Trailing-Edge
-
PDP-10 Archives
-
BB-H138B-BM
-
language-sources/ddt.mac
There are 55 other files named ddt.mac in the archive. Click here to see a list.
SUBTTL DDT /TW/PFC/TWE/DAL/DLM/EJW/JNG/RDH/DIB/DZN 6-Nov-79
COMMENT \
DDT -- "Dynamic Debugging Technique" for TOPS-10/TOPS-20
COPYRIGHT (C) 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979
BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
TRANSFERRED.
THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.
DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
\
; *** NOTE ***
;
;DDT.MAC is a common source file shared by the TOPS-10 and TOPS-20 groups.
;If either group changes it, they are responsible for coordinating their
;changes with the other group, so that the sources do not diverge and the
;latest version is always released on both systems.
;DDT VERSION IDENTIFICATION
MAJVER==41 ;MAJOR VERSION LEVEL
MINVER==0 ;MINOR (MAINTENANCE RELEASE) LEVEL
CSTVER==0 ;CUSTOMER VERSION (WHO LAST . . .)
EDTVER==265 ;EDIT LEVEL
%%DDT==:<BYTE (3)CSTVER(9)MAJVER(6)MINVER(18)EDTVER>
IF2 <PURGE MAJVER,MINVER,CSTVER,EDTVER>
; TABLE OF CONTENTS FOR DDT
;
;
; SECTION PAGE
; 1. REVISION HISTORY.......................................... 5
; 2. DDT ASSEMBLY SWITCHES..................................... 10
; 3. TITLE AND VERSION SETTING................................. 11
; 4. OPDEFS, MACROS, ETC....................................... 12
; 5. DDT SYMBOLS............................................... 16
; 6. GLOBAL SYMBOLS FOR USE BY THE OUTSIDE WORLD............... 17
; 7. MEMORY ALLOCATION PARAMETERS.............................. 18
; 8. MISCELLANEOUS DDT SYMBOLS................................. 20
; 9. FILDDT
; 9.1 COMMAND SCANNER................................... 25
; 9.2 SETUP PAGE BUFFERS AND SYMBOLS.................... 53
; 10. START DDT................................................. 59
; 11. DDT COMMAND PARSER........................................ 60
; 12. COMMAND DISPATCH TABLE.................................... 65
; 13. COMMAND ROUTINES
; 13.1 CLASS 1........................................... 66
; 13.2 CLASS 2........................................... 84
; 13.3 CLASS 3........................................... 85
; 13.4 CLASS 4........................................... 86
; 13.5 CLASS 5........................................... 87
; 13.6 CLASS 6........................................... 89
; 13.7 REGISTER DEPOSIT AND OPEN......................... 89
; 13.8 RETYPE LAST QUANTITY.............................. 97
; 13.9 TYPEOUT MODE CONTROL.............................. 98
; 13.10 LIMITS AND PATCHING............................... 100
; 13.11 MEMORY AND PAGING CONTROL......................... 105
; 13.12 BREAKPOINT FACILITY............................... 111
; 13.13 EXECUTE AND SINGLE STEP........................... 118
; 13.14 PUNCH PAPER TAPE.................................. 144
; 13.15 SEARCHING......................................... 148
; 13.16 COMMAND FILE INPUT................................ 150
; 13.17 MISCELLANEOUS COMMANDS............................ 153
; 14. FILE SPECIFICATION PARSING AND ERROR ROUTINES............. 159
; SECTION PAGE
; 15. ENTER AND LEAVE DDT
; 15.1 SAVE.............................................. 169
; 15.2 RESTOR............................................ 174
; 15.3 SWAP.............................................. 176
; 15.4 BCOM.............................................. 177
; 16. WORD TYPEOUT AND FORMATTING ROUTINES...................... 180
; 17. OUTPUT SUBROUTINES........................................ 187
; 18. SYMBOL TABLE ROUTINES
; 18.1 CHECK POINTERS.................................... 192
; 18.2 CONVERT SYMBOL TO VALUE........................... 194
; 18.3 CONVERT VALUE TO SYMBOL........................... 196
; 18.4 HARDWARE OPCODE PROCESSING........................ 199
; 18.5 FIND PROGRAM NAME................................. 209
; 18.6 REMOVE AN UNDEFINED SYMBOL........................ 210
; 18.7 SYMSET, USYSET, AND ADVSYM........................ 211
; 19. MEMORY MANAGEMENT ROUTINES
; 19.1 FETCH............................................. 218
; 19.2 DEPOSIT........................................... 226
; 19.3 ADDRESS MAPPING................................... 238
; 19.4 PHYSICAL MEMORY................................... 243
; 19.5 FILDDT I/O........................................ 246
; 19.6 SYMBOL TABLE ACCESS............................... 252
; 19.7 ADDRESS CHECKING.................................. 259
; 19.8 MISCELLANEOUS..................................... 270
; 20. PRESERVATION ROUTINES..................................... 286
; 21. TELETYPE IO LOGIC
; 21.1 DEFINITIONS....................................... 288
; 21.2 INPUT ROUTINES.................................... 291
; 21.3 LINE BUFFERING ROUTINES........................... 295
; 21.4 UTILITY ROUTINES.................................. 312
; 21.5 OUTPUT SUBROUTINES................................ 319
; 21.6 SAVE/RESTORE...................................... 324
; 22. STORAGE
; 22.1 LITERALS AND END OF CODE.......................... 336
; 22.2 ALLOCATION MACROS................................. 337
; 22.3 MISCELLANEOUS..................................... 339
; 22.4 $X LOGIC AND PATCH COMMAND........................ 341
; 22.5 BREAKPOINTS....................................... 342
; 22.6 SYMBOL TABLE LOGIC................................ 344
; 22.7 ADDRESSING DATA................................... 346
; 22.8 SAVE AREAS FOR PREVIOUS CONTEXT................... 347
; 22.9 STATE VARIABLES................................... 349
; 22.10 FILDDT............................................ 350
; 22.11 PUSH DOWN LIST.................................... 353
SUBTTL REVISION HISTORY
;THE REVISION HISTORY STARTS SUDDENLY AT EDIT 200
;
; DDT %37(200) RDH 14-NOV-76
;200 RDH 14-NOV-76 SPR 10-17714
; VALIDITY-CHECK THE SYMBOL POINTER FOR THE HIGH-SEG SYMBOL
; TABLE (.JBHSM) RATHER THAN ARBITRARILY BELIEVING IT (AND
; SUBSEQUENTLY ILL MEM REF'ING, ETC.).
;201 RDH 14-NOV-76 SPR 10-18806
; MORE OF EDIT 200, AT DEF1:
;202 RDH 14-NOV-76 SPR 10-19661
; TREAT THE MAP INSTRUCTION "E" FIELD AS AN IMMEDIATE QUANTITY
; RATHER THAN AS A MEMORY REFERENCE.
;203 RDH 14-NOV-76
; EXPAND FILDDT TO HANDLE FULL 22-BIT ADDRESSING IN EXE-FORMAT
; FILES (SPECIFICALLY CRASH.EXE).
;204 RDH 14-NOV-76 SPR 10-20165
; IMPLEMENT SPECIAL BYTE-FORMAT TYPEOUT FOR THE VARIOUS
; BYTE MANIPULATION INSTRUCTIONS. CODE COURTESY OF THE
; UNIVERSITY OF ARIZONA.
;205 RDH 15-NOV-76
; PUT TAG PTDFLG: UNDER FTYANK RATHER THAN FTEXEC!FTFILE FOR
; THOSE SITES THAT WISH TO TAKE THEIR CHANCES WITH $Y IN EITHER
; UDDT OR VMDDT (NOTE: $Y USES I/O CHANNEL 17 - BE WARNED)
;206 RDH 4-DEC-76
; REWRITTEN CODE IN CHKADR (TO BETTER HANDLE KL'S) FORGOT HOW
; KA'S WORKED AND LOST THE APR PI ASSIGNMENT.
;207 RDH 4-DEC-76
; IMPLEMENT "/D" FOR FILDDT -- TREAT FILE SPECIFIED AS PURE
; DATA FILE - DON'T CRUMP ON FIRST 20 LOCATIONS (THE "ACS"),
; DON'T LOOK FOR SYMBOL TABLE. IF NOT .EXE FORMAT AND NOT .XPN
; FORMAT THEN "/D" IS ASSUMED.
;210 RDH 6-DEC-76
; EXTEND THE $M COMMAND -- <M>$<N>M -- WHERE <N> IS THE
; MASK NUMBER AND <M> IS THE ASSOCIATED MASK.
;
; <N> = 0 OR NOT-SPECIFIED THEN <M> IS THE SEARCH MASK
; <N> = 1 THEN <M> IS TTY CONTROL MASK:
; 1B35 = 1 THEN "ECHO" <DEL>'S AS <BS><SP><BS>
;211 RDH 6-DEC-76
; NEW ASSEMBLY PARAMETER "SKPMAX" TO SET MAXIMUM NUMBER OF
; LOCATIONS SKIPPED FOR $X LOGIC. IF <INSTR>$X THEN TYPE
; <SKP> FOR EACH LOCATION SKIPPED. IF $$X THEN DO INDEFINITE
; $X UNTIL OLD-PC .LT. NEW-PC .LE. OLD-PC+SKPMAX
;212 RDH 7-DEC-76
;[214] MATCH ANGLE BRACKETTS -- <<
; WHEN PATCHING ($>) DON'T INSERT A 0 WORD UNLESS USER EXPLICITLY
; TYPED IT - I.E., ALLOW THE $> TO APPEAR BY ITSELF - THE WAY MOST
; PEOPLE TEND TO USE IT.
;213 RDH 9-DEC-76
; CHANGE SKIPN'S TO SKIPE'S IN [207] AND CAILE TO CAIL IN [210]
;214 RDH 18-DEC-76
; MATCH ANGLE BRACKETTS IN EDIT [212] COMMENTS TO KEEP VARIOUS
; AND SUNDRY PEOPLE HAPPY.
;215 RDH 19-DEC-76
; IF SPYSEG THEN NO HISEG SYMBOL TABLE.
;216 RDH 19-DEC-76
; CHKHSM ROUTINE ([200],[201]) IS TOO RESTRICTIVE, WON'T ALLOW
; .JBHSM TO POINT TO LOW SEG; CHKADR ROUTINE WON'T ALLOW RANDOM
; NON-CONTIGUOUS PAGES.
;217 RDH 19-DEC-76
; NAMSET ROUTINE (TO HANDLE MODULE$:) ASSUMES HIGH SEGMENT ALWAYS
; STARTS AT 400000, LEADING TO SUBSEQUENT ILL MEM REF'S.
;220 JNG 28-JAN-77
; PREVENT ILL MEM REF ON PATCH CLOSE WHEN USING A WRITE-LOCKED
; (E.G. HISEG) SYMBOL TABLE.
;DDT %40(220) MARCH, 1977
;221 TAH 13-MAR-77
; ADD COMMAND FRONT END TO INTERFACE FILDDT TO TOPS-20 SYSTEM.
; ADD KL PAGING CODE TO CVTADR, ALL UNDER FTFD20 CONDITIONAL
; (FTFILE MUST STILL BE ON ALSO).
;222 ASM 13-MAR-77
; IN EXEC DDT DETERMINE EXEC VIRTUAL ADDRESS OF EPT BY SCANNING
; EXEC VIRT ADR SPACE IF PAGING IS ON.
;223 TAH 13-MAR-77
; MAKE LPDL LARGER FOR TOPS-20 MDDT
;224 RDH 13-MAR-77
; MAKE SEARCHES HANDLE NON-CONTIGUOUS CORE/FILE IMAGES, ADD
; TWO NEW ASSEMBLY PARAMETERS:
;
; INDPTH ;MAX INDIRECT NESTING FOR $E SEARCHES
; LISCNT ;NUM OF <PUSHJ P,LISTEN>'S TWEEN INCHRS'S
;225 RDH 13-MAR-77
; HANDLE TYPEOUT RADIX .GE. 10 (E.G., HEX) MORE GRACEFULLY
;226 RDH 13-MAR-77
; EDIT 215 IS WRONG, .GTSGN == 14
;227 JNG 13-MAR-77
; ADD CODE TO DDT TO WRITE-ENABLE PAGES ON TOPS-20 BEFORE
; ATTEMPTING TO WRITE THEM - E.G., FOR BREAKPOINTS, PATCHS,
; AND SO FORTH. IF PAGE NOT WRITE-ENABLED, SET COPY-ON-WRITE
; SO AS NOT TO ZAP OTHER USERS "SHARING" THE PAGE.
;230 RDH 13-MAR-77
; WHEN IN A COMMAND FILE ($Y) THEN DO NOT CHECK THE COMMAND
; FILE FOR INPUT ON CALLS TO LISTEN - ONLY ACCEPT PHYSICAL
; TTY INPUT.
;231 RDH 14-MAR-77
; CLEAR $U POINTERS IN FILDDT ON ^Z, START SEQUENCE
;232 RDH 14-MAR-77
; UPDATE LH(.JBSA) ON PATCH END IF .JBFF WAS DEFAULTED TO
; ON PATCH BEGIN. THIS WAY THE PATCH IS AT LEAST SAVED ON
; SAVE'S, RESET'S, AD NAUSEUM.
;233 RDH 14-MAR-77
; REVAMP PATCH LOGIC ($< AND $>) TO DISPLAY LOCATION BEFORE
; MODIFYING SAME LOCATION SO THAT FILDDT CAN PATCH RUNNING
; MONITOR (ALSO LOOKS NEATER).
;234 RDH 23-MAR-77
; ADD NEW "MASK" COMMAND <N>$2M TO SET THE SYMBOL OFFSET RANGE
; (I.E. THE RANGE IN WHICH VALUES WILL BE TYPED IN THE FORM
; SYMBOL+<OFFSET>) TO <N>. ADD ASSEMBLY PARAMETER "ADRNGE"
; AS THE DEFAULT VALUE. ALSO MAKE $1M/ ETC. WORK.
;235 RDH 24-MAR-77
; REVAMP BYTE TYPEOUT LOGIC: ADD <N>$3M AS BYTE TYPEOUT MASK
; (EACH "1" BIT IN THE MASK MARKS THE END OF A BYTE, BIT 35
; IS ALWAYS CONSIDERED THE END OF A BYTE). FOR VALUES OF <N>
; SUCH THAT 1 .LE. <N> .LE. 36(10) THE COMMANDS $<N>O & $$<N>O
; WORK AS USUAL BY SETTING AN INTERNAL BYTE MASK. FOR <N> = 0
; THE $3M BYTE MASK WILL BE USED. FOR <N> = <NULL> (I.E. THE
; $O COMMAND) THE CURRENTLY PREVAILING $O OR $$O MASK WILL
; BE USED IF NON-BLANK, ELSE THE $3M MASK WILL BE USED.
; $$O MAKES PERMANENT THE CURRENTLY PREVAILING $O (OR $$O)
; BYTE MASK.
;236 RDH 14-APR-77
; ADD IFN FTYANK CONDITIONALS SO THAT FILDDT CAN BE ASSEMBLED
; WITH FTYANK TURNED OFF
;237 RDH 17-APR-77
; GENERAL CLEANUP AND REARRANGEMENT. MAKE TOPS-10 DDT SEARCH
; THE "C" UNIVERSAL FILE. TYPE OUT "DDT" WHEN USER MODE DDT
; IS ENTERED. PUT TOPS-10-SPECIFIC CODE UNDER "IFN FTDEC10"
; RATHER THAN "IFE FTDEC20".
;240 RDH 15-JUN-77
; ADD CODE TO TYPE OUT SYMBOLIC WORDS WITH USER-DEFINED SYMBOLS
; SUCH AS THE CALLI OR JSYS MNEMONICS. ORDER OF SEARCH IS:
; 1) OPCODE & AC & I & X & Y FIELDS
; 2) OPCODE & I & X & Y FIELDS (E.G. CALLI OR JSYS)
; 3) OPCODE & AC FIELDS (E.G. TTCALLS)
; 4) OPCODE ONLY
; 5) HARDWARE-KNOWN OPCODE (JRST, ETC.)
; PUT CODE UNDER FTOPX .NE. 0 CONDITIONAL SINCE UNTIL SORTED
; SYMBOL TABLES AVAILABLE THIS CODE TAKES MUCH RUN TIME.
; ALSO MAKE TRXX AND TLXX TYPE OUT ADDRESS AS OCTAL RATHER
; THAN SYMBOL+OFFSET.
;241 RDH 15-SEP-77 SPR # 10-22011
; "777777" COULD GET TYPED OUT AS "-1" WHEN $X'ING IF THE
; AC BEING TYPED OUT WAS TYPED OUT IN XWD FORMAT.
;242 RDH 16-SEP-77 SPR # 10-22616
; "AOS UND#(AC)" LOST BOTH THE UND SYMBOL AND THE AC IN
; THE WORD BEING BUILT (I.E., LEFT ONLY THE AOS).
;243 RDH 16-SEP-77 SPR # 10-22788
; PATCHING WITH FILDDT WRONG IF NONE OF THE USUAL PATCHING
; SYMBOLS (PAT.., PAT, PATCH) ARE PRESENT AND THUS PATCHING
; DEFAULTS TO C(.JBFF) - THE .JBFF USED WAS FILDDT'S, NOT
; THE FILE'S.
;244 RDH 16-SEP-77 SPR # 10-22894
; SOME RUBOUT'S STILL GET TYPED OUT.
;245 RDH 17-SEP-77 SPR # 10-23013
; AFTER REFERENCING AN UNDEFINED SYMBOL, THE UNDEFINED SYMBOL
; IS LEFT IN THE SYMBOL CACHE WITH ITS BOGUS VALUE (E.G., THE
; ADDRESS TO FIX UP).
;246 RDH 25-SEP-77
; BE MORE CHOOSEY ABOUT TYPE-IN INVOLVING UNDEFINEDS - CATCH ERRORS
; SUCH AS "PUSHJ UND#,FOO" OR "MOVE 4,(UND#)"
;247 RDH/JNG 16-OCT-77 TO 28-JUN-78
; MASSIVE DEVELOPMENT AND REVAMPING: EXTENDED ADDRESSING; JSYSIZE FILDDT;
; REMOVE SYMBOL CACHE; ADD $0W AND $1W; DISK SUPER I/O (FILDDT);
; PHYSICAL MEMORY ADDRESSING; KS-10 SUPPORT; KI/KL PAGING SUPPORT;
; $Z; $8T AND $9T; $.; $U ENHANCEMENTS; $B ENHANCEMENTS; $X EN-
; HANCEMENTS; DECOMMIT EXEC PAPER TAPE STUFF; SYMBOLIC TYPEOUT
; ENHANCEMENTS; $Y ENHANCEMENTS (TOPS-10 ONLY); NUMEROUS RANDOM
; BUG FIXES. CALL VERSION 41.
;250 JNG 15-AUG-78
; SEARCH UUOSYM, MACTEN INSTEAD OF C.
;DDT %40A(250) OCTOBER, 1978
;251 JNG/RDH 15-AUG-78 TO 26-JAN-79
; CONTINUING AND FIXING BUGS IN 247: IMPLEMENT HISEG SYMBOL TABLES
; IN FILDDT; ALLOW THE SYMBOL TABLE TO BE IN ANOTHER ADDRESS SPACE
; FOR EDDT AND MDDT; ADD $: WITH NO ARGUMENT; ADD "M" ERROR.
;252 JNG 4-FEB-79
; CHANGE HIDDEN SYMBOL LOGIC TO DO EXEC VIRTUAL BLT'S INSTEAD
; OF SWITCHING THE EPT BASE ADDRESS.
;253 DIB 8-MAR-79
; INSERT A NEW SYMBOL TABLE CACHE FOR OUTPUT ONLY. ALSO MOVE
; DATA PAGES BELOW CODE PAGES SO SYMBOL CACHE WILL FIT IN UDDT.
;254 JNG/RDH 8-MAR-79
; GET FAKEAC LOGIC RIGHT IN $U COMMANDS. BROKEN BY 251. ONLY
; SETUP .JBVER IF FILDDT. ADD /A (ABORT ON COMMAND ERROR) FOR
; $Y. MAKE ^W WORK MORE REASONABLY ON -10. MAKE FANCY RUBOUT
; HANDLING AUTOMATIC ON -10 (7.01 ONLY). ADD $$. AS PREVIOUS
; $. (USEFUL FOR $$.<$$X ETC.).
; (MATCH ANGLE BRACKETS:>)
;255 RDH 31-MAR-79
; LOST INSTRUCTION IN EDDT FOR KI-10'S. SUPPRESS ADDRESS BREAKS
; IN FETCH AND STORE LOGIC. IF $$X'ING (OR $W'ING (SEARCHING)
; OR $Z'ING (DEPOSITING)) AND USER TYPES A ? THEN GIVE A QUICKIE
; TYPEOUT STATUS. SECOND FIELD TEST FOR TOPS-10 7.00.
;256 RDH 17-APR-79
; RANDOM VERSION 41 BUGS (IN PARTICULAR $P OF A BREAKPOINT CAUSED
; BY XCT'ING A BREAKPOINT LOCATION FAILED). HANDLE ERCAL/JMP ON
; $P. HANDLE INIT UUO.
;257 JNG 21-APR-79
; CONVERT $U COMMAND TO FUNCTION CODES.
;260 RDH 13-MAY-79
; ADD ADR$V COMMAND TO "WATCH" A LOCATION AND REPORT ANY CHANGE IN
; ITS CONTENTS (ADR DEFAULTS TO LAST LOCATION OPENED).
;261 RDH 22-MAY-79
; STUPID LITTLE BUGS
;262 RDH 8-JUL-79
; XJRSTF AND FRIENDS WANT ALL 36 BITS OF PC FLAGS, NOT JUST THE
; LEFT-MOST 18 BITS. $I+3 IS 36-BIT PC FLAGS, $I+4 IS 36-BIT PC.
;263 RDH 16-JUL-79
; MORE STUPID LITTLE BUGGIES. IN PARTICULAR, N$P BROKE.
;264 DZN 25-OCT-79
; REPLACE SUB IN LOOKDN WITH EQUIVALENT CODE THAT DOESN'T OVERFLOW.
;265 DZN 6-NOV-79
; REMOVE MULTIPLY-DEFINED GLOBALS $nB, $I, $M WHEN KDDT AND MDDT ARE
; LOADED TOGETHER.
SUBTTL DDT ASSEMBLY SWITCHES
;SWITCHES FOR DDT FEATURES
;FTDEC10 ;TOPS-10 FACILITIES
;FTDEC20 ;TOPS-20 FACILITIES
;FTEXEC ;EXEC MODE FACILITIES (ALSO RUNS IN USER MODE)
;FTEX20 ;TOPS-20 MONITOR EDDT (LOADS ONLY WITH TOPS-20 MONITOR)
;FTPTP ;PAPER TAPE FACILITIES (EXEC MODE ONLY)
;FTFILE ;FILE DDT
;FTYANK ;PAPER TAPE INPUT FACILITIES ($Y)
;FTVMX ;BUILD DDT.VMX FOR TOPS-10 VIRTUAL MEMORY
;FTMON ;TOPS-20 MONITOR DDT
;FTOPX ;EXTENDED OPCODE DECODING FOR TYPEOUT
;FTDBUG ;DEBUGGING FACILITIES FOR DDT ITSELF (ESP EXEC MODE)
IFNDEF FTDEC10,<
IFNDEF FTDEC20,<
FTDEC10==-1
FTDEC20==0>>
IFNDEF FTDEC10,<FTDEC10==0>
IFNDEF FTDEC20,<FTDEC20==0>
IFNDEF FTFILE,<FTFILE==0>
IFNDEF FTYANK,<FTYANK==0>
IFNDEF FTEX20,<FTEX20==0>
IFNDEF FTEXEC,<
IFN FTEX20,<FTEXEC==-1>
IFE FTEX20,<FTEXEC==0>>
IFNDEF FTPTP,<FTPTP==0>
IFNDEF FTVMX,< FTVMX==0>
IFNDEF FTMON,< FTMON==0>
IFNDEF FTOPX,<FTOPX==-1>
IFNDEF FTDBUG,<FTDBUG==0>
;NORMALIZE ALL SWITCH VALUES TO 0 OR -1 SO BOOLEAN EXPRESSIONS IN
;CONDITIONALS WORK CORRECTLY.
DEFINE ..N (SW)<
IRP SW,<
IFN SW,<SW==-1>>>
..N <FTDEC10,FTDEC20,FTEXEC,FTEX20,FTPTP,FTFILE,FTYANK,FTVMX,FTMON>
..N <FTOPX,FTDBUG>
IFN FTDEC10&<FTDEC20!FTMON!FTEX20>,<PRINTX ? Illegal FTDEC10>
IFN FTDEC20&<FTDEC10!FTYANK!FTVMX>,<PRINTX ? Illegal FTDEC20>
IFN FTEXEC&<FTFILE!FTVMX!FTMON>,<PRINTX ? Illegal FTEXEC>
IFN ^-FTEXEC&<FTPTP!FTEX20>,<PRINTX ? Illegal ^-FTEXEC>
IFN FTFILE&<FTEXEC!FTPTP!FTVMX!FTMON!FTEX20>,<PRINTX ? Illegal FTFILE>
SUBTTL TITLE SETTING AND UNIVERSAL SEARCHING
SALL ;CLEAN LISTINGS
.DIREC FLBLST ;CLEANER LISTINGS
IFN FTDEC10,< ;TOPS-10 VERSIONS
SEARCH JOBDAT,MACTEN,UUOSYM ;ALL STANDARD TOPS-10 DEFINITIONS
IFE FTDBUG,<
IFN FTEXEC,<TITLE EDDT -- TOPS-10 EXEC MODE DDT>
IFN FTFILE,<TITLE FILDDT -- TOPS-10 FILE DDT>
IFN FTVMX,<TITLE VMDDT -- TOPS-10 VM DDT>
IFE FTFILE!FTEXEC!FTVMX,<TITLE UDDT -- TOPS-10 USER MODE DDT>
> ;END OF IFE FTDBUG
> ;END OF TOPS-10 TITLES
IFN FTDEC20,< ;TOPS-20 VERSIONS
SEARCH JOBDAT,MONSYM,MACSYM ;ALL STANDARD TOPS-20 DEFINITIONS
IFE FTDBUG,<
IFN FTEXEC&<^-FTEX20>,<TITLE EDDT -- TOPS-20 EXEC MODE DDT>
IFN FTEXEC&FTEX20,<TITLE KDDT -- TOPS-20 MONITOR KERNAL DDT>
IFN FTFILE,<TITLE FILDDT -- TOPS-20 FILE DDT>
IFN FTMON,<TITLE MDDT -- TOPS-20 MONITOR DDT>
IFE FTEXEC!FTFILE!FTMON,<TITLE UDDT -- TOPS-20 USER MODE DDT>
> ;END IFE FTDBUG
> ;END OF TOPS-20 TITLES
IFN FTDBUG,<TITLE DEBDDT -- DEBUGGING VERSION OF DDT>
IFN FTFILE,< ;ONLY FILDDTS SET UP VERSION NUMBER
LOC .JBVER ;WHERE THE TOPS-10 VERSION INFO GOES
%%DDT ;SET THE VERSION WORD
RELOC ;BACK TO NORMAL
> ;END IFN FTFILE
SUBTTL OPDEFS, MACROS, ETC.
;GENERAL
OPDEF SKPUSR [SKIPL USRFLG] ;SKIP IN USER MODE
OPDEF SKPEXC [SKIPGE USRFLG] ;SKIP IN EXEC MODE
OPDEF SKPKA [SKIPN KAFLG] ;SKIP FOR KA10
OPDEF SKPNKA [SKIPE KAFLG] ;SKIP NOT KA10
OPDEF SKPKI [SKIPN KIFLG] ;SKIP FOR KI10
OPDEF SKPNKI [SKIPE KIFLG] ;SKIP NOT KI10
OPDEF SKPKL [SKIPN KLFLG] ;SKIP FOR KL10
OPDEF SKPNKL [SKIPE KLFLG] ;SKIP NOT KL10
OPDEF SKPKS [SKIPN KSFLG] ;SKIP FOR KS10
OPDEF SKPNKS [SKIPE KSFLG] ;SKIP NOT KS10
OPDEF SKPKLS [SKIPN KLSFLG] ;SKIP FOR KL10 OR KS10
OPDEF SKPKIP [SKIPN KIPAG] ;SKIP FOR KI-PAGING
OPDEF SKPKLP [SKIPN KLPAG] ;SKIP FOR KL-PAGING
OPDEF SKPS0 [SKIPE SECDDT] ;SKIP IF IN ZERO SECTION
OPDEF SKPNS0 [SKIPN SECDDT] ;SKIP IF IN NON-ZERO SECTION
OPDEF APRID [700000,,000000];KL-10/KS-10 READ APR ID
OPDEF RDAPR [700240,,000000];KS-10 CONI APR,
OPDEF WRAPR [700200,,000000];KS-10 CONO APR,
OPDEF RDCSB [702040,,000000];KS-10 READ CST BASE
OPDEF RDSPB [702000,,000000];KS-10 READ SPT BASE
OPDEF RDTIMS [702200,,000000];KS-10 RDTIME
OPDEF WRTIMS [702600,,000000];KS-10 WRTIME
OPDEF XMOVEI [SETMI] ;MACRO HASN'T GOT IT YET
OPDEF IFIW [1B0] ; . . .
.NODDT IFIW ;DON'T WANT TO OVERRIDE SETZ
;.PHASE AND .DEPHASE MACRO DEFINITIONS
;NEEDED BECAUSE PHASE AND DEPHASE DON'T NEST
;USE THESE IN ALL CASES INSTEAD OF PHASE AND DEPHASE
..PLVL==0 ;INITIAL PHASE NESTING LEVEL
;MACRO TO REFERENCE THE LAST LOCATION AT PHASE LEVEL N
DEFINE ..PL(N)<..PL'N> ;SYMBOL DEFINED BY .PHASE
;SUBSTITUTE FOR PHASE STATEMENT
DEFINE .PHASE(N),<
..==10 ;;SAVE RADIX
RADIX 10 ;;MOST LEVELS PER CHAR
..PL(\..PLVL)==. ;;REMEMBER WHERE WE ARE
RADIX .. ;;RESTORE THE RADIX
IFE <..PLVL-^D99>,<PRINTX ? .PHASE NESTING OVERFLOW>
..PLVL==..PLVL+1 ;;BUMP NESTING LEVEL
PHASE N
> ;END OF .PHASE DEFINITION
;SUBSTITUTE FOR DEPHASE
DEFINE .DEPHASE,<
..PLVL==..PLVL-1
IFL ..PLVL,<PRINTX ? .PHASE NESTING UNDERFLOW>
IFG ..PLVL,<
..==10 ;;SAVE RADIX
RADIX 10 ;;USE RADIX WE WANT
PHASE .+..PL(\..PLVL) ;;BACK TO PREVIOUS PHASE LEVEL
RADIX .. ;;BACK TO OLD RADIX
>
IFE ..PLVL,<
DEPHASE ;;JUST DEPHASE AT OUTER LEVEL
>
> ;END OF .DEPHASE DEFINITION
;SYMBOLS NOT OTHERWISE DEFINED IN STANDARD UNIVSERALS
;TOPS-10 SPECIFIC
IFN FTDEC10,<
DEFINE TMSG(TEXT)<
OUTSTR [ASCIZ\TEXT\] ;;DEFINED IN MACSYM FOR TOPS-20
>
> ;END OF IFN FTDEC10
;TOPS-20 SPECIFIC
IFN FTDEC20,<
DEFINE ND(S,V),<IF2,<IFDEF S,<S==S>> IFNDEF S,<S==V>> ;NOT IN MACSYM
ND .CHCNH,.CHBSP ;THE -10 AND THE -20 USE DIFFERENT NAMES
IF2 <PURGE .CHBSP> ;DON'T CLUTTER UP THE SYM TABLE
OPDEF PJRST [JRST] ;NOT IN MACSYM
.NODDT PJRST ;NO TYPEOUT IN OPCODE FIELD
OPDEF MRPAC% [JSYS 772]
> ;END OF IFN FTDEC20
SUBTTL DDT SYMBOLS
;DEFINE ACCUMULATORS
F=0 ;FLAGS
P=1 ;PUSH DOWN
R=<A==2> ;POINTERS TO TABLES, CORE, ETC.
S=<B==3>
W=<C==4> ;CONTAINS DISPATCH ADDRESS IN WORD ASSEMBLER
T=5 ;TRANSFER DATA
W1=6
W2=7
SCH=10 ;MODE CONTROL SWITCH FOR OUTPUT
AR=11 ;MODE CONTROL SWITCH FOR OUTPUT
ODF=12 ;MODE CONTROL SWITCH FOR OUTPUT - CURRENT RADIX
TT=13 ;TEMPORARY
TT1=14 ;TEMPORARY
TT2=15 ;TEMPORARY (USED FOR PTR INPUT ONLY)
; AND FOR DTE COMMUNICATIONS
.XCREF F, P, R, S, W, A, B, C, T, W1, W2, TT, TT1, TT2 ;SAVE SOME PAPER
IFN FTDEC20,<
T1=1
T2=2
T3=3
T4=4
P=17 ;OVERRIDES P=1 ABOVE
.XCREF T1, T2, T3, P ;SAVE SOME MORE PAPER
> ;END OF IFN FTDEC20
;DEFINE PUSHDOWN LIST LENGTH
ND LPDL,^D100 ;100 WORDS IS ENOUGH FOR EVERYBODY
;DEFINE NUMBER OF DATA PAGES (MUST AGREE WITH MONITOR FOR MDDT)
ND NDDTPG,2 ;HERE TO AVOID MACRO BUG WITH FORWARD REF BELOW
SUBTTL GLOBAL SYMBOLS FOR USE BY THE OUTSIDE WORLD
IFE FTFILE,< ;FILDDT HAS NO GLOBAL SYMBOLS
IFE FTMON,< ;DON'T CONFLICT MDDT WITH EDDT
ENTRY DDT ;DEFINE THE MAIN DDT START ADDRESS
;USED ON "R DDT", "DDT$G", ETC.
IFN FTEXEC,<
ENTRY DDTX ;ENTRY POINT USED BY MONITORS
;ALSO ON TOPS-10 "DDT" MONITOR
;COMMAND TO CLEAR $Y IN PROGRESS
> ;END IFN FTEXEC
INTERN DDTEND ;END OF DDT, FOR USERS AND MONITOR
> ;END IFE FTMON
IFN FTDEC20,< ;TOPS-20 SPECIFIC DEFINITIONS
IFN FTEX20,< ;TOPS-20 EDDT DEFINITIONS
ENTRY $EDDT ;FORCES LOADING OF EDDT IN LIB SEARCH
$EDDT==0 ;DON'T CARE ABOUT THE DEFINITION
> ;END IFN FTEX20
IFN FTMON,< ;TOPS-20 MDDT DEFINITIONS
ENTRY $MDDT ;FORCES LOADING OF MDDT IN LIBRARY SEARCH
$MDDT==0 ;DON'T CARE
ENTRY MDDTX ;MDDT EQUIVALENT OF DDTX
MDDTX=DDTX
EXTERN DDTPGA ;MONITOR'S PLACE FOR MDDT'S VARIABLES
EXTERN .IMOPR ;INTERNAL MONITOR OPERATION SUBROUTINE
INTERN NDDTPG ;MUST AGREE WITH SPACE IN PSB
> ;END IFN FTMON
> ;END IFN FTDEC20
> ;END IFE FTFILE
SUBTTL MEMORY ALLOCATION PARAMETERS
;THE FOLLOWING PARAMETERS CONTROL WHERE DDT GETS LOADED.
;RUNLOC WHERE DDT'S CODE WILL GO AT RUNTIME. IF NEGATIVE,
; DDT'S CODE WILL START AT RELOCATABLE ZERO. THIS
; PARAMETER IS IGNORED IF FTMON OR FTEX20, SINCE THESE
; FLAVORS OF DDT GO IN SPECIFIC PSECTS OF THE TOPS-20
; MONITOR.
;
;VARLOC WHERE DDT'S VARIABLES WILL GO AT RUNTIME. IF
; NEGATIVE, DDT'S VARIABLES WILL IMMEDIATELY
; FOLLOW THE CODE. IGNORED IF FTMON OR FTEX20.
;THE FOLLOWING VARIABLES DESCRIBE/REMEMBER DDT'S MEMORY LAYOUT
;BEG.C THE FIRST LOCATION CONTAINING CODE
;END.C THE LAST LOCATION CONTAINING CODE + 1
;LEN.C THE LENGTH OF THE CODE (END.C-BEG.C)
;BEG.V THE FIRST LOCATION CONTAINING VARIABLE STORAGE
;END.V THE LAST LOCATION CONTAINING VARIABLE STORAGE + 1
;LEN.V THE LENGTH OF THE VARIABLE AREA (END.V-BEG.V)
;PHVAR THE LOCATION INSIDE THE CODE AREA WHERE A PURE
; COPY OF THE VARIABLE AREA STARTS (MDDT ONLY).
;DDTBEG THE LOWEST ADDRESS THAT IS PART OF DDT (FOR $$Z CODE)
;DDTEND THE HIGHEST ADDRESS (+1) THAT IS PART OF DDT
;DEFAULT RUNLOC AND VARLOC
IFN FTVMX,<
ND RUNLOC,700000 ;VMDDT DEFAULT ORIGIN
>
IFN FTDEC20&<^-FTEXEC>&<^-FTFILE>&<^-FTMON>,<
ND RUNLOC,770000 ;TOPS-20 USER DDT'S DEFAULT ORIGIN
>
IFN FTDEC20&<^-FTEXEC>&<^-FTFILE>&<^-FTMON>,<
ND VARLOC,RUNLOC-NDDTPG*1000 ;ORIGIN OF -20 UDDT'S VARS
>
ND RUNLOC,-1 ;DEFAULT TO RELOCATABLE IF NOT GIVEN
ND VARLOC,-1 ; . . .
;SETUP TO ALLOCATE DDT'S CODE AT THE RIGHT PLACE
IFN FTEX20,<
.PSECT INCOD ;-20 EDDT GOES IN INITIALIZATION CODE
> ;END IFN FTEX20
IFN FTMON,<
.PSECT NRCOD ;-20 MDDT GOES IN NON-RESIDENT CODE
> ;END IFN FTMON
IFE FTEX20!FTMON,<
IFGE RUNLOC,<
IFGE VARLOC,<
.PSECT DDTCOD/RONLY,RUNLOC ;READ-ONLY IF VARS GO ELSEWHERE
> ;END IFGE VARLOC
IFL VARLOC,<
.PSECT DDTALL/RWRITE,RUNLOC ;READ/WRITE IF WE GET VARS TOO
> ;END IFL VARLOC
> ;END IFGE RUNLOC
IFL RUNLOC,<
RELOC 0 ;START AT RELOCATABLE 0 IF NO RUNLOC
> ;END IFL RUNLOC
> ;END IFE FTEX20!FTMON
IFGE VARLOC,<IFGE RUNLOC,<IFL <VARLOC-RUNLOC>,<
;>>> DDTBEG:! ;PUT DDTBEG HERE UNLESS SURE VARS ARE LOWER
BEG.C:! ;START OF CODE
DDTOFS:! ;OFFSET FOR COMMAND DISPATCH
SUBTTL MISCELLANEOUS DDT SYMBOLS
;ASSEMBLY CONSTANTS
ND PAGSIZ,1000 ;"BLOCK" SIZE OF LOGICAL DISK/MEMORY ALLOCATION
PAGMSK==PAGSIZ-1 ;"AND" TO MASK TO ADDRESS WITHIN PAGE
PG2WRD==^D36-^L<PAGSIZ-1> ;"LSH" FOR PAGE TO WORD ADDRESS
WRD2PG==-PG2WRD ;"LSH" FOR WORD TO PAGE ADDRESS
ND BLKSIZ,200 ;"BLOCK" SIZE OF PHYSICAL DISK ALLOCATION
BLKMSK==BLKSIZ-1 ;"AND" TO MASK TO ADDRESS WITHIN BLOCK
BL2WRD==^D36-^L<BLKSIZ-1> ;"LSH" FOR BLOCK TO WORD ADDRESS
WRD2BL==-BL2WRD ;"LSH" FOR WORD TO BLOCK ADDRESS
PG2BLK==PG2WRD-BL2WRD ;"LSH" FOR PAGE TO BLOCK ADDRESS
BLK2PG==-PG2BLK ;"LSH" FOR BLOCK TO PAGE ADDRESS
ND NBP,^D12 ;NUMBER OF BREAKPOINTS
ND NSAVTB,^D17 ;NUMBER OF PC'S IN RING BUFFER ($<CR> ETC.)
ND SKPMAX,3 ;MAX NUMBER OF SKP'S IN $X LOGIC
ND INDPTH,100 ;MAX NESTING IN $E SEARCHES
ND ADRNGE,1000 ;ADDRESS RANGE FOR SYMBOL+VALUE TYPEOUT
IFN FTFILE,<ND SCSIZ,^D200> ;SIZE OF SYMBOL TABLE CACHE FOR FILDDT
IFE FTFILE,<ND SCSIZ,^D100> ; ALL OTHER DDTS
;ADDRESS (PAGE) ACCESS BIT DEFINITIONS
IFN FTDEC10,<
PG$EXI==PA.GNE ;PAGE EXISTS
PG$REA==PA.GRD ;PAGE CAN BE READ
PG$WRT==PA.GWR ;PAGE CAN BE WRITTEN
PG$HGH==PA.GHI ;PAGE IS PART OF HIGH SEGMENT
PG$SPY==PA.GSP ;PAGE IS ACTUALLY SPYING ON SOMEONE
PG$ABZ==1B17 ;PAGE IS ALLOCATED BUT ZERO
> ;END OF IFN FTDEC10
IFN FTDEC20,<
PG$EXI==PA%PEX ;PAGE EXISTS
PG$REA==PA%RD ;PAGE CAN BE READ
PG$WRT==PA%WT!PA%CPY ;PAGE CAN BE WRITTEN
PG$HGH==0 ;NONSENSE BIT
PG$SPY==0 ;NONSENSE BIT
PG$ABZ==1B17 ;PAGE IS ALLOCATED BUT ZERO
> ;END OF IFN FTDEC20
;PC BITS OF INTEREST
IFN FTDEC10,<
PC$AFI==PC.AFI ;ADDRESS FAILURE INHIBIT
> ;END IFN FTDEC10
IFN FTDEC20,<
PC$AFI==PC%AFI ;ADDRESS FAILURE INHIBIT
> ;END IFN FTDEC20
;TERMINAL CONTROL (IN TTYMSK, N$1M COMMAND)
;LEFT HALF BITS, PRESERVED AND SET ONLY BY USER
TT$SPC==1B17 ;3 SPACES OR TAB (0=SPACES, 1=TAB)
; (CONTROLS ONLY TTAB; TEXT OUTPUT OK)
;RIGHT HALF BITS, SET AUTOMATICALLY ON USER DDT ENTRY (NOT APPLICABLE
;TO TOPS-20), PRESERVED IN EXEC DDT (WHERE THEY MUST MANUALLY BE SET).
TT$TAB==1B34 ;TAB CAPABILITY
; (IF 1 THEN TERMINAL HANDLES TABS)
TT$DEL==1B35 ;FANCY DELETE HANDLING
; (IF 1 THEN <BS><SP><BS>)
;FOR MONITOR DDT ONLY
IFN FTMON,<
ND SYWLEN,1000 ;SIZE (EVEN PAGES) OF SYMBOL WINDOW
SYWMSK==SYWLEN-1 ;MASK FOR ABOVE
> ;END IFN FTMON
;FOR FILE DDT ONLY
IFN FTFILE,<
FIL==1 ;PRIMARY FILE I/O CHANNEL
ND WINMAX,^D20 ;PAGE "CACHE" SIZE - PAGES KEPT IN CORE
ND MEXSIZ,^D512*^D32 ;MAX PAGES IN REASONABLE .EXE FILE
;.EXE DIRECTORY INFORMATION
SV$HIS==SV%HIS ;PAGE IS PART OF HIGH SEGMENT
SV$MOD==1B17 ;PAGE HAS BEEN MODIFIED (WINDIR BIT)
SV$FPN==777,,777777 ;FILE PAGE NUMBER MASK
;************************************************************
;
; TEMP DEFS TIL UNIVERSALS HAVE THEM INCORPORATED
;
;************************************************************
IFN FTDEC10,< ;SOME TOPS-10 STUFF
> ;END OF TOPS-10 STUFF
IFN FTDEC20,< ;AND SOME TOPS-20 STUFF
.SVDIR==1776 ;EXE DIRECTORY HEADER TYPE
SV%HIS==1B0 ;EXE DIRECTORY - PAGE IS HISEG PAGE
> ;END OF FTDEC20 STUFF
> ;END OF IFN FTFILE
;*** FLAGS IN F ***
FEF== 1B0 ;"E" FLAG
COMF== 1B1 ;COMMA TYPED
TIF== 1B2 ;TRUNCATE TO 18 BITS - SET BY SPACE OR COMMA
DVF== 1B3 ;DIVIDE
FPF== 1B4 ;"." TYPED
CCF== 1B5 ;"$$" TYPED
STF== 1B6 ;SUPPRESS TYPEOUT
SAF== 1B7 ;RIGHT ANGLEBRACKET TYPED
FAF== 1B8 ;LEFT ANGLEBRACKET TYPED
SPF== 1B9 ;SPACE TYPED (USED BY CEFFAD)
MLF== 1B10 ;MULTIPLY
PTF== 1B11 ;ARITHMETIC OPERATOR TYPED
CF== 1B12 ;"$" TYPED
LTF== 1B13 ;LETTER TYPED IN CURRENT SYLLABLE
ROF== 1B14 ;REGISTER OPEN
SF== 1B15 ;SYLLABLE
MF== 1B16 ;MINUS SIGN TYPED
QF== 1B17 ;QUANTITY TYPED IN TO WORD ASSEMBLER
; 18-19 NOT USED
TXF==1B20 ;IN TEXT ([$]"/---/) COMMAND
USYMF==1B21 ;R POINTS TO THE UNDEFINED SYMBOL TABLE
MDLCLF==1B22 ;MULT DEF LOCAL SYMBOL (EVAL)
PNAMEF==1B23 ;PROGRAM NAME SEEN IN SYM TABLE SEARCH
POWF== 1B24 ;ARGUMENT FOR EXPONENT COMING
LF1== 1B25 ;OUTPUT ONE REGISTER IN FORCED MODE
OLF== 1B26 ;OUTSIDE LOCAL FLAG IN LOOK
CF1== 1B27 ;OUTPUT ONE REGISTER AS CONSTANT
NAF== 1B28 ;NEGATIVE ADDRESSES PERMISSABLE
FANYSF==1B29 ;EVAL OR LOOK HAS FOUND A SYMBOL
OPTRYF==1B30 ;WE'RE TRYING TO DECODE A SYMBOLIC OPCODE
HSYMF== 1B31 ;R POINTS TO HISEG SYMBOL TABLE
OKAF== 1B32 ;[240] OK AMBIGUOUS (LOOK ROUTINE)
OUTF== 1B33 ;OUTPUT
ITF== 1B34 ;INSTRUCTION TYPED
Q2F== 1B35 ;NUMBER TYPED AFTER $
;DEFINE SYMBOL TABLE SYMBOL TYPES
GLOBL== 04B5 ;GLOBAL SYMBOL
LOCL== 10B5
PNAME== 74B5 ;PROGRAM NAME
DELI== 20B5 ;DELETE INPUT
DELO== 40B5 ;DELETE OUTPUT
;DEFINE UNDEFINED SYMBOL TABLE (.JBUSY) TYPES
STADD== 1B0 ;IF 1, THEN ADDITIVE REQUEST
STLH== 1B1 ;IF 1, THEN REQUEST FOR LEFT HALF
STNEG== 1B4 ;IF 1, THEN NEGATIVE REQUEST
;RANDOM SYMBOL DEFINITIONS FOR TOPS-10
IFN FTDEC10,<
IFN FTEXEC!FTFILE,<
XZLOW==40
> ;END IFN FTEXEC!FTFILE
ZLOW==140
;THE FSBLK BITS
FS$SWT==1B0 ;SWITCH SPECIFIED
FS$DEV==1B2 ;DEVICE SPECIFIED
FS$NAM==1B3 ;FILENAME SPECIFIED
FS$EXT==1B4 ;EXTENSION (FILE TYPE) SPECIFIED
FS$PTH==1B5 ;DIRECTORY PATH SPECIFIED
FS$FIL==FS$DEV!FS$NAM!FS$EXT!FS$PTH ;FILE SPEC WAS SPECIFIED
;I/O CHANNELS
IFN FTYANK,<CM==17 ;I/O CHANNEL TO READ COMMAND FILES
ND YBFSIZ,203 ;SIZE OF [INTERNAL] BUFFER FOR COMMAND FILES
> ;END IFN FTYANK
INTERNAL .JBDDT
.JBDDT=74
IFE FTFILE!FTVMX,<
LOC .JBDDT
XWD DDTEND,DDTX
RELOC
>
> ;END OF IFN FTDEC10
;RANDOM SYMBOL DEFINITIONS FOR TOPS-20
IFN FTDEC20,<
ZLOW==20 ;START ZEROING ABOVE ACS
> ;END IFN FTDEC20
SUBTTL FILDDT -- COMMAND SCANNER
IFN FTFILE,<
;CODE COMMON TO ALL FLAVORS OF FILE DDTS
IFN FTDBUG,<DEBDDT:>
DDT: JFCL ;IN CASE OF CCL ENTRY
MOVE P,[IOWD LPDL,PDL] ;PRESET PUSH DOWN LIST
IFN FTYANK,<SETZM COMAND> ;[236] CLEAR $Y FLAG
SETZM MAPFN ;CLEAR $U POINTERS
SETOM EPTWRD ;CLEAR OTHER PAGING POINTERS
SETOM UPTWRD ; . . .
SETOM SPTWRD ; . . .
SETOM CSTWRD ; . . .
SETZM FAKEAC ;ASSUME TRUE 0 - 17
SETZM PATCHS ;PATCHING NOT LEGAL
SETOM LASTPG ;WE KNOW NOTHING ABOUT ANY PAGE
SETZM FWAZER ;CLEAR BLOCK OF STORAGE
MOVE T,[FWAZER,,FWAZER+1]
BLT T,LWAZER-1
SETOM FWAONE ;"CLEAR" BLOCK OF STORAGE
MOVE T,[FWAONE,,FWAONE+1] ;BLT POINTER TO
BLT T,LWAONE-1 ;INITIALIZE WINDOW POINTERS ET AL
PUSHJ P,CLRCSH ;ZERO OUT THE SYMBOL TABLE CACHE
;FALL INTO OPERATING-SYSTEM DEPENDENT STARTUP CODE
;STILL FTFILE
IFN FTDEC10,< ;TOPS-10 STYLE COMMAND SCANNING
;SCAN COMMAND LINE AND FIGURE OUT WHAT TO DO
;NOTE THAT WE FALL HERE FROM FILDDT STARTUP
FDIFS: RESET ;STOP THE WORLD
MOVX W1,.TODIS ;TERMINAL-IS-A-DISPLAY FUNCTION
SKIPN W2,TTDEV ;GOT AN $Y'ED TERMINAL?
SETO W2, ;NO, USE CONTROLLING TERMINAL
MOVE T,[2,,W1] ;TRMOP. ARG POINTER TO
TRMOP. T, ;READ DISPLAY SETTING
SETZ T, ;DUH?
DPB T,[POINTR TTYMSK,TT$DEL] ;SET <DEL> HANDLING
MOVEI T,1 ;USER MODE TAB SUPPORT
DPB T,[POINTR TTYMSK,TT$TAB] ;SET <TAB> LITERAL MODE
;NOW READ IN WHAT USER WANTS US TO DO
TMSG <File: > ;PROMPT USER FOR FILE SPEC
MOVEI S,FDISWT ;FILDDT SWITCH TABLE
PUSHJ P,FSCAN ;INPUT FILE SPEC ET ALL
JRST FDIERR ;ERROR, MESSAGE ALREADY ISSUED
SKIPN TT,FSBLK ;ANYTHING EXCITING HAPPEN?
JRST FDIFS ;NO, TRY AGAIN
SKIPE FDIFSW ;/F SPECIFIED?
TXNE TT,FS$FIL ;SEE A FILE SPEC (ANY PORTION THEREOF)?
CAIA ;YES, THEN OK
JRST FDEENF ;NO, NULL FILE SPEC ILLEGAL WITH /F
MOVE T,FDIDSW ;SEE IF /D
IOR T,PHYSIO ;OR /U
JUMPE T,FDIFS2 ;/D .OR. /U
SKIPE SYMGET ;.AND. /S ???
JRST FDEEDS ;YES, ILLEGAL COMBINATION
FDIFS2: SKIPE JOBING ;/J?
SETOM FDIMSW ;YES, PRETEND /M
MOVE T,FDIDSW ;/D?
IOR T,FDIFSW ;OR /F
IOR T,SYMGET ;OR /S
IOR T,PHYSIO ;OR /U
JUMPE T,FDIFS4 ;/D .OR. /F .OR. /S .OR. /U
SKIPE FDIMSW ;.AND. /M ???
JRST FDEERM ;YES, ILLEGAL COMBINATION
FDIFS4: SKIPN FDIMSW ;/M SPECIFIED?
JRST FDIDF ;NO, FILING OF SOME SORT
;FALL INTO MONITOR/MEMORY PEEKING INITIALIZATION
;STILL FTFILE & FTDEC10
;FALL HERE FROM PREVIOUS PAGE
;INITIALIZE FOR PEEKING AT RUNNING MONITOR/MEMORY
FDIDM: SETZM FILING ;NOTE NO FILE'ING IN PROGRESS
SETOM FAKEAC ;NEVER ANY MONITOR "ACS" FOR /M
SETZM AC0 ;IT IS NICER TO GIVE 0'S
MOVE T,[AC0,,AC0+1] ;BLT POINTER TO
BLT T,AC17 ;INITIALIZE MONITOR ACS
MOVX T,%NSMMS ;ASK FOR MEMORY SIZE
SKIPN JOBING ;/J?
GETTAB T, ;NO, MONITOR
MOVSI T,1 ;REASONABLE DEFAULT
MOVEM T,MAXSIZ ;SAVE FOR LATER CHECKING
SKIPN JOBING ;/J AGAIN?
JRST DD1 ;NO, GO START THINGS OFF
SETZ TT, ;INITIALIZE JOB NUMBER
MOVE TT2,FSFIL ;JOB NUMBER (IN SIXBIT)
FDIDJ: SETZ TT1, ;MAKE READY FOR
LSHC TT1,6 ;NEXT DIGIT
IMULI TT,^D10 ;JOB NUMBERS ARE DECIMAL
ADDI TT,-'0'(TT1) ;THIS DECADE
JUMPN TT2,FDIDJ ;LOOP
JUMPE TT,FDEERJ ;0 IS ILLEGAL JOB NUMBER
MOVX TT1,%CNSJN ;SEGMENT/JOB NUMBERS
GETTAB TT1, ;-SEGN,,JOBN
MOVEI TT1,^D511 ;DEFAULT JOBN
CAILE TT,(TT1) ;REASONABLE JOB NUMBER?
JRST FDEERJ ;NO, ERROR
MOVEM TT,JOBING ;YES, REMEMBER IT
JRST DD1 ;GO START UP NOW
;HERE FOR SOME TYPE OF (DISK) FILE I/O
FDIDF: SKIPN PHYSIO ;/U?
JRST FDIDF3 ;NO, REGULAR
;DEFAULTS FOR PHYSICAL UNIT I/O
SETOM FDIDSW ;YES, FORCE PURE DATA FORMAT
SKIPN FSDEV ;EXPLICIT STRUCTURE SUPPLIED?
JRST FDEERU ;NO, ERROR
JRST FDIDF6 ;CONTINUE WITH SETUP
;HERE FOR REGULAR FILE DEFAULTING
FDIDF3: MOVSI T,'DSK' ;DEFAULT INPUT DEVICE
SKIPN FSDEV ;USER GIVE A DEVICE?
MOVEM T,FSDEV ;NO, SUPPLY DEFAULT
SKIPN FSFIL ;HOW ABUT A FILENAME?
JRST FDENFI ;NULL FILENAME ILLEGAL
SKIPE FDIDSW ;/D?
JRST FDIDF6 ;YES, NO DEFAULT EXTENSION
MOVSI T,'EXE' ;DEFAULT EXTENSION
SKIPN FSEXT ;USER TYPE AN EXTENSION?
HLLOM T,FSEXT ;NO, USE DEFAULT
;STILL FTFILE & FTDEC10
;INITIALIZE FOR FILE I/O
FDIDF6: MOVEI T,[FLPLEN,,FLPBLK ;LEN,,ADR OF FILOP. BLOCK
LKPLEN,,LKPBLK ;LEN,,ADR OF LOOKUP BLOCK
PTHLEN,,PTHBLK] ;LEN,,ADR OF PATH BLOCK
PUSHJ P,FSFSET ;INITIALIZE FILOP. BLOCK
HALT DDT ;INTERNAL ERROR
MOVEI T,.FORED ;ASSUME WANT TO READ FILE
SKIPE PATCHS ;WANT TO WRITE AS WELL?
MOVEI T,.FOSAU ;YES, SINGLE ACCESS UPDATE THEN
SKIPE PHYSIO ;BUT WAIT - /U?
MOVEI T,.FOSIO ;YES, THEN REALLY WANT SUPER I/O
HRLI T,400000+FIL ;SLIP IN THE CHANNEL NUMBER
MOVEM T,FLPBLK+.FOFNC ;SETUP FUNCTION WORD
MOVEI T,.IODMP ;DUMP MODE I/O
MOVEM T,FLPBLK+.FOIOS ;SETUP I/O STATUS WORD
MOVE T,[FLPLEN,,FLPBLK] ;ADDRESS OF FILOP. BLOCK TO
FILOP. T, ;GET AN INPUT FILE
JRST FDIDF9 ;ERROR
MOVEI T,FIL ;INPUT FILE CHANNEL
DEVCHR T, ;ASK ABOUT WHAT WE GOT
TXNN T,DV.DSK ;IS IT A DISK?
JRST NOTDSK ;NO, ERROR
MOVE T,LKPBLK+.RBSIZ ;FILE SIZE, IN WORDS
MOVEM T,MAXSIZ ;SET MAX SIZE ALLOWABLE
JRST FDIOPN ;GO PROCESS
;HERE ON FILOP. ERROR
FDIDF9: SKIPE PHYSIO ;/U?
PUSHJ P,[CAIE T,ERILU% ;"ILLEGAL UUO" ?
POPJ P, ;NO, THEN REAL ERROR
OPEN FIL,FLPBLK+.FOIOS ;YES, DO IT THE OLD WAY
JRST [MOVEI T,ERILU% ;WHAT THE HEX
POPJ P,] ;RETURN WITH ERROR CODE
POP P,T ;ADJUST STACK
JRST FDIOPN] ;HANDLE OPEN FILE
JRST FDEFFF ;REAL FILOP. ERROR
;STILL FTFILE & FTDEC10
;FILDDT SWITCH TABLE
FDISWT: JRST FSEILS ;A - ILLEGAL
JRST FSEILS ;B - ILLEGAL
JRST FSEILS ;C - ILLEGAL
SETOM FDIDSW ;D - DATA FORMAT
JRST FSEILS ;E - ILLEGAL
SETOM FDIFSW ;F - FILDDT IT ANYWAY (WITH /S)
JRST FSEILS ;G - ILLEGAL
JRST FDIHLP ;H - HELP
JRST FSEILS ;I - ILLEGAL
SETOM JOBING ;J - LOOK AT A USER JOB
JRST FSEILS ;K - ILLEGAL
JRST FSEILS ;L - ILLEGAL
SETOM FDIMSW ;M - LOOK AT RUNNING MONITOR
JRST FSEILS ;N - ILLEGAL
JRST FSEILS ;O - ILLEGAL
SETOM PATCHS ;P - ENABLE PATCHING
JRST FSEILS ;Q - ILLEGAL
JRST FSEILS ;R - ILLEGAL
SETOM SYMGET ;S - EXTRACT SYMBOL TABLE
JRST FSEILS ;T - ILLEGAL
SETOM PHYSIO ;U - SUPER IO TO DISK UNITS
JRST FSEILS ;V - ILLEGAL
JRST FSEILS ;W - ILLEGAL
JRST FSEILS ;X - ILLEGAL
JRST FSEILS ;Y - ILLEGAL
JRST FSEILS ;Z - ILLEGAL
;STILL FTFILE & FTDEC10
FDIHLP: TMSG <
Type dev:file.ext[path]/switches
/D Treat file as pure binary data, not code
/F FILDDT this file anyway (used with /S)
/H Type this text
/M Examine running monitor
/P Patch monitor or file
type ^Z to exit from file patching
/S Load symbol table from file
/U Physical ("super") I/O to disk unit
If nothing typed then "/M" is defaulted
> ;GIVE A HELP MESSAGE
JRST DDT ;RESET AND SCAN AGAIN
;GENERAL FILE DDT COMMAND ERRORS
FDEEDS: TMSG <? /S illegal with /D or /U>
JRST FDEERR
FDEENF: TMSG <? Null file spec with /F>
JRST FDEERR
FDEERU: TMSG <? Explicit structure required with /U>
JRST FDEERR ;COMMON ERROR EXIT
FDEERM: TMSG <? /M illegal with /D, /F, /S, or /U>
JRST FDEERR
FDEERJ: TMSG <? Illegal job number>
JRST FDEERR
;FILE DDT ERROR MESSAGES DUPLICATED IN FSCAN
FDENFI: PUSHJ P,FSENFI ;COMPLAIN
JRST FDIERR ;GO CLRBFI
FDEFFF: PUSHJ P,FSEFFF ;COMPLAIN
JRST FDIERR ;CLRBFI AND RESTART DDT
> ;END OF IFN FTDEC10
;STILL FTFILE
IFN FTDEC20,< ;FILE SELECTION FOR TOPS-20
NCHPW==5 ;NUMBER OF ASCII CHARACTERS PER WORD
BUFSIZ==200 ;SIZE OF INPUT TEXT BUFFER
ATMSIZ==BUFSIZ ;SIZE OF ATOM BUFFER FOR COMND JSYS
GJFSIZ==.GJRTY+2 ;SIZE OF GTJFN BLOCK USED BY COMND JSYS
FDBSIZ==.CMDEF+2 ;SIZE OF FUNCTION DESCRIPTOR BLOCK
;STILL FTFILE & FTDEC20
;SCAN COMMAND LINE AND FIGURE OUT WHAT TO DO
;NOTE THAT WE FALL HERE FROM FILDDT STARTUP
CPARS: MOVEI T1,677777 ;MAXIMUM SIZE WE WANT TO USE
MOVEM T1,.JBREL ;SAVE FOR TESTS
HRROI T1,PROMPT ;GET POINTER TO PROMPT STRING
MOVEM T1,CMDBLK+.CMRTY ;SAVE IN STATE BLOCK
HRROI T1,BUFFER ;GET POINTER TO INPUT TEXT BUFFER
MOVEM T1,CMDBLK+.CMPTR ;SAVE POINTER TO COMMAND STRING
MOVEM T1,CMDBLK+.CMBFP ;SAVE POINTER TO START-OF-BUFFER
MOVE T1,[.PRIIN,,.PRIOU] ;GET PRIMARY INPUT,, OUTPUT JFN'S
MOVEM T1,CMDBLK+.CMIOJ ;SAVE PRIMARY JFN'S
SETZM CMDBLK+.CMINC ;INITIALIZE # OF CHARS AFTER POINTER
MOVEI T1,BUFSIZ*NCHPW ;GET # OF CHARS IN BUFFER AREA
MOVEM T1,CMDBLK+.CMCNT ;SAVE INITIAL # OF FREE CHAR POSITIONS
HRROI T1,ATMBFR ;GET POINTER TO ATOM BUFFER
MOVEM T1,CMDBLK+.CMABP ;SAVE POINTER TO LAST ATOM INPUT
MOVEI T1,ATMSIZ*NCHPW ;GET # OF CHARACTERS IN ATOM BUFFER
MOVEM T1,CMDBLK+.CMABC ;SAVE COUNT OF SPACE LEFT IN ATOM BUFFER
PARSE: HRROI T1,PROMPT ;GET POINTER TO PROGRAM'S PROMPT STRING
PUSHJ P,CMDINI ;OUTPUT THE PROMPT
PARSE1: MOVE P,[IOWD LPDL,PDL] ;SET UP STACK AGAIN
RESET ;CLEAR EVERYTHING
SETZM FCMZER ;ZERO VARIABLES IN CASE OF ERROR
MOVE T1,[FCMZER,,FCMZER+1] ; SINCE SOME ROUTINES SET VALUES
BLT T1,LWAZER-1 ; THEN DISCOVER ERRORS
MOVEI T1,GJFBLK ;GET ADDRESS OF GTJFN BLOCK
MOVEM T1,CMDBLK+.CMGJB ;STORE POINTER TO GTJFN BLOCK
MOVEI T1,CMDBLK ;GET POINTER TO COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMKEY,,CMDTAB)] ;GET FUNCTION BLOCK
COMND% ;DO INITIAL PARSE
TXNN T1,CM%NOP ;VALID COMMAND ENTERED ?
JRST PARSE5 ;YES, GO DISPATCH TO PROCESSING ROUTINE
HRROI T1,[ASCIZ\No such command as\]
PUSHJ P,TYPATM ;COMPLAIN
JRST PARSE ;GO TRY TO GET A COMMAND AGAIN
PARSE5: HRRZ T1,(T2) ;GET DISPATCH ADDRESS
PUSHJ P,(T1) ;PERFORM REQUESTED FUNCTION
JRST PARSE ;GO PARSE NEXT COMMAND
;STILL FTFILE & FTDEC20
; HELP COMMAND
.HELP: HRROI T2,[ASCIZ/WITH FILDDT/] ;GET NOISE WORDS
PUSHJ P,SKPNOI ;GO PARSE NOISE FIELD
POPJ P, ;FAILED, RETURN FAILURE
PUSHJ P,ENDCOM ;GO PARSE END OF COMMAND
POPJ P, ;BAD CONFIRMATION, RETURN
HRROI T1,HLPMSG ;GET POINTER TO HELP MESSAGE
PSOUT% ;OUTPUT HELP MESSAGE
POPJ P, ;GO PARSE NEXT COMMAND
; EXIT COMMAND
.EXIT: HRROI T2,[ASCIZ/TO MONITOR/] ;GET NOISE PHRASE
PUSHJ P,SKPNOI ;GO PARSE NOISE FIELD
POPJ P, ;FAILED, RETURN FAILURE
PUSHJ P,ENDCOM ;GO PARSE END OF COMMAND
POPJ P, ;BAD CONFIRMATION, RETURN
RESET% ;CLEAN UP
HALTF% ;BACK TO MONITOR
JRST DDT ;GO GET ANOTHER COMMAND
; PEEK COMMAND
.PEEK: HRROI T2,[ASCIZ /AT RUNNING MONITOR/]
PUSHJ P,SKPNOI ;TELL HIM
POPJ P,
PUSHJ P,ENDCOM ;GET CR
POPJ P, ;ERROR
SKIPN PATCHS ;DOES USER WANT TO PATCH THE MONITOR?
JRST PEEK2 ;NO
TMSG <% Patching the running monitor is illegal
> ;YES, WARN THE USER
SETZM PATCHS ;FOR SAFETY
PEEK2: SETZM FILING ;NO FILE
MOVX T1,.INFIN ;NO ARTIFICAL RESTRICTIONS ON ADDRESSES
MOVEM T1,MAXSIZ ;SINCE PEEK JSYS WILL TELL US
SETOM FAKEAC ;USE ARTIFICIAL ACS
SETZM AC0 ;IT'S BETTER TO GIVE HIM 0
MOVE T1,[AC0,,AC0+1] ;THAN OLD JUNK
BLT T1,AC0+17 ; . . .
JRST FDIGO ;GO TO IT
;STILL FTFILE & FTDEC20
.GET: HRROI T2,[ASCIZ 'FILE']
PUSHJ P,SKPNOI
POPJ P,
SKIPN FDIDSW ;DATA FILE?
JRST GET01 ;NO, GO DEFAULT TO .EXE
SETZM GJFBLK+.GJEXT ;DATA FILES HAVE NO FILE DEFAULTS
JRST GET02 ;OK, GO OPEN THE FILE
GET01: HRROI T1,[ASCIZ 'EXE'] ;DEFAULT EXTENSION
MOVEM T1,GJFBLK+.GJEXT ;STORE FOR COMND
GET02: SETZM SYMGET ;INDICATE GET, NOT LOAD
;LOAD COMMAND ENTERS HERE TO OPEN THE FILE, WITH SYMGET SET TO -1
GET03: MOVX T1,GJ%OLD
MOVEM T1,GJFBLK+.GJGEN
MOVEI T1,CMDBLK
MOVEI T2,[FLDDB. (.CMFIL)]
COMND%
TXNN T1,CM%NOP ;SPEC OK?
JRST GET10
PUSHJ P,TSTCOL ;SEE IF CRLF NEEDED
TMSG <? Invalid file specification, >
PJRST PUTERR ;OUTPUT ERROR STRING TO TERMINAL
GET10: HRRZM T2,FILJFN ;SAVE FILE JFN FOR LATER USE
SKIPE SYMGET ;LOAD OR GET COMMAND?
SKIPA T2,[CFMBLK] ;DON'T ALLOW SWITCHES ON LOAD
GET20: MOVEI T2,SWTBLK ;NOW ASK FOR SWITCHS OR EOL
COMND% ;ASK THE USER
TXNE T1,CM%NOP ;DID IT WORK?
JRST CFMERR ;NO, GO COMPLAIN
HRRZ T3,T3 ;ADDRESS OF BLOCK COMND FOUND
CAIN T3,CFMBLK ;EOL OR SWITCH?
JRST GET30 ;EOL, GO PROCESS
HRRZ T2,(T2) ;GET SWITCH PROCESSING ADDRESS
PUSHJ P,(T2) ;CALL PROCESSING ROUTINE
JRST GET20 ;LOOP FOR MORE SWITCHES
;STILL FTFILE & FTDEC20
;HERE WHEN THE LINE HAS BEEN SCANNED. CHECK SEMANTICS AND OPEN THE FILE.
GET30: HRROI T1,NAMBUF ;STORE FILE-SPEC
MOVE T2,FILJFN ;RETRIEVE JFN OF USER'S FILE
MOVEI T3,0
JFNS%
MOVE T1,FILJFN ;JFN OF FILE USER TYPED
DVCHR% ;FIND OUT ABOUT IT
HLRZ T1,T1 ;GET DEVICE TYPE CODE
CAIE T1,.DVDES+.DVDSK ;IS THIS A DISK DEVICE?
PJRST NOTDSK ;NO, COMPLAIN AND RETURN
MOVE T1,FILJFN ;SETUP JFN TO OPEN
SKIPN FDIFSW ;USE PATCHS IF GET /S
SKIPN SYMGET ;ALWAYS READ-ONLY IF LOADING SYMBOLS
SKIPN PATCHS ;WANT PATCHING?
SKIPA T2,[OF%RD] ;NO, SET UP TO READ
MOVX T2,OF%RD!OF%WR ;YES, SET UP TO WRITE
OPENF% ;OPEN USER'S FILE
ERJMP PUTERQ ;FAILED, COMPLAIN TO USER
MOVX T1,^D512*^D512*^D512 ;MAX LONG FILE SIZE ON TOPS-20
MOVEM T1,MAXSIZ ;GIVE ERROR BEYOND (MONITOR WRAPS AROUND)
JRST FDIOPN ;ALL OPEN
;SWITCH PROCESSING ROUTINES (SOME SAME AS ENABLE KEYWORD ROUTINES)
.SYMBL: SETOM SYMGET ;READ THE SYMBOLS FROM THIS FILE
SETOM FDIFSW ;BUT READ IT IN ANYWAY
POPJ P,
;STILL FTFILE & FTDEC20
.LOAD: HRROI T2,[ASCIZ 'SYMBOLS FROM']
PUSHJ P,SKPNOI
POPJ P,
HRROI T1,[ASCIZ 'EXE']
MOVEM T1,GJFBLK+.GJEXT ;DEFAULT EXTENSION IS EXE
SETOM SYMGET ;FLAG SYMBOL GET
JRST GET03 ;JOIN COMMON CODE
.ENBLE: MOVEI T1,CMDBLK
MOVEI T2,[FLDDB. (.CMKEY,,KEYTAB)]
COMND%
TXNN T1,CM%NOP
JRST ENAB10
HRROI T1,[ASCIZ \No keyword\]
PJRST TYPATM ;ILLEGAL KEYWORD, GO COMPLAIN
ENAB10: PUSH P,T2 ;SAVE INDEX
PUSHJ P,ENDCOM
JRST [POP P,T1
POPJ P,] ;ERROR RETURN
POP P,T2 ;RESTORE INDEX
HRRZ T1,(T2) ;GET DISPATCH
JRST (T1) ;GO DO IT
.PATCH: SETOM PATCHS ;SET PATCHING
POPJ P,
.DATA: SETOM FDIDSW ;SET DATA FILE
POPJ P,
;STILL FTFILE & FTDEC20
;PHYSICAL/SUPER I/O COMMANDS
.STRUC: HRROI T2,[ASCIZ 'FOR PHYSICAL I/O IS']
PUSHJ P,SKPNOI ;TELL USER WE WANT A STRUCTURE NAME
POPJ P,
MOVEI T2,[FLDDB. (.CMDEV)] ;GET A DEVICE
COMND%
TXNE T1,CM%NOP ;GET SOMETHING?
JRST PUTERQ ;NO, COMPLAIN
MOVEM T2,PHYSTR ;YES, STORE DESIGNATOR FOR DSKOP
PUSHJ P,ENDCOM ;CLOSE OFF COMMAND LINE
POPJ P, ;ERROR, GIVE UP
HLRZ T1,PHYSTR ;GET DEVICE TYPE
CAIE T1,.DVDES+.DVDSK ;A DISK?
PJRST NOTDSK ;NO, GO COMPLAIN
MOVX T1,FLD(.DOPSR,DOP%AT)!DOP%SN
MOVEM T1,PHYSIO ;SET ARB STRUCTURE DSKOP ARG
SETOM FDIDSW ;FORCE DATA-FILE (NOT EXE)
JRST FDIOPN ;GO SETUP TO DO PHYSICAL I/O
.DRIVE: HRROI T2,[ASCIZ 'FOR PHYSICAL I/O IS ON CHANNEL']
PUSHJ P,SKPNOI ;TELL USER WHAT WE WANT
POPJ P, ;ERROR
MOVEI T2,[FLDDB. (.CMNUM,,8)]
COMND% ;PARSE AN OCTAL NUMBER
TXNE T1,CM%NOP ;ERROR?
JRST PUTERQ ;YES, GO COMPLAIN
HRLZM T2,PHYSTR ;STORE CHANNEL TEMPORARILY
HRROI T2,[ASCIZ 'UNIT']
PUSHJ P,SKPNOI ;WE NOW WANT A UNIT
POPJ P, ;ERROR
MOVEI T2,[FLDDB. (.CMNUM,,8)]
COMND% ;PARSE AN OCTAL UNIT NUMBER
TXNE T1,CM%NOP ;ERROR?
JRST PUTERQ ;YES, COMPLAIN
HRRM T2,PHYSTR ;STORE UNIT TEMPORARILY
PUSHJ P,ENDCOM ;END LINE
POPJ P, ;ERROR
MOVX T1,FLD(.DOPPU,DOP%AT) ;DSKOP ARG FOR PHYSICAL DRIVE
HLRZ T2,PHYSTR ;RETRIEVE CHANNEL
DPB T2,[POINTR T1,DOP%CN] ;STORE
HRRZ T2,PHYSTR ;RETRIEVE UNIT
DPB T2,[POINTR T1,DOP%UN] ;STORE
MOVEM T1,PHYSIO ;STORE DSKOP ARG & FLAG PHYS I/O
SETOM FDIDSW ;REMEMBER NOT AN EXE FILE
JRST FDIOPN ;GO OPEN THINGS UP AND START DDT
;STILL FTFILE & FTDEC20
;COMMAND ERROR SUBROUTINES
; INVALID END-OF-COMMAND
CFMERR: PUSHJ P,TSTCOL ;TEST COLUMN POSITION
TMSG <? Garbage at end-of-command
> ;OUTPUT ERROR MESSAGE
POPJ P, ;RETURN TO WHENCE WE CAME ...
; ROUTINE TO OUTPUT THE JSYS MESSAGE ON AN ERROR FROM A GTJFN OR OPENF
;
; CALL: PUSHJ P,PUTERR ;PUTERQ TO PREFIX A "?"
; RETURNS: +1 ALWAYS
PUTERQ: PUSHJ P,TSTCOL ;PUT QM IN COLUMN 1
TMSG <? > ;PREFIX ERROR MESSAGE
PUTERR: MOVX T1,.PRIOU ;GET PRIMARY OUTPUT JFN
HRLOI T2,.FHSLF ;OUR FORK, LAST ERROR CODE
SETZM T3 ;
ERSTR% ;OUTPUT ERROR STRING
JFCL ;IGNORE
JFCL ;IGNORE
TMSG <
> ;OUTPUT NEW LINE
POPJ P, ;RETURN TO WHENCE WE CAME ...
; SUBROUTINE TO TEST COLUMN POSITION AND OUTPUT CRLF IF NEEDED
TSTCOL: MOVEI T1,.PRIOU ;GET PRIMARY OUTPUT DESIGNATOR
RFPOS% ;READ FILE POSITION
HRRZ T2,T2 ;KEEP JUST THE COLUMN POSITION
JUMPE T2,CPOPJ ;IF AT COLUMN 1 DO NOT OUTPUT CRLF
TMSG <
> ;NO, OUTPUT A CRLF
POPJ P, ;RETURN
;STILL FTFILE & FTDEC20
;PUTATM - ROUTINE TO TYPE THE CONTENTS OF THE ATOM BUFFER
;
;ACCEPTS IN T1/ POINTER TO ASCIZ PREFIX STRING TO BE TYPED
; PUSHJ P,TYPATM
;RETURNS: +1 ALWAYS
TYPATM: PUSH P,T1 ;SAVE POINTER
PUSHJ P,TSTCOL ;ISSUE NEW LINE IF NEEDED
TMSG <? > ;OUTPUT INITIAL PART OF MESSAGE
POP P,T1 ;RESTORE ATOM POINTER
PSOUT% ;OUTPUT THE STRING
TMSG < "> ;OUTPUT PUNCTUATION
HRROI T1,ATMBFR ;GET POINTER TO THE ATOM BUFFER
PSOUT% ;OUTPUT THE TEXT ENTERED
TMSG <"
> ;OUTPUT END OF LINE
POPJ P, ;RETURN
;STILL FTFILE & FTDEC20
;PARSING SUBROUTINES
; ROUTINE TO PARSE AN END-OF-COMMAND
;
; CALL: PUSHJ P,ENDCOM
; RETURNS: +1 BAD CONFIRMATION, MESSAGE ALREADY ISSUED
; +2 SUCCESS, COMMAND CONFIRMED
ENDCOM: MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMCFM)] ;GET FUNCTION BLOCK FOR CONFIM
COMND% ;PARSE CONFIRMATION
TXNE T1,CM%NOP ;VALID END-OF-COMMAND SEEN ?
PJRST CFMERR ;NO, ISSUE ERRO MESSAGE AND RETURN
JRST CPOPJ1 ;SUCCESS, RETURN
; ROUTINE TO PARSE NOISE PHRASE
;
; CALL: T2/ POINTER TO NOISE PHRASE
; PUSHJ P,SKPNOI
; RETURNS: +1 ERROR, INVALID NOISE PHRASE
; +2 SUCCESS, NOISE PHRASE PARSED OK
SKPNOI: MOVE T1,[NOIFDB,,NOIFDB+1] ;SET UP TO CLEAR FUNCTION DESCRIPTOR BLOCK
SETZM NOIFDB ;CLEAR FIRST WORD OF BLOCK
BLT T1,NOIFDB+FDBSIZ-1 ;CLEAR FUNCTION DESCRIPTOR BLOCK
MOVX T1,.CMNOI ;GET FUNCTION TO PERFORM
STOR T1,CM%FNC,NOIFDB ;STORE FUNCTION CODE IN FDB
MOVEM T2,NOIFDB+.CMDAT ;STORE POINTER TO NOISE PHRASE IN FDB
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,NOIFDB ;GET ADDRESS OF FUNCTION BLOCK
COMND% ;PARSE NOISE WORD
TXNN T1,CM%NOP ;NOISE PHRASE PARSED OK ?
JRST CPOPJ1 ;YES - RETUR SUCCESS
PUSHJ P,TSTCOL ;ISSUE NEW LINE IF NEEDED
HRROI T1,[ASCIZ/Invalid guide phrase/]
PJRST TYPATM ;OUTPUT THE TEXT ENTERED AND RETURN
;STILL FTFILE & FTDEC20
;CMDINI - ROUTINE TO INITIALIZE COMMAND STATE BLOCK AND OUTPUT PROMPT
;
;ACCEPTS IN T1/ POINTER TO ASCIZ PROMPT STRING
; PUSHJ P,CMDINI
;RETURNS: +1 ALWAYS, WITH THE REPARSE ADDRESS SET TO THE ADDRESS OF THE
; CALL TO CMDINI.
CMDINI: MOVEM T1,CMDBLK+.CMRTY ;SAVE PROMPT STRING IN STATE BLOCK
POP P,SAVRET ;SET UP RETURN ADR FROM CMDINI AND FROM REPARSE
MOVEM P,SAVREP ;SAVE STACK POINTER TO BE RESET ON REPARSE
MOVEI T1,REPARS ;GET ADDRESS OF REPARSE ROUTINE
MOVEM T1,CMDBLK+.CMFLG ;SAVE REPARSE ROUTINE IN STATE BLOCK
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMINI)] ;GET FUNCTION DESCRIPTOR BLOCK
COMND% ;INITIALIZE COMMAND SCANNER JSYS
JRST @SAVRET ;RETURN
; HERE TO PROCESS A REPARSE
REPARS: MOVE P,SAVREP ;RESET STACK POINTER
JRST @SAVRET ;RETURN TO CALLER OF CMDINI
;STILL FTFILE & FTDEC20
; CONSTANTS AND TABLES
DEFINE TB(RTN,TXT)
< [ASCIZ/TXT/] ,, RTN
>
CMDTAB: CMDSIZ,,CMDSIZ ;CURRENT,,MAX SIZE OF COMMAND TABLE
TB (.DRIVE,DRIVE) ;DRIVE (FOR PHYS I/O ON) CHAN UNIT
TB (.ENBLE,ENABLE) ;ENABLE (PATCHING/DATA-FILE)
TB (.EXIT,EXIT) ;EXIT TO MONITOR
TB (.GET,GET) ;GET (FILE) FILE-SPEC
TB (.HELP,HELP) ;OUTPUT HELP MESSAGE
TB (.LOAD,LOAD) ;LOAD (SYMBOLS FROM) FILE-SPEC
TB (.PEEK,PEEK) ;PEEK AT RUNNING MONITOR
TB (.STRUC,STRUCTURE) ;STRUCTURE (FOR PHYS I/O)
CMDSIZ== .-CMDTAB-1 ;DON'T COUNT 1ST WORD
KEYTAB: KEYSIZ,,KEYSIZ
TB (.DATA,DATA-FILE)
TB (.PATCH,PATCHING)
KEYSIZ== .-KEYTAB-1
SWTTAB: SWTSIZ,,SWTSIZ
TB (.DATA,DATA) ;FILE IS A DATA FILE
TB (.PATCH,PATCH) ;ENABLE PATCHING
TB (.SYMBL,SYMBOL) ;EXTRACT SYMBOLS
SWTSIZ== .-SWTTAB-1
SWTBLK: FLDDB. (.CMSWI,,SWTTAB,,,CFMBLK) ;BLOCK FOR SWITCHES OR EOL
CFMBLK: FLDDB. (.CMCFM)
;< (MATCH ANGLE BRACKETS)
PROMPT: ASCIZ /FILDDT>/ ;PROMPT STRING
;STILL FTFILE & FTDEC20
HLPMSG: ASCIZ \
GET (FILE) file-spec /switch/switch
Loads a file for DDT to examine it.
Switches:
/DATA Assume the file is raw binary.
/PATCH Allow the file to be modified.
/SYMBOL Load symbols from the file before using.
This is the default action for .EXE files
if DDT does not yet have a symbol table.
LOAD (SYMBOLS FROM) file-spec
Reads the specified file and builds an internal symbol table.
PEEK (AT RUNNING MONITOR)
Examines the running monitor. This command is currently
limited to section 0 due to PEEK JSYS restrictions.
STRUCTURE (FOR PHYSICAL I/O IS) disk-structure
Examines the specified disk structure.
DRIVE (FOR PHYSICAL I/O IS ON CHANNEL) c (UNIT) u
Examines the specified disk unit.
EXIT (FROM FILDDT)
Returns to command level. You then may type a SAVE command
if a LOAD command was just done to pre-load symbols.
HELP
Types this text.
ENABLE PATCHING
Allows modification of whatever is being examined.
ENABLE DATA-FILE
Assumes file is raw binary.
DDT features:
n$U sets the page number of the EPT or UPT to be used for
virtual addresses in examining the file.
n$$2U sets the SPT index of a section table or index block.
This is the same as n$U in previous versions of FILDDT.
$U un-does the above commands.
<CTRL/E> closes the currently open file and restarts FILDDT.
\
> ;END OF IFN FTDEC20
;STILL FTFILE
;HERE WHEN FILE SELECTED AND OPENED FOR I/O
FDIOPN: SETOM FILING ;REMEMBER NOT PEEKING
PUSHJ P,FDIAPB ;ALLOCATE BUFFERS FOR FILE'ING
JRST FDIERR ;ERROR--ASK FOR ANOTHER FILE
SKIPE PHYSIO ;SUPER I/O?
JRST FDIPHY ;YES, DIFFERENT FILE INITIALIZATION
SKIPE FDIDSW ;[207] "/D" TYPED
JRST FDIXPD ;[207] YEP - WE KNOW THE FORMAT
;VERIFY FILE IS .EXE FORMAT
MOVEI R,0 ;GET FIRST WORD OF FILE
PUSHJ P,FETCH ; . . .
JRST FDIXPN ;NOT AN EXE FILE IF NO FIRST WORD
HLRZ TT,T ;GET BLOCK TYPE CODE
CAIE TT,.SVDIR ;IS THIS AN EXE FILE?
JRST FDIXPN ;NO
HRRZ W1,T ;GET COUNT OF WORDS IN THIS BLOCK
TRZE W1,1 ;SUBTRACT HEADER WORD
CAILE W1,MEXSIZ*2 ;A REASONABLE EXE FILE?
JRST BADEXE ;WRONG FORMAT
LSH W1,-1 ;CONVERT WORDS TO ENTRIES
;FALL INTO NEXT PAGE
;STILL FTFILE
;NOW TO LOOP OVER THE EXE DIRECTORY TO DETERMINE THE
;LARGEST PROCESS PAGE DESCRIBED. WE WILL THEN USE THIS INFO
;TO ALLOCATE PAGTBL
SETO W, ;LARGEST IS -1 (NONE YET SEEN)
MOVE W2,W1 ;A COPY OF # OF ENTRIES FOR LOOPING
MOVEI R,2 ;START AT 2ND WORD OF 1ST ENTRY
FDIOP2: PUSHJ P,FETCH ;GET 2ND WORD OF NEXT EXE ENTRY
JRST BADEXE ;NOT AN EXE FILE?
LDB TT,[POINT 9,T,8] ;GET REPEAT COUNT
ANDX T,SV$FPN ;REDUCE TO FILE PAGE NUMBER
ADD TT,T ;PUT LARGEST PROC PAGE IN TT
CAMLE TT,W ;TT LARGEST YET SEEN?
MOVE W,TT ;YES, REMEMBER IT
ADDI R,2 ;NEXT ENTRY
SOJG W2,FDIOP2 ;LOOP OVER ENTIRE EXE DIRECTORY
;NOW ALLOCATE PAGTBL
JUMPL W,BADEXE ;PROBLEM IF NO ENTRIES SEEN
ADDI W,1 ;CONVERT TO # PAGES IN RANGE
CAILE W,MEXSIZ ;REASONABLE?
JRST BADEXE ;NO, DON'T TRY TO ALLOCATE IT
MOVEM W,PGTLEN ;YES, SAVE FOR CHKADR
MOVE T,.JBFF ;GET BASE OF NEW PAGTBL
ADDB W,.JBFF ;UPDATE .JBFF & GET END+1
CAMG W,.JBREL ;HAVE ENOUGH MEMORY?
JRST FDIOP4 ;YES, PROCEED
IFN FTDEC10,<CORE W,> ;NO, TRY TO GET MORE
JRST [TMSG <? Insufficient memory to read EXE file directory>
JRST FDEERR] ;CAN'T
FDIOP4: HRLI T,(IFIW (TT1)) ;MAKE T INTO AN IFIW TO PAGTBL
MOVEM T,PAGTBL ;SET POINTER FOR ALL TO SEE
SETZM (T) ;CLEAR PAGTBL IN CASE OF ^C START
HRL T,T ;PAGTBL,,PAGTBL
ADDI T,1 ;PAGTBL,,PAGTBL+1
MOVE TT1,PGTLEN ;LENGTH
SOSE TT1 ;LAST WORD: SAME AS FIRST?
BLT T,@PAGTBL ;NO, CLEAR REST OF TABLE
;FALL INTO NEXT PAGE
;STILL FTFILE
;FALL IN FROM ABOVE TO READ THE EXE DIRECTORY AND SETUP
;PAGTBL BASED ON THE EXE ENTRIES.
MOVEI R,1 ;START AT FIRST WORD OF FILE
FDIXL0: PUSHJ P,FETCH ;GET FIRST WORD OF NEXT DIRECTORY ENTRY
JRST BADEXE ;BAD FORMAT
MOVE W2,T ;SAVE IN A PERMANANT PLACE
ADDI R,1 ;POINT TO SECOND WORD OF ENTRY
PUSHJ P,FETCH ;GET IT
JRST BADEXE ;CAN'T
HRRZ TT1,T ;GET PROCESS PAGE NUMBER
CAIL TT1,MEXSIZ ;OUT OF RANGE
JRST BADEXE ;YES--FILE IS BAD
LDB TT,[POINT 9,T,8] ;GET COUNT
FDIXL1: TLNN W2,1777 ;JUNK IN LH
CAML TT1,PGTLEN ;IN TABLE?
