEEDED
RETERR (CKAX1) ;LENGTH IS TOO SHORT
XCTU [MOVE T1,.CKAEC(Q1)] ;LENGTH IS OK, GET CAPABILITIES
TRNE T1,SC%WHL!SC%OPR ;IS THIS USER A WHEEL?
JRST CHKACT ;YES, ACCESS IS LEGAL ALWAYS
XCTU [HRRZ P1,.CKAAC(Q1)] ;GET ACCESS CODE
UMOVE T1,.CKAUD(Q1) ;GET THE JFN OR DIRECTORY DESIGNATOR
TXNE Q1,CK%JFN ;IS USER GIVING A JFN?
JRST CHKAC2 ;YES
CALL CNVSTD ;CONVERT TO A DIRECTORY NUMBER
RETERR () ;ILLEGAL FORMAT OF STRING
CHKAC2: MOVE P2,T1 ;SAVE JFN OR DIR NUMBER IN P2
UMOVE T1,.CKALD(Q1) ;GET THE LOGGED IN USER NUMBER
LOAD T2,NMFLG,T1 ;GET BITS 0-2
CAIN T2,NUMVAL ;IS THIS A NUMBER?
JRST CHKAC3 ;YES, DONT NEED TO CONVERT THE STRING
CALL CNVSTU ;CONVERT STRING TO USER NUMBER
RETERR () ;FAILED
CHKAC3: CALL CNVDIR ;CONVERT IT TO A DIR NUMBER
MOVE P3,T1 ;SAVE DIRECTORY # IN P3
UMOVE T1,.CKACD(Q1) ;GET CONNECTED DIR # INTO P4
CALL CNVSTD ;GET DIR NUMBER FROM STRING
SETZ T1, ;FAILED TO GET A DIRECTORY NUMBER
MOVE P4,T1 ;SAVE DIR NUMBER FOR LATER
TXNN Q1,CK%JFN ;GIVING A JFN?
XCTU [HRLZ P5,.CKAPR(Q1)] ;NO, GET PROTECTION
TXNE Q1,CK%JFN ;USER GIVING A JFN?
JRST [ HRRZ T1,P2 ;YES, GET IT
CALL GETFPD ;GET PROT AND DIR #
RETERR (CKAX4) ;BAD JFN
MOVE P2,T1 ;SAVE DIR #
HRLZ P5,T2 ;SAVE PROTECTION
JRST .+1]
MOVE T1,P2 ;MAP IN DIRECTORY OF FILE
CALL SETDIR ;FIRST CHECK LEGALITY OF DIR #
RETERR (CKAX2) ;ILLEGAL DIR #
ULKDIR ;UNLOCK DIR, BUT STAY NOINT
CAIL P1,.CKADR ;IS THIS A DIRECTORY ACCESS CHECK?
JRST CHKDIR ;YES, GO SET UP DIR PROTECTION VALUE
MOVEI T4,<DP%RD>B35 ;MUST ALSO CHECK READ ACCESS TO DIR
CHKAC0: MOVSI Q2,40 ;SET UP MASK WORD
MOVN T1,P1 ;GET CODE
LSH Q2,0(T1) ;FORM THE ACCESS CHECK MASK
TDNE Q2,P5 ;IS THIS MODE ALLOWED FOR WORLD?
JRST [ MOVE T1,DIRORA ;YES, NOW SEE IF LEGAL TO REF DIR
LOAD T1,DRPRT,(T1) ;GET DIRECTORY PROTECTION
TDNE T4,T1 ;LEGAL TO REFERENCE IT?
JRST CHKACT ;YES, THIS IS LEGAL THEN
JRST .+1] ;NO, GO SEE IF THIS IS OWNER OR GROUP
HLLZ T1,P5 ;MAKE OWNER SUPERSET OF GROUP
LSH T1,6
IORM T1,P5 ;DONT ALLOW GROUP MORE PRIVS THAN OWNER
LSH Q2,^D12 ;NOW SEE IF LEGAL FOR OWNER
LSH T4,^D12 ;DO SAME FOR DIR PROTECTION MASK
MOVE T3,DIRORA ;GET BASE ADR OF MAPPED DIR
LOAD T3,DRPRT,(T3) ;GET DIR PROTECTION
MOVE T2,T3
LSH T2,6 ;MAKE OWNER SUPERSET OF GROUP
IORM T2,T3 ;T3 = DIR PROTECTION
TDNE T4,T3 ;LEGAL ACCESS FOR OWNER IN DIRECTORY?
TDNN Q2,P5 ;YES, IS FILE ACCESS LEGAL?
JRST CHKACF ;IF NOT LEGAL FOR OWNER, THEN FALSE
CAME P3,P2 ;IS THIS FILE IN SAME DIR AS USER?
CAMN P4,P2 ;EITHER LOGGED IN OR CONNECTED
JRST CHKACT ;YES, RETURN TRUE
DMOVEM T3,SVT3T4 ;SAVE T3 AND T4
SETZ P4, ;FLAG FOR DIFFERENT STRUCTURES
HLRZ T1,P2 ;GET STRUCTURE TO ACCESS
HLRZ T2,P3 ;GET LOGGED IN STRUCTURE UNIQUE CODE
CAMN T1,T2 ;ARE THEY THE SAME?
JRST CHKAC4 ;YES, FORGET DOMESTIC STR TEST
HLRZ T1,P2 ;GET STRUCTURE UNIQUE CODE
CALL CNVSTR ;GET STRUCTURE NUMBER
RETERR () ;COULDN'T FIND STRUCTURE
MOVE T2,T1 ;SAVE STRUCTURE NUMBER
CALL ULKSTR ;UNLOCK STRUCTURE FROM CNVSTR
MOVE T2,STRTAB(T2) ;GET STRUCTURE DATA BLOCK ADDRESS
MOVE T1,SDBSTS(T1) ;GET STATUS OF STRUCTURE
TXNN T1,MS%DOM ;IS IT DOMESTIC?
JRST CHKACF ;NO, RETURN FALSE
MOVEI T2,MAXLW+1 ;GET SOME JSB FREE SPACE
CALL ASGJFR ; IN WHICH TO STORE USER NAME
RETERR (SACTX2) ;INSUFFICIENT RESOURCES
MOVE P4,T1 ;STORE FREE SPACE BLOCK ADDRESS
AOS T1 ;DON'T STEP ON HEADER
HRLI T1,-1 ;MAKE IT A POINTER
MOVE T2,P3 ;GET LOGGED IN DIRECTORY
HRLI T2,USRLH ;MAKE IT A USER NUMBER
DIRST ;GET USER NAME
JRST [ MOVEI T1,JSBFRE ;RELEASE FREE SPACE
MOVE T2,P4
CALL RELFRE
RETERR ()]
MOVE T1,P4 ;GET ADDRESS OF NAME
HLRZ T2,P2 ;GET STUCTURE UNIQUE CODE
CALL DIRLKX ;DOES USER HAVE A DIRECTORY ON THIS STR?
JRST [ MOVEI T1,JSBFRE ;NO DIRECTORY ON THAT STRUCTURE
MOVE T2,P4 ;RELEASE FREE SPACE
CALL RELFRE
JRST CHKACF] ;RETURN FALSE
MOVE T2,P4 ;GET ADDRESS OF JSB SPACE
MOVE P4,T1 ;STORE DIRECTORY NUMBER
MOVEI T1,JSBFRE
CALL RELFRE ;RETURN JSB SPACE
HLL P4,P2 ;ADD STR UNIQUE CODE TO DIR NUMBER
CAMN P2,P4 ;TRYING TO ACCESS OUR OWN DIRECTORY?
JRST CHKACT ;YES, RETURN SUCCESS
MOVE T1,P2 ;MAP IN DESIRED DIRECTORY AGAIN
CALL SETDIR
RETERR ()
ULKDIR ;UNLOCK DIRECTORY
CHKAC4: DMOVE T3,SVT3T4 ;RESTORE T3 AND T4
LSH Q2,-6 ;NO, NOW SEE IF THIS IS SAME GROUP
LSH T4,-6 ;SAME FOR GROUP
TDNE T4,T3 ;LEGAL ACCESS TO DIR BY GROUPS?
TDNN Q2,P5 ;YES, LEGAL FOR GROUP?
JRST CHKACF ;NO, RETURN FALSE
CALL CPYDGP ;COPY DIR GROUPS INTO JSB
JRST CHKACF ;NO GROUPS
MOVE P6,T1 ;SAVE THE JSB POINTER
SKIPN T1,P4 ;TRYING TO ACCESS DIR ON PRIMARY STRUCTURE?
MOVE T1,P3 ;YES, GET LOGGED IN DIRECTORY
CALL SETDIR ;GET INFO ABOUT THIS USER
RETERR (CKAX2) ;ILLEGAL DIRECTORY NUMBER
ULKDIR ;UNLOCK THE DIRECTORY LOCK FROM GETDDB
MOVE Q1,P6 ;GET AOBJN POINTER TO DIR GROUP LIST
CHKAC1: HLRZ T1,0(Q1) ;GET FIRST MEMBER OF GROUP
CALL CHKUGP ;CHECK IT AGAINST USER GROUPS
SKIPA ;NO MATCH
JRST [ MOVE A,P6 ;MATCH FOUND
CALL RELGRP ;RELEASE THE SPACE IN THE JSB
JRST CHKACT] ;RETURN TRUE
HRRZ T1,0(Q1) ;GET NEXT MEMBER OF GROUP
CALL CHKUGP ;CHECK FOR MATCH
SKIPA ;NO MATCH
JRST [ MOVE A,P6 ;MATCHED!
CALL RELGRP ;RELEASE THE JSB SPACE
JRST CHKACT] ;RETURN TRUE
AOBJN Q1,CHKAC1 ;LOOP UNTIL LIST IS FINISHED
MOVE A,P6 ;RELEASE THE SPACE IN JSB
CALL RELGRP
CHKACF: TDZA T1,T1 ;RETURN FALSE
CHKACT: SETO T1, ;TRUE
UMOVEM T1,1 ;STORE ANSWER
SMRETN ;AND RETURN
CHKDIR: CAIL P1,.CKADR ;IS THIS A LEGAL FUNCTION CODE
CAILE P1,.CKACF
RETERR (CKAX3) ;NO, ILLEGAL ACCESS CODE
SUBI P1,.CKADR ;SET UP FOR MASK BUILDING
MOVE T4,DIRORA ;GET BASE OF DIR AREA
LOAD T4,DRPRT,(T4) ;GET DIR PROTECTION
HRL P5,T4 ;ONLY WANT 18 BITS
MOVEI T4,77 ;DONT CARE ABOUT DIR PROTECTION CHECK
JRST CHKAC0 ;GO FINISH JSYS
;ROUTINE TO COPY A LIST OF GROUPS TO THE JSB
; CALL CPYDGP OR CALL CPYUGP
;RETURNS +1: NO GROUPS
; +2: AOBJN POINTER TO LIST IN JSB RETURNED IN T1
CPYDGP::EA.ENT ;ENTER SEC 1
MOVE D,DIRORA ;GET BASE OF DIR AREA
LOAD D,DRDGP,(D) ;GET DIR GROUP LIST
JRST CPYUG0 ;ENTER COMMON CODE
CPYUGP::EA.ENT ;ENTER SEC 1
MOVE D,DIRORA ;GET BASE OF DIR AREA
LOAD D,DRUGP,(D) ;GET USER GROUP LIST
CPYUG0: JUMPE D,R ;IF 0, NO LIST
STKVAR <CPYUGA>
ADD D,DIRORA ;GET ABS ADR OF LIST
LOAD C,BLKTYP,(D) ;GET TYPE OF THIS BLOCK
CAIE C,.TYGDB ;MUST BE A DIRECTORY GROUP BLOCK
RET ;DIR IS SCREWED UP
LOAD B,BLKLEN,(D) ;GET LENGTH OF BLOCK
SOS B ;SKIP OVER HEADER
MOVEM D,CPYUGA ;SAVE ADR OF LIST
CALL ASGJFR ;GET A BLOCK FROM JSB
RET ;NO ROOM
MOVE D,CPYUGA ;GET BACK ADR OF LIST
HRRZ B,0(A) ;GET LENGTH OF DIR LIST
MOVNS B ;SET UP AN AOBJN POINTER TO JSB
HRL A,B
MOVE C,A ;LEAVE POINTER IN A
CPYUGL: MOVE B,1(D) ;GET NEXT ELEMENT IN LIST
MOVEM B,0(C) ;STORE IN JSB
AOS D ;STEP TO NEXT ELEMENT IN LIST
AOBJN C,CPYUGL ;LOOP TIL LIST IS COPIED
RETSKP ;RETURN SUCCESSFUL WITH POINTER IN A
;ROUTINE TO RELEASE A GROUP LIST FROM JSB
;ACCEPTS IN A/ POINTER TO LIST
; CALL RELGRP
;RETURNS +1: ALWAYS
RELGRP::HLRE B,A ;GET LENGTH OF BLOCK
HRRZS A ;INSURE IN THIS SECTION
MOVNM B,(A) ;STORE LENGTH IN BLOCK
HRRZ B,A ;GET ADR OF BLOCK
MOVEI A,JSBFRE
CALLRET RELFRE ;RELEASE THE BLOCK
REPEAT 0,< ;***** NO LONGER USED ****
;MDDT INTERNAL SUBROUTINE CALL. THIS SUBROUTINE IS THE INTERFACE
;BETWEEN MDDT AND THE REST OF THE MONITOR. CALL:
;
; AC1/ FUNCTION CODE
; AC2-AC4/ ARGUMENTS
; CALL .IMOPR
; ERROR RETURN
; SUCCESSFUL RETURN
.IMOPR::JUMPLE T1,R ;FAIL IF NOT POSITIVE
CAIG T1,IMMAX ;FUNCTION LEGAL?
SKIPN HSYBLK ;SYMBOLS HIDDEN? (FUNCTIONS SO FAR NEED THIS)
RET ;NO, GIVE ERROR RETURN
JRST @IMTAB-1(T1) ;GO TO PROPER ROUTINE
IMTAB: IFIW IMALC ;(1) ALLOCATE PAGES FOR USE
IFIW IMMAP ;(2) MAP PAGES OF THE SYMBOL SPACE
IFIW IMUMAP ;(3) UNMAP PAGES OF SYMBOLS
IMMAX==.-IMTAB ;HIGHEST FUNCTION
;FUNCTION .IMALC. ALLOCATES A PAGE FOR USE IN MAPPING SYMBOLS. PAGE
;IS RELEASED WHEN FORK IS DESTROYED. MULTIPLE CALLS WILL RETURN THE
;SAME PAGE. ARGUMENTS:
;
; T2/ NUMBER OF PAGES DESIRED (ONLY 1 IS LEGAL NOW)
;
;RETURNS PAGE NUMBER OF FIRST PAGE IN T1.
IMALC: CAIE T2,1 ;ASKING FOR ONE PAGE?
RET ;NO, FAIL
NOINT ;PREVENT INTERRUPTIONS
SKIPE T1,SYMPAG ;PREVIOUSLY ALLOCATED A PAGE?
JRST IMALCH ;YES, RETURN IT
CALL ASGPAG ;GET A NEW JSB PAGE
SETZ T1, ;NONE AVAILABLE
MOVEM T1,SYMPAG ;REMEMBER FOR LATER USE
IMALCH: OKINT ;INTERRUPTS OK NOW
LSH T1,-PGSFT ;CONVERT TO PAGE NUMBER
JUMPN T1,RSKP ;SKIP RETURN IF GOT A PAGE
RET ;OTHERWISE FAIL
;FUNCTION .IMMAP. MAP PAGES OF THE SYMBOL SPACE. USED BY MDDT
;AND SNOOP JSYS. ARGUMENTS:
;
; T2/ PAGE IN SYMBOL SPACE TO MAP
; T3/ PAGE IN MONITOR SPACE TO MAP TO
; T4/ COUNT OF PAGES TO MAP. 1B0 SET IF WRITE ENABLED
IMMAP: MOVE T1,T2 ;SET UP PAGE NUMBER TO MAP
HRL T1,SYMBAS ;AND PUT IN SPT INDEX OF SYMBOL MAP
TDNN T2,[-1,,777000] ;SYMBOL SPACE EXISTS ONLY IN SECTION 0
IMMAP1: TDNE T3,[-1,,776000] ;SEE IF PAGE IS SECTION 0 OR 1
RET ;IF NOT, ERROR
ANDI T3,777 ;MAKE SECTION 1 SAME AS SECTION 0
MOVE T2,T3 ;GET PAGE WHERE WE MAP TO
LSH T2,PGSFT ;TURN INTO ADDRESS
TXZE T4,1B0 ;WANT IT WRITE-ENABLED?
TXO T2,PTRW ;YES, SET WRITE BIT
TLNN T4,-1 ;CHECK REST OF LEFT HALF
TRNN T4,-1 ;AND MAKE SURE HAVE NONZERO COUNT
RET ;NO, ERROR
ADDI T3,-1(T4) ;CALCULATE LAST PAGE TO BE MAPPED
TRNE T3,777000 ;MAKE SURE IT STAYS IN SECTION 0
RET ;NO, ERROR
MOVE T3,T4 ;PUT COUNT IN RIGHT AC
CALL MSETMP ;DO THE MAPPING
RETSKP ;GOOD RETURN
;FUNCTION .IMUMP. UNMAP SYMBOL PAGES. ARGUMENTS ARE:
;
; T2/ PAGE IN NORMAL SPACE WHERE SYMBOLS WERE MAPPED
; T3/ COUNT OF PAGES TO UNMAP
IMUMAP: MOVE T4,T3 ;MOVE ARGS TO RIGHT ACS
MOVE T3,T2 ;SO CAN JOIN OTHER ROUTINE
SETZM T1 ;ZERO FOR UNMAP
CALLRET IMMAP1 ;GO DO THE WORK
> ;**** END OF REPEAT 0 AROUND .IMOPR ****
;LOGOUT
.LGOUT::MCENT
CAME 1,[-1] ;SELF?
JRST ELOGO ;NO
MOVSI 1,(SC%LOG)
TDNN 1,CAPMSK ;LOG PERMITTED?
RETERR (LOUTX4) ;NO, ERROR RETURN
SETONE JSELO ;FLAG THAT JOB EXECUTED ITS OWN LGOUT
LOGO: SE1ENT ;GET TO SECTION 1
MOVE T1,JOBNO ;GET CORRECT JOB NUMBER
CALL LGOGOK ;CHECK TO SEE IF LOGO LEGAL
SKIPN FORKN ;TOP FORK?
JRST FLOGO1 ;YES
NOINT
HLRZ 1,FORKN ;NO, GET ITS NUMBER
HRRZ 2,SYSFK(1)
NOSKED
SETONE <FKPS0,FKILO>,(T2) ;REQUEST LOGOUT INTERRUPT
CALL PSIR4
OKSKED
OKINT
JRST WAIT1 ;WAIT FOR TOP FORK TO KILL THE JOB
;ROUTINE CALLED TO LOGOUT ANOTHER JOB.
;ACCEPTS: A/ JOB NUMBER
;RETURNS: +1 WITH LOGOUT REQUESTED
RESCD ;MUST BE RESIDENT AS CALLED BY SCHEDULER
ELOGOO::NOSKD1 ; prevent races
SKIPGE JOBRT(T1) ; job exist?
JRST [ OKSKD1 ; no, fail
RET] ; ..
