Trailing-Edge
-
PDP-10 Archives
-
BB-H138E-BM
-
galaxy-sources/qsrmda.mac
There are 36 other files named qsrmda.mac in the archive. Click here to see a list.
TITLE QSRMDA -- Mountable Device Manager
SUBTTL Preliminaries
;
;
; COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION
; 1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH QSRMAC,GLXMAC,ORNMAC ;GET QUASAR SYMBOLS
PROLOGUE(QSRMDA) ;GENERATE NECESSARY SYMBOLS
.DIRECT FLBLST ;SQUASH LITERAL EXPANSION
MDAMAN==:3 ;Maintenance edit number
MDADEV==:14 ;Development edit number
VERSIN (MDA) ;Generate edit number
EXTERNAL DSPEDT,FSSEDT,IPCEDT
QSRED2==:DSPEDT+FSSEDT+IPCEDT+MDAEDT
SUBTTL Table of Contents
; Table of Contents for QSRMDA
;
;
; Section Page
; 1. Preliminaries. . . . . . . . . . . . . . . . . . . . . 1
; 2. Table of Contents. . . . . . . . . . . . . . . . . . . 2
; 3. Revision history . . . . . . . . . . . . . . . . . . . 3
; 4. MDA STRUCTURE INTER-RELATIONSHIPS. . . . . . . . . . . 4
; 5. QSRMDA Entry Points. . . . . . . . . . . . . . . . . . 5
; 6. Local Storage. . . . . . . . . . . . . . . . . . . . . 6
; 7. D$CLSV
; 7.1. Clear All STR Valid Status. . . . . . . . . . 7
; 8. D$CSTR
; 8.1. Check a structure for on-line . . . . . . . . 8
; 9. D$ESTR
; 9.1. Extract a STR from an FD. . . . . . . . . . . 9
; 10. D$ASTD
; 10.1. Add a structure dependency. . . . . . . . . . 11
; 11. FNDSTR
; 11.1. Find a STR entry. . . . . . . . . . . . . . . 12
; 12. Mountable Device Allocator (MDA) . . . . . . . . . . . 13
; 13. D$INIT - ROUTINE TO INITIALIZE THE MDA DATA BASE . . . 18
; 14. HOLD/RELEASE/MOUNT interface for QSRQUE. . . . . . . . 19
; 15. D$MOUNT - Process a Tape/Disk Mount Request. . . . . . 21
; 16. D$DEASSIGN - DEASSIGN/RELEASE A VOLUME SET . . . . . . 22
; 17. D$CMDR - ROUTINE TO CREATE AN ENTRY IN THE MDR QUEUE . 23
; 18. D$LOGOUT - DELETE A USER MDR'S ON LOGOUT . . . . . . . 26
; 19. D$XCH - Exchange disk units. . . . . . . . . . . . . . 27
; 20. D$DMDR - ROUTINE TO UNWIND AND DELETE AN MDR . . . . . 28
; 21. D$IDENTIFY - ROUTINE TO PROCESS THE IDENTIFY COMMAND . 29
; 22. REASSIGN - Try to give a unit to a user. . . . . . . . 32
; 23. REAS.S - Routine to Perform Volume Switch Processing . 34
; 24. D$ASGN - ROUTINE TO ASSIGN FOREIGN DEVICES UNDER MDA . 36
; 25. D$ENABLE/D$DISABLE DRIVE AVR STATUS. . . . . . . . . . 38
; 26. D$RECOGNIZE - PROCESS THE OPR RECOGNIZE COMMAND. . . . 40
; 27. D$AVR - TAPE/DISK ONLINE PROCESSOR . . . . . . . . . . 41
; 28. D$DEVSTA - PROCESS TAPE/DISK STATUS MESSAGES . . . . . 42
; 29. TAPDEV - TAPE STATUS MESSAGE PROCESSOR . . . . . . . . 43
; 30. DSKDEV - DISK STRUCTURE DEVICE STATUS MESSAGE PROCESSOR 46
; 31. SETOWN - ROUTINE TO SET UP OWNERSHIP FOR A VSL . . . . 49
; 32. MNTVSL - ROUTINE TO ATTEMPT TO MOUNT A USERS REQUESTS. 50
; 33. MNTVSR - ROUTINE TO MOUNT A VOLUME AT VOLUME SWITCH TIME 53
; 34. VSLCHK - ROUTINE TO TRY TO MOUNT A VOLUME FROM THE VSL 54
; 35. MATUNI - ROUTINE TO GIVE A VOLUME TO ANY VALID REQUESTOR 56
; 36. CVLVSL - Compare Volume with Volume Set. . . . . . . . 57
; 37. CHKOWN - ROUTINE TO CHECK IF A USER OWNS A VOLUME. . . 58
; 38. D$UNLOAD - ROUTINE TO UNLOAD A TAPE DRIVE. . . . . . . 59
; 39. D$DISMOUNT - STRUCTURE DISMOUNT PROCESSOR. . . . . . . 60
; 40. VLUNLOAD - Unload a unit and break UCB-VOL links . . . 61
; 41. D$DELETE - ROUTINE TO DELETE REQUESTS FROM THE MOUNT QUEUE 62
; 42. D$SMDA - Set tape drive un/available/ initialize . . . 66
; 43. D$VSR - VOLUME SWITCH REQUEST FROM PULSAR. . . . . . . 68
; 44. D$DVS - DISMOUNT/DEALLOCATE VOLUME SET PROCESSOR . . . 72
; 45. D$RCATALOG - RESPONSE TO CATALOG INFO REQUEST MSG PROCESSOR 74
; 46. D$GENC - ROUTINE TO GENERATE CATALOG ENTRIES FROM THE UCB'S 76
; 47. D$ACK - ROUTINE TO PROCESS MDA ACK MESSAGES. . . . . . 77
; 48. Structure mount ACK processing . . . . . . . . . . . . 78
; 49. D$RMS - Routine to process the structure removed message 79
; 50. DSMACK - ROUTINE TO PROCESS DISMOUNT ACKS FROM TAPE LABELER 80
; 51. DSMOPR - Tell OPR about a structure just dismounted. . 83
; 52. CATACK - ROUTINE TO PROCESS CATALOG ACKS FROM TAPE LABELER 84
; 53. ASLACK - ROUTINE TO PROCESS ACKS FOR ADDING STR TO A SEARCH LIST 85
; 54. RMSACK - ROUTINE TO PROCESS 'REMOVE STRUCTURE' ACKS. . 86
; 55. D$ALIAS - ROUTINE TO MOUNT A STRUCTURE WITH AN ALIAS . 87
; 56. CHKSTR - ROUTINE TO CHECK FOR STRUCTURE AVAILABILITY . 89
; 57. D$LOCK - PROCESS LOCK AND UNLOCK MESSAGES. . . . . . . 90
; 58. TIMER ROUTINES FOR LOCK AND UNLOCK . . . . . . . . . . 93
; 59. LOCNOT - Notify users (countdown) of pending locks . . 95
; 60. CLEAR LOCKS ON STRUCTURE DISMOUNT. . . . . . . . . . . 96
; 61. LNEVENT - Set up a Lock notification event . . . . . . 97
; 62. D$LCKM - ROUTINE TO PROCESS THE RESET AFTER LOCK MESSAGE 98
; 63. VSREOV - ROUTINE TO SEND END OF VOLUME MSG TO TAPE LABELER 99
; 64. DELETE - ROUTINE TO DELETE ALL NEW VOL SETS FOR A USER 100
; 65. REMOVE - ROUTINE TO DELETE A SPECIFIC VSL AND RETRY THE MOUNT 101
; 66. DELVSL - ROUTINE TO DELETE A VSL . . . . . . . . . . . 102
; 67. ALCVSL - ROUTINE TO RETURN A VSL TO THE ALLOCATION POOL 105
; 68. DELMDR - ROUTINE TO DELETE AN MDR. . . . . . . . . . . 106
; 69. DELVOL - ROUTINE TO DELETE VOL BLOCKS FROM THE VOL QUEUE 107
; 70. GETLBT - ROUTINE TO RECODE THE VOLUME LABEL TYPE . . . 108
; 71. FNDDSK - ROUTINE TO FIND A DSK VOL BLOCK USING VOLUME ID 109
; 72. CREVOL - ROUTINE TO CREATE A VOL BLOCK IN VOL QUEUE. . 110
; 73. USRACK - ROUTINE TO GENERATE AN ACK TO THE USER FOR MOUNT/ALLOC 111
; 74. ACKUSR - ROUTINE TO CREATE AN ACK AFTER THE VOL SET IS MOUNTED 112
; 75. TELOPR - ROUTINE TO NOTIFY THE OPERATOR TO MOUNT DEVICES 115
; 76. MNTOPR - ROUTINE TO NOTIFY THE OPR OF PENDING MOUNT REQUESTS 120
; 77. SETSEL - ROUTINE TO FIND THOSE UCB'S WHICH ARE FREE. . 122
; 78. USRNOT - SEND A MESSAGE TO THE USER. . . . . . . . . . 123
; 79. NSTUSR - Notify users of pending structure locks . . . 125
; 80. LBLNOT - ROUTINE TO NOTIFY LABEL PROCESS OF DEVICE REASSIGNMENT 126
; 81. LBLHDR - Set up for a message to MDA . . . . . . . . . 128
; 82. SNDREC - ROUTINE TO SEND A RECOGNIZE MSG TO THE TAPE LABELER 129
; 83. UNLOAD . . . . . . . . . . . . . . . . . . . . . . . . 129
; 84. SNDVDM - Send volume dismount message to tape labeler. 130
; 85. FNDUCB - ROUTINE TO FIND A UCB IN THE UCB CHAIN. . . . 131
; 86. GETRSN - ROUTINE TO RETURN THE FIRST AVAILABLE RESOURCE NUMBER 132
; 87. GIVRSN - Return a slot of the A matrix . . . . . . . . 133
; 88. FNTAPE - ROUTINE TO FIND A TAPE VOLUME IN THE VOL DATA BASE 134
; 89. FNDOWN - FIND ANY OWNER OF A VOLUME . . . . . . . . . 135
; 90. FNDMDR - ROUTINE TO FIND AN MDR GIVEN ITS JOB NUMBER . 136
; 91. D$CCAT - Compare catalogue entries . . . . . . . . . . 137
; 92. D$FCAT - ROUTINE TO SEARCH THE CATALOG CACHE FOR A VOL SET 140
; 93. D$TCAT - Type a catalogue entry. . . . . . . . . . . . 141
; 94. D$UCAT - Find the number users of a catalogue entry. . 143
; 95. FNDVSL - ROUTINE TO FIND A PARTICULAR VSL IN AN MDR. . 144
; 96. FNDVSN - ROUTINE TO FIND A VOLUME SET VIA THE VOL SET NAME 145
; 97. FNDLNM - ROUTINE TO FIND A USERS VSL GIVEN A LOGICAL NAME 146
; 98. VSLFND - ROUTINE TO FIND A VSL IN A USERS REQUEST. . . 147
; 99. GENVOL - ROUTINE TO CREATE A 'SCRATCH' VOLUME BLOCK. . 148
; 100. ADDVOL - ROUTINE TO ADD A VOL BLOCK DURING MOUNT PROCESSING 149
; 101. CKUVOL - CHECK FOR MULTIPLE USER REQUESTS FOR THE SAME TAPE VOL 150
; 102. MISC ROUTINES. . . . . . . . . . . . . . . . . . . . . 151
; 103. D$MDAE - ROUTINE TO NOTIFY THE OPERATOR OF ANY ERRORS. 152
; 104. DSKRSN - ROUTINE TO RETURN RESOURCE NUMBERS FOR DISK DRIVES 153
; 105. TAPRSN - ROUTINE TO RETURN RESOURCE NUMBERS FOR TAPE DRIVES 154
; 106. D$TNRS - GET A TAPE RESOURCE NUMBER. . . . . . . . . . 155
; 107. STRRSN - ROUTINE TO RETURN RESOURCE NUMBERS FOR STRUCTURES 156
; 108. D$T/SVRS - Generate resource #s for Tape/Structure volumes 158
; 109. VALMSG - ROUTINE TO VALIDATE THE MOUNT/ALLOCATE MESSAGE 159
; 110. CHKBAT - ROUTINE TO CHECK FOR BATCH REQUESTS DOING MOUNTS 160
; 111. BLDVSL - ROUTINE TO BREAK DOWN MOUNT MSG ENTRIES . . . 161
; 112. VSL DEFAULTING ROUTINES. . . . . . . . . . . . . . . . 164
; 113. MOUNT REQUEST BLOCK PROCESSOR ROUTINES . . . . . . . . 165
; 114. Count the number of requests needing a structure . . . 170
; 115. BLDSTR - ROUTINE TO PIECE TOGETHER VOL BLKS AND MAKE A STRUCTURE 171
; 116. SNDBLD - ROUTINE TO LINK THE STR VOL BLKS AND SEND STR BUILD MSG 172
; 117. ASLMSG - ROUTINE TO BUILD AN 'ADD STRUCTURE' MSG . . . 174
; 118. GETCAT - ROUTINE TO SEND A REQUEST FOR CATALOG INFO MESSAGE 176
; 119. D$BCAT - BLISS INTERFACE TO ROUTINE GETCAT . . . . . . 177
; 120. SCNVOL - ROUTINE TO FIND COMMON VOLUMES REQUESTS AND LINK THEM 178
; 121. UPDSVL - UPDATE THE STARTING VOLUME FOR A VOLUME SET . 180
; 122. D$INID - Initialization done for tape handler. . . . . 181
; 123. D$ALOC - ROUTINE TO PERFORM DEVICE ALLOCATION. . . . . 182
; 124. D$BMTX - ROUTINE TO FIND A USERS ENTRY IN THE 'B' MATRIX 186
; 125. DEADLK - BLISS INTERFACE ROUTINE FOR DEADLOCK AVOIDANCE ROUTINE 187
; 126. D$DLCK - ROUTINE TO SET UP THE DEADLOCK AVOIDANCE CHECK 188
; 127. RETA%C - ROUTINE TO RETURN RESOURCES TO THE 'A' & 'C' MATRICIES 191
; 128. RETBMA - ROUTINE TO RETURN RESOURCES TO THE 'B' MATRIX 192
; 129. ADDBMA - ROUTINE TO UPDATE A RESOURCE NUMBER FOR A USER 193
; 130. SUBCMA - ROUTINE TO RETURN RESOURCES TO THE 'C' MATRIX 195
; 131. SUBBMA - ROUTINE TO RETURN 'B' MATRIX RESOURCES. . . . 195
; 132. ADDAMA - ROUTINE TO REMOVE 'A' MATRIX RESOURCES. . . . 196
; 133. ADJAMA - ROUTINE TO ADJUST THE 'A' MATRIX. . . . . . . 197
; 134. VSLRSN - ROUTINE TO FIND A VSL'S RESOURCE NUMBERS. . . 198
; 135. SETSTK - Setup a queue for VSL, RSN pairs. . . . . . . 200
; 136. GETADD - ROUTINE TO CALC THE 'A', 'B', 'C' MATRIX ADD VALUE 201
; 137. MISC ROUTINES. . . . . . . . . . . . . . . . . . . . . 202
; 138. MDA PSEUDO PROCESS ACTION ROUTINES . . . . . . . . . . 203
; 139. D$PPRE - ROUTINE TO RESET A REAL PROCESS TO A PSEUDO PROCESS 204
; 140. D$PMDR - ROUTINE TO LOOK AT THE MDR LOOKING FOR PSEUDO PROCESSES 205
; 141. D$MODR - ROUTINE TO MODIFY A USERS ALLOCATION ON THE 'FLY' 206
; 142. SHUFFL - Routine to shuffle resources around for a requestor 207
; 143. MODALC - Routine to modify a users resource number for a request 208
; 144. D$ALCT - ROUTINE TO ALLOCATE TAPE VOLUMES FOR 'IDENTIFY' COMMAND 209
SUBTTL Revision history
COMMENT \
***** Release 4.2 -- begin maintenance edits *****
2 4.2.1591 13-Sep-84
Set flag G$CRS instead of setting an error on a GTJFN error in D$ESTR
so as to prevent CRS and RRF crashes due to a GTJFN failure.
3 4.2.1597 7-Nov-84
For mount requests, send the user an ACK before sending the mount
message to MOUNTR. This prevents a race between MOUNTR's ACK and QUASAR's
ACK.
***** Release 5.0 -- begin development edits *****
10 5.1003 7-Jan-83
Move to new development area. Add version vector. Clean up
edit organization. Update TOC.
11 5.1137 20-Apr-84
Subtotal QUASAR edit version number in QSRED2.
12 5.1162 21-Sep-84
Add table entry for SNA object type.
13 5.1182 30-Nov-84
Do not trash tape mount requests if MOUNTR is not running. Inform
the user that MOUNTR is not running and that all tape mount requests will
be trashed upon MOUNTR startup.
14 5.1210 25-Mar-85
Add the first tape volume identifier to the end of the VSL
corresponding to the tape volume set.
\ ;End of Revision History
SUBTTL MDA STRUCTURE INTER-RELATIONSHIPS
; !-----! !-----!
; ! ! ! !
; MDR ! MDR !<--------------->! MDR !
;CHAIN ! ! ! !
; !-----! !-----!
; /!\ /!\ /!\
; ! ! !
; ! ! !
; ! !---------------! !-------------------!
; ! ! !
; \!/ \!/ \!/
; !-----! !-----! !-----!
; ! ! ! ! ! !
; VSL ! VSL !<------------>! VSL !<--------------->! VSL !
;CHAIN ! ! ! ! ! !
; !-----! !-----! !-----!
; /!\ /!\ /!\ /!\ /!\ /!\
; ! ! ! ! ! !
; ! ! ! ! ! !--------------!
; ! ! ! ! ! !
; ! ! ! !-------------! !--------! !
; ! !----------! ! ! ! !
; ! ! !-----------! ! ! !
; ! ! ! !--------! ! !
; \!/ \!/ \!/ \!/ \!/ \!/
; !-----! !-----! !-----! !-----! !-----!
; ! ! ! ! ! ! ! ! ! !
; VOL ! VOL ! ! VOL ! ! VOL ! ! VOL ! ! VOL !
;CHAIN ! 1 !<------->! 2 !<------->! 3 !<------->! 4 !<------->! 5 !
; ! ! ! ! ! ! ! ! ! !
; !-----! !-----! !-----! !-----! !-----!
; /!\ /!\ /!\ /!\
; !-----------! ! ! !
; ! !-----------! ! !
; ! ! !-----------! !
; ! ! ! !-------------!
; ! ! ! !
; \!/ \!/ \!/ \!/
; !-----! !-----! !-----! !-----! !-----!
; ! ! ! ! ! ! ! ! ! !
; UCB ! MTA ! ! MTA ! ! MTB ! ! MTB ! ! MTB !
;CHAIN ! 0 !<------->! 1 !<------->! 0 !<------->! 1 !<------->! 2 !
; ! ! ! ! ! ! ! ! ! !
; !-----! !-----! !-----! !-----! !-----!
SUBTTL QSRMDA Entry Points
INTERN D$CLSV ;CLEAR ALL STR VALID STATUS BITS
INTERN D$CSTR ;CHECK TO SEE IF A STRUCTURE IS ON-LINE
INTERN D$ESTR ;EXTRACT A STRUCTURE FROM AN FD
INTERN D$ASTD ;ADD A STRUCTURE DEPENDENCY
SUBTTL Local Storage
IFN FTUUOS,<
DSKCBL: BLOCK 5 ;DSKCHR BLOCK
> ;END IFN FTUUOS
IFN FTJSYS,<
ESTR.A: BLOCK ^D16 ;-20 STRUCTURE NAME
> ;END IFN FTJSYS
SUBTTL D$CLSV -- Clear All STR Valid Status
;D$CLSV is called to clear all the STATUS-VALID indicators for all file-
; structures in the STR queue. This will cause the status to be
; re-verified upon calling D$CSTR.
;Call: No arguments
;
;T Ret: Always
D$CLSV: LOAD S1,HDRSTR##+.QHLNK,QH.PTF
;POINT TO FIRST ITEM IN STR QUEUE
MOVX S2,STSSSV ;LOAD THE STATUS-VALID BIT
CLSV.1: JUMPE S1,.RETT ;RETURN ON END OF QUEUE
ANDCAM S2,STRSTS(S1) ;CLEAR STATUS-VALID FLAG
LOAD S1,.QELNK(S1),QE.PTN ;POINT TO NEXT ITEM
JRST CLSV.1 ;AND LOOP
SUBTTL D$CSTR -- Check a structure for on-line
;D$CSTR is called with a STR queue entry to check whether or not it is
; on line.
;Call: S1/ address of an STR entry
;
;T Ret: Structure is on-line
; S1/Addr of STR queue entry
;
;F Ret: Structure is off-line
; S1/Addr of STR queue entry
D$CSTR: MOVE S2,STRSTS(S1) ;GET STRUCTURE STATUS WORD
TXNN S2,STSSSV ;IS STATUS VALID?
JRST CSTR.2 ;NO, GO ASK MONITOR
CSTR.1: TXNE S2,STSONL ;YES, IS IT ON-LINE?
$RETT ;YES, RETURN TRUE
$RETF ;NO, RETURN FALSE
TOPS10 <
CSTR.2: MOVE S2,STRNAM(S1) ;GET THE STRUCTURE NAME
MOVEM S2,DSKCBL+.DCNAM ;STORE IT IN THE DSKCHR BLOCK
MOVE S2,[5,,DSKCBL] ;POINT TO DSKCHR ARG
DSKCHR S2, ;ASK THE MONITOR FOR STATUS
MOVX S2,DC.OFL ;FAILED, LOAD OFF-LINE BIT
TXNE S2,DC.OFL!DC.NNA!DC.SAF ;OFFLINE IFF OFL OR NNA OR SAF
TDZA S2,S2 ;OFF LINE!!!
MOVX S2,STSONL ;ON LINE!!!
TXO S2,STSSSV ;SET VALID STATUS
MOVEM S2,STRSTS(S1) ;STORE THE STATUS
JRST CSTR.1 ;AND RETURN CORRECT STATE
> ;END TOPS10 CONDITIONAL
TOPS20 <
CSTR.2: PUSHJ P,.SAVE3 ;SAVE P1 THRU P3
MOVE P1,S1 ;SAVE STR ADDRESS IN P1
MOVE S1,[2,,.MSGSS] ;LEN,,FUNCTION
MOVEI S2,P2 ;ADDRESS OF ARG BLOCK
HRROI P2,STRNAM(P1) ;FIRST ARG IS POINT TO STR NAME
MSTR ;GET STRUCTURE STATUS
ERJMP CSTR.3 ;LOSE, MUST BE OFF-LINE
MOVX S2,STSONL ;LOAD THE ON-LINE BIT
TXNE P3,MS%DIS ;IS STR BEING DISMOUNTED?
CSTR.3: SETZ S2, ;YES, CLEAR ON-LINE FLAG
TXO S2,STSSSV ;SET STATUS VALID
MOVEM S2,STRSTS(P1) ;SAVE THE STRUCTURE STATUS
MOVE S1,P1 ;GET STRUCTURE ADDRESS IN S1
JRST CSTR.1 ;AND RETURN
> ;END TOPS20 CONDITIONAL
SUBTTL D$ESTR -- Extract a STR from an FD
;D$ESTR is called with an FD to extract the structure and return the
; address of an STR queue entry for it.
;Call: S1/ address of an FD
;
;T Ret: S1/ address of a STR queue entry
;
;F Ret: If an invalid structure field was in the FD (i.e. non-disk device)
IFN FTUUOS,<
D$ESTR: PUSHJ P,.SAVE1 ;SAVE P1
SKIPN S1,.FDSTR(S1) ;GET THE STRUCTURE NAME
$RETF ;IF NULL,,RETURN FALSE
MOVE P1,S1 ;AND SAVE IT IN P1
PUSHJ P,FNDSTR ;FIND THE STRUCTURE
JUMPT .RETT ;RETURN IF FOUND
MOVEM P1,DSKCBL+.DCNAM ;STORE STR NAME FOR DSKCHR
MOVE S2,[5,,DSKCBL] ;GET DSKCHR ARGS
DSKCHR S2, ;SEE IF STR IS ON-LINE
JRST [MOVE S2,P1 ;OFF-LINE, PUT STR NAME IN S2
DEVCHR S2, ;MAKE SURE ITS NOT A NON-DISK DEVICE
JUMPN S2,.RETF ;IF DEVICE EXISTS, RETURN FALSE
JRST ESTR.1] ;ELSE CONTINUE ON
LOAD S2,S2,DC.TYP ;GET ARGUMENT TYPE
CAXE S2,.DCTFS ;IF IT WAS A FILE STRUCTURE
CAMN P1,DSKCBL+.DCSNM ; OR SAME NAME AS WE ENTERED WITH ???
JRST ESTR.1 ;THEN GO ADD IT
MOVE P1,DSKCBL+.DCSNM ;ELSE, USE STR NAME RET BY DSKCHR
MOVE S1,P1 ;GET THE NAME IN S1
PUSHJ P,FNDSTR ;TRY ONCE MORE TO LOCATE IT
JUMPT .RETT ;WIN,,RETURN
ESTR.1: $SAVE H ;SAVE H
$SAVE AP ;SAVE AP
MOVEI H,HDRSTR## ;POINT TO THE CORRECT HEADER
PUSHJ P,M$GFRE## ;GET A FREE CELL
MOVEM P1,STRNAM(AP) ;SAVE THE STRUCTURE NAME
PUSHJ P,M$ELNK## ;LINK IT IN AT THE END
MOVE S1,AP ;PUT ADDRESS IN S1
$RETT ;AND RETURN
> ;END IFN FTUUOS
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
IFN FTJSYS,<
D$ESTR: PUSHJ P,.SAVET ;SAVE T REGISTERS
SETZM ESTR.A ;CLEAR DEVICE NAME HOLD AREA
HRROI S2,.FDFIL(S1) ;POINT TO THE FILESPEC
MOVX S1,GJ%OFG+GJ%SHT ;PARSE-ONLY AND SHORT GTJFN
GTJFN ;GET A JFN FOR THE FILESPEC
ERJMP [ MOVEM S1,G$CRS## ;Place error code in flag
$RETT ] ;Quit and clean up
MOVE S2,S1 ;PUT THE FILE HANDLE INTO S2
HRROI S1,ESTR.A ;PLACE TO PUT THE STRUCTURE NAME
MOVX T1,JS%DEV ;ONLY WANT THE DEVICE.
SETZ T2, ;CLEAR T2
JFNS ;GET THE STRUCTURE NAME
MOVE S1,S2 ;GET THE JFN IN S1
RLJFN ;RELEASE IT
ERJMP .+1 ;IGNORE ERRORS
MOVE S1,[ASCIZ/TTY/] ;GET AN ASCIZ 'TTY'
CAMN S1,ESTR.A ;SPECIAL CASE TTY:
$RETF ;IF TTY,,THEN RETURN FALSE
MOVE S1,[POINT 7,ESTR.A] ;POINT TO THE DEVICE NAME.
PUSHJ P,FNDSTR ;FIND THE STRUCTURE
JUMPT .RETT ;RETURN NOW IF FOUND
HRROI S1,ESTR.A ;GET THE PTR TO THE DEVICE STRING
STDEV ;CONVERT TO A DEVICE DESIGNATOR
ERJMP ESTR.1 ;IF NO SUCH DEVICE, WIN
LOAD S1,S2,DV%TYP ;GET THE DEVICE TYPE
CAIE S1,.DVDSK ;IS IT A DISK?
$RETF ;NO,,RETURN FALSE
ESTR.1: $SAVE H ;SAVE AC H
$SAVE AP ; AND AP
MOVEI H,HDRSTR## ;GET A STRUCTURE QUEUE
PUSHJ P,M$GFRE## ;GET A FREE CELL
MOVE S1,[POINT 7,ESTR.A] ;GET THE SOURCE STR BYTE PTR.
MOVE S2,[POINT 7,STRNAM(AP)] ;GET THE DESTINATION STR BYTE PTR.
ESTR.2: ILDB T1,S1 ;GET A STRUCTURE BYTE.
IDPB T1,S2 ;SAVE IT IN STR LIST.
JUMPN T1,ESTR.2 ;NOT NULL,,KEEP ON GOING.
PUSHJ P,M$ELNK## ;LINK IT IN AT THE END
MOVE S1,AP ;PUT ADDRESS IN S1
$RETT ;RETURN
> ;END IFN FTJSYS
SUBTTL D$ASTD -- Add a structure dependency
;This routine is called to place a structure into the dependency list
; for a job.
;Call: S1/ adr of STR entry
; S2/ adr of QE
;
;T Ret: always
D$ASTD: PUSHJ P,.SAVET ;SAVE THE T REGISTERS
DMOVE T1,S1 ;PUT ARGUMENTS INTO T1 AND T2
LOAD S1,.QEDIN(T2),QE.DLN ;GET DEPENDENCY LIST NUMBER
PUSHJ P,L%FIRST ;AND POSITION TO THE START OF THE LIST
JUMPF ASTD.3 ;EMPTY LIST, ADD IT ON
JRST ASTD.2 ;JUMP INTO MIDDLE OF LOOP
ASTD.1: PUSHJ P,L%NEXT ;POSITION TO THE NEXT ONE
JUMPF ASTD.3 ;NO NEXT ONE, LINK IT IN
ASTD.2: LOAD T3,.DIBDS(S2),DI.TYP ;GET DEPENDENCY TYPE
CAXE T3,.DTSTR ;STRUCTURE?
JRST ASTD.1 ;NO, GET THE NEXT DEPENDENCY
CAME T1,.DIBDT(S2) ;YES, SAME STRUCTURE?
JRST ASTD.1 ;NO, ON TO THE NEXT DEPENDENCY
JRST .RETT ;YES, ALREADY RECORDED
ASTD.3: LOAD S1,.QEDIN(T2),QE.DLN ;GET LIST NUMBER
MOVX S2,DIBSIZ ;GET LIST ENTRY SIZE
PUSHJ P,L%CENT ;CREATE AN ENTRY
MOVX S1,.DTSTR ;GET CODE FOR STRUCTURE
STORE S1,.DIBDS(S2),DI.TYP ;STORE IT
STORE T1,.DIBDT(S2) ;STORE THE STR ADDRESS
$RETT ;AND RETURN
SUBTTL FNDSTR -- Find a STR entry
;FNDSTR is called with a structure name to find the STR queue entry for it.
;
;Call: S1/ Structure Name (6bit on -10, byte-pointer on -20)
;
;T Ret: S1/ Address of STR queue entry
;
;F Ret: If not in STR queue
FNDSTR: LOAD S2,HDRSTR##+.QHLNK,QH.PTF
EXCH S1,S2 ;EXCHANGE S1 AND S2
IFN FTUUOS,<
FNDS.1: JUMPE S1,.RETF ;FAIL WHEN DONE.
CAMN S2,STRNAM(S1) ;MATCH?
$RETT ;YES, JUST RETURN
LOAD S1,.QELNK(S1),QE.PTN ;NO, POINT TO NEXT
JRST FNDS.1 ;AND LOOP
> ;END IFN FTUUOS
IFN FTJSYS,<
PUSHJ P,.SAVE4 ;SAVE P1 THRU P4
MOVE P4,S2 ;SAVE THE SOURCE STR POINTER.
FNDS.1: JUMPE S1,.RETF ;FAIL WHEN DONE.
MOVE P1,[POINT 7,STRNAM(S1)] ;POINT TO THE STRUCTURE NAME IN STR
FNDS.2: ILDB P2,P1 ;GET A STR CHARACTER
ILDB P3,S2 ;GET SOURCE CHARACTER
CAME P2,P3 ;ARE THEY THE SAME?
JRST FNDS.3 ;NO, NEXT STR
JUMPN P2,FNDS.2 ;YES, LOOP IF NOT NULL YET
$RETT ;WIN IF NULLS MATCH
FNDS.3: LOAD S1,.QELNK(S1),QE.PTN ;GET POINTER TO NEXT
MOVE S2,P4 ;RESET THE SOURCE STR POINTER.
JRST FNDS.1 ;AND LOOP
> ;END IFN FTJSYS
SUBTTL Mountable Device Allocator (MDA)
INTERN D$INIT ;MDA INITIALIZATION
INTERN D$MOUNT ;PROCESS A TAPE/DISK MOUNT REQUEST
TOPS10< INTERN D$DEASSIGN > ;DEASSIGN/RELEASE A VOLUME SET
TOPS10< INTERN D$IDENTIFY > ;IDENTIFY MESSAGE PROCESSOR
TOPS10< INTERN D$ENABLE > ;ENABLE AVR FOR A TAPE DRIVE
TOPS10< INTERN D$DISABLE > ;DISABLE AVR FOR A TAPE DRIVE
INTERN D$DMDR ;DELETE AN MDR
TOPS10< INTERN D$RECOGNIZE > ;PROCESS THE RECOGNIZE OPERATOR CMD
TOPS10< INTERN D$AVR > ;TAPE AUTOMATIC VOLUME RECOGNIZER
TOPS10< INTERN D$DEVSTA > ;PROCESS TAPE/DISK STATUS MESSAGES
TOPS10< INTERN D$UNLOAD > ;UNLOAD A TAPE DRIVE
TOPS10< INTERN D$DISMOUNT > ;STRUCTURE DISMOUNT PROCESSOR
TOPS10< INTERN D$DELETE > ;OPERATOR DELETE FOR MOUNT REQUESTS
TOPS10< INTERN D$SMDA > ;SET TAPE (UN)AVAILABLE
TOPS10< INTERN D$VSR > ;VOLUME SWITCH REQUEST FROM PULSAR
TOPS10< INTERN D$DVS > ;DISMOUNT/DEALLOCATE MESSAGE PROCESSOR
TOPS10< INTERN D$RCATALOG > ;RESPONSE TO CATALOG INFO REQUEST
TOPS10< INTERN D$ACK > ;MDA ACK MESSAGE
TOPS10< INTERN D$LOCK > ;LOCK A FILE STRUCTURE
TOPS10< INTERN D$ULOK > ;UNLOCK A FILE STRUCTURE
INTERN D$CMDR ;CREATE AN MDR FOR A USER
TOPS10< INTERN D$ALIAS > ;MOUNT WITH ALIAS PROCESSOR
TOPS10< INTERN D$TNRS > ;DEFINE A TAPE RESOURCE NUMBER
TOPS10< INTERN D$DNRS > ;DEFINE A DISK RESOURCE NUMBER
INTERN D$LOGOUT ;PROCESS A USER LOGOUT
EXTERN BELLS ;MAKE THIS REFERENCE'ABLE
EXTERN G$MSG ;MESSAGE BUFFER
EXTERN G$ACKB ;GENERIC ACK BUFFER ADDRESS
TOPS10< EXTERN DEVNTB > ;%UNKN DEVICE TRANSLATION TABLE
TOPS10< INTERN D$ASR > ;AUTOMATIC STR RECOGNITION FLAG
TOPS10< INTERN AMATRX > ;'A' MATRIX ADDRESS
TOPS10< INTERN BMATRX > ;'B' MATRIX LIST ID
TOPS10< INTERN CMATRX > ;'C' MATRIX LIST ID
TOPS10< INTERN D$INCA > ;INCRIMENT 'A' MATRIX BY 1
TOPS10< INTERN D$DECA > ;DECRIMENT 'A' MATRIX BY 1
INTERN ERRACK ;USER ERROR ACK FLAG
INTERN MDAOBJ ;MDA OBJECT BLOCK
TOPS10< INTERN D$ALOC > ;VSL ALLOCATION ROUTINE
INTERN D$PPRE ;REAL TO PSEUDO PROCESS CONVERSION
INTERN D$PPRL ;DELETE A PSEUDO PROCESS MDR
INTERN D$PMDR ;RESET PSEUDO PROCESSES ON BATCON HELLO
TOPS10< INTERN D$DLCK > ;VSL CLAIM & DEADLOCK CHECK ROUTINE
TOPS10< INTERN D$FCAT > ;REQUEST SYSTEM CATALOG DATA
TOPS10< INTERN D$CMTX > ;LOCATE A USERS 'C' MATRIX ENTRY
TOPS10< INTERN D$BMTX > ;LOCATE A USERS 'B' MATRIX ENTRY
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
MDRDSP: $BUILD %MDMAX+1
$SET(.MDINV,,.RETF) ;OFFSET 0 IS INVALID
$SET(.TMDEN,,MNTDEN) ;DENSITY BLOCK PROCESSOR
$SET(.TMDRV,,MNTDRV) ;DRIVE BLOCK PROCESSOR
$SET(.TMLT,,MNTLT) ;LABEL TYPE BLOCK PROCESSOR
$SET(.TMSET,,MNTSET) ;SET NAME BLOCK PROCESSOR
$SET(.TMRMK,,MNTRMK) ;REMARK BLOCK PROCESSOR
$SET(.TMSTV,,MNTSTV) ;STARTING VOLUME ID BLOCK PROCESSOR
$SET(.TMVOL,,MNTVOL) ;VOLUME ID BLOCK PROCESSOR
$SET(.TMVPR,,MNTPRT) ;VOL PROTECTION CODE BLOCK PROCESSOR
$SET(.TMINI,,.RETT) ;VOL INITIALIZATION BLOCK PROCESSOR
TOPS20< $SET(.SMNAM,,MNTSET) > ;STRUCTURE NAME PROCESSOR
TOPS10< $SET(.SMNAM,,.RETF) > ; (ILLEGAL ON TOPS10)
TOPS20< $SET(.SMALI,,MNTVOL) > ;ALIAS BLOCK PROCESSOR
TOPS10< $SET(.SMALI,,.RETF) > ; (ILLEGAL ON TOPS10)
$SET(.TMLNM,,MDRLNM) ;LOGICAL NAME PROCESSOR
$EOB
;DEFINE A MACRO TO PACK A BLOCK OF STORAGE INTO ITSELF STARTING AT
;THE ADDRESS CONTAINED IN 'AC'
DEFINE $PACK(AC),<
AOBJP AC,.+4 ;;CHECK THE AC,,IF POSITIVE,,SKIP
XLIST
MOVE TF,0(AC) ;;STILL NEGATIVE,,GET THE VALUE AT 0(AC)
MOVEM TF,-1(AC) ;;AND STORE IT AT ADDRESS AC-1
JRST .-3 ;;HEAD BACK FOR MORE
SETZM -1(AC) ;;WE'RE DONE,,ZERO THE LAST ENTRY
LIST>
;GENERALIZED VOLUME LABEL TYPE DEFINITIONS
%UNLBL==1 ;VOLUME IS UNLABELED
%LABEL==2 ;VOLUME IS LABELED
LABELS:: [ASCIZ/Bypass/]
[ASCIZ/ANSI/]
[ASCIZ/ANSI/]
[ASCIZ/IBM/]
[ASCIZ/IBM/]
[ASCIZ/No/]
[ASCIZ/Non-Standard/]
[ASCIZ/No/]
[ASCIZ/Cobol Sixbit/]
[ASCIZ/Cobol Ascii/]
[ASCIZ/No/]
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
DENSTY::[ASCIZ/Default/]
[ASCIZ/200/]
[ASCIZ/556/]
[ASCIZ/800/]
[ASCIZ/1600/]
[ASCIZ/6250/]
D$DEN:: 0 ;SYSTEM DEFAULT
UC.200 ;200 BPI
UC.556 ;556 BPI
UC.800 ;800 BPI
UC.1600 ;1600 BPI
UC.6250 ;6250 BPI
DENLEN==.-D$DEN
TRK:: SIXBIT/ /
SIXBIT/ 7 /
SIXBIT/ 9 /
WRTENA: [ASCIZ/Enabled/]
[ASCIZ/Locked/]
AVA: [ASCIZ/Available/]
[ASCIZ/Unavailable/]
LCKTB1: SIXBIT /LOCK/
SIXBIT /UNLOCK/
LCKTB2: SIXBIT /UNLOCK/
SIXBIT /LOCK/
RID: BLOCK 1 ;REQUEST ID SAVE AREA
D$ASR: EXP -1 ;AUTOMATIC STRUCTURE RECOGNITION FLAG
AMATRX: EXP 0 ;'A' MATRIX ADDRESS INITIALLY NONE
BMATRX: 0,,0 ;'B' MATRIX LIST ID
CMATRX: 0,,0 ;'C' MATRIX LIST ID
STRVOL: BLOCK 1 ;STARTING VOLUME SAVE AREA
VOLNBR: BLOCK 1 ;VOLUME COUNT IN A VOLUME SET
ERRACK: BLOCK 1 ;ACK BEING SENT IS A FATAL ACK
PROCNT: 0,,0 ;'B' & 'C' MATRIX PROCESS COUNTS
MDAOBJ: .OTMNT ;MDA OBJECT BLOCK - TYPE .OTMNT
0,,0 ;SPACE FOR SIXBIT UNIT NAME
0,,0 ;NO NODE NAME
VOLNAM: BLOCK 2 ;PLACE FOR AN ASCIZ STR NAME
WRTLCK: BLOCK 1 ;WRITE-LOCKED FLAG FOR STR MOUNTS
MDRQUE:: EXP -1 ;TAPE MOUNT QUEUE LIST ID
UCBQUE:: 0,,0 ;UCB QUEUE
VSLQUE:: 0,,0 ;VOLUME SET LIST QUEUE
VOLQUE:: 0,,0 ;VOLUME LIST QUEUE
CATQUE:: 0,,0 ;CATALOG CACHE ID
CATOLD: BLOCK 1 ;OLD CATALOG ENTRY ADDRESS
CATNEW: BLOCK 1 ;NEW CATALOG ENTRY ADDRESS
CATOBJ: BLOCK OBJ.SZ ;OBJECT BLOCK FOR WTO MSG
CATTXT: BLOCK <CATSIZ==100> ;TEXT BLOCK
CATCNT: BLOCK 1 ;CHARACTER COUNT
CATPTR: BLOCK 1 ;BYTE POINTER
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
TOPS10<
;This structure defines the initial 'A' matrix for Resource Allocation
; Call: X(Res-Name,Res-Type,Kontroler type,Unit type,Track,Density)
MAXNCH==^D39 ;MAX # OF CHARS IN A RESOURCE NAME
AMNMLN==<MAXNCH+1+4>/5 ;WORDS REQ'D TO STORE ONE OF THESE
DEFINE GENRES,<XLIST
X (RD10,%DISK,.DCCFH,.DCUFD,0,UC.SHR)
X (RS04,%DISK,.DCCFS,.DCUS4,0,UC.SHR)
X (RP04,%DISK,.DCCRP,.DCUR4,0,UC.SHR)
X (RM10B,%DISK,.DCCFH,.DCUFM,0,UC.SHR)
X (RP02,%DISK,.DCCDP,.DCUD2,0,UC.SHR)
X (RP06,%DISK,.DCCRP,.DCUR6,0,UC.SHR)
X (RP03,%DISK,.DCCDP,.DCUD3,0,UC.SHR)
X (RM03,%DISK,.DCCRP,.DCUR3,0,UC.SHR)
X (RP07,%DISK,.DCCRP,.DCUR7,0,UC.SHR)
X (RP20,%DISK,.DCCRN,.DCUN0,0,UC.SHR)
X (<7 TK 200/556/800>,%TAPE,0,0,%TRK7,UC.200+UC.556+UC.800)
X (<9 TK 800/1600>,%TAPE,0,0,%TRK9,UC.800+UC.1600)
X (<9 TK 1600/6250>,%TAPE,0,0,%TRK9,UC.1600+UC.6250)
X (<9 TK 200/556/800>,%TAPE,0,0,%TRK9,UC.200+UC.556+UC.800)
LIST>
DEFINE X(TYP7,TYPE,KON,UNIT,TRK,DEN),<XLIST
$BUILD AMALEN
$SET (.AMNAM,AM.NAM,[ASCIZ^TYP7^])
$SET (.AMNAM,AM.PRM,1)
$SET (.AMNAM,AM.USE,1)
$SET (.AMSTA,,<FLD(KON,UC.KTP)+FLD(UNIT,UC.UTP)+FLD(TRK,UC.TRK)+FLD(TYPE,UC.DVT)+DEN>)
$EOB
LIST>
DEFINE BLDPRM,<XLIST
GENRES ;BUILD THE PERMANENT 'A' MATRIX
LIST >
;Generate the permanent A-matrix - Build block 0, the header
AMATPM: $BUILD AMALEN
$SET (.AMHDR,AM.CNT,RESCNT) ;HIGHEST IN USE
$SET (.AMHDR,AM.MCN,RESCNT) ;BIGGEST MATRIX HAS SPACE FOR
$SET (.AMHDR,AM.LEN,RESLEN) ;LENGTH OF THIS BLOCK
$EOB
BLDPRM ;BUILD THE PERMANENT 'A' MATRIX
RESLEN==.-AMATPM ;THE LENGTH OF THE PERMANENT A MATRIX
RESCNT==<RESLEN/AMALEN>-1 ;THE NUMBER OF BLOCKS IN USE
> ;END TOPS10 CONDITIONAL
TMPVSL: BLOCK VSLLEN ;MAKE SURE WE AT LEAST HAVE ENOUGH SPACE
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
DEMO:: ITEXT (<User: ^W6/.MRNAM(AP)/^W/.MRNAM+1(AP)/ ^U/.MRUSR(AP)/ job# ^D/.MRJOB(AP),MD.PJB/>)
DEFINE X(CODE,STRING),<XLIST
EXP [ASCIZ/STRING/]
LIST >
MDAERS: MDAERR ;GENERATE THE ERROR STRINGS
SUBTTL D$INIT - ROUTINE TO INITIALIZE THE MDA DATA BASE
D$INIT: SKIPN G$MDA## ;MDA SUPPORT HERE ???
$RETT ;NO,,RETURN
PUSHJ P,L%CLST ;CREATE A LIST FOR THE MDR
MOVEM S1,MDRQUE ;SAVE THE ID
PUSHJ P,L%CLST ;CREATE A LIST FOR THE VSL SET CHAIN
MOVEM S1,VSLQUE ;SAVE THE ID
PUSHJ P,L%CLST ;CREATE A LIST FOR THE VOLUME LIST
MOVEM S1,VOLQUE ;SAVE THE ID
TOPS20< $RETT > ;RETURN NOW ON THE -20
TOPS10< ;...BUT ON THE -10...
;NOTE:::: The UCB chain will be built by I$INIT (QSRT10)
MOVEI S1,MDADAE ;GET DEADLOCK FLAG
MOVEM S1,G$DEAD## ;AND SET IT
PUSHJ P,L%CLST ;CREATE A LIST FOR THE CATALOG CACHE
MOVEM S1,CATQUE ;SAVE THE ID
PUSHJ P,L%CLST ;CREATE A LIST FOR THE 'B' MATRIX
MOVEM S1,BMATRX ;SAVE IT
PUSHJ P,L%CLST ;CREATE A LIST FOR THE 'C' MATRIX
MOVEM S1,CMATRX ;SAVE IT
MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%FIRST ;POSITION TO THE FIRST UCB
JUMPT INIT.2 ;IF FOUND,,CONTINUE
$STOP (NUE,Null UCB chain encountered) ;NO,,DEEP TROUBLE
INIT.1: MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT UCB ENTRY
INIT.2: JUMPF INIT.4 ;NO MORE,,SETUP PERM STRS
MOVE T1,S2 ;SAVE THE UCB ADDRESS IN T1
LOAD S1,.UCBST(T1),UC.AVA ;GET AVAILABLE BIT
JUMPE S1,INIT.1 ;NOT AVAILABLE,,SKIP THIS
MOVE S1,T1 ;GET THE UCB ADDRESS IN S1
PUSHJ P,D$INCA ;INCRIMENT THE 'A' MATRIX
JRST INIT.1 ;AND GO TRY THE NEXT UCB
INIT.4: PUSHJ P,I$ISTR## ;INITIALIZE SYSTEM STRUCTURE LIST
PUSHJ P,I$PERM## ;SETUP 'PERMENANT STRUCTURES'
MOVN P1,G$MAXJ## ;GET NUMBER OF JOBS IN THE SYSTEM
HRLZS P1 ;GET -NUMBER,,0
AOS P1 ;START WITH JOB NUMBER 1
MOVEI S1,0(P1) ;GET A JOB NUMBER
PUSHJ P,I$SSRL## ;CREATE THE GUYS MDR ENTRY
AOBJN P1,.-2 ;CONTINUE FRO ALL JOBS
PJRST MNTOPR ;RETURN,,SETTING UP MOUNTS PENDING EVENT
> ;END TOPS10 CONDITIONAL
SUBTTL HOLD/RELEASE/MOUNT interface for QSRQUE
; Here while processing a HOLD or RELEASE command to notify the
; operator of mount queue changes.
; Call: MOVE S1, QE address
; MOVE S2, 0 for HOLD or 1 for RELEASE
; PUSHJ P,D$HOLD/D$RELE
;
D$HOLD::
TOPS20 <POPJ P,> ;CAN'T DO THIS HERE
TOPS10 < ;TOPS-10 ONLY
SKIPN .QEMDR(S1) ;HAVE AN MDR?
POPJ P, ;NO
$SAVE <P1,P2,P3,P4> ;SAVE SOME ACS
$SAVE <T1,T2> ;SAVE MORE ACS
$SAVE <AP> ;SAVE AP
MOVE AP,.QEMDR(S1) ;GET THE MDR ADDRESS
MOVE T1,S2 ;REMEMBER WHAT WE'RE DOING
LOAD P1,.MRCNT(AP),MR.CNT ;GET VSL COUNT FOR THIS MDR
MOVNS P1 ;NEGATE IT
HRLI P1,.MRVSL(AP) ;GET ADDRESS OF FIRST VSL
MOVSS P1 ;MAKE AN AOBJN POINTER
HOLD.1: HRRZ P2,(P1) ;GET A VSL ADDRESS
MOVX S1,VS.ALC!VS.ABO ;GET SOME BITS
TDNE S1,.VSFLG(P2) ;ALLOCATED OR ABORTED?
JRST HOLD.4 ;YES - IGNORE THIS VSL
LOAD P3,.VSCVL(P2),VS.CNT ;GET NUMBER OF VOLS IN THE VSN
MOVNS P3 ;NEGATE IT
HRLI P3,.VSVOL(P2) ;GET ADDRESS OF FIRST VOL
MOVSS P3 ;MAKE AN AOBJN POINTER
HOLD.2: HRRZ P4,(P3) ;GET A VOL ADDRESS
HRRZ S1,.VLVSL(P4) ;GET A VSL BACK POINTER
MOVX S2,VL.ASN ;GET THE VOL ASSIGNED BIT
CAMN S1,P2 ;SAME VSL?
TDNE S2,.VLVSL(P4) ;AND VOL ASSIGNED?
JRST HOLD.3 ;TRY ANOTHER VOL
LOAD S1,.VSRID(P2),VS.RID ;GET MOUNT REQUEST ID
MOVE S2,.MRQEA(AP) ;GET QE ADDRESS
MOVE S2,.QERID(S2) ;GET QE REQUEST ID
LOAD T2,.MRFLG(AP),MR.QUE ;GET OBJECT TYPE
$WTO (<Mount request #^D/S1/>,<^I/HOLD.5/>,,<$WTFLG(WT.SJI)>)
JUMPE T1,HOLD.3 ;ONWARD IF HOLDING THIS JOB
MOVX S1,VS.OPR ;GET A BIT
IORM S1,.VSFLG(P2) ;AND WAKE UP THE SLEEPING OPERATOR
HOLD.3: AOBJN P3,HOLD.2 ;LOOP THROUGH ALL VOL BLOCKS
HOLD.4: AOBJN P1,HOLD.1 ;LOOP THROUGH ALL VSL BLOCKS
POPJ P, ;RETURN
HOLD.5: ITEXT (<^T/@HOLD.6(T1)/ the queue due to ^T/@MNTTAB(T2)/
request #^D/S2/ being ^T/@HOLD.7(T1)/>)
HOLD.6: [ASCIZ |Removed from|] ;HOLD
[ASCIZ |Added to|] ;RELEASE
HOLD.7: [ASCIZ |held|] ;HOLD
[ASCIZ |released|] ;RELEASE
; Translation table of object type to text for mount displays
;
MNTTAB: [0,,0] ;INVALID
[0,,0] ;.OTRDR (READER QUEUE)
[0,,0] ;.OTNET (NETWORK QUEUE)
[ASCIZ |Print|] ;.OTLPT (PRINTER QUEUE)
[ASCIZ |Batch|] ;.OTBAT (BATCH QUEUE)
[ASCIZ |Card punch|] ;.OTCDP (CARD PUNCH QUEUE)
[ASCIZ |Paper tape punch|] ;.OTPTP (PAPER TAPE PUNCH QUEUE)
[ASCIZ |Plotter|] ;.OTPLT (PLOTTER QUEUE)
[0,,0] ;.OTJOB
[0,,0] ;.OTTRM
[0,,0] ;.OTOPR
[0,,0] ;.OTIBM
[0,,0] ;.OTMNT
[ASCIZ |File transfer|] ;.OTFTS (FILE TRANSFER QUEUE)
[ASCIZ |Interpreter|] ;.OTBIN (SPRINT)
[ASCIZ |Retrieval|] ;.OTRET
[0,,0] ;.OTNOT
[0,,0] ;.OTDBM
[0,,0] ;.OTFAL
[0,,0] ;.OTSNA
> ;END TOPS-10 CONDITIONAL
SUBTTL D$MOUNT - Process a Tape/Disk Mount Request
;CALL: M/ The Mount Message Address
; S1/ The QE address if entry point D$MNTP
;
;RET: An Ack to the user (If he wants one)
D$MNTP:: SKIPA ;'MNTP' ENTRY POINT (CALLED FROM I$BMDR)
D$MOUNT: SETZM S1 ;'MOUNT' ENTRY POINT
JUMPN S1,.+3 ;IF 'MNTP' ENTRY,,SKIP G$QUEUE CHECK
SKIPE G$QUEUE## ;ARE CREATES VALID ???
JRST E$OHR## ;NO,,RETURN AN ERROR !!!
SKIPN G$MDA## ;IS MDA SUPPORTED ???
JRST E$MDA## ;NO,,RETURN AN ERROR !!!
PUSHJ P,.SAVE1 ;SAVE P1 FOR A SECOND
MOVE P1,S1 ;SAVE THE QE ADDRESS IF THERE IS ONE
PUSHJ P,D$CMDR ;GO CREATE THE MDR ENTRY
JUMPF .RETT ;RETURN IF AN ERROR OCCURED
JUMPE P1,.+3 ;NO QE,,SKIP NEXT 2 INSTRUCTIONS
MOVEM AP,.QEMDR(P1) ;YES,,SAVE THE MDR ADDRESS
MOVEM P1,.MRQEA(AP) ;SAVE THE QE ADDRESS IF ANY
MOVE P1,S1 ;SAVE THE VSL ADDRESS (FROM D$CMDR)
MOVE S2,G$ACK## ;GET THE ACK REQUEST CODE
STORE S2,.MRFLG(AP),MR.ACK ;SAVE IT
SETZM G$ACK## ;CLEAR THE ACK REQUEST
PUSHJ P,I$MNTR## ;SEND THE MESSAGE TO MOUNTR (TOPS20 ONL
TOPS20< $RETT ;And return
>
TOPS10< MOVE S1,P1 ;GET THE VSL ADDRESS
PUSHJ P,D$ALOC ;TRY TO PERFORM ALLOCATION
JUMPF [JUMPL S1,.RETT ;ALLOCATION POSTPONED,,JUST RETURN
MOVE S1,P1 ;NO GOOD,,GET THE VSL ADDRESS BACK
PJRST DELETE ] ;RETURN,,DELETING VOL SETS JUST ADDED
MOVE S1,P1 ;GET THE VSL ADDRESS
PUSHJ P,MNTVSL ;TRY TO MOUNT IT
$RETT ;RETURN
>
SUBTTL D$DEASSIGN - DEASSIGN/RELEASE A VOLUME SET
;CALL: M / The Deassign Message Address
;
;RET: True Always
TOPS10 <
D$DEAS: PUSHJ P,.SAVE3 ;SAVE P1 & P2 FOR A MINUTE
MOVE S1,.TDDEV(M) ;GET THE RELEASED DEVICE NAME
PUSHJ P,UCBLOC ;FIND THE DEVICE IN THE UCB CHAIN
JUMPT DEAS.1 ;CONTINUE IF WE KNOW ABOUT THIS DEVICE
MOVE S1,.TDDEV(M) ;PICK UP THE DEVICE NAME
PUSHJ P,I$MDAC## ;CLEAR THE MDA BIT
$WTO (<Released>,,MDAOBJ) ;TELL THE OPERATOR
$RETT ;RETURN
DEAS.1: MOVE P1,S1 ;SAVE THE UCB ADDRESS IN P1
SKIPN P2,.UCBVS(P1) ;DOES THE UCB POINT TO A VSL ???
$RETT ;NO OWNER,,STRANGE !!!
MOVE AP,.VSMDR(P2) ;GET THE MDR ADDRESS
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE OWNERS JOB NUMBER
CAME S1,.TDJBN(M) ;THESE MUST MATCH !!!
$STOP(IOS,Invalid Owner Specified in Reassign Message) ;NO,,UH OH !!
$WTO (<Released>,<^I/DEMO/>,MDAOBJ) ;TELL OPR WHATS GOING ON
MOVE S1,P2 ;GET THE VSL ADDRESS IN S1
MOVE S2,.TDDVT(M) ;GET THE DEVICE TYPE
CAIN S2,.TYDTA ;A DECTAPE?
JRST DEAS.2 ;YES
CAIE S2,.TYMTA ;A MAGTAPE?
JRST DEAS.3 ;NOPE - A RANDOM DEVICE
JRST DEAS.4 ;YES
; Here for DECtape deassign
;
DEAS.2: PUSHJ P,I$DDSM## ;YES,,ACCOUNT FOR ITS USAGE
MOVE S1,.TDDEV(M) ;PICK UP THE DEVICE NAME
PUSHJ P,I$MDAC## ;CLEAR THE MDA BIT
; Here for random device deassign
;
DEAS.3: MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
MOVE S2,.VSUCB(P2) ;GET THE UCB ADDRESS
PUSHJ P,L%APOS ;POSITION TO THAT ENTRY
PUSHJ P,L%DENT ;DELETE THAT ENTRY
SETZM .VSUCB(P2) ;ZAP THAT POINTER
MOVE S1,P2 ;GET THE VSL ADDRESS
PUSHJ P,DELVSL ;DELETE IT
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE USERS REQUEST COUNT
JUMPE S1,DELMDR ;NOTHING LEFT,,DELETE THE MDR
$RETT ;AND EXIT
; Here for magtape deassign
;
DEAS.4: PUSHJ P,I$TDSM## ;PERFORM TAPE ACCOUNTING
MOVE S1,P2 ;GET THE VSL ADDRESS IN S1
PUSHJ P,ALCVSL ;RETURN THIS VSL TO THE ALLOCATION POOL
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE USERS REQUEST COUNT
JUMPE S1,DELMDR ;NOTHING LEFT,,DELETE THE MDR
$RETT ;AND EXIT
>
SUBTTL D$CMDR - ROUTINE TO CREATE AN ENTRY IN THE MDR QUEUE
;CALL: M/The MOUNT Message Address
;
;RET: AP/ The MDR address
; S1/ The VSL address
D$CMDR: PUSHJ P,VALMSG ;GO VALIDATE SOME OF THE MESSAGE
JUMPF .RETF ;NO GOOD,,THATS AN ERROR
PUSHJ P,.SAVE4 ;SAVE 4 P AC'S
MOVE S1,REQIDN## ;SAVE THE LAST VALID REQUEST ID
MOVEM S1,RID ; FOR A FEW MINUTES
LOAD S1,G$PRVS##,MD.PJB ;GET THE SENDERS JOB NUMBER
PUSHJ P,FNDMDR ;FIND THIS USERS MDR
JUMPF CMDR.1 ;NOT THERE,,CREATE ONE
;Here to check to see if there is enough room for the next VSL
;and if not, create a new MDR
MOVE S1,MDRQUE ;GET THE MDR QUEUE ID
PUSHJ P,L%SIZE ;GET HIS CURRENT MDR LENGTH
MOVE P4,S2 ;SAVE THE MDR LENGTH
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT
SUBI S2,MDRLEN(S1) ;DELETE BASE MDR LEN+VSL CNT FROM TOTAL
SUB S2,.MMARC(M) ;SUBTRACT NEW REQUEST NUMBER
JUMPGE S2,CMDR.2 ;NEW REQUEST WILL FIT INTO OLD MDR !!
MOVNS S2 ;GET POSITIVE DIFFERENCE
ADD S2,P4 ;ADD IT TO THE OLD MDR LENGTH
MOVE S1,MDRQUE ;GET THE MDR QUEUE ID
PUSHJ P,L%CENT ;CREATE A NEW MDR FOR THE USER
MOVE P3,S2 ;SAVE THE NEW MDR ADDRESS
HRL P3,AP ;CREATE SOURCE,,DEST BLT AC
ADDI P4,-1(S2) ;GET BLT END ADDRESS
BLT P3,0(P4) ;COPY OLD MDR TO NEW MDR
EXCH AP,S2 ;EXCHANGE OLD AND NEW MDR ADDRESSES
MOVE S1,MDRQUE ;GET THE MDR QUEUE ID
PUSHJ P,L%APOS ;POSITION TO THE OLD MDR
PUSHJ P,L%DENT ; AND DELETE IT
SKIPE S1,.MRQEA(AP) ;POINTING TO A QE ???
MOVEM AP,.QEMDR(S1) ;YES,,RESET POINTER !
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT (CURRENT)
MOVNS S1 ;NEGATE IT
MOVSS S1 ;MOVE RIGHT TO LEFT
HRRI S1,.MRVSL(AP) ;CREATE AOBJN AC FOR VSL ADDRESS LIST
CMDR.0: MOVE S2,0(S1) ;GET A VSL ADDRESS
MOVEM AP,.VSMDR(S2) ;RESET MDR POINTER FOR NEW MDR
AOBJN S1,CMDR.0 ;RESET ALL VSL MDR POINTERS
JRST CMDR.2 ;AND CONTINUE PROCESSING
;CONTINUED ON THE NEXT PAGE
;Here to create a new MDR for a user who does not already have one
CMDR.1: MOVE S1,MDRQUE ;GET THE QUEUE ID
PUSHJ P,L%LAST ;POSITION TO THE LAST ENTRY
MOVE S1,MDRQUE ;GET THE QUEUE ID
SKIPG S2,.MMARC(M) ;CHECK AND LOAD THE VOLUME SET COUNT
PJRST E$MRP## ;NONE,,THEN 'MOUNT/WAIT' W/NONE PENDING
ADDI S2,MDRLEN-1 ;ADD MDR LENGTH-1
PUSHJ P,L%CENT ;GO CREATE A QUEUE ENTRY
MOVE AP,S2 ;GET THE ENTRY ADDRESS
MOVE S1,AP ;GET THE MDR ADDRESS IN S1
PUSHJ P,I$DFMR## ;FILL IN SYSTEM DEPENDENT DATA
CMDR.2: MOVE S1,G$SID## ;GET THE OWNERS ID
MOVEM S1,.MRUSR(AP) ;SAVE IT IN THE QUEUE
MOVE S1,G$SND## ;GET THE SENDERS PID
MOVEM S1,.MRPID(AP) ;SAVE IT
MOVE S1,.MSCOD(M) ;GET THE SENDERS ACK CODE
MOVEM S1,.MRACK(AP) ;SAVE IT
MOVE S1,G$PRVS## ;GET THE SENDERS CAPABILITIES
MOVEM S1,.MRJOB(AP) ;SAVE IT IN THE QUEUE
LOAD S1,.MMFLG(M),MM.WAT ;GET USER REQUEST FOR WAITING
STORE S1,.MRFLG(AP),MR.WAT ;SAVE IN MDR
LOAD S1,.MMFLG(M),MM.NOT ;AND GET USER NOTIFY BIT
STORE S1,.MRFLG(AP),MR.NOT ;AND SAVE THAT IN MDR
LOAD S1,.MMFLG(M),MM.GFR ;GET CREATED BY [SYSTEM]GOPHER BIT
LOAD S2,.MSTYP(M),MS.TYP ;GET THE MESSAGE TYPE
CAXE S2,.QIFNC ;IS THIS AN INTERNAL CALL ???
SETZM S1 ;NO,,CLEAR [SYSTEM]GOPHER BIT
STORE S1,.MRFLG(AP),MR.GFR ;SET/CLEAR THE BIT
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE REQUESTING JOB NUMBER
TXNE S1,BA%JOB ;IS THIS A BATCH REQUEST ???
JRST CMDR.3 ;YES,,SKIP THIS
MOVX S2,JI.JLT ;CODE TO GET LOGIN TIME
$CALL I%JINF ;ASK THE LIBRARY
MOVEM S2,.MRLOG(AP) ;SAVE IN MDR FOR NOTIFY
CMDR.3: INCR .MRCNT(AP),MR.LNK ;GEN A NEW VSL LINK CODE
MOVEI P2,.MMHSZ(M) ;POINT TO THE FIRST MOUNT ENTRY
SKIPN P4,.MMARC(M) ;GET THE VOLUME SET COUNT IN P4
JRST CMDR.6 ;NONE,,THEN .MOUNT/WAIT...
