Trailing-Edge
-
PDP-10 Archives
-
BB-H240E-BM_1985
-
decnet-sources/fal.mac
There are 26 other files named fal.mac in the archive. Click here to see a list.
TITLE FAL Network file transfer utility for TOPS20 DECNET
SUBTTL D. Oran - P.J. Taylor /POM/CLB/ 17-Nov-81
;
;
;
; COPYRIGHT (c) 1978,1979,1980,1985
; DIGITAL EQUIPMENT CORPORATION, MAYNARD, MA.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH GLXMAC ;Get Galaxy symbols
PROLOG (FAL)
SEARCH DAPSYM ;Get DAPLIB symbols
SEARCH QSRMAC ;Get quasars symbols
;Version Information
FALVER==2 ;MAJOR VERSION OF FAL
FALMIN==0 ;MINOR VERSION OF FAL
FALEDT==32 ;EDIT LEVEL
FALWHO==0 ;WHO LAST EDITED (0=DEC DEVELOPMENT)
GLOB DAPEDT
VFAL==<VRSN.(FAL)>+DAPEDT ;Get the version level
EXTERN .JBFF ;ADDRESS OF FIRST FREE LOCATION
SUBTTL Table of contents
; TABLE OF CONTENTS FOR FAL
;
;
; SECTION PAGE
; 1. Title page................................................ 1
; 2. Table of contents......................................... 2
; 3. Revision History.......................................... 3
; 4. Constants and assembly parameters......................... 4
; 5. LOCAL MACROS.............................................. 5
; 6. Job version and entry vector.............................. 6
; 7. Initialization blocks..................................... 6
; 8. MAIN ENTRY POINT AND INITIALIZATION....................... 7
; 9. CHKQUE Routine to process IPCF messages.................. 8
; 10. LOG message processing................................... 9
; 11. CHKFRK Routine to check fork status...................... 10
; 12. SERVER initializtion...................................... 11
; 13. SERVER Listening loop..................................... 12
; 14. SERVER Connection verification routine.................... 13
; 15. CREFRK Fork creation and initializtion................... 14
; 16. KILFRK Routine to kill a server.......................... 15
; 17. LOGSNM Routine to log system name........................ 16
; 18. LOGMSG and LOGCHR Logfile output routines................. 17
; 19. MSGCHR Text output routine for inferior servers........... 18
; 20. SNDFAL Routine to send IPCF packet to FAL................ 19
; 21. CLSJFN, RELJFN, CPYSTR.................................... 19
; 22. PSIINI Software interrupt system initialization.......... 20
; 23. Interrupt service routines................................ 20
; 24. Pure data storage......................................... 21
; 25. Interrupt tables.......................................... 22
; 26. Impure Data storage....................................... 23
SUBTTL Revision History
COMMENT \
Edit Comment
0020 First field test of FAL 2(20)
0021 Fix FAL to check for network support before starting forks
Fix logging from forks
0022 Add interrupt reason to D$INTR calls so it doesn't interrogate
link status for each interrupt
0023 Make DIRPSW large enough to accommadate 39 character passwords
so stack won't get destroyed. Also get default account for
login so that a null account string will be allowed.
0024 Process all interrupts as level 1 and make LEV1PC global to
allow access from D$INTR in DAPLIB
*** Edits for DECnet-20 V3.0 begin here
0025 Implement logging of activity in PS:<SPOOL>FAL.LOG. If this file
exists it will be appended to. If the file does not exist, no
logging will be done.
0026 Make SRVUSR, SRVACT, and SRVPSW large enough to accommodate the
longest possible strings.
0027 Add DI%PGM field to DAPLIB initialization block
*** Changes for TOPS-20 V. 6.1 begin here ***
0030 Add global entry .DNCON which will allow us to link without route-
through support (which we don't need/use anyhow).