HRRZ 2,JOBPT(1) ;TOP FORK OF OBJECT JOB
SETONE <FKPS0,FKILO>,(T2) ;REQUEST LOGOUT INTERRUPT
CALL PSIR4
OKSKD1 ;ALLOWING SCHEDULING AGAIN
RET ;AND DONE
;THE FOLLOWING IS RUN IN THE TOP FORK OF A JOB TO RESPOND TO
;A LOGOUT REQUEST FROM ANOTHER JOB.
;HERE FROM PSI SERVICE DEBREAK. FFL AND FPC SETUP.
SWAPCD
FLOGO:: MCENTR ;SIMULATE ENTRY FROM USER
; ..
;THE FOLLOWING CODE DOES THE ACTUAL LOGOUT. IT RUNS ONLY IN
;THE TOP FORK OF THE JOB BEING LOGGED OUT
; ..
FLOGO1: MOVX 1,LOGIOB ;SAY JOB DESTRUCTION IN PROGRESS
IORM 1,JOBBIT
MOVEI 1,400000
SETO 2,
DIC ;DEACTIVATE INTERRUPTS AND KEYS
CALL DTIALL
CALL NETLGO ;RELEASE ANY JOB-WIDE NETWORK RESOURCES
CALL INTLGO ;RELEASE ANY JOB WIDE INTERNET RESOURCES
CALL DAPLGO ;RELEASE ANY JOB-WIDE DAP% RESOURCES
MOVE T1,FORKX ;GET FORK NUMBER OF TOP FORK
CALL SCSLGO ;RELEASE ANY SCS% RESOURCES OWNED BY TOP FORK
MOVEI T1,-4
KFORK ;DELETE FORKS
MOVE T1,JOBNO ;MARK THAT I AM NO LONGER OWNED
SETOM JOBONT(T1) ; ..
MOVSI T3,-NJOBS ;LOG OUT ANY JOBS WHICH I OWN
SJLGO1: HRRZ T2,JOBONT(3) ;DO I OWN THIS ONE?
CAME T2,GBLJNO ; ..
JRST SJLGO2 ;NO.
SETOM JOBONT(T3) ;MAKE IT UNOWNED, SO IT FINISHES
MOVEI T1,0(T3) ;YES. LOG IT OUT.
CALL LCL2GL ;Convert his index into a global job number
JRST SJLGO2 ;and go back to the loop
LGOUT
JFCL ;SHOULD HAVE WORKED.
SJLGO2: AOBJN T3,SJLGO1 ;SEE IF I OWN ANY MORE JOBS
; ..
; ..
SJLGO4: SETO T1, ;CLEAR USER MAP OF TOP FORK
MOVSI 2,<.FHSLF!FH%EPN> ;THIS FORK
MOVE 3,[PM%CNT!PM%EPN!<1000>B35] ;REQUEST 1000 PAGES
PMAP
ERJMP .+1
MOVE FX,FORKX
RESET ;CLEAN UP JSB STACK
LOAD 1,FKJSB ;GET JSB
CALL WTSPT ;WAIT FOR SHR CNT OF 1
SKIPL CTRLTT
RESET ;RESET TTY MODES, ETC.
CALL UNPAGE ;CLEAR PAGE MODE
MOVE T1,FORKX ;THIS FORK...
CALL ENQFKR ;RELEASE ANY ENQ LOCKS OWNED BY THIS JOB
MOVE 1,[CZ%ARJ+CZ%ABT+400000] ;WAIT+FLUSH NONX + THIS FORK
CLZFF
IFE FTNSPSRV,<
CALL SCLGOU ;CLEAN UP DECNET SJB, PORT TABLE, AND SAB
CALL LLMRSJ ;~6.0 Release LLMOP Request Blocks for this job
>
MOVE 1,FORKX ;NOW KILL PIDS OF THIS FORK
CALL PIDKFK ; INCLUDING JOB WIDE PIDS
CALL CLKREL ;RELEASE TIMER BLOCKS
MOVE 4,JOBNO
HRRZ 1,JOBDIR(4) ;GET LOGIN DIR
JUMPE 1,LOG1 ;DON'T EXPUNGE IF NOT LOGGED IN
HRLI T1,USRLH ;GET USER NUMBER
CALL CNVDIR ;CONVERT IT TO A DIRECTORY NUMBER
MOVE T2,T1 ;SET UP FOR DELDF
MOVX T1,DD%DTF ;DELETE TEMPORARY FILES
PUSH P,T2 ;SAVE DIR NUMBER
DELDF ;EXPUNGE LOGIN DIR
ERJMP .+1 ;DONT STOP ON ERRORS
CALL GTCSCD ;GET CONNECTED STRUCTURE,,DIRECTORY
POP P,T3 ;GET BACK DIR # FROM LAST DELDF
CAMN T1,T3 ;ARE THEY THE SAME?
JRST LOG0 ;YES, DO NO EXPUNGE AGAIN
MOVE T2,T1 ;GET DIR NUMBER INTO 2
MOVX T1,DD%DTF ;DELETE TEMPORARY FILES
DELDF ;EXPUNGE CONNECTED DIR
ERJMP .+1 ;DONT STOP ON ERRORS
LOG0: CALL LOGSTR ;GO DECREMENT MOUNT COUNT FOR ALL STR'S
; THIS JOB HAS MOUNTED
MOVNI 1,1 ;NOW RELEASE ALL ASSIGNED DEVICES
RELD
JFCL
MOVE 1,LOGDES
DOBE ;WAIT FOR LOG TTY INACTIVE
CALL LOGTOT ;SUMMARY TO LOG TTY
CALL LOGTUS ;Perform USAGE for logout
LOG1: HRRE 1,CTRLTT
JUMPL 1,LOG2 ;CONTROL TTY?
MOVEI 1,400000(1) ;YES, PRINT LOGOUT MESSAGE
RFMOD ;TURN OFF PAGE MODE
ERJMP .+1 ;ignore errors
TXZ 2,TT%PGM ;TO ALLOW THE MESSAGE TO COME OUT
STPAR
ERJMP .+1 ;ignore errors
CFOBF ;FLUSH OUTPUT BUFFER FOR GOOD MEASURE
ERJMP .+1
CALL LOGTOT
HRLOI T1,(TL%CRO+TL%COR+TL%SAB+TL%ABS)
SKIPGE T2,CTRLTT ;GET TTY
JRST LOG2 ;IF DETACHED
CAMN T2,CTYLNO ;Logging off CTY?
TXZ T1,TL%ABS ;Yes - set refuse links
MOVEI T2,-1
TLINK ;BREAK LINKS, SET ACCEPT
JFCL
REPEAT 1,<
MOVEI T4,^D15 ;WAIT FOR 15 SECONDS MAX
LOG21: HRRE T1,CTRLTT ;GET TTY #
JUMPL T1,LOG2 ;NONE
MOVEI T1,400000(1) ;GET DESIGNATOR
SOBE ;LOGOUT MESSAGE COMPLETE?
IFNSK.
MOVEI T1,^D1000 ;NO, WAIT A SECOND
DISMS
SOJG T4,LOG21 ;TRY AGAIN OR GIVE UP
ENDIF.
>
REPEAT 0,< ;ALTERNATE WAY OF DOING THIS
HRRE T1,CTRLTT ;GET TTY #
JUMPL T1,LOG2 ;NONE
MOVEI T1,400000(1) ;GET DESIGNATOR
DOBE ;WAIT FOR THE MESSAGE TO COMPLETE
>
DO.
SKIPGE T2,CTRLTT ;IF DETACHED, DON'T HANG UP
EXIT.
MOVE T1,JOBNO
HRRZ T1,JOBDIR(1)
IFE. T1 ;LOGGED IN?
SKIPN HNGU0F ;NO, HANGUP IN THIS CASE?
EXIT. ;NO
ELSE.
SKIPN HNGU1F ;YES, HANGUP IN THIS CASE?
EXIT. ;NO
ENDIF.
CALL TTHNGU ;HANG UP LINE
ENDDO.
;HERE IF NO CTY
LOG2: MOVEI T1,SPIDTB+.SPQSR ;GET PID ADDRESS
SKIPE SPIDTB+.SPQSR ;IS QUASAR RUNNING?
CALL LOGOMS ;YES, SEND IT A MESSAGE
JFCL
MOVEI T1,SPIDTB+.SPOPR ;GET ORION PID ADDRESS
SKIPE SPIDTB+.SPOPR ;RUNNING?
CALL LOGOMS ;YES, SEND IT A MESSAGE
JFCL
SKIPE T1,JSLOPD ;IS THERE A PID IN JSB FOR LGOUT MSG?
CALL LOGOMO ;YES. SEND THE LOGOUT MESSAGE TO CREATOR
JFCL
MOVE T1,GBLJNO ;GET GLOBAL JOB NUMBER
CALL JBAVAL ;TELL CFS TO RELEASE IT
JRST HLTJB
LGOGOK: SAVET
HRRZ T1,JOBDIR(T1) ;DIRECTORY
JUMPE T1,R ;QUIT NOT LOGGED IN
HRLI T1,USRLH
CALL CNVDIR ;GET DIRECTORY NUMBER
GTDAL ;GET ALLOCATION
ERJMP R ;QUIT SOME ERROR
UMOVE T1,T1 ;GET ORIG ARGUMENT
GTOKM (.GOLGO,<T2,T3,T1>,[RETBAD ()]) ;ASK PERMISSION
RET ;RETURN TO CALLER
;LOGSTR - ROUTINE TO DECREMENT MOUNT COUNT FOR ALL STRUCTURES THIS
; JOB HAS MOUNTED.
;
;CALL: CALL LOGSTR
;RETURNS: +1 ALWAYS
LOGSTR: SAVEP
LOCK JSSTLK ;LOCK THE JSB STRUCTURE INFO DATA
MOVSI P1,-STRN ;SET UP TO LOOP OVER STR INFO BLOCKS IN JSB
MOVEI P2,JSSTRT ;GET ADDRESS OF FIRST BLOCK TO LOOK AT
LGST10: JE <JSMCI,JSXCL>,(P2),LGST20 ;IF THIS JOB DIDN'T MOUNT THIS STR, CHECK NEXT
LOAD T1,JSSTN,(P2) ;GET UNIQUE CODE FOR THIS STRUCTURE
CALL CNVSTR ;GET STRUCTURE # AND LOCK THE STRUCTURE
JRST LGST20 ;FAILED, MUST ALREADY BE DISMOUNTED, GO ON
MOVEM T1,P3 ;SAVE STRUCTURE NUMBER
JN JSXCL,(P2),[ MOVX T1,D1%INI ;IF MOUNTED EXCLUSIVELY BY THIS JOB,
ANDCAM T1,DEVCH1+DVXST0(P3) ; MAKE STR GENERALLY AVAILABLE
JRST .+1]
JE JSMCI,(P2),LGST15 ;IF MOUNT COUNT NOT INCREMENTED, GO UNLOCK STR
MOVE T1,P3 ;GET STRUCTURE NUMBER AGAIN
MOVE T2,P2 ;GET ADDRESS OF STR INFO BLOCK IN JSB
MOVE T3,JOBNO ;GET JOB NUMBER
CALL DECMNT ;GO DECREMENT THE MOUNT COUNT FOR THIS STR
JFCL ;IGNORE FAILURE, GO ON
LGST15: MOVE T1,P3 ;RESTORE STRUCTURE NUMBER
CALL ULKSTR ;UNLOCK THE STRUCTURE NOW
LGST20: ADDI P2,JSSTMX ;GET ADDRESS OF NEXT STR INFO BLOCK IN JSB
AOBJN P1,LGST10 ;GO CHECK NEXT STR INFO BLOCK
UNLOCK JSSTLK ;DONE, UNLOCK THE JSB STR INFO LOCK
RET ;RETURN
;THE FOLLOWING IMPLEMENTS LOGOUT OF A JOB OTHER THAN SELF.
;LEGAL IF USER IS SC%WHL OR SC%OPR, OR IF OTHER JOB IS SAME USER
ELOGO: MOVE T2,GBLJNO ;GIVEN JOB NUMBER TO LOGOUT
CAIN T2,0(T1) ;SELF?
RETERR(LOUTX1) ;YES, CAN'T SAY IT THAT WAY
JUMPE T1,[RETERR (LOUTX5)] ;CANNOT LOGOUT JOB 0
CALL GL2LCL ;CONVERT GLOBAL JOB NUMBER TO LOCAL INDEX
RETERR(LOUTX2) ;ILLEGAL JOB NUMBER
MOVE P1,T1 ; preserve target job index
CALL LGOGOK ;GETOK CHECK
NOSKED ; prevent races
SKIPGE JOBRT(P1) ;EXISTS?
RETERR(LOUTX2,OKSKED) ; no, fail
MOVE T1,P1 ; target job index
CALL SETJSB ; map its JSB
MOVE P2,T1 ; preserve JSB address
HRRZ T3,JOBDIR(P1) ;LOGIN DIRECTORY OF OBJECT JOB
MOVE T1,JOBNO ; our job number
XOR T3,JOBDIR(T1) ; our directory number
TRNN T3,-1 ;SAME AS THIS JOB?
JRST ELOGO1 ;YES, THAT'S OK
HLRE T1,JOBPT(P1) ;GET TTY OF THE JOB BEING LOGGED OUT
JUMPL T1,ELOGO3 ;JUMP IF DETACHED
CALL PTGETJ ;GET CONTROLLING JOB # IF TTY IS A PTY
JUMPL T1,ELOGO3 ;JUMP IF NOT A PTY JOB
CAMN T1,JOBNO ;JOB BEING CONTROLLED BY JOB DOING THE LGOUT
JRST ELOGO1 ;YES, SO DO IT
ELOGO3: HRRZ T3,JOBONT(P1) ;DO I OWN THAT JOB IN CRJOB SENSE?
CAMN T3,GBLJNO ;JOBONT contains global job numbers
JRST ELOGO1 ;YES. OK TO LOG IT OUT.
MOVEI T3,SC%WHL+SC%OPR ;OTHERWISE MUST BE SC%WHL
TDNN T3,CAPENB
JRST [ CALL CLRJSB ; unmap the JSB
RETERR(LOUTX3,OKSKED)] ; quit
ELOGO1: SETOM JOBONT(P1) ;MAKE IT UNOWNED SO IT CAN LOG OUT
SETONE JSOLO,(P2) ;FLAG IN IT THAT SOMEONE LGOUT'ED IT
MOVE T1,JOBNO ;AND WHO IT WAS
MOVEM T1,JSLOJB(P2) ; ..
CALL CLRJSB ;LET GO OF THE JSB
MOVE T1,P1 ; target job number
CALL ELOGOO ;LOG OUT THE TARGET JOB
OKSKED
SMRETN ;AND DONE
;LOGGING FUNCTIONS
;TYPE LOGOUT MESSAGE, DESTINATION DESIGNATOR IN 1
LOGTOT::SKIPE 2,JSLOJB ;DID SOMEONE ELSE LOG OUT THIS JOB?
CALL LOGTOK ;YES - INFORM THE VICTIM
HRROI 2,[ASCIZ /Killed/]
CALLRET LOGUSD ;Log job and time used info, setup time for USAGE
; and return from LOGTOT
;SUBROUTINE TO TELL A VICTIM ABOUT WHO LOGGED OUT HIS JOB
LOGTOK: PUSH P,T2 ;SAVE JOB NUMBER OF MURDERER
HRROI T2,[ASCIZ /Killed by /]
PUSHJ P,LOGMES
MOVE T2,(P) ;GET KILLER BACK
HRRZ T2,JOBDIR(T2)
JUMPE T2,LOGTK1 ;SKIP THIS IF HE'S NOT LOGGED IN
HRLI T2,USRLH ;ELSE OUTPUT USER'S NAME
MOVE T3,T1 ;SAVE OUTPUT DESIGNATOR
DIRST
ERJMP [MOVE T1,T3 ;IF ERROR, RESTORE OUTPUT DESIGNATOR
JRST .+1]
LOGTK1: POP P,T2 ;GET JOB NUMBER
HLRZ T2,JOBPT(T2) ;GET CONTROLLING TERMINAL OF THAT JOB
JUMPL T2,LOGTK2 ;IF JOB IS DETACHED SKIP THIS
PUSH P,T2 ;ELSE SAVE TERMINAL NUMBER
HRROI T2,[ASCIZ /, TTY /]
PUSHJ P,LOGMES
POP P,T2 ;GET TERMINAL NUMBER AGAIN
MOVEI T3,^D8 ;PRINT IT IN OCTAL
PUSHJ P,LGNOUT
LOGTK2: CALLRET LOGCR ;OUTPUT A CRLF AND RETURN
;Perform USAGE for logout
LOGTUS: MOVEI T1,.USLGO ;LOGOUT FUNCTION
MOVEI T2,LOGLST
USAGE ;USAGE JSYS
ERJMP XUSAGE ;REPORT FAILURE
RET ;Return from LOGTUS
;LOGON MESSAGE, CALLED FROM .LOGIN
LOGONM::SKIPL 1,LOGDES
DOBE ;WAIT FOR OTHER USE OF TTY TO FINISH
HRROI 2,[ASCIZ /Login/]
CALL LOGMES
MOVE T2,CTRLTT ;T2/ LINE NUMBER
CALL LOGJOB
PUSH P,1
MOVEI T1,.USLGI ;LOGIN FUNCTION
MOVEI T2,LOGLST ;POINT TO PARAMETERS
USAGE
ERJMP [CALL XUSAGE ;REPORT USAGE FAILURE
JRST .+1]
POP P,1
CALLRET LOGCR ;AND CRLF
XUSAGE: BUG.(CHK,UXXFAI,MEXEC,HARD,<USAGE JSYS FAILURE>,,<
Cause: This BUG is not documented yet.
Action:
>)
RET ;CONTINUE
;PARAMETER BLOCK FOR LOGIN/LOGOUT/SESSION CHANGE CALLS
LOGLST: USENT. (.UTSEN,1,1) ;SESSION ENTRY TYPE
USRTM. (JBRUNT) ;RUN-TIME
USACT. (<-1,,ACCTSR>) ;ACCOUNT
USSST. (CTIMON) ;SESSION START DATE/TIME
USJTY. (-1) ;BATCH T/S FLAG
USBJN. (JBBNAM) ;BATCH JOB NAME
USBSN. (JBBSEQ) ;BATCH SEQ NUMBER
USCOM. (<-1,,JSSRM+1>) ;SESSION REMARK
USCCT. (CONCON) ;CONSOLE CONNECT TIME
USPNM. (<SIXBIT "MONITR">,US%IMM)
USPVR. ([EXP SVNM]) ;MONITOR NAME AND VERSION
USNM2. (<-1,,USRNAM+1>) ;USER NAME
0 ;END OF LIST
;CHANGED ACCOUNT NUMBER MESSAGE
LOGCJM::SKIPL 1,LOGDES
DOBE
HRROI 2,[ASCIZ /Changed/]
CALL LOGUSD ;Log job and time used, setup for time for USAGE
MOVE T2,JBRUNT ;Get session runtime
ADDM T2,JSSRTM ;Update session runtime start for next session
MOVE T2,CONCON ;Get session connect time
ADDM T2,JSSCTM ;Update session console time start
PUSH P,1 ;SAVE OUTPUT DESIGNATOR
MOVEI T1,.USSEN ;SESSION ENTRY CODE
MOVEI T2,LOGLST ;PARAMS
USAGE
ERJMP [CALL XUSAGE
JRST .+1]
POP P,1 ;RESTORE
RET ;Return from LOGCJM
;Print job info, time used, and setup times for USAGE
LOGUSD: CALL LOGMES ;Print message type
MOVE T2,CTRLTT ;Get controlling terminal number
CALL LOGJOB ;Type job and terminal info
HRROI T2,[ASCIZ /, Used /]
CALL LOGMES ; . . .
