Trailing-Edge
-
PDP-10 Archives
-
BB-H138B-BM
-
language-sources/qsrmac.mac
There are 45 other files named qsrmac.mac in the archive. Click here to see a list.
UNIVER QSRMAC -- Parameter File for QUASAR
;
;
; COPYRIGHT (c) 1975,1976,1977,1978,1979
; DIGITAL EQUIPMENT CORPORATION
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH GALCNF ;GET CONFIGURATION DATA
SEARCH GLXMAC ;GET GALAXY SYMBOLS
SEARCH ORNMAC ;GET OPERATOR SYMBOLS
SEARCH D60UNV ;DN60 SYMBOLS
.DIRECT .NOBIN ;NO REL FILE...
IFN FTUUOS,<IF1,<PRINTX Building a GALAXY-10 System>
SEARCH UUOSYM ;GET TOPS10-UUO SYMBOLS
> ;END OF IFN FTUUOS
IFN FTJSYS,<IF1,<PRINTX Building a GALAXY-20 System>
SEARCH MONSYM ;GET TOPS20-JSYS SYMBOLS
> ;END OF IFN FTJSYS
SALL ;SUPPRESS MACRO EXPANSIONS
%%.QSR==36 ;MAJOR CHANGE NUMBER OF QSRMAC
QSRVER==4 ;MAJOR VERSION NUMBER
QSRMIN==0 ;MINOR VERSION NUMBER
QSRWHO==0 ;LAST EDITOR
QSREDT==350 ;EDIT NUMBER
SUBTTL Table of Contents
; TABLE OF CONTENTS FOR QSRMAC
;
;
; SECTION PAGE
; 1. Table of Contents......................................... 2
; 2. Revision History.......................................... 3
; 3. Accumulator Definitions................................... 11
; 4. Symbols derived from GALCNF............................... 12
; 5. Changable System Parameters............................... 13
; 6. Abbreviations Used in QUASAR-10........................... 14
; 7. RDB -- Request Descriptor Block......................... 15
; 8. ROB -- Requested Object Block........................... 17
; 9. QH -- Queue Header Definitions......................... 18
; 10. QE -- Queue Entry Definitions.......................... 19
; 11. OBJ -- Object Queue..................................... 21
; 12. PSB -- Processor Status Block........................... 23
; 13. SPL -- Spool Queue Definition........................... 24
; 14. CSM -- Canonical SPOOL Message.......................... 25
; 15. CLM -- Canonical LOGOUT Message......................... 26
; 16. The Messages and their respective codes................... 27
; 17. The HELLO Message -- Function 1........................... 28
; 18. The RELEASE Message -- Function 2......................... 29
; 19. The CHECKPOINT and REQUEUE messages -- Functions 3 and 4.. 30
; 20. The NEXTJOB and CREATE Messages -- Functions 5 and 7...... 31
; 21. EQ -- The External Queue Entry......................... 32
; 22. The ABORT Message -- Function 6........................... 40
; 23. The LIST Message -- Function 10........................... 41
; 24. The MODIFY Message -- Function 11......................... 42
; 25. The KILL Message -- Function 12........................... 44
; 26. The LIST ANSWER Message -- Function 13.................... 45
; 27. The REQUEST FOR CHECKPOINT Message -- Function 15....... 47
; 28. The DEFER Message -- Function 16........................ 48
; 30. Event Counters............................................ 50
; 31. The COUNT Message -- Function 20........................ 52
; 32. The COUNTANSWER Message -- Function 21.................. 53
; 33. The SETUP/SHUTDOWN Message -- Function 22............... 54
; 34. The RESPONSE-TO-SETUP Message -- Function 23............ 55
; 35. The OPERATOR-ACTION Message -- Function 24.............. 56
; 36. The HOLD/RELEASE Message -- Function 25................. 57
; 37. The SPOOL Message - Function 26 (sent by IPCC)............ 58
; 38. The LOGOUT Message - Function 27 (sent by IPCC)........... 60
; 39. IPCF Parameters........................................... 61
; 40. Common Parameters......................................... 62
; 41. Prolog macro for generating common header................. 63
; 42. Random Macros............................................. 64
; 43. Failsoft System Definitions............................... 65
; 44. QUASAR Fatal Error Codes.................................. 66
; 45. Definition of the Known Queues............................ 67
SUBTTL Revision History
COMMENT \
Edit Module Explanation
1 ALL First System Version Of QUASAR-10 February, 1975
2 QSRSCH Operator NEXT Command Caused Batch Job Tables To Get Out Of Sync
3 QSRMEM Add New Routine For Cusp Version (CSPMEM) To Clean Core When
Cusp Is Going Dormant. Call It M$CLNC
4 QSRMAC Invent High Availability Queues
The Pages Belonging To Them Remain Even If The Queue Is Empty
Define QH.HAQ In The Queue Header Flags, Include In QUEUES Macro
QSRMEM Have M$GCOL Collect Empty Pages That Are Not High Availability
Remove Some Checks From M$PFRE
5 QSRSCH Clean up some code in SCHSTR to remove an extra
call to I$VSTR.
QSRIPC Have SNDFAI save the correct address of a requeued message
in the IPS entry, and also have it requeue "all"
messages to SYSINF whether the error was recoverable
or not.
QSRQUE Q$KLPD clobbers H and AP causing a great deal of trouble.
Preserve both of them. Also take check out of Q$RTMS for
the message type, and call Q$KLPD for all returned messages.
6 QSRFSS Move index-SAT words into the index itself.
Start integrating code for multiple sections.
QSRINT Start moving code to open the master queue files into QSRINT
from QSRFSS.
7 QSRFSS Fully integrate code for multiple sections.
QSRINT On TOPS10 whenever master queue file is extended,
force the RIBs to be written. On fatal STOPCDs,
store away acs so they can be found easily.
Call M$IPRM when an IPCF receive failed with error IPCUP%.
QSRMEM Install M$IPRM
10 QSRMAC Define the TEXT Message as an acknowledgement of an operation.
QUASAR Implement the global string routines to build the TEXT message.
Give TEXT message as a return if the caller sets MS.ACK non-zero.
QSRINT Invent I$WHEEL to check if caller is an operator of some flavor.
QSRQUE Call I$WHEEL in HELLO message processor.
Send explicit TEXT acknowledgements after KILL, MODIFY, LIST.
QSRSCH Call I$WHEEL during default processing if (.EQDIR .NE. G$DIR)
11 ALL Insert code for the 6.02 device names.
QSRQUE Move changable data from the internal queue to the external
queue request during Q$NEXTJOB.
QSRSCH Insure the Batch job limits for cards, paper tape, etc...,
get applied to the spooled requests.
QSRINT Complete moving code to open master files from QSRFSS.
12 QSRSCH Broadcast TEXT message with TX.NMS set now that it has been defined
QSRQUE Remove the old Q$SYNC code.
CSPQSR Watch for in-coming TEXT messages
13 ALL This is the version of QUASAR-10 sent to Field Test, June, 1975.
14 QSRMAC Eliminate most of edit 12 and instead invent the Request For Checkpoint
message. Every SPLMBC minutes, ask the component to Checkpoint itself.
Add a word to the PSB to contain the next time to request a checkpoint.
Define ABO.DI in the ABORT message as the directory of the requestor.
QSRSCH Keep track of the Checkpoint time, send during the scheduling loop.
The Request for Checkpoint message serves a dual purpose.
1) The individual spoolers don't need to watch the time for Checkpoints
2) The message is used to determine if the component is still alive
Therefore, dead interlock recovery is done every SPLMBC minutes.
QSRMEM Have ANYOUT look for pages to destroy first.
QSRQUE Install Q$RCK to actually send out the Request for Checkpoint message.
Include directory of sender in ABORT message.
15 QSRMAC Define the Canonical SPOOL Message.
QSRINT Invent a new class of routines, the FD Manipulaters.
QSRQUE Use the Canonical SPOOL Message throughout the spooling subroutines.
Generalize SPLINC to include based on the Canonical SPOOL Message,
call it Q$INCL.
QSRSCH Build a Canonical SPOOL Message in S$RELE, call Q$INCL for the Log File.
16 ALL Major Change of QSRMAC (#27).
QSRMAC Include /REPORT FP areas in all requests.
This adds 2 words to the minimum FP size.
QSRQUE Set and check the Request Doesn't Exist bit instead of the old ones.
QSRSCH Set RDE in the external request during SCHDEF if all files are /REMOVEd.
QSRINT Monitor change to 6.02. The extension of a spooled LL or LU is LPT.
17 GALGEN Ask for Automatic Forms Change Threshold.
QSRMAC Define FRMTHR = the answer from GALGEN.
Add definition of the DEFER Message.
Define the Canonical LOGOUT Message.
QSRQUE Include Q$DEFER to operate on the Defer Message.
Implement File-Specific Modifies.
Use the Canonical LOGOUT Message in Q$LOGOUT.
QSRMEM Define co-routine ".SAVAP" to save/restore AP.
Add ".CALLn" to save/restore the preserved acs.
QSRSCH Use FRMTHR instead of the absolute 100.
Build a Canonical LOGOUT Message in S$RELE.
QSRINT Add I$FMCH to compare 2 FDs with masks.
20 GALGEN Add question for enforcing the jobs core limit.
If the answer is YES, ask for the default value of /CORE.
If the answer is NO, define the default = 0.
QSRMAC Extract INPCOR = G.ICOR (the GALGEN value).
QSRSCH Insert code in INPSCH to use the core values.
21 ALL Become version 1A
22 ALL Major Change of QSRMAC (#30).
QSRINT Get the maximum IPCF packet size from the operating system during
initialization and store it in G$MPS.
Install I$CSM for TOPS20.
QSRQUE Determine the entry size for the IPC and IPS queues at runtime using
the maximum packet size in G$MPS.
Include the number of files in File-Specific Modify, re-work
Q$MODIFY, Q$KILL, Q$DEFER, BLDKMS, FILMOD.
QUASAR Use G$MPS whenever a check must be made for the maximum IPCF packet size.
23 QSRMAC Define the Universal Directory Specification
QUASAR Remove G$LOCS, G$SDIR, and G$FFAD
QSRINT Add more TOPS20 routines
24 ALL Make consistent use of connected and logged in
directories in TOPS20.
25 QSRIPC If C$GET does a query which returns false, clear IPCPND.
QSRINT Add I$READ and I$WRIT for TOPS20.
Add I$CRIP routine.
QSRFSS Call I$CRIP in the appropriate places.
26 **NOTE [SYSTEM]QUASAR no longer requires [SYSTEM]INFO
QSRMAC Add a bit in the external queue to indicate that the creator
of a request was privileged at the time of creation.
This will reduce the number of CHKACC's required in the spoolers.
QSRSCH Set the Privilege bit appropriately.
QUASAR Dispatch messages from [SYSTEM]IPCC independently.
QSRIPC Move code to establish a PID into QSRINT.
Remove C$ISM since QUASAR handles the dispatch.
QSRINT Add I$EPID and associated routines for acquiring a PID.
CSPQSR Remove code for [SYSTEM]INFO, call [SYSTEM]IPCC instead.
27 ALL Major Change of QSRMAC (#31).
QSRMAC Make .EQPAT optional and TOPS10 only.
QUASAR Lay the groundwork for handling multiple PIDs.
Add G$SFAL to notify all concerned of an invalid PID.
Isolate dispatch for messages directed to [SYSTEM]QUASAR (G$QPID).
QSRQUE Remove Q$RTMS, G$SFAL directly calls Q$KLPD.
QSRIPC Add C$GIPC to get a specific response from [SYSTEM]IPCC.
Re-arrange SNDFAI to call G$SFAL.
QSRMEM Define co-routine ".SAVEH" to save/restore H.
30 QSRINT Break up QSRINT into the appropriate modules.
Name the new ones QSRT10 & QSRT20.
31 QSRQUE Have CHKMCH just check for matching owner field
rather than complete directory.
QSRSCH If the request protection field is 0 fill in a default
protection using the contents of G$SPRT.
32 QSRMAC Define TX.MOR indicating another ACK to follow.
QUASAR If TX.MOR is set at G$MSND, don't clear G$ACK.
Add G$CSIX for sixbit conversions.
Add G$CCHR for a Single Characters.
QSRQUE Have Q$CREATE send an explicit acknowledgement indicating:
Quename:Jobname=/SEQUENCE:s, n Files
33 QSRSCH Could ask for Forms Change for non-existant (EQ.RDE) requests,
Override Forms Type for those requests.
34 GALGEN Ask Questions about conversions from Blocks to "Units".
QSRMAC Extract the answers. Define EQ.NBL in .EQLM2 for Output Queues.
QSRQUE Replace code that deals with Spooled Limits with some that counts blocks.
QSRSCH Convert blocks to limit appropriately during default filling.
35 QSRMAC Invent the "listable" bit (QH.LST) in the queue header.
Put in CLQ message.
Add new bit to batch release message to flag that the
log file is to be printed.
QSRQUE Check "listable" bit on LIST requests.
ACK for CREATE in 'INP' with an after parameter was wrong
because H pointed to 'AFT'.
QSRSCH Zero copies field for log file if RL.PRL is off.
36 QSRSCH Default the /OUTPUT field in SCHDEF('INP').
37 ALL Become version 2.
Major change of QSRMAC (#32).
QUASAR Provide LUUO handler for new STOPCD calls.
QSRMAC Remove definitions now found in SBSMAC, Search it.
Make the same change to the PROLOGUE Macro.
Re-arrange CHECKPOINT and REQUEUE messages so that the
entire block is available for CHECKPOINT information.
QSRT20 Have I$KSYS return seconds to shutdown minus 1 minute.
Set up IPCF quotas during I$EPID.
Change I$STCD to accept standard calls.
QSRT10 Change I$STCD to accept standard calls.
QSRSCH Ask for checkpoint from all components after KSYS has expired.
QSRQUE Don't give extended "ACK" during create of "RDE" requests.
Change Q$CHECKPOINT and Q$REQUEUE to account for
the changes to those messages.
CSPQSR Accept indicator in call to CSPINI as:
0 = old style call
-1 = caller will handle interrupt system.
40 QSRQUE Deferred requests recovered from the failsoft file had
/LIMIT:0 sent to the spooler.
Move Q$CDIN to inline code in KILPSB.
QUASAR Add G$MCOR as minimum system value of /CORE.
QSRT10 Fill in G$MCOR with %CNMMX.
If IO.BKT is set on Master file, use SETSTS to clear it.
QSRT20 Set G$MCOR = 0, there is no system minimum.
QSRSCH Check value of G$MCOR after defaulting /CORE.
Use G$MCOR in input scheduling as PSB minimum.
QSRIPC PDL used during IPCF interrupts was too short.
Could miss a call to I$POST.
41 QSRQUE Report words not being cleared during Q$INCL.
Could MODIFY a file if it had been /REMOVEd previously.
QUASAR Wrong ac loaded on returned packets.
42 QSRMEM Re-define free space management to optimize size and paging.
Add M$MOVE for moving entries between queues.
QSRMAC Define the "route" message (function 17) to change the routing
of output from one station to another.
Include S$USE as scheduling vector for the USE queue.
QUASAR Add dispatch entry 17 to S$ROUTE.
QSRSCH Install S$ROUTE and tables required, convert station
numbers in OUTREJ.
Assume forms are frozen if "NO OPERATOR ON DUTY".
Apply the bias (SPLLIM) on a per file basis.
Add linking dispatch for the USE Queue (S$USE).
QSRT10
QSRT20 Install I$OPER to check if an operator is present.
QSRQUE Call M$MOVE during Q$REQUEUE, Q$NEXTJOB, Q$CKAF, and KILPSB.
43 GALGEN Don't convert LPT limit factor from pages/page to
pages/block. Add a question for the number of minutes before
system shutdown to stop scheduling automatic forms changes.
QSRMAC Extract new symbol from GALCNF.
QSRSCH If KSYS is set and is less than FRMKSY minutes away,
don't schedule a forms change.
PRIO:0 now means default. Default it in SCHDEF, and change
link-in routines to make PRIO:1 do fifo linking.
QSRT20 Maintain spooled file-sizes in pages on -20.
44 QSRADM Add new module QSRADM to handle system
administrative functions. Move all the routing routines
from QSRSCH to QSRADM.
QSRMAC Include .REQUIRE for QSRADM in PROLOGUE macro.
QUASAR Call A$INIT, and dispatch to A$ORTE on a
ROUTE message.
QSRSCH Remove routing code and put in QSRADM.
45 ALL Cleanup accumulator conventions in all QUASAR modules.
P registers "must" be saved by ALL routines which use them.
46 ALL Major change of QSRMAC (#33).
Start rearranging code and data-structures to allow for
new user and directory number format on TOPS20.
QSRMAC Add account string block to the EQ.
Define the Request Descriptor Block (RDB).
Invent new CBL error code.
QSRT10 Invent I$EQQE, I$QELA, I$SMEQ, I$RMCH, I$DFEQ.
Make I$VSTR much smarter.
Remove I$DCHK.
QSRT20 Invent I$EQQE, I$QELA, I$SMEQ, I$RMCH, I$DFEQ.
Write I$VSTR.
Remove I$DCHK.
Start removing/changing JSYSes which are non-
existant or different in TOPS20 release 2.
QSRMEM Invent M$PCNT to determine whether a given
number of pages can be acquired.
QSRQUE On LISTANSWER keep track of the number of pages
needed to build the listing and if the number of pages needed
to build the last listing are not available give the new
CBL error.
47 ALL Start putting in event counters.
QSRQUE Remove all PSB handling routines, Q$RCK, Q$HELLO, and Q$KLPD.
Move the ACK call from Q$LIST and move it to Q$LANSWER
after check for %CBL since otherwise user never gets CBL error.
QSRADM Insert all PSB handlers and routines removed from QSRQUE.
Invent COUNT and CNTANSWER messages.
QSRT20 Put in STGWLD routine to compare a "wild"
string against a base string.
Uninvent I$MSTR, it wasn't useful on -20.
QSRT10 Uninvent I$MSTR and have I$VSTR do its work.
50 QSRMAC Define flags for calling C$SEND.
QSRMEM In M$MOVE, if moving to a queue with no scheduling
vector defined, use M$ELNK to link the entry in.
QSRSCH Remove scheduling vector for USE QUEUE.
QSRIPC Modify calling sequence to C$SEND to optionally
allow specification of additional action to be performed.
QSRT10 Cleanup I$EPID a little.
Add some more debugging aids, i.e. the CRASH routine.
QSRT20 Change I$CHAC to allow access only if caller
is a wheel or the request owner.
Add some more debugging aids, i.e. the CRASH routine.
51 QSRMEM Call new routine I$MFFP to find first free page in
my address space during initialization.
QSRT10 Add new routine I$MFFP.
QSRT20 Add new routine I$MFFP.
52 QSRMAC Add QUASAR job number to COUNTANSWER.
QSRT10 Set job number in COUNTANSWER.
QSRT20 Set job number in COUNTANSWER and fix problems with I$VSTR.
53 QSRMEM Incorporate performance improvements in garbage collection
and free page searching.
QSRT10 GETTAB directories for prime and redundant queues at
initialization time on -10.
54 QSRT10 Make I$GTAB into a local routine.
QSRT20 Extract structure from spooled file name and store it
in the CSM so FTSPLIT works on the -20.
QSRIPC Set "truncate if too long" on all receives.
CSPQSR Set "truncate if too long" on all receives.
GALGEN Ask about FTSPLIT on the -20.
55 QSRSCH Call routines in operating system interface to handle
/UNIQUE checking of directories.
QSRT10
QSRT20 Add I$UQST, I$UQCL, I$UQCH to worry about /UNIQUE directory
checking for batch requests.
;;First field-test release of GALAXY release 2, Jan, 1977
56 QSRMAC Invent the RDE queue.
QSRQUE Place jobs which get the RDE bit set into a
separate queue, the RDE queue.
QSRSCH If a known component has said that it can handle RDE jobs,
try to schedule it one before checking the processing queue.
QSRT10 Make the maximum IPCF packet size equal to the
MAX(SPL.SZ,monitor supplied maximum).
57 QSRSCH Add the "bias" to the limit for each copy of each file
rather than each file.
200 QSRMAC Begin release 3 development. Major change of QSRMAC (#34).
Take length of FD out of the FP and add a length field to the FD.
Define two new queues, XFR and BIN.
ALL Use new FD/FP format. This change affects the format
of the CSM, FP, MODIFY message.
QSRSCH Add a release entry to scheduling vectors (SCHREL).
Add vectors for the new queues.
QSRQUE Call the SCHREL entry instead of S$RELE.
201 QSRT20 Fix some problems with edit 200.
202 QSR??? Change all QUASAR modules to use the new GLXLIB conventions,
routines and symbols. Also add some debugging code.
203 QSR??? Integrate more of GLXLIB
204 QSR??? Change to use the new GLXLIB segment
205 QSR??? Begin adding QSROPR, ORION-QUASAR interface
206 QSRMAC Remove file-specific modify symbols.
Remove FP.IGN field from the FP.
QSRSCH
QSRQUE Remove group 2 (file-specific) modify, and make the various
parameters part of the group 1 (queue-specific) modify parameters.
QSRT10
QSRT20 Remove I$FMCH.
207 QSR??? Make use of the GLXLIB module GLXINT for interrupt handling
and common operating system tasks.
210 QSR??? Move TEXT message to GLXMAC
211 QSRMAC Major change 35 to %%.QSR, message format change (.MSxxx)
212 QSRMAC Make /UNIQUE values 1 and 2 rather than 0 and 1 so that it can be default.
Make /RESTART a 2 bit field with values 1 and 2 for the same reason.
QSRSCH Default the /UNIQUE and /RESTART fields.
213 QSRMAC Add canonical device types
QSRADM Add new object queue creation code
QSRTx0 Add I$NLDV for finding number of local devices of type 'xxx'
214 QSRMAC Insert new definitions for the PSB and the HELLO message.
Insert definitions for new SETUP and RESPONSE-TO-SETUP messages.
QSRSCH Re-write entire module from scratch to implement new scheduling
algorithms.
QSRADM Re-write A$HELLO and KILPSB to keep up with all the other changes.
215 ALL Due to interim release on the -20 called version 3,
make this version 4 of GALAXY. Continue with new
scheduling changes.
216 QSRMAC Change ROUTE message to use full words for nodes, to allow
QSRADM TOPS20 style node names
217 QSRMAC Add symbol for file spooler XFRSPL OBJect type.
Add mask symbol for flags in flags word of HELLO message.
220 QSRMAC Get rid of the AFT queue and keep AFT jobs in the
QSRQUE appropriate external queue.
QSRSCH
221 QSRMAC Add new Table of Contents.
222 QSRQUE
QSRSCH Make jobs which have been scheduled and checkpointed at
least once get restarted sooner after a system crash by
invisibly bumping its priority.
223 ALL Remove FTSPLIT conditional in preparation of new general
dependency list.
224 QSRMAC Define new data-structures (and re-define old ones) for new
dependency list.
225 QSRMAC Create the QSRMDA module which will contain all the routines
QSRMDA which do things with file-structures. Include the .REQUIRE
for QSRMDA in the PROLOGUE macro.
226 QSRMAC Invent the RDR queue for Readers (card). Take the structure
QSRSCH word out of the LISTANSWER message and just include a bit
QSRQUE which indicates waiting for structure.
227 QSRT10 Add a routine to validate objects.
QSRADM Add the hooks to call the object validation routine.
QSRMAC Add INPMAX which defines the maximum number of Batch
streams which can be started.
230 QSRMAC Change PROLOGUE macro to .REQUIRE QSRSHO if QUASAR is defined.
QSRSHO Add a new QUASAR module for display messages.
231 QSRMAC Remove .REQUIRE Statements for all Modules
and Create a Separate Command file QUASAR.CMD
to load the module.
232 ALL Remove PROLOGUE macro from QSRMAC. Use PROLOGUE in GLXMAC.
233 ALL Changed DEFLIM OUTP to be compatible with QMANGR
234 QSRADM Modified The route processor for the new
message types.
QSRDSP Added the SHOW ROUTE TABLE message processor.
235 QSRMAC Modified INPMAX so as to get its value as a GALGEN parm.
QUASAR Added G$NBAT as a global parm. Used to keep track
of the number of batch streams started.
