Trailing-Edge
-
PDP-10 Archives
-
BB-H138F-BM_1988
-
7-sources/ptycon.mac
There are 31 other files named ptycon.mac in the archive. Click here to see a list.
; *** Edit 33 to PTYCON.MAC by GSCOTT on 13-Aug-87, for SPR #21652
; After installing edit 32, PTYCON doesn't go back into terminal input wait
; properly if a command is being typed in at the same time that output from a
; subjob is being displayed. This edit also makes PTYCON check for subjob
; output to be displayed after each "subjob-text" command.
; *** Edit 32 to PTYCON.MAC by GSCOTT on 14-Apr-87, for SPR #21346
; Fix PTYCON not to generate extra PTYOPC interrupts, not to enable PTYOPC when
; connected to a subjob, and to reenter a WAIT JSYS instead of going back to
; COMND when PTYOPC interrupts us causing a PTY Hungry interrupt.
; *** Edit 31 to PTYCON.MAC by LOMARTIRE on 31-Mar-86, for SPR #20838
; Prevent PDL overflow after CONTROL-C processing
; UPD ID= 143, SNARK:<6.1.UTILITIES>PTYCON.MAC.11, 14-Jun-85 13:22:02 by EVANS
;TCO 6.1.1450 - Make PUSH know about DEFAULT-EXEC:
; UPD ID= 118, SNARK:<6.1.UTILITIES>PTYCON.MAC.10, 30-Apr-85 14:53:44 by LOMARTIRE
;TCO 6.1.1349 - In PTYINT, restore the ACs in the right place to avoid panic
; UPD ID= 617, SNARK:<6.UTILITIES>PTYCON.MAC.9, 23-Oct-84 16:23:25 by LOMARTIRE
;TCO 6.2248 - Make the fields of the WHAT command line up in columns.
; UPD ID= 545, SNARK:<6.UTILITIES>PTYCON.MAC.8, 6-Jun-84 15:28:49 by LOMARTIRE
;TCO 6.2079 - Change order of command parse and fix subjob name parsing
; UPD ID= 473, SNARK:<6.UTILITIES>PTYCON.MAC.7, 8-Feb-84 10:38:41 by EVANS
;Add flag to edit number so I VER will display it in decimal.
; UPD ID= 349, SNARK:<6.UTILITIES>PTYCON.MAC.6, 7-Sep-83 16:32:09 by LOMARTIRE
;More TCO 6.1566 - Clean up comments and error messages
; UPD ID= 286, SNARK:<6.UTILITIES>PTYCON.MAC.5, 20-May-83 13:50:46 by LOMARTIRE
;More TCO 6.1566 - Don't append CR and LF to end of one-liner; only append CR
; UPD ID= 256, SNARK:<6.UTILITIES>PTYCON.MAC.4, 12-Apr-83 15:56:19 by LOMARTIRE
;TCO 6.1595 - Fix hanging while processing commands from .ATO file
; UPD ID= 255, SNARK:<6.UTILITIES>PTYCON.MAC.3, 12-Apr-83 12:58:33 by LOMARTIRE
;More TCO 6.1566 - Fix problem with printing of subjob output header
; UPD ID= 243, SNARK:<6.UTILITIES>PTYCON.MAC.2, 1-Apr-83 09:07:34 by LOMARTIRE
;TCO 6.1566 - Convert command parsing routines to COMND JSYS
; UPD ID= 65, FARK:<5-1-WORKING-SOURCES.UTILITIES>PTYCON.MAC.4, 2-Dec-82 11:53:20 by LOMARTIRE
;Edit 16 - Restrict access to PTY JFNs so that lower EXECs don't CLOSE them
; UPD ID= 18, FARK:<5-WORKING-SOURCES.UTILITIES>PTYCON.MAC.3, 5-May-82 13:15:16 by MOSER
;EDIT 15 - CHANGE EDIT NUMBER TO 15.
; UPD ID= 5, FARK:<5-WORKING-SOURCES.UTILITIES>PTYCON.MAC.2, 5-Apr-82 09:14:41 by DONAHUE
;Edit 8 - Release log file at exit so LPT files printed
;<5.UTILITIES>PTYCON.MAC.7, 28-Oct-81 15:34:11, EDIT BY GRANT
;Change major version to 5
; UPD ID= 23, SNARK:<5.UTILITIES>PTYCON.MAC.6, 13-Aug-81 09:40:16 by DONAHUE
;TCO 5.1452 - Log the filename to a GET command into the log file
; UPD ID= 20, SNARK:<5.UTILITIES>PTYCON.MAC.5, 6-Aug-81 15:27:30 by DONAHUE
;TCO 5.1445 - If <esc> terminates jobname in DEFINE command, wait for more input
; UPD ID= 1768, SNARK:<5.UTILITIES>PTYCON.MAC.4, 25-Mar-81 17:48:44 by GRANT
;Update Copyright
; UPD ID= 1500, SNARK:<5.UTILITIES>PTYCON.MAC.3, 26-Jan-81 16:53:59 by MURPHY
;UPDATE LOG FILE LESS OFTEN
;IMPLEMENT SAVE (INPUT TO FILE) COMMAND
; UPD ID= 997, SNARK:<5.UTILITIES>PTYCON.MAC.2, 11-Sep-80 10:55:07 by SCHMITT
;TCO 5.1143 - Replace DING fork with a TIMER mechanism for dinging terminal
; UPD ID= 379, SNARK:<4.1.UTILITIES>PTYCON.MAC.3, 26-Mar-80 15:49:52 by KONEN
;TCO 4.1.1125 -- Correct PTY buffers overlapping each other
; UPD ID= 243, SNARK:<4.1.UTILITIES>PTYCON.MAC.2, 4-Feb-80 14:53:28 by MURPHY
;PREVENT HANG WHEN HIGH OUTPUT RATE FROM SUBJOB ON 2020 (TIMING PROB)
;<4.UTILITIES>PTYCON.MAC.9, 24-Oct-79 15:38:07, EDIT BY ENGEL
;ADD CODE TO AT PTYOU3 TO CHECK FOR PTY BUFFER FULL. DO DIBE IF IT IS FULL.
;<4.UTILITIES>PTYCON.MAC.8, 9-Oct-79 17:12:38, Edit by SCHMITT
;TCO 4.2522 - Remove RLJFN after GET for push to EXEC and supporting changes
;<4.UTILITIES>PTYCON.MAC.7, 27-Sep-79 18:10:48, EDIT BY SCHMITT
;TCO 4.2497 - Cure ghost characters from appearing in PTY's input buffer
;<4.UTILITIES>PTYCON.MAC.6, 13-May-79 13:38:16, EDIT BY MILLER
;<4.UTILITIES>PTYCON.MAC.5, 12-May-79 13:12:46, EDIT BY MILLER
;<4.UTILITIES>PTYCON.MAC.4, 12-May-79 13:11:59, EDIT BY MILLER
;<4.UTILITIES>PTYCON.MAC.3, 12-May-79 13:09:56, EDIT BY MILLER
;MORE
;<4.UTILITIES>PTYCON.MAC.2, 11-May-79 15:45:23, EDIT BY MILLER
;MAKE VARIOUS FIXES TO INSURE THAT CHARACTERS TYPED ON THE TTY
; HAVE THE CORRECT PARITY.
;<4.UTILITIES>PTYCON.MAC.1, 12-Mar-79 14:13:24, EDIT BY KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1976,1977,1978,1979,1980,1981 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
TITLE PTYCON - CONTROLLER FOR JOBS ON PTY'S
SUBTTL PETER M. HURLEY APRIL 18,1974
SEARCH MONSYM,MACSYM
IFNDEF .PSECT,<
.DIRECT .XTABM>
SALL
; VERSION NUMBER DEFINITIONS
VMAJOR==6 ;MAJOR VERSION OF PTYCON
VMINOR==0 ;MINOR VERSION NUMBER
VEDIT==VI%DEC+^D33 ;EDIT NUMBER
VWHO==0 ;GROUP WHO LAST EDITED PROGRAM (0=DEC DEVELOPMENT)
VPTYCN== <VWHO>B2+<VMAJOR>B11+<VMINOR>B17+VEDIT
A=1 ;TEMPORARY AC, NOT SAVED BY SUBROUTINES
B=2 ;TEMP
C=3 ;TEMP
D=4 ;TEMP
E=5 ;TEMP
Q1=6 ;PRESERVED ACS, MUST BE SAVED
Q2=7 ;PRESERVED AC
Q3=10 ;PRESERVED AC
P1=11 ;PRESERVED AC
P2=12 ;PRESERVED AC
P3=13 ;PRESERVED AC
P4=14 ;PRESERVED AC
I=15 ;PRESERVED, HOLDS CURRENT SUBJOB INDEX
P=17 ;PUSH DOWN AC
MAXPTC==^D80 ;SIZE OF THE PTY BUFFER
PTYNCH==6 ;# OF INTERRUPT CHANNELS FOR PTY'S
PTYCHN==^D24 ;STARTING AT 24, 2 CHANNELS PER PTY
;FLAGS IN LEFT HALF OF PTYSTS
PTIGNF==1 ;IGNORE OUTPUT FROM THIS PTY
PTREFF==2 ;REFUSE OUTPUT FROM THIS PTY
STDECH=="X"-100 ;STANDARD ESCAPE CHARACTER
STDESC==1B<STDECH> ;CHANNEL MASK FOR ESCAPE CHARACTER
CNTRLO==1B15 ;CONTROL-O MASK
CNTRLC==1B<.TICCC> ;CONTROL-C MASK
TYPINM==1B<.TICTI> ;TYPIN OCCURRED MASK
ALLMSK==[777777,,700000] ;"ALL" COMPARISON MASK
TABSIZ==13 ;WIDTH OF A TAB FOR THE WHAT COMMAND
DEFINE BUG(X,Y)<
JRST [PUSH P,A
HRROI A,[ASCIZ/
? Unexpected PTYCON error - Y
/]
PUSHJ P,TTSOUT
POP P,A
IFIDN <X> <HLT>,<HALTF>
JRST .+1]>
DEFINE ERRMES (MESSAGE)<
PUSHJ P,[MOVEI A,.PRIIN ;CLEAR TYPE AHEAD
CFIBF
PUSHJ P,CHKLM ;ON LEFT MARGIN?
PUSHJ P,CRLF ;NO, TYPE CR-LF
HRROI A,[ASCIZ/MESSAGE
/]
JRST TTSOUT]>
DEFINE WRNMES (MESSAGE)<
PUSHJ P,[PUSH P,B ;SAVE ERROR CODE
PUSHJ P,CHKLM ;ON LEFT MARGIN?
PUSHJ P,CRLF ;NO, TYPE CR-LF
POP P,B ;RESTORE ERROR CODE
HRROI A,[ASCIZ/MESSAGE/]
JRST TTSOUT]>
DEFINE SYSGET(X)<
MOVE A,[SIXBIT/X/]
SYSGT
HRRZM B,X>
;MACRO TO PARSE NOISE WORDS
DEFINE NOISE (GWRD) <
MOVEI A,CMDSBK
MOVEI B,[FLDDB. .CMNOI,,<-1,,[ASCIZ /GWRD/]>]
COMND ;PARSE NOISE WORDS
ERJMP FJERR ;FATAL JSYS ERROR
TXNE A,CM%NOP ;ERROR DURING NOISE PARSE?
JRST COMERR> ;YES, OUTPUT ERROR MESSAGE
;MACRO TO CONFIRM COMMAND
DEFINE CONFIRM <
MOVEI A,CMDSBK
MOVEI B,[FLDDB. .CMCFM]
COMND ;PARSE CONFIRMATION
ERJMP FJERR ;FATAL JSYS ERROR
TXNE A,CM%NOP ;ERROR DURING CONFIRM PARSE?
JRST COMERR ;YES, OUTPUT ERROR MESSAGE
TRYLOG> ;TRY TO LOG COMMAND
DEFINE TRYLOG < ;TRY TO LOG COMMAND LINE
HRROI A,CMDBUF ;TRY TO LOG COMMAND
PUSHJ P,TTSLOG
SKIPE RDJFN ;PROCESSING A COMMAND FILE?
PUSHJ P,PRTCMD> ;PRINT COMMAND LINE
;PROGRAM ENTRY VECTOR
ENTVEC: JRST PTYSRT ;STARTING LOCATION
JRST PTYCON ;REENTER LOCATION
VPTYCN ;VERSION NUMBER
PTYSRT: RESET ;FRESH START
PTYCON: MOVE P,[IOWD PDLEN,PDL] ;SET UP STACK
SETZM PUSHF ;NOT PUSHED DOWN A LEVEL NOW
SETZM IOWATF ;INITIALIZE WAITING FOR INTERRUPT FLAG
SETOM NOINT ;NO PTY INTERRUPTS UNCONDITIONALLY
MOVE A,[SIXBIT/PTYPAR/] ;GET # OF PTYS IN SYSTEM
SYSGT ;...
HRRZM A,FIRPTY ;STORE TTY CORRESPONDENCE FOR PTY'S
HLRZS A ;GET NUMBER OF PTY'S IN SYSTEM
MOVEM A,SYSPTY ;REMEMBER THE NUMBER OF PTY'S ON SYSTEM
CAILE A,MAXPTY ;TOO HIGH?
MOVEI A,MAXPTY ;YES
MOVEM A,NUMPTY ;REMEMBER # OF PTYS
SYSGET (TTYJOB) ;GET TABLE # OF GETAB ENTRIES
SYSGET (JOBPNM)
SYSGET (SNAMES)
SYSGET (JOBRT)
MOVE A,[STDESC] ;SET UP ENABLE MASK FOR SUBJOBS
SKIPN ESCMSK ;WAS ONE ALREADY SET UP?
MOVEM A,ESCMSK ;NO, USE THE STANDARD ONE
MOVE A,[STDESC+CNTRLO+CNTRLC+TYPINM] ;MASK FOR TERMINAL INTERRUPT
SKIPN TIMASK ;HAS THIS BEEN SET UP ALREADY?
MOVEM A,TIMASK ;NO, SET IT TO BE STANDARD
MOVEI A,STDECH ;GET STD ESCAPE CHARACTER
SKIPN TRPCHR ;BEEN SET UP YET?
MOVEM A,TRPCHR ;NO, SET IT UP ON FIRST TIME THROUGH
MOVEI A,400000 ;SET UP CAPABILITIES OF JOB
RPCAP ;GET CURRENT CAPABILITIES
TLNN B,(1B0) ;CAN WE ENABLE CONTROL-C INTERCEPT?
BUG(HLT,<cannot enable for CONTROL-C intercept>)
TLON C,(1B0) ;YES, THEN DO IT
EPCAP ;SET THIS ENABLE BIT
MOVEI A,400000 ;NOW INITIALIZE THE INTERRUPT SYSTEM
DIR ;FIRST TURN IT OFF
SETOM PICNT ;INITIALIZE LEVEL OF PIOFF'S
MOVE B,[LEVTAB,,CHNTAB] ;SET UP PI SYSTEM
SIR
HRLZ A,TRPCHR ;ENABLE ESCAPE CHARACTER
HRRI A,TRPCHN ;ON ITS OWN CHANNEL
ATI ;...
HRLI A,.TICCC ;CONTROL-C INTERRUPT CODE
HRRI A,CTLCHN ;CONTROL-C CHANNEL
ATI ;ASSIGN CONTROL-C TO CHANNEL
HRLI A,.TICTI ;TYPEIN OCCURRED CODE
HRRI A,TINCHN ;TYPIN CHANNEL
ATI ;ASSIGN TO CHANNEL
MOVEI A,.FHSLF ;NOW ACTIVATE ALL DESIRED CHANNELS
MOVE B,ONCHNS
AIC
EIR ;ENABLE PI SYSTEM
MOVX B,1B<PTYOCN> ;START UP PTY OUTPUT CHECK
IIC
;**;[32] Remove 4 lines at PTYCON+34 GAS 14-Apr-87
MOVEI A,.PRIIN ;SET TERMINAL MODE WORD
GDSTS ;GET PARITY ADD BIT
ERCAL [ SETZM B
RET] ;NO PARITY
ANDX B,GD%PAR ;ISOLATE INTERESTING BIT
MOVEM B,ADDPAR ;REMEMBER IT
RFMOD ;GET CURRENT MODE
SKIPN SAVMOD ;WAS IT SAVED BEFORE?
MOVEM B,SAVMOD ;NO, THIS IS FIRST TIME THROUGH
MOVE B,SAVMOD ;GET ORIGINAL MODE
TRO B,17B23!3B29!1B31 ;SET BREAK ON EVERYTHING, ASCII, UPPER
SFMOD ;...
STPAR ;...
RFCOC ;GET ECHO MODES
TRZ C,3B19 ;MAKE ALTMODES NOT ECHO
SFCOC
GTTYP ;GET TERMINAL TYPE ...
MOVEM B,SAVTYP ; ... AND SAVE IT
MOVEI A,.PRIIN
MOVEM A,TERJFN ;USE NON-BINARY CHANNEL FOR COMMAND PARSING.
MOVE A,BINTTY ;GET ANY PREVIOUS BINARY CHANNEL.
CLOSF ;CLOSE IT
JFCL ;FAILURE PROBABLY BECAUSE IT WAS NEVER OPEN.
MOVSI A,(GJ%SHT) ;PREPARE TO OPEN BINARY CHANNEL ON TTY.
HRROI B,[ASCIZ /TTY:/] ;THIS IS FOR PIPELINE FOR SUBJOBS.
GTJFN
BUG(HLT,<couldn't get handle on TTY for binary channel>)
MOVEM A,BINTTY ;SAVE THE BINARY CHANNEL.
MOVE B,[100000,,OF%WR+OF%RD]
OPENF ;OPEN IT IN BINARY MODE (IMPLIED BY 8 BIT BYTESIZE)
BUG(HLT,<couldn't open the TTY in binary for PTY communication>)
MOVE A,[1B10+1B12+1B13] ;SETUP PROGRAM BREAK MASK
MOVEM A,PGMSK ;ALLOW ONLY LF, FF, OR CR
SETZM PGMSK+1 ;AS VALID BREAK CHARACTERS
SETZM PGMSK+2
SETZM PGMSK+3
JRST COMLVL ;GO TO COMMAND LEVEL
;COMMAND LEVEL
COMLVL: SETOM NOINT ;NO PTY INTERRUPTS UNCONDITIONALLY
SKIPE A,JFNIP ;HAS A FILE JFN BEEN OBTAINED?
PUSHJ P,RELJFN ;YES, RELEASE IT
;**;[33] Delete one line at COMLVL+3 GAS 9-Aug-87
MOVNI A,5 ;NOW GRAB ALL TERMINAL INTERRUPT CHARS
RTIW ;READ CURRENT
SKIPN SAVTIW ;WAS IT SAVED ALREADY?
MOVEM B,SAVTIW ;NO, SAVE IT FOR EXITING
MOVE B,TIMASK ;ONLY ESCAPE CHARACTER AND CONTROL-O
STIW ; ARE SPECIAL
PUSHJ P,CHKLM ;SEE IF AT START OF LINE
PUSHJ P,CRLF ;NO, TYPE CR-LF
MOVE A,PMTPR ;PRINT PROMPT
PUSHJ P,TTSOUT
SETZM CMDBUF
HRLI A,CMDBUF ;CLEAR COMMAND AND ATOM BUFFERS
HRRI A,CMDBUF+1
BLT A,GTJBLK-1
MOVEI A,CBUFSZ*5-1 ;RESET BUFFER SIZE
MOVEM A,CMDSBK+.CMCNT
TIME ;GET REAL TIME
SKIPE RDJFN ;INPUT COMING FROM FILE?
CAML A,NXLOGC ;YES, TIME TO UPDATE LOG?
CALL [ ADDI A,^D60000 ;COMPUTE TIME FOR NEXT UPDATE
MOVEM A,NXLOGC
CALLRET LOGCLS] ;CLOSE AND REOPEN LOG FILE IN CASE CRASH
SKIPE RDJFN ;READING FROM FILE?
