Trailing-Edge
-
PDP-10 Archives
-
BB-H138F-BM_1988
-
7-sources/parlits.req
There are 10 other files named parlits.req in the archive. Click here to see a list.
!
! This module contains a number of literals required for parsing.
! These are used by many of the modules PR*.B36 and PRDATA.R36.
!
!
! COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATIO 1984, 1988 ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!
!
!+
! MACROS
!
! NOTE - The macros CMDTAB and CMDENTRY create tables for the COMND JSYS.
! If the flag CM_ABR is set, then VALUE will contain a reference to the
! entry for which this one is an abbreviation. This value is absolute and
! must be fixed when new commands are added to the table. It is of the form
! TABLE + N, where N is the number of the entry starting at one.
!
MACRO
CMDTAB (NAME)[] =
OWN NAME : VECTOR [(%LENGTH+2)/3] INITIAL (
((%LENGTH-1)/3) * %O'1000001',
CMDENTRY (%REMAINING)
); %,
CMDENTRY (NAME, FLAGS, VALUE)[] =
FLD ( %IF %NULL (FLAGS) %THEN
UPLIT ( %ASCIZ NAME)
%ELSE
UPLIT ( CM_FW + FLAGS, %ASCIZ NAME)
%FI
,FLD_LHS) + VALUE
%IF (%LENGTH GEQ 6) %THEN
,CMDENTRY (%REMAINING)
%FI %,
COMMAND (FDB) =
_COMND ( CSB, FDB; C_FLAG, C_DATA, C_FDB) %;
!+
! Length of atom buffer
!-
LITERAL
ATOM_LEN = 250;
!+
! SET command keyword identifiers
!-
LITERAL
SET_NUMB = 1, ! NUMBERS
SET_NONUM = 2, ! NONUMBERS
SET_CASE = 3, ! CASE
SET_SRCH = 4, ! SEARCH
SET_TERM = 5, ! TERMINAL
SET_VERFY = 6, ! VERIFY
SET_NOVER = 7, ! NOVERIFY
SET_TRUNC = 8, ! TRUNCATE
SET_NOTRU = 9, ! NOTRUNCATE
SET_KEY = 10, ! KEYPAD
SET_NOKEY = 11, ! NOKEYPAD
SET_WRAP = 12, ! WRAP
SET_NOWRP = 13, ! NOWRAP
SET_CURSR = 14, ! CURSOR
SET_SCRN = 15, ! SCREEN
SET_MODE = 16, ! MODE
SET_LINES = 17, ! LINES
SET_NTITY = 18, ! ENTITY
SET_QUIET = 19, ! QUIET
SET_NOQIT = 20, ! NOQUIET
SET_TAB = 21, ! TAB
SET_NOTAB = 22, ! NOTAB
SET_REPT = 23, ! REPEAT
SET_NORPT = 24, ! NOREPEAT
SET_FNF = 25, ! FNF
SET_NOFNF = 26, ! NOFNF
SET_SUMM = 27, ! SUMMARY
SET_NOSUM = 28, ! NOSUMMARY
SET_PROMPT= 29, ! PROMPT
SET_TEXT = 30, ! TEXT
SET_WORD = 31, ! WORD
SET_PARA = 32, ! PARAGRAPH
SET_HELP = 33, ! HELP
SET_AUTO = 34, ! AUTOREPEAT
SET_NOAUT = 35, ! NOAUTOREPEAT
SET_COMND = 36, ! COMMAND
SET_CTRLT = 37, ! CONTROL-T
SET_NOCTLT= 38, ! NOCONTROL-T
MAX_SET = 38;
!+
! SET CASE keywords
!-
LITERAL
SET_CNONE = 1, ! NONE
SET_CUPPR = 2, ! UPPER
SET_CLOWR = 3; ! LOWER
!+
! SET MODE keywords
!-
LITERAL
SET_MCHNG = 1, ! CHANGE
SET_MLINE = 2; ! LINES
!+
! SET SEARCH keywords
!-
LITERAL
SET_SGEN = 1, ! GENERAL
SET_SEXCT = 2, ! EXACT
SET_SEND = 3, ! END
SET_SBEG = 4, ! BEGIN
SET_SUNB = 5, ! UNBOUNDED
SET_SBND = 6, ! BOUNDED
SET_SWPS = 7, ! WPS
SET_CI = 8, ! CASE INSENSITIVE
SET_DI = 9, ! DIACRITICAL INSENSITIVE
SET_SIGN = 10, ! IGNORE