QSRT10 Modified I$VOBJ to use G$NBAT
QSRSCH Modified the SHUTDOWN code to Update G$NBAT.
236 QSRMAC Define a symbol representing the number of
words used for the .EQLIM block. Also, get
rid of the old .EQ??? and EQ.??? symbols.
237 QSRMAC Add IBM and Card Reader queues
QSRSCH Add Card Reader scheduling code. IBM is the same as card punch.
240 QSRMAC Add the new Network data base structure.
QSRSCH Modify all calls to network subrutines to use the new routines
QSRADM Deleted all network support from this module
QSRNET Added this new QUASAR module in support of Networks.
241 QSRDSP Modified the queues display to its new format.
QSRSCH Modified the scheduler so that network devices get shutdown
when the queue is empty.
242 QSRT10 Fixed I$LGFD so that it generates ledgible file names
QSRMDA Fixed a bug in D$ESTR which allowed null structure names.
243 QSRADM Added support for SET LIMIT-EXCEEDED commands.
QSRMAC Here also
QSRMAC Added support for DISP:RENAME
244 QSRMAC Modify the Spool Msg structure for DISP:RENAME
QSRT10 Add more DISP:RENAME code
245 QSRT10 Complete the DISP:RENAME coding
246 QSRQUE Fix a bug which caused create's with bad structure names
to be fail-softed. This caused QUASAR to stopcode
if it was restarted since when Q$CREATE rejected the
entry the second time, QSRFSS couldnt handle it.
247 QSRMAC Add .FPINF to the EQ for the card reader
QSRSCH Add defaults for the SPRINT queue
QSRT10 Fix I$CSM for DISP:RENAME
250 QSRMAC Changed a duplicate definition of SP.DFR under SPL.SF
to SP.FLG.
QSRT10 Changed I$CSM to use the new definition.
251 QSRT20 Fix a bug in I$CSM so that device numbers specified
in the spool message FD are parsed.
252 QSRMAC Expand EQ limit block to 6 words.
Define a Device Status Update msg (Function 31).
Change the Object queue entry OBJSTS to 1 word which
will contain a code describing the Object status.
Define the object status codes.
Add operator intervention symbols, DEFLIM it, and add
to the Object queue parameter words
Add RSU.CD to the Response-to-Setup message. This
contains an optional reason why the device count not
be started.
253 QSRQUE Fix the Request-Id logic so that RIDs are maintained
after queue modification
QSRSCH Add code to INPFJB so that it checks the opr intrvn
status before scheduling a job for a stream.
Add code to default the opr intrvn status for batch jobs.
254 QSRIPC Fix C$GET so that oversize packets are recieved properly.
255 QSRADM Remove Set Job Priority - make it a Modify Command.
Add code for Set OPr/NO-OPR Intrvn.
Change A$OREQ, A$OHLD, A$OREL to use Req Id instead of
Jobname & Seq number.
Add A$DELETE to remove jobs from the queues
Add A$STATUS to update the Object status via a device
status update message
256 QSRT10 Fix I$LGFD so that it generates unique funny-name
log file-specs
257 QSRDSP Re-write the Show Status and Show Parameters routines
to display the data in a different format
260 QSRSCH Add code
QSRT10 to support
QSRQUE the /NOTIFY option
261 QSRMAC Add %READN to object status code list.
QSRADM Fix A$OBST so the Free running objects are always set 'IDLE'
QSRDSP Fix DMPSTS so that the call to CHKSPC for the /AFTER parm
is made after we're sure that there is a /AFTER parm
QSRQUE Modify NOTIFY routine to put out a crlf first.
262 QSRMAC Delete Function 24, operator action message (Now obsolete)
QUASAR Add G$RMTE for remote operator queue requests
It contains the node at which the operator is located.
QSRQUE Fix Q$CREATE so that the correct number of limit words
are BLT'd from the EQ to the QE
Modify FNDREQ so that if its checking an operator request,
it looks at G$RMTE and only wins if the queue entry is
destined for that operators remote station
QSRSCH Fixed LNKPRI so that priority 1 jobs are always linked
to the end of the queue, regardless of limit specifications.
QSRADM Added a DOSCHD to the SET message processing routine
Added code in A$MODIFY, A$OHLD, A$OREL, A$ODEL
and GENRDB to support the .ORNOD block in operator msgs.
QSRNET Make QUASAR completly Node number/Node name knowledgable.
Ie., make it so that it understands either an
octal node number or a sixbit node name in all cases where
a node value is referenced.
263 QSRMAC Add symbols for /BATLOG: switch
QSRSCH Add code for /BATLOG: support
264 QSRMAC Add %REQUE to the list of object status codes
QSRSCH Fix scheduling bug in batch for opr intrvn allowed
Also add defaulting code for batch log type
265 QSRMAC Change .QEJBN so that it contains 2 values:
QE.UJN==0,,-1 ;Users Job Number
QE.BJN==-1,,0 ;Batch Job Number
Also change CHE.FL, adding CH.JBN which is the
job number of the checkpointed batch job.
QSRQUE Modify Q$CHECKPOINT so that it save the batch job number.
Add routine Q$NOTIFY to setup /NOTIFY parameters.
QSRT10 Delete routine I$NOTF
QSRT20 Delete routine I$NOTF
266 QUASAR Deleted G$OLNK hack.
QSRSCH Deleted references to G$OLNK.
267 QSRMAC Delete .OTBIN and .OTXFR symbols. Define them in GLXMAC.
270 QSRSCH Add processing code for XFR queue. Simple first come
first serve scheduling.
271 QSRMAC Add symbols QE.AVO, QE.AVI to redefine .QEITN for
account verification (-10 only)
QSRSCH Add hooks for Account Verification
QSRT10 Add routines I$VACT, I$ACCT. These two routines
QSRT20 are used for Account Verification. I$ACCT is
a no-op on the -20.
272 QSRMAC Delete OBSNLP
QSRSCH Delete code supporting OBSNLP. This modifies the
scheduler such that it does not shut down objects
just because there are no jobs in the queue AND
there is another object which needs to be started.
Remote objects will still be shut down when the
Queue go empty.
273 QSRMAC Add QH.INV to queue header flag.
Add OBSINV to object flags
Add node block to list queues request message (function 10)
Add QH.INV to QUEUES macro.
QSRADM Add support for initializing invisible objects when the
object gets started.
QSRDSP Add support in D$SHST and D$SHPR so that invisible objects
are not displayed in status/parameters requests.
274 QSRMAC Delete SPRINT .EQLIM definitions for CMOD, CSIZ, NCRDS.
Add %EQUFT for file retrieval
Add new object scheduling bit OBSINT (internal shutdown)
QSRSCH Modify CHKOBJ so that it shutsdown the object if its
remote or if OBSINT is lit.
QSRT20 Modify I$DFEQ so that if the job name in the EQ is
null,,it gets defaulted to the first 6 chars of the filename.
QSRQUE Rewrote Q$ARCHIVE so that it conforms to GALAXY standards.
QSRADM Changed GETOBJ so that the right field is checked when
looking to see if the object is free running. (QH.TYP)
QSRDSP Changed DEPRET to fix a few bugs. (Wrong ac's, a PUSH and
no POP, etc.)
275 QSRMAC Add new message type .QONWA and description (function 36).
Add FP.RCD to the BIN queue FP description.
QSRNET Add NODE Jsys to GETNODE routine.
Modify N$INTR so that when a node goes offline, it
searches the object queue looking for objects started
and setup for that node. If it finds one, it sends a
node went away message to the controlling spooler.
When done, it sends ORION the same message.
QSRT20 Change I$RDEF so that it picks up the tape info from
the limit words instead of the checkpoint words.
QSRQUE Change Q$ARCHIVE so that it saves the tape info in
the limit words instead of the checkpoint words.
276 QSRMAC Move EQHSIZ to the end of the EQ header definition (where
its supposed to be)
277 QSRMAC Put all ARCHIVE definitions under TOPS20 conditional.
QSRQUE Move Q$ARCHIVE to QSRT20.
QUASAR Change Archive message entry point to I$ARCHIVE.
300 QSRMAC Add a redefinition of the RDB for ARCHIVE requests.
Delete the ARCHIVE definition's in the KILL msg.
Add an ARCHIVE msg Create code (.QIRET) so that
creates wont fail if Queue Creates are disabled.
QSRQUE Delete routine FNDFRR and make it work with FNDREQ.
QSRT20 Delete all Archive notification routines (they
were terribly written) and replace them with code
that works.
301 QSRMAC Change .EQUSR to .EQOWN (Just to be consistant)
Add symbol EQNMSZ which is the length of .EQOWN.
Add .QOCQE (Short Create message) to msg type table
QSRQUE Add Support code for .QOCQE (Short Create Message)
QUASAR Add .QOCQE to the QUASAR message Dispatch Table.
302 QSRMAC Change .EQTIM to .EQSPR (SPARE)
QSRADM Delete 'Requeue' from Request-Id error message
QSRQUE Change create ack to put out # of files if greater then 1.
303 QSRT20 Change Archeive Notify to put flag on in .OFLAG and to
use .CMDIR for the Directory
304 QSRMAC Add SUP.PL for DN60 PORT,,LINE #'s to SETUP message
305 QSRMAC Add SUP.ST For remote network status/flag bits in SETUP msg.
306 QSRMAC Add .OOTAP to OBJPRM definition and OBDTAP to
line printer attributes for spooling to mag tape
QSRADM Modify A$OSTA to support spooling to mag tape
QSRSCH Modify SETUP to support spooling to mag tape
307 QSRMAC Add NETBPM to network data base (Bytes Per Message)
QSRADM Add DN60 CALL11 Support
310 QSRMAC Change INPMAX to default to 30 streams total
Add INPLOG to default /OUTPUT:(LOG,NOLOG,ERROR)
Change INPOIP to default to 1 (opr intrvn required)
QSRSCH Change INPDEF to use INPLOG to default the /OUTPUT: switch
311 QSRMAC Add a new limit word to the card reader inperpreter .QE
queue. This new field is CNOD which is the node where the
card deck origionated.
312 QSRMAC Remove error DRN - Duplicate Mount Request Name - from
the QUASAR error list.
QSRT20 Remove the code from U$MNT which checks for duplicate
mount request names.
QSRSCH Modify LPTFJB so that if spooling to tape, it skips the
device check
313 QSRMAC Add a new queue for DBMS (DBM)
QSRSCH Add scheduling control vector for DBMS
314 QSRMAC Add %OPRWT to list of Object status codes for DN60
Add error code WFM (waiting for tape/structure mount) for
R.ACE and Co.
QSRT20 Have U$MNT always return through E$WFM.
315 QSRADM Make A$OBST set remote stations which are internally
shutdown show up as IDLE instead of NOT AVAILABLE
QSRDSP Fix a bug in PADLIN so that the correct byte count
is calculated even if the count is negative.
QSRNET Fix a bug so that TOPS-10 603A and non-decnet
TOPS-20 monitors will run. The bug fix is just to
make sure that the central site status bits
are not set to indicate that the node is offline.
QSRQUE Fix a bug - make sure that if a BIN (SPRINT) request
is processed, that no NOTIFY takes place.
316 QSRADM In the DEFINE command processor, start a batch stream for
Emulation.
QSRDSP In the list file archiving code, if the user specified
/ALL, list the archived file name (From .QECON)
QSRT20 In the File Archiving defaulting code, stash the archived
file name in the connected directory area (.EQCON)
317 QSRMAC Add response to setup code %RSUNC for
'Port/Line not conditioned'
Add another word to the network data base for port/line handles
Add another word to the setup message for port/line handles
QSRADM Add code to A$DEFINE so that it generates a handle for
that port/line number by which the front end and spoolers
can identify one another. Use the UDT and save in net DB.
QSRSCH Modify the setup message processor so that it sends the
port/line handle along if setuping up a DN60 remote station
Modify the Response to setup code so that, if the line/port
handles do not match(%RSUNC) we will re-define the port/line
and retry the device setup.
320 QSRDSP Add code to D$DMNT (Show Mount Queues) to support
'INFO MOUNT/USER:xxxx'
*********** Start MDA Modifications/Additions **************
321 QSRMAC Remove the TOPS20 conditional from the MOUNT structures.
QSRT20 Remove The MOUNT message processor from the U$MNT code
and make it D$CMDR to create the MDA MDR queue. Put it
into QSRMDA.
Add I$DFMR to default the system dependent data for the MDR.
QSRDSP Change all MNTQUE references to MDRQUE
QSRMDA Add D$INIT to initialize the MDA system
Add D$CMDR to create an entry in the MDR queue.
322 QSRMAC Change the disk mount block type codes so that they fall in
line with the tape block codes.
Add 2 new block types, .MDNAM, .MDACT for the user
number, the user name, and the users account string.
QSRMDA Add the block processors for the new codes.
323 QSRMAC Impliment Base Level -3 of MDA . Make Mucho changes/refinements
to the MDA structures. Update all the Pictures for all QUASAR
structures. Delete the File Retrieval cancel msg Structure.
QSRT10 Add code for Initialization to build the UCB chain.
Add routine I$OMNT to parse operator mount messages and
send them off to the correct msg processor.
Delete all U$xxxx routines and/or modify them to be I$xxxx.
QSRQUE Make Q$LOGOUT exit through the MDA logout processor D$LOGOUT.
QSRMDA Add mucho code to support base level -3 of MDA. This base level
supports tape mounts (no AVR) and replaces the UMOUNT/OMOUNT
interface for tapes.
QSRDSP Cleanup/fix the tape/disk mount queue display routine to use
the MDA structures.
324 QSRMAC Add Volume status (on-line/offline) message block definitions
325 QSRMAC Delete the file archiving cancel message decsriptions
QSRT20 Delete the code in I$RMCH for matching file archiving
requests since the cancel message is going to look just
like all other cancel messages.
326 QSRMAC Add /NOTE:, /BEGIN:, and /PRIORITY: to the list of short
create blocks.
QSRADM Make D60CND set the IBM node offline. Make A$OSND send
the message if the destination node is an IBM station.
QSRSCH Make RSETUP set an IBM node Online if the setup is %RSUOK.
Make RSETUP set the IBM node offline if the response if
%RSUDE and we were setup prior to getting the response to
setup.
QSRMDA Make some mods to get MDA code running on the -20.
QSRDSP Delete/Change D$SHRT (Show route tables) so that it dumps
the network data base.
Make D$SMNT dump the remarks if /ALL is specified.
Add code for /SCRATCH in D$SMNT.
QSRQUE Add processing routines CRQNTE, CRQBGN, and CRQPRI for new
short create message blocks.
327 QSRT20 Make I$CACV get the user number from the EQ.
Re-arrange some code in I$DFEQ to make sure .EQOID is
defaulted before account validation
330 QSRT20 Fix a bug in the file archiving notification code which
caused a DTL stopcode. Must asve AP across the NSNDIT
subroutine call.
331 QSRMDA Add finishing touches on volume switch support (tape).
Put up latest version for everyone to use.
QSRDSP Add REMARK and LABEL TYPE on tape Q display
332 QSRMAC Add error code CIU.
QSRMDA Fix a bug in MDA Identify code to prevent OPR from identifying
the users current tape as the user next tape in volume switch.
QSRT10 Delete temporary code for setting/clearing DVCMDA.
333 QSRMAC Add new Message type .QOREW for MDA Tape Rewind
QSRMDA Add code to support the new rewind function
QSRT10 Fix a bug (MDA) so that if the device is not available,
we don't lite the AVR bit on startup.
334 QSRMAC Add Error Code ICD, Illegal Connected Directory Specified.
Modify the setup msg block for passing DN60 line conditioning
block
QSRT20 Return Error ICD if Connected directory error
Add a WTO for a File Retrieval Request.
QSRNET Remove IBM check from N$NODE and only return TRUE is online
QSRSCH Re-Work S$RSETUP and remove the old DN60 crocks and add some
new ones
Delete routine CHKNODE and put the node online/offline checking
in the scheduler and the object validation in GETOBJ(QSRADM).
Modify SETUP to pass a correct DN60 line conditioning block
to the spoolers.
QSRADM Delete the DN60 line conditioning routines (They're moving to
the spoolers) and re-work the DN60 support code.
Add some more object validation to GETOBJ.
QSRMDA Move the PUSHJ P,UNLOAD from CHKVOL to the device status msg
processing routine.
335 QSRMAC Expand the node went away message so that we can stuff the
port,,line number in .OFLAG and lite %ONLINE in .MSFLG to
make it a Node Online Message.
QSRADM Add code in KILPSB so that if we are killing a processor for
an IBM remote, we set the node offline
QSRNET Add entry points N$NONL (online) and N$NOFF (offline) for IBM
online/offline processing. Have it send a node-went-away or
node-came-online message to Orion.
QSRSCH Make the RSETUP routines call N$NONL & N$NOFF for IBM remotes.
336 QSRMAC Add .FPF8B for 8 bit files
QSRSCH Add DN60 Node offline call to the shutdown code.
Also, send the setup msg to DN60 devices regardless of
requests in the queue.
QSRADM Delete the code to set an IBM node offline in SHUTDOWN NODE
337 QSRDSP Add support to the show status processor for the emulation
spooler. If the emulation spooler is running, send the status
message to it so that it can generate the ack back to the OPR.
340 QSRT10 Modify I$IPS so that it works the same on both the -10 and
-20. That is, if the message being sent is greater then the
maximum packet size, then allow it to be sent anyway. We
did this by allocating a page for the message and sending
a page instead of a packet. This allows for GALAXY debugging
where IP.CFL would not.
341 QSRSCH TOPS20 QAR (20-00605) Delete the spooling to tape check
in OUTFJB.
342 QSRADM Add DN60 Signon support to DEFINE and SET NODE commands.
QSRMAC Add Node Status Bit NETSGN for Node Signon Required.
QSRDSP Modify D$NPRM to display Signon Required info
343 QSRMAC Add a new status bit to the EQ for account validation required.
Delete OBJECT status bit OBSAVW.
QSRT10 Start adding code to support disk units in MDA. Build the
UCB's and VOL's for disk drives in I$INIT.
Make I$SACV always return true.
QSRSCH Delete the JUMPF .RETF following the call to I$SACV
in NEXTJB.
Delete the JUMPF SCHD.4 following the PUSHJ P,SCHSCH(P2)
in SCHD.2
Change the PUSHJ P,EQDFLT at BINDEF to PUSHJ P,INPDEF
QSRNET In N$NONL, change the check for .OTIBM to .OTBAT
Also, only send the Node online/node offline message to
ORION if the node is termination
QSRADM In A$HELLO, $LOG the processor signon event.
In KILPSB, $LOG the deletion of a PSB.
QUASAR Add support for account validation response from ACTDAE,
so that we dispatch to the correct routine.
344 QSRSCH Add OBSSIP to S$SHUT code to check if setup in progress for
shutting down an object
QSRADM Add OBSSIP to A$SHUT to check for setup in progress when
shutting down an object
QSRDSP Remove label type from /ALL Mount Queue Listing
345 QSRADM Change A$OSHT to remove the OBSSIP bit check added above.
Instead, make A$OSHT call S$SHUT to shut down the object.
Also, change SHUTNO to call S$SHUT to shut down an object.
QSRT20 Zero the VL.SCR (chkp.5-2) bit if MOUNTR passes back a
Volume ID
346 QSRSCH Add a hack (should be removed asap) to correct a problem
in BINDEF where the CNOD limit word can get trashed by
the call to INPDEF. Save the CNOD limit word across the call.
347 QSRT20 Modify I$AGE so that it always returns a value. If the
calculated time difference is 0, then return 1 second.
QSRT10 Same as Above.
350 QSRT20 Change the file archiving message processor so that it fills
in the node name in the ROB and includes the object block in
the $WTO that gets sent to the OPR. This will enable an
operator to screen out file retrieval messages.
\ ;End Of Revision History
SUBTTL Accumulator Definitions
AP==13 ;ARGUMENTS FOR ALL M$xxxx ROUTINES
E==14 ;QUEUE ENTRY POINTER
H==15 ;QUEUE HEADER POINTER
M==16 ;MESSAGE POINTER
SUBTTL Symbols derived from GALCNF
; DEFINE FEATURE TESTS SO THAT EACH MODULE NEED ONLY SEARCH QSRMAC
XP FTRQUE,FTRQUE ; ON = KEEP A REDUNDANT MASTER QUEUE
XP FTRJE,FTRJE ; ON = ADD RJE SUPPORT TO SPOOLERS
XP FTDN60,FTDN60 ; ON = ADD DN60 SUPPORT TO SPOOLERS
; DEFINE BATCH JOB PARAMETERS
XP INPMAX,^D30 ;DEFAULT MAX BATCH STREAMS STARTED.
XP INPTIM,G.ITIM ;DEFAULT BATCH JOB TIME LIMIT
XP INPCOR,G.ICOR ;DEFAULT BATCH JOB CORE LIMIT
XP INPPGS,G.ILPT ;DEFAULT PAGE LIMIT
XP INPCDS,G.ICDP ;DEFAULT PUNCHED CARD LIMIT
XP INPPTP,G.IPTP ;DEFAULT PAPER TAPE LIMIT
XP INPPLT,G.IPLT ;DEFAULT PLOTTER TIME
XP INPOIP,1 ;OPERATOR INTERVENTION PARAMETER
XP INPLOG,G.ILOG ;BATCH /OUTPUT: DEFAULT
; DEFINE SPOOLING SYSTEM PARAMETERS
XP SPLPRI,G.DPRI ;PRIORITY FOR SPOOLED REQUESTS
XP MXUPRI,G.SPRI ;MAXIMUM USER PRIORITY
XP SPLMBC,G.NMBC ;NUMBER OF MINUTES BETWEEN CHECKPOINTS
XP FRMNOR,G.DNOR ;NAME OF "NORMAL" FORMS
XP FRMUNI,G.DNUC ;NUMBER OF UNIQUE CHARACTERS IN THE NAME
XP FLEACT,G.FLEA ;FORMS LIMIT EXCEEDED ACTION
FRMSK1==MASK.(6*FRMUNI,6*FRMUNI-1) ;ANDX, LOAD MASK
FRMSK2==MASK.(^D36-6*FRMUNI,^D35) ;TXZ STYLE MASK
XP LPTDIV,G.LPTD ;DIVISOR FOR CNVRTNG DSK BLKS TO PAGES
XP LPTMUL,G.LPTM ;MULTIPR FOR CNVRTNG DSK BLKS TO PAGES
XP CDPDIV,G.CDPD ;DIVISOR FOR CNVRTNG DSK BLKS TO CARDS
XP CDPMUL,G.CDPM ;MULTIPR FOR CNVRTNG DSK BLKS TO CARDS
XP PTPDIV,G.PTPD ;DIVISOR FOR CNVRTNG DSK BLKS TO FEET
XP PTPMUL,G.PTPM ;MULTIPR FOR CNVRTNG DSK BLKS TO FEET
XP PLTDIV,G.PLTD ;DIVISOR FOR CNVRTNG DSK BLKS TO FEET
XP PLTMUL,G.PLTM ;MULTIPR FOR CNVRTNG DSK BLKS TO FEET
;FAILSOFT SYSTEM PARAMETERS
XP FSSSTR,G.QSTR ;FILE-STRUCTURE FOR MASTER QUEUES
SUBTTL Changable System Parameters
DEFINE PARAM(SYM,VAL,MIN,MAX),<
IFDEF SYM,<
IFL <SYM-MIN>,<PRINTX VALUE OF SYM IS TOO SMALL>
IFG <SYM-MAX>,<PRINTX VALUE OF SYM IS TOO LARGE>
> ;END IFDEF SYM
IFNDEF SYM,<SYM==VAL>
> ;END DEFINE PARAM
PARAM(EQLMSZ,6,1,20) ;EQ LIMITS WORDS
PARAM(EQCKSZ,5,5,200) ;SIZE OF REQUEST CHECKPOINT AREA
SYSPRM EQNMSZ,2,10 ;.EQOWN SIZE IN WORDS
SYSPRM VSNLEN,10,2 ;VOLUME SET NAME LENGTH IN WORDS
PARAM(STSSIZ,21,21,200) ;SIZE OF STATUS AREA IN OBJ AND CHKPNT
PARAM(TIMONA,3,1,74) ;MINUTES TO WAIT FOR OBJ NOT AVAIL
PARAM(OBPRSZ,5,5,200) ;NUMBER OF WORDS OF OBJECT PARAMS
SUBTTL Abbreviations Used in QUASAR-10
COMMENT \
Abbreviation Meaning
------------ -------
ITN Internal Task Name
PDB Packet Data Block (for IPCF)
PSB Program Status Block
RQP Relative Queue Pointer
NJP Number of Jobs being Processed
DPA Disk Page Address
IDS Internal Device Specifier
CSM Canonical SPOOL Message
CLM Canonical LOGOUT Message
RDB Request Descriptor Block
\
SUBTTL RDB -- Request Descriptor Block
;THE REQUEST DESCRIPTOR BLOCK IS THE DATA-STRUCTURE USED TO REPRESENT
; A REQUEST OR SET OF REQUESTS. IT CONSISTS OF A JOBNAME WITH
; WILDCARDS AND A POSITIVE MASK, A SEQUENCE NUMBER (WHICH IF 0
; IMPLIES ALL JOBS WHICH FIT THE REST OF THE CRITERIA), AND AN
; OPERATING SYSTEM DEPENDENT OWNER SPECIFIER WITH WILDCARDS.