0031 Add new ACCES function for password checking with encrypted psw's
0032 Change debugging object type to conform with updated standard
\ ;end revision history
SUBTTL Constants and assembly parameters
; ACCUMULATOR DEFINITIONS
P5==13 ;EXTRA PERMANENT AC
M==14 ;IPCF message address
;Constants
XP SRVLNK,1 ;Server link index is 1
XP MINSRV,3 ;Minimum number of forks
XP MAXSRV,4 ;Maximum number of forks
XP MAXNOD,20 ;Maximum number of nodes
XP PDLEN,MAXNOD*20 ;Size of the stack
XP GJFSIZ,20 ;Size of the GTJFN block
XP FILSIZ,20 ;Maximum size of a file name
XP CHKLEN,.CKAUD+1 ;Length of CHKAC arg block
XP MSGSIZ,^D500*5-1 ;Maximum count of logcharacters
;Interrupt channel assignments
XP .ICIPC,0 ;IPCF channel
XP .ICDAV,1 ;Data available
XP .ICCDN,2 ;Connect/Disconnect
XP .ICIMA,3 ;Interrupt message
GLOB DATEND ;Last location of DAP storage
NFKPGS==<DATEND/1000>+1 ;Number of fork pages
SUBTTL LOCAL MACROS
DEFINE TXT(TEXT) <POINT 7,[ASCIZ\TEXT\]>
DEFINE $FD(NAME) <
XWD 10,0
ASCIZ\NAME\>
SUBTTL Job version and entry vector
LOC 137 ;SET THE VERSION
.JBVER: EXP VFAL
RELOC
; ENTRY VECTOR DEFINITION
ENTVEC: JRST FAL ;MAIN ENTRY POINT
JRST FAL ;REENTER ENTRY POINT
EXP VFAL ;VERSION OF FAL PROGRAM
SUBTTL Initialization blocks
FALIB: $BUILD (IB.SZ)
$SET (IB.PRG,,%%.MOD) ;Program name is FAL
$SET (IB.OUT,,LOGMSG) ;Default output routine
$SET (IB.INT,,<LEVTAB,,CHNTAB>) ;Point to PSI stuff
$SET (IB.PIB,,FALPIB) ;Point to IPCF stuff
$EOB
FALPIB: $BUILD (PB.MXS) ;Pid info
$SET (PB.HDR,PB.LEN,PB.MXS) ;Length
$SET (PB.INT,IP.CHN,.ICIPC) ;IPCF channel
$SET (PB.FLG,IP.PSI,1) ;Use PSI for IPCF
$SET (PB.SYS,IP.MNP,MAXSRV) ;Number of pids required
$SET (PB.NAM,,<POINT 7,SRVOBJ>)
$EOB
SRVIB: $BUILD (IB.SZ)
$SET (IB.PRG,,'FALSRV') ;Program name is FALSRV
$SET (IB.OUT,,MSGCHR) ;Default output routine
$SET (IB.INT,,<LEVTAB,,CHNTAB>) ;Point to PSI stuff
$SET (IB.PIB,,SRVPIB) ;Point to IPCF stuff
$EOB
SRVPIB: $BUILD (PB.MXS) ;Pid info
$SET (PB.HDR,PB.LEN,PB.MXS) ;Length
$SET (PB.INT,IP.CHN,.ICIPC) ;IPCF channel
$SET (PB.FLG,IP.PSI,1) ;Use PSI for IPCF
$EOB
LOGFOB: $BUILD (FOB.SZ)
$SET (FOB.FD,,[$FD(PS:<SPOOL>FAL.LOG)])
$SET (FOB.CW,FB.BSZ,7)
$EOB
LOGDBG: $BUILD (FOB.SZ)
$SET (FOB.FD,,[$FD(DSK:FAL.LOG)])
$SET (FOB.CW,FB.BSZ,7)
$EOB
.DNCON:: $RETF ;[0030] No route-through support !!!
SUBTTL MAIN ENTRY POINT AND INITIALIZATION
FAL: RESET ;Clean up from last start
MOVE P,[IOWD PDLEN,PDL] ;SET UP STACK
SETZM DATORG ;Clear impure storage
MOVE S1,[DATORG,,DATORG+1]
BLT S1,DATEND-1
HRROI S1,SRVOBJ ;Point to my object name
MOVX S2,TXT(FAL)
SKIPE DEBUGW
MOVX S2,TXT(.FALDEBUG) ;[0032]Become debugging FAL
$CALL CPYSTR ;Store the name
MOVEI S1,IB.SZ
MOVEI S2,FALIB ;POINT TO IB
$CALL I%INIT ;GET THE LIBRARY
HRROI S1,[ASCIZ/DCN:/]
STDEV
ERJMP [$FATAL (No network support)]
MOVE S2,FALPIB+PB.PID ;Get my PIB
MOVEM S2,FALPID ;Say I am FAL
HRRZI S1,.MSIIC ;BYPASS MOUNT COUNTS
MSTR
ERJMP .+1
$CALL PSIINI ;INITIALIZE PSI SYSTEM
MOVX S1,GJ%SHT+GJ%OLD ;[0025]IS LOG FILE AROUND?
HRROI S2,[ASCIZ/PS:<SPOOL>FAL.LOG/] ;[0025]
GTJFN ;[0025]
ERJMP NOLOG ;[0025] DON'T LOG ANYTHING
RLJFN ;[0025]RELEASE THE JFN
JFCL ;[0025]DONT CARE ABOUT ERRORS
MOVEI S1,FOB.SZ ;[0025]LENGTH OF THE FOB
MOVEI S2,LOGFOB ;[0025]ADDRESS OF THE FOB
SKIPE DEBUGW ;[0025]DEBUGGING?