CMDR.4: MOVE S1,P2 ;GET THE MOUNT MSG ENTRY ADDRESS IN S1
PUSHJ P,BLDVSL ;GO BUILD THE VOLUME SET LIST
JUMPF CMDR.5 ;CHK BLDVSL - NO GOOD,,DELETE THIS MDR
MOVE P1,S1 ;SAVE THE VSL ADDRESS
LOAD S1,.MEHDR(P2),AR.LEN ;GET THIS ENTRIES LENGTH
ADDI P2,0(S1) ;POINT TO THE NEXT ENTRY
SOJG P4,CMDR.4 ;CONTINUE THROUGH ALL VOLUME SETS
MOVE S1,P1 ;RETURN THE LAST VSL ADDRESS
$RETT ;RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
CMDR.5: PUSHJ P,DELETE ;DELETE THE VOL SETS JUST ADDED
MOVE S1,RID ;GET THE LAST VALID REQUEST ID
MOVEM S1,REQIDN## ;SAVE IT
SKIPN G$ERR## ;DID WE ALREADY SEE AN ERROR?
PJRST E$IMM## ;NO, RETURN THROUGH 'INVALID MOUNT MSG'
$RETF ;YES, BUBBLE IT UP!
;Here if MOUNT/WAIT<CRLF> was typed
CMDR.6: LOAD P1,.MRCNT(AP),MR.LNK ;GET CURRENT LINK CODE
LOAD P2,.MRCNT(AP),MR.CNT ;GET REQUEST COUNT
MOVNS P2 ;NEGATE THE REQUEST COUNT
MOVSS P2 ;GET COUNT IN LEFT HALF
HRRI P2,.MRVSL(AP) ;CREATE ABOJN AC
SETZM P3 ;SET MOUNT PENDING FLAG
CMDR.7: MOVE S1,0(P2) ;PICK UP A VSL ADDRESS
LOAD S2,.VSFLG(S1),VS.ALC ;IS IT JUST ALLOCATED ???
JUMPN S2,CMDR.8 ;YES,,TRY NEXT
PUSHJ P,CHKOWN ;CHECK FOR OWNERSHIP
JUMPT [MOVX S2,VL.ASK ;OWNED,,CHECK TO SEE IF 'ASK' IS SET
TDNN S2,0(S1) ;IS IT REALLY MOUNTED ???
JRST CMDR.8 ;YES,,TRY NEXT REQUEST
JRST .+1 ] ;NO,,ADD'EM UP
MOVE P3,0(P2) ;SAVE THE VSL ADDRESS
STORE P1,.VSRID(P3),VS.LNK ;RESET LINK CODE
CMDR.8: AOBJN P2,CMDR.7 ;GET NEXT REQUEST
JUMPE P3,E$MRP## ;NONE WAITING,,TELL THE USER
MOVE S1,P3 ;RETURN THE LAST VSL ADDRESS
$RETT ;LETERRIP
SUBTTL D$LOGOUT - DELETE A USER MDR'S ON LOGOUT
;CALL: S1/ The User Job Number
;
;RET: True Always
TOPS10 <
D$LOGO: SKIPN G$MDA## ;MUST BE RUNNING WITH MDA ENABLED
$RETT ;NO,,RETURN
$SAVE <AP> ;SAVE AP FOR A SECOND
PUSHJ P,FNDMDR ;FIND THIS USERS MDR
JUMPF .RETT ;NO MORE,,RETURN
PUSHJ P,D$DMDR ;DELETE THIS MDR
$RETT ;RETURN
>
TOPS20<
D$LOGO: $RETT > ;JUST RETURN ON THE -20
SUBTTL D$XCH - Exchange disk units
; Here when the monitor sends us an exchange message (.IPCXC). This can
; happen when an operator issues the priv'ed command XCHANGE to swap two
; disk units.
;
;CALL: M/ The Message address
;
;RET: True always
TOPS10< INTERN D$XCH ;EXCHANGE DISK UNITS
D$XCH: PUSHJ P,.SAVE1 ;SAVE P1
MOVE S1,.XCHU1(M) ;GET UNIT 1 NAME
PUSHJ P,UCBLOC ;FIND THE UCB
JUMPF XCH.1 ;CAN'T - EXIT
MOVE P1,S1 ;SAVE ADDRESS
MOVE S1,.XCHU2(M) ;GET UNIT 2 NAME
PUSHJ P,UCBLOC ;FIND THE UCB
JUMPF XCH.2 ;CAN'T - EXIT
MOVE S2,.UCBNM(P1) ;GET OLD UNIT 1 NAME
EXCH S2,.UCBNM(S1) ;SET NEW UNIT 2 NAME, GET OLD UNIT 2
MOVEM S2,.UCBNM(P1) ;SET NEW UNIT 1 NAME
MOVE S2,.UCBAU(P1) ;GET OLD UNIT 1 ALT PORT
EXCH S2,.UCBAU(S1) ;SAVE OLD ALT PORT,,GET NEW ALT PORT
MOVEM S2,.UCBAU(P1) ;SAVE NEW ALT PORT NAME
$WTO (<Disk unit ^W/.XCHU1(M)/ exchanged with ^W/.XCHU2(M)/>,,,<$WTFLG(WT.SJI)>)
$RETT ;RETURN
XCH.1: SKIPA S1,.XCHU1(M) ;FIRST DEVICE FAILED
XCH.2: MOVE S1,.XCHU2(M) ;SECOND DEVICE FAILED
$WTO (<MDA data base update failure>,<Cannot find UCB for ^W/S1/>,,<$WTFLG(WT.SJI)>)
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL D$DMDR - ROUTINE TO UNWIND AND DELETE AN MDR
;CALL: AP/ The MDR Address
;
;RET: True Always
;AC Usage: AP/ MDR Entry
; P1/ VSL AOBJN AC
D$DMDR: PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
SKIPN S1,.MRVSL(AP) ;CHECK AND LOAD THE FIRST VSL ADDRESS
PJRST DELMDR ;NONE THERE,,JUST DELETE THE MDR
CAIN S1,TMPVSL ;ARE WE POINTING TO THE TEMP VSL ???
JRST DELMDR ;YES,,JUST DELETE THE MDR AND RETURN
LOAD P1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT
DMDR.1: MOVE S1,.MRVSL(AP) ;PICK UP THE CURRENT VSL ADDRESS
PUSHJ P,DELVSL ;GO DELETE IT
SOJG P1,DMDR.1 ;CONTINUE THROUGH ALL VSL'S
PUSHJ P,DELMDR ;DELETE THIS MDR
$RETT ;RETURN
SUBTTL D$IDENTIFY - ROUTINE TO PROCESS THE IDENTIFY COMMAND
;CALL: M /The Identify Message Address
;
;RET: True Always
TOPS10 <
D$IDEN: PUSHJ P,.SAVE4 ;SAVE SOME REGS
MOVX S1,.CMDEV ;GET THE DEVICE BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF E$IMO## ;NOT THERE,,THATS AN ERROR
PUSHJ P,LOCUCB ;GO FIND THE AFFECTED UCB
JUMPF D$ASGN ;NO UCB,,TRY REASSIGNMENT ANYWAY !!!
MOVE P1,S1 ;SAVE POINTER TO UCB
LOAD S1,.UCBST(P1),UC.AVA ;GET THE AVAILABLE STATUS BIT
SKIPN S1 ;IS THE DEVICE AVAILABLE ???
$ERJMP MD$IUD ;NO,,RETURN ERROR
;A Small Security Check Before We Start !!!
SKIPN P3,.UCBVL(P1) ;CHECK AND LOAD THE VOL BLOCK ADDRESS
$ERJMP MD$NVM ;RETURN NO VOLUME MOUNTED ON DRIVE !!!
LOAD S1,.VLOWN(P3),VL.CNT ;GET THE VOLUME REQUEST COUNT
LOAD S2,.UCBST(P1),UC.VSW ;AND GET THE DEVICE VOLUME SWITCH STATUS
SKIPE S1 ;CAN'T BE REQUESTED BY ANYONE
JUMPN S2,[$ERJMP MD$CIU] ; AND BE SWITCHING VOLS ON SAME DEVICE
;Check for a VOLID Block and process it if there is one.
MOVX S1,.VOLID ;GET THE VOLID BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF IDEN.1 ;NOT THERE,,CONTINUE ON
HRROI S1,0(S1) ;POINT TO THE ASCIZ VOLID
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
MOVE P4,S2 ;SAVE THE NEW VOL ID FOR A MINUTE
MOVE S1,S2 ;GET THE VOL ID IN S1
PUSHJ P,FNTAPE ;SEE IF ITS ALREADY IN OUT DATA BASE
SKIPF ;NOT THERE,,CONTINUE ONWARD
JUMPN S2,.RETT ;IF FOUND AND MOUNTED,,JUST RETURN
MOVE S1,P3 ;GET THE VOLUME ADDRESS IN S1
PUSHJ P,FNDOWN ;ANY OWNERS OF THE VOLUME ???
SKIPF ;NO,,SKIP
$ERJMP MD$DAU ;YES,,CAN THE REQUEST
LOAD S1,.VLFLG(P3),VL.LBT ;GET THE VOLUME LABEL TYPE
PUSHJ P,GETLBT ;RECODE IT TO SOMETHING UNDERSTANDABLE
CAXN S1,%LABEL ;IS THE VOLUME LABELED ???
$ERJMP MD$VIL ;YES,,CAN'T DO THIS
MOVEM P4,.VLNAM(P3) ;SAVE THE NEW VOLUME ID
$ACK (<Unlabeled volume ^W/.VLNAM(P3)/ mounted>,,MDAOBJ,.MSCOD(M))
$RETT ;ACK THE OPR AND RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
IDEN.1: MOVX S1,.ORREQ ;GET THE REQUEST-ID BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF E$IMO## ;NOT THERE,,THATS AN ERROR
MOVE S1,0(S1) ;LOAD THE USER REQUEST ID NUMBER
PUSHJ P,FNDVSL ;GET THE REQUESTED VSL ENTRY
JUMPF E$MRP## ;NOT THERE,,OPERATOR ERROR !!!
MOVE P4,S1 ;SAVE THE VSL ADDRESS
LOAD S1,.VSFLG(P4),VS.ABO ;WAS IT CANCELLED ???
JUMPN S1,E$MRP## ;YES,,EXIT NOW
LOAD S1,.UCBST(P1),UC.VSW ;GET THE VOLUME SWITCH BIT
SKIPE S1 ;NOT SWITCHING VOLS,,SKIP NEXT CHECK !!
CAMN P4,.UCBVS(P1) ;YES,,DOES THIS USER OWN THE DEVICE ???
SKIPA ;NO VOL SWTCH OR USER OWNS IT,,CONTINUE
$ERJMP MD$DAU ;UH OH,DEVICE IS IN USE BY SOMEONE ELSE
LOAD S2,.VSCVL(P4),VS.OFF ;GET OFFSET TO CURRENT VOLUME IN SET
ADDI S2,.VSVOL(P4) ;AIM AT THAT POINTER
MOVE P2,0(S2) ;GET ADDR OF THAT VOLUME BLOCK
SKIPE S1,.VLUCB(P2) ;IS THE REQUESTED VOLUME MOUNTED?
CAMN S1,P1 ;YES, IS THE OPR DOING THE RIGHT THING?
SKIPA ;NOT MOUNTED OR CORRECT DRIVE, SKIP
$ERJMP MD$VND,P4 ;OPR PICKED WRONG DRIVE.. TELL HIM
MOVE S1,P2 ;GET THE VOLUME ADDRESS IN S1
PUSHJ P,FNDOWN ;ANY OWNERS OF THE VOLUME ???
SKIPF ;NO,,SKIP
$ERJMP MD$VAU ;YES,,CAN THE REQUEST
SKIPE S1,.VLNAM(P3) ;DID THE OPR SPECIFY A VOLUME?
SKIPN S2,.VLNAM(P2) ;GET USER'S REELID
JRST IDN.1A ;NO REELID OR SCRATCH
CAME S1,S2 ;IS IT WHAT THE USER SPECIFIED
$ERJMP MD$RDM,P4 ;NO, GIVE ERROR
IDN.1A: MOVE S1,P3 ;GET THE VOLUME ADDRESS IN S1
PUSHJ P,FNDOWN ;ANY OWNERS OF THE VOLUME ???
SKIPF ;NO,,SKIP
$ERJMP MD$DAU ;YES,,CAN THE REQUEST
LOAD S2,.VSFLG(P4),VS.LBT ;GET THE REQUESTED LABEL TYPE
CAXN S2,.TFLBP ;USER WANTS BYPASS?
JRST IDEN.3 ;YES,,JUST GO REASSIGN THE VOLUME
LOAD S1,.VLFLG(P3),VL.LBT ;GET VOLUME'S LABEL TYPE
PUSHJ P,GETLBT ;GET EASY CODE
CAXE S1,%LABEL ;IS THE MOUNTED VOLUME LABELED?
JRST IDEN.2 ;NO,,CHECK VOLIDS
LOAD S1,.VLFLG(P2),VL.SCR ;YES,,GET THE VOLUME'S SCRATCH BIT
JUMPE S1,[$ERJMP MD$VIL,P4] ;CAN'T HAVE LABELS & NOT BE SCRATCH
IDEN.2: SKIPN .VLNAM(P2) ;REQUESTED VOL MUST HAVE A NAME !!
SKIPE .VLNAM(P3) ; OR ELSE MOUNTED VOL MUST HAVE A NAME
SKIPA ;YES TO EITHER,,WIN !!
$ERJMP MD$NVI,P4 ;BOTH NULL,,CAN'T DO THIS !!!
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
IDEN.3: DMOVE S1,P3 ;GET THE VOL AND VSL ADDRESSES
PUSHJ P,CVLVSL ;CHECK THE REQUESTED CHARACTERISTICS
JUMPF .RETF ;NO GOOD,,JUST RETURN
;Found a matching volume - there may be a VOL block off the VSL from
;the requesting MDR, and another from the UCB for the mounted volume.
;If so, we will have to merge them together, and throw one away.
CAIN P2,0(P3) ;ARE OLD AND NEW VOL'S THE SAME ???
JRST IDEN.4 ;YES,,DONT DELETE ANY - JUST CONTINUE
MOVE T1,.VLFLG(P2) ;SAVE THE OLD FLAG BITS (JUST IN CASE)
LOAD S1,.VLFLG(P3),VL.FLG ;GET ALL THE FLAGS FOR THIS UNIT'S VOL
STORE S1,.VLFLG(P2),VL.FLG ;SAVE IN REAL VOL BLOCK
MOVE S1,.VLNAM(P3) ;GET VOL NAME FOR THIS UNITS VOL BLK
SKIPE .VLNAM(P2) ;IS THERE A NAME IN THE USERS VOL BLOCK
JRST IDN.3A ;YES,,NO NEED TO ALLOCATE THE NEW ONE !!
;Update the VOL volid and allocate it
MOVEM S1,.VLNAM(P2) ;NO,,SAVE UNITS VOLID AS USERS VOLID
MOVE S1,P4 ;GET THE VSL ADDRESS
PUSHJ P,CKTVOL ;VALIDATE THIS VOLID FOR THIS USER
JUMPF [SETZM .VLNAM(P2) ;NO GOOD,,BACK TO SCRATCH
MOVEM T1,.VLFLG(P2) ;RESTORE THE OLD FLAG BITS
$RETF ] ;AND RETURN
PUSHJ P,D$BMTX ;LOCATE THIS GUYS 'B' MATRIX ENTRY
MOVE S1,P2 ;GET THE VOL ADDRESS
PUSHJ P,D$TVRS ;CONVERT TO A RESOURCE NUMBER
MOVE S2,P4 ;GET THE VSL ADDRESS
PUSHJ P,ADDBMA ;UPDATE THE USERS 'B' MATRIX
IDN.3A: MOVX S1,VL.SCR ;GET THE SCRATCH VOLUME BIT
ANDCAM S1,.VLFLG(P2) ; AND CLEAR IT
MOVE S1,P3 ;GET THE VOL BLK WE WANT TO DELETE
PUSHJ P,DELVOL ;GO DELETE IT
MOVEM P2,.UCBVL(P1) ;LINK THE USERS VOL TO THE UCB
MOVEM P1,.VLUCB(P2) ;LINK THE UCB TO THE USERS VOL
IDEN.4: LOAD S1,.VSFLG(P4),VS.LBT ;GET THE VOLUME SET LABEL TYPE
STORE S1,.VLFLG(P2),VL.LBT ;SAVE AS THE VOLUME LABEL TYPE
;Check to make sure there is no deadlock
MOVE S1,P4 ;GET THE VSL ADDRESS IN S1
PUSHJ P,D$ALCT ;ALLOCATE/DEADLOCK CHECK THE VSL
JUMPF .RETF ;NO GOOD,,OH WELL WE TRIED !!!!!
;So far so good, go off and reassign the tape
MOVE S1,P1 ;AIM AT THIS UCB
MOVE S2,P4 ;AND THIS VSL
PUSHJ P,REASSIGN ;TRY TO REASSIGN THE DEVICE
JUMPF .RETT ;CAN'T,,RETURN
MOVE S1,P4 ;OK,,GET THE VSL ADDRESS BACK
PUSHJ P,MNTVSL ;TRY TO MOUNT OTHER VOLS
$RETT ;AND RETURN
>;END TOPS10
SUBTTL REASSIGN - Try to give a unit to a user
;CALL: S1/ The UCB Address
; S2/ The VSL Address
; AP/ The MDR Address
;
;RET: True - The device was reassigned with the specified logical name
; False - The device is owned, the Volume is owned,
; or he has Conflicting logical names
REASSIGN:
TOPS10< PUSHJ P,.SAVE4 ;SAVE SOME REGS
$SAVE <T1,T2> ;SAVE T1 AND T2 ALSO
DMOVE P1,S1 ;GET THE UCB IN P1, VSL IN P2
MOVE S1,.UCBNM(P1) ;GET THE DEIVCE NAME IN S1
MOVEM S1,MDAOBJ+OBJ.UN ;SAVE AS THE CURRENT UNIT
LOAD P3,.VSCVL(P2),VS.OFF ;GET THE OFFSET TO THE CURRENT VOLUME
ADDI P3,.VSVOL(P2) ;POINT TO THE CURRENT VOL ADDRESS
MOVE P3,0(P3) ;GET THE VOLUME ADDRESS
MOVX T1,%STAMN ;GET 'VOLUME MOUNTED' STATUS CODE
STORE T1,.VLFLG(P3),VL.STA ;SET IT IN THE VOLUME FLAG WORD
MOVE P4,.VSUCB(P2) ;GET THE OLD UNIT ADDRESS
MOVE S1,P2 ;GET THE VSL ADDRESS IN S1
PUSHJ P,SETOWN ;UPDATE VOLUME OWNERSHIP
LOAD S2,.VSFLG(P2),VS.VSW ;IS THIS GUY IN VOLUME SWITCH MODE ???
JUMPN S2,REAS.S ;YES, THEN SWITCH UNITS
MOVX S1,VL.SRD ;GET SET REQUESTED DENSITY FOR USER BIT
TDNN S1,.VLFLG(P3) ;NEED TO DO IT?
JRST REAS.0 ;NOPE
MOVE S1,.UCBNM(P1) ;GET DEVICE NAME
LOAD S2,.VSATR(P2),VS.DEN ;GET THE REQUESTED DENSITY
PUSHJ P,I$SDEN## ;SET IT
JUMPT REAS.0 ;ONWARD
MOVEI S1,[ITEXT (<Can't set density to ^T/@DENSTY(S2)/ on unit ^W/.UCBNM(P1)/>)]
LOAD S2,.VLFLG(P3),VL.DEN ;GET THE REQUESTED DENSITY AGAIN
JRST REAS.E ;PROCESS ERROR
REAS.0: LOAD S2,.MRJOB(AP),MD.PJB ;GET THE USERS JOB NUMBER
TXNE S2,BA%JOB ;FOR A PSEUDO PROCESS ???
JRST REAS.3 ;YES,,SKIP THE REST OF THIS !!
$COUNT (TAPM) ;COUNT TAPE MOUNTS (NOT VOL SWITCHES)
REAS.1: MOVE T2,.VSLNM(P2) ;GET THE LOGICAL NAME IN T2
MOVE T1,.UCBNM(P1) ;GET THE DEVICE NAME IN T1
DEVLNM T1, ;ASSIGN A LOGICAL NAME
$STOP(LNA,Logical Name Assignment Failed)
LOAD T1,.MRJOB(AP),MD.PJB ;GET THE JOB NUMBER IN T1
MOVE T2,.UCBNM(P1) ;GET THE DEVICE NAME IN T2
REASSI T1, ;REASSIGN THE DEVICE TO THE USER
JUMPLE T1,REAS.2 ;FAILED,,RETURN NO GOOD
MOVEM T2,MDAOBJ+OBJ.UN ;SAVE THE DEVICE NAME FOR LATER
MOVEM P1,.VSUCB(P2) ;LINK THE UCB TO THIS USER
MOVEM P2,.UCBVS(P1) ;LINK THIS USER TO THIS DEVICE
MOVX S1,VS.DDN+VS.DTK ;GET DEFAULT DENSITY+TRACK STATUS BITS
ANDCAM S1,.VSATR(P2) ;CLEAR THEM - NO MORE DEFAULTING !!!!!
MOVE S1,P2 ;GET THE VSL ADDRESS
PUSHJ P,I$TMNT## ;PERFORM TAPE ACCOUNTING
MOVE S1,P2 ;AIM AT THE VOLUME SET LIST
PUSHJ P,LBLNOT ;TELL THE LABEL PROCESSOR OF THE CHANGE
$WTO (<Volume ^W/.VLNAM(P3)/ reassigned>,<^I/DEMO/>,MDAOBJ)
$RETT ;AND RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
REAS.2: SKIPE .VSLNM(P2) ;ANY LOGICAL NAME ???
JRST [SETZM .VSLNM(P2) ;YES,,ZAP IT
JRST REAS.1 ] ;AND RETRY THE REASSIGN
MOVE S1,P2 ;NO,,GET THE VSL ADDRESS
PUSHJ P,CLROWN ;CLEAR THE OWNERSHIP STATUS
MOVX S1,%STAWT ;GET WAITING STATUS
STORE S1,.VLFLG(P3),VL.STA ;SET IT
MOVEI S1,[ITEXT (<REASSI UUO failed on volume ^W/.VLNAM(P3)/>)]
REAS.E: $WTO (<Reassignment failure>,<^I/(S1)/ for ^I/DEMO/>,MDAOBJ)
$TEXT (<-1,,G$MSG>,<^I/(S1)/, request deleted^M^J^0>)
SETOM ERRACK ;THIS IS AN ERROR
PUSHJ P,USRNOT ;TELL THE USER
MOVE S1,P2 ;NO GOOD,,GET THE VSL ADDRESS
PUSHJ P,ALCVSL ;RETURN THIS VSL TO THE ALLOCATION POOL
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE USERS REQUEST COUNT
SKIPN S1 ;STILL MORE REQUESTS,,SKIP
PUSHJ P,DELMDR ;NOTHING LEFT,,DELETE THE MDR
$RETF ;AND RETURN 'REASSIGN FAILED'
REAS.3: DOSCHD ;FORCE A SCHEDULING PASS
MOVX S1,VS.NMT ;GET THE 'NOT REALLY MOUNTED' FLAG BIT
IORM S1,.VSFLG(P2) ;SET IT FOR THIS PSEUDO PROCESS
MOVE S1,.MRQEA(AP) ;GET THE QE ADDRESS
MOVX S2,QE.WAM ;GET 'WAITING FOR MOUNT' STATUS
ANDCAM S2,.QESEQ(S1) ;AND CLEAR IT
MOVEM P1,.VSUCB(P2) ;LINK THE UCB TO THIS USER
MOVEM P2,.UCBVS(P1) ;LINK THIS USER TO THIS DEVICE
MOVE S1,.QERID(S1) ;GET ITS REQUEST ID
$WTO (<Volume ^W/.VLNAM(P3)/ reassigned>,<User: ^W6/.MRNAM(AP)/^W/.MRNAM+1(AP)/ ^U/.MRUSR(AP)/ batch req# ^D/S1/>,MDAOBJ)
$RETT ;RETURN
SUBTTL REAS.S - Routine to Perform Volume Switch Processing
;CALL: P1/ New UCB addr
; P2/ VSL addr
; P3/ VOL addr
; P4/ Old UCB Addr
; AP/ MDR
REAS.S: $COUNT (VSWM) ;count volume switches
STORE P1,.VSUCB(P2) ;LINK THE UCB TO THIS USER
SETZM .UCBVS(P4) ;AND THE OLD UNIT ISN'T TIED UP...
STORE P2,.UCBVS(P1) ;LINK THIS USER TO THIS DEVICE
ZERO .UCBST(P4),UC.VSW ;...WAITING FOR VOLUME SWITCH
ZERO .VSFLG(P2),VS.VSW ;...AND VSL ISN'T SWITCHING, EITHER
MOVX S1,.QOVSD ;VOLUME SWITCH DIRECTIVE BLOCK
PUSHJ P,LBLHDR ;START THE MESSAGE
;Build the First Block, Describing the Units Involved
AOS G$MSG+.OARGC ;ONE MORE BLOCK
MOVEI S2,G$MSG+.OHDRS ;AIM AT THE FIRST BLOCK SPACE
MOVX S1,.VSDBL ;BLOCK TYPE - DEVICES
STORE S1,ARG.HD(S2),AR.TYP ;SET IN BLOCK
MOVX S1,ARG.DA+VSDLEN ;SIZE OF THE BLOCK
STORE S1,ARG.HD(S2),AR.LEN ;LENGTH OF THIS ONE
ADDI S2,ARG.DA ;POINT AT THE DATA
ADDM S1,G$SAB##+SAB.LN ;AND SEND LENGTH, TOO
MOVSS S1 ;TO LH
ADDM S1,G$MSG+.MSTYP ;UPDATE MESSAGE LENGTH
LOAD S1,.UCBNM(P4) ;GET OLD UNIT NAME
STORE S1,.VSDID(S2) ;SAVE IN MESSAGE
LOAD S1,.UCBNM(P1) ;GET NEW UNIT NAME
STORE S1,.VSDCD(S2) ;SAVE AS NEW UNIT NAME
ADDI S2,VSDLEN ;UPDATE POINTER PAST BLOCK
;Build the Second Block, Describing the Volume Set and User who Owns The Drive
AOS G$MSG+.OARGC ;ONE MORE BLOCK
MOVX S1,.VOLMN ;GET THE NEXT BLOCK TYPE
STORE S1,ARG.HD(S2),AR.TYP ;SAVE AS BLOCK TYPE
MOVX S1,.VMNSZ+ARG.DA ;GET THE LENGTH OF THE BLOCK
STORE S1,ARG.HD(S2),AR.LEN ;AND SAVE IN BLOCK HEADER
ADDM S1,G$SAB+SAB.LN ;UPDATE SEND LENGTH
MOVSS S1 ;GET TO LH
ADDM S1,G$MSG+.MSTYP ;UPDATE TOTAL MESSAGE LENGTH
MOVEI S2,ARG.DA(S2) ;AIM AT THE DATA PORTION OF THE BLOCK
LOAD S1,.VLNAM(P3) ;GET THE VOLUME NAME
STORE S1,.VMNIV(S2) ;SAVE AS INITIAL VOLUME NAME
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
MOVEI S1,.VSVOL(P2) ;AIM AT THE FIRST VOLUME BLOCK ADR
MOVE S1,(S1) ;GET THE ADR OF THE FIRST VOL BLOCK
LOAD S1,.VLNAM(S1) ;GET THE NAME OF THE FIRST VOLUME
STORE S1,.VMNFV(S2) ;SAVE IN MESSAGE TO LABELLER
LOAD S1,.VSFLG(P2),VS.LBT ;GET THE LABEL TYPE
STORE S1,.VMNIN(S2),VI.LTY ;SAVE IN MESSAGE
LOAD S1,.VSFLG(P2),VS.WLK ;GET THE WRITE LOCK BIT
STORE S1,.VMNIN(S2),VI.WLK ;SAVE IN INFO WORD OF MESSAGE
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE JOB NUMBER
STORE S1,.VMNIN(S2),VI.JOB ;TEL THE LABELLER WHO'S THERE
;Here to make sure the density is set correctly
LOAD S1,.VLFLG(P3),VL.DEN ;Get the density for this volume
LOAD S2,.VSATR(P2),VS.DEN ;Get the density code for this vol set
CAMN S1,S2 ;Are they the same??
JRST REA.S0 ;Yes, no need to set it then
STORE S2,.VLFLG(P3),VL.DEN ;Store it away for next time
LOAD S1,.UCBNM(P1) ;Get the name of the drive
PUSHJ P,I$SDEN## ;Set it
;Tell everyone about it
REA.S0: PUSHJ P,C$SEND## ;TELL THE LABELLER
MOVE S1,P2 ;GET THE VSL ADDRESS
PUSHJ P,I$TMNT## ;PERFORM TAPE ACCOUNTING
$WTO (<Volume ^W/.VLNAM(P3)/ reassigned>,<^I/DEMO/>,MDAOBJ) ;TELL OPR
$TEXT (<-1,,G$MSG>,<Logical name ^W/.VSLNM(P2)/ switched to volume ^W/.VLNAM(P3)/ on ^W/.UCBNM(P1)/^M^J^0>)
PUSHJ P,USRNOT ;TELL THE USER, IF INTERESTED
MOVE S1,P4 ;GET TO THE OLD UNIT
PUSHJ P,MATUNI ;TRY TO GIVE IT AWAY
$RETF ;RETURN FALSE IN ANY CASE
>
TOPS20< $RETT > ;REASSIGN FAILS ON THE -20
SUBTTL D$ASGN - ROUTINE TO ASSIGN FOREIGN DEVICES UNDER MDA
;CALL: M/ The IDENTIFY Message Address
;
;RET: True Always
TOPS10<
D$ASGN: PUSHJ P,.SAVE3 ;SAVE P1 AND P2 AND P3
MOVX S1,.CMDEV ;GET THE DEVICE BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND THE DEVICE BLOCK
HRROI S1,0(S1) ;POINT TO THE ASCIZ DEVICE NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
DEVNAM S2, ;IS IT VALID ???
JRST [MOVEI S1,[ASCIZ/Unknown device specified/] ;NO,,GET ERROR TEXT
JRST ASGN.3 ] ;AND EXIT
MOVEM S2,MDAOBJ+OBJ.UN ;SAVE THE DEVICE NAME
MOVE S1,S2 ;S1:= DEVICE NAME
PUSHJ P,I$CKAV## ;IS IT FREE ?
JUMPT [MOVEI S1,[ASCIZ/Device not available/] ;NO
JRST ASGN.3 ] ;EXIT
MOVE S2,MDAOBJ+OBJ.UN ;GET THE DEVICE
DEVTYP S2, ;GET ITS CHARACTERISTICS
JRST [MOVEI S1,[ASCIZ/Unknown device specified/] ;CAN'T
JRST ASGN.3 ] ;EXIT
LOAD P1,S2,TY.DEV ;SAVE THE DEVICE TYPE
MOVX S1,.ORREQ ;GET THE REQUEST ID BLOCK TYPE
PUSHJ P,A$FNDB## ;GET THE REQUEST TO ASSIGN TO
JUMPF [MOVEI S1,[ASCIZ/Request ID must be specified/] ;NOT THERE
JRST ASGN.3 ] ;GET ERROR TEXT AND EXIT
MOVE S1,0(S1) ;GET THE REQUEST ID
PUSHJ P,FNDVSL ;FIND THE USER
JUMPF [MOVEI S1,[ASCIZ/Invalid request ID specified/] ;NOT THERE
JRST ASGN.3 ] ;GET ERROR TEXT AND EXIT
MOVE P2,S1 ;SAVE THE VSL ADDRESS
LOAD S1,.VSFLG(P2),VS.TYP ;GET THE REQUEST TYPE
CAXE S1,%UNKN ;S IS 'UNKNOWN' ?
CAXN S1,%DTAP ;OR A DECTAPE ?
SKIPA ;YES TO EITHER
JRST [MOVEI S1,[ASCIZ/User requested disk or tape volumes/] ;NO,,
JRST ASGN.3 ] ;GET ERROR TEXT AND EXIT
HRROI S1,.VSVSN(P2) ;GEN POINTER TO VOL SET NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
DEVTYP S2, ;GET THE REQUESTED DEVICE TYPE
SKIPA S2,P1 ;ON ERROR FORCE A MATCH !!!
LOAD S2,S2,TY.DEV ;GET THE DEVICE TYPE
CAME S2,P1 ;DOES REQUESTED MATCH IDENTIFIED ???
JRST [MOVEI S1,[ASCIZ/Specified device does not match requested device/]
JRST ASGN.3 ] ;NO,,GET ERROR TEXT AND EXIT
MOVE S1,MDAOBJ+OBJ.UN ;GET THE DEVICE NAME
PUSHJ P,I$MDAS## ;SET THE MDA BIT (DVCMDA)
ASGN.1: MOVE S1,MDAOBJ+OBJ.UN ;GET THE DEVICE NAME
MOVE S2,.VSLNM(P2) ;GET THE LOGICAL NAME
DEVLNM S1, ;ASSIGN A LOGICAL NAME TO THE DEVICE
JFCL ;IGNORE THE ERROR
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE USERS JOB NUMBER
MOVE S2,MDAOBJ+OBJ.UN ;GET THE DEVICE NAME
REASSI S1, ;ASSIGN IT TO THE USER
JUMPLE S1,ASGN.2 ;IF IT FAILED,,PROCESS THE ERROR
$COUNT (GENM) ;count generic mounts
$ACK (<Reassigned>,<^I/DEMO/>,MDAOBJ,.MSCOD(M)) ;TELL THE OPR
MOVE S1,P2 ;GET THE VSL ADDRESS
PUSHJ P,SETOWN ;SET SOME OWNERSHIP BITS
MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%LAST ;POSITION TO THE LAST ENTRY
MOVX S2,UCBLEN ;GET THE UCB LENGTH
PUSHJ P,L%CENT ;CREATE A UCB FOR THIS DEVICE
MOVEM S2,.VSUCB(P2) ;LINK THE UCB TO THE VSL
MOVEM P2,.UCBVS(S2) ;LINK THE VSL TO THE UCB
MOVE S1,MDAOBJ+OBJ.UN ;GET THE DEVICE NAME
MOVEM S1,.UCBNM(S2) ;SAVE IT
PUSHJ P,ASGN.A ;ACK THE USER AND GET NEXT VSL
MOVE P1,S1 ;SAVE THE NEXT MOUNT VSL ADDRESS
MOVE S1,P2 ;GET THE VSL ADDRESS IN S1
LOAD TF,.VSFLG(P2),VS.TYP ;GET THE REQUEST TYPE
CAXN TF,%DTAP ;A DECTAPE ?
PUSHJ P,I$DMNT## ;YES - MAKE ACCOUNTING ENTRY
MOVX S2,VS.WAL ;GET THE WAITING FOR ALLOCATION STATUS
IORM S2,.VSFLG(P2) ;LITE IT (WE NEVER WERE ALLOCATED)
SKIPE S1,P1 ;ANY MORE REQUESTS ???
PUSHJ P,MNTVSL ;YES,,TRY TO MOUNT THEM
$RETT ;RETURN
;Here if the reassignment fails
ASGN.2: SKIPE .VSLNM(P2) ;ANY LOGICAL NAME ???
JRST [SETZM .VSLNM(P2) ;YES,,ZAP IT
JRST ASGN.1 ] ;AND RETRY THE REASSIGNMENT
$ACK (<Reassignment failure>,<Can't reassign device to ^I/DEMO/>,MDAOBJ,.MSCOD(M))
MOVEI S1,[ITEXT (<Reassignment failed - request deleted>)]
SETOM ERRACK ;LITE ERROR ACK FLAG
PUSHJ P,ASGN.A ;ACK THE USER AND GET NEXT VSL
MOVE P1,S1 ;SAVE THE NEXT VSL ADDRESS
MOVE S1,P2 ;GET THE VSL ADDRESS IN S1
PUSHJ P,DELVSL ;DELETE THIS REQUEST
LOAD S1,.MRCNT(AP),MR.CNT ;GET HIS REQUEST COUNT
JUMPE S1,DELMDR ;IF NO MORE REQUESTS,,DELETE THE MDR
SKIPE S1,P1 ;ANY MORE REQUESTS ???
PUSHJ P,MNTVSL ;YES,,TRY TO MOUNT THEM
$RETT ;RETURN
ASGN.3: $ACK (<Can't identyfy this device>,<^T/0(S1)/>,MDAOBJ,.MSCOD(M))
$RETT ;RETURN
;Here to ACK the user and find the next mount request
ASGN.A: LOAD P1,.MRCNT(AP),MR.CNT ;GET THE USERS REQUEST COUNT
MOVNS P1 ;NEGATE IT
MOVSS P1 ;MOVE RIGHT TO LEFT
HRRI P1,.MRVSL(AP) ;CREATE VSL AOBJN SEARCH AC
LOAD S2,.VSRID(P2),VS.LNK ;GET THIS REQUESTS LINK CODE
ASGN.B: MOVE P3,0(P1) ;GET A VSL ADDRESS
LOAD S1,.VSRID(P3),VS.LNK ;GET ITS LINK CODE
CAME P3,P2 ;IS THIS THE CURRENT VSL ???
CAME S1,S2 ;NO,,DO LINK CODES MATCH ???
AOBJN P1,ASGN.B ;CURRENT VSL OR NO MATCH,,TRY NEXT
MOVE S1,P2 ;GET THE VSL ADDRESS
PUSHJ P,ACKUSR ;ACK THE USER
SKIPL P1 ;DID WE FIND A MATCH ???
SETZM P3 ;NO,,CLEAR THE LAST VSL ADDRESS
MOVE S1,P3 ;RETURN NEXT VSL ADDRESS
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL D$ENABLE/D$DISABLE DRIVE AVR STATUS
;CALL: M/ The Enable/Disable Message Address
;
;The following cases for enable/disable can occur:
; .TAPDV A particular tape/disk drive - change AVR
; .ALTAP All tape drives - change AVR
; .ALDSK All disk drives - change AVR
; .ALSTR Change automatic structure recognition
; (defaults if all others fail)
;
;RET: True Always
TOPS10 <
D$ENABLE: TDZA S1,S1 ;INDICATE 'ENABLE' ENTRY POINT
D$DISABLE: SETOM S1 ;INDICATE 'DISABLE' ENTRY POINT
PUSHJ P,.SAVE2 ;SAVE P1 AND P2 FOR A MINUTE
MOVE P1,S1 ;SAVE THE ENTRY POINT INDICATOR IN P1
MOVX S1,.TAPDV ;GET DRIVE BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN OUR MESSAGE
JUMPT ABLE.0 ;Found specific unit, go process it
MOVX S1,.ALTAP ;GET ALL TAPE DRIVE MSG BLOCK
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPT ABLE.1 ;FOUND IT,,GO SET ALL TAPE DRIVES
MOVX S1,.ALDSK ;Get all disk drive msg block
PUSHJ P,A$FNDB## ;Find it in the message
JUMPT ABLE.2 ;Go process it
;Fall through assuming .ALSTR
;Here to Enable/Disable Automatic Structure Recognition
SKIPN P1 ;IS THIS AN ENABLE FUNCTION ???
SETOM D$ASR ;YES,,LITE THE ASR FLAG
SKIPE P1 ;IS THIS A DISABLE FUNCTION ???
SETZM D$ASR ;YES,,CLEAR THE ASR FLAG
$ACK (<Structure recognition is ^T/@DISENA+1(P1)/>,,,.MSCOD(M))
$RETT ;RETURN
;Here to Enable/Disable Automatic Volume Recognition for a unit
ABLE.0: PUSHJ P,FNDUCB ;GO FIND THE AFFECTED UCB
JUMPF .RETF ;NOT THERE,,DEVICE DOES NOT EXIST !!!
MOVX S2,UC.AVR ;GET THE AVR BIT IN S1
SKIPN P1 ;IS THIS 'ENABLE' ???
IORM S2,.UCBST(S1) ;YES,,LITE THE AVR BIT
SKIPE P1 ;OR IS THIS 'DISABLE' ???
ANDCAM S2,.UCBST(S1) ;YES,,CLEAR THE AVR BIT
$ACK (<Volume recognition is ^T/@DISENA+1(P1)/>,,MDAOBJ,.MSCOD(M))
$RETT ;ACK THE OPERATOR AND RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here to Enable/Disable Automatic Volume Recognition for all units
ABLE.1: TDZA P2,P2 ;Indicate all tapes
ABLE.2: SETOM P2 ;Indicate all disks
MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%FIRST ;GET THE FIRST ENTRY
ABLE.3: LOAD S1,.UCBST(S2),UC.AVA ;IS THIS DRIVE 'KNOWN' TO MDA?
JUMPE S1,ABLE.5 ;NOPE, LEAVE ITS BITS ALONE
LOAD S1,.UCBST(S2),UC.DVT ;Get the device type
CAIN S1,%TAPE ;Is it a tape?
JUMPE P2,ABLE.4 ;Yes, do we want tapes?
CAIN S1,%DISK ;No, is it a disk?
JUMPL P2,ABLE.4 ;Yes, do we want disks?
JRST ABLE.5 ;No, don't like this one
ABLE.4: MOVX S1,UC.AVR ;GET THE AVR BIT IN S1
SKIPN P1 ;IS THIS 'ENABLE' ???
IORM S1,.UCBST(S2) ;YES,,LITE THE AVR BIT
SKIPE P1 ;OR IS THIS 'DISABLE' ???
ANDCAM S1,.UCBST(S2) ;YES,,CLEAR THE AVR BIT
ABLE.5: MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT UCB ENTRY
JUMPT ABLE.3 ;FOUND ONE,,GO PROCESS IT
MOVEI S1,[ASCIZ/tape drives/] ;DEFAULT TO TAPE DRIVES
SKIPE P2 ;UNLESS IT WAS DISK DRIVES
MOVEI S1,[ASCIZ/disk drives/] ; THEN MAKE IT DISKS
$ACK (<Volume recognition is ^T/@DISENA+1(P1)/ for all ^T/0(S1)/>,,,.MSCOD(M))
$RETT ;ACK THE OPERATOR AND RETURN
DISENA: [ASCIZ/Disabled/]
[ASCIZ/Enabled/]
>
SUBTTL D$RECOGNIZE - PROCESS THE OPR RECOGNIZE COMMAND
;CALL: M/ The Recognize Message Address
;
;RET: True Always
TOPS10 <
D$RECO: PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
MOVX S1,.TAPDV ;GET THE TAPE DEVICE NAME BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF E$IMO## ;NOT THERE,,THATS AN ERROR
PUSHJ P,FNDUCB ;FIND THE AFFECTED UCB
JUMPF .RETF ;NOT THERE,,THATS AN ERROR
MOVE S1,S2 ;GET THE DEVICE CHECKED AGAINST
PJRST SNDREC ; AND SEND THE RECOGNIZE MESSAGE TO
; THE TAPE LABELER
>
SUBTTL D$AVR - TAPE/DISK ONLINE PROCESSOR
;CALL: M/ The TAPE/DISK Online Message Address
;
;RET: True Always
;This routine fields Tape/Disk Online IPCF Messages from the
;monitor and possibly kicks the Tape Label Processor to read the
;labels from the volume mounted on the unit and send the Info
;back to QUASAR
TOPS10 <
D$AVR: LOAD S1,.TONST(M),TON.TY ;GET DEVICE TYPE FROM MESSAGE
CAXE S1,.TYDSK ;IS IT A DISK ONLINE MESSAGE ???
CAXN S1,.TYMTA ;OR IS IT A MAGTAPE?
SKIPA ;YES,,GO PROCESS IT
$RETT ;ELSE IGNORE IT
PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
MOVE S1,.TONDV(M) ;GET DEVICE NAME
PUSHJ P,UCBLOC ;FIND OUR UCB BLOCK ON THIS GUY
JUMPF .RETT ;STRANGE, MONITOR IS FUNNY
LOAD S2,.UCBST(S1),UC.AVA ;IS IT AVAILABLE ???
JUMPE S2,.RETT ;NO,,RETURN NOW
MOVE S2,S1 ;SAVE UCB ADR
MOVX S1,UC.AVR ;GET AVR ENABLED BIT
SKIPN .UCBVS(S2) ;IS THE DRIVE OWNED ???
TDNE S1,.UCBST(S2) ;IS THIS DRIVE ENABLED?
SKIPA ;AVR OR DRIVE OWNED,,LETERRIP
JRST AVR.2 ;NO,,GO FINISH UP
LOAD S1,.UCBST(S2),UC.DVT ;GET THE UNIT TYPE
CAXN S1,%DISK ;IS IT A DISK UNIT ???
JRST AVR.1 ;YES,,JUST READ THE LABELS
SKIPN P1,.UCBVL(S2) ;GET ATTACHED VOLUME BLOCK, IF ANY
JRST AVR.1 ;NO VOLUME, GO READ THE LABELS
MOVE S1,P1 ;GET THE VOLUME ADDRESS IN S1
PUSHJ P,FNDOWN ;ANY OWNERS OF THE VOLUME ???
JUMPF AVR.1 ;NO,,READ THE LABELS (AGAIN)
LOAD S1,.VLFLG(P1),VL.LBT ;IT IS OWNED, GET LABEL TYPE
CAXN S1,.TFLBP ;IS IT A BYPASS LABEL TAPE?
$RETT ;YES, LEAVE IT ALL UP TO THE USER
AVR.1: MOVE S1,.TONDV(M) ;GET DEVICE NAME SUPPLIED IN MESSAGE
PJRST SNDREC ;AND ASK PULSAR FOR SERVICE
AVR.2: LOAD S1,.TONST(M),TON.TY ;GET DEVICE TYPE FROM MESSAGE
CAXE S1,.TYDSK ;IS IT A DISK ONLINE MESSAGE ???
$RETT ;NO,,RETURN
LOAD S1,.TONDV(M) ;GET DEVICE NAME
MOVE S2,[.DUCLM,,S1] ;GET DISK. PARM LIST
DISK. S2, ;CLEAR DEVICE UNISTS WORD
JFCL ;IGNORE THE ERROR
$RETT ;RETURN
>
SUBTTL D$DEVSTA - PROCESS TAPE/DISK STATUS MESSAGES
;CALL: M/ The Status Message Address
;
;RET: True Always
TOPS10 <
D$DEVS: MOVX S1,.STSTS ;GET THE STATUS BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF MISC.3 ;NOT THERE,,THATS AN ERROR
MOVE T1,S1 ;SAVE THE STATUS BLOCK ADDRESS
MOVE S1,.STUNT(T1) ;GET THE UNIT NAME
PUSHJ P,UCBFND ;FIND IT IN OUR DATA BASE
JUMPF MISC.3 ;NOT THERE,,THATS AN ERROR
MOVE T2,S1 ;SAVE THE UCB ADDRESS
MOVSI S1,.DUCLM ;'CLEAR MDA WAIT' FUNCTION
HRRI S1,.UCBNM(T2) ;MUST POINT TO PRIMARY PORT NAME
DISK. S1, ; EVEN IF .STUNT HAS ALTERNATE PORT
JFCL ;IGNORE ERRORS
LOAD S1,.STFLG(T1),ST.OFL ;GET THE UNIT OFFLINE BIT
STORE S1,.UCBST(T2),UC.OFL ;AND SAVE IT
JUMPN S1,DEVS.1 ;IF OFFLINE,,GO PROCESS IT
MOVX S1,UC.INI ;GET THE 'DRIVE INITIALIZING' BIT
TDNE S1,.UCBST(T2) ;IS THIS DRIVE WRITING LABELS?
$RETT ;YES, IGNORE THE STATUS MESSAGE
MOVX S1,.TLSTA ;GET THE TAPE DEVICE STATUS BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPT [MOVE T3,S1 ;GET THE TAPE STATUS BLK ADDRESS IN T3
PJRST TAPDEV ] ;AND GO PROCESS IT
MOVX S1,.DSSTA ;GET STRUCTURE DEVICE STATUS BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPT [MOVE T3,S1 ;GET THE DISK STATUS BLK ADDRESS IN T3
PJRST DSKDEV ] ;AND GO PROCESS IT
PJRST MISC.3 ;NOT THERE,,INVALID STATUS MESSAGE
;Here if unit is offline
DEVS.1: $WTO (<Offline>,,MDAOBJ) ;TELL OPR
LOAD S1,.UCBST(T2),UC.DVT ;GET THE UNIT DEVICE TYPE
CAXN S1,%DISK ;IS IT A STRUCTURE ???
SKIPN S1,.UCBVL(T2) ;YES,,IS THERE A VOLUME MOUNTED ???
$RETT ;NO TO EITHER,,JUST RETURN
PUSHJ P,DELVOL ;YES,,DELETE THE VOLUME
$RETT ;AND RETURN
>
SUBTTL TAPDEV - TAPE STATUS MESSAGE PROCESSOR
;CALL: T1/ The .STSTS block address
; T2/ The UCB address
; T3/ The .TLSTA block address
;
;RET: Usually True
TOPS10 <
TAPDEV: PUSHJ P,.SAVE4 ;SAVE P1-P4
MOVE P1,T3 ;SAVE THE MESSAGE DATA ADDRESS
TAPD.1: MOVE P2,T2 ;SAVE THE UCB ADDRESS IN P2
SKIPN P3,.UCBVL(P2) ;CHECK AND LOAD THE VOL ADDRESS
JRST TAPD.2 ;NO VOLUME YET !!!
MOVE S1,P3 ;GET THE VOLUME ADDRESS IN S1
PUSHJ P,FNDOWN ;ANY OWNERS OF THE VOLUME ???
JUMPT [TXO P3,<1B0> ;YES,,INDICATE PREVIOUS VOL WAS OWNED
JRST TAPD.2 ] ; AND THEN GO CHECK LABEL TYPES
;NO -
SETZM .VLUCB(P3) ;DELINK THE VOLUME FROM THE UCB
SETZM .UCBVL(P2) ;DELINK THE UCB FROM THE VOLUME
MOVX S1,%STAWT ;GET VOLUME WAITING STATUS
STORE S1,.VLFLG(P3),VL.STA ; AND SET IT
MOVE S1,P3 ;AIM AT THE VOL BLK
PUSHJ P,DELVOL ;DELETE IT
SETZM P3 ;INDICATE NO VOLUME FOUND !!!
TAPD.2: LOAD S1,.STFLG(T1),TS.LAB ;GET THE MOUNTED VOL LABEL TYPE
PUSHJ P,GETLBT ;RECODE IT TO SOMETHING USEFULL
JUMPGE P3,[CAXE S1,%LABEL ;PREVIOUS VOL NOT OWNED AND CURRENT
JRST TAPD.8 ; VOL UNLABELED,,GEN A NEW VOL BLK
JRST TAPD.4 ] ; VOL LABELED,,FIND IN VOL DATA BASE
MOVE P4,S1 ;SAVE THE MOUNTED VOL LABEL TYPE
LOAD S1,.VLFLG(P3),VL.LBT ;GET THE PREVIOUS VOL LABEL TYPE
PUSHJ P,GETLBT ;RECODE IT TO SOMETHING USEFULL
CAMN S1,P4 ;PREVIOUS VOL OWNED,,CHECK LABEL TYPES
JRST [CAXE S1,%LABEL ;LABELS MATCH,,IS IT A LABELED VOL ???
JRST TAPD.A ;PREV VOL OWNED AND UNLABELED,,UPDATE
JRST TAPD.3 ] ;PREV VOL OWNED AND LABELED,,CHK VOL Q
LOAD S1,.VLFLG(P3),VL.LBT ;GET THE PREV VOL LABEL TYPE
$WTO (<Unloading>,<User requested ^T/@0(S1)/ labels>,MDAOBJ)
MOVE S1,.UCBNM(P2) ;GET THE UNIT NAME
PUSHJ P,UNLOAD ;UNLOAD THE UNIT
$RETT ;AND RETURN
;CONTINUED ON THE NEXT PAGE
;Here for a Labeled Volume Mount
TAPD.3: MOVE S1,.VLNAM(P3) ;GET THE VOLUME ID
CAMN S1,.TLVOL(P1) ;DO THEY MATCH ???
JRST TAPD.9 ;YES,,JUST UPDATE THE STATUS
$WTO (<Mount labeled volume ^W/S1/ on this drive>,,MDAOBJ)
MOVE S1,.UCBNM(P2) ;GET THE DEVICE THE VOL IS MOUNTED ON
PUSHJ P,UNLOAD ;UNLOAD THE DEVICE
$RETT ;AND RETURN
TAPD.4: SKIPN S1,.TLVOL(P1) ;GET THE VOLUME NAME
JRST TAPD.5 ;NULL,,THATS AN ERROR !!!
PUSHJ P,FNTAPE ;FIND IT IN OUR DATA BASE
JUMPF TAPD.8 ;NOT THERE,,CREATE A NEW VOL BLOCK
MOVE P3,S1 ;SAVE THE VOL BLOCK ADDRESS
JUMPE S2,TAPD.9 ;NOT MOUNTED,,LINK THIS VOL TO THE UCB
SKIPA ;SKIP OVER WTO
TAPD.5: $WTO (<No volume-ID found in this tapes labels>,,MDAOBJ) ;TELL OPR
MOVE S1,.UCBNM(P2) ;GET THE DEVICE THE VOL IS MOUNTED ON
PUSHJ P,UNLOAD ;UNLOAD THE DEVICE
$RETT ;RETURN
;We could not find the mounted volume in our volume list,
;so we will have to create an entry for it.
TAPD.8: PUSHJ P,CREVOL ;CREATE A VOL QUEUE ENTRY
MOVE P3,S1 ;SAVE THE ENTRY ADDRESS
MOVE S1,.TLVOL(P1) ;PICK UP THE VOLUME NAME
MOVEM S1,.VLNAM(P3) ;SAVE IT IN THE VOL ENTRY
SKIPN S1 ;IS THIS REALLY A VOL BLK?
JRST TAPD.9 ;NO NAME... NO RESOURCE NUMBER
MOVE S1,P1 ;AIM AT THIS NEW VOL BLK
PUSHJ P,D$TVRS ;GO GENERATE A RESOURCE NUMBER
;Having set everything up, link the VOL and UCB together
;and go finish updating the volume status
TAPD.9: HRRZM P3,.UCBVL(P2) ;LINK THE VOLUME TO THE UCB
MOVEM P2,.VLUCB(P3) ;LINK THE UCB TO THE VOLUME
;Update the volume status and tell the operator whats going on.
TAPD.A: LOAD S1,.STFLG(T1),ST.LOK ;GET THE WRITE LOCK STATUS
STORE S1,.UCBST(P2),UC.WLK ;SAVE THE WRITE LOCK STATUS
LOAD S1,.STFLG(T1),TS.DEN ;GET THE TAPE DENSITY
CAXLE S1,DENLEN ;VALIDATE THE RETURNED CODE
PUSHJ P,S..ITD ;DEEP TROUBLE !!!
MOVE S2,D$DEN(S1) ;CONVERT THE CODE TO A BIT MAP
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
CAXE S1,.TFD00 ;IS IT SYSTEM DEFAULT (UNREADABLE TAPE)
TDNE S2,.UCBST(P2) ;MUST BE A SUPPORTED DENSITY !!!
SKIPA ;DEFAULT, OR SUPPORTED DENSITY, GO ON
$STOP (ITD,Invalid Tape Density Specified for ^W/.UCBNM(P2)/)
STORE S1,.VLFLG(P3),VL.DEN ;OK,,SAVE THE VOLUME DENSITY
MOVE P4,S1 ;SAVE HERE ALSO FOR WTO
LOAD S1,.STFLG(T1),TS.LAB ;GET THE VOLUME LABEL TYPE
STORE S1,.VLFLG(P3),VL.LBT ;SAVE IT
MOVE P1,S1 ;HERE ALSO
;If Unlabeled,,Just Tell OPR Whats Going On
PUSHJ P,GETLBT ;RECODE THE LABEL TYPE
CAXE S1,%LABEL ;IS IT LABELED ???
JRST TAPD.B ;NO,,FINISH UP
;If Labeled,See is we can Give the Volume Away
MOVE S1,P2 ;GET UCB ADR
PUSHJ P,MATUNI ;TRY TO MATCH THIS UNIT WITH A REQUEST
JUMPT .RETT ;DONE, DON'T BOTHER THE OPERATOR
LOAD S1,.UCBST(P2),UC.WLK ;GET THE WRITE LOCKED BIT
$WTO (<Volume ^W/.VLNAM(P3)/ mounted>,<^T/@LABELS(P1)/ labels, ^T/@DENSTY(P4)/ BPI, write-^T/@WRTENA(S1)/>,MDAOBJ)
$RETT ;AND RETURN
TAPD.B: LOAD S1,.UCBST(P2),UC.WLK ;GET THE WRITE LOCKED BIT
$WTO (<Unlabeled volume mounted>,<Density ^T/@DENSTY(P4)/ BPI, write-^T/@WRTENA(S1)/>,MDAOBJ)
$RETT ;TELL OPR AND RETURN
>
SUBTTL DSKDEV - DISK STRUCTURE DEVICE STATUS MESSAGE PROCESSOR
;CALL: T1/ The .STSTS block address
; T2/ The UCB address
; T3/ The .DSSTA block address
;
;RET: Usually True
TOPS10 <
DSKDEV: PUSHJ P,.SAVE1 ;SAVE P1
SKIPN P1,.UCBVL(T2) ;CHECK AND LOAD ANY MOUNTED VOL ADDRESS
JRST DSKD.1 ;NONE THERE,,SKIP THIS
MOVE S1,.VLSTR(P1) ;GET THE MOUNTED STRUCTURE NAME
LOAD S2,.VLFLG(P1),VL.LUN ;AND GET ITS LOGICAL UNIT NUMBER
CAMN S1,.DSSNM(T3) ;DOES STRUCTURE NAME MATCH
CAME S2,.DSLUN(T3) ; AND ALSO LOGICAL UNIT NUMBER ???
SKIPA ;NO,,CONTINUE ON
JRST DSKD.8 ;YES,,JUST UPDATE THE VOLUME STATUS
MOVE S1,P1 ;GET THE VOL ADDRESS IN S1
DSKD.A: MOVE S2,S1 ;SAVE THE VOL ADDRESS IN S2
LOAD S1,.VLPTR(S2),VL.PRV ;FIND THE PRIMARY VOL BLOCK
JUMPN S1,DSKD.A ;NOT 0,,CONTINUE BACK CHAINING !!!
LOAD S1,.VLFLG(S2),VL.STA ;GET THE STRUCTURE STATUS
CAXN S1,%STAMN ;IS THE STRUCTURE MOUNTED ???
JRST DSK.10 ;YES,,WE HAVE AN ERROR !!!
DSKD.0: SETZM .VLUCB(P1) ;NOT MOUNTED,,ZAP THE VOL/UCB POINTER
SETZM .UCBVL(T2) ;ALSO ZAP THE UCB/VOL POINTER
MOVE S1,P1 ;GET THE VOL ADDRESS IN S1
PUSHJ P,DELVOL ;AND TRY TO DELETE THE VOL BLOCK(S)
DSKD.1: SKIPN S1,.DSHID(T3) ;GET THE VOLUME BLOCK ID
JRST DSK.11 ;NONE THERE,,UH OHHHHH !!!!
PUSHJ P,FNDDSK ;FIND IT IN THE VOL QUEUE
JUMPF [MOVE S1,.DSSNM(T3) ;NOT THERE,,GET THE STRUCTURE NAME
PUSHJ P,FNDISK ;TRY TO FIND THE PRI VOL BLOCK
JUMPF DSKD.4 ;NOT THERE,,CREATE A NEW VOL BLOCK
MOVE P1,S1 ;FOUND,,SAVE THE VOL ADDRESS
SKIPE .VLVID(P1) ;IS A VOLID PRESENT ???
JRST DSKD.4 ;YES,,CREATE A NEW VOL BLOCK
JRST DSKD.5 ] ;NO,,USE THIS VOL BLOCK
MOVE P1,S1 ;SAVE THE VOL BLOCK ADDRESS
MOVE S1,.VLSTR(P1) ;GET THE MOUNTED STRUCTURE NAME
LOAD S2,.VLFLG(P1),VL.LUN ;AND GET ITS LOGICAL UNIT NUMBER
CAMN S1,.DSSNM(T3) ;DOES STRUCTURE NAME MATCH
CAME S2,.DSLUN(T3) ; AND ALSO LOGICAL UNIT NUMBER ???
JRST DSKD.3 ;NO,,PROCESS DUPLICATE VOL BLK
PUSHJ P,FNDISK ;FIND ITS PRIMARY VOL BLOCK ADDRESS
JUMPF DSKD.2 ;NOT THERE,,SKIP MOUNTED CHECK
LOAD S1,.VLFLG(S1),VL.STA ;GET THE STRUCTURE STATUS
MOVE S2,.DSHID(T3) ;GET GET THE UNIT ID
CAIN S1,%STAMN ;MOUNTED?
CAME S2,.VLVID(P1) ;AND THE SAME UNIT ID?
JRST DSKD.2 ;NO PROBLEMS
JRST DSKD.9 ;YES,,THATS AN ERROR
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
DSKD.2: SKIPE S1,.VLUCB(P1) ;GET THE VOL UCB ADDRESS
SETZM .UCBVL(S1) ;ZAP THAT UNITS POINTER TO THE VOL BLK
JRST DSKD.7 ;AND CONTINUE
DSKD.3: SKIPN S1,.VLUCB(P1) ;IS THE DUPLICATE VOLUME MOUNTED ???
JRST DSKD.4 ;NO,,SKIP THIS
$WTO (<Warning: ^W/.VLVID(P1)/ is mounted on drive ^W/.UCBNM(S1)/>,,MDAOBJ)
MOVE S1,.UCBNM(S1) ;GET THE UNIT ON WHICH VOL IS MOUNTED
PUSHJ P,SNDREC ;REQUEST DEVICE STATUS FOR THE VOL
DSKD.4: PUSHJ P,CREVOL ;GO CREATE A VOL ENTRY FOR IT
MOVE P1,S1 ;SAVE THE NEW VOL ADDRESS
DSKD.5: MOVE S1,.DSHID(T3) ;GET THIS VOL'S VOLUME NAME
MOVEM S1,.VLVID(P1) ;SAVE IT
MOVE S1,.DSLUN(T3) ;GET THIS VOL'S LOGICAL UNIT NUMBER
STORE S1,.VLFLG(P1),VL.LUN ;SAVE IT
MOVE S1,.DSNXV(T3) ;GET THE NEXT VOLUME NAME
MOVEM S1,.VLNXT(P1) ;SAVE IT
MOVE S1,.DSSNM(T3) ;GET THE STRUCTURE NAME FOR THIS VOL
MOVEM S1,.VLSTR(P1) ;SAVE IT
MOVE S1,.DSPPN(T3) ;GET OWNER PPN
MOVEM S1,.VLOID(P1) ;SAVE IT
MOVX S1,%LABEL ;GET 'LABELED' LABEL TYPE
STORE S1,.VLFLG(P1),VL.LBT ;AND SET IT
DSKD.7: MOVEM P1,.UCBVL(T2) ;LINK THE VOL TO THE UCB
MOVEM T2,.VLUCB(P1) ;LINK THE UCB TO THE VOL
MOVE S1,.VLSTR(P1) ;GET THE STRUCTURE NAME
SKIPE .DSLUN(T3) ;THE THE FIRST UNIT IN THE STRUCTURE ??
JRST DSKD.8 ;NO, DON'T MAKE A RESOURCE NUMBER
STORE S1,.VLNAM(P1) ;YES,,SET THE STR NAME (PRIMARY VOL)
MOVE S1,P1 ;AIM AT THE STR VOL BLK
PUSHJ P,D$SVRS ;GENERATE A STRUCTURE RESOURCE NUMBER
DSKD.8: LOAD S1,.STFLG(T1),ST.LOK ;GET THE UNIT WRITE LOCK BIT
STORE S1,.UCBST(T2),UC.WLK ;SAVE IT
MOVEI S2,[ASCIZ ||] ;ASSUME WRITE ENABLED
SKIPE S1 ;WAS IT?
MOVEI S2,[ASCIZ |Unit is hardware write protected|]
$WTO (<Volume ^W/.VLVID(P1)/ for structure ^W/.DSSNM(T3)/ mounted>,<^T/(S2)/>,MDAOBJ)
MOVE S1,.VLSTR(P1) ;GET THE STRUCTURE NAME IN S1
SETZM S2 ;NO ALIAS...
SKIPE D$ASR ;IS AUTOMATIC STR RECOGNITION ENABLED ???