; !-------------------------------------------------------!
; ! SPECIFIED JOB NAME !
; !-------------------------------------------------------!
; ! JOB NAME MASK !
; !-------------------------------------------------------!
; ! EXTERNAL SEQUENCE NUMBER !
; !-------------------------------------------------------!
; ! REQUEST ID NUMBER !
; !-------------------------------------------------------!
;
; ----- TOPS10 -----
; ! !
; !-------------------------------------------------------!
; ! OWNER IDENTIFICATION (PPN) !
; !-------------------------------------------------------!
; ! OWNER ID MASK !
; !-------------------------------------------------------!
;
; ----- TOPS20 -----
; ! !
; !-------------------------------------------------------!
; ! !
; / SPECIFICATION OF REQUEST OWNER /
; / /
; / /
; ! !
; !=======================================================!
PHASE 0
.RDBJB:! BLOCK 1 ;JOB NAME (SIXBIT)
.RDBJM:! BLOCK 1 ;JOB NAME MASK
.RDBES:! BLOCK 1 ;EXTERNAL SEQUENCE NUMBER
.RDBRQ:! BLOCK 1 ;REQUEST ID NUMBER
TOPS10 <
.RDBOI:! BLOCK 1 ;OWNER ID
.RDBOM:! BLOCK 1 ;OWNER ID MASK
> ;END TOPS10 CONDITIONAL
TOPS20 <
.RDBOW:! BLOCK 10 ;REQUEST OWNER SPEC
> ;END TOPS20 CONDITIONAL
RDBSIZ:!
DEPHASE
SUBTTL ROB -- Requested Object Block
;The ROB is used in any context where an object and
; some attributes (or a particular object) must be specified.
; !=======================================================!
; ! OBJECT TYPE !
; !-------------------------------------------------------!
; ! DEVICE ATTRIBUTES ! PHYSICAL UNIT NUMBER !
; !-------------------------------------------------------!
; ! NODE NAME !
; !-------------------------------------------------------!
; ! CUSTOMER DEFINED ATTRIBUTES !
; !=======================================================!
PHASE 0
.ROBTY:! BLOCK 1 ;OBJECT TYPE
.ROBAT:! BLOCK 1 ;ATTRIBUTES (DEC)
RO.PHY==1B0 ;PHYSICAL UNIT SPECIFIED
RO.ATR==-1,,0 ;DEVICE ATTRIBUTES (SHORT CREATE ONLY)
%LOWER==1 ;LOWER CASE DEVICE (SHORT CREATE ONLY)
%UPPER==2 ;UPPER CASE DEVICE (SHORT CREATE ONLY)
%PHYCL==3 ;PHYSICAL DEVICE (SHORT CREATE ONLY)
%GENRC==4 ;GENERIC DEVICE (SHORT CREATE ONLY)
RO.UNI==0,,-1 ;PHYSICAL UNIT NUMBER
;OTHER ATTRIBUTES ARE DEFINED
; WITH THE OBJ DEFINITIONS
.ROBND:! BLOCK 1 ;NODE NAME
.ROBUA:! BLOCK 1 ;CUSTOMER DEFINED ATTRIBUTES
ROBSIZ:!
DEPHASE
SUBTTL DIB -- Dependency Information Block
;Each job has a Dependency List associated with it. Each entry in the
; list is a DIB which describes one dependency which the job has.
PHASE 0
.DIBDS:! BLOCK 1 ;DEPENDENCY STATUS
DI.SAT==1B0 ;SATISFIED LAST PASS (FOR LIST MOSTLY)
DI.TYP==0,,-1 ;DEPENDENCY TYPE
.DIBDT:! BLOCK 1 ;DEPENDENCY DATA
DIBSIZ:!
DEPHASE
;Currently defined dependencies
; Symbol Value Data
; ------ ----- -------------------------------
.DTSTR== 1 ;Adr of STR queue entry for structure
SUBTTL QH -- Queue Header Definitions
; !=======================================================!
; ! QUEUE NAME ! FLAGS ! QUEUE TYPE !
; ! 3 SIXBIT CHARACTERS ! ! !
; !-------------------------------------------------------!
; ! POINTER TO LAST ! POINTER TO FIRST !
; ! ENTRY IN THIS QUEUE ! ENTRY IN THIS QUEUE !
; !-------------------------------------------------------!
; ! BASE OF SCHEDULING ! SIZE OF AN !# OF LIST PGS!
; ! AND LINKING ALGORITHM ! ENTRY ! LAST TIME !
; !-------------------------------------------------------!
; ! PTR TO FIRST ENTRY ! PTR TO LAST ENTRY !
; !-------------------------------------------------------!
; ! SIZE OF EACH ENTRY !
; !=======================================================!
PHASE 0
.QHTYP:! BLOCK 1 ;QUEUE TYPE WORD
QH.NAM==-1,,0 ;3 CHARACTER QUE NAME
QH.FLG==777B26 ;FLAGS
QH.IPC==1B18 ;QUEUE FOR IPCF, ADD IN G$MPS TO SIZE
QH.INV==1B19 ;OBJECT IS INVISIBLE
QH.TYP==777B35 ;QUEUE TYPE
.QHTQS==0 ;INTERNAL TO QUASAR
.QHTOU==1 ;AN OUTPUT QUEUE
.QHTIP==2 ;AN INPUT QUEUE
.QHTMD==3 ;MOUNTABLE DEVICE QUEUE
.QHFRR==4 ;FREE RUNNING DEVICE QUEUE
.QHTAR==5 ;ARCHIVE SYSTEM QUEUE
.QHLNK:! BLOCK 1 ;LINK WORD
QH.PTL==-1,,0 ;POINTER TO LAST ENTRY
QH.PTF==0,,-1 ;POINTER TO FIRST ENTRY
.QHPAG:! BLOCK 1 ;STORAGE INFORMATION
QH.SCH==-1,,0 ;SCHEDULER ENTRY VECTOR
SCHLNK==0 ; LINK IN
SCHSCH==1 ; SCHEDULE
SCHDEF==2 ; FILL IN DEFAULTS FOR CREATE
SCHMOD==3 ; PREFORM QUEUE DEPENDENT MODIFY
SCHRJI==4 ; RELEASE JOB-OBJECT INTERLOCK
SCHFJB==5 ; FIND A JOB FOR AN OBJECT
QH.SIZ==777B26 ;SIZE OF EACH ENTRY
.QHLIS:! BLOCK 1 ;LIST FLAG (LIQxxx)
.QHAFT:! BLOCK 1 ;AFTER TIME OF BEST AFTER JOB
QHSIZE:! ;SIZE OF A QUEUE HEADER
DEPHASE
SUBTTL QE -- Queue Entry Definitions
; !=======================================================!
; ! LINK TO PREVIOUS ! LINK TO NEXT !
; ! 0 IF THIS IS THE FIRST ! 0 IF THIS IS THE FIRST !
; !=======================================================!
; ! CREATION TIME OF ENTRY (INTERNAL DATE/TIME FORMAT) !
; !-------------------------------------------------------!
; ! POINTER TO OBJECT QUEUE ENTRY FOR THIS REQ !
; !-------------------------------------------------------!
; ! INTERNAL TASK NAME !
; !-------------------------------------------------------!
; / /
; / REQUESTED OBJECT BLOCK /
; / /
; !-------------------------------------------------------!
; / /
; / JOB INFORMATION BLOCK /
; / /
; !-------------------------------------------------------!
; ! ! DEPENDENCY LIST NUMBER !
; !-------------------------------------------------------!
; ! ENTRANCE PRIORITY !
; !-------------------------------------------------------!
; ! THE PROTECTION FIELD ! !
; !-------------------------------------------------------!
; ! DEADLINE PARAMETER (INTERNAL DATE/TIME FORMAT) !
; !-------------------------------------------------------!
; ! !
; ! REQUEST LIMIT INFORMATION !
; ! CONTENTS ARE QUEUE DEPENDENT !
; ! 5 WORDS !
; ! !
; !-------------------------------------------------------!
; ! NOTIFY ID !
; !-------------------------------------------------------!
; ! BATCH JOB NUMBER ! USER'S JOB NUMBER !
; !-------------------------------------------------------!
; ! DISK PAGE ADDRESS ! !
; !-------------------------------------------------------!
;
; ! ----- TOPS 20 ----- !
; ! !
; !-------------------------------------------------------!
; ! OWNER (LOGGED IN USER) !
; ! (10 WORDS) !
; !-------------------------------------------------------!
; ! CREATOR'S CONNECTED DIRECTORY !
; ! (12 WORDS) !
; !=======================================================!
PHASE 0
.QELNK:! BLOCK 1 ;LINK WORD
QE.PTP==-1,,0 ;POINTER TO PREVIOUS ENTRY
QE.PTN==0,,-1 ;POINTER TO NEXT ENTRY
QEHSIZ:! ;SIZE OF QUEUE-ENTRY-HEADER
.QECRE:! BLOCK 1 ;INTERNAL CREATION TIME OF THIS ENTRY
.QEOBJ:! BLOCK 1 ;POINTER TO OBJECT SERVICING THIS REQUEST
.QEITN:! BLOCK 1 ;INTERNAL TASK NAME
QE.AVO==770000,,00 ;ACCT VALIDATION OBJECT TYPE (-10 ONLY)
QE.AVI==007777,,-1 ;ACCT VALIDATION ITN (-10 ONLY)
.QEROB:! BLOCK ROBSIZ ;REQUESTED OBJECT BLOCK
.QEJBB:! BLOCK JIBSIZ ;JOB INFORMATION BLOCK
.QEDIN:! BLOCK 1 ;DEPENDENCY INFORMATION
QE.DLN==0,,-1 ;DEPENDENCY LIST NUMBER
.QEIPR:! BLOCK 1 ;ENTRANCE PRIORITY FOR THIS ENTRY
.QEPRT:! BLOCK 1 ;REQUEST PROTECTION
QE.PRO==-1,,0 ;THE PROTECTION FIELD
.QEDED:! BLOCK 1 ;DEADLINE PARAMETER
.QELIM:! BLOCK EQLMSZ ;LIMITS WORDS
.QENID:! BLOCK 1 ;/NOTIFY ID (LOGIN TIME, PID, DIRECTRY NBR)
.QEJBN:! BLOCK 1 ;JOB NUMBERS (For /NOTIFY)
QE.UJN==0,,-1 ;USERS JOB NUMBER (ORIGIONAL JOB NUMBER)
QE.BJN==-1,,0 ;BATCH JOB NUMBER
.QESTN:! BLOCK 1 ;REMOTE INFORMATION
QE.DPA==-1,,0 ;DISK PAGE ADDRESS
TOPS20 <
.QEOWN:! BLOCK 10 ;REQUEST OWNER
.QECON:! BLOCK 12 ;CONNECTED DIRECTORY
> ;END TOPS20
QNTSIZ:! ;SIZE OF THE QUEUE ENTRY
SUBTTL JOB INFORMATION BLOCK (.QEJBB) DESCRIPTION
.QEJOB==.QEJBB+JIB.JN ;EXTERNAL JOB NAME
.QESEQ==.QEJBB+JIB.SQ ;EXTERNAL VALUES
QE.SEQ==-1,,0 ;EXTERNAL SEQUENCE NUMBER
QE.ACT==1B21 ;REQUEST REQUIRES ACCOUNT VALIDATION
QE.IAS==1B22 ;REQUEST CONTAINS IN INVALID ACCT STRING
QE.NOT==3B24 ;JOB REQUESTED /NOTIFY
%NOTTY==1 ;NOTIFY VIA USERS TTY
%notml==2 ;NOTIFY USER VIA MAIL
%notjb==3 ;NOTIFY USERS JOB
QE.JBC==1B25 ;JOB HAS BEEN CHECKPOINTED
QE.HBO==1B26 ;JOB HELD BY OPERATOR
QE.PRV==1B27 ;REQUEST CREATOR WAS PRIVILEGED
QE.SPL==1B28 ;THIS REQUEST CONTAINS SPOOLED FILES
QE.RDE==1B29 ;THIS REQUEST DOESN'T EXIST (CLEAN-UP)
QE.PRI==77B35 ;EXTERNAL PRIORITY
.QEOID==.QEJBB+JIB.US ;OWNER IDENTIFIER
.QERID==.QEJBB+JIB.ID ;REQUEST ID.
TOPS10 <
.QEUSR==.QEJBB+JIB.NM ;USER'S NAME (2 WORDS)
>
DEPHASE
SUBTTL OBJ -- Object Queue
;For each object on the system, known to QUASAR, an entry in the OBJ queue
; is made. This queue is used for scheduling and for interfacing with
; the operator control.
; !=======================================================!
; ! Object type code !
; !-------------------------------------------------------!
; ! Unit number of this type !
; !-------------------------------------------------------!
; ! Node name in SIXBIT !
; !-------------------------------------------------------!
; ! PID which has object setup !
; !-------------------------------------------------------!
; ! ITN of request currently on OBJect !
; !-------------------------------------------------------!
; !SCHEDULER STATE INFORMATION! QUEUE HEADER FOR OBJECT !
; !-------------------------------------------------------!
; ! OBJect Timer Word !
; !-------------------------------------------------------!
; ! OBJect Attributes (DEC defined) !
; !-------------------------------------------------------!
; ! OBJect Attributes (Customer defined) !
; !-------------------------------------------------------!
; \ 5 Word Object specific parameter \
; \ area \
; !-------------------------------------------------------!
; ! CURRENT DEVICE STATUS CODE !
; ! (FILLED IN BY QUASAR, UPDATED BY SPOOLER) !
; !-------------------------------------------------------!
; \ Current status, expressed \
; \ in as an ASCIZ string \
; !=======================================================!
;Define a macro which will allow a mapping between an object type
; and various object-type specific data like the queue in
; which jobs for that object reside, initial object parameters
; etc.
;
;Format for each line is:
; X obj,que,<p1,p2,p3,p4,p5>
;
;where obj is the object type specified as the XXX in .OTXXX
; que is the queue in which jobs reside for this object
; p1 - p5 are the initial contents of the 5 parameter
; words when an object entry is created.
; These are a single macro argument.
DEFINE MAPOBJ,<
X BAT,INP,<<1,,77>,<0,,^D3600>,0,<INPOIP,,0>,<1,,^D512>>
X LPT,LPT,<<1,,77>,<1,,^D500>,<FRMNOR>,<FLEACT,,0>,0>
X PTP,PTP,<<1,,77>,<1,,^D500>,<FRMNOR>,<FLEACT,,0>,0>
X CDP,CDP,<<1,,77>,<1,,^D500>,<FRMNOR>,<FLEACT,,0>,0>
X PLT,PLT,<<1,,77>,<1,,^D500>,<FRMNOR>,<FLEACT,,0>,0>
X RDR,RDR,<0,0,0,0,0>
X BIN,BIN,<0,0,0,0,0>
X DBM,DBM,<0,0,0,0,0>
TOPS20 <
X XFR,XFR,<0,0,0,0,0>
X RET,RET,<0,0,0,0,0>
X NOT,NOT,<0,0,0,0,0>
> ;END TOPS20
> ;END DEFINE MAPOBJ
;OBJ definitions are on the following page
PHASE QEHSIZ ;APPEND TO QUEUE ENTRY HEADER
OBJTYP:! BLOCK 1 ;OBJECT TYPE
OBJUNI:! BLOCK 1 ;UNIT NUMBER OF THIS TYPE
OBJNOD:! BLOCK 1 ;NODE THAT THIS UNIT IS ON
OBJPID:! BLOCK 1 ;PID WHICH HAS THIS OBJ SETUP
OBJITN:! BLOCK 1 ;ITN OF CURRENT REQUEST ON OBJECT
OBJSCH:! BLOCK 1 ;SCHEDULER STATE INFORMATION
OBSSTA==1B0 ;OBJECT IS STARTED
OBSSUP==1B1 ;OBJECT IS SETUP
OBSBUS==1B2 ;OBJECT IS BUSY
OBSSIP==1B3 ;SETUP IN PROGRESS
OBSIGN==1B4 ;IGNORE THIS FOR A WHILE
OBSDAA==1B5 ;DEVICE (DEC) ATTRIBUTES AVAILABLE
OBSSEJ==1B6 ;SHUTDOWN AT END-OF-JOB
OBSINV==1B7 ;OBJECT IS INVISIBLE
OBSINT==1B8 ;DO AN INTERNAL SHTDWN WHEN QUEUE EMPTYS
OBSHUT==1B9 ;OBJECT IS INTERNALLY SHUTDOWN
OBSFRR==1B10 ;A FREE RUNNING DEVICE.
OBSSTP==1B11 ;STOPPED BY THE OPERATOR
OBSSPL==1B13 ;OBJECT IS SPOOLING TO TAPE
OBSQUH==0,,-1 ;ADDRESS OF QUEUE HEADER FOR OBJECT
OBJTIM:! BLOCK 1 ;OBJECT TIMER
OBJDAT:! BLOCK 1 ;DEC-DEFINED ATTRIBUTES
OBJCAT:! BLOCK 1 ;CUSTOMER-DEFINED ATTRIBUTES
OBJPRM:! BLOCK OBPRSZ ;DEPENDENT PARAMETERS
OBJSTS:! BLOCK 1 ;CURRENT DEVICE STATUS CODE
;FILLED IN BY QUASAR, UPDTED BY SPOOLER
OBJST1:! BLOCK STSSIZ ;CURRENT JOB STATUS IN ASCIZ
;UPDATED BY THE SPOOLER
OBJSIZ:! ;SIZE OF AN OBJ QUEUE ENTRY
;DEFINITIONS OF WORDS WITHIN THE OBJPRM BLOCK
;COMMON MASKS
OBPMIN==-1,,0 ;MINIMUM VALUE
OBPMAX==0,,-1 ;MAXIMUM VALUE
;OUTPUT PARAMETERS (PRINTERS, PAPERTAPE, CARDPUNCH, PLOTTER)
.OOPRI==0 ;MIN AND MAX EXTERNAL PRIORITY
.OOLIM==1 ;MIN AND MAX OUTPUT LIMITS
.OOFRM==2 ;FORMS TYPE
.OOFLG==3 ;OUTPUT FLAGS
.OFLEA==-1,,0 ;FORMS LIMIT EXCEEDED ACTION
.OOTAP==4 ;SIXBIT DEVICE NAME FOR SPOOLING TO TAPE
;CONTINUED FROM THE PREVIOUS PAGE
;BATCH-STREAM PARAMETERS
.OBPRI==0 ;MIN AND MAX EXTERNAL PRIORITY
.OBTIM==1 ;MIN AND MAX RUNTIME LIMITS
.OBFLG==3 ;BATCH STREAM FLAGS
.OPRIN==-1,,0 ;OPERATOR INTERVENTION FLAG
.OPINY==1 ;ALLOW OPERATOR INTERVENTION JOBS
.OPINN==2 ;NO OPERATOR INTERVENTION JOBS
.OBCOR==4 ;MIN AND MAX CORE LIMITS
;Retrieve-stream parameters
.OBSTM==0 ;Time stamp and flag
.OBTAP==1 ;Tape ID
.OBSSN==2 ;Saveset,,tape file #
OB.SSN==-1,,0 ;Saveset
OB.TFN==0,,-1 ;Tape file number
;OBJECT ATTRIBUTES (DEC)
; (RESERVE BIT 0 FOR "PHYSICAL UNIT" SPECIFICATION BY THE USER)
;PRINTERS
OBDLLC==1B1 ;LOWERCASE PRINTER
OBDLUC==1B2 ;UPPERCASE PRINTER
DEFINE STATUS,<
XLIST
X <Invalid>,%INVLD,100
X <Idle>,%IDLE,0
X <Active>,%ACTIV,0
X <Stopped>,%STOPD,0
X <Not Started>,%NSTRT,0
X <Not Available>,%NAVAL,0
X <No Ptys>,%NPTYS,.OTBAT
X <Offline>,%OFLNE,<.OTLPT,.OTPTP,.OTCDP,.OTPLT,.OTRDR>
X <System Full>,%SFULL,.OTBAT
X <Shutting Down>,%SHTDN,0
X <Aborting>,%CNCLG,0
X <Opr Resp Wait>,%OREWT,0
X <Aligning Forms>,%ALIGN,.OTLPT
X <>,%RESET,0
X <Reading>,%READN,.OTRDR
X <Requeing>,%REQUE,0
X <Shutting Down>,%SHUTD,0
X <Opr Output Wait>,%OPRWT,.OTLPT
LIST
> ;END STATUS MACRO
XXXX==0
DEFINE X(A,SYM,VAL),<
SYM==XXXX
XXXX==XXXX+1
>
;DEFINE THE OBJECT STATUS CODES
STATUS
;DEFINE THE HIGHEST STATUS CODE
%STMAX==XXXX-1
SUBTTL PSB -- Processor Status Block
; !=======================================================!
; \ \
; \ The Queue Entry Header \
; \ \
; !=======================================================!
; ! Process ID (PID) !
; !-------------------------------------------------------!
; ! Program Name !
; !-------------------------------------------------------!
; ! Current number of jobs ! Maximum number of jobs !
; !-------------------------------------------------------!
; ! Flags ! Number of OBJect types !
; !-------------------------------------------------------!
; ! !
; \ List of object types \
; \ \
; \ Maximum of 5 types \
; ! !
; !=======================================================!
PHASE QEHSIZ ;APPEND TO THE QUEUE ENTRY HEADER
PSBPID:! BLOCK 1 ;PROGRAM'S PID
PSBNAM:! BLOCK 1 ;PROGRAM NAME
PSBLIM:! BLOCK 1 ;CURRENT AND MAX NUMBER OF JOBS
PSLCUR==-1,,0 ;CURRENT NUMBER OF JOBS
PSLMAX==0,,-1 ;MAXIMUM NUMBER OF JOBS
PSBFLG:! BLOCK 1 ;FLAGS AND NUMBER OF OBJ TYPES
PSFNOT==0,,-1 ;NUMBER OF OBJECT TYPES
PSBOBJ:! BLOCK OBPRSZ ;LIST OF OBJECTS (UP TO OBPRSZ)
PSBSIZ:! ;SIZE OF A PSB
DEPHASE
SUBTTL SPL -- Spool Queue Definition
; !=======================================================!
; / /
; / THE QUEUE ENTRY HEADER /
; / /
; !=======================================================!
; \ \
; \ REQUESTED OBJECT BLOCK \
; \ \
; !-------------------------------------------------------!
; ! JOB NUMBER ! RETRIEVAL POINTER !
; !-------------------------------------------------------!
; ! FORMS TYPE !
; !-------------------------------------------------------!
; ! AFTER PARAMETER !
; !-------------------------------------------------------!
; ! NOTE FIELD !
; ! (2 WORDS) !
; !-------------------------------------------------------!
; ! ! REQUEST LENGTH !
; !=======================================================!