MOVEI S2,LOGDBG ;[0025]ADDRESS OF DEBUG FOB
$CALL F%AOPN ;[0025]APPEND OPEN
MOVEM S1,LOGIFN ;[0025]SAVE THE NEW IFN
SKIPT ;[0025]FILE OPENED OK?
NOLOG: SETOM LOGIFN ;[0025]NO, FORGET IT
SETOM FRKFLG ;SET TO CREATE INITIAL FORKS
SKIPE DEBUGW ;AM I DEBUGGING?
JRST SRVINI ;YES..JUST BECOME LISTENER
MAIN: SETZM SLPTIM ;ASSUME WE'LL WAIT FOR INTERRUPT
$CALL CHKQUE ;PROCESS IPCF MESSAGES
AOSN FRKFLG ;CHECK FORKS?
$CALL CHKFRK ;YES..CHECK OUR FORKS
SKIPL S1,LOGIFN ;GET LOGFILE IFN
$CALL F%CHKP ;CHECK POINT IT
MOVE S1,SLPTIM ;GET MAX SLEEP TIME
$CALL I%SLP ;WAIT FOR INTERRUPT
JRST MAIN
SUBTTL CHKQUE Routine to process IPCF messages
CHKQUE:
CHKQ.1: SETZB M,MESSAG ;ZERO MESSAGE ADDRESS
$CALL C%RECV ;RECEIVE A MESSAGE?
JUMPT CHKQ.9 ;[0025]YES..CHECK IT OUT
$RETF ;NO..NOTHING THERE
CHKQ.9: LOAD M,MDB.MS(S1),MD.ADR ;GET THE MESSAGE ADDRESS
MOVEM M,MESSAG ;SAVE ADDRESS
LOAD S1,.MSTYP(M),MS.TYP ;GET THE MESSAGE TYPE
MOVSI T2,-NMSGT ;NO -- SEARCH QUASAR TYPES
CHKQ.3: HRRZ T1,MSGTBL(T2) ;GET A MESSAGE TYPE
CAMN S1,T1 ;MATCH?
JRST CHKQ.4 ;YES, WIN
AOBJN T2,CHKQ.3 ;NO, LOOP
JRST CHKQ.5 ;UNKNOWN TYPE -- IGNORE IT
CHKQ.4: HLRZ T1,MSGTBL(T2) ;GET THE ROUTINE ADDRESS
PUSHJ P,0(T1) ;DISPATCH
CHKQ.5: $CALL C%REL ;RELEASE MESSAGE
CHKQ.6: JRST CHKQ.1 ;GET NEXT MESSAGE
MSGTBL: XWD LOG,MT.TXT ;Log from FAL or QUASAR ACK
NMSGT==.-MSGTBL
SUBTTL LOG message processing
LOG: $SAVE <STREAM> ;Preserve our stream
MOVE S1,.MSCOD(M) ;Get stream number from message
MOVEM S1,STREAM
HRROI S1,MSGTXT-MSGHDR(M) ;Point to text
HLRZ S2,MSGARH-MSGHDR(M) ;Get argument length
CAIG S2,1 ;Any text to log?
$RETT ;No..just return
$TEXT (,<^Q/S1/^0>) ;Log it
$RETT
SUBTTL CHKFRK Routine to check fork status
CHKFRK: $SAVE <P1>
SETZM FRKFLG ;Clear flag to say we've been here
MOVSI P1,-MAXSRV ;Get maximum fork number
CHKFR1: HRRZ S1,FRKTBL(P1) ;Get fork handle
JUMPE S1,CHKFR2 ;Next fork if handle is nill
RFSTS ;Read fork status
LOAD T1,S1,RF%STS ;Get status field
CAIE T1,.RFHLT ;Is fork halted
CAIN T1,.RFFPT ; or forced to terminate?
SKIPA ;Yes..process the error
JRST CHKFR2 ;No..check next fork
$TEXT (,<Abnormal process termination at PC ^O/S2,RHMASK/>)
$TEXT (,<Status: ^O/S1/^0>)
HRRZ S1,P1 ;Get the fork index
$CALL KILFRK ;Kill the dead fork
CHKFR2: AOBJN P1,CHKFR1 ;Check the next fork
MOVE S1,FRKCNT ;Get active fork count
CHKFR3: CAIL S1,MINSRV ;Do we have enough forks?