PUSHJ P,GCNVT ;YES, READ AND CONVERT COMMAND FORM FILE
SETZM TOFLAG ;INITIALIZE TYPOUT OCCURRED FLAG
;**;[33] Delete 1 line at COMSTR-2 GAS 9-Aug-87
;**;[32] Add 1 line at COMSTR-1 GAS 14-Apr-87
SETZM TIWATF ;[32] We need to go back into terminal input
COMSTR: SETOB I,LSTHDR ;ALWAYS CLEAR SUBJOB INDEX
;**;[33] Add 1 line at COMSTR+1 GAS 9-Aug-87
SETZM NOINT ;[33] Allow PTY interrupts
MOVEM I,CURENT ;SAVE CURRENT INDEX OF JOB
MOVEI A,.NULIO ;DON'T PRINT PROMPT AGAIN
HRRM A,CMDSBK+.CMIOJ
;**;[32] Add 8 lines and label COM1 at COMSTR+4 GAS 14-Apr-87
SKIPN TIWATF ;[32] Do we need to go into ti wait?
JRST COM1 ;[32] Yes, go into terminal input wait
SETOM WAITF ;[32] Indicate to TYPIN we are waiting
;[32] Most interrupts will return here
WAIT% ;[32] No, just wait here
SETZM WAITF ;[32] No longer waiting
;[32] Here when ready to read a command from file or terminal.
COM1: MOVEI A,CMDSBK ;[32] Get command state block
MOVEI B,[FLDDB. .CMINI] ;GET INITIALIZE FUNC. DESC. BLOCK
;**;[32] Add 1 line at COM1+2 GAS 14-Apr-87
SETOM TIWATF ;[32] No need to go back into TI wait
COMND ;INITIALIZE COMND
ERJMP FJERR ;FATAL JSYS ERROR
SKIPE RDJFN ;READING FROM FILE?
JRST [ MOVE A,CMDCNT ;GET CHARACTER COUNT
MOVEM A,CMDSBK+.CMINC ;SET AS NUMBER OF UNPARSED CHARS
JRST COM0]
COM0: MOVE P,[IOWD PDLEN,PDL] ;SET UP A FRESH PUSH DOWN LIST
SETZM IOWATF ;CLEAR WAITING FOR INTERRUPT FLAG
SETZM NOFLAG ;INITIALIZE NEGATE FLAG
SETZM IGNORF ;CLEAR IGNORE FLAG
SETZM NODEF ;ALLOW DEFAULT OF "ALL"
SETZM CONDEF ;CLEAR CONNECT DEFAULT SUBJOB
SETOB I,LSTHDR ;ALWAYS CLEAR SUBJOB INDEX
MOVEM I,CURENT ;SAVE CURRENT INDEX OF JOB
SETOM LMFLAG ;USE RFPOS IN CHKLM
MOVEI A,.PRIOU ;SETUP INITIAL OUTPUT JFN
SKIPE RDJFN ;READING FROM A FILE?
MOVEI A,.NULIO ;YES, RESET OUTPUT JFN
HRRM A,CMDSBK+.CMIOJ
MOVEI A,.PRIIN ;INITIALIZE MODE OF TTY
MOVE B,SAVMOD ;
TLZ B,(1B0) ;CLEAR CNTRL-O
SFMOD ;
MOVE A,CMDSBK ;GET FIRST WORD OF BLOCK
TXO A,CM%WKF ;SET TO PARSE AFTER EVERY FIELD
MOVEM A,CMDSBK
COM2: MOVEI A,CMDSBK ;GET COMMAND STATE BLOCK
MOVEI B,CBLK ;FUNCTION BLOCK
COMND ;PARSE KEYWORD
ERJMP FJERR ;FATAL JSYS ERROR
;**;[32] Add 1 line at COM2+4 GAS 14-Apr-87
SETZM TIWATF ;[32] Need to go back into terminal input wait
SETOM NOINT ;DISALLOW PTY INTERRUPTS UNCONDITIONALLY
TXNE A,CM%NOP ;PARSE OK?
JRST COMERR ;NO, ERROR
HRRZS C ;ISOLATE USED FUNCTION BLOCK
MOVE D,CMDSBK+.CMPTR ;GET POINTER TO NEXT FIELD TO BE PARSED
ILDB D,D ;GET THE NEXT CHARACTER
CAIE D,"-" ;IS IT A DASH?
JRST COM3 ; NO, CONTINUE WITH PARSING
CAIE C,CBLK ; YES, DID THE PARSE THINK IT WAS A COMMAND?
JRST COM3 ; NO, SO EVERYTHING IS FINE, PROCEED
SETZM C ; YES, CLEAR WHATEVER FUNCTION BLOCK MAY BE
JRST CMDSJN ;PARSE SUBJOB NAME INSTEAD OF COMMAND
COM3: PUSH P,B ;SAVE ADDRESS
MOVEM B,ARGS+1 ;SAVE TABLE ADDRESS OR NUMBER
MOVE B,ATMBUF ;PLACE ATOM BUFFER
MOVEM B,ARGS ;IN TEMP STORAGE
HRRZM C,ARGS+2 ;SAVE FUNCTION BLOCK USED
MOVE A,CMDSBK ;GET FIRST WORD OF BLOCK
TXZ A,CM%WKF ;DON'T PARSE AFTER EVERY FIELD
MOVEM A,CMDSBK
POP P,B ;RETRIEVE ADDRESS
CAIE C,NBLK ;WAS A SUBJOB NUMBER ENTERED?
CAIE C,CBLK ;OR A SUBJOB NAME?
JRST SINGLE ;YES, GET TEXT FOR SINGLE LINE COMMAND
HRRZ B,(B) ;GET DISPATCH ADDRESS
JRST (B) ;DISPATCH TO ROUTINE
NOCOMM: MOVEI A,CMDSBK ;GET COMMAND STATE BLOCK
MOVEI B,[FLDDB. .CMKEY,,NOTBL] ;SETUP FUNC. DESC. BLK FOR NO
COMND ;PARSE NO COMMAND
ERJMP FJERR ;FATAL JSYS ERROR
TXNE A,CM%NOP ;PARSE A LEGAL NO COMMAND?
JRST COMERR ;NO, OUTPUT ERROR MESSAGE
SETOM NOFLAG ;SET FLAG TO SIGNAL COMMANDS
HRRZ B,(B) ;GET DISPATCH ADDRESS
JRST (B) ;DISPATCH TO ROUTINE
CMDSJN: PUSH P,A ;SAVE REGISTERS
PUSH P,B
MOVEI A,NAMTBL ;SEARCH NAMTBL
SETZM ATMBUF+1 ;TRUNCATE SUBJOB NAME ENTERED
HRROI B,ATMBUF ;POINT TO TRUNCATED NAME
TBLUK ;TRY TO FIND NAME
ERJMP .+1 ;IGNORE ERROR
TXNN B,TL%NOM ;WAS NAME FOUND?
SKIPN ATMBUF ;AND WAS THERE SOMETHING IN ATOM BUFFER?
JRST [ POP P,B ;NO, RESTORE REGISTERS
POP P,A
JRST COMERR] ;PRINT ERROR
POP P,B ;REMOVE UNWANTED ELEMENT
MOVE B,A ;SAVE ADDRESS OF SUBJOB NAME
POP P,A ;RETRIEVE SAVED REGISTER
JRST COM3 ;CONTINUE PARSE
COMERR: TRYLOG ;TRY TO LOG COMMAND
WRNMES (<? Unrecognized PTYCON command - >) ;COMMAND ERROR
PUSHJ P,TYPERR ;TYPE REST OF ERROR MESSAGE
MOVEI A,.PRIIN ;CLEAR TYPEAHEAD
CFIBF
JRST COMLVL ;AND RETURN TO COMMAND LEVEL
; CONTROL-C INTERRUPT HANDLER
COMCC: HRROI A,[ASCIZ "^C"] ;PRINT OUT CONTROL-C
PSOUT ;PRINT WITHOUT LOGGING
ERJMP .+1 ;IGNORE ERROR
MOVE A,CMDSBK+.CMBFP ;GET POINTER TO START OF COMMAND
ILDB B,A ;GET FIRST CHARACTER
SKIPN B ;IS IT NULL?
JRST COMC1 ;YES, ILLEGAL CONTROL-C
MOVE A,CMDSBK+.CMPTR ;GET BYTE POINTER TO UNPARSED TEXT
HRROI B,STRING ;DESTINATION
MOVEI C,MAXSTC ;NUMBER OF CHARACTERS TO READ
SETZ D, ;STOP AT NULL BYTE
SIN ;READ IN COMMAND ENTERED SO FAR
PUSH P,A ;SAVE PREVIOUS POINTERS
PUSH P,B
PUSH P,C
MOVE A,CMDSBK+.CMBFP ;GET BYTE POINTER TO START OF COMMAND
HRROI B,STRING ;DESTINATION
MOVEI C,MAXSTC ;NUMBER OF CHARACTERS TO READ IN
MOVEI D,"-" ;STOP AT THE HYPHEN
SIN
LDB C,B ;GET LAST CHARACTER
CAIE C,"-" ;IS IT A HYPHEN?
JRST COMC1 ;NO, ERROR
MOVEM A,LNEPTR ;SAVE START OF TEXT POINTER
SETZ C, ;WIPE OUT HYPHEN
DPB C,B
MOVE C,STRING ;GET ARGUMENT ENTERED
MOVEM C,ARGS ;SAVE IT
MOVEI C,NBLK ;GET ADDRESS OF NUMBER FUNCTION BLOCK
MOVEM C,ARGS+2 ;SAVE AS BLOCK USED
POP P,C ;RESTORE PREVIOUS POINTERS
POP P,B
POP P,A
COMC0: MOVEI B,3 ;CODE FOR CONTROL-C
DPB B,A ;PLACE CONTROL-C IN BUFFER
MOVEM A,CMDSBK+.CMPTR ;STORE AS POINTER TO NEXT PARSE
SETZM CMDSBK+.CMINC ;NO UNPARSED CHARACTERS
MOVEI D,MAXSTC ;COMPUTE NUMBER OF CHARACTERS ENTERED
SUB D,C
MOVE C,CMDSBK+.CMCNT ;DECREMENT SPACE LEFT
SUB C,D
MOVEM C,CMDSBK+.CMCNT
MOVEI A,SINGL0 ;ASSUME PARSING ONE LINER ALREADY
MOVE B,1(P) ;GET FUNCTION BLOCK ADDRESS
CAIE B,SBLK ;WERE WE ALREADY PARSING THE LINE TEXT?
MOVEI A,SINCC ;ADDRESS TO CONTINUE AT AFTER INTERRUPT
MOVEM A,RETSAV ;
DEBRK ;DISMISS INTERRUPT
COMC1: SKIPE A,LOGJFN ;LOGGING THIS?
JRST [ HRROI B,[ASCIZ "^C"] ;STRING TO WRITE
SETZM C ;WRITE IT ALL
SOUT ;WRITE TO LOG FILE
ERJMP .+1 ;IGNORE ERROR
JRST .+1] ;CONTINUE
PUSHJ P,CHKLOG ;SEE IF ANY JOBS LOGGED IN
JRST [ERRMES (<? Type "EXIT" to exit from PTYCON>)
JRST COMC2] ;NO ACTIVE SUBJOBS
ERRMES (<? Subjobs active, use "PUSH" command>)
COMC2: SKIPE A,RDJFN ;IS THIS AN ABORT OUT OF A GET COMMAND?
CLOSF ;YES, CLOSE THE GET FILE
JRST [ MOVE A,RDJFN ;ERROR, TRY TO RELEASE JFN
RLJFN
ERJMP .+1 ;IGNORE ERROR
JRST .+1]
SETZM RDJFN ;STOP READING FROM FILE
SETZM SILNCF ;CLEAR SILENCE FLAG
MOVE A,[.PRIIN,,.PRIOU] ;RESET TTY AS
MOVEM A,CMDSBK+.CMIOJ ;PRIMARY INPUT AND OUTPUT JFNS
MOVEI A,COMLVL ;RESTART FRESH AFTER DISMISS
MOVEM A,RETSAV
;**;[31] Add 1 line after COMC2:+11 DML 31-Mar-86
MOVE P,[IOWD PDLEN,PDL] ;[31] SET UP A FRESH PUSH DOWN LIST
DEBRK ;DISMISS INTERRUPT
CHKLOG: MOVE E,PTYHGH ;GET HIGHEST PTY JOB
SETZ I, ;START AT NUMBER 0
CHKLG1: SKIPN PTYJFN(I) ;IS THERE A JOB ON THIS LINE?
JRST CHKLG2 ;NO, CHECK OTHER SUBJOBS
HRRZ A,PTYTTD(I) ;GET TTY DESIGNATOR
MOVE B,[-1,,D] ;GET LOGGED-IN DIR NUMBER
MOVEI C,.JIUNO
SETZ D, ;START WITH 0 DIR NUM
GETJI
SETZ D, ;ASSUME 0 IF FAILURE
JUMPN D,CPOPJ1 ;JOB IS LOGGED IN
CHKLG2: ADDI I,PTYLEN ;GO TO NEXT JOB
SOJGE E,CHKLG1 ;LOOP BACK FOR ALL SUBJOBS
POPJ P, ;NO ACTIVE JOBS
; TTY TYPE IN INTERRUPT HANDLER
TYPIN: SKIPE RDJFN ;READING FROM FILE?
DEBRK ;YES, DISMISS INTERRUPT
SKIPL TOFLAG ;TYPOUT IN PROGRESS?
SETZM NOINT ;TYPE IN OCCURRED - DISALLOW PTY INTERRUPTS
;**;[32] Add 4 lines at TYPIN+4 GAS 14-Apr-87
SKIPN WAITF ;[32] Inside the wait?
DEBRK ;[32] No, dismiss interrupt
MOVX A,PC%USR ;[32] We were waiting and "A" is free
IORM A,RETSAV ;[32] Return getting out of the WAIT JSYS
DEBRK ;DISMISS INTERRUPT
SINGLE: MOVE A,CMDSBK ;PARSE AFTER FIELD IS TERMINATED
TXO A,CM%WKF
MOVEM A,CMDSBK
MOVEI A,CMDSBK ;GET COMMAND STATE BLOCK
MOVEI B,[FLDDB. .CMTOK,CM%HPP,<-1,,[ASCIZ "-"]>,<a dash>]
;FUNCTION BLOCK
COMND ;PARSE DASH
ERJMP FJERR ;FATAL JSYS ERROR
TXNE A,CM%NOP ;DASH PARSED CORRECTLY?
JRST COMERR ;NO, ERROR
MOVE A,CMDSBK+.CMPTR ;GET POINTER TO NEXT INPUT
MOVEM A,LNEPTR ;SAVE IT
SINCC: MOVE A,CMDSBK ;DON'T PARSE AFTER EVERY FIELD
TXZ A,CM%WKF
MOVEM A,CMDSBK
MOVEI A,.FHSLF ;SET PROCESS TO SELF
MOVE B,[1B<CTLCHN>] ;CHANNEL TO ASSIGN CONTROL-C TO
AIC ;ASSIGN CONTROL-C
SINGL0: MOVEI A,CMDSBK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI B,SBLK ;FUNCTION BLOCK
COMND ;PARSE SINGLE LINE COMMAND TEXT
ERJMP FJERR ;FATAL JSYS ERROR
TXNE A,CM%NOP ;PARSE ERROR?
JRST COMERR ;YES, REPORT IT
CONFIRM ;CONFIRM COMMAND
SETZM LNESTR ;CLEAR STRING
MOVE A,LNEPTR ;GET POINTER TO LINE TEXT
HRROI B,LNESTR ;PLACE IN LINE STRING
SETZ C, ;STOP AT ZERO
SIN ;GET STRING
ERJMP .+1 ;IGNORE ERROR
MOVEI A,0 ;END WITH NULL
DPB A,B ;MASK OFF LF - LEAVE ONLY CR
MOVE A,ARGS+2 ;GET ADDRESS OF FUNCTION BLOCK USED
CAIN A,NBLK ;WAS A NUMBER ENTERED?
JRST [ MOVE A,ARGS ;YES, GET NUMBER ENTERED
JRST SINGL1] ;CONTINUE
HLRZ B,@ARGS+1 ;GET ADDRESS OF SUBJOB NAME
MOVE A,@B ;GET SUBJOB NAME
SINGL1: MOVEM A,ATMBUF ;PLACE IN ATOM BUFFER
SETZM NUMFL ;CLEAR NUMBER FLAG
;**;[33] At SINGL1+2 add 1 line GAS 9-Aug-87
SETOM TOFLAG ;[33] Make sure that we get to COMLVL
PUSHJ P,FNDPTY ;SET UP INDEX OF SUBJOB
JRST SINGL2 ;NOT DEFINED, CHECK "ALL"
SKIPE NUMFL ;WAS A NUMBER ENTERED?
JRST [ IDIVI B,PTYLEN ;GET NUMBER
CAML B,PTYHGH ;WAS IT A NEW HIGH?
PUSHJ P,NEWHGH ;YES, SET IT
JRST .+1] ;CONTINUE
MOVEM I,LSTCON ;SAVE LAST SINGLE SUBJOB #
PUSHJ P,SNGOUT ;SEND IT OUT TO DESIRED SUBJOB
;**;[33] At SINGL1+11. replace 1 line GAS 9-Aug-87
JRST CHKPTY ;[33] Finish up by dumping PTY output now
SNGOUT: PUSHJ P,PTYFIL ;FIRST MAKE SURE OUTPUT BUFFER IS EMPTY
PUSH P,P1 ;SAVE PRESERVED AC
MOVE P1,[POINT 7,LNESTR];POINT TO TEXT
SINLOP: ILDB A,P1 ;GET NEXT CHARACTER TO GO OUT
JUMPE A,SINLPD ;IF ZERO, THEN DONE
PUSHJ P,PTYOUT ;SEND IT OUT
JRST SINLOP ;LOOP FOR ALL CHARACTERS
SINLPD: POP P,P1 ;RESTORE PRESERVED AC
POPJ P, ;AND RETURN
SINGL2: MOVE A,STRING ;GET STRING
AND A,ALLMSK ;MASK OFF GARBAGE
CAME A,[ASCIZ/ALL/] ;IS IT SPECIAL CASE "ALL"?
JRST ILLSJB ;NO, ILLEGAL SUBJOB DESIGNATOR
PUSH P,P1 ;SAVE PRESERVED AC
MOVE P1,PTYHGH ;SET UP TO LOOP FOR ALL PTY'S
SETZ I, ;INITIALIZE INDEX
SNGALL: SKIPE PTYJFN(I) ;IS THERE A PTY INITIALIZED HERE?