PHASE QEHSIZ ;APPEND TO THE QUEUE ENTRY HEADER
SPLOID:! BLOCK 1 ;OWNER'S ID
SPLROB:! BLOCK ROBSIZ ;REQUESTED OBJECT BLOCK
SPLJOB:! BLOCK 1 ;JOB INFORMATION
SPYJOB==-1,,0 ;THE JOB NUMBER
SPYDPA==0,,-1 ;THE RETRIEVAL POINTER
SPLFRM:! BLOCK 1 ;FORMS TYPE
SPLAFT:! BLOCK 1 ;AFTER PARAMETER
SPLNOT:! BLOCK 2 ;NOTE FIELD
SPLRQZ:! BLOCK 1 ;SIZE OF CURRENT REQUEST
SPYLEN==0,,-1 ;THE LENGTH (FROM .MSTYP)
SPLSIZ:! ;SIZE OF THE SPOOL QUEUE ENTRIES
DEPHASE
;DURING Q$FSPL, THE SPL QUEUE IS SCANNED TO COMPRESS MULTIPLE SPOOL REQUESTS INTO A
; SINGLE REQUEST. THE FOLLOWING DECISIONS ARE MADE WITH THE INPUT BEING
; THE CURRENT SPOOL MESSAGE FROM THE MONITOR AND THAT QUEUE AND STATION TESTS
; HAVE SUCCEEDED.
; INPUT CURRENT QUEUE ACTION
; STN. GENERIC STN. GENERIC APPEND
; REAL DEVICE STN. GENERIC APPEND AND CHANGE TO REAL DEVICE
; LL:/LU: STN. GENERIC APPEND AND CHANGE TO LL: OR LU:
; STN. GENERIC REAL DEVICE APPEND
; REAL DEVICE REAL DEVICE APPEND IF DEVICES MATCH
; LL:/LU: REAL DEVICE NEVER APPEND
; STN. GENERIC LL:/LU: APPEND
; REAL DEVICE LL:/LU: NEVER APPEND
; LL:/LU: LL:/LU: APPEND IF BOTH FOR LL: OR FOR LU:
SUBTTL STR -- Structure Queue Definition
PHASE QEHSIZ ;APPEND TO QUEUE ENTRY HEADER
IFN FTUUOS,<
STRNAM:! BLOCK 2 ;STRUCTURE NAME
> ;END IFN FTUUOS
IFN FTJSYS,<
STRNAM:! BLOCK ^D16 ;STRUCTURE NAME (TOPS-20) MAX 79 CHARS
> ;END IFN FTJSYS
STRSTS:! BLOCK 1 ;STRUCTURE STATUS
STSSSV==1B0 ;STRUCTURE STATUS VALID
STSONL==1B1 ;STRUCTURE IS ONLINE
STRSIZ:! ;SIZE OF THE STR QUEUE ENTRY
DEPHASE
SUBTTL NETWORK DATA BASE STRUCTURE
; !=======================================================!
; / /
; / THE QUEUE ENTRY HEADER /
; / /
; !-------------------------------------------------------!
; ! SIXBIT NODE (NETWORK) NAME !
; !-------------------------------------------------------!
; ! NODE (NETWORK) NUMBER !
; !-------------------------------------------------------!
; ! ONLINE/OFFLINE STATUS !
; !-------------------------------------------------------!
; ! ROUTE ENTRY NAME !
; !-------------------------------------------------------!
; \ \
; \ ASCIZ NETWORK NODE NAME \
; \ \
; !-------------------------------------------------------!
; ! CLEAR TO SEND DELAY !
; !-------------------------------------------------------!
; ! RECORDS PER MESSAGE !
; !-------------------------------------------------------!
; ! BYTES PER MESSAGE !
; !-------------------------------------------------------!
; ! SILO WARNING LEVEL !
; !-------------------------------------------------------!
; ! NODE PORT NUMBER ! NODE LINE NUMBER !
; !-------------------------------------------------------!
; ! PORT/LINE HANDLE (FOR DN60 FRONT END) !
; !=======================================================!
PHASE QEHSIZ
TOPS20 <
NETCOL:! ;-20 COLLATING SEQ BY NAME
> ;END TOPS20 CONDITIONAL
NETNAM:! BLOCK 1 ;SIXBIT NODE NAME
TOPS10 <
NETCOL:! ;-10 COLLATING SEQ BY NUMBER
> ;END TOPS10 CONDITIONAL
NETNBR:! BLOCK 1 ;NODE NUMBER
NETSTS:! BLOCK 1 ;FLAG WORD
NT.FLG==770000,,0 ;NETWORK FLAG BITS
NETNSV==1B0 ; ONLINE/OFFLINE STATUS BIT IS VALID
NETONL==1B1 ; ONLINE
NETADD==1B2 ; THIS NODE ADDED LAST PASS
NETIBM==1B3 ; NODE IS DN60 DRIVEN
NETSHT==1B4 ; NETWORK SHUTDOWN IS IN PROGRESS
NETSGN==1B5 ; NODE REQUIRES SIGNON PROCESSING
NT.TYP==7000,,0 ;NETWORK TYPE
DF.DEC==0 ; 'DEC' NODE
DF.378==1 ; 3780 NODE
DF.278==2 ; 2780 NODE
DF.HSP==3 ; HASP NODE
NT.MOD==700,,0 ;NETWORK MODE
DF.TRM==1 ; TERMINATION MODE
DF.EMU==2 ; EMULATION MODE
NT.TOU==70,,0 ;PROTOCOL TIMEOUT CATAGORY
ST.PRI==1 ; PRIMARY
ST.SEC==2 ; SECONDARY
NT.DTR==7,,0 ;DATA TERMINAL READY
ST.ON==1 ; ON
ST.OFF==2 ; OFF
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
NT.TRA==700000 ;TRANSPARENCY
; ST.ON==1 ; ON
; ST.OFF==2 ; OFF
NT.XTA==77777 ;EXTRA BITS
NETRTE:! BLOCK 1 ;ROUTE ENTRY NAME
NETASC:! BLOCK 3 ;ASCIZ NETWORK NODE NAME
NETCSD:! BLOCK 1 ;CLEAR TO SEND DELAY
NETRPM:! BLOCK 1 ;RECORDS PER MESSAGE
NETBPM:! BLOCK 1 ;BYTES PER MESSAGE
NETSWL:! BLOCK 1 ;SILO WARNING LEVEL
NETPTL:! BLOCK 1 ;PORT,,LINE NUMBER
NT.PRT==-1,,0 ;NODE PORT NUMBER
NT.LIN==0,,-1 ;NODE LINE NUMBER
NETIDN:! BLOCK 1 ;PORT/LINE HANDLE (FOR DN60 FRONT END)
NETSIZ:!
DEPHASE
SUBTTL CSM -- Canonical SPOOL Message
; !=======================================================!
; ! JOB NUMBER ! STATION # ! FLAGS !
; !-------------------------------------------------------!
; ! OWNER'S ID !
; !-------------------------------------------------------!
; \ \
; \ REQUESTED OBJECT BLOCK \
; \ \
; !-------------------------------------------------------!
; ! ENTERED (GTJFN'ED) FILENAME !
; !-------------------------------------------------------!
; ! SIZE OF THE FILE !
; !-------------------------------------------------------!
; ! FLAGS FOR .FPINF OF INCLUDED FILE !
; !-------------------------------------------------------!
; ! FORMS TYPE !
; !-------------------------------------------------------!
; ! OUTPUT LIMIT !
; !-------------------------------------------------------!
; ! AFTER PARAMETER FOR JOB !
; !-------------------------------------------------------!
; ! NOTE FIELD !
; ! (2 WORDS) !
; !-------------------------------------------------------!
; ! ! ADDRESS OF THE FD !
; !=======================================================!
;
; ! ----- TOPS 10 ----- !
; ! !
; !-------------------------------------------------------!
; ! USER'S NAME IN SIXBIT !
; ! (2 WORDS) !
; !=======================================================!
PHASE 0
CSM.JB:! BLOCK 1 ;JOB INFORMATION
CS.JOB==-1,,0 ;JOB NUMBER
CS.LOC==777000 ;NODE NUMBER (20-ONLY)
CS.LOC==777000 ;STATION NUMBER.
CS.FLG==000777 ;FLAGS
CS.DFR==1B27 ;DEFERRED MODE SPOOLING
CSM.OI:! BLOCK 1 ;OWNER'S ID
CSM.RO:! BLOCK ROBSIZ ;REQUESTED OBJECT
CSM.EN:! BLOCK 1 ;ENTER'ED (GTJFN'ED) FILENAME
CSM.FS:! BLOCK 1 ;SIZE OF THE FILE
CSM.FP:! BLOCK 1 ;FLAGS FOR .FPINF OF INCLUDED FILE
CSM.FM:! BLOCK 1 ;FORMS TYPE
CSM.LM:! BLOCK 1 ;OUTPUT LIMIT
CSM.AF:! BLOCK 1 ;AFTER PARAMETER FOR JOB
CSM.NT:! BLOCK 2 ;NOTE FIELD
CSM.FD:! BLOCK 1 ;FILE DESCRIPTOR INFORMATION
CS.FDA==0,,-1 ;ADDRESS OF THE FD TO INCLUDE
IFN FTUUOS,<
CSM.US:! BLOCK 2 ;USER NAME (2 WORDS)
> ;END IFN FTUUOS
CSMSIZ:! ;LENGTH OF THE CANONICAL SPOOL MESSAGE
DEPHASE
SUBTTL CLM -- Canonical LOGOUT Message
; !=======================================================!
; ! FUNCTION CODE !
; !-------------------------------------------------------!
; ! JOB NUMBER ! FLAG SETTINGS !
; !=======================================================!
PHASE 0
CLM.FC:! BLOCK 1 ;FUNCTION CODE - CONTAINS:
; .IPCSL IF FROM MONITOR
; .QIFNC IF INTERNAL
CLM.JB:! BLOCK 1 ;JOB INFORMATION
CL.JOB==-1,,0 ;JOB NUMBER
CL.BAT==1B18 ;JOB IS A BATCH JOB
CL.BQE==0,,-1 ;THIS FIELD CONTAINS THE ADDRESS
; OF THE BATCH JOB REQUEST (.QExxx)
; IF IT IS AN INTERNAL CALL
CLMSIZ:! ;LENGTH OF THE CANONICAL LOGOUT MESSAGE
DEPHASE
SUBTTL The Messages and their respective codes
;THE FOLLOWING PAGES CONTAIN THE FORMAT OF THE VARIOUS MESSAGES WHICH
; ARE SENT TO OR BY QUASAR TO VARIOUS SYSTEM COMPONENTS.
;EXTERNAL OPERATIONS
.QOHEL==1 ;HELLO - ESTABLISH CONTACT
.QOREL==2 ;RELEASE - FINISHED A REQUEST
.QOCHE==3 ;CHECKPOINT - FAILSOFT A REQUEST
.QOREQ==4 ;REQUEUE - RETURN A REQUEST
.QONEX==5 ;NEXTJOB - REQUEST GIVEN TO A COMPONENT
.QOABO==6 ;ABORT - STOP PROCESSING THAT REQUEST
.QOCRE==7 ;CREATE - MAKE A REQUEST
.QOLIS==10 ;LIST - GET A CROSS SECTION OF THE QUEUES
.QOMOD==11 ;MODIFY - CHANGE THE PARAMETERS OF A REQUEST
.QOKIL==12 ;KILL - REMOVE A REQUEST
.QOLAN==13 ;ANSWER MESSAGE TO LIST REQUEST
; 14 ;FUNCTION 14 OBSOLETE TEXT MSG (.QOOBS)
.QORCK==15 ;CHECKPOINT-REQUEST MESSAGE
.QODFR==16 ;DEFER MESSAGE
.QOROU==17 ;ROUTING CHANGE
.QOCOU==20 ;COUNT MESSAGE
.QOCAN==21 ;COUNT ANSWER MESSAGE
.QOSUP==22 ;SETUP MESSAGE
.QORSU==23 ;RESPONSE-TO-SETUP MESSAGE
; 24 ;FUNCTION 24 OBSOLETE OPR ACTION MSG (.QOOAC)
.QOHBO==25 ;HOLD/RELEASE MESSAGE
; 26 ;MONITOR SPOOL MESSAGE
; 27 ;MONITOR LOGOUT MESSAGE
.QOMNT==30 ;TAPE MOUNT REQUEST (USER TO QUASAR)
.QOSTU==31 ;DEVICE STATUS UPDATE MESSAGE
.QOMTR==32 ;TAPE MOUNT RELEASE MSG (SAME AS .QOREL)
.QOMTC==33 ;TAPE MOUNT CHKPNT MSG (SAME AS .QOCHE)
.QOMTA==34 ;TAPE MOUNT ABORT MSG (QUASAR TO MTCON)
.QOMAT==35 ;TAPE MOUNT ATTRIBUTES REQUEST
.QONWA==36 ;NODE-WENT-AWAY NOTIFICATION MESSAGE
.QOCQE==37 ;CREATE QUEUE ENTRY (SHORT CREATE MSG)
.QOREC==40 ;TAPE RECOGNIZE MESSAGE (QUASAR TO TAPE LABELER)
.QOTST==41 ;TAPE STATUS MESSAGE (TAPE LABELLER TO QUASAR)
.QOUNL==42 ;TAPE UNLOAD MESSAGE (QUASAR TO TAPE LABELLER)
.QOVMN==43 ;TAPE VOLUME IN USE (REASSIGNED)
; (QUASAR TO TAPE LABELLER)
.QOVDM==44 ;TAPE VOLUME DEASSIGNED (QUASAR TO TAPE LAB)
.QOVSR==45 ;VOLUME SWITCH REQUEST (TAPE LAB TO QUASAR)
.QOVSD==46 ;VOLUME SWITCH DIRECTIVE (QUASAR TO TAPE LAB)
.QOREW==47 ;TAPE REWIND MESSAGE (QUASAR 2 TAPE LABELER)
;INTERNAL OPERATIONS
.QIFNC==1B18 ;IF BIT 18 IS SET, THE CALL IS INTERNAL
; AND THE REQUEST MAY BE INTERPRETED
; DIFFERENTLY THAN EXTERNAL CALLS
.QIRET==1B19 ;If bit 18 is set, this is a
;monitor archive request, so
;dont bomb it if queue entry
;is disabled.
SUBTTL The HELLO Message -- Function 1
; !=======================================================!
; \ \
; \ The Message Header \
; \ \
; !=======================================================!
; ! Program Name !
; !-------------------------------------------------------!
; ! QUASAR Internal Version ! Flags !
; !-------------------------------------------------------!
; ! Number of OBJect Types ! Max no. concurrent jobs !
; !-------------------------------------------------------!
; ! !
; \ List of object types \
; \ \
; \ From 1 to 5 object types allowed \
; ! !
; !=======================================================!
PHASE MSHSIZ ;APPEND TO THE MESSAGE HEADER
HEL.NM:! BLOCK 1 ;PROGRAM NAME
HEL.FL:! BLOCK 1 ;INTERNAL VERSION AND FLAGS
HEFVER==-1,,0 ;INTERNAL VERSION NUMBER (%%.QSR)
HEFFLG==0,,-1 ;MASK FOR FLAGS
HEFBYE==1B18 ;PROCESSOR SAYING "GOOD BYE"
HEL.NO:! BLOCK 1 ;NUMBER OF OBJ TYPES AND MAX NO JOBS
HENNOT==-1,,0 ;NUMBER OF OBJECT TYPES
HENMAX==0,,-1 ;MAXIMUM NUMBER OF JOBS
HEL.OB:! BLOCK OBPRSZ ;LIST OF OBJECTS (UP TO OBPRSZ)
HEL.SZ:! ;SIZE OF THE HELLO MESSAGE
DEPHASE
SUBTTL The RELEASE Message -- Function 2
; !=======================================================!
; / /
; / THE MESSAGE HEADER /
; / /
; !=======================================================!
; ! INTERNAL TASK NAME !
; !=======================================================!
; EXTRA INFORMATION IS RETURNED BY BATCON DURING ITS RELEASE MESSAGE
; !=======================================================!
; ! FLAG SETTINGS ! THE JOB NUMBER !
; !-------------------------------------------------------!
; / /
; / STANDARD FD AREA DESCRIBING THE LOG FILE /
; / THE LENGTH IS DERIVED FROM THE RELEASE MESSAGE SIZE /
; / /
; !=======================================================!
PHASE MSHSIZ
REL.IT:! BLOCK 1 ;INTERNAL TASK NAME
REL.SZ:! ;SIZE OF THE RELEASE MESSAGE
REL.BJ:! BLOCK 1 ;BATCH JOB INFORMATION
RL.DLG==1B0 ;DELETE THE LOG FILE AFTER PRINTING
RL.SPL==1B1 ;LOG FILE IS SPOOLED
RL.JOB==0,,-1 ;THE JOB NUMBER
REL.FD:! BLOCK FDXSIZ ;RESERVE SPACE FOR THE MAXIMUM FD RETURNED
REL.BL:! ;MAXIMUM LENGTH OF A BATCON RELEASE
DEPHASE
SUBTTL The CHECKPOINT and REQUEUE messages -- Functions 3 and 4
; !=======================================================!
; / /
; / THE MESSAGE HEADER /
; / /
; !=======================================================!
; ! INTERNAL TASK NAME !
; !-------------------------------------------------------!
; ! !
; / CHECKPOINT/REQUEUE INFORMATION /
; / /
; / (5 WORDS) /
; ! !
; !-------------------------------------------------------!
; ! AFTER TIMER (REQ) !
; !=======================================================!
PHASE MSHSIZ
REQ.IT:! BLOCK 1 ;INTERNAL TASK NAME
REQ.FL:! BLOCK 1 ;REQUEUE FLAGS
RQ.HBO==1B0 ;HOLD BY OPR
RQ.RLC==1B1 ;RESTART AT LAST CHECKPOINT
;I.E. DONT UPDATE CHECKPOINT INFO
REQ.IN:! BLOCK EQCKSZ ;CHECKPOINTING INFORMATION
REQ.SZ:!
DEPHASE
PHASE MSHSIZ
CHE.IT:! BLOCK 1 ;INTERNAL TASK NAME
CHE.FL:! BLOCK 1 ;FLAG WORD
CH.FCH==1B0 ;DO A CHECKPOINT
CH.FST==1B1 ;UPDATE STATUS
CH.JBN==0,,-1 ;BATCH JOB NUMBER
CHE.MS:! ;MINIMUM SIZE OF CHECKPOINT MESSAGE
CHE.IN:! BLOCK EQCKSZ ;CHECKPOINT INFORMATION
CHE.ST:! BLOCK STSSIZ ;SPOOLER STATUS
CHE.SZ:!
DEPHASE
;Definition of the request limit words for each object type
DEFINE DEFLIM(NAME,WORD,SIZE,POS),<
RADIX 5+5
IF1,<IFDEF L.'NAME,<PRINTX Mult. defined limit parameter NAME>>
IFL <36-SIZE>,<PRINTX Illegal size for limit NAME>
IFL <35-POS>,<PRINTX Illegal position for limit NAME>
IFLE <EQLMSZ-WORD>,<PRINTX Illegal word for limit NAME>
L.'NAME==<BYTE (18) WORD (9) SIZE,POS>
RADIX 4+4
> ;END DEFINE DEFLIM
;Batch job parameters
DEFLIM UNIQ,0,2,1 ;/UNIQUE
DEFLIM REST,0,2,3 ;/RESTART
DEFLIM OINT,0,2,5 ;/OPRINT (OPR INTERVENTION)
DEFLIM OUTP,0,3,8 ;/OUTPUT
DEFLIM DEPN,0,18,35 ;/DEPENDENCY
DEFLIM CORE,1,18,17 ;/CORE
DEFLIM TIME,1,18,35 ;/TIME
DEFLIM SLPT,2,18,17 ;SPOOLED LPT LIMIT
DEFLIM SCDP,2,18,35 ;SPOOLED CDP LIMIT
DEFLIM SPTP,3,18,17 ;SPOOLED PTP LIMIT
DEFLIM SPLT,3,18,35 ;SPOOLED PLT LIMIT
DEFLIM ONOD,4,36,35 ;BATCH OUTPUT DESTINATION NODE
DEFLIM BLOG,5,2,1 ;/BATLOG
;Output job parameters
DEFLIM FORM,0,36,35 ;FORMS
DEFLIM NBLK,1,18,17 ;NUMBER OF BLOCKS
DEFLIM OLIM,1,18,35 ;OUTPUT LIMIT
DEFLIM NOT1,2,36,35 ;FIRST HALF OF NOTE
DEFLIM NOT2,3,36,35 ;SECOND HALF OF NOTE
DEFLIM FLEA,4,2,1 ;FORMS-LIMIT-EXCEEDED ACTION (SET BY OPR)
;Batch input parameters
DEFLIM CJOB,1,18,17 ;NUMBER OF JOBS
DEFLIM CTIM,2,36,35 ;START TIME
DEFLIM CNOD,3,36,35 ;NODE AT WHICH READER IS LOCATED
TOPS20 <
;Archive tape parameters
DEFLIM TDTD,0,36,35 ;DUMPER timestamp
DEFLIM TUFT,0,1,0 ;Use 1st tape rather than 2nd if on
DEFLIM TDAT,0,35,35 ;Actual time stamp
DEFLIM TID1,1,36,35 ;Tape 1 ID
DEFLIM TTN1,2,36,35 ;Saveset and tape file #
DEFLIM TTS1,2,18,17 ; Saveset 1
DEFLIM TTF1,2,18,35 ;Tape file # 1
DEFLIM TID2,3,36,35 ;Tape 2 ID
DEFLIM TTN2,4,36,35 ;Saveset and tape file # 2
DEFLIM TTS2,4,18,17 ;Saveset 2
DEFLIM TTF2,4,18,35 ;Tape file # 2
> ;END TOPS20 CONDITIONAL
DEFINE GETLIM(AC,BLOCK,NAME),<
IFNDEF L.'NAME,<PRINTX Undefined limit parameter NAME>
..Z==BLOCK
..O==<L.'NAME&777777000000>_-^D18
..Z==..Z+..O
..S==<L.'NAME&777000>_-^D9
..P==<L.'NAME&777>
..P==^D35-..P
..Z==..Z+<..S>B11+<..P>B5
LDB AC,[EXP ..Z]
> ;END DEFINE GETLIM
DEFINE STOLIM(AC,BLOCK,NAME),<
IFNDEF L.'NAME,<PRINTX Undefined limit parameter NAME>
..Z==BLOCK
..O==<L.'NAME&777777000000>_-^D18
..Z==..Z+..O
..S==<L.'NAME&777000>_-^D9
..P==<L.'NAME&777>
..P==^D35-..P
..Z==..Z+<..S>B11+<..P>B5
DPB AC,[EXP ..Z]
> ;END DEFINE STOLIM
SUBTTL The NEXTJOB and CREATE Messages -- Functions 5 and 7
; The NEXTJOB Message, Function 5, is the message which instructs a
; known component to process a job. The CREATE Message, Function 7, is
; sent to QUASAR by an unknown component as a request to create a job in
; one of the external queues. Both of these messages are in the form of
; the External Queue Entry (EQ).
;
; The External Queue Entry (EQ) consists of a header section followed by
; a list of file-specifications.
;
; The header section has three (3) parts:
;
; 1. The operating system independent header which is required and
; is the same on both operating systems.
;
; 2. The operating system dependent header which immediately
; follows the operating system independent header. It is
; required and is different for each operating system.
;
; The above parts comprise the minimum header size EQHSIZ.
;
;
; 3. The operating system dependent optional parameters which when
; present immediately follow the operating system dependent
; part of the header.
;
;
; The length of the entire header for a given request is stored in the
; header in .EQLEN<EQ.LOH>.
;
; Following the header sections is a list of one or more
; file-specifications. Each file-spec consists of a File-Parameter area
; (FP) followed by the standard File Descriptor area (FD).
SUBTTL EQ -- The External Queue Entry
; !=======================================================!
; \ \
; \ THE MESSAGE HEADER \
; \ \
; !=======================================================!
; ! INTERNAL TASK NAME (ITN) !
; !-------------------------------------------------------!
; ! INTERNAL REQUEST VERSION ! LENGTH OF HEADER !
; !-------------------------------------------------------!