SET_SNIGN = 11, ! NOIGNORE
MAX_SET_SRCH = 11;
!+
! SET TERMINAL keywords
!-
LITERAL
SET_VT52 = 1, ! VT52
SET_VT100 = 2, ! VT100
SET_HCPY = 3, ! HARDCOPY
SET_SCRL = 4, ! SCROLL
SET_NSCRL = 5, ! NOSCROLL
SET_EDIT = 6, ! EDIT
SET_NEDIT = 7, ! NOEDIT
SET_8BIT = 8, ! EIGHTBIT
SET_N8BIT = 9, ! NOEIGHTBIT
MAX_SET_TERM = 9;
!+
! ENTITY keywords
!-
LITERAL
ENT_WORD = 1, ! WORD
ENT_SENT = 2, ! SENTENCE
ENT_PARA = 3, ! PARAGRAPH
ENT_PAGE = 4; ! PAGE
!+
! SET PROMPT keywords
!-
LITERAL
SET_PLINE = 1, ! LINE
SET_PKEY = 2, ! KEYPAD
SET_PNKEY = 3, ! NOKEYPAD
SET_PHCCH = 4, ! HCCHANGE
SET_PINS = 5, ! INSERT
SET_PNINS = 6, ! NINSERT
SET_PQRY = 7, ! QUERY
MAX_SET_PROMPT = 7;
!+
! SET TEXT keywords
!-
LITERAL
SET_TEND = 1, ! END
SET_TPAGE = 2; ! PAGE
!+
! SET WORD keywords
!-
LITERAL
SET_WDEL = 1, ! DELIMITER
SET_WNDEL = 2; ! NODELIMITER
!+
! SET PARAGRAPH keywords
!-
LITERAL
SET_PWPS = 1, ! WPS
SET_PNWPS = 2; ! NOWPS
!+
! SHOW command keywords
!-
LITERAL
SHO_BUFF = 1, ! BUFFER
SHO_CASE = 2, ! CASE
SHO_SRCH = 3, ! SEARCH
SHO_TERM = 4, ! TERMINAL
SHO_VERS = 5, ! VERSION
SHO_NTITY = 6, ! ENTITY
SHO_KEY = 7, ! KEYPAD
SHO_CURSR = 8, ! CURSOR
SHO_SCRN = 9, ! SCREEN
SHO_NUM = 10, ! NUMBERS
SHO_VRFY = 11, ! VERIFY
SHO_TRUNC = 12, ! TRUNCATE
SHO_KEYPD = 13, ! KEYPAD
SHO_WRAP = 14, ! WRAP
SHO_MODE = 15, ! MODE
SHO_LINES = 16, ! LINES
SHO_QUIET = 17, ! QUIET
SHO_TAB = 18, ! TAB
SHO_REPT = 19, ! REPEAT
SHO_FNF = 20, ! FNF
SHO_SUMM = 21, ! SUMMARY
SHO_PROMPT= 22, ! PROMPT
SHO_TEXT = 23, ! TEXT
SHO_WORD = 24, ! WORD
SHO_PARA = 25, ! PARAGRAPH
SHO_HELP = 26, ! HELP
SHO_AUTO = 27, ! AUTOREPEAT
SHO_COMND = 28, ! COMMAND
SHO_FILES = 29, ! FILES
SHO_CTRLT = 30, ! CONTROL-T
MAX_SHO = 30;
!+
! DEFINE KEY and SHOW KEY command function codes
!-
LITERAL
KEY_NUM = 1, ! Number
KEY_DEL = 2, ! DELETE
KEY_CONT = 3, ! CONTROL
KEY_FUNC = 4, ! FUNCTION
KEY_GOLD = 5; ! GOLD
!+
! The following definitions are for the various switches which may be
! appended to a command.
!-
LITERAL
SWT_QUERY = 1, ! /QUERY
SWT_BRIEF = 2, ! /BRIEF:nn
SWT_NOTYP = 3, ! /NOTYPE
SWT_SEQU = 4, ! /SEQUENCE:nn:mm
SWT_DUPL = 5, ! /DUPLICATE:nn
SWT_SAVE = 6, ! /SAVE
SWT_STAY = 7, ! /STAY
SWT_GO = 8, ! /GO
SWT_LOCN = 9, ! /LOCATION:name
SWT_STACK =10; ! /STACK:nn
!+
! The following values are used by the TRACE command:
!-
LITERAL
TRC_ON = 1, ! ON
TRC_OFF = 2, ! OFF
TRC_RESET = 3, ! RESET
TRC_LIST = 4, ! LIST
TRC_OPEN = 5, ! OPEN
TRC_CLOSE = 6; ! CLOSE
!+
! The following flags are defined in FLAGS2.
!-
LITERAL
F_SLR = 0, ! Any SLR done
F_THRU = 1, ! THRU type range
F_FOR = 2, ! FOR range
F_AND = 3, ! AND range
F_BUFFER = %O'1000000', ! BUFFER was specified
F_NEXT = %O'2000000', !
F_SLRINI = %O'4000000'; ! SLR has been inited
!+
! End of PARLITS
!-