PUSHJ P,SNGOUT ;YES, SEND OUT LINE
ADDI I,PTYLEN ;GO TO NEXT PTY
SOJGE P1,SNGALL ;LOOP FOR ALL LINES
POP P,P1 ;RESTORE PRESERVED AC
;**;[33] At SNGALL+5 replace 1 line GAS 9-Aug-87
JRST CHKPTY ;[33] Check PTY output now please
;COMMAND TABLE - MUST BE IN ALPHABETICAL ORDER
DEFINE COMAND<
CMND(<ACCEPT (OUTPUT FROM SUBJOBS) >,RECPTY,1)
CMND(<BELL (WHEN OUTPUT WAITING) >,BELL,1)
CMND(<CONNECT (TO SUBJOB) >,CONPTY,0)
CMND(<DEFINE (SUBJOB #) >,DEFPTY,0)
CMND(<DISCARD (OUTPUT FROM SUBJOB) >,IGNOR,1)
CMND(<EXIT (FROM PTYCON) >,EXIT,0)
CMND(<GET (COMMANDS FROM FILE) >,READ,0)
CMND(<HELP (MESSAGE) >,HELP,0)
CMND(<KILL (SUBJOB) >,KILL,0)
CMND(<LOG (OUTPUT TO FILE) >,LOG,1)
CMND(<PUSH (EXEC LEVEL) >,PUSHE,0)
CMND(<REDEFINE (PTYCON ESCAPE CHARACTER TO BE) >,CHANGE,0)
CMND(<REFUSE (OUTPUT FROM SUBJOBS) >,REFPTY,1)
CMND(<SAVE (INPUT IN FILE) >,SAVINP,1)
CMND(<SILENCE (ALL OUTPUT TO TERMINAL) >,SILNCE,1)
CMND(<WHAT (IS STATE OF SUBJOB) >,WHATPT,0)
>
DEFINE CMND(A,B,C)<
XWD [ASCIZ/A/],B>
COMTAB: XWD COMTBL-1,COMTBL
COMAND
COMTBL==.-COMTAB
CMDTBL: CTBL,,CTBL ;COMMAND TABLE
CMND(<ACCEPT>,RECPTY) ;ACCEPT
CMND(<BELL>,BELL) ;BELL
CMND(<CONNECT>,CONPTY) ;CONNECT
CMND(<DEFINE>,DEFPTY) ;DEFINE
CMND(<DISCARD>,IGNOR) ;DISCARD
CMND(<EXIT>,EXIT) ;EXIT
CMND(<GET>,READ) ;GET
CMND(<HELP>,HELP) ;HELP
CMND(<KILL>,KILL) ;KILL
CMND(<LOG>,LOG) ;LOG
CMND(<NO>,NOCOMM) ;NO
CMND(<PUSH>,PUSHE) ;PUSH
CMND(<REDEFINE>,CHANGE) ;REDEFINE
CMND(<REFUSE>,REFPTY) ;REFUSE
CMND(<SAVE>,SAVINP) ;SAVE
CMND(<SILENCE>,SILNCE) ;SILENCE
CMND(<WHAT>,WHATPT) ;WHAT
CTBL==.-CMDTBL-1 ;COMMAND TABLE LENGTH
NOTBL: NTBL,,NTBL ;NO COMMAND TABLE
CMND(<ACCEPT>,RECPTY) ;ACCEPT
CMND(<BELL>,BELL) ;BELL
CMND(<DISCARD>,IGNOR) ;DISCARD
CMND(<LOG>,LOG) ;LOG
CMND(<REFUSE>,REFPTY) ;REFUSE
CMND(<SAVE>,SAVINP) ;SAVE
CMND(<SILENCE>,SILNCE) ;SILENCE
NTBL==.-NOTBL-1 ;LENGTH OF NO COMMAND TABLE
DEFINE CMND(A,B,C)<
EXP C>
COMFLG: COMAND
HELP: NOISE (MESSAGE) ;PARSE NOISE WORD
CONFIRM ;CONFIRM COMMAND
CALL ASCTER ;INSURE ASCII TERMINAL
HRROI A,[ASCIZ/
THE DEFINED COMMANDS ARE:
/]
PUSHJ P,TTSOUT ;TYPE OUT HEADER
MOVSI C,1-COMTBL ;GET # OF ELEMENTS IN TABLE
HELPLP: HLRO A,COMTAB+1(C) ;GET POINTER TO COMMAND
PUSHJ P,TTSOUT ;TYPE IT OUT WITH ITS NOISE WORDS
PUSHJ P,HLPSTR ;PUT A "*" AFTER STRING IF NEEDED
PUSHJ P,CRLF ;END WITH A CRLF
AOBJN C,HELPLP ;LOOP FOR ALL COMMANDS
HRROI A,[ASCIZ/
"*" MEANS THE COMMAND CAN BE PRECEDED BY "NO" TO REVERSE ITS MEANING
THE ESCAPE CHARACTER TO RETURN TO COMMAND LEVEL IS: /]
PUSHJ P,TTSOUT
MOVE A,TRPCHR ;GET ESCAPE CHARACTER
PUSHJ P,TTBOUT ;TYPE IT OUT
PUSHJ P,CRLF ;END LINE
JRST COMLVL ;DONE
HLPSTR: SKIPN COMFLG(C) ;IS THIS A COMMAND THAT TAKES "NO"?
POPJ P, ;NO
HRROI A,[ASCIZ/ */] ;YES, TYPE IT OUT
PUSHJ P,TTSOUT
POPJ P,
;ROUTINE TO GET A CHARACTER FROM TTY - USED ONLY WHEN CONNECTED
TTYGET: SKIPE RDJFN ;READING FROM A FILE
JRST FILGET ;YES, GET CHARACTER FROM FILE INSTEAD
MOVE A,TERJFN ;SEE IF ANY CHARACTERS HAVE BEEN TYPED.
SIBE
JRST [ SETO B,
JRST TTGETR] ;YES
PUSH P,[TTGETR] ;SET UP TO ALLOW INTERRUPTS TO TAKE
SETOB B,IOWATF ;MARK THAT INTERRUPTS CAN TAKE
MOVE A,TERJFN ;PRIMARY INPUT OR BINARY CHANNEL
SKIPN WAKEF ;INTERRUPT PENDING ??
BIN ;NO, WAIT FOR ONE.
SETZM IOWATF ;CLEAR OK TO INTERRUPT FLAG.
MOVE A,B ;MOVE CHARACTER INTO A
ANDI A,177 ;TRUNCATE TO 7 BITS
POPJ P, ;GO TO TTGETR
TTGETR: SETZM WAKEF ;CLEAR WAKE UP FLAG
JUMPL B,TTGET7 ;JUMP IF NO CHARACTER HAS BEEN INPUT.
JRST CPOPJ1 ;EXIT.
TTGET7: MOVE A,TERJFN ;GET CHARACTER IF THERE IS ONE.
SIBE ;ANY CHARACTERS TYPED IN?
CAIA ;THERE ARE SOME.
POPJ P, ;NO, GIVE NO SKIP RETURN
MOVE A,TERJFN
BIN ;READ IN WAITING CHARACTER
ERJMP CPOPJ ;IF ERROR, RETURN FAILURE
MOVE A,B
ANDI A,177 ;TRUNCATE TO 7 BITS
JRST CPOPJ1
FILGET: HRRZ A,RDJFN ;GET JFN OF FILE BEING READ
BIN ;GET THE NEXT CHARACTER
CAIN B,"^" ;UPARROW?
PUSHJ P,[BIN ;YES, GET NEXT CHARACTER
CAIN B,"^" ;ANOTHER UPARROW?
POPJ P, ;YES, RETURN
CAIN B,"$" ;DOLLAR SIGN?
JRST [MOVEI B,33
POPJ P,] ;YES, MAKE IT AN ALTMODE
CAIL B,141 ;LOWER CASE?
CAILE B,172
SKIPA ;NO
SUBI B,40 ;YES, MAKE IT UPPER CASE
TRZ B,100 ;MAKE IT A CONTROL
POPJ P,]
CAIN B,.CHCRT ;CR?
JRST [ BIN ;YES, PEEK AT NEXT ONE
CAIN B,.CHLFD ;AN LF?
SKIPA B,TERJFN ;YES, RETURN CR IF BINARY, LF IF ASCII
BKJFN ;NO, PUT IT BACK AND RETURN CR
CAMN B,BINTTY
SKIPA B,[.CHCRT]
MOVEI B,.CHLFD
JRST .+1]
JUMPN B,[MOVE A,B ;DID WE GET A CHARACTER?
CAME A,TRPCHR ;YES, WAS IT THE ESCAPE CHARACTER
JRST CPOPJ1 ;NO, GIVE SUCCESSFUL RETURN
MOVEI A,"^" ;ECHO THE ESCAPE CHARACTER ON THE TTY
PUSHJ P,TTBOUT
MOVE A,TRPCHR ;GET THE TRAP CHARACTER
TRO A,100 ;MAKE IT INTO THE ASCII COUNTERPART
PUSHJ P,TTBOUT
PUSHJ P,CRLF ;END LINE
JRST COMLVL] ;AND RETURN TO COMMAND LEVEL
GTSTS ;SEE IF EOF
TLNN B,(1B8) ;...
JRST FILGET ;NO, IGNORE NULLS
MOVEM I,CURENT ;SAVE SUBJOB CONNECTED TO
JRST GEOF ;YES, CLOSE FILE AND STOP GET
;ROUTINES TO TURN ON AND OFF PI SYSTEM
PIOFF: MOVEI A,400000
DIR ;DISABLE INTERRUPTS
AOS PICNT ;COUNT # OF TIMES DONE
POPJ P, ;AND RETURN
PION: SOSL PICNT ;NESTED?
POPJ P, ;YES, DON'T ENABLE
SETOM PICNT ;NO, OK TO TURN BACK ON
MOVEI A,400000
EIR ;TURN ON PI SYSTEM
POPJ P, ;AND RETURN
TRAP: CALL ASCTER ;GET ASCII TERMINAL SET UP
MOVEI A,"^" ;ECHO THE ESCAPE CHARACTER ON THE TTY
PUSHJ P,TTBOUT
MOVE A,TRPCHR ;GET THE TRAP CHARACTER
TRO A,100 ;MAKE IT INTO THE ASCII COUNTERPART
PUSHJ P,TTBOUT
PUSHJ P,CRLF ;TYPE CRLF FIRST
TRAP1: SKIPE A,RDJFN ;IS THIS AN ABORT OUT OF A GET COMMAND?
CLOSF ;YES, CLOSE THE GET FILE
JRST [ MOVE A,RDJFN ;ERROR, TRY TO RELEASE JFN
RLJFN
ERJMP .+1
JRST .+1]
SETZM RDJFN ;STOP READING FROM FILE
SETZM SILNCF ;CLEAR SILENCE FLAG
MOVE A,[.PRIIN,,.PRIOU] ;RESET TTY AS
MOVEM A,CMDSBK+.CMIOJ ;PRIMARY INPUT AND OUTPUT JFNS
SETZM IOWATF ;CLEAR OK TO INTERRUPT FLAG
MOVEI A,.PRIIN ;CLEAR TYPE AHEAD
CFIBF ; OF UNREAD JUNK
;**;[32] Replace 1 line with 2 at PANIC-3 GAS 14-Apr-87
SETZM NOINT ;[32] OK for pty output interrupts now
MOVEI A,COMLVL ;[32] Return to get another command
MOVEM A,RETSAV ; AFTER DEBRK
DEBRK
PANIC: CALL ASCTER ;GET ASCII TERMINAL SET UP
BUG(CHK,<panic level interrupt occurred>)
HRROI A,ERRSTR ;PUT MESSAGE INTO A STRING
HRLOI B,400000 ;AND REASON FOR PANIC
MOVEI C,0
ERSTR
JFCL
SKIPA A,[POINT 7,[ASCIZ/unknown error code/]]
HRROI A,ERRSTR ;NOW OUTPUT THE MESSAGE
PUSHJ P,TTSOUT
MOVEI A,.PRIOU
DOBE ;WAIT FOR IT TO GO OUT
JRST TRAP1 ; AND GO TO COMMAND LEVEL
;SET UP ASCII TERMINAL
ASCTER: MOVEI A,.PRIOU ;THE I.D. OF IT
MOVEM A,TERJFN ;SET IT
RET ;AND DONE
EXIT: NOISE (FROM PTYCON) ;PARSE NOISE
CONFIRM ;CONFIRM COMMAND
PUSHJ P,LOGCLS ;CLOSE THE LOG FILE IF ANY
PUSHJ P,CHKLOG ;SEE IF ANY ACTIVE SUBJOBS
JRST EXIT1 ;NONE, GO EXIT
HRROI A,[ASCIZ/Caution: Exiting may log out the still active subjobs!
Confirm: (type CONTROL-/]
PUSHJ P,TTSOUT
MOVE A,TRPCHR ;TYPE OUT THE ESCAPE CHAR
TRO A,100
PUSHJ P,TTBOUT
HRROI A,[ASCIZ/ to get back to PTYCON) /]
PUSHJ P,TTSOUT ;ISSUE WARNING
MOVEI A,CMDSBK ;COMMAND STATE BLOCK
MOVEI B,[FLDDB. .CMCFM] ;FUNCTION BLOCK
COMND ;PARSE CONFIRMATION
ERJMP FJERR ;FATAL JSYS ERROR
TXNE A,CM%NOP ;ERROR DURING CONFIRM PARSE?
JRST COMERR ;YES, OUTPUT ERROR MESSAGE
EXIT1: CALL RSTTY ;RESET TTY PARAMETERS
SKIPE A, LOGJFN ;GET LOGJFN
CLOSF ;CLOSE IT
JFCL ;IGNORE ERROR
SKIPE A,SVIJFN ;GET SAVED INPUT JFN
CLOSF ;CLOSE IT
JFCL ;IGNORE ERROR
HALTF ;STOP
CALL RSTTY ;RESET TTY IF CONTINUED
SKIPN LOGJFN ;WAS THERE A LOG FILE
JRST COMLVL ;NO, CONTINUE
HRROI B,LOGBUF ;GET NAME OF LAST LOG FILE
MOVX A,GJ%SHT ;SETUP FLAG BIT
GTJFN ;GET JFN
ERJMP RDGTJF ;ERROR, OUTPUT MESSAGE
JRST LOG3 ;OPEN IT
RSTTY: MOVEI A,.PRIIN ;GET PRIMARY INPUT
RFMOD ;GET STATE NOW
EXCH B,SAVMOD ;SAVE STATE NOW, GET OLD STATE
SFMOD ;RESET OLD STATE
STPAR ;...
RET
CHKLM: SKIPLE LMFLAG ;AT LEFT MARGIN?
POPJ P, ;NO
MOVEI A,.PRIOU
RFPOS ;SEE IF AT LEFT MARGIN
TRNN B,-1
JRST CPOPJ1 ;YES, SKIP RETURN
POPJ P, ;NO, GIVE NON-SKIP RETURN
CRLF: HRROI A,[ASCIZ/
/]
PUSHJ P,TTSOUT ;TYPE OUT CR-LF
SETOM LMFLAG ;RESET FLAG TO -1
POPJ P,
TTBOUT: EXCH A,LSTCHR ;GET LAST CHAR TYPED
CAIE A,15 ;CR?
SKIPA ;NO
CAME A,LSTCHR ;YES, IS THIS CHAR A CR ALSO?
SKIPA A,LSTCHR ;NO, THEN TYPE IT
POPJ P, ;YES, DONT TYPE TWO IN A ROW
CAILE A,37 ;DON'T INCREMENT COLUMN COUNTER FOR NON-PRINTING CHARACTERS.
AOS LMFLAG
CAIE A,12
CAIN A,15
SETZM LMFLAG ;RESET COUNTER FOR CARRIAGE RETURN.
SKIPE RDJFN ;READING FROM A FILE?
SKIPN SILNCF ;AND RIGGED FOR SILENT RUNNING?
SKIPE IGNORF ;NO, IGNORING THIS PTY?
JRST TTBLG0 ;YES
PUSH P,B ;DON'T CLOBBER B.
MOVE B,A ;PUT CHARACTER IN B.
MOVE A,TERJFN ;GET APPROPRIATE TTY CHANNEL (BINARY OR REGULAR)
BOUT ;TYPE THE CHARACTER.
MOVE A,B ;RESTORE A AS THE CHARACTER.
POP P,B ;AND WHATEVER WAS IN B.
CAIE A,7 ;BELL?
SETOM TOFLAG ;NO, SET TYPE OUT OCCURRED FLAG
JRST TTBLG0
TTBLOG: JUMPE A,CPOPJ ;DON'T LOG NULLS.
EXCH A,LSTCHR ;GET LAST CHAR TYPED
CAIE A,15 ;CR?
SKIPA ;NO
CAME A,LSTCHR ;YES, IS THIS CHAR A CR ALSO?
SKIPA A,LSTCHR ;NO, THEN TYPE IT
POPJ P, ;YES, DONT TYPE TWO IN A ROW
TTBLG0: SKIPN LOGJFN ;LOGGING THIS?
POPJ P, ;NO, RETURN
PUSH P,B ;SAVE ALL ACS
MOVE B,A ;GET CHAR
MOVE A,LOGJFN ;GET LOGGING JFN
CAIE B,33 ;DONT SEND ALTMODES TO FILE
BOUT ;SEND OUT CHAR
TTBLG1: MOVE A,B ;RESTORE ACS
POP P,B
POPJ P, ;RETURN
TTSOUT: PUSH P,TERJFN ;SAVE THE TTY CHANNEL.
PUSH P,A ;AND THE STRING POINTER.
MOVEI A,.PRIOU ;GET NON-BINARY CHANNEL FOR PRINTING THE MESSAGE.
MOVEM A,TERJFN ;SET UP THE NON-BINARY CHANNEL.
POP P,A ;RETRIEVE THE POINTER TO THE MESSAGE.
PUSHJ P,TTSOU1 ;PRINT IT.
POP P,TERJFN ;RESTORE THE TTY CHANNEL.
POPJ P,
TTSOU1: TLC A,-1 ;LEFT HALF = -1?
TLCN A,-1
HRLI A,(POINT 7,0) ;YES, SET UP BYTE POINTER
PUSH P,B ;SAVE ACS
MOVE B,A ;GET STRING POINTER OUT OF A
TTSOUL: ILDB A,B ;GET NEXT CHAR OF STRING
JUMPE A,TTSOUD ;IF NULL, THEN DONE
CALL TTBOUT ;TYPE OUT CHAR
JRST TTSOUL ;LOOP TILL NULL FOUND
TTSOUD: MOVE A,B ;RETURN UPDATED STRING POINTER IN A
POP P,B ;RESTORE ACS
POPJ P,
TTSLOG: SKIPN LOGJFN ;LOGGING?
POPJ P, ;NO
PUSH P,B ;DO NOT CLOBBER ACS
PUSH P,C
MOVEI C,0
MOVE B,A ;GET STRING POINTER
MOVE A,LOGJFN ;AND JFN OF LOG FILE
SOUT
MOVE A,B ;CLEAN UP ACS
POP P,C
POP P,B
POPJ P, ;AND RETURN
;ROUTINE TO PARSE A COMMA OR A CARRIAGE RETURN
;CALL COMACR
;RETURN +1 IF COMMA PARSED
; +2 IF CONFIRMATION RECEIVED
COMACR: MOVEI A,CMDSBK ;GET COMMAND STATE BLOCK
MOVEI B,[FLDDB. .CMCMA,<CM%HPP+CM%SDH>,,<comma or confirm with carriage return>] ;FUNCTION DESCRIPTOR BLOCK FOR PARSE
COMND ;PARSE COMMA OR CONFIRM
ERJMP FJERR ;FATAL JSYS ERROR
TXNE A,CM%EOC ;CONFIRMATION RECEIVED?
JRST [ TRYLOG ;YES, TRY TO LOG COMMAND
JRST CPOPJ1] ;SKIP RETURN
TXNE A,CM%NOP ;COMMA RECEIVED?
JRST COMERR ;NO, ERROR
JRST CPOPJ ;COMMA WAS ENTERED
;ROUTINE TO CHANGE THE PTYCON ESCAPE CHARACTER
CHANGE: NOISE (PTYCON ESCAPE CHARACTER TO BE) ;PARSE NOISE
MOVEI B,[FLDBK. .CMFLD,CM%HPP,,<a single control character>,,BMSK]
;FUNCTION BLOCK
COMND ;PARSE FIELD
ERJMP FJERR ;FATAL JSYS ERROR
CONFIRM ;CONFIRM COMMAND
MOVE A,[POINT 7,ATMBUF,6] ;GET POINTER TO ATOM BUFFER
LDB B,A ;LOAD FIRST CHARACTER
SKIPN B ;WAS A CHARACTER ENTERED?
JRST CHNGIL ;NO, ERROR
ILDB C,A ;GET NEXT CHARACTER
SKIPE C ;WAS THERE ONE?