; \ \
; \ REQUESTED OBJECT BLOCK \
; \ \
; !-------------------------------------------------------!
; \ \
; \ JOB INFORMATION BLOCK \
; \ \
; !-------------------------------------------------------!
; ! REQUEST PROTECTION CODE !NUMBER OF FILES IN REQUEST !
; !-------------------------------------------------------!
; ! SPARE EQ FIELD !
; !-------------------------------------------------------!
; ! AFTER PARAMETER (INTERNAL DATE/TIME FORMAT) !
; !-------------------------------------------------------!
; ! DEADLINE TIME (INTERNAL DATE/TIME FORMAT) !
; !-------------------------------------------------------!
; ! !
; \ REQUEST LIMIT INFORMATION \
; \ CONTENTS ARE QUEUE DEPENDENT \
; \ 5 WORDS \
; ! !
; !-------------------------------------------------------!
; ! !
; \ REQUEST CHECKPOINT INFORMATION \
; \ MAINTAINED BY KNOWN COMPONENTS \
; \ EQCKSZ WORDS \
; ! !
; !-------------------------------------------------------!
; ! !
; \ ACCOUNT STRING \
; \ \
; \ 8 WORDS \
; ! !
; !-------------------------------------------------------!
; ! !
; ! THE LAST FEW WORDS OF THE "EQ" HEADER !
; ! ARE OPERATING SYSTEM DEPENDENT AS FOLLOWS !
;
;
; ! ----- TOPS 10 ----- !
; ! !
; !-------------------------------------------------------!
; ! USER NAME IN SIXBIT !
; ! (2 WORDS) !
; !=======================================================!
; ! !
; \ PATH SPECIFICATION \
; \ (OPTIONAL) \
; \ SIX WORDS \
; ! !
; !=======================================================!
;
; ! ----- TOPS 20 ----- !
; ! !
; !-------------------------------------------------------!
; ! !
; \ REQUEST OWNER SPECIFICATION \
; \ \
; \ (10 WORDS) \
; ! !
; !-------------------------------------------------------!
; ! !
; \ CONNECTED DIRECTORY OF REQUEST CREATOR \
; \ \
; \ (12 WORDS) \
; ! !
; !=======================================================!
; ! SPOOLED INPUT SET HANDLE !
; !=======================================================!
PHASE MSHSIZ
.EQITN:! BLOCK 1 ;INTERNAL TASK NAME
.EQLEN:! BLOCK 1 ;LENGTH WORD
EQ.VRS==-1,,0 ;VERSION NUMBER OF REQUEST (%%.QSR)
EQ.LOH==0,,-1 ;LENGTH OF THE HEADER ( e.g. EQHSIZ)
.EQROB:! BLOCK ROBSIZ ;REQUESTED OBJECT BLOCK
.EQJBB:! BLOCK JIBSIZ ;JOB INFORMATION BLOCK
.EQSPC:! BLOCK 1 ;FILE SPECIFICATION WORD
EQ.PRO==-1,,0 ;REQUEST PROTECTION
EQ.NUM==0,,-1 ;NUMBER OF FILES IN THE REQUEST
.EQSPR:! BLOCK 1 ;SPARE EQ FIELD
.EQAFT:! BLOCK 1 ;AFTER PARAMETER (INTERNAL FORMAT)
.EQDED:! BLOCK 1 ;DEADLINE TIME (INTERNAL FORMAT)
.EQLIM:! BLOCK EQLMSZ ;NOTE THAT EQLMSZ IS DEFINED IN
;THE OVERALL STRUCTURE DEFINITION
.EQCHK:! BLOCK EQCKSZ ;CHECKPOINT/REQUEUE INFORMATION
.EQACT:! BLOCK 10 ;ACCOUNT STRING
EQISIZ:!
;END OF OPERATING SYSTEM INDEPENDENT HEADER - MORE OF CREATE MESSAGE FOLLOWS
;THIS IS THE JOB INFORMATION BLOCK STRUCTURE DESCRIPTION
.EQJOB==.EQJBB+JIB.JN ;JOB NAME (SIXBIT)
.EQSEQ==.EQJBB+JIB.SQ ;EXTERNAL VALUES
EQ.SEQ==-1,,0 ;EXTERNAL SEQUENCE NUMBER
EQ.ACT==1B21 ;REQUEST REQUIRES ACCOUNT VALIDATION
EQ.IAS==1B22 ;REQUEST CONTAINS AN INVALID ACCT STRING
EQ.NOT==3B24 ;JOB REQUESTED /NOTIFY
EQ.JBC==1B25 ;JOB HAS BEEN CHECKPOINTED
EQ.HBO==1B26 ;JOB HELD BY OPERATOR
EQ.PRV==1B27 ;REQUEST CREATOR WAS PRIVILEGED
EQ.SPL==1B28 ;REQUEST CONTAINS SPOOLED FILES
EQ.RDE==1B29 ;THIS REQUEST DOESN'T EXIST (CLEAN-UP)
EQ.PRI==77B35 ;EXTERNAL PRIORITY
.EQOID==.EQJBB+JIB.US ;-10(PPN), -20(USER NUMBER)
.EQRID==.EQJBB+JIB.ID ;REQUEST ID
TOPS10 <
.EQOWN==.EQJBB+JIB.NM ;TOPS-10 USER NAME IN SIXBIT (2 WORDS)
>
;BEGINNING OF OPERATING SYSTEM DEPENDENT HEADER
TOPS20 <
.EQOWN:! BLOCK EQNMSZ ;EXTERNAL OWNER SPECIFICATION
.EQCON:! BLOCK 12 ;CONNECTED DIRECTORY
> ;END TOPS20 CONDITIONAL
;END OF OPERATING SYSTEM DEPENDENT HEADER
;BEGINNING OF OPERATING SYSTEM DEPENDENT OPTIONAL PARAMETERS
TOPS10 < ;MAKE ROOM FOR THE INPUT QUEUE PATH SPEC
.EQPAT:! BLOCK 6 ;PATH
.EQPSZ:! ;SIZE OF HEADER WITH PATH
> ;END TOPS10 CONDITIONAL
TOPS20 <
.EQSIS:! BLOCK 1 ;HANDLE FOR SPOOLED INPUT SET
> ;END TOPS20 CONDITIONAL
EQHSIZ:! ;TO DEFINE THE EQ HEADER SIZE
EQXSIZ:! ;MAXIMUM "DEFINED" SIZE OF AN EQ
;THIS MAXIMUM SHOULD NOT BE ENFORCED SINCE
; VARIOUS USER APPLICATIONS MAY PASS MORE
DEPHASE
; !=======================================================!
; ! LENGTH OF FILE-PARAM AREA ! !
; !-------------------------------------------------------!
; !FILE FMT !PAPR FMT!SPACING ! FLAGS ! COPIES !
; !-------------------------------------------------------!
; ! STARTING INFORMATION (CUSP DEPENDENT) !
; !-------------------------------------------------------!
; ! /REPORT WORD 1 !
; !-------------------------------------------------------!
; ! /REPORT WORD 2 !
; !-------------------------------------------------------!
; !RCRD FMT! ! RECORD LGTH !
; !-------------------------------------------------------!
; ! RECORD COUNT !
; !=======================================================!
PHASE 0
.FPLEN:! BLOCK 1 ;SIZE WORD
FP.LEN==-1,,0 ;SIZE OF THE FP
PHASE 1 ;OUTPUT QUEUES
.FPINF:! BLOCK 1 ;FILE PARAMETER INFORMATION
FP.FFF==77B5 ;FILE FORMAT
.FPFAS==1 ;ASCII
.FPFFO==2 ;FORTRAN
.FPFCO==3 ;COBOL
.FPFAI==4 ;AUGMENTED IMAGE (FOR BIN QUEUE)
.FPFSA==5 ;STREAM ASCII (FOR BIN QUEUE)
.FPF11==6 ;ELEVEN
.FPFIM==7 ;IMAGE (FOR XFR QUEUE)
.FPF8B==10 ;8 BIT ASCII FILE
.FPMAX==.FPF8B ;MAX FP VALUE DEFINED
FP.FPF==77B11 ;PAPER FORMAT (SEE THE NEXT PAGE)
FP.FSP==77B17 ;SPACING CODE
FP.DEL==1B18 ;ON = DELETE THIS FILE
FP.FLG==1B19 ;THIS IS THE LOG FILE
FP.NFH==1B20 ;NO FILE HEADERS
FP.SPL==1B21 ;THIS IS A SPOOLED FILE
FP.PCR==1B22 ;SPOOLED CARD READER FILE
FP.XXX==17B26 ;EXTRA FLAG BITS
FP.FCY==777B35 ;COPY COUNT
.FPFST:! BLOCK 1 ;STARTING POINT INFORMATION
.FPFR1:! BLOCK 1 ;/REPORT WORD 1
.FPFR2:! BLOCK 1 ;/REPORT WORD 2
FPMSIZ:! ;MINUMUM FP AREA SIZE
FPXSIZ:! ;MAXIMUM FP AREA SIZE
PHASE 1 ;BIN QUEUE
.FPINF:! BLOCK 1 ;FP INFORMATION (SEE NEXT PAGE)
FP.RCF==77B5 ;RECORD FORMAT
FP.RCL==777B35 ;RECORD LENGTH (FOR FIXED FORMAT)
.FPRCD:! BLOCK 1 ;RECORD COUNT
DEPHASE
;PAPER FORMATS FOR LPT QUEUE (/PRINT)
%FPLAR==1 ;ARROW FORMAT
%FPLAS==2 ;ASCII FORMAT
%FPLOC==3 ;OCTAL FORMAT
%FPLSU==4 ;SUPPRESS FORMAT
;PAPER FORMATS FOR PTP QUEUE (/TAPE)
%FPTAS==1 ;ASCII FORMAT
%FPTIM==2 ;IMAGE FORMAT
%FPTIB==3 ;IMAGE BINARY FORMAT
%FPTBI==4 ;BINARY FORMAT
;PAPER FORMATS FOR CDP QUEUE (/PUNCH)
%FPCAS==1 ;ASCII FORMAT
%FPCBC==2 ;026 (BCD) FORMAT
%FPCBI==3 ;BINARY FORMAT
%FPCIM==5 ;IMAGE FORMAT
;PAPER FORMAT FOR PLT QUEUE (/PLOT)
%FPPIM==1 ;IMAGE FORMAT
%FPPAS==2 ;ASCII FORMAT
%FPPBI==3 ;BINARY FORMAT
;VALUES FOR .EQLM1<EQ.OUT> (/OUTPUT FIELD)
%EQONL==1 ;NO LOG
%EQOLG==2 ;LOG FILE ALWAYS
%EQOLE==3 ;LOG FILE ON ERROR ONLY
;VALUES FOR .EQLM1<EQ.UNI> (/UNIQUE FIELD)
%EQUNO==1 ;/UNIQUE:NO
%EQUYE==2 ;/UNIQUE:YES
;VALUES FOR .EQLM1<EQ.RST> (/RESTART FIELD)
%EQRNO==1 ;/RESTART:NO
%EQRYE==2 ;/RESTART:YES
;VALUES FOR .EQLIM WORD 6 (BATCH ONLY) (/BATLOG: FIELD)
%BAPND==1 ;APPEND OUTPUT LOG
%BSCDE==2 ;SUPERSEDE OUTPUT LOG
%BSPOL==3 ;SPOOL OUTPUT LOG
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
;DEFINITIONS FOR XFR QUE FP
FP.RFM==FP.FPF ;RECORD FORMAT INSTEAD OF PAPER FORMAT
FP.MRS==FP.FCY ;MAXIMUM RECORD SIZE INSTEAD OF COPIES
;VALUES FOR RECORD FORMAT (FP.RFM)
%FPXFI==1 ;FIXED LENGTH RECORDS
%FPXVA==2 ;VARIABLE LENGTH RECORDS
;VALUE FOR FILE RETREIVAL .EQLM1<EQ.UFT>
%EQUFT==1B0 ;USE FIRST TAPE NOT SECOND IF LIT
SUBTTL The ABORT Message -- Function 6
; !=======================================================!
; / /
; / THE MESSAGE HEADER /
; / /
; !=======================================================!
; ! INTERNAL TASK NAME !
; !-------------------------------------------------------!
; ! OBJECT TYPE !
; !-------------------------------------------------------!
; ! UNIT NUMBER !
; !-------------------------------------------------------!
; ! NODE !
; !-------------------------------------------------------!
; ! REASON CODE !
; !-------------------------------------------------------!
; ! ID OF PERSON REQUESTING THE CANCEL !
; !=======================================================!
PHASE MSHSIZ
ABO.IT:! BLOCK 1 ;INTERNAL TASK NAME
ABO.TY:! BLOCK 1 ;OBJECT TYPE
ABO.UN:! BLOCK 1 ;UNIT NUMBER
ABO.NO:! BLOCK 1 ;NODE
ABO.CD:! BLOCK 1 ;CODE INDICATING CAUSE OF MESSAGE
ABOUSR==1 ; BY USER REQUEST
ABO.ID:! BLOCK 1 ;ID OF PERSON REQUESTING THE KILL
ABO.SZ:! ;SIZE OF THE ABORT MESSAGE
DEPHASE
SUBTTL The LIST Message -- Function 10
; !=======================================================!
; / /
; / THE MESSAGE HEADER /
; / /
; !=======================================================!
; ! FLAG WORD !
; !-------------------------------------------------------!
; ! ARGUMENT COUNT !
; !=======================================================!
; ARGUMENT DATA BLOCK
; !-------------------------------------------------------!
; ! LENGTH OF ARGUMENT BLOCK ! TYPE OF ARGUMENT !
; !-------------------------------------------------------!
; \ \
; \ DATA FOR THE ARGUMENT \
; \ \
; !=======================================================!
;THE FLAG WORD (.OFLAG) CAN HAVE THE FOLLOWING BITS LIT:
LS.FST==1B1 ;YOU WANT A QUICK QUEUES LISTING.
LS.ALL==1B2 ;YOU WANT TO SEE EVERYTHING !!!
;THE LIST QUEUES MESSAGE CONTAINS 2 BLOCKS.
.LSQUE==0 ;THE QUEUES YOU WANT TO LIST.
.LSUSR==1 ;THE USER ID FOR THE QUEUE ENTRYS YOU WANT.
; .ORNOD ;THE NODE WHOSE QUEUE ENTRIES YOU WANT
;THE .LSQUE BLOCK AND ITS POSSIBLE VALUES IS DEFINED BELOW.
LIQBAT==1B0 ;LIST THE BATCH QUEUE
LIQLPT==1B1 ;LIST THE PRINTER QUEUE
LIQCDP==1B2 ;LIST THE CARD-PUNCH QUEUE
LIQPTP==1B3 ;LIST THE PAPER-TAPE PUNCH QUEUE
LIQPLT==1B4 ;LIST THE PLOTTER QUEUE
LIQMNT==1B6 ;LIST THE TAPE MOUNT QUEUE
LIQRET==1B7 ;LIST THE RETRIEVAL QUEUE
LIQOUT==LIQLPT+LIQCDP+LIQPTP+LIQPLT ;LIST ALL OUTPUT QUEUES.
LIQALL==LIQOUT+LIQBAT+LIQRET+LIQMNT ;LIST ALL THE QUEUES.
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
; !=======================================================!
; ! 2 ! .LSQUE !
; !-------------------------------------------------------!
; ! THE QUEUE(S) YOU WANT TO LIST !
; !=======================================================!
;THE .LSUSR BLOCK IS DEFINED BELOW.
; !=======================================================!
; ! 2 ! .LSUSR !
; !-------------------------------------------------------!
; ! THE USER ID (PPN ON THE -10) OF THE !
; ! QUEUE ENTRYS YOU WANT !
; !=======================================================!
;THE .ORNOD BLOCK IS DEFINED BELOW
; !=======================================================!
; ! 2 ! .ORNOD !
; !-------------------------------------------------------!
; ! SIXBIT NODE NAME or OCTAL NODE # !
; !=======================================================!
SUBTTL The MODIFY Message -- Function 11
; !=======================================================!
; / /
; / THE MESSAGE HEADER /
; / /
; !=======================================================!
; ! QUEUE NAME !
; !-------------------------------------------------------!
; ! !
; \ REQUEST DESCRIPTOR BLOCK (RDB) \
; \ \
; \ TO DESCRIBE MODIFY REQUEST \
; ! !
; !-------------------------------------------------------!
; THE FOLLOWING BLOCK IS DUPLICATED FOR EACH "GROUP" TO BE MODIFIED
; THE LENGTH OF THE BLOCK IS DEPENDENT ON THE GROUP.
; IF AN ELEMENT IS NOT TO BE CHANGED, SPECIFY -1 AS THE VALUE.
; ELEMENTS ARE POSITIONAL WITHIN A GROUP AND NO ENDING INDICATION IS NECESSARY
; AS THE VARIOUS LENGTH FIELDS DETERMINE THE NEXT OR END OF THE MESSAGE
; FOR DESCRIPTIONS OF THE GROUP ELEMENTS AND POSITIONS THE READER IS DIRECTED TO:
; QSRQUE - MAJMOD FOR MAJOR REQUEST GROUP 0
; QSRSCH - MODIFIERS FOR QUEUE DEPENDENT GROUP 1
; !=======================================================!
; ! GROUP NUMBER ! WORD COUNT !
; !=======================================================!
PHASE MSHSIZ
MOD.OT:! BLOCK 1 ;OBJECT TYPE
MOD.RQ:! BLOCK RDBSIZ ;REQUEST DESCRIPTOR BLOCK
MOD.SZ:! ;MINIMUM SIZE OF A MODIFY REQUEST
MOD.FG:! ;FIRST GROUP WORD IN MODIFY REQUEST
PHASE 0 ;RELATIVE OFFSET
MOD.GN:! BLOCK 1 ;GROUP WORD
MODGPN==-1,,0 ;THE GROUP NUMBER
.GPMAJ==0 ;MAJOR PARAMETERS (AFTER, PRIORITY, etc...)
.GPQUE==1 ;QUEUE DEPENDENT (FORMS, TIME LIMIT, etc...)
MODGLN==0,,-1 ;THE NUMBER OF ELEMENTS (INCLUDING THIS WORD)
MOD.GE:! ;THE FIRST GROUP ELEMENT TO BE MODIFIED
DEPHASE
;IF MODIFYING /DEPENDENCY COUNT FOR INPUT QUEUES, 3 FORMS ARE RECOGNIZED
.MODAB==0 ;NEW VALUE IS ABSOLUTE CHANGE
.MODPL==1 ;NEW VALUE IS ADDITIVE
.MODMI==2 ;NEW VALUE IS SUBTRACTIVE
SUBTTL The KILL Message -- Function 12
; !=======================================================!
; / /
; / THE MESSAGE HEADER /
; / /
; !=======================================================!
; ! QUEUE NAME !
; !-------------------------------------------------------!
; ! !
; \ REQUEST DESCRIPTOR BLOCK (RDB) \
; \ \
; \ TO DESCRIBE KILL REQUEST \
; ! !
; !-------------------------------------------------------!
PHASE MSHSIZ
KIL.OT:! BLOCK 1 ;OBJECT TYPE
KIL.RQ:! BLOCK RDBSIZ ;REQUEST DESCRIPTOR BLOCK
KIL.SZ:! ;SIZE OF KILL ENTRY
DEPHASE
SUBTTL THE LIST ANSWER MESSAGE.
;THE LIST ANSWER MESSAGE IS CONSTRUCTED AS FOLLOWS:
; !=======================================================!
; \ \
; \ THE MESSAGE HEADER \
; \ \
; !=======================================================!
; ! FLAG WORD !
; !-------------------------------------------------------!
; ! ARGUMENT COUNT !
; !=======================================================!
; ! HEADER LENGTH ! HEADER BLOCK TYPE (.WTTYP) !
; !-------------------------------------------------------!
; \ \
; \ THE MESSAGE HEADER \
; \ \
; !-------------------------------------------------------!
; ! ANSWER LENGTH ! ANSWER BLOCK TYPE (.WTTXT) !
; !-------------------------------------------------------!
; \ \
; \ THE QUEUES LISTING IN ASCIZ \
; \ \
; !=======================================================!
;THE FLAG WORD CAN CONTAIN THE FOLLOWING BITS:
WT.MOR==WT.MOR ;MORE DISPLAY PAGES COMMING.
;THIS IS ORIGIONALLY DEFINED IN ORNMAC.
SUBTTL The REQUEST FOR CHECKPOINT Message -- Function 15
; !=======================================================!
; / /
; / THE MESSAGE HEADER /
; / /
; !=======================================================!
; ! INTERNAL TASK NUMBER !
; !-------------------------------------------------------!
; ! OBJECT TYPE !
; !-------------------------------------------------------!
; ! UNIT NUMBER !
; !-------------------------------------------------------!
; ! NODE !
; !=======================================================!
PHASE MSHSIZ
RCK.IT:! BLOCK 1 ;THE ITN
RCK.TY:! BLOCK 1 ;THE OBJECT TYPE
RCK.UN:! BLOCK 1 ;THE UNIT NUMBER
RCK.NO:! BLOCK 1 ;THE NODE
RCK.SZ:! ;THE SIZE OF THE REQUEST FOR CHECKPOINT MESSAGE
DEPHASE
SUBTTL The DEFER Message -- Function 16
; !=======================================================!
; / /
; / THE MESSAGE HEADER /
; / /
; !=======================================================!
; ! QUEUE NAME FOR THE REQUEST (0 IF ALL) !
; !-------------------------------------------------------!
; ! FLAGS ! FUNCTION ! JOB NUMBER !
; !=======================================================!
PHASE MSHSIZ
DFR.OT:! BLOCK 1 ;THE OBJECT TYPE ( 0 IF ALL)
DFR.JB:! BLOCK 1 ;JOB INFORMATION
DF.FNC==777B17 ;THE FUNCTION REQUESTED
.DFREL==0 ;RELEASE ALL DEFERRED FILES
.DFKIL==1 ;KILL ALL DEFERRED FILES
DF.JOB==0,,-1 ;THE JOB NUMBER
DFR.SZ:! ;SIZE OF THE DEFER MESSAGE
DEPHASE
SUBTTL Event Counters
;QUASAR MAINTAINS A SET OF EVENT COUNTERS FOR VARIOUS EVENTS THAT
; MIGHT BE OF INTEREST. THESE COUNTERS ARE PRIMARILY FOR THE
; USE OF SOFTWARE DEVELOPMENT PEOPLE TO HELP KEEP A HANDLE ON
; WHAT IS REALLY HAPPENING INSIDE OF QUASAR.