PUSHJ P,BLDSTR ;YES,,TRY TO BUILD A STR WITH WHAT WE HAVE
$RETT ;RETURN
DSKD.9: MOVE S2,.VLUCB(P1) ;GET THE VOLS UCB ADDRESS
$WTO (<Error - Can't mount volume ^W/.DSHID(T3)/ on this unit>,<The volume is already mounted on ^W/.UCBNM(S2)/>,MDAOBJ)
$RETT ;AND RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
DSK.10: $WTO (<Error - Can't mount volume ^W/.DSHID(T3)/ on this Unit>,<Volume ^W/.VLVID(P1)/ for structure ^W/.VLSTR(P1)/ is mounted on this unit>,MDAOBJ)
SKIPA ;SKIP OVER OTHER ERROR
DSK.11: $WTO (<Error - Pack on this unit has a null volume0-ID>,,MDAOBJ,<$WTFLG(WT.SJI)>)
MOVE S1,.UCBNM(T2) ;GET THE UNIT NAME
PUSHJ P,UNLOAD ;UNLOAD IT
$RETT ;AND RETURN
>
SUBTTL SETOWN - ROUTINE TO SET UP OWNERSHIP FOR A VSL
;CALL: S1/ The VSL Address
;
;RET: S1/ The VSL Address (True Always)
SETASK: TDZA TF,TF ;INDICATE 'SET MOUNT REQUESTED'
CLRASK: SETOM TF ;INDICATE 'CLEAR MOUNT REQUESTED'
MOVX S2,VL.ASK ;GET 'MOUNT REQUESTED' STATUS BIT
JRST COMMON ;CONTINUE
D$SETO:: ;MAKE 'SETOWN' GLOBAL
SETOWN: TDZA TF,TF ;INDICATE 'SET ASSIGNED'
CLROWN: SETOM TF ;INDICATE 'CLEAR ASSIGNED'
MOVX S2,VL.ASN ;GET THE 'ASSIGNED' STATUS BIT
SKIPN TF ;ARE WE SETTING THE BIT ???
TXO S2,VL.OWN ;YES,,ALSO LIGHT THE VOLUME OWNED BIT
COMMON: $SAVE <S1,P1,P2,P3> ;SAVE SOME ACS
MOVE P1,S1 ;SAVE THE VSL ADDRESS
MOVE P2,S2 ;SAVE THE BIT TO CLEAR/LITE
MOVE P3,TF ;SAVE THE SET/CLEAR FUNCTION CODE
PUSHJ P,CHKOWN ;LOCATE THIS GUYS VSL ADDR IN THE VOL
JUMPN P3,[ANDCAM P2,0(S1) ;IF CLEAR FUNCTION,,CLEAR THE BIT
SETZM .VSUCB(P1) ;ZAP THE UNIT POINTER
$RETT ] ;AND RETURN
IORM P2,0(S1) ;IF SET FUNCTION,,LITE THE BIT(S)
ZERO .VSFLG(P1),VS.NMT ;CLEAR THE PSEUDO MOUNTED STATUS BIT
TXNN P2,VL.ASN ;IF JUST 'ASKING' THEN
$RETT ;RETURN NOW
LOAD P3,.VSCVL(P1),VS.OFF ;GET THE CURRENT VOLUME OFFSET
ADDI P3,.VSVOL(P1) ;POINT TO THE VOL ADDRESS
MOVE P3,0(P3) ;GET THE VOL ADDRESS
MOVE P3,.VLUCB(P3) ;GET THE UNIT ADDRESS
MOVEM P3,.VSUCB(P1) ;AND LINK THE UCB TO THIS VSL
MOVX P2,VL.ASK ;GET THE 'ASK' BIT
ANDCAM P2,0(S1) ;AND CLEAR IT
$RETT ;RETURN
SUBTTL MNTVSL - ROUTINE TO ATTEMPT TO MOUNT A USERS REQUESTS
;CALL: S1/ The VSL Address
;
;RET: True Always
TOPS10<
D$MNTV:: ;MAKE IT GLOBAL
MNTVSL: PUSHJ P,.SAVE4 ;SAVE P1 & P2 & P3 & P4
$SAVE <AP,T3,T4> ;SAVE AP & T3 & T4 ALSO
STKVAR <NOACK,<VSLIST,^D20>,<MNTLST,^D40>> ;GEN A FLAG & SOME QUEUES
MOVE P4,S1 ;SAVE THE INITIAL VSL ADDRESS
MOVE AP,.VSMDR(P4) ;SETUP THE MDR ADDRESS
SETZM P3 ;INDICATE NORMAL MOUNT REQUEST
SETZM NOACK ;CLEAR NO ACK FLAG
MOVX S1,QE.WAM ;GET WAITING FOR MOUNT STATUS
LOAD S2,.MRJOB(AP),MD.PJB ;GET THE REQUEST JOB NUMBER
TXNE S2,BA%JOB ;IS THIS A PSEUDO REQUEST ???
SKIPN P3,.MRQEA(AP) ;YES,,PICK UP THE QE ADDRESS
SKIPA ;NOT A PSEUDO REQUEST,,SKIP
IORM S1,.QESEQ(P3) ;SET 'MOUNT WAIT' (CLEARED LATER)
MNTV.0: MOVEI T4,VSLIST ;GET THE PRIMARY VSL QUEUE ADDRESS
HRLI T4,-^D20 ;GEN THE PRIMARY VSL QUEUE STACK POINTER
PUSH T4,[-1] ;MARK END OF VSL QUEUE
MOVEI T3,MNTLST ;GET THE MOUNT VSL QUEUE ADDRESS
HRLI T3,-^D40 ;GEN MOUNT VSL QUEUE STACK POINTER
PUSH T3,[-1] ;MARK END OF VSL QUEUE
PUSH T3,[-1] ;HERE ALSO
LOAD P1,.MRCNT(AP),MR.CNT ;GET THE VSL REQUEST COUNT
LOAD P2,.VSRID(P4),VS.LNK ;GET THE VSL LINK CODE
MOVNS P1 ;NEGATE THE VSL COUNT
MOVSS P1 ;MOVE RIGHT TO LEFT
HRRI P1,.MRVSL(AP) ;CREATE VSL AOBJN AC
MNTV.1: MOVE S1,0(P1) ;GET A VSL ADDRESS
LOAD S2,.VSRID(S1),VS.LNK ;GET THE VSL LINK CODE
CAME S2,P2 ;DO THEY MATCH ???
JRST MNTV.2 ;NO,,TRY NEXT
MOVE S2,.VSFLG(S1) ;GET THE VSL FLAG BITS
TXNE S2,VS.ALC+VS.WAL ;JUST ALLOCATED OR AWAITING ALLOCATION ?
JRST [JUMPE P3,.RETF ;YES,,IF NOT A PSEUDO PROCESS - RETURN
MOVX S2,QE.WAM ;IF A PSEUDO PROCESS,,GET 'MOUNT WAIT'
ANDCAM S2,.QESEQ(P3) ; AND CLEAR IT
$RETF ] ;THEN RETURN
PUSH T4,S1 ;QUEUE UP THE VSL ADDRESS
LOAD S1,.VSFLG(S1),VS.TYP ;GET THE REQUEST TYPE
CAXN S1,%UNKN ;IS IT UNKNOWN ???
JRST [SETZM P2 ;YES,,ZAP VSL QUEUE PTR
JRST MNTV.8 ] ; AND EXIT
MNTV.2: AOBJN P1,MNTV.1 ;LOOK FOR ALL VSL'S WITH THAT LINK CODE
MOVE P2,T4 ;SAVE THE PRIMARY VSL QUEUE STACK PTR
;CONTINUED ON THE NEXT PAGE
;Here to perform deadlock avoidance check
MOVE S1,P4 ;GET THE INITIAL VSL ADDRESS BACK
SKIPN G$DEAD## ;DEADLOCK AVOIDANCE TURNED ON?
PUSHJ P,TELOPR ;NO,,ALWAYS TELL THE OPR ABOUT MOUNTS
MOVE S1,P4 ;GET BACK VSL ADDRESS IN CASE OF MDA
PUSHJ P,D$DLCK ;DO DEADLOCK CHECKING
JUMPF .RETF ;IF DEADLOCKED,,JUST RETURN
;Here to check to make sure we can mount ALL the required volumes
MNT.2A: POP T4,S1 ;GET A VSL ADDRESS OFF THE QUEUE
CAMN S1,[-1] ;END OF THE QUEUE ???
JRST MNT.2B ;YES,,CONTINUE ONWARD !!!
PUSHJ P,VSLCHK ;CAN WE MOUNT THIS VOLUME ???
JUMPF MNTV.9 ;NO - TELL THE OPERATOR
JUMPE S1,MNT.2A ;THAT VSL ALREADY MOUNTED,,TRY NEXT
JUMPL S1,MNTV.8 ;REQUIRED VOLUME NOT MOUNTED,,TELL OPR
PUSH T3,S1 ;QUEUE UP THE VSL ADDRESS
PUSH T3,S2 ;QUEUE UP THE UCB/VOL ADDRESS
JRST MNT.2A ;CONTINUE ON
;Now check to see if the pseudo process has been allocated
MNT.2B: JUMPE P3,MNTV.3 ;NOT A PSEUDO PROCESS,,CONTINUE
MOVX S1,QE.WAM ;GET 'WAITING FOR MOUNT' STATUS BIT
ANDCAM S1,.QESEQ(P3) ;CLEAR IT FOR THE PSEUDO PROCESS
MOVE S1,P3 ;GET THE QE ADDRESS IN S1
PUSHJ P,I$RALC## ;REQUEST ALLOCATION
;Try to mount the Volume(s)
MNTV.3: POP T3,S2 ;RESTORE A VOL/UCB ADDRESS
POP T3,S1 ;RESTORE A VSL ADDRESS
CAMN S1,[-1] ;END OF THE QUEUE ???
JRST MNTV.7 ;YES,,GO ACK THE USER
JUMPN P3,MNTV.4 ;IF A PSEUDO PROCESS,,GO MOUNT IT
LOAD P1,.VSFLG(S1),VS.TYP ;ELSE GET THE VOLUME TYPE
CAXN P1,%TAPE ;IS THIS A TAPE REQUEST ???
JRST MNTV.5 ;YES,,GO PROCESS IT
JRST MNTV.6 ;NO,,ASSUME %DISK
;Here to perform mounts for Pseudo Processes
MNTV.4: SETOM NOACK ;LITE 'DEFERED ACK' FLAG
DOSCHD ;FORCE A SCHEDULING PASS
MOVE P1,S1 ;SAVE THE VSL ADDRESS
PUSH P,S2 ;SAVE THE VOL/UCB ADDRESS
PUSHJ P,SETOWN ;SET VOLUME OWNERSHIP
POP P,S2 ;RESTORE THE VOL/UCB ADDRESS
MOVX S1,VS.NMT ;GET THE 'NOT REALLY MOUNTED' FLAG BIT
IORM S1,.VSFLG(P1) ;SET IT FOR THIS PSEUDO PROCESS
LOAD S1,.VSFLG(P1),VS.TYP ;GET THE VOLUME TYPE
CAXE S1,%TAPE ;IS IT TAPE ???
JRST MNTV.3 ;NO,,GET NEXT VSL
MOVEM S2,.VSUCB(P1) ;LINK THE UCB TO THIS USER
MOVEM P1,.UCBVS(S2) ;LINK THIS USER TO THIS DEVICE
JRST MNTV.3 ;GET THE NEXT VSL
;CONTINUED ON THE NEXT PAGE
;Here to mount tape volumes
MNTV.5: MOVE P1,S1 ;SAVE THE VSL ADDRESS
EXCH S1,S2 ;GET UCB ADDR IN S1, VSL IN S2
PUSHJ P,REASSIGN ;TRY TO REASSIGN THE DEVICE
JRST MNTV.3 ;CONTINUE
;Here to mount structures
MNTV.6: SETOM NOACK ;LITE 'DEFERED ACK' FLAG
PUSH P,S2 ;SAVE THE VOL ADDRESS
PUSHJ P,SETASK ;SET THE 'MOUNT REQUESTED' STATUS
POP P,S2 ;RESTORE THE VOL ADDRESS
PUSHJ P,ASLMSG ;GEN 'ADD TO SEARCH LIST' & SEND IT
JRST MNTV.3 ;CONTINUE
;Here to ack the user that his request has been satisfied
MNTV.7: SKIPE NOACK ;IS 'NO ACK' SET ???
$RETT ;YES,,RETURN
MOVE S1,P4 ;GET THE VSL ADDRESS BACK
PUSHJ P,ACKUSR ;NOTIFY THE USER
$RETT ;AND RETURN
MNTV.8: MOVE S1,P4 ;GET THE ORIGIONAL VSL ADDRESS
SKIPE G$DEAD## ;DEADLOCK AVOIDANCE TURNED ON?
PUSHJ P,TELOPR ;ASK THE OPR TO MOUNT THE DEVICES
JUMPE P2,.RETF ;NO VSL QUEUE,,EXIT NOW
MNTV.9: POP P2,S1 ;PICK UP THE VSL ADDRESS OFF THE QUEUE
CAMN S1,[-1] ;END OF THE QUEUE ???
$RETF ;YES,,RETURN
PUSHJ P,RETA%C ;RETURN THE 'A' AND 'C' MATRIX ENTRIES
JRST MNTV.9 ;CONTINUE FOR ALL VSL'S
> ;END TOPS10 CONDITIONAL
SUBTTL MNTVSR - ROUTINE TO MOUNT A VOLUME AT VOLUME SWITCH TIME
;CALL: S1/ The VSL Address
;
;RET: True if the mount wins, False otherwise
TOPS10<
MNTVSR: $SAVE <AP,P1,P2> ;SAVE AP AND P1 & P2 FOR A SECOND
MOVE AP,.VSMDR(S1) ;SETUP A NEW MDR POINTER
MOVE P1,S1 ;SAVE THE VSL ADDRESS
PUSHJ P,D$CMTX ;LOCATE THIS GUYS 'C' MATRIX ENTRY
LOAD S1,.VSCVL(P1),VS.OFF ;GET THE OFFSET TO THE CURRENT VOLUME
ADDI S1,.VSVOL(P1) ;POINT TO THE CURRENT VOL ADDRESS
MOVE S1,0(S1) ;GET THE CURRENT VOL ADDRESS
PUSHJ P,D$TVRS ;CONVERT TO A RESOURCE NUMBER
MOVE P2,S1 ;SAVE THE RSN FOR LATER IF WE NEED IT
MOVE S2,P1 ;GET THE VSL ADDRESS IN S2
PUSHJ P,ADDAMA ;CLAIM THIS RESOURCE IN 'A' MATRIX
PUSHJ P,ADDCMA ;CLAIM THIS RESOURCE IN 'C' MATRIX
PUSHJ P,DEADLK ;DEADLOCK CHECK THE WORLD !!!
JUMPF TVSR.1 ;TOUGH NOUGEEEES !!!
MOVE S1,P1 ;GET THE VSL ADDRESS IN S1
PUSHJ P,VSLCHK ;CAN WE MOUNT THE VOLUME ???
JUMPF TVSR.1 ;NO,,THIS GUY JUST CAN'T WIN !!!
JUMPE S1,.RETT ;SHOULD NOT HAPPEN !!!
JUMPL S1,TVSR.0 ;NOT MOUNTED,,TELL OPR TO MOUNT IT
EXCH S1,S2 ;GET UCB ADDR IN S1, VSL ADDR IN S2
PUSHJ P,REASSIGN ;REASSIGN THE VOLUME
$RETT ;RETURN
TVSR.0: MOVE S1,P1 ;GET THE VSL ADDRESS IN S1
PUSHJ P,TELOPR ;TELL THE OPR TO MOUNT THE VOLUME
TVSR.1: MOVE S1,P2 ;GET THE VOLUME RSN BACK
MOVE S2,P1 ;GET THE VSL ADDRESS BACK
PUSHJ P,SUBAMA ;DELETE THE CLAIM FROM THE 'A' MATRIX
PUSHJ P,SUBCMA ;DELETE THE CLAIM FROM THE 'C' MATRIX
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL VSLCHK - ROUTINE TO TRY TO MOUNT A VOLUME FROM THE VSL
;CALL: S1/ The VSL Address
;
;RET: S1/ The VSL Address if %TAPE
; S2/ The UCB Address if %TAPE
;
; S1/ The VSL Address if %DISK
; S2/ The VOL Address if %DISK
;
;Error Return Codes:
;
; S1/ 0 If the User Already has the Volume Mounted
; S1/ -1 If the requested volume needs mounting
TOPS10<
VSLCHK: PUSHJ P,.SAVE3 ;SAVE P1 TO P3
MOVE P2,S1 ;SAVE THE VSL ADDRESS
LOAD S1,.VSCVL(P2),VS.OFF ;GET THE OFFSET TO THE CURRENT VOLUME
ADDI S1,.VSVOL(P2) ;POINT TO THE CURR VOL ADDRESS
MOVE P1,0(S1) ;GET THE CURRENT VOLUME ADDRESS
SKIPN P3,.VLUCB(P1) ;CHECK AND LOAD THE UCB ADDRESS
JRST [SETOM S1 ;NOT MOUNTED,,SET RETURN CODE
$RETT ] ; AND EXIT
MOVE S2,.UCBNM(P3) ;GET THE UNIT NAME
MOVEM S2,MDAOBJ+OBJ.UN ;SAVE IT IN THE MDA OBJECT BLOCK
LOAD S1,.VSFLG(P2),VS.NMT ;GET THE PSEUDO MOUNTED FLAG BIT
JUMPE S1,VSLC.1 ;NOT CURRENTLY MOUNTED,,SKIP THIS
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE JOB NUMBER
TXNN S1,BA%JOB ;STILL A PSEUDO PROCESS ???
JRST VSLC.5 ;NO,,MOUNT IT FOR REAL !!!!
SETZM S1 ;YES,,SET 'MOUNTED' RETURN CODE
$RETT ;AND RETURN NOW
VSLC.1: LOAD S1,.VSFLG(P2),VS.TYP ;GET REQUEST TYPE
CAXN S1,%DISK ;DISK REQUEST?
JRST VSLC.6 ;YES - DON'T CHECK OWNERSHIP
MOVE S1,P2 ;GET THE VSL ADDRESS IN S1
PUSHJ P,CHKOWN ;DOES THIS GUY OWN THE VOLUME ???
JUMPT [SETZM S1 ;YES,,SET 'MOUNTED' RETURN CODE
$RETT ] ;AND RETURN
VSLC.2: LOAD S1,.VSFLG(P2),VS.TYP ;GET THE VOLUME SET TYPE
CAXE S1,%TAPE ;IS IT A TAPE REQUEST ???
JRST VSLC.6 ;NO,,TRY DISK
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here to process Tape Requests
LOAD S1,.VSFLG(P2),VS.VSW ;IS THIS VSL IN VOLUME SWITCH ???
JUMPN S1,VSLC.3 ;YES,,SKIP LABEL CHECK
LOAD S1,.VLFLG(P1),VL.LBT ;GET THE MOUNTED VOL LABEL TYPE
PUSHJ P,GETLBT ;RECODE IT TO SOMETHING UNDERSTANDABLE
CAXE S1,%LABEL ;IS IT LABELED ???
$RETF ;NO,,RETURN
VSLC.3: MOVE S1,P1 ;GET THE VOL ADDRESS IN S1
PUSHJ P,FNDOWN ;IS THE VOLUME OWNED ???
JUMPT .RETF ;YES,,RETURN
VSLC.4: DMOVE S1,P1 ;GET VOL ADDR IN S1, VSL ADDR IN S2
PUSHJ P,CVLVSB ;GO CHECK DEVICE ATTRIBUTES
JUMPF .RETF ;NO MATCH,,RETURN
LOAD S1,.UCBST(P3),UC.VSW ;ARE WE SWITCHING VOLUMES ON THIS UNIT ?
JUMPE S1,VSLC.5 ;NO,,SKIP THIS
CAME P2,.UCBVS(P3) ;DOES THIS USER OWN THE UNIT ???
$RETF ;NO,,RETURN
VSLC.5: MOVE S1,P2 ;GET THE VSL ADDRESS IN S1
LOAD S2,.VSFLG(P2),VS.TYP ;GET THE REQUEST TYPE
CAXE S2,%TAPE ;IS IT A STRUCTURE REQUEST ???
MOVE P3,.UCBVL(P3) ;YES,,LOAD UP THE VOL BLOCK ADDRESS
MOVE S2,P3 ;GET THE UCB OR VOL ADDRESS IN S2
$RETT ;RETURN OK
;Here to process Disk requests
VSLC.6: CAXE S1,%DISK ;IS THIS A DISK REQUEST ???
$RETF ;NO,,RETURN
LOAD S1,.VLFLG(P1),VL.STA ;GET THE STRUCTURE STATUS
LOAD S2,.VLFLG(P1),VL.LCK ;GET THE STR LOCK STATUS
CAIN S1,%STAWT ;IS IT WAITING TO BE MOUNTED?
JRST [MOVX S1,-1 ;YES - SET RETURN CODE
$RETT] ;AND RETURN
CAXN S1,%STAMN ;MUST BE MOUNTED AND
CAXN S2,%LOCKD ; NOT LOCKED
SKIPA ; OR NOT LOCKED
CAXN S2,%ULCKP ; WITH A PENDING UNLOCK
$RETF ;IF SO,,THATS NO GOOD !!!
MOVE S1,P2 ;GET THE VSL ADDRESS
MOVE S2,P1 ;GET THE VOL ADDRESS
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL MATUNI - ROUTINE TO GIVE A VOLUME TO ANY VALID REQUESTOR
;CALL: S1/ The UCB Address of the unit on which the volume is mounted
;
;RET: True Always
TOPS10<
MATUNI: PUSHJ P,.SAVE3 ;SAVE P1& P2 & P3 FOR A SECOND
SKIPN P2,.UCBVL(S1) ;CHECK AND LOAD THE VOL BLOCK ADDRESS
$RETF ;SHOULD NOT HAPPEN
LOAD P1,.VLOWN(P2),VL.CNT ;GET THE REQUEST COUNT
JUMPE P1,.RETF ;NONE THERE,,RETURN
MOVNS P1 ;NEGATE IT
MOVSS P1 ;MOVE RIGHT TO LEFT
HRRI P1,.VLVSL(P2) ;GEN VSL SEARCH AOBJN AC
LOAD S1,.UCBST(S1),UC.DVT ;GET THE DEVICE TYPE
CAXE S1,%TAPE ;IS IT A TAPE REQUEST ???
JRST MATU.2 ;NO,,TRY DISK
;Here to try to satisfy tape mount requests
MATU.0: MOVE S1,0(P1) ;GET A VSL ADDRESS
LOAD S2,.VSCVL(S1),VS.OFF ;GET THE CURRENT VOLUME OFFSET
ADDI S2,.VSVOL(S1) ;POINT TO THE CURRENT VOL ADDRESS
CAMN P2,0(S2) ;IS HE POINTING AT THIS VOL BLOCK ???
TXNE S1,VL.ASN ;OR DOES HE ALREADY HAVE IT ASSIGNED ??
JRST MATU.1 ;ALREADY ASSGNED OR WRONG VOL,,SKIP THIS
HRRZS S1 ;GET ONLY THE VSL ADDRESS (CLEAR FLAGS)
LOAD P3,.VSFLG(S1),VS.VSW ;GET THE VOLUME SWITCH STATUS
SKIPE P3 ;ARE WE SWITCHING VOLUMES ???
PUSHJ P,MNTVSR ;YES,,GO PROCESS IT
SKIPN P3 ;ARE WE SWITCHING VOLUMES ???
PUSHJ P,MNTVSL ;NO,,TRY GENERAL MOUNT
JUMPT .RETT ;WIN,,RETURN
MATU.1: AOBJN P1,MATU.0 ;NO GO,,TRY NEXT VSL
$RETF ;CAN'T,,JUST RETURN
;Here to try to satisfy structure mount requests
MATU.2: MOVE S1,0(P1) ;GET A VSL ADDRESS
TXNN S1,VL.ASK+VL.ASN ;ASSIGNED OR PENDING ???
JRST [HRRZS S1 ;GET ONLY THE VSL ADDRESS (CLEAR FLAGS)
PUSHJ P,MNTVSL ;TRY TO MOUNT IT FOR THIS USER
JRST MATU.3 ] ;AND CONTINUE
MATU.3: AOBJN P1,MATU.2 ;CHECK THROUGH ALL VSL'S
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL CVLVSL - Compare Volume with Volume Set
;This routine will check the user requested attributes of the
; mount request with the attributes of a particular mounted volume
; The caller must make sure that the volume is free to be
; reassigned to the user should the attributes match.
;
;CALL: S1/ addr of VOL block
; S2/ addr of VSL block
;RET: TRUE, if all the attributes match, FALSE if they don't
; Alternate entry at CVLVSB which will not match bypass requests
TOPS10<
CVLVSB: LOAD TF,.VSFLG(S2),VS.LBT ;GET THE REQUESTED LABEL TYPE
CAXN TF,.TFLBP ;BYPASS REQUESTED?
$ERJMP MD$URB,S2 ;YES,,MUST COME THROUGH IDENTIFY
CVLVSL: $SAVE <P1,P2,P3>
DMOVE P1,S1 ;COPY THE VOL, AND VSL PTRS
SKIPN P3,.VLUCB(P1) ;GET THE UNIT BLOCK
$ERJMP MD$NVM,P2 ;SHOULD NOT HAPPEN !!!
;Check the state of the write-ring against the user request
LOAD S1,.UCBST(P3),UC.WLK ;GET THE LOCK BIT FOR THIS VOLUME
LOAD S2,.VSFLG(P2),VS.WLK ;GET THE ENABLE BIT FOR THE REQUEST
CAME S1,S2 ;DO THEY MATCH ???
PJRST [SKIPE S2 ;S2 NOT EQUAL TO 0,,WRITE LOCKED
$ERJMP MD$URW,P2 ;SO TELL THE OPERATOR
$ERJMP MD$URE,P2 ] ;ELSE USER WANTS WRITE ENABLED
;Check for conflicting label types
LOAD S1,.VSFLG(P2),VS.LBT ;GET REQUESTED LABEL TYPE
CAXN S1,.TFLNV ;IS IT NO LABELS/NO EOV PROCESSING ???
MOVX S1,.TFLNL ;YES,,MAKE IT NO LABELS, PERIOD !
LOAD S2,.VLFLG(P1),VL.LBT ;GET LABEL TYPE OF THIS VOLUME
CAXN S2,.TFLNV ;IS IT NO LABELS/NO EOV PROCESSING ???
MOVX S2,.TFLNL ;YES,,MAKE IT NO LABELS, PERIOD !
CAME S1,S2 ;MATCH?
CAXN S1,.TFLBP ;NO, BUT ASKING FOR BYPASS LABELS?
SKIPA ;MATCH.. OR REQUESTING BLP, WIN
JRST [CAXN S1,.TFLNL ;USER WANTED UNLABELED?
$ERJMP MD$VIL,P2 ;NO,,VOLUME IS LABELED !!!
$ERJMP MD$URL,P2 ] ;YES,,COMPLAIN ABOUT THAT !!!
DMOVE S1,P2 ;GET VSL IN S1, UCB IN S2
PUSHJ P,D$MODR ;CHECK TRACK/DENSITY REQUIREMENTS
JUMPF .RETF ;NO GOOD,,RETURN
$RETT ;ELSE OK
>;END TOPS10
SUBTTL CHKOWN - ROUTINE TO CHECK IF A USER OWNS A VOLUME
;CALL: S1/ The VSL Address
;
;RET: S1/ The VOL block pointer to the VSL address
D$FOWN:: ;GLOBALIZE IT
CHKOWN: LOAD S2,.VSCVL(S1),VS.OFF ;GET THE OFFSET TO THE CURRENT VOLUME
ADDI S2,.VSVOL(S1) ;POINT TO THE OFFSET
MOVE S2,0(S2) ;GET THE VOL BLOCK ADDRESS
EXCH S1,S2 ;WANT S1=VOL ADDR, S2=VSL ADDR
PUSH P,S2 ;SAVE THE VSL ADDRESS
LOAD S2,.VLOWN(S1),VL.CNT ;GET THE VOLUME REQUEST COUNT
MOVNS S2 ;NEGATE IT
MOVSS S2 ;MOVE RIGHT TO LEFT
HRRI S2,.VLVSL(S1) ;CREATE AOBJN AC FOR VSL ADDR SEARCH
MOVE S1,S2 ;GET THE POINTER IN S1
POP P,S2 ;GET THE VSL ADDRESS BACK
CHKO.1: CAIN S2,@0(S1) ;FIND THE USERS VSL ADDR IN THE VOL LIST
JRST [MOVX S2,VL.ASK+VL.ASN ;FOUND,,GET REQUEST+ASSIGNED BITS
TDNE S2,0(S1) ;IF LIT,,THIS GUY WAS ALREADY PROCESSED
$RETT ;RETURN VOLUME OWNED
$RETF ] ;RETURN VOLUME NOT OWNED
AOBJN S1,CHKO.1 ;NOT THIS ONE,,TRY NEXT
$STOP (IVV,Invalid VSL/VOL Forward/Backchain Pointers) ;NOT FOUND !!!
SUBTTL D$UNLOAD - ROUTINE TO UNLOAD A TAPE DRIVE
;CALL: M/ The Unload Message Address
;
;RET: True Always
TOPS10 <
D$UNLO: PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
MOVX S1,.TAPDV ;GET THE DRIVE BLOCK TYPE CODE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF E$IMO## ;INVALID ORION MESSAGE SENT !!!
PUSHJ P,FNDUCB ;FIND THE AFFECTED UCB
JUMPF .RETF ;NOT THERE,,THATS AN ERROR
MOVE P1,S1 ;SAVE THE UCB ADDRESS IN P1
MOVE S1,.UCBNM(P1) ;GET THE DEVICE NAME IN S1
SKIPN S2,.UCBVL(P1) ;CHECK AND LOAD THE VOLUME ADDRESS
PJRST UNLOAD ;NO VOLUME ON IT,,JUST SEND THE MSG
LOAD S1,.UCBST(P1),UC.VSW ;IS THIS UNIT IN VOLUME SWITCH MODE ??
JUMPN S1,UNLO.1 ;YES,,OK TO UNLOAD THE TAPE !!!
MOVE S1,S2 ;GET THE VOLUME ADDRESS IN S1
PUSHJ P,FNDOWN ;ANY OWNERS FOR THIS VOLUME ???
SKIPF ;NO,,SKIP
$ERJMP MD$VAU ;YES,,CAN THE REQUEST
UNLO.1: $ACK (<Unloading>,,MDAOBJ,.MSCOD(M)) ;TELL THE OPERATOR
MOVE S1,.UCBVL(P1) ;POINT AT THIS VOLUME
PJRST VLUNLOAD ;AND DELINK ALL THE GOOD STUFF
>;END TOPS10
SUBTTL D$DISMOUNT - STRUCTURE DISMOUNT PROCESSOR
;CALL: M/ The Dismount Message Address
;
;RET: True Always
TOPS10 <
D$DISM: PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
MOVX S1,.STRDV ;GET THE STRUCTURE DEVICE BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF E$IMO## ;NOT THERE,,THATS AN ERROR
HRROI S1,0(S1) ;GET POINTER TO ASCIZ STRUCTURE NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
MOVE S1,S2 ;PUT IT IN S1
MOVE P1,S1 ;HERE ALSO
PUSHJ P,FNDISK ;FIND THE VOLUME IN THE VOL BLOCK
JUMPF DISM.2 ;NOT THERE,,THATS AN ERROR
LOAD S2,.VLFLG(S1),VL.STA ;GET THE STRUCTURE STATUS BITS
CAXE S2,%STAMN ;IS IT MOUNTED ???
JRST DISM.1 ;NO,,THATS AN ERROR
MOVX S2,%STADM ;GET THE DISMOUNT STRUCTURE STATUS BITS
STORE S2,.VLFLG(S1),VL.STA ;SET IT IN STRUCTURE BLOCK
LOAD S2,.OFLAG(M),.DMRMV ;GET THE /REMOVE BIT
STORE S2,.VLFLG(S1),VL.REM ;AND SAVE IT
MOVX S2,.DMNCK ;GET THE /NOCHECK FLAG BIT
TDNN S2,.OFLAG(M) ;DID HE SPECIFY NO CHECK ???
SETZM S2 ;NO,,CLEAR IT !!!
PUSHJ P,SNDDSM ;SEND DISMOUNT MESSAGE TO TAPE LABELER
$RETT ;RETURN
DISM.1: $ACK (Structure ^W/P1/ is not mounted,,,.MSCOD(M),<$WTFLG(WT.SJI)>)
$RETT ;RETURN
DISM.2: $ACK (Structure ^W/P1/ does not exist,,,.MSCOD(M),<$WTFLG(WT.SJI)>)
$RETT ;RETURN
>
SUBTTL VLUNLOAD - Unload a unit and break UCB-VOL links
;CALL: S1/ The Volume Block Address
;
;RET: True Always
;This routine will break the VOL - UCB links and request PULSAR
; to unload the drive. In addition, if there are no more
; requestors for the volume, the volume block is deleted.
; Alternate entry - VLBREAK which just breaks the
; UCB - VOL link, but does not unload.
TOPS10<
VLBREAK: TDZA S2,S2 ;INDICATE 'JUST BREAK' ENTRY
VLUNLO: MOVEI S2,1 ;INDICATE 'BREAK AND UNLOAD ENTRY'
$SAVE <P1> ;SAVE P1 FOR A SECOND
MOVE P1,S2 ;SAVE THE ENTRY FLAG
MOVE S2,.VLUCB(S1) ;GET THE UCB ADDRESS IN S2
ZERO .UCBVL(S2) ;DELINK UCB FROM THE VOL
ZERO .VLUCB(S1) ;DELINK THE VOL FROM THE UCB
MOVX TF,UC.OFL ;GET 'DEVICE OFFLINE' BIT
IORM TF,.UCBST(S2) ;LITE IT IN THE UCB
MOVX TF,%STAWT ;GET VOLUME WAITING STATUS CODE
STORE TF,.VLFLG(S1),VL.STA ;AND SET IT
LOAD TF,.VLOWN(S1),VL.CNT ;GET THE NUMBER OF REMAINING REQUESTORS
EXCH S1,S2 ;GET S1=UCB, S2=VOL ADDRESS
MOVE S1,.UCBNM(S1) ;GET THE NAME OF THE UNIT
JUMPN TF,VLUN.1 ;ANY MORE REQUESTORS ?? YES, KEEP VOL
PUSH P,S1 ;SAVE UNIT NAME
MOVE S1,S2 ;GET THE VOL ADDRESS IN S1
PUSHJ P,DELVOL ;AND DELETE THE VOLUME
POP P,S1 ;GET BACK UNIT NAME
VLUN.1: JUMPE P1,.RETT ;IF VLBREAK ENTRY, QUIT
PJRST UNLOAD ;IF VLUNLO ENTRY, GO UNLOAD THE TAPE
>;END TOPS10
SUBTTL D$DELETE - ROUTINE TO DELETE REQUESTS FROM THE MOUNT QUEUE
;CALL: M/ The Delete Message Address
;
;RET: True if deleted, False otherwise
TOPS10 <
D$DELE: PUSHJ P,.SAVE4 ;SAVE P1 - P4
MOVX S1,.ORREA ;GET THE REASON BLOCK TYPE
SETZM P4 ;DEFAULT TO NO REASON BLOCK
PUSHJ P,A$FNDB## ;FIND IT
SKIPF ;LOSE,,SKIP
MOVE P4,S1 ;SAVE THE REASON BLOCK ADDRESS
MOVEI P1,1 ;GET THE BLOCK COUNT
DELZ.1: MOVE S1,[EXP .ORREQ,.STRDV,](P1) ;GET THE BLK TYPE
PUSHJ P,A$FNDB## ;FIND IT
JUMPT @[EXP DELRID,DELSTR](P1) ;FOUND,,PROCESS IT
SOJGE P1,DELZ.1 ;NOT FOUND,,TRY NEXT
SETZM MDAOBJ+OBJ.UN ;ZAP THE UNIT WORD OF MDA OBJECT BLK
PJRST E$IMO## ;RETURN INVALID MESSAGE FROM ORION
;Routine to delete a mount request by request ID
DELRID: MOVE S1,0(S1) ;GET THE REQUEST ID
CAMN S1,[-1] ;IS THIS ALL REQUESTS ???
JRST DELALL ;YES,,OK YOU ASKED FOR IT !!!
MOVE P1,S1 ;NO,,SAVE IT
PUSHJ P,FNDVSL ;LOCATE THE REQUEST
JUMPF DELD.1 ;NOT THERE,,RETURN AN ERROR
MOVE P1,S1 ;SAVE THE VSL ADDRESS
PUSHJ P,CHKOWN ;DOES HE ALREADY OWN THE VOLUME ???
JUMPT DELD.0 ;YES,,CAN'T DO THIS
MOVE S1,P1 ;GET THE VSL ADDRESS BACK
PUSHJ P,DELREQ ;DELETE THE REQUEST
$RET ;AND RETURN
DELD.0: LOAD P1,.VSRID(P1),VS.RID ;PICK UP THE REQUEST ID
DELD.1: $ACK (<Mount request #^D/P1/ does not exist>,,,.MSCOD(M))
$RETT ;RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Routine to delete all pending mount requests
DELALL: MOVE S1,VSLQUE ;GET THE VSL QUEUE ID
PUSHJ P,L%FIRST ;GET THE FIRST
JRST DELA.2 ;JUMP THE FIRST TIME THROUGH
DELA.1: MOVE S1,VSLQUE ;GET THE VSL QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT ENTRY
DELA.2: JUMPF .RETT ;DONE,,RETURN
MOVE P1,S2 ;SAVE THE VSL ADDRESS
LOAD S1,.VSFLG(P1),VS.NMT ;GET THE PSEUDO MOUNTED FLAG BIT
JUMPN S1,DELA.1 ;IF SET,,GET NEXT VSL
MOVE S1,P1 ;GET THE VSL ADDRESS IN S1
PUSHJ P,CHKOWN ;DOES THIS GUY OWN THIS VOLUME ???
JUMPT DELA.1 ;YES,,GET THE NEXT VSL
MOVE S1,P1 ;NO,,GET THE VSL ADDRESS IN S1
PUSHJ P,DELREQ ;DELETE THE REQUEST
JRST DELA.1 ;AND GO GET ANOTHER
;Routine to delete all requests for a specific structure
DELSTR: HRROI S1,0(S1) ;GET THE STRUCTURE NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
MOVEM S2,MDAOBJ+OBJ.UN ;SAVE IT
MOVE S1,S2 ;GET IT IN S1
PUSHJ P,D$FNDV ;LOCATE IT
JUMPF E$NSD## ;NOT THERE,,RETURN NO SUCH DEVICE
MOVE P1,S1 ;SAVE THE VOL ADDRESS
SETZM P3 ;CLEAR REQUEST DELETION COUNTER
DELS.1: LOAD P2,.VLOWN(P1),VL.CNT ;GET THE REQUESTOR COUNT
JUMPE P2,DELS.3 ;NO MORE,,FINISH UP
MOVNS P2 ;NEGATE IT
MOVSS P2 ;MOVE RIGHT TO LEFT
HRRI P2,.VLVSL(P1) ;CREATE AOBJN SEARCH AC
DELS.2: MOVE S1,0(P2) ;GET A REQUESTED VSL
TXNN S1,VL.ASN+VL.ASK ;ASSIGNED OR REQUESTED ???
JRST [PUSHJ P,DELREQ ;NO,,DELETE IT !!!
AOS P3 ;BUMP DELETION COUNTER
JRST DELS.1 ] ;START OVER
AOBJN P2,DELS.2 ;TRY NEXT REQUESTOR
DELS.3: JUMPN P3,.RETT ;DELETED SOME,,RETURN
$ACK (No requests for this structure deleted,,MDAOBJ,.MSCOD(M))
$RETT ;RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Routine to delete the VSL pointed to by S1
DELREQ: PUSHJ P,.SAVE1 ;SAVE P1
MOVEI P1,(S1) ;SAVE THE VSL ADDRESS
MOVE AP,.VSMDR(P1) ;SETUP THE MDR ADDRESS
DOSCHD ;FORCE A SCHEDEULING PASS
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE PROCESS JOB NUMBER
TXC S1,BA%JOB ;SWAP REQUEST STATES
TXNE S1,BA%JOB ;IS THIS A REAL REQUEST ???
$ACK (<Mount request #^D/.VSRID(P1),VS.RID/ cancelled>,<^I/DEMO/^M^JVolume-set-name: ^T/.VSVSN(P1)/>,,.MSCOD(M))
TXNN S1,BA%JOB ;IS IT A PSEUDO PROCESS ???
$ACK (<Mount request #^D/.VSRID(P1),VS.RID/ cancelled>,<User: [SYSTEM] for ^15/.MRFLG(AP),MR.QUE/ Request #^D/S1/^M^JVolume-set-name: ^T/.VSVSN(P1)/>,,.MSCOD(M))
MOVE S1,[POINT 7,G$MSG] ;GET A FRESH BUFFER POINTER
MOVEM S1,MDBPTR ;SAVE FOR TEXT OUTPUT ROUTINE
LOAD S1,.VSFLG(P1),VS.VSW ;SWITCHING VOLUMES ????
JUMPN S1,DELVSW ;YES,,PROCESS DIFFERENTLY !!!
$TEXT (MDADBP,<Mount request ^T/.VSVSN(P1)/ canceled by the operator^A>)
SKIPE P4 ;NO REASON,,SKIP
$TEXT (MDADBP,<^M^JReason:^T/0(P4)/^A>) ;ADD THE REASON
SETZM S1 ;GET A NULL BYTE
IDPB S1,MDBPTR ;MAKE THE MESSAGE TEXT ASCIZ
SETOM ERRACK ;INDICATE THIS IS AN ERROR ACK
PUSHJ P,USRNOT ;TELL THE SAD STORY TO THE USER
MOVE S1,P1 ;GET THE VSL ADDRESS
LOAD P1,.VSRID(P1),VS.LNK ;GET THIS VSL'S LINK CODE
PUSHJ P,DELVSL ;DELETE THIS REQUEST
LOAD S2,.MRCNT(AP),MR.CNT ;GET THE USERS REQUEST COUNT
JUMPE S2,DELMDR ;NOTHING LEFT,,DELETE THE MDR
MOVNS S2 ;NEGATE IT
MOVSS S2 ;MOVE RIGHT TO LEFT
HRRI S2,.MRVSL(AP) ;CREATE VSL AOBJN SEARCH AC
DELR.1: MOVE S1,0(S2) ;GET A VSL ADDRESS
LOAD TF,.VSRID(S1),VS.LNK ;GET ITS LINK CODE
CAMN TF,P1 ;DOES IT MATCH THE ONE WE CANCELED ???
PJRST MNTVSL ;YES,,RETRY THE MOUNT
AOBJN S2,DELR.1 ;NO,,TRY NEXT VSL
$RETT ;AND RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here if user was switching volumes
DELVSW: $TEXT (MDADBP,<Volume switch request ^T/.VSVSN(P1)/ canceled by the operator^A>)
SKIPE P4 ;NO REASON,,SKIP
$TEXT (MDADBP,<^M^JReason:^T/0(P4)/^A>) ;ADD THE REASON
SETZM S1 ;GET A NULL BYTE
IDPB S1,MDBPTR ;MAKE THE MESSAGE TEXT ASCIZ
SETOM ERRACK ;INDICATE THIS IS AN ERROR ACK
PUSHJ P,USRNOT ;TELL THE SAD STORY TO THE USER
MOVE S1,.VSUCB(P1) ;GET THE UNIT HE CURRENTLY OWNS
MOVE S2,.VSFLG(P1) ;GET THE VSL FLAG BITS
TXZ S2,VS.VSW ;NO SWITCHING VOLS
TXO S2,VS.ABO ;ABORTED BY THE OPERATOR
MOVEM S2,.VSFLG(P1) ;SAVE THE NEW STATUS
MOVX S2,UC.VSW ;GET UNIT VOL SWITCH STATUS
ANDCAM S2,.UCBST(S1) ;CLEAR IT
MOVX S2,%VABT ;GET 'CANCELLED' STATUS
PUSHJ P,VSREOV ;GET USER OUT OF 'EW'
LOAD S1,.VSCVL(P1),VS.OFF ;GET THE OFFSET TO THE CURRENT VOLUME
ADDI S1,.VSVOL(P1) ;POINT OT THE VOL BLOCK ADDRESS
MOVE S2,0(S1) ;GET THE VOL BLOCK ADDRESS
SETZM 0(S1) ;ZAP THE VOL BLOCK ADDRESS
DECR .VSCVL(P1),VS.CNT ;SUBTRACT 1 FROM VOLUME COUNT
DECR .VSCVL(P1),VS.OFF ;POINT TO THE PREVIOUS VOLUME
MOVE S1,VOLQUE ;GET THE VOL QUEUE ID
PUSHJ P,L%APOS ;POSITION TO THE VOL BLOCK
PUSHJ P,L%DENT ;AND DELETE IT
$RETT ;RETURN
>;END TOPS10
SUBTTL D$SMDA - Set tape drive un/available/ initialize
;CALL: M/ The message Address
;
;RET: True Always
TOPS10<
D$SMDA: $SAVE <P1,P2> ;SAVE SOME SPACE
MOVX S1,.TAPDV ;CODE TO FIND A TAPE DEVICE BLOCK
PUSHJ P,A$FNDB## ;FIND THAT IN THE MESSAGE
JUMPF E$IMO## ;CAN'T THAT'S AN ERROR
MOVE P2,S1 ;SAVE ADDR OF ASCII DEVICE NAME
SETZM P1 ;ASSUME WE ARE 'SET AVAILABLE'
MOVX S1,.DVAVL ;CODE FOR SET AVAILABLE
PUSHJ P,A$FNDB## ;TRY TO FIND THAT ONE
JUMPT STAP.1 ;SET AVAILABLE.. GO DO IT
MOVEI P1,1 ;MAKE IT 'SET UNAVAILABLE'
MOVX S1,.DVUAV ;CODE FOR SET UNAVAILABLE
PUSHJ P,A$FNDB## ;TRY FOR THAT ONE
JUMPF STAP.3 ;NEITHER OF THOSE, PERHAPS INITIALIZE
;Here to set unavailable
MOVE S1,P2 ;GET BACK ADDR OF ASCII DEV NAME
PUSHJ P,FNDUCB ;FIND THE AVAILABLE UCB
JUMPF .RETF ;CAN'T... GO AWAY AND COMPLAIN
MOVE P2,S1 ;FOUND THE UCB.. SAVE IT
SKIPE S1,.UCBVS(P2) ;ANY OWNERS FOR THIS UNIT ???
$ERJMP MD$VAU,S1 ;YES,,CAN THE REQUEST
SKIPE S1,.UCBVL(P2) ;AIM AT THE VOLUME
PUSHJ P,VLBREAK ;DELINK THIS VOLUME
STAP.0: MOVEI S1,[ITEXT (<Drive is currently initializing>)]
LOAD S2,.UCBST(P2),UC.INI ;GET THE INIT BIT FOR THIS DRIVE
JUMPN S2,STAP.E ;IF INITIALIZING, CAN'T SET UNAVAILABLE
MOVE S1,.UCBNM(P2) ;GET THE UNIT NAME
PUSHJ P,I$MDAC## ;CLEAR DVCMDA MONITOR BIT
MOVX S2,UC.AVA+UC.AVR ;GET AVAILABLE+AVR BITS
ANDCAM S2,.UCBST(P2) ;CLEAR THEM
MOVEI S1,[ITEXT (< Unavailable for use >)]
PUSHJ P,STAP.E ;ACK THE OPR
MOVE S1,P2 ;GET THE UCB ADDRESS IN S1
PUSHJ P,D$DECA ;DECRIMENT THE 'A' MATRIX
PUSHJ P,DEADLK ;CHECK WITH DEADLOCK AVOIDANCE ROUTINE
JUMPT .RETT ;THAT WINS,,GOOD !!!
$WTO (<Warning: ^T/BELLS/System deadlock detected>,<Reason: Unit ^W/.UCBNM(P2)/ was set unavailable>,,<$WTFLG(WT.SJI)>)
$RETT ;RETURN
;Here to set available
STAP.1: MOVE S1,P2 ;GET BACK ADDR OF ASCII DEVICE NAME
PUSHJ P,LOCUCB ;FIND UCB, UNAVAILABLE OR NOT
JUMPF .RETF ;COULDN'T... MUST BE BAD DEVICE
MOVE P2,S1 ;FOUND IT.. SAVE ADDR OF UCB
LOAD S2,.UCBST(P2),UC.AVA ;GET THE AVAILABLE BIT
JUMPN S2,[MOVEI S1,[ITEXT (< Already available for use >)]
PJRST STAP.E ] ;ALREADY AVAILABLE,,TELL OPR AND RETURN
PUSHJ P,I$GATR## ;GET THE DEVICE ATTRIBUTES
LOAD S2,.UCBST(P2),UC.AVA ;GET THE AVAILABLE BIT
JUMPE S2,STAP.6 ;SET AVAILABLE LOST,,COMPLAIN AND QUIT
MOVEI S1,[ITEXT (< Available for use >)]
PUSHJ P,STAP.E ;TELL THE OPR
MOVE S1,.UCBNM(P2) ;GET THE UNIT NAME
PUSHJ P,SNDREC ;YES,,SEND A RECOGNIZE MSG TO PULSAR
MOVE S1,P2 ;GET THE UCB ADDRESS IN S1
PUSHJ P,D$INCA ;INCRIMENT THE 'A' MATRIX
$RETT ;RETURN
;Here to see if it is a SET TAP x INITIALIZE
STAP.3: MOVX S1,.DVINI ;GET BLOCK TYPE - INTIALIZE
PUSHJ P,A$FNDB## ;TRY FOR THAT BLOCK
JUMPF E$IMO## ;CAN'T, SO COMPLAIN
MOVE S1,P2 ;GET BACK ADRS OF DRIVE NAME
PUSHJ P,FNDUCB ;FIND THIS GUY'S DATA BASE
JUMPF .POPJ ;NOT THERE??!! OH WELL
MOVE P2,S1 ;SAVE ADRS OF UCB
MOVX S1,.SIABO ;GET BLOCK TYPE - /ABORT
PUSHJ P,A$FNDB## ;TRY FOR THAT BLOCK
JUMPT STAP.5 ;FOUND IT,,ABORT THE INITIALIZATION
MOVEI S1,[ITEXT (<Already initializing>)]
MOVE S2,.UCBST(P2) ;GET DRIVE STATUS
TXNE S2,UC.INI ;ALREADY BEEN HERE?
JRST STAP.E ;YES, TELL THE OPR THAT
MOVEI S1,[ITEXT (<Unavailable for initialization>)]
TXNN S2,UC.AVA ;IS DRIVE SET UNAVAILABLE?
JRST STAP.E ;TELL THE OPR THE BAD NEWS
MOVX S1,UC.VSW ;GET THE VOLUME SWITCH STATE BIT
TDNN S1,.UCBST(P2) ;IF SWITCHING REELS,,LETERRIP !!
SKIPN S1,.UCBVL(P2) ;GET ADRS OF LOADED VOL BLOCK
JRST STAP.4 ;NO VOL BLOCK, DO THE INITIALIZE
PUSHJ P,FNDOWN ;FIND THIS VOL'S OWNER
SKIPF ;SKIP IF UNOWNED
$ERJMP MD$VAU ;THERE IS ONE! CAN'T INIT THAT TAPE
MOVE S1,.UCBVL(P2) ;NO OWNER, AIM AT VOL BLOCK AGAIN
PUSHJ P,VLBREAK ;BREAK THIS VOL - UCB LINK
STAP.4: MOVX S1,UC.INI ;GET THE INITIALIZING BIT
IORM S1,.UCBST(P2) ;LITE SO OTHERS WILL SEE
PJRST I$FPLR## ;LET PULSAR DO THE WORK
;Here for /ABORT processing
STAP.5: MOVX S1,UC.INI ;GET THE INITIALIZATION BIT
ANDCAM S1,.UCBST(P2) ;CLEAR IT
PJRST I$FPLR## ;TELL PULSAR NOT TO CONTINUE
;Here for could not set available
STAP.6: MOVE S1,.UCBNM(P2) ;GET THE DEVICE NAME
PUSHJ P,I$GOWN## ;TRY TO FIND THE OWNER
MOVEI P1,(S1) ;SAVE THE NUMBER IF ANY
MOVEI S1,[ITEXT (<Could not set device available for use>)]
MOVEI S2,[ITEXT (<Device ^W/.UCBNM(P2)/ already owned by job ^D/P1/>)]
SKIPT ;IF OWNED,,GO FINISH UP
MOVEI S2,[ITEXT (<No such device or error determining owning job number>)]
$ACK (<^I/0(S1)/>,<^I/0(S2)/>,MDAOBJ,.MSCOD(M))
$RETT
STAP.E: $ACK (<^I/0(S1)/>,,MDAOBJ,.MSCOD(M))
$RETT ;RETURN
>;END TOPS10
SUBTTL D$VSR - VOLUME SWITCH REQUEST FROM PULSAR
;CALL: M/ The VSR Message Address
;
;RET: True Always
TOPS10<
D$VSR: PUSHJ P,.SAVE4 ;SAVE SOME AC'S FOR A MINUTE
MOVX S1,.RECDV ;GET THE DEVICE BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF MISC.3 ;NOT THERE,,PULSAR MESSAGE ERROR
MOVE S1,0(S1) ;GET THE SIXBIT DEVICE NAME
PUSHJ P,UCBFND ;FIND ITS UCB ENTRY
JUMPF .RETF ;NOT THERE,,JUST RETURN
MOVE P1,S1 ;SAVE THE UCB ADDRESS
SKIPN P2,.UCBVS(P1) ;GET THE OWNERS VSL ADDRESS
PJRST [MOVE S1,P1 ;NONE,,THATS WIERD !!!
MOVX S2,%VTMV ; GET 'TOO MANY VOLUMES' STATUS
PJRST VSREOV ] ; END EXIT THROUGH VSREOV
MOVE AP,.VSMDR(P2) ;GET THE OWNER MDR ADDRESS
MOVX S1,.RLVOL ;GET THE RELATIVE VOLUME BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN OUR MESSAGE
JUMPF MISC.3 ;NOT THERE,,ANOTHER PULSAR ERROR
MOVE S2,0(S1) ;GET THE BLOCK DATA IN S2
SETZM P4 ;DEFAULT TO READING THE VOLUME SET
TXNE S2,%VWRT ;IS HE WRITING THE VOLUME SET ???
SETOM P4 ;YES,,INDICATE WRITING VOLUME
LOAD S2,S2,RLV.CD ;GET THE OFFSET CODE FOR THE NEXT VOLUME
LOAD T1,.VSCVL(P2),VS.OFF ;GET THE OFFSET TO THE CURRENT VOLUME
CAXN S2,%RLNXT ;DO WE WANT THE NEXT VOLUME ???
ADDI T1,1 ;YES,,BUMP OFFSET BY 1
CAXN S2,%RLPRV ;DO WE WANT THE PREVIOUS VOLUME ???
SUBI T1,1 ;YES,,DECRIMENT OFFSET BY 1
CAXN S2,%RLFIR ;DO WE WANT THE FIRST VOLUME ???
SETZM T1 ;YES,,OFFSET IS 0
SKIPGE T1 ;OFFSET CAN'T BE NEGATIVE !!
$STOP (ONV,Offset of New Volume is Invalid) ;LEAVE THIS FOR A WHILE
;P4 = -1 Writing Volume Set.
;P4 = 0 Reading Volume Set.
;P4 = 1 Extending Volume Set.
LOAD S2,.VSCVL(P2),VS.CNT ;GET THE VOLUME COUNT IN S2
CAIG T1,-1(S2) ;NEW OFFSET MUST BE LESS OR EQUAL
JRST VSR.0 ;OK,,SKIP THIS
CAILE T1,^D60 ;MORE THEN 60 VOLUMES ???
PJRST [MOVE S1,P1 ;YES,,GET THE UCB ADDRESS IN S1
MOVX S2,%VTMV ;GET 'TOO MANY VOLUMES' STATUS
PJRST VSREOV ] ;END EXIT THROUGH VSREOV
MOVE S1,P1 ;GET THE UCB ADDRESS IN S1
MOVX S2,%VEOF ;GET 'END OF FILE' STATUS
JUMPE P4,VSREOV ;P4=0,,SEND EOV MSG TO PULSAR
MOVEI P4,1 ;SET FLAG INDICATING VOL SET EXTENSION
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
VSR.0: MOVE S1,P2 ;GET THE VSL ADDRESS
PUSHJ P,I$TDSM## ;PERFORM TAPE ACCOUNTING
MOVE S1,.UCBNM(P1) ;GET THE DEVICE NAME IN S1
PUSHJ P,REWIND ;REWIND THE LAST VOLUME
LOAD S1,.VSFLG(P2),VS.ABO ;GET ABORTED BY OPERATOR STATUS
JUMPN S1,VSR.1 ;IF ABORTED,,DON'T DEALLOCATE
;Deallocate the current volume Resource Number
PUSHJ P,D$CMTX ;LOCATE THIS GUYS 'C' MATRIX ENTRY
LOAD S1,.VSCVL(P2),VS.OFF ;GET THE OFFSET TO THE CURRENT VOLUME
ADDI S1,.VSVOL(P2) ;POINT TO ITS ADDRESS
MOVE S1,0(S1) ;GET THE CURRENT VOLUME ADDRESS
PUSHJ P,D$TVRS ;CONVERT TO A VOLUME RESOURCE NUMBER
MOVE S2,P2 ;GET THE VSL ADDRESS IN S2
PUSHJ P,SUBAMA ;REMOVE FROM THE 'A' MATRIX
PUSHJ P,SUBCMA ;REMOVE FROM THE 'C' MATRIX
MOVE S1,P2 ;GET THE VSL ADDRESS
PUSHJ P,CLROWN ;CLEAR OWNERSHIP FLAG
;Update the VSL status
VSR.1: MOVX S1,UC.VSW ;GET THE VOLUME SWITCH STATUS BITS
IORM S1,.UCBST(P1) ;LITE IT IN THE UCB
MOVX S1,VS.VSW ;GET THE VOLUME SWITCH STATUS BITS
IORM S1,.VSFLG(P2) ;LITE IT IN THE VSL
MOVX S1,VS.ABO ;GET ABORT FLAG
ANDCAM S1,.VSFLG(P2) ;CLEAR IT
MOVEM P1,.VSUCB(P2) ;LINK THIS UCB TO THIS VSL
STORE T1,.VSCVL(P2),VS.OFF ;SAVE THE OFFSET TO THE NEW VOLUME
JUMPG P4,VSR.2 ;IF EXTENDING VOLUME SET,,SKIP THIS
MOVE S1,P2 ;GET THE VSL ADDRESS
PUSHJ P,MNTVSR ;TRY TO MOUNT THE NEXT VOLUME
$RETT ;WIN OR LOSE, KEEP GOING
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here if we need the next volume in the volume set and there are no
;more volumes in the VSL. If reading the volume set, return EOV. If
;writing the volume set, generate a new VOL block for another volume
;and ask the OPR to mount another volume. Only add volumes up
;to a max of 60, after which send the EOV msg to PULSAR.
VSR.2: MOVE S1,VSLQUE ;GET THE VSL QUEUE ID
MOVE S2,P2 ;GET THE VSL ADDRESS IN S2
PUSHJ P,L%APOS ;POSITION TO THE VSL IN THE QUEUE
PUSHJ P,L%SIZE ;GET THIS VSL'S LENGTH (IN S2)
MOVE P4,S2 ;SAVE THE OLD VSL LENGTH
ADDI S2,1 ;ADD 1 FOR NEW VOL BLOCK
PUSHJ P,L%CENT ;CREATE A NEW VSL FOR THIS GUY
MOVE P3,S2 ;SAVE THE NEW VSL ADDRESS
HRL S2,P2 ;GET OLD VSL ADDR,,NEW VSL ADDR
ADDI P4,-1(P3) ;GET NEW VSL END -1
BLT S2,0(P4) ;COPY OLD VSL TO NEW VSL
MOVE S1,VSLQUE ;GET THE VSL QUEUE ID
MOVE S2,P2 ;GET THE OLD VSL ADDRESS
PUSHJ P,L%APOS ;POSITION TO THE OLD VSL
PUSHJ P,L%DENT ;AND DELETE IT !!!
MOVE AP,.VSMDR(P3) ;GET THE MDR ADDRESS
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT
MOVNS S1 ;NEGATE IT
MOVSS S1 ;MOVE RIGHT TO LEFT
HRRI S1,.MRVSL(AP) ;CREATE AOBJN FOR VSL LIST
VSR.2A: CAMN P2,0(S1) ;IS THIS THE VSL WE WANT ???
MOVEM P3,0(S1) ;YES,,CHANGE OLD VSL PTR TO NEW VSL
AOBJN S1,VSR.2A ;CHECK AGAIN
LOAD S1,.VSCVL(P3),VS.CNT ;GET THE VOL COUNT FOR THIS VSL
MOVNS S1 ;NEGATE IT
MOVSS S1 ;MOVE RIGHT TO LEFT
HRRI S1,.VSVOL(P3) ;CREATE AOBJN FOR VOL LIST
VSR.3: MOVE P4,0(S1) ;GET FIRST/NEXT VOL ADDRESS IN P4
LOAD S2,.VLOWN(P4),VL.CNT ;GET THE VSL COUNT FOR THIS VOLUME
MOVNS S2 ;NEGATE IT
MOVSS S2 ;MOVE RIGHT TO LEFT
HRRI S2,.VLVSL(P4) ;CREATE AOBJN FOR VSL LIST
VSR.4: CAIN P2,@0(S2) ;IS THIS VOL POINTING AT OLD VSL ???
JRST [HRRM P3,0(S2) ;YES,,POINT IT AT THE NEW VSL
JRST VSR.5 ] ;AND CONTINUE
AOBJN S2,VSR.4 ;CONTINUE THROUGH ALL VSL'S
VSR.5: AOBJN S1,VSR.3 ;CONTINUE THROUGH ALL VOL'S
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
MOVE S1,.VSUCB(P3) ;GET THE DEVICE THIS GUY OWNS
MOVEM P3,.UCBVS(S1) ;AND POINT IT AT THE OWNERS NEW VSL
MOVE S1,P3 ;GET OUR VSL ADDRESS
PUSHJ P,GENVOL ;CREATE A 'SCRATCH' VOL BLOCK
LOAD S1,.VSFLG(P3),VS.WLK ;GET THE WRITE LOCKED BIT
LOAD S2,.VSFLG(P3),VS.LBT ;GET THE LABEL TYPE
LOAD P1,.VSATR(P3),VS.TRK ;GET THE TRACK STATUS
LOAD P2,.VSATR(P3),VS.DEN ;GET THE REQUESTED DENSITY
$WTO (<Magtape mount request #^D/.VSRID(P3),VS.RID/>,<^I/DEMO/^M^JVolume-set-name: ^T/.VSVSN(P3)/^T/MTAHDR/Scratch ^T9/@WRTENA(S1)/^T9/@LABELS(S2)/^W6/TRK(P1)/^T/@DENSTY(P2)/^T/BELLS/>,,<$WTFLG(WT.SJI)>)
$RETT ;NOTIFY THE OPERATOR AND RETURN
>
SUBTTL D$DVS - DISMOUNT/DEALLOCATE VOLUME SET PROCESSOR
;CALL: M/ The message Address
;
;RET: True Always
TOPS10 <
D$DVS: SKIPN G$MDA## ;IS MDA SUPPORTED ???
JRST E$MDA## ;NO,,RETURN AN ERROR !!!
PUSHJ P,.SAVE3 ;SAVE P1 - P3
LOAD S1,G$PRVS##,MD.PJB ;GET THE SENDERS JOB NUMBER
PUSHJ P,FNDMDR ;FIND HIS MDR
JUMPF E$SDY## ;NOT THERE,,THATS AN ERROR
MOVE S1,G$SND## ;GET THIS USERS PID
MOVEM S1,.MRPID(AP) ;SAVE IT FOR THE ACK
MOVE S1,.MSCOD(M) ;GET THE SENDERS ACK CODE
MOVEM S1,.MRACK(AP) ;SAVE IT
SETZM S1 ;NO GENERAL ACK
STORE S1,.MRFLG(AP),MR.ACK ;SO CLEAR ACK FLAG BIT
LOAD S1,.OFLAG(M),MM.WAT ;GET 'WAITING' FLAG BIT
STORE S1,.MRFLG(AP),MR.WAT ;SET/CLEAR IT
LOAD S1,.OFLAG(M),MM.NOT ;GET 'NOTIFY' FLAG BIT
STORE S1,.MRFLG(AP),MR.NOT ;SET/CLEAR IT
LOAD P3,.OFLAG(M),MM.DLC ;SET DISMOUNT(0)/DEALLOCATE(1)
SETZM STRVOL ;CLEAR VSL PROCESSED FLAG
SETZM G$MSG ;CLEAR THE MDA BUFFER
MOVX S1,.RECDV ;GET THE DEVICE NAME BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPT DVS.3 ;FOUND IT,,GO PROCESS IT
MOVX S1,.RCTVS ;GET THE VOLUME SET NAME BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF E$IFD## ;NOT THERE,,THATS AN ERROR
DVS.1: MOVE P2,S1 ;SAVE THE VOLUME SET NAME ADDRESS
;Here if he passed a Volume Set Name
DVS.2: PUSHJ P,FNDLNM ;LOOK FOR A VSL WITH THAT LOGICAL NAME
JUMPT DVS.5 ;FOUND IT,,GO PROCESS THE VSL
MOVE S1,P2 ;NOT FOUND,,POINT TO ASCIZ VOL SET NAME
PUSHJ P,FNDVSN ;LOOK FOR THE VSL WITH THIS NAME
JUMPT DVS.5 ;FOUND IT,,GO PROCESS THIS VSL
JRST E$IVN## ;RETURN INVALID VOL SET NAME SPECIFIED
;Here if he passed a device name
DVS.3: MOVE P2,0(S1) ;SAVE THE DEVICE NAME
MOVE S1,P2 ;GET THE SIXBIT DEVICE NAME IN S1
PUSHJ P,UCBFND ;GET THE UCB FOR THIS DEVICE
JUMPF DVS.4 ;NOT THERE,,TRY VOL SET/LOGICAL NAME
MOVE P1,S1 ;SAVE THE UCB ADDRESS
SKIPE S1,.UCBVS(P1) ;CHECK AND LOAD THE OWNING VSL ADDRESS
CAME AP,.VSMDR(S1) ;DOES HE OWN THE DEVICE ???