$RETT ;Yes..just return
$CALL CREFRK ;No..create a fork
JUMPT CHKFR3 ;Check count again
MOVEI S1,^D60 ;Set sleep time to a minute
MOVEM S1,SLPTIM
SETOM FRKFLG ;Request another check
$RETF
SUBTTL SERVER initializtion
DAPIB: $BUILD (.DISIZ) ;Dap initialization block
$SET (.DIFLG,DI%CNT,1) ;Request 1 link
$SET (.DIFLG,DI%PGM,%PGFAL) ;[0027]We are FAL
$EOB
SRV: RESET ;Clean up from last start
MOVE P,[IOWD PDLEN,PDL] ;SET UP STACK
SETZM DATORG ;Clear impure storage
MOVE S1,[DATORG,,DATORG+1]
BLT S1,DATEND-1
HRRZM T2,STREAM ;[0025]STREAM NUMBER-1
AOS STREAM ;[0025]STREAM NUMBER
HRROI S1,SRVOBJ ;Point to server name
MOVX S2,TXT(FAL) ;GET OBJECT NAME
SKIPE DEBUGW
MOVX S2,TXT(.FALDEBUG) ;[0032]debugging FAL
$CALL CPYSTR ;Copy the string
MOVEI S1,IB.SZ
MOVEI S2,SRVIB ;POINT TO IB
$CALL I%INIT ;GET THE LIBRARY
HRRZI S1,.MSIIC ;BYPASS MOUNTS
MSTR
ERJMP .+1
$CALL PSIINI ;INITIALIZE PSI SYSTEM
SETOM LOGIFN ;Not to write in logfile
SETZM FRKCNT ;I don't have any inferiors
SRVINI: MOVEI S1,.DISIZ
MOVEI S2,DAPIB
$CALL D$INIT ;Init DAPLIB
SKIPT
$FATAL (Can't initialize DAPLIB)
JRST LISTEN
SUBTTL SERVER Listening loop
DAPOB: $BUILD (.DOSIZ) ;Dap link open block
$SET (.DOFLG,DO%SRV,1) ;Become server
$SET (.DOFLG,DO%WCN,1) ;Wait for connection
$SET (.DOFLG,DO%PSI,1) ;Use PSI
$SET (.DOFLG,DO%LNK,SRVLNK) ;Use servers link
$SET (.DOPSI,DO%CDN,.ICCDN) ;Connect/Disconnect channel
$SET (.DOPSI,DO%DAV,.ICDAV) ;Data available
$SET (.DOPSI,DO%INA,.ICIMA) ;Interrupt message
$SET (.DOCID,,CHKUSR) ;Connect verification
$SET (.DONOD,,<POINT 7,SRVNOD>) ;Remote node name
$SET (.DOOBJ,,<POINT 7,SRVOBJ>) ;Requested object name
$SET (.DOUSR,,<POINT 7,SRVUSR>) ;User string
$SET (.DOPSW,,<POINT 7,SRVPSW>) ;Password string
$SET (.DOACT,,<POINT 7,SRVACT>) ;Account string
$SET (.DOOPD,,<POINT 7,SRVOPD>) ;Optional data
$EOB
DAPSRV: $BUILD (.DFSIZ)
$SET (.DFFLG,DF%LNK,SRVLNK)
$SET (.DFLFS,,<POINT 7,SRVFIL>)
$EOB
LISTEN: SKIPGE LOGIFN ;Am I the master?
$CALL CLSJFN ;Yes..close all JFN's
MOVEI S1,SRVSIZ ;Get size of server data
MOVEI S2,SRVBEG ;Get start of area to clear
$CALL .ZCHNK ;Clear it
MOVEI S1,.DOSIZ ;Get size of open block
MOVEI S2,DAPOB ;Point to open block
$CALL D$OPEN
JUMPF LISTE5 ;Close our end on failure
$TEXT (,Connection from node ^T/SRVNOD/ for ^T/SRVUSR/)
LISTE1: $CALL RELJFN ;Release unopen JFNS
MOVEI S1,.DFSIZ
MOVEI S2,DAPSRV
MOVEI T1,^D5 ;Timer retry to wait for access
$CALL D$FUNC ;Do one function
JUMPF LISTE3 ;Check link status on failure
LISTE2: MOVEI S1,^D20 ;Wait twenty seconds
$CALL I%SLP
LISTE3: MOVEI S1,SRVLNK ;Get the link index
$CALL D$STAT ;Check link status
TXNE S1,MO%EOM ;Message available?
JUMPT LISTE1 ;Yes..go process it
TXNN S1,MO%SYN!MO%ABT ;Disconnected or aborted?
TXNN S1,MO%CON ; and still connected?
JRST LISTE5 ;No..close our end
TXNE S1,MO%EOM ;Have a message available?