JRST BADEXE ;BAD DIRECTORY
MOVEM W2,@PAGTBL ;STORE IN PAGTBL
TXNN W2,SV$HIS ;"HIGH SEGMENT" PAGE?
JRST FDIXL2 ;NO, SKIP
SKIPN JOBHSO ;THIS THE FIRST HISEG PAGE?
HRRZM T,JOBHSO ;YES, THEN START OF HISEG
FDIXL2: ADDI TT1,1 ;INCREMENT POINTERS
TRNE W2,3777 ;DO NOT CHANGE ALLOCATED BUT
; ZERO TO PAGE 1
ADDI W2,1 ; . . .
SOJGE TT,FDIXL1 ;LOOP OVER THIS ENTRY
ADDI R,1 ;STEP TO NEXT ENTRY
SOJG W1,FDIXL0 ;LOOP OVER ENTIRE DIRECTORY
MOVEI TT2,PAGSIZ ;PAGE SIZE
IMULM TT2,JOBHSO ;CALCULATE HISEG START ADDRESS (IF ANY)
SETOM EXEFMT ;FLAG TO USE EXE FORMAT MAPPING
SETOM LASTPG ;CHKADR'S DATA NOT VALID FOR EXE MAPPING
JRST FDISET
;FILE IS IN .XPN FORMAT OR IS PURE DATA FORMAT (E.G., FDIDSW .NE. 0)
FDIXPN: TMSG <% Not in .EXE format -- Data file assumed.
>
FDIXPD: SETZM EXEFMT ;FLAG NOT .EXE FILE
JRST FDISET ;GO DO FINAL SYMBOL ET AL SETUP
;STILL FTFILE
;HERE TO INITIALIZE FOR PHYSICAL I/O TO DISK UNITS
IFN FTDEC10,<
FDIPHY: MOVE T,FLPBLK+.FODEV ;GET INPUT DEVICE
MOVEM T,DSKBLK ;SAVE IT IN DSKCHR BLOCK
MOVE TT,[DSKLEN,,DSKBLK] ;DSKCHR POINTER
DSKCHR TT, ;ASK MONITOR ABOUT IT
JRST FDIPH1 ;NOT A DISK!
LDB T,[POINTR TT,DC.TYP] ;WHAT FLAVOR OF DISK
CAIE T,.DCTPU ;PHYSICAL UNIT (E.G., RPB3:)
CAIN T,.DCTUF ;OR LOGICAL UNIT (E.G., DSKC1:)?
JRST FDIPH2 ;YES, EASY CASE
CAIN T,.DCTFS ;NO, HOW ABOUT A FULL FILE STRUCTURE?
JRST FDIPH4 ;YES, REQUIRES SOME GRUNGE
FDIPH1: TMSG <? Device must be a disk unit or a file structure>
JRST FDEERR ;COMMON ERROR EXIT
;HERE ON A SPECIFIC UNIT
FDIPH2: MOVE TT2,DSKBLK+.DCUSZ ;UNIT SIZE IN BLOCKS
JRST FDIPH6 ;CRUNCH AND SET WORD COUNT
;HERE ON A FILE STRUCTURE
FDIPH4: MOVE S,DSKBLK+.DCSNM ;REMEMBER STRUCTURE NAME
SETZB TT1,TT2 ;INITIALIZE FOR SYSPHY SEARCH
FDIPH5: SYSPHY TT1, ;NEXT PHYSICAL UNIT IN SYSTEM
JRST FDIPH6 ;??? OH WELL, ASSUME ALL DONE
JUMPE TT1,FDIPH6 ;0 IS DONE
MOVEM TT1,DSKBLK ;SET FOR ANOTHER DSKCHR
MOVE TT,[DSKLEN,,DSKBLK] ;POINTER FOR DSKCHR
DSKCHR TT, ;QUERY MONITOR ABOUT THIS UNIT
HALT . ;CANNOT HAPPEN
CAMN S,DSKBLK+.DCSNM ;UNIT PART OF INTERESTING STRUCTURE?
ADD TT2,DSKBLK+.DCUSZ ;YES, ACCUMULATE BLOCKS COUNT
JRST FDIPH5 ;LOOP
FDIPH6: LSH TT2,BL2WRD ;MAKE WORD COUNT
MOVEM TT2,MAXSIZ ;SET MAX SIZE ADDRESSABLE
JRST FDISET ;GO SETUP FOR DISK I/O
> ;END OF IFN FTDEC10
;STILL FTFILE
;INITIALIZE FOR PHYSICAL I/O ON TOPS-20
;WE NEED TO CHECK TO MAKE SURE DRIVES ARE THERE, PACKS ARE
;SPINNING, CHECK WRITE-LOCK ETC., AND SETUP MAXSIZ.
IFN FTDEC20,<
FDIPHY: SKIPGE PHYSIO ;DOES USER WANT STRUCTURE OR UNIT?
JRST FDISTR ;STRUCTURE, GO PROCESS
LDB T,[POINTR PHYSIO,DOP%CN] ;UNIT, GET CHANNEL #
MOVEM T,MBLK+.MSRCH ;STORE FOR MSTR
SETOM MBLK+.MSRCT ;INIT CONTROLLER WORD
LDB T,[POINTR PHYSIO,DOP%UN] ;GET UNIT #
MOVEM T,MBLK+.MSRUN
HRROI T,STRBUF ;POINTER TO STRUCTURE NAME BUFFER
MOVEM T,MBLK+.MSRSN ;STORE IN BLOCK
HRROI T,ALIBUF ;POINTER TO ALIAS NAME BUFFER
MOVEM T,MBLK+.MSRSA ;STORE
MOVX T1,<MBLKL,,.MSRUS> ;ASK MSTR TO RETURN UNIT STATUS
MOVEI T2,MBLK ;USING MBLK
MSTR% ;FILL IN MBLK
ERJMP PUTERQ ;FAILED, COMPLAIN TO USER
MOVE T,MBLK+.MSRST ;GET STATUS FLAGS
TXNE T,MS%OFL ;IS UNIT OFF LINE?
PJRST OFLINE ;YES, COMPLAIN
TXNN T,MS%MNT ;IS IT PART OF A MOUNTED STRUCTURE?
JRST FDIPH2 ;NO, CONTINUE
TMSG <[Unit is part of structure > ;YES, TELL USER
HRROI T1,ALIBUF ;DOING THIS AVOIDS SAD ERRORS
PSOUT% ;TYPE STRUCTURE ALIAS
TMSG <:]
> ;CLOSE OFF MESSAGE
FDIPH2: PUSHJ P,CHKUNI ;TELL USER IF OTHER FUNNY STATUS BITS
MOVE T,MBLK+.MSRSU ;GET SECTORS PER UNIT
LSH T,BL2WRD ;CONVERT TO NUMBER OF WORDS
MOVEM T,MAXSIZ ;SET AS MAXIMUM SIZE TO EXAMINE
JRST FDISET ;GO START DDT
;STILL FTFILE & FTDEC20
;HERE IF USER SPECIFIED A STRUCTURE. LOOP OVER ALL UNITS IN THE
;SYSTEM TO COUNT THE TOTAL SPACE AVAILABLE ON THIS STRUCTURE.
FDISTR: HRROI T1,NAMBUF ;STORE STR NAME IN NAMBUF
MOVE T2,PHYSTR ;STRUCTURE DESIGNATOR COMND RETURNED
DEVST% ;GET NAME OF STRUCTURE
ERJMP PUTERQ ;COMPLAIN IF FAILURE
SETOM MBLK+.MSRCH ;INIT MBLK TO LOOP OVER ALL UNITS
SETOM MBLK+.MSRCT ; . . .
SETOM MBLK+.MSRUN ; . . .
SETZM MAXSIZ ;WE DON'T HAVE ANY SIZE YET
MOVX W2,.LHALF ;DON'T YET KNOW # UNITS IN STR
FDIST2: HRROI T,STRBUF ;POINTER TO STRUCTURE NAME BUFFER
MOVEM T,MBLK+.MSRSN ;STORE FOR MSTR
HRROI T,ALIBUF ;POINTER TO STRUCTURE ALIAS BUFFER
MOVEM T,MBLK+.MSRSA ;STORE
SETZM ALIBUF ;CLEAR TO AVOID SPURIOUS MATCHES
MOVX T1,<MBLKL,,.MSRNU> ;GET THE NEXT UNIT FUNCTION
MOVEI T2,MBLK ;USING MBLK
MSTR% ;GET INFO ON FIRST OR NEXT UNIT
ERJMP FDIST6 ;CHECK ALL DONE IF ERROR
HRROI T1,NAMBUF ;THE STRUCTURE THAT WE WANT
HRROI T2,ALIBUF ;THE ALIAS OF THIS UNIT
STCMP% ;SEE IF THEY ARE THE SAME
JUMPN T1,FDIST2 ;LOOP BACK FOR NEXT UNIT IF NOT
MOVE T,MBLK+.MSRST ;GET STATUS BITS
TXNE T,MS%OFL ;IS UNIT OFF LINE?
PJRST OFLINE ;YES, COMPLAIN AT USER
PUSHJ P,CHKUNI ;TELL USER ABOUT OTHER STATUS BITS
MOVE T,MBLK+.MSRSU ;GET SECTORS ON THIS UNIT
LSH T,BL2WRD ;CONVERT TO WORDS
ADDM T,MAXSIZ ;THE STRUCTURE IS THAT MUCH BIGGER
FDIST4: SOJGE W2,FDIST2 ;COUNT ANOTHER UNIT AND LOOK FOR MORE
AOJE W2,MISUNI ;TELL USER IF TOO MANY UNITS
HRRZ W2,MBLK+.MSRNS ;FIRST TIME THROUGH, GET NUMBER OF UNITS
JRST FDIST4 ;AND COUNT THE ONE WE JUST FOUND
FDIST6: MOVEI T1,.FHSLF ;WE GOT AN ERROR FROM MSTR. WHAT WAS IT?
GETER% ;ASK THE MONITOR
HRRZ T2,T2 ;ERROR CODE ONLY
CAIE T2,MSTX18 ;RAN OUT OF UNITS?
PJRST PUTERQ ;NO, GO TELL USER ABOUT OUR ERROR
JUMPN W2,MISUNI ;GO COMPLAIN IF DIDN'T FIND ALL UNITS
JRST FDISET ;ALL DONE
;STILL FTFILE & FTDEC20
;SUBROUTINES TO TALK ABOUT UNITS
CHKUNI: MOVE T,MBLK+.MSRST ;GET UNIT STATUS
TXNN T,MS%HBB ;BAD HOME BLOCKS?
JRST CHKUN2 ;NO, CHECK BAT BLOCKS
TMSG <% > ;YES, TYPE PREFIX
PUSHJ P,TYPUNI ;TYPE UNIT NAME
TMSG < has a bad HOME block
> ;TELL USER ABOUT STATUS BIT
MOVE T,MBLK+.MSRST ;RESTORE T FROM TYPUNI
CHKUN2: TXNN T,MS%BBB ;BAT BLOCKS BAD?
JRST CHKUN4 ;NO, PROCEED
TMSG <% > ;YES, ISSUE PREFIX
PUSHJ P,TYPUNI ;TYPE THE UNIT NAME
TMSG < has a bad BAT block
> ;TELL USER
MOVE T,MBLK+.MSRST ;RESTORE T
CHKUN4: TXNE T,MS%WLK ;WRITE LOCKED?
SKIPN PATCHS ;YES, BUT DOES THE USER WANT TO PATCH?
POPJ P, ;NO TO EITHER, DON'T CARE
TMSG <% > ;PREFIX
PUSHJ P,TYPUNI ;TYPE THE UNIT NAME
TMSG < is write locked
> ;TELL USER
POPJ P, ;RETURN
OFLINE: TMSG <? > ;OFF LINE UNIT IS FATAL
PUSHJ P,TYPUNI ;TELL UNIT
TMSG < is off line> ;TELL SAD STORY
JRST FDEERR ;ERROR RETURN
TYPSTR: SKIPL PHYSIO ;DRIVE OR STRUCTURE?
JRST TYPST2 ;DRIVE, TELL USER WHICH ONE
TMSG <file structure > ;STRUCTURE, TELL USER
HRROI T1,NAMBUF ;POINT TO STR NAME
PSOUT% ;TELL USER WHICH STR
TMSG <:> ;TERMINATE WITH COLON
POPJ P,
TYPST2: TMSG <unit > ;DRIVE, SAY "UNIT"
JRST TYPUN4 ;JOIN TYPUNI
TYPUNI: SKIPGE PHYSIO ;STRUCTURE OR UNIT?
JRST TYPUN2 ;STRUCTURE, NEED TO TELL WHICH UNIT
TMSG <Unit> ;UNIT, USER KNOWS WHICH ONE
POPJ P, ;RETURN
TYPUN2: TMSG <Unit > ;TELL USER UNIT NUMBER COMING UP
TYPUN4: MOVEI ODF,8 ;RADIX TO USE
MOVE T,MBLK+.MSRUN ;GET UNIT NUMBER
PUSHJ P,TOC ;TYPE UNIT NUMBER IN OCTAL
TMSG < on channel > ;TELL USER CHANNEL NUMBER COMING UP
MOVE T,MBLK+.MSRCH ;GET CHANNEL NUMBER
PJRST TOC ;TYPE IN OCTAL AND RETURN
MISUNI: JUMPL W2,MISUN1 ;BETTER MESSAGE IF NO UNITS FOUND
TMSG <? Missing or extra units in structure> ;COMPLAIN AT USER
JRST FDEERR ;TYPE CRLF AND RETURN
MISUN1: TMSG <? No such file structure> ;DIDN'T FIND IT AT ALL
JRST FDEERR ;TYPE CRLF AN RETURN
> ;END IFN FTDEC20
SUBTTL FILDDT -- SETUP PAGE BUFFERS AND SYMBOLS
;STILL FTFILE
;SETUP PAGE BUFFERS, SYMBOLS (IF APPROPRIATE) AND FETCH THE
;USER ACS (CRSHAC/BUGACS - IF ANY)
FDISET: SKIPN FILING ;LOOKING AT MONITOR/MEMORY?
JRST FDIGO ;YES, THEN NEVER EXTRACT SYMBOLS
SKIPE EXEFMT ;LOOKING AT A DATA FILE?
JRST FDIEXE ;NO, PROCEED WITH EXE FILE PROCESSING
;HERE ON A DATA FILE. SEE IF USER WANTS SYMBOLS EXTRACTED.
SKIPN SYMGET ;DATA FILE. USER WANT SYMBOL LOADED?
JRST FDIGO ;NO, GO FILDDT THE FILE.
SKIPE FDIFSW ;USER WANT TO LOOK AT THE FILE?
JRST FDISE2 ;YES, JUST WARN HIM
TMSG <? > ;EXTRACT SYMBOL ONLY, FATAL ERROR
JRST FDISE4 ;FINISH MESSAGE
FDISE2: TMSG <% > ;WARN COMMAND ONLY HALF DONE
FDISE4: TMSG <Symbols cannot be extracted from a data file
> ;FINISH WARNING OR ERROR
SKIPE FDIFSW ;WANT TO FILDDT THE FILE ANYWAY?
JRST FDIGO ;YES, GO TO IT.
PUSHJ P,CLSFIL ;NO, CLOSE OFF THE USELESS FILE
JRST DDT ;RESTART COMMAND PROCESSING
;HERE ON AN .EXE FILE
FDIEXE: SKIPE SYMGET ;/S SPECIFIED?
JRST FDISY ;YES, ALWAYS EXTRACT SYMBOLS
SKIPGE FISPTR ;NO /S. DO WE ALREADY HAVE SYMBOLS
JRST FDIAC ;YES, JUST LOOK FOR ACS THEN
;EXTRACT SYMBOLS FROM .EXE FILE
FDISY: PUSHJ P,SYMFIX ;READ IN THE SYMBOLS
JRST FDEERR ;BAD SYMBOL TABLE FORMAT, MSG ALREADY ISSUED
SKIPE FDIFSW ;FILDDT THE FILE (/F)?
JRST FDIAC ;YES, LOOK FOR ACS
SKIPN SYMGET ;JUST /S (NO /F)?
JRST FDIAC ;NO, GO FILDDT THE FILE
PUSHJ P,CLSFIL ;YES, CLOSE THE SYMBOL FILE
JRST DDT ;GO AROUND AND ASK FOR NEW FILE
;EXTRACT THE ACS FROM THE .EXE FILE
FDIAC:
IFN FTDEC10,<MOVE T,[RADIX50 0,CRSHAC]>
IFN FTDEC20,<MOVE T,[RADIX50 0,BUGACS]>
MOVEM T,SYM ;LOOKUP CRSHAC
PUSHJ P,EVAL ; IN SYMBOL TABLE
SETZ T, ;NOT THERE, USE VIRTUAL 0 TO 17
MOVSI W1,-20 ;NUMBER OF ACS
MOVE R,T ;WHERE THE ACS ARE
MOVEM R,FAKEAD ;SET ADDRESS FOR USER TO SEE
FDIGAC: PUSHJ P,FETCH ;GET THE AC
JRST FDIGO ;CAN NOT FETCH
MOVEM T,AC0(W1) ;STORE AC
ADDI R,1 ;POINT TO NEXT CELL
AOBJN W1,FDIGAC ;GET THE ACS
CAIN R,20 ;USING CRSHAC/BUGACS?
JRST FDIAC4 ;NO
IFN FTDEC10,<
TMSG <[ACs copied from CRSHAC to 0-17]
> > ;[221]
IFN FTDEC20,<
TMSG <[ACs copied from BUGACS to 0-17]
> > ;[221]
FDIAC4: SETOM FAKEAC ;[207] FLAG USING FAKE LOC 0 - 17
IFN FTDEC20,<
MOVE T,[RADIX50 0,SPT]
MOVEM T,SYM
PUSHJ P,EVAL
JRST FDIGO
MOVEM T,SPTWRD
> ;END OF IFN FTDEC20
;STILL FTFILE
FDIGO:
IFN FTDEC20,<
TMSG <[Looking at > ;HEADER OF MESSAGE
SKIPN PHYSIO ;PHYSICAL I/O?
JRST FDIGO2 ;NO
PUSHJ P,TYPSTR ;YES, TYPE WHAT WE'RE LOOKING AT
JRST FDIGO6 ;END THE LINE AND START DDT
FDIGO2: SKIPN FILING ;LOOKING AT A DISK FILE
JRST FDIGO4 ;NO
TMSG <file > ;YES, SAY IT'S A FILE
HRROI T1,NAMBUF ;POINT TO THE FILE SPEC
PSOUT% ;TYPE IT TOO
JRST FDIGO6 ;END LINE
FDIGO4: TMSG <the running monitor> ;ONLY POSSIBILITY LEFT
FDIGO6: TMSG <]
> ;END THE LINE
> ;END IFN FTDEC20
JRST DD1 ;GO START DDT
;SOME ERRORS COMMON TO ALL SYSTEMS
NOTDSK: TMSG <? Input device must be a disk>
JRST FDEERR ;CRLF AND RETURN
BADEXE: TMSG <? Bad format for .EXE file>
;HERE TO TYPE A CRLF, CLEAR THE INPUT BUFFER, AND SCAN A NEW COMMAND
FDEERR: TMSG <
> ;TYPE A CRLF
FDIERR: PUSHJ P,TTYCLR ;CLEAR INPUT BUFFER
IFN FTDEC10,<JRST DDT> ;RESTART DDT ON TOPS-10
IFN FTDEC20,<POPJ P,> ;GIVE ERROR RETURN TO PARSER ON TOPS-20
;STILL FTFILE
;ALLOCATE FILE PAGE BUFFERS
FDIAPB: SKIPE WIND0 ;ALREADY BEEN HERE?
JRST CPOPJ1 ;YES, GIVE GOOD RETURN
MOVE T,.JBFF ;START OF FREE MEMORY
TRNE T,PAGMSK ;PAGE BOUNDRY?
ADDI T,PAGSIZ ;NO, ROUND UP TO
ANDCMI T,PAGMSK ;PAGE BOUNDRY
MOVEM T,WIND0 ;SET AS BASE ADDRESS FOR BUFFERS
ADDI T,WINMAX*PAGSIZ-1 ;AMOUNT OF ROOM NEEDED
CAMG T,.JBREL ;WITHIN ADDRESSABLE MEMORY?
JRST FDIAP4 ;YES, NO NEED TO BOTHER MONITOR
PUSH P,T ;PRESERVE T ACROSS MONITOR CALL
IFN FTDEC10,<CORE T,> ;ASK MONITOR FOR SOME SPACE
JRST [TMSG <? Not enough memory for file pages>
POP P,T ;RESTORE STACK
POPJ P,] ;PROPOGATE FAILURE
POP P,T ;GET BACK ADDRESS
FDIAP4: ADDI T,1 ;POINT TO NEW FIRST FREE LOCATION
MOVEM T,.JBFF ;SAVE IT FOR OTHERS TO LOOK AT
JRST CPOPJ1 ;ALL DONE
;STILL FTFILE
SYMFIX: PUSHJ P,CLRCSH ;ZERO THE SYMBOL TABLE CACHE
MOVEI R,.JBSYM ;GET .JBSYM
PUSHJ P,FETCH ; . . .
SETZ T, ;NOT VALID, DON'T USE IT
MOVEM T,FISPTR ;SAVE IN FISPTR FOR A WHILE
MOVEM T,FOSPTR ;ALSO IN FOSPTR FOR CLSFIL
MOVEI R,.JBUSY ;GET .JBUSY
PUSHJ P,FETCH ; . . .
SETZ T, ;NOT VALID, DON'T USE IT
MOVEM T,FIUPTR ;SAVE IN FIUPTR FOR A WHILE
PUSHJ P,SYMCHK ;SET UP SAVHSM, CHECK OTHER PTRS
MOVE T,FIUPTR ;GET (POSSIBLY DIFFERENT) USY PTR
MOVEM T,FOUPTR ;SAVE FOR CLSFIL
MOVE T,SAVHSM ;ALSO SAVE SAVHSM
MOVEM T,OLDHSM ;CLSFIL NEEDS THEM ALL
MOVE W1,.JBFF ;GET CURRENT FIRST FREE
MOVEM W1,FISBEG ;SAVE FOR DEPSYM
ADDI W1,1000 ;1P FOR PATCHING
HLRE T,FISPTR ;GET .JBSYM SIZE
MOVN W,T ;COUNT CORE NEEDED
HLRE T,FIUPTR ;GET .JBUSY SIZE
SUB W,T ;BUMP AGAIN
HLRE T,SAVHSM ;GET .JBHSM SIZE
SUBB W,T ;BUMP A THIRD TIME
LSH T,-1 ;CONVERT TO NUMBER OF SYMBOLS
MOVEM T,FISCNT ;SAVE FOR MESSAGE
ADD W,W1 ;BEGINNING+COUNT=END
HRRZM W,.JBFF ;UPDATE MONITOR TO END FOR ITS BUFFER
HRLM W,.JBSA ; ALLOCATION MECHANISMS
HRLM W,.JBCOR ;INDICATE SYMBOLS FOR SAVE
SUBI W,1 ;CONVERT TO LAST LOC NEEDED
MOVEM W,FISEND ;SAVE FOR DEPSYM
CAMG W,.JBREL ;DO WE NEED MORE MEMORY?
JRST SYMFI4 ;NO, WE ALREADY HAVE PLENTY
IFN FTDEC10,<CORE W,> ;ALLOCATE SOME MEMORY
JRST [TMSG <? Not enough memory for symbols> ;COMPLAIN TO USER
POPJ P,] ;GIVE ERROR TO CALLER
;CONTINUED ON NEXT PAGE
;STILL FTFILE
;CONTINUED FROM PREVIOUS PAGE
;NOW TO COPY THE FILE'S SYMBOL TABLES INTO DDT'S ADDRESS SPACE.
SYMFI4: MOVE R,FIUPTR ;GET USY POINTER
HRRM W1,FIUPTR
JUMPGE R,SYMCPY ;SKIP IF NONE
UCOPY: PUSHJ P,FETCHL ;READ ANOTHER SYMBOL WORD
JRST BADSTF ;SYMBOL TABLE MESSED UP
MOVEM T,(W1)
AOS W1
AOBJN R,UCOPY
SYMCPY: MOVE R,FISPTR ;WHEREABOUTS OF MONITOR SYMBOLS
HRRM W1,FISPTR ;NOW POINT TO FILDDT SYMBOLS
JUMPGE R,HSYCPY ;IF NO TABLE, GO CHECK HI SEG
TCOPY: PUSHJ P,FETCHL ;GET A WORD
JRST BADSTF ;SYMBOL TABLE PTR IS WRONG
MOVEM T,0(W1) ;STASH IT
AOS W1
AOBJN R,TCOPY
HSYCPY: MOVE R,SAVHSM ;FILE'S HISEG SYMBOLS
HRRM W1,SAVHSM ;POINT SAVHSM TO FILDDT'S COPY
JUMPGE R,SYMFIN ;DONE IF NONE TO COPY
HCOPY: PUSHJ P,FETCHL ;GET NEXT WORD OF SYMBOL TABLE
JRST BADSTF ;ERROR
MOVEM T,(W1) ;STORE IN FILDDT'S AREA
AOS W1 ;BUMP FILDDT'S POINTER
AOBJN R,HCOPY ;LOOP THROUGH ALL SYMBOLS
SYMFIN: SETOM SYMGOT ;FLAG IN-CORE SYMBOLS ARE FROM THIS FILE
IFN FTDEC20,<
TMSG <[> ;START MESSAGE
MOVE A,FISCNT ;GET COUNT OF SYMS LOADED
PUSHJ P,FP7 ;TYPE IN DECIMAL
TMSG < symbols loaded from file]
>
> ;END IFN FTDEC20
JRST CPOPJ1 ;TELL CALLER WE DID IT
BADSTF: TMSG <? Incorrect symbol table pointer>
POPJ P, ;GIVE ERROR RETURN
> ;END FTFILE
SUBTTL START DDT
IFE FTFILE,<
IFN FTDBUG,<DEBDDT::>
DDTX:
DDT:
IFN FTYANK,<SETZM COMAND> ;INDICATE NO COMMAND FILE IF
;STARTING BY DDT COMMAND
IFN FTDEC20&<^-FTEXEC>&<^-FTMON>,< ;USER -20 DDT ONLY
JRST .+2 ;SKIP SYMTAB PTRS
SETA DDSYM ;NO-OP THAT LOOKS LIKE IFIW
SETA DDUSY ;SO JRST .+2 CAN FALL THROUGH HERE
> ;END USER -20 DDT
IFN FTMON,<
MOVEM T,SETRT1 ;SAVE AN AC
MOVE T,BPT$B+B$JSR
CAMN T,[JSR BCOM] ;VARIABLES AREA INITIALIZED?
JRST DDTIN1 ;YES
MOVE T,[PHVAR,,BEG.V] ;NO, DO IT
BLT T,VAREND-1
DDTIN1: MOVE T,SETRT1 ;RESTORE SCRATCH AC
> ;END IFN FTMON
JSR SAVE
PUSHJ P,REMOVB
IFE FTVMX,<MOVE W1,[ASCII /DDT/]> ;IDENTIFY USER MODE DDT
IFN FTVMX,<MOVE W1,[ASCII /VMDDT/]> ;IDENTIFY TOPS-10 VM DDT
IFN FTMON,<MOVE W1,[ASCII /MDDT/]> ;IDENTIFY TOPS-20 MDDT
IFN FTEXEC&<^-FTMON>,<
SKPUSR ;IF EXEC MODE, THEN
MOVE W1,[ASCII /EDDT/] ;IDENTIFY EXEC MODE DDT
> ;END OF IFN FTEXEC
PUSHJ P,TEXT2 ;TYPE MESSAGE SAYING WHICH DDT
IFN FTDBUG,<
MOVEI W1,[ASCIZ/ (debugging)/]
PUSHJ P,TSTRG ;DIFFERENTIATE FROM REGULAR DDT(S)
> ;END IFN FTDBUG
> ;END IFE FTFILE
SUBTTL DDT COMMAND PARSER
DD1: PUSHJ P,TCRLF
DD1.5: TXZ F,ROF ;CLOSE ANY OPEN REGISTER
MOVE T,[XWD SCHM,SCH]
BLT T,ODF ;LOAD ACS
MOVE T,[PSVBTS,,SVBTS]
BLT T,SVBTS+1
DD2: MOVE T,[SCH,,SCHR] ;SAVE CURRENT TYPEOUT MODES
BLT T,ODFR ;IN CASE REPARSE NEEDED
SETZM PRNC ;PARENTHESES COUNT
MOVE P,[IOWD LPDL,PDL]
SETZM WAKALL ;SET WAKEUP SET TO PUNCT AND CTRLS
XMOVEI T,RET ;INIT TOP OF STACK TO RET
MOVEM T,XPDL ;SO COMMAND ROUTINES CAN POPJ
MOVE T,@USYMP ;GET ORIGINAL UNDEFINED SYMBOL PTR
MOVEM T,ESTUT ;INIT UNDEFINED SYM ASSEMBLER
LIS0C: TXZ F,<^-<ROF!STF>&<-1,,0>>!LF1!CF1!OKAF!ITF!Q2F
LIS0E: TXZ F,<^-<ROF!STF!FAF!SAF>&<-1,,0>>!NAF
SETZM WRD
LIS1: SETZM FRASE
LIS2: MOVEI T,1
MOVEM T,FRASE1
TXZ F,MLF!DVF
L1: TXZ F,CF!CCF!SF!FPF!Q2F!LTF!TXF ;TURN OFF CONTROL, SYL, PERIOD FLAG
L1A: SETZM SYL
L1RPR: SETZM SYM
MOVEI T,6
MOVEM T,TEM ;INIT SYMBOL COUNTER
MOVE T,[POINT 7,OPTXT]
MOVEM T,CHP ;SETUP FOR OPEVAL SYMBOL
SETZM DEN
SETZM WRD2D
SETZM WRD2O
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
L2: PUSHJ P,TIN ;PICK UP CHARACTER
CAIL T,"A"+40 ;LOWER CASE A
CAILE T,"Z"+40 ;LOWER CASE Z
JRST .+2
TRC T,40 ;CHANGE LOWER CASE TO UPPER CASE
TXNE F,CF ;CONTROL FLAG
JRST L21
CAIG T,"Z" ;Z
CAIGE T,"A" ;A
JRST .+2
JRST LET
L21: MOVE R,T
CAILE T,137 ;DISPATCH TABLE HAS ENTRIES ONLY .LE. 137
JRST ERR
IDIVI R,3 ;REMAINDER GIVES COLUMN, QUOTIENT GIVES ROW
LDB W,BDISP(R+1) ;GET 12 BIT ADDRESS FROM DISPATCH TABLE
CAIGE W,MULT-DDTOFS ;FIRST EVAL ROUTINE
JRST DDTOFS(W)
MOVE T,SYL
TXNN F,LTF
JRST POWER
;TIME TO EVALUATE A SYMBOL. IF THIS IS IN THE OPCODE FIELD (1ST THING
;TYPED AND TERMINATED WITH A SPACE), THEN SEARCH ORDER IS:
;1. OPDEFS FROM THE S.T. (B0-8 .NE. 0) 2. BUILT-IN OPCODES 3. REST OF S.T.
;IF THE SYMBOL TYPED IS NOT IN THE OPCODE FIELD, THEN THE ORDER IS:
;1. ANY MATCH IN THE S.T. 2. DDT'S BUILT-IN OPCODES.
;THE FLAG OPTRYF INDICATES THAT WE ARE TRYING TO SEARCH FOR AN OPCODE.
TXO F,OPTRYF ;ASSUME WE ARE IN THE OPCODE FIELD
CAIN W,SPACE-DDTOFS ;IS TERMINATOR A SPACE?
SKIPE WRD ;IS CONSTRUCTED WORD SO FAR ZERO?
TXZ F,OPTRYF ;NO, NOT AN OPCODE
PUSHJ P,EVAL ;TRY FOR A MATCH IN THE S.T.
JRST [TXZ F,OPTRYF ;SO UNDEF TEST BELOW WILL WORK
JRST L27] ;TRY BUILT-IN OPCODES
TXNE F,OPTRYF ;ONLY WANT OPDEFS?
TXNE T,777B8 ;YES, IS THIS ONE?
JRST L3 ;WE'LL TAKE ANYTHING OR THIS IS AN OPCODE
MOVEM T,TENSYM ;ONLY NON-OPCODE FOUND, SAVE TENATIVE MATCH
L27: PUSHJ P,OPEVAL ;SEARCH FOR A (BETTER?) MATCH IN OPCODES
SKIPA T,TENSYM ;NOTHING, HAD BETTER BE A SAVED VAL
JRST L3 ;BETTER MATCH FOUND, GO WITH IT
TXZN F,OPTRYF ;DID EARLIER EVAL FIND ANYTHING?
JRST UND1 ;NO, GIVE UP
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
L3: CAIN W,ASSEM-DDTOFS ;DEFINED SYMBOL FOLLOWED BY #?
JRST ERR ;IF DEFINED, DON'T ALLOW #
L4: TXZE F,MF
MOVN T,T
TXNN F,SF
CAIE W,LPRN-DDTOFS
JRST .+2
JRST LPRN
EXCH T,FRASE1
TXNN F,DVF
IMULB T,FRASE1
TXZE F,DVF
IDIVB T,FRASE1
CAIGE W,ASSEM-DDTOFS
JRST DDTOFS(W) ;MULTIPLY OR DIVIDE
ADDB T,FRASE
CAIGE W,SPACE-DDTOFS
JRST DDTOFS(W) ; + - @ ,
ADD T,WRD
TXNE F,TIF ;TRUNCATE INDICATOR FLAG
HLL T,WRD ;TRUNCATE
MOVEM T,WRD
TXNN F,QF
MOVE T,LWT
SETZM R
MOVE W1,ESTUT
CAMN W1,@USYMP ;IF THERE ARE ANY UNDEFINED SYMBOLS IN
JRST L5 ;THE CURRENT EXPRESSION, ANYTHING EXCEPT
CAILE W,CARR-DDTOFS ;FURTHER EXPRESSION INPUT, OR DEPOSITING
JRST ERR ; INTO MEMORY IS ILLEGAL
L5: CAIG W,RPRN-DDTOFS
JRST DDTOFS(W)
SKIPN PRNC ;WHEN INSIDE ( ), CURRENT EXPRESSION INVALID
JRST DDTOFS(W) ;FOR ANYTHING OTHER THAN MORE EXPRESSION INPUT
JRST ERR
;HANDLE AN UNDEFINED SYMBOL
UND1: SKIPN ESTUT ;ANY UNDEFINED SYMBOL TABLE?
JRST UNDEF ;NO, CAN'T DO THIS
PUSHJ P,EVALU ;SEE IF SYM IS IN THE UNDEFINED TABLE
JRST UND3 ;[245] SYMBOL DOES NOT EXIST
TXNE F,ROF ;[245] SYM EXISTS, LOCATION OPEN
CAILE W,CARR-DDTOFS ;[245] AND STILL BUILDING WORD FOR IT?
JRST UNDEF ;[245] NO - THEN "U" ERROR (E.G. "=" CMD)
CAIE W,ACCF-DDTOFS ;[246] EXPRESSION INVOLVING A COMMA?
SKIPE PRNC ;[246] OR INSIDE PARENTHESIS?
JRST UNDEF ;[246] YES - "U" ERROR
JRST UND4 ;[245] NO, CONTINUE
UND3: CAIN W,ASSEM-DDTOFS ;[245] DEFINING SYMBOL VIA "#" CMD
TXNN F,ROF ;[245] FOR A LOCATION THAT IS OPEN?
JRST UNDEF ;[245] NO - THEN "U" ERROR
SKIPE PRNC ;[246] YES - INSIDE PARENTHESIS?
JRST ERR ;[246] YES - ILLEGAL, "?" ERROR
UND4: MOVEI T,"#"
CAIE W,ASSEM-DDTOFS
PUSHJ P,TOUT
MOVN R,[XWD 2,2]
ADDM R,ESTUT
MOVE T,SYM
TXO T,GLOBL
MOVX R,1B1 ;DEPOSIT INTO 1ST WORD OF UNDEF TABLE
PUSHJ P,DSYMER ;DEPOSIT AND TYPE ? IF IT FAILS
HRRZ T,LLOCO
TXNE F,MF
TXO T,STNEG ;SET FLAG TO SHOW SUBTRACTIVE REQUEST
TXO T,STADD ;SET FLAG TO SHOW UNCHAINED REQUEST
ADDI R,1
PUSHJ P,DSYMER
MOVEI T,0
JRST L4
;DDT'S COMMAND PARSER DETERMINES WHAT TYPE OF COMMAND THIS IS BY
;RANGE-CHECKING THE DISPATCH ADDRESS OF THE COMMAND TO SEE WHICH
;ONE OF THE BELOW REGIONS IT FALLS INTO, THEREFORE:
;
;
; ***** WARNING ******
;
;DO NOT MOVE A COMMAND ROUTINE ACROSS A REGION BOUNDARY UNLESS YOU KNOW
;WHAT YOU ARE DOING! THE PARSER IS VERY UNFORGIVING IN THIS RESPECT!
;
;
;THE FOLLOWING CLASSES OF COMMAND EXIST:
;
;CLASS 1: COMMANDS THAT TAKE NO ARGUMENT, OR THAT TAKE A SYMBOL
; NAME WITHOUT EVALUATION.
;
;CLASS 2: MULTIPLY AND DIVIDE.
;
;CLASS 3: COMMANDS THAT ADD SOME FUNCTION OF THE UPCOMING QUANTITY
; TO THE ACCUMULATING RESULT.
;
;CLASS 4: LAST COMMANDS THAT ARE LEGAL INSIDE PARENTHESES.
;
;CLASS 5: LAST COMMANDS THAT ARE LEGAL WHEN THE EXPRESSION
; CONTAINS UNDEFINED SYMBOLS.
;
;CLASS 6: EVERYTHING ELSE. THESE COMMANDS TYPICALLY TAKE A
; COMPLETELY EVALUATED EXPRESSION, THAT CANNOT CONTAIN
; REFERENCES TO UNDEFINED SYMBOLS.
;
;
;NOTE THAT THESE CLASSES ARE ONLY APPROXIMATE. REFER TO THE CODE IN
;THE COMMAND PARSER FOR DEFINITIVE INFORMATION.
SUBTTL COMMAND DISPATCH TABLE
BDISP: POINT 12,DISP(R),11
POINT 12,DISP(R),23
POINT 12,DISP(R),35
DISP:
DEFINE D (Z1,Z2,Z3)<
BYTE (12) Z1-DDTOFS,Z2-DDTOFS,Z3-DDTOFS
IFN <<Z1-DDTOFS>!<Z2-DDTOFS>!<Z3-DDTOFS>>&<-1,,770000>,
<PRINTX Z1, Z2, OR Z3 TOO LARGE FOR DISPATCH TABLE> >
;THIS MACRO PACKS 3 ADDRESSES INTO ONE WORD; EACH ADR IS 12 BITS
D (ERR,ERR,ERR); (0) ^@ ^A ^B
D (CNTRLZ,ERR,CNTRLE); (3) ^C ^D ^E
D (ERR,ERR,VARRW); (6) ^F ^G ^H
D (TAB,LINEF,ERR); (11) ^I ^J ^K
D (ERR,CARR,ERR); (14) ^L ^M ^N
D (ERR,ERR,ERR); (17) ^O ^P ^Q
D (PUNCH,ERR,ERR); (22) ^R ^S ^T
D (ERR,ERR,ERR); (25) ^U ^V ^W
D (ERR,ERR,CNTRLZ); (30) ^X ^Y ^Z
D (CONTROL,ERR,ERR); (33) ^[ ^\ ^]
D (ERR,ERR,SPACE); (36) ^^ ^_
D (SUPTYO,TEXI,ASSEM); (41) ! " #
D (DOLLAR,PERC,ERR); (44) $ % &
D (DIVD,LPRN,RPRN); (47) ' ( )
D (MULT,PLUS,ACCF); (52) * + ,
D (MINUS,PERIOD,SLASH); (55) - . /
D (NUM,NUM,NUM); (60) 0 1 2
D (NUM,NUM,NUM); (63) 3 4 5
D (NUM,NUM,NUM); (66) 6 7 8
D (NUM,TAG,SEMIC); (71) 9 : ;
D (FIRARG,EQUAL,ULIM); (74) < = >
D (QUESTN,INDIRE,ABSA); (77) ? @ A
D (BPS,CON,SYMD); (102) B C D
D (EFFEC,SFLOT,GO); (105) E F G
D (HWRDS,PILOC,BLKEND); (110) H I J
D (KILL,LOADER,MASK); (113) K L M
D (NWORD,BITO,PROCD); (116) N O P
D (QUAN,RELA,SYMBOL); (121) Q R S
D (TEXO,SETPAG,WATCH); (124) T U V
D (DBLU,XEC,TAPIN); (127) W X Y
D (ZERO,OCON,ICON); (132) Z [ \
D (OSYM,VARRW,UNDRL); (135) ] ^ _
;THIS TABLE DOES NOT HAVE ENTRIES FOR CHARS .GE. 140; THESE
; ARE DETECTED AS ERRORS NEAR L21:
SUBTTL COMMAND ROUTINES -- CLASS 1
;*************** START OF CLASS ONE COMMANDS ***************
;"ERR" IS THE DISPATCH FOR ALL UNDEFINED COMMANDS. VARIOUS COMMANDS
;ALSO JUMP TO ERR, WRONG, ETC. IF THEY DETECT SOME KIND OF ERROR.
WRONG: MOVE W1,[ASCII /XXX/]
PUSHJ P,TEXT
JRST WRONG6
ERR: MOVEI T,"?" ;DDT'S UBIQUITOUS QUESTION MARK
JRST WRONG2 ;JOIN COMMON ERROR PROCESSING
MULDEF: SKIPA T,["M"] ;MULTIPLY-DEFINED SYMBOL
UNDEF: MOVEI T,"U" ;UNDEFINED SYMBOL
WRONG2: MOVE P,[IOWD LPDL,PDL] ;ENSURE FRESH STACK
PUSHJ P,TOUT ;ISSUE ERROR MESSAGE
PUSHJ P,TBEL ;AND DINK THE USER
IFN FTYANK,< ;IF COMMAND FILES SUPPORTED
SKIPE COMAND ;IN A COMMAND FILE?
SKIPN YASWF ;YES, ABORT ON COMMAND ERROR?
JRST WRONG4 ;KEEP ON GOING (IGNORE ERROR)
PUSHJ P,PTRKIL ;KILL OFF THE COMMAND FILE
PUSHJ P,TBEL ;DINK THE USER
PUSHJ P,TBEL ; AGAIN
TXZ F,ROF ;ARBITRARILY CLOSE OPEN LOCATION
> ;END IFN FTYANK
WRONG4: PUSHJ P,TTYCLR ;CLEAR INPUT BUFFER
WRONG6: TXNN F,ROF ;REGISTER OPEN?
JRST DD1 ;NO, CRLF. OTHERWISE, FALL INTO RET
RET: MOVE P,[IOWD LPDL,PDL]
PUSHJ P,TTAB ;COMMON RETURN
JRST DD2
;HERE ON A DIGIT
NUM: ANDI T,17 ;T HOLDS CHARACTER
TXNE F,CF!FPF
JRST NM1
MOVE W,SYL
LSH W,3
ADD W,T
MOVEM W,SYL
MOVE W,DEN
IMULI W,12 ;CONVERT TO DECIMAL
ADD W,T
MOVEM W,DEN
AOJA T,LE1A
DOLLAR: SKIPA T,[46+101-13] ;RADIX 50 $ TO BE
PERC: MOVEI T,47+101-13 ;PERCENT SIGN
LET: TXC F,SF!FPF ;EXPONENT IFF (LTF)'*(FEF)'*(T=105)*(SF)*(FPF)=1
TXZN F,LTF!FEF!SF!FPF
CAIE T,105 ; E
TXOA F,LTF
TXOA F,FEF
JRST LET1
TXZN F,MF
SKIPA W1,SYL
MOVN W1,SYL
MOVEM W1,FSV
CLEARM DEN
LET1: SUBI T,101-13 ;FORM RADIX 50 SYMBOL
LE1A: TXO F,SF!QF
LE2: SOSGE TEM ;IGNORE CHARACS AFTER 6
JRST L2
MOVEI W,50
IMULM W,SYM ;MULTIPLY BY RADIX 50
ADDM T,SYM ; AND ADD NEW CHAR INTO SYM
MOVEI T,"A"-13(T) ;CONVERT LETTERS BACK TO ASCII
IDPB T,CHP
JRST L2
NUM1: MOVE W,WRD2O ;OCTAL FORM OF NUMBER AFTER $
LSH W,3
ADD W,T
MOVEM W,WRD2O
EXCH T,WRD2D ;DECIMAL FORM OF NUMBER AFTER $
IMULI T,12
ADDM T,WRD2D
TRO F,Q2F
JRST L2
NM1: TXNE F,CF
JRST NUM1
MOVEI W1,6 ;FORM FLOATING POINT NUMBER
AOS NM1A
XCT NM1A ;MOVEI W2,..
MOVSI R,201400
NM1A1: TRZE W2,1
FMPR R,FT(W1)
JUMPE W2,NM1B
LSH W2,-1
SOJG W1,NM1A1
NM1B: MOVSI W1,211000(T)
FMPR R,W1 ;COMPUTE VALUE OF NEW DIGIT
FADRB R,FH ;ADD VALUE INTO FLOATING NO.
MOVEM R,SYL
AOJA T,LE1A
POWER: TXNN F,FEF
JRST L4 ;NO EXPONENT
CAIE W,PLUS
CAIN W,MINUS
TROE F,POWF
TRZA F,POWF
JRST (W) ; E+-
MOVE W2,DEN
CLEARM FRASE
MOVEI W1,FT-1
TXZE F,MF
MOVEI W1,FT01
SKIPA T,FSV
POW2: LSH W2,-1
TRZE W2,1
FMPR T,(W1)
JUMPE W2,L4
SOJA W1,POW2
PERIOD: TXNN F,CF!CCF ;$. OR $$. COMMAND?
JRST PERIO2 ;NO, JUST . CHARACTER BY ITSELF
IFE FTFILE,< ;YES
SKIPN BPTIP ;BREAKPOINT IN PROGRESS?
JRST ERR ;NO, THEN NOT LEGAL AFTER ALL
TXNN F,CCF ;$. OR $$. COMMAND?
SKIPA T,PCWRD ;$. -- CURRENT $X PC
MOVE T,I.NPC ;$$. -- PREVIOUS $X PC
TXZA F,CF!CCF ;CLEAR CONTROL FLAGS
> ;END IFE FTFILE
IFN FTFILE,<JRST ERR> ;ILLEGAL IN FILDDT
PERIO2: MOVE T,LLOC ;JUST ".", LAST LOCATION OPENED
TXNE F,SF
MOVE T,DEN
MOVEM T,SYL
TXNE F,FPF ;HAS A PERIOD BEEN SEEN BEFORE?
TXO F,LTF ;YES, TWO PERIODS MAKES A SYMBOL
TXON F,FPF!SF!QF
MOVEI T,0
IDIVI T,400
SKIPE T
TLC T,243000
TLC W1,233000
FAD T,[0] ;NORMALIZE T AND W1
FAD W1,[0]
FADR T,W1
MOVEM T,FH
HLLZS NM1A
MOVEI T,45 ;RADIX 50 PERIOD
JRST LE2
IFE FTFILE,<
PILOC: MOVEI T,SAVPI> ;GET ADDRESS FOR $I
QUANIN: JRST QUAN1
QUAN: TXNN F,CCF ;$Q OR $$Q, WHICH?
SKIPA T,LWT ;$Q STRAIGHT
MOVS T,LWT ;$$Q SWAPPED
QUAN1: MOVEM T,SYL
QUAN2: TXO F,SF!QF ;WRD,SYL STARTED
TXZ F,CF!CCF
JRST L2
;HERE WHEN ESC TYPED
CONTRO: TXOE F,CF
TXO F,CCF
SETOM WAKALL ;SET WAKEUP ON EVERYTHING
JRST L2
IFN FTFILE,<PILOC==ERR>
QUESTN: PUSHJ P,TCRLF ;HERE FOR "?"
TXNE F,LTF ;HAS A SYMBOL BEEN TYPED?
JRST QLIST ;YES
PUSHJ P,USYSET ;NO, LIST UNDEFINED SYMBOLS
QUEST2: SOSGE R ;POINT TO NAME WORD OF PREVIOUS SYMBOL
PUSHJ P,ADVSYM ;DONE, SEE IF ANY MORE TABLE
SKIPA W2,@SYPTR ;GET THE NAME
JRST DD1 ;ALL DONE, <CRLF> AND RESTART
TXZ W2,PNAME ;CLEAR FLAGS
PUSHJ P,PSYM ;TYPE THE SYMBOL
PUSHJ P,TCRLF ;END WITH A CRLF
SOJA R,QUEST2 ;SKIP VAL WORD OF NEXT SYMBOL AND LOOP
;HERE TO LIST ALL REFERENCES TO A SYMBOL
QLIST: PUSHJ P,SYMSET ;SET UP TO WALK THROUGH TABLE
QLIST2: SOSGE R ;ANY MORE TABLE?
PUSHJ P,ADVSYM ;MAYBE NOT, CHECK IT OUT
SKIPA W1,@SYPTR ;YES, GET THE NEXT NAME
JRST DD1 ;ALL DONE, <CRLF> AND GET NEXT COMMAND
TXZE W1,PNAME ;IS THIS THE NEXT MODULE NAME?
JRST QLIST4 ;NO, GO SEE IF THE SYMBOL NAME MATCHES
MOVE W2,W1 ;SAVE THIS MODULE NAME IN CASE WE MATCH
SOJA R,QLIST2 ;GET NEXT NAME
QLIST4: CAME W1,SYM ;A MATCH?
SOJA R,QLIST2 ;NO, PROCEED
PUSHJ P,PSYM ;YES, TYPE CURRENT MODULE NAME
MOVE W1,@SYPTR ;RETRIEVE FLAGS
TXNN W1,GLOBL ;A GLOBAL SYMBOL?
JRST QLIST6 ;NO, GO TYPE CRLF
PUSHJ P,TSPC ;YES, TYPE " G"
MOVEI T,"G" ; . . .
PUSHJ P,TOUT ; . . .
QLIST6: PUSHJ P,TCRLF ;END LINE
SOJA R,QLIST2 ;ON TO ANOTHER SYMBOL
;$K COMMAND -- SUPPRESS A SYMBOL TO DDT TYPEOUT OR DELETE IT ENTIRELY
KILL: TXNN F,LTF ;DELETE SYMBOLS
JRST ERR
MOVE S,SYM ;GET SYMBOL
PUSHJ P,DELCSH ;REMOVE SYMBOL FROM SYMBOL TABLE CACHE
PUSHJ P,EVAL
JRST KILL2
MOVE R,W1 ;SYMBOL INDEX INTO R
MOVE T,W2 ;FLAGS INTO T
TXO T,DELO ;ASSUME DELETE OUTPUT
TXNE F,CCF ;$$K?
MOVX T,DELO!DELI!37777B17 ;MAKE SYM DELETED IN AND OUT
PJRST DSYMER ;DEPOSIT IF POSSIBLE
KILL2: SKIPN ESTUT ;ANY UNDEFINED TABLE?
JRST UNDEF ;NO, CAN'T FIND THE SYMBOL
KILL4: PUSHJ P,EVALU ;SEE IF ANY MORE OCCURENCES OF SYM
POPJ P, ;NO, DONE
PUSHJ P,REMUN
JRST ERR ;CAN'T MODIFY SYMTAB
JRST KILL4 ;LOOK FOR MORE OCCURENCES
;$D ;DELETE LAST SYM & PRINT NEW
SYMD: MOVE R,SPSAV ;PICK UP POINTER TO LAST SYM
JUMPE R,ERR
PUSHJ P,FETSYM ;PICK UP SYMBOL
JRST ERR ;CAN'T GET IT?
MOVE S,T ;COPY SYMBOL
PUSHJ P,DELCSH ;REMOVE IT FROM THE SYMBOL TABLE CACHE
TXO T,DELO ;TURN ON "SUPPRESS OUTPUT" BIT
PUSHJ P,DSYMER ;STORE BACK IN SYMBOL TABLE
MOVE T,LWT
JRST CONSYM ;PRINT OUT NEXT BEST SYMBOL
;COLON OR ALT COLON COMMANDS
TAG: TXNE F,CF ;DEFINE SYMBOL OR OPEN SYMBOL TABLE?
JRST NAMSET ;OPEN (SELECT) LOCAL SYMBOL TABLE
TXNN F,LTF ; NO LETTERS IS ERROR
JRST ERR ; GO SAY ERROR
TXNE F,FAF ; DEFINE SYMBOLS
JRST DEFIN ;A.LT.B:
MOVE W,LLOCO ;DEFINE SYMBOL (TAG) TO BE "."
MOVEM W,LLIMIT ;SAVE NEW TAG VALUE
DEFIN: MOVE S,LLIMIT ;GET VALUE BEING DEFINED
PUSHJ P,DELCSV ;REMOVE ANY CACHE SYMBOL USING THIS VALUE
PUSHJ P,EVAL ;DEFINED SYMBOL?
JRST DEF1 ;NO - DEFINE
MOVE S,SYM ;YES - GET SYMBOL NAME BEING DEFINED
PUSHJ P,DELCSH ;REMOVE THE SYMBOL FROM THE CACHE
MOVE R,W1 ;REMEMBER SYMBOL INDEX IN R
JRST DEF4 ;REDEFINE EXISTING SYMBOL
DEF1: TXZ F,HSYMF ;ASSUME LOWSEG SYMBOL TABLE
SKIPL R,@SYMP ;DEFINE A NEW SYMBOL
JRST [PUSHJ P,GETHSO ;NO ST, TRY HI SEG PTR
JUMPE T,ERR ;DIE IF NONE
MOVEI R,.JBHSM ;HI SEG SYMBOL TABLE PTR
ADD R,T ;ABSOLUTE
SKIPL T,SAVHSM ;GET CURRENT VALUE OF PTR
JRST ERR ;NONE THERE EITHER
SUB T,[2,,2] ;MAKE ROOM FOR NEW SYMBOL
PUSHJ P,DMEMER ;TRY TO UPDATE HISEG ST PTR
MOVE R,T ;PUT UPDATED PTR IN RIGHT AC
TXO F,HSYMF ;REMEMBER HISEG TABLE USED
SKIPL PRGM ;AN OPEN MODULE IN THE HIGH SEG?
JRST DEF2 ;NO, CONTINUE
AOS PRGM ;YES, COMPENSATE FOR SUBTRACTING 2
AOS PRGM ; FROM THE SYMBOL TABLE POINTER
JRST DEF2] ;CONTINUE
SUB R,[2,,2]
MOVEM R,@SYMP ;DECREMENT LO SEG SYM POINTER
SKIPG PRGM ;AN OPEN MODULE IN THE LOWSEG TABLE?
JRST DEF2 ;NO, CONTINUE
AOS PRGM ;YES, COMPENSATE FOR THE SUB
AOS PRGM ; . . .
DEF2: SOS ESTUT ;EAT TWO WORDS OF PATCH SPACE
SOS ESTUT ; FOR NEW SYMBOL TO LIVE IN
SKIPL ESTUT ;DOES AN UNDEFINED TABLE EXIST?
JRST DEF3 ;NO
;FALL THROUGH TO NEXT PAGE
;HERE WHEN WE WANT TO INSERT A NEW SYMBOL, BUT THE UNDEFINED SYMBOL
;TABLE IS IN THE WAY. MOVE THE LAST SYMBOL OF THE UNDEFINED TABLE TO
;RIGHT BEFORE THE FIRST ONE, AND USE THE WORDS FREED TO INSERT THE NEW
;DEFINED SYMBOL. THIS IS OK BECAUSE THE UNDEFINED TABLE IS NOT ORDERED.
HLRE R,ESTUT ;GET -LENGTH OF UNDEFINED TABLE
MOVN R,R ;POINT TO 1ST WORD NOT IN UNDEFINED TABLE
TXO R,1B1 ;FORM AN UNDEFINED ST SYMBOL INDEX
PUSHJ P,FETSYM ;GET 1ST WORD OF LAST SYMBOL
JRST ERR ;ERROR?
MOVE W1,R ;SAVE WHERE WE GOT IT
MOVX R,1B1 ;POINT TO 1ST WORD (USED TO BE IN PATCH AREA)
PUSHJ P,DSYMER ;STORE SYMBOL IN NEW HOME
AOS R,W1 ;POINT TO 2ND WORD OF LAST SYMBOL
PUSHJ P,FETSYM ;GET IT
JRST ERR ;ERROR
MOVX R,1B1+1 ;2ND WORD OF TABLE
PUSHJ P,DSYMER ;DEPOSIT
;NOW TO STORE THE SYMBOL TO BE DEFINED. ENTER AT DEF3 TO APPEND TO THE
;SYMBOL TABLE AS A GLOBAL DEFINITION IN MODULE PAT.., AND AT DEF4 TO
;UPDATE AN EXISTING SYMBOL.
DEF3: MOVE T,ESTUT ;IT ALL WORKED, MAKE OUR WORKING COPY OFFICIAL
MOVEM T,@USYMP ;BY STORING IT IN THE GLOBAL PLACE
PUSH P,SYM ;IF APPENDING, NEED TO UPDATE THE MODULE
MOVX R,<RADIX50 0,PAT..> ; LENGTH FOR THE MODULE "PAT.."
MOVEM R,SYM ;SAVE WHERE NAMSRH CAN FIND IT
PUSHJ P,NAMSRH ;LOOK UP PAT.. IN THE TABLE
JRST DEF3A ;NOT THERE, GIVE UP
PUSHJ P,FETSYM ;GET ITS VALUE WORD
JRST DEF3A ;NOT ACCESSIBLE?
JUMPGE T,DEF3A ;DON'T IF COUNT IS 0 (OLD LINK BUG)
SUB T,[2,,0] ;COUNT ANOTHER SYMBOL
PUSHJ P,DEPSYM ;STORE NEW VALUE
JFCL ;??
DEF3A: POP P,SYM ;RESTORE SYM FOR DEF4
TXNN F,HSYMF ;CHANGING HISEG TABLE?
TDZA R,R ;NO, POINT TO 0'TH WORD OF LOWSEG TABLE
MOVX R,1B0 ;YES, POINT TO 0'TH WORD OF HISEG TABLE
DEF4: MOVX T,GLOBL
IOR T,SYM
PUSHJ P,DSYMER
MOVE T,LLIMIT
ADDI R,1
PUSHJ P,DSYMER
;FALL THROUGH TO NEXT PAGE
;NOW TO SEARCH THE UNDEFINED TABLE, LOOKING FOR REFERENCES TO THIS SYMBOL.
;IF WE FIND ANY, FIX UP THE LOCATION(S) THEY POINT TO, AND REMOVE THEM
;FROM THE UNDEFINED TABLE.
DEF5: PUSHJ P,EVALU ;SEARCH UNDEFINED TABLE
POPJ P, ;NOT FOUND, ALL DONE
SKIPL R,T ;ADDITIVE OR CHAINED FIXUP?
JRST DEF7 ;CHAINED, GO HANDLE
PUSHJ P,FETCHL ;GET OBJECT CELL
JRST ERR
TXNN R,STNEG ;ADDITIVE OR SUBTRACTIVE?
SKIPA S,LLIMIT ;ADDITIVE
MOVN S,LLIMIT ;SUBTRACTIVE
TXNE R,STLH ;RIGHT OR LEFT HALF?
JRST [HRLZS S ;LEFT HALF
ADD T,S ;ADD INTO LEFT HALF
JRST DEF6]
ADD S,T ;RIGHT HALF, ADD HALVES
HRR T,S ; AND REPLACE RIGHT HALF
DEF6: PUSHJ P,STOREL ;STORE RESULT BACK INTO LOCAL SECTION MEMORY
JRST ERR ;FAILED
JRST DEF8 ;GO REMOVE SYMBOL AND TRY AGAIN
DEF7: JUMPE R,DEF8 ;IF CHAIN REACHES 0, WE'RE DONE
PUSHJ P,FETCHL ;GET OBJECT CELL
JRST ERR
HRRZ S,T ;SAVE CHAIN POINTER
HRR T,LLIMIT ;REPLACE WITH NEW VALUE
PUSHJ P,STOREL ;AND STORE BACK INTO LOCAL SECTION MEMORY
JRST ERR ;FAILED
HRRZ R,S ;LOOP TO END
JRST DEF7 ; OF CHAIN
DEF8: PUSHJ P,REMUN
JRST ERR ;CAN'T MODIFY SYMTAB
JRST DEF5
;HERE ON A NAME$: COMMAND -- OPEN A MODULE'S SYMBOL TABLE
NAMSET: TXNE F,QF ;ANYTHING TYPED?
JRST NAMS2 ;YES, SET NEW MODULE
SETZM PRGM ;NO, JUST CLEAR CURRENT MODULE
SETZM SEGNAM ;AND HISEG IT CAME FROM
PJRST CLRCSH ;ZERO THE SYMBOL TABLE CACHE AND RETURN
;HERE TO SET A NEW MODULE NAME.
NAMS2: PUSHJ P,NAMSRH ;SEARCH FOR THE NAME
JRST UNDEF ;NOT FOUND
PUSHJ P,CLRCSH ;FOUND IT, CLEAR THE SYMBOL TABLE CACHE
MOVEM R,PRGM ;STORE AS NEW OPEN MODULE
JUMPGE R,CPOPJ ;DONE IF R POINTS TO LOW SEG
MOVEI R,.JBHNM ;POINTS TO HI SEG, POINT TO SEGMENT NAME
PUSHJ P,HFETCH ;GET IT
MOVEI T,0 ;NO HI SEG, OR EXEC MODE
MOVEM T,SEGNAM ;STORE SEGMANT NAME FOR SYMCHK
POPJ P, ;DONE
;TEXT COMMANDS: "X$, $"X$, "/.../, $"/.../, XXXX$5"
TEXI: TRZE F,Q2F ;QUANT AFTER $ ?
JRST [MOVE T,WRD2D ;YES
CAIE T,5 ; $5" ?
JRST ERR ;NO, ONLY CASE KNOWN
MOVE T,SYM ;YES, TAKE PREVIOUS SYL AS RADIX50
TXZ F,FPF!FEF!LTF ;REINIT SYL
JRST QUAN1]
TXO F,TXF ;FLAG PROCESSING TEXT
MOVE T,LLOCO ;GET ADR OF OPEN REG
MOVEM T,TEM ;SAVE IT FOR LOCAL USE
PUSHJ P,TEXIN0 ;GET TERMINATOR
MOVEM T,SYL ;SAVE TERMINATOR
PUSHJ P,TIN ;GET FIRST CHARACTER
CAIN T,.CHESC ;ESC?
JRST QUAN2 ;YES, EQUALS ONE ASCII/SIXBIT CHAR
PUSHJ P,TEXIN1 ;CONVERT TO SIXBIT IF NECESSARY
TEXI4: MOVE W1,[POINT 7,W] ;SETUP TO BUILD WORD IN W
TXNE F,CF ;SIXBIT?
HRLI W1,(POINT 6,0) ;YES, MODIFY BYTE POINTER
MOVEI W,0 ;INIT WORD TO 0
TEXI2: CAMN T,SYL ;REACHED TERMINATOR?
JRST [MOVE R,TEM ;LAST ADDRESS
MOVEM R,LLOC ;SET LOC TO END OF INPUT
MOVEM R,LLOCO
MOVE T,W ;GET LAST WORD
JRST QUAN1] ;GO USE AS QUANTITY
TXNN W1,76B5 ;ROOM FOR ANOTHER BYTE IN WORD?
JRST TEXI3 ;NO
IDPB T,W1 ;YES, STORE IT
PUSHJ P,TEXIN0 ;GET ANOTHER INPUT CHARACTER
JRST TEXI2
;HERE WHEN WORD FULL
TEXI3: MOVSI W1,(POINT 0,0)
TXNN F,ROF ;REGISTER OPEN?
JRST TEXI2 ;NO, LOSE ANY ADDITIONAL INPUT
PUSH P,T ;SAVE CHARACTER
MOVE T,W ;GET FULL WORD
MOVE R,TEM ;GET LOC OF NEXT REGISTER
PUSHJ P,DMEMER ;STORE WORD IF POSSIBLE
AOS TEM ;BUMP LOC
POP P,T ;RECOVER CHARACTER
JRST TEXI4 ;GO REINIT WORD AND CONTINUE INPUT
;GET INPUT CHARACTER, CONVERT TO SIXBIT IF NECESSARY
TEXIN0: PUSHJ P,TIN ;GET CHAR
TEXIN1: TXNN F,CF ;SIXBIT MODE?
POPJ P, ;NO
CAIL T,"A"+40 ;IS CHAR BETWEEN LOWER CASE "A" AND
CAILE T,"Z"+40 ; LOWER CASE "Z"?
SKIPA ;NO
TRC T,40 ;YES, CONVERT TO UPPER CASE
CAIL T," " ;IS CHAR IN SIXBIT SET?
CAILE T,"_"
JRST ERR ;NO
ANDI T,77 ;YES, MASK TO 6 BITS
TRC T,40 ;CONVERT TO SIXBIT FORM
POPJ P,
;$L COMMAND -- PUNCH RIM10B LOADER
IFN FTPTP,<
LOADER: SKPUSR
TXNE F,QF
JRST ERR
MOVEI T,400
PUSHJ P,FEED
MOVE R,LOADE
LOAD1: MOVE T,0(R)
PUSHJ P,PWRD
AOBJN R,LOAD1
MOVEI T,20
LOAD2: PUSHJ P,FEED
JRST RET
;RIM10B CHECKSUM LOADER
LOADB:
.PHASE 0
XWD -16,0
BEG: CONO PTR,60
HRRI AA,RD+1
RD: CONSO PTR,10
JRST .-1
DATAI PTR,@TBL1-RD+1(AA)
XCT TBL1-RD+1(AA)
XCT TBL2-RD+1(AA)
AA: SOJA AA,
TBL1: CAME CKSM,ADR
ADD CKSM,1(ADR)
SKIPL CKSM,ADR
TBL2: JRST 4,BEG
AOBJN ADR,RD
ADR: JRST BEG+1
CKSM=ADR+1
.DEPHASE
LOADE: XWD LOADB-.,LOADB
> ;END IFN FTPTP
IFE FTPTP,<LOADER==ERR>
;DDT EXIT AND RESTART COMMANDS (^C, ^E, AND ^Z)
;FIRST, THE NON-FILDDT CASE
IFE FTFILE,<
CNTRLZ:
IFN FTEXEC,<
SKPUSR ;SEE IF USER MODE
JRST ERR ;NO--ERROR
> ;END IFN FTEXEC
IFN FTDEC10,<MOVE T,[EXIT 1,]> ;GET MONRET
IFN FTDEC20,<MOVE T,[HALTF%]> ;HALT THIS FORK
JRST XEC0 ;GO EXECUTE IT
CNTRLE==ERR ;^E ONLY WORKS IN FILDDT
>; END IFE FTFILE
;NOW THE FILDDT ROUTINES
IFN FTFILE,<
CNTRLZ: PUSHJ P,CLSFIL ;CLOSE OFF THE INPUT FILE
RESET ;CLEAN UP THE WORLD
IFN FTDEC10,<EXIT 1,> ;RETURN TO THE MONITOR
IFN FTDEC20,<HALTF%> ; . . .
JRST DDT ;USER SAID "CONTINUE"
;HERE ON ^E COMMAND. CLOSE THE CURRENTLY-OPEN FILE AND RESTART.
CNTRLE: PUSHJ P,CLSFIL ;CLOSE OFF THE INPUT FILE
RESET ;MAKE SURE
JRST DDT ;RESTART
;STILL FTFILE
;HERE TO WRITE OUT THE MODIFIED WINDOWS AND CLOSE THE INPUT FILE
CLSFIL: SKIPN FILING ;SEE IF NOT /M
POPJ P, ;NO FILE CLOSE ON /M
SKIPN PATCHS ;/P?
JRST FILREL ;NO, JUST RELEASE THE CHANNEL
SKIPN CHGSFL ;SEE IF SYMBOL TABLE CHANGED
JRST SCPDON ;JUMP IF NOT
SKIPE SYMGOT ;YES, DID IT COME FROM ANOTHER FILE?
SKIPE PHYSIO ;OR ARE WE DOING PHYSICAL I/O?
JRST SCPDON ;YES TO EITHER, NO RE-WRITING SYM TAB
;WE KNOW WE WANT TO WRITE THE SYMBOLS BACK, NOW SEE IF SAFE TO DO SO.
;DON'T WANT TO IF THE USER CHANGED A SYMBOL TABLE POINTER, SINCE HE
;PROBABLY KNOWS WHAT'S GOING ON BETTER THAN WE DO.
MOVEI R,.JBSYM ;RE-FETCH FILE'S .JBSYM
PUSHJ P,FETCH ;GET FROM THE FILE
SETCM T,FOSPTR ;NOT THERE? MAKE SURE COMPARE FAILS
CAME T,FOSPTR ;SAME AS WHEN SYMS WERE COPIED?
JRST SCPERR ;NO, USER DEPOSITED .JBSYM -- ABORT
EXCH T,FISPTR ;STORE CURRENT .JBSYM IN FISPTR
MOVEM T,FOSPTR ;STORE PTR INTO FILDDT IN FOSPTR
MOVEI R,.JBUSY ;POINT TO FILE'S .JBUSY
PUSHJ P,FETCH ;FETCH IT
SETCM T,FOUPTR ;GONE??
MOVE W,FIUPTR ;SAVE FILDDT'S UNDEFINED PTR
MOVE W1,SAVHSM ;AND FILDDT'S HISEG PTR
MOVEM T,FIUPTR ;SET UP PTRS FOR SYMCHK
PUSHJ P,SYMCHK ;MAKE SURE VALID, SETUP FIUPTR & SAVHSM
EXCH W,FOUPTR ;STORE FILDDT'S PTRS IN OLD SYM VARS
EXCH W1,OLDHSM ; AND FETCH FILE VALUES ON ENTRY
CAMN W,FIUPTR ;DID .JBUSY CHANGE?
CAME W1,SAVHSM ;DID .JBHSM CHANGE?
JRST SCPERR ;YES, DON'T COPY BACK
XOR W1,OLDHSM ;DOES FILDDT'S COUNT AGREE WITH FILE'S?
TLNE W1,-1 ;MUST AGREE, SINCE NO ROOM FOR PATCHING
JRST SCPERR ;DIFFERENT, GIVE UP
;FALL THROUGH TO NEXT PAGE
;STILL FTFILE
;FALL IN FROM PREVIOUS PAGE
;IT'S OK TO UPDATE THE FILE'S SYMBOL TABLE. NOW PUT THE FILE'S NEW
;POINTERS INTO FI?PTR AND SAVHSM (FILDDT'S PTRS ARE ALREADY IN FO?PTR
;AND OLDHSM).
HLLO T,FISPTR ;GET OLD SYMBOL COUNT
SUB T,FOSPTR ;SUBTRACT TO GET DIFF IN LH
HLR T,T ;FORM N,,N
EXCH T,FISPTR ;GET OPERANDS IN ORDER FOR SUBTRACT
SUBB T,FISPTR ;BACK .JBSYM UP INTO PATCH SPACE
HLRE S,FOUPTR ;GET -COUNT OF NEW UNDEF S.T.
ADD T,S ;GET START ADDRESS OF NEW UNDEF S.T.
HLL T,FOUPTR ;FORM -N,,ADDR (.JBUSY FORMAT)
MOVEM T,FIUPTR ;SAVE FOR LATER UPDATE
;NOW COPY THE UNDEFINED TABLE INTO THE FILE.
HRRZ R,FIUPTR ;WHERE IN THE FILE TO PUT THE DATA
SKIPL W1,FOUPTR ;AOBJN PTR TO FILDDT'S UNDEFS, IF ANY
JRST NOUCPY ;NOTHING TO COPY, JUST GO UPDATE .JBUSY
OUCPY: MOVE T,(W1)
PUSHJ P,DEPMEM
JRST SCPERR ;GIVE UP COPY IF CAN'T STORE
AOS R
AOBJN W1,OUCPY
;NOW UPDATE .JBUSY (EVEN IF NO UNDEFS), THEN COPY THE DEFINED SYMBOLS
NOUCPY: MOVE T,FIUPTR ;DATA TO STORE
MOVEI R,.JBUSY ;WHERE TO STORE IT
PUSHJ P,DEPMEM ;DO THE STORE
JRST SCPERR ;FAILED
HRRZ R,FISPTR ;WHERE IN THE FILE TO PUT THE SYMS
SKIPL W1,FOSPTR ;AOBJN PTR TO FILDDT'S SYMS
JRST NOSCPY ;NONE TO COPY, GO LOOK FOR HIGH SEG SYMS
OSCPY: MOVE T,(W1)
PUSHJ P,DEPMEM
JRST SCPERR ;ERROR
AOS R
AOBJN W1,OSCPY
;FALL THROUGH TO NEXT PAGE
;STILL FTFILE
;FALL IN FROM PREVIOUS PAGE
;NOW UPDATE .JBSYM, THEN COPY ANY HIGH SEG SYMBOLS. NOTE THAT WE DON'T
;UPDATE .JBHSM, SINCE IT'S AN ERROR ABOVE IF IT CHANGED.
NOSCPY: MOVE T,FISPTR ;THE DATA TO STORE
MOVEI R,.JBSYM ;WHERE TO STORE IT
PUSHJ P,DEPMEM ;STORE NEW POINTER
JRST SCPERR ;COMPLAIN IF ERROR
HRRZ R,SAVHSM ;WHERE TO STORE THE HIGH SEG SYMS
SKIPL W1,OLDHSM ;GET AOBJN PTR TO FILDDT'S, IF ANY
JRST SCPDON ;NONE, ALL DONE WITH COPY
HSCPY: MOVE T,(W1) ;GET NEXT DATA WORD
PUSHJ P,DEPMEM ;STORE IN FILE
JRST SCPERR ;ERROR?
AOS R ;BUMP PTR INTO FILE
AOBJN W1,HSCPY ;LOOP OVER ALL OF FILDDT'S SYMBOLS
JRST SCPDON ;DONE UPDATING SYMBOLS
;HERE IF WE TRIED BUT FAILED TO UPDATE THE FILE'S SYMBOL TABLE.
SCPERR: TMSG <
% Update of file's symbol table failed
>
;FALL INTO SCPDON
;STILL UNDER FTFILE
;FALL HERE FROM PREVIOUS PAGE
;OPERATING SYSTEM DEPENDENT ROUTINES TO CLOSE OUT THE FILE
SCPDON:
IFN FTDEC20,<
SKIPN PHYSIO ;PHYSICAL I/O?
JRST FILREL ;NO, JUST UNMAP THE PAGES
>
SETZM WINNUM ;START WITH WINDOW ZERO
WRTLP: MOVE TT2,WINNUM ;GET WINDOW NUMBER
MOVE T,WINDIR(TT2) ;GET PAGTBL ADDRESS
TXNN T,SV$MOD ;DID THIS PAGE GET MODIFIED?
JRST WRTLP2 ;NO
MOVE TT1,WINFPN(TT2) ;YES, FILE PAGE NUMBER
PUSHJ P,WRTWIN ;WRITE THE WINDOW
JFCL ; SIGH
WRTLP2: AOS TT2,WINNUM ;STEP TO NEXT WINDOW
CAIGE TT2,WINMAX ;MORE?
JRST WRTLP ;YES--KEEP GOING
;ALL WINDOWS WRITTEN OUT, CLOSE OFF THE FILE
IFN FTDEC10,<
FILREL: CLOSE FIL, ;TELL MONITOR WE'RE DONE WITH FILE
STATZ FIL,IO.ERR ;ALL OK?
TMSG <
? OUTPUT error on CLOSE
>
RELEAS FIL, ;GIVE UP CHANNEL
POPJ P, ;AND RETURN
> ;END OF IFN FTDEC10
IFN FTDEC20,<
FILREL: SKIPE PHYSIO ;PHYSICAL I/O?
POPJ P, ;YES, DON'T BOTHER
SETO T1, ;WANT TO "CLOSE" THE FILE
MOVE T2,WIND0 ;BASE ADDRESS OF "BUFFERS"
LSH T2,WRD2PG ;BASE PAGE NUMBER
HRLI T2,.FHSLF ;THIS PROCESS
MOVX T3,PM%CNT!WINMAX;GET ALL INTERNAL "WINDOWS"
PMAP% ;UNMAP ALL POSSIBLE MAPPED FILE PAGES
MOVE T1,FILJFN ;JFN OF OPEN FILE
CLOSF% ;CLOSE OFF THE FILE
JFCL ; ???
POPJ P, ;RETURN
> ;END OF IFN FTDEC20
> ;END IFN FTFILE FROM PAGES AGO
SUBTTL COMMAND ROUTINES -- CLASS 2
;*************** START OF CLASS TWO COMMANDS ***************
MULT: TXOA F,PTF!MLF ;*
DIVD: TXO F,DVF!PTF ;SINGLE QUOTE
JRST L1
SUBTTL COMMAND ROUTINES -- CLASS 3
;*************** START OF CLASS THREE COMMANDS ***************
ASSEM: JRST LIS2 ;[242] #
MINUS: TXO F,MF
PLUS: TXO F,PTF
JRST LIS2
LPRN: PUSH P,F ;RECURSE FOR OPEN PAREN
PUSH P,WRD
PUSH P,FRASE
PUSH P,FRASE1
AOS PRNC
SETZM WAKALL ;[242] SET WAKEUP SET TO PUNCT AND CTRLS
JRST LIS0C ;[242] AND READ NEW EXPRESSION
INDIRE: HRLZI W,20 ;@
IORB W,WRD
TXO F,QF
JRST LIS2
ACCF: MOVE R,ESTUT ;[246] GET UNDEFINED PROCESSOR SO FAR
CAME R,@USYMP ;[246] ANY UNDEFINED'S CREATED YET?
JRST ERR ;[246] YES, ERROR
;[246] (CAN ONLY GET HERE ON "FOO#," ETC.)
MOVE R,T ;COMMA PROCESSOR
XCT ACCCF ;MOVEI T,..
TXOE F,COMF ;COMMA TYPED BEFORE?
JRST ACCF1 ;YES
HRRM R,ACCCF ;NO, SAVE LEFT HALF OF A,,B
HLLZ T,R
LDB W1,[POINT 3,WRD,2] ;CHECK FOR IO INSTRUCTION
CAIE W1,7 ;7XX?
JRST ACCF0 ;NO, ASSUME AC FIELD
MOVX W1,774B11 ;YES, CHECK DEVICE CODE FIELD
TDNE W1,WRD ;DEVICE CODE FILLED IN YET?
ACCF0: TDZA W1,W1 ;YES, OPCODE WAS UMOVE, RDTIME, ETC.
; ASSUME AC FIELD
MOVEI W1,1 ;NO, OPCODE WAS CONO, DATAO, ETC.
; ASSUME DEVICE CODE
LSH R,27(W1) ;MOVE QUANTITY TO CORRECT FIELD
ADD T,R
ADDB T,WRD
JRST SPACE1
ACCF1: ADD T,WRD ; FOR ",," GET LEFT HALF TOGETHER
HRLZM T,WRD ; AND PUT IT IN LEFT HALF
JRST SPACE1
SUBTTL COMMAND ROUTINES -- CLASS 4
;*************** START OF CLASS FOUR COMMANDS ***************
SPACE: TXO F,SPF ;(E.G., "JRST PAT..") FLAG SPACE TYPED
SPACE1: TXO F,TIF ;FLAG TRUNCATE (ADD MOD 2**18)
TXZ F,MF!PTF
JRST LIS1
RPRN: TXNN F,QF ;)
MOVEI T,0
MOVS T,T
SOSGE PRNC
JRST ERR
POP P,FRASE1
POP P,FRASE
POP P,WRD
POP P,F
TXNE F,PTF
TXNE F,SF
JRST RPRN1
MOVEM T,SYL
TXO F,QF!SF
JRST L1RPR
RPRN1: ADDB T,WRD
TXO F,QF
JRST L1A
SUBTTL COMMAND ROUTINES -- CLASS 5
;*************** START OF CLASS FIVE COMMANDS ***************
;CRLF AND OPEN NEXT REGISTER SUBROUTINE
LI0: PUSHJ P,TCRLF ;TYPE <CR><LF>
JRST LINEF0 ;JOIN COMMON CODE
;"^" COMMAND - CLOSE CURRENT AND OPEN PREVIOUS SEQUENTIAL LOCATION
VARRW: PUSHJ P,DEPRA ;^
PUSHJ P,TCRLF ;TYPE <CR><LF>
SOS T,LLOC ;DECREMENT CURRENT LOCATION COUNTER
JRST LI1 ;JOIN COMMON CODE
;<LF> COMMAND, CLOSE CURRENT AND OPEN NEXT SEQUENTIAL LOCATION
LINEF: PUSHJ P,DEPRA ;NEXT REGISTER
PUSHJ P,TCR ;DO CR ONLY
LINEF0: AOS T,LLOC ;BUMP LOC
LI1: MOVEM T,LLOC ;NEW LAST LOCATION
MOVEM T,LLOCO ;NEW LAST LOCATION OPEN
PUSHJ P,PADR ;PRINT AS ADDRESS
MOVEI T,"/" ;"/" TO INDICATE OPEN ADDRESS
CAME SCH,SCHM ;TEMP MODE SAME AS PERM?
JRST [CAIN SCH,FTOC ;NO, CONSTANT?
MOVEI T,"[" ;YES - INDICATE "[" MODE
CAIN SCH,PIN ;INSTRUCTION?
MOVEI T,"]" ;YES - INDICATE "]" MODE
JRST .+1] ;USE APPROPRIATE INDICATION
TXNE F,STF ;SUPPRESSING OUTPUT?
MOVEI T,"!" ;YES - THEN OVER-RIDE WITH "!" MODE
PUSHJ P,TOUT ;TELL USER WHAT IS HAPPENING
LI2: PUSHJ P,TTAB ;TYPE A <TAB>
TXO F,ROF ;MARK REGISTER OPEN
TXNE F,STF ;SUPPRESS TYPEOUT OF LOCATION?
POPJ P, ;YES, DONE
MOVE R,LLOCO ;GET ADDRESS OF OPEN LOC
MOVEI W1,"?" ;TYPE ? IF FETCH FAILS
PUSHJ P,FETCH ;FETCH CONTENTS
JRST TEXT ;CAN'T -- GO TYPE ?
PJRST CONSYM ;LIST CONTENTS OF OPEN LOC
;<CR> COMMAND - CLOSE CURRENT LOCATION
CARR: PUSHJ P,DEPRA ;CLOSE REGISTER
PUSHJ P,TIN ;GLOBBLE UP FOLLOWING LINEFEED
SETZM CHINP ;REINIT INPUT LINE
SETZM CHINC
MOVE T,LLOC ;GET CURRENT LOC
TXNE F,CF ; $ PRECEEDED?
JRST LI1 ;YES, GO OPEN REGISTER
JRST DD1.5 ;NO, JUST GO AWAIT COMMAND
SUBTTL COMMAND ROUTINES -- CLASS 6
;*************** START OF CLASS SIX COMMANDS ***************
SUBTTL COMMAND ROUTINES -- REGISTER DEPOSIT AND OPEN
;"\" COMMAND - OPEN NEW LOCATION, PRESERVING PC SEQUENCE
ICON: PUSHJ P,DEPRA ;BACKSLASH
PUSHJ P,CEFFAD ;COMPUTE EFF ADR
JRST ERR ;MEMORY READ ERROR
JRST SLASH4 ;JOIN COMMON CODE
;<TAB> COMMAND - OPEN NEW LOCATION, BREAKING PC SEQUENCE
TAB: PUSHJ P,DEPRA ;OPEN REGISTER OF Q
PUSHJ P,CEFFAD ;COMPUTE EFF ADR
JRST ERR ;MEMORY READ ERROR
SUBI T,1 ;CAUSE LI0 AOS'S LLOC
PUSHJ P,PSHLLC ;PUSH OLD SEQUENCE
MOVEM T,LLOC ;SETUP NEW SEQUENCE
JRST LI0 ;JOIN COMMON OPEN/TYPEOUT CODE
;"[" COMMAND - OPEN LOCATION IN CONSTANT TYPEOUT MODE
OCON: TXNE F,QF ;QUANT TYPED?
MOVEI SCH,FTOC ;YES, CHANGE TEMP MODE TO CONSTANT
TRO F,LF1+CF1 ;OPEN AS CONSTANT
JRST SLASH ;TYPE
;"]" COMMAND - OPEN LOCATION IN SYMBOLIC TYPEOUT MODE
OSYM: TXNE F,QF ;QUANT TYPED?
MOVEI SCH,PIN ;YES, CHANGE TEMP MODE TO INSTRUCTION
TRZ F,CF1 ;OPEN SYMBOLICALLY
TROA F,LF1 ; . . .
;SKIP/FALL INTO SLASH ROUTINE
;"!" COMMAND - OPEN LOCATION SUPPRESSING TYPEOUT OF CONTENTS
SUPTYO: TXOA F,STF ;SUPPRESS TYPEOUT
;SKIP/FALL INTO COMMON CODE
;"/" COMMAND - OPEN A NEW LOCATION IN CURRENT TYPEOUT MODE
SLASH: TXZ F,STF ;TYPE OUT NOT SUPPRESSED
PUSHJ P,CEFFAD ;COMPUTE EFF ADR
JRST ERR ;MEMORY READ ERROR
TXNN F,QF ;WAS ANY QUANTITY TYPED?
JRST SLASH4 ;NO. DO NOT CHANGE MAIN SEQUENCE
PUSHJ P,PSHLLC ;PUSH OLD SEQUENCE
MOVEM T,LLOC ;SETUP NEW SEQUENCE
SLASH4: MOVEM T,LLOCO ;SET NEW OPEN LOCATION
JRST LI2 ;AND GO HANDLE TYPEOUT
;CEFFAD - CALCULATE ADDRESS ARGUMENT FOR "/", "!", ETC.
;CALL IS:
;
; MOVX T,<ADDR-EXPR>
; PUSHJ P,CEFFAD
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <ADDR-EXPR> IS THE EXPLICITLY-TYPED ADDRESS EXPRESSION (IF
;ANY).
;
;BASICALLY ADDRESSING NOW WORKS AS FOLLOWS:
;
;IF AN EXPLICIT QUANTITY HAS NOT BEEN TYPED BY THE USER THEN
;THE LAST WORD TYPED IS USED AS THE BASIS FOR ADDRESS CALCU-
;LATION. IF THE DDT COMMAND (E.G., "/") WAS PREFIXED WITH A
;SINGLE <ESC> THEN THE FULL-WORD VALUE FROM ABOVE WILL BE TREA-
;TED AS AN INSTRUCTION-FORMAT-INDIRECT-WORD (IFIW) WHOSE EFFEC-
;TIVE ADDRESS "E" WILL BE CALCULATED AS IT WOULD BE BY THE HARD-
;WARE WERE IT TO EXECUTE THE WORD AS AN INSTRUCTION (ASSUMING
;A VALID OPCODE); IF THE DDT COMMAND IS PRECEDED WITH A DOUBLE
;<ESC> (E.G., $$/) THEN THE FULL WORD VALUE FROM ABOVE WILL BE
;TREATED AS AN EXTENDED-FORMAT-INDIRECT-WORD (EFIW) WHOSE EF-
;FECTIVE ADDRESS "E" WILL BE CALCULATED AS IT WOULD BE BY THE
;HARDWARE WERE IT TO ENCOUNTER THE WORD AS AN INDIRECTED WORD
;IN AN EFFECTIVE ADDRESS CALCULATION IN A NON-ZERO SECTION. IF
;NO <ESC>'S WERE TYPED THEN IF EITHER A SPACE WAS TYPED IN THE
;EXPLICIT ADDRESS EXPRESSION OR IF THE LAST WORD TYPED IS BEING
;USED (I.E., NO EXPLICIT ADDRESS WAS TYPED-IN) THEN THE HIGH-
;ORDER 18-BITS (I.E., THE "SECTION ADDRESS") OF THE 36-BIT
;ADDRESS-TO-BE-OPENED WILL BE SUPPLIED FROM THE CURRENTLY OPENED
;SECTION (I.E., THE LEFT HALF OF ".").
;
;IF A FETCH ERROR OCCURS OR ILLEGAL EFIW WORD FOUND THE ERROR
;RETURN IS TAKEN OTHERWISE THE SUCCESSFUL (SKIP) RETURN IS TAKEN
;WITH THE 36-BIT GLOBAL ADDRESS IN REGISTER T.
;
;USES ACS R, S, W.
CEFFAD: TXNN F,QF ;EXPLICIT ADDRESS EXPRESSION TYPED?
MOVE T,LWT ;NO, USE LAST WORD TYPED
TXNE F,CCF ;DOUBLE <ESC> TYPED?
JRST CEFFE ;YES, EFIW ADDRESS CALCULATION
TXNE F,CF ;SINGLE <ESC> TYPED?
JRST CEFFI ;YES, IFIW ADDRESS CALCULATION
TXNE F,QF ;IMPLICIT ADDRESS BEING USED, OR
TXNE F,SPF ;SPACE TYPED IN EXPLICIT ADR EXPR?
TLZA T,-1 ;YES, SECTION RELATIVE ADDRESS
JRST CPOPJ1 ;RETURN WITH GLOBAL ADDRESS IN T
CAILE T,17 ;LOCAL REFERENCE TO A REGISTER?