MOVE T2,JOBNO ;Get this job's number
MOVE T2,JOBRT(T2) ;Get runtime of job
MOVE T3,T2 ;Copy it again
SUB T3,JSSRTM ;Compute session runtime
MOVEM T3,JBRUNT ;Save for USAGE
CALL LOGTIM ;Print runtime
HRROI T2,[ASCIZ / in /]
CALL LOGMES ; . . .
MOVE T2,TODCLK ;Get current uptime
SUB T2,CONSTO ;Compute console time logged in
MOVE T3,T2 ;Copy console time
SUB T3,JSSCTM ;Compute console time this session
MOVEM T3,CONCON ;Save console time for USAGE
CALL LOGTIM ;Print console time
SKIPN JSSRTM ;Session start
SKIPE JSSCTM ; at beginning of job?
SKIPA ;No-- print time this session
JRST LOGUS2 ;Yes-- don't repeat ourselves
HRROI T2,[ASCIZ /,
Used this session /]
CALL LOGMES ; . . .
MOVE T2,JBRUNT ;Get session time
CALL LOGTIM ;Print it
HRROI T2,[ASCIZ / in /]
CALL LOGMES ; . . .
MOVE T2,CONCON ;Get console time this session
CALL LOGTIM ;Print it
LOGUS2:
CALLRET LOGCR ;Finish with CRLF
;PRINT TIME FROM 2
LOGTIM: JUMPL 1,R
IDIVI 2,^D1000 ;MS TO SECS
IDIVI 2,^D60 ;PEEL OFF SECONDS
PUSH P,3
IDIVI 2,^D60 ;PEEL OFF MINUTES
PUSH P,3
CALL LOGNUM ;PRINT HOURS
MOVEI 2,":"
BOUT
ERJMP .+1 ;NOTHING ELSE TO DO
POP P,2
CALL LOG2NM ;PRINT MINUTES
MOVEI 2,":"
BOUT
ERJMP .+1 ;NOTHING ELSE TO DO
POP P,2
CALL LOG2NM ;PRINT SECONDS
RET
;ATACH AND DETACH MESSAGES
;DETMSG - RECORD DETACHING OF JOB
;ACCEPTS:
; T2/ LINE NUMBER
DETMSG: STKVAR <DETMLN>
MOVEM T2,DETMLN ;SAVE LINE NUMBER
HRROI 2,[ASCIZ /Detached/] ;WORD FOR LOG TTY
SKIPL 1,LOGDES
DOBE
CALL LOGMES
MOVE T2,DETMLN ;T2/ LINE NUMBER
CALL LOGJOB
;*** DETACH ***
CALLRET LOGCR ;CRLF AND RETURN
DETMS0: ASUBR <ATAJN,ATALN> ;JOB # , LINE #
HRROI 2,[ASCIZ /Detached job /]
SKIPL 1,LOGDES
DOBE
CALL LOGMES
MOVE 2,ATAJN ;GET REMOTE JOB NUMBER
CALL LOGNUM
HRROI 2,[ASCIZ / from TTY /]
JRST ATAMS3
ATAMSG: ASUBR <ATAJN,ATALN> ;JOB # , LINE #
SKIPL 1,LOGDES
DOBE
HRROI 2,[ASCIZ /Attached job /]
CALL LOGMES
MOVE T2,ATAJN ;GET JOB NUMBER
CALL LOGNUM ;PRINT IT
HRROI 2,[ASCIZ / to TTY /]
ATAMS3: CALL LOGMES
MOVE T2,ATALN ;LINE NUMBER
MOVEI 3,^D8 ;PRINT IN OCTAL
CALL LGNOUT
CALL LOGJ2 ;PRINT AND STORE TOD
;*** ATTACH ***
CALLRET LOGCR ; END WITH CRLF
;PRINTS JOB 1, TTY 40, AT 12:34:56
; OR JOB 1, DETACHED, AT 12:34:56
;ACCEPTS:
; T2/ LINE NUMBER
LOGJOB: STKVAR <LOGJLN>
MOVEM T2,LOGJLN ;T2/ LINE NUMBER
HRROI 2,[ASCIZ / Job /]
CALL LOGMES
MOVE T2,GBLJNO ;Print global job number
CALL LOGNUM
MOVE 2,JOBNO ;Get Job index
HRRZ 2,JOBDIR(2)
JUMPE 2,LOGJ3 ;LOGGED IN NOW?
HRROI 2,[ASCIZ /, User /]
CALL LOGMES
MOVE 2,JOBNO
HRRZ 2,JOBDIR(2)
HRLI 2,USRLH ;TURN IT INTO A 36 BIT USER NUMBER
MOVE 3,1 ;SAVE OUTPUT DESIGNATOR
CAIL 1,0
DIRST ;DIRECTORY NAME
MOVE 1,3 ;IF ERROR, RESTORE OUTPUT DESIGNATOR
HRROI 2,[ASCIZ /, Account /]
CALL LOGMES
CALL LOGACC
LOGJ3: MOVE 2,LOGJLN
JUMPL 2,LOGJ1 ;IF NO CTRL TTY (DETACHED JOB)
HRROI 2,[ASCIZ /, TTY /]
CALL LOGMES
MOVE 2,LOGJLN
MOVEI 3,^D8 ;PRINT TTY NUMBER IN OCTAL
CALL LGNOUT
LOGJ2: HRROI 2,[ASCIZ /,
at /]
CALL LOGMES
PUSH P,1 ;SAVE DESIGNATOR
CALL LGTAD ;DO LOCAL GTAD
MOVE 2,1
POP P,1 ;RESTORE DESTINATION
JUMPL 1,R
SETZ 3, ;STANDARD DATE AND TIME
CAIL 2,0
ODTIM
ERJMP .+1
RET
LOGJ1: HRROI 2,[ASCIZ /, Detached/]
CALL LOGMES
JRST LOGJ2
LOGACC: HRROI T2,ACCTSR ;POINT TO STRING
MOVEI T3,0 ;TERMINATE ON NULL
CAIL T1,0 ;VALID PNTR
SOUT ;YES - OUTPUT STRING
RET ;RETURN
LOGMES: SETZ 3,
SOUT
ERJMP .+1
RET
LOG2NM: SKIPA 3,[EXP NO%LFL!NO%ZRO+^D2B17+^D10] ;Decimal, two digits
LOGNUM: MOVEI 3,^D10 ;DECIMAL FOR TIMES, ETC.
LGNOUT: NOUT
ERJMP .+1
RET
LOGCR: HRROI 2,[ASCIZ /
/]
SETZ 3,
SOUT
ERJMP .+1
RET
;PRINTS [JOB N DETACHED BY NAME] TO TTY OF JOB BEING ATTACHED
; OR UNATTACHED.
;ACCEPTS: 1/JOB # OF JOB BEING UNATTACHED
; 2/LINE # OF JOB BEING UNATTACHED
; 3/DIR # OF USER UNATTACHING THE JOB
; 4/TTY # OF USER UNATTACHING THE JOB
DETMS1: TRVAR <<MSGBUF,25>,JOB,LINE,DIRN,DTTYN,TMPPTR>
MOVEM 1,JOB ;SAVE INPUTS
MOVEM 2,LINE
MOVEM 3,DIRN
MOVEM 4,DTTYN ;SAVE TTY # OF DETACHER
HRROI 1,MSGBUF ;START FILLING BUFFER
CALL LOGCR ;CRLF
HRROI 2,[ASCIZ/[Job /]
CALL LOGMES
HRRZ 2,JOB ;JOB # TO BE PRINTED
CALL LOGNUM
HRROI 2,[ASCIZ/ detached by /]
CALL LOGMES
MOVE 2,DIRN
MOVEM 1,TMPPTR ;SAVE PLACE IN BUFFER IN CASE DIRST FAILS
DIRST ;GET USER WHO'S UNATTACHING THE JOB
ERJMP DIRFIX
DETMS2: SKIPGE DTTYN ;IS DETACHER ON A TTY?
JRST DETMS3 ;NO
HRROI 2,[ASCIZ/ on terminal /]
CALL LOGMES
MOVE 2,DTTYN ;Get the TTY number
MOVEI 3,10 ;OCTAL NUMBER
CALL LGNOUT
DETMS3: HRROI 2,[ASCIZ/]/]
CALL LOGMES
CALL LOGCR ;CLOSE WITH CRLF
MOVEI 1,.TTDES ;MAKE A TTY DESIGNATOR
ADD 1,LINE ;TTY LINE NUMBER
HRROI 2,MSGBUF ;POINT TO NOW-COMPLETED MESSAGE
TTMSG ;SEND IT OUT
ERJMP .+1
RET
;UNATTACHER NOT LOGGED IN
DIRFIX: MOVE 1,TMPPTR ;RESTORE BUFFER POINTER
HRROI 2,[ASCIZ/user/]
CALL LOGMES ;PLACE PSEUDO-NAME IN BUFFER
JRST DETMS2 ;FINISH ASSEMBLING THE MESSAGE
;INFO JSYS'S
.GJINF::MCENT
CALL GTCSCD ;GET CONNECTED STRUCTURE CODE,,DIRECTORY
MOVE T2,T1 ;RETURN CONNECTED STR/DIR NUMBER
MOVE T3,JOBNO
HRRZ T1,JOBDIR(T3)
SKIPE T1 ;IF NOT LOGGED IN, RETURN 0
HRLI T1,USRLH ;TURN THIS INTO A 36 BIT USER NUMBER
MOVE T4,CTRLTT
MOVE T3,GBLJNO ;RETURN GLOBAL JOB NUMBER FOR OURSELF
MR4: UMOVEM T4,T4
MR3: UMOVEM T3,T3
MR2: UMOVEM T2,T2
MR1: UMOVEM T1,T1
JRST MRETN
.TIME:: MCENT
MOVE 1,TODCLK ;TIME SINCE SYSTEM STARTED
MOVEI 2,^D1000 ;DIVISOR FOR SECONDS
JRST MR2 ;RETURN 2 AC'S
.RUNTM::MCENT
NOSKED
CALL UCLOCK ;UPDATE CLOCKS
OKSKED
CALL FLOCK ;LOCK THE FORK STRUCTURE
XCTU [HRRZ 1,1] ;FORK HANDLE
CAIN 1,-5 ;WHOLE JOB?
JRST RUNTM1 ;YES
CALL SETJFK
CALL SETLF1
MOVE 1,FKRT(1) ;FORK RUN TIME FROM PSB
JRST RUNTM2
RUNTM1: NOINT
MOVE 1,JOBNO
MOVE 1,JOBRT(1)
RUNTM2: MOVE 3,TODCLK ;CURRENT TIME
SUB 3,CONSTO ;LESS TIME ON, FOR CONSOLE TIME USED
MOVEI 2,^D1000 ;MILLISECONDS
RETA3: UMOVEM 1,1 ;RETURN VALUES IN 1,2,3
UMOVEM 2,2
UMOVEM 3,3
JRST CLFRET
.GTRPI::MCENT
CALL FLOCK ;LOCK THE FORK STRUCTURE
CALL SETLFK
MOVE 2,USWPCT(1)
MOVE 3,PTTIM(1)
IDIVI 3,^D100 ;RETURN MILLISEC, NOT HPTIM UNITS
MOVE 1,UTRPCT(1)
JRST RETA3
;GET DIRECTORY ALLOCATION
;ACCEPTS IN 1/ DIR # OR -1 FOR CONNECTED DIR
; GTDAL
;RETURNS +1: 1/ LOGGED IN QUOTA
; 2/ CURRENT ALLOCATION
; 3/ LOGGED OUT QUOTA
.GTDAL::MCENT
UMOVE T1,1 ;GET DIR #
CAMN T1,[-1] ;-1 MEANS CONNECTED DIRECTORY
CALL GTCSCD ;GET CONNECTED DIR NUMBER
CALL IGTDAL ;USE INTERNAL ROUTINE
ITERR() ;FAILED
JRST MR3 ;RETURN 1, 2 AND 3
;INTERNAL GTDAL, 1/ DIRECTORY #
IGTDAL::STKVAR <IGTDN>
MOVEM T1,IGTDN ;SAVE DIR #
CALL SETDIR ;MAP THE DIRECTORY IN
RETBAD () ;FAILED
HRRZ T1,IGTDN ;DIRECTORY NUMBER
LOAD T2,CURSTR ;STRUCTURE NUMBER
CALL GETCAL
JRST [ MOVE T3,DIRORA ;DIR NOT OPENED
LOAD T1,DRLIQ,(T3) ;LOGGED IN QUOTA
LOAD T2,DRDCA,(T3) ;CURRENT ALLOCATION
LOAD T3,DRLOQ,(T3) ;LOGGED OUT QUOTA
JRST IGTDX] ;EXIT
MOVE T3,DIRORA ;GET BASE ADR OF MAPPED DIR
MOVN T2,T1 ;NEGATE PAGES LEFT
LOAD T1,DRLIQ,(T3) ;GET LOGGED IN QUOTA
ADD T2,T1 ;ACTUAL USED
LOAD T3,DRLOQ,(T3) ;GET LOGGED OUT QUOTA
IGTDX: CALL USTDIR ;UNLOCK THE DIR
RETSKP ;GOOD RETURN
;HIGH PRECISION TIME JSYS
;MADE RESIDENT FOR SPEED
RESCD
.HPTIM::MCENT
CAIL 1,0 ;CHECK RANGE OF ARG
CAIL 1,NHPTIM
RETERR(HPTX1) ;UNDEFINED CLOCK
JRST HPTTAB(1)
HPTTAB: JRST HPT0 ;ELAPSED TIME
JRST HPT1 ;FORK RUNTIME
NHPTIM==.-HPTTAB
HPT0: NOSKED
JSP 4,MTIME ;READ TODCLK IN 1E-5 SECOND UNITS
OKSKED
UMOVEM 1,1
SMRETN
HPT1: NOSKED
CALL UCLOCK ;UPDATE USER RUNTIMES
OKSKED
MOVE 1,FKRT ;GET MILLISECOND PART
IMULI 1,NTMS ;CONVERT TO HP UNITS
ADD 1,RUNT2 ;INCLUDE FRACTION OF MILLISECOND
UMOVEM 1,1
SMRETN
SWAPCD
;GET NUMBER OF TABLE AND FIRST WORD GIVEN SIXBIT SYMBOL
; 1/ SIXBIT 'TABLENAME'
; SYSGT
; RETURN +1 ALWAYS,
; 1/ -LENGTH,,TABLENUMBER OR 0
.SYSGT::MCENT
MOVSI 4,-GTBSIZ
CAMN 1,SYMTAB(4)
JRST SYSGT1
AOBJN 4,.-2
XCTU [SETZM 2] ;NOT FOUND RETURN 0
JRST MRETN
SYSGT1: HLRZ 2,GTTSZ(4) ;SIZE
MOVN 2,2 ;NEGATE IT
HRLI 4,0(2) ;COMBINE WITH TABLE NUMBER
UMOVEM 4,2 ;GIVE TO USER
HRRZ T3,T4 ;GET TABLE NUMBER
SETZ T2, ;GET OFFSET ZERO
XCT GTGET(T3) ;GO GET THE FIRST ENTRY
UMOVEM 1,1 ;GIVE FIRST WORD TO USER
JRST MRETN
;GET TABLE ENTRY
; 1/ INDEX,,TABLENUMBER
; GETAB
; RETURN +1: ERROR
; RETURN +2: 1/ DATA
.GETAB::MCENT
MOVSI 2,(1B1)
TDNN 2,CAPMSK ;GETAB CAPABILITY EXISTS?
RETERR(GTABX3) ;NO
HLRZ 2,1 ;INDEX OR -1
MOVEI 3,0(1) ;TABLE NUMBER
CAIL 3,GTBSIZ ;LEGAL NUMBER?
RETERR(GTABX1) ;NO
HLRZ 1,GTTSZ(3) ;GET SIZE OF TABLE
CAIN 2,-1 ;INDEX OF -1?
JRST RETN1 ;YES, RETURN NEG OF TABLE SIZE
CAIL 2,0(1) ;INDEX WITHIN BOUNDS?
RETERR(GTABX2)
XCT GTGET(T3) ;GET WORD
UMOVEM 1,1 ;RETURN IT TO USER
SMRETN
RETN1: XCTU [MOVNM 1,1] ;RETURN NEG OF LENGTH
SMRETN
;Tables for GTTAB
;All tables defined with following macro which takes name of another
;macro to call for each table. Table indices are defined in MONSYM,
;order and place must be preserved if tables are added or deleted.
;Place may be held by call with no args.
;The argument to gtabs is a macro to be called for each table. five
;arguments are given, sixbit table name, location, length, routine,
;symbolic value for table number (from MONSYM).
; Note, job tables are accessed by Job index, which must be translated
; from the user-specified global job number by calling GL2LCL in CFSSRV.
; Therefore, the 'length' or maximum legal value for a user-specified
; global job number is the highest legal global job number, MXGLBS, and
; not the maximum local job index, NJOBS.