JRST CHNGIL ;YES, ERROR
CAIE B,11 ;DONT ALLOW IT TO BE TAB
CAIL B,34 ;AND IT MUST BE A CONTROL CHARACTER
JRST CHNGIL ;ILLEGAL
CAIE B,"C"-100 ;NOT CONTROL-C
CAIN B,"O"-100 ;NOR CONTROL-O
JRST CHNGIL
CAIE B,33 ;NO ALTMODES
CAIN B,14 ;OR FORM FEEDS
JRST CHNGIL
CAIE B,12 ;LINE FEED
CAIN B,15 ;OR CARRIAGE RETURNS ARE ILLEGAL
JRST CHNGIL
EXCH B,TRPCHR ;GET OLD TRAP CHARACTER
DTI ;DEASSIGN IT
ERJMP .+1
MOVSI A,400000 ;NOW BUILD THE MASK
MOVN B,TRPCHR ;GET SHIFT COUNTER
LSH A,(B) ;GET MASK
MOVEM A,ESCMSK ;SAVE THIS MASK FOR SUBJOB LEVEL
IOR A,[CNTRLO+CNTRLC+TYPINM] ;INCLUDE CONTROL-O, CONTROL-C, INPUT
MOVEM A,TIMASK ;SAVE THE NEW MASK
JRST PTYCON ;GO SET THIS UP
CHNGIL: ERRMES (<? Illegal PTYCON escape character>)
JRST COMLVL
BMSK: 446665,,670760 ;ALLOW ONLY CERTAIN CONTROL
777777,,777760 ;CHARACTERS TO BE ENTERED
777777,,777760 ;FOR
777777,,777760 ;REDEFINE
RECPTY: SKIPE NOFLAG ;USER TYPE NO?
JRST NOREC ;YES, TURN IT INTO REFUSE
NOREF: NOISE (OUTPUT FROM SUBJOBS) ;PARSE NOISE
SETZM ARGCNT ;INITIALIZE ARGUMENT COUNT
RECPT0: PUSHJ P,GETSJB ;GET A SUBJOB NUMBER IN I
JRST ILLSJB ;NO MATCH, COMMAND ERROR
JRST RECPT1 ;USER SAID ALL
PUSHJ P,COMACR ;PARSE COMMA OR CONFIRM
JRST [PUSHJ P,SAVARG ;COMMA, SAVE SUBJOB INDEX
JRST RECPT0] ;GET NEXT SUBJOB
PUSHJ P,SAVARG ;SAVE SUBJOB INDEX
RECPT3: MOVE I,ARGS(D) ;GET SUBJOB INDEX
MOVSI B,PTREFF ;SET UP TO CLEAR REFUSE FLAG
ANDCAM B,PTYSTS(I) ;ALLOW TYPE OUT
SOJL D,COMLVL ;DECREMENT ARGUMENT COUNT
JRST RECPT3 ;CONTINUE FOR NEXT ARGUMENT
RECPT1: CONFIRM ;CONFIRM COMMAND
MOVE C,PTYHGH ;GET HIGHEST PTY NUMBER
MOVEI I,0 ;START WITH NUMBER 0
MOVSI B,PTREFF ;GET FLAG
RECPT2: ANDCAM B,PTYSTS(I) ;CLEAR REFUSE FLAG
ADDI I,PTYLEN ;STEP TO NEXT PTY
SOJGE C,RECPT2 ;LOOP BACK FOR ALL PTY'S
SETZM REFALL ;MARK THAT A ACCEPT ALL WAS DONE
JRST COMLVL ;ALL THROUGH
SAVARG: MOVE D,ARGCNT ;GET NUMBER OF ARGUMENTS
CAILE D,MAXARG ;IS THERE ROOM FOR ANOTHER ARGUMENT?
JRST TOOARG ;NO, TOO MANY ARGUMENTS
MOVEM I,ARGS(D) ;SAVE INDEX VALUE
AOS ARGCNT ;INCREMENT ARGUMENT COUNT
RET ;RETURN
REFPTY: SKIPE NOFLAG ;DID USER TYPE NO?
JRST NOREF ;YES, TURN IT INTO AN ACCEPT
NOREC: NOISE (OUTPUT FROM SUBJOBS) ;PARSE NOISE WORDS
SETZM ARGCNT ;INITIALIZE ARGUMENT COUNT
REFPT0: PUSHJ P,GETSJB ;GET SUBJOB NUMBER
JRST ILLSJB ;NO MATCH, COMMAND ERROR
JRST REFPT1 ;USER SAID "ALL"
PUSHJ P,COMACR ;PARSE COMMA OR CONFIRM
JRST [PUSHJ P,SAVARG ;COMMA, SAVE SUBJOB INDEX
JRST REFPT0] ;GET NEXT SUBJOB
PUSHJ P,SAVARG ;SAVE SUBJOB INDEX
REFPT3: MOVE I,ARGS(D) ;GET SUBJOB INDEX
MOVSI B,PTREFF ;GET REFUSE FLAG
IORM B,PTYSTS(I) ;SET REFUSE FLAG
SOJL D,COMLVL ;DECREMENT ARGUMENT COUNT
JRST REFPT3 ;CONTINUE FOR NEXT ARGUMENT
REFPT1: CONFIRM ;CONFIRM COMMAND
MOVE C,PTYHGH ;GET NUMBER OF PTYS OPEN
MOVEI I,0 ;START AT # 0
MOVSI B,PTREFF ;PREPARE TO SET FLAG
REFPT2: IORM B,PTYSTS(I) ;SET REFUSE FLAG
ADDI I,PTYLEN ;STEP TO NEXT PTY
SOJGE C,REFPT2 ;LOOP FOR ALL
SETOM REFALL ;REMEMBER REFUSE ALL COMMAND
JRST COMLVL ;ALL THROUGH
;ROUTINE TO DEFINE A PTY SUBJOB NAME
DEFPTY: NOISE (SUBJOB #) ;PARSE NOISE
SETOM ARGS ;INITIALIZE FIRST ARGUMENT
SETOM ARGS+1 ;INITIALIZE SECOND ARGUMENT
MOVEI B,[FLDDB. .CMNUM,<CM%HPP+CM%SDH>,^D10,<subjob number>,0]
;FUNCTION DESCRIPTOR BLOCK
MOVNI I,PTYLEN ;FIND FIRST FREE SUBJOB NUMBER
MOVE C,NUMPTY ;LOOP FOR ALL PTY'S
DEFPT1: ADDI I,PTYLEN ;GO TO NEXT SUBJOB
SKIPE PTYJFN(I) ;INITIALIZED?
SOJG C,DEFPT1 ;YES, TRY NEXT ONE
JUMPLE C,[MOVE C,.CMFNP(B) ;DIDN'T FIND A FREE ONE
TXZ C,CM%DPP ;DISALLOW DEFAULT
JRST DEFPT2] ;CONTINUE
PUSH P,B ;SAVE POINTER TO FUNCTION BLOCK
HRROI A,STRING ;DESTINATION STRING
MOVEI B,(I) ;GET SUBJOB INDEX
IDIVI B,PTYLEN ;CONVERT TO SUBJOB NUMBER
MOVEI C,^D10 ;OUTPUT IN DECIMAL
NOUT ;OUTPUT NUMBER INTO STRING
ERJMP .+1 ;IGNORE ERROR
POP P,B ;RESTORE POINTER TO FUNCTION BLOCK
HRROI A,STRING ;RECONSTRUCT POINTER
MOVEM A,.CMDEF(B) ;STORE AS DEFAULT
MOVE C,.CMFNP(B) ;GET FLAG
TXO C,CM%DPP ;ALLOW DEFAULT
DEFPT2: MOVEM C,.CMFNP(B) ;REPLACE FLAGS
MOVEI A,CMDSBK ;RESTORE COMMAND STATE BLOCK ADDRESS
COMND ;GET NUMBER
ERJMP FJERR ;FATAL JSYS ERROR
TXNE A,CM%NOP ;ERROR IN PARSING NUMBER?
JRST COMERR ;YES
SKIPL B ;WITHIN BOUNDS?
CAML B,NUMPTY
JRST ILLSJB ;NO, OUTPUT ERROR
MOVE C,CMDSBK+.CMPTR ;GET POINTER TO UNPARSED CHARACTERS
ILDB D,C ;GET NEXT CHARACTER
CAIE D," " ;IS IT A SPACE?
CAIN D,15 ;OR A CR
JRST DEFPT4 ;YES, CONTINUE
JRST ILLSJB ;OUTPUT ILLEGAL SUBJOB ERROR
DEFPT4: MOVEM B,ARGS ;SAVE NUMBER
PUSH P,P1 ;SAVE FLAG REGISTER
SETZ P1, ;INITIALIZE IT FOR NO MESSAGE
NOISE (AS) ;PARSE NOISE
MOVEI B,[FLDDB. .CMFLD,CM%HPP,,<subjob name>] ;FUNCTION BLOCK
COMND ;GET SUBJOB NAME
ERJMP FJERR ;FATAL JSYS ERROR
TXNE A,CM%EOC ;DID USER END COMMAND?
SETZM ARGS+1 ;YES, SET ARGUMENT
CONFIRM ;CONFIRM COMMAND
SKIPL ARGS+1 ;WAS A NAME ENTERED?
JRST DEFPT3 ;NO, CONTINUE ELSEWHERE
SETZM NUMFL ;CLEAR NUMBER ENTERED FLAG
PUSHJ P,FNDPTY ;GO SEE IF NAME ALREADY EXISTS?
JRST DEFPT7 ;NO NAME IN USE
SKIPE NUMFL ;WAS A NUMBER ENTERED?
JRST DEFPT7 ;YES, DO NOT CLEAR NAME
SETZM PTYNAM(I) ;YES, CLEAR NAME
SETO P1, ;MAKE MESSAGE COME OUT
DEFPT7: MOVE B,STRING ;GET SUBJOB NAME
MOVEM B,ARGS+1 ;PLACE AS ARGUMENT
DEFPT3: MOVE B,ARGS ;RETRIEVE NUMBER
IMULI B,PTYLEN ;CALCULATE INDEX
MOVE I,B ;SET UP INDEX
SKIPN PTYJFN(I) ;IS PTY OPENED YET?
PUSHJ P,PTINIT ;NO, GO INITIALIZE IT
MOVE B,ARGS ;GET NUMBER
CAML B,PTYHGH ;IS THIS A NEW HIGH?
PUSHJ P,NEWHGH ;YES, SET UP NEW HIGH NUMBER
MOVE B,ARGS+1 ;GET FIVE CHARACTER NAME
PUSHJ P,DELNAM ;DELETE OLD NAME FROM TABLE
MOVEM B,PTYNAM(I) ;STORE NAME EVEN IF NULL
MOVEM I,LSTCON ;DEFINE IS SAME AS CONNECT
SKIPE B ;NON NULL NAME ENTERED?
PUSHJ P,ADDNAM ;YES, ADD NEW ONE
SKIPE P1 ;WAS NAME ALREADY IN USE?
WRNMES (<% Name already in use, reassigned to this subjob
>) ;PRINT WARNING MESSAGE
POP P,P1 ;RESTORE PERMANENT AC
JRST COMLVL ;AND RETURN
ADDNAM: MOVE A,PTYNAM(I) ;GET PTY NAME
AND A,ALLMSK ;STRIP OFF ANY GARBAGE
CAMN A,[ASCIZ "ALL"] ;WAS NAME ALL?
RET ;YES, DON'T ADD
MOVEI A,NAMTBL ;ADDRESS OF NAME TABLE
HRLZI B,PTYNAM(I) ;TABLE ENTRY TO BE ADDED
TBADD ;ADD SUBJOB NAME TO NAME TABLE
ERJMP .+1 ;IGNORE ERROR
RET ;RETURN
TYPNUM: MOVEI B,(I) ;TYPE SUBJOB NUMBER FROM INDEX
IDIVI B,PTYLEN ;GET SUBJOB NUMBER
HRROI A,STRING ;PUT NUMBER IN STRING
MOVEI C,12 ;DECIMAL
NOUT ;TYPE OUT NUMBER
JFCL
HRROI A,STRING ;NOW TYPE IT
PUSHJ P,TTSOUT
POPJ P, ;AND RETURN
TOOFEW: ERRMES (<? Too few arguments>)
JRST COMLVL
TOOARG: TRYLOG ;TRY TO LOG COMMAND
ERRMES (<? Too many arguments>) ;TOO MANY ARGUMENTS
JRST COMLVL
;ROUTINE TO CONNECT TO A PTY LINE
CONPTY: NOISE (TO SUBJOB) ;PARSE NOISE
SKIPGE I,LSTCON ;GET LAST CONNECTED SUBJOB IF ANY
JRST [SETOM NODEF ;IF NONE, ALLOW NO DEFAULTS
SETZM CONDEF ;CLEAR DEFAULT STRING FOR CONNECT
JRST CONPT3] ;CONTINUE
SKIPE A,PTYNAM(I) ;IS THERE A NAME DEFINED FOR IT?
JRST [MOVEM A,CONDEF ;STORE ADDRESS AS DEFAULT
JRST CONPT3] ;CONTINUE
MOVEI B,(I) ;GET SUBJOB NUMBER FROM INDEX
IDIVI B,PTYLEN ;GET SUBJOB NUMBER
HRROI A,CONDEF ;STORE IN DEFAULT ADDRESS
MOVEI C,^D10 ;DECIMAL NUMBER
NOUT ;PLACE NUMBER AS DEFAULT
ERJMP .+1 ;ERROR, CONTINUE ANYWAY
CONPT3: SETZM NUMFL ;CLEAR NUMBER WAS ENTERED FLAG
PUSHJ P,GETSJB ;GET SUBJOB INDEX IN I
JRST ILLSJB ;NO MATCH, COMMAND ERROR
JRST .+1 ;USER DEFAULTED
MOVEM B,ARGS ;SAVE NUMBER IF ENTERED
CONFIRM ;CONFIRM COMMAND
SKIPE NUMFL ;WAS A NUMBER ENTERED?
JRST [ MOVE B,ARGS ;GET SUBJOB INDEX
IDIVI B,PTYLEN ;CONVERT TO SUBJOB NUMBER
CAML B,PTYHGH ;WAS IT A NEW HIGH?
PUSHJ P,NEWHGH ;YES, SET IT
JRST .+1] ;CONTINUE
HRRZS I ;SET UP NEW INDEX
MOVEM I,LSTHDR ;AS NEW LAST CONNECTED TO SUBJOB
MOVEM I,LSTCON ;AND DONT TYPE OUT A HEADER
HRROI A,[ASCIZ/[Connected to subjob /]
PUSHJ P,TTSOUT
PUSHJ P,TYPNAM ;TYPE SUBJOB NAME
HRROI A,[ASCIZ/]
/]
PUSHJ P,TTSOUT
PUSHJ P,PTYFIL ;READ IN ANY CHARACTERS IN BUFFER
PUSHJ P,PTOCHK ;TYPE OUT ANYTHING BUFFERED UP
JRST PTYLOP ;GO CONNECT
ILLSJB: MOVE A,[POINT 7,ATMBUF,6] ;POINT TO FIRST CHARACTER OF ARG
LDB B,A ;GET THE FIRST CHARACTER
SKIPN B ;IS IT ZERO (ARG NOT SPECIFIED)?
JRST TOOFEW ;YES, OUTPUT ERROR MESSAGE
TRYLOG ;TRY TO LOG COMMAND
ERRMES (<? Illegal subjob designator>) ;ILLEGAL SUBJOB DESIG.
JRST COMLVL
;ROUTINE TO SET UP I WITH PTY NUMBER
FNDPTY: SETZM STRING ;CLEAR STRING
HRROI A,ATMBUF ;POINT TO ATOM BUFFER
HRROI B,STRING ;PLACE IN STRING
MOVEI C,5 ;READ ONLY FIVE CHARACTERS
SETZ D, ;STOP AT ZERO
SIN ;GET STRING
ERJMP .+1 ;IGNORE ERROR
SKIPN A,STRING ;NON NULL NAME?
POPJ P, ;NO, CANNOT FIND
MOVE C,PTYHGH ;GET MAX DEFINED PTY
SETZ I, ;START AT 0
FNDPT1: CAMN A,PTYNAM(I) ;A MATCH
JRST CPOPJ1 ;YES, THEN DONE
ADDI I,PTYLEN ;NO, TRY NEXT ONE
SOJGE C,FNDPT1 ;LOOP FOR ALL SUBJOBS
MOVE A,[POINT 7,ATMBUF,6] ;DID NOT FIND ONE, SEE IF THIS IS A #
LDB C,A ;FIRST, CHECK FOR A DASH (-)
CAIN C,55 ;WAS ONE INPUT?
JRST CPOPJ ;YES, RETURN BAD
HRROI A,ATMBUF ;NO, TRY TO GET THE NUMBER
MOVEI C,12
NIN ;READ IN NUMBER
POPJ P, ;BAD
LDB C,A ;SEE IF ANY CHARACTERS AFTER NUMBER
JUMPN C,CPOPJ ;IF YES, THEN NOT SPECIFIING A NUMBER
SKIPL B ;LESS THAN LOWER BOUND OF ZERO?
CAML B,NUMPTY ;WITHIN BOUNDS?
POPJ P, ;NO, BAD
IMULI B,PTYLEN ;CALCULATE INDEX
MOVE I,B
SETOM NUMFL ;A NUMBER WAS ENTERED
JRST CPOPJ1 ;SUCCESS
NEWHGH: PUSH P,P1 ;SAVE A FEW ACS
PUSH P,P2
PUSH P,P3
MOVE P1,PTYHGH ;GET CURRENT HIGH
IMULI P1,PTYLEN ;GET INDEX
MOVE P2,B ;GET NEW HIGH
SUB P2,PTYHGH ;GET NUMBER OF JOBS NEEDING INITIALIZING
SETZ P3, ;START WITH 0 FOR STATUS
SKIPE REFALL ;REFUSING ALL?
TLO P3,PTREFF ;YES, SET BIT
SKIPE IGNALL ;IGNORING ALL?
TLO P3,PTIGNF ;YES
NEWHG1: ADDI P1,PTYLEN ;GO TO NEXT AREA
MOVEM P3,PTYSTS(P1) ;STORE INITIAL STATUS WORD
SOJG P2,NEWHG1 ;LOOP FOR ALL JOBS
MOVEM B,PTYHGH ;STORE NEW HIGH VALUE
POP P,P3 ;RESTORE ACS
POP P,P2
POP P,P1
POPJ P, ;AND RETURN
;ROUTINE TO HANDLE END OF FILE WHEN DOING A GET COMMAND
GEOF: HRRZ A,RDJFN ;GET READ JFN
CLOSF ;CLOSE FILE AND RELEASE JFN
ERJMP .+1 ;IGNORE ERROR
SETZM RDJFN ;CLEAR READING FLAG
SETZM SILNCF ;AND CLEAR SILENCE FLAG
MOVE A,[.PRIIN,,.PRIOU] ;RESET TTY
MOVEM A,CMDSBK+.CMIOJ ;AS INPUT AND OUTPUT JFN
SKIPGE CURENT ;AT COMMAND LEVEL?
JRST COMLVL ;YES, GET NEXT COMMAND
JRST TTYGET ;NO, GET CHARACTERS FROM SUBJOB
;ROUTINE TO SET UP A READ FILE
READ: NOISE (COMMANDS FROM FILE) ;PARSE NOISE
SKIPE RDJFN ;READING ALREADY?
JRST [ TRYLOG ;TRY TO LOG COMMAND LINE
ERRMES (<? Doing a "GET" within a "GET" is illegal>)
JRST COMLVL]
MOVX A,GJ%OLD ;GTJFN FLAG
MOVEM A,GTJBLK ;PLACE IN GTJFN BLOCK
MOVE A,[POINT 7,[ASCIZ "PTYCON"]] ; DEFAULT FILENAME
MOVEM A,GTJBLK+.GJNAM ;PLACE IN GTJFN BLOCK
MOVE A,[POINT 7,[ASCIZ "ATO"]] ;DEFAULT EXTENSION
MOVEM A,GTJBLK+.GJEXT ;STORE IN GTJFN BLOCK
PUSHJ P,RDFJFN ;PARSE FILESPEC
HRRZM A,RDJFN ;SAVE JFN
READ1: MOVE B,[7B5+1B19] ;NOW OPEN IT
OPENF
JRST RDOPNF ;FAILED
MOVEI A,.NULIO ;DON'T READ FROM TTY ANYMORE
HRLM A,CMDSBK+.CMIOJ ;SETUP INPUT JFN FOR COMND
JRST COMLVL ;RETURN
RDOPNF: PUSH P,A
MOVE A,RDJFN ;RELEASE JFN
RLJFN
JFCL
SETZM RDJFN
POP P,A
RDGTJF: PUSH P,A ;MOVE ERROR CODE
PUSHJ P,CHKLM ;AT LEFT MARGIN?