HLL T,LLOCO ;NO, MEMORY, RELOCATE INTO LOCAL SECTION
JRST CPOPJ1 ;RETURN WITH GLOBAL ADDRESS IN T
;SETUP TO CALCULATE IFIW EFFECTIVE ADDRESS
CEFFI: HLLZ S,LLOCO ;PRELOAD (FAKE) CURRENT SECTION
CEFFIX: MOVEI W,INDPTH ;MAX LOOP COUNT FOR INDIRECTION
MOVEM W,TEM ;SO WE DON'T GET CAUGHT
;CALCULATE IFIW
CIFIW: PUSH P,T ;SAVE FOR LATER INDIRECTION CHECK
MOVEM T,LASEAF ;ALSO SAVE FOR JRSTF BITS IN $X
HRRZ W,T ;IFIW: Y FIELD (18 BITS)
LDB R,[POINT 4,T,17];IFIW: X FIELD
HLL T,S ;GLOBAL ADR IN CASE ONLY INDIRECTION
JUMPE R,CIFIW6 ;SKIP INDEXING IF NO INDEX REGISTER
;DO IFIW INDEXING
MOVE T,AC0(R) ;FETCH THE INDEX REGISTER
MOVEM T,LASEAF ;SAVE FOR JRSTF BITS IN $X
MOVE R,T ;SCRATCH COPY
JUMPE S,CIFIW2 ;IF SECTION 0 INDEX
JUMPL R,CIFIW2 ;OR LH(X) .LT. 0
TLNN R,-1 ;OR LH(X) .EQ. 0
CIFIW2: TLZA T,-1 ;THEN ONLY 18-BITS OF INDEXING
HRRE W,W ;ELSE SIGN-EXTEND Y TO 36-BITS
ADD T,W ;DO THE INDEXING
JUMPE S,CIFIW4 ;IF SECTION 0
JUMPL R,CIFIW4 ;OR LH(X) .LT. 0
TLNN R,-1 ;OR LH(X) .EQ. 0
CIFIW4: HLL T,S ;THEN E STAYS IN LOCAL SECTION
TLZ T,770000 ;LEAVE ONLY EFIW Y FIELD
HLLZ S,T ;UPDATE S TO NEW CURRENT SECTION
;CHECK IFIW INDIRECTION
CIFIW6: TXNN T,777760 ;IS LOCAL REFERENCE TO A REGISTER?
ANDI T,17 ;YES, REDUCE TO UNABIGUOUS AC
; (NOTE "SECTION-NESS" STILL IN S)
POP P,R ;GET BACK ORIGINAL WORD
TXNN R,@ ;IFIW I BIT ON?
JRST CPOPJ1 ;NO, ALL DONE
CIFIW8: MOVE R,T ;YES, ADDRESS OF NEW ADDRESS
PUSHJ P,FETCH ;GO GET INDIRECTED WORD
POPJ P, ;CAN'T ACCESS WORD, DIE
SOSG TEM ;INFINITE LOOP?
POPJ P, ;APPARENTLY, GO COMPLAIN AT USER
CIFIW9: JUMPE S,CIFIW ;ONCE IN SECTION 0, ALWAYS IN SECTION 0
JUMPG T,CEFIW ;IF BIT 0 .EQ. 0 THEN EFIW
TXNN T,1B1 ;BIT 0 AND BIT 1 ON?
JRST CIFIW ;JUST BIT 0, IFIW FORMAT
POPJ P, ;ILLEGAL COMBINATION
;SETUP TO CALCULATE EFIW EFFECTIVE ADDRESS
CEFFE: HLLZ S,LLOCO ;PRE-LOAD CURRENT SECTION
MOVEI W,INDPTH ;MAX LOOP COUNT FOR INDIRECTION
MOVEM W,TEM ;SO WE DON'T GET CAUGHT
JRST CIFIW9 ;DISPATCH ON TYPE OF INDIRECTION
;EFIW FORMAT
CEFIW: PUSH P,T ;SAVE FOR LATER INDIRECTION CHECK
LDB W,[POINT 30,T,35] ;EFIW: Y FIELD (30 BITS)
LDB R,[POINT 4,T,5] ;EFIW: X FIELD
TLZ T,770000 ;IN CASE ONLY INDIRECTION
JUMPE R,CEFIW6 ;SKIP INDEXING IF NO INDEX REGISTER
;DO EFIW INDEXING
MOVE T,AC0(R) ;GET INDEX REGISTER
ADD T,W ;INDEX THE Y FIELD
TLZ T,770000 ;LEAVE ONLY Y FIELD
;CHECK EFIW INDIRECTION
CEFIW6: POP P,R ;GET BACK ORIGINAL WORD
TXNN R,1B1 ;EFIW I BIT ON?
JRST CPOPJ1 ;NO, ALL DONE
HLLZ S,T ;YES, SET NEW CURRENT SECTION
JRST CIFIW8 ;AND LOOP ON INDIRECTION
;HERE WHEN REGISTER CLOSED TO DEPOSIT NEW CONTENTS AND SET NEXT LOCATION
DEPRA: TXNE F,CF ;$ PRECEEDED?
PUSHJ P,POPLLC ;YES, POP OLD SEQUENCE
TXNE F,ROF ;IF REGISTER IS BEING CHANGED
TXNN F,QF ;REMOVE ALL PREVIOUS UNDEFINED
JRST DEPRS ;SYMBOL REFERENCES TO IT
MOVE R,@USYMP ;GET POINTER TO ALL OLD UNDEF ITEMS
MOVEM W1,@USYMP ;INCLUDE THE NEW ITEMS IN UNDEF LIST
MOVEM R,ESTUT ;FAKE OUT USYSET
IFN FTFILE,<
SKIPN FILING ;SEE IF /M
JRST DEPRS ;YES--NO UNDEF FIXUPS
>
MOVEM T,LWT ;SAVE T IN LWT, DEPRS DOES IT ANYWAY
DEPRA1: PUSHJ P,USYSET ;SETUP TO SEARCH UNDEFINEDS
ADDI R,1 ;WANT VALUE WORDS THIS TIME
DEPRA2: SOSGE R ;ANY MORE SYMBOLS?
PUSHJ P,ADVSYM ;MAYBE, MAKE SURE
SKIPA W,@SYPTR ;YES, GET VALUE WORD
JRST DEPRA6 ;ALL DONE, GO DO THE STORE
JUMPG W,DPRS3 ;1B0=0 IMPLIES CHAINING
HRRZ T,W ;GET ADDRESS OF FIXUP
SKIPE T ;DELETE ENTRY IF ADR=0, OR
CAMN T,LLOCO ; IF ADR IS BEING CHANGED
SKIPA W1,R2IDX ;WANT TO DELETE IT, FORM SYM INDEX
SOJA R,DEPRA2 ;KEEP IT, GET NEXT VALUE
ADD W1,R ;SYM INDEX NOW IN W1
SUBI W1,1 ;POINT TO 1ST WORD OF SYMBOL PAIR
PUSHJ P,REMUN ;GET RID OF THE SYMBOL
JRST DEPRA6 ;CAN'T, SKIP ALL THIS
JRST DEPRA1 ;RESTART, SINCE REMUN CALLED SYWSET
DEPRA6: MOVE T,LWT ;RESTORE QUANTITY
JRST DEPRS ;DO THE STORE
;HERE IF THE UNDEFINED SYMBOL REQUESTS A CHAINED FIXUP.
DPRS3: PUSH P,R ;SAVE R OVER ALL THIS
SETO S, ;FLAG TO USE DEPSYM
DPRS4: HRRZ R,W ;GET NEXT ADR (AFTER ADR IN W1)
JUMPE R,DEPRA8 ;STOP ON 0 ADR
PUSHJ P,FETCHL ;GET CONTENTS OF ADR IN R
JRST DEPRA8 ;****UNDEFINED SYMBOL TABLE OR FIXUP
; CHAIN POINTS TO ILL. MEM. TRY
; TO CONTINUE.
EXCH T,W
EXCH W1,R
CAME W1,LLOCO ;IS THIS WORD BEING CHANGED?
JRST DPRS4 ;NO, CONTINUE SEARCHING LIST
HRR T,W ;PATCH CHAIN ADR AROUND ITEM
AOSE S ;SEE IF NEED TO USE DSYMER
TDZA TT1,TT1 ;NO--USE DMEMER
MOVEI TT1,DSYMER-DMEMER ;YES.
PUSHJ P,DMEMER(TT1) ;CALL EITHER DMEMER OR DSYMER
JRST DPRS4 ;CONTINUE DOWN CHAIN
DEPRA8:
IFN FTEXEC,<
PUSHJ P,SYMSPC ;MAKE SURE AFTER FETCHL AND DMEMER
> ;END IFN FTEXEC
POP P,R ;RESTORE R
SOJA R,DEPRA2 ;GET NEXT SYMBOL
;ROUTINES TO HANDLE RING BUFFER OF LOCATIONS
;'PUSH' CURRENT LOCATION
PSHLLC: AOS TT,SAVLP ;BUMP POINTER
CAIL TT,NSAVTB ;AT END OF TABLE?
SETZB TT,SAVLP ;YES, WRAPAROUND
PUSH P,LLOC ;GET CURRENT LOCATION
POP P,SAVLTB(TT) ;ADD IT TO TABLE
POPJ P,
;'POP' CURRENT LOCATION
POPLLC: MOVE TT,SAVLP ;GET POINTER
MOVE TT,SAVLTB(TT) ;REMOVE FROM TABLE
MOVEM TT,LLOC ;SET AS CURRENT LOC
SOS TT,SAVLP ;DECREMENT PTR
JUMPGE TT,POPLC1 ;AT TOP OF TABLE?
MOVEI TT,NSAVTB-1 ;YES, WRAPAROUND
MOVEM TT,SAVLP
POPLC1: POPJ P,
SUBTTL COMMAND ROUTINES -- RETYPE LAST QUANTITY
SEMIC: MOVEM T,LWT ;SEMICOLON TYPES IN CURRENT MODE
JRST (SCH)
EQUAL: TROA F,LF1+CF1 ;=
UNDRL: TRZ F,CF1 ;_
TRO F,LF1
PUSHJ P,CONSYM
JRST RET
SUBTTL COMMAND ROUTINES -- TYPEOUT MODE CONTROL
TEXO: TXNN F,Q2F ;$NT?
MOVEI R,TEXTT-HLFW ;$T ASSUME 7 BIT ASCII
MOVE T,WRD2D ;GET "RADIX" OF TEXT
CAIN T,9 ;CHECK FOR $9T
MOVEI R,TEXT9T-HLFW ;SET MODE FOR NINE-BIT ASCII
CAIN T,8 ;CHECK FOR $8T
MOVEI R,TEXT8T-HLFW ;SET MODE FOR EIGHT-BIT ASCII
CAIN T,7 ;CHECK FOR $7T
MOVEI R,TEXTT-HLFW ;SET MODE FOR SEVEN-BIT ASCII
CAIN T,6 ;CHECK FOR $6T
MOVEI R,SIXBP-HLFW ;SET MODE SWITCH FOR SIXBIT ASCII
CAIN T,5 ;CHECK FOR $5T
MOVEI R,R50PNT-HLFW ;SET MODE SWITCH FOR RADIX 50
JUMPE R,ERR ;ERROR IF NOT A KNOWN TEXT "RADIX"
HWRDS: ADDI R,HLFW-TFLOT ;H
SFLOT: ADDI R,TFLOT-PIN ;F
SYMBOL: ADDI R,PIN-FTOC ;S
CON: ADDI R,FTOC ;C
HRRZM R,SCH
JRST BASE1
RELA: TRZE F,Q2F ;CHANGE ADDRESS MODE TO RELATIVE
JRST BASECH
MOVEI R,PADSO-TOC
ABSA: ADDI R,TOC ;A
HRRZM R,AR
JRST BASE1S
BASECH: MOVE T,WRD2D ;$NR CHANGE OUTPUT RADIX TO N, N .GT. 1
CAIGE T,2
JRST ERR
HRRZM T,ODF
BASE1: SKIPE S,OLDAR
MOVE AR,S
BASE1S: SETZM OLDAR
BASE1O: MOVS S,[XWD SCHM,SCH]
TXNN F,CCF
JRST LIS1
BLT S,ODFM ;WITH $$, MAKE MODES PERMANENT
MOVE S,[SVBTS,,PSVBTS]
BLT S,PSVBTS+1
JRST RET
;BYTE COMMAND AND TYPEOUT ROUTINES
BITO: TRZN F,Q2F ;DOES <N> EXIST FOR $<N>O?
JRST BITO5 ;NO, DEFAULT TO CURRENT MASK
SETZB W2,SVBTS ;MAKE ROOM FOR A NEW MASK
MOVEI W1,1 ;PROTOTYPE BIT
MOVN T,WRD2D ;FOR SHIFTING THE PROTOTYPE BIT
BITO2: LSHC W1,(T) ;POSITION TO A BYTE BOUNDRY
IORM W2,SVBTS ;MARK NEXT BYTE BOUNDRY
JUMPN W2,BITO2 ;LOOP FOR ALL BYTES
BITO5: SKIPN OLDAR ;GOT A SAVED AR ALREADY?
MOVEM AR,OLDAR ;NO, THEN SAVE THE CURRENT ONE
MOVEI AR,TOC ;SET OCTAL TYPEOUT BY DEFAULT
MOVEI SCH,BITT ;AND BYTE TYPEOUT
PJRST BASE1O ;HANDLE $$ IF NEED BE . . .
;HERE FOR ACTUAL BYTE TYPEOUT
BITT: PUSH P,LWT ;SAVE LAST WORD TYPED . . .
SKIPN T,SVBTS ;GET CURRENTLY PREVAILING $O MASK
MOVE T,BYTMSK ;BLANK, USE $3M MASK INSTEAD
IORI T,1B35 ;BIT 35 ALWAYS MARKS END OF A BYTE
PUSH P,T ;SET WORKING COPY OF MASK
PUSH P,LWT ;WORKING COPY OF WORD TO BE TYPED
JRST BITT4 ;ENTER LOOP
BITT2: MOVEI T,"," ;SEPARATE BYTES WITH A COMMA
PUSHJ P,TOUT ;TYPE IT OUT
BITT4: POP P,T ;[REMNANTS OF] WORD TO BE TYPED
POP P,W1 ;[REMNANTS OF] BYTE MASK
JFFO W1,.+3 ;GET NEXT COUNT OF BITS
POP P,LWT ;DONE, RESTORE LWT FOR OTHERS
POPJ P, ;RETURN
LSH W1,1(W2) ;UPDATE MASK
PUSH P,W1 ;SAVE AWAY FOR NEXT ROUND
LSHC T,-^D36+1(W2) ;GET NEXT BYTE TO BE TYPED
MOVEM T,LWT ;SET IN COMMON STORAGE PLACE
PUSH P,W1 ;SAVE REMAINING BYTES FOR NEXT ROUND
CAIN AR,TOC ;NUMERIC OUTPUT?
PUSHJ P,TOCA ;YES, OUTPUT ACCORDINGLY
CAIN AR,PADSO ;SYMBOLIC OUTPUT?
PUSHJ P,PIN ;YES, OUTPUT ACCORDINGLY
SKIPE -1(P) ;MORE BYTES COMING UP?
JRST BITT2 ;YES, TYPE A COMMA
JRST BITT4 ;NO, CLEAN UP STACK AND LEAVE
SUBTTL COMMAND ROUTINES -- LIMITS AND PATCHING
FIRARG: TXNE F,CF!CCF ;$ PRECEEDED?
JRST PTCH ;YES, PATCH COMMAND
MOVEM T,LLIMIT ;NO, SET FIRST ARG
TXO F,FAF
JRST ULIM1
ULIM: TXNE F,CCF ;$$ PRECEEDED?
JRST ERR ;YES, NO SUCH COMMAND
TXNE F,CF!CCF ;$ PRECEEDED?
JRST PTCHE ;YES, PATCH END COMMAND
TXO F,SAF ;NO, SET SECOND ARG
MOVEM T,ULIMIT
ULIM1: TXNN F,QF
JRST ERR
JRST LIS0E ;[242]
;HERE FOR THE PATCH BEGIN COMMAND
PTCH: TXNN F,ROF ;NO REGISTER OPEN?
JRST ERR ;YES, ERROR
SETZM PTORG ;ASSUME EXPRESSION TYPED
TXNE F,TIF!COMF!PTF!MF ;EXPRESSION TYPED?
JRST PTCH2 ;YES, JUST GO USE IT
TXNE F,QF ;ANYTHING AT ALL TYPED?
TXNE F,LTF ;NUMBER OR SYMBOL?
CAIA ;NOTHING OR SYMBOL TYPED
JRST PTCH2 ;NUMBER, JUST GO USE IT
TXNE F,QF ;ANYTHING TYPED?
JRST [PUSHJ P,EVAL ;YES, LOOKUP SYMBOL
JRST ERR ;STRANGE TYPEIN, LOSE
JRST PTCH4] ;FOUND, USE VALUE AS PATCH LOC
MOVSI W,-NPSYM ;SETUP TO SCAN PATCH SYMBOLS
PTCH1: MOVE T,PCHSYM(W) ;GET A POSSIBLITY
MOVEM T,SYM ;SET IT UP FOR EVAL
PUSHJ P,EVAL ;TRY TO FIND VALUE
AOBJN W,PTCH1 ;NOT FOUND, TRY NEXT SYMBOL
JUMPL W,PTCH4 ;FOUND A SYMBOL, USE IT
IFN FTEXEC,<SKPUSR ;USER MODE?
JRST ERR> ;EXEC MODE LOSES HERE
MOVEI R,.JBFF ;NONE OF THE SYMBOLS EXIST, USE .JBFF
PUSHJ P,FETCH ;GET CONTENTS OF .JBFF
JRST ERR ;USER LOSES
AOS PTORG ;PTORG = 1 TO FLAG FROM .JBFF
JRST PTCH2 ;FAKE PATCH SYMBOL FOUND
PTCH4: SETOM PTORG ;PTORG = -1 TO FLAG A SYMBOL
MOVE R,SYM ;GET SYMBOL BEING USED
MOVEM R,PTSYM ;SAVE FOR CLOSING PATCH LATER
AOS R,W1 ;POINT TO VALUE WORD
PTCH2: CAIGE T,.JBDA ;HAVE REASONABLE PATCH ADDRESS?
JRST ERR ;NO
TLNN T,-1 ;SYMBOL HAVE 0 LH?
JRST PTCH6 ;YES, ASSUME OK
XOR T,LLOCO ;CHECK SECTION NUMBER
TLNE T,-1 ;PATCH IN SAME SECTION AS OPEN LOC?
JRST ERR ;NO, DIE (JUMPA ONLY HAS 18-BITS OF ADR)
XOR T,LLOCO ;RESTORE T (ADDRESS)
PTCH6: MOVEM T,PTLOC ;YES, SAVE IT
MOVEM R,PTFIX ;SAVE WHERE IT CAME FROM
MOVE R,LLOCO ;LOC OF OPEN REGISTER
MOVEM R,PTLLC ;SAVE IT
PUSHJ P,FETCH ;GET CONTENTS
JRST ERR ;FETCH FAILED
MOVEM T,PTWRD ;SAVE ORIGINAL WORD
PUSHJ P,DMEMER ;BE SURE IT CAN BE CHANGED, ERR IF NOT
SETZM PTAFTR ;ASSUME PATCH BEFORE
TXNE F,CCF ;SAVE BEFORE/AFTER FLAG
SETOM PTAFTR ;0 MEANS BEFORE, -1 MEANS AFTER
PUSHJ P,TCRLF ;OUTPUT <CR><LF>
MOVE T,PTLOC ;START OF PATCHING AREA
PUSHJ P,LI1 ;OPEN LOCATION AND TYPEOUT
SKIPL PTAFTR ;PATCH BEFORE OR AFTER?
POPJ P, ;BEFORE, DONE FOR NOW
MOVE R,LLOCO ;CURRENT OPEN LOCATION
MOVE T,PTWRD ;ORIGINAL INSTRUCTION
PUSHJ P,DMEMER ;PUT AS FIRST IN PATCH AREA
PUSHJ P,LI2 ;NOW TYPE OUT SO USER CAN SEE
PJRST LI0 ;AND OPEN/TYPE NEXT LOCATION
;TABLE OF SYMBOLS IDENTIFYING PATCH AREAS
PCHSYM:
IFN FTDEC10&FTEXEC,<RADIX50 0,PAT> ;TOPS-10 MONITOR PATCH AREA
IFN FTEX20!FTMON,<RADIX50 0,FFF> ;TOPS-20 MONITOR PATCH AREA
RADIX50 0,PAT.. ;USUAL LINK SYMBOL
RADIX50 0,PATCH ;ANOTHER LIKELY POSSIBILITY
IFE FTDEC10!FTEXEC,<RADIX50 0,PAT> ;LOOK LAST IF NOT -10 EDDT
NPSYM==.-PCHSYM
;HERE FOR THE PATCH END COMMAND
PTCHE: SKIPN PTLOC ;PATCH IN PROGRESS?
JRST ERR ;NO, ERROR
TXZ F,CF!CCF ;FLUSH FLAGS BEFORE DEPRA
TXZN F,STF ;DID USER SEE LAST LOC? (CLEAR FLAG FOR LI0)
SKIPE LWT ;AND WAS IT ZERO?
JRST PTCHE0 ;NO, PROCEED
TXNE F,ROF ;REGISTER OPEN?
TXNE F,QF ;AND NOTHING YET TYPED?
JRST PTCHE0 ;NO.
SOS LLOC ;YES - DO NOT STORE A 0 WORD.
PTCHE0: PUSHJ P,DEPRA ;STORE LAST WORD IF ANY
SKIPGE PTAFTR ;PATCH BEFORE?
JRST PTCHE1 ;NO
PUSHJ P,LI0 ;OPEN AND TYPE NEXT LOCATION
MOVE R,LLOCO ;CURRENT OPEN LOCATION
MOVE T,PTWRD ;USER ORIGINAL INSTRUCTION
PUSHJ P,DMEMER ;PUT AT END OF PATCH CODE
PUSHJ P,LI2 ;AND TYPE OUT FOR USER TO SEE
PTCHE1: PUSHJ P,LI0 ;OPEN AND TYPE NEXT LOCATION
MOVE R,LLOCO ;CURRENT OPEN LOCATION
HRRZ T,PTLLC ;ORIGINAL USER LOCATION
ADD T,[JUMPA 1,1] ;NON-SKIP CONTINUE/RETURN
PUSHJ P,DMEMER ;PUT IN PATCH AREA
PUSHJ P,LI2 ;KEEP USER UPDATED
PUSHJ P,LI0 ;ADVANCE TO NEXT LOCATION
MOVE R,LLOCO ;CURRENT OPEN LOCATION
HRRZ T,PTLLC ;ORIGINAL USER LOCATION
ADD T,[JUMPA 2,2] ;SKIP CONTINUE/RETURN INSTRUCTION
PUSHJ P,DMEMER ;PUT IN PATCH AREA
PUSHJ P,LI2 ;AND TELL USER
;CONTINUED ON NEXT PAGE
;FALL IN FROM ABOVE
;NOW TO DECIDE WHAT POINTER (IF ANY) TO UPDATE
SKIPN PTORG ;ANYTHING TO UPDATE?
JRST PTCHE4 ;NO, GO INSTALL JUMPA TO PATCH
AOS T,LLOC ;GET NEXT FREE PATCH LOC
SKIPG PTORG ;SYMBOL OR .JBFF?
JRST PTCHE3 ;SYMBOL, PROCEED
MOVEI R,.JBFF ;.JBFF, SET UP TO UPDATE IT
PUSH P,T ;SAVE T
PUSHJ P,DMEMER ;UPDATE C(.JBFF) ACCORDINGLY
MOVEI R,.JBSA ;C(.JBFF) ALSO STORED IN LH(.JBSA)
PUSHJ P,FETCH ;SO GET .JBSA
JRST ERR ;BZZZT?
HRL T,(P) ;NEW LH(.JBSA)
PUSHJ P,DMEMER ;SET AND HOPE FOR BEST
POP P,T ;RESTORE STACK
JRST PTCHE4 ;AND FINISH OFF PATCH
PTCHE3: MOVE R,PTFIX ;WHERE VALUE CAME FROM
PUSHJ P,DSYMER ;DEPOSIT NEW SYMBOL VALUE
MOVE S,PTSYM ;GET SYMBOL USED FOR PATCHING
PUSHJ P,DELCSH ;REMOVE FROM THE SYMBOL TABLE CACHE
MOVE S,T ;GET VALUE SYMBOL WAS REDEFINED AS
PUSHJ P,DELCSV ;REMOVE VALUE FROM CACHE TOO
PTCHE4: PUSHJ P,TCRLF ;TYPE <CR><LF>
MOVE T,PTLLC ;ORIGINAL USER LOCATION
PUSHJ P,LI1 ;OPEN AND TYPE ORIGINAL LOCATION
MOVE R,LLOCO ;CURRENT OPEN LOCATION
MOVSI T,(JUMPA) ;JUMP TO PATCH AREA INSTRUCTION
HRR T,PTLOC ;ADDRESS OF START OF PATCH
; NOTE ADDRESS IN LOCAL SECTION
PUSHJ P,DMEMER ;PUT IN JUMP INSTRUCTION
PUSHJ P,LI2 ;AND SHOW USER
SETZM PTLOC ;SAY NO PATCH IN PROGRESS
POPJ P, ;DONE
SUBTTL COMMAND ROUTINES -- MEMORY AND PAGING CONTROL
;HERE ON AN $W OR $$W.
;
;IF FORM WAS "LOWER<UPPER>WORD$W" THEN IS WORD SEARCH, OTHERWISE
;COMMAND IS TO ENABLE MEMORY-MANAGEMENT FLAGS.
;
;A SINGLE <ESC> ENABLES THE CONDITION, A DOUBLE <ESC> CLEARS IT:
;
; $[$]0W ;ENABLE [DISABLE] AUTO WRITE-ENABLE
; $[$]1W ;ENABLE [DISABLE] AUTO PAGE CREATE
DBLU: TXNE F,QF ;USER TYPE AN ARG?
JRST WORD ;YES, THIS IS A WORD SEARCH
IFN FTFILE,<
SKIPN PHYSIO ;ARE WE EXAMINING A REAL DISK FILE?
SKIPN FILING ;MAYBE, ARE WE?
CAIA ;NO
JRST ERR ;YES, CAN'T CHANGE PATCHS WITHOUT
; RE-OPENING THE FILE
> ;END IFN FTFILE
TXNE F,CCF ;$$W?
TDZA T,T ;YES, CLEAR FLAG
SETO T, ;NO, SET FLAG
TXNE F,Q2F ;USER TYPE SECOND ARG?
SKIPA R,WRD2D ;YES, GET INDEX
SETZ R, ;NO, DEFAULT IS 0 (WRITE ENABLE)
JUMPL R,ERR ;MUST BE .GE. 0
CAIL R,PAMAX ;AND .LT. PAMAX
JRST ERR ;NOT IN RANGE, CALL ERROR
MOVEM T,PATCHS(R) ;STORE NEW WRITE-ENABLE WORD
IFN FTFILE,<SETOM DEPNCT> ;RESET PATCHING TRIED FLAG
JRST RET
;COMMAND TO MAKE LIFE EASIER ON VIRTUAL ADDRESSING MACHINES
;FORMAT IS ARG$NU, WHERE N IS:
;
; BLANK SAME AS 0
; 0 MAP THROUGH EPT AT PAGE ARG (ON -10, CAN BE UPT<EPT$U)
; 1 MAP THROUGH UPT AT PAGE ARG
; 2 MAP THROUGH SECTION MAP AT PAGE ARG
; 3 FAKEAC FLAG: NON-ZERO TO USE FAKE ACS
; 4 SET AC BLOCK TO ARG (EDDT ONLY)
; 5 LOAD ACS FROM 20 WORD BLOCK AT ARG
; 6 SET SPT BASE TO ARG
; 7 SET CST BASE TO ARG
; 8 SET ADDRESS RELOCATION (ADDED TO ALL USER ADDRESSES)
; 9 SET ADDRESS PROTECTION (MAX LEGAL USER ADDRESS)
; 10 SET KI-PAGING MODE (FOR EMULATION, IGNORED IN EDDT)
; 11 SET KL-PAGING MODE (FOR EMULATION, IGNORED IN EDDT)
;
;(MATCH ANGLE BRACKETS:>)
;
;FOR MAPPING FUNCTIONS, TWO ALTS MEANS ARG IS AN SPT INDEX INSTEAD OF
;A PAGE NUMBER.
;
;$U WITH NO ARGUMENTS CLEARS 0,1,2,8 ANDS SETS 3 (I.E., RESTORES "NORMAL
;VIRTUAL ADDRESSING"). $$U WITH NO ARGUMENTS SET PHYSICAL ADDRESSING
;MODE.
;
;$NU OR $$NU WILL RETURN THE ADDRESS OF THE APPROPRIATE WORD INTERNAL
;TO DDT WHICH CORRESPONDS TO THE FUNCTION. FOR FUNCTIONS 0, 1, AND 2
;THE $$ FORM RETURNS THE MAPPING FUNCTION WORD (I.E., PHYSICAL OR
;VIRTUAL OR SPT-RELATIVE ADDRESSING) WHILE THE $ FORM RETURNS THE
;USER ARGUMENT. FOR ALL OTHER FUNCTION CODES AN ERROR OCCURS.
SETPAG: TXNE F,QF ;ANY ARG?
JRST SETPA2 ;YES, A FUNCTION TO PERFORM
TXNE F,Q2F ;WANT TO READ BACK?
IFE FTFILE,<JRST SETPA4> ;YES, CONCOCT A DDT ADDRESS
IFN FTFILE,<JRST ERR> ;YES, ILLEGAL
TXNE F,FAF!SAF ;$U OR $$U, ANY SUPERFLUOUS ARGS?
JRST ERR ;YES, ILLEGAL
TXNE F,CCF ;$U OR $$U?
JRST SETPHY ;$$U, SET PHYSICAL ADDRESSING
SETZM MAPFN ;UNMAPPED VIRTUAL ADDRESSING
IFN FTFILE,< ;SPECIAL FILDDT DEFAULTING
SETZM FAKEAC ;UNMAPPED 0-17 ALSO, UNLESS
SKIPN PHYSIO ;IF DOING SUPER I/O
SKIPN EXEFMT ;OR IF LOOKING AT A DATA FILE
SKIPA ;DO NOT USE FAKE ACS
> ;END OF IFN FTFILE
SETOM FAKEAC ;ASSUME BACK TO INTERNAL FAKE ACS
POPJ P, ;THAT'S IT
;HERE ON AN $U WITH AN ARGUMENT. FIGURE OUT WHICH FUNCTION TO PERFORM.
SETPA2: TXNN F,Q2F ;ANY FUNCTION CODE?
TDZA W,W ;NO, ASSUME 0
MOVE W,WRD2D ;YES, GET IT (DECIMAL)
JUMPL W,ERR ;NEGATIVE IS ILLEGAL
CAIL W,PFNMAX ;TOO BIG?
JRST ERR ;ILLEGAL
HLLO TT,F ;FLAGS,,-1
AND TT,PFNDSP(W) ;CHECK FOR ILLEGAL FLAGS
SKPKLP ;KI PAGING?
TXNN F,CCF ;YES, $$ ALWAYS ILLEGAL. WAS IT TYPED?
TLNE TT,-1 ;OR ANY ILLEGAL FLAGS SET?
JRST ERR ;YES, ILLEGAL
ADDI W,1 ;BASE FUNCTIONS AT 1 FOR STORE
JRST 0(TT) ;DISPATCH
;HERE TO RETURN ADDRESS OF DDT WORD FOR USER TO SEE
IFE FTFILE,<
SETPA4: SKIPL W,WRD2D ;GET FUNCTION CODE
CAIL W,PFNMAX ;TOO BIG?
JRST ERR ;ILLEGAL
TXNN F,CCF ;$ OR $$ TYPED?
SKIPA T,PFNADR(W) ;$NU
MOVS T,PFNADR(W) ;$$NU
TRNN T,-1 ;SOMETHING THERE?
JRST ERR ;NO, USER ERROR
; HLL T,SECDDT ;CONCOCT AN INTERNAL-TO-DDT ADDRESS
; PJRST MASK2 ;AND RETURN VALUE AS IF USER TYPED IT
;***; TEMP CODE TILL DDT CAN DISTINGUISH THIS TYPE OF SPECIAL ADDRESS
PUSH P,(T) ;***;SAVE VALUE
MOVEI W1,[ASCIZ\/ \] ;***;SEPARATING TEXT
PUSHJ P,TSTRG ;***;TYPE OUT SEPARATOR
POP P,T ;***;GET THE VALUE BACK
PUSHJ P,CONSYM ;***;AND DISPLAY IT FOR THE USER
PJRST TCRLF ;***;AND CAP OFF LINE SO USER NOT TEMPTED TO
;***; TYPE IN A NEW VALUE, <CR><LF>
> ;END IFE FTFILE
;DISPATCH TABLE FOR $U FUNCTION CODES.
;FORMAT IS: ILLEGAL FLAG BITS,,DISPATCH ADDRESS
;CHANGES HERE SHOULD ALSO GO IN MFNDSP AND COMMENT ON PREVIOUS PAGE.
PFNDSP: SAF+ SETEPT ;(00) SET EPT
FAF!SAF+ SETMAP ;(01) SET UPT
FAF!SAF+ SETSEC ;(02) SET SECTION MAP
FAF!SAF!CCF+ SETFAC ;(03) SET FAKE ACS
FAF!SAF!CCF+ SETACB ;(04) SET AC BLOCK
FAF!SAF!CCF+ SETCAC ;(05) LOAD "CRASH ACS" FROM ADDRESS
FAF!SAF!CCF+ SETSPT ;(06) SET SPT BASE
FAF!SAF!CCF+ SETCST ;(07) SET CST BASE
FAF!SAF!CCF+ SETREL ;(08) SET RELOCATION
FAF!SAF!CCF+ SETPRT ;(09) SET PROTECTION
FAF!SAF!CCF+ SETKIP ;(10) SET KI-PAGING EMULATION
FAF!SAF!CCF+ SETKLP ;(11) SET KL-PAGING EMULATION
PFNMAX==.-PFNDSP
PFNADR: MAPFN,, MAPPG ;(00) SET EPT (ADDRESSING MODE)
MAPFN,, MAPPG ;(01) SET UPT (ADDRESSING MODE)
MAPFN,, MAPPG ;(02) SET SECTION MAP (ADDRESSING MODE)
0,, FAKEAC ;(03) SELECT INTERNAL FAKE ACS
0,, ACWRD ;(04) SELECT HARDWARE AC BLOCK
0,, FAKEAD ;(05) ADDRESS OF ORIGIN OF FAKE ACS
0,, SPTWRD ;(06) BASE ADDRESS OF SPT
0,, CSTWRD ;(07) BASE ADDRESS OF CST
0,, UBASE ;(08) RELOCATION ADDRESS
0,, UPROT ;(09) PROTECTION ADDRESS
0,, KIPAG ;(10) KI-PAGING FLAG
0,, KLPAG ;(11) KL-PAGING FLAG
;SET PHYSICAL ADDRESSING
SETPHY: SETZM FAKEAC ;USE REAL 0-17
SETO W, ;-1 IN MAPFN MEANS PHYSICAL ADDRESSING
JRST SETMA4 ;JOIN COMMON CODE
;SET EPT (AND POSSIBLY UPT FOR PER-PROCESS AREA IF KI PAGING)
SETEPT: SKPKIP ;KI PAGING?
JRST SETMAP ;NO, JUST LIKE UPT
TXNE F,FAF ;USER GIVE UPT?
SKIPA TT,LLIMIT ;YES, USE IT
SETO TT, ;NO, -1 MEANS PER-PROCESS AREA INACCESSIBLE
HRL T,TT ;STORE USER,,EXEC IN MAPPG
JRST SETMA2 ;JOIN COMMON CODE
;SET SECTION MAP
SETSEC: SKPKLP ;ONLY LEGAL IF KL PAGING
JRST ERR ;OTHERWISE FORGET IT
;SET ANY MAP-THE-ADDRESS-SPACE FUNCTION. $U FUNCTION CODE IS STILL IN W.
SETMAP: TXNE F,FAF ;EXTRA ARG?
JRST ERR ;YES, COMPLAIN
SETMA2: TXNE F,CCF ;TWO ALTS?
TXO W,1B1 ;YES, 1B1 MEANS FETCH SPT INDEX
SETOM FAKEAC ;USE FAKE ACS BY DEFAULT
SETMA4: MOVEM W,MAPFN ;STORE FUNCTION FOR MAPADR
MOVEM T,MAPPG ;PAGE OR SPT OFFSET
POPJ P, ;DONE
;SET FAKE ACS
SETFAC: CAIE T,0 ;USER SAY TO USER FAKE ACS?
SETO T, ;YES, FLAG IT AS SUCH
MOVEM T,FAKEAC ;STORE USER ARG
POPJ P, ;DONE
;SET AC BLOCK
IFE FTEXEC,<SETACB==ERR> ;EDDT ONLY
IFN FTEXEC,<
SETACB: SKPEXC ;EXEC MODE?
JRST ERR ;NO, ILLEGAL IN USER MODE
MOVE W2,T ;ARG WHERE SELAC WANTS IT
PUSHJ P,SELAC ;SELECT AC BLOCK
JRST ERR ;SOMETHING'S WRONG
POPJ P, ;DONE
> ;END IFN FTEXEC
;LOAD ACS FROM ADDRESS
SETCAC: MOVE R,T ;ADDRESS IN R
MOVEM R,FAKEAD ;SAVE FOR USER TO READ LATER
MOVSI S,-20 ;LOOP COUNT/INDEX
SETZM FAKEAC ;DON'T GET FAKE ACS FROM FAKE ACS
SETCA2: PUSHJ P,FETCH ;GET A WORD FROM MEMORY
JRST ERR ;ERROR
MOVEM T,AC0(S) ;SAVE AC AWAY IN INTERNAL AC BLOCK
ADDI R,1 ;ADVANCE TO NEXT AC
AOBJN S,SETCA2 ;GET ALL 20 ACS
SETOM FAKEAC ;FLAG USING FAKE 0 - 17
POPJ P, ;DONE
;SET SPT BASE
SETSPT: MOVEM T,SPTWRD ;STORE USER ARG
POPJ P, ;DONE
;SET CST BASE
SETCST: MOVEM T,CSTWRD ;STORE USER ARG
POPJ P, ;DONE
;SET PROTECTION AND RELOCATION
SETREL: MOVEM T,UBASE ;STORE RELOCATION ADDRESS
POPJ P, ;DONE
SETPRT: MOVEM T,UPROT ;STORE PROTECTION ADDRESS
POPJ P, ;DONE
;SET PAGING MODE (KI/KL), ERROR IF IN EXEC MODE
SETKIP: SKIPE W1,T ;TURNING ON OR OFF?
SETO W1, ;ON
SETZ W2, ;THEREFORE NO KL-PAGING
JRST SETKXP ;COMMON CODE
SETKLP: SKIPE W2,T ;TURNING ON OR OFF?
SETO W2, ;ON
SETZ W1, ;THEREFORE NO KL-PAGING
SETKXP:
IFN FTEXEC,< ;EXEC MODE IS ILLEGAL
SKPUSR ;IN USER OR EXEC MODE?
JRST ERR> ;EXEC, THEN DON'T DO IT ERE DEATH RESULT
MOVEM W1,KIPAG ;SET APPROPRIATE KI-PAGING FLAG
MOVEM W2,KLPAG ;SET APPROPRIATE KL-PAGING FLAG
POPJ P, ;END OF COMMAND
SUBTTL COMMAND ROUTINES -- BREAKPOINT FACILITY
IFE FTFILE,<
;ALL $B COMMANDS GET HERE IN FORM: <A>$<N>B
;
;NOTE THAT BREAKPOINT 0 IS TREATED SPECIAL IN THAT IT IS RESERVED FOR
;"UNSOLICITED" BREAKPOINTS - I.E., OCCASIONS WHEREIN CONTROL ARBITRA-
;RILY PASSES TO DDT WITHOUT DDT'S EXPECTING IT - EITHER BY THE USER PRO-
;GRAM EXECUTING A "JSR $0BPT" OR VIA A MONITOR/EXEC INTERRUPT. IN EITHER
;CASE THERE IS NO INSTRUCTION TO BE SAVED/RESTORED/EXECUTED, NO PROCEED
;COUNT, NO CONDITIONAL BREAK INSTRUCTION, ETC. ON PROCEED CONTROL IS
;SIMPLY RETURNED TO THE "INTERRUPTED" PROGRAM.
BPS: TXNN F,SAF ;USER TYPE .GT. ARG (NOT USED)?
SKIPE MAPFN ;ANY MAPPING IN EFFECT
JRST ERR ;EXTRA ARGS OR NOT STRAIGHT VIRTUAL
TXNE F,QF ;HAS <A> BEEN TYPED?
JRST BPS1 ;YES
TXNE F,FAF ;HAS ADDR TO TYPEOUT BEEN TYPED?
JRST ERR ;YES, ILLEGAL UNLESS WE SAW <A> TOO
TXNE F,Q2F ;HAS <N> BEEN TYPED?
JRST BPS2 ;YES
MOVE T,[BPT$B+B$SIZ,,BPT$B+B$SIZ+1] ;NO - COMMAND IS $B
SETZM BPT$B+B$SIZ ;ZERO FIRST WORD OF BREAKPOINT STUFF
BLT T,BPT$E-1 ;CLEAR OUT ALL BREAKPOINTS
POPJ P,
;STILL IFE FTFILE
BPS1: SKIPN R,T ;SAVE COPY OF BREAKPOINT ADDRESS
JRST BPS1A ;<A> = 0 MEANS CLEAR A BPT, NOT SET ONE
PUSHJ P,FETCH ;CAN BREAKPOINT BE INSERTED HERE?
SETZ T, ;PAGE DOESN'T EXIST, BUT WE MIGHT CREATE IT
PUSHJ P,DMEMER ;CAN'T SET BPT IF CAN'T WRITE
PUSH P,R ;HANG ON TO R FOR MOMENT
HRRI R,DDT ;HANDY DANDY LOCATION WE KNOW ABOUT
PUSHJ P,FETCH ;READ THAT SECTION ADDRESS IN OTHER SECTION
JRST ERR ;CAN'T READ, ERGO NO DDT, ERGO ERROR
CAME T,DDT ;DO WE SEEM TO BE IN OTHER SECTION?
JRST ERR ;NO, SO NO BREAKPOINT THERE
POP P,R ;NOW RESTORE R
BPS1A: TXNN F,Q2F ;HAS <N> BEEN TYPED?
JRST BPS3 ;NO
BPS2: MOVE S,WRD2D ;YES - GET DESIRED BREAKPOINT NUMBER
CAIL S,0 ;WITHIN RANGE?
CAILE S,NBP ; . . .
JRST ERR ;NO - COMPLAIN AT USER
IMULI S,B$SIZ ;YES, MAKE INTO BREAKPOINT "INDEX"
TXNN F,QF ;NOW - WAS <A> SPECIFIED?
JRST [XMOVEI T,BPT$B(S) ;NO - RELOCATE INTO BREAKPOINT AREA
JRST MASK2] ;TREAT AS NORMAL ADDRESS
JUMPE R,[SETZM BPT$B+B$ADR(S) ;IF 0$<N>B, JUST CLEAR BPT N
POPJ P,] ;DONE
MOVE T,R ;BREAKPOINT ADDRESS INTO T
MOVEI R,B$SIZ ;START WITH $1B
BPS2E: CAMN T,BPT$B+B$ADR(R);SOME OTHER BREAKPOINT HAVE THIS ADDRESS?
SETZM BPT$B+B$ADR(R) ;YES - BUT NOT ANYMORE!
ADDI R,B$SIZ ;ADVANCE TO NEXT BREAKPOINT SLOT
CAIGE R,B$SIZ*<NBP+1> ;CHECKED THEM ALL YET?
JRST BPS2E ;NOPE - GO GET THE REST
JRST BPS5 ;YES - GO DEFINE THIS (NEW) BREAKPOINT
;STILL IFE FTFILE
BPS3: SKIPN T,R ;PUT THE BREAKPOINT ADR BACK IN T
JRST ERR ;0$B IS ILLEGAL
MOVEI S,B$SIZ ;PROCESS THE COMMAND A$B
;FIRST SEARCH FOR BREAKPOINT ALREADY ASSIGNED TO REQUESTED ADDRESS
BPS4: CAMN T,BPT$B+B$ADR(S);THIS BREAKPOINT HAVE ADDRESS ALREADY?
JRST BPS5 ;YES - PUT BREAKPOINT HERE
ADDI S,B$SIZ ;ADVANCE TO NEXT SLOT
CAIGE S,B$SIZ*<NBP+1> ;TRIED THEM ALL YET?
JRST BPS4 ;NO - KEEP ON LOOKING
;NOW SEARCH FOR A UNUSED BREAKPOINT
MOVEI S,B$SIZ ;START AT $1B
BPS4E: SKIPN BPT$B+B$ADR(S) ;IS THIS BREAKPOINT IN USE?
JRST BPS5 ;NO - USE IT
ADDI S,B$SIZ ;YES, ADVANCE TO NEXT SLOT
CAIGE S,B$SIZ*<NBP+1> ;TRIED THEM ALL YET?
JRST BPS4E ;NO - KEEP ON LOOKING
JRST ERR ;YES, NO MORE BREAKPOINTS LEFT
;NOW HAVE ADDRESS IN T, BREAKPOINT INDEX IN S, SET NEW BREAKPOINT
BPS5: MOVEM T,BPT$B+B$ADR(S);SET NEW BREAKPOINT ADDRESS
MOVSI T,(JFCL) ;A HANDY NOOP (ALBEIT SLOW ON KL-10'S)
MOVEM T,BPT$B+B$XCT(S);PRESET USER CONDITIONAL BREAK INSTRUCTION
MOVEI T,1 ;DEFAULT PROCEED COUNT
MOVEM T,BPT$B+B$CNT(S);SET THAT ALSO
TXZE F,FAF ;USER SPECIFY ADDRESS TO BE OPENED ON BREAK?
SKIPA T,LLIMIT ;YES
SETO T, ;NO
MOVEM T,BPT$B+B$OPN(S);REMEMBER WHICH
SETZM BPT$B+B$FLG(S) ;CLEAR OUT ALL BREAKPOINT FLAGS
MOVX T,BP$PRO ;AUTO PROCEED FLAG
TXNE F,CCF ;AUTO-PROCEEDING BREAKPOINT ($$B)?
IORM T,BPT$B+B$FLG(S);YES, MARK ACCORDINGLY
MOVE T,[JSR BCOM] ;BREAKPOINT JSR'S TO
MOVEM T,BPT$B+B$JSR(S);THIS INSTRUCTION
POPJ P, ;RETURN WITH NEW BREAKPOINT SET
;STILL IFE FTFILE
;HERE ON $P COMMAND -- PROCEED FROM A BREAKPOINT
PROCD: SKIPN BPTIP ;BREAKPOINT IN PROGRESS?
JRST ERR ;NO, $P ILLEGAL
SKIPE S,BPTDX ;GET BREAKPOINT INDEX
TXNN F,QF ;EXPLICIT PROCEED COUNT?
MOVEI T,1 ;NO (OR PROCEED FROM $0B)
MOVEM T,BPT$B+B$CNT(S);SET NEW PROCEED COUNT
MOVX T,BP$PRO ;AUTO PROCEED FLAG
ANDCAM T,BPT$B+B$FLG(S);CLEAR AUTO PROCEED
TXNE F,CCF ;UNLESS AUTO PROCEED ($$P)
IORM T,BPT$B+B$FLG(S);IN WHICH CASE SET AUTO PROCEED
IFN FTEXEC,<PUSHJ P,RSTAC> ;MAKE SURE HAVE RIGHT CONTEXT ACS
PROCD2: PUSHJ P,TCRLF ;<CR><LF> FOR NEATNESS
SKIPE I.LOG ;STILL AT BREAKPOINT PC?
SETZM BPTDX ;NO, NO NEED TO SIMULATE, JUST JUMP TO USER
; NOTE THAT THIS MEANS THAT IF THE USER
; HAS $X'ED AWAY FROM THE BREAKPOINT AND
; BACK AGAIN THEN AN IMMEDIATE BREAKPOINT
; WILL RESULT.
;HERE FROM A BREAKPOINT WHEN IT IS NOT YET TIME TO BREAK. THE BREAKPOINT
;INSTRUCTION MUST BE SIMULATED AND CONTROL RETURNED TO THE USER PROGRAM.
PROCD4: SKIPN BPTDX ;NEED TO SIMULATE AN INSTRUCTION FIRST?
JRST PROCD8 ;NO, RETURN DIRECTLY TO USER PROGRAM
PUSHJ P,$PX ;SIMULATE ONE INSTRUCTION (HANDLES ERCAL/JMP)
JRST ERR ;FATAL ERROR SOMEWHERE
; (NOTE THAT AT THIS POINT THE USER HAS
; NOT YET BEEN INFORMED DDT EVEN HAS
; CONTROL IF THIS IS A NON-BREAKING
; BREAKPOINT!)
PROCD8: PUSHJ P,INSRTB ;INSERT USER PROGRAM BREAKPOINTS
SETZM BPTIP ;CLEAR BREAKPOINT IN PROGRESS (NO 2ND $P)
SETZM I.NPC ;ALSO CLEAR PREVIOUS $X PC
MOVE T,PCWRD ;ADDRESS IN USER PROGRAM AT WHICH TO RESUME
JRST RESTOR ;RETURN TO USER PROGRAM
> ;END IFE FTFILE FROM PAGES AGO
IFN FTFILE,<BPS==<PROCD==ERR>>
SUBTTL COMMAND ROUTINES -- EXECUTE AND SINGLE STEP
IFE FTFILE,<
XEC: SKIPE MAPFN ;STRAIGHT VIRTUAL ADDRESSING?
JRST ERR ;NO - ERROR
TXNN F,QF ;SKIP IF QUANTITY TYPED
TDZA T,T ;MAKE SURE COUNT IS ZERO
TXNN T,777B8 ;SKIP IF VALID INSTRUCTION
JRST $X ;GOTO SINGLE STEP EXECUTE ROUTINE
XEC0: MOVEM T,TEM
PUSHJ P,TCRLF
IFN FTEXEC,<PUSHJ P,RSTAC> ;ENSURE PROPER CONTEXT AC BLOCK
PUSHJ P,INSRTB
SETZM SKPCT ;INIT SKIP COUNT
JSP T,RESTORE
XCT TEM
XEC1: REPEAT SKPMAX,<AOS SKPCT> ;[211] NOTE COUNT OF LOCS SKIPPED
XEC2: JSR SAVE ;SAVE CONTEXT
PUSHJ P,REMOVB ;REMOVE BRKPTS
MOVEI TT,SKPMAX ;[211]
SUB TT,SKPCT ;COMPUTE AMOUNT OF PC INCREMENT
SETZM SKPCT ;[211] DON'T CONFUSE OTHERS
MOVEI T,"<" ;INDICATE INSTRUCTION RETURNED
PUSHJ P,TOUT ;SINCE LINE-FEED ISN'T VERY VISIBLE
JUMPE TT,XEC4 ;IF INST DIDN'T SKIP, JUST CLOSE BRACKETS
MOVEI W1,[ASCIZ "SKIP"] ;MAKE SURE IT IS CLEAR
PUSHJ P,TSTRG ; THAT THIS WAS A SKIP
CAIG TT,1 ;SINGLE SKIP?
JRST XEC4 ;YES, JUST CLOSE OFF
PUSHJ P,TSPC ;TYPE A SPACE
MOVEI T,"0"(TT) ;GET ASCII CHAR COUNT
PUSHJ P,TOUT ;TYPE IT
XEC4: MOVEI T,">" ;CLOSE OFF SKIP MESSAGE
PUSHJ P,TOUT ;WITH A CLOSE ANGLE BRACKET
PUSHJ P,TCRLF ;TYPE 2 CR-LFEEDS
JRST DD1
;STILL IFE FTFILE
;$X IS A FEATURE THAT OPERATES AS FOLLOWS:
; $X OR N$X OR $$X OR N$$X, WHERE N .LT. 2^27, WILL DISPATCH TO
; THIS CODE. THE FOLLOWING ACTIONS WILL BE PERFORMED:
;
; $X EXECUTE A SINGLE INSTRUCTION, THEN INCREMENT THE PC. THE
; OPERANDS TO THE INSTRUCTION WILL BE PRINTED OUT AS THEY
; EXIST **AFTER** EXECUTION OF THE INSTRUCTION. <SKP>
; OR <JMP> WILL BE PRINTED IF THE INSTRUCTION SKIPPED OR
; JUMPED. THE NEXT INSTRUCTION WILL THEN BE PRINTED.
; $P WILL ALWAYS DO THE RIGHT THING AFTER ANY NUMBER OF $X'S.
;
; N$X REPEAT THE $X CYCLE N TIMES.
;
; N$$X SAME AS N$X EXCEPT THAT ALL PRINTOUT IS SUPPRESSED FOR
; ALL BUT THE LAST $X CYCLE.
;
; $$X PERFORM A NON-PRINTING $X CYCLE UNTIL THE PC REACHES
; .+SKPMAX; I.E. UNTIL ONE OF THE NEXT SKPMAX+1 INSTRUCTIONS IS
; EXECUTED. THIS IS USEFUL FOR TREATING A SUBROUTINE CALL
; AS A SINGLE INSTRUCTION FOR THE PURPOSES OF $X.
;
; L<U>$$X IS LIKE $$X ONLY "L" IS THE EXPLICIT LOWER ADDRESS AND
; "U" IS THE EXPLICIT UPPER ADDRESS WHICH, IF THE PC ENTERS
; L .LE. PC .LE. U THE $$X TERMINATES.
IFL SKPMAX-3,<PRINTX ?SKPMAX TOO SMALL, MUST BE AT LEAST THREE>
;STILL IFE FTFILE
;FLAGS USED IN $X LOGIC ONLY
FAC== 400000 ;AC TO BE PRINTED
DFAC== 200000 ;INSTRUCTION USES 2 ACS
QFAC== 100000 ;INSTRUCTION USES 4 ACS
FLG== 040000 ;INSTRUCTION MODIFIES FLAGS (JRST,JFCL)
IMM== 020000 ;IMMEDIATE MODE INSTRUCTION
EA== 010000 ;MEMORY REFERENCE INSTRUCTION
DEA== 004000 ;INSTRUCTION REFERENCES 2 MEM LOCATIONSS
QEA== 002000 ;INSTRUCTION REFERENCES 4 MEM LOCATIONSS
FLA== 001000 ;FLOATING AC OPERAND
FLE== 000400 ;FLOATING MEM OPERAND
EA2== 000200 ;EA HAS AN EA (E.G., BYTE POINTER)
BPA== 000100 ;BYTE POINTER AC OPERAND
BPE== 000040 ;BYTE POINTER MEM OPERAND
IMM2== 000020 ;SECOND EA IS IMMEDIATE
FECJ== 000010 ;INSTRUCTION FOLLOWED BY ERCAL THAT JUMPED
FEJJ== 000004 ;INSTRUCTION FOLLOWED BY ERJMP THAT JUMPED
FECJS== 000002 ;ERCAL/ERJMP GOT SKIPPED
XIMM== 000001 ;EXTENDED IMMEDIATE MODE INSTRUCTION
$XW$L== 100 ;ALL OPCODES .LT. $XW$L ARE DANGEROUS
$XW$U== 677 ;ALL OPCODES .GT. $XW$U ARE DANGEROUS
IFE FTEXEC,<
MONUI== JUSTI ;IF USER DDT, TREAT MONITOR UUOS
MONUE== JUSTE ; AS HARDWARE INSTRUCTIONS
MONUAI==SETI
MONUAE==SETEA
>
;STILL IFE FTFILE
;COME HERE FROM $X COMMAND, WITH T SET TO ZERO IF NO QUANTITY WAS
; TYPED.
$X: SKIPN BPTIP ;HAVE WE HIT A BREAKPOINT?
JRST ERR ;NO, $X IS ILLEGAL
MOVEM T,I.REP ;STORE REPETITION COUNT
JUMPG T,$X0 ;JUMP IF POSITIVE COUNT
MOVE T,PCWRD ;ZERO, FETCH CURRENT PC
MOVEM T,LOCSAV ;AND REMEMBER IT
HRRI T,1(T) ;INSTRUCTION PC + 1
TXNE F,FAF ;USER GIVE BASE PC AT WHICH TO STOP?
SKIPA T,LLIMIT ;YES, FETCH IT
MOVEM T,LLIMIT ;NO, SUPPLY OUR DEFAULT
JUMPL T,ERR ;NEGATIVE BOUNDARY IS NOT ACCEPTABLE
HRRI T,SKPMAX(T) ;DEFAULT STOPPING PLACE
TXNN F,SAF ;USER SUPPLY EXPLICIT STOPPING BOUNDRY?
MOVEM T,ULIMIT ;NO, SUPPLY OUR DEFAULT
SKIPL T,ULIMIT ;GET UPPER BOUNDARY
CAMGE T,LLIMIT ;IS UPPER BOUNDARY ABOVE LOWER BOUNDARY?
JRST ERR ;NO, ERROR
SETOM I.REP ;SET REPETITION COUNT NEGATIVE
TXNN F,CCF ;$$X WITH NO ARG?
MOVNS I.REP ;NO, ONLY $X. TREAT AS 1$X
$X0: PUSHJ P,TCRLF ;OUTPUT CRLF TO START
SETZM I.PXC ;CLEAR IN CASE STICKY
PUSHJ P,$X01 ;DO INSTRUCTION SIMULATION/TRACE STUFF
JRST ERR ;SOMETHING SOMEWHERE KROAKED
POPJ P, ;RETURN FROM $X COMMAND
;HERE FROM ANYPLACE ($P) TO QUIETLY EXECUTE ONE USER INSTRUCTION
;(ADDRESS IN PCWRD) AND RETURN WITHOUT OTHERWISE CHANGING THE WORLD
;AS IN TYPING THE INSTRUCTION OR "<ERSKP>" OR SO FORTH.
$PX: MOVEM F,I.PXF ;SAVE FLAGS OF CALLER
TXO F,CCF ;INDICATE TO BE QUIET
MOVNI T,2 ;AND STAY QUIET
MOVEM T,I.REP ; . . .
SETOM I.PXC ;AND FURTHER, RETURN AFTER ONE ITERATION
PUSHJ P,$X01 ;DO INSTRUCTION SIMULATION/TRACE STUFF
SOS (P) ;SOMETHING SOMEWHERE KROAKED
MOVE F,I.PXF ;RESTORE CALLERS FLAGS
JRST CPOPJ1 ;AND RETURN TO CALLER
;STILL IFE FTFILE
;HERE ON REPEATED $X CYCLES
$X01: AOS I.LOG ;COUNT $X CYCLES FOR $P
SOSN I.REP ;DECREMENT AND TEST COUNTER
TXZ F,CCF ;CLEAR $$ FLAG TO END REPETITIONS
TXZ F,QF!CF!STF ;TURN OFF QUANT, $, ! FLAGS
MOVEM F,FLAGS ;SAVE REGULAR DDT FLAGS
HRRZI T,INDPTH ;SETUP MAX XCT DEPTH
HRRZM T,XCTS
MOVE R,PCWRD ;FETCH ADR OF CURRENT INST
SKIPL I.REP ;INDEFINITE $$X BEING EXECUTED?
MOVEM R,LOCSAV ;NO, REMEMBER OLD PC FOR THIS INST
MOVEM R,I.NPC ;SAVE INSTRUCTION PC
$X02: PUSHJ P,FETCH ;FETCH CURRENT INSTRUCTION
POPJ P, ;ERROR
$X03: MOVEM T,I.NST ;STORE CURRENT INSTRUCTION
IFN FTEXEC,< ;SPECIAL JUNK KS-10
SKPUSR ;IF USER MODE
SKPKS ;OR NOT ON A KS-10
JRST $X05 ;JUST DO IT "NORMALLY"
LDB W2,[POINT 9,I.NST,8] ;OPCODE ABOUT TO BE EXECUTED
CAIE W2,704 ;IF UMOVE
CAIN W2,705 ;OR UMOVEM
JRST $X08 ;LEAVE ALONE
CAIL W2,710 ;SIMILARLY, IF A
CAILE W2,727 ;UNIBUS-FONDLING INSTRUCTION
CAIA ;(ISN'T - TREAT NORMALLY)
JRST $X08 ;LEAVE INSTRUCTION ALONE
> ;END OF IFN FTEXEC
$X05: HLLZ S,PCWRD ;SETUP "SECTIONESS" FOR EFFECTIVE ADR CALC
EXCH F,FLAGS ;RETURN TO REAL DDT FLAGS
PUSHJ P,CEFFIX ;CALCULATE REAL EFFECTIVE ADDRESS
POPJ P, ;MEMORY READ ERROR
EXCH F,FLAGS ;BACK TO $X FLAGS
MOVEM T,I.NSTE ;SAVE EFFECTIVE ADDRESS
MOVE T,[Z @I.NSTE] ;SETUP INTERCEPT ADDRESS POINTER
DPB T,[POINT 23,I.NST,35] ;STORE INTERCEPT ADR IN CURRENT INST
IFN FTEXEC,< ;MORE KS-10 KROCKS
CAIA ;JUST SKIP IF NORMAL
$X08: SETOM I.KRCK ;FLAG KS-10 SPECIAL (NO TYPEOUT)
> ;END OF IFN FTEXEC
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
SETZM I.NXIT ;ASSUME SAFE INSTRUCTION
LDB W1,[POINT 9,I.NST,8] ;GET OPCODE
CAIL W1,$XW$L ;KNOWN TO BE
CAILE W1,$XW$U ;A DANGEROUS INSTRUCTION?
JRST $X12 ;YES
SUBI W1,$XW$L ;NO, MUST CHECK IT, SHIFT IT DOWN
IDIVI W1,^D36 ;W1:=INDEX; W2:=BIT NUMBER
MOVX TT,1B0 ;THE TEST BIT
MOVN W2,W2 ;POSITION COUNTER
LSH TT,(W2) ;POSITION TO BIT "N"
TDNE TT,$XWTBL(W1) ;"DANGEROUS" BIT SET?
$X12: SETOM I.NXIT ;FLAG DANGEROUS INSTRUCTION
LDB W1,[POINT 4,I.NST,12] ;EXTRACT AC FIELD
MOVEM W1,I.NSTAC ;STORE IT AWAY
SETOM I.NJMP ;FLAG NO JUMP TRANSFER ADDRESS (YET)
MOVSI T,777000 ;MASK FOR OPCODE
AND T,I.NST ;FETCH OPCODE
HLRZ F,T ;SAVE IN RH FOR LATER
SETZ TT, ;START OF TABLE INDEX
CAMLE T,$XTBL(TT) ;IN RANGE OF CURRENT TABLE ENTRY?
AOJA TT,.-1 ;NO, KEEP SEARCHING
HRRZ TT,$XTBL(TT) ;FETCH INSTRUCTION HANDLER
;NOTE R, W1 SETUP FOR INSTRUCTION HANDLERS
JRST (TT) ;DISPATCH TO INSTRUCTION HANDLER
;STILL IFE FTFILE
;$XWTBL - TABLE OF DANGEROUS OPCODES - I.E., INSTRUCTIONS AFTER
;WHICH DDT CAN NO LONGER TRUST SYMBOL TABLE POINTERS ETC., OR
;WHICH MAY USE/SET TERMINAL AND OTHER CHARACTERISTICS THAT DDT
;CHANGES.
IF1 < ;;INIT FLAG WORDS PASS 1
DEFINE $$XW0 (NDX),<$XW.'NDX==0> ;;INITIALIZE ALL BITS TO 0
$$XW..==-1 ;;INITIALIZE INITIALIZATION COUNTER
REPEAT <<$XW$U-$XW$L>/^D36>,< ;;ONCE FOR EACH BLOCK OF 36 OPCODES
$$XW..==$$XW..+1 ;;NEXT BLOCK OF 36 OPCODES
$$XW0 (\$$XW..) > ;;SET ALL TO ZERO (END OF REPEAT)
PURGE $$XW0,$$XW.. ;;DON'T NEED GARBAGE SYMBOLS ANYMORE
> ;END IF1
IF2 < ;;SET THE BITS ON PASS2
DEFINE $$XW (OP),< ;;THE SET-THE-BIT MACRO
$$XW.1==<<<<OP>_-^D27>-$XW$L>/^D36> ;;"INDEX" INTO BIT TABLE
$$XW.2==<<<<OP>_-^D27>-$XW$L> - <<<<<OP>_-^D27>-$XW$L>/^D36>*^D36>>
;;BIT WITHIN INDEX WORD IN BIT TABLE
$$XW1 (\$$XW.1,\$$XW.2)> ;;SET THE BIT (END OF MACRO DEFINITION)
DEFINE $$XW1 (NDX,BIT),<$XW.'NDX==$XW.'NDX ! 1B^O'BIT> ;;SET THE BIT
;NOW FLAG ALL OPCODES WHICH WE CONSIDER "DANGEROUS"
$$XW JSYS
$$XW DMOVEM
$$XW DMOVNM
$$XW IDPB
$$XW DPB
$$XW FADM
$$XW FADB
$$XW FADRM
$$XW FADRB
$$XW FSBM
$$XW FSBB
$$XW FSBRM
$$XW FSBRB
$$XW FMPM
$$XW FMPB
$$XW FMPRM
$$XW FMPRB
$$XW FDVM
$$XW FDVB
$$XW FDVRM
$$XW FDVRB
$$XW MOVEM
$$XW MOVSM
$$XW MOVSS
$$XW MOVNM
$$XW MOVNS
$$XW MOVMM
$$XW MOVMS
$$XW IMULM
$$XW IMULB
$$XW MULM
$$XW MULB
$$XW IDIVM
$$XW IDIVB
$$XW DIVM
$$XW DIVB
$$XW EXCH
$$XW BLT
$$XW XCT
$$XW ADDM
$$XW ADDB
$$XW SUBM
$$XW SUBB
$$XW AOS
$$XW AOSL
$$XW AOSE
$$XW AOSLE
$$XW AOSA
$$XW AOSGE
$$XW AOSN
$$XW AOSG
$$XW SOS
$$XW SOSL
$$XW SOSE
$$XW SOSLE
$$XW SOSA
$$XW SOSGE
$$XW SOSN
$$XW SOSG
$$XW SETZM
$$XW SETZB
$$XW ANDM
$$XW ANDB
$$XW ANDCAM
$$XW ANDCAB
$$XW ANDCMM
$$XW ANDCMB
$$XW SETAM
$$XW SETAB
$$XW XORM
$$XW XORB
$$XW IORM
$$XW IORB
$$XW ANDCBM
$$XW ANDCBB
$$XW EQVM
$$XW EQVB
$$XW SETCAM
$$XW SETCAB
$$XW ORCAM
$$XW ORCAB
$$XW SETCMM
$$XW SETCMB
$$XW SETOM
$$XW SETOB
$$XW HLLM
$$XW HLLS
$$XW HRLM
$$XW HRLS
$$XW HLLZM
$$XW HLLZS
$$XW HRLZM
$$XW HRLZS
$$XW HLLOM
$$XW HLLOS
$$XW HRLOM
$$XW HRLOS
$$XW HLLEM
$$XW HLLES
$$XW HRLEM
$$XW HRLES
$$XW HRRM
$$XW HRRS
$$XW HLRM
$$XW HLRS
$$XW HRRZM
$$XW HRRZS
$$XW HLRZM
$$XW HLRZS
$$XW HRROM
$$XW HRROS
$$XW HRREM
$$XW HRRES
$$XW HLREM
$$XW HLRES
PURGE $$XW,$$XW1,$$XW.1,$$XW.2
> ;END IF2
DEFINE $$XWRD (NDX),<EXP $XW.'NDX>
$XWTBL: ;;DANGEROUS OPCODE BIT TABLE
$$XW..==-1 ;;INITIALIZE BIT TABLE INDEX
REPEAT <<$XW$U-$XW$L>/^D36>,<
$$XW..==$$XW..+1 ;;NEXT WORD OF BIT TABLE
$$XWRD (\$$XW..)
> ;;END OF REPEAT
IF2 <PURGE $$XWRD,$$XW..> ;;JUNK SYMBOLS
;STILL IFE FTFILE
;OPCODE DISPATCH TABLE.
; LH OF EACH ENTRY CONTAINS LARGEST OPCODE COVERED BY THAT ENTRY,
; RH CONTAINS DISPATCH ADDRESS.
$XTBL: SETZB SET ; 400-403 SETZX
SETM CHECKI ; 404-414 ALL LOGICAL EXCEPT SETX
XMOVEI SETIX ; 415 XMOVEI
ORCBB CHECKI ; 416-473 ALL LOGICAL EXCEPT SETX
SETOB SET ; 474-477 SETOX
HLRES CHEKIS ; 500-577 HALFWORD
TSON TESTS ; 600-677 TEST CLASS
777000,,IOTS ; 700-777 I/O INSTRUCTIONS
0 ,, CPOPJ ; 000 ALWAYS ILLEGAL
037000,,USRUUO ; 001-037 USER UUOS
040000,,MONUAE ; 040 OLD TOPS-10 CALL
INIT MONINI ; 041 INIT
CALLI MONUAI ; 042-047 UNDEFINED AND CALLI
TTCALL MONUE ; 050-051 OPEN,TTCALL
054000,,MONUAI ; 052-054 UNDEFINED
OUT MONUE ; 055-057 RENAME,IN,OUT
STATO MONUI ; 060-061 SETSTS,STATO
GETSTS MONUE ; 062 GETSTS
OUTBUF MONUI ; 063-065 STATZ,INBUF,OUTBUF
OUTPUT MONUE ; 066-067 INPUT,OUTPUT
USETO MONUI ; 070-075 CLOSE,RELEAS,MTAPE,UGETF,USETI,USETO
ENTER MONUE ; 076-077 LOOKUP,ENTER
103000,,SETI ; 100-103 UNDEFINED
JSYS DOIT ; 104 JSYS
ADJSP SETI ; 105 ADJSP
107000,,SETI ; 106-107 UNDEFINED
DFDV DFLOT ; 110-113 DFAD,DFSB,DFMP,DFDV *** KI10
DSUB DMOV ; 114-115 DADD,DSUB
DDIV SETQFA ; 116-117 DMUL,DDIV
DMOVN DMOV ; 120-121 DMOVE,DMOVN *** KI10
FIX FXAFLE ; 122 FIX *** KI10
123000,,SETI ; 123 UNDEFINED
DMOVNM DMOV ; 124-125 DMOVEM,DMOVNM *** KI10
FIXR FXAFLE ; 126 FIXR *** KI10
FLTR FLAFXE ; 127 FLTR *** KI10
UFA IUFA ; 130 UFA
DFN IDFN ; 131 DFN
FSC IFSC ; 132 FSC
IBP IIBP ; 133 IBP
ILDB IIXBP ; 134 ILDB
LDB IXBP ; 135 LDB
IDPB IIXBP ; 136 IDPB
DPB IXBP ; 137 DPB
FDVRB FLOAT ; 140-177 FADXX,FSBXX,FMPXX,FDVXX
;STILL IFE FTFILE
;CONTINUATION OF OPCODE DISPATCH TABLE.
MOVMS CHEKIS ; 200-217 MOVXX
IMULB CHECKI ; 220-223 IMULX
DIVB MULDIV ; 224-237 MULX,XDIVX
LSH SETI ; 240-242 ASH,ROT,LSH
JFFO IJFFO ; 243 JFFO
LSHC DBLI ; 244-246 ASHC,ROTC,LSHC
247000,,SETI ; 247 UNDEFINED
EXCH SETEA ; 250 EXCH
BLT SETI ; 251 BLT
AOBJN IAOBJ ; 252-253 AOBJP,AOBJN
JRST IJRST ; 254 JRST
JFCL IJFCL ; 255 JFCL
XCT IIXCT ; 256 XCT
MAP SETI ; 257 MAP *** KI10
PUSHJ IIPUSHJ ; 260 PUSHJ
POP SETEA ; 261-262 PUSH,POP
POPJ IPOPJ ; 263 POPJ
JSR I.JSR ; 264 JSR
JSP I.JSP ; 265 JSP
JSA I.JSA ; 266 JSA
JRA IAOBJ ; 267 JRA
SUBB CHECKI ; 270-277 ADDX,SUBX
CAIG SETI ; 300-307 CAIXX
CAMG SETEA ; 310-317 CAMXX
SOSG JMPSKP ; 320-377 JUMPXX,SKIPXX,AOJXX,AOSXX,SOJXX,SOSXX
;STILL IFE FTFILE
;ALL OPCODES LESS THAN 100 END UP HERE
;MONITOR UUO HANDLER
IFN FTEXEC,<
MONINI: SKPEXC ;HANDLE USER AND EXEC DIFFERENTLY
JRST USRINI ;USER-MODE INIT
JRST MONUE0 ;EXEC-MODE INIT
MONUAI: TLO F,FAC ;REMEMBER TO PRINT AC
MONUI: SKPEXC ;SKIP IF EXEC MODE
JRST JUSTI ;USER MODE, TREAT UUO AS SINGLE INST
JRST MONUE0 ;EXEC MODE, TRACE THE UUO
MONUAE: TLO F,FAC ;REMEMBER TO PRINT AC
MONUE: SKPEXC ;SKIP IF EXEC MODE
JRST JUSTE ;USER MODE, TREAT UUO AS SINGLE INST
MONUE0: SKPNKA ;CAN SIMULATE ON A KA
JRST USRUUO ;KA-10 EXEC MODE, TRACE THE UUO
POPJ P, ;KI/KL/KS EXEC MODE LOSES FOR THE MOMENT
> ;END IFN FTEXEC
;HANDLE INIT UUO (USER MODE ONLY)
IFE FTEXEC,<MONINI:> ;USER INIT
USRINI: MOVE T,I.NST ;USER INIT INSTRUCTION
TXZ T,<@(17)> ;CLEAR BLETCH BITS
HRR T,I.NSTE ;GET I/O BITS AND MODE (TOPS-10)
MOVEM T,I.NJR0 ;SET IN SCRATCH BLOCK
MOVE R,PCWRD ;ADDRESS OF INIT UUO
HRRI R,1(R) ;ADDRESS OF DEVICE WORD
PUSHJ P,FETCH ;GET IT
POPJ P, ;MEMORY READ ERROR
MOVEM T,I.NJR1 ;SET SECOND WORD OF SCRATCH BLOCK
HRRI R,1(R) ;ADDRESS OF BUFFER RING HEADER(S)
PUSHJ P,FETCH ;GET IT(THEM)
POPJ P, ;MEMORY READ ERROR
MOVEM T,I.NJR2 ;SET THIRD WORD OF SCRATCH BLOCK
MOVE T,[JRST DOITX0+3] ;INIT "NON-SKIP" RETURN
MOVEM T,I.NJR3 ;SET FOURTH WORD OF SCRATCH BLOCK
HRRI T,1(T) ;INIT "SKIP" RETURN
MOVEM T,I.NJR4 ;FINISH OFF SCRATCH BLOCK
MOVE T,[JRST I.NJR0] ;NOW INTERCEPT DOITX'S XCT
MOVEM T,I.NST ;SET TO EXECUTE I.NJR? BLOCK
JRST DOITX ;GO DO IT
;USER UUO HANDLER
USRUUO: MOVE S,PCWRD ;PC OF USER INSTRUCTION
TLNE S,-1 ;IN SECTION 0?
JRST SETEA ;TEMP . . .
MOVEI R,.JBUUO ;SETUP JOBUUO
EXCH F,FLAGS ;RESTORE REGULAR FLAGS
MOVE T,I.NST ;FETCH INST WITH EFF ADR @ I.NSTE
TXZ T,@ ;CLEAR @ BIT
HRR T,I.NSTE ;MERGE IN COMPUTED EFFECTIVE ADDR
PUSHJ P,DEPMEM ;STORE USER UUO IN .JBUUO IF POSSIBLE
POPJ P, ;MEMORY WRITE ERROR (?)
EXCH F,FLAGS ;RESTORE $X FLAGS
MOVE T,[XCT 41] ;PRETEND INSTRUCTION WAS AN XCT
JRST $X03
;STILL IFE FTFILE
;INTERPRET FSC
IFSC: TLO F,FAC+FLA+IMM ;FLOATING AC, FIXED IMMEDIATE E
JRST DOIT
;INTERPRET UFA
IUFA: TLOA F,FLA+FLE+DFAC ;REMEMBER FLTG PT, USES 2 ACS
;INTERPRET DFN
IDFN: TLO F,FLA!FLE ;DFN, REMEMBER AC AND E FLOAT
JRST SETEA
;INTERPRET FIX, FIXR, FLTR
FXAFLE: TLOA F,FLE ;REMEMBER THAT E FLOATS (FIX,FIXR)
FLAFXE: TLO F,FLA ;REMEMBER THAT AC FLOATS (FLTR)
JRST SETEA
;INTERPRET FLOATING POINT INSTRUCTIONS
FLOAT: ANDI F,7000 ;FLOATING PT, GET MODE
CAIN F,1000 ;LONG MODE?
TLOA F,DFAC ;YES, PRINT 2 ACS
CAIE F,5000 ;IMMEDIATE MODE?
TLOA F,FLA+FLE+FAC+EA ;NO, PRINT AC AND E BOTH FLOATING
TLO F,FLA+FLE+FAC+IMM ;YES, PRINT AC AND E IMMEDIATE FLTG
JRST DOIT
;STILL IFE FTFILE
;INTERPRET JRST
IJRST: JRST @IJ$DSP(W1) ;DISPATCH TO JRST NN, HANDLER
IJ$DSP: IFIW IJ$00 ;JRST 0,
IFIW IJ$01 ;JRST 01, (PORTAL)
IFIW IJ$02 ;JRST 02, (JRSTF)
IFIW IJ$03 ;JRST 03,
IFIW IJ$04 ;JRST 04, (HALT)
IFIW IJ$05 ;JRST 05, (XJRSTF)
IFIW IJ$06 ;JRST 06, (XJEN)
IFIW IJ$07 ;JRST 07, (XPCW)
IFIW IJ$10 ;JRST 10,
IFIW IJ$11 ;JRST 11,
IFIW IJ$12 ;JRST 12, (JEN)
IFIW IJ$13 ;JRST 13,
IFIW JUSTE ;JRST 14, (XSFM) (TREAT LIKE SETOM)
IFIW IJ$15 ;JRST 15,
IFIW IJ$16 ;JRST 16,
IFIW IJ$17 ;JRST 17,
;JRST 00, - NORMAL UNCONDITIONAL JRST
IJ$00: TLO F,IMM!XIMM ;PRINT "E"
MOVE R,I.NSTE ;NEW USER PC
MOVEI T,NOSKIP ;DDT TRANSFER ADDRESS
JRST IJ$RS ;COMMON CODE
;JRST 01, - PORTAL
IFE FTEXEC,<SYN IJ$00,IJ$01>;USER PORTAL IS NORMAL JRST
IFN FTEXEC,<
IJ$01: TLO F,IMM!XIMM ;PRINT "E"
SKPUSR ;SPECIAL ONLY IF EXEC MODE
SKPKA ;ON A KA-10
JRST IJ$00 ;TREAT AS NORMAL JRST
JRST PROCD2 ;RETURN TO USER MODE - CAN'T TRACE
> ;END OF IFN FTEXEC
;STILL IFE FTFILE
;JRST 02, - JRSTF
IJ$02: TLO F,IMM!XIMM!FLG ;PRINT "E" AND PC FLAGS
HLLZ T,LASEAF ;GET NEW PC FLAGS
IFN FTEXEC,<JSP TT,IJ$US> ;ENTERING USER MODE?
HRRI T,NOSKIP ;DDT TRANSFER ADDRESS
MOVEM T,I.NJR0 ;SET IN INTERNAL INTERCEPT BLOCK
MOVE T,[Z @I.NJR0] ;INDIRECT ADDR FOR JRSTF @
MOVE R,I.NSTE ;NEW USER PC
JRST IJ$RS ;COMMON CODE
;JRST 03,
;JRST 04, - HALT
SYN IJ$00,IJ$03 ;JRST 03, IS UNKNOWN
SYN IJ$00,IJ$04 ;JRST 04, IS LIKE JRST 00,
;JRST 05, - XJRSTF
IJ$05: TLO F,FLG!EA!DEA ;PRINT FLGS AND FLAG-PC DOUBLE WORD
MOVE R,I.NSTE ;EFFECTIVE ADDRESS OF FLAG-PC DOUBLE WORD
JSP W1,IJ$05F ;SETUP I.NJRXX
XMOVEI T,NOSKIP ;DDT INTERCEPT ADDRESS
MOVEM T,I.NJR3 ;SET IN INTERCEPT BLOCK
MOVEI T,I.NJR2 ;ADDR OF INTERCEPT BLOCK
JRST IJ$RS ;COMMON CODE
IJ$05F: PUSHJ P,FETCH ;GET FLAGS OF FLAG-PC DOUBLE WORD
POPJ P, ;FAILURE
IFN FTEXEC,<JSP TT,IJ$US> ;GOING FROM EXEC TO USER MODES?
MOVEM T,I.NJR2 ;SET FLAGS IN FLAG WORD
HRRI R,1(R) ;EFFECTIVE ADDRESS + 1
PUSHJ P,FETCH ;GET DESIRED NEW USER PC
POPJ P, ;FAILURE
MOVE R,T ;RETURN IN R
JRST (W1) ;RETURN TO CALLER
;JRST 06, - XJEN
SYN IJ$05,IJ$06 ;JRST 06, - XJEN - TREAT LIKE XJRSTF
;STILL IFE FTFILE
;JRST 07, - XPCW
IJ$07: TLO F,FLG!EA!DEA!QEA ;PRINT FLAGS AND 4 MEM LOCS
MOVE R,I.NSTE ;ADDRESS OF MEM BLOCK
HRRI R,2(R) ;ADDRESS OF NEW FLAG-PC DOUBLE WORD
JSP W1,IJ$05F ;SETUP I.NJRXX
XMOVEI T,IJ$07I ;DDT INTERCEPT ADDRESS
MOVEM T,I.NJR3 ;SET IN INTERCEPT BLOCK
MOVEI T,I.NJR0 ;ADDRESS OF INTERCEPT BLOCK
JRST IJ$RS ;COMMON CODE
IJ$07I: JSR SWAP ;SWAP TO DDT CONTEXT
SKIPGE I.NXIT ; . . .
PUSHJ P,TTYRET ; . . .
MOVE R,I.NSTE ;ADDRESS OF FOUR-WORD BLOCK
MOVE T,I.NJR0 ;SAVED FLAGS
PUSHJ P,DEPMEM ;WRITE INTO USERS BLOCK
POPJ P, ;MEMORY WRITE ERROR
MOVE T,I.NPC ;ADDRESS OF USER INSTRUCTION
HRRI T,1(T) ;PLUS ONE
PUSHJ P,DEPMEM ;FINISH USERS SAVED FLAG-PC DOUBLE WORD
POPJ P, ;MEMORY WRITE ERROR
JRST TELLX ;FINISH UP THE $X
;JRST 10, ;JRST 11, ;JRST 12, ;JRST 13, ;JRST 15, ;JRST 16, ;JRST 17,
SYN IJ$00,IJ$10 ;JRST 10, - TREAT LIKE JRST 00,
SYN IJ$00,IJ$11 ;JRST 11, - TREAT LIKE JRST 00,
SYN IJ$02,IJ$12 ;JRST 12, - JEN - TREAT LIKE JRSTF
SYN IJ$00,IJ$13 ;JRST 13, - TREAT LIKE JRST 00,
SYN IJ$00,IJ$15 ;JRST 15, - TREAT LIKE JRST 00,
SYN IJ$00,IJ$16 ;JRST 16, - TREAT LIKE JRST 00,
SYN IJ$00,IJ$17 ;JRST 17, - TREAT LIKE JRST 00,
IJ$RS: MOVEM R,I.NJMP ;SAVE NEW (JUMP) INSTRUCTION PC
DPB T,[POINT 23,I.NST,35] ;SET DDT INTERCEPT ADDRESS
JRST DOIT ;AND GO DOIT
IFN FTEXEC,<
IJ$US: SKPUSR ;EXEC MODE?
TXNN T,1B5 ;GOING INTO USER MODE?
JRST (TT) ;NO
JRST PROCD2 ;YES, CAN'T TRACE, JUST DO IT
> ;END OF IFN FTEXEC
;STILL IFE FTFILE
;INTERPRET XCT
IIXCT: JUMPN W1,JUSTE ;IF A PXCT JUST DO IT BLINDLY
MOVE F,FLAGS ;GET BACK NORMAL DDT FLAGS
SOSG XCTS ;CHECK XCT COUNTER
POPJ P, ;CHECK XCT DEPTH COUNTER
TXNE F,CCF ;$$X?
JRST IIXCT1 ;YES, DON'T PRINT ANYTHING
MOVE T,I.NSTE ;GET EFF ADR OF XCT
PUSHJ P,PINST ;PRINT INST BEING XCT'ED
PUSHJ P,TCRLF ;OUTPUT CRLF AFTER INST
IIXCT1: MOVE R,I.NSTE ;GET EFF ADR OF XCT AGAIN
JRST $X02 ;PROCESS EXECUTED INST
;INTERPRET PUSHJ
IIPUSH: PUSHJ P,IIXPCF ;FETCH PC+1 AND (MAYBE) FLAGS
MOVEM T,I.NSTP ;STORE AWAY TO BE STACKED
MOVSI T,(1B4) ;CLEAR BIS FLAG IN NEW PC WORD
ANDCAM T,PCFLG
MOVE T,I.NSTE ;NEW USER PC
MOVEM T,I.NJMP ;SET NEW USER PC
HRLZI T,(<PUSH>-<PUSHJ>) ;WANT TO TURN PUSHJ INTO A PUSH
DPB T,[POINT 5,I.NST,17] ;CLEAR I AND AC FIELD
JRST IPOPJ2 ;REST OF CODE COMMON WITH POPJ
;INTERPRET POPJ
IPOPJ: EXCH F,FLAGS ;POPJ, RESTORE NORMAL DDT FLAGS
MOVE R,AC0(W1) ;FETCH CONTENTS OF CORRECT USER AC
MOVE S,I.NPC ;PC OF INSTRUCTION
SKIPL R ;SKIP IF LOCAL STACK POINTER
TLNN S,-1 ;OR GLOBAL POINTER IN NON-ZERO SECTION
HLL R,S ;RELOCATE POINTER TO CURRENT SECTION
PUSHJ P,FETCH ;FETCH PCWORD IT POINTS TO
POPJ P, ;ERROR
EXCH F,FLAGS ;RESTORE $X FLAGS
TLNN S,-1 ;INSTRUCTION FROM NON-ZERO SECTION?
ANDI T,-1 ;NO, THEN PC ALWAYS BACK TO SECTION 0
MOVEM T,I.NJMP ;STORE AS CURRENT PC
HRLZI T,(<POP>-<POPJ>) ;SETUP TO TURN POPJ INTO POP
;COMMON CODE FOR PUSHJ, POPJ
IPOPJ2: ADDM T,I.NST ;TURN PUSHJ INTO PUSH OR POPJ INTO POP
HRRZI T,I.NSTP ;SETUP ADR OF PC WORD FOR PUSHJ
DPB T,[POINT 23,I.NST,35] ;SET DDT INTERCEPT ADDRESS
JUSTAC: TLO F,FAC ;REMEMBER TO PRINT AC
JRST DOIT ;GO OFF AND EXECUTE THE INSTRUCTION
;STILL IFE FTFILE
;INTERPRET JSA
I.JSA: MOVE T,I.NPC ;FETCH INSTRUCTION PC
HRRI T,1(T) ;PLUS ONE
MOVEM T,I.NJMP ;BECOMES NEW USER PC
HRL T,I.NSTE ;PUT EFF ADR IN LH LIKE JSA DOES
EXCH T,AC0(W1) ;STORE IN USER AC, GET OLD CONTENTS
JRST I.JSR2 ;STORE OLD CONTENTS LIKE JSR, THEN JUMP
;INTERPRET JSR
I.JSR: PUSHJ P,IIXPCF ;NEW PC AND (MAYBE) FLAGS
TLO F,FAC ;REMEMBER NOT TO PRINT AC FIELD
MOVX W1,1B4 ;CLEAR BIS FLAG IN NEW PC WORD
ANDCAM W1,PCFLG
I.JSR2: TLO F,EA ;PRINT E NORMALLY
EXCH F,FLAGS ;RESTORE NORMAL DDT FLAGS
MOVE R,I.NSTE ;FETCH EFF ADR OF JSR OR JSA
PUSHJ P,DEPMEM ;STORE PC WORD
POPJ P, ;MEMORY WRITE ERROR
EXCH F,FLAGS ;RESTORE $X FLAGS
MOVE T,I.NSTE ;GET EFF ADR AGAIN
HRRI T,1(T) ;INC PAST STORED PC WORD
JRST I.JSR4 ;SET NEW USER PC
;INTERPRET JSP
I.JSP: PUSHJ P,IIXPCF ;GET NEW PC AND (MAYBE) FLAGS
MOVEM T,AC0(W1) ;STORE IN USER AC
MOVSI T,(1B4) ;CLEAR BIS FLAG IN NEW PC WORD
ANDCAM T,PCFLG
MOVE T,I.NSTE ;GET BACK EFF ADR
I.JSR4: MOVEM T,I.NJMP ;STORE NEW PC
TLC F,FAC ;REMEMBER TO PRINT AC
JRST TELL ;GO PERFORM PRINTOUT
;CALCUATE FLAG-PC WORD A LA JSP/PUSHJ
IIXPCF: MOVE T,I.NPC ;INSTRUCTION PC
HRRI T,1(T) ;PLUS ONE
TLNN T,-1 ;IN SECTION ZERO?
HLL T,PCFLG ;YES, L.H. GETS PC FLAGS
POPJ P, ;RETURN WITH FLAG-PC WORD
;STILL IFE FTFILE
;INTERPRET DOUBLE (OR MORE) WORD INSTRUCTIONS
SETQFA: TLOA F,QFAC ;FLAG QUADRUPLE ACS
DFLOT: TLO F,FLA+FLE ;REMEMBER THAT AC AND E ARE FLOATING
DMOV: TLO F,DFAC+DEA ;REMEMBER AC AND E BOTH DOUBLE
JRST SETEA
;HERE TO INTERPRET BYTE MANIPULATION INSTRUCTIONS
;TREAT ILDB/IDPB AS IBP THEN LDB/DPB
IIXBP: MOVX T,1B8 ;CONVERT TO LDB/DPB
IORM T,I.NST ; . . .