DEFINE GTABS (XXX)<
XXX JOBTTY,JOBPT,MXGLBS,GTJOB
XXX JOBRT,JOBRT,MXGLBS,GTJOB
XXX TICKPS,[^D1000],1
XXX ;;FORMERLY JOBDIR
XXX TTYJOB,0,NLINES,TTY2GL
XXX NCPGS,TOTRC,1
XXX DEVNAM,DEVNAM,NDEV
XXX DEVCHR,DEVCHR,NDEV
XXX DEVUNT,DEVUNT,NDEV
XXX DSKERR,DSKRCE,NDSKEW
XXX DRMERR,DRMCFE,NDRMEW
XXX SYSVER,SVN,NSVNT
XXX SYSTAT,SKDTM0,NSTAT
XXX QTIMES,QSUM,NQUEUE
XXX JOBNAM,JOBNAM,MXGLBS,GTJOB
XXX SNAMES,SNAMES,NNAMES
XXX STIMES,STIMES,NNAMES
XXX SPFLTS,SPFLTS,NNAMES
XXX SSIZE,SSIZE,NNAMES
XXX SNBLKS,SNBLKS,NNAMES
XXX DBUGSW,DBUGSW,2
XXX LOGDES,LOGDES,2
XXX PTYPAR,0,1,GTBPTY
XXX SYMTAB,SYMTAB,GTBSIZ
XXX DWNTIM,HSYST1,NHSYST
XXX JOBPNM,JOBPNM,MXGLBS,GTJOB
XXX BLDTD,SYSTAD,1
XXX ;;FORMERLY LSTDRN
XXX APRID,APRSER,1
XXX HQLAV,HQLAV,NRJAVS
XXX LQLAV,LQLAV,NRJAVS
XXX NETRDY,0,10,GNTRDY
XXX ;;FORMERLY IMPHRT
XXX ;;FORMERLY HSTSTS
XXX ;;FORMERLY HSTNAM
XXX ;;FORMERLY HOSTN
XXX ;;FORMERLY NETLSK
XXX ;;FORMERLY GNTFSK
XXX ;;FORMERLY NETAWD
XXX ;;FORMERLY NETBAL
XXX ;;FORMERLY NETSTS
XXX ;;FORMERLY NETBUF
XXX ;;FORMERLY NETBTC
XXX ;;FORMERLY IMPLT1
XXX ;;FORMERLY IMPLT2
XXX ;;FORMERLY IMPLT3
XXX ;;FORMERLY IMPLT4
XXX LHOSTN,NOHOST,2 ;;ARPA HOST NUMBER, NVT COUNTER
XXX JBONT,JOBONT,MXGLBS,GTJOB ;;OWNING JOB
XXX NSWPGS,NSWPGS,1 ;;DEFAULT SWAPPING PAGES
XXX SCOUNT,SCOUNT,NNAMES ;;COUNT OF SETSN'S S FOR SUBSYSTEM
XXX MONVER,137,1 ;;MONITOR VERSION NUMBER
>
;ASSEMBLE SYMBOL TABLE
DEFINE SYMT (NAM,LOC,SIZ,ROUT,VALUE)<
IFB <NAM>,<0> ;;LEAVE 0 IF PLACE RESERVED
IFNB <NAM>,<
IFB <VALUE>,< ;;IF VALUE WAS NOT SPECIFIED
..X==.'NAM ;;GET NAME FROM MONSYM
.'NAM::!SIXBIT /NAM/> ;;CHECK TABLE INDEX, ASSEMBLE SIXBIT
IFNB <VALUE>,< ;;IF VALUE WAS SPECIFIED
..X==VALUE ;;GET NAME FROM MONSYM
VALUE::!SIXBIT /NAM/>>> ;;CHECK TABLE INDEX, ASSEMBLE SIXBIT
SYMTAB::!PHASE 0 ;;MAKE TAGS BE RELATIVE TO 0
GTABS SYMT ;;ASSEMBLE SYMTAB, CHECK INDEX MNEMONICS
GTBSIZ::DEPHASE
;ASSEMBLE POINTERS AND SIZES
DEFINE LOCT (NAM,LOC,SIZ,ROUT,VALUE)<
IFB <NAM>,<0> ;;LEAVE 0 IF PLACE RESERVED
IFNB <NAM>,<
EXP LOC>> ;;30-BIT ADDRESS HERE
GTTAB:: GTABS LOCT
DEFINE SIZT (NAM,LOC,SIZ,ROUT,VALUE)<
IFB <NAM>,<0> ;;LEAVE 0 IF PLACE RESERVED
IFNB <NAM>,<
XWD SIZ,0>>
GTTSZ:: GTABS SIZT
;DEFINE PROCESSING ROUTINE
DEFINE ACTR (NAM,LOC,SIZ,ROUT,VALUE)<
IFB <NAM>, <SETZM T1> ;;NULL TABLE GIVES NULL ANSWER
IFNB <NAM>,< IFB <ROUT>, <CALL GTGETR> ;;DFAULT PROCESSOR
IFNB <ROUT>, <CALL ROUT> ;;DO SPECIFIED PROCESS
>
>
GTGET: GTABS ACTR ;DEFINE PROCESSING TABLES
;GETAB Job table access routine, used to translate user-specified
;Global job number into local job table index before looking up
;requested data in GTGETR below
; T2/ Global Job number
GTJOB: MOVE T1,T2 ;PUT JOB NUMBER WHERE IT'S EXPECTED
CALL GL2LCL ;TRANSLATE IT
IFNSK. ;If no skip, no such job
SETO T1, ;So return a -1, as documented
RET ;
ENDIF. ;
MOVE T2,T1 ;PUT JOB INDEX WHERE IT'S EXPECTED
;Fall through...
;GENERAL GETTAB ROUTINE.
; 3/ TABLE NUMBER
; 2/ TABLE OFFSET
;RETURNS: +1 WITH T1/ ANSWER
GTGETR: ADD T2,GTTAB(T3) ;GET TABLE BASE
MOVE T1,0(T2) ;FETCH TABLE ENTRY
RET ;AND DONE
;GET THE GLOBAL JOB NUMBER FOR JOB CONTROLLING TTY NUMBER GIVEN
; RETURNS +1, ALWAYS, WITH
; T2/ GLOBAL JOB NUMBER,,WAITING FORK
; OR
; T1/ -1 (NO CONTROLLING JOB)
; OR
; T1/ -2,,-1 (NOT INITIALIZED YET)
;
TTY2GL: CALL GTBTTF ;CALL TTYSRV ROUTINE TO GET JOB INDEX
SKIPGE T1 ;NEGATIVE MEANS NOT THERE (YET)
RET ;SO JUST SAY SO
MOVE T2,T1 ;SAVE REQUESTED DATA
HLRZ T1,T1 ;GET JOB NUMBER FROM LH
CALL LCL2GL ;CONVERT JOB INDEX TO GLOBAL JOB NUMBER
SETOM T1 ;JOB HAS NO GLOBAL JOB NUMBER YET.
MOVSI T1,(T1) ;PUT GLOBAL JOB # IN LH
HRR T1,T2 ;GET WAITING FORK INDEX BACK.
RET ;AND THAT'S IT.
;SUBSYSTEM STATISTICS LOGIC
; 1/ SIXBIT NAME OF SYSTEM PROGRAM BEING RUN OR (PRIV)
; 2/ SIXBIT NAME OF PROGRAM
; SETSN
; RETURN +1: ALWAYS, NAME SET IN STATISTICS TABLE
.SETSN::MCENT
NOINT
MOVE 3,JOBNO
MOVEM 2,JOBPNM(3) ;SET JOB PROGRAM NAME
AOSE SNMLCK ;LOCK TABLE
CBLK1 ;OR WAIT TILL LOCKABLE
MOVM T3,SNMPT ;COUNT OF ENTRIES NOW
DO.
SOJL T3,ENDLP. ;SCAN BACKWARDS, JUMP IF DONE
CAMN 1,@[EP. SNAMES(3)] ;DESIRED NAME?
JRST SNM1 ;YES
JRST TOP.
ENDDO.
MOVM T3,SNMPT
CAIL 3,NNAMES-1 ;TABLE NOW FULL?
SKIPA 1,[SIXBIT /.OTHER/] ;YES, USE CATCH-ALL NAME
JRST [ SETZM @[EP. SCOUNT(3)] ;ZERO THE COUNT
SOS SNMPT ;UPDATE POINTER
JRST .+1] ;CONTINUE WITH FLOW
MOVEM 1,@[EP. SNAMES(3)] ;ADD NAME TO TABLE
SNM1: MOVE 2,JOBNO
HRRM 3,JOBNAM(2) ;PUT INDEX IN JOB TABLE
AOS @[EP. SCOUNT(3)] ;BUMP THE SETSN COUNT
SETOM SNMLCK ;UNLOCK TABLE
OKINT
SMRETN
NR SNMPT,1 ;NEG COUNT OF ENTRIES IN SNAMES
NR SNMLCK,1 ;LOCK FOR SNAMES TABLE
;PROGRAM NAME LOGIC
;SET NAME
; 1/ SIXBIT NAME OF PROGRAM
; SETNM
; RETURN +1: ALWAYS, NAME SET AS PROGRAM NAME FOR JOB
.SETNM::MCENT
MOVE 3,JOBNO ;GET THIS JOB NUMBER
MOVEM 1,JOBPNM(3) ;SET THE NAME
JRST MRETN
;GET NAME
; GETNM
; RETURN +1: ALWAYS, 1/ SIXBIT NAME OF PROGRAM
.GETNM::MCENT
MOVE 1,JOBNO
MOVE 1,JOBPNM(1)
JRST MR1 ;RETURN 1 AC
;GETNAM -- SUBROUTINE TO CONSTRUCT VERSION AND SYSTEM NAME FROM TEXT
; IN THE FILE SYSTEM:MONNAM.TXT, OR IF THE FILE DOES NOT EXIST,
; TO USE THE DEFAULT TEXT ASSEMBLED INTO THE MONITOR IN THE BLOCK
; LABLED TSVN. THE FORMAT OF THE RESULTING TEXT IS:
; V D.DD.DD <TEXT>
; WHERE THE FIRST SEVERAL CHARACTERS IDENTIFY THE MONITOR VERSION AND ALWAYS
; COME FROM THE PREASSEMBLED STRING; AND THE <TEXT> COMES EITHER FROM
; THE FILE OR FROM THE PREASSEMBLED STRING. THE ENTIRE STRING MAY
; BE UP TO 132(10) CHARACTERS LONG, SO <TEXT> MAY BE 122(10),
; OR 172(8) CHARACTERS LONG. <TEXT> IN THE FILE SHOULD BE TERMINATED BY
; EOL.
GETNAM: STKVAR <A1> ;RESERVE SPACE FOR ONE TEMP
MOVE T1,[POINT 7,SVN] ;BYTE POINTER TO DESTINATION
MOVEM T1,A1 ;SAVE UPDATED PTR. TO DEST. STRING
MOVX T1,GJ%SHT!GJ%OLD ;FLAG FOR SHORT GTJFN CALL AND OLD FILE ONLY
HRROI T2,[ASCIZ /SYSTEM:MONNAM.TXT/] ;IMPLICIT STRING PTR TO FILE NAME
GTJFN ;IS THERE A FILE?
JRST GETNA1 ;NO FILE - DOESN'T MATTER WHY
MOVX T2,<OF%RD+FLD(7,OF%BSZ)> ;FILE EXISTS, SET UP OPENF CALL
OPENF ; ..
JRST GETNA1 ;UNSUCCESFUL FOR ANY REASON, USE
; DEFAULT STRING
MOVEI T3,<NSVNT-VTSVNT>*5-1 ;MAX. # OF BYTES WE CAN MOVE
MOVE T4,A1 ;RECALL BYTE PTR TO BUFFER
GETNA2: BIN ;GET NEXT CHARACTER FROM FILE
CAIE T2,.CHCRT ;IS IT A CARRIAGE RETURN?
CAIN T2,.CHLFD ;NO, IS IT A LINE FEED?
JRST GETNA3 ;A CR OR A LF WAS ENCOUNTERED
JUMPE T2,GETNA3 ;JUMP ALSO IF IT'S A NULL
IDPB T2,T4 ;IT'S A GOOD CHARACTER, PUT INTO BUFFER
SOJG T3,GETNA2 ;JUMP IF WE HAVN'T EXHAUSTED ALL BUT
; ONE BYTE POSITION IN BUFFER.
;MANUAL MERGE OF 1B CHANGES
GETNA3: CLOSF ;YES, CLOSE FILE, RELEASE JFN
JFCL ;IGNORE FAILURE
MOVE T1,T4 ;GET STRING POINTER AGAIN
HRROI T2,VTSVN ;IMPLICIT STRING POINTER TO VERSION
SETZ T3, ;STOP ON A NULL
SOUT ;MOVE PREASSEMBLED VERSION TO BUFFER
RET ;EXIT
GETNA1: HRROI T1,SVN ;IMPLICIT BYTE POINTER OF DESTINATION
HRROI T2,TSVN ;IMPLICIT BYTE POINTER TO PREASSEMBLED
; MONITOR NAME
GETNA5: SETZ T3, ;SPECIFY TERMINATION ON A NULL
SOUT ;MOVE PREASSEMBLED STRING TO BUFFER
; THE MOVE INCLUDED A TERMINATING NULL
RET ; SO -- WE'RE DONE
;GET JOB INFORMATION
; 1/ JOB #, OR -1 FOR SELF, OR TTY # + 400000
; 2/ -N,,USER ADR
; 3/ FIRST ENTRY DESIRED
; GETJI
; RETURN +1: FAILURE
; RETURN +2: SUCCESS, ENTRIES STORED IN USER ARRAY
;REQUIRES GETAB CAPABILITY IF JOB OTHER THAN SELF
.GETJI::MCENT
UMOVE P2,3 ;GET NUMBER OF FIRST ENTRY DESIRED
HRL P2,P2 ;DUPLICATE IN BOTH HAVLES
JUMPL P2,[RETERR (GTJIX1)] ;INSURE NOT NEGATIVE
ADD P2,[-NGTJIT,,0] ;SETUP AOBJN PTR TO FIRST ENTRY
JUMPGE P2,[RETERR (GTJIX1)] ;ALREADY BEYOND END OF TABLE
UMOVE P3,2 ;GET USER 'S ADR POINTER
CAMN T1,[-1] ;SELF?
IFNSK. ;IF NO SKIP, -1 WAS SPECIFIED
MOVE T1,JOBNO ;SO GET OUR OWN INDEX
JRST GETJI5 ;AND SKIP CAPABILITY CHECK
ENDIF. ;
MOVX T2,SC%GTB
TDNN T2,CAPMSK ;HAS GETAB CAPABILITY?
RETERR (GTABX3) ;NO
TRZE T1,400000 ;TTY DESIGNATOR?
IFNSK. ;IF NO SKIP, TTY WAS SPECIFIED
CAIL T1,0 ;YES, LEGAL LINE NUMBER ?
CAIL T1,NLINES
RETERR (GTJIX2) ;NO
MOVE T2,T1 ;T2/ LINE NUMBER
CALL GTCJOB ;GET OWNING JOB NUMBER
JRST GETJI6 ;JUMP IF NOT ACTIVE
CAIN T3,-1 ;IS THERE AN OWNING JOB?
JRST GETJI6 ;NO.
MOVE T2,T3 ;YES. PRESERVE JOB NUMBER
HLRZ T3,JOBPT(T2) ;GET CONTROLLING TTY FOR JOB
CAME T3,T1 ;SAME AS GIVEN TTY?
JRST GETJI1 ;NO, TTY IS ASSIGNED NOT CONTROLLING
MOVE T1,T2 ;SETUP JOB INDEX
ELSE. ;OTHERWISE, USER SPECIFIED A JOB NUMBER
CALL GL2LCL ;SO CONVERT IT INTO A JOB INDEX
RETERR() ;CFSSRV WILL RETURN THE RIGHT STUFF
ENDIF. ;FALL THROUGH
;No longer needed. GL2LCL checks job number...
REPEAT 0,<
CAIL 1,0 ;LEGAL JOB NUMBER?
CAIL 1,NJOBS
RETERR (GTJIX3) ;NO
> ;END REPEAT 0
; T1/ Local index of job requested
GETJI5: NOSKED ;DON'T ALLOW JOB TO LOG OUT
SKIPGE JOBRT(T1) ;JOB EXISTS?
RETERR (GTJIX4,<OKSKED>) ;NO. GIVE APPROPRIATE ERROR
MOVEM 1,P1 ;SAVE JOB NUMBER
CALL SETJSB ;MAP IN JSB OF OBJECT JOB
OKSKED ;OK TO ALLOW SCHEDULING. JOB CAN'T LOGOUT
; SINCE ITS JSB IS MAPPED
MOVEM T1,P4 ;SAVE JSB OFFSET
GETJI2: XCT GETJIT(P2) ;GET ITEM
UMOVEM 1,0(P3) ;GIVE IT TO USER (ROUTINES THAT SKIP HAVE ALREADY DONE THIS)
AOBJP P3,GETJI3 ;COUNT USER'S COUNT AND ADR
AOBJN P2,GETJI2 ;COUNT OUR COUNT AND ADR
GETJI3: CALL CLRJSB ;UNMAP JSB OF OBJECT JOB
GETJIX: UMOVEM P3,2 ;UPDATE USERS PTR
SMRETN
;GETJI...
;HERE IF TTY GIVEN AND NO CONTROLLING JOB
;GETJI6 - NO JOB OWNS THIS TERMINAL; GETJI1 - A JOB OWNS THIS TERMINAL
;BUT IT IS NOT THE JOB'S CONTROLLING TERMINAL
GETJI6: SETOM T2 ;INDICATE NO OWNING JOB
SKIPA
GETJI1: TLO 2,(1B1) ;SAY ASSIGNED
GETJI4: XCTU [SKIPE 3] ;DOES USER WANT FIRST ENTRY?
JRST GETJIX ;NO, NOTHING TO DO
SKIPLE T1,T2 ;SKIP IF IT'S NOT A JOB INDEX
IFNSK. ;NO SKIP MEANS IT'S IS A JOB
HRRZ T1,T2 ;Get Rh only (local job index)
CALL LCL2GL ;CONVERT INDEX TO GLOBAL JOB NUMBER
SETOB T1,T2 ;NO GLOBAL JOB NUMBER YET
HLL T1,T2 ;Get back the 'assigned' flag, if any
ENDIF. ;THAT'S ALL
UMOVEM T1,0(P3) ;YES, STORE IT
AOBJN P3,.+1 ;UPDATE HIS POINTER
JRST GETJIX ;RETURN
;TABLE OF GETJI ITEMS - WORD IS EXECUTED TO GET ITEM IN AC1
GETJIT: MOVE T1,GBLJNO(P4) ;User's Global Job Number
HLRE 1,JOBPT(P1) ;TTY NUMBER OR -1 IF DETACHED
CALL GETSN5 ;GET LOGIN DIRECTORY NUMBER
CALL GETSN4 ;GET CONNECTED STRUCTURE,,DIRECTORY
CALL GETSN1 ;SUBSYSTEM NAME
MOVE 1,JOBPNM(P1) ;PROGRAM NAME
MOVE 1,JOBRT(P1) ;RUN TIME
CALL GETSN3 ;JOB NUMBER OF OWNER OF PTY IF ANY
CALL GETRTL ;GET RUNTIME LIMIT OF JOB
CALL GETBB ;GET BATCH BIT
CALL GETJID ;GET DENSITY
LOAD T1,JSMTP,(P4) ;GET MAGTAPE PARITY DEFAULT
CALL GETJIM ;GET MAGTAPE DATA MODE
CALL GETJRS ;GET MAGTAPE RECORD SIZE
LOAD T1,JSDFS,(P4) ;GET DEFERRED SPOOLING BIT
CALL GETSN6 ;GET THE LOGGED IN DIRECTORY NUMBER
CALL GETJSR ;GET SESSION REMARK
MOVE T1,LSTLGN(P4) ;PICK UP LAST LOGIN D&T
MOVE T1,JSSRTM(P4) ;(.JISRT) Get session start runtime
MOVE T1,JSSCTM(P4) ;(.JISCT) Get SESsion start console time
CALL GETT20 ;GET TOPS20 COMMAND LEVEL FLAG
MOVE T1,SRTTIM(P4) ;GET TIME JOB WAS INITIALIZED
MOVE T1,BATSTF(P4) ;GET BATCH STREAM AND FLAGS WORD
CALL GETLL ;GET LOGICAL LOCATION
MOVE T1,P1 ;GET LOCAL JOB INDEX
NGTJIT==.-GETJIT
;ACTION ROUTINES FOR ITEMS NOT AVAILABLE IN SINGLE MOVE
;GET CONNECTED STRUCTURE,,DIRECTORY
;GET CONNECTED STRUCTURE,,DIRECTORY
GETSN4: MOVE T1,P4 ;T1/OFFSET FOR ADDRESSING JSB
CALL GTOJCD ;GET CONNECTED STRUCTURE CODE,,DIRECTORY
RET
;GET LOGGED DIR NUMBER
GETSN5: HRRZ T1,JOBDIR(P1) ;GET DIR NUMBER
SKIPE T1 ;IF NOT LOGGED IN, RETURN 0
HRLI T1,USRLH ;MAKE IT BE A 36 BIT USER NUMBER
RET
;GET -1 OR 0 FOR TOPS20 COMMAND LEVEL OR USER LEVEL
GETT20: LOAD T1,JBT20,(P4) ;GET TOPS20 BIT
MOVN T1,T1 ;BIT ON => -1 (AT TOPS20 COMMAND LEVEL), BIT OFF => 0 (NOT AT T20)
RET
;GET THE LOGGED IN DIRECTORY NUMBER
GETSN6: MOVEI T1,PSNUM ;DIR IS ON PUBLIC STR
CALL STRCNV ;CONVERT IT
RETERR (,<CALL CLRJSB>)
HRLZS T1 ;GET UNIQUE CODE IN THE LEFT HALF
HRR T1,JOBDIR(P1) ;GET THE DIRECTORY NUMBER
RET ;AND RETURN
;GET SUBSYSTEM NAME
GETSN1: HRRZ 1,JOBNAM(P1) ;GET STATISTICS INDEX
MOVE 1,@[EP. SNAMES(1)] ;GET NAME
RET
;GET JOB NUMBER OF OWNER OF PTY
GETSN3: HLRE 1,JOBPT(P1) ;GET CONTROLLING TTY
JUMPL 1,RETO ;RETURN -1 IF DETACHED
CALL PTYGFK ;GET FORK WHICH OWNS PTY
JRST RETO ;NO PTY, RETURN -1
MOVEM 1,FX
LOAD 1,FKJBN ;GET JOB NUMBER WHICH OWNS FORK
CALL LCL2GL ;Convert local Job index into Global Job number
RETERR (,<CALL CLRJSB>) ;No such job/invalid job index
RET
;GET BATCH BIT
GETBB: HLRE T1,JOBPT(P1) ;GET CONTROLING TTY
JUMPL T1,RETZ ;IF NONE, JOB NOT CONTROLLED BY BATCH
CALL PTYGBB ;GET BATCH BIT
JRST RETZ ;NOT A PTY
RET ;ANSWER IS IN T1
;GET MAGTAPE DENSITY
GETJID: LOAD T1,JSMTD,(P4) ;GET DEFAULT DENSITY
SKIPN T1 ;USING SYSTEM DEFAULT?