PUSHJ P,CRLF ;NO, TYPE CRLF
POP P,B ;GET ERROR CODE
PUSHJ P,TYPERR ;AND TYPE ERROR MESSAGE
JRST COMLVL
RDFJFN: SKIPE A,JFNIP ;ALREADY HAVE A JFN?
PUSHJ P,RELJFN ;YES, RELEASE IT
MOVEI A,CMDSBK ;GET COMMAND STATE BLOCK ADDRESS
MOVEI B,[FLDDB. .CMFIL,<CM%HPP+CM%SDH>,,<filespec>] ;FDB
COMND ;PARSE FILESPEC
ERJMP FJERR ;FATAL JSYS ERROR
TXNE A,CM%NOP ;PARSE SUCCESSFUL?
JRST COMERR ;NO, OUTPUT ERROR
MOVEM B,JFNIP ;SAVE JFN
CONFIRM ;CONFIRM COMMAND
MOVE A,JFNIP ;PLACE JFN IN A
SETZM JFNIP ;CLEAR FLAG
RET ;RETURN
RELJFN: RLJFN ;RELEASE THE JFN
ERJMP .+1 ;ERROR, CONTINUE ANYWAY
SETZM JFNIP ;CLEAR FLAG
RET ;RETURN
; ROUTINE TO GET MORE FROM ATO FILE WHEN EOF REACHED DURING PARSE
GETMOR: HRROI A,CMDBUF ;READ IN COMMAND ENTERED SO FAR
MOVE B,.NULIO ;DON'T WRITE IT ANYWHERE
MOVEI C,CBUFSZ*5-1 ;NUMBER OF CHARACTERS TO READ
SETZM D ;STOP AT ZERO
SIN
ERJMP .+1 ;SHOULDN'T HAPPEN!
SUBI C,CBUFSZ*5-1 ;CALCULATE NUMBER OF CHARACTERS
SETCA 3,0 ;FORM TWOS COMPLEMENT
MOVEM C,CMDCNT ;STORE NEW COMMAND COUNT
SETZM C ;CLEAR HYPHEN FLAG
MOVE D,CMDSBK+.CMPTR ;POINT TO CORRECT POSITION IN BUFFER
SKIPE CMDCNT ;IS THERE ANYTHING IN BUFFER ALREADY?
IBP D ;ADJUST POINTER PAST LAST CHARACTER
PUSHJ P,RCONV ;FILL BUFFER
MOVE A,CMDCNT ;UPDATE UNPARSED CHARACTERS
MOVEM A,CMDSBK+.CMINC
MOVE A,CMDSBK+.CMBFP ;RESET POINTER TO START OF BUFFER
MOVEM A,CMDSBK+.CMPTR
MOVEI A,CBUFSZ*5-1 ;RESET BUFFER SIZE
MOVEM A,CMDSBK+.CMCNT
JRST COM0 ;PARSE REST OF COMMAND
; ROUTINE TO READ IN AND CONVERT ATO FILE FOR GET COMMAND
; THE ^a (WHERE ^ IS UPARROW AND a IS A CHARACTER) IS CONVERTED
; INTO THE TRUE CONTROL CHARACTER. ^$ IS CONVERTED TO AN ESCAPE.
GCNVT: SETZM C ;CLEAR HYPHEN FLAG
SETZM CMDCNT ;NO CHARACTERS YET
MOVE D,CMDSBK+.CMBFP ;POINT TO COMMAND BUFFER
RCONV: MOVE A,RDJFN ;GET CHARACTER FROM ORIGINAL ATO
BIN
ERJMP RCOND ;CHECK TO SEE IF IT IS DONE
SKIPG CMDCNT ;ANYTHING ENTERED YET?
JRST [ CAIE B," " ;NO, IS THIS A SPACE
CAIN B,.CHTAB ;OR A TAB?
JRST RCONV ;YES, DISREGARD
JRST .+1] ;NO, PROCESS
CAIL B,"a" ;LOWER CASE?
CAILE B,"z"
SKIPA ;NO
SUBI B,40 ;YES, CONVERT TO UPPER CASE
CAIN B,"^" ;UPARROW?
PUSHJ P,[BIN ;YES, GET NEXT CHARACTER
CAIN B,"^" ;ANOTHER UPARROW?
POPJ P, ;YES, RETURN
CAIN B,"$" ;DOLLAR SIGN?
JRST [MOVEI B,33
POPJ P,] ;YES, MAKE IT AN ALTMODE
CAIL B,141 ;LOWER CASE?
CAILE B,172
SKIPA ;NO
SUBI B,40 ;YES, MAKE IT UPPER CASE
TRZ B,100 ;MAKE IT A CONTROL
POPJ P,]
MOVE A,D ;WRITE IT TO THE COMMAND BUFFER
BOUT
ERJMP RCOND ;PROCESS ERROR
MOVE D,A ;SAVE UPDATED POINTER
AOS CMDCNT ;ONE MORE UNPARSED CHARACTER
CAMN B,TRPCHR ;WAS IT THE ESCAPE CHARACTER?
JRST [ SETZM A ;
IDPB A,D ;END COMMAND LINE
TRYLOG ;TRY TO LOG IT
PUSHJ P,CRLF ;END LINE
JRST COMLVL] ;AND RETURN TO COMMAND LEVEL
CAIN B,.CHESC ;WAS CHARACTER AN ESCAPE?
RET ;YES, PARSE COMMAND SO FAR
CAIN B,.CHLFD ;WAS CHARACTER A LINE FEED?
JRST [ MOVE A,CMDCNT ;GET NUMBER OF CHARACTERS ENTERED
CAIE A,1 ;WAS THERE ONLY THE LF?
RET ;NO, RETURN TO PARSE LINE
SETZM CMDBUF ;ERASE GARBAGE
JRST GCNVT] ;YES, NULL LINE SO DON'T PARSE
CAIN B,.CHCRT ;WAS CHARACTER A CR?
JRST RCON1 ;YES, HANDLE SPECIAL CASE
SETZM C ;CLEAR HYPHEN FLAG
CAIN B,"-" ;WAS CHARACTER A HYPHEN?
SETOM C ;YES, SET HYPHEN FLAG
JRST RCONV ;NO, PROCESS NEXT CHARACTER
RCON1: MOVE A,RDJFN ;READ IN NEXT CHARACTER
BIN
ERJMP RCOND ;PROCESS ERROR
CAIN B,.CHLFD ;CHARACTER A LINE FEED?
JRST [ MOVE A,D ;YES, PLACE IN COMMAND BUFFER
BOUT
MOVE D,A ;SAVE POINTER
AOS CMDCNT ;ONE MORE UNPARSED CHARACTER
JRST RCON2] ;CONTINUE
BKJFN ;PUT CHARACTER BACK
ERJMP .+1 ;IGNORE ERROR
RCON2: SKIPL C ;WAS A HYPHEN ENTERED BEFORE CR?
JRST [ MOVE A,CMDCNT ;GET NUMBER OF CHARACTERS ENTERED
CAIE A,2 ;WERE THERE ONLY THE CR AND LF?
RET ;NO, RETURN TO PARSE LINE
SETZM CMDBUF ;ERASE GARBAGE
JRST GCNVT] ;YES, NULL LINE SO DON'T PARSE
SETZM C ;YES, CLEAR HYPHEN FLAG
JRST RCONV ;CONTINUE TO READ IN COMMAND
RCOND: MOVE A,RDJFN ;GET ORIGINAL JFN
GTSTS ;GET STATUS
TXNE B,GS%EOF ;END OF FILE?
JRST GEOF ;YES
ERRMES(<? Error while converting ATO file - conversion and GET aborted>) ;TELL USER
JRST GEOF ;END GET
;ROUTINE TO PRINT COMMAND LINE DURING GET COMMAND
PRTCMD: SKIPE SILNCF ;WAS OUTPUT SILENCED?
RET ;YES, RETURN
HRROI A,CMDBUF ;NO, PRINT COMMAND BUFFER
PSOUT ;TO TERMINAL
ERJMP .+1 ;IGNORE ERROR
RET ;RETURN
SILNCE: NOISE (ALL OUTPUT TO TERMINAL) ;PARSE NOISE WORDS
CONFIRM ;CONFIRM COMMAND
SETZM SILNCF ;INIT SILENCE FLAG
SKIPN NOFLAG ;WAS THIS A "NO SILENCE" REQUEST?
SETOM SILNCF ;NO, THEN SILENCE THE OUTPUT FROM GET
SKIPN RDJFN ;PROCESSING A GET COMMAND?
JRST [WRNMES (<% This is only effective from within a command file
>)
SETZM SILNCF ;DISALLOW SILNCF
JRST COMLVL] ;NO, ISSUE WARNING
MOVEI A,.PRIOU ;ASSUME "NO SILENCE"
SKIPE SILNCF ;WAS THIS A "NO SILENCE"
MOVEI A,.NULIO ;NO, DONT PRINT PROMPT
HRRM A,CMDSBK+.CMIOJ ;PLACE IN COMMAND STATE BLOCK
JRST COMLVL
; ROUTINE TO SET UP A LOG FILE
LOG: NOISE (OUTPUT TO FILE) ;PARSE NOISE WORDS
SKIPE NOFLAG ;USER SAY "NO"?
JRST NOLOG ;YES, GO TURN OFF LOGGING
SETZM GTJBLK ;CLEAR GTJFN FLAGS
MOVE A,[POINT 7,[ASCIZ "PTYCON"]] ;DEFAULT FILENAME
MOVEM A,GTJBLK+.GJNAM ;PLACE IN GTJFN BLOCK
MOVE A,[POINT 7,[ASCIZ "LOG"]] ;DEFAULT EXTENSION
MOVEM A,GTJBLK+.GJEXT ;PLACE IN GTJFN BLOCK
PUSHJ P,RDFJFN ;GET FILE JFN
LOG3: HRRZS A ;CLEAR LEFT HALF OF JFN
EXCH A,LOGJFN ;SAVE NEW LOGGING JFN
SKIPE A ;WAS THERE A JFN
CLOSF ;CLOSE THE OTHER ONE
JFCL
HRRZ A,LOGJFN ;GET BACK JFN
MOVE B,[7B5+1B20+1B22] ;APPEND MODE
OPENF
JRST LGOPNF ;OPEN FAILED
HRROI B,[ASCIZ/
************************************************************************
PTYCON LOG FILE /]
SETZ C,
SOUT ;SEND OUT HEADER
SETO B, ;NOW SEND OUT THE DATE
ODTIM
HRROI B,[ASCIZ/
/]
SOUT
MOVE B,LOGJFN ;GET JFN
HRROI A,LOGBUF ;POINT TO LOG NAME BUFFER
MOVX C,JS%SPC ;WANT ENTIRE FILESPEC
SETZ D, ;CLEAR UNUSED REGISTER
JFNS ;CONVERT JFN TO STRING
ERJMP COMLVL ;IGNORE ERROR
JRST COMLVL ;AND RETURN
LGOPNF: PUSH P,A ;SAVE ERROR CODE
MOVE A,LOGJFN ;GET JFN
RLJFN ;RELEASE IT
JFCL
SETZM LOGJFN ;CLEAR JFN WORD
POP P,A ;GET BACK ERROR
JRST RDGTJF ;GO TYPE OUT ERROR MESSAGE
LOGCLS: SKIPN LOGJFN ;IS THERE A LOG FILE OPEN
POPJ P, ;NO, RETURN
PUSHJ P,PIOFF ;DON'T ALLOW INTERRUPTS HERE
MOVE A,LOGJFN ;GET LOGGING JFN
HRLI A,(1B0) ;CLOSE IT BUT KEEP THE JFN
CLOSF
JRST LGCLSF ;HAD A PROBLEM, GO TYPE MESSAGE
HRRZ A,LOGJFN ;GET JFN AGAIN
MOVE B,[7B5+1B20+1B22] ;OPEN IT AGAIN IN APPEND MODE
OPENF
JRST LGCLSF ;FAILED
PUSHJ P,PION ;TURN PI'S BACK ON
POPJ P, ;RETURN
LGCLSF: PUSH P,A ;SAVE ERROR CODE
PUSHJ P,PION ;TURN INTERRUPTS BACK ON
POP P,A ;GET BACK ERROR CODE
JRST LGOPNF ;GO TYPE OUT ERROR MESSAGE
NOLOG: CONFIRM ;CONFIRM COMMAND
HRRZ A,LOGJFN ;GET JFN OF LOGGING DEVICE
JUMPE A,COMLVL ;IF NONE, DON'T CLOSE IT
CLOSF ;CLOSE IT
JRST LGOPNF ;BAD
SETZM LOGJFN ;CLEAR JFN WORD
JRST COMLVL ;ALL THROUGH
; ROUTINE TO SET UP A SAVE INPUT FILE
SAVINP: NOISE (INPUT IN FILE) ;PARSE NOISE WORDS
SKIPE NOFLAG ;USER SAY "NO"?
JRST NOSAVI ;YES, GO TURN OFF LOGGING
SETZM GTJBLK ;CLEAR GTJFN FLAGS
MOVE A,[POINT 7,[ASCIZ "SAVED-INPUT"]] ;DEFAULT FILENAME
MOVEM A,GTJBLK+.GJNAM ;SAVE IN GTJFN BLOCK
MOVE A,[POINT 7,[ASCIZ "TXT"]] ;DEFAULT EXTENSION
MOVEM A,GTJBLK+.GJEXT ;SAVE IN GTJFN BLOCK
PUSHJ P,RDFJFN ;GET FILE JFN
SVI3: HRRZS A ;CLEAR LEFT HALF OF JFN
EXCH A,SVIJFN ;SAVE NEW LOGGING JFN
SKIPE A ;WAS THERE A JFN
CLOSF ;CLOSE THE OTHER ONE
JFCL
HRRZ A,SVIJFN ;GET BACK JFN
MOVE B,[7B5+OF%WR] ;OPEN FOR WRITE
OPENF
JRST SVIPNF ;OPEN FAILED
HRROI B,[ASCIZ/
************************************************************************
PTYCON SAVED INPUT FILE /]
SETZ C,
SOUT ;SEND OUT HEADER
SETO B, ;NOW SEND OUT THE DATE
ODTIM
HRROI B,[ASCIZ/
/]
SOUT
JRST COMLVL ;AND RETURN
SVIPNF: PUSH P,A ;SAVE ERROR CODE
MOVE A,SVIJFN ;GET JFN
RLJFN ;RELEASE IT
JFCL
SETZM SVIJFN ;CLEAR JFN WORD
POP P,A ;GET BACK ERROR
JRST RDGTJF ;GO TYPE OUT ERROR MESSAGE
NOSAVI: CONFIRM ;CONFIRM COMMAND
HRRZ A,SVIJFN ;GET JFN OF LOGGING DEVICE
JUMPE A,COMLVL ;IF NONE, DON'T CLOSE IT
CLOSF ;CLOSE IT
JRST SVIPNF ;BAD
SETZM SVIJFN ;CLEAR JFN WORD
JRST COMLVL ;ALL THROUGH
;SAVE INPUT IN FILE IF ONE HAS BEEN SPECIFIED
LOGINP: SAVEAC <A,B,C>
SKIPN A,SVIJFN ;HAVE A JFN?
RET ;NO
CAIN B,.CHESC ;CHECK SPECIAL CHARACTERS, ESC
JRST [ MOVEI B,"^"
BOUT
MOVEI B,"$"
JRST SAVIP1]
CAIN B,.CHCRT ;CR
JRST [ BOUT ;PUT IN LF TOO
MOVEI B,.CHLFD
JRST SAVIP1]
CAIN B,.CHDEL ;A RUBOUT?
JRST [ BKJFN ;YES, TRY TO DELETE LAST CHAR FROM FILE
SKIPA A,SVIJFN ;COULDN'T, GET JFN BACK
RET ;OK, DON'T NEED TO PUT RUBOUT IN FILE
MOVEI B,.CHDEL ;MUST PUT RUBOUT IN FILE
JRST SAVIP1]
CAIGE B,40 ;PRINTING CHAR
CAIN B,.CHTAB ;OR TAB
JRST SAVIP1 ;YES, SEND AS IS
MOVE C,B ;CONTROL CHAR, SAVE IT
MOVEI B,"^"
BOUT ;SEND ESCAPE CHAR
MOVEI B,100(C) ;CONVERT CONTROL TO PRINTING EQUIV
SAVIP1: BOUT
RET
TYPERR: HRROI A,ERRSTR ;PUT MESSAGE INTO A STRING
HRLI B,400000
SETZ C,
ERSTR ;TYPE ERROR
JFCL
SKIPA A,[POINT 7,[ASCIZ/unknown error code/]]
HRROI A,ERRSTR
PUSHJ P,TTSOUT ;TYPE OUT STRING
PUSHJ P,CRLF ;END LINE
POPJ P,
FJERR: MOVX A,.FHSLF ;SET PROCESS TO SELF
GETER ;GET LAST ERROR
ERJMP .+1 ;ERROR, CONTINUE ANYWAY
HRRZ B,B ;GET RID OF PROCESS HANDLE
CAIE B,IOX4 ;END OF FILE REACHED?
CAIN B,COMNX9 ;END OF INPUT FILE REACHED?
JRST GETMOR ;YES, HANDLE CONDITION
PUSH P,B ;SAVE ERROR CODE
TRYLOG ;TRY TO LOG COMMAND LINE
POP P,B ;GET ERROR CODE BACK
CAIE B,COMNX2 ;FIELD TOO LONG?
CAIN B,COMNX3 ;COMMAND TOO LONG?
JRST TOOLNG ;OUTPUT APPROPRIATE ERROR MESSAGE
WRNMES (<? Fatal JSYS error - >) ;PRINT FIRST PART OF MSG
PUSHJ P,TYPERR ;PRINT REST OF ERROR MESSAGE
JRST EXIT1 ;EXIT FROM PTYCON
TOOLNG: TRYLOG ;TRY TO LOG COMMAND LINE
ERRMES (<? Line too long>) ;OUTPUT ERROR MESSAGE
JRST COMLVL ;GET ANOTHER COMMAND
;ROUTINE TO KILL A JOB
KILL: NOISE (SUBJOB) ;PARSE NOISE
SETOM NODEF ;DISALLOW DEFAULT OF "ALL"
SETZM ARGCNT ;INITIALIZE ARGUMENT COUNT
KILL1: PUSHJ P,GETSJB
JRST ILLSJB ;NO MATCH, COMMAND ERROR
JRST KILL2 ;USER TYPED ALL
PUSHJ P,COMACR ;PARSE COMMA OR CONFIRM
JRST [PUSHJ P,SAVARG ;COMMA - SAVE SUBJOB INDEX
JRST KILL1] ;THEN GO BACK FOR MORE
PUSHJ P,SAVARG ;SAVE SUBJOB INDEX
KILL3: MOVE I,ARGS(D) ;GET SUBJOB INDEX
PUSHJ P,DELNAM ;DELETE SUBJOB NAME FROM TABLE
PUSHJ P,KILJOB ;KILL THE JOB
SOJL D,COMLVL ;DECREMENT ARGUMENT COUNT
JRST KILL3 ;CONTINUE FOR NEXT ARGUMENT
KILL2: CONFIRM ;CONFIRM COMMAND
PUSH P,I ;SAVE SUBJOB INDEX
PUSH P,P1 ;AND PERMANENT ACS
MOVE P1,PTYHGH ;SET UP TO SCAN ALL SUBJOBS
MOVEI I,0 ;START AT 0
KILLLP: PUSHJ P,DELNAM ;DELETE SUBJOB NAME FROM TABLE
PUSHJ P,KILJOB ;KILL EACH ONE
ADDI I,PTYLEN ;GO TO NEXT SUBJOB
SOJGE P1,KILLLP ;LOOP FOR ALL SUBJOBS
POP P,P1 ;RESTORE PERMANENT ACS
POP P,I
JRST COMLVL ;GO BACK TO COMMAND LEVEL
KILJOB: SKIPN A,PTYTTD(I) ;IS THERE A JOB STARTED HERE?