MOVE T,PCFLG ;GET USER PC FLAGS
TXZE T,1B4 ;CLEAR BIS, WAS IT SET?
JRST [MOVEM T,PCFLG ;YES, CLEAR IT
JRST IXBP] ;SKIP INCREMENTING THE PTR
JSR SWAP ;GET USER CONTEXT
IBP @I.NSTE ;INCREMENT THE USER'S BYTE PTR
JSR SWAP ;BACK TO DDT CONTEXT
IXBP: EXCH F,FLAGS ;BACK TO DDT FLAGS
MOVE R,I.NSTE ;GET ADDRESS OF BYTE POINTER
PUSHJ P,FETCH ;FETCH BYTE POINTER
POPJ P, ;FAILURE
HLLZ S,I.NSTE ;PRESET SECTION
PUSHJ P,CEFFIX ;CALCULATE BYTE POINTER EFFECTIVE ADDRESS
POPJ P, ;MEMORY READ ERROR
MOVEM T,I.NEA2 ;REMEMBER IT FOR LATER TYPEOUT
EXCH F,FLAGS ;BACK TO $X FLAGS
TLO F,FAC!EA!EA2!BPE ;SET FLAGS
JRST DOIT ;AND GO DO GRUNGE
IIBP: TLO F,BPE!EA ;IBP (MAYBE)
JUMPE W1,DOIT ;IF SO, GO DO IT
TLO F,BPA!FAC ;ADJBP INSTRUCTION
JRST DOIT ;NOW GO DO IT
;STILL IFE FTFILE
;INTERPRET JFFO
IJFFO: TLO F,DFAC ;REMEMBER JFFO USES 2 ACS
;INTERPRET JUMP AND SKIP INSTRUCTIONS
JMPSKP: TRNE F,10000 ;JUMP/SKIP, WHICH IS IT?
JRST SKP ;SKIP CLASS
;INTERPRET AOBJN AND AOBJP
IAOBJ: TLOA F,FAC+IMM!XIMM ;HANDLE AS IMMEDIATE MODE INST WITH AC
;INTERPRET JFCL
IJFCL: TLO F,FLG ;REMEMBER TO PRINT FLAGS
MOVEI T,JMP ;JUMP CLASS OR AOBJ, COME BACK TO $X
DPB T,[POINT 23,I.NST,35] ;STORE INTERCEPT ADDRESS
JRST DOIT ;GO EXECUTE CONDITIONAL INST
;HERE AFTER EXECUTING CONDITIONAL JUMP INSTRUCTION THAT ACTUALLY
; DOES JUMP
JMP: EXCH T,I.NSTE ;SAVE T, GET EFF ADR OF JUMP
MOVEM T,PCWRD ;STORE EFF ADR AS NEW PC
EXCH T,I.NSTE
JRST NOSKIP ;NOW DO PRINTOUT
;HERE FOR ALL SKIP INSTRUCTIONS
SKP: JUMPN W1,SETEA ;SKIP CLASS - AC FIELD ZERO?
JUSTE: TLOA F,EA ;YES, JUST PRINT E
;INTERPRET SHIFT COMBINED INSTRUCTIONS
DBLI: TLO F,FAC+DFAC+IMM ;REMEMBER 2 ACS USED, IMMEDIATE
JRST DOIT ;EXECUTE NORMALLY
;INTERPRET TEST CLASS INSTRUCTIONS
TESTS: TRNN F,10000 ;SKIP ON TD OR TS BUT NOT ON TR OR TL
TLOA F,FAC+IMM ;IMMEDIATE MODE
TLO F,FAC+EA ;NORMAL MODE
JRST DOIT
;HERE FOR XMOVEI
SETIX: TLO F,IMM!XIMM ;EXTENDED IMMEDIATE INSTRUCTION
JRST DOIT ;GO PRINT
;STILL IFE FTFILE
;I/O INSTRUCTIONS
IOTS: AOSN I.KRCK ;SPECIAL KS-10 KROCK FLAG SET?
JRST JUSTAC ;YES, JUST PRINT THE AC
TRNE W1,4 ;SKIP IF BLKI,DATAI,BLKO,DATAO
CAIN W1,5 ;SKIP IF NOT CONI
TLOA F,EA ;MEM REF INSTRUCTION
JUSTI: TLO F,IMM ;IMMEDIATE INST
JRST DOIT
;ALL PATHS CONVERGE HERE
CHEKIS: TRC F,3000 ;HERE TO TEST FOR IMMEDIATE OR SELF MODE
TRCE F,3000 ;SKIP IF SELF MODE
JRST CHECKI ;NO, CHECK IMMEDIATE
JRST SKP ;YES, GO TEST FOR NONZERO AC FIELD
SET: ANDI F,3000 ;HERE FOR SETZX,SETOX
CAIE F,2000 ;SETZM,SETOM?
TLO F,FAC ;NO, AC IS ALWAYS AFFECTED
TRNE F,2000 ;SETZM,SETZB,SETOM,SETOB?
TLO F,EA ;YES, MEM IS ALWAYS AFFECTED
JRST DOIT
;FIXED POINT MULTIPLY AND DIVIDE (NOT INCLUDING IMULX)
MULDIV: ANDI F,3000 ;MASK MODE BITS
CAIE F,2000 ;TO MEMORY ONLY?
TLO F,DFAC ;NO, INST USES 2 AC'S
CHECKI: TRNE F,1000 ;TEST FOR IMMEDIATE MODE INST
TRNE F,2000
SETEA: TLOA F,FAC+EA ;MEM REF INSTRUCTION
SETI: TLO F,FAC+IMM ;IMMEDIATE MODE INSTRUCTION
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
DOIT: EXCH F,FLAGS ;RESTORE NORMAL DDT FLAGS
IFN FTDEC20,< ;HANDLE TOPS-20 ERCAL/ERJMP
MOVE R,I.NPC ;ADDRESS OF INSTRUCTION ABOUT TO BE XCT'ED
HRRI R,1(R) ;ADDRESS FOLLOWING
PUSHJ P,FETCH ;SEE WHAT FOLLOWS INSTRUCTION
JRST DOITX ;WHO KNOWS - JUST GO DO IT
MOVEM T,I.NECJ ;SAVE INCASE ERCAL/ERJMP
LSH T,<^L<@>-^D36> ;WANT JUST OP AND AC FIELDS
CAIN T,<<ERJMP>_<^L<@>-^D36>> ;ERJMP INSTRUCTION?
JRST DOITJ ;YES - SPECIAL HANDLING
CAIE T,<<ERCAL>_<^L<@>-^D36>> ;ERCAL INSTRUCTION?
JRST DOITX ;NO - TREAT NORMALLY
;HERE IF INSTRUCTION FOLLOWED BY ERCAL
DOITC: SKIPGE I.NXIT ;IF DANGEROUS INSTRUCTION
PUSHJ P,TTYLEV ;THEN RESTORE TTY ET AL
IFN FTEXEC,<PUSHJ P,RSTAC> ;ENSURE RIGHT CONTEXT ACS
JSR SWAP ;SWAP TO USER CONTEXT
XCT I.NST ;EXECUTE THE INSTRUCTION
ERJMP DOITC3 ;CATCH ANY ERRORS
JRST DOITJ1 ;COMMON CODE
DOITC3: MOVEM T,SAFETY ;HOLD T FOR MOMENT
MOVSI T,FECJ ;FLAG ERCAL JUMPED
JRST DOITJ5 ;COMMON CODE
;STILL FTDEC20 & IFE FTFILE
;HERE IF INSTRUCTION FOLLOWED BY ERJMP
DOITJ: SKIPGE I.NXIT ;IF DANGEROUS INSTRUCTION THEN
PUSHJ P,TTYLEV ;THEN RESTORE TTY ET AL
IFN FTEXEC,<PUSHJ P,RSTAC> ;ENSURE RIGHT CONTEXT ACS
JSR SWAP ;SWAP TO USER CONTEXT
XCT I.NST ;EXECUTE THE INSTRUCTION
ERJMP DOITJ3 ;CATCH ANY ERRORS
DOITJ1: MOVEM T,SAFETY ;HOLD T FOR MOMENT
MOVSI T,FECJS ;FLAG ERCAL/JMP DIDN'T
IORM T,FLAGS ;SET IN $X FLAGS
MOVEI T,2 ;USER PC INCREMENTS BY 2
;NOTE THAT WE HAVE NO WAY OF DETERMINING
;IF THE ERCAL/JMP EVEN GOT EXECUTED -
;CONSIDER MOVE/ERJMP VERSUS SKIPA/ERJMP
JRST DOITX4 ;COMMON CODE
DOITJ3: MOVEM T,SAFETY ;HOLD T FOR MOMENT
MOVSI T,FEJJ ;FLAG ERJMP JUMPED
DOITJ5: IORM T,FLAGS ;SET IN $X FLAGS
MOVEI T,1 ;USER PC INCREMENTS BY ONE
JRST DOITX4 ;COMMON CODE
> ;END IFN FTDEC20
DOITX: SKIPGE I.NXIT ;IF DANGEROUS INSTRUCTION THEN
PUSHJ P,TTYLEV ;RESTORE TTY ET AL
IFN FTEXEC,<PUSHJ P,RSTAC> ;ENSURE PROPER CONTEXT AC BLOCK
SETZM SKPCT ;[211] NOTE NUMBER OF SKIPS
JSR SWAP ;SWAP TO USER CONTEXT
DOITX0: XCT I.NST ;EXECUTE THE INSTRUCTION
;(IF IN EXEC MODE THIS MAY BE PXCT)
REPEAT SKPMAX,<AOS SKPCT> ;[211] NOTE COUNT OF SKIPS
MOVEM T,SAFETY ;SAVE USER T
MOVEI T,SKPMAX + 1 ;[211] MAX AMOUNT CAN BE SKIPPED
SUB T,SKPCT ;[211] MINUS THOSE NOT SKIPPED
DOITX4: ADD T,PCWRD ;ADJUST USER PC ACCORDINGLY
HRRM T,PCWRD ;SET NEW USER PC
MOVE T,SAFETY ;[211] RESTORE T
;STILL IFE FTFILE
;HERE AFTER SIMULATING OR EXECUTING INSTRUCTION. PERFORM REQUIRED PRINTOUT.
NOSKIP: JSR SWAP ;RESTORE DDT CONTEXT
SETOM LASTPG ;IN CASE PAGE FAULT EVEN ON "SAFE" INST.
SKIPGE I.NXIT ;IF WAS DANGEROUS INSTRUCTION
PUSHJ P,TTYRET ;THEN RESTORE DDT TTY MODES
JRST TELLX
TELL: EXCH F,FLAGS ;GET DDT'S FLAGS
TELLX: SKIPL T,I.NJMP ;UNCONDITIONAL JUMP ADDRESS SPECIFIED?
MOVEM T,PCWRD ;YES, BECOMES NEW USER PC
TXNE F,CCF ;IF $$X, DON'T PRINT ANYTHING
JRST NXTIT
EXCH F,FLAGS ;RESTORE $X'S FLAGS
PUSH P,SCH ;SAVE CURRENT OUTPUT MODE
TLNE F,FLA ;FLOATING AC?
MOVEI SCH,TFLOT ;YES, SETUP TO OUTPUT IN FLOATING PT
TLNE F,BPA ;BYTE POINTER AC?
MOVEI T,TBPNT ;YES, SET TO TYPE BYTE POINTER
TLNE F,FAC ;AC TO BE PRINTED?
PUSHJ P,FAC0 ;YES, DO IT
TLNE F,DFAC ;INST USE 2 ACS?
PUSHJ P,DBL0 ;YES, PRINT LOW-ORDER AC
TLNE F,QFAC ;INST USE 4 ACS?
PUSHJ P,QDBL0 ;YES, PRINT LOWER-ORDER ACS
TLNE F,FLG ;INSTRUCTION ACCESS THE FLAGS?
PUSHJ P,FLG0 ;YES, PRINT FLAGS
MOVE SCH,(P) ;RESTORE OLD MODE
TLNE F,FLE ;FLOATING MEMORY OPERAND?
MOVEI SCH,TFLOT ;YES, SETUP FLTG OUTPUT
TLNE F,BPE ;C(E) A BYTE POINTER
MOVEI SCH,TBPNT ;YES - TYPE AS SUCH
TLNE F,IMM ;IMMEDIATE MODE?
PUSHJ P,IMM0 ;YES, JUST PRINT E
TLNE F,EA ;MEM REF INST?
PUSHJ P,PEA ;YES, PRINT C(E)
TLNE F,DEA ;DOUBLE-WORD MEM OPERAND?
PUSHJ P,DEA0 ;YES, OUTPUT 2ND WORD
TLNE F,QEA ;QUAD-WORD MEM OPERAND?
PUSHJ P,QDEA0 ;YES, PRINT 3RD AND 4TH WORDS
POP P,SCH ;RESTORE CURRENT OUTPUT MODE
TLNN F,EA2 ;SECOND EFFECTIVE ADDRESS?
JRST NOSKIQ ;NO
MOVE T,I.NEA2 ;YES - GET E(C(E))
EXCH T,I.NSTE ;E:=E(C(E))
MOVEM T,I.NEA2 ;REMEMBER E
TLNE F,IMM2 ;SECOND E IMMEDIATE?
PUSHJ P,IMM0 ;YES - TYPE E(C(E))
TLNN F,IMM2 ;SECOND E IMMEDIATE?
PUSHJ P,PEA ;NO - TYPE E(C(E))/C(E(C(E)))
MOVE T,I.NEA2 ;GET FIRST E BACK
EXCH T,I.NSTE ;AND RESTORE TO RIGHTFUL PLACE(S)
NOSKIQ: EXCH F,FLAGS ;RESTORE DDT FLAGS
PUSHJ P,TCRLF ;OUTPUT CRLF
;STILL IFE FTFILE
;NOW TEST WHETHER TO CONTINUE, AND PRINT NEXT INST IF REQUIRED.
NXTIT:
IFN FTDEC20,< ;HANDLE TOPS-20 ERCAL/ERJMP
EXCH F,FLAGS ;BACK TO $X FLAGS
TLZE F,FECJ ;FORCED ERCAL TO JUMP?
JRST NXTIT2 ;YES
TLZN F,FEJJ ;DID AN ERJMP JUMP?
JRST NXTIT6 ;NO
SKIPA T,[<<JRST>_<^L<@>-^D36>>] ;FAKE AN ERJMP
NXTIT2: MOVEI T,<<PUSHJ 17,>_<^L<@>-^D36>> ;FAKE AN ERCAL
DPB T,[POINT 13,I.NECJ,12] ;FAKE OUT THE ERCAL/ERJMP
MOVE R,I.NPC ;PC OF ORIGINAL USER INSTRUCTION
HRRI R,1(R) ;ADVANCE BY ONE (ADDR OF ERCAL/ERJMP)
MOVEM R,I.NPC ;NOTE NEW INSTRUCTION PC
SKIPL I.REP ;INDEFINITE $$X'ING?
MOVEM R,LOCSAV ;NO, UPDATE LOCSAV TOO
EXCH F,FLAGS ;BACK TO DDT FLAGS
TXNE F,CCF ;$$X MODE?
JRST NXTIT4 ;YES, DON'T TYPE ANYTHING
MOVE T,R ;ADDRESS OF ERCAL/ERJMP INTO T
PUSHJ P,PINST ;SHOW USER WHAT WE ARE ABOUT TO DO
PUSHJ P,TCRLF ;<CR><LF>
NXTIT4: EXCH F,FLAGS ;BACK TO $X FLAGS
MOVE R,I.NPC ;GET R BACK
MOVE T,I.NECJ ;FETCH FAKE ERCAL/ERJMP
JRST $X03 ;AND GO SIMULATE THE REAL THING
NXTIT6: EXCH F,FLAGS ;BACK TO DDT FLAGS
> ;END OF IFN FTDEC20
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;STILL IFE FTFILE
AOSN I.PXC ;CALL FROM $PX?
JRST CPOPJ1 ;YES, RETURN NOW, QUIETLY
MOVE T,PCWRD ;FETCH NEW PC
XMOVEI W1,XEC1 ;INTERNAL LIMITS
XMOVEI W2,XEC2 ;OF INSTR$X RETURNS
CAML T,W1 ;DID WE JUST $X A RETURN FROM
CAML T,W2 ;(E.G.) PUSHJ P,SUBRTN$X WHICH BREAKPOINTED?
JRST NXTIT8 ;NO
SETZM BPTIP ;YES, NO LONGER BREAKPOINT IN PROGRESS
JRST (T) ;JUST QUIT (DON'T $X DDT ITSELF)
NXTIT8: SKIPL I.REP ;INDEFINITE $$X IN PROGRESS?
JRST NXT0 ;NO
CAML T,LLIMIT ;YES, IS USER PC NOW WITHIN
CAMLE T,ULIMIT ;STOPPING LIMITS?
CAIA ;NO.
JRST $XQUIT ;YES, STOP ITERATION NOW
NXT0: PUSHJ P,LISCK ;HAS USER TYPED ANYTHING?
JRST NXT1 ;NO, CONTINUE
JRST $XQUIT ;YES, ABORT THE $$X
MOVEI W1,[ASCIZ\Executing: \] ;YES, NICE TEXT
PUSHJ P,TSTRG ;TELL USER
MOVE T,PCWRD ;GET THE NEW $X PC
PUSHJ P,LI1 ;AND TELL USER THAT TOO
PUSHJ P,TCRLF ;CAP OFF LINE
JRST NXT1 ;AND CONTINUE $X'ING
;STILL IFE FTFILE
$XQUIT: SETZM I.REP ;YES, STOP ITERATION BY ZEROING COUNTER
TXZ F,CCF ; AND CLEARING CONTROL FLAG
NXT1: TXNE F,CCF ;$$ STILL IN EFFECT?
JRST NXT2 ;YES, DON'T PRINT ANYTHING
IFN FTDEC20,<
EXCH F,FLAGS ;GET $X FLAGS AGAIN
TLZN F,FECJS ;NEED TO INDICATE ERCAL/ERJMP?
JRST NXT1A ;NO, CONTINUE
EXCH F,FLAGS ;BACK TO DDT FLAGS
MOVEI W1,[ASCIZ "<ERSKP>"] ;MESSAGE
JRST NXT1D ;JOIN COMMON TYPEOUT CODE
NXT1A: EXCH F,FLAGS ;BACK TO DDT FLAGS
> ;END OF IFN FTDEC20
MOVE T,PCWRD ;NO, GET CURRENT PC AGAIN
MOVE W1,LOCSAV ;AND OLD PC
HRRI W1,1(W1) ;INCREMENT OLD PC
CAMN T,W1 ;DID PC SIMPLY GO TO PC+1?
JRST NXT1P ;YES--JUST CONTINUE
MOVE W2,W1 ;W1:=LOWER LIMIT
ADDI W2,SKPMAX ;W2:=UPPER LIMIT
CAML T,W1 ;IS THE NEW USER PC
CAMLE T,W2 ;WITHIN "SKIP" RANGE?
JRST NXT1C ;NO, GO TYPE <JUMP>
SUB T,W1 ;GET COUNT OF SKIPS
PUSH P,T ;SAVE FOR ITERATION
MOVEI W1,[ASCIZ "<SKIP"] ;SKIP
PUSHJ P,TSTRG ;TYPE IT
SOSG 0(P) ;MULTIPLE SKIPS?
JRST NXT1B ;NO, JUST CLOSE
PUSHJ P,TSPC ;TYPE A SPACE
MOVE T,0(P) ;GET # BACK
ADDI T,"0"+1 ;TO ASCII, COMPENSATE FOR SOSG
PUSHJ P,TOUT ;TYPE # OF SKIPS
NXT1B: POP P,0(P) ;CLEAN UP STACK
MOVEI T,">" ;CLOSE OFF SKIP MESSAGE
PUSHJ P,TOUT ;TYPE IT
JRST NXT1E ;COMMON CODE TO END LINE
NXT1C: MOVEI W1,[ASCIZ "<JUMP>"] ;JUMP
NXT1D: PUSHJ P,TSTRG ;SAY IT
NXT1E: PUSHJ P,TCRLF ;ADD CRLF
NXT1P: MOVE T,PCWRD ;FETCH CURRENT PC AGAIN
PUSHJ P,PINST ;PRINT INSTRUCTION ABOUT TO BE EXECUTED
SKIPE I.REP ;ARE WE STILL LOOPING?
PUSHJ P,TCRLF ;YES, PRINT CRLF AFTER INST
NXT2: SKIPE I.REP ;SKIP IF REPEAT COUNTER IS ZERO
PJRST $X01 ;NONZERO, REPEAT $X CYCLE AGAIN
AOS (P) ;TIME TO RETURN, MARK SUCCESSFUL COMPLETION
PJRST TTYCLR ;FLUSH ANY WAITING INPUT CHARACTERS
; AND RETURN TO $X COMMAND
;STILL IFE FTFILE
;OUTPUT ROUTINES
;ROUTINE TO PRINT THIRD AND FOURTH ACCUMULATORS
QDBL0: PUSHJ P,DBL0 ;PRINT ANOTHER AC
;AND FALL INTO PRINTING FOURTH AC
;ROUTINE TO PRINT SECOND ACCUMULATOR
DBL0: AOS T,I.NSTAC ;INCREMENT AC NUMBER
TRZA T,777760 ;ENSURE 17 WRAPS AROUND TO 0
;ROUTINE TO PRINT CONTENTS OF ACCUMULATOR
FAC0: MOVE T,I.NSTAC ;FETCH AC NUMBER
JRST PEA2
;ROUTINE TO PRINT THE FLAGS
FLG0: PUSHJ P,TTAB ;PRINT TAB
MOVE T,PCWRD ;GET NEW INSTRUCTION PC
TLNE T,-1 ;USER PC IN NON-ZERO SECTION?
MOVE T,PCFLG ;YES, GET FULL WORD PC FLAGS
HLRZ T,PCFLG ;NO, GET HALF WORD PC FLAGS
PJRST TOC ;AND OUTPUT PC FLAGS
;ROUTINE TO PRINT JUST E FOR AN IMMEDIATE MODE INSTRUCTION
IMM0: PUSHJ P,TTAB ;PRINT TAB
MOVE T,I.NSTE ;FETCH E
TLNN F,XIMM ;WANT ALL 30 BITS?
TLZ T,-1 ;NO, JUST TYPE 18 BITS
TLNE F,FLE ;FLTG PT MEM OPERAND?
HRLZ T,T ;YES, IMMEDIATE USES E,,0
IMM1: EXCH F,FLAGS ;RESTORE DDT FLAGS
PUSHJ P,CONSYM ;OUTPUT CONTENTS OF T
JRST PEA6 ;RESTORE $X FLAGS AND RETURN
;STILL IFE FTFILE
;ROUTINE TO PRINT 3RD AND 4TH MEMORY OPERANDS
QDEA0: PUSHJ P,DEA0 ;PRINT 3RD MEMORY OPERAND
;AND FALL INTO PRINTING FOURTH OPERAND
;ROUTINE TO PRINT 2ND MEMORY OPERAND
DEA0: MOVE T,I.NSTE ;FETCH ADDRESS OF OPERAND
HRRI T,1(T) ;ADVANCE TO NEXT ONE
MOVEM T,I.NSTE ;SAVE FOR EVEN MORE CALLS
;ROUTINE TO PRINT MEMORY OPERAND
PEA: MOVE T,I.NSTE ;FETCH ADR OF MEM OPERAND
PEA2: EXCH F,FLAGS ;HERE FROM DBL0,FAC0
PUSH P,T ;SAVE ARG
PUSHJ P,TTAB ;OUTPUT TAB
POP P,T ;RESTORE ADR OF LOC TO BE PRINTED
PUSHJ P,LI1 ;PRINT ADR/ CONTENTS
PEA6: EXCH F,FLAGS ;RESTORE $X FLAGS
POPJ P,
;ROUTINE TO PRINT INSTRUCTION ALWAYS IN SYMBOLIC DESPITE CURRENT MODE
PINST: PUSH P,SCH ;SAVE CURRENT OUTPUT MODE
MOVEI SCH,PIN ;SET TO PRINT SYMBOLIC INST MODE
PUSHJ P,LI1 ;OUTPUT INST
POP P,SCH ;RESTORE CURRENT MODE
POPJ P,
;HERE TO PRINT A WORD IN BYTE POINTER FORMAT:
; P S [@][[Y](X) ! Y]
TBPNT: LDB T,[POINT 6,LWT,5] ;GET "P" BYTE FIELD
PUSHJ P,TOC ;TYPE OUT
PUSHJ P,TSPC ;FOLLOWED BY SPACE
LDB T,[POINT 6,LWT,11] ;SET "S" BYTE FIELD
PUSHJ P,TOC ;TYPE IT OUT
PUSHJ P,TSPC ;CAP OFF WITH ANOTHER SPACE
JRST PI4 ;GO DO I, X, AND Y FIELDS
> ;END IFE FTFILE FROM PAGES AGO
IFN FTFILE,<XEC==ERR>
SUBTTL COMMAND ROUTINES -- PUNCH PAPER TAPE
IFN FTPTP,<
;HERE ON ^R COMMAND - PUNCH OUT CORE
PUNCH: SKPEXC
JRST ERR ;PAPER TAPE STUFF ILLEGAL IN USER MODE
TXC F,FAF!QF
TXCE F,FAF!QF
JRST ERR ;ONE ARGUMENT MISSING
PUN2: ADDI T,1
HRRZM T,TEM1
SUB T,DEFV
JUMPLE T,ERR
PUN1: MOVEI T,4 ;PUNCH 4 FEED HOLES
PUSHJ P,FEED
TXNE F,CF ;PUNCH NON-ZERO BLOCKS?
JRST PUNZ ;YES
HRRZ R,DEFV
IORI R,37
ADDI R,1
CAMLE R,TEM1
MOVE R,TEM1
EXCH R,DEFV
MOVE T,R
SUB T,DEFV
HRL R,T
JUMPGE R,RET ;EXIT OR PUNCH
PBLK: MOVE T,R
SOS W,T ;INIT CHECKSUM
PUSHJ P,PWRD
PBLK1: PUSHJ P,FETCH
JRST ERR
ADD W,T
PUSHJ P,PWRD
AOBJN R,PBLK1
MOVE T,W
PUSHJ P,PWRD
JRST PUN1
;STILL FTPTP
;PUNCH NON-ZERO BLOCKS
PUNZ0: AOS DEFV ;LOOK AT NEXT WORD
PUNZ: HRRZ W,DEFV ;ENTER HERE - GET STARTING ADDRESS
MOVE R,W
SUB W,TEM1 ;CALCULATE NEGATIVE LENGTH
HRL R,W ;SET UP AOBJN POINTER
JUMPGE R,RET ;FINISHED?
CAMG R,[XWD -40,0] ;BLOCK LONGER THAN 40?
HRLI R,-40 ;YES, FIX IT UP
MOVSI W1,400000 ;W1 NEGATIVE MEANS FLUSH 0 WORDS
PUNZ2: PUSHJ P,FETCH ;GET WORD FROM MEMORY
JRST ERR
JUMPE T,[AOJA W1,PUNZ4] ;IF WORD IS 0, INDEX 0 WORD COUNTER
MOVEI W1,0 ;CLEAR 0 WORD COUNTER
PUNZ4: JUMPL W1,PUNZ0 ;FLUSH 0 WORD, GET ANOTHER
CAIL W1,3 ; NOSKIP FOR 3RD 0 WORD AFTER NON 0 WORD
AOSA R ;ADVANCE R TO LAST ADR+1
AOBJN R,PUNZ2
ADD W1,DEFV ;CALCULATE DEFV-R+W1=-WORD COUNT
SUB W1,R
HRLM W1,DEFV ;PUT -WC IN LEFT HALF OF FA
EXCH R,DEFV ;SAVE ADR FOR NEXT BLOCK, GET POINTER
JRST PBLK
;STILL FTPTP
;HERE ON $J COMMAND -- PUNCH END (START) BLOCK
BLKEND: SKPEXC
JRST ERR
TXNN F,QF ;BLOCK END
MOVE T,[JRST 4,DDT]
TXNN T,777B8 ;INSERT JRST IF NO OPCODE
TXO T,<JRST>
PUSH P,T
MOVEI T,20
PUSHJ P,FEED
POP P,T
PUSHJ P,PWRD
PUSHJ P,PWRD ;EXTRA WORD FOR READER TO STOP ON
MOVEI T,400
JRST LOAD2
;STILL FTPTP
;COMMON SUBROUTINES USED BY ALL PAPER TAPE CODE
;PUNCH A WORD ROUTINE
PWRD: MOVEI W1,6
PWRD2: ROT T,6
CONSZ PTP,20
JRST .-1
CONO PTP,50
DATAO PTP,T
SOJG W1,PWRD2
POPJ P,0
;PUNCH NULLS (FEED) ROUTINE
FEED: CONSZ PTP,20
JRST .-1
CONO PTP,10
DATAO PTP,FEED1
SOJN T,FEED
FEED1: POPJ P,0 ;ADDRESS USED AS A CONSTANT
> ;END IFN FTPTP
IFE FTPTP,<BLKEND==<PUNCH==ERR>>
SUBTTL COMMAND ROUTINES -- WATCHING
WATCH: TXZE F,FAF!SAF!Q2F ;WE TAKE ONLY A SINGLE ARGUMENT
JRST ERR ;AND USER TYPED SOMETHING ELSE
TXNN F,QF ;USER TYPE EXPLICIT ADDRESS TO WATCH?
MOVE T,LLOCO ;NO, USE LAST LOCATION OPENED
MOVEM T,WTCHA ;SAVE ADDRESS
PUSHJ P,TCRLF ;START A NEW LINE
MOVE R,WTCHA ;GET ADDRESS TO BE WATCHED
PUSHJ P,FETCH ;GET IT
JRST ERR ;ADDRESSING ERROR
JRST WATCH3 ;AND TYPE IT OUT
;LOOP LOOKING AT THE WORD, WATCHING FOR A CHANGE
WATCH1:
IFN FTDEC10,< ;TOPS-10 QUICK NAP
MOVEI T,0 ;0 SECONDS = 1 CLOCK TICK
IFN FTEXEC,<SKPEXC> ;BUT NO MONITOR CALLS IN EXEC MODE
SLEEP T, ;PAUSE A MOMENT
> ;END IFN FTDEC10
IFN FTDEC20,< ;TOPS-20 QUICK NAP
MOVEI T1,^D16 ;16 MILLISECONDS = 1 CLOCK TICK
IFN FTEXEC,<SKPEXC> ;BUT NO MONITOR CALLS IN EXEC MODE
DISMS% ;PAUSE A MOMENT
> ;END IFN FTDEC20
MOVE R,WTCHA ;ADDRESS AGAIN
PUSHJ P,FETCH ;READ IT
JRST ERR ;BLETCH - THE WORD WENT AWAY
CAMN T,WTCHW ;HAS THE WORD CHANGED?
JRST WATCH5 ;NO
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
WATCH3: MOVEM T,WTCHW ;SAVE NEW WORD VALUE
MOVE T,R ;GET WORD ADDRESS
PUSHJ P,PADR ;AND PRINT IT
MOVEI W1,[ASCIZ\/ \] ;SEPARATOR TEXT TO
PUSHJ P,TSTRG ;SEPARATE ADDRESS AND ITS CONTENTS
MOVE T,WTCHW ;GET THE NEW WORD VALUE
PUSHJ P,CONSYM ;AND TYPE IT OUT TOO
PUSHJ P,TCRLF ;CAP OFF THE LINE
SETOM WTCHC ;AND DO A LISTEN
WATCH5: SOSL WTCHC ;TIME FOR A LISTEN?
JRST WATCH1 ;NO, JUST KEEP WATCHING
MOVEI W,^D60 ;YES, RESET LISTEN COUNTER
MOVEM W,WTCHC ; . . .
PUSHJ P,LISCK ;ANYTHING TYPED?
JRST WATCH1 ;NO, KEEP WATCHING
JRST DD1 ;YES, ABORT THE WATCH
;HERE TO ISSUE "STATUS" WITHOUT ABORTING THE WATCH
MOVEI W1,[ASCIZ\Watching: \] ;NICE TEXT
PUSHJ P,TSTRG ;TYPE IT OUT
MOVE T,WTCHA ;CURRENT ADDRESS
PUSHJ P,LI1 ;TYPE IT OUT
PUSHJ P,TCRLF ;CAP OFF TEXT MESSAGE
MOVE T,LWT ;GET THE DISPLAYED CONTENTS
MOVEM T,WTCHW ;AND SAVE IT AS THE LAST VALUE SEEN
JRST WATCH1 ;LOOP BACK AND CHECK AGAIN
SUBTTL COMMAND ROUTINES -- SEARCHING
EFFEC: MOVSI R,(CAIE T,0) ;FAILS IF ANY BITS DIFFER
TXO F,LTF ;FLAG EFFECTIVE ADDRESS SEARCH
JRST WORD1 ;ENTER MAIN SEQUENCE
NWORD: SKIPA R,[CAIN T,0] ;NOT-WORD, FAILS IF ALL BITS SAME
WORD: MOVSI R,(CAIE T,0) ;WORD SEARCH, FAILS IF ANY BITS DIFFER
TXZ F,LTF ;INDICATE NO EFFECTIVE ADDR SEARCH
WORD1: MOVEM R,SEAXCT ;[224] SET MODE "FLAG" (XCT'ED AT SEAR2)
TXNN F,CCF!Q2F ;TWO <ESC>'S OR SECOND QUANTITY?
TXZN F,QF ;[224] QUANTITY TO SEARCH FOR TYPED?
JRST ERR ;SYNTAX ERROR
SETCAM T,WRD ;SAVE SO AS TO NOT FIND IN SEARCH
; MOVSI T,FRASE-DEN-1 ;PREVENT TYPE OUT OF DDT PARTS
MOVSI T,-6 ;*****TEMP***** AVOID MACRO BUG WITH MDDT
SETCMM FRASE(T) ;COMPLEMENT SO WON'T BE MATCHED
AOBJN T,.-1 ;ONE BY ONE
TXZ F,STF ;DO NOT SUPPRESS TYPEOUT (IN LI1)
MOVE T,ULIMIT ;END ADDRESS OF SEARCH RANGE
TXNE F,SAF ;WAS GIVEN EXPLICITLY?
TXO F,QF ;YES, SIMULATE A $Q TYPED
PUSHJ P,SETUP ;SETUP DEFAULT LIMITS
PUSHJ P,TCRLF ;CLEAN OUTPUT
PUSHJ P,PSHLLC ;PRESERVE PC SEQUENCE
;FALL INTO MAIN SEARCH LOOP ON NEXT PAGE
;FALL HERE FROM PREVIOUS PAGE
SEAR1: CAMLE R,ULIMIT ;REACHED END OF SEARCH LIMIT?
JRST SEARFN ;YES, END OF SEARCH
PUSHJ P,FETCH ;GET CURRENT WORD TO SEE IF IT MATCHES
JRST [MOVEI R,777 ;FETCH FAILED, BUMP TO NEXT PAGE
IORB R,LLIMIT ;PUT AT BOTTOM OF NONEX PAGE
JRST SEAR2A] ;CONTINUE SEARCH
TXNN F,LTF ;CHECK FOR EFFECTIVE ADDRESS SEARCH
JRST SEAR1B ;NORMAL WORD SEARCH
HLLZ S,LLIMIT ;EFFEC ADR - PRESET CURRENT SECTION
PUSHJ P,CEFFIX ;CALCULATE EFFECTIVE ADDRESS
JRST SEAR2A ;SKIP THIS WORD IF MEMORY READ ERROR
SEAR1B: EQV T,WRD ;FLIP SOME BITS
TXNN F,LTF ;EFFECTIVE ADDRESS OR WORD SEARCH?
AND T,MSK ;WORD SEARCH, CLEAR EXCLUDED BITS
SEAR2: XCT SEAXCT ;DO WE HAVE A MATCH?
JRST SEAR2A ;NO, ADVANCE TO NEXT LOCATION
MOVE T,LLIMIT ;GET MATCHED ADDRESS AGAIN
PUSHJ P,LI1 ;CALL REGISTER EXAMINATION LOGIC TO TYPE OUT
PUSHJ P,TCRLF ;POSITION TO NEXT LINE
PUSHJ P,PSHLLC ;SAVE CURRENT MATCH ON "STACK"
SETCMM LWT ;DON'T MATCH DDT'S INNARDS
SETCMM TEM ; DITTO
AOS R,LLIMIT ;[224] GET NEXT ADDRESS
JRST SEAR2B ;[224] AND ALWAYS DO A LISTEN
SEAR2A: AOS R,LLIMIT ;GET NEXT LOCATION
TRNN R,777 ;CHECK LISTEN ONLY ONCE PER PAGE
SEAR2B: PUSHJ P,LISCK ;ANYTHING TYPED?
JRST SEAR1 ;NO, KEEP SEARCHING
JRST SEARFN ;YES, ABORT THE SEARCH
;YES (A "?"), LIST STATUS
;HERE TO ISSUE "STATUS" WITHOUT ABORTING THE SEARCH
MOVEI W1,[ASCIZ\Searching: \] ;NICE TEXT
PUSHJ P,TSTRG ;TYPE IT OUT
MOVE T,R ;CURRENT ADDRESS
PUSHJ P,LI1 ;TYPE IT OUT
PUSHJ P,TCRLF ;CAP OFF TEXT MESSAGE
MOVE R,LLIMIT ;RESTORE R (=CURRENT ADDRESS)
JRST SEAR2B ;LOOP BACK AND CHECK AGAIN
;HERE AT THE END OF THE SEARCH - FOR ANY REASON
SEARFN: SETCMM LWT ;COMPLEMENT BITS BACK AND STOP SEARCH
SUBI R,1 ;BACKUP R TO LAST WORD ADDRESS
MOVEM R,LLOC ;SET "." TO LAST WORD SEARCHED
JRST DD1
SUBTTL COMMAND ROUTINES -- COMMAND FILE INPUT
IFN FTDEC10,<
;$Y -- READ COMMAND FILE
;$$Y -- READ SYMBOL FILE (NOT YET IMPLEMENTED)
IFN FTYANK,<
TAPIN: SETZM COMAND ;IN CASE ISSUED FROM COMMAND FILE
IFN FTEXEC,< SKPEXC ;SKIP IF EXEC MODE
JRST UTAPIN ;USER MODE
CONSO PTR,400 ;TAPE IN READER?
JRST ERR ;NO - ERROR
SETZM EPTPTR ;YES. INDICATE START READING IN
SETOM COMAND ;SHOW THERE IS A COMMAND FILE
JRST DD1 ;TYPE <CR><LF> AND DO COMMANDS
> ;END IFN FTEXEC
UTAPIN: TXNN F,QF ;USER TYPE OLD WAY?
JRST TAPIN4 ;NO, PROMPT FOR FILE SPEC
SETZM FSBLK ;CLEAR SPEC AREA
MOVE R,[FSBLK,,FSBLK+1] ;BLT POINTER TO
BLT R,FSBLK+FSLEN-1 ;ZERO FILE SPEC SCAN AREA
MOVEM T,FSFIL ;TAKE HIS FILENAME
PUSHJ P,TCRLF ;GIVE A <CR><LF> FOR NEATNESS
MOVX TT,FS$NAM ;SAY HE TYPED IN A FILENAME
MOVEM TT,FSBLK ;BUT NOTHING ELSE
JRST TAPIN6 ;AND GO DEFAULT TO DSK:.DDT[-]
;HERE TO PROMPT USER FOR FULL FILE SPECIFICATION
TAPIN4: TMSG <
File: > ;PROMPT USER
MOVEI S,TAPSWT ;$Y SWITCHES TABLE
SETZM YASWF ;INITIALIZE SWITCHES
PUSHJ P,FSCAN ;READ FILE SPEC
PJRST TTYCLR ;ERROR, GIVE UP
SKIPN TT,FSBLK ;ANYTHING TYPED?
POPJ P, ;NO, JUST RETURN
TAPIN6: MOVSI T,'DSK' ;DEFAULT DEVICE
TXNN TT,FS$DEV ;EXPLICIT DEVICE?
MOVEM T,FSDEV ;NO, USE DEFAULT
MOVSI T,'DDT' ;DEFAULT EXTENSION FOR COMMAND FILE
TXNE F,CCF ;COMMAND OR SYMBOL FILE?
MOVSI T,'SYM' ;SYMBOL FILE DEFAULT EXTENSION
TXNN TT,FS$EXT ;EXPLICIT EXTENSION?
MOVEM T,FSEXT ;NO, USE DEFAULT
MOVEI T,[YFLLEN,,YFLBLK ;LEN,,ADR OF FILOP. BLOCK
YLKLEN,,YLKBLK ;LEN,,ADR OF LOOKUP BLOCK
YPTLEN,,YPTBLK] ;LEN,,ADR OF PATH. BLOCK
PUSHJ P,FSFSET ;SETUP FILOP. BLOCK
HALT ERR ;INTERNAL ERROR
MOVE T,[400000+CM,,.FORED] ;READ FILE ON CHANNEL CM
MOVEM T,YFLBLK+.FOFNC ;SETUP FUNCTION WORD
MOVEI T,.IOASL ;ASCII MODE
TXNE F,CCF ;SYMBOL FILE?
MOVEI T,.IODMP ;YES, USE DUMP I/O
MOVEM T,YFLBLK+.FOIOS ;SETUP "OPEN" BLOCK I/O STATUS
MOVEI T,CBUF ;BUFFER HEADER
MOVEM T,YFLBLK+.FOBRH ;SET IN OPEN BLOCK
MOVEI T,1 ;ONLY WANT ONE INPUT BUFFER
MOVEM T,YFLBLK+.FONBF ;SET IT ALSO
MOVEI R,YBFBUF ;COMMAND BUFFER (PRE-ALLOCATED)
EXCH R,.JBFF ;PERSUADE MONITOR TO PUT BUFFER THERE
MOVE T,[YFLLEN,,YFLBLK] ;FILOP. POINTER TO
FILOP. T, ;OBTAIN INPUT FILE
JRST [EXCH R,.JBFF ;RESET .JBFF
JRST FSEFFF] ;TYPE FILOP. ERROR
EXCH R,.JBFF ;RESTORE .JBFF
TXNE F,CCF ;SYMBOL FILE?
JRST TAPSY ;YES, GO READ IN THEN
CAILE R,YBFBUF+YBFSIZ ;MAKE SURE BUFFER NOT TOO BIG
JRST ERR ;WAS, FORGET IT
SETZM CHINP ;FLAG WE
SETZM CHINC ;NOW HAVE
SETOM COMAND ;COMMAND FILE
JRST DD1 ;TYPE <CR><LF> AND DO COMMANDS
;HERE TO HANDLE SYMBOL FILES
TAPSY: JRST ERR ;CODE NOT YET WRITTEN . . .
;$Y SWITCHES
TAPSWT: SETOM YASWF ;A - ABORT ON COMMAND ERRORS
JRST FSEILS ;B - ILLEGAL
JRST FSEILS ;C - ILLEGAL
JRST FSEILS ;D - ILLEGAL
JRST FSEILS ;E - ILLEGAL
JRST FSEILS ;F - ILLEGAL
JRST FSEILS ;G - ILLEGAL
JRST FSEILS ;H - ILLEGAL
JRST FSEILS ;I - ILLEGAL
JRST FSEILS ;J - ILLEGAL
JRST FSEILS ;K - ILLEGAL
JRST FSEILS ;L - ILLEGAL
JRST FSEILS ;M - ILLEGAL
JRST FSEILS ;N - ILLEGAL
JRST FSEILS ;O - ILLEGAL
JRST FSEILS ;P - ILLEGAL
JRST FSEILS ;Q - ILLEGAL
JRST FSEILS ;R - ILLEGAL
JRST FSEILS ;S - ILLEGAL
JRST FSEILS ;T - ILLEGAL
JRST FSEILS ;U - ILLEGAL
JRST FSEILS ;V - ILLEGAL
JRST FSEILS ;W - ILLEGAL
JRST FSEILS ;X - ILLEGAL
JRST FSEILS ;Y - ILLEGAL
JRST FSEILS ;Z - ILLEGAL
> ;END OF IFN FTYANK
> ;END IFN FTDEC10
IFE FTYANK,<TAPIN==ERR>
SUBTTL COMMAND ROUTINES -- MISCELLANEOUS COMMANDS
IFE FTFILE,<
;HERE ON AN $G COMMAND TO START AT USER'S ARGUMENT OR THE START ADDRESS
GO: SKIPE MAPFN ;STRAIGHT VIRTUAL ADDRESSING?
JRST ERR ;NO, DISALLOW
TXNE F,QF ;EXPLICIT START ADDRESS GIVEN?
JRST GO4 ;YES, GO USE IT
;NO START ADDRESS, MAKE A GUESS AT ONE
IFN FTEXEC,<
SKPUSR> ;OK IN EDDT IN USER MODE
IFN FTEXEC!FTMON,<
JRST ERR> ;NO SUCH COMMAND IN EDDT OR MDDT
IFN FTDEC20,<
MOVEI T1,.FHSLF
GEVEC% ;GET ENTRY VECTOR
HLRZ TT,T2 ;GET ITS LENGTH
CAIN TT,(JRST) ;TOPS10 FORMAT?
JRST GO2 ;YES
CAIL TT,1000 ;REASONABLE?
JRST ERR ;NO
HRRZ T,T2 ;SETUP FIRST LOCATION
TXNN F,Q2F ;SECOND QUANT? (I.E. $1G)
SETZM WRD2O ;NO, ASSUME ZERO
CAMG TT,WRD2O ;WITHIN RANGE?
JRST ERR ;NO
ADD T,WRD2O ;ADD OFFSET WITHIN VECTOR
JRST GO4 ;NOW HAVE ADDR IN T, GO START THERE
GO2:> ;END IFN FTDEC20
MOVEI R,.JBSA ;WHERE START ADDRESS LIVES
PUSHJ P,FETCH ;GO GET IT
JRST ERR ;OOPS
TLZ T,-1 ;FORM START ADDRESS ONLY
JUMPE T,ERR ;ILLEGAL IF RH(.JBSA) IS ZERO
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;FALL IN FROM ABOVE
;HERE WITH ADDRESS TO START AT IN T.
;WE LET RESTORE JUMP TO THE USER TO GET OUT OF DDT AS FAST AS POSSIBLE,
;IN CASE AN INTERRUPT IS PENDING.
GO4: PUSH P,T ;SAVE OVER TCRLF
PUSHJ P,TCRLF ;NEATNESS
IFN FTEXEC,<PUSHJ P,RSTAC> ;INSURE CORRECT AC BLOCK
PUSHJ P,INSRTB ;INSERT BREAKPOINTS
POP P,T ;RESTORE START ADDRESS
SKPNS0 ;IN SECTION 0?
TLNN T,-1 ;AND ADDRESS ISN'T?
JRST RESTOR ;NO, DO NORMAL THING
JRST RESTRX ;YES, USE XJRSTF EVEN IN SECTION 0
> ;END IFE FTFILE
IFN FTFILE,<GO==ERR>
;HERE ON AN $M COMMAND -- SET DDT CONTROL REGISTERS
MASK: TXNE F,QF
JRST MASK1
IFE FTFILE,<
TXZN F,Q2F ;[234] SECOND ARG TYPED?
TDZA TT1,TT1 ;[234] NO - DEFAULT TO SEARCH MASK
SKIPL TT1,WRD2D ;[234] YES - PICK UP MASK NUMBER
CAIL TT1,MSKMAX ;[234] WITHIN LEGAL LIMITS?
JRST ERR ;[234] NO - COMPLAIN AT USER
MOVEI T,@MSKADR(TT1) ;[234] YES - GET RELEVANT MASK ADDRESS
MASK2: MOVEI W,1
MOVEM W,FRASE1
JRST QUANIN
>
IFN FTFILE,<JRST ERR>
MASK1: TRZN F,Q2F ;[210] SECOND ARG TYPED?
TDZA TT1,TT1 ;[210] NO - DEFAULT TO SEARCH MASK
SKIPL TT1,WRD2D ;[210] YES - PICK UP MASK NUMBER
CAIL TT1,MSKMAX ;[213] LEGAL RANGE?
JRST ERR ;[210] NO - COMPLAIN AT USER
MOVEM T,@MSKADR(TT1) ;[210] YES - STORE NEW MASK
JRST RET
MSKADR: IFIW MSK ;[210] SEARCH MASK
IFIW TTYMSK ;[210] TTY FORMAT CONTROL MASK
IFIW SYMOFS ;[234] SYMBOL + OFFSET RANGE "MASK"
IFIW BYTMSK ;[235] BYTE TYPEOUT MASK
MSKMAX==.-MSKADR ;[210] MAX MASK "FUNCTION"
;HERE ON AN $Z COMMAND -- STORE DATA INTO MEMORY
ZERO: TXNE F,CCF ;$Z OR $$Z (OLD FORM)?
JRST ZEROLD ;$$Z - GO HANDLE OLD FORM
TXNE F,FAF ;MUST HAVE EXPLICIT LOWER
TXNN F,SAF ;AND UPPER ADDRESS LIMITS
JRST ERR ;DON'T - SYNTAX ERROR
TXNN F,QF ;EXPLICIT QUANTITY TYPED IN?
SETZM WRD ;NO, DEFAULT TO 0 THEN
SKIPL R,LLIMIT ;START ADDRESS
CAMLE R,ULIMIT ;MAKE SURE BEFORE END ADDRESS
JRST ERR ;ERROR
PUSHJ P,TCRLF ;NICE OUTPUT (IN CASE ^X ETC.)
PUSHJ P,PSHLLC ;SAVE PREVIOUS PC SEQUENCE
;LOOP DEPOSITING INTO EACH WORD BETWEEN LIMITS
ZERO2: MOVE T,WRD ;GET QUANTITY TO DEPOSIT
PUSHJ P,DEPMEM ;DEPOSIT INTO MEMORY
TROA R,PAGMSK ;CAN'T WRITE THIS PAGE
CAIA ;OK - SKIP TO NEXT WORD
IORM R,LLIMIT ;ADVANCE TO END OF THIS PAGE
AOS R,LLIMIT ;ADVANCE TO NEXT WORD
CAMLE R,ULIMIT ;AT END LIMIT YET?
JRST ZERO4 ;YES
TRNN R,PAGMSK ;START OF NEW PAGE?
ZERO3: PUSHJ P,LISCK ;YES, DO A LISTEN THEN
JRST ZERO2 ;KEEP GOING
JRST ZERO4 ;ABORT
MOVEI W1,[ASCIZ\Depositing: \] ;NICE TEXT
PUSHJ P,TSTRG ;TELL USER
MOVE T,R ;CURRENT LOCATION
PUSHJ P,LI1 ;TELL USER THAT TOO
PUSHJ P,TCRLF ;CAP OFF THE LINE
MOVE R,LLIMIT ;RESTORE R TO CURRENT LOCATION
JRST ZERO3 ;AND CHECK AGAIN
ZERO4: MOVEM R,LLOC ;SET NEW "." TO LAST LOCATION ZAPPED
PUSHJ P,TCRLF ;END OF LOOP DEPOSITING MEMORY
JRST DD1 ;RETURN
;HERE TO DO IT THE OLD WAY WHICH MAY GO AWAY ANYTIME
ZEROLD: PUSHJ P,SETUP
HRRZ S,@SYMP ;GET 1ST ADR OF SYMBOL TABLE
HLRE W1,@SYMP ;GET LENGTH OF SYM TABLE
SUB W1,S ;GET NEG OF LAST ADR
MOVNS W1 ;GET POS LAST ADR
MOVEI T,0 ;0 TO STORE IN MEMORY
ZEROL1: TRNN R,777760
JRST ZEROLR ;OK TO ZERO ACS
IFN FTDEC10,<
IFN FTEXEC,<
SKPUSR
>
IFN FTEXEC!FTFILE,<
JRST [CAIGE R,XZLOW
MOVEI R,XZLOW ;IN EXEC MODE, DON'T ZERO 20-40
JRST ZEROL3 ] >
>
IFE FTFILE,<
CAIGE R,ZLOW
MOVEI R,ZLOW ;DON'T ZERO 20 THRU ZLOW
ZEROL3: CAIL R,DDTBEG
CAILE R,DDTEND
JRST .+2
MOVEI R,DDTEND ;DON'T ZERO DDT
CAML R,S
CAMLE R,W1
JRST .+2
HRRZ R,W1 ;DON'T ZERO SYMBOL TABLE
>
IFN FTFILE,<
ZEROL3:>
ZEROLR: CAMLE R,ULIMIT ;ABOVE LIMITS?
JRST DD1 ;YES, STOP
PUSHJ P,DEPMEM ;DEPOSIT T
IFE FTFILE,<
TROA R,377777 ;
AOJA R,ZEROL1
TRNN R,400000 ;HI SEGMENT?
AOJA R,ZEROL1 ;NO, KEEP GOING
>
JRST DD1 ;FINISH
IFN FTFILE,<AOJA R,ZEROL1>
;SETUP (DEFAULT) LOWER AND UPPER LIMITS FOR $W AND $Z
SETUP: TXNE F,FAF ;LOWER LIMIT GIVEN?
SKIPA R,LLIMIT ;YES, PICK IT UP
IFE FTFILE,<HLLZ R,LLOC> ;NO, USE 000000 IN LOCAL SECTION
IFN FTFILE,<SETZ R,> ;NO, USE START OF FILE
MOVEM R,LLIMIT ;SET LOWER LIMIT WORD
MOVE T,ULIMIT ;UPPER LIMIT WORD
TXNE F,SAF ;UPPER LIMIT GIVEN?
JRST SETUP5 ;YES, PICK IT UP
IFE FTFILE,<HLLO T,LLOC> ;NO, USE 777777 IN LOCAL SECTION
IFN FTFILE,<
MOVE T,MAXSIZ ;NO, USE EOF
SUBI T,1 ;(MAXSIZ ONE TOO BIG FOR THIS CASE)
SKIPN FILING ;IF LOOKING AT MONITOR/MEMORY
JRST SETUP3 ;THIS IS UPPER LIMIT
SKIPN EXEFMT ;IF DATA FORMAT
JRST SETUP4 ;THEN UPPER LIMIT AT EOF
HLLO T,LLOC ;777777 IN CURRENT SECTION
SKIPE MAPFN ;PAGE MAPPING IN EFFECT?
JRST SETUP4 ;YES, UPPER LIMIT IN CURRENT SECTION
MOVE T,PGTLEN ;EXE FILE SANS MAPPING, MAX VIRT PAGE
LSH T,PG2WRD ;MAKE INTO WORD ADDRESS
SUBI T,1 ;LAST WORD OF LAST VIRTUAL PAGE
JRST SETUP4 ;BECOMES UPPER LIMIT
SETUP3: SKIPL MAPFN ;IF NOT PHYSICAL MEMORY
HLLO T,R ;THEN LIMIT TO SINGLE SECTION
> ;END OF IFN FTFILE
SETUP4: MOVEM T,ULIMIT ;SET UPPER LIMIT WORD
SETUP5: CAMLE R,T ;LIMITS IN A REASONABLE ORDER?
JRST ERR ;NO
POPJ P, ;YES, RETURN
;************** END OF COMMAND PROCESSING ROUTINES ***************
SUBTTL FILE SPECIFICATION PARSING AND ERROR ROUTINES
IFN FTDEC10&<FTFILE!FTYANK>,<
;FSCAN -- ROUTINE TO INPUT (PARSE) ONE FILE SPEC
;CALL IS:
;
; MOVEI S,<SWTABLE>
; PUSHJ P,FSCAN
; ERROR RETURN (MESSAGE ALREADY TYPED)
; OK RETURN, FSBLK FILLED IN
;
;WHERE <SWTABLE> IS THE ADDRESS OF A 26 (DECIMAL) WORD TABLE OF
;INSTRUCTIONS TO BE EXECUTED WHEN A SWITCH IS SEEN - THE FIRST
;WHEN "/A", THE SECOND ON "/B", ETC.
;
;THE AREA FSBLK HAS THE INPUT INFORMATION AS FOLLOWS:
;
; FSBLK: ;.NE. 0 IF NOT A BLANK LINE
; FS$SWT ;AT LEAST ONE SWITCH SPECIFIED
; FS$DEV ;DEVICE WAS SPECIFIED
; FS$NAM ;FILENAME WAS SPECIFIED
; FS$EXT ;EXTENSION WAS SPECIFIED
; FS$PTH ;PATH WAS SPECIFIED
; FSDEV: ;THE DEVICE SPECIFIED
; FSFIL: ;THE FILENAME SPECIFIED
; FSEXT: ;THE EXTENSION (RH .NE. 0 IF ANYTHING TYPED)
; FSPPN: ;THE PPN SPECIFIED
; FSSFD: ;THE SFD'S (UP TO 5)
;
;NOTE THAT THE BITS IN FSBLK ARE ARRANGED SUCH THAT FS$SWT IS THE
;SIGN BIT SO THAT A SKIPN WILL TEST IF ANYTHING WAS TYPED, A SKIPG
;IF ONLY A FILE SPEC TYPED, A SKIPL IF ANY SWITCHES TYPED.
;
;IF EXTENSION "UFD" WAS SPECIFIED THEN THE DIRECTORY SPECIFIED
;IS USED AS THE FILENAME AND [1,1] IS RETURNED AS THE DIRECTORY.
;
;AC "T" CONTAINS CHARACTER WHICH TERMINATED FILE SCAN.
;
;USES ACS T, TT, TT1, TT2
;STILL FTDEC10
FSCAN: SETZM FSBLK ;CLEAR START OF FILESPEC AREA
MOVE T,[FSBLK,,FSBLK+1] ;BLT POINTER TO
BLT T,FSBLK+FSLEN-1 ;CLEAR ALL OF FILE SPEC AREA
GETPPN T, ;READ IN DEFAULT PPN
JFCL ;(BLOODY JACCT BIT)
MOVEM T,MYPPN ;SAVE FOR PATH DEFAULTING
;TOP LEVEL PARSE LOOP TO READ FILE SPEC
FSCSPC: PUSHJ P,FSCSIX ;READ A SOMETHING OR OTHER
FSCSP1: CAIN T,":" ;DEVICE SPECIFIED?
JRST FSCDEV ;YES - GO STORE
JUMPE TT,FSCSP2 ;IF NO NAME, SKIP NAME SAVE
;IF GOT HERE, MUST BE FILENAME IN TT
SKIPE FSFIL ;FILENAME ALREADY SPECIFIED?
JRST FSEDFI ;YES - ERROR
MOVEM TT,FSFIL ;SAVE FILENAME AWAY
MOVX TT,FS$NAM ;FILENAME SEEN
IORM TT,FSBLK ;REMEMBER FOR OTHERS
FSCSP2: CAIN T,"." ;EXTENSION COMING UP?
JRST FSCEXT ;YES - READ IT IN
CAIN T,"[" ;PATH COMING UP?
JRST FSCPTH ;YES - READ IT IN
CAIN T,"/" ;SWITCH COMING UP?
JRST FSCSWT ;YES - GO SEE WHAT'S UP
CAIE T,.CHTAB ;RANDOM <TAB>?
CAIN T," " ;RANDOM SPACE?
JRST FSCSPC ;YES - JUST EAT IT, KEEP LOOKING
HLRZ TT1,FSEXT ;GET EXTENSION (IF ANY)
CAIE TT1,'UFD' ;USER FILE DIRECTORY?
JRST CPOPJ1 ;NO, ALL DONE
MOVE TT1,FSPPN ;YES, THEN THE DIRECTORY
MOVEM TT1,FSFIL ;IS REALLY THE FILE NAME
MOVE TT1,[1,,1] ;AND [1,1]
MOVEM TT1,FSPPN ;IS REALLY THE DIRECTORY
SETZM FSSFD ;DISALLOW ANY SFD'S
MOVX TT1,FS$NAM ;NOTE WE HAVE SEEN THE FILENAME
IORM TT1,FSBLK ;ALBEIT IN A STRANGE PLACE
JRST CPOPJ1 ;OK RETURN
;STILL FTDEC10
;HERE TO SET DEVICE NAME
FSCDEV: JUMPE TT,FSENDI ;NULL DEVICE ILLEGAL
SKIPE FSDEV ;DEVICE ALREADY SEPCIFIED?
JRST FSEDDI ;YES - ERROR
MOVEM TT,FSDEV ;SET NEW DEVICE NAME
MOVX TT,FS$DEV ;DEVICE SEEN
IORM TT,FSBLK ;REMEMBER FOR OTHERS
JRST FSCSPC ;CONTINUE PARSING
;HERE TO HANDLE EXTENSION COMING UP
FSCEXT: SKIPE FSEXT ;ALREADY SEEN EXTENSION?
JRST FSEDEI ;YES - ERROR
PUSHJ P,FSCSIX ;READ IN EXTENSION
HLLOM TT,FSEXT ;SET NEW EXTENSION
MOVX TT,FS$EXT ;EXTENSION SEEN
IORM TT,FSBLK ;REMEMBER FOR OTHERS TO SEE
SETZ TT, ;DON'T CONFUSE ANYBODY ELSE
JRST FSCSP1 ;SEE WHAT ELSE TO DO
;HERE TO READ IN A DIRECTORY PATH SPECIFICATION
FSCPTH: SKIPE FSPPN ;PATH ALREADY BEEN SPECIFIED?
JRST FSEDPI ;YES - ERROR
PUSHJ P,FSCOCP ;READ IN OCTAL PROJECT NUMBER
JRST FSEIPP ;ILLEGAL PROJECT/PROGRAMMER NUMBER
CAIN TT,0 ;EXPLICIT PROJECT NUMBER?
HLR TT,MYPPN ;NO - USE IMPLICIT LOGGED IN
HRLM TT,FSPPN ;SET UP
CAIE T,"," ;MUST BE COMMA HERE
JRST FSEIPP ;NO COMMA - ERROR
PUSHJ P,FSCOCH ;READ IN OCTAL PROGRAMMER
JRST FSEIPP ;ILLEGAL PROJECT/PROGRAMMER NUMBER
CAIN TT,0 ;EXPLICIT PROGRAMMER?
HRR TT,MYPPN ;NO - USE IMPLICIT LOGGED IN ONE
HRRM TT,FSPPN ;SET UP
MOVE TT2,[-6,,FSSFD] ;AOBJN POINTER FOR SFD'S
FSCPT5: CAIE T,"," ;MORE TO DO?
JRST FSCPT8 ;NO - END OF PATH
AOBJP TT2,FSETMS ;MAKE SURE HAVE ROOM
PUSHJ P,FSCSIX ;YES - READ IN NEXT SFD
JUMPE TT,FSENSI ;NULL SFD ILLEGAL
MOVEM TT,-1(TT2) ;REMEMBER AWAY IN PATH BLOCK
JRST FSCPT5 ;LOOP FOR NEXT SFD
FSCPT8: MOVX TT,FS$PTH ;PATH SEEN
IORM TT,FSBLK ;REMEMBER FOR OTHERS
JUMPE T,CPOPJ1 ;EOL IS VALID END OF PATH CHAR
CAIE T,"]" ;"]" IS ONLY OTHER VALID TERMINATOR
JRST FSEIPP ;FUNNY CHARACTER - CALL ERROR
JRST FSCSPC ;CONTINUE PARSING
;STILL FTDEC10
;HERE TO HANDLE (IN AN ELEMENTARY FASHION) SWITCHES
;SWITCHES WILL BE IDENTIFIED BY THEIR FIRST CHARACTER ONLY,
;ALTHOUGH THE ENTIRE "WORD" WILL BE READ IN ON G.P.'S
;
;ADDRESS IN S IS 26 (DECIMAL) ENTRIES FOR THE 26 POSSIBLE
;SWITCHES. EACH SWITCH ENTRY WILL BE AN INSTRUCTION TO BE
;XCT'ED BY THE SWITCH PROCESSOR. IF A "COMPLICATED" ROUTINE
;IS NEEDED TO HANDLE THE SWITCH THEN THE SWITCH ENTRY IN
;SWTBL SHOULD BE A PUSHJ TO THE ROUTINE TO HANDLE THAT PAR-
;TICULAR SWITCH, WHICH ROUTINE SHOULD RETURN CPOPJ0.
;
;UNUSED SWITCH ENTRIES SHOULD BE "JRST FSEILS"
FSCSWT: PUSHJ P,FSCSIX ;READ IN A SWITCH NAME
JUMPE TT,FSENWI ;NULL SWITCH ILLEGAL
LSH TT,-^D30 ;REDUCE TO SINGLE CHARACTER
JUMPE S,FSEILS ;IF NO SWITCHES THEN ALWAYS ERROR
CAIL TT,'A' ;IN RANGE
CAILE TT,'Z' ;I.E., ALPHA?
JRST FSEILS ;NO - ERROR
MOVEI TT1,-'A'(TT) ;GET SWITCH OFFSET (A = 0, ETC.)
ADDI TT1,(S) ;POINT INTO SWITCH TABLE PASSED US
XCT (TT1) ;DO SWITCH-SPECIFIC PROCESSING
MOVX TT,FS$SWT ;SWITCH SEEN
IORM TT,FSBLK ;REMEMBER FOR OTHERS
SETZ TT, ;DON'T CONFUSE THE ISSUE
JRST FSCSP1 ;CONTINUE PARSE
;STILL FTDEC10
;FSCSIX -- READ IN A SIXBIT WORD
;CALL IS:
;
; PUSHJ P,FSCSIX
; RETURN
;
;RETURNS SIXBIT WORD (LEFT JUSTIFIED) IN AC "TT" AND TERMINATING
;CHARACTER IN AC "T". ANY CHARACTERS AFTER THE FIRST SIX WILL BE
;IGNORED - I.E., TOSSED OUT.
;
;USES T, TT, TT1
FSCSIX: MOVE TT1,[POINT 6,TT] ;LOAD BYTE POINTER
SETZ TT, ;WHAT WE'VE SEEN SO FAR
FSCSI0: PUSHJ P,FSCTIN ;NEXT CHARACTER
POPJ P, ;END OF SCAN
CAIL T,"0" ;POSSIBLE VALID ALPHANUMERIC?
CAILE T,"Z" ; . . .
POPJ P, ;NO - END OF SCAN
CAILE T,"9" ;TO BE MORE PRECISE -
CAIL T,"A" ;IS IT A VALID ALPHANUMERIC?
CAIA ;YES
POPJ P, ;NO - END OF SCAN
SUBI T,40 ;MAKE INTO SIXBIT CHARACTER
TXNE TT1,77B5 ;ROOM LEFT IN TT?
IDPB T,TT1 ;YES - SO STUFF IN LATEST CHAR
JRST FSCSI0 ;LOOP BACK
;STILL FTDEC10
;FSCOCT -- READ IN OCTAL NUMBER
;FSCOCH -- READ IN OCTAL HALFWORD
;FSCOCP -- READ IN OCTAL 17-BIT WORD (PROJECT NUMBER)
;CALL IS:
;
; PUSHJ P,FSCOC-
; ERROR RETURN
; NORMAL RETURN
;
;THE ERROR RETURN IS TAKEN IF THE NUMBER READ IS TOO LARGE
;FOR A PPN, OTHERWISE THE NORMAL RETURN WILL BE TAKEN AND
;THE OCTAL INTEGER WILL BE RETURNED IN AC "TT" WITH THE TERMI-
;NATING CHARACTER IN AC "T".
;
;USES T, TT
FSCOCP: PUSHJ P,FSCOCT ;GET OCTAL VALUE
TDNE TT,[777777400000] ;MORE THAN 17 BITS?
POPJ P, ;YEP - TAKE ERROR RETURN
JRST CPOPJ1 ;NOPE, GIVE GOOD RETURN
FSCOCH: PUSHJ P,FSCOCT ;GET OCTAL VALUE
TLNE TT,-1 ;MORE THAN 18 BITS?
POPJ P, ;YEP - CALL ERROR
JRST CPOPJ1 ;NOPE - GIVE GOOD RETURN
FSCOCT: SETZ TT, ;INITIALIZE
FSCOC0: PUSHJ P,FSCTIN ;NEXT CHARACTER
POPJ P, ;C'EST TOUT
CAIL T,"0" ;SEE IF VALID OCTAL
CAILE T,"7" ; . . .
POPJ P, ;NOPE - END OF SCAN
TXNN TT,7B2 ;ROOM LEFT IN TT?
LSH TT,3 ;YES - SHIFT UP ONE OCTADE
IORI TT,-"0"(T) ;AND ADD IN THIS ONE
JRST FSCOC0 ;MORE, MORE, MORE!
;STILL FTDEC10
;FSCTIN -- READ IN ONE COMMAND CHARACTER
;CALL IS:
;
; PUSHJ P,FSCTIN
; EOL RETURN
; NORMAL RETURN
;
;IF CHARACTER READ IS LINE-FEED OR ESCAPE (I.E., END OF LINE)
;THEN RETURN IS CPOPJ0 WITH AC "T" CONTAINING 0.
;
;NORMAL RETURN IS CPOPJ1 WITH AC "T" CONTAINING THE NEXT SEVEN-BIT
;ASCII COMMAND CHARACTER, LOWER CASE SHIFTED TO UPPER CASE AND
;TABS CONVERTED TO SPACES.
FSCTIN: INCHWL T ;NEXT COMMAND CHARACTER
CAIE T,.CHDEL ;<DEL>
CAIN T,.CHCRT ;OR <CR>?
JRST FSCTIN ;YES, JUST EAT IT
CAIN T,.CHTAB ;<TAB>?
MOVEI T," " ;YES, CONVERT TO SPACE
CAIE T,.CHLFD ;<LF>
CAIN T,.CHESC ;OR <ESC>?
SETZ T, ;YES, BREAK CHAR, RETURN 0
JUMPE T,CPOPJ ;IF A BREAK JUST RETURN NOW
CAIL T,"A"+40 ;LOWER CASE
CAILE T,"Z"+40 ; . . .
CAIA ;NO
SUBI T,40 ;YES, SHIFT TO UPPER CASE
CAIE T,.CHCNC ;<ETX>
CAIN T,.CHCNZ ;OR <SUB>?
JRST FSCTIZ ;YES, EXIT
JRST CPOPJ1 ;NO, RETURN VALID CHARACTER IN T
FSCTIZ: EXIT 1, ;RETURN TO MONITOR
POPJ P,
;STILL FTDEC10
;ERROR ROUTINES FOR FSCAN AND FRIENDS
FSEDDI: TMSG <? Duplicate device illegal>
JRST FSEERR
FSEDEI: TMSG <? Duplicate extension illegal>
JRST FSEERR
FSEDFI: TMSG <? Duplicate filename illegal>
JRST FSEERR
FSEDPI: TMSG <? Duplicate path illegal>
JRST FSEERR
FSEFFF: TMSG <? FILOP. failure (>
PUSHJ P,TOC ;ISSUE ERROR CODE
TMSG <) for input file>
JRST FSEERR
FSEILS: TMSG <? Illegal switch ">
ADDI TT,"A"-'A' ;MAKE INTO 7-BIT ASCII
OUTCHR TT ;AND LIST THE SWITCH
TMSG <" specified>
JRST FSEERR
FSEIPP: TMSG <? Illegal path specification>
JRST FSEERR
FSENDI: TMSG <? Null device illegal>
JRST FSEERR
FSENFI: TMSG <? Null filename illegal>
JRST FSEERR
FSENSI: TMSG <? Null SFD illegal>
JRST FSEERR
FSENWI: TMSG <? Null switch illegal>
JRST FSEERR
FSETMS: TMSG <? Too many SFD's>
JRST FSEERR
;COMMON ERROR EXIT
FSEERR: TMSG <
>
POPJ P,
;STILL FTDEC10
;FSFSET -- BUILD A FILOP. BLOCK GIVEN SCAN DATA
;CALL IS:
;
; MOVX T,<BLKPTR>
; PUSHJ P,FSFSET
; ERROR
; RETURN
;
;WHERE <BLKPTR> IS A POINTER TO A 3 WORD TABLE CONTAINING:
; BLKPTR + 0/ LENGTH,,ADDRESS OF FILOP. BLOCK
; + 1/ LENGHT,,ADDRESS OF LOOKUP BLOCK
; + 2/ LENGTH,,ADDRESS OF PATH BLOCK
;
;THE ERROR RETURN IS TAKEN IF ANY OF THE BLOCKS ARE TOO SHORT
;
;RETURNS WITH FILOP. BLOCK SETUP, POINTING TO OTHER BLOCKS, ALL
;BLOCKS ZEROED EXCEPT FOR DEVICE, FILENAME, FILETYPE, AND FILEPATH
;WORDS.
FSFSET: MOVE TT,0(T) ;LENGTH,,ADDRESS OF FILOP. BLOCK
PUSHJ P,FSFCLR ;CLEAR BLOCK
CAIGE TT1,.FOLEB ;IS FILOP. BLOCK LONG ENUF?
POPJ P, ;NO, ERROR
MOVE TT1,FSDEV ;GET DEVICE
MOVEM TT1,.FODEV(TT) ;SET IN DEVICE WORD
MOVE TT1,1(T) ;POINTER TO LOOKUP BLOCK
HRRM TT1,.FOLEB(TT) ;SET IN FILOP. BLOCK
MOVE TT,1(T) ;POINTER TO LOOKUP BLOCK AGAIN
PUSHJ P,FSFCLR ;CLEAR IT OUT
SOJ TT1, ;COUNT WORD DOESN'T COUNT
CAIGE TT1,.RBEXT ;IS LOOKUP BLOCK LONG ENOUGH?
POPJ P, ;NO, ERROR
MOVEM TT1,.RBCNT(TT) ;SET LOOKUP BLOCK LENGTH
MOVE TT1,FSFIL ;FILE NAME
MOVEM TT1,.RBNAM(TT) ;SET IN LOOKUP BLOCK
HLLZ TT1,FSEXT ;FILE TYPE
MOVEM TT1,.RBEXT(TT) ;SET IN LOOKUP BLOCK
MOVE TT1,FSBLK ;THE SCANNER BITS
TXNN TT1,FS$PTH ;WAS A DIRECTORY PATH SPECIFIED?
JRST CPOPJ1 ;NO, ALL DONE
MOVE TT1,2(T) ;YES - ADDRESS OF PATH BLOCK
HRRZM TT1,.RBPPN(TT) ;SET IN LOOKUP BLOCK
MOVE TT,2(T) ;PATH POINTER
PUSHJ P,FSFCLR ;CLEAR IT OUT
CAIGE TT1,.PTPPN+5+1 ;IS IT LONG ENUF FOR A REAL PATH?
POPJ P, ;NO, ERROR
MOVSI TT1,FSPPN ;START OF SCANNED PATH
HRRI TT1,.PTPPN(TT) ;START OF PATH BLOCK PATH INFO
BLT TT1,.PTPPN+5+1(TT) ;SETUP PATH BLOCK
JRST CPOPJ1 ;RETURN WITH FILOP. BLOCK SETUP
;STILL FTDEC10
;FSFCLR -- ROUTINE TO CLEAR A BLOCK
;CALL IS:
;
; MOVX TT,<LENGTH,,ADDRESS>
; PUSHJ P,FSFCLR
; RETURN
;
;RETURNS ADDRESS IN TT AND LENGTH IN TT1, USES TT2
FSFCLR: HRR TT1,TT ;START ADDRESS
SETZM (TT1) ;CLEAR FIRST WORD
ADDI TT1,1 ;RH OF BLT POINTER
HRL TT1,TT ;LH OF BLT POINTER
HLRZ TT2,TT ;LENGTH TO ZERO
ADDI TT2,(TT) ;LAST WORD TO BE ZEROED
BLT TT1,(TT2) ;ZERO BLOCK
HLRZ TT1,TT ;RETURN LENGTH IN TT1
ANDI TT,-1 ;AND ADDRESS IN TT
POPJ P, ;DONE
> ;END OF IFN FTDEC10&<FTFILE!FTYANK>
SUBTTL ENTER AND LEAVE DDT -- SAVE
IFE FTFILE,<
;SAVE -- SUBROUTINE TO SAVE USER CONTEXT ON ENTRY TO DDT
;CALL:
; JSR SAVE
; NORMAL RETURN
; HERE IF CONTEXT ALREADY SAVED
;
;SAVES USER CONTEXT IF NOT ALREADY SAVED AWAY (AS FLAGGED BY SARS).
;ALWAYS SETS UP DDT CONTEXT SO DDT WILL BE IN A KNOWN STATE.
;FIRST, SAVE AND SETUP "ALWAYS" STUFF. ALSO SHUT OFF PI IN EXEC MODE
;NOW SO WE CAN SET UP STUFF LIKE ACS THAT MIGHT BE USED AT INTERRUPT LEVEL.
SAVEG: MOVEM T,SWTEM ;SAVE AC FOR MOMENT
XMOVEI T,-1 ;GET SECTION NUMBER FOR OUR PC
HLLZM T,SECDDT ;AND SAVE IT FOR OTHERS
HLLZ T,SAVE ;GET SECTION 0 PC FLAGS
SKPS0 ;IN NON-ZERO SECTION?
XSFM T ;YES, ASK CPU FOR PC FLAGS
MOVEM T,XSAVE ;SAVE PC FLAGS FOR LATER XJRSTF
ROT T,5 ;ROTATE USER MODE BIT TO SIGN
MOVEM T,USRFLG ; AND SAVE IT
MOVE T,XSAVE ;RETRIEVE CURRENT PC FLAGS
XOR T,PCFLG ;CHECK USER FLAG AGAINST LAST SAVE
TXNE T,1B5 ;SAME?
SETZM SARS ;NO, SAVE ACS AND PC FOR EXIT
; SO EXEC/USER MODE FLOP RESTORED AS ENTERED
IFN FTEXEC,<
SKPEXC ;IN EXEC MODE?
JRST SAVE1 ;NO, SKIP THIS
SKIPN SARS ;WANT TO SAVE OLD PI STATUS?
CONI PI,SAVPI ;YES, SAVE FOR EXIT
CONO PI,@SAVPI+1 ;SET UP PI SYSTEM FOR DDT
SAVE1:
> ;END OF IFN FTEXEC
MOVE T,SWTEM ;RESTORE THE AC
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
;NOW SAVE NON-EXEC MODE THINGS THAT SHOULD ONLY BE SAVED IF SARS=0,
;THEN SET UP ALL NON-EXEC MODE THINGS THAT DDT WANTS SET UP.
AOS SAVE ;ASSUME SKIP RETURN (ALREADY SAVED)
SKIPE SARS ;ALREADY SAVED?
JRST SAVE2 ;YES, DON'T SAVE THESE AGAIN
SOS SAVE ;ASSUMPTION NOT VALID, UN-DO SKIP RETURN
MOVEM 17,AC17 ;SAVE ACS
HRRZI 17,AC0
BLT 17,AC0+16
SETOM FAKEAC ;NOTE LOCATIONS 0 - 17 SAVED AWAY
MOVE T,XSAVE ;GET FRESH PC FLAGS
MOVEM T,PCFLG ;AND SAVE THEM FOR OTHERS
SAVE2: MOVE P,[IOWD LPDL,PDL] ;SETUP ALL ACS
SETZ F, ;NO FLAGS YET
MOVE T,[SCHM,,SCH] ;DDT TYPEOUT MODES
BLT T,ODF ;SET THEM UP
SETZM MAPFN ;NO MAPPING ($U) IN EFFECT
;NOW SAVE USER MODE ONLY ITEMS.
IFN FTDEC20,<
IFN FTEXEC,<
SKPEXC ;DON'T DO THIS IF IN EXEC MOE
> ;END OF IFN FTEXEC
SKIPE SARS ;ALREADY SAVED?
JRST SAVE4 ;YES, DON'T SAVE AGAIN
SETOM SAVSTS ;ASSUME PSI SYSTEM IS ON
MOVEI T1,.FHSLF ;BUT CHECK...
SKPIR% ;IS IT?
SETZM SAVSTS ;NO, REMEMBER THAT IT'S OFF
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;FALL IN FROM ABOVE
;HERE TO ATTEMPT TO RUN IN NON-ZERO SECTIONS IN USER MODE WITH
;MONITORS THAT ALWAYS SET PCS TO ZERO. THIS IS TEMPORARY CODE
;THAT SHOULD BE DELETED WHEN USER MODE EXTENDED ADDRESSING IS DONE.
IFE FTMON,<
SKPNS0 ;USER MODE EXTENDED ADDRESSING?
JRST SAVE4 ;NO, FORGET IT
MOVEI R,BEG.V ;OUR DATA AREA IN SECTION 0
SETOM LASTPG ;CLEAR THIS BEFORE CALLING CHKADR
PUSHJ P,CHKADR ;SEE ABOUT THE PAGE
TXNE TT,PG$EXI ;PAGE EXISTS ALREADY?
JRST SAVE4 ;YES, DON'T OVERWRITE IT
;SET UP AN INDIRECT POINTER FROM OUR DATA PAGE TO THE CORRESPONDING
;PAGE IN SECTION 0, SO THAT THE MONITOR WILL FIND OUR ARGUMENTS TO
;JSYSES LIKE TEXTI% THAT TAKE ARGUMENTS IN MEMORY. AS LONG AS PCS
;IS ZERO, THE MONITOR HAS NO WAY TO FETCH OUT OF NON-ZERO USER SECTIONS.
XMOVEI T1,BEG.V ;YES, SET UP AN @ POINTER
LSH T1,WRD2PG ; SO JSYSES LIKE TEXTI% WORK
HRLI T1,.FHSLF ;OUR FORK TO OUR FORK
MOVX T2,<.FHSLF,,BEG.V_WRD2PG> ;TO SECTION 0
MOVX T3,PM%RWX ;READ, WRITE, AND EXECUTE
PMAP% ;SET UP THE INDIRECT POINTER
ERJMP .+1 ;WE TRIED
> ;END IFE FTMON
> ;END IFN FTDEC20
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
;NOW SAVE ALWAYS-SAVE EXEC MODE STATUS. THIS INCLUDES CPU TYPE,
;PAGING TYPE, ETC.
SAVE4:
IFN FTEXEC,<
SKPEXC ;IN EXEC MODE?
JRST SAVE8 ;NO, DON'T BOTHER (FAILS FOR KS10 ANYWAY)
SAV4A: MOVE T,[BZ$FLG,,BZ$FLG+1] ;ZERO FLAGS
SETZM BZ$FLG ; . . .
BLT T,ZZ$FLG-1 ; . . .
MOVNI T,1 ;LOAD T WITH ALL ONES
AOBJN T,.+1 ;ADD ONE TO BOTH HALVES
JUMPE T,SAV4I ;IF T=0 THEN PROCESSOR AFTER KA-10
SETOM KAFLG ;RH CARRIED INTO LH, MUST BE KA-10
JRST SAVE6 ;CONTINUE
SAV4I: BLT T,0 ;SEE WHAT PROCESSOR DOES WITH BLT
JUMPN T,SAV4L ;KL-10 WILL LEAVE BEHIND 1,,1
SETOM KIFLG ;T=0 IF KI-10
SETOM KIPAG ;KI-10'S ALWAYS DO KI-PAGING
JRST SAVE6 ;CONTINUE
SAV4L: APRID T ;GET PROCESSOR SERIAL NUMBER
ANDI T,17777 ;SERIAL NUMBER ONLY
CAIL T,^D1024 ;IN RANGE OF
CAILE T,^D4095 ;KL-10 PROCESSORS?
CAIA ;NOPE
SETOM KLFLG ;IS A KL-10
CAIL T,^D4096 ;IN RANGE OF
CAILE T,^D8191 ;KS-10 PROCESSORS?
CAIA ;NOPE
SETOM KSFLG ;IS A KS-10
SKPKL ;ON A KL-10
SKPNKS ;OR A KS-10?
CAIA ;YES
HALT . ;EXEC DDT ON AN UNKNOWN PROCESSOR TYPE
SETOM KLSFLG ;EITHER A KL-10 OR A KS-10
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE AND IFN FTEXEC
;CONTINUED FROM PREVIOUS PAGE
;NOW SAVE THE THINGS THAT SHOULD ONLY BE SAVED IN EXEC MODE IF SARS=0,
;LIKE APR STATUS.
SAVE6: SKIPE SARS ;ALREADY SAVED?
JRST SAVE8 ;YES, SKIP THIS
CONI APR,T ;GET APR STATUS
IFN FTDEC10,<
SKPNKA ;ON A KA-10?
TXNN T,1B23 ;YES, NXM SET?
CAIA ;NO OR NO
TXO T,1B0 ;KA AND NXM SET, MOVE TO 1B0
> ;END IFN FTDEC10
MOVEM T,SAVAPR ;SAVE APR STATUS FOR LATER
> ;END OF IFN FTEXEC
;NOW CALL TTYRET TO SAVE ALL TTY-RELATED STUFF.
SAVE8: PUSHJ P,TTYRET ;DO TTY-DEPENDENT STUFF FOR RETURN TO DDT
SETOM SARS ;STATUS SUCCESSFULLY SAVED
JRST @SAVE
SUBTTL ENTER AND LEAVE DDT -- RESTOR
;STILL IFE FTFILE
;RESTOR -- ROUTINE TO RESTORE USER STATUS BEFORE RETURNING TO THE USER
;CALL:
; JSP T,RESTOR
; RETURN
;
;HERE WHEN ALL USER STATES RESTORED.
RESTOR: TDZA TT,TT ;NORMAL ENTRY
RESTRX: SETO TT, ;FLAG USE XJRSTF REGARDLESS
MOVEM TT,RSTM1 ;SAVE FLAG
MOVEM T,SAVE
PUSHJ P,TTYLEV ;RESTORE STATUS OF CONSOL TTY (EXEC MODE)
MOVE T,PCFLG ;SAVED PC FLAGS
TLZ T,010000 ;DON'T TRY TO RESTORE USER MODE FLAG
MOVEM T,XSAVE ;SET PC FLAGS FOR POSSIBLE XJRSTF
SKPNS0 ;IN NON-ZERO SECTION?
SKIPE RSTM1 ;OR NEED XJRSTF REGARDLESS?
CAIA ;YES, DON'T WIPE OUT SAVE
HLLM T,SAVE ;NO, SET ZERO SECTION PC FLAGS
IFN FTEXEC,<
SKPEXC
JRST RESTR2
MOVE T,SAVPI ;GET SAVED PI SYSTEM ENABLE BITS
AND T,SAVPI+1
IORI T,2000 ;TURN ON CHANNELS
TRZ T,1000 ;MAKE SURE WE DON'T ASK FOR BOTH
HRRZM T,SAVPI
RESTR2:
> ;END FTEXEC
HRLZI 17,AC0
BLT 17,17
SETZM SARS
IFN FTEXEC,<
SKPUSR ;IN USER MODE?
SKIPL SAVAPR ;EXEC, WANT NXM SET?
CAIA ;USER OR NO
MOVES 777777 ;WANT NXM SET, ASSUME KA-10
> ;END IFN FTEXEC
;FALL INTO NEXT PAGE
;STILL IFE FTFILE
;FALL IN FROM ABOVE
;NOW TO RETURN TO THE CALLER, EITHER DDT OR THE USER PROGRAM ITSELF.
;IF IN EXEC MODE, WE TRY TO TURN THE PI ON AS LATE AS POSSIBLE, TO
;MAXIMIZE THE CHANCE THAT THE PC WILL GET OUT OF DDT BEFORE AN INTERRUPT
;OCCURS.
SKPNS0 ;WANT TO USE XJRSTF?
SKIPE RSTM1 ;NOT UNLESS ENTERED AT RESTRX
IFE FTEXEC,<
XJRSTF XSAVE ;IN NON-ZERO SECTION, USE XJRSTF
JRSTF @SAVE ;IN SECTION 0, USE JRSTF
> ;END IFE FTEXEC
IFN FTEXEC,<
JRST RESTR6 ;GO USE XJRSTF
SKPUSR ;IN EXEC MODE?
CONO PI,@SAVPI ;YES, RESTORE USER'S PI
; NOTE: MUST BE LAST INSTRUCTION BEFORE JRSTF
JRSTF @SAVE ;RETURN TO DDT OR USER
RESTR6: SKPUSR ;IN EXEC MODE
CONO PI,@SAVPI ;YES, RESTORE USER'S PI
; NOTE: MUST BE LAST INSTRUCTION BEFORE XJRSTF
XJRSTF XSAVE ;RETURN TO DDT OR USER
>; END IFN FTEXEC
SUBTTL ENTER AND LEAVE DDT -- SWAP
;STILL FTFILE
;ROUTINE TO SWAP BETWEEN DDT AND USER CONTEXTS.
; ACS AND FLAGS ARE SWAPPED, BUT BREAKPOINTS AND OTHER STUFF
; ARE NOT TOUCHED, SINCE CONTROL IS EXPECTED TO RETURN TO DDT SOON.
SWAPG: MOVEM T,SWTEM ;SAVE T FOR MOMENT
SKIPE SARS ;GOING TO USER CONTEXT?
JRST SWAP2 ;YES, JUST SET NEW FLAGS
HLLZ T,SWAP ;NO, NEED TO SAVE CURRENT FLAGS
SKPS0 ;VALID?
XSFM T ;NO, GET REAL PC FLAGS
MOVEM T,PCFLG ;SAVE OLD USER FLAGS
SWAP2: MOVE T,PCFLG ;SET USER FLAGS
MOVEM T,XSWAP ;SET UP FOR XJRSTF
SKPNS0 ;IN SECTION 0?
HLLM T,SWAP ;YES, SET UP FOR JRSTF
MOVE T,SWTEM ;RESTORE T
EXCH 0,AC0 ;SWAP AC 0
MOVEM 0,SAV0 ;SAVE 0 FOR WORK
MOVE 0,[EXCH 1,AC0+1];SETUP INST FOR SWAPPING ACS
SWAPL: XCT 0 ;SWAP AN AC
ADD 0,[Z 1,1] ;INC AC AND MEM FIELDS
TXNE 0,<Z 17,> ;OVERFLOWED AC FIELD?
JRST SWAPL ;NO, LOOP
MOVE 0,SAV0 ;YES, RESTORE SAVED AC
SETCMM SARS ;REMEMBER WE HAVE SWAPPED CONTEXTS
SKPNS0 ;IN NON-ZERO SECTION?
JRSTF @SWAP ;RETURN, RESTORING NEW FLAGS
XJRSTF XSWAP ;RETURN, RESTORING NEW FLAGS
SUBTTL ENTER AND LEAVE DDT -- SUPPRESS ADDRESS BREAKS
;STILL IFE FTFILE
;PCAFI -- ROUTINE TO SUPPRESS ADDRESS BREAK
;CALL IS:
;
; JSP TT2,PCAFI
; INSTR
;
;THIS ROUTINE WILL RETURN TO "INSTR" WITH ADDRESS BREAK INHIBIT SET
;SO THAT THE INSTRUCTION WILL NOT CAUSE AN ADDRESS BREAK.