MOVEI T1,MTDFDN ;YES
RET
;GET MAGTAPE DATA MODE
GETJIM: LOAD T1,JSMTM,(P4) ;GET DEFAULT DATA MODE
SKIPN T1 ;USING SYSTEM DEFAULT
MOVEI T1,MTDFDM ;YES
RET
;GET MAGTAPE RECORD SIZE
GETJRS: LOAD T1,JSMTR,(P4) ;GET RECORD SIZE
SKIPN T1 ;USING SYSTEM DEFAULT?
MOVEI T1,MTDFRS ;YES
RET
;GET RUNTIME LIMIT FOR THIS JOB
GETRTL: LOAD T1,JOBRTP,(P1) ;GET POINTER TO RUNTIME LIMIT BLK
JUMPE T1,R ;WAS NONE
LOAD T1,TIMTIM,(T1) ;GET ACTUAL LIMIT
RET
;GET SESSION REMARK
GETJSR: MOVEI T2,JSSRM(P4) ;ADDRESS OF REMARK IN JSB
GU1: UMOVE T1,0(P3) ;PLACE WHERE USER WANTS REMARK PUT
HRRZ T3,P3 ;GET USER ADDRESS FOR UPDATED POINTER
CALL CPYTU1 ;COPY REMARK TO USER SPACE
RETSKP ;SKIP SO POINTER DOESN'T GET UPDATED TWICE!
;GET LOGICAL LOCATION
GETLL: MOVEI B,LLSR-1(P4) ;ADDRESS OF LOCATION STRING (MINUS ONE FOR CPYTU1)
CALLRET GU1 ;USE STANDARD MAGIC FOR FINISHING UP
;CONVERT ASCIZ PTR TO SIXBIT WORD
; 1/ BYTE PTR TO ASCIZ STRING
; CALL ASZSIX
; RETURN +1: FAILURE, ILLEGAL CHARACTER
; RETURN +2: 1/ WORD OF SIXBIT
; ASCIZ STRING LONGER THAN 6 CHARACTERS IS TRUNCATED
ASZSIX::STKVAR <WSIX> ;DECLARE LOCAL VAR FOR SIXBIT WORD
SETZM WSIX ;CLEAR SIXBIT WORD
MOVE 3,[POINT 6,WSIX]
MOVEI 4,6 ;6 CHARS MAX
SNM3: XCTBU [ILDB 2,1] ;GET CHAR FROM USER
JUMPE 2,SNM4 ;END OF STRING IF NULL
CAIL 2,40 ;LEGAL CHARACTER?
CAIL 2,140
RET ;NO, DO +1 RETURN
SUBI 2,40 ;CONVERT TO SIXBIT
IDPB 2,3 ;BUILD SIXBIT
SOJG 4,SNM3 ;COUNT CHARS
SNM4: MOVE 1,WSIX ;GET SIXBIT
RETSKP
;LIGHTS, SWITCHES, AND OTHER MAINTENANCE STUFF
.SWTCH:: MCENT
MOVE 2,CAPENB
TXNN 2,SC%WHL+SC%OPR+SC%MNT ;SUFFICIENT CAPABILITIES?
JRST CAPXR ;NO
SETZ T1, ;INIT ANSWER
UMOVEM 1,1
SMRETN
.LITES::MCENT
MOVE 2,CAPENB
TRNN 2,SC%WHL+SC%OPR+SC%MNT ;REQUIRES STATUS
JRST CAPXR
SMRETN
.USRIO::MCENT
MOVEI 1,SC%WHL+SC%OPR+SC%MNT
TDNN 1,CAPENB ;REQUIRES STATUS
CAPXR: RETERR(CAPX2) ;RETURN BAD, USER LACKS CAPABILITIES
MOVSI 1,(1B6) ;USER IO BIT
IORM 1,0(P) ;PUT IT ON
SMRETN
;PEEK - AC1: N,,MONLOC
; AC2: USRLOC
.PEEK:: MCENT
MOVEI 3,SC%WHL+SC%OPR+SC%MNT
TDNN 3,CAPENB ;HAS NECESSARY CAPS?
RETERR(CAPX2) ;NO
MOVSI 5,0(1) ;SETUP BLT ARGS - FROM
HRRI 5,0(2) ; .. TO
MOVEI 6,0(2)
HLRZ 3,1 ;COUNT
HRRZ T4,T1 ; FIND MONITOR LIMIT
ADD T4,T3
ADDI 6,-1(3) ; .. TO LIMIT
;CHECK ALL PAGES OF SOURCE BLOCK FOR PROPER ACCESS
MOVEI 1,0(1) ;GET MONITOR ADDRESS
PEEK1: PUSH P,1
MRPAC ;GET ACCESS OF MONITOR PAGE
TLNN T1,-1 ;LEGAL RANGE? ** TO BE CHANGED FOR XADR **
TLNN 2,(PA%RD) ;READABLE?
RETERR(PEEKX2) ;NO
POP P,1
IORI 1,777 ;BUMP ADDRESS TO NEXT PAGE
ADDI 1,1
CAMGE 1,T4 ;CHECKED ALL PAGES?
JRST PEEK1 ;NO, GO CHECK NEXT ONE
UMOVE T3,T2 ;GET TO ADDRESS FROM USER
UMOVE T2,T1 ;GET FROM ADDRESS AGAIN
HLRZ T1,T2 ;FIND SIZE
HRLI T2,MSEC1 ;SECTION 1 IN MONITOR
CALL BLTMU1 ;TRANSFER FROM MONITOR TO USER
SMRETN
;ERROR - SC%WHL OR SC%OPR REQUIRED BUT NOT ENABLED
WHEELX: ITERR(WHELX1)
SUBTTL XPEEK% JSYS
;
; XPEEK% JSYS
;
; AC1: ADDRESS OF ARGUMENT BLOCK
;
.XPEEK::MCENT ;ENTER MONITOR CONTEXT
UMOVE T2,1 ;GET ADDRESS OF ARGUMENT BLOCK FROM USER
UMOVE T1,.XPFNC(T2) ;GET FUNCTION CODE FROM USER
CAILE T1,0 ;FUNCTION CODE WITHIN
CAIL T1,XPTLEN ; VALID RANGE ?
ITERR (ARGX02) ;NO, RETURN "INVALID FUNCTION" ERROR
MOVE T4,XPKTAB(T1) ;GET ADDRESS OF FUNCTION ROUTINE
CALL (T4) ;DISPATCH TO ROUTINE
ITERR () ;FAILED. RETURN ERROR CODE
MRETNG ;SUCCESS. DONE
;
; DISPATCH TABLE FOR XPEEK FUNCTIONS
;
XPKTAB: 0 ;NOT USED
EXP XPPEK ;EXTENDED PEEK FUNCTION
XPTLEN==.-XPKTAB
;
; XPPEEK FUNCTION.
;
; ARGUMENT BLOCK:
;
; WORD DESCRIPTION
;
; 0 LENGTH OF ARGUMENT BLOCK
; 1 FUNCTION CODE - .XPPEK
; 2 NUMBER OF WORDS TO TRANSFER
; 3 NUMBER OF WORDS TRANSFERRED
; 4 ADDRESS OF FIRST LOCATION IN MONITOR
; 5 ADDRESS IN USER SPACE TO TRANSFER TO
;
XPPEK: STKVAR <COUNT,MONLOC>
MOVE Q1,T2 ;SAVE ADDRESS OF USER BLOCK
MOVEI T4,SC%WHL+SC%OPR+SC%MNT
TDNN T4,CAPENB ;HAS NECESSARY CAPS?
ITERR(CAPX2) ;NO
UMOVE T1,.XPABL(Q1) ;GET LENGTH OF ARGUMENT BLOCK
CAIGE T1,.XPLEN ;LONG ENOUGH?
ITERR (ARGX04) ;NO. COMPLAIN
UMOVE T1,.XPCN1(Q1) ;GET WORD COUNT FROM USER
HRRZM T1,COUNT
UMOVE T1,.XPMAD(Q1) ;GET MONITOR ADDRESS FROM USER
HLRZ T2,T1 ;GET MONITOR SECTION
SKIPN T2 ;SECTION GIVEN?
HRLI T1,MSEC1 ;NO. USE SECTION 1 IN MONITOR
MOVEM T1,MONLOC ;SAVE THE MONITOR LOCATION
MOVE T4,T1
ADD T4,COUNT ;FIND MONITOR LIMIT
;CHECK ALL PAGES OF SOURCE BLOCK FOR PROPER ACCESS
XPEEK1: PUSH P,T1 ;SAVE MONITOR ADDRESS
MRPAC ;GET ACCESS OF MONITOR PAGE
TLNN T2,(PA%RD) ;READABLE?
RETERR(PEEKX2) ;NO
POP P,T1 ;RESTORE ADDRESS
IORI T1,777 ;BUMP ADDRESS TO NEXT PAGE
ADDI T1,1
CAMGE T1,T4 ;CHECKED ALL PAGES?
JRST XPEEK1 ;NO, GO CHECK NEXT ONE
UMOVE T3,.XPUAD(Q1) ;GET USER ADDRESS FROM USER
MOVE T2,MONLOC ;GET MONITOR ADDRESS AGAIN
MOVE T1,COUNT ;GET COUNT FROM USER
CALL BLTMU1 ;TRANSFER FROM MONITOR TO USER
SUB T2,MONLOC ;GET NUMBER OF WORDS TRANSFERRED
UMOVEM T2,.XPCN2(Q1) ;RETURN COUNTS
RETSKP ;DONE. SUCCESS
;DETACH FROM CONTROLLING TTY
.DTACH::MCENT
SKIPGE T1,CTRLTT ;GET CONTROLLING TERMINAL
MRETNG ;NONE, ASSUME OK
CALL PTYGBB ;ARE WE CONTROLLED BY BATCH?
IFSKP.
ANDL. T1
MOVX T1,SC%WHL!SC%OPR ;IF CONTROLLED BY BATCH,
TDNN T1,CAPENB ;MUST HAVE WHEEL OR OPR
ITERR (CAPX1) ;NOT ENOUGH PRIVILEGES
ENDIF.
MOVX T1,.CTTRM ;FINISH OUTPUT ON CONTROLLING TERMINAL
DOBE ; BECAUSE TTYDAS WILL RELEASE BUFFERS
ERJMP .+1 ;IGNORE ERRORS
MOVE P1,CTRLTT ;SAVE LINE NUMBER
CALL LDTACH ;DO THE WORK
MOVE T1,JOBNO
HRRE T1,JOBDIR(T1)
IFN. T1 ;IF LOGGED IN,
MOVE T2,P1 ;T2/ LINE NUMBER
CALL DETMSG ;YES. NOTE EVENT ON LOGGING TERMINAL
ENDIF.
MRETNG ;AND ALL DONE
;DTACH CALLED INTERNALLY
LDTACH: STKVAR <LDTALN,TSTRTN> ;Detach Line Number, Test Routine Address
LDTAC2: SKIPGE T2,CTRLTT ;DOES JOB HAVE A CONTROLLING TERMINAL?
RET ;NO. DON'T DO ANYTHING
HRLOI T1,(TL%CRO+TL%COR+TL%SAB+TL%ABS)
CAMN T2,CTYLNO ;Detaching CTY?
TXZ T1,TL%ABS ;Always leave CTY refusing links
MOVEI T2,-1
TLINK ;BREAK LINKS
JFCL
CALL LCKDVL ;LOCK DEVICE LOCK, NO NOINT
SKIPGE T2,CTRLTT ;GET CONTROLLING TTY
IFNSK. ;ITS GONE NOW
UNLOKK DEVLKK ;NOT THERE, RELEASE DEVLKK
MOVEM T1,TSTRTN ;SAVE TEST ROUTINE ADDR
MOVE T2,LDTALN ;MIGHT BE DYNAMIC DATA LOCKED BY SOME JSYS
MOVEI T3,"C"-100 ;SO GIVE JOB A ^C AND HOPE
CALL TTPSRQ ;WONT HELP IF TRAPPING ^C
MOVE T1,TSTRTN ;PUT ADDRESS BACK
OKINT ;GO OKINT AND
RET ;RETURN
ENDIF. ;HERE WHEN CTRLTT IS STILL THERE
MOVEM T2,LDTALN ;SAVE LINE NUMBER
CALL STADYN ;POINT TO DYNAMIC DATA
JRST LDTAC3 ;NOT ACTIVE. SHOULDN'T HAPPEN
CALL TTFWAK ;WAKE UP PROCESS IN INPUT WAIT ON THIS LINE
MOVE T2,LDTALN ;T2/ LINE NUMBER
CALL TTYDAS ;DEASSIGN DYNAMIC DATA
JRST [ UNLOKK DEVLKK ;FAILED - UNLOCK DEVICE LOCK
OKINT ;LCKDVL WENT NOINT
TXZN T1,1B0 ;ERROR OR WAIT?
RET ;ERROR. CURRENTLY NO WAY TO HANDLE THIS
HRL T1,LDTALN ;T1/(LINE NUMBER,,ADDRESS OF TEST ROUTINE)
MDISMS ;WAIT UNTIL DEALLOCATION IS POSSIBLE
JRST LDTAC2] ;TRY AGAIN
LDTAC3: SETOM CTRLTT ;INDICATE JOB DOESN'T HAVE CONTROLLING TERMINAL
MOVE T1,JOBNO
HRROS JOBPT(T1)
UNLOKK DEVLKK ;UNLOCK DEVICE LOCK
OKINT
RET
;LDET2 - DETACH JOB FROM TERMINAL WITHOUT DEALLOCATING TERMINAL DATA
;RETURNS +1: ALWAYS
;PRESERVES T2
LDET2: STKVAR<LDETSV>
HRLOI T1,(TL%CRO+TL%COR+TL%SAB+TL%ABS)
MOVE T2,CTRLTT ;GET CONTROLLING TERMINAL
CAMN T2,CTYLNO ;Check for CTY
TXZ T1,TL%ABS ;CTY should default to refuse links
MOVEI T2,-1
TLINK ;BREAK LINKS
JFCL
CALL UNPAGE ;CLEAR PAGING
MOVE 2,CTRLTT ;T2/ CONTROLLING TERMINAL NUMBER
MOVEM T2,LDETSV ;SAVE IT
MOVE 1,JOBNO
HRRE T1,JOBDIR(T1) ;GET LOGGED IN DIRECTORY
CAIE T1,0 ;LOGGED IN?
CALL DETMSG ;YES, DO MESSAGE AND EFACT
SETOM CTRLTT ;INDICATE NO CONTROLLING TERMINAL
MOVE T1,JOBNO ;GET JOB NUMBER
HRROS JOBPT(T1) ;INDICATE NO CONTROLLING TERMINAL
MOVE T2,LDETSV ;T2/ LINE NUMBER
CALL LCKTTY ;POINT TO DYNAMIC DATA
SKIPA ;NOT ACTIVE
CALL TTFWAK ;WAKE FORK IN INPUT WAIT ON THIS LINE
CALL ULKTTY ;ALLOW DEALLOCATION
MOVE T2,LDETSV ;RESTORE LINE NUMBER
RET
;ROUTINE TO TURN OFF PAGE MODE FOR CONTROLLING TERMINAL.
;CLOBBERS A AND B
UNPAGE: MOVEI A,.PRIOU ;THE CONTROLLING TERMINAL
MOVEI B,.MOXOF ;CLEAR PAUSE ON END
SETZM C
MTOPR ;DO IT
ERJMP .+1 ;ignore errors
RET ;AND DONE
;PROCEDURE TO HANDLE DATASET CARRIER OFF OR PTY CLOSED.
;DETACH JOB IMMEDIATELY, LOGOUT AFTER 5 MINUTES IF NOT REATTACHED.
;INVOKED ON REQUEST BY PSI SERVICE
JOBCOF::SKIPGE SLOWF ;IN JSYS CONTEXT?
JRST [ MCENTR ;NO, GET THERE - FFL and FPC setup by PSI
PUSH P,[IFIW!MRETN] ;SETUP RETURN
JRST .+1]
SAVEAC <CX> ;SAVE CX BEFORE ACSAV SMASHES IT
ACSAV
STKVAR <CFFFL,CFFPC>
MOVE T1,FFL ;GET CONTENTS OF FFL
MOVEM T1,CFFFL ;SAVE IT
MOVE T1,FPC ;GET CONTENTS OF FPC
MOVEM T1,CFFPC ;SAVE IT
MOVE 1,JOBNO
SKIPGE B,CTRLTT ;HAVE A CONTROLLING TTY?
JRST JOBCF1 ;NO
CALL GTCJOB ;GET ITS OWNING JOB
JRST JOBCF2 ;NONE. GO ON
CAIN C,0(A) ;SAME AS THIS ONE?
JRST JOBCF1 ;YES. GO ON
JOBCF2: SETOM CTRLTT ;NO. CLEAR THIS ASSIGNMENT
MOVE T1,JOBNO
HRROS JOBPT(T1) ;ALSO CLEAR CONTROLLING TTY HERE
JOBCF1: CALL LDTACH ;DO LOCAL DETACH
MOVE T1,JOBNO
HRRZ 1,JOBDIR(1) ;SEE IF NOW LOGGED IN
IFE. T1
MOVX T1,USRCTX ;NO, RESET STACK AND LOGOUT
MOVEM T1,FFL
SETZM FPC
JRST FLOGO
ENDIF.