;
;TWO MESSAGES EXIST TO HANDLE THESE COUNTERS:
; COUNT FUNCTION 20 SENT TO REQUEST CURRENT COUNTS
; CNTANSWER FUNCTION 21 SENT AS RESPONSE TO COUNT MESSAGE
;FOLLOWING ARE THE MACROS USED TO MANIPULATE THE COUNTERS:
DEFINE X(A,B),<
XLIST
INTERN $$'A
$$'A==$$
$$==$$+1
LIST
SALL
> ;END DEFINE X
DEFINE $COUNT(A),<
IFNDEF $$'A,<
PRINTX UNDEFINED COUNTER A USED
>
AOS G$ITEM##+$$'A
> ;END DEFINE $COUNT
DEFINE $SITEM(AC,A),<
IFNDEF $$'A,<
PRINTX UNDEFINED COUNTER A USED
>
STORE AC,G$ITEM##+$$'A
> ;END DEFINE $SITEM
;THE COUNTERS ARE DEFINE ON THE NEXT PAGE
;THE COUNTERS
DEFINE $ITEM,<
XLIST
X (NOW,CURRENT TIME OF DAY)
X (STAR,QUASAR START TIME)
X (QJOB,QUASARS JOB NUMBER)
X (IPCI,TOTAL NUMBER OF IPCF INTERRUPTS RECEIVED)
X (RIPC,IPCF MESSAGES RECEIVED)
X (SIPC,IPCF MESSAGES SENT)
X (IPCF,IPCF SEND FAILURES)
X (IPCU,UNRECOVERABLE IPCF SEND FAILURES)
X (MREL,RELEASE MESSAGES RECEIVED)
X (MCHK,CHECKPOINT MESSAGES RECEIVED)
X (MREQ,REQUEUE MESSAGES RECEIVED)
X (MNXT,NEXTJOB MESSAGES SENT)
X (MABO,ABORT MESSAGES SENT)
X (MLST,LIST MESSAGES RECEIVED)
X (NLAP,LISTANSWER PAGES SENT)
X (SCRE,SUCCESSFUL CREATES DONE)
X (MMOD,MODIFY MESSAGES RECEIVED)
X (MKIL,KILL MESSAGES RECEIVED)
X (MDEF,DEFER MESSAGES RECEIVED)
X (ISPL,IMMEDIATE SPOOL MESSAGES RECEIVED)
X (DSPL,DEFFERED SPOOL MESSAGES RECEIVED)
X (MCAN,COUNTANSWER MESSAGES SENT)
X (SLCD,SCHEDULER LOOP COUNTDOWNS)
LIST
SALL
> ;END DEFINE $ITEM
$$=0 ;START CLEAN
$ITEM ;NOW CALL IT
NITEMS=$$ ;TOTAL NUMBER OF ITEMS
SUBTTL The COUNT Message -- Function 20
PHASE MSHSIZ
COU.SZ:! ;SIZE OF COUNT MESSAGE
DEPHASE
SUBTTL The COUNTANSWER Message -- Function 21
PHASE MSHSIZ
CAN.BL:! BLOCK NITEMS ;BLOCK OF ITEMS
CAN.SZ:! ;SIZE OF COUNTANSWER MESSAGE
DEPHASE
SUBTTL The SETUP/SHUTDOWN Message -- Function 22
;The SETUP message is sent to cause a component to service an object for
; which we have a job.. The SHUTDOWN message is sent to cause a
; component to give up control of a object.
; !=======================================================!
; \ \
; \ The Message Header \
; \ \
; !=======================================================!
; ! Flags !
; !-------------------------------------------------------!
; ! Type of OBJect to set up !
; !-------------------------------------------------------!
; ! Unit number of OBJect to set up !
; !-------------------------------------------------------!
; ! Node to set up OBJect at !
; !-------------------------------------------------------!
; ! Port Number ! Line Number !
; !-------------------------------------------------------!
; ! Network Status Bits !
; !-------------------------------------------------------!
; ! Port/Line Handle !
; !=======================================================!
PHASE MSHSIZ ;START WITH STD. MESSAGE HEADER
SUP.FL:! BLOCK 1 ;FLAGS
SUFSHT==1B0 ;SHUTDOWN INSTEAD OF SETUP
SPLTAP==1B1 ;BIT FOR PRINTER SPOOLER (SPOOL TO TAPE)
SUP.TY:! BLOCK 1 ;TYPE OF OBJECT TO SET UP FOR
SUP.UN:! BLOCK 1 ;UNIT NUMBER, OF THIS TYPE, TO SET UP
SUP.NO:! BLOCK 1 ;SIXBIT NODE AT WHICH TO SET UP OBJ
SUP.CN:! BLOCK CN$SIZ ;DN60 LINE CONDITIONING BLOCK
SUP.ST:! BLOCK 1 ;NETWORK STATUS/FLAG BITS
;SEE 'NETSTS' BIT VALUES
SUP.SZ:! ;SIZE OF THE SETUP MESSAGE
DEPHASE
SUBTTL The RESPONSE-TO-SETUP Message -- Function 23
;The RESPONSE-TO-SETUP message is sent to QUASAR by a known component
; after the component receives a SETUP message for an object.
; !=======================================================!
; \ \
; \ The Message Header \
; \ \
; !=======================================================!
; ! The OBJect Type !
; !-------------------------------------------------------!
; ! The OBJect Unit Number !
; !-------------------------------------------------------!
; ! The NODE at which the OBJect Resides !
; !-------------------------------------------------------!
; ! The RESPONSE Code !
; !-------------------------------------------------------!
; ! RESPONSE REASON !
; !-------------------------------------------------------!
; ! The DEC Device Attributes !
; !=======================================================!
PHASE MSHSIZ ;STANDARD MESSAGE HEADER
RSU.TY:! BLOCK 1 ;OBJECT TYPE
RSU.UN:! BLOCK 1 ;UNIT NUMBER
RSU.NO:! BLOCK 1 ;NODE
RSU.CO:! BLOCK 1 ;RESPONSE CODE
%RSUOK==0 ;SETUP OK
%RSUNA==1 ;OBJECT NOT AVAILABLE (TRY AGAIN LATER)
%RSUDE==2 ;OBJECT DOESNT EXIST (DONT TRY AGAIN)
%RSUNC==3 ;OBJECT PORT/LINE NOT CONDITIONED
RSU.CD:! BLOCK 1 ;RESPONSE REASON
;SEE OBJECT STATUS CODES IN OBJECT
; QUEUE DESCRIPTION
RSU.DA:! BLOCK 1 ;DEC DEVICE ATTRIBUTES
RSU.SZ:!
DEPHASE
SUBTTL The HOLD/RELEASE Message -- Function 25
; !=======================================================!
; \ \
; \ THE MESSAGE HEADER \
; \ \
; !=======================================================!
; ! THE OBJECT QUEUE !
; !-------------------------------------------------------!
; ! FLAGS !
; !-------------------------------------------------------!
; \ \
; \ REQUEST DESCRIPTOR BLOCK \
; \ \
; !=======================================================!
PHASE MSHSIZ ;STANDARD MESSAGE HEADER
HBO.OT:! BLOCK 1 ;OBJECT TYPE (QUEUE)
HBO.FL:! BLOCK 1 ;FLAGS
HB.FRL==1B0 ;RELEASE FLAG
HBO.RQ:! BLOCK RDBSIZ ;THE RDB SPECIFIED
HBO.SZ:! ;SIZE OF THE HBO MESSAGE
DEPHASE
SUBTTL The SPOOL Message - Function 26 (sent by IPCC)
IFN FTUUOS,<
; !=======================================================!
; ! LENGTH ! FUNCTION 26 - SPOOL !
; !-------------------------------------------------------!
; ! JOB NUMBER ! JBTLOC(J) ! FLAGS !
; !-------------------------------------------------------!
; ! USERS NAME !
; ! 2 SIXBIT WORDS !
; !-------------------------------------------------------!
; ! DEVICE INIT'ED BY THE USER !
; !-------------------------------------------------------!
; ! STRUCTURE CONTAINING THE FILE !
; !-------------------------------------------------------!
; ! MONITOR GENERATED FILE NAME !
; !-------------------------------------------------------!
; ! ENTERED FILE NAME !
; !-------------------------------------------------------!
; ! FILE SIZE !
; !-------------------------------------------------------!
; ! FILE EXTENSION ! !
; !-------------------------------------------------------!
; ! NUMBER OF COPIES !
; !-------------------------------------------------------!
; ! FORMS NAME !
; !-------------------------------------------------------!
; ! OUTPUT LIMIT !
; !-------------------------------------------------------!
; !SFL! FLAGS !DEV TYPE !
; !-------------------------------------------------------!
; ! DEVICE ATTRIBUTES !
; !-------------------------------------------------------!
; ! NODE !
; !-------------------------------------------------------!
; ! AFTER PARAMETER !
; !=======================================================!
PHASE 0
SPL.HD:! BLOCK 1 ;THE HEADER FROM IPCC
SPL.JB:! BLOCK 1 ;USERS JOB NUMBER
SP.JOB==-1,,0 ;THE JOB NUMBER CLOSING THE SPOOLED FILE
SP.LOC==777B26 ;CURRENT REMOTE STATION (.LOCATE n)
SP.BAT==1B27 ;THIS IS FOR A BATCH JOB
SP.DFR==1B28 ;DEFERRED MODE SPOOLING
SPL.US:! BLOCK 2 ;THE USERS NAME (2 SIXBIT WORDS)
SPL.DV:! BLOCK 1 ;DEVICE INIT'ed BY THE USER (e.g. LPT0:)
SPL.ST:! BLOCK 1 ;STRUCTURE CONTAINING THIS FILE
SPL.FN:! BLOCK 1 ;MONITOR GENERATED FILE NAME
SPL.EN:! BLOCK 1 ;ENTERED FILE NAME
SPL.FS:! BLOCK 1 ;FILE SIZE (IN BLOCKS)
SPL.EX:! BLOCK 1 ;FILE EXTENSION
SP.EXT==-1,,0 ;IN LEFT HALF
SPL.CP:! BLOCK 1 ;# COPIES
SPL.FM:! BLOCK 1 ;FORMS NAME
SPL.LM:! BLOCK 1 ;OUTPUT LIMIT
SPL.SF:! BLOCK 1 ;SPOOLING FLAGS
SP.FLG==3B2 ;SPOOLING FLAG LOCATION
.SPDFD==1 ;DEFERED SPOOLING
.SPDFI==2 ;IMMEDIATE SPOOLING
SP.TYP==77 ;TYPE OF EDVICE
SPL.DA:! BLOCK 1 ;DEVICE ATTRIBUTES
SPL.ND:! BLOCK 1 ;NODE
SPL.AF:! BLOCK 1 ;AFTER PARM
SPL.SZ:! ;SIZE OF THE SPOOL MESSAGE
DEPHASE
> ;END IFN FTUUOS
IFN FTJSYS,<
; !=======================================================!
; ! FUNCTION 26 - SPOOL !
; !-------------------------------------------------------!
; ! # HEADER WORDS ! JOB NUMBER !
; !-------------------------------------------------------!
; ! FLAGS ! STATION NUMBER !
; !-------------------------------------------------------!
; ! PROGRAM NAME !
; !-------------------------------------------------------!
; ! BYTE SIZE ! NUMBER OF PAGES IN FILE !
; !-------------------------------------------------------!
; ! BYTE COUNT WHICH WOULD ADDRESS EOF !
; !-------------------------------------------------------!
; ! !
; / FILESPEC FOR SPOOLED FILE /
; ! !
; !=======================================================!
PHASE 0
SPL.HD:! BLOCK 1 ;HEADER FROM IPCC
SPL.JB:! BLOCK 1 ;JOB INFORMATION
SP.NHW==-1,,0 ;NUMBER OF HEADER WORDS
SP.JOB==0,,-1 ;JOB NUMBER
SPL.FL:! BLOCK 1 ;FLAGS
SP.BAT==1B0 ;JOB MAKE REQUEST IS A BATCH JOB
SP.DFR==1B1 ;REQUEST IS DEFERED
SP.LOC==0,,-1 ;STATION NUMBER
SPL.PG:! BLOCK 1 ;NAME OF PROGRAM WRITING FILE
SPL.BV:! BLOCK 1 ;CONTENTS OF FDBBYV
SP.SIZ==0,,-1 ;NUMBER OF PAGES IN FILE
SPL.EF:! BLOCK 1 ;BYTE COUNT WHICH ADDRESSES TO EOF
SPL.FI:! ;BEGINNING OF FILESPEC FOR SPOOLED FILE
SPL.SZ:! ;SPOOL MSG SIZE
DEPHASE
> ;END IFN FTJSYS
SUBTTL The LOGOUT Message - Function 27 (sent by IPCC)
IFN FTUUOS,<
; !=======================================================!
; ! LENGTH ! FUNCTION 27 - LOGOUT !
; !-------------------------------------------------------!
; ! JOB NUMBER ! JBTLOC(J) ! FLAGS !
; !=======================================================!
PHASE 0
LGO.HD:! BLOCK 1 ;THE HEADER FROM IPCC
LGO.JB:! BLOCK 1 ;USERS JOB NUMBER
LG.JOB==-1,,0 ;THE JOB NUMBER OF THE USER LOGGING OUT
LG.LOC==777B26 ;THE CURRENT REMOTE STATION NUMBER OF THIS JOB
LG.BAT==1B27 ;THIS IS A BATCH JOB
LG.DFR==1B28 ;DEFERRED MODE SPOOLING
LGO.SZ:! ;SIZE OF THE LOGOUT MESSAGE
DEPHASE
> ;END IFN FTUUOS
IFN FTJSYS,<
; !=======================================================!
; ! FUNCTION 27 - LOGOUT !
; !-------------------------------------------------------!
; ! NO. OF HEADER WORDS ! JOB NUMBER !
; !-------------------------------------------------------!
; ! FLAGS ! STATION NUMBER !
; !=======================================================!
PHASE 0
LGO.HD:! BLOCK 1 ;HEADER FROM IPCC
LGO.JB:! BLOCK 1 ;JOB INFORMATION
LG.NHW==-1,,0 ;NUMBER OF HEADER WORDS
LG.JOB==0,,-1 ;JOB NUMBER
LGO.FL:! BLOCK 1 ;FLAG WORD
LG.BAT==1B0 ;THIS WAS A BATCH JOB
LG.DFR==1B1 ;DEFERRED MODE SPOOLING
LG.LOC==0,,-1 ;JOBS STATION NUMBER
LGO.SZ:! ;SIZE OF THE LOGOUT MESSAGE
DEPHASE
> ;END IFN FTJSYS
SUBTTL TAPE ONLINE MESSAGE Function 31 (sent by IPCC)
TOPS10 <
; !=======================================================!
; ! Length ! Function code !
; !-------------------------------------------------------!
; ! Device Name (Sixbit) !
; !-------------------------------------------------------!
; ! !Device Type !
; !=======================================================!
PHASE 0
.TONHD:! BLOCK 1 ;TAPE ONLINE MESSAGE HEADER
.TONDV:! BLOCK 1 ;TAPE ONLINE DEVICE
.TONST:! BLOCK 1 ;TAPE ONLINE DEVICE TYPE
TON.TY==77 ;DEVICE TYPE
DEPHASE
>
SUBTTL THE DEVICE STATUS UPDATE MESSAGE - FUNCTION 31
; !====================================================== !
; \ \
; \ THE MESSAGE HEADER \
; \ \
; !=======================================================!
; \ \
; \ THE REQUESTED OBJECT BLOCK \
; \ \
; !=======================================================!
; ! THE DEVICE STATUS CODE !
; !=======================================================!
PHASE MSHSIZ ;STANDARD MESSAGE HEADER
STU.RB:! BLOCK OBJ.SZ ;THE OBJECT BLOCK YOU WANT
STU.CD:! BLOCK 1 ;THE DEVICE STATUS CODE
STU.SZ:!
DEPHASE
SUBTTL TAPE DEASSIGN/DISMOUNT MESSAGE (IPCC FUNCTION 34)
; !=======================================================!
; ! 3 ! 34 !
; !-------------------------------------------------------!
; ! SIXBIT DEVICE NAME !
; !-------------------------------------------------------!
; ! DEVICE TYPE !
; !-------------------------------------------------------!
; ! JOB NUMBER !
; !=======================================================!
PHASE 0
.TDHDR:! BLOCK 1 ;HEADER
.TDDEV:! BLOCK 1 ;SIXBIT DEVICE NAME
.TDDVT:! BLOCK 1 ;DEVICE TYPE
.TDJBN:! BLOCK 1 ;USER JOB NUMBER
DEPHASE
SUBTTL NODE-WENT-AWAY NOTIFICATION MESSAGE (FUNCTION 36)
; !=======================================================!
; ! !
; ! MESSAGE HEADER !
; ! !
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
; ! ARGUMENT COUNT !
; !-------------------------------------------------------!
; THE ONLY BLOCK DEFINED FOR THIS MESSAGE IS .OROBJ
; IT DEFINES THE NODE WHICH WENT OFFLINE
; The .OFLAG word will contain a port,,line # if the node was
; an IBM remote. It will be zero otherwise.
; Also: If the %ONLINE bit is lit in .MSFLG then this msg
; is a Node-Online Message
%ONLINE==1B3 ;MAKE THIS A NODE ONLINE MESSAGE
SUBTTL .QOCQE - CREATE QUEUE ENTRY MESSAGE (FUNCTION 37)
; !=======================================================!
; ! !
; ! MESSAGE HEADER !
; ! !
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
; ! ARGUMENT COUNT !
; !-------------------------------------------------------!
;NOTE::: THE QUEUE TYPE BLOCK (.QCQUE) MUST PRECEED THE
;DEFINITIONS OF THE QUEUE DEPENDANT BLOCKS
;THE MESSAGE BLOCK TYPES ARE:
.QCFIL==10 ;FILE SPEC BLOCK
;This block is the Standard Galaxy FD with .QCFIL put in
;the right half of the .FDLEN word.
.QCCOP==11 ;NUMBER OF COPIES BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCCOP !
; !-------------------------------------------------------!
; ! THE NUMBER OF COPIES OF THE FILE TO !
; ! BE OUTPUT !
; !-------------------------------------------------------!
.QCFRM==12 ;FORMS TYPE BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCFRM !
; !-------------------------------------------------------!
; ! THE FORMS TYPE YOU WANT (SIXBIT) !
; !-------------------------------------------------------!
.QCPTP==13 ;FILE FORMAT BLOCK (ASCII, FORTRAN, ETC)
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCPTP !
; !-------------------------------------------------------!
; ! THE FILE FORMAT TYPE (SEE .FPINF - FP.FFF) !
; !-------------------------------------------------------!
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
.QCODP==14 ;/DISP: OUTPUT DISPOSITION BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCODP !
; !-------------------------------------------------------!
; ! OUTPUT FILE DISPOSITION - MUST BE 1 (FOR DELETE) !
; !-------------------------------------------------------!
.QCUNT==15 ;UNIT TYPE (/UNIT:, /LOWER, /UPPER)
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCUNT !
; !-------------------------------------------------------!
; ! DEVICE ATTRUBUTES ( %LOWER,%UPPER,%GENRC,%PHYCL) !
; !-------------------------------------------------------!
.QCAFT==16 ;/AFTER BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCAFT !
; !-------------------------------------------------------!
; ! /AFTER TIME (IN UDT FORMAT) !
; !-------------------------------------------------------!
.QCLIM==17 ;LIMIT BLOCK (/TIME:, /PAGES:, ETC)
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCLIM !
; !-------------------------------------------------------!
; ! LIMIT BLOCK (# OF PAGES,ETC or TIME IN SECS) !
; !-------------------------------------------------------!
.QCUNI==20 ;/UNIQUE BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCUNI !
; !-------------------------------------------------------!
; ! /UNIQUE: VALUE (%EQUNO or %EQUYE) !
; !-------------------------------------------------------!
.QCRES==21 ;/RESTART BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCRES !
; !-------------------------------------------------------!
; ! /RESTART: VALUE (%EQRNO or %EQRNY) !
; !-------------------------------------------------------!
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
.QCLOG==22 ;/OUTPUT: (LOG,NOLOG,ERROR)
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCLOG !
; !-------------------------------------------------------!
; ! /OUTPUT: VALUE (%EQONL or %EQOLG or %EQOLE) !
; !-------------------------------------------------------!
.QCACT==23 ;/ACCOUNT: ACCOUNT STRING BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH ! .QCACT !
; !-------------------------------------------------------!
; \ \
; \ USERS ACCOUNT STRING IN ASCIZ \
; \ \
; !-------------------------------------------------------!
.QCQUE==24 ;QUEUE TYPE BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCQUE !
; !-------------------------------------------------------!
; ! QUEUE TYPE (SEE GLXMAC OBJ.TY FIELD) !
; !-------------------------------------------------------!
.QCNOD==25 ;/NODE: DESTINATION NODE BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCNOD !
; !-------------------------------------------------------!
; ! DESTINATION NODE NUMBER OR SIXBIT NODE NAME !
; !-------------------------------------------------------!
.QCNAM==26 ;USERS NAME BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH ! .QCNAM !
; !-------------------------------------------------------!
; \ \
; \ USERS NAME (ASCIZ ON -20, SIXBIT ON THE -10) \
; \ \
; !-------------------------------------------------------!
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
.QCOID==27 ;USERS NUMBER BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCOID !
; !-------------------------------------------------------!
; ! USERS ID (36 BIT USER ID ON -20, PPN ON -10) !
; !-------------------------------------------------------!
.QCNOT==30 ;/NOTIFY BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCNOT !
; !-------------------------------------------------------!
; ! /NOTIFY VALUE (%NOTTY, %NOTML, %NOTJB) !
; !-------------------------------------------------------!
.QCBLT==31 ;/BATLOG: BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCBLT !
; !-------------------------------------------------------!
; ! /BATLOG VALUE (%BAPND or %BSCDE or %BSPOL) !
; !-------------------------------------------------------!
.QCJBN==32 ;JOB NAME
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCJBN !
; !-------------------------------------------------------!
; ! SIXBIT JOB NAME !
; !-------------------------------------------------------!
.QCCDI==33 ;CONNECTED DIRECTORY BLOCK (-20 ONLY)
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCCDI !
; !-------------------------------------------------------!
; ! 36 BIT CONNECTED DIRECTORY NUMBER !
; !-------------------------------------------------------!
.QCNTE==34 ;/NOTE: BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH 1-2 ! .QCNTE !
; !-------------------------------------------------------!
; \ \
; \ 1 TO 12 SIXBIT CHARACTERS \
; \ \
; !-------------------------------------------------------!
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
.QCBGN==35 ;/BEGIN: BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCBGN !
; !-------------------------------------------------------!
; ! BEGINNING PAGE NUMBER FOR STARTING OUTPUT !
; !-------------------------------------------------------!
.QCPRI==36 ;/PRIORITY: BLOCK
; !-------------------------------------------------------!
; ! BLOCK LENGTH (2) ! .QCPRI !
; !-------------------------------------------------------!
; ! PRIORITY (1 TO 20 OR 1 TO 77) !
; !-------------------------------------------------------!
SUBTTL RECOGNIZE MESSAGE (FUNCTION .QOREC - 40)
TOPS10<
; !=======================================================!
; / /
; / MESSAGE HEADER /
; / /
; !-------------------------------------------------------!
; ! BLOCK COUNT (1) !
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
;THE ONLY BLOCK DEFINED IS .RECDV WHICH CONTAINS THE
;SIXBIT DEVICE NAME
.RECDV==3 ;DEFINE THE DEVICE NAME BLOCK TYPE
; !-------------------------------------------------------!
; ! 2 ! .RECDV !
; !-------------------------------------------------------!
; ! SIXBIT DEVICE NAME !
; !=======================================================!
PHASE 0
.RECDN:! BLOCK 1 ;SIXBIT DEVICE NAME
.RECSZ:! ;SIZE OF THE BLOCK
DEPHASE
>;END TOPS10
SUBTTL Tape status message (.QOTST functions 41)
TOPS10<
; !=======================================================!
; / /
; / MESSAGE HEADER /
; / /
; !-------------------------------------------------------!
; ! BLOCK COUNT (1) !
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
;The only legal block type in this message is .TLVOL, described below
; !-------------------------------------------------------!
; ! 4 ! .TLVOL !
; !-------------------------------------------------------!
; ! SIXBIT DEVICE NAME !
; !-------------------------------------------------------!
; !OFL!WLK!DEN!LAB! !
; !-------------------------------------------------------!
; ! SIXBIT VOLUME ID !
; !=======================================================!
PHASE 0
.TLDRV:!BLOCK 1 ;SIXBIT DEVICE NAME
.TLSTS:!BLOCK 1 ;STATUS BITS
TS.OFL==1B0 ;ON IF UNIT IS OFF-LINE
TS.LOK==1B1 ;ON IF UNIT IS WRITE-LOCKED
TS.DEN==77B8 ;ACTUAL DENSITY OF TAPE (SEE UUOSYM)
TS.LAB==77B14 ;LABEL TYPE (SEE UUOSYM)
.TLVOL:!BLOCK 1 ;SIXBIT VOLUME ID
.TLSIZ:!
DEPHASE
>;END TOPS10
SUBTTL TAPE DRIVE UNLOAD MESSAGE (FUNCTION .QOUNL - 42)
;ALSO TAPE DRIVE REWIND MESSAGE (FUNCTION .QOREW - 47)
; !=======================================================!
; / /
; / MESSAGE HEADER /
; / /
; !-------------------------------------------------------!
; ! BLOCK COUNT (1) !
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
;THE ONLY BLOCK DEFINED IS .RECDV WHICH CONTAINS THE
;SIXBIT DEVICE NAME
; !-------------------------------------------------------!
; ! 2 ! .RECDV !
; !-------------------------------------------------------!