;
;USED PRIMARILY BY FETCH AND STORE LOGIC.
;
;USES TT1, TT2
PCAFI: SKPS0 ;IN NON-ZERO SECTION?
JRST PCAFI1 ;YES, DIFFERENT CODE
PCAFI0: TXO TT2,PC$AFI ;SET ADDRESS FAILURE INHIBIT
JRSTF (TT2) ;AND RETURN ALLOWING ONE INSTRUCTION TO
; EXECUTE FREE OF ADDRESS BREAK
PCAFI1: XSFM TT1 ;MUST EXPLICITLY READ PC FLAGS
TXO TT1,PC$AFI ;SET ADDRESS FAILURE INHIBIT
XJRSTF TT1 ;AND RETURN ALLOWING ONE INSTRUCTION TO
; EXECUTE FREE OF ADDRESS BREAK
SUBTTL ENTER AND LEAVE DDT -- BCOM
;STILL IFE FTFILE
;HERE FROM THE JSR IN THE BREAKPOINT BLOCK ON ANY BREAKPOINT.
;FIRST, DECIDE WHETHER OR NOT TO BREAK (CONDITIONS, PROCEED COUNT).
BCOMG: SETZM SARS ;ALWAYS SAVE REGISTERS
JSR SAVE ;SAVE THE WORLD
PUSHJ P,REMOVB ;REMOVE ALL BREAKPOINTS
;NOW FIGURE OUT WHAT HAPPENED
HRRZ S,BCOM ;SEE WHICH BREAKPOINT WE CAME FROM
SUBI S,BPT$B+B$JSR+1 ;S:=BREAKPOINT NUMBER * B$SIZ
MOVEM S,BPTDX ;SAVE "INDEX" FOR LATER
MOVE T,BPT$B+B$BPT(S);REAL ADDRESS (+1) FROM WHENCE WE CAME
SKPNS0 ;IN NON-ZERO SECTION?
ANDI T,-1 ;NO, ONLY 18-BITS OF PC
CAIE S,0 ;BREAKPOINT 0?
HRRI T,-1(T) ;NO - BACKUP PC BY 1
MOVEM T,PCWRD ;SAVE FOR $X ET AL
SETOM BPTIP ;FLAG BREAKPOINT IN PROGRESS
JUMPE S,BREAK ;BREAKPOINT 0 (UNSOLICITED) ALWAYS BREAKS
;NOW SEE WHETHER OR NOT TO BREAK
XCT BPT$B+B$XCT(S) ;(USER) CONDITIONAL BREAK INSTRUCTION
SOSG BPT$B+B$CNT(S) ;PROCEED COUNT HIT 0?
JRST BREAK ;USER OR COUNT SAYS TO BREAK
;NO BREAK, JUST CONTINUE THE PROGRAM AS IF NOTHING HAD HAPPENED
JRST PROCD4 ;CONTINUE WITH USER PROGRAM
;STILL IFE FTFILE
;<< (MATCH ANGLE BRACKETS)
BREAK: PUSHJ P,TTYCLR ;FLUSH WAITING TTY CHARACTERS FOR INPUT
SETZM I.LOG ;NO $X'S YET SINCE THIS BREAKPOINT
MOVE S,BPTDX ;BREAKPOINT INDEX (NUMBER * B$SIZ)
MOVEI T,"$" ;START OF BREAKPOINT MESSAGE
PUSHJ P,TOUT ;SEND IT OUT
MOVE A,S ;COPY OF INDEX
IDIVI A,B$SIZ ;REDUCE TO BREAKPOINT NUMBER
PUSHJ P,FP7 ;TYPE AS DECIMAL (SANS THE DOT)
MOVSI W1,(ASCII/B>/) ;REST OF BREAKPOINT TEXT
PUSHJ P,TEXT2 ;TYPE IT OUT
MOVEI T,">" ;IN CASE CONDITIONAL BPT
MOVE S,BPTDX ;RESTORE BREAKPOINT INDEX
SKIPG BPT$B+B$CNT(S) ;DID WE STOP ON USER'S CONDITIONAL BPT?
PUSHJ P,TOUT ;NO, NORMAL BPTS HAVE 2 ANGLE BRACKETS
MOVE T,PCWRD ;GET BREAKPOINT PC + 1
PUSHJ P,PSHLLC ;SAVE IN PC RING BUFFER
PUSHJ P,PINST ;SHOW BREAKPOINT LOCATION/CONTENTS
MOVE S,BPTDX ;LI1 CRUMPS ON S
SKIPGE BPT$B+B$OPN(S) ;ADDRESS TO OPEN?
JRST BREAK4 ;NO
PUSHJ P,TTAB ;YES, TAB OVER FOR NEATNESS
MOVE T,BPT$B+B$OPN(S);GET ADDRESS TO OPEN
PUSHJ P,PSHLLC ;PUT ADDRESS IN PC RING BUFFER TOO
PUSHJ P,LI1 ;SHOW ADDRESS/CONTENTS
MOVE S,BPTDX ;AND AGAIN, LI1 CRUMPS ON S
BREAK4: MOVE R,BPT$B+B$FLG(S);GET BREAKPOINT FLAGS
PUSHJ P,LISTEN ;USER TYPING?
TXNN R,BP$PRO ;NO, AUTO-PROCEED IN EFFECT?
JRST RET ;REALLY TIME FOR A BREAK
JRST PROCD2 ;AUTO-PROCEED FROM THIS BREAKPOINT
;STILL IFE FTFILE
;INSERT BREAKPOINTS
INSRTB: PUSHJ P,SAVRST ;SAVE A FEW HANDY REGISTERS
MOVEI S,B$SIZ ;START WITH $1B
INSRT1: MOVE R,BPT$B+B$ADR(S);NEXT BREAKPOINT ADDRESS
JUMPE R,INSRT3 ;IF 0 THEN NO BREAKPOINT HERE
PUSHJ P,FETCH ;GET USER INSTRUCTION
JRST INSRT3 ;CAN'T READ, JUST IGNORE
MOVEM T,BPT$B+B$INS(S);SAVE USER INSTRUCTION FROM BREAKPOINT
MOVSI T,(JSR) ;FIRST HALF OF BREAKPOINT
HRRI T,BPT$B+B$BPT(S);CALCULATE ADDRESS TO BREAKPOINT TO
PUSHJ P,DEPMEM ;PUT THE JSR IN USER PROGRAM
JFCL ;HERE ONLY IF CAN'T WRITE IN HIGH SEG
INSRT3: ADDI S,B$SIZ ;ADVANCE TO NEXT BREAKPOINT
CAIGE S,B$SIZ*<NBP+1> ;DONE THEM ALL YET?
JRST INSRT1 ;NO, GO DO NEXT ONE
POPJ P, ;YES, RETURN WITH BREAKPOINTS INSTALLED
;REMOVE BREAKPOINTS
REMOVB: PUSHJ P,SAVRST ;SAVE A FEW REGISTERS
MOVEI S,B$SIZ ;START WITH $1B
REMOV1: MOVE T,BPT$B+B$INS(S);INSTRUCTION THAT BELONGS AT THIS BREAKPOINT
SKIPLE R,BPT$B+B$ADR(S);ADDRESS OF THIS BREAKPOINT (IF ANY)
PUSHJ P,DEPMEM ;PUT USER INSTRUCTION BACK
JFCL ;HERE ONLY IF NO WRITE IN HIGH SEG
ADDI S,B$SIZ ;ADVANCE TO NEXT BREAKPOINT
CAIGE S,B$SIZ*<NBP+1> ;DONE THEM ALL YET?
JRST REMOV1 ;NO, GO REMOVE NEXT ONE
POPJ P, ;YES, ALL BREAKPOINTS REMOVED
> ;END IFE FTFILE
SUBTTL WORD TYPEOUT AND FORMATTING ROUTINES
;HERE TO TYPE OUT A WORD JUST FETCHED FROM MEMORY, AS WHEN A REGISTER
;HAS JUST BEEN OPENED. USES THE CURRENT TYPEOUT MODE UNLESS LF1 IS SET.
CONSYM: MOVEM T,LWT
IFN FTFILE,<
IFN FTDEC10,<
MOVEM T,POKBLK+1>> ;STORE FOR /P/M LOGIC
TRNN F,LF1
JRST (SCH) ;PIN OR FTOC
TRNE F,CF1
JRST FTOC ;TYPE OUT AS CONSTANT
;PRINT OUT IN INSTRUCTION FORMAT
PIN: TDC T,[XWD -1,400000] ;IS THIS A NEGATIVE NUMBER?
TDCN T,[XWD -1,400000]
JRST PADS3B ;TYPE AS NEG NUM
TXNN T,777B8 ;[240] GOT A VALID OPCODE?
JRST HLFW ;[240] NO WAY! TYPE OUT XWD FORMAT
TRO F,OKAF ;[240] DON'T TYPE "#" AFTER OPERATOR
PUSHJ P,LOOK ;[240] DO 36-BIT OPERATOR SEARCH
JRST PIN0B ;[240] NOPE
JRST PIN0B ;[240] NOPE
POPJ P, ;[240] EXACT MATCH, ALL DONE
;[240] NOW TRY FOR OPERATORS OF FORM OPCODE + E-FIELD
PIN0B: TLC T,700000 ;CHECK FOR AN I/O INSTRUCTION
TLCN T,700000 ;NEED TO DECODE FIELDS DIFFERENTLY IF SO
JRST INOUT ;IS AN I/O INST, GO HANDLE
IFN FTOPX,< ;SKIP THIS IF WE WANT TO BE FAST
MOVE T,LWT ;[240] FRESH COPY OF WORD
TXZ T,<Z 17,> ;[240] MASK OUT AC FIELD
CAME T,[TTCALL 0,] ;DON'T TYPE "INCHRW 17,"
PUSHJ P,LOOK ;[240] LOOK FOR SYMBOLIC OPERATOR
JRST PIN0D ;[240] NOPE
JRST PIN0D ;[240] NOPE
PUSHJ P,TSPC ;[240] MATCH!!! SPACE OVER
LDB T,[POINT 4,LWT,12] ;[240] GET AC FIELD
JUMPE T,CPOPJ ;[240] AC FIELD NULL, ALL DONE
PUSHJ P,PAD ;[240] TYPE OUT SYMBOLIC AC FIELD
MOVEI T,"," ;[240] CAP OFF AC FIELD WITH COMMA
PJRST TOUT ;[240] AND TYPEOUT IS COMPLETE
;[240] NOW TRY FOR OPCODE AND AC FIELD
PIN0D: HLLZ T,LWT ;[240] FRESH COPY OF WORD
TXZ T,37B17 ;[240] REDUCE TO OPCODE AND AC FIELD
CAME T,[CALLI 0] ;CALLI?
CAMN T,[MTAPE 0] ;OR MTAPE?
JRST PIN0F ;YES, DON'T TYPE "RESET 1234"
PUSHJ P,LOOK ;[240] SEE IF ANY SUCH ANIMAL
JRST PIN0F ;[240] NOPE
JRST PIN0F ;[240] NOPE
TXO F,NAF ;[240] YEP, SO ALLOW NEGATIVE ADDRESS
PUSHJ P,TSPC ;[240] SPACE OVER ONE
JRST PI4 ;[240] AND GO TYPE OUT I, X, AND Y
> ;END IFN FTOPX
;[240] LAST TRY FOR A USER SYMBOL - OPCODE FIELD ONLY
PIN0F: HLLZ T,LWT ;[240] FRESH COPY OF WORD
TLZ T,777 ;[240] OPCODE ONLY
CAME T,[CALLI 0,0] ;[240] A CALLI?
CAMN T,[TTCALL 0,0] ;[240] OR A TTCALL?
JRST PIN0H ;[240] YES, DON'T TYPE "RESET 200064" ETC.
CAMN T,[MTAPE 0,0] ;[240] AN MTAPE?
JRST PIN0H ;[240] YES, DON'T TYPE "MTWAT. 37" ETC.
PUSHJ P,LOOK ;[240] SEE IF USER SYMBOL
JRST PIN0H ;[240] NOPE
JRST PIN0H ;[240] NOPE
JRST PIN2 ;[240] GOT IT, TYPE AC, I, X, AND Y
;[240] LAST DITCH - LOOK AT NORMAL HARDWARE OPCODES
PIN0H: TRZ F,OKAF ;[240] CLEAR CROCK FLAG
HLLZ T,LWT ;[240] FRESH COPY OF WORD
TLZ T,777 ;[240] OPCODE ONLY
PUSHJ P,OPTYPE ;[240] TRY INTERNAL TABLES
TRNN F,ITF ;[240] DID WE WIN?
PJRST HLFW ;[240] COMPLETELY UNKNOWN OPERATOR
;[240] FALL INTO PIN2 ON NEXT PAGE
;[240] COMMON INSTRUCTION-FORMAT TYPEOUT CODE
PIN2: TRO F,NAF ;EXACT MATCH TYPED, ALLOW NEG ADDRESSES
PUSHJ P,TSPC
LDB T,[XWD 270400,LWT] ;GET AC FIELD
JUMPE T,PI4
HLRZ W,LWT
CAIL W,(JRST)
CAILE W,256777 ;IS INST BETWEEN JRST AND XCT?
JRST [PUSHJ P,PAD ;NO, PRINT SYMBOLIC AC
JRST PI3A]
PUSHJ P,TOC ;YES, PRINT NUMERIC AC
PI3A: MOVEI W1,","
PUSHJ P,TEXT
PI4: MOVE W1,LWT
TXNE W1,<@> ;CHECK FOR INDIRECT BIT
JRST PI80 ;YES, ALWAYS SYMBOLIC ADDRESS
HRRZ T,LWT
LDB W,[XWD 331100,LWT] ;INSTRUCTION BITS
MOVE W1,W ;GET COPY
TRC W1,600
TRNN W1,710 ;IS INST TRXX OR TLXX?
JRST [PUSHJ P,TOC ;YES, PRINT ADDRESS NUMERIC
JRST PI7] ;CONTINUE WITH INDEX CHECK
CAIL W,240
CAILE W,247
JRST PI84 ;ALL (EXCEPT ASH,ROT,LSH) HAVE SYMBOLIC ADRS
CAIN W,<JFFO>_-33 ;JFFO?
JRST PI84 ;SYMBOLIC ADDRESS
PUSHJ P,PADS3A ;ONLY ABSOLUTE ADDRESSING FOR LSH, ASH, AND ROT
PI7: TRZ F,NAF
LDB R,[XWD 220400,LWT] ;INDEX REGISTER CHECK
JUMPE R,CPOPJ ;EXIT
MOVEI T,"("
PUSHJ P,TOUT
MOVE T,R
PUSHJ P,PAD
MOVEI T,")"
JRST TOUT ;EXIT
PI80: MOVEI T,"@" ;SYMBOLIC INDIRECT BIT
PUSHJ P,TOUT ;TYPE IT
HRRZ T,LWT ;GET 18-BIT Y-FIELD FOR SYMBOLIC ADDRESS
PI84: PUSHJ P,PAD ;PRINT SYMBOLIC (UNLESS $A)
JRST PI7 ;CHECK FOR INDEXING
HLFW: HLRZ T,LWT ;PRINT AS HALF WORDS
JUMPE T,HLFW1 ;TYPE ONLY RIGHT ADR IF LEFT ADR=0
TRO F,NAF ;ALLOW NEGATIVE ADDRESSES
PUSHJ P,PAD ;PRINT AS 18-BIT "ADDRESS"
MOVSI W1,(ASCII /,,/)
PUSHJ P,TEXT2 ;TYPE ,,
HLFW1: HRRZ T,LWT
PUSHJ P,PAD ;PRINT AS 18-BIT ADDRESS
TRZ F,NAF ;TURN NAF BACK OFF
POPJ P, ;DONE
;PRINT ADDRESSES (ARG USUALLY 18 BITS BUT CAN BE 36 BITS)
PAD: ANDI T,-1 ;PRINT ONLY RIGHT HALF
PADR: JRST (AR) ;PADSO OR TOC
PADSO: JUMPE T,FP7B ;PRINT A ZERO
PUSHJ P,LOOK
JRST PADS3 ;NOTHING FOUND, TYPE NUMERIC
CAIA ;SOMETHING FOUND
POPJ P, ;EXACT MATCH FOUND AND TYPED
MOVE TT1,S ;COPY OFFSET
MOVE TT2,SYMOFS ;AND GET HIGHEST ALLOWABLE OFFSET
TXC TT1,1B0 ;TURN INTO UNSIGNED NUMBERS
TXC TT2,1B0 ;SO CAN COMPARE THEM
CAMGE TT1,TT2 ;ADR WITHIN SYMBOL + OFFSET RANGE?
TXNN W,-20 ;PRINT ACS THAT DON'T MATCH EXACTLY NUMERICALLY
JRST PADS3 ;PRINT ADDRESS NUMERICALLY
TLNN W,-1 ;IS SYMBOL IN SECTION 0?
TLNN T,-1 ;YES, IS ADDRESS NOT IN ZERO?
CAIA ;CASE DOESN'T APPLY, CONTINUE
JRST PADS3 ;YES, DONT TYPE DDT+10000 FOR 1,,0
TXNN F,NAF ;AM I GOING TO TYPE SYM+OFFS OR -1?
JRST PADS1 ;ALWAYS TYPE SYM+OFFS, EVEN NEAR -1
CAIL T,-100 ;IS ADDR BETWEEN 0,,-100 AND 0,,-1?
CAILE T,-1 ; . . .
JRST PADS1 ;NO, TYPE AS SYM+OFFSET
JRST PADS3 ;YES, TYPE AS -N FOR "MOVEI -1" TYPEOUT
PADS1: MOVEM S,TEM
PUSHJ P,PSYM0
MOVEI T,"#"
TXNE F,MDLCLF ;SYMBOL IS OUTSIDE LOCAL?
PUSHJ P,TOUT ;YES, FLAG
MOVEI T,"+"
PADS1A: PUSHJ P,TOUT
MOVE T,TEM
JRST TOCA ;TYPE WITHOUT COMMAS
PADS3: TLNE T,-1 ;GLOBAL (30-BIT) ADDRESS?
JRST PADS5 ;YES, TYPE AS SECNUM,,TAG
PADS3A: TRNN F,NAF ;NEGATIVE ADDRESSES ALLOWED?
JRST TOC ;NO, JUST TYPE OUT OCTAL (OR WHATEVER)
CAIGE T,776000 ;".LT. -2000" ?
JRST TOC
PADS3B: MOVN T,T ;WANT TO TYPE OUT AS A NEGATIVE NUMBER
HRRZM T,TEM ;BUT ONLY 18-BITS WORTH
MOVEI T,"-"
JRST PADS1A
PADS5: PUSH P,T ;SAVE T FOR MOMENT
HLRZ T,T ;GET GLOBAL SECTION NUMBER
PUSHJ P,TOC ;TYPE OUT AS NUMBER
MOVSI W1,(ASCII/,,/) ;SEPARATE TWO HALVES
PUSHJ P,TEXT2 ; WITH ,,
POP P,T ;GET BACK T
PJRST PAD ;AND TYPE LOW-ORDER 18 BITS
INOUT:
IFN FTOPX,< ;[240] LOOK FOR USER OPERATORS
AND T,[777740,,0] ;[240] OPERATOR & DEVICE CODE
TRO F,OKAF ;[240] NO "#" AFTER OPERATOR SYMBOL
PUSHJ P,LOOK ;[240] LOOK FOR USER-DEFINED OPERATOR
JRST INOUT1 ;[240] NOPE
JRST INOUT1 ;[240] NOPE
TRZ F,OKAF ;[240] FOUND ONE, CLEAR KROCK FLAG
PUSHJ P,TSPC ;[240] SPACE OVER FROM OPERATOR SYMBOL
JRST PI4 ;[240] GO TYPE OUT I, X, AND Y FIELDS
INOUT1: MOVSI T,777000 ;JUST THE OPCODE FIELD
AND T,LWT ;(IN CASE KS-10 STYLE I/O INSTRUCTION)
TLNN T,077000 ;OPCODE 700?
JRST INOUT3 ;FLICK IT IN (DON'T TYPE APRID 14, ETC.)
PUSHJ P,LOOK ;SEE IF ANY SUCH ANIMAL
JRST INOUT3 ;NOPE
JRST INOUT3 ;NOPE
TRZ F,OKAF ;FOUND A MATCH, CLEAR KROCK FLAG
JRST PIN2 ;AND TYPE AC, I, X, AND Y FIELDS NORMALLY
INOUT3: TRZ F,OKAF ;[240] CLEAR KROCK FLAG
MOVE T,LWT ;[240] RESTORE T
> ;[240] END OF IFN FTOPX
LDB R,[POINT 7,T,9] ;PICK OUT IO DEVICE BITS
CAIL R,700_-2 ;IF DEVICE .L. 700, THEN TYPE
JRST HLFW ;TYPE AS HALF WORDS
LDB R,[POINT 3,T,12]
DPB R,[POINT 6,T,8] ;MOVE IO BITS OVER FOR OP DECODER
PUSHJ P,OPTYPE
PUSHJ P,TSPC
MOVSI T,077400
AND T,LWT
JUMPE T,INOUT4 ;TYPE "APR,"
PUSHJ P,LOOK ;LOOK FOR DEVICE NUMBER
JRST INOUT2 ;NOTHING FOUND, PRINT AS OCTAL
JRST INOUT2 ;NO EXACT MATCH, PRINT AS OCTAL
JRST PI3A ;EXACT MATCH TYPED
INOUT2: LSH T,-30
PUSHJ P,TOC
JRST PI3A
INOUT4: MOVE T,[ASCIZ/APR/] ;AS IN "CONO APR,BITS"
PUSHJ P,TEXTT ;TYPE IT OUT
JRST PI3A ;GIVE COMMA AND REST OF I, X, AND Y
SUBTTL OUTPUT SUBROUTINES
FTOC: ;NUMERIC OUTPUT SUBROUTINE
TOC: HRRZ W1,ODF
CAIN W1,10 ;IS OUPUT RADIX NOT OCTAL, OR
TLNN T,-1 ;ARE THERE NO LEFT HALF BITS?
JRST TOCA ;YES, DO NOTHING SPECIAL
HRRM T,TOCS ;NO, TYPE AS HALF WORD CONSTANT
HLRZS T ;GET LEFT HALF
PUSHJ P,TOC0 ;TYPE LEFT HALF
MOVSI W1,(ASCII /,,/)
PUSHJ P,TEXT2 ;TYPE ,,
XCT TOCS ;GET RIGHT HALF BACK
TOCA: HRRZ W1,ODF ;IS OUTPUT RADIX DECIMAL?
CAIN W1,12
JRST TOC4 ;YES,TYPE SIGNED WITH PERIOD
TOC0: LSHC T,-43
LSH W1,-1 ;W1=T+1
DIVI T,(ODF)
PUSH P,W1
SKIPE T
PUSHJ P,TOC0
POP P,T
ADDI T,"0"
CAILE T,"9" ;[225] RADIX-DIGIT .GT. 9?
ADDI T,"A"-"9"-1 ;[225] YES, SHIFT TO LETTERS
JRST TOUT
TOC4: MOVE A,T ;TYPE AS SIGNED DECIMAL INTEGER
JUMPGE T,TOC5
MOVEI T,"-"
PUSHJ P,TOUT
TOC5: PUSHJ P,FP7 ;DECIMAL PRINT ROUTINE
TOC6: MOVEI T,"."
JRST TOUT
;SYMBOL OUTPUT SUBROUTINE
PSYM0: MOVEM W1,SPSAV ;SAVE POINTER TO TYPED SYM
PSYM: ;RADIX 50 SYMBOL PRINT
MOVE T,W2 ;GET SYMBOL
TXZ T,PNAME ;CLEAR OUT FLAGS
PSYM1: IDIVI T,50
PUSH P,W1
JUMPE T,PSYM2
PUSHJ P,PSYM1
PSYM2: POP P,T
JUMPE T,[MOVEI T," " ;SHOW EMBEDDED SPACES
JRST TOUT]
ADDI T,260-1
CAILE T,271
ADDI T,301-272
CAILE T,332
SUBI T,334-244
CAIN T,243
MOVEI T,256
JRST TOUT
;FLOATING POINT OUTPUT
TFLOT: MOVE A,T
JUMPGE A, TFLOT1
MOVNS A
MOVEI T,"-"
PUSHJ P,TOUT
TLZE A,400000
JRST FP1A
TFLOT1: TLNN A, 400
JRST TOC5 ;IF UNNORMALIZED, TYPE AS DECIMAL INTEGER
MOVEI B,0
CAMGE A,FT01
JRST FP4
CAML A,FT8
AOJA B,FP4
FP1A: MOVEI C,0
FP3: MULI A,400
ASHC B,-243(A)
SETZM TEM1 ;INIT 8 DIGIT COUNTER
SKIPE A,B ;DON'T TYPE A LEADING 0
PUSHJ P,FP7 ;PRINT INTEGER PART OF 8 DIGITS
PUSHJ P,TOC6 ;PRINT DECIMAL POINT
MOVNI A,10
ADD A,TEM1
MOVE W1,C
FP3A: MOVE T,W1
MULI T,12
PUSHJ P,FP7B
SKIPE W1
AOJL A,FP3A
POPJ P,
FP4: MOVNI C,6
MOVEI W2,0
FP4A: ASH W2,1
XCT FCP(B)
JRST FP4B
LDB W1,[POINT 23,FCP+1(B),35]
TXO W1,<IFIW 0>
FMPR A,@W1
IORI W2,1
FP4B: AOJN C,FP4A
PUSH P,W2 ;SAVE EXPONENT
PUSH P,FSGN(B) ;SAVE "E+" OR "E-"
PUSHJ P,FP3 ;PRINT OUT FFF.FFF PART OF NUMBER
POP P,W1 ;GET "E+" OR "E-" BACK
PUSHJ P,TEXT
POP P,A ;GET EXPONENT BACK
FP7: IDIVI A,12 ;DECIMAL OUTPUT SUBROUTINE
MOVMS B ;MAKE POSITIVE
AOS TEM1
PUSH P,B
JUMPE A,FP7A1
PUSHJ P,FP7
FP7A1: POP P,T
FP7B: ADDI T,260
JRST TOUT
353473426555 ;1.0E32
266434157116 ;1.0E16
FT8: 233575360400 ;1.0E8
216470400000 ;1.0E4
207620000000 ;1.0E2
204500000000 ;1.0E1
FT: 201400000000 ;1.0E0
026637304365 ;1.0E-32
113715126246 ;1.0E-16
146527461671 ;1.0E-8
163643334273 ;1.0E-4
172507534122 ;1.0E-2
FT01: 175631463146 ;1.0E-1
FT0=FT01+1
FCP: CAMLE A, FT0(C)
CAMGE A, FT(C)
Z FT0(C)
FSGN: ASCII .E-.
ASCII .E+.
;TEXT OUTPUT SUBROUTINES
;ROUTINE TO OUTPUT TEXT A LA $9T
TEXT9T: MOVE W1,T ;FOR LATER LSHC'S
TLNN W1,777000 ;LEFT JUSTIFIED UNLESS
LSH W1,^D36-^D9 ;LEFT-MOST CHAR NULL
TEXT9V: SETZ T, ;CLEAR OUT GARBAGE
LSHC T,^D9 ;GET NEXT CHARACTER
PUSHJ P,TOUT ;OUTPUT ONE ASCII CHARACTER
JUMPN W1,TEXT9V ;LOOP FOR ALL FOUR CHARACTERS POSSIBLE
POPJ P, ;ALL DONE
;ROUTINE TO OUTPUT TEXT A LA $8T
TEXT8T: MOVE W1,T ;COPY OF WORD FOR LSHC'S
TLNN W1,776000 ;LEFT JUSTIFIED TEXT UNLESS
LSH W1,^D36-^D8 ;LEFT-MOST CHARACTER NULL
TEXT8V: SETZ T, ;CLEAR OUT GARBAGE
LSHC T,^D8 ;GET NEXT CHARACTER
PUSHJ P,TOUT ;OUTPUT ONE ASCII CHARACTER
JUMPN W1,TEXT8V ;LOOP FOR ALL FOUR CHARACTERS
POPJ P, ;DONE
;ROUTINE TO OUTPUT TEXT A LA $7T
TEXTT: MOVE W1,T
TEXT: TLNN W1,774000 ;LEFT JUSTIFIED UNLESS LEFT CHAR IS NULL
LSH W1,35
TEXT2: MOVEI T,0 ;7 BIT ASCII TEXT OUTPUT SUBROUTINE
LSHC T,7
PUSHJ P,TOUT
JUMPN W1,TEXT2
POPJ P,
R50PNT: LSH T,-36 ;RADIX 50 SYMBOL PRINTER
TRZ T,3
PUSHJ P,TOC
PUSHJ P,TSPC
LDB T,[POINT 32,LWT,35] ;GET SYMBOL WITHOUT FLAGS
JRST PSYM1
SIXBP: MOVNI W2,6 ;SIXBIT PRINTER
MOVE W1,LWT
SIXBP1: MOVEI T,0
ROTC T,6
ADDI T,40
PUSHJ P,TOUT
AOJL W2,SIXBP1
POPJ P,
SUBTTL SYMBOL TABLE ROUTINES -- CHECK POINTERS
;SYMCHK -- SUBROUTINE TO CHECK OUT SYMBOL TABLE PTRS
;CALL IS:
;
; PUSHJ P,SYMCHK
; RETURN
;
;ARBITRARILY SETZM'S ANY POINTERS THAT ARE INVALID. IF THE UNDEFINED
;PTR IS INVALID, IT IS FIXED TO POINT TO THE END OF ONE OF THE
;DEFINED PTRS.
;
;USES R, S, AND T
SYMCHK:
IFE FTFILE,<
SKIPE SYMVAL ;HAS THIS ALREADY BEEN DONE?
POPJ P, ;YES, DON'T DO IT AGAIN
> ;END IFE FTFILE
SKIPGE T,@SYMP ;GET MAIN SYMBOL PTR
PUSHJ P,CHKSYP ;CHECK IT OUT
SETZM @SYMP ;INVALID
MOVEI R,.JBHSM ;HIGH SEG SYMBOL TABLE PTR
PUSHJ P,HFETCH ;GET IT
TDZA T,T ;NO HIGH SEG
PUSHJ P,CHKSYP ;CHECK OUT THE HIGH SEG PTR
SETZ T, ;NO GOOD
MOVEM T,SAVHSM ;STORE COPY OF HIGH SEG PTR OR ZERO
;NOW SEE IF .JBSYM AND .JBHSM POINT TO THE SAME TABLE. IGNORE .JBHSM IF SO.
SKIPGE @SYMP ;GOT A GOOD .JBSYM POINTER?
SKIPL SAVHSM ;AND A GOOD .JBHSM POINTER?
JRST SYMCH1 ;ONLY ONE, JUST USE IT
HRLO T,@SYMP ;GET START OF .JBSYM TABLE INTO LH
SUB T,@SYMP ;FORM END OF THE TABLE
HRLO S,SAVHSM ;GET START OF .JBHSM TABLE INTO LH
SUB S,SAVHSM ;FORM END OF ITS TABLE
XOR S,T ;COMPARE END ADDRESSES (IN LH'S)
TLNN S,-1 ;POINTING TO SAME TABLES?
SETZM SAVHSM ;YES, IGNORE .JBHSM POINTER
;NOW CHECK .JBUSY FOR VALIDITY, AND FIX IT IF IT'S WRONG.
SYMCH1: SKIPL R,@SYMP ;GOT A VALID SYMBOL TABLE?
MOVE R,SAVHSM ;NO, USE HISEG PTR IF ANY TO FIX UNDEF PTR
SKIPGE T,@USYMP ;GET UNDEFINED PTR IF ANY
PUSHJ P,CHKSYP ;A REAL ONE; CHECK IT OUT
JRST SYMCH2 ;BAD OR POSITIVE, FIX IT
JRST SYMCH4 ;POINTER IS OK
;HERE TO MAKE A BAD OR POSITIVE UNDEF PTR POINT TO THE END OF THE S.T.
SYMCH2: HRRZ R,R ;RH ONLY
MOVEM R,@USYMP ;STORE FOR OTHERS
MOVEM R,ESTUT ;STORE FOR UNDEFINED SYM ASSEMBLER
;HERE WHEN SYMBOL PTRS CHECKED OUT, NOW CHECK PRGM ($: PTR).
SYMCH4:
IFE FTFILE,<
SKIPN S,PRGM ;GET PTR, ONE THERE?
JRST SYMCH8 ;NO, PROCEED
JUMPGE S,SYMCH6 ;PROCEED IF S POINTS TO LOWSEG
MOVEI R,.JBHNM ;PRGM POINTS TO HISEG, GET HISEG NAME
PUSHJ P,HFETCH ; . . .
JRST SYMCH8 ;NO GOOD, CLEAR PRGM
CAME T,SEGNAM ;SAME HISEG?
JRST SYMCH8 ;NO, CLEAR PRGM
SKIPA T,SAVHSM ;YES, GET THE PTR THAT PRGM POINTS INTO
SYMCH6: MOVE T,@SYMP ;GET THE PTR THAT PRGM POINTS INTO
JUMPGE T,SYMCH8 ;IF NO TABLES, PRGM CERTAINLY INVALID
TXZ S,1B0 ;CONVERT S TO OFFSET INTO TABLE
HLRE R,T ;-LENGTH OF SYMBOL TABLE
MOVN R,R ;MAKE +LENGTH OF TABLE
CAML S,R ;PRGM INVALID UNLESS S IS WITHIN THE TABLE
SYMCH8: SETZM PRGM ;PRGM INVALID IN SOME WAY
SETOM SYMVAL ;WE NOW KNOW ABOUT SYMBOL TABLE PTRS
> ;END OF IFE FTFILE
POPJ P, ;RETURN
SUBTTL SYMBOL TABLE ROUTINES -- CONVERT SYMBOL TO VALUE
;EVAL -- ROUTINE TO FIND THE VALUE OF THE RADIX-50 SYMBOL IN SYM.
;EVALU -- LIKE EVAL, BUT SEARCHES THE UNDEFINED SYMBOL TABLE.
;CALL:
; <SET UP SYM>
; PUSHJ P,EVAL/EVALU
; NOT FOUND
; NORMAL RETURN
;
;CAN ALSO GO TO ERR IF SYMBOL TABLE FORMAT IS WRONG, OR MULDEF IF THE
;SYMBOL IS MULTIPLY-DEFINED.
;
;ON A NORMAL RETURN, THE ACS ARE SET UP AS FOLLOWS:
;
; T VALUE OF THE SYMBOL FOUND
; W1 SYMBOL INDEX OF SYMBOL FOUND
; W2 FLAGS OF SYMBOL FOUND
EVALU: PUSHJ P,USYSET ;SET UP TO LOOP OVER THE UNDEFINED SYMBOLS
AOJA R,EVAL1 ;LOOK AT ALL SYMBOLS, CONTINUE IN EVAL
EVAL: MOVE S,SYM ;GET SYMBOL
SETZ TT, ;INITIALIZE FOR CALLING LOKCSH
EVAL00: PUSHJ P,LOKCSH ;SEE IF IT IS IN THE CACHE
JRST EVAL0 ;NO, MUST SEARCH SYMBOL TABLE
MOVE T,SCAGE(TT) ;GET LOCAL FLAG FOR SYMBOL
TRNE T,1 ;WAS THIS AN OUTSIDE LOCAL SYMBOL?
JRST EVAL00 ;YES, SEARCH SOME MORE
MOVE T,SCVAL(TT) ;GET VALUE OF SYMBOL
TXC T,1B0 ;CHANGE TO SIGNED NUMBER
MOVE W1,SCIDX(TT) ;GET INDEX
MOVE W2,SCSYM(TT) ;AND SYMBOL NAME
JRST CPOPJ1 ;DONE
EVAL0: PUSHJ P,SYMSET ;SET UP TO LOOP OVER ALL SYMBOLS
SUBI R,1 ;SKIP FIRST MODULE NAME
EVAL1: TXZ F,MDLCLF!FANYSF ;NOT MULT DEFINED, HAVEN'T FOUND ANY YET
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;LOOP BACK HERE TO LOOK AT EACH NEW SYMBOL
EVAL2: SOSGE R ;POINT TO VALUE WORD OF NEXT SYMBOL
PUSHJ P,ADVSYM ;THIS POINTER USED UP, SEE IF MORE
SKIPA T,@SYPTR ;POINTING TO A GOOD SYMBOL, GET VALUE INTO T
JRST EVAL6 ;ALL DONE, GO SEE IF ANYTHING TO RETURN
SOSGE R ;POINT TO FLAGS AND NAME FOR THIS SYMBOL
PUSHJ P,ADVSYM ;WENT OFF END OF SYMBOL WINDOW?
SKIPA W2,@SYPTR ;OK, FETCH FLAGS AND NAME
JRST ERR ;VALUE BUT NO SYMBOL? BAD FORMAT!
TXZN W2,PNAME ;PROGRAM NAME OR ZERO WORD?
JRST [JUMPE W2,EVAL2 ;YES, IGNORE ZERO WORDS
TXO F,PNAMEF ;REMEMBER NO LONGER SEARCHING $:'D MODULE
JRST EVAL2] ;GET NEXT SYMBOL
CAME W2,SYM ;SYMBOL NAME MATCH WHAT WE'RE LOOKING FOR?
JRST EVAL2 ;NO, GET NEXT NAME
;HERE ON A MATCH. SEE IF WE SHOULD IGNORE IT, REMEMBER IT, OR RETURN IT.
MOVE W2,@SYPTR ;FETCH FLAGS AGAIN
TXNE W2,DELI ;SYMBOL DELETED FOR INPUT?
JRST EVAL2 ;YES, IGNORE IT
TXNN W2,GLOBL ;A GLOBAL SYMBOL?
TXNN F,PNAMEF ;OR A LOCAL IN THE $:'D MODULE?
JRST EVAL8 ;YES, STOP SEARCH AND RETURN IT TO CALLER
TXOE F,FANYSF ;NEED TO REMEMBER FOR LATER, FIRST TIME?
CAMN T,EVVAL ;OR SAME VALUE AS BEFORE?
JRST EVAL4 ;YES, ALL OK. REMEMBER NEW SYMBOL
TXO F,MDLCLF ;MULTIPLE MATCHES WITH DIFFERENT VALUES
JRST EVAL2 ;BUT KEEP LOOKING IN CASE WE FIND A GLOBAL
;HERE ON A MATCH WITH AN OUTSIDE LOCAL. REMEMBER IT, THEN KEEP LOOKING.
EVAL4: MOVEM W2,EVFLG ;REMEMBER FLAGS
MOVEM T,EVVAL ;REMEMBER VALUE
ADD R,R2IDX ;CONVERT R TO SYMBOL INDEX
MOVEM R,EVIDX ;SAVE SYMBOL INDEX OF TENTATIVE MATCH
SUB R,R2IDX ;PUT R BACK AS IT WAS
JRST EVAL2 ;KEEP LOOKING IN CASE WE FIND A GLOBAL
;HERE WHEN THE SEARCH IS ALL FINISHED. WE DIDN'T FIND A GLOBAL OR A
;LOCAL IN THE OPEN MODULE, SO SEE IF WE FOUND SOMETHING USEFUL ELSEWHERE.
EVAL6: TXNN F,FANYSF ;FIND ANYTHING?
POPJ P, ;NO, JUST GIVE AN ERROR
TXNE F,MDLCLF ;WAS WHAT WE FOUND UNIQUE?
JRST MULDEF ;NO, GO GIVE "M" ERROR
MOVE W1,EVIDX ;YES, SET IT UP IN RETURN ACS
MOVE W2,EVFLG ; . . .
MOVE T,EVVAL ; . . .
JRST CPOPJ1 ;RETURN OUTSIDE LOCAL TO CALLER
;HERE WHEN WE HAVE A MATCHING GLOBAL OR LOCAL IN THE OPEN MODULE.
;STOP THE SEARCH IMMEDIATELY AND RETURN THE VALUE TO THE CALLER.
EVAL8: MOVE W1,R2IDX ;T AND W2 SET UP, BUT NEED TO PUT INDEX IN W1
ADD W1,R ;CONVERT R TO SYMBOL INDEX IN W1
JRST CPOPJ1 ;RETURN GLOBAL OR INSIDE LOCAL TO CALLER
SUBTTL SYMBOL TABLE ROUTINES -- CONVERT VALUE TO SYMBOL
;THE SYMBOL TABLE CACHE ALGORITHMS:
;
;
;TO SPEED UP THE EXEC MODE DDTS (EXPECIALLY TOP-20 WITH HIDDEN SYMBOLS),
;A NEW SYMBOL TABLE CACHE EXISTS. ENTRIES ARE ADDED DYNAMICALLY AS
;DDT SEARCHES FOR THE PROPER SYMBOLS FOR TYPEOUT. SYMBOLS WHICH ARE
;TYPED INTO DDT DO NOT GET ADDED TO CACHE SINCE THAT WOULD INTRODUCE SOME
;OBSCURE BUGS IN SYMBOL TYPEOUT. BUT THE CACHE IS SEARCHED ON TYPEIN IN
;CASE WE ARE LUCKY AND THE SYMBOL IS ALREADY THERE. CARE MUST BE TAKEN
;THOUGH, SINCE ONLY LOCAL OR GLOBAL SYMBOLS ARE VALID FOR TYPEIN.
;
;THE CACHE REMEMBERS SYMBOL NAMES, ALONG WITH THEIR VALUE. BUT MOST
;IMPORTANTLY, THE RANGE OF A SYMBOL IS ALSO REMEMBERED, AND THE SYMBOL
;TABLE LOOKUP CODE WILL FIND THE RANGE FOR ANY SYMBOL IT RETURNS. THIS
;MAKES THE CACHE EXTREMELY GOOD, SINCE THOUSANDS OF VALUES MIGHT BE
;ASSOCIATED WITH A SINGLE SYMBOL NAME. ALONG WITH THE VALUE AND RANGE,
;THE SYMBOL TABLE INDEX, THE AGE OF THE SYMBOL, AND THE "SYMBOL IS LOCAL"
;FLAG IS REMEMBERED (SO THAT SYMBOLS WILL TYPE "#" PROPERLY). EVERY
;REFERENCE TO A SYMBOL UPDATES ITS AGE. IF THE CACHE IS FULL, THEN
;THE OLDEST SYMBOL IS DELETED TO MAKE ROOM FOR THE NEW SYMBOL. THE
;AGE VALUE FOR A SYMBOL IS SHIFTED LEFT 3 BITS, TO MAKE ROOM FOR THE
;"#" FLAG. THIS DOES NOT AFFECT COMPARISONS OF THE AGES.
;
;THE RANGE OF A SYMBOL MIGHT NOT BE KNOWN TOTALLY IN ALL CASES.
;THIS CAN OCCUR DUE TO THE DELETION OF ANOTHER SYMBOL WHICH PREVIOUSLY
;RESTRICTED THE RANGE OF A SYMBOL. OR THE SYMBOL MIGHT BE GLOBAL OR BE
;IN THE LOCAL MODULE. IN SUCH A CASE, SINCE THE SYMBOL TABLE SEARCHING
;CODE STOPS EARLY, THE RANGE IS KNOWN ONLY TO THE VALUE SEARCHED FOR.
;IF EVER THE RANGE NEEDS EXTENDING, THE CACHE LOGIC WILL DO THIS.
;
;NOTICE THAT THE SYMBOL CACHE WILL ONLY CONTAIN A SINGLE ENTRY FOR
;ANY PARTICULAR VALUE, BUT CAN CONTAIN MULTIPLE ENTRIES FOR A PARTICULAR
;SYMBOL NAME. THIS IS BECAUSE A NON-LOCAL SYMBOL MAY BE DEFINED TO HAVE
;DIFFERENT VALUES IN TWO SEPARATE MODULES, AND YET EACH SYMBOL IS THE
;BEST ONE TO USE FOR SOME RANGE OF NUMBERS.
;THE VALUE OF A SYMBOL STORED IN THE CACHE IS IN UNSIGNED FORMAT. THIS
;MEANS THAT BIT ZERO IS COMPLEMENTED. THE PURPOSE OF THIS IS SO THAT
;A SYMBOL RANGE WHICH CROSSES THE 0 AND 400000000000 BOUNDARIES WORKS
;PROPERLY. COMPLEMENTING THE SIGN BIT ORDERS ALL VALUES SO THAT ZERO
;IS LOWEST, UP THROUGH 377777,,-1, TO 400000,,0 AND UP TO -1,,-1.
;THIS IS THE PREFERED ORDER, SINCE THEN ZERO WILL NEVER BE FOO+N, AND
;A VALUE OF 400000,,0 WILL PROPERLY TYPE OUT AS FOO+N.
;
;ENTRIES IN THE CACHE HAVE TO BE DELETED AT THE PROPER TIME. WHENEVER
;A SYMBOL IS REDEFINED, THE CACHE HAS TO BE CLEARED OF BOTH THE SYMBOL
;NAME, AND ALSO OF THE NEW VALUE. OTHERWISE, WRONG TYPEOUT WILL RESULT.
;THIS HAPPENS EXPLICITLY FOR A SYMBOL WHEN YOU GO SYMBOL:, OR IMPLICITLY
;WHEN YOU USE THE PATCHING FEATURE. THE CACHE HAS TO BE CLEARED TOTALLY
;WHENEVER THE PROGRAM MODULE IS CHANGED, SINCE ALL NON-EXACT SYMBOLS CAN
;NOW BE WRONG. THIS FEATURE CAN BE USED TO CLEAR THE CACHE AT ANY TIME,
;IN CASE YOU THINK THAT THE CACHE CONTAINS WRONG DATA.
;
;ALL OF THE SYMBOL NAMES WHICH ARE USED IN THE CACHE LOGIC HAVE THE
;FORM OF SC???.
;LOOK -- ROUTINE TO FIND A NAME FOR THE VALUE IN T.
;CALL:
; MOVE T,<VALUE>
; PUSHJ P,LOOK
; NOTHING USEFUL FOUND
; SOMETHING, BUT NO EXACT MATCH
; EXACT MATCH FOUND AND TYPED
;
;
;THIS ROUTINE RETURNS THE FOLLOWING (ON WHICH RETURNS):
;
; T ORIGINAL VALUE (ALL)
; W VALUE OF SYMBOL FOUND (+2,+3)
; W2 SYMBOL FOUND (+2,+3)
; S DIFFERENCE, T-W (+2)
;
;NOTE THAT THE COMPUTATIONS DONE BY THIS ROUTINE USE UNSIGNED INTEGERS,
;WHICH HAVE BIT 0 COMPLEMENTED. THE SYMBOL VALUES STORED IN THE CACHE
;ARE OF THIS FORMAT ALSO.
LOOK: TXC T,1B0 ;CONVERT TO UNSIGNED FORMAT
TXZ F,MDLCLF ;INITIALIZE FLAG
HRLOI W1,377777 ;SET UP INFINITE AGE
HRLZ TT,SCNUM ;GET NUMBER OF SYMBOLS NOW IN CACHE
JUMPE TT,CSHEMP ;SKIP SOME IF CACHE IS EMPTY
MOVN TT,TT ;CONVERT TO AN AOBJN POINTER
SRCCSH: CAMG W1,SCAGE(TT) ;THIS ENTRY OLDER THAN PREVIOUS ONES?
JRST SRCCH1 ;NO
MOVE W1,SCAGE(TT) ;YES, REMEMBER ITS AGE
HRRZ W2,TT ;AND THE INDEX OF IT
SRCCH1: CAML T,SCVAL(TT) ;VALUE LESS THAN THIS SYMBOL?
CAMLE T,SCMAX(TT) ;OR GREATER THAN MAXIMUM VALUE FOR SYMBOL?
AOBJN TT,SRCCSH ;YES, LOOK AT NEXT SYMBOL IN CACHE
JUMPL TT,[MOVE TT1,SCAGE(TT) ;IF FOUND SYMBOL, GET FLAGS
TRNE TT1,1 ;SEE IF SHOULD HAVE # AFTER IT
TXO F,MDLCLF ;YES, REMEMBER THAT
JRST LOOKDN] ;PROCEED
CAIL TT,SCSIZ ;IS THE CACHE FILLED UP?
MOVE TT,W2 ;YES, THEN WE'LL REPLACE THE OLDEST SYMBOL
CSHEMP: MOVEM TT,SCTMP ;REMEMBER INDEX WE MIGHT REPLACE
PUSHJ P,LOKSYM ;SEARCH SYMBOL TABLE FOR A SYMBOL
MOVE S,W2 ;MOVE FOUND SYMBOL TO RIGHT AC
SETZ TT, ;INITIALIZE FOR LOOP
CSHEM1: PUSHJ P,LOKCSH ;SEE IF HAVE THE SYMBOL IN THE CACHE
JRST NEWSCH ;NO, HAVE TO INSERT IT
CAME W,SCVAL(TT) ;FOUND THE RIGHT ENTRY FOR THIS SYMBOL?
JRST CSHEM1 ;NO, LOOK SOME MORE
CAMLE R,SCMAX(TT) ;YES, SEE IF MAXIMUM CAN BE RAISED
MOVEM R,SCMAX(TT) ;YES, RAISE IT
JRST LOOKDN ;GO FINISH UP
NEWSCH: TXZ W2,74B5 ;CLEAR SYMBOL FLAGS
MOVE TT,SCTMP ;GET BACK INDEX TO USE IN CACHE
MOVEM W2,SCSYM(TT) ;REMEMBER THE SYMBOL NAME
MOVEM W1,SCIDX(TT) ;REMEMBER ITS INDEX
MOVEM W,SCVAL(TT) ;AND ITS VALUE
MOVEM R,SCMAX(TT) ;SET MAXIMUM KNOWN VALUE FOR SYMBOL TOO
HRRZ TT1,TT ;GET INDEX WITHOUT JUNK IN LEFT HALF
CAMN TT1,SCNUM ;INSERTED A NEW ENTRY IN THE CACHE?
AOS SCNUM ;YES, INCREMENT SYMBOL COUNT
LOOKDN: AOS TT1,SCTIM ;INCREMENT AGE TIMER
LSH TT1,3 ;MAKE ROOM FOR FLAGS
TXNE F,MDLCLF ;WAS THIS SYMBOL FOUND OUTSIDE LOCAL MODULE?
IORI TT1,1 ;YES, REMEMBER THAT
MOVEM TT1,SCAGE(TT) ;SET NEW AGE FOR THIS SYMBOL
MOVE W2,SCSYM(TT) ;GET SYMBOL NAME WE FOUND
MOVE W1,SCIDX(TT) ;GET INDEX OF THIS SYMBOL
MOVE W,SCVAL(TT) ;AND THE VALUE OF THE SYMBOL
TXC W,1B0 ;CONVERT BACK TO SIGNED NUMBERS
TXC T,1B0 ;FROM UNSIGNED
MOVE S,T ;[264] COMPUTE DIFFERENCE BETWEEN VALUES
XOR T,W ;[264] TEMPORARILY TRASH T TO COMPARE SIGNS
JUMPGE T,LOOKD1 ;[264] EASY CASE IF SIGNS THE SAME
TXC S,1B0 ;[264] HARD CASE--MAKE SIGNS THE SAME
SUB S,W ;[264] NOW SUB IS SAFE
TXCA S,1B0 ;[264] FIX UP THE RESULT
LOOKD1: SUB S,W ;[264] NORMAL SUB WORKS IF SIGNS THE SAME
XOR T,W ;[264] RESTORE T
JUMPE W2,CPOPJ ;ALWAYS IGNORE A NULL SYMBOL
JUMPN S,CPOPJ1 ;IF NOT EXACT, GIVE SINGLE SKIP
PUSHJ P,PSYM0 ;PRINT AND REMEMBER FOR $D
TXNE F,MDLCLF ;IS IT NOT AMBIGUOUS?
TXNE F,OKAF ;OR IS IT OK TO BE SO?
JRST CPOPJ2 ;YES, DON'T TYPE SOMETHING
PUSH P,T ;SAVE T
MOVEI T,"#" ;FLAG POSSIBLY AMBIGUOUS
PUSHJ P,TOUT ;TYPE THE #
POP P,T ;RESTORE AC
CPOPJ2: AOS (P) ;DOUBLE SKIP RETURN
CPOPJ1: AOS (P) ;SINGLE SKIP RETURN
CPOPJ: POPJ P, ;RETURN
;SUBROUTINE TO SEARCH FOR A SYMBOL NAME IN THE SYMBOL CACHE. CALL:
;
; SETZ TT, ;(FIRST CALL ONLY) INITIALIZE FOR LOOP
; MOVE S,SYMBOL ;GET SYMBOL
; PUSHJ P,LOKCSH ;SEARCH CACHE FOR IT
; (NOT FOUND RETURN) ;NOT THERE
; (FOUND RETURN) ;FOUND IT, INDEX INTO CACHE IN TT
;
;EACH SUCCESSIVE CALL WITHOUT DESTROYING AC TT WILL RETURN THE NEXT
;OCCURANCE OF THE SPECIFIED SYMBOL IN THE CACHE. ONLY USES AC'S S AND TT.
LOKCSH: JUMPL TT,LOKCS1 ;GO ON IF JUST CONTINUING SEARCH
TXZ S,74B5 ;CLEAR FLAG BITS FROM SYMBOL
HRLZ TT,SCNUM ;GET NUMBER OF SYMBOLS IN CACHE
JUMPE TT,CPOPJ ;QUIT IF NO SYMBOLS IN CACHE
MOVN TT,TT ;MAKE INTO AOBJN POINTER
CAME S,SCSYM(TT) ;IS THIS THE SYMBOL?
LOKCS1: AOBJN TT,.-1 ;NO, SEARCH SOME MORE
JUMPL TT,CPOPJ1 ;SKIP RETURN IF FOUND IT
POPJ P, ;OTHERWISE NON-SKIP
;SUBROUTINE TO CLEAR THE SYMBOL TABLE CACHE. CACHE IS INITIALIZED WHEN
;DDT IS ENTERED, MODULE NAME IS CHANGED, NEW SYMBOL IS DEFINED, ETC.
;NO AC'S ARE USED. TO MAKE DEBUGGING FASTER, EXEC-MODE DDTS WILL NOT
;CLEAR THE CACHE WHENEVER CONTROL RETURNS TO DDT (SUCH AS A BREAKPOINT).
;LOCATION .CLCSH CAN BE PATCHED TO DO SO IF THE PROBLEM CHANGES THE
;SYMBOL TABLE, AND THE CACHE CODE HAS TO BE "RIGHT". SIMILARLY, IF THE
;SYMBOL TABLE ISN'T BEING MESSED UP IN USER MODE, .CLCSH CAN BE PATCHED
;TO MAKE DEBUGGING FASTER THERE TOO.
.CLCSH: IFN FTEXEC!FTMON!FTEX20,<POPJ P,> ;HERE FOR EXEC DDTS
IFE FTEXEC!FTMON!FTEX20,<JFCL> ;ALL OTHER DDTS
CLRCSH: SETZM SCNUM ;CLEAR NUMBER OF SYMBOLS IN CACHE
SETZM SCTIM ;RESET AGE TIMER
POPJ P, ;DONE
;SUBROUTINES TO FIND AN ENTRY IN THE CACHE AND REMOVE IT. CALL
;DELCSH WITH SYMBOL NAME IN S, OR CALL DELCSV WITH THE VALUE OF
;A SYMBOL (NORMAL FORMAT) IN S.
DELCSV: HRLZ TT,SCNUM ;GET NUMBER OF SYMBOLS
JUMPE TT,CPOPJ ;IF NONE, DONE
MOVN TT,TT ;MAKE AN AOBJN POINTER
TXC S,1B0 ;TURN INTO UNSIGNED FORMAT FOR COMPARES
CAML S,SCVAL(TT) ;THIS SYMBOL VALUE TOO SMALL?
CAMLE S,SCMAX(TT) ;OR TOO LARGE?
AOBJN TT,.-2 ;YES, TRY NEXT ENTRY
JUMPL TT,CSHREM ;JUMP IF FOUND SYMBOL TO DELETE
POPJ P, ;NOT FOUND, DONE
DELCSH: SETZ TT, ;BEGIN AT THE BEGINNING
PUSHJ P,LOKCSH ;FIND THE SYMBOL IN THE CACHE
POPJ P, ;NOT THERE, SO ALL DONE
PUSHJ P,CSHREM ;REMOVE THE ENTRY
JRST DELCSH ;LOOK FOR ANOTHER OCCURANCE
CSHREM: SOS TT1,SCNUM ;DECREMENT NUMBER OF ENTRIES IN CACHE
MOVE TT2,SCSYM(TT1) ;GET SYMBOL AT END
MOVEM TT2,SCSYM(TT) ;WRITE OVER DELETED SYMBOL
MOVE TT2,SCIDX(TT1) ;GET INDEX
MOVEM TT2,SCIDX(TT) ;WRITE OVER OLD INDEX
MOVE TT2,SCVAL(TT1) ;GET VALUE
MOVEM TT2,SCVAL(TT) ;WRITE OVER VALUE
MOVE TT2,SCMAX(TT1) ;GET MAXIMUM VALUE
MOVEM TT2,SCMAX(TT) ;REPLACE IT TOO
MOVE TT2,SCAGE(TT1) ;FINALLY GET AGE
MOVEM TT2,SCAGE(TT) ;REPLACE IT
POPJ P, ;DONE
SUBTTL NON-CACHE ROUTINE TO CONVERT A VALUE TO A SYMBOL
;THIS ROUTINE SEARCHES THE NORMAL SYMBOL TABLE FOR THE SPECIFIED VALUE,
;AND RETURNS THE APPROPRIATE SYMBOL FOR THAT VALUE. CALL:
;
; MOVE T,VALUE
; PUSHJ P,LOKSYM
; (RETURN)
;
;WITH: W2/ SYMBOL WHICH WAS FOUND. ZERO IF NONE.
; W1/ SYMBOL INDEX OF SYMBOL IN W2.
; W/ VALUE OF THE FOUND SYMBOL.
; R/ HIGHEST VALUE THE FOUND SYMBOL IS USEFUL FOR IN TYPEOUT.
; T/ NOT CHANGED.
;
;ALL VALUES IN THIS ROUTINE ARE IN UNSIGNED FORMAT (BIT 0 IS COMPLEMENTED).
LOKSYM: PUSH P,T ;SAVE SOUGHT VALUE OVER SYMSET
HRLOI T,377777 ;GET INFINITY AS A BOUND
MOVEM T,LKMAX ;INITIALIZE VALUE SYMBOL IS GOOD FOR
PUSHJ P,SYMSET ;SET UP TO LOOP OVER ALL SYMBOLS
POP P,T ;RESTORE T
SUBI R,1 ;SKIP FIRST MODULE NAME
TXZ F,FANYSF ;HAVEN'T FOUND ANYTHING YET
;LOOP BACK HERE TO LOOK AT EACH NEW SYMBOL.
LOOK2: SOSGE R ;ANY MORE SYMBOLS TO LOOK AT?
PUSHJ P,ADVSYM ;MAYBE NOT, GO SEE
SKIPA W,@SYPTR ;GOT ANOTHER ONE, GET ITS VALUE INTO W
JRST LOOK10 ;ALL DONE, GO SEE IF ANYTHING TO RETURN
TXC W,1B0 ;CONVERT TO UNSIGNED FORMAT
SOSGE R ;BACK UP TO NAME WORD
PUSHJ P,ADVSYM ;HAPPENS ONLY IF WINDOWING
SKIPA W2,@SYPTR ;FETCH THE NAME
JRST ERR ;NO NAME?? BAD FORMAT!
TXNN W2,PNAME ;IS THIS A PROG NAME OR ZERO WORD?
JRST [JUMPE W2,LOOK2 ;IGNORE ZERO WORDS
TXO F,PNAMEF ;REMEMBER NO LONGER IN $:'D MODULE
JRST LOOK2] ;GET NEXT SYMBOL
TXNN W2,DELI!DELO ;IS SYMBOL DELETED?
TXNN W2,-1-PNAME ;OR IS IT BLANK?
JRST LOOK2 ;YES, DON'T CONSIDER IT
CAMLE W,T ;ONLY CONSIDER SYMS .LE. WHAT WE'RE LOOKING FOR
SOJA W,[CAMGE W,LKMAX ;VALUE OF SYMBOL LESS THAN OLD MAX?
MOVEM W,LKMAX ;YES, REDUCE VALIDITY OF SYMBOL
JRST LOOK2] ;CONTINUE LOOKING
TXNN W2,GLOBL ;IS THIS A GLOBAL SYMBOL?
TXNN F,PNAMEF ;OR A LOCAL IN THE OPEN MODULE?
JRST LOOK4 ;YES, SEE IF WE CAN RETURN IT IMMEDIATELY
CAMGE T,[400000,,000020] ;IN AC RANGE?
JRST LOOK2 ;YES, IGNORE OUTSIDE LOCALS
TXO F,OLF ;REMEMBER LAST SYMBOL SAVED WAS OUTSIDE LOCAL
JRST LOOK6 ;SAVE THE SYMBOL IN CASE BEST EVER FOUND
;HERE WHEN A GLOBAL OR INSIDE LOCAL IS CLOSE ENOUGH. IF IT MATCHES EXACTLY,
;THEN STOP THE SEARCH AND RETURN IT IMMEDIATELY. IF NOT, SAVE IT IN CASE
;WE NEVER FIND AN EXACT MATCH, THEN CONTINUE SEARCHING.
LOOK4: TXZ F,OLF ;REMEMBER NOT AN OUTSIDE LOCAL
CAME W,T ;EXACT MATCH?
JRST LOOK6 ;NO, JUST GO REMEMBER IT
MOVE W1,R2IDX ;YES, WANT TO RETURN SYMBOL INDEX IN W1
ADD W1,R ;FORM INDEX
TXZ F,MDLCLF ;REMEMBER NOT AN OUTSIDE LOCAL
MOVE R,T ;ONLY KNOW SYMBOL IS GOOD FOR GIVEN VALUE
POPJ P, ;RETURN
;HERE WHEN WE HAVE A POSSIBLE MATCH. IF A BETTER OUTSIDE LOCAL OR A
;GLOBAL OR INSIDE LOCAL AT LEAST AS GOOD AS THE SYMBOL ALREADY SAVED
;(IF ANY), SAVE IT IN CASE IT'S THE BEST EVER FOUND. MDLCLF IS USED
;TO REMEMBER WHETHER WHAT WE HAVE SAVED IS AN OUTSIDE LOCAL OR NOT.
LOOK6: TXON F,FANYSF ;IS THIS THE FIRST SYMBOL?
JRST LOOK8 ;YES, JUST GO SQUIRREL IT AWAY
CAMGE W,LKVAL ;IS OUR NEW SYMBOL DEFINITELY WORSE?
JRST LOOK2 ;YES, DON'T WASTE ANY MORE TIME
TXNE F,OLF ;AN OUTSIDE LOCAL?
CAME W,LKVAL ;YES, MUST BE BETTER TO BE SAVED, IS IT?
JRST LOOK8 ;WE WANT TO SAVE THIS SYMBOL
JRST LOOK2 ;DON'T SAVE THIS SYMBOL, JUST KEEP LOOKING
;HERE TO SAVE THE CURRENT SYMBOL.
LOOK8: TXNN F,OLF ;IS THIS SYMBOL AN OUTSIDE LOCAL?
TXZA F,MDLCLF ;NO, REMEMBER THAT
TXO F,MDLCLF ;YES, REMEMBER THAT
MOVEM W,LKVAL ;SAVE VALUE
MOVEM W2,LKFLG ;SAVE FLAGS
ADD R,R2IDX ;FORM SYMBOL INDEX
MOVEM R,LKIDX ;SAVE THAT TOO
SUB R,R2IDX ;AS BEFORE
JRST LOOK2 ;RESUME THE SEARCH
;HERE WHEN WE HAVE SEARCHED THE ENTIRE SYMBOL TABLE. RETURN THE BEST
;SYMBOL WE FOUND, IF ANY.
LOOK10: MOVE R,LKMAX ;GET HIGHEST VALUE THAT SYMBOL IS GOOD FOR
TXNN F,FANYSF ;FIND ANYTHING?
JRST [SETZ W2, ;NO, CLEAR SYMBOL NAME
MOVX W,1B0 ;AND GET VALUE OF MINUS INFINITY
POPJ P,] ;RETURN
MOVE S,T ;YES, FIGURE OUT HOW FAR OFF IT WAS
SUB S,LKVAL ;OFFSET INTO S
MOVE W,LKVAL ;PUT VALUE INTO W FOR RETURN
MOVE W1,LKIDX ;INDEX INTO W1
MOVE W2,LKFLG ;FLAGS INTO W2
POPJ P, ;RETURN
SUBTTL SYMBOL TABLE ROUTINES -- HARDWARE OPCODE PROCESSING
;DESCRIPTION OF OP DECODER FOR DDT:
;
; THE ENTIRE INSTRUCTION SET FOR THE PDP-6 CAN BE COMPACTED INTO
;A SPACE MUCH SMALLER THAN ONE REGISTER FOR EVERY SYMBOL. THIS OCCURS
;BECAUSE OF THE MACHINE ORGANIZATION AND INSTRUCTION MNEMONICS CHOSEN
;FOR THE PDP-6. FOR EXAMPLE, IF BITS (0-2) OF AN INSTRUCTION EQUAL
;101(2) THE INSTRUCTION IS A HALF WORD INSTRUCTION AND AN "H" MAY
;BE ASSUMED. "T" MAY BE ASSUMED FOR ALL TEST INSTRUCTIONS (WHICH
;BEGIN WITH 110(2).
;
; THE TABLE TBL IN DDT CONSISTS OF 9 BIT BYTES, 4 TO A WORD.
;THE NUMBERS IN THE BYTES HAVE THE FOLLOWING SIGNIFICANCE:
;0-37(8): THIS IS A DISPATCH COMMAND FOR THE OP-DECODER INTERPRETER.
; LET THE RIGHT MOST TWO BITS EQUAL N; LET THE NEXT 3 BITS
; EQUAL P.
;
; THE CONTENTS OF INST (INSTRUCTION) CONTAIN IN THE RIGHT
; MOST NINE BITS THE BINARY FOR THE MACHINE INSTRUCTION.
; P AND N REFER TO THE CONTENTS OF INST, AND THE OP DECODER
; WILL PRODUCE AN ANSWER D GIVEN P, N, AND THE CONTENTS
; OF INSTX N+1 GIVES THE NUMBER OF BITS IN INST; P GIVES THE
; POSITION (FROM THE RIGHT EDGE) OF THE N+1 BITS.
;
; EXAMPLE: P = 6
; N = 2
;
; C(INST) = .010 101 100(2)
;
; THE RESULT = D = 010(2) = 2(8)
;
; D IS USED AS A DISPATCH ON THE NEXT BYTES IN THE TABLE.
; IF D = 5, 5 BYTES IN THE TABLE (DON'T COUNT THE BYTES WHICH
; PRINT TEXT OR ARE THE EXTEND BYTE, 41-73(8))
; ARE SKIPPED OVER AND THE 6TH BYTE RESUMES
; THE INTERPRETATION.
;
;40(8) THIS IS A STOP CODE; WHEN THIS IS REACHED INTERPRETATION
; IS FINISHED.
;41(8)-72(8) THE ALPHABET IS ENCODED INTO THIS RANGE.
; 41- A
; 42- B
; 72- Z
; WHEN A BYTE IN THIS RANGE IS REACHED, ITS CORRESPONDING
; LETTER IS TYPED.
;73(8) THIS IS THE "EXTEND" BYTE. THE NEXT BYTE IN THE TABLE
; IS A TRANSFER BYTE BUT MUST HAVE THE ADDRESS EXTENDED
; BY <1000-74*2+FIR.> FIRST.
;
;74(8)-777(8) THIS IS A TRANSFER BYTE. IF THE BYTE IN THIS RANGE IS
; CONSIDERED TO BE A, TRANSFER INTERPRETATION TO THE
; <A-74(8)+FIR.>RD BYTE IN THE TABLE.
;
;MACROS ASSEMBLE THE TABLE TBL:
; 1. A NUMBER FOLLOWED BY ^ ASSEMBLES A DISPATCH BYTE. THE FIRST
; DIGIT IS THE POSITION; THE SECOND DIGIT IS THE SIZE.
; 2. A POINT (.) ASSEMBLES A STOP CODE.
; 3. A NAME FOLLOWED BY A SLASH ASSEMBLES A TRANSFER TO THE
; SYMBOLICALLY NAMED BYTE.
; 4. A STRING OF LETTERS TERMINATED BY A SPACE, COMMA, OR POINT,
; ASSEMBLE INTO A STRING OF BYTES, EACH BYTE BEING ONE LETTER.
;
;EXAMPLE OF BINARY TO SYMBOLIC DECODING:
; THE MACHINE CODE FOR JRST IS 254
; INST 0 1 0 1 0 1 1 0 0
; THE INTERPRETER STARTS WITH THE FIRST BYTE IN THE TABLE (63^).
; THE RESULT OF APPLYING THIS TO C(INST) GIVES 2. SKIPPING OVER
; 2 BYTES IN THE TABLE AND INTERPRETING THE THIRD RESULTS IN
; HAK/ BEING INTERPRETED. AT HAK:, THERE IS A 33^. APPLYING
; THIS TO C(INST) RESULTS IN 5 NON PRINTING BYTES BEING SKIPPED
; OVER:
; 1. MV/
; MOV PRINTING TEXT
; 2. MO/
; 3. ML/
; 4. DV/
; 5. SH/
;
;H1/ IS THE NEXT BYTE INTERPRETER. AT H1: 03^ IS FOUND SO
;4 BYTES ARE SKIPPED OVER:
; EXC PRINTING TEXT
; 1. S3/
; BL PRINTING TEXT
; T PRINTING TEXT
; 2. .
; 3. AO/
; 4. AOB/
; THE NEXT LETTERS JRS ARE TYPED OUT. THEN T/ IS FOUND. AT
;T; A T IS TYPED OUT; THEN A "." IS FOUND AND EVERYTHING STOPS.
;
; THE TABLE IS ALSO USED GOING FROM SYMBOLIC TO BINARY BUT A
; TREE SEARCH METHOD IS USED.
;.ADR - DECLARE TAG; .TRA - TRANSFER BYTE; .TRAX - EXTENDED TRANSFER
;BYTE; .DIS - DISPATCH BYTE; .TXT - TEXT BYTES; .END - TEXT BYTES
;FOLLOWED BY STOP BYTE.
DEFINE BYT9 (A) <
XLIST
IRP A,<
A>
LIST>
IF1,<
DEFINE .ADR (A) <
%'A== CLOC
FIR.== CLOC
DEFINE .ADR (B) <
%'B== CLOC
LASTB==CLOC+74-FIR.>>
DEFINE .TRA (A)<CLOC==CLOC+1>
DEFINE .TRAX (A)<CLOC==CLOC+2>
SYN .TRA, .DIS
DEFINE .TXT (A) <
IFNB <A>, <IRPC A,<CLOC==CLOC+1>>>
DEFINE .END (A) <
IFNB <A>, <IRPC A,<CLOC==CLOC+1>>
CLOC== CLOC+1>
> ;END OF IF1
IF2,<
DEFINE .ADR (A)<IFN %'A-CLOC,<PRINTX PHASE ERR AT: %'A>>
DEFINE .TRA (A) <OUTP %'A+74-FIR.>
DEFINE .TRAX (A),<OUTP 73
OUTP 74+<Z1==%'A-FIR.-1000+74>
IFL Z1,<PRINTX "A" TOO SMALL FOR .TRAX>>
DEFINE .DIS (A) <OUTP A&70/2+A&7-1>
DEFINE .TXT (A) <IFNB <A>,<IRPC A,<OUTP "A"-40>>>
DEFINE .END (A) <
IFNB <A>, <IRPC A,<OUTP "A"-40>>
OUTP 40>
DEFINE OUTP (A)<
IFGE <A>-1000,<PRINTX OPTABLE BYTE "A" TOO BIG>
IFE <BINC==BINC-9>-^D27,<BINR1==A>
IFE BINC-^D18,<BINR2==A>
IFE BINC-9,<BINR3==A>
IFE BINC,< BYTE (9) BINR1,BINR2,BINR3,<A>
BINC==^D36>
CLOC==CLOC+1 >
>
TBL: .XCREF ;OPDECODER BYTE TABLE
CLOC== 0 ;SET BYTE LOCATION COUNTER TO 0
BINC== ^D36 ;INIT BYTES/WORD COUNTER
;**********THE ARGUMENT FOR THE FOLLOWING "BYT9" MACRO
;**************TERMINATES AT THE NEXT COMMENT WITH: **************
;NOTE UUO'S LEFT IN TOPS-20 USER DDT (FOR NOW) FOR DEBUGGING
;COMPATIBLE PROGRAMS
IFN FTDEC20&<FTEXEC!FTMON>,<
BYT9 <
.DIS 63,.END,.TRA FLO,.TRA HAK,.TRA ACCP,.TRA BOOLE
.TXT H,.TRA HWT,.TXT T,.TRA ACBM>
> ;END IFN FTDEC20
IFE FTDEC20&<FTEXEC!FTMON>,<
BYT9 <
.DIS 63,.TRA UUO,.TRA FLO,.TRA HAK,.TRA ACCP,.TRA BOOLE
.TXT H,.TRA HWT,.TXT T,.TRA ACBM>
> ;END IFE FTDEC20
BYT9 <
;IO INSTRUCTIONS
.DIS 21,.TRA BD,.TXT CON,.DIS 11,.TRA OI,.TXT S,.DIS 01,.TRA Z,.TRA O
.ADR BD,.DIS 01,.TXT BLK,.TRA IO,.TXT DATA,.ADR IO,.DIS 11,.TRA I,.TRA O
.ADR OI,.DIS 01,.TRA O,.TRA I
;UUOS
.ADR UUO,.DIS 51,.END,.TXT,.DIS 32,.TRA U40,.TRAX U50,.TRA U60
.DIS 21,.TRAX U703,.DIS 11,.TRA USET,.DIS 01
.TXT LOOKU,.TRA P,.TXT ENTE,.TRA R,.ADR USET,.TXT USET,.DIS 01,.TRA I,.TRA O
.ADR U40,.DIS 03,.END,.TXT INI,.TRA T,.END,.END,.END,.END,.END,.TXT CALL,.TRA I
.ADR U60,.DIS 21,.TRA U603,.DIS 01,.TXT IN,.TRA BPUT,.TXT OUT
.ADR BPUT,.DIS 11,.TXT BU,.ADR F,.END F,.TXT,.TXT PU,.TRA T
.ADR U603,.DIS 01,.TRA U6062,.TXT STAT,.DIS 11,.ADR O,.END O,.TXT,.ADR Z,.END Z,.TXT
.ADR U6062,.DIS 11,.TXT S,.TRA U62,.TXT G,.ADR U62,.TXT ETST,.TRA S
;BYTE AND FLOATING INSTRUCTIONS
.ADR FLO,.DIS 51,.TRA BYTE,.TXT F,.DIS 32,.TXT,.TXT AD,.TRA A,.TXT SB
.TRA A,.TXT MP,.TRA A,.TXT DV,.ADR A
.DIS 21,.TRA LMB,.TXT R,.TRA IMB,.ADR LMB,.DIS 02,.END,.TXT
.ADR L,.END L,.TXT,.ADR M,.END M,.TXT
.ADR B,.END B,.TXT,.ADR BYTE,.DIS 32,.TRAX I100,.TRAX I110,.TRA I120,.TXT
.DIS 03,.TXT UF,.TRA PA,.TXT DF,.TRA N
.TXT FS,.TRA C,.TXT IB,.ADR P,.END P,.TXT,.TXT I,.TRA LD
.ADR LD,.TXT LD,.TRA B,.TXT I,.TRA DP,.ADR DP,.TXT DP,.TRA B
;FWT-FIXED POINT ARITH-MISC
.ADR HAK,.DIS 33,.TRA MV,.ADR MV,.TXT MOV,.TRA MO,.TRA ML,.TRA DV
.TRA SH,.TRA H1,.TRA JP
.DIS 21,.TXT ADD,.TRA IMB,.TXT SU,.ADR BIMB,.TXT B,.ADR IMB,.DIS 02,.END,.TXT
.ADR I,.END I,.TXT,.TRA M,.TRA B,.ADR MO,.DIS 22
.ADR EIMS,.TXT E,.TRA IMS,.TXT S,.TRA IMS,.TXT N,.TRA IMS,.TXT M
.ADR IMS,.DIS 02,.END,.TXT,.TRA I,.TRA M,.ADR S,.END S,.TXT
.ADR ML,.DIS 21,.TXT I,.TRA ML1,.ADR ML1,.TXT MUL,.TRA IMB
.ADR DV,.DIS 21,.TXT I,.TRA DV1
.ADR DV1,.TXT DI,.ADR DV2,.TXT V,.TRA IMB,.ADR H1,.DIS 03,.TXT EXC,.TRA S3,.TXT BL
.ADR T,.END T,.TXT,.TRA AO,.ADR AO,.TXT AOBJ
.TRA AOB,.TXT JRS,.TRA T,.TXT JFC,.TRA L,.TXT XC,.TRA T,.TXT MA,.TRA P
.ADR AOB,.DIS 01,.TRA P,.TRA N
.ADR JP,.DIS 03,.TRA PU,.ADR PU,.TXT PUSH,.TRA PUS,.TRA PO
.ADR PO,.TXT POP,.TRA POP,.TXT JS,.ADR R,.END R,.TXT
.TXT JS,.TRA P,.TXT JS,.ADR PA,.END A,.TXT,.TXT JR,.TRA PA
.ADR PUS,.DIS 01,.ADR J,.END J,.END,.TXT,.ADR POP
.DIS 01,.END,.TXT,.TRA J,.ADR SH,.DIS 02,.TXT A,.TRA S2,.TXT ROT,.TRA S1,.TXT L
.ADR S2,.TXT S,.ADR S3,.TXT H,.TRA S1,.DIS 21,.TXT JFF,.TRA O,.END
.ADR S1,.DIS 21,.END,.TXT,.ADR C,.END C,.TXT
;ARITH COMP-SKIP-JUMP
.ADR ACCP,.DIS 42,.TXT CA,.TRA CA1,.TRA SJ,.TXT A,.TRA JS,.TXT S
.ADR JS,.TXT O,.DIS 31
.TXT J,.TRA COMP,.TXT S,.TRA COMP,.ADR CA1,.DIS 31,.TXT I,.TRA COMP,.TXT M,.TRA COMP
.ADR SJ,.DIS 31,.TXT JUM,.TRA PSJ,.TXT SKI,.ADR PSJ,.TXT P,.ADR COMP
.DIS 03,.END,.TXT,.TRA L,.ADR E,.END E,.TXT,.TXT L,.TRA E,.TRA PA,.TXT G,.TRA E
.ADR N,.END N,.TXT,.END G,.TXT
;HALF WORDS
.ADR HWT,.DIS 51,.TRA HW1,.DIS 21,.TXT R,.TRA HW2,.TXT L,.ADR HW2,.TXT R,.TRA HW3
.ADR HW1,.DIS 21,.TXT L,.TRA HW4,.TXT R,.ADR HW4,.TXT L
.ADR HW3,.DIS 32,.TRA IMS,.TXT Z,.TRA IMS,.TXT O,.TRA IMS,.TRA EIMS
;TEST INSTRUCTIONS
.ADR ACBM,.DIS 31,.TRA AC1,.DIS 01,.TXT D,.TRA AC2,.TXT S,.TRA AC2
.ADR AC1,.DIS 01,.TXT R,.TRA AC2,.TXT L
.ADR AC2,.DIS 42,.TXT N,.TRA EAN,.TXT Z,.TRA EAN,.TXT C,.TRA EAN,.TXT O
.ADR EAN,.DIS 12,.END,.TXT,.TRA E,.TRA PA,.TRA N
;BOOLEAN
.ADR BOOLE,.DIS 24,.TRA ST,.ADR AN,.TXT AND,.TRA B2,.TRA AN,.TRA ST,.TRA AN,.TRA ST
.TXT X,.ADR OR,.TXT OR,.TRA B2,.TXT I,.TRA OR,.TRA AN,.TXT EQ
.TRA DV2,.TRA ST,.TRA OR,.TRA ST,.TRA OR,.TRA OR
.ADR ST,.TXT SET,.ADR B2,.DIS 24,.TXT Z,.TRA IMB,.TRA IMB
.ADR CA,.TXT C,.TRA TA,.ADR TM,.TXT M,.TRA IMB
.ADR CM,.TXT C,.TRA TM,.ADR TA,.TXT A,.TRA IMB,.TRA IMB,.TRA IMB
.ADR CB,.TXT C,.TRA BIMB,.TRA IMB,.TRA CA
.TRA CA,.TRA CM,.TRA CM,.TRA CB,.TXT O,.TRA IMB
;INSTRUCTION GROUP 120
.ADR I120,.DIS 11,.TRAX DMOV,.DIS 01,.TXT FIX,.TRAX FIX2,.DIS 21,.END EXTEND
.TXT FLT,.ADR FIX2,.DIS 21,.END,.TRA R
.ADR DMOV,.TXT DMOV,.DIS 01,.TXT E,.TRAX EM,.TXT N
.ADR EM,.DIS 21,.END,.TRA M
;MORE UUO'S
.ADR U50,.DIS 03,.TXT OPE,.TRA N,.TXT TT,.ADR CAL,.TXT CAL,.TRA L,.END,.END,.END
.TXT,.TXT RENAM,.TRA E,.TXT I,.TRA N,.TXT OU,.TRA T
.ADR U703,.DIS 02,.TXT CLOS,.TRA E,.TXT RELEA,.TRA S
.TXT MTAP,.TRA E,.TXT UGET,.TRA F
;INSTRUCTION GROUP 110 - DF ARITHMETIC
.ADR I110,.DIS 21,.TXT DF,.TRAX DF,.TXT D,.TRAX FXDP,.ADR DF,.DIS 02
.END AD,.END SB,.TXT M,.TRA P,.END DV
;KL10 FIXED POINT DOUBLE PRECISION OPERATIONS
.ADR FXDP,.DIS 02,.END ADD,.END SUB,.END MUL,.END DIV
;OPCODES 100 TO 107 COME HERE
.ADR I100,.DIS 21,.END,.DIS 02,.END JSYS,.END ADJSP,.END,.END
;**********THIS TERMINATES THE "BYT9" MACRO ARGUMENT******
>
IF1,< BLOCK <CLOC+3>/4>
IF2,< IFN BINC-^D36,<BYTE (9) BINR1,BINR2,BINR3,0> >
IFNDEF CLOC.,<CLOC.==CLOC>
IFN CLOC.-CLOC,<PRINTX PHASE ERROR IN OPTABLE>
.CREF ;TURN CREF BACK ON
BTAB: POINT 9,TBL ;TABLE USED TO GET NEXT BYTE POINTER
POINT 9,TBL,8 ;FOR TRANSFER BYTE
POINT 9,TBL,17
POINT 9,TBL,26
OPEVAL: MOVEI T,0 ;EVALUATE FOR AN OP CODE
IDPB T,CHP ;INSERT NULL IN TEXT FOR SYMBOL
MOVEM P,SAVPDL
TRZA F,OUTF
OPTYPE: TRO F,OUTF ;TYPE AN OPCODE SYMBOLICALLY
LSH T,-33
MOVEM T,INST ;GET OPCODE INTO RIGHT 9 BITS
MOVE T,[POINT 7,OPTXT]
MOVEM T,CHP ;FOR OPEVAL,SETUP POINTER TO INPUT TEXT
TRZ F,ITF ;CLEAR INSTRUCTION TYPED FLAG
CLEARB R,W1
MOVE W2,BTAB
DC1: ILDB T,W2 ;GET NEXT BYTE IN TBL
CAILE T,40
CAIL T,74
SOJGE R,DC1 ;SKIP OVER # BYTES = C(R)
JUMPG R,DC1 ;SKIP OVER ALPHA TEXT (AND EXTEND BYTES) WITHOUT COUNTING
SUBI T,40
JUMPE T,DECX ;TRANSFER ON ASTOP CODE
JUMPG T,DC2
DPB T,[XWD 340500,PNTR] ;SETUP R ON A DISPATCH BYTE
TRZ T,-4
AOS T
DPB T,[XWD 300600,PNTR]
TRNN F,OUTF
JRST DC6 ;FOR OPEVAL ONLY
LDB R,PNTR ;GET # BYTES TO SKIP OVER
JRST DC1
DC2: HRREI T,-33(T) ;TOTAL SUBTRACTED NOW IS 73
JUMPL T,DECT ;TYPE OUT A LETTER
JUMPG T,DC3 ;XFER IF BYTE .GE. 74
ILDB T,W2 ;BYTE IS EXTEND BYTE (73), GET NEXT
MOVEI T,1000-74*2+1(T) ; BYTE AND ADD IN EXTENSION (-OFFSET)
DC3: MOVEI W1,FIR.-1(T) ;BYTE IS AN XFER (1ST XFER IS 74)
IDIVI W1,4
MOVE W2,BTAB(W2) ;CALCULATE POINTER TO NEXT BYTE
ADDI W2,(W1)
JRST DC1
DECT: TRNE F,OUTF
JRST DC8 ;TYPE OUT A LETTER
ILDB W1,CHP ;GET NEXT INPUT LETTER
CAIE W1,133(T) ;COMPARE WITH ASSUMED NEXT LETTER
JRST NOMAT ;DOESNT MATCH
JRST DC1 ;MATCHES, TRY NEXT
DECX: TRNE F,OUTF ;STOP (CODE 40) HAS BEEN SEEN
POPJ P, ;IF FOR OUTPUT, RETURN
ILDB W1,CHP ;GET NEXT INPUT CHAR IF ANY
JUMPE W1,DC7 ;DOES # OF CHARS MATCH
NOMAT: POP P,R ;NO, BACK UP AND TRY SOME MORE
POP P,W2
POP P,PNTR
POP P,CHP
NOMAT1: AOS R ;ASSUME NEXT NUMBER FOR BIN VALUE
DPB R,PNTR ;STUFF INTO ANSWER
LDB R,PNTR
JUMPN R,DC6AA ;IF =0, BYTE WAS TOO BIG
CAME P,SAVPDL
JRST NOMAT ;NOT AT TOP LEVEL
POPJ P, ;UNDEFINED, FINALLY
DC6: MOVEI R,0 ;ASSUME 0 FOR INITIAL BINARY VALUE
DPB R,PNTR
DC6AA: CAMN P,SAVPDL
JRST DC6BB
LDB T,-2(P) ;OLD VALUE OF PNTR
CAME T,(P)
JRST NOMAT1
DC6BB: PUSH P,CHP
PUSH P,PNTR
PUSH P,W2
PUSH P,R
JRST DC1
DC7: MOVE P,SAVPDL ;RESTORE PUSH DOWN POINTER
MOVE T,INST
LSH T,33 ;PUSH BINARY INTO POSITION FOR OPEVAL
LDB R,[POINT 3,T,8]
TLC T,700000
TLCN T,700000
DPB R,[POINT 10,T,12] ;ONLY DONE FOR IO INSTRUCTIONS
JRST CPOPJ1 ;SYMBOL FOUND, SKIP RETURN
DC8: TRO F,ITF ;SET INSTRUCTION TYPED FLAG
MOVEI T,133(T)
PUSHJ P,TOUT ;OUTPUT A LETTER
CLEARM SPSAV ;SO $D WONT TRY TO DELETE OP CODES
JRST DC1
SUBTTL SYMBOL TABLE ROUTINES -- FIND PROGRAM NAME
;NAMSRH -- ROUTINE TO FIND THE PROGRAM NAME IN SYM IN THE SYMBOL TABLE
;CALL:
; <SET UP SYM>
; PUSHJ P,NAMSRH
; NOT FOUND
; OK RETURN
;
;RETURNS THE SYMBOL INDEX TO THE 2ND WORD OF THE PROGRAM NAME PAIR IN R.
;CAN GO TO ERR IF BAD SYMBOL TABLE FORMAT.
NAMSRH: PUSHJ P,SYMSET ;SET UP TO LOOP OVER THE SYMBOL TABLE
SUBI R,1 ;ACCOUNT FOR AOSGE BELOW
;BACK HERE TO LOOK AT THE NEXT MODULE NAME.
NAMSR2: AOSGE R ;ANY MORE SYMBOLS LEFT?
PUSHJ P,ADVSYM ;NO, GET MORE SYMBOLS IF ANY
SKIPA T,@SYPTR ;FOUND MORE SYMBOLS, GET VALUE WORD
POPJ P, ;NOT FOUND, RETURN
HLRE T,T ;NEGATIVE # WORDS IN THIS MODULE
SOSGE R ;BACK R UP TO NAME WORD
PUSHJ P,ADVSYM ;OFF END OF WINDOW?
SKIPA W2,@SYPTR ;GET NAME
JRST ERR ;VAL BUT NO NAME, BAD FORMAT!
TXNE W2,PNAME ;IS THIS A PROGRAM NAME?
JRST ERR ;NO, BAD FORMAT
CAMN W2,SYM ;MATCH?
JRST NAMSR8 ;YES, RETURN IT TO CALLER
JUMPE T,[SETO R, ;IF 0, WAS PAT.. BEFORE LINK BUG FIXED
SOJA R,NAMSR2] ;SO GOTO END OF SYMBOL TABLE AND TRY AGAIN
ADD R,T ;NO, REDUCE R BY APPROPRIATE AMOUNT
JRST NAMSR2 ;AND TRY AGAIN
;HERE WHEN WE HAVE FOUND THE PROGRAM NAME. CONVERT R TO SYMBOL IDX AND RETURN.
NAMSR8: ADD R,R2IDX ;CONVERT TO SYMBOL INDEX
ADDI R,1 ;POINT TO THE SECOND WORD
JRST CPOPJ1 ;RETURN
SUBTTL SYMBOL TABLE ROUTINES -- REMOVE AN UNDEFINED SYMBOL
;REMUN -- ROUTINE TO DELETE A SYMBOL FROM THE UNDEFINED SYMBOL TABLE.
;CALL:
; MOVE W1,<SYMBOL INDEX OF SYMBOL TO DELETE>
; PUSHJ P,REMUN
; ERROR
; NORMAL
;
;DESTROYS R, T, AND W1.