JRST LISTE1 ;Yes..process it
SOJG T1,LISTE2 ;No..try again
LISTE5: MOVEI S1,SRVLNK ;Point to our link
MOVEI S2,[.DCX38] ;Abort close
$CALL D$CLOS ;Close or abort the link
$TEXT (,^0) ;CLOSE THE LOG ENTRY
JRST LISTEN ;Wait for new connection
FNCTBL: TXT(Unknown)
TXT(Read)
TXT(Write)
TXT(Rename)
TXT(Delete) ;Directory connect
TXT(Unknown)
TXT(Directory)
TXT(Submit)
TXT(Execute)
SUBTTL CHKUSR Connection verification routine
;CHKUSR - Called at interrupt level from D$OPEN to validate connect
;ACCEPTS Connect info stored per pointers in D$OPEN request
;Returns TRUE S1/ User number
; S2/ Directory number
; FALSE S1/ NSP reason code
; S2/ Pointer to reason string
CHKUSR: STKVAR <<ACBLK,3>,USRNUM,<DIRPSW,10>> ;[0031] Allocate local variables
MOVX S1,RC%EMO ;Require exact match
HRROI S2,SRVUSR ;POINT TO USER NAME GIVEN
SETZM T1 ;GOOD FORM
RCUSR ;CHECK USER NUMBER
ERJMP CKUER1 ;BAD USER NAME
JUMPE T1,CKUER1 ;...
MOVEM T1,USRNUM ;SAVE USER NUMBER FOR CHKACC
MOVE S2,T1 ;GET IN PROPER AC FOR RCDIR
SETZM T1 ;GOOD FORM
RCDIR ;GET DIRECTORY FOR THIS USER
ERJMP CKUER1 ;CAN'T HAPPEN
JUMPE T1,CKUER1 ;BAD DIRECTORY HERE
MOVEM T1,.ACDIR+ACBLK ;[0031] SAVE DIRECTORY NUMBER
MOVE S1,.ACDIR+ACBLK ;[0031] GET DIRECTORY NUMBER
MOVEI S2,DIRBLK ;POINT TO THE BLOCK
MOVEI T1,.CDDAC+1 ;GET LENGTH OF ARGUMENT BLOCK
MOVEM T1,.CDLEN(S2) ;SAVE FOR THE CALL
HRROI T1,SRVACT ;POINT TO ACCOUNT STRING
SKIPN SRVACT ;ALREADY SPECIFIED?
MOVEM T1,.CDDAC(S2) ;NO, GET DEFAULT FROM DIRECTORY IF ANY
HRROI T1,DIRPSW ;POINT TO PASSWORD STRING
GTDIR ;GET ALL THE DIRECTORY STUFF
ERJMP CKUER1 ;GIVE UP
;HERE TO CHECK PASSWORD
CHKUPW: HRROI S1,SRVPSW ;[0031] Get pointer to users password
MOVEM S1,.ACPSW+ACBLK ;[0031] Save it for ACCES function
SETOM .ACJOB+ACBLK ;[0031] Default to our job number
MOVX S1,AC%PWD+3 ;[0031] Want password validation fcn
MOVEI S2,ACBLK ;[0031] Address of arg block
ACCES ;[0031] Validate the password
ERJMP CHKU.1 ;[0031] Failed,,try string compare
JRST CHKUAC ;[0031] Win,,compare account strings
CHKU.1: HRROI S1,DIRPSW ;HERE IS ACCES FAILS SINCE THE
HRROI S2,SRVPSW ;ACCES FUNCTION TO VALIDATE PSW'S
STCMP ;MAY NOT BE IMPLEMENTED IN THIS MONITOR
JUMPN S1,CKUER2 ;FAIL IF NOT EXACT
;HERE IF PASSWORDS MATCH TO VALIDATE THE ACCOUNTING DATA
CHKUAC: MOVE S1,.ACDIR+ACBLK ;[0031] GET DIRECTORY NUMBER
HRROI S2,SRVACT ;POINT TO REMOTE ACCOUNT STRING
VACCT ;VALIDATE THE ACCOUNT
ERJMP CKUER3 ;NOT VALID
MOVE S1,USRNUM ;Return user number
MOVE S2,.ACDIR+ACBLK ;[0031] Return directory number
$RETT ;Return success
;HERE IF ERROR VALIDATING USER
CKUER1: SKIPA S2,[TXT(Invalid user-id)]
CKUER2: MOVX S2,TXT(Invalid password)
MOVX S1,.DCX34 ;Generic error type
$RETF ;Return the failure
CKUER3: MOVX S1,.DCX36 ;ERROR FOR BAD ACCOUNT
MOVX S2,TXT(Invalid account)
$RETF ;Return the failure
SUBTTL CREFRK Fork creation and initializtion
;ACCEPTS No arguments
;RETURNS TRUE S1/ Count of active forks
; Fork has been started
; FALSE Server fork could not be started
CREFRK: MOVSI T2,-MAXSRV
SKIPN FRKTBL(T2) ;Fork available?