; ! SIXBIT DEVICE NAME !
; !=======================================================!
SUBTTL Volume Mounted message to tape labeller (.QOVMN = 43)
TOPS10<
; !=======================================================!
; / /
; / MESSAGE HEADER /
; / /
; !-------------------------------------------------------!
; ! BLOCK COUNT (2) !
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
;ONE BLOCK IS .RECDV WHICH CONTAINS THE
;SIXBIT DEVICE NAME
; !-------------------------------------------------------!
; ! 2 ! .RECDV !
; !-------------------------------------------------------!
; ! SIXBIT DEVICE NAME !
; !=======================================================!
;THERE IS ONE VOLUME (SET) BLOCK ATTACHED TO THE MESSAGE
;THIS BLOCK DESCRIBE THE INITIAL VOLUME BEING GIVEN TO THE
;USER AND THE FIRST VOLUME IN THE VOLUME SET
.VOLMN==4 ;BLOCK TYPE FOR THE VOLUME BLOCK
; !-------------------------------------------------------!
; ! SIXBIT VOLUME ID FOR MOUNTED VOLUME !
; !-------------------------------------------------------!
; ! SIXBIT VOLUME ID FOR FIRST VOLUME IN SET !
; !-------------------------------------------------------!
; !LABEL TYPE!WLOCK!JOB #! !
; !-------------------------------------------------------!
PHASE 0 ;DEFINE THE CONTENTS OF THE BLOCK
.VMNIV:! BLOCK 1 ;SIXBIT NAME OF INITIAL VOLUME
.VMNFV:! BLOCK 1 ;SIXBIT NAME OF FIRST VOL IN SET
.VMNIN:! BLOCK 1 ;INFORMATION ABOUT THE VOL SET
VI.LTY==77B5 ;LABEL TYPE
VI.WLK==1B6 ;WRITE LOCKED IF 1
VI.JOB==777B17 ;JOB NUMBER OF REQUESTOR
.VMNSZ:! ;SIZE OF THE BLOCK (WITHOUT HEADER)
>;END TOPS10
SUBTTL Volume dismounted message to tape labeller (.QOVDS = 44)
TOPS10<
; !=======================================================!
; / /
; / MESSAGE HEADER /
; / /
; !-------------------------------------------------------!
; ! BLOCK COUNT (1) !
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
;THE ONLY BLOCK DEFINED IS .RECDV WHICH CONTAINS THE
;SIXBIT DEVICE NAME
; !-------------------------------------------------------!
; ! 2 ! .RECDV !
; !-------------------------------------------------------!
; ! SIXBIT DEVICE NAME !
; !=======================================================!
>;END TOPS10
SUBTTL Volume switch request from tape labeller (.QOVSR = 45)
TOPS10<
; !=======================================================!
; / /
; / MESSAGE HEADER /
; / /
; !-------------------------------------------------------!
; ! BLOCK COUNT (2) !
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
;ONE BLOCK IS A .RECDV BLOCK WHICH HAS THE
;SIXBIT DEVICE NAME OF THE DRIVE NEEDING A NEW VOLUME
; !-------------------------------------------------------!
; ! 2 ! .RECDV !
; !-------------------------------------------------------!
; ! SIXBIT DEVICE NAME !
; !=======================================================!
;THE OTHER BLOCK DESCRIBES WHICH VOLUME OF THE SET IS
;NEEDED BY THE USER ON THAT DRIVE
; !-------------------------------------------------------!
; ! 2 ! .RLVOL !
; !-------------------------------------------------------!
; !WRT! RELATIVE VOLUME CODE !
; !=======================================================!
.RLVOL=4
PHASE 0
.RLVCD:! BLOCK 1 ;SPACE FOR THE RELATIVE VOLUME CODE
%VWRT==1B0 ;WANT TO USE 'NEXT' VOLUME FOR WRITING
RLV.CD==7 ;WHERE THE CODE GOES
%RLNXT==1 ;GET THE NEXT VOLUME
%RLPRV==2 ;GET THE PREVIOUS VOLUME
%RLFIR==3 ;GET THE FIRST VOLUME OF THE SET
.RLVSZ:! ;SIZE OF THIS BLOCK
DEPHASE
>;END TOPS10
SUBTTL Volume Switch Directive From MDA to Tape Labeler (.QOVSD - 46)
TOPS10<
;This message is sent by MDA in response to a volume switch request
; message from the tape labeller. It directs the labeller
; to continue the labelling process on the same drive
; or on another drive which the OPR/MDA has chosen
; !=======================================================!
; / /
; / MESSAGE HEADER /
; / /
; !-------------------------------------------------------!
; ! BLOCK COUNT (1) !
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
;Flags for this message
%VEOF==1B0 ;There are no more volumes in the set
;give EOT to the requestor
%VABT==1B1 ;OPR has aborted the volume
;switch request
;There are two blocks passed on this message
;One is the Volume set directive block which describes
;the two drives being swapped, and the other is a Volume
;info block describing the new volume in use, its label type,
;and its write enable/lock status
.VSDBL==12 ;VOLUME SET DIRECTIVE BLOCK
; !-------------------------------------------------------!
; ! 4 ! .VSDBL !
; !-------------------------------------------------------!
; ! INITIAL DRIVE NAME IN SIXBIT !
; !-------------------------------------------------------!
; ! CURRENT DRIVE NAME IN SIXBIT !
; !-------------------------------------------------------!
; ! CURRENT VOLUME NAME !
; !=======================================================!
PHASE 0
.VSDID:! BLOCK 1 ;INITIAL DRIVE NAME
.VSDCD:! BLOCK 1 ;CURRENT DRIVE NAME
VSDLEN:! ;BLOCK LENGTH
DEPHASE
>;END TOPS10
SUBTTL IPCF Parameters
; !=======================================================!
; \ \
; \ QUEUE ENTRY HEADER \
; \ \
; !=======================================================!
; ! FLAGS !
; !-------------------------------------------------------!
; ! SENDER'S PID !
; !-------------------------------------------------------!
; ! RECEIVER'S PID !
; !-------------------------------------------------------!
; ! COUNT OF WORDS ! ADDRESS OF MESSAGE !
; !-------------------------------------------------------!
; ! SENDER'S ID !
; !-------------------------------------------------------!
; ! SENDER'S CAPABILITIES (PRIVS) !
; !-------------------------------------------------------!
; ! !
; \ SENDER'S ACCOUNT STRING \
; \ (10 WORDS) \
; ! !
; !-------------------------------------------------------!
;
; ! ----- TOPS 20 ----- !
; ! !
; !-------------------------------------------------------!
; ! CONNECTED DIRECTORY OF SENDER !
; !-------------------------------------------------------!
; \ \
; \ END TOPS 20 \
;
; !-------------------------------------------------------!
; ! SENDER'S SPECIAL INDEX !
; !=======================================================!
PHASE QEHSIZ ;APPEND TO THE QUEUE-ENTRY-HEADER
IPCFLG:! BLOCK 1 ;FLAGS (SEE UUOSYM.MAC FOR DEFINITIONS)
IPCSDR:! BLOCK 1 ;SENDERS PID
IPCRCR:! BLOCK 1 ;RECEIVERS PID
IPCMES:! BLOCK 1 ;MESSAGE INFORMATION
IPM.CT==-1,,0 ;COUNT OF WORDS
IPM.AD==0,,-1 ;ADDRESS OF THE MESSAGE
IPCHSZ==.-IPCFLG ;SIZE OF THE PDB FOR SEND
IPCSID:! BLOCK 1 ;SENDERS ID
IPCPRV:! BLOCK 1 ;SENDERS CAPABILITIES (PRIVS)
IPCACT:! BLOCK 10 ;SENDERS ACCOUNT STRING.
IFN FTUUOS,<
IPCCDI==IPCSID ;CONNECTED DIR=SENDER'S ID
> ;END IFN FTUUOS
IFN FTJSYS,<
IPCCDI:! BLOCK 1 ;CONNECTED DIRECTORY OF SENDER
> ;END IFN FTJSYS
IPCRSZ==.-IPCFLG ;SIZE OF THE PDB FOR RECEIVE
IPCIDX:! BLOCK 1 ;SENDER'S SPECIAL INDEX
IPS.FL==SI.FLG ;GLXMAC SYMBOLS, FLAG FOR VALIDITY
IPS.IX==SI.IDX ; AND INDEX WHEN IPS.FL IS ON
IPCDAT:!
IPCSIZ:! ;SIZE OF AN IPCF ENTRY (NOT COUNTING
; THE MESSAGE)
DEPHASE
;WHEN CALLING C$SEND FOR IPCF SENDS, BITS LIT IN AP ARE:
IPS.TF==1B0 ;TRY FIRST (IGNORE SCAN OF IPS QUEUE)
IPS.ID==1B1 ;IGNORE DUPLICATE (REQUESTED PID IN IPS)
IPS.IF==1B2 ;IGNORE FAILURE (THROW AWAY PACKET)
SUBTTL Common Parameters
;THE PARAMETERS DEFINED HERE ARE ONES THAT ARE NEEDED BY QUASAR BUT ARE
;SYSTEM DEPENDENT. TO MINIMIZE FEATURE TESTS AND DUPLICATION OF ROUTINES,
;QUASAR PARAMETERS ARE USED AND EQUATED TO THE CORRECT SYSTEM VALUE.
;**NOTE: THESE VALUES ARE NOT TO BE CONSTRUED AS 'OPTIONS' AND ANY CHANGES
; WILL CAUSE UNPREDICTABLE RESULTS.
SYSPRM ACC.KM,.ACREN,.CKAWT ;KILL/MODIFY ACCESS CODE
SYSPRM INT.PI,0,0 ;IPCF INTERRUPT CHANNEL OR OFFSET
SYSPRM INT.PL,1,1 ;IPCF PRIORITY INTERRUPT LEVEL
SYSPRM FSSBKS,200,1000 ;STANDARD BLOCKSIZE
SYSPRM FSSFIB,2,1 ;BLK. # OF 1ST INDEX BLK
SUBTTL Random Macros
;DOSCHD is a macro which may be called to flag that something has
; happened which might allow a scheduling pass to bear fruit.
DEFINE DOSCHD,<
IFN <%%.MOD-<SIXBIT /QUASAR/>>,<EXTERN G$SCHD>
SETOM G$SCHD
> ;END DEFINE DOSCHD
SUBTTL Failsoft System Definitions
;I/O CHANNELS
ND CMQ1,10 ;FIRST MASTER QUEUE CHANNEL
ND CMQ2,11 ;SECOND MASTER QUEUE CHANNEL
;OTHER SYMBOLS
XP FSSSTR,FSSSTR ;STRUCTURE FOR MASTER QUEUES
ND FSSPRT,277 ;PROTECTION FOR MASTER QUEUES
;FILE FORMAT AND INDEX DEFINITIONS
XP FSSQFV,%%.QSR ;QUEUE FILE VERSION
XP FSSMRS,1000 ;MAXIMUM REQUEST SIZE
XP FSSBPR,<FSSMRS/FSSBKS> ;MAXIMUM BLOCKS/REQUEST
XP FSSWPI,1000 ;NUMBER OF WORDS/INDEX
XP FSSNIB,<FSSWPI/FSSBKS> ;NUMBER OF INDEX BLOCKS/SECTION
XP FSSFDB,<FSSFIB+FSSNIB> ;BLK. NO. OF FIRST DATA BLOCK
XP FSSBPS,FSSWPI ;BLOCKS PER SECTION
XP FSSMNS,5 ;MAXIMUM NUMBER OF SECTIONS
;MASTER FILE NAMES
IFN FTUUOS,<
DEFINE MQFNM1,<SIXBIT\QSRMS1\> ;THE PRIMARY MASTER
DEFINE MQFNM2,<SIXBIT\QSRMS2\> ; REDUNDANT MASTER
ND DFSSTR,<SIXBIT /DSK/> ;STRUCTURE TO USE IF DEBUGGING
ND SPLSTR,<SIXBIT/DSK/> ;SPOOL STRUCTURE
> ;END OF IFN FTUUOS
IFN FTJSYS,<
DEFINE MQFNAM,<ASCIZ\DSK:<SPOOL>PRIMARY-MASTER-QUEUE-FILE.QUASAR\>
DEFINE DMQFNM,<ASCIZ \DSK:PRIVATE-MASTER-QUEUE-FILE.QUASAR\>
ND SPLSTR,<ASCII/DSK:/> ;SPOOL STRUCTURE
> ;END OF IFN FTJSYS
;REBUILD CODES
; A REBUILD CODE IS STORED IN THE FILE INDEX ENTRY FOR EACH REQUEST
; IN THE MASTER QUEUE FILE. AT QUASAR INITIALIZATION THE CORRECT
; ROUTINE IS CALLED WITH THE ENTRY BASED ON THE REBUILD CODE.
%RBBAT==1 ;BATCH JOB (INP, LPT, PLT, ...)
%RBDEL==2 ;DELETED FILES
SUBTTL QUASAR Fatal Error Codes
;ARGUMENTS USED ARE
; X 'SUFFIX' , 'TEXT' , 'ERROR SEVERITY'
;THE EXPANDER IS TO DEFINE THE CORRECT 'X' MACRO
DEFINE ERRCDS,<
XLIST
X BMG,<Bad MODIFY Group>,MF.FAT
X ICM,<Illegal CREATE Message>,MF.FAT
X IFS,<Illegal File Specification>,MF.FAT
X ILM,<Illegal LIST Message>,MF.FAT
X IFD,<Illegally Formatted Device Name>,MF.FAT
X IMT,<Illegal Message Type>,MF.FAT
X INF,<Illegal Number of Files>,MF.FAT
X IPE,<Insufficient Privileges Enabled>,MF.FAT
X MTL,<Message Too Long>,MF.FAT
X MTS,<Message is Too Short>,MF.FAT
X NKC,<Not a Known Component>,MF.FAT
X NOR,<Number Out of Range>,MF.FAT
X NYO,<Not Your Object>,MF.FAT
X SNY,<Specified request is Not Yours>,MF.FAT
X UQS,<Unknown Queue Specified>,MF.FAT
X UOS,<Unknown Object Specified>,MF.FAT
X WVN,<Wrong Version Number>,MF.FAT
X IAS,<Invalid Account String Specified>,MF.FAT
X OHR,<Operator Has Restricted Queue Entry Commands>,MF.FAT
X IMM,<Illegal MOUNT Message>,MF.FAT
X MPN,<MOUNT Request Processor Not Running>,MF.FAT
X CDU,<Can't Default User Name>,MF.FAT
X CDD,<Can't Default Connected Directory>,MF.FAT
X NVM,<No Volume Mounted On Drive>,MF.FAT
X VAU,<Volume is Already in Use>,MF.FAT
X DAU,<Drive is Already in Use>,MF.FAT
X VIL,<Volume on Drive is Labeled>,MF.FAT
X URB,<User Requested Bypass Label Volumes>,MF.FAT
X URL,<User Requested Labeled Volumes>,MF.FAT
X URW,<User Requested Write-Locked Volumes>,MF.FAT
X URE,<User Requested Write-Enabled Volumes>,MF.FAT
X RDD,<Requested Density Does not Match Volume Density>,MF.FAT
X VND,<Requested Volume not on this Device>,MF.FAT
X IUD,<Illegal For UNAVAILABLE Device>,MF.FAT
X NSD,<No Such Device>,MF.FAT
X RLD,<Request Label Type Doesn't Match Volume Label Type>,MF.FAT
X DAD,<Drive is already available>,MF.FAT
X CDA,<Can't Delete an Allocated request>,MF.FAT
X CNI,<Command Not Yet Implemented>,MF.FAT
X IMO,<Invalid Message from ORION>,MF.FAT
X PRB,<Privileges Required for Bypass Label Processing>,MF.FAT
X NVI,<VOLID Required for This Volume>,MF.FAT
X CIU,<Cannot IDENTIFY the Users Current Volume>,MF.FAT
X ICD,<Illegal Connected Directory Specified>,MF.FAT
LIST
SALL
> ;END OF DEFINE ERRCDS
DEFINE X(CODE,STRING,FLAGS),<
ER$'CODE==..XX
..XX=..XX+1
>;END DEFINE X
..XX==1
ERRCDS ;DEFINE THE ERROR OFFSETS
SUBTTL Definition of the Known Queues
;ARGUMENTS USED ARE
; X 'QUENAME' , 'ENTRYSIZE' , 'TYPE' , 'FLAGS' , 'SCHEDULER'
DEFINE QUEUES,<
XLIST
X INP,QNTSIZ,.QHTIP,0,S$INPT,LIQBAT
X LPT,QNTSIZ,.QHTOU,0,S$LPT,LIQLPT
X PTP,QNTSIZ,.QHTOU,0,S$PTP,LIQPTP
X CDP,QNTSIZ,.QHTOU,0,S$CDP,LIQCDP
X PLT,QNTSIZ,.QHTOU,0,S$PLT,LIQPLT
X RET,QNTSIZ,.QHTAR,QH.INV,S$RET,LIQRET
X NOT,QNTSIZ,.QHTAR,QH.INV,S$NOT,0
X BIN,QNTSIZ,.QHTIP,QH.INV,S$BIN,0
X XFR,QNTSIZ,.QHTOU,QH.INV,S$XFR,0
X DBM,QNTSIZ,.QHTOU,QH.INV,S$DBM,0
X RDR,QNTSIZ,.QHFRR,0,S$RDR,0
X IPC,IPCSIZ,.QHTQS,QH.IPC!QH.INV,0,0
X IPS,IPCSIZ,.QHTQS,QH.IPC!QH.INV,0,0
X SPL,SPLSIZ,.QHTQS,QH.INV,0,0
X PSB,PSBSIZ,.QHTQS,QH.INV,0,0
X OBJ,OBJSIZ,.QHTQS,QH.INV,0,0
X USE,USESIZ,.QHTQS,QH.INV,0,0
X STR,STRSIZ,.QHTQS,QH.INV,0,0
X NET,NETSIZ,.QHTQS,QH.INV,0,0
LIST
> ;END OF DEFINE QUEUES
;DEFINE THOSE QUEUES WHICH ARE DEVICES.
DEFINE DEVQUE,<
X BAT
X LPT
X CDP
X PTP
X PLT
X MNT
X RET
> ;END OF DEVICE QUEUES MACRO
MAX <QNTSIZ> ;INCLUDE ANY QUEUE THAT CAN HAVE AFTER OR INUSE
USESIZ==MAXSIZ ;DEFINE LARGEST ENTRY IN USE QUEUE
RDESIZ==MAXSIZ ;DEFINE LARGEST ENTRY IN RDE QUEUE
DEFINE QUEHDR,< ;MACRO TO GENERATE THE QUEUE HEADERS FROM THE QUEUES MACRO
DEFINE X(A,B,C,D,E,F),< ;DEFINE X FOR THE LATER EXPANSION OF QUEUES
HDR'A:: INSVL.(<SIXBIT\ A\>,QH.NAM)!INSVL.(C,QH.TYP)!D
EXP 0
IFDIF <E> <0> ,<GLOB(E)>
XWD E,INSVL.(B,QH.SIZ)
EXP F
EXP 0
> ;END OF DEFINE X
QUEUES ;NOW EXPAND QUEUES
> ;END OF DEFINE QUEHDR
SUBTTL MTCON MOUNT STRUCTURES
;MOUNT REQUEST (SENT BY USER TO QUASAR)
; !=======================================================! /+\
; \ \ !
; \ THE MESSAGE HEADER \ !
; \ \ !
; !=======================================================! !
; ! FLAGS THAT APPLY TO THE ENTIRE MESSAGE ! !
; !-------------------------------------------------------! LM
; ! SIXBIT NAME OF MOUNT REQUEST ! !
; !-------------------------------------------------------! !
; ! MOUNT ENTRY COUNT (MUST BE 1 FOR RLS 4) ! !
; !=======================================================! !
; ! ----- TOPS 10 ----- ! !
; ! ! !
; !-------------------------------------------------------! !
; ! SIXBIT USER NAME ! !
; ! (2 WORDS) ! !
; !-------------------------------------------------------! !
; ! ! !
; \ USER ACCOUNT STRING \ !
; \ IN ASCIZ \ !
; \ (10 WORDS) \ !
; ! ! !
; !=======================================================! \./
PHASE MSHSIZ
.MMFLG:! BLOCK 1 ;FLAG WORD FOR MOUNT MESSAGE
MM.WAT==1B0 ;USER IS WAITING FOR IPCF ACK WHEN DONE
MM.NOT==1B1 ;USER WANTS NOTIFICATION VIA TRMOP.
.MMNAM:! BLOCK 1 ;SIXBIT NAME OF MOUNT REQUEST
.MMARC:! BLOCK 1 ;ARGUMENT COUNT FOR MOUNT MESSAGE
TOPS10 <
.MMUSR:! BLOCK EQNMSZ ;SIXBIT USER NAME
.MMUAS:! BLOCK 10 ;ASCIZ USER ACCOUNT STRING
>
.MMHSZ:! ;SIZE OF MOUNT MESSAGE HEADER
DEPHASE
SUBTTL MOUNT REQUESTS (WITHIN THE MESSAGE)
;!=======================================================! /+\
;! ENTRY LENGTH (LE) ! TYPE CODE ! !
;!-------------------------------------------------------! !
;! REQUEST-SPECIFIC FLAGS ! !
;!-------------------------------------------------------! !
;! SUBENTRY COUNT ! !
;!-------------------------------------------------------! !
;! SUBENTRY # 1 ! !
;!-------------------------------------------------------! LE
;! SUBENTRY # 2 ! !
;!-------------------------------------------------------! !
;! . ! !
;! . ! !
;! . ! !
;!-------------------------------------------------------! !
;! SUBENTRY # n ! !
;!=======================================================! \./
PHASE 0
.MEHDR:! BLOCK 1 ;MOUNT ENTRY HEADER WORD
.MNTTP==1 ;Tape Mount Request Code
.MNTST==2 ;Disk Mount Request Code
.DSMST==3 ;Disk Dismount Request Code
.MEFLG:! BLOCK 1 ;FLAG WORD FOR ENTRY
.MECNT:! BLOCK 1 ;SUBENTRY COUNT
.MEHSZ:! ;SIZE OF HEADER
DEPHASE
PHASE 0
ARG.HD:! BLOCK 1 ;SUBENTRY HEADER WORD
AR.LEN=-1,,0 ;LENGTH OF SUBENTRY
AR.TYP=0,,-1 ;TYPE OF SUBENTRY
ARG.DA:! ;START OF DATA AREA
DEPHASE
SUBTTL TAPE MOUNT REQUEST BLOCKS
.MDINV==0 ;BLOCK TYPE 0 IS INVALID
.TMDEN==1 ;MAG TAPE DENSITY CODE (.SJDxx)
; !-------------------------------------------------------!
; ! 2 ! .TMDEN !
; !-------------------------------------------------------!
; ! The Tape Density Code !
; !-------------------------------------------------------!
.TMDRV==2 ;MAG TAPE DRIVE TYPE
; !-------------------------------------------------------!
; ! 2 ! .TMDRV !
; !-------------------------------------------------------!
; ! .TMDR9 or .TMDR7 !
; !-------------------------------------------------------!
.TMDR9==1 ;Nine Track Drive
.TMDR7==2 ;Seven Track Drive
.TMDMX==2 ; ?
.TMLT==3 ;Mag TAPE LABEL TYPE
; !-------------------------------------------------------!
; ! 2 ! .TMLT !
; !-------------------------------------------------------!
; ! .LTUNL or .LTANS or .LTEBC or .LTT20 !
; !-------------------------------------------------------!
.TMSET==4 ;MAG TAPE SET NAME
; !-------------------------------------------------------!
; ! 2 ! .TMSET !
; !-------------------------------------------------------!
; ! sixbit Volume Set Name !
; !-------------------------------------------------------!
.TMRMK==5 ;Asciz Remark for the Operator
; !-------------------------------------------------------!
; ! length ! .TMRMK !
; !-------------------------------------------------------!
; \ \
; \ An Asciz remark for the OPR \
; \ \
; !-------------------------------------------------------!
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
.TMSTV==6 ;Mag Tape Starting Volume
; !-------------------------------------------------------!
; ! 2 or 3 ! .TMSTV !