POPJ P, ;NO, DON'T KILL IT
HRLZS A ;GET TTY NUMBER
TLZ A,400000 ;TURN OFF TTY DESIGNATOR
HRR A,TTYJOB ;GET TTYJOB TABLE NUMBER FOR GETAB
GETAB ;GET JOB NUMBER ASSOCIATED WITH TTY
JRST KILJB1 ;FAILED
HLRES A
JUMPL A,KILJB1 ;IF -1 OR -2, THEN NO JOB
LGOUT ;LOG THIS JOB OUT
JRST [ HRROI A,[ASCIZ/Could not kill subjob /]
PUSHJ P,TTSOUT
PUSHJ P,TYPNAM
PUSHJ P,CRLF
POPJ P,]
KILJB1: HRRZ A,PTYJFN(I) ;THEN RELEASE JFN
CLOSF
JFCL ;JOB WILL BECOME DETACHED
SETZM PTYTAB(I) ;MARK THAT JOB WAS KILLED
HRLI A,PTYTAB(I) ;CLEAR UP ALL TRACKS
HRRI A,PTYTAB+1(I)
BLT A,PTYTAB+PTYLEN-1(I)
POPJ P, ;AND RETURN
DELNAM: PUSH P,B ;SAVE REGISTER
MOVE A,PTYNAM(I) ;GET PTY NAME
AND A,ALLMSK ;STRIP OFF ANY GARBAGE
CAMN A,[ASCIZ "ALL"] ;WAS NAME ALL?
JRST DELRET ;YES, DON'T DELETE
MOVEI A,NAMTBL ;ADDRESS OF SUBJOB NAME TABLE
HRROI B,PTYNAM(I) ;POINTER TO NAME
TBLUK ;FIND NAME IN TABLE
ERJMP .+1 ;IGNORE ERROR
TXNN B,TL%EXM ;AN EXACT MATCH FOUND?
JRST DELRET ;NO, RETURN
MOVE B,A ;MOVE ADDRESS OF NAME
MOVEI A,NAMTBL ;ADDRESS OF NAME TABLE
TBDEL ;DELETE ENTRY
ERJMP .+1 ;IGNORE ERROR
DELRET: POP P,B ;RESTORE REGISTER
RET ;RETURN
;ROUTINE TO READ IN A SUBJOB NUMBER OR NAME AND SET UP I
;CALL GETSJB
;RETURN +1 NO SUBJOB MATCH
; +2 USER SAID "ALL"
; +3 SUBJOB # IN I
GETSJB: MOVEI B,[FLDDB. .CMFLD,CM%HPP,,<subjob number or subjob name>,ALL]
;FUNCTION BLOCK
MOVE C,(B) ;GET FIRST WORD OF FUNCTION BLOCK
TXO C,CM%DPP ;ASSUME DEFAULT OF "ALL" ALLOWED
HRROI A,[ASCIZ "ALL"] ;SETUP POINTER
MOVEM A,.CMDEF(B) ;STORE IN FUNCTION BLOCK
SKIPE NODEF ;IS DEFAULT OF "ALL" ALLOWED?
TXZ C,CM%DPP ;NO, CLEAR DEFAULT FLAG
MOVEM C,(B) ;REPLACE IN FUNCTION BLOCK
SKIPE CONDEF ;IS A SPECIAL CONNECT DEFAULT REQUIRED?
JRST [HRROI A,CONDEF ;YES, SETUP POINTER
MOVEM A,.CMDEF(B) ;STORE IN FUNCTION BLOCK
JRST .+1] ;CONTINUE
MOVEI A,CMDSBK ;RESTORE ADDRESS OF COMMAND STATE BLOCK
COMND ;PARSE SUBJOB FIELD
ERJMP FJERR ;FATAL JSYS ERROR
PUSHJ P,FNDPTY ;SEE IF THIS WAS A LEGAL JOB #
JRST GTSJB2 ;NO
JRST CPOPJ2 ;TAKE DOUBLE SKIP RETURN
GTSJB2: MOVE A,ATMBUF ;NOW CHECK FOR "ALL"
AND A,ALLMSK ;MASK OFF GARBAGE
CAME A,[ASCIZ/ALL/]
POPJ P, ;COMMAND ERROR
JRST CPOPJ1 ;GIVE SKIP RETURN FOR "ALL"
IGNOR: NOISE (OUTPUT FROM SUBJOB) ;PARSE NOISE WORDS
SETOM NODEF ;DISALLOW DEFAULT OF "ALL"
SETZM ARGCNT ;INITIALIZE ARGUMENT COUNT
IGNOR0: PUSHJ P,GETSJB ;GET THE ARGUMENT
JRST ILLSJB ;NO MATCH, COMMAND ERROR
JRST IGNOR1 ;"ALL"
PUSHJ P,COMACR ;PARSE COMMA OR CONFIRM
JRST [PUSHJ P,SAVARG ;COMMA, SAVE SUBJOB INDEX
JRST IGNOR0] ;GET NEXT SUBJOB
PUSHJ P,SAVARG ;SAVE SUBJOB INDEX
IGNOR3: MOVE I,ARGS(D) ;GET SUBJOB INDEX
MOVSI B,PTIGNF ;USER GAVE A LEGAL SUBJOB #
MOVE C,[IORM B,PTYSTS(I)]
SKIPE NOFLAG ;DOES USER WANT TO SET OR CLEAR IT
MOVE C,[ANDCAM B,PTYSTS(I)]
XCT C ;SET OR CLEAR THE IGNORE FLAG
SOJL D,COMLVL ;DECREMENT ARGUMENT COUNT
JRST IGNOR3 ;CONTINUE FOR NEXT ARGUMENT
IGNOR1: CONFIRM ;CONFIRM COMMAND
MOVSI B,PTIGNF ;SET UP TO SET OR CLEAR IGNORE BIT
MOVE C,[IORM B,PTYSTS(I)]
SKIPE NOFLAG ;IF USER SAID "NO", THEN CLEAR BIT
MOVE C,[ANDCAM B,PTYSTS(I)]
MOVE D,PTYHGH ;LOOP FOR ALL SUBJOBS
MOVEI I,0 ;STARTING AT 0
IGNOR2: XCT C ;SET OR CLEAR THE IGNORE BIT
ADDI I,PTYLEN ;STEP TO NEXT SUBJOB
SOJGE D,IGNOR2 ;LOOP BACK FOR ALL SUBJOBS
SETOM IGNALL ;SET IGNORE ALL FLAG
SKIPE NOFLAG ;WAS A NO TYPED?
SETZM IGNALL ;YES, CLEAR FLAG
JRST COMLVL ;THEN RETURN TO COMMAND LEVEL
;WHAT ROUTINE
WHATPT: NOISE (IS STATE OF SUBJOB) ;PARSE NOISE WORDS
PUSHJ P,GETSJB ;GET A SUBJOB NUMBER IN I
JRST ILLSJB ;NO MATCH, COMMAND ERROR
JRST WHAT5 ;USER TYPED "ALL"
CONFIRM ;CONFIRM COMMAND
SETZM TOFLAG ;INITIALIZE TYPE OUT FLAG
SKIPN PTYJFN(I) ;DOES THIS JOB EXIST?
JRST [HRROI A,[ASCIZ/Subjob "/] ;NO
PUSHJ P,TTSOUT ;TYPE "SUBJOB X NOT IN USE"
PUSHJ P,TYPNUM ;TYPE #
HRROI A,[ASCIZ/" not in use/]
PUSHJ P,TTSOUT
SETOM TOFLAG ;INDICATE TYPEOUT OCCURRED
JRST WATDON] ;AND EXIT
PUSHJ P,TYPSYS ;GO TYPE OUT SYSTAT FOR THIS JOB
JRST WATDON ;AND EXIT
WHAT5: CONFIRM ;CONFIRM COMMAND
SETOM LMFLAG ;AT LEFT MARGIN
PUSH P,P1 ;SAVE PERMANENT ACS
PUSH P,I
MOVEI I,0 ;START AT # 0
MOVE P1,PTYHGH ;AND LOOP FOR ALL JOBS
SETZM TOFLAG ;INIT TYPE OUT FLAG FOR "NONE ACTIVE"
WHATLP: PUSHJ P,TYPSYS ;GO TYPE SYSTAT FOR EACH JOB
ADDI I,PTYLEN ;STEP TO NEXT JOB
SOJGE P1,WHATLP ;LOOP BACK FOR ALL JOBS
POP P,I
POP P,P1
WATDON: SKIPE TOFLAG ;WAS ANYTHING TYPED
JRST [PUSHJ P,CRLF ;END LINE
JRST COMLVL] ;WE ARE THROUGH
HRROI A,[ASCIZ/None active
/] ;NO ACTIVE SUBJOBS
PUSHJ P,TTSOUT ;NO, TELL USER SOMETHING
JRST COMLVL ; AND RETURN TO COMLVL
;ROUTINE TO TYPE A SYSTAT OF JOB
TYPSYS: CALL ASCTER ;SETUP AS ASCII TERMINAL
SKIPN PTYJFN(I) ;IS THERE A JOB HERE
POPJ P, ;NO, TYPE NOTHING
SETOM TOFLAG ;SAY SOMETHING WAS TYPED
PUSHJ P,CHKLM ;SEE IF ON LEFT MARGIN
PUSHJ P,CRLF ;NO, PUT US THERE
PUSHJ P,TYPNAM ;START WITH NAME OF SUBJOB
PUSHJ P,TYPTAB ;TAB
HRLZ A,PTYTTD(I) ;NOW SEE IF LOGGED IN
TLZ A,400000
HRR A,TTYJOB ;GET TABLE # FOR GETAB
GETAB
JRST TYPSNJ ;FAILED!
HLRE B,A ;GET TSS JOB NUMBER
JUMPL B,TYPSNJ ;IF -1 OR -2, THEN NOT LOGGED IN
PUSH P,B ;SAVE JOB NUMBER
HRROI A,STRING ;PUT NUMBER IN STRING
MOVEI C,12
NOUT
JFCL
HRROI A,STRING ;NOW TYPE OUT NUMBER
PUSHJ P,TTSOUT ;SO NUMBER GETS IN LOG
PUSHJ P,TYPTAB
MOVE A,0(P) ;GET THE JOB NUMBER
MOVE B,[-JITBLN,,JITAB] ;GET INFO ABOUT THIS JOB
SETZ C,
GETJI
JRST TYPSY2 ;IF NONE, DONT TYPE ANY MORE
MOVE B,JITAB+.JIUNO ;GET USER NUMBER
JUMPE B,[PUSHJ P,TYPSN1 ;NOT LOGGED IN IF 0
JRST TYPSY1]
HRROI A,STRING ;OUTPUT NAME TO STRING
DIRST ;TYPE OUT LOGGED IN NAME
JFCL
HRROI A,STRING
PUSHJ P,TTSOUT ;NOW TYPE OUT NAME
PUSHJ P,TYPTAB
MOVE A,JITAB+.JIPNM ;GET PROGRAM NAME
PUSHJ P,TYPSIX ;TYPE IT OUT
TYPSY1: PUSHJ P,TYPTAB
HRRZ A,PTYJFN(I)
MOVEI B,25 ;NOW SEE IF LINE IS HUNGRY
MTOPR
HRROI A,[ASCIZ/RN/] ;ASSUME NOT HUNGRY
SKIPE B ;IS IT HUNGRY
HRROI A,[ASCIZ/TI/] ;YES
SKIPE PTYCNT(I) ;IF JOB HAS OUTPUT WAITING,
HRROI A,[ASCIZ/TO/] ; THEN ALWAYS SAY "TO"
PUSHJ P,TTSOUT ;TYPE OUT STATE
PUSHJ P,TYPSY3 ;TYPE OUT I OR R IF NECESSARY
PUSHJ P,TYPTAB
MOVE A,JITAB+.JIRT ;GET RUN TIME OF THE JOB
IDIVI A,^D1000 ;TURN IT INTO SECONDS
IDIVI A,^D60 ;GET SECONDS
PUSH P,B ;SAVE SECONDS
IDIVI A,^D60 ;GET MINUTES
PUSH P,B
PUSHJ P,TTDNUM ;TYPE OUT THE DECIMAL HOURS
MOVEI A,":" ;FOLLOWED BY ":"
PUSHJ P,TTBOUT
POP P,A ;GET MINUTES
PUSHJ P,TTDNUM
MOVEI A,":"
PUSHJ P,TTBOUT
POP P,A ;AND NOW DO THE SECONDS
PUSHJ P,TTDNUM
TYPSY2: POP P,(P)
POPJ P,
TYPSY3: SETZ A, ;NOW SEE IF BEING REFUSED OR IGNORED
MOVE D,PTYSTS(I)
TLNE D,PTREFF ;REFUSED FLAG SET?
HRROI A,[ASCIZ/(R)/] ;YES, SAY SO
TLNE D,PTIGNF ;LINE BEING IGNORED?
HRROI A,[ASCIZ/(D)/] ;YES, THIS OVERRIDES REFUSED FLAG
SKIPE A
PUSHJ P,TTSOUT ;PRINT OUT STATE IF ON
POPJ P, ;AND RETURN
TYPTAB: PUSH P,B ;SAVE ACS
MOVEI A,.PRIOU ;GET COLUMN COUNT
RFPOS
HRRZ A,B
IDIVI A,TABSIZ ;GET NUMBER OF SPACES TO TYPE
MOVNS B ;CALCULATE NUMBER REMAINING
ADDI B,TABSIZ
MOVEI A," " ;SIMULATE WITH SPACES
CALL TTBOUT
SOJG B,.-1
POP P,B ;RESTORE ACS
POPJ P,
TYPSNJ: HRROI A,[ASCIZ/NO JOB NUMBER ASSIGNED TI/]
PUSHJ P,TTSOUT
PUSHJ P,TYPSY3 ;TYPE OUT I OR R IF NECESSARY
POPJ P,
TYPSNL: POP P,(P)
TYPSN1: HRROI A,[ASCIZ/NOT LOGGED IN/]
PUSHJ P,TTSOUT
POPJ P,
TYPSIX: MOVE D,A ;SAVE ARG
MOVEI C,6 ;TYPE A MAX OF 6 CHARS
MOVE B,[POINT 6,D] ;SET UP BYTE POINTER
TYPSXL: ILDB A,B ;GET NEXT CHAR
ADDI A,40 ;CONVERT TO ASCII
PUSHJ P,TTBOUT ;TYPE IT OUT
SOJG C,TYPSXL ;LOOP FOR 6 CHARS
POPJ P,
TTDNUM: MOVEI C,12 ;DECIMAL OUTPUT
MOVE B,A ;GET CHARACTER
HRROI A,STRING ;GET ANSWER INTO A STRING
NOUT
BUG (CHK,<NOUT failed>)
HRROI A,STRING ;NOW OUTPUT THE ANSWER
PUSHJ P,TTSOUT
POPJ P,
;ROUTINE TO DO OUTPUT FROM PTY'S
PTOCHK: MOVE A,BINTTY
MOVEM A,TERJFN ;SET UP BINARY CHANNEL FOR PTY TO TTY PIPELINE.
;ALTERNATE ENTRY POINT FOR WHEN TTY IS KNOWN TO ALREADY BE IN BINARY MODE ...
PTOCK9:
HRRES I ;CLEAR LEFT HALF OF INDEX
MOVEM I,CURENT ;REMEMBER THIS JOB INDEX
JUMPL I,PTOCK0 ;IF -1, THEN NO SPECIFIC JOB NUMBER
PUSHJ P,PTYTP2 ;GO TYPE OUT TEXT FROM THIS LINE
POPJ P, ;TYPE IN WAS SEEN
PTOCK0: PUSH P,P2 ;NOW CHECK OTHER PTY'S
PUSH P,P1
PUSH P,I
SETZB I,P2 ;START AT 0
MOVE P1,PTYHGH ;AND DO ALL JOBS
PTOCK1: SKIPN PTYCNT(I) ;IS THERE ANYTHING WAITING ON THIS
JRST PTOCK2 ;NO, GO ON TO NEXT
MOVE A,PTYSTS(I) ;YES, GET STATUS
TLNE A,PTREFF ;BEING REFUSED?
TLNE A,PTIGNF ;AND NOT IGNORED?
SKIPA ;NO
JRST [PUSHJ P,DINGGO ;YES, START DING FORK UP
AOJA P2,PTOCK2] ;MARK THAT ONE WAS FOUND WAITING
PUSHJ P,PTYTYP ;TYPE OUT HEADER AND TEXT
JRST PTOCK3 ;TYPE IN IS NOW PENDING
PTOCK2: ADDI I,PTYLEN ;STEP TO NEXT JOB NUMBER
SOJGE P1,PTOCK1 ;LOOP BACK FOR ALL LINES
SKIPN P2 ;WERE ANY LINES WAITING
PUSHJ P,STDING ;NO, THEN STOP THE DINGING
PTOCK3: POP P,I ;RESTORE ACS
POP P,P1
POP P,P2
JUMPL I,CPOPJ ;IF NO CURRENT JOB, JUST RETURN
PUSHJ P,PTYTYP ;TYPE OUT NEW HEADER IF NECESSARY
JFCL
POPJ P, ;AND RETURN
PTYTYP: SETZM IGNORF ;INITIALIZE IGNORE FLAG
MOVE A,PTYSTS(I) ;GET PTY STATUS
TLNE A,PTIGNF ;IGNORING TYPE OUT?
SETOM IGNORF ;YES, MARK IT SUCH
HRRE A,I ;GET SUBJOB INDEX
CAMN A,LSTHDR ;SAME AS LAST HEADER TYPED?
JRST PTYTP2 ;YES, DON'T TYPE A HEADER
MOVEI A,.PRIOU
DOBE ;WAIT FOR TTY TO BE QUIET
RFMOD ;NOW SEE IF CONTROL-O ON
TLZE B,(1B0)
SFMOD ;YES, CLEAR IT
CALL PIOFF ;PREVENT INTS
PUSH P,TERJFN ;SAVE PRESENT JFN STATE
CALL ASCTER ;GET ASCII TERMINAL
PUSHJ P,CHKLM ;SEE IF AT START OF A LINE
PUSHJ P,CRLF ;NO, GO TO LEFT MARGIN
HRROI A,[ASCIZ/**** /]
PUSHJ P,TTSOUT
PUSHJ P,TYPNAM ;TYPE JOB NAME
MOVEI A," "
PUSHJ P,TTBOUT
HRROI A,STRING
SETO B,
MOVSI C,(1B0)
ODTIM ;FOLLOWED BY THE DATE
HRROI A,STRING
PUSHJ P,TTSOUT ;AS A TIME STAMP
HRROI A,[ASCIZ/ ****
/]
PUSHJ P,TTSOUT ;END OF HEADER
POP P,TERJFN ;RESTORE TERM DESIGNATOR
CALL PION ;ENABLE INTS
SKIPN IGNORF ;IF BEING IGNORED, DON'T STORE I
HRREM I,LSTHDR ;REMEMBER THIS JOB INDEX
PTYTP2: HRRE C,I ;GET INDEX
SKIPGE CURENT ;AT COMMAND LEVEL?
JRST PTYTP7 ;YES, CHECK FOR TTY INPUT
CAME C,CURENT ;SEE IF THIS IS THE CURRENT JOB
JRST PTYTP5 ;NO
PTYTP7: MOVE A,TERJFN
SIBE ;ANY CHARACTERS IN INPUT BUFFER FOR TTY
JRST [SKIPE RDJFN ;READING FROM A FILE?