JRST CREFR1 ;Yes..use it
AOBJN T2,.-2 ;No..look at next slot
$RETF ;No more forks available
CREFR1: MOVX S1,CR%CAP+CR%ACS ;[0025]Allow forks capabilities
SETZ S2, ;[0025]POINT AT MY ACS
CFORK
ERJMP .RETF ;Give Up if CFORK fails
AOS FRKCNT ;Bump active fork count
MOVEM S1,FRKTBL(T2) ;Save fork handle
HRLZ S2,S1 ;Set up to Map my pages
MOVSI S1,.FHSLF ;Map my address space
MOVX T1,PM%RD!PM%EX!PM%CPY!PM%CNT!NFKPGS
PMAP
ERJMP CREFR2
HRRZ S1,FRKTBL(T2) ;Start the fork as a server
MOVEI S2,[JRST SRV]
SFORK
ERJMP CREFR2
MOVE S1,FRKCNT ;Return count of active forks
$RETT
CREFR2: HRRZ S1,T2 ;Get fork index
$CALL KILFRK ;Kill the fork
$RETF ;Return the failure
SUBTTL KILFRK Routine to kill a server
;ACCEPTS S1/ index into FRKTBL
;RETURNS TRUE S1/ Number of active forks
; Fork has been killed
KILFRK: SETZ T2, ;Set up to clear and fetch
EXCH T2,FRKTBL(S1) ;Get the fork stuff
HRRZ S1,T2 ;Get the fork handle
HLRZ S2,T2 ;Get offset to page
KFORK
ERJMP .+1 ;Can't happen
KILFR1: SOS S1,FRKCNT ;Decr active fork count
$RETT ;Return
SUBTTL LOGSNM Routine to log system name
LOGSNM: STKVAR <<SYSNAM,20>> ;Get some space for system name
MOVX S1,'SYSVER' ;NAME OF GETTAB FOR SYSNAME
SYSGT ;GET IT
HRLZ T1,S2 ;GET TABLE#,,0
MOVEI T2,SYSNAM ;Point to name storage
HRLI T2,-20 ;GET COUNT
LOGSN1: MOVS S1,T1 ;GET N,,TABLE#
GETAB ;GET THE ENTRY
MOVEI S1,0 ;USE ZERO IF LOSING
MOVEM S1,(T2) ;STORE THE RESULT
ADDI T1,1 ;POINT TO NEXT ENTRY
AOBJN T2,LOGSN1 ;GET IT
HRROI S1,SYSNAM ;POINT TO THE NAME
$TEXT (,<^Q/S1/>)
$RETT ;RETURN TRUE
SUBTTL LOGMSG Text output routine for Superior FAL
LOGMSG: SKIPE LOGHDR ;First time here
JRST LOGMS1 ;No..proceed
$TEXT (LOGCHR,<^H/[-1]/^A>) ;Yes..write the header
SKIPE STREAM ;Am I inferior?
$TEXT (LOGCHR,< SRV-^D1/STREAM/ ^A>) ;Yes..log srv-n
SKIPN STREAM
$TEXT (LOGCHR,< ^A>) ;No..display a tab
SETOM LOGHDR
LOGMS1: JUMPE S1,LOGMS2 ;End of message?
SKIPL LOGHDR ;Ready for indention?
$TEXT (LOGCHR,< ^A>) ;yes..do it
SETOM LOGHDR ;Clear indention flag
CAIN S1,.CHLFD ;Unless this is a line feed
MOVNS LOGHDR ; Store a +1
PJRST LOGCHR ;Log the character and return
LOGMS2: SKIPG LOGHDR ;Was the last thing a line feed?
$TEXT (LOGCHR,<>) ;No..write one
SETZM LOGHDR ;Clear the header flag
$RETT ;And return
LOGCHR: MOVE S2,S1 ;No..move character to S2
SKIPL S1,LOGIFN
$CALL F%OBYT ;Write the character
$RETT
SUBTTL MSGCHR Text output routine routine for inferior servers
MSGCHR: SKIPE LOGHDR ;First time here?