MOVE T1,BITS+.TICRF ;CHECK TO SEE WHAT THE TOP FORK THINKS
TDNE T1,TTSPSI ; OF TAKING A CARRIER OFF INTERUPT
JRST JOBCF3 ;IT THINKS SO, SO LET IT TRY
CALL FFORKI ;INDIRECTLY FREEZE ALL INFERIORS
MOVE T1,COFTIM ;SETUP TO WAIT
CALL SETBKT ;COMPUTE BLOCKT DATA
HRRI 1,COFTST ;SETUP SPECIAL TEST
MOVSI T2,FHV1 ;LOW BLOCK PRIORITY
HDISMS
MOVE 1,JOBNO ;SEE IF NOW ATTACHED
SKIPL JOBPT(1)
IFSKP.
MOVX T1,USRCTX ;NO, LOGOUT THE JOB
MOVEM T1,FFL
SETZM FPC
MCENTR ;RESET STACK, INIT JSYS CONTEXT
MOVE T1,JOBNO
HRRZ T1,JOBDIR(T1) ;DIRECTORY
JUMPE T1,FLOGO1 ;DONT CHECK IF NOT LOGGED IN
HRLI T1,USRLH
CALL CNVDIR ;GET THE NUMBER OF THAT DIRECTORY
GTDAL ;GET ALLOCATION
ERJMP FLOGO1 ;DONT TRY ACJ IF THERE IS AN ERROR
SETOM T1 ;FAKE A LOGOUT WITH -1 AS ARG
GTOKM (.GOLGO,<T2,T3,T1>,FLOGO1) ;ASK ACJ, BUT IN ANYCASE,
;LOG OUT THIS USER. (THIS IS ONLY TO BE NICE
;TO ACJ, WHO MAY NOT BE NICE TO US)
JRST FLOGO1
ENDIF.
NOINT ;KEEP CONTROL
HLRZ T2,JOBPT(T1) ;GET CONTROLLING TTY
MOVEI T3,"C"-100 ;FAKE A CONTROL-C
CALL TTPSRQ ;""
CALL RFORKI ;RESUME ALL INDIRECTLY FROZEN INFERIORS
OKINT ;ALLOW INTS AGAIN
JOBCF3:
MOVE T1,CFFFL ;GET OLD FFL
MOVEM T1,FFL ;RESTORE IT
MOVE T1,CFFPC ;GET OLD FPC
MOVEM T1,FPC ;RESTORE IT AS WE MAY HAVE DONE SOME OTHER JSYS
RET
;SCHEDULER TEST FOR ABOVE. WAITS UNTIL JOB ATTACHED OR SPECIFIED TIME
;ELAPSED
RESCD
COFTST: LOAD 2,FKJBN ;GET JOB NUMBER
SKIPL JOBPT(2) ;NOW ATTACHED?
JRST 1(4) ;YES, WAKEUP
JRST BLOCKT ;NO, GO TEST TIME
SWAPCD
;ATTACH JOB TO TTY
;ACCEPTS:
; T1/ FLAGS,,JOB NUMBER TO ATTACH TO
; T2/ USER NUMBER OF JOB IN AC 1
; T3/ POINTER TO PASSWORD STRING
; T4/ DESIGNATOR FOR TERMINAL TO BE USED IF AT%TRM FUNCTION OF 1
; IS ON.
; ATACH
;RETURN +1: FAILURE, ERROR CODE IN 1
;RETURN +2: SUCESS.
.ATACH::MCENT
SAVEAC <Q1,Q2,FX> ;DEFINE ALL Q'S TO USE AS WORK REGS
STKVAR <ATACJN,ATACDR,ATACLN,ATACUN>
MOVEM T2,ATACUN ;STASH THE USER NUMBER
UMOVE Q1,1 ;BITS MODIFYING THE ATACH
TXNE Q1,AT%TRM ;PROXY ATTACH
JRST ATACH1 ;YES. DO NOT CARE ABOUT USER NUMBER
HLRZ T3,T2 ;GET UNIQUE CODE OF USER NUMBER
CAIE T3,USRLH ;IS THIS A LEGAL USER NUMBER?
RETERR (ATACX3) ;NO, GIVE ERROR RETURN
ATACH1: MOVEI T1,0(T1) ;GET OBJECT JOB NUMBER
JUMPE T1,[RETERR (ATACX1)] ;CAN'T ATTACH TO JOB 0
CALL GL2LCL ;TRANSLATE GLOBAL JOB NUMBER TO LOCAL INDEX
RETERR() ;LET CFS REPORT THE ERROR
MOVEM T1,ATACJN ;SAVE JOB NUMBER TO ATTACH TO
; CAIGE T1,NJOBS ;REASONABLE JOB NUMBER? - GL2LCL CHECKS THIS
SKIPGE JOBRT(T1) ;AND JOB EXISTS?
ATACH5: RETERR(ATACX1) ;NO
TXNN Q1,AT%TRM ;PROXY ATTACH
IFNSK. ;IF NOT
CAMN T1,JOBNO ;TRYING TO DO HIS JOB?
RETERR (ATACX2) ;YES. ERROR
ELSE.
UMOVE FX,4 ;GET TTY NUMBER TO ATACH THE JOB TO
ANDI FX,377777 ;JUST LINE NUMBER PART
SKIPG FX ;VALID TTY NUMBER?
RETERR (ATACX7) ;NO, FAIL
CAIL FX,NLINES ;EXISTANT LINE?
RETERR (ATACX1) ;NO. FAIL.
ENDIF.
HRRZ T3,JOBDIR(T1) ;DIRECTORY OF OTHER JOB
MOVEM T3,ATACDR ;SAVE DIRECTORY NO. FOR FACT FILE
CAIE T3,0(T2) ;SAME AS SPECIFIED?
RETERR(ATACX3) ;NO
SKIPL T1,CTRLTT ;GET CONTROLLING TERMINAL
CALL PTYGBB ;ARE WE CONTROLLED BY BATCH?
SKIPA ;NO, CONTINUE
JUMPL T1,[MOVX T1,SC%WHL!SC%OPR ;IF CONTROLLED BY BATCH,
TDNN T1,CAPENB ;MUST HAVE WHEEL OR OPR
RETERR(CAPX1) ;NOT ENOUGH PRIVILEGES
JRST .+1] ;OK, CONTINUE
; ..
; ..
;SEE IF USER CAN LEGALLY ATTACH OTHER JOB. ATTACH IS LEGAL IF
;BOTH JOBS ARE SAME USER, IF THIS USER IS SC%WHL, OR IF
;USER GIVES PROPER PASSWORD
;ALSO, ATACH IS LEGAL IF JOB BEING ATTACHED IS OWNED BY THE
;SAME USER AS THE OWNER OF THE PTY CONTROLLING THE JOB DOING THE
;ATACH AND THE JOB DOING THE ATACH IS NOT YET LOGGED IN.
;ALSO, IF OWNER OF PTY IS AN ENABLED WHEEL OR OPR, JOB
;ON PTY MAY ALWAYS DO ATACH.
;ALSO, LEGAL IF OBJECT JOB IS OWNED BY ATACH-ER, DUE TO CRJOB.
;IN ADDITION, ATTACHING TO A JOB CONTROLLED BY BATCH IS ILLEGAL
;WITHOUT BEING LOGGED-IN WITH WHEEL OR OPR PRIVS ENABLED.
HRRZ T1,Q1 ;Get object Global job number
MOVX T2,<-1,,T4> ;GETJI ARGUMENT POINTER
MOVX T3,.JIBAT ;SEE IF UNDER CONTROL OF BATCH
GETJI ;GET THE INFORMATION
SETZ T4, ;CONTINUE, CATCH THIS LATER
JUMPL T4,[MOVE T2,JOBNO ;BATCH JOB. USER MUST BE LOGGED-IN
MOVX T1,SC%WHL!SC%OPR ; WITH WHEEL OR OPR ENABLED
SKIPE JOBDIR(T2) ;TEST LOGIN
TDNN T1,CAPENB ;IS LOGGED-IN, TEST CAPS
RETERR (CAPX1) ;NOT GOOD ENOUGH
JRST .+1] ;OK, CONTINUE IN-LINE
TXNE Q1,AT%NAT ;DOING ATACH OR UNATTACH?
IFSKP. ;IF ATTACH
HRRZ T4,CTRLTT ;ASSUME THIS IS THE TTY #
TXNE Q1,AT%TRM ;IS IT A PROXY?
MOVE T4,FX ;YEP
HRRZ T3,Q1 ;Get global job number
GTOKM (.GOATJ,<T3,T4>,[RETERR()]) ;LET ACJ SNIFF THIS
ENDIF.
MOVE T3,ATACDR ;REFETCH OTHER USER NUMBER
MOVE T2,JOBNO ;GET THIS JOB NUMBER
HRRZ T2,JOBDIR(T2) ;GET USER NUMBER FOR THIS JOB
CAMN T2,T3 ;SAME AS OTHER JOB?
JRST ATACH3 ;YES, NO FURTHER LEGALITY CHECKS
JUMPN T2,ATACH6 ;PTY OWNER IS IRRELEVANT IF NOT LOGGED IN
MOVE T1,CTRLTT ;SEE IF I AM ON A PTY
JUMPL T1,ATACH6 ;JUMP IF NO CONTROLLING TTY
CALL PTGETJ ;GET CONROLLING JOB # OR -1
JUMPL T1,ATACH6 ;NON-PTY DOING THE ATACH IF -1
HRRZ T4,JOBDIR(T1) ;T4 GETS OWNER OF PTY
XCTU [HRRZ T3,T2] ;GET OWNER OF JOB BEING ATACHED
CAMN T3,T4 ;THE SAME?
JRST ATACH3 ;YES, SO NO PASSWORD NEEDED
CALL GJCAPS ;GET CAPABILITIES OF OWNER OF PTY
TXNE T1,SC%WHL+SC%OPR ;PRIVILEGED?
JRST ATACH3 ;YES, SO NO PASSWORD NEEDED
ATACH6: MOVE T3,ATACDR ;GET DIR NUMBER
MOVEI T1,SC%WHL+SC%OPR
TDNE T1,CAPENB ;THIS USER HAS CAPS?
JRST ATACH3 ;YES, NO FURTHER CHECKS
MOVE T1,ATACJN ;SEE IF I OWN THE JOB
HRRZ T1,JOBONT(T1) ;OWNER FIELD
CAMN T1,GBLJNO ;IS IT ME?
JRST ATACH3 ;YES, THEN IT'S LEGAL.
UMOVE T1,2 ;GET USER NUMBER FOR PASSWORD CHECK
CALL CNVDIR ;GET USER'S LOGGED-IN DIRECTORY NUMBER
UMOVE T2,T3 ;GET PTR TO PASSWORD STRING
TRNE T3,-1 ;FAIL IF JOB NOT LOGGED IN
CALL PASSWC ;PROPER PASSWORD?
JRST [ SKIPN T1 ;NO, NEED TO SLEEP?
CALL PASPEN ;YES
RETERR(ATACX4)] ;NOW BOMB OUT
;USER HAS PROVEN RIGHT TO DO THIS. THE FOLLOWING DATA IS AVAILABLE:
; JOBNO/ JOB NUMBER OF CALLER OF JSYS
; CTRLTT/ TERMINAL AT WHICH CALLER IS RUNNING
; ATACJN/ JOB NUMBER TO BE ATTACHED TO THIS TERMINAL
;USER WANTS TO ASSOCIATE THE JOB IN ATACJN WITH THE TERMINAL IN CTRLTT
;IF THE JOB IS CURRENTLY ATTACHED, IT MUST BE DETACHED FIRST
ATACH3: TXNE Q1,AT%TRM+AT%NAT ;IS MY TTY TO BE USED?
JRST ATACH9 ;NOT BY DEFAULT, ANYWAY.
SKIPGE FX,CTRLTT ;YES. GET MY TTY
RETERR ATACX2 ;I DON'T HAVE ONE. FAIL.
ATACH9: TXNN Q1,AT%TRM ;USING A DIFFERENT LINE?
JRST ATACHB ;NO
HRRZ T2,FX ;YES, BETTER ASSIGN SOME DYNAMIC DATA
NOSKED ;PREVENT STATE CHANGES
CALL GTCJOB ;GET CONTROLLING JOB
IFSKP. ;IF ACTIVE
CAIE T3,777777 ;UNASSIGNED?
CAMN T3,JOBNO ;THIS JOB?
SKIPA ;UNASSIGNED OR ASSIGNED TO THIS JOB
RETERR (DEVX2,<OKSKED>)
ENDIF.
CALL TTYASC ;ASSIGN AS CONSOLE
RETERR(,<OKSKED>)
OKSKED
ATACHB: MOVE T1,ATACJN ;GET BACK OBJECT JOB NUMBER
CALL MAPJSB ;SETUP OTHER JOB'S JSB
RETERR(ARGX08) ;NO SUCH JOB
MOVEI Q2,0(T1) ;SAVE OFFSET FOR OTHER JOB'S JSB
SKIPGE T2,CTRLTT(Q2) ;OTHER JOB NOW ATTACHED?
JRST ATACH2 ;NO. DON'T DETACH IT
;OBJECT JOB IS ATTACHED. DETACH IT FROM ITS CURRENT CONTROLLING
;TERMINAL AND DEALLOCATE THAT TERMINAL'S DATA
MOVEM T2,ATACLN ;SAVE ITS CONTROLLING TERMINAL
CALL LCKDVL ;LOCK DEVICE LOCK, GO NOINT
NOSKED ;MUST DETACH IT FIRST
CALL STADYN ;POINT TO DYNAMIC DATA
JRST ATACH7 ;NOT ACTIVE. DON'T DEASSIGN IT
CALL TTFWAK ;WAKE FORK IN INPUT WAIT ON THIS LINE
MOVE T2,ATACLN ;T2/ LINE NUMBER
CALL TTYDAS ;DEASSIGN THE LINE
JRST [ PUSH P,T1 ;SAVE THE ERROR CODE
OKSKED
CALL CLRLFK ;UNMAP THE JSB
UNLOKK DEVLKK ;UNLOCK DEVICE LOCK
OKINT ;LCKDVL WENT NOINT
POP P,T1 ;GET THE CODE BACK
TXZN T1,1B0 ;NEED TO WAIT?
RETERR ;NO. RETURN FAILURE
HRL T1,ATACLN ;T1/(LINE NUMBER,,ADDRESS OF TEST ROUTINE)
MDISMS ;WAIT UNTIL DEALLOCATION IS POSSIBLE
JRST ATACH3] ;TRY AGAIN
ATACH7: SETOM CTRLTT(Q2) ;INDICATE JOB HAS NO CONTROLLING TERMINAL
MOVE T1,ATACJN ;GET OBJECT JOB NUMBER
HRROS JOBPT(T1) ;NO CONTROLLING TERMINAL AGAIN
OKSKED
UNLOKK DEVLKK ;UNLOCK DEVICE LOCK
OKINT ;LCKDVL WENT NOINT
MOVE T2,ATACLN ;T2/ LINE NUMBER OF DETACHED JOB
MOVE T3,JOBNO ;GET THIS JOB NUMBER
HRRZ T3,JOBDIR(T3) ;GET USER NUMBER FOR THIS JOB
HRLI T3,USRLH ;MAKE IT BE A USER NUMBER
MOVE T4,CTRLTT ;AND TTY # OF DETACHER
HRRZ T1,Q1 ;Get the global job number of object
CALL DETMS1 ;TELL JOB IT'S BEING DETACHED
; ..
;OBJECT JOB HAS BEEN DETACHED. DETACH CALLER FROM CONTROLLING TERMINAL
;AND ATTACH OBJECT JOB TO THAT TERMINAL. DON'T DEALLOCATE THE DYNAMIC
;DATA FOR THE TERMINAL
;..
ATACH2: TXNE Q1,AT%NAT ;REQUESTED NO ATTACH?
JRST ATACH4 ;YES
MOVEM FX,ATACLN ;NO, MAKE SURE LINE RIGHT
MOVE T2,FX ;prepare for LDET2
NOINT ; ..
CAMN FX,CTRLTT ;NEED TO GIVE AWAY MY TERMINAL?
CALL LDET2 ;YES, DETACH THIS JOB BUT KEEP DYNAMIC DATA
NOSKED
;ASSIGN OBJECT JOB TO CORRECT TERMINAL
MOVE T4,ATACJN ;GET OBJECT JOB
MOVEM FX,CTRLTT(Q2) ;SET CTRLTT IN DEST JOB
HRLM FX,JOBPT(T4)
MOVEI T1,.TTDES(FX) ;T1/ DEVICE DESIGNATOR FOR TERMINAL
CALL CHKDES ;GET INDEX TO DEVICE TABLES
BUG.(HLT,TTBAD1,MEXEC,soft,<BAD DEVICE DESIGNATOR FOR TERMINAL AT ATACH2>,,<
Cause: The call to CHKDES failed. This should not happen, since the terminal
number involved comes from Q3, which is either the number of terminal
controlling the job, or a user-supplied terminal number from the user's
AC4. If a user-supplied number is being used, it was range-checked by
comparing it to NLINES. If it is the number of the controlling
terminal, the job was already verified to be attached somewhere, so
this BUGHLT should not occur.
>)
MOVE T1,ATACJN ;GET OTHER JOB NUMBER
HRLM T1,DEVUNT(T2) ;INDICATE OTHER JOB OWNS THE TERMINAL
MOVE T2,ATACLN ;T2/ TERMINAL NUMBER
MOVE T1,TTSPSI(Q2) ;T1/ INTERRUPT WORD FOR OTHER JOB
MOVE T3,TTSDPS(Q2) ;T3/ DEFERRED INTERRUPT WORD FOR OTHER JOB
CALL TTSINT ;SET INTERRUPT WORDS FOR THIS TERMINAL
MOVE T1,ATACJN ;T1/ OTHER JOB
CALL STCJOB ;SET THIS AS CONTROLLING THE TERMINAL
OKSKED
OKINT
CALL CLRLFK ;CLEAR MAPPING OF JSB
HRRZ T1,Q1 ;Get the global job number of object
MOVE T2,ATACLN ;SET UP JOB/LINE INFO
CALL ATAMSG ;DO LOGGING STUFF
MOVE T1,JOBNO
HRRE T1,JOBDIR(T1)
JUMPE T1,LOGO ;VANISH IF NOT LOGGED IN
SMRETN
;HERE IF CALLER REQUESTED "NO ATTACH", I.E. DETACHING REMOTE JOB
ATACH4: CALL CLRLFK ;CLEAR MAPPING OF JSB
HRRZ T1,Q1 ;Get the global job number of object
MOVE T2,ATACLN ; AND LINE #
CALL DETMS0 ;DO LOG MSG AND FACT FILE ENTRY
SMRETN
ENDSV. ;END STKVAR
;USAGE UTILITIES FOR JOB 0
;USAGE VARIABLES
NR CKPGID,1 ;PAGE IDENT OF CURRENT MAPPED PAGE UN CHECKPOINY FILE
;INIT USAGE DATA BASE
USGINI: SAVEAC <Q1,Q2,FX> ;PRESERVE ALL TEMP WORK REGS
STKVAR <CKPNJ,CKIDNT>
SETOM USGLOK ;CLEAR LOCKS
SETZM USQCNT ;EMPTY QUEUE
SETZM USGBEG ;INIT QUEUE
MOVEI T1,USGBEG-1
MOVEM T1,USGEND ;TO BE EMPTY
SETZM USGEOF ;INIT EOF POINTER
SETZM CKPJFN ;NO JFN'S YET
SETZM USGJFN ;...
SETZM CKPGID ;NO PAGE MAPPED
MOVE T1,TODCLK ;SETUP FIRST CHECKPOINT INTERVAL
ADD T1,CKPINV
MOVEM T1,CKPTIM ;TIME FOR FIRST CHECKPOINT
MOVX T1,SF%CDE ;FILE SYSTEM OK?