JRST E$SDY## ;SPECIFIED DEVICE IS NOT HIS !!!
PJRST DVS.5 ;HE OWNS THE DEVICE,,PROCESS THE VSL
;CONTINUED ON THE NEXT PAGE
DVS.4: $TEXT (<-1,,TMPVSL>,<^W/P2/^0>) ;NO,,GEN ASCIZ VOL SET NAME
MOVEI S1,TMPVSL ;POINT TO THE VOL SET NAME
JRST DVS.1 ;AND TRY TO FIND A VOL SET BY THAT NAME
;Here to process the VSL whose address is in S1.
DVS.5: MOVE P1,S1 ;SAVE THE VSL ADDRESS
SETZM G$ACK## ;DO NOT ACK TWICE !!!
SKIPN S1,.VSUCB(P1) ;CHECK AND LOAD THE UNIT ADDRESS
JRST DVS.6 ;NOT THERE,,CONTINUE ON
LOAD S2,.UCBST(S1),UC.DVT ;GET THE DEVICE TYPE
CAXE S2,%DISK ;IS IT A STRUCTURE ???
JRST DVS.7 ;NO,,THATS AN ERROR
MOVE S1,P1 ;GET THE VSL ADDRESS
MOVX S2,VS.ARD ;GET THE ALWAYS RECOMPUTE BIT
ANDCAM S2,.VSFLG(S1) ;CLEAR IT
MOVE S2,.VSVOL(S1) ;GET THE VOLUME BLOCK ADDRESS
PUSHJ P,DSLMSG ;GEN 'DELETE FROM SEARCH LIST' & SEND IT
SKIPE P3 ;IS THIS A DEALLOCATE ???
ZERO .VSFLG(P1),VS.UAL ;YES,,ZAP THE USER ALLOCATE FLAG
LOAD S1,.OFLAG(M),MM.REM ;GET REMOVE STR FLAG BIT
STORE S1,.VSFLG(P1),VS.REM ;SET/CLEAR IT
$RETT ;WAIT FOR PULSAR ACK !!!
DVS.6: JUMPE P3,DVS.6A ;IF DISMOUNT,,THATS AN ERROR
$TEXT (<-1,,G$MSG>,<Volume set ^T/.VSVSN(P1)/ has been Deallocated^M^J^0>)
PUSHJ P,USRNOT ;ACK THE USER
MOVE S1,P1 ;GET THE VSL ADDRESS
LOAD S2,.OFLAG(M),MM.REM ;GET /REMOVE STR FLAG BIT
SKIPE S2 ;DID USER SPECIFY /REMOVE ???
PUSHJ P,TELREM ;YES,,TELL THE OPERATOR
LOAD S1,.VSFLG(P1),VS.ALC ;WERE WE JUST ALLOCATED ???
SKIPN S1 ;YES,,DON'T BOTHER THE OPERATOR
$WTO (<Mount Request #^D/.VSRID(P1),VS.RID/ cancelled by user>,< ^I/DEMO/^M^J Volume-set-name: ^T/.VSVSN(P1)/>,,<$WTFLG(WT.SJI)>)
MOVE S1,P1 ;GET THE VSL ADDRESS
PUSHJ P,DELVSL ;DEALLOCATE/DELETE THIS VOLUME SET
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT
JUMPE S1,DELMDR ;NO MORE,,DELETE THE MDR AND RETURN
$RETT ;ELSE RETURN
DVS.6A: $TEXT (<-1,,G$MSG>,<Volume set ^T/.VSVSN(P1)/ is not Mounted^M^J^0>)
SETOM ERRACK ;INDICATE THIS IS AN ERROR
PUSHJ P,USRNOT ;TELL THE USER
$RETT ;AND RETURN
DVS.7: MOVEI S2,[ASCIZ/Dismount/] ;DEFAULT TO A DISMOUNT
SKIPE P3 ;UNLESS IT IS DEALLOCATE
MOVEI S2,[ASCIZ/Deallocate/] ; THEN MAKE IT DEALLOCATE
$TEXT (<-1,,G$MSG>,<Can't ^T/0(S2)/ volume set ^T/.VSVSN(P1)/^M^J Unit ^W/.UCBNM(S1)/ must be deassigned^M^J^0>)
SETOM ERRACK ;THIS IS AN ERROR
PUSHJ P,USRNOT ;TELL THE USER
$RETT ;AND RETURN
>
SUBTTL D$RCATALOG - RESPONSE TO CATALOG INFO REQUEST MSG PROCESSOR
;CALL: M/ The Catalog Response Message Address
;
;RET: True Always
TOPS10<
D$RCAT: PUSHJ P,.SAVE4 ;SAVE P1 - P4
MOVX S1,.RCTVS ;GET THE VOLUME SET NAME BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF MISC.3 ;NOT THERE,,THATS AN ERROR
HRROI S1,0(S1) ;POINT TO THE ASCIZ VOL SET NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
MOVEM S2,MDAOBJ+OBJ.UN ;SAVE IT IN THE OBJECT BLOCK
SETZM P4 ;NOT A USER REQUEST...
MOVX S1,.CVSFS ;GET THE VOL SET STR DESCRIPTION BLK
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF MISC.3 ;NOT THERE,,THATS AN ERROR
MOVE P2,S1 ;SAVE THE DESCRIPTION BLK ADDR IN P2
SKIPN S1,.MSCOD(M) ;GET THE ACK CODE (MDR ID)
JRST MISC.3 ;NONE THERE,,THATS AN ERROR
CAMN S1,[-1] ;IS IT -1 ???
JRST RCAT.0 ;YES,,NOT A USER REQUEST
PUSHJ P,FNDVSL ;FIND THE VSL FOR THIS USER
JUMPF RCAT.0 ;NOT THERE,,SKIP THIS
MOVE P4,S1 ;SAVE THE VSL ADDRESS
RCAT.0: SETZM CATOLD ;CLEAR OLD CATALOG ENTRY ADDRESS
MOVE S1,MDAOBJ+OBJ.UN ;GET BACK THE VOLUME SET NAME
PUSHJ P,D$FCAT ;TRY TO FIND THE VOL SET IN THE CATALOG
SKIPF ;FOUND IT?
MOVEM S1,CATOLD ;YES - REMEMBER THE ADDRESS
;Here to create an entry in the Vol Set Catalog
MOVE S1,CATQUE ;GET THE CATALOG QUEUE ID
PUSHJ P,L%LAST ;POSITION TO LAST ENTRY
MOVE S1,CATQUE ;GET THE CATALOG QUEUE ID
LOAD S2,.CVSNV(P2),CVS.NV ;GET THE # OF VOLUMES IN THE VOLUME SET
IMULI S2,CATBLN ;ADD LENGTH OF EACH ENTRY
ADDI S2,CATLEN ;ADD THE HEADER LENGTH
PUSHJ P,L%CENT ;CREATE AN ENTRY
MOVEM S2,CATNEW ;REMEMBER IT FOR LATER
MOVE S1,MDAOBJ+OBJ.UN ;GET BACK THE VOLUME SET NAME
MOVEM S1,.CTVSN(S2) ;SAVE IT
MOVE S1,.CVSOW(P2) ;GET THE OWNER ID FROM THE CATALOG
MOVEM S1,.CTOID(S2) ;SAVE IT
MOVE S1,.CVSON+0(P2) ;GET THE OWNER NAME (WORD 1)
MOVEM S1,.CTNAM+0(S2) ;SAVE IT
MOVE S1,.CVSON+1(P2) ;GET THE OWNER NAME (WORD 2)
MOVEM S1,.CTNAM+1(S2) ;SAVE IT
MOVEI P1,.CTVOL(S2) ;POINT TO THE CAT ENTRY BLOCKS
MOVEI P3,.CVSLN(P2) ;POINT TO THE FIRST VOLUME BLOCK
LOAD P2,.CVSNV(P2),CVS.NV ;GET THE VOLUME COUNT
MOVEM P2,.CTCNT(S2) ;SAVE IT
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
RCAT.1: LOAD S1,ARG.HD(P3),AR.TYP ;GET THE BLOCK TYPE
CAXE S1,.CVLPR ;MUST BE THE CORRECT TYPE
JRST RCAT.4 ;NO,,THATS AN ERROR
MOVE S1,ARG.DA+.CVLID(P3) ;GET THE VOLUME ID
MOVEM S1,.CTVID(P1) ;SAVE IT
SETZM S1 ;ZERO S1
LOAD S2,ARG.DA+.CVLST(P3),CVL.KT ;GET THE KONTROLLER TYPE
STORE S2,S1,UC.KTP ;SAVE IT
LOAD S2,ARG.DA+.CVLST(P3),CVL.UT ;GET THE UNIT TYPE
STORE S2,S1,UC.UTP ;SAVE IT
PUSHJ P,DSKRSN ;GET ITS RESOURCE NUMBER
JUMPF RCAT.4 ;NO GOOD,,THATS AN ERROR
MOVEM S1,.CTRSN(P1) ;SAVE IT
ADDI P1,CATBLN ;POINT TO THE NEXT BLOCK
MOVEI P3,ARG.DA+.CVLLN(P3) ;HERE ALSO
SOJG P2,RCAT.1 ;CONTINUE FOR ALL VOLUMES
RCAT.2: SKIPN S1,CATOLD ;HAVE AN OLD ENTRY?
JRST RCAT.3 ;NO
MOVE S2,CATNEW ;GET NEW ENTRY ADDRESS
MOVEI P3,.CTCAT ;SET THE BUILD CODE TO SAY
MOVEM P3,.CTBLD(S2) ; THIS ENTRY CAME FROM STRLST
PUSHJ P,D$CCAT ;COMPARE THE TWO
MOVE P1,S1 ;GET THE ENTRY ADDRESS TO USE
MOVE S2,S1 ;...
MOVE S1,CATQUE ;GET QUEUE HEADER
PUSHJ P,L%APOS ;POSITION THERE
RCAT.3: JUMPE P4,.RETT ;RETURN IF AN INTERNAL REQUEST
MOVE S1,P4 ;GET THE VSL ADDRESS
PUSHJ P,D$ALOC ;TRY TO COMPLETE ALLOCATION
JUMPF [JUMPL S1,.RETT ;ALLOCATION POSTPONED,,JUST RETURN
MOVE S1,P4 ;NO GOOD,,GET THE VSL ADDRESS BACK
PJRST DELETE ] ; AND DELETE THE VOL SETS JUST ADDED
LOAD S2,.MRJOB(AP),MD.PJB ;GET THE PROCESS JOB NUMBER
MOVE S1,P4 ;GET THE VSL ADDRESS BACK
TXNE S2,BA%JOB ;IS THIS A PSEUDO PROCESS ??
MOVE S1,.MRVSL(AP) ;YES,,MOUNT TO THE FIRST VSL
PUSHJ P,MNTVSL ;TRY TO MOUNT THE USERS REQUEST
$RETT ;RETURN IN ANY CASE
RCAT.4: MOVE S1,CATQUE ;GET THE QUEUE ID
PUSHJ P,L%DENT ;DELETE THE CURRENT ENTRY
JUMPE P4,.RETT ;AN INTERNAL REQUEST,,RETURN
$TEXT (<-1,,G$MSG>,<Can't mount volume set ^T/.VSVSN(P4)/ - No drives available^M^J^0>)
SETOM ERRACK ;INDICATE AN ERROR ACK
PUSHJ P,USRNOT ;TELL THE USER
MOVE S1,P4 ;GET THE VSL ADDRESS
PUSHJ P,REMOVE ;DELETE THIS VSL AND RETRY THE MOUNT
$RETT ;RETURN
>
SUBTTL D$GENC - ROUTINE TO GENERATE CATALOG ENTRIES FROM THE UCB'S
;CALL: S1/ The Primary Vol Block Address
;
;RET: True Always
TOPS10< INTERN D$GENC ;MAKE IT GLOBAL
D$GENC: PUSHJ P,.SAVE1 ;SAVE P1
MOVE P1,S1 ;COPY VOLUME BLOCK ADDRESS
MOVE S1,.VLNAM(P1) ;GET THE STR NAME
PUSHJ P,D$FCAT ;LOOK FOR IT IN THE CATALOG
SKIPT ;FOUND IT?
SETZ S1, ;NO
MOVEM S1,CATOLD ;REMEMBER IT FOR LATER
MOVE S1,CATQUE ;GET THE CATALOG QUEUE ID
PUSHJ P,L%LAST ;POSITION TO THE END OF THE Q
MOVE S1,P1 ;GET THE VOL BLK ADDRESS BACK
SETZM S2 ;ZERO THE VOLUME COUNTER
LOAD S1,.VLPTR(S1),VL.NXT ;GET THE NEXT VOL BLK ADDRESS
AOS S2 ;BUMP THE VOLUME COUNT
JUMPN S1,.-2 ;CONTINUE FOR ALL VOLUMES
PUSH P,S2 ;SAVE THE VOLUME COUNT
IMULI S2,CATBLN ;CALC NUMBER OF WORDS TO GET
ADDI S2,CATLEN ;INCLUDE THE CATALOG HEADER
MOVE S1,CATQUE ;GET THE CATALOG QUEUE ID BACK
PUSHJ P,L%CENT ;CREATE A NEW CATALOG ENTRY
JUMPF GENC.2 ;FAILD FOR SOME REASON
MOVEM S2,CATNEW ;SAVE NEW ADDRESS FOR LATER
MOVE S1,.VLNAM(P1) ;GET THE STR NAME BACK
MOVEM S1,.CTVSN(S2) ;SET IT
MOVE S1,.VLOID(P1) ;GET THE OWNER PPN
MOVEM S1,.CTOID(S2) ;SAVE IT
MOVEI S1,.CTQSR ;SET THE BUILD CODE TO SAY
MOVEM S1,.CTBLD(S2) ; THIS ENTRY WAS CREATED BY QUASAR
POP P,.CTCNT(S2) ;INSERT VOLUME COUNT
MOVEI S2,.CTVOL(S2) ;POINT TO VOLUME BLOCKS
GENC.1: MOVE S1,.VLVID(P1) ;GET THE VOLID
MOVEM S1,.CTVID(S2) ;SET IT
MOVE S1,.VLUCB(P1) ;GET THE UNIT THIS VOLUME IS ON
LOAD S1,.UCBST(S1),UC.RSN ;GET THE UNIT RESOURCE NUMBER
MOVEM S1,.CTRSN(S2) ;SET IT
ADDI S2,CATBLN ;POINT TO THE NEXT VOLID BLOCK
LOAD P1,.VLPTR(P1),VL.NXT ;GET THE NEXT VOL BLK ADDRESS
JUMPN P1,GENC.1 ;CONTINUE IF THERE IS ONE
SKIPN S1,CATOLD ;WAS THERE AN OLD ENTRY?
$RETT ;NO
MOVE S2,CATNEW ;GET THE NEW ENTRY
PUSHJ P,D$CCAT ;COMPARE THE TWO
POPJ P, ;RETURN TRUE OR FALSE
GENC.2: $WTO (<Cannot cache STRLST.SYS entry for ^W/.VLNAM(P1)/>,,,<$WTFLG(WT.SJI)>)
$RETF ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL D$ACK - ROUTINE TO PROCESS MDA ACK MESSAGES
;CALL: M/ The ACK Message Address
;
;RET: True Always
TOPS10 <
D$ACK: MOVX S1,.RCTVS ;GET VOL SET NAME BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN OUR MESSAGE
JUMPF MISC.3 ;NOT THERE,,THATS AN ERROR
HRROI S1,0(S1) ;GET POINTER TO ASCIZ VOL SET NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
MOVE S1,S2 ;GET STRUCTURE NAME IN S1
PUSHJ P,FNDISK ;FIND ITS VOL BLOCK ADDRESS
JUMPF .RETT ;NOT THERE,,RETURN
LOAD S2,.MSFLG(M),AK.TYP ;GET THE ACK TYPE
CAILE S2,ACKLEN ;VALIDATE IT
SETZM S2 ;NO GOOD,,ZERO IT
PJRST @ACKDSP(S2) ;DISPATCH OFF TO PROCESS THE ACK
ACKDSP: EXP MISC.3 ;ACK TYPE 0 IS INVALID
EXP MNTACK ;ACK TYPE 1 IS MOUNT ACK
EXP DSMACK ;ACK TYPE 2 IS DISMOUNT ACK
EXP CATACK ;ACK TYPE 3 IS CATALOG ACK (ERROR ONLY)
EXP ASLACK ;ACK TYPE 4 IS ADD STR TO SRCH LIST ACK
EXP RMSACK ;ACK TYPE 5 REMOVE STR FROM SRCH LIST
EXP MNTOPC ;ACK TYPE 6 IS MOUNT ACK (OWNER PPN CL)
ACKLEN==.-ACKDSP ;DISPATCH TABLE LENGTH
>
SUBTTL Structure mount ACK processing
; Here on ACK types %MOUNT and %MNTOPC
; Call: MOVE S1, primary VOL block address
; PUSHJ P,MNTACK for normal structure mount ACKs
; PUSHJ P,MNTOPC when owner PPN is cleared
;
; TRUE return: always
;
TOPS10 <
MNTACK: TDZA S2,S2 ;INDICATE NORMAL MOUNT ACK
MNTOPC: MOVEI S2,1 ;INDICATE OWNER PPN CLEARED
PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
MOVE P1,S1 ;SAVE THE VOL BLOCK ADDRESS
LOAD S1,.MSFLG(M),AK.NAK ;IS THIS A NAK ???
JUMPN S1,MNTA.4 ;YES,,OH WELL !!!
$COUNT (STRM) ;count # of successful str mounts
MOVX S1,%STAMN ;GET STRUCTURE MOUNTED BIT
STORE S1,.VLFLG(P1),VL.STA ;SAVE IT AS NEW STRUCTURE STATUS
MOVE S1,G$NOW## ;GET THE CURRENT TIME
MOVEM S1,.VLMTM(P1) ;SAVE THE MOUNTED TIME
JUMPE S2,MNTA.3 ;SKIP LOOP IF NORMAL MOUNT ACK
SKIPA S1,P1 ;GET PRIMARY VOL BLOCK ADDRESS
MNTA.1: LOAD S1,.VLPTR(S1),VL.NXT ;GET THE NEXT VOL BLK ADDRESS
JUMPE S1,MNTA.2 ;DONE ALL VOL BLOCKS?
SETZM .VLOID(S1) ;CLEAR OWNER PPN
JRST MNTA.1 ;LOOP FOR ALL VOL BLOCKS
MNTA.2: MOVE S1,.VLNAM(P1) ;GET STR NAME
PUSHJ P,D$FCAT ;GET CATALOG ENTRY
SKIPF ;WE BLEW IT SOMEWHERE - AVOID A MESS
SETZM .CTOID(S1) ;CLEAR THE OWNER PPN IN THE CATALOG
MNTA.3: MOVEI S1,[ASCIZ ||] ;ASSUME NOT WRITE-LOCKED
MOVX S2,.MTWLK ;GET A BIT TO TEST
TDNE S2,.OFLAG(M) ;WRITE-LOCKED FOR ALL USERS?
MOVEI S1,[ASCIZ |Structure is software write-locked for all users|]
$WTO (<Structure ^W/.VLNAM(P1)/ mounted>,<^T/(S1)/>,,<$WTFLG(WT.SJI)>)
DOSCHD ;FORCE A SCHEDULING PASS
MOVE S1,P1 ;GET THE VOL BLK ADDR IN S1
PUSHJ P,I$STRM## ;PERFORM STRUCTURE ACCOUNTING
MOVE S1,.VLUCB(P1) ;GET THE UCB ADDRESS
PUSHJ P,MATUNI ;TRY TO ASSIGN THE DEVICE
$RETT ;RETURN
MNTA.4: $WTO (<Can't mount structure ^W/.VLNAM(P1)/>,,,<$WTFLG(WT.SJI)>)
MOVE S1,.VLSTR(P1) ;GET THE REAL STRUCTURE NAME
MOVEM S1,.VLNAM(P1) ;AND SAVE IT
MNTA.5: LOAD S1,.VLPTR(P1),VL.NXT ;GET THE NEXT VOL ADDRESS
SETZM .VLPTR(P1) ;CLEAR THE OLD POINTERS
MOVE P1,S1 ;GET THE NEXT VOL ADDRESS IN P1
JUMPN P1,MNTA.5 ;ANOTHER,,RESET IT ALSO
$RETT ;DONE,,RETURN
>
SUBTTL D$RMS - Routine to process the structure removed message
;CALL: M/ The Message address
;
;RET: Through DSMACK (as if from PULSAR)
TOPS10<
D$RMS:: MOVE S1,1(M) ;GET THE STRUCTURE NAME
PUSHJ P,FNDISK ;FIND ITS VOL BLOCK ADDRESS
JUMPF .RETT ;NOT THERE,,RETURN
MOVX S2,VL.REM ;GET THE /REMOVE FLAG BIT
ANDCAM S2,.VLFLG(S1) ;AND CLEAR IT
SETZM .MSFLG(M) ;CLEAR THE FLAG BITS (JUST IN CASE)
PJRST DSMACK ;REALLY CLEAN THINGS UP AND RETURN
>
SUBTTL DSMACK - ROUTINE TO PROCESS DISMOUNT ACKS FROM TAPE LABELER
;CALL: S1/ The VOL Address of the Primary VOL Block
;
;RET: True Always
TOPS10 <
DSMACK: PUSHJ P,.SAVE4 ;SAVE P1 - P4 FOR A MINUTE
MOVE P1,S1 ;SAVE THE VOL BLOCK ADDRESS
LOAD TF,.MSFLG(M),AK.NAK ;IS THIS A NAK ???
JUMPN TF,DSMA.4 ;YES,,OH WELL !!!!
PUSHJ P,DSMOPR ;TELL OPR ITS GONE
MOVE S1,P1 ;GET THE VOL BLK ADDR IN S1
PUSHJ P,I$STRD## ;PERFORM STRUCTURE ACCOUNTING
;Here to clear mounted bits for the structure since its now offline
MOVX S1,%STAWT ;GET 'WAITING' VOLUME STATUS
STORE S1,.VLFLG(P1),VL.STA ;SET IT
LOAD P2,.VLOWN(P1),VL.CNT ;GET THE REQUEST COUNT
JUMPE P2,DSMA.1 ;NO REQUESTORS,,SKIP THIS
$TEXT (<-1,,G$MSG>,<[Structure ^W/.VLNAM(P1)/ dismounted]^0>)
PUSH P,[-1] ;INDICATE END OF VSL QUEUE
MOVNS P2 ;NEGATE THE COUNT
MOVSS P2 ;MOVE RIGHT TO LEFT
HRRI P2,.VLVSL(P1) ;CREATE AOBJN AC TO VSL ADR LIST
PUSH P,0(P2) ;QUEUE UP A VSL ADDRESS
AOBJN P2,.-1 ;CONTINUE FOR ALL REQUESTORS
;Here to update the poor users status since the structure is now gone
DSMA.0: POP P,P3 ;PICK OFF A VSL ADDRESS
CAMN P3,[-1] ;IS THIS THE LAST ???
JRST DSMA.1 ;YES,,CONTINUE ON
TXNN P3,VL.ASN+VL.ASK ;DOES HE HAVE IT MOUNTED ?
JRST DSMA.0 ;NO,,TRY NEXT
LOAD AP,.VSMDR(P3) ;SET UP POINTER TO MDR
PUSHJ P,USRNOT ;TELL THE USER IT'S GONE
LOAD P4,.MRCNT(AP),MR.CNT ;SAVE THE CURRENT REQUEST COUNT
MOVE S1,.VSFLG(P3) ;DID USER ALLOCATE THIS STR OR IS VSL
TXNN S1,VS.UAL!VS.CTL ; PART OF PSEUDO PROCESS ALLOCATION?
JRST DSMA.Z ;NO TO EITHER - RETURN RESOURCES
TXO S1,VS.UAL ;INSURE ALLOC BIT ON INCASE CTL ONLY
TXZ S1,VS.NMT ;CLEAR MOUNTED FOR PSEUDO PROCESS
MOVEM S1,.VSFLG(P3) ;UPDATE FLAG WORD
PUSHJ P,DSMALC ;RETURN ALLOCATED RESOURCES
MOVE S1,P3 ;GET VSL ADDRESS
PUSHJ P,MNTVSL ;TRY TO RE-MOUNT IT
JRST DSMA.0 ;ON TO THE NEXT VSL
DSMA.Z: PUSHJ P,DSMALC ;RETURN ALLOCATED RESOURCES
JRST DSMA.0 ;GET THEM ALL
MOVE S1,P3 ;GET THE VSL ADDRESS IN S1
PUSHJ P,ALCVSL ;RETURN THE USERS RESOURCES
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE USERS NEW REQUEST COUNT
CAMN S1,P4 ;WAS THE VSL DELETED ???
ZERO .VSFLG(P3),VS.ALC ;NO,,REMOUNT IT !!!
SKIPN S1 ;STILL SOME REQUESTS LEFT,,SKIP
PUSHJ P,DELMDR ;ELSE DELETE THE MDR
JRST DSMA.0 ;GET THEM ALL !!!
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here to unload the volumes if /REMOVE was specified
DSMA.1: PUSH P,P1 ;SAVE THE VOL BLK ADDRESS FOR A SECOND
LOAD P2,.VLFLG(P1),VL.REM ;SAVE THE 'REMOVE' STRUCTURE STATUS
DSMA.2: SKIPN S1,.VLUCB(P1) ;GET THE UCB ADDRESS IN S1
$STOP (IVU,Invalid VOL/UCB Forward/Backchain Pointers)
SETZM .VLUCB(P1) ;ZAP VOL LINK TO UCB
SETZM .UCBVL(S1) ;ZAP UCB LINK TO VOL
MOVE S1,.UCBNM(S1) ;GET THE UNIT NAME
SKIPE P2 ;IF 'REMOVING THE STRUCTURE',,THEN
PUSHJ P,UNLOAD ; UNLOAD THE DEVICE
LOAD P1,.VLPTR(P1),VL.NXT ;GET THE NEXT VOLUME IN THE STRUCTURE
JUMPN P1,DSMA.2 ;IF ANOTHER VOLUME,,GO PROCESS IT
;Here to clear all LOCK status and events
DSMA.3: MOVE S1,0(P) ;GET THE VOL BLK ADRS BACK
MOVE S1,.VLNAM(S1) ;AND GET THE STR NAME
PUSHJ P,DMSLOK ;CLEAR ANY PENDING LOCKS, UNLOCKS
MOVE S1,0(P) ;GET THE VOL BLK ADRS BACK
MOVE S1,.VLNAM(S1) ;AND GET THE STR NAME
PUSHJ P,CLRELN ;CLEAR ANY LOCK NOTIFICATION, TOO
POP P,P1 ;RESTORE THE VOL BLK ADDRESS
ZERO .VLFLG(P1),VL.REM ;CLEAR THE REMOVE BIT
MOVX S1,%UNLCK ;GET NORMAL UNLOCKED STATUS
STORE S1,.VLFLG(P1),VL.LCK ;SET NEW STATUS FOR NEXT MOUNT
;Here to update the 'A' matrix if a permanent structure
MOVE S1,.VLNAM(P1) ;GET THE STRUCTURE NAME
PUSHJ P,D$SRSN ;GET THE STRUCTURE RESOURCE NUMBER
IMULI S1,AMALEN ;GET 'A' MATRIX OFFSET
ADD S1,AMATRX ;GET THE ENTRY ADDRESS
LOAD S2,.AMNAM(S1),AM.PRR ;GET THE PERMANENT RESOURCE BIT
JUMPE S2,DSMA.X ;NOT PERMANENT,,SKIP THIS
MOVX S2,AM.PRR ;GET THE PERMANENT STRUCTURE BIT
ANDCAM S2,.AMNAM(S1) ;CLEAR IT FOR THIS STRUCTURE
MOVE S1,.VLNAM(P1) ;GET THE STRUCTURE NAME
PUSHJ P,D$FCAT ;GET THE CATALOG ENTRY
SKIPT ;IT MUST BE THERE !!!
PUSHJ P,S..SCE ;NO,,THATS AN ERROR
MOVEI S2,.CTVOL(S1) ;POINT THE THE CAT VOL LIST
MOVE S1,.CTCNT(S1) ;GET THE VOL COUNT
DSMA.A: MOVE T1,.CTRSN(S2) ;GET THE VOL RESOURCE NUMBER
IMULI T1,AMALEN ;GET THE ENTRY OFFSET
ADD T1,AMATRX ;GET THE ENTRY ADDRESS
INCR .AMCNT(T1),AM.AVA ;INCRIMENT THE AVAILABLE COUNT BY 1
ADDI S2,2 ;POINT TO THE NEXT VOL BLK
SOJG S1,DSMA.A ;CONTINUE FOR ALL VOLUMES
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here when done to try to delete the VOL blocks
DSMA.X: MOVE S1,P1 ;GET PRIMARY VOL ADDRESS IN S1
PUSHJ P,DELVOL ;TRY TO DELETE THE VOL BLOCKS
$RETT ;RETURN
;Here if the structure could not be dismounted
DSMA.4: MOVX S1,%STAMN ;GET STRUCTURE MOUNTED BIT
STORE S1,.VLFLG(P1),VL.STA ;RESET STATUS TO 'MOUNTED'
$WTO (<Can't dismount structure ^W/.VLNAM(P1)/>,,,<$WTFLG(WT.SJI)>)
ZERO .VLFLG(P1),VL.REM ;CLEAR ANY REMOVE BITS
MOVE S1,.VLUCB(P1) ;GET THE UCB ADDRESS
PUSHJ P,MATUNI ;CHECK FOR ANY MOUNTS
$RETT ;RETURN
; Return the user's allocated resources
DSMALC: MOVE S1,P3 ;GET THE VSL ADDRESS IN S1
PUSHJ P,ALCVSL ;RETURN THE USERS RESOURCES
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE USERS NEW REQUEST COUNT
CAMN S1,P4 ;WAS THE VSL DELETED ???
ZERO .VSFLG(P3),VS.ALC ;NO,,REMOUNT IT !!!
SKIPN S1 ;STILL SOME REQUESTS LEFT,,SKIP
PUSHJ P,DELMDR ;ELSE DELETE THE MDR
POPJ P, ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL DSMOPR - Tell OPR about a structure just dismounted
;This routine informs the operator that a structure dismount
; is complete, and on which units
;Call -
; S1/ Addr of Primary VOL block (VOLs, UCBs still linked)
;Returns -
; True, after WTOing the OPR
TOPS10<
DSMOPR:
$SAVE <P1>
MOVE P1,S1 ;SAVE ADR OF PRIMARY VOL BLOCK
MOVE TF,[POINT 7,G$MSG] ;AIM AT THE BUFFER SPACE
MOVEM TF,MDBPTR ;SET THE POINTER
DSMO.1: SKIPN S2,.VLUCB(S1) ;GET ADRS OF THIS VOLUME'S UNIT BLK
PUSHJ P,S..IVU ;GONG, CAN'T GET HERE
$TEXT (MDADBP,<^W/.UCBNM(S2)/,^A>)
LOAD S1,.VLPTR(S1),VL.NXT ;GET POINTER TO NEXT VOL
JUMPN S1,DSMO.1 ;ANOTHER,,CONTINUE
DSMO.2: SETZ S1, ;MAKE A ZERO
DPB S1,MDBPTR ;AND TERMINATE THE TEXT
SKIPE .VLPTR(P1) ;WAS THERE MORE THAN ONE?
MOVE S1,[ASCII/s/] ;YES,,PLURALIZE IT..
$WTO (<Structure ^W/.VLNAM(P1)/ dismounted>,< From unit^T/S1/: ^T/G$MSG/>,,<$WTFLG(WT.SJI)>)
$RETT
>;END TOPS10
SUBTTL CATACK - ROUTINE TO PROCESS CATALOG ACKS FROM TAPE LABELER
;This routine is run when a volume set cannot be located in
; the volume set catalog
;
;CALL: S1/ The VOL Address of the Primary VOL Block
;
;RET: True Always
TOPS10 <
CATACK: PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
SKIPG S1,.MSCOD(M) ;GET THE ACK CODE
$RETT ;INTERNAL REQUEST,,RETURN NOW
PUSHJ P,FNDVSL ;FIND THE VSL
JUMPF .RETT ;NOT THERE,,JUST RETURN
MOVE P1,S1 ;SAVE THE VSL ADDRESS
MOVE AP,.VSMDR(P1) ;SETUP THE MDR ADDRESS
$TEXT (<-1,,G$MSG>,<Structure ^T/.VSVSN(P1)/ not in System Catalog^M^J^0>)
SETOM ERRACK ;THIS IS AN ERROR ACK
PUSHJ P,USRNOT ;ACK THE USER
MOVE S1,P1 ;GET THE VSL ADDRESS BACK
PUSHJ P,REMOVE ;GO AND DELETE THIS VSL & RETRY MOUNT
$RETT ;RETURN
>
SUBTTL ASLACK - ROUTINE TO PROCESS ACKS FOR ADDING STR TO A SEARCH LIST
;CALL: S1/ The VOL Address of the Primary VOL Block
;
;RET: True Always
TOPS10 <
ASLACK: PUSHJ P,.SAVE3 ;SAVE P1 & P2 FOR A MINUTE
MOVE P3,S1 ;SAVE THE VOL ADDRESS
MOVE S1,.MSCOD(M) ;GET THE ACK CODE (REQUEST ID)
PUSHJ P,FNDVSL ;FIND THE USER.
JUMPF .RETT ;NOT THERE,,OH WELL...
MOVE P1,S1 ;SAVE THE VSL ADDRESS
SETZM P2 ;NO ADDITIONAL TEXT YET
MOVX S1,.OMTXT ;GET SECONDARY TEXT BLOCK
PUSHJ P,A$FNDB## ;FIND IT
SKIPF ;SKIP IN NOT THERE
MOVE P2,S1 ;ELSE SAVE THE TEXT ADDRESS
JUMPE P2,ASLA.1 ;NO SECONDARY TEXT,,SKIP THIS
LOAD S1,-ARG.DA(P2),AR.LEN ;GET THE BLOCK LENGTH
PUSHJ P,M%GMEM ;GET SOME MEMORY
STORE S1,.VSTXT(P1),VS.LEN ;SAVE THE BLOCK LENGTH
STORE S2,.VSTXT(P1),VS.ADR ;SAVE THE BLOCK ADDRESS
ADD S1,S2 ;POINT TO THE END OF THE BLOCK
HRL S2,P2 ;GET SOURCE,,DESTINATION ADDRESS
BLT S2,-1(S1) ;COPY THE TEXT AND SAVE IT
ASLA.1: MOVX S1,AK.NAK ;GET A BIT
TDNE S1,.MSFLG(M) ;WAS IT A NAK?
JRST ASLA.2 ;YES
$COUNT (USTM) ;# of user structure mounts
MOVE S1,P1 ;GET VSL BLOCK ADDRESS
MOVE S2,P3 ;GET VOL BLOCK ADDRESS
PUSHJ P,AASCLR ;CLEAR VL.AAS
MOVE S1,P1 ;GET THE VSL ADDRESS
PUSHJ P,SETOWN ;SAY THIS GUY OWNS THE UNIT
MOVE S1,P1 ;GET THE VSL ADDRESS
PUSHJ P,I$SMNT## ;PERFORM STRUCTURE ACCOUNTING
MOVE S1,P1 ;GET THE VSL ADDRESS
PUSHJ P,ACKUSR ;TELL THE USER
$RETT ;AND RETURN
ASLA.2: SKIPN P2 ;ANY ADDITIONAL TEXT ???
MOVEI P2,[0] ;NO,,POINT TO A NULL BLOCK
$TEXT (<-1,,G$MSG>,<Can't mount structure ^T/.VSVSN(P1)/^M^J^T/0(P2)/^M^J^0>)
SETOM ERRACK ;INDICATE THIS IS AN ERROR ACK
PUSHJ P,USRNOT ;NOTIFY THE USER
MOVE S1,P1 ;GET THE VSL ADDRESS BACK
PUSHJ P,ALCVSL ;RETURN THIS VSL TO THE ALLOCATION POOL
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE USERS REQUEST COUNT
JUMPE S1,DELMDR ;NOTHING LEFT,,DELETE THE MDR
$RETT ;AND RETURN
>
SUBTTL RMSACK - ROUTINE TO PROCESS 'REMOVE STRUCTURE' ACKS
;CALL: S1/ The VOL Address of the Primary VOL Block
;
;RET: True Always
TOPS10<
RMSACK: PUSHJ P,.SAVE2 ;SAVE P1 AND P2 FOR A SECOND
MOVE P1,S1 ;SAVE THE VOL BLOCK ADDRESS
MOVE S1,.MSCOD(M) ;GET THE ACK CODE (REQUEST ID)
PUSHJ P,FNDVSL ;FIND THE VSL
JUMPF RMSA.1 ;NOT THERE,,GO CHECK OUT THE STR
PUSH P,S1 ;SAVE THE VSL ADDRESS FOR A SECOND
MOVX S1,.OMTXT ;GET THE REASON BLOCK
PUSHJ P,A$FNDB## ;FIND IT
SKIPT ;NOT THERE ???
MOVEI S1,[0] ;NOT THERE,,POINT TO NULL WORD
MOVE P2,S1 ;GET TEXT ADDRESS
LOAD TF,.MSFLG(M),AK.NAK ;IS THIS A NAK ???
JUMPN TF,RMSA.2 ;YES,,OH WELL !!!!
MOVE S1,(P) ;GET THE VSL ADDRESS BACK
$TEXT (<-1,,G$MSG>,<^T/(P2)/[Structure ^T/.VSVSN(S1)/ dismounted]^M^J^0>)
PUSHJ P,I$SDSM## ;PERFORM STRUCTURE ACCOUNTING
MOVE S1,.MRFLG(AP) ;GET WAIT/NOTIFY/ACK FLAGS ETC.
TXNE S1,MR.WAT ;WAITING?
TXO S1,MR.ACK ;THEN WE WANT TO ACK VIA IPCF
MOVEM S1,.MRFLG(AP) ;RESTORE FLAG WORD
MOVX S1,MR.DMO ;GET DISMOUNT BIT
IORM S1,.MRFLG(AP) ;LITE IT SO USRNOT DOES PRETTY THINGS
PUSHJ P,USRNOT ;NOTIFY THE USER
MOVE S1,0(P) ;GET THE VSL ADDRESS BACK
LOAD S2,.VSFLG(S1),VS.REM ;GET THE /REMOVE STR FLAG BIT
SKIPE S2 ;DID USER SPECIFY /REMOVE ???
PUSHJ P,TELREM ;YES,,TELL THE OPERATOR
POP P,S1 ;RESTORE THE VSL ADDRESS
PUSHJ P,ALCVSL ;DEALLOCATE IF WE CAN
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE VSL REQUEST COUNT
SKIPN S1 ;ANY MORE REQUESTS ???
PUSHJ P,DELMDR ;NO,,DELETE THIS MDR
RMSA.1: MOVE S1,P1 ;GET THE VOL BLOCK ADDR BACK
PUSHJ P,CHKSTR ;CHECK FOR STRUCTURE AVAILABILITY
$RETT ;THEN RETURN
RMSA.2: POP P,S1 ;RESTORE THE VSL ADDRESS
$TEXT (<-1,,G$MSG>,<Can't dismount structure ^T/.VSVSN(S1)/^M^J^T/(P2)/^0>)
SETOM ERRACK ;IS THIS AN ERROR
PUSHJ P,USRNOT ;SEND IT OFF TO THE USER
$RETT ;AND RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL D$ALIAS - ROUTINE TO MOUNT A STRUCTURE WITH AN ALIAS
;CALL: M/ The Mount Message Address (From ORION)
;
;RET: True Always
TOPS10<
D$ALIAS: PUSHJ P,.SAVE2 ;SAVE P1 & P2 FOR A SECOND
MOVX S1,.STRDV ;GET STRUCTURE NAME BLOCK TYPE
PUSHJ P,A$FNDB## ;LOCATE IT IN THE MESSAGE
JUMPF E$IMO## ;NOT THERE,,THATS AN ERROR
HRLI S1,(POINT 7,) ;MAKE A POINTER
$CALL S%SIXB ;CONVERT TO SIXBIT
MOVE P1,S2 ;GET THE STRUCTURE NAME
MOVEM P1,MDAOBJ+OBJ.UN ;SAVE IT IN THE OBJECT BLOCK
MOVE S1,VOLQUE ;GET THE VOLUME QUEUE ID
PUSHJ P,L%FIRST ;GET THE FIRST ENTRY
JRST ALIA.2 ;SKIP THE FIRST TIME THROUGH
ALIA.1: MOVE S1,VOLQUE ;GET THE VOLUME QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT ENTRY
ALIA.2: JUMPF ALIA.9 ;NO MORE,,THATS AN ERROR
SKIPE S1,.VLUCB(S2) ;VOLUME MUST BE MOUNTED !!!
CAME P1,.VLNAM(S2) ;AND STRUCTURE NAMES MUST MATCH !!!
JRST ALIA.1 ;NO,,TRY NEXT VOLUME
LOAD S1,.UCBST(S1),UC.DVT ;GET THE DEVICE TYPE
CAXE S1,%DISK ;IS IT A STRUCTURE ???
JRST ALIA.1 ;NO,,TRY NEXT VOLUME
LOAD S1,.VLFLG(S2),VL.STA ;GET THE VOLUME STATUS
CAXE S1,%STAWT ;IS IT WAITING ???
JRST ALIA.1 ;NO,,TRY NEXT VOLUME
;Here to process the primary vol block we found
MOVE P1,S2 ;SAVE THE PRIMARY VOL BLOCK ADDRESS
ALIA.3: SKIPN S1,.VLNXT(S2) ;ANY 'NEXT' VOLUME FOR THIS STRUCTURE ??
JRST ALIA.4 ;NO,,LETERRIP !!!
PUSHJ P,FNDDSK ;YES,,GO FIND IT IN OUR DATA BASE
JUMPF ALIA.9 ;NOT FOUND,,THATS AN ERROR
SKIPN .VLPTR(S1) ;ANY POINTERS SET UP ???
JRST ALIA.9 ;YES,,THATS AN ERROR
MOVE S2,S1 ;OK,,SET POINTER TO THIS VOLUME
JRST ALIA.3 ;AND CHECK OUT THIS VOLUME
ALIA.4: MOVE P2,.VLNAM(P1) ;DEFAULT TO THE STRUCTURE NAME
MOVX S1,.STALS ;GET THE ALIAS BLOCK TYPE
PUSHJ P,A$FNDB## ;FIND IT IN THE MESSAGE
JUMPF ALIA.5 ;NOT THERE,,JUST MOUNT IT
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
HRLI S1,(POINT 7,) ;MAKE A POINTER TO IT
$CALL S%SIXB ;CONVERT IT
MOVE P2,S2 ;SAVE THE ALIAS NAME
MOVE S1,P2 ;GET THE ALIAS NAME IN S1
PUSHJ P,I$VDEV## ;VALIDATE THE DEVICE NAME
JUMPT ALIA.7 ;NO GOOD IF DEVICE ALREADY EXISTS
ALIA.5: MOVE S1,P2 ;GET THE ALIAS NAME
PUSHJ P,D$FCAT ;FIND THE CATALOG ENTRY
JUMPF ALIA.6 ;ITS OK IF WE CAN'T
MOVE S1,CATLEN+.CTVID(S1) ;GET THE PRIMARY VOL NAME
PUSHJ P,FNDDSK ;FIND ITS VOL BLOCK
JUMPF ALIA.6 ;DOESN'T HAVE TO BE THERE
CAMN S1,P1 ;SAME AS THE ONE WE'RE MOUNTING?
JRST ALIA.6 ;YES
LOAD S2,.VLFLG(S1),VL.STA ;GET STR STATUS
CAIN S2,%STAMN ;MOUNTED?
JRST ALIA.6 ;THEN NOTHING TO DO
MOVEI S2,.OTMNT ;GET OBJECT TYPE MOUNT
MOVEM S2,CATOBJ+OBJ.TY ;SAVE IT
MOVE S2,.VLUCB(S1) ;GET UCB ADDR
MOVE S2,.UCBNM(S2) ;GET UNIT NAME
MOVEM S2,CATOBJ+OBJ.UN ;SAVE IN OBJECT BLOCK
SETZM CATOBJ+OBJ.ND ;NO NODE INFO
$WTO (<Deleting duplicate volume>,<Unit ^W/.VLVID(S1)/ for structure ^W/.VLNAM(S1)/>,CATOBJ,<$WTFLG(WT.SJI)>)
PUSHJ P,DELVOL ;DELETE THE OLD ONE
ALIA.6: EXCH P2,.VLNAM(P1) ;SWAP ALIAS NAME WITH OLD NAME
MOVE S1,P1 ;GET THE VOLUME BLOCK ADDRESS
PUSHJ P,D$GENC ;GENERATE A CATALOG ENTRY
JUMPF ALIA.8 ;CAN'T
LOAD S1,.OFLAG(M),.MTWLK ;GET WRITE LOCKED BIT
MOVEM S1,WRTLCK ;SAVE IT
MOVE S1,P1 ;GET VOL BLOCK ADDRESS
MOVE S2,.VLNAM(P1) ;GET STR NAME
PUSHJ P,SNDBLD ;BUILD THE STRUCTURE
$RETT ;RETURN
ALIA.7: MOVEI S1,[ITEXT (<Device ^W/P2/ already exists>)]
JRST ALIA.E ;ACK THE ERROR AND RETURN
ALIA.8: EXCH P2,.VLNAM(P1) ;RESTORE ORIGINAL STR NAME
SKIPA S1,[EXP [ITEXT (<^W/P2/ has outstanding allocations>)]]
ALIA.9: MOVEI S1,[ITEXT (<All required volumes are not spinning>)]
ALIA.E: $ACK (<Invalid mount request>,<^I/(S1)/>,MDAOBJ,.MSCOD(M))
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL CHKSTR - ROUTINE TO CHECK FOR STRUCTURE AVAILABILITY
;CALL: S1/ The VOL Address of the Primary VOL Block
;
;RET: True Always
TOPS10<
CHKSTR: PUSHJ P,.SAVE1 ;SAVE P1 FOR A SECOND
$SAVE AP ;SAVE AP ALSO
MOVE P1,S1 ;SAVE THE VOL BLOCK ADDRESS
LOAD S1,.VLFLG(P1),VL.STA ;GET THE STRUCTURE STATUS
LOAD S2,.VLFLG(P1),VL.LCK ;GET THE STRUCTURE LOCK CODE
CAXN S1,%STAMN ;IS THE STRUCTURE MOUNTED ???
CAXE S2,%LOCKD ; AND IS IT LOCKED ???
JRST CHKS.1 ;NO,,TRY REASSIGNMENT
MOVE S1,P1 ;GET THE VOL BLOCK ADDRESS BACK
PUSHJ P,FNDOWN ;ANYONE STILL OWN IT ???
JUMPT .RETT ;YES,,RETURN NOW
MOVE S1,.VLNAM(P1) ;GET THE STRUCTURE NAME
MOVEM S1,MDAOBJ+OBJ.UN ;SAVE IT
$WTO (<This locked structure has a zero mount count^T/BELLS/>,,MDAOBJ)
MOVE S1,P1 ;GET THE VOL BLK ADDR IN S1
SETZ S2, ;NO DISMOUNT FLAGS
PUSHJ P,SNDDSM ;DISMOUNT THE STRUCTURE
$RETT ;RETURN
CHKS.1: CAXE S1,%STAMN ;ARE WE MOUNTED AT LEAST ??
$RETT ;NO,,RETURN
MOVE S1,.VLUCB(P1) ;YES,,GET THE UCB ADDRESS
PUSHJ P,MATUNI ;GO TRY TO REASSIGN THE UNIT
$RETT ;AND RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL D$LOCK - PROCESS LOCK AND UNLOCK MESSAGES
;CALL: M/ Addrs of incoming LOCK and UNLOCK message
;
;RET: True, with some of the VOL database changed
TOPS10<
D$LOCK: TDZA S1,S1 ;FLAG THE LOCK ENTRY POINT
D$ULOK: MOVEI S1,1 ;FLAG UNLOCK ENTRY
$SAVE <P1,P2> ;SAVE P1 AND P2
MOVE P1,S1 ;SAVE THE ENTRY FLAG
MOVX S1,.STRDV ;BLOCK TYPE - STRUCTURE NAME
PUSHJ P,A$FNDB## ;FIND OUT WHAT STR OPR IS TALKING ABOUT
JUMPF E$IMO## ;NOT THERE, TOO BAD
HRROI S1,0(S1) ;AIM AT THE STR NAME
$CALL S%SIXB ;CONVERT IT TO 6BIT
MOVE S1,S2 ;MOVE THE STR NAME INTO PLACE
PUSHJ P,FNDISK ;FIND THE VOL BLOCK FOR THAT STR
JUMPF E$NSD## ;CAN'T, THAT'S AN ERROR
MOVE P2,S1 ;SAVE ADDR OF VOL BLOCK
LOAD S1,.VLFLG(P2),VL.LCK ;GET THE LOCK CODE
MOVEI S2,[ASCIZ/not/] ;TRYING UNLOCK BUT STR NOT LOCKED !!!
CAXN S1,%UNLCK ;IS IT UNLOCKED?
JUMPN P1,LOCK.1 ;YES, DON'T ALLOW ANOTHER UNLOCK
MOVEI S2,[ASCIZ/already/] ;ALREADY LOCKED AND TRYING AGAIN !!!
CAXN S1,%LOCKD ;IS IT LOCKED?
JUMPE P1,LOCK.1 ;YES, DON'T ALLOW ANOTHER LOCK
MOVX S1,VL.REM ;ON A LOCK
SKIPN P1 ; DEFAULT TO UNLOADING
IORM S1,.VLFLG(P2) ; THE STRUCTURE
LOAD S2,.OFLAG(M),LC.NUL ;GET THE /NOUNLOAD BIT
SKIPN P1 ;ON AN UNLOCK
SKIPE S2 ; OR A LOCK /NOUNLOAD
ANDCAM S1,.VLFLG(P2) ; DON'T UNLOAD THE STRUCTURE
LOAD S1,.VLFLG(P2),VL.LCK ;GET THE LOCK CODE BACK
CAXN S1,%LOCKP ;IS A LOCK PENDING?
JUMPN P1,CLRPND ;YES, 'UNLOCK' CLEARS THE LOCK REQUEST
CAXN S1,%ULCKP ;IS AN UNLOCK PENDING?
JUMPE P1,CLRPND ;YES, 'LOCK' CLEARS THE UNLOCK REQUEST
CAXE S1,%LOCKP ;WAS IT PENDING A LOCK
CAXN S1,%UNLCK ; OR AN UNLOCK?
SKIPA ;ONE OF THOSE, GOT SOME WORK TO DO
JRST LOCK.0 ;NO PENDING REQUEST, CONTINUE
LOAD S1,.VLNAM(P2) ;GET BACK THE STR NAME
PUSHJ P,DMSLOK ;PENDING EITHER, CANCEL IT
LOAD S1,.VLNAM(P2) ;GET BACK THE STR NAME
PUSHJ P,CLRELN ;CLEAR THE EVENT NOTIFICATION, TOO
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Now we've ruled out the funny state transitions
LOCK.0: MOVX S1,.ORTIM ;BLOCK TYPE FOR DATE/TIME ARGUMENT
PUSHJ P,A$FNDB## ;GET THAT BLOCK
SKIPT ;IS THERE ONE?
SKIPA S1,G$NOW## ;NO, ASSUME ACTION NOW
MOVE S1,0(S1) ;YES, GET THE LOCK TIME
CAMGE S1,G$NOW## ;IS TIME IN THE FUTURE?
MOVE S1,G$NOW## ;NO, MAKE IT THE PRESENT
MOVX S2,%LOCKP ;SAY PENDING
SKIPE P1 ;IS IT A LOCK?
MOVX S2,%ULCKP ;NO, SAY UNLOCK PENDING
STORE S2,.VLFLG(P2),VL.LCK ;SAVE THE STATUS
MOVEM S1,.VLLTM(P2) ;AND NOTE THE TIME AT WHICH IT HAPPENED
CAMN S1,G$NOW## ;IS IT TO HAPPEN NOW?
PJRST LOKSTR ;YES, GO DO IT!
$ACK (<Structure ^W/.VLNAM(P2)/>,<^W/LCKTB1(P1)/ set for ^H/.VLLTM(P2)/>,,.MSCOD(M))
MOVX S2,INSVL.(%EVLCK,EV.TYP) ;GET EVENT TYPE OF LOCK
MOVEM S2,TMPVSL+.EVTYP ;SAVE IN TEMP BLOCK
MOVEM S1,TMPVSL+.EVUDT ;AND SAVE THE TIME TO WAKE UP
MOVEI S1,LOCTIM ;ROUTINE TO CALL AT THAT TIME
MOVEM S1,TMPVSL+.EVRTN ;SAVE THAT
LOAD S1,.VLNAM(P2) ;GET THE STR NAME
MOVEM S1,TMPVSL+.EVMSZ ;SAVE THAT, TOO
MOVEI S1,.EVMSZ+1 ;MINIMAL BLOCK, WITH 1 DATA WORD
MOVEI S2,TMPVSL ;THERE'S THE ARG BLOCK
PUSHJ P,S$EVENT## ;CALL ME BACK IN A MINUTE OR AN HOUR
JUMPN P1,.RETT ;IF AN UNLOCK, THAT'S ALL
MOVE S1,P2 ;GET THE VOL BLK ADRS
PJRST LOCN.I ;NOTIFY THE USERS
LOCK.1: $ACK (<Structure ^W/.VLNAM(P2)/ is ^T/0(S2)/ locked>,,,.MSCOD(M))
MOVE S1,P2 ;GET THE VOL BLK ADDR IN S1
PUSHJ P,CHKSTR ;CHECK THE MOUNT STATUS
$RETT ;TELL OPR HE IS IN ERROR AND RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here to clear a pending lock or unlock and set the
; state of the vol block back to unlocked or locked, respectively
; P1/ 0 for LOCK, -1 for UNLOCK
; P2/ VOL BLK adrs
CLRPND: MOVX S2,%LOCKD ;ASSUME CANCELLING AN UNLOCK
SKIPE P1 ;OPR SAID LOCK?
MOVX S2,%UNLCK ;NO, CANCELLING A LOCK
STORE S2,.VLFLG(P2),VL.LCK ;SAVE IN THE VOL BLOCK
ZERO .VLLTM(P2) ;NO MORE LOCK TIME
$ACK(<Structure ^W/.VLNAM(P2)/ pending ^W/LCKTB2(P1)/ canceled>,,,.MSCOD(M))
MOVE S1,.VLNAM(P2) ;GET THE STRUCTURE NAME
PUSHJ P,DMSLOK ;REMOVE ALL THE PENDING TIMERS
MOVE S1,.VLNAM(P2) ;GET THE STRUCTURE NAME
PUSHJ P,CLRELN ;REMOVE THE PENDING NOTIFICATION TIMER
MOVE S1,P2 ;GET THEN PRIMARY VOL BLOCK
MOVEI S2,[ITEXT(<LOCK for structure ^W/.VLNAM(P2)/ canceled>)]
PUSHJ P,NSTUSR ;TELL THE USERS THE GOOD NEWS
$RETT
SUBTTL TIMER ROUTINES FOR LOCK AND UNLOCK
;These routines are called when the lock or unlock timer
; goes off. The scheduler calls here as the action routine
; for the timer.
; S1/ Event block adrs
LOCTIM: $SAVE <P1>
LOAD S1,.EVMSZ(S1) ;GET THE STRUCTURE NAME
PUSHJ P,FNDISK ;GET THE VOL BLOCK
JUMPF .RETT ;STR WENT AWAY. STRANGE.
MOVE P1,S1 ;SAVE THE ADRS OF THE BLOCK
LOAD S1,.VLFLG(P1),VL.LCK ;GET THE LOCK STATE
CAXN S1,%LOCKP ;LOCK PENDING TIMER GONE OFF?
JRST LOKS.1 ;YES, LOCK IT UP!
CAXN S1,%ULCKP ;UNLOCK PENDING TIMER?
JRST UNLOCK ;YES, UNLOCK IT
$RETT ;WIERD,,TIMER WITH NOTHING PENDING
;Here to lock or unlock a structure and inform the operator
;
;CALL: P1/ 0 for LOCK, -1 for UNLOCK
; P2/ VOL block adrs
LOKSTR: EXCH P1,P2 ;SWAP VOL BLK ADRS AND LOCK/UNLOCK FLAG
JUMPN P2,UNLOCK ;GO UNLOCK THE STR
LOKS.1: LOAD S1,.VLNAM(P1) ;GET THE STR NAME BACK
PUSHJ P,I$LOCK## ;LOCK IT UP
JUMPF [$WTO(<Can't LOCK structure ^W/.VLNAM(P1)/>,,,$WTFLG(WT.SJI))
JRST UNLC.2] ;AND CLEAR THE STATUS
$WTO (<Structure ^W/.VLNAM(P1)/ locked>,,,$WTFLG(WT.SJI))
MOVE S1,.VLNAM(P1) ;GET THE STR NAME
PUSHJ P,CLRELN ;CLEAR ANY OUTSTANDING LOCK NOTIFY EVENTS
;DON'T CLEAR LOCK TIMER EVENTS,
;SINCE WE MAY BE HERE ON ONE OF THOSE
;EVENTS, AND THE SERVICE ROUTINE EXPECTS
;TO CLEAN IT UP
MOVE S1,P1 ;AIM AT THE PRIMARY VOL BLOCK
MOVEI S2,[ITEXT(<Structure ^W/.VLNAM(P1)/ locked>)]
PUSHJ P,NSTUSR ;TELL ALL THE USERS THE BAD NEWS
LOKS.2: MOVX S1,%LOCKD ;GET LOCKED STATUS
STORE S1,.VLFLG(P1),VL.LCK ;SAVE THE LOCK STATUS
SETZM .VLLTM(P1) ;NO TIME, EITHER
MOVE S1,P1 ;GET THE VOL BLK ADDR IN S1
PUSHJ P,CHKSTR ;CHECK FOR OTHER USERS
$RETT ;RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here if it is an UNLOCK command. P1/ VOL block adrs
UNLOCK: LOAD S1,.VLNAM(P1) ;GET THE STR NAME BACK
PUSHJ P,I$UNLK## ;CLEAR THE LOCK
JUMPT UNLC.1 ;WINS, TELL OPR
$WTO (<Can't UNLOCK structure ^W/.VLNAM(P1)/>,,,$WTFLG(WT.SJI))
PJRST LOKS.2 ;AND SET IT STILL LOCKED
UNLC.1: MOVEI S2,[ITEXT(<Structure ^W/.VLNAM(P1)/ unlocked>)]
$WTO (<^I/0(S2)/>,,,$WTFLG(WT.SJI)) ;TELL THE OPERATOR
MOVE S1,P1 ;GET THE VOL ADDRESS IN S1
PUSHJ P,NSTUSR ;TELL THE USERS ALSO
UNLC.2: MOVX S1,%UNLCK ;GET UNLOCKED CODE
STORE S1,.VLFLG(P1),VL.LCK ;SET THE FIELD
SETZM .VLLTM(P1) ;NO TIME, EITHER
MOVE S1,P1 ;GET THE VOL ADDRESS IN S1
SKIPE S1,.VLUCB(P1) ;GET THE UCB ADDRESS (SHOULD NOT SKIP)
PUSHJ P,MATUNI ;TRY TO MOUNT THE VOLUME
$RETT ;RETURN IN ANY CASE
>;END TOPS10
SUBTTL LOCNOT - Notify users (countdown) of pending locks
;This routine is called when an event timer for a structure lock goes off
; It finds the structure data base, and notifies all remaining users
; of that structure of the time remaining on the str.
; If there are some left, then another entry is put into the timer queue
; for the next countdown time to notify.
;Call -
; S1/ Adrs of Event block for the countdown notification
TOPS10<
DEFINE UDTMIN(N),<<<N>*^O1000000>/^D<24*60>> ;UDT REPRESENTATION OF N MINUTES
MAXLMN==^D7 ;MAX EXP OF 2 AT WHICH TO NOTIFY USERS
LMNTAB: UDTMIN (^D128) ;2**8 = TOO BIG AN ELEMENT, SAY THE MAX
UDTMIN (^D1) ;2**0 = 1 MINUTE
UDTMIN (^D2) ;2**1 = 2 MINUTES
UDTMIN (^D4) ;2**2 = 4 MINUTES
UDTMIN (^D8) ;2**3 = 8 MINUTES
UDTMIN (^D16) ;2**4 = 16 MINUTES
UDTMIN (^D32) ;2**5 = 32 MINUTES
UDTMIN (^D64) ;2**6 = 64 MINUTES
LOCNOT: MOVE S1,.EVMSZ+0(S1) ;GET THE STRUCTURE NAME
PUSHJ P,FNDISK ;FIND THE PRIMARY VOLUME BLOCK
JUMPF .RETT ;NOT THERE, QUIT, NO RE-RENTRY TO TIMER QUEUE
;Internal entry with S1/ Vol block adrs
LOCN.I: $SAVE <P1,P2,P3,P4> ;SOME WORK SPACE
MOVE P1,S1 ;SAVE PRI VOL BLK ADRS
MOVE P2,.VLLTM(P1) ;GET T=0
SUB P2,G$NOW## ;FIGURE UDT LEFT IN THIS TIMER
JUMPLE P2,.RETT ;WE'RE HERE TOO LATE, GET OUT
MOVE P3,P2 ;NO, GET UDT LEFT
IDIVI P3,UDTMIN(1) ;CONVERT TO MINUTES LEFT
MOVEI S2,[ITEXT(<Structure ^W/.VLNAM(P1)/ will be locked in ^D/P3/ minutes>)]
TLNE P2,-1 ;MORE THAN A DAY LEFT?
MOVEI S2,[ITEXT(<Structure ^W/.VLNAM(P1)/ will be locked at ^H/.VLLTM(P1)/>)]
PUSHJ P,NSTUSR ;NOTIFY ALL USERS OF THE STRUCTURE
JFFO P3,.+2 ;FIND ORDER OF MAGNITUDE OF TIME LEFT
$RETT ;?? CAN'T GET HERE, QUIT
SUBI P4,^D35 ;CONVERT TO -35 TO 0 RANGE
JUMPE P4,.RETT ;LESS THAN A MINUTE,, QUIT
MOVNS P4 ;TO 0 TO 35
CAIL P4,MAXLMN ;BIGGER THAN MAX LOG MINUTES?
SETZ P4, ;YES, JUST SAY THE MOST WE KNOW
MOVE S2,LMNTAB(P4) ;GET THEN NUMBER OF MINUTES TO WAIT
ADD S2,G$NOW## ;SET THAT AS NEXT NOTIFY TIME
MOVE S1,.VLNAM(P1) ;GET THE STR NAME AGAIN
PJRST LNEVENT ;MAKE A NEW LOCK NOTIFY EVENT BLOCK
> ;END TOPS10 CONDITIONAL
SUBTTL CLEAR LOCKS ON STRUCTURE DISMOUNT
;This routine is called when a structure is dismounted, so that
; Any pending event blocks can be cleaned up.
; If we don't clean 'em up, and another structure gets mounted
; before the timer goes off, then that (new) structure
; will bear the brunt of the OPRs old LOCK or UNLOCK.
; Also, any notify request blocks for this structure are cleaned up.
;Call -
; S1/ Structure name just dismounted
;Returns -
; TRUE (always)
TOPS10<
CLRELN: MOVEI S2,%EVNLC ;GET EVENT TYPE - LOCK NOTIFY
SKIPA ;ENTER THE COMMON CODE
DMSLOK: MOVEI S2,%EVLCK ;GET EVENT TYPE - PENDING LOCK
$SAVE <P1,P2>
DMOVE P1,S1 ;PRESERVE THE STR NAME, EVENT TYPE
MOVE S1,G$EVENT## ;GET THE LIST HANDLE
$CALL L%FIRST ;GET THE FIRST GUY
DSML.1: JUMPF .RETT ;NONE THERE, OH WELL
LOAD TF,.EVTYP(S2),EV.TYP ;GET THE EVENT TYPE
CAMN TF,P2 ;IS IT THE RIGHT TYPE OF EVENT?
CAME P1,.EVMSZ(S2) ;YES, IS THIS THE STR BEING DISMOUNTED?
SKIPA ;NOT A LOCK OR WRONG STRUCTURE,,SKIP
$CALL L%DENT ;LOCK OR NOTIFY FOR THIS STR, DELETE IT
PUSHJ P,L%NEXT ;EITHER WAY,,GET THE NEXT ENTRY
JRST DSML.1 ;AND CHECK IT OUT
> ;END TOPS10 CONDITIONAL
SUBTTL LNEVENT - Set up a Lock notification event
;This routine is called whenever someone wants to put up a lock
; notification event for a particular structure.
; LOCNOT will be called at the specified time with
; the adrs of the lock notication event block.