JRST MSGCH1 ;Store the character
MOVE S2,[POINT 7,MSGTXT] ;Point to IPCF message block
MOVEM S2,MSGPTR ;Store the pointer
MOVEI S2,MSGSIZ ;Get max character count
MOVEM S2,MSGCNT ;Store the count
SETOM LOGHDR ;Flag headers set
MSGCH1: SOSLE MSGCNT ;Bump character count
IBP MSGPTR ;Bump the pointer
DPB S1,MSGPTR ;Store the character
JUMPN S1,.RETT ;Return if not null
IDPB S1,MSGPTR ;Store the null
SETZM LOGHDR ;Clear the log header flag
MSGCH2: MOVEI S1,MT.TXT ;Get text message type
MOVEM S1,MSGHDR ;Store it in header
MOVEI S1,.CMTXT ;Get text argument type
MOVEM S1,MSGARH ;Store in Argument header
MOVE S1,MSGPTR ;Get message pointer
MOVEI S1,-MSGARC(S1) ;Get argument length
HRLM S1,MSGARH ;Save size in arg header
AOS MSGARC ;Increment argument count
ADDI S1,MSGARH-MSGHDR ;Get size of message
HRLM S1,MSGHDR ;Save in the header
MOVEI S2,MSGHDR ;Point to the message
PJRST SNDFAL ;Send the message to FAL
$RETT
SUBTTL SNDFAL Routine to send IPCF packet to FAL
;ACCEPTS S1/ Length of message
; S2/ Address of message
SNDFAL: MOVE T1,FALPID
MOVEM T1,SNDSAB+SAB.PD ;Send only to FAL
SNDMSG: MOVE T1,STREAM ;Get my stream number
MOVEM T1,.MSCOD(S2) ;Save in message
MOVEM S1,SNDSAB+SAB.LN ;Store the length
MOVEM S2,SNDSAB+SAB.MS ;Store the address
MOVEI S1,SAB.SZ
MOVEI S2,SNDSAB
$CALL C%SEND
$RETT ;Don't care about failures
;RELJFN QUICKY ROUTINE TO RELEASE ALL NON-OPEN JFNS
;ACCEPTS NO ARGUMENTS
;RETURNS TRUE ALWAYS
CLSJFN::SKIPA S1,[EXP CZ%ABT!.FHSLF] ;ABORT ALL FILE OPERATIONS
RELJFN::MOVX S1,CZ%NCL!.FHSLF ;RELEASE ALL NON-OPEN JFNS
CLZFF
ERJMP .+1 ;Ignore any errors
$RETT ;RETURN
;CPYSTR QUICKY ROUTINE TO COPY ASCIZ TEXT
;ACCEPTS S1/ DESTINATION POINTER
; S2/ SOURCE POINTER
CPYSTR: SETZ T1, ;Terminate on Null
SOUT
$RET
SUBTTL PSIINI Software interrupt system initialization
PSIINI: MOVEI S1,.FHSLF ;Initialize for me
MOVE S2,[LEVTAB,,CHNTAB] ;Point to tables
SIR
MOVX S2,1B<.ICIPC>!1B<.ICCDN>!1B<.ICDAV>!1B<.ICIMA>!1B<.ICIFT>
AIC ;Turn on selected channels
EIR ;Enable requests
$RETT
SUBTTL Interrupt service routines
INTPSI: $BGINT 1
$CALL C%INTR ;Flag the message
$DEBRK
INTCDN: $BGINT 1
MOVEI S1,SRVLNK ;POINT TO OUR LINK
MOVEI S2,.DICDN ;Get interrupt cause
$CALL D$INTR
$DEBRK
INTDAV: $BGINT 1
MOVEI S1,SRVLNK ;POINT TO OUR LINK
MOVEI S2,.DIDAV ;Get interrupt cause
$CALL D$INTR
$DEBRK
INTINA: $BGINT 1
MOVEI S1,SRVLNK ;POINT TO OUR LINK
MOVEI S2,.DIINA ;Get interrupt cause
$CALL D$INTR
$DEBRK
INTIFT: $BGINT 1 ;Inferior fork termination
SETOM FRKFLG ;Request fork status check
$DEBRK ;Dismiss for now
SUBTTL Literals
;Dump the literals
LSTOF.
LIT
LSTON.