JRST PTYTP5 ;YES, DISREGARD TTY INPUT
SETZM IGNORF ;NO, THEN EXIT NOW
SETOM NOINT ;DON'T ALLOW ANY MORE PTY INTERRUPTS
POPJ P,] ;SO THOSE CHARACTERS CAN BE SENT
PTYTP5: MOVSI B,PTIGNF ;IGNORING THIS LINE?
TDNE B,PTYSTS(I) ;...
JRST PTYTP6 ;YES
CAME C,LSTHDR ;IS A HEADER NEEDED?
JRST PTYTYP ;YES, GO TYPE IT
PTYTP6: PUSHJ P,PTYGET ;GET A CHARACTER FROM BUFFER
JRST PTYTP4 ;NO MORE LEFT
PTYTP3: MOVSI B,PTIGNF ;LINE BEING IGNORED?
TDNE B,PTYSTS(I)
CAMN I,CURENT ;AND NOT THE CURRENT JOB
JRST PTYTP8 ;NO, TYPE OUT CHARACTER
PUSHJ P,TTBLG0 ;YES, JUST LOG THE CHARACTER
JRST PTYTP2 ;LOOP BACK
PTYTP4: MOVEI A,.PRIOU
DOBE ;WAIT FOR OUTPUT TO FINISH
PUSHJ P,PTYGET ;SEE IF ANY MORE CHARACTERS ARRIVED
JRST [SETZM IGNORF ;NO, ALL DONE
JRST CPOPJ1] ;RETURN SUCCESSFULLY
JRST PTYTP3 ;YES, GO TYPE THESE OUT
PTYTP8: PUSHJ P,TTBOUT ;TYPE THE CHARACTER
CAIN A,12 ;IS IT A LF?
JRST [MOVEI A,.PRIOU
RFPOS ;YES, GET FILE POSITION
HRRZS B ;RESET CTRL-Q COUNTER
SFPOS ;
JRST .+1] ;CONTINUE
JRST PTYTP2 ;LOOP BACK FOR MORE
TYPNAM: SKIPN D,PTYNAM(I) ;IS THERE A NAME FOR THIS LINE?
JRST TYPNM1 ;NO, JUST USE NUMBER
SETZ E, ;YES, TYPE IT OUT
HRROI A,D
PUSHJ P,TTSOUT
MOVEI A,"(" ;THEN TYPE "(JOB NUMBER)"
PUSHJ P,TTBOUT
PUSHJ P,TYPNUM ;TYPE OUT JOB NUMBER
MOVEI A,")"
PUSHJ P,TTBOUT
POPJ P,
TYPNM1: HRRE B,I ;GET SUBJOB NUMBER
IDIVI B,PTYLEN ; FROM INDEX
HRROI A,STRING
MOVEI C,12
NOUT ;CONVERT IT TO ASCIZ
JFCL
HRROI A,STRING
PUSHJ P,TTSOUT ;TYPE OUT NUMBER
POPJ P,
DINGGO: SKIPN BELLF ;IS BELL DISABLED
SKIPE DINGON ; OR ALREADY ON?
POPJ P, ;YES, DO NOTHING
MOVEI A,.FHSLF ;GET OUR PROCESS HANDLE
MOVX B,1B<.DNGCH> ;GET DING CHANNEL
AIC ;ACTIVATE THE CHANNEL
IIC ;INITIATE THE INTERRUPT ROUTINE
SETOM DINGON ;AND MARK THAT IT IS ON
POPJ P,
STDING: MOVEI A,.FHSLF ;GET OUR PROCESS HANDLE
MOVX B,1B<.DNGCH> ;GET THE DING CHANNEL
DIC ;DEACTIVATE THE CHANNEL
SETZM DINGON ;MARK THAT IT IS STOPPED
POPJ P,
DING: CALL DING0 ;DO THE WORK
DEBRK ;AND DEBREAK FROM INTERRUPT
DING0: SAVEAC <A,B,C,I> ;SAVE THESE ACS
MOVEI I,0 ;CHECK ALL JOBS FOR CHARACTERS
MOVE A,PTYHGH
DINGLP: SKIPE PTYCNT(I) ;ANY WAITING
JRST DINGER ;YES
ADDI I,PTYLEN ;STEP TO NEXT LINE
SOJGE A,DINGLP ;LOOP FOR ALL JOBS
JRST DINGWT ;WAIT FOR 10 SECONDS
DINGER: MOVEI A,7 ;OUTPUT A BELL
PBOUT
DINGWT: MOVE A,[XWD .FHSLF,.TIMEL] ;ELAPSED TIME FOR OUR FORK
MOVEI B,^D10000 ;TEN SECONDS TILL NEXT INTERRUPT
MOVEI C,.DNGCH ;GENERATE IT ON THE DING CHANNEL
TIMER ;...
JFCL
RET ;AND DONE
NOPTYS: ERRMES (<? No more PTY'S available>)
SKIPE NORFS ;ERROR DUE TO NO RESIDENT FREE SPACE
ERRMES (<? Insufficient system resources - no resident free space>)
;REPORT CONDITION
JRST COMLVL
BELL: NOISE (WHEN OUTPUT WAITING) ;PARSE NOISE WORDS
CONFIRM ;CONFIRM COMMAND
SKIPN NOFLAG ; TO BE NEGATED?
TDZA A,A ;NO
SETO A, ;YES
MOVEM A,BELLF ;SAVE STATE OF BELL
PUSHJ P,STDING ;TURN OFF BELL TO START WITH
PUSHJ P,PTOCHK ;GO TURN IT ON OR OFF
JRST COMLVL ;RETURN
;MAIN LOOP FOR TALKING WITH A PTY
PTYLOP: SKIPN PTYJFN(I) ;IS THERE A PTY OPENED FOR THIS JOB
PUSHJ P,PTINIT ;NO, GO INIT ONE
;**;[32] Add 1 line at PTYLOP+2 GAS 14-Apr-87
SETOM NOINT ;[32] Don't interrupt for pty output check now
MOVNI A,5 ;SET JUST ESCAPE CHAR AS INTERRUPT CHAR
MOVE B,ESCMSK ;GET ESCAPE MASK
STIW ;SO CONTROL-O IS PASSED DOWN
MOVE A,BINTTY ;SET UP BINARY CHANNEL.
MOVEM A,TERJFN
PTYLP0: MOVEI A,MAXPTC ;INIT THE PTY BUFFER COUNTER
MOVEM A,CHRCNT ;INITIALIZE THE COUNT OF CHARS SEEN
PTYLP1: MOVE A,TERJFN ;SEE IF ANY CHARACTERS ARE READY.
SIBE
JRST PTYLP3 ;YES, GO GET THE CHARACTER
SKIPE PTYCNT(I) ;ANYTHING TO TYPE OUT?
JRST PTYLP2 ;YES, GO TYPE IT
PTYLP3: PUSHJ P,TTYGET ;GET A CHARACTER FROM TTY
JRST PTYLP2 ;NONE THERE
SOS CHRCNT ;COUNT DOWN THE NUMBER OF CHARACTERS
PUSH P,A ;SAVE CHARACTER
PUSHJ P,PTYOUT ;TYPE IT OUT
POP P,A ;GET BACK CHARACTER
SKIPN RDJFN ;READING FROM A FILE?
JRST PTYLP0 ;NO, GET ALL INPUT FROM TTY FIRST
CAIE A,.CHLFD ;LF? OR
CAIN A,.CHCRT ;CR?
JRST PTYLP4 ;YES, GO READ IN ANY ECHOES
SKIPLE CHRCNT
JRST PTYLP1 ;IF PTY BUFFER NOT FULL, GO GET MORE
MOVEI A,^D20 ;BUFFER FULL, LET SUBJOB EAT THEM
DISMS
JRST PTYLP1 ;LOOP BACK
PTYLP4: MOVEI A,MAXPTC ;GET PTY BUFFER SIZE
MOVEM A,CHRCNT ;INITIALIZE CHARACTER COUNT
MOVE A,PTYJFN(I)
MOVX B,.MOPIH
MTOPR ;SEE IF TTY HUNGRY
JUMPN B,PTYLP2 ;GO DO MORE INPUT IF HUNGRY
PUSHJ P,PTYLP6 ;WAIT FOR TIME OR INTERRUPT
JRST [ PUSHJ P,PTOCK9 ;GOT INTERRUPT, CHECK OUTPUT
JRST PTYLP4]
HRRZ A,RDJFN
BIN ;PEEK AT NEXT FILE CHAR
ERJMP PTYLP4 ; IF ERROR, EOF. DON'T BKJFN
BKJFN
JFCL
CAIE B,"^" ;SOME SORT OF ESCAPE?
JRST PTYLP4 ;NO, RECHECK HUNGRY. OTHERWISE GET MORE INPUT
PTYLP2: PUSHJ P,PTOCK9 ;GO SEE IF ANYTHING TO BE ECHOED
JRST PTYLP1 ;LOOP BACK
;WAIT FOR 1 SECOND OR INTERRUPT
PTYLP6: SETOM IOWATF ;SET FLAG FOR INTERRUPT ROUTINE
SKIPE WAKEF ;INTERRUPT RECENTLY?
JRST [ SETZM IOWATF ;YES, RETURN IMMED
SETZM WAKEF ;CLEAR WAKE FLAG
POPJ P,]
MOVEI A,^D1000 ;ONE SECOND
DISMS ;NO, BLOCK
SETZM IOWATF ;CLEAR FLAG
JRST CPOPJ1
;PTY RELATED ROUTINES
;ROUTINE TO GET A PTY JFN
GETPTY: SETZM NORFS ;CLEAR FLAG
MOVN D,SYSPTY ;GET # OF PTYS IN SYSTEM
HRLZS D
GETPT1: MOVSI A,600013 ;GET PTY DESIGNATOR
HRRI A,(D) ;TRY TO GET NEXT PTY
DVCHR ;GET CHARACTERISTICS OF THIS PTY
TLNN B,(1B5) ;IS IT AVAILABLE?
JRST GETPT2 ;NO
MOVE B,A
HRROI A,DEVNAM ;TURN IT INTO AN ASCII STRING
DEVST
JRST GETPT2
MOVEI B,":" ;TERMINATED BY A COLON
IDPB B,A
MOVEI B,0
IDPB B,A ;ENDED WITH A 0 BYTE
MOVSI A,(GJ%SHT+GJ%ACC) ;SHORT FORM GTJFN, NO ACCESS BY INFERIORS
HRROI B,DEVNAM
GTJFN
JRST GETPT2 ;NOT AVAILABLE
MOVE B,[10B5+1B19+1B20] ;NOW TRY TO OPEN IT
PUSH P,A
OPENF
JRST GETPT3 ;NOT AVAILABLE
POP P,A ;GET BACK JFN
ADD D,FIRPTY ;TURN PTY UNIT # INTO TTY #
TRO D,400000 ;MAKE IT A TTY DESIGNATOR
HRRZM D,PTYTTD(I) ;STORE TTY DESIGNATOR
HRRZM A,PTYJFN(I) ;STORE JFN ALSO
MOVEI A,.PRIOU ;REFER TO THE TERMINAL WE'RE ON.
GTTYP ;ASK THE SYSTEM WHAT TYPE WE ARE.
MOVE A,PTYTTD(I) ;REFERENCE THE PTY.
STTYP ;SET THE PTY TYPE TO THE SAME AS OURSELF.
CPOPJ1: AOS (P) ;GIVE OK RETURN
CPOPJ: POPJ P,
CPOPJ2: AOS (P) ;DOUBLE SKIP RETURN
JRST CPOPJ1
GETPT3: CAIN A,MONX05 ;NO RESIDENT FREE SPACE?
SETOM NORFS ;SET FLAG
POP P,A ;GET BACK JFN
RLJFN ;AND RELEASE IT
JFCL
GETPT2: AOBJN D,GETPT1 ;TRY FOR ANOTHER PTY
POPJ P, ;NONE LEFT
;ROUTINE TO INITIALIZE A PTY LINE
PTINIT: PUSHJ P,GETPTY ;GO OPEN A PTY
JRST NOPTYS ;NONE LEFT
SETZM PTYCNT(I) ;INITIALIZE DATA BASE FOR THIS PTY
MOVEI A,(I) ;GET INDEX
IDIVI A,PTYLEN ;TURN IT INTO SUBJOB #
IMULI A,PTYBSZ ;GET START OF OUTPUT BUFFER AREA
ADDI A,PTYBUF
HRLI A,(POINT 8,0) ;SET UP BYTE POINTERS TO BUFFER
MOVEM A,PTYIBP(I)
MOVEM A,PTYGBP(I)
MOVEM A,PTYPBP(I)
ADDI A,PTYBSZ-1 ;NOW GET BYTE POINTER TO END OF BUFFER
HRLI A,(POINT 8,0,31)
MOVEM A,PTYEBP(I) ;FOR END CHECKING
HRRZ A,PTYJFN(I) ;NOW PUT PTY ON A CHANNEL
MOVEI B,(I)
IDIVI B,PTYLEN ;GET SUBJOB #
IDIVI B,PTYNCH ;MODULO CHANNEL NUMBER
ASH C,1 ;DIVIDE BY 2
HRLI B,PTYCHN(C) ;GET ACTUAL CHANNEL # FOR THIS PTY
TLO B,(1B0+1B1) ;WANT TO WAKE ON HUNGRY AND OUTPUT WAIT
HRRI B,24
MTOPR ;PUT PTY ON SOFTWARE CHANNEL
POPJ P,
;ROUTINE TO OUTPUT A CHARACTER TO A PTY
PTYOUT: PUSH P,A
SKIPN PTYJFN(I) ;IS THERE A JFN FOR THIS PTY?
PUSHJ P,PTINIT ;NO, GO GET ONE
PUSHJ P,PTYPRM ;DOES THIS LINE NEED PRIMING
JRST PTYOU0 ;YES
JRST PTYOU1 ;WAITING FOR ^C TO TAKE EFFECT
JRST PTYOU3 ;NO, GO TYPE OUT CHARACTER
PTYOU0: MOVE A,0(P) ;GET CHARACTER TO BE SENT
CAIN A,3 ;IS IT A CONTROL-C (ODD PARITY AS RECEIVED FROM TTY)
JRST PTYOU3 ;YES, JUST SEND IT DIRECTLY
HRRZ A,PTYJFN(I) ;GET JFN
MOVEI B,3 ;SEND A CONTROL-C TO PRIME LINE
BOUT
PTYOU1: MOVEI A,^D500 ; FOR CONTROL-C TO TAKE EFFECT
DISMS
PUSHJ P,PTYPRM ;SEE IF PRIMED YET?
JRST PTYOU0 ;NO, GO SEND CHARACTER ANYWAY
JRST PTYOU1 ;WAIT SOME MORE
PTYOU3: POP P,B ;ALL PRIMED, GET CHARACTER AGAIN
PTYOU4: HRRZ A,PTYJFN(I) ;GET PTY JFN
BOUT ;SEND OUT THE CHARACTER
ERJMP [PUSH P,A ;SAVE A
PUSH P,B ; AND B
MOVX A,.FHSLF ;GET THE LAST ERROR
GETER ;GET THE CODE
HRRZ B,B ;GET RID OF PROCESS HANDLE
CAIE B,IOX33 ;BUFFER FULL?
JRST [POP P,A ;NO - SOME OTHER ERROR
POP P,A
PUSHJ P,CHKLM ;AT LEFT MARGIN?
PUSHJ P,CRLF ;YES, OUTPUT CRLF
CALL TYPERR ;TELL USER ABOUT ERROR
JRST .+1] ;REJOIN THE PATH
MOVE A,PTYTTD(I);TTY DESCRIPTOR
SOBE ;IS THERE TTY OUTPUT PENDING?
PUSHJ P,PTYFIL;YES, READ IN ONE LINE
PUSH P,[PTYOU6] ;CONTINUATION ADDRESS AFTER INTERRUPT
SETOM IOWATF ;WAITING FOR INTERRUPT
MOVEI A,^D1000 ;WAIT FOR ONE SECOND
DISMS
SETZM IOWATF ;NO LONGER WAITING
POP P,A ;REMOVE UNWANTED ADDRESS
PTYOU6: SETZM WAKEF ;WAKE UP HAS OCCURRED
POP P,B ;RESTORE REGS
POP P,A
JRST PTYOU4] ;TRY AGAIN
CAIN B,"O"-100 ;CONTROL-O?
CALL PTYFLU ;YES, FLUSH INTERNAL BUFFER
CALL LOGINP ;SAVE INPUT MAYBE
EXCH B,PTYLCH(I) ;SAVE LAST CHARACTER
CAIE B,3 ;CONTROL-C AS LAST CHAR?
POPJ P, ;NO, THEN DONE
CAMN B,PTYLCH(I) ;IS THIS A CONTROL-C ALSO
CALL PTYFLU ;YES, FLUSH INTERNAL BUFFER
POPJ P,
PTYPRM: HRLZ A,PTYTTD(I) ;GET TTY #
HRR A,TTYJOB ;AND TABLE #
TLZ A,400000 ;CLEAR TTY DEV DESIGNATOR
GETAB ;GET JOB # FOR THIS TTY
JRST CPOPJ1 ;NOT LOGGED IN
JUMPGE A,CPOPJ2 ;POSITIVE MEANS ALREADY PRIMED.
TLC A,-1 ;SEE IF -1
TLCE A,-1
JRST CPOPJ1 ;-2 MEANS IN PROCESS OF GETTING JOB #
POPJ P, ;NEEDS PRIMING
;ROUTINE TO FILL A PTY BUFFER IF ANY ROOM
PTYFIL: SKIPN PTYJFN(I) ;GET JFN
POPJ P, ;NONE, RETURN
PUSHJ P,PIOFF ;TURN OFF PI SYSTEM
PTYFL0: MOVE A,PTYCNT(I) ;GET CHARACTER COUNT
CAIL A,PTYMXC ;BUFFER FULL?
JRST PTYFL1 ;YES, DONT GET ANY MORE
MOVE A,PTYTTD(I) ;GET DEVICE DESIGNATOR
SOBE ;ANY CHARACTERS WAITING
SKIPA ;YES
JRST PTYFL1 ;NO, ALL DONE
HRRZ A,PTYJFN(I) ;GET JFN AGAIN
BIN ;READ IN CHARACTER
MOVE A,B
PUSHJ P,PTYPUT ;STORE CHARACTER
JFCL
ANDI A,177
CAIN A,.CHLFD ;END OF A LINE?
JRST PTYFL1 ;YES, STOP HERE IN CASE SOMETHING ELSE TO DO
MOVE A,PTYSTS(I) ;GET CURRENT STATUS OF THIS PTY
TLNE A,PTIGNF ;OUTPUT BEING IGNORED?
JRST PTYFL0 ;YES, DONT START THE BELL
SKIPE PUSHF ;IS USER IN LOWER EXEC?
PUSHJ P,DINGGO ;YES, START DINGER
JRST PTYFL0 ;LOOP FOR REST OF CHARACTERS
PTYFL1: PUSHJ P,PION ;TURN INTERRUPTS BACK ON
POPJ P,
;ROUTINE TO STORE A CHARACTER INTO A PTY BUFFER
PTYPUT: MOVE B,PTYCNT(I) ;GET COUNT OF CHARS IN BUFFER
CAIL B,PTYMXC ;IS BUFFER FULL
POPJ P, ;YES, DONT OVERFILL IT
SKIPN ADDPAR ;ALLOW PARITY?
ANDI A,177 ;NO
IDPB A,PTYPBP(I) ;STORE CHARACTER
MOVE B,PTYPBP(I) ;GET NEW POINTER
CAMN B,PTYEBP(I) ;IS IT TIME TO WRAP AROUND?