; Call -
; S1/ SIXBIT structure name
; S2/ UDT at which to be notified
;Returns
; TRUE (ALWAYS)
TOPS10<
LNEVENT: MOVEM S1,TMPVSL+.EVMSZ+0 ;SAVE STR NAME AS FIRST (ONLY) DATA ARG
MOVEM S2,TMPVSL+.EVUDT ;SAVE WAKE-UP TIME
MOVX S1,INSVL.(%EVNLC,EV.TYP) ;EVENT TYPE
MOVEM S1,TMPVSL+.EVTYP ;NO FLAGS,
MOVEI S1,LOCNOT ;ROUTINE TO RUN AT THAT TIME
MOVEM S1,TMPVSL+.EVRTN ;SAVE THAT TOO
MOVEI S1,.EVMSZ+1 ;MINIMAL EVENT BLOCK, WITH 1 DATUM
MOVEI S2,TMPVSL ;THERE'S THE BLOCK
PJRST S$EVENT## ;SEE ME LATER!
> ;END TOPS10 CONDITIONAL
SUBTTL D$LCKM - ROUTINE TO PROCESS THE RESET AFTER LOCK MESSAGE
;CALL: M/ The Message Address
;
;RET: True Always
TOPS10< INTERN D$LCKM ;MAKE IT GLOBAL
D$LCKM: PUSHJ P,.SAVE2 ;SAVE P1 & P2 FOR A SECOND
MOVE S1,.RSTJB(M) ;GET THE USERS JOB NUMBER
PUSHJ P,FNDMDR ;FIND HIS MDR
JUMPF .RETT ;NOT THERE,,RETURN NOW
LCKM.0: LOAD P2,.MRCNT(AP),MR.CNT ;GET THE VSL REQUEST COUNT
MOVNS P2 ;NEGATE IT
MOVSS P2 ;MOVE RIGHT TO LEFT
HRRI P2,.MRVSL(AP) ;CREATE VSL SEARCH AOBJN AC
LCKM.1: MOVE S1,0(P2) ;PICK UP A VSL ADDRESS
LOAD P1,.VSFLG(S1),VS.TYP ;GET THE VOL SET TYPE
SKIPE .VSUCB(S1) ;IS THE VOL SET MOUNTED
CAXE P1,%DISK ; AND IS IT A STRUCTURE ???
JRST LCKM.2 ;NO TO EITHER,,TRY NEXT
MOVE S2,.VSVOL(S1) ;PICK UP THE VOL BLK ADDRESS
LOAD P1,.VLFLG(S2),VL.LCK ;GET THE VOL LOCK CODE
CAXN P1,%LOCKD ;IS IT LOCKED ???
PUSHJ P,D$DSLM ;YES,,TAKE THE STRUCTURE AWAY !!!
LCKM.2: AOBJN P2,LCKM.1 ;CHECK ALL VSL'S
$RETT ;THEN RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL VSREOV - ROUTINE TO SEND END OF VOLUME MSG TO TAPE LABELER
;Send a End Of Volume-Set Message to the Tape Labeler on a Volume
; Switch Request in which there are no more Volumes in the
; Set.
;CALL: S1/ The UCB Address
; S2/ Returned status (%VEOF, %VABT, %VTMV)
;
;RET: True Always
TOPS10 <
VSREOV: PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
MOVE P1,S1 ;SAVE THE UCB ADDRESS
PUSH P,S2 ;SAVE THE STATUS BITS
MOVX S1,.QOVSD ;GET VOLUME SET DIRECTIVE MSG TYPE
PUSHJ P,LBLHDR ;SETUP THE MSG TO TAPE LABELER
AOS G$MSG+.OARGC ;BUMP ARG COUNT BY 1
POP P,G$MSG+.MSFLG ;INSERT THE STATUS BITS
MOVEI S2,G$MSG+.OHDRS ;GET THE FIRST BLOCK ADDRESS
MOVX S1,.VSDBL ;GET THE BLOCK TYPE
STORE S1,ARG.HD(S2),AR.TYP ;SAVE IN THE MESSAGE
MOVX S1,ARG.DA+VSDLEN ;GET THE BLOCK LENGTH
STORE S1,ARG.HD(S2),AR.LEN ;SAVE IT IN THE MESSAGE
ADDM S1,G$SAB##+SAB.LN ;BUMP THE SAB LENGTH
MOVSS S1 ;MOVE RIGHT TO LEFT
ADDM S1,G$MSG+.MSTYP ;AND BUMP THE MESSAGE LENGTH
ADDI S2,ARG.DA ;POINT TO THE BLOCK DATA
MOVE S1,.UCBNM(P1) ;GET THE OLD DEVICE NAME
MOVEM S1,.VSDID(S2) ;SAVE IT IN THE MESSAGE
SETZM .VSDCD(S2) ;NO NEW DEVICE NAME !!!
PUSHJ P,C$SEND## ;SEND THE MSG OFF
$RETT ;AND RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL DELETE - ROUTINE TO DELETE ALL NEW VOL SETS FOR A USER
;CALL: S1/ The VSL Address of one of those to be deleted
; AP/ The MDR Address
;
;RET: True Always
;A NEW Volume Set is defined to be one whose LINK code is the
;same as the one in the VSL that was passed as an argument
;to this routine AND whose VS.WAL bit is still up.
D$DLVS:: ;MAKE IT GLOBAL
DELETE: PUSHJ P,.SAVE3 ;SAVE P1 & P2 & P3 FOR A MINUTE
LOAD P2,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT
JUMPE P2,DELMDR ;NOTHING THERE,,DELETE THE MDR
LOAD P1,.VSRID(S1),VS.LNK ;GET THE LINK CODE WE ARE LOOKING FOR
MOVEI P3,.MRVSL(AP) ;POINT TO THE VSL LIST
DELE.1: MOVE S1,0(P3) ;GET A VSL ADDRESS
LOAD S2,.VSRID(S1),VS.LNK ;GET ITS LINK CODE
LOAD TF,.VSFLG(S1),VS.WAL ;GET THE WAITING FOR ALLOCATION BIT
CAMN P1,S2 ;DO THE LINK CODES MATCH ???
SKIPN TF ; AND IS HE WAITING FOR ALLOCATION ???
JRST DELE.2 ;WRONG LINK CODE OR NOT WAITING,,SKIP
PUSHJ P,DELVSL ;YES,,DELETE THE VSL
SKIPA ;LOOK AT NEXT VSL
DELE.2: AOS P3 ;POINT TO THE NEXT VSL ADDRESS
SOJG P2,DELE.1 ;CONTINUE FOR ALL VSL'S
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT
SKIPN S1 ;THERE ARE MORE,,DON'T DELETE THE MDR
PUSHJ P,DELMDR ;NO MORE REQUESTS,,DELETE THIS MDR
$RETT ;RETURN
SUBTTL REMOVE - ROUTINE TO DELETE A SPECIFIC VSL AND RETRY THE MOUNT
;CALL: S1/ The VSL Address
; AP/ The MDR Address
;
;RET: True Always
TOPS10<
D$REMO::
REMOVE: PUSHJ P,.SAVE1 ;SAVE P1 FOR A SECOND
LOAD P1,.VSRID(S1),VS.LNK ;GET THE VSL LINK CODE
PUSHJ P,DELVSL ;DELETE THE BAD VSL
LOAD S2,.MRCNT(AP),MR.CNT ;ANY REQUESTS LEFT ???
JUMPE S2,DELMDR ;NO,,DELETE HIS MDR
MOVNS S2 ;NEGATE THE COUNT
MOVSS S2 ;MOVE RIGHT TO LEFT
HRRI S2,.MRVSL(AP) ;CREATE VSL SEARCH AOBJN AC
REMO.1: MOVE S1,0(S2) ;GET A VSL ADDRESS
LOAD TF,.VSRID(S1),VS.LNK ;GET ITS LINK CODE
CAME TF,P1 ;DO THEY MATCH ???
JRST [AOBJN S2,REMO.1 ;NO,,TRY NEXT
$RETT ] ;NO MORE,,RETURN
MOVE P1,S1 ;SAVE THE VSL ADDRESS
PUSHJ P,D$ALOC ;TRY TO PERFORM ALLOCATION ONCE AGAIN
JUMPF [JUMPL S1,.RETT ;ALLOCATION POSTPONED,,JUST RETURN
MOVE S1,P1 ;NO GOOD,,GET THE VSL ADDRESS BACK
PJRST DELETE ] ; AND DELETE THE VOL SETS JUST ADDED
MOVE S1,P1 ;GET THE VSL ADDRESS BACK
PUSHJ P,MNTVSL ;RETRY THE MOUNT
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL DELVSL - ROUTINE TO DELETE A VSL
;CALL: S1/ The VSL Address
; AP/ The MDR Address
;
;RET: True Always
;AC Usage in this Subroutine
;
; P1/ VSL Entry
; P2/ VOL Entry
; P3/ UCB Entry
; P4/ VOL AOBJN AC
TOPS10<
D$DVSL::
DELVSL: PUSHJ P,.SAVE4 ;SAVE P1-P4
MOVEI P1,(S1) ;GET THE VSL ADDRESS IN P1
CAIN P1,TMPVSL ;IS THIS TEMPORARY VSL?
JRST DELV.0 ;YES..DON'T TRY TO DELETE IT
MOVE S2,.VSFLG(P1) ;GET THE VSL FLAG WORD
TXO S2,VS.UAL ;LITE 'USER ALLOCATED' TO STOP RECURSION
MOVEM S2,.VSFLG(P1) ;SAVE THE NEW VSL STATE
MOVE S1,P1 ;GET BACK VSL ADRS
PUSHJ P,ALCVSL ;RETURN HIS RESOURCES TO THE ALLOC POOL
MOVE S1,P1 ;RESTORE THE VSL ADDRESS
LOAD S2,.VSFLG(S1),VS.WAL ;GET THE 'WAITING FOR ALLOCATION' BIT
SKIPN S2 ;IF ALLOCATED,,THEN
PUSHJ P,RETBMA ; REMOVE HIS CLAIM ON THESE RESOURCES
DELV.0: LOAD P4,.VSCVL(P1),VS.CNT ;GET THE VOLUME COUNT
JUMPE P4,DEL.8A ;NO VOLUMES,,SKIP THIS
MOVNS P4 ;MAKE IT NEGATIVE
HRLZS P4 ;CREATE A VOL AOBJN AC (-COUNT,,0)
HRRI P4,.VSVOL(P1) ;GET THE VOL LIST ADDRESS IN RIGHT HALF
DELV.1: MOVE P2,0(P4) ;PICK UP THE CURRENT VOL ADDRESS
LOAD S1,.VLOWN(P2),VL.CNT ;GET THE VSL COUNT IN S1
MOVNS S1 ;MAKE IT NEGATIVE
HRLZS S1 ;MOVE RIGHT TO LEFT
HRRI S1,.VLVSL(P2) ;CREATE A VSL AOBJN AC
DELV.2: MOVE P3,0(S1) ;PICK UP THE VSL ADDRESS + FLAGS IN P3
CAIN P1,0(P3) ;FIND THIS USERS VSL ADDRESS IN THE VOL
JRST DELV.3 ; ENTRY.
AOBJN S1,DELV.2 ;CONTINUE TILL FOUND
$STOP (CFV,Can't Find VSL Address in VOL Entry)
DELV.3: $PACK S1 ;PACK THE VOL VSL LIST
DECR .VLOWN(P2),VL.CNT ;AND DECRIMENT THE USER REQUEST COUNT
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
DELV.5: SKIPN S2,.VLUCB(P2) ;IS THE VOLUME MOUNTED ???
JRST [MOVE S1,P2 ;NO,,GET THE VOL ADDRESS IN S1
PUSHJ P,DELVOL ; DELETE THE VOLUME
JRST DELV.8 ] ; AND GET THE NEXT VOLUME
LOAD S1,.UCBST(S2),UC.DVT ;GET THE DEVICE TYPE
CAXE S1,%TAPE ;IS IT A TAPE VOLUME ???
JRST DELV.8 ;NO,,GET NEXT VOLUME
LOAD S1,.VLOWN(P2),VL.CNT ;GET THE REQUEST COUNT
JUMPG S1,DELV.6 ;MULTIPLE REQUESTORS,,TRY ALLOCATION
JRST DELV.7 ;OTHERWISE UNLOAD THE DRIVE
;Here when a volume referenced by the VSL has other requestors
;See if we can give the volume to another requestor.
DELV.6: LOAD S1,.VLFLG(P2),VL.LBT ;GET LABEL TYPE
PUSHJ P,GETLBT ;AND MAP TO EASY CODE
CAXE S1,%LABEL ;IS IT A LABELED VOLUME?
JRST DELV.7 ;NO, UNLOAD THIS USER'S TAPE
MOVE S1,.VLUCB(P2) ;COPY UCB NAME TO ARG REG
PUSHJ P,MATUNI ;TRY TO GIVE IT AWAY
JRST DELV.8 ;CONTINUE WITH NEXT VOLUME
DELV.7: MOVE S1,P2 ;AIM AT THIS VOLUME
TXNE P3,VL.OWN ;DID WE EVER OWN THIS VOLUME ???
PUSHJ P,VLUNLOAD ;UNLOAD AND BREAK LINKS FOR THIS VOL
DELV.8: AOBJN P4,DELV.1 ;CONTINUE THROUGH ALL VOLUMES
DEL.8A: LOAD S1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT IN S1
MOVNS S1 ;MAKE THE VSL COUNT NEGATIVE
HRLZS S1 ;MOVE RIGHT TO LEFT
HRRI S1,.MRVSL(AP) ;POINT TO THE VSL ADDRESS LIST
DELV.9: CAME P1,0(S1) ;FIND THE VSL POS IN THE MDR VSL LIST
JRST [AOBJN S1,DELV.9 ;NOT FOUND,,TRY ALL VSL ADDRESSES
$STOP(VAM,VSL Address is Missing in a MDR) ] ;NONE,,TROUBLE !
$PACK S1 ;PACK THE MDR VSL LIST
DECR .MRCNT(AP),MR.CNT ;AND DECREMENT THE MDR VSL COUNT BY 1
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
CAIN P1,TMPVSL ;IS THIS THE TEMP VSL ???
$RETT ;YES,,JUST RETURN NOW
MOVE S1,VSLQUE ;GET THE VSL QUEUE ID IN S1
MOVE S2,P1 ;GET THE VSL ADDRESS IN S2
PUSHJ P,L%APOS ;POSITION TO THE VSL ENTRY
PUSHJ P,L%DENT ;DELETE THIS VSL ENTRY
$RETT ;RETURN
>
TOPS20 <
D$DVSL::
DELVSL: PUSHJ P,.SAVE4 ;SAVE P1-P4
MOVE P1,S1 ;GET THE VSL ADDRESS IN P1
LOAD P4,.VSCVL(P1),VS.CNT ;GET THE VOLUME COUNT
JUMPE P4,DELV.2 ;NO VOLUMES,,JUST DELETE THE VSL
MOVNS P4 ;MAKE IT NEGATIVE
HRLZS P4 ;CREATE A VOL AOBJN AC (-COUNT,,0)
HRRI P4,.VSVOL(P1) ;GET THE VOL LIST ADDRESS IN RIGHT HALF
DELV.1: MOVE P2,0(P4) ;PICK UP THE CURRENT VOL ADDRESS
SKIPE P3,.VLUCB(P2) ;PICK UP THE CURRENT UCB ADDRESS
SETZM .UCBVL(P3) ;CLEAR THE VOL POINTER IN THE UCB
MOVE S1,VOLQUE ;GET THE VOL QUEUE ID
MOVE S2,P2 ;GET THE VOLUME ENTRY ADDRESS
PUSHJ P,L%APOS ;POSITION TO THE VOLUME ENTRY
PUSHJ P,L%DENT ;AND DELETE IT
AOBJN P4,DELV.1 ;CONTINUE THROUGH ALL VOLUMES
DELV.2: LOAD S1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT IN S1
MOVNS S1 ;MAKE THE VSL COUNT NEGATIVE
HRLZS S1 ;MOVE RIGHT TO LEFT
HRRI S1,.MRVSL(AP) ;POINT TO THE VSL ADDRESS LIST
DELV.3: CAME P1,0(S1) ;FIND THE VSL POS IN THE MDR VSL LIST
JRST [AOBJN S1,DELV.3 ;NOT FOUND,,TRY ALL VSL ADDRESSES
$STOP(VAM,VSL Address is Missing in a MDR) ] ;NONE,,TROUBLE !
$PACK S1 ;PACK THE MDR VSL LIST
DECR .MRCNT(AP),MR.CNT ;AND DECREMENT THE MDR VSL COUNT BY 1
CAIN P1,TMPVSL ;IS THIS THE TEMPORARY VSL ???
$RETT ;YES,,THEN NOTHING TO DELETE !!
MOVE S1,VSLQUE ;GET THE VSL QUEUE ID
MOVE S2,P1 ;GET THE VSL ADDRESS
PUSHJ P,L%APOS ;POSITION TO THE VSL
PUSHJ P,L%DENT ;AND DELETE IT
$RETT ;RETURN
>
SUBTTL ALCVSL - ROUTINE TO RETURN A VSL TO THE ALLOCATION POOL
;CALL: S1/ The VSL Address
;
;RET: TRUE ALWAYS
TOPS10<
D$ALCV:: ;MAKE IT GLOBAL
ALCVSL: PUSHJ P,.SAVE1 ;SAVE P1
HRRZ P1,S1 ;SAVE THE VSL ADDRESS
MOVE S1,P1 ;GET JUST THE VSL ADDRESS
PUSHJ P,CHKOWN ;LOCATE THIS GUYS VSL ADDRESS
MOVX S2,VL.ASK+VL.ASN ;GET ASKED+ASSIGNED STATUS BITS
ANDCAM S2,0(S1) ; AND CLEAR THEM
MOVE S1,P1 ;RESTORE THE VSL ADDRESS
PUSHJ P,RETA%C ;RETURN THE 'A' AND 'C' MATRIX RESOURCES
SKIPN S1,.VSUCB(P1) ;GET ANY UCB ADDRESS
JRST ALCV.2 ;NONE THERE,,SKIP THIS
SETZM .VSUCB(P1) ;CLEAR THE VSL'S UCB POINTER
SETZM .UCBVS(S1) ;CLEAR THE UCB'S VSL POINTER
MOVX S2,UC.VSW ;GET THE VOLUME SWITCH FLAG
ANDCAM S2,.UCBST(S1) ;CLEAR IT
LOAD S2,.VSFLG(P1),VS.TYP ;GET VOLUME SET TYPE
CAXN S2,%TAPE ;IS THIS A TAPE VOLUME SET?
PUSHJ P,SNDVDM ;TELL TAPE LABELER USER IS GONE
ALCV.2: MOVX S1,VS.ALC+VS.OPR ;GET THE 'ALLOCATION'+'OPR' BITS
IORM S1,.VSFLG(P1) ;LITE THEM
ZERO .VSFLG(P1),VS.VSW ;CLEAR THE VOLUME SWITCH FLAG
ZERO .VSCVL(P1),VS.OFF ;RESET THE CURRENT VOL OFFSET
ZERO .VSRID(P1),VS.LNK ;ALSO ZAP THE LINK CODE
SKIPN S1,.VSTXT(P1) ;ANY SECONDARY TEXT ???
JRST ALCV.3 ;NO,,SKIP THIS
LOAD S2,S1,VS.ADR ;GET THE TEXT ADDRESS IN S2
LOAD S1,S1,VS.LEN ;GET THE TEXT LENGTH IN S1
PUSHJ P,M%RMEM ;RETURN IT TO THE FREE POOL
SETZM .VSTXT(P1) ;AND ZAP THE POINTER
ALCV.3: MOVE S1,P1 ;GET THE VSL ADDRESS
LOAD S2,.VSFLG(S1),VS.UAL ;GET THE 'USER ALLOCATED' BIT
SKIPN S2 ;IF 'USER ALLOC',DONT DELETE VSL
PUSHJ P,DELVSL ;DELETE THE VSL
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL DELMDR - ROUTINE TO DELETE AN MDR
;CALL: AP/ The MDR Address
;
;RET: True Always
DELMDR:
TOPS10< PUSHJ P,D$BMTX ;FIND THE USERS 'B' MATRIX ENTRY
JUMPF DELM.1 ;NONE THERE,,SKIP THIS
PUSHJ P,L%DENT ;DELETE IT
PUSHJ P,D$CMTX ;FIND THE USERS 'C' MATRIX ENTRY
SKIPF ;NONE THERE,,SKIP
PUSHJ P,L%DENT ;DELETE IT
SOS PROCNT ;ADJUST THE PROCESS COUNT
> ;END TOPS10 CONDITIONAL
DELM.1: SKIPE S1,.MRQEA(AP) ;ANY QE ???
SETZM .QEMDR(S1) ;YES,,ZAP IT
MOVE S1,MDRQUE ;GET THE MDR QUEUE ID
MOVE S2,AP ;GET THE MDR ADDRESS
PUSHJ P,L%APOS ;POSITION TO THAT MDR ENTRY
PUSHJ P,L%DENT ;DELETE IT
$RETT ;AND RETURN
SUBTTL DELVOL - ROUTINE TO DELETE VOL BLOCKS FROM THE VOL QUEUE
;CALL: S1/ The VOL Address of the VOL you want deleted
;
;RET: True Always
;This routine will delete the volume whose address is passed in S1
;And also delete any VOL Blocks connected to that VOL which can
;Be Deleted
TOPS10 <
DELVOL: PUSHJ P,.SAVE3 ;SAVE P1 & P2 & P3 FOR A MINUTE
MOVE P2,S1 ;SAVE ORIGIONAL VOL ADDR HERE
DELX.0: MOVE P1,S1 ;SAVE AS CURRENT ALSO
LOAD S1,.VLPTR(P1),VL.PRV ;FIND THE PRI VOLUME BLOCK
JUMPN S1,DELX.0 ; IN THE VOL QUEUE
LOAD S1,.VLFLG(P1),VL.STA ;GET THE STRUCTURE STATUS BITS
CAXN S1,%STAMN ;IS IT MOUNTED ???
$RETT ;YES,,JUST RETURN
SKIPE S1,.VLUCB(P2) ;IS THE ARG VOLUME MOUNTED ON A DRIVE ?
SETZM .UCBVL(S1) ;YES,,BREAK UCB VOL LINK
SETZM .VLUCB(P2) ;BREAK VOL UCB LINKS
LOAD S1,.VLOWN(P1),VL.CNT ;GET THE REQUEST COUNT
JUMPN S1,.RETT ;NOT ZERO,,DON'T DELETE THE VOLUME
LOAD S1,.VLFLG(P1),VL.RSN ;GET THE VOLUME RESOURCE NUMBER
PUSHJ P,GIVRSN ;GIVE BACK THAT RESOURCE
DELX.1: MOVE S2,P1 ;GET THE PRI VOL BLK ADDRESS IN S2
LOAD P1,.VLPTR(P1),VL.NXT ;GET NEXT VOL BLK ADDRESS
SKIPE S1,.VLUCB(S2) ;IS THE VOLUME MOUNTED ???
SETZM .UCBVL(S1) ;YES,,ZAP UCB/VOL POINTER
MOVE S1,VOLQUE ;NO,,GET THE VOLUME QUEUE ID
PUSHJ P,L%APOS ;POSITION TO THAT ENTRY
PUSHJ P,L%DENT ;AND DELETE IT
JUMPN P1,DELX.1 ;IF MORE VOL BLKS,,PROCESS'EM
$RETT ;ELSE RETURN
>
SUBTTL GETLBT - ROUTINE TO RECODE THE VOLUME LABEL TYPE
;CALL: S1/ The Volume Label Type
;
;RET: S1/ either %UNLBL (Unlabeled) or %LABEL (Labeled)
TOPS10 <
D$GLBT::
GETLBT: CAXE S1,.TFLBP ;IS THE LABEL TYPE BYPASS LABELS ???
CAXN S1,.TFLTM ;OR IS IT LEADING TAPE MARK ???
JRST GETL.1 ;YES,,EXIT
CAXE S1,.TFLNS ;IS THE LABEL TYPE NON-STANDARD LABESL ?
CAXN S1,.TFLNL ;OR IS IT NO LABELS ???
SKIPA ;YES,,UNLABELED !!!
CAXN S1,.TFLNV ;UNLABELED/NO EOV PROCESSING,,UNLABELED
GETL.1: SKIPA S1,[%UNLBL] ;RETURN %UNLBL IN S1
MOVX S1,%LABEL ;IF LABELED,,RETURN %LABEL IN S1
$RETT ;RETURN
>
SUBTTL FNDDSK - ROUTINE TO FIND A DSK VOL BLOCK USING VOLUME ID
;CALL: S1/ The Volume ID in Sixbit
;
;RET: S1/ The VOL Block Address
TOPS10 <
FNDDSK: PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
MOVE P1,S1 ;SAVE THE VOL ID WE ARE LOOKING FOR
MOVE S1,VOLQUE ;GET THE VOL QUEUE ID
PUSHJ P,L%FIRST ;GET THE FIRST ENTRY
JRST FNDD.2 ;SKIP THE FIRST TIME THROUGH
FNDD.1: MOVE S1,VOLQUE ;GET THE VOL QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT VOL BLOCK
FNDD.2: JUMPF .RETF ;NO MORE,,RETURN VOL NOT FOUND
CAME P1,.VLVID(S2) ;YES,,IS THIS THE VOL WE WANT ???
JRST FNDD.1 ;NO,,SKIP IT
MOVE S1,S2 ;RETURN THE VOL BLOCK ADDRESS IN S1
$RETT ;AND RETURN
> ;END TOPS10
SUBTTL CREVOL - ROUTINE TO CREATE A VOL BLOCK IN VOL QUEUE
;CALL: No Calling Parms
;
;RET: S1/ The VOL Queue Entry
D$CVOL::
CREVOL: MOVE S1,VOLQUE ;GET THE VOL QUEUE ID
PUSHJ P,L%LAST ;POSITION TO THE LAST VOL ENTRY
MOVE S1,VOLQUE ;GET THE VOL QUEUE ID
MOVX S2,VOLLEN ;AND THE VOL ENTRY LENGTH
PUSHJ P,L%CENT ;CREATE A VOL QUEUE ENTRY
MOVE S1,S2 ;GET THE ENTRY ADDRESS IN S1
$RETT ;AND RETURN
SUBTTL USRACK - ROUTINE TO GENERATE AN ACK TO THE USER FOR MOUNT/ALLOC
;CALL: AP/ The MDR Address
;
;RET: True Always
USRACK::PUSHJ P,.SAVE3 ;Save P1 - P3
MOVE S1,[POINT 7,G$MSG] ;GET OUTPUT BYTE POINTER
MOVEM S1,MDBPTR ;SAVE IT FOR LATER
SETZM G$MSG## ;CLEAR THE FIRST WORD...
SKIPN G$OPRA## ;OPERATOR ON DUTY?
$TEXT (MDADBP,<% No operator on duty>) ;NO
LOAD P1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT
MOVNS P1 ;NEGATE IT
MOVSS P1 ;MOVE RIGHT TO LEFT
HRRI P1,.MRVSL(AP) ;CREATE VSL AOBJN AC
LOAD S2,.MRCNT(AP),MR.LNK ;GET THE CURRENT VSL LINK CODE
USRA.0: MOVE P2,0(P1) ;GET A VSL ADDRESS
LOAD S1,.VSRID(P2),VS.LNK ;GET THE VSL LINK CODE
CAME S1,S2 ;DO THEY MATCH ???
JRST USRA.2 ;NO,,SKIP IT
LOAD P3,.VSFLG(P2),VS.ALC ;GET THE ALLOCATE BIT
JUMPE P4,USRA.1 ;If MOUNTR is running, skip the next
LOAD S1,.VSFLG(P2),VS.TYP ;Get the mount request type
CAIE S1,.MNTST ;A structure mount request?
JRST [ $TEXT (MDADBP,<[MOUNTR not running]^J^M[^T/@TYPE(P3)/ request ^T/.VSVSN(P2)/ will be rejected upon MOUNTR startup]>)
JRST USRA.2 ] ;Get the next VSL
USRA.1: $TEXT (MDADBP,<[^T/@TYPE(P3)/ request ^T/.VSVSN(P2)/ queued, request #^D/.VSRID(P2),VS.RID/]>)
USRA.2: AOBJN P1,USRA.0 ;LOOP THROUGH ALL VSL'S
SETZM S1 ;GET A NULL BYTE
PUSHJ P,MDADBP ;MAKE IT ASCIZ
PUSHJ P,USRNOT ;NOTIFY THE USER
$RETT ;AND RETURN
TYPE: [ASCIZ/Mount/]
[ASCIZ/Allocate/]
SUBTTL ACKUSR - ROUTINE TO CREATE AN ACK AFTER THE VOL SET IS MOUNTED
;CALL: S1/ The VSL Address
;
;RET: True Always
ACKUSR: PUSHJ P,.SAVE4 ;SAVE P1 - P4
STKVAR <<QUE,^D30>> ;SETUP A QUEUE FOR VSL'S
LOAD P1,.VSRID(S1),VS.LNK ;GET THE VOL SET LINK CODE
MOVE AP,.VSMDR(S1) ;GET THE MDR ADDRESS
SETZM G$MSG## ;CLEAR THE FIRST WORD OF ACK BUFFER
MOVE S1,[POINT 7,G$MSG] ;GET A BYTE POINTER TO IT
MOVEM S1,MDBPTR ;AND SAVE IT FOR LATER
LOAD P2,.MRCNT(AP),MR.CNT ;GET THE VSL REQUEST COUNT
MOVNS P2 ;NEGATE IT
MOVSS P2 ;MOVE RIGHT TO LEFT
HRRI P2,.MRVSL(AP) ;CREATE VSL AOBJN AC
MOVEI P3,QUE ;GET THE VSL QUEUE ADDRESS
HRLI P3,-^D30 ;GEN THE QUEUE STACK POINTER
PUSH P3,[-1] ;MARK THE END OF THE QUEUE
;Check to make sure user has all required volume sets assigned
ACKU.1: MOVE P4,0(P2) ;GET A VSL ADDRESS
LOAD S2,.VSRID(P4),VS.LNK ;GET ITS LINK CODE
CAME S2,P1 ;DO THEY MATCH ???
JRST ACKU.2 ;NO,,TRY NEXT VSL
MOVE S1,P4 ;GET THE VSL ADDRESS IN S1
PUSHJ P,CHKOWN ;DOES HE OWN THE VOLUME ???
MOVE S2,(S1) ;GET FLAGS
TXNN S2,VL.AAS ;BUT WAS IT ALREADY ASSIGNED BEFORE?
TXNN S2,VL.ASN ;IS IT ASSIGNED?
$RETF ;NO,,RETURN
PUSH P3,P4 ;YES,,QUEUE UP THE VSL ADDRESS
ACKU.2: AOBJN P2,ACKU.1 ;LOOK FOR ANOTHER
;If we get this far, its OK to ack the user
ACKU.3: POP P3,P4 ;GET A VSL ADDRESS OFF THE QUEUE
CAMN P4,[-1] ;ARE WE DONE ???
JRST ACKU.6 ;YES,,ACK THE USER !!!
LOAD P1,.VSCVL(P4),VS.OFF ;GET THE OFFSET TO THE CURRENT VOL
ADDI P1,.VSVOL(P4) ;POINT TO ITS ADDRESS
MOVE P1,0(P1) ;SAVE THE VOL ADDRESS IN P1
SKIPE P2,.VLUCB(P1) ;GET THE UCB ADDRESS IN P2
JRST ACKU.4 ;MUST BE A NON-MDA DEVICE
; Here for non-MDA devices
TOPS10<
MOVE S1,P4 ;GET VSL ADDRESS
PUSHJ P,I$CGEN## ;GET DEVICE TYPE
JUMPF ACKU.3 ;SHOULDN'T HAPPEN
MOVE T1,S1 ;GET INDEX INTO DEVICE NAME TABLE
MOVEI S2,ACKU.X ;ASSUME NO LOGICAL NAME ASSIGNED
SKIPE .VSLNM(P4) ;HAVE A LOGICAL NAME?
MOVEI S2,ACKU.Y ;YES
TDZA TF,TF ;NO JUNK FOR DEVICE TYPE
>
TOPS20 <JRST ACKU.3 ;TOPS20 DOESN'T UNDERSTAND REAL DEVICES
>
; Here for MDA devices
ACKU.4: LOAD TF,.UCBST(P2),UC.DVT ;GET THE DEVICE TYPE
SKIPN S1,.VSTXT(P4) ;ANY ADDITIONAL TEXT ???
MOVEI S1,[0] ;NO,,GET A NULL
CAXN TF,%DISK ;IS THIS A STRUCTURE ???
MOVEI S2,ACKU.D ;YES,,GET TEXT ADDRESS
CAXN TF,%TAPE ;IS IT A TAPE REQUEST ???
PUSHJ P,[MOVEI S2,ACKU.T ;YES,,DEFAULT TO NO LOGICAL NAME
SKIPE .VSLNM(P4) ;UNLESS HE SPECIFIED ONE
MOVEI S2,ACKU.L ; THEN GET TEXT WITH LOGICAL NAME
POPJ P, ] ;RETURN
$TEXT (MDADBP,<^T/(S1)/^I/(S2)/>) ;TAKES ALOT TO BE PRETTY !!!
SKIPN S1,.VSTXT(P4) ;ANY ADDITIONAL TEXT ???
JRST ACKU.3 ;NO,,GET NEXT VSL
LOAD S2,S1,VS.ADR ;GET THE TEXT ADDRESS IN S2
LOAD S1,S1,VS.LEN ;GET THE TEXT LENGTH IN S1
PUSHJ P,M%RMEM ;RETURN IT TO THE FREE POOL
SETZM .VSTXT(P4) ;ZAP THE TEXT POINTER
JRST ACKU.3 ;GET NEXT VSL
ACKU.6: SETZM S1 ;GET A NULL BYTE
IDPB S1,MDBPTR ;MAKE THE ACK ASCIZ
PUSHJ P,USRNOT ;SEND THE MESSAGE OFF
ZERO .MRFLG(AP),MR.WAT ;CLEAR THE WAITING FOR ACK BIT
$RETT ;AND RETURN
ACKU.D: ITEXT (<[Structure ^W/.VLNAM(P1)/ mounted]>)
ACKU.T: ITEXT (<[Magtape ^W/.VLNAM(P1)/ mounted on ^W/.UCBNM(P2)/]>)
ACKU.L: ITEXT (<[Magtape ^W/.VLNAM(P1)/ mounted on ^W/.UCBNM(P2)/ with logical name ^W/.VSLNM(P4)/]>)
TOPS10 <
ACKU.X: ITEXT (<[^T/@DEVNTB(T1)/ ^W/.VLNAM(P1)/ mounted on ^W/MDAOBJ+OBJ.UN/]>)
ACKU.Y: ITEXT (<[^T/@DEVNTB(T1)/ ^W/.VLNAM(P1)/ mounted on ^W/MDAOBJ+OBJ.UN/ with logical name ^W/.VSLNM(P4)/]>)
>
SUBTTL TELOPR - ROUTINE TO NOTIFY THE OPERATOR TO MOUNT DEVICES
;CALL: S1/ The VSL Address of Any VSL to be Mounted
; AP/ The MDR Address
;
;RET: True Always
TOPS10<
TELOPR: PUSHJ P,.SAVE4 ;SAVE P1 - P4
PUSHJ P,.SAVET ;SAVE THE 'T' ACs ALSO
$SAVE <.FP> ;SAVE THE FRAME POINTER AC
TRVAR <<VOLID,2>,<RMK,15>,STRFLG> ;GEN A FLAG WORD FOR STRS
SETOM STRFLG ;AND SET IT
LOAD P1,.VSRID(S1),VS.LNK ;GET THE VSL LINK CODE
LOAD P2,.MRCNT(AP),MR.CNT ;GET THE USERS VOL SET REQUEST COUNT
MOVNS P2 ;NEGATE IT
MOVSS P2 ;MOVE RIGHT TO LEFT
HRRI P2,.MRVSL(AP) ;CREATE VSL AOBJN SEARCH AC
TELO.1: MOVE T1,0(P2) ;GET A VSL ADDRESS
LOAD S2,.VSRID(T1),VS.LNK ;GET ITS LINK CODE
CAME S2,P1 ;DO THEY MATCH ???
JRST TELO.2 ;NO,,GET NEXT
MOVE S2,.VSFLG(T1) ;GET THE VSL FLAG BITS
TXNN S2,VS.OPR+VS.VSW ;SWITCHING VOLS OR NOTIFY OPR ???
JRST TELO.2 ;NO,,SKIP THIS
LOAD P3,.VSCVL(T1),VS.OFF ;GET THE OFFSET TO THE CURRENT VOLUME
ADDI P3,.VSVOL(T1) ;POINT TO THE CURRENT VOLUME ADDRESS
MOVE P3,0(P3) ;POINT P3 AT THE CURRENT VOLUME
LOAD S2,.VLFLG(P3),VL.STA ;GET THE VOLUME STATUS
CAXN S2,%STAMN ;IS IT MOUNTED ???
JRST TELO.2 ;YES,,DON'T TELL OPR TO REMOUNT IT
PUSHJ P,CHKBAT ;CHECK TO SEE IF BATCH REQUEST
JUMPF TELO.2 ;YES,,DON'T TELL OPR
SETZM RMK ;NO REMARK HERE YET !!!
SKIPE .VSREM(T1) ;DID HE SPECIFY ANY ???
$TEXT (<-1,,RMK>,<^M^JRemark: ^T/.VSREM(T1)/^0>) ;YES,,GEN IT
ZERO .VSFLG(T1),VS.OPR ;CLEAR OPR BIT,,WE'RE TELLING OPR NOW
MOVE S2,G$NOW## ;GET THE CURRENT TIME
MOVEM S2,.VSSCH(T1) ;SAVE AS THE SCHEDULED TIME
LOAD S2,.VSFLG(T1),VS.TYP ;GET THE REQUEST TYPE
PUSHJ P,@TELTAB(S2) ;DISPATCH TO PROPER 'TELL' PROCESSOR
$RETIF ;RETURN IF FALSE
TELO.2: AOBJN P2,TELO.1 ;CONTINUE FOR ALL VSL'S
$RETT ;RETURN
TELTAB: TELUNK ;%UNKN - UNKNOWN DEVICE
TELMTA ;%TAPE - MAGTAPE
TELDSK ;%DISK - STRUCTURE
TELDTA ;%DTAP - DECTAPE
.POPJ ;%DSMT - DISMOUNT STRUCTURE (IGNORED)
.POPJ ;%STRC - STRUCTURE (IGNORED)
.POPJ ;%TVOL - MAGTAPE VOLUME (IGNORES)
.POPJ ;%DTVOL- DECTAPE VOLUME (IGNORED)
; Tell OPR about magtape request (%TAPE)
;
TELMTA: DMOVE T3,[ASCIZ/Scratch/] ;YES,,GET A SCRATCH VOLID
DMOVEM T3,VOLID ;DEFAULT TO THIS !!!
MOVX T3,VS.SCR+VS.NEW ;GET 'SCRATCH+NEW' STATUS BITS
MOVEI S2,NEWTXT ;ASSUME /NEW OR /SCRATCH
TDNE T3,.VSFLG(T1) ;IS THIS A SCRATCH OR NEW VOLUME SET ?
JRST TMTA.1 ;NOT SPECIFIED, EVERYTHING OK
$TEXT (<-1,,VOLID>,<^W/.VLNAM(P3)/^0>) ;NO,,GEN ASCIZ VOLID
MOVEI S2,NONEWT ;GET THE TEXT TO LABEL THE TAPES
TMTA.1: PUSHJ P,GETLBT ;GO SEE IF USER SPECIFIED LABELS
CAXN S1,%UNLBL ;DID HE?
MOVEI S2,NONEWT ;DON'T PROMPT FOR INITIALIZATION AT ALL
LOAD P4,.VSFLG(T1),VS.WLK ;GET THE WRITE-LOCKED CODE
LOAD T2,.VSFLG(T1),VS.LBT ;GET THE REQUESTED LABEL TYPE
LOAD T3,.VSATR(T1),VS.TRK ;GET THE TRACK STATUS
LOAD T4,.VSATR(T1),VS.DEN ;GET THE REQUESTED DENSITY
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE PROCESS JOB NUMBER
TXC S1,BA%JOB ;SWAP REQUEST STATES
TXNE S1,BA%JOB ;IS THIS A REAL REQUEST ???
$WTO (<Magtape mount request #^D/.VSRID(T1),VS.RID/>,<^I/DEMO/^T/RMK/^M^JVolume-set-name: ^T/.VSVSN(T1)/^T/MTAHDR/^T11/VOLID/^T9/@WRTENA(P4)/^T9/@LABELS(T2)/^W6/TRK(T3)/^T/@DENSTY(T4)/^I/(S2)/>,,<$WTFLG(WT.SJI)>)
TXNN S1,BA%JOB ;IS IT A PSEUDO PROCESS ???
$WTO (<Magtape mount request #^D/.VSRID(T1),VS.RID/>,<User: [SYSTEM] for ^15/.MRFLG(AP),MR.QUE/ Request #^D/S1/^T/RMK/^M^JVolume-set-name: ^T/.VSVSN(T1)/^T/MTAHDR/^T11/VOLID/^T9/@WRTENA(P4)/^T9/@LABELS(T2)/^W6/TRK(T3)/^T/@DENSTY(T4)/^I/(S2)/>,,<$WTFLG(WT.SJI)>)
$RETT ;RETURN
NEWTXT: ITEXT (<^M^JInitialize new tape with volume-id: ^W/.VLNAM(P3)/ protection: ^O3/.VSATR(T1),VS.PRT/^T/BELLS/>)
NONEWT: ITEXT (<^T/BELLS/>) ;IF /NEW OR /SCRA NOT SEEN
MTAHDR: ASCIZ/
Volume-ID Write Labels Track Density
--------- ------- ------ ----- -------
/
; Tell OPR about structure request (%DISK)
;
TELDSK: MOVE S1,.VLNAM(P3) ;GET THE STRUCTURE NAME
MOVEM S1,MDAOBJ+OBJ.UN ;SAVE IT IN THE MDA OBJECT BLOCK
PUSHJ P,D$FCAT ;FIND ITS CATALOG ENTRY
SKIPT ;IT MUST BE THERE !!!
PUSHJ P,S..SCE ;NO,,DEEEP TROUBLE !!!
MOVE T2,.CTCNT(S1) ;GET # OF VOLUMES WORD
MOVEI P3,.CTVOL(S1) ;POINT TO THE FIRST BLOCK !!!
MOVE S1,[POINT 7,G$MSG] ;SETUP A BYTE POINTER
MOVEM S1,MDBPTR ; FOR VOLUME BUFFER
SETZM T1 ;CLEAR LOGICAL UNIT NUMBER COUNTER
AOSG STRFLG ;MODIFY AND CHK THE STRUTCURE MOUNT FLAG
PUSHJ P,SETSEL ;FIRST TIME THROUGH,,SET UNIT SELECTED
MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%FIRST ;POSITION TO THE FIRST ENTRY
TELD.1: MOVE P4,.CTRSN(P3) ;GET THE RESOURCE NUMBER
TELD.2: MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT UCB ADDRESS
JUMPF .RETF ;NO MORE AVAILABLE,,JUST RETURN
LOAD S1,.UCBST(S2),UC.DVT ;GET THE DEVICE TYPE
CAXE S1,%DISK ;IS IT A STRUCTURE ???
JRST TELD.2 ;NO,,TRY NEXT UCB
LOAD S1,.UCBST(S2),UC.RSN ;GET THE DEVICE RESOURCE NUMBER
CAME S1,P4 ;DO THEY MATCH ???
JRST TELD.2 ;NO,,TRY NEXT
LOAD S1,.UCBST(S2),UC.SEL ;GET THE UNIT SELECTED BIT
JUMPN S1,TELD.2 ;IF LIT,,SKIP THIS UNIT !!!
MOVX S1,UC.SEL ;ELSE GET THE UNIT SELECTED BIT
IORM S1,.UCBST(S2) ; AND SET IT
IMULI P4,AMALEN ;GET 'A' MATRIX OFFSET
ADD P4,AMATRX ;GET THE 'A' MATRIX ENTRY ADDRESS
$TEXT(<-1,,TMPVSL>,<^W/MDAOBJ+OBJ.UN/^O/T1/^0>) ;GEN LOGICAL UNIT NAME
$TEXT(MDADBP,<^T8/TMPVSL/^W8/.CTVID(P3)/^T6/@.AMNAM(P4)/^W/.UCBNM(S2)/>)
ADDI P3,CATBLN ;BUMP TO THE NEXT CATALOG ENTRY
AOS T1 ;BUMP THE LOGICAL UNIT NUMBER
SOJG T2,TELD.1 ;CONTINUE FOR ALL VOLUME BLOCKS
SETZM S1 ;GET A NULL BYTE
IDPB S1,MDBPTR ;MAKE THE TEXT ASCIZ
MOVE T1,0(P2) ;PICK UP THE VSL ADDRESS AGAIN
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE PROCESS JOB NUMBER
TXC S1,BA%JOB ;SWAP REQUEST STATES
TXNE S1,BA%JOB ;IS THIS A REAL REQUEST ???
$WTO (<Structure mount request #^D/.VSRID(T1),VS.RID/^T/BELLS/>,<^I/DEMO/^T/RMK/^T/DSKHDR/^T/G$MSG/>,MDAOBJ)
TXNN S1,BA%JOB ;IS IT A PSEUDO PROCESS ???
$WTO (<Structure mount request #^D/.VSRID(T1),VS.RID/^T/BELLS/>,<User: [SYSTEM] for ^15/.MRFLG(AP),MR.QUE/ Request #^D/S1/^T/RMK/^T/DSKHDR/^T/G$MSG/>,MDAOBJ)
$RETT ;RETURN
DSKHDR: ASCIZ/
Unit Volume Type Drive
------ ------ ---- -----
/
; Tell OPR about DECtape request (%DTAP)
;
TELDTA: DMOVE T3,[ASCIZ/Scratch/] ;YES,,GET A SCRATCH VOLID
DMOVEM T3,VOLID ;DEFAULT TO THIS !!!
MOVX T3,VS.SCR+VS.NEW ;GET 'SCRATCH+NEW' STATUS BITS
TDNN T3,.VSFLG(T1) ;IS THIS A SCRATCH OR NEW VOLUME SET ???
$TEXT (<-1,,VOLID>,<^W/.VLNAM(P3)/^0>) ;NO,,GEN ASCIZ VOLID
LOAD P4,.VSFLG(T1),VS.WLK ;GET THE WRITE-LOCKED CODE
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE PROCESS JOB NUMBER
TXC S1,BA%JOB ;SWAP REQUEST STATES
TXNE S1,BA%JOB ;IS THIS A REAL REQUEST ???
$WTO (<DECtape mount request #^D/.VSRID(T1),VS.RID/>,<^I/DEMO/^T/RMK/^M^JVolume-set-name: ^T/.VSVSN(T1)/^T/DTAHDR/^T11/VOLID/^T9/@WRTENA(P4)/^T/BELLS/>,,<$WTFLG(WT.SJI)>)
TXNN S1,BA%JOB ;IS IT A PSEUDO PROCESS ???
$WTO (<DECtape mount request #^D/.VSRID(T1),VS.RID/>,<User: [SYSTEM] for ^15/.MRFLG(AP),MR.QUE/ Request #^D/S1/^T/RMK/^M^JVolume-set-name: ^T/.VSVSN(T1)/^T/DTAHDR/^T11/VOLID/^T9/@WRTENA(P4)/^T/BELLS/>,,<$WTFLG(WT.SJI)>)
$RETT ;RETURN
DTAHDR: ASCIZ/
Volume-ID Write
--------- -------
/
TELUNK: MOVE S1,T1 ;GET THE VSL ADDRESS
PUSHJ P,I$CGEN## ;GET THE DEVICE TYPE AND INDEX
MOVE P4,S1 ;SAVE THE DEVICE INDEX
HRROI S1,.VSVSN(T1) ;POINT TO THE VOLUME SET NAME
PUSHJ P,S%SIXB ;CONVERT TO SIXBIT
MOVEM S2,MDAOBJ+OBJ.UN ;SAVE IT IN THE OBJECT BLOCK
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE PROCESS JOB NUMBER
TXC S1,BA%JOB ;SWAP REQUEST STATES
TXNE S1,BA%JOB ;IS THIS A REAL REQUEST ???
$WTO (<Device mount request #^D/.VSRID(T1),VS.RID/^T/BELLS/>,<^I/DEMO/^T/RMK/^M^JDevice: ^T/@DEVNTB(P4)/>,MDAOBJ)
TXNN S1,BA%JOB ;IS IT A PSEUDO PROCESS ???
$WTO (<Device mount request #^D/.VSRID(T1),VS.RID/^T/BELLS/>,<User: [SYSTEM] for ^15/.MRFLG(AP),MR.QUE/ Request #^D/S1/^T/RMK/^M^JDevice: ^T/@DEVNTB(P4)/>,MDAOBJ)
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL MNTOPR - ROUTINE TO NOTIFY THE OPR OF PENDING MOUNT REQUESTS
;CALL: No Args
;
;RET: Nothing - Notifies the operator if mounts are pending
MNTOPR: SKIPN G$OPRA## ;OPERATOR ON DUTY?
JRST MNTO.9 ;NOPE - JUST RESCHEDULE THE EVENT
PUSHJ P,.SAVE4 ;SAVE P1 - P4
STKVAR <KOUNT> ;GET SPACE FOR A COUNT
SETZM KOUNT ;CLEAR MOUNT COUNTER
MOVE S1,VOLQUE ;GET THE VOLUME QUEUE ID
PUSHJ P,L%FIRST ;GET THE FIRST VOL IN THE QUEUE
JRST MNTO.2 ;JUMP THE FIRST TIME THROUGH
MNTO.1: MOVE S1,VOLQUE ;GET THE VOLUME QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT VOLUME IN THE QUEUE
MNTO.2: JUMPF MNTO.7 ;NO MORE,,GO FINISH UP...
MOVE P2,S2 ;SAVE THE VOL ENTRY ADDRESS
LOAD P4,.VLOWN(P2),VL.CNT ;GET THE VOLUME REQUEST COUNT..
JUMPE P4,MNTO.1 ;NO REQUESTORS,,SKIP IT..
MOVNS P4 ;NEGATE THE REQUEST COUNT
MOVSS P4 ;MOVE RIGHT TO LEFT
HRRI P4,.VLVSL(P2) ;CREATE VSL AOBJN AC
MOVE P3,.VLUCB(P2) ;GET THE UCB ADDRESS
MNTO.3: MOVE P1,0(P4) ;GET A VSL ADDRESS
MOVE AP,.VSMDR(P1) ;GET THE MDR ADDRESS
MOVE S1,.VSFLG(P1) ;GET THE VSL FLAG BITS
TXNN P1,VL.ASN ;DOES HE OWN THE VOLUME ???
TXNE S1,VS.ALC+VS.ABO ;JUST ALLOCATED OR ABORTED ???
JRST MNTO.6 ;YES,,TRY NEXT VSL
SKIPN S1,.MRQEA(AP) ;CHECK AND LOAD QE ADDRESS
JRST MNTO.4 ;NO QE, NO BATCH JOB TO CHECK
PUSHJ P,S$INPS## ;FOUND,,CHECK SCHEDULABILITY
JUMPF MNTO.6 ;NO GO,,SKIP IT
MOVE S1,.MRQEA(AP) ;GET THE QE AGAIN
MOVX S2,QE.HBO ;GET 'HELD BY OPERATOR BIT'
TDNE S2,.QESEQ(S1) ;IS IT?
JRST MNTO.6 ;HELD JOBS CAN'T MOUNT THINGS
MNTO.4: LOAD S1,.VSCVL(P1),VS.OFF ;GET THE OFFSET TO HIS CUR VOL
ADDI S1,.VSVOL(P1) ;POINT TO HIS CURRENT VOL ADDR
CAME P2,0(S1) ;IS THIS THE VOL HE NEEDS ???
JRST MNTO.6 ;NO,,SKIP THIS
LOAD S1,.VSFLG(P1),VS.TYP ;GET THE VOLUME SET TYPE
CAXE S1,%DISK ;IS THIS A STRUCTURE REQUEST ???
JRST MNTO.5 ;NO,,ADD UP THE TAPE REQUEST
LOAD S1,.VLFLG(P2),VL.STA ;GET THE VOLUME STATUS
CAXN S1,%STAMN ;IS THE STRUCTURE MOUNTED ???
JRST MNTO.6 ;YES,,SKIP THIS REQUEST
MNTO.5: AOS KOUNT ;BUMP THE MOUNT COUNTER
MNTO.6: AOBJN P4,MNTO.3 ;CONTINUE THROUGH ALL USERS
JRST MNTO.1 ;CONTINUE THROUGH ALL VOLUMES
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
MNTO.7: SKIPN P1,KOUNT ;ANY MOUNTS PENDING ???
JRST MNTO.9 ;NO,,JUST ADD THE EVENT BACK
MOVE S1,[ASCII/is/] ;DEFAULT TO 1 MOUNT
SETZM S2 ;GET A NULL
CAIG P1,1 ;MORE THEN 1 MOUNT ???
JRST MNTO.8 ;NO,,LETERRIP !!!
MOVE S1,[ASCII/are/] ;YES,,SET IT UP
MOVE S2,[ASCII/s/] ;TAKES A LOT TO BE NICE !!!
MNTO.8: $WTO (<There ^T/S1/ ^D/KOUNT/ mount request^T/S2/ pending^T/BELLS/>,,,<$WTFLG(WT.SJI)>)
MNTO.9: SETZM G$MSG+.EVTYP ;CLEAR THE EVENT TYPE WORD
MOVX S1,%EVAFT ;WANT TYPE 'AFTER'
STORE S1,G$MSG+.EVTYP,EV.TYP ;SET IT
MOVEI S1,3 ;GET 3 MINUTES
PUSHJ P,A$AFT## ;COMPUTE IT
MOVEM S1,G$MSG+.EVUDT ;SET IT
MOVEI S1,MNTOPR ;GET THIS ROUTINE ADDRESS
MOVEM S1,G$MSG+.EVRTN ;SET IT
MOVX S1,.EVMSZ ;GET THE EVENT BLOCK LENGTH
MOVEI S2,G$MSG ;AND ITS ADDRESS
PUSHJ P,S$EVENT## ;ADD TO THE EVENT LIST
$RETT ;AND RETURN
SUBTTL SETSEL - ROUTINE TO FIND THOSE UCB'S WHICH ARE FREE
;CALL: No Args
;
;RET: True Always
TOPS10<
SETSEL: PUSHJ P,.SAVE2 ;SAVE P1 AND P2
MOVX P1,UC.SEL ;GET THE UNIT SELECTED BIT
MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%FIRST ;POSITION TO THE FIRST ENTRY
JRST SETS.2 ;JUMP THE FIRST TIME THROUGH
SETS.1: MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT ENTRY
SETS.2: JUMPF .RETT ;DONE,,RETURN
MOVE P2,S2 ;SAVE THE UCB ADDRESS
ANDCAM P1,.UCBST(P2) ;CLEAR THE UNIT SELECTED STATUS BIT
LOAD S1,.UCBST(P2),UC.DVT ;GET THE UNIT TYPE
CAXN S1,%DISK ;IS IT A DISK UNIT ???
SKIPN S1,.UCBVL(P2) ;YES,,ANY VOLUME MOUNTED ???
JRST SETS.1 ;NOT A DISK OR NO VOL MOUNTED,,GET NEXT
SETS.3: LOAD S2,.VLPTR(S1),VL.PRV ;FIND THE PRIMARY VOL BLOCK
JUMPE S2,SETS.4 ;FOUND IT,,SEE IF ANYONE OWNS IT
MOVE S1,S2 ;ELSE SAVE THIS VOL BLOCK ADDRESS
JRST SETS.3 ;AND KEEP LOOKING
SETS.4: PUSHJ P,FNDOWN ;ANY OWNERS OF THE MOUNTED VOLUME ???
JUMPF SETS.1 ;NO,,GET NEXT UCB
IORM P1,.UCBST(P2) ;YES,,LITE UNIT SELECTED
JRST SETS.1 ;AND GO GET THE NEXT UCB
> ;END TOPS10 CONDITIONAL
SUBTTL USRNOT - SEND A MESSAGE TO THE USER
;CALL: AP/ The Users MDR Address
; G$MSG/ The Message to be sent
;
;RET: True Always
D$USRN:: ;MAKE IT GLOBAL
USRNOT: MOVE S1,.MRFLG(AP) ;GET MDR FLAGS
TXNE S1,MR.GFR ;IS THIS FROM [SYSTEM]GOPHER ???
JRST [ZERO .MRFLG(AP),MR.GFR ;YES,,CLEAR IT AND
$RETT ] ;RETURN (GOPHER DOESN'T WANT THIS ACK)
LOAD S2,.MRJOB(AP),MD.PJB ;GET THE USERS JOB NUMBER
TXNN S2,BA%JOB ;IS IT AN INTERNAL REQUEST ???
TXNN S1,MR.WAT!MR.NOT!MR.ACK ;OR WANT SOME STYLE NOTIFICATION ???
JRST [SETZM ERRACK ;PSEUDO REQ OR NO ACK,,ZAP ERROR
$RETT ] ;AND RETURN
USRN.0: PUSHJ P,.SAVE1 ;SAVE P1 FOR A SECOND
TXNN S1,MR.WAT!MR.ACK ;WAITING FOR AN ACK ???
JRST USRN.N ;NO,,MUST BE NOTIFY
TXZN S1,MR.ACK ;ACK REQUESTED ???
TXZ S1,MR.WAT ;NO,,CLEAR WAITING
MOVEM S1,.MRFLG(AP) ;SAVE THE NEW STATUS
$CALL M%GPAG ;GET A PAGE TO BUILD THE ACK IN
MOVE P1,S1 ;SAVE THE ADRS OF THE TEXT PAGE
MOVEM P1,G$SAB##+SAB.MS ;AIM THE GLOBAL SAB AT THE PAGE
MOVE S1,.MRPID(AP) ;GET USER'S PID
MOVEM S1,G$SAB##+SAB.PD ;SEND ACK TO USER
MOVX S1,.OMTXT ;MESSAGE TYPE
STORE S1,.MSTYP(P1),MS.TYP ;SAVE IN HEADER
MOVX S1,MF.FAT ;GET FATAL ACK BIT
SKIPE ERRACK ;IS THIS AN 'ERROR' ACK ???
MOVEM S1,.MSFLG(P1) ;YES,,SET THE BIT
MOVX S1,.OHDRS+ARG.DA+MSGLN## ;LENGTH OF THE MESSAGE
STORE S1,.MSTYP(P1),MS.CNT ;SAVE IN MESSAGE HEADER
MOVX S1,PAGSIZ ;GET THE PAGE SIZE
STORE S1,G$SAB##+SAB.LN ;SAVE IN SEND BLOCK
MOVE S1,.MRACK(AP) ;GET THE MESSAGE ACK CODE
MOVEM S1,.MSCOD(P1) ;SAVE IT IN THE MESSAGE
MOVX S1,1 ;ONE ARG BLOCK
STORE S1,.OARGC(P1) ;SAVE IN HEADER
MOVX S1,.CMTXT ;BLOCK TYPE-- TEXT
STORE S1,.OHDRS+ARG.HD(P1),AR.TYP ;SET BLOCK TYPE
MOVX S1,ARG.DA+MSGLN## ;SIZE OF THIS BLOCK
STORE S1,.OHDRS+ARG.HD(P1),AR.LEN ;LENGTH INTO BLOCK HEADER
MOVSI S1,G$MSG ;GET THE SOURCE ADDRESS
HRRI S1,.OHDRS+ARG.DA(P1) ;GET DESTINATION ADDRESS
BLT S1,.OHDRS+ARG.DA+MSGLN##-1(P1) ;COPY THE TEXT OVER
PUSHJ P,C$SEND## ;ACK THE USER
JUMPT [SETZM ERRACK ;CLEAR THE ERROR FLAG
$RETT ] ;AND RETURN
;HERE TO NOTIFY USER VIA ORION TYPING ON HIS TERMINAL
TOPS10 <
USRN.N: LOAD S1,.MRFLG(AP),MR.NOT ;WANT TO BE NOTIFIED?
JUMPE S1,[SETZM ERRACK ;NO,,CLEAR THE ERROR FLAG
$RETT ] ;AND RETURN
SKIPA ;ENTER THE COMMON STUFF
USRN.W: $SAVE <P1> ;SAVE A REG
MOVX S1,BA%JOB ;GET THE BATCH JOB BIT
TDNE S1,.MRJOB(AP) ;IS THIS REQUEST A BATCH REQUEST?
JRST USRN.6 ;YES, SKIP THE NOTIFICATION
$CALL M%GPAG ;GET A PAGE TO BUILD THE ACK IN
MOVE P1,S1 ;SAVE THE ADRS OF THE TEXT PAGE
MOVEM P1,G$SAB##+SAB.MS ;AIM THE GLOBAL SAB AT THE PAGE
MOVX S2,SI.FLG+SP.OPR ;SEND VIA INDEX TO OPR
STORE S2,G$SAB##+SAB.SI ;SAVE IN SAB
SETZM G$SAB##+SAB.PD ;BE TIDY.. NO PID
MOVX S1,.OHDRS+JBI.SZ+ARG.DA+MSGLN## ;SIZE OF THE MESSAGE
STORE S1,.MSTYP(P1),MS.CNT ;SAVE IN MESSAGE ITSELF
MOVX S1,PAGSIZ ;GET THE PAGE LENGTH
STORE S1,G$SAB##+SAB.LN ;SAVE IT IN THE SAB
MOVX S1,.OMNFY ;MESSAGE TYPE -- NOTIFY
STORE S1,.MSTYP(P1),MS.TYP ;SAVE IN HEADER
MOVX S1,2 ;TWO BLOCKS
STORE S1,.OARGC(P1) ;SAVE IN HEADER
MOVE S1,[XWD JBI.SZ,.JOBID] ;LEN,,SIZE OF JOB INFO BLOCK
MOVEM S1,.OHDRS+ARG.HD(P1) ; SAVE IN FIRST BLOCK
MOVE S1,.MRLOG(AP) ;GET JOB'S UNIV. LOGIN TIME
MOVEM S1,.OHDRS+JBI.LI(P1) ;SAVE AS DATA FOR THIS BLOCK
LOAD S1,.MRJOB(AP),MD.PJB ;GET JOB NUMBER
STORE S1,.OHDRS+JBI.JB(P1) ;SAVE AS MORE DATA IN JOB INFO BLOCK
MOVEI P1,.OHDRS+JBI.SZ(P1) ;POINT TO THE LAST BLOCK
MOVX S1,.CMTXT ;BLOCK TYPE-- TEXT
STORE S1,ARG.HD(P1),AR.TYP ;SET BLOCK TYPE
MOVX S1,ARG.DA+MSGLN## ;SIZE OF THIS BLOCK
STORE S1,ARG.HD(P1),AR.LEN ;LENGTH INTO BLOCK HEADER
MOVE S1,[BYTE(7) 15,12,0,0,0] ;GET A CRLF
SKIPE ERRACK ;UNLESS THIS IS AN ERROR ACK !!
MOVE S1,[BYTE(7) 15,12,77,0,0] ; THEN GET A <CRLF>?
MOVX S2,MR.DMO ;GET DISMOUNT STR BIT
TDNE S2,.MRFLG(AP) ;IS THAT WHAT WE'RE DOING?
SKIPA S2,[ASCIZ | |] ;YES
MOVE S2,[BYTE (7) 15,12,0] ;ELSE USE A CRLF
$TEXT (<-1,,ARG.DA(P1)>,<^T/S1/From system:^T/S2/^T/G$MSG/^T/BELLS/>)
PUSHJ P,C$SEND## ;ACK THE USER
USRN.6: SETZM ERRACK ;CLEAR THE ERROR FLAG
$RETT ;AND RETURN
>
TOPS20 <
USRN.N: $RETT > ;JUST RETURN ON THE -20
SUBTTL NSTUSR - Notify users of pending structure locks
;this routine will notify all the users of a given structure that a
; LOCk has been given by the operator for a structure they own,
; and will not be available for long
;Call -
; S1/ Prime volume block address
; S2/ Addrs of ITEXT for message (ITEXT should stay in P acs)
;Returns -
; TRUE, messages sent to all requestors
TOPS10<
NSTUSR: $TEXT (<-1,,G$MSG>,<^I/0(S2)/^M^J^0>) ;DUMP THE TEXT OF THE MESSAGE
$SAVE <P1,AP> ;SAVE P1 AND AP
MOVE P1,S1 ;COPY ADRS OF PRIMARY VOL BLOCK
LOAD S1,.VLOWN(P1),VL.CNT ;FIND OUT HOW MANY REQUESTORS
JUMPE S1,.RETT ;NONE, NOTHING TO DO!
MOVNS S1 ;GET NEGATIVE # OF REQUESTORS
HRL P1,S1 ;MAKE LOOP POINTER
SETZM ERRACK ;DO THE NORMAL STUFF IN USRNOT
NSTU.1: HRRZ S1,.VLVSL(P1) ;GET THE NEXT VSL ENTRY
SKIPN S1 ;BETTER BE ONE!!