REMUN: MOVX R,1B1 ;GET 1ST WORD IN THE UNDEFINED TABLE
PUSHJ P,FETSYM ; . . .
POPJ P, ;PROPAGATE ERRORS
MOVE R,W1 ;OVERWRITE 1ST WORD OF SYMBOL TO DELETE
PUSHJ P,DEPSYM ; . . .
POPJ P, ;ERROR
MOVX R,1B1+1 ;NOW GET 2ND WORD OF TABLE
PUSHJ P,FETSYM ; . . .
POPJ P, ;ERROR
AOS R,W1 ;OVERWRITE 2ND WORD OF SYMBOL TO DELETE
PUSHJ P,DSYMER ; . . .
MOVX T,<2,,2> ;DECREMENT COUNT OF UNDEFINED SYMBOLS
ADDB T,@USYMP ; . . .
MOVEM T,ESTUT ;KEEP ESTUT UP TO DATE FOR DEPRA
JRST CPOPJ1 ;GIVE GOOD RETURN
SUBTTL SYMBOL TABLE ROUTINES -- SYMSET, USYSET, AND ADVSYM
;SYMSET -- ROUTINE TO SET UP TO SEARCH THE SYMBOL TABLE.
;CALL:
; PUSHJ P,SYMSET
; RETURN
;
;SETS UP R AND SYPTR TO FETCH LAST WORD OF TABLE. ALSO SETS UP
;INTERNAL VARIABLES SO ADVSYM WILL KNOW WHAT TO DO. HANDLES
;WINDOWING IF NEEDED.
SYMSET:
IFN FTEXEC,<
PUSHJ P,SYMSPC ;MAKE SURE SEARCHING DONE IN SYMBOL VAS
> ;END IFN FTEXEC
IFE FTFILE,<
PUSHJ P,SYMCHK ;MAKE SURE WE TRUST THE SYMBOL TABLE POINTERS
> ;END IFE FTFILE
IFN FTMON,<
SETZM CT2GO ;MAKE SURE IN CASE NO ST TO SEARCH
> ;END IFN FTMON
HLRE R,@SYMP ;GET NUMBER OF SYMBOLS IN LOWSEG TABLE
HLRE S,SAVHSM ;AND NUMBER IN HISEG TABLE
ADD R,S ;TOTAL NUMBER OF SYMBOL WORDS TO LOOK AT
MOVNM R,SY2GO ;SEARCH STOPS WHEN THIS WORD GOES TO ZERO
SKIPN SY2GO ;ANY SYMBOLS TO LOOK AT?
SOJA R,CPOPJ ;NO, RETURN -1 TO START
TXO F,HSYMF!PNAMEF ;SEARCH LOWSEG FIRST, ASSUME NO $: POINTER
TXZ F,USYMF ;NOT SEARCHING THE UNDEFINED TABLE
SKIPN R,PRGM ;IS THERE AN OPEN MODULE?
JRST NEWSYP ;NO, JUST SELECT THE NEXT TABLE TO LOOK AT
TXZ F,PNAMEF ;TELL CALLER HE IS LOOKING AT THE OPEN MODULE
TXZN R,1B0 ;IS OPEN MODULE IN THE HIGH SEG TABLE?
SKIPA S,@SYMP ;NO, FETCH LOWSEG TABLE POINTER
SKIPA S,SAVHSM ;YES, FETCH HISEG TABLE POINTER
TXZA F,HSYMF ;LOSEG: REMEMBER THAT FACT
TXO F,HSYMF ;HISEG: REMEMBER THAT FACT
JRST PTRSET ;GO SEARCH S'S TABLE STARTING AT OFFSET IN R
;USYSET -- ROUTINE TO SET UP TO SEARCH THE UNDEFINED TABLE.
;CALL:
; PUSHJ P,USYSET
; RETURN
;
;DOES EVERYTHING SYMSET DOES, EXCEPT FOR THE UNDEFINED SYMBOL TABLE.
USYSET:
IFN FTEXEC,<
PUSHJ P,SYMSPC ;MAKE SURE SEARCHING DONE IN SYMBOL VAS
> ;END IFN FTEXEC
IFE FTFILE,<
PUSHJ P,SYMCHK ;MAKE SURE WE TRUST THE SYMBOL TABLE POINTERS
> ;END IFE FTFILE
IFN FTMON,<
SETZM CT2GO ;MAKE SURE IN CASE ST EMPTY
> ;END IFN FTMON
MOVE S,ESTUT ;GET OUR UNDEFINED TABLE
HLRE R,S ;GET - COUNT OF WORDS IN IT
SETCAB R,SY2GO ;PUT +COUNT-1 INTO R AND SY2GO
AOSG SY2GO ;WANT FULL COUNT IN SY2GO
POPJ P, ;RETURN NOW IF NOTHING TO LOOK AT
TXO F,USYMF ;REMEMBER LOOKING AT THE UNDEFINED TABLE
TXZ F,HSYMF ;AND NOT AT THE HISEG TABLE
JRST PTRSET ;SET THIS POINTER UP FOR ADVSYM
;ADVSYM -- ROUTINE TO ADVANCE TO NEXT BLOCK OF SYMBOLS TO BE SEARCHED
;CALL:
; MOVEI R,-<COUNT OF WORDS TO BACK UP>
; PUSHJ P,ADVSYM
; MORE SYMBOLS TO LOOK AT, R UPDATED
; ALL DONE
;
;R WILL NORMALLY CONTAIN -1 ON THE CALL TO FETCH THE NEXT (PREVIOUS) WORD.
;IF R IS SMALLER THAN -1, THE CALLER WANTS TO SKIP BACKWARDS, AS WHEN
;SEARCHING FOR A MODULE NAME.
;
;MAY GET MORE SYMBOLS BY ADVANCING A SYMBOL WINDOW (IF WINDOWING), OR
;BY ADVANCING TO THE NEXT OF SEVERAL SYMBOL TABLES TO BE SEARCHED.
ADVSYM: AOJG R,ERR ;ERROR IF + OR 0, CONVERT TO COUNT
IFN FTMON,<
SKIPG CT2GO ;WINDOWING?
JRST ADVSY4 ;NO OR DONE. SEE IF ANOTHER TABLE.
ADDM R,CT2GO ;DECREMENT WORDS TO LOOK AT IN THIS TABLE
SKIPG CT2GO ;THIS TABLE FINISHED YET?
JRST ADVSY2 ;YES, SEE IF ANOTHER ONE
ADD R,R2IDX ;GET SYMBOL INDEX OF NEXT WORD TO LOOK AT
SOJA R,SYWADV ;ADJUST FOR AOJG AND GO MAP IT IN
ADVSY2: MOVE R,CT2GO ;CT2GO WENT - OR 0, ADJUST SY2GO INSTEAD
ADVSY4:
> ;END IFN FTMON
ADDM R,SY2GO ;DECREMENT SY2GO SINCE WE'RE SKIPPING SYMBOLS
SKIPG SY2GO ;ANY SYMBOLS LEFT TO LOOK AT?
JRST CPOPJ1 ;NO, GIVE ALL DONE RETURN
;FALL INTO NEWSYP
;FALL IN FROM ABOVE
;NEWSYP -- ROUTINE TO SELECT THE NEXT SYMBOL TABLE (& POINTER) TO SEARCH
;CALL:
; MOVX R,-<COUNT OF SYMBOLS TO SKIP>
; PUSHJ P,NEWSYP
; RETURN
;
;ON RETURN, A NEW SYMBOL TABLE HAS BEEN SELECTED, AND R AND SYPTR HAVE BEEN
;SETUP TO SEARCH IT. ALSO SETS UP VARIOUS INTERNAL CELLS SO THAT THE NEXT
;CALL TO ADVSYM WILL KNOW WHAT TO DO.
NEWSYP: TXNN F,HSYMF ;WHICH TABLE DID WE SEARCH LAST?
SKIPL SAVHSM ;LOWSEG -- IS THERE A HISEG TABLE TO SEARCH?
SKIPL S,@SYMP ;HISEG LAST OR NO HISEG TABLE, HOW ABOUT LOWSEG?
SKIPA S,SAVHSM ;HISEG'S TURN OR NO LOWSEG TABLE, GET .JBHSM
TXZA F,HSYMF ;GOING TO SEARCH LOWSEG TABLE: REMEMBER IT
TXO F,HSYMF ;GOING TO SEARCH HISEG TABLE: REMEMBER IT
HLRE TT1,S ;WANT TO COMPUTE OFFSET TO LAST WORD IN TABLE
SUB R,TT1 ;GET COUNT TO WORD TO LOOK AT
JUMPLE R,NEWSYP ;LOOP IF WE SHOULD SKIP THIS ENTIRE TABLE
SOJA R,PTRSET ;FORM OFFSET TO LAST WORD, AND GO SETUP
;PTRSET -- ROUTINE TO SETUP TO SEARCH A NEW SYMBOL TABLE
;CALL:
; MOVE S,<POINTER TO TABLE TO SEARCH>
; MOVE R,<OFFSET FROM START OF TABLE OF WORD TO LOOK AT FIRST>
; PUSHJ P,PTRSET
; RETURN
;
;ON RETURN, R AND SYPTR ARE SET UP, THE SYMBOL WINDOW HAS BEEN SET
;IF NEEDED, AND THE VARIABLES THAT ADVSYM LOOKS AT HAVE BEEN SET UP.
PTRSET:
IFN FTMON,<
SKIPN HSBLK ;ANY SYMBOL WINDOWING GOING ON?
JRST PTRSE2 ;NO, DON'T SET UP CT2GO
MOVEM R,CT2GO ;ASSUME WILL LOOK AT ENTIRE TABLE
AOS CT2GO ;R IS AN OFFSET, NOT A COUNT
SKIPA TT1,SYWIN ;INTERNAL FETCHES ARE FROM THE WINDOW
PTRSE2:
> ;END IFN FTMON
HRRZ TT1,S ;IF NOT WINDOWING, POINT AT TABLE ITSELF
IFE FTMON,<
HLL TT1,SECDDT ;IN DDT'S SECTION
> ;END IFE FTMON
SKPNS0 ;IN SECTION 0?
TXOA TT1,<Z (R)> ;NO, CONVERT TO SYPTR WITH IFIW INDEX
TXO TT1,<BYTE(2)0(4)R> ;YES, USE EFIW INDEX FOR SYPTR
MOVEM TT1,SYPTR ;STORE FOR CALLERS
MOVN TT1,R ;DECREMENT SY2GO BY NUMBER OF SYMBOLS
ADDM TT1,SY2GO ; THAT WE PLAN TO LOOK AT
SOS TT1,SY2GO ;R IS AN OFFSET, NOT A COUNT
;FALL THROUGH TO NEXT PAGE
;FALL IN FROM ABOVE
IFN FTMON,<
SKIPN HSBLK ;WINDOWING?
JRST PTRSE6 ;NO, TREAT LIKE NOT MDDT
SKIPGE TT1 ;DID WE OVERFLOW SY2GO?
ADDM TT1,CT2GO ;YES, THERE ARE FEWER WORDS IN CURRENT TABLE TOO
TXNE F,HSYMF ;CONVERT R INTO A SYMBOL INDEX
TXO R,1B0 ; BY BRUTE FORCE
TXNE F,USYMF ; . . .
TXO R,1B1 ; . . .
PJRST SYWADV ;GO SETUP R2IDX, MAP IN A WINDOW, ETC.
PTRSE6:
> ;END IFN FTMON
TXNN F,HSYMF ;LOOKING AT HISEG TABLE?
TDZA TT2,TT2 ;NO, R2IDX IS ZERO
MOVX TT2,1B0 ;YES, R2IDX IS 1B0
TXNE F,USYMF ;REALLY UNDEFINED TABLE?
MOVX TT2,1B1 ;YES, R2IDX IS 1B1 INSTEAD
MOVEM TT2,R2IDX ;SET UP FOR CALLERS
JUMPGE TT1,CPOPJ ;DONE IF DIDN'T OVERFLOW SY2GO
ADD R,TT1 ;IF WE DID, THERE ARE FEW WORDS TO FETCH
MOVN TT1,TT1 ;NEED TO BUMP SYPTR
ADDM TT1,SYPTR ;SO FIXING R WON'T CHANGE WHICH WORDS WE GET
ADDM TT1,R2IDX ;ADJUST SO SYMBOL INDEX WON'T CHANGE
POPJ P, ;ALL DONE
IFN FTMON,<
;SYWADV -- ROUTINE TO ADVANCE TO A NEW WINDOW AND MAP IN THE SYMBOLS
;CALL:
; MOVEI R,<SYMBOL INDEX OF LAST WORD TO MAP IN>
; <PUT # WORDS TO LOOK AT IN CT2GO>
; PUSHJ P,SYWADV
; RETURN
;
;ON RETURN, R IS SET UP TO BE USED BY CALLERS OF SYMSET (AS @SYPTR), AND
;R2IDX CONTAINS THE NUMBER TO ADD TO R TO FORM A SYMBOL INDEX.
;
;CT2GO HAS ALSO BEEN DECREMENTED, AND THE SYMBOLS HAVE BEEN MAPPED IN.
SYWADV: SETZ TT, ;INDICATE READ ONLY TO SYWSET
PUSHJ P,SYWSET ;MAP SYMBOL INDEX IN R INTO THE WINDOW
MOVE S,R ;SAVE A PERMANANT COPY
ANDX R,77B5 ;POINT TO THE 0'TH WORD IN THIS TABLE
PUSHJ P,R2ADDR ;FIND BASE OF TABLE
MOVE TT1,R ;SCRATCH COPY
ANDCMI TT1,SYWMSK ;BASE OF TABLE ROUNDED DOWN TO WINDOW BOUND
SUBB R,TT1 ;PUT # WORDS OFF OF ALIGNMENT IN BOTH ACS
ADDB R,S ;SYMBOL INDEX IF TABLE HAD BEEN ALIGNED
ANDI R,SYWMSK ;OFFSET FROM SYPTR IN LAST WINDOW
ANDCMI S,SYWMSK ;SAVE REST OF WINDOWS FOR NEXT TIME
SUB S,TT1 ;REMEMBER TABLE WASN'T REALLY ALIGNED
MOVEM S,R2IDX ;SAVE FOR COMPUTATION OF SYMBOL INDEX
MOVN TT1,R ;NOW TO DECREMENT CT2GO
ADDM TT1,CT2GO ;DOWN IT GOES
SOS TT1,CT2GO ;R IS AN OFFSET, NOT A COUNT
JUMPGE TT1,CPOPJ ;DONE IF CT2GO DIDN'T OVERFLOW
ADD R,TT1 ;IT DID, SO LOOK AT LESS SYMBOLS
MOVN TT1,TT1 ;NEED TO INCREMENT SYPTR
ADDM TT1,SYPTR ;SO DECREMENTING R WON'T CHANGE WORDS FETCHED
ADDM TT1,R2IDX ;ANOTHER FUDGE FOR ADJUSTING R
POPJ P, ;DONE
> ;END IFN FTMON
SUBTTL MEMORY MANAGEMENT ROUTINES -- FETCH
;FETCH FROM MEMORY SUBROUTINE
;HFETCH GETS A WORD FROM THE HISEG GIVEN AN OFFSET INTO THE SEGMENT
;CALL WITH:
; R = HISEG OFFSET
; PUSHJ P,HFETCH
; NO HISEG RETURN
; HERE WITH WORD IN T
;
HFETCH:
IFN FTEXEC,<
SKPUSR ;NO HISEG SYMBOLS IN EXEC MODE
POPJ P,0> ; . . .
PUSHJ P,GETHSO ;GET START OF HISEG
JUMPE T,CPOPJ ;EXIT IF NONE
ADD R,T ;RELOCATE
PJRST FETCH ;NOW JUST USE FETCH
;FETCH -- GENERAL FETCH FROM MEMORY ROUTINE
;FETSYM -- FETCH FROM SYMBOL VIRTUAL ADDRESS SPACE
;FETCHL -- VIRTUAL FETCH FROM CURRENT "LOCAL" SECTION
;FETCHP -- FETCH FROM PHYSICAL ADDRESS (NO MAPPING, ETC.)
;FETCHV -- FETCH FROM USER VIRTUAL ADDRESSING SPACE
;CALL IS:
;
; MOVX R,<ADR>
; PUSHJ P,FETCH
; ERROR
; NORMAL RETURN
;
;WHERE <ADR> IS THE ADDRESS IN THE "USER" ADDRESS SPACE WHOSE CON-
;TENTS ARE DESIRED.
;
;THE ERROR RETURN IS TAKEN IF THE ADDRESSED WORD IS INACCESSIBLE
;FOR SOME REASON. THE ERROR RETURN IS ALSO TAKEN IF THE PAGE DOES
;NOT EXIST, SINCE THE "?" PRINTED GIVES MORE INFO THAN THE 0 THAT
;WOULD BE PRINTED IF WE TOUCHED A NON-EXISTENT PAGE AND CREATED IT.
;IT ALSO DISTURBS OUR ENVIRONMENT LESS.
;
;THE NORMAL RETURN IS TAKEN WITH THE CONTENTS OF <ADR> IN AC T.
;
;R IS PRESERVED, TT1 AND TT2 DESTROYED.
IFE FTFILE,<
FETSYM: PUSHJ P,SAVR ;SAVE R FOR CALLER
IFN FTMON,<
SKIPN HSBLK ;WINDOWING?
JRST FETSY2 ;NO, DON'T DO ANY OF THIS
SETZ TT, ;INDICATE READ ONLY
PUSHJ P,SYWSET ;PUT SYMBOL INTO OUR WINDOW
PUSHJ P,R2ADDR ;CONVERT R TO AN ADDRESS
ANDI R,SYWMSK ;GET OFFSET FROM BEGINNING OF WINDOW
IOR R,SYWIN ;POINT INTO SYMBOL WINDOW AREA
JRST FETCHS ;GO DO THE FETCH
FETSY2:
> ;END IFN FTMON
IFN FTEXEC,<
PUSHJ P,SYMSPC ;PUT OURSELF IN THE SYMBOL SPACE
> ;END IFN FTEXEC
PUSHJ P,R2ADDR ;CONVERT R TO ADDRESS TO USE
JRST FETCHS ;JOIN COMMON CODE BELOW
> ;END OF IFE FTFILE
;HERE FOR A GENERAL USER FETCH, AS IN RESPONSE TO <LOCATION>/
FETCH: CAIL R,0 ;ADDRESS MUST BE .GE. 0
CAMLE R,UPROT ;AND .LE. PROTECTION ADDRESS
POPJ P, ;NO, FAIL IMMEDIATELY
PUSHJ P,SAVR ;PRESERVE VIRTUAL ADDRESS FOR CALLER
ADD R,UBASE ;RELOCATE PER USER REQUEST
JSP TT1,FETFAC ;POSSIBLY FETCH FROM FAKE AC
PUSHJ P,MAPADR ;DO ANY MAPPING NECESSARY
POPJ P, ;ACCESS FAILURE
SKIPN MAPFN ;PHYSICAL OR VIRTUAL FETCHING NEEDED?
JRST FETCH6 ;ORDINARY VIRTUAL FETCH
JRST FETCH3 ;PHYSICAL FETCH
;FIRST, USER AND EXEC DDT STYLE HANDLING
IFE FTFILE,<
;HERE TO FETCH A WORD FROM "PHYSICAL" MEMORY SPACE
IFN FTEXEC,< ;ONLY VALID IN EXEC DDT
FETCHP: PUSHJ P,SAVR ;PRESERVE R AS ADVERTISED
FETCH3: SKPUSR ;IN EXEC MODE AT MOMENT?
PUSHJ P,OKPAG ;AND PAGING ON?
JRST FETCH5 ;NO, THEN ORDINARY VIRTUAL FETCH
MOVSI TT2,(<MOVE T,@0>) ;FETCH FROM MEMORY OPERATION
PJRST PHYIN ;DO INSTRUCTION IN PHYSICAL MEM SPACE
> ;END OF IFN FTEXEC
;HERE TO DO A VIRTUAL FETCH FROM CURRENT LOCAL SECTION
FETCHL: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
HLL R,SECDDT ;GET DDT'S (SYMBOL'S) LOCAL SECTION ADDRESS
JRST FETCH5 ;CONTINUE IN VIRTUAL FETCH
;HERE TO DO A VIRTUAL FETCH FROM "USER" ADDRESS SPACE
FETCHV: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
FETCH5: JSP TT1,FETFAC ;SEE IF FAKE AC REFERENCE
FETCH6:
IFN FTEXEC,<
PUSHJ P,NORSPC ;MAKE SURE IN NORMAL ADDRESS SPACE
> ;END IFN FTEXEC
FETCHS: PUSHJ P,CHKADR ;SEE IF ACCESSIBLE ADDRESS
TXNE TT,PG$EXI ;DOES PAGE EXIST?
TXNN TT,PG$REA ;AND CAN WE READ IT?
POPJ P, ;NO TO ONE OF THE ABOVE
JSP TT2,PCAFI ;SUPPRESS ADDRESS BREAK AND
MOVE T,@R ;FETCH DESIRED VIRTUAL WORD
IFN FTDEC20,<ERJMP CPOPJ> ;RETURN FAILURE IF THIS JUST ISN'T OUR DAY
JRST CPOPJ1 ;RETURN SUCCESSFULLY
> ;END OF IFE FTFILE
;NOW FILDDT'S HANDLING
IFN FTFILE,<
;FETCH FROM LOCAL SECTION
FETCHL: PUSHJ P,SAVR ;PRESERVE R
HLL R,SECDDT ;DDT'S (SYMBOL'S) LOCAL SECTION ADDRESS
JRST FETCH5 ;CONTINUE IN VIRTUAL FETCH
;"VIRTUAL" FETCH
FETCHV: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
FETCH5: JSP TT1,FETFAC ;CHECK REGISTER REFERENCE
FETCH6: SKIPN FILING ;LOOKING AT FILE?
JRST MONPEK ;NO, RUNNING MONITOR/MEMORY
PUSHJ P,CHKADR ;SEE IF WORD ACCESSIBLE
TXNE TT,PG$EXI ;DOES WORD EXIST?
TXNN TT,PG$REA ;AND CAN IT BE READ?
POPJ P, ;NO TO ONE OF ABOVE
SETZ T, ;IN CASE ABZ
TXNE TT,PG$ABZ ;ALLOCATED BUT ZERO?
JRST CPOPJ1 ;YES, RETURN A 0 WORD
;ACCESSIBLE ADDRESS, SEE IF ALREADY IN MEMORY
PUSHJ P,SRHWIN ;LOOK FOR PAGE ALREADY IN MEMORY
CAIA ;NOT THERE, READ IT IN
JRST FETCH7 ;FOUND IT
;NOT THERE, READ IN SELECTED FILE PAGE NUMBER
PUSHJ P,FREWIN ;FREE UP A WINDOW TO READ INTO
PUSHJ P,REDWIN ;READ INTO MEMORY WINDOW
POPJ P, ;I/O ERROR OR SOMETHING
FETCH7: MOVEI T,PAGMSK ;MASK TO
AND T,R ;GET WORD INDEX INTO PAGE
LSH TT2,PG2WRD ;WORD ADDRESS OF BASE OF WINDOW
ADD T,TT2 ;WORD ADDRESS OF DESIRED WORD
ADD T,WIND0 ;RELOCATE INTO FILDDT MEMORY
MOVE T,(T) ;GET THE DESIRED WORD
IFN FTDEC20,<ERJMP CPOPJ> ;CAN'T GET THE DATA
JRST CPOPJ1 ;RETURN HAPPILY
;STILL FTFILE
IFN FTDEC10,<
MONPEK: SKIPE JOBING ;JOBPEK'ING?
JRST JOBPEC ;YES
PUSHJ P,CHKADR ;VERIFY ADDRESS
TXNE TT,PG$EXI ;DOES PAGE EXIST?
TXNN TT,PG$REA ;AND CAN WE READ IT?
POPJ P, ;NO TO ONE OF ABOVE
MOVE T,R ;ADDRESS DESIRED IN T
SKIPE MAPFN ;PHYSICAL OR VIRTUAL "PEEK"
JRST PHYPEK ;PHYSICAL
PEEK T, ;VIRTUAL, PEEK AT RUNNING MONITOR
JRST CPOPJ1 ;ASSUME SUCCESS (?)
PHYPEK: CAML T,MAXSIZ ;IS ADDRESS IN PHYSICAL MEMORY?
POPJ P, ;NO, GIVE AN ERROR
PEEK T,UU.PHY ;EXAMINE PHYSICAL MEMORY SPACE
JRST CPOPJ1 ;ASSUME SUCCESS . . .
JOBPEC: MOVEI TT,TT1 ;ADDRESS OF ARGUMENT LIST
HRLZ TT1,JOBING ;JOB NUMBER WHOSE MEMORY IS TO BE READ
HRRI TT1,1 ;ONLY READ ONE WORD
HRLZ TT2,R ;ADDRESS TO BE READ
HRRI TT2,T ;ADDRESS TO PUT IT IN (OURS)
TLNN R,-1 ;BY THE WAY, ADDRESS WITHIN REASON?
JOBPEK TT, ;ASK MONITOR FOR OTHER JOB'S MEMORY
POPJ P, ;ERROR
JRST CPOPJ1 ;SUCCESS!! HOW ABOUT THAT!
> ;END OF IFN FTDEC10
IFN FTDEC20,<
MONPEK: SKIPE MAPFN ;NEED TO PEEK AT PHYSICAL MEMORY?
POPJ P, ;YES, TOPS-20 PROVIDES NO WAY TO DO IT
TLNE R,-1 ;NEED TO PEEK AT OTHER SECTIONS?
POPJ P, ;YES (SIGH), PEEK JSYS IS 18 BITS
PUSHJ P,SAVT4 ;SAVE JSYS ACS
HRRZ T1,R ;GET ADDRS
HRLI T1,1
MOVEI T2,T ;RETURN IN T
PEEK
POPJ P, ;FAILED
JRST CPOPJ1 ;OK
> ;END OF IFN FTDEC20
;STILL FTFILE
;SYMBOL FETCHING FOR FILDDT
FETSYM: PUSHJ P,SAVR ;PRESERVE FOR CALLERS
PUSHJ P,R2ADDR ;CONVERT TO AN ADDRESS
CAML R,FISBEG ;BELOW BEGINNING OF SYMS?
CAMLE R,FISEND ;OR BEYOND END?
POPJ P, ;YES, GIVE ERROR ERTURN
MOVE T,(R) ;FETCH VALUE
JRST CPOPJ1 ;RETURN
> ;END OF IFN FTFILE
;PHYSICAL AND VIRTUAL FETCHES ARE IDENTICAL IN UDDT AND FILDDT.
;AC PROCESSING MAY DIFFER, BUT THAT IS CONTROLLED BY THE FAKEAC FLAG.
;FOR FILDDT, PHYSICAL ONLY PEEK IS HANDLED BY MONPEK IN EITHER CASE.
IFE FTEXEC,<
FETCHP==FETCHV ;NON-EDDT PHYSICAL FETCH
FETCH3==FETCH6 ; DITTO
> ;END OF IFE FTEXEC
SUBTTL MEMORY MANAGEMENT ROUTINES -- DEPOSIT
DEPRS: MOVEM T,LWT ;DEPOSIT REGISTER AND SAVE AS LWT
MOVE R,LLOCO ;QUAN TYPED IN REGIS EXAM
TXZE F,ROF
TXNN F,QF
POPJ P,0
;FALL INTO DMEMER
;DMEMER -- DEPOSIT INTO MEMORY, GO TO ERR IF FAILURE
DMEMER: PUSHJ P,DEPMEM ;TRY TO DEPOSIT INTO MEMORY
JRST ERR ;CAN'T, GO DIE
POPJ P, ;SUCCESS, JUST RETURN
;DSYMER -- DEPOSIT INTO SYMBOL TABLE, GO TO ERR IF FAILURE
DSYMER: PUSHJ P,DEPSYM ;TRY TO DEPOSIT INTO SYMBOL TABLE
JRST ERR ;CAN'T, GO DIE
POPJ P, ;JUST RETURN
;DEPMEM -- DEPOSIT INTO MEMORY
;DEPSYM -- DEPOSIT INTO SYMBOL TABLE (E.G., FILDDT)
;STOREL -- STORE INTO LOCAL SECTION
;STOREP -- STORE INTO PHYSICAL ADDRESS
;STOREV -- STORE INTO VIRTUAL ADDRESS
;CALL IS:
;
; MOVX R,<ADR> (SYMBOL INDEX IF DEPSYM)
; MOVX T,<WORD>
; PUSHJ P,DEPMEM/DEPSYM/STORE?
; ERROR
; NORMAL RETURN
;
;WHERE <WORD> IS THE 36-BIT QUANTITY TO BE DEPOSITED INTO THE
;ADDRESS REFERENCED BY <ADDR> (AS APPROPRIATE TO ROUTINE CALLED)
;
;THE ERROR RETURN IS TAKEN IF THE DESIRED ADDRESS CANNOT BE
;WRITTEN INTO.
;
;THE NORMAL RETURN IS TAKEN WITH THE CONTENTS OF AC "T" WRITTEN INTO
;THE ADDRESS CONTAINED IN R.
;
;USES TT, TT1, TT2
IFE FTFILE,<
DEPSYM: PUSHJ P,SAVR ;SAVE R FOR CALLER
IFN FTMON,<
SKIPN HSBLK ;WINDOWING?
JRST DEPSY2 ;NO, DON'T DO ANY OF THIS
MOVX TT,1B0 ;TELL SYWSET WE WANT TO WRITE
PUSHJ P,SYWSET ;SET UP WINDOW TO INCLUDE R
PUSHJ P,R2ADDR ;CONVERT R TO AN ADDRESS
ANDI R,SYWMSK ;GET OFFSET FROM BEGINNING OF WINDOW
IOR R,SYWIN ;POINT INTO SYMBOL WINDOW AREA
JRST STORES ;GO DO THE DEPOSIT
DEPSY2:
> ;END IFN FTMON
IFN FTEXEC,<
PUSHJ P,SYMSPC ;PUT OURSELF IN THE SYMBOL SPACE
> ;END IFN FTEXEC
PUSHJ P,R2ADDR ;CONVERT R TO ADDRESS TO USE
JRST STORES ;JOIN COMMON CODE BELOW
> ;END OF IFE FTFILE
;HERE FOR THE GENERAL DEPOSIT INTO MEMORY FUNCTION.
DEPMEM: CAIL R,0 ;ADR MUST BE .GE. 0
CAMLE R,UPROT ;AND .LE. PROTECTION ADDRESS
POPJ P, ;NOPE, USER LOSES
PUSHJ P,SAVR ;PRESERVE USER R FOR CALLER
ADD R,UBASE ;RELOCATE PER USER REQUEST
JSP TT1,STOFAC ;CHECK POSSIBLE AC REFERENCE
IFN FTFILE,< ;FOR FILDDT
SKIPN PATCHS ;MUST SPECIFICALLY ENABLE FOR DEPOSITS
JRST DEPNPT > ;WASN'T, ERROR
PUSHJ P,MAPADR ;DO ANY PAGE MAPPING NEEDED
POPJ P, ;ACCESS FAILURE
SKIPN MAPFN ;DO PHYSICAL OR VIRTUAL STORE?
JRST STORE6 ;ORDINARY VIRTUAL STORE
JRST STORE3 ;PHYSICAL STORE
;FIRST, USER AND EXEC DDT STYLE
IFE FTFILE,<
;HERE TO STORE A WORD INTO A "PHYSICAL ADDRESS"
IFN FTEXEC,<
STOREP: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
STORE3: SKPUSR ;CURRENTLY IN EXEC MODE?
PUSHJ P,OKPAG ;AND PAGING ON?
JRST STORE5 ;NO, DO REGULAR VIRTUAL STORE
MOVSI TT2,(<MOVEM T,@0>) ;DEPOSIT INTO MEMORY OPERATION
PUSHJ P,PHYIN ;DO IT IN PHYSICAL MEMORY
SOS 0(P) ;PROPAGATE ERROR RETURN
SETZM SYMVAL ;MIGHT CRUNCH A POINTER; DON'T TRUST SYMBOLS
SETZM PAGVAL ;MIGHT GET AN EPT; INVALIDATE PAGING INFO
SETZM PAGVAS ;INVALIDATE ALTERNATE PAGING INFO
JRST CPOPJ1 ;GIVE GOOD RETURN
> ;END OF IFN FTEXEC
;HERE TO STORE INTO LOCAL SECTION
STOREL: PUSHJ P,SAVR ;PRESERVE R FOR CALLER
HLL R,SECDDT ;RELOCATE INTO DDT'S (SYMBOL'S) LOCAL SECTION
JRST STORE5 ;CONTINUE IN VIRTUAL FETCH
;HERE TO DO REGULAR VIRTUAL STORE
STOREV: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
STORE5: JSP TT1,STOFAC ;CHECK FOR AC REFERENCE
STORE6: SETZM SYMVAL ;WE NO LONGER TRUST .JBSYM ETC
IFN FTEXEC,<
SKPEXC ;IN EXEC MODE?
JRST STORES ;NO, CONTINUE
SETZM PAGVAL ;YES, INVALIDATE PAGING PTRS
SETZM PAGVAS ;AND ALTERNATE PAGING POINTERS
PUSHJ P,NORSPC ;MAKE SURE IN NORMAL ADDRESS SPACE
> ;END OF IFN FTEXEC
STORES: PUSHJ P,CHKADR ;SEE ABOUT DESTINATION ADDRESS
TXNN TT,PG$EXI ;DOES PAGE EXIST?
JRST STORE8 ;NO - SEE IF USER WANTS TO CREATE IT
TXNE TT,PG$WRT ;IS PAGE WRITEABLE (I.E., MOVEM-ABLE)?
JRST STORE9 ;YES, GO DO MOVEM
SKIPN PATCHS ;YES - SHOULD WE TRY TO WRITE-ENABLE?
POPJ P, ;NO, ERROR RETURN
;FALL INTO NEXT PAGE
;FALL IN FROM PREVIOUS PAGE
IFN FTEXEC,<
SKPUSR ;IF EXEC MODE
JRST STORE7 ;THEN DIFFERENT HANDLING
> ;END IFN FTEXEC
IFN FTDEC10,< ;TOPS-10 WRITE ENABLE CODE
TXNN TT,PG$HGH ;A HIGH SEGMENT STORE?
POPJ P, ;NO, THEN DEFINITELY A LOSER
SETZ TT1, ;YES, CLEAR HISEG WRITE PROTECT
SETUWP TT1, ;TELL (ASK) MONITOR
POPJ P, ;USER LOSES
PUSH P,TT1 ;SAVE WRITE BIT
JSP TT2,PCAFI ;SUPPRESS ADDRESS BREAK AND
MOVEM T,@R ;DO THE STORE
POP P,TT1 ;RESTORE WRITE BIT
TRNE TT1,1 ;WAS HISEG WRITE-PROTECTED?
SETUWP TT1, ;YES, RE-WRITE-PROTECT IT AGAIN
JRST CPOPJ1 ;SUCCESSFUL RETURN
JRST CPOPJ1 ;SUCCESSFUL RETURN
> ;END OF IFN FTDEC10
;FALL IN FROM ABOVE
IFN FTDEC20&<^-FTMON>,< ;WRITE-ENABLE CODE FOR TOPS-20
MOVE TT1,R ;SAVE R
MOVE T1,R ;GET R FOR SPACS% JSYS
LSH T1,WRD2PG ;CONVERT TO PAGE NUMBER
HRLI T1,.FHSLF ;SET ACCESS FOR THIS FORK
ANDX TT,PA%RD!PA%WT!PA%EX!PA%CPY ;ONLY LEAVE BITS SPACS% USES
MOVE T2,TT ;GET RPACS% BITS FROM CHKADR
TXO T2,PA%CPY ;SET COPY-ON-WRITE
SPACS% ;CHANGE PAGE PROPERTIES
ERJMP CPOPJ ;ERROR IF FAILS
MOVE R,TT1 ;RESTORE R
JSP TT2,PCAFI ;SUPPRESS ADDRESS BREAK AND
MOVEM T,@R ;DO THE STORE
ERJMP [SOS (P) ;FORCE ERROR RETURN IF FAILS
JRST .+1] ;CONTINUE TO RE-WRITE LOCK
SETOM LASTPG ;STORE COULD HAVE CHANGED PROPERTIES
MOVE T2,TT ;RESTORE BITS AS CHKADR RETURNED THEM
SPACS% ;RESTORE PAGE ACCESS
ERJMP CPOPJ1 ;WE ALREADY CHANGED IT
JRST CPOPJ1 ;GIVE GOOD RETURN
> ;END IFN FTDEC20&<^-FTMON>
IFN FTMON,< ;MDDT'S WRITE ENABLE CODE
MOVE TT1,R ;PRESERVE R OVER SWPMWE
PUSHJ P,SAVT4 ;PRESERVE JSYS ACS
PUSHJ P,SWPMWE## ;WRITE-ENABLE SWAPPABLE MONITOR
SETOM LASTPG ;ACCESS INFO NO LONGER VALID
MOVE R,TT1 ;RESTORE R
PUSHJ P,CHKADR ;SEE IF THAT HELPED
TXNN TT,PG$WRT ;PAGE NOW WRITEABLE?
PJRST SWPMWP## ;NO, GIVE UP
JSP TT2,PCAFI ;YES, SUPPRESS ADDRESS BREAK AND
MOVEM T,@R ;DO THE STORE
ERJMP [SOS (P) ;IF FAILS, FORCE ERROR RETURN
JRST .+1] ;BUT CONTINUE TO RE-WRITE PROTECT
SETOM LASTPG ;STORE COULD HAVE CHANGED PROPERTIES
PUSHJ P,SWPMWP## ;RE-WRITE PROTECT THE MONITOR
JRST CPOPJ1 ;RETURN SUCCESS TO CALLER
> ;END IFN FTMON
;HERE TO WRITE-ENABLE AND DO THE WRITE ANYWAY
IFN FTEXEC,<
STORE7: SKPKI ;KA WILL NEVER GET HERE
JRST STOR7L ;NOT A KI EITHER
MAP TT1,(R) ;GET PHYSICAL PAGE NUMBER
LSH TT1,PG2WRD ;MAKE INTO WORD ADDRESS
ANDI R,PAGMSK ;WORD WITH PAGE ADDRESS
IOR R,TT1 ;PHYSICAL WORD ADDRESS + BITS
JRST STOR7M ;COMMON CODE
STOR7L: SKPKLS ;KL-10 OR KS-10?
HALT ERR ;NO?????
MAP R,(R) ;GET PHYSICAL WORD ADDRESS
STOR7M: TLZ R,777760 ;ONLY 22-BITS OF MEMORY BUS ADDRESS
JRST STORE3 ;TREAT AS PHYSICAL REFERENCE
> ;END IFN FTEXEC
;HERE TO TRY TO CREATE THE PAGE THAT DOESN'T EXIST
STORE8: IFN FTEXEC,<SKPEXC> ;NEVER NEVER TRY THIS IN EXEC MODE
SKIPN PATCHC ;AUTO-PAGE-CREATE ON?
POPJ P, ;NO, DON'T CREATE PAGE, JUST RETURN
IFN FTDEC10,< ;CREATE PAGE FOR TOPS-10
MOVE TT,[.PAGCD,,TT1];PAGE CREATE FUNCTION FOR PAGE.
MOVEI TT1,1 ;ONLY 1 ARGUMENT
MOVE TT2,R ;WORD ADDRESS
LSH TT2,WRD2PG ;DESIRED PAGE NUMBER
SETOM LASTPG ;FORGET ANY REMEMBERED ACCESS BITS
PAGE. TT, ;ASK MONITOR TO CREATE NEW PAGE FOR US
POPJ P, ;NO CAN DO
> ;END OF IFN FTDEC10
IFN FTDEC20,<
TXNN TT,PG$WRT ;WRITEABLE?
POPJ P, ;NO, DON'T TRY TO CREATE THE PAGE
> ;END IFN FTDEC20
STORE9: JSP TT2,PCAFI ;SUPPRESS ADDRESS BREAK AND
MOVEM T,@R ;DO THE STORE
IFN FTDEC20,<
ERJMP CPOPJ ;FAIL IF DOESN'T WORK FOR SOME REASON
SETOM LASTPG ;STORE COULD HAVE CHANGED PROPERTIES
> ;END OF IFN FTDEC20
JRST CPOPJ1 ;SUCCESSFUL RETURN
> ;END OF IFE FTFILE
;NOW FILDDT'S HANDLING
IFN FTFILE,<
;STORE INTO LOCAL SECTION
STOREL: PUSHJ P,SAVR ;PRESERVE R
HLL R,SECDDT ;DDT'S (SYMBOL'S) LOCAL SECTION
JRST STORE5 ;CONTINUE IN VIRTUAL STORE
;REGULAR USER VIRTUAL STORE
STOREV: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
STORE5: JSP TT1,STOFAC ;CHECK AC REFERENCE
SKIPN PATCHS ;PATCHING LEGAL?
JRST DEPNPT ;NO, GIVE AN ERROR
STORE6: SKIPN FILING ;FILE I/O OR RUNNING MONITOR/MEMORY?
JRST MONPOK ;RUNNING MONITOR/MEMORY
PUSHJ P,CHKADR ;CHECK ADDRESS ACCESSIBLE
TXNN TT,PG$ABZ ;CAN NEVER WRITE ABZ PAGES
TXNN TT,PG$WRT ;CAN WE WRITE THE PAGE?
POPJ P, ;NO
TXNE TT,PG$EXI ;DOES THE PAGE EXIST?
JRST STORF8 ;YES, GO READ IT IN
PUSH P,R ;SAVE ORIGINAL R
TRZN R,PAGMSK ;ROUND DOWN TO START OF PAGE
JRST STORF3 ;ALREADY THERE, DON'T BOTHER
PUSHJ P,CHKADR ;SEE IF THIS PAGE EXISTS AT ALL
TXNN TT,PG$WRT ;START OF PAGE WRITEABLE?
JRST [POP P,R ;NO?? RETURN ERROR
POPJ P,] ; . . .
STORF3: PUSH P,T ;SAVE WORD TO DEPOSIT
TXNE TT,PG$EXI ;DOES START OF PAGE EXIST?
JRST STORF4 ;YES, GO READ IT IN
;FALL THROUGH TO NEXT PAGE
;STILL FTFILE, FALL IN FROM ABOVE
;HERE WHEN THE PAGE WE'RE DEPOSITING INTO DOESN'T EXIST AT ALL.
;FREE UP A WINDOW PAGE, THEN CALL NEWWIN TO INITIALIZE IT.
PUSHJ P,FREWIN ;FREE UP A WINDOW
POP P,T ;RESTORE CORRECT ACS FOR NEWWIN
POP P,R ; . . .
PUSHJ P,NEWWIN ;SET IT UP TO POINT TO THE FILE PAGE
POPJ P, ;FAILED, PROPAGATE ERROR
JRST STORF9 ;OK, UPDATE EOF AND DO THE STORE
;HERE WHEN THE ADDRESS WE WANT DOESN'T EXIST, BUT AN EARLIER PART OF
;THE SAME PAGE DOES. READ IN THE PART THAT EXISTS, THEN DO THE STORE.
STORF4: PUSHJ P,SRHWIN ;SEE IF ALREADY IN MEMORY
CAIA ;NO, NEED TO READ IT IN
JRST STORF6 ;YES, JUST GO STORE INTO IT
PUSHJ P,FREWIN ;FREE UP A WINDOW
PUSHJ P,REDWIN ;READ OUR FILE PAGE INTO IT
JRST [POP P,T ;ERROR, POP ACS AND RETURN
POP P,R ; . . .
POPJ P,] ; . . .
;HERE WHEN WE ARE CREATING A NEW FILE PAGE. SEE IF THE END-OF-FILE
;POINTER (IN FILDDT) NEEDS TO BE UPDATED, AND DO SO IF NEEDED.
STORF6: POP P,T ;RESTORE DATA TO BE DEPOSITED
POP P,R ;RESTORE ADDRESS TO DEPOSIT INTO
CAMGE R,MAXSIZ ;BEYOND EOF?
JRST STORF9 ;NO, JUST GO STORE
MOVEM R,MAXSIZ ;YES, UPDATE TO NEW LAST WORD
AOS MAXSIZ ;MAKE NUMBER OF WORDS IN FILE
JRST STORF9 ;NOW GO DO THE STORE
;STILL FTFILE
;HERE WHEN THE WORD WE ARE DEPOSITING INTO ALREADY EXISTS. JUST
;READ IT IN AND DO THE DEPOSIT.
STORF8: PUSHJ P,SRHWIN ;ALREADY IN MEMORY?
CAIA ;NO, NEED TO READ IT IN
JRST STORF9 ;YES, JUST GO DEPOSIT
PUSH P,T ;SAVE DATA TO STORE OVER ???WIN
PUSHJ P,FREWIN ;FREE UP A WINDOW
PUSHJ P,REDWIN ;READ IN OUR PAGE
JRST [POP P,T ;ERROR, RESTORE AC AND RETURN
POPJ P,] ; . . .
POP P,T ;RESTORE T
;HERE WHEN A WINDOW IS SET UP, WITH T=DATA TO STORE, R=ADDRESS TO
;STORE INTO, TT2=WINDOW CONTAINING THE ADDRESS R.
STORF9: MOVE TT,TT2 ;GET WINDOW NUMBER
LSH TT,PG2WRD ;CONVERT TO OFFSET INTO WINDOW AREA
ADD TT,WIND0 ;MAKE A REAL ADDRESS
MOVEI TT1,PAGMSK ;WORD INDEX INTO PAGE MASK
AND TT1,R ;GET WORD INDEX
ADD TT1,TT ;POINT INTO BUFFER AREA
MOVEM T,(TT1) ;DO THE STORE
IFN FTDEC20,<ERJMP CPOPJ> ;GIVE ERROR IF CAN'T DO THE STORE
SETOM LASTPG ;STORE COULD HAVE CHANGED PROPERTIES
MOVX TT1,SV$MOD ;THE PAGE MODIFIED BIT
IORM TT1,WINDIR(TT2) ;SET THE MODIFIED BIT
JRST CPOPJ1 ;SUCCESSFUL RETURN
;STILL FTFILE
IFN FTDEC10,<
MONPOK: SKIPE JOBING ;JOBPEK'ING?
JRST JOBPOK ;YES
PUSHJ P,CHKADR ;VERIFY ADDRESS
TXNN TT,PG$WRT ;CAN WE WRITE IT?
POPJ P, ;NO
PUSH P,T ;SAVE ARGUMENT
MOVEM T,POKBLK+2 ;SET AS NEW VALUE
MOVEM R,POKBLK ;NOTE--LAST TYPEOUT IS IN POKBLK+1
; SO THAT USER MUST KNOW WHAT
; HE IS CHANGING
MOVE T,[3,,POKBLK] ;GET POINTER
SKIPE MAPFN ;PHYSICAL OR VIRTUAL POKING?
JRST PHYPOK ;PHYSICAL
POKE. T, ;ORDINARY [MONITOR] VIRTUAL
JRST [POP P,T ;CLEAN UP STACK ON ERROR
POPJ P,] ;PASS ERROR ON TO CALLER
POP P,T ;RESTORE VALUE
JRST CPOPJ1 ;SKIP RETURN
PHYPOK: POKE. T,UU.PHY ;PHYSICAL POKE OF RUNNING MEMORY
JRST [POP P,T ;RESTORE T ON ERROR
POPJ P,] ;PASS ERROR ON TO CALLER
POP P,T ;RESTORE STACK
JRST CPOPJ1 ;RETURN SUCCESSFULLY
JOBPOK: MOVEI TT,TT1 ;ADDRESS OF ARG LIST
HRLZ TT1,JOBING ;JOB WHOSE MEMORY IS TO BE WRITTEN
IOR TT1,[1B0+1] ;WRITE ONLY ONE WORD
HRRZ TT2,R ;ADDRESS TO BE WRITTEN (HIS JOB)
HRLI TT2,T ;ADDRESS TO WRITE FROM (OUR JOB)
TLNN R,-1 ;BY THE WAY, ADDRESS WITHIN LIMITS?
JOBPEK TT, ;ASK MONITOR TO WRITE MEMORY
POPJ P, ;ERROR
JRST CPOPJ1 ;SUCCESS
> ;END OF IFN FTDEC10
IFN FTDEC20,< MONPOK==CPOPJ > ;NO POKING ON TOPS-20
DEPNPT: AOSE DEPNCT ;FIRST TIME THROUGH HERE?
POPJ P, ;NO
TMSG <
? Patching is not enabled
>
JRST CPOPJ1
;STILL FTFILE
;SYMBOL STORING FOR FILDDT
DEPSYM: PUSHJ P,SAVR ;PRESERVE FOR CALLERS
PUSHJ P,R2ADDR ;CONVERT TO AN ADDRESS
CAML R,FISBEG ;BELOW BEGINNING OF SYMS?
CAMLE R,FISEND ;OR BEYOND END?
POPJ P, ;YES, GIVE ERROR ERTURN
CAME T,(R) ;SEE IF DIFFERENT
SETOM CHGSFL ;YES--FLAG THAT SYMBOLS CHANGED
MOVEM T,(R) ;STORE NEW VALUE
JRST CPOPJ1 ;RETURN
> ;END OF IFN FTFILE
IFE FTEXEC,<
STOREP==STOREV ;NON-EDDT PHYSICAL STORE GOES TO VIRTUAL
STORE3==STORE6 ; DITTO
> ;END IFE FTEXEC
;FETCH AND DEPOSIT INTO REGISTERS (FAKE 0 - 17)
;CALL WITH A "JSP TT1," SINCE LOCATIONS 0 - 17 MAY NOT ALWAYS
;BE FAKED (DATA FILE FORMAT OR PHYSICAL MEMORY)
FETFAC: TDNN R,[777776,,777760] ;FETCH TO AN AC?
SKIPN FAKEAC ;USING FAKE 0 - 17?
JRST (TT1) ;NO, CONTINUE IN MAIN SEQUENCE
ANDI R,17 ;YES, REDUCE TO AC NUMBER
MOVE T,AC0(R) ;FETCH FAKE 0 - 17
JRST CPOPJ1 ;ALWAYS SUCCESSFUL
STOFAC: TDNN R,[777776,,777760] ;STORE TO AN AC?
SKIPN FAKEAC ;USING FAKE 0 - 17?
JRST (TT1) ;NO, CONTINUE IN MAIN SEQUENCE
ANDI R,17 ;YES, REDUCE TO AC NUMBER
MOVEM T,AC0(R) ;DEPOSIT FAKE 0 - 17
JRST CPOPJ1 ;ALWAYS SUCCESSFUL
SUBTTL MEMORY MANAGEMENT ROUTINES -- ADDRESS MAPPING
;MAPADR -- MAP USER VIRTUAL ADDRESS GIVEN $U PAGE MAP
;CALL IS:
;
; MOVX R,<ADR>
; PUSHJ P,MAPADR
; ERROR
; NORMAL RETURN
;
;WHERE <ADR> IS THE VIRTUAL ADDRESS TO BE MAPPED.
;
;ERROR RETURN IS TAKEN IF SOME WORD (E.G., A PAGE TABLE ENTRY)
;IS INACCESSIBLE OR A PAGE TABLE ENTRY DOESN'T EXIST
;
;NORMAL RETURN IS TAKEN WITH R RELOCATED INTO PHYSICAL MEMORY
;SPACE AS PER THE PAGE MAP IN MAPFN AND MAPPG.
;
;USES TT, TT1, TT2
MAPADR: SKIPG MAPFN ;NO MAPPING OR PHYSICAL ADDRESSING?
JRST CPOPJ1 ;YES, ALL DONE
PUSHJ P,SAVT ;PRESERVE T
MOVE T,MAPFN ;GET MAPPING FUNCTION AND FLAG(S)
MOVEI TT1,-1(T) ;FUNCTION (BASED AT 0) IN TT1
TXNE T,1B1 ;SPT INDEX FLAG
SKPKIP ;CAN'T HAVE SPT INDEX WITH KI PAGING
CAIL TT1,MFNMAX ;LEGAL FUNCTION?
JRST ERR ;SOMETHING'S WRONG
JRST @MFNDSP(TT1) ;DISPATCH ON $U FUNCTION CODE
;DISPATCH TABLE FOR MAPPING FUNCTIONS. FIRST FUNCTION IS 1.
MFNDSP: IFIW MAPEPT ;MAP THRU EPT IN MAPPG
IFIW MAPUPT ;MAP THRU UPT IN MAPPG
IFIW MAPSEC ;MAP THRU SECTION MAP IN MAPPG
MFNMAX==.-MFNDSP
IFL <PFNMAX-MFNMAX>,<PRINTX ? TOO MANY MAPADR FUNCTIONS>
;MAP THROUGH EPT IN MAPPG
MAPEPT: SKPKIP ;KI PAGING?
JRST MAPKL ;NO, GO SEE IF KL PAGING
TLNE R,-1 ;KI-PAGING ONLY ALLOWS 18-BIT VIRTUAL ADR
POPJ P, ;ILLEGAL ADDRESS
LDB T,[POINT 9,R,26];GET PAGE #
CAIGE T,340 ;IS THERE A MAP ENTRY?
JRST CPOPJ1 ;NO--LOOK IN PHYSICAL CORE
CAIL T,400 ;PER PROCESS
JRST MAPKI ;NO--JUST LIKE USER
PUSH P,R ;SAVE ARGUMENT
LSH T,-1 ;CONVERT TO 1/2 WORD
HLRE R,MAPPG ;GET ADDRESS OF UPT
JUMPL R,MAPAD9 ;NO ACCESS IF NO UPT SPECIFIED
ANDI R,17777 ;JUST PAGE NUMBER
LSH R,PG2WRD ;CONVERT TO WORD
ADDI R,400-<340/2>(T);FOR THIS PAGE
JRST MAPKI2 ;GO FETCH PAGE TABLE ENTRY
;MAP THROUGH UPT IN MAPPG
MAPUPT: SKPKIP ;KI PAGING?
JRST MAPKL ;NO, JUST LIKE EPT
;HERE TO FETCH AN ENTRY FROM A MAP SLOT
MAPKI: LDB T,[POINT 12,MAPPG,35] ;FETCH PAGE NUMBER OF PT
PUSH P,R ;SAVE R FOR CALLER
LSH T,PG2WRD ;CONVERT TO WORD
LSH R,-12 ;CONVERT TO 1/2 WORD IN MAP
ANDI R,377 ;MASK OUT JUNK
ADD R,T ;ADDRESS OF MAP ENTRY
MAPKI2: PUSHJ P,FETCHP ;FETCH PAGE TABLE ENTRY
MOVEI T,017000 ;ERROR
POP P,R ;RESTORE R
TRNN R,1000 ;ODD PAGE
HLRZ T,T ;NO--FLIP ENTRY
TRZN T,400000 ;VALID ENTRY
POPJ P,0 ;NO--ERROR
ANDI T,17777 ;JUST PAGE #
LSH T,PG2WRD ;CONVERT TO WORD ADDRESS
ANDI R,PAGMSK ;GET NEW ADDRESS
IOR R,T ; . . .
JRST CPOPJ1 ;GIVE GOOD RETURN
;HERE TO MAP THROUGH SECTION TABLE IN MAPPG
MAPSEC: TLNN R,-1 ;SECTION TABLE ONLY HAS 18 BITS OF ADDRESS
SKPKLP ;AND IS ONLY AVAILABLE IF KL PAGING
POPJ P, ;ERROR
PUSH P,R ;SAVE VIRTUAL ADDRESS
MOVE T,MAPPG ;GET PAGE # OR SPT SLOT
MOVE R,MAPFN ;GET FLAGS
TXNN R,1B1 ;AN SPT SLOT?
JRST MAPSE6 ;A PAGE NUMBER, JUST GO USE THE SECTION TABLE
TXO T,2B2 ;AN SPT SLOT, FAKE A SHARE POINTER
PUSHJ P,MAPTY ;FIND EFFECTIVE ADDRESS
JRST MAPAD9 ;ACCESS ERROR
JRST MAPKL6 ;JOIN COMMON CODE
;HERE WHEN T CONTAINS A PAGE NUMBER. PUT WORD NUMBER INTO T.
MAPSE6: LSH T,PG2WRD ;MAKE INTO ADDRESS
JRST MAPKL6 ;JOIN COMMON CODE
;HERE WHEN NOT KI PAGING FOR AN EPT OR UPT. SEE IF KL PAGING.
MAPKL: SKPKLP ;KL-PAGING?
POPJ P, ;NO, THEN DON'T KNOW WHAT TO DO
HLRZ T,R ;SECTION DESIRED
CAILE T,37 ;WITHIN RANGE?
POPJ P, ;NO, ERROR
PUSH P,R ;SAVE R
MOVE T,MAPPG ;GET PAGE # OR SPT INDEX
MOVE R,MAPFN ;FUNCTION AND FLAGS
TXNN R,1B1 ;SPT INDEX OR PAGE NUMBER?
JRST MAPKL2 ;PAGE NUMBER, PROCEED
TXO T,2B2 ;FAKE SHARE POINTER
PUSHJ P,MAPTY ;CONVERT TO ADDRESS OF PAGE
JRST MAPAD9 ;ERROR
SKIPA ;ALREADY A WORD ADDRESS
MAPKL2: LSH T,PG2WRD ;WORD ADDRESS OF UPT/EPT
MOVE R,T ;SAVE IN R
HLRZ T,0(P) ;RE-FETCH SECTION NUMBER
ADDI R,540(T) ;YES, GET DESIRED SECTION TABLE POINTER
PUSHJ P,FETCHP ;FETCH SECTION TABLE POINTER
JRST MAPAD9 ;INACCESSIBLE, ERROR
PUSHJ P,MAPTY ;EVALUATE SECTION TABLE POINTER
JRST MAPAD9 ;SOMETHING WRONG SOMEWHERE
MAPKL6: LDB R,[POINTR <0(P)>,<PAGMSK_PG2WRD>] ;PAGE NUMBER WITHIN SECTION
ADD R,T ;POINT TO PAGE POINTER IN SECTION TABLE
PUSHJ P,FETCHP ;GET PAGE POINTER
JRST MAPAD9 ;INACCESSIBLE, ERROR
PUSHJ P,MAPTY ;EVALUATE PAGE POINTER
JRST MAPAD9 ;INACCESSIBLE
POP P,R ;RETRIEVE ORIGINAL ADDRESS
ANDI R,PAGMSK ;FORM OFFSET WITHIN PAGE
IOR R,T ;R:=PHYSICAL WORD ADDRESS
JRST CPOPJ1 ;RETURN SUCCESSFULLY
;HERE ON SOME TYPE OF ACCESS FAILURE
MAPAD9: POP P,R ;POP OLD ADDRESS OFF OF STACK
POPJ P, ;GIVE ERROR RETURN TO USER
;MAPTY -- DECODE MAP POINTER TYPE AND RETURN PHYSICAL PAGE ADDRESS
;CALL IS:
;
; MOVX T,<MAP POINTER>
; PUSHJ P,MAPTY
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <MAP POINTER> IS A HARDWARE TYPE MAP POINTER FROM A UPT/SPT
;OR A SECTION TABLE.
;
;THE ERROR RETURN IS TAKEN IF AN ILLEGAL POINTER TYPE IS ENCOUNTERED
;OR A WORD IN THE POINTER CHAIN IS INACCESSIBLE.
;
;THE NORMAL RETURN IS TAKEN WITH T CONTAINING THE PHYSICAL ADDRESS
;OF THE BASE OF THE PAGE POINTED AT BY THE ORIGINAL POINTER.
;
;USES R, T
MAPTY: LDB R,[POINT 3,T,2] ;GET TYPE CODE
JRST @MAPTBL(R) ;DISPATCH ON CODE
;HANDLE IMMEDIATE MODE POINTER
MAPTY1: TLNE T,17 ;INCORE?
POPJ P, ;NO, THEREFORE INACCESSIBLE
ANDI T,17777 ;YES - GET PAGE #
LSH T,PG2WRD ;MAKE INTO WORD ADDRESS
JRST CPOPJ1 ;SUCCESS
;HANDLE SHARED POINTER
MAPTY2: HRRZ R,T ;GET SPT INDEX AGAIN
PUSHJ P,GVSPT ;GET BASE ADDRESS OF SPT
POPJ P, ;NOT IN ADDRESS SPACE!
ADD R,TT ;RELOCATE INTO SPT
PUSHJ P,FETCHP ;GET THE POINTER WORD
POPJ P, ;INACCESSIBLE, ERROR
JRST @MAPTBL+1 ;TREAT LIKE TYPE 1 (IMMEDIATE)
;HANDLE INDIRECT POINTER
MAPTY3: LDB R,[POINT 9,T,17];GET PAGE # (INDIRECT)
TLZ T,-1 ; AND NEW SPTX
PUSH P,R ;SAVE PAGE #
PUSHJ P,GVSPT ;GET BASE ADDR OF SPT
POPJ P, ;NO IN ADDRESS SPACE
MOVE R,TT ;PUT INTO AC R
ADD R,T ;ADD IN INDEX
PUSHJ P,FETCHP ;GET SPT ENTRY
MOVEI T,0
POP P,R ;RESTORE PAGE #
JUMPE T,CPOPJ ;ERROR
TLNE T,17 ;IN CORE?
POPJ P, ;NO, ERROR
ANDI T,17777 ;PAGE # OF PT
LSH T,PG2WRD ;CONVERT TO CORE ADDRESS
ADD R,T ;ADD IN PAGE #
PUSHJ P,FETCHP ;GET PAGE POINTER
POPJ P, ;INACCESSIBLE, ERROR
JRST MAPTY ;AND START OVER
MAPTBL: IFIW CPOPJ ;0 - NO PAGE
IFIW MAPTY1 ;1 - IMMEDIATE POINTER
IFIW MAPTY2 ;2 - SHARED POINTER
IFIW MAPTY3 ;3 - INDIRECT POINTER
IFIW CPOPJ ;4 - ILLEAGL
IFIW CPOPJ ;5 - ILLEGAL
IFIW CPOPJ ;6 - ILLEGAL
IFIW CPOPJ ;7 - ILLEGAL
SUBTTL MEMORY MANAGEMENT ROUTINES -- PHYSICAL MEMORY
IFE FTFILE,<
IFN FTEXEC,<
;PHYIN -- EXECUTE INSTRUCTION REFERING TO PHYSICAL MEMORY SPACE
;CALL IS:
;
; MOVX R,<PHY-ADR>
; MOVX TT2,<INSTR>
; PUSHJ P,PHYIN
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <PHY-ADR> IS THE DESIRED PHYSICAL MEMORY ADDRESS TO BE REFER-
;ENCED; AND <INSTR> IS THE INSTRUCTION TO REFERENCE (OPERATE ON) THE
;PHYSICAL MEMORY LOCATION INDIRECTING THROUGH REGISTER "R" (E.G.,
;"MOVE T,@R"). NOTE THAT THIS ROUTINE SUPPLIES THE LOCAL INDIRECT
;ADDRESS (IN THIS CASE, "R") SO CALLER ONLY HAS TO PROVIDE OPERATOR
;AND AC FIELDS - THE REST OF TT2 MAY BE BLANK.
;
;THE ERROR RETURN IS TAKEN IF THE DESIRED PHYSICAL ADDRESS CANNOT BE
;REFERENCED, OTHERWISE THE NORMAL RETURN IS TAKEN AFTER HAVING EXE-
;CUTED THE INSTRUCTION IN AC "TT2".
PHYIN: SKPKIP ;KI-PAGING IN EFFECT?
JRST PHYI20 ;NO
PUSHJ P,GVEPT ;FIND VIRTUAL ADR OF EPT
POPJ P, ;NO EPT (E.G., A KA-10)
PUSH P,377(TT) ;SAVE A HANDY MAP SLOT
PUSH P,TT ;AND ADDRESS ALSO
MOVE TT1,R ;WORKING COPY OF PHYSICAL ADR
LSH TT1,WRD2PG ;PHYSICAL PAGE NUMBER
CAILE TT1,17777 ;WITHIN CONCEPTUAL LIMITS?
JRST PHYI17 ;NO, ERROR, ADDRESS TOO BIG
IORI TT1,700000 ;ACCESSIBLE, READ, WRITE, PUBLIC
HRRM TT1,377(TT) ;MAP PHYSICAL ADDRESS
PUSHJ P,CLRAM ;CLEAR THE ASSOCIATIVE MEMORY
ANDI R,000777 ;OFFSET WITHIN PAGE
IORI R,777000 ;RELOCATE THROUGH VIRTUAL PAGE
PUSHJ P,CHKADR ;SEE WHAT TYPE OF PAGE IT IS
TXNN TT,PG$EXI ;DOES PAGE EXIST?
JRST PHYI17 ;NO
TXNE TT,PG$REA ;CAN WE READ
TXNN TT,PG$WRT ;AND WRITE IT?
JRST PHYI17 ;NO??!!
HRRI TT2,R ;SUPPLY INDIRECT ADDRESS
PUSH P,TT2 ;SAVE THE INSTRUCTION
JSP TT2,PCAFI ;SUPPRESS ADDRESS BREAK AND
XCT (P) ;EXECUTE THE OPERATION
AOS -3(P) ;TAKE SUCCESSFUL RETURN
POP P,TT2 ;RESTORE STACK
PHYI17: POP P,TT ;VIRTUAL ADDRESS OF EPT
POP P,377(TT) ;RESTORE MAP SLOT
PJRST CLRAM ;AND RESET THE ASSOCIATIVE MEMORY
;STILL IN IFE FTFILE & IFN FTEXEC
PHYI20: SKPKLP ;KL-PAGING?
POPJ P, ;NO CAN DO
PUSHJ P,GVEPT ;FIND VIRTUAL ADDRESS OF EPT
POPJ P, ;ERROR
SKIPL CSTWRD ;DO WE HAVE A CST?
SKIPGE SPTWRD ;AND AN SPT?
POPJ P, ;NO, CAN'T DO IT
MOVE TT,540(TT) ;GET THE SECTION 0 POINTER
PHYI22: LDB TT1,[POINT 3,TT,2] ;EXTRACT POINTER TYPE FIELD
CAIN TT1,1 ;IMMEDIATE POINTER?
JRST PHYI24 ;YES, TRIVIAL
CAIE TT1,2 ;SHARED POINTER?
POPJ P, ;NO, DON'T HANDLE INDIRECT OR OTHERS
ANDI TT,777777 ;SHARED - REDUCE TO SPT INDEX
ADD TT,SPTWRD ;RELOCATE INTO SPT
MOVE TT,@TT ;GET [IMMEDIATE] POINTER
PHYI24: ANDI TT,17777 ;REDUCE TO PHYSICAL PAGE NUMBER
PUSHJ P,FPVPG ;VIRTUAL ADDRESS (SECTION 0 PAGE TABLE)
POPJ P, ;ERROR - NOT MAPPED
ADD TT,CSTWRD ;POINT TO CST WORD FOR SECTION TABLE
PUSH P,@TT ;SAVE IT
PUSH P,TT ;SAVE ADDRESS ALSO
SUB TT,CSTWRD ;BACK TO PHYSICAL PAGE NUMBER
LSH TT,PG2WRD ;WORD ADDRESS OF SECTION TABLE
ADDI TT,777 ;PAGE 777 IN SECTION 0
PUSH P,@TT ;SAVE PAGE 777 POINTER
PUSH P,TT ;AND ADDRESS OF POINTER
MOVE TT1,R ;COPY OF REQUESTED ADDRESS
LSH TT1,WRD2PG ;PHY PAGE OF DESIRED WORD
CAILE TT1,17777 ;WITHIN REASON?
JRST PHYI27 ;NO, ERROR
TXO TT1,1B2!1B4 ;MAKE INTO WRITE-ENABLE IMMEDIATE PTR
MOVEM TT1,@TT ;UPDATE SECTION TABLE
TXZ TT1,1B2!1B4 ;BACK TO PAGE NUMBER
ADD TT1,CSTWRD ;CST ENTRY FOR THAT PAGE
PUSH P,@TT1 ;SAVE CST ENTRY FOR DESIRED PAGE
PUSH P,TT1 ;AND ITS ADDRESS (WHEW!)
MOVSI TT,(100B8) ;REASONABLE AGE FIELD FOR CST ENTRY
MOVEM TT,@TT1 ;TO PREVENT AGE FAULT FROM DDT
;FALL THROUGH TO NEXT PAGE
;STILL IN IFE FTFILE & IFN FTEXEC
PUSHJ P,CLRAM ;CLEAR PAGING MEMORY
ANDI R,000777 ;OFFSET WITHIN PAGE
IORI R,777000 ;RELOCATE PHYSICAL TO VIRTUAL ADDRESS
PUSHJ P,CHKADR ;MAKE SURE IT REALLY EXISTS
TXNN TT,PG$EXI ;DOES PAGE EXIST?
JRST PHYI26 ;NO - ALL FOR NAUGHT (SIGH)
TXNE TT,PG$REA ;YES, CAN WE READ
TXNN TT,PG$WRT ;AND WRITE IT?
JRST PHYI26 ;NO??!! IMPOSSIBLE
HRRI TT2,R ;SETUP FOR INDIRECTION
PUSH P,TT2 ;SAVE THE INSTRUCTION
JSP TT2,PCAFI ;SUPPRESS ADDRESS BREAK AND
XCT (P) ;REFERENCE DESIRED PHYSICAL ADDRESS
AOS -7(P) ;SUCCESSFUL RETURN
POP P,TT2 ;RESTORE STACK
PHYI26: POP P,TT1 ;ADDR OF CST ENTRY FOR REFERENCED PAGE
MOVEI TT,1 ;THE CST "MODIFIED" BIT
TDNE TT,@TT1 ;SET IN REAL CST?
IORM TT,0(P) ;YES, PRESERVE IT THEN
POP P,@TT1 ;RESTORE CST ENTRY (WITH UPDATED M BIT)
PHYI27: POP P,TT ;ADDRESS OF SECTION 0 SECTION TABLE
POP P,@TT ;RESTORE PAGE 777 POINTER
POP P,TT1 ;CST ADDRESS FOR SECTION TABLE
POP P,@TT1 ;RESTORE IT VERBATIM
PJRST CLRAM ;AND CLEAR PAGING MEMORY AGAIN
> ;END IFN FTEXEC
> ;END IFE FTFILE
SUBTTL MEMORY MANAGEMENT ROUTINES -- FILDDT I/O
IFN FTFILE,<
;REDWIN -- READ FILE PAGE INTO FILDDT MEMORY WINDOW
;WRTWIN -- WRITE FILE PAGE FROM FILDDT MEMORY WINDOW
;CALL IS:
;
; MOVX TT1,<FPN>
; MOVX TT2,<WIN>
; MOVX R,<ADDRESS DESIRED>
; PUSHJ P,REDWIN/WRTWIN
; ERROR
; NORMAL RETURN
;
;WHERE <FPN> IS THE DESIRED FILE PAGE NUMBER AND <WIN> IS THE
;FILDDT MEMORY WINDOW NUMBER.
;
;ON ERROR RETURN THE DESIRED I/O CANNOT BE PERFORMED.
;
;ON NORMAL RETURN THE WINDOW NAMED BY TT2 WILL HAVE BEEN READ/WRITTEN
;AS APPROPRIATE TO/FROM THE FILE PAGE NUMBER OF TT1, WINFPN HAS BEEN
;SET TO THE APPROPRIATE FILE PAGE NUMBER, AND SV$MOD HAS BEEN CLEARED.
;
;DESTROYS ACS T AND TT.
REDWIN: TDZA T,T ;FLAG READING
WRTWIN: SETO T, ;FLAG WRITING
MOVEM TT1,WINTT1 ;SAVE TT1 AS ADVERTISED
MOVEM TT2,WINTT2 ;SAVE TT2 . . .
IFN FTDEC10,< ;FIRST, TOPS-10 STYLE
MOVE TT2,TT1 ;REALLY WANT PAGE NUMBER IN TT2
LSH TT2,PG2BLK ;AND REALLY WANT DISK BLOCK NUMBER
SKIPE PHYSIO ;SUPER I/O TO DISK?
JRST FILIO4 ;YES, GO DO SUSET RATHER THAN FILOP.
AOJ TT2, ;"RELOCATE" PAST BLOCK 0 (FIRST RIB)
MOVE TT,[2,,TT1] ;FILOP. POINTER
MOVSI TT1,FIL ;I/O CHANNEL NUMBER
JUMPN T,FILIO2 ;IF WRITE, GO DO "USETO"
HRRI TT1,.FOUSI ;"USETI" FUNCTION
FILOP. TT, ;POINT I/O TO DESIRED BLOCK NUMBER
JRST FILIOE ;FAILED
JRST FILIO6 ;GO DO I/O
FILIO2: HRRI TT1,.FOUSO ;"USETO" FUNCTION
FILOP. TT, ;POINT I/O TO DESIRED BLOCK
JRST FILIOE ;FAILED
JRST FILIO6 ;GO DO I/O
;STILL IN FTFILE & FTDEC10
;HERE TO SET FOR SUPER I/O (PHYSICAL I/O TO UNIT/STRUCTURE)
FILIO4: TXO TT2,<Z FIL,> ;SLIP IN CHANNEL NUMBER
SKIPE T ;READ OR WRITE
TXO TT2,SU.SOT ;WRITE
SUSET. TT2, ;SELECT BLOCK NUMBER
JRST FILIOE ;FAILED
TXZ TT2,<<Z FIL,>!SU.SOT> ;FALL INTO I/O
;HERE TO DO ACTUAL I/O ONCE BLOCK IS SELECTED
FILIO6: MOVE TT1,WINTT2 ;WINDOW NUMBER
LSH TT1,PG2WRD ;CONVERT TO WORD ADDRESS (INDEX)
ADD TT1,WIND0 ;RELOCATE INTO FILDDT BUFFER AREA
HRLI TT1,-PAGSIZ ;CONCOCT AN IOWD POINTER
SKIPE EXEFMT ;AN EXE FILE?
JRST FILIO7 ;YES, MAXSIZ IS IRRELEVANT
MOVE TT2,R ;ACTUAL ADDRESS DESIRED
IORI TT2,PAGMSK ;ROUND TO BOTTOM OF PAGE
CAMGE TT2,MAXSIZ ;PAST EOF?
JRST FILIO7 ;NO, NOTHING TO WORRY ABOUT
AND TT2,MAXSIZ ;YES, GET LOW ORDER ADDRESS BITS
ANDI TT2,PAGMSK ;AND ONLY LOW ORDER BITS
MOVNI TT2,(TT2) ;NEGATE (FOR IOWD COUNT)
HRL TT1,TT2 ;AND ADJUST I/O COMMAND LIST
FILIO7: SOJ TT1, ;RH(IOWD) IS ADDRESS MINUS ONE
SETZ TT2, ;END OF I/O LIST
JUMPN T,FILIO8 ;READ OR WRITE
IN FIL,TT1 ;READ
JRST FILIOS ;SUCCESS
JRST FILIO9 ;FAILURE
FILIO8: OUT FIL,TT1 ;WRITE
JRST FILIOS ;SUCCESS
FILIO9: SETSTS FIL,.IODMP ;CLEAR ERROR BITS
TMSG <
? I/O error
> ;WARN USER
JRST FILIOS ;LET USER SEE WHATEVER WE GOT
> ;END OF IFN FTDEC10
;STILL FTFILE
IFN FTDEC20,< ;TOPS-20 STYLE
SKIPE PHYSIO ;SUPER I/O?
JRST FILIO4 ;YES, SPECIAL CODE
JUMPN T,FILIOS ;MONITOR WILL RE-WRITE AUTOMATICALLY
PUSHJ P,SAVT4 ;PRESERVE SOME ACS
MOVE T1,TT1 ;FILE PAGE NUMBER
HRL T1,FILJFN ;JFN OF FILE
MOVE T2,TT2 ;GET WINDOW NUMBER
LSH T2,PG2WRD ;MAKE WORD ADDRESS
ADD T2,WIND0 ;RELOCATE INTO BUFFER AREA
LSH T2,WRD2PG ;BACK TO PAGE NUMBER
HRLI T2,.FHSLF ;THIS PROCESS
MOVX T3,PM%RD ;WE WANT TO READ
SKIPE PATCHS ;PATCHING ENABLED?
TXO T3,PM%WR ;YES, SAY WE WANT TO WRITE ALSO
PMAP% ;GET THE FILE PAGE
ERJMP FILIOE ;CAN'T
JRST FILIOS ;PAGE IS MAPPED
;STILL FTFILE & FTDEC20
;HERE FOR SUPER I/O TO DISK UNIT/STRUCTURE
FILIO4: PUSHJ P,SAVT4 ;SAVE ACS FOR REST OF FILDDT
SKIPL T1,PHYSIO ;WANT PHYSICAL UNIT OR STRUCTURE?
SKIPA TT,[POINTR T1,DOP%UA] ;PHYS UNIT, ADDR GOES IN DOP%UA
MOVE TT,[POINTR T1,DOP%RA] ;STRUCTURE, ADDR GOES IN DOP%RA
LSH TT1,PG2BLK ;DSKOP WANTS BLOCK NUMBER
DPB TT1,TT ;PUT BLOCK NUMBER IN RIGHT FIELD IN T1
LDB TT,TT ;GET BLOCK NUMBER BACK FROM T1
CAME TT,TT1 ;DID WHOLE THING GET STORED?
JRST FILIOE ;BLOCK # TOO BIG! DON'T WRAP AROUND
LSH TT1,BL2WRD ;CONVERT ADDRESS TO WORDS
MOVX T2,PAGSIZ ;ASSUME WE'LL READ A PAGE
IORI TT1,PAGMSK ;ROUND WORD ADDR UP TO END OF PAGE
CAMGE TT1,MAXSIZ ;WOULD READING A PAGE BE TOO MUCH?
JRST FILIO5 ;NO, PROCEED
MOVE T2,MAXSIZ ;YES, WE'LL ONLY READ LAST PARTIAL PAGE
ANDI T2,PAGMSK ;CLEAR EXTRANEOUS BITS
FILIO5: DPB T,[POINTR T2,DOP%WR] ;SET READ OR WRITE FLAG
MOVE T3,TT2 ;GET INTERNAL PAGE NUMBER
LSH T3,PG2WRD ;CONVERT TO WORDS
ADD T3,WIND0 ;ADD BUFFER BASE ADDRESS
MOVE T4,PHYSTR ;GET STRUCTURE DESIGNATOR IF STR
DSKOP% ;DO THE I/O
ERJMP FILIOE ;FAILED, COMPLAIN
JUMPE T1,FILIOS ;IF NO I/O ERROR, GIVE OK RETURN
TMSG <
? I/O error
> ;TELL THE USER WHAT'S UP
JRST FILIOS ;GIVE OK RETURN
> ;END OF IFN FTDEC20
;HERE TO STORE THE FPN INTO WINFPN, CLEAR SV$MOD, AND
;GIVE A SKIP RETURN FROM REDWIN/WRTWIN.
FILIOS: MOVE TT1,WINTT1 ;RESTORE TT1 AS ADVERTISED
MOVE TT2,WINTT2 ;RESTORE TT2
MOVEM TT1,WINFPN(TT2) ;UPDATE WINFPN
MOVX T,SV$MOD ;GET MODIFIED BIT
ANDCAM T,WINDIR(TT2) ;CLEAR
JRST CPOPJ1 ;GIVE GOOD RETURN.
;HERE TO GIVE AN ERROR RETURN FROM REDWIN/WRTWIN.
FILIOE: MOVE TT1,WINTT1 ;RESTORE TT1
MOVE TT2,WINTT2 ;RESTORE TT2
POPJ P, ;GIVE ERROR RETURN
;STILL FTFILE
;SRHWIN -- ROUTINE TO SEARCH INTERNAL WINDOWS FOR THE FILE
; PAGE IN TT1.
;CALL:
; MOVE TT1,<FILE PAGE>
; PUSHJ P,SRHWIN
; NOT FOUND
; FOUND
;
;ON A NORMAL RETURN, THE FILE PAGE NUMBER IS RETURNED IN TT2.
;USES NO OTHER ACS.
SRHWIN: MOVEI TT2,WINMAX-1 ;COUNT OF WINDOWS
CAME TT1,WINFPN(TT2) ;PAGE IN THIS WINDOW?
SOJGE TT2,.-1 ;NO, TRY NEXT WINDOW
MOVEM TT2,WINTT2 ;SAVE WINDOW NUMBER FOR OTHERS
JUMPGE TT2,CPOPJ1 ;JUMP IF WINDOW ALREADY HAS FILE PAGE
POPJ P, ;NOT FOUND
;FREWIN -- ROUTINE TO FREE UP AN INTERNAL WINDOW
;CALL:
; PUSHJ P,FREWIN
; RETURN
;
;ON RETURN, TT2 CONTAINS THE WINDOW NUMBER OF A FREE WINDOW.
;
;DESTROYS ACS T AND TT.
FREWIN: AOS TT2,WINNUM ;NEXT (ROUND ROBIN) WINDOW TO GO
CAIL TT2,WINMAX ;GONE OFF END (MODULO WINMAX)?
SETZB TT2,WINNUM ;YES, LOOP BACK TO 0
MOVX TT,SV$MOD ;THE MODIFIED BIT
TDNN TT,WINDIR(TT2) ;THIS PAGE BEEN MODIFIED?
POPJ P, ;NO, THEN DON'T HAVE TO RE-WRITE IT
PUSH P,TT1 ;SAVE TT1 AS ADVERTISED
MOVE TT1,WINFPN(TT2) ;OLD (MODIFIED) FILE PAGE NUMBER
PUSHJ P,WRTWIN ;WRITE OUT MODIFIED PAGE
JFCL ;INTERNAL ERROR
POP P,TT1 ;RESTORE TT1
POPJ P, ;RETURN TO CALLER
;STILL FTFILE
;NEWWIN -- ROUTINE TO INITIALIZE A WINDOW TO POINT TO A NEW
; (CURRENTLY NON-EXISTENT) FILE PAGE.
;CALL:
; MOVX TT1,<FILE PAGE>
; MOVX TT2,<WINDOW NUMBER>
; MOVX R,<FILE ADDRESS>
; PUSHJ P,NEWWIN
; ERROR (I/O)
; NORMAL RETURN
;
;DESTROYS AC TT.
NEWWIN: PUSHJ P,SAVRST ;SAVE T, AND R & S FOR TOPS-20
MOVE T,TT2 ;WINDOW NUMBER
LSH T,PG2WRD ;OFFSET WITHIN WINDOW AREA
ADD T,WIND0 ;ABSOLUTE MEMORY ADDRESS
MOVE S,MAXSIZ ;SAVE OLD MAXSIZ IN CASE OF ERROR
CAMGE R,MAXSIZ ;LARGEST ADDRESS YET WRITTEN?
JRST NEWWI2 ;NO, NEVER DECREASE MAXSIZ
MOVEM R,MAXSIZ ;UPDATE MAXSIZ
AOS MAXSIZ ;WE WANT # WORDS, NOT LAST USED
NEWWI2:
IFN FTDEC10,< ;ON TOPS-10, ZERO THE PAGE & WRITE IT
SETZM (T) ;CLEAR THE FILE PAGE
HRLZ TT,T ; . . .
HRRI TT,1(T) ; . . .
BLT TT,PAGSIZ-1(T) ; . . .
PUSHJ P,WRTWIN ;EXTEND THE FILE TO THE NEW SIZE
JRST [MOVEM S,MAXSIZ ;ERROR, FILE DIDN'T GROW AFTER ALL
POPJ P,] ;PROPAGATE ERROR
> ;END IFN FTDEC10
IFN FTDEC20,<
MOVE T1,TT1 ;SOURCE IS FILE PAGE #
HRL T1,FILJFN ;FROM THE CURRENTLY OPEN FILE
MOVE T2,T ;DESTINATION IS ADDRESS IN T
LSH T2,WRD2PG ;PMAP% WANTS A PAGE NUMBER
HRLI T2,.FHSLF ;THIS FORK
MOVX T3,PM%RD!PM%WR ;ONLY GET HERE IF WRITING
PMAP% ;SET UP THE MAPPING (SHOULD NEVER FAIL)
> ;END IFN FTDEC20
MOVEM TT1,WINFPN(TT2) ;SET UP WINFPN
MOVX TT,SV$MOD ;CLEAR SV$MOD
ANDCAM TT,WINDIR(TT2) ;SINCE PAGE HASN'T YET BEEN MODIFIED
JRST CPOPJ1 ;GIVE OK RETURN TO CALLER
> ;END OF IFN FILDDT
SUBTTL MEMORY MANAGEMENT ROUTINES -- SYMBOL TABLE ACCESS
IFN FTMON,<
;SYWSET -- ROUTINE TO SET UP THE SYMBOL WINDOW
;CALL:
; MOVX TT,FLAGS
; MOVE R,<SYMBOL INDEX OR ADDRESS TO PUT IN WINDOW>
; PUSHJ P,SYWSET
; RETURN
;
;ALSO ALLOCATES THE WINDOW AREA IF NEEDED.
;FLAGS:
; 1B0 WRITE-ENABLE THE MAP
; 1B1 R IS AN ADDRESS (OTHERWISE, IT IS A SYMBOL INDEX)
SYWSET: PUSHJ P,SAVT4 ;SAVE TEMP ACS OVER .IMOPR
SKIPE SYWIN ;SYMBOL WINDOW ALLOCATED YET?
JRST SYWS2 ;YES, JUST GO MAP IT
PUSH P,R ;SAVE R OVER .IMOPR
MOVEI T1,.IMALC ;ALLOCATION FUNCTION
MOVEI T2,SYWLEN_WRD2PG;NUMBER OF PAGES TO ALLOCATE
PUSHJ P,.IMOPR ;CALL THE MONITOR TO ALLOCATE IT
JRST SYWERR ;CAN'T -- ASSUME NO SYMBOLS
LSH T1,PG2WRD ;CONVERT PAGE # TO ADDRESS
MOVEM T1,SYWIN ;STORE
IORM T1,SYPTR ;ADJUST FOR PTRSET STORING ZERO
POP P,R ;RESTORE SYMBOL INDEX
;CONTINUED ON NEXT PAGE
;STILL FTMON
;HERE WHEN SYWIN IS SET UP.
SYWS2: MOVEI T1,.IMMAP ;MAP SYMBOLS FUNCTION
TXZN TT,1B1 ;NEED TO MAKE R INTO AN ADDRESS?
PUSHJ P,R2ADDR ;CONVERT R FROM SYMBOL INDEX TO ADDRESS
; MOVE T2,R ;PUT ADDRESS WHERE .IMOPR WANTS IT
ANDCMI T2,SYWMSK ;START MAPPING AT EVEN WINDOW BOUND
LSH T2,WRD2PG ;CONVERT TO PAGE NUMBER IN SYMBOL VAS
MOVE T3,SYWIN ;GET ADDRESS OF OUR WINDOW AREA
LSH T3,WRD2PG ;CONVERT TO PAGE NUMBER IN OUR VAS
MOVEI T4,1000 ;NUMBER OF PAGES IN SECTION 0
SUB T4,T2 ;FIND OUT HOW FAR FROM END WE ARE
CAILE T4,SYWLEN_WRD2PG;LET THAT BE COUNT IF CLOSE TO END
MOVEI T4,SYWLEN_WRD2PG;OTHERWISE, FILL OUR WINDOW
IOR T4,TT ;SET USER'S WRITE BIT APPROPRIATELY
SETOM LASTPG ;THIS MAY CHANGE THE ACCESS OF THESE PAGES
PUSHJ P,.IMOPR ;CALL MONITOR TO DO THE MAPPING
JRST SYWERR ;ERROR
POPJ P, ;DONE
;HERE ON AN ERROR FROM .IMOPR
SYWERR: SETZM @SYMP ;DON'T TRY TO SEARCH ANY MORE
SETZM SAVHSM ; . . .
JRST ERR ;TELL USER SOMETHING'S WRONG
> ;END IFN FTMON
IFN FTEXEC,<
;SYMSPC -- PUT DDT INTO THE ADDRESS SPACE CONTAINING THE SYMBOLS
;NORSPC -- PUT DDT BACK INTO THE NORMAL ADDRESS SPACE
;CALL IS:
; PUSHJ P,SYMSPC/NORSPC
; RETURN
;
;DESTROYS TT1.
SYMSPC: SKIPE HSBLK ;SYMBOLS HIDDEN?
SKIPE @ADRSPC ;ALREADY IN SYMBOL SPACE?
POPJ P, ;NO NEED TO DO ANYTHING
SETOM @ADRSPC ;INDICATE NOW IN ALTERNATE SPACE
JRST NEWSPC ;GO SWITCH
NORSPC: SKIPE HSBLK ;SYMBOLS HIDDEN?
SKIPN @ADRSPC ;ALREADY IN NORMAL SPACE?
POPJ P, ;NOTHING TO DO
SETZM @ADRSPC ;REMEMBER WHERE WE'RE GOING
;FALL INTO NEWSPC
;STILL FTEXEC
;FALL IN FROM ABOVE
;HERE TO SWITCH ADDRESS SPACES. @ADRSPC TELLS US WHICH WAY TO GO.
;HSBLK POINTS TO A BLOCK IN THE FOLLOWING FORMAT:
;
; COUNT OF WORDS FOLLOWING
; <SUB-BLOCKS>
;
;WHERE EACH SUB-BLOCK LOOKS LIKE:
;
; COUNT OF WORDS TO TRANSFER
; ADDRESS OF HARDWARE PAGE POINTERS
; ADDRESS OF ALTERNATE PAGE POINTERS
; ADDRESS OF BLOCK TO SAVE HARDWARE POINTERS IN
;
;TO SWITCH TO THE ALTERNATE ADDRESS SPACE, WE SAVE THE CONTENTS OF
;HARDWARE PAGE POINTERS THRU HARDWARE PAGE POINTERS + COUNT TO TRANSFER - 1
;IN THE SAVE BLOCK, THEN MOVE THE ALTERNATE PAGE POINTERS INTO THE HARDWARE
;BLOCK.
;
;TO SWITCH BACK TO NORMAL SPACE, WE SIMPLY COPY THE ORIGINAL HARDWARE
;POINTERS FROM THE SAVE AREA BACK INTO THE HARDWARE BLOCK.
NEWSPC: SKPUSR ;ARE WE IN EXEC MODE?
PUSHJ P,OKPAG ;IS PAGING ON?