MOVE B,PTYIBP(I) ;YES, WRAP IT AROUND TO BEGINING
MOVEM B,PTYPBP(I) ;STORE UPDATED POINTER
AOS PTYCNT(I) ;INCREMENT COUNT
JRST CPOPJ1 ;GIVE SUCCESSFUL RETURN
;ROUTINE TO GET A CHARACTER FROM THE PTY BUFFER
PTYGET: SKIPG PTYCNT(I) ;ANY CHARACTERS THERE
JRST PTYGT1 ;NO, CHECK FOR LOSSAGE
SOS PTYCNT(I) ;COUNT DOWN COUNT OF CHARS
ILDB A,PTYGBP(I) ;YES, GET THE CHARCTER
MOVE B,PTYGBP(I) ;SEE IF POINTER NEEDS WRAPPING AROUND
CAMN B,PTYEBP(I)
MOVE B,PTYIBP(I) ;YES, WRAP IT AROUND TO BEGINNING
MOVEM B,PTYGBP(I) ;STORE NEW POINTER
PUSH P,A ;SAVE CHARACTER
SKIPG PTYCNT(I) ;DECREMENT COUNT
PUSHJ P,PTYFIL ;IF NOW ZERO, GO TRY TO FILL IT
POP P,A ;GET BACK CHAR
JRST CPOPJ1 ;AND GIVE SUCCESSFUL RETURN
PTYGT1: MOVE B,PTYGBP(I) ;OUT OF SYNC?
CAMN B,PTYPBP(I)
POPJ P, ;NO
PUSH P,A ;POSSIBLY
PUSHJ P,PIOFF ;TOUCHY CODE
MOVE B,PTYPBP(I) ;GET OUTPUT POINTER
SKIPG PTYCNT(I) ;OUT OF SYNC REALLY?
MOVEM B,PTYGBP(I) ;YES, FIX THIS PROBLEM
PUSHJ P,PION ;ALL DONE
POP P,A
POPJ P,
;ROUTINE TO FLUSH OUTPUT FROM A PTY
PTYFLU: PUSH P,A
PUSHJ P,PIOFF ;TOUCHY CODE AGAIN
SETZM PTYCNT(I) ;GONE!
MOVE A,PTYPBP(I) ;SET UP BYTE POINTERS
MOVEM A,PTYGBP(I)
SETZM PTYLCH(I) ;CLEAR LAST CHAR ALSO
PUSHJ P,PION
POP P,A
POPJ P,
;PTY INTERRUPT LEVEL ROUTINES
DEFINE BLDCHN(A)<
PTYCH'A: PUSHJ P,ACSAVE
MOVEI I,A*PTYLEN
JRST PTYINT>
ZZ=0
REPEAT PTYNCH,<BLDCHN(\ZZ)
ZZ=ZZ+1>
PTYINT: SKIPE PTYJFN(I) ;IS THERE A JFN FOR THIS PTY?
PUSHJ P,PTYFIL ;YES, GO SEE IF IT HAS CHARACTERS READY
ADDI I,PTYNCH*PTYLEN ;STEP TO NEXT PTY IN THIS GROUP
MOVE A,PTYHGH ;GET HIGHEST PTY
IMULI A,PTYLEN ;CALCULATE ITS INDEX
CAMG I,A ;HAVE WE REACHED THE END YET?
JRST PTYINT ;NO, TRY THIS PTY
;**;[32] Remove 7 lines at PTYINT+7 GAS 14-Apr-87
PTYIN0: PUSHJ P,ACLOAD ;RESTORE THE ACS
SKIPE IOWATF ;IS LOWER LEVEL WAITING
POP P,RETSAV ;YES, WAKE IT UP
SETZM IOWATF ;CLEAR WAIT FLAG
SETOM WAKEF ;MARK THAT A WAKE HAPPENED
DEBRK ;DISMISS THE INTERRUPT
; CHECK FOR PTY OUTPUT AVAILABLE
;**;[33] Replace routine CHKPTO (16 lines) with 8 lines GAS 9-Aug-87
CHKPTO: SETZM TOFLAG ;[33] Initialize typeout flag
CHKPTY: SETOM NOINT ;[33] Throw away PTY timer interrupts
SETOB I,LSTHDR ;[33] Make sure a header is printed
CALL PTOCHK ;[33] (I/) Print out any PTY output
SKIPE TOFLAG ;[33] Anything typed to terminal?
JRST COMLVL ;[33] Yes, go home and get a new command
SETZM NOINT ;[33] It's ok to type output from PTYs now
JRST COMSTR ;[33] Restart command the quick way
; TEN SECOND INTERVAL CHECK FOR PTY OUTPUT
PTYOPC: PUSHJ P,ACSAVE ;SAVE ACS
SKIPE NOINT ;IS INTERRUPT UNCONDITIONALLY DISALLOWED?
JRST PTYOP1 ;YES
MOVE A,CMDSBK+.CMBFP ;NO, CHECK FIRST CHARACTER IN COMMAND
ILDB B,A ;
SKIPE B ;WAS THERE A CHARACTER?
JRST PTYOP1 ;DISALLOW PTY INTERRUPTS UNCONDITIONALLY
MOVEI A,CHKPTO ;STORE CONTINUATION ADDRESS
MOVEM A,RETSAV
PTYOP1: SETOM NOINT ;DISALLOW FURTHER INTERRUPTS UNCONDITIONALLY
MOVE A,[XWD .FHSLF,.TIMEL] ;RESET ELAPSED TIME OF CHECK
MOVEI B,^D5000 ;FIVE SECONDS TILL NEXT CHECK
MOVEI C,PTYOCN ;INTERRUPT ON CHECK CHANNEL
TIMER
ERJMP .+1 ;IGNORE ERROR
PUSHJ P,ACLOAD ;RESTORE ACS
DEBRK ;DISMISS INTERRUPT
ACSAVE: EXCH A,0(P) ;SAVE A AND GET RETURN PC IN A
PUSH P,B ;SAVE B
PUSH P,C ;SAVE C
PUSH P,D ;SAVE D
PUSH P,I ;SAVE I
JRST (A) ;RETURN TO CALLER
ACLOAD: POP P,A ;LOAD AC A WITH RETURN ADDRESS
POP P,I ;RESTORE I
POP P,D ;RESTORE D, C, AND B
POP P,C
POP P,B
EXCH A,0(P) ;RESTORE A AND PUT RETURN ON STACK
POPJ P, ;RETURN TO CALLER
;ROUTINE TO PUSH DOWN TO A LOWER EXEC
PUSHE: NOISE (EXEC LEVEL) ;PARSE NOISE WORDS
CONFIRM ;CONFIRM COMMAND
MOVSI A,(1B1) ;CREATE A LOWER FORK FOR EXEC
CFORK
JRST NOFORK
PUSH P,A ; SAVE PROCESS HANDLE
MOVSI A,(1B2!1B17) ;GET A JFN FOR THE EXEC
HRROI B,[ASCIZ/DEFAULT-EXEC:/] ;PUSH TO THE DEFAULT EXEC
GTJFN
IFNSK.
MOVSI A, (1B2!1B17)
HRROI B, [ASCIZ/SYSTEM:EXEC.EXE/] ;NO SUCH THING? TRY SYSTEM:
GTJFN
JRST NOEXEC ;FAILED AGAIN - NO EXEC FOUND
ENDIF.
HRL A,0(P)
GET ;NOW GET THE EXEC INTO THE LOWER FORK
MOVEI A,.FHSLF ;DONT ALLOW LOWER FORK TO LOG OUT
RPCAP
TXZ B,SC%LOG
SETZ C, ;NO PRIVS ENABLED
MOVE A,0(P) ;GET LOWER FORK HANDLE
EPCAP ;SET ITS CAPABILITIES
;**;[32] Replace 4 lines with 2 at PUSHE+24 GAS 14-Apr-87
MOVEI A,.FHSLF ;[32] Load this fork's handle
MOVX B,1B<TRPCHN>+1B<CTLCHN> ;[32] Disable control c and escape char
DIC
MOVNI A,5
MOVE B,SAVTIW ;PUT TERMINAL INTERRUPT WORDS BACK
STIW
MOVEI A,.PRIIN
MOVE B,SAVMOD ;SET UP ORIGINAL TTY MODE
SFMOD
STPAR
SETZM SAVMOD ;MODES MAY BE SET IN LOWER EXEC
SETO A, ;REMEMBER OUR NAME TO RESTORE IT LATER
MOVE B,[-2,,NAMES] ;GET BOTH NAMES
MOVEI C,.JISNM
GETJI
JFCL
POP P,A ;GET BACK FORK NUMBER
SETZ B,
SETOM PUSHF ;MARK THAT WE ARE PUSHED DOWN
SFRKV ;START THE EXEC
WFORK ;AND WAIT FOR IT TO HALT
SETZM PUSHF ;OUT OF EXEC
KFORK ;KILL THE LOWER FORK
PUSHE1: DMOVE A,NAMES
SETSN ;RESTORE NAME OF PROGRAM
JFCL
;**;[32] Replace 1 line with 10 at PUSHE1+3 GAS 14-Apr-87
MOVEI A,.FHSLF ;[32] Load this fork's handle
MOVX B,1B<TRPCHN>+1B<CTLCHN> ;[32] Channels to enable
AIC ;[32] Activate ^C and ^X channels
MOVEI A,.PRIIN ;[32] Load code for primary input terminal
RFMOD ;[32] Get the current mode
MOVEM B,SAVMOD ;[32] Save it for later restoration
TRO B,TT%WKF!TT%WKN!TT%WKP!TT%WKA!FLD(.TTATE,TT%DAM)!TT%LIC
SFMOD ;[32] Set to wake on all, raise lowercase,
STPAR ;[32] and translate echo only
JRST COMLVL ;[32] Get a new command
NOEXEC: ERRMES (<? No EXEC>)
POP P,A ; GET BACK PROCESS HANDLE
KFORK ; KILL IT
JFCL
JRST COMLVL
NOFORK: ERRMES (<? No lower forks available>)
JRST PUSHE1
;STORAGE AREA DEFINITIONS
PTYBSZ==10000 ;SIZE OF BUFFER FOR EACH PTY
PTYBUF==400000 ;START OF PTY BUFFERS
PTYMXC==PTYBSZ*4 ;# OF CHARACTERS IN A BUFFER
MAXPTY==30 ;MAXIMUM NUMBER OF JOBS ALLOWED
;**;[32] Add 2 lines after MAXPTY==30 GAS 14-Apr-87
CBUFSZ==400 ;[32] Command buffer size
ABUFSZ==50 ;[32] Atom buffer size
DEFINE ALC (NAM,SIZ)<
NAM=LC
LC=LC+SIZ>
LC=300000 ;LOCAL STORAGE STARTS HERE
ALC ADDPAR,1 ;ADD PARITY BIT FOR REAL TERMINAL
ALC PICNT,1 ;# OF PIOFF'S DONE
ALC PTYHGH,1 ;HIGHEST SUBJOB IN USE
ALC IOWATF,1 ;WAITING FOR AN INTERRUPT
ALC WAKEF,1 ;AN INTERRUPT HAS HAPPENED
ALC FIRPTY,1 ;TTY NUMBER OF FIRST PTY
ALC NUMPTY,1 ;# OF PTY LINES AVAILABLE FOR PTYCON
ALC SYSPTY,1 ;NUMBER OF PTY'S IN SYSTEM
ALC TTYJOB,1 ;TABLE # OF TTYJOB FOR GETAB
ALC JOBPNM,1 ;GETAB TABLE # OF JOBNAM
ALC SNAMES,1 ;GETAB TABLE # OF SNAMES
ALC JOBRT,1 ;GETAB TABLE # OF JOBRT
ALC TIMASK,1 ;TERMINAL INTERRUPT MASK
ALC TRPCHR,1 ;TRAP CHARACTER TO GET BACK TO COMLVL
ALC ESCMSK,1 ;MASK FOR STIW WHEN AT SUBJOB LEVEL
ALC CHRCNT,1 ;COUNT OF CHARACTERS IN LINE SO FAR
ALC CMDCNT,1 ;COUNT OF CHARACTERS IN COMMAND SO FAR
ALC TERJFN,1 ;HOLDS TTY JFN CURRENTLY IN USE.
ALC BINTTY,1 ;JFN OF BINARY CHANNEL FOR TTY.
ALC SAVMOD,1 ;ORIGINAL TTY MODE
ALC SAVTYP,1 ;ORIGINAL TTY TYPE
ALC SAVTIW,1 ;ORIGINAL TERMINAL INTERRUPT WORD
ALC PGMSK,4 ;PROGRAM BREAK MASK (USED FOR ONE LINER)
ALC LSTCHR,1 ;LAST CHARACTER TYPED
ALC NOFLAG,1 ;IF SET, "NO" WAS TYPED
ALC NORFS,1 ;FLAG INDICATING NO RESIDENT FREE SPACE
ALC NODEF,1 ;IF SET, DEFAULT OF "ALL" DISALLOWED
ALC IGNORF,1 ;IGNORING THIS LINE FLAG
ALC BELLF,1 ;DISABLE BELL FLAG
ALC SILNCF,1 ;-1 = TURN OF ECHOING OF GET COMMANDS
ALC LMFLAG,1 ;LEFT MARGIN FLAG
ALC REFALL,1 ;REFUSE ALL WAS TYPED
ALC IGNALL,1 ;IGNORE ALL WAS TYPED
ALC DINGON,1 ;DING FORK IS ON FLAG
ALC LSTHDR,1 ;INDEX OF LAST JOB A HEADER WAS TYPED
ALC LSTCON,1 ;LAST JOB CONNECTED TO
ALC CONDEF,1 ;DEFAULT SUBJOB STRING FOR CONNECT
ALC NXLOGC,1 ;TIME FOR NEXT LOG FILE UPDATE
ALC RDJFN,1 ;JFN OF AUTO COMMAND FILE
ALC LOGJFN,1 ;JFN OF LOGGING FILE
ALC SVIJFN,1 ;JFN OF SAVE INPUT FILE
ALC JFNIP,1 ;JFN ALREADY ACQUIRED IN PARSE
ALC CURENT,1 ;INDEX OF CURRENT JOB
ALC NUMFL,1 ;SET TO -1 WHEN A NUMBER IS ENTERED
ALC NOINT,1 ;SET TO -1 WHEN PTY INTERRUPTS ARE ALLOWED
;**;[32] Add 6 lines after ALC NOINT,1 GAS 14-Apr-87
ALC WAITF,1 ;[32] Set to -1 when in WAIT JSYS
ALC TIWATF,1 ;[32] Set to -1 when no need to go into ti wait
ALC CMDBUF,CBUFSZ ;[32] Command buffer
ALC ATMBUF,ABUFSZ ;[32] Atom buffer
ALC GTJBLK,.GJATR+1 ;[32] GTJFN block
ALC LOGBUF,200 ;[32] Log filename kept here
ALC TOFLAG,1 ;SET TO -1 WHENEVER A CHAR IS TYPED
ALC PUSHF,1 ;SET TO -1 WHEN PUSHED DOWN TO EXEC
ALC NAMES,2 ;PROGRAM NAMES
ALC RETSAV,1 ;INTERRUPT PC
ALC DEVNAM,2 ;ASCIZ DEVICE NAME OF PTY
JITBLN==.JIBAT+1 ;ROOM FOR UP TO JIBAT
ALC JITAB,JITBLN ;GETJI INFO FOR JOBS DURING "WHAT"
STRNGL==50 ;STRING LENGTH
MAXSTC==STRNGL*5-1
ALC STRING,STRNGL ;TEMP STRING
ALC LNEPTR,1 ;BYTE POINTER TO START OF TEXT
ALC LNESTR,STRNGL ;STRING FOR SINGLE LINE COMMAND
ERRSTL==20
ALC ERRSTR,ERRSTL ;BLOCK FOR ERSTR STRINGS
MAXARG==^D50 ;MAXIMUM NUMBER OF ARGUMENTS
ALC ARGS,MAXARG ;ARGUMENT BLOCK
ALC ARGCNT,1 ;NUMBRER OF ARGUMENTS
PDLEN==30
ALC PDL,PDLEN ;STACK
ALC PTYTAB,0 ;PTY STORAGE AREA, MUST BE LAST SPACE ASSIGNED
PTYTTD==0+PTYTAB ;TTY DESIGNATOR
PTYJFN==1+PTYTAB ;JFN OF PTY
PTYCNT==2+PTYTAB ;COUNT OF CHARACTERS IN BUFFER
PTYIBP==3+PTYTAB ;INITIAL BUFFER POINTER
PTYEBP==4+PTYTAB ;END OF BUFFER POINTER
PTYPBP==5+PTYTAB ;PUTTER POINTER
PTYGBP==6+PTYTAB ;GETTER POINTER
PTYNAM==7+PTYTAB ;SUBJOB NAME (5 ASCII CHARACTERS)
PTYSTS==10+PTYTAB ;STATUS OF SUBJOB
PTYLCH==12+PTYTAB ;LAST CHAR SENT TO THIS SUBJOB
PTYLEN==13
.DNGCH==1 ;DING CHANNEL FROM TIMER INTERRUPT
LEVTAB: RETSAV ;PI LEVEL TABLE
0
0
CHNTAB: 0 ;0
1,,DING ;1
1,,COMCC ;2
CTLCHN==2 ;CONTROL-C CHANNEL
1,,TYPIN ;3
TINCHN==3
1,,PTYOPC ;4
PTYOCN==4 ;PTY OUTPUT CHECK CHANNEL
1,,TRAP ;5
TRPCHN==5
0 ;6
0 ;7
0 ;8
XWD 1,PANIC ;9 PDL OVERFLOW
0 ;10
XWD 1,PANIC ;11 - DATA ERROR
0 ;12
0 ;13
0 ;14
XWD 1,PANIC ;15 - ILLEGAL INSTRUCTION
XWD 1,PANIC ;16 - ILLEGAL MEM READ
XWD 1,PANIC ;17 - ILL MEM WRITE
XWD 1,PANIC ;18 - ILL MEM EXECUTE
0 ;19
XWD 1,PANIC ;20 - MACHINE SIZE EXCEEDED
0 ;21
0 ;22
0 ;23
DEFINE CHNBLD(A)<
XWD 1,PTYCH'A
XWD 1,PTYCH'A>
ZZ==0
REPEAT PTYNCH,<CHNBLD(\ZZ)
ZZ==ZZ+1>
ONCHNS: 1B<CTLCHN>+1B<TINCHN>+1B<TRPCHN>+1B<PTYOCN>+1B9+1B11+1B15+1B16+1B17+1B18+1B20+7777 ;INTERRUPT CHANNELS
;**;[32] Delete 4 lines at ONCHNS+2 GAS 14-Apr-87
CMDSBK: CM%RAI+CM%XIF+COM0 ;COMMAND STATE BLOCK
.PRIIN,,.PRIOU
;**;[32] Change 3 lines at CMDSBK+2 GAS 14-Apr-87
PMTPR: POINT 7,[ASCIZ "PTYCON> "] ;[32] (.CMRTY) Prompt string
POINT 7,CMDBUF ;[32] (.CMBFP) Pointer to start of buffer
POINT 7,CMDBUF ;[32] (.CMPTR) Pointer to next input
5*CBUFSZ-1
0
-1,,ATMBUF
5*ABUFSZ-1
GTJBLK
SNBK: FLDBK. (.CMKEY,CM%HPP,NAMTBL,<a subjob name,>,,[BRMSK. (KEYB0.,KEYB1.,KEYB2.,KEYB3.,,<->)],NBLK)
;SUBJOB NAME BLOCK FOR COMMAND PARSE
NBLK: FLDDB. (.CMNUX,<CM%HPP+CM%SDH>,^D10,<a subjob number>)
;NUMBER BLOCK FOR COMMAND PARSE
CBLK: FLDBK. (.CMKEY,CM%HPP,CMDTBL,<a command,>,,[BRMSK. (KEYB0.,KEYB1.,KEYB2.,KEYB3.,,<->)],SNBK)
;COMMAND BLOCK FOR COMMAND PARSE
SBLK: FLDDB. (.CMUQS,,PGMSK) ;FUNCTION BLOCK FOR STRING INPUT
NAMTBL: 1,,MAXPTY+1
[ASCIZ "ALL"],,0 ;ALLOW ALL AS A SUBJOB NAME
BLOCK MAXPTY ;TABLE OF SUBJOB NAMES
;**;[32] Remove 1 line at GTJBLK+1 GAS 14-Apr-87
END <3,,ENTVEC>