$STOP (VSA,VSL Address is Missing in a VOL) ;NONE THERE,,END IT
SKIPN AP,.VSMDR(S1) ;GOT IT, GET BACK TO THE MDR
$STOP (IMV,Invalid MDR/VSL Forward/Backchain Pointers)
PUSHJ P,USRN.W ;WRITE ON THE REQUESTORS TERMINAL
AOBJN P1,NSTU.1 ;CHECK ALL REQUESTORS
$RETT ;DONE
> ;END TOPS10 CONDITIONAL
SUBTTL LBLNOT - ROUTINE TO NOTIFY LABEL PROCESS OF DEVICE REASSIGNMENT
TOPS10< ;CALL: S1/ The volume set list adrs, which points back to
; the MDR, and whose current offset points to the VOL just
; mounted, and which points to the UCB.
LBLNOT: $SAVE <P1,P2,P3>
MOVE P1,S1 ;SAVE THE VSL ADDR
MOVX S1,.QOVMN ;MESSAGE TYPE - VOLUME MOUNTED
PUSHJ P,LBLHDR ;SET THE HEADER FOR MESSAGE, SAB, ETC
MOVEI P2,G$MSG+.OHDRS ;AIM AT FIRST BLOCK
;Build the First Block, Which Describes the Device Reassigned
AOS G$MSG+.OARGC ;ONE MORE BLOCK
MOVX S1,.RECDV ;FIRST BLOCK TYPE - RECOGNIZE DEVICE
STORE S1,ARG.HD(P2),AR.TYP ;SET THIS BLOCK TYPE
MOVX S1,.RECSZ+ARG.DA ;GET LENGTH OF THIS BLOCK
STORE S1,ARG.HD(P2),AR.LEN ;SAVE IN BLOCK
ADDM S1,G$SAB+SAB.LN ;UPDATE SEND LENGTH
MOVSS S1 ;GET TO LH
ADDM S1,G$MSG+.MSTYP ;UPDATE TOTAL MESSAGE LENGTH
LOAD S1,.VSCVL(P1),VS.OFF ;GET OFFSET TO CURRENT VOLUME
ADDI S1,.VSVOL(P1) ;POINT TO THIS VOLUME'S ENTRY
MOVE P3,0(S1) ;NOW GET THE VOLUME ADDRS
MOVE S2,.VLUCB(P3) ;AND GET TO UCB ADDR
MOVE S1,.UCBNM(S2) ;GET THE DEVICE NAME
MOVEM S1,.RECDN+ARG.DA(P2) ;SAVE IN MESSAGE
MOVEI P2,.RECSZ+ARG.DA(P2) ;ADVANCE TO NEXT BLOCK
;Build the Second Block, Which Describes the Volume Set and User to
; Which the Drive was Given.
AOS G$MSG+.OARGC ;ONE MORE BLOCK
MOVX S1,.VOLMN ;GET THE NEXT BLOCK TYPE
STORE S1,ARG.HD(P2),AR.TYP ;SAVE AS BLOCK TYPE
MOVX S1,.VMNSZ+ARG.DA ;GET THE LENGTH OF THE BLOCK
STORE S1,ARG.HD(P2),AR.LEN ;AND SAVE IN BLOCK HEADER
ADDM S1,G$SAB+SAB.LN ;UPDATE SEND LENGTH
MOVSS S1 ;GET TO LH
ADDM S1,G$MSG+.MSTYP ;UPDATE TOTAL MESSAGE LENGTH
MOVEI P2,ARG.DA(P2) ;AIM AT THE DATA PORTION OF THE BLOCK
LOAD S1,.VLNAM(P3) ;GET THE VOLUME NAME
STORE S1,.VMNIV(P2) ;SAVE AS INITIAL VOLUME NAME
MOVEI S1,.VSVOL(P1) ;AIM AT THE FIRST VOLUME BLOCK ADR
MOVE S1,(S1) ;GET THE ADR OF THE FIRST VOL BLOCK
LOAD S1,.VLNAM(S1) ;GET THE NAME OF THE FIRST VOLUME
STORE S1,.VMNFV(P2) ;SAVE IN MESSAGE TO LABELLER
SETZM .VMNIN(P2) ;CLEAN OUT THE GARBAGE
LOAD S1,.VSFLG(P1),VS.LBT ;GET THE LABEL TYPE
STORE S1,.VMNIN(P2),VI.LTY ;SAVE IN MESSAGE
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
LOAD S1,.VSFLG(P1),VS.WLK ;GET THE WRITE LOCK BIT
STORE S1,.VMNIN(P2),VI.WLK ;SAVE IN INFO WORD OF MESSAGE
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE JOB NUMBER
STORE S1,.VMNIN(P2),VI.JOB ;TELL THE LABELLER WHO'S THERE
PUSHJ P,C$SEND## ;TELL THE LABELLER
$RETT
>;END TOPS10
SUBTTL LBLHDR - Set up for a message to MDA
;Thie routine will set up G$SAB for a message to MDA which
; will be in G$MSG
;Call -
; S1/ Message type
TOPS10<
LBLHDR: STORE S1,G$MSG+.MSTYP,MS.TYP ;SAVE THE MESSAGE TYPE
MOVX S1,.OHDRS ;SIZE OF HEADER ALONE
STORE S1,G$MSG+.MSTYP,MS.CNT ;LENGTH SO FAR
MOVEM S1,G$SAB##+SAB.LN ;LENGTH TO SEND
SETZM G$SAB##+SAB.PD ;NO PID...
MOVX S1,<SI.FLG+SP.TLP> ;.. SEND BY SPECIAL INDEX
MOVEM S1,G$SAB##+SAB.SI ;MARK IN SAB
SETZM G$SAB##+SAB.PB ;SEND ON MY BEHALF
SETZM G$MSG+.MSFLG ;NO MESSAGE FLAGS
SETZM G$MSG+.MSCOD ;NO ACK CODE
SETZM G$MSG+.OFLAG ;AND NO FLAGS (YET)
SETZM G$MSG+.OARGC ;NO ARG BLOCKS (YET)
MOVEI S1,G$MSG ;THE ADR OF THE MESSAGE
MOVEM S1,G$SAB##+SAB.MS ;AIM THE SAB AT US
$RETT ;ALL SET UP
>;END TOPS10
SUBTTL SNDREC - ROUTINE TO SEND A RECOGNIZE MSG TO THE TAPE LABELER
;CALL: S1/ The Device Name in Sixbit
;
;RET: True Always
TOPS10 <
RECMSG: $BUILD .OHDRS+ARG.DA+1
$SET(.MSTYP,MS.TYP,.QOREC) ;TYPE 'RECOGNIZE MESSAGE'
$SET(.MSTYP,MS.CNT,.OHDRS+ARG.DA+1) ;MESSAGE LENGTH
$SET(.OARGC,,1) ;A BLOCK COUNT OF 1
$SET(.OHDRS+ARG.HD,AR.LEN,2) ;THE BLOCK LENGTH
$SET(.OHDRS+ARG.HD,AR.TYP,.RECDV) ;THE BLOCK TYPE
$EOB
D$SREC:: ;MAKE IT GLOBAL
SNDREC: SKIPN S1 ;*** MUST BE NON-ZERO ***
$STOP (QBI,<QUASAR blew it>) ;++ WE'RE IN TROUBLE NOW
MOVEM S1,RECMSG+.OHDRS+ARG.DA ;SAVE THE DEVICE NAME IN THE MESSAGE
MOVEI S1,.OHDRS+ARG.DA+1 ;GET THE MESSAGE LENGTH
MOVEM S1,G$SAB##+SAB.LN ;SAVE IT IN THE SAB
MOVEI S1,RECMSG ;GET THE MESSAGE ADDRESS
MOVEM S1,G$SAB##+SAB.MS ;SAVE IT IN THE SAB
SNDLBR: MOVX S1,SI.FLG+SP.TLP ;GET THE SPECIAL INDEX FOR TAPE LABELER
MOVEM S1,G$SAB##+SAB.SI ;SAVE IT IN THE SAB
SETZM G$SAB##+SAB.PD ;ZAP THE SAB PID WORD
PUSHJ P,C$SEND## ;SEND THE MESSAGE OFF
$RETT ;AND RETURN
SUBTTL UNLOAD - TELL PULSAR TO UNLOAD THE TAPE DRIVE
;CALL: S1/ The Device Name in Sixbit
;
;RET: True Always
REWIND: SKIPA S2,[.QOREW] ;REWIND ENTRY POINT,,GET REWIND MSG TYPE
UNLOAD: MOVX S2,.QOUNL ;UNLOAD ENTRY POINT,,GET UNLOAD MSG TYPE
LBLCOM: STORE S2,RECMSG+.MSTYP,MS.TYP ;MAKE THE RECOGNIZE MSG AN UNLOAD MSG
PUSHJ P,SNDREC ;SEND THE UNLOAD MSG OFF TO PULSAR
MOVX S2,.QOREC ;GET 'RECOGNIZE' MSG TYPE
STORE S2,RECMSG+.MSTYP,MS.TYP ;RESTORE THE RECOGNIZE MSG TYPE
$RETT ;AND RETURN
;STILL IN TOPS10
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVOIUS PAGE
;STILL IN TOPS10
SUBTTL SNDVDM - Send volume dismount message to tape labeler
;Call -
; S1/ UCB adrs of drive just deassigned
;Returns -
; message to tape labeler informing of drive no longer in use
SNDVDM: LOAD S1,.UCBNM(S1) ;GET DRIVE NAME
MOVX S2,.QOVDM ;MESSAGE TYPE - VOLUME DISMOUNTED
PJRST LBLCOM ;GO SEND MESSAGE TO LABELER
>;END TOPS10
SUBTTL FNDUCB - ROUTINE TO FIND A UCB IN THE UCB CHAIN
;CALL: FNDUCB - S1/ The Address of the message asciz device name
; UCBFND - S1/ The sixbit device name
; LOCxxx Get UCB regardless of un/available bit
; FNDxxx Only return UCB if drive is available
;
;RET: True - S1/ The UCB Address, S2/ sixbit device name checked/
; False - The UCB Was Not Found or the Device Name was Invalid,
; Or the 'Device Available' bit was not on in the UCB
TOPS10 <
LOCUCB: TDZA TF,TF ;SET FLAG FOR LOCATE UCB ENTRY POINT
FNDUCB: SETOM TF ;SET FLAG FOR FIND UCB ENTRY POINT
$SAVE <P1,P2> ;SAVE P1 AND P2
MOVE P1,TF ;SAVE THE ENTRY POINT FLAGS IN P1
HRROI S1,0(S1) ;GET A BYTE POINTER TO THE DEVICE NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
JRST GETU.1 ;CONTINUE TO SEARCH UCB CHAIN
UCBLOC: TDZA TF,TF ;SET FLAG FOR LOCATE UCB ENTRY POINT
D$GUCB:: ;GLOBAL ENTRY POINT
UCBFND: SETOM TF ;SET FLAG FOR FIND UCB ENTRY POINT
$SAVE <P1,P2> ;SAVE P1 AND P2
MOVE P1,TF ;SAVE THE ENTRY POINT FLAGS IN T1
MOVE S2,S1 ;GET THE DEVICE NAME IN S2
GETU.1: MOVEM S2,MDAOBJ+OBJ.UN ;SAVE THE DEVICE NAME IN THE OBJ BLOCK
DEVNAM S2, ;GET THE REAL DEVICE NAME
SKIPA S2,MDAOBJ+OBJ.UN ;CAN'T - USE WHAT WE HAVE
MOVEM S2,MDAOBJ+OBJ.UN ;SAVE THE DEVICE NAME IN THE OBJ BLOCK
MOVE P2,S2 ;SAVE THE DEVICE NAME IN P2 ALSO
MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%FIRST ;POSITION TO THE FIRST ENTRY
JUMPF E$NSD## ;NOT THERE,,RETURN NOW
FNDU.1: CAME P2,.UCBAU(S2) ;IS THIS THE UCB WE WANT ???
CAMN P2,.UCBNM(S2) ; OR DO WE MATCH HERE ???
JRST FNDU.2 ;FOUND,,SEE IF WE OWN IT !!!
MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT UCB ENTRY
JUMPT FNDU.1 ;THERE IS ONE,,TRY IT OUT
PJRST E$NSD## ;RETURN THROUGH 'NO SUCH DEVICE'
FNDU.2: MOVE S1,S2 ;PLACE UCB ADDR IN RETURN REG
EXCH S2,P2 ;SWAP SIXBIT DEVICE NAME WITH UCB ADDR
JUMPE P1,.RETT ;OK IF DEVICE IS AVAILABLE,,RETURN
LOAD P2,.UCBST(P2),UC.AVA ;GET THE DEVICE AVAILABLE BIT
JUMPN P2,.RETT ;WE OWN THE DEVICE,,SO RETURN
$ERJMP MD$IUD ;RETURN ERROR
>
SUBTTL GETRSN - ROUTINE TO RETURN THE FIRST AVAILABLE RESOURCE NUMBER
;CALL: No Args
;
;RET: S1/ The Next Resource Number
TOPS10<
GETRSN: MOVE S1,AMATRX ;GET THE 'A' MATRIX ADDRESS
LOAD S2,.AMHDR(S1),AM.MCN ;GET THE NUMBER OF SLOTS IN BLOCK
JUMPE S2,GETR.2 ;NULL COUNT,,SHOULD NOT HAPPEN
MOVNS S2 ;NEGATE IT
HRLZS S2 ;TO LH
ADDI S2,1 ;1 IN RH
GETR.1: ADDI S1,AMALEN ;GET NEXT MATRIX ENTRY
SKIPGE .AMNAM(S1) ;IS THIS RESOURCE ALLOCATED ???
AOBJN S2,GETR.1 ;YES, TRY THE NEXT ONE
JUMPGE S2,GETR.2 ;NO FREE BLOCKS
HRRZ S1,S2 ;EXTRACT WINNING INDEX
MOVE S2,AMATRX ;AIM AT CURRENT BASE
LOAD TF,.AMHDR(S2),AM.CNT ;GET HIGHEST SLOT IN USE
CAIGE TF,0(S1) ;IS THIS A NEW HIGH?
STORE S1,.AMHDR(S2),AM.CNT ;YES, SAVE THE NEW HIGH WATER MARK
$RETT ;GIVE THE CALLER THE INDEX
;Here if we have to expand the 'A' matrix
GETR.2: MOVE S1,AMATRX ;GET THE 'A' MATRIX ADDRESS
INCR .AMHDR(S1),AM.CNT ;BUMP THE HIGH WATER MARK
INCR .AMHDR(S1),AM.MCN ;AND THERE WILL BE SPACE FOR 1 MORE, TOO
PUSH P,AMATRX ;SAVE THE OLD 'A' MATRIX FOR LATER
LOAD S1,.AMHDR(S1),AM.LEN ;GET THE CURRENT MATRIX LENGTH
ADDI S1,AMALEN ;ADD 1 MORE ENTRY
PUSHJ P,M%GMEM ;GET SOME CORE FOR NEW 'A' MATRIX
EXCH S2,AMATRX ;SWAP OLD AND NEW 'A' MATRIX ADDRESSES
MOVSS S2 ;GET OLD,,0
HRR S2,AMATRX ;GET OLD,,NEW ADDRESSES
ADDI S1,-AMALEN(S2) ;GET NEW MATRIX END ADDRESS
BLT S2,-1(S1) ;COPY OLD MATRIX TO NEW MATRIX
MOVE S2,AMATRX ;GET THE NEW 'A' MATRIX ADDRESS
LOAD S1,.AMHDR(S2),AM.LEN ;GET THE OLD MATRIX LENGTH
ADDI S1,AMALEN ;ADD ANOTHER ENTRY LENGTH
STORE S1,.AMHDR(S2),AM.LEN ;AND SAVE THE NEW 'A' MATRIX LENGTH
POP P,S2 ;GET THE OLD 'A' MATRIX ADDRESS BACK
LOAD S1,.AMHDR(S2),AM.LEN ;GET THE OLD 'A' MATRIX LENGTH BACK
PUSHJ P,M%RMEM ;RETURN THE MEMORY
MOVE S1,AMATRX ;GET THE 'A' MATRIX ADDRESS
LOAD S1,.AMHDR(S1),AM.CNT ;RETURN THE LAST MATRIX ENTRY AS A RSN
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL GIVRSN - Return a slot of the A matrix
;This routine marks a slot of the A matrix as free
;This routine also keeps track of AM.CNT, the highest
; slot in use in the A matrix.
;
;CALL: S1/ Resource number
;
;RET: True Always
TOPS10<
GIVRSN: JUMPE S1,.RETT ;IF NO RSN, JUST RETURN
MOVE S2,S1 ;GET THE RSN IN S2
IMULI S2,AMALEN ;GET THE OFFSET TO THE 'A' MATRIX ENTRY
ADD S2,AMATRX ;GET THE 'A' MATRIX ENTRY ADDRESS
LOAD S2,.AMCNT(S2),AM.ALO ;GET THE ALLOCATION COUNT
JUMPN S2,.RETT ;NOT ZERO,,DON'T DELETE THE ENTRY
MOVE S2,AMATRX ;GET THE BASE OF THE MATRIX
LOAD TF,.AMHDR(S2),AM.CNT ;GET CURRENT HIGHEST SLOT #
CAIE TF,0(S1) ;RETURNING THE HIGHEST SLOT IN USE?
JRST GIVR.3 ;NO, KEEP GOING
PUSH P,S1 ;SAVE RSN BEING RETURNED
IMULI S1,AMALEN ;INDEX INTO THE TABLE
ADDI S1,0(S2) ;AIM AT THIS SLOT
GIVR.1: SUBI S1,AMALEN ;BACK OFF TO NEXT LOWER SLOT
SOJLE TF,GIVR.2 ;ANY SLOTS LEFT?
SKIPL .AMNAM(S1) ;IS THIS SLOT FREE?
JRST GIVR.1 ;YES, TRY THE NEXT
GIVR.2: STORE TF,.AMHDR(S2),AM.CNT ;SAVE PRESENT HIGH WATER MARK
POP P,S1 ;GET BACK RETURNED RSN
GIVR.3: IMULI S1,AMALEN ;INDEX INTO THE BLOCK
ADD S1,AMATRX ;AIM AT THE ENTRY
MOVE S2,.AMNAM(S1) ;GET THE NAME, AND PERMANENT BIT
SETZM .AMNAM(S1) ;CLEAR IT ALL OUT
TXNE S2,AM.PRM ;IS NAME IN PERMANENT A MATRIX?
$RETT ;YES, LEAVE IT THERE
LOAD S2,S2,AM.NAM ;GET JUST THE STRING ADRS
MOVEI S1,AMNMLN ;LENGTH OF THE BLOCK
$CALL M%RMEM ;GIVE BACK THE STORAGE
$RETT
> ;END TOPS10 CONDITIONAL
SUBTTL FNTAPE - ROUTINE TO FIND A TAPE VOLUME IN THE VOL DATA BASE
; FNDISK - "" "" "" DISK "" "" "" "" "" ""
;CALL: S1/ The Volume We are Looking For
;
;FNDISK RET: S1/ The Volume block Address
;
;FNTAPE RET: S1/ The Volume block Address
; S2/ The UCB Address if The Volume is Mounted or 0
D$FNDV:: ;MAKE 'FNDISK' GLOBAL
FNDISK: SKIPA S2,[%DISK] ;WANT TO FIND STRUCTURE VOLUMES
FNTAPE: MOVX S2,%TAPE ;WANT TO FIND TAPE VOLUMES
SETZM TF ;WANT TO WTO THE OPERATOR
JRST CHKV.0 ;CONTINUE ON
FNTAPX: MOVX S2,%TAPE ;WANT A TAPE VOL
SETOM TF ; BUT NO WTO IF MOUNTED
CHKV.0: PUSHJ P,.SAVE3 ;SAVE P1 - P3 FOR A MINUTE
MOVE P1,S1 ;SAVE THE VOL WE ARE LOOKING FOR
MOVE P2,S2 ;SAVE THE ENTRY POINT INDICATOR
MOVE P3,TF ;SAVE THE WTO FLAG
;See if we can find the mounted volume in our requested volume list.
MOVE S1,VOLQUE ;GET THE VOLUME QUEUE ID
PUSHJ P,L%FIRST ;POSITION TO THE FIRST ENTRY
JRST CHKV.2 ;SKIP THE FIRST TIME THROUGH
CHKV.1: MOVE S1,VOLQUE ;GET THE VOLUME QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT VOL ENTRY
CHKV.2: JUMPF .RETF ;MSG VOLUME NOT FOUND,,RETURN
MOVE S1,S2 ;GET THE VOLUME ADDRESS IN S1
CAME P1,.VLNAM(S1) ;HAVE WE FOUND THE MSG VOLUME ???
JRST CHKV.1 ;NO,,TRY THE NEXT VOL ENTRY
SKIPE S2,.VLVSL(S1) ;GET A VSL ADDRESS
LOAD S2,.VSFLG(S2),VS.TYP ;GET THE VOLUME TYPE
JUMPE S2,[MOVE S2,.VLUCB(S1) ;NO VSL ADDRESS,,GET UCB ADDRESS
LOAD S2,.UCBST(S2),UC.DVT ;GET THE VOLUME TYPE
JRST CHKV.3 ] ;AND CONTINUE
CHKV.3: CAME S2,P2 ;DO WE HAVE THE CORRECT VOLUME TYPE ???
JRST CHKV.1 ;NO,,TRY NEXT
CAXE P2,%TAPE ;LOOKING FOR TAPE VOLUMES ???
$RETT ;NO,,RETURN
JUMPN P3,.RETT ;NO WTO,,RETURN
;Found the Tape Volume in Our VOL Data Base,,Make Sure its not Mounted
SKIPE S2,.VLUCB(S1) ;FOUND IT,,IS THE VOL ALREADY MOUNTED ?
$WTO (<Volume ^W/.VLNAM(S1)/ already mounted on ^W/.UCBNM(S2)/>,,MDAOBJ)
$RETT ;AND RETURN TRUE (FOUND)
SUBTTL FNDOWN - FIND ANY OWNER OF A VOLUME
;CALL: S1/ The VOL Block Address
;
;RET: S1/ The Address of The VSL Address of The First Owner
;
; False if the Volume is not owned
D$VOWN::
FNDOWN: LOAD TF,.VLOWN(S1),VL.CNT ;GET THE VOLUME REQUEST COUNT
JUMPE TF,.RETF ;NO REQUESTORS,,NO OWNERS...
MOVNS TF ;NEGATE IT
HRL S1,TF ;GET NEGATIVE COUNT IN LEFT HALF
MOVX TF,VL.ASN+VL.ASK ;GET THE VOLUME ASSIGNED+ASK BITS
FNDO.1: TDNE TF,.VLVSL(S1) ;DOES THIS USER OWN THE VOLUME ???
JRST [MOVEI S1,.VLVSL(S1) ;YES,,GET THE ADDRESS OF THE VSL ADDRESS
$RETT ] ;AND RETURN IT
AOBJN S1,FNDO.1 ;NO,,TRY NEXT
$RETF ;AND RETURN
SUBTTL FNDMDR - ROUTINE TO FIND AN MDR GIVEN ITS JOB NUMBER
;CALL: FNDMDR: S1/ The Users Job #
;
;RET: AP/ The MDR Address If Found
; False if the MDR Can't be Found
D$FMDR::
FNDMDR: PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
MOVE P1,S1 ;SAVE THE JOB NUMBER
MOVE S1,MDRQUE ;GET THE MDR QUEUE ID
PUSHJ P,L%FIRST ;GET THE FIRST MDR ENTRY
JRST FNDM.2 ;JUMP THE FIRST TIME THROUGH
FNDM.1: MOVE S1,MDRQUE ;GET THE MDR QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT MDR ENTRY
FNDM.2: JUMPF .RETF ;MDR NOT FOUND !!!
LOAD S1,.MRJOB(S2),MD.PJB ;LOAD THE MDR JOB NUMBER
CAIE S1,0(P1) ;DO THEY MATCH ???
JRST FNDM.1 ;NO,,TRY THE NEXT MDR
MOVE AP,S2 ;YES,,GET THE MDR ADDRESS IN AP
$RETT ;RETURN
SUBTTL D$CCAT - Compare catalogue entries
; Call: MOVE S1, old entry address
; MOVE S2, new entry address
; PUSHJ P,D$CCAT
;
; TRUE return: match, duplicate (new) entry deleted, or old entry
; updated to reflect changed parameters if possible.
;
; FALSE return: mismatch, attempt to update the old entry failed.
; to purge the old entry will be made
;
; Note: On either return, the operator will be notified of a
; catalogue update or failure to do so. S1 will always
; contain the entry address to use.
;
TOPS10 < ;TOPS-10 ONLY
D$CCAT::$SAVE <P1,P2,P3,P4> ;SAVE SOME ACS
DMOVE P1,S1 ;COPY ARGUMENTS
DMOVE P3,P1 ;THIS WAY WE'LL NEVER FORGET!
MOVE S1,.CTVSN(P1) ;GET OLD VSN
MOVE S2,.CTOID(P1) ;GET OLD OWNER
CAMN S1,.CTVSN(P2) ;SAME AS NEW VSN?
CAME S2,.CTOID(P2) ;SAVE AS NEW OWNER?
JRST CCAT.2 ;NO
MOVE TF,.CTCNT(P1) ;GET OLD VOLUME COUNT
CAME TF,.CTCNT(P2) ;SAVE AS NEW VOLUME COUNT?
JRST CCAT.2 ;NO
MOVEI P1,CATLEN(P1) ;POINT TO START OF VOLUME BLOCKS
MOVEI P2,CATLEN(P2) ;HERE TOO
CCAT.1: MOVE S1,.CTVID(P1) ;GET AN OLD UNIT ID
MOVE S2,.CTRSN(P1) ;GET AN OLD RESOURCE NUMBER
CAMN S1,.CTVID(P2) ;SAME AS NEW UNIT ID?
CAME S2,.CTRSN(P2) ;SAVE AS NEW RESOURCE NUMBER?
JRST CCAT.2 ;NO
ADDI P1,CATBLN ;POINT TO NEXT ENTRY
ADDI P2,CATBLN ;HERE TOO
SOJG TF,CCAT.1 ;LOOP
MOVE S1,P4 ;GET DUPLICATE (NEW) ENTRY ADDRESS
PUSHJ P,CCAT.Z ;DELETE IT
MOVE S1,P3 ;GET ENTRY ADDRESS TO USE
$RETT ;AND RETURN
CCAT.2: PUSHJ P,CCAT.T ;SET UP TEXT AND WTO STUFF
$TEXT (CATTYO,<Old ^A>) ;INTRO
MOVE S1,P3 ;GET OLD ADDRESS
PUSHJ P,D$TCAT ;TYPE ENTRY
$TEXT (CATTYO,<New ^A>) ;INTRO
MOVE S1,P4 ;GET NEW ADDRESS
PUSHJ P,D$TCAT ;TYPE ENTRY
MOVE S1,.CTVSN(P4) ;GET NEW VSN
PUSHJ P,D$UCAT ;FIND ALL USERS OF THIS ENTRY
SKIPE P1,S1 ;GET # ALLOCATED
JRST CCAT.3 ;THERE AREN'T ANY
JUMPE P1,CCAT.3 ;ARE THERE ANY?
MOVEI S1,[ASCIZ |user|] ;ASSUME ONLY ONE
CAIE P1,1 ;IS IT?
MOVEI S1,[ASCIZ |users|] ;MAKE IT PLURAL
$TEXT (CATTYO,<^W/.CTVSN(P4)/ is allocated by ^D/P1/ ^T/(S1)/>)
$WTO (<Internal catalogue entry conflict>,<^T/CATTXT/>,CATOBJ,<$WTFLG(WT.SJI)>)
MOVE S1,P4 ;GET DUPLICATE (NEW) ENTRY ADDRESS
PUSHJ P,CCAT.Z ;DELETE IT
MOVE S1,P3 ;GET ENTRY TO USE
$RETF ;AND RETURN
CCAT.3: $TEXT (CATTYO,<Deleting old entry^0>)
$WTO (<Internal catalogue entry conflict>,<^T/CATTXT/>,CATOBJ,<$WTFLG(WT.SJI)>)
MOVE S1,P3 ;GET OLD ENTRY ADDRESS
PUSHJ P,CCAT.Z ;DELETE IT
MOVE S1,P4 ;GET ENTRY TO USE
$RETT ;AND RETURN
; Set up text buffer
;
CCAT.T: MOVEI S1,.OTMNT ;GET OBJECT TYPE MOUNT
MOVEM S1,CATOBJ+OBJ.TY ;SAVE IT
MOVE S1,.CTVSN(P3) ;GET VSN
MOVEM S1,CATOBJ+OBJ.UN ;SAVE IT
SETZM CATOBJ+OBJ.ND ;NO NODE INFO
MOVEI S1,<CATSIZ*5>-1 ;GET CHARACTER COUNT
MOVEM S1,CATCNT ;SAVE IT
MOVE S1,[POINT 7,CATTXT] ;GET BYTE POINTER
MOVEM S1,CATPTR ;SAVE IT
POPJ P, ;RETURN
; Character sticker
;
CATTYO: SOSLE CATCNT ;COUNT CHARACTERS
IDPB S1,CATPTR ;STUFF ONE IN THE BUFFER
$RETT ;RETURN
; Delete an entry
; Call: MOVE S1, entry address
;
CCAT.Z: MOVE S2,S1 ;GET ENTRY ADDRESS
SETZM .CTVSN(S2) ;BE DEFENSIVE
MOVE S1,CATQUE ;GET QUEUE HEADER
$CALL L%APOS ;POSITION TO IT
SKIPF ;SHOULDN'T HAPPEN
$CALL L%DENT ;DELETE IT
POPJ P, ;AND RETURN
> ;END TOPS-10 CONDITIONAL
SUBTTL D$FCAT - ROUTINE TO SEARCH THE CATALOG CACHE FOR A VOL SET
;CALL: S1/ The Vol Set Name (SIXBIT)
;
;Ret: S1/ The Entry Address
TOPS10<
D$FCAT: PUSHJ P,.SAVE1 ;SAVE P1 FOR A SECOND
MOVE P1,S1 ;SAVE THE VOL SET NAME
MOVE S1,CATQUE ;GET THE CATALOG QUEUE ID
PUSHJ P,L%FIRST ;GET THE FIRST ENTRY
JRST FCAT.2 ;JUMP THE FIRST TIME THROUGH
FCAT.1: MOVE S1,CATQUE ;GET THE CATALOG QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT ENTRY
FCAT.2: JUMPF .RETF ;NOT THERE,,RETURN NO GOOD
CAME P1,.CTVSN(S2) ;IS THIS THE ONE WE WANT ???
JRST FCAT.1 ;NO,,TRY NEXT
MOVE S1,S2 ;YES,,GET ENTRY ADDRESS
$RETT ;AND RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL D$TCAT - Type a catalogue entry
; Call: MOVE S1, entry address
; PUSHJ P,D$TCAT
;
TOPS10 < ;TOPS-10 ONLY
D$TCAT::$SAVE <P1,P2> ;SAVE SOME ACS
MOVE P1,S1 ;SAVE ENTRY ADDRESS
MOVEI S1,0 ;ASSUME NO WILDCARDING
MOVE S2,.CTOID(P1) ;GET THE OWNER PPN
TRC S2,-1 ;CHECK FOR A WILD
TRCN S2,-1 ; PROGRAMMER NUMBER
MOVEI S1,1 ;GOT ONE
TLC S2,-1 ;CHECK FOR A WILD
TLCN S2,-1 ; PROJECT NUMBER
IORI S2,2 ;GOT ONE
SKIPN S2 ;REALLY HAVE A PPN?
SETO S1, ;NO
MOVE S1,TCAT.A(S1) ;GET APPROPRIATE ITEXT BLOCK
MOVEI S2,[ITEXT (<>)] ;ASSUME NO USER NAME
SKIPE .CTNAM+0(P1) ;HAVE WORD 1?
MOVEI S2,[ITEXT (< user ^W/.CTNAM(P1)/>)] ;YES
SKIPE .CTNAM+1(P1) ;HAVE WORD 2?
MOVEI S2,[ITEXT (< user ^W6/.CTNAM(P1)/^W/.CTNAM+1(P1)/>)] ;YES
$TEXT (CATTYO,<^W/.CTVSN(P1)/ Owned by ^I/(S1)/^I/(S2)/, ^A>)
MOVE S1,.CTBLD(P1) ;GET BUILD CODE
$TEXT (CATTYO,<^T/@TCAT.B(S1)/>) ;SAY WHERE IT CAME FROM
MOVE P2,.CTCNT(P1) ;GET THE UNIT COUNT
MOVEI S1,[ASCIZ |unit:|] ;ASSUME ONE
CAIE P2,1 ;IS IT
MOVEI S1,[ASCIZ |units:|] ;MAKE IT PLURAL
$TEXT (CATTYO,< ^D/P2/ ^T/(S1)/ ^A>)
MOVEI P1,CATLEN(P1) ;POINT TO START OF VOLUME BLOCKS
TCAT.1: MOVE S1,UCBQUE ;GET THE UCB QUEUE HEADER
$CALL L%FIRST ;POSITION TO FIRST ENTRY
JRST TCAT.3 ;ONWARD
TCAT.2: MOVE S1,UCBQUE ;GET THE UCB QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT UCB ADDRESS
TCAT.3: JUMPF TCAT.4 ;NO MORE AVAILABLE,,JUST RETURN
LOAD S1,.UCBST(S2),UC.RSN ;GET THE DEVICE RESOURCE NUMBER
CAME S1,.CTRSN(P1) ;THE ONE WE'RE LOOKING FOR?
JRST TCAT.2 ;NO
IMULI S1,AMALEN ;GET 'A' MATRIX OFFSET
ADD S1,AMATRX ;GET THE 'A' MATRIX ENTRY ADDRESS
LOAD S1,.AMNAM(S1),AM.NAM ;GET ADDRESS OF ASCIZ RESOURCE NAME
MOVEI S2,[ITEXT (<>)] ;ASSUME LAST UNIT
CAIE P2,1 ;IS IT?
MOVEI S2,[ITEXT (<, ^A>)] ;NO
$TEXT (CATTYO,<^W/.CTVID(P1)/(^T/(S1)/)^I/(S2)/>)
ADDI P1,CATBLN ;POINT TO NEXT VOL BLOCK
SOJG P2,TCAT.1 ;LOOP
POPJ P, ;RETURN
TCAT.4: $TEXT (CATTYO,<Can't find UCBs for units>)
POPJ P, ;RETURN
; Table of PPN ITEXT blocks
;
[ITEXT (<no one>)]
TCAT.A: [ITEXT (<[^O/.CTOID(P1),LHMASK/,^O/.CTOID(P1),RHMASK/]>)]
[ITEXT (<[^O/.CTOID(P1),LHMASK/,*]>)
[ITEXT (<[*,.CTOID(P1),RHMASK/>)]
[ITEXT (<[*,*]>)]](S1)
; Table of build code strings
;
TCAT.B: [ASCIZ |entry came from STRLST.SYS|]
[ASCIZ |entry created by QUASAR|]
> ;END TOPS-10 CONDITIONAL
SUBTTL D$UCAT - Find the number users of a catalogue entry
; Call: MOVE S1, sixbit VSN
; PUSHJ P,D$UCAT
;
; Note: Change the call to D$SRSN if we ever cache
; other things besides disks.
;
TOPS10 < ;TOPS-10 ONLY
D$UCAT::PUSHJ P,D$SRSN ;CONVERT STR NAME TO RESOURCE NUMBER
IMULI S1,AMALEN ;GET 'A' MATRIX OFFSET
ADD S1,AMATRX ;GET THE ENTRY ADDRESS
LOAD S2,.AMCNT(S1),AM.CLM ;GET # MOUNTED
LOAD S1,.AMCNT(S1),AM.ALO ;GET # ALLOCATED
HRL S1,S2 ;PUT MOUNT COUNT IN LH
MOVSS S1 ;MAKE IT # ALLOCATED,,# MOUNTED
POPJ P, ;RETURN
> ;END TOPS-10 CONDITIONAL
SUBTTL FNDVSL - ROUTINE TO FIND A PARTICULAR VSL IN AN MDR
;CALL: S1/ The VSL Request ID
;
;RET: S1/ The VSL Address if Found
; AP/ The MDR Address
D$FVSL::
FNDVSL: PUSHJ P,.SAVE1 ;SAVE P1
MOVE P1,S1 ;SAVE THE VSL REQUEST ID
MOVE S1,VSLQUE ;GET THE VSL QUEUE ID
PUSHJ P,L%FIRST ;GET THE FIRST VSL ENTRY
JRST FNDV.2 ;JUMP THE FIRST TIME THROUGH
FNDV.1: MOVE S1,VSLQUE ;GET THE VSL QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT VSL ENTRY
FNDV.2: JUMPF .RETF ;NO MORE,,RETURN
LOAD S1,.VSRID(S2),VS.RID ;GET THE VSL REQUEST ID
CAME P1,S1 ;DO THEY MATCH ???
JRST FNDV.1 ;NO,,TRY NEXT VSL
MOVE AP,.VSMDR(S2) ;YES,,SETUP THE MDR POINTER
MOVE S1,S2 ;AND THE VSL ADDRESS
$RETT ;RETURN
SUBTTL FNDVSN - ROUTINE TO FIND A VOLUME SET VIA THE VOL SET NAME
;CALL: S1/ The Asciz Vol Set Name Address
;
;RET: S1/ The VSL Address
TOPS10<
D$FVSN::
FNDVSN: PUSHJ P,.SAVE2 ;SAVE P1 & P2 FOR A MINUTE
HRROI P2,0(S1) ;GET -1,,VOL SET NAME ADDR
LOAD P1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT
MOVNS P1 ;NEGATE IT
MOVSS P1 ;MOVE RIGHT TO LEFT
HRRI P1,.MRVSL(AP) ;CREATE VSL SEARCH AOBJN AC
DVSN.1: MOVE S1,0(P1) ;GET A VSL ADDRESS
HRROI S1,.VSVSN(S1) ;POINT TO THE VSL VOL SET NAME
MOVE S2,P2 ;GET THE SOURCE VOL SET NAME POINTER
PUSHJ P,S%SCMP ;PERFORM THE STRING COMPARE
TXNN S1,SC%LSS+SC%SUB+SC%GTR ;ANY OF THESE BITS LIT ???
JRST [MOVE S1,0(P1) ;NO SO WE MATCH,,GET THE VSL ADDRESS
$RETT ] ;AND RETURN
AOBJN P1,DVSN.1 ;NO MATCH,,TRY NEXT VSL
$RETF ;NOT THERE !!!
> ;END TOPS10 CONDITIONAL
SUBTTL FNDLNM - ROUTINE TO FIND A USERS VSL GIVEN A LOGICAL NAME
;CALL: S1/ The Asciz Vole Set Name Address
; AP/ The MDR Address
;
;RET: S1/ The VSL Address if Found
TOPS10<
D$FLNM:: ;MAKE IT GLOBAL
FNDLNM: PUSHJ P,.SAVE1 ;SAVE P1
HRROI S1,0(S1) ;POINT TO ASCIZ VOLUME SET NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
LDB S1,S1 ;GET TERMINATOR
JUMPN S1,.RETF ;MUST BE NULL FOR LOGICAL NAMES
LOAD P1,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT
MOVNS P1 ;NEGATE IT
MOVSS P1 ;MOVE RIGHT TO LEFT
HRRI P1,.MRVSL(AP) ;CREATE VSL SEARCH AOBJN AC
FNDL.1: MOVE S1,0(P1) ;GET A VSL ADDRESS
CAMN S2,.VSLNM(S1) ;DO THE LOGICAL NAMES MATCH ???
$RETT ;FOUND IT,,RETURN NOW
AOBJN P1,FNDL.1 ;CONTINUE THROUGH ALL VSL'S
$RETF ;NOT THERE,,RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL VSLFND - ROUTINE TO FIND A VSL IN A USERS REQUEST
;CALL: S1/ The Mount Msg Entry Address
; AP/ The MDR Address
;
;RET: S1/ The VSL Address
;This routine searches the users request queue looking for a VSL
;which has the same name as one which he is currently trying
;to mount. It first looks for a VSL which has the same logical
;name, then the one which has the same Vol Set Name.
TOPS10<
VSLFND: PUSHJ P,.SAVE2 ;SAVE P1 AND P2
MOVEI P1,.MEHSZ(S1) ;POINT TO THE FIRST ENTRY BLOCK
MOVE P2,.MECNT(S1) ;GET THE ENTRY COUNT
LOAD S1,.MRCNT(AP),MR.CNT ;GET THE REQUEST COUNT
JUMPE S1,.RETF ;NONE THERE,,RETURN
VSLF.1: LOAD S1,ARG.HD(P1),AR.TYP ;GET THIS BLOCK TYPE
CAXE S1,.SMNAM ;IS IT THE VOL SET NAME ???
CAXN S1,.TMSET ;IS IT THE VOL SET NAME BLOCK ???
JRST VSLF.2 ;YES,,CHECK IT OUT
LOAD S1,ARG.HD(P1),AR.LEN ;NO,,GET THIS BLOCKS LENGTH
ADD P1,S1 ;POINT TO THE NEXT BLOCK
SOJG P2,VSLF.1 ;CONTINUE FOR ALL BLOCKS
$RETF ;NO VOL SET NAME BLOCK FOUND !!!
VSLF.2: AOS P1 ;POINT TO THE ASCIZ VOL SET NAME
MOVE S1,P1 ;GET ITS ADDRESS IN S1
PUSHJ P,FNDLNM ;LOOK FOR THE LOGICAL NAME
JUMPT .RETT ;FOUND,,RETURN NOW
MOVE S1,P1 ;GET THE VOL SET NAME ADDR BACK
PJRST FNDVSN ;RETURN LOOKING FOR THE VOL SET NAME
> ;END TOPS10 CONTITIONAL
TOPS20<
VSLFND: $RETF > ;ALWAYS RETURN FALSE ON THE -20
SUBTTL GENVOL - ROUTINE TO CREATE A 'SCRATCH' VOLUME BLOCK
;CALL: S1/ The VSL Address of the User
;
;RET: True Always
GENVOL: PUSHJ P,.SAVE1 ;SAVE P1 FOR A MINUTE
MOVE P1,S1 ;SAVE THE VSL ADDRESS
MOVE S1,VOLQUE ;GET THE VOLUME LIST QUEUE ID
MOVX S2,VOLLEN ;GET THE VOL ENTRY LENGTH
PUSHJ P,L%CENT ;CREATE SPACE FOR THE VOL ENTRY
LOAD S1,.VSCVL(P1),VS.OFF ;GET THE OFFSET TO THE CURRENT VOL
ADDI S1,.VSVOL(P1) ;POINT TO THE VOL BLOCK ADDRESS
MOVEM S2,0(S1) ;LINK THE VOL TO THE VSL
MOVEM P1,.VLVSL(S2) ;LINK THE VSL TO THE VOL
MOVX S1,%STAWT ;GET 'WAITING' STATUS CODE
STORE S1,.VLFLG(S2),VL.STA ;SAVE IT IN THE VOL FLAG WORD
INCR .VLOWN(S2),VL.CNT ;BUMP THE REQUEST COUNT BY 1
LOAD S1,.VSFLG(P1),VS.LBT ;GET THE REQUESTED LABEL TYPE
STORE S1,.VLFLG(S2),VL.LBT ;AND SAVE IT IN THE VOL FLAG WRD
MOVX S1,VL.SCR ;GET THE VOLUME SCRATCH BIT
IORM S1,.VLFLG(S2) ;LITE IT IN THE VOL FLAG WORD
INCR .VSCVL(P1),VS.CNT ;MAKE THE VSL COUNT = 1
$RETT ;AND RETURN
SUBTTL ADDVOL - ROUTINE TO ADD A VOL BLOCK DURING MOUNT PROCESSING
;CALL: S1/ The Volume Name
; S2/ The VSL Address
;
;RET: The VOL Block Address
ADDVOL: PUSHJ P,.SAVE2 ;SAVE P1 AND P2 FOR A SECOND
DMOVE P1,S1 ;SAVE THE CALLING ARGS
PUSHJ P,SCNVOL ;GO FIND THE REQUESTED VOLUME
JUMPT .RETT ;FOUND ONE,,RETURN NOW
MOVE S1,VOLQUE ;GET THE VOLUME LIST QUEUE ID
MOVX S2,VOLLEN ;GET THE VOL LIST ENTRY LENGTH
PUSHJ P,L%CENT ;CREATE SPACE FOR THE VOL ENTRY
MOVEM P1,.VLNAM(S2) ;SAVE THE VOLID IN THE VOL
MOVEM P2,.VLVSL(S2) ;LINK THE VSL TO THE VOL
MOVX S1,%STAWT ;GET 'VOLUME WAITING' CODE
STORE S1,.VLFLG(S2),VL.STA ;SAVE IT AS THE VOLUME STATUS
INCR .VLOWN(S2),VL.CNT ;BUMP THE REQUEST COUNT BY 1
MOVE S1,S2 ;GET THE VOL BLK ADDR IN S1
$RETT ;RETURN
SUBTTL CKUVOL - CHECK FOR MULTIPLE USER REQUESTS FOR THE SAME TAPE VOL
; CKOVOL - SAME - BUT OPERATOR ENTRY POINT
;CALL: S1/ The VSL address
; AP/ The MDR Address
;
;RET: True - if ok
; False - The error text inserted into the generic ack buffer
TOPS10<
CKTVOL: PUSHJ P,.SAVE4 ;SAVE P1 - P4
$SAVE <T1,T2> ;SAVE T1 AND T2 ALSO
MOVE P1,S1 ;SAVE THE VSL ADDRESS
LOAD P2,.MRCNT(AP),MR.CNT ;GET THE VSL COUNT
MOVNS P2 ;NEGATE IT
MOVSS P2 ;MOVE RIGHT TO LEFT
HRRI P2,.MRVSL(AP) ;CREATE VSL AOBJN AC
CKTV.1: MOVE P3,0(P2) ;GET A VSL ADDRESS
LOAD S1,.VSFLG(P3),VS.TYP ;GET THE VSL TYPE
CAXE S1,%TAPE ;IS IT A TAPE VOLUME SET ???
JRST CKTV.6 ;NO,,TRY NEXT
CKTV.2: LOAD S1,.VSCVL(P1),VS.CNT ;GET THE VOLUME COUNT
MOVNS S1 ;NEGATE IT
MOVSS S1 ;MOVE RIGHT TO LEFT
HRRI S1,.VSVOL(P1) ;CREATE VOL AOBJN AC
CKTV.3: LOAD S2,.VSCVL(P3),VS.CNT ;GET THE VOLUME COUNT
MOVNS S2 ;NEGATE IT
MOVSS S2 ;MOVE RIGHT TO LEFT
HRRI S2,.VSVOL(P3) ;CREATE VOL AOBJN AC
MOVE P4,0(S1) ;GET THE MASTER VOL ADDRESS
SKIPN P4,.VLNAM(P4) ;AND GET ITS VOLID
JRST CKTV.6 ;NONE,,ASSUME A SCRATCH TAPE & CONTINUE
SETZM T2 ;CLEAR VOLUME COUNTER
CKTV.4: AOS T2 ;BUMP VOLUME COUNTER BY 1
MOVE T1,0(S2) ;GET THE TARGET VOL ADDRESS
CAME P4,.VLNAM(T1) ;DO VOLIDS MATCH ???
JRST CKTV.5 ;NO,,CONTINUE ONWARD !!!
CAMN P1,P3 ;YES,,SAME VOLUME SET ???
CAME S1,S2 ;YES,,SAME VOLUME SET INDEX ???
JRST CKTV.7 ;NO,,THATS AN ERROR
CKTV.5: AOBJN S2,CKTV.4 ;CHECK THROUGH ALL TARGET VOLUMES
AOBJN S1,CKTV.3 ;CHECK THROUGH ALL MASTER VOLIDS
CKTV.6: AOBJN P2,CKTV.1 ;CHECK THROUGH ALL VSL'S
$RETT ;OK,,RETURN
CKTV.7: $TEXT (<-1,,@G$ACKB>,<Volume ^W/P4/ is volume # ^D/T2/ in volume set ^T/.VSVSN(P3)/^0>)
PJRST E$XXX## ;RETURN THE ERROR
> ;END TOPS10 CONDITIONAL
TOPS20<
CKTVOL: $RETT > ;RETURN OK ON THE -20
SUBTTL MISC ROUTINES
TOPS10<
MISC.3: $WTO (<Invalid message from PULSAR>,<^M^JMSG: ^O/0(M)/, ^O/1(M)/, ^O/2(M)/, ^O/3(M)/, ^O/4(M)/^M^J^O/5(M)/, ^O/6(M)/, ^O/7(M)/, ^O/10(M)/, ^O/11(M)/>,,<$WTFLG(WT.SJI)>)
$RETT
;BLISS General Stopcode
;Call -
; S1/ Address of ASCIZ explanation
;Return -
; NEVER
D$STOP:: $STOP(BLI,^T/0(S1)/)
;Routine to tell the operator that a user requested a structure
;be dismounted
;
;CALL: S1/ The VSL Address
; AP/ The MDR Address
TELREM: MOVE S2,.VSVOL(S1) ;GET THE VOL BLOCK ADDRESS
MOVE S1,.VLNAM(S2) ;GET THE STR NAME
MOVEM S1,MDAOBJ+OBJ.UN ;SAVE IT IN THE OBJECT BLOCK
$WTO (<User requests this structure be dismounted^T/BELLS/>,<^I/DEMO/>,MDAOBJ)
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
;$TEXT Action routine and byte pointer
MDADBP:: SKIPN G$MSG+MSGLN##-1 ;CHECK FOR END OF BUFFER
IDPB S1,MDBPTR ;JUST DUMP THE CHAR
$RETT ;AND WIN
MDBPTR:: BLOCK 1 ;SPACE FOR A BYTE POINTER
SUBTTL D$MDAE - ROUTINE TO NOTIFY THE OPERATOR OF ANY ERRORS
;This routine notifies the operator of any MDA related error
;
;CALL: P/ The address of the Parameter Word
;
;RET: False Always
TOPS10<
D$MDAE::SETZM TF ;NO VSL ADDRESS
LOAD TF,@0(P),AC.VSL ;GET THE AC WHICH CONTAINS THE VSL ADDR
TXO TF,MOVE ;CREATE 'MOVE TF,AC' INSTRUCTION
XCT TF ;GET THE VSL ADDRESS IN TF
POP P,S1 ;GET THE ERROR CODE & AC ADDRESS
LOAD S1,0(S1),ER.CDE ;PICK UP THE ERROR CODE
TXNN TF,MOVE ;DO WE HAVE A VSL ADDRESS ???
JRST MDAE.1 ;YES,,PROCESS A LITTLE DIFFERENTLY !!!
$WTO (<^T/@MDAERS-1(S1)/>,,MDAOBJ) ;ELSE TELL OPERATOR
$RETF ;RETURN
MDAE.1: $SAVE <S2,T1,AP> ;SAVE SOME AC'S
MOVE S2,TF ;GET THE VSL ADDRESS IN S2
MOVE AP,.VSMDR(S2) ;GET THE MDR ADDRESS IN AP
LOAD T1,.VSCVL(S2),VS.OFF ;GET THE OFFSET TO THE CURRENT VOLUME
ADDI T1,.VSVOL(S2) ;POINT TO THE ADDRESS
MOVE T1,0(T1) ;LOAD THE CURRENT VOLUME ADDRESS
LOAD TF,.MRJOB(AP),MD.PJB ;GET THE USERS JOB NUMBER
TXNE TF,BA%JOB ;A PSEUDO PROCESS?
JRST MDAE.2 ;YES
$WTO (<^T/@MDAERS-1(S1)/>,<^I/DEMO/^M^JVolume Set:^T/.VSVSN(S2)/ Volid:^W/.VLNAM(T1)/ Request-ID: ^D/.VSRID(S2),VS.RID/>,MDAOBJ)
$RETF ;RETURN
MDAE.2: $WTO (<^T/@MDAERS-1(S1)/>,<User: [SYSTEM] for ^15/.MRFLG(AP),MR.QUE/ request #^D/TF/^M^JVolume Set:^T/.VSVSN(S2)/ Volid:^W/.VLNAM(T1)/ Request-ID: ^D/.VSRID(S2),VS.RID/>,MDAOBJ)
$RETF ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL DSKRSN - ROUTINE TO RETURN RESOURCE NUMBERS FOR DISK DRIVES
;CALL: S1/ The .UCBST status word with Kontroller type & Unit Type
;
;RET: S1/ The Device Resource Number
TOPS10<
DSKRSN: PUSHJ P,.SAVE2 ;SAVE P1 & P2 FOR A SECOND
LOAD P1,S1,UC.KTP ;GET THE KONTROLLER TYPE IN P1
LOAD P2,S1,UC.UTP ;GET THE UNIT TYPE IN P2
MOVE S1,AMATRX ;GET THE 'A' MATRIX ADDRESS
LOAD S2,.AMHDR(S1),AM.CNT ;GET THE ENTRY COUNT
JUMPE S2,.RETF ;NULL MATRIX,,SHOULD NOT HAPPEN !!!
DSKR.1: ADDI S1,AMALEN ;BUMP TO NEXT MATRIX ELEMENT
LOAD TF,.AMSTA(S1),AM.DVT ;GET THE RESOURCE TYPE
SKIPGE .AMNAM(S1) ;IS THIS ENTRY VALID?
CAXE TF,%DISK ;YES,, IS THIS A DISK RESOURCE?
JRST DSKR.2 ;NO,,TRY NEXT ENTRY
LOAD TF,.AMSTA(S1),UC.KTP ;GET THE ENTRY KONTROLLER TYPE
CAME TF,P1 ;THEY MUST MATCH..
JRST DSKR.2 ;NO,,TRY NEXT ENTRY
LOAD TF,.AMSTA(S1),UC.UTP ;GET THE ENTRY UNIT TYPE
CAME TF,P2 ;THEY MUST MATCH..
JRST DSKR.2 ;NO,,TRY NEXT ENTRY
SUB S1,AMATRX ;CALC OFFSET INTO MATRIX OF THIS ENTRY
IDIVI S1,AMALEN ;CALC RESOURCE NUMBER
$RETT ;RETURN
DSKR.2: SOJG S2,DSKR.1 ;LOOK AT ALL MATRIX ENTRIES
$RETF ;NOT THERE !!!
> ;END TOPS10 CONDITIONAL
SUBTTL TAPRSN - ROUTINE TO RETURN RESOURCE NUMBERS FOR TAPE DRIVES
;CALL: S1/ The Density Status Bits
; S2/ The Track Status Code
; T1/ The starting RSN if ANYTAP entry
;
;RET: S1/ The Device Resource Number
TOPS10<
ANYTAP: PUSHJ P,.SAVE4 ;SAVE P1 - P4
DMOVE P1,S1 ;SAVE THE DENSITY AND TRACK TYPE
MOVEI P3,0 ;SET THE ENTRY INDICATOR
MOVE S1,AMATRX ;GET THE 'A' MATRIX ADDRESS
LOAD P4,.AMHDR(S1),AM.CNT ;GET THE ENTRY COUNT
SUB P4,T1 ;GET REMAINING COUNT
JUMPLE P4,.RETF ;NO MORE ENTRIES,,RETURN
MOVE S1,T1 ;GET THE STARTING RSN IN S1
IMULI S1,AMALEN ;GET THE OFFSET
ADD S1,AMATRX ;AND THE RESOURCE ADDRESS
JRST TAPR.1 ;MEET AT THE PASS
TAPRSN: PUSHJ P,.SAVE4 ;SAVE P1 & P2 FOR A SECOND
DMOVE P1,S1 ;SAVE THE DENSITY AND TRACK TYPE
MOVEI P3,1 ;SET THE ENTRY INDICATOR
MOVE S1,AMATRX ;GET THE 'A' MATRIX ADDRESS
LOAD P4,.AMHDR(S1),AM.CNT ;GET THE ENTRY COUNT
JUMPE P4,.RETF ;NULL MATRIX,,SHOULD NOT HAPPEN !!!
TAPR.1: ADDI S1,AMALEN ;BUMP TO NEXT MATRIX ENTRY
LOAD S2,.AMSTA(S1),AM.DVT ;GET THE RESOURCE TYPE
SKIPGE .AMNAM(S1) ;IS THIS ENTRY VALID AT ALL?
CAXE S2,%TAPE ;YES,, IS THIS A TAPE RESOURCE?
JRST TAPR.2 ;NO,,TRY NEXT ENTRY
LOAD S2,.AMSTA(S1),UC.TRK ;GET THE ENTRY TRACK TYPE
CAME S2,P2 ;THEY MUST MATCH..
JRST TAPR.2 ;NO,,TRY NEXT ENTRY
MOVE S2,.AMSTA(S1) ;GET THE STATUS BITS
AND S2,[UC.200+UC.556+UC.800+UC.1600+UC.6250] ;SAVE ONLY THESE BITS
XCT [TDNN S2,P1 ;ANY BITS CAN MATCH !!!
CAME S2,P1](P3) ;ALL BITS MUST MATCH !!!
JRST TAPR.2 ;NO GOOD,,TRY NEXT ENTRY
SUB S1,AMATRX ;CALC OFFSET INTO MATRIX OF THIS ENTRY
IDIVI S1,AMALEN ;CALC THE RESOURCE NUMBER
$RETT ;RETURN
TAPR.2: SOJG P4,TAPR.1 ;LOOK AT ALL MATRIX ENTRIES
$RETF ;NOT THERE !!!
> ;END TOPS10 CONDITIONAL
SUBTTL D$TNRS - GET A TAPE RESOURCE NUMBER
; D$DNRS - GET A DISK RESOURCE NUMBER
;CALL: D$TNRS: S1/ The Density Status Bits
; S2/ The Track Status Code
;
; D$DNRS: S1/ The UCB Status Word
;
;RET: S1/ The Resource Number if valid, False otherwise
TOPS10<
D$TNRS: $SAVE <T1> ;SAVE T1
MOVEI T1,TAPRSN ;GET STATUS CHECK ROUTINE EXACT MATCH
PJRST KNOWRS ;TRY TO FIND ONE , OR A NEW ONE
D$DNRS: $SAVE <T1> ;SAVE T1
MOVEI T1,DSKRSN ;GET THE SERVICE ROUTINE ADRS
PJRST KNOWRS ;GO FIND A KNOWN RESOURCE
;This routine will find an existing resource of a given type
; or look in the permanent A matrix for drives which match
; If the entry is found in the permanent matrix, it is added
; to the existing A matrix and the new resource number is returned
KNOWRS: $SAVE <P1,P2,P3> ;SAVE P1 - P3
DMOVE P1,S1 ;SAVE THE CALLING ARGS
PUSHJ P,0(T1) ;TRY TO FIND IN THE EXISTING A MATRIX
JUMPT .RETT ;IF THAT WINS, WE'RE GOLDEN!
DMOVE S1,P1 ;GET BACK STATUS BITS
MOVEI P1,AMATPM ;AIM AT THE PERMANENT A MATRIX
EXCH P1,AMATRX ;AND POINT THE WORLD AT THAT
PUSHJ P,0(T1) ;TRY TO FIND ONE OF THOSE
JUMPF [MOVEM P1,AMATRX ;CAN'T GET IT THERE, RESTORE AMATRIX
$RETF] ;GIVE THE BAD NEWS
MOVE P3,S1 ;GOT IT, SAVE ITS INDEX
EXCH P1,AMATRX ;GET BACK TO OLD A MATRIX
PUSHJ P,GETRSN ;FIND A FREE SLOT
PUSH P,S1 ;SAVE THE NEW RESOURCE NUMBER
IMULI S1,AMALEN ;INDEX INTO THE EXISTING A MATRIX
IMULI P3,AMALEN ;INDEX INTO PERMANENT A MATRIX
ADD S1,AMATRX ;AIM AT EXISTING SLOT
ADDI P3,0(P1) ;AIM AT PERMANENT SLOT
HRL S1,P3 ;SET SOURCE FOR BLT
MOVE P3,S1 ;COPY FOR TERMINATION ADRS
BLT S1,AMALEN-1(P3) ;MOVE THE DATA IN
POP P,S1 ;GET BACK THE NEW RESOURCE NUMBER
$RETT
> ;END TOPS10 CONDITIONAL
SUBTTL STRRSN - ROUTINE TO RETURN RESOURCE NUMBERS FOR STRUCTURES
;CALL: S1/ The Sixbit Structure Name
;
;RET: S1/ The Structure Resource Number
TOPS10<
D$SRSN::
MOVX S2,%STRC ;GET RESOURCE TYPE -- FILE STRUCTURE
DEVRSN: PUSHJ P,.SAVE3 ;SAVE SOME SCRATCH REGS
MOVE P3,S2 ;SAVE THE RESOURCE TYPE
$TEXT (<-1,,TMPVSL>,<^W/S1/^0>) ;CONVERT STR NAME TO ASCII
MOVE P1,AMATRX ;GET THE 'A' MATRIX ADDRESS
LOAD P2,.AMHDR(P1),AM.CNT ;GET THE ENTRY COUNT
JUMPE P2,STRR.2 ;NULL MATRIX,,SHOULD NOT HAPPEN !!!
STRR.1: ADDI P1,AMALEN ;BUMP TO THE NEXT MATRIX ELEMENT
LOAD S2,.AMSTA(P1),AM.DVT ;GET THE RESOURCE TYPE
SKIPGE S1,.AMNAM(P1) ;IS THIS ENTRY IN USE?
CAME S2,P3 ;YES,, IS THIS THE CORRECT TYPE OF RESOURCE??
JRST STR.1A ;NOPE, TRY THE NEXT ENTRY
HRLI S1,-1 ;AIM AT THE STRING
HRROI S2,TMPVSL ;AIM AT THE DESIRED NAME
$CALL S%SCMP ;COMPARE THE NAMES
TXNE S1,SC%LSS!SC%SUB!SC%GTR ;ANY BITS ON?
JRST STR.1A ;YES, THAT'S NOT EXACT MATCH
SUB P1,AMATRX ;NO,,CALC THE RESOURCE OFFSET
IDIVI P1,AMALEN ;CALC THE RESOURCE NUMBER
MOVE S1,P1 ;MOVE IT INTO RETURN SLOT
$RETT ;AND RETURN
STR.1A: SOJG P2,STRR.1 ;LOOK AT ALL MATRIX ENTRIES
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;Here if the structure is not in the 'A' matrix,
; so add an entry for it!
;P1-P3 saved
;P3/ Resource type
;TMPVSL/ Resource name (ASCIZ)
STRR.2: PUSHJ P,GETRSN ;GET A RESOURCE NUMBER
MOVE P1,S1 ;SAVE IT
IMULI P1,AMALEN ;CALC OFFSET INTO THE MATRIX
ADD P1,AMATRX ;LOCATE THE ENTRY
MOVEI S1,AMNMLN ;GET THE NAME SPACE SIZE
$CALL M%GMEM ;GET THE SPACE
IORX S2,AM.USE ;LITE THE IN-USE BIT
MOVEM S2,.AMNAM(P1) ;SAVE THE ADRS OF THE NAME
HRLI S2,TMPVSL ;AIM AT THIS STRUCTURE NAME
HRRZI S1,AMNMLN(S2) ;FIGURE TERMINATION ADRS
BLT S2,-1(S1) ;MOVE TH NAME IN
SETZM .AMSTA(P1) ;ZERO THE STATUS WORD
STORE P3,.AMSTA(P1),AM.DVT ;SET DESIRED RESOURCE TYPE
MOVEI S2,1 ;GET DEFAULT NUMBER AVAILABLE
CAXN P3,%STRC ;IS THIS A SHARABLE RESOURCE?
MOVX S2,MAXRES ;YES,,GET MAX RESOURCE COUNT
STORE S2,.AMCNT(P1),AM.AVA ;MAKE IT THE NUMBER AVAILABLE
SUB P1,AMATRX ;CALC THE MATRIX OFFSET
IDIVI P1,AMALEN ;CALC THE RESOURCE NUMBER
MOVE S1,P1 ;COPY THE RSN OVER
$RETT ;AND RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL D$T/SVRS - Generate resource #s for Tape/Structure volumes
;CALL: S1/ VOL Block Address
;
;RET: S1/ The Volume RSN
; Volume resource number in the vol block
TOPS10<
INTERN D$TVRS ;GLOBALIZE IT
INTERN D$SVRS ;HERE ALSO
D$TVRS: SKIPA S2,[EXP %TVOL] ;RESOURCE TYPE - TAPE VOLUME
D$SVRS: MOVX S2,%STRC ;RESOURCE TYPE - STRUCTURE
LOAD TF,.VLFLG(S1),VL.RSN ;IS THERE ALREADY A RSN?