TDNE T1,FACTSW
JRST [ TMSG <? System accounting will not be done due to file system errors
>
RET]
USGIN1: HRROI T2,USGFIL ;FILESPEC FOR USAGE FILE
CALL USGOPN ;OPEN FILE
JRST [ CALL CRUSGF ;NONE - CREATE USAGE FILE
BUG.(HLT,UXXCRE,MEXEC,soft,<CANNOT CREATE USAGE FILE>,,<
Cause: If the GTJFN (GJ%PHY,GJ%OLD) or the OPENF (OF%RD,OF%WR,
OF%RTD) on the file pointed to by CKPFIL (PS:[ACCOUNTS]
CHECKPOINT.BIN.1) fails, then another GTJFN (GJ%FOU) and OPENF
(OF%WR) is attempted in order to create a new checkpoint file.
If these latter GTJFN and OPENF fail, the UXXCRE BUGHLT occcurs.
Action: Analyze the error code from the failing JSYS, and fix the
checkpoint file so that the error does not happen.
>)
JRST USGIN1] ;TRY AGAIN
MOVEM T1,USGJFN ;STORE JFN
TXO T1,CO%NRJ ;RETAIN JFN
CLOSF ;THIS SHOULD CORRECT PAGE COUNT
JFCL ;SHOULDN'T HAPPEN
MOVX T2,44B5+OF%RD!OF%WR!OF%RTD
MOVE T1,USGJFN ;FETCH JFN
OPENF ;OPEN FOR REAL NOW
BUG.(HLT,UXXOPN,MEXEC,soft,<UNABLE TO OPEN USAGE FILE>,,<
Cause: USGINI invoked OPENF (OF%RD,OF%WR,OF%RTD), which failed to open the
file pointed to by USGFIL, probably PS:[ACCOUNTS]SYSTEM-DATA.BIN.
>)
HRRZ T1,T1 ;GET RID OF OPEN FLAGS
FFFFP ;FIND-FIRST-FREE-FILE PAGE
HRRZ Q1,T1 ;SAVE PAGE NUMBER
MOVE T1,USGJFN ;JFN AGAIN
MOVE T2,[1,,.FBBYV] ;GET PAGE COUNT
MOVEI T3,T4 ; INTO T4
GTFDB
HRRZS T4 ;PAGE # ONLY
CAME Q1,T4 ;CORRECT NUMBER
BUG.(INF,USGHOL,MEXEC,HARD,<LOST PAGE(S) IN USAGE FILE>,,<
Cause: This BUG is not documented yet.
Action:
>)
JUMPE Q1,USGIN4 ;EMPTY FILE IF 0
USGIN2: SETZ Q2, ;INIT TO WORD 0
JUMPL Q1,USGIN3 ;MUST BE EMPTY IF NONE LEFT
SOS T1,Q1 ;WANT LAST PAGE
HRL T1,USGJFN ; FROM USAGE FILE
MOVX T2,PM%RD ;READ ONLY
CALL USGMAP ;MAP PAGE
MOVEI Q2,777 ;SCAN BACK FROM END OF PAGE
SKIPN T1,FPG0A(Q2) ; FOR FIRST NON-ZERO WORD
SOJGE Q2,.-1 ;...
AOJE Q2,[SOJA Q1,USGIN2] ;PAGE WAS ALL ZEROS
;ADJUST COUNT TO FIRST AVAIL WORD
;..
;..
USGIN3: IMULI Q1,PGSIZ ;CALC EOF POINTER
ADD Q1,Q2
USGIN4: MOVEM Q1,USGEOF ;SETUP LOC
;CHECKPOINT INIT
USGIN5: HRROI T2,CKPFIL ;FILE NAME FOR CHECKPOINT
CALL USGOPN ;OPEN IT
JRST [ CALL CRCKPT ;NON-EX CREATE NEW ONE
BUG.(HLT,UXXCKP,MEXEC,soft,<COULDN'T CREATE CHECKPOINT FILE>,,<
Cause: The file PS:[ACCOUNTS]CHECKPOINT.BIN.1 could not be referenced
for one reason or another. The code first attempts a GTJFN (GJ%PHY,
GJ%OLD) and an OPENF (OF%RD,OF%WR,OF%RTD), one of which must fail
for UXXCKP to be a possibility.
After the above GTJFN or OPENF has failed, then a GTJFN (GJ%PHY,GJ%NEW)
is attempted. If this succeeds, then UXXCKP will occur if a failure
happens on one of the following: the subsequent OPENF (OF%WR,OF%RD),
the call to ASGSWP to allocate CKPSIZ words, or the SOUT writing
CKPSIZ words to the checkpoint file.
If the GTJFN (GJ%PHY,GJ%NEW) fails, then another GTJFN (GJ%PHY,GJ%DEL)
is attempted, and its failure will cause UXXCKP. If this GTJFN
succeeds, however, then a CHFDB (turning off FB%DEL to undelete the
file) is done, and its failure will also cause UXXCKP.
Action: Use EDDT to patch the system so that you can bring up the system
without the checkpoint file being referenced. Then get the checkpoint
file into a state such that none of the above failures will occur.
>)
JRST USGIN5]
MOVEM T1,CKPJFN ;SAVE JFN
HRLZS T1 ;START AT PAGE 0
MOVEM T1,CKIDNT ;SAVE IDENT
MOVX T2,PM%RD
CALL USGMAP ;MAP PAGE
MOVE Q1,FPG0A+1 ;GET # OF JOBS IN FILE
ERJMP CKPBAD ;IF NON-EX PAGE, FILE IS BAD
MOVE T1,FPG0A+3 ;SIZE OF CHECKPOINT RECORD
CAIN T1,CKPSIZ ;BETTER BE SAME
CAIGE Q1,NJOBS ;.GE. MAX JOBS IN MONITOR
CKPBAD: JRST [ BUG.(INF,UXXFIT,MEXEC,HARD,<CHECKPOINT FILE NOT IN CORRECT FORMAT FOR THIS SYSTEM, REBUILDING...>,,<
Cause: This BUG is not documented yet.
Action:
>)
CALL UNMAPC
MOVE T1,CKPJFN ;CLOSE AND DELETE (EXPUNGE)
TXO T1,CO%NRJ
CLOSF
JFCL
MOVE T1,CKPJFN
TXO T1,DF%EXP
DELF
JFCL
SETZM CKPJFN
JRST USGIN5] ;START OVER FOR CHECKPOINT
MOVEM Q1,CKPNJ ;SAVE NUMBER OF JOBS IN FILE
MOVE T1,FPG0A+2 ;GET DATE/TIME OF LAST CHECKPOINT
MOVEM T1,CKPDTL ;SAVE
SKIPN USGEOF ;USAGE FILE EMPTY?
JRST USGI6B ;YES - SKIP THIS
HRLZ T1,CKPJFN ;START AT PAGE 0 AGAIN
USGIN6: MOVEI Q2,PGSIZ/CKPSIZ ;NUMBER OF JOBS/PAGE
SETZ FX, ;INIT OFFSET
MOVX T2,PM%RD
MOVEM T1,CKIDNT ;SAVE IDENT
CALL USGMAP
SKIP FPG0A ;TEST PAGE FOR GOODNESS
ERJMP CKPBAD ;NOT GOOD IF INTERRUPT TAKES
USGI6A: SKIPLE T4,FPG0A(FX) ; .GT. 0 MEANS WRITE IN PROGRESS
MOVEM T4,USGEOF ;THIS IS ACTUAL USGEOF
ADDI FX,CKPSIZ ;STEP TO NEXT ENTYR
SOJLE Q1,USGI6B ;MORE JOBS TO DO?
SOJG Q2,USGI6A ;YES - MORE IN THIS PAGE?
MOVE T1,CKIDNT ;RESTORE LAST PAGE MAPPED
AOJA T1,USGIN6 ;STEP TO NEXT PAGE
USGI6B: CALL UNMAPC ;UNMAP CHECKPOINT PAGE; THIS IS THE LAST TIME
; WE WILL BE USING ONLY READ ACCESS
MOVE T1,USGJFN ;GET USAGE FILE JFN
MOVE T2,USGEOF ;CURRENT EOF
SFPTR ;SET TO START WRITTING HERE
JFCL ;IGNORE ERRORS
MOVX T1,SF%USG ;TURN ON USAGE JSYS
IORM T1,FACTSW ;...
;..
;..
MOVE T1,TODCLK ; GET MONITOR UPTIME IN MSEC
IDIVI T1,^D1000 ; MAKE IT SECONDS
MOVEM T1,USGMUP ; AND STORE IT WHERE RESTART LIST KNOWS
MOVE T1,TODCLK ; GET MONITOR UPTIME IN MSEC
IDIVI T1,^D1000 ; MAKE IT SECONDS
MOVEM T1,USGMUP ; AND STORE IT WHERE RESTART LIST KNOWS
;WRITE RESTART RECORD NOW
MOVEI T1,.USENT ;GENERATE ENTRY
MOVEI T2,RSTLST ;POINT TO RESTART LIST
USAGE ;THIS WILL MAKE A RECORD ON USQ
CALL USGMES ;IMMEDIATELY WRITE INTO FILE
MOVEI Q1,1 ;MERGE CHECKPOINT FILE
SOS CKPNJ ; FOR JOBS 1 THRU NJOBS-1
CALL LGTAD ;GET DATE/TIME
MOVE Q2,T1 ;SAVE IN Q2
USGIN7: MOVE T1,Q1 ;JOB #
CALL USGSPG ;SET PAGE FOR THIS JOB
SKIPGE 0(T4) ;IS ENTRY ACTIVE?
JRST USGIN8 ;NO, GET NEXT ENTRY
MOVEI T2,.UTCKP ;RECORD TYPE FOR CHECKPOINT MERGE
HRLM T2,1(T4) ;STORE IN HEADER
HRRZ T3,1(T4) ;GET RECORD LENGTH
CAIL T3,CKPSIZ ;IS LENGTH LESS THAN MAX SIZE?
JRST [ BUG.(CHK,CKPLEN,MEXEC,HARD,<USGINI - ILLEGAL CHECKPOINT ENTRY LENGTH>,,<
Cause: While executing USGINI, an active checkpoint entry was found with an illegal
length. This could be caused by a trashed CHECKPOINT.BIN file.
Action: Delete CHECKPOINT.BIN and reload system.
>)
JRST USGIN8] ;AND IGNORE ENTRY
ADD T3,T4 ;ADD IN BASE
HRLM T2,0(T3) ;STORE TYPE IN TRAILER ALSO
MOVEM Q2,2(T4) ;SET ENTRY DATE/TIME TO NOW.
CALL USGUP0 ;UPDATE FOR THIS JOB
USGIN8: CAMGE Q1,CKPNJ ;DONE?
AOJA Q1,USGIN7 ;NO - INCR AND PROCEDE
CALL UNMAPC ;UNMAP CHECKPOINT PAGE
CALLRET NXTASC ;Find next acct shift change time
; and return from USGINI
;Initialize accounting shift change stuff
;Must be done before SETSPD is run!!!
ASCINI: SETZM ASCPTR ;Indicate no accounting shift changes yet
SETZM ASCTIM ; and no time set for next one
SETOM ASCLOK ;Leave ASCPTR lock unlocked
RET ;Return from ASCINI
;RESTART ENTRY DATA LIST
RSTLST: USENT. (.UTRST,1,1) ;RESTART RECORD TYPE
USSNM. (<-1,,SVN>) ;SYSTEM NAME STRING
USMVR. ([EXP SVNM]) ;SYSTEM VERSION NUMBER
USPNM. (<SIXBIT "MONITR">,US%IMM)
USPVR. ([EXP SVNM]) ;MONITOR NAME/VERSION FOR USAGE
USMBD. (SYSTAD) ;MONITOR BUILD DATE/TIME
USMUP. (USGMUP) ; MONITOR UPTIME SINCE LAST RELOAD
USLCK. (CKPDTL) ;DATE/TIME OF LAST CHECKPOINT
USMUP. (USGMUP) ; MONITOR UPTIME SINCE LAST RELOAD
USCP0. (APRSER) ;APR SERIAL NUMBER
0 ;END OF LIST
;ROUTINE TO OPEN A FILE FOR READ/WRITE
USGOPN: MOVX T1,GJ%SHT!GJ%PHY!GJ%OLD
GTJFN
RET ;NON-EX RETURN
MOVX T2,44B5+OF%RD!OF%WR!OF%RTD
OPENF ;OPEN FILE
RET ;FAILURE
RETSKP ;OK - RETURN
;ROUTINE TO CREATE USAGE FILE
CRUSGF: MOVX T1,GJ%SHT!GJ%PHY!GJ%FOU
HRROI T2,USGFIL
GTJFN
RET ;ERROR
MOVX T2,44B5+OF%WR ;WRITE FIRST
OPENF
RET ;FAILURE
CALL USGNOD ;SET NO-DUMP
HRLI T1,.FBBYV ;CHANGE THIS WORD
TXO T1,CF%NUD
MOVX T2,FB%RET ;RETENTION COUNT
MOVEI T3,0 ; TO BE 0
CHFDB
HRRZS T1 ;JFN ONLY AGAIN
CLOSF ;FIX ON DISK
JFCL
RETSKP ;GOOD RETURN
;ROUTINE TO COPY CHECKPOINT ENTRY TO USAGE FILE
; T1/ PAGE IDENT
; T4/ ENTRY ADDRESS
USGUP0: CALL USGUPS ;Perform file update
SETOM 0(T4) ;SET ENTRY FREE
RET ;RETURN FROM USGUP0
; Subroutine to copy current checkpoint entry into USAGE file entry
USGUPS: SKIPGE 0(T4) ;ENTRY ACTIVE?
RET ;NO - NOTHING TO DO
MOVE T1,USGEOF ;GET CURRENT EOF
MOVEM T1,0(T4) ;SAVE IN CHECKPOINT
MOVE T1,USGJFN ;JFN FOR USAGE FILE
MOVEI T2,1(T4) ;ADDRS OF DATA
HRLI T2,(POINT 36,,) ;FORM BP
HRRZ T3,0(T2) ;GET LENGTH OF ITEM
ADDM T3,USGEOF ;UPDATE USAGE EOF POINTER
MOVNS T3 ;MAKE NEGATIVE
SOUT ;DUMP INTO FILE
ERJMP [CALL USGIOE ;REPORT IO ERROR
JRST .+1]
MOVE T1,USGEOF ;CALC PAGE JUST WRITTEN
LSH T1,-PGSFT
HRL T1,USGJFN ;FORM IDENT
MOVEI T2,1 ;DO ONE PAGE
UFPGS ;UPDATE FILE PAGE
ERJMP [CALL USGIOE ;REPORT FAILURE
JRST .+1]
RET ;Return from USGUPS
;IO ERROR IN USAGE FILE
USGIOE: MOVE T1,USGEOF ;REPORT BAD PAGE
LSH T1,-PGSFT
BUG.(CHK,UXXWER,MEXEC,HARD,<WRITE ERROR IN USAGE FILE>,<<T1,D>>,<
Cause: This BUG is not documented yet.
Action:
>)
RET ;CONTINUE
;ROUTINE TO CREATE A CHECKPOINT FILE
CRCKPT: STKVAR <SCKJFN>
HRROI T2,CKPFIL
MOVX T1,GJ%SHT!GJ%PHY!GJ%NEW ;NEW ONLY
GTJFN
ERJMP [MOVX T1,GJ%SHT!GJ%PHY!GJ%DEL ;HANDLE CASE OF THE
HRROI T2,CKPFIL ; DELETED BUT NOT EXPUNGED FILE
GTJFN ; TO PREVENT UXXCKP BUGHLTS
ERJMP R ;NOT THAT CASE
HRLI T1,.FBCTL ;WORD IN FDB TO CHANGE
MOVX T2,FB%DEL ;TO UNDELETE FILE
SETZM T3 ;CLEAR DELETED BIT
CHFDB ;DO IT
ERJMP R ;FAILURE
HRRZS T1 ;CLEAR STUFF FROM LEFT HALF
JRST .+1] ;AND CONTINUE
MOVEM T1,SCKJFN ;SAVE FOR LATER
MOVX T2,44B5+OF%WR!OF%RD ;READ/WRITE
OPENF
RET ;FAILURE
CALL USGNOD ;SET NO-DUMP
NOINT ;APPEASE FREE SPACE ROUTINES
MOVEI T1,CKPSIZ ;ALLOCATE BUFFER
CALL ASGSWP ; FOR CHECKPOINT RECORD
RETBAD (,OKINT) ;NONE TO BE HAD
MOVE Q2,T1 ;SAVE BASE ADDRS
MOVEI Q1,NJOBS ;INIT FOR NUMBER OF JOBS
SETOM 0(Q2) ;-1 SHOWS FREE ENTRY
MOVEM Q1,1(Q2) ;STORE # OF JOBS IN JOB 0
CALL LGTAD
MOVEM T1,2(Q2) ;DATE/TIME OF LAST CHECKPOINT
MOVEI T1,CKPSIZ ;SIZE OF CHECKPOINT RECORD
MOVEM T1,3(Q2)
MOVE T1,SCKJFN ;GET JFN
HRLI Q2,(POINT 36,,) ;FORM BP
CRCKP1: MOVE T2,Q2 ;COPY BP
MOVNI T3,CKPSIZ ;SIZE OF ENTRY
SOUT ;WRITE IT
ERJMP [OKINT ;UNDO NOINT
RETBAD ()] ;AND GIVE ERROR
SOJG Q1,CRCKP1 ;LOOP OVER ALL JOBS
CLOSF ;CLOSE FILE
JFCL
HRRZ T1,Q2 ;ADDRS OF TEMP BLOCK
MOVEI T2,CKPSIZ ; ITS SIZE
CALL RELSWP ;RELEASE STORAGE
OKINT ;UNDO NOINT
RETSKP ;GOOD RETURN
;ROUTINE TO UPDATE CHECKPOINT PAGE AND UNMAP IT
UNMAPC: MOVEI T2,1 ;1 PAGES
SKIPE T1,CKPGID ;PAGE IDENT OF LAST PAGE MAPPED
UFPGS ;UPDATE ON DISK
JFCL ;WE TRIED
SETZB T1,CKPGID ;UNMAP PAGE, MARK NO PAGE MAPPED
MOVEI T2,FPG0A
CALLRET SETMPG ;...
;ROUTINE TO SET (MAP) CHECKPOINT FILE PAGE FOR JOB N
; T1/ JOB #
;RETURNS: T4/ ENTRY ADDRESS
; T1/ PAGE IDENT
USGSPG: IMULI T1,CKPSIZ ;CALC CHECKPOINT LOC
IDIVI T1,PGSIZ ;T1 := PAGE , T2 := LINE
PUSH P,T2 ;SAVE LINE
HRL T1,CKPJFN ;FORM JFN,,PN
MOVX T2,PM%RD!PM%WR ;READ/WRITE
CALL USGMAP
POP P,T4 ;RESTORE OFFSET
ADDI T4,FPG0A ;ADD IN BASE
RET ; AND RETURN
;ROUTINE TO SET FB%NOD (NODUMP) FOR FILE JFN IN T1
USGNOD: HRLI T1,.FBCTL ;SAY WORD 1
TXO T1,CF%NUD ;NO UPDATE DIRECTORY
MOVX T2,FB%NOD ;SET BIT AND MASK
MOVX T3,FB%NOD
CHFDB ;WRITE INTO FDB
HRRZS T1 ;RETURN JFN INTACT
RET
;ROUTINE TO MAP A PAGE OF A FILE INTO FPG0
;CALL: T1/ JFN,,PAGE#
; T2/ ACCESS BITS
USGMAP: CAMN A,CKPGID ;IS THIS PAGE ALREADY MAPPED?