SUBTTL Interrupt tables
.PSECT DATA ;Load into impure storage
LEVTAB: LEV1PC
EXP 0
EXP 0
;INTERRUPT CHANNELS
RADIX 5+5
CHNTAB:
ICHPSI: 1,,INTPSI ;PSI interrupts
ICHDAV: 1,,INTDAV ;Data available
ICHCDN: 1,,INTCDN ;Connect/Disconnect
ICHINA: 1,,INTINA ;Interrupt message
ICH004: BLOCK 1 ;ASSIGNABLE CHANNEL 4
ICH005: BLOCK 1 ;ASSIGNABLE CHANNEL 5
ICHAOV: BLOCK 1 ;ARITHMETIC OVERFLOW
ICHFOV: BLOCK 1 ;FLOATING OVERFLOW
ICH008: BLOCK 1 ;RESERVED
ICHPOV: BLOCK 1 ;PDL OVERFLOW
ICHEOF: BLOCK 1 ;END OF FILE
ICHDAE: BLOCK 1 ;DATA ERROR
ICHQTA: BLOCK 1 ;QUOTA EXCEEDED
ICH013: BLOCK 1 ;RESERVED
ICHTOD: BLOCK 1 ;TIME OF DAY (RESERVED)
ICHILI: BLOCK 1 ;ILLEG INSTRUCTION
ICHIRD: BLOCK 1 ;ILLEGAL READ
ICHIWR: BLOCK 1 ;ILLEGAL WRITE
ICHIEX: BLOCK 1 ;ILLEGAL EXECUTE (RESERVED)
ICHIFT: 1,,INTIFT ;INFERIOR FORK TERMINATION
ICHMSE: BLOCK 1 ;MACHINE SIZE EXCEEDED
ICHTRU: BLOCK 1 ;TRAP TO USER (RESERVED)
ICHNXP: BLOCK 1 ;NONEXISTENT PAGE REFERENCED
ICH023: BLOCK 1 ;ASSIGNABLE CHANNEL 23
ICH024: BLOCK 1 ;ASSIGNABLE CHANNEL 24
ICH025: BLOCK 1 ;ASSIGNABLE CHANNEL 25
ICH026: BLOCK 1 ;ASSIGNABLE CHANNEL 26
ICH027: BLOCK 1 ;ASSIGNABLE CHANNEL 27
ICH028: BLOCK 1 ;ASSIGNABLE CHANNEL 28
ICH029: BLOCK 1 ;ASSIGNABLE CHANNEL 29
ICH030: BLOCK 1 ;ASSIGNABLE CHANNEL 30
ICH031: BLOCK 1 ;ASSIGNABLE CHANNEL 31
ICH032: BLOCK 1 ;ASSIGNABLE CHANNEL 32
ICH033: BLOCK 1 ;ASSIGNABLE CHANNEL 33
ICH034: BLOCK 1 ;ASSIGNABLE CHANNEL 34
ICH035: BLOCK 1 ;ASSIGNABLE CHANNEL 35
RADIX 8
.ENDPS DATA
SUBTTL IMPURE Storage
.PSECT DATA
DEFINE $DATA (NAME,SIZE<1>) <
NAME: BLOCK SIZE
..LOC==.>
$DATA FRKTBL,MAXSRV ;LH offset to fork data pages
$DATA STREAM,1 ;My stream number
$DATA FALPID,1 ;Fal's pid
$DATA MESSAG,1 ;Address of latest IPCF message
$DATA FRKFLG,1 ;-1 to check fork status
$DATA FRKCNT,1 ;Count of active forks
$DATA SLPTIM,1 ;Max time to sleep in main loop
$DATA LOGIFN,1 ;Logfile IFN
;RH fork handle
$DATA DATORG,0 ;Start of area to clear
;Interrupt PC locations
$GDATA LEV1PC,1 ;RETURN PC FOR INTERRUPT LEVEL 1
$DATA PDL,PDLEN ;PUSH DOWN POINTER
$DATA SRVOBJ,5 ;Requested object name
$DATA SRVBEG,0 ;Start of area to clear for SRV
$DATA SRVNOD,2 ;Remote node name
$DATA SRVUSR,^D8 ;[0026]Remote user name
$DATA SRVPSW,^D8 ;[0026]Remote password string
$DATA SRVACT,^D8 ;[0026]Remote account string
$DATA SRVOPD,5 ;Optional data
$DATA SRVFIL,FILSIZ ;Remote file spec
$DATA DIRBLK,.CDDAC+1 ;Size of directory storage
SRVSIZ==.-SRVBEG
$DATA REMSWS,1 ;Remote file switches
$DATA SNDSAB,SAB.SZ
$DATA MSGPTR,1 ;Pointer to log message char
$DATA MSGCNT,1 ;Remaining room in MSGTXT
;IPCF message area
$DATA MSGHDR,MSHSIZ ;Message header area
$DATA MSGARF ;Message argument flags
$DATA MSGARC ;Message argument count
$DATA MSGARH ;Message argument header
$DATA MSGTXT,<MSGSIZ/5+1> ;Message body goes here
$DATA ERRTXT,^D30 ;Room to store error text
$DATA LOGHDR,1 ;LOG HEADER FLAG
.ENDPS DATA ;End of Impure storage
END <3,,ENTVEC>