JUMPN TF,[MOVE S1,TF ;YES, COPY IT
$RETT ] ;AND WIN
$SAVE <P1,P2> ;SAVE SOME SPACE
DMOVE P1,S1 ;SAVE VOL BLK, RESOURCE TYPE
MOVE S1,.VLNAM(S1) ;GET THE SIXBIT VOLUME NAME
PUSHJ P,DEVRSN ;MAKE UP A RSN
STORE S1,.VLFLG(P1),VL.RSN ;SAVE THE RSN
$RETT ;WIN
> ;END TOPS10 CONDITIONAL
SUBTTL VALMSG - ROUTINE TO VALIDATE THE MOUNT/ALLOCATE MESSAGE
;CALL: M/ The Mount/Allocate Message Address
;
;RET: True if valid, False otherwise
VALMSG: PUSHJ P,.SAVE4 ;SAVE P1 - P4
STKVAR <MSGLEN,MNTALC> ;GET SPACE FOR MSG LEN & MOUNT STATUS
LOAD S1,.MSTYP(M),MS.CNT ;GET THE MESSAGE LENGTH
CAIL S1,.MMHSZ ;MUST BE GREATER THEN .MMHSZ AND
CAIL S1,.MMUMX ; LESS THEN .MMUMX
PJRST E$IBL## ;ELSE ITS AN ERROR
ADD S1,M ;POINT TO THE END OF THE MESSAGE
MOVEM S1,MSGLEN ;AND SAVE IT
MOVE P1,.MMARC(M) ;GET THE VOLUME SET COUNT IN P1
JUMPL P1,E$IBL## ;CAN'T BE NEGATIVE
JUMPE P1,VALM.3 ;IF 0, THEN REST OF MESSAGE MBZ
MOVEI P2,.MMHSZ(M) ;POINT TO THE FIRST MOUNT ENTRY
LOAD P3,.MSTYP(M),MS.TYP ;GET THE MSG TYPE (.QIFNC IS INTERNAL)
LOAD S1,.MEFLG(P2),ME%ALC ;GET THE FIRST ENTRY'S MOUNT/ALLOC BIT
MOVEM S1,MNTALC ;SAVE IT FOR LATER
VALM.1: CAMLE P2,MSGLEN ;MUST BE LESS OR EQUAL TO END OF MSG
PJRST E$IBL## ;NO GOOD,,RETURN INVALID MESSAGE
LOAD S1,.MEFLG(P2),ME%ALC ;GET THE MOUNT/ALLOCATE STATUS BIT
CAXE P3,.QIFNC ;IS THIS AN INTERNAL REQUEST ???
CAMN S1,MNTALC ;CAN'T MIX MOUNT/ALLOCATE IN SAME MSG
SKIPA ;INTERNAL OR MATCHING TYPES,,SKIP
PJRST E$IBL## ;HE DID,,RETURN INVALID MESSAGE
LOAD S1,.MEHDR(P2),AR.LEN ;GET THIS ENTRIES LENGTH
ADD S1,P2 ;POINT TO THE END OF THE ENTRY
MOVEI S2,.MEHSZ(P2) ;POINT TO THE DATA BLOCK AREA
CAIG S2,0(S1) ;MUST BE LESS OR EQUAL TO END OF ENTRY
SKIPG P4,.MECNT(P2) ; AND ENTRY COUNT MUST BE POSITIVE
PJRST E$IBL## ;NO,,THATS AN ERROR
VALM.2: LOAD TF,ARG.HD(S2),AR.LEN ;GET THIS BLOCK'S LENGTH
ADD S2,TF ;POINT TO THE NEXT BLOCK
CAILE S2,0(S1) ;MUST STILL BE WITHIN THE ENTRY
PJRST E$IBL## ;NO,,THATS AN ERROR
SOJG P4,VALM.2 ;CONTINUE CHECKING ALL ENTRY BLOCKS
MOVE P2,S2 ;POINT TO NEXT 'ME' ENTRY
SOJG P1,VALM.1 ;CONTINUE THROUGH ALL VOLUME SETS
CAME P2,MSGLEN ;CALC AND ACTUAL END ADDRS MUST BE EQUAL
PJRST E$IBL## ;NO,,THATS AN ERROR
$RETT ;RETURN OK
VALM.3: MOVEI P1,.OFLAG(M) ;GET FLAG WORD ADDRESS
VALM.4: AOS P1 ;POINT TO NEXT WORD
SKIPE 0(P1) ;MUST BE ZERO...
JRST E$IBL## ;NO,,THATS AN ERROR
CAMGE P1,MSGLEN ;ARE WE DONE ???
JRST VALM.4 ;NO,,CHECK NEXT
$RETT ;YES,,RETURN
SUBTTL CHKBAT - ROUTINE TO CHECK FOR BATCH REQUESTS DOING MOUNTS
;CALL: AP/ The MDR Address
;
;RET: True if OK, False if Illegal
D$CHKB:: ;GLOBALIZE IT
CHKBAT: LOAD S1,.MRJOB(AP),MD.PJB ;GET THE SENDERS JOB NUMBER
TXNE S1,BA%JOB ;ARE WE EXECUTING YET ????
JRST CHKB.4 ;NO,,THEN CHECK SCHEDULABILITY
SKIPE S1,.MRQEA(AP) ;LOAD UP THE QE ADDRESS
SKIPN S1,.QEOBJ(S1) ;ONE MORE CHECK BEFORE WE DO IT !!
$RETT ;NOT A SCHEDULED JOB,,THEN RETURN
LOAD S2,OBJPRM+.OBFLG(S1),.OPRIN ;GET THE OPR INTERVENTION FLAG
CAXN S2,.OPINY ;IS INTERVENTION ALLOWED ???
$RETT ;YES,,THEN HE IS OK !!!
MOVE S2,OBJPID(S1) ;GET THE PROCESSORS PID
MOVEM S2,G$SAB##+SAB.PD ;SET IT
MOVE S2,OBJUNI(S1) ;GET THE STREAM NUMBER
MOVEM S2,ABOSTM ;SET IT
MOVE S2,OBJNOD(S1) ;GET THE NODE NUMBER
MOVEM S2,ABONOD ;SET IT
MOVX S1,ABOLEN ;GET THE MSG LENGTH
MOVEM S1,G$SAB##+SAB.LN ;SET IT
MOVEI S2,ABOMSG ;GET THE MSG ADDRESS
MOVEM S2,G$SAB##+SAB.MS ;SET IT
PUSHJ P,C$SEND## ;SEND THE CANCEL MSG
$RETF ;RETURN
CHKB.4: SKIPN S1,.MRQEA(AP) ;CHECK AND LOAD QE ADDRESS
$STOP (MQE,Missing QE for a pseudo process)
PJRST S$INPS## ;CHECK SCHEDULABILITY AND RETURN
;Gen cancel msg here (Cheaper then generating 'on the fly')
ABOMSG: ABOLEN,,.OMCAN ;.MSTYP - LENGTH,,CANCEL MSG
0,,0 ;.MSFLG - NO FLAG BITS
-1 ;.MSCOD - ACK CODE -1 IS $LOG
0,,0 ;.OFLAG - NO FLAG BITS
0,,3 ;.OARGC - 3 DATA BLOCKS
4,,.OROBJ ;OBJECT BLOCK
.OTBAT ; BATCH QUEUE
ABOSTM: 0,,0 ; STREAM #
ABONOD: 0,,0 ; NODE NAME
2,,.CANTY ;CANCEL TYPE
.CNERR ; WITH ERROR PROCESSING
5,,.ORREA ;CANCEL REASON
ASCIZ/MOUNT request in 'No Operator Intervention' batch job is illegal/
ABOLEN==.-ABOMSG ;MESSAGE LENGTH
SUBTTL BLDVSL - ROUTINE TO BREAK DOWN MOUNT MSG ENTRIES
;CALL: S1/ The Address of the Mount Msg Entry
;
;RET: S1/ The VSL Address if Mount Entry was Valid
BLDVSL: PUSHJ P,.SAVE4 ;SAVE P1 & P2 & P3 & P4 FOR A MINUTE
MOVE P3,S1 ;SAVE THE MOUNT MSG ENTRY ADDR
PUSHJ P,VSLFND ;LOOK FOR ANOTHER VSL BY THE SAME VSN
JUMPT [MOVE P2,S1 ;FOUND ONE,,SAVE THE VSL ADDRESS
TLO P2,400000 ;MARK THIS VSL AS A DUPLICATE REQUEST
JRST BLDV.3 ] ;AND CONTINUE
MOVEI S1,VSLLEN ;GET THE VSL LENGTH
MOVEI S2,TMPVSL ;GET THE TEMP VSL ADDRESS
PUSHJ P,.ZCHNK ;CLEAR THE TEMP VSL
SETZM VOLNBR ;CLEAR THE VOLUME-SET VOLUME COUNT
SETZM STRVOL ;AND THE STARTING VOLUME ID
MOVE S1,VSLQUE ;GET THE VSL QUEUE ID
PUSHJ P,L%LAST ;POSITION TO THE END OF THE VSL
MOVE S1,VOLQUE ;GET THE VOLUME QUEUE ID
PUSHJ P,L%LAST ;POSITION TO THE END OF THE LIST
MOVEI P2,TMPVSL ;POINT TO OUR TEMP VSL
MOVX S1,VS.OPR+VS.WAL+VS.ALC ;GET NOTIFY OPR+ALLOCATE WAIT BITS
MOVEM S1,.VSFLG(P2) ;SET THEM
LOAD S1,.MEHDR(P3),AR.TYP ;GET THE ENTRY TYPE
MOVX S2,%UNKN ;DEFAULT TO UNKNOWN
CAXN S1,.MNTTP ;IS THIS A TAPE MOUNT REQUEST ???
MOVX S2,%TAPE ;YES,,SAY SO
CAXN S1,.MNTST ;IS IT A STRUCTURE ???
MOVX S2,%DISK ;YES,,SAY SO
TOPS20< CAXN S1,.DSMST ;IS IT DISMOUNT STRUCTURE ???
MOVX S2,%DSMT > ;YES,,SAY SO
STORE S2,.VSFLG(P2),VS.TYP ;SAVE THE REQUEST TYPE
LOAD S1,.MEFLG(P3),ME%ALC ;GET THE ALLOCATE BIT
STORE S1,.VSFLG(P2),VS.UAL ;SET/CLEAR USER ALLOCATED
TOPS10< MOVX S1,DEFLBT ;GET THE DEFAULT LABEL TYPE
STORE S1,.VSFLG(P2),VS.LBT > ;AND SAVE IT
AOS S1,REQIDN## ;BUMP AND LOAD THE REQUEST COUNT
STORE S1,.VSRID(P2),VS.RID ;SAVE IT FOR THIS VOLUME SET REQUEST
MOVE S1,G$NOW## ;GET THE CURRENT TIME
MOVEM S1,.VSCRE(P2) ;SAVE AS REQUEST CREATION TIME
MOVE P1,P3 ;SAVE THE MSG ENTRY START ADDRESS
ADDI P1,.MEHSZ ;POINT TO THE FIRST MESSAGE BLOCK
MOVE P4,.MECNT(P3) ;GET THE VOLUME SET BLOCK COUNT IN P4
BLDV.1: LOAD S1,ARG.HD(P1),AR.TYP ;GET THE BLOCK TYPE
SKIPE S1 ;BLOCK TYPE CANT BE 0
CAILE S1,%MDMAX ;OR GREATER THEN DEFINE BLOCK TYPES
PJRST BLDV.4 ;ELSE THATS AN ERROR !!!
LOAD S1,MDRDSP(S1) ;GET THE BLOCK PROCESSOR ADDRESS
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
BLDV.2: PUSHJ P,0(S1) ;GO PROCESS THE BLOCK
JUMPF BLDV.4 ;NO GOOD,,THATS AN ERROR
LOAD S1,ARG.HD(P1),AR.LEN ;GET THE BLOCK LENGTH
ADD P1,S1 ;POINT TO THE NEXT BLOCK
SOJG P4,BLDV.1 ;CONTINUE THROUGH ALL VOL-SET BLOCKS
SKIPN .VSVSN(P2) ;ANY VOL SET NAME SPECIFIED ???
PJRST E$IVN## ;NO,,THEN INVALID VOLUME SET NAME !!!
MOVE S1,P2 ;GET THE VSL ADDRESS IN S1
PUSHJ P,I$CUNK## ;CHECK FOR 'UNKNOWN' REQUEST TYPES
CAIE P2,TMPVSL ;POINTING TO TEMP VSL ???
JRST BLDV.3 ;NO,,THEN ALLS OK
MOVE S1,VSLQUE ;GET THE VSL QUEUE ID
MOVX S2,VSLLEN ;GET THE VSL ENTRY LENGTH
PUSHJ P,L%CENT ;CREATE SPACE FOR THE VSL ENTRY
MOVE P2,S2 ;SAVE THE NEW VSL ENTRY ADDRESS
HRLI S1,TMPVSL ;GET THE SOURCE VSL ADDRESS
HRRI S1,0(P2) ;GET THE DEST VSL ENTRY ADDRESS
BLT S1,VSLLEN-1(P2) ;COPY THE VSL OVER
LOAD S1,.VSFLG(P2),VS.TYP ;GET THE REQUEST TYPE
CAXE S1,%TAPE ;IS IT A TAPE REQUEST ???
JRST BLD.2A ;NO,,GEN A VOL BLOCK FOR THE REQUEST
MOVE S1,P2 ;YES,,GET THE VSL ADDRESS
PUSHJ P,GENVOL ;GEN A SCRATCH VOL BLOCK
MOVX S1,TM%NEW+TM%SCR ;GET SCRATCH OR NEW STATUS BITS
TDNE S1,.MEFLG(P3) ;WAS /SCRATCH OR /NEW REQUESTED ???
JRST BLDV.3 ;YES,,CONTINUE
PUSHJ P,E$RNS## ;UH OH,,A REEL ID IS REQUIRED !!!
JRST BLDV.4 ;RETURN THE ERROR !!!
BLD.2A: HRROI S1,.VSVSN(P2) ;POINT TO THE VOL SET NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
MOVE S1,S2 ;SAVE THE VOLUME NAME IN S1
MOVE S2,P2 ;GET THE VSL ADDRESS IN S2
PUSHJ P,ADDVOL ;ADD A VOL BLOCK
MOVEM S1,.VSVOL(P2) ;LINK THE VOL TO THE VSL
INCR .VSCVL(P2),VS.CNT ;BUMP THE VOLUME COUNT
BLDV.3: TDZA P4,P4 ;INDICATE A NORMAL RETURN
BLDV.4: SETOM P4 ;INDICATE AN ERROR RETURN
LOAD S1,.MRCNT(AP),MR.LNK ;GET THE VSL LINK CODE
STORE S1,.VSRID(P2),VS.LNK ;SET IT
JUMPN P4,BLDV.5 ;IF AN ERROR,,SKIP THIS
LOAD P1,.VSFLG(P2),VS.TYP ;GET THE VSL TYPE
CAXN P1,%DISK ;IS IT A STRUCTURE ???
PUSHJ P,DEFDSK ;YES,,DEFAULT IT
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
CAXN P1,%TAPE ;IS IT A TAPE REQUEST ???
PUSHJ P,DEFTAP ;YES,,DELAULT IT
CAXN P1,%DTAP ;IS IT A DECTAPE REQUEST ?
PUSHJ P,DEFDTA ;YES - DEFAULT IT
JUMPF [SETOM P4 ;CAN'T DEFAULT,,INDICATE AN ERROR RETURN
PJRST BLDV.5 ] ;AND EXIT
LOAD S1,.MEFLG(P3),ME%ALC ;GET THE ALLOCATE/MOUNT BIT
LOAD S2,.VSFLG(P2),VS.ALC ;GET THE VOL SET STATE BIT
AND S1,S2 ;PERFORM SOME MAGIC !!!
STORE S1,.VSFLG(P2),VS.ALC ;SET/CLEAR THE ALLOCATE/MOUNT BIT
TLZE P2,400000 ;WAS THIS A DUPLICATE VOL SET REQUEST ??
JRST [MOVE S1,P2 ;YES,,GET THE VSL ADDR IN S1
$RETT ] ; AND RETURN NOW
;Here to Link to MDR and VSL together and Update the request count
BLDV.5: LOAD S1,.MRCNT(AP),MR.CNT ;GET THE VSL REQUEST COUNT
ADDI S1,.MRVSL(AP) ;POINT TO THE CURRENT VSL ADDRESS
MOVEM P2,0(S1) ;LINK THE VSL TO THE MDR
MOVEM AP,.VSMDR(P2) ;LINK THE MDR TO THE VSL
INCR .MRCNT(AP),MR.CNT ;BUMP THE VSL COUNT BY 1
MOVE S1,P2 ;GET THE VSL ADDRESS
JUMPN P4,.RETF ;NO GOOD,,RETURN NOW
CAXN P1,%TAPE ;IS THIS A TAPE MOUNT ???
PUSHJ P,CKTVOL ;CHECK OUT THE TAPE VOLUMES REQUESTED
MOVE S1,P2 ;GET THE VSL ADDRESS BACK
POPJ P, ;RETURN GOOD OR BAD...
SUBTTL VSL DEFAULTING ROUTINES
DEFTAP: MOVE S1,.MEFLG(P3) ;GET THE REQUEST FLAG WORD
MOVE S2,.VSFLG(P2) ;GET OUR FLAG WORD
TLNN P2,400000 ;IS THIS THE FIRST TIME AROUND ??
TXO S2,VS.WLK ;YES,,DEFAULT TO WRITE-LOCKED
TXNE S1,TM%SCR ;IS THIS A TEMP VOLUME SET ???
TXO S2,VS.SCR ;YES,,SAY SO
TXNE S1,TM%NEW ;IS THIS A NEW VOLUME SET ???
TXO S2,VS.NEW ;YES,,SAY SO
TXNE S1,TM%WEN+TM%SCR+TM%NEW ;WRITE ENABLED OR SCRATCH OR NEW ???
TXZ S2,VS.WLK ;YES,,MAKE IT WRITE ENABLED !!!
TXNE S1,TM%WLK ;ARE WE WRITE LOCKED ???
TXO S2,VS.WLK ;YES,,SAY SO
MOVEM S2,.VSFLG(P2) ;SAVE OUR FLAG WORD
TOPS10< TLNE P2,400000 ;IS THIS A DUPLICATE MOUNT REQUEST ???
$RETT ;YES,,CAN'T MODIFY THE ATTRIBUTES !!!!
MOVE S1,.VSATR(P2) ;GET THE REQUESTED ATTRIBUTES
LOAD S2,S1,VS.TRK ;GET THE REQUESTED TRACK TYPE
SKIPN S2 ;SPECIFY ANY TRACK TYPE ???
TXO S1,FLD(DEFTRK,VS.TRK)+VS.DTK ;NO,,DEFAULT IT
LOAD S2,S1,VS.DEN ;GET THE REQUESTED DENSITY
JUMPN S2,DEFT.1 ;IF SPECIFIED,,DO NOT DEFAULT
LOAD S2,S1,VS.TRK ;GET THE TRACK TYPE
CAXN S2,%TRK7 ;IS IT A 7 TRACK REQUEST ???
TXO S1,FLD(DEF7TK,VS.DEN)+VS.DDN ;YES,,DEFAULT DENSITY
CAXE S2,%TRK7 ;IS IT A 9 TRACK REQUEST ???
TXO S1,FLD(DEF9TK,VS.DEN)+VS.DDN ;YES,,DEFAULT DENSITY
DEFT.1: MOVEM S1,.VSATR(P2) ;SAVE THE ATTRIBUTES.
LOAD S1,.VSATR(P2),VS.DEN ;GET THE DENSITY STATUS CODE
MOVE S1,D$DEN(S1) ;CONVERT IT TO A BIT MASK
LOAD S2,.VSATR(P2),VS.TRK ;GET THE TRACK STATUS CODE
SETZM T1 ;START AT THE TOP OF THE RESOURCE LIST
PUSHJ P,ANYTAP ;GET THE TAPE RESOURCE NUMBER
JUMPF E$NUA## ;NO,,RETURN 'NO UNITS AVAILABLE'
STORE S1,.VSATR(P2),VS.RSN ;SAVE THE REQUESTED DEVICE TYPE
> ;END TOPS10 CONDITIONAL
$RETT ;RETURN
DEFDSK:
TOPS10< MOVE S1,.MEFLG(P3) ;GET THE REQUEST FLAG WORD
MOVE S2,.VSFLG(P2) ;GET OUR FLAG WORD
TXZ S2,VS.WLK!VS.PAS!VS.NOC!VS.ARD ;RESET BITS FROM MOUNT MESSAGE
TXNE S1,TM%WLK ;ARE WE WRITE LOCKED ???
TXO S2,VS.WLK ;YES,,SAY SO
TXNE S1,SM%PAS ;WANT IT IN PASSIVE HALF?
TXO S2,VS.PAS ;YES, LITE IT
TXNE S1,SM%NOC ;WANT NO-CREATE?
TXO S2,VS.NOC ;YES, LITE THAT
TXNE S1,SM%ARD ;WANT TO ALWAYS RECOMPUTE DISK USAGE?
TXO S2,VS.ARD ;YES
TXNE S1,SM%EXC ;WANT SINGLE ACCESS?
TLNE P2,400000 ;IS THIS THE FIRST TIME AROUND ?
SKIPA ;NOT /SINGLE OR MOUNTED AGAIN !
TXO S2,VS.SIN ;YES, SAY SO
MOVEM S2,.VSFLG(P2) ;SAVE FLAG WORD
HRRZ S1,P2 ;GET THE VSL ADDR IN S1
PUSHJ P,GETCAT ;MAKE SURE ITS IN OUR CATALOG
> ;END TOPS10 CONDITIONAL
$RETT ;RETURN
DEFDTA:
TOPS10< MOVE S1,.MEFLG(P3) ;GET THE REQUEST FLAG WORD
MOVE S2,.VSFLG(P2) ;GET OUR FLAG WORD
TLNN P2,400000 ;IS THIS THE FIRST TIME AROUND ??
TXO S2,VS.WLK ;YES,,DEFAULT TO WRITE-LOCKED
TXNE S1,TM%SCR ;IS THIS A TEMP VOLUME SET ???
TXO S2,VS.SCR ;YES,,SAY SO
TXNE S1,TM%NEW ;IS THIS A NEW VOLUME SET ???
TXO S2,VS.NEW ;YES,,SAY SO
TXNE S1,TM%WEN+TM%SCR+TM%NEW ;WRITE ENABLED OR SCRATCH OR NEW ???
TXZ S2,VS.WLK ;YES,,MAKE IT WRITE ENABLED !!!
TXNE S1,TM%WLK ;ARE WE WRITE LOCKED ???
TXO S2,VS.WLK ;YES,,SAY SO
MOVEM S2,.VSFLG(P2) ;SAVE OUR FLAG WORD
> ;END TOPS10 CONDITIONAL
$RETT ;RETURN
SUBTTL MOUNT REQUEST BLOCK PROCESSOR ROUTINES
;DENSITY BLOCK PROCESSOR
MNTDEN:
LOAD S1,ARG.HD(P1),AR.LEN ;GET THE BLOCK LENGTH
CAIE S1,2 ;MUST BE 2
PJRST E$IDE## ;Else bad density
MOVE S1,ARG.DA(P1) ;GET THE DENSITY
JUMPL S1,E$IDE ;CAN'T BE NEGATIVE
CAXLE S1,DENLEN ;CAN'T BE GREATER THEN TABLE LENGTH
PJRST E$IDE ;YES,,THATS AN ERROR
STORE S1,.VSATR(P2),VS.DEN ;STORE DENSITY INDEX
PJRST CHKTAP ;MAKE SURE THIS WAS A TAPE REQUEST !!!
MNTPRT:
TOPS10< LOAD S1,ARG.HD(P1),AR.LEN ;GET THE BLOCK LENGTH
CAIE S1,2 ;MUST BE 2
$RETF ;ELSE BAD BLOCK
MOVE S1,ARG.DA(P1) ;GET THE PROTECTION
CAIG S1,777 ;SEE IF WITHIN RANGE
SKIPGE S1 ; . . .
$RETF ;NO, RETURN FALSE
STORE S1,.VSATR(P2),VS.PRT ;STORE THE PROTECTION CODE
> ;END TOPS10 CONDITIONAL
PJRST CHKTAP ;MAKE SURE THIS WAS A TAPE REQUEST !!!
;DRIVE TYPE BLOCK PROCESSOR
MNTDRV: LOAD S1,ARG.HD(P1),AR.LEN ;GET THE BLOCK LENGTH
CAIE S1,2 ;MUST BE 2
$RETF ;ELSE RETURN
MOVE S1,ARG.DA(P1) ;GET THE DRIVE TYPE
MOVX S2,%TRK9 ;DEFAULT TO A 9 TRACK REQUEST
CAXN S1,.TMDR7 ;IS IT A SEVEN TRACK REQUEST ???
MOVX S2,%TRK7 ;YES,,SAY SO
STORE S2,.VSATR(P2),VS.TRK ;SAVE THE REQUEST TRACK TYPE
PJRST CHKTAP ;MAKE SURE THIS WAS A TAPE REQUEST !!!
;LABEL TYPE BLOCK PROCESSOR
MNTLT: LOAD S1,ARG.HD(P1),AR.LEN ;GET THE BLOCK LENGTH
CAIE S1,2 ;MUST BE 2
PJRST E$ILT## ;ELSE INVALID LABEL TYPE
MOVE S1,ARG.DA(P1) ;GET THE LABEL TYPE
CAXL S1,%TFMIN ;CHECK RANGE
CAXLE S1,%TFMAX ;MUST BE BETWEEN THE MIN AND MAX VALUES
PJRST E$ILT## ;INVALID LABEL TYPE
STORE S1,.VSFLG(P2),VS.LBT ;AND SAVE IT
CAXN S1,%TFLBP ;DOES HE WANT BYPASS PROCESSING ???
SKIPE [NPRTLB] ;YES,,IS IT OK FOR ALL USERS ???
PJRST CHKTAP ;NOT BLP OR OK FOR ALL USERS,,WIN
PUSHJ P,A$WHEEL## ;IS HE PRIV'D ???
JUMPF E$PRB## ;NO,,TOO BAD !!!
PJRST CHKTAP ;MAKE SURE THIS WAS A TAPE REQUEST !!!
;VOLUME SET NAME BLOCK PROCESSOR
MNTSET: LOAD S1,ARG.HD(P1),AR.LEN ;GET THE BLOCK LENGTH
SUBI S1,1 ;SUBTRACT OFF THE HEADER LENGTH
CAILE S1,VSNLEN ;MUST BE LESS OR EQUAL VSNLEN
PJRST E$IVN## ;RETURN INVALID VOL SET NAME !
TOPS10< HRROI S1,ARG.DA(P1) ;GET THE SOURCE VOLUME SET NAME
HRROI S2,.VSVSN(P2) ;GET THE DESTINATION ADDRESS
PUSHJ P,STRVSN ;STORE IT
JUMPF .RETF ;RETURN IF INVALID VOL SET NAME
> ;End TOPS10 conditional
TOPS20<
SETVSN: $TEXT (<-1,,.VSVSN(P2)>,<^W/ARG.DA(P1)/^0>) ;SIXBIT VSN TO ASCII
MOVE S2,ARG.DA(P1) ;Get SIXBIT VSN
> ;End TOPS20 conditional
SKIPN .VSLNM(P2) ;Do we have logical name?
MOVEM S2,.VSLNM(P2) ;No..store default
$RETT ;RETURN
;Here to make sure the request is a tape request
CHKTAP: LOAD S1,.VSFLG(P2),VS.TYP ;GET THE VOL SET TYPE
CAXN S1,%TAPE ;IS IT A TAPE REQUEST ???
$RETT ;YES..ALL IS FINE
CAXE S1,%UNKN ;IS IT AN UNKNOWN REQUEST ???
PJRST E$ISA## ;NO,,Invalid structure attribute
MOVX S1,%TAPE ;GET 'TAPE' REQUEST TYPE
STORE S1,.VSFLG(P2),VS.TYP ;SET IT
$RETT ;RETURN
;Here to make sure the request is a disk request
CHKDSK: LOAD S1,.VSFLG(P2),VS.TYP ;GET THE VOL SET TYPE
CAXN S1,%DISK ;IS IT A DISK REQUEST??
$RETT ;YES..ALL IS FINE
CAXE S1,%UNKN ;IS IT AN UNKNOWN REQUEST??
PJRST E$ITA## ;NO,,Invalid tape attribute
MOVX S1,%DISK ;GET 'DISK' REQUEST TYPE
STORE S1,.VSFLG(P2),VS.TYP ;SET IT
$RETT ;RETURN
TOPS10 <
;STRVSN - Routine to validate and store Volume Set name
;Translates lower case to upper and checks to make sure
;that only characters "A-Z", "0-9" and "_" are included
;ACCEPTS S1/ Pointer to source string
; S2/ Pointer to destination address
;RETURNS TRUE S1/ Sixbit equivalent of string or 0
; S2/ Sixbit abbriviation of string
;RETURNS FALSE E$IVN (Invalid Volume Set Name)
STRVSN: $SAVE <P1,P2> ;Save some AC's
TLCE S1,-1 ;Make real pointers
TLCN S1,-1
HRLI S1,(POINT 7)
TLCE S2,-1
TLCN S2,-1
HRLI S2,(POINT 7)
MOVE P1,S1 ;Copy source pointer
STRVS1: ILDB P2,P1 ;Get a source byte
CAIL P2,"a" ;Lower case?
SUBI P2,"a"-"A" ;Yes..raise it
CAIL P2,"A" ;Alpha?
CAILE P2,"Z"
JRST [CAIL P2,"0" ;No..numeric?
CAILE P2,"9"
JRST [CAIE P2,"-" ;No..hypen or null?
JUMPN P2,E$IVN##
JRST .+1] ;Yes..then store it
JRST .+1] ;Store numeric
IDPB P2,S2 ;Store the character
JUMPN P2,STRVS1 ;Terminate after null
$CALL S%SIXB ;Get sixbit abbriv.
LDB S1,S1 ;Get terminator
SKIPN S1 ;Was it null?
SKIPA S1,S2 ;Yes..return sixbit
SETZM S1 ;No..return 0
$RETT
> ;End TOPS10 conditional
;LOGICAL NAME BLOCK PROCESSOR
MDRLNM: LOAD S1,ARG.HD(P1),AR.LEN ;GET THE BLOCK LENGTH
CAIE S1,2 ;LENGTH MUST BE 2
$RETF ;ELSE RETURN
MOVE S1,ARG.DA(P1) ;GET THE LOGICAL NAME
MOVEM S1,.VSLNM(P2) ;SAVE IT
$RETT ;AND RETURN
;STARTING VOLUME BLOCK PROCESSOR
MNTSTV: LOAD S2,ARG.HD(P1),AR.LEN ;GET THE BLOCK LENGTH
MOVE S1,ARG.DA(P1) ;GET THE FIRST DATA WORD
CAIN S2,2 ;IS THE BLOCK LENGTH 2 ???
JRST MNTS.1 ;YES,,GO PROCESS THIS FORMAT
CAIE S2,3 ;OR IS THE BLOCK LENGTH 3 ???
$RETF ;ELSE THATS AN ERROR
SKIPE ARG.DA(P1) ;THIS MUST BE NULL
$RETF ;ELSE THATS AN ERROR
MOVE S1,ARG.DA+1(P1) ;GET THE SIXBIT STARTING VOLUME ID
MNTS.1: MOVEM S1,STRVOL ;SAVE IT HERE FOR A MINUTE
CAIE P2,TMPVSL ;ARE WE POINTING AT THE TEMP VSL ???
PJRST UPDSVL ;NO,,GO UPDATE STARTING VOLUME INFO
PJRST CHKTAP ;MAKE SURE THIS WAS A TAPE REQUEST !!!
;REMARK BLOCK PROCESSOR
MNTRMK: $SAVE <P4> ;SAVE P4 FOR A MINUTE
LOAD P4,ARG.HD(P1),AR.LEN ;GET THE BLOCK LENGTH
SUBI P4,1 ;GET THE TEXT LENGTH
IMULI P4,5 ;GET THE LENGTH IN BYTES
CAILE P4,^D59 ;WILL WE FIT ???
MOVEI P4,^D59 ;NO,,MAKE IT FIT
MOVEI S1,ARG.DA(P1) ;POINT TO THE SOURCE TEXT
HRLI S1,(POINT 7,0) ;MAKE IT A BYTE POINTER
MOVE S2,[POINT 7,.VSREM(P2)] ;GET THE DESTINATION BYTE POINTER
MNTR.1: ILDB TF,S1 ;GET A BYTE
IDPB TF,S2 ;SAVE IT
JUMPE TF,.RETT ;END ON A NULL
SOJG P4,MNTR.1 ;OR 59 CHARACTERS (WHICHEVER IS FIRST)
$RETT ;AND RETURN
;VOLUME LIST BLOCK PROCESSOR
MNTVOL: CAIE P2,TMPVSL ;MUST BE POINTING AT THE TEMP VSL !!!
$RETF ;NO,,THATS AN ERROR
TOPS10< LOAD S1,.VSFLG(P2),VS.TYP ;GET THE REQUEST TYPE
CAXN S1,%DISK ;CAN'T BE A STRUCTURE
PJRST E$ISS## ;YES,,THATS AN ERROR
> ;END TOPS10 CONDITIONAL
;WEED OUT DUPLICATE MSG VOLUME BLOCKS (only last one counts)
MOVE S1,P1 ;GET THE VOL BLOCK HDR ADDR IN S!
MOVE S2,.MECNT(P3) ;GET THE REMAINING BLOCK CNT IN S2
MNTV.A: LOAD TF,ARG.HD(S1),AR.LEN ;GET THE BLOCK LENGTH
ADD S1,TF ;POINT TO THE NEXT MSG BLOCK
LOAD TF,ARG.HD(S1),AR.TYP ;GET ITS TYPE
CAXE TF,.TMVOL ;IF THE A TAPE VOLUME ???
CAXN TF,.SMALI ;OR IS IT A STRUCTURE VOLUME ???
$RETT ;YES,,IGNORE THE CURRENT VOL BLOCK
SOJG S2,MNTV.A ;NO,,TRY NEXT MSG BLOCK
LOAD S2,ARG.HD(P1),AR.LEN ;GET THE BLOCK LENGTH
SOJLE S2,.RETF ;CANT BE 1 OR NEGATIVE !!!
CAILE S2,^D60 ;MUST BE LESS THE 60 VOLUMES
$RETF ;ELSE THAT AN ERROR
MOVEM S2,VOLNBR ;SAVE THE VOLUME COUNT
ADDI S2,VSLLEN ;Calc the VSL length
MOVE S1,VSLQUE ;GET THE VSL QUEUE ID
PUSHJ P,L%CENT ;CREATE SPACE FOR THE VSL ENTRY
MOVE P2,S2 ;SAVE THE NEW VSL ADDRESS
HRLI S1,TMPVSL ;GET THE SOURCE VSL ADDRESS
HRRI S1,0(P2) ;GET THE DEST VSL ADDRESS
BLT S1,VSLLEN-1(P2) ;COPY THE PROTOTYPE VSL OVER
MOVE T1,VOLNBR ;GET THE VOLUME COUNT
MOVEI T2,.VSVOL(P2) ;POINT T2 AT THE VSL VOL ADDRESSES
MOVEI T3,ARG.DA(P1) ;POINT T3 AT THE VOLUME LIST
MNTV.B: MOVE S1,0(T3) ;PICK UP THE VOLUME NAME IN S1
MOVE S2,P2 ;GET THE VSL POINTER IN S2
PUSHJ P,ADDVOL ;ADD A VOL BLOCK
MOVEM S1,0(T2) ;LINK THE VOL TO THE VSL
INCR .VSCVL(P2),VS.CNT ;BUMP THE VOLUME COUNT BY 1
SKIPN .VLNAM(S1) ;WAS IT VALID ???
PJRST E$VID## ;UH OH,,NULL VOLIDS ARE ILLEGAL !!!
MNTV.C: AOS T2 ;POINT TO THE NEXT VSL VOLUME
AOS T3 ;POINT TO THE NEXT MSG VOLUME
SOJG T1,MNTV.B ;CONTINUE TILL DONE
MOVE S1,.VSVOL(P2) ;Pick up the first volume name
MOVE S1,0(S1) ;Get the first volume name
MOVEM S1,0(T2) ;Used by INFORMATION MOUNT/ALL
TOPS20< SKIPN .VSVSN(P2) ;ANY VOLUME SET NAME YET ???
PUSHJ P,SETVSN > ;NO,,GEN ONE !!!
SKIPE S1,STRVOL ;CHECK AND LOAD THE STARTING VOLUME ID
PJRST UPDSVL ;SOMETHING THERE,,UPDATE STARTING VOLUME
MOVX S1,VS.REL ;GET REEL ID SPECIFIED FLAG
IORM S1,.VSFLG(P2) ;SET IT
$RETT ;RETURN
SUBTTL Count the number of requests needing a structure
; Count up the number of requests requiring a structure
; Call: MOVE S1, VOL block address
; PUSHJ P,D$NREQ
; On return, S1:= #requests
;
TOPS10 < ;MDA ONLY
D$NREQ::
CTNREQ: $SAVE <P1,P2,P3,P4> ;SAVE SOME ACS
MOVE P1,S1 ;SAVE THE VOL BLK ADRS
LOAD P2,.VLOWN(P1),VL.CNT ;GET THE NUMBER OF REQUESTORS
JUMPE P2,NREQ.4 ;NONE, SAY SO
MOVNS P2 ;NEGATE IT
MOVSS P2 ;TO LEFT HALF
HRRI P2,.VLVSL(P1) ;AIM AT THE LIST OF VSL POINTERS
SETZ P1, ;CLEAR COUNT OF USERS
NREQ.1: MOVX TF,VL.ASN ;GET THE 'MOUNTED' BIT
TDNN TF,0(P2) ;DOES THIS REQUESTOR (VSL) OWN IT?
JRST NREQ.3 ;NO, TRY THE NEXT VSL
MOVE S1,0(P2) ;AIM AT THE VSL
SKIPN S1,.VSMDR(S1) ;BACK UP TO THE MDR
PUSHJ P,S..IMV ;OOPS!!
MOVE P4,S1 ;SAVE THE MDR ADDRESS
LOAD S2,.MRJOB(P4),MD.PJB ;GET THE JOB NUMBER
TXNE S2,BA%JOB ;PSEUDO PROCESS ???
AOS P1 ;COUNT IT
NREQ.3: AOBJN P2,NREQ.1 ;CHECK ALL THE REQUESTORS
SKIPA S1,P1 ;GET NUMBER OF REQUESTS
NREQ.4: SETZ S1, ;HERE IF NO REQUESTS
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL BLDSTR - ROUTINE TO PIECE TOGETHER VOL BLKS AND MAKE A STRUCTURE
;CALL: S1/ The Structure Name we want
; S2/ The Alias Name or 0
;
;RET: True if a Structure Can be Built, False Otherwise
TOPS10 <
BLDSTR: PUSHJ P,.SAVE2 ;SAVE P1 - P2
SKIPN S2 ;IS S2 NULL ???
MOVE S2,S1 ;MAKE THE ALIAS THE STRUCTURE NAME
MOVE P2,S2 ;SAVE THE ALIAS FOR LATER
MOVE P1,S1 ;SAVE THE STRUCTURE NAME
PUSHJ P,FNDISK ;FIND THE PRIMARY STR IN THE VOL QUEUE
$RETIF ;RETURN IF NOT FOUND
MOVE P1,S1 ;SAVE THE PRI STR VOL ADDRESS
BLDS.1: SKIPN .VLUCB(S1) ;IS THE VOLUME SPINNING ???
$RETF ;NO
SKIPN S1,.VLNXT(S1) ;ANOTHER VOL IN THE STRUCTURE ?
JRST BLDS.2 ;NO,,WE HAVE ALL THE REQUIRED VOLS !!!
PUSHJ P,FNDDSK ;YES,,GO FIND IT IN OUR DATA BASE
JUMPT BLDS.1 ;FOUND IT,,GO CHECK IT OUT
$RETF ;RETURN
BLDS.2: LOAD S1,.VLFLG(P1),VL.STA ;GET THE STRUCTURE STATUS BITS
CAXN S1,%STAMN ;IS IT MOUNTED ???
$RETT ;YES,,RETURN
MOVE S1,P1 ;GET PRIMARY VOL BLOCK ADDRESS
PUSHJ P,D$GENC ;GENERATE A CATALOG ENTRY
JUMPF BLDS.3 ;CAN'T DO IT
DMOVE S1,P1 ;GET VOL ADDR AND ALIAS NAME
SETZM WRTLCK ;CLEAR WRITE-LOCKED FLAG
PUSHJ P,SNDBLD ;TELL PULSAR TO BUILD THE STRUCTURE
$RETT ;AND RETURN
BLDS.3: $WTO (<Cannot mount structure ^W/P2/>,,,<$WTFLG(WT.SJI)>)
$RETF ;RETURN
> ;END TOPS-10 CONDITIONAL
SUBTTL SNDBLD - ROUTINE TO LINK THE STR VOL BLKS AND SEND STR BUILD MSG
; SNDDSM - ROUTINE TO SEND DISMOUNT STR MSG AND DELETE VOL BLKS
;CALL: S1/ The Primary STR VOL Block Address
; S2/
; SNDBLD - The Structure Name
; SNDDSM - Any flag bits (.DMNCK)
;
;RET: True Always
TOPS10 <
SNDDSM: PUSHJ P,.SAVE4 ;SAVE ALL THE P'S
MOVE P3,S2 ;SAVE THE FLAGS
LOAD S2,.VLNAM(S1) ;GET THE STRUCTURE NAME
SETZB TF,WRTLCK ;INDICATE 'SNDDSM' ENTRY POINT
JRST SNDB.0 ;AND ENTER THE COMMON CODE
SNDBLD: PUSHJ P,.SAVE4 ;SAVE ALL P AC'S
SETOM TF ;INDICATE 'SNDBLD' ENTRY POINT
SETZ P3, ;NO FLAGS
SNDB.0: MOVE P1,S1 ;SAVE THE PRI STR VOL ADDRESS
MOVE P2,TF ;SAVE THE ENTRY POINT INDICATOR
PUSH P,S2 ;SAVE THE STRUCTURE NAME
PUSHJ P,M%GPAG ;GET A PAGE FOR IPCF
MOVEM S1,G$SAB##+SAB.MS ;SAVE ITS ADDRESS IN THE SAB
MOVE S2,[.OHDRS+1,,.QOBLD] ;DEFAULT TO BUILD STR MSG HEADER
SKIPN P2 ;UNLESS WE ARE SENDING DISMOUNT MSG
MOVE S2,[.OHDRS+1,,.QODSM] ; THEN GET THE DISMOUNT MESSAGE HDR
MOVEM S2,.MSTYP(S1) ;SAVE IT
MOVEI S2,2 ;WE ARE PASSING 2 BLOCKS
MOVEM S2,.OARGC(S1) ;SO SET THE BLOCK COUNT IN THE MSG
IORM P3,.OFLAG(S1) ;LITE ANY FLAG BITS
MOVEI P3,.OHDRS(S1) ;POINT TO THE FIRST MSG BLOCK
JUMPN P2,SNDB.Y ;SKIP REQUEST COUNT STUFF IN MOUNTING
PUSH P,S1 ;SAVE S1
MOVEI S1,(P1) ;GET VOL BLOCK ADDRESS
PUSHJ P,CTNREQ ;GET THE NUMBER OF REQUESTS NEEDING STR
MOVE S2,S1 ;GET COUNT
POP P,S1 ;RESTORE MESSAGE ADDRESS
STORE S2,.OFLAG(S1),.DMNRQ ;SAVE IN MESSAGE
SNDB.Y: MOVE S1,[ARG.DA+.BLDLN,,.BLDSN] ;GET THE BLOCK HEADER
MOVEM S1,ARG.HD(P3) ;SET IT UP
POP P,ARG.DA+.BLDNM(P3) ;INSERT THE ALIAS NAME (STRUCTURE NAME)
SETZM ARG.DA+.BLDOW(P3) ;NO OWNER YET !!!
JUMPE P2,SNDB.X ;DISMOUNT,,THEN SKIP OWNER ID
MOVE S1,.VLNAM(P1) ;MOUNT,,GET STRUCTURE NAME
PUSHJ P,D$FCAT ;GET THE CATALOG ENTRY ADDRESS
JUMPF SNDB.X ;NOT THERE,,OH WELL WE TRIED !!!
MOVE S1,.CTOID(S1) ;GET THE OWNERS ID
MOVEM S1,ARG.DA+.BLDOW(P3) ;SAVE IN MESSAGE
SNDB.X: MOVSI S1,ARG.DA+.BLDLN ;GET THE BLOCK LENGTH
ADDM S1,@G$SAB##+SAB.MS ;ADD TO THE TOTAL MESSAGE LENGTH
MOVEI P3,ARG.DA+.BLDLN(P3) ;POINT TO NEXT MSG BLOCK
MOVE S1,[1,,.BLDUN] ;GET UNIT NAME(S) BLOCK HEADER
MOVEM S1,ARG.HD(P3) ;SAVE IT IN THE MESSAGE
MOVE S1,P1 ;GET THE FIRST (PRI) VOL BLOCK ADDRESS
MOVE P4,P1 ;MAKE THIS THE CURRENT VOLUME
PUSH P,P3 ;SAVE THIS MSG BLOCK ADDRESS
SNDB.1: MOVE S2,.VLUCB(S1) ;GET THE UNIT WE ARE MOUNTED ON.
LOAD TF,.UCBST(S2),UC.WLK ;GET WRITE-LOCKED BIT
IORM TF,WRTLCK ;REMEMBER IT
MOVE S2,.UCBNM(S2) ;GET ITS SIXBIT NAME
MOVEM S2,ARG.DA(P3) ;SAVE IT IN THE MESSAGE
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
MOVE S2,.VLVID(S1) ;GET THE HOME BLOCK ID
MOVEM S2,ARG.DA+1(P3) ;SAVE IT IN THE MESSAGE
MOVEI P3,2(P3) ;POINT TO THE NEXT UNIT ENTRY
SKIPN S1,.VLNXT(S1) ;GET THE NEXT VOLUME NAME
JRST SNDB.3 ;NO MORE,,SEND THE MESSAGE OFF
PUSHJ P,FNDDSK ;FIND IT IN OUR DATA BASE
JUMPE P2,SNDB.2 ;DOING 'DISMOUNT',,SKIP VOL LINK CODE
STORE P4,.VLPTR(S1),VL.PRV ;LINK THE NEXT TO THE LAST
STORE S1,.VLPTR(P4),VL.NXT ;LINK THE LAST TO THE NEXT
SNDB.2: MOVE P4,S1 ;MAKE THIS VOL THE CURRENT VOL BLOCK
JRST SNDB.1 ;AND GO PROCESS THE NEW VOLUME BLK
SNDB.3: POP P,S1 ;RESTORE OLD BLOCK ADDRESS
SUBI P3,0(S1) ;GET THE BLOCK LENGTH
MOVSS P3 ;MOVE RIGHT TO LEFT
ADDM P3,@G$SAB##+SAB.MS ;BUMP TOTAL MESSAGE LENGTH
ADDM P3,ARG.HD(S1) ;AND BUMP THE MSG BLOCK LENGTH
HRRZ S1,G$SAB##+SAB.MS ;GET MESSAGE ADDRESS
MOVX S2,.MTWLK ;GET WRITE-LOCKED FLAG
SKIPE WRTLCK ;WANT TO SET IT?
IORM S2,.OFLAG(S1) ;YES
MOVX S1,PAGSIZ ;GET THE PAGE LENGTH
MOVEM S1,G$SAB##+SAB.LN ;SAVE IT
PUSHJ P,SNDLBR ;SEND THE MSG OFF TO THE TAPE LABELER
$RETT ;AND RETURN
>
SUBTTL ASLMSG - ROUTINE TO BUILD AN 'ADD STRUCTURE' MSG
; DSLMSG - ROUTINE TO BUILD A 'DELETE FROM SEARCH LIST' MSG
;CALL: S1/ The VSL Block Address
; S2/ The VOL Block Address
; AP/ The MDR adrs
;
;RET: TRUE ALWAYS
TOPS10< INTERN D$DSLM ;MAKE IT GLOBAL
ASLMSG: TDZA TF,TF ;NO FLAG BITS IF ENTRY IS HERE
D$DSLM: MOVX TF,ASL.RM+ASL.NRD+ASL.NQ;REMOVE STR + NO RECOMP + NO QTA CHECK
SKIPA ;SKIP NEXT ENTRY POINT
DSLMSG: MOVX TF,ASL.RM ;GET THE 'REMOVE STRUCTURE' FLAG BIT
PUSHJ P,.SAVE2 ;SAVE SOME ACS
DMOVE P1,S1 ;SAVE ARGS
MOVEM TF,TMPVSL+.OFLAG ;SAVE THE ACTION BITS
MOVE TF,[.OHDRS+ARG.DA+.BLDLN,,.QOASL] ;GET MSG LENGTH,,MSG TYPE
MOVEM TF,TMPVSL ;SAVE IT IN THE MESSAGE
SETZM TMPVSL+.MSFLG ;NO FLAG BITS
MOVEI TF,1 ;1 BLOCK
MOVEM TF,TMPVSL+.OARGC ; IN THE MESSAGE
MOVE TF,[.BLDLN+1,,.BLDSN] ;GET THE BLOCK LENGTH,,BLOCK TYPE
MOVEM TF,TMPVSL+.OHDRS+ARG.HD ;SAVE IT IN THE MESSAGE
MOVE TF,.VLNAM(S2) ;GET THE STRUCTURE NAME
MOVEM TF,TMPVSL+.OHDRS+ARG.DA+.BLDNM ;SAVE IT IN THE MESSAGE
LOAD TF,.VSRID(S1),VS.RID ;GET THE USERS REQUEST ID
MOVEM TF,TMPVSL+.MSCOD ;SAVE IT AS THE ACK CODE
MOVE TF,.MRUSR(AP) ;GET THE USERS PPN
MOVEM TF,TMPVSL+.OHDRS+ARG.DA+.BLDOW ;SAVE IT IN THE MESSAGE
LOAD TF,.MRJOB(AP),MD.PJB ;GET THE USERS JOB NUMBER
IOR TF,TMPVSL+.OFLAG ;KEEP THE REMOVAL BIT
MOVE S1,.VSFLG(P1) ;GET THE USERS FLAG BITS FROM THE VSL
TXNE S1,VS.PAS ;WANT TO BE PASSIVE?
TXO TF,ASL.PS ;YES, SAY SO
TXNE S1,VS.NOC ;WANT NO-CREATE?
TXO TF,ASL.NC ;YES, SAY THAT
TXNE S1,VS.WLK ;WANT IT WRITE-LOCKED?
TXO TF,ASL.WL ;SAY THAT
TXNE S1,VS.SIN ;WANT SINGLE ACCESS
TXO TF,ASL.SA ;SAY SO
TXNE S1,VS.ARD ;WANT TO ALWAYS RECONPUTE DISK USAGE?
TXO TF,ASL.AR ;YES
MOVEM TF,TMPVSL+.OFLAG ;SAVE IT IN THE MESSAGE
MOVEI TF,TMPVSL ;GET THE MESSAGE ADDRESS
MOVEM TF,G$SAB##+SAB.MS ;SAVE IT IN THE SAB
LOAD TF,TMPVSL+.MSTYP,MS.CNT ;GET THE MESSAGE LENGTH
MOVEM TF,G$SAB##+SAB.LN ;SAVE IT IN THE SAB
DMOVE S1,P1 ;GET VSL AND VOL BLOCK ADDRESSES
PUSHJ P,AASSET ;SET VL.AAS IF NECESSARY
PUSHJ P,SNDLBR ;SEND THE MESSAGE OFF
$RETT ;RETURN
; Set or clear VL.AAS bit.
; Call: MOVE S1, VSL block address
; MOVE S2, VOL block address
; PUSHJ P,AASSET/ASSCLR
;
AASSET: TDZA TF,TF ;SETTING VL.AAS
AASCLR: MOVEI TF,1 ;CLEARING VL.AAS
PUSHJ P,.SAVE2 ;SAVE SOME ACS
DMOVE P1,S1 ;SAVE VOL BLOCK ADDRESS
LOAD S1,.VLOWN(P2),VL.CNT ;GET REQUESTOR COUNT
MOVNS S1 ;NEGATE IT
HRLI S1,.VLVSL(P2) ;POINT TO FIRST VSL
MOVSS S1 ;BUILD AN AOBJN POINTER
AASX.1: HRRZ S2,(S1) ;GET A VSL ADDRESS
CAME S2,P1 ;FOUND THE VSL?
AOBJN S1,AASX.1 ;LOOP FOR TILL WE FIND A MATCH
JUMPGE S1,.POPJ ;AOBJN POINTER RAN OUT?
MOVE S2,(S1) ;GET FLAGS,,ADDR
SKIPN TF ;ALWAYS CLEAR BIT?
TXNN S2,VL.ASN ;BUT IS IT ASSIGNED?
TXZA S2,VL.AAS ;NO
TXO S2,VL.AAS ;YES - THEN LITE ALREADY ASSIGNED
MOVEM S2,(S1) ;REPLACE FLAGS,,ADDR
POPJ P, ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL GETCAT - ROUTINE TO SEND A REQUEST FOR CATALOG INFO MESSAGE
;CALL: S1/ -1,,Asciz Vol Set Name (Not a User Request)
; S1/ 0,,VSL Address (If a User Request)
;
;RET: True if found, False otherwise
TOPS10<
D$GCAT::
GETCAT: PUSHJ P,.SAVE2 ;SAVE P1 & P2 FOR A MINUTE
SKIPL P1,S1 ;SAVE CALLING PARMS, SKIP IF INTERNAL
HRROI S1,.VSVSN(P1) ;POINT TO THE ASCIZ VOLUME SET NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
MOVE S1,S2 ;MOVE THE VOL SET NAME TO S1
PUSHJ P,D$FCAT ;FIND IT IN OUR CATALOG CACHE
JUMPF GETC.0 ;NOT THERE,,GO REQUEST IT
MOVX S2,%DISK ;GET TYPE 'STRUCTURE'
SKIPL P1 ;SKIP IF AN INTERNAL REQUEST
STORE S2,.VSFLG(P1),VS.TYP ;MARK THIS VOLUME SET
$RETT ;RETURN (WITH CAT ENTRY ADDR IN S1)
;Here to send a catalog request to PULSAR
GETC.0: MOVEI P2,TMPVSL ;GET A TEMP MSG BUFFER
MOVEM P2,G$SAB##+SAB.MS ;SAVE IT IN THE SAB
MOVE S1,[.OHDRS+1,,.QORCT] ;GET THE REQUEST FOR CATALOG INFO HEADER
MOVEM S1,.MSTYP(P2) ;SAVE IT
SETOM S2 ;INDICATE 'NOT A USER' REQUEST
SKIPL P1 ;UNLESS WE POINT TO A VSL
LOAD S2,.VSRID(P1),VS.RID ;THEN GET THE REQUEST ID
MOVEM S2,.MSCOD(P2) ;SAVE THE ACK CODE (RID OR -1)
SETZM .MSFLG(P2) ;NO FLAG WORD
SETZM .OFLAG(P2) ;NO MESSAGE FLAG WORD
MOVEI S1,1 ;GET A BLOCK COUNT OF 1
MOVEM S1,.OARGC(P2) ;SAVE IT
MOVEI P2,.OHDRS(P2) ;POINT TO THE FIRST (ONLY) MSG BLOCK
MOVE S1,[1,,.RCTVS] ;GET VOLUME SET NAME BLOCK HEADER
MOVEM S1,ARG.HD(P2) ;SAVE IT
SETZM S1 ;CLEAR S1 (USE AS BYTE COUNTER)
SKIPL P1 ;IF INTERNAL,,SKIP
MOVEI P1,.VSVSN(P1) ;POINT TO THE VOL SET NAME
HRLI P1,(POINT 7,0) ;MAKE THE VOL SET NAME ADDR A BYTE PTR
MOVE S2,[POINT 7,ARG.DA(P2)] ;GET THE DESTINATION ADDRESS
GETC.1: ILDB TF,P1 ;GET A VOLUME SET NAME BYTE
IDPB TF,S2 ;INSERT IT INTO THE MESSAGE
AOS S1 ;BUMP BYTE COUNT BY 1
JUMPN TF,GETC.1 ;CONTINUE TILL ASCIZ
IDIVI S1,5 ;CALC # OF WORDS USED
SKIPE S2 ;ANY REMAINDER ???
AOS S1 ;YES,,ROUND UP !!
MOVSS S1 ;MOVE RIGHT TO LEFT
ADDM S1,.MSTYP+TMPVSL ;BUMP TOTAL MESSAGE LENGTH
ADDM S1,.OHDRS+ARG.HD+TMPVSL ;BUMP BLOCK LENGTH
LOAD S1,.MSTYP+TMPVSL,MS.CNT ;GET THE MESSAGE LENGTH
MOVEM S1,G$SAB##+SAB.LN ;SAVE IT IN THE SAB
PUSHJ P,SNDLBR ;SEND IT OFF TO THE TAPE LABELER
$RETF ;AND RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL D$BCAT - BLISS INTERFACE TO ROUTINE GETCAT
;CALL: S1/ The Structure Resource Number
;
;RET: S2/ The Catalog Entry Address or STOPCODE
TOPS10<
D$BCAT:: IMULI S1,AMALEN ;CALC THE 'A' MATRIX OFFSET
ADD S1,AMATRX ;POINT TO THE RESOURCE ENTRY
HRRO S1,.AMNAM(S1) ;GET THE STRUCTURE NAME (VOL SET NAME)
$CALL S%SIXB ;CONVERT TO SIXBIT
MOVE S1,S2 ;GET IT AS AN ARGUMENT
PUSHJ P,D$FCAT ;FIND IT IN THE CATALOG
SKIPT ;SKIP IF FOUND...
$STOP(SCE,Structure Catalog Entry is Missing) ;NO,,OH WELL !!!
MOVE S2,S1 ;RETURN THE ADDRESS IN S2 (FOR BLISS)
$RETT ;AND RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL SCNVOL - ROUTINE TO FIND COMMON VOLUMES REQUESTS AND LINK THEM
;CALL S1/ The Volume Name in Sixbit
; S2/ The VSL Address
;
;RET: S1/ The VOL Address
TOPS10 <
SCNVOL: PUSHJ P,.SAVE4 ;SAVE THE P AC'S FOR A MINUTE
STKVAR <LENGTH> ;ALLOCATE SOME STORAGE FOR ENTRY LENGTH
DMOVE P1,S1 ;SAVE THE VOLUME NAME AND VSL ADDRESS
LOAD P3,.VSFLG(P2),VS.TYP ;GET THE VOLUME TYPE
MOVX TF,FALSE ;MAKE FLAG AC FALSE
CAXN P3,%TAPE ;IS IT A TAPE REQUEST ???
PUSHJ P,FNTAPX ;YES,,FIND IT IN OUR DATA BASE
CAXN P3,%DISK ;IS IT A STRUCTURE REQUEST ???
PUSHJ P,FNDISK ;YES,,FIND IT IN OUR DATA BASE
JUMPF .RETF ;NOT THERE,,RETURN NOW
MOVE P1,S1 ;SAVE THE VOL BLOCK ADDRESS
MOVE S1,VOLQUE ;GET THE VOLUME QUEUE ID
PUSHJ P,L%SIZE ;GET THIS ENTRY'S LENGTH
MOVEM S2,LENGTH ;SAVE THE ENTRY LENGTH FOR LATER
SUBI S2,VOLLEN-1 ;GET THE TOTAL .VLVSL BLOCK LENGTH
LOAD S1,.VLOWN(P1),VL.CNT ;GET THE TOTAL ALLOCATED LENGTH
CAIN S1,0(S2) ;ARE THEY EQUAL ???
JRST SCNV.3 ;YES,,WE NEED MORE ROOM !!!
CAIL S1,0(S2) ;IS ALLOCATED MORE THEN TOTAL ???
$STOP (AMT,Allocated is More then Total (VOL .VLVSL BLOCKS))
ADDI S1,.VLVSL(P1) ;GET THE NEXT BLOCK ADDRESS
MOVEM P2,0(S1) ;LINK THE VSL TO THE VOL
INCR .VLOWN(P1),VL.CNT ;BUMP THE REQUEST COUNT BY 1
MOVE S1,P1 ;GET THE VOL ADDRESS IN S1
$RETT ;AND RETURN
SCNV.3: AOS S2,LENGTH ;GET LENGTH+1 IN S2
MOVE S1,VOLQUE ;GET THE VOLUME QUEUE ID
PUSHJ P,L%CENT ;CREATE A NEW VOL ENTRY
HRL TF,P1 ;GET THE OLD VOL ADDRESS
HRR TF,S2 ;GET THE NEW VOL ADDRESS
MOVE S1,LENGTH ;GET THE ENTRY LENGTH
ADDI S1,-2(S2) ;GET VOL ENTRY END ADDRESS -1
BLT TF,0(S1) ;COPY OLD VOL TO NEW VOL
LOAD S1,.VLOWN(S2),VL.CNT ;GET THE REQUEST COUNT
ADDI S1,.VLVSL(S2) ;POINT TO VOL VSL ADDRESS
MOVEM P2,0(S1) ;LINK THE VOL TO THE VSL
MOVE P2,S2 ;GET THE NEW VOL ADDRESS IN P2
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
MOVE S1,VOLQUE ;GET THE VOLUME QUEUE ID
MOVE S2,P1 ;GET THE OLD VOL ADDRESS IN S2
PUSHJ P,L%APOS ;POSITION TO THE OLD ENTRY
PUSHJ P,L%DENT ;DELETE THE OLD ENTRY
;Now that we have deleted the old VOL entry and created a new one,
; we must go back through this volumes VSL chain and
; fixup the VSL's VOL pointer so that it now points to the new VOL
; entry instead of the old one.
LOAD S1,.VLPTR(P2),VL.NXT ;GET THE SECONDARY VOL BLOCK ADDRESS
SKIPE S1 ;NONE THERE,,SKIP
STORE P2,.VLPTR(S1),VL.PRV ;FOUND,,SAVE NEW VOL BLK ADDR AS PRIMARY
LOAD P3,.VLOWN(P2),VL.CNT ;GET THE VSL COUNT FOR THIS VOL ENTRY
MOVEI S1,.VLVSL(P2) ;POINT S1 TO THE VSL ADDRESS LIST
SCNV.4: MOVE S2,0(S1) ;PICK UP A VSL ADDRESS IN S2
LOAD P4,.VSCVL(S2),VS.CNT ;GET THE VOL COUNT FOR THIS VSL IN P4
MOVEI S2,.VSVOL(S2) ;POINT TO THIS VSL'S VOL LIST
SCNV.5: CAMN P1,0(S2) ;WE ARE LOOKING FOR THE OLD VOL PTR
JRST SCNV.6 ;FOUND IT,,CONTINUE ON
AOS S2 ;POINT TO NEXT VOL POINTER
SOJG P4,SCNV.5 ;CONTINUE TILL FOUND
$STOP (VPF,Volume Pointer Not Found) ;NOT THERE,,DEEEEP TROUBLE !!
SCNV.6: MOVEM P2,0(S2) ;LINK VSL TO NEW VOL ENTRY
AOS S1 ;POINT TO NEXT VSL ADDRESS
SOJG P3,SCNV.4 ;CONTINUE THROUGH ALL VSL'S
INCR .VLOWN(P2),VL.CNT ;BUMP THE REQUEST COUNT BY 1 (FOR CURRENT)
SKIPE S1,.VLUCB(P2) ;CHECK AND LOAD THE UCB ADDRESS
MOVEM P2,.UCBVL(S1) ;FOUND IT,,RELINK IT TO THIS VOL ENTRY
MOVE S1,P2 ;RETURN THE VOL POINTER IN S1
$RETT ;AND RETURN
>
TOPS20 <
SCNVOL: $RETF ;RETURNS FALSE ON THE -20
>
SUBTTL UPDSVL - UPDATE THE STARTING VOLUME FOR A VOLUME SET
;CALL: S1/ The Sixbit Volume name or the Volume number
;
;RET: True Always
UPDSVL: TLNE S1,770000 ;IS IT A SIXBIT ID ???
JRST UPDS.2 ;YES,,GO PROCESS IT
CAMLE S1,VOLNBR ;MUST BE LESS OR EQUAL TO VOLUME COUNT
$RETF ;NO,,OFFSET TOO GREAT - THATS AN ERROR
SUBI S1,1 ;MAKE THE COUNT AN OFFSET
STORE S1,.VSCVL(P2),VS.OFF ;AND SET IT IN VSL
$RETT ;RETURN
UPDS.2: LOAD T1,.VSCVL(P2),VS.CNT ;GET THE VOLUME COUNT
MOVNS T1 ;MAKE IT NEGATIVE
HRLZS T1 ;MOVE RIGHT TO LEFT
HRRI T1,.VSVOL(P2) ;POINT TO THE VOLUME LIST
SETZM T2 ;START OFFSET OUT AT 0
UPDS.3: MOVE S2,0(T1) ;GET A VOLUME POINTER
CAMN S1,0(S2) ;DO WE MATCH - VOLUME FOR VOLUME ???
JRST [STORE T2,.VSCVL(P2),VS.OFF ;YES,,SAVE THE VOLUME OFFSET
$RETT ] ;AND RETURN
AOS T2 ;BUMP OFFSET COUNT
AOBJN T1,UPDS.3 ;CONTINUE THROUGH ALL VOLUMES
$RETF ;NOT FOUND,,TOUGH BREAKEEEE
SUBTTL D$INID - Initialization done for tape handler
;This code is executed when the tape labeler send a message saying
; 'done with label initialization' for a particular drive
; This routine clear the UC.INI bit, and arranges to have the labels
; of the drive just freed up read.
TOPS10<
D$INID:: MOVX S1,.RECDV ;GET THE BLOCK TYPE TO LOOK FOR
PUSHJ P,A$FNDB## ;FIND IT
JUMPF MISC.3 ;CAN'T, SO COMPLAIN
MOVE S1,.RECDN(S1) ;GET THE SIXBIT DRIVE NAME
PUSHJ P,UCBFND ;GET THE DRIVE DATA BLOCK
JUMPF MISC.3 ;CAN'T SO COMPLAIN ABOUT THAT
MOVE S2,.UCBST(S1) ;GET THE STATUS BITS
TXZN S2,UC.INI ;DID WE THINK IT WAS INITING?