RET ;YES-- RETURN NOW FROM USGMAP
PUSH P,T2 ;SAVE ACCESS INFO
PUSH P,T1 ;SAVE PAGE ID
MOVEI T2,1 ;ONE PAGE TO UPDATE
SKIPE T1,CKPGID ;GET CURRENT PAGE THAT'S MAPPED
UFPGS ;UPDATE IT
JFCL ;WE TRIED
POP P,T1 ;RESTORE PAGE IDENT
MOVEM T1,CKPGID ;REMEMBER NEW PAGE IDENT
CALL JFNOFN ;CONVERT TO OFN,,PN
BUG.(HLT,UXXMAP,MEXEC,soft,<USGMAP: CALL TO JFNOFN FAILED>,,<
Cause: USGMAP wants to map a page of a file into FPG0 via SETMPG.
It calls JFNOFN to convert the JFN.PN atom to OFN.PN, which SETMPG
wants. If JFNOFN fails, this BUGHLT occurs. Some reasons that JFNOFN
will fail are: JFN is not associated with a disk file; JFN is not open;
attempt to create a new page table for a file that is not open for
writing; attempt to create a new page table for a directory file;
attempt to create a new page table for which there is no room on disk.
>)
POP P,T2 ;RESTORE ACCESS INFO
HRRI T2,FPG0A ;ADDRS TO MAP PAGE
CALLRET SETMPG ;MAP THE PAGE
;USAGE QUEUED MESSAGE HANDLER
USGMES: SAVEAC <Q1,Q2,FX> ;SAVE REGS
USGMS0: SKIPN Q1,USGBEG ;ANYTHING ON QUEUE?
RET ;NO - DONE
LOAD T1,UQFCN,(Q1) ;GET FCN CODE
CAILE T1,USGLGL ;CHECK VALID
USGBFC: BUG.(HLT,UXXILL,MEXEC,soft,<USGMES: ILLEGAL FUNCTION CODE>,,<
Cause: The USAGE JSYS causes entries in the usage queue. Each
entry has a dispatch offset which is used by USGMES as an index into
a vector for calling the appropriate support routine.
If the dispatch offset is too large, this BUGHLT occurs. Since the
monitor itself is creating the entries in the queue, such a mismatch
should never occur.
>)
CALL @USGREQ(T1) ;DISPATCH
CALL OFFUSQ ;REMOVE FROM QUEUE
JRST USGMS0 ;LOOP TILL DONE
;DISPATCH TABLE
USGREQ: DTBDSP (USGENT) ;0 - WRITE ENTRY INTO FILE
DTBDSP (USGCLS) ;1 - CLOSE OUT FILE
DTBDSP (USGCKU) ;2 - CHECKUOINT
DTBDSP (USGLGI) ;3 - LOGIN
DTBDSP (USGLGO) ;4 - LOGOUT
DTBDSP (USGSEN) ;5 - SESSION ENTRY
DTBDSP (USGBFC) ;6 - ILLEGAL
DTBDSP (USGBFC) ;7 - ILLEGAL
DTBDSP (USGASU) ;10 - Accounting shift change
USGLGL==.-USGREQ-1
;JOB 0 ROUTINE TO PERFORM CHECKPOINT TIMING
CHKCKP: MOVE T1,TODCLK ;CURRENT TIME
CAMGE T1,CKPTIM ;TIME FOR CHECKPOINT?
RET ;NO - RETURN
SAVEAC <Q1,Q2,FX> ;SAVE REGS
MOVE T1,FACTSW ;CHECK IF ACCOUNTING
TXNE T1,SF%USG ;???
CALL USGCKP ;YES - CHECKPOINT ALL JOBS
MOVE T1,TODCLK ;RESET NEXT TIME
ADD T1,CKPINV ;ADD INTERVAL
MOVEM T1,CKPTIM ;SAVE NEW TIME
RET ;RETURN
;Job 0 routine to perform automatic accounting shift change
CHKASC: SKIPE T1,ASCTIM ;Get next accounting shift change time
CAMLE T1,TODCLK ;Time for change yet?
RET ;Not yet.
SAVEAC <Q1,Q2,FX> ;Need all the Q's for this...
MOVE T1,FACTSW ;Get current state bits
TXNE T1,SF%USG ;Doing accounting today?
CALL USGASC ;Yes-- perform accounting shift change
; CALLRET NXTASC ;Compute next time for change and return from CHKASC
; NXTASC - Compute next accounting shift change time
;
; Register usage in this routine:
; T1/ Current DOW/time table entry
; T2/ Time selected from table (-1 if none found yet)
; T3/ Bit for current DOW (day-of-week) being tested
; T4/ Current pointer to DOW/time table
; Q1/ Bit for DOW of today
; Q2/ Current time in seconds since midnight of the day being tested
; (will be negative if other than today)
; DOW/time table entry format:
; LH: Bit n on means that this entry valid on day-of-week (DOW) n
; (0=Monday)
; RH: Time-of-day when shift will occur on selected DOWs, in
; seconds since midnight.
NXTASC::
SAVEAC <Q1,Q2,FX> ;Need all the Q's
LOCK ASCLOK ;Lock time table database
MOVX T2,-1 ;Use current date/time
MOVX T4,0 ;No options
ODCNV ;Get time, day-of-week, etc.
ERJMP NXTAS7 ;No date/time-- set next time to never
HRRZ Q2,T4 ;Save the seconds since midnight now
MOVX Q1,1B0 ;Get first bit for Monday
MOVNI T1,(T3) ;Get -ve day of week (0=Monday)
LSH Q1,(T1) ;Get bit for this day of week in Q1
MOVE T3,Q1 ;Start testing at today's DOW
MOVX T2,^D<24*60*60> ;Indicate no time found yet
; Loop through table, once for each DOW in the future, until
; next accounting shift change time is found
NXTAS1: SKIPN T4,ASCPTR ;Get AOBJN pointer to DOW/time table
JRST NXTAS7 ;No table-- set next time to infinity
; Loop through table for this DOW to see if any changes this day
NXTAS2: MOVE T1,(T4) ;Get entry from table
TDNN T1,T3 ;Entry in effect this DOW?
JRST NXTAS3 ;No-- skip it
CAIGE Q2,(T1) ;Has the time for this change already past?
CAIG T2,(T1) ; or have we already found an earlier time?
JRST NXTAS3 ;Yes to either question-- skip entry
HRRZ T2,T1 ;Found a reasonable time-- remember it
NXTAS3: AOBJN T4,NXTAS2 ;Loop through whole table
CAIGE T2,^D<24*60*60> ;Find a valid entry?
JRST NXTAS8 ;Yes-- go compute time from now
; No time found this DOW-- step to next day in future and search table again
TDNE T3,Q1 ;Back to today?
JUMPL Q2,NXTAS7 ;Yes-- give up if not first time
SUBI Q2,^D<24*60*60> ;Step current time back another day
LSH T3,-1 ;Shift to next DOW
TXNE T3,1B7 ;Beyond Sunday?
MOVX T3,1B0 ;Yes-- reset back to Monday
JRST NXTAS1 ;Keep searching table
; No table or no entries with any DOW's-- set next time to infinity
NXTAS7: SETZ T2, ;Indicate no time set
JRST NXTAS9 ;Store and return
; Found next applicable table entry-- find out when the change should occur
NXTAS8: SUB T2,Q2 ;Compute seconds from now till
; when entry time will occur
IMULI T2,^D1000 ;Convert to TODCLK units of MS
ADD T2,TODCLK ;Compute TODCLK time when we will change
NXTAS9: MOVEM T2,ASCTIM ;Save next change time
UNLOCK ASCLOK ;Unlock ASCPTR database
RET ;Return from NXTASC
;WRITE ENTRY INTO FILE FROM QUEUE
USGENT: MOVE T1,USGJFN ;GET JFN
MOVEI T2,UQDAT(Q1) ;POINT TO DATA
HRLI T2,(POINT 36,,) ;FORM BP
HRRZ T3,UQDAT(Q1) ;GET LENGTH OF ITEM
ADDM T3,USGEOF ;UPDATE EOF POINTER
MOVNS T3 ;NEGATE
SOUT ;WRITE IN FILE
ERJMP [CALL USGIOE ;REPORT ERROR
JRST .+1]
MOVE T1,USGEOF ;CALC PAGE JUST WRITTEN
LSH T1,-PGSFT
HRL T1,USGJFN ;FORM IDENT
MOVEI T2,1 ;DO ONE PAGE
UFPGS ;UPDATE FILE PAGE
ERJMP USGIOE ;OH WELL...
RET ;DONE
;CLOSE OUT CURRENT FILE AND START A NEW ONE
USGCLS: STKVAR <NJFN>
CALL CRUSGF ;CREATE A NEW FILE
JRST [ BUG.(CHK,UXXCL1,MEXEC,HARD,<UNABLE TO CREATE NEW USAGE FILE>,,<
Cause: This BUG is not documented yet.
Action:
>)
RET] ;JUST EXIT - NOTHING DONE
HRROI T2,USGFIL ;NOW OPEN IT
CALL USGOPN
JRST [ BUG.(CHK,UXXCL2,MEXEC,HARD,<UNABLE TO OPEN NEW USAGE FILE>,,<
Cause: This BUG is not documented yet.
Action:
>)
RET] ;TOUGH AGAIN
MOVEM T1,NJFN ;SAVE NEW JFN
MOVE T1,USGJFN ;GET CURRENT JFN
HRLI T1,.FBCTL ;THIS WORD
TXO T1,CF%NUD ;DONT UPDATE DIR
MOVX T2,FB%NOD ;SET TO CLEAR THIS BIT
SETZ T3, ; TO ALLOW FILE TO DUMP
CHFDB
ERJMP .+1 ;WE TRIED
HRRZS T1 ;RESTORE JFN
CLOSF ;CLOSE OUT FILE
BUG.(CHK,UXXCL3,MEXEC,HARD,<UNABLE TO CLOSE USAGE FILE>,,<
Cause: This BUG is not documented yet.
Action:
>)
SETZM USGEOF ;SETUP FOR NEW FILE
MOVE T1,NJFN
MOVEM T1,USGJFN ;NOW HAVE NEW FILE TO USE
UNLOCK (USGLOK) ;UNLOCK WAITER
RET ;RETURN
;ROUTINE TO SET CHECKPOINT FROM QUEUE
;RETURNS: Q2/ PAGE IDENT
UCKSET: LOAD T1,UQLJI,(Q1) ;Get Local job index from USAGE header
CALL USGSPG ;SET CHECKPOINT PAGE
MOVE Q2,T1 ;SAVE IDENT
MOVEI T1,2(T4) ;SET FROM,,TO FOR CLEAR
HRLI T1,1(T4) ;...
SETZM 1(T4) ;ZERO FIRST WORD
BLT T1,CKPSIZ-1(T4) ;CLEAR
MOVEI T1,1(T4) ;POINT TO DESTINATION
HRLI T1,UQDAT(Q1) ; LHS := DATA
HRRZ T2,UQDAT(Q1) ;GET LENGTH
ADD T2,T4 ;LAST WORD OF XFER
BLT T1,0(T2) ;MOVE DATA
SETZM 0(T4) ;MARK ITEM INUSE
RET ;RETURN DONE
;HANDLE USAGE LOGIN
USGLGI: CALL UCKSET ;COPY DATA TO CHECKPOINT
CALLRET UNMAPC ;EXIT AND UNMAP PAGE
;HANDLE USAGE LOGOUT
USGLGO: CALL UCKSET ;COPY DATA TO CHECKPOINT
MOVE T1,Q2 ;SETUP IDENT
CALL USGUP0 ;UPDATE USAGE FILE (CLEAR CKPT)
CALLRET UNMAPC ;EXIT AND UNMAP PAGE
;HANDLE SESSION END
USGSEN: LOAD T1,UQLJI,(Q1) ;Get local job index
CALL USGSPG ;MAP CHECKPOINT ENTRY
MOVE T2,UQDAT+1(Q1) ;GET UHTAD (SESSION END)
MOVEM T2,2(T4) ;UPDATE CHECKPOINT RECORD FOR SESSION END
PUSH P,T4 ;SAVE ADDRS
HRRZ T3,1(T4) ;CALC POINTER TO CHECKPOINT DATA
ADDI T3,CKOFF(T4)
HRRZ T2,UQDAT(Q1) ;CALC POINTER INTO QUEUE ENTRY
ADDI T2,CKOFF+1(Q1) ; FOR CKPT DATA
MOVE T4,0(T2) ;UPDATE CHECKPOINT RECORD
MOVEM T4,0(T3) ; STASH SESSION START TIME
MOVE T4,1(T2) ;GET CONNECT TIME
MOVEM T4,1(T3) ; STASH IT
MOVE T4,2(T2) ;GET RUNTIME
MOVEM T4,2(T3) ; STASH IT
POP P,T4 ;RESTORE ADDRS
CALL USGUP0 ;MERGE INTO USAGE FILE(T1 AND T4 SETUP)
CALL UCKSET ;COPY NEW CHECKPOINT INFO
HRRZ T1,1(T4) ;NOW SETUP TO CLEAR CHECKPOINT
ADDI T1,CKOFF(T4)
SETZM 1(T1) ;DATA FOR RUTIME AND CONNECT
SETZM 2(T1) ;...
MOVE T2,UQDAT+1(Q1) ;GET TIME OF SESSION CHANGE (END TIME)
MOVEM T2,0(T1) ; STASH AS NEW SESSION START TIME
CALLRET UNMAPC ;UNMAP CHECKPOINT PAGE
;ROUTINE TO UPDATE CHECKPOINT ENTRY FOR A SINGLE JOB
; T1/ JOB NUMBER
CPOINT: SETZM ASCFLG ;Don't perform accounting shift change
CPONT0: SAVEAC <Q1,Q2,FX> ;SAVE REGS
STKVAR <PGID,CPAD,CPIP> ;Page ident, chekpoint address,
; checkpoint item AOBJN pointer
MOVE Q1,T1 ;SAVE JOB # IN Q1
CALL USGSPG ;SET CHECKPOINT PAGE
MOVEM T1,PGID ;Save checkpoint page address in PGID
MOVEM T4,CPAD ;Save address within page in CPAD
HRRZ FX,1(T4) ;GET LENGTH OF ENTRY
ADDI FX,CKOFF(T4) ;POINT TO CHECKPOINT DATA
HRLI FX,-CKITMS ;FORM AOBJN PNTR
MOVEM FX,CPIP ;Save checkpoint item pointer
CALL LGTAD ;GET CURRENT DATE/TIME
MOVEM T1,2(T4) ; INTO CHECKPOINT RECORD
MOVE T1,Q1 ;JOB #
NOSKED ;DO THIS NOSKED
SKIPN JOBDIR(T1) ;JOB LOGGED IN?
JRST [ OKSKED ;NO - JUST RETURN
JRST CPNT3]
CALL SETJSB ;MAP JSB FOR JOB
OKSKED ;JOB IS NOW FIXED IN MY MAP
MOVE T3,T1 ;SAVE PNTR IN T3
MOVEI Q2,0 ;INIT INDEX TO 0
; *** NOTE *** WITH FIXES TO SESSION START TIME, IT MAY NOT BE NECESSARY
; TO RESET THE SESSION START TIME ALL THE TIME. IF YOU CAN PROVE IT ...
CPNT1: XCT CPTBL(Q2) ;FETCH WORD
MOVEM T1,0(FX) ;STORE
AOS Q2 ;STEP TO NEXT TABLE ENTRY
AOBJN FX,CPNT1
SKIPN ASCFLG ;This accounting shift change also?
JRST CPNT2 ;No-- go on
; Accounting shift change-- update USAGE file
MOVE T1,PGID ;Get page ident
MOVE T4,CPAD ;Address within page
PUSH P,T3 ;Save JSB pointer
CALL USGUPS ;Make new USAGE entry
SETZM 0(T4) ;Indicate checkpoint entry still in use
POP P,T3 ;Restore JSB pointer
; Reset job statistics and set new checkpoint entry
MOVE FX,CPIP ;Get checkpoint item pointer
MOVEI Q2,0 ;INIT INDEX TO 0
CPNT11: MOVE T1,0(FX) ;Get old value
XCT SETBL(Q2) ;Reset current value of data item
XCT CPTBL(Q2) ;Get new value of data item
MOVEM T1,0(FX) ;STORE
AOS Q2 ;STEP TO NEXT TABLE ENTRY
AOBJN FX,CPNT11
CPNT2: CALL CLRJSB ;UNMAP JSB
CPNT3: RET ;RETURN FROM CPOINT
;CHECKPOINT DATA TABLE
CPTBL: MOVE T1,CTIMON(T3) ;(0) SESSION START TIME
CALL CPGCON ;(1) GET CONNECT TIME
CALL CPGRTM ;(2) JOB RUN TIME
;Checkpoint data routines
CPGCON: MOVE T1,TODCLK ;CURRENT DATE/TIME
SUB T1,CONSTO(T3) ; LESS START TIME
SUB T1,JSSCTM(T3) ; from start of session
RET ;GIVES CONNECT TIME
CPGRTM: MOVE T1,JOBRT(Q1) ;Get job runtime
SUB T1,JSSRTM(T3) ; from start of session
RET ;Return from CPGRTM
;Session End data table
SETBL: CALL SESCTI ;(0) Date/time of session start
ADDM T1,JSSCTM(T3) ;(1) Console time start of session
ADDM T1,JSSRTM(T3) ;(2) Runtime start of session
;Session End data routines
SESCTI: CALL LGTAD ;Get current date/time
MOVEM T1,CTIMON(T3) ;Set start of new session
RET ;Return from SESCTI
;PERFORM CHECKPOINT OVER ALL JOBS
USGCKU: CALL USGCKP ;DO WORK
JRST USGULR ;Unlock waiter and return
;Perform accounting shift change
USGASU: CALL USGASC ;Do work
USGULR: UNLOCK (USGLOK) ;UNLOCK WAITER
RET ;RETURN
;Internal routine to perform checkpoint of all jobs
; or accounting shift change
USGCKP: SETZM ASCFLG ;Note not accounting shift change
JRST USGC00 ;Continue
USGASC: SETOM ASCFLG ;Note accounting shift change
USGC00: MOVEI Q1,NJOBS-1 ;MAX JOBS TO DO
; Loop over all active jobs
USGCK0: SKIPN JOBDIR(Q1) ;JOB EXIST AND IS LOGGED IN?
JRST USGCK1 ;NO - STEP TO NEXT
MOVE T1,Q1 ;COPY JOB #
CALL CPONT0 ;CHECKPOINT ONE JOB
USGCK1: SOJG Q1,USGCK0 ;LOOP OVER ALL
MOVEI T1,0 ;MAP JOB 0 ENTRY
CALL USGSPG ;...
MOVE Q1,T4 ;POINTER TO ENTRY
MOVE Q2,T1 ;PAGE IDENT
CALL LGTAD ;GET CURRENT DATE/TIME
MOVEM T1,2(Q1) ;UPDATE DATE/TIME OF CKPOINT
MOVE T1,Q2 ;UNMAP PAGE
CALLRET UNMAPC ; AND EXIT
RESCD
TNXEND
END