; !-------------------------------------------------------!
; ! Index into Volume set if length = 2 !
; !-------------------------------------------------------!
; ! Sixbit volume Id (Length = 3 & word 2 = 0) !
; !-------------------------------------------------------!
.TMVOL==7 ;Volume List
; !-------------------------------------------------------!
; ! Length ! !
; !-------------------------------------------------------!
; \ \
; \ Sixbit list of volumes \
; \ \
; !-------------------------------------------------------!
.TMVPR==10 ;Volume Protection code For new volumes
; !-------------------------------------------------------!
; ! 2 ! .TMVPR !
; !-------------------------------------------------------!
; ! 0 ! Protection Code !
; !-------------------------------------------------------!
.TMINI==11 ;Volume Initialization Parms
; !-------------------------------------------------------!
; ! 2 or 3 ! .TMINI !
; !-------------------------------------------------------!
; ! Tape Label Type !
; !-------------------------------------------------------!
; ! User Number (Optional) !
; !-------------------------------------------------------!
;CONTINUED ON THE NEXT PAGE
;CONTINUED FROM THE PREVIOUS PAGE
.SMNAM==12 ;Disk Structure Name in sixbit
; !-------------------------------------------------------!
; ! 2 ! .SMNAM !
; !-------------------------------------------------------!
; ! Sixbit Structure Name !
; !-------------------------------------------------------!
.SMALI==13 ;Disk Structure Alias Name in sixbit
; !-------------------------------------------------------!
; ! 2 ! .SMALI !
; !-------------------------------------------------------!
; ! Sixbit Structure Alias !
; !-------------------------------------------------------!
.TMLNM==14 ;VOLUME SET LOGICAL NAME
; !-------------------------------------------------------!
; ! 2 ! .TMLNM !
; !-------------------------------------------------------!
; ! The Logical Volume Set name !
; !-------------------------------------------------------!
%MDMAX==14 ;Maximum block number allocated
SUBTTL .MEFLG BIT DEFINITIONS
;The following flags may be
;present in the .MEFLG word of a tape-mount request:
;FLAG BIT MEANING
;---- --- -------
TM%SCR==1B0 ; Request to access temporary volume set.
; Implies TM%NEW, TM%NOV, TM%WEN
; TM%OSV is ignored if set
TM%NEW==1B1 ; Creating new volume set.
; Implies TM%NOV, TM%WEN
TM%VFY==1B2 ; Verify that user-supplied setname
; matches setname of volume(s) being mounted.
; Meaningful for labeled tapes only.
TM%OSV==1B3 ; Operator will be asked to key in list of
; volume identifiers.
TM%WEN==1B4 ; Volume(s) must be mounted write-enabled.
; If reset, must be mounted write-protected.
TM%BYP==1B5 ; If label-type is unlabeled, bypass any label
; security checks.
TM%NUL==1B6 ; Do not unload volumes at volume-switch or
; when DISMOUNT TAPE command given.
SUBTTL MOUNT REQUEST
; TAPE MOUNT REQUEST
; IPCF MESSAGE SENT FROM QUASAR TO MTCON
;!=======================================================!
;! MESSAGE LENGTH (512) ! MESSAGE TYPE (.QOMNT) !
;!-------------------------------------------------------!
;! FLAGS ! SIXBIT SUFFIX !
;!-------------------------------------------------------!
;! ACKNOWLEDGMENT CODE !
;!=======================================================!
;! !
;\ UNMODIFIED USER IPCF MESSAGE (MINUS HEADER) \
;! !
;!-------------------------------------------------------!
;! !
;\ 0 \
;! !
;!-------------------------------------------------------!
;! INTERNAL TASK NAME (ITN) !
;!-------------------------------------------------------!
;! USER'S PID !
;!-------------------------------------------------------!
;! SIZE OF USER'S MOUNT MESSAGE !
;!-------------------------------------------------------!
;! ACK CODE FROM USER'S MESSAGE HANDLER !
;!-------------------------------------------------------!
;! USER'S USER NUMBER !
;!-------------------------------------------------------!
;! USER'S ENABLED CAPABILITIES !
;!-------------------------------------------------------!
;! !
;\ USER'S ASCIZ ACCOUNT STRING \
;! !
;!=======================================================!
PHASE 762
.MMUMX:! ;MAXIMUM LENGTH OF USER MOUNT MESSAGE
.MMITN:! BLOCK 1 ;INTERNAL TASK NAME ASSIGNED BY QUASAR
.MMPID:! BLOCK 1 ;USER'S PID
.MMUMS:! BLOCK 1 ;SIZE OF USER'S MOUNT MESSAGE
.MMUCD:! BLOCK 1 ;ACK CODE FROM USER'S MESSAGE HEADER
.MMUNO:! BLOCK 1 ;USER'S USER NUMBER
.MMCAP:! BLOCK 1 ;USER'S ENABLED CAPABILITIES
.MMACT:! BLOCK 10 ;USER'S ASCIZ ACCOUNT STRING
DEPHASE
SUBTTL Response to User Tape Mount Request
;After the user process has sent an IPCF message to QUASAR to
;request a tape mount, it will typically wait for a response,
;which will be sent when:
; 1. QUASAR finds an error while parsing and validating the
; user request; the request is aborted.
; 2. MTCON encounters a problem trying to satisfy the
; request; the request is aborted.
; 3. MTCON mounts the first volume of the request
; successfully; the response indicates a successful
; mount.
;The mount response message sent by MTCON or QUASAR to the user
;will have the following format:
;!=======================================================!
;! MESSAGE LENGTH ! MESSAGE TYPE (.QOMNA) !
;!-------------------------------------------------------!
;! FLAGS ! SIXBIT SUFFIX !
;!-------------------------------------------------------!
;! ACKNOWLEDGMENT CODE FROM USER'S MOUNT REQUEST !
;!=======================================================!
;! FLAGS (NONE DEFINED) !
;!-------------------------------------------------------!
;! ENTRY COUNT !
;!-------------------------------------------------------!
;! ENTRY 1 !
;!-------------------------------------------------------!
;! . !
;! . !
;! . !
;!-------------------------------------------------------!
;! ENTRY n !
;!=======================================================!
;DEFINE THE MESSAGE TYPE
.QOMNA==1 ;TAPE MOUNT REQUEST ANSWER
;Either of two responses is conveyed:
; 1. The request was completed successfully. The response
; contains one .MNRDV and one .MNRTX.
; 2. The request was aborted. The response contains one
; .MNREC and possibly one .MNRTX.
SUBTTL MOUNT RESPONSES
;Mount response entry formats are described below:
.MNREC==2 ;Error Code
; !=======================================================!
; ! LENGTH (2) ! .MNREC !
; !-------------------------------------------------------!
; ! 0 ! TOPS-20 ERROR CODE !
; !=======================================================!
.MNRDV==1 ;Device block
; !=======================================================!
; ! LENGTH (2 OR 3) ! .MNRDV !
; !-------------------------------------------------------!
; ! VOLUME SET NAME OR STRUCTURE NAME !
; !-------------------------------------------------------!
; ! MT DEVICE DESIGNATOR (TAPE REQUESTS ONLY) !
; !=======================================================!
.MNRTX==3 ;Asciz Text
; !=======================================================!
; ! LENGTH ! .MNRTX !
; !-------------------------------------------------------!
; ! !
; \ ASCIZ TEXT \
; ! !
; !=======================================================!
.MNSDV==4 ;Sixbit Structure Alias
; !=======================================================!
; ! LENGTH ! .MNSDV !
; !-------------------------------------------------------!
; ! SIXBIT STRUCTURE NAME !
; !=======================================================!
.MNRNM==5 ;Sixbit Mount Request Name
; !=======================================================!
; ! LENGTH 1 .MNRNM !
; !-------------------------------------------------------!
; ! SIXBIT MOUNT REQUEST NAME !
; !=======================================================!
SUBTTL CANCELING TAPE MOUNT REQUESTS
;Response to User Cancel Request
;MTCON will send the following message to the user PID to convey
;the actions taken as a result of the cancel request:
;!=======================================================!
;! MESSAGE LENGTH ! MESSAGE TYPE (.QOMCA) !
;!-------------------------------------------------------!
;! FLAGS ! SIXBIT SUFFIX !
;!-------------------------------------------------------!
;! ACKNOWLEDGMENT CODE FROM USER'S MOUNT REQUEST !
;!=======================================================!
;! FLAGS (NONE DEFINED) !
;!-------------------------------------------------------!
;! ENTRY COUNT !
;!=======================================================!
PHASE MSHSIZ
.OFLAG:! BLOCK 1 ;FLAG WORD
.OARGC:! BLOCK 1 ;ENTRY COUNT
.OHDRS:! ;SIZE OF RESPONSE MESSAGE HEADER
DEPHASE
SUBTTL ABORT MSG FROM QUASAR TO MTCON
;THIS MESSAGE IS SENT BY QUASAR TO MTCON WHEN A USER
;CANCELS 1 OR MORE OF HIS MOUNT REQUESTS
;!===================================================== !
;! MESSAGE LENGTH ! MESSAGE TYPE (.QOMTA) !
;!------------------------------------------------------!
;! FLAGS ! SUFFIX !
;!------------------------------------------------------!
;! ACKNOWLEDGEMENT CODE !
;!------------------------------------------------------!
;! FLAG WORD (NONE) !
;!------------------------------------------------------!
;! ARGUMENT COUNT !
;!------------------------------------------------------!
;! ENTRY LENGTH ! ENTRY TYPE (.MTPID) !
;!------------------------------------------------------!
;! USERS PID !
;!------------------------------------------------------!
;! ENTRY LENGTH ! ENTRY TYPE (.MTITN) !
;!------------------------------------------------------!
;! ITN !
;!------------------------------------------------------!
;! ITN !
;!------------------------------------------------------!
; ETC
; THE MESSAGE BLOCK TYPES ARE:
.MTPID==1 ;USERS PID
.MTITN==2 ;A LIST OF ITN'S TO CANCEL
SUBTTL MOUNT RELEASE MESSAGE
;When a request completes, MTCON notifies the user (if
;appropriate) and sends a RELEASE message to QUASAR for that
;request.
; RELEASE MESSAGE FROM MTCON TO QUASAR
;!=======================================================!
;! MESSAGE LENGTH ! MESSAGE TYPE (.QOREL) !
;!-------------------------------------------------------!
;! FLAGS ! SIXBIT SUFFIX !
;!-------------------------------------------------------!
;! ACKNOWLEDGMENT CODE !
;!=======================================================!
;! INTERNAL TASK NAME OF REQUEST !
;!=======================================================!
;CHECKPOINT MESSAGE DEFINITIONS
;THESE DEFINE THE OFFSETS INTO THE CHE.IN BLOCK OF THE
;TAPE/DISK CHECKPOINT MESSAGE
.MTSTA==0 ;CHECKPOINT STATUS INFORMATION
.MTVOL==1 ;CHECKPOINT VOLUME INFORMATION
%VOLBL==0 ;NO VOLUME PRESENT
%VOLSC==1 ;SCRATCH VOLUME
;WORD MAY ALSO CONTAIN A SIXBIT VOLUME ID
.MTTYP==2 ;CHECKPOINT VOLUME TYPE
;SEE THE MOUNT REQUEST BLOCK CODES FOR TYPES
SUBTTL QUASAR TAPE MOUNT REQUEST QUEUE STRUCTURE
; !=======================================================!
; ! 36 BIT USER ID !
; !-------------------------------------------------------!
; / ASCIZ USER NAME /
; / /
; !-------------------------------------------------------!
; ! FLAGS ! USERS JOB NUMBER !
; !-------------------------------------------------------!
; ! SIXBIT REQUEST NAME !
; !-------------------------------------------------------!
; / /
; / USERS ASCIZ ACCOUNT STRING /
; / /
; !-------------------------------------------------------!
; ! USERS PID # !
; !-------------------------------------------------------!
; ! # OF VSL'S ! REQUEST ID !
; !-------------------------------------------------------!
; / /
; / POINTERS TO THE VOLUME /
; / SET LISTS /
; / /
; !-------------------------------------------------------!
PHASE 0
.MRUSR:! BLOCK 1 ;36 BIT USER ID OR PPN (-10)
.MRNAM:! BLOCK EQNMSZ ;USER NAME (ASCIZ -20, SIXBIT -10)
.MRJOB:! BLOCK 1 ;USERS JOB NUMBER,,CAPABILITIES (IPCF MDB.PV)
.MRREQ:! BLOCK 1 ;SIXBIT REQUEST NAME
.MRACT:! BLOCK 10 ;USERS ACCOUNT STRING
.MRPID:! BLOCK 1 ;REQUESTORS PID
.MRFLG:! BLOCK 1 ;FLAG BITS FOR THIS MDR
MR.WAT==1B0 ;SENDER IS WAITING FOR IPCF ACK WHEN DONE
MR.NOT==1B1 ;SENDER WANTS NOTIFICATION BY TRMOP.
.MRLOG:! BLOCK 1 ;UNIVERSAL TIME OF LOGIN
.MRRID:! BLOCK 1 ;VOL SET COUNT,,REQUEST ID
MR.RID==0,,-1 ;REQUEST-ID IN THE RIGHT HALF
MR.CNT==-1,,0 ;VOLUME SET COUNT IN THE LEFT HALF
.MRVSL:! BLOCK 1 ;POINTERS TO THE VOLUME SET LISTS (MINIMUM 1)
MDRLEN:! ;MINIMUM MDR QUEUE LENGTH
DEPHASE
SUBTTL VOLUME SET LIST (VSL) STRUCTURE
; !-------------------------------------------------------!
; ! POINTER TO MDR !
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
; ! # TRACKS ! DENSITY !
; !-------------------------------------------------------!
; ! VOLUME SET NAME !
; !-------------------------------------------------------!
; / /
; / USER'S ASCIZ REMARKS /
; / /
; !-------------------------------------------------------!
; ! VOLUME SET LOGICAL NAME !
; !-------------------------------------------------------!
; ! VOLUME COUNT ! VOLUME OFFSET !
; !-------------------------------------------------------!
; ! POINTERS TO VOLUME LIST !
; !-------------------------------------------------------!
PHASE 0
.VSMDR:! BLOCK 1 ;POINTER TO THE CONTROLLING MDR
.VSFLG:! BLOCK 1 ;MOUNT FLAG WORD
VS.TMP==1B1 ;THIS IS A TEMPORARY VOLUME SET
VS.NEW==1B2 ;THIS IS A NEW VOLUME SET
VS.VFY==1B3 ;WANT TO VERIFY VOLUME SET NAMES
VS.OPR==1B4 ;OPR WILL BE ASKED FOR VOLUME SET LIST
VS.WLK==1B5 ;0=WRITE ENABLED, 1=WRITE LOCKED
VS.NUL==1B6 ;DONT UNLOAD TAPE ON DISMOUNT/VOL SWITCH
VS.TYP==7B9 ;VOLUME TYPE 1=TAPE, 2=STRUCTURE, 3=DECTAPE
%TAPE==1 ;THIS IS A TAPE MOUNT REQUEST
%DISK==2 ;THIS IS A STRUCTURE MOUNT REQUEST
%DTAP==3 ;THIS IS A DECTAPE MOUNT REQUEST
%DSMT==4 ;THIS IS A DISMOUNT REQUEST
VS.LBT==17B13 ;VOLUME LABEL TYPE FOR LABEL PROCESSING
VS.VSW==1B14 ;Volume Switch in Progress
.VSATR:! BLOCK 1 ;MOUNT REQUEST ATTRIBUTES
VS.TRK==-1,,0 ;TRACKS
VS.DEN==0,,-1 ;DENSITY
.VSVSN:! BLOCK VSNLEN ;ASCIZ VOLUME SET NAME
.VSREM:! BLOCK ^D12 ;ASCIZ USER REMARKS (59 CHARS MAX)
.VSLNM:! BLOCK 1 ;VOLUME SET LOGICAL NAME (-10 ONLY)
.VSUCB:! BLOCK 1 ;POINTER TO LAST DEVICE ALLOCATED TO THIS VSL
.VSCVL:! BLOCK 1 ;VOL COUNT,,OFFSET TO THE CURRENT VOLUME
VS.OFF==0,,777000 ;OFFSET TO THE CURRENT VOLUME
VS.LVL==0,,000777 ;OFFSET TO LAST VOLUME USED
VS.CNT==-1,,0 ;VOLUME COUNT
.VSVOL:! BLOCK 1 ;POINTERS TO THE VOLUME LIST
VSLLEN:! ;MINIMUM LENGTH OF A VSL
DEPHASE
SUBTTL VOLUME LIST STRUCTURE (VOL)
; !-------------------------------------------------------!
; ! SIXBIT VOLUME NAME !
; !-------------------------------------------------------!
; ! VOLUME FLAG BITS !
; !-------------------------------------------------------!
; ! MOUNT COUNT ! OWNER OFFSET !
; !-------------------------------------------------------!
; ! POINTER TO THE UCB !
; !-------------------------------------------------------!
; / /
; / POINTER(S) TO THE VSL(S) /
; / /
; !-------------------------------------------------------!
PHASE 0
.VLNAM:! BLOCK 1 ;VOLUME NAME
.VLFLG:! BLOCK 1 ;VOLUME FLAG BITS
VL.STA==7B2 ;VOLUME STATUS
%STAWT==0 ;VOLUME IS WAITING
%STAAB==1 ;VOLUME USE HAS BEEN ABORTED
%STAMN==2 ;VOLUME IS MOUNTED
%STADM==3 ;VOLUME IS TO BE DISMOUNTED
VL.SCR==1B3 ;VOLUME IS A SCRATCH VOLUME
VL.SHR==1B4 ;VOLUME IS TO BE SHARED (DISK ONLY)
VL.DEN==7B7 ;VOLUME DENSITY
VL.LBT==17B11 ;VOLUME LABEL TYPE
.VLOWN:! BLOCK 1 ;COUNT OF REQUESTORS,,OFFSET TO OWNER
VL.OFF==0,,-1 ;OFFSET INTO .VLVSL FOR CURRENT OWNER
VL.CNT==-1,,0 ;NUMBER OF REQUESTORS FOR THIS VOLUME
.VLUCB:! BLOCK 1 ;POINTER TO THE UCB
.VLVSL:! BLOCK 1 ;POINTER(S) TO THE VSL(S)
VOLLEN:! ;MINIMUM VOLUME ENTRY LENGTH
DEPHASE
SUBTTL UNIT CONTROL BLOCK STRUCTURE
; !===============================================================!
; ! Device Name (Sixbit) !
; !---------------------------------------------------------------!
; ! Device Status Bits !
; !---------------------------------------------------------------!
; ! User Mount Count !
; !---------------------------------------------------------------!
; ! Volume Pointer !
; !===============================================================!
PHASE 0
.UCBNM:! BLOCK 1 ;DEVICE NAME IN SIXBIT
.UCBST:! BLOCK 1 ;DEVICE STATUS BITS
UC.TRK==1B1 ;TRACK STATUS 0=7TRK, 1=9TRK
UC.200==1B2 ;DEVICE SUPPORTS 200 BPI
UC.556==1B3 ;DEVICE SUPPORTS 556 BPI
UC.800==1B4 ;DEVICE SUPPORTS 800 BPI
UC.1600==1B5 ;DEVICE SUPPORTS 1600 BPI
UC.6250==1B6 ;DEVICE SUPPORTS 6250 BPI
UC.AVR==1B7 ;AVR BIT 1=ENABLED
UC.WLK==1B8 ;UNIT WRITE LOCKED 1=LOCKED
UC.OFL==1B9 ;UNIT IS OFFLINE 1=OFFLINE
UC.DVT==7B12 ;UNIT DEV TYPE (%TAPE, %DISK, %DTAPE)
UC.KTP==7B15 ;UNIT CONTROLLER TYPE
UC.AVA==1B16 ;UNIT IS AVAILABLE FOR USE BY MDA
UC.VSW==1B17 ;Ucb is in Volume Switch State
.UCBCN:! BLOCK 1 ;USER MOUNT COUNT
.UCBVL:! BLOCK 1 ;PTR TO VOLUME MOUNTED ON THIS DEVICE
.UCBVS:! BLOCK 1 ;POINTER TO THE VSL WHICH OWNS THIS UCB
UCBLEN:! ;A UCB LENGTH
DEPHASE
SUBTTL REQUEST FOR MOUNT ATTRIBUTES
;THIS IS A REQUEST TO QUASAR (ACTUALLY MTCON) FROM A USER TO RETURN
;ATTRIBUTES OF A MOUNTED DEVICE. THE MESSAGE SENT BY THE USER
;CONTAINS ONLY THE HEADER AND THE DEVICE DESIGNATOR. QUASAR
;ADDS THE PID AND CAPABILITIES WORDS AND PASSES THE MESSAGE TO
;MTCON, WHO THEN SENDS A REPLY TO THE USER'S PID.
;!=======================================================!
;! MESSAGE LENGTH ! MSG TYPE (.QOMAT) !
;!-------------------------------------------------------!
;! FLAGS !
;!-------------------------------------------------------!
;! USER'S ACKNOWLEDGMENT CODE !
;!=======================================================!
;! DEVICE DESIGNATOR !
;!-------------------------------------------------------!
;! USER'S PID !
;!-------------------------------------------------------!
;! USER CAPABILITIES ! USER JOB # !
;!=======================================================!
PHASE MSHSIZ
.MATDV:! BLOCK 1 ;DEVICE DESIGNATOR
.MATUS:! ;SIZE OF USER ATTRIBUTE REQUEST MESSAGE
.MATPD:! BLOCK 1 ;USER'S PID
.MATCP:! BLOCK 1 ;USER'S CAPABILITIES AND JOB NUMBER
.MATQS:! ;SIZE OF QUASAR-TO-MTCON MESSAGE
DEPHASE
SUBTTL RESPONSE TO REQUEST FOR MOUNT ATTRIBUTES
;!=======================================================!
;! MESSAGE LENGTH ! MESSAGE TYPE (.QOMAR) !
;!-------------------------------------------------------!
;! FLAGS !
;!-------------------------------------------------------!
;! USER'S ACKNOWLEDGMENT CODE !
;!=======================================================!
;! FLAGS (NONE DEFINED) !
;!-------------------------------------------------------!
;! ENTRY COUNT !
;!-------------------------------------------------------!
;! ENTRY 1 !
;!-------------------------------------------------------!
;! . !
;! . !
;! . !
;!-------------------------------------------------------!
;! ENTRY n !
;!=======================================================!
;DEFINE THE MESSAGE TYPE
.QOMAR==2 ;TAPE MOUNT ATTRIBUTES ANSWER
;EACH ENTRY CONSISTS OF A 1-WORD HEADER (LENGTH IN LEFT HALF, TYPE
;IN RIGHT HALF) FOLLOWED BY THE ENTRY-SPECIFIC INFORMATION. THE
;FOLLOWING ENTRIES ARE RETURNED FOR MAGTAPE DEVICES:
;.TMVOL LIST OF SIXBIT VOLIDS
;.TMSET SIXBIT SETNAME
;.MATDD DESIGNATOR OF MT DEVICE
.MATDD==100
SUBTTL The ARCHIVE Message - Function 41 (sent by IPCC)
TOPS20 <
PHASE 0
ARC.HD:!BLOCK 1 ; Header
ARC.FN:!BLOCK 1 ; Function and reason for message
AR.FNC==0,,-1 ; Function code
AR.MOD==-1,,0 ; Function modifier (reason)
ARC.PR:!BLOCK 1 ; Protection of file
AR.PRT==0,,-1 ; LH is unused
ARC.T1:!BLOCK 1 ; Tape ID #1
ARC.N1:!BLOCK 1 ; Further tape #1 info
AR.TSN==-1,,0 ; Tape saveset number
AR.TFN==0,,-1 ; Tape file number
ARC.T2:!BLOCK 1 ; Tape ID #2
ARC.N2:!BLOCK 1 ; Saveset and file nos. for tape #2
ARC.TT:!BLOCK 1 ; TAD file written to tape
ARC.AS:!BLOCK 10 ; Account string
ARC.FL:! ; File name begins here
ARC.SZ:! ; Minimum size of ARCHIVE msg
DEPHASE
> ;END TOPS20 CODE
END