POPJ P, ;NOTHING WE CAN DO
PUSHJ P,SAVRST ;NEED SOME ACS
MOVE R,HSBLK ;GET ADDRESS OF WONDEROUS BLOCK
SKPNS0 ;IN SECTION 0?
TLNN R,-1 ;YES, 30-BIT ADDRESS?
SKIPA S,0(R) ;ALL OK
POPJ P, ;CAN'T SWITCH
ADD S,R ;FIND END OF BLOCK
SKPNS0 ;SECTION 0?
CAMG S,[1,,0] ;YES, IS LAST ADDRESS OK?
SKIPA S,0(R) ;YES, FETCH TOTAL COUNT AGAIN
POPJ P, ;BLOCK IS ILLEGAL
SUBI S,1 ;ALREADY PASSED COUNT WORD
;FALL THRU
;STILL FTEXEC
;FALL IN FROM ABOVE
;LOOP BACK HERE TO PROCESS EACH SUB-BLOCK
NEWSP2: MOVE R,S ;COUNT OF WORDS TO GO
SUBI R,3 ;+1:INITIAL COUNT WORD, -4:LENGTH OF A BLOCK
ADD R,HSBLK ;POINT TO NEXT SUB-BLOCK TO PROCESS
SKIPN @ADRSPC ;WHICH WAY ARE WE GOING?
JRST NEWSP4 ;BACK TO NORMAL
;HERE WHEN GOING TO HIDDEN SYMBOLS.
MOVE TT,0(R) ;COUNT
MOVE TT1,1(R) ;SOURCE IS HARDWARE BLOCK
MOVE TT2,3(R) ;DESTINATION IS SAVE BLOCK
PUSHJ P,DOXBLT ;DO THE COPY
JRST SPCERR ;ERROR, GET OUT
MOVE TT,0(R) ;COUNT
MOVE TT1,2(R) ;SOURCE IS SYMBOL BLOCK
MOVE TT2,1(R) ;DESTINATION IS HARDWARE BLOCK
PUSHJ P,DOXBLT ;TURN ON HIDDEN SYMBOLS
JRST SPCERR ;CAN'T, GET OUT
JRST NEWSP6 ;GO FIND NEXT SUB-BLOCK
;HERE WHEN GOING BACK INTO THE NORMAL SPACE
NEWSP4: MOVE TT,0(R) ;COUNT
MOVE TT1,3(R) ;SOURCE IS SAVE AREA
MOVE TT2,1(R) ;DESTINATION IS HARDWARE BLOCK
PUSHJ P,DOXBLT ;DO THE COPY
JRST SPCERR ;ERROR, GET OUT
;HERE WHEN A SUB-BLOCK IS DONE. ADVANCE TO THE NEXT, IF ANY
NEWSP6: SUBI S,3 ;BLOCKS ARE 4 WORDS
SOJG S,NEWSP2 ;LOOP IF ANY MORE BLOCKS
;FALL THROUGH TO NEXT PAGE
;STILL FTEXEC
;FALL IN FROM ABOVE
;NOW TO SWITCH THE ???WRD CELLS TO THEIR ALTERNATE VALUES.
MOVE T,EPTWRD ;CURRENT VALUE
EXCH T,EPTWRS ;SWAP WITH SAVED VALUE
MOVEM T,EPTWRD ;UPDATE NEW CURRENT VALUE
MOVE T,UPTWRD ;CURRENT VALUE
EXCH T,UPTWRS ;SWAP WITH SAVED VALUE
MOVEM T,UPTWRD ;UPDATE NEW CURRENT VALUE
MOVE T,SPTWRD ;CURRENT VALUE
EXCH T,SPTWRS ;SWAP WITH SAVED VALUE
MOVEM T,SPTWRD ;UPDATE NEW CURRENT VALUE
MOVE T,CSTWRD ;CURRENT VALUE
EXCH T,CSTWRS ;SWAP WITH SAVED VALUE
MOVEM T,CSTWRD ;UPDATE NEW CURRENT VALUE
MOVE T,PAGVAL ;CURRENT VALUE
EXCH T,PAGVAS ;SWAP WITH SAVED VALUE
MOVEM T,PAGVAL ;UPDATE NEW CURRENT VALUE
PJRST CLRAM ;CLEAR PAGER AND RETURN
;HERE ON AN ERROR. IF WE WERE TRYING TO GET BACK TO NORMAL SPACE,
;THEN THERE IS NOTHING WE CAN DO. IF WE WERE TRYING TO GET TO THE
;SYMBOL SPACE, THEN CALL THE ROUTINE TO GO BACK, AND HOPE IT WILL
;FAIL IN THE SAME PLACE.
SPCERR: SKIPE @ADRSPC ;WHERE WERE WE GOING?
PJRST NORSPC ;TO ALTERNATE, TRY TO GET BACK
POPJ P, ;TO NORMAL, ALL DONE
> ;END IFN FTEXEC
;R2ADDR -- ROUTINE TO CONVERT A SYMBOL INDEX IN R TO AN ADDRESS
;CALL:
; MOVE R,<SYMBOL INDEX>
; PUSHJ P,R2ADDR
; RETURN
;
;DESTROYS ONLY R.
R2ADDR: PUSHJ P,SAVT ;NEED AN AC
TXZN R,1B0 ;LOOKING AT HISEG TABLE?
SKIPA T,@SYMP ;NO, GET LOWSEG PTR
MOVE T,SAVHSM ;YES, GET HISEG PTR
TXZE R,1B1 ;REALLY UNDEFINED TABLE?
MOVE T,ESTUT ;YES, POINT TO IT INSTEAD
ADD R,T ;FORM VIRTUAL ADDRESS IN SYMBOL VAS
IFE FTMON,<
HLL R,SECDDT ;SYMBOLS ARE USUALLY IN DDT'S SECTION
> ;END IFE FTMON
IFN FTMON,<
TLZ R,-1 ;EXCEPT THAT THEY ARE IN SECTION 0 IN MDDT
> ;END IFN FTMON
POPJ P, ;DONE
SUBTTL MEMORY MANAGEMENT ROUTINES -- ADDRESS CHECKING
;CHKSYP -- VALIDITY CHECK SYMBOL TABLE POINTER
;CALL IS:
;
; MOVX T,<PTR>
; PUSHJ P,CHKSYP
; ERROR
; NORMAL
;
;WHERE <PTR> IS THE [SYMBOL-TABLE] POINTER TO BE VALIDITY CHECKED
;TO MAKE SURE EACH PAGE REFERENCED IN THE POINTER EXITS, CAN BE READ,
;AND IS A PART OF THIS PROCESS (I.E., IS NOT SPYING ON MONITOR OR
;SOMETHING).
;
;ERROR RETURN IS TAKEN IF THE POINTER IS INVALID OTHERWISE THE NORMAL
;RETURN IS TAKEN.
;
;USES TT, TT1
CHKSYP: JUMPGE T,CPOPJ ;POINTER MUST BE .LT. 0
PUSHJ P,SAVRST ;NEED SOME ACS
HRRZ R,T ;GET BASE ADDRESS OF TABLE
HLRE S,T ;GET NEGATIVE LENGTH
MOVN S,S ;CONVERT TO POSITIVE LENGTH
IFN FTMON,<
SKIPE HSBLK ;WINDOWING SYMBOLS?
JRST CHKSY4 ;YES, CHECK DIFFERENTLY
> ;END IFN FTMON
HLL R,SECDDT ;SYMBOLS ARE IN DDT'S SECTION
XMOVEI T,SYBITS ;ADDRESS OF ROUTINE TO LOOK AT CHKADR RESULTS
PJRST CHKRNG ;CALL COMMON ROUTINE TO LOOK AT TABLE
IFN FTMON,<
;HERE IF SYMBOLS WINDOWING. MAP TABLE A PAGE AT A TIME, AND
;MANUALLY CALL CHKADR ON EACH PAGE WINDOWED. FAIL IF ANYTHING WRONG.
CHKSY4: ADD S,R ;PUT LAST ADDRESS INTO S
TRZ R,PAGMSK ;ROUND DOWN TO TOP OF PAGE
SUBI S,1 ;FIRST UNUSED TO LAST USED
TRZ S,PAGMSK ;START OF LAST PAGE
CHKSY6: MOVX TT,1B1 ;PASS SYWSET AN ADDRESS
PUSHJ P,SYWSET ;SET UP A WINDOW TO IT
MOVE T,R ;SAVE WHERE WE ARE
MOVE R,SYWIN ;POINT TO SYMBOL WINDOW
PUSHJ P,CHKADR ;GET ACCESS BITS
PUSHJ P,SYBITS ;CHECK THEM OUT
POPJ P, ;NO GOOD
MOVE R,T ;RESTORE CURRENT PLACE
ADDI R,PAGSIZ ;ADVANCE TO NEXT PAGE
CAMG R,S ;DONE YET?
JRST CHKSY6 ;NO, KEEP GOING
JRST CPOPJ1 ;ALL DONE, POINTER IS OK
> ;END IFN FTMON
;SYBITS -- CHECK A SINGLE SYMBOL TABLE PAGE
;CALL:
; MOVE TT,<CHKADR BITS>
; PUSHJ P,SYBITS
; BAD
; OK
;
;DESTROYS TT, USES NO OTHER ACS.
SYBITS: TXC TT,PG$REA!PG$EXI ;COMPLEMENT BITS THAT MUST BE OFF
TXNN TT,PG$REA!PG$EXI!PG$SPY!PG$ABZ ;PAGE LEGAL?
AOS (P) ;YES, SKIP RETURN
POPJ P, ;GIVE RETURN TO CALLER
;CHKRNG -- CHECK ACCESSIBILITY OF A RANGE OF ADDRESSES
;CALL:
; R/ FIRST ADDRESS TO CHECK
; S/ COUNT OF ADDRESSES
; T/ ROUTINE TO CALL TO DECIDE LEGALITY
; PUSHJ P,CHKRNG
; BAD
; OK
;
;ROUTINE IN T ALSO RETURNS NON-SKIP FOR BAD, SKIP FOR OK.
;DESTROYS R,S,T,TT,TT1,TT2
CHKRNG: ADD S,R ;PUT LAST ADDRESS IN S
TRZ R,PAGMSK ;START OF FIRST PAGE
SUBI S,1 ;MAKE LAST ADDRESS TO CHECK
TRZ S,PAGMSK ;START OF LAST PAGE TO CHECK
CHKRN2: PUSHJ P,CHKADR ;GET ACCESS BITS INTO TT
PUSHJ P,0(T) ;CHECK THE BITS
POPJ P, ;CALLER DOESN'T LIKE THEM
ADDI R,PAGSIZ ;ADVANCE TO NEXT PAGE
CAMG R,S ;ALL DONE?
JRST CHKRN2 ;NO, KEEP LOOPING
JRST CPOPJ1 ;YES, LIKED THEM ALL
;CHKADR -- CHECK ADDRESS ACCESSIBILITY
;CALL IS:
;
; MOVX R,<ADR>
; PUSHJ P,CHKADR
; RETURN
;
;WHERE <ADR> IS THE PHYSICAL ADDRESS TO BE CHECKED.
;
;RETURNS ACCESS BITS IN AC TT:
; PG$EXI - PAGE EXISTS
; PG$REA - PAGE CAN BE READ
; PG$WRT - PAGE CAN BE WRITTEN (I.E., MOVEM'ED TO)
; PG$HGH - PAGE IS PART OF [TOPS-10] HIGH SEGMENT
; PG$SPY - PAGE IS SPYING ON SOMEONE ELSE (MONITOR)
; PG$ABZ - PAGE IS ALLOCATED BUT ZERO
;
;USES TT1, ALL OTHER ACS PRESERVED.
IFE FTFILE,<
CHKADR: MOVE TT,R ;SCRATCH COPY OF ADDRESS
ANDCMI TT,PAGMSK ;REDUCE TO JUST PAGE ADDRESS
XOR TT,LASTPG ;COMPARE AGAINST LAST PAGE CHECKED
JUMPE TT,CHKAD7 ;SAME PAGE, ALREADY HAVE ACCESS BITS
XORB TT,LASTPG ;DIFFERENT PAGE, REMEMBER FOR NEXT CALLER
IFN FTEXEC,< ;EXEC IS DIFFERENT
SKPUSR ;SEE IF USER OR EXEC MODE
JRST CHKADX > ;EXEC, REQUIRES SPECIAL HANDLING
;STILL IFE FTFILE
IFN FTDEC10,< ;TOPS-10 STYLE
SKPNS0 ;IN NON-ZERO SECTION?
TLNN R,-1 ;NO, ADDRESS MUST BE .LT. 2**18
TLNE R,770000 ;MUST ALWAYS BE .LT. 2**30
JRST CHKAD4 ;NO WAY
MOVE TT,R ;ADDRESS
IORI TT,PAGMSK ;ROUND TO BOTTOM OF PAGE
CAMG TT,.JBREL ;PART OF CONTIGUOUS LOW SEG?
JRST CHKAD5 ;YES, THEN RESULTS A FORGONE CONCLUSION
LSH TT,WRD2PG ;PAGE NUMBER
TLNE TT,-1 ;HUGE PAGE NUMBER?
JRST CHKAD4 ;YES, NO WAY
HRLI TT,.PAGCA ;GET PAGE ACCESS BITS FUNCTION
PAGE. TT, ;ASK MONITOR
CAIA ;MAYBE A KA?
JRST CHKAD6 ;REMEMBER NEW BITS
TLNE TT,-1 ;PAGE. UNIMPLEMENTED?
SKIPN .JBHRL ;GOT A HISEG?
JRST CHKAD4 ;NO GO
PUSH P,T ;PRESERVE T OVER GETHSO
PUSHJ P,GETHSO ;FIND START OF HISEG
MOVE TT,R ;ADDRESS OF INTEREST
SUB TT,T ;OFFSET INTO HISEG
POP P,T ;ADJUST STACK
JUMPL TT,CHKAD4 ;NOT IN HISEG, NO ACCESS
HRRZ TT,.JBHRL ;TOP OF HISEG
CAIL TT,(R) ;ADDRESS IN R .LE. TOP OF HISEG?
JRST CHKAD4 ;NO, ADDRESS NOT IN HISEG
MOVX TT,PG$REA!PG$HGH ;ASSUME CAN READ
HRROI TT1,.GTSGN ;HISEG INFO
GETTAB TT1, ;ASK MONITOR
SETZ TT1, ;???
TXNE TT1,SN%SPY ;SPY-SEG?
TXO TT,PG$SPY ;YES, TELL WORLD
JRST CHKAD6 ;SET BITS
CHKAD4: SKIPA TT,[PG$EXI] ;NO ACCESS (PAGE DOES NOT EXIST)
CHKAD5: MOVX TT,<PG$REA!PG$WRT> ;FULL READ/WRITE ACCESS
CHKAD6: TXCA TT,PG$EXI ;PAGE. RETURNS COMPLIMENT OF EXISTENCE
CHKAD7: SKIPA TT,LASTAC ;GET ACCESS BITS FROM LAST CALL
CHKAD8: MOVEM TT,LASTAC ;SAVE ACCESS BITS FOR NEXT CALL
POPJ P, ;RETURN WITH BITS IN TT
> ;END OF IFN FTDEC10
;STILL IFE FTFILE
IFN FTDEC20,< ;TOPS-20 STYLE
SETZ TT, ;INITIALLY NO ACCESS
SKPNS0 ;IN NON-ZERO SECTION?
TLNN R,-1 ;NO, ADDRESS MUST BE .LT. 2**18
TLNE R,770000 ;ADDRESS MUST AWAYS BE .LT. 2**30
JRST CHKAD8 ;NO WAY
PUSHJ P,SAVR ;SAVE R OVER (M)RPACS%
MOVE T1,R ;GET ADDRESS
IFE FTMON,<
LSH T1,WRD2PG ;GET PAGE NUMBER
HRLI T1,.FHSLF
RPACS% ;READ PAGE ACCESS
> ;END IFE FTMON
IFN FTMON,<
MRPAC% ;READ MONITOR PAGE ACCESS
> ;END IFN FTMON
TXZ T2,PA%IND ;KEEP SDDT.EXE CHECKSUM CONSISTENT
TXNE T2,PG$WRT ;IS THE PAGE WRITEABLE?
TXO T2,PG$WRT ;YES, SET ALL BITS FOR BOOLEAN TESTS ELSEWHERE
SKIPN T2 ;DOES THE PAGE EXIST?
; (MRPAC% RETURNS PA%PRV ONLY FOR ILL PAGE)
TXO T2,PG$REA!PG$WRT ;NO, NON-EXISTENT PAGES ARE R/W'ABLE
MOVEM T2,LASTAC ;SAVE ACCESS
CHKAD7: SKIPA TT,LASTAC ;RETURN ACCESS IN TT
CHKAD8: MOVEM TT,LASTAC ;SAVE ACCESS BITS FOR NEXT CALLER
POPJ P,
> ;END IFN FTDEC20
;STILL IFE FTFILE
IFN FTEXEC,<
;HERE TO CHECK ADDRESS ACCESSIBILITY FOR EXEC MODE
CHKADX: PUSHJ P,CHKAEX ;SEE ABOUT THIS ADDRESS
TXNE TT,PG$EXI!PG$REA!PG$WRT ;DO WE KNOW ANYTHING ABOUT THE PAGE?
POPJ P, ;YES, RETURN
;NO ACCESS, ASSUME ADDRESS BREAK, SNIFF AROUND A LITTLE HARDER . . .
XORI R,1 ;A DIFFERENT ADDRESS IN THE SAME PAGE
PUSHJ P,CHKAEX ;CHECK OUT THE OTHER ADDRESS
; IF PREVIOUS FAILURE WAS DUE TO AN
; ADDRESS BREAK THEN THIS CALL WILL
; RETURN REAL PAGE ACCESS ABILITY. IF
; THE PAGE IS TRULY INACCESSIBLE THEN
; THAT WILL STILL BE REFLECTED IN THE
; ACCESS BITS RETURNED FROM CHKAEX HERE.
XORI R,1 ;RESTORE R FOR CALLER
POPJ P, ;AND RETURN WITH ACCESS CODE IN TT
;STILL IFE FTFILE AND IFN FTEXEC
;HERE TO DO THE REAL EXEC MODE ADDRESS ACCESSIBILITY GRUNDGE . . .
CHKAEX: MOVX TT,<PG$EXI!PG$REA!PG$WRT> ;ASSUME FULL ACCESS
;CHECK FOR KA-10
SKPKA ;ON A KA-10?
JRST CHKAE0 ;NO
CONO APR,1B23 ;CLEAR NXM FLAG
SKIP (R) ;SEE WHAT MEMORY SAYS
TLNN R,-1 ;MUST ALWAYS BE .LE. 777777
CONSZ APR,1B23 ;DID NXM FLAG SET?
SETZ TT, ;YES, NO ACCESS
MOVE TT1,SAVAPR ;GET APR CONI WORD
ANDI TT1,7 ;APR PI LEVEL
CONO APR,1B23(TT1) ;CLEAR NXM, RESTORE APR PI
JRST CHKAD8 ;RETURN WITH ACCESS BITS IN TT
;CHECK FOR KI-10
CHKAE0: SKPKI ;ON A KI-10?
JRST CHKAE2 ;NO
MAP TT1,(R) ;SEE WHAT PAGER THINKS ABOUT ADR
TRNE TT1,1B18 ;PAGE FAIL
TRNN TT1,1B22 ;WITH NO MATCH?
CAIA ;NO - ADR IS OK SO FAR
SETZ TT, ;YES, NO ACCESS
TRNN TT1,1B20!1B22 ;WRITE ACCESS OR NO MATCH (UNMAPPED)?
TXZ TT,PG$WRT ;NO, READ ONLY
JUMPE TT,CHKAD8 ;IF NO ACCESS DON'T BOTHER
CONO APR,1B29 ;CLEAR NXM FLAG
SKIP (R) ;SEE IF MEMORY RESPONDS
TLNN R,-1 ;MUST ALWAYS BE .LE. 777777
CONSZ APR,1B29 ;DID NXM SET?
SETZ TT, ;YES, NO ACCESS
MOVE TT1,SAVAPR ;GET APR CONI WORD
ANDI TT1,77 ;APR PI LEVEL(S)
CONO APR,1B29(TT1) ;CLEAR NXM, RESTORE APR PI LEVEL(S)
JRST CHKAD8 ;RETURN WITH ACCESS BITS IN TT
;STILL IFE FTFILE & IFN FTEXEC
;CHECK FOR KL-10
CHKAE2: SKPKLS ;ON A KL-10 OR A KS-10?
JRST CHKAE4 ;NO
PUSHJ P,OKPAG ;IS PAGING ENABLED?
JRST CHKAE3 ;NO, JUST CHECK FOR NXM
MAP TT1,(R) ;ASK PAGER'S OPINION
TXNN TT1,1B1 ;PAGE FAIL?
TXNN TT1,1B2 ;OR NO ACCESS ALLOWED?
SETZ TT, ;YES, NO ACCESS
SKPKIP ;KI-PAGING?
JRST .+3 ;NO (MUST BE KL-PAGING)
TXNN TT1,1B3 ;WRITE ACCESS?
TXZ TT,PG$WRT ;NO
SKPKLP ;KL-PAGING?
JRST .+3 ;NO (MUST HAVE BEEN KI-PAGING)
TXNN TT1,1B4 ;WRITE ACCESS?
TXZ TT,PG$WRT ;NO
JUMPE TT,CHKAD8 ;IF NO ACCESS DON'T BOTHER
CHKAE3: PUSHJ P,SAVT ;NEED ANOTHER AC
EXCH T,TT ;SAVE TT FOR MOMENT
PUSHJ P,GVUPT ;FIND VIRTUAL ADDRESS OF UPT
JRST [EXCH TT,T ;UPT NOT IN EXEC VIRTUAL ADDRESS SPACE
JRST CHKAD8] ;SO JUST TRY THE MEM REF AND SEE WHAT HAPPENS
PUSHJ P,SAVFL ;SAVE PC FLAGS OVER POSSIBLE PAGE FAULT
EXCH TT,T ;T:=ADDR OF UPT; TT:=ACCESS BITS
PUSH P,500(T) ;SAVE PAGE-FAIL WORD
PUSH P,501(T) ;PAGE-FAIL OLD PC//PAGE-FAIL OLD PC FLAGS
PUSH P,502(T) ;PAGE-FAIL NEW PC//PAGE-FAIL OLD PC
PUSH P,503(T) ;----------------//PAGE-FAIL NEW PC
; (NOTE CST WILL SHOW UPT MODIFIED)
XMOVEI TT1,KLNXM ;OUR VERY OWN PAGE-FAIL NEW PC
MOVEM TT1,502(T) ;SET FOR KI-PAGING
MOVEM TT1,503(T) ;SET FOR KL-PAGING
CONO APR,1B22!1B25!1B27 ;CLEAR NXM FLAG
SKIP (R) ;REFERENCE MEMORY
SKPNS0 ;RESTRICTED TO SECTION 0 ADDRESSING?
TLNN R,-1 ;YES, MUST BE .LE. 777777
CONSZ APR,1B25 ;DID NXM FLAG SET?
KLNXM: SETZ TT, ;YES, NO ACCESS
POP P,503(T) ;RESTORE
POP P,502(T) ; OLD
POP P,501(T) ; PAGE-FAIL
POP P,500(T) ; WORDS
MOVE TT1,SAVAPR ;APR CONI WORD
ANDI TT1,7 ;APR PI LEVEL
CONO APR,1B22!1B25!1B27(TT1) ;CLEAR NXM, RESTORE APR PI
JRST CHKAD8 ;RETURN WITH ACCESS BITS IN TT
;STILL IN IFN FTEXEC & IFE FTFILE
;UNKNOWN PROCESSOR
CHKAE4: HALT ERR ;UNKNOWN PROCESSOR TYPE
> ;END OF IFN FTEXEC
> ;END OF IFE FTFILE
;FILDDT CHKADR
;FOR FILDDT, CHKADR RETURNS THE FILE PAGE NUMBER THAT
;SHOULD BE READ IN TT1. THIS IS EITHER R SHIFTED RIGHT BY 9,
;OR, IF EXEFMT, THE APPROPRIATE FILE PAGE FROM THE EXE DIRECTORY.
IFN FTFILE,<
IFN FTDEC10,< ;TOPS-10 STYLE
CHKADR: MOVE TT1,R ;FILE WORD NUMBER
LSH TT1,WRD2PG ;FILE PAGE NUMBER
SETZ TT, ;INITIALLY NO ACCESS
SKIPE EXEFMT ;EXE OR DATA?
JRST CHKAEX ;EXE FORMAT
SKIPN FILING ;READING A FILE?
JRST CHKAD2 ;NO, GO RANGE CHECK MONITOR ADDRESS
CAMGE R,MAXSIZ ;IS ADDRESS BEFORE EOF?
TXO TT,PG$EXI!PG$REA ;YES, SET EXISTS AND READABLE
JRST CHKAE8 ;GO CHECK PATCHS TO SET PG$WRT
;MONITOR OR PHYSICAL MEMORY
CHKAD2: SKIPE MAPFN ;GOING TO DO A PHYSICAL PEEK/POKE?
CAMGE R,MAXSIZ ;YES, WITHIN PHYSICAL MEMORY?
TXOA TT,PG$EXI!PG$REA ;OK TO TRY FOR IT
POPJ P, ;OFF END OF MEMORY, GIVE ERR
JRST CHKAE8 ;GO CHECK WRITE ACCESS
;EXE FORMAT FILE
CHKAEX: CAMGE TT1,PGTLEN ;PAGE WITHIN REASON?
SKIPN TT1,@PAGTBL ;AND DOES IT EXIST?
POPJ P, ;NO TO ONE OF THE ABOVE
TXO TT,PG$EXI!PG$REA ;YES,
ANDX TT1,SV$FPN ;PHYSICAL FILE PAGE NUMBER
JUMPN TT1,CHKAE8 ;IF REAL PAGE SEE IF CAN WRITE
TXO TT,PG$ABZ ;ALLOCATED BUT ZERO PAGE
POPJ P, ;RETURN ACCESS BITS
CHKAE8: SKIPE PATCHS ;PATCHING ENABLED?
TXO TT,PG$WRT ;YES, THEN CAN ALSO WRITE
POPJ P, ;RETURN ACCESS BITS
> ;END OF IFN FTDEC10
;STILL IFN FTFILE
IFN FTDEC20,< ;TOPS-20 STYLE
CHKADR: SETZ TT, ;INITIALLY NO ACCESS
MOVE TT1,R ;FILE WORD NUMBER
LSH TT1,WRD2PG ;FILE PAGE NUMBER
XOR TT1,LASTPG ;SEE IF WE ALREADY KNOW THE ACCESS
JUMPE TT1,CHKAD7 ;YES, GO FETCH IT
XORB TT1,LASTPG ;NO, SET LASTPG FOR NEXT TIME
JUMPL R,CHKAD8 ;FORGET NEGATIVE ADDRESSES
CAML R,MAXSIZ ;BEFORE END OF DISK OR FILE?
JRST CHKAD8 ;NO
SKIPN PHYSIO ;PHYSICAL I/O?
JRST CHKAD1 ;NO, CHECK /D OR EXE FORMAT
MOVX TT,PG$EXI!PG$REA ;YES, EXISTS AND IS READABLE
JRST CHKAD5 ;GO CHECK PATCHS FOR WRITE ACCESS
CHKAD1: SKIPN EXEFMT ;EXE OR DATA FORMAT?
JRST CHKAD2 ;DATA, NO MAPPING NEEDED
CAMGE TT1,PGTLEN ;EXE, PAGE # WITHIN REASON?
SKIPN TT1,@PAGTBL ;AND DOES PAGE EXIST?
JRST CHKAD8 ;NO TO ONE OF THE ABOVE
ANDX TT1,SV$FPN ;REDUCE TO PHYSICAL FILE PAGE NUMBER
JUMPN TT1,CHKAD2 ;AND CHECK ACCESS
MOVX TT,PG$EXI!PG$REA!PG$ABZ ;ALLOCATED BUT ZERO
JRST CHKAD5 ;GO SEE IF WE CAN WRITE
CHKAD2: PUSHJ P,SAVR ;SAVE R OVER RPACS%
MOVE T1,TT1 ;FILE PAGE NUMBER
HRL T1,FILJFN ;JFN FOR FILE
RPACS% ;GET ACCESS BITS
MOVE TT,T2 ;PUT ACCESS IN RIGHT PLACE
;HERE WITH MONITOR'S ACCESS IN TT. MODIFY WRITE ACCORDING TO PATCHS.
CHKAD5: SKIPE PATCHS ;PATCHING?
TXOA TT,PG$WRT ;YES, ALLOW WRITES
TXZ TT,PG$WRT ;NO, DON'T ALLOW THEM
CHKAD8: MOVEM TT,LASTAC ;SAVE FOR NEXT CALL
MOVEM TT1,LSTNPG ;SAVE TRANSLATED PAGE NUMBER
POPJ P, ;RETURN
CHKAD7: MOVE TT,LASTAC ;RETURN PAGE ACCESS BITS
MOVE TT1,LSTNPG ;AND PAGE NUMBER
POPJ P, ;RETURN WITH BITS IN TT
> ;END OF IFN FTDEC20
> ;END OF IFN FTFILE
SUBTTL MEMORY MANAGEMENT ROUTINES -- MISCELLANEOUS
;GETHSO -- RETURN ORIGIN OF HIGH SEGMENT
;CALL IS:
;
; PUSHJ P,GETHSO
; RETURN
;
;ON RETURN AC T IS EITHER 0 IF THERE IS NO HIGH SEGMENT OR IS
;THE START OF THE HIGH SEGMENT IN THE USER VIRTUAL ADDRESS SPACE.
IFE FTFILE,< ;FIRST NON-FILDDT CASES
GETHSO: SETZ T, ;ASSUME NO HISEG
IFN FTEXEC,< ;EXEC MODE HAS NO HIGH SEG
SKPUSR ;USER OR EXEC MODE?
POPJ P, > ;EXEC, NO HIGH SEG TO SPEAK OF
PUSHJ P,SAVR ;SAVE R TO POINT TO .JBHRL
MOVEI R,.JBHRL ;HIGH SEG ORIGIN WORD
PUSHJ P,FETCH ;GET IT
SETZ T, ;ASSUME NO HIGH SEG
TRNN T,-1 ;HIGH SEG EXIST?
JRST [SETZ T, ;NO, SO INDICATE
POPJ P,] ;RETURN TO CALLER
IFN FTDEC10,< ;TOPS-10 CASE
MOVE T,[-2,,.GTUPM] ;GETTAB CODE TO
GETTAB T, ;OBTAIN HISEG ORIGIN
JRST GETHSQ ;FAILED - ASSUME KA
HLRZ T,T ;PUT IN RH
ANDI T,777000 ;CLEAR GARBAGE
POPJ P, ;RETURN
GETHSQ: MOVEI T,377777 ;DEFAULT ORIGIN-1
CAMG T,.JBREL ;HUGE LOWSEG?
MOVE T,.JBREL ;YES
ADDI T,1 ;BUMP TO START AT HIGHSEG
POPJ P, ;RETURN
> ;END OF IFN FTDEC10
IFN FTDEC20,<
MOVEI R,.JBHSO ;NOW FETCH ORIGIN WORD
PUSHJ P,FETCH ;SHOULD BE SET UP BY LINK-20
SETZ T, ;??
SKIPN T ;SET UP?
MOVEI T,400 ;DEFAULT ORIGIN
LSH T,PG2WRD ;CONVERT TO ADDRESS
POPJ P, ;RETURN
> ;END OF IFN FTDEC20
> ;END OF IFE FTFILE
;FILDDT GETHSO
IFN FTFILE,<
GETHSO: MOVE T,JOBHSO ;GET LOWEST HISEG ADDR, IF ANY
IFN FTDEC20,<
JUMPN T,CPOPJ ;RETURN IF FOUND IT
PUSHJ P,SAVR ;NO, TRY FOR .JBHSO; SAVE R
MOVEI R,.JBHSO ;POINT TO HI SEG ORIGIN WORD
SKIPE EXEFMT ;ONLY IF EXE FORMAT
PUSHJ P,FETCHP ;GET THE DATA
SETZ T, ;NOT THERE
LSH T,PG2WRD ;FORM BASE ADDRESS
> ;END IFN FTDEC20
POPJ P, ;RETURN
> ;END OF IFN FTFILE
IFN FTEXEC,<
;OKPAG -- SEE IF PAGING IS TURNED ON FOR PHYSICAL ADDRESSING
;CALL IS:
;
; PUSHJ P,OKPAG
; ERROR RETURN
; NORMAL RETURN
;
;THE ERROR RETURN IS TAKEN IF PAGING IS NOT CURRENTLY ENABLED (E.G.,
;IF RUNING ON A KA-10 OR A KL-10 BEFORE THE MONITOR HAS STARTED AND
;ENABLED PAGING), OTHERWISE THE NORMAL RETURN IS TAKEN INDICATING
;THAT PAGING IS ENABLED (SO THAT, FOR EXAMPLE, THE PHYSICAL ADDRES-
;SING CODE CAN DIDDLE THE PAGE MAP).
;
;USES NO ACS
OKPAG: SKPNKA ;ON A KA-10?
POPJ P, ;YES, ALWAYS FAILURE
;SEE IF A KI-10
SKPKI ;ON A KI-10?
JRST OKPAG2 ;NO
JRST CPOPJ1 ;YES, PAGING ALWAYS ON
;TRY FOR A KL-10 OR A KS-10
OKPAG2: SKPKLS ;ON A KL-10 OR A KS-10?
JRST OKPAG4 ;NO
PUSH P,T ;NEED A SCRATCH AC
CONI PAG,T ;(CONSZ PAG, FAILS ON KS-10)
TXNE T,1B22 ;IS PAGING (ET AL) ENABLED?
AOS -1(P) ;YES - INDICATE WITH SKIP RETURN
POP P,T ;RESTORE T
POPJ P, ;TELL USER
;UNKNOWN PROCESSOR TYPE
OKPAG4: HALT ERR ;UNKNOWN PROCESSOR TYPE
> ;END OF IFN FTEXEC
;GV??? -- ROUTINES TO GET THE EXEC VIRTUAL ADDRESS OF THE EPT/UPT/CST/SPT
;CALL:
; PUSHJ P,GV???
; NOT IN ADDRESS SPACE
; OK RETURN
;
;ON A SUCCESSFUL RETURN, THE BASE ADDRESS OF THE SPECIFIED TABLE IS
;RETURNED IN AC TT.
;
;PRESERVES ALL ACS.
GVEPT:
IFN FTEXEC,<
PUSHJ P,FNDPAG ;MAKE SURE PAGING DATA KNOWN
> ;END OF IFN FTEXEC
SKIPL TT,EPTWRD ;GET BASE ADDR, SKIP IF NOT IN ADDR SPACE
AOS (P) ;IT'S THERE, SKIP RETURN
POPJ P, ;RETURN
GVUPT:
IFN FTEXEC,<
PUSHJ P,FNDPAG ;MAKE SURE PAGING DATA KNOWN
> ;END OF IFN FTEXEC
SKIPL TT,UPTWRD ;GET BASE ADDR, SKIP IF NOT IN ADDR SPACE
AOS (P) ;IT'S THERE, SKIP RETURN
POPJ P, ;RETURN
GVCST:
IFN FTEXEC,<
PUSHJ P,FNDPAG ;MAKE SURE PAGING DATA KNOWN
> ;END OF IFN FTEXEC
SKIPL TT,CSTWRD ;GET BASE ADDR, SKIP IF NOT IN ADDR SPACE
AOS (P) ;IT'S THERE, SKIP RETURN
POPJ P, ;RETURN
GVSPT:
IFN FTEXEC,<
PUSHJ P,FNDPAG ;MAKE SURE PAGING DATA KNOWN
> ;END OF IFN FTEXEC
SKIPL TT,SPTWRD ;GET BASE ADDR, SKIP IF NOT IN ADDR SPACE
AOS (P) ;IT'S THERE, SKIP RETURN
POPJ P, ;RETURN
IFE FTFILE,<
IFN FTEXEC,<
;FNDPAG -- ROUTINE TO FIND THE VIRTUAL ADDRESSES OF ALL THE PAGING TABLES
;CALL:
; PUSHJ P,FNDPAG
; RETURN
;
;ON RETURN, THE ???WRD'S ARE SET TO THE BASE ADDRESS OF THE CORRESPONDING
;TABLE, OR -1 IF THE TABLE IS NOT IN THE EXEC ADDRESS SPACE.
;
;DESTROYS ONLY TT.
FNDPAG: SKIPN PAGVAL ;ALREADY BEEN HERE?
SKPEXC ;OR IN USER MODE?
POPJ P, ;YES, CAN'T DO THIS
PUSHJ P,FVEPT ;FIND THE EPT
SETO TT, ;NOT THERE
MOVEM TT,EPTWRD ;STORE THE ADDRESS
PUSHJ P,FVUPT ;FIND THE UPT
SETO TT, ;NOT THERE
MOVEM TT,UPTWRD ;STORE THE ADDRESS
PUSHJ P,FVCST ;FIND THE CST
SETO TT, ;NOT THERE
MOVEM TT,CSTWRD ;STORE THE ADDRESS
PUSHJ P,FVSPT ;FIND THE SPT
SETO TT, ;NOT THERE
MOVEM TT,SPTWRD ;STORE THE ADDRESS
SETOM PAGVAL ;THE ???WRD'S ARE VALID
POPJ P, ;RETURN
> ;END OF IFN FTEXEC
> ;END OF IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;FVEPT -- GET EXEC VIRTUAL ADDRESS OF EPT
;CALL IS:
;
; PUSHJ P,FVEPT
; ERROR RETURN
; NORMAL RETURN
;
;THE ERROR RETURN IS TAKEN IF THERE IS NO EPT (E.G., IF ON A KA-10)
;OTHERWISE THE EXEC VIRTUAL ADDRESS OF THE HARDWARE EPT IS
;RETURNED IN AC TT.
;
;PRESERVES ALL ACS.
FVEPT: SKPNKA ;ON A KA-10?
POPJ P, ;YES, NO EPT
;SEE IF ON A KI-10
SKPKI ;ON A KI-10?
JRST FVEPT2 ;NO
DATAI PAG,TT ;YES, READ IN UPT/EPT
JRST FVEPT3 ;AND TRANSLATE INTO VIRTUAL ADDRESS
;CHECK FOR A KL-10 OR A KS-10
FVEPT2: SKPKLS ;ON A KL-10 OR A KS-10?
JRST FVEPT4 ;NO
CONI PAG,TT ;READ KL EPT
FVEPT3: ANDI TT,17777 ;REDUCE TO MAX PHYSICAL PAGE NUMBER
PUSHJ P,FPVPG ;TRANSLATE INTO VIRTUAL PAGE NUMBER
POPJ P, ;CAN'T, ERROR
LSH TT,PG2WRD ;MAKE INTO VIRTUAL WORD ADDRESS
JRST CPOPJ1 ;TAKE SUCCESSFUL RETURN
;UNKNOWN PROCESSOR TYPE
FVEPT4: HALT CPOPJ ;DIE
> ;END IFN FTEXEC
> ;END OF IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;FVUPT -- GET EXEC VIRTUAL ADDRESS OF UPT
;CALL IS:
;
; PUSHJ P,FVUPT
; ERROR RETURN
; NORMAL RETURN
;
;THE ERROR RETURN IS TAKEN IF THERE IS NO UPT (E.G., IF ON A KA-10)
;OTHERWISE THE EXEC VIRTUAL ADDRESS OF THE HARDWARE UPT IS
;RETURNED IN AC TT.
;
;PRESERVES ALL ACS.
FVUPT: SKPNKA ;ON A KA-10?
POPJ P, ;YES, NO UPT
;SEE IF ON A KI-10
SKPKI ;ON A KI-10?
JRST FVUPT2 ;NO
DATAI PAG,TT ;YES, READ IN UPT/EPT
MOVS TT,TT ;PUT UPT IN RIGHT HALF
JRST FVUPT3 ;AND TRANSLATE INTO VIRTUAL ADDRESS
;CHECK FOR A KL-10 OR A KS-10
FVUPT2: SKPKLS ;ON A KL-10 OR A KS-10?
JRST FVUPT4 ;NO
DATAI PAG,TT ;READ KL UPT
FVUPT3: ANDI TT,17777 ;REDUCE TO MAX PHYSICAL PAGE NUMBER
PUSHJ P,FPVPG ;TRANSLATE INTO VIRTUAL PAGE NUMBER
POPJ P, ;CAN'T, ERROR
LSH TT,PG2WRD ;MAKE INTO VIRTUAL WORD ADDRESS
JRST CPOPJ1 ;TAKE SUCCESSFUL RETURN
;UNKNOWN PROCESSOR TYPE
FVUPT4: HALT CPOPJ ;DIE
> ;END IFN FTEXEC
> ;END OF IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;FVCST -- FIND EXEC VIRTUAL ADDRESS OF CST BASE
;FVSPT -- FIND EXEC VIRTUAL ADDRESS OF SPT BASE
;CALL IS:
;
; PUSHJ P,FVCST/FVSPT
; ERROR RETURN
; NORMAL RETURN
;
;THE ERROR RETURN IS TAKEN IF THE HARDWARE BASE OF THE CST OR SPT
;(AS APPROPRIATE) IS INACCESSIBLE FROM EXEC VIRTUAL ADDRESS SPACE.
;
;THE NORMAL RETURN IS TAKEN WITH THE EXEC VIRTUAL ADDRESS OF THE
;BASE OF THE CST OR SPT (AS APPROPRIATE) IN REGISTER TT.
;
;PRESERVES ALL ACS.
FVCST: SKIPA TT,[MOVEM 2,FVTEM3] ;FLAG CST READ
FVSPT: MOVE TT,[MOVEM 3,FVTEM3] ;FLAG SPT READ
MOVEM TT,FVTEM1 ;SAVE CST/SPT FLAG
SKPKLP ;KL PAGING IN EFFECT?
POPJ P, ;NO, NO CST/SPT THEN
SKPKL ;ON A KL-10?
JRST FVSPT4 ;NO
PUSHJ P,SAVT ;NEED ANOTHER T
DATAI PAG,TT ;READ CURRENT AC BLOCK SELECTION
TXO TT,1B0 ;SET TO SELECT NEW AC BLOCKS
TXZ TT,1B1!1B2 ;AND NOTHING ELSE
MOVEM TT,FVTEM2 ;SAVE IN NON-REGISTER
DATAO PAG,[1B0+6B8] ;SWITCH TO AC BLOCK 6
XCT FVTEM1 ;READ CST/SPT BASE
DATAO PAG,FVTEM2 ;SWITCH BACK TO OLD ACS
JRST FVSPT9 ;TRANSLATE TO VIRTUAL ADDRESS
;CONTINUED ON NEXT PAGE
;STILL IN FTEXEC AND FTFILE
;CONTINUED FROM PREVIOUS PAGE
FVSPT4: SKPKS ;ON A KS-10?
HALT ERR ;NO???
PUSHJ P,SAVT ;NEED ANOTHER AC
LDB T,[POINT 4,FVTEM1,12] ;AC FIELD FROM FVCST0/FVSPT0
CAIN T,2 ;T = 2??
RDCSB FVTEM3 ;YES - CST BASE ADDRESS
CAIN T,3 ;T = 3??
RDSPB FVTEM3 ;YES - SPT BASE ADDRESS
FVSPT9: MOVE TT,FVTEM3 ;RETRIEVE DESIRED BASE ADDRESS
MOVEI T,PAGMSK ;WORD-WITHIN-PAGE MASK
AND T,TT ;GET WORD OFFSET WITHIN PAGE
LSH TT,WRD2PG ;PHY PAGE OF BASE OF CST/SPT
PUSHJ P,FPVPG ;FIND CORRESPONDING VIRTUAL ADDRESS
POPJ P, ;NOT MAPPED, DIE
LSH TT,PG2WRD ;VIRTUAL WORD ADDRESS OF BASE PAGE
ADD TT,T ;VIRTUAL ADRESS OF BASE OF CST/SPT
JRST CPOPJ1 ;SUCCESSFUL RETURN
> ;END IFN FTEXEC
> ;END IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;FPVPG -- FIND PHYSICAL TO VIRTUAL PAGE CORRESPONDENCE
;CALL IS:
;
; MOVX TT,<PAGE NUMBER>
; PUSHJ P,FPVPG
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <PAGE NUMBER> IS THE PHYSICAL MEMORY PAGE NUMBER (E.G., THE
;EPT) FOR WHICH AN EXEC VIRTUAL PAGE NUMBER IS DESIRED.
;
;THE ERROR RETURN IS TAKEN IF THE SPECIFIED PHYSICAL PAGE NUMBER IS
;NOT MAPPED INTO THE EXEC VIRTUAL ADDRESS SPACE.
;
;THE NORMAL RETURN IS TAKEN WITH REGISTER TT CONTAINING THE EXEC VIRTUAL
;PAGE NUMBER WHICH IS MAPPED INTO THE SPECIFIED PHYSICAL PAGE.
;
;PRESERVES ALL ACS.
FPVPG: SKPKA ;KA-10?
PUSHJ P,OKPAG ;NO, ON A MAPPING MACHINE, PAGING ON?
JRST CPOPJ1 ;VIRTUAL AND PHYSICAL EQUIVILENT
PUSH P,TT1 ;SAVE SOME ACS
PUSH P,TT2 ; . . .
SKPNKI ;KI-10?
JRST FPVP10 ;YES
SKPKLS ;KL-10 OR A KS-10?
CAIA ;NO
JRST FPVP20 ;YES
HALT CPOPJ ;UNKNOWN PROCESSOR TYPE
;STILL IN IFE FTFILE & IFN FTEXEC
;HANDLE KI-10 PAGING
FPVP10: MOVEI TT1,777777 ;MAX VIRTUAL ADDRESS ON KI-10
PUSH P,TT1 ;SAVE UPPER LIMIT
MOVEI TT1,777 ;STARTING POINT
FPVP12: MAP TT2,0(TT1) ;MAP VIRTUAL ADDRESS
TXNE TT2,1B18 ;PAGE BOX PAGE FAILURE?
JRST FPVP16 ;YES, FORGET THIS VIRTUAL PAGE
ANDI TT2,17777 ;NO, REDUCE TO JUST PAGE NUMBER
CAME TT2,TT ;THIS THE DESIRED PAGE?
JRST FPVP16 ;NO
FPVP14: MOVE TT,TT1 ;YES, EXEC VIRTUAL ADDRESS
LSH TT,WRD2PG ;MAKE INTO PAGE ADDRESS
AOS -3(P) ;TAKE SUCCESSFUL RETURN
JRST FPVP18 ;GO RETURN
FPVP16: ADDI TT1,PAGSIZ ;NEXT VIRTUAL PAGE
CAMG TT1,0(P) ;PASSED MAXIMUM ADDRESS YET?
JRST FPVP12 ;NOT YET
FPVP18: POP P,TT2 ;POP GARBAGE WORD
POP P,TT2 ;RESTORE TT2
POP P,TT1 ;RESTORE TT1
POPJ P, ;RETURN AS APPROPRIATE
;HANDLE KL-10 OR KS-10
FPVP20: XMOVEI TT1,777777 ;MAX KL ADDRESS WITHIN SECTION
TXNE TT1,37B17 ;IN NON-ZERO SECTION?
TXO TT1,37B17 ;YES THEN 37 SECTION LIMIT
PUSH P,TT1 ;SAVE UPPER LIMIT
MOVEI TT1,777 ;START AT PAGE 0
FPVP22: MAP TT2,@TT1 ;MAP EXEC VIRTUAL ADDRESS
TXNN TT2,1B1 ;PAGE FAIL?
TXNN TT2,1B2 ;ACCESSIBLE?
JRST FPVP26 ;NO
LSH TT2,WRD2PG ;YES, MAKE INTO PAGE NUMBER
ANDI TT2,17777 ;AND NUTHING BUT PAGE NUMBER
CAMN TT2,TT ;THIS THE DESIRED PHYSICAL PAGE?
JRST FPVP14 ;YES
FPVP26: ADDI TT1,PAGSIZ ;ADVANCE TO NEXT PAGE
CAMG TT1,0(P) ;REACHED LIMIT YET?
JRST FPVP22 ;NOT YET
JRST FPVP18 ;YES, ERROR RETURN - NOT MAPPED
> ;END IFN FTEXEC
> ;END IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;CLRAM -- CLEAR THE [PAGING] ASSOCIATIVE MEMORY
;CALL IS:
;
; PUSHJ P,CLRAM
; RETURN
;
;ON RETURN THE ASSOCIATIVE MEMORY FOR THE PAGING SYSTEM HAS BEEN
;RESET (CLEARED).
;
;USES TT1, ALL OTHER ACS PRESERVED
CLRAM: SETOM LASTPG ;FORGET LAST PAGE ACCESS
SKPNKA ;ON A KA?
POPJ P, ;ABOUT AS EASY AS THEY COME
;LOOK FOR A KI-10
SKPKI ;ON A KI-10?
JRST CLRAM2 ;NO
DATAI PAG,TT1 ;GET CURRENT EPT
TRO TT1,400000 ;SET AS NEW EPT
DATAO PAG,TT1 ;CLEARING THE ASSOCIATIVE MEMORY
POPJ P, ;DONE
;LOOK FOR A KL-10 OR A KS-10
CLRAM2: SKPKLS ;ON A KL-10 OR A KS-10?
JRST CLRAM4 ;NO
CONI PAG,TT1 ;GET EPT
IORI TT1,600000 ;JUICY BITS
CONO PAG,(TT1) ;CLEAR "ASSOCIATIVE" MEMORY
POPJ P, ;RETURN
;UNKNOWN PROCESSOR TYPE
CLRAM4: HALT ERR ;DIE
> ;END IFN FTEXEC
> ;END IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;SELAC -- SELECT DIFFERENT AC BLOCK
;CALL IS:
;
; MOVX W2,<ACBLK>
; PUSHJ P,SELAC
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <ACBLK> IS THE AC BLOCK NUMBER DESIRED.
;
;THE ERROR RETURN IS TAKEN IF THE AC BLOCK NUMBER IS OUT OF RANGE
;OR IF RUNNING ON A KA-10 OR KI-10; OTHERWISE THE NORMAL RETURN
;IS TAKEN WITH AC0 TO AC0+17 LOADED WITH THE NEW ACS AND DDT'S
;ACS LOADED IN THE NEW HARDWARE AC BLOCK. IF PHYSICAL ADDRESSING
;IS CURRENTLY ENABLED THEN VIRTUAL ADDRESSING IS RE-ESTABLISHED.
;
;USES W1 AND W2.
SELAC: SKPKA ;ON A KA-10?
SKPNKI ;OR A KI-10?
POPJ P, ;YES, LOSES
;LOOK FOR A KL-10 OR A KS-10 PROCESSOR
SKPKLS ;ON A KL-10 OR A KS-10?
JRST SELAC4 ;NO
CAILE W2,7 ;MUST BE 0 .LE. <ACBLK> .LE. 7
POPJ P, ;ILLEGAL AC BLOCK NUMBER
LSH W2,<^D35-^D8> ;POSITION FOR DATAO
DATAI PAG,W1 ;READ CURRENT AC BLOCK NUMBER
TXO W1,1B0 ;FLAG TO SET AC BLOCK
TXZ W1,1B1!1B2 ;BUT NOTHING ELSE (UPT, ETC)
SKIPN ACWRD ;BEEN HERE BEFORE?
MOVEM W1,ACWRD ;NO, REMEMBER ORIGINAL AC BLOCK
TXZ W1,7B8 ;CLEAR OUT CURRENT AC BLOCK FIELD
IOR W1,W2 ;SET NEW CURRENT AC BLOCK FIELD
MOVEM W1,TEM ;SAVE AWAY WHERE WE CAN FIND IT AGAIN
JSR SWAP ;RESTORE ACS TO HARDWARE AC BLOCK
DATAO PAG,TEM ;SELECT NEW AC BLOCK
JRST SELAC9 ;CLEAN UP AND RETURN
;STILL IFE FTFILE & IFN FTEXEC
;UNKNOWN PROCESSOR TYPE
SELAC4: HALT ERR ;UNKNOWN PROCESSOR TYPE
;COMMON EXIT FROM SELAC
SELAC9: JSR SWAP ;RESTORE DDT ACS
SETOM FAKEAC ;FLAG AGAIN USING FAKE ACS
SKIPGE MAPFN ;VIRTUAL ADDRESSING?
SETZM MAPFN ;PHYSICAL - RESET TO VIRTUAL
JRST RET ;ALL DONE
> ;END OF IFN FTEXEC
> ;END OF IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;RSTAC -- RESTORE AC BLOCK CONTEXT TO PRE-DDT ENTRY
;CALL IS:
;
; PUSHJ P,RSTAC
; RETURN
;
;IF NO $$U COMMAND HAS BEEN ISSUED OR IF USER MODE THEN SIMPLY
;SO NOTHING AND RETURN, ELSE RESTORE MACHINE TO AC BLOCK IN USE
;PREVIOUS TO THE FIRST $$NU COMMAND ISSUED SINCE LAST DDT ENTRY
;(E.G., FROM A BREAKPOINT). CALLED FROM $G, $P, AND $X COMMANDS.
;
;PRESERVES ALL [DDT] ACS
RSTAC: SKIPE ACWRD ;HAS USER $$NU'ED?
SKPEXC ;WHILE IN EXEC MODE?
POPJ P, ;NO, JUST RETURN HARMLESSLY
SKPKA ;YES, ON A KA-10?
SKPNKI ;OR A KI-10?
POPJ P, ;YES (SHOULD NEVER GET HERE)
;HANDLE KL-10 OR A KS-10 PROCESSOR
SKPKLS ;ON A KL-10 OR A KS-10 PROCESSOR?
JRST RSTAC4 ;NO
JSR SWAP ;RESTORE HARDWARE ACS
DATAO PAG,ACWRD ;RETURN TO PRE-DDT AC BLOCK
JRST RSTAC9 ;COMMON EXIT CODE
;UNKNOWN PROCESSOR
RSTAC4: HALT ERR ;UNKNOWN PROCESSOR
;COMMON EXIT FROM RSTAC
RSTAC9: JSR SWAP ;RESTORE DDT ACS
SETZM ACWRD ;FLAG WE'VE DONE WHAT WE JUST DID
POPJ P, ;AND RETURN
> ;END OF IFN FTEXEC
> ;END OF IFE FTFILE
IFN FTEXEC,<
;DOXBLT -- SUBROUTINE TO DO A BLT OR AN XBLT
;CALL:
; TT/ COUNT
; TT1/ FIRST SOURCE
; TT2/ FIRST DEST
; PUSHJ P,DOXBLT
; ERROR
; OK
;
;ASSUMES ADDRESSES ARE LEGAL, FAILS ONLY IF CAN'T GET TO THEM
;BECAUSE THEY ARE IN NON-ZERO SECTION AND DDT ISN'T.
;DESTROYS TT,TT1,TT2.
DOXBLT: SKPNS0 ;XBLT AVAILABLE?
JRST DOXBL2 ;NO, GO USE BLT IF POSSIBLE
EXTEND TT,[XBLT] ;COPY THE DATA
JRST CPOPJ1 ;DONE
;HERE TO TRY USING A BLT, IF EVERYTHING IS IN SECTION 0.
DOXBL2: JUMPLE TT,CPOPJ ;BACKWARDS BLTS DON'T WORK
TLNN TT1,-1 ;SOURCE IN 0?
TLNE TT2,-1 ;DEST IN 0?
POPJ P, ;SOMETHING NOT IN SECTION 0
ADD TT,TT2 ;FORM LAST+1 IN TT
SUBI TT,1 ;GET LAST
TLNE TT,-1 ;CROSS SECTION 0 END?
POPJ P, ;YES, ERROR
HRL TT2,TT1 ;SOURCE,,DEST
BLT TT2,(TT) ;COPY THE DATA
JRST CPOPJ1 ;ALL DONE
> ;END IFN FTEXEC
SUBTTL PRESERVATION ROUTINES
;SAVR -- PRESERVE "R"
SAVR: PUSH P,R ;SAVE R ON STACK
PUSHJ P,@-1(P) ;"RETURN" TO CALLER
SOS -2(P) ;NON-SKIP RETURN
POP P,R ;RESTORE REGISTER
POP P,(P) ;CLEAN UP STACK
AOS (P) ;SKIP RETURN (UNLESS SOS'ED ABOVE)
POPJ P, ;RETURN WITH PRESERVED R
;SAVT -- PRESERVE "T"
SAVT: PUSH P,T ;SAVE T ON STACK
PUSHJ P,@-1(P) ;"RETURN" TO CALLER
SOS -2(P) ;NON-SKIP RETURN
POP P,T ;RESTORE T
POP P,(P) ;CLEAN UP STACK
AOS (P) ;SKIP RETURN (UNLESS SOS'ED ABOVE)
POPJ P, ;RETURN WITH PRESERVED R
;SAVRST -- PRESERVE "R", "S", "T"
SAVRST: PUSH P,R ;SAVE R ON STACK
PUSH P,S ;SAVE S ON STACK
PUSH P,T ;SAVE T ON STACK
PUSHJ P,@-3(P) ;"RETURN" TO CALLER
SOS -4(P) ;NON-SKIP RETURN
POP P,T ;RESTORE T
POP P,S ;RESTORE S
POP P,R ;RESTORE R
POP P,(P) ;DUMP JUNK
AOS (P) ;SKIP RETURN (UNLESS SOS'ED ABOVE)
POPJ P, ;RETURN WITH PRESERVED R, S, AND T
IFN FTDEC20,< ;T1 - T4 ONLY FOR TOPS-20
;SAVT4 -- PRESERVE "T1", "T2", "T3", "T4"
SAVT4: PUSH P,T1 ;SAVE T1 ON STACK
PUSH P,T2 ;SAVE T2 ON STACK
PUSH P,T3 ;SAVE T3 ON STACK
PUSH P,T4 ;SAVE T4 ON STACK
PUSHJ P,@-4(P) ;"RETURN" TO CALLER
SOS -5(P) ;NON-SKIP RETURN
POP P,T4 ;RESTORE T4
POP P,T3 ;RESTORE T3
POP P,T2 ;RESTORE T2
POP P,T1 ;RESTORE T1
POP P,(P) ;DUMP JUNK
AOS (P) ;SKIP RETURN (UNLESS SOS'ED ABOVE)
POPJ P, ;RETURN WITH PRESERVED T1, T2, T3, AND T4
> ;END OF IFN FTDEC20
IFN FTEXEC,<
;SAVFL -- PRESERVE PC FLAGS
SAVFL: PUSH P,T ;NEED A TEMP AC
JSP T,.+1 ;GET SECTION 0 FLAGS
EXCH T,0(P) ;SAVE FLAGS, RESTORE T
SKPS0 ;DID WE PUT ANY FLAGS ON THE STACK?
XSFM 0(P) ;NO, PUT THEM THERE
PUSHJ P,@-1(P) ;CALL CALLER
SOS -2(P) ;NON-SKIP RETURN
EXCH T,0(P) ;TEMP AC AGAIN
MOVEM T,SATEM1 ;STORE FLAGS FOR (X)JRSTF
XMOVEI T,SAVFL8 ;WHERE THE JRST SHOULD GO
SKPNS0 ;WANT FLAGS IN SAME WORD?
HLL T,SATEM1 ;YES
MOVEM T,SATEM2 ;STORE PC OR FLAGS,,PC
SKPNS0 ;WHICH JRSTF TO DO?
JRSTF @SATEM2 ;OLD STYLE
XJRSTF SATEM1 ;NEW
SAVFL8: POP P,T ;RESTORE TEMP AC
POP P,0(P) ;DUMP JUNK RETURN ADDRESS
JRST CPOPJ1 ;RETURN TO CALLER'S CALLER
> ;END IFN FTEXEC
SUBTTL TELETYPE IO LOGIC -- DEFINITIONS
IFN FTEXEC,<
;KL10 TELETYPE I/O DEFINITIONS (DTE AND PROTOCOLS)
DTE==200
DTEII=142 ;DTE20 INTERRUPT INST
DTEUNS=143 ;UNUSED
DTEEPW=144 ;EXAMINE PROTECTION WORD
DTEERW=145 ;EXAMINE RELOCATION WORD
DTEDPW=146 ;DEPOSIT PROTECTION WORD
DTEDRW=147 ;DEPOSIT RELOCATION WORD
DTEFLG=444
DTEF11=450
DTECMD=451
DTEMTD=455
DTEMTI=456
.DTMTO==10B27
.DTMMC==11B27
.DTNMC==12B27
DTEN==4 ;MAX NUMBER OF DTE'S
TO11DB==1B22 ;TO 11 DOORBELL
CL11PT==1B26 ;CLEAR TO 10 DOORBELL
PI0ENB==1B32 ;PI CHANNEL 0 ENABLE
PIENB==1B31 ;ENABLE PI SETTING
DTERES==1B20 ;RESTRICTED BIT
;STILL FTEXEC
;KL10 APR INTERNAL CLOCK SERVICE DEFINITIONS
;CONI/CONO MTR,
MTR==024 ;DEVICE CODE
MTRLOD==1B18 ;LOAD BITS 21-23
; 19-20 ;UNUSED, MBZ
MTREPA==1B21 ;ENABLE EXEC PI ACCOUNTING
MTRENA==1B22 ;ENABLE EXEC NON-PI ACCOUNTING
MTRAMN==1B23 ;ACCOUNTING METERS ON
MTRTBF==1B24 ;TIME BASE OFF
MTRTBN==1B25 ;TIME BASE ON
MTRCTB==1B26 ;CLEAR TIME BASE
; 27-32 ;UNUSED, MBZ
MTRPIA==7B35 ;PI ASSIGNMENT
;CONI/CONO TIM
TIM==020 ;DEVICE ASSIGNMENT
TIMCIC==1B18 ;CLEAR INTERVAL COUNTER
; 19-20 ;UNUSED, MBZ
TIMITO==1B21 ;INTERVAL TIMER ON
TIMDON==1B22 ;DONE/CLEAR DONE
TIMICO==1B23 ;COUNTER OVERFLOW
;STILL FTEXEC
;KS10 TELETYPE I/O DEFINITIONS
RLWORD==31 ;RELOAD CONTROL WORD
KPACT==1B5 ;KEEP-ALIVE ACTIVE BIT
CTYIWD==32 ;CTY INPUT WORD
CTYIRD==400 ;CTY INPUT READY FLAG
CTYOWD==33 ;CTY OUTPUT WORD
CTYORD==400 ;CTY OUTPUT READY FLAG
INT80==1B23!1B25 ;INTERRUPT 8080
> ;END IFN FTEXEC
SUBTTL TELETYPE IO LOGIC -- INPUT ROUTINES
;TIN -- ROUTINE TO READ THE NEXT INPUT CHARACTER
;CALL:
; PUSHJ P,TIN
;
;RETURNS +1 WITH NEXT CHARACTER IN T.
TIN: SOSGE CHINC ;CHARACTER LEFT IN LINE BUFFER?
JRST CHIN1 ;NO, GO REFILL BUFFER
ILDB T,CHINP ;GET CHARACTER
POPJ P, ;RETURN WITH CHARACTER IN T
;REFILL LINE BUFFER WITH EDITING
IFN FTDEC20,<
CHIN1:
IFN FTEXEC,<
SKPUSR ;EXEC MODE?
JRST XCHIN1> ;YES, USE SIMULATION ROUTINES
SKIPE T1,CHINP ;REINIT LINE?
JRST CHIN2 ;NO
MOVEI T1,NLINBF*5 ;YES, SETUP MAX CHAR COUNT
MOVEM T1,LINSPC
MOVE T1,LINBP ;SETUP POINTER
MOVEM T1,CHINP
CHIN2: MOVEM T1,TEXTIB+.RDBKL ;SET BACKUP LIMIT
SKIPG LINSPC ;ROOM LEFT IN BUFFER?
JRST ERR ;NO, TOO MUCH TYPIN
SETZ T1,
SKIPE WAKALL ;WAKEUP ON EVERYTHING?
XMOVEI T1,ONES4 ;YES, USE WAKEUP TABLE
MOVEM T1,ETXTB
PUSH P,LINSPC ;SAVE CURRENT SPACE
PUSH P,CHINP ;AND POINTER
XMOVEI T1,TEXTIB ;POINT TO ARG BLOCK
TEXTI% ;INPUT TO NEXT BREAK CHAR
JRST ERR ;BAD ARGS (IMPOSSIBLE)
POP P,CHINP ;RESTORE POINTER TO CHARS JUST TYPED
MOVE T1,TEXTIB+.RDFLG ;GET FLAGS
TXNE T1,RD%BFE+RD%BLR ;DELETIONS?
JRST CHIN3 ;YES
POP P,T1 ;RECOVER OLD SPACE COUNT
SUB T1,LINSPC ;COMPUTE NUMBER CHARS JUST TYPED
MOVEM T1,CHINC ;SETUP COUNT
JRST TIN ;GO RETURN NEXT CHAR
;USER HAS DELETED BACK INTO TEXT ALREADY PROCESSED, THEREFORE
;LINE MUST BE REPROCESSED FROM BEGINNING. POSSIBLY ALL TEXT HAS BEEN
;DELETED.
CHIN3: MOVEI T1,NLINBF*5 ;COMPUTE NUMBER CHARS NOW IN LINE
SUB T1,LINSPC
JUMPE T1,WRONG ;JUMP IF WHOLE LINE DELETED
MOVEM T1,CHINC ;LINE NOT NULL, SETUP CHAR COUNT
MOVE T1,LINBP ;REINIT POINTER
MOVEM T1,CHINP
MOVE T1,[SCHR,,SCH] ;RESTORE TYPEOUT MODES
BLT T1,ODF ; . . .
JRST DD2 ;CLEAR WORLD AND REDO LINE
> ;END IFN FTDEC20
IFN FTDEC10!FTEXEC,<
IFNDEF T1,<
T1==A
PURGT1==-1
>
IFN FTDEC10,<
CHIN1:>
XCHIN1: SKIPE T1,CHINP ;REINIT LINE?
JRST XCHIN2 ;NO
MOVEI T1,NLINBF*5 ;YES, SETUP MAX CHAR COUNT
MOVEM T1,LINSPC
MOVE T1,LINBP ;SETUP POINTER
MOVEM T1,CHINP
XCHIN2: MOVEM T1,LINDB ;SET BEGINNING OF DELETE BUFFER
SKIPG LINSPC ;ROOM LEFT IN BUFFER?
JRST ERR ;NO, TOO MUCH TYPIN
MOVEI T1,LINBP-TEXTIB ;SIZE OF BLOCK
SKIPE WAKALL ;WAKEUP ON EVERYTHING?
MOVEI T1,ETXTB-TEXTIB ;YES, INCLUDE WAKEUP TABLE
MOVEM T1,TEXTIB ;SET SIZE IN BLOCK
PUSH P,LINSPC ;SAVE CURRENT SPACE
PUSH P,CHINP ;AND POINTER
MOVEI T1,TEXTIB ;POINT TO ARG BLOCK
PUSHJ P,TXTI
JRST ERR ;BAD ARGS (IMPOSSIBLE)
POP P,CHINP ;RESTORE POINTER TO CHARS JUST TYPED
POP P,T1 ;RECOVER OLD SPACE COUNT
IFN FTYANK,<
AOSN PTDFLG ;EOF ON COMMAND FILE
JRST [SETZM CHINC
SETZM CHINP
JRST DD2] ;GET BACK TO TOP LEVEL
> ;END FTYANK
SKIPN 0(P) ;REPROCESS NEEDED?
JRST [MOVEI T1,NLINBF*5
SUB T1,LINSPC ;YES, COMPUTE NUMBER CHARS IN LINE
JUMPE T1,WRONG ;JUMP IF WHOLE LINE DELETED
MOVEM T1,CHINC ;LINE NOT NULL, SETUP CHAR COUNT
MOVE T1,LINBP ;REINIT POINTER
MOVEM T1,CHINP
MOVE T1,[SCHR,,SCH] ;RESTORE TYPEOUT ETC. MODES
BLT T1,ODF ; . . .
JRST DD2] ;CLEAR WORLD AND REDO LINE
SUB T1,LINSPC ;COMPUTE NUMBER CHARS JUST TYPED
JUMPG T1,[MOVEM T1,CHINC ;SETUP COUNT
JRST TIN] ;GO RETURN NEXT CHAR
;CONTINUED ON NEXT PAGE
;USER HAS DELETED BACK INTO TEXT ALREADY PROCESSED, THEREFORE LINE
;MUST BE REPROCESSED FROM BEGINNING. POSSIBLY ALL TEXT HAS BEEN
;DELETED.
PUSHJ P,RDBKIN
SETZM 0(P) ;REQUEST REPROCESS OF LINE
MOVE T1,LINBP ;RESET DELETE BOUNDARY TO BEGINNING OF LINE
JRST XCHIN2
IFDEF PURGT1,<IFL PURGT1,< PURGE PURGT1,T1>>
SUBTTL TELETYPE IO LOGIC -- LINE BUFFERING ROUTINES
TXTI:
DOTXTI: PUSH P,A ;SAVE ALL ACS USED
PUSH P,B
PUSH P,C
PUSH P,T
PUSH P,W1
PUSH P,W2
MOVE W1,LINSPC ;COUNT OF BYTES IN DESTINATION
SKIPN W2,LINDB ;WAS IT NON-ZERO?
MOVE W2,CHINP ;NO. USE DEFAULT
; VERIFY ALL OF THE STRING POINTERS
RDTXT1: MOVE A,CHINP ;HAVE A DEST POINTER?
PUSHJ P,RDCBP ;YES. CHECK IT OUT
MOVEM A,CHINP ;GET CONVERTED POINTER
SKIPN A,LINBP ;HAVE A ^R BUFFER?
JRST RDTOPM ;NO. GO AROUND THEN
PUSHJ P,RDCBP ;YES. VERIFY IT
MOVEM A,LINBP ;STORE VERIFIED POINTER
RDTOPM: MOVE A,W2 ;GET TOP OF BUFFER
PUSHJ P,RDCBP ;VERIFY IT
MOVE W2,A ;ALL VERIFIED NOW
JUMPLE W1,WRAP0 ;MAKE SURE COUNT HAS ROOM IN IT
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;MAIN LOOP - DOES INPUT OF BYTE AND DISPATCH ON CHARACTER CLASS
;ACTION ROUTINES EXIT TO:
; INSRT - APPEND CHARACTER AND CONTINUE
; NINSRT - CONTINUE WITHOUT APPENDING CHARACTER
; DING - BUFFER NOW EMPTY, POSSIBLE RETURN TO USER
; WRAP, WRAP0 - RETURNS TO USER
NINSRT: MOVEM W1,LINSPC ;STORE COUNT
PUSHJ P,RDBIN ;DO BIN
MOVE A,B ;SAVE BYTE
IDIVI B,CHRWRD ;SETUP TO GET CHAR CLASS
LDB B,CCBTAB(C) ;GET IT FROM BYTE TABLE
IDIVI B,2 ;SETUP TO REF DISPATCH TABLE
JUMPE C,[HLRZ T,DISPTC(B) ;GET LH ENTRY
JRST .+2]
HRRZ T,DISPTC(B) ;GET RH ENTRY
MOVE B,A ;ROUTINES GET BYTE IN B
JRST 0(T) ;DISPATCH TO ACTION ROUTINE
;RETURN FROM ACTION ROUTINE TO APPEND CHARACTER AND CONTINUE.
; B/ CHARACTER
INSRT: SKIPE WAKALL ;BREAK ON EVERYTHING?
JRST WRAP ;YES. WRAP IT UP THEN
IDPB B,CHINP ;APPEND BYTE TO USER STRING
SOJG W1,NINSRT ;CONTINUE IF STILL HAVE COUNT
JRST WRAP0 ;COUNT EXHAUSTED, RETURN
;RETURNS TO USER.
;RETURN TO USER IF BUFFER EMPTY
NDING: CAME W2,CHINP ;BUFFER EMPTY?
JRST NINSRT ;NO, GO GET MORE INPUT
JRST WRAP0
;APPEND LAST CHARACTER AND RETURN
WRAP: IDPB B,CHINP ;APPEND BYTE
SUBI W1,1 ;UPDATE COUNT
;STORE NULL ON STRING AND RETURN
WRAP0: JUMPLE W1,WRAP1 ;DON'T STORE NULL IF COUNT EXHAUSTED
SETZ B,
MOVE A,CHINP
IDPB B,A ;STORE NULL WITHOUT CHANGING USER PTR
;UPDATE USER VARIABLES AND RETURN
WRAP1: MOVEM W1,LINSPC ;UPDATE USER'S BYTE COUNT
POP P,W2
POP P,W1
POP P,T
POP P,C
POP P,B
POP P,A
JRST CPOPJ1
;PARAMETERS FOR CLASS TABLE
CCBITS==4 ;BITS/BYTE
CHRWRD==^D36/CCBITS ;BYTES/WORD
;DEFINED CHARACTER CLASSES:
TOP==0 ;TOPS10 BREAK
BRK==1 ;REGULAR BREAK SET
ZER==2 ;NULL
EOLC==3 ;EOL
PUN==4 ;PUNCTUATION
SAFE==5 ;ALL OTHERS
RUBO==6 ;DELETE A CHARACTER
RTYP==7 ;RETYPE THE LINE
KLL==10 ;DELETE THE LINE
KWRD==11 ;DELETE A WORD
RDCRC==12 ;CARRIAGE RETURN
RDQTC==13 ;QUOTE CHARACTER
;TABLE OF BYTE PTRS TO REFERENCE CLASS TABLE
XX==CCBITS-1
XALL
CCBTAB: REPEAT CHRWRD,<
POINT CCBITS,CTBL(B),XX
XX=XX+CCBITS>
SALL
;CLASS DISPATCH TABLE
DISPTC: WRAP,,WRAP
ZNULL,,EOL1
WRAP,,INSRT
DELC,,RTYPE
DELL,,DELW
RDCR,,RDQT
;CHARACTER CLASS TABLE
DEFINE CCN (A,B)<
REPEAT B,<
CC1 (A)>>
DEFINE CC1 (C)<
QQ=QQ+CCBITS
IFG QQ-^D35,<
QW
QW=0
QQ=CCBITS-1>
QW=QW+<C>B<QQ>>
QW==0
QQ==-1
CTBL: CC1(ZER) ;0
CCN(PUN,6) ;1-6
CC1(TOP) ;7
CCN(PUN,2) ;10-11
CC1(EOLC) ;12
CC1(PUN) ;VT
CC1(TOP) ;FF
CC1(RDCRC) ;CR
CCN(PUN,4) ;16-21 (^N-^Q)
CC1(RTYP) ;^R
CCN(PUN,2) ;^S,^T
CC1(KLL) ;^U
CC1(RDQTC) ;^V
CC1(KWRD) ;^W
CCN(PUN,2) ;^X,^Y
CCN(BRK,2) ;^Z,$
CCN(PUN,4) ;34-37
CCN(PUN,^D16) ;40-/
CCN(SAFE,^D10) ;0-9
CCN(PUN,7) ;:-@
CCN(SAFE,^D26) ;A-Z
CCN(PUN,6) ;]-140
CCN(SAFE,^D26) ;A-Z
CCN(PUN,4) ;173-176
CC1(RUBO) ;177
QW ;GET LAST WORD IN
;LOCAL ROUTINES TO DO LOGICAL BIN AND BOUT.
RDBIN: SKIPN B,SAVCHR ;WANT TO BACK UP?
JRST RDBIN0 ;NO
SETZM SAVCHR ;ONLY ONCE
POPJ P, ;RETURN
RDBIN0:
IFN FTEXEC,<
SKPEXC
JRST RDBIN2 ;USER MODE
;READ AN EXEC-MODE COMMAND CHARACTER
PUSH P,T ;SAVE T
IFN FTYANK,<
SKIPE COMAND
PUSHJ P,XPTRIN>
PUSHJ P,XTIN ;GET A BYTE
MOVE B,T ;PUT IN CORRECT PLACE
JRST RDBIN8 ;EXIT WITH CHARACTER
RDBIN2:
> ;END IFN FTEXEC
;READ A TOPS-10 USER-MODE COMMAND CHARACTER
IFN FTYANK,<
PUSH P,T ;SAVE AN AC
SKIPE COMAND ;COMMAND FILE OPEN?
PUSHJ P,PTRIN ;READ COMMAND FILE
CAIA ;READ FROM TTY
JRST RDBIN6 ;GOT A CHARACTER (ALREADY ECHOED)
MOVEI T," " ;ASSUME EOF
SKIPL PTDFLG ;WAS IT EOF?
> ;END IFN FTYANK
INCHRW T ;READ A BYTE FROM COMMAND TTY
PUSHJ P,TOUT6 ;"ECHO" (COUNT) THE CHARACTER
RDBIN6: MOVE B,T ;COPY BYTE
RDBIN8: POP P,T ;RESTORE T
MOVEM B,LASCHR ;SAVE LAST CHAR READ
POPJ P,0 ;RETURN
;RDSOUT - OUTPUT STRING ALA ECHOB
; B/ STRING PTR
; PUSHJ P,RDSOUT
; RETURN +1 ALWAYS
RDSOUT: MOVE A,B ;COPY POINTER
PUSHJ P,RDCBP
RDSL: ILDB B,A
JUMPE B,CPOPJ ;EXIT ON NULL
PUSHJ P,ECHOB ;"ECHO" THE CHARACTER
JRST RDSL
;CHECK BYTE POINTER GIVEN AS ARGUMENT
; A/ BYTE POINTER
; PUSHJ P,RDCBP
; RETURN +1: OK, LH INITIALIZED IF NECESSARY
RDCBP: HLRZ B,A ;GET LH
CAIN B,-1 ;IS DEFAULT?
HRLI A,(<POINT 7,0>) ;YES, FILL IN 7-BIT
LDB B,[POINT 6,A,11] ;CHECK BYTE SIZE
CAIGE B,7 ;7 OR GREATER?
HALT . ;BAD BYTE SIZE
IBP A ;INCR IT AND DECR IT ONCE SO WILL
JRST DBP ; BE IN KNOWN STATE FOR COMPARES
;GET TYPEIN CHARACTER - EXEC MODE
IFN FTEXEC,<
XTIN: PUSHJ P,XLISTE ;TELETYPE CHARACTER INPUT
JRST .-1
SETZM TTSUP ;CLEAR ^O SUPPRESSION ON ANY INPUT
JUMPE T,XTIN ;FILTER NULLS
CAIE T,175
CAIN T,176
MOVEI T,.CHESC ;CHANGE ALL ALT MODES TO NEW
CAIE T,.CHDEL ;DON'T ECHO EDIT CHARACTERS
CAIN T,.CHCNU
POPJ P,
CAIE T,.CHCNR
CAIN T,.CHCNW
POPJ P,
CAIN T,.CHTAB ;A <TAB> CHARACTER
TXNE F,TXF ;YES, DON'T ECHO UNLESS TEXT MODE
CAIA ;NOT A <TAB> OR TEXT MODE
POPJ P, ;A <TAB> AND NOT TEXT MODE
CAIN T,.CHCRT ;CR?
JRST [MOVEI T,.CHLFD ;YES, PRESET LF FOR NEXT TIME
MOVEM T,XNXTCH
MOVEI T,.CHCRT ;ECHO AND RETURN CR NOW
JRST .+1]
PJRST ECHO ;ECHO THE CHARACTER
> ;END IFN FTEXEC
;LOCAL ROUTINES FOR EDITING FUNCTIONS
;DELETE CHARACTER FROM DESTINATION - BACKUP PTR AND CHECK
;FOR TOP OF BUFFER
; PUSHJ P,BACK
; RETURN +1: AT TOP OF BUFFER, NO CHARACTER TO DELETE
; RETURN +2: CHARACTER DELETED
;
;ON SKIP RETURN, AC A HAS OLD BYTE POINTER, AC B HAS CHARACTER
;THAT WAS JUST "DELETED".
BACK: CAMN W2,CHINP ;AT TOP OF BUFFER?
POPJ P,0 ;YES
MOVE A,CHINP ;GET DEST PTR
PUSHJ P,DBP ;DECREMENT IT
MOVEM A,CHINP ;PUT IT BACK
ILDB B,A ;GET CHARACTER JUST "DELETED"
AOJA W1,CPOPJ1 ;UPDATE COUNT AND RETURN
;PUT BYTE BACK INTO SOURCE
; B/ BYTE
; PUSHJ P,RDBKIN
; RETURN +1 ALWAYS
RDBKIN:
DOBKIN: MOVE A,LASCHR ;GET LAST BYTE READ
MOVEM A,SAVCHR ;MAKE NEXT BYTE READ
POPJ P,0
;FIND BEGINNING OF CURRENT LINE.
; PUSHJ P,FNDLIN
; RETURN +1: AT TOP OF BUFFER
; RETURN +2: A/ BACKED-UP BYTE PTR TO BEGINNING OF LINE
; B/ BYTE COUNT CONSISTENT WITH CHINP IN A
FNDLIN: CAMN W2,CHINP ;AT TOP OF BUFFER?
POPJ P,0 ;YES
PUSH P,CHINP ;SAVE CURRENT LINE VARIABLES
PUSH P,W1
FNDLN1: MOVE A,CHINP ;BACKUP ONE CHARACTER
PUSHJ P,DBP
MOVEM A,CHINP
ADDI W1,1
CAMN W2,CHINP ;NOW AT TOP OF BUFFER?
JRST FNDLN2 ;YES, RETURN
LDB B,CHINP ;NO, LOOK AT NEXT CHAR TO BE DELETED
CAIN B,.CHLFD ;EOL OR LF?
JRST FNDLN2 ;YES, RETURN
JRST FNDLN1 ;NO, KEEP LOOKING
FNDLN2: MOVE A,CHINP ;RETURN NEW LINE VARIABLES
MOVE B,W1
POP P,W1 ;RESTORE OLD LINE VARIABLES
POP P,CHINP
JRST CPOPJ1
;ACTION ROUTINES
;ZERO BYTE
ZNULL: SKIPE WAKALL ;USER HAVE A MASK?
JRST INSRT ;YES. GO SEE ABOUT IT THEN
JRST WRAP0 ;NO. ALWAYS BREAK THEN
;CARRIAGE RETURN - IF LINE FEED FOLLOWS, TREAT LIKE EOL
RDCR: CAIGE W1,2 ;ROOM FOR CR AND LF?
JRST [PUSHJ P,RDBKIN ;NO, PUT THE CR BACK
JRST WRAP0] ;WILL GET IT NEXT TIME
PUSHJ P,RDBIN ;GET THE NEXT CHAR
CAIN B,.CHLFD ;LF?
JRST RDCR1 ;YES, NORMAL NEWLINE
PUSHJ P,RDBKIN ;NO, PUT BACK THE SECOND BYTE
MOVEI B,.CHCRT ;APPEND A REAL CR
JRST WRAP
RDCR1: MOVEI B,.CHCRT
IDPB B,CHINP ;APPEND CR
SOS W1
RDCR2: MOVEI B,.CHLFD
EOL1: JRST WRAP ;YES
;QUOTE CHARACTER (^V) - INHIBITS EDITING ACTION OF FOLLOWING CHARACTER
RDQT: CAIGE W1,2 ; ROOM FOR BOTH?
JRST [PUSHJ P,RDBKIN ; NO. BACK UP
JRST WRAP0] ; AND WAIT FOR NEXT TIME
IDPB B,CHINP ;STORE QUOTE
SOS W1 ; ONE LESS
PUSHJ P,RDBIN ;GET THE NEXT CHAR
JRST WRAP ;YES
;DELETE CHARACTER (RUBOUT)
DELC: PUSHJ P,DELCH ;DELETE A CHARACTER
JRST WRAP0 ;NONE TO BE DELETED
JUMPL B,RTYPE ;IF FUNNY CHARACTER FORCE A ^R
JRST NINSRT ;CONTINUE INPUT UNLESS BUFFER EMPTY ETC.
;DELETE WORD (CONTROL-W)
DELW: PUSHJ P,BACK ;DELETE AT LEAST ONE CHARACTER
JRST WRAP0 ;WASN'T ONE
CAIN B,.CHLFD ;LF OR EOL?
JRST BWRD3 ;YES, DON'T DELETE
MOVX T,TT$DEL ;FANCY DELETE HANDLING
IFE FTEXEC,<
TDNN T,TTYMSK > ;DO WE HAVE IT?
IFN FTEXEC,<
TDNE T,TTYMSK ;DO WE HAVE IT
SKPUSR > ;OR ARE WE IN EXEC MODE?
JRST BWRD1 ;DON'T WORRY ABOUT ^W ON SCREEN
PUSHJ P,DELCH4 ;WIPE OUT THE "^" CHARACTER
JFCL ;DON'T GET HERE
PUSHJ P,DELCH4 ;WIPE OUT THE "W" CHARACTER
JFCL ;DON'T GET HERE EITHER
MOVE A,CHINP ;GET DELETED BYTE POINTER
IBP A ;RESET A FOR DELCH0
BWRD1: LDB B,A ;GET COPY OF CHARACTER TO BE ZAPPED
PUSHJ P,DELCH0 ;DELETE CHARACTER FROM SCREEN
JFCL ;CAN'T HAPPEN
JUMPL B,RTYPE ;IF (E.G.) TAB THEN FORCE A ^R
PUSHJ P,BACK ;DELETE NEXT CHARACTER
JRST BWRD2 ;NO MORE LEFT
IDIVI B,CHRWRD ;GET ITS CHARACTER CLASS
LDB B,CCBTAB(C)
CAIN B,SAFE ;IS IT A WORD SEPARATOR?
JRST BWRD1 ;KEEP DELETING
BWRD3: IBP CHINP ;YES, KEEP THAT CHARACTER
SUBI W1,1
BWRD2: JRST NINSRT ;CONTINUE INPUT UNLESS BUFFER EMPTY ETC.
;DELETE LINE (CONTROL-U)
DELL: PUSHJ P,FNDLIN ;FIND BEGINNING OF LINE
JRST NDING ;NOTHING IN BUFFER
LDB C,CHINP ;GET LAST CHAR IN BUFFER
MOVEM A,CHINP ;SET LINE VARIABLES TO BEGINNING
MOVEM B,W1
JRST NDING ;CONTINUE INPUT UNLESS BUFFER EMPTY ETC.
;DELCH -- DELETE A CHARACTER FROM BUFFER AND TERMINAL
;CALL IS:
;
; PUSHJ P,DELCH
; EMPTY
; NORMAL
;
;DELCH DELETES THE PREVIOUS INPUT CHARACTER, BOTH INTERNALLY
;(A LA BACK ROUTINE) AND ON THE TERMINAL (HANDLING ANY FANCY
;VIDEO EDITING NEEDED).
;
;DELCH4 CAN BE CALLED TO BLANK OUT THE PREVIOUS CHARACTER ON
;THE SCREEN VIA A <BS><SP><BS> SEQUENCE.
;
;DELCH8 CAN BE CALLED TO OUTPUT A <CR><LF> PAIR.
;
;ON SKIP RETURN AC B HAS THE CHARACTER WHICH WAS JUST DELETED.
DELCH: PUSHJ P,BACK ;BACKUP PTR
POPJ P, ;NOTHING LEFT IN BUFFER
DELCH0: CAIN B,.CHLFD ;WAS IT LF?
JRST DELCH6 ;YES
MOVE T,TTYMSK ;[210] GET FORMAT MASK
TXNE T,TT$DEL ;[210] FANCY <DEL>'S?
JRST DELCH4 ;[210] YES - <BS><SP><BS>
PUSHJ P,ECHOB ;TYPE IT OUT (AND COUNT UP TOHPS)
MOVEI B,"\" ;INDICATE DELETION
PUSHJ P,ECHOB ;COUNT IT TOO
DELCH3: MOVE A,CHINP ;INPUT POINTER
ILDB B,A ;RETURN CHARACTER JUST DELETED IN B
CAIN B,.CHTAB ;DELETED A <TAB>?
SETO B, ;YES, WARN NEED A ^R FOR SCREEN
JRST CPOPJ1 ;SUCCESSFULL RETURN
DELCH4: MOVEI B,.CHCNH ;A BACKSPACE CHARACTER
PUSHJ P,ECHOB ;OUTPUT IT
MOVEI B," " ;A SPACE CHARACTER
PUSHJ P,ECHOB ;OUTPUT IT
MOVEI B,.CHCNH ;AND FINALLY A BACKSPACE CHARACTER
PUSHJ P,ECHOB ;OUTPUT IT TOO
JRST DELCH3 ;[210] REJOIN COMMON CODE
DELCH6: CAMN W2,CHINP ;AT BEGINNING OF DEST BUFFER?
JRST DELCH8 ;YES
LDB B,CHINP ;NO, CHECK CHARACTER PRECEEDING LF
CAIE B,.CHCRT ;A CR?
JRST DELCH8 ;NO, LEAVE IT ALONE
PUSHJ P,BACK ;YES, DELETE IT ALSO
POPJ P, ;(CAN'T HAPPEN)
; (TAKE SUCCESSFUL RETURN WITH <LF>)
DELCH8: MOVEI B,.CHCRT ;A <CR> CHARACTER
PUSHJ P,ECHOB ;OUTPUT IT
MOVEI B,.CHLFD ;A <LF> CHARACTER
PUSHJ P,ECHOB ;OUTPUT IT TOO
JRST CPOPJ1 ;SUCCESSFUL RETURN
;RETYPE LINE (CONTROL-R)
RTYPE: PUSHJ P,RTYPES ;DO THE WORK
JRST NINSRT
;SUBROUTINE TO RETYPE LINE
RTYPES: PUSHJ P,DELCH8 ;OUTPUT A <CR><LF>
JFCL ; (DON'T GET HERE)
PUSHJ P,FNDLIN ;FIND BEGINNING OF LINE
MOVE A,W2 ;AT TOP OF BUFFER - USE IT
MOVE T,A ;SAVE PTR TO BEGINNING OF LINE
CAME T,W2 ;BEG OF LINE IS TOP OF BUFFER?
JRST RTYP1 ;NO, DON'T TYPE ^R BFR
SKIPE T,LINBP ;GET ^R BFR IF ANY
RTYW1: CAMN T,W2 ;UP TO TOP OF BFR?