$RETT ;NO, FORGET THE JUNK MAIL
MOVEM S2,.UCBST(S1) ;SAVE BITS WITHOUT UC.INI
$WTO (<Volume initialization complete>,<Drive is available for use>,MDAOBJ,$WTFLG(WT.SJI))
MOVE S1,.UCBNM(S1) ;GET SIXBIT DRIVE NAME
PJRST SNDREC ;READ THE (NEW) LABELS
;These bits are defined so that flags can be traced from the point
; of lighting to the point of testing among various calls/levels
;Flag used to signify that a user's request has other volumes
; (already) mounted
AF.OVL==1B0
;Flag used to signify that during resource removal, there are no
; other users of a 'high level' shared resource
RF.RSN==RHMASK ;FIELD WHICH HOLDS THE RESOURCE #
RF.OTU==1B0 ;OTHER USERS OF A SHARED DISK DRIVE
> ;END TOPS10 CONDITIONAL
SUBTTL D$ALOC - ROUTINE TO PERFORM DEVICE ALLOCATION
;CALL: S1/ The VSL Address
; AP/ The MDR Address
;
;RET: True if Allocation Wins, False Otherwise
;
; If False is returned then...
;
; S1/ 0 if failed because deadlock detected
; S1/ -1 if failed because allocation deferred
TOPS10<
D$ALOC: PUSHJ P,.SAVE4 ;SAVE P1 - P4
PUSHJ P,.SAVET ;SAVE T1 - T4
LOAD P1,.VSRID(S1),VS.LNK ;GET THE REQUEST LINK CODE
LOAD P2,.MRCNT(AP),MR.CNT ;GET THE VSL REQUEST COUNT
MOVNS P2 ;NEGATE THE COUNT
MOVSS P2 ;MOVE RIGHT TO LEFT
HRRI P2,.MRVSL(AP) ;CREATE VSL SEARCH AOBJN AC
$SAVE <M> ;PRESERVE WHATEVER IS IN M
PUSHJ P,SETSTK ;SETUP THE VSL, RSN STACK
ALOC.1: MOVE P3,0(P2) ;GET A VSL ADDRESS
LOAD S1,.VSRID(P3),VS.LNK ;GET ITS LINK CODE
CAME P1,S1 ;DO WE WANT THIS VSL ???
JRST ALOC.2 ;NO,,SKIP IT
LOAD S1,.VSFLG(P3),VS.WAL ;IS THIS VSL AWATING ALLOCATION ???
JUMPE S1,ALOC.2 ;NO,,THEN SKIP IT
MOVE S1,P3 ;COPY VSL POINTER
PUSHJ P,VSLRSX ;GET ALL THE RSNS ONTO THE M STACK
JUMPF [SETOM S1 ;CAN'T, SO RETURN -1
$RETF ] ;MEANING DEFERRED ALLOCATION
ALOC.2: AOBJN P2,ALOC.1 ;CHECK ALL VSL'S
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here to find the users 'B' matrix entry, and create one if not there
ALOC.3: PUSHJ P,D$BMTX ;FIND THE USERS ENTRY IN THE 'B' MATRIX
JUMPT ALOC.4 ;FOUND IT,,CONTINUE
MOVE S1,BMATRX ;GET THE 'B' MATRIX ID
PUSHJ P,L%LAST ;POSITION TO THE END OF THE 'B' MATRIX
MOVE S1,BMATRX ;GET THE 'B' MATRIX ID
MOVX S2,SMALEN ;GET THE 'B' MATRIX LENGTH
PUSHJ P,L%CENT ;CREATE AN ENTRY FOR THE USER
MOVE BM,S2 ;SAVE THE ENTRY ADDRESS
MOVE S1,CMATRX ;GET THE 'C' MATRIX ID
PUSHJ P,L%LAST ;POSITION TO THE END OF THE 'C' MATRIX
MOVE S1,CMATRX ;GET THE 'C' MATRIX ID
MOVX S2,SMALEN ;GET THE 'C' MATRIX LENGTH
PUSHJ P,L%CENT ;CREATE AN ENTRY FOR THE USER
MOVE CM,S2 ;SAVE THE ENTRY ADDRESS
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE USERS JOB NUMBER
MOVEM S1,.SMJOB(BM) ;SAVE IT IN THE 'B' MATRIX ENTRY
MOVEM S1,.SMJOB(CM) ;SAVE IT IN THE 'C' MATRIX ENTRY
MOVEI S1,1 ;GET MAX RSN OFFSET OF 1
STORE S1,.SMFLG(BM),SM.CNT ;SET IT
STORE S1,.SMFLG(CM),SM.CNT ;HERE ALSO
AOS PROCNT ;BUMP THE PRECESS COUNT BY 1
;Here to create a secondary 'B' Matrix entry for the user which
;will be used in the deadlock avoidance check. The origional is ignored
;until the return from the deadlock routine. If the routine returns
;true, the origional is deleted, if false the secondary is deleted.
ALOC.4: MOVE S1,BMATRX ;GET THE 'B' MATRIX ID
PUSHJ P,L%RENT ;REMEMBER THE ORIGIONAL ENTRY
PUSHJ P,L%SIZE ;GET ITS LENGTH
MOVE P3,S2 ;SAVE IT FOR A SECOND
PUSHJ P,L%CENT ;CREATE A NEW ENTRY
MOVE P2,S2 ;SAVE ITS ADDRESS FOR A SECOND
ADDI P3,0(S2) ;CALC ENTRY END ADDRESS
HRL S2,BM ;GET SOURCE,,DESTINATION FOR BLT
BLT S2,-1(P3) ;COPY OLD ENTRY TO NEW ENTRY
MOVX S1,SM.IGN ;GET THE 'IGNORE' BIT
IORM S1,.SMFLG(BM) ;LITE IT FOR THE OLD ENTRY
MOVE BM,P2 ;POINT TO NEW ENTRY
ALO.4A: MOVE T4,[IOWD MSGLN##,G$MSG] ;GET A QUEUE FOR VSL ADDRESSES
PUSH T4,[-1] ;SET END OF QUEUE INDICATOR
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here to perform the actual device allocation ('B' Matrix Update)
ALOC.5: POP M,S1 ;GET A RSN OFF THE Q
POP M,P2 ;GET THE VSL ADDRESS OFF THE QUEUE
CAMN P2,[-1] ;ARE WE DONE ???
JRST ALOC.8 ;YES,,GO FINISH UP
PUSH T4,P2 ;QUEUE UP THE VSL ADDRESS
LOAD S1,S1,RF.RSN ;EXTRACT JUST THE RSN
MOVE S2,P2 ;LOAD UP THE VSL ADDRESS
PUSHJ P,ADDBMA ;YES,,UPDATE THE RESOURCE COUNT
JRST ALOC.5 ; AND GO PROCESS THE NEXT VSL
;Here to perform Deadlock Avoidance Check
ALOC.8: PUSHJ P,DEADLK ;CALL BLISS INTERFACE ROUTINE
JUMPT ALOC.A ;WIN,,CONTINUE ON !!!
;Here if Deadlock check fails, delete all current VSL's
ALOC.9: POP T4,S1 ;GET A VSL ADDRESS
PUSHJ P,SHUFFL ;SHUFFEL THIS GUYS ALLOCATION AROUND
JUMPT ALOC.A ;WIN,,IT SURE IS HARD BEING NICE !!!
MOVE S1,BMATRX ;GET THE 'B' MATRIX ID
MOVE S2,BM ;GET THE USERS CURRENT MATRIX ENTRY
PUSHJ P,L%APOS ;POSITION TO IT
PUSHJ P,L%DENT ;DELETE IT
MOVE S1,BMATRX ;GET THE 'B' MATRIX ID
PUSHJ P,L%PREM ;POSITION TO THE OLD ENTRY
ZERO .SMFLG(S2),SM.IGN ;CLEAR THE 'IGNORE' BIT
$TEXT(<-1,,G$MSG>,<Volume set allocation failed - insufficient resources available^M^J^0>)
SETOM ERRACK ;THIS IS AN ERROR ACK
PUSHJ P,USRNOT ;TELL THE USER
SETZM S1 ;RETURN ALLOCATION FAILED ERROR CODE
$RETF ;RETURN NO GOOD !!!
;Here if the Deadlock Check Wins
ALOC.A: MOVE S1,BMATRX ;GET THE 'B' MATRIX ID
PUSHJ P,L%PREM ;GET THE OLD USER ENTRY
PUSHJ P,L%DENT ;DELETE IT
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here to clear 'Waiting for Allocation' bits in the VSL's
ALOC.B: POP T4,S1 ;GET THE VSL ADDRESS OFF THE QUEUE
CAMN S1,[-1] ;END OF THE QUEUE ???
JRST ALO.B0 ;YES,,FINISH UP !!!
ZERO .VSFLG(S1),VS.WAL ;NO,,CLEAR THIS VSL'S WAITING BIT
JRST ALOC.B ;AND GO GET ANOTHER
ALO.B0: LOAD S1,.MRJOB(AP),MD.PJB ;GET THE USERS JOB NUMBER
TXNN S1,BA%JOB ;IS IT AN INTERNAL REQUEST ???
PJRST USRACK ;NO,,RETURN ACKING THE USER
INCR .MRCNT(AP),MR.LNK ;YES,,GEN A NEW LINK CODE
LOAD P2,.MRCNT(AP),MR.LNK ;AND LOAD IT
LOAD P1,.MRCNT(AP),MR.CNT ;GET THE REQUEST NUMBER
MOVNS P1 ;NEGATE IT
MOVSS P1 ;MOVE RIGHT TO LEFT
HRRI P1,.MRVSL(AP) ;CREATE VSL SEARCH AOBJN AC
ALO.B1: MOVE S1,0(P1) ;GET A VSL ADDRESS
LOAD S2,.VSFLG(S1),VS.ALC ;JUST ALLOCATING ???
SKIPN S2 ;YES,,SKIP THIS
STORE P2,.VSRID(S1),VS.LNK ;NO,,LINK THIS VSL TO ALL OTHER MOUNTS
AOBJN P1,ALO.B1 ;LOOK AT ALL VSL'S
$RETT ;AND RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL D$BMTX - ROUTINE TO FIND A USERS ENTRY IN THE 'B' MATRIX
; D$CMTX - "" "" "" " "" "" "" "" 'C' ""
;CALL: AP/ The Users MDR Address
;
;RET: BM/ The 'B' Matrix Entry Address if using D$BMTX entry point
; CM/ The 'C' Matrix Entry Address if using D$CMTX entry point
TOPS10<
D$BMTX: SKIPA S1,BMATRX ;SKIP AND LOAD THE 'B' MATRIX ID
D$CMTX: MOVE S1,CMATRX ;LOAD THE 'C' MATRIX ID
PUSHJ P,.SAVE2 ;SAVE P1 & P2 FOR A SECOND
LOAD P1,.MRJOB(AP),MD.PJB ;GET THE USERS JOB NUMBER
MOVX P2,SM.IGN ;GET 'IGNORE ENTRY' FLAG BIT
PUSHJ P,L%FIRST ;GET THE FIRST ENTRY
SKIPA ;SKIP THE FIRST TIME THROUGH
BMTX.1: PUSHJ P,L%NEXT ;GET THE NEXT ENTRY
JUMPF .RETF ;NOT THERE,,RETURN NOT FOUND
CAMN P1,.SMJOB(S2) ;IS THIS THE ONE WE WANT ???
TDNE P2,.SMFLG(S2) ;YES, 'IGNORE THIS ONE' ???
JRST BMTX.1 ;NOT OURS OR IGNORED,,TRY NEXT
CAMN S1,BMATRX ;WAS THIS A 'B' MATRIX SEARCH ???
MOVE BM,S2 ;YES,,GET THE ENTRY ADDRESS IN BM
CAMN S1,CMATRX ;WAS THIS A 'C' MATRIX SEARCH ???
MOVE CM,S2 ;YES,,GET THE ENTRY ADDRESS IN CM
$RETT ;AND RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL DEADLK - BLISS INTERFACE ROUTINE FOR DEADLOCK AVOIDANCE ROUTINE
;CALL: AMATRX/ The 'A' Matrix Address
; BMATRX/ The 'B' Matrix Link List ID
; CMATRX/ The 'C' Matrix Link List ID
;
;RET: True Or False depending on the Deadlock Avoidance check
TOPS10<
D$DLOK:: ;MAKE IT GLOBAL
DEADLK: SKIPN G$DEAD## ;DEADLOCK AVOIDANCE CHECKING ENABLED ??
$RETT ;NO,,ALWAYS WIN !!!
$COUNT (DEAD) ;COUNT NUMBER OF DEADLOCK CHECKS
PUSH P,AMATRX ;PARM #1 AMATRX
PUSH P,BMATRX ;PARM #2 BMATRX
PUSH P,CMATRX ;PARM #3 CMATRX
MOVE S1,AMATRX ;GET THE AMATRX ADDRESS
LOAD S1,.AMHDR(S1),AM.CNT ;GET THE TOTAL RESOURCE COUNT
PUSH P,S1 ;PARM #4 RESOURCE COUNT
PUSH P,PROCNT ;PARM #5 MATRIX PROCESS COUNT
PUSHJ P,D$DEAD## ;PERFORM DEADLOCK AVOIDANCE
SUB P,[5,,5] ;DELETE THE PARM LIST
$RETIT ;return if ok
$COUNT (DFAL) ;count up the deadlock failures
$RET ;PASS FAILURE ON BACK
> ;END TOPS10 CONDITIONAL
SUBTTL D$DLCK - ROUTINE TO SET UP THE DEADLOCK AVOIDANCE CHECK
;CALL: S1/ The VSL Address
; AP/ The MDR Address
;
;RET: True if Allocation Wins, False Otherwise
TOPS10<
D$DLCK: PUSHJ P,.SAVE4 ;SAVE P1 - P4
PUSHJ P,.SAVET ;SAVE T1 - T4
MOVEM S1,SAVVSL ;SAVE THE VSL FOR RETRIES
DLCK.A: LOAD P1,.VSRID(S1),VS.LNK ;GET THE REQUEST LINK CODE
LOAD P2,.MRCNT(AP),MR.CNT ;GET THE VSL REQUEST COUNT
MOVNS P2 ;NEGATE THE COUNT
MOVSS P2 ;MOVE RIGHT TO LEFT
HRRI P2,.MRVSL(AP) ;CREATE VSL SEARCH AOBJN AC
SETZM P4 ;CLEAR THE DEADLOCK CHECK FLAG
$SAVE <M> ;PRESERVE WHATEVER IS IN M
PUSHJ P,SETSTK ;SETUP THE VSL, RSN STACK
MOVE T4,[IOWD MSGLN##,G$MSG] ;GET A QUEUE FOR VSL ADDRESSES
PUSH T4,[-1] ;INDICATE 'END OF QUEUE'
DLCK.1: MOVE P3,0(P2) ;GET A VSL ADDRESS
LOAD S1,.VSRID(P3),VS.LNK ;GET ITS LINK CODE
MOVX S2,VS.CLM ;GET THE 'RESOURCES CLAIMED' STATUS BIT
CAMN P1,S1 ;DO WE WANT THIS VSL ???
TDNE S2,.VSFLG(P3) ; AND IS HAS IT BEEN CLAIMED YET ???
JRST DLCK.3 ;WRONG VSL OR CLAIMED,,SKIP IT
MOVE S1,P3 ;COPY THE VSL ADRS
PUSHJ P,VSLRSN ;EXTRACT ALL RSNS FOR THIS VSL
SETOM P4 ;SET THE DEADLOCK CHECK FLAG
PUSH T4,P3 ;QUEUE UP THE VSL ADDRESS
DLCK.3: AOBJN P2,DLCK.1 ;CHECK ALL VSL'S
JUMPE P4,.RETT ;NOTHING TO DO, SO RETURN NOW!
;Here to find the users 'C' matrix entry
PUSHJ P,D$CMTX ;LOCATE THE USERS 'C' MATRIX ENTRY
SKIPT ;IT MUST BE THERE !!!
$STOP(CME,'C' Matrix Entry is Missing)
;Here to perform 'A' & 'C' Matrix Updates
;First, Create a duplicate 'A' matrix
MOVE P4,AMATRX ;GET THE OLD 'A' MATRIX ADDRESS
LOAD S1,.AMHDR(P4),AM.LEN ;GET THE MATRIX LENGTH
PUSHJ P,M%GMEM ;GET A NEW' 'A' MATRIX
MOVEM S2,AMATRX ;SAVE THE ADDRESS OF THE NEW MATRIX
ADDI S1,0(S2) ;CALC THE MATRIX END ADDRESS
HRL S2,P4 ;GET SOURCE,,DEST FOR BLT
BLT S2,-1(S1) ;COPY OLD 'A' MATRIX TO NEW 'A' MATRIX
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Then, Create a duplicate 'C' matrix entry
MOVE S1,CMATRX ;GET THE 'C' MATRIX ID
PUSHJ P,L%RENT ;REMEMBER THE ORIGIONAL ENTRY
PUSHJ P,L%SIZE ;GET ITS LENGTH
MOVE P3,S2 ;SAVE IT FOR A SECOND
PUSHJ P,L%CENT ;CREATE A NEW ENTRY
MOVE P2,S2 ;SAVE ITS ADDRESS FOR A SECOND
ADDI P3,0(S2) ;CALC ENTRY END ADDRESS
HRL S2,CM ;GET SOURCE,,DESTINATION FOR BLT
BLT S2,-1(P3) ;COPY OLD ENTRY TO NEW ENTRY
MOVX S1,SM.IGN ;GET THE 'IGNORE' BIT
IORM S1,.SMFLG(CM) ;LITE IT FOR THE OLD ENTRY
MOVE CM,P2 ;POINT TO NEW ENTRY
;Here to Update the 'A' and 'C' matricies
DLCK.4: POP M,P1 ;GET A RSN OFF THE QUEUE
POP M,P3 ;GET THE VSL ADDRESS OFF THE QUEUE
CAMN P1,[-1] ;END OF THE QUEUE ???
JRST DLCK.5 ;YES,,LETERRIP !!!
LOAD S1,P1,RF.RSN ;GET JUST THE RESOURCE NUMBER
MOVE S2,P3 ;AIM AT THE VSL
PUSHJ P,ADDCMA ;UPDATE THE 'C' MATRIX
LOAD S1,P1,RF.RSN ;GET JUST THE RESOURCE NUMBER
MOVE S2,P3 ;AIM AT THE VSL
TXNN P1,RF.OTU ;IF OTHER USERS, DON'T TAKE OUT DRIVES
PUSHJ P,ADDAMA ;UPDATE THE 'A' MATRIX
JUMPT DLCK.4 ;WIN,,CONTINUE
JRST DLCK.7 ;NO GOOD,,RETURN AN ERROR
;Here to invoke the Deadlock Avoidance Routine
DLCK.5: PUSHJ P,DEADLK ;LETERRIP !!!
JUMPF DLCK.7 ;NO GOOD,,FINISH UP !!!
;Deadlock Check Wins,,delete the old 'A' Matrix and 'C' Matrix
;Also Update the VS.CLM status bit for the VSL'S involved
LOAD S1,.AMHDR(P4),AM.LEN ;GET THE OLD 'A' MATRIX LENGTH
MOVE S2,P4 ;GET THE OLD 'A' MATRIX ADDRESS
PUSHJ P,M%RMEM ;RETURN IT TO THE MEMORY MANAGER
MOVE S1,CMATRX ;GET THE 'C' MATRIX ID
PUSHJ P,L%PREM ;POSITION TO THE OLD ENTRY
PUSHJ P,L%DENT ;AND DELETE IT
MOVX S2,VS.CLM ;GET THE 'RESOURCES CLAIMED' STATUS BIT
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
DLC.5B: POP T4,S1 ;GET A VSL ADDRESS OFF THE QUEUE
CAMN S1,[-1] ;END OF QUEUE ???
$RETT ;YES,,RETURN OK...
IORM S2,.VSFLG(S1) ;LITE THE RESOURCES CLAIMED STATUS BIT
JRST DLC.5B ;AND GO TRY AGAIN
;Here if an error occurs,,delete the new 'A' and 'C' Matricies
DLCK.7: MOVE S2,AMATRX ;GET THE NEW 'A' AMATRX ADDRESS
MOVEM P4,AMATRX ;RESTORE THE OLD 'A' MATRIX ADDRESS
LOAD S1,.AMHDR(S2),AM.LEN ;GET THE OLD 'A' MATRIX LENGTH
PUSHJ P,M%RMEM ;RETURN IT TO THE MEMORY MANAGER
MOVE S1,CMATRX ;GET THE 'C' MATRIX ID
MOVE S2,CM ;GET THE 'C' MATRIX ENTRY
PUSHJ P,L%APOS ;POSITION TO THE ENTRY
PUSHJ P,L%DENT ;AND DELETE IT
MOVE S1,CMATRX ;GET THE 'C' MATRIX ENTRY
PUSHJ P,L%PREM ;POSITION TO THE OLD 'C' ENTRY
ZERO .SMFLG(S2),SM.IGN ;CLEAR THE IGNORE BIT
MOVE S1,SAVVSL ;GET THE VSL ADDRESS
PUSHJ P,SHUFFL ;SHUFFLE THE RESOURCES AROUND
JUMPF .RETF ;NO GOOD SHUFFLING
JRST DLCK.A ;TRY AGAIN WITH NEW RESOURCES
SAVVSL: BLOCK 1 ;PLACE TO SAVE A VSL
> ;END TOPS10 CONDITIONAL
SUBTTL RETA%C - ROUTINE TO RETURN RESOURCES TO THE 'A' & 'C' MATRICIES
;CALL: S1/ The VSL Being Returned
;
;RET: True Always
TOPS10<
RETA%C: LOAD TF,.VSFLG(S1),VS.CLM ;HAS THIS VSL CLAIMED ITS RESOURCES ???
JUMPE TF,.RETT ;NO,,NOTHING TO RETURN
PUSHJ P,.SAVE4 ;SAVE P1 - P4 FOR A SECOND
MOVE P2,S1 ;SAVE THE VSL ADDRESS
PUSHJ P,D$CMTX ;GET THE USERS 'C' MATRIX ADDRESS
SKIPT ;IT ALSO MUST BE THERE !!!
PUSHJ P,S..CME ;NO,,UH OH !!!
$SAVE <M> ;PRESERVE WHATEVER IS IN M
PUSHJ P,SETSTK ;SETUP THE VSL, RSN STACK
MOVE S1,P2 ;GET BACK VSL ADRS
PUSHJ P,VSLRSN ;GO GET THIS VSL'S RESOURCE NUMBERS
ZERO .VSFLG(P2),VS.CLM ;CLEAR RESOURCE CLAIMED STATUS BIT
RETA.1: POP M,P1 ;GET BACK RSN
POP M,0(M) ;THROW OUT VSL (COPY OF P2)
CAMN P1,[-1] ;TOP OF STACK?
$RETT ;YES, ALL DONE
LOAD S1,P1,RF.RSN ;GET THE RSN IN S1
MOVE S2,P2 ;GET THE VSL ADDRESS IN S2
PUSHJ P,SUBCMA ;RETURN THE 'C' MATRIX RESOURCE
TXNN P1,RF.OTU ;ARE THERE OTHER USERS?
PUSHJ P,SUBAMA ;NO, RETURN THE 'A' MATRIX RESOURCE
SKIPT ;'A' MATRIX NEGATIVE,,THATS ALL FOLKS !!
$STOP (NAM,Negative 'A' Matrix Entry Computed) ;CNT CAN'T BE NEGATIVE
JRST RETA.1 ;PROCESS THE NEXT VSL
> ;END TOPS10 CONDITIONAL
SUBTTL RETBMA - ROUTINE TO RETURN RESOURCES TO THE 'B' MATRIX
;CALL: S1/ The VSL Being Returned
;
;RET: True Always
TOPS10<
RETBMA: PUSHJ P,.SAVE4 ;SAVE P1 - P4 FOR A SECOND
MOVE P2,S1 ;SAVE THE VSL ADDRESS
PUSHJ P,D$BMTX ;GET THE USERS 'B' MATRIX ADDRESS
SKIPT ;IT ALSO MUST BE THERE !!!
$STOP (BME,'B' Matrix Entry is Missing)
$SAVE <M> ;PRESERVE WHATEVER IS IN M
PUSHJ P,SETSTK ;SETUP THE VSL, RSN STACK
MOVE S1,P2 ;RESTORE THE VSL ADDRESS
PUSHJ P,VSLRSX ;GO GET THIS VSL'S RESOURCE NUMBERS
RETB.1: POP M,P1 ;GET BACK RSN AND FLAGS
POP M,0(M) ;THROW OUT VSL ADRS (HAVE IN P2)
CAMN P1,[-1] ;TOP OF STACK?
$RETT ;YES, ALL DONE!
LOAD S1,P1,RF.RSN ;GET RESOURCE NUMBER IN S1
MOVE S2,P2 ;GET THE VSL ADDRESS IN S2
PUSHJ P,SUBBMA ;RETURN THE 'B' MATRIX RSN
JRST RETB.1 ;TRY THE NEXT ONE
> ;END TOPS10 CONDITIONAL
SUBTTL ADDBMA - ROUTINE TO UPDATE A RESOURCE NUMBER FOR A USER
; ADDCMA - "" "" "" " "" "" "" " ""
;CALL: S1/ The Resource Number
; S2/ The VSL Address
; BM or CM/ The Matrix entry address
TOPS10<
ADDBMA: PUSHJ P,.SAVE3 ;SAVE P1 - P3
MOVE P2,BM ;GET THE ENTRY ADDRESS
MOVE P3,BMATRX ;GET THE 'B' MATRIX ID
JRST UPDR.1 ;MEET AT THE PASS !!!
ADDCMA: PUSHJ P,.SAVE3 ;SAVE P1 - P3
MOVE P2,CM ;GET THE ENTRY ADDRESS
MOVE P3,CMATRX ;GET THE 'C' MATRIX ID
UPDR.1: PUSHJ P,GETADD ;GET ADDITIVE (S1 = RSN, S2 = VSL)
UPDR.3: $SAVE <S1,S2> ;SAVE THE RSN AND COUNT
LOAD P1,.SMFLG(P2),SM.CNT ;GET HIS RSN COUNT
CAIG S1,0(P1) ;DOES HE HAVE THIS RESOURCE YET ???
JRST UPDR.4 ;YES,,JUST BUMP THE COUNT
;Here to add space to the users 'B' matrix entry for the new RSN
PUSH P,S1 ;SAVE THE RSN
PUSH P,S2 ;SAVE THE COUNT
STORE S1,.SMFLG(P2),SM.CNT ;SAVE THE NEW MAX RSN OFFSET
SUB S1,P1 ;CALC NEEDED SPACE FOR NEW RSN
MOVE P1,S1 ;SAVE IT HERE
MOVE S1,P3 ;GET THE MATRIX ID
MOVE S2,P2 ;GET THE ENTRY ADDRESS
PUSHJ P,L%APOS ;POSITION TO IT
PUSHJ P,L%SIZE ;GET THE ENTRY LENGTH
PUSH P,S2 ;SAVE THE CURRENT LENGTH
ADD S2,P1 ;EXTEND IT BY CORRECT AMOUNT
PUSHJ P,L%CENT ;CREATE A NEW ENTRY FOR THE USER
POP P,S1 ;RESTORE THE OLD LENGTH
ADD S1,S2 ;CALC BLT END ADDRESS
MOVE P1,S2 ;GET 0,,DESTINATION
HRL P1,P2 ;GET SOURCE,,DESTINATION FOR BLT
BLT P1,-1(S1) ;COPY OLD TO NEW
EXCH P2,S2 ;GET NEW ENTRY ADDR IN P2, OLD IN S2
MOVE S1,P3 ;GET THE MATRIX ID
PUSHJ P,L%APOS ;POSITION TO THE OLD ENTRY
PUSHJ P,L%DENT ;DELETE IT
CAMN P3,BMATRX ;IS THIS THE 'B' MATRIX ???
MOVE BM,P2 ;YES,,SAVE THE NEW ENTRY ADDRESS
CAMN P3,CMATRX ;IS THIS THE 'C' MATRIX ???
MOVE CM,P2 ;YES,,SAVE THE NEW ENTRY ADDRESS
POP P,S2 ;RESTORE THE COUNT
POP P,S1 ;RESTORE THE RSN OFFSET
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here to just update the RSN claim count for a user
UPDR.4: ADDI S1,.SMRES(P2) ;CALC RSN ENTRY ADDRESS
ADDM S2,0(S1) ;UPDATE THE MATRIX
CAME P2,BM ;ARE WE UPDATING THE 'B' MATRIX ???
$RETT ;NO,,RETURN
SUBI S1,.SMRES(P2) ;YES,,GET THE RSN BACK
IMULI S1,AMALEN ;GET THE 'A' MATRIX ENTRY OFFSET
ADD S1,AMATRX ;GET THE ENTRY ADDRESS
INCR .AMCNT(S1),AM.ALO ;BUMP THE RSN ALLOCATION COUNT
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL SUBCMA - ROUTINE TO RETURN RESOURCES TO THE 'C' MATRIX
;CALL: S1/ The RSN
; S2/ The VSL Address
;
;RET: True Always or not at all
TOPS10<
SUBCMA: $SAVE <S1,S2> ;SAVE S1 & S2 ACROSS THE CALL
PUSH P,S2 ;SAVE THE VSL ADDRESS FOR A SECOND
LOAD S2,.SMFLG(CM),SM.CNT ;GET THE RSN COUNT
CAIGE S2,0(S1) ;RESOURCE NUMBER MUST BE IN RANGE
$STOP (RMC,Resource Number Missing in 'C' Matrix)
POP P,S2 ;RESTORE THE VSL ADDRESS
PUSHJ P,GETSUB ;CALC SUBTRACT QUANTITY
ADDI S1,.SMRES(CM) ;POINT TO THE RSN ENTRY
ADDM S2,0(S1) ;UPDATE THE MATRIX
SKIPGE 0(S1) ;IF STILL VALID,,SKIP
$STOP (NCM,Negative 'C' Matrix Entry Computed) ;CNT CAN'T BE NEGATIVE
$RETT ;RETURN
SUBTTL SUBBMA - ROUTINE TO RETURN 'B' MATRIX RESOURCES
;CALL: S1/ The RSN
; S2/ The VSL Address
;
;RET: True Always or not at all
SUBBMA: $SAVE <S1,S2> ;SAVE S1 & S2 ACROSS THE CALL
PUSH P,S2 ;SAVE THE VSL ADDRESS FOR A SECOND
LOAD S2,.SMFLG(BM),SM.CNT ;GET THE RSN COUNT
CAIGE S2,0(S1) ;RESOURCE NUMBER MUST BE IN RANGE
$STOP (RMB,Resource Number Missing in 'B' Matrix)
POP P,S2 ;RESTORE THE VSL ADDRESS
PUSHJ P,GETSUB ;GET THE SUBTRACT QUANTITY
ADDI S1,.SMRES(BM) ;POINT TO THE RSN ENTRY
ADDM S2,0(S1) ;UPDATE THE MATRIX
SKIPGE 0(S1) ;SKIP IF STILL VALID
$STOP (NBM,Negative 'B' Matrix Entry Computed) ;CNT CAN'T BE NEGATIVE
SUBI S1,.SMRES(BM) ;YES,,GET THE RSN BACK
IMULI S1,AMALEN ;GET THE 'A' MATRIX ENTRY OFFSET
ADD S1,AMATRX ;GET THE ENTRY ADDRESS
DECR .AMCNT(S1),AM.ALO ;REDUCE THE RSN ALLOCATION COUNT
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL ADDAMA - ROUTINE TO REMOVE 'A' MATRIX RESOURCES
; SUBAMA - ROUTINE TO RETURN 'A' MATRIX RESOURCES
; D$INCA - ROUTINE TO ADD 1 TO THE RESOURCE COUNT
; D$DECA - ROUTINE TO SUBTRACT 1 FROM THE RESOURCE COUNT
;CALL: S1/ The RSN to be Updated (if ADDAMA or SUBAMA)
; S2/ The VSL Address
;
; S1/ The UCB Address (if D$INCA or D$DECA)
;
;RET: False iff the Matrix Count goes Negative
TOPS10<
ADDAMA: TDZA TF,TF ;FLAG ADD ENTRY POINT
SUBAMA: MOVEI TF,1 ;FLAG SUBTRACT ENTRY POINT
$SAVE <S1,S2,T1> ;SAVE S1 & S2 ACROSS THE CALL
MOVE T1,TF ;GET ENTRY POINT TYPE
XCT [PUSHJ P,GETADD
PUSHJ P,GETSUB](T1) ;GET ADD/SUBTRACT QUANTITY
SETZM T1 ;INDICATE CLAIM ADJUSTMENT
PUSHJ P,ADJAMA ;UPDATE THE MATRIX FOR THIS RSN
JUMPF .RETF ;OVER QUOTA,,RETURN NOW
$RETT ;ELSE RETURN OK
D$INCA: SKIPA S2,[-1] ;GET RSN COUNT OF -1 AND SKIP
D$DECA: MOVEI S2,1 ;GET RSN COUNT OF 1
$SAVE <T1> ;SAVE T1
SETOM T1 ;INDICATE NO CLAIM ADJUSTMENT
LOAD S1,.UCBST(S1),UC.RSN ;GET THE CURRENT RSN
PUSHJ P,ADJAMA ;UPDATE THE MATRIX FOR THIS RSN
JUMPF .RETF ;OVER QUOTA,,RETURN NOW
$RETT ;ELSE RETURN OK
SUBTTL ADJAMA - ROUTINE TO ADJUST THE 'A' MATRIX
;CALL: S1/ The RSN
; S2/ The count
; T1/ 0 if claim adjustment wanted, -1 if not
;
;RET: True if OK, False if over quota
ADJAMA: IMULI S1,AMALEN ;GET THE ENTRY OFFSET
ADD S1,AMATRX ;POINT TO THE ENTRY
JUMPN T1,ADJA.1 ;NO CLAIM ADJUSTMENT,,SKIP THIS
LOAD TF,.AMCNT(S1),AM.CLM ;GET THE NUMBER CLAIMED
ADDM S2,TF ;ADD/SUBTRACT 1
STORE TF,.AMCNT(S1),AM.CLM ;AND SAVE THE RESULT
ADJA.1: LOAD TF,.AMCNT(S1),AM.AVA ;GET THE AVAILABLE COUNT
MOVNS S2 ;REVERSE THE PROCESS
ADDM S2,TF ;ADD/SUBTRACT 1
STORE TF,.AMCNT(S1),AM.AVA ;AND SAVE THE RESULT
TXNE TF,SGNBIT ;IF FIELD SIGN BIT IS ON,, THEN
$RETF ; COUNT IS NEGATIVE SO RETURN FALSE
$RETT ;ELSE RETURN OK
> ;END TOPS10 CONDITIONAL
SUBTTL VSLRSN - ROUTINE TO FIND A VSL'S RESOURCE NUMBERS
;CALL: S1/ The VSL Address
; M/ Stack pointer to RSN Queue
;
;RET: FALSE if the disk VSL is not in the system catalog
; TRUE with the VSL & RSN pairs queued up
TOPS10<
VSLRSN: TDZA TF,TF ;INDICATE NORMAL ENTRY POINT
VSLRSX: SETOM TF ;INDICATE EXTENDED ENTRY POINT
PUSHJ P,.SAVE4 ;SAVE P1 - P4
MOVE P1,S1 ;SAVE VSL ADRS
MOVE P2,TF ;SAVE THE ENTRY POINT INDICATOR
LOAD S1,.VSFLG(S1),VS.TYP ;GET TYPE OF VOLUME SET
CAXE S1,%DISK ;IS THIS A STRUCTURE REQUEST ???
JRST VSLR.2 ;NO, SEE WHAT ELSE
;Here to queue up allocation for a disk VSL
HRROI S1,.VSVSN(P1) ;POINT TO THE ASCIZ VOL SET NAME
PUSHJ P,S%SIXB ;CONVERT IT TO SIXBIT
MOVE S1,S2 ;MOVE IT TO S1
PUSH P,S1 ;SAVE STR NAME A SECOND
PUSHJ P,D$SRSN ;GET THE STRUCTURE RESOURCE NUMBER
POP P,TF ;GET BACK STR NAME
PUSH M,P1 ;QUEUE UP THE VSL ADDRESS
PUSH M,S1 ;QUEUE UP THE RESOURCE NUMBER
IMULI S1,AMALEN ;MAKE A MATRIX INDEX
ADD S1,AMATRX ;AIM AT CURRENT SLOT
LOAD S1,.AMNAM(S1),AM.PRR ;GET THE PERMANENT STR BIT FOR THIS STR
JUMPN S1,.RETT ;IF PERMANENT STR, DON'T ADD DEVICES
MOVE S1,TF ;GET BACK STR NAME
PUSHJ P,D$FCAT ;REQUEST THE CATALOG ENTRY
JUMPF .POPJ ;NOT THERE,,IGNORE ALLOCATION FOR NOW
MOVE P2,S1 ;SAVE CATALOG ADRS
LOAD S1,.CTVSN(P2) ;GET VOLUME SET NAME
PUSHJ P,D$FNDV ;FIND THE PRIMARY VOL BLOCK
PUSHJ P,D$VOWN ;FIND THE OWNER
SETZ S1, ;ASSUME NO OTHER USERS
SKIPF ;ASSUMPTION TRUE?
MOVX S1,RF.OTU ;NO, INDICATE OTHER USERS
EXCH S1,P2 ;SAVE FLAG BIT, GET BACK STR NAME
LOAD P3,.CTCNT(S1) ;GET NUMBER OF DRIVES UNDER THIS STR
MOVEI P4,.CTVOL(S1) ;AIM AT DEVICE LIST PORTION
VSLR.1: MOVE S1,.CTRSN(P4) ;GET THIS RESOURCE NUMBER
PUSH M,P1 ;QUEUE UP THE VSL ADDRESS
IOR S1,P2 ;LITE (PERHAPS) THE OTHER USER BIT
PUSH M,S1 ;QUEUE UP THE CATALOG ENTRY ADDRESS
ADDI P4,CATBLN ;STEP TO NEXT DRIVE
SOJG P3,VSLR.1 ;DO 'EM ALL
$RETT ;DONE,,RETURN
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;Here to queue up allocation for a tape VSL
;If the Extended entry point was used, we will also queue up
;the volume RSN's for all the volumes in the volume set.
VSLR.2: CAXE S1,%TAPE ;IS IT A TAPE VSL?
$RETF ;NO, WE DON'T KNOW HOW TO DO ALLOCATION
LOAD S1,.VSATR(P1),VS.RSN ;GET THE REQUESTED DEVICE TYPE
SKIPN S1 ;CAN'T BE ZERO !!!
$STOP (ITR,Invalid Tape Resource Number Returned)
PUSH M,P1 ;QUEUE UP THE VSL
PUSH M,S1 ;QUEUE UP THE DEVICE REQUIREMENTS
JUMPN P2,VSLR.3 ;EXTENDED ENTRY,,QUEUE ALL VOL RSN'S
;Queue the VSL's current volume RSN
MOVX S1,VS.ABO+VS.VSW ;GET ABORTED BY OPR + VOL SWITCH BITS
TDNE S1,.VSFLG(P1) ;EITHER BIT ON ???
$RETT ;YES,,DON'T QUEUE UP THE VOL RSN
LOAD S1,.VSCVL(P1),VS.OFF ;GET OFFSET TO CURRENT VOLUME
ADDI S1,.VSVOL(P1) ;POINT TO THE CURRENT VOL ADDRESS
MOVE S1,0(S1) ;GET THE VOL ADDRESS
SKIPN .VLNAM(S1) ;ANY VOLID SPECIFIED ???
$RETT ;NO,,DON'T QUEUE ANYTHING UP !!!
PUSHJ P,D$TVRS ;YES,,GET THE VOLUME RSN
PUSH M,P1 ;QUEUE UP THE VSL
PUSH M,S1 ;QUEUE UP VOLUME RSN
$RETT
;Queue all the volumes in the volume set
VSLR.3: LOAD P2,.VSCVL(P1),VS.CNT ;GET THE VOLUME COUNT
MOVNS P2 ;NEGATE IT
MOVSS P2 ;MOVE RIGHT TO LEFT
HRRI P2,.VSVOL(P1) ;CREATE VOL AOBJN AC
VSLR.4: MOVE S1,0(P2) ;GET A VOLUME ADDRESS
SKIPN .VLNAM(S1) ;ANY VOLID SPECIFIED ???
JRST VSLR.5 ;NO,,DON'T QUEUE ANYTHING UP !!!
PUSHJ P,D$TVRS ;YES,,CONVERT IT TO A RSN
PUSH M,P1 ;QUEUE UP THE VSL
PUSH M,S1 ;QUEUE UP THE VOLUME RSN
VSLR.5: AOBJN P2,VSLR.4 ;CONTINUE FOR ALL VOLUMES
$RETT ;AND RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL SETSTK - Setup a queue for VSL, RSN pairs
;This routine sets up a queue so that all resource numbers for a
; given VSL or group of VSLs can be stashed in one place.
TOPS10<
SETSTK: MOVE M,[IOWD RPDLEN,RSNPDL] ;AIM AT THE QUEUE
PUSH M,[-1] ;MARK THE END OF THE QUEUE
PUSH M,[-1] ;ONE MORE TIME !!!
$RETT
RPDLEN==^D100*2 ;SPACE FOR 100 VSL, RSN PAIRS
RSNPDL: BLOCK RPDLEN ;THE RSN STACK
> ;END TOPS10 CONDITIONAL
SUBTTL GETADD - ROUTINE TO CALC THE 'A', 'B', 'C' MATRIX ADD VALUE
; GETSUB - ROUTINE TO CALC THE 'A', 'B', 'C' MATRIX SUB VALUE
;CALL: S1/ The RSN
; S2/ The VSL Address whose resource is being updated or 0 if none
;
;RET: S1/ The RSN
; S2/ The Additive or Subtractive Quantity
;This routine returns a vslue in S2 which is then used in updating
;The deadlock avoidance matricies. This value is determined as
;follows: If the Resource Type is %STRC, and the VS.SIN
;flag bit is lit, then return MAXRES in S2. If both of those
;conditions are not met, then return 1 in S2. If the GETSUB entry
;Point is used, Then the negative of those 2 values is returned.
TOPS10<
GETADD: TDZA TF,TF ;INDICATE 'GETADD' ENTRY POINT
GETSUB: SETOM TF ;INDICATE 'GETSUB' ENTRY POINT
JUMPE S2,[MOVEI S2,1 ;NO VSL ADDRESS,,GET A 1
SKIPE TF ;WAS 'GETSUB' ENTRY POINT USED ???
MOVNS S2 ;YES,,NEGATE THE VALUE
$RETT ] ;AND RETURN
$SAVE <S1,P1> ;SAVE S1 AND P1 FOR A SECOND
IMULI S1,AMALEN ;GET THE 'A' MATRIX OFFSET
ADD S1,AMATRX ;POINT TO THE 'A' MATRIX ENTRY
LOAD S1,.AMSTA(S1),AM.DVT ;GET THE RESOURCE TYPE
LOAD P1,.VSFLG(S2),VS.SIN ;GET THE 'SINGLE ACCESS' FLAG BIT
MOVEI S2,1 ;DEFAULT TO A 1
CAXN S1,%STRC ;IS THIS A STRUCTURE RESOURCE ???
SKIPN P1 ;YES,,AND IS SINGLE ACCESS REQUIRED ??
SKIPA ;NOT A STR OR NOT SINGLE ACCESS,,SKIP
MOVX S2,MAXRES ;ELSE LOAD MAX RESOURCE COUNT
SKIPE TF ;WAS ENTRY POINT 'GETSUB' ???
MOVNS S2 ;YES,,THEN NEGATE THE VALUE
$RETT ;RETURN
> ;END TOPS10 CONDITIONAL
SUBTTL MISC ROUTINES
TOPS10<
D$DEC:: $TEXT (,<^D4/S1/ ^A>)
$RETT
D$CR:: OUTSTR [BYTE(7)15,12,0,0,0]
POPJ P,
D$TEXT:: $TEXT (,<^T/0(S1)/^A>)
$RETT
DUMP: $SAVE <TF,S1,S2>
PUSH P,AMATRX
PUSH P,BMATRX
PUSH P,CMATRX
LOAD S1,AMATRX
LOAD S1,.AMHDR(S1),AM.CNT
PUSH P,S1
PUSH P,PROCNT
PUSHJ P,D$DUMP##
SUB P,[5,,5]
$RETT
> ;END TOPS10 CONDITIONAL
SUBTTL MDA PSEUDO PROCESS ACTION ROUTINES
;CALL: S1/ The .QE Address
;
;RET: True Always
;SUBTTL D$PPRL - ROUTINE TO DELETE AN MDR FOR A PSEUDO PROCESS
TOPS10<
D$PPRL: SKIPN G$MDA## ;ARE WE RUNNING WITH MDA ???
$RETT ;NO,,RETURN
$SAVE <AP,CM,BM> ;SAVE SOME AC'S
SKIPE AP,.QEMDR(S1) ;CHECK AND LOAD THE MDR ADDRESS
PJRST D$DMDR ;DELETE THE MDR FOR THIS REQUEST
$RETT ;NONE,,RETURN
> ;END TOPS10 CONDITIONAL
TOPS20<
D$PPRL: $RETT > ;A NOOP ON THE -20
SUBTTL D$PPRE - ROUTINE TO RESET A REAL PROCESS TO A PSEUDO PROCESS
D$PPRE:
TOPS10< SKIPN G$MDA## ;ARE WE RUNNING WITH MDA ???
$RETT ;NO,,RETURN
$SAVE <P1,P2,P3,P4,AP,CM,BM> ;SAVE ALL THESE AC'S
MOVE P1,S1 ;SAVE THE QE ADDRESS
SKIPN AP,.QEMDR(P1) ;CHECK AND LOAD THE MDR ADDRESS
$RETT ;RETURN IF NONE...
PUSHJ P,D$BMTX ;LOCATE THE PROCESS 'B' MATRIX
PUSHJ P,D$CMTX ;LOCATE THE PROCESS 'C' MATRIX
MOVE S1,.QERID(P1) ;GET THE PROCESS REQUEST ID
TXO S1,BA%JOB ;CREATE THE PSEUDO JOB NUMBER
STORE S1,.MRJOB(AP),MD.PJB ;CONVERT THE MDR TO A PSEUDO PROCESS MDR
STORE S1,.QEJBN(P1),QE.BJN ;SAVE IT HERE ALSO
MOVEM S1,.SMJOB(BM) ;CONVERT THE 'B' MATRIX AND
MOVEM S1,.SMJOB(CM) ;CONVERT THE 'C' MATRIX
SETZM G$ACK## ;WE DON'T WANT AN ACK LATER !!!
INCR .MRCNT(AP),MR.LNK ;GEN A NEW LINK CODE
LOAD P3,.MRCNT(AP),MR.LNK ; AND LOAD IT INTO P3
LOAD P4,.MRCNT(AP),MR.CNT ;GET THE VSL REQUEST COUNT
MOVEI P2,.MRVSL(AP) ;GET VSL LIST ADDRESS
ADDI P2,-1(P4) ;WORK FROM LAST VSL TO FIRST
PPRE.1: MOVE S1,0(P2) ;GET A VSL ADDRESS
MOVE P1,.VSFLG(S1) ;SAVE THE VOL SET FLAG BITS
PUSHJ P,D$ALCV ;RETURN THIS VSL'S ALLOCATION
MOVE S1,0(P2) ;GET THE VSL ADDRESS BACK
TXNE P1,VS.UAL ;DID THE USER ALLOCATE THIS VSL ???
TXNE P1,VS.ALC ;YES,,DID HE HAVE IT MOUNTED ???
JRST PPRE.2 ;NOT USER ALLOC OR NOT MOUNTED,,SKIP
ZERO .VSFLG(S1),VS.ALC ;WANT THIS REMOUNTED !!
STORE P3,.VSRID(S1),VS.LNK ;RESET TO A COMMON LINK CODE
PPRE.2: SUBI P2,1 ;GET NEXT VSL ADDRESS
SOJG P4,PPRE.1 ;CONTINUE FOR ALL VSL'S
MOVE S1,.MRQEA(AP) ;GET THE QE ADDRESS
MOVX S2,QE.WAM+QE.ALR ;GET 'ALLOCATION PRE-SCAN' BITS
ANDCAM S2,.QESEQ(S1) ;CLEAR THEM
MOVX S2,QE.WAL ;FORCE ANOTHER PRE-SCAN BY
IORM S2,.QESEQ(S1) ; LIGHTING THIS BIT
> ;END TOPS10 CONDITIONAL
$RETT ;AND RETURN
SUBTTL D$PMDR - ROUTINE TO LOOK AT THE MDR LOOKING FOR PSEUDO PROCESSES
;CALL: No Args
;
;RET: True Always
TOPS10<
D$PMDR: SKIPN G$MDA## ;ARE WE RUNNING WITH MDA ???
$RETT ;NO,,RETURN
MOVE S1,MDRQUE ;GET THE MDR QUEUE ID
PUSHJ P,L%FIRST ;GET THE FIRST ENTRY
JRST PMDR.2 ;JUMP THE FIRST TIME
PMDR.1: MOVE S1,MDRQUE ;GET THE MDR QUEUE ID
PUSHJ P,L%NEXT ;GET THE NEXT ENTRY
PMDR.2: JUMPF .RETT ;DONE,,RETURN
MOVE AP,S2 ;SAVE THE ENTRY ADDRESS
LOAD S1,.MRJOB(AP),MD.PJB ;GET THE JOB NUMBER
TXNN S1,BA%JOB ;IS IT A PSEUDO PROCESS
JRST PMDR.1 ;NO,,SKIP IT
MOVE S1,.MRQEA(AP) ;GET THE QE ADDRESS
ZERO .QESEQ(S1),QE.ALR ;ZAP THE REQUEST FOR ALLOCATION BIT
MOVE S1,.MRVSL(AP) ;GET THE VSL ADDRESS
PUSHJ P,D$MNTV ;TRY TO MOUNT IT
JRST PMDR.1 ;AND GO GET THE NEXT
> ;END TOPS10 CONDITIONAL
TOPS20<
D$PMDR: $RETT > ;A NOOP ON THE -20
SUBTTL D$MODR - ROUTINE TO MODIFY A USERS ALLOCATION ON THE 'FLY'
;CALL: S1/ The VSL to be modified
; S2/ The UCB of the device to be added
;
;RET: True if user can have the volume, false otherwise
TOPS10<
D$MODR: PUSHJ P,.SAVE3 ;SAVE P1 - P3
DMOVE P1,S1 ;SAVE THE VSL AND UCB ADDRESSES
SKIPN P3,.UCBVL(P2) ;CHK AND LOAD THE MOUNTED VOL ADDRESS
$ERJMP MD$NVM,P1 ;NONE THERE,,SOMETHING FISHY HERE !!!
;Check/Validate the Density Status
MOVX S1,VL.SRD ;GET SET REQUESTED DENSITY FOR USER BIT
ANDCAM S1,.VLFLG(P3) ;CLEAR IT INCASE SECOND TIME THROUGH
LOAD S1,.VSATR(P1),VS.DDN ;DID WE DEFAULT THE DENSITY ???
JUMPN S1,MODR.1 ;YES,,CONTINUE ONWARD
LOAD S1,.VSATR(P1),VS.DEN ;NO,,GET THE REQUESTED DENSITY CODE
LOAD S2,.VLFLG(P3),VL.DEN ;GET THE VOLUME DENSITY
CAMN S1,S2 ;IT WOULD BE NICE IF THEY MATCHED
JRST MODR.1 ;THEY DO
LOAD S1,.VLFLG(P3),VL.LBT ;GET THE VOLUME LABEL TYPE
PUSHJ P,GETLBT ;CONVERT IT
MOVX S2,UC.WLK ;GET THE WRITE LOCKED BIT
CAIN S1,%UNLBL ;UNLABELED?
TDNE S2,.UCBST(P2) ;CANT SCREW AROUND UNLESS WRITE-ENABLED
$ERJMP MD$RDD,P1 ;UNLABELED OR WRITE-LOCKED
LOAD S1,.VSATR(P1),VS.DEN ;GET THE REQUESTED DENSITY
MOVE S1,D$DEN(S1) ;CONVERT CODE TO A BIT MAP
TDNN S1,.UCBST(P2) ;DRIVE SUPPORT THE REQUESTED DENSITY?
$ERJMP MD$IDD,P1 ;OPERATOR IS A JOKER
MOVX S1,VL.SRD ;GET SET REQUESTED DENSITY FOR USER BIT
IORM S1,.VLFLG(P3) ;REMEMBER FOR LATER
;Check/Validate the Track Status
MODR.1: LOAD S1,.VSATR(P1),VS.DTK ;DID WE DEFAULT THE TRACK STATUS ???
JUMPN S1,MODR.2 ;YES,,CONTINUE ONWARD
LOAD S1,.VSATR(P1),VS.TRK ;GET THE REQUESTED TRACK STATUS
LOAD S2,.UCBST(P2),UC.TRK ;GET THE DEVICE TRACK STATUS
CAME S1,S2 ;THEY MUST MATCH !!!
$ERJMP MD$TDM,P1 ;NO,,TOO BAD
;Check to see if requested resource matches assigned resource
MODR.2: LOAD S1,.VSATR(P1),VS.RSN ;GET THE REQUESTED DEVICE TYPE
SKIPN S1 ;CAN'T BE ZERO !!!
PUSHJ P,S..ITR ;YES,,DEEEEEP TROUBLE !!!
LOAD P2,.UCBST(P2),UC.RSN ;GET THE DEVICE RESOURCE NUMBER
CAMN S1,P2 ;DO WE MATCH ???
JRST MODR.3 ;YES,,HE WINS BIG !!!
;See if we can change his allocation to include this device
PUSHJ P,D$BMTX ;LOCATE THE USERS 'B'
PUSHJ P,D$CMTX ; AND 'C' MATRIX ENTRIES
DMOVE S1,P1 ;GET VSL (P1) AND RSN (P2)
PUSHJ P,MODALC ;MODIFY THE USERS ALLOCATION
SKIPT ;WIN,,CONTINUE
$ERJMP MD$DDD,P1 ;RETURN THE ERROR (DEADLOCK DETECTED) !!
MODR.3: LOAD S1,.VLFLG(P3),VL.DEN ;GET THE MOUNTED VOLUME DENSITY
MOVX S2,VL.SRD ;GET SET REQUESTED DENSITY FOR USER BIT
TDNN S2,.VLFLG(P3) ;GONNA DO THIS LATER?
STORE S1,.VSATR(P1),VS.DEN ;NO - RESET IT FOR THIS VSL
$RETT ;RETURN
SUBTTL SHUFFL - Routine to shuffle resources around for a requestor
;CALL: S1/ A 'current' VSL address
;
;RET: True if resources shuffled OK, false otherwise
;This routine attempts to resolve deadlocks for a user by allocating
;different resources to a users request. The current (new) requests
;are shuffled first, then old requests are looked at. If, after all
;of this there is still a deadlock, tough noogies !!!
SHUFFL: $SAVE <P1,P2,P3,P4,T1> ;SAVE SOME AC'S
STKVAR <<VQUEUE,40>> ;ALLOCATE SOME QUEUE SPACE
LOAD P2,.VSRID(S1),VS.LNK ;GET THE LINK CODE (NEW REQUESTS)
MOVEI P3,VQUEUE ;GET THE QUEUE ADDRESS
ADD P3,[-40,,-1] ;CREATE QUEUE PDL POINTER
PUSH P3,[-1] ;SIGNAL END OF 'NEW' REQUEST QUEUE
MOVE P4,P ;SAVE THE CURRENT STACK POINTER
PUSH P,[-2] ;SIGNAL END OF 'OLD' REQUEST QUEUE
LOAD P1,.MRCNT(AP),MR.CNT ;GET THE REQUEST COUNT
MOVNS P1 ;NEGATE IT
MOVSS P1 ;MOVE RIGHT TO LEFT
HRRI P1,.MRVSL(AP) ;CREATE AOBJN AC
SHUF.1: MOVE S1,0(P1) ;GET A VSL ADDRESS
LOAD S2,.VSFLG(S1),VS.TYP ;GET THE REQUEST TYPE
CAXE S2,%TAPE ;A TAPE ???
JRST SHUF.2 ;NO,,GET NEXT
PUSHJ P,D$FOWN ;DOES HE HAVE IT MOUNTED ???
JUMPT SHUF.2 ;YES,,SKIP THIS
MOVE S1,0(P1) ;GET THE VSL ADDRESS BACK
LOAD S2,.VSRID(S1),VS.LNK ;GET ITS LINK CODE
CAMN P2,S2 ;A 'NEW' REQUEST ???
PUSH P3,S1 ;YES,,QUEUE IT UP
CAME P2,S2 ;AN 'OLD' REQUEST ???
PUSH P,S1 ;YES,,QUEUE IT UP
SHUF.2: AOBJN P1,SHUF.1 ;CHECK ALL REQUESTS
PUSHJ P,D$BMTX ;LOCATE THIS GUYS 'B' MATRIX ENTRY
PUSHJ P,D$CMTX ;LOCATE THIS GUYS 'C' MATRIX ENTRY
SHUF.3: POP P3,P1 ;DE-QUEUE A VSL ADDRESS
CAMN P1,[-1] ;DONE WITH THE 'NEW' QUEUE ???
JRST [MOVE P3,P ;YES,,GET POINTER TO 'OLD' QUEUE
JRST SHUF.3 ] ;AND KEEP ON TRUCK'N !!!
CAMN P1,[-2] ;DONE WITH THE 'OLD' QUEUE ???
JRST [MOVE P,P4 ;RESTORE THE STACK POINTER
$RETF ] ;JUST NO WAY TO CONTINUE !!!!!
LOAD S1,.VSATR(P1),VS.DEN ;GET HIS DENSITY CODE
MOVE S1,D$DEN(S1) ;CONVERT TO A BIT MASK
LOAD S2,.VSATR(P1),VS.TRK ;GET THE TRACK TYPE
LOAD T1,.VSATR(P1),VS.RSN ;GET THE CURRENT RESOURCE
PUSHJ P,ANYTAP ;GET THE NEXT RESOURCE WHICH FITS
JUMPF SHUF.3 ;NO MORE RESOURCES,,TRY NEXT REQUEST
MOVE S2,S1 ;GET THE NEW RESOURCE IN S2
MOVE S1,P1 ;GET THE VSL ADDRESS IN S1
PUSHJ P,MODALC ;MODIFY HIS ALLOCATION
JUMPF SHUF.3 ;LOSE,,TRY NEXT REQUEST
MOVE P,P4 ;RESTORE THE STACK POINTER
$RETT ;WIN,,RETURN
SUBTTL MODALC - Routine to modify a users resource number for a request
;CALL: S1/ The VSL Address
; S2/ The New Resource Number (RSN)
;
;RET: True - users matrix entries updated
; False - Deadlock detected (no matrix modifications)
MODALC: PUSHJ P,.SAVE3 ;SAVE P1 AND P3
DMOVE P1,S1 ;SAVE THE VSL ADDRESS AND NEW RSN
LOAD P3,.VSFLG(P1),VS.CLM ;GET THE RESOURCE CLAIMED STATUS IN P2
LOAD S1,.VSATR(P1),VS.RSN ;GET THE REQUESTED DEVICE TYPE
MOVE S2,P1 ;GET THE VSL ADDRESS IN S2
PUSHJ P,SUBBMA ;DELETE HIS 'B' MATRIX ENTRY
JUMPE P3,.+3 ;NOT CLAIMED,,DON'T MODIFY 'A' & 'C'
PUSHJ P,SUBAMA ;DELETE HIS 'A' MATRIX ENTRY
PUSHJ P,SUBCMA ;DELETE HIS 'C' MATRIX ENTRY
MOVE S1,P2 ;GET THE NEW RESOURCE NUMBER IN S1
MOVE S2,P1 ;GET THE VSL ADDRESS IN S2
PUSHJ P,ADDBMA ;ADD A NEW 'B' MATRIX ENTRY
JUMPE P3,.+3 ;NOT CLAIMED,,DON'T MODIFY 'A' & 'C'
PUSHJ P,ADDAMA ;ADD A NEW 'A' MATRIX ENTRY
PUSHJ P,ADDCMA ;ADD A NEW 'C' MATRIX ENTRY
PUSHJ P,DEADLK ;CHECK FOR DEADLOCKS
JUMPF MODA.2 ;FOUND SOME,,OH WELL WE TRIED !!!!
MODA.1: STORE P2,.VSATR(P1),VS.RSN ;WIN,,MODIFY HIS ALLOCATION
$RETT ;RETURN
;Here if user caused a deadlock - put matrix back in order
MODA.2: MOVE S1,P2 ;GET THE NEW RESOURCE NUMBER IN S1
MOVE S2,P1 ;GET THE VSL ADDRESS IN S2
PUSHJ P,SUBBMA ;DELETE HIS 'B' MATRIX ENTRY
JUMPE P3,.+3 ;NOT CLAIMED,,DON'T MODIFY 'A' & 'C'
PUSHJ P,SUBAMA ;DELETE HIS 'A' MATRIX ENTRY
PUSHJ P,SUBCMA ;DELETE HIS 'C' MATRIX ENTRY
LOAD S1,.VSATR(P1),VS.RSN ;GET THE REQUESTED DEVICE TYPE
MOVE S2,P1 ;GET THE VSL ADDRESS IN S2
PUSHJ P,ADDBMA ;RESTORE HIS 'B' MATRIX ENTRY
JUMPE P3,.+3 ;NOT CLAIMED,,DON'T MODIFY 'A' & 'C'
PUSHJ P,ADDAMA ;RESTORE HIS 'A' MATRIX ENTRY
PUSHJ P,ADDCMA ;RESTORE HIS 'C' MATRIX ENTRY
$RETF ;RETURN NO GOOD
> ;END TOPS10 CONDITIONAL
SUBTTL D$ALCT - ROUTINE TO ALLOCATE TAPE VOLUMES FOR 'IDENTIFY' COMMAND
;CALL: S1/ The VSL Address
;
;RET: True if no deadlock, False otherwise
TOPS10<
INTERN D$ALCT
D$ALCT: PUSHJ P,.SAVE2 ;SAVE P1 - P2
MOVE P1,S1 ;SAVE THE VSL ADDRESS
PUSHJ P,D$CMTX ;LOCATE THIS GUYS 'C' MATRIX ENTRY
LOAD S1,.VSCVL(P1),VS.OFF ;GET THE OFFSET TO THE CURRENT VOLUME
ADDI S1,.VSVOL(P1) ;POINT TO ITS ADDRESS
MOVE S1,0(S1) ;GET THE CURRENT VOLUME ADDRESS
PUSHJ P,D$TVRS ;GET THE VOLUME RESOURCE NUMBER
MOVE P2,S1 ;SAVE THE RSN IN P2
MOVE S2,P1 ;GET THE VSL ADDRESS IN S2
PUSHJ P,ADDAMA ;ADD THIS RESOURCE TO THE 'A' MATRIX
PUSHJ P,ADDCMA ;ADD THIS RESOURCE TO THE 'C' MATRIX
LOAD S1,.VSFLG(P1),VS.CLM ;HAS THIS DEVICE BEEN CLAIMED ???
JUMPN S1,ALCT.1 ;YES,,DON'T DO IT AGAIN
LOAD S1,.VSATR(P1),VS.RSN ;GET THE REQUESTED DEVICE RSN
MOVE S2,P1 ;GET THE VSL ADDRESS IN S2
PUSHJ P,ADDAMA ;ADD THIS RESOURCE TO THE 'A' MATRIX
PUSHJ P,ADDCMA ;ADD THIS RESOURCE TO THE 'C' MATRIX
ALCT.1: PUSHJ P,DEADLK ;PERFORM THE DEADLOCK CHECK
JUMPT [MOVX S1,VS.CLM ;WIN,,GET VSL CLAIMED STATUS
IORM S1,.VSFLG(P1) ;SET IT
$RETT ] ;AND RETURN
MOVE S1,P2 ;GET THE VOLUME RSN IN S1
MOVE S2,P1 ;GET THE VSL ADDRESS IN S2
PUSHJ P,SUBAMA ;REMOVE THIS RSN FROM THE 'A' MATRIX
PUSHJ P,SUBCMA ;REMOVE THIS RSN FROM THE 'C' MATRIX
LOAD S1,.VSFLG(P1),VS.CLM ;GET THE DEVICE CLAIMED STATUS BIT
JUMPN S1,ALCT.2 ;IF SET,,DON'T RETURN DEVICE ALLOCATION
LOAD S1,.VSATR(P1),VS.RSN ;GET THE DEVICE RESOURCE NUMBER
MOVE S2,P1 ;GET THE VSL ADDRESS
PUSHJ P,SUBAMA ;REMOVE THIS RSN FROM THE 'A' MATRIX
PUSHJ P,SUBCMA ;REMOVE THIS RSN FROM THE 'C' MATRIX
ALCT.2: $ERJMP MD$DDD,P1 ;RETURN AN ERROR
> ;END TOPS10 CONDITIONAL
END