JRST RTYP4 ;YES, DONE WITH ^R BFR
ILDB B,T ;GET CHAR FROM ^R BFR
JUMPN B,[PUSHJ P,ECHOB;RE-ECHO IT
JRST RTYW1]
RTYP4: MOVE T,W2 ;DONE WITH ^R BFR, NOW DO MAIN BFR
RTYP1: CAMN T,CHINP ;BACK TO END OF LINE?
POPJ P, ;YES
ILDB B,T ;NO, GET NEXT BYTE
PUSHJ P,ECHOB ;RE-ECHO IT
JRST RTYP1 ;LOOP UNTIL AT END OF BUFFER
;DECREMENT BYTE POINTER
; A/ BYTE PTR
; PUSHJ P,DBP
; RETURNS +1, CLOBBERS B AND C
DBP: LDB B,[POINT 6,A,5] ;GET P
LDB C,[POINT 6,A,11] ;GET S
ADD B,C ;NEW P = P + S
CAIGE B,^D36 ;NEW P .GE 36?
JRST DBP1 ;NO, BYTE IS IN SAME WORD.
HRRI A,-1(A) ;DECREMENT ADDRESS
MOVEI B,^D36 ;MAKE P = REMAINDER (36,S)
IDIV B,C
MOVEI B,0(C)
DBP1: DPB B,[POINT 6,A,5]
POPJ P,0
> ;END IFN FTDEC10...
SUBTTL TELETYPE IO LOGIC -- UTILITY ROUTINES
;LISCK -- SUBROUTINE USED BY $$X, $W, AND $Z TO CHECK FOR INPUT
;CALL IS:
;
; PUSHJ P,LISCK
; NOTHING TYPED
; SOMETHING TYPED, ABORT
; "?" TYPED, GIVE STATUS
;
;USES AC T, TT2.
LISCK: PUSHJ P,LISTEN ;ANYTHING TYPED?
POPJ P, ;NO, "NOTHING TYPED" RETURN
AOS (P) ;SOMETHING TYPED
CAIN T,"?" ;USER TYPE A "?" CHARACTER?
AOS (P) ;YES, "GIVE STATUS" RETURN
POPJ P, ;NO, "ABORT" RETURN
;LISTEN -- SUBROUTINE TO TEST IF INPUT IS READY
;CALL:
; PUSHJ P,LISTEN
; NONE
; INPUT READY
;
;ALSO READS ONE CHARACTER INTO T. THIS CHARACTER IS EITHER
;REAL COMMAND INPUT, OR IS THROWN OUT SO A CHAR TYPED TO STOP A
;DDT LOOP WILL NOT AFFECT FUTURE COMMAND INPUT.
LISTEN:
IFN FTEXEC,<
SKPUSR ;IN EXEC MODE?
JRST XLISTN ;[230] YES, USE SPECIAL EXEC CODE
> ;END OF IFN FTEXEC
IFN FTFILE&FTYANK,< ;FILDDT?
SKIPE COMAND ;STILL READING COMAND FILE?
POPJ P,0 ; IF YES, DO NOT LOOK FOR INPUT
; 1. SPEED UP FILDDT AND
; 2. ALLOW USER TO TYPE AHEAD
; (ONE CONTROL C)
> ;END OF IFN FTFILE&FTYANK
IFN FTDEC10,<
INCHRS T ;GET NEXT CHAR, NO IO WAIT
POPJ P, ;NO CHARACTER EXISTED, RETURN
JRST CPOPJ1 ;CHARACTER WAS THERE, SKIP RETURN
> ;END IFN FTDEC10
IFN FTDEC20,<
PUSHJ P,SAVR ;SAVE R(=T2) OVER SIBE%
EXCH T1,T
MOVEI T1,.PRIIN ;PRIMARY INPUT (TTY)
SIBE% ;INPUT BUFFER EMPTY?
AOSA 0(P) ;NO, GIVE SKIP RETURN
JRST LISTN6 ;YES, JUST RETURN NON-SKIP
PBIN% ;READ CHAR INTO T1
LISTN6: EXCH T1,T
POPJ P, ;RETURN
> ;END IFN FTDEC20
IFN FTEXEC,<
;HERE TO LISTEN IF IN EXEC MODE
XLISTE: SKIPE T,XNXTCH ;PRESET CHAR?
JRST [SETZM XNXTCH ;YES, RETURN IT ONCE
JRST XLIST8]
IFN FTYANK,<
SKIPE COMAND ;COMAND FILE?
JRST XPTRIN ;YES, READ IT
>
;ENTRY POINT FROM LISTEN.
;SEE IF A KL10, AND DO KL10 LISTEN IF SO.
XLISTN: SKPKL ;A KL10?
JRST XLIST2 ;NOT KL, CHECK OTHER CPUS
EXCH TT,TT2 ;SAVE TT
PUSHJ P,GVEPT ;GET EPT BASE IN TT
HALT . ;NOT IN ADDRESS SPACE!
EXCH TT,TT2 ;PUT ADDRESS IN TT2
SKIPN DTEMTI(TT2) ;ANY INPUT YET?
POPJ P, ;NO
MOVE T,DTEF11(TT2) ;GET IT
SETZM DTEMTI(TT2) ;YES
JRST XLIST8 ;AND CHAR DOWN AND RETURN
;STILL FTEXEC
;HERE IF NOT ON A KL10. TRY A KS10.
XLIST2: SKPKS ;ON A KS10?
JRST XLIST4 ;NO, GO DO OLD (KA/KI) WAY
MOVE T,CTYIWD ;PICK UP INPUT WORD
TXNN T,CTYIRD ;ANYTHING THERE?
POPJ P, ;NO CHARACTER, RETURN CPOPJ0
SETZM CTYIWD ;YES, SAY WE GOT IT
MOVE TT2,SAVAPR ;GET APR STATE
ANDI TT2,7 ;REDUCE TO PI ASSIGNMENT
WRAPR INT80(TT2) ;TELL 8080
JRST XLIST8 ;AND CHAR DOWN AND GIVE GOOD RETURN
;HERE TO DO OLD STYLE (KA/KI) LISTEN TO REAL HARDWARE CTY
XLIST4: CONSO TTY,40 ;DO KA OR KI TTY INPUT
POPJ P, ;NO CHARACTER
DATAI TTY,T ;READ IN PHYSICAL CHARACTER
;HERE FROM ALL CPU'S TO AND CHAR DOWN TO 7 BITS AND GIVE SKIP RETURN.
XLIST8: ANDI T,177 ;STRIP OFF GARBAGE
CAIE T,.CHCNO ;USER TYPE A ^O?
JRST XLIST9 ;NO, RETURN CHARACTER IN AC T
SETCMM TTSUP ;TOGGLE ^O SUPPRESSION FLAG
JRST XLISTN ;AND SEE IF ANY MORE INPUT
XLIST9: SETZM TTSUP ;CLEAR SUPPRESSION FLAG
JRST CPOPJ1 ;AND RETURN WITH CHARACTER IN T
> ;END IFN FTEXEC
IFN FTDEC10,<
IFN FTYANK,<
IFN FTEXEC,<
XPTRIN: PUSHJ P,PTRXNX ;GET NEXT CHAR FROM PTR
JRST PTRDON ;THROUGH
JRST PTRCHR ;PROCESS THE CHAR.
>
PTRIN: PUSHJ P,PTRNX ;GET NEXT CHAR
JRST PTRDON ;EOF ON COMMAND FILE
PTRCHR: CAIE T,.CHDEL ;RUBOUT?
SKIPN TT2,T ;NULL?
JRST PTRNXT ;IGNORE IT
IFN FTEXEC,<
SKPEXC ;EXEC MODE?
JRST PTRCH2
CAIE T,.CHCRT ;YES. CR?
JRST CPOPJ1 ;NO. ECHO OF CHAR WILL HAPPEN LATER
PUSHJ P,PTRXNX ;READ (AND IGNORE) NEXT CHAR
JFCL ; WHICH OUGHT TO BE A LINE-FEED
MOVEI T,.CHCRT ;RETURN CR AS CHAR
JRST CPOPJ1
PTRCH2: >;END IFN FTEXEC
PUSHJ P,ECHO ;ECHO CHAR
JRST CPOPJ1 ;SKIP-RETURN WITH DATA
PTRNXT:
IFN FTEXEC,< SKPUSR
JRST XPTRIN>
JRST PTRIN
;THROUGH WITH COMMAND FILE
PTRKIL: PUSHJ P,PTRNX2 ;GO ZAPETH THE COMMAND FILE
;AND FALL INTO EOF CODE
PTRDON: SETZM COMAND ;NO LONGER PROCESSING COMMAND FILE
SETOM PTDFLG ;FLAG EOF REACHED
PUSHJ P,DELCH8 ;TYPE A <CR><LF>
JFCL ;DON'T GET HERE
PUSHJ P,DELCH8 ;TYPE ANOTHER <CR><LF>
JFCL ;DON'T GET HERE EITHER
POPJ P, ;NON-SKIP RETURN
;STILL FTDEC10 & FTYANK
;COMMAND FILE IO
PTRNX: SOSLE CBUF+2 ;DATA LEFT?
JRST PTRNX1 ;YES
IN CM, ;GET NEXT BUFFER
JRST PTRNX1 ;GET NEXT CHARACTER
GETSTS CM,T ;ERROR, SEE WHAT KIND
TXNE T,IO.EOF ;END OF FILE?
JRST PTRNX2 ;YES, OK, JUST QUIT
TMSG <
? I/O error reading command file
> ;WARN USER OF LOSAGE
JRST PTRNX2 ;YES
;RETURN NEXT CHARACTER
PTRNX1: ILDB T,CBUF+1
JRST CPOPJ1 ;SKIP-RETURN WITH DATA
;RELEASE COMMAND FILE
PTRNX2: RELEASE CM, ;EOF - DONE
POPJ P, ;NON-SKIP MEANS DONE WITH COMMAND FILE
;STILL FTDEC10 & FTYANK
IFN FTEXEC,<
PTRXNX: SKIPE TT2,EPTPTR ;DATA IN PTR BUF?
JRST PTRXN3 ;YES
MOVE TT2,[POINT 7,EPTRBF] ;NO SET UP TO STORE IN PTR BUFFER
SETZM EPTRBF ;SWITCH FOR END OF TAPE TEST
CONO PTR,20 ;START PTR GOING
PTRXN1: CONSO PTR,400 ;EOT?
JRST PTRXN4 ;YES
CONSO PTR,10 ;DATA?
JRST PTRXN1 ;WAIT SOME MORE
DATAI PTR,T ;READ A CHAR
JUMPE T,PTRXN1 ;IGNORE NULLS
PTRXN2: IDPB T,TT2 ;SAVE IN DATA BUFFER
CAIE T,.CHLFD ;LF
CAMN TT2,EPTRND ; OR BUFFER FULL?
SKIPA TT2,[POINT 7,EPTRBF] ;YES. START TAKING CHARS OUT OF BUF
JRST PTRXN1 ;NO - READ ANOTHER
CONO PTR,0 ;SHUT OFF PTR BEFORE READING NEXT CHAR
PTRXN3: ILDB T,TT2 ;GET A CHAR
CAIE T,.CHLFD ;LF
CAMN TT2,EPTRND ; OR END OF BUFFER?
SETZ TT2, ;YES, START PTR FOR NEXT CHAR
MOVEM TT2,EPTPTR ;SAVE PNTR FOR NEXT CHAR
JRST CPOPJ1 ;HAVE A CHAR RETURN
;EOT
PTRXN4: SKIPN EPTRBF ;ANY DATA?
POPJ P, ;NO - DONE RETURN
SETZ T, ;YES - FILL REST OF BUFFER WITH 0'S
JRST PTRXN2
> ;END IFN FTEXEC
> ;END IFN FTYANK
> ;END IFN FTDEC10
;TTYCLR -- ROUTINE TO CLEAR ANY PENDING TTY INPUT
;CALL:
; PUSHJ P,TTYCLR
; RETURN
;
;DESTROYS R, T, TT2, AND T1 ON TOPS20
TTYCLR:
IFN FTEXEC,<
SKPUSR
JRST TTYCL6 ;SKIP CLEARING INPUT BUFFER AND ^O IF EXEC
> ;END IFN FTEXEC
IFN FTDEC10,<
SKPINL ;CLEAR ^O
JFCL ;(DON'T CARE)
CLRBFI ;CLEAR TYPEAHEAD
> ;END IFN FTDEC10
IFN FTDEC20,<
MOVEI T1,.PRIIN ;PRIMARY INPUT
RFMOD% ;GET MODES
TXZE T2,TT%OSP ;CLEAR ^O, SKIP IF WASN'T SET
SFMOD% ;^O WAS SET, CLEAR IT
CFIBF% ;CLEAR INPUT BUFFER
> ;END IFN FTDEC20
;HERE AFTER CLEARING ^O AND INPUT BUFFER TO EAT LAST PENDING CHAR, IF ANY.
TTYCL6: PUSHJ P,LISTEN
JFCL
POPJ P,0
SUBTTL TELETYPE IO LOGIC -- OUTPUT SUBROUTINES
;TSTRG -- SUBROUTINE TO TYPE OUT AN ASCIZ STRING.
;CALL:
; MOVEI W1,ADDRESS OF STRING
; PUSHJ P,TSTRG
; RETURN
;
;USES W1, T, TT2
TSTRG: HRLI W1,(POINT 7,) ;MAKE 7-BIT BYTE POINTER
CAIA ;ENTER LOOP
TSTRG3: PUSHJ P,TOUT ;TYPE THIS BYTE
ILDB T,W1 ;NEXT ASCII CHARACTER
JUMPN T,TSTRG3 ;IF NOT YET AT NULL KEEP TYPING
POPJ P, ;ALL DONE, RETURN
;Txxx ROUTINES -- ROUTINES TO TYPE COMMON CHARACTER(S) TO THE TTY.
;CALL:
; PUSHJ P,TCR/TCRLF ETC.
; RETURN
;
;USES T, TT2.
TBEL: MOVEI T,.CHBEL ;A <BEL> CHARACTER
PJRST TOUT ;GO TYPE IT OUT
TBSP: MOVEI T,.CHCNH ;A <BS> CHARACTER
PJRST TOUT ;GO TYPE IT OUT
TTAB: MOVEI T,.CHTAB ;A <TAB> CHARACTER
MOVX TT2,TT$SPC ;SPACE OR TAB BIT
TDNE TT2,TTYMSK ;SPACES OR TAB?
PJRST TOUT ;TAB, GO TYPE IT OUT
PUSHJ P,TSPC ;SPACES
PUSHJ P,TSPC ;SPACES
PJRST TSPC ;SPACES
TCRLF: PUSHJ P,TCR
TLF: MOVEI T,.CHLFD ;LINE FEED
PJRST TOUT
TCR: MOVEI T,.CHCRT ;A <CR> CHARACTER
PJRST TOUT ;GO TYPE IT OUT
TSPC: MOVEI T," " ;SPACE
PJRST TOUT
;TOUT -- SUBROUTINE TO CLEAR LINE INPUT BUFFER AND TYPE CHAR IN T
;TOUTB -- TOUT WITH CHARACTER IN AC B
;ECHO -- ENTRY POINT TO AVOID CLEARING LINE BUFFER FOR EXEC-MODE ECHOING
;ECHOB -- ECHO WITH CHARACTER IN AC B
;CALL:
; MOVEI T,CHAR ;OR MOVEI B,CHAR
; PUSHJ P,TOUT/ECHO ;OR TOUTB/ECHOB
; RETURN
;
;TOUT[B] IS THE ROUTINE TO CALL WHEN THE OUTPUT IS TO COUNT AGAINST
;THE HORIZONTAL CARRIAGE POSITION (I.E., THE CHARACTER IS REAL DDT
;OUTPUT). TOUT ALSO CLEARS THE COMMAND TYPEIN BUFFER.
;
;ECHO[B] IS THE ROUTINE TO CALL WHEN THE OUTPUT DOESN'T COUNT AGAINST
;THE HORIZONTAL CARRIAGE POSITION (I.E., THE CHARACTER WILL BE READ
;BY HIGHER-LEVEL ROUTINES AS A COMMAND CHARACTER (AND WILL GET COUNTED
;UP AT TIN).
;
;PRESERVES RIGHTMOST 7 BITS OF T, USES TT2
ECHOB: EXCH B,T ;CHARACTER TO BE ECHOED IS IN B
PUSHJ P,ECHO ;ECHO THE CHARACTER
EXCH T,B ;RESTORE AC T (AND B AS WELL)
POPJ P, ;RETURN
TOUTB: EXCH B,T ;CHARACTER TO BE OUTPUT IS IN B
PUSHJ P,TOUT ;OUTPUT THE CHARACTER
EXCH T,B ;RESTORE AC T (AND B AS WELL)
POPJ P, ;RETURN
TOUT: SETZM CHINP ;RESET INPUT LINE
SETZM CHINC
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;HERE TO CONVERT CONTROLS TO ^X, ESCAPES TO $, ETC.
ECHO:
TOUT0: CAIE T,.CHCRT ;CR OR LF?
CAIN T,.CHLFD
JRST TOUT4 ;YES, NO CONVERSION
CAIE T,.CHBEL ;BELL?
CAIN T,.CHCNH ;[210] OR BACKSPACE?
JRST TOUT4 ;NO CONVERSION
CAIE T,.CHTAB ;TAB?
JRST ECHO3 ;NO, LOOK FOR CONTROL CHARACTERS
PUSHJ P,SAVR ;NEED A SCRATCH AC FOR A MOMENT
MOVX R,TT$TAB ;TAB SIMULATION BIT
TDNE R,TTYMSK ;CAN TERMINAL HANDLE TABS?
JRST TOUT4 ;YES, OUTPUT LITERAL TAB
MOVEI R,7 ;MASK FOR TAB-ALIGNEDNESS
MOVEI T," " ;SPACE FOR TAB-FAKEDNESS
PUSHJ P,TOUT4 ;PRINT A SPACE
TDNE R,TOHPS ;REACHED A TAB-STOP YET?
JRST .-2 ;NO, KEEP SIMULATING
MOVEI T,.CHTAB ;TRUTH IN ADVERTISING (ETC.)
POPJ P, ;AND RETURN HAVING OUTPUT A <TAB>
ECHO3: CAIN T,.CHESC ;CONVERT ESC
JRST [PUSH P,T ;SAVE ORIG CHAR
MOVEI T,"$"
JRST TOUT3]
CAIL T," " ;CONTROL CHAR?
JRST TOUT4 ;NO
PUSH P,T ;YES, INDICATE
MOVEI T,"^" ;VIA ^x
PUSHJ P,TOUT4
MOVE T,(P) ;RECOVER ORIG CHAR
ADDI T,100 ;CONVERT TO PRINTING EQUIVALENT
;FALL INTO TOUT3
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;HERE TO TYPE CHAR IN T, RESTORE ORIG CHAR FROM STACK, AND RETURN
TOUT3: PUSHJ P,TOUT4 ;TYPE LITERAL CHARACTER
POP P,T ;RESTORE ORIGINAL
POPJ P, ;RETURN FROM TOUT/ECHO
TOUT4: ;OUTPUT THE CHARACTER
IFN FTEXEC,<
SKPUSR ;EXEC MODE?
JRST XTOUT ;YES, USE EXEC TYPEOUT ROUTINES
> ;END IFN FTEXEC
IFN FTDEC10,<
OUTCHR T ;OUTPUT A CHARACTER
> ;END IFN FTDEC10
IFN FTDEC20,<
EXCH T1,T
PBOUT% ;CHAR TO TTY FROM T1
EXCH T1,T
> ;END IFN FTDEC20
TOUT6: CAIN T,.CHTAB ;OUTPUT A <TAB>?
JRST TOUT7 ;YES, SPECIAL ADDITION
CAIN T,.CHCNH ;A <BS>?
JRST TOUT8 ;YES, NEGATIVE ADDITION
CAIE T,.CHLFD ;NO, HOW ABOUT A <LF>?
CAIN T,.CHBEL ;OR A <BEL>?
POPJ P, ;YES, DON'T CHANGE HORIZONTAL POSITION
CAIE T,.CHCNU ;A ^U (DOESN'T ECHO EVEN IN USER MODE)
CAIN T,.CHDEL ;A <DEL>?
POPJ P, ;YES, DON'T CHANGE HORIZONTAL POSITION
AOS TOHPS ;NO, ADVANCE ONE PRINTING CHARACTER
CAIN T,.CHCRT ;A <CR>?
SETOM TOHPS ;YES, BACK TO LEFT MARGIN
CAIGE T," " ;LEFT WITH A CONTROL CHARACTER?
AOS TOHPS ;YES, ACCOUNT FOR "^" FORM OF ECHO
; (THIS CAN ONLY HAPPEN IN USER MODE)
POPJ P, ;RETURN FROM TOUT/ECHO
TOUT7: MOVEI T,10 ;TABS MAY MOVE 8 SPACES
ADD T,TOHPS ;ACCOUNT FOR THAT MUCH
ANDCMI T,7 ;MAKE IT MOD 8 (SORT OF)
MOVEM T,TOHPS ;NEW CARRIAGE POSITION
MOVEI T,.CHTAB ;RESTORE T
POPJ P, ;RETURN
TOUT8: SOS TOHPS ;BACKSPACES MOVE BACKWARDS
POPJ P, ;RETURN
IFN FTEXEC,<
;HERE TO TYPE THE CHAR IN AC T IF IN EXEC MODE.
XTOUT: SKIPE TTSUP ;SUPPRESSING OUTPUT?
JRST XTOUT8 ;YES, JUST RETURN
;FIRST CHECK FOR KA/KI STYLE I/O
SKPKA ;ON A KA-10?
SKPNKI ;OR A KI-10?
CAIA ;YES TO ONE OF THE ABOVE
JRST XTOUT0 ;NO, TRY OTHERS
MOVE TT2,T ;WORKING COPY OF CHARACTER
IMULI TT2,200401 ;GENERATE PARITY
AND TT2,[11111111]
IMUL TT2,[11111111]
TLNE TT2,10
TRC T,200 ;MAKE PARITY EVEN
CONSZ TTY,20
JRST .-1
DATAO TTY,T
JRST XTOUT8 ;CLEAN UP AND RETURN
;CHECK TO SEE IF ON A KL10 AND DO KL10 XTOUT IF SO.
XTOUT0: SKPKL ;KL10?
JRST XTOUT2 ;NO, GO CHECK KS10
EXCH TT,TT2 ;SAVE TT
PUSHJ P,GVEPT ;GET EPT BASE IN TT
HALT . ;NOT IN ADDRESS SPACE!
EXCH TT,TT2 ;PUT ADDRESS IN TT2
MOVEI T,.DTMTO(T) ;GET MONITOR OUTPUT COMMAND AND CHAR IN T
MOVEM T,DTECMD(TT2) ;PUT IN COMMAND WORD
SETZM DTEMTD(TT2) ;CLEAR DONE FLAG.
XCT DING11 ;RING THE DOORBELL
SKIPN DTEMTD(TT2) ;DONE YET?
JRST .-1 ;NO, LOOP
JRST XTOUT8 ;YES, GO RESTORE CHAR AND RETURN
;STILL FTEXEC
;HERE IF NOT ON A KL10. CHECK TO SEE IF WE ARE ON A KS10.
XTOUT2: SKPKS ;KS-10?
JRST XTOUT4 ;NO, GO CHECK OTHERS
MOVE TT2,CTYOWD ;ON A KS10, GET OUTPUT ADDRESS
TXNN TT2,CTYORD ;OUTPUT READY?
JRST XTOUT3 ;YES
MOVE TT2,SAVAPR ;NO, GET APR STATE
ANDI TT2,7 ;GET PI ASSIGNMENT
WRAPR INT80(TT2) ;INTERRUPT 8080
XTOUT3: MOVE TT2,CTYOWD ;OUTPUT WORD
TXNE TT2,CTYORD ;OUTPUT READY?
JRST XTOUT3 ;NO WAIT
IORI T,CTYORD ;YES FLAG CHARACTER
MOVEM T,CTYOWD ;STORE CHARACTER FOR 8080
MOVE TT2,SAVAPR ;GET APR STATE
ANDI TT2,7 ;REDUCE TO PI ASSIGNMENT
WRAPR INT80(TT2) ;NUDGE 8080
JRST XTOUT8 ;GO RESTORE CHAR AND RETURN
;UNKNOWN PROCESSOR TYPE
XTOUT4: HALT . ;UNKNOWN PROCESSOR TYPE
;HERE TO RESTORE T AND RETURN FROM XTOUT.
XTOUT8: ANDI T,177 ;AND T DOWN TO ORIGINAL 7 BITS
JRST TOUT6 ;UPDATE COUNTERS
> ;END IFN FTEXEC
SUBTTL TELETYPE IO LOGIC -- SAVE/RESTORE
IFE FTFILE,<
;TTYRET -- SUBROUTINE TO SAVE USER TTY STATE ON RETURN TO DDT
;CALL:
; PUSHJ P,TTYRET
; RETURN
TTYRET: PUSHJ P,.CLCSH ;CLEAR THE CACHE, MAYBE
SETOM LASTPG ;DON'T KNOW ABOUT ANY PAGES
SETZM SYMVAL ;DON'T TRUST THE SYMBOL TABLE POINTERS
IFN FTEXEC,<
SKPUSR
JRST XTTYRE
> ;END IFN FTEXEC
IFN FTDEC10,<
MOVE T,[2,,W1] ;SENSE. UUO: 2 ARGS, IN W1 AND W2
MOVX W1,SIXBIT/TTY/ ;DEVICE TO READ STATUS OF IS TTY:
MOVE W2,[3,,A] ;MONITOR STORES STATUS IN A-C
SENSE. T,UU.PHY ;READ STATUS
JFCL ;OLD MONITOR?
SKIPN SAVTTY ;ALREADY SAVED?
HRROM B,SAVTTY ;REMEMBER STATUS, INSURE NON-ZERO
MOVE T,[2,,W1] ;CLRST. UUO: 2 ARGS, IN W1 AND W2
MOVX W1,SIXBIT/TTY/ ;DEVICE TO SET IS TTY:
SETZ W2, ;SET TO NORMAL (ZERO) STATUS (TURN ON ECHO ETC)
CLRST. T,UU.PHY ;DO IT
JFCL ;OLDER MONITOR?
MOVX W1,.TODIS ;THE TERMINAL-IS-A-DISPLAY CODE
SKIPN W2,TTDEV ;GOT AN $Y'ED TERMINAL?
SETO W2, ;NO, -1 := US
MOVE T,[2,,W1] ;TRMOP. ARG POINTER TO
TRMOP. T, ;READ DISPLAY MODE
SETZ T, ;???
DPB T,[POINTR TTYMSK,TT$DEL] ;SET <DEL> HANDLING
MOVEI T,1 ;TAB SUPPORT
DPB T,[POINTR TTYMSK,TT$TAB] ;SET <TAB> LITERAL MODE
> ;END IFN FTDEC10
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;FALL IN FROM ABOVE
IFN FTDEC20,<
MOVEI T1,.FHSLF
DIR%
SKIPE SAVTTY ;ALREADY SAVED?
JRST TTYRE4 ;YES, DON'T SAVE IT AGAIN
RTIW% ;GET INTERRUPT MASK
MOVEM T2,SAVTIW ;SAVE IT
MOVEI T1,.PRIIN
RFMOD% ;GET MODES
MOVEM T2,SAVTTY
RFCOC% ;GET CC MODES
DMOVEM T2,SAVTT2
MOVEI T1,1 ;TAB SIMULATION BIT
DPB T1,[POINTR TTYMSK,TT$TAB] ;MONITOR ALWAYS DOES TABS
TTYRE4: DMOVE T1,[EXP .FHSLF,0] ;NEW MASK FOR THIS FORK IS ZERO
STIW% ;SET NEW INTERRUPT MASK
MOVEI T1,.PRIIN ;TIME TO SETUP OUR TERMINAL
MOVE T2,SAVTTY ;GET OLD RFMOD% WORD
TXZ T2,TT%WAK+TT%DAM
TXO T2,<TT%WKF+TT%WKN+TT%WKP+TT%ECO+FLD(.TTASC,TT%DAM)>
SFMOD%
DMOVE T2,[BYTE (2) 1,1,1,1,1,1,1,2,1,2,2,1,1,2,1,1,1,1
BYTE (2) 1,1,1,1,1,1,1,1,1,3,1,1,1,1]
SFCOC% ;SETUP PROPER DDT MODES
> ;END IFN FTDEC20
IFN FTEXEC!FTMON,<JRST TTYRE6> ;GO CHECK HIDDEN SYMBOL PROCESSING
IFE FTEXEC!FTMON,<POPJ P,> ;ALL DONE WITH TTYRET
;STILL IFE FTFILE
IFN FTEXEC,<
;HERE TO SAVE TTY STATUS IF IN EXEC MODE.
XTTYRE: SETZM PAGVAL ;DON'T TRUST PAGING DATA
SETZM PAGVAS ;OR ALTERNATE PAGING DATA
SKPKL ;ON A KL-10?
JRST XTTYR6 ;NO, GO CHECK OTHER CPUS
;HERE IF ON A KL10. NEED TO FIND THE MASTER -11, SAVE ITS DTE STATE,
;AND THEN SAVE THE ACCOUNTING METERS IN THE EPT (MAY NEED TO BE IN SAVEG).
SKIPE SAVTTY ;PGM MODES IN EFFECT?
JRST XTTYR5 ;NO, DON'T SAVE
CONI MTR,MTRCNI ;SAVE MTR STATE
CONI TIM,TIMCNI ;SAVE TIM STATE
CONI PAG,T ;GET PAGING BITS
SETZM KIPAG ;CLEAR FLAGS TO RESET THEM
SETZM KLPAG ; . . .
TXNN T,1B21 ;1B21 = KL-PAGING
SETOM KIPAG ;IS KI-PAGING
TXNE T,1B21 ;1B21 = KL-PAGING
SETOM KLPAG ;IS KL-PAGING
MOVSI T,-DTEN ;POLL ALL DTES
MOVE W2,[CONSO DTE,DTERES] ;GET TEST WORD
MOVE W1,[CONSZ DTE,PI0ENB+7] ;TEST FOR PI0 ENABLED
; OR PI ASSIGNMENT UP
MOVE W,[CONO DTE,0] ;PROTOTYPE CONO
XTTYR1: XCT W1 ;PI 0 UP ON THIS GUY?
JRST XTTYR2 ;YES, CHECK TO SEE IF MASTER
HRRI W,PIENB+PI0ENB ;NO. SET PI0
XCT W ;CONO TO SET PI0
XCT W1 ;NOW UP?
TRZA W,PI0ENB ;YES, TURN OFF ZERO
JRST XTTYR3 ;NO. DOESN'T EXIST THEN
XCT W ;TURN PI 0 BACK OFF
XTTYR2: XCT W2 ;THIS THE MASTER?
JRST XTTYR4 ;YES, GO REMEMBER IT
XTTYR3: ADD W2,[1B9] ;NEXT DTE
ADD W,[1B9]
ADD W1,[1B9] ;ADJUST ALL I/O INSTRUCTIONS
AOBJN T,XTTYR1 ;POLL ALL OF THEM
HALT . ;WHAT CAN WE DO?
;CONTINUED ON NEXT PAGE
;STILL FTEXEC & NOT FTFILE
;CONTINUED FROM PREVIOUS PAGE
;HERE WHEN WE HAVE FOUND THE MASTER DTE
XTTYR4: MOVEI T,0(T) ;GET NUMBER OF MASTER DTE
MOVEM T,MSTRDT ;SAVE IT
LSH T,^D<35-9> ;POSITION CODE IN B9
ADD T,[CONO DTE,TO11DB] ;GET THE INSTRUCTION
MOVEM T,DING11 ;SAVE IT
EXCH TT,T ;SAVE TT
PUSHJ P,GVEPT ;GET EPT BASE IN TT
HALT . ;NOT IN ADDRESS SPACE!
EXCH TT,T ;PUT ADDRESS IN T
MOVE W2,MSTRDT ;GET MASTER'S NUMBER
LSH W2,3 ;HIS CHUNK
ADDB T,W2 ;THE POSITION IN THE EPT
MOVSI T,DTEII(T) ;START OF EPT LOCATIONS TO SAVE
HRRI T,SAVTTY ;WHERE TO SAVE THEM
BLT T,SAVDRW
SKIPN DTEEPW(W2) ;USING PRIMARY PROTOCAL?
JRST XTTYR5 ;NO. GO ON
MOVE T,MSTRDT ;GET MASTER'S ID
LSH T,^D<35-9> ;POSITION CODE IN B9
ADD T,[CONSZ DTE,TO11DB] ;GET TEST INSTRUCTION
XCT T ;WAIT FOR -11 TO ANSWER ALL DOORBELLS
JRST .-1 ;THE WAIT
XTTYR5: CONO MTR,MTRLOD+MTRTBF ;TURN OFF ALL METERS AND TIME BASE
CONO TIM,0 ;TURN OFF INTERVAL TIMER
MOVSI T,(HALT)
MOVEM T,DTEII(W2) ;NO INTERRUPTS
SETZM DTEEPW(W2) ;CLEAR EXAMINE PROTECTION WORD
MOVEI T,.DTMMC ;TURN ON SECONDARY TTY I/O SYSTEM
PUSHJ P,DTEDCM ;TELL THE -11 TO DO IT
JRST TTYRE6 ;GO CHECK HIDDEN SYMBOL PROCESSING
;STILL FTEXEC & NOT FTFILE
;HERE IF NOT ON A KL10. CHECK TO SEE IF ON A KS10.
XTTYR6: SKPKS ;ON A KS10?
JRST XTTYR8 ;NO, GO CHECK OTHER PROCESSORS
MOVE T,RLWORD ;GET KEEP ALIVE STATE
SKIPE SAVTTY ;ALREADY HAVE IT?
JRST XTTYR7 ;YES, DON'T SAVE AGAIN
MOVEM T,SAVTTY ;NO, SAVE IT
RDTIMS SAVTIM ;SAVE TIMEBASE
CONI PAG,TT1 ;GET PAGING BITS
TXNN TT1,1B21 ;1B21 = KL-PAGING
SETOM KIPAG ;IS KI-PAGING
TXNE TT1,1B21 ;1B21 = KL-PAGING
SETOM KLPAG ;IS KL-PAGING
XTTYR7: TXZ T,KPACT ;STOP KEEP ALIVE
MOVEM T,RLWORD ;TELL 8080
JRST TTYRE6 ;GO CHECK HIDDEN SYMBOLS
;NOT ON A KL10 OR A KS10. MUST BE ON A KA10 OR A KI10
XTTYR8: SKIPE SAVTTY ;ALREADY HAVE IT?
JRST XTTYR9 ;YES
CONI TTY,SAVTTY ;SAVE PI ASSMT
CONO TTY,0 ;SET PI ASSMT TO 0
MOVSI W2,1
CONSZ TTY,120 ;WAIT FOR PREVIOUS ACTIVITY TO FINISH
SOJG W2,.-1 ;BUT DON'T WAIT FOREVER
CONI TTY,W2 ;UPDATE STATUS BITS
DPB W2,[POINT 15,SAVTTY,32]
DATAI TTY,W2
HRLM W2,SAVTTY
XTTYR9: CONO TTY,3410 ;INIT TTY FOR DDT
JRST TTYRE6 ;GO CHECK HIDDEN SYMBOLS
> ;END IFN FTEXEC
;STILL IFE FTFILE
IFN FTEXEC!FTMON,<
;HERE TO INVESTIGATE WHETHER THE SYMBOL TABLE IS IN AN ALTERNATE
;ADDRESS SPACE OR NOT, AND SET UP TO SWITCH MAPS IN SYMSET IF SO.
TTYRE6:
IFN FTEXEC,<
SKPEXC ;IN EXEC MODE?
JRST TTYRE8 ;NO, DON'T LOOK AT .JBEDV
> ;END IFN FTEXEC
SETZM HSBLK ;DO ALL FETCHS IN CURRENT SPACE FOR NOW
MOVEI R,.JBEDV ;POINTER TO EXEC DATA VECTOR
PUSHJ P,FETCHV ;GET IT
JRST TTYRE8 ;NOT THERE
JUMPE T,TTYRE8 ;POINTER NOT SET UP
MOVE R,T ;POINT TO BLOCK
ADDI R,.EDCNT ;GET COUNT WORD
PUSHJ P,FETCHV ; . . .
JRST TTYRE8 ;ILLEGAL ADDRESS
TXC T,SIXBIT/EDV/ ;CHECK FIRST 3 CHARS FOR RIGHT VALUE
TLNN T,-1 ;ARE THEY 'EDV'?
CAIGE T,.EDHSF+1 ;YES, BUT IS THE BLOCK LONG ENOUGH?
JRST TTYRE8 ;NO, PRETEND WE DIDN'T SEE IT
ADDI R,.EDHSB-.EDCNT ;POINT TO HIDDEN SYMBOL SWAP BLOCK
PUSHJ P,FETCHV ;GET CONTENTS
JRST TTYRE8 ;NOT THERE
JUMPE T,TTYRE8 ;0 MEANS SYMBOLS NOT HIDDEN
MOVEM T,TTEM1 ;STORE ADDRESS OF BLOCK
;FALL INTO NEXT PAGE
;STILL IFE FTFILE AND IFN FTEXEC!FTMON
;FALL IN FROM ABOVE
IFN FTEXEC,<
;NOW LOOP OVER THE HIDDEN SYMBOL BLOCK, CHECKING ALL THE SUB-BLOCKS FOR
;LEGALITY.
MOVEM R,TTEM2 ;SAVE R FOR A WHILE
MOVE R,T ;ADDRESS OF BLOCK
PUSHJ P,FETCHV ;GET FIRST WORD (TOTAL COUNT)
JRST TTYRE8 ;NOT ACCESSIBLE
SUBI T,1 ;WE JUST PASSED ONE OF THE WORDS
;BACK HERE FOR EACH SUB-BLOCK
TTYRE7: MOVEM T,TTEM3 ;SAVE CURRENT COUNT
MOVE R,T ;CALCULATE POINTER TO NEXT BLOCK
SUBI R,3 ;OFFSET TO BEGINNING OF SUB-BLOCK
ADD R,TTEM1 ;ADDRESS OF NEXT SUB-BLOCK
PUSHJ P,FETCHV ;FIRST WORD OF SUB-BLOCK
JRST TTYRE8 ;NOT ACCESSIBLE
MOVE W,T ;SAVE COUNT
ADDI R,1 ;POINT TO HARDWARE BLOCK ADDRESS
PUSHJ P,FETCHV ;GET ADDRESS
JRST TTYRE8 ;NOT THERE
MOVE S,T ;SAVE IN S FOR A WHILE
ADDI R,1 ;POINT TO SYMBOL BLOCK ADDRESS
PUSHJ P,FETCHV ;GET ADDRESS
JRST TTYRE8 ;NOT THERE
MOVE W1,T ;SAVE IN W1
ADDI R,1 ;POINT TO SAVE BLOCK ADDRESS
PUSHJ P,FETCHV ;GET ADDRESS
JRST TTYRE8 ;NOT THERE
MOVE W2,T ;SAVE IN W2
;FALL INTO NEXT PAGE
;STILL IFE FTFILE AND IFN FTEXEC!FTMON AND IFN FTEXEC
;FALL IN FROM ABOVE
;NOW THAT WE HAVE THE ADDRESS OF EACH SUB-SUB-BLOCK, CHECK THEM OUT.
MOVE R,S ;PUT HARDWARE BLOCK ADDRESS IN R
MOVE S,W ;COUNT IN S
XMOVEI T,HSBITS ;VALIDATION ROUTINE
PUSHJ P,CHKRNG ;CHECK BLOCK
JRST TTYRE8 ;NO GOOD
MOVE R,W1 ;SYMBOL BLOCK ADDRESS IN R
MOVE S,W ;COUNT IN S
XMOVEI T,HSBITS ;VALIDATION ROUTINE
PUSHJ P,CHKRNG ;CHECK BLOCK
JRST TTYRE8 ;NO GOOD
MOVE R,W2 ;SAVE BLOCK ADDRESS IN R
MOVE S,W ;COUNT IN S
XMOVEI T,HSBITS ;VALIDATION ROUTINE
PUSHJ P,CHKRNG ;CHECK BLOCK
JRST TTYRE8 ;NO GOOD
MOVE T,TTEM3 ;GET CURRENT COUNT
SUBI T,3 ;BLOCKS ARE 4 WORDS LONG
SOJG T,TTYRE7 ;LOOP OVER ALL BLOCKS
MOVE R,TTEM2 ;ALL DONE, RESTORE R
> ;END IFN FTEXEC
ADDI R,.EDSYM-.EDHSB ;ADVANCE TO SYMBOL TABLE WORD
PUSHJ P,CHKADR ;MAKE SURE ACCESSIBLE
TXC TT,PG$EXI!PG$REA!PG$WRT ;COMPLEMENT BITS THAT MUST BE ON
TXNE TT,PG$EXI!PG$REA!PG$WRT!PG$SPY!PG$ABZ ;ADDR OK?
JRST TTYRE8 ;NO, ABORT
ADDI R,.EDUSY-.EDSYM ;POINT TO USY TABLE WORD
PUSHJ P,CHKADR ;MAKE SURE ACCESSIBLE
TXC TT,PG$EXI!PG$REA!PG$WRT ;COMPLEMENT BITS THAT MUST BE ON
TXNE TT,PG$EXI!PG$REA!PG$WRT!PG$SPY!PG$ABZ ;ADDR OK?
JRST TTYRE8 ;NO, ABORT
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE AND IFN FTEXEC!FTMON
;FALL IN FROM ABOVE
IFN FTEXEC,<
ADDI R,.EDHSF-.EDUSY ;POINT TO HIDDEN SYMBOL FLAG POINTER
PUSHJ P,FETCHV ;GET THE ADDRESS
JRST TTYRE8 ;NO GOOD
EXCH R,T ;SAVE IN T FOR A WHILE
PUSHJ P,CHKADR ;SEE ABOUT ADDRESS
TXC TT,PG$EXI!PG$REA!PG$WRT ;BITS THAT MUST BE ON
TXNE TT,PG$EXI!PG$REA!PG$WRT!PG$SPY ;IS BLOCK OK?
JRST TTYRE8 ;NO, DON'T USE IT
MOVEM R,ADRSPC ;SAVE FOR NEWSPC
SKIPE @ADRSPC ;HIT BREAKPOINT INSIDE OTHER COPY OF DDT
;WHILE THAT DDT WAS IN ALTERNATE SPACE?
SETZM TTEM1 ;YES, WE WILL ALWAYS STAY IN SYMBOL SPACE
EXCH R,T ;BACK TO OLD R
SUBI R,.EDHSF-.EDUSY ;BACK TO GOOD UNDEFINED POINTER
> ;END IFN FTEXEC
HRRM R,USYMP ;OK, SET UP TO USE THAT UNDEFINED POINTER
SUBI R,.EDUSY-.EDSYM ;BACK TO SYM WORD
HRRM R,SYMP ;SET UP TO USE IT
MOVE T,TTEM1 ;ADDRESS OF MONITOR'S BLOCK OR ZERO
MOVEM T,HSBLK ;*** TURN ON HIDDEN SYMBOL PROCESSING ***
POPJ P, ;DONE, RETURN FROM TTYRET
;HERE IF WE AREN'T GOING TO USE AN ALTERNATE SYMBOL ADDRESS SPACE.
TTYRE8: SETZM HSBLK ;REMEMBER NOT TO
MOVEI R,.JBSYM ;WHERE SYMBOL TABLE POINTER COMES FROM
HRRM R,SYMP ;STORE FOR SYMBOL TABLE ROUTINES
MOVEI R,.JBUSY ;WHERE UNDEFINEDS COME FROM
HRRM R,USYMP ;STORE
POPJ P, ;RETURN FROM TTYRET
IFN FTEXEC,<
;ROUTINE TO CHECK SUB-SUB HIDDEN SYMBOL BLOCKS FOR VALIDITY.
;CALLED FROM CHKRNG.
HSBITS: TXC TT,PG$EXI!PG$REA!PG$WRT ;BITS THAT MUST BE ON
TXNN TT,PG$EXI!PG$REA!PG$WRT!PG$SPY ;BITS THAT MUST NOW BE OFF
AOS (P) ;GOOD, GIVE OK RETURN
POPJ P, ;RETURN TO CALLER
> ;END IFN FTEXEC
> ;END IFN FTEXEC!FTMON
;STILL IFE FTFILE
;TTYLEV -- SUBROUTINE TO RESTORE THE TTY STATE BEFORE LEAVING DDT
;CALL:
; PUSHJ P,TTYLEV
; RETURN
TTYLEV:
IFN FTEXEC,<
SKPUSR
JRST XTTYLE
> ;END IFN FTEXEC
IFN FTDEC10,<
MOVE T,[2,,W1] ;CLRST. UUO: 2 ARGS, IN W1 AND W2
MOVX W1,SIXBIT/TTY/ ;DEVICE IS TTY:
HRRZ W2,SAVTTY ;RESTORE OLD SETSTS BITS
TRNE W2,-1 ;ANY STATUS TO [RE-]SET TO?
CLRST. T,UU.PHY ;DO IT
JFCL ;??
JRST TTYLE8 ;NOTE USER MODES AND RETURN
> ;END IFN FTDEC10
IFN FTDEC20,<
MOVEI T1,.PRIIN
MOVE T2,SAVTTY
SFMOD% ;RESTORE MODES
MOVE T2,SAVTT2
MOVE T3,SAVTT3
SFCOC% ;RESTORE CC MODES
MOVEI T1,.FHSLF
MOVE T2,SAVTIW ;RESTORE OLD TTY INTERRUPT MASK
STIW% ;DO IT
SKIPGE SAVSTS ;PSI SYSTEM ON FOR USER?
EIR% ;YES
JRST TTYLE8 ;NOTE USER MODES AND RETURN
> ;END IFN FTDEC20
;STILL IFE FTFILE
IFN FTEXEC,<
;HERE TO RESTORE USER STATE (LEAVE DDT) WHEN IN EXEC MODE.
XTTYLE: PUSHJ P,NORSPC ;GET BACK TO PROGRAM'S ADDRESS SPACE
SKPKL ;ON A KL-10?
JRST XTTYL2 ;NO, GO CHECK OTHER CPUS
;HERE IF ON A KL10. RESTORE THE DTE STATUS BLOCK STARTING AT DTEII,
;AND RESTORE THE ACCOUNTING AND TIMING METERS.
MOVE T,MSTRDT ;GET ID OF MASTER DTE
LSH T,3 ;FIND EPT CHUNK
EXCH TT,W2 ;SAVE TT
PUSHJ P,GVEPT ;GET EPT BASE IN TT
HALT . ;NOT IN ADDRESS SPACE!
EXCH TT,W2 ;PUT ADDRESS IN W2
ADDI W2,0(T) ;POINT TO BEGINNING OF EPT CHUNK
MOVEI T,DTEII(W2) ;WHERE TO DO RESTORE
HRLI T,SAVTTY ;WHERE TO RESTORE FROM
BLT T,DTEDRW(W2) ;UP THROUGH DEPOSIT, LAST WORD
HRRZ T,MTRCNI ;GET SAVED MTR CONI
CONO MTR,MTRLOD(T) ;RESTORE ALL STATES
HRRZ T,TIMCNI ;GET SAVED TIM CONI
TRZ T,TIMDON+TIMICO ;FLUSH CONI-ONLY BITS
CONO TIM,0(T) ;RESTORE STATE
SETZM SAVTTY ;NOTE PGM MODES NOW IN EFFECT
CONSZ PAG,1B22 ;IS PAGING NOW ENABLED?
SKIPN DTEEPW(W2) ;YES SECONDARY PROTOCOL IN EFFECT,
POPJ P, ;JUST RETURN, DON'T TURN IT OFF
MOVEI T,.DTNMC ;WE WERE IN REGULAR PROTOCOL, SETUP OFF COMMAND
;FALL INTO DTEDCM
;KL10 ROUTINE TO SEND A COMMAND TO THE MASTER 11 THROUGH THE DTE.
DTEDCM: EXCH TT,TT2 ;SAVE TT
PUSHJ P,GVEPT ;GET EPT BASE IN TT
HALT . ;NOT IN ADDRESS SPACE!
EXCH TT,TT2 ;PUT ADDRESS IN TT2
SETZM DTEFLG(TT2) ;CLEAR DONE FLAG
MOVEM T,DTECMD(TT2) ;STORE COMMAND FOR 11
XCT DING11 ;RING HIS DOORBELL
SKIPN DTEFLG(TT2) ;WAIT FOR FINISH
JRST .-1
POPJ P, ;RETURN
;STILL FTEXEC & NOT FTFILE
;HERE IF NOT ON A KL10. CHECK TO SEE IF ON A KS10.
XTTYL2: SKPKS ;ON A KS10?
JRST XTTYL4 ;NO, SKIP ON
DMOVE TT1,[EXP 0,1000] ;GET A LITTLE TIME
DADD TT1,SAVTIM ;BUMP TIME A LITTLE TO KEEP KEEP ALIVE ALIVE
WRTIMS TT1 ;WRITE NEW TIMEBASE
MOVE T,SAVTTY ;GET BACK KEEP ALIVE
MOVEM T,RLWORD ;RESTORE ORIGINAL STATE
JRST TTYLE8 ;NOTE USER MODES AND RETURN
;HERE IF NOT ON A FANCY CPU. MUST BE ON A KA10 OR KI10.
XTTYL4: CONSZ TTY,120 ;WAIT FOR LAST OUTPUT
JRST .-1
CONO TTY,1200 ;CLEAR DONE FLAGS
MOVE T,SAVTTY
CONO TTY,0(T) ;RESTORE USER STATE
;FALL INTO TTYLE8
> ;END IFN FTEXEC
;COMMON RETURN FROM TTYLEV
TTYLE8:
IFN FTEXEC,<
SKPEXC ;USER MODE?
HLLZS TTYMSK ;YES, CLEAR FANCY <DEL> HANDLING IN CASE
; WE LATER GET ENTERED AT EXEC LEVEL
> ;END IFN FTEXEC
SETZM SAVTTY ;NOTE USER MODES NOW IN EFFECT
POPJ P, ;RETURN TO CALLER
> ;END IFE FTFILE
SUBTTL STORAGE -- LITERALS AND END OF CODE
XLIST ;THE LITERALS
LIT
LIST
IFGE RUNLOC,<IFGE VARLOC,<IFL <VARLOC-RUNLOC>,<
DDTEND:>>> ;DEFINE HERE IF VARIABLES BELOW CODE
END.C: ;END OF CODE
LEN.C==END.C-BEG.C ;DEFINE HERE TO NOT CONFUSE MACRO
IFGE VARLOC,< ;IF VARIABLES WANT TO GO SOMEWHERE,
;WE NEED TO CLOSE OFF THE CODE
IFN FTEX20,<
.ENDPS INCOD ;CLOSE OFF -20 EDDT PSECT
>
IFGE RUNLOC,<
IFE FTEX20,<
.ENDPS DDTCOD ;CLOSE OFF USER CODE PSECT
>
>
;NOW START THE VARIABLES IN THE RIGHT PLACE
IFE FTEX20!FTMON,<
.PSECT DDTVAR/RWRITE,VARLOC ;PUT VARS WHERE THEY BELONG
>
>
IFN FTMON,<
PHVAR:! ;MDDT ONLY: PURE COPY OF VARIABLES
>
IFGE RUNLOC,<IFGE VARLOC,<IFL <VARLOC-RUNLOC>,<
DDTBEG:!>>> ;DEFINE HERE IF VARIABLES BELOW CODE
SUBTTL STORAGE -- ALLOCATION MACROS
;MACROS TO DEFINE DATA
IFE FTMON,< ;NORMAL DDTS
DEFINE DD(NAME,SIZE,CONTENTS)<
IFNB <NAME>,<
NAME:>
..DD==.
IFNB <CONTENTS>,<
IRP <CONTENTS>,<CONTENTS>>
BLOCK <SIZE>-<.-..DD>
> ;END OF DD DEFINITION
;SUPPRESSED DD
DEFINE DDS(NAME,SIZE,CONTENTS)<
IFNB <NAME>,<
NAME:!>
..DD==.
IFNB <CONTENTS>,<
IRP <CONTENTS>,<CONTENTS>>
BLOCK <SIZE>-<.-..DD>
> ;END OF DDS DEFINITION
> ;END IFE FTMON
IFN FTMON,< ;IN MDDT, THE TAGS ARE OFFSETS
;FROM DDTPGA.
..DDPC==0 ;HOW MANY LOCATIONS ALLOCATED SO FAR
DEFINE DD(NAME,SIZE,CONTENTS)<
IFNB <NAME>,<
NAME=DDTPGA+..DDPC>
..DDPC==..DDPC+<SIZE>
..DD==.
IFNB <CONTENTS>,<
IRP <CONTENTS>,<CONTENTS>>
BLOCK <SIZE>-<.-..DD>
> ;END OF DD DEFINITION
DEFINE DDS(NAME,SIZE,CONTENTS)<
IFNB <NAME>,<
NAME==DDTPGA+..DDPC>
..DDPC==..DDPC+<SIZE>
..DD==.
IFNB <CONTENTS>,<
IRP <CONTENTS>,<CONTENTS>>
BLOCK <SIZE>-<.-..DD>
> ;END OF DDS DEFINITION
> ;END OF IFN FTMON
SUBTTL STORAGE -- MISCELLANEOUS
DDS(BEG.V,0) ;BEGINNING OF VARIABLES
DD(NM1A,1,<<MOVEI W2,0>>)
DD(ACCCF,1,<<MOVEI T,.-.>>);LEFT HALF OF A,,B
DD(SEAXCT,1) ;XCT'ED BY SEAR2 IN [NOT]WORD SEARCH
DD(TOCS,1,<<MOVEI T,.-.>>);GET RIGHT HALF BACK
;WATCH COMMAND ($V) STORAGE
DD(WTCHA,1) ;ADDRESS BEING WATCHED
DD(WTCHC,1) ;COUNTER FOR WATCH CYCLES TILL NEXT LISTEN
DD(WTCHW,1) ;LAST WORD VALUE WATCHED
;VARIABLES FOR LINE BUFFER INPUT
DD(TTYMSK,1) ;[210] FANCY TTY HANDLING MASK
DD(TTDEV,1) ;$Y'ED TERMINAL (IF ANY)
IFN FTEXEC,<DD(TTSUP,1)> ;EXEC-MODE ^O SUPPRESSION FLAG
DD(CHINC,1) ;COUNT OF CHARACTERS
DD(WAKALL,1) ;NON-0 TO WAKEUP ON EVERYTHING
DD(ONES4,4,<-1,-1,-1,-1>);WAKEUP MASK
;*** DO NOT REORDER THE FOLLOWING ***
DD(TEXTIB,1,<10>) ;TEXTI ARG BLOCK - SIZE
IFN FTDEC20,<
DD(,1,<RD%BRK+RD%TOP+RD%PUN+RD%RND+RD%JFN+RD%BBG+RD%SUI>) ;FLAGS
DD(,1,<<.PRIIN,,.PRIOU>>) ;INPUT/OUTPUT JFNS
>
DD(CHINP,1) ;POINTER TO NEXT CHAR
DD(LINSPC,1) ;FREE SPACE COUNT
DD(LINDB,1,<<POINT 7,LINBF>>);BEGINNING OF BUFFER
DD(LINBP,1,<<POINT 7,LINBF>>);BEGINNING OF ^R BUFFER
DD(ETXTB,1) ;WAKEUP TABLE (ALL ONES)
DD(,1) ;BACKUP LIMIT POINTER
;***END OF "DO NOT REORDER" BLOCK***
IFN FTDEC10!FTEXEC,<
DD(SAVCHR,1) ;PRESET RESULT FOR NEXT CALL TO RDBIN
DD(LASCHR,1) ;ANSWER FROM LAST CALL TO RDBIN
>
NLINBF==^D20
DD(LINBF,NLINBF) ;LINE BUFFER
IFN FTYANK,<
IFN FTEXEC,<
DD(EPTPTR,1)
DD(EPTRBF,5) ;BUFFER SO PTR WONT CHATTER
DD(EPTRND,1,<<POINT 7,EPTRBF+4,34>>);PNTR FOR LAST CHAR IN BUF
> ;END IFN FTEXEC
DD(COMAND,1) ;.NE. 0 IF IN COMMAND FILE
DD(PTDFLG,1) ;EOF SEEN ON COMMAND FILE
YFLLEN==.FOLEB+1
DD(YFLBLK,YFLLEN) ;FILOP. BLOCK FOR COMMAND FILE
YLKLEN==.RBSIZ+1
DD(YLKBLK,YLKLEN) ;LOOKUP BLOCK FOR COMMAND FILE
YPTLEN==.PTPPN+5+2
DD(YPTBLK,YPTLEN) ;PATH BLOCK FOR COMMAND FILE
DD(YASWF,1) ;.NE. 0 THEN ABORT $Y ON COMMAND ERROR
DD(CBUF,3) ;COMMAND FILE BUFFER RING HEADER
DD(YBFBUF,YBFSIZ) ;BUFFER FOR READING COMMAND FILE
> ;END FTYANK
DD(TOHPS,1) ;"CARRIAGE" POSITION (FOR OUTPUT)
SUBTTL STORAGE -- $X LOGIC AND PATCH COMMAND
IFE FTFILE,<
;VARIABLES USED IN $X LOGIC
DD(I.PXC,1) ;-1 IF $X01 CALLED FROM $PX
DD(I.PXF,1) ;SAVED FLAGS IN $PX ROUTINE
DD(I.REP,1) ;$X REPEAT COUNTER
DD(I.LOG,1) ;$X COUNTER (FOR $P)
DD(I.NST,1) ;INSTRUCTION BEING EXECUTED
DD(I.NSTA,1) ;AC FIELD OF INST BEING EXECUTED
DD(I.NSTE,1) ;E FIELD OF INST BEING EXECUTED
DD(I.NEA2,1) ;SECOND EA (E.G., FOR BYTE POINTER)
DD(I.NSTP,1) ;PC (A LA JSP) OF INST BEING EXECUTED
DD(I.NPC,1) ;ORIGINAL USER PC OF INSTRUCTION
; (BEFORE LAST $X CYCLE)
DD(I.NJMP,1) ;UNCONDITIONAL (JRST, ETC.) JUMP ADDRESS
DD(I.NECJ,1) ;COPY OF ERCAL/ERJMP IF PRESENT
DD(I.NJR0,1) ;FIRST JRST INTERCEPT BLOCK WORD
DD(I.NJR1,1) ;SECOND . . . *****************************
DD(I.NJR2,1) ;THIRD . . . * NOTE THIS BLOCK ALSO USED *
DD(I.NJR3,1) ;FOURTH . . . * FOR INIT UUO SIMULATION *
DD(I.NJR4,1) ;FIFTH . . . *****************************
DD(I.KRCK,1) ;KS-10 KROCK TYPEOUT FLAG
DD(I.NXIT,1) ;DANGEROUS INSTRUCTION FLAG
DD(FLAGS,1) ;SAVES DDT FLAG REGISTER
DD(LOCSAV,1) ;SAVES LOCATION OF INST BEING EXECUTED
DD(SAFETY,1) ;SAVES T
DD(SAV0,1) ;SAVES AC 0 IN SWAP ROUTINE
DD(XCTS,1) ;XCT DEPTH COUNTER
> ;END FTFILE
;VARIABLES FOR PATCH COMMAND
DD(PTLOC,1) ;PATCH ADDRESS
DD(PTLLC,1) ;OLD LLOCO VALUE
DD(PTWRD,1) ;ORIGINAL WORD AT OLD LLOCO
DD(PTFIX,1) ;ADDRESS OF SYM TO FIX UP
DD(PTORG,1) ;-1 IF PTLOC FROM SYMBOL, 1 IF .JBFF, 0 NEITHER
DD(PTAFTR,1) ;[233] 0 IF BEFORE, -1 IF AFTER
DD(PTSYM,1) ;SYMBOL USED IN PATCHING
SUBTTL STORAGE -- BREAKPOINTS
IFE FTFILE,<
DD(XSAVE,1) ;FLAGS FOR 30-BIT SAVE PC
IF1,<PURGE SAVE> ;BYPASS MACRO BUG, SAVE IS A JSYS TOO
DD(SAVE,1) ;SAVE THE ACS AND PI SYSTEM
DD(,1,<JRST SAVEG>)
DD(BPT$B,0) ;START OF BREAKPOINT STORAGE
.PHASE 0 ;DEFINE TAGS RELATIVE TO ZERO
B$ADR:! DD(,1) ;.GT. 0 THEN ADDRESS OF BREAKPOINT
B$XCT:! DD(,1) ; CONDITIONAL BREAK INSTRUCTION
B$CNT:! DD(,1) ; PROCEED COUNT (BREAK WHEN 0)
B$OPN:! DD(,1,-1) ;.GE. 0 THEN ADDRESS TO OPEN ON BREAKPOINT
B$FLG:! DD(,1) ; BREAKPOINT FLAGS
BP$PRO==1B0 ; AUTO-PROCEED
B$INS:! DD(,1) ; USER INSTRUCTION WHEN USER RUNNING
B$BPT:! DD(,1) ; BREAKPOINT JSR'S TO HERE
B$JSR:! DD(,1,<JSR BCOM>) ; JSR BCOM
B$SIZ==.-B$ADR ;LENGTH OF BREAKPOINT BLOCK
.DEPHASE ;BACK TO NORMAL ADDRESSING
DD(,B$SIZ*NBP) ;STORAGE FOR REST OF BREAKPOINTS
DDS(BPT$E,0) ;LAST LOCATION + 1 USED BY BREAKPOINTS
;$0BPT IS A GLOBAL LOCATION WHICH ANY USER PROGRAM MAY USE (JSR TO) IN
;ORDER TO CAUSE AN UNSOLICITED BREAKPOINT TO OCCUR (RATHER THAN MERELY
;JRST'ING TO DDT## - THE JSR TO $0BPT IS $P'ABLE). ALSO, OPERATING SYS-
;TEMS MAY UTILIZE THIS ENTRY POINT TO ENABLE USERS TO ARBITRARILY BREAK
;PROGRAM EXECUTION AND ENTER DDT IN A PROGRAM-CONTINUABLE FASHION.
$0BPT==BPT$B+B$BPT
IFE FTMON,<INTERN $0BPT>
DD(BCOM,1) ;BREAKPOINTS JSR TO HERE FIRST
DD(,1,<JRST BCOMG>) ;BCOMG DOES ALL THE REAL WORK
DD(XLEAVE,1) ;PC FLAGS FOR NON-ZERO SECTION ON BREAKPOINT
DD(LEAVE,1) ;PC ON BREAKPOINT TO GO TO IXCT8
DD(BPTIP,1) ;.NE. 0 IF BREAKPOINT IN PROGRESS ($P LEGAL)
DD(BPTDX,1) ;BREAKPOINT INDEX (NUMBER TIMES B$SIZE)
DD(SWTEM,1) ;TEMP FOR SWAP (HOLDS REGISTER T)
DD(XSWAP,1) ;30-BIT PC FLAGS FOR SWAP
DD(SWAP,1)
DD(,1,<JRST SWAPG>)
> ;END IFE FTFILE
DD(SVBTS,1) ;BYTE MASK FOR $O TYPEOUT
DD(OLDAR,1)
DD(PSVBTS,2) ;SAVE BLOCK FOR ABOVE 2 ON $$O
DD(BYTMSK,1) ;[235] $3M BYTE MASK
SUBTTL STORAGE -- SYMBOL TABLE LOGIC
DD(PNTR,1,<Z INST>) ;POINTER TO BITS IN INST
DD(INST,1) ;BINARY FOR INSTRUCTION
DD(CHP,1) ;CHAR POINTER INTO OPTXT, OPTXT+1
DD(OPTXT,2) ;STORE INPUT TEXT FOR OPEVAL
DD(SAVPDL,1) ;SAVE PUSH DOWN LIST POINTER
DD(WRD,1)
DD(WRD2D,1) ;QUANTITY AFTER $ IN DECIMAL
DD(WRD2O,1) ;QUANTITY AFTER $ IN OCTAL
DD(PRNC,1)
DD(FRASE,1) ;DONT CHANGE ORDER, SEE WORD+6
DD(SYL,1)
DD(LWT,1)
DD(SYM,1)
DD(FRASE1,1)
DD(DEN,1)
DD(SAVHSM,1) ;C(.JBHSM), USED BY EVAL, LOOK
DD(SEGNAM,1) ;THE HIGH SEGMENT NAME (OR 0)
;WHEN $: IS SUCCESSFULLY DONE
DD(PRGM,1) ;$:'D MODULE POINTER
; (SYMBOL INDEX TO 2ND WORD)
DD(SYPTR,1) ;BASE OF CURRENT SYMTAB OR WINDOW (R)
DD(SY2GO,1) ;NUMBER OF SYMBOLS LEFT IN CURRENT TABLE
DD(R2IDX,1) ;OFFSET TO MAKE R A SYMBOL INDEX
DD(EVFLG,1) ;FLAGS OF CURRENT SYMBOL IN EVAL
DD(EVVAL,1) ;VALUE OF CURRENT SYMBOL IN EVAL
DD(EVIDX,1) ;SYMBOL INDEX OF CURRENT SYMBOL IN EVAL
DD(LKFLG,1) ;FLAGS OF CURRENT SYMBOL IN LOOK
DD(LKVAL,1) ;VALUE OF CURRENT SYMBOL IN LOOK
DD(LKIDX,1) ;SYMBOL INDEX OF CURRENT SYMBOL IN EVAL
DD(LKMAX,1) ;THE HIGHEST KNOWN VALUE SUCH THAT THE
;FOUND SYMBOL WILL STILL BE USED FOR IT
IFN FTMON,<
DD(CT2GO,1) ;NUMBER OF WORDS LEFT TO BE WINDOWED
DD(SYWIN,1) ;BASE OF OUR SYMBOL WINDOW
> ;END IFN FTMON
DD(ESTUT,1)
DD(FSV,1)
DD(FH,1)
IFE FTFILE,<
IFN FTDEC10,<
DD(SYMP,1,<IFIW .JBSYM>);POINTS TO LOW SEG SYM TABLE POINTER
DD(USYMP,1,<IFIW .JBUSY>);POINTS TO UNDEF SYM TABLE POINTER
>
IFN FTDEC20,<
IFN FTEXEC!FTMON,<
DD(SYMP,1,<IFIW .JBSYM>)
DD(USYMP,1,<IFIW .JBUSY>)
>
IFE FTEXEC!FTMON,<
DD(SYMP,1,<IFIW DDSYM>)
DD(USYMP,1,<IFIW DDUSY>)
>>>
IFN FTFILE,<
DD(SYMP,1,<IFIW FISPTR>)
DD(USYMP,1,<IFIW FIUPTR>)
>
IFN FTEXEC!FTMON,<
DD(HSBLK,1) ;0 IF SYMBOLS NOT HIDDEN, ELSE BLOCK ADDRESS
> ;END IFN FTEXEC!FTMON
;SYMBOL TABLE CACHE DATA:
DD(SCNUM,1) ;NUMBER OF SYMBOLS IN THE CACHE
DD(SCTIM,1) ;TIME COUNTER FOR SETTING AGES OF SYMBOLS
DD(SCTMP,1) ;INDEX TO USE FOR A NEW SYMBOL
DD(SCSYM,SCSIZ) ;SYMBOLS IN THE CACHE
DD(SCIDX,SCSIZ) ;INDEX INTO SYMBOL TABLE FOR THIS SYMBOL
DD(SCVAL,SCSIZ) ;VALUES OF THE SYMBOLS
DD(SCMAX,SCSIZ) ;MAXIMUM VALUES SYMBOLS ARE GOOD FOR
DD(SCAGE,SCSIZ) ;AGE OF EACH SYMBOL
SUBTTL STORAGE -- ADDRESSING DATA
DD(SPSAV,1) ;POINTER TO LAST SYMBOL TYPED
DD(LLIMIT,1) ;LOWER LIMIT WORD (SEARCHES, ETC)
; ALSO VALUE FOR DEFINING SYMBOL
DD(ULIMIT,1) ;UPPER LIMIT WORD (SEARCHES, ETC)
DD(LLOC,1) ;LAST LOCATION (E.G., LOCATION/, ETC.)
DD(LLOCO,1) ;LAST LOCATION OPEN
DD(SAVLP,1) ;POINTER TO SAVLOC TABLE
DD(SAVLTB,NSAVTB) ;SAVLOC (PC RING BUFFER) TABLE (FOR $<CR> ETC.)
DD(TENSYM,1) ;HOLDS TENTATIVE VALUE WHEN EVAL'ING SYMBOLIC OP
DD(SKPCT,1) ;SKIP COUNT FOR XCT
DD(LASEAF,1) ;LAST WORD USED IN EFFECTIVE ADDRESS CALCULATION
DD(UBASE,1) ;RELOCATION BASE ADDED TO USER ADDRESS
DD(UPROT,1,<<377777,,777777>>);PROTECTION LIMIT FOR USER ADDRESS
;ORDER OF PATCH? ENTRIES IS CRITICAL!!!!!
DD(PATCHS,1,<<FTDEC10&<^-FTFILE>>>);-1 IF PATCHING ENABLED
; DEFAULT ON FOR TOPS10 ^-FILDDT
; DEFAULT OFF FOR TOPS20
DD(PATCHC,1,<FTDEC20>) ;-1 IF AUTO-PAGE-CREATE
; DEFAULT OFF FOR TOPS10
; DEFAULT ON FOR TOPS20
PAMAX==2 ;MAX INDEX FOR $[$]NW
DD(LASTPG,1) ;LAST PAGE ADDRESS REFERENCED
DD(LASTAC,1) ;PAGE ACCESS BITS FOR LASTPG
;STORAGE FOR SAVFL TO RESTORE FLAGS AFTER PAGE FAULT
DD(SATEM1,1) ;FLAGS IN NON-0 SECTIONS
DD(SATEM2,1) ;PC OR FLAGS,,PC
;STORAGE FOR RESTOR
DD(RSTM1,1) ;NON-ZERO IF ENTERED AT RESTRX
;STORAGE FOR TTYRET
DD(TTEM1,1) ;TENTATIVE HSBLK
DD(TTEM2,1) ;SAVED R
DD(TTEM3,1) ;TOTAL BLOCK COUNT
SUBTTL STORAGE -- SAVE AREAS FOR PREVIOUS CONTEXT
;SAVED CPU STUFF - AVAILABLE VIA $I "ADDRESS". ALTHOUGH THE APR AND
;PI CONTEXTS ARE MEANINGFUL ONLY TO EDDT ALL WORDS ARE PRESENT IN
;ALL FLAVORS OF DDT SO THAT $I MAY SOMEDAY BE MADE TO WORK MEANING-
;FULLY EVEN IN FILDDT.
DD(SAVPI,1) ;($I+00) SAVED (CONI) PI IN EXEC MODE
DD(,1,1177) ;($I+01) PI CHANNELS TURNED OFF BY EDDT
DD(SAVAPR,1) ;($I+02) SAVED (CONI) APR IN EXEC MODE
DD(PCFLG,1) ;($I+03) SAVED PC FLAGS
DD(PCWRD,1) ;($I+04) SAVED PC WORD (A LA JSR)
DD(EPTWRD,1) ;($I+05) EXEC PROCESS TABLE PAGE NUMBER
DD(UPTWRD,1) ;($I+06) USER PROCESS TABLE PAGE NUMBER
DD(CSTWRD,1) ;($I+07) CST BASE ADDRESS (VIRTUAL)
DD(SPTWRD,1) ;($I+10) SPT BASE ADDRESS (VIRTUAL)
;STATE VARIABLES SUCH AS EXEC-MODE FLAG AND CPU-TYPE
;
;ALTHOUGH ONLY SET FROM EXEC-MODE DDT THESE VARIABLES ARE ALWAYS
;PRESENT SO THAT IN THE FUTURE EVEN FILDDT MAY BE ABLE TO UTILIZE
;THEM (FOR LOOKING AT CRASHES, ETC.).
DD(SECDDT,1) ;SECTION IN WHICH DDT IS RUNNING,,0
DD(USRFLG,1) ;.LT. 0 IF IN USER MODE (EXEC DDT ONLY)
DDS(BZ$FLG,0) ;START OF FLAGS TO BE CLEARED ON ENTRY
DD(KAFLG,1) ;.NE. 0 IF CPU IS KA-10
DD(KIFLG,1) ;.NE. 0 IF CPU IS KI-10
DD(KLFLG,1) ;.NE. 0 IF CPU IS KL-10
DD(KSFLG,1) ;.NE. 0 IF CPU IS KS-10
DD(KLSFLG,1) ;.NE. 0 IF CPU IS KL-10 OR KS-10
DD(KIPAG,1,<FTDEC10>) ;.NE. 0 IF KI-PAGING
DD(KLPAG,1,<FTDEC20>) ;.NE. 0 IF KL-PAGING
DDS(ZZ$FLG,0) ;END OF FLAGS TO BE CLEARED
;SOME TEMPORARIES FOR FV??? ROUTINES
IFN FTEXEC,<
DD(FVTEM1,1)
DD(FVTEM2,1)
DD(FVTEM3,1)
> ;END OF IFN FTEXEC
;STATE VARIABLES FOR $U COMMANDS
DD(ACWRD,1) ;DATAO PAG, TO SET OLD AC BLOCK BACK
DD(FAKEAC,1) ;NON-ZERO TO USE FAKE 0-17
DD(FAKEAD,1) ;LAST ADDRESS SPECIFIED IN $5U
DD(MAPFN,1) ;FLAGS,,FUNCTION WHEN $U MAPPING IN EFFECT:
; WHOLE WORD NEGATIVE IF PHYSICAL ADDRESSING
; 1B1 MEANS CONTENTS OF MAPPG IS SPT OFFSET
; FUNCTIONS ARE DEFINED IN PFNDSP AND MFNDSP
DD(MAPPG,1) ;DATA PER MAPFN, PAGE # OR SPT OFFSET
;THESE LOCATIONS MUST BE IN ORDER - THEY ARE USED TO SAVE AND
;RESTORE THE STATE OF DTE FOR KL10
DD(SAVTTY,1) ;**** MUST BE IN ORDER
IFN FTEXEC,<
;KL10 SAVE LOCATIONS
DD(SAVUNS,1)
DD(SAVEPW,1)
DD(SAVERW,1)
DD(SAVDPW,1)
DD(SAVDRW,1) ;**** END OF MUST BE IN ORDER BLOCK
DD(MTRCNI,1) ;RESULT OF CONI MTR,
DD(TIMCNI,1) ;RESULT OF CONI TIM,
DD(MSTRDT,1) ;ID OF MASTER -11
DD(DING11,1) ;PROTOTYPE CONO WORD FOR DTE
;KS10 SAVE LOCATIONS
DD(SAVTIM,2) ;SAVED TIME BASE
> ;END IFN FTEDDT
IFN FTDEC20,<
DD(SAVTT2,1) ;SAVED RFCOC% WORDS
DD(SAVTT3,1)
DD(SAVTIW,1) ;SAVED TERMINAL INTERRUPT MASK
DD(SAVSTS,1) ;SAVED PSI STATE
> ;END IFN FTDEC20
DD(MSK,1,-1) ;INITIAL SEARCH MASK
IFE FTFILE,<
DD(SYMVAL,1) ;NON-ZERO IF WE TRUST @USYMP ETC.
> ;END IFE FTFILE
IFN FTEXEC,<
DD(PAGVAL,1) ;NON-ZERO IF WE TRUST ???WRD
;WE ALWAYS TRUST ???WRD IN NON-EDDTS
DD(PAGVAS,1) ;IF SAVED PAGING DATA IS VALID
DD(EPTWRS,1) ;SAVED EPTWRD IN OTHER SPACE
DD(UPTWRS,1) ;SAVED UPTWRD IN OTHER SPACE
DD(SPTWRS,1) ;SAVED SPTWRD IN OTHER SPACE
DD(CSTWRS,1) ;SAVED CSTWRD IN OTHER SPACE
DD(ADRSPC,1) ;NON-ZERO IF IN SYMBOL SPACE
> ;END OF IFN FTEXEC
DD(AC0,17) ;STORAGE FOR FAKE 0 - 17
DD(AC17,1) ; . . .
SUBTTL STORAGE -- STATE VARIABLES
DD(SCHM,1,<EXP PIN>) ;DO NOT CHANGE ORDER
DD(ARM,1,<EXP PADSO>)
DD(ODFM,1,<EXP 10>)
DD(SCHR,1) ;CELLS TO STORE TYPEOUT MODES AT START
DD(ARR,1) ; OF COMMAND, IN CASE REPARSE NEEDED
DD(ODFR,1) ;** DO NOT CHANGE ORDER OF THESE 3 **
DD(SARS,1)
DD(TEM,1)
DD(TEM1,1)
DD(SYMOFS,1,<EXP ADRNGE>);[234] RANGE FOR SYMBOL+OFFSET TYPEOUT
IFN FTEXEC,<
DD(XNXTCH,1) ;PRESET INPUT CHAR AT XLISTE
> ;END IFN FTEXEC
IFN FTDEC10,< ;SUNDRY TOPS-10 STUFF
DD(MYPPN,1) ;USED BY FSCAN
DD(FSBLK,1) ;.NE. 0 IF FSCAN SAW SOMETHING EXCITING
DD(FSDEV,1) ;DEVICE
DD(FSFIL,1) ;FILENAME
DD(FSEXT,1) ;FILETYPE
DD(FSPPN,1) ;FILE PPN
DD(FSSFD,5) ;FILE PATH SFD'S
FSLEN==.-FSBLK ;LENGTH OF AREA FOR FSCAN TO CLEAR
> ;END IFN FTDEC10
SUBTTL STORAGE -- FILDDT
IFN FTFILE,< ;FILDDT STUFF
DDS(FWAZER,0) ;START OF AREA TO ZERO
IFN FTDEC10,< ;TOPS-10 SPECIFIC FILDDT STUFF
FLPLEN==.FOLEB+1 ;LENGTH OF FILOP. BLOCK
DD(FLPBLK,FLPLEN) ;FILOP. BLOCK
LKPLEN==.RBSIZ+1 ;LENGTH OF LOOKUP BLOCK
DD(LKPBLK,LKPLEN) ;LOOKUP BLOCK
PTHLEN==.PTPPN+5+2 ;LENGTH OF PATH BLOCK
DD(PTHBLK,PTHLEN) ;PATH BLOCK
DSKLEN==.DCUSZ+1 ;LENGTH OF DSKCHR BLOCK
DD(DSKBLK,DSKLEN) ;DSKCHR BLOCK (FOR /U)
DD(POKBLK,3) ;FOR POKE'ING THE MONITOR
> ;END OF IFN FTDEC10
IFN FTDEC20,< ;TOPS-20 SPECIFIC FILDDT STUFF
DD(SAVRET,1) ;RETURN ADDRESS OF CMDINI CALLER
DD(SAVREP,1) ;SAVED STACK POINTER TO RESTORE ON REPARSE
DD(CMDBLK,.CMGJB+5) ;COMMAND STATE BLOCK FOR COMND JSYS
DD(BUFFER,BUFSIZ) ;INPUT TEXT STORED HERE
DD(ATMBFR,ATMSIZ) ;ATOM BUFFER FOR COMND JSYS
DD(NOIFDB,FDBSIZ) ;FUNCTION DESCRIPTOR BLOCK FOR NOISE WORDS
> ;END OF IFN FTDEC20
;STILL FTFILE
DD(LBUF,3)
DD(SYMGOT,1) ;SYMBOL TABLE CAME FROM CURRENTLY OPEN FILE
DD(FILING,1) ;-1 IF FILE I/O; 0 IF PEEK AT RUNNING MONITOR
DD(FDIDSW,1) ;[207] "/D" TYPED IF .NE. 0
DD(FDIFSW,1) ;-1 IF "/F" TYPED
DD(JOBING,1) ;.NE. 0 THEN JOB NUMBER RATHER THAN MONITOR
DD(FDIMSW,1) ;-1 IF "/M" TYPED
DD(CHGSFL,1) ;CHANGED SYMBOL TABLE
DD(WINNUM,1) ;WINDOW TO READ OR WRITE
DD(WINTT1,1) ;TEMP HOLD OF TT1 (WINDOW NUMBER)
DD(WINTT2,1) ;TEMP HOLD OF TT2 (FILE PAGE NUMBER)
DD(WINDIR,WINMAX) ;MODIFIED BIT FOR MEMORY WINDOW
DD(MAXSIZ,1) ;HIGHEST LOC (+1) IN MONITOR OR FILE
;(USED SO WE WON'T EXAMINE PAST END)
DD(JOBHSO,1) ;START OF HISEG IN .EXE FILE
DD(LSTNPG,1) ;LAST XLATED PAGE IN CHKADR
DD(EXEFMT,1) ;.NE. 0 IF FILE IS IN .EXE FORMAT
;STILL FTFILE
DDS(FCMZER,0) ;HERE TO LWAZER CLEAR ON EVERY TOPS-20
IFN FTDEC20,< ;PROMPT.
DD(GJFBLK,GJFSIZ) ;GTJFN BLOCK FOR COMND JSYS
DD(NAMBUF,50) ;BUFFER FOR NAME OF INPUT FILE
DD(FILJFN,1) ;JFN OF OPEN FILE
DD(PHYSTR,1) ;DEV DESIGNATOR OF STRUCTURE ON /U
DD(STRBUF,2) ;STORAGE FOR STRUCTURE NAME
DD(ALIBUF,2) ;STORAGE FOR STRUCTURE ALIAS
MBLKL==.MSRSU+1 ;LENGTH OF MSTR BLOCK
DD(MBLK,MBLKL) ;MSTR ARG BLOCK
> ;END IFN FTDEC20
DD(SYMGET,1) ;-1 IF /S, 0 IF NOT
DD(PHYSIO,1) ;DSKOP ARG (T1) IF SUPER I/O (-1 ON -10)
DDS(LWAZER,0) ;END OF AREA TO ZERO + 1
DDS(FWAONE,0) ;START OF AREA TO ONE
DD(DEPNCT,1) ;COUNT OF POKE FAILURES
DD(WINFPN,WINMAX) ;FILE PAGE NUMBER FOR THIS WINDOW
DDS(LWAONE,0) ;END OF AREA TO SET TO -1
DD(WIND0,1) ;BASE ADDRESS OF WINDOW BUFFER AREA
DD(FISBEG,1) ;FIRST LOC OF FILDDT'S COPY OF SYMS
DD(FISEND,1) ;LAST LOC
DD(FISCNT,1) ;NUMBER OF SYMBOLS FILDDT FOUND
DD(FISPTR,1) ;POINTER TO SYMBOLS
DD(FIUPTR,1) ;POINTER TO UNDEF SYMS
DD(FOSPTR,1) ;FISPTR ON FILDDT STARTUP
DD(FOUPTR,1) ;FIUPTR ON FILDDT STARTUP
DD(OLDHSM,1) ;SAVHSM ON FILDDT STARTUP
DD(PAGTBL,1) ;PTR TO .EXE DIRECTORY
;1 WORD FOR EVERY VIRT. PAGE
;BITS 0-4 .EXE FORMAT FLAGS
;RH - FILE PAGE NUMBER
DD(PGTLEN,1) ;LENGTH OF PAGTBL (HIGHEST PAGE+1)
> ;END IFN FTFILE
SUBTTL STORAGE -- PUSH DOWN LIST
DD(XPDL,1) ;USED TO STORE RET FOR TOP-LEVEL POPJ'S
DD(PDL,LPDL-1) ;STORAGE FOR PUSH DOWN LIST
IFN FTDEC20&<^-FTEXEC>,<
DDS(VAREND,0) ;END OF INITIALIZED VARIABLES AREA
DD(DDSYM,1) ;SYMTAB PTR (COPIED FROM .JBSYM USUALLY)
DD(DDUSY,1) ;UNDEF SYMTAB PTR (COPIED FROM .JBUSY " )
IFN FTMON,<
DD(SETRT1,1) ;SCRATCH FOR VARIABLE INITIALIZATION
>>
DDS(END.V,0) ;END OF VARIABLES
IFGE RUNLOC,<IFGE VARLOC,<IFL <VARLOC-RUNLOC>,<
;>>> DDTEND: ;DDTEND GOES HERE UNLESS WE'RE SURE
;THAT VARIABLES ARE BELOW CODE
IFE FTMON,<
LEN.V==END.V-BEG.V ;LENGTH OF VARIABLE AREA
> ;END IFE FTMON
IFN FTMON,<
LEN.V==.-PHVAR ;AVOID E ERROR IN PRINTX
> ;END IFN FTMON
DEFINE PRROOM(WORDN,AREAN),<
IF2,<
PRINTX [WORDN words left in AREAN area]
>
>
DEFINE PRFULL(WORDN,AREAN),<
IF2,<
PRINTX ? The AREAN area has overflowed by WORDN words
>
>
RADIX 10
IFN <<VARLOC+1>!FTMON>,<
VARSPC==NDDTPG_PG2WRD-LEN.V ;ROOM IN DATA PAGE
IFGE VARSPC,< PRROOM(\VARSPC,<data>) >
IFL VARSPC,< PRFULL(\<-VARSPC>,<data>) >
>
IFGE RUNLOC,<IFE FTMON,<
IFGE <VARLOC-RUNLOC>,<CODSPC==VARLOC-<RUNLOC+LEN.C>> ;ROOM TILL DATA
IFL <VARLOC-RUNLOC>,<CODSPC==^O1000000-<RUNLOC+LEN.C>> ;ROOM TILL END
IFGE CODSPC,< PRROOM(\CODSPC,<code>) >
IFL CODSPC,< PRFULL(\<-CODSPC>,<code>) >
>>
RADIX 8
;THE FOLLOWING DEFINES CERTAIN SYMBOLS RELEVANT TO HARDWARE OR TO
;DDT ITSELF. THESE ARE *NOT* NEEDED FOR THE ASSEMBLY OF DDT AND
;IN FACT MAY BE IN CONFLICT WITH DEFINITIONS WHICH ARE USED
;DURING ASSEMBLY (E.G. TTY). HENCE, THESE DEFINITIONS ARE ASSEMBLED
;LAST AND ON PASS 2 ONLY. THE SYMBOLS ARE ALL DECLARED INTERNAL
;SO THAT THEY WILL BE KEPT IN THE PROGRAM SYMBOL TABLE AFTER
;LOADING. THESE SYMBOLS ARE THEN USED DURING DDT INSTRUCTION
;ASSEMBLY OR DEASSEMBLY ONLY.
IF2,< ;ONLY DEFINE GLOBALS PASS 2
IFE FTFILE,< ;NOT NEEDED IN FILDDT
IFE FTDBUG,< ;ONLY DEFINE GLOBALS FOR REGULAR DDTS
DEFINE XP (SS,VV)<
PURGE SS ;AVOID MACRO BUG
SS=:VV ;DEFINE
>
IFE FTMON,< ;[265] AVOID MULT. DEF. GLOBALS WITH KDDT, MDDT
;DEFINE $ SYMBOLS INTERNAL TO DDT
RADIX 10
DEFINE DBPNT (Z.)<XP $'Z.'B,<BPT$B+<B$SIZ*Z.>>>
ZZ==-1
REPEAT NBP+1,<DBPNT \<ZZ==ZZ+1>>
RADIX 8
XP $M,<MSK>
XP $I,<SAVPI>
> ;[265] END IFE FTMON
> ;END IFE FTDBUG
;DEFINE I/O DEVICE MNEMONICS
IFN FTEXEC,<
IFE FTDEC20,< ;CONFLICTS WITH TOPS-20 DEFINITION OF PI, ETC.
XP PI,004B11
XP PAG,010B11
XP CCI,014B11
XP DLB,060B11
XP DLC,064B11
XP CLK,070B11
XP PTP,100B11
XP PTR,104B11
XP CDP,110B11
XP CDR,114B11
XP TTY,120B11
XP LPT,124B11
XP DIS,130B11
XP PLT,140B11
XP CR,150B11
XP DSK,170B11
XP DTE,200B11
XP UTC,210B11
XP UTS,214B11
XP MTC,220B11
XP MTS,224B11
XP MTM,230B11
XP DLS,240B11
XP DPC,250B11
XP DCSA,300B11
XP DCSB,304B11
XP DTC,320B11
XP DTS,324B11
XP TMC,340B11
XP TMS,344B11 >>
;DEFINE EXTENDED OPERATIONS
XP PORTAL,PORTAL
XP JRSTF,JRSTF
XP HALT,HALT
XP XJRSTF,XJRSTF
XP XJEN,XJEN
XP XPCW,XPCW
XP JEN,JEN
XP XSFM,XSFM
XP JOV,JOV
XP JFOV,JFOV
XP JCRY0,JCRY0
XP JCRY1,JCRY1
XP JCRY,JCRY
> ;END IFE FTFILE
> ;END IF2
;ONLY STARTING ADDRESS FOR FILDDT AND VMDDT ON TOPS-10.
;NO START ADDRESS FOR EXEC OR USER DDT
;BECAUSE USER PROGRAMS AND MONITOR ARE LOADED
;WITH EXEC OR USER DDT
;BUT STILL WANT TO BE STARTED AT THEIR OWN START ADDRESSES.
;
;ON TOPS-20, ALL USER DDTS HAVE START ADDRESSES.
;THE MONITOR IGNORES THEM UNLESS USER RUNS DDT BY ITSELF
IFE FTDBUG,<
IFN FTFILE!FTVMX,<
END DDT> ;FILDDT OR VMDDT START ADDRESS
IFN FTDEC20&<^-FTEXEC>&<^-FTMON>&<^-FTFILE>,<
END <1,,DDT>> ;TOPS-20 ENTRY VECTOR
> ;END IFE FTDBUG
IF2,< ;ONLY KILL SYMBOLS PASS 2 WHEN DONE WITH THEM
IFN FTDBUG,<
IFN FTFILE!FTVMX,<
END DEBDDT> ;FILDDT OR VMDDT START ADDRESS
IFN FTDEC20&<^-FTEXEC>&<^-FTMON>&<^-FTFILE>,<
END <1,,DEBDDT>> ;TOPS-20 ENTRY VECTOR
PURGE DDT,DDTEND
IFE FTFILE,<
SYN $0BPT,$0DPT ;GENERATE DEBUGGING JSR ENTRY POINT
PURGE $0BPT
> ;END IFN FTFILE
IFN FTEXEC,<PURGE DDTX>
IFN FTMON,<PURGE MDDTX>
> ;END IFN FTDBUG
> ;END IF2
END